109385 Catalog

: Pdf 109385-Catalog 109385-Catalog 074983 Batch10 unilog

Open the PDF directly: View PDF .
Page Count: 124

Download
Open PDF In Browser	View PDF

Terminals

PANDUIT Termination Solutions
Success
Depends on the
Crimp.
A proper crimp is the key element
of an overall wire termination
assembly that unfortunately is all
too often overlooked.
Proper terminal selection, application and crimping are critical factors to
the safety, performance and reliability of an electrical connection.When
selected and installed properly, the function of a terminal is transparent
in the overall operation of a product; however, when selected or installed
improperly, it can result in rework, recalls and downtime, which could
result in loss of productivity and profitability.
To produce a high-quality crimp you can rely upon to resist failure, you
need the right terminal, right tool and right technique.
The purpose of the Technical Reference Guide is to give you the
necessary tools to:

• Select the right terminal for a specific application
• Select the right tool for the terminal and the application
• Produce a high-quality crimp

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A1

Terminals

Crimping Guidelines for PANDUIT ® PAN-TERM®
Terminals,Disconnects,Splices and Wire Joints
1. Select the proper PANDUIT terminal for the application and
wire size used
• Ring terminals are used
for high vibration and
grounding applications
• Fork terminals are used for static
(non-vibration) applications
• Disconnects are used for
applications that require quick
connection of wires without the use of tools
• Splices and wire joints are used to join wires together
2. Strip wire to the proper length as specified on:
• PANDUIT product
packaging label
• Packaging
instructions
included with the
PANDUIT product
• Or if no packaging
instructions are
available, plan your strip length so that 1/32 of an inch of
wire can be seen protruding through the tongue end of
the terminal barrel
3. Select the proper crimp tool to be used
• Use crimping tools that provide a UL Listed and/or CSA
Certified electrical termination, to assure a safe and
reliable connection
• PANDUIT terminals are UL Listed and CSA Certified when
crimped with PANDUIT plier type crimping tool or with the
preferred CONTOUR CRIMP ™ Controlled Cycle Crimping Tool
specified on the packaging label

Plier Type
Crimping Tool

A2

CONTOUR CRIMP ™
Controlled Cycle
Crimping Tool

Terminals

Crimping Guidelines for PANDUIT ® PAN-TERM®
Terminals,Disconnects,Splices and Wire Joints
(continued)
4. Select the proper crimp pocket for the terminals and wire
size you are using
• PANDUIT crimping tools simplify this process with color
coded crimp pockets. The yellow, blue and red pockets
are specifically designed for the industry standard barrel
sizes, each with a specific color code.

5. Perform the electrical crimp
For the plier type tool
Insulated Terminals and Disconnects
A. Locate terminal in appropriate size color-coded crimp die pocket
with tool centered on insulation sleeve. (See Note 1 page A6)
B. Rotate terminal so tongue is level with crimp die.
C. Insert properly stripped wire into terminal until a minimum of
1/32" of wire extends beyond the terminal barrel.
D. Squeeze tool handles firmly to perform the electrical crimp.
(See Note 2 page A6)
E. Provide second crimp on the flared portion of the insulation
housing to close the insulation as shown. Caution: when using
plier type crimping tools, do not squeeze as firmly as you did
for the electrical crimp. (See Note 3 page A6)

Step A

Step B

Step E

Steps C & D

Complete Crimp

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A3

Terminals

Crimping Guidelines for PANDUIT ® PAN-TERM®
Terminals,Disconnects,Splices and Wire Joints
(continued)
Non-Insulated Terminals and Disconnects
A. Locate terminal in appropriate wire gauge crimp die pocket
with indenter centered on barrel seam.
B. Rotate terminal so tongue is level with crimp die.
C. Insert properly stripped wire (based on recommendations on
package label) into terminal until a minimum of 1/32" of wire
extends beyond the terminal barrel.
D. Squeeze tool handles firmly to perform the electrical crimp.
(See Note 2 page A6)

Step A

Step B

Steps C & D

Complete Crimp
Insulated and Non-Insulated Parallel Splices
A. Locate parallel splice in appropriate wire gauge crimping die
pocket and position tool on the center of the splice.
B. Insert properly stripped wire (based on recommendations
on package label) into each end of the parallel splice.
C. Squeeze tool handles firmly. (See Note 2 page A6)
D. An insulation crimp is not required on an insulated
parallel splice.

Steps A & B

A4

Steps C & D

Complete Crimp

Terminals

Crimping Guidelines for PANDUIT ® PAN-TERM®
Terminals,Disconnects,Splices and Wire Joints
(continued)
Insulated and Non-Insulated Butt Splices
A. Locate butt splice in appropriate color-coded crimp die pocket
and position crimp halfway between the wire stop (center
of splice) and the end of the insulation crimp area. (See
Note 4 page A6)
B. Insert properly stripped wire (based on recommendations on
package label) into one end of butt splice.
C. Squeeze tool handles firmly to perform the electrical crimp.
(See Note 2 page A6)
D. Provide second crimp on the flared portion of the insulation
housing to close the insulation. Caution: When using plier
type crimping tools, do not squeeze as firmly as you did for
the electrical crimp. (See Note 3 page A6)
E. Repeat steps one to four for opposite end of butt splice.

Steps A & B

Steps C

Step D & E

Complete Crimp

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A5

Terminals

Crimping Guidelines for PANDUIT ® PAN-TERM®
Terminals,Disconnects,Splices and Wire Joints
(continued)
Insulated and Non-Insulated Wire Joints
A. Properly strip wires per manufacturer’s recommendations
on product package label.
B. Twist stripped wire ends together, and insert wires into
wire joint.
C. Locate wire joint in appropriate wire gauge crimp die pocket
and position crimp in the center of the metal insert.
D. Squeeze tool handles firmly to perform the electrical crimp.
(See Note 2 below)
Note: an insulation crimp is not required on an insulated
wire joint.

Steps 1 & 2

Steps 3 & 4

Complete Crimp

NOTES for Crimping with the preferred Hand Operated
Controlled Cycle Crimping Tools:
1. PANDUIT controlled cycle crimping tools properly locate rings, forks,
and barrel insulated disconnects, pins, and blades. No further
positioning is required.
2. When using the preferred controlled cycle tool, once a crimp has been
started, the ratchet device of controlled cycle tools will not release until
the crimp is complete, independent of operator expertise.
3. Controlled cycle tools provide the electrical crimp and the insulation
closure in a single cycle of the tool.
4. When using controlled cycle tooling, insulated butt splices must be
inserted from the back of the tool to ensure that the electrical and
insulation closure crimp pockets are properly aligned with the splice.

A6

Terminals

Crimping Guidelines for PANDUIT ® PAN-TERM®
Terminals,Disconnects,Splices and Wire Joints
(continued)
5. Perform the electrical crimp
using the preferred controlled cycle tool
A. Make sure the terminal barrel is centered correctly in the
right die pocket by using the product locator on the backside
of the tool.
B. Determine the correct die pocket to use based on the color
code of the terminal.
C. Squeeze the handles of the tool until one click is heard; this
click indicates the terminal is now held in place securely to
insert the wire.
D. Insert the wire and complete cycle to perform the electrical
and insulation crimp simultaneously.
E. Crimp complete.

Step A

Step B

Step D

Step C

Complete Crimp

6. Inspect the crimp
Note: If your crimp looks like any of the examples shown below,
cut off the terminal and recrimp. These crimps would
provide a poor connection!

Bent Back Strands

Over Crimp

Rotated Crimp

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A7

Disconnects
D, DR – Non-Insulated, Sleeve Barrel
(Includes Right Angle)

X
X
X

X

X
X
X
X
X
X
X
X
X
X
X
X
X

X
X
X

X
X
X
X

X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X

X
X
X

X

X
X
X
X

X
X

CT-720 Mechanical

CT-570CH

CT-550CH

X
X
X

CT-520CH

X
X
X

CT-500CH

9/32
9/32
9/32

X
X
X

CT-1701

22-18
16-14
12-10

CT-1570

X
X
X
X
X

CT-1551

X
X
X
X
X
X
X

CT-1550

X
X
X

CT-1525

X
X
X

CT-1015

X
X
X
X

CT-1014

X
X
X
X

CT-460

1/4
9/32
9/32
9/32
5/16
5/16
5/16
1/4
9/32
9/32
9/32
5/16
5/16
5/16

CT-400

26-22
22-18
16-14
12-10
22-18
16-14
12-10
26-22
22-18
16-14
12-10
22-18
16-14
12-10

CT-310

CT-260

BSV – Vinyl Insulated

CT-200

BSN – Nylon Insulated

CT-160

BSH – Heat Shrink

CT-100

Terminal Series
Butt Splices
BS – Non-Insulated Butt Splices

Controlled Cycle Hand Tools
CT-300-1

Plier Tools
Wire
Std.
Strip
Wire
Length
Range
(In.)
(AWG) [+1/32;-0]

Crimp Heads
for Pneumatic
CT-600 Tool

PANDUIT Installation Tooling for Terminals,
Disconnects and Splices

A8

Terminals

9/32
9/32
9/32

X
X
X

X
X

X
X
X

X
X
X

22-18

9/32

X

X

X

X

16-14

9/32

X

9/32
9/32
7/32
9/32
9/32
9/32
3/8
3/8

X
X
X

X

22-18
16-14
22-18
16-14
22-18
16-14
12-10
DPF-FI – Premium Nylon, Fully Insulated 12-10
DNF-FIB, DNF-FIM, DNF-FIMB,
22-18
DPF-FIB, DPF-FIMB, DNF-LPB,
DPF-LPB – Nylon & Premium Grade
16-14
Nylon, Fully Insulated, Funnel Entry,
Male/Female Couplers (not .110/.111) 12-10

X
X
X

X
X
X
X

9/32

X

9/32

X

DMF-FIB, DPF-FIB – Nylon Premium
Grade Nylon, Fully Insulated, Funnel
Entry, .110/.111 Tab Size
DNF-FIBX – Nylon, Expanded Wire
Entry, Fully Insulated
DNF-M – Nylon Insulated, Funnel
Entry, Barrel Insulated, Male

X
X
X

X
X

X

X

X

X

X
X
X
X
X
X

X
X
X
X

X
X
X

3/8

X
X
X
X
X

X
X
X
X
X

X
X
X

X

X
X
X

X
X

X
X

X
X
X
X

X

X

X

X

X

22-18

7/32

X

22-18
16-14
22-18
16-14
12-10

9/32
9/32
9/32
9/32
9/32

X
X
X
X

X

X
X

X
X
X

X

X

X
X
X

X
X
X

X
X

X
X
X

A9

Terminals

22-18
16-14
12-10

PANDUIT Installation Tooling for Terminals,
Disconnects and Splices (continued)

For service and technical support, call 800-777-3300
or visit www.panduit.com.

D-M – Non-Insulated Male Blade
Adapters
D-M – Non-Insulated Male
D-MB, DR-B – Non-Insulated Right
Angle Female & Non-Insulated Male
Butted Seam
DNF – Nylon, Funnel Entry, Barrel
Insulated (not .110/.111)
DNF-110, DNF-111 – Nylon, Funnel
Entry Barrel Insulated .110/.111 Tab Size
DNF-FI – Nylon, Fully Insulated

DV-M – Non-Insulated Male Blade
Adapters
DV-M – Non-Insulated Male
Disconnects

22-18

1/4

16-14

1/4

22-18
16-14
22-18
16-14
12-10
12-10
22-18
16-14
22-18
16-14

1/4
1/4
5/16
5/16
5/16
9/32
1/4
1/4
9/32
9/32

X
X
X
X
X

12-10

9/32

X

X
X
X
X
X
X
X
X
X
X
X
X

X
X
X
X

X
X
X

X
X

X

X
X
X
X

X
X

X
X

X
X
X

CT-720 Mechanical

CT-570CH

CT-550CH

CT-520CH

CT-500CH

X

CT-1701

X

CT-1570

CT-1525

CT-1015

CT-1014

CT-460

CT-400

CT-310

CT-300-1

CT-260

CT-200

X
X

CT-1551

DV – Vinyl Barrel Insulated Sleeve
DV-B – Vinyl Insulated, Butted Seam

9/32
9/32
11/32
11/32

Controlled Cycle Hand Tools
CT-1550

DNG-FL – Disco-Lok Nylon, Fully
Insulated
DNH – Heat Shrink

22-18
16-14
22-18
16-14

CT-160

Terminal Series
DNFR-B – Nylon Pre-Insulated,
Right Angle
DNFR-FIB – Nylon Butted Seam,
Right Angle
DNG-FB – Supra Grip Nylon Fully
Insulated (Except DNG14-187FB &
DNG14-188FB)

CT-100

Plier Tools
Wire
Std.
Strip
Wire
Length
Range
(In.)
(AWG) +1/32;-0]

Crimp Heads
for Pneumatic
CT-600 Tool

PANDUIT Installation Tooling for Terminals,
Disconnects and Splices (continued)

A10

Terminals

9/32
9/32
1/4
1/4
9/32
9/32

X
X
X
X

J – Non-Insulated J214-312,
J318-412,
J216-410

18-12
18-12
16-10
24-16
22-14
18-12
14-12

1/2
1/2
3/4
7/16
7/16
1/2
5/8

X
X
X
X
X

X
X
X
X

16-12

9/32

X

X

X

X

X

22-18
16-14
12-10
8
6
4
2
22-26
22-18
16-14
12-10

9/32
9/32
9/32
3/8
7/16
1/2
1/2
3/16
7/32
7/32
9/32

X
X
X

X
X
X

X
X
X

X
X
X

X
X
X

X
X
X
X

X
X
X

X
X
X
X

X
X
X
X

X
X
X

JN – Nylon Insulated JN224-318,
JN218-216,
JN418-212,
JN314-212
Terminals
P-HDR – Non-Insulated Heavy
Duty Rings
P-P – Non-Insulated Pin Terminals

P-R – Non-Insulated Large Ring
Terminals

P-R, P-R, P-LF, P-SLF, P-FF –
Non-Insulated Rings, Forks, Locking
Forks, Short Locking Forks, Flanged
Forks

X
X
X
X

X

X
X

X
X
X
X
X
X

X
X
X
X

X
X
X

X
X
X

X
X
X
X
X
X

X
X
X
X
X
X

X
X

X
X
X

X
X
X
X

X
X
X

X

X
X
X
X
X

X

X
X
X
X

X
X
X

Terminals

A11

22-18
16-14
22-18
16-14
22-18
16-14

PANDUIT Installation Tooling for Terminals,
Disconnects and Splices (continued)

For service and technical support, call 800-777-3300
or visit www.panduit.com.

DV-MB – Vinyl Insulated Butted Seam
Male Disconnects
DV-P – Vinyl Insulated Piggyback
Disconnects
DVF – Vinyl Funnel Entry Barrel
Insulated Female Disconnect
Wire Joints

PH – Heat Shrink Terminals

PK-R – KYNAR* Rings

PN-R, PN-RX, PN-F, PN-LF, PN-FF,
PNF-R, PNF-F, PNF-LF – Nylon &
Nylon Funnel Entry Forks, Locking
Forks, Flanged Forks (Includes
Expanded Insulated)
PN-HDR, PN-HDRX – Nylon Insulated
Heavy Duty & Nylon Expanded
16-12
Insulated Heavy Duty Rings
PN-SLF, PNF-SLF – Nylon Insulated
22-18
Short Locking Forks
16-14
12-10

X
X
X

X
X
X

X

X
X
X
X
X
X
X
X
X
X

X
X
X

X
X
X

X
X

X
X

X
X
X

X
X
X

X
X

9/32

X

X

X

7/32
7/32
9/32

X
X

X
X
X

X
X
X

X
X
X

X
X
X
X
X
X
X
X

X
X

X
X
X

CT-720 Mechanical

CT-570CH

CT-550CH

CT-520CH

CT-500CH

CT-1701

CT-1570

CT-1551

CT-1550

CT-1525

CT-1015

CT-1014

X
X
X

CT-460

X
X
X

CT-400

X
X
X

CT-310

X
X
X

CT-300-1

CT-260

9/32
9/32
9/32
5/16
5/16
5/16
7/32
7/32
9/32
3/16
7/32
7/32
9/32

CT-200

22-18
16-14
12-10
22-18
16-14
12-10
22-18
16-14
12-10
26-22
22-18
16-14
12-10

CT-160

Terminal Series
P-RHT6 – High Temperature Rings

Wire
Std.
Strip
Wire
Length
Range
(In.)
(AWG) [+1/32;-0]

Crimp Heads
for Pneumatic
CT-600 Tool

Controlled Cycle Hand Tools

CT-100

Plier Tools

PANDUIT Installation Tooling for Terminals,
Disconnects and Splices (continued)

A12

Terminals

PV-HDR, PV-HDRX – Vinyl Insulated
Heavy Duty Rings
PV-LF, PV-LFX – Vinyl Insulated
Locking Forks (includes Expanded
Insulation)

5/16
5/16
7/16
5/16
5/16
7/16

16-12

5/16

X
X
X
X

A13

22-18
5/16
X
16-14
5/16
X
12-10
5/16
X
PV-P – Vinyl Insulated Pin Terminals
22-18
5/16
X
16-14
5/16
X
12-10
5/16
X
PV-R, PV-F, PV-FF, PV-RX,
26-22
3/16
X
PV-FX – Vinyl Insulated Rings & Forks 22-18
5/16
X
(includes Expanded Insulation)
16-14
5/16
X
12-10
5/16
X
PV-R, PV-RX – Vinyl Insulated Large
8
3/8
Ring Terminals
6
7/16
4
1/2
2
1/2
PV-SLF – Vinyl Insulated Short
22-18
5/16
Locking Forks
16-14
5/16
12-10
5/16
*KYNAR is a registered trademark of Atofina Chemicals, Inc.
‡Use Die CD-700P-8-2

X
X
X
X

X
X
X
X
X
X

X
X
X

X
X

X
X
X
X

X
X
X

X
X
X

X
X
X

X
X

X

X

X
X
X
X
X
X

X
X
X
X
X
X

X
X

X

X
X
X

X
X
X

X
X

X
X

X
X
X

X
X

X
X
X
X
X
X
X
X
X
X
X‡
X‡
X‡
X‡

X
X

X
X

X
X
X

X
X
X

X
X

X
X
X

Terminals

For service and technical support, call 800-777-3300
or visit www.panduit.com.

PSN – Nylon Insulated Parallel
Splices

22-18
20-16
14-12
22-18
20-16
14-12

PANDUIT Installation Tooling for Terminals,
Disconnects and Splices (continued)

PS – Non-Insulated Parallel Splices

Terminals

PANDUIT Installation Tooling for Tubular
Ring Terminals

Tooling

CT-1700

CT-720

CT-930,
CT-930CH,
CT-980,
CT-920,
CT-920CH, CT-980CH,
CT-2950,
CT-2920,
CT-2980
CT-940CH

CT-2001

PANDUIT Die Part Number
Die Index Number
(Number of Crimps)
®

PANDUIT ®
Part Number
S8-10R-Q
S8-14R-Q
S8-56R-Q
S8-38R-Q
S6-10R-E
S6-14R-E
S6-56R-E
S6-38R-E
S4-10R-E
S4-14R-E
S4-56R-E
S4-38R-E
S2-10R-X
S2-14R-X
S2-56R-X
S2-38R-X
S2-12R-X
S1/0-14R-X
S1/0-56R-X
S1/0-38R-X
S1/0-12R-X
S2/0-14R-X
S2/0-56R-X
S2/0-38R-X
S2/0-76R-X
S2/0-12R-X
S3/0-14R-5
S3/0-56R-5
S3/0-38R-5
S3/0-76R-5
S3/0-12R-5
S4/0-38R-5
S4/0-76R-5
S4/012R-5
S250-56R-5
S250-38R-5
S250-76R-5
S250-12R-5

A14

P21
(2)

CD-720-1
P21
(1)

CD-920-8
P21
(1)

—

CD-2001-8
P21
(1)

P24
(2)

CD-720-1
P24
(1)

CD-920-6
P24
(1)

—

CD-2001-6
P24
(1)

P29
(2)

CD-720-1
P29
(1)

CD-920-4
P28
(1)

STD
(1)

CD-2001-4
P29
(1)

P37
(3)

CD-720-2
P37
(1)

CD-920-1
P37
(1)

STD
(1)

CD-2001-1
P37
(1)

—

CD-720-2
P42
(1)

CD-920-1/0
P42
(1)

STD
(1)

CD-2001-1/0
P42
(1)

—

CD-720-2
P45
(2)

CD-920-2/0
P45
(1)

STD
(1)

CD-2001-2/0
P45
(2)

—

CD-720-2
P50
(2)

CD-920-3/0
P50
(1)

STD
(1)

CD-2001-3/0
P50
(2)

—

CD-720-3
P54
(2)

CD-920-4/0
P54
(1)

STD
(1)

CD-2001-4/0
P54
(2)

—

CD-720-3 CD-920-250
P62
P62
(2)
(1)

STD
(1)

CD-2001-250
P62
(2)

Terminals

PANDUIT Installation Tooling for Ferrules

FSD, FSF Insulated
Single Wire
Ferrules (DIN
or French
color code)

FTD

Insulated
Twin Wire
Ferrules

.25-1.00
1.50-2.00
4.00-6.00
10.0-16.0
25.0-35.0
50.0
.41-1.00
1.50-2.00
4.00-6.00
10.0-16.0
25.0-35.0
50.0
.50-1.00
1.50-2.00
4.00-6.00

X
X
X

X
X
X
X

X

CT-1006

24-18
16-14
12-10
8-6
4-2
1
26-18
16-14
12-10
8-6
4-2
1
22-18
16-14
12-10

Wire
Strip
Length

CT-1005

Wire
Range
(mm²)

CT-1004

Wire
Range
(AWG)

CT-1003

PANDUIT
Ferrule
Ferrule
Series
Description
F
Non-Insulated
Ferrules

CT-1002

Controlled Cycle
Hand Tools

X
X
Varies

X
X
X

X
X
X
X

X
X
X

X
X

X
X
X

For service and technical support, call 800-777-3300
or visit www.panduit.com.

