BAR LIGHTS ( BA2 AND BA3) Installation Directions

2014-09-27

: Pdf 109744-Installationsheet 109744-InstallationSheet 790576 Batch8 unilog

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadBAR LIGHTS ( BA2 AND BA3)  Installation Directions
Open PDF In BrowserView PDF
Instructions:

Quick Connect Canopies
Models : QMP-1RN-TR & QMP-1SQ-TR

CAUTION:
Always turn off power at fuse box prior to installation to prevent electrical shock.
For installation by a qualified electrician.
Overview:
Junction box
QMP Canopies are designed to fit all WAC quick connect
fixtures and pendants (50 watts max). They may also be used
on other manufacturers brand of quick connect (consult factory
Screw
for compatibility). This canopy mounts to a standard 4”
junction box, or directly to a surface (use conduit & junction
box where required by code). Power is supplied by a remote
Base plate
12 or 24-volt transformer (sold separately).
Installation:
Quick connect fitting
1. Cut out:4 1/8”
2. Consult voltage drop guidelines below to determine
Canopy
distance and wire gauge sizes.
3. Remove the metal ring and separate the canopy from
Base plate.
Metal ring
4. Guide the secondary wires from the transformer through
the knock out in the junction box.
5. Connect fixture wires to transformer secondary wires,
with wire nuts (supplied).
Note: Do not connect to 120 volt building wires. Wires in
Quick connect post
the junction box are fed from a remote transformer.
6. Attach the base plate to the junction box using two
screws (supplied).
7. If attaching to a flat surface, drill a 1 ¼” center hole to
allow clearance for wire assembly. Hold base plate
against the surface and mark positions of the canopy
screws, drill 3/16” holes. Use wood or other suitable
screws to affix base plate to surface through other
Shown with the
available holes or slots.
QF-194 fixture
8. Mount the canopy to the surface, and tighten the metal
(Not included)
ring to the quick connect fitting.
9. Install Quick Connect fixture or pendant by inserting
quick connect post into fitting and threading clockwise
until snug.
Retain instructions for future reference.
VOLTAGE DROP GUIDELINE/ Transformer to canopy distance
WIRE SIZE
35 W
50 W
18 GAUGE
8 FT
8 FT
16 GAUGE
12 FT
12 FT
14 GAUGE
16 FT
16 FT
12 GAUGE
20 FT
20 FT
Data based on 5% voltage drop
Retain these instructions for future service and adjustments
615 South Street, Garden City, NY 11530
Tel: (516) 515-5000 Fax (516) 515-5050
www.waclighting.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : W.A.C. Lighting Company
Company                         : W.A.C. Lighting Company
Create Date                     : 2011:11:16 12:43:37+08:00
Modify Date                     : 2011:11:16 12:43:39+08:00
Source Modified                 : D:20111109071312
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2011:11:16 12:43:39+08:00
Creator Tool                    : Acrobat PDFMaker 9.0 Word 版
Document ID                     : uuid:116a20be-0983-48fa-b7d7-5f8b69bb2c3d
Instance ID                     : uuid:8b904630-b0a3-408a-960f-edeab4c19d3c
Subject                         : 2
Format                          : application/pdf
Title                           : BAR LIGHTS (MODEL BA2 AND BA3)
Creator                         : W.A.C. Lighting Company
Producer                        : Adobe PDF Library 9.0
Page Layout                     : OneColumn
Page Count                      : 1
EXIF Metadata provided by EXIF.tools

Navigation menu