Ifm General Catalogue English 2012 111220 Catalog
2014-09-27
: Pdf 111220-Catalog 111220-Catalog 006828 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 648
| Download | |
| Open PDF In Browser | View PDF |
2012 fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems visit our website: ifm electronic gmbh Friedrichstraße 1 45128 Essen Tel. +49 / 201 / 24 22-0 Fax +49 / 201 / 24 22-1200 E-Mail: info@ifm.com Cert no. IMO-COC-027827 Over 70 locations worldwide – at a glance at www.ifm.com ifm article no. 7511459 We reserve the right to make technical alterations without prior notice. Printed in Germany on non-chlorine bleached paper. 10/11 www.ifm.com ifm – the company 6- 7 General information 8- 9 Standards and approvals / list of articles 10 - 48 Sensors for special applications 50 - 52 Inductive sensors 54 - 135 Capacitive sensors 136 - 153 Touch sensors 154 - 155 Magnetic sensors 158 - 165 Cylinder sensors 166 - 184 Valve sensors 186 - 199 Photoelectric sensors 200 - 318 Object recognition 320 - 330 Encoders 332 - 345 Evaluation systems 346 - 358 Evaluation systems for safety and EX 360 - 368 Level sensors 370 - 387 Flow sensors 388 - 415 Pressure sensors 416 - 450 Temperature sensors 452 - 473 Diagnostic systems 474 - 481 Bus system AS-interface 482 - 512 Identification systems 514 - 528 Control systems for mobile vehicles 530 - 559 Power supplies 560 - 569 Connection technology 570 - 644 ifm – worldwide addresses 646 - 647 ifm – the company The company in your vicinity. State-of-the-art communication. With the right address – www.ifm.com – only a mouse click separates you from the world of automation technology. See the power of our products in interactive representations. Gain an impression with 3-dimension-al views of our units. Download CAD drawings for direct integration in your applications. Or order online in ifm’s e-shop - fast, convenient and reliable. We are there for you. Close contact with our customers is part of our success. Therefore we have consistently developed our sales network right from the start. Today ifm electronic is represented in more than 70 countries – close to you! With application advice and service at the heart of our operation. For the introduction of new products and technologies we support you with workshops and seminars in our training centres or in your plant. Security by success. Since its foundation in 1969 ifm electronic has constantly grown, now having more than 4300 employees worldwide, and achieved a turnover of more than EUR 470 million in 2010. This success gives you the security of having a reliable partner for the implementation of your automation projects. Comprehensive service and a warranty of up to 5 years on standard units are just two examples of this reliability. Turnover development since 1970. sales development in million EUR 500 6 400 300 200 100 0 1970 1980 1990 2000 2010 ifm – the company A sign of innovation. Not only components. ifm stands for a large range of different sensors and systems for automation. Our range of of more than 7,800 articles guarantees flexibility and compatibility. So there is always a reliable solution for your automation projects – from the individual sensor with practical accessories to the complete system. Availability guaranteed. Your deadlines matter to us. That is why we are constantly optimising our production processes in order to be able to quickly and flexibly produce large quantities at a constantly high quality – and to continue to shorten delivery times. Your order is dispatched via our centralised logistics centre reliably and on time. Quality as part of our philosophy. The quality standard of our products is an integral part of our company philosophy. And we guarantee it! So we provide you, the users, with a maximum degree of security: By means of our own production technology, ifm film technology, as well as by means of extensive quality assurance measures such as 100 % final testing. By quality we understand, for example, ecologically conscious production – Made in Germany! branch office trade partner The development of innovative products is one of our core competences. Under the name of i-step we have come up with a new product generation which implements sophisticated technologies in industrially compatible and easy to handle products. From high-quality standard solutions to products specially tailored to the requirements of the individual industries – from mobile machines to the food industry. 7 General information www.ifm.com Information around the clock and around the globe in 23 languages on the internet. • Information • Selection - product innovations - company news - exhibition info - locations - jobs - interactive product selection aids - configuration tools - data sheet direct • Documentation - data sheets - operating instructions - manuals - approvals - CAD data • Animation - virtual product animations - flash movies (video sequences) • Application - applications - product recommendations - calculation aids • Communication* • Transaction* - request for documents - recall service - live advice - newsletter - e-shop processing - e-procurement catalogues - B2B services *Some offered information is available country-specific Product selectors and further information can be found at: www.ifm.com 8 General information Convenient order processing via the e-shop** on the internet. Secured authentication Individual order history Customer-related price indication Convenient quick input form Real time availability check Simple order processing Personal product favourites Management of shipping addresses Online parcel tracking Confirmations by e-mail ** Already available in many countries. Product selectors and further information can be found at: www.ifm.com 9 Standards and approvals / list of articles 3A 3A Sanitary Standards, Inc. (3-A SSI) is an independent, not-for-profit corporation dedicated to advancing hygienic equipment design for the food, beverage, and pharmaceutical industries. AS-i Actuator-Sensor Interface. Bus system for the first binary field level. ATEX Atmosphère Explosible. ATEX comprises the directives of the European Union in the field of explosion protection. On the one hand there is the 94/9/EC ATEX product directive and on the other hand the 1999/92/EC ATEX operation directive. CCC CCC (China Compulsory Certification) is a compulsory Chinese certification for certain products put on the market in China. Which products are concerned is specified in a catalogue created by the Chinese authorities. cCSAus Testing a product by CSA according to the safety standards applicable in Canada and the USA. CE Conformité Européenne. By affixing the CE marking to a product, the manufacturer declares that it meets EU safety, health and environmental requirements. cRUus Testing components by UL according to the safety standards applicable in Canada and the USA. Components can be used when the “condition of acceptability“ is complied with for the final product. CSA Canadian Standards Association. A non-governmental Canadian organisation that sets standards and tests and certifies products for their reliability. By now it is active worldwide. cULus Testing components by UL according to the safety standards applicable in Canada and the USA. DIBt (WHG) Deutsches Institut für Bautechnik (Federal Water Act). The Federal Water Act (WHG) is the essential part of the German law relating to water . It contains provisions for the protection and use of surface water and ground water and also regulations about the expansion of waters, water planning and flood protection. e1 Approval by the Kraftfahrt-Bundesamt (German Federal Motor Transport Authority). The e1 type approval by the German Federal Motor Transport Authority certifies that the units comply with the automotive standards. Units with this marking are allowed to be mounted on vehicles without expiry of their operating permit. EHEDG European Hygienic Engineering & Design Group. European supervisory authority for food and drugs. This authority grants approvals for products and materials used in the food and pharmaceutical industries. FDA Food and Drug Administration. US-American supervisory authority for food and drugs. This authority grants approvals for products and materials used in the food and pharmaceutical industries. Product selectors and further information can be found at: www.ifm.com 10 Standards and approvals / list of articles FM Factory Mutual Research. A US-based insurance company that specializes in loss prevention services in the property insurance market sector. They provide material research, material testing and certifications in the field of fire and explosion protection. PROFIBUS Process Field Bus. Fieldbus system for important data quantities. It is available in several versions such as Profibus FMS, DP or PA. Profibus DP can be used over longer distances, e.g. as fieldbus for AS-i. TÜV Technischer Überwachungs Verein (technical inspection association). The German TÜV is a private-sector body carrying out technical safety tests that are stipulated by government laws or instructions. UL Underwriters Laboratories. An organisation founded in the USA for testing and certifying products and their safety. Product selectors and further information can be found at: www.ifm.com 11 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page AC0017 CE 192 AC1332 CE, CUL 484 AC0019 CE 192 AC1337 CE, CUL 484 484 AC001S CE, CUL 494 AC1353 CE, CUL AC0020 CE 192 AC1354 CE, CUL 484 AC0021 CE 192 AC1355 CE, CUL 484 AC0022 CE 192 AC1356 CE, CUL 484 AC0023 CE 192 AC1365 CE, CUL 484 AC002S CE, CUL 494 AC1366 CE, CUL 484 484 AC003S CE, CUL 494 AC1375 CE, CUL AC004S CE, CUL 494 AC1376 CE, CUL 484 AC005S CE, CUL 494 AC1401 CE, CUL, Profinet 484 AC006S CE 494 AC1402 CE, CUL, Profinet 484 AC007S CE, CUL 494 AC2032 CE 490 AC009S CE, CRUUS 494 AC2035 CE 490 AC010S CE, CUL 494 AC2055 CE, CUL 493 AC0115 CE 502 AC2057 CE 493 AC0116 CE 502 AC2086 CE 488 AC011S CE, CUL 494 AC2087 CE 488 488 AC012S CE, CUL 494 AC2088 CE AC015S CE, CRUUS 495 AC2211 CE 486 AC016S CE, CUL 495 AC2212 CE 486 AC030S CE, CUL 494 AC2216 CE, CUL 487 AC031S CE, CUL 494 AC2217 CE, CUL 487 AC032S CE, CUL 494 AC2218 CE, CUL 487 487 485 AC2219 CE, CUL AC1145 AC0340 CE 485 AC2220 CE, CUL 487 AC1146 CE 485 AC2225 CE 485 AC1147 CE 485 AC2250 CE, CRUUS 486 493 AC2251 CE, CRUUS 486 AC1150 AC1151 CE 493 AC2252 CE, CRUUS 486 AC1154 CE 499 AC2254 CE, CRUUS 486 AC115S 502 AC2255 CE, CRUUS 486 AC116S 502 AC2256 CE, CRUUS 486 AC1207 CE, CUL 485, 564 AC2257 CE, CRUUS 486 AC1209 CE, CUL 485, 564 AC2258 CE, CRUUS 486 AC1212 CE, CUL 485, 565 AC2259 CE, CRUUS 487 AC1216 CE, CRUUS 485, 564 AC2264 CE, CRUUS 486 AC1218 CE, CRUUS 485, 565 AC2267 CE, CRUUS 486 AC1220 CE, CRUUS, CUL 564 AC2310 CE, CUL 493 AC1221 CE, CRUUS, CUL 564 AC2315 CE, CUL 189, 493 AC1223 CE 486, 565 AC2316 CE, CUL 189, 493 AC1224 CE, CRUUS 485, 564 AC2317 CE, CUL 189, 493 AC1226 CE, CRUUS 485, 564 AC2410 CE, CUL 490 AC1236 CE, CRUUS, CUL 564 AC2411 CE, CUL 490 AC1244 CE, CRUUS, CUL 564 AC2412 CE, CUL 490 AC1250 CE, CRUUS 485 AC2413 CE, CUL 489 AC1318 CE, CUL 484 AC2417 CE, CUL 490 AC1324 CE, CUL 484 AC2451 CE, CUL 490 AC1327 CE, CUL 484 AC2452 CE, CUL 490 AC1331 CE, CUL 484 AC2457 CE, CUL 490 Product selectors and further information can be found at: www.ifm.com 12 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page AC2458 CE, CUL AC2459 CE, CUL 490 AC514A CE 489 490 AC515A CE 489 487 AC2464 CE, CUL 490 AC5200 CE, CUL AC2465 CE, CUL 490 AC5203 CE, CUL 487 AC2466 CE, CUL 490 AC5204 CE, CUL 488 AC246A CE 493 AC5205 CE, CUL 487 AC2480 CE 490 AC5208 CE, CUL 487 AC2516 CE 488 AC5209 CE, CUL 488 488 AC2517 CE 488 AC5210 CE, CUL AC2518 CE 488 AC5211 CE, CUL 488 AC2519 CE 488 AC5212 CE, CUL 488 AC2520 CE 488 AC5213 CE, CUL 488 AC2616 CE 491 AC5214 CE, CUL 488 AC2617 CE 491 AC5215 CE, CUL 487 AC2618 CE 491 AC5222 CE, CUL 489 AC2619 CE 491 AC5223 CE, CUL 489 AC2620 CE 491 AC5224 CE, CUL 489 AC2709 CE, CRUUS 487 AC5225 CE, CUL 489 492 AC2729 CE, CRUUS 487 AC5227 CE AC2731 CE 487 AC5228 CE 492 AC2739 CE, CRUUS 487 AC522A CE 489 AC2900 CE, CUL 491 AC5230 CE, CUL 489 AC2904 CE, CUL 491 AC5235 CE, CUL 488 AC2910 CE, CUL 491 AC5236 CE, CUL 488 AC2916 CE, CUL 491 AC5243 CE 492 499 AC5245 CE, CUL 489 191, 493 AC5246 CE 492 AC3000 AC315A CE AC316A CE 190, 493 AC5249 CE 492 AC317A CE 190, 493 AC5251 CE 492 AC326A CE, (CCC) 191 AC5253 CE 492 AC4000 CE 499 AC5270 CE 492 AC4001 499 AC5271 CE 492 AC4002 CE 499 AC5274 CE, CUL 489 AC4003 CSA, UL 499 AC5275 CE, CUL 489 AC4004 CSA, UL 493 500 AC528A CE AC4006 499 AC5292 CE, CUL 489 AC4007 500 AC535A CE 489 AC4008 500 AC542A CE 493 AC5000 CUL 491 AC546A CE 493 AC5003 CUL 492 AC551A CE 493 497 AC570A CE 493 AC5005 AC5007 499 ANT805 526 AC5010 CUL 492 ANT810 526 AC5011 CUL 492 ANT820 526 AC5014 CUL 492 ANT830 526 AC5015 492 ANT910 526 AC5031 492, 499 ANT930 526 536 AC505A CE 489 CP9006 AC507A CE 489 CP9008 AC508A CE 489 CR0020 536 CE, E1 534 (CCC) = CCC approval is not required 13 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page CR0032 CE, E1 535 DD0022 CE 351 CR0200 CE, E1 535 DD0116 CE, CUL 351 CR0232 CE, E1 535 DD0122 CE, CUL 351 CR0301 CE, E1 536 DD2001 CE 348 CR0302 CE, E1 536 DD2002 CE 348 CR0303 CE, E1 536 DD2003 CE, CUL 348 CR0401 CE, E1 533 DD2004 CE, CUL 348 CR0403 CE, E1 533 DD2005 CE, CUL 348 CR0421 CE, E1 534 DD2006 CE, CUL 348 CR0451 CE, E1 534 DD2103 CE, CUL 348 CR0505 CE, E1 534 DD2105 CE, CUL 349 CR1050 CE, E1 538 DI0001 CE 352 CR1051 CE, E1 538 DI0002 CE 352 CR1052 CE, E1 538 DI0004 CE 352 CR1053 CE, E1 538 DI001A CE 353 CR1055 CE, E1 538 DI002A CE 353 CR1056 CE, E1 538 DI5001 CE 352 CR1070 CE, E1 537 DI5003 CE 352 CR1071 CE, E1 537 DI5004 CE 352 CR1080 CE, E1 538 DI5005 CE 352 CR1081 CE, E1 538 DI5007 CE 352 CR1500 CE 537 DI5009 CE 353 CR2011 CE 536 DI5011 CE 352 CR2012 CE, E1 537 DI501A CE 353 CR2013 CE 536 DI502A CE 353 CR2014 CE, E1 537 DI503A CE 353 CR2016 CE, E1 537 DI6001 CE, CUL 352 CR2031 CE, E1 536 DI601A CE 353 CR2032 CE, E1 536 DL2003 CE, CUL 354 CR2033 CE, E1 537 DN0001 CE 562 CR2101 CE 539 DN0012 CE 562 CR2102 CE, E1 539 DN0200 CE 562 CR2500 CE, E1 535 DN1022 CE, CUL 563 CR2512 CE, E1 537 DN1030 CE, CRUUS, CUL 562 CR2513 CE, E1 537 DN1031 CE, CRUUS, CUL 562 CR3001 CE 545 DN2013 CE, CUL 563 CR3002 CE 545 DN2014 CE, CUL 563 CR3003 CE 545 DN2021 CE 563 CR3004 CE 545 DN2032 CE, CUL 563 CR3101 CE 539 DN2033 CE, CUL 563 CR3105 CE 539 DN2034 CE, CUL 563 CR3106 CE 539 DN2035 CE, CUL 563 CR7021 CE, E1 535 DN2036 CE, CUL 563 CR7201 CE, E1 535 DN2112 CE 563 CR7506 CE, E1 535 DN2114 CE, CUL 563 DA0001 CE 351 DN2134 CE, CUL 563 DA0116 CE, CUL 351 DN3011 CE, CRUUS, CUL 562 DA0122 CE, CUL 351 DN3012 CE, CRUUS, CUL 562 DA101S CE, TuevNord 351 DR2003 CE, CUL 350 DD0001 CE 350 DR2005 CE, CUL 350 Product selectors and further information can be found at: www.ifm.com 14 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page DS2001 CE 349 E10661 193 DS2003 CE, CUL 349 E10730 112, 501 DS2005 CE, CUL 349 E10734 110, 163 DS2006 CE, CUL 349 E10735 111, 147 DS2103 CE, CUL 349 E10736 111, 147 DS2105 CE, CUL 350 E10737 112, 147 DT0001 CE 562 E10741 111 DTA100 CE, CUL 496, 524 E10742 111 DTA101 CE, CUL 496, 524 E10743 112 DTA200 CE, CUL 496, 524 E10749 164 DTA201 CE, CUL 496, 524 E10750 164 DTA300 CE, CUL 496, 524 E10751 164 DTA301 CE, CUL 524 E10752 164 DTE800 CE 526 E10753 164 DTE900 CE 526 E10754 164 DW2003 CE, CUL 350 E10802 498 DW2004 CE, CUL 350 E10803 498 DX2001 CE 354 E10806 111 DX2002 CE 354 E10807 112 DX2003 CE 354 E10808 112 DX2011 CE 354 E10848 110 DX2012 CE 355 E10849 110 E10013 577 E10865 574 E10014 110 E10866 574 E10015 111 E10867 574 E10016 110 E10868 574 E10017 110, 147 E10880 147 E10058 580 E10886 579 E10076 111, 147 E10887 578 E10077 112, 147 E10976 576 E10136 574 E10977 576 E10137 577 E11027 146 E10154 110 E11030 146 E10155 110 E11032 146 E10189 579 E11034 146 E10190 579 E11036 146 E10191 579 E11037 147 E10192 110 E11043 580 E10193 110, 147 E11047 111, 163 E10200 579 E11048 111, 163 E10204 110 E11049 112, 551 E10221 110, 163 E11078 147 E10261 579 E11114 111 E10437 598 E11115 112 E10447 342, 578 E11214 597 E10448 343, 578 E11215 597 E10579 194 E11216 597 E10584 194 E11217 597 E10585 194 E11218 598 E10597 195 E11219 598 (CCC) = CCC approval is not required 15 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page E11226 577 E11534 111 E11227 577 E11550 580 E11231 328, 576 E11551 581 E11232 328, 576 E11552 572 E11243 195 E11553 573 E11248 CRUUS 579 E11569 364 E11249 CRUUS 579 E11572 476 E11250 CRUUS 579 E11589 548 E11251 CRUUS 579 E11591 548 E11278 193 E11592 548 E11310 195 E11593 548 E11311 328, 576 E11594 548 E11416 595 E11596 548 E11417 595 E11597 548 E11418 595 E11598 548 E11419 595 E11599 548 E11420 595 E11645 577 E11421 595 E11664 476 E11422 596 E11697 577 E11423 596 E11736 578 E11424 596 E11737 578 E11425 596 E11738 578 E11426 596 E11739 577 E11427 596 E11740 577 E11428 596 E11741 578 E11429 596 E11742 578 E11430 597 E11743 578 E11431 596 E11744 578 E11432 596 E11745 578 E11433 596 E11746 578 E11434 596 E11747 578 E11435 596 E11775 601 E11436 597 E11796 179 E11437 597 E11797 178 E11438 597 E11798 180 E11439 597 E11799 178 E11440 597 E11801 178 E11504 CRUUS 581 E11803 164 E11505 CRUUS 581 E11807 328, 576 E11506 CRUUS 582 E11816 176 E11507 CRUUS 582 E11817 176 E11508 CRUUS 574 E11818 177 E11509 CRUUS 574 E11819 177 574 E11820 177 E11510 E11511 CRUUS 575 E11821 177 E11512 CRUUS 575 E11822 177 E11521 110 E11823 177 E11530 109 E11846 179 E11531 109 E11847 498 E11533 111 E11857 607 Product selectors and further information can be found at: www.ifm.com 16 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page E11858 607 E12153 147 E11859 609 E12163 147 E11860 608 E12164 179 E11861 607 E12166 576 E11862 607 E12167 576 E11863 607 E12168 576 E11864 608 E12169 576 E11865 608 E12170 195 E11872 180 E12204 328, 520 E11877 179 E12205 328, 520 E11890 180 E12208 194 E11891 180 E12209 194 E11892 179 E12212 194 E11894 179 E12231 178 E11895 180 E12232 178 E11898 328, 520 E12233 178 E11900 195 E12234 179 E11912 179 E12274 261 E11913 179 E17105 193 E11914 180 E17118 193 E11928 180 E17148 193 E11950 328, 576 E17205 193 E11957 179 E17294 193 E11958 178 E17295 194 E11959 178 E17296 194 E11960 178 E17320 193 E11961 178 E17321 193 E11975 177 E17322 193 E11976 177 E17323 193 E11977 177 E17324 193 E11978 177 E17325 193 E11979 177 E17326 193 E11980 177 E17327 194 E11981 177 E17328 194 E11982 177 E17329 194 E11984 195 E17330 194 E11986 343 E17331 194 E11987 343 E19503 112 E11988 179 E1D100 253, 261 E11989 195 E20003 225 E12004 180 E20004 225 E12009 195 E20005 226 E12010 195 E20051 270 E12015 178 E20052 270 E12017 178 E20053 271 E12042 195 E20054 270 E12043 195 E20055 271 E12074 343 E20056 271 E12090 328, 520 E20057 271 E12123 195 E20058 271 (CCC) = CCC approval is not required 17 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page E20059 269 E20689 265 E20060 269 E20711 266 E20061 270 E20712 266 E20062 269 E20714 265 E20078 271 E20715 267 E20102 272 E20716 232 E20103 272 E20717 232 E20104 272 E20718 113, 148 E20105 272 E20719 113, 148 E20106 272 E20720 227, 252 E20107 272 E20721 227, 252 E20127 270 E20722 252, 287 E20128 270 E20724 226 252 E20129 270 E20737 E20130 270 E20738 576 E20211 272 E20744 226, 287 E20215 271 E20748 266 E20228 269 E20749 267 E20230 270 E20750 265 E20249 270 E20751 265 E20353 272 E20752 265 E20428 580 E20753 265 E20430 580 E20754 271 E20452 226 E20755 272 E20453 226 E20756 266 E20454 226 E20757 265 E20489 271 E20758 266 E20492 270 E20762 272 E20493 270 E20765 267 E20494 271 E20767 267 E20495 271 E20772 267 E20505 270 E20773 268 E20506 270 E20774 268 E20507 271 E20775 268 E20590 227 E20788 230 E20593 272 E20789 230 E20600 272 E20792 230 E20603 265 E20793 230 E20606 265 E20796 232 E20609 265 E20811 113, 148 E20612 265 E20813 112, 113 E20615 265 E20814 113 E20633 266 E20838 576 E20639 266 E20843 232 E20645 266 E20844 232 E20648 266 E20856 113 E20651 266 E20857 113 E20654 266 E20860 113 E20679 271 E20861 113 E20680 271 E20864 113 Product selectors and further information can be found at: www.ifm.com 18 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page E20865 113 E21076 325, 520 E20866 113, 148 E21079 253, 261 E20867 113, 148 E21081 232, 254 E20869 113, 148 E21083 230 E20870 114, 148 E21084 230 E20873 114, 148 E21085 229, 287 E20874 114, 148 E21086 229, 288 E20875 114, 148 E21087 229, 287 E20877 231 E21088 229, 231 E20901 525 E21095 229, 253 E20903 226 E21101 266 E20907 226 E21102 266 E20911 226 E21103 265 E20914 226 E21104 266 E20915 226 E21105 267 E20938 232, 254 E21106 267 E20939 325, 327 E21107 267 E20940 232, 254 E21109 325, 519 E20941 325, 520 E21110 232, 325 E20946 325, 519 E21111 325 E20948 325, 519 E21112 325, 519 E20950 233 E21113 325, 519 E20951 233, 254 E21114 230 E20952 326 E21115 226 E20953 225 E21116 231 E20954 225 E21117 231 E20956 225 E21118 231 E20964 228 E21119 231 E20965 228 E21120 231 E20966 229 E21122 229, 231 E20968 229 E21125 233 E20969 229 E21126 233 E20970 229, 253 E21133 253, 261 E20973 229, 253 E21135 328 E20974 228, 253 E21136 328 E20975 253 E21137 328, 547 E20976 253 E21138 328, 547 E20984 228 E21139 328, 548 E20988 252 E21140 329 E20989 252 E21142 230 E20990 251 E21144 227 E20991 252 E21145 227 E20992 251 E21159 253, 260 E20993 251 E21165 326, 520 E20994 252 E21166 326, 520 326, 520 E21007 226 E21168 E21012 230 E21169 520 E21015 226 E21171 254, 261 E21056 228 E21172 326 E21057 228 E21200 227 (CCC) = CCC approval is not required 19 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals E21201 227 E30009 442 E21202 227 E30010 439 EHEDG Catalogue page E21203 227 E30013 E21204 232, 254 E30016 465 442 E21205 232 E30017 465 E21206 227, 252 E30018 465 E21207 227, 252 E30024 465 E21208 232, 254 E30025 465 E21209 232, 254 E30047 465 E21210 230, 287 E30049 465 E21211 230, 288 E30050 E21212 230, 288 E30052 FDA 442 E21213 233, 288 E30055 EHEDG 382, 468 233, 288 E30056 EHEDG 382, 468 231 E30057 439 E21216 231 E30058 439 E21217 231 E30059 439 E21218 231 E30063 439 E21219 252 E30064 442 E21220 252 E30065 439 E21221 229, 253 E30070 442 E21222 229, 253 E30071 442 E21223 230, 287 E30072 442 E21228 327 E30073 465 E21229 327 E30076 438 E21232 327 E30077 438 228 E30078 437, 463 E21214 E21215 E21237 CUL CE E21238 CE 228 E30079 E21239 CE 228 E30080 E21240 CE 439 437, 463 CE 476 228 E30091 464 E21248 261 E30094 438, 466 E2D106 326 E30098 476 E2D107 324 E30101 437 E2D108 325 E30104 437 465 E2D109 325 E30107 E2D110 324, 519 E30108 465 E2D112 324, 519 E30112 329, 478 E2D200 324 E30115 478 E2D400 324, 327 E30116 439 E2D401 324, 327 E30117 E2D402 324, 327 E30122 EHEDG 381, 405 476 439 E2I200 518 E30123 FDA E2I210 518 E30124 FDA E2I211 518 E30128 E2I212 519 E30130 439 441, 467 EHEDG 441 E2I213 519 E30132 E30000 381, 439 E30393 EHEDG 464 E30003 439 E30396 CE 438, 463 CE, CUL 438, 463 E30006 437, 463 E30398 E30007 381, 439 E30399 Product selectors and further information can be found at: www.ifm.com 20 479 381, 438 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. E30400 381, 438 E37340 438 E30401 381, 438 E37350 438 E30402 Approvals Catalogue page 381, 438 E37360 439 E30403 EHEDG 464 E3D103 327 E30405 CE 438, 463 E3D200 327 E30407 465 E3D201 327 E33001 441 E40048 405 E33002 441 E40078 402 E33012 441 E40079 402 E33013 442 E40083 402 EHEDG 442 E40096 403, 466 442 E40097 403, 466 EHEDG, FDA 442 E40098 403, 466 E33022 E33031 E33131 E33201 EHEDG, FDA 382, 404 E40099 403, 466 E33202 EHEDG, FDA 404, 440 E40100 403, 466 E33208 EHEDG, FDA 440 E40101 403, 466 E33209 EHEDG, FDA 440 E40104 403, 466 E33211 EHEDG, FDA 404, 440 E40106 403 E33212 EHEDG, FDA 381, 404 E40107 466 E33213 EHEDG, FDA 381, 404 E40114 403, 466 E33221 EHEDG, FDA 404, 440 E40115 403 E33222 EHEDG, FDA 405, 440 E40124 403, 465 E33228 EHEDG, FDA 441 E40128 466 E33229 EHEDG, FDA 441 E40129 403 E33242 FDA 405, 441 E40136 402 E33340 FDA 441 E40138 403 E33401 EHEDG 383, 467 E40148 465 E33402 EHEDG 383, 468 E40151 406 E33430 EHEDG 383, 468 E40153 406 465 E40161 402 E33601 EHEDG 442 E40162 403 E33612 EHEDG 442 E40171 404 E33701 EHEDG, FDA 382, 404 E40178 405 E33702 EHEDG, FDA 404, 440 E40179 406 E33711 EHEDG, FDA 404, 440 E40180 406 E33712 EHEDG, FDA 381, 404 E40189 405 E33713 EHEDG, FDA 381, 404 E40196 406 E33721 EHEDG, FDA 405, 441 E40197 406 E33722 EHEDG, FDA 405, 441 E40198 406 E33431 E33731 EHEDG, FDA 405, 441 E40199 405 E33732 EHEDG, FDA 405, 441 E40203 404 E35010 464 E40205 406 E35020 464 E40213 406 E35030 464 E40214 406 E35050 464 E40215 406 E35110 464 E40216 406 E35220 464 E40217 406 E37010 464 E43000 379 E37020 464 E43001 378 E37030 464 E43002 379 (CCC) = CCC approval is not required 21 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page E43003 378 E43902 146 E43004 378 E43904 146 E43006 378 E43910 379 E43007 378 E60006 342 E43008 378 E60022 341 E43009 378 E60027 341 E43012 378 E60028 341 E43013 379 E60033 340 E43014 378 E60034 340 E43016 379 E60035 340 E43019 378 E60036 340 E43100 379 E60041 340 E43101 379 E60062 341 E43102 379 E60063 341 E43103 379 E60064 341 E43201 379 E60065 341 E43202 379 E60066 341 E43203 379 E60067 341 E43204 380 E60076 342 E43205 380 E60095 342 E43206 379 E60098 342 E43207 380 E60110 342 E43208 380 E60111 342 E43209 380 E60112 342 E43210 380 E60117 341 E43211 380 E60118 341 E43212 380 E60119 341 E43213 380 E60120 341 E43214 380 E60121 341 E43215 380 E60122 343 E43216 380 E60123 343 E43217 380 E60124 343 E43218 380 E60128 343 E43219 380 E60136 343 E43220 381 E60137 342 E43221 381 E60138 342 E43300 EHEDG 382, 468 E60141 343 E43301 EHEDG 382, 468 E60144 343 E43302 EHEDG 382 E60146 343 E43303 EHEDG 382 E60147 343 E43304 EHEDG 382, 468 E60157 343 E43305 EHEDG 382, 468 E60174 342 E43306 EHEDG 382, 468 E60175 342 E43307 EHEDG 383, 468 E60302 340 E43308 EHEDG 383, 468 E7000A 499 E43309 EHEDG 382 E7001S 498 E43310 EHEDG 382 E7002S 498 E43311 EHEDG 383 E7003S 498 E43312 EHEDG 383 E7004S 498 146 E7005S 498 E43900 Product selectors and further information can be found at: www.ifm.com 22 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. E70062 500 E80317 501, 524 E70067 500 E80318 501, 524 501, 525 E7006S CE 498 E80319 E7007S CE 494 E80320 E70096 497 E80321 Approvals Catalogue page 501, 525 CE 501, 525 E70113 500 E80322 E70142 580 E80323 CE 501, 525 E70188 496 E80324 CE 525 E70200 496 E80330 527 E70211 499 E80331 527 E70213 499 E80340 527 496 E80350 526 E70231 496 E80351 526 E70230 CRUUS 501, 525 E70232 496 E89005 E70233 496 E89010 CE 354 E70236 496 E89013 E70271 497 E89150 CE 355 E70297 498 EBC001 CUL 599 E70299 500 EBC002 CUL 599 E70320 499 EBC003 CUL 601 601 356 356 E70354 CUL 491, 497 EBC004 CUL E70377 CUL 491, 497 EBC005 CUL 599 E70381 497 EBC006 CUL 599 E70399 500 EBC007 CUL 601 E7040S 498 EBC008 CUL 601 E70413 500 EBC009 CUL 599 E70423 499 EBC010 CUL 599 E70424 549 EBC011 CUL 601 491, 497 EBC012 CUL 601 E70481 497 EBC013 CUL 598 E70498 497 EBC014 CUL 600 E70499 497 EBC015 CUL 598 E73004 498, 550 EBC016 CUL 600 EBC017 CUL 598 600 E70454 CUL E7354A CE 497 E7377A CE 497 EBC018 CUL E75222 498 EBC019 CUL 598 E75227 500 EBC020 CUL 600 E75228 500 EBC021 CUL 599 E75232 500 EBC022 CUL 600 E79995 497 EBC023 CUL 599 E79998 497 EBC024 CUL 600 E80100 CE 355 EBC025 CUL 598 E80102 CE 355 EBC026 CUL 600 E80110 CE 356 EBC027 CUL 598 E80301 501, 524 EBC028 CUL 600 E80302 501, 524 EBC029 CUL 598 E80304 501, 525 EBC030 CUL 600 E80310 232, 254 EBC031 CUL 598 E80311 501, 524 EBC032 CUL 600 E80312 501, 524 EBC033 CUL 599 (CCC) = CCC approval is not required 23 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals EBC034 CUL 600 EC2080 329, 478 EBC035 CUL 599 EC2081 545 EBC036 CUL 601 EC2082 EC0400 CE, E1 533 EC2083 549 EC0401 533, 534 EC2084 546 EC0402 533 EC2086 546 EC0403 534 EC2088 547 EC0451 533 EC2089 546 CE Catalogue page 539 EC0452 533 EC2090 546 EC0453 533 EC2091 547 EC0456 533 EC2092 550 EC0457 534 EC2093 EC1021 550 EC2095 EC1410 549 EC2096 545 EC1411 549 EC2097 546 EC1412 549 EC2098 549 EC1413 549 EC2099 548 EC1450 549 EC2110 549 550 CE, E1 CE 549 EC1451 549 EC2112 EC1452 549 EC2113 533 533 EC1453 549 EC2114 548 EC1520 546 EC2115 549 EC1521 546 ENC01A 619 EC1522 546 ENC02A 619 EC1523 547 ENC03A 620 EC1524 548 ENC04A 619 EC2013 546 ENC05A 619 EC2015 550 ENC06A 619 EC2016 550 ENC07A 620 EC2019 539 ENC08A 620 EC2025 CE 545 ENC09A 620 EC2032 547 ENC10A 620 EC2034 547 ENC11A 620 EC2036 CE 539 ENC12A 620 EC2045 CE 620 539 ENC13A EC2046 546 ENC14A EC2049 545 EVC001 CRUUS EC2050 547 EVC002 CRUUS 575 EC2053 546 EVC003 CRUUS 575 EC2056 547 EVC004 CRUUS 574 EC2058 547 EVC005 CRUUS 574 EC2059 620 574 550 EVC006 CRUUS 574 EC2060 CE 539 EVC007 CRUUS 575 EC2061 CE 539 EVC008 CRUUS 575 EC2062 547 EVC009 CRUUS 575 EC2063 547 EVC010 CRUUS 592 EC2074 536 EVC011 CRUUS 592 EC2075 546 EVC012 CRUUS 592 EC2076 547 EVC013 CRUUS 592 EC2077 545 EVC014 CRUUS 592 Product selectors and further information can be found at: www.ifm.com 24 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page EVC015 CRUUS 592 EVC063 CRUUS 594 EVC016 CRUUS 592 EVC064 CRUUS 594 EVC017 CRUUS 592 EVC065 CRUUS 595 EVC018 CRUUS 592 EVC066 CRUUS 595 EVC019 CRUUS 592 EVC067 CRUUS 595 EVC020 CRUUS 592 EVC068 CRUUS 595 EVC021 CRUUS 593 EVC069 CRUUS 595 EVC022 CRUUS 593 EVC06A EVC023 CRUUS 593 EVC070 CRUUS EVC024 CRUUS 593 EVC071 CRUUS 575 EVC025 CRUUS 593 EVC072 CRUUS 575 620 575 EVC026 CRUUS 593 EVC073 CRUUS 575 EVC027 CRUUS 593 EVC074 CRUUS 575 EVC028 CRUUS 593 EVC075 CRUUS 575 EVC029 CRUUS 593 EVC076 CRUUS 581 EVC030 CRUUS 593 EVC077 CRUUS 581 EVC031 CRUUS 593 EVC078 CRUUS 581 EVC032 CRUUS 593 EVC079 CRUUS 581 EVC033 CRUUS 593 EVC07A EVC034 CRUUS 593 EVC080 CRUUS 581 EVC035 CRUUS 594 EVC081 CRUUS 581 621 EVC036 CRUUS 594 EVC094 CRUUS 582 EVC037 CRUUS 594 EVC095 CRUUS 581 EVC038 CRUUS 594 EVC09A 621 EVC039 CRUUS 594 EVC10A 621 EVC040 CRUUS 591 EVC11A 621 EVC041 CRUUS 591 EVC12A 621 EVC042 CRUUS 591 EVC13A EVC043 CRUUS 591 EVC141 CRUUS 621 572 EVC044 CRUUS 591 EVC142 CRUUS 572 EVC045 CRUUS 591 EVC143 CRUUS 572 EVC046 CRUUS 591 EVC144 CRUUS 572 EVC047 CRUUS 591 EVC145 CRUUS 572 EVC048 CRUUS 591 EVC146 CRUUS 572 EVC049 CRUUS 591 EVC147 CRUUS 572 620 EVC148 CRUUS 572 591 EVC149 CRUUS 572 EVC04A EVC050 CRUUS EVC051 CRUUS 591 EVC150 CRUUS 572 EVC052 CRUUS 591 EVC151 CRUUS 572 EVC053 CRUUS 592 EVC152 CRUUS 573 EVC054 CRUUS 592 EVC153 CRUUS 573 EVC055 CRUUS 594 EVC154 CRUUS 573 EVC056 CRUUS 594 EVC155 CRUUS 573 EVC057 CRUUS 594 EVC161 CRUUS 573 EVC058 CRUUS 594 EVC162 CRUUS 573 EVC059 CRUUS 595 EVC163 CRUUS 573 620 EVC164 CRUUS 573 EVC05A EVC060 CRUUS 594 EVC165 CRUUS 573 EVC061 CRUUS 594 EVC166 CRUUS 573 EVC062 CRUUS 594 EVC210 CRUUS 587 (CCC) = CCC approval is not required 25 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page EVC211 CRUUS 587 EVC261 CRUUS 584 EVC212 CRUUS 587 EVC262 CRUUS 584 EVC213 CRUUS 587 EVC263 CRUUS 584 EVC214 CRUUS 587 EVC264 CRUUS 584 EVC215 CRUUS 586 EVC265 CRUUS 582 EVC216 CRUUS 586 EVC266 CRUUS 582 EVC217 CRUUS 586 EVC267 CRUUS 582 EVC218 CRUUS 586 EVC268 CRUUS 583 EVC219 CRUUS 586 EVC269 CRUUS 583 EVC220 CRUUS 587 EVC270 CRUUS 584 EVC221 CRUUS 587 EVC271 CRUUS 584 EVC222 CRUUS 587 EVC272 CRUUS 584 EVC223 CRUUS 587 EVC273 CRUUS 584 EVC224 CRUUS 587 EVC274 CRUUS 584 EVC225 CRUUS 586 EVC275 CRUUS 582 EVC226 CRUUS 586 EVC276 CRUUS 582 EVC227 CRUUS 586 EVC277 CRUUS 582 EVC228 CRUUS 586 EVC278 CRUUS 582 EVC229 CRUUS 586 EVC279 CRUUS 582 EVC230 CRUUS 585 EVC280 CRUUS 583 EVC231 CRUUS 585 EVC281 CRUUS 583 EVC232 CRUUS 586 EVC282 CRUUS 583 EVC233 CRUUS 586 EVC283 CRUUS 583 EVC234 CRUUS 586 EVC284 CRUUS 583 EVC235 CRUUS 587 EVC285 CRUUS 589 EVC236 CRUUS 587 EVC286 CRUUS 589 EVC237 CRUUS 587 EVC287 CRUUS 589 EVC238 CRUUS 587 EVC288 CRUUS 589 EVC239 CRUUS 588 EVC289 CRUUS 590 EVC240 CRUUS 588 EVC290 CRUUS 590 EVC241 CRUUS 588 EVC291 CRUUS 590 EVC242 CRUUS 588 EVC292 CRUUS 590 EVC243 CRUUS 588 EVC293 CRUUS 590 EVC244 CRUUS 588 EVC294 CRUUS 590 EVC245 CRUUS 588 EVC295 CRUUS 590 EVC246 CRUUS 588 EVC296 CRUUS 590 EVC247 CRUUS 588 EVC297 CRUUS 590 EVC248 CRUUS 588 EVC298 CRUUS 590 EVC249 CRUUS 588 EVC299 CRUUS 590 EVC250 CRUUS 589 EVC300 CRUUS 585 EVC251 CRUUS 589 EVC301 CRUUS 585 EVC252 CRUUS 589 EVC302 CRUUS 585 EVC253 CRUUS 589 EVC303 CRUUS 585 EVC254 CRUUS 589 EVC304 CRUUS 585 EVC255 CRUUS 588 EVC305 CRUUS 583 EVC256 CRUUS 589 EVC306 CRUUS 583 EVC257 CRUUS 589 EVC307 CRUUS 583 EVC258 CRUUS 589 EVC308 CRUUS 583 EVC259 CRUUS 589 EVC309 CRUUS 583 EVC260 CRUUS 584 EVC310 CRUUS 585 Product selectors and further information can be found at: www.ifm.com 26 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page EVC311 CRUUS EVC312 CRUUS 585 EVT031 CRUUS 616 585 EVT032 CRUUS 616 EVC313 EVC314 CRUUS 585 EVT033 CRUUS 616 CRUUS 585 EVT034 CRUUS EVC315 616 CRUUS 583 EVT035 CRUUS 616 EVC316 CRUUS 584 EVT036 CRUUS 616 EVC317 CRUUS 584 EVT037 CRUUS 616 EVC318 CRUUS 584 EVT038 CRUUS 616 617 EVC319 CRUUS 584 EVT039 CRUUS EVM001 CRUUS 622 EVT040 CRUUS 618 EVM002 CRUUS 622 EVT041 CRUUS 618 EVM003 CRUUS 622 EVT042 CRUUS 618 EVM004 CRUUS 621 EVT043 CRUUS 618 EVM005 CRUUS 621 EVT044 CRUUS 618 EVM006 CRUUS 621 EVT045 CRUUS 618 EVM007 CRUUS 622 EVT046 CRUUS 617 EVM008 CRUUS 622 EVT047 CRUUS 617 EVM009 CRUUS 622 EVT048 CRUUS 617 EVM010 CRUUS 621 EVT049 CRUUS 618 EVM012 CRUUS 621 EVT050 CRUUS 618 EVM036 CRUUS 622 EVT051 CRUUS 618 EVM037 CRUUS 622 EVT052 CRUUS 618 EVM038 CRUUS 622 EVT053 CRUUS 618 EVM039 CRUUS 622 EVT054 CRUUS 618 EVM040 CRUUS 622 EVT055 CRUUS 618 EVM041 CRUUS 622 EVT056 CRUUS 618 EVT001 CRUUS 606 EVT057 CRUUS 619 EVT002 CRUUS 606 EVT058 CRUUS 619 EVT003 CRUUS 607 EVT059 CRUUS 619 EVT004 CRUUS 606 EVT060 CRUUS 619 EVT005 CRUUS 606 EVT061 CRUUS 619 EVT006 CRUUS 606 EVT062 CRUUS 619 EVT007 CRUUS 607 EVT063 CRUUS 619 EVT008 CRUUS 607 EVT064 CRUUS 606 606 EVT009 CRUUS 607 EVT067 CRUUS EVT010 CRUUS 608 EVT069 CRUUS 607 EVT011 CRUUS 608 EVT071 CRUUS 607 EVT012 CRUUS 608 EVT072 CRUUS 608 EVT013 CRUUS 608 EVT073 CRUUS 608 EVT014 CRUUS 608 EVT074 CRUUS 608 EVT015 CRUUS 608 EVT122 CRUUS 605 EVT022 CRUUS 616 EVT123 CRUUS 605 EVT023 CRUUS 616 EVT124 CRUUS 605 EVT024 CRUUS 616 EVT125 CRUUS 605 EVT025 CRUUS 616 EVT126 CRUUS 605 EVT026 CRUUS 616 EVT127 CRUUS 605 EVT027 CRUUS 616 EVT128 CRUUS 605 EVT028 CRUUS 615 EVT129 CRUUS 605 EVT029 CRUUS 615 EVT130 CRUUS 605 EVT030 CRUUS 615 EVT131 CRUUS 605 (CCC) = CCC approval is not required 27 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page EVT132 CRUUS 605 EVT182 CRUUS 613 EVT133 CRUUS 605 EVT183 CRUUS 613 EVT134 CRUUS 605 EVT184 CRUUS 613 EVT135 CRUUS 606 EVT185 CRUUS 613 EVT136 CRUUS 606 EVT186 CRUUS 613 EVT137 CRUUS 606 EVT187 CRUUS 613 EVT138 CRUUS 606 EVT188 CRUUS 613 EVT139 CRUUS 606 EVT189 CRUUS 613 EVT140 CRUUS 606 EVT190 CRUUS 613 EVT141 CRUUS 606 EVT191 CRUUS 614 EVT142 CRUUS 609 EVT192 CRUUS 614 EVT143 CRUUS 609 EVT193 CRUUS 614 EVT144 CRUUS 609 EVT194 CRUUS 614 EVT145 CRUUS 609 EVT195 CRUUS 614 EVT146 CRUUS 609 EVT196 CRUUS 614 EVT147 CRUUS 609 EVT197 CRUUS 614 EVT148 CRUUS 609 EVT198 CRUUS 614 EVT149 CRUUS 609 EVT199 CRUUS 614 EVT150 CRUUS 609 EVT200 CRUUS 614 EVT151 CRUUS 609 EVT201 CRUUS 614 EVT152 CRUUS 609 EVT236 CRUUS 615 EVT153 CRUUS 610 EVT237 CRUUS 615 EVT154 CRUUS 610 EVT238 CRUUS 615 EVT155 CRUUS 610 EVT239 CRUUS 615 EVT156 CRUUS 610 EVT240 CRUUS 615 EVT157 CRUUS 610 EVT242 CRUUS 615 EVT158 CRUUS 610 EVT243 CRUUS 615 EVT159 CRUUS 610 EVT244 CRUUS 615 EVT160 CRUUS 610 EVT245 CRUUS 615 EVT161 CRUUS 610 EVT246 CRUUS 615 EVT162 CRUUS 610 EVT248 CRUUS 617 EVT163 CRUUS 610 EVT249 CRUUS 617 EVT164 CRUUS 610 EVT250 CRUUS 617 EVT165 CRUUS 610 EVT251 CRUUS 617 EVT166 CRUUS 611 EVT253 CRUUS 617 EVT167 CRUUS 611 EVT254 CRUUS 617 EVT168 CRUUS 611 EVT255 CRUUS 617 EVT169 CRUUS 611 EVT256 CRUUS 617 EVT170 CRUUS 611 EVT257 CRUUS 617 EVT171 CRUUS 611 EVT260 CRUUS 612 EVT172 CRUUS 611 EVT261 CRUUS 612 EVT173 CRUUS 611 EVT262 CRUUS 612 EVT174 CRUUS 611 EVT263 CRUUS 612 EVT175 CRUUS 611 EVT265 CRUUS 612 EVT176 CRUUS 611 EVT266 CRUUS 612 EVT177 CRUUS 611 EVT267 CRUUS 612 EVT178 CRUUS 613 EVT268 CRUUS 612 EVT179 CRUUS 613 EVT269 CRUUS 613 EVT180 CRUUS 613 EVT279 CRUUS 611 EVT181 CRUUS 613 EVT280 CRUUS 612 Product selectors and further information can be found at: www.ifm.com 28 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page EVT281 CRUUS 612 EY1009 CE 311 EVT283 CRUUS 612 EY1010 CE 312 313 EVT284 CRUUS 612 EY1011 CE EVT285 CRUUS 612 EY1013 CE 313 EVT286 CRUUS 612 EY1014 CE 313 EVW001 CRUUS 602 EY1015 CE 313 EVW002 CRUUS 602 EY2001 CE 313 EVW003 CRUUS 602 EY2002 CE 313 313 EVW004 CRUUS 602 EY2003 CE EVW005 CRUUS 602 EY2004 CE 313 EVW006 CRUUS 602 EY2005 CE 313 EVW007 CRUUS 602 EY3001 CE 312 EVW008 CRUUS 602 EY3002 CE 312 EVW009 CRUUS 602 EY3004 CE 312 EVW010 CRUUS 603 EY3005 CE 312 EVW011 CRUUS 603 EY3006 312 EVW012 CRUUS 603 EY3007 312 EVW013 CRUUS 602 EY3008 312 EVW014 CRUUS 602 EY3009 312 EVW015 CRUUS 602 EY3010 312 EVW022 CRUUS 603 EY3011 312 EVW023 CRUUS 603 EY3090 312 EVW024 CRUUS 603 EY3091 312 EVW025 CRUUS 603 EY3092 312 EVW028 CRUUS 604 EY3098 CE EVW030 CRUUS 603 EY3099 CE 312 313 EVW031 CRUUS 603 G1501S CE, CUL, TuevNord 107, 311 EVW034 CRUUS 603 G1502S CE, CUL, TuevNord 107, 311 EVW036 CRUUS 603 G1503S CE, CUL, TuevNord 107, 311 EVW037 CRUUS 603 G2001S CE 311, 364 EVW048 CRUUS 604 GF711S CE, CUL, TuevNord 106 EVW049 CRUUS 604 GG505S CE, CUL, TuevNord 105, 495 EVW050 CRUUS 604 GG507S CE, CUL, TuevNord 105 EVW051 CRUUS 604 GG711S CE, CUL, TuevNord 106 106 EVW052 CRUUS 604 GG712S CE, CUL, TuevNord EVW053 CRUUS 604 GG851S CE, CUL 106 EVW054 CRUUS 604 GI505S CE, CUL, TuevNord 105, 495 EVW055 CRUUS 604 GI506S CE, CUL, TuevNord 105 EVW056 CRUUS 604 GI701S CE, CUL, TuevNord 106 EVW057 CRUUS 604 GI711S CE, CUL, TuevNord 106 EVW058 CRUUS 604 GI712S CE, CUL, TuevNord 106 EVW059 CRUUS 604 GM504S CE, CUL, TuevNord 105, 495 EY1001 CE 311 GM505S CE, CUL, TuevNord 105, 495 EY1002 CE 311 GM701S CE, CUL, TuevNord 106 EY1003 CE 311 GM705S CE, CUL, TuevNord 106 EY1004 CE 311 I7R201 CE, CUL, (CCC) 75 EY1005 CE 311 I7R202 CE, CUL, (CCC) 76 EY1006 CE 311 I7R203 CE, CUL, (CCC) 75 EY1007 CE 311 I7R204 CE, CUL, (CCC) 76 EY1008 CE 311 I7R205 CE, CUL, (CCC) 75 (CCC) = CCC approval is not required 29 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page I7R206 CE, CUL, (CCC) 76 IE5090 CE, CUL, (CCC) 62 I7R207 CE, CUL, (CCC) 75 IE5099 CE, (CCC) 60 I7R208 CE, CUL, (CCC) 76 IE5121 CE, (CCC) 60 I7R209 CE, CUL, (CCC) 75 IE5129 CE, (CCC) 60 I7R210 CE, CUL, (CCC) 76 IE5202 CE, (CCC) 61 I7R211 CE, CUL, (CCC) 75 IE5203 CE, CUL, (CCC) 62 I7R212 CE, CUL, (CCC) 76 IE5215 CE, (CCC) 85 I7R213 CE, CUL, (CCC) 76 IE5222 CE, (CCC) 60 I7R214 CE, CUL, (CCC) 76 IE5238 CE, (CCC) 61 I7R215 CE, CUL, (CCC) 76 IE5258 CE, CUL, (CCC) 61 I7R216 CE, CUL, (CCC) 76 IE5287 CE, CUL, (CCC) 61 I7R217 CE, CUL, (CCC) 76 IE5288 CE, CUL, (CCC) 62 I85000 CE, CUL, (CCC) 77 IE5295 CE, (CCC) 85 I85001 CE, CUL, (CCC) 77 IE5312 CE, (CCC) 62 I85002 CE, CUL, (CCC) 77 IE5327 CE, CUL, (CCC) 62 I85003 CE, CUL, (CCC) 77 IE5338 CE, CUL, (CCC) 62 I85004 CE, CUL, (CCC) 77 IE5340 CE, CUL, (CCC) 62 I85005 CE, CUL, (CCC) 77 IE5343 CE, CUL, (CCC) 61 I85006 CE, CUL, (CCC) 77 IE5344 CE, CUL, (CCC) 61 I85007 CE, CUL, (CCC) 77 IE5345 CE, CUL, (CCC) 61 IA0004 CCC, CE 78 IE5346 CE, CUL, (CCC) 61 IA0027 CCC, CE 78 IE5348 CE, CUL, (CCC) 60 IA0032 CCC, CE, CUL 78 IE5349 CE, CUL, (CCC) 62 IA5062 CE, CUL, (CCC) 69 IE5350 CE, CUL, (CCC) 62 IA5063 CE, CUL, (CCC) 69 IE5351 CE, CUL, (CCC) 61 IA5082 CE, (CCC) 69 IE5352 CE, CUL, (CCC) 61 IA5108 CCC, CE 69 IE5366 CE, CUL, (CCC) 61 IA5122 CCC, CE, CUL 69 IE5367 CE, CUL, (CCC) 61 IA5127 CE, CUL, (CCC) 69 IE5368 CE, CUL, (CCC) 60 IB0004 CCC, CE 79 IE5369 CE, CUL, (CCC) 60 IB0016 CCC, CE, CUL 79 IE5379 CE, (CCC) 62 IB0017 CE, CCC 79 IE5381 CE, (CCC) 87 IB0026 CCC, CE 79 IE5382 CE, (CCC) 87 IB0027 CE, CCC 79 IE5390 CE, (CCC) 93 IB5063 CE, CUL, (CCC) 70 IE5391 CE, (CCC) 93 IB5096 CE, (CCC) 69 IE9203 CCC, CE 95 IB5124 CCC, CE, CUL 70 IE9902 CCC, CE 95 IB5133 CE, (CCC) 70 IE9940 CE, (CCC) 96 IC0003 CCC, CE, CUL 80 IEC200 CE, CUL, (CCC) 91 IC5005 CE, CUL, (CCC) 74 IEC201 CE, CUL, (CCC) 91 ID0013 CCC, CE, CUL 80 IEC202 CE, CUL, (CCC) 91 ID0014 CE, CCC 80 IEC203 CE, CUL, (CCC) 92 ID0049 CCC, CE 80 IER200 CE, CUL, (CCC) 98 ID5005 CE, CUL, (CCC) 75 IER201 CE, CUL, (CCC) 98 ID5026 CE, (CCC) 75 IER203 CE, CUL, (CCC) 98 ID5046 CE, CUL, (CCC) 75 IER204 CE, CUL, (CCC) 99 ID5055 CE, CUL, (CCC) 74 IER205 CE, CUL, (CCC) 100 ID5058 CE, (CCC) 75 IER206 CE, CUL, (CCC) 99 ID5059 CE, CUL, (CCC) 102 IF0001 CCC, CE 78 IE5072 CE, (CCC) 60 IF0003 CE, CCC 78 Product selectors and further information can be found at: www.ifm.com 30 Standards and approvals / list of articles Order no. Approvals Catalogue page IF0005 CCC, CE 78 IF0007 CCC, CE 78 Order no. Approvals Catalogue page IFC241 CE, CUL, (CCC) 96 IFC243 CE, CUL, (CCC) 96 IF5188 CE, (CCC) 63 IFC246 CE, CUL, (CCC) 93 IF5249 CE, (CCC) 63 IFC247 CE, CUL, (CCC) 495, 95 92 IF5297 CE, (CCC) 63 IFC258 CE, CUL, (CCC) IF5313 CE, CCC 63 IFC259 CE, CUL, (CCC) 93 IF5329 CE, (CCC) 63 IFC263 CE, CUL, (CCC) 92 IF5345 CE, (CCC) 63 IFC264 CE, CUL, (CCC) 93 IF5514 CE, (CCC) 86 IFC266 CE, CUL, (CCC) 92 IF5594 CE, (CCC) 86 IFM203 CE, CUL, E1, (CCC) 103, 540 103, 540 IF5597 CE, CCC 63 IFM204 CE, E1, (CCC) IF5598 CCC, CE, CUL 63 IFM205 CCC, CE, CUL, E1 103, 540 IF5644 CE, CCC 63 IFM206 CCC, CE, CUL, E1 103, 540 IF5645 CCC, CE 63 IFM207 CE, CUL, E1, (CCC) 102, 540 IF5646 CCC, CE 63 IFM208 CE, CUL, E1, (CCC) 102, 540 IF5647 CCC, CE, CUL 64 IFM209 CCC, CE, CUL, E1 102, 540 IF5670 CE, CUL, (CCC) 101 IFM210 CCC, CE, CUL, E1 103, 540 IF5675 CE, CUL, (CCC) 102 IFR200 CE, CUL, (CCC) 98 IF5750 CE, CUL, (CCC) 101 IFR202 CE, CUL, (CCC) 98 IF5751 CE, CUL, (CCC) 102 IFR203 CE, CUL, (CCC) 99 IF5759 CCC, CE 86 IFR204 CE, CUL, (CCC) 99 IF5760 CCC, CE, CUL 86 IFR205 CE, CUL, (CCC) 100 IF5796 CE, (CCC) 86 IFR206 CE, (CCC) 99 IF5813 CE, (CCC) 86 IFS200 CE, CUL, (CCC) 57 57 IF5815 CE, (CCC) 85 IFS201 CE, CUL, (CCC) IF5851 CE, CUL, (CCC) 86 IFS204 CE, CUL, (CCC) 57 IF6028 CE, (CCC) 66 IFS205 CE, CUL, (CCC) 57 IF6029 CE, (CCC) 67 IFS206 CE, CUL, (CCC) 57 IF6030 CE, (CCC) 66 IFS207 CE, CUL, (CCC) 57 IF6031 CE, (CCC) 67 IFS208 CE, CUL, (CCC) 57 IF9222 CCC, CE 96 IFS209 CE, CUL, (CCC) 57 IF9920 CCC, CE 96 IFS210 CE, CUL, (CCC) 57 IF9924 CCC, CE 96 IFS211 CE, CUL, (CCC) 57 IFC200 CE, CUL, (CCC) 88 IFS212 CE, CUL, (CCC) 57 57 IFC201 CE, CUL, (CCC) 89 IFS213 CE, CUL, (CCC) IFC202 CE, CUL, (CCC) 88 IFS214 CE, CUL, (CCC) 62 IFC204 CE, CUL, (CCC) 87 IFS215 CE, CUL, (CCC) 63 IFC205 CE, CUL, (CCC) 88 IFS216 CE, CUL, (CCC) 62 IFC206 CE, CUL, (CCC) 87, 94 IFS217 CE, CUL, (CCC) 63 IFC207 CE, CUL, (CCC) 88 IFT200 CE, CUL, (CCC) 81 IFC208 CE, CUL, (CCC) 89 IFT201 CE, CUL, (CCC) 81 IFC209 CE, CUL, (CCC) 88, 94 IFT202 CE, CUL, (CCC) 81 IFC210 CE, CUL, (CCC) 88, 94 IFT203 CE, CUL, (CCC) 81 IFC229 CE, CUL, (CCC) 88 IFT204 CE, CUL, (CCC) 81 IFC230 CE, CUL, (CCC) 88 IFT205 CE, CUL, (CCC) 81 IFC234 CE, (CCC) 88 IFT206 CE, CUL, (CCC) 81 IFC235 CE, (CCC) 89 IFT207 CE, CUL, (CCC) 81 IFC237 CE, CUL, (CCC) 88 IFT208 CE, CUL, (CCC) 81 IFC238 CE, CUL, (CCC) 88 IFT209 CE, CUL, (CCC) 82 IFC239 CE, CUL, (CCC) 96 IFT210 CE, CUL, (CCC) 81 (CCC) = CCC approval is not required 31 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page IFT216 CE, CUL, (CCC) 81 IGC206 CE, CUL, (CCC) 89 IFT217 CE, CUL, (CCC) 81 IGC207 CE, CUL, (CCC) 89 IFT240 CE, CUL, (CCC) 84 IGC208 CE, CUL, (CCC) 90 IFT243 CE, (CCC) 84 IGC209 CE, CUL, (CCC) 89, 94 90, 94 IFT244 CE, CUL, (CCC) 84 IGC210 CE, CUL, (CCC) IFT245 CE, CUL, (CCC) 84 IGC220 CE, CUL, (CCC) 90 IFT246 CE, CUL, (CCC) 84 IGC221 CE, CUL, (CCC) 89 IFW200 CE, CUL, (CCC) 100 IGC222 CE, (CCC) 90 IFW201 CE, CUL, (CCC) 100 IGC223 CE, (CCC) 90 IG0005 CE, CUL, CCC 78 IGC224 CE, CUL, (CCC) 89 IG0006 CE, CUL, CCC 78 IGC225 CE, CUL, (CCC) 90 IG0011 CCC, CE, CUL 78 IGC232 CE, CUL, (CCC) 93 IG0012 CCC, CE 78 IGC233 CE, CUL, (CCC) 94 IG5202 CE, (CCC) 86 IGC234 CE, CUL, (CCC) 495, 95 IG5221 CE, (CCC) 64 IGC235 CE, CUL, (CCC) 495, 95 IG5285 CE, (CCC) 64 IGC248 CE, CUL, (CCC) 92 IG5397 CE, (CCC) 64 IGC249 CE, CUL, (CCC) 93 IG5398 CE, (CCC) 64 IGC250 CE, CUL, (CCC) 93 IG5399 CE, (CCC) 64 IGC252 CE, CUL, (CCC) 92 IG5401 CE, (CCC) 64 IGM200 CE, CUL, E1, (CCC) 103, 541 IG5533 CCC, CE 64 IGM201 CE, CUL, E1, (CCC) 104, 541 IG5593 CE, CCC 64 IGM202 CE, CUL, E1, (CCC) 103, 541 IG5594 CCC, CE 64 IGM203 CE, CUL, E1, (CCC) 103, 541 IG5595 CCC, CE, CUL 65 IGM204 CCC, CE, CUL, E1 104, 541 IG5596 CCC, CE 65 IGM205 CCC, CE, CUL, E1 104, 541 IG5597 CCC, CE 65 IGM206 CCC, CE, CUL, E1 103, 540 IG5602 CE, (CCC) 86 IGM207 CCC, CE, CUL, E1 103, 541 IG5647 CE, CUL, (CCC) 102 IGR200 CE, CUL, (CCC) 98 IG5667 CE, CUL, (CCC) 102 IGR202 CE, CUL, (CCC) 98 IG5682 CCC, CE 96 IGR203 CE, CUL, (CCC) 99 IG5718 CCC, CE 65 IGR204 CE, CUL, (CCC) 99 IG5719 CCC, CE 65 IGR205 CE, CUL, (CCC) 100 IG5772 CCC, CE, CUL 87 IGR206 CE, (CCC) 99 IG5806 CCC, CE 86 IGS200 CE, CUL, (CCC) 58 IG5813 CE, (CCC) 86 IGS201 CE, CUL, (CCC) 58 IG5846 CE, (CCC) 86 IGS204 CE, CUL, (CCC) 58 IG5953 CE, (CCC) 58 IGS205 CE, CUL, (CCC) 58 IG5954 CE, (CCC) 58 IGS206 CE, CUL, (CCC) 58 IG6083 CE, (CCC) 66 IGS207 CE, CUL, (CCC) 58 IG6084 CE, (CCC) 67 IGS208 CE, CUL, (CCC) 58 IG6086 CE, (CCC) 66 IGS209 CE, CUL, (CCC) 58 IG6087 CE, (CCC) 67 IGS210 CE, CUL, (CCC) 59 IG9983 CCC, CE 96 IGS212 CE, CUL, (CCC) 58 IG9984 CCC, CE 96 IGS213 CE, CUL, (CCC) 58 IGC200 CE, CUL, (CCC) 89 IGS214 CE, CUL, (CCC) 64 IGC201 CE, CUL, (CCC) 90 IGS216 CE, CUL, (CCC) 64 IGC202 CE, CUL, (CCC) 89 IGS217 CE, CUL, (CCC) 64 IGC203 CE, CUL, (CCC) 90 IGT200 CE, CUL, (CCC) 82 IGC204 CE, CUL, (CCC) 89 IGT201 CE, CUL, (CCC) 82 IGC205 CE, CUL, (CCC) 90 IGT202 CE, CUL, (CCC) 82 Product selectors and further information can be found at: www.ifm.com 32 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page IGT203 CE, CUL, (CCC) 82 IIC213 CE, CUL, (CCC) 97 IGT204 CE, CUL, (CCC) 82 IIC218 CE, CUL, (CCC) 94 IGT205 CE, CUL, (CCC) 82 IIC219 CE, CUL, (CCC) 94 IGT206 CE, CUL, (CCC) 82 IIC220 CE, CUL, (CCC) 495, 95 495, 95 IGT207 CE, CUL, (CCC) 82 IIC221 CE, CUL, (CCC) IGT208 CE, CUL, (CCC) 82 IIC224 CE, CUL, (CCC) 92 IGT209 CE, CUL, (CCC) 83 IIC226 CE, CUL, (CCC) 92 IGT219 CE, CUL, (CCC) 82 IIM200 CE, CUL, E1, (CCC) 104, 542 104, 542 IGT220 CE, CUL, (CCC) 82 IIM201 CE, CUL, E1, (CCC) IGT240 CE, CUL, (CCC) 87 IIM202 CE, CUL, E1, (CCC) 104, 541 IGT247 CE, CUL, (CCC) 84 IIM203 CE, CUL, E1, (CCC) 104, 542 IGT248 CE, CUL, (CCC) 85 IIM208 CCC, CE, CUL, E1 104, 542 IGT249 CE, CUL, (CCC) 84 IIM209 CCC, CE, CUL, E1 105, 542 IGT250 CE, CUL, (CCC) 85 IIM210 CCC, CE, CUL, E1 104, 541 IGW200 CE, CUL, (CCC) 100 IIM211 CCC, CE, CUL, E1 104, 541 IGW201 CE, CUL, (CCC) 100 IIR200 CE, CUL, (CCC) 98 II0005 CE, CCC 78 IIR202 CE, CUL, (CCC) 98 II0006 CE, CCC 79 IIR203 CE, CUL, (CCC) 99 II0011 CE, CUL, CCC 79 IIR204 CE, CUL, (CCC) 99 II0012 CE, CUL, CCC 79 IIR205 CE, CUL, (CCC) 100 99 II5166 CE, (CCC) 65 IIR206 CE, (CCC) II5256 CE, (CCC) 65 IIS204 CE, CUL, (CCC) 59 II5284 CE, (CCC) 65 IIS205 CE, CUL, (CCC) 59 II5300 CE, (CCC) 65 IIS206 CE, CUL, (CCC) 59 59 II5346 CE, (CCC) 65 IIS207 CE, CUL, (CCC) II5369 CE, (CCC) 65 IIS208 CE, CUL, (CCC) 59 II5436 CCC, CE 66 IIS209 CE, CUL, (CCC) 59 II5488 CE, CCC 65 IIS210 CE, CUL, (CCC) 59 II5489 CE, CCC 66 IIS211 CE, CUL, (CCC) 59 II5490 CE, CCC 66 IIT002 CCC, CE, CUL 83 II5491 CCC, CE 66 IIT200 CE, CUL, (CCC) 83 II5492 CE, CCC 66 IIT202 CE, CUL, (CCC) 83 II5493 CE, CCC 65 IIT204 CE, CUL, (CCC) 83 II5503 CE, CUL, (CCC) 102 IIT205 CE, CUL, (CCC) 83 II5689 CE, CUL, (CCC) 87 IIT206 CE, CUL, (CCC) 83 II5733 CCC, CE 87 IIT207 CE, CUL, (CCC) 83 II5751 CCC, CE 87 IIT208 CE, CUL, (CCC) 84 II5776 CE, (CCC) 87 IIT209 CE, CUL, (CCC) 83 II5913 CE, (CCC) 67 IIT212 CE, CUL, (CCC) 83 II5914 CE, (CCC) 67 IIT213 CE, CUL, (CCC) 83 II5916 CE, (CCC) 66 IIT228 CE, CUL, (CCC) 85 II5917 CE, (CCC) 67 IIT230 CE, CUL, (CCC) 85 IIC200 CE, CUL, (CCC) 90 IIT231 CE, CUL, (CCC) 85 IIC201 CE, CUL, (CCC) 91 IIT232 CE, CUL, (CCC) 85 IIC206 CE, CUL, (CCC) 90, 95 IIW200 CE, CUL, (CCC) 100 IIC207 CE, CUL, (CCC) 91 IIW201 CE, CUL, (CCC) 100 IIC208 CE, (CCC) 91 IL5002 CE, CUL, (CCC) 70 IIC209 CE, (CCC) 91 IL5003 CE, CUL, (CCC) 70 IIC210 CE, CUL, (CCC) 91 IL5004 CE, CUL, (CCC) 70 IIC211 CE, CUL, (CCC) 91 IL5005 CE, CUL, (CCC) 70 (CCC) = CCC approval is not required 33 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page IL5020 CE, CUL, (CCC) 70 IN5188 CE, (CCC) 71 IL5022 CE, CUL, (CCC) 70 IN5207 CE, CCC 71 IM0010 CCC, CE, CUL 80 IN5208 CCC, CE, CUL 71 IM0011 CCC, CE, CUL 80 IN5212 CE, CUL, (CCC) 72 IM0049 CCC, CE 80 IN5224 CE, (CCC) 188 188 IM0053 CCC, CE 80 IN5225 CE, CUL, (CCC) IM0054 CCC, CE 80 IN5230 CE, CUL, (CCC) 71 IM5019 CE, CUL, (CCC) 74 IN5251 CE, (CCC) 188 IM5020 CE, CUL, (CCC) 74 IN5281 CE, (CCC) 105, 542 IM5037 CCC, CE 74 IN5282 CE, (CCC) 105, 542 IM5038 CCC, CE 74 IN5285 CE, CUL, (CCC) 188 IM5046 CE, (CCC) 74 IN5304 CE, (CCC) 188 IM5115 CE, CUL, (CCC) 72 IN5323 CE 188 IM5116 CE, CUL, (CCC) 72 IN5327 CE, CUL, (CCC) 188 IM5117 CE, CUL, (CCC) 73 IN5331 CE, (CCC) 188 IM5118 CE 495, 74 IN5334 CE, CUL, (CCC) 189 IM5119 CE, CUL, (CCC) 100, 72 IN5409 CE, (CCC) 189 IM5120 CE, CUL, (CCC) 101, 72 IO5016 CE, (CCC) 97 IM5123 CE, CUL, (CCC) 73 IO5017 CE, (CCC) 97 IM5124 CE, CUL, (CCC) 101, 73 IO5018 CE, (CCC) 97 IM5125 CE, CUL, (CCC) 101, 73 IS5001 CE, CUL, (CCC) 70 IM5126 CE, CUL, (CCC) 101, 74 IS5026 CE, CUL, (CCC) 71 IM5127 CE, (CCC) 97 IS5031 CE, CUL, (CCC) 71 IM5128 CE, CUL, (CCC) 72 IS5035 CE, CUL, (CCC) 71 IM5129 CE, CUL, (CCC) 101, 73 IS5070 CE, (CCC) 71 IM5130 CE, CUL, (CCC) 72 IS5071 CE, CUL, (CCC) 71 IM5131 CE, CUL, (CCC) 73 IT5001 CE, (CCC) 68 IM5132 CE, CUL, (CCC) 101, 73 IT5021 CE, CUL, (CCC) 68 IM5133 CE, CUL, (CCC) 101, 73 IT5034 CE, CUL, (CCC) 68 IM5134 CE, CUL, (CCC) 73 IT5039 CE, CUL, (CCC) 68 IM5135 CE, CUL, (CCC) 101, 73 IT5040 CE, CUL, (CCC) 69 IM5136 CE, CUL, (CCC) 73 IT5042 CE, CUL, (CCC) 68 IM5137 CE, (CCC) 97 IT5044 CE, CUL, (CCC) 69 IM5138 CE, (CCC) 97 IV5003 CE 74 IM5139 CE, (CCC) 67 IV5004 CE 74 IM5140 CE, (CCC) 67 IV5025 CE 102 IM5141 CE, (CCC) 67 IW5051 CE, (CCC) 72 IM5142 CE, (CCC) 67 IW5053 CE, (CCC) 72 IN0073 CCC, CE 79 IW5058 CE, (CCC) 72 IN0077 CCC, CE 79 IW5062 CE, (CCC) 72 IN0081 CCC, CE 79 IW5064 CE, CUL, (CCC) 72 IN0085 CCC, CE 79 IX5002 CE, (CCC) 191 IN0108 CCC, CE, CUL 189 IX5006 CE, (CCC) 191 IN0110 CCC, CE 188 IX5010 CE, (CCC) 191 IN507A CE 191 IX5030 CE, (CCC) 192 IN508A CE 191 IY5029 CE, (CCC) 59 IN509A CE 191 IY5036 CE, CUL, (CCC) 60 IN5121 CE, (CCC) 71 IY5048 CE, CUL, (CCC) 60 IN5129 CE, (CCC) 71 IY5049 CE, CUL, (CCC) 60 IN5186 CE, (CCC) 71 IY5051 CE, (CCC) 60 Product selectors and further information can be found at: www.ifm.com 34 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page IY5052 CE, (CCC) 60 KI5015 CE, CUL, (CCC) 139 IZ5026 CE, CUL, (CCC) 68 KI5019 CE, CUL, (CCC) 139 IZ5035 CE, CUL, (CCC) 68 KI5023 CCC, CE, CUL 139 IZ5046 CE, CUL, (CCC) 68 KI5024 CE, CUL, (CCC) 139 IZ5047 CE, CUL, (CCC) 68 KI5030 CCSAUS, CE, FM, IEC 144 IZ5048 CE, CUL, (CCC) 68 KI5031 CCSAUS, CE, FM 145 IZ5051 CE, (CCC) 68 KI5038 CE, (CCC) 139 IZ5052 CE, (CCC) 68 KI5065 CE 145 JAC201 CE, (CCC) 285 KI5082 CE, CUL 144 JAT201 CE, (CCC) 285 KI5083 CE, CUL 144 KB0025 CCC, CE, CUL 142 KI5084 CE, CUL 139 KB0029 CCC, CE, CUL 142 KI5085 CE, CUL 139 KB5001 CE, CUL, (CCC) 140 KI5086 CE, CUL 139 KB5002 CE, CUL, (CCC) 140 KI5087 CE, CUL 139 KB5003 CE, CUL, (CCC) 140 KI5207 CE, CSA, CUL, (CCC) 139 KB5004 CE, CUL, (CCC) 140 KN5121 CE, (CCC) 144 KB5062 CE, (CCC) 140 KQ6001 CE, CUL 143 KB5096 CE, (CCC) 140 KQ6002 CE, CUL 143 143 KD0009 CCC, CE 142 KQ6003 CE, CUL KD0012 CCC, CE 142 KQ6004 CE, CUL 143 KD0013 CCC, CE 142 KQ6005 CE, CUL 143 KD5018 CE, (CCC) 141 KT5001 CE, (CCC) 156 KD5022 CE, (CCC) 140 KT5002 CE, (CCC) 156 KD5024 CE, (CCC) 140 KX5001 CCSAUS, CE, FM 145 KD5039 CE, (CCC) 140 KX5002 CCSAUS, CE, FM 145 KF5001 CE, CUL 138 LDH100 CE 378, 479 377 KF5002 CE, CUL 138 LI2141 CE, CUL KF5013 CE, CUL 138 LI2142 CE, CUL 377 KG0008 CCC, CE 141 LI2143 CE, CUL 377 KG0009 CCC, CE 141 LI5141 CE, CUL 377 KG0010 CCC, CE 141 LI5142 CE, CUL 377 KG0016 CCC, CE 144 LI5143 CE, CUL 377 KG5040 CCC, CE 138 LI5144 CE, CUL 377 KG5041 CE 138 LK1022 CE, CUL 372 372 KG5043 CE, (CCC) 138 LK1023 CE, CUL KG5047 CCC, CE 138 LK1024 CE, CUL 372 KG5057 CE, (CCC) 138 LK1222 CE 372 KG5065 CE, CUL 143 LK1223 CE 372 KG5066 CE, CUL 143 LK1224 CE 372 KG5067 CE, CUL 142 LK3122 CE, CUL 372 KG5069 CE, CUL 142 LK3123 CE, CUL 372 KG5071 CE, CUL 143 LK3124 CE, CUL 372 KI0016 CCC, CE, CUL 141 LK8122 CE, CUL 372 KI0020 CCC, CE, CUL 141 LK8123 CE, CUL 372 KI0024 CCC, CE, CUL 141 LK8124 CE, CUL 373 KI0040 CCC, CE 141 LL8022 CE, CUL 374 KI0042 CE 145 LL8023 CE, CUL 374 KI0054 CCC, CE 144 LL8024 CE, CUL 374 KI5001 CE, CUL, (CCC) 138 LMT100 CE, CUL, EHEDG, FDA 373 KI5002 CE, CUL, (CCC) 138 LMT110 CE, CUL, EHEDG, FDA 373 (CCC) = CCC approval is not required 35 Standards and approvals / list of articles Order no. Approvals Catalogue page LR3000 CE, CUL 373 LR3300 CE, CUL 373 LR7000 CE, CUL 373 LR7300 CE, CUL 373 LR8000 CE, CUL 373 Order no. Approvals Catalogue page MK5115 CE, CUL, (CCC) 168 MK5117 CE, CUL, (CCC) 168 MK5122 CE, CUL, (CCC) 169 MK5124 CE, CUL, (CCC) 168 MK5128 CE, CUL, (CCC) 172 LR8300 CE, CUL 373 MK5137 CE, CUL, (CCC) 172 LT8022 CE, CUL 374 MK5138 CE, CUL, (CCC) 173 LT8023 CE, CUL 374 MK5139 CE, CUL, (CCC) 173 172 LT8024 CE, CUL 374 MK5140 CE, CUL, (CCC) ME5010 CE, CUL, (CCC) 161 MK5155 CE, CUL, (CCC) 173 ME5011 CE, CUL, (CCC) 160 MK5156 CE, CUL, (CCC) 172 ME5015 CE, (CCC) 161 MK5157 CE, CUL, (CCC) 173 MF5004 CE, (CCC) 161 MK5158 CE, CUL, (CCC) 173 MFS200 CE, CUL, (CCC) 161 MK5159 CE, CUL, (CCC) 173 MFS201 CE, CUL, (CCC) 160 MK5161 CE, CUL, (CCC) 172 MFS202 CE, CUL, (CCC) 161 MK5186 CE, UL, (CCC) 172 MFS203 CE, CUL, (CCC) 161 MK5300 CE, CUL, (CCC) 174 MFS209 CE, CUL, (CCC) 160 MK5301 CE, CUL, (CCC) 174 MFS210 CE, CUL, (CCC) 160 MK5302 CE, CUL, (CCC) 175 MFS211 CE, CUL, (CCC) 160 MK5304 CE, CUL, (CCC) 175 MFT200 CE, CUL, (CCC) 162 MK5305 CE, CUL, (CCC) 175 MFT202 CE, CUL, (CCC) 162 MK5306 CE, CUL, (CCC) 174 MFT204 CE, CUL, (CCC) 162 MK5307 CE, CUL, (CCC) 174 MGS200 CE, CUL, (CCC) 161 MK5308 CE, CUL, (CCC) 175 175 MGS201 CE, CUL, (CCC) 161 MK5309 CE, CUL, (CCC) MGS202 CE, (CCC) 161 MK5310 CE, CUL, (CCC) 175 MGS204 CE, CUL, (CCC) 160 MK5311 CE, CUL, (CCC) 175 MGS205 CE, CUL, (CCC) 160 MK5312 CE, CUL, (CCC) 175 MGS206 CE, CUL, (CCC) 160 MK5314 CE, CUL, (CCC) 175 MGT200 CE, CUL, (CCC) 162 MK5315 CE, CUL, (CCC) 176 MGT201 CE, (CCC) 162 MK5325 CE, CUL, (CCC) 176 MGT203 CE, CUL, (CCC) 162 MK5326 CE, CUL, (CCC) 176 MK500A CE 174 MK5328 CE, (CCC) 176 MK501A CE 174 MK5329 CE, (CCC) 176 MK502A CE 173 MK5330 CE, (CCC) 176 MK503A CE, (CCC) 174 MK5331 CE, (CCC) 176 MK5100 CE, CUL, (CCC) 168 MK5900 CE, CUL, (CCC) 168 MK5101 CE, CUL, (CCC) 168 MK5902 CE, CUL, (CCC) 168 MK5102 CE, CUL, (CCC) 169 MN5200 CE, (CCC) 162 MK5103 CE, CUL, (CCC) 168 MR0100 CE, UL 170 MK5104 CE, CUL, (CCC) 169 MR0101 CE, UL 170 MK5105 CE, CUL, (CCC) 169 MR0102 CE, UL 170 MK5106 CE, CUL, (CCC) 169 MR0107 CE, UL 170 MK5107 CE, CUL, (CCC) 169 MR0117 CE, UL 170 MK5108 CE, CUL, (CCC) 169 MR0119 CE, UL 170 MK5109 CE, CUL, (CCC) 169 MR0120 CE, UL 171 MK5110 CE, CUL, (CCC) 172 MR0121 CE, UL 171 MK5111 CE, CUL, (CCC) 172 MR0122 CE, UL 171 MK5112 CE, CUL, (CCC) 169 MR0123 CE, UL 171 MK5114 CE, CUL, (CCC) 168 MR0901 CE, CUL 170 Product selectors and further information can be found at: www.ifm.com 36 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page MR0902 CE, CUL 170 O2D225 CE, CUL, (CCC) 322 MR500A CE 171 O2D227 CE, CUL, (CCC) 322 MR501A CE, (CCC) 171 O2D229 CE, CUL, (CCC) 322 MS5010 CE, CUL, (CCC) 162 O2D900 CE, CUL, (CCC) 323 MS5011 CE, CUL, (CCC) 161 O2D901 CE, CUL, (CCC) 323 N0030A CE, CSA, FM 145, 368 O2D902 CE, CUL, (CCC) 323 N0031A CE 109, 145 O2D903 CE, CUL, (CCC) 323 N0032A CE, CSA, FM 109, 145 O2D904 CE, CUL, (CCC) 323 323 N0033A CE 109, 145 O2D905 CE, CUL, (CCC) N0530A CE 109, 146 O2D906 CE, (CCC) 323 N0531A CE, CSA, FM, IEC 109, 146 O2D907 CE, (CCC) 323 N0532A CE, CSA, FM, IEC 109, 146 O2D908 CE, (CCC) 323 N0533A CE 109, 146 O2D909 CE, (CCC) 324, 518 N0534A CE, CSA, FM, IEC 109, 146 O2D910 CE, (CCC) 323 N7S20A CE, IEC 108 O2D911 CE, (CCC) 323 N7S21A CE, IEC 108 O2D912 CE, (CCC) 323 N7S23A CE, IEC 109 O2I100 CE, CUL, (CCC) 518 N95001 CE, IEC 190 O2I101 CE, CUL, (CCC) 518 518 N95002 CE 190 O2I102 CE, CUL, (CCC) NE5001 CCSAUS, CE, FM 107 O2I103 CE, CUL, (CCC) 518 NF5001 CCSAUS, CE, FM 107 O2I104 CE, CUL, (CCC) 518 NF5002 CCSAUS, CE, FM, IEC 107 O2I105 CE, CUL, (CCC) 518 NF5003 CCSAUS, CE, FM 107 O2M110 CE, E1, (CCC) 538 NF5004 CCSAUS, CE, FM 107 O2M113 CE, E1, (CCC) 538 322 NG5001 CCSAUS, CE, FM 107 O2V100 CE, CUL, (CCC) NG5002 CCSAUS, CE, FM, IEC 108 O2V102 CE, CUL, (CCC) 322 NG5003 CCSAUS, CE, FM 108 O2V104 CE, CUL, (CCC) 322 NG5004 CCSAUS, CE, FM 108 O3D200 CE, CUL, (CCC) 326 NI5001 CCSAUS, CE, FM 108 O3D201 CE, CUL, (CCC) 326 NI5002 CCSAUS, CE, FM, IEC 108 O4E200 CE, CUL, (CCC) 224 NI5003 CCSAUS, CE, FM 108 O4E201 CE, CUL, (CCC) 224 NI5004 CCSAUS, CE, FM 108 O4E500 CE, CUL, (CCC) 225 NN5002 CCSAUS, CE, FM 108 O4E501 CE, CUL, (CCC) 224 NN5008 CCSAUS, CE, FM 190 O4H200 CE, CUL, (CCC) 224 224 NN5009 CCSAUS, CE, FM 190 O4H201 CE, CUL, (CCC) NN5011 CCSAUS, CE, FM 190 O4H500 CE, CUL, (CCC) 225 NN5013 CE 190 O4H501 CE, CUL, (CCC) 225 NS5002 CCSAUS, CE, FM, IEC 108 O4P200 CE, CUL, (CCC) 224 NT5001 CCSAUS, CE, FM 107 O4P201 CE, CUL, (CCC) 224 O1D100 CE, CUL, (CCC) 260 O4P500 CE, CUL, (CCC) 225 O1D101 CE, CUL, (CCC) 250 O4P501 CE, CUL, (CCC) 225 O1D103 CE, CUL, (CCC) 260 O4S200 CE, CUL, (CCC) 224 O1D104 CE, CUL, (CCC) 251 O4S500 CE, CUL, (CCC) 224 O1D105 CE, CUL, (CCC) 260 O4S501 CE, CUL, (CCC) 224 O1D106 CE, CUL, (CCC) 260 O5C500 CE, CUL, (CCC) 285 O1D155 CE, CUL, (CCC) 260 O5E200 CE, CUL, (CCC) 221 O1D300 CE, CUL, (CCC) 260 O5E500 CE, CUL, (CCC) 222 O2D220 CE, CUL, (CCC) 322 O5E501 CE, CUL, (CCC) 221 O2D222 CE, CUL, (CCC) 322 O5E502 CE, CUL, (CCC) 222 O2D224 CE, CUL, (CCC) 322 O5E51A CE, (CCC) 223 (CCC) = CCC approval is not required 37 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page O5E700 CE, CUL, (CCC) 251 O5G500 CE, CUL, (CCC) 284 OF5014 CE, CUL, (CCC) 204 OF5016 CE, CUL, (CCC) 204 204 O5H200 CE, CUL, (CCC) 221 OF5018 CE, CUL, (CCC) O5H201 CE, CUL, (CCC) 221 OF5019 CE, CUL, (CCC) 204 O5H500 CE, CUL, (CCC) 222 OF5021 CE, CUL, (CCC) 204 O5H501 CE, CUL, (CCC) 222 OF5022 CE, CUL, (CCC) 204 O5H503 CE, CUL, (CCC) 222 OF5024 CE, CUL, (CCC) 204 O5H504 CE, CUL, (CCC) 222 OF5025 CE, CUL, (CCC) 204 O5H51A CE, (CCC) 223 OF5026 CE, CUL, (CCC) 205 O5H700 CE, CUL, (CCC) 251 OF5027 CE, CUL, (CCC) 205 O5K500 CE, CUL, (CCC) 284 OF5032 CE, CUL, (CCC) 205 O5P200 CE, CUL, (CCC) 221 OF5048 CE, CUL, (CCC) 205 O5P201 CE, CUL, (CCC) 221 OF5049 CE, CUL, (CCC) 205 O5P500 CE, CUL, (CCC) 222 OF5050 CE, CUL, (CCC) 204 O5P501 CE, CUL, (CCC) 222 OF5051 CE, CUL, (CCC) 204 O5P502 CE, CUL, (CCC) 222 OF5060 CE, CUL, (CCC) 205 O5P51A CE, (CCC) 223 OF5062 CE, CUL, (CCC) 204 O5P700 CE, CUL, (CCC) 251 OG0028 CCC, CE 206 206 O5S200 CE, CUL, (CCC) 221 OG0029 CCC, CE O5S500 CE, CUL, (CCC) 221 OG0030 CCC, CE, CUL 206 O5S501 CE, CUL, (CCC) 221 OG0031 CCC, CE 206 O5S51A CE, (CCC) 222 OG0032 CCC, CE 207 O5S700 CE, CUL, (CCC) 251 OG0033 CCC, CE 207 O7E200 CE, UL, (CCC) 215 OG0034 CCC, CE 208 208 O7E201 CE, UL, (CCC) 215 OG0035 CCC, CE O7E202 CE, UL, (CCC) 215 OG0038 CCC, CE 206 O7E203 CE, UL, (CCC) 215 OG0039 CCC, CE 206 O7H200 CE, UL, (CCC) 216 OG0040 CCC, CE 208 O7H201 CE, UL, (CCC) 216 OG0041 CCC, CE 208 O7H202 CE, UL, (CCC) 216 OG0043 CCC, CE 207 O7H203 CE, UL, (CCC) 216 OG0044 CCC, CE 207 O7H204 CE, UL, (CCC) 216 OG0047 CE, CCC 208 O7H205 CE, UL, (CCC) 216 OG5123 CE, CUL, (CCC) 210 O7H206 CE, UL, (CCC) 216 OG5124 CE, CUL, (CCC) 210 210 O7H207 CE, UL, (CCC) 216 OG5125 CE, CUL, (CCC) O7H208 CE, UL, (CCC) 216 OG5126 CE, CUL, (CCC) 210 O7H209 CE, UL, (CCC) 216 OG5127 CE, CUL, (CCC) 210 O7H210 CE, UL, (CCC) 216 OG5128 CE, CUL, (CCC) 210 O7H211 CE, UL, (CCC) 216 OG5129 CE, CUL, (CCC) 210 O7P200 CE, UL, (CCC) 215 OGE100 CE, CUL, (CCC) 205 O7P201 CE, UL, (CCC) 215 OGE101 CE, CUL, (CCC) 206 O7P202 CE, UL, (CCC) 215 OGE102 CE, CUL, (CCC) 206 O7P203 CE, UL, (CCC) 215 OGE103 CE, CUL, (CCC) 206 O7S200 CE, UL, (CCC) 215 OGE200 CE, CUL, (CCC) 206 OBF500 CE, CUL, (CCC) 264 OGE201 CE, CUL, (CCC) 206 OBF501 CE, CUL, (CCC) 264 OGE280 CE, CUL, (CCC) 212 OBF502 CE, CUL, (CCC) 264 OGE281 CE, CUL, (CCC) 212 OBF503 CE, CUL, (CCC) 264 OGE282 CE, CUL, (CCC) 212 OF5010 CE, CUL, (CCC) 205 OGE300 CE, CUL, (CCC) 211 OF5012 CE, CUL, (CCC) 205 OGE301 CE, CUL, (CCC) 211 Product selectors and further information can be found at: www.ifm.com 38 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page OGE302 CE, CUL, (CCC) 210 OGS200 CE, CUL, (CCC) 206 OGE303 CE, CUL, (CCC) 210 OGS280 CE, CUL, (CCC) 212 211 OGE500 CE, CUL, (CCC) 209 OGS300 CE, CUL, (CCC) OGE502 CE, CUL, (CCC) 208 OGS301 CE, CUL, (CCC) 210 OGE700 CE, CUL, (CCC) 248 OGS500 CE, CUL, (CCC) 209 OGE701 CE, CUL, (CCC) 248 OGS501 CE, CUL, (CCC) 208 OGH200 CE, CUL, (CCC) 208 OGS700 CE, CUL, (CCC) 248 OGH280 CE, CUL, (CCC) 213 OGS701 CE, CUL, (CCC) 248 207 OGH281 CE, CUL, (CCC) 213 OGT100 CE, CUL, (CCC) OGH282 CE, CUL, (CCC) 213 OGT101 CE, CUL, (CCC) 207 OGH283 CE, CUL, (CCC) 213 OGT102 CE, CUL, (CCC) 207 OGH300 CE, CUL, (CCC) 212 OGT103 CE, CUL, (CCC) 207 OGH301 CE, CUL, (CCC) 212 OGT200 CE, CUL, (CCC) 208 OGH302 CE, CUL, (CCC) 212 OGT500 CE, CUL, (CCC) 209 OGH303 CE, CUL, (CCC) 212 OH5001 CE, (CCC) 213 OGH304 CE, CUL, (CCC) 212 OH5002 CE, (CCC) 213 OGH305 CE, CUL, (CCC) 212 OH5003 CE, (CCC) 214 OGH306 CE, CUL, (CCC) 211 OH5004 CE, (CCC) 214 215 OGH307 CE, CUL, (CCC) 211 OH5005 CE, (CCC) OGH308 CE, CUL, (CCC) 211 OH5006 CE, (CCC) 214 OGH309 CE, CUL, (CCC) 211 OH5007 CE, (CCC) 215 OGH310 CE, CUL, (CCC) 211 OH5008 CE, (CCC) 214 OGH311 CE, CUL, (CCC) 211 OH5009 CE, (CCC) 215 OGH500 CE, CUL, (CCC) 209 OH5010 CE, (CCC) 214 214 OGH501 CE, CUL, (CCC) 209 OH5011 CE, (CCC) OGH502 CE, CUL, (CCC) 209 OH5012 CE, (CCC) 214 OGH504 CE, CUL, (CCC) 209 OH5015 CE, (CCC) 214 OGH580 CE, CUL, (CCC) 213 OH5016 CE, (CCC) 214 OGH581 CE, CUL, (CCC) 213 OH5017 CE, (CCC) 214 OGH700 CE, CUL, (CCC) 248 OH5018 CE, (CCC) 214 OGP100 CE, CUL, (CCC) 206 OH5019 CE, (CCC) 214 OGP101 CE, CUL, (CCC) 207 OH5020 CE, (CCC) 213 OGP102 CE, CUL, (CCC) 207 OJ5000 CE, CUL, (CCC) 220 OGP103 CE, CUL, (CCC) 207 OJ5001 CE, CUL, (CCC) 220 220 OGP200 CE, CUL, (CCC) 207 OJ5004 CE, CUL, (CCC) OGP201 CE, CUL, (CCC) 207 OJ5005 CE, CUL, (CCC) 220 OGP280 CE, CUL, (CCC) 212 OJ5006 CE, CUL, (CCC) 219 OGP281 CE, CUL, (CCC) 212 OJ5008 CE, CUL, (CCC) 219 OGP282 CE, CUL, (CCC) 213 OJ5009 CE, CUL, (CCC) 219 OGP283 CE, CUL, (CCC) 213 OJ5010 CE, CUL, (CCC) 219 OGP300 CE, CUL, (CCC) 211 OJ5011 CE, CUL, (CCC) 219 OGP301 CE, CUL, (CCC) 211 OJ5012 CE, CUL, (CCC) 219 OGP302 CE, CUL, (CCC) 211 OJ5014 CE, CUL, (CCC) 250 OGP303 CE, CUL, (CCC) 211 OJ5016 CE, CUL, (CCC) 250 OGP500 CE, CUL, (CCC) 209 OJ5017 CE, CUL, (CCC) 250 OGP502 CE, CUL, (CCC) 209 OJ5019 CE, CUL, (CCC) 249 OGP503 CE, CUL, (CCC) 209 OJ5020 CE, CUL, (CCC) 250 OGP700 CE, CUL, (CCC) 248 OJ5022 CE, CUL, (CCC) 218 OGP701 CE, CUL, (CCC) 248 OJ5023 CE, CUL, (CCC) 218 OGS100 CE, CUL, (CCC) 205 OJ5024 CE, CUL, (CCC) 218 (CCC) = CCC approval is not required 39 Standards and approvals / list of articles Order no. Approvals Catalogue page OJ5026 CE, CUL, (CCC) 218 OJ5027 CE, CUL, (CCC) 218 Order no. Approvals Catalogue page OJ5154 CE, CUL, (CCC) 249 OJ5158 CE, CUL, (CCC) 249 284 OJ5028 CE, CUL, (CCC) 218 OJ5185 CE, CUL, (CCC) OJ5030 CE, CUL, (CCC) 217 OJ5186 CE, CUL, (CCC) 284 OJ5031 CE, CUL, (CCC) 217 OJ5189 CE, CUL, (CCC) 284 OJ5032 CE, CUL, (CCC) 217 OJ5190 CE, CUL, (CCC) 284 OJ5033 CE, CUL, (CCC) 217 OJ5191 CE, CUL, (CCC) 284 OJ5034 CE, CUL, (CCC) 217 OJE200 CE, CUL, (CCC) 217 217 OJ5036 CE, CUL, (CCC) 249 OJH200 CE, CUL, (CCC) OJ5038 CE, CUL, (CCC) 248 OJP200 CE, CUL, (CCC) 217 OJ5039 CE, CUL, (CCC) 249 OJR200 CE, CUL, (CCC) 217 OJ5041 CE, CUL, (CCC) 248 OJS200 CE, CUL, (CCC) 216 OJ5042 CE, CUL, (CCC) 248 OK5001 CCC, CE, CUL 268 OJ5044 CE, CUL, (CCC) 220 OK5008 CCC, CE, CUL 269 OJ5048 CE, CUL, (CCC) 218 OL0004 CCC, CE 223 OJ5052 CE, CUL, (CCC) 250 OL0005 CCC, CE 223 OJ5054 CE, CUL, (CCC) 249 OL0006 CE 223 OJ5056 CE, CUL, (CCC) 250 OL0007 CCC, CE 223 223 OJ5058 CE, CUL, (CCC) 249 OL0009 CCC, CE OJ5060 CE, CUL, (CCC) 220 OO5000 CE, CUL, (CCC) 264 OJ5061 CE, CUL, (CCC) 220 OO5001 CE, CUL, (CCC) 264 OJ5062 CE, CUL, (CCC) 219 OO5002 CE, CUL, (CCC) 264 OJ5063 CE, CUL, (CCC) 219 OO5003 CE, CUL, (CCC) 264 OJ5065 CE, CUL, (CCC) 219 OO5004 CE, CUL, (CCC) 268 268 OJ5067 CE, CUL, (CCC) 219 OO5005 CE, CUL, (CCC) OJ5069 CE, CUL, (CCC) 220 OO5006 CE, CUL, (CCC) 268 OJ5070 CE, CUL, (CCC) 220 OO5007 CE, CUL, (CCC) 268 OJ5071 CE, CUL, (CCC) 218 OPL200 CE, CUL, (CCC) 287 OJ5078 CE, CUL, (CCC) 218 OPL201 CE, CUL, (CCC) 287 OJ5085 CE, CUL, (CCC) 284 OPL202 CE, CUL, (CCC) 287 OJ5086 CE, CUL, (CCC) 284 OPL203 CE, CUL, (CCC) 287 OJ5100 CE, CUL, (CCC) 220 OPU200 CE, (CCC) 285 OJ5104 CE, CUL, (CCC) 220 OPU201 CE, CUL, (CCC) 285 OJ5108 CE, CUL, (CCC) 219 OPU202 CE, CUL, (CCC) 285 285 OJ5109 CE, CUL, (CCC) 219 OPU203 CE, CUL, (CCC) OJ5114 CE, CUL, (CCC) 250 OPU204 CE, CUL, (CCC) 285 OJ5116 CE, CUL, (CCC) 250 OPU205 CE, CUL, (CCC) 286 OJ5117 CE, (CCC) 250 OPU207 CE, (CCC) 286 OJ5122 CE, CUL, (CCC) 218 OPU208 CE, CUL, (CCC) 286 OJ5126 CE, CUL, (CCC) 218 OPU209 CE, CUL, (CCC) 286 OJ5130 CE, CUL, (CCC) 217 OPU210 CE, CUL, (CCC) 286 OJ5131 CE, CUL, (CCC) 217 OPU211 CE, CUL, (CCC) 286 OJ5136 CE, CUL, (CCC) 249 OPU700 CE, CUL, (CCC) 286 OJ5138 CE, CUL, (CCC) 249 OPU701 CE, CUL, (CCC) 286 OJ5139 CE, CUL, (CCC) 249 OPU702 CE, CUL, (CCC) 286 OJ5141 CE, CUL, (CCC) 249 OU5001 CCC, CE, CUL 269 OJ5142 CE, CUL, (CCC) 249 OU5002 CCC, CE, CUL 269 OJ5144 CE, CUL, (CCC) 220 OU5043 CCC, CE, CUL 269 OJ5148 CE, CUL, (CCC) 218 OU5044 CCC, CE, CUL 269 OJ5152 CE, CUL, (CCC) 250 OY001S CE, CUL, (CCC) 296 Product selectors and further information can be found at: www.ifm.com 40 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page OY002S CE, CUL, (CCC) 296 OY073S CE, CUL, (CCC) 306 OY003S CE, CUL, (CCC) 296 OY074S CE, CUL, (CCC) 306 306 OY004S CE, CUL, (CCC) 296 OY075S CE, CUL, (CCC) OY005S CE, CUL, (CCC) 296 OY076S CE, CUL, (CCC) 306 OY006S CE, CUL, (CCC) 296 OY077S CE, CUL, (CCC) 306 OY007S CE, CUL, (CCC) 296 OY078S CE, CUL, (CCC) 306 OY008S CE, CUL, (CCC) 296 OY079S CE, CUL, (CCC) 306 OY009S CE, CUL, (CCC) 296 OY080S CE, CUL, (CCC) 306 300 OY010S CE, CUL, (CCC) 296 OY082S CE, CUL, (CCC) OY031S CE, CUL, (CCC) 304 OY083S CE, CUL, (CCC) 300 OY032S CE, CUL, (CCC) 304 OY084S CE, CUL, (CCC) 301 OY033S CE, CUL, (CCC) 304 OY085S CE, CUL, (CCC) 301 OY034S CE, CUL, (CCC) 304 OY086S CE, CUL, (CCC) 301 OY035S CE, CUL, (CCC) 304 OY087S CE, CUL, (CCC) 301 OY036S CE, CUL, (CCC) 304 OY088S CE, CUL, (CCC) 301 OY037S CE, CUL, (CCC) 304 OY089S CE, CUL, (CCC) 301 OY038S CE, CUL, (CCC) 304 OY090S CE, CUL, (CCC) 301 OY039S CE, CUL, (CCC) 304 OY094S CE, CUL, (CCC) 306 306 OY040S CE, CUL, (CCC) 305 OY095S CE, CUL, (CCC) OY041S CE, CUL, (CCC) 297 OY096S CE, CUL, (CCC) 306 OY042S CE, CUL, (CCC) 297 OY097S CE, CUL, (CCC) 307 OY043S CE, CUL, (CCC) 297 OY098S CE, CUL, (CCC) 307 OY044S CE, CUL, (CCC) 297 OY099S CE, CUL, (CCC) 307 OY045S CE, CUL, (CCC) 297 OY100S CE, CUL, (CCC) 307 302 OY046S CE, CUL, (CCC) 298 OY104S CE, CUL, (CCC) OY047S CE, CUL, (CCC) 298 OY105S CE, CUL, (CCC) 302 OY048S CE, CUL, (CCC) 298 OY106S CE, CUL, (CCC) 302 OY049S CE, CUL, (CCC) 298 OY107S CE, CUL, (CCC) 302 OY050S CE, CUL, (CCC) 298 OY108S CE, CUL, (CCC) 302 OY051S CE, CUL, (CCC) 305 OY109S CE, CUL, (CCC) 302 OY052S CE, CUL, (CCC) 305 OY110S CE, CUL, (CCC) 302 OY053S CE, CUL, (CCC) 305 OY111S CE, CUL, (CCC) 307 OY054S CE, CUL, (CCC) 305 OY112S CE, CUL, (CCC) 307 OY055S CE, CUL, (CCC) 305 OY113S CE, CUL, (CCC) 307 303 OY056S CE, CUL, (CCC) 305 OY114S CE, CUL, (CCC) OY057S CE, CUL, (CCC) 305 OY115S CE, CUL, (CCC) 303 OY058S CE, CUL, (CCC) 305 OY116S CE, CUL, (CCC) 303 OY059S CE, CUL, (CCC) 305 OY120S CE, CUL, (CCC) 304 OY060S CE, CUL, (CCC) 305 OY121S CE, CUL, (CCC) 304 OY061S CE, CUL, (CCC) 299 OY122S CE, CUL, (CCC) 304 OY062S CE, CUL, (CCC) 299 OY204S CE, CUL, (CCC) 303 OY063S CE, CUL, (CCC) 299 OY205S CE, CUL, (CCC) 303 OY064S CE, CUL, (CCC) 299 OY206S CE, CUL, (CCC) 303 OY065S CE, CUL, (CCC) 299 OY207S CE, CUL, (CCC) 303 OY066S CE, CUL, (CCC) 299 OY208S CE, CUL, (CCC) 303 OY067S CE, CUL, (CCC) 299 OY209S CE, CUL, (CCC) 303 OY068S CE, CUL, (CCC) 299 OY210S CE, CUL, (CCC) 303 OY069S CE, CUL, (CCC) 299 OY221S CE, CUL, (CCC) 296 OY070S CE, CUL, (CCC) 299 OY222S CE, CUL, (CCC) 296 OY072S CE, CUL, (CCC) 306 OY223S CE, CUL, (CCC) 297 (CCC) = CCC approval is not required 41 Standards and approvals / list of articles Order no. Approvals Catalogue page OY224S CE, CUL, (CCC) 297 OY225S CE, CUL, (CCC) 297 OY226S CE, CUL, (CCC) 297 OY227S CE, CUL, (CCC) 297 OY228S CE, CUL, (CCC) 297 Order no. Approvals Catalogue page OY436S CE, (CCC) 309 OY437S CE, (CCC) 309 OY438S CE, (CCC) 309 OY439S CE, (CCC) 309 OY440S CE, (CCC) 309 OY229S CE, CUL, (CCC) 297 OY441S CE, (CCC) 308 OY230S CE, CUL, (CCC) 297 OY442S CE, (CCC) 308 OY241S CE, CUL, (CCC) 298 OY443S CE, (CCC) 308 OY242S CE, CUL, (CCC) 298 OY444S CE, (CCC) 308 OY243S CE, CUL, (CCC) 298 OY445S CE, (CCC) 308 OY244S CE, CUL, (CCC) 298 OY446S CE, (CCC) 308 OY245S CE, CUL, (CCC) 298 OY447S CE, (CCC) 308 OY246S CE, CUL, (CCC) 298 OY448S CE, (CCC) 308 OY247S CE, CUL, (CCC) 298 OY449S CE, (CCC) 308 OY248S CE, CUL, (CCC) 298 OY450S CE, (CCC) 308 OY249S CE, CUL, (CCC) 299 OY901S CE, (CCC) 310 OY250S CE, CUL, (CCC) 299 OY902S CE, (CCC) 310 OY261S CE, CUL, (CCC) 300 OY903S CE, (CCC) 310 OY262S CE, CUL, (CCC) 300 OY951S CE, (CCC) 310 OY263S CE, CUL, (CCC) 300 OY952S CE, (CCC) 310 OY264S CE, CUL, (CCC) 300 OY953S CE, (CCC) 310 OY265S CE, CUL, (CCC) 300 PA3020 CE, CUL 426, 543 OY266S CE, CUL, (CCC) 300 PA3021 CE, CUL 426, 543 OY267S CE, CUL, (CCC) 300 PA3022 CE, CUL 426, 543 OY268S CE, CUL, (CCC) 300 PA3023 CE, CUL 427, 543 OY269S CE, CUL, (CCC) 300 PA3024 CE, CUL 427, 543 OY270S CE, CUL, (CCC) 300 PA3026 CE, CUL 427 OY282S CE, CUL, (CCC) 301 PA3027 CE, CUL 427 OY283S CE, CUL, (CCC) 301 PA3028 CE, CUL 375, 427 OY284S CE, CUL, (CCC) 301 PA3029 CE, CUL 427 OY285S CE, CUL, (CCC) 301 PA3060 CE 426, 543 OY286S CE, CUL, (CCC) 301 PA3521 CE 427 OY287S CE, CUL, (CCC) 301 PA3523 CE, CUL 427 OY288S CE, CUL, (CCC) 302 PA3524 CE, CUL 427 OY289S CE, CUL, (CCC) 302 PA3526 CE 427 OY290S CE, CUL, (CCC) 302 PA3528 CE, CUL 427 OY403S CE, (CCC) 307 PA9020 CE 427, 543 OY405S CE, (CCC) 307 PA9021 CE 427, 543 OY407S CE, (CCC) 307 PA9022 CE, CUL 427, 543 OY411S CE, (CCC) 310 PA9023 CE, CUL 428, 544 OY412S CE, (CCC) 310 PA9024 CE, CUL 428, 544 OY413S CE, (CCC) 310 PA9026 CE, CUL 428 OY421S CE, (CCC) 308 PA9027 CE, CUL 428 OY422S CE, (CCC) 308 PA9028 CE, CUL 428 OY423S CE, (CCC) 309 PA9029 CE, CUL 428 OY431S CE, (CCC) 309 PA9060 CE 427 OY432S CE, (CCC) 309 PE3000 CE, CUL 436 OY433S CE, (CCC) 309 PE3001 CE, CUL 436 OY434S CE, (CCC) 309 PE3002 CE, CUL 436 OY435S CE, (CCC) 309 PE3003 CE, CUL 436 Product selectors and further information can be found at: www.ifm.com 42 Standards and approvals / list of articles Order no. Approvals Catalogue page PE3004 CE, CUL 437 PE3006 CE, CUL 437 Order no. Approvals Catalogue page PG2898 CE, CUL, EHEDG 376, 433 PG2899 CE, CUL, EHEDG 376, 433 429 PE3009 CE, CUL 437 PI003A CE, FDA PE3029 CE, CUL 437 PI008A CE, FDA 430 PE7002 CE, CUL 436 PI2789 CE, CUL, EHEDG, FDA 375, 431 PE7003 CE, CUL 436 PI2793 CE, CUL, EHEDG, FDA 431 PE7004 CE, CUL 436 PI2794 CE, CUL, EHEDG, FDA 431 PE7006 CE, CUL 436 PI2795 CE, CUL, EHEDG, FDA 431 PE7009 CE, CUL 436 PI2796 CE, CUL, EHEDG, FDA 375, 431 PF2053 CE, CUL, EHEDG, FDA 433 PI2797 CE, CUL, EHEDG, FDA 375, 431 PF2054 CE, CUL, EHEDG, FDA 433 PI2798 CE, CUL, EHEDG, FDA 375, 431 PF2056 CE, CUL, EHEDG, FDA 433 PI2799 CE, CUL, EHEDG, FDA 375, 431 PF2057 CE, CUL, EHEDG, FDA 433 PI2889 CE, CUL 375, 432 PF2058 CE, CUL, EHEDG, FDA 433 PI2893 CE, CUL 431 PF2609 CE, CUL, EHEDG, FDA 434 PI2894 CE, CUL 431 PF2652 CE, CUL, EHEDG, FDA 433 PI2895 CE, CUL 431 PF2653 CE, CUL, EHEDG, FDA 434 PI2896 CE, CUL 375, 431 PF2654 CE, CUL, EHEDG, FDA 434 PI2897 CE, CUL 376, 432 PF2656 CE, CUL, EHEDG, FDA 434 PI2898 CE, CUL 376, 432 PF2657 CE, CUL, EHEDG, FDA 434 PI2899 CE, CUL 376, 432 PF2658 CE, CUL, EHEDG, FDA 434 PI2994 CE, CUL, FDA 430 PF2953 CE, CUL, FDA 434 PI7993 CE, CUL, FDA 431 PF2954 CE, CUL, FDA 434 PK5520 CE, CUL 422 PF2956 CE, CUL, FDA 434 PK5521 CE, CUL 422 422 PF2957 CE, CUL, FDA 434 PK5522 CE, CUL PG2409 CE, CUL 422 PK5523 CE, CUL 422 PG2450 CE 421 PK5524 CE, CUL 422 PG2451 CE, CUL 421 PK6220 CE, CUL 424 PG2452 CE, CUL 421 PK6222 CE, CUL 424 PG2453 CE, CUL 422 PK6224 CE, CUL 424 PG2454 CE, CUL 422 PK6520 CE, CUL 423 PG2455 CE, CUL 422 PK6521 CE, CUL 423 PG2456 CE, CUL 422 PK6522 CE, CUL 423 PG2457 CE, CUL 422 PK6523 CE, CUL 423 423 PG2458 CE, CUL 422 PK6524 CE, CUL PG2489 CE, CUL 422 PK6732 CE, CUL 423 PG2789 CE, EHEDG, FDA 376, 432 PK6734 CE, CUL 423 PG2793 CE, CUL, EHEDG, FDA 432 PK7520 CE, CUL 423 PG2794 CE, CUL, EHEDG, FDA 432 PK7521 CE, CUL 423 PG2795 CE, CUL, EHEDG, FDA 432 PK7522 CE, CUL 423 PG2796 CE, CUL, EHEDG, FDA 376, 432 PK7524 CE, CUL 423 PG2797 CE, CUL, EHEDG, FDA 376, 432 PK8730 CE, CUL 423 PG2798 CE, CUL, EHEDG, FDA 376, 432 PK8732 CE, CUL 423 PG2799 CE, CUL, EHEDG, FDA 376, 432 PK8734 CE, CUL 423 PG2889 CE, CUL, EHEDG 376, 433 PL2053 CE, CUL, EHEDG, FDA 434 PG2893 CE, CUL, EHEDG 432 PL2054 CE, CUL, EHEDG, FDA 434 PG2894 CE, CUL, EHEDG 433 PL2056 CE, CUL, EHEDG, FDA 434 PG2895 CE, CUL, EHEDG 433 PL2057 CE, CUL, EHEDG, FDA 434 PG2896 CE, CUL, EHEDG 376, 433 PL2058 CE, CUL, EHEDG, FDA 435 PG2897 CE, CUL, EHEDG 376, 433 PL2652 CE, CUL, EHEDG, FDA 435 (CCC) = CCC approval is not required 43 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page PL2653 CE, CUL, EHEDG, FDA 435 PL2654 CE, CUL, EHEDG, FDA 435 PN5006 CE, CUL 420 PN5007 CE, CUL 420 PL2656 CE, CUL, EHEDG, FDA PL2657 CE, CUL, EHEDG, FDA 435 PN5200 CE, CUL 420 435 PN5202 CE, CUL PL2658 CE, CUL, EHEDG, FDA 420 435 PN5204 CE, CUL 420 PM2053 CE, CUL, EHEDG, FDA 435 PN7000 CE, CUL 420 PM2054 CE, CUL, EHEDG, FDA 435 PN7001 CE, CUL 420 PM2055 CE, CUL, EHEDG, FDA 435 PN7002 CE, CUL 420 420 PM2056 CE, CUL, EHEDG, FDA 435 PN7003 CE, CUL PM2057 CCSAUS, CE, CUL, EHEDG, FDA 435 PN7004 CE, CUL 420 PM2058 CE, CUL, EHEDG, FDA 435 PN7006 CE, CUL 421 PM2653 CE, CUL, EHEDG, FDA 435 PN7007 CE, CUL 421 PM2654 CE, CUL, EHEDG, FDA 435 PN7009 CE, CUL 421 PM2655 CE, CUL, EHEDG, FDA 436 PN7060 CE 420 PM2656 CE, CUL, EHEDG, FDA 436 PN7200 CE, CUL 421 PM2657 CE, CUL, EHEDG, FDA 436 PN7201 CE, CUL 421 PM2658 CE, CUL, EHEDG, FDA 436 PN7202 CE, CUL 421 PN006A CE 429 PN7203 CE, CUL 421 PN016A CE 429 PN7204 CE, CUL 421 PN2009 CE, CUL 418 PN7206 CE, CUL 421 PN2020 CE, CUL 418 PN7209 CE, CUL 421 PN2021 CE, CUL 418 PN7809 CE, CUL 430 PN2022 CE, CUL 418 PN7834 CE, CUL 430 PN2023 CE, CUL 418 PNI024 CE 429 PN2024 CE, CUL 418 PP000E CE, E1 544 PN2026 CE, CUL 418 PP001E CE, E1 544 PN2027 CE, CUL 418 PP002E CE, E1 544 PN2028 CE, CUL 418 PP003E CE, E1 544 PN2209 CE, CUL 418 PP004E CE, E1 544 PN2220 CE, CUL 418 PP0520 CE 425 PN2221 CE, CUL 418 PP0521 CE 425 PN2222 CE, CUL 418 PP0522 CE, CUL 425 PN2223 CE, CUL 418 PP0523 CE, CUL 425 PN2224 CE, CUL 419 PP0524 CE, CUL 425 PN2226 CE, CUL 419 PP2001 CE, CUL 438, 550 PN2228 CE, CUL 419 PP7550 CE 425, 543 PN3000 CE, CUL 419 PP7551 CE 425, 543 PN3001 CE, CUL 419 PP7552 CE, CUL 425, 543 PN3002 CE, CUL 419 PP7553 CE, CUL 425, 543 425, 543 PN3003 CE, CUL 419 PP7554 CE, CUL PN3004 CE, CUL 419 PP7556 CE, CUL 425 PN3006 CE, CUL 419 PPA020 CE 428, 495 PN3007 CE, CUL 419 PPA024 CE, CUL 495 PN3029 CE, CUL 419 PQ0809 CE, CUL 430 PN3060 CE 419 PQ0834 CE, CUL 430 PN5000 CE, CUL 419 PQ7809 CE, CUL 430 PN5001 CE, CUL 420 PQ7834 CE, CUL 430 PN5002 CE, CUL 420 PS307A CE, GL, IEC 375, 429 PN5003 CE, CUL 420 PS308A CE, GL, IEC 375, 429 PN5004 CE, CUL 420 PS317A CE, GL, IEC 375, 429 Product selectors and further information can be found at: www.ifm.com 44 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page PS3208 CE PS3407 CE 374, 428 RM3005 CE, C_NRTL_US 339 374, 428 RM6101 CE, C_NRTL_US 339 339 PS3417 CE 374, 428 RM6104 CE, C_NRTL_US PS7570 CE 428 RM7003 CE, C_NRTL_US 339 PT3540 CE, CUL 424 RM7004 CE, C_NRTL_US 340 PT3541 CE, CUL 424 RM9000 CE, E1, (CCC) 340, 542 PT3542 CE, CUL 424 RN6055 CE, C_NRTL_US 338 PT3543 CE, CUL 424 RN7003 CE, C_NRTL_US 339 339 PT3544 CE, CUL 424 RN7004 CE, C_NRTL_US PT3550 CE, CUL 425, 544 RO6342 CE, C_NRTL_US 338 PT3551 CE, CUL 426, 544 RO6343 CE, C_NRTL_US 338 PT3552 CE, CUL 426, 544 RO6344 CE, C_NRTL_US 338 PT3553 CE, CUL 426, 544 RO6345 CE, C_NRTL_US 338 PT3554 CE, CUL 426, 544 RO6348 CE, C_NRTL_US 338 PT9540 CE, CUL 424 RO6349 CE, C_NRTL_US 338 PT9541 CE, CUL 424 RO6350 CE, C_NRTL_US 338 PT9542 CE, CUL 424 RU1016 CE, C_NRTL_US 335 PT9543 CE, CUL 424 RU1024 CE, C_NRTL_US 335 335 PT9544 CE, CUL 424 RU1025 CE, C_NRTL_US PT9550 CE, CUL 426, 544 RU1033 CE, C_NRTL_US 335 PT9551 CE, CUL 426, 544 RU1036 CE, C_NRTL_US 335 PT9552 CE, CUL 426, 545 RU6003 CE, C_NRTL_US 335 PT9553 CE, CUL 426, 545 RU6010 CE, C_NRTL_US 335 PT9554 CE, CUL 426, 545 RU6013 CE, C_NRTL_US 335 335 PY2068 CE, CUL 418 RU6016 CE, C_NRTL_US RA6001 CE, C_NRTL_US 337 RU6024 CE, C_NRTL_US 335 RA6007 CE, C_NRTL_US 337 RU6025 CE, C_NRTL_US 335 RA6011 CE, C_NRTL_US 337 RU6033 CE, C_NRTL_US 335 RA6013 CE, C_NRTL_US 337 RU6036 CE, C_NRTL_US 336 RA6015 CE, C_NRTL_US 338 RU6040 CE, C_NRTL_US 336 RA6029 CE, C_NRTL_US 338 RU6045 CE, C_NRTL_US 336 RB1015 CE, C_NRTL_US 334 RU6052 CE, C_NRTL_US 336 RB6001 CE, C_NRTL_US 334 RV1016 CE, C_NRTL_US 336 RB6002 CE, C_NRTL_US 334 RV1024 CE, C_NRTL_US 336 336 RB6003 CE, C_NRTL_US 334 RV1025 CE, C_NRTL_US RB6004 CE, C_NRTL_US 334 RV1033 CE, C_NRTL_US 336 RB6005 CE, C_NRTL_US 334 RV1036 CE, C_NRTL_US 336 RB6006 CE, C_NRTL_US 334 RV1051 CE, C_NRTL_US 336 RB6007 CE, C_NRTL_US 334 RV6001 CE, C_NRTL_US 336 RB6009 CE, C_NRTL_US 334 RV6003 CE, C_NRTL_US 336 RB6010 CE, C_NRTL_US 334 RV6009 CE, C_NRTL_US 336 RB6011 CE, C_NRTL_US 334 RV6010 CE, C_NRTL_US 336 RB6012 CE, C_NRTL_US 334 RV6013 CE, C_NRTL_US 336 RB6013 CE, C_NRTL_US 334 RV6016 CE, C_NRTL_US 337 RB6014 CE, C_NRTL_US 334 RV6018 CE, C_NRTL_US 337 RB6015 CE, C_NRTL_US 335 RV6024 CE, C_NRTL_US 337 RB6016 CE, C_NRTL_US 335 RV6025 CE, C_NRTL_US 337 RB6029 CE, C_NRTL_US 335 RV6028 CE, C_NRTL_US 337 RB6044 CE, C_NRTL_US 334 RV6033 CE, C_NRTL_US 337 RM3001 CE, C_NRTL_US 339 RV6034 CE, C_NRTL_US 337 (CCC) = CCC approval is not required 45 Standards and approvals / list of articles Order no. Approvals Catalogue page Order no. Approvals Catalogue page RV6036 CE, C_NRTL_US 337 RV6040 CE, C_NRTL_US 337 SF5800 CUL 396 SF6200 CUL 395 RV6100 CE, C_NRTL_US SA3010 CE 337 SF6201 CUL 395 393 SF620A CE SBU323 CE, CUL 399 394 SI0553 CE 393 SBU324 CE, CUL 394 SI5000 CE, CUL 392 SBU325 CE, CUL 394 SI5002 CE, CUL 392 SBU623 CE, CUL 394 SI5004 CE, CUL 392 392 SBU624 CE, CUL 394 SI5006 CE, CUL SBU625 CE, CUL 395 SI5007 CE, CUL 393 SBY323 CE 395 SI500A CE 394 SBY332 CE, CUL 395 SI5010 CE, CUL 392 SBY333 CE, CUL 395 SI5100 CE 393 SBY334 CE, CUL 395 SI6600 CE, CUL, EHEDG, FDA 394 SBY346 CE, CUL 395 SI6700 CE, CUL, EHEDG, FDA 394 SBY357 CE, CUL 395 SI6800 CE, CUL, EHEDG, FDA 394 SD2000 CE, CUL 401 SL0101 CE 400 SD5000 CE, CUL 401 SL0201 CE 400 SD5100 CE, CUL 401 SL5101 CE 400 SD6000 CE, CUL 401 SM6000 CE, CUL 391 SD6050 CE, CUL 401 SM6004 CE, CUL 391 SD6100 CE, CUL 401 SM6050 CE, CUL 392 SD8000 CE, CUL 401 SM6100 CE, CUL, KTW 391 SD9000 CE, CUL 401 SM7000 CE, CUL 391 SF0516 CUL 397 SM7004 CE, CUL 391 397 SM7050 CE, CUL 392 CE 398 SM7100 CE, CUL, KTW 391 SF120A CE 399 SM8000 CE, CUL 391 SF121A CE 398 SM8004 CE, CUL 391 SF211A CE 398 SM8050 CE, CUL 392 SF220A CE 399 SM8100 CE, CUL, KTW 391 SF221A CE 399 SN0150 CE, CUL 397 SF223A CE 399 SN0151 CE, CUL 398 SF2405 CUL 397 SN2301 CE, IEC 400 400 SF0540 SF111A SF2410 CUL 397 SN2302 CE, IEC SF311A CE 398 SQ0500 CE, CUL 401 SF320A CE, IEC 399 SR0150 CE, CUL 398 SF321A CE, IEC 399 SR0153 CE, CUL 398 SF323A CE 399 SR2301 CE, IEC 400 SF3405 397 SR5900 CE, CUL 398 SF3410 397 SR5906 CE, CUL 398 SF5200 CUL 396 SU7000 CE, CUL 402 SF5201 CUL 396 SU7200 CE, CUL 402 SF5300 CUL 396 SU8000 CE, CUL 402 SF5350 CUL 396 SU8200 CE, CUL 402 SF5700 CUL 396 SU9000 CE, CUL 402 SF5701 CUL 396 SU9004 CE, CUL 402 SF5702 CUL 396 TA3130 CE, CUL 459 SF5703 CUL 396 TA3131 CE, CUL 459 SF5704 CUL 396 TA3171 CE, CUL 459 Product selectors and further information can be found at: www.ifm.com 46 Standards and approvals / list of articles Order no. Approvals Catalogue page TA3231 CE, CUL 462 TA3233 CE, CUL 462 Order no. Approvals Catalogue page TR2432 CE, CUL 455 TR7432 CE, CUL 455 CE, CUL 454 CUL 458, 461 TA3237 CE, CUL 462 TR8430 TA3333 CE, CUL 459 TS0759 TA3337 CE, CUL 459 TS2051 TA3430 CE, CUL, EHEDG 462 TS2056 458, 461 TA3431 CE, CUL, EHEDG 462 TS2229 458 TA3437 CE, EHEDG 462 TS2251 458 458 TAA131 CE, CUL 460 TS2256 458 TAA431 CE, CUL, EHEDG 462 TS2659 458 TAD181 CE, CUL, EHEDG 462 TS2759 458 TAD191 CE, CUL, EHEDG 462 TS2789 TAD981 CE, CUL, EHEDG 462 TS325A TAD991 CE, CUL, EHEDG 463 TS4759 TK6130 CE, CUL 454 TK6330 CE, CUL TK7130 CE, CUL TK7330 CE, CUL 454 TS9281 458 CE 459 TS502A CE 459 454 TS5051 CUL 458, 461 454 TS522A CE 459 457 458 TK7480 CE, CUL 454 TT0281 CUL TM4101 CUL 457 TT0291 CUL 456 460 TM4311 CUL 457 TT1050 CUL 455 TM4331 CUL 457 TT1081 CUL 456 TM4341 CUL 457 TT1281 CUL 456 TM4361 CUL 457 TT1291 CUL 460 456 TM4411 CUL 457 TT2050 CUL TM4431 CUL 457 TT2081 CUL 456 TM4441 CUL 457 TT2281 CUL 456 TM4461 CUL 457 TT2291 CUL 460 TM4501 CUL 461 TT3050 CUL 456 TM4511 CUL 461 TT3081 CUL 456 TM4531 CUL 461 TT3281 CUL 456 TM4541 CUL 461 TT3291 CUL 460 TM4591 CUL 461 TT5050 CUL 456 TM4801 CUL 460 TT5081 CUL 456 456 TM4811 CUL 460 TT9281 CUL TM4831 CUL 460 TT9291 CUL 460 TM4841 CUL 460 VB1001 CE, CUL 476 TM4901 CUL 461 VE1001 CE, CUL 476 TM4911 CUL 461 VE1101 CE, CUL 476 TM4931 CUL 461 VE1103 CE, CUL 476 TM4941 CUL 461 VE113A CE, IEC 476 TM9900 CUL 457 VES001 TM9950 CUL 456 VES003 TN2531 CE, CUL 454 VKV021 CE, CUL 477 TN7531 CE, CUL 454 VKV022 CE, CUL 477 TP3231 CE, CUL 455 VOS001 477 TP3232 CE, CUL 455 VOS002 478 TP3233 CE, CUL 455 VOS003 478 TP3237 CE, CUL 455 VOS004 TP9237 CE, CUL 455 VSA001 476 477 478 CE, CUL 478 (CCC) = CCC approval is not required 47 Standards and approvals / list of articles Order no. Approvals Catalogue page VSA002 CE, CUL 478 VSA004 CE, CUL 478 VSA005 CE, CUL 478 VSE002 CE, CUL 477 VSE100 CE, CUL 477 VTV122 CE, CUL 477 ZZ0214 CE, (CCC) 192 Product selectors and further information can be found at: www.ifm.com 48 Standards and approvals / list of articles (CCC) = CCC approval is not required 49 Sensors for special applications AS-Interface AS-interface (actuator sensor interface) is a worldwide manufacturer-independent standard for the connection of actuators and sensors of the first field level. Data and power supply are jointly transmitted via a two-wire cable. Wiring complexity, documentation and set-up times are reduced. ATEX ATEX (Atmosphère explosible) is a brief description of the uniform EU directives 94/9/EC (for manufactures of units for hazardous areas) and 1999/92/EC (for operators of plants for hazardous areas) governing the safety requirements for explosion-hazardous areas. Since 30 June 2003, units for hazardous areas have to be approved to 94/9/EU regulations. For further information about international directives see the “Approvals“ chapter. e1 type approval The e1 type approval by the German Federal Motor Transport Authority certifies that the units comply with the automotive standards. IO-Link IO-Link is a field-bus independent and open point-to-point communication interface. It is a low-cost possibility to transmit parameter, diagnosis and process data from a sensor or an actuator via an I/O module. Safety The EC Machinery Directive stipulates machinery should not present a risk. If safety is dependent on control systems, these must be designed so as to minimise malfunction. The IEC 62061 und ISO 13849-1 standards apply. Classification is made either in the Safety Integrity Level (SIL 1-3 in IEC 62061) or in the Performance Level (PL a-e in ISO 13849-1). Product selectors and further information can be found at: www.ifm.com 50 Sensors for special applications AS-i sensors Page AS-i sensors 495 - 496 Valve sensors 189 - 189 192 - 192 Temperature sensors Sensors for hazardous areas (ATEX) 460 Page Inductive sensors 107 - 109 Capacitive sensors 144 - 145 Cylinder sensor 173 - 174 Valve sensors 190 - 191 Photoelectric sensors 222 - 223 Flow sensors 394 - 394 398 - 399 Pressure sensors 375 - 375 429 - 430 Temperature sensors 459 - 459 Diagnostic systems Sensors with e1 approval Inductive sensors 476 Page 540 - 542 Product selectors and further information can be found at: www.ifm.com 51 Sensors for special applications Sensors with e1 approval Pressure sensors Sensors with IO-Link Pressure sensors Temperature sensors Sensors for safety technology 543 - 545 Page 425 454 - 455 462 - 463 Page Inductive sensors 105 - 106 Safety light curtains 296 - 309 Safety light grid 303 - 304 307 - 310 Product selectors and further information can be found at: www.ifm.com 52 Page Sensors for special applications Product selectors and further information can be found at: www.ifm.com 53 Inductive sensors Sensors for almost all application areas. Wide choice of housing styles and operating voltages. High-quality housing materials. Cylindrical housings: Ø 3…34 mm, rectangular housings: 5 x 5 x 24 to 105 x 80 x 40. Extensive range of fixing accessories and connection technology. Inductive sensors In all automated processes sensors are absolutely necessary to provide the PLC with information. They supply the necessary signals on positions, limits or serve as pulse pick-ups for counting tasks or for monitoring rotational speed. Inductive and capacitive sensors are nowadays indispensable for industrial usage. As compared to mechanical switches they offer ideal conditions: non-contact operation free from any wear and tear, high switching frequencies and accuracy. In addition, they are insensitive to vibration, dust and moisture. Inductive sensors detect all metals without contact. Operating principle of inductive sensors Inductive sensors take advantage of the physical effect of the change in the quality factor in a resonant circuit caused by eddy current losses in conductive materials. This is how it works: An LC tuned circuit generates a high frequency electromagnetic field. This field is radiated from the active face of the sensor. If a conductive material enters this field, eddy currents will be formed in accordance with the law of inductance which draw energy from the oscillator. This reduces the oscillation amplitude. The change is converted into a switching signal. The operating principle permits detection of all metals irrespective of whether they are moving or not. Typical application: Positioning sensing in automation technology; inductive sensors operate reliably and without wear. Application sensors Every application has its own requirements as regards the sensors to be used. Temperature shocks, mechanical influences or aggressive cleaning agents are just a few of the possible environmental influences to which sensors are subjected. ifm electronic therefore offers inductive sensors which have been developed for special applications. This includes for example the use of selected housing materials such as stainless steel, LCP, PEEK, PBT or Duroplast. An innovative, consistent sealing concept from the sensor to the connector ensures ideal protection against ingress of moisture and aggressive media. 