X

A15

Terminals

Termination Tooling
Hand Operated Plier Type Tools
• Installer controlled crimp
• General purpose
• Plier type crimp for #22 thru #10 insulated
and non-insulated terminal products
CT-260

CT-200

CT-160

CT-100
Std.
Pkg.
Qty.
1

Part Number
CT-260

Part Description
Crimps insulated and non-insulated terminals.
Forged steel tool. Cuts wire.

CT-200

Crimps most PANDUIT #18 – #10 AWG
non-insulated terminals, disconnects and splices.
Forged steel tool. Cuts wire.

1

CT-160

Crimps most PANDUIT #26 – #10 AWG insulated
and non-insulated terminals, disconnects and
splices. Cuts three U.S. and three Metric
screw sizes. Cuts and strips wire. Has insulation
closure pocket.

1

CT-100

Crimps most PANDUIT #26 – #10 AWG insulated
and non-insulated terminals, disconnects and
splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts
and strips wire. Excellent all-around application
tool of heat treated finished steel with comfortable
cushioned plastic grip handles.

1

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A16

CT-1525

CT-1550

• Specifically designed for the installation of
PAN-TERM ® terminals, disconnects and splices
• Controlled cycle mechanism assures high
quality, consistent terminations
• Ergonomic tool design assures operator
comfort, safety, and performance
• Polypropylene handles provide chemical
resistance and a cushioned, non-slip grip
• Multi-position locator facilitates a high quality
repeatable crimp

CT-1551

CT- 1700

CT-1014

CT-1570

CT-1701

CT-1015

Part
Number
CT-1525

Part Description
Crimps PANDUIT #26 – #22 AWG insulated
terminals and splices, #22 – #10 AWG fully
insulated disconnects and insulated parallel splices.
Crimps PANDUIT #22 – #14 AWG barrel
insulated disconnects.
CT-1550 Crimps most PAN-TERM ® #22 – #10 AWG nylon and
vinyl insulated terminals, splices and disconnects.
The CT-1550 has the red/blue pocket closest to the
pivot which provides a reduced crimp effort for those
who make red/blue terminations.
CT-1551
Crimps most PAN-TERM ® #22 – #10 AWG nylon and
vinyl insulated terminals, splices and disconnects.
The CT-1551 has the yellow pocket closest to the
pivot which provides a reduced crimp effort for those
who make yellow terminations.
CT-1570
Crimps most PAN-TERM ® #22 – #10 AWG and
.5 – 6.0mm non-insulated terminals and disconnects.
Crimps PANDUIT #22 – #10 AWG and .5 – 6.0mm
non-insulated splices, and #10 AWG compression lugs.
CT-1700 Crimps PANDUIT #8 – #2 AWG non-insulated tubular
terminals (S series), #8 – #1 AWG copper lugs and
splices, #6 – #4 AWG aluminum lugs and splices and
CTAPF copper taps for #14 – #3 AWG. Includes five
position, color coded rotating die.
CT-1701
Crimps PANDUIT #10 – #2 AWG non-insulated large
gauge ring terminal (P series). Crimps #8 – #1 AWG
copper lugs and splices, and #6 – #4 AWG aluminum
lugs and splices, and #14 – #3 AWG CTAPF copper
taps. Includes 5 position rotating die.
CT-1014
Crimps PANDUIT #22 – #14 AWG loose piece
DISCO-LOK ™ disconnects.
CT-1015
Crimps PANDUIT #22 – #14 AWG loose piece
SUPRA-GRIP ™ disconnects.
Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

Terminals

CONTOUR CRIMP ™ Controlled Cycle Tools

Std.
Pkg.
Qty.
1

1

1

1

1

1

1
1

A17

Terminals

Controlled Cycle Crimping Tools
• Speciality crimping tools for fully
insulated right angle disconnects and
heat shrink insulated terminals,
disconnects, and splices.

Part
Number
CT-300-1

Part Description
Crimps PANDUIT #22 – #14 AWG fully insulated
right angle disconnects. (DNFR-FIB series).

Std.
Pkg.
Qty.
1

Ferrule End Sleeve Crimping Tools

CT-1002

CT-1003

• Specifically designed for the installation of
PAN-TERM ® ferrules
• Controlled cycle mechanism assures high
quality, consistent terminations
• Ergonomic tool design assures operator
comfort, safety and performance
• Multi-position locator facilitates a high
quality repeatable crimp

CT-1005

CT-1004
Part
Number
CT-1002

CT-1006

Part Description
Crimps PANDUIT #26 – #10 AWG single vinyl
insulated ferrules (DIN). #26 – #10 AWG single
wire insulated ferrules (French).
#22 – #12 AWG vinyl insulated dual-wire ferrules
(DIN). #24 – #10 AWG non-insulated ferrules.

Std.
Pkg.
Qty.
1

CT-1003

Crimps PANDUIT #22 – #8 AWG single wire
insulated ferrules (DIN). #22 – #8 AWG single wire
vinyl insulated ferrules (French). #22 – #10 AWG
vinyl insulated dual-wire (DIN) ferrules. #22 – #10
AWG non-insulated ferrules.

1

CT-1004

Crimps PANDUIT #8 – #6 AWG single wire vinyl
insulated ferrule (DIN). #8 – #6 AWG single wire
vinyl insulated ferrules (French).
#10 AWG vinyl insulated dual-wire (DIN) ferrule.
#8 – #6 AWG non-insulated ferrules.

1

CT-1005

Crimps PANDUIT #4 – #2 AWG single wire vinyl
insulated ferrule (DIN). #4 – #2 AWG single wire
vinyl insulated ferrules (French).
#4 – #2 AWG non-insulated ferrules.

1

CT-1006

Crimps PANDUIT #1 AWG single wire vinyl
insulated ferrule (DIN) and (French). #1 AWG
non-insulated ferrules.

1

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A18

CST101

• Strips and cuts 10 – 20 AWG wire
• Lightweight and durable for comfortable
long use
• Rust resistant coating included to improve
durability of tool

Terminals

Cable Stripping Tools for Small
Cable Sizes

CST115
Part
Number
CST101

Part Description
V notch wire stripper.

CST115

Plier nose wire stripper.

Std.
Pkg.
Qty.
1
1

Cable Stripping Tool for Large Cable Sizes
• Cutting blade provides circular, spiral and
in-line insulation cutting
• Cutting blade easily adjusts to proper
height to cut insulation without nicking
conductor strands
• Unique blade profile for long life, low friction
stripping of difficult insulations like rubber
and silicon
• Ergonomic shape for safe comfortable use
• Compact design

Item
Part Description
CST114-157 Cable stripping tool for stripping insulation from
cables 3/16" to 1 9/16" diameter. Includes
replacement cutting blade. Warranty: 90 days

Std.
Pkg.
Qty.
1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A19

Terminals

Features and Benefits – PAN-TERM ® Terminals
All PANDUIT Terminals feature high quality materials made with
electrolytic copper for high conductivity and are tin plated for
corrosion resistance.

Non-Insulated Terminals
Type P
Maximum recommended
operating temperature 150°C (302°F)
Extended barrel length
assures a good quality
crimp and makes
crimping easier

Product
markings
provide easy
identification of
wire size

Brazed seam
assures crimp reliability

Internal barrel serrations
assure good wire
contact and maximum
tensile strength
Internally beveled
barrel for quick easy
wire insertion

UL and CSA rated up to 2000V per UL486A.
Nickel plated terminals rated up to 343°C (650°F)
maximum operating temperature.

Nylon Insulated Terminals With
Insulation Grip Sleeve
Type PN or PNF
Internal barrel
serrations assure
good wire contact
and maximum
tensile strength
Insulation grip sleeve
provides a superior
insulation crimp for high
vibration and high strain
relief applications

Funnel entry for
faster insertion and
lower installed cost

Maximum
insulation
temperature
105°C (221°F)

Color coded
insulation identifies
wire range

UL and CSA rated up to 600V per UL486.
Flammability – UL94V-2/HB.
Proprietary blend of UL94V-2 and UL94HB
flammability rated materials.

A20

Terminals

Features and Benefits – PAN-TERM ® Terminals
(continued)
Vinyl Insulated Terminals With
Insulation Support
Type PV
Internal barrel
serrations assure
good wire contact
and maximum
tensile strength
Insulation crimp
provides insulation
support to protect
electrical crimp

Funnel entry for faster
insertion and lower
installed cost

Maximum insulation
temperature 105°C (221°F)

Brazed seam assures
crimp reliability

Color coded insulation
identifies wire range

UL and CSA rated up to 600V per UL486.
Flammability – UL94V-0.

Non-Insulated Seamless Tubular Terminals
Type S
Internally beveled
barrel for quick
easy wire insertion

Inspection hole allows
visual inspection for
proper wire insertion
Product markings
provide easy
identification of
wire sizes

Seamless tubular
barrel provides
consistent, high
performance,
quality crimps
Maximum recommended
operating temperature
150°C (302°F)

Double thickness
provides a strong
ring tongue

UL and CSA rated up to 2000V per UL486A.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A21

Terminals

Ring Terminal, Vinyl Insulated –
Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications to provide
a reliable connection
• Brazed seam protects terminal barrel
from splitting during the
crimp process

Part Number
PV18-4R-CY
PV18-6R-CY
PV18-8R-CY
PV18-10R-CY
PV18-14R-CY
PV18-56R-CY
PV18-38R-CY
PV14-4R-C
PV14-6RN-C
PV14-6R-C
PV14-8R-C
PV14-10R-C
PV14-14R-C
PV14-56R-C
PV14-38R-L
PV10-6R-L
PV10-8R-L
PV10-10R-L
PV10-14R-L
PV10-56R-L
PV10-38R-L

Stud
Size
#4
#6
#8
#10
1/4"
5/16"
3/8"
#4
#6
#6
#8
#10
1/4"
5/16"
3/8"
#6
#8
#10
1/4"
5/16"
3/8"

Wire Range

22 – 18
AWG

16 – 14
AWG

12 – 10
AWG

Color
Code

Red

Blue

Yellow

Tool

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

Std.
Pkg.
Qty.**
100
100
100
100
100
100
100

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

100
100
100
100
100
100
100
50

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

50
50
50
50
50
50

**To order in bulk, replace -C or -CY in the part number with -M or -MY for
a bulk package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SAC-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A22

Terminals

Multiple Stud Terminal, Vinyl Insulated –
Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications for a
reliable connection
• Brazed seam protects terminal barrel
from splitting during the
crimp process

Part Number
PV18-610R-CY
PV14-610R-C
PV10-610R-L

Stud
Size

#6, #8,
#10

Wire Range
22 – 18
AWG
16 – 14
AWG
12 – 10
AWG

Color
Code
Red
Blue
Yellow

Tool

Std.
Pkg.
Qty.**
100

CT-100,
CT-600‡,
CT-1550‡,
CT-1551‡

100
50

**To order in bulk, replace -C or -CY in the part number with -M or -MY for
a bulk package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

Ring Terminal, Vinyl Expanded Insulation
• Insulation support helps to prevent wire
damage in bending applications
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Expanded funnel entry designed to
accommodate wire with a larger than
standard outside diameter insulation

Part Number
PV14-10RX-C

Stud
Size
#10

PV10-10RX-L

#10

PV10-14RX-L

1/4"

Wire
Range
16 – 14
AWG
12 – 10
AWG

Color
Code
Blue
Yellow

Tool
CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

Std.
Pkg.
Qty.**
100
50
50

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A23

Terminals

Ring Terminal, Non-Insulated
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Barrel of terminal internally beveled to
provide quick and easy
wire insertion

Part Number
P18-6R-C
P18-8R-C
P18-10R-C
P18-14R-C
P14-6R-C
P14-8R-C
P14-10R-C
P14-14R-C
P14-56R-C
P14-38R-C
P10-6R-L
P10-8R-L
P10-10R-L
P10-14R-L
P10-56R-L
P10-38R-L

Stud
Size
#6
#8
#10
1/4"
#6
#8
#10
1/4"
5/16"
3/8"
#6
#8
#10
1/4"

Wire
Range

Tool

22 – 18 AWG

16 – 14 AWG

CT-100‡,
CT-200‡,
CT-600‡,
CT-1570‡

Std.
Pkg.
Qty.**
100
100
100
100
100
100
100

12 – 10 AWG

5/16"
3/8"

100
100
100
50
50
50
50
50
50

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A24

Terminals

Fork Terminal, Vinyl Insulated –
Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications
• Brazed seam protects terminal
barrel from splitting during the
crimp process

Part Number
PV22-6F-C*

PV18-6FN-CY
PV18-6F-CY
PV18-8F-CY
PV18-10F-CY
PV14-6FN-C
PV14-6F-C
PV14-8F-C
PV14-10FN-C
PV14-10F-C
PV14-14F-C
PV10-6F-L
PV10-8F-L
PV10-10F-L
PV10-14F-L

Stud
Size
#6

#6
#6
#8
#10
#6
#6
#8
#10
#10
1/4"
#6
#8
#10
1/4"

Wire Range
26 – 22
AWG

22 – 18
AWG

16 – 14
AWG

12 – 10
AWG

Color
Code

Std.
Pkg.
Qty.**
100

Yellow

Tool
CT-100,
CT-600,
CT-1525

Red

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

100
100
100
100

Blue

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

100
100
100
100
100
100

Yellow

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

50
50
50
50

*Not UL Listed or CSA Certified.
**To order in bulk, replace -C or -CY in the part number with -M or -MY
for a bulk package of 1000 and replace -L with -D for a bulk package
of 500.
‡UL and CSA approved tooling/product combinations.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A25

Terminals

Fork Terminal, Non-Insulated
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Barrel of terminal internally
beveled to provide quick and
easy wire insertion

Part Number
P22-4F-C*

Stud
Size
#4

P18-6FN-C
P18-6F-C
P18-8F-C
P18-10F-C
P14-6F-C
P14-8F-C
P14-10F-C
P10-6F-L

#6
#6
#8
#10
#6
#8
#10
#6

P10-8F-L

#8

P10-10F-L

#10

Wire
Range
26 – 22
AWG

Tool
CT-100, CT-200

22 – 18
AWG

CT-100‡, CT-200‡,
CT-600‡, CT-1570‡

16 – 14
AWG

CT-100‡, CT-200‡,
CT-600‡, CT-1570‡

12 – 10
AWG

Std.
Pkg.
Qty.**
100

CT-100‡, CT-200‡,
CT-600‡, CT-1570‡,
CT-1701‡
CT-100‡, CT-200‡,
CT-600‡, CT-1570‡,
CT-1701‡

100
100
100
100
100
100
100
50
50
50

*Not UL Listed or CSA Certified.
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A26

Terminals

Locking Fork Terminal, Vinyl Insulated –
Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications
• Brazed seam protects terminal
barrel from splitting during the
crimp process

Part Number
PV18-6LF-CY

Stud
Size
#6

Wire
Range

PV18-8LF-CY

#8

PV18-10LF-CY

#10

22 – 18
AWG

PV14-6LF-C

#6

PV14-8LF-C

#8

PV14-10LF-C

#10

PV10-6LF-L

#6
#8
#10
1/4"

PV10-8LF-L
PV10-10LF-L
PV10-14LF-L

Color
Code

16 – 14
AWG

12 – 10
AWG

Tool

Std.
Pkg.
Qty.
100

Red

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

Blue

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

100

CT-100‡,
CT-600‡,
CT-1550‡,
CT-1551‡

50
50
50
50

Yellow

100
100
100

100

**To order in bulk, replace -C or -CY in the part number with -M or -MY
for a bulk package of 1000 and replace -L with -D for a bulk package
of 500.
‡UL and CSA approved tooling/product combinations.

Locking Fork Terminal, Non-Insulated
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Barrel of terminal internally
beveled to provide quick and
easy wire insertion
Std.
Pkg.
Qty.**
100

Stud
Size
#6

Wire
Range
22 – 18
AWG

Tool
CT-100‡, CT-200‡,
CT-600‡, CT-1570‡

P14-6LF-C

#6

16 – 14
AWG

CT-100‡, CT-200‡,
CT-600‡, CT-1570‡

100

P10-10LF-L

#10

12 – 10
AWG

CT-100‡, CT-200‡,
CT-600‡, CT-1570‡,
CT-1701‡

50

Part Number
P18-6LF-C

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.
Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A27

Terminals

Pin Terminal, Vinyl Insulated –
Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications for a
reliable connection
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Solid pin designed to prevent damage to
the wire from over tightening, resulting in a
reliable electrical connection

Part Number
PV18-P47-CY

Stud Size Wire Range
—
22 – 18
AWG

Std.
Pkg.
Qty.
100

Tool
CT-100, CT-260,
CT-1550, CT-1551

PV14-P47-C

—

16 – 14
AWG

CT-100, CT-260,
CT-1550, CT-1551

100

PV10-P55-L

—

12 – 10
AWG

CT-100, CT-260,
CT-1550, CT-1551

50

**To order in bulk, replace -C or -CY in the part number with -M or -MY
for a bulk package of 1000 and replace -L with -D for a bulk package
of 500.

Pin Terminal, Non-Insulated
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Barrel of terminal internally beveled to
provide quick and easy wire insertion
• Solid pin designed to prevent damage to
the wire from over tightening, resulting in a
reliable electrical connection
Std.
Pkg.
Qty.**
100

Stud
Size
—

Wire
Range
22 – 18
AWG

Tool
CT-100, CT-200,
CT-260, CT-1570

P14-P47-C

—

16 – 14
AWG

CT-100, CT-200,
CT-260, CT-1570

100

P10-P55-L

—

12 – 10
AWG

CT-100, CT-200,
CT-260, CT-1570

50

Part Number
P18-P47-C

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A28

PAN-TERM ® disconnects are fabricated from brass and are
electro-tin plated for a long, corrosion resistant operating life.

Terminals

Features and Benefits – PAN-TERM ® Disconnects
Nylon Fully Insulated
Female Receptacles and Male Tabs
Type DNF-FIB
Available in tab
sizes to
accommodate
.110", .187", .205"
or .250" tabs

Fully insulated
design provides
protection from
electrical shorts

Expanded wire entry
(on select sizes)
accommodates
large insulation or
multiple wires
Maximum
insulation
temperature
105°C (221°F)
Insulation support
restricts excessive wire
movement to minimize
stress on crimp joint

Funnel entry for
faster wire insertion
and lower installed cost

UL and CSA rated up to 600V per UL310.

DISCO-GRIP ™ Premium Nylon Fully Insulated
Female Receptacles and Male Tabs
Type DNF and DPF
Available in tab
sizes to
accommodate
.250" tabs

Maximum
insulation
temperature
105°C (221°F)

Fully insulated
design provides
protection from
electrical shorts

Funnel entry
for faster
wire insertion
and lower
installed cost
UL and CSA rated up to 600V per UL310.
Male products available .250" width in standard
and oversized housing configurations.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A29

Terminals

Features and Benefits – PAN-TERM ® Disconnects
(continued)
SUPRA-GRIP ™ Nylon Fully
Insulated Female Disconnects
Type DNG-FB
Available in tab sizes
to accommodate
.187" or .250" tabs

Fully insulated
design provides
protection from
electrical shorts

Maximum
insulation
temperature
105°C (221°F)
Funnel entry
for faster
wire insertion
and lower
installed cost

Fully integrated metal
insulation grip for high
vibration, high strain
relief, and double
crimp requirements
UL and CSA rated up to 600V per UL310.

DISCO-LOK ™ Nylon Fully Insulated
Locking Female Disconnects
Type DNG-FL
Available in tab sizes
to accommodate
250" tabs

Unique locking mechanism
allows for low insertion forces
(mating) and positive locking
for secure connections

Maximum
insulation
temperature
105°C (221°F)
Insulation grip sleeve
provides a superior insulation
crimp for high vibration and
high strain relief applications
UL and CSA rated up to 300V.

A30

Funnel entry for
faster wire insertion
and lower installed cost

Nylon Barrel Insulated
Female Receptacles and Male Tabs
Type DNF

Terminals

Features and Benefits – PAN-TERM ® Disconnects
(continued)

Maximum insulation
temperature 105°C (221°F)

Available in tab
sizes to
accommodate
.110", .187",
.205" or
.250" tabs

Insulation grip sleeve provides
a superior insulation crimp for
high vibration and high strain
relief applications

Funnel entry
for faster
wire insertion
and lower
installed cost

UL and CSA rated up to 300V.
Male products available .250" width.

Vinyl Barrel Insulated
Female Receptacles and Male Tabs
Type DV and DVF
Available in
tab sizes to
accommodate
.187", .205"
or .250" tabs

Maximum insulation
temperature 105°C (221°F)

Insulation support to
protect electrical crimp
UL and CSA rated up to 600V.
Male products available .250" width.
Flammability – UL94V-0.

Non-Insulated Female Receptacles and Male Tabs
Type D
Available in tab sizes
to accommodate
.187" or .250" tabs

Sleeved barrel assures
crimp reliability
Maximum recommended
operating temperature
150°C (302°F)
Male products available .250" width.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A31

Terminals

PAN-TERM ® Disconnects
Female Disconnect Nylon Fully
Pre-Insulated – Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications
• Internal wire stop assures proper length of
insertion into terminal barrel

Part Number
DNF18-110FIB-C

Tab
Size
(In.)
.110 x .032

DNF18-111FIB-C

.110 x .020

DNF18-187FIB-C

.187 x .032

DNF18-188FIB-C

.187 x .020

DNF18-205FIB-C

.205 x .032

DNF18-206FIB-C

.205 x .020

DNF18-250FIB-C

.250 x .032

100

DNF14-187FIB-C

.187 x .032

100

DNF14-188FIB-C

.187 x .020

DNF14-205FIB-C

.205 x .032

DNF14-206FIB-C

.205 x .020

DNF14-250FIB-C

.250 x .032

DNF10-250FIB-L

.250 x .032

Wire
Range

Color
Code

Tool

Std.
Pkg.
Qty.**
100
100

22 – 18
AWG

Red

CT-100,
CT-600,
CT-1525‡

100
100
100
100

16 – 14
AWG

Blue

CT-100,
CT-600,
CT-1525‡

100
100
100
100

12 – 10 Yellow
AWG

CT-1525‡

50

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A32

Terminals

Male /Female Coupler, Nylon Fully
Pre-Insulated – Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications
• Internal wire stop assures proper
length of insertion into
terminal barrel
Tab
Size
(In.)

Std.
Pkg.
Part Number
Tool
Qty.**
CT-100‡, CT-600, 100
DNF18-250FIM-C
CT-1525‡
.250 x 22 – 18
Red
.032
AWG
DNF18-250FIB-C
CT-100, CT-600,
100
CT-1525‡
100
DNF14-250FIM-C .250 x 16 – 14
CT-600,
Blue
.032
AWG
CT-1525‡
DNF14-250FIMB-L
50
CT-600‡,
50
DNF10-250FIMB-L*
CT-1550‡,
CT-1551‡
.250 x 12 – 10
Yellow CT-100‡, CT-460‡, 50
DNF10-250FI-L
.032
AWG
CT-550‡, CT-600‡,
CT-1550‡,
CT-1551‡
Wire
Range

Color
Code

*UL Listed only.
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

Female Disconnect, Vinyl Barrel
Insulated – Butted Seam
• Insulation support helps to prevent wire
damage in bending applications

*Recognized
Tab
Size
Part Number
(In.)
DV18-187B-CY
.187 x .032
DV18-188B-CY
.187 x .020
DV18-250B-CY .250 x .032
DV14-187B-C*
.187 x .032
DV14-188B-C*
DV14-205B-C*
DV14-250B-C*

.187 x .020
.205 x .032
.250 x .032

Wire
Range

Color
Code

Tool

22 – 18
AWG

Red

CT-1525‡

16 – 14
AWG

Blue

CT-1525^

Std.
Pkg.
Qty.**
100
100
100
100
100
100
100

*UL Recognized and CSA approved.
**To order in bulk, replace -C or -CY in the part number with -M or -MY for
a bulk package of 1000.
^CSA approved tooling/product combinations.
‡UL and CSA approved tooling/product combinations.
Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A33

Terminals

Female Disconnect, Non-Insulated –
Butted Seam
• Non-insulated barrel can be used to
provide an economical termination when
insulation is not required

Part Number
D14-250B-C

Tab
Size
(In.)
.250 x .032

Wire
Range
16 – 14 AWG

Tool
CT-100

Std
Pkg.
Qty.**
100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.

Piggyback Disconnect, Vinyl Insulated
• Metal insulation grip sleeve crimps to wire
insulation providing protection to the crimp
joint during high vibration applications
• Combination of female disconnect and male
tab allows versatility in points of connection
• Multiple connection points allow additional
circuits to be added to existing
equipment without
expensive rework

Part Number
DV18-250P-CY
DV14-250P-C

Tab
Size
(In.)
.250 x
.032

Color
Wire Range Code
22 – 18
Red
AWG
16 – 14
Blue
AWG

Tool
CT-100,
CT-260,
CT-1550,
CT-1551

Std.
Pkg.
Qty.**
100
100

**To order in bulk, replace -C or -CY in the part number with -M or -MY
for a bulk package of 1000.

Disconnect Adapter, Non-Insulated
• Converts one male tab to two male tabs,
allowing two female disconnects to be
connected to the same circuit

Part Number
D-250A-C

Tab
Size
(In.)
.250 x .032

Wire
Range
—

Std.
Pkg.
Qty.**
100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.
◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A34

Terminals

Right Angle Female Disconnect, Nylon
Fully Insulated – Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications
• Right angle design allows low
profile routing of wire in limited
application space
Tab
Wire
Size
Part Number
Range
(In.)
DNFR18-250FIB-C .250 x .032 22 – 18
AWG
DNFR14-250FIB-C .250 x .032 16 – 14
AWG

Color
Code
Red
Blue

Std.
Pkg.
Tool
Qty.**
CT-300-1 100
CT-300-1

100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.

Right Angle Female Disconnect, Nylon
Insulated – Funnel Entry
• Insulation support helps to prevent wire
damage in bending applications
• Right angle design allows low profile
routing of wire in limited
application space

Tab
Wire
Size
Part Number
Range
(In.)
DNFR18-250B-C
.250 x .032 22 – 18
AWG
DNFR14-250B-C .250 x .032 16 – 14
AWG

Color
Code
Red
Blue

Std.
Pkg.
Tool
Qty.**
CT-1525‡ 100
CT-1525‡

100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.
‡UL and CSA approved tooling/product combinations.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A35

Terminals

Right Angle Female Disconnect,
Non-Insulated – Metal Sleeve
• Sleeved barrel helps to facilitate high
mechanical and electrical performance
when crimping in any orientation

*Recognized

Part Number
DR14-250-C*

Tab
Size
(In.)
.250 x .032

DR10-250-L

.250 x .032

Wire
Range
16 – 14
AWG
12 – 10
AWG

Std.
Pkg.
Tool
Qty.**
CT-100‡, CT-200‡, 100
CT-600‡,
CT-1570‡
CT-100‡, CT-200‡,
50
CT-600‡,
CT-1570‡,
CT-1701‡

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

Right Angle Female Disconnect
Non-Insulated
• Serrated barrel helps to facilitate high
mechanical and electrical performance
when crimping in any orientation

Part Number
DR14-250B-C

Tab
Size
(In.)
.250 x .032

Wire
Range
16 – 14
AWG

Tool
CT-100, CT-200

Std.
Pkg.
Qty.**
100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A36

Terminals

Male Disconnect, Nylon Barrel
Insulated – Funnel Entry
• Metal insulation grip sleeve crimps to wire
insulation providing protection to the crimp
joint during high vibration applications

Part Number
DNF18-250M-C

Tab
Size
(In.)
.250 x .032

DNF14-250M-C .250 x .032
DNF10-250M-L*

.250 x .032

Wire
Range
22 – 18
AWG
16 – 14
AWG
12 – 10
AWG

Color
Code
Red
Blue

Tool

Std.
Pkg.
Qty.**
100
100

CT-1550,
CT-1551

Yellow

50

*Not CSA Certified.
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.

Male Disconnect, Vinyl Barrel
Insulated – Funnel Entry
• Butted seam offers an economical solution
for less demanding applications

Part Number
DV18-250MB-CY
DV14-250MB-C

Tab Size
(In.)
.250 x
.032
.250 x
.032

Wire
Range
22 – 18
AWG
16 – 14
AWG

Color
Code
Red
Blue

Tool
CT-1550,
CT-1551

Std
Pkg.
Qty.**
100
100

**To order in bulk, replace -C or -CY in the part number with -M or -MY for
a bulk package of 1000.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A37

Terminals

Male Disconnect, Non-Insulated –
Butted Seam
• Butted seam offers an economical
solution for less demanding applications

Part Number
D14-250MB-C

Tab
Size
(In.)
.250 x .032

Wire
Range
16 – 14
AWG

Tool
CT-100

Std.
Pkg.
Qty.**
100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.

Male Blade Adapter, Vinyl Insulated –
Funnel Entry
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Flat blade design to prevent damage to
the wire from over tightening, resulting in a
reliable electrical connection
• Designed specifically for blade-type
terminal blocks
• Insulation support helps to prevent
wire damage in
bending applications
*Recognized

Part Number
DV18-145M-CY

Tab Size
(In.)
.145 x .032

DV14-145M-C

.145 x .032

Wire
Range
22 – 18
AWG
16 – 14
AWG

Color
Code
Red
Blue

Tool
CT-600,
CT-1550‡,
CT-1551‡

Std.
Pkg.
Qty.
100
100

**To order in bulk, replace -C or -CY in the part number with -M or -MY for
a bulk package of 1000.
‡UL and CSA approved tooling/product combinations.

◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A38

Non-Insulated Parallel Splices
Type PS

Terminals

Features and Benefits – PAN-TERM ® Splices

Seamless
tubular barrel
provides
consistent high
performance
quality crimps
Maximum
recommended
operating
temperature
150°C (302°F)

Only one crimp
needed to
complete splice

UL and CSA rated up to 300V.

Nylon Parallel Splices
Type PSN
Maximum insulation
temperature 105°C
(221°F)

Only one
crimp needed
to complete
splice

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A39

Terminals

Features and Benefits – PAN-TERM ® Splices
(continued)
Nylon Butt Splices
Type BSN
Maximum insulation
temperature 105°C
(221°F)

Internal wire
stops assure
proper insertion
length

Brazed seam
assures crimp
reliability

UL and CSA rated up to 600V.

Vinyl Butt Splices
Type BSV
Internal wire
stops assure
proper
insertion
length

Brazed seam
assures crimp
reliability

Maximum insulation
temperature 105°C
(221°F)

Expanded
wire entry
accommodates
larger insulation

UL and CSA rated up to 600V.
Flammability – UL94V-0.
Metric versions available.

Non-Insulated Butt Splices
Type BS
Internal wire stops
assure proper
insertion length

Brazed seam
assures crimp
reliability

Maximum recommended
operating temperature
150°C (302°F)
UL and CSA rated up to 600V.
Metric versions available.

A40

Internally beveled
barrel for quick easy
wire insertion

Terminals

PAN-TERM ® Splices
Butt Splice, Nylon Insulated
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Internal wire stop assures proper length of
insertion into terminal barrel

Part Number
BSN22-C*

Wire
Range
26 – 22 AWG

Color
Code
Yellow

BSN18-C

22 – 18 AWG

Red

BSN14-C

16 – 14 AWG

Blue

BSN10-L

12 – 10 AWG

Yellow

Tool
CT-100, CT-1525

Std.
Pkg.
Qty.**
100
100

CT-100, CT-600,
CT-1550, CT-1551

100
50

*Not UL Listed.
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.

Butt Splice, Vinyl Insulated
• Expanded funnel entry designed to
accommodate wire with a larger than
standard outside diameter insulation
• Insulation support helps to prevent wire
damage in bending applications
• Internal wire stop assures proper length of
insertion into terminal barrel

Color Code
Red

Tool

Std.
Pkg.
Qty.
100

16 – 14 AWG

Blue
Yellow

CT-100, CT-600,
CT-1550, CT-1551

100

12 – 10 AWG

Part Number
BSV18X-CY

Wire Range
22 – 18 AWG

BSV14X-C
BSV10X-L

50

**To order in bulk, replace -C or -CY in the part number with -M or -MY
for a bulk package of 1000 and replace -L with -D for a bulk package
of 500.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A41

Terminals

Butt Splice, Non-Insulated
• Brazed seam protects terminal barrel from
splitting during the crimp process
• Internal wire stop assures
proper length of insertion into
terminal barrel

Part Number
BS22-C*

Wire
Range
26 – 22 AWG

BS18-C

22 – 18 AWG

BS14-C

16 – 14 AWG

BS10-L

12 – 10 AWG

Std.
Pkg.
Qty.**
100

Tool
CT-100
CT-100, CT-200,
CT-600, CT-1570

100

CT-100, CT-200,
CT-600, CT-1570,
CT-1701‡

50

100

*Not UL Listed.
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.

Parallel Splice, Nylon Insulated
• Parallel design results in only one crimp
required to combine two wires

Part Number
PSN18-C

Wire
Range
22 – 18 AWG

Color
Code
Red

PSN16-C

20 – 16 AWG

Blue

Tool
CT-100,
CT-1525

Std.
Pkg.
Qty.**
100
100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.

Parallel Splice, Non-Insulated
• Parallel design results in only one crimp
required to combine two wires
• Non-insulated barrel can be used to provide
an economical termination
when insulation is not required

Part Number
PS16-C

Wire
Range
20 – 16 AWG

PS12-L

14 – 12 AWG

Tool

Std.
Pkg.
Qty.**
100

CT-100, CT-200

50

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
◆

For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.

Order number of pieces required, in multiples of Standard Package Quantity.

A42

Non-Insulated Wire Joints
Type J
Only one crimp
needed to
complete splice

Terminals

Features and Benefits – PAN-TERM ® Wire Joints

Maximum
recommended
operating
temperature
150°C (302°F)

Internally
beveled barrel
for quick easy
wire insertion

UL and CSA rated up to 600V.

Nylon Wire Joints
Type JN

Fully insulated
housing protects
crimp joint

Only one
crimp needed
to complete
splice

Maximum insulation
temperature 105°C
(221°F)

Deep skirt to
accommodate
multiple variations of
wire combinations

UL and CSA rated up to 600V
Metric versions available

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A43

Terminals

PAN-TERM ® Wire Joints
Wire Joint, Nylon Insulated
• Large barrel designed to accommodate
multiple combinations of wires (up to seven
wires) with just one crimp
• Fully pre-insulated housing designed to
protect crimp joint and reduce
the potential for shorting
and shocks

Part Number
JN224-318-C

CMA Range

Min/Max
Color
Wire Range Code
(2) #24 –
Red
(2) #16

Min.
808

Max.
5160
5160

Tool
CT-1550‡,
CT-1551‡

JN218-216-C

(2) #22 –
(2) #16

Clear

1284

JN418-212-C

(4) #18 –
(2) #12

Clear

6480 14750

CT-100‡,
CT-1550‡,
CT-1551‡

Std.
Pkg.
Qty.**
100
100
100

**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000, with exception of JN418-212-C, replace -C with -D
for bulk package of 500.
‡UL and CSA approved tooling/product combinations.

Wire Joint, Non-Insulated
• Large barrel designed to accommodate
multiple combinations of wires (up to seven
wires) with just one crimp
• Non-insulated barrel can be used to provide
an economical termination
when insulation is not required

CMA Range

Part Number
J214-312-T

Min/Max Wire
Range
(2) #14 – (3) #12

Min.
5760

Max.
19590

J318-412-T

(3) #18 – (4) #12

4860

27330

Tool
CT-100‡,
CT-200‡

Std.
Pkg.
Qty.**
200
200

**To order in bulk, replace -T in the part number with -2M for a bulk
package of 2000.
‡UL and CSA approved tooling/product combinations.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A44

PANDUIT Ferrules are available for wiring applications from
#26 AWG to #1 AWG. Offerings include insulated and non-insulated
ferrules, in single-wire or double-wire configurations. Insulated
ferrules are color coded to DIN standards.

Terminals

Features and Benefits – PAN-TERM ® Ferrules

Insulated Ferrules – Single Wire
Type FSF and FSD
Seamless tubular
barrel provides
consistent
quality crimps

Maximum insulation
temperature 89°C
(192°F)

Color coded
polypropylene identifies
wire range.
(DIN codes available)

Insulated Ferrules – Twin Wire
Type FTD
Oversized
seamless
tubular barrel
provides
consistent, high
performance
quality crimps
for two wire
applications

Maximum insulation
temperature 89°C
(192°F)
Color coded
polypropylene identifies
wire range. (German and
French codes available)

Non-Insulated Ferrules
Type F
Seamless tubular barrel
provides consistent
quality crimps

Maximum operating
temperature 89°C
(192°F)

Flared barrel
for quick easy wire insertion

For service and technical support, call 800-777-3300
or visit www.panduit.com.

A45

Terminals

PAN-TERM ® Ferrules
Insulated Ferrules – Single Wire DIN
End Sleeve
• Molded housing allows easy insertion
of wire
• Seamless barrel contains wire strands
preventing fraying or bending, resulting in
high quality, reliable connections

Pin
Wire Strip
Std.
Wire Size
Length
Length
Color
Pkg.
Part Number AWG mm²
In. mm
In.
mm
Tool
Code
Qty.
.24 6.0
3/8
9.5
500
FSD74-6-D
24
.34 Turquoise
CT-1002
.31 8.0 15/32 11.9
500
FSD74-8-D AWG
.24 6.0
3/8
9.5
500
FSD75-6-D
22
.31 8.0 15/32 11.9
500
FSD75-8-D
.50
White
AWG
.39 10.0 17/32 13.5
500
FSD75-10-D
.24 6.0
3/8
9.5
500
FSD76-6-D
20
.75
Gray
.31 8.0 15/32 11.9
500
FSD76-8-D AWG
.24 6.0
3/8
9.5
500
FSD77-6-D
.31 8.0 15/32 11.9
500
FSD77-8-D
18
1.00
Red
.39 10.0 17/32 13.5
500
FSD77-10-D AWG
.47 12.0 5/8 15.9
500
FSD77-12-D
.24 6.0
3/8
9.5 CT-1002, 500
FSD78-6-D
.31 8.0 15/32 11.9 CT-1003 500
FSD78-8-D
16
1.50
Black
.39 10.0 17/32 13.5
500
FSD78-10-D AWG
.47 12.0 5/8 15.9
500
FSD78-12-D
2.08 Yellow .31 8.0 15/32 11.9
500
FSD79-8-D
14
.31 8.0 15/32 11.9
500
FSD80-8-D
AWG 2.50
Blue
.47 12.0 5/8 15.9
500
FSD80-12-D
.39 10.0 17/32 13.5
500
FSD81-10-D 12
4.00
Gray
.47 12.0 5/8 15.9
100
FSD81-12-C AWG
100
FSD82-12-C 10 6.00 Yellow .47 12.0 5/8 15.9
AWG
10.0
Red
.47 12.0 5/8 15.9 CT-1003, 100
FSD83-12-C 8
AWG
CT-1004

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A46

• Oversized seamless tubular provides
consistent, high performance quality crimps
for two wire applications
• Molded housing allows easy insertion
of wire

Pin
Wire Size Color Length
Part Number
AWG mm² Code In. mm
22
.50 White .31 8.0
FTD75-8-D
AWG
.31 8.0
FTD76-8-D
20
.75 Gray
AWG
FTD76-10-D
.39 10.0
.31 8.0
FTD77-8-D
18
1.00 Red
.39 10.0
FTD77-10-D AWG
.31 8.0
FTD78-8-D
16
1.50 Black
.47 12.0
FTD78-12-D AWG
.39 10.0
FTD80-10-TL 14
2.50 Blue
.51 13.0
FTD80-13-TL AWG
12 4.00 Gray .47 12.0
FTD81-12-C
AWG
FTD82-14-C
10 6.00 Yellow .55 14.0
AWG

Wire Strip
Length
In.
mm
7/16 11.2
7/16
9/16
7/16
9/16
7/16
21/32
9/16
23/32
21/32

Tool

Terminals

Insulated Ferrules – Twin Wire DIN
End Sleeve

Std.
Pkg.
Qty.
500

11.2
500
14.0
500
11.2
500
14.0 CT-1002, 500
11.2 CT-1003 500
16.8
500
14.0
250
16.2
250
16.8
100

25/32 19.6 CT-1003, 100
CT-1004

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A47

Terminals

Ferrules, Non-Insulated
• Flared barrel allows easy insertion of wire
• Non-insulated barrel can be used to provide
an economical termination when insulation
is not required

Part
Number
F73-5-M
F73-7-M
F74-5-M
F75-6-M
F75-8-M
F75-10-M
F76-6-M
F76-8-M
F76-10-M
F77-6-M
F77-7-M
F77-8-M
F78-7-M
F78-8-M
F78-10-M
F80-7-M
F80-8-M
F80-10-M
F81-9-M
F81-10-M
F81-12-M
F82-10-M
F82-12-M
F82-15-M

Wire Size
In.
mm²
24
AWG

.25
.34

22
AWG

.50

20
AWG

.75

18
AWG

1.0

16
AWG

1.5

14
AWG

2.5

12
AWG

4.0

10
AWG

6.0

Length
In.
mm
.20
5.0
.28
7.0
.20
5.0
.24
6.0
.31
8.0
.39
10.0
.24
6.0
.31
8.0
.39
10.0
.24
6.0
.28
7.0
.31
8.0
.28
7.0
.31
8.0
.39
10.0
.28
7.0
.31
8.0
.39
10.0
.35
9.0
.39
10.0
.47
12.0
.39
10.0
.47
12.0
.59
15.0

Wire Strip
Length
In.
mm
7/32
5.0
9/32
7.0
7/32
5.0
1/4
6.0
5/16
8.0
13/32 10.0
1/4
6.0
5/16
8.0
13/32 10.0
1/4
6.0
9/32
7.0
5/16
8.0
9/32
7.0
5/16
8.0
13/32 10.0
9/32
7.0
5/16
8.0
13/32 10.0
11/32
8.0
13/32 10.0
15/32 12.0
13/32 10.0
15/32 12.0
19/32 15.0

Std.
Pkg.
Tool
Qty.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
CT-1002, 1000
CT-1003 1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A48

• Flared barrel allows easy insertion of wire
• Non-insulated barrel can be used to provide
an economical termination when insulation
is not required

Part
Number
F83-12-D
F83-15-D
F83-18-D
F84-12-TL
F84-15-TL
F84-18-TL
F85-12-C
F85-15-C
F85-18-C
F86-18-C
F86-20-C
F86-25-C
F87-18-C
F87-22-C
F87-25-C

Wire Size
In.
mm²
8
AWG

10.0

6
AWG

16.0

4
AWG

25.0

2
AWG

35.0

1
AWG

50.0

Length
In.
mm
.47
12.0
.59
15.0
.71
18.0
.47
12.0
.59
15.0
.71
18.0
.47
12.0
.59
15.0
.71
18.0
.71
18.0
.79
20.0
.98
25.0
.71
18.0
.87
22.0
.98
25.0

Wire Strip
Length
In.
mm
15/32 12.0
19/32 15.0
23/32 18.0
15/32 12.0
19/32 15.0
23/32 18.0
15/32 12.0
19/32 15.0
23/32 18.0
23/32 18.0
25/32 20.0
31/32 25.0
23/32 18.0
7/8
22.0
31/32 25.0

Tool
CT-1003,
CT-1004

CT-1004

CT-1005

CT-1006

Terminals

Ferrules, Non-Insulated (continued)

Std.
Pkg.
Qty.
500
500
500
250
250
250
100
100
100
100
100
100
100
100
100

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A49

Terminals

Terminal Kits
Plastic Box Terminal Kits
• Ideal for maintenance and
construction wiring
• Rugged plastic construction
• Kit has hanging tab for easy storage

Part Number
KP-1075

KP-1165

Part Description
Terminal kit without crimping tool. Includes the
following: (20) PV18-8R; PV18-6F; PV14-8F;
PV14-10R; (10) PV10-8R; PV10-10R;
DNF14-250; DNF-18-250; BSV18X; BSV14X;
BSV10X; (5) JN418-212.
Includes the following: (18) PV18-8R;
PV14-10R; P18-6F; P14-8F; (10) PV10-8R;
PV10-10R; BSV18X; BSV14X; BSV10X;
DV18-250B; DV14-188B; (5) JN418-212;
(1) CT-160 Tool; KP-1000 Box.