54 High frequency electromagnetic field: The inductive sensor detects all metals. Inductive sensors System overview Page Sensors with increased sensing range for industrial applications 57 - 59 Sensors for industrial applications, threaded housings 59 - 66 Sensors with analogue output 4...20 mA for industrial applications 66 - 67 Sensors with analogue output 0...10 V for industrial applications 67 Sensors with smooth sleeve for industrial applications 68 - 70 Sensors for industrial applications, rectangular housings 70 - 75 Ring sensors for industrial applications 75 - 76 Tube sensors for industrial applications 77 Sensors for industrial applications, AC and AC/DC 78 - 80 Sensors for hygienic and wet areas with increased sensing range 81 - 84 Full metal sensors for hygienic and wet areas 84 - 85 Sensors for hygienic and wet areas 85 - 87 Sensors for oils and coolants with increased sensing range 87 - 91 Full metal sensors for oils and coolants 91 - 92 Full metal sensors for oils and coolants with correction factor K = 0 92 - 93 Sensors for oils and coolants with correction factor K = 1 93 - 94 Sensors for oils and coolants with ceramic sensing face 94 - 95 Sensors for oils and coolants, AS-i system Sensors for oils and coolants, threaded housings Sensors for oils and coolants, rectangular housings Full metal sensors with non-stick coating against weld spatter 95 95 - 97 97 98 - 100 Electromagnetic field immune sensors with correction factor K = 1 100 - 101 Electromagnetic field immune sensors 101 - 102 Sensors for mobile applications 102 - 105 Fail-safe inductive sensors for series connection to IEC 62061 SILcl 3 and ISO 13849-1 PL e 105 Inductive sensors for safety-related applications, 2 x OSSD, SIL 2, PL d 106 Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e 106 Safety relays with relay outputs for fail-safe sensors 107 Safety relays with solid state outputs for fail-safe sensors 107 Sensors with ATEX approval 1D / 2G 107 - 108 Slot sensors for industrial applications 108 - 109 55 Inductive sensors System overview Switching amplifiers with ATEX approval Accessories for sensors with smooth sleeve Page 109 109 - 110 Accessories for threaded M8 housings 110 Accessories for threaded M12 housings 111 Accessories for threaded M18 housings 111 - 112 Accessories for threaded M30 housings 112 Accessories for rectangular housings 112 System components 113 - 114 Wiring diagrams 114 - 116 Scale drawings / drawing no. – CAD download: www.ifm.com 116 - 135 Product selectors and further information can be found at: www.ifm.com 56 Inductive sensors Sensors with increased sensing range for industrial applications Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 45 4f brass 10...36 IP 67 700 100 1 IFS204 M12 / L = 50 7 nf brass 10...36 IP 67 700 100 2 IFS205 M12 / L = 70 4f brass 10...36 IP 67 700 100 3 IFS212 M12 / L = 70 7 nf brass 10...36 IP 67 700 100 4 IFS213 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 45 4f brass 10...36 IP 67 700 100 1 IFS206 M12 / L = 50 7 nf brass 10...36 IP 67 700 100 2 IFS207 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M12 / L = 70 4f brass 10...30 IP 67 500 100 3 IFS208 M12 / L = 70 7 nf brass 10...30 IP 67 500 100 4 IFS209 M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 32 · Connector groups 9, 11, 107, 108, 135 M12 / L = 45 4f brass 10...30 IP 67 700 100 1 IFS200 M12 / L = 50 7 nf brass 10...30 IP 67 700 100 2 IFS201 M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 M12 / L = 46 4f brass 10...36 IP 67 700 100 5 IFS210 M12 / L = 51 7 nf brass 10...36 IP 67 700 100 6 IFS211 You can find wiring diagrams and scale drawings from page 114 57 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 46 8f brass 10...36 IP 67 400 100 7 IGS204 M18 / L = 51 12 nf brass 10...36 IP 67 300 100 8 IGS205 M18 / L = 70 8f brass 10...36 IP 67 400 100 9 IGS212 M18 / L = 70 12 nf brass 10...36 IP 67 300 100 10 IGS213 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 46 8f brass 10...36 IP 67 400 100 7 IGS206 M18 / L = 51 12 nf brass 10...36 IP 67 300 100 8 IGS207 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M18 / L = 70 8f brass 10...30 IP 67 400 100 9 IGS208 M18 / L = 70 12 nf brass 10...30 IP 67 300 100 10 IGS209 M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 32 · Connector groups 9, 11, 107, 108, 135 M18 / L = 46 8f brass 10...30 IP 67 300 100 7 IGS200 M18 / L = 51 12 nf brass 10...30 IP 67 250 100 8 IGS201 M12 connector · Output function 135 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 108, M18 / L = 70 8f brass 10...36 IP 68 400 100 11 IG5953 M18 / L = 72 12 nf brass 10...36 IP 67 250 100 12 IG5954 Product selectors and further information can be found at: www.ifm.com 58 Inductive sensors Type Dimensions Sensing range [mm] [mm] M8 connector · Output function M18 / L = 46 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. 13 IGS210 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 8f M12 connector · Output function 110, 135, 136 brass 10...36 IP 67 400 100 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M30 / L = 50 15 f brass 10...36 IP 67 100 100 14 IIS204 M30 / L = 50 22 nf brass 10...36 IP 67 100 100 15 IIS205 M30 / L = 70 15 f high-grade st. steel 10...36 IP 67 100 100 16 IIS210 M30 / L = 70 22 nf high-grade st. steel 10...36 IP 67 100 100 17 IIS211 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M30 / L = 50 15 f brass 10...36 IP 67 100 100 14 IIS208 M30 / L = 50 22 nf brass 10...36 IP 67 100 100 15 IIS209 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M30 / L = 70 15 f brass 10...36 IP 67 100 100 16 IIS206 M30 / L = 70 22 nf brass 10...36 IP 67 100 100 17 IIS207 Protection f Iload Drawing no. Order no. [Hz] [mA] 2000 100 18 IY5029 f = flush / nf = non flush Sensors for industrial applications, threaded housings Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M5 / L = 30 Material Ub [V] · 3-wire · DC PNP · Wiring diagram no. 3 0.8 f stainless steel 10...36 IP 65 You can find wiring diagrams and scale drawings from page 114 59 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 3 M5 / L = 23 0.8 f stainless steel 10...30 IP 65 2000 100 19 IY5051 M5 / L = 23 1.2 f stainless steel 10...30 IP 65 < 2000 100 19 IY5052 M5 / L = 27 1.5 nf stainless steel 10...30 IP 67 1800 100 20 IY5049 M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 M5 / L = 45 0.8 f stainless steel 10...36 IP 65 2000 100 21 IY5036 M5 / L = 41 1.5 nf stainless steel 10...30 IP 67 1800 100 22 IY5048 Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 M8 / L = 35 1f brass 10...36 IP 67 750 200 23 IE5072 M8 / L = 50 1f brass 10...36 IP 67 750 200 24 IE5121 M8 / L = 50 1f PBT 10...36 IP 67 1000 200 24 IE5129 M8 / L = 20 1.5 f stainless steel 10...30 IP 67 4000 200 25 IE5348 M8 / L = 27 2f high-grade st. steel 10...30 IP 67 1500 100 26 IE5368 M8 / L = 35 2 nf PBT 10...36 IP 67 800 200 23 IE5099 M8 / L = 27 4 nf high-grade st. steel 10...30 IP 67 500 100 27 IE5369 2000 200 24 IE5222 Cable 2 m · Output function M8 / L = 50 · 2-wire · DC PNP/NPN · Wiring diagram no. 34 1f brass 5...36 IP 67 Product selectors and further information can be found at: www.ifm.com 60 f Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 34 M8 / L = 50 2 nf brass 5...36 IP 67 2700 200 28 IE5238 M8 / L = 50 2 nf PBT (Pocan) 5...36 IP 67 2000 200 24 IE5202 Cable 2 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 M8 / L = 37 3f brass 10...30 IP 67 1000 100 29 IE5343 M8 / L = 37 5 nf brass 10...30 IP 67 700 100 30 IE5345 Cable with connector 0.3 m · Output function Connector groups 1, 2, 3, 68 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · M8 / L = 37 3f brass 10...30 IP 67 1000 100 29 IE5344 M8 / L = 37 5 nf brass 10...30 IP 67 700 100 30 IE5346 Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M8 / L = 37 3f brass 10...30 IP 67 1000 100 29 IE5351 M8 / L = 37 5 nf brass 10...30 IP 67 700 100 30 IE5352 M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 M8 / L = 50 2f brass 10...36 IP 67 1000 250 31 IE5287 M8 / L = 30 2f high-grade st. steel 10...30 IP 67 / 1500 100 32 IE5366 M8 / L = 30 4 nf high-grade st. steel 10...30 IP 67 700 100 33 IE5367 34 IE5258 M8 connector · Output function M8 / L = 50 · 3-wire · DC PNP · Wiring diagram no. 4 · Connector groups 1, 2, 3, 68 1f brass 10...36 IP 65 > 2000 250 You can find wiring diagrams and scale drawings from page 114 61 Inductive sensors Type Dimensions Sensing range [mm] [mm] M8 connector · Output function 2, 3, 68 Material Ub Protection [V] Iload [Hz] [mA] Drawing no. Order no. · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 1, M8 / L = 40 3f brass 10...30 IP 67 1000 100 35 IE5338 M8 / L = 40 5 nf high-grade st. steel 10...30 IP 67 700 100 36 IE5340 M8 connector · Output function 2, 3, 68 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 36 · Connector groups 1, M8 / L = 40 3f brass 10...30 IP 67 1000 100 37 IE5349 M8 / L = 40 5 nf high-grade st. steel 10...30 IP 67 700 100 36 IE5350 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M8 / L = 53 1f brass 10...36 IP 67 750 200 38 IE5090 M8 / L = 62 2f brass 10...36 IP 67 1000 250 39 IE5312 M8 / L = 50 2f high-grade st. steel 10...36 IP 68 1000 100 40 IE5379 M8 / L = 62 4 nf brass 10...36 IP 67 300 200 41 IE5288 M12 connector · Output function 110, 135, 136 M8 / L = 62 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 2f M12 connector · Output function 135 M8 / L = 69 brass 10...36 IP 67 800 250 42 IE5327 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 108, 1f M12 connector · Output function 110, 135, 136 brass 5...36 IP 67 2700 200 43 IE5203 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 45 2f brass 10...36 IP 67 700 100 1 IFS214 M12 / L = 70 2f brass 10...36 IP 67 700 100 3 IFS216 Product selectors and further information can be found at: www.ifm.com 62 f Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 50 4 nf brass 10...36 IP 67 700 100 2 IFS215 M12 / L = 70 4 nf brass 10...36 IP 67 700 100 4 IFS217 Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 M12 / L = 35 2f brass 10...36 IP 67 1500 150 44 IF5188 M12 / L = 71 2f brass 10...55 IP 67 800 250 45 IF5297 M12 / L = 71 2f PBT 10...55 IP 67 800 250 45 IF5313 M12 / L = 35 4 nf brass 10...36 IP 67 1500 150 46 IF5249 M12 / L = 71 4 nf brass 10...36 IP 67 1500 250 47 IF5329 M12 / L = 71 4 nf PBT 10...36 IP 67 400 250 45 IF5345 Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 34 M12 / L = 71 2f brass 10...55 IP 67 1100 400 45 IF5645 M12 / L = 71 2f PBT 10...55 IP 67 1100 400 45 IF5644 M12 / L = 71 4 nf brass 10...55 IP 67 1500 400 47 IF5646 M12 / L = 71 4 nf PBT 10...55 IP 67 1500 400 45 IF5597 M12 connector · Output function 108, 135 M12 / L = 83 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 2f brass 10...55 IP 67 1100 300 48 IF5598 You can find wiring diagrams and scale drawings from page 114 63 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 108, 135 M12 / L = 83 Material Ub Protection [V] Iload [Hz] [mA] Drawing no. Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 4 nf M12 connector · Output function 110, 135, 136 brass 10...55 IP 67 1500 300 49 IF5647 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 46 5f brass 10...36 IP 67 400 100 7 IGS214 M18 / L = 70 5f brass 10...36 IP 67 400 100 9 IGS216 M18 / L = 70 8 nf brass 10...36 IP 67 300 100 10 IGS217 Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 M18 / L = 38 5f brass 18...36 IP 67 500 150 50 IG5221 M18 / L = 80 5f brass 10...36 IP 67 500 250 51 IG5397 M18 / L = 80 5f PBT 10...36 IP 67 500 250 51 IG5399 M18 / L = 38 8 nf brass 18...36 IP 67 200 150 52 IG5285 M18 / L = 80 8 nf brass 10...36 IP 67 300 250 53 IG5398 M18 / L = 80 8 nf PBT 10...36 IP 67 300 250 51 IG5401 Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 34 M18 / L = 80 5f PBT 10...55 IP 67 700 400 51 IG5593 M18 / L = 80 5f brass 10...55 IP 67 700 400 51 IG5594 M18 / L = 80 8 nf PBT 10...55 IP 67 300 400 51 IG5533 Product selectors and further information can be found at: www.ifm.com 64 f Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M18 / L = 80 Material Ub Protection [V] f Iload [Hz] [mA] 300 400 Drawing no. Order no. 53 IG5596 · 2-wire · DC PNP/NPN · Wiring diagram no. 34 8 nf M12 connector · Output function 135 brass 10...55 IP 67 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 108, M18 / L = 70 5f brass 10...55 IP 67 700 400 54 IG5595 M18 / L = 76 8 nf brass 10...55 IP 67 300 400 55 IG5597 Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 37 M18 / L = 110 5f PBT 10...55 IP 65 800 400 56 IG5718 M18 / L = 110 8 nf PBT 10...55 IP 65 300 400 56 IG5719 Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 M30 / L = 45 10 f brass 18...36 IP 67 300 150 57 II5166 M30 / L = 81 10 f brass 10...36 IP 67 250 250 58 II5256 M30 / L = 81 10 f PBT 10...36 IP 67 250 250 58 II5369 M30 / L = 45 15 nf brass 18...36 IP 67 250 150 59 II5346 M30 / L = 81 15 nf brass 10...36 IP 67 250 250 60 II5284 M30 / L = 81 15 nf PBT 10...36 IP 67 250 250 58 II5300 Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 34 M30 / L = 45 10 f brass 10...55 IP 67 450 400 57 II5493 M30 / L = 81 10 f PBT 10...55 IP 67 450 400 58 II5488 You can find wiring diagrams and scale drawings from page 114 65 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 34 M30 / L = 81 10 f brass 10...55 IP 67 450 400 58 II5489 M30 / L = 81 15 nf PBT 10...55 IP 67 200 400 58 II5436 M30 / L = 81 15 nf brass 10...55 IP 67 200 400 60 II5491 M12 connector · Output function 108, 135 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, M30 / L = 78 10 f brass 10...55 IP 67 450 400 61 II5490 M30 / L = 78 15 nf brass 10...55 IP 67 200 400 62 II5492 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors with analogue output 4...20 mA for industrial applications Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] M12 connector · Output function 4...20 mA analogue · 3-wire · DC analogue · Wiring diagram no. 5 · Connector groups 9, 11, 107, 108, 135 M12 / L = 70 0.2...2 f brass 15...30 IP 67 – – 3 IF6028 M12 / L = 70 0.4...4 nf brass 15...30 IP 67 – – 4 IF6030 M18 / L = 60 0.5...5 f brass 15...30 IP 67 – – 63 IG6086 M18 / L = 60 0.8...8 nf brass 15...30 IP 67 – – 64 IG6083 M30 / L = 70 1.0...10 f brass 15...30 IP 67 – – 16 II5916 Product selectors and further information can be found at: www.ifm.com 66 Inductive sensors Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. M12 connector · Output function 4...20 mA analogue · 3-wire · DC analogue · Wiring diagram no. 5 · Connector groups 9, 11, 107, 108, 135 M30 / L = 70 1.0...15 nf brass 15...30 IP 67 – – 17 II5913 40 x 40 x 54 1...15 f PA (polyamide) 15...30 IP 67 – – 65 IM5139 40 x 40 x 54 1...26 nf PA (polyamide) 15...30 IP 67 – – 65 IM5141 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors with analogue output 0...10 V for industrial applications Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] M12 connector · Output function 0...10 V analogue · 3-wire · DC analogue · Wiring diagram no. 5 · Connector groups 9, 11, 107, 108, 135 M12 / L = 70 0.2...2 f brass 15...30 IP 67 – – 3 IF6029 M12 / L = 70 0.4...4 nf brass 15...30 IP 67 – – 4 IF6031 M18 / L = 60 0.5...5 f brass 15...30 IP 67 – – 63 IG6087 M18 / L = 60 0.8...8 nf brass 15...30 IP 67 – – 64 IG6084 M30 / L = 70 1.0...10 f brass 15...30 IP 67 – – 16 II5917 M30 / L = 70 1.0...15 nf brass 15...30 IP 67 – – 17 II5914 40 x 40 x 54 1...15 f PA (polyamide) 15...30 IP 67 – – 65 IM5140 40 x 40 x 54 1...26 nf PA (polyamide) 15...30 IP 67 – – 65 IM5142 f = flush / nf = non flush You can find wiring diagrams and scale drawings from page 114 67 Inductive sensors Sensors with smooth sleeve for industrial applications Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 3 Ø 4 / L = 30 0.8 f stainless steel 10...36 IP 65 2000 100 66 IZ5026 Ø 4 / L = 23 0.8 f stainless steel 10...30 IP 65 2000 100 67 IZ5051 Ø 3 / L = 27 1 nf stainless steel 10...30 IP 67 5000 100 68 IZ5048 Ø 4 / L = 23 1.2 f stainless steel 10...30 IP 65 > 2000 100 67 IZ5052 Ø 4 / L = 27 1.5 nf stainless steel 10...30 IP 67 1800 100 69 IZ5047 70 IZ5035 M8 connector · Output function Ø 4 / L = 45 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 0.8 f M8 connector · Output function Ø 4 / L = 41 Cable 2 m · Output function stainless steel 10...36 IP 65 2000 100 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 104, 105 1.5 nf stainless steel 10...30 IP 67 1800 100 71 IZ5046 · 3-wire · DC PNP · Wiring diagram no. 3 Ø 6.5 / L = 35 1f brass 10...36 IP 67 900 200 72 IT5001 Ø 6.5 / L = 19 2f stainless steel 10...30 IP 67 1000 200 73 IT5039 Ø 6.5 / L = 27 2f high-grade st. steel 10...30 IP 67 1500 100 74 IT5042 M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 Ø 6.5 / L = 49 1f brass 10...36 IP 65 > 2000 250 75 IT5021 Ø 6.5 / L = 49 1.5 f brass 10...36 IP 65 2000 250 75 IT5034 Product selectors and further information can be found at: www.ifm.com 68 f Inductive sensors Type Dimensions Sensing range [mm] [mm] M8 connector · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 Ø 6.5 / L = 30 2f high-grade st. steel 10...30 IP 67 1500 100 76 IT5040 Ø 6.5 / L = 50 4 nf high-grade st. steel 10...30 IP 67 300 100 77 IT5044 IP 67 300 250 78 IA5082 300 400 78 IA5108 Cable 2 m · Output function Ø 20 / L = 77 · 3-wire · DC PNP · Wiring diagram no. 3 10 nf Cable 2 m · Output function Ø 20 / L = 77 Terminals · Output function Ø 20 / L = 92 Terminals · Output function Ø 20 / L = 92 10 nf Cable 2 m · Output function Ø 34 / L = 82 PBT 10...55 IP 67 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 10 nf PBT 10...36 IP 67 300 250 79 IA5127 IP 65 300 250 80 IA5062 IP 65 300 250 80 IA5063 IP 65 300 300 80 IA5122 IP 67 60 250 81 IB5096 · 3-wire · DC PNP · Wiring diagram no. 6 10 nf PBT 10...36 · 3-wire · DC PNP · Wiring diagram no. 6 10 nf Terminals · Output function Ø 20 / L = 92 10...36 · 2-wire · DC PNP/NPN · Wiring diagram no. 34 M12 connector · Output function 110, 135, 136 Ø 20 / L = 93 PBT PBT 10...36 · 2-wire · DC PNP/NPN · Wiring diagram no. 37 10 nf PBT 10...55 · 3-wire · DC PNP · Wiring diagram no. 3 20 nf PBT 10...36 You can find wiring diagrams and scale drawings from page 114 69 Inductive sensors Type Dimensions Sensing range [mm] [mm] Terminals · Output function Ø 34 / L = 98 Material Ub Protection [V] f Iload Drawing no. Order no. [Hz] [mA] 300 300 82 IB5124 · 2-wire · DC PNP/NPN · Wiring diagram no. 37 20 nf Terminals · Output function PBT 10...55 IP 65 · 3-wire · DC PNP · Wiring diagram no. 6 Ø 34 / L = 98 20 nf PBT 10...36 IP 65 350 250 82 IB5063 Ø 34 / L = 98 30 nf PBT 10...36 IP 65 350 200 82 IB5133 Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for industrial applications, rectangular housings Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub [V] · 3-wire · DC PNP · Wiring diagram no. 3 25 x 5 x 5 0.8 f aluminium 10...30 IP 65 1000 100 83 IL5022 40 x 8 x 8 2f brass 10...36 IP 65 2000 250 84 IL5002 40 x 8 x 8 2f brass 10...36 IP 65 2000 250 84 IL5003 40 x 8 x 8 2.5 f brass 10...36 IP 65 2000 250 84 IL5020 M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 40 x 8 x 8 2f brass 10...36 IP 65 2000 250 85 IL5004 40 x 8 x 8 2f brass 10...36 IP 65 2000 250 85 IL5005 IP 67 800 200 86 IS5001 Cable 2 m · Output function 28 x 10 x 16 · 3-wire · DC PNP · Wiring diagram no. 3 2f PBT 10...36 Product selectors and further information can be found at: www.ifm.com 70 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 3 28 x 10 x 16 3 nf PBT 10...36 IP 67 100 200 86 IS5031 28 x 10 x 16 4 nf PBT 10...36 IP 67 2000 250 87 IS5070 2000 200 86 IS5026 Cable 2 m · Output function 28 x 10 x 16 · 2-wire · DC PNP/NPN · Wiring diagram no. 34 2f M8 connector · Output function PBT 5...36 IP 67 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 28 x 10 x 16 2f PBT 10...36 IP 67 800 200 88 IS5035 28 x 10 x 16 4 nf PBT 10...36 IP 67 2000 250 88 IS5071 Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 40 x 12 x 26 2f PBT 10...36 IP 67 1400 250 89 IN5121 40 x 12 x 26 4 nf PBT 10...36 IP 67 1300 250 89 IN5129 Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 34 40 x 12 x 26 2f PBT 10...55 IP 67 1300 400 89 IN5207 40 x 12 x 26 4 nf PBT 10...55 IP 67 1200 400 89 IN5208 Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 7 40 x 12 x 26 2f PBT 10...36 IP 67 1400 250 89 IN5186 40 x 12 x 26 4 nf PBT 10...36 IP 67 1300 250 89 IN5188 90 IN5230 M8 connector · Output function 40 x 12 x 26 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 2f PBT 10...36 IP 67 1400 250 You can find wiring diagrams and scale drawings from page 114 71 Inductive sensors Type Dimensions Sensing range [mm] [mm] M8 connector · Output function 40 x 12 x 26 Cable 2 m · Output function Material Ub Protection [V] Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 4 nf PBT 10...36 IP 65 1300 250 90 IN5212 · 3-wire · DC PNP · Wiring diagram no. 3 60 x 36 x 10 5f PBT 10...36 IP 67 400 250 91 IW5051 60 x 36 x 10 8 nf PBT 10...36 IP 67 300 250 91 IW5058 IP 67 300 250 92 IW5053 93 IW5064 93 IW5062 Cable 2 m · Output function 60 x 36 x 10 · 3-wire · DC PNP · Wiring diagram no. 7 8 nf M8 connector · Output function 60 x 36 x 10 60 x 36 x 10 PBT 10...36 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 8 nf M8 connector · Output function PBT 10...36 IP 65 300 250 · 3-wire · DC PNP · Wiring diagram no. 4 · Connector groups 1, 2, 3, 68 8 nf M12 connector · Output function 110, 135, 136 PBT 10...36 IP 67 300 250 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 40 x 40 x 54 20 f PA (polyamide) 10...36 IP 67 100 200 65 IM5115 40 x 40 x 54 20 f PA (polyamide) 10...36 IP 67 200 200 65 IM5128 40 x 40 x 54 20 f PA (polyamide) 10...36 IP 67 200 200 94 IM5119 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 80 200 65 IM5116 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 200 200 65 IM5130 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5120 Product selectors and further information can be found at: www.ifm.com 72 f Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 60 200 65 IM5117 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 200 200 65 IM5131 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5129 M12 connector · Output function 40 x 40 x 54 · 3-wire · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 107, 108, 135 20 f M12 connector · Output function 135, 136 40 x 40 x 54 10...36 IP 67 100 200 65 IM5123 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 20 f M12 connector · Output function 40 x 40 x 54 PA (polyamide) PA (polyamide) 10...36 IP 67 200 200 65 IM5132 · 3-wire · DC PNP · Wiring diagram no. 8 · Connector groups 97, 98, 99, 100 20 f M12 connector · Output function 135, 136 PA (polyamide) 10...36 IP 67 200 200 94 IM5124 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 80 200 65 IM5134 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 200 200 65 IM5133 M12 connector · Output function 40 x 40 x 54 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 97, 98, 99, 100 35 nf M12 connector · Output function 135, 136 PA (polyamide) 10...36 IP 67 200 200 94 IM5125 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 60 200 65 IM5136 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 / IP 69K 200 200 65 IM5135 You can find wiring diagrams and scale drawings from page 114 73 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 40 x 40 x 54 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 97, 98, 99, 100 40 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5126 100 – 65 IM5118 M12 connector · 2-wire · AS-i · Wiring diagram no. 9 · Connector groups 9, 11, 107, 108, 135 40 x 40 x 54 15 f Terminals · Output function PBT 26.5...31.6 IP 67 · 3-wire · DC PNP · Wiring diagram no. 6 40 x 40 x 120 15 f PPE 10...36 IP 65 350 250 95 IM5020 40 x 40 x 120 20 nf PPE 10...36 IP 65 350 250 95 IM5019 40 x 40 x 120 30 nf PPE 10...36 IP 65 100 250 95 IM5046 Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 37 40 x 40 x 120 15 f PPE 10...55 IP 65 > 350 400 95 IM5037 40 x 40 x 120 20 nf PPE 10...55 IP 65 > 300 400 95 IM5038 Terminals · Output function · 4-wire · DC PNP · Wiring diagram no. 10 40 x 40 x 118 15 f PBT 10...60 IP 67 150 200 96 IV5003 40 x 40 x 118 20 f PBT 10...60 IP 67 150 200 97 IV5004 15 250 98 IC5005 Terminals · Output function 90 x 60 x 40 · 3-wire · DC PNP · Wiring diagram no. 38 40 nf M12 connector · Output function 110, 135, 136 92 x 80 x 40 PPE 10...36 IP 65 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 50 f PPE 10...36 IP 67 Product selectors and further information can be found at: www.ifm.com 74 70 250 99 ID5055 Inductive sensors Type Dimensions Sensing range [mm] [mm] Material f Iload [Hz] [mA] Drawing no. Order no. · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 50 f Terminals · Output function 105 x 80 x 40 Protection [V] M12 connector · Output function 135, 136 92 x 80 x 40 Ub PPE 10...36 IP 67 70 250 99 ID5058 100 250 100 ID5005 · 3-wire · DC PNP · Wiring diagram no. 38 60 nf PPE 10...36 IP 65 M12 connector · Output function normally open / closed programmable · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 105 x 80 x 40 Cable 2 m · Output function 120 x 80 x 30 60 nf PPE 10...36 IP 67 100 250 101 ID5046 IP 67 100 250 102 ID5026 Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 3 50 nf PPE 10...36 f = flush / nf = non flush Ring sensors for industrial applications Type Inside diameter Operating principle [mm] M12 connector · Output function 109, 110, 135, 136 Minimum diameter of the steel ball [Ø mm] Part speed max. Pulse stretching Response time / break time [m/s] [ms] [ms] · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 9, 10, 11, 12, 107, 108, 10.1 static 1.5 35 10...150 0.5 / 10 103 I7R201 10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 103 I7R203 15.1 static 2 35 10...150 0.5 / 10 104 I7R205 15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 104 I7R207 20.1 static 2.5 35 10...150 0.5 / 10 105 I7R209 20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 105 I7R211 You can find wiring diagrams and scale drawings from page 114 75 Inductive sensors Type Inside diameter Operating principle [mm] M12 connector · Output function 109, 110, 135, 136 Minimum diameter of the steel ball [Ø mm] Part speed max. Pulse stretching Response time / break time [m/s] [ms] [ms] Order no. · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 9, 10, 11, 12, 107, 108, 25.1 static 3.0 35 10...150 0.5 / 10 106 I7R213 25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 106 I7R215 M12 connector · Output function 109, 110, 135, 136 10.1 · 3-wire · DC NPN · Wiring diagram no. 12 · Connector groups 9, 10, 11, 12, 107, 108, static M12 connector · Output function 1.5 35 10...150 0.5 / 10 103 I7R202 · 3-wire · DC NPN · Wiring diagram no. 12 · Connector groups 9, 11, 107, 108, 135 10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 103 I7R204 15.1 static 2 35 10...150 0.5 / 10 104 I7R206 15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 104 I7R208 20.1 static 2.5 35 10...150 0.5 / 10 105 I7R210 20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 105 I7R212 25.1 static 3.0 35 10...150 0.5 / 10 106 I7R214 25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 106 I7R216 M12 connector · Output function 109, 110, 135, 136 51 · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 9, 10, 11, 12, 107, 108, static 6 35 Product selectors and further information can be found at: www.ifm.com 76 Drawing no. 10...150 0.5 / 10 107 I7R217 Inductive sensors Tube sensors for industrial applications Type Sensing range Operating principle [mm] M8 connector · Output function ≤ 14 M8 connector · Output function ≤ 14 static M8 connector · Output function ≤ 20 M8 connector · Output function ≤ 20 static static static dynamic [m/s] [ms] [ms] Drawing no. Order no. 3.0 35 100 0.5 / 100 108 I85000 3.0 35 100 0.5 / 100 108 I85001 · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 9, 10, 11, 12, 3.0 35 100 0.5 / 100 109 I85002 · 3-wire · DC NPN · Wiring diagram no. 12 · Connector groups 9, 11, 107, 108, 3.0 35 100 0.5 / 100 109 I85003 1.0 35 100 0.2 / 100 108 I85004 108 I85005 · 3-wire · DC NPN · Wiring diagram no. 12 · Connector groups 1, 3, 68 dynamic dynamic Cable with connector 0.09 m · Output function 135 ≤ 20 Response time / break time · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 1, 2, 3, 68 Cable with connector 0.09 m · Output function 107, 108, 109, 110, 135, 136 ≤ 20 Pulse stretching · 3-wire · DC NPN · Wiring diagram no. 12 · Connector groups 1, 3, 68 Cable with connector 0.09 m · Output function 135 ≤ 14 Part speed max. · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 1, 2, 3, 68 Cable with connector 0.09 m · Output function 107, 108, 109, 110, 135, 136 ≤ 14 Minimum diameter of the steel ball [Ø mm] dynamic 1.0 35 100 0.2 / 100 · 3-wire · DC PNP · Wiring diagram no. 11 · Connector groups 9, 10, 11, 12, 1.0 35 100 0.2 / 100 109 I85006 · 3-wire · DC NPN · Wiring diagram no. 12 · Connector groups 9, 11, 107, 108, 1.0 35 100 0.2 / 100 109 I85007 You can find wiring diagrams and scale drawings from page 114 77 Inductive sensors Sensors for industrial applications, AC and AC/DC Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] Iload AC / DC [Hz] [mA] Drawing no. Order no. · 2-wire · AC · Wiring diagram no. 13 M12 / L = 71 2f PBT 20...250 IP 67 25 250 45 IF0001* M12 / L = 71 2f brass 20...250 IP 67 25 250 45 IF0005* M12 / L = 71 4 nf PBT 20...250 IP 67 25 250 45 IF0003* M12 / L = 71 4 nf brass 20...250 IP 67 25 250 47 IF0007* Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 14 M18 / L = 80 5f PBT 20...250 IP 67 25 / 50 350 / 100 51 IG0005* M18 / L = 80 5f brass 20...250 IP 67 25 / 50 350 / 100 51 IG0011* M18 / L = 80 8 nf PBT 20...250 IP 67 25 / 50 350 / 100 51 IG0006* M18 / L = 80 8 nf brass 20...250 IP 67 25 / 50 350 / 100 53 IG0012* Ø 20 / L = 77 10 nf PBT 20...250 IP 67 25 / 70 350 / 100 78 IA0004* IP 67 25 / 70 350 / 100 78 IA0027* IP 65 25 / 70 350 / 100 80 IA0032* IP 67 25 / 50 350 / 100 58 II0005* Cable 2 m · Output function Ø 20 / L = 77 · 2-wire · AC/DC · Wiring diagram no. 15 10 nf Terminals · Output function Ø 20 / L = 92 Cable 2 m · Output function M30 / L = 81 PBT 20...250 · 2-wire · AC/DC · Wiring diagram no. 16 10 nf PBT 20...250 · 2-wire · AC/DC · Wiring diagram no. 14 10 f PBT 20...250 Product selectors and further information can be found at: www.ifm.com 78 f AC / DC Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection [V] f AC / DC Iload AC / DC [Hz] [mA] Drawing no. Order no. · 2-wire · AC/DC · Wiring diagram no. 14 M30 / L = 81 10 f brass 20...250 IP 67 25 / 50 350 / 100 58 II0011* M30 / L = 81 15 nf PBT 20...250 IP 67 25 / 50 350 / 100 58 II0006* M30 / L = 81 15 nf brass 20...250 IP 67 25 / 50 350 / 100 60 II0012* Ø 34 / L = 82 20 nf PBT 20...250 IP 67 25 / 50 350 / 100 81 IB0004* Ø 34 / L = 82 30 nf PBT 20...250 IP 67 25 / 50 350 / 100 81 IB0026* Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 15 Ø 34 / L = 82 20 nf PBT 20...250 IP 67 25 / 50 350 / 100 81 IB0017* Ø 34 / L = 82 30 nf PBT 20...250 IP 67 25 / 50 350 / 100 81 IB0027* IP 65 25 / 50 350 / 100 82 IB0016* Terminals · Output function Ø 34 / L = 98 Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 16 20 nf PBT 20...250 · 2-wire · AC/DC · Wiring diagram no. 14 40 x 12 x 26 2f PBT 20...250 IP 67 25 / 50 350 / 100 89 IN0073* 40 x 12 x 26 4 nf PBT 20...250 IP 67 25 / 50 350 / 100 89 IN0081* Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 15 40 x 12 x 26 2f PBT 20...250 IP 67 25 / 50 350 / 100 89 IN0077* 40 x 12 x 26 4 nf PBT 20...250 IP 67 25 / 50 350 / 100 89 IN0085* You can find wiring diagrams and scale drawings from page 114 79 Inductive sensors Type Dimensions Sensing range [mm] [mm] Terminals · Output function Material Ub Protection [V] f AC / DC Iload AC / DC [Hz] [mA] Drawing no. Order no. · 2-wire · AC/DC · Wiring diagram no. 16 40 x 40 x 120 15 f PPE 20...250 IP 65 20 / 55 350 / 100 95 IM0011* 40 x 40 x 120 20 nf PPE 20...250 IP 65 20 / 55 350 / 100 95 IM0010* 350 / 100 110 IM0049* 1/2“ connector · Output function 40 x 40 x 66 · 2-wire · AC/DC · Wiring diagram no. 17 · Connector group 26 35 nf M12 connector · Output function PPE 20...250 IP 67 20 / 50 · 2-wire · AC/DC · Wiring diagram no. 17 · Connector group 8 40 x 40 x 66 20 f PPE 20...250 IP 67 25 / 140 350 / 100 111 IM0054* 40 x 40 x 66 35 nf PPE 20...250 IP 67 20 / 50 350 / 100 111 IM0053* IP 65 10 350 / 100 98 IC0003* IP 65 25 / 35 350 / 100 102 ID0014* 25 350 / 100 99 ID0049* 4 350 / 100 100 ID0013* Terminals · Output function 90 x 60 x 40 Cable 2 m · Output function 120 x 80 x 30 · 2-wire · AC/DC · Wiring diagram no. 39 40 nf 50 nf modified PPE 20...250 · 2-wire · AC/DC · Wiring diagram no. 17 · Connector group 8 50 f Terminals · Output function 105 x 80 x 40 20...250 · 2-wire · AC/DC · Wiring diagram no. 14 M12 connector · Output function 92 x 80 x 40 PPE modified PPE 20...250 IP 67 · 2-wire · AC/DC · Wiring diagram no. 39 60 nf modified PPE 20...250 IP 65 f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Product selectors and further information can be found at: www.ifm.com 80 Inductive sensors Sensors for hygienic and wet areas with increased sensing range Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 M12 / L = 45 4f high-grade st. steel 10...36 IP 68 / IP 69K 800 100 1 IFT203 M12 / L = 50 7 nf high-grade st. steel 10...36 IP 68 / IP 69K 800 100 112 IFT200 M12 / L = 70 4f high-grade st. steel 10...36 IP 68 / IP 69K 700 100 3 IFT216 M12 / L = 70 7 nf high-grade st. steel 10...36 IP 68 / IP 69K 800 100 4 IFT217 M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 107, 109 M12 / L = 45 4f high-grade st. steel 10...36 IP 68 / IP 69K 800 100 1 IFT204 M12 / L = 50 7 nf high-grade st. steel 10...36 IP 68 / IP 69K 800 100 112 IFT201 M12 connector · Output function 107, 109 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups M12 / L = 70 4f high-grade st. steel 10...36 IP 68 / IP 69K 500 100 3 IFT205 M12 / L = 70 7 nf high-grade st. steel 10...30 IP 68 / IP 69K 700 100 113 IFT202 Ø 12 / L = 70 7 nf high-grade st. steel 10...30 IP 68 / IP 69K 700 100 114 IFT210 Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 M12 / L = 50 4f high-grade st. steel 10...36 IP 68 / IP 69K 800 100 115 IFT206 M12 / L = 61 7 nf high-grade st. steel 10...36 IP 68 / IP 69K 800 100 116 IFT208 IP 68 / IP 69K 800 100 115 IFT207 Cable 10 m · Output function M12 / L = 50 · 3-wire · DC PNP · Wiring diagram no. 3 4f high-grade st. steel 10...36 You can find wiring diagrams and scale drawings from page 114 81 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 10 m · Output function M12 / L = 61 Material Ub Protection [V] Iload [Hz] [mA] 800 100 Drawing no. Order no. 116 IFT209 · 3-wire · DC PNP · Wiring diagram no. 3 7 nf M12 connector · Output function high-grade st. steel 10...36 IP 68 / IP 69K · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 M18 / L = 46 8f high-grade st. steel 10...36 IP 68 / IP 69K 600 100 7 IGT203 M18 / L = 51 12 nf high-grade st. steel 10...36 IP 68 / IP 69K 300 100 117 IGT200 M18 / L = 70 8f high-grade st. steel 10...36 IP 68 / IP 69K 400 100 9 IGT219 M18 / L = 70 12 nf high-grade st. steel 10...36 IP 68 / IP 69K 300 100 10 IGT220 M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 107, 109 M18 / L = 46 8f high-grade st. steel 10...36 IP 68 / IP 69K 600 100 7 IGT204 M18 / L = 51 12 nf high-grade st. steel 10...36 IP 68 / IP 69K 300 100 117 IGT201 M12 connector · Output function 107, 109 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups M18 / L = 70 8f high-grade st. steel 10...36 IP 68 / IP 69K 400 100 9 IGT205 M18 / L = 70 12 nf high-grade st. steel 10...30 IP 68 / IP 69K 300 100 118 IGT202 Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3 M18 / L = 57 8f high-grade st. steel 10...36 IP 68 / IP 69K 600 100 119 IGT206 M18 / L = 62 12 nf high-grade st. steel 10...36 IP 68 / IP 69K 300 100 120 IGT208 IP 68 / IP 69K 400 100 119 IGT207 Cable 10 m · Output function M18 / L = 57 · 3-wire · DC PNP · Wiring diagram no. 3 8f high-grade st. steel 10...36 Product selectors and further information can be found at: www.ifm.com 82 f Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 10 m · Output function M18 / L = 62 Material Ub Protection [V] f Iload [Hz] [mA] 300 100 Drawing no. Order no. 120 IGT209 · 3-wire · DC PNP · Wiring diagram no. 3 12 nf M12 connector · Output function high-grade st. steel 10...36 IP 68 / IP 69K · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 M30 / L = 50 14 f high-grade st. steel 10...36 IP 68 / IP 69K 100 100 14 IIT205 M30 / L = 50 22 nf high-grade st. steel 10...36 IP 68 / IP 69K 100 100 121 IIT200 M30 / L = 70 15 f high-grade st. steel 10...36 IP 68 / IP 69K 100 100 16 IIT212 M30 / L = 70 22 nf high-grade st. steel 10...36 IP 68 / IP 69K 100 100 17 IIT213 M12 connector · Output function 107, 109 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups M30 / L = 70 14 f high-grade st. steel 10...36 IP 68 / IP 69K 50 100 16 IIT204 M30 / L = 70 22 nf high-grade st. steel 10...36 IP 68 / IP 69K 100 100 17 IIT202 1/2“ UNF-Connector · Output function M30 / L = 70 Cable 6 m · Output function 22 nf · 2-wire · AC/DC · Wiring diagram no. 18 · Connector group 26 high-grade st. steel 20...140 IP 68 / IP 69K 25 / 100 200 122 IIT002 · 3-wire · DC PNP · Wiring diagram no. 3 M30 / L = 59 22 nf high-grade st. steel 10...36 IP 68 / IP 69K 100 100 123 IIT207 M30 / L = 59 14 f high-grade st. steel 10...36 IP 68 / IP 69K 100 100 124 IIT209 IP 68 / IP 69K 100 100 124 IIT206 Cable 10 m · Output function M30 / L = 59 · 3-wire · DC PNP · Wiring diagram no. 3 14 f high-grade st. steel 10...36 You can find wiring diagrams and scale drawings from page 114 83 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 10 m · Output function M30 / L = 59 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 3 22 nf high-grade st. steel 10...36 IP 68 / IP 69K 100 100 123 IIT208 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Full metal sensors for hygienic and wet areas Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 M12 / L = 60 3f high-grade st. steel 10...36 IP 68 / IP 69K 100 100 125 IFT243 M12 / L = 60 3f high-grade st. steel 10...36 IP 68 / IP 69K 100 100 126 IFT240 127 IFT245 126 IFT244 127 IFT246 54 IGT247 128 IGT249 M12 connector · Output function M12 / L = 70 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109, 113 6 nf M12 connector · Output function M12 / L = 60 3f 6 nf high-grade st. steel 10...36 IP 68 / IP 69K high-grade st. steel 10...36 IP 65 / IP 67 / IP 68 / IP 69K 5f high-grade st. steel 10...36 IP 68 / IP 69K 100 100 100 500 100 100 100 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109, 113 12 nf high-grade st. steel 10...36 IP 65 / IP 67 / IP 68 / IP 69K Product selectors and further information can be found at: www.ifm.com 84 500 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 M12 connector · Output function M18 / L = 70 IP 65 / IP 67 / IP 68 / IP 69K · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 107, 113 M12 connector · Output function M18 / L = 70 10...36 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector group 107 M12 connector · Output function M12 / L = 70 high-grade st. steel 500 100 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M18 / L = 70 Iload [Hz] [mA] Drawing no. Order no. 10...36 IP 68 / IP 69K 100 100 54 IGT248 high-grade st. steel 10...36 IP 65 / IP 67 / IP 68 / IP 69K 500 100 128 IGT250 129 IIT228 130 IIT231 129 IIT230 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 10 f high-grade st. steel 10...36 IP 68 / IP 69K 50 100 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109, 113 25 nf high-grade st. steel 10...36 IP 65 / IP 67 / IP 68 / IP 69K 250 100 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector group 107 10 f M12 connector · Output function M30 / L = 70 high-grade st. steel 12 nf M12 connector · Output function M30 / L = 70 f · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 107, 113 M12 connector · Output function M30 / L = 70 Protection [V] 5f M12 connector · Output function M30 / L = 70 Ub · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 107, 109 M12 connector · Output function M18 / L = 70 Material high-grade st. steel 10...36 IP 68 / IP 69K 50 100 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 107, 113 25 nf high-grade st. steel 10...36 IP 65 / IP 67 / IP 68 / IP 69K 250 100 130 IIT232 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for hygienic and wet areas Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M8 / L = 70 1f high-grade st. steel 10...36 IP 67 2000 200 131 IE5215 M8 / L = 55 2 nf high-grade st. steel 10...36 IP 67 2000 200 132 IE5295 M12 / L = 44 2f high-grade st. steel 10...36 IP 67 1200 250 133 IF5815 You can find wiring diagrams and scale drawings from page 114 85 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material Ub Protection [V] Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M12 / L = 59 2f high-grade st. steel 10...36 IP 67 1100 200 134 IF5514 M12 / L = 83 2f high-grade st. steel 10...36 IP 67 800 250 48 IF5851 M12 / L = 44 4 nf high-grade st. steel 10...36 IP 67 1400 150 135 IF5796 M12 / L = 59 4 nf high-grade st. steel 10...36 IP 67 1400 250 136 IF5813 M12 / L = 83 4 nf high-grade st. steel 10...36 IP 67 400 250 49 IF5594 M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 107, 108, 135 M12 / L = 83 2f high-grade st. steel 10...55 IP 67 1100 400 48 IF5759 M12 / L = 83 4 nf high-grade st. steel 10...55 IP 67 1500 300 49 IF5760 320 250 53 IG5202 Cable 2 m · Output function M18 / L = 80 · 4-wire · DC PNP · Wiring diagram no. 20 8 nf M12 connector · Output function high-grade st. steel 10...36 IP 67 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M18 / L = 76 5f high-grade st. steel 10...36 IP 67 500 250 137 IG5813 M18 / L = 90 8 nf high-grade st. steel 10...36 IP 67 300 250 138 IG5602 M12 connector · Output function M18 / L = 45 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 107, 108, 109, 135, 136 10 nf M12 connector · Output function M18 / L = 90 high-grade st. steel 10...36 IP 67 300 250 139 IG5846 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 107, 108, 135 5f high-grade st. steel 10...55 IP 67 Product selectors and further information can be found at: www.ifm.com 86 f 700 400 140 IG5806 Inductive sensors Type Dimensions Sensing range [mm] [mm] Protection f Iload [Hz] [mA] Drawing no. Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 107, 108, 135 8 nf M12 connector · Output function 107, 109 M18 / L = 70 Ub [V] M12 connector · Output function M18 / L = 77 Material high-grade st. steel 10...55 IP 67 300 300 141 IG5772 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 8 nf M12 connector · Output function high-grade st. steel 10...36 IP 68 / IP 69K 300 100 118 IGT240 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M30 / L = 92 10 f high-grade st. steel 10...36 IP 67 250 250 142 II5689 M30 / L = 92 15 nf high-grade st. steel 10...36 IP 67 200 250 143 II5776 M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 107, 108, 135 M30 / L = 92 10 f high-grade st. steel 10...55 IP 67 450 400 142 II5751 M30 / L = 78 15 nf high-grade st. steel 10...55 IP 67 200 400 62 II5733 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for oils and coolants with increased sensing range Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M8 / L = 50 2f high-grade st. steel 10...36 IP 67 1000 200 40 IE5381 M8 / L = 50 4 nf high-grade st. steel 10...36 IP 67 700 200 144 IE5382 M12 / L = 45 4f brass 10...36 IP 68 700 100 1 IFC204 M12 / L = 45 4f brass 10...36 IP 68 700 100 1 IFC206 You can find wiring diagrams and scale drawings from page 114 87 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 60 4f brass 10...36 IP 68 700 200 126 IFC229 M12 / L = 70 4f brass 10...36 IP 68 700 100 3 IFC237 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 45 4f brass 10...36 IP 68 700 100 1 IFC207 M12 / L = 45 4f brass 10...36 IP 68 700 100 1 IFC209 M12 connector · Output function M12 / L = 45 · 2-wire · DC PNP/NPN · Wiring diagram no. 32 · Connector groups 9, 11, 107, 108, 135 4f M12 connector · Output function M12 / L = 45 brass 10...30 IP 68 700 100 1 IFC200 · 2-wire · DC PNP/NPN · Wiring diagram no. 40 · Connector groups 9, 11, 107, 108, 135 4f brass 10...30 IP 68 700 100 1 IFC202 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M12 / L = 70 4f M12 connector · Output function 108, 135 M12 / L = 60 brass 10...30 IP 68 100 3 IFC210 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 4f M12 connector · Output function 110, 135, 136 brass 10...36 IP 68 700 100 126 IFC234 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 50 7 nf brass 10...36 IP 68 700 100 2 IFC205 M12 / L = 60 7 nf brass 10...36 IP 68 700 200 145 IFC230 M12 / L = 70 7 nf brass 10...36 IP 68 700 100 4 IFC238 Product selectors and further information can be found at: www.ifm.com 88 500 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M12 / L = 50 7 nf Protection [V] f Iload [Hz] [mA] Drawing no. Order no. brass 10...36 IP 68 700 100 2 IFC208 · 2-wire · DC PNP/NPN · Wiring diagram no. 32 · Connector groups 9, 11, 107, 108, 135 7 nf M12 connector · Output function 108, 135 M12 / L = 60 Ub · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 connector · Output function M12 / L = 50 Material brass 10...30 IP 68 700 100 2 IFC201 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 7 nf M12 connector · Output function 110, 135, 136 brass 10...36 IP 68 500 100 145 IFC235 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 46 8f brass 10...36 IP 68 400 100 7 IGC204 M18 / L = 46 8f brass 10...36 IP 68 400 100 7 IGC206 M18 / L = 60 8f brass 10...36 IP 68 400 200 63 IGC221 M18 / L = 70 8f brass 10...36 IP 68 400 100 9 IGC224 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 46 8f brass 10...36 IP 68 400 100 7 IGC207 M18 / L = 46 8f brass 10...36 IP 68 400 100 7 IGC209 M12 connector · Output function M18 / L = 46 · 2-wire · DC PNP/NPN · Wiring diagram no. 32 · Connector groups 9, 11, 107, 108, 135 8f M12 connector · Output function M18 / L = 46 brass 10...30 IP 68 400 100 7 IGC200 · 2-wire · DC PNP/NPN · Wiring diagram no. 40 · Connector groups 9, 11, 107, 108, 135 8f brass 10...30 IP 68 300 100 7 IGC202 You can find wiring diagrams and scale drawings from page 114 89 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 135 M18 / L = 70 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 108, 8f brass 10...30 IP 68 400 100 9 IGC222 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M18 / L = 70 8f M12 connector · Output function 110, 135, 136 brass 10...30 IP 68 100 9 IGC210 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 51 12 nf brass 10...36 IP 68 300 100 8 IGC205 M18 / L = 60 12 nf brass 10...36 IP 68 300 200 64 IGC220 M18 / L = 70 12 nf brass 10...36 IP 68 300 100 10 IGC225 M12 connector · Output function 110, 135, 136 M18 / L = 51 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 12 nf M12 connector · Output function M18 / L = 51 M18 / L = 51 12 nf 10...36 IP 68 300 100 8 IGC208 brass 10...30 IP 68 250 100 8 IGC201 · 2-wire · DC PNP/NPN · Wiring diagram no. 40 · Connector groups 9, 11, 107, 108, 135 12 nf M12 connector · Output function 135 M18 / L = 70 brass · 2-wire · DC PNP/NPN · Wiring diagram no. 32 · Connector groups 9, 11, 107, 108, 135 M12 connector · Output function brass 10...30 IP 68 250 100 8 IGC203 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 108, 12 nf M12 connector · Output function 110, 135, 136 brass 10...36 IP 68 300 100 10 IGC223 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M30 / L = 50 15 f brass 10...36 IP 68 100 100 14 IIC200 M30 / L = 60 15 f brass 10...36 IP 68 100 200 146 IIC206 Product selectors and further information can be found at: www.ifm.com 90 400 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M30 / L = 70 Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 15 f high-grade st. steel M12 connector · Output function 108, 135 M30 / L = 70 Material 10...36 IP 68 100 100 16 IIC210 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 15 f brass M12 connector · Output function 110, 135, 136 10...30 IP 68 100 100 16 IIC208 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M30 / L = 50 22 nf brass 10...36 IP 68 100 100 15 IIC201 M30 / L = 60 22 nf brass 10...36 IP 68 100 200 147 IIC207 M30 / L = 70 22 nf high-grade st. steel 10...36 IP 68 100 100 17 IIC211 M12 connector · Output function 108, 135 M30 / L = 70 · 2-wire · DC PNP/NPN · Wiring diagram no. 33 · Connector groups 9, 11, 107, 22 nf brass 10...30 IP 68 100 100 17 IIC209 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] 148 IEC201 148 IEC202 f = flush / nf = non flush Full metal sensors for oils and coolants Type Dimensions Sensing range [mm] [mm] M8 connector · Output function M8 / L = 50 2f high-grade st. steel 10...36 IP 67 100 100 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 1, 3, 68 2f M12 connector · Output function M8 / L = 60 [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 M8 connector · Output function M8 / L = 50 Material high-grade st. steel 10...36 IP 67 100 100 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 2f high-grade st. steel 10...36 IP 67 / IP 68 100 100 149 IEC200 You can find wiring diagrams and scale drawings from page 114 91 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M8 / L = 60 high-grade st. steel 3f [Hz] [mA] Drawing no. Order no. 10...36 IP 67 / IP 68 100 100 149 IEC203 10...36 IP 67 / IP 68 100 100 126 IFC258 high-grade st. steel 10...36 IP 67 / IP 68 100 100 126 IFC266 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 5f high-grade st. steel 10...36 IP 67 / IP 68 100 100 54 IGC248 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 9, 11, 107, 108, 135 5f high-grade st. steel 10...36 IP 67 / IP 68 100 100 54 IGC252 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 10 f M12 connector · Output function M30 / L = 70 Iload · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 9, 11, 107, 108, 135 M12 connector · Output function 110, 135, 136 M30 / L = 70 high-grade st. steel 3f M12 connector · Output function M18 / L = 70 f · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 connector · Output function 110, 135, 136 M18 / L = 70 Protection [V] 2f M12 connector · Output function M12 / L = 60 Ub · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 9, 11, 107, 108, 135 M12 connector · Output function 110, 135, 136 M12 / L = 60 Material high-grade st. steel 10...36 IP 67 / IP 68 50 100 129 IIC224 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 9, 11, 107, 108, 135 10 f high-grade st. steel 10...36 IP 67 / IP 68 50 100 129 IIC226 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Full metal sensors for oils and coolants with correction factor K = 0 Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M12 / L = 60 Material Ub Protection [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 2.5 f high-grade st. steel 10...36 IP 68 Product selectors and further information can be found at: www.ifm.com 92 100 100 126 IFC263 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M12 / L = 60 Protection [V] 2.5 f high-grade st. steel f Iload [Hz] [mA] Drawing no. Order no. 10...36 IP 68 100 100 126 IFC264 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 4.5 f high-grade st. steel M12 connector · Output function 110, 135, 136 M18 / L = 70 Ub · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 connector · Output function 110, 135, 136 M18 / L = 70 Material 10...36 IP 68 100 100 150 IGC249 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 4.5 f high-grade st. steel 10...36 IP 68 100 100 150 IGC250 Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for oils and coolants with correction factor K = 1 Type Dimensions Sensing range [mm] [mm] M8 connector · Output function Material Ub [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 M8 / L = 65 1.5 f high-grade st. steel 10...30 IP 67 1000 200 151 IE5390 M8 / L = 65 4 nf high-grade st. steel 10...30 IP 67 1000 200 152 IE5391 153 IFC259 M12 connector · Output function M12 / L = 65 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 3f M12 connector · Output function 110, 135, 136 brass 10...30 IP 68 > 2000 200 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 65 8 nf high-grade st. steel 10...30 IP 68 > 2000 200 154 IFC246 M18 / L = 65 5f high-grade st. steel 10...30 IP 68 > 2000 200 155 IGC232 You can find wiring diagrams and scale drawings from page 114 93 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 65 12 nf high-grade st. steel 10...30 IP 68 > 2000 200 156 IGC233 M30 / L = 65 10 f high-grade st. steel 10...30 IP 68 1000 200 157 IIC218 M30 / L = 65 22 nf high-grade st. steel 10...30 IP 68 1000 200 158 IIC219 Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for oils and coolants with ceramic sensing face Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M12 / L = 45 Ub [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 4f M12 connector · Output function 110, 135, 136 M12 / L = 45 Material brass 10...36 IP 68 700 100 1 IFC206 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 4f brass 10...36 IP 68 700 100 1 IFC209 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M12 / L = 70 4f M12 connector · Output function 110, 135, 136 M18 / L = 46 brass 10...30 IP 68 500 100 3 IFC210 · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 8f brass 10...36 IP 68 400 100 7 IGC209 M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M18 / L = 70 8f brass 10...30 IP 68 Product selectors and further information can be found at: www.ifm.com 94 400 100 9 IGC210 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M30 / L = 60 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 15 f brass 10...36 IP 68 100 200 146 IIC206 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for oils and coolants, AS-i system Type Dimensions Sensing range [mm] [mm] Material [V] M12 connector · 2-wire · AS-i · Wiring diagram no. 9 · Connector groups 9, 11, 107, 108, 135 M12 / L = 60 4f high-grade st. steel 26.5...31.6 IP 68 100 – 126 IFC247 M18 / L = 60 8f high-grade st. steel 26.5...31.6 IP 68 100 – 63 IGC234 M18 / L = 60 12 nf high-grade st. steel 26.5...31.6 IP 68 100 – 64 IGC235 M30 / L = 60 14 f high-grade st. steel 26.5...31.6 IP 68 100 – 146 IIC220 M30 / L = 60 22 nf high-grade st. steel 26.5...31.6 IP 68 100 – 147 IIC221 Protection f Iload Drawing no. Order no. [Hz] [mA] 1000 100 159 IE9203 f = flush / nf = non flush Sensors for oils and coolants, threaded housings Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M8 / L = 42 Ub [V] · 2-wire · DC PNP/NPN · Wiring diagram no. 41 2f Cable with connector 0.8 m · Output function 108, 135 M8 / L = 42 Material 2f brass 10...55 IP 67 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, brass 10...55 IP 67 1000 100 160 IE9902 You can find wiring diagrams and scale drawings from page 114 95 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M8 / L = 69 Cable 2 m · Output function M12 / L = 54 Cable 2 m · Output function M18 / L = 54 Ub Protection [V] 1f Iload [Hz] [mA] Drawing no. Order no. brass 5...36 IP 65 2000 200 43 IE9940 800 100 161 IF9222 · 2-wire · DC PNP/NPN · Wiring diagram no. 41 2f brass 2f 10...55 IP 67 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, brass 10...55 IP 67 800 100 162 IF9920 700 400 163 IG5682 · 2-wire · DC PNP/NPN · Wiring diagram no. 22 5f M12 connector · Output function 110, 135, 136 brass 10...55 IP 67 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M12 / L = 45 2f brass 10...36 IP 68 700 200 1 IFC239 M12 / L = 60 2f brass 10...36 IP 68 700 200 126 IFC243 M12 / L = 70 2f brass 10...36 IP 68 700 200 3 IFC241 M12 connector · Output function M12 / L = 60 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, 108, 135 2f brass Cable with connector 0.8 m · Output function 108, 135 M18 / L = 58 5f M12 connector · Output function M18 / L = 65 10...55 IP 67 800 100 164 IF9924 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, brass 10...55 IP 67 700 400 165 IG9984 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, 108, 135 5f brass 10...55 IP 67 Product selectors and further information can be found at: www.ifm.com 96 f · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, 108, 135 Cable with connector 0.8 m · Output function 108, 135 M12 / L = 54 Material 700 400 166 IG9983 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 M30 / L = 50 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 15 nf high-grade st. steel 10...36 IP 68 100 200 15 IIC213 Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for oils and coolants, rectangular housings Type Dimensions Sensing range [mm] [mm] Material [V] Cable with connector 0.8 m · Output function 108, 135 26 x 26 x 26 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, 10 f polyamide Cable with connector 0.15 m · Output function 108, 135 26 x 26 x 26 10 f M12 connector · Output function 26 x 26 x 43 10 f polyamide 15 f 15 f M12 connector · Output function 40 x 40 x 54 IP 67 250 100 167 IO5017 10...36 IP 67 250 100 167 IO5018 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, 108, 135 10...36 IP 67 250 100 168 IO5016 · 2-wire · DC PNP/NPN · Wiring diagram no. 42 · Connector groups 9, 11, 107, PA (polyamide) Cable with connector 0.8 m · Output function 108, 135 40 x 40 x 54 10...36 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 9, 11, 107, polyamide Cable with connector 0.8 m · Output function 108, 135 40 x 40 x 54 Ub 10...36 IP 67 200 100 169 IM5137 · 2-wire · DC PNP/NPN · Wiring diagram no. 43 · Connector groups 9, 11, 107, PA (polyamide) 10...36 IP 67 200 100 169 IM5138 · 2-wire · DC PNP/NPN · Wiring diagram no. 43 · Connector groups 9, 11, 107, 108, 135 15 f PA (polyamide) 10...36 IP 67 200 100 170 IM5127 f = flush / nf = non flush You can find wiring diagrams and scale drawings from page 114 97 Inductive sensors Full metal sensors with non-stick coating against weld spatter Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M8 / L = 60 2f 2f 4f 4f 6f 6f high-grade st. steel high-grade st. steel high-grade st. steel high-grade st. steel high-grade st. steel high-grade st. steel 12 f high-grade st. steel IP 67 / IP 68 10...36 IP 67 / IP 68 10...36 IP 67 10...36 IP 67 10...36 IP 67 10...36 IP 67 10...36 IP 67 12 f high-grade st. steel 2f 10...36 IP 67 100 149 IER200 100 100 149 IER201 2 100 126 IFR200 2 100 126 IFR202 2 100 54 IGR200 2 100 54 IGR202 2 100 129 IIR200 2 100 129 IIR202 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 97, 99, 100 high-grade st. steel 10...36 IP 67 Product selectors and further information can be found at: www.ifm.com 98 100 · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 97, 99, 100 Cable with connector 0.3 m · Output function M8 / L = 45 10...36 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 connector · Output function M30 / L = 70 [mA] Order no. · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 97, 99, 100 M12 connector · Output function M30 / L = 70 [Hz] Drawing no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 connector · Output function M18 / L = 70 Iload · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 97, 99, 100 M12 connector · Output function M18 / L = 70 [V] f · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 connector · Output function M12 / L = 60 Protection · 3-wire · DC NPN · Wiring diagram no. 19 · Connector groups 97, 99, 100 M12 connector · Output function M12 / L = 60 Ub · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 connector · Output function M8 / L = 60 Material 150 100 171 IER203 Inductive sensors Type Dimensions Sensing range [mm] [mm] Material 2f 4f M12 / L = 40 4f M18 / L = 40 6f M18 / L = 40 6f M30 / L = 40 12 f M30 / L = 40 Cable 3 m · Output function 12 f IP 67 150 100 171 IER206 10...36 IP 67 75 100 172 IFR203 10...36 IP 67 75 100 172 IFR206 10...36 IP 67 50 100 173 IGR203 10...36 IP 67 50 100 173 IGR206 · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 97, 99, 100 high-grade st. steel Cable with connector 0.3 m · Output function 10...36 · 2-wire · DC PNP/NPN · Wiring diagram no. 23 · Connector groups 97, 99, 100 high-grade st. steel Cable with connector 0.3 m · Output function [mA] Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 97, 99, 100 high-grade st. steel Cable with connector 0.3 m · Output function [Hz] Drawing no. · 2-wire · DC PNP/NPN · Wiring diagram no. 23 · Connector groups 97, 99, 100 high-grade st. steel Cable with connector 0.3 m · Output function Iload · 2-wire · DC PNP/NPN · Wiring diagram no. 21 · Connector groups 97, 99, 100 high-grade st. steel Cable with connector 0.3 m · Output function f · 2-wire · DC PNP/NPN · Wiring diagram no. 23 · Connector groups 97, 99, 100 high-grade st. steel Cable with connector 0.3 m · Output function M12 / L = 40 Protection [V] Cable with connector 0.3 m · Output function M8 / L = 45 Ub 10...36 IP 67 25 100 174 IIR203 · 2-wire · DC PNP/NPN · Wiring diagram no. 23 · Connector groups 97, 99, 100 high-grade st. steel 10...36 IP 67 25 100 174 IIR206 · 2-wire · DC PNP/NPN · Wiring diagram no. 24 M8 / L = 45 2f high-grade st. steel 10...36 IP 67 150 100 175 IER204 M12 / L = 40 4f high-grade st. steel 10...36 IP 67 75 100 176 IFR204 M18 / L = 40 6f high-grade st. steel 10...36 IP 67 50 100 177 IGR204 M30 / L = 40 12 f high-grade st. steel 10...36 IP 67 25 100 178 IIR204 You can find wiring diagrams and scale drawings from page 114 99 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 5 m · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 2-wire · DC PNP/NPN · Wiring diagram no. 24 M8 / L = 45 2f high-grade st. steel 10...36 IP 67 150 100 175 IER205 M12 / L = 40 4f high-grade st. steel 10...36 IP 67 75 100 176 IFR205 M18 / L = 40 6f high-grade st. steel 10...36 IP 67 50 100 177 IGR205 M30 / L = 40 12 f high-grade st. steel 10...36 IP 67 25 100 178 IIR205 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Electromagnetic field immune sensors with correction factor K = 1 Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material Ub Protection [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 / L = 65 3f brass 10...30 IP 67 4000 200 179 IFW200 M12 / L = 65 8 nf brass 10...30 IP 67 4000 200 180 IFW201 M12 connector · Output function 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, M18 / L = 65 5f brass 10...30 IP 67 2000 200 155 IGW200 M18 / L = 65 12 nf brass 10...30 IP 67 2000 200 156 IGW201 M30 / L = 65 10 f brass 10...30 IP 67 1000 200 157 IIW200 M30 / L = 65 22 nf brass 10...30 IP 67 1000 200 181 IIW201 40 x 40 x 54 20 f PA (polyamide) 10...36 IP 67 200 200 94 IM5119 Product selectors and further information can be found at: www.ifm.com 100 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function 110, 135, 136 Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5120 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5129 M12 connector · Output function 40 x 40 x 54 · 3-wire · DC PNP · Wiring diagram no. 8 · Connector groups 97, 98, 99, 100 20 f PA (polyamide) M12 connector · Output function 10...36 IP 67 200 200 94 IM5124 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 97, 98, 99, 100 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5125 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 200 200 94 IM5126 M12 connector · Output function 135, 136 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 40 x 40 x 54 20 f PA (polyamide) 10...36 IP 67 200 200 65 IM5132 40 x 40 x 54 35 nf PA (polyamide) 10...36 IP 67 200 200 65 IM5133 40 x 40 x 54 40 nf PA (polyamide) 10...36 IP 67 / IP 69K 200 200 65 IM5135 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Electromagnetic field immune sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material [V] · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 / L = 60 2f brass 10...36 IP 67 1000 250 182 IF5670 M12 / L = 60 2f brass 10...36 IP 67 1000 250 182 IF5750 You can find wiring diagrams and scale drawings from page 114 101 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 97, 98, 99, 100 M12 / L = 60 4 nf brass 10...36 IP 67 1000 250 183 IF5675 M12 / L = 60 4 nf brass 10...36 IP 67 1000 250 183 IF5751 M18 / L = 60 5f brass 10...36 IP 67 700 250 63 IG5647 M18 / L = 60 5f brass 10...36 IP 67 700 250 63 IG5667 M30 / L = 60 10 f brass 10...36 IP 67 250 250 184 II5503 40 x 40 x 118 15 f modified PPE 10...60 IP 67 50 200 185 IV5025 M12 connector · Output function 92 x 80 x 40 · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 97, 98, 99, 100 50 f PPE 10...36 IP 67 70 250 99 ID5059 Material Ub Protection f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for mobile applications Type Dimensions Sensing range [mm] [mm] Cable 6 m · Output function M12 / L = 79 Cable 6 m · Output function M12 / L = 79 Cable 6 m · Output function M12 / L = 79 [V] · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 4f stainless steel 10...36 IP 67 / IP 69K 400 100 186 IFM207 IP 67 / IP 69K 400 200 186 IFM209 100 187 IFM208 · 3-wire · DC PNP · Wiring diagram no. 3 4f stainless steel 10...60 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 7 nf stainless steel 10...36 IP 67 / IP 69K Product selectors and further information can be found at: www.ifm.com 102 300 Inductive sensors Type Dimensions Sensing range [mm] [mm] Cable 6 m · Output function M12 / L = 79 7 nf 4f 4f Cable 6 m · Output function M18 / L = 81 Cable 6 m · Output function M18 / L = 81 Cable 6 m · Output function M18 / L = 81 Cable 6 m · Output function M18 / L = 81 7 nf [Hz] [mA] 300 200 Drawing no. Order no. high-grade st. steel 10...60 IP 67 / IP 69K 187 IFM210 high-grade st. steel 10...36 IP 67 / IP 69K 400 100 188 IFM203 high-grade st. steel 10...60 IP 67 / IP 69K 400 200 188 IFM205 high-grade st. steel 10...36 IP 67 / IP 69K 300 100 113 IFM204 200 113 IFM206 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 135, 136 7 nf stainless steel 10...60 IP 67 / IP 69K 300 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 8f stainless steel 10...36 IP 67 / IP 69K 200 100 189 IGM202 IP 67 / IP 69K 200 200 189 IGM206 · 3-wire · DC PNP · Wiring diagram no. 3 8f stainless steel 10...60 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 12 nf stainless steel 10...36 IP 67 / IP 69K 200 100 190 IGM203 IP 67 / IP 69K 200 200 190 IGM207 · 3-wire · DC PNP · Wiring diagram no. 3 12 nf M12 connector · Output function 135, 136 M18 / L = 70 Iload · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups M12 connector · Output function M12 / L = 70 [V] f · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 135, 136 M12 connector · Output function 135, 136 M12 / L = 70 Protection · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups M12 connector · Output function M12 / L = 70 Ub · 3-wire · DC PNP · Wiring diagram no. 3 M12 connector · Output function 135, 136 M12 / L = 70 Material stainless steel 10...60 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 8f stainless steel 10...36 IP 67 / IP 69K 200 100 150 IGM200 You can find wiring diagrams and scale drawings from page 114 103 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M18 / L = 70 8f Cable 6 m · Output function M30 / L = 81 Cable 6 m · Output function M30 / L = 81 Cable 6 m · Output function M30 / L = 81 Cable 6 m · Output function M30 / L = 81 12 nf 12 nf 12 f stainless steel 10...60 IP 67 / IP 69K stainless steel 10...36 IP 67 / IP 69K stainless steel 10...60 IP 67 / IP 69K stainless steel 10...36 [mA] Order no. 200 200 150 IGM204 200 100 191 IGM201 200 200 191 IGM205 IP 67 / IP 69K 100 100 192 IIM202 12 f stainless steel 10...60 IP 67 / IP 69K 100 200 192 IIM210 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 22 nf stainless steel 10...36 IP 67 / IP 69K 100 100 193 IIM203 IP 67 / IP 69K 100 200 193 IIM211 · 3-wire · DC PNP · Wiring diagram no. 3 22 nf stainless steel 10...60 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 12 f stainless steel 10...36 IP 67 / IP 69K 100 100 16 IIM200 16 IIM208 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 135, 136 12 f stainless steel 10...60 IP 67 / IP 69K 100 200 · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups 22 nf stainless steel 10...36 IP 67 / IP 69K Product selectors and further information can be found at: www.ifm.com 104 [Hz] Drawing no. · 3-wire · DC PNP · Wiring diagram no. 3 M12 connector · Output function 135, 136 M30 / L = 70 Iload · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 35 M12 connector · Output function M30 / L = 70 [V] f · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 135, 136 M12 connector · Output function 135, 136 M30 / L = 70 Protection · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 31 · Connector groups M12 connector · Output function M18 / L = 70 Ub · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 135, 136 M12 connector · Output function 135, 136 M18 / L = 70 Material 100 100 17 IIM201 Inductive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M30 / L = 70 40 x 12 x 26 40 x 12 x 26 Protection [V] stainless steel f Iload [Hz] [mA] Drawing no. Order no. 10...60 IP 67 / IP 69K 100 200 17 IIM209 IP 67 70 – 89 IN5281 IP 67 70 – 89 IN5282 · 2-wire · DC PNP · Wiring diagram no. 25 4 nf Cable 3 m · Output function Ub · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 135, 136 22 nf Cable 3 m · Output function Material PBT 10...36 · 2-wire · DC PNP · Wiring diagram no. 26 4 nf PBT 10...36 f = flush / nf = non flush Fail-safe inductive sensors for series connection to IEC 62061 SILcl 3 and ISO 13849-1 PL e Type Length Enable zone [mm] [mm] Housing material Ub DC Protection [V] Response time in case of a safety request / enable time [ms] Drawing no. Order no. M12 connector · Wiring diagram no. 44 · Connector groups 107, 108, 135 55 3...6 nf high-grade st. steel 24 IP 68 / IP 69K ≤ 20 / ≤ 200 194 GG505S 65 1...4 f brass 24 IP 68 / IP 69K ≤ 20 / ≤ 200 195 GG507S 39 6...12 nf high-grade st. steel 24 IP 68 / IP 69K ≤ 20 / ≤ 200 196 GI505S 39 6...12 nf high-grade st. steel 24 IP 68 / IP 69K ≤ 20 / ≤ 200 196 GI506S 66 10...15 nf PPE 24 IP 65 / IP 67 ≤ 20 / ≤ 200 197 GM504S 66 10...20 nf PPE 24 IP 67 ≤ 20 / ≤ 200 197 GM505S f = flush / nf = non flush You can find wiring diagrams and scale drawings from page 114 105 Inductive sensors Inductive sensors for safety-related applications, 2 x OSSD, SIL 2, PL d Type Length Enable zone [mm] [mm] Housing material Ub DC Protection [V] Response time in case of a safety request / enable time [ms] Drawing no. Order no. M12 connector · Wiring diagram no. 45 · Connector groups 107, 108, 135 45 0.5...4 nf high-grade st. steel 24 IP 65 / IP 67 ≤1/≤1 113 GF711S 35 1...8 nf high-grade st. steel 24 IP 65 / IP 67 ≤1/≤1 198 GG711S 44.5 1...5 f brass 24 IP 65 / IP 67 ≤1/≤1 199 GG712S ≤5/≤5 200 GG851S M12 connector · Wiring diagram no. 27 · Connector groups 107, 108, 135 53 > 10 f brass 24 IP 65 / IP 67 M12 connector · Wiring diagram no. 45 · Connector groups 107, 108, 135 30 1...15 nf high-grade st. steel 24 IP 65 / IP 67 ≤ 10 / ≤ 1 201 GI711S 45 1...10 f high-grade st. steel 24 IP 65 / IP 67 ≤ 10 / ≤ 1 202 GI712S Response time in case of a safety request / enable time [ms] Drawing no. Order no. f = flush / nf = non flush Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e Type Length Enable zone [mm] [mm] Housing material Ub DC Protection [V] M12 connector · Wiring diagram no. 45 · Connector groups 107, 108, 135 39 6...12 nf high-grade st. steel 24 IP 68 / IP 69K ≤ 50 / ≤ 200 196 GI701S 66 10...15 nf PPE 24 IP 65 / IP 67 ≤ 50 / ≤ 200 197 GM701S 66 4...20 nf PPE 24 IP 65 / IP 67 ≤ 50 / ≤ 200 197 GM705S f = flush / nf = non flush Product selectors and further information can be found at: www.ifm.com 106 Inductive sensors Safety relays with relay outputs for fail-safe sensors Type Description Order no. Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · Housing materials: PA · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 · EN 574: type IIIC G1501S Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · Housing materials: PA · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 · EN 574: type IIIC G1502S Safety relays with solid state outputs for fail-safe sensors Type Description Order no. Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · Housing materials: PA · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 · EN 574: type IIIC G1503S Sensors with ATEX approval 1D / 2G Type Dimensions Sensing range [mm] [mm] Material Unom. at 1 KΩ Ub Internal capacit. Internal inductance f [V] [V] [nF] [μH] [Hz] Drawing no. Order no. Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 28 Ø 6.5 / L = 30 1f brass 8.2 DC 7.5...30 80 70 2000 203 NT5001 M8 / L = 30 1f brass 8.2 DC 7.5...30 80 70 2000 204 NE5001 M12 / L = 30 2f PBT 8.2 DC 7.5...30 140 340 1200 205 NF5001 M12 / L = 30 4 nf PBT 8.2 DC 7.5...30 140 130 1500 205 NF5003 M12 / L = 30 2f brass 8.2 DC 7.5...30 140 340 1200 205 NF5002 M12 / L = 30 4 nf brass 8.2 DC 7.5...30 140 130 1500 206 NF5004 M18 / L = 33 5f PBT 8.2 DC 7.5...30 145 45 720 207 NG5001 You can find wiring diagrams and scale drawings from page 114 107 Inductive sensors Type Dimensions Sensing range [mm] [mm] Material Unom. at 1 KΩ Ub Internal capacit. Internal inductance f [V] [V] [nF] [μH] [Hz] Drawing no. Order no. Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 28 M18 / L = 33 8 nf PBT 8.2 DC 7.5...30 155 50 300 207 NG5003 M18 / L = 33 5f brass 8.2 DC 7.5...30 145 45 720 207 NG5002 M18 / L = 33 8 nf brass 8.2 DC 7.5...30 155 50 300 208 NG5004 M30 / L = 41 10 f PBT 8.2 DC 7.5...30 145 140 450 209 NI5001 M30 / L = 41 15 nf PBT 8.2 DC 7.5...30 145 110 200 209 NI5003 M30 / L = 41 10 f brass 8.2 DC 7.5...30 145 140 450 209 NI5002 M30 / L = 41 15 nf brass 8.2 DC 7.5...30 145 110 200 210 NI5004 28 x 10 x 16 2f PBT 8.2 DC 7.5...30 80 110 800 211 NS5002 40 x 12 x 26 4 nf PBT 8.2 DC 7.5...30 110 135 400 212 NN5002 f = flush / nf = non flush Slot sensors for industrial applications Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. 213 N7S20A Cable 0.5 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 28 Special design – PBT – IP 67 5000 – Cable with connector 0.065 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 29 Special design – PBT – IP 67 Product selectors and further information can be found at: www.ifm.com 108 3000 – 214 N7S21A Inductive sensors Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. 215 N7S23A Cable 0.065 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 30 special design – PBT – IP 67 3000 – Switching amplifiers with ATEX approval Type Description Order no. Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1121/230VAC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 1-channel · Relay output · Programmable output function · Short-circuit and wire monitoring N0031A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1221/115VAC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 2-channel · Relay outputs · Programmable output function · Short-circuit and wire monitoring N0032A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1221/230VAC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 2-channel · Relay outputs · Programmable output function · Short-circuit and wire monitoring N0033A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1121/24VDC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 1-channel · Relay output · Programmable output function · Short-circuit and wire monitoring N0530A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1122/24VDC/TR/1D/1G · ATEX approval · Group II, category (1) G D · 1-channel · Transistor outputs · Programmable output function · Short-circuit and wire monitoring N0531A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1223/24VDC/OK/1D/1G · ATEX approval · Group II, category (1) G D · 2-channel · Optocoupler output · Programmable output function · Short-circuit and wire monitoring N0532A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1221/24VDC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 2-channel · Relay outputs · Programmable output function · Short-circuit and wire monitoring N0533A Switching amplifier for Namur sensors according to 94/9/EG (ATEX) · NV1222/24VDC/TR/1D/1G · ATEX approval · Group II, category (1) G D · 2-channel · Transistor outputs · Programmable output function · Short-circuit and wire monitoring N0534A Accessories for sensors with smooth sleeve Type Description Order no. Mounting clip · Ø 12 mm · for smooth body switches - Ø 12 mm · Form V · Housing materials: V4A E11530 Mounting clip · Ø 18 mm · for smooth body switches - Ø 18 mm · Form V · Housing materials: V4A E11531 You can find wiring diagrams and scale drawings from page 114 109 Inductive sensors Type Description Order no. Mounting clamp · Ø 4 mm · Housing materials: TPE E10204 Mounting clamp · Ø 6.5 mm · Housing materials: PPE E10014 Mounting clamp · Ø 20 mm · Housing materials: PA E10192 Mounting clamp · Ø 34 mm · Housing materials: PA E10193 Mounting clamp · Ø 20 mm · Housing materials: Mounting clamp: PBT / socket screw: steel galvanised E10016 Mounting clamp · Ø 34 mm · Housing materials: PBT E10017 Limit plungers · for type Ø 6.5 mm · with Sn = 1 mm f · Housing materials: Limit plungers: free cutting steel / plunger: C45K hardened on front / nut: brass nickel-plated E10155 Accessories for threaded M8 housings Type Description Angle bracket · for type M8 · Housing materials: stainless steel E10734 Mounting clamp · Ø 8 mm · Housing materials: aluminium black anodised E10221 Mounting clamp · Ø 8 mm · with end stop · for type M8 · Housing materials: PC E11521 Mounting sleeve · M12 x 1 - Ø 8 mm · 32 mm · with end stop · for type M8 · Housing materials: brass special coating E10848 Mounting sleeve · M12 x 1 - Ø 8 mm · 42 mm · with end stop · for type M8 · Housing materials: brass special coating E10849 Limit plungers · for types M8 x 1 · with Sn = 1 mm f, 2 mm f and 3 mm f · Housing materials: Limit plungers: free cutting steel / plunger: C45K hardened on front / nut: brass nickel-plated E10154 Product selectors and further information can be found at: www.ifm.com 110 Order no. Inductive sensors Accessories for threaded M12 housings Type Description Order no. Angle bracket · for type M12 · Housing materials: stainless steel E10735 Mounting clip · Form O · for type M12 · Housing materials: stainless steel E11533 Mounting clamp · Ø 12 mm · Housing materials: PBT E10015 Mounting clamp · Ø 12 mm · with end stop · for type M12 · Housing materials: PC E11047 Mounting sleeve · M16 x 1 - Ø 12 mm · 45 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10741 Mounting sleeve · M16 x 1 - Ø 12 mm · 34 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10806 Mounting sleeve · M16 x 1 - Ø 12 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E11114 Accessories for threaded M18 housings Type Description Order no. Angle bracket · for type M18 · Housing materials: stainless steel E10736 Mounting clip · Form O · for type M18 · Housing materials: stainless steel E11534 Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076 Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048 Mounting sleeve · M24 x 1.5 - Ø 18 mm · 58 mm · with end stop · for type M18 · Housing materials: brass nickel-plated E10742 You can find wiring diagrams and scale drawings from page 114 111 Inductive sensors Type Description Order no. Mounting sleeve · M24 x 1.5 - Ø 18 mm · 36 mm · with end stop · for type M18 · Housing materials: brass nickel-plated E10807 Mounting sleeve · M22 x 1 - Ø 18 mm · with end stop · for type M18 · Housing materials: brass white bronze coated E11115 Plastic nut for flow plate · M18 x 1 · Housing materials: POM E19503 Accessories for threaded M30 housings Type Description Order no. Angle bracket · for type M30 · Housing materials: stainless steel E10737 Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077 Mounting clamp · Ø 30 mm · with end stop · for type M30 · Housing materials: PC E11049 Mounting sleeve · M36 x 1.5 - Ø 30 mm · 58 mm · with end stop · for type M30 · Housing materials: brass nickel-plated E10743 Mounting sleeve · M36 x 1.5 - Ø 30 mm · 36 mm · with end stop · for type M30 · Housing materials: brass nickel-plated E10808 Accessories for rectangular housings Type Description Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730 Protective bracket · for cable units · for type IW, KW, OW · Housing materials: stainless steel 316Ti / 1.4571 E20813 Product selectors and further information can be found at: www.ifm.com 112 Order no. Inductive sensors System components Type Description Order no. Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20718 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20719 Angle bracket · Clamp mounting · for type IW, OW, KQ5 · Housing materials: stainless steel 316Ti / 1.4571 E20811 Protective bracket · for cable units · for type IW, KW, OW · Housing materials: stainless steel 316Ti / 1.4571 E20813 Protective bracket · for devices with M8 connection · for type OW, IW · Housing materials: stainless steel 316Ti / 1.4571 E20814 Mounting set · Ø 12.2 mm · Clamp mounting · free-standing M8 · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20856 Mounting set · Ø 12.2 mm · Clamp mounting · free-standing M8 · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20857 Mounting set · Ø 12.2 mm · Clamp mounting · free-standing M8 · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20860 Mounting set · Ø 12.2 mm · Clamp mounting · free-standing M8 · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20861 Mounting set · Ø 12.2 mm · Clamp mounting · aluminium profile · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20864 Mounting set · Ø 12.2 mm · Clamp mounting · aluminium profile · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20865 Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20866 Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20867 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20869 You can find wiring diagrams and scale drawings from page 114 113 Inductive sensors Type Description Order no. Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20870 Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20873 Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20874 Mounting set · Ø 30.2 mm · Clamp mounting · aluminium profile · for type OI, II, KI · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20875 Wiring diagrams Core colours BN brown BU blue 5 10 15 1 1 BK black 2 WH white 3 L+ L+ BN L1 L+ BU N L 4 2 4: 2: L 3 L 1 1 6 11 16 L+ 4 3 /3 1 L 1 L+ /3 L1 L+ /4 N L 3 L1 L+ N L 1 L+ 4 /4 2 3 L 2 L 2 1 7 12 17 L+ 2 3 BN L 1 L+ BK BU L+ 2 4 3 L 1 L 3 BN 8 13 18 L+ BK BU 1 L L+ BN 2 L1 3 L1 L+ 2 N L 4 4: 2: BU 3 N L 4 1 9 14 19 L+ 4 3 L 1 3 AS-i+ AS-i BN BU Product selectors and further information can be found at: www.ifm.com 114 L1 L+ N L 1 L+ 4 3 L Inductive sensors Wiring diagrams 20 23 BN 26 L+ 29 3 L+ L BN 4 L L+ BU BK L+ 2 L 3 WH BK : WH: BU L 21 24 1 27 BN L+ 4 L+ BU L 22 L 25 BK 1 L+ 2 A2 3 L 4 A1 BN +24 V + IN2 1 GND BU IN1 28 BN L+ BK 30 BU L BN L+ BU L 31 + 34 1 1 L+ WH L+ L+ BK L+ 4 4 3 L BK L 32 L WH L 35 1 1 L+ BN L+ L+ PNP 3 BN L+ BK 4 L NPN 4 BK L 33 L BU L 36 1 L+ 4 L+ 1 L+ 1 L+ 4 4 L 1 L 3 L 4 L 115 Inductive sensors Wiring diagrams 37 41 /3 /4 2 1 /4 L+ /3 2 PNP L+ 1 L BN NPN L+ BU L 38 BN BU L L 42 1 1 L+ 2 2 3 3 4 L+ 1 5 2 L+ 2 4 L 5 1 L L+ L L 39 43 AC; DC NPN 1 2 AC; DC NPN N L+ DC PNP 1 2 3 3 4 4 L1 L 5 5 1 2 DC PNP 4 N L+ 1 4 1 L L1 L L+ 3 44 4 L 5 5 L 40 4 4 L+ 1 2 L+ 3 1 L+ 1 L+ (BN) 2 TE (WH) 3 L (BU) 4 A (BK) 1 L+ (BN) 2 A1 (WH) 3 L 4 A2 (BK) +24 V OUT GND 1 IN L+ 4 PNP 3 L NPN 3 L 45 +24 V IN1 (BU) GND IN2 Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 45 34 32 M12 x1 4 LED 4 x 90° Product selectors and further information can be found at: www.ifm.com 5 M12 x1 M12 x1 M12 x1 50 39 32 4 17 116 L+ 17 LED 4 x 90° 1 L+ L Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 9 3 70 59 56,5 49 70 4 LED 4 x 90° M18 x1 M12 x1 M12 x1 M12 x1 59 50 17 4 LED 4 x 90° 24 4 10 70 59 45 70 60 58 40 M12 x1 M12 x1 5 10 17 M18 x1 M12 x1 4 LED 4 x 90° 4 LED 4 x 90° 5 46 38 35 30 24 11 M8x1 M12 x1 70 59 56 49 4 M18 x1 M12 x1 17 LED 4 x 90° 4 LED 4 x 90° 6 12 5 72 61 60 53 42 M8x1 M12 x1 51 43 40 30 24 4 17 8 M18 x1 M12 x1 LED 4 x 90° 4 7 LED LED 4 x 90° 46 35 33 30 M18 x1 46 35 33 29 M8x1 24 M18 x1 M12 x1 13 4 LED 4 x 90° 24 8 4 24 LED 4 x 90° 14 M18 x1 50 39 37 33 4 24 M12 x1 LED 4 x 90° M30 x1,5 10 M12 x1 51 40 38 25 LED 4 x 90° 5 36 117 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 21 15 50 39 37 15 19 45 36 M8x1 M30 x1,5 M12 x1 5 LED 4 x 90° M5x0,5 22 2,7 LED 4 x 90° 8 36 22 16 41 34 70 59 57 53 M 8 x1 M5 x0,5 20 2 M12 x1 M30 x1,5 LED 4 x 90° 23 5 36 LED 4 x 90° 7 35 27 M8x1 17 70 59 57 38 13 M12 x1 M30 x1,5 15 24 50 42 39 5 36 M8x1 LED 4 x 90° 4 LED 18 4 LED 30 25 20 13 M5x0,5 25 20 M8x1 2,7 LED 8 4 LED 13 19 26 M5x0,5 23 18 16 M8x1 27 25 2,7 LED 8 4 LED 13 20 27 M 5 x0,5 2 M8x1 LED 27 18 7 LED 13 Product selectors and further information can be found at: www.ifm.com 118 6,5 27 24 15,5 4 8 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 35 28 50 42 36,5 40 32,5 28,5 4 LED M8x1 M8x1 M8x1 2,5 4 13 13 LED 4 x 90° 29 2 36 M8x1 35 40 32,5 23 8 4 30 M8x1 13 M8x1 LED 4 LED 4 x 90° 27 37 4 LED 13 8 M8x1 2 13 40 32,5 28,5 50 42,5 38,5 M8x1 M8x1 31 4 13 M8x1 M8x1 LED 4 x 90° 4 LED 4 x 90° 38 13 53 34 27 LED 4 13 M8x1 M8x1 30 22,5 18,5 M8x1 M12 x1 32 4 LED 4 x 90° 13 39 62 50 40 4 LED 4 x 90° 13 M8x1 M8x1 30 22,5 12 8 M8x1 M12 x1 33 4 40 LED 4 x 90° 13 50 39 34 50 42 39 41 62 47 38 LED 4 x 90° 2 M8x1 13 M12 x1 4 LED 4 x 90° 4 13 M8x1 M8x1 LED 4 x 90° M8x1 M12 x1 25 4 13 119 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 49 42 83 74 62 47 40 M12 x1 4 LED 4 x 90° 4 M12 x1 M8x1 M12 x1 60 47 4 13 17 LED 43 50 18 69 38 27 M18 x1 9 M8x1 M12 x1 42 38 4 LED 4 13 LED 44 24 51 18 35 24 M18 x1 80 69 58 9 9 M12 x1 18 4 LED 17 4 LED 24 45 52 71 60 50 18 38 27 M18 x1 8 9 9 M12 x1 18 4 17 LED 4 LED 24 46 53 18 35 24 18 80 69 50 8 9 4 LED M18 x1 9 M12 x1 4 17 4 LED 24 47 54 71 60 46 70 59 57 50 4 M12 x1 4 17 LED M18 x1 9 M12 x1 18 LED 4 x 90° 24 4 48 55 83 74 76 67 55 42 17 M18 x1 4 LED LED Product selectors and further information can be found at: www.ifm.com 120 8 M12 x1 M12 x1 M12 x1 60 51 24 4 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 62 56 78 68 110 LED 81 53 35 M30 x1,5 4 24 15 M12 x1 30 20 M18 x1 50 5 36 LED 79 63 57 18 60 49 47 40 45 M12 x1 M30 x1,5 9 M18 x1 31 4 5 LED LED 4 x 90° 36 58 24 64 60 49 47 30 81 18 M18 x1 4 5 36 LED 10 M12 x1 9 M30 x1,5 67 59 24 LED 4 x 90° 59 65 18 66 54 46 40 45 31 15 29,5 5 36 5,5 LED 30 2 9 M30 x1,5 40 1 60 46 67 44 9 M30 x1,5 5,5 15 1: LED yellow, 2: LED green 5 36 LED 2 30 M12 x1 81 18 66 61 30 LED M30 x1,5 53 50 M12 x1 4 20 78 68 67 36 5 16 4 23 LED LED 121 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 76 68 30 22,5 27 LED 6,5 M8x1 3 17 LED 4 x 90° 69 77 27 50 34,5 8 6,5 M8x1 4 15,4 LED 4 x 90° LED 70 78 45 18 36 77 66 55 20 9 M8x1 4 22 LED 4 x 90° LED 71 79 41 34 4 20 M 8 x1 93 81 55 20 M12 x1 LED 4 x 90° 72 LED 4 x 90° 6,5 35 27 80 LED 92 LED 20 63 30 73 6,5 19 15 62 81 74 34 27 9 LED 82 72 60 6,5 3,5 18 LED 75 82 M8 x1 40 6,5 49 98 LED 70 38 34 LED 4 x 90° 60 Product selectors and further information can be found at: www.ifm.com 122 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 87 25 2,8 5 16 3,1 3,1 22,2 27,8 3,5 5,6 10,2 2,8 83 3,5 M1,6 x 0,35 LED 8 10,4 14 LED 2,75 5,5 14 88 1: sensing face 16 10,4 3,1 10,2 3,5 5,6 40 4 2,75 2,8 84 1 IL 5002 IL 5003 LED M8x1 M8x1 5 M3 3,1 27,8 36,8 8 5 22,2 20 LED LED 20 10 89 1: sensing face LED 85 26 LED 13 10 6 3,2 4 5 12 52 40 M8x1 3,2 32 40 8 5 16 20 1 IL 5004 IL 5005 LED LED 20 1 4 1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact with counterpart. 