Std.
Pkg.
Qty.
1

1

Steel Kit Boxes
• Terminal kit in rugged steel case that can
be used stand-alone or fits into two, four or
six drawer slide racks

Part Number
K-1000

K-1102

K-1104

Part Description
Empty steel box, 20 terminal compartments and
1 tool compartment, measures
13 21/64" wide x 9 21/64" deep x 2" high
• Latch prevents accidental opening
• Handle for portability or as drawer pull when
used in rack
• Drop-in label area on front
Includes the following: (100) PV18-6LF;
PV18-8LF; PV14-8LF; PV14-10LF; BSV18X;
BSV14X; (50) PV10-10LF; BSV10X;
(1) CT-100 Tool; K-1000 Box.
Includes the following: (50) PN18-10R;
PN14-6R; PN14-10R; PN18-6F; PN14-6F;
PN14-10F; (25) PN10-10R; PN10-56R;
PN10-10F; BSN14; BSN10; JN418-212;
(1) CT-100 Tool; K-1000 Box.

Std.
Pkg.
Qty.
1

1

1

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A50

• Steel kits have individual compartments for
storage of terminals
• Convenient carrying handle
• Once top is closed, terminals remain in
their compartments

Part Number
K1-PNKIT

Part Description
Kit contains:
(1) K-1001 steel kit box
(1) CT-260 installation tool
Cable Ties
(100) PLT2S cable ties
Terminals
(100) PN14-610R multi-stud terminals
(100) PN18-610R multi-stud terminals
(100) PN18-6LF locking fork terminals
(100) PN14-8LF locking fork terminals
(50) PN10-10LF locking fork terminals
(100) PN18-8F fork terminals
(100) PN14-10R ring terminals
(50) PN10-10R ring terminals
Disconnects
(100) DNF18-250 disconnects
(100) DNF14-250 disconnects
(50) DV10-250 disconnects
Splices
(50) BSN18 butt splices
(50) BSN14 butt splices
(25) BSN10 butt splices
Marking System
(1) PMD-0-9 marking dispenser and tape
(100) MP150 marker tags
(1) PX-0 marker

Terminals

Industrial Maintenance Kits

Std.
Pkg.
Qty.
1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

A51

Terminals

Industrial Maintenance Kits (continued)
• Steel kits have individual compartments for
storage of terminals
• Convenient carrying handle
• Once top is closed, terminals remain in
their compartments

Part Number
K2-PVKIT

Part Description
Kit contains:
(1) K-1001 steel kit box
(1) CT-260 installation tool
Cable Ties
(100) PLT2S cable ties
Terminals
(100) PV18-8F fork terminals
(100) PV18-6LF locking fork terminals
(100) PV14-8LF locking fork terminals
(50) PV10-10LF locking fork terminals
(100) PV18-610R multi-stud terminals
(100) PV14-10R ring terminals
(50) PV10-10R ring terminals
Disconnects
(100) DV18-250B disconnects
(100) DV14-250B disconnects
(50) DV10-250 disconnects
Splices
(50) BSV18X butt splices
(50) BSV14X butt splices
(25) BSV10X butt splices
Wire Joints
(30) JN224-318
(15) JN314-412
Marking System
(1) PMD-0-9 marking dispenser and tape

Std.
Pkg.
Qty.
1

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

A52

Crimping Guidelines for PANDUIT ® PAN-LUG ™
Compression Lugs and Splices
1. Select the proper PANDUIT compression connector for the
conductor type and size being used.
• PANDUIT compression connectors are identified with
the proper conductor size and conductor type marked
on the tongue or barrel of the connector

Power Connectors

• The proper conductor
size and type to be used
with each connector can
also be found in the
installation instructions
included with PANDUIT
product packaging and
in the tool charts*
2. Strip the conductor to the proper strip length.
As specified:
• On the PANDUIT product packaging label or
• On the installation instructions
included with PANDUIT
product packaging or
• In the tool charts*
Make sure the conductor is not stripped too long, which
would result in exposed wire between the barrel of the
connector and the cable insulation.
Make sure the conductor is not stripped too short,
which would result in a less than complete contact area
with the connector when the conductor is inserted in
the barrel.
Do not nick or cut strands of conductor during
crimping, which would result in a less than premium
conductor termination.
Make sure conductor strands are free
from corrosion.
*See condensed tool charts on pages B4-B27; for complete tool charts
refer to pages D2.148-D2.186 of the Electrical Solutions Catalog,
SA-ELCB03, at www.panduit.com.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B1

Crimping Guidelines for PANDUIT ® PAN-LUG ™
Compression Lugs and Splices (continued)
3. Select the proper crimping die and crimping tool to be used
with the connector.

Power Connectors

Use crimping tools and dies that provide a UL Listed and/or
CSA Certified electrical termination, to assure a safe and
reliable connection.
Many PANDUIT compression connectors are UL Listed and
CSA Certified when crimped with PANDUIT and specified
competitor crimping tools and dies. These tools and dies are
listed in the tool charts*. PANDUIT crimping tools and dies to
be used with each connector are also listed on the installation
instructions included with PANDUIT product packaging.

PANDUIT compression connectors are color
coded and marked with PANDUIT and specified
competitor die index numbers. Select the proper
crimping die to be used by matching the color code
and die index number marked on the connector to
the same markings on the crimping die.

*See condensed tool charts on pages B4-B27; for complete tool charts
refer to pages D2.148-D2.186 of the Electrical Solutions Catalog,
SA-ELCB03, at www.panduit.com.

B2

Crimping Guidelines for PANDUIT ® PAN-LUG ™
Compression Lugs and Splices (continued)
4. Crimp the connector.

Review the installation instructions
included with the PANDUIT product
packaging or the tool charts* for the
proper number of crimps to be placed
in the connector. Make the first crimp in
the barrel nearest the tongue of the lug,
or wire stop in a butt splice, and make
Identify
successive crimps in the barrel working
towards the conductor entry at the
end of the barrel. Use the color coded
or knurled band markings on the
barrel of the connector to evenly
space the placement of the crimps in
the barrel.

Power Connectors

Insert the conductor into the barrel of the connector. The
conductor should stop against the end of the barrel of the
lug, or wire stop in the butt splice, upon
complete insertion of the conductor
in the barrel. Some lugs are offered
with inspection windows that provide
visual inspection of the complete
conductor insertion.

When properly crimped, the die index number engraved in the
crimping die will be embossed into the barrel of the connector.
The crimp should be placed in the connector so the die index
number can be easily read when the connector is installed.

Die index number must be visible

*See condensed tool charts on pages B4-B27; for complete tool charts
refer to pages D2.148-D2.186 of the Electrical Solutions Catalog,
SA-ELCB03, at www.panduit.com.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B3

Power Connectors

PANDUIT Installation Tooling and Die Selection

PANDUIT
Connector
Type
LCA10
LCB10
LCD10
LCC10
LCAS8
LCA8
LCAN8
LCB8
LCBN8
LCD8
LCDN8
LCC8
LCCN8
SCSS8
SCS8
SCL8
LCAS6
LCA6
LCAN6
LCB6
LCBN6
LCD6
LCDN6
LCC6
LCCN6
SCSS6
SCS6
SCL6
LCAS4
SCSS4
LCA4
LCAN4
LCB4
LCBN4
LCD4
LCDN4
LCC4
LCCN4
SCS4
SCL4

Std.
Wire
Size

CT-1570 CT-1701➀ CT-1700➀

#14 – #10
AWG STR,
#12 – #10
AWG SOL

12 – 10

P10

—

—

#8 AWG

—

—

Red P21

CD-720-1
Red P21

#6 AWG

—

—

Blue P24

CD-720-1
Blue P24

—

—

Gray P29

CD-720-1
Gray P29

#4 AWG
STR

#4 – #3
AWG STR,
#2 AWG
SOL

Note: See page B27 for note references.

B4

CT-720

Die Part Number / Color Code & Die
Index Number

PANDUIT Installation Tooling and Die Selection
(continued)
CT-920,11 CT-920CH,11
CT-930, CT-930CH,
CT-2930, CT-930LPCH,➅
CT-2931, CT-2940,➂
CT-2920,11 CT940CH➂

UNI-DIE ™
CT-980, CT-2980, CT980CH,
CT-2981, CT980LPCH,➅
CT-2950➄
Extended Wire Range➉

CT-2001,
CT-2002

Die Part Number / Color Code & Die
Index Number

—

—

CD-920-8
Red P21

—

CD-2001-8
Red P21

CD-920-6
Blue P24

—

CD-2001-6
Blue P24

CD-920-4
Gray P29

#4 AWG STR

CD-2001-4
Gray P29

Power Connectors

—

Note: See page B27 for note references.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B5

Power Connectors

PANDUIT Installation Tooling and Die Selection
(continued)

PANDUIT
Connector
Type
LCAS2
LCA2
LCAN2➈
LCB2
LCBN2
LCD2
LCDN2
LCC2
LCCN2
SCSS2
SCS2
SCL2
LCAS1
LCA1
LCAN1
LCB1
LCBN1
LCD1
LCDN1
LCC1
LCCN1
SCSS1
SCS1
SCL1
LCAS1/0
LCA1/0
LCAN1/0
LCB1/0
LCBN1/0
LCD1/0
LCDN1/0
LCC1/0
LCCN1/0
SCSS1/0
SCS1/0
SCL1/0

Std.
Wire
Size

CT-1570 CT-1701➀ CT-1700 ➀

#2 AWG

—

—

Brown P33

CD-720-1
Brown P33

#1 AWG

—

—

Green P37

CD-720-2
Green P37

1/0 AWG

—

—

—

CD-720-2
Pink P42

Note: See page B27 for note references.

B6

CT-720

Die Part Number / Color Code & Die
Index Number

PANDUIT Installation Tooling and Die Selection
(continued)
CT-920,11 CT-920CH, 11
CT-930, CT-930CH,
CT-2930, CT-930LPCH➅,
CT-2931, CT-2940,➂
CT-2920,11 CT940CH➂

UNI-DIE ™
CT-980, CT-2980, CT-980CH,
CT-2981, C-T980LPCH,➅
CT-2950➄
Extended Wire Range➉

CT-2001,
CT-2002

Die Part Number / Color Code & Die
Index Number

#6 – #2 AWG

CD-2001-2
Brown P33

CD-920-1
Green P37

#6 – #1 AWG

CD-2001-1
Green P37

CD-920-1/0
Pink P42

#6 – 1/0 AWG

CD-2001-1/0
Pink P42

Power Connectors

CD-920-2
Brown P33

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B7

Power Connectors

PANDUIT Installation Tooling and Die Selection
(continued)

B8

PANDUIT
Connector
Type
LCAS2/0
LCA2/0
LCAN2/0
LCB2/0
LCBN2/0
LCD2/0
LCDN2/0
LCC2/0
LCCN2/0
SCSS2/0
SCS2/0
SCL2/0
LCAS3/0
LCA3/0
LCAN3/0
LCB3/0
LCBN3/0
LCD3/0
LCDN3/0
LCC3/0
LCCN3/0
SCSS3/0
SCS3/0
SCL3/0
LCAS4/0
LCA4/0
LCAN4/0
LCB4/0
LCBN4/0
LCD4/0
LCDN4/0
LCC4/0
LCCN4/0
SCSS4/0
SCS4/0
SCL4/0

Std.
Wire
Size

CT-1570

CT-1701

CT-1700

CT-720

Die Part Number / Color Code & Die
Index Number

2/0 AWG

—

—

—

CD-720-2
Black P45

3/0 AWG

—

—

—

CD-720-2
Orange
P50

4/0 AWG

—

—

—

CD-720-3
Purple
P54

PANDUIT Installation Tooling and Die Selection
(continued)
CT-920,11 CT-920CH,11
CT-930, CT-930CH,
CT-2930, CT-930LPCH,➅
CT-2931, CT-2940,➂
CT-2920,11 CT940CH➂

UNI-DIE ™
CT-980, CT-2980, CT-980CH,
CT-2981, CT-980LPCH,➅
CT-2950➄
Extended Wire Range➉

CT-2001,
CT-2002

Die Part Number / Color Code & Die
Index Number

#4 – 2/0 AWG

CD-2001-2/0
Black P45

CD-920-3/0
Orange P50

#2 – 3/0 AWG

CD-2001-3/0
Orange P50

CD-920-4/0
Purple P54

#1 – 4/0 AWG

CD-2001-4/0
Purple P54

Power Connectors

CD-920-2/0
Black P45

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B9

Power Connectors

PANDUIT Installation Tooling and Die Selection
(continued)

PANDUIT
Connector
Type
LCAS250
LCA250
LCAN250
LCB250
LCBN250
LCD250
LCDN250
LCC250
LCCN250
SCSS250
SCS250
SCL250
LCA300
LCAN300
LCB300
LCBN300
LCD300
LCDN300
LCC300
LCCN300
SCS300
SCL300
LCA350
LCAN350
LCB350
LCBN350
LCD350
LCDN350
LCC350
LCCN350
SCS350
SCL350

B10

Std.
Wire
Size

CT-1570

CT-1701

CT-1700

CT-720

Die Part Number / Color Code & Die
Index Number

250 kcmil

—

—

—

CD-720-3
Yellow P62

300 kcmil

—

—

—

CD-720-4
White P66

350 kcmil

—

—

—

CD-720-5
Red P71

PANDUIT Installation Tooling and Die Selection
(continued)
CT-920,11 CT-920CH,11
CT-930, CT-930CH,
CT-2930, CT-930LPCH,➅
CT-2931, CT-2940,➂
CT-2920,11 CT940CH➂

UNI-DIE ™
CT-980, CT-2980, CT-980CH,
CT-2981, CT-980LPCH,➅
CT-2950➄
Extended Wire Range➉

CT-2001,
CT-2002

Die Part Number / Color Code & Die
Index Number

1/0 AWG – 250 kcmil

CD-2001-250
Yellow P62

CD-920-300
White P66

2/0 AWG – 300 kcmil

CD-2001-300
White P66

CD-920-350
Red P71

3/0 AWG – 350 kcmil

CD-2001-350
Red P71

Power Connectors

CD-920-250
Yellow P62

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B11

Power Connectors

PANDUIT Installation Tooling and Die Selection
(continued)

PANDUIT
Connector
Type
LCA400
LCAN400
LCB400
LCBN400
LCD400
LCDN400
LCC400
LCCN400
SCS400
SCL400
LCA500
LCAN500
LCB500
LCBN500
LCD500
LCDN500
LCC500
LCCN500
SCS500
SCL500
LCA600
LCAN600
LCB600
LCBN600
LCD600
LCDN600
LCC600
LCCN600
SCS600
SCL600

B12

Std.
Wire
Size

CT-1570

CT-1701

CT-1700

CT-720

Die Part Number / Color Code & Die
Index Number

400 kcmil

—

—

—

CD-720-6
Blue P76

500 kcmil

—

—

—

CD-720-7
Brown P87

600 kcmil

—

—

—

—

PANDUIT Installation Tooling and Die Selection
(continued)
CT-920,11 CT-920CH,11
CT-930, CT-930CH,
CT-2930, CT-930LPCH,➅
CT-2931, CT-2940,➂
CT-2920,11 CT940CH➂

UNI-DIE ™
CT-980, CT-2980, CT-980CH,
CT-2981, CT-980LPCH,➅
CT-2950➄
Extended Wire Range➉

CT-2001,
CT-2002

Die Part Number / Color Code & Die
Index Number

4/0 AWG – 400 kcmil

CD-2001-400
Blue P76

CD-920-500
Brown P87

4/0 AWG – 500 kcmil

CD-2001-500
Brown P87

CD-920-600
Green P94

250 – 600 kcmil

—

Power Connectors

CD-920-400
Blue P76

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B13

Power Connectors

PANDUIT Installation Tooling and Die Selection
(continued)

PANDUIT
Connector
Type
LCA750
LCAN750
LCB750
LCBN750
LCD750
LCDN750
LCC750
LCCN750
SCS750
SCL750
LCB800
LCBN800
LCC800
LCCN800
LCB1000
LCBN1000
LCD1000
LCC1000
LCCN1000
SCS1000
SCL1000

B14

Std.
Wire
Size

CT-1570

CT-1701

CT-1700

CT-720

Die Part Number / Color Code & Die
Index Number

750 kcmil

—

—

—

—

800 kcmil

—

—

—

—

1000 kcmil

—

—

—

—

PANDUIT Installation Tooling and Die Selection
(continued)
CT-920,11 CT-920CH,11
CT-930, CT-930CH,
CT-2930, CT-930LPCH,➅
CT-2931, CT-2940,➂
CT-2920,11 CT940CH➂

UNI-DIE ™
CT-980, CT-2980, CT-980CH,
CT-2981, CT-980LPCH,➅
CT-2950➄
Extended Wire Range➈

CT-2001,
CT-2002

Die Part Number / Color Code & Die
Index Number

500 – 750 kcmil

—

CD-940-800➃
Orange P107

—

—

CD-940-1000➃
White P125

—

—

Power Connectors

CD-920-750
CD-940-750➃
Black P106

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B15

Installation Tooling and Die Selection
Cross Reference

Power Connectors

Thomas & Betts

PANDUIT
Connector
Type
LCAS8
LCA8
LCAN8
LCB8
LCBN8
LCD8
LCDN8
LCC8
LCCN8
SCSS8
SCS8
SCL8
LCAS6
LCA6
LCAN6
LCB6
LCBN6
LCD6
LCDN6
LCC6
LCCN6
SCSS6
SCS6
SCL6
LCAS4
SCSS4
LCA4
LCAN4
LCB4
LCBN4
LCD4
LCDN4
LCC4
LCCN4
SCS4
SCL4

B16

Std.
Wire
Size

TBM20S,
TBM25S TBM5

TBM8

TBM15,
TBM12,
TBM15I,
13642M TBM15BSCR

Die Part Number / Color Code & Die
Index Number

#8 AWG

Red
21

Red
21

Red
21

Red
21

Red
21

#6 AWG

Blue
24

Blue
24

Blue
24

Blue
24

Blue
24

Gray
29

Gray
29

Gray
29

Gray
29

Gray
29

#4 AWG
STR

#4 – #3
AWG
STR,
#2 AWG
SOL

Installation Tooling and Die Selection
Cross Reference (continued)
Thomas & Betts

Die Part Number / Color Code & Die
Index Number

STD

Red
21

Red
49

#8

U8CRT
Red
49

U8CRT
Red
49

—

STD

Blue
24

Blue
7

#6

U5CRT
Blue
7

U5CRT
Blue
7

STD

STD

Gray
29

Gray
8

#4

U4CRT
Gray
8

U4CRT
Gray
8

STD

Power Connectors

Burndy
Y35,
Y35BH,
Y39,
Y39BH,
Y750,
Y750-2,
Y750BH,
Y644M,
Y750BH-2,
TBM8-750M-1,
TBM14M,
Y644HS,
Y750HS,
TBM8-750,
TBM14BSCR, Y2MR,
Y644MBH,
PAT750,
TBM8-750BSCR, BPLT14BSCR, Y1MRTC,
BAT750, Y45,➆ PAT644,
➇
➆
Y46
Y1MR MY29 BAT35
TMB750BSCR
13100A
BAT644

Note: See page B27 for note references.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B17

Installation Tooling and Die Selection
Cross Reference (continued)

Power Connectors

Thomas & Betts

PANDUIT
Connector
Type
LCAS2

Std.
Wire
Size

TBM20S,
TBM25S TBM5

TBM8

TBM15,
TBM12,
TBM15I,
13642M TBM15BSCR

Die Part Number / Color Code & Die
Index Number

SCSS2
LCA2
LCAN2➁
LCB2
LCBN2
LCD2
LCDN2
LCC2
LCCN2
SCS2
SCL2
LCAS1
LCA1
LCAN1
LCB1
LCBN1
LCD1
LCDN1
LCC1
LCCN1
SCSS1
SCS1
SCL1
LCAS1/0
LCA1/0
LCAN1/0
LCB1/0
LCBN1/0
LCD1/0
LCDN1/0
LCC1/0
LCCN1/0
SCSS1/0
SCS1/0
SCL1/0

#2 AWG

Brown
33

Brown
33

Brown
33

Brown
33

Brown
33

#1 AWG

—

Green
37

Green
37

Green
37

Green
37

1/0
AWG

—

Pink
42

Pink
42

Pink
42

Pink
42H➁

Note: See page B27 for note references.

B18

Installation Tooling and Die Selection
Cross Reference (continued)
Thomas & Betts

Die Part Number / Color Code & Die
Index Number
U2CRT
Brown
10

U2CRT
Brown
10

U2CRT
Brown
9
(SOL)/
Brown
10
(STR)

U2CRT
Brown
9
(SOL)/
Brown
10
(STR)

STD

Brown
33

Brown
10

#2

STD

Green
37

—

#1

U1CRT
Green
11

U1CRT
Green
11

STD

STD

Pink
42H➁

—

1/0

U25RT
Pink
12

U25RT
Pink
12

STD

Power Connectors

Burndy
Y35,
Y35BH,
Y39,
Y39BH,
Y750,
Y750-2,
Y750BH,
Y644M,
Y750BH-2,
TBM8-750M-1,
TBM14M,
Y644HS,
Y750HS,
TBM8-750,
TBM14BSCR, Y2MR,
Y644MBH,
PAT750,
TBM8-750BSCR, BPLT14BSCR, Y1MRTC,
BAT750, Y45,➆ PAT644,
➇
➆
Y46
Y1MR MY29 BAT35
TMB750BSCR
13100A
BAT644

STD

Note: See page B27 for note references.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B19

Installation Tooling and Die Selection
Cross Reference (continued)

Power Connectors

Thomas & Betts

PANDUIT
Connector
Type
LCAS2/0
LCA2/0
LCAN2/0
LCB2/0
LCBN2/0
LCD2/0
LCDN2/0
LCC2/0
LCCN2/0
SCSS2/0
SCS2/0
SCL2/0
LCAS3/0
LCA3/0
LCAN3/0
LCB3/0
LCBN3/0
LCD3/0
LCDN3/0
LCC3/0
LCCN3/0
SCSS3/0
SCS3/0
SCL3/0
LCAS4/0
LCA4/0
LCAN4/0
LCB4/0
LCBN4/0
LCD4/0
LCDN4/0
LCC4/0
LCCN4/0
SCSS4/0
SCS4/0
SCL4/0

Std.
Wire
Size

TBM20S,
TBM25S TBM5

Die Part Number / Color Code & Die
Index Number

2/0
AWG

—

3/0
AWG

—

Orange Orange Orange
50
50
50

Orange
50

4/0
AWG

—

Purple
54

Purple
54H➁

Black
45

Note: See page B27 for note references.

B20

TBM8

TBM15,
TBM12,
TBM15I,
13642M TBM15BSCR

Black
45

Purple
54

Black
45

Purple
54

Black
45

Installation Tooling and Die Selection
Cross Reference (continued)
Thomas & Betts

Die Part Number / Color Code & Die
Index Number

STD

Black
45

—

2/0

U26RT
Black
13

U26RT
Black
13

STD

STD

Orange
50

—

3/0

U27RT
Orange
14

U27RT
Orange
14

STD

STD

Purple
54H➁

—

4/0

U28RT
Purple
15

U28RT
Purple
15

STD

Power Connectors

Burndy
Y35,
Y35BH,
Y39,
Y39BH,
Y750,
Y750-2,
Y750BH,
Y644M,
Y750BH-2,
TBM8-750M-1,
TBM14M,
Y644HS,
Y750HS,
TBM8-750,
TBM14BSCR, Y2MR,
Y644MBH,
PAT750,
TBM8-750BSCR, BPLT14BSCR, Y1MRTC,
BAT750, Y45,➆ PAT644,
➇
➆
Y46
Y1MR MY29 BAT35
TMB750BSCR
13100A
BAT644

Note: See page B27 for note references.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B21

Installation Tooling and Die Selection
Cross Reference (continued)

Power Connectors

Thomas & Betts

PANDUIT
Connector
Type
LCAS250
LCA250
LCAN250
LCB250
LCBN250
LCD250
LCDN250
LCC250
LCCN250
SCSS250
SCS250
SCL250
LCA300
LCAN300
LCB300
LCBN300
LCD300
LCDN300
LCC300
LCCN300
SCS300
SCL300
LCA350
LCAN350
LCB350
LCBN350
LCD350
LCDN350
LCC350
LCCN350
SCS350
SCL350

Std.
Wire
Size

TBM20S,
TBM25S TBM5

Die Part Number / Color Code & Die
Index Number

250
kcmil

—

Yellow
62

Yellow
62

Yellow
62

Yellow
62

300
kcmil

—

—

White
66

White
66H➁

White
66

350
kcmil

—

—

Red
71

Red
71H➁

Red
71H➁

Note: See page B27 for note references.

B22

TBM8

TBM15,
TBM12,
TBM15I,
13642M TBM15BSCR

Installation Tooling and Die Selection
Cross Reference (continued)
Thomas & Betts

Die Part Number / Color Code & Die
Index Number

STD

Yellow
62

—

250

U29RT
Yellow
16

U29RT
Yellow
16

STD

STD

White
66

—

—

U30RT
White
17

U30RT
White
17

STD

STD

Red
71H➁

—

—

U31RT
Red
18

U31RT
Red
18

STD

Power Connectors

Burndy
Y35,
Y35BH,
Y39,
Y39BH,
Y750,
Y750-2,
Y750BH,
Y644M,
Y750BH-2,
TBM8-750M-1,
TBM14M,
Y644HS,
Y750HS,
TBM8-750,
TBM14BSCR, Y2MR,
Y644MBH,
PAT750,
TBM8-750BSCR, BPLT14BSCR, Y1MRTC,
BAT750, Y45,➆ PAT644,
➇
➆
Y46
Y1MR MY29 BAT35
TMB750BSCR
13100A
BAT644

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B23

Installation Tooling and Die Selection
Cross Reference (continued)

Power Connectors

Thomas & Betts

PANDUIT
Connector
Type
LCA400
LCAN400
LCB400
LCBN400
LCD400
LCDN400
LCC400
LCCN400
SCS400
SCL400
LCA500
LCAN500
LCB500
LCBN500
LCD500
LCDN500
LCC500
LCCN500
SCS500
SCL500
LCA600
LCAN600
LCB600
LCBN600
LCD600
LCDN600
LCC600
LCCN600
SCS600
SCL600

Std.
Wire
Size

TBM20S,
TBM25S TBM5

Die Part Number / Color Code & Die
Index Number

400
kcmil

—

—

Blue
76

Blue
76H➁

Blue
76H➁

500
kcmil

—

—

Brown
87

Brown
87H➁

Brown
87H➁

600
kcmil

—

—

—

Green
94H➁

Green
94H➁

Note: See page B27 for note references.

B24

TBM8

TBM15,
TBM12,
TBM15I,
13642M TBM15BSCR

Installation Tooling and Die Selection
Cross Reference (continued)
Thomas & Betts

Die Part Number / Color Code & Die
Index Number

STD

Blue 76

—

—

U32RT
Blue
19

U32RT
Blue
19

STD

STD

Brown
87H➁

—

—

U34RT
Brown
20

U34RT
Brown
20

STD

STD

Green
94H➁

—

—

U36RT
Green
22

U36RT
Green
22

STD

Power Connectors

Burndy
Y35,
Y35BH,
Y39,
Y39BH,
Y750,
Y750-2,
Y750BH,
Y644M,
Y750BH-2,
TBM8-750M-1,
TBM14M,
Y644HS,
Y750HS,
TBM8-750,
TBM14BSCR, Y2MR,
Y644MBH,
PAT750,
TBM8-750BSCR, BPLT14BSCR, Y1MRTC,
BAT750, Y45,➆ PAT644,
➇
➆
Y46
Y1MR MY29 BAT35
TMB750BSCR
13100A
BAT644

Note: See page B27 for note references.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B25

Installation Tooling and Die Selection
Cross Reference (continued)

Power Connectors

Thomas & Betts

TBM20S,
TBM25S TBM5

TBM15,
TBM12,
TBM15I,
13642M TBM15BSCR

TBM8
PANDUIT
Std.
Connector
Die Part Number / Color Code & Die
Wire
Type
Index Number
Size
LCA750
LCAN750
LCB750
LCBN750
LCD750
Black
750
Black
—
—
—
106H➁
kcmil
106H➁
LCDN750
LCC750
LCCN750
SCS750
SCL750
LCB1000
LCBN1000
LCD1000
1000
Yellow
Yellow
LCC1000
—
—
—
kcmil
125H➁
125H➁
LCCN1000
SCS1000
SCL1000
Note: See page B27 for note references.

B26

Installation Tooling and Die Selection
Cross Reference (continued)
Thomas & Betts

Die Part Number / Color Code & Die
Index Number

STD

Black
106H➁

—

—

U39RT
Black
24

U39RT
Black
24

STD

—

125H➁

—

—

—

S44RT
White
27

—

Power Connectors

Burndy
Y35,
Y35BH,
Y39,
Y39BH,
Y750,
Y750-2,
Y750BH,
Y644M,
Y750BH-2,
TBM8-750M-1,
TBM14M,
Y644HS,
Y750HS,
TBM8-750,
TBM14BSCR, Y2MR,
Y644MBH,
PAT750,
TBM8-750BSCR, BPLT14BSCR, Y1MRTC,
BAT750, Y45,➆ PAT644,
➇
➆
Y46
Y1MR MY29 BAT35
TMB750BSCR
13100A
BAT644

➀ The CT-1700 and CT-1701 crimp die pockets are integrated into the tool frame.
➁ Half width dies.
➂ CD-920 dies can be used with CT-940CH and CT-2940 tools with

CD-940-DA adapter.

➃ CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
➄ Maximum size: 500 kcmil lugs and 250 kcmil splices.
➅ Maximum size: 250 kcmil lugs and splices.
➆ Requires U die adapter.
➇ Minimum size: #4 AWG lugs and splices.
➈ LCAN2 lugs for use with #2 AWG and #3 AWG wire.
➉ Extended wire range when crimped with these PANDUIT ® UNI-DIE ™ Dieless
11

Crimping Tools, except LCAS parts.
Maximum splice size for CT-920, CT920CH and CT-2920 tools is 400 kcmil.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B27

Compression Connector Crimping Tools

Power Connectors

Manual & Battery Powered Die Type
Crimping Tools

CT-1700

CT-720

CT-930

CT-2001

CT-2931

CT-2940
Std.
Pkg.
Qty.
1

Part Number
CT-1700

Description
Ergonomic, Hand Tool; Includes 5 position
color coded rotating die; Installs #8 - #1 AWG
PAN-LUG ™ Compression Connectors.

CT-720

Die Type, Manual, Crimping Tool; Installs
#8 AWG - 500 kcmil PAN-LUG ™
Compression Connectors.

1

CT-930

Die Type, Manual Hydraulic, 14 Ton, Crimping
Tool; Includes tool case with die storage;
Installs #14 AWG - 750 kcmil PAN-LUG ™
Compression Connectors.

1

CT-2001

Die Type, Battery Powered Hydraulic, 6 Ton,
Crimping Tool; Includes two batteries, charger,
shoulder strap, tool case; Installs #14 AWG 500 kcmil PAN-LUG ™ Compression Connectors.

1

CT-2931

Die Type, Battery Powered Hydraulic, 12 Ton,
Crimping Tool; Includes two batteries, charger,
tool case; Installs #14 AWG - 750 kcmil
PAN-LUG ™ Compression Connectors.

1

CT-2940

Die Type, Battery Powered Hydraulic, 15 Ton,
Crimping Tool; Includes two batteries,
charger, shoulder strap, tool case; Installs
#14 AWG - 1,000 kcmil PAN-LUG ™
Compression Connectors.

1

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B28

Die Type, High Pressure Remote Hydraulic,
Crimp Heads & Hydraulic Pump

CT-940CH

CT-901HP

CT-900HPH

CT-901RCH

CT-901RFS
Std.
Pkg.
Qty.
1

Part Number
CT-930CH

Description
Die Type, Remote Hydraulic, 14 Ton, Crimp
Head; Used with 10,000 PSI hydraulic systems;
Includes tool case and female Parker type
quick-connect fitting assembled to tool;
Installs #14 AWG - 750 kcmil PAN-LUG ™
Compression Connectors.

CT-940CH

Die Type, Remote Hydraulic, 15 Ton, Crimp
Head; Used with 10,000 PSI hydraulic systems;
Includes tool case and female Parker type
quick-connect fitting assembled to tool;
Installs #10 AWG - 1000 kcmil PAN-LUG ™
Compression Connectors.

1

CT-901HP

Hydraulic Pump; Develops 10,000 PSI output;
Includes on/off pendant switch on 10' electric
cord, 3 prong A/C plug on 10' electric cord, female
Parker type quick-connect fitting assembled to
pump; Compatible with CT-900HPH hydraulic
hose, CT-930CH, CT-940CH and CT-980CH
crimp heads sold separately.
Electrically Non-Conductive 10' Hose; Includes
two male Parker type quick-connect fittings;
Compatible with CT-901HP hydraulic pump and
CT-930CH, CT-940CH and CT-980CH crimp
heads, sold separately.

1

Remote Control Handle; Incorporates plastic
carrying handle with on/off activation switch for
one hand operation; Used with remote hydraulic
crimp heads CT-930CH, CT-940CH and
CT-980CH; Includes 10' three wire control
cable that can be directly connected to the
CT-901HP pump.
Dual Electrical Foot Switch; Allows “hands-free”
operation of CT-901HP or CT-8250HP electric
hydraulic pumps used with PANDUIT remote
hydraulic crimp heads; Includes 10' electric cord.

1

CT-900HPH

CT-901RCH

CT-901RFS

Power Connectors

CT-930CH

1

1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B29

Power Connectors

Die Type, Low Pressure Remote
Hydraulic, Crimp Head & Hydraulic Pump

CT-930LPCH

CT-8250HP

CT-900LPHPH

CT-901RFS
Std.
Pkg.
Qty.
1

Part Number
CT-930LPCH

Description
Die Type, Remote Hydraulic, 10.5 Ton,
Crimp Head; Includes tool case and male
Parker type quick-connect fitting assembled to
tool; Installs #8 AWG – 250 kcmil PAN-LUG ™
Compression Connectors.

CT-8250HP

Hydraulic Pump; Develops 7,500 PSI output;
Includes on/off pendant switch on 10' electric
cord, 3 prong A/C plug on 10' electric cord, male
Parker type quick-connect fitting assembled to
pump; Compatible with CT-900LPHPH hydraulic
hose, CT-930LPCH and CT-980LPCH crimp
heads sold separately.
Electrically Non-Conductive 10' Hose; Includes
two female Parker type quick-connect fittings;
Compatible with CT-901LPHPH hydraulic pump
and CT-930LPCH and CT-980LPCH
crimp heads.

1

Dual Electrical Foot Switch; Allows “hands-free”
operation of CT-901HP or CT-8250HP electric
hydraulic pumps used with PANDUIT remote
hydraulic crimp heads; Includes 10' electric cord.

1

CT-900LPHPH

CT-901RFS

1

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B30

Die Type, Manual, Crimping Tool and
Die Kits
• Available with or without controlled
cycle feature to meet
specific applications
• Kits available with three or full set of
seven dies for crimping partial or full
range of connector sizes

Part Number
CT-720-7

Part Description
Tool kit for installing #8 AWG – 500 kcmil
PAN-LUG ™ Compression Connectors; Includes
seven dies (CD-720-1 through CD-720-7) and
carrying/storage case (C-720).

CT-720-7CC

Controlled cycle tool kit for installing #8 AWG –
500 kcmil PAN-LUG ™ Compression Connectors;
Includes seven dies (CD-720-1 through
CD-720-7) and carrying/storage case (C-720).

1

CT-720-3

Tool kit for installing #8 AWG – 250 kcmil
PAN-LUG ™ Compression Connectors; Includes
three dies (CD-720-1 through CD-720-3) and
carrying/storage case (C-720).

1

CT-720-3CC

Controlled cycle tool kit for installing #8 AWG –
250 kcmil PAN-LUG ™ Compression Connectors;
I2ncludes three dies (CD-720-1 through
CD-720-3) and carrying/storage case (C-720).

1

CC-720

Optional controlled cycle mechanism only. Total
weight of tool with CC-720 is 8.25 lbs.

1

C-720

Steel carrying case for CT-720 crimping tool.

1

Power Connectors

Std.
Pkg.
Qty.
1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B31

CD-720 Crimping Dies
Compression dies for crimping tool:
CT-720

Used to Install PANDUIT Compression
Lug & Splice Sizes

Power Connectors

Part Number
CD-720-1

Copper
Conductor
Size
#8 – #2
AWG

Copper
Aluminum Aluminum
Die Color Conductor Die Color
& Die No.
Size
& Die No.
Red P21,
#6 AWG
Gray P29
Blue P24,
Gray P29,
Brown P33

Std.
Pkg.
Qty.
1

CD-720-2

#1 – 3/0
AWG

Green P37,
Pink P42,
Black P45,
Orange P50

#4 – 1/0
AWG

Green P37,
Pink P42,
Gold P45,
Tan P50

1

CD-720-3

4/0 AWG –
250 kcmil

Purple P54,
Yellow P62

2/0 – 3/0
AWG

Olive P54,
Ruby P62

1

CD-720-4

300 kcmil

White P66

4/0 AWG

White P66

1

CD-720-5

350 kcmil

Red P71

250 kcmil

Red P71

1

CD-720-6

400 kcmil

Blue P76

300 kcmil

Blue P76

1

CD-720-7

500 kcmil

Brown P87

350 kcmil

Brown P87

1

#8 – #2
AWG, vinyl
insulated
PAN-TERM ®
Terminals

Red, Blue,
Yellow

—

—

1

CD-720PV8-2

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B32

CD-2001 Crimping Dies
Compression dies for crimping tools:
CT-2001 and CT-2002

Used to Install PANDUIT Compression Lug &
Splice Sizes

CD-2001-6

#6 AWG

Blue P24

—

—

1

CD-2001-4

#4 AWG STR
#3 AWG STR
#2 AWG SOL

Gray P29

#6 AWG

Gray P29

1

CD-2001-2

#2 AWG

Brown P33

—

—

1

CD-2001-1

#1 AWG

Green P37

#4 AWG

Green P37

1

CD-2001-1/0

1/0 AWG

Pink P42

#2 AWG

Pink P42

1

CD-2001-2/0

2/0 AWG

Black P45

#1 AWG

Gold P45

1

CD-2001-3/0

3/0 AWG

Orange P50

1/0 AWG

Tan P50

1

CD-2001-4/0

4/0 AWG

Purple P54

2/0 AWG

Olive P54

1

CD-2001-250

250 kcmil

Yellow P62

3/0 AWG

Ruby P62

1

CD-2001-300

300 kcmil

White P66

4/0 AWG

White P66

1

CD-2001-350

350 kcmil

Red P71

250 kcmil

Red P71

1

CD-2001-400

400 kcmil

Blue P76

300 kcmil

Blue P76

1

CD-2001-500

500 kcmil

Brown P87

—

—

1

Power Connectors

Aluminum
Copper Code
Copper
Aluminum Std.
Code
Conductor Die Color & Conductor Die Color Pkg.
Part Number
Size
Die No.
& Die No. Qty.
Size
CD-2001-8
#8 AWG
Red P21
—
—
1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B33

CD-920 Crimping Dies
Compression dies for crimping tools:
CT-930, CT-2931, CT-2930, CT-2940*,
CT-930CH, CT-940CH* and CT-930LPCH

Used to Install PANDUIT Compression
Lug & Splice Sizes

Power Connectors

Part Number
CD-920-8

Copper
Code
Conductor
Size
#8 AWG

Copper
Die Color
& Die No.
Red P21

Aluminum
Aluminum Std.
Code
Conductor Die Color Pkg.
& Die No. Qty.
Size
—
—
1

CD-920-6

#6 AWG

Blue P24

—

—

CD-920-4

#4 AWG

Gray P29

#6 AWG

Gray P29

1

CD-920-2

#2 AWG

Brown P33

—

—

1

CD-920-1

#1 AWG

Green P37

#4 AWG

Green P37

1

CD-920-1/0

1/0 AWG

Pink P42

#2 AWG

Pink P42

1

CD-920-2/0

2/0 AWG

Black P45

#1 AWG

Gold P45

1

CD-920-3/0

3/0 AWG

Orange P50

1/0 AWG

Tan P50

1

CD-920-4/0

4/0 AWG

Purple P54

2/0 AWG

Olive P54

1

CD-920-250

250 kcmil

Yellow P62

3/0 AWG

Ruby P62

1

CD-920-300

300 kcmil

White P66

4/0 AWG

White P66

1

CD-920-350

350 kcmil

Red P71

250 kcmil

Red P71

1

CD-920-400

400 kcmil

Blue P76

300 kcmil

Blue P76

1

CD-920-500

500 kcmil

Brown P87

350 kcmil

Brown P87

1

CD-920-600

600 kcmil

Green P94

400 kcmil

Green P94

1

Pink P99

500 kcmil

Pink P99

1

CD-920-500A 500 kcmil flex,
600 kcmil flex
CD-920-750

750 kcmil

Black P106

600 kcmil Black P106

1

1

*Requires CD-940-DA die adapter.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B34

Die Adapter
Die adapter for crimping tools:
CT-2940 and CT-940CH

Part Number
CD-940-DA

Std.
Pkg.
Qty.
1

Power Connectors

Part Description
Die Adapter for use with PANDUIT CD-920,
CDM-920 and CD-930 crimping dies.

CD-940 Crimping Dies
Compression dies for crimping tools:
CT-2940 and CT-940CH

Used to Install PANDUIT Compression
Lug & Splice Sizes

Part Number
CD-940-750

Copper
Conductor
Size
750 kcmil

Copper
Aluminum Aluminum Std.
Die Color Conductor Die Color & Pkg.
& Die No.
Size
Die No.
Qty.
Black P106
—
—
1

CD-940-800

800 kcmil

Orange P107

—

—

CD-940-1000

1000 kcmil

White P125

—

—

1
1

CD-940-750X

777.7 kcmil Yellow P115
flex

—

—

1

CD-940-750A

—

—

750 kcmil

Red P125

1

CD-940-800A

—

—

800 kcmil

Gray P140

1

CD-940-1000A

—

—

1000 kcmil Brown P161

1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B35

UNI-DIE ™ Dieless, Crimping Tools and
Crimp Heads

CT-2981

CT-980CH

CT-980LPCH

Power Connectors

CT-980

Std.
Pkg.
Qty.
1

Part Number
CT-980

Description
UNI-DIE ™ Dieless, Manual Hydraulic, 6.2 Ton,
Crimping Tool; Includes tool case;
Installs #4 AWG - 750 kcmil PAN-LUG ™
Compression Connectors.