5 M3 18 10 90 1: sensing face LED 86 26 13 LED 4 18 4 1 3,1 1 22,2 8x 5,6 M 27,8 16 3,2 32 40 9 3,5 2,8 3,1 10 6 5,1 5 3,2 12 LED 16 LED 10,2 10,4 2,75 1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact with counterpart. 123 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 91 95 60 LED 10 15 121 4 40 4 4,2 8 3,2 101 27 16 30 32 5,1 77 10,4 5,3 3 4 3,2 24 20 28 36 13 LED 92 45,6 61,5 LED 60 10 LED 4 96 LED 20 28 36 4,2 8 3,2 15 118 12 16 4 3 4 3,2 24 40 40 5,3 30 13 93 58 7,3 LED 5,3 73 60 10 8 3,2 60 4 4,2 15 46 3,2 20 28 36 M8x1 12 LED 16 24 97 LED 4 118 40 29 3 4 40 94 58 7,3 13 30 7 40 LED LED 60 46 29,5 30 2 5,3 5,3 66 54 46 40 5,5 98 46 1 90 40 9,3 5,5 12 5,5 45 60 30 M12 x1 8 16 30 LED pot. 2 45 1: LED yellow, 2: LED green Product selectors and further information can be found at: www.ifm.com 124 7,5 16 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 103 99 20 8 92 6 5,5 4,5 10 4,5 11 15 15 65 80 M12 x1 5 10,1 20 40 10 42,5 40 60 112 9,3 M12 x1 4 7,5 65 17 1 26 35 LED 1: mounting on DIN rail 1: Sensitivity, 2: Output function, 3: Pulse stretching time 100 104 20 8 105 9,3 40 5,5 40 6 5 15,1 11 15 15 4,5 10 42,5 4,5 10 65 80 pot. LED 60 18 27 12 M12 x1 4 7,5 65 26 35 16 1: Sensitivity, 2: Output function, 3: Pulse stretching time 101 105 123 105 9,3 20 8 40 5,5 40 12 6 5 11 15 15 4,5 10 42,5 4,5 10 pot. LED 60 65 80 M12 x1 18 27 20,1 7,5 65 16 M12 x1 4 26 35 102 1: Sensitivity, 2: Output function, 3: Pulse stretching time 120 pot. 9,5 6 106 30 15 45 LED 21 20 8 5 25,1 60 10 42,5 4,5 15 10 11 100 4,5 15 10 60 80 40 6 M12 x1 4 26 35 1: Sensitivity, 2: Output function, 3: Pulse stretching time 125 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 111 107 110 66 70 40 40 20 80 70 M12x1 34 M12 x1 5 17 LED LED 10 51 5,4 30 20 4,5 16 5,4 108 33 6 46 61 20 17 12 3 5,5 13 50 39 32 5 M12 x1 M12 x1 45 70 112 9 4 17 M8x1 LED 4 x 90° 113 1: sensing face, 2: LED operating status, 3: LED switching status 70 59 45 13 3 5,5 12 4 LED 45 70 5 M12 x1 20 17 M12 x1 109 17 114 70 59 50 47 12 M12 x1 M12 x1 5 LED 4 x 90° 1 1: sensing face, 2: LED operating status 1: locating groove 110 115 66 40 50 37 29 M12x1 1/2" 20UNF 2A LS100 34 40 17 4 LED LED 5,4 30 20 10 8,5 5,4 6 33 46 61 Product selectors and further information can be found at: www.ifm.com 126 17 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 122 116 61 44 28 70 59 57 38 17 M30 x1,5 4 LED 4 x 90° LED 4 x 90° 117 51 40 38 25 15 1/2"-20UNF-2A 5 M12 x1 5 5 36 123 10 42 35 M18 x1 M12 x1 59 16 15 24 5 LED 4 x 90° M30 x1,5 4 118 5 LED 4 x 90° 70 59 56 39 36 124 10 42 35 31 M18 x1 M12 x1 59 M30 x1,5 4 24 5 LED 4 x 90° 119 5 LED 4 x 90° 57 39,5 33 29 125 24 12 M12 x1 5 M18 x1 60 49 40 4 LED 4 x 90° 36 LED 4 x 90° 120 126 62 44,5 38 24 60 49 40 M12 x1 M12 x1 M18 x1 10 4 LED 4 x 90° 4 24 121 LED 4 x 90° 17 127 50 39 37 15 18 5 10 M12 x1 M12 x1 M30 x1,5 M12 x1 LED 4 x 90° 70 59 40 4 LED 4 x 90° 17 36 127 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 134 128 70 59 57 35 59 50 40 M12 x1 M12 x1 M18 x1 M12 x1 15 4 17 4 LED 4 x 90° 24 135 129 44 25 70 58 57 50 M12 x1 4 4 M12 x1 M30 x1,5 LED LED 4 x 90° 136 5 36 17 59 48 41 33 22,5 4 M12 x1 M30 x1,5 LED LED 4 x 90° 4 M12 x1 70 59 57 27,5 M12 x1 130 17 137 5 36 76 67 55 50 M12 x1 M18 x1 131 70 LED M8x1 M12 x1 40 4 24 4 138 13 90 80 69 50 2,5 M8x1 M12 x1 8 M12 x1 55 43 31,5 M18 x1 132 LED 4 24 4 LED 4 x 90° 13 139 45 33 32 133 8 M12 x1 25 LED M18 x1 M12 x1 44 4 LED 4 x 90° 4 24 17 140 M12 x1 M18 x1 90 80 69 58 LED Product selectors and further information can be found at: www.ifm.com 128 24 4 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 147 141 77 67 56 42 60 49 47 28 LED M30 x1,5 4 24 15 M12 x1 M12 x1 M18 x1 8 5 LED 4 x 90° 36 142 148 92 82 66 59 LED 4 LED 4 x 90° 5 36 143 M8x1 M8x1 M12 x1 M30 x1,5 50 42,5 30 13 149 92 82 60 49 33 M12 x1 M30 x1,5 M12 x1 15 LED M8x1 66 44 4 LED 4 x 90° 13 5 36 150 144 M8x1 M12 x1 M18 x1 8 M12 x1 50 39 17 70 59 57 50 4 LED 4 x 90° 4 13 LED 4 x 90° 145 24 151 M8x1 M12 x1 4 4 LED 4 x 90° LED 4 x 90° 17 146 M8x1 65 57,3 46,5 5 M12 x1 60 49 35 13 152 65 57,3 38,5 M30 x1,5 M12 x1 LED 4 x 90° 5 M8x1 8 M8x1 60 49 47 43 4 LED 4 x 90° 13 36 129 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 160 153 65 54 45 M8x1 42 35 M12 x1 M12 x1 LED 4 4 LED 4 x 90° 13 M12 x1 17 42 154 65 54 35 161 M12 x1 M12 x1 10 LED 54 M12 x1 40 4 LED 4 x 90° 17 4 17 155 162 65 54 52 45 54 LED M12 x1 M18 x1 M12 x1 40 4 17 4 24 M12 x1 LED 4 x 90° 156 42 65 54 52 35 163 10 LED 4 x 90° M18 x1 M12 x1 M18 x1 54 52 4 24 4 24 LED 157 65 53 52 49 164 60 M12 x1 M12 x1 M30 x1,5 41 4 LED 5 LED 4 x 90° 36 17 158 165 65 54 52 32 LED M18 x1 58 52 5 LED 4 x 90° 4 24 M12 x1 M12 x1 M30 x1,5 15 36 42 159 LED M8x1 42 35 4 13 Product selectors and further information can be found at: www.ifm.com 130 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 170 166 65 55 44 40 66 54 46 40 4 5,5 24 29,5 LED 30 2 M12 x1 M18 x1 40 167 LED 46 LED 26 5,5 30 M12 x1 26 43 171 4 3 25 LED 45 35 M8 x1 6 4 7 13 168 ≤ 49,3 LED 26 M12 x1 42,5 26 M12 x1 14 172 43 40 30 LED 25 M12 x1 4 3 6 4 11 169 17 5,5 40 M12 x1 49 54 46 40 30 29,5 14 173 40 30 LED M18 x1 30 4 17 24 M12 x1 49 M12 x1 5,5 LED 46 14 131 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 180 174 40 30 65 54 42 10 M12 x1 M12 x1 M30x1,5 LED 4 5 28 LED 4 x 90° 36 17 181 65 53 52 34 14 15 M12 x1 175 M30 x1,5 M12 x1 49 LED 45 35 5 M8 x1 LED 4 x 90° 36 4 7 182 13 60 51 48 40 176 M12 x1 M12 x1 40 30 4 M12 x1 LED LED 4 x 90° 17 4 11 17 183 60 51 48 36 177 4 M18 x1 M12 x1 M12 x1 40 30 LED 4 LED 4 x 90° 17 4 17 184 24 M30x1,5 M12 x1 40 30 LED 28 M30 x1,5 60 48 46,5 40 178 5 LED 4 x 90° 5 36 36 185 179 LED 139 65 54 52 118 M12 x1 M12 x1 M12 x1 4 17 LED 58 7,3 30 13 5,3 5,3 LED 4 x 90° 40 40 60 Product selectors and further information can be found at: www.ifm.com 132 46 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 192 186 81 79 64 57 53 4 LED 4 x 90° M30 x1,5 5 5,4 M12 x1 62 53 17 LED 4 x 90° 5 36 187 193 79 62 48 81 5 5,4 M12 x1 64 57 38 15 LED 4 x 90° 5 17 M30 x1,5 4 188 LED 4 x 90° 70 59 50 M12 x1 M12 x1 194 90,5 79 55 10 M12 x1 17 M18 x1 4 LED 5 36 4 189 24 LED 8 x 45° 81 195 64 57 50 M18 x1 90,5 M12 x1 4 LED 4 x 90° M18 x1 65 24 4 24 LED 8 x 45° 190 196 81 64 57 40 M30 x1,5 24 15 M12 x1 M18 x1 4 LED 4 x 90° 80 69 67 39 10 LED 4 x 90° 36 5 191 70 59 57 40 M12 x1 M18 x1 10 4 LED 4 x 90° 24 133 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 202 197 66 40 70 57 45 M30x1,5 M12x1 34 M12 x1 40 17 LED 5,4 36 5 203 6,5 30 20 10 8,5 LED 5,4 30 33 6 46 61 204 198 M8x1 30 70,5 57 35 10 M12 x1 M18 x1 4 13 4 LED 2 x 180° 24 205 199 2 M12 x1 70,5 57 45 4 M12 x1 M18 x1 17 206 4 LED 2 x 180° 30 24 2 30 4 M12 x1 200 4 86,5 75,5 73,5 17 M12 x1 M18 x1 53 207 4 LED 4 x 90° 2 33 M18 x1 24 201 4 24 70 57 45 208 LED 4 x 90° 36 2 33 8 M18 x1 M12x1 M30x1,5 15 5 4 24 Product selectors and further information can be found at: www.ifm.com 134 Inductive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 213 209 41 2 8 15 11 6 M30 x1,5 2 1,5 3,7 5 15 11 36 210 214 41 2 15 15 10 M30 x1,5 19 5 3,5 5 2 36 1,8 10 211 2,8 16 3,1 215 19 5 3,5 2,75 2 10,4 15 10 3,1 27,8 22,2 5,6 3,5 10,2 1,8 10 212 26 12 16 3,2 32 6,2 40 10 3,2 4 5 18 4 1 1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact with counterpart. 135 Capacitive sensors High operational reliability due to increased noise immunity. Sensing range adjustable by means of a potentiometer or pushbutton. Plastic or metal housing for different applications. Variable: connector, connection cable or connection terminals. Assortment of tank and sight glass mounting acccessories. Capacitive sensors Capacitive sensors are used for the non-contact detection of any objects. In contrast to inductive sensors, which only detect metallic objects, capacitive sensors can also detect non-metallic materials. Typical applications are in the wood, paper, glass, plastic, food and chemical industries. In a packaging system, capacitive sensors monitor that the contents of a cardboard box is complete, for example, or check the presence of non-metallic caps. Another application is to monitor the conveying of sheets of glass on a roller conveyor. Operating principle The capacitance between the active electrode of the sensor and the electrical earth potential is evaluated. An approaching object influences the electrical alternating field between these two “capacitor plates” and, consequently, the capacitance. This applies to metallic and non-metallic objects. By means of the potentiometer or the pushbutton the user can set the sensitivity. Increased noise immunity When detecting objects, very small changes in capacitance must be evaluated and converted into switching signals. This makes high requirements for the electronics. The sensors must be designed so that they are insensitive to fluctuations of the parasitic basic capacitances, as these can amount to a multiple of the change in capacitance to be measured. Moreover, the sensors must be insensitive to electromagnetic interference which typically occurs in the application area. ifm electronic has developed future-oriented solutions to meet the high sensor requirements. A patented circuit concept efficiently prevents the mentioned problems and ensures reliable functioning for all relevant noise parameters. 136 Not only metal: Capacitive sensors detect almost all materials, here for example a log in a saw mill. Capacitive sensors System overview Page Sensors for industrial applications, DC 138 - 141 Sensors for industrial applications, AC and AC/DC 141 - 142 Sensors for the detection of conductive media through a wall 142 - 143 Sensors for the detection of granulates for the plastics industry, DC 143 - 144 Sensors for the detection of granulates for the plastics industry, AC / DC 144 Sensors with ATEX approval 144 - 145 Switching amplifiers with ATEX approval 145 - 146 Accessories mounting adapters 146 - 147 Accessories mounting components 147 Accessories mounting sets 148 Wiring diagrams 148 - 150 Scale drawings / drawing no. – CAD download: www.ifm.com 150 - 153 137 Capacitive sensors Sensors for industrial applications, DC Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M18 / L = 84 Ub Protection f Iload [Hz] [mA] IP 67 50 IP 67 50 [V] 8 nf Order no. PBT 10...36 250 1 KG5043 400 1 KG5047 · DC PNP/NPN · Wiring diagram no. 22 8 nf M12 connector · Output function PBT 10...55 · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11 M12 / L = 60 4f high-grade st. steel 10...36 IP 65 50 100 2 KF5001 M12 / L = 61 8 nf high-grade st. steel 10...36 IP 65 50 100 3 KF5002 M12 connector · Output function M12 / L = 60 Terminals · Output function M18 / L = 110 · DC NPN · Wiring diagram no. 3 · Connector groups 9, 10, 11 4f M18 / L = 93.8 8 nf Cable 2 m · Output function M30 / L = 81 Cable 2 m · Output function M30 / L = 81 10...36 IP 65 50 100 2 KF5013 PBT 10...36 IP 65 50 250 4 KG5041 · DC PNP · Wiring diagram no. 5 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 8 nf Terminals · Output function M18 / L = 110 high-grade st. steel · DC PNP · Wiring diagram no. 4 M12 connector · Output function 135, 136 PBT 10...36 IP 67 50 250 5 KG5057 IP 65 50 400 4 KG5040 IP 65 40 250 6 KI5002 IP 65 40 250 6 KI5001 · DC PNP/NPN · Wiring diagram no. 23 8 nf PBT 10...55 · DC PNP · Wiring diagram no. 1 15 nf PBT 10...36 · DC PNP · Wiring diagram no. 6 15 nf PBT 10...36 Product selectors and further information can be found at: www.ifm.com 138 Drawing no. · DC PNP · Wiring diagram no. 1 Cable 2 m · Output function M18 / L = 84 Material Capacitive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M30 / L = 81 Cable 2 m · Output function M30 / L = 81 Protection f Iload [Hz] [mA] IP 65 40 IP 65 IP 65 [V] 15 nf PBT Drawing no. Order no. 10...36 250 6 KI5015 40 250 6 KI5019 40 250 6 KI5207 · DC NPN · Wiring diagram no. 8 15 nf PBT 10...36 · DC PNP · Wiring diagram no. 24 15 nf PBT connector (DIN EN 175301-803) · Output function M30 / L = 92 Ub · DC NPN · Wiring diagram no. 7 Cable 2 m · Output function M30 / L = 81 Material 15 nf M12 connector · Output function 10...36 · DC PNP · Wiring diagram no. 9 · Connector group 30 PBT 10...36 IP 65 40 250 7 KI5038 · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12 M30 / L = 90 8f high-grade st. steel 10...36 IP 65 / IP 67 10 100 8 KI5085 M30 / L = 90 15 nf high-grade st. steel 10...36 IP 65 / IP 67 10 100 9 KI5087 M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 25 · Connector groups 9, 10, 11, 12 M30 / L = 90 8f high-grade st. steel 10...36 IP 65 / IP 67 10 100 8 KI5084 M30 / L = 90 15 nf high-grade st. steel 10...36 IP 65 / IP 67 10 100 9 KI5086 IP 65 40 250 10 KI5023 IP 65 40 250 10 KI5024 Terminals · Output function M30 / L = 125 · DC PNP · Wiring diagram no. 10 15 nf Terminals · Output function M30 / L = 125 PBT 10...55 · DC NPN · Wiring diagram no. 11 15 nf PBT 10...36 You can find wiring diagrams and scale drawings from page 148 139 Capacitive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Ø 34 / L = 81 Cable 2 m · Output function Ø 34 / L = 81 Cable 2 m · Output function Ø 34 / L = 81 Cable 2 m · Output function Ø 34 / L = 81 20 nf Cable 2 m · Output function 120 x 80 x 30 Cable 2 m · Output function 120 x 80 x 30 20 nf f Iload Drawing no. Order no. [Hz] [mA] IP 65 40 250 11 KB5004 IP 65 40 250 11 KB5002 IP 65 40 250 11 KB5001 IP 65 40 250 11 KB5003 [V] PBT 10...36 PBT 10...36 · DC NPN · Wiring diagram no. 7 20 nf PBT 10...36 · DC NPN · Wiring diagram no. 8 20 nf PBT 10...36 · DC PNP · Wiring diagram no. 5 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 20 nf PBT 10...36 IP 65 20 nf PBT 10...36 250 12 KB5062 IP 65 40 250 12 KB5096 IP 65 10 250 13 KD5022 IP 65 10 250 13 KD5024 · DC PNP · Wiring diagram no. 1 60 nf modified PPO 10...36 · DC NPN · Wiring diagram no. 7 60 nf modified PPO 10...36 · DC PNP · Wiring diagram no. 26 · Connector groups 9, 10, 11, 12, 107, 108, 109, 60 nf modified PPO 10...36 IP 65 Product selectors and further information can be found at: www.ifm.com 140 40 · DC PNP · Wiring diagram no. 12 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, M12 connector · Output function 110, 135, 136 105 x 80 x 40 Protection · DC PNP · Wiring diagram no. 6 M12 connector · Output function 135, 136 Ø 34 / L = 93 Ub · DC PNP · Wiring diagram no. 1 M12 connector · Output function 135, 136 Ø 34 / L = 93 Material 10 250 14 KD5039 Capacitive sensors Type Dimensions Sensing range [mm] [mm] Terminals · Output function 105 x 80 x 40 Material Ub Protection f Iload Drawing no. Order no. [Hz] [mA] IP 65 10 250 15 KD5018 Protection f AC / DC Iload AC / DC Drawing no. Order no. [Hz] [mA] IP 67 25 / 50 350 / 100 1 KG0009* IP 67 25 / 50 350 / 100 1 KG0010* IP 65 25 / 50 350 / 100 4 KG0008* IP 65 25 / 40 250 6 KI0016* IP 65 25 / 40 250 6 KI0020* [V] · DC PNP · Wiring diagram no. 27 60 nf modified PPO 10...36 f = flush / nf = non flush Sensors for industrial applications, AC and AC/DC Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M18 / L = 84 Cable 2 m · Output function M18 / L = 84 Cable 2 m · Output function M30 / L = 81 Cable 2 m · Output function M30 / L = 81 [V] 8 nf PBT 8 nf PBT 20...250 · AC/DC · Wiring diagram no. 15 8 nf PBT 20...250 · AC/DC · Wiring diagram no. 13 15 nf PBT 20...250 · AC/DC · Wiring diagram no. 14 15 nf 15 nf Terminals · Output function M30 / L = 125 20...250 · AC/DC · Wiring diagram no. 14 PBT connector (DIN EN 175301-803) · Output function M30 / L = 92 Ub · AC/DC · Wiring diagram no. 13 Terminals · Output function M18 / L = 110 Material 20...250 · AC/DC · Wiring diagram no. 16 · Connector group 30 PBT 20...250 IP 65 25 / 40 250 7 KI0040* IP 65 25 / 40 250 10 KI0024* · AC/DC · Wiring diagram no. 17 15 nf PBT 20...250 You can find wiring diagrams and scale drawings from page 148 141 Capacitive sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material Ub Protection f AC / DC Iload AC / DC Drawing no. Order no. [Hz] [mA] IP 65 25 / 40 250 11 KB0025* IP 65 25 / 40 250 11 KB0029* IP 65 10 250 13 KD0012* IP 65 10 250 13 KD0013* IP 65 10 250 15 KD0009* [V] · AC/DC · Wiring diagram no. 13 Ø 34 / L = 81 20 nf Cable 2 m · Output function PBT 20...250 · AC/DC · Wiring diagram no. 14 Ø 34 / L = 81 20 nf Cable 2 m · Output function PBT 20...250 · AC/DC · Wiring diagram no. 13 120 x 80 x 30 60 nf Cable 2 m · Output function modified PPO 20...250 · AC/DC · Wiring diagram no. 14 120 x 80 x 30 60 nf Terminals · Output function modified PPO 20...250 · AC/DC · Wiring diagram no. 28 105 x 80 x 40 60 nf modified PPO 20...250 f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Sensors for the detection of conductive media through a wall Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M18 / L = 77 Ub Protection f Iload [Hz] [mA] IP 65 / IP 67 10 IP 65 / IP 67 10 [V] 8 nf PP 10...36 Order no. 200 16 KG5067 200 16 KG5069 · DC PNP · Wiring diagram no. 18 8 nf PP 10...36 Product selectors and further information can be found at: www.ifm.com 142 Drawing no. · DC PNP/NPN · Wiring diagram no. 29 Cable 2 m · Output function M18 / L = 77 Material Capacitive sensors Type Dimensions Sensing range [mm] [mm] Material 8 nf PBT 12 nf PBT 12 nf PBT 12 nf PBT Cable with connector 0.04 m · Output function groups 4, 5 20 x 14 x 48 [mA] Order no. 10...36 IP 65 / IP 67 10 200 17 KG5071 10...36 IP 65 / IP 67 10 100 18 KQ6001 12 nf 12 nf 10...36 IP 65 / IP 67 10 100 18 KQ6002 · 1x open collector with automatic load detection (DC PNP or 10...36 IP 65 / IP 67 10 100 18 KQ6003 · 1x open collector DC PNP · Wiring diagram no. 2 · Connector PBT Cable with connector 0.1 m · Output function groups 9, 10, 11 20 x 14 x 48 [Hz] Drawing no. · 1x open collector DC PNP · Wiring diagram no. 18 Cable with connector 0.04 m · Output function DC NPN) · Wiring diagram no. 25 · Connector groups 4, 5 20 x 14 x 48 Iload · 1x open collector with automatic load detection (DC PNP or DC NPN) · Cable 2 m · Output function 20 x 14 x 48 f · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, Cable 2 m · Output function Wiring diagram no. 29 20 x 14 x 48 Protection [V] M12 connector · Output function 135, 136 M18 / L = 87 Ub 10...36 IP 65 / IP 67 10 100 18 KQ6004 · 1x open collector DC PNP · Wiring diagram no. 2 · Connector PBT 10...36 IP 65 / IP 67 10 100 18 KQ6005 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for the detection of granulates for the plastics industry, DC Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M18 / L = 87 Ub Protection [V] · DC PNP/NPN · Wiring diagram no. 25 · Connector groups 9, 10, 11, 12 12 nf M12 connector · Output function M18 / L = 87 Material PBT 10...36 IP 65 / IP 67 10 200 17 KG5065 17 KG5066 · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12 12 nf PBT 10...36 IP 65 / IP 67 10 200 You can find wiring diagrams and scale drawings from page 148 143 Capacitive sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · DC PNP · Wiring diagram no. 30 · Connector groups 9, 11, 107, 108, 135 M30 / L = 116 nf M12 connector · Output function 109, 110, 135, 136 PPS 10...30 IP 67 10 200 19 KN5121 · DC PNP/NPN · Wiring diagram no. 25 · Connector groups 9, 10, 11, 12, 107, 108, M30 / L = 90 20 nf M12 connector · Output function 135, 136 PBT 10...36 IP 65 / IP 67 10 200 20 KI5082 · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, M30 / L = 90 20 nf PBT 10...36 IP 65 / IP 67 10 200 20 KI5083 f Iload Drawing no. Order no. [Hz] [mA] f = flush / nf = non flush Sensors for the detection of granulates for the plastics industry, AC / DC Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] 1/2“ UNF-Connector · Output function · AC/DC · Wiring diagram no. 19 · Connector group 26 M18 / L = 87 12 nf PBT 20...250 IP 65 / IP 67 10 150 21 KG0016* M30 20 nf PBT 20...250 IP 65 / IP 67 10 150 22 KI0054* f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Sensors with ATEX approval Type Dimensions Sensing range [mm] [mm] Material Unom. at 1 KΩ Ub Internal capacit. Internal inductance f [V] [V] [nF] [μH] [Hz] Drawing no. Order no. 6 KI5030 Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 20 M30 / L = 81 15 nf PBT 8.2 DC 7.5...15 375 Product selectors and further information can be found at: www.ifm.com 144 1 40 Capacitive sensors Type Dimensions Sensing range [mm] [mm] Material Unom. at 1 KΩ Ub Internal capacit. Internal inductance f [V] [V] [nF] [μH] [Hz] Drawing no. Order no. Cable 6 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 20 M30 / L = 81 15 nf Terminals · Output function M30 / L = 151 8.2 DC 7.5...15 375.64 3 40 6 KI5031 – – 10 23 KI5065 – – 25 / 50 23 KI0042* 40 24 KX5001 40 24 KX5002 · DC PNP · Wiring diagram no. 10 15 nf Terminals · Output function M30 / L = 151 PBT PBT 10...30 DC – · AC/DC · Wiring diagram no. 17 15 nf 20...250 AC/DC PBT – Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 21 M34 / L = 92 15 nf brass 8.2 DC 7.5...15 375 1 Cable 6 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 21 M34 / L = 92 15 nf brass 8.2 DC 7.5...15 375.64 3 f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting), Place the fuse outside the hazardous area. Recommendation: check the unit for reliable function after a short circuit. Switching amplifiers with ATEX approval Type Ub Power / current consumption f Ta Output Protection Drawing no. Order no. [V] [VA] / [mA] [Hz] [°C] 115 1.0 / 10 -20...60 relay (1 changeover contact) IP 20 25 N0030A 230 1.0 / 10 -20...60 relay (1 changeover contact) IP 20 25 N0031A 115 1.3 / 10 -20...60 relay (1 changeover contact per channel) IP 20 25 N0032A 230 1.3 / 10 -20...60 relay (1 changeover contact per channel) IP 20 25 N0033A You can find wiring diagrams and scale drawings from page 148 145 Capacitive sensors Type Ub Power / current consumption f Ta Output Protection Drawing no. Order no. [V] [VA] / [mA] [Hz] [°C] 24 / < 23 10 -20...60 relay (1 changeover contact) IP 20 25 N0530A 24 / < 50 5000 -20...60 2 transistor outputs PNP (100 mA, short-circuit protection) IP 20 25 N0531A 24 / < 50 5000 -20...60 2 outputs (optocoupler, bipolar, 100 mA, short-circuit protection) IP 20 25 N0532A 24 / < 50 10 -20...60 relay (1 changeover contact per channel) IP 20 25 N0533A 24 / < 50 5000 -20...60 2 transistor outputs PNP (100 mA, short-circuit protection) IP 20 25 N0534A Accessories mounting adapters Type Description Mounting adapter · M18 x 1 - G ¾ · Housing materials: POM E43900 Mounting adapter · M18 x 1 - G 1 · Housing materials: POM E43904 Mounting adapter · M30 x 1.5 - G 1¼ · Housing materials: PVDF / EPDM E11036 Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: PVDF / EPDM E11034 Mounting adapter · Ø 34 mm - G 1½ · Housing materials: POM E11027 Locknut · G ¾ · for mounting adapter · Housing materials: POM E43902 Locknut · G 1¼ · for mounting adapter · Housing materials: PVDF E11030 Locknut · G 1½ · for mounting adapter · Housing materials: PVDF E11032 Product selectors and further information can be found at: www.ifm.com 146 Order no. Capacitive sensors Type Description Protective cover · G 1¼ · for mounting adapter · Housing materials: PES black transparent Order no. E11078 Accessories mounting components Type Description Order no. Mounting clamp · Ø 34 mm · Housing materials: PBT E10017 Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076 Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077 Mounting clamp · Ø 34 mm · Housing materials: PA E10193 Angle bracket · for type M12 · Housing materials: stainless steel E10735 Angle bracket · for type M18 · Housing materials: stainless steel E10736 Angle bracket · for type M30 · Housing materials: stainless steel E10737 Mounting adapter for free-standing mounting · for type KQ5, KQ6 · Housing materials: adapter: PBT / inserts: brass / screw: steel galvanised · Pack quantity: 1 E12153 Mounting adapter · Pipe and tube installation KQ5 / KQ6 with cable ties · Fixing of the types KQ5 and KQ6 to pipes and tubes · Housing materials: Mounting adapter: PA 12 black E12163 Fixing strap · Length: 760 mm · for capacitive level sensors · for type KNQ, KQ5, KQ6 · Housing materials: PA · Pack quantity: 5 E10880 Mounting set · M30 x 1.5 / G ¼...G 1 · for capacitive sensors on rising pipes G ¼" - 1" · Housing materials: POM E11037 You can find wiring diagrams and scale drawings from page 148 147 Capacitive sensors Accessories mounting sets Type Description Order no. Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20718 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20719 Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20866 Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20867 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20869 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20870 Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20873 Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20874 Mounting set · Ø 30.2 mm · Clamp mounting · aluminium profile · for type OI, II, KI · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20875 Angle bracket · Clamp mounting · for type IW, OW, KQ5 · Housing materials: stainless steel 316Ti / 1.4571 E20811 Wiring diagrams Core colours 1 2 BN brown BU blue BN BK black BK WH white BU GN/YE green/yellow L+ 1 L+ L 3 1 L+ 4 4 Product selectors and further information can be found at: www.ifm.com 148 3 L 3 L Capacitive sensors Wiring diagrams 4 9 1 14 1 L+ /4 2 L+ 19 BN L1 L+ 2 L1 L+ BU N L 3 N L 3 3 2 L 5 L 10 15 /3 1 1 L+ 20 /3 L1 L+ BN /4 N L BU 1 L+ + 4 /4 2 3 L 6 2 L 11 16 /3 1 BN L+ 21 1 L+ BN L1 L+ + BU BK /4 2 BU L 7 12 BN 2 L 17 /3 L1 L+ /4 N L 1 1 L+ L+ 2 BK BU 2 3 L 8 L 13 BN 18 BN L+ BU L BN L1 L+ BK BU GN/YE N L BU N L 22 L+ BK L 24 WH L+ BK BN L+ L+ BK BK L WH BU L 23 BU L+ BK L BN L 25 /3 /4 2 1 L+ L+ 1 L+ 4 /4 2 /3 1 L L 3 1 L+ 4 L 3 L 149 Capacitive sensors Wiring diagrams 26 28 1 AC; DC NPN 1 1 L+ L+ 3 L 5 4 4 2 3 L 2 N L+ 4 L1 L 5 1 2 L+ 3 4 1 L+ 2 L+ 3 4 L 5 1 L1 L 1 DC PNP 2 27 N L+ 3 4 DC PNP 1 AC; DC NPN 2 5 L L+ 2 3 3 4 4 L 5 5 29 L BN BN L+ L+ BK BK BU BU L L 30 1 3 L+ 4 2 2 3 1 L Scale drawings / drawing no. – CAD download: www.ifm.com 3 1 84 61,2 41,6 34,6 pot. LED 58 24 M12 x1 5 4 M12 x1 pot. M18 x1 LED 2 1 2 1: LED 4 x 90°, 2: with pot. 4 M12 x1 M12 x1 59,8 40,2 38,2 110 81 67,2 LED 1 50 M18 x1 2 20 1 30 1: LED 4 x 90°, 2: with pot. 17 24 80 1: with pot. Product selectors and further information can be found at: www.ifm.com 150 L+ 4 4 L Capacitive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 10 5 125 93,8 84 64 54 25 M12 x1 37 4 24 M30 x1,5 1 M18 x1 2 95 pot. LED 67,2 58 5 36 1: with pot., 2: LED 88 6 11 18 81 LED 59 pot. 18 81 9 34 M30 x1,5 9 36 pot. LED 60 5 7 12 92 82 93 66 59 81 pot. 34 M12x1 M30 x1,5 60 5 36 pot. LED LED 13 8 120 pot. 9,5 6 90 77 30 15 45 60 40 60 80 M12 x 1 M30 x1,5 21 LED LED (4 x 90°) 1 36 5 1: Programming buttons 100 10 9 14 90 77 120 105 60 15 9,3 40 5,5 12 5 65 80 36 M12x1 1 18 27 M30 x1,5 M12 x 1 LED (4 x 90°) 40 pot. LED 1: Programming buttons 65 7,5 16 151 Capacitive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 20 15 105 9,3 90 40 5,5 40 80 12 M30 x1,5 65 80 M12 x 1 18 27 61 pot. LED 7,5 65 1 2 5 36 1: LED ring, 2: Programming buttons 16 21 16 87 77 88 77 56 1 2 1 6 24 M18 x1 M18 x1 1/2“ UNF 56 1: LED ring, 2: Programming buttons 2 4 24 22 17 90 80 61 M12 x1 M18 x1 56 M30 1/2" UNF 87 77 1 1 2 2 5 36 4 24 1: LED ring, 2: Programming buttons 1: LED ring, 2: Programming buttons 23 18 151 95 64 54 1 37 3,2 2 24 63 1 POTI 26 5,5 3 20 13,4 LED M30 x1,5 2 14 125 48 43,7 33 1: Programming buttons, 2: sensing face 36 5 19 88 24 20 M30 x1,5 116 101 68 1 41 M12 x1 M30 x1,5 5 LED 1: Programming button Product selectors and further information can be found at: www.ifm.com 152 pot. 20 5 120 109 100 50 36 82 40 M34 x1,5 36 10 5 LED Capacitive sensors Scale drawings / drawing no. – CAD download: www.ifm.com 25 20 35,5 120 112 LED 1 1: Combicon plug with screw terminals (optional) 153 Touch sensors Non-contact switching, no pressure necessary. Free of wear and maintenance. Optical feedback by LEDs in case of switching. Oil-resistant, protection rating IP 69K, impact and scratch resistant. Easy wiring thanks to tried-and-tested 3-wire technology. Capacitive touch sensors Capacitive touch sensors are well known from trains where they are used for opening doors. They are also frequently used in industry, e.g. as start / stop buttons on machines. Moreover, capacitive touch sensors can be used as a button on mobile machinery. They are also used on pedestrian crossing lights. The advantage: designs for handicapped people with Braille are possible. Touch sensitive switching The dynamic-capacitive measuring principle detects an approaching human hand. The electronics suppresses interference such as water, layers of ice and static foreign bodies. The touch sensors also switch through glass, thus offering further installation flexibility, e.g. for protection against vandalism. As compared to mechanical switches the sensors operate without wear. Since the touch sensors react to contact, no pressure is required for activation. This means considerably increased ease of use. LEDs as optical feedback signal that the sensor has been activated. 154 Touch sensors System overview Page Dynamic capacitive touch sensors 156 Scale drawings / drawing no. – CAD download: www.ifm.com 156 155 Touch sensors Dynamic capacitive touch sensors Type Ub Iload Current consumption Ambient temperature [V] [mA] [mA] [°C] 30 Cable 2 m · Output function Protection Drawing no. Order no. -40...85 IP 69K 1 KT5001 -40...85 IP 69K 2 KT5002 · DC PNP 24 500 Cable with connector 0.3 m · Output function 24 · DC PNP 500 30 Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 100 60,2 100 60,2 38 10 ° 60 12 0° 4,3 Product selectors and further information can be found at: www.ifm.com 156 10 Touch sensors 157 Magnetic sensors Detection also through non-magnetisable metals. Small designs with very long sensing ranges up to 100 mm. Cylinder and rectangular designs for demanding applications. Wide temperature range for universal use. Flush or non-flush installation in non-magnetisable metals. Magnetic sensors Magnetic sensors are used for the detection of positions without contact or wear and tear in control technology. They are used where inductive sensors reach their limits. The advantage: Compared to inductive sensors magnetic sensors have a considerably higher sensing range and smaller housings. Since magnetic fields penetrate all non-magnetisable materials, the sensors can detect magnets through walls made of non-ferrous metal, stainless steel, aluminium, plastic or wood. In gate systems, for example, the magnet sensor only detects the magnet which is to be detected. Any possible influences by aluminium in the environment do not impact the sensor. In the food industry the magnetic sensor is often used in connection with pigs (cleaning devices which pass through the inside of pipes). By means of magnetic sensors their exact position can be detected from the outside through the wall of the stainless steel pipe. Operating principle Magnetic sensors from ifm electronic use state-of-the-art GMR (Giant Magneto Resistive Effect) technology. The measuring cell consists of resistors with several extremely fine, ferromagnetic and non-magnetic layers. Whereas in a conventional Wheatstone bridge circuit two screened and two unscreened GMR resistors are combined, a large signal proportional to the magnetic field is produced if a magnetic field is present. As from a defined threshold value an output signal is switched via a comparator. Installation Magnetic sensors can be mounted flush with all materials (even metals) without reduction in the sensing range. Depending on the orientation of the magnetic field the sensor can be damped from the front or from the side. 158 The sensor switches as soon as the magnet has reached the switch-on point. The direction of movement of the magnet is not important. Magnetic sensors System overview Full metal sensors for industrial applications Sensors for industrial applications Page 160 160 - 162 Full metal sensors for hygienic and wet areas 162 Sensors for hygienic and wet areas 162 Accessories mounting components 163 Accessories mounting sets 163 Accessories damping magnets 164 Wiring diagrams 164 Scale drawings / drawing no. – CAD download: www.ifm.com 165 159 Magnetic sensors Full metal sensors for industrial applications Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M12 / L = 60 Iload [Hz] [mA] Drawing no. Order no. 10...30 IP 65 / IP 67 5000 200 1 MFS211 high-grade st. steel 10...30 IP 65 / IP 67 5000 200 1 MFS209 1 MFS210 · DC PNP · Wiring diagram no. 3 · Connector groups 107, 108, 135 60 high-grade st. steel 10...30 IP 65 / IP 67 5000 200 · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 70 high-grade st. steel 10...30 IP 65 / IP 67 5000 200 2 MGS204 2 MGS205 · DC NPN · Wiring diagram no. 2 · Connector groups 107, 108, 135 70 M12 connector · Output function M18 / L = 60 high-grade st. steel 60 M12 connector · Output function M18 / L = 60 f · DC NPN · Wiring diagram no. 2 · Connector groups 107, 108, 109, 110, 135, 136 M12 connector · Output function M18 / L = 60 Protection [V] 60 M12 connector · Output function M12 / L = 60 Ub · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M12 connector · Output function M12 / L = 60 Material high-grade st. steel 10...30 IP 65 / IP 67 5000 200 · DC PNP · Wiring diagram no. 3 · Connector groups 107, 108, 135 70 high-grade st. steel 10...30 IP 65 / IP 67 5000 200 2 MGS206 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] Sensors for industrial applications Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function Material [V] · DC PNP · Wiring diagram no. 4 M8 / L = 50 60 V4A (316S12) 10...30 IP 67 5000 200 3 ME5011 M12 / L = 50 60 high-grade st. steel 10...30 IP 67 5000 200 4 MFS201 Product selectors and further information can be found at: www.ifm.com 160 Magnetic sensors Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function M8 / L = 40 Cable 2 m · Output function M12 / L = 50 60 Protection f Iload [Hz] [mA] IP 67 5000 IP 67 5000 [V] Drawing no. Order no. V4A (316S12) 10...30 200 5 ME5015 200 4 MFS202 200 6 ME5010 · DC NPN · Wiring diagram no. 5 60 high-grade st. steel 10...30 · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 60 M12 connector · Output function 135, 136 M12 / L = 60 Ub · DC NPN · Wiring diagram no. 5 M8 connector · Output function M8 / L = 60 Material V4A (316S12) 10...30 IP 67 5000 · DC NPN · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 60 M12 connector · Output function 135, 136 high-grade st. steel 10...30 IP 67 5000 200 1 MFS203 · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, M12 / L = 60 60 stainless steel 10...30 IP 67 – 200 1 MF5004 M12 / L = 60 60 high-grade st. steel 10...30 IP 67 5000 200 1 MFS200 M18 / L = 60 70 stainless steel 10...30 IP 67 5000 200 2 MGS200 IP 67 5000 200 7 MGS201 IP 67 5000 200 7 MGS202 IP 67 5000 200 8 MS5011 Cable 2 m · Output function M18 / L = 50 Cable 2 m · Output function M18 / L = 50 Cable 2 m · Output function 28 x 10 x 16 · DC PNP · Wiring diagram no. 4 70 stainless steel 10...30 · DC PNP · Wiring diagram no. 6 70 stainless steel 10...30 · DC PNP · Wiring diagram no. 4 60 PBT 10...30 You can find wiring diagrams and scale drawings from page 164 161 Magnetic sensors Type Dimensions Sensing range [mm] [mm] M8 connector · Output function 28 x 10 x 16 Material Protection [V] f Iload [Hz] [mA] Drawing no. Order no. 9 MS5010 · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 60 PBT Cable with connector 0.15 m · Output function 40 x 12 x 26 Ub 10...30 IP 67 5000 200 · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 60 PBT 10...30 IP 67 – 200 10 MN5200 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] Full metal sensors for hygienic and wet areas Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material [V] · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M12 / L = 60 60 high-grade st. steel 10...30 IP 65 / IP 68 / IP 69K 5000 100 1 MFT202 Ø 12 / L = 60 60 high-grade st. steel 10...30 IP 65 / IP 68 / IP 69K 5000 100 11 MFT204 M18 / L = 60 70 high-grade st. steel 10...30 IP 65 / IP 68 / IP 69K 5000 100 2 MGT203 Ub Protection f Iload Drawing no. Order no. [Hz] [mA] Sensors for hygienic and wet areas Type Dimensions Sensing range [mm] [mm] M12 connector · Output function M12 / L = 60 60 high-grade st. steel 10...30 IP 68 / IP 69K 70 high-grade st. steel 10...30 IP 68 / IP 69K 200 1 MFT200 5000 200 2 MGT200 200 2 MGT201 · DC PNP · Wiring diagram no. 1 · Connector groups 107, 109 100 high-grade st. steel 10...30 IP 68 / IP 69K Product selectors and further information can be found at: www.ifm.com 162 5000 · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, M12 connector · Output function M18 / L = 60 [V] · DC PNP · Wiring diagram no. 1 · Connector groups 107, 108, 109, 110, 135, 136 M12 connector · Output function 135, 136 M18 / L = 60 Material – Magnetic sensors Accessories mounting components Type Description Order no. Angle bracket · for type M8 · Housing materials: stainless steel E10734 Angle bracket · for type M12 · Housing materials: stainless steel E10735 Angle bracket · for type M18 · Housing materials: stainless steel E10736 Mounting clamp · Ø 8 mm · Housing materials: aluminium black anodised E10221 Mounting clamp · Ø 12 mm · with end stop · for type M12 · Housing materials: PC E11047 Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048 Accessories mounting sets Type Description Order no. Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20718 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20719 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20869 Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20870 Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20866 Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20867 You can find wiring diagrams and scale drawings from page 164 163 Magnetic sensors Accessories damping magnets Type Description Order no. Damping magnet · M 1.0 · Housing materials: Samarium cobalt E10749 Damping magnet · M 2.0 · Housing materials: AlNiCo E10750 Damping magnet · M 3.0 · Housing materials: Barium ferrite E10751 Damping magnet · M 4.0 · Housing materials: Barium ferrite E10752 Damping magnet · M 4.1 · Housing materials: Barium ferrite / stainless steel E11803 Damping magnet · M 5.0 · Housing materials: Barium ferrite E10753 Damping magnet · M 5.1 · Housing materials: Barium ferrite with plastic coating / steel E10754 Wiring diagrams Core colours 3 5 BK black BN brown 1 BU blue 2 3 1 1 L+ 4 3 BU L 4 L BU 2 L+ BN L+ BK L BU L+ 4 L Product selectors and further information can be found at: www.ifm.com 164 L 6 BN 3 L+ BK BK 1 BN L+ L Magnetic sensors Scale drawings / drawing no. – CAD download: www.ifm.com 8 1 60 49 40 LED 16 5,1 5,6 3,5 2,8 3,1 M12 x1 M12 x1 LED 10,2 27,8 22,2 4 LED 4 x 90° 3,1 17 2 2,75 10,4 60 49 47 40 10,2 4 LED 4 x 90° 16 10,4 3,1 2,75 2,8 M12 x1 M18 x1 9 3 3,1 27,8 36,8 22,2 3,5 5,6 24 M8x1 50 40 LED M8x1 M8x1 4 LED LED 13 10 4 LED 50 26 29 12 5 10 3,2 20 4 3,2 32 40 17 5 18 40 1 4 1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact with counterpart. M8x1 LED 16 LED 13 4 M12 x1 LED 4 13 11 6 M8x1 M8x1 M12 x1 60 52 45 12 60 49 40 LED 4 x 90° 4 LED 4 x 90° 13 2 LED 50 43 40 M18 x1 7 4 24 165 Cylinder sensors Self-clamping fixture for easy adjustment and quick mounting. Convenient: can be easily inserted into the slot from the top. Suitable for almost all C and T slots. Unit versions available with connection cable and M8 / M12 cable plug. Wide selection of adapter accessories. Cylinder sensors Cylinder sensors are used for position detection of pistons in pneumatic cylinders. They are directly mounted onto the cylinder. The ring magnet attached to the piston is sensed through the housing wall of non-magnetisable material (e.g. aluminium, brass or stainless steel). ifm electronic offers a standard solution for different cylinder types and manufacturers. Operating principle ifm electronic‘s cylinder sensors use state-of-the-art GMR and AMR technology: A GMR element is made up of extremely thin magnetic layers, each separated by a nonmagnetic layer. Without external field they align in an antiparallel manner which results in a defined electrical resistance. If these layers are exposed to a magnetic field, the magnetic layers align in a parallel manner. This results in a large change in resistance that is converted into a switching signal by the internal electronics. An AMR element consists of thin ferromagnetic stripes. Electrical resistance is highest without external magnetic fields. The effect of a magnetic field reduces resistance. This change is converted into a switching signal by the internal electronics. Advantage: This method enables exact measurement of even very small changes of the magnetic field where space is extremely limited. This results in a smaller hysteresis and a short travel distance. So, the sensors can be used wherever exact positioning is required (e.g. short-stroke cylinder). Response sensitivity The response sensitivity applies equally to either magnetic polarity and without external field influence. The magnetic flux density in most pneumatic cylinders is between 5 and 25 millitesla (mT). ifm electronic’s cylinder sensors are factory set so that they detect these magnetic fields safely. Travel distance The travel distance describes the section which is covered by the magnet in the sensing zone. It depends on the strength of the magnet. The short response times of the sensors allow very high travel speeds. 166 Position sensing: Cylinder sensors monitor the position of the piston in a pneumatic cylinder. Cylinder sensors System overview Page T-slot sensors for industrial applications 168 - 169 T-slot reed sensors for industrial applications, 2-wire 170 T-slot reed sensors for industrial applications, 3-wire 170 - 171 T-slot reed sensors with ATEX approval 1G/1D 171 T-slot reed sensors with ATEX approval 3D/3G 171 T-slot sensors for hygienic and wet ares 172 T-slot sensors for short-stroke cylinders 172 - 173 T-slot sensors for short-stroke cylinders for hygienic and wet areas 173 T-slot sensors with ATEX approval 1G/1D 173 T-slot sensors with ATEX approval 3D/3G 174 T-slot sensors with ATEX approval 3D 174 Non flush C-slot sensors for industrial applications 174 - 175 Flush C-slot sensors for industrial applications 175 - 176 C-slot sensors for short-stroke cylinders Fixing straps for clean line cylinders Clips Adapters for tie rod and integrated profile Adapters for trapezoidal slot cylinders 176 176 - 177 178 178 - 179 179 Various adapters and memorisation blocks 179 - 180 Wiring diagrams 180 - 181 Scale drawings / drawing no. – CAD download: www.ifm.com 181 - 184 167 Cylinder sensors T-slot sensors for industrial applications Type Dimensions Material [mm] M8 connector · Output function 27.5 x 18 x 15.5 M8 connector · Output function 27.5 x 18 x 15.5 Cable 2 m · Output function Ub f [V] [Hz] Protection Ta [mA] [°C] Drawing no. Order no. 1 MK5900 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 PA (polyamide) 10...30 > 6000 IP 65 / IP 67 100 -25...85 · 3-wire · DC NPN · Wiring diagram no. 2 · Connector groups 1, 2, 3, 68 PA (polyamide) 10...30 > 6000 IP 65 / IP 67 100 -25...85 1 MK5902 · 3-wire · DC PNP · Wiring diagram no. 4 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 100 -25...85 2 MK5100 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 200 -25...85 2 MK5115 IP 65 / IP 67 100 -25...85 2 MK5114 IP 65 / IP 67 100 -25...85 2 MK5103 IP 65 / IP 67 200 -25...85 2 MK5117 IP 65 / IP 67 100 -25...85 2 MK5124 Cable 2 m · Output function 25 x 5 x 6.5 Cable 2 m · Output function 25 x 5 x 6.5 Cable 6 m · Output function 25 x 5 x 6.5 Cable 10 m · Output function 25 x 5 x 6.5 · 3-wire · DC NPN · Wiring diagram no. 5 PA (polyamide) 25 x 5 x 6.5 10...30 > 10000 · 2-wire · DC PNP/NPN · Wiring diagram no. 6 PA (polyamide) 10...30 4000 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) 10...30 > 10000 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) Cable with connector 0.3 m · Output function PA (polyamide) 10...30 > 10000 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 10000 IP 65 / IP 67 Product selectors and further information can be found at: www.ifm.com 168 Iload 100 -25...85 3 MK5101 Cylinder sensors Type Dimensions Material [mm] Cable with connector 0.3 m · Output function Ub f [V] [Hz] Protection Iload Ta [mA] [°C] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 200 -25...85 3 MK5106 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 100 -25...85 4 MK5102 Cable with connector 0.3 m · Output function 25 x 5 x 6.5 PA (polyamide) Cable with connector 0.3 m · Output function · 3-wire · DC NPN · Wiring diagram no. 2 · Connector groups 1, 3, 68 10...30 > 10000 IP 65 / IP 67 100 -25...85 3 MK5112 · 2-wire · DC PNP/NPN · Wiring diagram no. 7 · Connector groups 1, 3 25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP 65 / IP 67 100 -25...85 3 MK5104 25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP 65 / IP 67 100 -25...85 4 MK5105 Cable with connector 1 m · Output function 25 x 5 x 6.5 PA (polyamide) Cable with connector 0.3 m · Output function 108, 109, 110, 135, 136 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 10000 IP 65 / IP 67 100 -25...85 4 MK5122 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 100 -25...85 5 MK5107 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 200 -25...85 5 MK5108 Cable with connector 0.3 m · Output function 108, 135 25 x 5 x 6.5 PA (polyamide) · 2-wire · DC PNP/NPN · Wiring diagram no. 7 · Connector groups 9, 11, 107, 10...30 4000 IP 65 / IP 67 100 -25...85 5 MK5109 * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 0,175 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. You can find wiring diagrams and scale drawings from page 180 169 Cylinder sensors T-slot reed sensors for industrial applications, 2-wire Type Dimensions Material [mm] M8 connector · Output function 27.5 x 18 x 15.5 Cable 2 m · Output function 30.5 x 5 x 6.5 Cable 6 m · Output function 30.5 x 5 x 6.5 Ub f [V] [Hz] Protection Iload Ta Order no. [°C] Drawing no. [mA] 100 -25...70 1 MR0901* 100 -25...70 6 MR0100* 100 -25...70 6 MR0117* · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 8 PA (polyamide) 5...50 1000 IP 65 / IP 67 · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 9 PA (polyamide) 5...120 1000 IP 67 · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 9 PA (polyamide) Cable with connector 0.3 m · Output function 5...120 1000 IP 67 · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 8 · Connector groups 1, 3 30.5 x 5 x 6.5 PA (polyamide) 5...60 1000 IP 67 100 -25...70 7 MR0101* 30.5 x 5 x 6.5 PA (polyamide) 5...60 1000 IP 67 100 -25...70 8 MR0102* Cable with connector 0.3 m · Output function 107, 108, 135 30.5 x 5 x 6.5 PA (polyamide) · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 8 · Connector groups 9, 11, 5...60 1000 IP 67 100 -25...70 9 MR0107* * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 0,175 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. T-slot reed sensors for industrial applications, 3-wire Type Dimensions Material [mm] M8 connector · Output function 27.5 x 18 x 15.5 f [V] [Hz] Protection PA (polyamide) PA (polyamide) 5...50 1000 IP 65 / IP 67 Ta Order no. [°C] Drawing no. [mA] 350 / 500 -25...70 1 MR0902* · 3-wire · AC/DC PNP · Wiring diagram no. 3 · Connector groups 1, 2, 3, 68 5...50 1000 IP 65 / IP 67 Product selectors and further information can be found at: www.ifm.com 170 Iload · 3-wire · AC/DC PNP · Wiring diagram no. 3 Cable with connector 0.3 m · Output function 30.5 x 5 x 6.5 Ub 350 / 500 -25...70 7 MR0119* Cylinder sensors Type Dimensions Material [mm] Cable with connector 0.3 m · Output function 30.5 x 5 x 6.5 Cable 2 m · Output function 30.5 x 5 x 6.5 Cable 6 m · Output function 30.5 x 5 x 6.5 PA (polyamide) f [V] [Hz] Protection Iload Ta [mA] [°C] Drawing no. Order no. · 3-wire · AC/DC PNP · Wiring diagram no. 3 · Connector groups 1, 2, 3, 68 5...50 1000 IP 65 / IP 67 350 / 500 -25...70 8 MR0120* 350 / 500 -25...70 6 MR0122* 350 / 500 -25...70 6 MR0123* · 3-wire · AC/DC PNP · Wiring diagram no. 10 PA (polyamide) 5...50 1000 IP 65 / IP 67 · 3-wire · AC/DC PNP · Wiring diagram no. 10 PA (polyamide) Cable with connector 0.3 m · Output function 107, 108, 109, 110, 135, 136 30.5 x 5 x 6.5 Ub PA (polyamide) 5...50 1000 IP 65 / IP 67 · 3-wire · AC/DC PNP · Wiring diagram no. 3 · Connector groups 9, 10, 11, 12, 5...50 1000 IP 65 / IP 67 350 / 500 -25...70 9 MR0121* * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 0.75 A (fast blow, DC operation), ≤ 0.6 A (fast blow, AC operation). Recommendation: check the unit for reliable function after a short circuit. T-slot reed sensors with ATEX approval 1G/1D Type Dimensions Material [mm] Ub f [V] [Hz] Protection Iload Ta [mA] [°C] Drawing no. Order no. Cable 6 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 6 30.5 x 5 x 6.5 PA (polyamide) – – IP 65 / IP 67 – -25...70 6 MR500A Ub f Protection Iload Ta Order no. [V] [Hz] [mA] [°C] Drawing no. 100 -20...60 6 MR501A* T-slot reed sensors with ATEX approval 3D/3G Type Dimensions Material [mm] Cable 6 m · Output function 30.5 x 5 x 6.5 · 2-wire · DC PNP/NPN · Wiring diagram no. 11 PA (polyamide) 5...30 – IP 65 / IP 67 * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 0,175 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. You can find wiring diagrams and scale drawings from page 180 171 Cylinder sensors T-slot sensors for hygienic and wet ares Type Dimensions Material [mm] Cable 2 m · Output function 25 x 5 x 6.5 Cable 6 m · Output function 25 x 5 x 6.5 PA (polyamide) [V] [Hz] Protection Iload Ta Order no. [°C] Drawing no. [mA] 10...30 > 10000 IP 65 / IP 67 / IP 69K 100 -25...85 2 MK5110 IP 65 / IP 67 / IP 69K 100 -25...85 2 MK5128 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) 10...30 > 10000 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, PA (polyamide) Cable with connector 0.3 m · Output function 108, 135 25 x 5 x 6.5 f · 3-wire · DC PNP · Wiring diagram no. 4 Cable with connector 0.3 m · Output function 107, 108, 109, 110, 135, 136 25 x 5 x 6.5 Ub 10...30 > 10000 IP 65 / IP 67 / IP 69K 100 -25...85 10 MK5111 · 3-wire · DC NPN · Wiring diagram no. 2 · Connector groups 9, 11, 107, PA (polyamide) 10...30 > 6000 IP 65 / IP 67 / IP 69K 100 -25...85 11 MK5186 Ub f Protection Iload Ta Order no. [V] [Hz] [mA] [°C] Drawing no. IP 65 / IP 67 100 -25...85 12 MK5140 IP 65 / IP 67 100 -25...85 12 MK5156 IP 65 / IP 67 100 -25...85 12 MK5161 T-slot sensors for short-stroke cylinders Type Dimensions Material [mm] Cable 2 m · Output function 25 x 5 x 6.5 Cable 2 m · Output function 25 x 5 x 6.5 Cable 10 m · Output function 25 x 5 x 6.5 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) > 6000 · 3-wire · DC PNP · Wiring diagram no. 12 PA (polyamide) 10...30 > 6000 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) Cable with connector 0.3 m · Output function 25 x 5 x 6.5 10...30 PA (polyamide) 10...30 > 6000 · 3-wire · DC NPN · Wiring diagram no. 2 · Connector groups 1, 3, 68 10...30 > 6000 IP 65 / IP 67 Product selectors and further information can be found at: www.ifm.com 172 100 -25...85 13 MK5137 Cylinder sensors Type Dimensions Material [mm] Cable with connector 0.3 m · Output function 25 x 5 x 6.5 PA (polyamide) Cable with connector 0.3 m · Output function 25 x 5 x 6.5 PA (polyamide) Cable with connector 0.3 m · Output function 25 x 5 x 6.5 PA (polyamide) Cable with connector 0.3 m · Output function 108, 109, 110, 135, 136 25 x 5 x 6.5 PA (polyamide) Ub f [V] [Hz] Protection Iload Ta [mA] [°C] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 6000 IP 65 / IP 67 100 -25...85 13 MK5138 · 3-wire · DC PNP · Wiring diagram no. 13 · Connector groups 1, 2, 3, 68 10...30 > 6000 IP 65 / IP 67 100 -25...85 13 MK5155 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 6000 IP 65 / IP 67 100 -25...85 14 MK5159 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 10...30 > 6000 IP 65 / IP 67 100 -25...85 15 MK5139 Iload Ta Order no. [mA] [°C] Drawing no. 100 -25...85 12 MK5158 T-slot sensors for short-stroke cylinders for hygienic and wet areas Type Dimensions Material [mm] Cable 2 m · Output function 25 x 5 x 6.5 f [V] [Hz] Protection · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) Cable with connector 0.3 m · Output function 108, 109, 110, 135, 136 25 x 5 x 6.5 Ub PA (polyamide) 10...30 > 6000 IP 65 / IP 67 / IP 69K · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, > 6000 IP 65 / IP 67 / IP 69K 100 -25...85 11 MK5157 Ub f Protection Iload Ta Order no. [V] [Hz] [mA] [°C] Drawing no. 10...30 T-slot sensors with ATEX approval 1G/1D Type Dimensions Material [mm] Cable 6 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 6 25 x 5 x 6.5 PA (polyamide) – – IP 65 / IP 67 – -25...70 12 MK502A You can find wiring diagrams and scale drawings from page 180 173 Cylinder sensors T-slot sensors with ATEX approval 3D/3G Type Dimensions Material [mm] Cable 6 m · Output function 25 x 5 x 6.5 Ub f [V] [Hz] Protection Iload Ta Order no. [°C] Drawing no. [mA] · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) 10...30 > 6000 IP 65 / IP 67 100 -20...60 12 MK503A Ub f Protection Iload Ta Order no. [V] [Hz] [mA] [°C] Drawing no. 100 -25...60 2 MK500A T-slot sensors with ATEX approval 3D Type Dimensions Material [mm] Cable 2 m · Output function 25 x 5 x 6.5 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) Cable with connector 0.3 m · Output function 25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP 67 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 132, 134 10...30 > 10000 IP 67 100 -25...60 10 MK501A Protection Iload Ta Order no. [mA] [°C] Drawing no. IP 65 / IP 67 100 -25...85 16 MK5300 IP 65 / IP 67 100 -25...85 16 MK5306 Non flush C-slot sensors for industrial applications Type Dimensions Material [mm] Cable 2 m · Output function 17.5 x 2.8 x 7.7 Cable 2 m · Output function 17.5 x 2.8 x 7.7 PA (polyamide) [V] [Hz] 10...30 > 10000 · 3-wire · DC NPN · Wiring diagram no. 5 PA (polyamide) PA (polyamide) Cable with connector 0.3 m · Output function 17.5 x 2.8 x 7.7 f · 3-wire · DC PNP · Wiring diagram no. 4 Cable with connector 0.3 m · Output function 17.5 x 2.8 x 7.7 Ub PA (polyamide) 10...30 > 10000 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 10000 IP 65 / IP 67 -25...85 17 MK5301 · 3-wire · DC NPN · Wiring diagram no. 2 · Connector groups 1, 3, 68 10...30 > 10000 IP 65 / IP 67 Product selectors and further information can be found at: www.ifm.com 174 100 100 -25...85 17 MK5307 Cylinder sensors Type Dimensions Material [mm] Cable with connector 0.3 m · Output function 17.5 x 2.8 x 7.7 PA (polyamide) Cable with connector 0.5 m · Output function 17.5 x 2.8 x 7.7 PA (polyamide) Cable with connector 0.3 m · Output function 108, 109, 110, 135, 136 17.5 x 2.8 x 7.7 PA (polyamide) Ub f [V] [Hz] Protection Iload Ta [mA] [°C] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 10000 IP 65 / IP 67 100 -25...85 18 MK5302 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 10...30 > 10000 IP 65 / IP 67 100 -25...85 18 MK5305 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 10...30 > 10000 IP 65 / IP 67 100 -25...85 19 MK5304 Ub f Protection Iload Ta Order no. [V] [Hz] [mA] [°C] Drawing no. IP 65 / IP 67 100 -25...85 20 MK5312 IP 65 / IP 67 100 -25...85 20 MK5309 Flush C-slot sensors for industrial applications Type Dimensions Material [mm] Cable 2 m · Output function 25.8 x 2.8 x 5 Cable 2 m · Output function 25.8 x 2.8 x 5 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) 10...30 > 10000 · 3-wire · DC NPN · Wiring diagram no. 5 PA (polyamide) Cable with connector 0.3 m · Output function 10...30 > 10000 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 100 -25...85 21 MK5310 25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 100 -25...85 22 MK5311 Cable with connector 0.3 m · Output function 108, 110, 135 25.8 x 2.8 x 5 PA (polyamide) Cable with connector 0.3 m · Output function 25.8 x 2.8 x 5 PA (polyamide) · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 10...30 > 10000 IP 65 / IP 67 100 -25...85 23 MK5314 · 3-wire · DC NPN · Wiring diagram no. 2 · Connector groups 1, 3, 68 10...30 > 10000 IP 65 / IP 67 100 -25...85 21 MK5308 You can find wiring diagrams and scale drawings from page 180 175 Cylinder sensors Type Dimensions Material [mm] Cable with connector 0.5 m · Output function 25.8 x 2.8 x 5 Ub f [V] [Hz] Protection Iload Ta [mA] [°C] Drawing no. Order no. · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 PA (polyamide) 10...30 > 10000 IP 65 / IP 67 100 -25...85 22 MK5315 Ub f Protection Iload Ta Order no. [V] [Hz] [mA] [°C] Drawing no. 100 -25...85 20 MK5325 C-slot sensors for short-stroke cylinders Type Dimensions Material [mm] Cable 2 m · Output function 25.8 x 2.8 x 5 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) Cable with connector 0.3 m · Output function 10...30 > 5000 IP 65 / IP 67 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 25.8 x 2.8 x 5 PA (polyamide) 10...30 > 5000 IP 65 / IP 67 100 -25...85 21 MK5326 26.1 x 2.8 x 5.5 PA (polyamide) 10...30 > 5000 IP 65 / IP 67 100 -25...85 24 MK5328 IP 65 / IP 67 100 -25...85 25 MK5329 Cable 2 m · Output function 17.5 x 2.8 x 7.7 · 3-wire · DC PNP · Wiring diagram no. 4 PA (polyamide) Cable with connector 0.3 m · Output function 10...30 > 5000 · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 5000 IP 65 / IP 67 100 -25...85 26 MK5330 17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 5000 IP 65 / IP 67 100 -25...85 27 MK5331 Fixing straps for clean line cylinders Type Description Fixing strap for clean-line cylinders · Piston diameter · Ø 8...12 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11816 Fixing strap for clean-line cylinders · Piston diameter · Ø 16...20 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11817 Product selectors and further information can be found at: www.ifm.com 176 Order no. Cylinder sensors Type Description Order no. Fixing strap for clean-line cylinders · Piston diameter · Ø 25...32 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11818 Fixing strap for clean-line cylinders · Piston diameter · Ø 40 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11819 Fixing strap for clean-line cylinders · Piston diameter · Ø 50 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11820 Fixing strap for clean-line cylinders · Piston diameter · Ø 63 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11821 Fixing strap for clean-line cylinders · Piston diameter · Ø 80 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11822 Fixing strap for clean-line cylinders · Piston diameter · Ø 100 mm · for type MKT · Housing materials: adapter: PA / Fixing strap: stainless steel E11823 Fixing strap for clean-line cylinders · Ø 10...16 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11975 Fixing strap for clean-line cylinders · Ø 20...25 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11976 Fixing strap for clean-line cylinders · Ø 32 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11977 Fixing strap for clean-line cylinders · Ø 40 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11978 Fixing strap for clean-line cylinders · Ø 50 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11979 Fixing strap for clean-line cylinders · Ø 63 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11980 Fixing strap for clean-line cylinders · Ø 80 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11981 Fixing strap for clean-line cylinders · Ø 100 mm · for type MKT · Housing materials: adapter: stainless steel / Fixing strap: stainless steel E11982 You can find wiring diagrams and scale drawings from page 180 177 Cylinder sensors Clips Type Description Order no. Clip · for types MKT (T-slot cylinder sensors) · Piston diameter 12 mm · Housing materials: POM / fixture: aluminium / screw: stainless steel E11961 Clip · for types MKT (T-slot cylinder sensors) · Piston diameter 16 mm · Housing materials: POM / fixture: aluminium / screw: stainless steel E11958 Clip · for types MKT (T-slot cylinder sensors) · Piston diameter 20 mm · Housing materials: POM / fixture: aluminium / screw: stainless steel E11959 Clip · for types MKT and MKI (T-slot cylinder sensors) · Piston diameter 25 mm · Housing materials: POM / fixture: aluminium / screw: stainless steel E11960 Clip · for types MKT (T-slot cylinder sensors) · Clamping range 44-45 mm · Piston diameter 40 mm · Housing materials: POM / fixture: aluminium / screw: stainless steel E12015 Clip · for types MKT (T-slot cylinder sensors) · Clamping range 35-36 mm · Piston diameter 32 mm · Housing materials: POM / fixture: aluminium / screw: stainless steel E12017 Adapters for tie rod and integrated profile Type Description Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 5...11 mm · Housing materials: aluminium / screw: stainless steel E11797 Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 9...15 mm · Housing materials: aluminium / screw: stainless steel E11799 Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 14...20 mm · Housing materials: aluminium / screw: stainless steel E11801 Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 5...11 mm · Housing materials: aluminium / screw: stainless steel E12231 Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 9...13.5 mm · Housing materials: aluminium / screw: stainless steel E12232 Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 9...17 mm · Housing materials: aluminium / screw: stainless steel E12233 Product selectors and further information can be found at: www.ifm.com 178 Order no. Cylinder sensors Type Description Order no. Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 13...15 mm · Housing materials: aluminium / screw: stainless steel E12234 Adapter for tie rod cylinders (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Clamping range 3...5 mm · Housing materials: aluminium / screw: stainless steel E11913 Adapter for tie rod cylinders (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Clamping range 5...7 mm · Housing materials: aluminium / screw: stainless steel E11912 Adapters for trapezoidal slot cylinders Type Description Order no. Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw: stainless steel E11796 Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw: stainless steel E11957 Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw: stainless steel E11988 Various adapters and memorisation blocks Type Description Order no. Adapter for clean-line cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: PA · Pack quantity: 10 E11846 Adapter for clean-line cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: stainless steel E11877 Adapter for Bosch Rexroth cylinders ICL series and Festo cylinders type CDN · for types MKT (T-slot cylinder sensors) · Housing materials: adapter: aluminium anodised / screw: stainless steel E12164 Adapter for Bosch-Rexroth cylinders PRA / PRB series (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium / screw: stainless steel E11892 Adapter for Bosch-Rexroth cylinders 523 series (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · L-slot · Housing materials: aluminium / screw: stainless steel E11894 You can find wiring diagrams and scale drawings from page 180 179 Cylinder sensors Type Description Order no. Adapter for SMC cylinders ECDQ2 series (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · T-slot rail, flat · Housing materials: aluminium / screw: stainless steel E11890 Adapter for SMC cylinders CDQ2 series (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · T-slot rail, high · Housing materials: aluminium / screw: stainless steel E11891 Adapter for SMC cylinder CP95 · for types MKT (T-slot cylinder sensors) · Housing materials: stainless steel E11872 Adapter for Festo cylinders type DZH (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium / screw: stainless steel E11895 T-slot adapter for C-slot sensor · for types MKC (C-slot cylinder sensor) for installation in T-slot cylinders · (height 5 mm) · Housing materials: diecast zinc / fixing element: stainless steel E11928 T-slot adapter for C-slot sensor · for types MKC (C-slot cylinder sensor) for installation in T-slot cylinders · (height 7.7 mm) · Housing materials: diecast zinc / fixing element: stainless steel E11914 T-slot cylinder memorisation block · for types MKT (T-slot cylinder sensors) · Housing materials: PA / stainless steel E11798 C-slot cylinder memorisation block · for types MKC (C-slot cylinder sensors) · Housing materials: PA / stainless steel E12004 Wiring diagrams Core colours BK black BN brown BU blue 3 6 1 9 BN L1 L+ L+ L1 L+ BU N L BN L1 L+ 4 3 1 1 L+ 4 3 BU N L 4 L 7 10 L BN 1 L+ L+ BK BU 2 1 L+ 4 3 BK 4 L 5 BU L 8 N L 11 L BN L+ 1 L1 L+ BN 4 N L BU BK BU L Product selectors and further information can be found at: www.ifm.com 180 BN L+ L Cylinder sensors Wiring diagrams 12 13 BN 1 L+ L+ 4 BK BU 3 L L Scale drawings / drawing no. – CAD download: www.ifm.com 1 4 LED LED 35 27,5 5,1 8 18 M8x1 6,5 15,5 25,3 41,5 22 6,2 5 M8x1 5 5,7 L 8,5 2 1: Fastening clamp, 2: sensing face 1: fixing element, 2: combined head screw for fixing element 5 LED 5,1 6,5 2 5,1 6,5 LED 55 25,3 25,3 5 M12 x1 6,2 5,7 6,2 L 5 2 5,7 1: Fastening clamp, 2: sensing face 2 6 1: Fastening clamp, 2: sensing face LED 5,7 6,5 3 5,1 6,5 LED 30,5 5 13 25,3 37 5,7 2 5 M8x1 6,2 5,7 L 2 1: Fastening clamp, 2: sensing face 1: Fastening clamp, 2: sensing face 181 Cylinder sensors Scale drawings / drawing no. – CAD download: www.ifm.com 11 7 LED 55 30,5 37 5,1 6,5 5,7 6,5 LED 25,3 12 5,7 5 M12 x1 5 M8x1 13 5,7 L 2 L 1: Fastening clamp, 2: sensing face 2 1: Fastening clamp, 2: sensing face 8 12 LED 5,1 6,5 5,7 6,5 LED 30,5 41,5 25,3 13 5 5 M8x1 12 5,7 5,7 2 L 2 1: Fastening clamp, 2: sensing face 1: Fastening clamp, 2: sensing face 9 13 LED 30,5 12 M8x1 5 M12 x1 25,3 37 13 5 55 5,1 6,5 5,7 6,5 LED 5,7 5,7 L 2 L 1: Fastening clamp, 2: sensing face 2 1: Fastening clamp, 2: sensing face 10 14 LED 25,3 M8x1 5 M12 x1 5,7 L 2 1: Fastening clamp, 2: sensing face Product selectors and further information can be found at: www.ifm.com 182 12 5,7 L 1: Fastening clamp, 2: sensing face 25,3 41,5 6,2 5 55 5,1 6,5 5,1 6,5 LED 2 Cylinder sensors Scale drawings / drawing no. – CAD download: www.ifm.com 19 7,7 15 17,5 5,1 6,5 LED LED 55 4,2 4,8 M12 x1 25,3 12 5 M12 x1 2,8 55 L 2 1 5,7 L 2 1: Fastening clamp, 2: sensing face 1: Fastening clamp, 2: sensing face 20 7,7 5 16 25,8 17,5 LED 6,5 2,8 LED 4,8 2,8 4,2 4,8 1 1 2 2 1: Fastening clamp, 2: sensing face 1: Fastening clamp, 2: sensing face 21 7,7 5 17 25,8 17,5 2,8 37 M8x1 4,8 L L 1 6,5 4,8 M8x1 4,2 2,8 LED 37 LED 2 1 2 1: Fastening clamp, 2: sensing face 1: Fastening clamp, 2: sensing face 22 7,7 5 18 25,8 17,5 4,8 2,8 M8x1 4,2 41,5 M8x1 4,8 L L 6,5 2,8 LED 41,5 LED 1 2 1 2 1: Fastening clamp, 2: sensing face 5 23 25,8 LED 40 6,5 2,8 4,8 M12 x1 1: Fastening clamp, 2: sensing face L 1 2 1: Fastening clamp, 2: sensing face 183 Cylinder sensors Scale drawings / drawing no. – CAD download: www.ifm.com 5,5 7,7 26 24 17,5 26,1 LED 4,8 M8x1 M8x1 4,8 4,2 37 2,8 6,5 2,8 LED 41,5 L L 1 1: Fastening clamp 1 1: Fastening clamp 7,7 27 7,7 25 17,5 17,5 LED LED 4,2 4,2 2,8 41,5 2,8 4,8 M8x1 4,8 L 1 1: Fastening clamp 1: Fastening clamp Product selectors and further information can be found at: www.ifm.com 184 1 Cylinder sensors 185 Valve sensors Dual inductive feedback sensors for valves and actuators. Straightforward fit to standard actuators based on VDI / VDE 3845. AS-i dual sensor for quick and safe installation due to “plug & play”. Compact, weatherproof and low maintenance. Also available as complete set including all the accessories for a valve. Valve sensors In industrial processes where liquids, air or gases are used valves are needed for dosing and control. There is a wide variety of valve types; butterfly or ball valves being the most common quarter-turn types. These valves are seldom operated manually. Pneumatic valve actuators are normally used for mechanical positioning. The valve position must be monitored electronically. On the one hand to provide a feedback to the controller when a certain position (e.g. “open” or “closed”) is reached. On the other hand it is necessary to monitor the valves centrally. Mechanical switches are still often used for position feedback on the actuator shaft. For other solutions several inductive sensors are used together with a switch target for position detection. Disadvantage: Mounting is mechanically complex. Where there are temperature fluctuations condensing humidity leads to corrosion and thus malfunction. Operating principle An innovative design eliminates the disadvantages of these conventional solutions. In 1992 ifm electronic developed a standard which is now used by many leading actuator manufacturers. A round switch target, known as a “puck”, with two metal screws offset by 90° is mounted on the actuator shaft. The screws are located at a different height. A compact dual inductive sensor (type IND) with two integral sensors detects the upper or lower metal screw depending on the valve position and thus the two switch positions. Advantages Due to the simple construction the system operates safely with no wear at all. It is virtually resistant to external influence and meets the protection rating IP 67. Under certain conditions the unit can even be self-cleaning. Compared to conventional solutions the sensor weight is low. The sensors are also resistant to mechanical stress such as vibration and shock. 186 Feedback: Monitoring of pneumatic and manual valves must be possible. Valve sensors System overview Page Sensors for industrial applications 188 - 189 Sensors for industrial applications, AS-i system 189 Sensors with ATEX approval 1G/2G and 1D 190 Sensors with ATEX approval 3D and / or 3G 190 - 191 Sensors for rising stem valves 191 - 192 Sensors for rising stem valves, AS-i system 192 Added value packages with Bürkert solenoid valve 192 Added value packages with Norgren Herion solenoid valve 192 Switching cams for sensors with quarter-turn actuators 193 - 194 Accessories for sensors with quarter-turn actuators 194 - 195 Accessories for sensors with rising stem valve 195 Wiring diagrams 196 Scale drawings / drawing no. – CAD download: www.ifm.com 196 187 Valve sensors Sensors for industrial applications Type Dimensions Sensing range [mm] [mm] Cable 2 m · Output function 40 x 26 x 26 4 nf 4 nf 4 nf 4 nf Drawing no. Order no. [Hz] [mA] IP 67 1300 250 1 IN5251 IP 67 1300 250 1 IN5304 IP 67 1300 250 1 IN5323 IP 67 25 / 50 350 / 100 2 IN0110* [V] PBT 10...36 PC (polycarbonate) 10...36 PBT 10...36 PBT 20...250 · DC PNP/NPN · Wiring diagram no. 13 · Connector groups 9, 11, 107, 108, 135 4 nf M12 connector · Output function 40 x 26 x 47 Iload AC / DC · AC/DC · Wiring diagram no. 2 M12 connector · Output function 40 x 26 x 26 f AC / DC · DC PNP · Wiring diagram no. 1 Cable 2 m · Output function 40 x 26 x 40 Protection · DC PNP · Wiring diagram no. 1 Cable 10 m · Output function 40 x 26 x 26 Ub · DC PNP · Wiring diagram no. 1 Cable 6 m · Output function 40 x 26 x 26 Material PBT 10...36 IP 67 250 3 IN5224 · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 9, 11, 107, 108, 135 4 nf M12 connector · Output function PBT 10...36 IP 67 250 250 4 IN5331 · DC PNP · Wiring diagram no. 4 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 40 x 26 x 26 4 nf PBT 10...36 IP 67 1300 250 3 IN5225 40 x 26 x 47 4 nf PBT 10...36 IP 67 1300 250 4 IN5327 250 5 IN5285 M18 connector · Output function 40 x 26 x 26 · DC PNP · Wiring diagram no. 4 · Connector group 21 4 nf PBT 10...36 IP 67 Product selectors and further information can be found at: www.ifm.com 188 1300 1300 Valve sensors Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] M18 connector · Output function f AC / DC Iload AC / DC Drawing no. Order no. [Hz] [mA] 350 / 100 6 IN0108* · AC/DC · Wiring diagram no. 5 · Connector group 21 40 x 26 x 40 4 nf PBT Rd 24 x 1/8 connector 6 pins · Output function 40 x 26 x 60 4 nf Terminals · Output function 20...250 IP 67 25 / 50 · DC PNP · Connector groups 31, 38 PBT 10...36 IP 67 1300 250 7 IN5334 IP 67 500 100 8 IN5409 · DC PNP · Wiring diagram no. 14 33 x 60 x 92 4 nf PA (polyamide) 10...30 f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Sensors for industrial applications, AS-i system Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f AC / DC Iload AC / DC [Hz] [mA] Drawing no. Order no. 9 AC2315 10 AC2316 10 AC2317 M12 connector · 1 x 2 inputs · Wiring diagram no. 6 · Connector groups 11, 13, 14, 107, 113, 115, 135, 137 55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP 67 – – M12 connector · Output function transistor PNP · 2 inputs / 1 output · Connector groups 9, 11, 38, 108, 116 55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP 67 – – M12 connector · Output function transistor PNP · 2 inputs / 2 outputs · Connector groups 9, 11, 38, 108, 116 55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP 67 – – f = flush / nf = non flush You can find wiring diagrams and scale drawings from page 196 189 Valve sensors Sensors with ATEX approval 1G/2G and 1D Type Dimensions Sensing range [mm] [mm] Material Unom. at 1 KΩ Ub Internal capacit. Internal inductance f [V] [V] [nF] [μH] [Hz] Drawing no. Order no. M12 connector · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 7 · Connector group 131 40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 11 NN5008 Cable 2 m · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 8 40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 1 NN5009 Cable 10 m · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 8 40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 140 1800 1 NN5011 M18 connector · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 9 · Connector group 21 40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 5 NN5013 Rd 24 x 1/8 connector 6 pins · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Connector groups 31, 61 40 x 26 x 60 4 nf PBT 8.2 DC – 150 150 250 7 N95001 40 x 26 x 60 4 nf PBT 8.2 DC – 100 150 1300 7 N95002 f = flush / nf = non flush Sensors with ATEX approval 3D and / or 3G Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f AC / DC Iload AC / DC Drawing no. Order no. [Hz] [mA] – 10 AC317A – 10 AC316A M12 connector · Output function transistor PNP · 2 inputs / 2 outputs · Connector groups 132, 134 55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP5X – M12 connector · Output function transistor PNP · 2 inputs / 1 output · Connector groups 132, 134 55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP5X Product selectors and further information can be found at: www.ifm.com 190 – Valve sensors Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f AC / DC Iload AC / DC [Hz] [mA] Drawing no. Order no. M12 connector · Output function transistor PNP · 2 inputs / 1 output · Connector groups 132, 134 55 x 60 x 35 4 PBT (Pocan) 26.5...31.6 IP 67 – – 12 AC326A IP5X – – 9 AC315A M12 connector · 1 x 2 inputs · Wiring diagram no. 6 · Connector groups 132, 134 55 x 60 x 35 4 nf M12 connector · Output function 40 x 26 x 47 4 PBT 10...30 IP 67 1300 100 13 IN507A IP 67 1300 100 1 IN508A · DC PNP · Wiring diagram no. 1 4 nf M12 connector · Output function 40 x 26 x 47 26.5...31.6 · DC PNP · Wiring diagram no. 4 · Connector groups 132, 134 Cable 2 m · Output function 40 x 26 x 26 PBT (Pocan) PBT (Pocan) 10...30 · DC PNP · Wiring diagram no. 4 · Connector groups 132, 134 4 nf PBT (Pocan) 10...30 IP 67 1300 100 4 IN509A Material Ub Protection f AC / DC Iload AC / DC Drawing no. Order no. [Hz] [mA] – – 14 IX5002 – 100 15 IX5006 f = flush / nf = non flush Sensors for rising stem valves Type Dimensions Sensing range [mm] [mm] [V] Cable 2 m · Output function 1...5 V analogue · DC · Wiring diagram no. 10 67.5 x 43 x 110 0...80 PA 18...36 IP 65 / IP 67 Cable 2 m · Output function 3 x normally open · DC PNP · Wiring diagram no. 11 67.5 x 43 x 110 0...80 PA 18...36 IP 65 / IP 67 Cable with connector 0.3 m · Output function 3 x normally open · DC PNP · Wiring diagram no. 12 · Connector groups 113, 115, 137 65 x 52 x 110 0...80 PA 18...36 IP 65 / IP 67 – 100 16 IX5010 You can find wiring diagrams and scale drawings from page 196 191 Valve sensors Type Dimensions Sensing range [mm] [mm] Material Ub Protection [V] f AC / DC Iload AC / DC [Hz] [mA] Drawing no. Order no. Cable with connector 0.3 m · Output function 3 x normally open · DC PNP · Wiring diagram no. 12 · Connector groups 113, 115, 137 65 x 43 x 110 0.2 PA 18...36 IP 65 / IP 67 – 100 17 ZZ0214 Ub Protection f AC / DC Iload AC / DC Drawing no. Order no. [Hz] [mA] 16 IX5030 Sensors for rising stem valves, AS-i system Type Dimensions Sensing range [mm] [mm] Material [V] Cable with connector 0.3 m · AS-i · Wiring diagram no. 6 · Connector groups 11, 13, 14, 107, 113, 115, 135, 137 65 x 52 x 110 0...80 PA 26.5...31.6 IP 65 / IP 67 – – Added value packages with Bürkert solenoid valve Type Description Order no. Added value package AS-i for pneumatic quarter-turn actuators · A/B slave · Shaft height 20 mm · Hole spacing 80 mm · Connector AC0017 Added value package AS-i for pneumatic quarter-turn actuators · A/B slave · Shaft height 30 mm · Hole spacing 80 mm · Connector AC0019 Added value package AS-i for pneumatic quarter-turn actuators · A/B slave · Shaft height 30 mm · Hole spacing 130 mm · Connector AC0020 Added value packages with Norgren Herion solenoid valve Type Description Order no. Added value package AS-i for pneumatic quarter-turn actuators · A/B slave · Shaft height 20 mm · Hole spacing 80 mm · Connector AC0021 Added value package AS-i for pneumatic quarter-turn actuators · A/B slave · Shaft height 30 mm · Hole spacing 80 mm · Connector AC0022 Added value package AS-i for pneumatic quarter-turn actuators · A/B slave · Shaft height 30 mm · Hole spacing 130 mm · Connector AC0023 Product selectors and further information can be found at: www.ifm.com 192 Valve sensors Switching cams for sensors with quarter-turn actuators Type Description Order no. Target puck · Ø 53 mm · Adjustable between 0° and 360° · Housing materials: Target puck: PVC / screws: high-grade stainless steel E10661 Target puck · Ø 53 mm · 6 possible switching flag positions · with drain holes · Housing materials: Target puck: PA 6 / screws: highgrade stainless steel E17105 Target puck · Ø 53 mm · Housing materials: Target puck: PBT / screws: high-grade stainless steel E17118 Target puck · Ø 53 mm · 8 possible switching flag positions · with drain holes · Housing materials: Target puck: PA 6 / screws: highgrade stainless steel E17294 Target puck · Ø 53 mm · 3 possible switching flag positions · Housing materials: Target puck: PA 6 black / screws: V2A E17320 Target puck · Ø 53 mm · 8 possible switching flag positions · Housing materials: Target puck: PA 6 black / screws: V2A E17321 Target puck · Ø 53 mm · Housing colour: blue · 8 possible switching flag positions · Housing materials: Target puck: PA 6 blue / screws: V2A E17322 Target puck · Ø 53 mm · Housing colour: red · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17323 Target puck · Ø 55 mm · Inverted function · Housing materials: Target puck: PVC / screws: high-grade stainless steel / Metal ring: stainless steel E17205 Target puck · Ø 59 mm · for Neles actuator type B1CU 6/20E · Housing materials: Target puck: POM E11278 Target puck · Ø 65 mm · Housing materials: Target puck: PVC / screws: high-grade stainless steel E17148 Target puck · Ø 65 mm · Housing colour: black · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17324 Target puck · Ø 65 mm · Housing colour: blue · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17325 Target puck · Ø 65 mm · Housing colour: red · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17326 You can find wiring diagrams and scale drawings from page 196 193 Valve sensors Type Description Order no. Target puck · Ø 65 mm · Housing materials: Target puck: PA 6 / screws: V2A E17327 Target puck · Ø 102 · Housing materials: Target puck: PA 6 / screws: V2A E17328 Target puck · Ø 102 · Housing colour: black · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17329 Target puck · Ø 102 · Housing colour: blue · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17330 Target puck · Ø 102 · Housing colour: red · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17331 direction indicator black · 12 x 4.8 · For target puck · Housing materials: POM E17295 direction indicator yellow · 12 x 4.8 · For target puck · Housing materials: POM E17296 Accessories for sensors with quarter-turn actuators Type Description Spacer · 10 mm · for compensation between target pucks and dual sensor IND · Housing materials: PBT E10579 Spacer · 3 mm · for compensation between target pucks and dual sensor IND · Housing materials: PBT E10584 Spacer · 5 mm · for compensation between target pucks and dual sensor IND · Housing materials: PBT E10585 Cable gland · M20 x 1.5 · Housing materials: PA 6.6 E12208 Protective cap · M20 x 1.5 · Housing materials: PA 6.6 E12209 Plug for covering the oblong holes · Housing materials: EPDM · Pack quantity: 10 E12212 Product selectors and further information can be found at: www.ifm.com 194 Order no. Valve sensors Type Description Order no. reinforcement bracket · for type IND · Housing materials: stainless steel 316Ti / 1.4571 E11310 protective housing · Accessory for valve sensors · for type IND · Housing materials: stainless steel E11984 Mounting kit · MS-MEC-KU-RA—F04A · for ball valve Mecafrance ISO5211/F04 DN25 PN40 · Detection of the “ON/OFF” position by means of the IND dual sensor E10597 Mounting kit for limit position feedback · tyco 792E-100 · for Keystone actuators E11243 Accessories for sensors with rising stem valve Type Description Order no. Mounting adapter · for Kieselmann seat valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 1.4404 E12123 Mounting adapter · for Alfa Laval valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 316L / 1.4404 E11900 Mounting adapter · for Südmo valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 316L / 1.4404 E11989 Mounting adapter · for Georg Fischer diaphragm valve Diastar with mounting kit M12 · accessory for IX · Housing materials: adapter: POM / Target: stainless steel E12009 Mounting adapter · for Georg Fischer diaphragm valve Diastar with mounting kit M16 · accessory for IX · Housing materials: adapter: POM / Target: stainless steel E12010 Mounting adapter · for Bardiani valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 1.4404 E12170 Mounting adapter · IX / Ø 30 mm · for Gemü actuators with mounting kit · accessory for IX · Housing materials: adapter: POM / Target: stainless steel E12042 Mounting adapter · IX / Ø 45 mm · for Gemü actuators with mounting kit · accessory for IX · Housing materials: adapter: POM / Target: stainless steel E12043 You can find wiring diagrams and scale drawings from page 196 195 Valve sensors Wiring diagrams Core colours BN brown BU blue BK black WH white GY 4 8 1 BN grey A1 A2 1 BN L+ 4: 2: 12 4 BK WH 2 WH BU 3 BU L+ 1 L+ 2 4 1 Out 2 BK L L+ 5 2 Out 1 3 L 1 5 BN BK: WH: 9 L+ BK 1 WH 2 A1 A2 BU 4 L A1 A2 1+4 2+3 1 BN L1 L+ L1 L+ N L N L 3 L+ 1 3 WH L+ 2 2 BU 1 Out 2 4 BK Out 1 2 6 BN WH BK BK: BU: 10 L1 L+ L1 L+ N L N L A1 A2 BU 1 BN AS-i+ L+ BK 3 BU AS-i L 3 7 1 BN 11 L+ 2 WH 4 BK 1 BN L+ 4 BK L 3 BU 2 WH L 3 BU BN L+ 1 Out 1 L+ 2 L+ GY BK 1 WH Out 2 13 BU L 14 1 BN PNP 2 WH 4 BK 4: 3: A1 A2 3 BU 1 BN NPN L+ 2 WH L+ 4 BK L 1: 2: L A1 A2 3 BU L+ 1 L+ 2 L+ 4 L A1 A2 2: 4: L 3 L 5 IN + 6 IN - 7 OUT + 8 OUT - Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 26 13 4 40 8,5 5,5 5,5 26 8,5 LED 4,5 9 LED Product selectors and further information can be found at: www.ifm.com 196 4,5 A2 A1 30 40 6,5 A2 A1 40 30 LED 9 LED 6,5 4 26 13 Valve sensors Scale drawings / drawing no. – CAD download: www.ifm.com 8 3 40 60 92 26 8,5 4,5 18,8 6,3 6,5 A2 A1 30 40 M12 x1 LED 33 5,5 26 13 9 LED 47 30 60 M20x1,5 4 26 13 5,5 7,5 LED 4,5 6,5 A2 A1 30 40 M12 x1 5,5 26 8,5 1: sensor 1, 2: sensor 2, 3: LED OUT 2, 4: LED OUT 1 9 LED 9 5 55 35 26 40 49 26 8,5 60 LED 4,5 6,5 A2 A1 30 40 M18 x1 5,5 26 13 9 LED M12 x1 LED LED LED 6 67 26 13 40 A2 A1 4,5 6,5 LED 30 40 M18 x1 5,5 8,5 13 2 1 1: sensor 1, 2: sensor 2 9 LED 10 55 7 35 26 40 55 35 26 78 M12 x1 60 M12 x1 60 40 30 LED M12 x1 LED LED Rd24 x1 8 1 1: field connection 2 13 1 1: sensor 1, 2: sensor 2 197 Valve sensors Scale drawings / drawing no. – CAD download: www.ifm.com 14 11 40 26 13 67,5 5,5 26 8,5 80 87,5 110 6,5 9 99,6 4,5 A2 A1 30 40 M12 x1 LED 25 12 14 6 LED 6,2 26 34,8 38 60 M12 x1 40 55 M12 x1 43 LED LED LED 42 132 1: Max. spindle stroke , 2: Measuring range, 3: Initial value of the measuring range (zero point) 15 80 88,6 25 13 6,2 M12 x1 26 8,5 30 5,5 47 5,5 26 34,8 38 3 LED 3 4 43 4,5 106 34,6 50,7 30 1: Max. spindle stroke , 2: Measuring distance, 3: Initial value of the measuring range (zero point) , 4: Programming buttons 8,5 1 1: protective housing Product selectors and further information can be found at: www.ifm.com 198 14 6 99,6 110 30 105 M5 67,5 Valve sensors Scale drawings / drawing no. – CAD download: www.ifm.com 17 16 65 65 26 34,8 38 80 88,6 99,6 110 15,5 26,5 26 34,8 38 6,2 6,2 26,5 15,5 4,5 4,5 110 99,6 80 88,6 83,5 1 3 3 LED 4 52 25 30,6 10 2 14 19 24 4,3 27 46,5 1: Max. spindle stroke , 2: Measuring distance, 3: Initial value of the measuring range (zero point) , 4: Programming buttons 88 1: Valve sensor IX5010, 2: Mounting adapter E11900 199 Photoelectric sensors 200 Photoelectric sensors Infrared / red light sensors System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 202 - 203 204 - 233 233 - 234 234 - 245 Laser sensors System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 246 - 247 248 - 254 254 255 - 257 Distance detection System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 258 - 259 260 - 261 261 261 Fibre optics System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 262 - 263 264 - 273 273 274 - 280 For specific systems System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 282 - 283 284 - 288 288 - 289 289 - 292 Safety light curtains / light grids System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 294 - 295 296 - 314 314 315 - 318 201 Photoelectric sensors Visible red light for easy adjustment. Versions for use in hygienic and wet areas. LED display to check operation, switching status and function. Quick set-up due to easy teaching. Extensive range of system components for easy and safe mounting. Photoelectric sensors Automation technology can no longer be imagined without photoelectric sensors as “artificial eyes”. They are used where safe and non-contact detection of the exact position of objects is required. The material of the objects to be detected is of no importance. Compared to inductive sensors photoelectric sensors have a much higher sensing zone. Through-beam sensors A through-beam sensor is distinguished by a long range. The system consists of two