CT-2981

UNI-DIE ™ Dieless, Battery Powered Hydraulic,
6.2 Ton, Crimping Tool; Includes two batteries,
charger, tool case; Installs #4 AWG - 750 kcmil
PAN-LUG ™ Compression Connectors.

1

CT-980CH

UNI-DIE ™ Dieless, Remote Hydraulic, 6.2 Ton,
Crimp Head used with 10,000 PSI hydraulic
system; Includes tool case and female Parker
type quick-connect fitting assembled to tool;
Installs #4 AWG - 750 kcmil PAN-LUG ™
Compression Connectors.▲

1

CT-980LPCH

UNI-DIE ™ Dieless, Remote Hydraulic, 4.7 Ton,
Crimp Head; Includes tool case and male Parker
type quick-connect fitting assembled to tool;
Installs #4 AWG - 250 kcmil PAN-LUG ™
Compression Connectors.■

1

▲

CT-980CH to be used with CT-901HP and CT-900HPH. See page B29
for more information.
■
CT-980LPCH to be used with CT-8250HP, CT-900LPHPH and
CT-901RFS. See page B30 for more information.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B36

Pressure Gauges

CG-940

CG-980

PG-1

Power Connectors

CG-920

Std.
Pkg.
Qty.
1

Part Number
CG-920

Description
Compression Gauge; Used to measure crimping
force generated by PANDUIT crimping tools:
CT-930, CT-930CH, CT-930LPCH, CT-2930
and CT-2931; Includes blank die set and
storage case.

CG-940

Compression Gauge; Used to measure output
force generated by PANDUIT crimping tools:
CT-940CH and CT-2940; Includes blank die set
and storage case.

1

CG-980

Compression Gauge; Used to insure proper
compression force for UNI-DIE ™ Dieless
Crimping Tools: CT-980, CT-980CH, CT-2980
and CT-2981; Includes fixture for mounting
gauge in crimping tool and storage case.

1

PG-1

In-Line Pressure Gauge; Provides visual
verification of hydraulic output pressure when
used with CT-930LPCH and CT-980LPCH crimp
heads, CT-8250HP pump and CT-900LPHPH
hose; Includes storage case.

1

PG-1SC

In-Line Pressure Gauge provides visual
identification of hydraulic output pressure
when used with PANDUIT CT-8250HP pump
and CT-900LPHPH hose; Includes steel
storage case.

1

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B37

Features and Benefits – PAN-LUG ™
Compression Connectors
Bolded features are unique to PANDUIT.

Copper Lugs

Power Connectors

Color coded bands for
proper die selection
and crimp placement

Internally beveled barrel
end for easy conductor
insertion (types LCCF and
LCAF available with flared
entry for flex conductor)

Easy-to-read, color
coded die index numbers
for PANDUIT and
specified competitor
crimping dies
for selection

Inspection windows
available to
assure complete
conductor insertion

Made from seamless,
high conductivity copper
tubing and electro tin
plated and burnished to
inhibit corrosion

Part number, stud
size and conductor
size marked on part
for easy identification

Aluminum Lugs

Easy-to-read
die index numbers
for PANDUIT and
specified competitor
crimping dies
for selection
Part number and
conductor size
marked on part for
easy identification
Made from seamless
wrought aluminum and
electro tin plated to
inhibit corrosion

B38

Color coded
end plugs
for proper
die selection
Crimping areas
marked on part
for proper
crimp placement

Factory pre-filled
with oxide inhibitor
to prevent oxidation

Features and Benefits – PAN-LUG ™
Compression Connectors (continued)
Copper HTAPs
Easy-to-read,
color coded
die index number
for PANDUIT
crimping dies,
legible after crimping,
for selection

Slotted design to
reduce installation
time when used
with PANDUIT cable
ties (included)
Made from high
conductivity copper
and electro tin plated
to inhibit corrosion

Clear Covers for Copper HTAPs
Optically clear to allow
360° inspections
Made from high
impact strength
self-extinguishing
plastic with UL94V-0
flammability rating
and minimum
oxygen index of 28
Built-in flanges
retain HTAP in cover
Easy to assemble
snap-on design
Molded in flash
barriers protect against
electrical flash over

Retainer clips to hold labels inside
cover*. Retainer clips have a writeon surface for manual marking

Power Connectors

Conductor sizes for
each tap pocket
marked on part

Part number and agency
listings marked on part
for easy identification

Corresponding
PANDUIT HTAP
part number,
voltage rating and
temperature rating
molded into
cover half for
easy identification
Low profile
design minimizes
space requirements
Flexible fingers closely conform to
conductor preventing foreign objects
from entering cover

*Labels shown printed with PANDUIT LS7 Printer.

Copper In-Line Reducing Splices
Internally beveled barrel end
for easy conductor insertion
Easy-to-read, color coded
die index numbers for
PANDUIT and specified
competitor crimping dies
for selection
Made from seamless, high
conductivity copper tubing
and electro tin plated and
burnished to inhibit corrosion

Compact size provides
low profile installation
Part number and conductor
size and type marked on
part for easy identification
Color coded for proper
die selection
Inspection windows
to assure complete
conductor insertion
Crimping areas marked
on each barrel for proper
crimp placement

For service and technical support, call 800-777-3300
or visit www.panduit.com.

B39

PAN-LUG ™ Copper Compression Connectors
Code Conductor, One-Hole, Short Barrel
with Window Lug

Power Connectors

Type LCAS
• For use with stranded copper conductors
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

Part Number
LCAS8-10-L

Copper Conductor Size

LCAS8-14-L
LCAS8-56-L

#8 AWG

Stud Hole
Size
(In.)
#10

Std.
Pkg.
Qty.
50

1/4

50

5/16

50

LCAS8-38-L

3/8

50

LCAS6-10-L

#10

50

LCAS6-14-L

1/4

50

#6 AWG

5/16

50

LCAS6-38-L

3/8

50

LCAS4-10-L

#10

50

LCAS4-14-L

1/4

50

LCAS6-56-L

#4 AWG

5/16

50

3/8

50

LCAS2-14-Q

1/4

25

LCAS2-56-Q

5/16

25

3/8

25

1/4

20

LCAS4-56-L
LCAS4-38-L

#2 AWG

LCAS2-38-Q
LCAS1-14-E
LCAS1-56-E

#1 AWG

LCAS1-38-E
LCAS1/0-38-X

1/0 AWG

LCAS2/0-14-X
LCAS2/0-38-X

2/0 AWG

LCAS2/0-12-X
LCAS3/0-38-X

3/0 AWG

LCAS4/0-38-X
LCAS4/0-12-X
LCAS250-12-X

4/0 AWG
250 kcmil

5/16

20

3/8

20

3/8

10

1/4

10

3/8

10

1/2

10

3/8

10

3/8

10

1/2

10

1/2

10

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.
Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B40

Code Conductor, One-Hole, Standard
Barrel with Window Lug
Type LCA
• For use with stranded copper conductors
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

Copper Conductor Size

LCA8-14-L
#8 AWG

Std.
Pkg.
Qty.
50

1/4

50

5/16

50

LCA8-38-L

3/8

50

LCA6-10-L

#10

50

LCA6-14-L

1/4

50

LCA8-56-L

#6 AWG

5/16

50

3/8

50

LCA4-14-L

1/4

50

LCA4-56-L

5/16

50

3/8

50

LCA2-14-Q

1/4

25

LCA2-56-Q

5/16

25

3/8

25

LCA2-12-Q

1/2

25

LCA1-14-E

1/4

20

LCA1-56-E

5/16

20

3/8

20

LCA1-12-E

1/2

20

LCA1/0-14-X

1/4

10

LCA1/0-56-X

5/16

10

3/8

10

LCA1/0-12-X

1/2

10

LCA2/0-14-X

1/4

10

LCA2/0-56-X

5/16

10

3/8

10

1/2

10

LCA6-56-L
LCA6-38-L

#4 – #3 AWG STR, #2 AWG SOL

LCA4-38-L

LCA2-38-Q

LCA1-38-E

LCA1/0-38-X

LCA2/0-38-X
LCA2/0-12-X

#2 AWG

#1 AWG

1/0 AWG

2/0 AWG

Power Connectors

Part Number
LCA8-10-L

Stud Hole
Size
(In.)
#10

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.
continued on page B42
Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B41

Code Conductor, One-Hole, Standard
Barrel with Window Lug (continued)

Power Connectors

Type LCA
• For use with stranded copper conductors
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

Part Number

Copper Conductor Size

Stud Hole
Size
(In.)

Std.
Pkg.
Qty.

LCA3/0-14-X

1/4

10

LCA3/0-56-X

5/16

10

3/8

10

LCA3/0-38-X

3/0 AWG

LCA3/0-12-X

1/2

10

LCA4/0-56-X

5/16

10

3/8

10

LCA4/0-38-X

4/0 AWG

LCA4/0-12-X

1/2

10

LCA250-56-X

5/16

10

3/8

10

LCA250-38-X

250 kcmil

LCA250-12-X
LCA300-12-X

300 kcmil

LCA350-38-X
LCA350-12-X

350 kcmil

1/2

10

1/2

10

3/8

10

1/2

10

LCA400-12-6

400 kcmil

1/2

6

LCA500-12-6

500 kcmil

1/2

6

LCA600-12-6

600 kcmil

1/2

6

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B42

Code Conductor, One-Hole, Long
Barrel Lug
Type LCB
• For use with stranded copper conductors
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies
• Tested by Telcordia – meets NEBS
Level 3

Copper Conductor Size
#8 AWG

LCB6-14-L
#6 AWG

LCB6-38-L

Std.
Pkg.
Qty.
50

1/4

50

3/8

50

LCB4-14-L

#4 – 3 AWG STR, #2 AWG SOL

1/4

50

LCB2-56-Q

#2 AWG

5/16

25

LCB1-56-E

#1 AWG

5/16

20

LCB1/0-38-X

1/0 AWG

3/8

10

3/8

10

1/2

10

3/8

10

1/2

10

3/8

10

LCB2/0-38-X
LCB2/0-12-X

2/0 AWG

LCB3/0-38-X
LCB3/0-12-X

3/0 AWG

LCB4/0-38-X
LCB4/0-12-X

4/0 AWG

1/2

10

LCB250-12-X

250 kcmil

1/2

10

LCB350-12-X

350 kcmil

1/2

10

LCB500-12-6

500 kcmil

1/2

6

Power Connectors

Part Number
LCB8-14-L

Stud Hole
Size
(In.)
1/4

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B43

Code Conductor, Two-Hole, Standard
Barrel with Window Lug

Power Connectors

Type LCD
• For use with stranded copper conductors
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

Part Number
LCD8-10A-L

Copper Conductor
Size

Stud Hole Stud Hole Std.
Size
Spacing Pkg.
(In.)
(In.)
Qty.
#10
.63
50
1/4

.63

50

1/4

.75

50

LCD8-14D-L

1/4

1.00

50

LCD6-10A-L

#10

.63

50

1/4

.63

50

1/4

.75

50

LCD6-14D-L

1/4

1.00

50

LCD6-38D-L

3/8

1.00

50

LCD4-14A-L

1/4

.63

50

1/4

.75

50

1/4

1.00

50

LCD4-38D-L

3/8

1.00

50

LCD2-14A-Q

1/4

.63

25

1/4

.75

25

1/4

1.00

25

LCD2-38D-Q

3/8

1.00

25

LCD1-14A-E

1/4

.63

20

LCD8-14A-L
LCD8-14B-L

#8 AWG

LCD6-14A-L
LCD6-14B-L

LCD4-14B-L
LCD4-14D-L

#6 AWG

#4 – #3 AWG STR,
#2 AWG SOL

LCD2-14B-Q
LCD2-14D-Q

LCD1-38D-E
LCD1/0-38D-X

#2 AWG

#1 AWG
1/0 AWG

LCD2/0-14B-X
LCD2/0-38D-X
LCD3/0-38D-X

2/0 AWG
3/0 AWG

3/8

1.00

20

3/8

1.00

10

1/4

.75

10

3/8

1.00

10

3/8

1.00

10

LCD4/0-38D-X

4/0 AWG

3/8

1.00

10

LCD250-38D-X

250 kcmil

3/8

1.00

10

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B44

Code Conductor, Two-Hole, Long
Barrel Lug
Type LCC
• For use with stranded copper conductors
• UL Listed and CSA Certified when
crimped with PANDUIT and specified
competitor crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

LCC6-14A-L
LCC6-14B-L

#6 AWG

LCC6-38D-L
LCC4-14A-L

#4 – #3 AWG STR,
#2 AWG SOL

Stud Hole Stud Hole Std.
Size
Spacing Pkg.
(In.)
(In.)
Qty.
1/4
.63
50
1/4

.63

50

1/4

.75

50

3/8

1.00

50

1/4

.63

50

LCC2-56B-Q

5/16

.75

25

LCC2-38D-Q

3/8

1.00

25

3/8

1.75

25

1/2

1.75

25

LCC2-38-Q

#2 AWG

LCC2-12-Q
LCC1-14A-E

#1 AWG

1/4

.63

20

LCC1/0-12-X

1/0 AWG

1/2

1.75

10

LCC2/0-38D-X
LCC2/0-12-X

2/0 AWG

3/8

1.00

10

1/2

1.75

10

LCC3/0-12-X

3/0 AWG

1/2

1.75

10

LCC4/0-12-X◆

4/0 AWG

1/2

1.75

10

LCC250-12-X◆

250 kcmil

1/2

1.75

10

LCC300-12-X◆

300 kcmil

1/2

1.75

10

LCC350-12-X◆

350 kcmil

1/2

1.75

10

LCC400-12-6◆

400 kcmil

1/2

1.75

6

LCC500-12-6◆

500 kcmil

1/2

1.75

6

LCC600-12-6◆

600 kcmil

1/2

1.75

6

LCC750-12-6◆

750 kcmil

1/2

1.75

6

Power Connectors

Part Number
LCC8-14A-L

Copper Conductor
Size
#8 AWG

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.
◆NEMA hole sizes and spacing.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B45

Code Conductor, Standard Barrel,
Butt Splice

Power Connectors

Type SCS
• For use with stranded copper conductors
• UL Listed and CSA Certified when
crimped with PANDUIT and specified
competitor crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

Copper Conductor Size
#8 AWG

Length
(In.)
1.50

Std.
Pkg.
Qty.
50

SCS6-L

#6 AWG

1.75

50

SCS4-L

1.75

50

SCS2-Q

#4 – #3 AWG STR,
#2 AWG SOL
#2 AWG

1.87

25

SCS1-E

#1 AWG

1.87

20

SCS1/0-X

1/0 AWG

1.87

10

SCS2/0-X

2/0 AWG

2.00

10

SCS3/0-X

3/0 AWG

2.12

10

SCS4/0-X

4/0 AWG

2.12

10

SCS250-X

250 kcmil

2.25

10

SCS350-X

350 kcmil

2.37

10

SCS500-6

500 kcmil

2.87

6

Part Number
SCS8-L

For complete tool and die information, see the Electrical Solutions
Catalog, SA-ELCB03, at www.panduit.com.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B46

Code Conductor, Long Barrel, Butt Splice
Type SCL
• For use with stranded copper conductors
• UL Listed and CSA Certified when
crimped with PANDUIT and specified
competitor crimping tools and dies
• Tested by Telcordia – meets
NEBS Level 3

Copper Conductor Size
#8 AWG

Std.
Pkg.
Qty.
50

SCL6-L

#6 AWG

2.38

50

SCL4-L

2.38

50

SCL2-Q

#4 – #3 AWG STR,
#2 AWG SOL
#2 AWG

2.62

25

SCL1-E

#1 AWG

2.87

20

SCL1/0-X

1/0 AWG

2.87

10

SCL2/0-X

2/0 AWG

3.13

10

SCL3/0-X

3/0 AWG

3.12

10

SCL4/0-X

4/0 AWG

3.37

10

SCL250-X

250 kcmil

3.38

10

SCL350-X

350 kcmil

4.12

10

SCL500-6

500 kcmil

4.62

6

SCL600-6

600 kcmil

5.50

6

Power Connectors

Part Number
SCL8-L

Length
(In.)
2.25

For complete tool and die information, see the Electrical Solutions
Catalog, SA-ELCB03, at www.panduit.com.

Code Conductor, Parallel Splice
Type PS
• For use with stranded copper conductors

Max.
25,000

Length
(In.)
.40

Std.
Pkg.
Qty.
50

Circular MIL Range
Part Number
PS8-L

Min.
19,000

PS6-L

25,000

40,000

.44

50

PS2-Q

65,000

100,000

.64

25

PS4/0-X

240,000

280,000

.77

10

For complete tool and die information, see the Electrical Solutions
Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B47

Flex Conductor, One-Hole, Standard
Barrel with Window Lug

Power Connectors

Type LCAX
• For use with flexible and extra-flexible
copper conductors
• For use with code stranded copper conductors
up to 4/0 AWG
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies

Flex Conductor Size
Part Number
LCAX8-10-L

Class
G, H, I, K, M

Locomotive

#8 AWG

#8 AWG

LCAX8-14-L

Stud Hole Std.
Size
Pkg.
(In.)
Qty.
#10
50
1/4

50

5/16

50

LCAX8-38-L

3/8

50

LCAX6-10-L

#10

50

LCAX6-14-L

1/4

50

LCAX8-56-L

LCAX6-56-L

#6 AWG

#6 AWG

5/16

50

LCAX6-38-L

3/8

50

LCAX4-14-L

1/4

50

5/16

50

LCAX4-38-L

3/8

50

LCAX2-14-E

1/4

20

LCAX2-56-E

5/16

20

LCAX4-56-L

LCAX2-38-E

#4 AWG

#2 AWG

#5, #4, #3 AWG

#2 AWG

3/8

20

LCAX2-12-E

1/2

20

LCAX1-14-X

1/4

10

LCAX1-56-X

5/16

10

LCAX1-38-X

#1 AWG

#1 AWG

3/8

10

LCAX1-12-X

1/2

10

LCAX1/0-14-X

1/4

10

LCAX1/0-56-X

5/16

10

3/8

10

1/2

10

LCAX1/0-38-X

1/0 AWG

LCAX1/0-12-X

1/0 AWG

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B48

Flex Conductor, One-Hole, Standard
Barrel with Window Lug (continued)
Type LCAX
• For use with flexible and extra-flexible
copper conductors
• For use with code stranded copper conductors
up to 4/0 AWG
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies

Part Number
LCAX2/0-14-X

Locomotive

2/0 AWG

2/0 AWG

LCAX2/0-56-X

Stud Hole Std.
Size
Pkg.
(In.)
Qty.
1/4
10
5/16

10

3/8

10

LCAX2/0-12-X

1/2

10

LCAX3/0-14-X

1/4

10

LCAX3/0-56-X

5/16

10

3/8

10

LCAX2/0-38-X

LCAX3/0-38-X

3/0 AWG

3/0 AWG

LCAX3/0-12-X

1/2

10

LCAX4/0-56-X

5/16

10

3/8

10

LCAX4/0-38-X

4/0 AWG

4/0 AWG

LCAX4/0-12-X

1/2

10

LCAX250-56-X

5/16

10

3/8

10

1/2

10

1/2

6

3/8

6

1/2

6

1/2

6

LCAX250-38-X

250 kcmil

262.6 kcmil

LCAX250-12-X
LCAX300-12-6

300 kcmil

313.1 kcmil

LCAX350-38-6
LCAX350-12-6
LCAX500-12-6

350 kcmil

373.7 kcmil

500 kcmil

535.3 kcmil

Power Connectors

Flex Conductor Size
Class
G, H, I, K, M

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B49

Flex Conductor, One-Hole, Standard
Barrel with Window, Flared Lug
Type LCAF
• For use with flexible and extra-flexible
copper conductors
• Tested by Telcordia – meets NEBS Level 3

Power Connectors

Flex Conductor Size
Stud Hole
Size
(In.)
1/4

Std.
Pkg.
Qty.
50

3/8

50

1/4

50

3/8

50

1/4

20

3/8

20

3/8

10

LCAF1/0-14-X

1/4

10

LCAF1/0-56-X

5/16

10

3/8

10

LCAF1/0-12-X

1/2

10

LCAF2/0-38-X

3/8

10

1/2

10

3/8

10

1/2

10

3/8

10

1/2

10

Part Number
LCAF6-14-L
LCAF6-38-L

Class K & M

Locomotive

#6 AWG

#6 AWG

LCAF4-14-L
LCAF4-38-L

#4 AWG

#4 AWG

LCAF2-14-E
LCAF2-38-E
LCAF1-38-X

LCAF1/0-38-X

LCAF2/0-12-X

#2 AWG

#2 AWG

#1 AWG

#1 AWG

1/0 AWG

2/0 AWG

1/0 AWG

2/0 AWG

LCAF3/0-38-X
LCAF3/0-12-X

3/0 AWG

3/0 AWG

LCAF4/0-38-X
4/0 AWG

4/0 AWG

LCAF250-12-X

250 kcmil

262.6 kcmil

1/2

10

LCAF350-12-6

350 kcmil

373.7 kcmil

1/2

6

LCAF400-12-6

400 kcmil

444.4 kcmil

1/2

6

LCAF600-12-6

—

646.4 kcmil

1/2

6

LCAF4/0-12-X

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.

Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B50

Flex Conductor, One-Hole, Long Barrel
with Window Lug
Type LCBX
• For use with flexible and extra-flexible
copper conductors
• For use with code stranded copper conductors
up to 4/0 AWG
• UL Listed and CSA Certified when crimped
with PANDUIT and specified competitor
crimping tools and dies

Stud Hole
Size
(In.)
1/4

Std.
Pkg.
Qty.
50

1/4

50

3/8

50

#5, #4, #3 AWG

1/4

50

#1 AWG

#1 AWG

5/16

10

1/0 AWG

1/0 AWG

3/8

10

3/8

10

1/2

10

3/8

10

3/8

10

1/2

10

Class
G, H, I, K, M
#8 AWG

Locomotive
#8 AWG

#6 AWG

#6 AWG

LCBX4-14-L

#4 AWG

LCBX1-56-X
LCBX1/0-38-X

Part Number
LCBX8-14-L
LCBX6-14-L
LCBX6-38-L

LCBX2/0-38-X
LCBX2/0-12-X
LCBX3/0-38-X

2/0 AWG

2/0 AWG

3/0 AWG

3/0 AWG

LCBX4/0-38-X
4/0 AWG

4/0 AWG

LCBX350-12-6

350 kcmil

373.7 kcmil

1/2

6

LCBX500-12-6

500 kcmil

535.3 kcmil

1/2

6

LCBX4/0-12-X

Power Connectors

Flex Conductor Size

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B51

Flex Conductor, Two-Hole, Standard
Barrel with Window Lug

Power Connectors

Type LCDX
• For use with flexible and extra-flexible
copper conductors
• For use with code stranded copper conductors
up to 4/0 AWG
• UL Listed and CSA Certified when crimped
with PANDUIT and specified
competitor crimping tools
and dies

Part Number
LCDX8-10A-L
LCDX8-14A-L
LCDX8-14B-L
LCDX8-14D-L
LCDX6-10A-L
LCDX6-14A-L
LCDX6-14B-L
LCDX6-14D-L
LCDX6-38D-L
LCDX4-14A-L
LCDX4-14B-L
LCDX4-14D-L
LCDX4-38D-L
LCDX2-14A-E
LCDX2-14B-E
LCDX2-14D-E
LCDX2-38D-E
LCDX1-14A-X
LCDX1-38D-X
LCDX1/0-38D-X
LCDX2/0-14B-X
LCDX2/0-38D-X
LCDX3/0-38D-X
LCDX3/0-12-X◆
LCDX4/0-38D-X
LCDX250-38D-X
LCDX250-12-X◆
LCDX300-12-6◆
LCDX600-12-6◆
LCDX750-12-3◆

Flex Conductor Size
Class
Locomotive
G, H, I, K, M

#8 AWG

#8 AWG

#6 AWG

#6 AWG

#4 AWG

#5, #4, #3 AWG

#2 AWG

#2 AWG

#1 AWG

#1 AWG

1/0 AWG

1/0 AWG

2/0 AWG

2/0 AWG

3/0 AWG
3/0 AWG
4/0 AWG

3/0 AWG
3/0 AWG
4/0 AWG

250 kcmil

262.6 kcmil

300 kcmil
600 kcmil
—

313.1 kcmil
—
777.7 kcmil

Stud Hole Std.
Size
Pkg.
(In.)
Qty.
#10
50
1/4
50
1/4
50
1/4
50
#10
50
1/4
50
1/4
50
1/4
50
3/8
50
1/4
50
1/4
50
1/4
50
3/8
50
1/4
20
1/4
20
1/4
20
3/8
20
1/4
10
3/8
10
3/8
10
1/4
10
3/8
10
3/8
10
1/2
10
3/8
10
3/8
10
1/2
10
1/2
6
1/2
6
1/2
3

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.
◆NEMA hole sizes and spacing.
Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.

B52

Flex Conductor, Two-Hole, Long Barrel
with Window Lug
Type LCCX
• For use with flexible and extra-flexible
copper conductors
• For use with code stranded copper
conductors up to 4/0 AWG
• UL Listed and CSA Certified when
crimped with PANDUIT and specified
competitor crimping tools
and dies

Part Number
LCCX8-14A-L

Class
G, H, I, K, M
#8 AWG

Locomotive
#8 AWG

#6 AWG

#6 AWG

LCCX6-14A-L
LCCX6-14B-L
LCCX6-38D-L
LCCX4-14A-L

Stud Hole
Size
(In.)
1/4

Std.
Pkg.
Qty.
50

1/4

50

1/4

50

3/8

50

1/4

50

3/8

20

1/2

20

#4 AWG

#5, #4, #3
AWG

#2 AWG

#2 AWG

LCCX1-14A-X

#1 AWG

#1 AWG

1/4

10

LCCX1/0-12-X

1/0 AWG

1/0 AWG

1/2

10

3/8

10

1/2

10

LCCX2-38D-E
LCCX2-12-E

LCCX2/0-38D-X
2/0 AWG

2/0 AWG

◆
LCCX4/0-12-X◆

4/0 AWG

4/0 AWG

1/2

10

◆
LCCX350-12-6◆

350 kcmil

373.7 kcmil

1/2

6

◆
LCCX500-12-6◆

500 kcmil

535.3 kcmil

1/2

6

LCCX2/0-12-X

Power Connectors

Flex Conductor Size

For 45° and 90° bent lugs available as standard parts and complete tool
and die information, see the Electrical Solutions Catalog, SA-ELCB03, at
www.panduit.com.
◆NEMA hole sizes and spacing.

Prime items appear in BOLD.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

B53

Technical Specification and
Selection Information
PANDUIT Terminal Approvals

Logo
(Symbol)

Agency

Spec/Approval

#E52164 – UL486A

Underwriters
Laboratories, #E78522 – UL310
Inc.

Canadian
Standards
Association

Applicable
Products

Minimum Tensile
Strength (Pull out
All Ring and
force for the crimp
Fork
terminal) and test
Terminals
current for Max.
50°C Rise (Amps)
Minimum Tensile
Strength (Pull out
force for the crimp
terminal) and
continuous test
All
current for Max.
Disconnects
30°C Rise (Amps)
(for .187", .205",
.250" tab widths)
and (.110"
tab width)
Minimum Tensile
Strength (Pull out
force for the crimp
All Splices
terminal) and test
current for Max.
50°C Rise (Amps)

Minimum Tensile
Strength (Pull out
force for the crimp
terminal) and test
#LR31212 – C22.2 No. 153 current for Max.
50°C Rise (Amps)

#LR31212 – C22.2 No. 65

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Technical Information

#E52164 – UL486C

Requirement

All Ring and
Fork
Terminals
All
Disconnects

C1

Performance Requirements
Applicable PAN-TERM ® products meet or exceed
the following test specifications:
•
•
•
•

UL486A (Terminals)
UL486C (Splices)
UL310 (Blade Adapters)
CSA C22.2 No. 65 (all designs)

UL and CSA approved products are shown with
the applicable logos in the product section.
UL file #E52164, CSA File #LR31212
Wire Size (AWG)
#26 #24 #22 #20 #18 #16 #14 #12 #10

UL 486A (TERMINALS), UL310 (MALE BLADE ADAPTERS)
Test Current for Max. 50°C
Rise (Amps)

3.5

7

9

12

17

18

30

35

50

3

5

8

13

20

30

50

70

80

5.5

7

9

12

17

18

30

35

50

Min. Tensile Strength* (Lbs.)
3
5
*Pull-out force of the crimped terminal

8

10

10

15

25

35

40

Min. Tensile Strength* (Lbs.)

UL 486C (SPLICES)
Test Current for Max. 50°C
Rise (Amps)

Technical Information

Applicable PAN-TERM ® products meet or exceed
the following test specifications:
• UL310 (Disconnects)
• CSA C22.2 No. 153 (all designs)
UL and CSA Listed products are shown with
the applicable logos in the product section.
UL file #E78522 and CSA file #LR31212.
Wire Size (AWG)
#22 #20 #18 #16 *#14 #12 #10

UL310 (DISCONNECTS)
Continuous Test Current for Max.
30°C Rise (amps)
(for 187", 205", 250" tab widths)

3

4

7

10

Continuous Test Current for Max.
30°C Rise (amps)
(for .110", tab width)

2

3

4

5

Min. Tensile Strength* (Lbs.)

8

13

20

30

*Pull-out force of the crimped disconnect.

C2

15

20

24

Not
Applicable
50

70

80

PANDUIT Power & Grounding Connector Approvals

Logo
(Symbol)

Agency

Applicable Products

UL 486A
CLRCVR, HTCT, CTAPF, CTAP,
Wire Connectors &
LCAX, LCBX, LCCX, LCDX, LCAN,
Soldering Lugs
LCDN, RSC, LCEX
for use in US & Canada

Underwriters
Laboratories,
Inc.

Copper & aluminum compression
connectors (except: PS, SCT,
HTAP, TAPC, SAR); Copper &
aluminum split bolts; Copper &
aluminum mechanical lugs &
splices (except: PNLC,
LAM2A1000, LAM3B, LAM3D,
LAM4D, PCSB750, LAM2LB800)

Underwriters
Laboratories,
Inc.

UL 486A
Wire Connectors &
Soldering Lugs
for use in US

UL 467
Grounding & Bonding SP1, SP2, SPF1, SPF2, GPL,
Equipment
GMS, GM
for use in US & Canada

Underwriters
Laboratories,
Inc.

UL 467
Grounding & Bonding
Equipment
for use in US

Underwriters
Laboratories,
Inc.

UL 486A
Wire Connectors &
Soldering Lugs
for use in US

CTAP, KP, WB, GC

LCA-00, LCD-00, LCC-00

Copper & aluminum compression
connectors (except: PS, SCT,
HTAP, TAPC, SAR, CTAP, BPC);
Copper & aluminum split bolts
(except: SBCL, VT, VTA);
Copper & aluminum mechanical
lugs & splices (except: ML, ML-T,
HL, HLB, HLA-90, PNL-2, HL-2,
HL-2N, HHL-2N, H2L-2N, P2NLT,
PNLC, HC, LAM2A1000, LAM2B,
LAM2SB600, LAM2SB750,
LAM3B, LAM3D, LAM4D,
PCSB750)

Canadian
Standards
Association

C22.2 No. 65-03
Wire Connectors

Canadian
Standards
Association

C22.2 No. 41-M1987
(R1999) Grounding
& Bonding Equipment

WB, KP

American
Bureau
of Shipping

ABS Rules
Steel Vessel Rules
1-1-4/7.7, 4-8-3/9.19,
4-8-4/21.27

Copper compression connectors
LCA, LCAF, LCAS, LCAX, LCB,
LCC, LCD, S-R,
LCDX, SCS, SCSF

Telcordia
Technologies,
Inc.

Network Equipment –
Building Systems

Copper compression connectors
LCAS, LCA, LCD, LCB, LCC,
LCAF, LCCF, SCSS,
SCS, SCL, SCSF

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Technical Information

NEBS
Level 3

Spec/Approval

Underwriters
Laboratories,
Inc.

C3

Technical Information

Equivalent Tables
Fractional Inches/Decimal Inches/Millimeters

C4

Stud Size Chart (Inches)

Standard Stud Size

#2

#4

Stud Size Decimal
.086" .112"
Equivalent
Terminal Hole
Diameter
Stud Size
Designation in
PANDUIT
Part Number

.090" .118"
2

4

#5

#10

1/4"

5/16"

.127" .138"

.164" .190"

.250"

.312"

.130" .147"

.173" .204"

.270"

.343"

14

56

5

#6

#8

6

8

10

3/8"

7/16"

1/2"

5/8"

Stud Size Decimal
Equivalent

.375"

.438"

.500"

.625"

Terminal Hole
Diameter

.392"*
.406"**

.456"

.531"

.656"

76

12

58

Stud Size
Designation in
PANDUIT
Part Number

38

Standard Stud Size

3/4"

7/8"

1"

Stud Size Decimal
Equivalent

.750"

.875"

1.00"

Terminal Hole
Diameter

.810"

.906"

1.031"

Stud Size
Designation in
PANDUIT
Part Number

34

78

1

Technical Information

Standard Stud Size

*Terminal Stud.
**Power Connector Stud.
For service and technical support, call 800-777-3300
or visit www.panduit.com.

C5

Common Conductor Sizes and Strandings
Reference Chart
Conductor

Technical Information

AWG

C6

Metric
mm2
0.05
0.06

Individual Strands
Diameter

No.
25
41
10
1
26
7
19
41
10
1
24
7
19
65
128
0.25
32
14
1
16
26
22
7
19
48
194
100
0.38
7
12
21
7
16
0.5
1
*10
1
41
20
26
*7
19
7
24
0.75
1
*16
1
65
18
41
*7
19
*Strandings required for UL

mm
.05
.05
.13
.41
.16
.10
.08
.16
.51
.20
.13
.07
.05
.10
.16
.64
.16
.13
.25
.16
.10
.05
.07
.27
.21
.16
.30
.20
.80
.25
.81
.13
.16
.32
.20
.37
.20
1.00
.25
1.02
.13
.16
.40
.25
and CSA

Overall Conductor Size
Diameter
Area

In.
mm
In.
.002
.25
.010
.002
.36
.014
.005
.53
.021
.016
.41
.016
.006
.48
.019
.004
.51
.020
.003
.58
.023
.006
.58
.023
.020
.51
.020
.008
.61
.024
.005
.61
.024
.003
.65
.026
.002
.65
.026
.004
.65
.026
.006
.65
.026
.025
.64
.025
.006
.76
.030
.005
.76
.030
.010
.76
.030
.006
.79
.031
.004
.80
.031
.002
.80
.031
.003
.80
.031
.011
.80
.031
.008
.80
.031
.006
.80
.031
.012
.90
.035
.008
.90
.035
.031
.80
.031
.010
.89
.035
.032
.81
.032
.005
.91
.036
.006
91
.036
.013
.97
.038
.008
.94
.037
.015
1.10
.043
.008
1.20
.047
.039
1.00
.039
.010
1.19
.047
.040
1.02
.040
.005
1.19
.047
.006
1.19
.047
.016
1.22
.048
.010
1.24
.049
Certification testing.

Circ.
MILS
97
159
250
256
278
304
384
397
400
448
475
484
496
496
556
625
635
650
700
754
744
752
760
791
820
833
977
992
992
1000
1024
1025
1032
1111
1216
1485
1488
1550
1600
1600
1625
1627
1770
1900

Common Conductor Sizes and Strandings
Reference Chart (continued)
Conductor

AWG

Metric
mm2

Individual Strands
Diameter

mm
0.25
1.13
.20
.43
.29
.16
.25
1.30
.13
.51
.25
.30
.10
.52
1.38
.16
.38
1.63
.25
.64
.25
.67
.30
.10
1.78
.45
.25
.16
2.06
.81
.30
2.26
.10
.52
.40
.36
.98
2.59
.25
.30
.10
2.76
1.05
.64
and CSA

In.
mm
In.
.010
1.30
.051
.044
1.13
.044
.008
1.30
.051
.017
1.30
.051
.011
1.47
.058
.006
1.50
.059
.010
1.50
.059
.051
1.30
.051
.005
1.50
.059
.020
1.52
.060
.010
1.70
.067
.012
1.60
.063
.004
1.90
.075
.020
1.60
.063
.054
1.38
.054
.006
1.85
.073
.014
1.85
.073
.064
1.63
.064
.010
1.85
.073
.025
1.85
.073
.010
2.20
.087
.026
2.10
.083
.012
2.20
.087
.004
2.20
.087
.070
1.78
.070
.018
2.36
.093
.010
2.41
.095
.006
2.41
.095
.081
2.06
.081
.032
2.44
.096
.012
3.10
.122
.089
2.26
.089
.004
3.00
.118
.020
2.70
.106
.016
2.92
.115
.014
2.95
.116
.039
2.95
.116
.102
2.59
.102
.010
2.95
.116
.012
3.50
.138
.004
3.70
.146
.109
2.76
.109
.041
3.20
.126
.025
3.30
.130
Certification testing.

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Circ.
MILS
1841
1979
1984
2006
2426
2580
2600
2601
2625
2828
2906
2930
2930
2934
2952
3786
3831
4096
4100
4481
4844
4871
4883
4883
4911
6088
6500
6549
6561
7168
7812
7917
7921
7963
9354
9880
10376
10404
10500
11718
11718
11807
11962
12063

Technical Information

No.
19
1
1.0
32
7
19
65
*26
16
1
105
*7
30
21
189
1.5
7
1
45
19
1
14
*41
*7
50
7
35
2.5
315
1
19
*65
165
12
1
*7
56
1
4.0
511
19
37
49
*7
10
1
*105
84
756
1
6.0
7
19
*Strandings required for UL

Overall Conductor Size
Diameter
Area

C7

Common Conductor Sizes and Strandings
Reference Chart (continued)
Conductor

AWG

Metric
mm2
6

9
8
10

mm
0.107

1
7

Circ.
MILS
11840

In.
0.042

mm
3.21

In.
0.126

2.77

0.109

2.77

0.109

11840

1.1

0.0432

3.3

0.13

13000

1

2.91

0.1144

2.91

0.114

13090

1

3.26

0.1285

3.25

0.128

16510

7

1.23

0.0486

3.7

0.146

16510

7

1.37

0.054

4.12

0.162

19740

1

3.58

0.141

3.58

0.141

19740

1.38

0.0545

4.15

0.164

20520

1

3.67

0.1443

3.67

0.144

20520

7

1.55

0.0612

4.66

0.184

26240

1

4.11

0.162

4.11

0.162

26240

7

1.73

0.008

5.13

0.204

31580

5

7

1.75

0.0688

5.24

0.206

33090

4

7

1.96

0.0772

5.88

0.232

41740

7

2.16

0.085

6.48

0.255

49340

19

1.32

0.052

6.6

0.26

49340

6
16

Technical Information

No.
7

Overall Conductor Size
Diameter
Area

7
7

25
3

7

2.2

0.0867

6.61

0.26

52620

2

7

2.47

0.0974

7.42

0.292

66300
69070

35
1
50

7

2.54

0.1

7.62

300

19

1.55

0.001

7.75

0.305

69070

19

1.5

0.0064

8.43

0.332

83690
98680

19

1.85

0.073

9.27

0.365

1/0

19

1.59

0.0745

9.46

0.373

10500

2/0

19

2.13

0.0837

10.6

0.419

133100

70
3/0
95
4/0

C8

Individual Strands
Diameter

19

2.18

0.086

10.9

0.43

138100

19

2.59

0.094

11.9

0.47

167800

36

1.71

0.0673

12

0.471

167800

19

2.57

0.101

12.8

0.505

187500

37

1.83

0.072

12.5

0.504

187500

19

2.89

0.1055

13.4

0.528

211600

Common Conductor Sizes and Strandings
Reference Chart (continued)
Conductor

AWG

250
kcmil
300
kcmil
350
kcmil

Metric
mm2
120

150

185
400
kcmil
240

500
kcmil

600
kcmil
700
kcmil
750
kcmil
400

800
kcmil
500
1000
kcmil
625

Overall Conductor Size
Diameter
Area

No.
37

mm
2.06

In.
0.081

mm
14.4

In.
0.567

37

2.07

0.0822

14.6

0.575

37

2.29

0.09

16

0.63

37

2.47

0.0973

17.3

0.681

37

2.54

0.1

17.8

0.7

37

2.64

0.104

18.5

0.728

37

2.9

0.114

20.3

0.798

61

2.26

0.089

20.3

0.801

37

2.95

0.1162

20.7

0.813

61

2.3

0.0905

20.7

0.814

61

2.51

0.099

22.6

0.891

61

2.52

0.0992

22.7

0.893

61

2.72

0.1071

24.5

0.964

61

2.82

0.1109

25.4

0.998

91

2.31

0.0908

25.4

0.998

61

2.9

0.114

26.1

1.026

61

2.91

0.1145

26.2

1.031

91

2.38

0.0938

26.2

1.032

61

3.25

0.128

28.3

1.152

91

2.66

0.1048

29.3

1.153

91

2.97

0.117

32.7

1.287

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Circ.
MILS
237.8
kcmil
250
kcmil
300
kcmil
350
kcmil
365.1
kcmil
400
kcmil
473.6
kcmil
473.6
kcmil
500
kcmil
500
kcmil
592.1
kcmil
600
kcmil
700
kcmil
750
kcmil
750
kcmil
798.4
kcmil
800
kcmil
800
kcmil
986.8
kcmil
1000
kcmil
1233.7
kcmil

Technical Information

300
kcmil

Individual Strands
Diameter

C9

Part Number Index
PANDUIT
Part
Number

Page
No.
B

BS10-L...........................A42
BS14-C ..........................A42
BS18-C ..........................A42
BS22-C ..........................A42
BSN10-L ........................A41
BSN14-C .......................A41
BSN18-C .......................A41
BSN22-C .......................A41
BSV10X-L......................A41
BSV14X-C .....................A41
BSV18X-CY...................A41

C

Page
No.

CD-720-6 .......................B32
CD-720-7 .......................B32
CD-720PV8-2 ................B32
CD-920-1 .......................B34
CD-920-1/0 ....................B34
CD-920-2 .......................B34
CD-920-2/0 ....................B34
CD-920-250 ...................B34
CD-920-3/0 ....................B34
CD-920-300 ...................B34
CD-920-350 ...................B34
CD-920-4 .......................B34
CD-920-4/0 ....................B34
CD-920-400 ...................B34
CD-920-500 ...................B34
CD-920-500A.................B34
CD-920-6 .......................B34
CD-920-600 ...................B34
CD-920-750 ...................B34
CD-920-8 .......................B34
CD-940-1000 .................B35
CD-940-1000A...............B35
CD-940-750 ...................B35
CD-940-750A.................B35
CD-940-750X.................B35
CD-940-800 ...................B35
CD-940-800A.................B35
CD-940-DA ....................B35
CG-920 ..........................B37
CG-940 ..........................B37
CG-980 ..........................B37
CST101 .........................A19
CST114-157 ..................A19
CST115 .........................A19
CT-100 ...........................A16
CT-1002 .........................A18

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Index

C-720.............................B31
CC-720 ..........................B31
CD-2001-1 .....................B33
CD-2001-1/0 ..................B33
CD-2001-2 .....................B33
CD-2001-2/0 ..................B33
CD-2001-250 .................B33
CD-2001-3/0 ..................B33
CD-2001-300 .................B33
CD-2001-350 .................B33
CD-2001-4 .....................B33
CD-2001-4/0 ..................B33
CD-2001-400 .................B33
CD-2001-500 .................B33
CD-2001-6 .....................B33
CD-2001-8 .....................B33
CD-720-1 .......................B32
CD-720-2 .......................B32
CD-720-3 .......................B32
CD-720-4 .......................B32
CD-720-5 .......................B32

PANDUIT
Part
Number

D1

Part Number Index

Index

PANDUIT
Part
Number

D2

Page
No.