separate components: a transmitter and a receiver. The light only travels one way (from the transmitter to the receiver). Adverse effects in the applications, such as dust in the air, dirt on the lenses, steam or mist do not immediately interfere with the system (high excess gain). Retro-reflective sensors For a retro-reflective sensor the transmitter and receiver are incorporated into one housing. By means of a reflector the transmitted light is returned to the receiver. The reflector reflects the light beam: For a retro-reflective sensor transmitter and receiver are integrated into one housing. Diffuse reflection sensors A diffuse reflection sensor is used for the direct detection of objects. Transmitter and receiver are incorporated into one housing. The transmitter emits light which is reflected by the object to be detected and seen by the receiver. This system evaluates the reflected light of an object. Therefore additional components (e.g. reflectors for retro-reflective sensors) are not necessary to operate a diffuse reflection sensor. Fixing options ifm electronic offers a complete component system of easy-to-use mounting sets that make installation easier for you. The solutions consist of a clamp which is fastened with only one screw, keeps the sensors safely in place and at the same time guarantees free movement in all axes. 202 Artificial eyes: Photoelectric sensors are used to detect positions in automation technology. Infrared / red light sensors System overview Page Cylindrical OF housing (M12) BasicLine 204 - 205 Cylindrical housing OG (M18) BasicLine 205 - 208 Cylindrical housing OG (M18) PerformanceLine 208 - 209 Cylindrical housing OG (M18) BasicLine with lateral sensing face 210 Cylindrical housing OG (M18) WetLine for hygienic and wet areas 210 - 212 OG housing (M18), rectangular 212 - 213 Rectangular OH housing BasicLine 213 - 215 Rectangular housing O7 BasicLine 215 - 216 Rectangular housing OJ BasicLine, lateral sensing face 216 - 217 Rectangular housing OJ PerformanceLine, lateral sensing face 217 - 218 Rectangular housing OJ PerformanceLine, front sensing face 219 - 220 Rectangular housing O5 BasicLine 221 Rectangular housing O5 PerformanceLine 221 - 222 Rectangular housing O5 PerformanceLine with ATEX approval 3D 222 - 223 Rectangular OL housing BasicLine 223 Rectangular housing O4 BasicLine 224 Rectangular housing O4 PerformanceLine 224 - 225 Prismatic reflectors, reflective tape and fixing components 225 - 226 Accessories OF housing 227 Accessories OG housing 227 Accessories OH housing 228 Accessories O7 housing 228 Accessories OJ housing 228 - 229 Accessories O5 housing 229 - 230 Accessories OL housing 230 - 231 Accessories O4 housing 231 Accessories for system components 232 - 233 Wiring diagrams 233 - 234 Scale drawings / drawing no. – CAD download: www.ifm.com 234 - 245 203 Photoelectric sensors Cylindrical OF housing (M12) BasicLine Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · Cable 2 m · 10...36 DC · metal · IP 67 Transmitter 4m infrared 700 – 1 1 OF5018 Receiver 4m infrared – H/D PNP 24 1 OF5019 2 2 OF5021 Through-beam sensor · M12 connector · 10...36 DC · metal · IP 65 · Connector groups 9, 11, 107, 108, 135 Transmitter 4m infrared 700 – Through-beam sensor · M12 connector · 10...36 DC · metal · IP 65 · Connector groups 9, 10, 11, 107, 108, 110, 135 Receiver 4m infrared – H/D PNP 25 3 OF5022 Retro-reflective sensor · Cable 2 m · 10...36 DC · metal · IP 67 Retro-reflective sensor 0.05...2 m infrared 140 H/D PNP 24 1 OF5014 Polarisation filter 0.2...0.8 m red 70 H/D PNP 24 1 OF5024 Retro-reflective sensor 0.05...2 m infrared 140 H/D NPN 26 1 OF5050 Retro-reflective sensor · M12 connector · 10...36 DC · metal · IP 65 · Connector groups 9, 10, 11, 107, 108, 110, 135 Retro-reflective sensor 0.05...2 m infrared 140 H/D PNP 25 3 OF5016 Polarisation filter 0.2...0.8 m red 70 H/D PNP 25 3 OF5025 Retro-reflective sensor · M12 connector · 10...36 DC · metal · IP 65 · Connector groups 9, 11, 107, 108, 135 Retro-reflective sensor 0.05...2 m infrared 140 H/D NPN 27 3 OF5051 Polarisation filter 0.2...0.8 m red 70 H/D NPN 27 3 OF5062 Product selectors and further information can be found at: www.ifm.com 204 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Diffuse reflection sensor · Cable 2 m · 10...36 DC · metal · IP 67 Diffuse reflection sensor 1...200 mm infrared 92 H/D PNP 24 1 OF5010 Diffuse reflection sensor 1...200 mm infrared 92 H/D NPN 28 1 OF5048 Diffuse reflection sensor 1...400 mm infrared 185 H/D PNP 24 1 OF5026 H/D PNP 24 1 OF5032 Diffuse reflection sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP 67 Diffuse reflection sensor 1...200 mm infrared 92 Diffuse reflection sensor · M12 connector · 10...36 DC · metal · IP 65 · Connector groups 9, 10, 11, 107, 108, 110, 135 Diffuse reflection sensor 1...200 mm infrared 92 H/D PNP 25 3 OF5012 Diffuse reflection sensor 1...400 mm infrared 185 H/D PNP 25 3 OF5027 Diffuse reflection sensor · M12 connector · 10...36 DC · metal · IP 65 · Connector groups 9, 11, 107, 108, 135 Diffuse reflection sensor 1...200 mm infrared 92 H/D NPN 29 3 OF5049 Diffuse reflection sensor 1...400 mm infrared 185 H/D NPN 29 3 OF5060 Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 4 OGS100 Cylindrical housing OG (M18) BasicLine Type Operating principle Range Through-beam sensor · M12 connector · 10...30 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 8m red 600 – 2 Through-beam sensor · M12 connector · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 8m red – D PNP 3 4 OGE100 You can find wiring diagrams and scale drawings from page 233 205 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 8m red – H PNP 4 4 OGE101 Receiver 8m red – D NPN 5 4 OGE102 Receiver 8m red – H NPN 5 4 OGE103 Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 20 m red 800 – 2 5 OGS200 Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 20 m red – D PNP 3 5 OGE200 Receiver 20 m red – H PNP 4 5 OGE201 Through-beam sensor · Cable 2 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Transmitter 15 m infrared 2000 – 6 6 OG0028 Receiver 15 m infrared – H AC/DC 7 6 OG0029 Receiver 15 m infrared – D AC/DC 7 6 OG0038 Through-beam sensor · 1/2“ connector · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 · Connector group 26 Transmitter 15 m infrared 2000 – 8 7 OG0030 Receiver 15 m infrared – H AC/DC 9 7 OG0031 Receiver 15 m infrared – D AC/DC 9 7 OG0039 Retro-reflective sensor · M12 connector · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.05...2.5 m red 200 Product selectors and further information can be found at: www.ifm.com 206 D PNP 3 4 OGP100 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Retro-reflective sensor · M12 connector · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.05...2.5 m red 200 H PNP 4 4 OGP101 Polarisation filter 0.05...2.5 m red 200 D NPN 5 4 OGP102 Polarisation filter 0.05...2.5 m red 200 H NPN 5 4 OGP103 Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.03...4 m red 160 D PNP 3 5 OGP200 Polarisation filter 0.03...4 m red 160 H PNP 4 5 OGP201 Retro-reflective sensor · Cable 2 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Polarisation filter 3m red 262 H AC/DC 7 6 OG0043 Polarisation filter 3m red 262 D AC/DC 7 6 OG0032 Retro-reflective sensor · 1/2“ connector · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 · Connector group 26 Polarisation filter 3m red 262 H AC/DC 9 7 OG0044 Polarisation filter 3m red 262 D AC/DC 9 7 OG0033 Diffuse reflection sensor · M12 connector · 10...30 DC · plastics · IP 65 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Diffuse reflection sensor 10...400 mm red 25 H PNP 3 8 OGT100 Diffuse reflection sensor 10...400 mm red 25 D PNP 3 8 OGT101 Diffuse reflection sensor 10...400 mm red 25 H NPN 5 8 OGT102 Diffuse reflection sensor 10...400 mm red 25 D NPN 5 8 OGT103 You can find wiring diagrams and scale drawings from page 233 207 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 65 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Diffuse reflection sensor 2...600 mm red 50 H PNP 3 9 OGT200 Background suppression 15...250 mm red 15 H PNP 3 9 OGH200 Diffuse reflection sensor · Cable 2 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Diffuse reflection sensor 1...600 mm infrared < 169 H AC/DC 7 6 OG0034 Diffuse reflection sensor 1...600 mm infrared < 169 D AC/DC 7 6 OG0040 7 6 OG0047 Diffuse reflection sensor · Cable 0.377 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Diffuse reflection sensor 1...600 mm infrared < 169 H AC/DC Diffuse reflection sensor · 1/2" connector · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 · Connector group 26 Diffuse reflection sensor 1...600 mm infrared < 169 H AC/DC 9 7 OG0035 Diffuse reflection sensor 1...600 mm infrared < 169 D AC/DC 9 7 OG0041 * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Cylindrical housing OG (M18) PerformanceLine Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · Cable 2 m · 10...36 DC · high-grade stainless steel · IP 67 Transmitter 25 m red 1000 – 1 10 OGS501 Receiver 25 m red – H/D PNP 10 11 OGE502 Product selectors and further information can be found at: www.ifm.com 208 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 25 m red 1000 – 2 12 OGS500 Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 25 m red – H/D PNP 3 13 OGE500 H/D PNP 10 11 OGP502 Retro-reflective sensor · Cable 2 m · 10...36 DC · high-grade stainless steel · IP 67 Polarisation filter 0.03...5 m red 200 Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.03...5 m red 200 H/D PNP 3 13 OGP500 Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 11, 107, 108, 135 Polarisation filter 0.03...5 m red 200 H/D NPN 5 13 OGP503 H/D PNP 10 11 OGH501 Diffuse reflection sensor · Cable 2 m · 10...36 DC · high-grade stainless steel · IP 67 Background suppression 15...300 mm red 25 Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Diffuse reflection sensor 2...800 mm red 66 H/D PNP 3 13 OGT500 Background suppression 15...300 mm red 25 H/D PNP 3 13 OGH500 Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 · Connector groups 9, 11, 107, 108, 135 Background suppression 15...300 mm red 25 H/D NPN 5 13 OGH504 Background suppression 15...300 mm red 25 H/D NPN 5 13 OGH502 You can find wiring diagrams and scale drawings from page 233 209 Photoelectric sensors Cylindrical housing OG (M18) BasicLine with lateral sensing face Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP 68 · Connector groups 9, 11, 107, 108, 135 Transmitter 9m red < 3000 – 2 14 OG5129 Receiver 9m red – H PNP 11 14 OG5127 Receiver 9m red – D PNP 12 14 OG5128 Retro-reflective sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP 68 · Connector groups 9, 11, 107, 108, 135 Polarisation filter 3m red < 96 H PNP 11 14 OG5125 Polarisation filter 3m red < 96 D PNP 12 14 OG5126 Diffuse reflection sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP 68 · Connector groups 9, 11, 107, 108, 135 Background suppression 100 mm red < 16 H PNP 11 15 OG5123 Diffuse reflection sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP 68 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 200 mm red < 28 H PNP 11 15 OG5124 Wiring diagr. no. Drawing no. Order no. Cylindrical housing OG (M18) WetLine for hygienic and wet areas Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Through-beam sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K Transmitter 20 m red 800 – 1 16 OGS301 Receiver 20 m red – D PNP 10 16 OGE302 Receiver 20 m red – H PNP 10 16 OGE303 Product selectors and further information can be found at: www.ifm.com 210 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K · Connector group 107 Transmitter 20 m red 800 – 2 5 OGS300 Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K · Connector groups 107, 109 Receiver 20 m red – D PNP 3 5 OGE300 Receiver 20 m red – H PNP 4 5 OGE301 Retro-reflective sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K Polarisation filter 0.03...4 m red 160 D PNP 10 16 OGP302 Polarisation filter 0.03...4 m red 160 H PNP 10 16 OGP303 Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K · Connector groups 107, 109 Polarisation filter 0.03...4 m red 160 D PNP 3 5 OGP300 Polarisation filter 0.03...4 m red 160 H PNP 4 5 OGP301 Diffuse reflection sensor · Cable 6 m · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K Background suppression 100 mm red 8 H PNP 10 17 OGH306 Background suppression 100 mm red 8 D PNP 10 17 OGH307 Background suppression 200 mm red 12 H PNP 10 17 OGH308 Background suppression 200 mm red 12 D PNP 10 17 OGH309 Background suppression 300 mm red 15 H PNP 10 17 OGH310 Background suppression 300 mm red 15 D PNP 10 17 OGH311 You can find wiring diagrams and scale drawings from page 233 211 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 67 / IP 68 / IP 69K · Connector groups 107, 109 Background suppression 100 mm red 8 H PNP 3 18 OGH300 Background suppression 100 mm red 8 D PNP 3 18 OGH301 Background suppression 200 mm red 12 H PNP 3 18 OGH302 Background suppression 200 mm red 12 D PNP 3 18 OGH303 Background suppression 300 mm red 15 H PNP 3 18 OGH304 Background suppression 300 mm red 15 D PNP 3 18 OGH305 Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. OG housing (M18), rectangular Type Operating principle Range Through-beam sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 20 m red 800 – 2 19 OGS280 Receiver 20 m red – D NPN 13 19 OGE282 Through-beam sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 20 m red – D PNP 14 19 OGE280 Receiver 20 m red – H PNP 4 19 OGE281 Retro-reflective sensor · M12 connector · 10...30 DC · metal · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.1...4 m red 160 D PNP 14 19 OGP280 Polarisation filter 0.1...4 m red 160 H PNP 4 19 OGP281 Product selectors and further information can be found at: www.ifm.com 212 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Retro-reflective sensor · M12 connector · 10...30 DC · metal · IP 67 · Connector groups 9, 11, 107, 108, 135 Polarisation filter 0.1...4 m red 160 D NPN 13 19 OGP282 Polarisation filter 0.1...4 m red 160 H NPN 15 19 OGP283 Diffuse reflection sensor · M12 connector · 10...30 DC · metal · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 100 mm red 7 H PNP 4 19 OGH280 Background suppression 200 mm red 13 H PNP 4 19 OGH281 Background suppression 15...200 mm red 13 H/D PNP 3 20 OGH580 Diffuse reflection sensor · M12 connector · 10...30 DC · metal · IP 67 · Connector groups 9, 11, 107, 108, 135 Background suppression 100 mm red 7 H NPN 15 19 OGH282 Background suppression 200 mm red 13 H NPN 15 19 OGH283 Background suppression 15...200 mm red 13 H/D NPN 5 20 OGH581 Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Rectangular OH housing BasicLine Type Operating principle Range Through-beam sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Transmitter 1.2 m red 10 – 1 21 OH5001 Receiver 1.2 m red – D PNP 16 21 OH5002 21 OH5020 Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 1, 3, 68 Transmitter 1.2 m red 10 – 2 You can find wiring diagrams and scale drawings from page 233 213 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 21 OH5015 Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 1, 2, 3, 68 Receiver 1.2 m red – D PNP 14 Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Transmitter 1.2 m red 10 – 2 21 OH5012 Receiver 1.2 m red – D PNP 14 21 OH5003 10 D PNP 16 22 OH5010 22 OH5019 Retro-reflective sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Polarisation filter 0.8 m red Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 1, 2, 3, 68 Polarisation filter 0.8 m red 10 D PNP 14 Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Polarisation filter 0.8 m red 10 D PNP 14 22 OH5011 Diffuse reflection sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Background suppression 1...15 mm red 2.5 H PNP 17 23 OH5008 Background suppression 1...30 mm red 4.5 H PNP 17 23 OH5006 Diffuse reflection sensor 2...50 mm red 3.5 H PNP 17 23 OH5004 Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 1, 2, 3, 68 Diffuse reflection sensor 2...50 mm red 3.5 H PNP 4 23 OH5016 Background suppression 1...15 mm red 2.5 H PNP 4 23 OH5018 Background suppression 1...30 mm red 4.5 H PNP 4 23 OH5017 Product selectors and further information can be found at: www.ifm.com 214 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Diffuse reflection sensor 2...50 mm red 3.5 H PNP 4 23 OH5005 Background suppression 1...15 mm red 2.5 H PNP 4 23 OH5009 Background suppression 1...30 mm red 4.5 H PNP 4 23 OH5007 Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 24 O7S200 Rectangular housing O7 BasicLine Type Operating principle Range Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 65 · Connector groups 1, 3, 68 Transmitter 0...1.5 m red 90 – 2 Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 65 · Connector groups 1, 2, 3, 68 Receiver 0...1.5 m red – D PNP 14 25 O7E200 Receiver 0...1.5 m red – H PNP 4 25 O7E201 Receiver 0...1.5 m red – D NPN 13 25 O7E202 Receiver 0...1.5 m red – H NPN 15 25 O7E203 Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 65 · Connector groups 1, 2, 3, 68 Polarisation filter 0.03...1 m red 55 D PNP 14 26 O7P200 Polarisation filter 0.03...1 m red 55 H PNP 4 26 O7P201 Polarisation filter 0.03...1 m red 55 D NPN 13 26 O7P202 Polarisation filter 0.03...1 m red 55 H NPN 15 26 O7P203 You can find wiring diagrams and scale drawings from page 233 215 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP 65 · Connector groups 1, 2, 3, 68 Background suppression 1...30 mm red 2.5 H PNP 4 27 O7H200 Background suppression 1...30 mm red 2.5 D PNP 14 27 O7H201 Background suppression 1...30 mm red 2.5 H NPN 15 27 O7H206 Background suppression 1...30 mm red 2.5 D NPN 13 27 O7H207 Background suppression 0...50 mm red 2.5 H PNP 4 27 O7H202 Background suppression 0...50 mm red 2.5 H NPN 15 27 O7H208 Background suppression 0...50 mm red 2.5 D NPN 13 27 O7H209 Background suppression 0...50 mm red 2.5 D PNP 14 27 O7H203 Background suppression 0...100 mm red 7 H PNP 4 27 O7H204 Background suppression 0...100 mm red 7 D PNP 14 27 O7H205 Background suppression 0...100 mm red 7 H NPN 15 27 O7H210 Background suppression 0...100 mm red 7 D NPN 13 27 O7H211 Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 2 28 OJS200 Rectangular housing OJ BasicLine, lateral sensing face Type Operating principle Range Type of light Spot Ø at max. range [mm] Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 1, 3, 68 Transmitter 0...10 m red < 1000 Product selectors and further information can be found at: www.ifm.com 216 – Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 3 28 OJE200 Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 1, 2, 3, 68 Receiver 10 m – – D PNP Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 1, 2, 3, 68 Retro-reflective sensor 1.8 m red 64 D PNP 3 28 OJR200 Polarisation filter 1.8 m red 64 D PNP 3 28 OJP200 H PNP 3 29 OJH200 Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 1, 2, 3, 68 Background suppression 100 mm red < 13 Rectangular housing OJ PerformanceLine, lateral sensing face Type Operating principle Range Type of light Through-beam sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Transmitter 10 m red 1000 – 1 30 OJ5033 Receiver 10 m red – H/D PNP 18 30 OJ5034 Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Transmitter 10 m red 1000 – 2 31 OJ5030 Receiver 10 m red – H/D PNP 19 31 OJ5031 Receiver 10 m red – H/D NPN 20 31 OJ5032 Transmitter 10 m red 1000 – 2 32 OJ5130 Receiver 10 m – – H/D PNP 19 32 OJ5131 You can find wiring diagrams and scale drawings from page 233 217 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 64 H/D PNP 18 30 OJ5028 Retro-reflective sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Polarisation filter 0...2 m red Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Polarisation filter 0...2 m red 64 H/D PNP 19 31 OJ5026 Polarisation filter 0...2 m red 64 H/D NPN 20 31 OJ5027 Polarisation filter 0...2 m red 64 H/D PNP 19 32 OJ5126 60 H/D PNP 18 33 OJ5024 Diffuse reflection sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Diffuse reflection sensor 1...600 mm red Diffuse reflection sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 107, 108, 110, 135 Background suppression 15...400 mm red < 18 H/D PNP 19 34 OJ5078 Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Diffuse reflection sensor 1...600 mm red 60 H/D PNP 19 35 OJ5022 Diffuse reflection sensor 1...600 mm red 60 H/D NPN 20 35 OJ5023 Diffuse reflection sensor 1...1000 mm infrared 150 H/D PNP 19 35 OJ5071 Background suppression 15...400 mm red < 18 H/D PNP 19 36 OJ5048 Diffuse reflection sensor 1...600 mm red 60 H/D PNP 19 37 OJ5122 Background suppression 15...400 mm red < 18 H/D PNP 19 38 OJ5148 Product selectors and further information can be found at: www.ifm.com 218 Infrared / red light sensors Rectangular housing OJ PerformanceLine, front sensing face Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Transmitter 10 m red 1000 – 1 39 OJ5011 Receiver 10 m red – H/D PNP 18 39 OJ5012 Through-beam sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 10 m red 1000 – 2 39 OJ5065 Through-beam sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 107, 108, 110, 135 Receiver 10 m red – H/D PNP 19 39 OJ5067 Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Transmitter 10 m red 1000 – 2 40 OJ5008 Receiver 10 m red – H/D PNP 19 40 OJ5009 Receiver 10 m red – H/D NPN 20 40 OJ5010 Transmitter 10 m red 1000 – 2 41 OJ5108 Receiver 10 m red – H/D PNP 19 41 OJ5109 64 H/D PNP 18 39 OJ5006 Retro-reflective sensor · Cable 2 m · 10...30 DC · plastics · IP 67 Polarisation filter 0...2 m red Retro-reflective sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 107, 108, 110, 135 Polarisation filter 0...2 m red 64 H/D PNP 19 39 OJ5063 Polarisation filter 0...2 m red 64 H/D PNP 19 39 OJ5062 You can find wiring diagrams and scale drawings from page 233 219 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Polarisation filter 0...2 m red 64 H/D PNP 19 40 OJ5004 Polarisation filter 0...2 m red 64 H/D NPN 20 40 OJ5005 Polarisation filter 0...2 m red 64 H/D PNP 19 41 OJ5104 Diffuse reflection sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Diffuse reflection sensor 1...600 mm red 60 H/D PNP 19 42 OJ5061 Diffuse reflection sensor 1...600 mm red 60 H/D PNP 19 42 OJ5060 Background suppression 15...400 mm red < 18 H/D PNP 19 43 OJ5069 Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Diffuse reflection sensor 1...600 mm red 60 H/D PNP 19 44 OJ5000 Diffuse reflection sensor 1...600 mm red 60 H/D NPN 20 44 OJ5001 Diffuse reflection sensor 1...1000 mm infrared 150 H/D PNP 19 44 OJ5070 Background suppression 15...400 mm red < 18 H/D PNP 19 45 OJ5044 Diffuse reflection sensor 1...600 mm red 60 H/D PNP 19 46 OJ5100 Background suppression 15...400 mm red < 18 H/D PNP 19 47 OJ5144 Product selectors and further information can be found at: www.ifm.com 220 Infrared / red light sensors Rectangular housing O5 BasicLine Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 48 O5S200 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 20 m red 500 – 2 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 20 m red – D PNP 14 48 O5E200 Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.1...7 m red 175 D PNP 14 49 O5P200 Polarisation filter 0.1...7 m red 175 H PNP 21 49 O5P201 Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP 65 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 50...1400 mm red 50 H PNP 4 50 O5H200 Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Background suppression 50...1400 mm red 50 H NPN 15 50 O5H201 Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Rectangular housing O5 PerformanceLine Type Operating principle Range Through-beam sensor · Cable 2 m · 10...36 DC · plastics · IP 67 Transmitter 25 m red 625 – 1 51 O5S501 Receiver 25 m red – H/D PNP 10 52 O5E501 48 O5S500 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 25 m red 625 – 2 You can find wiring diagrams and scale drawings from page 233 221 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 25 m red – H/D PNP 3 53 O5E500 Receiver 25 m red – H/D NPN 5 53 O5E502 250 H/D PNP 10 54 O5P501 Retro-reflective sensor · Cable 2 m · 10...36 DC · plastics · IP 67 Polarisation filter 0.075...10 m red Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.075...10 m red 250 H/D PNP 3 55 O5P500 Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Polarisation filter 0.075...10 m red 250 H/D NPN 5 55 O5P502 50 H/D PNP 10 54 O5H503 Diffuse reflection sensor · Cable 2 m · 10...36 DC · plastics · IP 67 Background suppression 50...1800 mm red Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 50...1800 mm red 50 H/D PNP 3 55 O5H500 Background suppression 60...700 mm red 35 H/D PNP 3 55 O5H501 Background suppression 50...1800 mm red 50 H/D NPN 5 55 O5H504 Wiring diagr. no. Drawing no. Order no. 2 56 O5S51A Rectangular housing O5 PerformanceLine with ATEX approval 3D Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Through-beam sensor · M12 connector · 10...30 DC · plastics · IP 65 · Connector groups 132, 134 Transmitter 25 m red 625 Product selectors and further information can be found at: www.ifm.com 222 – Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 3 56 O5E51A 3 56 O5P51A Through-beam sensor · M12 connector · 10...30 DC · plastics · IP 65 · Connector groups 132, 134 Receiver 25 m red – H/D PNP Retro-reflective sensor · M12 connector · 10...30 DC · plastics · IP 65 · Connector groups 132, 134 Polarisation filter 0.075...10 m red 250 H/D PNP Diffuse reflection sensor · M12 connector · 10...30 DC · plastics · IP 65 · Connector groups 132, 134 Background suppression 50...1800 mm red 50 H/D PNP 3 56 O5H51A Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Rectangular OL housing BasicLine Type Operating principle Range Through-beam sensor · Terminals · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Transmitter 25 m infrared < 2500 – 22 57 OL0006 Receiver 25 m infrared – H/D relay 23 57 OL0007 H/D relay 23 58 OL0004* Retro-reflective sensor · Terminals · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Polarisation filter 0.3...5 m red 250 Diffuse reflection sensor · Terminals · 20...250 AC/DC (47...63 Hz AC) · plastics · IP 67 Diffuse reflection sensor 1...1000 mm infrared < 300 H/D relay 23 57 OL0005* Diffuse reflection sensor 1...800 mm infrared < 80 H/D relay 23 57 OL0009* * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. You can find wiring diagrams and scale drawings from page 233 223 Photoelectric sensors Rectangular housing O4 BasicLine Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 59 O4S200 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 0...50 m red 1000 – 2 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 0...50 m red – D PNP 14 60 O4E200 Receiver 0...50 m red – H PNP 4 60 O4E201 Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.3...18 m red 500 D PNP 14 61 O4P200 Polarisation filter 0.3...18 m red 500 H PNP 4 61 O4P201 Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP 65 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 100...2000 mm red 100 H PNP 4 62 O4H200 Background suppression 100...2000 mm red 100 D PNP 14 62 O4H201 Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Rectangular housing O4 PerformanceLine Type Operating principle Range Through-beam sensor · Cable 2 m · 10...36 DC · plastics · IP 67 Transmitter 80 m red 2400 – 1 63 O4S501 Receiver 80 m red – H/D PNP 10 64 O4E501 59 O4S500 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 80 m red 2400 Product selectors and further information can be found at: www.ifm.com 224 – 2 Infrared / red light sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 80 m red – H/D PNP 3 65 O4E500 660 H/D PNP 10 66 O4P501 Retro-reflective sensor · Cable 2 m · 10...36 DC · plastics · IP 67 Polarisation filter 0.3...22 m red Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.3...22 m red 660 H/D PNP 3 67 O4P500 50 H/D PNP 10 68 O4H501 Diffuse reflection sensor · Cable 2 m · 10...36 DC · plastics · IP 67 Background suppression 100...2600 mm red Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 100...2600 mm red 50 H/D PNP 3 69 O4H500 Prismatic reflectors, reflective tape and fixing components Type Description Order no. Prismatic reflector · Ø 20 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20003 Prismatic reflector · Ø 25 mm · round · fixing by screw · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20953 Prismatic reflector · Ø 35 mm · round · fixing by screw · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20954 Prismatic reflector · Ø 42 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20004 Prismatic reflector · Ø 50 mm · round · fixing by screw · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20956 You can find wiring diagrams and scale drawings from page 233 225 Photoelectric sensors Type Description Prismatic reflector · Ø 80 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20005 Prismatic reflector · 18 x 40 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E21115 Prismatic reflector · 45 x 28 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20452 Prismatic reflector · 50 x 50 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20744 Prismatic reflector · 93 x 45 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20453 Prismatic reflector · 95 x 95 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20454 Mounting set · for reflector · Clamp mounting · rod mounting Ø 30 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: aluminium transparent anodised E21007 Mounting set · for reflector · Ø 25 mm · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20903 Mounting set · for reflector · Ø 35 mm · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20907 Mounting set · for reflector · Ø 50 mm · Clamp mounting · free-standing M10 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20911 Mounting set · for reflector · Ø 80 mm · Clamp mounting · free-standing M12 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20914 Mounting set · for reflector · Ø 80 mm · Clamp mounting · free-standing M12 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20915 Angle bracket · for reflector · 50 x 50 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 E20724 Reflective tape · TS-02 · 50 x 1000 mm · for red light and infrared light retro-reflective sensors · Housing materials: plastics E21015 Product selectors and further information can be found at: www.ifm.com 226 Order no. Infrared / red light sensors Accessories OF housing Type Description Order no. angle support · 90° · for type OF · Housing materials: housing: ABS / lens: PC E20590 Angle bracket · Ø 12 mm · with end stop · Mounting clamp · Clamp mounting · for type IF, KF, OF · Housing materials: clamp: diecast zinc / fixture: stainless steel / Mounting clamp: PC black E21144 Mounting set · Ø 12.2 mm · Clamp mounting · rod mounting Ø 10 mm · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21200 Mounting set · Ø 12.2 mm · Clamp mounting · rod mounting Ø 10 mm · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E21201 Mounting set · Ø 12.2 mm · Clamp mounting · rod mounting Ø 10 mm · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21202 Mounting set · Ø 12.2 mm · Clamp mounting · rod mounting Ø 10 mm · for type OF, IF · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E21203 Accessories OG housing Type Description Order no. Angle bracket · for type M18 · Housing materials: stainless steel E10736 Angle bracket · Ø 18 mm · with end stop · Mounting clamp · Clamp mounting · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: stainless steel / Mounting clamp: PC black E21145 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20720 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20721 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: high-grade stainless steel / fixture: high-grade stainless steel E21206 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: high-grade stainless steel / fixture: high-grade stainless steel E21207 You can find wiring diagrams and scale drawings from page 233 227 Photoelectric sensors Accessories OH housing Type Description Order no. Angle bracket · for free-standing mounting · for type OH · Housing materials: Angle bracket: stainless steel 316Ti / 1.4571 E21057 Mounting set · for type OH · Housing materials: ABS E21056 Accessories O7 housing Type Description Order no. Mounting set · O7 · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel / clamp: stainless steel / screw: stainless steel / Nut: stainless steel E21237 Mounting set · O7 · Free-standing mounting · free-standing · Housing materials: fixture: stainless steel / screws: stainless steel E21238 Mounting set · O7 · Free-standing mounting · with fine adjustment · free-standing · Housing materials: fixture: stainless steel / Spring: spring steel / screws: stainless steel E21239 Mounting set · O7 · ball joint · free-standing · Housing materials: fixture: diecast zinc / mounting base: diecast zinc / screws: stainless steel E21240 Accessories OJ housing Type Description Angle bracket · for type OJ · Housing materials: high-grade stainless steel E20984 Basic clip · OJ · Housing materials: high-grade stainless steel E20965 Basic clip · OJ · Housing materials: diecast zinc E20964 Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974 Product selectors and further information can be found at: www.ifm.com 228 Order no. Infrared / red light sensors Type Description Order no. Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20968 Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20969 Mounting set · OJ · for side lens · rod mounting Ø 10 mm · Housing materials: clamp: diecast zinc / fixture: stainless steel 316Ti / 1.4571 E21095 Mounting set · OJ · for side lens · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21222 Mounting set · OJ · for side lens · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20973 Mounting set · OJ · for front lens · Clamp mounting · free-standing M8 · Housing materials: clamp: diecast zinc / fixture: stainless steel 316Ti / 1.4571 E20966 Mounting set · OJ · for front lens · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20970 Mounting set · OJ · for front lens · Clamp mounting · rod mounting · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E21221 Accessories O5 housing Type Description Order no. Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087 Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21085 Angle bracket · O5, O4 · for mounting O5, O4 sensors instead of OL sensors · Dovetail clamp · Housing materials: Dovetail clamp: AlMgSi0.5 / fixture: AlMg3 E21122 Dovetail clamp · for type DTS, O4, O5 · Housing materials: AlMgSi0.5 E21088 Mounting brackets Mounting on the back of the unit · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21086 You can find wiring diagrams and scale drawings from page 233 229 Photoelectric sensors Type Description Order no. Mounting sleeve · O5 · for mounting O5 sensors instead of OC sensors · Housing materials: AlZnMgCu1.5 F51/52 E21114 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 12 mm · for type O5 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: high-grade stainless steel E21223 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 12 mm · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21210 Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21211 Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: high-grade stainless steel E21212 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 14 mm · for type O5 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E21142 Mounting set · Clamp mounting · with protective cover · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21084 Mounting set · Clamp mounting · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21083 Accessories OL housing Type Description Angle bracket · for type OL · Housing materials: stainless steel E20788 Angle bracket · with protective cover · for type OL · Housing materials: stainless steel E20789 Mounting set · Clamp mounting · free-standing M12 · for type OL · Housing materials: fixture: stainless steel / clamp: diecast zinc E20792 Mounting set · OL · Clamp mounting · rod mounting Ø 40 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: aluminium transparent anodised E21012 Mounting set · Clamp mounting · with protective cover · free-standing M12 · for type OL · Housing materials: fixture: stainless steel / clamp: diecast zinc E20793 Product selectors and further information can be found at: www.ifm.com 230 Order no. Infrared / red light sensors Type Description Mounting set · Clamp mounting · with protective cover · free-standing M12 · for type OL · Housing materials: clamp: stainless steel / fixture: stainless steel 316Ti / 1.4571 Order no. E20877 Accessories O4 housing Type Description Order no. Angle bracket · O1D, O4 · for type O1D, O4 · Housing materials: stainless steel 316L / 1.4404 E21120 Angle bracket · O4 · for type O4 · Housing materials: stainless steel 316L / 1.4404 E21117 Angle bracket · O5, O4 · for mounting O5, O4 sensors instead of OL sensors · Dovetail clamp · Housing materials: Dovetail clamp: AlMgSi0.5 / fixture: AlMg3 E21122 Dovetail clamp · for type DTS, O4, O5 · Housing materials: AlMgSi0.5 E21088 Mounting brackets Mounting on the back of the unit · O4 · for type O4 · Housing materials: stainless steel 316Ti / 1.4571 E21116 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 12 mm · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: diecast zinc E21215 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 12 mm · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: high-grade stainless steel E21216 Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: diecast zinc E21217 Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: high-grade stainless steel E21218 Mounting set · O4 · Clamp mounting · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: diecast zinc E21118 Mounting set · O4 · Clamp mounting · with protective cover · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: diecast zinc E21119 Mounting set · O4 · Clamp mounting · for type O4 · Housing materials: stainless steel 316L / 1.4404 / clamp: diecast zinc E21118 You can find wiring diagrams and scale drawings from page 233 231 Photoelectric sensors Accessories for system components Type Description clamp · Ø 10 mm; M8 · free-standing M8 · Housing materials: clamp: diecast zinc E20843 clamp · Ø 10 mm; M8 · free-standing M8 · Housing materials: clamp: stainless steel 316Ti / 1.4571 E20844 clamp · Ø 12 mm; M10 · free-standing M10 · Housing materials: clamp: diecast zinc E20716 clamp · Ø 12 mm · rod mounting Ø 12 mm · Housing materials: clamp: diecast zinc E20717 clamp · Ø 12 mm · rod mounting Ø 12 mm · Housing materials: clamp: stainless steel E21110 clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: diecast zinc E20796 mounting rod · Ø 10 / M8 · Length: 150 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21081 mounting rod · Ø 10 / M8 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E80310 mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938 mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940 Head cap screw · M8 x 40 mm · ISO 4762 (DIN 912) · free-standing M8 · Housing materials: screw: steel galvanised E21204 Head cap screw · M8 x 40 mm · ISO 4762 (DIN 912) · free-standing M8 · Housing materials: screw: high-grade stainless steel E21205 Head cap screw · M10 x 45 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: steel galvanised E21208 Head cap screw · M10 x 45 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: high-grade stainless steel E21209 Product selectors and further information can be found at: www.ifm.com 232 Order no. Infrared / red light sensors Type Description Order no. Head cap screw · M10 x 120 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: steel galvanised E21213 Head cap screw · M10 x 120 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: high-grade stainless steel E21214 Cube · M8 · aluminium profile · Housing materials: diecast zinc E20950 Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951 Protective bracket for free-standing and rod mounting · Ø 18 mm · Clamp mounting · Housing materials: stainless steel 316L / 1.4404 E21125 Protective bracket for free-standing and rod mounting · Ø 18 mm · with end stop · Mounting clamp · Clamp mounting · Housing materials: Mounting clamp: PC black / Angle bracket: stainless steel 316L / 1.4404 E21126 Wiring diagrams Core colours 4 8 BN brown BU blue BK black 4 WH white 3 12 1 1 2 L+ L1 L+ 4 L+ 2 n.c. 3 L N L 3 L 1 BN BU 5 9 13 L+ 1 L 2 L+ 1 L1 L+ 3 L+ 4 4 3 L 3 N L L 2 1 3 6 10 14 L+ BN L BU BN L1 L+ 1 L+ BU N L L+ 4 BK 3 L L 3 1 7 11 15 L+ 4 3 1 L BN L1 L+ L+ 1 4 L+ 4 2 n.c. BU N L 3 3 L L 233 Photoelectric sensors Wiring diagrams 16 18 20 BN BN L+ 22 1 L+ WH L+ 1 L1 L+ 2 N L 1 L1 L+ N L 4 BK BK BU WH: Teach L 17 2 2: Teach BU L 19 L 21 1 BN 3 L+ L+ 23 1 L+ 2 2 2 BK 4 BU 3 3 2: Teach L 3 L 4 L 24 27 3 BN BU L+ BK BU BK BN L 1 L+ L+ L L+ 2 2 4 4 1 3 L 25 L 28 3 1 L+ L+ BU 4 4 2 2 BU L L L L 26 29 1 BN BU L+ BK BU BK BN L 3 L+ L+ L L+ 2 2 4 4 1 3 L L Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 2 LED 5 85 74 70 55 17 54 M12 x1 4 M12 x1 M12 x1 40 4 LED Product selectors and further information can be found at: www.ifm.com 234 L+ BK BN 1 3 BN L+ BK 17 Infrared / red light sensors Scale drawings / drawing no. – CAD download: www.ifm.com 8 85 74 1 LED 55 54 M12 x1 M12 x1 M12 x1 17 4 3 x LED 44 34 31 6,5 21,4 M18 x1 3 17 4 24 1: with pot. 1: with pot. 4 9 44 34 31 27,5 1 72 61 59 50 44 4 24 M18 x1 M12 x1 M18 x1 M12 x1 LED 4 LED 4 x 90° 24 5 1: with pot. 60 49 47 40 80,4 60,4 58 M18 x1 M12 x1 10 35,6 4 24 M18 x1 LED 4 x 90° 4 6 1 1: LED 4 x 90° 78,5 76 64 53 5,2 11 M18 x1 LED 80,4 60,6 59 1 4 1 24 33,8 M18 x1 24 1: pushbutton 4 7 2 1: Programming buttons, 2: LED 4 x 90° 86 76 64 53 5,2 1 2 72 61 59 4 24 34 M18 x1 M12 x1 1 1: pushbutton 12 M18 x1 " 20UNF LED 24 4 LED 4 x 90° 24 235 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 18 13 72 61 59 1 72 61 59 34 M18 x1 M12 x1 M18 x1 M12 x1 44 4 4 LED 4 x 90° 24 LED 4 x 90° 24 1: Programming buttons 19 14 35,4 15,9 11,5 14,5 LEDs 18 3,3 38 M18 x1 52 24,1 34 59,3 70,1 4 16 8,2 M18 x1 24 M12 x1 24 M12 x1 LED 4 x 90° 20 15 35,4 15,9 11,5 52 24,1 LEDs 1 29 75 62 64 18 M18 x1 9,7 19 27 13,6 38 M18 x1 4 3,3 24 M12 x1 24 LED 4 x 90° M12 x1 1: setting pushbuttons 21 16 LED 68,6 3,2 15 6,4 20,6 25,1 M18 x1 5 4 LED 4 x 90° 2,9 24 17 22 LED 80,4 Product selectors and further information can be found at: www.ifm.com 15 3,2 6,4 4 24 5,7 20,6 25,1 5 M18 x1 44 LED 4 x 90° 3,9 7,6 61 59 236 12,5 9,6 3,9 7,6 49 47 40 2,9 12,5 9,6 Infrared / red light sensors Scale drawings / drawing no. – CAD download: www.ifm.com 28 23 LED 12,5 9,6 LED 24 5 36,5 43,5 8,2 11 1,8 5,3 19 35 15 3,2 5 7,2 20,6 25,1 3,9 7,6 2,9 3,5 8,5 24 M8x1 9 LED 15 11,6 4 9 14,1 29 LED 24 M3 9 25 LED 3,5 8,5 9 M8x1 9 14,1 26 20,3 2,7 15 11 1,8 5,3 19 35 5 9,5 19,5 36,5 43,5 26 20,3 2,7 LED 11,6 4 M3 LED 9 30 26 LED 1 9 1 LED 24 LED 11 7,6 45 3,1 3,2 35 26 20,3 2,7 8,2 6,5 15 3,1 8,8 M3 9 9 27 4 LED 9 1 26 20,3 2,7 7,8 15 LED 6,5 1: pushbutton M3 9 237 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 34 31 1 11 24 11 45 35 3 3,1 3,2 3,1 3,2 45 35 8,2 2 9,5 19,5 LED 24 1 LED LED 1 M8x1 3,1 8,8 3,1 8,8 M12 x1 9 48 9 4 1 4 LED 1 1: pushbutton LED 1: pushbutton, 2: Receiver, 3: Transmitter 32 35 1 1 LED 24 5 LED 1 LED 1 11 LED 11 7,6 16,6 3,1 3,2 45 35 36,5 43,5 1,8 5,3 19 35 8,2 24 3,5 8,5 M8x1 M8x1 3,1 8,8 9 4 9 11,6 4 LED 1 1 LED 1: pushbutton 1: pushbutton 33 36 11 45 35 3,1 3,2 3,1 8,8 M8x1 3,1 8,8 9 4 1 9 LED 4 1: pushbutton 1 1: pushbutton Product selectors and further information can be found at: www.ifm.com 238 LED 11 45 LED 24 3,1 3,2 35 7,6 16,6 1 LED 1 9,5 19,5 1 LED 24 1 LED Infrared / red light sensors Scale drawings / drawing no. – CAD download: www.ifm.com 40 1 1 LED LED 11 8,2 7,6 16,6 36,5 43,5 3,1 3,2 1,8 5,3 19 1 LED 1 24 12 11 5 35 LED 35 24 45 37 3,5 8,5 M8x1 M8x1 3,1 8,8 9 4 4 11,6 4 LED 1 1 LED 1: pushbutton 1: pushbutton 38 41 1 1 LED LED 24 12 1 11 8,2 9,5 19,5 36,5 43,5 35 19 5,3 1,8 1,8 5,3 19 35 1 LED 11 5 3,5 8,5 36,5 43,5 LED 24 M8x1 5 3,5 8,5 M8x1 9 4 4 11,6 11,6 4 LED 1 1 LED 1: pushbutton 1: pushbutton 39 42 1 1 24 12 LED 1 11 LED 1 11 45 7,6 16,6 24 12 3,1 3,2 35 3,1 3,2 35 8,2 LED 45 LED 3,1 8,8 3,1 8,8 4 4 4 4 LED 1 LED 1 1: pushbutton 1: pushbutton 239 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 46 43 1 24 12 LED 24 12 1 LED 11 11 7,6 16,6 35 19 5,3 1,8 3,1 3,2 45 9,5 19,5 35 2 3 1 36,5 43,5 LED 1 LED 5 3,5 8,5 3,1 8,8 M8x1 48 4 M12 x1 4 11,6 4 4 LED LED 1 24 12 1 1 1: pushbutton 1: pushbutton, 2: Receiver, 3: Transmitter 47 44 LED 45 36,5 43,5 19 5,3 1,8 11 35 11 9,5 19,5 35 1 LED 1 24 12 7,6 16,6 LED 1 LED 3,1 3,2 5 3,5 8,5 M8x1 3,1 8,8 M8x1 4 11,6 4 4 4 LED LED 1 1 1: pushbutton 48 1: pushbutton 45 46,8 6,4 LED 6 25 17 6 5x9 25 18,2 1 LED 1 11 5 1 M12 x1 3,1 3,2 9,5 19,5 35 12 45 24 56 70,3 1 LED M8x1 3,1 8,8 15,4 LED 4 4 LED 1 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 1: pushbutton Product selectors and further information can be found at: www.ifm.com 240 Infrared / red light sensors Scale drawings / drawing no. – CAD download: www.ifm.com 52 49 46,8 6,4 18,2 LED 46,8 6,4 5x9 6 17 25 5x9 6 6 25 1 2 56 56 70,3 5 1 1 LED 25 6 36,5 17 25 18,2 5 2 M12 x1 5 1 LED 15,4 24,3 30,5 15,4 LED 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 50 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 53 1 6 25 5 2 2 56 70,3 5 5x9 6 2 1 LED 25 6 25 2 46,8 6,4 18,2 56 70,3 6 5x9 25 19,5 37 18,2 LED 17 46,8 6,4 M12 x1 M12 x1 1 24,3 1 15,4 LED 1: with pot., 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 51 24,3 30,5 8 15,4 10 1 3 LED 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 54 LED 2 56 6 5x9 25 19,5 37 5 1 LED 6 6 25 1 56 1 46,8 6,4 18,2 17 6 5x9 25 18,2 25 46,8 6,4 2 5 5 5 LED LED 15,4 24,3 30,5 15,4 1 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 241 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 58 55 49 2 6 5,5 13 75 5 62 LED 10 6 25 1 27 56 70,3 6 2 LED 1 5x9 25 19,5 37 1 LED 18 46,8 6,4 18,2 M12 x1 50 8,6 LED 6 1 1: pushbutton 24,3 30,5 59 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 63,8 7,9 51,8 36 23,5 4,2 1 30 25 20 8,5 40 5 M12 x1 63 69 43,5 1 74,4 86,2 56 5x10 LED 8,5 21,1 27 40 15,4 LED 105 4 12 25 20 LED 29,5 5,3 13,5 M12 x1 33,3 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 1 21,1 60 35 55 62 63,8 8,5 40 1 74,4 86,2 1: Programming buttons 5x10 LED 8,5 7,9 40 27 21,1 LED 5,2 LED 57 1 1 LED 1 5 62 49 27 M12 x1 75 31 10 LED LED 1: pushbutton 8,6 50 29,5 6 5,5 LED 6 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. Product selectors and further information can be found at: www.ifm.com 242 Infrared / red light sensors Scale drawings / drawing no. – CAD download: www.ifm.com 61 63 63,8 63,8 5x10 7,9 8,5 40 74,4 5 1 5x10 8,5 1 LED 40 8,5 40 27 74,4 86,2 8,5 LED 40 50,9 21,1 7,9 21,1 27 5 1 M12 x1 1 5 LED 29,5 29,5 LED 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 62 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 64 1 LED 2 8,5 5x10 74,4 74,4 86,2 54,8 2 LED 40 7,9 8,5 8,5 40 27 21,2 8,5 40 25,3 63,8 5x10 40 63,8 7,9 27 5 1 M12 x1 1 5 5 1 8 1: with pot., 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 2 LED 29,5 38,3 44,5 10 1 3 29,5 38,6 LED 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm., 2: Programming buttons 243 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 65 67 63,8 63,8 27 8,5 8,5 40 8,5 40 1 1 74,4 86,2 5 23,5 1 5x10 LED 74,4 86,2 8,5 7,9 40 5x10 LED 40 21,2 7,9 21,2 27 M12 x1 5 1 M12 x1 2 2 LED 29,5 38,3 44,5 29,5 38,3 44,5 LED 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm., 2: Programming buttons 66 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm., 2: Programming buttons 68 63,8 63,8 5 19,7 1 5 5 2 LED LED 8,5 40 5 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm., 2: Programming buttons Product selectors and further information can be found at: www.ifm.com 244 1 29,5 38,3 44,5 29,5 38,3 44,5 2 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm., 2: Programming buttons 5x10 74,4 1 LED 8,5 8,5 40 74,4 8,5 7,9 23,5 1 27 5x10 40 LED 40 21,2 7,9 25,3 27 Infrared / red light sensors Scale drawings / drawing no. – CAD download: www.ifm.com 69 63,8 27 5x10 8,5 40 1 74,4 86,2 8,5 LED 40 25,3 7,9 5 19,7 1 M12 x1 2 29,5 38,3 44,5 LED 1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm., 2: Programming buttons 245 Photoelectric sensors Detection of minute objects. Clearly visible red light for easy setting to the object. Automatic switch point setting by pressing a pushbutton. Application sensors available for special application areas. System components available for fine adjustment. Laser sensors Laser sensors are used where detection of small objects or precise positioning is required. They are available as through-beam sensors, retro-reflective sensors or diffuse reflection sensors. Laser light consists of light waves of identical length which have a defined phase relation (coherence). This results in an important feature of laser systems, that is the almost parallel light beam. Result: Due to the small angle of divergence long ranges of up to 60 metres can be achieved. The laser spot which is also clearly visible at daylight simplifies the alignment of the system. Apart from the advantages some points have to be taken into account for the selection of the suitable optical system: Compared to standard sensors the laser sensors have a reduced temperature range (-10...60 °C). Life is limited to approx. 50,000 hours. Basically laser systems are more expensive than normal red light sensors. In view of the small light spot and the often high ranges the system is more sensitive to vibrations than standard sensors. 246 Coherent: Laser sensors emit light of a defined wave length and the same phase position. Laser sensors System overview Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1 Page 248 Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1 248 - 249 Rectangular OJ housing Laser PerformanceLine, front sensing face, laser class 1 249 - 250 Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2 250 - 251 Rectangular housing O5 Laser class 1 Prismatic reflector 251 251 - 252 Accessories OG housing 252 Accessories OJ housing 253 Accessories O1 housing 253 - 254 Accessories for system components 254 Wiring diagrams 254 Scale drawings / drawing no. – CAD download: www.ifm.com 255 247 Photoelectric sensors Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1 Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 65 / IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 2m red 5 – 1 1 OGS701 Transmitter 60 m red 312 – 1 1 OGS700 Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 65 / IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 2m red – H/D PNP 2 2 OGE701 Receiver 60 m red – H/D PNP 2 2 OGE700 Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 65 / IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.2...2 m red 5 H/D PNP 2 2 OGP701 Polarisation filter 0.2...15 m red 78 H/D PNP 2 2 OGP700 Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP 65 / IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 20...200 mm red 1.2 H/D PNP 2 2 OGH700 Wiring diagr. no. Drawing no. Order no. Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1 Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Transmitter 1m red <4 – 1 3 OJ5041 Receiver 1m red – H/D PNP 3 3 OJ5042 Transmitter 15 m red < 24 – 1 3 OJ5038 Product selectors and further information can be found at: www.ifm.com 248 Laser sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Receiver 15 m red – H/D PNP 3 3 OJ5039 Transmitter 1m red <4 – 1 4 OJ5141 Receiver 1m red – H/D PNP 3 4 OJ5142 Transmitter 15 m red < 24 – 1 4 OJ5138 Receiver 15 m red – H/D PNP 3 4 OJ5139 Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Polarisation filter 8m red < 12 H/D PNP 3 3 OJ5036 Polarisation filter 8m red < 12 H/D PNP 3 4 OJ5136 Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Background suppression 7...150 mm red 0.8 H/D PNP 3 5 OJ5058 Background suppression 15...200 mm red 2x1 H/D PNP 3 6 OJ5054 Background suppression 7...150 mm red 0.8 H/D PNP 3 7 OJ5158 Background suppression 15...200 mm red 2x1 H/D PNP 3 8 OJ5154 Wiring diagr. no. Drawing no. Order no. 1 9 OJ5019 Rectangular OJ housing Laser PerformanceLine, front sensing face, laser class 1 Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Transmitter 1m red <4 – You can find wiring diagrams and scale drawings from page 254 249 Photoelectric sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Through-beam sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Receiver 1m red – H/D PNP 3 9 OJ5020 Transmitter 15 m red < 24 – 1 9 OJ5016 Receiver 15 m red – H/D PNP 3 9 OJ5017 Transmitter 15 m red < 24 – 1 10 OJ5116 Receiver 15 m red – H/D PNP 3 10 OJ5117 Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Polarisation filter 8m red < 12 H/D PNP 3 9 OJ5014 Polarisation filter 8m red < 12 H/D PNP 3 10 OJ5114 Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Background suppression 7...150 mm red 0.8 H/D PNP 3 11 OJ5056 Background suppression 15...200 mm red 2x1 H/D PNP 3 12 OJ5052 Background suppression 15...200 mm red 2x1 H/D PNP 3 13 OJ5152 Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2 Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Optical distance sensor · M12 connector · 10...30 DC · metal · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 0.2...10 m – 6 normally open / closed programmable PNP Product selectors and further information can be found at: www.ifm.com 250 2 14 O1D101 Laser sensors Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Optical distance sensor · M12 connector · 10...30 DC · metal · IP 67 · Connector groups 9, 11, 107, 108, 135 Background suppression 0.2...10 m – 6 Type of light Spot Ø at max. range [mm] normally open / closed programmable NPN 4 14 O1D104 Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 15 O5S700 Rectangular housing O5 Laser class 1 Type Operating principle Range Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 11, 107, 108, 135 Transmitter 60 m red 150 – 1 Through-beam sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Receiver 60 m red – H/D PNP 2 16 O5E700 Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 15 m red 40 H/D PNP 2 17 O5P700 Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Background suppression 20...200 mm red 1.2 H/D PNP 2 18 O5H700 Prismatic reflector Type Description Order no. Prismatic reflector · Ø 10 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainless steel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS E20990 Prismatic reflector · Ø 15 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainless steel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS E20992 Prismatic reflector · Ø 19 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainless steel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS E20993 You can find wiring diagrams and scale drawings from page 254 251 Photoelectric sensors Type Description Order no. Prismatic reflector · 11 x 11 mm · rectangular · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainless steel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS E20991 Prismatic reflector · 14 x 23 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20989 Prismatic reflector · 30 x 20 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20994 Prismatic reflector · 50 x 10 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20988 Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials: plastics E20722 Accessories OG housing Type Description Fixture for mounting and fine adjustment of laser units · Ø 18.5 mm · Clamp mounting · rod or free-standing depending on the clamp · for type OG · Housing materials: stainless steel 316Ti / 1.4571 E20737 Fixture for mounting and fine adjustment of laser units · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: high-grade stainless steel E21220 Fixture for mounting and fine adjustment of laser units · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21219 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20720 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecast zinc / fixture: steel E20721 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: high-grade stainless steel / fixture: high-grade stainless steel E21206 Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: high-grade stainless steel / fixture: high-grade stainless steel E21207 Product selectors and further information can be found at: www.ifm.com 252 Order no. Laser sensors Accessories OJ housing Type Description Order no. Fixture for mounting and fine adjustment of laser units · for front lens · for type OJ · Housing materials: diecast zinc E20975 Fixture for mounting and fine adjustment of laser units · for side lens · for type OJ · Housing materials: diecast zinc E20976 Mounting set · OJ · for front lens · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E20970 Mounting set · OJ · for front lens · Clamp mounting · rod mounting · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E21221 Mounting set · OJ · for side lens · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21222 Mounting set · OJ · for side lens · Clamp mounting · rod mounting Ø 10 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel E20973 Mounting set · OJ · for side lens · rod mounting Ø 10 mm · Housing materials: clamp: diecast zinc / fixture: stainless steel 316Ti / 1.4571 E21095 Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974 Accessories O1 housing Type Description Order no. Prismatic reflector · 226 x 262 mm · rectangular · for type O1D · Housing materials: plastics E21159 Fixture for mounting and fine adjustment of laser units · O1D · Clamp mounting · rod or free-standing depending on the clamp · Housing materials: fixture: aluminium transparent anodised / plastics: POM / screws: stainless steel E1D100 Mounting set · E2D101 + E20938 + E20951 E21079 Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: PMMA transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel E21133 You can find wiring diagrams and scale drawings from page 254 253 Photoelectric sensors Type Description Order no. Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: glass transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel E21171 Accessories for system components Type Description Order no. mounting rod · Ø 10 / M8 · Length: 150 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21081 mounting rod · Ø 10 / M8 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E80310 mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938 mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940 Head cap screw · M8 x 40 mm · ISO 4762 (DIN 912) · free-standing M8 · Housing materials: screw: steel galvanised E21204 Head cap screw · M10 x 45 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: steel galvanised E21208 Head cap screw · M10 x 45 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: high-grade stainless steel E21209 Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951 Wiring diagrams 1 2 3 4 1 1 L+ 1 L+ L+ 1 2 4 L+ 4 4 3 L 3 L 2: Teach Product selectors and further information can be found at: www.ifm.com 254 3 3 L L Laser sensors Scale drawings / drawing no. – CAD download: www.ifm.com 5 1 72 61 59 1 LED 1 34 LED 11 3,1 3,2 4 LED 4 x 90° 45 35 9,5 15,5 M18 x1 M12 x1 24 24 M8x1 3,1 8,8 2 72 61 59 1 9 4 M18 x1 M12 x1 34 1 LED 4 LED 4 x 90° 24 1: pushbutton 1: Programming buttons 6 3 1 LED 1 11 9,5 19,5 LED 11 45 35 3,1 3,2 8,2 45 35 24 LED 24 1 LED 1 3,1 3,2 M8x1 3,1 8,8 M8x1 3,1 8,8 9 4 9 4 1 1 LED LED 1: pushbutton 1: pushbutton 7 1 LED 24 36,5 43,5 1,8 5,3 19 35 3,5 8,5 11 9,5 15,5 11 8,2 5 5 1 LED 1,8 5,3 19 LED 35 1 24 1 LED 3,5 8,5 36,5 43,5 4 M8x1 M8x1 9 4 11,6 9 11,6 4 1 LED 1 LED 1: pushbutton 1: pushbutton 255 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 11 8 1 LED 11 11 35 9,5 15,5 3,1 3,2 1,8 5,3 19 LED 1 24 12 9,5 19,5 36,5 43,5 5 35 1 LED 45 1 LED 24 3,5 8,5 M8x1 M8x1 3,1 8,8 9 4 4 11,6 4 LED 1 1 LED 1: pushbutton 1: pushbutton 9 12 1 24 12 1 11 LED 1 8,2 24 11 3,1 3,2 3,1 3,2 45 9,5 19,5 35 12 35 LED 45 LED 1 LED M8x1 3,1 8,8 M8x1 3,1 8,8 4 4 4 4 1 LED 1 LED 1: pushbutton 1: pushbutton 10 13 24 12 1 11 LED 19 5,3 1,8 5 3,5 8,5 1 M8x1 5 3,5 8,5 M8x1 4 4 11,6 4 11,6 4 LED 1 LED 1: pushbutton 1: pushbutton Product selectors and further information can be found at: www.ifm.com 256 1 LED 11 9,5 19,5 35 36,5 43,5 19 5,3 1,8 35 8,2 24 12 36,5 43,5 LED 1 LED 1 Laser sensors Scale drawings / drawing no. – CAD download: www.ifm.com 17 46,8 6,4 1 6 5x9 25 45 59 26 4,5 30 6 2 1 LED 6 18,2 45 25 42 30 2 56 70,3 14 5 M12x1 2 M12 x1 25 52 20 1 24,3 30,5 15,4 LED 1: 4-digit alphanumeric display, 2: Programming buttons 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 2 1 LED 6 5x9 25 19,5 37 5 46,8 6,4 18,2 1 5 2 56 70,3 6 25 18 56 70,3 6 5x9 25 26 1 LED 6 46,8 6,4 18,2 25 15 M12 x1 M12 x1 LED 15,4 1 16 46,8 6,4 6 6 25 5x9 5 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 2 56 70,3 2 1 LED 25 26 18,2 24,3 30,5 15,4 LED M12 x1 1 24,3 30,5 15,4 LED 257 Photoelectric sensors Non-contact distance detection at a high range. Analogue and switching outputs. Small light spot and exact background suppression. Compact and robust metal housing. Unbeatable price / performance ratio. Optical distance detection using PMD technology For collision avoidance, completeness check, level monitoring or as diffuse reflection sensor with an extraordinary range: The efector pmd distance sensors can be used in a wide range of applications. Depending on the type, the laser sensors precisely determine distances up to 10 m or up to 75 m when a reflector is used. The robust metal housing ensures operational reliability even under rough operating conditions. Operating principle The efector pmd laser sensors operate to the time-of-flight principle. The pmd sensor’s receiver element is a „System-on-Chip“ design. Both sensor element and electronics for signal evaluation are integrated on a single silicon chip called a Photonic Mixer Device (PMD). Advantage: This innovative ifm design offers high performance in a compact, industrially compatible housing – at a fraction of the price of conventional systems. The determined distance is indicated on the 4-digit display and provided via the scalable analogue output (4…20 mA). The user can program two switching outputs which switch when a certain distance is reached. Up to 50 measurements per second are possible (adjustable). The light spot diameter is 6 mm at a 10 m distance. This makes the sensor suitable for applications requiring exact background suppression. An outstanding feature of efector pmd is the extremely compact size of only 42 x 45 x 52 mm. 258 The efector pmd provides an analogue signal that is proportional to the objectto-sensor distance. Collision avoidance on an overhead conveyor: efector pmd monitors distances between products. Distance detection System overview Page Rectangular O1 housing for optical distance measurement, laser class 1 260 Rectangular O1 housing for optical distance measurement, laser class 2 260 Rectangular O1 housing for optical level measurement, laser class 2 260 Accessories 260 - 261 Wiring diagrams 261 Scale drawings / drawing no. – CAD download: www.ifm.com 261 259 Photoelectric sensors Rectangular O1 housing for optical distance measurement, laser class 1 Type Operating principle Range Sampling rate [Hz] Spot Ø at max. range [mm] Ub Wiring diagr. no. Drawing no. Order no. 1 1 O1D155 Wiring diagr. no. Drawing no. Order no. [V] Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 Optical distance sensor 0.3...6 m 1...33 6 18...30 Rectangular O1 housing for optical distance measurement, laser class 2 Type Operating principle Range Sampling rate [Hz] Spot Ø at max. range [mm] Ub [V] Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 Optical distance sensor 1...75 m 1...33 150 18...30 1 1 O1D106 Optical distance sensor 0.2...10 m 1...33 6 18...30 1 1 O1D105 Optical distance sensor 0.2...10 m 1...50 6 18...30 1 1 O1D100 Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 Optical distance sensor 0.2...10 m 1...50 6 18...30 2 1 O1D103 Ub Wiring diagr. no. Drawing no. Order no. 1 O1D300 Rectangular O1 housing for optical level measurement, laser class 2 Type Operating principle Range Sampling rate [Hz] Spot Ø at max. range [mm] [V] Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 Optical level sensor 0.2...10 m 1...33 6 18...30 1 Accessories Type Description Prismatic reflector · 226 x 262 mm · rectangular · for type O1D · Housing materials: plastics Product selectors and further information can be found at: www.ifm.com 260 Order no. E21159 Distance detection Type Description Order no. Fixture for mounting and fine adjustment of laser units · O1D · Clamp mounting · rod or free-standing depending on the clamp · Housing materials: fixture: aluminium transparent anodised / plastics: POM / screws: stainless steel E1D100 Mounting set · E2D101 + E20938 + E20951 E21079 Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: PMMA transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel E21133 Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: glass transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel E21171 Cooling box · Protective housing with an active cooling system for the O1D design · for type O1D · Housing materials: housing: aluminium transparent anodised / cover: aluminium black anodised / bezel: aluminium black anodised / window: float glass / cable gland: brass nickel-plated / nozzle: brass nickel-plated / sealing: FPM E21248 Cable · 10 m E12274 Wiring diagrams 1 2 1 1 L+ 2 4 2: Out 2 4: Out 1 3 L 3 L+ L+ 4 2 2 4 4 2: Out 2 4: Out 1 1 1 L+ 2 L 4: Out 1 2: Out 2 3 L 4: Out 1 2: Out 2 3 L Scale drawings / drawing no. – CAD download: www.ifm.com 1 42 30 6 30 45 59 4,5 45 1 M12x1 2 25 52 20 1: 4-digit alphanumeric display, 2: Programming buttons 261 Photoelectric sensors Easy connection of different fibre optics. Manual or automatic setting by means of “teach in”. LED display to check operation, switching status and function. Various fibre materials for different applications. Easy mounting, also on DIN rail possible. Fibre optics systems If there is only little mounting space for standard photoelectric sensors, fibre optics can be used. They are connected via fibre optic amplifiers which contain the control monitor and photoelectric components. There are two operating principles: Through-beam principle Transmitting and receiving fibre optics are laid separately. The two ends (fibre optic heads) are mounted opposite each other. The light beam interruption is evaluated according to the through-beam principle. Diffuse reflection principle Transmitting and receiving fibre optics are in one sheath and one sensing head. Evaluation is based on the diffuse reflection principle. Classification of the fibre optics Glass fibre optics Fibre optics made of silicate glass are more resistant to heat, ageing and chemicals than acrylic fibre optics. They do not change their optical response when they are bent. Glass fibre optics cannot be cut to length by the user. Minute objects up to 0.5 mm are detected safely. Acrylic fibre optics Acrylic fibre optics are suited for standard applications if no particular demands such as heat or chemical resistance are made. They can be cut to length and are less expensive than glass fibre optics. High-flex fibre optics If the minimum bending radius is not adhered to, the fibre is damaged. High-flex fibre optics allow extremely small bending radii. Three versions of fibre optic amplifiers are available Some versions of the OOF and OBF housings feature special functions: the function check output indicates a problem of the unit before it fails (short circuit on the output, internal fault, low excess gain). The pulse stretching function (delay time) allows the user to set a minimum pulse duration on the switching output. 262 Fibre optic systems can also be mounted in places where access is difficult. Fibre optics System overview Page OOF amplifiers for acrylic fibre optics 264 OBF amplifiers for acrylic fibre optics 264 Acrylic fibre optics for OBF / OOF housings, through-beam system 265 Acrylic fibre optics for OBF / OOF housings, through-beam system, highly flexible 265 - 266 Acrylic fibre optics for OBF / OOF housings, diffuse reflection system 266 - 267 Acrylic fibre optics for OBF / OOF housings, diffuse reflection system, highly flexible 267 Acrylic fibre optics for OBF / OOF housings, through-beam system, can be cut to length 267 Acrylic fibre optics for OBF / OOF housings, diffuse reflection system, can be cut to length 267 Acrylic fibres on a reel for OBF housing 268 OOF amplifiers for glass fibre optics 268 OKF amplifiers for glass fibre optics 268 - 269 OUF amplifiers for glass fibre optics 269 Glass fibre optics for OOF / OKF and OUF housings, through-beam system 269 - 270 Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system 270 - 271 Accessories 271 - 272 Wiring diagrams 273 Scale drawings / drawing no. – CAD download: www.ifm.com 274 263 Photoelectric sensors OOF amplifiers for acrylic fibre optics Type Number of input channels For fibre optics Type of light Sensing range through beam Sensing range diffuse Output H = light-on D = dark-on Ub Drawing no. Order no. 12...36 1 OO5000 H/D PNP 12...36 2 OO5001 H/D PNP 12...36 3 OO5002 [V] Type OOF · M12 connector · plastics · DC · Wiring diagram no. 1 · Connector groups 15, 17, 18 2 FE/FT-11 red 3.8 m 0...300 mm H/D PNP Type OOF · M12 connector · plastics · DC · Wiring diagram no. 5 · Connector groups 17, 18 4 FE/FT-11 red 3.8 m 0...300 mm Type OOF · M16 connector · plastics · DC · Wiring diagram no. 6 · Connector group 20 6 FE/FT-11 red 3.8 m 0...300 mm Type OOF · M16 connector · plastics · DC · Wiring diagram no. 7 · Connector group 20 8 FE/FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 4 OO5003 Sensing range through beam Sensing range diffuse Output H = light-on D = dark-on Ub Drawing no. Order no. 10...30 5 OBF500 OBF amplifiers for acrylic fibre optics Type Number of input channels For fibre optics Type of light [V] Type OBF · M12 connector · plastics · DC · Wiring diagram no. 8 · Connector groups 9, 10, 11, 107, 108, 110, 135 1 FE/FT-11 red 0...2 m 0...100 mm H/D PNP/NPN Type OBF · M8 connector · plastics · DC · Wiring diagram no. 8 · Connector groups 4, 5, 70 1 FE/FT-11 red 0...2 m 0...100 mm H/D PNP/NPN 10...30 6 OBF501 0...100 mm H/D PNP/NPN 10...30 7 OBF502 10...30 6 OBF503 Type OBF · Cable 2 m · plastics · DC · Wiring diagram no. 9 1 FE/FT-11 red 0...2 m Type OBF · M8 connector · plastics · DC · Wiring diagram no. 10 · Connector groups 1, 3 1 FE/FT-11 red 0...2 m 0...100 mm Product selectors and further information can be found at: www.ifm.com 264 H/D PNP/NPN Fibre optics Acrylic fibre optics for OBF / OOF housings, through-beam system Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] Ambient temperature Sheathing material Drawing no. Order no. [°C] FE-11 PMMA 60 / 130 / 160 aluminium -40...70 PE (polyethylene) 8 E20609 FE-11 PMMA 60 / 130 / 160 aluminium -40...70 PE (polyethylene) 9 E20612 FE-11 PMMA 150 / 210 / 800 aluminium -40...70 PE (polyethylene) 9 E20615 FE-11 PMMA 150 / 300 / 700 aluminium -40...70 PE (polyethylene) 10 E20757 FE-11 PMMA 200 / 350 / 800 aluminium -40...70 PE (polyethylene) 11 E20603 FE-11 PMMA 200 / 450 / 800 aluminium -40...70 PE (polyethylene) 9 E20606 FE-11 PMMA 400 / 900 / 1600 aluminium -40...70 PE (polyethylene) 12 E20753 FE-11 PMMA 1200 / 2000 / 3800 aluminium -40...70 PE (polyethylene) 13 E20752 FE-11 PMMA 60 / 130 / 160 stainless steel -40...70 PE (polyethylene) 14 E20751 FE-11 PMMA 140 / 230 / 400 stainless steel -40...70 PE (polyethylene) 15 E20714 FE-11 PMMA 200 / 450 / 800 stainless steel -40...70 PE (polyethylene) 16 E20750 FE-11 PMMA 20 / 20 / 20 PA -25...60 PE (polyethylene) 17 E20689 Sheathing material Drawing no. Order no. PE (polyethylene) 8 E21103 Acrylic fibre optics for OBF / OOF housings, through-beam system, highly flexible Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] FE-11 PMMA 50 / 56 / 120 Ambient temperature [°C] aluminium -40...60 You can find wiring diagrams and scale drawings from page 273 265 Photoelectric sensors Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] Ambient temperature Sheathing material Drawing no. Order no. [°C] FE-11 PMMA 50 / 56 / 120 aluminium -40...60 PE (polyethylene) 9 E21104 FE-11 PMMA 250 / 350 / 750 aluminium -40...60 PE (polyethylene) 18 E21101 FE-11 PMMA 250 / 350 / 750 aluminium -40...60 PE (polyethylene) 9 E21102 Sheathing material Drawing no. Order no. Acrylic fibre optics for OBF / OOF housings, diffuse reflection system Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] [°C] FT-11 PMMA 6 / 10 / aluminium -40...70 PE (polyethylene) 19 E20756 FT-11 PMMA 20 / 25 / 60 aluminium -40...70 PE (polyethylene) 20 E20639 FT-11 PMMA 20 / 25 / 60 aluminium -40...70 PE (polyethylene) 11 E20712 FT-11 PMMA 60 / 70 / 300 aluminium -40...70 PE (polyethylene) 21 E20645 FT-11 PMMA 60 / 90 / 300 aluminium -40...70 PE (polyethylene) 21 E20651 FT-11 PMMA 60 / 70 / 300 aluminium -40...70 PE (polyethylene) 22 E20648 FT-11 PMMA 60 / 90 / 300 aluminium -40...70 PE (polyethylene) 22 E20654 FT-11 PMMA 60 / 75 / 200 aluminium -40...70 PE (polyethylene) 23 E20758 FT-11 PMMA 70 / 100 / 300 aluminium -40...70 PE (polyethylene) 22 E20633 FT-11 PMMA 15 / 25 / 60 stainless steel -40...70 PE (polyethylene) 24 E20748 FT-11 PMMA 20 / 25 / 60 stainless steel -40...70 PE (polyethylene) 25 E20711 Product selectors and further information can be found at: www.ifm.com 266 Ambient temperature Fibre optics Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] Ambient temperature Sheathing material Drawing no. Order no. [°C] FT-11 PMMA 40 / 60 / 150 stainless steel -40...70 PE (polyethylene) 26 E20715 FT-11 PMMA 70 / 100 / 300 stainless steel -40...70 PE (polyethylene) 27 E20749 FE-11 PMMA – – -30...70 PE (polyethylene) 28 E20772 Acrylic fibre optics for OBF / OOF housings, diffuse reflection system, highly flexible Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] Ambient temperature Sheathing material Drawing no. Order no. [°C] FT-11 PMMA 10 / 10 / 30 aluminium -40...60 PE (polyethylene) 29 E21106 FT-11 PMMA 10 / 10 / 30 aluminium -40...60 PE (polyethylene) 18 E21107 FT-11 PMMA 70 / 104 / 180 aluminium -40...60 PE (polyethylene) 30 E21105 Acrylic fibre optics for OBF / OOF housings, through-beam system, can be cut to length Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] FE-11 PMMA 175 / 370 / 700 Ambient temperature Sheathing material Drawing no. Order no. – 31 E20767 [°C] aluminium -40...70 Acrylic fibre optics for OBF / OOF housings, diffuse reflection system, can be cut to length Type System Fibre optic material Range OB50.. / OBF5.. / OO50.. Sensing head material [mm] FT-11 PMMA 55 / 110 / 235 Ambient temperature Sheathing material Drawing no. Order no. – 32 E20765 [°C] aluminium -40...70 You can find wiring diagrams and scale drawings from page 273 267 Photoelectric sensors Acrylic fibres on a reel for OBF housing Type Description Order no. acrylic fibres on a reel · 20 m · for type OBF · Housing materials: PE (polyethylene), Fibre optic: PMMA, can be cut to length E20773 acrylic fibres on a reel · 50 m · for type OBF · Housing materials: PE (polyethylene), Fibre optic: PMMA, can be cut to length E20774 acrylic fibres on a reel · 20 m · for type OBF · Housing materials: PE (polyethylene), Fibre optic: PMMA, can be cut to length E20775 OOF amplifiers for glass fibre optics Type Number of input channels For fibre optics Type of light Sensing range through beam Sensing range diffuse Output H = light-on D = dark-on Ub Drawing no. Order no. 12...36 33 OO5004 H/D PNP 12...36 34 OO5005 H/D PNP 12...36 35 OO5006 [V] Type OOF · M12 connector · plastics · DC · Wiring diagram no. 1 · Connector groups 15, 17, 18 2 FE/FT-00 red 0.4 m 0...200 mm H/D PNP Type OOF · M12 connector · plastics · DC · Wiring diagram no. 5 · Connector groups 17, 18 4 FE/FT-00 red 0.4 m 0...200 mm Type OOF · M16 connector · plastics · DC · Wiring diagram no. 6 · Connector group 20 6 FE/FT-00 red 0.4 m 0...200 mm Type OOF · M16 connector · plastics · DC · Wiring diagram no. 7 · Connector group 20 8 FE/FT-00 red 0.4 m 0...200 mm H/D PNP 12...36 36 OO5007 Sensing range through beam Sensing range diffuse Output H = light-on D = dark-on Ub Drawing no. Order no. 37 OK5001 OKF amplifiers for glass fibre optics Type Number of input channels For fibre optics Type of light [V] Type OKF · Cable 2 m · plastics · DC · Wiring diagram no. 11 1 FE/FT-00 red 0...0.12 m 0...40 mm Product selectors and further information can be found at: www.ifm.com 268 H/D PNP 10...50 Fibre optics Type Number of input channels For fibre optics Type of light Sensing range through beam Sensing range diffuse Output H = light-on D = dark-on Ub Drawing no. Order no. [V] Type OKF · M12 connector · plastics · DC · Wiring diagram no. 12 · Connector groups 9, 10, 11, 107, 108, 110, 135 1 FE/FT-00 red 0...0.12 m 0...40 mm H/D PNP 10...50 38 OK5008 Sensing range through beam Sensing range diffuse Output H = light-on D = dark-on Ub Drawing no. Order no. OUF amplifiers for glass fibre optics Type Number of input channels For fibre optics Type of light [V] Type OUF · Cable 2 m · plastics · DC · Wiring diagram no. 2 1 FE/FT-00 infrared 0.12 m 40 mm H PNP 10...55 39 OU5001 1 FE/FT-00 infrared 0.12 m 40 mm D PNP 10...55 39 OU5002 Type OUF · M12 connector · plastics · DC · Wiring diagram no. 3 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 1 FE/FT-00 infrared 0...0.12 m 0...40 mm H PNP 10...50 40 OU5043 Type OUF · M12 connector · plastics · DC · Wiring diagram no. 4 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 1 FE/FT-00 infrared 0...0.12 m 0...40 mm D PNP 10...50 40 OU5044 Sheathing material Drawing no. Order no. Glass fibre optics for OOF / OKF and OUF housings, through-beam system Type System Fibre optic material Range OOF / OKF / OUF Sensing head material [mm] Ambient temperature [°C] FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 41 E20059 FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 42 E20060 FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 43 E20062 FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 44 E20228 You can find wiring diagrams and scale drawings from page 273 269 Photoelectric sensors Type System Fibre optic material Range OOF / OKF / OUF Sensing head material [mm] Ambient temperature Sheathing material Drawing no. Order no. [°C] FE-00 glass 160 / 50 / 50 stainless steel -20...80 PVC 45 E20061 FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 46 E20128 FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 47 E20130 FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 48 E20129 FE-00 glass 160 / 50 / 50 stainless steel -40...290 aluminium 49 E20127 FE-00 glass 160 / 50 / 50 stainless steel -20...150 metal silicone 50 E20506 FE-00 glass 400 / 120 / 120 stainless steel -20...150 metal silicone 51 E20505 FE-00 glass 400 / 120 / 120 stainless steel -20...150 metal silicone 52 E20492 FE-00 glass 400 / 120 / 120 stainless steel -20...150 metal silicone 53 E20493 Sheathing material Drawing no. Order no. Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system Type System Fibre optic material Range OOF / OKF / OUF Sensing head material [mm] [°C] FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 54 E20051 FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 55 E20052 FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 56 E20054 FT-00 glass 200 / 40 / 40 brass -20...80 PVC 57 E20249 FT-00 glass 24 / 6 / 6 stainless steel -20...80 PVC 58 E20230 Product selectors and further information can be found at: www.ifm.com 270 Ambient temperature Fibre optics Type System Fibre optic material Range OOF / OKF / OUF Sensing head material [mm] Ambient temperature Sheathing material Drawing no. Order no. [°C] FT-00 glass 24 / 8 / 8 stainless steel -20...80 PVC 45 E20053 FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 59 E20055 FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 60 E20056 FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 61 E20058 FT-00 glass 24 / 8 / 8 stainless steel -40...290 aluminium 49 E20057 FT-00 glass 24 / 8 / 8 stainless steel -20...150 metal silicone 50 E20507 FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 62 E20489 FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 63 E20494 FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 56 E20495 FT-00 glass - / 40 / 40 brass -20...80 – 64 E20078 FT-00 glass 200 / 40 / 40 stainless steel -25...80 – 65 E20215 Accessories Type Description Order no. Lens attachment · Ø 5 mm / M3 · for through-beam fibre optics · Housing materials: aluminium black anodised / glass · Pack quantity: 1 E20679 Lens attachment · Ø 6 mm / M4 · for through-beam fibre optics · Housing materials: aluminium black anodised / glass · Pack quantity: 1 E20680 Lens attachment · D5x10-M3-ALU · for through-beam fibre optics · M3 · Housing materials: aluminium black anodised · Pack quantity: 2 E20754 You can find wiring diagrams and scale drawings from page 273 271 Photoelectric sensors Type Description Lens attachment · D5x10-M4-ALU · for through-beam fibre optics · M4 · Housing materials: aluminium black anodised · Pack quantity: 2 E20755 Diaphragm attachment · D5x10-M3-ALU/D0.4 · for through-beam fibre optics · M3 · Housing materials: aluminium black anodised · Pack quantity: 2 E20762 Angle bracket · for type OBF · Housing materials: steel galvanised E20593 Angle bracket · OU · with mounting material · Housing materials: galvanised steel E20211 Mounting clamp · Ø 3 mm · for fibre optics · Housing materials: aluminium black anodised E20107 Mounting clamp · Ø 3.5 mm · for fibre optics · Housing materials: aluminium black anodised E20106 Mounting clamp · Ø 4.5 mm · for fibre optics · Housing materials: aluminium black anodised E20105 Mounting clamp · Ø 5 mm · for fibre optics · Housing materials: aluminium black anodised E20104 Mounting clamp · Ø 6 mm · for fibre optics · Housing materials: aluminium black anodised E20103 Mounting clamp · Ø 7 mm · for fibre optics · Housing materials: aluminium black anodised E20102 Mounting clamp · Ø 8 mm · Housing materials: aluminium black anodised E10221 Mounting clamp · Ø 10 mm · for fibre optics · Housing materials: PBT E20353 cutter for fibre optics · for type FE/FT-11 · Housing materials: plastics E20600 Product selectors and further information can be found at: www.ifm.com 272 Order no. Fibre optics Wiring diagrams Core colours 2 4 BK black BN brown BN BU blue BK VT lilac BU WH white 1 L+ L+ 2 3 L L 1 3 1 L+ 4 4: Out 1 2: Out 2 2 1 7 4 3 L+ 3 L L 5 9 1 L+ 4 BN 4: Out 1 2: Out 2 5: Out 3 6: Out 4 6 7 3 L+ BN BK VT VT BK BU L BU L+ L L 6 10 A L+ E E: Out 1 P: Out 2 S: Out 3 G: Out 4 C: Out 5 T: Out 6 T O L 1 L+ 4 3 1 L+ 4 L 3 L L 7 11 A L+ E J O L L E: Out 1 P: Out 2 S: Out 3 G: Out 4 C: Out 5 T: Out 6 N: Out 7 J: Out 8 BN WH BN BU BK WH 8 L+ BK L BU L+ L 12 1 L+ 1 L+ 1 2 2 4 2 3 3 3 L L+ 4 4 L 1 L+ 2 4 L 3 L 273 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 1 1: mounting on DIN rail 2 4 1: mounting on DIN rail 5 15 M12 x1 36 74 1 3,2 44 60 LED 2 1: mounting on DIN rail, 2: setting pushbuttons 6 1: mounting on DIN rail 15 M8x1 36 3 77 1 44 60 LED 2 1: mounting on DIN rail, 2: setting pushbuttons 1: mounting on DIN rail Product selectors and further information can be found at: www.ifm.com 274 3,2 Fibre optics Scale drawings / drawing no. – CAD download: www.ifm.com 12 7 15 72 1 M4 36 20 1 3,2 44 60 LED 1: glass lens 13 2 1: mounting on DIN rail, 2: setting pushbuttons 30 M6 8 1 M3 14,5 1: glass lens 14 M3 20 15 2,3 1,5 ~110 9 1 M4 15 1: bendable 15 10 2,9 35 30 20 12,3 5 1 3 4,3 3 1 3,4 6 16 1: Sensing surface M4 20 15 2,9 2 ~110 11 1 11 M3 18 1: bendable 275 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 22 17 47 17 22 35 30 20 70 M6 20 6,5 26 12,5 2 5 23 18 20 12,3 4,3 5 20 1 M3 12 3,4 6 1: Sensing surface 24 19 35 29 ~110 3 M4 17,5 20 15 2,9 1,6 3,4 23 1 1 1: bendable 1: Reference edge 25 20 3 20 16 M4 23 26 21 35 30 6 26 16 M4 1 6 1 3 Product selectors and further information can be found at: www.ifm.com 276 Fibre optics Scale drawings / drawing no. – CAD download: www.ifm.com 32 27 ~110 40 9 M8 14,5 4,6 2,7 M6 25 19 1 1: bendable 33 28 19,4 2,2 13,7 7 8,7 2,1 5,08 2x 2,2 10,1 11 13 6 9,4 29 23 M4 15 1: mounting on DIN rail 34 30 35 M6 23 31 1: mounting on DIN rail 5 M5 30 10,5 277 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 39 35 6 pot. LED 16 5 51 43 pot. 21 28 M11x1 4,3 3,5 9 4 LED 40 7 40 73 pot. LED M12 x1 9 4 28 M11x1 4,3 3,5 LED 16 5 51 43 pot. 21 40 7 1: mounting on DIN rail 41 15 M4 36 42 10 2,5 3,5 25 1: mounting on DIN rail 43 37 3 6 50 M11x1 19 2,5 14 4,3 4,1 9 30 10 5 5 pot. 15 LED 25 12,5 44 38 72 50 3 M11x1 19 5 LED 4,3 4,1 M12 x1 9 30 10 5 pot. 25 12,5 Product selectors and further information can be found at: www.ifm.com 278 2,5 14 Fibre optics Scale drawings / drawing no. – CAD download: www.ifm.com 51 45 25 20 M4 15 6 1 3 5 46 52 25 25 15 47 6 6 3 M4 10 53 3 25 6 6 16 3 10 3 14 48 54 3 6 M6 16 25 3 14 49 55 20 3 4,5 25 5 6 1 10 50 56 4 20 6 6 16 1 5 3 14 279 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 62 57 20 15 M6 7 25 11 10 15 2 45 2,5 58 63 25 1 7 6 3 3 10 15 59 64 35 26 25 M6 3 5 60 65 25 46 10 61 8 18 4 3 14 Product selectors and further information can be found at: www.ifm.com 280 M6 7 3 25 Fibre optics 281 Photoelectric sensors High-quality photoelectric sensors for different applications. Excellent price / performance ratio. Easy adjustment via teach buttons or potentiometer. Wide range of system components for easy and safe mounting. Detection of transparent objects Counting bottles and glasses or the reliable monitoring of film for tear can be performed without problem using specially designed retro-reflective sensors. ifm electronic offers a retro-reflective sensor with a small switching hysteresis, in particular for the detection of transparent objects. Due to the operating principle, retro-reflective sensors have the advantage that the light beam must pass the object to be detected twice, weakening the light sufficiently to detect a transparent object reliably. Precise adjustment is made by means of the teach buttons. Contrast sensor The O5 contrast sensor is specially suitable for detecting print marks and particularly flat objects. With its RGB transmitter LED the sensor detects even very small differences in contrast. During set-up it automatically selects the optimum transmitter colour from the colours red green blue (RGB) to ensure maximum energy difference of the reflected light. In addition, the teach method saves time and money. Pressing the teach buttons twice is enough for the sensor to be ready for operation. High-resolution colour sensor The new electronic colour sensor from ifm electronic detects the colour, packaging, label or imprint of objects at a high resolution. With the five selectable tolerance steps, the colour sensor perfectly differentiates even the finest shades of colour from the background or other objects. The unit is set to the colour to be detected by one push of the button. This saves time and money. Optical fork and angle sensors The optical fork and angle sensors are made from distortion-resistant diecast zinc and feature a high switching frequency. Applications are in particular part monitoring in feeding technology and handling systems. Further application examples are belt edge and double feed monitoring. Sensitivity setting using the potentiometer and setting of light-on / dark-on mode using the rotary switch are simple and time-saving. No complex adjustment is required because transmitter and receiver are already aligned towards each other. Due to the fine and precise red light beam which is constant across the entire fork width, out-of-balance monitoring of shafts can also be carried out. 282 Typical application for contrast sensors: Counting of glass bottles. The optical fork and angle sensors are especially used for part monitoring in feeding technology and handling systems. For specific systems System overview Page Sensors for the detection of transparent objects 284 Contrast sensors 284 Sensors for colour detection 285 Photoelectric sensors 285 Optical fork sensors 285 - 286 Laser fork sensors, laser class 2 286 Optical angle sensors 287 Prismatic reflector 287 Accessories O5 housing Accessories for system components 287 - 288 288 Wiring diagrams 288 - 289 Scale drawings / drawing no. – CAD download: www.ifm.com 289 - 292 283 Photoelectric sensors Sensors for the detection of transparent objects Type Operating principle Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. Retro-reflective sensor · PVC cable 0.15 m · 10...30 DC · plastics · IP 67 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 Polarisation filter 0.2...1.5 m red 64 H/D PNP 1 1 OJ5191 Polarisation filter 0.2...1.5 m red 64 H/D PNP 1 2 OJ5190 Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP 67 · Connector groups 4, 5, 70 Polarisation filter 0.2...1.5 m red 64 H/D PNP 2 3 OJ5085 Polarisation filter 0.2...1.5 m red 64 H/D PNP 2 4 OJ5086 Polarisation filter 0.2...1.5 m red 64 H/D PNP 2 5 OJ5186 Polarisation filter 0.2...1.5 m red 64 H/D NPN 3 5 OJ5189 Polarisation filter 0.2...1.5 m red 64 H/D PNP 2 6 OJ5185 Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 11, 13, 14, 107, 109, 110, 113, 115, 135, 137 Polarisation filter 0...1.5 m red 40 / 80 H/D PNP/NPN 7 7 O5G500 Range Type of light Spot Ø at max. range [mm] Output H = light-on D = dark-on Wiring diagr. no. Drawing no. Order no. 8 O5K500 Contrast sensors Type Operating principle M12 connector · 10...36 DC · plastics · IP 67 · Connector groups 11, 13, 14, 107, 109, 110, 113, 115, 135, 136, 137 Diffuse contrast sensor 18...22 mm red 1.5 x 5 Product selectors and further information can be found at: www.ifm.com 284 H/D PNP/NPN 8 For specific systems Sensors for colour detection Type Operating principle Measuring range Light spot diameter Ub Current consumption Sampling rate / switching frequency [mm] [V] [mA] [Hz] Drawing no. Order no. M12 connector · Output function light-on / dark-on programmable · DC PNP/NPN · Wiring diagram no. 4 · Connector groups 11, 13, 14, 107, 109, 110, 113, 115, 135, 137 Colour sensor 15...19 mm 2.5 x 6 10...36 50 2000 8 O5C500 Photoelectric sensors Type Dimensions Sensing range [mm] [mm] M12 connector · Output function Material Ub Protection [V] f Iload [Hz] [mA] Drawing no. Order no. · DC PNP · Wiring diagram no. 5 · Connector groups 107, 108, 110, 135 M12 / L = 63 50 f high-grade st. steel 10...30 IP 68 1600 100 9 JAC201 M12 / L = 63 50 f high-grade st. steel 10...30 IP 68 / IP 69K 1600 100 9 JAT201 f = flush / nf = non flush Optical fork sensors Type Fork width (w) Fork depth (d) [mm] [mm] Smallest detectable object Ø [mm] Switching frequency Output H = light-on D = dark-on [Hz] Ub Drawing no. Order no. 10 OPU200 [V] Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 9 · Connector groups 1, 2, 3, 68 10 17 0.3 10000 H/D PNP/NPN 10...35 Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 20 25 0.4 4000 H/D PNP 10...35 11 OPU201 30 35 0.5 4000 H/D PNP 10...35 12 OPU202 50 55 0.5 4000 H/D PNP 10...35 13 OPU203 80 55 0.5 4000 H/D PNP 10...35 14 OPU204 You can find wiring diagrams and scale drawings from page 288 285 Photoelectric sensors Type Fork width (w) Fork depth (d) [mm] [mm] Smallest detectable object Ø [mm] Switching frequency Output H = light-on D = dark-on [Hz] Ub Drawing no. Order no. 15 OPU205 [V] Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 120 60 0.8 2000 H/D PNP 10...35 Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 6 · Connector groups 1, 3, 68 20 25 0.4 4000 H/D NPN 10...35 11 OPU207 30 35 0.5 4000 H/D NPN 10...35 12 OPU208 50 55 0.5 4000 H/D NPN 10...35 13 OPU209 80 55 0.5 4000 H/D NPN 10...35 14 OPU210 120 60 0.8 2000 H/D NPN 10...35 15 OPU211 Smallest detectable object Ø [mm] Switching frequency Output H = light-on D = dark-on Ub Drawing no. Order no. Laser fork sensors, laser class 2 Type Fork width (w) Fork depth (d) [mm] [mm] [Hz] [V] Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 30 30 0.05 3000 H/D PNP 10...30 16 OPU700 50 50 0.05 3000 H/D PNP 10...30 17 OPU701 80 50 0.05 3000 H/D PNP 10...30 18 OPU702 Product selectors and further information can be found at: www.ifm.com 286 For specific systems Optical angle sensors Type Side length (x, y) Sensor width (z) [mm] [mm] Smallest detectable object Ø [mm] Switching frequency Output H = light-on D = dark-on [Hz] Ub Drawing no. Order no. [V] Optical angle sensor · Type OPL · M8 connector · metal · DC · Wiring diagram no. 1 · Connector groups 1, 2, 3, 68 50 60 0.5 4000 H/D PNP 10...35 19 OPL200 80 100 0.7 4000 H/D PNP 10...35 20 OPL201 Optical angle sensor · Type OPL · M8 connector · metal · DC · Wiring diagram no. 6 · Connector groups 1, 3, 68 50 60 0.5 4000 H/D NPN 10...35 19 OPL202 80 100 0.7 4000 H/D NPN 10...35 20 OPL203 Prismatic reflector Type Description Order no. Prismatic reflector · 50 x 50 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20744 Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials: plastics E20722 Accessories O5 housing Type Description Order no. Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21085 Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 12 mm · for type O5 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: high-grade stainless steel E21223 Mounting set · Clamp mounting · with protective cover · rod mounting Ø 12 mm · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21210 You can find wiring diagrams and scale drawings from page 288 287 Photoelectric sensors Type Description Order no. Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc E21211 Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: high-grade stainless steel E21212 Mounting brackets Mounting on the back of the unit · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21086 Dovetail clamp · for type DTS, O4, O5 · Housing materials: AlMgSi0.5 E21088 Accessories for system components Type Description Order no. mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938 mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940 Head cap screw · M10 x 120 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: steel galvanised E21213 Head cap screw · M10 x 120 mm · ISO 4762 (DIN 912) · free-standing M10 · Housing materials: screw: high-grade stainless steel E21214 Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951 Wiring diagrams 1 2 3 4 1 1 1 L+ 1 L+ 2 4 4 2 L+ 5 4 3 L 2: Teach 3 2: Teach L Product selectors and further information can be found at: www.ifm.com 288 2 4 3 L 3 L+ AT N.C. Out L For specific systems Wiring diagrams 5 6 1 1 L+ 4 L+ 4 3 3 L L 7 9 1 1 L+ L+ 2 2 1 5 5 4 n.c. n.c. 4 4 3 L+ 4 3 3 L 1 L+ 3 L L L 8 1 1 L+ 4 L+ 4 3 3 L L Scale drawings / drawing no. – CAD download: www.ifm.com 2 1 LED 24 12 11 1 11 35 19 5,3 1,8 36,5 1,8 5,3 19 35 8,2 5 5 3,5 8,5 3,5 8,5 48 4 11,6 4 11,6 4 1 1: pushbutton M12 x1 M12 x1 48 9 1 LED 1 LED 36,5 LED 8,2 1 24 LED LED 1 1: pushbutton 289 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 6 3 1 1 LED LED 24 12 11 8,2 11 1 LED 1 35 19 5,3 1,8 3,1 3,2 45 35 36,5 43,5 24 12 8,2 LED 5 3,5 8,5 M8x1 3,1 8,8 M8x1 4 4 4 11,6 4 LED 1 1 LED 1: pushbutton 1: pushbutton 7 4 46,8 6,4 6 25 56 70,3 2 2 5 3,1 3,2 45 35 8,2 11 5x9 6 37 LED 1 LED 24 19,5 1 1 LED 25 18,2 M12 x1 M8x1 3,1 8,8 1 15,4 4 1 24,3 30,5 LED 9 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. LED 1: pushbutton 8 5 46,8 6,4 6 5 2 36,5 43,5 1,8 5,3 19 35 2 25 11 56 70,3 LED 8,2 5 5x9 6 LED 24 1 25,9 38 1 1 LED 25 18,2 M12 x1 3,5 8,5 M8x1 1 9 1 24,3 30,5 11,6 15,4 LED 4 LED 1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm. 1: pushbutton Product selectors and further information can be found at: www.ifm.com 290 For specific systems Scale drawings / drawing no. – CAD download: www.ifm.com 14 9 4,5 M12 x1 M12 x1 5 4,3 10 10 12,5 4,5 63 52 43 4 LED 4 x 90° W = 80 17 10 10 D = 55 10 80 W=10 25 12,5 6 M8x1 12 20 30 4 4,3 10 4,5 4,5 4,5 M8x1 LED D = 17 10 1: potentiometer sensitivity, 2: output function switch 45 15 10 LED 5 10 20 12 22 12 4,3 12 22 1: output function switch , 2: potentiometer sensitivity 4,5 4,5 10 5 4,3 W = 120 11 52 62 22 37 12 20,5 D = 25 12 10 4,5 M8x1 LED M8x1 10 W= 20 10 12,5 LED 50 D = 60 10 1: potentiometer sensitivity, 2: output function switch 12 90 1: potentiometer sensitivity, 2: output function switch 16 5 10 15 17 25 35 D = 35 10 9,5 1: potentiometer sensitivity, 2: output function switch 13 15 M8x1 4,5 60 10 W = 30 12 20 30 LED D = 35 10 5 4,3 17,5 10 W = 30 10 M8x1 LED 4,5 9,5 4,3 12,5 4,5 4,5 60 17 5 4,3 1: potentiometer sensitivity, 2: output function switch 10 W = 50 17 25 35 LED M8x1 80 9,5 D = 55 10 4,5 17,5 12 20 30 W = 50 10 M8x1 LED 4,5 9,5 10 10 15 5 4,3 15 4,5 12,5 4,5 1: potentiometer sensitivity, 2: output function switch D = 55 10 80 1: potentiometer sensitivity, 2: output function switch 291 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 20 9,5 18 4,5 5 4,3 10 105 10 X = 80 0 22,5 M8x1 17 25 35 15 M8x1 D = 55 10 4,5 80 4,5 LED 4,3 10,5 72 80 1: potentiometer sensitivity, 2: output function switch 4,3 72 80 75 10 6,7 19 10 X =50 60 4,5 LED 4,3 4,5 42 50 17,5 25,5 35,5 22,5 M8x1 50 42 75 Z Y = 50 1: potentiometer sensitivity, 2: output function switch 10,5 1: potentiometer sensitivity, 2: output function switch Product selectors and further information can be found at: www.ifm.com 292 17,5 25,5 35,5 80 72 105 Z LED 9,5 Y = 80 10 W = 80 15 17,5 10 For specific systems 293 Photoelectric sensors Slim design with ranges up to 20 m for all protected areas. Type 2 and type 4 safety light curtains to IEC 61496. With SIL 2 & 3 to IEC 61508 and PL d & e to ISO 13849. Can be installed in L shape without dead band. Easy connection via the tried and tested M12 connector. Safety light curtains and light grids Safety light curtains and safety light grids are used where movements of machine parts represent a risk for people or goods. The difference of the systems is the different resolution of the beams. Depending on the risk, the protective function is classified into finger, hand or body protection as well as primary guarding. When the light beam is interrupted, the protective equipment ensures deactivation of the outputs. The machine is brought into the state defined as safe. Tested safety The safety light curtains and light grids from ifm electronic have been developed according to the current standards EN 61496, ISO 13849-1 and IEC 62061 and certified by TÜV. They meet the requirements of type 2 with SILcl 2 and PL d as well as type 4 with SILcl 3 and PL e. Slim design and long range The safety light curtains and safety light grids from ifm electronic are distinguished by the very slim design (28 x 30 mm) and long ranges up to 20 m. Finger, hand and body protection reliably ensure primary guarding or access prevention. ifm offers new safety light grids for applications with especially long ranges. The new housing of our OY9 is slightly bigger and offers a range up to 60 m. These light curtains are designed for protected area heights of 160 mm to 1510 mm in intervals of 150 mm. A resolution (detection capacity) of 14, 20, 30, 40, 50 or 90 mm can be selected. Light grids are offered with 2, 3 or 4 beams. Safety light grids are also available as active / passive system. 294 Safety light curtains can be used for finger or hand protection. Safe protection of bodies on a robot cell. Safety light curtains / light grids System overview Safety light curtains type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 6 m Page 296 Safety light curtains type 4, SIL 3, PL e, resolution 20 mm, protected area width up to 20 m 296 - 297 Safety light curtains type 4, SIL 3, PL e, resolution 30 mm, protected area width up to 12 m 297 - 298 Safety light curtains type 4, SIL 3, PL e, resolution 30 mm, protected area width up to 20 m 298 - 299 Safety light curtains type 4, SIL 3, PL e, resolution 40 mm, protected area width up to 12 m 299 Safety light curtains type 4, SIL 3, PL e, resolution 40 mm, protected area width up to 20 m 300 Safety light curtains type 4, SIL 3, PL e, resolution 50 mm, protected area width up to 12 m 300 - 301 Safety light curtains type 4, SIL 3, PL e, resolution 50 mm, protected area width up to 20 m 301 - 302 Safety light curtains type 4, SIL 3, PL e, resolution 90 mm, protected area width up to 12 m 302 Safety light curtains type 4, SIL 3, PL e, resolution 90 mm, protected area width up to 20 m 303 Safety light grids type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 12 m 303 Safety light grids type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 20 m 304 Safety light curtains type 2, SIL 2, PL d, resolution 30 mm, protected area width up to 12 m 304 - 305 Safety light curtains type 2, SIL 2, PL d, resolution 40 mm, protected area width up to 12 m 305 Safety light curtains type 2, SIL 2, PL d, resolution 50 mm, protected area width up to 12 m 306 Safety light curtains type 2, SIL 2, PL d, resolution 90 mm, protected area width up to 12 m 306 - 307 Safety light grids type 2, SIL 2, PL d, 2, 3, 4 beams, protected area width up to 12 m 307 Safety light curtains for hygienic and wet areas type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 5 m 307 Safety light curtains for hygienic and wet areas type 4, SIL 3, PL e, resolution 30 mm, protected area width up to 15 m 308 Safety light grids for hygienic and wet areas type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 15 m 308 - 309 Safety light curtains for hygienic and wet areas type 2, SIL 2, PL d, resolution 30 mm, protected area width up to 10 m 309 Safety light grids type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 60 m 310 Safety light grids with active / passive system type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 6 m 310 Safety light grids for hygienic and wet areas type 2, SIL 2, PL d, 2, 3, 4 beams, protected area width up to 10 m 310 Safety relays for safety light curtains 311 Accessories for safety light curtains 311 - 313 Bases for safety light curtains 313 Bases for safety light curtains with corner mirror 313 Accessories necessary for bases 313 Wiring diagrams 314 Scale drawings / drawing no. – CAD download: www.ifm.com 315 295 Photoelectric sensors Safety light curtains type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 6 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 14 160 0...3 / 1...6 4 24 1 OY001S 363 14 310 0...3 / 1...6 5.5 24 1 OY002S 513 14 460 0...3 / 1...6 7.5 24 1 OY003S 663 14 610 0...3 / 1...6 9 24 1 OY004S 813 14 760 0...3 / 1...6 11 24 1 OY005S 963 14 910 0...3 / 1...6 13 24 1 OY006S 1113 14 1060 0...3 / 1...6 14.5 24 1 OY007S 1263 14 1210 0...3 / 1...6 16.5 24 1 OY008S 1413 14 1360 0...3 / 1...6 18 24 1 OY009S 1563 14 1510 0...3 / 1...6 20 24 1 OY010S Safety light curtains type 4, SIL 3, PL e, resolution 20 mm, protected area width up to 20 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 20 160 0...10 / 3...20 4 24 1 OY221S 363 20 310 0...10 / 3...20 5.5 24 1 OY222S Product selectors and further information can be found at: www.ifm.com 296 Safety light curtains / light grids Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 513 20 460 0...10 / 3...20 7.5 24 1 OY223S 663 20 610 0...10 / 3...20 9 24 1 OY224S 813 20 760 0...10 / 3...20 11 24 1 OY225S 963 20 910 0...10 / 3...20 13 24 1 OY226S 1113 20 1060 0...10 / 3...20 14.5 24 1 OY227S 1263 20 1210 0...10 / 3...20 16.5 24 1 OY228S 1413 20 1360 0...10 / 3...20 18 24 1 OY229S 1563 20 1510 0...10 / 3...20 20 24 1 OY230S Safety light curtains type 4, SIL 3, PL e, resolution 30 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 30 160 0...4 / 3...12 4 24 2 OY041S 363 30 310 0...4 / 3...12 5.5 24 2 OY042S 513 30 460 0...4 / 3...12 7.5 24 2 OY043S 663 30 610 0...4 / 3...12 8.5 24 2 OY044S 813 30 760 0...4 / 3...12 10.5 24 2 OY045S You can find wiring diagrams and scale drawings from page 314 297 Photoelectric sensors Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 963 30 910 0...4 / 3...12 12 24 2 OY046S 1113 30 1060 0...4 / 3...12 14 24 2 OY047S 1263 30 1210 0...4 / 3...12 15.5 24 2 OY048S 1413 30 1360 0...4 / 3...12 17 24 2 OY049S 1563 30 1510 0...4 / 3...12 18.5 24 2 OY050S Safety light curtains type 4, SIL 3, PL e, resolution 30 mm, protected area width up to 20 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 30 160 0...10 / 3...20 3 24 1 OY241S 363 30 310 0...10 / 3...20 4 24 1 OY242S 513 30 460 0...10 / 3...20 5 24 1 OY243S 663 30 610 0...10 / 3...20 6 24 1 OY244S 813 30 760 0...10 / 3...20 6.5 24 1 OY245S 963 30 910 0...10 / 3...20 7.5 24 1 OY246S 1113 30 1060 0...10 / 3...20 8.5 24 1 OY247S 1263 30 1210 0...10 / 3...20 9.5 24 1 OY248S Product selectors and further information can be found at: www.ifm.com 298 Safety light curtains / light grids Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 1413 30 1360 0...10 / 3...20 10 24 1 OY249S 1563 30 1510 0...10 / 3...20 11 24 1 OY250S Safety light curtains type 4, SIL 3, PL e, resolution 40 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 40 160 0...4 / 3...12 3.5 24 2 OY061S 363 40 310 0...4 / 3...12 4.5 24 2 OY062S 513 40 460 0...4 / 3...12 5.5 24 2 OY063S 663 40 610 0...4 / 3...12 6.5 24 2 OY064S 813 40 760 0...4 / 3...12 7.5 24 2 OY065S 963 40 910 0...4 / 3...12 9 24 2 OY066S 1113 40 1060 0...4 / 3...12 10 24 2 OY067S 1263 40 1210 0...4 / 3...12 11 24 2 OY068S 1413 40 1360 0...4 / 3...12 12 24 2 OY069S 1563 40 1510 0...4 / 3...12 13 24 2 OY070S You can find wiring diagrams and scale drawings from page 314 299 Photoelectric sensors Safety light curtains type 4, SIL 3, PL e, resolution 40 mm, protected area width up to 20 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 40 160 0...10 / 3...20 3 24 1 OY261S 363 40 310 0...10 / 3...20 3.5 24 1 OY262S 513 40 460 0...10 / 3...20 4 24 1 OY263S 663 40 610 0...10 / 3...20 4.5 24 1 OY264S 813 40 760 0...10 / 3...20 5 24 1 OY265S 963 40 910 0...10 / 3...20 6 24 1 OY266S 1113 40 1060 0...10 / 3...20 6.5 24 1 OY267S 1263 40 1210 0...10 / 3...20 7 24 1 OY268S 1413 40 1360 0...10 / 3...20 7.5 24 1 OY269S 1563 40 1510 0...10 / 3...20 8 24 1 OY270S Safety light curtains type 4, SIL 3, PL e, resolution 50 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 363 50 310 0...4 / 3...12 4 24 2 OY082S 513 50 460 0...4 / 3...12 4.5 24 2 OY083S Product selectors and further information can be found at: www.ifm.com 300 Safety light curtains / light grids Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 663 50 610 0...4 / 3...12 5.5 24 2 OY084S 813 50 760 0...4 / 3...12 6.5 24 2 OY085S 963 50 910 0...4 / 3...12 7.5 24 2 OY086S 1113 50 1060 0...4 / 3...12 8.5 24 2 OY087S 1263 50 1210 0...4 / 3...12 9 24 2 OY088S 1413 50 1360 0...4 / 3...12 10 24 2 OY089S 1563 50 1510 0...4 / 3...12 11 24 2 OY090S Safety light curtains type 4, SIL 3, PL e, resolution 50 mm, protected area width up to 20 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 363 50 310 0...10 / 3...20 3 24 1 OY282S 513 50 460 0...10 / 3...20 3.5 24 1 OY283S 663 50 610 0...10 / 3...20 4 24 1 OY284S 813 50 760 0...10 / 3...20 4.5 24 1 OY285S 963 50 910 0...10 / 3...20 5 24 1 OY286S 1113 50 1060 0...10 / 3...20 5.5 24 1 OY287S You can find wiring diagrams and scale drawings from page 314 301 Photoelectric sensors Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 1263 50 1210 0...10 / 3...20 6 24 1 OY288S 1413 50 1360 0...10 / 3...20 6.5 24 1 OY289S 1563 50 1510 0...10 / 3...20 7 24 1 OY290S Safety light curtains type 4, SIL 3, PL e, resolution 90 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 663 90 610 0...4 / 3...12 4 24 2 OY104S 813 90 760 0...4 / 3...12 4.5 24 2 OY105S 963 90 910 0...4 / 3...12 5 24 2 OY106S 1113 90 1060 0...4 / 3...12 5.5 24 2 OY107S 1263 90 1210 0...4 / 3...12 5.5 24 2 OY108S 1413 90 1360 0...4 / 3...12 6 24 2 OY109S 1563 90 1510 0...4 / 3...12 6.5 24 2 OY110S Product selectors and further information can be found at: www.ifm.com 302 Safety light curtains / light grids Safety light curtains type 4, SIL 3, PL e, resolution 90 mm, protected area width up to 20 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 663 90 610 0...10 / 3...20 3 24 1 OY204S 813 90 760 0...10 / 3...20 3.5 24 1 OY205S 963 90 910 0...10 / 3...20 3.5 24 1 OY206S 1113 90 1060 0...10 / 3...20 3.5 24 1 OY207S 1263 90 1210 0...10 / 3...20 4 24 1 OY208S 1413 90 1360 0...10 / 3...20 4 24 1 OY209S 1563 90 1510 0...10 / 3...20 4.5 24 1 OY210S Safety light grids type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 12 m Type Dimensions Number of beams [mm] Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 L x 28 x 30 2 510 0...4 / 3...12 2.5 24 3 OY114S L x 28 x 30 3 810 0...4 / 3...12 3 24 3 OY115S L x 28 x 30 4 910 0...4 / 3...12 3 24 3 OY116S You can find wiring diagrams and scale drawings from page 314 303 Photoelectric sensors Safety light grids type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 20 m Type Dimensions Number of beams Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] [mm] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 L x 28 x 30 2 510 0...10 / 3...20 2.5 24 3 OY120S L x 28 x 30 3 810 0...10 / 3...20 2.5 24 3 OY121S L x 28 x 30 4 910 0...10 / 3...20 2.5 24 3 OY122S Safety light curtains type 2, SIL 2, PL d, resolution 30 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 30 160 0...4 / 3...12 4.5 24 2 OY031S 363 30 310 0...4 / 3...12 6 24 2 OY032S 513 30 460 0...4 / 3...12 8 24 2 OY033S 663 30 610 0...4 / 3...12 9.5 24 2 OY034S 813 30 760 0...4 / 3...12 11 24 2 OY035S 963 30 910 0...4 / 3...12 12.5 24 2 OY036S 1113 30 1060 0...4 / 3...12 14.5 24 2 OY037S 1263 30 1210 0...4 / 3...12 16 24 2 OY038S 1413 30 1360 0...4 / 3...12 17.5 24 2 OY039S Product selectors and further information can be found at: www.ifm.com 304 Safety light curtains / light grids Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] 0...4 / 3...12 19.5 24 Drawing no. Order no. 2 OY040S M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 1563 30 1510 Safety light curtains type 2, SIL 2, PL d, resolution 40 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 213 40 160 0...4 / 3...12 4 24 2 OY051S 363 40 310 0...4 / 3...12 5 24 2 OY052S 513 40 460 0...4 / 3...12 6 24 2 OY053S 663 40 610 0...4 / 3...12 7 24 2 OY054S 813 40 760 0...4 / 3...12 8 24 2 OY055S 963 40 910 0...4 / 3...12 9.5 24 2 OY056S 1113 40 1060 0...4 / 3...12 10.5 24 2 OY057S 1263 40 1210 0...4 / 3...12 11.5 24 2 OY058S 1413 40 1360 0...4 / 3...12 12.5 24 2 OY059S 1563 40 1510 0...4 / 3...12 13.5 24 2 OY060S You can find wiring diagrams and scale drawings from page 314 305 Photoelectric sensors Safety light curtains type 2, SIL 2, PL d, resolution 50 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 363 50 310 0...4 / 3...12 4.5 24 2 OY072S 513 50 460 0...4 / 3...12 5.5 24 2 OY073S 663 50 610 0...4 / 3...12 6 24 2 OY074S 813 50 760 0...4 / 3...12 7 24 2 OY075S 963 50 910 0...4 / 3...12 8 24 2 OY076S 1113 50 1060 0...4 / 3...12 9 24 2 OY077S 1263 50 1210 0...4 / 3...12 10 24 2 OY078S 1413 50 1360 0...4 / 3...12 10.5 24 2 OY079S 1563 50 1510 0...4 / 3...12 11.5 24 2 OY080S Safety light curtains type 2, SIL 2, PL d, resolution 90 mm, protected area width up to 12 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 663 90 610 0...4 / 3...12 4 24 2 OY094S 813 90 760 0...4 / 3...12 4.5 24 2 OY095S 963 90 910 0...4 / 3...12 5 24 2 OY096S Product selectors and further information can be found at: www.ifm.com 306 Safety light curtains / light grids Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 1113 90 1060 0...4 / 3...12 5.5 24 2 OY097S 1263 90 1210 0...4 / 3...12 6 24 2 OY098S 1413 90 1360 0...4 / 3...12 6.5 24 2 OY099S 1563 90 1510 0...4 / 3...12 7 24 2 OY100S Safety light grids type 2, SIL 2, PL d, 2, 3, 4 beams, protected area width up to 12 m Type Dimensions Number of beams Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] [mm] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 L x 28 x 30 2 510 0...4 / 3...12 3 24 3 OY111S L x 28 x 30 3 810 0...4 / 3...12 3.5 24 3 OY112S L x 28 x 30 4 910 0...4 / 3...12 3.5 24 3 OY113S Safety light curtains for hygienic and wet areas type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 5 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. Cable 15 m · Wiring diagram no. 3, 4 630 14 460 0...2 / 1...5 7.5 24 4 OY403S 930 14 760 0...2 / 1...5 11 24 4 OY405S 1230 14 1060 0...2 / 1...5 14.5 24 4 OY407S You can find wiring diagrams and scale drawings from page 314 307 Photoelectric sensors Safety light curtains for hygienic and wet areas type 4, SIL 3, PL e, resolution 30 mm, protected area width up to 15 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. Cable 15 m · Wiring diagram no. 3, 4 330 30 160 0...7 / 3...15 3 24 4 OY441S 480 30 310 0...7 / 3...15 4 24 4 OY442S 630 30 460 0...7 / 3...15 5 24 4 OY443S 780 30 610 0...7 / 3...15 6 24 4 OY444S 930 30 760 0...7 / 3...15 6.5 24 4 OY445S 1080 30 910 0...7 / 3...15 7.5 24 4 OY446S 1230 30 1060 0...7 / 3...15 8.5 24 4 OY447S 1380 30 1210 0...7 / 3...15 9.5 24 4 OY448S 1530 30 1360 0...7 / 3...15 10 24 4 OY449S 1680 30 1510 0...7 / 3...15 11 24 4 OY450S Safety light grids for hygienic and wet areas type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 15 m Type Dimensions Number of beams [mm] Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] Drawing no. Order no. Cable 15 m · Wiring diagram no. 3, 4 L x 70 x 50 2 510 0...7 / 3...15 2.5 24 5 OY421S L x 70 x 50 3 810 0...7 / 3...15 2.5 24 5 OY422S Product selectors and further information can be found at: www.ifm.com 308 Safety light curtains / light grids Type Dimensions Number of beams Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] 910 0...7 / 3...15 2.5 24 [mm] Drawing no. Order no. 5 OY423S Cable 15 m · Wiring diagram no. 3, 4 L x 70 x 50 4 Safety light curtains for hygienic and wet areas type 2, SIL 2, PL d, resolution 30 mm, protected area width up to 10 m Type Sensor length Resolution / detection capacity Protected area height Protected area width Response time Ub [mm] [mm] [mm] [m] [ms] [V] Drawing no. Order no. Cable 15 m · Wiring diagram no. 3, 4 330 30 160 0...3 / 2...10 4.5 24 6 OY431S 480 30 310 0...3 / 2...10 6 24 6 OY432S 630 30 460 0...3 / 2...10 8 24 6 OY433S 780 30 610 0...3 / 2...10 9.5 24 6 OY434S 930 30 760 0...3 / 2...10 11 24 6 OY435S 1080 30 910 0...3 / 2...10 12.5 24 6 OY436S 1230 30 1060 0...3 / 2...10 14.5 24 6 OY437S 1380 30 1210 0...3 / 2...10 16 24 6 OY438S 1530 30 1360 0...3 / 2...10 17.5 24 6 OY439S 1680 30 1510 0...3 / 2...10 19.5 24 6 OY440S You can find wiring diagrams and scale drawings from page 314 309 Photoelectric sensors Safety light grids type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 60 m Type Dimensions Number of beams [mm] Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] Drawing no. Order no. M12 connector · Wiring diagram no. 1, 2 · Connector groups 17, 18 L x 50 x 60 2 510 8...30 / 18...60 7 24 7 OY951S L x 50 x 60 3 810 8...30 / 18...60 7 24 7 OY952S L x 50 x 60 4 910 8...30 / 18...60 7 24 7 OY953S Drawing no. Order no. Safety light grids with active / passive system type 4, SIL 3, PL e, 2, 3, 4 beams, protected area width up to 6 m Type Dimensions Number of beams [mm] Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] M12 connector · Wiring diagram no. 2 · Connector groups 17, 18 L x 50 x 60 2 510 0...6 / 0...6 10 24 8 OY901S L x 50 x 60 3 810 0...6 / 0...6 10.5 24 8 OY902S L x 50 x 60 4 910 0...6 / 0...6 10.5 24 8 OY903S Drawing no. Order no. Safety light grids for hygienic and wet areas type 2, SIL 2, PL d, 2, 3, 4 beams, protected area width up to 10 m Type Dimensions Number of beams [mm] Protected area height Protected area width Response time Ub [mm] [m] [ms] [V] Cable 15 m · Wiring diagram no. 3, 4 L x 70 x 50 2 510 0...3 / 2...10 3 24 9 OY411S L x 70 x 50 3 810 0...3 / 2...10 3.5 24 9 OY412S L x 70 x 50 4 910 0...3 / 2...10 3.5 24 9 OY413S Product selectors and further information can be found at: www.ifm.com 310 Safety light curtains / light grids Safety relays for safety light curtains Type Description Drawing no. Order no. Safety relay · Muting relay · Housing for DIN rail mounting · For the connection of safety light curtains / safety light grids with OSSD · Safety category type 4 to IEC 61496 · for industrial applications · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 10 G2001S Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · PA · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 · EN 574: type IIIC 11 G1501S Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · PA · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 · EN 574: type IIIC 12 G1503S Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · PA · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 · EN 574: type IIIC 13 G1502S Accessories for safety light curtains Type Description Order no. Corner mirror · Length: 250 mm · for safety light curtains · Protected area height · 160 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1001 Corner mirror · Length: 400 mm · for safety light curtains · Protected area height · 310 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1002 Corner mirror · Length: 540 mm · for safety light curtains · Protected area height · 460 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1003 Corner mirror · Length: 715 mm · for safety light curtains · Protected area height · 610 mm · for safety light grids · 2 beams · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1004 Corner mirror · Length: 885 mm · for safety light curtains · Protected area height · 760 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1005 Corner mirror · Length: 1060 mm · for safety light curtains · Protected area height · 910 mm · for safety light grids · 3 beams · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1006 Corner mirror · Length: 1230 mm · for safety light curtains · Protected area height · 1060 mm · for safety light grids · 4 beams · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1007 Corner mirror · Length: 1400 mm · for safety light curtains · Protected area height · 1210 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1008 Corner mirror · Length: 1450 mm · for safety light curtains · Protected area height · 1360 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1009 You can find wiring diagrams and scale drawings from page 314 311 Photoelectric sensors Type Description Corner mirror · Length: 1600 mm · for safety light curtains · Protected area height · 1510 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised EY1010 Vibration damper · for type OY · Housing materials: rubber / metal galvanised · Pack quantity: 4 EY3001 Vibration damper · for type OY · Housing materials: rubber / metal galvanised · Pack quantity: 6 EY3002 Rotatable brackets · axial ± 90° · for type OY · Housing materials: Angle bracket: steel black · Pack quantity: 4 EY3011 Adjustable brackets · axial ± 7° · for type OY · Housing materials: metal galvanised · Pack quantity: 4 EY3004 Adjustable brackets · axial ± 7° · for type OY · Housing materials: metal galvanised · Pack quantity: 6 EY3005 Test rod · Ø 14 mm · Probe length: 150 mm · for safety light curtains · for type OY · Housing materials: aluminium EY3006 Test rod · Ø 20 mm · Probe length: 150 mm · for safety light curtains · for type OY · Housing materials: aluminium EY3007 Test rod · Ø 30 mm · Probe length: 150 mm · for safety light curtains · for type OY · Housing materials: aluminium EY3008 Test rod · Ø 40 mm · Probe length: 150 mm · for safety light curtains · for type OY · Housing materials: aluminium EY3009 Test rod · Ø 50 mm · Probe length: 150 mm · for safety light curtains · for type OY · Housing materials: aluminium EY3010 Adapter cable · straight · For the connection of safety light curtains / safety light grids with OSSD · Configured for automatic operation · Free from silicone · Free from halogen · gold-plated contacts · 0.1 m · Housing materials: TPU orange / PA EY3090 Adapter cable · straight · For the connection of safety light curtains / safety light grids with OSSD · Configured for „long range„ · Free from silicone · Free from halogen · gold-plated contacts · 0.1 m · Housing materials: TPU orange / PA EY3091 Adapter cable · straight · For the connection of safety light curtains / safety light grids with OSSD · Configured for „short range„ · Free from silicone · Free from halogen · gold-plated contacts · 0.1 m · Housing materials: TPU orange / PA EY3092 Laser adjustment aid · for type OY9xxS · for safety light grids · Housing materials: plastics EY3098 Product selectors and further information can be found at: www.ifm.com 312 Order no. Safety light curtains / light grids Type Description Laser adjustment aid · for safety light curtains · for type OY · Housing materials: plastics Order no. EY3099 Bases for safety light curtains Type Description Order no. Base · Length: 1010 mm · for safety light grids · 2 beams · for safety light curtains · ≤ 760 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY2001 Base · Length: 1340 mm · for safety light grids · 3 beams · 4 beams · for safety light curtains · ≤ 1060 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY2002 Base · Length: 1680 mm · for safety light curtains · ≤1360 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY2003 Base · Length: 1980 mm · for safety light curtains · ≤ 1510 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY2004 Bases for safety light curtains with corner mirror Type Description Order no. Corner mirror with base · Length: 1010 mm · for safety light grids · 2 beams · for safety light curtains · ≤ 760 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY1011 Corner mirror with base · Length: 1340 mm · for safety light grids · 3 beams · 4 beams · for safety light curtains · ≤ 1060 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY1013 Corner mirror with base · Length: 1680 mm · for safety light curtains · ≤1360 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY1014 Corner mirror with base · Length: 1980 mm · for safety light curtains · ≤ 1510 mm · for type OY · Housing materials: aluminium epoxy-powder coated / plastics · Pack quantity: 1 EY1015 Accessories necessary for bases Type Description Mounting base · for type OY · Pack quantity: 1 Order no. EY2005 You can find wiring diagrams and scale drawings from page 314 313 Photoelectric sensors Wiring diagrams Core colours 2 BK black BN brown 1 BU blue 2 GN green GY grey 5 PK pink 6 RD red 7 VT lilac WH white YE yellow 3 4 OSSD1 L+ OSSD2 K1/K2/Restart SEL_A SEL_B L 8 1 1 2 3 4 L+ Range 0 L Range 1 5 3 4 BN BN BU WH GN YE RD PK L+ BU L WH Range 0 GN GY Range 1 PK 0 V DC YE 24 V AC/DC BK n.c. VT GY RD 1: Heating 1: Heating Product selectors and further information can be found at: www.ifm.com 314 L+ L OSSD1 OSSD2 SEL_A SEL_B K1/K2/Restart 0 V DC 24 V AC/DC Safety light curtains / light grids Scale drawings / drawing no. – CAD download: www.ifm.com 1 3 14,5 14,5 40 20 40 20 M5 51 M5 10 R 10 T R 11 T 1,5 1,5 40 20 10 29,5 10 29,5 40 20 102 61,5 5,5 5,5 L 10 L 10 10,5 28 M12x1 10,5 28 M12x1 3 30 28 10 3 30 28 10 28 28 T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green) T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green) 4 2 14,5 60 40 20 M5 10 R T R 11 T 1,5 10 29,5 40 20 L 61,5 5,5 L 10 10,5 28 M12x1 3 30 28 131 10 28 T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED (yellow), 3: LED 2 colours (red/green) 20 9 20 50 56 T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green) 315 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 6 5 R R 60 T 131 171 L L 100 T 20 20 20 9 9 20 50 56 T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green) 50 56 T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green) Product selectors and further information can be found at: www.ifm.com 316 Safety light curtains / light grids Scale drawings / drawing no. – CAD download: www.ifm.com 7 8 T R M12x1 M12x1 P 13 13 114 114 L L 122 122 A 5 5,7 60 5 60 M12x1 50 10,5 5,7 50 10,5 10,5 50 30 50 30 50 30 50 30 M6 6,5 3 M6 10,5 6,5 3 50 50 11,8 25 13,5 11,8 25 13,5 T: Transmitter, R: Receiver, 1: LED (red), 2: LED (green), 3: LED (yellow), 4: LED (orange), 5: LED (red), 6: LED (green), 7: LED (yellow), 8: LED (yellow), 9: LED (yellow), 10: display, 11: LED (orange) A: active element, P: passive element, 1: LED (orange), 2: LED (red), 3: LED (green), 4: LED (yellow), 5: display 317 Photoelectric sensors Scale drawings / drawing no. – CAD download: www.ifm.com 11 9 105 25 R 100 35,5 100 T L LED 1: Combicon connector with screw terminals, 2: mounting on DIN rail 171 12 105 100 35,5 25 LED 20 9 20 1: Combicon connector with screw terminals, 2: mounting on DIN rail 13 50 56 50 105 10 114,5 99 35 LED 1: Rotary switch for switch-off delay, 2: Combicon connector with screw terminals, 3: mounting on DIN rail Product selectors and further information can be found at: www.ifm.com 318 35,5 114 T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green) Safety light curtains / light grids 319 Object recognition 2D vision sensor for object recognition. 3D sensor for assessment of distance, level or volume. 3D camera for spatial detection of scenes and objects. Illumination units with high luminous power. Tough, industrial housings. 2D vision sensor for object recognition In automation technology visions sensors are an integral part of assembly and manufacturing tasks as well as quality control and thus increase efficiency. They are cameras with application-specific evaluation, i.e. reliable electronic eyes at a low cost and a high degree of integration. In a robust, industrially compatible housing they combine lighting, lens, camera chip, evaluation and process connections for the integration in the higher-level controller. The application possibilities of efector dualis range from presence, position and orientation monitoring, via sorting and counting tasks to quality control. 3D sensor for assessment of distance, level or volume efector pmd 3d is the first industrial 3D sensor that can assess objects in three dimensions at a glance. Special feature: The time-of-flight measurement and evaluation are integrated on one chip. Each pixel of this chip matrix evaluates its distance to the object. The image of the object on the chip matrix and the respective distance values correspond to a 3D image. This technology enables the detailed assessment of the object’s or scene’s conditions by means of volume, distance or level detection in three dimensions. Typical applications are completeness checks and level monitoring in the food industry as well as presence and dimension monitoring in conveying. 3D camera for detection in three dimensions of scenes and objects The pmd 3d camera detects scenes and objects in their spatial dimensions at a glance. In contrast to laser scanners it does not require moving components and is thus robust and wear-free. The operating principle is the same as for the 3D sensor. Besides the 3D distance image the camera provides a grey image of the scene. The combination of these images offers integrators the possibility to freely program application-specific tasks by means of a software development kit. This results in low-cost application solutions in the areas of packaging, storage and materials handling, airport logistics, collision avoidance, robotics, monitoring of space and persons. 320 Set-up in just a few steps: The professional and easy menu guidance allows configuration of the efector dualis to your application in just six operating steps. Object recognition System overview Page Object inspection sensors 322 Sensors for object recognition with PNP output function 322 Sensors for object recognition with NPN output function 322 Illumination units, backlight 323 Illumination units, spotlight 324 Software for 2D sensors 324 Panel PC for vision sensors 324 Fixing components for 2D sensors 324 - 326 Reflective tapes, diffusers and protective panes for 2D sensors 326 Sensors for 3D object recognition 326 Software for 3D sensors 327 Panel PC for vision sensors 327 Fixing components for 3D sensors 327 Connection cables for 2D and 3D sensors 328 - 329 Wiring diagrams 329 Scale drawings / drawing no. – CAD download: www.ifm.com 329 321 Object recognition Object inspection sensors Type Operating principle Max. field of view size Resolution [mm] Detection rate Type of light [Hz] Ambient temperature Drawing no. Order no. [°C] Type O2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 17, 18 CMOS image sensor B/W, VGA resolution 640 x 480 640 x 480 0.1 10 white light -10...60 1 O2V100 CMOS image sensor B/W, VGA resolution 640 x 480 1280 x 960 0.3 10 white light -10...60 1 O2V102 CMOS image sensor B/W, VGA resolution 640 x 480 400 x 300 0.08 10 white light -10...60 2 O2V104 Type of light Ambient temperature Drawing no. Order no. Sensors for object recognition with PNP output function Type Operating principle Max. field of view size Resolution [mm] Detection rate [Hz] [°C] Type O2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 17, 18 CMOS image sensor B/W, VGA resolution 640 x 480 400 x 300 0.08 10 infrared -10...60 2 O2D224 CMOS image sensor B/W, VGA resolution 640 x 480 640 x 480 0.1 10 infrared -10...60 1 O2D220 CMOS image sensor B/W, VGA resolution 640 x 480 1280 x 960 0.3 10 infrared -10...60 1 O2D222 Type of light Ambient temperature Drawing no. Order no. Sensors for object recognition with NPN output function Type Operating principle Max. field of view size Resolution [mm] Detection rate [Hz] [°C] Type O2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 17, 18 CMOS image sensor B/W, VGA resolution 640 x 480 400 x 300 0.08 10 infrared -10...60 2 O2D225 CMOS image sensor B/W, VGA resolution 640 x 480 640 x 480 0.1 10 infrared -10...60 1 O2D227 CMOS image sensor B/W, VGA resolution 640 x 480 1280 x 960 0.3 10 infrared -10...60 1 O2D229 Product selectors and further information can be found at: www.ifm.com 322 Object recognition Illumination units, backlight Type Dimensions Type of light [mm] Active illuminated area [mm] I0 normal light intensity [mA] I0 high light intensity [mA] Trigger Drawing no. Order no. PUR cable 2 m · metal · DC · Wiring diagram no. 1 66.5 x 33.4 x 9.2 red 25 x 25 50 25 External; 24 V PNP to IEC61131-1 3 O2D900 66.5 x 33.4 x 9.2 infrared 25 x 25 50 25 External; 24 V PNP to IEC61131-1 3 O2D901 103 x 81 x 9.2 red 50 x 50 200 100 External; 24 V PNP to IEC61131-1 4 O2D902 103 x 81 x 9.2 infrared 50 x 50 200 100 External; 24 V PNP to IEC61131-1 4 O2D903 156 x 133 x 9.2 red 100 x 100 450 250 External; 24 V PNP to IEC61131-1 5 O2D904 156 x 133 x 9.2 infrared 100 x 100 450 250 External; 24 V PNP to IEC61131-1 5 O2D905 PUR cable 0.15 m · metal · DC · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 66.5 x 33.4 x 9.2 red 25 x 25 50 25 External; 24 V PNP to IEC61131-1 3 O2D910 66.5 x 33.4 x 9.2 infrared 25 x 25 50 25 External; 24 V PNP to IEC61131-1 3 O2D906 103 x 81 x 9.2 red 50 x 50 200 100 External; 24 V PNP to IEC61131-1 4 O2D911 103 x 81 x 9.2 infrared 50 x 50 200 100 External; 24 V PNP to IEC61131-1 4 O2D907 156 x 133 x 9.2 red 100 x 100 450 250 External; 24 V PNP to IEC61131-1 5 O2D912 156 x 133 x 9.2 infrared 100 x 100 450 250 External; 24 V PNP to IEC61131-1 5 O2D908 You can find wiring diagrams and scale drawings from page 329 323 Object recognition Illumination units, spotlight Type Dimensions Type of light [mm] Active illuminated area [mm] I0 normal light intensity [mA] I0 high light intensity [mA] Trigger Drawing no. Order no. 6 O2D909 M12 connector · metal · DC · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 42 x 42 x 31 red – 180 90 External; 24 V PNP to IEC61131-1 Software for 2D sensors Type Description Operating software · O2D Order no. E2D200 Panel PC for vision sensors Type Description Order no. Touch Panel PC · AFL-12A-ATOM-N270/WT-R/1GB-R20 · 12.1„ colour display · Intel Atom CPU 1.6 GHz · 1 GByte RAM · Windows XP Embedded E2D400 Mounting bracket · for Touch Panel PC · for wall mounting · VESA standard 100 x 100 mm · Housing materials: fixture: metal E2D401 Mounting set · for Touch Panel PC · for control cabinet mounting · Housing materials: fixture: metal / End cap: plastics E2D402 Fixing components for 2D sensors Type Description Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 12 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D110 Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D112 Mounting set · Backlight 25 x 25 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-grade stainless steel E2D107 Product selectors and further information can be found at: www.ifm.com 324 Order no. Object recognition Type Description Order no. Mounting set · Backlight 50 x 50 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-grade stainless steel E2D108 Mounting set · Backlight 100 x 100 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-grade stainless steel E2D109 clamp · Ø 12 mm · rod mounting Ø 12 mm · Housing materials: clamp: stainless steel E21110 clamp · Ø 14 mm · rod mounting Ø 14 mm · Housing materials: clamp: stainless steel E21109 clamp · Ø 12 mm; M10 · free-standing M10 · Housing materials: clamp: stainless steel E20946 clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: stainless steel E20948 mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938 mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940 mounting rod · Ø 12 · Length: 150 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21111 mounting rod · Ø 12 · Length: 200 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21112 mounting rod · Ø 12 · Length: 300 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21113 mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939 mounting rod · Ø 14 / M12 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20941 Connection piece · Ø 20 mm · for the connection of two clamps with Ø 20 mm · Housing materials: stainless steel 316L / 1.4404 E21076 You can find wiring diagrams and scale drawings from page 329 325 Object recognition Type Description Order no. Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951 Cube · M12 · aluminium profile · Housing materials: diecast zinc E20952 Reflective tapes, diffusers and protective panes for 2D sensors Type Description Order no. Reflective tape · TS-03 · 100 x 100 mm · Housing materials: plastics E2D106 Plastic diffuser · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21165 Plastic protective pane for the food industry · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21166 Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168 Daylight filter · O2D · Housing materials: housing: diecast zinc black / lens: PMMA / Metal ring: aluminium black anodised E21172 Sensors for 3D object recognition Type Operating principle Resolution (pixels) Angle of aperture (horizontal x vertical) Lighting [°] Max. sampling rate [Hz] Ambient temperature Drawing no. Order no. 20 -10...50 7 O3D200 20 -10...50 7 O3D201 [°C] PMD 3D sensor · Type O3D · M12 connector · metal · DC · Connector groups 17, 18 PMD 3D sensor 64 x 48 30° x 40° Infrared LED PMD 3D camera · Type O3D · M12 connector · metal · DC · Connector groups 17, 18 PMD 3D camera 64 x 48 30° x 40° Infrared LED Product selectors and further information can be found at: www.ifm.com 326 Object recognition Software for 3D sensors Type Description Order no. Operating software for PMD 3D sensor · O3D E3D200 Operating software for PMD 3D camera · O3D E3D201 Panel PC for vision sensors Type Description Order no. Touch Panel PC · AFL-12A-ATOM-N270/WT-R/1GB-R20 · 12.1„ colour display · Intel Atom CPU 1.6 GHz · 1 GByte RAM · Windows XP Embedded E2D400 Mounting bracket · for Touch Panel PC · for wall mounting · VESA standard 100 x 100 mm · Housing materials: fixture: metal E2D401 Mounting set · for Touch Panel PC · for control cabinet mounting · Housing materials: fixture: metal / End cap: plastics E2D402 Fixing components for 3D sensors Type Description Order no. Mounting set · O3D · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E3D103 mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939 mounting rod · Ø 14 · Length: 200 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21228 mounting rod · Ø 14 · Length: 300 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21229 mounting rod · Ø 14 · Length: 500 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21232 You can find wiring diagrams and scale drawings from page 329 327 Object recognition Connection cables for 2D and 3D sensors Type Description Jumper · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898 Jumper · straight / straight · Ethernet · Patch cable · 2 m · Housing materials: PUR / PC E12090 Jumper · straight / straight · Ethernet · gold-plated contacts · 2 m · Housing materials: TPU E21138 Jumper · straight / straight · Ethernet · gold-plated contacts · 5 m · Housing materials: TPU E21139 Jumper · straight / straight · Ethernet · gold-plated contacts · 10 m · Housing materials: TPU E21137 Jumper · straight / straight · Ethernet · 2 m · Housing materials: PUR E21135 Jumper · straight / straight · Ethernet · 5 m · Housing materials: PUR E21136 Jumper · straight / straight · Ethernet · Cross-over patch cable · 10 m · Housing materials: PUR / PC E12204 Jumper · straight / straight · Ethernet · Cross-over patch cable · 20 m · Housing materials: PUR / PC E12205 Socket · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 2 m · Housing materials: PUR E11231 Socket · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housing materials: PUR E11232 Socket · straight · Free from halogen · M12 connector · 5 m · Housing materials: PUR E11807 Socket · straight · Free from halogen · M12 connector · 10 m · Housing materials: PUR E11311 Socket · straight · Free from halogen · M12 connector · 2 m · Housing materials: PUR E11950 Product selectors and further information can be found at: www.ifm.com 328 Order no. Object recognition Type Description Order no. Adapter · angled · Connector E21140 Jumper · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080 Jumper · straight / straight · Ethernet · Cross-over patch cable · 5 m · Housing materials: PUR E30112 Wiring diagrams Core colours 2 BK black BN brown 1 BU blue 4 WH white L+ 2 3 L 1 BN L+ BK WH BU L Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 1 42 3 1 42 2 53,5 3 2 59 21 20,5 24,5 4,3 1: display, 2: Focus setting, 3: Centre of the lens axes 7 M12x1 M12x1 49,5 1: display, 2: Focus setting, 3: Centre of the lens axes 3 33,4 25 9,2 12,6 44 25,2 38,5 9,5 M12x1 M12x1 25 3 66,5 19,7 33 19 7 4 9,5 19 19 80 45 57 60 24,5 4,3 80 45 57 60 20,5 21 3 LED 21,9 329 Object recognition Scale drawings / drawing no. – CAD download: www.ifm.com 6 4 81 50 LED 42 LED 31 30 4,3 50 90 103 54 24,6 3,3 9,8 14 24 4,3 M12 x1 7 3 LED 68 75 95 94 133 100 45 120 123,5 137 63,8 5 21,5 31 3,3 9,8 16 3 LED 6 119 Product selectors and further information can be found at: www.ifm.com 330 40 60,5 M12x1 M12x1 1: lens, 2: Illumination unit, 3: Display / buttons / LEDs, 4: Focus setting 6 7,3 100 141 156 18 Object recognition 331 Encoders Robust designs. Industrial standard housings. Cable entry for axial and radial use. Designs with integrated bus interface. Hollow shaft encoder for direct mounting on actuators. Encoders In many manufacturing and production processes encoders are indispensable as reliable transducers to ensure precise positioning. They convert rotary movement into digital signals. Encoders use the wear-free photoelectric detection. A pulse disc firmly attached to the shaft ensures this detection. Incremental encoders Incremental encoders generate a precisely defined number of pulses per revolution. They are a measure of the angular or linear distance moved. The coded disc is divided into separate segments which are alternately transparent or opaque. An LED emits a parallel-orientated light beam which illuminates all segments of the coded disc. Photo elements receive the modulated light and convert it into two sinusoidal signals. Digitalisation electronics amplify the signals and shape them into square-wave pulse trains which are generated via the line driver in the output. The phase difference between signals A and B, which are phase-shifted by 90 degrees, allows evaluation of the direction of rotation. Absolute encoders Absolute encoders provide an absolute numerical value for each angular position. This code value is available immediately after power is applied. This “absolute” value makes a reference procedure like the one required for the incremental encoder unnecessary. Absolute encoders are used wherever angular positions have to be allocated to a certain value and where the detection of the present position is absolutely necessary in the case of a power failure. Linear measurement by means of a counter: Rotary movement is converted into digital signals. Singleturn and multiturn Singleturn encoders divide a mechanical revolution (0 to 360 degrees) into a certain number of measuring steps. The measuring values are repeated after one revolution. The maximum resolution is 8192. Multiturn encoders, however, do not only detect angular positions but also distinguish between multiple revolutions. 332 Hollow shaft encoder for direct mounting on the axis. Encoders System overview Page Incremental encoders with solid shaft 334 - 337 Incremental encoders with hollow shaft 337 - 338 Absolut singleturn - encoders (SSI) 338 Absolute multiturn encoders (SSI) 339 Absolute multiturn encoders (Profibus) 339 Absolute singleturn - encoders (CANopen) 339 Absolute multiturn - encoders (CANopen) 339 - 340 Absolute multiturn - encoders (CANopen) for mobile applications 340 Fixing accessories for encoders 340 Couplings for encoders 341 Measuring wheels for encoders 342 Connectors for encoders 342 - 343 Scale drawings / drawing no. – CAD download: www.ifm.com 344 - 345 333 Encoders Incremental encoders with solid shaft Type Resolution Ub f Iload Shaft Cable entry Drawing no. Order no. [mm] Ambient temperature [°C] [V] [kHz] [mA] 300 20 6 -30...100 radial / axially 1 RB1015 Cable 2 m · Output function TTL output 20 mA 500 5 Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 5 10...30 160 50 6 -30...70 radial / axially 1 RB6044 10 10...30 160 50 6 -30...70 radial / axially 1 RB6001 20 10...30 160 50 6 -30...70 radial / axially 1 RB6002 25 10...30 160 50 6 -30...70 radial / axially 1 RB6003 30 10...30 160 50 6 -30...70 radial / axially 1 RB6004 50 10...30 160 50 6 -30...70 radial / axially 1 RB6005 60 10...30 160 50 6 -30...70 radial / axially 1 RB6006 100 10...30 160 50 6 -30...70 radial / axially 1 RB6007 125 10...30 160 50 6 -30...70 radial / axially 1 RB6009 150 10...30 160 50 6 -30...70 radial / axially 1 RB6010 200 10...30 160 50 6 -30...70 radial / axially 1 RB6011 250 10...30 160 50 6 -30...70 radial / axially 1 RB6012 360 10...30 160 50 6 -30...70 radial / axially 1 RB6013 400 10...30 160 50 6 -30...70 radial / axially 1 RB6014 Product selectors and further information can be found at: www.ifm.com 334 Encoders Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Cable entry Drawing no. Order no. Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 500 10...30 160 50 6 -30...70 radial / axially 1 RB6015 600 10...30 160 50 6 -30...70 radial / axially 1 RB6016 1000 10...30 160 50 6 -30...70 radial / axially 1 RB6029 Cable 2 m · Output function TTL output 20 mA 500 5 300 20 6 -40...100 radial / axially 2 RU1016 1000 5 300 20 6 -40...100 radial / axially 2 RU1024 1024 5 300 20 6 -40...100 radial / axially 2 RU1025 2000 5 300 20 6 -40...100 radial / axially 2 RU1033 2500 5 300 20 6 -40...100 radial / axially 2 RU1036 Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 100 10...30 300 50 6 -40...100 radial / axially 2 RU6003 250 10...30 300 50 6 -40...100 radial / axially 2 RU6010 360 10...30 300 50 6 -40...100 radial / axially 2 RU6013 500 10...30 300 50 6 -40...100 radial / axially 2 RU6016 1000 10...30 300 50 6 -40...100 radial / axially 2 RU6024 1024 10...30 300 50 6 -40...100 radial / axially 2 RU6025 2000 10...30 300 50 6 -40...100 radial / axially 2 RU6033 You can find scale drawings from page 344 335 Encoders Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Cable entry Drawing no. Order no. Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 2500 10...30 300 50 6 -40...100 radial / axially 2 RU6036 3600 10...30 300 50 6 -40...100 radial / axially 2 RU6040 5000 10...30 300 50 6 -40...100 radial / axially 2 RU6045 10000 10...30 300 50 6 -40...100 radial / axially 2 RU6052 Cable 2 m · Output function TTL output 20 mA 500 5 300 20 10 -40...100 radial / axially 3 RV1016 1000 5 300 20 10 -40...100 radial / axially 3 RV1024 1024 5 300 20 10 -40...100 radial / axially 3 RV1025 2000 5 300 20 10 -40...100 radial / axially 3 RV1033 2500 5 300 20 10 -40...100 radial / axially 3 RV1036 5000 5 300 20 10 -40...100 radial / axially 3 RV1051 Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 50 10...30 300 50 10 -40...100 radial / axially 3 RV6001 100 10...30 300 50 10 -40...100 radial / axially 3 RV6003 200 10...30 300 50 10 -40...100 radial / axially 3 RV6009 250 10...30 300 50 10 -40...100 radial / axially 3 RV6010 360 10...30 300 50 10 -40...100 radial / axially 3 RV6013 Product selectors and further information can be found at: www.ifm.com 336 Encoders Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Cable entry Drawing no. Order no. Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 500 10...30 300 50 10 -40...100 radial / axially 3 RV6016 600 10...30 300 50 10 -40...100 radial / axially 3 RV6018 1000 10...30 300 50 10 -40...100 radial / axially 3 RV6024 1024 10...30 300 50 10 -40...100 radial / axially 3 RV6025 1250 10...30 300 50 10 -40...100 radial / axially 3 RV6028 2000 10...30 300 50 10 -40...100 radial / axially 3 RV6033 2048 10...30 300 50 10 -40...100 radial / axially 3 RV6034 2500 10...30 300 50 10 -40...100 radial / axially 3 RV6036 3600 10...30 300 50 10 -40...100 radial / axially 3 RV6040 5000 10...30 300 50 10 -40...100 radial / axially 3 RV6100 Ambient temperature [°C] Cable entry Drawing no. Order no. Incremental encoders with hollow shaft Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 10 10...30 160 50 6 H7 -30...70 radial / axially 4 RA6001 100 10...30 160 50 6 H7 -30...70 radial / axially 4 RA6007 200 10...30 160 50 6 H7 -30...70 radial / axially 4 RA6011 360 10...30 160 50 6 H7 -30...70 radial / axially 4 RA6013 You can find scale drawings from page 344 337 Encoders Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Cable entry Drawing no. Order no. Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 500 10...30 160 50 6 H7 -30...70 radial / axially 4 RA6015 1000 10...30 160 50 6 H7 -30...70 radial / axially 4 RA6029 Cable 1 m · Output function HTL-output 50 mA, short-circuit protected < 1 min 100 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6342 360 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6343 500 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6344 1024 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6345 3600 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6348 4096 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6349 5000 10...30 300 50 12 H7 -40...100 radial / axially 5 RO6350 Ub f Iload Shaft Cable entry [kHz] [mA] [mm] Drawing no. Order no. [V] Ambient temperature [°C] – – 10 -40...85 radial / axially 6 RN6055 Absolut singleturn - encoders (SSI) Type Resolution Cable 1 m · Output function SSI data interface 8192 10...30 Product selectors and further information can be found at: www.ifm.com 338 Encoders Absolute multiturn encoders (SSI) Type Resolution Ub f Iload Shaft Cable entry Drawing no. Order no. [mm] Ambient temperature [°C] [V] [kHz] [mA] Cable 1 m · Output function SSI data interface 8192 10...30 – – 6 -40...85 radial / axially 2 RM6101 8192 10...30 – – 10 -40...85 radial / axially 7 RM6104 Cable entry Drawing no. Order no. Absolute multiturn encoders (Profibus) Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Terminals · Output function Profibus data interface 25 bits 10...30 – – 6 -40...70 – 8 RM3001 25 bits 10...30 – – 10 -40...70 – 9 RM3005 Cable entry Drawing no. Order no. Absolute singleturn - encoders (CANopen) Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Terminals · Output function CANopen interface 13 bits 9...36 – – 6 -40...70 – 8 RN7003 13 bits 9...36 – – 10 -40...70 – 9 RN7004 Cable entry Drawing no. Order no. – 8 RM7003 Absolute multiturn - encoders (CANopen) Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] – 6 -40...70 Terminals · Output function CANopen interface 25 bits 9...36 – You can find scale drawings from page 344 339 Encoders Type Resolution Ub f Iload Shaft Cable entry Drawing no. Order no. [mm] Ambient temperature [°C] [V] [kHz] [mA] – 10 -40...70 – 9 RM7004 Ambient temperature [°C] Cable entry Drawing no. Order no. -40...85 axial 10 RM9000 Terminals · Output function CANopen interface 25 bits 9...36 – Absolute multiturn - encoders (CANopen) for mobile applications Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] M12 connector · Output function CANopen interface · Connector group 137 24 bits 10...30 – – 10 Fixing accessories for encoders Type Description Resilient base for angle flanges · Housing materials: aluminium black anodised E60036 Angle bracket · for encoders · for type RB, RC, RU, RN, RM · Housing materials: aluminium black anodised E60033 Angle bracket · for encoders · for type RM, RMU, RN, RU · Housing materials: aluminium black anodised E60034 Angle bracket · for encoders · for type RMV, RV · Housing materials: aluminium black anodised E60035 Angle bracket · for encoders · for type RM · Housing materials: aluminium black anodised E60302 Fastening clamp · for synchro flange · Housing materials: steel E60041 Product selectors and further information can be found at: www.ifm.com 340 Order no. Encoders Couplings for encoders Type Description Order no. Flexible coupling with clamp connection [KV] · Ø 4 mm / Ø 6 mm · Housing materials: aluminium E60119 Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60064 Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60065 Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 8 mm · Housing materials: aluminium E60120 Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 10 mm · Housing materials: aluminium E60066 Flexible coupling with clamp connection [KV] · Ø 10 mm / Ø 10 mm · Housing materials: aluminium E60067 Flexible coupling with adjusting screw connection [SV] · Ø 4 mm / Ø 6 mm · Housing materials: aluminium E60062 Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60063 Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 8 mm · Housing materials: aluminium E60027 Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 10 mm · Housing materials: aluminium E60028 Flexible coupling with adjusting screw connection [SV] · Ø 10 mm / Ø 10 mm · Housing materials: aluminium E60022 Spring disc coupling electrically isolating · Ø 6 mm / Ø 6 mm · Housing materials: diecast zinc / PA E60121 Spring disc coupling electrically isolating · Ø 6 mm / Ø 10 mm · Housing materials: diecast zinc / PA E60117 Spring disc coupling electrically isolating · Ø 10 mm / Ø 10 mm · Housing materials: diecast zinc / PA E60118 You can find scale drawings from page 344 341 Encoders Measuring wheels for encoders Type Description Order no. Measuring wheel · Ø 159.15 mm / Ø 10 mm · cross-knurl · Housing materials: wheel: aluminium E60098 Measuring wheel · Ø 63.6 mm / Ø 6 mm · aluminium · Housing materials: wheel: aluminium E60006 Measuring wheel · Ø 63.6 mm / Ø 10 mm · aluminium · Housing materials: wheel: aluminium E60095 Measuring wheel · Ø 159.15 mm / Ø 10 mm · rubber · Housing materials: wheel: aluminium / tread: NBR nitrile E60076 Measuring wheel · Ø 159.15 mm / Ø 10 mm · smooth plastic · Housing materials: wheel: Hytrel TPE-E E60110 Measuring wheel · Ø 63.66 ±0.1 mm / Ø 6 mm · smooth plastic · Housing materials: wheel: Hytrel TPE-E E60111 Measuring wheel · Ø 63.66 ±0.1 mm / Ø 10 mm · smooth plastic · Housing materials: wheel: Hytrel TPE-E E60112 Measuring wheel · Ø 63.66 ±0.1 mm / Ø 6 mm · grooved plastic · Housing materials: wheel: Hytrel TPE-E E60137 Measuring wheel · Ø 63.66 ±0.1 mm / Ø 10 mm · grooved plastic · Housing materials: wheel: Hytrel TPE-E E60138 Connectors for encoders Type Description Socket · straight · wirable · M18 connector · Housing materials: brass nickel-plated E60174 Socket · angled · wirable · M18 connector · Housing materials: brass nickel-plated E60175 Socket · angled · wirable · M23 connector · Housing materials: brass nickel-plated E10447 Product selectors and further information can be found at: www.ifm.com 342 Order no. Encoders Type Description Order no. Socket · straight · wirable · M23 connector · Housing materials: brass nickel-plated E10448 Socket · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60124 Socket · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60122 Socket · straight · wirable · M23 connector · Housing materials: brass nickel-plated E60136 Socket · straight · M23 connector · 5 m · Housing materials: brass plastic coated / PA 6.6 black E60144 Socket · straight · M23 connector · 10 m · Housing materials: brass plastic coated / PA 6.6 black E60147 Socket · angled · Free from silicone · gold-plated contacts · M12 connector · 2 m · Housing materials: PUR E11986 Socket · angled · Free from silicone · gold-plated contacts · M12 connector · 10 m · Housing materials: PUR E11987 Socket · straight · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 10 m · Housing materials: PUR E12074 Plug · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60141 Socket · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60157 Socket · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60146 Plug · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60123 Plug · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60128 You can find scale drawings from page 344 343 Encoders Scale drawings / drawing no. – CAD download: www.ifm.com 6 1 1 2 1 15 2 37,5 2 46,7±0,5 42 30° 20 4 50 h7 58 18 35 10 6 25 12 0° 4,5 6 3 3 1: reference mark, 2: M3 5 mm deep 2 1: reference mark, 2: M4 5 mm deep 2 1 46,7±0,5 42 7 10 4 46,7±0,5 6 1 20 4 6 50 h7 58 12 0° 10 50 h7 58 42 12 0° 3 3 6 3 3 1: reference mark, 2: M4 5 mm deep 3 M4 5 mm deep 2 1 46,7±0,5 8 20 1,5 48 1 1 10 42 36f8 58 80 10,5 4 6 12 0° ° 120 50 58 h7 10 6 24 1: reference mark, 2: M3 5 mm deep 3 3 20° 4 18 20 30° 1: M4 5 mm deep 35 42 6 H7 13,5 3,3 42,1 9 4,5 1 21 2x 1,5 48 70 20 36 f8 58 10 ° 120 5 10 47,2±0,5 34,5 20° 28 58 63 68 12 H7 24 3,2 20 1: M4 5 mm deep 6 24 TX 8 Product selectors and further information can be found at: www.ifm.com 344 18 Encoders Scale drawings / drawing no. – CAD download: www.ifm.com 10 100 57 4 36,5 30 24 4 36 9 20 M12 x1 10 23 LED 345 Evaluation systems Easy adjustment and parameter setting. Primary voltage 24V dc or 110 / 230V ac, wide-range input. Programmable switching characteristics. Standstill, overspeed, direction, slip and frequency conversion, counter. Switching relays and transistor outputs, scalable analogue output. Evaluation systems Although PLC applications in industrial automation are becoming more and more versatile there are still numerous processes in practice which require decentralised monitoring. For this ifm electronic offers a number of pulse evaluation systems in the product group “ecomat 200”. The application area ranges from simple standstill monitoring or blockage protection of a conveyor belt, maximum speed monitoring in wind power stations, slip monitoring of couplings through to direction monitoring, e.g. twin pumps with non-return valves. Different units for rail mounting and compact designs in M18 and M30 metal housings are available. They include microprocessor-controlled units for pane mounting to display analogue signals, RPM, speeds, processing times, quantities and electronic preset counters for the detection of quantities or linear measurement. All units are distinguished by a high reliability and easy handling. Independent of the PLC they indicate operating states or signal faults. This helps to reduce downtimes and production loss. Pulse evaluation systems are used for decentralised monitoring of drives. ifm electronic offers the following evaluation systems: – Speed monitors – Standstill monitors – Slip / synchronisation monitors – Direction monitors – Frequency-to-current converters – Threshold relays – Displays with frequency and analogue input – Counters – Switching amplifiers 346 Machine cycles must also be monitored in conveying. Evaluation systems System overview Page Universal speed monitors 348 Universal speed monitors with sensor wire monitoring 348 Dual speed monitors 348 Dual speed monitors with sensor wire monitoring 349 Slip monitors 349 Slip monitors with sensor wire monitoring 349 Slip / synchronous monitors 349 Slip / synchronous monitors with sensor wire monitoring 350 Combined direction and speed monitors 350 Frequency-to-current converters 350 Standard speed monitors 350 - 351 Standstill monitors 351 Safety standstill monitors, SIL 3, PL e 351 Speed monitor with integrated sensor 352 - 353 Speed monitors with integrated sensor, ATEX category 3D 353 Multifunctional displays for digital signals / frequency input 354 Universal counters 354 2-channel threshold relay for analogue standard signals 354 Multifunctional displays for analogue standard signals Accessories pulse divider / pulse stretcher Accessories Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 354 - 355 355 355 - 356 356 356 - 358 347 Evaluation systems Universal speed monitors Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] Outputs analog Outputs relays Outputs transist. Drawing no. Order no. FR-1 · 2 switch points for monitoring overspeed/underspeed and acceptable range 230 AC (50...60 Hz) / 24 DC 1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2001 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2003 23...60 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2004 Outputs analog Outputs relays Outputs transist. Drawing no. Order no. Universal speed monitors with sensor wire monitoring Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] FR-1N · 2 switch points for monitoring overspeed/underspeed and acceptable range 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 Namur 8.2 V 1...60000 0.1...1000 1 2 4 1 DD2103 Inputs Input function Setting range Setting range Outputs analog Outputs relays Outputs transist. Drawing no. Order no. [puls. / min.] [Hz] Dual speed monitors Type Ub [V] FR-2 · 1 switch point each for monitoring overspeed/underspeed and acceptable range 230 AC (50...60 Hz) / 24 DC 2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2002 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2005 23...60 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2006 Product selectors and further information can be found at: www.ifm.com 348 Evaluation systems Dual speed monitors with sensor wire monitoring Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] Outputs analog Outputs relays Outputs transist. Drawing no. Order no. 2 4 1 DD2105 Outputs relays Outputs transist. Drawing no. Order no. FR-2N · 1 switch point each for monitoring overspeed/underspeed and acceptable range 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 2 Namur 8.2 V Inputs Input function 1...60000 0.1...1000 – Slip monitors Type Ub Setting range [V] FS-1 · 1 switching output for slip monitoring; 1 switching output for overspeed/underspeed and acceptable range 230 AC (50...60 Hz) / 24 DC 1 PNP / NPN / Namur slip: 0.1...99.9 % rotational speed (frequency): 1...60000 pulses/min (0.1...1000 Hz) 2 2 1 DS2001 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur slip: 0.1...99.9 % rotational speed (frequency): 1...60000 pulses/min (0.1...1000 Hz) 2 2 1 DS2003 Outputs relays Outputs transist. Drawing no. Order no. Slip monitors with sensor wire monitoring Type Ub Inputs Input function Setting range [V] FS-1N · 1 switching output for slip monitoring; 1 switching output for overspeed/underspeed and acceptable range 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 Namur 8.2 V Inputs Input function slip: 0.1...99.9 % rotational speed (frequency): 1...60000 pulses/min (0.1...1000 Hz) 2 2 1 DS2103 Outputs relays Outputs transist. Drawing no. Order no. pulse differences: 1...999 reset time: 0.0...1000.0 s 2 2 1 DS2005 pulse differences: 1...999 hysteresis: 1...999 2 2 1 DS2006 Slip / synchronous monitors Type Ub Setting range [V] FS-2 · 2 switch points for slip/synchronous monitoring 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur FS-3 · 2 switch points for synchronous monitoring 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur You can find wiring diagrams and scale drawings from page 356 349 Evaluation systems Slip / synchronous monitors with sensor wire monitoring Type Ub Inputs Input function Setting range Outputs relays Outputs transist. Drawing no. Order no. 2 2 1 DS2105 Outputs relays Outputs transist. Drawing no. Order no. [V] FS-2N · 2 switch points for slip/synchronous monitoring 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 Namur 8.2 V pulse differences: 1...999 reset time: 0.0...1000.0 s Combined direction and speed monitors Type Ub Inputs Input function Setting range [V] FD-1 · 1 switching output for indication of direction; 1 switching output for overspeed/underspeed and acceptable range 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 cycle time: 0.0...1000 s PNP / NPN / Namur rotational speed (frequency): 1...60000 pulses/min (1...1000 Hz) 2 2 1 DR2003 FD-2 · 2 switching outputs for separate indication of direction; adjustable reset times for standstill monitoring 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur reset time: 0.0...1000 s 2 2 1 DR2005 Outputs analog Outputs relays Outputs transist. Drawing no. Order no. Frequency-to-current converters Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] FA-1 · Conversion of pulse sequences into analogue standard signals 27 DC (typ. 24 DC) 1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2004 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2003 Inputs Input function Setting range Setting range Outputs analog Outputs relays Outputs transist. Drawing no. Order no. [puls. / min.] [Hz] 2 DD0001 Standard speed monitors Type Ub [V] D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring 230 AC (50...60 Hz) / 24 DC 1 PNP 5...5000 – Product selectors and further information can be found at: www.ifm.com 350 – 1 – Evaluation systems Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] Outputs analog Outputs relays Outputs transist. Drawing no. Order no. D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring 230 AC (50...60 Hz) / 24 DC 1 PNP 10...10000 – – 1 – 2 DD0022 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP 5...5000 – – 1 1 2 DD0116 27...60 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP 5...5000 – – 1 1 2 DD0122 Inputs Input function Setting range Setting range Outputs analog Outputs relays Outputs transist. Drawing no. Order no. [puls. / min.] [Hz] Standstill monitors Type Ub [V] A300 · Evaluation of pulse sequences with regard to underspeed or missing pulse 230 AC (50...60 Hz) / 24 DC 1 PNP 5...25 / 20...100 – – 1 – 3 DA0001 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP 5...25 / 20...100 – – 1 1 3 DA0116 27...60 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 1 PNP 5...25 / 20...100 – – 1 1 3 DA0122 Setting range Setting range Outputs analog Outputs relays Outputs transist. Drawing no. Order no. [puls. / min.] [Hz] 1 4 DA101S Safety standstill monitors, SIL 3, PL e Type Ub Inputs Input function [V] · Monitoring rotational or linear movements for minimum switch point not reached (standstill) 24 DC 1 PNP – 0.2 / 0.5 / 1.0 / 2.0 – 2 You can find wiring diagrams and scale drawings from page 356 351 Evaluation systems Speed monitor with integrated sensor Type Output Dimensions Sensing range [mm] [mm] Output Output Setting range Start-up delay [V] [puls. / min.] [s] 12 nf Order no. DC PNP 10...36 DC 3...6000 0...15 5 DI6001 M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 12 6 DI0001* M30 / L = 81 10 f AC/DC 20...250 AC/DC 50...3000 12 6 DI0002* M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 < 0.5 6 DI0004* · Wiring diagram no. 3 M30 / L = 81 10 f DC PNP 10...36 DC 3...300 15 6 DI5001 M30 / L = 81 10 f DC PNP 10...36 DC 30...3000 15 6 DI5003 M30 / L = 81 10 f DC PNP 10...36 DC 30...3000 0 6 DI5011 DC PNP 10...36 DC 3...300 15 6 DI5005 · Wiring diagram no. 4 10 f · Wiring diagram no. 5 M30 / L = 81 10 f DC PNP 10...36 DC 3...300 15 7 DI5004 M30 / L = 81 10 f DC PNP 10...36 DC 3...300 5 7 DI5007 Product selectors and further information can be found at: www.ifm.com 352 Drawing no. · Wiring diagram no. 2 M30 / L = 81 Output Ub · Wiring diagram no. 1 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M18 / L = 68 Output Electrical design Evaluation systems Type Output Dimensions Sensing range [mm] [mm] Electrical design Ub Setting range Start-up delay [V] [puls. / min.] [s] Drawing no. Order no. 8 DI5009 · Wiring diagram no. 6 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 135, 136 M30 / L = 82 10 f DC PNP 10...36 DC 3...300 15 f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Speed monitors with integrated sensor, ATEX category 3D Type Output Output Dimensions Sensing range [mm] [mm] Output Ub Setting range Start-up delay [V] [puls. / min.] [s] Drawing no. Order no. · Wiring diagram no. 2 M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 12 6 DI001A* M30 / L = 81 10 f AC/DC 20...250 AC/DC 50...3000 12 6 DI002A* DC PNP 10...36 DC 5...300 15 6 DI501A · Wiring diagram no. 3 M30 / L = 81 Output Electrical design 10 f · Wiring diagram no. 6 · Connector groups 132, 134 M30 / L = 82 10 f DC PNP 10...36 DC 5...300 15 8 DI502A M30 / L = 82 10 f DC PNP 10...36 DC 5...300 5 8 DI503A DC PNP 10...36 DC 3...6000 0...15 5 DI601A · Wiring diagram no. 1 M18 / L = 68 12 nf f = flush / nf = non flush * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting), Place the fuse outside the hazardous area. Recommendation: check the unit for reliable function after a short circuit. You can find wiring diagrams and scale drawings from page 356 353 Evaluation systems Multifunctional displays for digital signals / frequency input Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] Outputs analog Outputs relays Outputs transist. Drawing no. Order no. FX 360 · universal evaluation and display for all physical units which can be derived from pulse sequences 115/230 2 PNP / NPN – – – – – 9 DX2001 115/230 2 PNP / NPN – – 2 – – 9 DX2002 115/230 2 PNP / NPN – – – – 2 9 DX2003 Inputs Input function Setting range Outputs relays Outputs transist. Drawing no. Order no. 1 PNP / NPN – 2 – 10 E89005 Outputs analog Outputs relays Outputs transist. Drawing no. Order no. – 1 1 1 11 DL2003 Setting range Setting range Outputs analog Outputs relays Outputs transist. Drawing no. Order no. [puls. / min.] [Hz] Universal counters Type Ub [V] Preset counter with 2 presets 90...260 AC 2-channel threshold relay for analogue standard signals Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] AL-3 · 2-channel analogue threshold relay for analogue standard signals 110...240 AC/DC (50...60 Hz) / 27 DC (typ. 24 DC) 2 2 x 0/4...20 mA – Multifunctional displays for analogue standard signals Type Ub Inputs Input function [V] AX 360 · universal unit for the display of analogue standard signals (e.g. of pressure, temperature,or flow sensors) 115/230 2 0/4...20 mA / 0...10 V – – Product selectors and further information can be found at: www.ifm.com 354 – – – 9 DX2011 Evaluation systems Type Ub Inputs Input function [V] Setting range Setting range [puls. / min.] [Hz] Outputs analog Outputs relays Outputs transist. Drawing no. Order no. AX 360 · universal unit for the display of analogue standard signals (e.g. of pressure, temperature,or flow sensors) 115/230 2 0/4...20 mA / 0...10 V – – – – 2 9 DX2012 – – 12 E89150 Description Drawing no. Order no. Pulse divider · Ratio input/output pulse 10:1 · Housing for DIN rail mounting · plastics 13 E80100 Pulse divider · Division 1...255 14 E80102 Pulse stretcher · Pulse length · IN (min): > 0.2 ms / OUT: 25 ms · Housing for DIN rail mounting · plastics 13 E80110 · scaleable display for sensors with analogue output (e.g. pressure sensors, flow sensors) – 1 4...20 mA – – – Accessories pulse divider / pulse stretcher Type Accessories Type Description Order no. Angle bracket · for type M18 · Housing materials: stainless steel E10736 Angle bracket · for type M30 · Housing materials: stainless steel E10737 Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076 You can find wiring diagrams and scale drawings from page 356 355 Evaluation systems Type Description Order no. Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077 Target wheel · Plastic disk with 8 screws as „target„ · Centered drill holes E89010 Target for pulse pickups · Strap dimensions 7 x 220 mm E89013 Wiring diagrams Core colours 3 5 BN brown BU blue BN BK black BK BU 1 1 1 L+ L+ 3 2 L L L+ 4 2 6 4 3 L BN 1 L+ BU 2 BN L1 L+ BU N L L+ 4 BK 3 L L Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 120 45 6 7A1 8A2 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 55 110 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 1 1: mounting on DIN rail 1: mounting on DIN rail Product selectors and further information can be found at: www.ifm.com 356 35,5 5 75 4 35,5 3 2 78 1 Evaluation systems Scale drawings / drawing no. – CAD download: www.ifm.com 8 3 92 82 110 55 1 2 3 4 5 6 7 8 66 59 M12 x1 35,5 75 M 30 x1,5 pot. 5 36 LED 9 10 11 12 13 14 15 16 9 1 96 1: mounting on DIN rail 48 4 105 25 9 100 35,5 129 LED 10 1: Combicon connector with screw terminals, 2: mounting on DIN rail 105 86,5 48 3 45 5 77 68 56 40 11 M18 x1 M12 x1 10 4 1 2 120 45 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 78 35,5 1: 3 LED, 2: setting pushbutton 6 18 81 67 61 58 1 9 M30 x1,5 pot. 36 2 LED 1: mounting on DIN rail 12 5 50 75 4 33 39 7 92 81 67 61 58 29 18 2 LED 36 31 2 control panel cutout: 68 x 33 mm (according to DIN) 41 M30 x1,5 pot. 5 M3 23 357 Evaluation systems Scale drawings / drawing no. – CAD download: www.ifm.com 13 42 28 96 66 123 4567 14 59 98 71 LED Product selectors and further information can be found at: www.ifm.com 358 Evaluation systems 359 Evaluation systems for safety and EX 360 Evaluation systems for safety and EX Safety System description / System overview Product selection chart Scale drawings / drawing no. – CAD download: www.ifm.com 362 - 363 364 365 EX System description / System overview Product selection chart Scale drawings / drawing no. – CAD download: www.ifm.com 366 - 367 368 368 361 Evaluation systems for safety and EX Multifunctional with relay outputs or semiconductor outputs. Connection of electro-sensitive protective equipment. e-stop and possibility to connect mechanical safety relays. Two-hand control to EN 574 up to type IIIC, mechanical or electronic. Certified to IEC 61508, ISO 13849-1, EN 574. Safety relays for protection of operators and machinery The EC machinery directive stipulates machinery should not present a risk (EN1050 and EN ISO 14121-1). Since there is no zero risk, the aim is to achieve an acceptable residual risk. If safety is dependent on control systems, these must be designed so as to minimise malfunction. For this, ifm offers multifunctional safety relays. A major advantage of these units is their flexibility. They perform monitoring tasks in safety applications in conjunction with different electro-sensitive protective equipment (ESPE). On the safe side. The relays are certified according to IEC 61508 SIL3, ISO 13849-1 PL e and EN 574 up to type IIIC. They have several multifunctional self-detecting and self-monitoring inputs as well as short-circuit proof outputs. Concerning the type of output the user can select between relay outputs and semiconductor outputs. Moreover, outputs with switchoff delay are available for specific applications. It is possible to connect OSSD sensors, mechanical switches (e-stop) or implement two-hand applications with electronic or mechanical switches. When used as twohand control devices, the requirements of type IIIB to EN574 can be met. The units have a simultaneity monitoring of inputs. The offer the functions “automatic start” or “monitored start” and also allow monitoring of external relay contacts. 