CT-1003 .........................A18
CT-1004 .........................A18
CT-1005 .........................A18
CT-1006 .........................A18
CT-1014 .........................A17
CT-1015 .........................A17
CT-1525 .........................A17
CT-1550 .........................A17
CT-1551 .........................A17
CT-1570 .........................A17
CT-160 ...........................A16
CT-1700.................A17, B28
CT-1701 .........................A17
CT-200 ...........................A16
CT-2001 .........................B28
CT-260 ...........................A16
CT-2931 .........................B28
CT-2940 .........................B28
CT-2981 .........................B36
CT-300-1 ........................A18
CT-720 ...........................B28
CT-720-3 ........................B31
CT-720-3CC...................B31
CT-720-7 ........................B31
CT-720-7CC...................B31
CT-8250HP ....................B30
CT-900HPH....................B29
CT-900LPHPH ...............B30
CT-901HP ......................B29
CT-901RCH ...................B29
CT-901RFS ...........B29, B30
CT-930 ...........................B28
CT-930CH ......................B29
CT-930LPCH..................B30
CT-940CH ......................B29
CT-980 ...........................B36

PANDUIT
Part
Number

Page
No.

CT-980CH ......................B36
CT-980LPCH..................B36

D
D14-250B-C...................A34
D14-250MB-C................A38
D-250A-C.......................A34
DNF10-250FI-L..............A33
DNF10-250FIB-L ...........A32
DNF10-250FIMB-L ........A33
DNF10-250M-L..............A37
DNF14-187FIB-C...........A32
DNF14-188FIB-C...........A32
DNF14-205FIB-C...........A32
DNF14-206FIB-C...........A32
DNF14-250FIB-C...........A32
DNF14-250FIM-C ..........A33
DNF14-250FIMB-L ........A33
DNF14-250M-C .............A37
DNF18-110FIB-C...........A32
DNF18-111FIB-C...........A32
DNF18-187FIB-C...........A32
DNF18-188FIB-C...........A32
DNF18-205FIB-C...........A32
DNF18-206FIB-C...........A32
DNF18-250FIB-C...........A32
DNF18-250FIB-C...........A33
DNF18-250FIM-C ..........A33
DNF18-250M-C .............A37
DNFR14-250B-C ...........A35
DNFR14-250FIB-C ........A35
DNFR18-250B-C ...........A35
DNFR18-250FIB-C ........A35
DR10-250-L ...................A36
DR14-250B-C ................A36

Part Number Index
PANDUIT
Part
Number

Page
No.

DR14-250-C ..................A36
DV14-145M-C................A38
DV14-187B-C ................A33
DV14-188B-C ................A33
DV14-205B-C ................A33
DV14-250B-C ................A33
DV14-250MB-C .............A37
DV14-250P-C ................A34
DV18-145M-CY .............A38
DV18-187B-CY ..............A33
DV18-188B-CY ..............A33
DV18-250B-C ................A33
DV18-250MB-C .............A37
DV18-250P-CY ..............A34

F

Page
No.

F81-12-M .......................A48
F81-9-M .........................A48
F82-10-M .......................A48
F82-12-M .......................A48
F82-15-M .......................A48
F83-12-D .......................A49
F83-15-D .......................A49
F83-18-D .......................A49
F84-12-TL......................A49
F84-15-TL......................A49
F84-18-TL......................A49
F85-12-C .......................A49
F85-15-C .......................A49
F85-18-C .......................A49
F86-18-C .......................A49
F86-20-C .......................A49
F86-25-C .......................A49
F87-18-C .......................A49
F87-22-C .......................A49
F87-25-C .......................A49
FSD74-6-D ....................A46
FSD74-8-D ....................A46
FSD75-10-D ..................A46
FSD75-6-D ....................A46
FSD75-8-D ....................A46
FSD76-6-D ....................A46
FSD76-8-D ....................A46
FSD77-10-D ..................A46
FSD77-12-D ..................A46
FSD77-6-D ....................A46
FSD77-8-D ....................A46
FSD78-10-D ..................A46
FSD78-12-D ..................A46
FSD78-6-D ....................A46
FSD78-8-D ....................A46
FSD79-8-D ....................A46

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Index

F73-5-M .........................A48
F73-7-M .........................A48
F74-5-M .........................A48
F75-10-M .......................A48
F75-6-M .........................A48
F75-8-M .........................A48
F76-10-M .......................A48
F76-6-M .........................A48
F76-8-M .........................A48
F77-6-M .........................A48
F77-7-M .........................A48
F77-8-M .........................A48
F78-10-M .......................A48
F78-7-M .........................A48
F78-8-M .........................A48
F80-10-M .......................A48
F80-7-M .........................A48
F80-8-M .........................A48
F81-10-M .......................A48

PANDUIT
Part
Number

D3

Part Number Index
PANDUIT
Part
Number

Page
No.

FSD80-12-D ..................A46
FSD80-8-D ....................A46
FSD81-10-D ..................A46
FSD81-12-C ..................A46
FSD82-12-C ..................A46
FSD83-12-C ..................A46
FTD75-8-D.....................A47
FTD76-10-D...................A47
FTD76-8-D.....................A47
FTD77-10-D...................A47
FTD77-8-D.....................A47
FTD78-12-D...................A47
FTD78-8-D.....................A47
FTD80-10-TL .................A47
FTD80-13-TL .................A47
FTD81-12-C...................A47
FTD82-14-C...................A47

J
J214-312-T ....................A44
J318-412-T ....................A44
JN218-216-C .................A44
JN224-318-C .................A44
JN418-212-C .................A44

Index

K

D4

K-1000 ...........................A50
K-1102 ...........................A50
K-1104 ...........................A50
K1-PNKIT ......................A51
K2-PVKIT.......................A52
KP-1075.........................A50
KP-1165.........................A40

PANDUIT
Part
Number

Page
No.
L

LCA1-12-E.....................B41
LCA1-14-E.....................B41
LCA1-38-E.....................B41
LCA1-56-E.....................B41
LCA1/0-12-X..................B41
LCA1/0-14-X..................B41
LCA1/0-38-X..................B41
LCA1/0-56-X..................B41
LCA2-12-Q ....................B41
LCA2-14-Q ....................B41
LCA2-38-Q ....................B41
LCA2-56-Q ....................B41
LCA2/0-12-X..................B41
LCA2/0-14-X..................B41
LCA2/0-38-X..................B41
LCA2/0-56-X..................B41
LCA250-12-X.................B42
LCA250-38-X.................B42
LCA250-56-X.................B42
LCA3/0-12-X..................B42
LCA3/0-14-X..................B42
LCA3/0-38-X..................B42
LCA3/0-56-X..................B42
LCA300-12-X.................B42
LCA350-12-X.................B42
LCA350-38-X.................B42
LCA4-14-L .....................B41
LCA4-38-L .....................B41
LCA4-56-L .....................B41
LCA4/0-12-X..................B42
LCA4/0-38-X..................B42
LCA4/0-56-X..................B42
LCA400-12-6 .................B42
LCA500-12-6 .................B42
LCA6-10-L .....................B41

Part Number Index
PANDUIT
Part
Number

Page
No.

Page
No.

LCAS2/0-12-X ...............B40
LCAS2/0-14-X ...............B40
LCAS2/0-38-X ...............B40
LCAS250-12-X ..............B40
LCAS3/0-38-X ...............B40
LCAS4-10-L...................B40
LCAS4-14-L...................B40
LCAS4-38-L...................B40
LCAS4-56-L...................B40
LCAS4/0-12-X ...............B40
LCAS4/0-38-X ...............B40
LCAS6-10-L...................B40
LCAS6-14-L...................B40
LCAS6-38-L...................B40
LCAS6-56-L...................B40
LCAS8-10-L...................B40
LCAS8-14-L...................B40
LCAS8-38-L...................B40
LCAS8-56-L...................B40
LCAX1-12-X ..................B48
LCAX1-14-X ..................B48
LCAX1-38-X ..................B48
LCAX1-56-X ..................B48
LCAX1/0-12-X ...............B48
LCAX1/0-14-X ...............B48
LCAX1/0-38-X ...............B48
LCAX1/0-56-X ...............B48
LCAX2-12-E ..................B48
LCAX2-14-E ..................B48
LCAX2-38-E ..................B48
LCAX2-56-E ..................B48
LCAX2/0-12-X ...............B49
LCAX2/0-14-X ...............B49
LCAX2/0-38-X ...............B49
LCAX2/0-56-X ...............B49
LCAX250-12-X ..............B49

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Index

LCA6-14-L .....................B41
LCA6-38-L .....................B41
LCA6-56-L .....................B41
LCA600-12-6 .................B42
LCA8-10-L .....................B41
LCA8-14-L .....................B41
LCA8-38-L .....................B41
LCA8-56-L .....................B41
LCAF1-38-X...................B50
LCAF1/0-12-X................B50
LCAF1/0-14-X................B50
LCAF1/0-38-X................B50
LCAF1/0-56-X................B50
LCAF2-14-E...................B50
LCAF2-38-E...................B50
LCAF2/0-12-X................B50
LCAF2/0-38-X................B50
LCAF250-12-X...............B50
LCAF3/0-12-X................B50
LCAF3/0-38-X................B50
LCAF350-12-6 ...............B50
LCAF4-14-L ...................B50
LCAF4-38-L ...................B50
LCAF4/0-12-X................B50
LCAF4/0-38-X................B50
LCAF400-12-6 ...............B50
LCAF6-14-L ...................B50
LCAF6-38-L ...................B50
LCAF600-12-6 ...............B50
LCAS1-14-E ..................B40
LCAS1-38-E ..................B40
LCAS1-56-E ..................B40
LCAS1/0-38-X ...............B40
LCAS2-14-Q ..................B40
LCAS2-38-Q ..................B40
LCAS2-56-Q ..................B40

PANDUIT
Part
Number

D5

Part Number Index

Index

PANDUIT
Part
Number

D6

Page
No.

LCAX250-38-X ..............B49
LCAX250-56-X ..............B49
LCAX3/0-12-X ...............B49
LCAX3/0-14-X ...............B49
LCAX3/0-38-X ...............B49
LCAX3/0-56-X ...............B49
LCAX300-12-6...............B49
LCAX350-12-6...............B49
LCAX350-38-6...............B49
LCAX4-14-L...................B48
LCAX4-38-L...................B48
LCAX4-56-L...................B48
LCAX4/0-12-X ...............B49
LCAX4/0-38-X ...............B49
LCAX4/0-56-X ...............B49
LCAX500-12-6...............B49
LCAX6-10-L...................B48
LCAX6-14-L...................B48
LCAX6-38-L...................B48
LCAX6-56-L...................B48
LCAX8-10-L...................B48
LCAX8-14-L...................B48
LCAX8-38-L...................B48
LCAX8-56-L...................B48
LCB1-56-E.....................B43
LCB1/0-38-X..................B43
LCB2-56-Q ....................B43
LCB2/0-12-X..................B43
LCB2/0-38-X..................B43
LCB250-12-X.................B43
LCB3/0-12-X..................B43
LCB3/0-38-X .................B43
LCB350-12-X.................B43
LCB4-14-L .....................B43
LCB4/0-12-X..................B43
LCB4/0-38-X..................B43

PANDUIT
Part
Number

Page
No.

LCB500-12-6 .................B43
LCB6-14-L .....................B43
LCB6-38-L .....................B43
LCB8-14-L .....................B43
LCBX1-56-X ..................B51
LCBX1/0-38-X ...............B51
LCBX2/0-12-X ...............B51
LCBX2/0-38-X ...............B51
LCBX3/0-38-X ...............B51
LCBX350-12-6...............B51
LCBX4-14-L...................B51
LCBX4/0-12-X ...............B51
LCBX4/0-38-X ...............B51
LCBX500-12-6...............B51
LCBX6-14-L...................B51
LCBX6-38-L...................B51
LCBX8-14-L...................B51
LCC1-14A-E ..................B45
LCC1/0-12-X..................B45
LCC2-12-Q ....................B45
LCC2-38-Q ....................B45
LCC2-38D-Q..................B45
LCC2-56B-Q..................B45
LCC2/0-12-X..................B45
LCC2/0-38D-X ...............B45
LCC250-12-X.................B45
LCC3/0-12-X..................B45
LCC300-12-X.................B45
LCC350-12-X.................B45
LCC4-14A-L...................B45
LCC4/0-12-X..................B45
LCC400-12-6 .................B45
LCC500-12-6 .................B45
LCC6-14A-L...................B45
LCC6-14B-L...................B45
LCC6-38D-L ..................B45

Part Number Index
PANDUIT
Part
Number

Page
No.

Page
No.

LCD6-14D-L ..................B44
LCD6-38D-L ..................B44
LCD8-10A-L...................B44
LCD8-14A-L...................B44
LCD8-14B-L...................B44
LCD8-14D-L ..................B44
LCDX1-14A-X................B52
LCDX1-38D-X................B52
LCDX1/0-38D-X.............B52
LCDX2-14A-E................B52
LCDX2-14B-E................B52
LCDX2-14D-E................B52
LCDX2-38D-E................B52
LCDX2/0-14B-X.............B52
LCDX2/0-38D-X.............B52
LCDX250-12-X ..............B52
LCDX250-38D-X............B52
LCDX3/0-12-X ...............B52
LCDX3/0-38D-X.............B52
LCDX300-12-6 . . . . . . .B52
LCDX4-14A-L ................B52
LCDX4-14B-L ................B52
LCDX4-14D-L ................B52
LCDX4-38D-L ................B52
LCDX4/0-38D-X.............B52
LCDX6-10A-L ................B52
LCDX6-14A-L ................B52
LCDX6-14B-L ................B52
LCDX6-14D-L ................B52
LCDX6-38D-L ................B52
LCDX600-12-6...............B52
LCDX750-12-3...............B52
LCDX8-10A-L ................B52
LCDX8-14A-L ................B52
LCDX8-14B-L ................B52
LCDX8-14D-L ................B52

For service and technical support, call 800-777-3300
or visit www.panduit.com.

Index

LCC600-12-6 .................B45
LCC750-12-6 .................B45
LCC8-14A-L...................B45
LCCX1-14A-X................B53
LCCX1/0-12-X ...............B53
LCCX2-12-E ..................B53
LCCX2-38D-E................B53
LCCX2/0-12-X ...............B53
LCCX2/0-38D-X.............B53
LCCX350-12-6...............B53
LCCX4-14A-L ................B53
LCCX4/0-12-X ...............B53
LCCX500-12-6...............B53
LCCX6-14A-L ................B53
LCCX6-14B-L ................B53
LCCX6-38D-L ................B53
LCCX8-14A-L ................B53
LCD1-14A-E ..................B44
LCD1-38D-E ..................B44
LCD1/0-38D-X ...............B44
LCD2-14A-Q..................B44
LCD2-14B-Q..................B44
LCD2-14D-Q..................B44
LCD2-38D-Q..................B44
LCD2/0-14B-X ...............B44
LCD2/0-38D-X ...............B44
LCD250-38D-X . . . . . . .B44
LCD3/0-38D-X ...............B44
LCD4-14A-L...................B44
LCD4-14B-L...................B44
LCD4-14D-L ..................B44
LCD4-38D-L ..................B44
LCD4/0-38D-X ...............B44
LCD6-10A-L...................B44
LCD6-14A-L...................B44
LCD6-14B-L...................B44

PANDUIT
Part
Number

D7

Part Number Index
PANDUIT
Part
Number

Page
No.

Index

P
P10-10F-L......................A26
P10-10LF-L....................A27
P10-10R-L .....................A24
P10-14R-L .....................A24
P10-38R-L .....................A24
P10-6F-L........................A26
P10-6R-L .......................A24
P10-8F-L........................A26
P10-8R-L .......................A24
P10-56R-L .....................A24
P10-P55-L .....................A28
P14-10F-C .....................A26
P14-10R-C.....................A24
P14-14R-C.....................A24
P14-38R-C.....................A24
P14-56R-C.....................A24
P14-6F-C .......................A26
P14-6LF-C .....................A27
P14-6R-C.......................A24
P14-8F-C .......................A26
P14-8R-C.......................A24
P14-P47-C.....................A28
P18-10F-C .....................A26
P18-10R-C.....................A24
P18-14R-C.....................A24
P18-6F-C .......................A26
P18-6FN-C ....................A26
P18-6LF-C .....................A27
P18-6R-C.......................A24
P18-8F-C .......................A26
P18-8R-C.......................A24
P18-P47-C.....................A28
P22-4F-C .......................A26
PG-1 ..............................B37

PANDUIT
Part
Number

Page
No.

PG-1SC .........................B37
PS12-L...........................A42
PS16-C ..........................A42
PS2-Q............................B47
PS4/0-X .........................B47
PS6-L.............................B47
PS8-L.............................B47
PSN16-C .......................A42
PSN18-C .......................A42
PV10-10F-L ...................A25
PV10-10LF-L .................A27
PV10-10R-L...................A22
PV10-10RX-L ................A23
PV10-14F-L ...................A25
PV10-14LF-L .................A27
PV10-14R-L...................A22
PV10-14RX-L ................A23
PV10-38R-L...................A22
PV10-56R-L...................A22
PV10-610R-L.................A23
PV10-6F-L .....................A25
PV10-6LF-L ...................A27
PV10-6R-L.....................A22
PV10-8F-L .....................A25
PV10-8LF-L ...................A27
PV10-8R-L.....................A22
PV10-P55-L ...................A28
PV14-10F-C...................A25
PV14-10LF-C.................A27
PV14-10FN-C ................A25
PV14-10R-C ..................A22
PV14-10RX-C................A23
PV14-14F-C...................A25
PV14-14R-C ..................A22
PV14-38R-L...................A22
PV14-4R-C ....................A22

Order number of pieces required, in multiples of Standard Package Quantity.

D8

Part Number Index
PANDUIT
Part
Number

Page
No.

PV14-56R-C ..................A22
PV14-610R-C ................A23
PV14-6F-C.....................A25
PV14-6FN-C ..................A25
PV14-6LF-C...................A27
PV14-6R-C ....................A22
PV14-6RN-C..................A22
PV14-8F-C.....................A25
PV14-8LF-C...................A27
PV14-8R-C ....................A22
PV14-P47-C ..................A28
PV18-10F-CY ................A25
PV18-10LF-CY ..............A27
PV18-10R-CY................A22
PV18-14R-CY................A22
PV18-38R-CY................A22
PV18-4R-CY..................A22
PV18-56R-CY................A22
PV18-610R-CY..............A23
PV18-6F-CY ..................A25
PV18-6FN-CY................A25
PV18-6LF-CY ................A27
PV18-6R-CY..................A22
PV18-8F-CY ..................A25
PV18-8LF-CY ................A27
PV18-8R-CY..................A22
PV18-P47-CY ................A28
PV22-6F-C.....................A25

PANDUIT
Part
Number

Page
No.
S

SCL1-E ..........................B47
SCL1/0-X .......................B47
SCL2-Q..........................B47
SCL2/0-X .......................B47
SCL250-X ......................B47
SCL3/0-X .......................B47
SCL350-X ......................B47
SCL4-L ..........................B47
SCL4/0-X .......................B47
SCL500-6 ......................B47
SCL6-L ..........................B47
SCL600-6 ......................B47
SCL8-L ..........................B47
SCS1-E..........................B46
SCS1/0-X.......................B46
SCS2-Q .........................B46
SCS2/0-X.......................B46
SCS250-X......................B46
SCS3/0-X.......................B46
SCS350-X......................B46
SCS4-L ..........................B46
SCS4/0-X.......................B46
SCS500-6 ......................B46
SCS6-L ..........................B46
SCS8-L ..........................B46

Index

For service and technical support, call 800-777-3300
or visit www.panduit.com.

D9

PANDUIT is a global leader in cabling and communication
products, delivering end-to-end solutions in support
of demanding electrical and networking requirements.

PANDUIT Catalogs

Electrical Solutions
SA-ELCB03
Cable Ties
Cable Accessories
Stainless Steel
Wiring Duct
Surface Raceway
Abrasion Protection
Cable Management
Terminals

Power and Grounding
Connectors
Labeling System
Labels
Pre-Printed &
Write-On Markers
Lockout/Tagout and
Safety Solutions

Network Connectivity
SA-NCCB34
Cable
Modules

Racks &
Cable Management

Work Area
Outlet Solutions

Grounding & Bonding
Wireless Solutions

Surface Raceway

Managed System
Solutions

Zone Cabling
Patch Panels,
Copper Patch Cords
& Punchdowns

Industrial
Labeling & Administration

Wiring Duct
Fiber Connectors,
Cable Ties & Accessories
Enclosures & Patch Cords
Fiber Routing Systems



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2006:06:23 10:33:26-05:00
Modify Date                     : 2012:02:14 12:36:27+05:30
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Metadata Date                   : 2012:02:14 12:36:27+05:30
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:9fce49bd-b2ac-42bd-9a5f-174ce8038ff6
Instance ID                     : uuid:e9e56c9a-a025-4478-8def-31a102236f52
Page Count                      : 124

EXIF Metadata provided by EXIF.tools