362 Mechanical as well as electronic safety sensors can be connected to the safety relays. Safety relays monitor complete series of safety sensors. Safety System overview Page Safety relays with relay outputs for fail-safe sensors 364 Safety relays with solid state outputs for fail-safe sensors 364 Safety relays for safety light curtains 364 Accessories 364 Scale drawings / drawing no. – CAD download: www.ifm.com 365 363 Evaluation systems for safety and EX Safety relays with relay outputs for fail-safe sensors Type Ub Electrical design ISO 13849-1: Categorie / performance Level IEC 61508: SIL Drawing no. Order no. 24 relay 4/e 3 1 G1501S 24 relay 4/e 3 2 G1502S [V] Safety relays with solid state outputs for fail-safe sensors Type Ub Electrical design ISO 13849-1: Categorie / performance Level IEC 61508: SIL Drawing no. Order no. Semi-conductor outputs 4/e 3 3 G1503S Electrical design ISO 13849-1: Categorie / performance Level IEC 61508: SIL Drawing no. Order no. relay 4/e 3 4 G2001S [V] 24 Safety relays for safety light curtains Type Ub [V] 24 Accessories Type Description Safety T-splitter · T-piece for the pseudo-serial connection of fail-safe sensors · Housing materials: PUR Product selectors and further information can be found at: www.ifm.com 364 Order no. E11569 Safety Scale drawings / drawing no. – CAD download: www.ifm.com 3 1 105 LED 35,5 100 100 105 25 35,5 25 LED 1: Combicon connector with screw terminals, 2: mounting on DIN rail 4 35,5 105 114 50 114,5 35 99 2 1: Combicon connector with screw terminals, 2: mounting on DIN rail LED 1: Rotary switch for switch-off delay, 2: Combicon connector with screw terminals, 3: mounting on DIN rail 365 Evaluation systems for safety and EX One or two-channel NAMUR switching amplifiers to IEC 60947-5-6. Short-circuit and wire-break monitoring. Programmable output function. Relay or transistor outputs. Easy mounting on DIN rail. Hazardous gas and dust areas ATEX stands for “atmosphère explosible“. The 94/9/EC and 1992/92/EC directives are also commonly called “ATEX directives”. You can find hazardous areas in many different industries. Examples are the food and feedstuffs industry, woodworking, disposal and recycling operations and the typical industries of chemistry, for example gas and oil-processing plants. It is basically distinguished between “G” (gas, i.e. fog, steams) and “D” (dust). There are three unit categories each for gas and dust (1 - 3) that are analogous to the gas zones 0 / 1 / 2 or dust zones 20 / 21 / 22. Example: Electrical apparatus of the 1G category may be operated in zone 0. NAMUR switching amplifiers for hazardous areas The one or two-channel NAMUR switching amplifiers evaluate the sensor signal and control the output. They meet all requirements of the ATEX directives. Switching amplifiers with relay and transistor output are available. The switching amplifiers are designed for the connection of NAMUR sensors to IEC 60947-5-6 and mechanical switches. They provide the voltage supply via an electrical separation for the intrinsically safe circuit. Further features of the switching amplifiers are: – Programmable effective direction of the output. – Relay output designed as changeover contact. – Short-circuit proof transistor outputs. – The sensor cables are monitored for wire break and short circuit. In case of a fault, the output is blocked or the relay is de-energised. 366 Typical hazardous gas areas are found in the chemical industry, for example in gas and petroleum processing. Examples for the hazardous dust areas are the food and feedstuffs industries, but also disposal and recycling operations. EX System overview Page Switching amplifiers with ATEX approval 368 Scale drawings / drawing no. – CAD download: www.ifm.com 368 367 Evaluation systems for safety and EX Switching amplifiers with ATEX approval Type Ub Power / current consumption f Ta Output Protection Drawing no. Order no. [V] [VA] / [mA] [Hz] [°C] 115 1.0 / 10 -20...60 relay (1 changeover contact) IP 20 1 N0030A 230 1.0 / 10 -20...60 relay (1 changeover contact) IP 20 1 N0031A 115 1.3 / 10 -20...60 relay (1 changeover contact per channel) IP 20 1 N0032A 230 1.3 / 10 -20...60 relay (1 changeover contact per channel) IP 20 1 N0033A 24 / < 23 10 -20...60 relay (1 changeover contact) IP 20 1 N0530A 24 / < 50 5000 -20...60 2 transistor outputs PNP (100 mA, short-circuit protection) IP 20 1 N0531A 24 / < 50 5000 -20...60 2 outputs (optocoupler, bipolar, 100 mA, short-circuit protection) IP 20 1 N0532A 24 / < 50 10 -20...60 relay (1 changeover contact per channel) IP 20 1 N0533A 24 / < 50 5000 -20...60 2 transistor outputs PNP (100 mA, short-circuit protection) IP 20 1 N0534A Scale drawings / drawing no. – CAD download: www.ifm.com 1 20 35,5 120 112 LED 1 1: Combicon plug with screw terminals (optional) Product selectors and further information can be found at: www.ifm.com 368 EX 369 Level sensors No movings parts means high reliability and long life. Guided wave radar, capacitive and hydrostatic level sensors. Outputs for continuous or point level measurement. Integrated LED display for local indication of the current level. Suitable for common industrial and process fluids. Level sensors In industrial applications where fluids or bulk material are used, storage tanks or silos are used for processing or storing of media. Sensors are used to detect the levels. Even critical process conditions such as emptying a hydraulic tank or the unintentional overspill of a tank are monitored by level sensors. Advantages of electronic sensors Deposits and wear and tear often lead to failures in particular if mechanical switches are in contact with the medium. The electronic ifm sensors however can do without any mechanical components. This makes the sensors especially robust and reliable. Another advantage of electronic sensors is the local indication of the level or the easy setting of the switching threshold simply by pressing a button. Measurement technique For continuous level measurement the level is detected continuously, converted into an electrical signal and indicated. Depending on the type the units have freely programmable switching outputs or an analogue output for further processing. Measurement in the medium: Probe sensors will be directly immersed in the medium to be monitored. Continuous level sensors from ifm electronic use three different physical measuring principles: For capacitive measurement the probe and the tank form an electrical capacitor. The capacity changes with the level and is converted into a level measurement by a microprocessor. For hydrostatic level measurement a measuring cell detects the hydrostatic pressure of the material. Here the pressure change is a measure for the level. The efector gwr level sensor operates on the principle of guided wave radar. Electromagnetic pulses are transmitted by the sensor head and guided along the probe. If the microwave pulse hits the medium to be detected, it is reflected and the time of flight is evaluated by the sensor. 370 For special applications: Capacitive probe sensor for monitoring oils and coolants. Level sensors System overview Electronic level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 Electronic level sensors for oils and coolants Page 372 372 - 373 Point level sensors for hygienic areas 373 Variable level sensors, guided wave radar 373 Compact sensors for level and temperature monitoring 374 Compact sensors for level and leakage monitoring 374 Sensors for hydrostatic level monitoring Sensors for hydrostatic level monitoring ATEX category 1G/1D Sensors for hydrostatic level monitoring in hygienic and wet areas 374 - 375 375 375 - 376 Point level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 377 Point level sensors for oils and lubricants 377 Oil moisture sensor 378 Accessories for level sensors LK, LT, LL, LI 378 - 379 Accessories for level sensors LR 379 - 381 Accessories for level sensors PA, PG, PI, PN, PS, PY 381 - 382 Accessories for level sensors LM 382 - 383 Wiring diagrams 383 - 384 Scale drawings / drawing no. – CAD download: www.ifm.com 384 - 387 371 Level sensors Electronic level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 Type Probe length Active zone Inactive zone Ub [mm] [mm] [mm] [V] Medium temperature water [°C] Medium temperature oil [°C] Iload [mA] Drawing no. Order no. M12 connector · Output function 1 x normally open / closed programmable (OUT1) 1 x normally closed (OUT-OP, overflow output) · DC PNP · Wiring diagram no. 1 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 264 195 53 / 15 12...30 0...35 0...65 200 1 LK1222 472 390 53 / 30 12...30 0...35 0...65 200 1 LK1223 728 585 102 / 40 12...30 0...35 0...65 200 1 LK1224 Medium temperature water [°C] Medium temperature oil [°C] Iload Drawing no. Order no. Electronic level sensors for oils and coolants Type Probe length Active zone Inactive zone Ub [mm] [mm] [mm] [V] [mA] M12 connector (according to EN 61076-2-101) · Output function 1 x analogue 4...20 mA / 0...10 V (OUT2); 1 x normally open / closed programmable (OUT-OP) · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 107, 108, 110, 135 264 195 53 / 15 18...30 0...35 (LK3122 + E43100: 0...65) 0...70 200 2 LK3122 472 390 53 / 30 18...30 0...35 (LK3123 + E43101: 0...60) 0...70 200 2 LK3123 728 585 102 / 40 18...30 0...35 (LK3124 + E43102: 0...55) 0...70 200 2 LK3124 M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 3 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 264 195 53 / 15 18...30 0...35 (LK1022 + E43100: 0...65) 0...70 200 2 LK1022 472 390 53 / 30 18...30 0...35 (LK1023 + E43101: 0...60) 0...70 200 2 LK1023 728 585 102 / 40 18...30 0...35 (LK1024 + E43102: 0...55) 0...70 200 2 LK1024 M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 4 · Connector groups 17, 18 264 195 53 / 15 18...30 0...35 (LK8122 + E43100: 0...65) 0...70 200 3 LK8122 472 390 53 / 30 18...30 0...35 (LK8123 + E43101: 0...60) 0...70 200 3 LK8123 Product selectors and further information can be found at: www.ifm.com 372 Level sensors Type Probe length Active zone Inactive zone Ub [mm] [mm] [mm] [V] Medium temperature water [°C] Medium temperature oil [°C] Iload [mA] Drawing no. Order no. M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 4 · Connector groups 17, 18 728 585 102 / 40 18...30 0...35 (LK8124 + E43102: 0...55) 0...70 200 3 LK8124 Point level sensors for hygienic areas Type Process connection Process pressure max. Application Protection Drawing no. Order no. [bar] M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 5 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G½ -1...16 water, water-based medium IP 68 / IP 69K 4 LMT100 G½ -1...16 oils, grease IP 68 / IP 69K 4 LMT110 Variable level sensors, guided wave radar Type Process connection Probe length Active zone Inactive zone Ub Medium temperature Iload [mm] [mm] [mm] [V] [°C] [mA] Drawing no. Order no. M12 connector (according to EN 61076-2-101) · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DC PNP · Wiring diagram no. 6 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¾ A 100...1600 HIGH: L - 40; LOW: L - 60 HIGH: 30 / 10; LOW: 30 / 30 18...30 0...80 200 5 LR3000 ¾" NPT 150...1600 L - 50 40/10 18...30 0...80 200 6 LR3300 M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 3 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¾ A 100...1600 HIGH: L - 40; LOW: L - 60 HIGH: 30 / 10; LOW: 30 / 30 18...30 0...80 200 5 LR7000 ¾„ NPT 150...1600 L - 50 40/10 18...30 0...80 200 6 LR7300 M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 7 · Connector groups 17, 18 G¾ A 100...1600 HIGH: L - 40; LOW: L - 60 HIGH: 30 / 10; LOW: 30 / 30 18...30 0...80 200 7 LR8000 ¾„ NPT 150...1600 L - 50 – 18...30 0...80 200 8 LR8300 You can find wiring diagrams and scale drawings from page 383 373 Level sensors Compact sensors for level and temperature monitoring Type Probe length Active zone Inactive zone Ub [mm] [mm] [mm] [V] Medium temperature water [°C] Medium temperature oil [°C] Iload [mA] Drawing no. Order no. M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable (level) 2 x normally open / closed programmable (temperature) · DC PNP · Wiring diagram no. 8 · Connector groups 17, 18 264 195 53 / 15 18...30 – 0...70 200 9 LT8022 472 390 53 / 30 18...30 – 0...70 200 9 LT8023 728 585 102 / 40 18...30 – 0...70 200 9 LT8024 Medium temperature water [°C] Medium temperature oil [°C] Iload Drawing no. Order no. Compact sensors for level and leakage monitoring Type Probe length Active zone Inactive zone Ub [mm] [mm] [mm] [V] [mA] M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 9 · Connector groups 17, 18 264 195 53 / 15 18...30 0...35 (LL8022 + E43100: 0...65) 0...70 200 9 LL8022 472 390 53 / 30 18...30 0...35 (LL8023 + E43101: 0...60) 0...70 200 9 LL8023 728 585 102 / 40 18...30 0...35 (LL8024 + E43102: 0...55) 0...70 200 9 LL8024 Drawing no. Order no. Sensors for hydrostatic level monitoring Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Output 4...20 mA analogue · Wiring diagram no. 10 – – 0...0.25 2 2.4 10...30 10 PS3208 – – 0...0.6 4 4.8 10...30 10 PS3407 – – 0...1 5 6 10...30 10 PS3417 Product selectors and further information can be found at: www.ifm.com 374 Level sensors Type Process connection Display Measuring range [bar] LED Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. 9.6...32 11 PA3028 Drawing no. Order no. Output 4...20 mA analogue · Wiring diagram no. 11 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...0.25 10 30 Sensors for hydrostatic level monitoring ATEX category 1G/1D Type Measuring range [bar] Cable length / material Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Output 4...20 mA analogue · Wiring diagram no. 12 0...0.25 5m FEP cable 2 2.4 10...30 12 PS308A 0...0.6 10 m FEP cable 4 4.8 10...30 12 PS307A 0...1 15 m FEP cable 5 6 10...30 12 PS317A Ub DC [V] Drawing no. Order no. Sensors for hydrostatic level monitoring in hygienic and wet areas Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable) · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 Aseptoflex Vario Display unit -0.005...0.1 4 30 20...32 13 PI2789 Aseptoflex Vario Display unit -0.0124...0.25 10 30 20...32 13 PI2798 Aseptoflex Vario Display unit -1...1 10 30 20...32 13 PI2799 Aseptoflex Vario Display unit -0.05...1 10 30 20...32 13 PI2797 Aseptoflex Vario Display unit -0.124...2.5 20 50 20...32 13 PI2796 G1 A Display unit -0.005...0.1 4 30 20...32 14 PI2889 G1 A Display unit -0.124...2.5 20 50 20...32 14 PI2896 You can find wiring diagrams and scale drawings from page 383 375 Level sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable) · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 G1 A Display unit -0.05...1 10 30 20...32 14 PI2897 G1 A Display unit -0.0124...0.25 10 30 20...32 14 PI2898 G1 A Display unit -1...1 10 30 20...32 14 PI2899 M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · Wiring diagram no. 15 · Connector groups 9, 10, 11, 107, 108, 110, 135 Aseptoflex Vario Display unit -0.005...0.1 4 30 18...32 15 PG2789 Aseptoflex Vario Display unit -0.0124...0.25 10 30 18...32 15 PG2798 Aseptoflex Vario Display unit -1...1 10 30 18...32 15 PG2799 Aseptoflex Vario Display unit -0.05...1 10 30 18...32 15 PG2797 Aseptoflex Vario Display unit -0.124...2.5 20 50 18...32 15 PG2796 G1 A Display unit -0.124...2.5 20 50 18...32 16 PG2896 G1 A Display unit -0.05...1 10 30 18...32 16 PG2897 G1 A Display unit -0.0124...0.25 10 30 18...32 16 PG2898 G1 A Display unit -1...1 10 30 18...32 16 PG2899 G1 A Display unit -0.005...0.1 4 30 18...32 16 PG2889 Product selectors and further information can be found at: www.ifm.com 376 Level sensors Point level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 Type Probe length Output Ub [V] [mm] M12 connector · Output function 135, 136 Medium temperature water [°C] Medium temperature oil [°C] Iload Drawing no. Order no. [mA] · DC PNP · Wiring diagram no. 13 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, 132 normally closed 10...36 0...35 0...65 200 17 LI2141 273 normally closed 10...36 0...35 0...65 200 17 LI2142 481 normally closed 10...36 0...35 0...65 200 17 LI2143 Medium temperature water [°C] Medium temperature oil [°C] Iload Drawing no. Order no. Point level sensors for oils and lubricants Type Probe length Output Ub [V] [mm] M12 connector · Output function 110, 135, 136 [mA] · DC PNP · Wiring diagram no. 13 · Connector groups 9, 10, 11, 12, 107, 108, 109, 132 normally open / closed programmable 10...36 0...35 (LI5141 + E43103: 0...65) 0...65 200 17 LI5141 273 normally open / closed programmable 10...36 0...35 (LI5142 + E43100: 0...65) 0...65 200 17 LI5142 481 normally open / closed programmable 10...36 0...35 (LI5143 + E43101: 0...60) 0...65 200 17 LI5143 737 normally open / closed programmable 10...36 0...35 (LI5144 + E43102: 0...55) 0...65 200 17 LI5144 You can find wiring diagrams and scale drawings from page 383 377 Level sensors Oil moisture sensor Type Process connection Pressure rating Protection [bar] Medium temperature oil [°C] Ambient temperature Drawing no. Order no. 18 LDH100 [°C] M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 16 · Connector groups 16, 17, 18 G¾ 10 IP 67 -20...100 -20...85 Accessories for level sensors LK, LT, LL, LI Type Description Flange plate · 54-52X52 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit E43007 Flange plate · 65-80 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainless steel / Spacer: brass / rubber ring: FPM E43006 Flange plate · 73-90 D16 · for capacitive level sensors LK, LI, LT, LL · according to DIN 24557 · Housing materials: aluminium anodised / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: NBR E43001 Mounting adapter · G ¾ D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit E43003 Mounting adapter · G ¾ D16 · for capacitive level sensors LI · Housing materials: brass nickel-plated / TPE / sealing: Viton E43019 Mounting adapter · G ¾ D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43008 Mounting adapter · ¾" NPT D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM E43012 Mounting adapter · ¾" NPT D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / brass E43014 Mounting adapter · G 1 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit E43004 Mounting adapter · G 1 D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43009 Product selectors and further information can be found at: www.ifm.com 378 Order no. Level sensors Type Description Order no. Mounting adapter · 1" NPT D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM E43013 Climatic tube · Length: 132 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43103 Climatic tube · Length: 264 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43100 Climatic tube · Length: 472 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43101 Climatic tube · Length: 728 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43102 Mounting clamp · Ø 16 mm · for capacitive level sensors LK, LI, LT, LL · Housing materials: PP E43000 Mounting set · Ø 16 mm · for capacitive level sensors LK, LI, LT, LL · Housing materials: PP / Metal parts: steel galvanised E43016 Welding adapter · Ø 50 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM E43002 Protective cover · for LK / LL / LR / LT sensors · Housing materials: PP E43910 Accessories for level sensors LR Type Description Order no. Flange plate · 65-80 / G ¾ · for level sensors LR · Housing materials: flange: stainless steel E43202 Flange plate · 73-90 / G ¾ · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing: NBR E43201 Flange plate · 73-90 / ¾" NPT · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing: NBR E43206 Probe · Probe length: 240 mm · for level sensors LR · Housing materials: stainless steel E43203 You can find wiring diagrams and scale drawings from page 383 379 Level sensors Type Description Probe · Probe length: 450 mm · for level sensors LR · Housing materials: stainless steel E43204 Probe · Probe length: 700 mm · for level sensors LR · Housing materials: stainless steel E43205 Probe · Probe length: 1000 mm · for level sensors LR · Housing materials: stainless steel E43207 Probe · Probe length: 1200 mm · for level sensors LR · Housing materials: stainless steel E43208 Probe · Probe length: 1400 mm · for level sensors LR · Housing materials: stainless steel E43209 Probe · Probe length: 1600 mm · for level sensors LR · Housing materials: stainless steel E43210 Coaxial pipe · Length: 240 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43211 Coaxial pipe · Length: 450 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43212 Coaxial pipe · Length: 700 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43213 Coaxial pipe · Length: 1000 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43214 Coaxial pipe · Length: 1200 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43215 Coaxial pipe · Length: 1400 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43216 Coaxial pipe · Length: 1600 mm · G¾ · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixing bracket: stainless steel E43217 Coaxial pipe · Length: 450 mm · ¾" NPT · for level sensors LR · Housing materials: stainless steel / centring piece: PP / fixing bracket: stainless steel E43218 Coaxial pipe · Length: 700 mm · ¾" NPT · for level sensors LR · Housing materials: stainless steel / centring piece: PP / fixing bracket: stainless steel E43219 Product selectors and further information can be found at: www.ifm.com 380 Order no. Level sensors Type Description Order no. Coaxial pipe · Length: 1000 mm · ¾" NPT · for level sensors LR · Housing materials: stainless steel / centring piece: PP / fixing bracket: stainless steel E43220 Coaxial pipe · Length: 1600 mm · ¾" NPT · for level sensors LR · Housing materials: stainless steel / centring piece: PP / fixing bracket: stainless steel E43221 Accessories for level sensors PA, PG, PI, PN, PS, PY Type Description Order no. Adapter · G ¼ - G ½ · Housing materials: stainless steel / sealing: FPM E30000 Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007 Cable clamp fastener · for submersible pressure transmitter PS3 · Housing materials: steel / plastics E30399 Filter element · for submersible pressure transmitter PS3 · for fixing on the capillary tube E30400 Splitter box · with ventilation and terminal block · for submersible pressure transmitter PS3 · Housing materials: plastics E30401 Additional weight · for submersible pressure transmitter PS3 · Housing materials: stainless steel 316Ti / 1.4571 E30402 Welding adapter · Ø 50 mm · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E30122 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33212 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33213 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33712 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33713 You can find wiring diagrams and scale drawings from page 383 381 Level sensors Type Description Order no. Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33201 Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33701 Accessories for level sensors LM Type Description Welding adapter · G ½ - Ø 29 mm · for pipes · Housing materials: stainless steel 316L / 1.4435 E43301 Welding adapter · G ½ - Ø 29 mm · for pipes · with leakage port · Housing materials: stainless steel 316L / 1.4435 E43310 Welding adapter · G ½ - Ø 30 mm · for tanks · Housing materials: stainless steel 316L / 1.4435 E43300 Welding adapter · G ½ - Ø 30 mm · for tanks · with leakage port · Housing materials: stainless steel 316L / 1.4435 E43309 Welding adapter · G ½ - Ø 35 mm · ball · Housing materials: stainless steel 316L / 1.4404 E30055 Welding adapter · G ½ - Ø 45 mm · collar · Housing materials: stainless steel 316L / 1.4404 E30056 Tuning fork adapter · G ¾ · Housing materials: stainless steel 316L / 1.4435 E43302 Tuning fork adapter · G 1 · Housing materials: stainless steel 316L / 1.4435 E43303 Adapter · G ½ · pipe fitting · DN25 (1") · DIN 11851 · Housing materials: stainless steel 316L / 1.4435 E43304 Adapter · G ½ · pipe fitting · DN40 (1.5") · DIN 11851 · Housing materials: stainless steel 316L / 1.4435 E43305 Adapter · G ½ · Varivent type F · DN25 (1"), D = 50 · Housing materials: stainless steel 316L / 1.4435 E43306 Product selectors and further information can be found at: www.ifm.com 382 Order no. Level sensors Type Description Order no. Adapter · G ½ · Varivent type N · DN40 (1.5"), D = 68 · Housing materials: stainless steel 316L / 1.4435 E43307 Adapter · G ½ · Clamp · 1-1.5" · ISO 2852 / DIN 32676 · with leakage port · Housing materials: stainless steel 316L / 1.4435 E43311 Adapter · G ½ · Clamp · 2" · ISO 2852 / DIN 32676 · with leakage port · Housing materials: stainless steel 316L / 1.4435 E43312 G ½ adapter · Clamp · 1-1.5" · ISO 2852 / DIN 32676 · for units with G ½ adaptation · Housing materials: stainless steel 316L / 1.4404 E33401 G ½ adapter · Clamp · 2" · ISO 2852 / DIN 32676 · for units with G ½ adaptation · Housing materials: stainless steel 316L / 1.4404 E33402 G ½ adapter · DN25 · SMS · for units with G ½ adaptation · Housing materials: stainless steel 316L / 1.4404 E33430 sealing plug · G ½ · for G ½ adapter · Housing materials: stainless steel 316L / 1.4435 E43308 Wiring diagrams Core colours 3 5 8 BN brown GY grey 1 white 4 2 2 4 WH BU GN blue 2: Out 2 4: Out 1 green 1 L+ 3 4: 2: L L+ 1 2 3 3 L 4 5 1 6 4 6 7 L+ Out 2 L Out 1 Out 3 Out 4 n.c. 1 BN L+ 1 2 WH 1 4 BK 4: Out 1 3 BU 2: Out-OP 2 L 3 4 5 2 6 7 1 BN L+ 2 Out 2 2: OUT2 4: OUT1 3 L Out 1 1 Out 3 Out-OP / Out 4 n.c. 2 7 3 1 4 4 BK 5 L 9 4 L 2 2 WH 2: Out 2 3 BU 4: Out-OP L+ L+ 6 7 3 4 L+ Out 2 5 Out 1 6 Out 3 7 Out 4 L+ Out 2 L Out 1 Out 3 Out-OP n.c. n.c. L 383 Level sensors Wiring diagrams 10 12 BN BN L+ WH L+ GN L GY L BU 11 1 13 1 1 L+ L+ 4 2 3 L L 14 16 2 1 1 1 L+ L+ 2 4 2 L 3 1 OUT2 2 OUT1 3 4 L 5 6 3 7 1 L+ 8 2 L+ L n.c. n.c. n.c. Out 1 Out 2 n.c. screen 4 P 3 L 15 1 1 L+ 2 4 3 L+ 4 2 3 L L Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 1 50 M12 x1 I1 8 51 30,5 64 I2 A L 3 16 1: 7-segment LED display, 2: Programming buttons, 3: Housing connection with cable lug for cable 1.5 - 2.5 mm² Product selectors and further information can be found at: www.ifm.com 384 Level sensors Scale drawings / drawing no. – CAD download: www.ifm.com 5 2 2 2 3 50 3 63 50 M12 x1 57 1 87 3 4 I1 1 78 57 M12 x1 30,5 30 64 I1 A L 32 6 A I2 L 8 G3 4 I2 16 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4: Housing connection (flat-pin connector 6.3 mm following DIN 46244) 3 2 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing 6 3 50 64 2 3 63 30 1 87 57 67 1 M12 x1 57 M12 x1 30,5 50 3 I1 4 I2 I1 A L 32 8 34 6 "NPT I2 A L 16 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4: Housing connection (flat-pin connector 6.3 mm following DIN 46244) 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons 4 102 88 7 46 12 2 3 63 57 1 G1 2 87 27 78 LED M12 x1 30 18 30 50 1: tightening torque 20...25 Nm I1 32 6 I2 A L 8 G3 4 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing 385 Level sensors Scale drawings / drawing no. – CAD download: www.ifm.com 12 8 2 147 3 50 57 67 M12 x1 30 27 63 13 87 1 2 32 3 64 I1 50 6 8 M12 x1 "NPT I2 A L 34 105,8 1 16,8 52,8 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons 9 34 2 G1 3 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button 64 57 1 14 M12 x1 30,5 50 2 3 64 A L M12 x1 I1 4 3 50 I2 105,6 1 16 27,4 45,1 5 46 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4: Housing connection (flat-pin connector 6.3 mm following DIN 46244), 5: Position of the temperature measuring element 34 G1 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button 10 100 27 15 57 100 M12 x1 1 11 75 153 30 M12 x1 G1 4 21,5 27 60,5 3 16,8 1,3 30 14 2 24 G1 1: Analogue display, 2: 4-digit alphanumeric display, 3: Programming button Product selectors and further information can be found at: www.ifm.com 386 Level sensors Scale drawings / drawing no. – CAD download: www.ifm.com 17 M12 x1 1 53 L 21,3 16,6 57 16 100 M12 x1 16 A LED 1 153 1: Programming buttons 18 54 44 60,5 G1 43 14 24 34 1: Analogue display, 2: 4-digit alphanumeric display, 3: Touch button (programming button) 42 M12x1 27 3 21,6 G3 4 2 32 387 Flow sensors For liquids and gases. Special versions for food applications and hazardous areas. Optional fittings for variable process connection. Flow monitoring also for aggressive media. Flow sensors In almost all fields of process and plant engineering liquids or gases are used for coolant and lubricant supply of machines and units, ventilation of installations and buildings and the processing of products. In case of no flow of these media considerable damage and downtime may result. Thus it is very important to monitor these media. In modern installations electronic flow monitors are used for this purpose. They work without wear and tear and without mechanical components. This guarantees reliable monitoring even in case of difficult media over a long period. Operating principle Electronic flow sensors from ifm electronic operate with different measurement techniques. They meet all requirements from a simple monitoring function to the exact detection of flow quantities. Harmonised operating menus ensure that operators who use different flow sensors can quickly and precisely carry out settings on the sensors. Some flow sensors feature an integrated temperature monitor which makes an additional measuring point unnecessary. This enables to control processes in the optimum operating status especially with regard to energy savings. Analogue, binary and pulse outputs offer various possibilities to process the measured data. Due to the flexible programming by means of pushbuttons the flow sensors can be adapted to different conditions. The sensors are mounted via adapters. 388 Monitoring very small flow rates: Flow monitor with flow adapter. Optimised consumption of compressed air. Flow sensors System overview Page Magnetic-inductive flow sensors with integrated temperature measurement (sealing material FKM) 391 Magnetic-inductive flow sensors with integrated temperature measurement (sealing material EPDM) 391 Magnetic-inductive flow sensors (sealing material FKM) 392 Compact housings for adapters for flow monitoring 392 Compact housings can be configured for T-pieces for flow monitoring 393 Compact housings for adapters for flow monitoring, Hastelloy sensor tip 393 Compact housings for adapters for flow monitoring, titanium sensor tip 393 Compact designs for adapter with flow and temperature monitoring 393 Compact housings for adapters with ATEX approval group II, category 3D / 3G 394 Compact housings for adapters for hygienic and wet areas 394 Mechatronic flow sensors for machine tools Mechatronic flow sensors for liquids Flow sensors for connection to control monitors, industrial applications 394 - 395 395 395 - 396 Flow sensors for connection to control monitors, industrial applications, titanium housing 396 Flow sensors for connection to control monitors for hygienic and wet areas 397 Flow sensors for connection to control monitors for aggressive media, ceramic housing 397 Control monitors for industrial applications 397 - 398 Flow sensors for connection to control monitors with ATEX approval 398 - 399 Flow sensors for connection to control monitors with ATEX approval, ceramic housing 399 Control monitors with ATEX approval 400 Air flow monitors 400 Compressed air meters 401 Compressed air meter for special gases 401 Inline sensor for small dosing quantities of water and aqueous solutions 401 Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) 402 Accessories for flow sensors and control monitors 402 - 404 Flange adapters for flow sensors 404 - 405 Accessories for airflow monitors 405 Accessories for volumetric flow sensors Grounding clamps for magnetic-inductive volumetric flow sensors Wiring diagrams 405 - 406 406 407 - 408 389 Flow sensors System overview Page Scale drawings / drawing no. – CAD download: www.ifm.com 408 - 415 Product selectors and further information can be found at: www.ifm.com 390 Flow sensors Magnetic-inductive flow sensors with integrated temperature measurement (sealing material FKM) Type Process connection Measuring range Medium temperature Pressure rating Response time Ub [l/min] [°C] [bar] [s] [V] Drawing no. Order no. Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G½ 0.25...25.00 -10...70 16 < 0.150 19...30 1 SM6000 20...30 1 SM6004 Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 G½ 0.1...25.00 -10...70 16 < 0.150 Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¾ 0.5...50.0 -10...70 16 < 0.150 19...30 2 SM7000 20...30 2 SM7004 Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 G¾ 0.2...50.0 -10...70 16 < 0.150 Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G1 0.7...100.0 -10...70 16 < 0.150 19...30 3 SM8000 20...30 3 SM8004 Drawing no. Order no. Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 G1 0.2...100.0 -10...70 16 < 0.150 Magnetic-inductive flow sensors with integrated temperature measurement (sealing material EPDM) Type Process connection Measuring range Medium temperature Pressure rating Response time Ub [l/min] [°C] [bar] [s] [V] Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G½ 0.25...25.00 -10...70 16 < 0.150 19...30 1 SM6100 G¾ 0.5...50.0 -10...70 16 < 0.150 19...30 2 SM7100 G1 0.7...100.0 -10...70 16 < 0.150 19...30 3 SM8100 You can find wiring diagrams and scale drawings from page 407 391 Flow sensors Magnetic-inductive flow sensors (sealing material FKM) Type Process connection Measuring range Medium temperature Pressure rating Response time Ub [l/min] [°C] [bar] [s] [V] Drawing no. Order no. M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 3 · Connector groups 9, 10, 11, 107, 108, 110, 135 G½ 0...25 -10...70 16 < 0.150 19...30 4 SM6050 G¾ 0...50 -10...70 16 < 0.150 19...30 5 SM7050 G1 0...100 -10...70 16 < 0.150 19...30 6 SM8050 Drawing no. Order no. Compact housings for adapters for flow monitoring Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Ub [cm/s] [cm/s] [°C] [bar] [s] [V] 1...10 19...36 7 SI5000 M12 connector · Wiring diagram no. 4 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...80 30 M12 connector · Wiring diagram no. 5 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5002 -25...80 300 1...10 85...265 9 SI5006* 300 1...10 19...36 8 SI5004 1...2 / 1...10 19...36 8 SI5010 1/2“ UNF-Connector · Wiring diagram no. 6 · Connector group 27 3...300 / 200...3000 3...100 / 200...800 M12 connector · Wiring diagram no. 3 · Connector groups 9, 11, 107, 108, 135 3...300 / - 3...100 -25...80 / - M12 connector · Wiring diagram no. 7 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...80 300 * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Product selectors and further information can be found at: www.ifm.com 392 Flow sensors Compact housings can be configured for T-pieces for flow monitoring Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Ub Drawing no. Order no. [cm/s] [cm/s] [°C] [bar] [s] [V] 5 20...28 10 SA3010 Drawing no. Order no. M12 connector · Wiring diagram no. 18 · Connector groups 9, 10, 11, 107, 108, 110, 135 0.1...12.0 (NW15) 0.2...24.0 (NW19) 0.4...48.0 (NW24) – 0...80 30 Compact housings for adapters for flow monitoring, Hastelloy sensor tip Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Ub [cm/s] [cm/s] [°C] [bar] [s] [V] 1...2 / 1...10 19...36 8 SI0553 Drawing no. Order no. M12 connector · Wiring diagram no. 7 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...80 300 Compact housings for adapters for flow monitoring, titanium sensor tip Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Ub [cm/s] [cm/s] [°C] [bar] [s] [V] 1...2 / 1...10 19...36 8 SI5100 Drawing no. Order no. 8 SI5007 M12 connector · Wiring diagram no. 7 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...80 300 Compact designs for adapter with flow and temperature monitoring Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Ub [cm/s] [cm/s] [°C] [bar] [s] [V] 1...10 19...36 M12 connector · Wiring diagram no. 5 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...80 300 You can find wiring diagrams and scale drawings from page 407 393 Flow sensors Compact housings for adapters with ATEX approval group II, category 3D / 3G Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Ub Drawing no. Order no. [cm/s] [cm/s] [°C] [bar] [s] [V] -25...80 30 1...10 19...36 7 SI500A Drawing no. Order no. M12 connector · Wiring diagram no. 4 · Connector groups 132, 134 3...300 / 200...3000 3...100 / 200...800 Compact housings for adapters for hygienic and wet areas Type Setting range liquids / gases Greatest sensitivity Medium temperature Pressure rating Response time Probe length [cm/s] [cm/s] [°C] [bar] [s] [mm] M12 connector · Wiring diagram no. 4 · Connector groups 9, 10, 11, 107, 108, 110, 135 3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 20 11 SI6600 3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 38 12 SI6700 3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 55 13 SI6800 Drawing no. Order no. Mechatronic flow sensors for machine tools Type Process connection M12 connector · Output function Measuring range Medium temperature Pressure rating Response time Ub [l/min] [°C] [bar] [s] [V] · DC PNP · Wiring diagram no. 8 · Connector groups 9, 10, 11, 107, 108, 110, 135 G½ 0.3...25 0...60 200 < 0.01 24 14 SBU323 G½ 0.3...50 0...60 200 < 0.01 24 14 SBU324 G½ 0.3...75 0...60 200 < 0.01 24 14 SBU325 M12 connector · Output function analogue · DC · Wiring diagram no. 9 · Connector groups 9, 11, 107, 108, 135 G½ 0.3...25 0...60 200 < 0.01 24 15 SBU623 G½ 0.3...50 0...60 200 < 0.01 24 15 SBU624 Product selectors and further information can be found at: www.ifm.com 394 Flow sensors Type Process connection Measuring range Medium temperature Pressure rating Response time Ub [l/min] [°C] [bar] [s] [V] Drawing no. Order no. M12 connector · Output function analogue · DC · Wiring diagram no. 9 · Connector groups 9, 11, 107, 108, 135 G½ 0.3...75 0...60 200 < 0.01 24 15 SBU625 Measuring range Medium temperature Pressure rating Response time Ub Drawing no. Order no. [l/min] [°C] [bar] [s] [V] Mechatronic flow sensors for liquids Type Process connection M12 connector · Output function · DC PNP · Wiring diagram no. 8 · Connector groups 9, 10, 11, 107, 108, 110, 135 Rp ¾ 1...15 0...85 25 < 0.01 24 16 SBY332 Rp ½ 2...20 0...85 25 < 0.01 24 17 SBY323 Rp ¾ 1...25 0...85 25 < 0.01 24 16 SBY333 Rp ¾ 2...50 0...85 25 < 0.01 24 16 SBY334 Rp 1 5...100 0...85 25 < 0.01 24 18 SBY346 Rp 1½ 20...200 0...85 25 < 0.01 24 19 SBY357 Drawing no. Order no. Flow sensors for connection to control monitors, industrial applications Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating [cm/s] [cm/s] [°C] [s] [K/min] [bar] M12 connector · Wiring diagram no. 10 · Connector groups 13, 14, 113, 115, 137 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 30 30 20 SF6200 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 30 30 21 SF6201 You can find wiring diagrams and scale drawings from page 407 395 Flow sensors Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating [cm/s] [cm/s] [°C] [s] [K/min] [bar] Drawing no. Order no. M12 connector · Wiring diagram no. 10 · Connector groups 113, 115, 137 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 22 SF5200 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 30 23 SF5201 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 24 SF5350 3...300 / 200...3000 3...60 / 200...800 0...120 / 0...100 1...10 300 300 24 SF5300 Cable 6 m · Wiring diagram no. 11 Flow sensors for connection to control monitors, industrial applications, titanium housing Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating Drawing no. Order no. [cm/s] [cm/s] [°C] [s] [K/min] [bar] 3...60 / 200...800 0...120 / 0...100 1...10 300 300 24 SF5800 Cable 6 m · Wiring diagram no. 11 3...300 / 200...3000 M12 connector · Wiring diagram no. 10 · Connector groups 113, 115, 137 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 22 SF5700 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 25 SF5701 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 26 SF5702 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 27 SF5703 3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 28 SF5704 Product selectors and further information can be found at: www.ifm.com 396 Flow sensors Flow sensors for connection to control monitors for hygienic and wet areas Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating [cm/s] [cm/s] [°C] [s] [K/min] [bar] 3...60 / 200...800 0...120 / 0...100 1...10 15 30 Drawing no. Order no. – SF0516 Cable 6 m · Wiring diagram no. 11 3...300 / 200...2000 Flow sensors for connection to control monitors for aggressive media, ceramic housing Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating [cm/s] [cm/s] [°C] [s] [K/min] [bar] Drawing no. Order no. M12 connector · Wiring diagram no. 10 · Connector groups 13, 14, 113, 115, 137 3...60 / - 3...40 / - 5...70 / - 2...20 7 30 29 SF2405 3...60 / - 3...40 / - 5...70 / - 2...20 7 30 30 SF3405 3...60 / - 3...40 / - 5...70 / - 2...20 7 30 31 SF2410 3...60 / - 3...40 / - 5...70 / - 2...20 7 30 32 SF3410 3...40 / 200...800 5...70 / -10...80 2...20 7 30 31 SF0540 Cable 6 m · Wiring diagram no. 11 Cable 16 m · Wiring diagram no. 11 3...60 / 200...1500 Control monitors for industrial applications Type Ub / Tolerance Current consumpt. Power consumpt. [V] / [%] [mA] [VA] Power-on delay time [s] Output when flow is present Output when temperature is exceeded Output in case of wire break Drawing no. Order no. 10...80 relay energised relay energised relay de-energised 33 SN0150* Combicon connector · Wiring diagram no. 19 90...240 AC / -5 /+10 – 4 You can find wiring diagrams and scale drawings from page 407 397 Flow sensors Type Ub / Tolerance Current consumpt. Power consumpt. [V] / [%] [mA] [VA] Power-on delay time [s] Output when flow is present Output when temperature is exceeded Output in case of wire break Drawing no. Order no. 10...80 relay energised – relay de-energised 33 SN0151* 10...80 relay energised relay energised relay de-energised 33 SR0150* 10...80 relay energised – relay de-energised 33 SR0153* – – 34 SR5900 – – 35 SR5906* Combicon connector · Wiring diagram no. 20 90...240 AC / -5 /+10 – 4 Combicon connector · Wiring diagram no. 21 24 DC / +10 / -20 90 – Combicon connector · Wiring diagram no. 22 24 DC / +10 / -10 90 – M12 connector · Wiring diagram no. 4 · Connector groups 9, 10, 11, 107, 108, 110, 135 19...36 DC 70 – 10 no / nc programmable 1/2“ UNF-Connector · Wiring diagram no. 6 · Connector group 27 85...265 AC / -5 / +10 – < 3.5 10 no / nc programmable * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Flow sensors for connection to control monitors with ATEX approval Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating Drawing no. Order no. [cm/s] [cm/s] [°C] [s] [K/min] [bar] 3...300 / 200...2000 3...60 / 200...800 -20...60 1...10 15 300 36 SF111A 3...300 / 200...2000 3...60 / 200...800 -20...60 1...10 15 300 37 SF211A 3...300 / 200...2000 3...60 / 200...800 -20...60 1...10 15 300 38 SF311A 3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 39 SF121A Cable 6 m · Wiring diagram no. 12 Product selectors and further information can be found at: www.ifm.com 398 Flow sensors Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating Drawing no. Order no. [cm/s] [cm/s] [°C] [s] [K/min] [bar] 3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 40 SF221A 3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 41 SF321A Cable 6 m · Wiring diagram no. 12 M12 connector · Wiring diagram no. 13 · Connector group 133 3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 42 SF120A 3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 43 SF220A 3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 44 SF320A 3...300 / 200...3000 3...60 / 200...800 -20...70 1...10 15 30 20 SF620A Flow sensors for connection to control monitors with ATEX approval, ceramic housing Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Max. T0 gradient Pressure rating Drawing no. Order no. [cm/s] [cm/s] [°C] [s] [K/min] [bar] 3...60 / - 3...40 / - 5...70 / - 2...20 7 30 31 SF223A 3...60 / - 3...40 / - 5...70 / - 2...20 7 30 32 SF323A Cable 6 m · Wiring diagram no. 12 You can find wiring diagrams and scale drawings from page 407 399 Flow sensors Control monitors with ATEX approval Type Ub / Tolerance Current consumpt. Power consumpt. Output when flow is present Output when temperature is exceeded Output in case of wire break Drawing no. Order no. [VA] Power-on delay time [s] [V] / [%] [mA] 230 AC / ± 10 – 5 30 relay energised – relay de-energised 45 SN2301* 110 AC / ± 10 – 5 30 relay energised – relay de-energised 45 SN2302* 24 DC / ± 10 125 – 30 relay energised – relay de-energised 45 SR2301* 15 terminals...2.5 mm² * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting), Place the fuse outside the hazardous area. Recommendation: check the unit for reliable function after a short circuit. Air flow monitors Type Setting range liquids / gases Greatest sensitivity Medium temperature Response time Ub / tolerance Drawing no. Order no. [cm/s] [cm/s] [°C] [s] [V] / [%] 100...400 -10...50 3...60 80...250 AC/DC 46 SL0101* 100...400 -10...50 3...60 24 AC 46 SL0201* 100...400 -10...50 3...60 24 DC ± 25 % 46 SL5101 Cable 2 m · Wiring diagram no. 14 100...1000 Cable 2 m · Wiring diagram no. 15 100...1000 Cable 2 m · Wiring diagram no. 16 100...1000 * Note for AC and AC/DC units Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a short circuit. Product selectors and further information can be found at: www.ifm.com 400 Flow sensors Compressed air meters Type Process connection Setting range Accuracy within measuring range [Nm3/h] Pressure rating Response time Ub [bar] [s] [V] Drawing no. Order no. Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · Wiring diagram no. 23 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ (DN8) 0.14...15.00 A): ± (3% MW + 0.3% MEW) / B): ± (6% MW + 0.6% MEW) * 16 < 0.1 19...30 47 SD5000 R½ (DN15) 0.7...75.0 A): ± (3% MW + 0.3% MEW) / B): ± (6% MW + 0.6% MEW) * 16 < 0.1 19...30 48 SD6000 G½ (DN15) 0.7...75.0 ± (15% MW + 1.5% MEW) * 16 < 0.1 19...30 49 SD6050 R1 (DN25) 2.0...225.0 A): ± (3% MW + 0.3% MEW) / B): ± (6% MW + 0.6% MEW) * 16 < 0.1 19...30 50 SD8000 R1½ (DN40) 3.5...410.0 A): ± (3% MW + 0.3% MEW) / B): ± (6% MW + 0.6% MEW) * 16 < 0.1 19...30 51 SD9000 R2 (DN50) 6...700 A): ± (3% MW + 0.3% MEW) / B): ± (6% MW + 0.6% MEW) * 16 < 0.1 19...30 52 SD2000 Drawing no. Order no. Compressed air meter for special gases Type Process connection Setting range Medium temperature Pressure rating Response time Ub [Nm3/h] [°C] [bar] [s] [V] Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · Wiring diagram no. 23 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ (DN8) Ar: 0.08...24.54 / CO2: 0.047 (0.04)...14.38 / N2: 0.05 (0.06)...14.94 0...60 16 < 0.1 19...30 47 SD5100 R½ (DN15) Ar: 0.39 (0.4)...118.2 / CO2: 0.24 (0.2)...71.7 / N2: 0.24 (0.2)...73.0 0...60 16 < 0.1 19...30 53 SD6100 Inline sensor for small dosing quantities of water and aqueous solutions Type Process connection Measuring range Display range [ml/min] [ml/min] Pressure rating Medium temp. [bar] [°C] Drawing no. Order no. 54 SQ0500 M12 connector · Wiring diagram no. 23 · Connector groups 9, 10, 11, 107, 108, 110, 135 G1/8 1...200 0...240 10 0...60 You can find wiring diagrams and scale drawings from page 407 401 Flow sensors Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) Type Process connection Measuring range Medium temperature Pressure rating Response time Ub [l/min] [°C] [bar] [s] [V] Drawing no. Order no. Output 2 x normally open / closed programmable · Wiring diagram no. 17 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 55 SU7200 G1 0.2...100.0 -10...80 16 < 0.250 19...30 56 SU8200 Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 55 SU7000 G1 0.2...100.0 -10...80 16 < 0.250 19...30 56 SU8000 G1¼ 0.4...200.0 -10...80 16 < 0.250 19...30 57 SU9000 19...30 57 SU9004 Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 9, 11, 107, 108, 135 G1¼ 0.0...200.0 -10...80 16 < 0.250 Accessories for flow sensors and control monitors Type Description T-piece · R½ - M26 x 1.5 - R½ · for sensors and adapters with process connection M26 x 1.5 · Flow rate: 0...10 l/min · Housing materials: stainless steel 316L / 1.4404 E40136 Progressive ring T-piece DIN 2353 · QL 18-18-18 · for sensors and adapters with process connection M26 x 1.5 · Recommendation: precision steel pipes 18 x 1.5 to DIN 2391/ISO 3304 · Housing materials: stainless steel 316Ti / 1.4571 E40078 Progressive ring T-piece DIN 2353 · QL 22-18-22 · for sensors and adapters with process connection M26 x 1.5 · Recommendation: precision steel pipes 22 x 1.5 to DIN 2391/ISO 3304 · Housing materials: stainless steel 316Ti / 1.4571 E40079 Progressive ring T-piece DIN 2353 · QL 28-18-28 · for sensors and adapters with process connection M26 x 1.5 · Recommendation: precision steel pipes 28 x 1.5 to DIN 2391/ISO 3304 · Housing materials: brass E40083 Adapter block · D10 / G ¼ · for flow sensors type SID, SF5 · Optimised for flow rate · 0.2...2 l/min (SI1xxx) 0.2...3 l/min (SI5xxx) · Housing materials: stainless steel 316L / 1.4404 E40161 Product selectors and further information can be found at: www.ifm.com 402 Order no. Flow sensors Type Description Order no. Adapter block · D15 / G ½ · for flow sensors type SID, SF5 · Optimised for flow rate · 0.5...5 l/min (SI1xxx) 0.5...7 l/min (SI5xxx) · Housing materials: stainless steel 316L / 1.4404 E40162 Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: titanium E40114 Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40115 Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials: nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A E40104 Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404 E40101 Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40100 Adapter · M18 x 1.5 - ¼" NPT · Insertion depth of the probe of SID, SFD, TN: · 13.9 mm · Housing materials: stainless steel 316L / 1.4404 E40106 Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404 E40099 Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098 Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096 Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: brass E40097 Mounting adapter · M18 x 1.5 - Ø 23 mm · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: PE-100 E40138 Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel 316L / 1.4404 E40124 Flow adapter (for low flow rates) · M12 x 1 - G 1/8 · for flow sensors and compact flow monitors with adapter · Housing materials: stainless steel 316L / 1.4404 E40129 You can find wiring diagrams and scale drawings from page 407 403 Flow sensors Type Description Order no. Combicon connector · with cage clamps 4 poles · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 5 E40171 Protective cover · for flow sensors type SI5xxx, SI6xxx, SR59xx · Housing materials: PP uncoloured E40203 Flange adapters for flow sensors Type Description Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33201 Aseptoflex Vario adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33202 Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33701 Aseptoflex Vario adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33702 Aseptoflex Vario adapter · pipe fitting · DN32 (1.25") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33211 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33212 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33213 Aseptoflex Vario adapter · pipe fitting · DN32 (1.25") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33711 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33712 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33713 Aseptoflex Vario adapter · Varivent type F · DN25 (1"), D = 50 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33221 Product selectors and further information can be found at: www.ifm.com 404 Order no. Flow sensors Type Description Order no. Aseptoflex Vario adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33222 Aseptoflex Vario adapter · Varivent type F · DN25 (1"), D = 50 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33721 Aseptoflex Vario adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33722 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · SMS · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33731 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · SMS · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33732 Aseptoflex Vario adapter · flange · DRD · D = 65 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33242 Welding adapter · Ø 50 mm · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E30122 Accessories for airflow monitors Type Description Mounting clamp · Ø 23 mm · for air flow monitor SLG · Housing materials: PBT Order no. E40048 Accessories for volumetric flow sensors Type Description Order no. Adapter · G ½ - R ½ · R ½ · for flow monitor type SM6 · flat seal · Housing materials: stainless steel 316Ti / 1.4571 · Pack quantity: 2 E40199 Adapter · G ½ - G ¾ · G ½ · for flow monitor type SM6 · flat seal · Housing materials: high-grade stainless steel E40189 Adapter · G ¾ - R ½ · for flow monitor type SM7 / SU7 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40178 You can find wiring diagrams and scale drawings from page 407 405 Flow sensors Type Description Order no. Adapter · G 1 - R ½ · for flow monitor type SM8 / SU8 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40179 Adapter · G 1 - R ¾ · for flow monitor type SM8 / SU8 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40180 Adapter · G ¾ I - R½ · for flow monitor type SM7 / SU7 · Housing materials: brass · Pack quantity: 2 E40151 Adapter · G 1 - R¾ · for flow monitor type SM8 / SU8 · Housing materials: brass · Pack quantity: 2 E40153 Adapter · G 1¼ - R 1 · for flow monitor type SU9 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40205 Adapter · G ½ - G ½ · for flow monitor type SM6 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40213 Adapter · G ¾ - G ½ · for flow monitor type SM7 / SU7 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40214 Adapter · G 1 - G ¾ · for flow monitor type SM8 / SU8 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40215 Adapter · G ¾ - G ¾ · for flow monitor type SM7 / SU7 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40216 Adapter · G 1 - G 1 · for flow monitor type SM8 / SU8 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40217 Grounding clamps for magnetic-inductive volumetric flow sensors Type Description Grounding clamp G½ · for flow monitor type SM6 · Housing materials: stainless steel E40196 Grounding clamp G ¾ · for flow monitor type SM7 · Housing materials: stainless steel E40197 Grounding clamp G 1 · for flow monitor type SM8 · Housing materials: stainless steel E40198 Product selectors and further information can be found at: www.ifm.com 406 Order no. Flow sensors Wiring diagrams Core colours BN brown BU blue 10 1 BK black WH white GY 5 15 L+ 4 2 WH BN 3 BU BK L1 1 BN 2 S2 S1 3 L grey 4 BK WH 5 GY BU N 1 6 1 BN 2 WH 4 BK 3 BU 11 L+ 1 OUT2/InD 2 OUT1 3 L 4 16 L1 N 5 WH BN BU BK n.c. BN BK WH Out GY BU L+ L 2 7 12 1 BN L+ 2: OUT2 4: OUT1 17 2 1 4 4 3 WH P 2 2: Out 2 4: Out 1 7 BU L+ 4 3 VS2000 Exi L 2 1 2 GY 3 L 1 BK L+ 8 3 L 9 3 8 1 13 1 BN L+ 4 1 4 BK n.c. 1 2 2 5 GY L+ 4 3 L 3 VS2000 Exi 2 WH 3 L 3 BU 7 8 9 4 9 1 14 BN L+ 1 4 3 L1 L+ BK L+ 2 L 3 WH L BU 18 N L 19 1 1 L+ 2 2 4 2: Out 2 4: Out 1 3 1 2: Out 2 4: Out 1 3 1 L+ L N 1 L 2 L+ 2: Out 2 4: Out 1 3 2 5 17 WH 2 6 18 BU 3 7 19 BN 1 8 20 BK 4 9 21 GY 5 10 2 L 1 4 4 4 3 AC 4 L 2 2: Out 2 4: Out 1 L+ L 3 11 12 22 4 23 5 24 407 Flow sensors Wiring diagrams 20 22 AC L N 1 L+ DC L 2 2 2 4 4 1 1 5 17 WH 2 5 17 WH 2 6 18 BU 3 6 18 BU 3 7 19 BN 1 7 19 BN 1 8 20 BK 4 8 20 BK 4 9 21 GY 5 9 21 GY 5 10 1 2 10 22 22 4 4 3 23 11 3 5 24 12 23 11 5 24 12 21 23 L+ DC L 1 2 1 2 17 2 18 BU 3 7 19 BN 1 8 20 BK 4 9 21 GY 5 6 10 3 L+ L+ 2 2 WH 5 1 1 4 4 4 4: Out 1 2: Out 2 3 L 4: Out 1 2: Out 2 3 L 22 4 11 23 5 12 24 Scale drawings / drawing no. – CAD download: www.ifm.com 3 1 110 73 G1 16 19 M12 x1 M12 x1 2 M12 x1 M12 x1 4 110 73 54 G1 2 G1 2 54 G 34 G3 4 110 73 16 19 M12 x1 M12 x1 Product selectors and further information can be found at: www.ifm.com 408 54 G1 54 G1 2 G1 2 110 73 M12 x1 M12 x1 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 9 5 110 73 2 1 54 63 20UNF 2A 27 1 2" G 34 G3 4 50 14 60 65 M12 x1 M12 x1 45 22 3 6 110 73 113 19 8,2 54 G1 G1 1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm 10 19 2 1 M12 x1 M12 x1 34 49 M12 x1 7 102 2 1 63 M12 x1 37 27 18 68 50 32 3 14 60 65 1: 7-segment LED display, 2: Programming buttons, 3: internal thread M26 x 1.5 45 22 3 14 113 36 11 7,7 1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm 50 63 M12 x1 27 8 2 1 63 15 71 M12 x1 2 27 119 50 4 7,7 60 65 14 113 20 34 45 22 3 1: LED display, 2: setting pushbutton, 3: G1/Aseptoflex Vario thread 8,2 1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm 409 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 15 12 26 63 89 15 G1 2 40 2 137 80 62 6,3 34 4 6 40 15 38 68 80 7,7 10,8 16 1: LED display, 2: setting pushbutton, 3: G1/Aseptoflex Vario thread 32 M12 x1 27 Rp 3 4 63 Rp 3 4 50 97...105,5 13 13 13 76,5 154 2 113...123,5 4 106 15 17 102...109 55 34 15 27 Rp 1 2 Rp 1 2 7,7 10,8 1: LED display, 2: setting pushbutton, 3: G1/Aseptoflex Vario thread 13 13 18 66,5 14 113...123,5 30 18 26 G 12 40 80 Rp 1 G 12 62 Rp 1 150...167 24 6,3 106...112 42 G1 2 6 40 68 80 Product selectors and further information can be found at: www.ifm.com 410 124,5 24 M12 x1 27 G1 2 G1 2 50 17 17 91,5 120...129 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 24 19 86 72 14 Rp 11 2 Rp 11 2 8,2 121...127,5 56 44 22 1 19 1: internal thread M18 x 1.5 25 20 20 121,5 137...146,5 102 64 M12x1 8,2 10 14 20 217 146 45 7,7 25 20 11 22 10 M12x1 15 26 132 21 94 8,2 10 14 45 10 M12x1 15 7,7 26 M12x1 132 11 22 22 27 182 82 72 144 8,2 10 14 8,2 M12 x1 M12x1 44 14 22 1 19 11 1: internal thread M18 x 1.5 22 28 23 282 14 M12x1 55 15 7,7 M12 x1 8,2 14 244 8,2 10 92 82 11 19 22 22 1 29 internal thread M18 x 1.5 52 13 27 G1 4 M12 x1 8,6 12 17 1 1: tightening torque max. 8 Nm 411 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 35 30 72 2 1 45 15 15,5 50 48 52 20UNF 2A 27 G1 2 27 M12 x1 8,6 64 1 2" 83 15 1 1: tightening torque max. 30 Nm 3 31 19,7 4 52 13 27 1: LED display, 2: setting pushbutton, 3: connection for voltage supply and output signals, 4: connection for flow sensor G1 4 12 36 8,6 17 1 55 13 1: tightening torque max. 8 Nm 27 M12 x1 8,2 12 32 76,5 15 17 45 37 G1 2 27 8,6 15,5 55 15 1 13 27 8,2 12 G1 4 1: tightening torque max. 30 Nm 33 17 25 103,5 LEDs 38 1 2 3 4 5 6 7 8 9 10 11 12 75 15 45 100 35,5 G1 2 8,2 12 LEDs 27 1 2 17 18 19 20 39 21 22 23 24 55 13 1: Potentiometer (switch point flow), 2: Potentiometer (switch point temperature) 27 M12 x1 7,7 12 34 17 2 1 50 64 55 13 27 12 G1 4 7,7 83 48 52 M12 x1 27 40 3 17 19,7 4 1: LED display, 2: setting pushbutton, 3: connection for voltage supply and output signals, 4: connection for flow sensor Product selectors and further information can be found at: www.ifm.com 412 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 47 41 75 15 45 2 1 12 111 100 G1 2 M12 x1 7,7 45 74,5 3 1 G /4 31 21,3 1 G /4 27 42 60 20 182,3 52 27 13 1: 4-digit alphanumeric display, 2: Programming buttons, 3: hole for M5 fixing screw M12 x1 M12 x1 7,7 12 48 17 111 100 45 M12 x1 43 52 27 21,3 14 R1 2 G1 4 M12 x1 7,7 12 79,5 13 17 160 40 300 44 1: 4-digit alphanumeric display, 2: Programming buttons 75 15 45 49 G1 2 M12 x1 7,7 12 111 100 45 M12 x1 27 79,5 45 120 45 1 2 3 7 8 9 78 35,5 G1 2 + 1: 4-digit alphanumeric display, 2: Programming buttons 13 14 15 19 20 21 16 17 18 50 1 1 2 111 100 45 M12 x1 1: mounting on DIN rail 88,5 46 pot. 33,7 R1 27,3 2 LED 140 133 375 475 113 32 1: 4-digit alphanumeric display, 2: Programming buttons 23 2 LED 413 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 54 51 2 117 111 100 111 100 G1 8 56 65 39 120 42 R11 2 45 M12 x1 45 M12 x1 1 275 475 48 125 1: 4-digit alphanumeric display, 2: Programming buttons 4,5 1 2 37 10 52 111 100 M12 x1 45 114 R2 51 133 54 1: 4-digit alphanumeric display, 2: Programming buttons, 3: flow conditioner 275 475 55 1: 4-digit alphanumeric display, 2: Programming buttons 110 96 80,5 53 2 M12 x1 M12 x1 76,8 G34 100 111 100 45 G3 4 1 R 16,1 21,3 210 300 1: 4-digit alphanumeric display, 2: Programming buttons installation length with pipe adapter E40151 / E40154: 185 mm 56 80,5 M12 x1 G1 100 G1 130 96 installation length with pipe adapter E40152 / E40155: 205 mm, installation length with pipe adapter E40153 / E40156: 215 mm Product selectors and further information can be found at: www.ifm.com 414 Flow sensors Scale drawings / drawing no. – CAD download: www.ifm.com 57 80,5 130 96 M12 x1 G11 4 100 G11 4 48 26 415 Pressure sensors Transmitters or sensors with integrated control monitor. Units with special design for hygienic applications. Measuring principles with overload protection and a good long-term stability. Measuring range from -1…600 bar. Variable process connection and sealing technology via adapter. Pressure sensors ifm offers a wide range of electronic pressure and vacuum sensors to meet the requirements of various industrial applications. The ceramic-capacitive measuring cell, tried and tested a million times, is complemented by a stainless steel measuring cell with thick-film wire strain gauges (series PK, PV, PT) and a piezoresistive measuring technique (for pneumatic applications). All units have robust housings and do not require moving parts such as pistons or springs. The result: the sensors are extremely shock and vibration resistant and operate without any wear or maintenance. The tried and tested ceramic-capacitive measuring principle is corrosion-resistant and long-term stable. In the long run this guarantees continuous accuracy of the measured values. The sensors are resistant to dynamic pressure peaks and guarantee high overload resistance even in the case of extreme pressure peaks that occur for example with fast closing valves. Local display: the clearly readable LED display shows the current system pressure. Units with wire strain gauge in thick-film technology on a stainless steel measuring cell are distinguished by their very compact and robust design. They can be used in almost all industrial areas. The welded stainless steel measuring cell without any seals ensures a high degree of safety, in particular for applications with gas pressures of up to 400 bar as well as in air-conditioning and refrigerating technology where aggressive coolants (freons) are used. Separate display / programming unit PP2001. 416 Pressure sensors System overview Page Sensors with switching outputs and analogue outputs and display 418 - 419 Sensors with switching outputs and display 419 - 421 Electronic contact manometers with switching output and analogue output 421 - 422 PK sensors with mechanical setting and switching outputs 422 - 424 PT sensors for industrial applications with analogue outputs 424 PP sensors for mobile applications with switching outputs, IO-Link 425 PT sensors for mobile applications with analogue outputs 425 - 426 PA / PPA sensors for industrial applications with analogue outputs / AS-i 426 - 428 Part seat monitoring 428 Sensors for hydrostatic level monitoring 428 Sensors for hydrostatic level monitoring ATEX category 1G/1D 429 PNI sensors with analogue input 429 Sensors with ATEX approval 3D 429 Sensors with ATEX approval 3D/3G 429 - 430 Sensors for pneumatic applications 430 PI sensors for hygienic and wet areas with switching and analogue output 430 PI sensors with 2 switching outputs for hygienic and wet areas 431 Full metal sensors for hygienic and wet areas with switching output and analogue output, IO-Link 431 - 432 Electronic contact manometers for hygienic and wet areas with switching output and analogue output 432 - 433 PF sensors for hygienic and wet areas with switching and analogue output 433 - 434 PL / PM sensors without display for hygienic and wet areas with analogue output 434 - 436 PE sensors with display with 2 switching outputs or switching and analogue output 436 - 437 Fixing components for pressure sensors 437 Accessories and software 437 - 438 Adapters and accessories for adapters 438 - 439 Flange adapters 440 - 442 Wiring diagrams 443 - 444 Scale drawings / drawing no. – CAD download: www.ifm.com 444 - 450 417 Pressure sensors Sensors with switching outputs and analogue outputs and display Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. 1 PY2068 M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ I Display unit -0.25...0.25 10 30 18...32 M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 15 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ I Display unit 0...400 600 1000 20...30 2 PN2020 G¼ I Display unit 0...250 400 850 20...30 3 PN2021 G¼ I Display unit 0...100 300 650 20...30 3 PN2022 G¼ I Display unit -1...25 100 350 20...30 3 PN2023 G¼ I Display unit -1...10 75 150 18...32 3 PN2024 G¼ I Display unit -0.1253...2.5 20 50 18...32 3 PN2026 G¼ I Display unit -0.05...1 10 30 18...32 3 PN2027 G¼ I Display unit -1...1 20 50 20...30 3 PN2009 G¼ I Display unit -0.0125...0.25 10 30 18...32 3 PN2028 ¼" NPT Display unit -1...1 20 50 20...30 4 PN2209 ¼" NPT Display unit 0...400 600 1000 20...30 5 PN2220 ¼" NPT Display unit 0...250 400 850 20...30 4 PN2221 ¼" NPT Display unit 0...100 300 650 20...30 4 PN2222 ¼" NPT Display unit -1...25 100 350 20...30 4 PN2223 Product selectors and further information can be found at: www.ifm.com 418 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 15 · Connector groups 9, 10, 11, 107, 108, 110, 135 ¼" NPT Display unit -1...10 75 150 18...32 4 PN2224 ¼" NPT Display unit -0.125...2.5 20 50 20...30 4 PN2226 ¼" NPT Display unit -0.0125...0.25 10 30 18...32 4 PN2228 M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ I Display unit 0...600 800 1200 18...36 6 PN3060 G¼ I Display unit 0...400 600 1000 18...36 6 PN3000 G¼ I Display unit 0...250 400 850 18...36 1 PN3001 G¼ I Display unit 0...100 300 650 18...36 1 PN3002 G¼ I Display unit 0...25 150 350 18...36 1 PN3003 G¼ I Display unit -1...10 75 150 18...36 1 PN3004 G¼ I Display unit 0...2.5 20 50 18...36 1 PN3006 G¼ I Display unit 0...1 10 30 18...36 1 PN3007 G¼ I Display unit -1...0 10 30 18...36 1 PN3029 Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] Sensors with switching outputs and display Type Process connection Display LED M12 connector · Output function G¼ I Measuring range [bar] · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 107, 108, 110, 135 Display unit 0...400 600 1000 18...36 6 PN5000 You can find wiring diagrams and scale drawings from page 443 419 Pressure sensors Type Process connection Display LED M12 connector · Output function 135, 136 Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 12, 107, 108, 109, 110, G¼ I Display unit 0...250 400 850 18...36 1 PN5001 G¼ I Display unit 0...100 300 650 18...36 1 PN5002 G¼ I Display unit 0...25 150 350 18...36 1 PN5003 G¼ I Display unit -1...10 75 150 18...36 1 PN5004 G¼ I Display unit 0...2.5 20 50 18...36 1 PN5006 G¼ I Display unit 0...1 10 30 18...36 1 PN5007 M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 9, 10, 11, 107, 108, 110, 135 ¼" NPT Display unit 0...400 600 1000 18...36 7 PN5200 ¼" NPT Display unit 0...100 300 650 18...36 8 PN5202 ¼" NPT Display unit -1...10 75 150 18...36 8 PN5204 M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 16 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ I Display unit 0...600 800 1200 18...36 6 PN7060 G¼ I Display unit 0...400 600 1000 18...36 6 PN7000 G¼ I Display unit 0...250 400 850 18...36 1 PN7001 G¼ I Display unit 0...100 300 650 18...36 1 PN7002 G¼ I Display unit 0...25 150 350 18...36 1 PN7003 G¼ I Display unit -1...10 75 150 18...36 1 PN7004 Product selectors and further information can be found at: www.ifm.com 420 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 16 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ I Display unit 0...2.5 20 50 18...36 1 PN7006 G¼ I Display unit 0...1 10 30 18...36 1 PN7007 G¼ I Display unit -1...1 20 50 18...36 1 PN7009 ¼" NPT Display unit 0...400 600 1000 18...36 7 PN7200 ¼" NPT Display unit 0...250 400 850 18...36 8 PN7201 ¼" NPT Display unit 0...100 300 650 18...36 8 PN7202 ¼" NPT Display unit 0...25 150 350 18...36 8 PN7203 ¼" NPT Display unit -1...10 75 150 18...36 8 PN7204 ¼" NPT Display unit 0...2.5 20 50 18...36 8 PN7206 ¼" NPT Display unit -1...1 20 50 18...36 8 PN7209 Drawing no. Order no. Electronic contact manometers with switching output and analogue output Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 G½ Display unit 0...400 800 1200 18...32 9 PG2450 G½ Display unit 0...250 600 1000 18...32 9 PG2451 G½ Display unit 0...100 300 700 18...32 9 PG2452 You can find wiring diagrams and scale drawings from page 443 421 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 G½ Display unit -1...25 100 300 18...32 9 PG2453 G½ Display unit -1...10 50 150 18...32 9 PG2454 G½ Display unit -1...4 30 100 18...32 9 PG2455 G½ Display unit -0.125...2.5 20 50 18...32 9 PG2456 G½ Display unit -0.05...1 10 30 18...32 9 PG2457 G½ Display unit -0.0125...0.25 10 30 18...32 9 PG2458 G½ Display unit -0.005...0.1 4 30 18...32 9 PG2489 G½ Display unit -1...1 10 30 18...32 9 PG2409 Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] PK sensors with mechanical setting and switching outputs Type Process connection Display LED M12 connector · Output function Measuring range [bar] · DC PNP · Wiring diagram no. 2 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ A / M5 I Operation 0...400 600 1600 9.6...32 10 PK5520 G¼ A / M5 I Operation 0...250 400 1000 9.6...32 10 PK5521 G¼ A / M5 I Operation 0...100 200 1000 9.6...32 10 PK5522 G¼ A / M5 I Operation 0...25 60 500 9.6...32 10 PK5523 G¼ A / M5 I Operation 0...10 25 300 9.6...32 10 PK5524 Product selectors and further information can be found at: www.ifm.com 422 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ A / M5 I Operation 0...400 600 1600 9.6...32 10 PK6520 G¼ A / M5 I Operation 0...250 400 1000 9.6...32 10 PK6521 G¼ A / M5 I Operation 0...100 200 1000 9.6...32 10 PK6522 G¼ A / M5 I Operation 0...25 60 500 9.6...32 10 PK6523 G¼ A / M5 I Operation 0...10 25 300 9.6...32 10 PK6524 M12 connector · Output function · DC PNP · Wiring diagram no. 4 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ A / M5 I Switching status 0...400 600 1600 9.6...32 10 PK7520 G¼ A / M5 I Switching status 0...250 400 1000 9.6...32 10 PK7521 G¼ A / M5 I Switching status 0...100 200 1000 9.6...32 10 PK7522 G¼ A / M5 I Switching status 0...10 25 300 9.6...32 10 PK7524 M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 R¼ A / M5 I Operation 0...100 200 1000 9.6...32 11 PK6732 R¼ A / M5 I Operation 0...10 25 300 9.6...32 11 PK6734 M12 connector · Output function normally open / closed complementary · DC NPN · Wiring diagram no. 5 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 R¼ A / M5 I Operation 0...400 600 1600 9.6...32 11 PK8730 R¼ A / M5 I Operation 0...100 200 1000 9.6...32 11 PK8732 R¼ A / M5 I Operation 0...10 25 300 9.6...32 11 PK8734 You can find wiring diagrams and scale drawings from page 443 423 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 ¼" NPT A / M5 I Operation 0...400 600 1600 9.6...32 12 PK6220 ¼" NPT A / M5 I Operation 0...100 200 1000 9.6...32 12 PK6222 ¼" NPT A / M5 I Operation 0...10 25 300 9.6...32 12 PK6224 Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] PT sensors for industrial applications with analogue outputs Type Process connection Display LED Measuring range [bar] M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector groups 9, 11, 107, 108, 135 G¼ A – 0...400 600 1600 8.5...36 13 PT3540 G¼ A – 0...250 400 1000 8.5...36 13 PT3541 G¼ A – 0...100 200 1000 8.5...36 13 PT3542 G¼ A – 0...25 60 600 8.5...36 13 PT3543 G¼ A – 0...10 25 300 8.5...36 13 PT3544 M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 9, 11, 107, 108, 135 G¼ A – 0...400 600 1600 16...36 13 PT9540 G¼ A – 0...250 400 1000 16...36 13 PT9541 G¼ A – 0...100 200 1000 16...36 13 PT9542 G¼ A – 0...25 60 600 16...36 13 PT9543 G¼ A – 0...10 25 300 16...36 13 PT9544 Product selectors and further information can be found at: www.ifm.com 424 Pressure sensors PP sensors for mobile applications with switching outputs, IO-Link Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ A / M5 I Operation 0...400 600 1000 9.6...36 14 PP7550 G¼ A / M5 I Operation 0...250 400 850 9.6...36 14 PP7551 G¼ A / M5 I Operation 0...100 300 650 9.6...36 15 PP7552 G¼ A / M5 I Operation 0...25 150 350 9.6...36 16 PP7553 G¼ A / M5 I Operation -1...10 75 150 9.6...36 16 PP7554 G¼ A / M5 I Operation 0...2.5 20 50 9.6...36 16 PP7556 M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC NPN · Wiring diagram no. 8 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ A / M5 I Operation 0...400 600 1000 9.6...36 14 PP0520 G¼ A / M5 I Operation 0...250 400 850 9.6...36 14 PP0521 G¼ A / M5 I Operation 0...100 300 650 9.6...36 15 PP0522 G¼ A / M5 I Operation 0...25 150 350 9.6...36 16 PP0523 G¼ A / M5 I Operation -1...10 75 150 9.6...36 16 PP0524 Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] 8.5...36 13 PT3550 PT sensors for mobile applications with analogue outputs Type Process connection Display LED Measuring range [bar] M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector group 135 G¼ A – 0...400 600 1600 You can find wiring diagrams and scale drawings from page 443 425 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector group 135 G¼ A – 0...250 400 1000 8.5...36 13 PT3551 G¼ A – 0...100 200 1000 8.5...36 13 PT3552 G¼ A – 0...25 60 600 8.5...36 13 PT3553 G¼ A – 0...10 25 300 8.5...36 13 PT3554 M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector group 135 G¼ A – 0...400 600 1600 16...36 13 PT9550 G¼ A – 0...250 400 1000 16...36 13 PT9551 G¼ A – 0...100 200 1000 16...36 13 PT9552 G¼ A – 0...25 60 600 16...36 13 PT9553 G¼ A – 0...10 25 300 16...36 13 PT9554 Ub DC [V] Drawing no. Order no. PA / PPA sensors for industrial applications with analogue outputs / AS-i Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...600 800 1200 9.6...32 17 PA3060 G¼ I – 0...400 600 1000 9.6...32 18 PA3020 G¼ I – 0...250 400 850 9.6...32 18 PA3021 G¼ I – 0...100 300 650 9.6...32 19 PA3022 Product selectors and further information can be found at: www.ifm.com 426 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...25 150 350 9.6...32 19 PA3023 G¼ I – 0...10 75 150 9.6...32 19 PA3024 G¼ I – 0...2.5 20 50 9.6...32 19 PA3026 G¼ I – 0...1 10 30 9.6...32 19 PA3027 G¼ I – 0...0.25 10 30 9.6...32 19 PA3028 G¼ I – -1...0 10 30 9.6...32 19 PA3029 G¼ A / M5 I – 0...250 400 850 9.6...32 20 PA3521 G¼ A / M5 I – 0...25 150 350 9.6...32 20 PA3523 G¼ A / M5 I – 0...10 75 150 9.6...32 20 PA3524 G¼ A / M5 I – 0...2.5 20 50 9.6...32 20 PA3526 G¼ A / M5 I – 0...0.25 10 30 9.6...32 20 PA3528 M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...600 800 1200 16...32 21 PA9060 G¼ I – 0...400 600 1000 16...32 21 PA9020 G¼ I – 0...250 400 850 16...32 19 PA9021 G¼ I – 0...100 300 650 16...32 19 PA9022 You can find wiring diagrams and scale drawings from page 443 427 Pressure sensors Type Process connection Display Measuring range [bar] LED Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...25 150 350 16...32 19 PA9023 G¼ I – 0...10 75 150 16...32 19 PA9024 G¼ I – 0...2.5 20 50 16...32 19 PA9026 G¼ I – 0...1 10 30 16...32 19 PA9027 G¼ I – 0...0.25 10 30 16...32 19 PA9028 G¼ I – -1...0 10 30 16...32 19 PA9029 1000 18...31.6 22 PPA020 M12 connector · AS-i · Wiring diagram no. 9 · Connector groups 9, 11, 107, 108, 135 G¼ I - 0...400 600 Part seat monitoring Type Description Order no. Control unit for part seat monitoring · Setting by adjustment of the pneumatic bridge · Integrated pressure sensor with 2 switching outputs · and 4-digit alphanumerical display for trend display or display of current pressure · Cable PS7570 Sensors for hydrostatic level monitoring Type Measuring range [bar] Cable length / material Poverload Pbursting Drawing no. Order no. min. [bar] Ub DC [V] max. [bar] Output 4...20 mA analogue · Wiring diagram no. 10 0...0.25 5m PUR cable 2 2.4 10...30 23 PS3208 0...0.6 10 m PUR cable 4 4.8 10...30 23 PS3407 0...1 15 m PUR cable 5 6 10...30 23 PS3417 Product selectors and further information can be found at: www.ifm.com 428 Pressure sensors Sensors for hydrostatic level monitoring ATEX category 1G/1D Type Measuring range [bar] Cable length / material Poverload Pbursting Drawing no. Order no. min. [bar] Ub DC [V] max. [bar] Output 4...20 mA analogue · Wiring diagram no. 11 0...0.25 5m FEP cable 2 2.4 10...30 24 PS308A 0...0.6 10 m FEP cable 4 4.8 10...30 24 PS307A 0...1 15 m FEP cable 5 6 10...30 24 PS317A Ub DC [V] Drawing no. Order no. PNI sensors with analogue input Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 16, 17, 18 G¼ I Display unit 0...10 50 150 18...30 1 PNI024 Measuring range [bar] Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] Sensors with ATEX approval 3D Type Process connection Display LED M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DC PNP · Wiring diagram no. 1 · Connector groups 132, 134 G¼ I Display unit 0...2.5 20 50 18...36 25 PN006A M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 16 · Connector groups 132, 134 G¼ I Display unit 0...2.5 20 50 18...36 25 PN016A Measuring range [bar] Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] Sensors with ATEX approval 3D/3G Type Process connection Display LED M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 132, 134 G1 A Display unit -1...25 100 350 18...32 26 PI003A You can find wiring diagrams and scale drawings from page 443 429 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 132, 134 G1 A Display unit -0.0124...0.25 10 30 18...32 26 PI008A Measuring range [bar] Poverload Pbursting min. [bar] Drawing no. Order no. max. [bar] Ub DC [V] Sensors for pneumatic applications Type Process connection Display LED M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 16 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G 1/8 I Display unit -1...1 20 30 18...36 27 PN7809 G 1/8 I Display unit -1...10 20 30 18...36 27 PN7834 M8 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 4 · Connector groups 4, 5, 70 G 1/8 I Display unit -1...1 20 30 18...32 28 PQ7809 G 1/8 I Display unit -1...10 20 30 18...32 28 PQ7834 M8 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC NPN · Wiring diagram no. 13 · Connector groups 4, 5, 70 G 1/8 I Display unit -1...1 20 30 18...32 28 PQ0809 G 1/8 I Display unit -1...10 20 30 18...32 28 PQ0834 Drawing no. Order no. PI sensors for hygienic and wet areas with switching and analogue output Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¾A Display unit -1...10 50 Product selectors and further information can be found at: www.ifm.com 430 150 18...32 29 PI2994 Pressure sensors PI sensors with 2 switching outputs for hygienic and wet areas Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 16 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¾A Display unit -1...25 100 350 18...32 29 PI7993 Full metal sensors for hygienic and wet areas with switching output and analogue output, IOLink Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable) · Wiring diagram no. 17 · Connector groups 9, 10, 11, 107, 108, 110, 135 Aseptoflex Vario Display unit -1...25 100 350 20...32 30 PI2793 Aseptoflex Vario Display unit -1...10 50 150 20...32 30 PI2794 Aseptoflex Vario Display unit -1...4 30 100 20...32 30 PI2795 Aseptoflex Vario Display unit -0.124...2.5 20 50 20...32 30 PI2796 Aseptoflex Vario Display unit -0.05...1 10 30 20...32 30 PI2797 Aseptoflex Vario Display unit -0.0124...0.25 10 30 20...32 30 PI2798 Aseptoflex Vario Display unit -1...1 10 30 20...32 30 PI2799 Aseptoflex Vario Display unit -0.005...0.1 4 30 20...32 30 PI2789 G1 A Display unit -1...25 100 350 20...32 31 PI2893 G1 A Display unit -1...10 50 150 20...32 31 PI2894 G1 A Display unit -1...4 30 100 20...32 31 PI2895 G1 A Display unit -0.124...2.5 20 50 20...32 31 PI2896 You can find wiring diagrams and scale drawings from page 443 431 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable) · Wiring diagram no. 17 · Connector groups 9, 10, 11, 107, 108, 110, 135 G1 A Display unit -0.05...1 10 30 20...32 31 PI2897 G1 A Display unit -0.0124...0.25 10 30 20...32 31 PI2898 G1 A Display unit -1...1 10 30 20...32 31 PI2899 G1 A Display unit -0.005...0.1 4 30 20...32 31 PI2889 Electronic contact manometers for hygienic and wet areas with switching output and analogue output Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 Aseptoflex Vario Display unit -1...25 100 350 18...32 32 PG2793 Aseptoflex Vario Display unit -1...10 50 150 18...32 32 PG2794 Aseptoflex Vario Display unit -1...4 30 100 18...32 32 PG2795 Aseptoflex Vario Display unit -0.124...2.5 20 50 18...32 32 PG2796 Aseptoflex Vario Display unit -0.05...1 10 30 18...32 32 PG2797 Aseptoflex Vario Display unit -0.0124...0.25 10 30 18...32 32 PG2798 Aseptoflex Vario Display unit -1...1 10 30 18...32 32 PG2799 Aseptoflex Vario Display unit -0.005...0.1 4 30 18...32 32 PG2789 G1 A Display unit -1...25 100 350 18...32 33 PG2893 Product selectors and further information can be found at: www.ifm.com 432 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 9, 10, 11, 107, 108, 110, 135 G1 A Display unit -1...10 50 150 18...32 33 PG2894 G1 A Display unit -1...4 30 100 18...32 33 PG2895 G1 A Display unit -0.124...2.5 20 50 18...32 33 PG2896 G1 A Display unit -0.05...1 10 30 18...32 33 PG2897 G1 A Display unit -0.0124...0.25 10 30 18...32 33 PG2898 G1 A Display unit -1...1 10 30 18...32 33 PG2899 G1 A Display unit -0.005...0.1 4 30 18...32 33 PG2889 Drawing no. Order no. PF sensors for hygienic and wet areas with switching and analogue output Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 15 · Connector groups 9, 10, 11, 107, 108, 110, 135 Aseptoflex Switching status -1...25 100 350 20...30 34 PF2053 Aseptoflex Switching status -0.5...10 50 150 20...30 34 PF2054 Aseptoflex Switching status -0.13...2.5 20 50 20...30 34 PF2056 Aseptoflex Switching status -0.05...1 10 30 20...30 34 PF2057 Aseptoflex Switching status -0.013...0.25 10 30 20...30 34 PF2058 G1 A Switching status -1...100 200 650 20...30 35 PF2652 You can find wiring diagrams and scale drawings from page 443 433 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 15 · Connector groups 9, 10, 11, 107, 108, 110, 135 G1 A Switching status -1...25 100 350 20...30 36 PF2653 G1 A Switching status -0.5...10 50 150 20...30 36 PF2654 G1 A Switching status -0.13...2.5 20 50 20...30 36 PF2656 G1 A Switching status -0.05...1 10 30 20...30 36 PF2657 G1 A Switching status -0.013...0.25 10 30 20...30 36 PF2658 G1 A Switching status -0.99...1 20 50 20...30 36 PF2609 G¾A Switching status -1...25 100 200 20...30 37 PF2953 G¾A Switching status -0.5...10 50 150 20...30 37 PF2954 G¾A Switching status -0.13...2.5 20 50 20...30 37 PF2956 G¾A Switching status -0.05...1 10 30 20...30 37 PF2957 Drawing no. Order no. PL / PM sensors without display for hygienic and wet areas with analogue output Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC · Wiring diagram no. 18 · Connector groups 9, 11, 107, 108, 135 Aseptoflex – -1...25 100 350 14...30 38 PL2053 Aseptoflex – -0.5...10 50 150 14...30 38 PL2054 Aseptoflex – -0.13...2.5 20 50 14...30 38 PL2056 Aseptoflex – -0.05...1 10 30 14...30 38 PL2057 Product selectors and further information can be found at: www.ifm.com 434 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC · Wiring diagram no. 18 · Connector groups 9, 11, 107, 108, 135 Aseptoflex – -0.0125...0.25 10 30 14...30 38 PL2058 G1 A – -1...100 200 650 14...30 39 PL2652 G1 A – -1...25 100 350 14...30 40 PL2653 G1 A – -0.5...10 50 150 14...30 40 PL2654 G1 A – -0.13...2.5 20 50 14...30 40 PL2656 G1 A – -0.05...1 10 30 14...30 40 PL2657 G1 A – -0.0125...0.25 10 30 14...30 40 PL2658 M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 18 · Connector groups 9, 11, 107, 108, 135 Aseptoflex – -1...25 100 350 14...30 41 PM2053 Aseptoflex – -0.5...10 50 150 14...30 41 PM2054 Aseptoflex – -0.99...4 30 100 14...30 41 PM2055 Aseptoflex – -0.13...2.5 20 50 14...30 41 PM2056 Aseptoflex – -0.05...1 10 30 14...30 41 PM2057 Aseptoflex – -0.0125...0.25 10 30 14...30 41 PM2058 M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC · Wiring diagram no. 18 · Connector groups 9, 11, 107, 108, 135 G1 A – -1...25 100 350 14...30 42 PM2653 G1 A – -0.5...10 50 150 14...30 42 PM2654 You can find wiring diagrams and scale drawings from page 443 435 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC · Wiring diagram no. 18 · Connector groups 9, 11, 107, 108, 135 G1 A – -0.99...4 30 100 14...30 42 PM2655 G1 A – -0.13...2.5 20 50 14...30 42 PM2656 G1 A – -0.05...1 10 30 14...30 42 PM2657 G1 A – -0.0125...0.25 10 30 14...30 42 PM2658 Drawing no. Order no. PE sensors with display with 2 switching outputs or switching and analogue output Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 16 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ I Display unit -1...1 20 50 18...36 1 PE7009 G¼ I Display unit 0...2.5 20 50 18...36 1 PE7006 G¼ I Display unit -1...10 75 150 18...36 1 PE7004 G¼ I Display unit 0...25 150 350 18...36 1 PE7003 G¼ I Display unit 0...100 300 650 18...36 1 PE7002 M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ I Display unit 0...400 600 1000 18...36 6 PE3000 G¼ I Display unit 0...250 400 850 18...36 1 PE3001 G¼ I Display unit 0...100 300 650 18...36 1 PE3002 G¼ I Display unit 0...25 150 350 18...36 1 PE3003 Product selectors and further information can be found at: www.ifm.com 436 Pressure sensors Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DC PNP · Wiring diagram no. 1 · Connector groups 9, 10, 11, 107, 108, 110, 135 G¼ I Display unit -1...10 75 150 18...36 1 PE3004 G¼ I Display unit 0...2.5 20 50 18...36 1 PE3006 G¼ I Display unit -1...0 10 30 18...36 1 PE3029 G¼ I Display unit -1...1 20 50 18...36 1 PE3009 Fixing components for pressure sensors Type Description Order no. Mounting clamp · Ø 34 mm · Housing materials: PBT E10017 Mounting clamp · Ø 34 mm · Housing materials: PA E10193 Mounting device 2 way · for fluid sensors · Housing materials: POM E30078 Mounting device 3 way · for fluid sensors · Housing materials: POM E30079 Accessories and software Type Description Order no. Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006 Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / Viton / ventilation strip: Teflon film 0.32 mm / O-ring: Viton E30101 Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM E30104 You can find wiring diagrams and scale drawings from page 443 437 Pressure sensors Type Description Order no. Memory plug · Parameter memory for IO-Link sensors · Housing materials: PA PACM 12 / PET / sealing: FPM / nut: stainless steel 316L / 1.4404 / connector: TPU E30398 Teach button · for sensors PP0xE, PP052x, PP755x · for memory plug (E30398) · 0.9 m · Housing materials: stainless steel / PA / PMMA E30405 Programming/ display unit · for EPS and IO-Link sensors · Connector · Housing materials: stainless steel 316L / 1.4404 / PC copolymer / PBT / FPM PP2001 Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK · Housing materials: PP transparent E30094 IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link (4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110) E30396 Cable clamp fastener · for submersible pressure transmitter PS3 · Housing materials: steel / plastics E30399 Filter element · for submersible pressure transmitter PS3 · for fixing on the capillary tube E30400 Splitter box · with ventilation and terminal block · for submersible pressure transmitter PS3 · Housing materials: plastics E30401 Additional weight · for submersible pressure transmitter PS3 · Housing materials: stainless steel 316Ti / 1.4571 E30402 DIN rail clip · Housing materials: stainless steel E37340 Push-in air fitting · QS-G 1/8-6 · with hexagonal socket 4 mm a/f · for tube with Ø 6 mm · Housing materials: steel / PBT / brass / aluminium · Pack quantity: 4 E30076 Push-in air fitting · QS-G 1/8-8 · with hexagonal socket 5 mm a/f · for tube with Ø 8 mm · Housing materials: steel / PBT / brass / aluminium · Pack quantity: 4 E30077 Adapters and accessories for adapters Type Description Adapter · R1/8 - R1/8 · rotatable · Housing materials: brass nickel-plated Product selectors and further information can be found at: www.ifm.com 438 Order no. E37350 Pressure sensors Type Description Order no. T pipe mounting set · G1/2 · with reducer G1/2 - G1/8, adapter R1/8 - R1/8 rotatable, seal G1/2 · Housing materials: brass nickel-plated E37360 Flange adapter · G ¼ · Hole spacing · 31.1 mm · Housing materials: sealing: NBR, acrylonitrile-butadiene-rubber / flange: aluminium / hollow screw: brass E30003 Adapter · G ¼ - G ½ · Housing materials: stainless steel / sealing: FPM E30000 Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007 Adapter · G ¼ - M20 x 1.5 · Housing materials: stainless steel / FPM E30010 Adapter · G ¼ - G ½ · Housing materials: stainless steel / sealing: FPM E30050 Adapter · ¼" NPT - G ¼ · Housing materials: stainless steel 316Ti / 1.4571 E30058 Adapter · ¼" NPT - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30059 Adapter · G ¼ - DN16 · G¼ small flange DIN 28403 DN16 · Housing materials: stainless steel E30065 Flange adapter · G ¼ · for pressure sensors type PP7 / type PK · Housing materials: stainless steel / O-ring: NBR E30063 Adapter · G 1 - G ½ · Housing materials: stainless steel 316L / 1.4404 / sealing: FPM E30116 Damping screw · for pressure sensors with M5 internal thread E30057 O-ring · 24 x 2 · Housing materials: FKM FDA compliant · Pack quantity: 1 E30123 Sealing ring · for Aseptoflex Vario adapter · Housing materials: PEEK FDA compliant · Pack quantity: 1 E30124 You can find wiring diagrams and scale drawings from page 443 439 Pressure sensors Flange adapters Type Description Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33201 Aseptoflex Vario adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33202 Aseptoflex Vario adapter · with leakage port · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33208 Aseptoflex Vario adapter · with leakage port · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33209 Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33701 Aseptoflex Vario adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33702 Aseptoflex Vario adapter · pipe fitting · DN32 (1.25") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33211 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33212 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33213 Aseptoflex Vario adapter · pipe fitting · DN32 (1.25") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33711 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33712 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33713 Aseptoflex Vario adapter · Varivent type F · DN25 (1"), D = 50 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33221 Aseptoflex Vario adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33222 Product selectors and further information can be found at: www.ifm.com 440 Order no. Pressure sensors Type Description Order no. Aseptoflex Vario adapter · with leakage port · Varivent type F · DN25 (1"), D = 50 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33228 Aseptoflex Vario adapter · with leakage port · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33229 Aseptoflex Vario adapter · Varivent type F · DN25 (1"), D = 50 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33721 Aseptoflex Vario adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33722 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · SMS · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33731 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · SMS · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33732 Aseptoflex Vario adapter · flange · DRD · D = 65 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33242 Universal process adapter · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33340 Welding adapter · Ø 50 mm · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E30122 Welding adapter · Ø 50 mm · with leakage port · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E30130 Adapter plug · for Aseptoflex Vario adapter · Housing materials: high-grade stainless steel E30128 Aseptoflex adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001 Aseptoflex adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33002 Aseptoflex adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33012 You can find wiring diagrams and scale drawings from page 443 441 Pressure sensors Type Description Aseptoflex adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33013 Aseptoflex adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33022 Aseptoflex adapter · pipe fitting · DN40 (1.5") · SMS · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33031 Aseptoflex adapter · NEUMO BioConnect flange form V · 4 holes · DN40 · pipe connection to DIN 11866 line A DIN 11850 · Housing materials: stainless steel 316L / 1.4435 E33131 Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052 Adapter plug for welding adapter with Aseptoflex thread · Housing materials: high-grade stainless steel E30064 G 1 adapter · Clamp · 1-1.5" · ISO 2852 · for units with G 1 adaptation · Housing materials: stainless steel 316L / 1.4435 E33601 G 1 adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with G 1 adaptation · Housing materials: stainless steel 316L / 1.4435 E33612 Welding adapter · G 1 - Ø 50 mm · Housing materials: stainless steel 316L / 1.4404 E30013 Welding adapter · G 1 - Ø 50 mm · Housing materials: stainless steel 316L / 1.4404 / O-ring: Viton / O-ring: EPDM E30072 Adapter plug · G 1 · Housing materials: high-grade stainless steel E30070 Welding adapter · G ¾ - Ø 50 mm · Housing materials: stainless steel 316L / 1.4404 E30009 Adapter plug · G ¾ · Housing materials: high-grade stainless steel E30071 Product selectors and further information can be found at: www.ifm.com 442 Order no. Pressure sensors Wiring diagrams Core colours 4 8 BN brown GY grey 1 WH white 4 BU 1 1 L+ 2 2: Out 2 4: Out 1 green 3 L 4 OU1 OUT1/Teach/ Data L 3 L Out 2 3 OUT2 4 L+ 2 OU2 L+ 2 blue GN 12 Out 1 5 10 V In 6 InP2 Uref 7 + In+ 1 5 9 13 1 BN L+ 2 WH 1 4 BK 2 1 L+ 1 AS-i+ 4 3 BU L 2: 4: L+ 2 4 3 3 4: Out 1 2: Out 2 AS-i L 3 L 2 6 1 10 L+ 1 4 3 BN L+ L+ WH L 2 L GY L 3 7 1 11 L+ 2 1 4 4: 2: BN L+ 2 3 L L+ GN 3 14 L BU L 1 16 1 1 L+ 2 4 4 2 3 3 L 1 L+ 1 L+ 2 4 2: Out 2 4: Out 1 L 15 L+ 2 4 3 L 2: Out 2 4: Out 1 3 L 17 1 1 L+ 2 2 4 2: Out 2 4: Out 1 3 1 2: Out 2 4: Out 1 1 1 L+ 2 4 L 2: Out 2 4: Out 1 4 3 1 L+ L L+ 2 4 1 4 2 2 L 2: Out 2 4: Out 1 3 L L 3 L+ OUT2 OUT1 L 3 2 3 2 1 L+ 4 3 L+ P L 443 Pressure sensors Wiring diagrams 18 1 1 L+ L+ 2 2 3 L L Scale drawings / drawing no. – CAD download: www.ifm.com 4 1 2 3 34 3 34 M12 x1 48 91,5 1 21,5 27 57,3 12 14 1,3 57,3 91,5 1 47 M12 x1 2 27 30 G 1/4 / "NPT 14 30 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 2 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 5 2 3 34 3 34 M12 x1 47,8 94,1 1 14 1,3 16,5 59,8 59,6 94,1 1 47,8 M12 x1 2 21,5 27 27 30 G 1/4 30 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 3 / "NPT 14 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 6 3 2 3 34 34 M12 x1 47 94,1 1 59,6 21,5 27 30 21,5 27 G 1/4 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 30 G 1/4 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button Product selectors and further information can be found at: www.ifm.com 444 16,5 1,3 14 1,3 57,3 91,5 1 48 M12 x1 2 Pressure sensors Scale drawings / drawing no. – CAD download: www.ifm.com 10 7 27 M12 x1 3 2 34 59,8 12 94 7,5 1 61,6 71,6 M12 x1 48 12 1 27 30 27 2 M5 G 1/4 1: tightening torque 25 Nm, 2: sealing FPM / DIN 3869-14 / ''NPT 14 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 11 27 M12 x1 8 2 60,6 70,6 3 34 M12 x1 13 7,5 48 1 12 57,3 91,5 1 27 M5 R1 4 1: tightening torque 25 Nm 12 27 30 / ''NPT 14 27 M12 x1 60,6 70,6 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 7,5 9 1 M12 x1 1 13 57 100 M5 27 14 " NPT 1: tightening torque 25 Nm 169 13 22 M12 x1 2 12 22 51,2 65,1 75,5 3 24 G1 2 22 1 G /4 1 1: Analogue display, 2: 4-digit alphanumeric display, 3: Touch button (programming button) 1: sealing FPM / DIN 3869-14, tightening torque 25 Nm 445 Pressure sensors Scale drawings / drawing no. – CAD download: www.ifm.com 14 18 30 M12 x1 1,3 LED 30 12 30 1 M5 1 2 G /4 1: Pressure relief mechanism, No mechanical force must be exerted on the pressure relief mechanism., 2: sealing FPM / DIN 3869-14 15 14 65,5 75 79,5 30 M12 x1 G1 4 21,5 27 1: Pressure relief mechanism, No mechanical force must be exerted on the pressure relief mechanism. 19 30 M12 x1 1,3 12 LED 30 M5 30 1 G /4 1 1: sealing FPM / DIN 3869-14 14 65,5 75 79,5 30 M12 x1 G1 4 21,5 27 20 16 30 M12 x1 14 65,5 79,5 79,5 30 M12 x1 LED 1 2 M5 30 12 30 1 M5 G 1/4 G 1/4 1: sealing FPM / DIN 3869-14 1: ventilation, 2: sealing FPM / DIN 3869-14 21 17 30 M12 x1 1,3 16,5 1,3 16,5 77,5 77,5 30 M12 x1 30 14 G 21,5 27 1: Pressure relief mechanism, No mechanical force must be exerted on the pressure relief mechanism. Product selectors and further information can be found at: www.ifm.com 446 30 G1 4 21,5 27 Pressure sensors Scale drawings / drawing no. – CAD download: www.ifm.com 26 22 30 M12 x1 2 3 39 50,5 90,6 M12 x1 48 36 1 30 95,5 1,3 15,7 132 LED 27 G1 4 21,5 27 36 23 20° 25,4 G1 100 27 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button 27 24 1 10 27 17 8 147 2 25 4 3 34 3 2 49 36 35 48,4 20 35,6 14 1,3 57,3 20 15 52,3 M12 x1 94 1 28,5 30 G 1/4 28,5 21,5 27 86,6 4,5 6 M12x1 5 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 7 M4 1: ventilation connection M5; max. tightening torque 2.5 Nm, 2: main pressure connection G 1/8; tightening torque max. 8 Nm, 3: Programming button, 4: LEDs (display unit / switching status), 5: 4-digit alphanumeric display, 6: for mounting screw M4; max. tightening torque 2.5 Nm, 7: for mounting screw M4; max. tightening torque 2.5 Nm 447 Pressure sensors Scale drawings / drawing no. – CAD download: www.ifm.com 31 28 11,3 2 3 64 M12 x1 20,7 50 20 27,4 45,1 4,75 35 42 105,6 1 46 32 4,2 34 32 G1 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button 30 32 1: main pressure connection G 1/8; tightening torque max. 8 Nm, thread length max: 7.5 mm, 2: for mounting screw M4; max. tightening torque 2.5 Nm, 3: LEDs (display unit / switching status), 4: 4-digit alphanumeric display, 5: Programming button 57 100 M12 x1 1 29 2 3 48 34 M12 x1 153 47 60,5 2 16,8 3 119 1 24 85 G1 20,6 1: Analogue display, 2: 4-digit alphanumeric display, 3: Programming button 36 G3 4 33 1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button 30 100 57 2 M12 x1 1 3 M12 x1 153 64 50 2 60,5 105,8 1 16,8 27 52,8 3 34 G1 34 G1 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button 1: Analogue display, 2: 4-digit alphanumeric display, 3: Touch button (programming button) Product selectors and further information can be found at: www.ifm.com 448 24 Pressure sensors Scale drawings / drawing no. – CAD download: www.ifm.com 37 34 1 2 48 34 2 48 34 46,5 56,5 91,1 15 20,5 51 85,5 M12 x1 46,5 M12 x1 1 36 3 4 36 1: 7-segment LED display, 2: Programming button, 3: Aseptoflex sealing edge, 4: Aseptoflex thread G3 4 1: 7-segment LED display, 2: Programming button 38 35 1 48 34 M12 x1 2 34 27,5 15 58 92 73 87 M12 x1 46,5 2 1 M12 x1 41 25,4 G1 36 20° 1: Aseptoflex thread, 2: Aseptoflex sealing edge 39 1: 7-segment LED display, 2: Programming button 36 34 M12 x1 2 1 48,5 34 25,4 G1 41 20° 1 27,5 63,1 97,4 27 M12 x1 81 95,2 46,5 25,4 G1 41 20° 1: tightening torque 20 Nm 1: 7-segment LED display, 2: Programming button 449 Pressure sensors Scale drawings / drawing no. – CAD download: www.ifm.com 41 40 48 34 M12 x1 27 107 121,5 85,3 99,5 48,5 34 M12 x1 41 20° 15 25,4 G1 1 36 2 1 1: tightening torque 20 Nm 1: Aseptoflex sealing edge, 2: Aseptoflex thread 42 27 117,3 131,5 48 34 M12 x1 25,4 G1 1: tightening torque 20 Nm Product selectors and further information can be found at: www.ifm.com 450 41 1 20° Pressure sensors 451 Temperature sensors Increased process safety due to self-monitoring. Integrated or separate control monitors selectable. Modular concept – tailor-made for every application. Optional fittings for variable connection. Robust construction for high resistance to shock and vibration. Temperature sensors The temperature sensors of ifm electronic are based on a PT100 or PT1000 resistor. The measured temperature value corresponds to a change in resistance and is converted into an electrical analogue signal. A microprocessor controls the evaluation of the electrical signal. The current system temperature is indicated by LEDs directly on the control monitor. The microprocessor and the display make process adjustment much easier. The user can set the values for the switch points, hysteresis and measuring range by means of programming buttons even without the system temperature being applied. This enables installation and setup of the system within a few minutes. The values are safely stored in an EEPROM independent of the supply voltage. Film technology is used for the electronic circuitry. A flexible, temperature-resistant and extremely resistant polyimide film is used as carrier of the SMD components. Together with a special potting method an extreme shock and vibration resistance is achieved. Local display of the current temperature. From sensor to system A complete temperature measurement system usually consists of several components. The temperature in a medium is detected by a sensor and is converted into an electrical measured signal. The mechanical design and the dimensions of the sensors must vary to enable use for different media and measuring points. Depending on the application ifm electronic offers a selection of robust probe sensors or types with connection cables. To indicate and process the measured value the sensor is connected to a separate control monitor. It indicates the measured value on its integrated display. To complete the modular systems ifm electronic offers compact temperature sensors with integrated control monitors. If a local temperature display is not required, temperature transmitters are frequently used. ifm electronic provides units with excellent response time (TA series) that either have standard output signals or an integrated AS-i interface. In hygienic applications the self-monitoring, calibration-free temperature transmitter TAD is an excellent choice. 452 Imperative: temperature monitoring in air conditioning. Temperature sensors System overview Page Compact temperature sensors 454 Compact temperature sensors with display, IO-Link 454 Control monitors for temperature sensors 454 Control monitors for temperature sensors, IO-Link 455 Modular temperature transmitters 455 Pt1000 probe sensors for standard applications 455 - 456 Pt100 probe sensors for standard applications 456 - 457 Pt100 probe sensors for standard applications 457 Cable sensors for standard applications 457 - 458 Cable sensors with bolt-on sensor for standard applications 458 Cable sensors for ATEX applications 3D/3G 459 Cable sensors with bolt-on sensors for ATEX 3D / 3G applications 459 Temperature transmitters for standard applications 459 AS-i temperature transmitters for standard applications 460 Probe sensors for hygienic and wet areas 460 Sensors with process connection for hygienic and wet areas 460 - 461 Cable sensors for hygienic and wet areas 461 Temperature transmitters for hygienic and wet areas 462 AS-i temperature transmitters for hygienic and wet areas 462 Self-monitoring temperature transmitters for hygienic and wet areas, IO-Link 462 - 463 Accessories for temperature sensors TN / TR 463 Accessories and software 463 Thermowells for temperature sensors 464 Adapters 464 - 466 Hygienic adapters 466 - 468 Wiring diagrams 468 - 469 Scale drawings / drawing no. – CAD download: www.ifm.com 470 - 473 453 Temperature sensors Compact temperature sensors Type Measuring range [°C] Process connection Probe length Ub [mm] [V] Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 1 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 -25...140 G¼ A 39 9.6...32 1/3 1 TK6130 -25...140 ¼" NPT 39 9.6...32 1/3 2 TK6330 M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 -25...140 G¼ A 39 9.6...32 1/3 1 TK7130 -25...140 ¼" NPT 39 9.6...32 1/3 2 TK7330 M12 connector · Output function 1 x normally open / 1 x normally closed · DC PNP · Wiring diagram no. 2 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 -25...140 G½ A 267 9.6...32 1/3 3 TK7480 Probe length Ub Drawing no. Order no. [mm] [V] Dynamic response T05 / T09 [s] Compact temperature sensors with display, IO-Link Type Measuring range [°C] Process connection M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DC PNP/NPN · Wiring diagram no. 4 · Connector groups 9, 10, 11, 107, 108, 110, 135 -40...150 M18 x 1.5 45 18...32 1/3 4 TN2531 M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 5 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 -40...150 M18 x 1.5 45 18...32 1/3 4 TN7531 Drawing no. Order no. Control monitors for temperature sensors Type Measuring range [°C] Process connection Display Ub LED [V] Current consump. [mA] Iload [mA] M12 connector · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector groups 17, 18 -40...150 G½ A Display unit 18...28 Product selectors and further information can be found at: www.ifm.com 454 90 < 500 5 TR8430 Temperature sensors Control monitors for temperature sensors, IO-Link Type Measuring range [°C] Process connection Display Ub LED [V] Current consump. [mA] Iload Drawing no. Order no. [mA] M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DC PNP/NPN · Wiring diagram no. 7 · Connector groups 9, 10, 11, 107, 108, 110, 135 -40...300 G½ A Display unit 18...32 50 250 6 TR2432 M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 8 · Connector groups 107, 108, 135 -40...300 G½ A Display unit 18...32 50 250 6 TR7432 Drawing no. Order no. Modular temperature transmitters Type Measuring range Process connection Ub Ambient temperature [°C] Measuring element [V] [°C] M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 9 · Connector groups 9, 11, 107, 108, 135 -50...300 M12 20...32 -25...70 for Pt100 and Pt1000 measuring elements 7 TP3232 0...100 M12 20...32 -25...70 for Pt100 and Pt1000 measuring elements 7 TP3237 -50...150 M12 20...32 -25...70 for Pt100 and Pt1000 measuring elements 7 TP3231 -18...148.9 M12 20...32 -25...70 for Pt100 and Pt1000 measuring elements 7 TP3233 M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 10 · Connector groups 9, 11, 107, 108, 135 0...100 M12 18...32 -25...70 for Pt100 and Pt1000 measuring elements 7 TP9237 Pt1000 probe sensors for standard applications Type Measuring range [°C] Diameter Probe length [mm] [mm] Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. 1 x Pt 1000 1/3 8 TT1050 M12 connector · high-grade stainless steel · Wiring diagram no. 3 -40...150 10 160 You can find wiring diagrams and scale drawings from page 468 455 Temperature sensors Type Measuring range [°C] Diameter Probe length [mm] [mm] Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · high-grade stainless steel · Wiring diagram no. 3 -40...150 10 260 1 x Pt 1000 1/3 8 TT2050 -40...150 10 360 1 x Pt 1000 1/3 8 TT3050 -40...150 10 560 1 x Pt 1000 1/3 8 TT5050 Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. Pt100 probe sensors for standard applications Type Measuring range [°C] Diameter Probe length [mm] [mm] M12 connector · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 6 100 1 x Pt 100 1/3 9 TT0281 -40...150 6 150 1 x Pt 100 1/3 9 TT1281 -40...150 6 250 1 x Pt 100 1/3 9 TT2281 -40...150 6 350 1 x Pt 100 1/3 9 TT3281 -40...150 6 50 1 x Pt 100 1/3 9 TT9281 -40...150 10 160 1 x Pt 100 1/3 8 TT1081 -40...150 10 260 1 x Pt 100 1/3 8 TT2081 -40...150 10 360 1 x Pt 100 1/3 8 TT3081 -40...150 10 560 1 x Pt 100 1/3 8 TT5081 -40...125 8.2 44 1 x Pt 100 1/3 10 TM9950 Product selectors and further information can be found at: www.ifm.com 456 Temperature sensors Type Measuring range [°C] Diameter Probe length [mm] [mm] Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. 1 x Pt 100 1/3 10 TM9900 Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · metal · Connector groups 9, 11, 107, 108, 135 -40...125 8.2 44 Pt100 probe sensors for standard applications Type Measuring range [°C] Process connection Probe length [mm] M12 connector · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 ½" NPT 50 1 x Pt 100 1/3 11 TM4311 -40...150 ½" NPT 100 1 x Pt 100 1/3 11 TM4331 -40...150 ½" NPT 150 1 x Pt 100 1/3 11 TM4341 -40...150 ½" NPT 250 1 x Pt 100 1/3 11 TM4361 -40...150 G¼ 25 1 x Pt 100 1/3 12 TM4101 -40...150 G½ 50 1 x Pt 100 1/3 13 TM4411 -40...150 G½ 100 1 x Pt 100 1/3 13 TM4431 -40...150 G½ 150 1 x Pt 100 1/3 13 TM4441 -40...150 G½ 250 1 x Pt 100 1/3 13 TM4461 Cable material Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. silicone cable 1 x Pt 100 3/8 14 TS4759 Cable sensors for standard applications Type Measuring range [°C] Diameter [mm] Cable 4 m · high-grade stainless steel -30...180 M5 / L = 25.7 You can find wiring diagrams and scale drawings from page 468 457 Temperature sensors Type Measuring range [°C] Diameter Cable material Sensor element [mm] Dynamic response T05 / T09 [s] Drawing no. Order no. Cable with connector 2 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Ø 6 / L = 45 FPM (Viton) cable 1 x Pt 1000 3 / 10 15 TS2251 -40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 6 / 25 16 TS2051 -50...250 Ø 6 / L = 50 PTFE cable 1 x Pt 100 11 / 37 17 TS2256 -50...250 Ø 10 / L = 50 PTFE cable 1 x Pt 100 12 / 39 18 TS2056 -30...90 M5 PUR cable 1 x Pt 100 3/8 19 TS2789 -30...180 – silicone cable 1 x Pt 100 3/8 20 TS2759 -30...180 M6 / L = 25.7 silicone cable 1 x Pt 100 3/8 21 TS2659 3 / 10 22 TS9281 6 / 25 16 TS5051 3/8 20 TS0759 Dynamic response T05 / T09 [s] Drawing no. Order no. 9 / 15 23 TS2229 Cable with connector 2.5 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Ø 6 / L = 45 FPM (Viton) cable 1 x Pt 100 Cable with connector 5 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 Cable with connector 10 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -30...180 – silicone cable 1 x Pt 100 Cable sensors with bolt-on sensor for standard applications Type Measuring range [°C] Diameter Cable material Sensor element [mm] Cable with connector 2 m · stainless steel · Connector groups 9, 11, 107, 108, 135 -25...90 M6 / 12 x 51 PUR cable 1 x Pt 100 Product selectors and further information can be found at: www.ifm.com 458 Temperature sensors Cable sensors for ATEX applications 3D/3G Type Measuring range [°C] Diameter Cable material Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. silicone cable 1 x Pt 100 4 / 10 24 TS325A [mm] Cable 3 m · high-grade stainless steel -20...80 Ø 5/6 / L = 40 Cable sensors with bolt-on sensors for ATEX 3D / 3G applications Type Measuring range [°C] Diameter Cable material Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. [mm] Cable 5 m · high-grade stainless steel -20...80 M6 / 10 x 42 silicone cable 1 x Pt 100 13 / 39 25 TS522A -20...80 10 silicone cable 1 x Pt 1000 18 / 42 26 TS502A Dynamic response T05 / T09 [s] Drawing no. Order no. Temperature transmitters for standard applications Type Measuring range [°C] Process connection Probe length Ub [mm] [V] M12 connector · high-grade stainless steel · DC · Connector groups 9, 11, 107, 108, 135 -50...150 G¼ A 60 10...30 1/3 27 TA3131 0...140 G¼ A 60 10...30 1/3 27 TA3130 -50...150 G¼ A 200 10...30 1/3 28 TA3171 -17.8...148.9 ¼" NPT 60 10...30 1/3 29 TA3333 0...100 ¼" NPT 60 10...30 1/3 29 TA3337 You can find wiring diagrams and scale drawings from page 468 459 Temperature sensors AS-i temperature transmitters for standard applications Type Measuring range [°C] Process connection Probe length Ub [mm] [V] Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · high-grade stainless steel · DC · Connector groups 9, 11, 107, 108, 135 -10...150 G¼ A 60 18...31.6 1/3 30 TAA131 Diameter Probe length Sensor element Drawing no. Order no. [mm] [mm] Dynamic response T05 / T09 [s] Probe sensors for hygienic and wet areas Type Measuring range [°C] M12 connector · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 6 100 1 x Pt 100 1/3 9 TT0291 -40...150 6 150 1 x Pt 100 1/3 9 TT1291 -40...150 6 250 1 x Pt 100 1/3 9 TT2291 -40...150 6 350 1 x Pt 100 1/3 9 TT3291 -40...150 6 50 1 x Pt 100 1/3 9 TT9291 Dynamic response T05 / T09 [s] Drawing no. Order no. Sensors with process connection for hygienic and wet areas Type Measuring range [°C] Process connection Probe length Sensor element [mm] M12 connector · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Clamp 1-1.5" ISO 2852 30 1 x Pt 100 1/3 31 TM4801 -40...150 Clamp 1-1.5" ISO 2852 50 1 x Pt 100 1/3 31 TM4811 -40...150 Clamp 1-1.5" ISO 2852 100 1 x Pt 100 1/3 31 TM4831 -40...150 Clamp 1-1.5" ISO 2852 150 1 x Pt 100 1/3 31 TM4841 Product selectors and further information can be found at: www.ifm.com 460 Temperature sensors Type Measuring range [°C] Process connection Probe length Sensor element [mm] Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Clamp 2" 30 1 x Pt 100 1/3 32 TM4901 -40...150 Clamp 2" 50 1 x Pt 100 1/3 32 TM4911 -40...150 Clamp 2" 100 1 x Pt 100 1/3 32 TM4931 -40...150 Clamp 2" 150 1 x Pt 100 1/3 32 TM4941 -40...150 G½ with s ealing cone 20 1 x Pt 100 1/3 33 TM4591 -40...150 G½ with s ealing cone 30 1 x Pt 100 1/3 33 TM4501 -40...150 G½ with s ealing cone 50 1 x Pt 100 1/3 33 TM4511 -40...150 G½ with sealing cone 100 1 x Pt 100 1/3 33 TM4531 -40...150 G½ with sealing cone 150 1 x Pt 100 1/3 33 TM4541 Sensor element Dynamic response T05 / T09 [s] Drawing no. Order no. 6 / 25 16 TS2051 6 / 25 16 TS5051 12 / 39 18 TS2056 Cable sensors for hygienic and wet areas Type Measuring range [°C] Diameter Cable material [mm] Cable with connector 2 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 Cable with connector 5 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 Cable with connector 2 m · high-grade stainless steel · Connector groups 9, 11, 107, 108, 135 -50...250 Ø 10 / L = 50 PTFE cable 1 x Pt 100 You can find wiring diagrams and scale drawings from page 468 461 Temperature sensors Temperature transmitters for hygienic and wet areas Type Measuring range [°C] Process connection Probe length Ub [mm] [V] Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · high-grade stainless steel · DC · Connector groups 9, 11, 107, 108, 135 0...100 G½ A 87.5 10...30 1/3 34 TA3437 0...140 G½ A 87.5 10...30 1/3 34 TA3430 -10...150 G½ A 87.5 10...30 1/3 34 TA3431 0...100 Ø 6 mm 123 10...30 1/3 35 TA3237 -17.8...148.9 Ø 6 mm 123 10...30 1/3 35 TA3233 -10...150 Ø 6 mm 123 10...30 1.2 / 3.5 35 TA3231 Dynamic response T05 / T09 [s] Drawing no. Order no. 1/3 36 TAA431 Drawing no. Order no. AS-i temperature transmitters for hygienic and wet areas Type Measuring range [°C] Process connection Probe length Ub [mm] [V] M12 connector · high-grade stainless steel · DC · Connector groups 9, 11, 107, 108, 135 -10...150 G½ A 87.5 18...31.6 Self-monitoring temperature transmitters for hygienic and wet areas, IO-Link Type Measuring range [°C] Process connection Probe length Ub [mm] [V] Dynamic response T05 / T09 [s] M12 connector · Output function normally open / normally closed / heartbeat programmable, 4...20 mA analogue · DC PNP/NPN · Wiring diagram no. 11 · Connector groups 9, 10, 11, 107, 108, 110, 135 0...150 Aseptoflex Vario 87.5 18...32 3/6 37 TAD181 0...150 Aseptoflex Vario 33 18...32 3/6 38 TAD981 0...150 G½ A 87.5 18...32 3/6 39 TAD191 Product selectors and further information can be found at: www.ifm.com 462 Temperature sensors Type Measuring range [°C] Process connection Probe length Ub [mm] [V] Dynamic response T05 / T09 [s] Drawing no. Order no. M12 connector · Output function normally open / normally closed / heartbeat programmable, 4...20 mA analogue · DC PNP/NPN · Wiring diagram no. 11 · Connector groups 9, 10, 11, 107, 108, 110, 135 0...150 G½ A 33 18...32 3/6 40 TAD991 Accessories for temperature sensors TN / TR Type Description Order no. Mounting clamp · Ø 34 mm · Housing materials: PBT E10017 Mounting clamp · Ø 34 mm · Housing materials: PA E10193 Mounting device 2 way · for fluid sensors · Housing materials: POM E30078 Mounting device 3 way · for fluid sensors · Housing materials: POM E30079 Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006 Accessories and software Type Description Order no. IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link (4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110) E30396 Memory plug · Parameter memory for IO-Link sensors · Housing materials: PA PACM 12 / PET / sealing: FPM / nut: stainless steel 316L / 1.4404 / connector: TPU E30398 Teach button · for sensors PP0xE, PP052x, PP755x · for memory plug (E30398) · 0.9 m · Housing materials: stainless steel / PA / PMMA E30405 You can find wiring diagrams and scale drawings from page 468 463 Temperature sensors Thermowells for temperature sensors Type Description Order no. Welding thermowell · Ø 10 mm · Probe length: 173 mm · Housing materials: stainless steel 316Ti / 1.4571 E35220 Welding thermowell · Ø 35 mm · Probe length: 126.5 mm · for type TA343x, TAA431, TAD191 · Housing materials: stainless steel 316L / 1.4404 E30403 Thermowell for temperature sensors · G ½ · Probe length: 53 mm · for type TA34xx, TAA431, TAD191 · Housing materials: stainless steel 316L / 1.4404 E30393 Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316L / 1.4404 E35010 Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 182 mm · Housing materials: stainless steel 316L / 1.4404 E35020 Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 282 mm · Housing materials: stainless steel 316L / 1.4404 E35030 Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 482 mm · Housing materials: stainless steel 316L / 1.4404 E35050 Thermowell for temperature sensors · Ø 10 mm - ½„ NPT · Probe length: 72 mm · Housing materials: stainless steel 316Ti / 1.4571 E35110 Thermowell for temperature sensors · Ø 6 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316Ti / 1.4571 E37010 Thermowell for temperature sensors · Ø 6 mm - G ½ · Probe length: 182 mm · Housing materials: stainless steel 316Ti / 1.4571 E37020 Thermowell for temperature sensors · Ø 6 mm - G ½ · Probe length: 282 mm · Housing materials: stainless steel 316Ti / 1.4571 E37030 Adapters Type Description Thread cover · Ø 24 mm - G ½ · to cover the G½ thread for installation in hygienic areas · for type TR · Housing materials: stainless steel Product selectors and further information can be found at: www.ifm.com 464 Order no. E30091 Temperature sensors Type Description Order no. Mounting set · for direct connection of temperature sensors TT to control monitors TR · Housing materials: stainless steel E30017 Clamp fitting · Ø 6/8/10 mm - G ½ · for temperature sensors TS / TT · Housing materials: stainless steel / FPM E30018 Clamp fitting · Ø 6/8/10 mm - ½" NPT · for temperature sensors TS / TT · Housing materials: stainless steel / FPM E30025 Mounting adapter · M18 x 1.5 - Ø 23 mm · PVC adapter to be glued into the pipe · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: PVC E40148 Adapter · G ¼ - G ¼ · Housing materials: stainless steel 316L / 1.4404 E30107 Adapter · M18 x 1.5 - G ½ · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM (fitted) E30073 Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel 316L / 1.4404 E40124 Welding adapter · Ø 24.7 mm · ball · for temperature sensors Ø 6 mm · Clamp fitting · Housing materials: stainless steel 316L / 1.4404 E30108 Welding adapter · Ø 25 mm · ball · for temperature sensors Ø 6 mm · Clamp fitting · Housing materials: stainless steel 316L / 1.4404 / rubber ring: PEEK E30407 Progressive ring fitting for temperature sensors · Ø 10 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30016 Progressive ring fitting for temperature sensors · Ø 10 mm - ½" NPT · Housing materials: stainless steel 316Ti / 1.4571 E30024 Progressive ring fitting for temperature sensors · Ø 6 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30047 Progressive ring fitting for temperature sensors · Ø 6 mm - ¼" NPT · Housing materials: stainless steel 316Ti / 1.4571 E30049 Progressive ring fitting for temperature sensors · Ø 6 mm - G ¼ · Housing materials: stainless steel 316Ti / 1.4571 E33431 You can find wiring diagrams and scale drawings from page 468 465 Temperature sensors Type Description Order no. Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: titanium E40114 Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128 Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials: nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A E40104 Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404 E40101 Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40100 Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404 E40099 Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098 Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096 Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: brass E40097 Adapter · M18 x 1.5 - ½" NPT · Insertion depth of the probe of SID, SFD, TN: · 23 mm · Housing materials: stainless steel 316L / 1.4404 E40107 Adapter · M18 x 1.5 - G ½ · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM (fitted) E30073 Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK · Housing materials: PP transparent E30094 Hygienic adapters Type Description Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 Product selectors and further information can be found at: www.ifm.com 466 Order no. E33201 Temperature sensors Type Description Order no. Aseptoflex Vario adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33202 Aseptoflex Vario adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33701 Aseptoflex Vario adapter · Clamp · 2" · ISO 2852 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33702 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33212 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33213 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33712 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · DIN 11851 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33713 Aseptoflex Vario adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E33222 Aseptoflex Vario adapter · Varivent type N · DN40 (1.5"), D = 68 · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33722 Aseptoflex Vario adapter · pipe fitting · DN40 (1.5") · SMS · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33731 Aseptoflex Vario adapter · pipe fitting · DN50 (2") · SMS · for units with Aseptoflex Vario adapter · Metal to metal seal · Housing materials: stainless steel 316L / 1.4435 E33732 Welding adapter · Ø 50 mm · for units with Aseptoflex Vario adapter · Sealing by sealing ring · Housing materials: stainless steel 316L / 1.4435 E30122 Adapter plug · for Aseptoflex Vario adapter · Housing materials: high-grade stainless steel E30128 G ½ adapter · Clamp · 1-1.5" · ISO 2852 / DIN 32676 · for units with G ½ adaptation · Housing materials: stainless steel 316L / 1.4404 E33401 You can find wiring diagrams and scale drawings from page 468 467 Temperature sensors Type Description Order no. G ½ adapter · Clamp · 2" · ISO 2852 / DIN 32676 · for units with G ½ adaptation · Housing materials: stainless steel 316L / 1.4404 E33402 G ½ adapter · DN25 · SMS · for units with G ½ adaptation · Housing materials: stainless steel 316L / 1.4404 E33430 Welding adapter · G ½ - Ø 30 mm · for tanks · Housing materials: stainless steel 316L / 1.4435 E43300 Welding adapter · G ½ - Ø 29 mm · for pipes · Housing materials: stainless steel 316L / 1.4435 E43301 Adapter · G ½ · pipe fitting · DN25 (1") · DIN 11851 · Housing materials: stainless steel 316L / 1.4435 E43304 Adapter · G ½ · pipe fitting · DN40 (1.5") · DIN 11851 · Housing materials: stainless steel 316L / 1.4435 E43305 Adapter · G ½ · Varivent type F · DN25 (1"), D = 50 · Housing materials: stainless steel 316L / 1.4435 E43306 Adapter · G ½ · Varivent type N · DN40 (1.5"), D = 68 · Housing materials: stainless steel 316L / 1.4435 E43307 sealing plug · G ½ · for G ½ adapter · Housing materials: stainless steel 316L / 1.4435 E43308 Welding adapter · G ½ - Ø 35 mm · ball · Housing materials: stainless steel 316L / 1.4404 E30055 Welding adapter · G ½ - Ø 45 mm · collar · Housing materials: stainless steel 316L / 1.4404 E30056 Wiring diagrams 1 2 1 4: 2: 3 1 L+ L+ 2 4 4 2 3 3 4 3 L 2: Out 2 4: Out 1 L Product selectors and further information can be found at: www.ifm.com 468 1 2 Temperature sensors Wiring diagrams 4 8 1 1 1 L+ 2 4 4 2 3 2 1 3 B 4 1 1 BN 2 2 WH L+ 3 L B L+ B L 2 TR 3 4 BK 4 1 3 BU L 2 5 3 3 4 1 1 L+ 2 4 2: Out 2 4: Out 1 L+ 2 9 4 3 2: Out 2 4: Out 1 L 3 L 1 B 1 6 2 3 B 1 4 L+ 2 1 1 (n.c.) L+ 2 4 3 Out 4 7 4 L 2 2 Out 3 6 TR 8430 IO-Link 3 Out 1 5 3 (n.c.) 3 L 4 1 Out 2 4 2 TP 4 n.c. 3 L 10 7 1 B 1 1 2 B 3 B 1 4 1 1 BN 2 2 WH 2 3 4 BK 1 4 TR 2432 1 4 4 TP L+ IO-Link 2 1 3 3 BU 2 L 2 3 3 B L+ B 2 2 3 L 3 4 4 11 2 1 1 BN 1 BN L+ L+ 2 WH 4 BK 2 WH L 3 BU L 469 Temperature sensors Scale drawings / drawing no. – CAD download: www.ifm.com 1 5 27 M12 x1 2 3 48 M12 x1 34 39 60 87 93 96,5 1 G1 4 16,5 25 27 G1 2 8,2 30 4 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor 2 27 M12 x1 6 2 3 48 M12 x1 105,5 34 93 96 1 16,5 60 35 48 27 -18 NPT 14 8,2 G1 2 3 30 4 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor 27 M12 x1 7 25 M12x1 327 18 255 267 22 52 LED 27 M12x1 2 8 G1 2 1: connection for voltage supply and output signals, 2: connection for temperature sensor 4 8 2 3 34 21,5 L 18,5 M12x1 8 10 48 M12x1 40 1 1 94,5 14 128 1: plug area 9 18,5 M12x1 22 4 8,2 27,7 1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: internal thread M18 x 1.5 Product selectors and further information can be found at: www.ifm.com 470 L 6 45 24 Temperature sensors Scale drawings / drawing no. – CAD download: www.ifm.com 16 M12x1 72 50 42 12 M12 x1 48 7 10 10 60 17 44 1 42,5 50 M12 x1 8,2 6 22 90 14 12 19 1: internal thread M18 x 1.5 11 18 6 M12x1 50 42 M12 x1 42,5 20 12 27 7 10 L 35 23 12 " NPT 19 12 25,7 8 24,5 M12x1 6 M12 x1 4 M5 14 L 24 5,4 49,5 8 G1 4 22 1: tightening torque 1.5 Nm 13 20 24 L 14 25,7 4 M5 8 M12 x1 M12x1 6 58 G1 2 5,4 8 27 14 1: tightening torque 1.5 Nm 25,7 21 4 M5 8 25,7 58 5 M6 8 M12 x1 5,4 8 2,5 6,5 13 15 22 M12 x1 45 6 72 48 72 M12 x1 48 45 6 80 ± 5 471 Temperature sensors Scale drawings / drawing no. – CAD download: www.ifm.com 28 23 30 M12x1 51 12 M12 x1 13,7 35 14 6,5 13,5 17 257,7 44 1,8 8,7 49,5 G1 4 200 27 24 8 5 6 40 30 29 25 30 M12x1 13,7 10 42 13,5 117,7 3 10 44 6,5 12 27 -18 NPT 60 14 26 8,2 48 30 3 10 11 18 18 30 M12x1 14,9 18 53 LED G1 4 13,5 117,7 44 27 60 13,7 13,5 30 M12x1 127,9 27 G1 4 60 27 8,2 31 L 24 10 M12x1 6 8,2 Product selectors and further information can be found at: www.ifm.com 472 Temperature sensors Scale drawings / drawing no. – CAD download: www.ifm.com 37 32 L 24 210,5 195,7 10 140,5 50,4 M12x1 8 10 M12x1 6 87,5 34 33 61,6 47,5 G1 38 24,5 M12x1 6 L 156 141,2 86 33 G1 2 8 10 22 50,4 M12x1 34 180,5 13,7 43,8 123 87,5 18,3 30 M12x1 G1 8,2 10 34 47,5 39 27 LED G1 2 231 161 123 87,5 35 50,4 171 34 123 6 14 M12 x1 8 10 14 30 M12x1 27 G1 2 40 176,5 36 106,5 68,5 33 190,5 14 8 10 123 52,8 8,2 10 18,3 30 M12x1 47,5 50,4 87,5 M12 x1 14,7 27 LED 27 G1 2 G 12 473 Diagnostic systems Online vibration diagnosis – optimum price / performance ratio. Decentralised monitoring of plant and equipment integrated into the machine. Compact field units and modular control cabinet units. Digital and analogue alarm outputs. Standard data interface (OPC). Diagnostic systems efector octavis is a vibration monitor which not only detects vibration data, but also carries out signal analysis and machine diagnosis directly on the machine. The machine condition is determined and is forwarded to the PLC or to SCADA software. It fulfils the main requirements for modern machine monitoring: compatibility, modularity and transferable configuration. Compatible and modular The compatibility with data structures such as the OPC interface makes it possible to integrate condition data into a higher-level system. With the requirement for modularity the user can define the extent of condition monitoring to be implemented – this means the complete range of diagnosis is possible right from the “first unit”. Transferable configuration is attained with application-related parameter sets. A wizard function in the software guides the user through creating, managing and archiving the monitoring parameters. Internal trend memory (type VE / VSE) of all monitored diagnosis factors can be evaluated via PC software. Trend memory All units of the octavis family type VE / VSE feature an internal trend memory which ensures detailed analysis and optimisation of the application even without external data recording. The storage intervals are freely selectable. This means that the storage length of the non volatile ring buffer is adjusted to the requirements. The suitable system for your application: – Standard vibration characteristic values / permanent machine protection: VSE, VE, VK, VT – Internal trend memory / root cause analysis: VSE, VE – Online diagnosis / early damage detection: VSE (VE partly) – Network capability of the system: VSE (VE partly*) – Load meter: VSE *Profibus DP gateway 474 Easy vibration monitoring: Type VK provides a combination of switching output and transmitter function in conjunction with the tried and tested easy-turn concept. Diagnostic systems System overview Page Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE 476 Software VB / VE 476 Accessories VB / VE 476 Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK 477 Vibration transmitters for vibration monitoring of machines and plants to ISO 10816 type VT 477 Accessories VK 477 Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE 477 Accessories VSE 477 - 478 Connection cables VSE 478 Vibration sensors for connection to external diagnostic electronics VSE - type VSA 478 Accessories VSA 478 - 479 Oil moisture sensor 479 Wiring diagrams 479 Scale drawings / drawing no. – CAD download: www.ifm.com 479 475 Diagnostic systems Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE Type Description Drawing no. Order no. Vibration monitoring of up to 2 diagnosis values and 2 g-monitors, RMS; peak; method of analysis FFT/H-FFT; integrated history function; speed source connectable; integrated LED-diagnosis; RS232 serial interface; PC-software required; IP67; 2 switching outputs; measurement range +/-25g; frequency resolution 1.25Hz; speed range 500... 6000 rpm; connection M12x1 and M8x1 plug connection 1 VB1001 Vibration monitoring of up to 5 diagnosis values and 2 g-monitors; RMS; peak: method of analysis FFT/H-FFT; integrated history function; speed source connectable; integrated LED-diagnosis; RS232 serial interface; PC-software required; IP67; 2 switching outputs; measuring range +/-25g; frequency resolution adjustable 1.25Hz or 0.125Hz; speed range 12... 12 000 rpm; Connection M12x1 and M8x1 plug connection 1 VE1001 Vibration monitoring of up to 5 diagnosis values and 2 g-monitors; RMS; peak; method of analysis FFT/H-FFT; integrated history function; speed source connectable; RS485 serial interface; PC-software required; IP 69k; 2 switching outputs; measuring range +/-25g; frequency resolution adjustable 1.25Hz or. 0.125Hz; speed range 12... 12 000 rpm; connection M12x1 and M8x1 plug connection 2 VE1101 Vibration monitoring of up to 5 diagnosis values and 2 g-monitors; method of analysis FFT; integrated history function; speed source connectable; RS232 serial interface; PC-software required; IP 69k; 2 switching outputs; measuring range +/-25g; frequency resolution 15.625Hz; speed range 1500... 96000 rpm; connection M12x1 und M8x1 plug connection 3 VE1103 Compact unit for ATEX approval group II; category 2D/2G; vibration monitoring of up to 5 diagnosis values and 2 g-monitors; method of analysis FFT/H-FFT; integrated history function; speed source connectable; RS485 serial interface; PC-software required; IP 69k; 1 switching output; measuring range +/-25g; frequency resolution 1.25 Hz; frequency range 3...6000 Hz; speed range 120..12000 rpm; connection cable 5m 4 VE113A Description Drawing no. Order no. Expert software for efector octavis · Types VB and VE – VES001 Software VB / VE Type Accessories VB / VE Type Description Parameter setting cable for efector octavis · straight / straight · 3 m · Housing materials: PUR E11572 USB/RS485 adapter cable · straight / straight E30098 USB/RS485 adapter cable · straight / straight · For efector octavis VE113A E30117 Power supply · 2 m · Housing materials: PPE E30080 Y connection cable · 2 way · Free from halogen · 0.25 m · Housing materials: TPU E11664 Product selectors and further information can be found at: www.ifm.com 476 Order no. Diagnostic systems Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK Type Description Drawing no. Order no. IP67; 1 switching output and response delay (1...60s) adjustable via setting rings; 1 analogue output (4mA = 0 mm/s, 20 mA=25 mm/s); M12 connector; measuring range RMS 0...25 mm/s; frequency range 10...1000 Hz; accuracy / deviation (in % of span): switchpoint accuracy < +/-4, repeatability <1; M12 connector 5 VKV021 IP67; 1 switching output and response delay (1...60s) adjustable via setting rings; 1 analogue output (4mA = 0 mm/s, 20 mA=50 mm/s); M12 connector; measuring range RMS 0...50 mm/s; frequency range 10...1000 Hz; accuracy / deviation (in % of span): switchpoint accuracy < +/-4, repeatability <1; M12 connector 5 VKV022 Vibration transmitters for vibration monitoring of machines and plants to ISO 10816 type VT Type Description Vibration transmitter · Connection via M12 connector · Vibration transmitter to ISO 10816 · Measuring range veff: 0...25 mm/s · Analogue output 4...20 mA · stainless steel 316L / 1.4404 Drawing no. Order no. 6 VTV122 Accessories VK Type Description Order no. Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK · Housing materials: PP transparent E30094 Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE Type Description Drawing no. Order no. Frequency-selective machine monitoring of up to 4 measurement points and 2 other process quantities; Ethernet interface TCP/IP; PC-software required; RMS, a-peak, a_RMS; integrated history function with real-time clock; 2 switching outputs or 1 switching and 1 analogue output; 12 freely configurable counters operating hours, events, load) 7 VSE002 Frequency-selective machine monitoring of up to 4 measurement points and 2 other process quantities; Ethernet interface TCP/IP; PC-software required; RMS a-peak, a_RMS; integrated history function with real-time clock; 2 switching outputs or 1 switching and 1 analolgue output; up to 8 freely configurable I/O; 12 freely configurable counters (operating hours, events, load) 8 VSE100 Accessories VSE Type Description Number of connections Order no. Parameter setting software for VSExxx – VES003 octavis OPC server · Software · German/English 25 VOS001 You can find wiring diagrams and scale drawings from page 479 477 Diagnostic systems Type Description Number of connections Order no. octavis OPC server · Software · German/English 50 VOS002 octavis OPC server · Software · German/English 75 VOS003 octavis OPC server · Software · German/English 100 VOS004 Connection cables VSE Type Description Order no. Jumper · straight / straight · Ethernet · Cross-over patch cable · 5 m · Housing materials: PUR E30112 Jumper · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080 Vibration sensors for connection to external diagnostic electronics VSE - type VSA Type Description Drawing no. Order no. Vibration sensors based on MEMs technology; measuring range +/- 25g; IP 68 /IP 69k; frequency range 0...6000 Hz; linearity 0.2%; overload protection 500g; ambient temperature -30...125°C; M12 connector; recommended cable length 30m 9 VSA001 Vibration sensors based on MEMs technology; measuring range +/- 25g; IP 67; frequency range 0...6000 Hz; linearity 0.2%; overload protection 500g; ambient temperature -30...85°C; connection cable PUR with cable plug M12 / 0.6m 10 VSA002 Vibration sensors based on MEMs technology; extremely small design; measuring range +/- 25g; IP 67; frequency range 0...10000 Hz; linearity 0.2%; overload protection 500g; ambient temperature -30...100°C (contact temperature - 20...80°C); connection cable PUR 3m 11 VSA004 Vibration sensors based on MEMs technology; extremely small design; measuring range +/- 25g; IP 67; frequency range 0...10000 Hz; linearity 0.2%; overload protection 500g; ambient temperature -30...100°C (contact temperature - 20...80°C); connection cable PUR 10m 11 VSA005 Accessories VSA Type Description conical washer · Ø 8.4 / 15 mm · for efector octavis · Housing materials: stainless steel 316Ti / 1.4571 Product selectors and further information can be found at: www.ifm.com 478 Order no. E30115 Diagnostic systems Type Description Order no. Adapter · M8-M8 · for the VSA001 vibration sensor · Electrical isolation · Housing materials: PEEK E30132 Oil moisture sensor Type Process connection Pressure rating Protection Medium temperature oil [°C] [bar] Ambient temperature Drawing no. Order no. 12 LDH100 [°C] M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 1 · Connector groups 16, 17, 18 G¾ 10 IP 67 -20...100 -20...85 Wiring diagrams 1 1 L+ 2 L 3 n.c. 4 n.c. 5 n.c. 6 Out 1 7 Out 2 8 n.c. screen Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 58,2 46,4 5,3 20 6 M12 x1 36 14 14 M12 x1 36 58,2 46,4 20 5,3 6 M5 M5 4 LED 37,6 10 M8 x1 37,6 10 5,3 M8x1 1 4 5 5,3 5 1: Programming buttons 479 Diagnostic systems Scale drawings / drawing no. – CAD download: www.ifm.com 7 3 25,4 103,4 35,5 20 5,3 6 100 14 M12 x1 36 58,2 46,4 M5 LEDs 37,6 10 M8 x1 4 1 1: Ethernet interface 5,3 5 8 50 4 105 20 5,3 6 35,5 14 114 36 62,2 46,4 M5 LEDs 4 1 37,6 10 2 1: Ethernet interface, 2: Combicon plug with screw terminals (optional) 5,3 5 9 53 24 1 17 18,5 27 M12 x1 M12 x1 M8x1,25 5 8 11 63,7 73,1 17 1: conical angle = 90° 10 1 27 M8 22 18 1: tightening torque 15 Nm 14 M16x1,5 5 6 13 22 M12 x1 63,25 11 L 13,5 4,5 6,5 22 1/4''-28 UNF 18 11,5 5,5 1: Threaded adapter 1/4“-28 UNF / M8, 2: Threaded adapter 1/4“28 UNF, tightening torque 8 Nm Product selectors and further information can be found at: www.ifm.com 480 Diagnostic systems Scale drawings / drawing no. – CAD download: www.ifm.com 12 54 44 43 21,6 G3 4 42 M12x1 14 32 481 Bus system AS-interface Manufacturer-independent standard. Worldwide acceptance as a wiring system. Communication from the sensor to the controller. “Safety at Work” for safety-related applications. Intelligent system solutions for special tasks. Bus system AS-interface AS-interface (AS-i = actuator sensor interface) is a manufacturer-independent standard for the connection of actuators and sensors of the first field level. It is the only wiring system accepted worldwide. With 20 million slaves installed AS-i has been tried and tested as a low-cost feeder for all common fieldbuses for many years. The product range includes AS-i components for different areas from packaging and conveying via silo applications, machine tools, robotics and automation to the food industry and mobile vehicles. Safe The sophisticated AS-i technology and the extended diagnostic possibilities provide high reliability and machine uptime. “Safety at Work” is the extension of the AS-interface by safety-related components. Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC 61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i. Easy Due to the standardised system, the low wiring complexity and the quick connection technology, AS-i enables simple “Plug & Play”. The reduction of terminals leads to reduced documentation. Data and energy are jointly transmitted via a two-wire cable. The reverse polarity protected insulation displacement technology helps avoid errors. The modularity and the tree structure smoothly fit to the way the plant is put together. Cost-optimised It’s the end result that matters: Wiring complexity, documentation and set-up times are significantly reduced. The decentralisation of the AS-i participants leads to smaller and less expensive control cabinets. Simple diagnosis and a clear system design result in high machine uptime and avoid downtimes. 482 With “Safety at Work” AS-i also solves safetyrelated tasks. Reduced cost: reduced wiring complexity for faster installation and fewer error sources. Bus system AS-interface System overview Page Controllers, gateways and software 484 - 485 AS-i repeaters 485 AS-i power supplies 485 - 486 Insulation monitors 486 I/O modules for control cabinets 486 - 487 Field modules IP 67 487 - 490 Universal modules 490 - 491 Field modules IP 69K and accessories 491 Module lower parts 491 - 492 Pneumatic and actuator solutions 492 - 493 Safety at Work 494 - 495 AS-i sensors 495 - 496 Combicon connectors Flat cable splitters and accessories Accessories Safety at Work Accessories lower parts and addressing units 496 496 - 498 498 499 - 500 Accessories pneumatic components 500 Accessories RFID 501 AS-i manuals 502 Scale drawings / drawing no. – CAD download: www.ifm.com 502 - 512 483 Bus system AS-interface Controllers, gateways and software Type Number of AS-i masters Description Order no. 1 SmartLink DP · AS-i gateway / Profibus DP · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 1 AC1375 2 AS-i DP gateway · Full master functions · Graphic display · Profibus DP interface · Housing materials: aluminium / steel sheet galvanised 2 AC1376 1 AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 2 AC1365 2 AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 2 AC1366 1 AS-i controller E · AS-i controller freely programmable · Profibus DP interface · Ethernet programming interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 2 AC1355 2 AS-i controller E · AS-i controller freely programmable · Profibus DP interface · Ethernet programming interface · Full master functions · Graphic display · Housing for DIN rail mounting · Housing materials: aluminium / steel sheet galvanised 2 AC1356 1 AS-i Ethernet / IP Controller E · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 3 AC1327 2 AS-i Ethernet / IP Controller E · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 3 AC1337 1 AS-i DeviceNet controller E · AS-i controller with DeviceNet interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 4 AC1318 2 AS-i DeviceNet controller E · AS-i controller with DeviceNet interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 4 AC1324 1 AS-i CANopen Controller E · AS-i controller with CANopen interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 4 AC1331 2 AS-i CANopen Controller E · AS-i controller with CANopen interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheet galvanised 4 AC1332 1 AS-i controller E · AS-i controller freely programmable · Full master functions · Graphic display · Ethernet programming interface · Housing materials: aluminium / steel sheet galvanised 5 AC1353 2 AS-i controller E · AS-i controller freely programmable · Full master functions · Graphic display · Ethernet programming interface · Housing materials: aluminium / steel sheet galvanised 5 AC1354 1 AS-i Profinet gateway · AS-i master · Ethernet configuration interface · Profinet RT device class B · LCD colour display · Device supply either via 24 V or AS-i (AS-i bus 1) · Housing materials: aluminium powder coated / steel sheet galvanised / Makrolon 6 AC1401 2 AS-i Profinet gateway · AS-i master · Ethernet configuration interface · Profinet RT device class B · LCD colour display · Device supply either via 24 V or AS-i (AS-i bus 1) · Housing materials: aluminium powder coated / steel sheet galvanised / Makrolon 6 AC1402 Product selectors and further information can be found at: www.ifm.com 484 Drawing no. Bus system AS-interface Type Number of AS-i masters Description Drawing no. Order no. – AS-i data decoupling module · Combicon connection · Housing materials: Makrolon 7 AC1250 – CodeSys for Automation Alliance · Software CD for Controller E German/English version 2.3 · Single user licence · For all Windows operating systems – AC0340 Drawing no. Order no. AS-i repeater · Extension of the AS-i network by another 100 m · One additional AS-i power supply necessary · Combicon connection · PA 6.6 – AC2225 Passive AS-i bus termination · Extension of the cable to a maximum of 200 m without additional repeater · Improvement of the signal quality · Monitoring of the supply voltage by means of LEDs – AC1147 eASI-Tester · Local diagnosis of the AS-i network · Creation of test reports for AS-i networks · User-friendly diagnosis and evaluation via the connected PC 8 AC1145 AS-i tuner diagnostic module · Extension of the cable to a maximum of 200 m without additional repeater · Monitoring of the message quality · Display of critical states by „traffic light„ LEDs · PBT 9 AC1146 Drawing no. Order no. AS-i repeaters Type Description AS-i power supplies Type Output current AS-i [A] Description 2.8 Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate the AS-i communication · NEC Class II Power Source · 85 watts · aluminium / steel sheet galvanised 10 AC1216 2.8 Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate the AS-i communication · NEC Class II Power Source · cage clamps · 85 watts · aluminium / steel sheet galvanised 11 AC1226 2.8 Power supply · Integrated data decoupling · AS-i combined power supply 115/230 V AC for 26 V and AS-i · aluminium 12 AC1209 2.8 Power supply · DC convertor 24 V DC for AS-i system voltage · Integrated data decoupling · aluminium 13 AC1207 4 Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate the AS-i communication · Earth fault monitor integrated · 120 Watt · aluminium / steel sheet galvanised 14 AC1224 2x4 Power supply · AS-i dual power supply 115/230 V AC 2 x AS-i · Integrated data decoupling · aluminium 15 AC1212 8 Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate the AS-i communication · 240 watts · aluminium / steel sheet galvanised 16 AC1218 You can find scale drawings from page 502 485 Bus system AS-interface Type Output current AS-i [A] Description Drawing no. Order no. 17 AC1223 Description Drawing no. Order no. AS-i insulation monitor · Detection of asymmetric insulation faults · Screw terminal 18 AC2211 AS-i insulation monitor · Detection of symmetric and asymmetric insulation faults · Screw terminal 18 AC2212 Drawing no. Order no. Power supply · Three-phase AS-i power supply 400...500 V AC · Integrated data decoupling · Jumper to deactivate the AS-i communication · 240 watts · aluminium / steel sheet galvanised 8 Insulation monitors Type I/O modules for control cabinets Type Inputs / outputs Description 4 inputs Active AS-i module · String mounting possible · Addressing socket · Version 2.1 with extended addressing mode · Digital inputs · Combicon connection · PA 19 AC2250 4 inputs Active AS-i module · String mounting possible · Addressing socket · Input supply from external PELV voltage source · Version 2.1 with extended addressing mode · Digital inputs · Combicon connection · PA 19 AC2254 4 outputs Active AS-i module · String mounting possible · Addressing socket · Version 2.1 · Digital outputs · Combicon connection · PA 19 AC2252 4 inputs / 2 outputs Active AS-i module · String mounting possible · Addressing socket · Version 2.1 with extended addressing mode · Digital inputs · Combicon connection · PA 19 AC2256 4 inputs / 2 outputs Active AS-i module · String mounting possible · Addressing socket · Input supply from external PELV voltage source · Version 2.1 with extended addressing mode · Digital inputs and outputs · Combicon connection · PA 19 AC2255 4 inputs / 3 outputs Active AS-i module · String mounting possible · Addressing socket · Version 2.1 with extended addressing mode · Digital inputs and outputs · Combicon connection · PA 19 AC2264 4 inputs / 4 outputs Active AS-i module · String mounting possible · Addressing socket · Version 2.1 · Digital inputs and outputs · Combicon connection · PA 19 AC2251 4 inputs / 4 outputs; bidirectional Active AS-i module · String mounting possible · Addressing socket · External sensor supply PELV · Version 2.1 · Digital inputs and outputs · Combicon connection · PA 19 AC2257 4 inputs / 4 outputs; bidirectional Active AS-i module · String mounting possible · Addressing socket · External sensor supply PELV · Version 3.0 with extended addressing mode · Digital inputs and outputs · Combicon connection · PA 20 AC2267 4 inputs / 4 outputs Active AS-i module · String mounting possible · Addressing socket · Version 2.1 · Combicon connection · PA 6.6 21 AC2258 Product selectors and further information can be found at: www.ifm.com 486 Bus system AS-interface Type Inputs / outputs Description Drawing no. Order no. 4 inputs / 4 outputs Active AS-i module · String mounting possible · Addressing socket · Input supply from external PELV voltage source · Version 2.1 · Combicon connection · PA 6.6 21 AC2259 4 inputs 4...20 mA Active AS-i module · AS-i profile S-7.3 · 4 analogue inputs 4...20 mA · For the connection of 2-wire, 3-wire or 4-wire sensors · Combicon connector for sensor connection · PA 6.6 19 AC2216 4 inputs 0...10 V Active AS-i module · AS-i profile S-7.3 · 4 analogue inputs 0...10 V · For the connection of 2-wire, 3-wire or 4-wire sensors · Combicon connector for sensor connection · PA 6.6 19 AC2217 4 outputs 0...20 mA Active AS-i module · AS-i profile S-7.3 · 4 analogue outputs 0...20 mA · For the connection of 2-wire actuators or 4-wire actuators with separate 24 V supply · Combicon connector for actuator connection · PA 6.6 19 AC2218 4 outputs 0...10 V Active AS-i module · AS-i profile S-7.3 · 4 analogue outputs 0...10 V · For the connection of 2-wire actuators or 4-wire actuators with separate 24 V supply · Combicon connector for actuator connection · PA 6.6 19 AC2219 4 inputs Pt100 Active AS-i module · 4 analogue inputs temperature Pt100 · AS-i profile S-7.3 · Combicon connection · PBT 19 AC2220 4 inputs / 4 outputs; bidirectional Active AS-i module · PCB size 105 x 45 x 17 mm · Digital inputs and outputs 22 AC2709 4 inputs / 3 outputs; bidirectional Active AS-i module · AS-i slave with extended addressing mode · PCB size 105 x 45 x 17 mm · Digital inputs and outputs 22 AC2739 2 inputs / 1 LED output Active AS-i module · Only suited for mechanical contacts 23 AC2729 3 inputs / 3 outputs Active AS-i module · AS-i version 2.1 with extended addressing mode 24 AC2731 Description Drawing no. Order no. Field modules IP 67 Type Inputs / outputs 4-way splitter box ClassicLine splitter box module · Three orientations of the flat cable are possible · AS-i and AUX splitter box for the connection of intelligent sensors/actuators · Sockets M12 x 1 · PA 25 AC5200 4 inputs Active ClassicLine module · Addressing socket · Three orientations of the flat c able are possible · Digital inputs · Sockets M12 x 1 · PA 25 AC5205 4 inputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · Digital inputs · Sockets M12 x 1 · PA 25 AC5215 3 outputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · Digital outputs · Sockets M12 x 1 · PA 25 AC5203 4 outputs Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Digital outputs · Sockets M12 x 1 · PA 25 AC5208 You can find scale drawings from page 502 487 Bus system AS-interface Type Inputs / outputs Description Order no. 4 outputs Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Digital outputs · Sockets M12 x 1 · PA 25 AC5213 2 outputs / 2 inputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · Digital outputs and inputs · Sockets M12 x 1 · PA 25 AC5214 2 inputs / 2 outputs Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Digital inputs and outputs (2 A) · Sockets M12 x 1 · PA 25 AC5211 8 digital inputs (2 Slaves) Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · Digital inputs · Sockets M12 x 1 · PA 26 AC5210 4 inputs / 4 outputs; bidirectional Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Digital inputs and outputs · Sockets M12 x 1 · PA 26 AC5209 4 inputs / 4 outputs; bidirectional Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Digital inputs and outputs (2 A) · Sockets M12 x 1 · PA 26 AC5212 4 inputs / 3 outputs; bidirectional Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Version 2.11 and 3.0 with extended addressing mode · Digital inputs and outputs · Sockets M12 x 1 · PA 26 AC5204 4 inputs / 4 outputs; bidirectional Active ClassicLine module · Only for operation with AS-i masters with the profile M4 · Addressing socket · Three orientations of the flat cable are possible · Version 3.0 with extended addressing mode · Digital inputs and outputs · Sockets M12 x 1 · PA 26 AC5235 4 inputs / 4 outputs; bidirectional Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Version 3.0 with extended addressing mode · Digital inputs and outputs (2 A) · Sockets M12 x 1 · PA 26 AC5236 2 pushbuttons / 2 LED displays Active module upper parts AS-i illuminated pushbutton module · Power supply via AS-i cable · A/B slave · Pushbutton functions: normally open / normally closed · PBT – AC2088 2 pushbuttons / 2 LED displays Active module upper parts AS-i illuminated pushbutton module · Power supply via AS-i cable · Colour inserts changeable · PBT 27 AC2086 1 pushbutton / 1 key-operated switch / 1 LED display Active module upper part AS-i illuminated pushbutton module with key-operated switch · Power supply via AS-i cable · Illuminated pushbutton colour and cover upper parts selectable · Version 2.1 with extended addressing mode · PBT 27 AC2087 4 inputs 4...20 mA Active ClassicLine module · AS-i profile S-7.3 · 4 analogue inputs 4...20 mA · IR addressing possible · For the connection of 2-wire, 3-wire or 4-wire sensors · Sockets M12 x 1 · PBT 28 AC2516 4 inputs 0...10 V Active ClassicLine module · AS-i profile S-7.3 · 4 analogue inputs 0...10 V · IR addressing possible · For the connection of 2-wire, 3-wire or 4-wire sensors · Sockets M12 x 1 · PBT 28 AC2517 4 outputs 0...20 mA Active ClassicLine module · AS-i profile S-7.3 · IR addressing possible · 4 analogue outputs 0...20 mA · For the connection of 2-wire actuators · Sockets M12 x 1 · PBT 28 AC2518 4 outputs 0...10 V Active ClassicLine module · AS-i profile S-7.3 · 4 analogue outputs 0...10 V · IR addressing possible · For the connection of 2-wire actuators · Sockets M12 x 1 · PBT 28 AC2519 4 inputs Pt100 Active ClassicLine module · 4 analogue inputs temperature Pt100 · AS-i profile S-7.3 · IR addressing possible · Sockets M12 x 1 · PBT 28 AC2520 Product selectors and further information can be found at: www.ifm.com 488 Drawing no. Bus system AS-interface Type Inputs / outputs Description Drawing no. Order no. 2 inputs 4...20 mA Active ClassicLine module · 2 analogue inputs 4...20 mA · For the connection of 2-wire and 3-wire sensors · Addressing socket · Three orientations of the flat cable are possible · PA 25 AC5222 2 inputs 4...20 mA Active ClassicLine module · 2 analogue inputs 4...20 mA · For the connection of 2-wire and 4-wire sensors · Electrical isolation · Addressing socket · Three orientations of the flat cable are possible · PA 25 AC5223 2 outputs / 2 inputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · Outputs supplied from AS-i · Digital outputs and inputs · Sockets M12 x 1 · PA 25 AC5224 4 inputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · Digital inputs · Sockets M12 x 1 · PA 25 AC5245 4 inputs / 3 outputs; bidirectional Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Version 2.11 and 3.0 with extended addressing mode · Digital inputs and outputs · Sockets M12 x 1 · PA 26 AC5274 4 inputs / 4 outputs; bidirectional Active ClassicLine module · Only for operation with AS-i masters with the profile M4 · Addressing socket · Three orientations of the flat cable are possible · Version 3.0 with extended addressing mode · Digital inputs and outputs · Sockets M12 x 1 · PA 26 AC5275 4 inputs / 3 outputs; bidirectional Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · inputs externally supplied · Sockets M12 x 1 · PA 26 AC5292 2 IO-Link ports Active ClassicLine module · 2 IO-Link ports · For the connection of IO-Link sensors and actuators, binary sensors and binary actuators · Addressing socket · Three orientations of the flat cable are possible · PA 25 AC5225 4 inputs Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · Digital inputs · Sockets M12 x 1 · PA 25 AC505A 4 inputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · Digital inputs · Sockets M12 x 1 · PA 25 AC515A 4 outputs Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · Digital outputs · Sockets M12 x 1 · PA 25 AC508A 2 inputs / 2 outputs Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · Digital inputs and outputs (2 A) · Sockets M12 x 1 · PA 25 AC507A 2 outputs / 2 inputs Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · Three orientations of the flat cable are possible · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · Digital outputs and inputs · Sockets M12 x 1 · PA 25 AC514A 2 inputs 4...20 mA Active AS-i module · 2 analogue inputs 4...20 mA · For the connection of 2-wire and 3wire sensors · Addressing socket · Three orientations of the flat cable are possible · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA 25 AC522A 2 inputs Active AS-i module 25 AC5230 4 inputs / 4 outputs; bidirectional Active ClassicLine module · Only for operation with AS-i masters with the profile M4 · Addressing socket · Version 3.0 with extended addressing mode · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · Digital inputs and outputs · Sockets M12 x 1 · PA 26 AC535A 4-way splitter box Passive compact module · AS-i splitter box for the connection of intelligent sensors/actuators · Sockets M12 x 1 · PA 6.6 / socket: brass nickel-plated / threaded inserts in the lower part: brass nickel-plated / O-Ring : Viton 29 AC2413 You can find scale drawings from page 502 489 Bus system AS-interface Type Inputs / outputs Description Drawing no. Order no. 4 inputs Active CompactLine module · IR addressing possible · Digital inputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickel-plated / ORing : Viton 30 AC2410 4 inputs Active CompactLine module · IR addressing possible · Version 2.11 and 3.0 with extended addressing mode · Digital inputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickel-plated / O-Ring : Viton 30 AC2457 4 inputs Active CompactLine module · IR addressing possible · high-grade stainless steel · Digital inputs · Sockets M12 x 1 · PA / socket: stainless steel 316L / 1.4404 / threaded inserts in the lower part: stainless steel 316L / 1.4404 / screws in the lower part: stainless steel 30 AC2451 4 inputs Active CompactLine module · Digital inputs · Sockets M12 x 1 · PA / socket: brass nickelplated / threaded inserts in the lower part: brass nickel-plated / O-Ring : Viton 31 AC2464 4 outputs Active CompactLine module · IR addressing possible · Digital outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickel-plated / O-Ring : Viton 32 AC2417 2 inputs / 2 outputs Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickelplated / O-Ring : Viton 32 AC2411 2 inputs / 2 outputs Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickelplated / O-Ring : Viton 32 AC2458 4 inputs / 4 outputs; bidirectional Active CompactLine module · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickel-plated / O-Ring : Viton 33 AC2465 4 inputs / 4 outputs; bidirectional Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickelplated / O-Ring : Viton 34 AC2412 4 inputs / 4 outputs; bidirectional Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickelplated / O-Ring : Viton 34 AC2459 4 inputs / 4 outputs; bidirectional Active CompactLine module · IR addressing possible · External sensor supply PELV · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: brass nickel-plated / threaded inserts in the lower part: brass nickel-plated / O-Ring : Viton 34 AC2466 4 inputs / 4 outputs; bidirectional Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA / socket: stainless steel 316L / 1.4404 / threaded inserts in the lower part: stainless steel 316L / 1.4404 / screws in the lower part: stainless steel 34 AC2452 4 inputs Active AS-i module · Version 2.1 with extended addressing mode · Digital inputs · Sockets M8 x 1 · PA / O-ring: FPM 35 AC2480 Drawing no. Order no. Universal modules Type Inputs / outputs Description 4 inputs Active module upper part AS-universal module · Digital inputs · Connection via cage clamps · PBT / stainless steel 36 AC2032 4 inputs / 4 outputs; bidirectional Active module upper part AS-universal module · Digital inputs and outputs · Connection via cage clamps · PBT / stainless steel 37 AC2035 Product selectors and further information can be found at: www.ifm.com 490 Bus system AS-interface Type Inputs / outputs Description Drawing no. Order no. 2 inputs 4...20 mA Active AS-i module IP 65 · 2 analogue inputs 4...20 mA · AS-i profile S-7.3 · For the connection of 2-wire, 3-wire or 4-wire sensors · Connection via cage clamps · PBT 38 AC2616 2 inputs 0...10 V Active AS-i module IP 65 · 2 analogue inputs 0...10 V · AS-i profile S-7.3 · For the connection of 2-wire, 3-wire or 4-wire sensors · Connection via cage clamps · PBT 38 AC2617 2 outputs 0...20 mA Active AS-i module IP 65 · 2 analogue outputs 0...20 mA · AS-i profile S-7.3 · For the connection of 2-wire actuators or 4-wire actuators with separate 24 V supply · Connection via cage clamps · PBT 38 AC2618 2 outputs 0...10 V Active AS-i module IP 65 · 2 analogue outputs 0...10 V · AS-i profile S-7.3 · For the connection of 2-wire actuators or 4-wire actuators with separate 24 V supply · Connection via cage clamps · PBT 38 AC2619 4 inputs Pt100 Active AS-i module IP 65 · 4 analogue inputs temperature Pt100 · AS-i profile S-7.3 · Connection via cage clamps · PBT 37 AC2620 Drawing no. Order no. Field modules IP 69K and accessories Type Inputs / outputs Description 4 inputs / 3 outputs Active ProcessLine module · Version 2.1 with extended addressing mode · Protection rating IP 69K · high-grade stainless steel · Digital inputs and outputs · Sockets M12 x 1 · high-grade stainless steel / Makrolon / O-ring: EPDM 39 AC2904 8 digital inputs (2 Slaves) Active ProcessLine module · Version 2.1 with extended addressing mode · Protection rating IP 69K · high-grade stainless steel · Digital inputs · Sockets M12 x 1 · high-grade stainless steel / Makrolon / O-ring: EPDM 40 AC2910 8-way splitter box Passive splitter box AS-i ProcessLine · Protection rating IP 69K · high-grade stainless steel · AS-i and AUX splitter box for the connection of intelligent sensors/actuators · Sockets M12 x 1 · high-grade stainless steel / Makrolon 41 AC2900 4 inputs 4...20 mA Active AS-i module · 4 analogue inputs 4...20 mA · For the connection of 2-wire and 3wire sensors · Threaded bush: stainless steel 316L / 1.4404 / Makrolon / O-ring: EPDM 42 AC2916 AS-i / 24 V FC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket · Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM – E70354 AS-i FC splitter · AS-i voltage via M12 socket · Metal parts: stainless steel 316L / 1.4404 / Oring: EPDM / socket: PP GF30 / blade seal: TPE – E70454 AS-i / 24 V FC splitter · Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM – E70377 Description Drawing no. Order no. 43 AC5000 Module lower parts Type Inputs / outputs FC coupling module Module lower part flat cable · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT You can find scale drawings from page 502 491 Bus system AS-interface Type Inputs / outputs Description Drawing no. Order no. FC-E coupling module with external power supply FC-E coupling module · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT 43 AC5003 FC coupling module Module lower part flat cable · with addressing plug · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT 44 AC5010 FC-E coupling module with external power supply FC-E coupling module · with addressing plug · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT 44 AC5011 FC coupling module Module lower part flat cable · stainless steel · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT / stainless steel 43 AC5014 FC-E coupling module with external power supply FC-E coupling module · stainless steel · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT / stainless steel 43 AC5015 SC coupling module Module lower part screw connection · AS-i interface to module upper part · Screw terminal · PBT 45 AC5031 Drawing no. Order no. Pneumatic and actuator solutions Type Inputs / outputs Description 2 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Addressing socket · AS-i profile S-3.F.F · PA / POM 46 AC5227 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 46 AC5228 4 inputs / 2 outputs; AirBox supply via external 24 V DC AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 46 AC5243 4 inputs / 1 output ; AirBox supply via AS-i AS-i AirBox · 5/2-way slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 47 AC5246 4 inputs / 1 output; AirBox supply via external voltage 24 V DC AS-i AirBox · 5/2-way slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 47 AC5249 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 5/2-way bistable slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 46 AC5251 4 inputs / 2 outputs; AirBox supply via external 24 V DC AS-i AirBox · 5/2-way bistable slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 46 AC5253 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 5/3-way slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · PA / POM 46 AC5270 4 inputs / 2 outputs; AirBox supply via external 24 V DC AS-i AirBox · 5/3-way slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Addressing socket · Version 2.11 and 3.0 with extended addressing mode · PA / POM 46 AC5271 Product selectors and further information can be found at: www.ifm.com 492 Bus system AS-interface Type Inputs / outputs Description Drawing no. Order no. 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flat cable are possible · Digital inputs · Addressing socket · AS-i profile S-7.F.F · Versions 2.11 and 3.0 · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA / POM 46 AC542A 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA / POM 46 AC528A 4 inputs / 1 output ; AirBox supply via AS-i AS-i AirBox · 5/2-way slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA / POM 47 AC546A 2 inputs / 1 output; AirBox supply via AS-i AS-i AirBox · 5/2-way slide valve free from overlapping · Three orientations of the flat cable are possible · Digital inputs · Addressing socket · AS-i profile S-3.F.F · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA / POM 46 AC246A 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 5/2-way bistable slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA / POM 46 AC551A 4 inputs / 2 outputs; AirBox supply via AS-i AS-i AirBox · 5/3-way slide valve free from overlapping · Three orientations of the flat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended addressing mode · Addressing socket · ATEX approval · Group II, category 3D · Only in conjunction with impact protection housing E7000A or equivalent protection · PA / POM 46 AC570A 2 x 2 inputs / 2 outputs AS-i AirBox · Connection to the pneumatic system by tube fittings · Manual override by pressing/releasing or pressing/turning/locking · 2 x 2 digital inputs · 2 pneumatic outputs · Sockets M12 x 1 · housing: PBT / Metal parts: stainless steel / sealing: Viton 48 AC2055 2 inputs / 1 output NO/NC selectable (monostable) AS-i AirBox · Connection to the pneumatic system by tube fittings · 1 x 2 or 2 x 1 digital inputs · 1 pneumatic output (NO/NC selectable) · Sockets M12 x 1 · housing: PBT / Metal parts: stainless steel / sealing: Viton 49 AC2057 2 inputs / 1 output Dual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 · Connector · PBT / PC / plug / socket stainless steel 50 AC2310 1 x 2 inputs Dual sensor · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 with extended addressing mode · Connector · PBT / connector housing: stainless steel 51 AC2315 2 inputs / 1 output Dual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 with extended addressing mode · Connector · PBT / PC / plug / socket stainless steel 50 AC2316 2 inputs / 2 outputs Dual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 with extended addressing mode · Connector · PBT / PC / plug / socket stainless steel 50 AC2317 1 x 2 inputs Dual sensor · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 with extended addressing mode · ATEX approval · Group II, category 3D · Connector · PBT / connector housing: stainless steel 51 AC315A 2 inputs / 1 output Dual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 with extended addressing mode · ATEX approval · Group II, category 3D · Connector · PBT / PC / plug / socket stainless steel 50 AC316A 2 inputs / 2 outputs Dual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1 with extended addressing mode · ATEX approval · Group II, category 3D · Connector · PBT / PC / plug / socket stainless steel 50 AC317A 3 inputs / 4 outputs MOVIMOT module for SEW drives · Digital inputs and outputs 52 AC1151 2 inputs / 1 serial interface MOVIMOT module for SEW drives · Easy selection of preset frequencies · RS-485 interface · Digital inputs and outputs · Sockets M12 x 1 · PBT 53 AC1150 You can find scale drawings from page 502 493 Bus system AS-interface Safety at Work Type Description Drawing no. Order no. AS-i safety monitor · Basic version · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal · polyamide black 54 AC001S AS-i safety monitor · Basic version · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal · polyamide black 54 AC002S AS-i safety monitor · Extended functionality · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal 54 AC003S AS-i safety monitor · Extended functionality · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal 54 AC004S AS-i safety monitor · Extended functionality and integrated safe slave for triggering a safe AS-i output · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON V3.0 · Screw terminal · polyamide black 55 AC031S AS-i safety monitor · Extended functionality and integrated safe slave for triggering a safe AS-i output · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON V3.0 · Screw terminal 55 AC032S Safe active AS-i module · Performance Level e to EN ISO 13849-1 et IEC 61508 / SIL 3 for the connection of mechanical contacts · Combicon connection 56 AC009S Safe active AS-i output module · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · for the safe triggering of actuators · Combicon connection 20 AC030S Safe active AS-i module · Connection via M12x1 sockets or cage clamps · Control category 4 according to EN954-1 and IEC 61508 / SIL 3 · Version 2.1 · For connection of an electro-sensitive protective equipment (ESPE) type 4 to EN 61496-1 · AS-i interface to FC-E lower parts 57 AC007S Safe AS-i input module · IR addressing possible · AS-i version 2.1 · Performance Level e to EN ISO 13849-1 for the connection of mechanical contacts · Sockets M12 x 1 · PBT 58 AC005S Safe active AS-i ClassicLine module · IR addressing possible · AS-i version 2.1 · Category 4 to EN954-1 and IEC 61508 / SIL 3 for connection of mechanical contacts · Sockets M12 x 1 59 AC006S Illuminated E-STOP · front mounting · reset by turning · 2 NC contacts / 1 red LED · fool-proof E-STOP to EN ISO 13850 / EN 418 – E7007S Illuminated E-STOP with integrated AS-i connection · Connector M12 x 1 · AS-i interface via AS-i flat cable IP 67 · foolproof E-STOP to EN ISO 13850 / EN 418 · Pull to reset 60 AC010S Key-release E-STOP with integrated AS-i connection · Connector M12 x 1 · AS-i interface via AS-i flat cable IP 67 · foolproof E-STOP to EN ISO 13850 / EN 418 · Reset by key operation 61 AC011S safe AS-i e-stop operating unit with integrated AS-i connection · AS-i interface via M12 x 1 connector · fool-proof E-STOP to EN ISO 13850 / EN 418 · Pull to reset · interchangeable button inserts 62 AC012S Product selectors and further information can be found at: www.ifm.com 494 Bus system AS-interface Type Description Drawing no. Order no. Safe active AS-i ClassicLine module · AS-i version 2.1 · IR addressing possible · Control category 4 according to EN954-1 · For the connection of fail-safe inductive sensors of the control category 4 · Sockets M12 x 1 – AC016S AS-i safety PCB · Connection of mechanical contact and LED components · Certification according to EN 954-1 / category 4 and IEC 61508 / SIL 3 23 AC015S Fail-safe inductive sensor · GIMC-4030-US · M12 connector · PPE / diecast zinc · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 63 GM504S Fail-safe inductive sensor · GIMC-4035-US · M12 connector · PPE / diecast zinc · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 63 GM505S Fail-safe inductive sensor · GIGA-4015-US/V4A · M18 x 1 · M12 connector · high-grade stainless steel / PBT · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 64 GG505S Fail-safe inductive sensor · GIIA-4030-US/V4A · M30 x 1.5 · M12 connector · PEEK / high-grade stainless steel / O-ring: EPDM · Complies with the requirements: ISO 13849-1: category 4 · ISO 13849-1: PL e · IEC 61508: SIL 3 65 GI505S Drawing no. Order no. Inductive sensor · IFK2004BASI/M/US · M12 x 1 · Sensing range 4 mm · gold-plated contacts · Connector · V4A / active face: LCP uncoloured 66 IFC247 Inductive sensor · IGK2008BASI/M/US · M18 x 1 · Sensing range 8 mm · gold-plated contacts · Connector · threaded sleeve: V4A / active face: LCP uncoloured / lock nuts: brass 67 IGC234 Inductive sensor · IGK2012-ASI/M/US · M18 x 1 · Sensing range 12 mm · gold-plated contacts · Connector · threaded sleeve: V4A / active face: LCP uncoloured / lock nuts: brass 68 IGC235 Inductive sensor · IIK2014BASI/M/US · M30 x 1.5 · Sensing range 14 mm · gold-plated contacts · Connector · V4A / active face: LCP uncoloured 69 IIC220 Inductive sensor · IIK2022-ASI/M/US · M30 x 1.5 · Sensing range 22 mm · gold-plated contacts · Connector · V4A / active face: LCP uncoloured 70 IIC221 Inductive sensor · IMC2015-ASI/US · Sensing range 15 mm · Sensing face in 5 positions selectable · Connector · PBT / PPE 71 IM5118 Electronic pressure sensor · Analogue value (16 bit value incl. sign) · AS-i profile S-7.3 · Measuring range 0...400 bar · Connector · stainless steel / PA 72 PPA020 Electronic pressure sensor · Analogue value (16 bit value incl. sign) · AS-i profile S-7.3 · Measuring range 0...10 bar · Connector · stainless steel / PA 73 PPA024 AS-i sensors Type Description You can find scale drawings from page 502 495 Bus system AS-interface Type Description Drawing no. Order no. Read/write head · DTSLF AARWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · PA 74 DTA100 Read head · DTSLF AAROASUS01 · with integrated AS-i slave profile 7.3 · M12 connector · PA 74 DTA101 Read/write head · DTSLF MCRWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · Sensing face in 5 positions selectable · PA 71 DTA200 Read head · DTSLF MCROASUS01 · with integrated AS-i slave profile 7.3 · M12 connector · Sensing face in 5 positions selectable · PA 71 DTA201 Read/write head · DTSLF DCRWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · housing: PPE / Metal parts: diecast zinc / brass nickel-plated 75 DTA300 Combicon connectors Type Description Order no. Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 6 E70230 Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 100 E70231 Combicon connector · with cage clamps 4 poles · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 6 E70232 Combicon connector · with cage clamps 4 poles · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 100 E70233 Combicon connector · QIC · with insulation displacement terminals 4-pole (0.75...1 mm2) · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 6 E70236 Flat cable splitters and accessories Type Description PAAS M12 · AS-i and external voltage via M12 socket · Sockets M12 x 1 · Housing materials: PA 6.6 / socket housing: stainless steel 316L / 1.4404 / screws: stainless steel 316L / 1.4404 / O-Ring : Viton E70188 PAAS splitter box · Distribution of the AS-i voltage or the external 24 V supply · Housing materials: PA / screws: stainless steel 316L / 1.4404 / sealing: NBR E70200 Product selectors and further information can be found at: www.ifm.com 496 Order no. Bus system AS-interface Type Description Order no. FC splitter · Distribution of the AS-i voltage or the external 24 V supply · Housing materials: PA 6 GF35 Grivory E70381 FC splitter · AS-i voltage via M12 socket · Housing materials: Metal parts: stainless steel 316L / 1.4404 / O-ring: EPDM / socket: PP GF30 / blade seal: TPE E70454 FC splitter · AS-i voltage and external auxiliary voltage via the M12 socket · Housing materials: Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM E70354 FC splitter · Housing materials: Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM E70377 FC splitter · high-grade stainless steel · ATEX approval · Group II, category 3D/3G · AS-i voltage and external auxiliary voltage via the M12 socket · Housing materials: Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM E7354A FC splitter · ATEX approval · Group II, category 3D/3G · Distribution of the AS-i voltage or the external 24 V supply · Housing materials: Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM E7377A FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA 6-GF-FR / brass nickel-plated AC5005 FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: sealing: NBR / housing: PA / O-ring: FPM / screws: stainless steel / nut: stainless steel / Contact pins: brass gold-plated E70271 FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA E70096 FC insulation displacement connector · Distribution of the AS-i voltage and the external 24 V supply to M12 socket · 1 m · Housing materials: housing: PA 6 GF35 Grivory / Socket: PUR E70481 FC insulation displacement connector · Transition from flat cable to round cable · Cable length 2 m · 2 m · Housing materials: PA 6 GF35 Grivory / round cable: PUR / outer sheath insulation: PVC E70498 FC insulation displacement connector · Transition from flat cable to round cable · Cable length 5 m · 5 m · Housing materials: PA 6 GF35 Grivory / round cable: PUR / outer sheath insulation: PVC E70499 Flat cable insulation displacement connector E79995 FC insulation displacement connector · straight / angled E79998 You can find scale drawings from page 502 497 Bus system AS-interface Type Description Order no. Splitter box · 8 way · Cable · 25 m · Housing materials: high-grade stainless steel E11847 T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10802 T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10803 Protective cap · M12 · for M12 sockets of ClassicLine modules, CompactLine modules and AirBoxes · Housing materials: PA black E73004 Protective cap · M12 · for M12 socket to cover the unused inputs and outputs on the module; for unused inputs of splitter boxes · for ProcessLine modules · Housing materials: PVC E70297 Connector for analogue modules · for AC5222, AC5223, AC2516, AC2566 · Housing materials: PVC E75222 Accessories Safety at Work Type Description AS-i Safety at Work · ASIMON programming software · Version 3.0 · Configuration, set-up and diagnostics of the AS-i safety monitor E7040S Connection cable PC / AS-i safety monitor · Parameter setting cable PC / AS-i safety monitor · Western connector RJ 45 8 poles / DSub socket 9 poles · 2.5 m E7001S Connection cable AS-i safety monitor / AS-i safety monitor · Download cable AS-i safety monitor / AS-i safety monitor · Western connector RJ 45 8 poles · 0.3 m E7002S EMERGENCY STOP label IP66 4 languages D,GB,F,I · EMERGENCY STOP label 4 languages for a safe illuminated EMERGENCY STOP button with integrated AS-i interface AC010S · 50 x 50 mm E7003S EMERGENCY STOP protective collar · EMERGENCY STOP protective collar for safe E-STOP AC010S / AC011S E7004S bridging plug for safety modules · Housing materials: PUR E7005S Adapter plug · straight · M20 - M12 · M12 connector · 0.07 m · Housing materials: polyamide E7006S Product selectors and further information can be found at: www.ifm.com 498 Order no. Bus system AS-interface Accessories lower parts and addressing units Type Description Order no. AS-i addressing unit · AS-i version 3.0 with extended addressing mode AC1154 Addressing cable · for AS-i slaves · 1.6 m E70213 Addressing cable · for the addressing of active AS-i compact modules E70423 Addressing cable · for the addressing of active AS-i modules with infrared addressing interface · 1 m E70211 Programming cable for controller E · Western connector RJ11 6 poles / D-Sub socket 9 poles · 1.55 m E70320 Module lower part screw connection · Screw terminal · Housing materials: PBT AC5031 Screw terminal insert for AC5101/AC5031 for additional 24 V supply AC5007 impact protection housing · for ATEX ClassicLine modules and ATEX AirBoxes · Housing materials: stainless steel E7000A Use of the lower part as branching box · Housing materials: plastics AC3000 AS-i flat cable · reverse polarity protection due to special shape · 100 m · for use in isolation displacement connector technology for FC lower parts and compact modules AC4001 AS-i flat cable · reverse polarity protection due to special shape · 100 m · for use in isolation displacement connector technology for FC lower parts and compact modules AC4006 AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lower parts and compact modules AC4000 AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lower parts and compact modules AC4002 AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lower parts and compact modules AC4003 You can find scale drawings from page 502 499 Bus system AS-interface Type Description Order no. AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lower parts and compact modules AC4004 AS-i flat cable · for the food industry · reverse polarity protection due to special shape · 100 m AC4007 AS-i flat cable · for the food industry · reverse polarity protection due to special shape · 100 m AC4008 JOKARI flat cable stripping tool E70062 Flat cable blank · Length: 60 mm · to cover the unused cable entry · for FC splitter E70354 · Housing materials: silicone rubber blue · Pack quantity: 10 E70299 Flat cable blank · Length: 60 mm · to cover the unused cable entry · for CompactLine modules (AC24xx), ClassicLine modules (AC52xx) or AirBoxes (AC52xx) · Housing materials: EPDM black · Pack quantity: 10 E70399 Heat-shrink cap · for sealing the flat cable ends · Housing materials: plastics · Pack quantity: 10 E70113 Flat cable seal · Housing materials: ULTRAMID / sealing: NBR · Pack quantity: 10 E70413 Cable clip for fixing the AS-i flat cable · Housing materials: PA 6.6 · Pack quantity: 100 E70067 Accessories pneumatic components Type Description Silencer · Housing materials: connection piece: PP / filter: PE · Pack quantity: 10 E75232 Push-in T-fitting · Housing materials: housing: PBT / release ring: polyoxymethylene / tooth lock washer: stainless steel / form ring: acrylonitrile butadiene caoutchouc · Pack quantity: 10 E75227 Push-in L-fitting · Housing materials: housing: PBT / release ring: polyoxymethylene / tooth lock washer: stainless steel / form ring: acrylonitrile butadiene caoutchouc · Pack quantity: 10 E75228 Product selectors and further information can be found at: www.ifm.com 500 Order no. Bus system AS-interface Accessories RFID Type Description Order no. ID tag · ID-TAG/M5x16.5/01 · M5 x 16.5 mm · Screw mounting · Housing materials: PA black (RAL 9005) E80301 ID tag · ID-TAG/TRIANGLE HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302 Angle bracket · Housing materials: stainless steel E80304 ID tag · ID-TAG/M18x1/01 · M18 x 1 mm · Screw mounting · in metal · Housing materials: threaded sleeve: PBT orange E80311 ID tag · ID-TAG/D12x2/01 · Ø 12 x 2 mm · Housing materials: PPS black E80312 ID tag · ID-TAG/D20x2.15/01 · Ø 20 x 2.15 mm · Housing materials: polycarbonate black E80317 ID tag · ID-TAG/D30x2.15/01 · Ø 30 x 2.15 mm · Housing materials: polycarbonate black E80318 ID tag · ID-TAG/D50x2.2/01 · Ø 50 x 2.2 mm · Housing materials: polycarbonate black E80319 ID tag · ID-TAG/ISO-Card/01 · 54 x 86 x 1 mm · Housing materials: PVC white E80320 RFID Handheld Reader USB · suitable for use in PCs or notebooks · 125 kHz · 1.8 m · Housing materials: PS E80321 ID tag · ID-TAG/D26x4/01 · Ø 26 x 4 mm · Housing materials: PA High Temperature E80322 RFID Handheld Reader CF Card · suitable for use in handheld PCs, pocket PCs or PDAs with CompactFlash interface · 125 kHz E80323 Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730 You can find scale drawings from page 502 501 Bus system AS-interface AS-i manuals Type Description Order no. ecolog asi system · AS-Interface Manual (German) AC0115 ecolog asi system · AS-Interface Manual (English) AC0116 Manual · AS-interface Safety at Work (German) Introduction and application examples AC115S Manual · AS-interface Safety at Work (English) Introduction and application examples AC116S Scale drawings / drawing no. – CAD download: www.ifm.com 1 3 86 85 62 62 124 138 124 131 LED LED 4 4 LED 57 68 97 107 4 2 86 62 86 124 131 124 131 62 1 LED 2 4 4 LED 97 107 1: LED, 2: DeviceNet interface Product selectors and further information can be found at: www.ifm.com 502 97 107 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 8 5 86 91 29 138 124 131 62 LED 4 97 107 6 9 83 106,2 128,2 135,5 44 93 1 2 M12 x1 90 LED 7 65,5 62,8 45 1: tune button, 2: mode selector 10 LED Jumper 4 124 131 128,2 49 96 107 503 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 14 11 73 49 LED LED Jumper 98 109 1: Jumper 96 107 4 4 124 131 124 131 1 15 12 118,5 113 120 118,5 113 134 134 120 16 13 91 118,5 112,5 124 131 50 LED 4 134 Jumper Product selectors and further information can be found at: www.ifm.com 504 96 107 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 21 17 129 50 105 35,5 100 114 124 131 LED 1 Jumper 2 4 111 122 1: LED, 2: Addressing socket 18 22 22,5 110 45 74 78 35,5 105 23 21 19 9 UU U 105 U 25 32 35,5 114 44 LEDs 9 10 10 1 24 1: Addressing socket 65,5 A- A+ 40,5 I3 I2 I1 I+ I-O1O2 O3 20 105 25 35,5 108 25 2 1 1: Addressing socket, 2: LED 505 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 29 26 118,2 107 5 60 2 4 1 3 4,7 4,5 M12x1 7,5 27 23 27 28,5 39 30 80 30 118,2 107 45 5 60 3 4 1 2 M12x1 28 4,7 4,5 83 7,5 27 23 44 28,5 39 M12 x1 LED 31 118,2 107 5 90 60 3 4 1 2 4,7 4,5 M12x1 27 23 28,5 39 Product selectors and further information can be found at: www.ifm.com 506 7,5 M12x1 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 35 32 5 38,5 60 118,2 107 4,5 3 4 1 2 100 108 20,6 M12x1 LED 4,5 M 8 x1 4,7 4,5 100 28,5 39 7,5 36 27 23 102 80 50 45 LEDs 33 60 37 7 8 102 80 71 6 3 4 1 2 91 107 152 5 5 M12x1 50 4,7 4,5 LED 28,5 39 M12x1 7,5 38 102 27 23 71 80 91 34 60 7 8 50 6 3 4 LED 5 5 152 39 36 80 107 137,3 2 M12x1 18 M12 x1 1 4,5 7,5 M12 x1 LED 64,9 43,6 8,2 27 23 4,7 2 28,5 39 507 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 44 40 36 80 18 6 M12 x1 20 80 43,6 LED 5,3 1 8,2 31 45 M12 x1 9,6 64,9 2 35 7 137,3 7 41 7 66 7 36 80 137,3 18 M12 x1 1: Addressing socket 64,9 2 45 43,6 8,2 6 33 M12 x1 82,5 80 42 35 9,6 36 80 5,3 31 45 7 18 M12 x1 7 137,3 M12 x1 64,9 2 43,6 LED 7 7 66 8,2 46 43 85 80 0 20 1 6 2 91 108 35 9,6 5,3 4 7 0 7 31 45 1 7 Product selectors and further information can be found at: www.ifm.com 508 1 50 66 40 7 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 50 47 55 85 35 26 60 40 91 108 M12 x1 2 4 0 LED M12 x1 LED LED 40 1 50 1 13 2 1 1: sensor 1, 2: sensor 2 48 51 12 15 80 55 35 26 60 44 46 40 LED 8 mm M12 x1 M12 x1 LED LED 45 LED 49 80 2 5 13 1 50 52 1: sensor 1, 2: sensor 2 52 66 40 LED M12 x1 97 107 45 8 mm 60 19 3,8 20,5 M12 x1 M12 x1 4 mm 19 36 509 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 57 53 102 71 80 91 111 49,4 80 45,5 50 LED 54 58 45 80 M12 x1 LED 45 104 35,5 25 120 LED 55 59 44 90 120 45 LED 82,6 35,5 102 105,9 1 80 91,2 M12 x1 1: fixture infrared adapter 60 56 105 35,5 108 56 105 25 93,5 LEDs 66,5 Product selectors and further information can be found at: www.ifm.com 510 72 M12 x1 UU U 1: Addressing socket 58,5 U 1 80 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 65 61 80 69 67 39 56 105 M12 x1 M30 x1,5 15 LED 4 x 90° 5 36 66 93,5 M12 x1 M12 x1 72 58,5 M12 x1 60 49 40 4 LED 4 x 90° 66,5 17 80 67 62 56 104 M12 x1 M18 x1 60 49 47 40 4 LED 4 x 90° 208 24 80 M12x1 68 120 60 49 47 30 10 M12 x1 M18 x1 72 63 4 66 LED 4 x 90° 40 24 34 M12 x1 40 69 60 49 47 43 17 5,4 M12 x1 8,5 30 20 10 M30 x1,5 LED 5,4 LED 4 x 90° 5 36 33 6 46 70 61 M12 x1 15 M12 x1 10 M18 x1 90,5 79 55 M30 x1,5 60 49 47 28 64 LED 4 x 90° 5 36 4 LED 8 x 45° 24 511 Bus system AS-interface Scale drawings / drawing no. – CAD download: www.ifm.com 73 71 66 54 46 40 5,5 88 29,5 30 2 40 30 M12 x1 LED 1,3 13,5 1 46 30 G1 4 21,5 27 5,5 30 M12 x1 2 74 1: LED yellow, 2: LED green 24 56 41 LED 17 1 72 5,5 70 55 53,5 2 30 M12 x1 M12 x1 4,5 90,6 17 4,2 LED 2 5 1,3 15,7 30 G 21,5 27 14 1: integrated antenna , 2: tag positioning mark (middle of the antenna) 75 112 92 40 9,3 5,5 65 80 M12 x1 65 1: mounting on DIN rail Product selectors and further information can be found at: www.ifm.com 512 20 40 7,5 1 17 LED Bus system AS-interface 513 Identification systems 514 Identification systems Multicode reading systems System description / System overview Product selection chart Wiring diagrams Scale drawings / drawing no. – CAD download: www.ifm.com 516 - 517 518 - 521 521 521 RF-identification systems System description / System overview Product selection chart Scale drawings / drawing no. – CAD download: www.ifm.com 522 - 523 524 527 - 528 515 Identification systems Orientation-independent identification of 1D and 2D codes. Very small housing for flexible use. Simple, menu-guided parameter setting. Integrated lighting. High reading reliability even with soiled / damaged codes. Multicode reader The ECC200 Data Matrix code is becoming more and more popular throughout industry alongside familiar barcodes. In this code lots of information can be stored in a very small space and read using the compact multicode reader. The industrially compatible mounting and wiring technology as well as the standardised process interfaces RS-232, Ethernet TCP/IP and EtherNet/IP enable easy and quick integration into the industrial control technology. Applications can be found in many different industrial areas: from the product tracking and production control to product identification. Orientation-independent reading Independent of the orientation and the number of codes, the high-performance algorithms automatically decode 1D or 2D codes. The optimisation parameters of the codes and functions of the multicode reader undergo continuous development and are made available as upgrades. Code comparison in the sensor Complex application programming is no longer necessary due to adjustable, selective code identification and comparison in the sensor. This allows a defined number of characters within a code to be checked and signalled via the switching output if they match. Reliable identification of 1D and 2D codes In addition to the automatic exposure setting, manual adjustment is also possible. So optimum results are achieved even with highly reflective metal surfaces. For evaluation of the code quality parameter, ISO / IEC 15415 or 16022 can be used. The Data Matrix code The Data Matrix code is a two-dimensional code containing much more information with the same structure size than codes such as bar codes or stacked codes. Several thousand characters can be stored in one code. An important feature of the Data Matrix code is the high reading reliability. If the code is soiled or damaged, the intelligent system can completely recompose the information from different segments again. The Data Matrix code can be structured differently and is variable in shape and size. The size can cover 1 x 1 mm to 100 x 100 mm. 516 Lose no time: The multicode reader can be configured in a few minutes and is then ready for use. Only five guided steps are necessary for the multicode reader to be ready for operation. Whether printed on paper, graved by laser or dot-peened on metal: Reliable detection of the code, independent of the sensor orientation. Multicode reading systems System overview Page Multicode reader 518 Illumination units 518 Software 518 - 519 Fixing components 519 - 520 Protective panes and diffusers 520 Connection technology 520 Wiring diagrams 521 Scale drawings / drawing no. – CAD download: www.ifm.com 521 517 Identification systems Multicode reader Type Dimensions [mm] Max. field of view size [mm] Type of light Motion speed int. / ext. lighting LED [m/s] Process interface Drawing no. Order no. M12 plug, 8 poles M12 socket, 4 poles · Connector groups 17, 18 60 x 42 x 53.5 68 x 50 red light 3/5 Ethernet TCP/IP, EtherNet/IP, RS-232 1 O2I100 60 x 42 x 53.5 140 x 100 red light 3/5 Ethernet TCP/IP, EtherNet/IP, RS-232 1 O2I102 60 x 42 x 59 400 x 300 red light 3/5 Ethernet TCP/IP, EtherNet/IP, RS-232 2 O2I104 60 x 42 x 53.5 68 x 50 infrared 3/5 Ethernet TCP/IP, EtherNet/IP, RS-232 1 O2I101 60 x 42 x 53.5 140 x 100 infrared 3/5 Ethernet TCP/IP, EtherNet/IP, RS-232 1 O2I103 60 x 42 x 59 400 x 300 infrared 3/5 Ethernet TCP/IP, EtherNet/IP, RS-232 2 O2I105 Drawing no. Order no. 3 O2D909 Illumination units Type Dimensions Type of light [mm] Active illuminated area [mm] I0 normal light intensity [mA] I0 high light intensity [mA] Trigger M12 connector · metal · DC · Wiring diagram no. 1 · Connector groups 9, 11, 107, 108, 135 42 x 42 x 31 red – 180 90 External; 24 V PNP to IEC61131-1 Software Type Description Number of connections Order no. Operating software · O2I · for multicode reader · Create and manage application-specific configurations Monitor mode for set-up and service Service reports for statistical evaluations – E2I200 Multicode reader OPC server · Software · German/English 25 E2I210 Multicode reader OPC server · Software · German/English 50 E2I211 Product selectors and further information can be found at: www.ifm.com 518 Multicode reading systems Type Description Number of connections Order no. Multicode reader OPC server · Software · German/English 75 E2I212 Multicode reader OPC server · Software · German/English 100 E2I213 Fixing components Type Description Order no. Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 12 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D110 Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D112 clamp · Ø 12 mm; M10 · free-standing M10 · Housing materials: clamp: stainless steel E20946 clamp · Ø 12 mm · rod mounting Ø 12 mm · Housing materials: clamp: stainless steel E21110 clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: stainless steel E20948 clamp · Ø 14 mm · rod mounting Ø 14 mm · Housing materials: clamp: stainless steel E21109 mounting rod · Ø 12 · Length: 200 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21112 mounting rod · Ø 12 · Length: 300 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21113 mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938 mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940 mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939 You can find wiring diagrams and scale drawings from page 521 519 Identification systems Type Description Order no. mounting rod · Ø 14 / M12 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20941 Connection piece · Ø 20 mm · for the connection of two clamps with Ø 20 mm · Housing materials: stainless steel 316L / 1.4404 E21076 Protective panes and diffusers Type Description Order no. Plastic diffuser · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21165 Plastic protective pane for the food industry · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21166 Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168 Laser protection pane plastic · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA / filter: polycarbonate E21169 Connection technology Type Description Jumper · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898 Jumper · straight / straight · Ethernet · Patch cable · 2 m · Housing materials: PUR / PC E12090 Jumper · straight / straight · Ethernet · Cross-over patch cable · 10 m · Housing materials: PUR / PC E12204 Jumper · straight / straight · Ethernet · Cross-over patch cable · 20 m · Housing materials: PUR / PC E12205 Product selectors and further information can be found at: www.ifm.com 520 Order no. Multicode reading systems Wiring diagrams 1 1 L+ 4 2 3 L Scale drawings / drawing no. – CAD download: www.ifm.com 1 2 1 42 3 1 42 2 53,5 3 2 59 21 20,5 24,5 44 1: display, 2: Focus setting, 3: Centre of the lens axes 25,2 38,5 9,5 M12x1 M12x1 7 M12x1 M12x1 49,5 1: display, 2: Focus setting, 3: Centre of the lens axes 3 LED 42 LED M12 x1 31 30 19,7 33 4,3 7 54 9,5 19 19 4,3 80 45 57 60 24,5 4,3 80 45 57 60 20,5 21 14 24 521 Identification systems Industrially compatible RFID solutions in 125 kHz or UHF technology. Connection via AS-Interface (125 kHz) or Ethernet (UHF). All components integrated into industrially compatible housings. High reading reliability even under difficult operating conditions. Easy to mount and set up. RF-identification systems The constant increase of the degree of automation in modern production plants is increasingly supported by identification systems. Their tasks include, for example, the control or release of production steps or the assignment of information about each product in logistics. Operating principle The RFID system generates an electromagnetic field for reading and writing data. The electromagnetic field emitted by the antenna induces voltage in the passive ID tag. The activated ID tag (transponder) transmits the code to the fieldbus interface via the evaluation electronics. 125 kHz system with AS-Interface ifm electronic supplies the first RFID system for AS-Interface (AS-i) worldwide. It allows reading and writing of code carriers (ID tags), benefiting from the advantages of AS-i. The ID tag provides flexibility for different types of installation. Up to 31 read / write heads can be connected to one AS-i master. Antenna, electronics and AS-i interface are integrated in a compact housing. Voltage is supplied via AS-i. No additional operating voltage required. The typical ranges of the 125 kHz system are some centimetres. UHF system with Ethernet As components of the UHF system platform, the read / write units DTE800 for Europe and DTE900 for the USA are compliant with 865-870 MHz and 902-928 MHz respectively. The data transmission and parameter setting are carried out via Ethernet. The ultra-low and low-range antennas are distinguished by the near field. In order to achieve a high selectivity, the smallest possible designs are used as they manage short reading ranges. Due to its smaller dimensions the mid-range antenna is chosen for applications in the near / far field with reading ranges of up to 2 m. The wide-range antenna have been developed for applications in the far field where reading ranges of up to 7 m are required. 522 The ID tag is mounted to tanks or workpiece carriers – in the tag fixture or alternatively by direct mounting using an M5 grub screw. RF-identification systems System overview RFID systems ID tags Page 524 524 - 525 Handheld readers 525 Fixing components 525 RFID systems 526 RFID systems 526 ID tags 526 RFID systems 527 Scale drawings / drawing no. – CAD download: www.ifm.com 527 - 528 523 Identification systems RFID systems Type Dimensions [mm] Travel speed read / write [m/s] Process interface Drawing no. Order no. M12 connector · Connector groups 9, 11, 107, 108, 135 55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) write: only static AS-i 1 DTA100 55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) AS-i 1 DTA101 40 x 40 x 54 read: ≤ 0.5 (distance to the ID tag 30 mm) write: only static AS-i 2 DTA200 40 x 40 x 54 read: ≤ 0.5 (distance to the ID tag 30 mm) AS-i 2 DTA201 92 x 80 x 40 read: ≤ 0.5 (distance to the ID tag 40 mm) write: only static AS-i 3 DTA300 92 x 80 x 40 read: ≤ 0.5 (distance to the ID tag 40 mm) AS-i 3 DTA301 ID tags Type Description ID tag · ID-TAG/M5x16.5/01 · M5 x 16.5 mm · Screw mounting · Housing materials: PA black (RAL 9005) E80301 ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302 ID tag · ID-TAG/M18x1/01 · M18 x 1 mm · Screw mounting · in metal · Housing materials: threaded sleeve: PBT orange E80311 ID tag · ID-TAG/D12x2/01 · Ø 12 x 2 mm · Housing materials: PPS black E80312 ID tag · ID-TAG/D20x2.15/01 · Ø 20 x 2.15 mm · Housing materials: polycarbonate black E80317 ID tag · ID-TAG/D30x2.15/01 · Ø 30 x 2.15 mm · Housing materials: polycarbonate black E80318 Product selectors and further information can be found at: www.ifm.com 524 Order no. RF-identification systems Type Description Order no. ID tag · ID-TAG/D50x2.2/01 · Ø 50 x 2.2 mm · Housing materials: polycarbonate black E80319 ID tag · ID-TAG/D26x4/01 · Ø 26 x 4 mm · Housing materials: PA High Temperature E80322 ID tag · ID-TAG/ISO-Card/01 · 54 x 86 x 1 mm · Housing materials: PVC white E80320 Handheld readers Type Description Order no. RFID Handheld Reader USB · suitable for use in PCs or notebooks · 125 kHz · 1.8 m · Housing materials: PS E80321 RFID Handheld Reader CF Card · suitable for use in handheld PCs, pocket PCs or PDAs with CompactFlash interface · 125 kHz E80323 RFID Handheld Reader RS-232 · suitable for use in PCs or notebooks · 125 kHz · Housing materials: PS E80324 Fixing components Type Description Order no. Angle bracket · Housing materials: stainless steel E80304 Mounting set · Clamp mounting · aluminium profile · for type OC · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20901 Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730 Mounting set · Clamp mounting · aluminium profile · for type OC · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc E20901 Dovetail clamp · for type DTS, O4, O5 · Housing materials: AlMgSi0.5 E21088 You can find scale drawings from page 527 525 Identification systems RFID systems Type Dimensions Operating frequency [mm] [MHz] Transmission power [mW ERP] Number of antenna inputs Process interface Output Drawing no. Order no. M12 connector · Connector groups 9, 11, 107, 108, 135 233.5 x 270 x 68 865-868 (ETSI) 2000 4 Ethernet TCP/IP 2 external digital inputs and 2 outputs through M12 connector 4 DTE800 233.5 x 270 x 68 902...928 (FCC) 2000 4 Ethernet TCP/IP 2 external digital inputs and 2 outputs through M12 connector 4 DTE900 Protection Drawing no. Order no. RFID systems Type Dimensions Operating frequency Antenna gain Max. input power [mm] [MHz] [cBic] [mW] 63 x 28 x 90 865...928 -30 1000 IP 67 5 ANT805 63 x 28 x 90 865...870 -15 500 IP 67 5 ANT810 126 x 37 x 156 865...870 4 – IP 67 6 ANT820 271 x 270 x 42 865...870 8.5 – IP 67 7 ANT830 63 x 28 x 90 902...928 (FCC) -15 500 IP 67 5 ANT910 271 x 270 x 42 902...928 8.5 – IP 67 7 ANT930 TNC socket ID tags Type Description ID tag · ID-TAG/D50x3.3/04 · Ø 50 x 3.3 mm · Housing materials: PA 6 E80350 ID tag · ID-TAG/D55x13/04 · Ø 55 x 13 mm · Housing materials: PA 6 E80351 Product selectors and further information can be found at: www.ifm.com 526 Order no. RF-identification systems RFID systems Type Description Order no. Jumper · straight / straight · For RFID antenna · 3 m E80330 Jumper · straight / straight · For RFID antenna · 6 m E80331 Clamp · For RFID antenna · Housing materials: fixture: steel sheet galvanised / screws: stainless steel / Fixing strap: stainless steel E80340 Scale drawings / drawing no. – CAD download: www.ifm.com 1 3 24 112 56 92 41 LED 1 5,5 20 17 40 M12 x1 17 4,2 65 80 M12 x1 5,5 55 53,5 2 70 40 9,3 4,5 65 7,5 17 1 LED 1: mounting on DIN rail 5 2 4 1: integrated antenna , 2: tag positioning mark (middle of the antenna) 233,2 2 66 54 46 40 29,5 30 2 40 270 5,5 55 68 1 46 5 30 M12 x1 2 5,5 30 63 79,5 4,2 1: LED yellow, 2: LED green 76 90 12 28 1: TNC socket 527 Identification systems Scale drawings / drawing no. – CAD download: www.ifm.com 7 6 122 9 236 271 80 126 148 4,2 138 156 15 270 37 1: TNC socket 1: TNC socket Product selectors and further information can be found at: www.ifm.com 528 42 RF-identification systems 529 Control systems for mobile vehicles Controllers, I/O modules, displays and sensors for mobile applications. Compact and extremely robust design. Extensive range of accessories for installation and diagnostics. CAN interface with CANopen protocol. e1 type approval of the German Federal Office for Motor Traffic. Control technology for mobile applications Life today cannot be imagined without electronics in modern motor vehicles and mobile machines. Many necessary and convenient functions could not be implemented without electronic support. In contrast to electronics in consumer goods and “normal” industrial applications such as packaging machines and conveyors the requirements for components for mobile applications are much higher. Electronic requirements The components need to be carefully selected, mainly because of the extreme mechanical stress caused by impacts and shocks and the use at extreme operating temperatures. The direct influence of dirt, humidity and water often cannot be excluded in field applications. Therefore a high protection rating and a special selection of the materials are required for the devices. In addition to mechanical and environmental influences, electrical interference affecting the whole system as well as individual devices, have to be taken into account. A wide supply voltage range and well-adapted protective measures ensure safe operation of the devices even in case of large voltage fluctuations by the battery / generator system. Strong conducted or radiated interference must not influence the function either. For device networking the CAN bus has become the successful standard in the last few years. Whereas for the high volume production of passenger cars special, optimised and well-adapted protocols are used, the CANopen protocol has become indispensable in mobile machines. Manufacturer and industry-specific protocols, such as diagnostic engine data according to SAE J 1939, can be coupled to the machine process via gateways. 530 Extreme shock and vibration: Reliable function of the sensitive electronics must be guaranteed under harsh operating conditions as well. Especially when several machine parts are interconnected CAN offers decisive advantages. Control systems for mobile vehicles System overview Page BasicController 533 Starter set ecomatmobile Basic 533 Accessories for BasicController 533 BasicRelay 534 Accessories for BasicRelay 534 BasicDisplay 534 Accesssories for BasicDisplay 534 16-bit ClassicController 534 32-bit ClassicController 535 16-bit ExtendedController 535 32-bit ExtendedController 535 16-bit SafetyController 535 16-bit SmartController 535 CabinetController for use in control cabinets 536 Accessories and software 536 CompactModules 536 CompactModules metal 536 - 537 SmartModules 537 CabinetModules 537 KeypadModules 537 PDM360 smart with 2.5" monochrome display 537 PDM360 compact with 3.8" monochrome display 538 PDM360 with 5.7" display 538 PDM360 NG with 7" display 538 Camera systems for PDM360 color 538 Remote maintenance and data storage 539 Interface and diagnosis 539 Inclination sensors 539 Inductive sensors for mobile applications Absolute multiturn - encoders (CANopen) for mobile applications Electronic pressure sensors for mobile applications 540 - 542 542 543 - 545 531 Control systems for mobile vehicles System overview Converters and PWM modules Page 545 Connection technology for control systems 545 - 548 Accessories 549 - 550 Connection technology with signal converter 550 Load-dump modules 550 Accessories for sensors for mobile applications 550 - 551 Wiring diagrams 551 Scale drawings / drawing no. – CAD download: www.ifm.com 552 Product selectors and further information can be found at: www.ifm.com 532 Control systems for mobile vehicles BasicController Type Inputs / outputs Description Drawing no. Order no. 20 BasicController · 12 inputs / 8 outputs · 2 CAN interfaces · Configurable input / output functions · Programming according to IEC 61131-3 · 8...32 V DC 1 CR0401 24 BasicController · 12 inputs / 12 outputs · 2 CAN interfaces · Configurable input / output functions · Programming according to IEC 61131-3 · 8...32 V DC 2 CR0403 Starter set ecomatmobile Basic Type Description Starter set ecomatmobile Basic Order no. EC0400 Accessories for BasicController Type Description Order no. Cover · for BasicController CR040x and BasicRelay CR042x · incl. cable seal EC0401 Cover · for BasicController CR040x · Built-in display recess for BasicDisplay CR0451 · incl. cable seal EC0402 Jumper · wired · for 2 BasicControllers CR040x · CAN interface · Power supply · 0.5 m EC0451 Jumper · wired · for 1 BasicController CR040x and 1 BasicDisplay CR0451 · CAN interface · Power supply · M12 connector · 0.1 m EC0452 Jumper · wired · for 2 BasicControllers CR040x and 1 BasicDisplay CR0451 · CAN interface · Power supply · M12 connector · 0.5 m EC0453 Plug set · for BasicController CR040x · wirable · Complete set of contacts / contact housings utilising all connections to a BasicController EC0456 CANfox · CAN/RS232-USB interface · Programming and diagnosis of CAN systems · 5 V DC (via USB interface) EC2112 Adapter cable · for CAN interface CANfox · CAN adapter: DIN connector, 6 poles / M12 connector, 5 poles · RS-232 adapter: DIN connector, 6 poles / Sub-D plug, 9 poles · Cable length 1 m EC2113 You can find wiring diagrams and scale drawings from page 551 533 Control systems for mobile vehicles BasicRelay Type Inputs / outputs – Description BasicRelay · Locations for 6 automotive relays and 10 automotive fuses ( (6.3 mm) · 2 supply rails and 6 power distributors · freely wirable Drawing no. Order no. 3 CR0421 Accessories for BasicRelay Type Description Order no. Set of contacts · for BasicRelay CR0421 · wirable · utilising all connections to a BasicRelay EC0457 Cover · for BasicController CR040x and BasicRelay CR042x · incl. cable seal EC0401 BasicDisplay Type Inputs / outputs – Description BasicDisplay · 2.8" colour display · 5 freely programmable backlit function keys · Rocker switch for cursor function · CAN interface · Programming according to IEC 61131-3 · 8...32 V DC Drawing no. Order no. 4 CR0451 Accesssories for BasicDisplay Type Description Order no. Mounting frame · for BasicDisplay CR0451 · panel · Housing materials: steel sheet EC0403 16-bit ClassicController Type Inputs / outputs Description Order no. 24 ClassicController · Programmable mobile controller type R 360 · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 24 inputs/outputs · 10...32 V DC 5 CR0505 40 ClassicController · Programmable mobile controller type R 360 · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 40 inputs/outputs · 10...32 V DC 5 CR0020 Product selectors and further information can be found at: www.ifm.com 534 Drawing no. Control systems for mobile vehicles 32-bit ClassicController Type Inputs / outputs 32 Description ClassicController · 32 Bit · Programmable mobile controller type R 360 · 32-bit processor · 16 inputs / 16 outputs · 4 CAN interfaces · Configurable input / output functions · Programming according to IEC 61131-3 · CoDeSys 2.3 · 10...32 V DC Drawing no. Order no. 5 CR0032 Drawing no. Order no. 6 CR0200 Drawing no. Order no. 6 CR0232 Drawing no. Order no. 16-bit ExtendedController Type Inputs / outputs 80 Description ExtendedController · 16 Bit · Programmable mobile controller type R 360 · Configurable input / output functions · Programming according to IEC 61131-3 · 2 control units · 80 inputs/outputs · 10...32 V DC 32-bit ExtendedController Type Inputs / outputs 80 Description ExtendedController · 32 Bit · Programmable mobile controller type R 360 · 32-bit processor · Configurable input / output functions · Programming according to IEC 611313 · 80 inputs/outputs · 10...32 V DC 16-bit SafetyController Type Inputs / outputs Description 24 SafetyController · Programmable mobile controller type R 360 · for safety applications · SILcl 2 (IEC 62061) · PL d (EN ISO 13849-1) · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 24 inputs/outputs · 10...32 V DC 5 CR7506 40 SafetyController · Programmable mobile controller type R 360 · for safety applications · SILcl 2 (IEC 62061) · PL d (EN ISO 13849-1) · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 40 inputs/outputs · 10...32 V DC 5 CR7021 80 SafetyController · Programmable mobile controller type R 360 · for safety applications · SILcl 2 (IEC 62061) · PL d (EN ISO 13849-1) · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 80 inputs/outputs · 10...32 V DC 6 CR7201 Drawing no. Order no. 7 CR2500 16-bit SmartController Type Inputs / outputs 12 Description SmartController · Programmable mobile controller type R 360 · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 8 inputs / 4 outputs · 10...32 V DC You can find wiring diagrams and scale drawings from page 551 535 Control systems for mobile vehicles CabinetController for use in control cabinets Type Inputs / outputs Description Drawing no. Order no. 42 CabinetController · Programmable mobile controller type R 360 · Configurable input / output functions · Programming according to IEC 61131-3 · 24 inputs / 18 outputs · 10...32 V DC 8 CR0301 36 CabinetController · Programmable mobile controller type R 360 · Configurable input / output functions · Programming according to IEC 61131-3 · 24 inputs / 12 outputs · 10...32 V DC 9 CR0302 42 CabinetController · Programmable mobile controller type R 360 · 2 nd CAN interface for gateway function according to SAE J 1939 · Configurable input / output functions · Programming according to IEC 61131-3 · 24 inputs / 18 outputs · 10...32 V DC 10 CR0303 Drawing no. Order no. Programming software CoDeSys · for configuration, programming and diagnosis of ifm controller systems · German version · incl. the DVD „Software, tools and documentation„ – CP9006 Programming software CoDeSys · for configuration, programming and diagnosis of ifm controller systems · English version · incl. the DVD „Software, tools and documentation„ – CP9008 Starter set ecomat R 360 Smart Controller · consisting of: · controller CR2500 · I/O simulator box incl. connection cable and connectors · plug-in power supply · DVD with programming software CoDeSys · project examples and manuals – EC2074 Drawing no. Order no. Accessories and software Type Description CompactModules Type Inputs / outputs Description 8 CompactModule · Output module digital and analogue for R 360 systems · CAN interface · Configurable input / output functions · 8 outputs · Connector M12 x 1 · 10...32 V DC 11 CR2011 8 CompactModule · I/O module digital and analogue for R 360 systems · CAN interface · Configurable input / output functions · 8 inputs / 4 outputs · Connector M12 x 1 · Programming according to IEC 61131-3 · 10...32 V DC 11 CR2013 Drawing no. Order no. CompactModules metal Type Inputs / outputs Description 8 CompactModule Metal · Output module digital and analogue for R 360 systems · CAN interface · CAN parameters adjustable via coding switch · Configurable input / output functions · 8 outputs · Connector M12 x 1 · Surface electrostatically coated (cathodic immersion) · 10...32 V DC 12 CR2031 16 CompactModule Metal · I/O module digital and analogue for R 360 systems · CAN interface · CAN parameters adjustable via coding switch · Configurable input / output functions · 8 inputs / 8 outputs · Connector M12 x 1 · Surface electrostatically coated (cathodic immersion) · 10...32 V DC 13 CR2032 Product selectors and further information can be found at: www.ifm.com 536 Control systems for mobile vehicles Type Inputs / outputs 12 Description CompactModule Metal · I/O module digital and analogue for R 360 systems · CAN interface · CAN parameters adjustable via coding switch · Configurable input / output functions · 8 inputs / 4 outputs · Connector M12 x 1 · Surface electrostatically coated (cathodic immersion) · 10...32 V DC Drawing no. Order no. 14 CR2033 Drawing no. Order no. SmartModules Type Inputs / outputs Description 12 SmartModule · I/O module digital and analogue for R 360 systems · CAN interface · 4 inputs / 8 outputs · Configurable input / output functions · 10...32 V DC 7 CR2512 12 SmartModule · I/O module digital and analogue for R 360 systems · CAN interface · 8 inputs / 4 outputs · Configurable input / output functions · 10...32 V DC 7 CR2513 Drawing no. Order no. CabinetModules Type Inputs / outputs Description 16 CabinetModule · I/O module digital and analogue for R 360 systems · CAN interface · 16 inputs/outputs · Configurable input / output functions · 10...32 V DC 15 CR2012 16 CabinetModule · I/O module digital and analogue for R 360 systems · CAN interface · 16 inputs/outputs · CAN parameters adjustable via coding switch · Configurable input / output functions · 10...32 V DC 16 CR2014 32 CabinetModule · I/O module digital and analogue for R 360 systems · CAN interface · 16 inputs / 16 outputs · CAN parameters adjustable via coding switch · Configurable input / output functions · 10...32 V DC 17 CR2016 Drawing no. Order no. 18 CR1500 Drawing no. Order no. KeypadModules Type Description KeypadModule · CAN interface · Mounting in control cabinets and on walls · Programming according to IEC 61131-3 · 10...30 V DC PDM360 smart with 2.5" monochrome display Type Display resolution (pixels) Display type Display illumination 128 x 64 COG monochr. LED Process and dialogue module PDM360 smart · 2.5" monochrome display · 12 freely programmable backlit function keys · Programming according to IEC 61131-3 · 10...32 V DC 19 CR1070 LED Process and dialogue module PDM360 smart · 2.5" monochrome display · 12 freely programmable backlit function keys · 4 inputs / 4 outputs · Programming according to IEC 61131-3 · 10...32 V DC 19 CR1071 128 x 64 COG monochr. Description You can find wiring diagrams and scale drawings from page 551 537 Control systems for mobile vehicles PDM360 compact with 3.8" monochrome display Type Display resolution (pixels) Display type Display illumination 240 x 320 FSTN monochr. LED 240 x 320 FSTN monochr. 320 x 240 FSTN monochr. 320 x 240 FSTN monochr. Description Drawing no. Order no. Process and dialogue module PDM360 compact · 3.8" monochrome display · 3 freely programmable backlit function keys · Encoder with pushbutton · Ethernet · Programming according to IEC 61131-3 · 10...32 V DC 20 CR1052 LED Process and dialogue module PDM360 compact · 3.8" monochrome display · 3 freely programmable backlit function keys · Encoder with pushbutton · 2 inputs / 2 outputs · Real-time clock · Ethernet · Programming according to IEC 61131-3 · 10...32 V DC 20 CR1053 LED Process and dialogue module PDM360 compact · 3.8" monochrome display · 3 freely programmable backlit function keys · Encoder with pushbutton · Ethernet · Programming according to IEC 61131-3 · 10...32 V DC 21 CR1055 LED Process and dialogue module PDM360 compact · 3.8" monochrome display · 3 freely programmable backlit function keys · Encoder with pushbutton · 2 inputs / 2 outputs · Real-time clock · Ethernet · Programming according to IEC 61131-3 · 10...32 V DC 21 CR1056 Drawing no. Order no. PDM360 with 5.7" display Type Display resolution (pixels) Display type Display illumination 320 x 240 FSTN monochr. LED Process and dialogue module PDM360 · 5.7" monochrome display · 6 freely programmable backlit function keys · Encoder with pushbutton · Real-time clock · Buzzer · Programming according to IEC 61131-3 · 10...32 V DC 22 CR1050 LED Process and dialogue module PDM360 · 5.7" colour display · 6 freely programmable backlit function keys · Encoder with pushbutton · Real-time clock · Buzzer · Programming according to IEC 61131-3 · 10...32 V DC 22 CR1051 Drawing no. Order no. 320 x 240 TFT colour Description PDM360 NG with 7" display Type Display resolution (pixels) Display type Display illumination Description 800 x 480 TFT colour LED 7" colour display · 9 freely programmable backlit function keys · Encoder with pushbutton · 1 input / 1 output · Real-time clock · Buzzer · Programming according to IEC 61131-3 · 10...32 V DC 23 CR1080 800 x 480 TFT colour LED 7" colour display · 9 freely programmable backlit function keys · Rocker switch with pushbutton · 1 input / 1 output · Real-time clock · Buzzer · Programming according to IEC 61131-3 · 10...32 V DC 24 CR1081 Drawing no. Order no. Camera systems for PDM360 color Type Image resolution (pixels) Description 320 x 240 Ethernet camera · O2M · camera system for mobile vehicles · selectable image mirror function · lens heating · programming and parameter setting interface for CoDeSys 2.3 · angle of aperture 75° 25 O2M110 320 x 240 Ethernet camera · O2M · camera system for mobile vehicles · selectable image mirror function · lens heating · programming and parameter setting interface for CoDeSys 2.3 · angle of aperture 115° 25 O2M113 Product selectors and further information can be found at: www.ifm.com 538 Control systems for mobile vehicles Remote maintenance and data storage Type Description Drawing no. Order no. CAN GSM quad-band radio modem · GSM modem quad-band · for the transfer of SMS messages and data packets · 10...30 V DC 26 CR3105 CAN GSM/GPS quad-band radio modem · GSM modem quad-band · for the transfer of SMS messages and data packets · with GPS receiver for location tracking · 10...30 V DC 27 CR3106 CANmem · Data memory and logger for CANopen systems · Use of SD/MMC memory cards and PC cards to the PCMCIA standard · Parameter setting to IEC 61131 · 10...30 V DC 28 CR3101 Description Drawing no. Order no. CAN analyser · Hand-held terminal to monitor and enter data messages in CAN systems – EC2036 Description Drawing no. Order no. Inclination sensor · CAN interface · ± 15° · 2 axes · Configurable output functions · 10...32 V DC 29 CR2101 Inclination sensor · CAN interface · Analogue outputs · 4...20 mA · ± 45° · 2 axes · Configurable output functions · 10...32 V DC 30 CR2102 Inclination sensor · ± 90° · 15...30 V DC · Output 0...10 V · Cable 31 EC2019 Inclination sensor · ± 90° · Input 8...30 V DC · Output 0.5...4.5 V · Cable 31 EC2045 Inclination sensor · ± 20° · Analogue output · 4...20 mA 31 EC2060 Inclination sensor · ± 90° · Analogue output · 4...20 mA 31 EC2082 Tilt sensor · free from mercury · semi-conductor output · 10...30 V DC · Cable 32 EC2061 Interface and diagnosis Type Inclination sensors Type You can find wiring diagrams and scale drawings from page 551 539 Control systems for mobile vehicles Inductive sensors for mobile applications Type Dimensions Sensing range [mm] [mm] Cable 6 m · Output function M12 / L = 79 Cable 6 m · Output function M12 / L = 79 Cable 6 m · Output function M12 / L = 79 Cable 6 m · Output function M12 / L = 79 4f 4f 7 nf Cable 6 m · Output function M18 / L = 81 stainless steel 10...60 IP 67 / IP 69K stainless steel 10...36 Drawing no. Order no. [Hz] [mA] 400 200 33 IFM209 IP 67 / IP 69K 400 100 33 IFM207 high-grade st. steel 10...60 IP 67 / IP 69K 300 200 34 IFM210 7 nf stainless steel 10...36 100 34 IFM208 200 35 IFM205 IP 67 / IP 69K 300 · DC PNP · Wiring diagram no. 2 · Connector groups 135, 136 4f high-grade st. steel 10...60 IP 67 / IP 69K 400 · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 9 · Connector groups 135, 136 4f high-grade st. steel 10...36 IP 67 / IP 69K 400 100 35 IFM203 200 36 IFM206 · DC PNP · Wiring diagram no. 2 · Connector groups 135, 136 7 nf stainless steel 10...60 IP 67 / IP 69K 300 · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 9 · Connector groups 135, 136 7 nf high-grade st. steel 10...36 IP 67 / IP 69K 300 100 36 IFM204 IP 67 / IP 69K 200 200 37 IGM206 · DC PNP · Wiring diagram no. 1 8f stainless steel 10...60 Product selectors and further information can be found at: www.ifm.com 540 Iload · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 8 M12 connector · Output function M12 / L = 70 [V] f · DC PNP · Wiring diagram no. 1 M12 connector · Output function M12 / L = 70 Protection · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 8 M12 connector · Output function M12 / L = 70 Ub · DC PNP · Wiring diagram no. 1 M12 connector · Output function M12 / L = 70 Material Control systems for mobile vehicles Type Dimensions Sensing range [mm] [mm] Cable 6 m · Output function M18 / L = 81 Cable 6 m · Output function M18 / L = 81 Cable 6 m · Output function M18 / L = 81 8f 12 nf 12 nf Cable 6 m · Output function M30 / L = 81 Cable 6 m · Output function M30 / L = 81 Cable 6 m · Output function M30 / L = 81 Iload [Hz] [mA] Drawing no. Order no. stainless steel 10...36 IP 67 / IP 69K 200 100 37 IGM202 stainless steel 10...60 IP 67 / IP 69K 200 200 38 IGM207 stainless steel 10...36 100 38 IGM203 200 39 IGM204 IP 67 / IP 69K 200 · DC PNP · Wiring diagram no. 2 · Connector groups 135, 136 8f stainless steel 10...60 IP 67 / IP 69K 200 · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 9 · Connector groups 135, 136 8f stainless steel 10...36 IP 67 / IP 69K 200 100 39 IGM200 200 40 IGM205 · DC PNP · Wiring diagram no. 2 · Connector groups 135, 136 12 nf M12 connector · Output function M18 / L = 70 [V] f · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 8 M12 connector · Output function M18 / L = 70 Protection · DC PNP · Wiring diagram no. 1 M12 connector · Output function M18 / L = 70 Ub · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 8 M12 connector · Output function M18 / L = 70 Material stainless steel 10...60 IP 67 / IP 69K 200 · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 9 · Connector groups 135, 136 12 nf stainless steel 10...36 IP 67 / IP 69K 200 100 40 IGM201 IP 67 / IP 69K 100 200 41 IIM210 · DC PNP · Wiring diagram no. 1 12 f stainless steel 10...60 · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 8 12 f stainless steel 10...36 IP 67 / IP 69K 100 100 41 IIM202 IP 67 / IP 69K 100 200 42 IIM211 · DC PNP · Wiring diagram no. 1 22 nf stainless steel 10...60 You can find wiring diagrams and scale drawings from page 551 541 Control systems for mobile vehicles Type Dimensions Sensing range [mm] [mm] Cable 6 m · Output function M30 / L = 81 22 nf 12 f 12 f Cable 3 m · Output function 40 x 12 x 26 Cable 3 m · Output function 40 x 12 x 26 Iload Drawing no. Order no. [Hz] [mA] stainless steel 10...36 IP 67 / IP 69K 100 100 42 IIM203 stainless steel 10...60 IP 67 / IP 69K 100 200 43 IIM208 stainless steel 10...36 IP 67 / IP 69K 100 100 43 IIM200 200 44 IIM209 · DC PNP · Wiring diagram no. 2 · Connector groups 135, 136 22 nf M12 connector · Output function M30 / L = 70 [V] f · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 9 · Connector groups 135, 136 M12 connector · Output function M30 / L = 70 Protection · DC PNP · Wiring diagram no. 2 · Connector groups 135, 136 M12 connector · Output function M30 / L = 70 Ub · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 8 M12 connector · Output function M30 / L = 70 Material stainless steel 10...60 IP 67 / IP 69K 100 · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 9 · Connector groups 135, 136 22 nf stainless steel 10...36 IP 67 / IP 69K 100 100 44 IIM201 IP 67 70 – 45 IN5281 IP 67 70 – 45 IN5282 · DC PNP · Wiring diagram no. 3 4 nf PBT 10...36 · DC PNP · Wiring diagram no. 4 4 nf PBT 10...36 f = flush / nf = non flush Absolute multiturn - encoders (CANopen) for mobile applications Type Resolution Ub f Iload Shaft [V] [kHz] [mA] [mm] Ambient temperature [°C] Cable entry Drawing no. Order no. -40...85 axial 46 RM9000 M12 connector · Output function CANopen interface · Connector group 137 24 bits 10...30 – – 10 Product selectors and further information can be found at: www.ifm.com 542 Control systems for mobile vehicles Electronic pressure sensors for mobile applications Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · Wiring diagram no. 5 · Connector groups 9, 11, 12, 107, 108, 109, 135, 136 G¼ A / M5 I Operation 0...400 600 1000 9.6...36 47 PP7550 G¼ A / M5 I Operation 0...250 400 850 9.6...36 47 PP7551 G¼ A / M5 I Operation 0...100 300 650 9.6...36 48 PP7552 G¼ A / M5 I Operation 0...25 150 350 9.6...36 49 PP7553 G¼ A / M5 I Operation -1...10 75 150 9.6...36 49 PP7554 M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 6 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...400 600 1000 9.6...32 50 PA3020 G¼ I – 0...250 400 850 9.6...32 50 PA3021 G¼ I – 0...100 300 650 9.6...32 51 PA3022 G¼ I – 0...25 150 350 9.6...32 51 PA3023 G¼ I – 0...10 75 150 9.6...32 51 PA3024 G¼ I – 0...600 800 1200 9.6...32 52 PA3060 M12 connector · Output function 0...10 V analogue · Wiring diagram no. 7 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...400 600 1000 16...32 53 PA9020 G¼ I – 0...250 400 850 16...32 51 PA9021 G¼ I – 0...100 300 650 16...32 51 PA9022 You can find wiring diagrams and scale drawings from page 551 543 Control systems for mobile vehicles Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 0...10 V analogue · Wiring diagram no. 7 · Connector groups 9, 11, 107, 108, 135 G¼ I – 0...25 150 350 16...32 51 PA9023 G¼ I – 0...10 75 150 16...32 51 PA9024 M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · Wiring diagram no. 5 · Connector groups 135, 136 G¼ A / M5 I Operation 0...400 600 1000 9.6...36 47 PP000E G¼ A / M5 I Operation 0...250 400 850 9.6...36 47 PP001E G¼ A / M5 I Operation 0...100 300 650 9.6...36 48 PP002E G¼ A / M5 I Operation 0...25 150 350 9.6...36 49 PP003E G¼ A / M5 I Operation -1...10 75 150 9.6...36 49 PP004E M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 6 · Connector group 135 G¼ A – 0...400 600 1600 8.5...36 54 PT3550 G¼ A – 0...250 400 1000 8.5...36 54 PT3551 G¼ A – 0...100 200 1000 8.5...36 54 PT3552 G¼ A – 0...25 60 600 8.5...36 54 PT3553 G¼ A – 0...10 25 300 8.5...36 54 PT3554 M12 connector · Output function 0...10 V analogue · Wiring diagram no. 7 · Connector group 135 G¼ A – 0...400 600 1600 16...36 54 PT9550 G¼ A – 0...250 400 1000 16...36 54 PT9551 Product selectors and further information can be found at: www.ifm.com 544 Control systems for mobile vehicles Type Process connection Display LED Measuring range [bar] Poverload Pbursting max. [bar] min. [bar] Ub DC [V] Drawing no. Order no. M12 connector · Output function 0...10 V analogue · Wiring diagram no. 7 · Connector group 135 G¼ A – 0...100 200 1000 16...36 54 PT9552 G¼ A – 0...25 60 600 16...36 54 PT9553 G¼ A – 0...10 25 300 16...36 54 PT9554 Description Drawing no. Order no. PWM / analogue module 55 CR3001 PWM / analogue module 55 CR3002 PWM / analogue module 56 CR3003 PWM / analogue module 56 CR3004 DC/DC converter · Input 18...36 V DC · Output 10 V DC 57 EC2025 Module for current measurement with ecomat R 360 controller 58 EC2049 Converters and PWM modules Type Connection technology for control systems Type Description Order no. Cable with connector · for process and dialogue modules PDM360 · 19-pole · push-pull locking · Cable length 2 m · suitable for panel mounting or control cabinet mounting EC2077 Cable with connector · for process and dialogue modules PDM360 · 19-pole · Cable length 2 m · suitable for panel mounting, control cabinet mounting and mounting base EC2081 programming cable · e.g. for ClassicController CR0032 or ExtendedController CR0232 · wired EC2096 You can find wiring diagrams and scale drawings from page 551 545 Control systems for mobile vehicles Type Description Jumper · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080 Jumper · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898 Cable with connector · AMP 55-pole · wired · Cable length 1.2 m · Cores sealed individually · Core cross-section 1 mm2 EC2084 Cable with connector · AMP 55-pole · wired · Cable length 1.2 m · Core cross-section 1 mm2 EC2086 Cable with connector · AMP 55-pole · wired · Cable length 2.5 m · Cores sealed individually · Core cross-section 1 mm2 EC2097 Cable with connector · AMP 55-pole · wired · Cable length 2.5 m · Core cross-section 1 mm2 EC2046 Connector AMP 55-pole · wirable · with contacts (AMP Junior Timer) EC2013 Plug set for CabinetModule CR2012 / CR2014 · wirable · consisting of: · AMP Crimp housing 1 x 6 pins, 2 x 18 pins incl. Crimp contacts (Junior Power Timer) EC2053 Plug set for CabinetController CR0301 / CR0302 · wirable · consisting of: · AMP Crimp housing 1 x 6 pins, 2 x 10 pins, 3 x 18 pins incl. Crimp contacts (Junior Power Timer) EC2075 Plug set for CabinetModule CR201x · wirable · consisting of: · AMP Crimp housing 1 x 6 pins, 2 x 14 pins, 2 x 18 pins incl. Crimp contacts (Junior Power Timer) EC2089 Plug set · wirable · consisting of: · AMP Crimp housing 2 x 6 pins, 2 x 10 pins, 3 x 18 pins incl. Crimp contacts (Junior Power Timer) EC2090 Cable with connector · AMP 6-pole · wired · fully wired · Cable length 1.2 m · Core cross-section 1 mm2 EC1520 Cable with connector · AMP 10-pole · wired · fully wired · Cable length 1.2 m · Core cross-section 1 mm2 EC1521 Cable with connector · AMP 14-pole · wired · fully wired · Cable length 1.2 m · Core cross-section 1 mm2 EC1522 Product selectors and further information can be found at: www.ifm.com 546 Order no. Control systems for mobile vehicles Type Description Order no. Cable with connector · AMP 18-pole · wired · fully wired · Cable length 1.2 m · Core cross-section 1 mm2 EC1523 Adapter cable for CAN analyser and spring terminal box · 9-pole D-SUB (female) · 5-pole socket; M12 · 2-pole cable for power supply with bare ends · integrated CAN terminal resistor (120 Ω) switchable EC2050 Adapter cable for CAN devices with M12 connector (5 pole) · e.g. CANmem, CANremote or inclination sensors EC2062 Plug for Danfoss PWM valves EC2056 Plug for Danfoss PWM valves · M12 connector EC2088 CAN communication cable · cable length 2 m interface 9-pole D-SUB (female) · cable ends with lugs EC2034 Spring terminal box · Accessory for simulator and starter set EC2032 Serial interface cable · 2 x 9-pole D-SUB (female) · 1:1 · e.g. for PC communication, configuration or uploads of firmware updates · Cable length 2 m EC2063 USB connection cable · type A to type Mini B · for PC communication, configuration and uploads of firmware updates · cable length 1.8 m EC2058 RS-232 Programming adapter · with gender changer for pin-socket conversion EC2076 programming cable · cable length 2 m interface 9-pole D-SUB (female) · AMP 6-pole · Test input (AMP connector, pin 5) connected to VBB via link EC2091 programming cable · e.g. for ClassicController CR0032 or ExtendedController CR0232 · wired EC2096 Jumper · straight / straight · Ethernet · gold-plated contacts · 10 m · Housing materials: TPU E21137 Jumper · straight / straight · Ethernet · gold-plated contacts · 2 m · Housing materials: TPU E21138 You can find wiring diagrams and scale drawings from page 551 547 Control systems for mobile vehicles Type Description Jumper · straight / straight · Ethernet · gold-plated contacts · 5 m · Housing materials: TPU E21139 Socket · straight · Free from halogen · gold-plated contacts · M12 connector · 2 m · Housing materials: PUR E11596 Socket · straight · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housing materials: PUR E11597 Terminating resistor socket · straight · gold-plated contacts · M12 connector · Housing materials: TPU E11589 Plug · straight · Free from halogen · gold-plated contacts · M12 connector · 2 m · Housing materials: PUR E11598 Plug · straight · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housing materials: PUR E11599 Jumper · straight / straight · Free from halogen · gold-plated contacts · 0.3 m · Housing materials: PUR E11591 Jumper · straight / straight · Free from halogen · gold-plated contacts · 1 m · Housing materials: PUR E11592 Jumper · straight / straight · Free from halogen · gold-plated contacts · 2 m · Housing materials: PUR E11593 Jumper · straight / straight · Free from halogen · gold-plated contacts · 5 m · Housing materials: PUR E11594 Plug · straight · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housing materials: PUR E11599 Cable with connector · AMP 18-pole · wired · partially wired · for input signals · Cable length 1.2 m · Core cross-section 1 mm2 EC1524 Set of programming cables · for CAN interface CANfox · Cable BasicController: DIN connector, 6-pole / standard timer contact housing, 6-pole · Cable BasicDisplay: DIN connector, 6-pole / M12 socket, 5-pole · CAN interface · Voltage supply via individual wires with end ferrules · Cable length 1 m · 1 m EC2114 Jumper · for process and dialogue modules PDM360 NG · USB socket for installation in control panel or dashboard · 1.5 m EC2099 Product selectors and further information can be found at: www.ifm.com 548 Order no. Control systems for mobile vehicles Accessories Type Description Order no. Protective cap · M12 · for M12 sockets of CompactModule Metal · Housing materials: PA black EC2098 Snap in set · e.g. for process and dialogue monitors PDM360, PDM360 compact or PDM360 smart · for panel mounting · consisting of: · 4 plastic springs EC1452 Fixing set · e.g. for process and dialogue monitors PDM360, PDM360 compact or PDM360 smart · for control cabinet mounting · consisting of: · 4 mounting brackets, 4 cylinder screws EC1453 Mounting base · for process and dialogue modules PDM360 · for use as a desktop unit EC2083 Mounting plate · RAM mount system · Ball size 1.5„ (C) · e.g. for process and dialogue monitors PDM360 NG, PDM360, PDM360 compact or PDM360 smart · for use as a desktop unit EC1410 Mounting arm short · 90 mm · RAM mount system · Ball size 1.5„ (C) · e.g. for process and dialogue monitors PDM360 NG, PDM360, PDM360 compact or PDM360 smart · for use as a desktop unit EC1411 Mounting arm standard · 144 mm · RAM mount system · Ball size 1.5„ (C) · e.g. for process and dialogue monitors PDM360 NG, PDM360, PDM360 compact or PDM360 smart · for use as a desktop unit EC1412 Mounting arm long · 231 mm · RAM mount system · Ball size 1.5„ (C) · e.g. for process and dialogue monitors PDM360 NG, PDM360, PDM360 compact or PDM360 smart · for use as a desktop unit EC1413 Seal and vibration absorber · for process and dialogue modules PDM360 smart, PDM360 compact EC1450 Seal and vibration absorber · for process and dialogue modules PDM360 EC1451 Ethernet switch · 5 ports · Autosensing · Autocrossing · 10/100Base-TX · Redundant voltage supply · 10...30 V DC EC2095 Seal and vibration absorber · for process and dialogue modules PDM360 NG · panel · Housing materials: TPE black · Pack quantity: 5 EC2115 Mounting frame and vibration absorber · for process and dialogue modules PDM360 NG · panel · Housing materials: steel sheet EC2110 label tag · 20 x 9 mm · Housing materials: plastics white · Pack quantity: 10 E70424 You can find wiring diagrams and scale drawings from page 551 549 Control systems for mobile vehicles Type Description Protective cap · M12 · for M12 sockets of ClassicLine modules, CompactLine modules and AirBoxes · Housing materials: PA black Order no. E73004 Connection technology with signal converter Type Description Order no. plug-in power supply · with interchangeable mains plugs (EU/UK/USA/AUS) · Output 24 V DC / 1000 mA EC2059 CANremote GSM planar aerial · GSM 850/900/1800/1900 · Cable length 3 m · SMA aerial connector · flat design for mounting on all plain surfaces EC2092 CANremote GPS planar aerial · with integrated amplifier · Cable length 3 m · SMA aerial connector · flat design for mounting on all plain surfaces EC2093 SD memory card · 2 GByte · for mobile applications EC1021 Load-dump modules Type Description Order no. Load-Dump-Module · 12 V DC EC2015 Load-Dump-Module · 24 V DC EC2016 Accessories for sensors for mobile applications Type Description Programming/ display unit · for EPS and IO-Link sensors · Connector · Housing materials: stainless steel 316L / 1.4404 / PC copolymer / PBT / FPM PP2001 Mounting clamp · Ø 12 mm · with end stop · for type M12 · Housing materials: PC E11047 Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048 Product selectors and further information can be found at: www.ifm.com 550 Order no. Control systems for mobile vehicles Type Description Order no. Mounting clamp · Ø 30 mm · with end stop · for type M30 · Housing materials: PC E11049 Angle bracket · for type M12 · Housing materials: stainless steel E10735 Angle bracket · for type M18 · Housing materials: stainless steel E10736 Angle bracket · for type M30 · Housing materials: stainless steel E10737 Wiring diagrams Core colours BK black BN brown BU 3 5 7 1 BN L+ blue 2 4 BU 1 BN L+ 4 BK BU L L+ 1 OUT2 2 OUT1/Teach/ Data L 3 L+ 3 L 6 L BN BU 2 1 1 L+ L+ 2 L L L+ 4 3 L 8 9 BN L+ BN L+ 1 L+ BK L BU 1 L+ 4 BK L 4 L 3 L 551 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 4 1 12,5 25,5 18 87,5 58,6 M52x1,5 M12x1 35,2 87,5 LED B C D E 127 163 145 N2 A 31,3 5 12,3 44,2 6,5 10,5 8,5 F LED P/N1 11,2 1,5 5 225 5,5 26 20 15 45° 26 8,5 79,7 112 2 12,5 6,5 10,5 80 25,5 18 8,5 LED 43 A B C D E LED 127 163 145 N2 F 153 P/N1 8,5 79,7 112 3 12,5 25,5 18 8,5 127 163 145 6,5 10,5 8,5 79,7 112 26,5 63,5 Product selectors and further information can be found at: www.ifm.com 552 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 8 6 247 15 25 33 26 20 26 45° 108 134 80 223 LED 43 198 10 LED 9 25 33 153 4,5 223 7 132 5,5 LED 26 20 15 80 26 108 134 45° 153 198 4,5 10 LED 39 10 226 X10 X11 X12 X20 X21 N2 P/N1 7,8 5,8 133 108 43 198 553 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 14 11 60 8 5 6 5 7 39 23 69 227 205 PWR 4 5 52 6 4,7 4,5 LED M12 x1 5 2 1 M12x1 PWR DIA 4 3 CAN in 6 5 2 8 77 9 DIA 1 7 107 CAN out 152 3 7,5 15 22 18 27 28,5 39 18 LED 163 12 23 39 42,3 63 69 142,3 4,5 227 205 27 52 2 1 LED M12 x1 6 5 4 3 5 PWR DIA 6 5 CAN in 8 7 77 9 CAN out 16 18 LED 163 42,3 63 13 39 23 69 142,3 4,5 2 1 52 4 3 LED M12 x1 6 5 5 PWR DIA 6 5 CAN in 8 7 77 9 CAN out 227 205 Product selectors and further information can be found at: www.ifm.com 554 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 20 17 65,3 46,4 30 109 7 181 X11 105 82 165 X10 X20 F1 esc X21 7,8 F2 F3 5,8 P/N1 161 18 21 32 190 65,3 46,4 7 109 90 165 19 53,4 46,4 109 22 81 189 F2 F3 F4 F5 F6 7 esc 165 165 F1 63 ok 555 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 23 27 46,6 35 7 118 1 3 146 92,4 85 225 4 2 153,4 LED 6 LED 5 55 18 128 24 46,6 225 1: SMA aerial connector, 2: CANopen interface, 3: protective cover, 4: SIM card, 5: RS-232 interface 7 28 117,5 146 92,4 35 85 CARD ERROR CARD ACCESS ON ERROR CAN 153,4 LED 55 2 2,5 3 1 25 130 80 24,5 45 57 60 20,5 1 M12 x1 55 42 1: CANopen interface, 2: protective cover, 3: USB, type Mini-B (socket), 4: SD/MMC slot, 5: PCMCIA slot 4,3 30,5 5 5 LED 29 M12 x1 21,1 34,1 45,6 90 60 60 26 41 M12 x1 M12x1 6 118 35 85 LED 45 3 5,3 1 4 75 2 5 LED 5 128 1: SMA aerial connector, 2: CANopen interface, 3: protective cover, 4: SIM card, 5: RS-232 interface Product selectors and further information can be found at: www.ifm.com 556 4 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 36 30 92 60 70 59 45 5 M12 x1 M12 x1 41 M12 x1 60 6 4 LED 17 LED 90 37 81 M18 x1 5,3 45 64 57 50 75 4 LED 4 x 90° 24 31 41 38 37 52 5 64 57 40 10 24 M18 x1 5,2 41 81 4 LED 4 x 90° 32 24 39 M12 x1 8,25 12,75 6,2 M18 x1 70 59 57 50 20 2,75 5,25 81 4 33 LED 4 x 90° 24 79 62 53 70 59 57 40 4 LED 4 x 90° 10 M12 x1 17 M18 x1 5,4 M12 x1 40 34 4 LED 4 x 90° 24 79 62 48 5,4 M12 x1 5 41 4 LED 4 x 90° 81 17 64 57 53 5 M30 x1,5 35 70 59 50 36 5 M12 x1 M12 x1 LED 4 x 90° 4 LED 17 557 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 47 42 81 30 M12 x1 64 57 38 LED 4 x 90° 79,5 65,5 5 M30 x1,5 15 5 36 12 LED 30 43 1 2 70 59 57 53 M12 x1 M30 x1,5 1: Pressure relief mechanism, No mechanical force must be exerted on the pressure relief mechanism., 2: sealing FPM / DIN 3869-14 48 5 36 LED 4 x 90° M5 G 1/4 30 M12 x1 79,5 44 65,5 70 59 57 38 15 M12 x1 M30 x1,5 12 LED G 1/4 1 5 36 LED 4 x 90° M5 30 1: sealing FPM / DIN 3869-14 45 49 LED 30 M12 x1 26 LED 13 79,5 16 18 65,5 3,2 32 40 10 6 3,2 4 5 12 1 4 30 1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact with counterpart. 12 LED 1 2 M5 G 1/4 1: ventilation, 2: sealing FPM / DIN 3869-14 46 50 100 57 4 36,5 30 24 30 M12 x1 4 36 9 20 75 M12 x1 10 23 1,3 30 14 LED G1 4 21,5 27 1: Pressure relief mechanism, No mechanical force must be exerted on the pressure relief mechanism. Product selectors and further information can be found at: www.ifm.com 558 Control systems for mobile vehicles Scale drawings / drawing no. – CAD download: www.ifm.com 54 51 22 M12 x1 30 12 14 1,3 75 51,2 65,1 30 M12 x1 1 G /4 22 G1 4 21,5 27 1 1: sealing FPM / DIN 3869-14, tightening torque 25 Nm 52 55 30 M12 x1 24,5 30 49 1,3 16,5 77,5 42,5 30 3,2 56 G1 4 21,5 27 15 24,5 34 54 1: Pressure relief mechanism, No mechanical force must be exerted on the pressure relief mechanism. 42,5 3,2 53 30 M12 x1 57 15 77,5 24,5 34 54 1,3 16,5 42,5 58 32 G1 4 21,5 27 45 30 3 3 2 1 4 5 112 559 Power supplies International approval package and wide-range input for worldwide use. Partly adjustable output voltage. Power reserves to cover temporary overload or supply failure. Output short-circuit, overload, and no-load protected. State signalled via DC-ok output. Power supplies Transformer power supplies provide a low voltage, normally 24 V DC. A transformer according to DIN 0551 ensures a safe electrical separation from mains voltage and low voltage. The output voltage can be regulated (± 5 %) or smoothed by means of capacitors. The different designs and output powers allow adaptation to diverse operating conditions. Switched-mode power supplies Primary switched-mode power supplies are a compact and economical solution to supply sensors and actuators. As opposed to conventional transformer power supplies with regulated output voltage primary switched-mode power supplies need no heavy transformers so that there are fewer iron and copper losses. They are therefore distinguished by a very high degree of efficiency of up to 92 %. Due to the operating principle by means of high frequency transformers switched-mode power supplies are much smaller and lighter than transformer power supplies with identical power. Nevertheless they guarantee an electrical separation. Furthermore, they offer a wide input voltage range as standard, e.g. 340 to 576 V AC. This makes them fit for worldwide use. ifm switched-mode power supplies have a regulated output voltage of typ. 24 V DC with a tolerance of ± 2 %. Apart from few exceptions the output voltage can be set between 24 V and 28 V to compensate for example for a voltage drop on long cables. Between no load and full load they ensure a stable supply voltage and thus operational reliability in case of supply voltage fluctuations. Power reserves Mains fluctuations up to ± 15 % and mains interference are compensated for. Even mains voltage dips of a few milliseconds are compensated for, the output voltage is completely maintained. An active inrush current limitation reduces the inrush current via a fixed resistor which is bridged after start up. The outputs are protected against short circuits and overload. 560 Suitable for the application: ifm provides power supplies in different power classes. Power supplies System overview Page Power supplies / switching amplifiers with one output 562 Power supplies / switching amplifiers with 2 inputs and 2 outputs 562 Switched-mode power supplies, new BasicLine design in a robust metal housing 562 Switched-mode power supplies, single phase, new BasicLine design in a compact plastic housing 562 Standard switched-mode power supplies, single phase 563 Standard switched-mode power supplies, three phases 563 AS-i switched-mode power supplies, single phase, new ClassicLine design in a robust metal housing 564 AS-i switched-mode power supplies, single phase, new BasicLine design in a compact plastic housing 564 AS-i switched-mode power supplies, single phase, discontinued types 564 AS-i switched-mode power supplies, single phase, SilverLine 564 - 565 AS-i dual switched-mode power supplies, single phase, SilverLine 565 AS-i switched-mode power supplies, three phases, SilverLine 565 Scale drawings / drawing no. – CAD download: www.ifm.com 565 - 569 561 Power supplies Power supplies / switching amplifiers with one output Type Current Output voltage Nominal voltage Output Drawing no. Order no. [mA] [V] [V] max. 100 24 DC ±5% 230 AC (47...63 Hz) relay (1 changeover contact) 1 DN0001 max. 100 24 DC ±5% 110 AC (47...63 Hz) relay (1 changeover contact) 1 DN0012 max. 40 24 DC ±5% 230 AC (50...60 Hz) / 24 DC relay (1 changeover contact) 1 DT0001 Drawing no. Order no. 2 DN0200 Drawing no. Order no. Power supplies / switching amplifiers with 2 inputs and 2 outputs Type Current Output voltage Nominal voltage Output [mA] [V] [V] max. 300 24 V DC ± 3 % 110...240 AC / -15 / +10 2 relays (1 changeover contact per channel) Switched-mode power supplies, new BasicLine design in a robust metal housing Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 2.5 24...28 100...240 AC 450 (230 V AC; 24 V DC; 2.5 A) 87.1 3 DN3011 5 24...28 100...240 AC 205 (230 V AC; 24 V DC; 5 A) 88.9 3 DN3012 Switched-mode power supplies, single phase, new BasicLine design in a compact plastic housing Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 1.25 24...28 100...240 AC 120 (230 V AC; 24 V DC; 1.25 A) 2.5 24...28 100...240 AC 90 (230 V AC; 24 V DC; 2.5 A) Product selectors and further information can be found at: www.ifm.com 562 Drawing no. Order no. 84 4 DN1030 88 4 DN1031 Power supplies Standard switched-mode power supplies, single phase Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. Drawing no. Order no. [A] [V] [V] [ms] [%] 3 12...15 DC (±2%) 115 / 230 AC > 20 87 5 DN2021 4 24 DC (+5% / -1%) 115 / 230 AC > 37 90 6 DN2112 4.1 24...28 DC (±2%) 115 / 230 AC > 40 (230 V AC; 24 V DC / 4.1 A) 90 7 DN1022 10 24...28 DC (±2%) 115 / 230 AC > 20 90 8 DN2013 20 24...28 DC (±2%) 230 AC > 20 91 9 DN2014 20 24...28 DC, ±2% 115 / 230 AC 15 / 30 90 9 DN2114 Drawing no. Order no. Standard switched-mode power supplies, three phases Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 5 24...28 DC (±2%) 3 x 400...500 AC > 16 89 10 DN2032 10 24...28 DC (±2%) 3 x 400...500 AC > 24 90 11 DN2033 20 24...28 DC (±2%) 3 x 400 AC > 11 92 12 DN2034 20 24...28 DC (±2%) 3 x 400...500 AC; ±15% > 11 92 13 DN2134 40 24...28 DC (±2%) 3 x 400...500 AC > 15 92.5 14 DN2035 30 24...28 DC (±2%) 3 x 400...500 AC > 10 93 15 DN2036 You can find scale drawings from page 565 563 Power supplies AS-i switched-mode power supplies, single phase, new ClassicLine design in a robust metal housing Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. Drawing no. Order no. [A] [V] [V] [ms] [%] 2.8 29.5...31.6 DC 100...240 AC 330 (230 V AC) 88 16 AC1236 4 29.5...31.6 DC 100...240 AC 195 (230 V AC / 24 V DC) 88 16 AC1244 AS-i switched-mode power supplies, single phase, new BasicLine design in a compact plastic housing Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. Drawing no. Order no. [A] [V] [V] [ms] [%] 0.95 29.5...31.6 DC 100...240 AC 120 (230 V AC) 86 17 AC1220 1.9 29.5...31.6 DC 100...240 AC 90 (230 V AC) 88 17 AC1221 Drawing no. Order no. AS-i switched-mode power supplies, single phase, discontinued types Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 2.8 29.5...31.6 DC 115 / 230 AC > 10 88 18 AC1216 4 29.5...31.6 DC 115 / 230 AC > 10 90 19 AC1224 Drawing no. Order no. AS-i switched-mode power supplies, single phase, SilverLine Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 2.8 29.5...31.6 DC 115 / 230 AC > 10 88 20 AC1226 2.8 29.5...31.6 DC 115 / 230 AC > 10 88 21 AC1209 2.8 29.5...31.6 DC 24 DC > 10 87 22 AC1207 Product selectors and further information can be found at: www.ifm.com 564 Power supplies Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. Drawing no. Order no. [A] [V] [V] [ms] [%] 8 29.5...31.6 DC 115 / 230 AC > 10 92 23 AC1218 Drawing no. Order no. AS-i dual switched-mode power supplies, single phase, SilverLine Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 2x4 2 x 29.5...31.6 DC 115 / 230 AC > 10 87 24 AC1212 Drawing no. Order no. 25 AC1223 AS-i switched-mode power supplies, three phases, SilverLine Type Current Output voltage Nominal voltage Mains buffering time Efficiency typ. [A] [V] [V] [ms] [%] 8 29.5...31.6 DC 3 x 400...500 AC 22 (400V) 91.5 Scale drawings / drawing no. – CAD download: www.ifm.com 3 1 110 55 129 136 75 35,5 1 2 3 4 5 6 7 8 LEDs 1 9 10 11 12 13 14 15 16 1 1: mounting on DIN rail 136 144 50 2 22,5 120 I1 14 11 21 24 22 L N I2 4 35,5 L– 12 90 78 L+ 1: with pot. 1 LED 1: mounting on DIN rail 45 100 1: with pot. 565 Power supplies Scale drawings / drawing no. – CAD download: www.ifm.com 9 5 89 220 107 227 124 131 124 131 49 4 LED LED 89 6 89 124 131 64 LED 4 107 10 4 107 73 103 7 73 107 124 131 35,5 75 83 LED 1 LED pot. 122 4 1: jumper „single/parallel operation“ 8 11 89 120 90 1 2 124 131 131 124 3 4 5 4 6 110 121 LED 4 107 1: LED red, 2: reset push button, 3: jumper “overload performance“, 4: jumper “single/parallel operation“, 5: with pot., 6: LED green Product selectors and further information can be found at: www.ifm.com 566 Power supplies Scale drawings / drawing no. – CAD download: www.ifm.com 14 12 275 124 131 124 131 220 282 LED 89 227 LED 89 4 107 15 240 4 107 124 131 13 150 124 131 247 LED 89 157 LED 108 4 4 107 127 567 Power supplies Scale drawings / drawing no. – CAD download: www.ifm.com 20 16 49 LED 129 136 1 124 131 LED 136 144 4 50 98 109 17 1: Jumper 90 21 118,5 113 120 LED 45 134 100 18 49 LED Jumper 124 131 22 118,5 112,5 50 134 4 96 107 19 73 LED 4 124 131 Jumper 96 107 Product selectors and further information can be found at: www.ifm.com 568 Power supplies Scale drawings / drawing no. – CAD download: www.ifm.com 24 23 91 118,5 113 134 124 131 120 Jumper 96 107 25 129 LED 124 131 Jumper 4 4 LED 111 122 569 Connection technology Complete product range: sockets, plugs, jumper cables, splitter boxes. Various cable materials for different applications. High-quality materials for maximum reliability. “ecolink” series with innovative quality features. Integrated LEDs for easy diagnosis. Connection technology With a wide variety of different sensor designs ifm electronic offers a wide range of high quality connectors. The choice of types covers common M8, M12, M18 types through to valve plugs. The “ecolink” connectors (order no. EVxxxx) offer additional quality features. ecolink - a new dimension in connection technology Due to the special installation of a mechanical end stop the O-ring is always correctly compressed and so permanently maintains its sealing function. The connector remains securely positioned on the unit even in case of extreme vibration and impacts. Novel design and a transparent black housing ensure that even in bright lighting conditions the LEDs are more clearly visible than with the clear transparent versions. For industrial applications: High-quality materials suited to the requirements in industrial environments. Largely resistant to oils, greases and coolants. For hygienic and wet areas: Black, transparent housing for optimum LED visibility. PVC housing and cable, gold-plated contacts and high-grade stainless steel nuts are the optimum choice for long life. For hazardous areas Connection technology for ATEX categories 2D, 3D and 3G. With the EC type examination certificate for components from DEKRA EXAM the connection technology meets the strictest requirements. For welding applications Halogen-free PUR cables prevent burning-in of weld spatter; teflon-coated coupling nuts prevent weld spatter sticking. The cables are also suited for drag chains and torsional movements. For sensors in robust applications: The saw tooth contoured vibration protection secures against strong shocks and vibrations. The high protection rating, wide temperature range and high-quality housing materials (high-grade stainless steel, TPU) ensure permanent safe connection in harsh environments. 570 Maximum operational reliability due to the new vibration protection with end stop. Connection technology System overview Page M8 sockets for industrial applications 572 - 573 M12 sockets for industrial applications 573 - 576 M16 sockets for industrial applications 577 M18 sockets for industrial applications 577 M23 sockets for industrial applications 577 - 579 1/2" sockets for industrial applications 579 7/8" sockets for industrial applications 580 DIN sockets for industrial applications 580 RD24 sockets for industrial applications 580 M8 cable plugs for industrial applications 580 - 581 M12 cable plugs for industrial applications 581 - 582 M8 - M8 jumpers for industrial applications 582 - 585 M8 socket - M12 plug jumpers for industrial applications 585 - 588 M8 plug - M12 socket jumpers for industrial applications 588 - 590 M12 - M12 jumpers for industrial applications 591 - 595 Valve - plug jumpers for industrial applications 595 - 597 Splitter boxes for industrial applications 597 - 601 Splitter boxes for hygienic and wet areas 601 Connectors weld slag resistant 602 - 603 Jumpers weld slag resistant 603 - 604 Connectors for hygienic and wet areas 605 - 609 Jumpers for hygienic and wet areas 609 - 614 Jumpers for hygienic and wet areas 615 - 619 Connectors for hazardous areas 619 - 620 Jumpers for hazardous areas 621 Connectors for robust applications 621 - 623 Wiring diagrams 623 - 628 Scale drawings / drawing no. – CAD download: www.ifm.com 629 - 644 571 Connection technology M8 sockets for industrial applications Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 1 · Socket M8, 3-pole, 3-wire · Wiring diagram no. 1 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 1 EVC141 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 1 EVC142 10 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 1 EVC143 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 2 EVC144 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 2 EVC145 10 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 2 EVC146 Group 2 · Socket M8, 3-pole, 3-wire, LED, PNP · Wiring diagram no. 2 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 3 EVC147 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 3 EVC148 10 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 3 EVC149 PA / brass 60 AC 75 DC -25...90 IP 68 – – E11552 Group 3 · Socket M8, 3-pole · Wiring diagram no. 3 wirable – Group 4 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 4 2 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 4 EVC150 5 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 4 EVC151 Product selectors and further information can be found at: www.ifm.com 572 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 4 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 4 10 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 4 EVC152 2 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 5 EVC153 5 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 5 EVC154 10 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 5 EVC155 PA / brass 60 AC 75 DC -25...90 IP 68 – – E11553 Material housing/ nut U Ta Protection LEDs Order no. [V] [°C] Drawing no. Group 5 · Socket M8, 4-pole · Wiring diagram no. 5 wirable – M12 sockets for industrial applications Type Cable Wire specification Group 6 · Socket M12, 2-pole, 4-wire · Wiring diagram no. 6 2 m black PUR cable 2 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 6 EVC164 5 m black PUR cable 2 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 6 EVC165 10 m black PUR cable 2 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 6 EVC166 Group 7 · Socket M12, 2-pole, 2-wire · Wiring diagram no. 6 2 m black PUR cable 2 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 7 EVC161 5 m black PUR cable 2 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 7 EVC162 10 m black PUR cable 2 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 7 EVC163 You can find wiring diagrams and scale drawings from page 623 573 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 8 · socket M12, 2-pole + PE, 3-wire · Wiring diagram no. 7 2 m orange PVC cable 3 x AWG 22 (3 x 0.34 mm2), Ø 5 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 8 E10865 5 m orange PVC cable 3 x AWG 22 (3 x 0.34 mm2), Ø 5 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 8 E10866 2 m orange PVC cable 3 x AWG 22 (3 x 0.34 mm2), Ø 5 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 9 E10867 5 m orange PVC cable 3 x AWG 22 (3 x 0.34 mm2), Ø 5 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 9 E10868 Group 9 · Socket M12, 4-pole · Wiring diagram no. 5 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 250 AC/DC -25...85 IP 68 – 10 E11509 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 250 AC/DC -25...85 IP 68 – 11 E11508 Group 10 · Socket M12, 4-pole, LED, PNP · Wiring diagram no. 8 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 10...30 DC -25...85 IP 68 green / yellow 12 E11510 wirable ...0.75 mm2 (Ø 4...6 mm) PA 10...30 DC -40...85 IP 67 green / yellow 11 E10136 Group 11 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVC004 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVC005 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVC006 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVC001 Product selectors and further information can be found at: www.ifm.com 574 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 11 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVC002 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVC003 Group 12 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 9 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 15 EVC007 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 15 EVC008 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 15 EVC009 Group 13 · Socket M12, 5-pole · Wiring diagram no. 10 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 125 AC/DC -25...85 IP 68 – 16 E11512 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 125 AC/DC -25...85 IP 68 – 17 E11511 Group 14 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 11 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVC073 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVC074 10 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVC075 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVC070 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVC071 10 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVC072 You can find wiring diagrams and scale drawings from page 623 575 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 15 · Socket M12, 8-pole, 6-wire · Wiring diagram no. 12 5 m black PUR cable 6 x 0.34 mm2, Ø 6 mm TPU / diecast zinc 60 AC/DC -25...85 IP 68 – 18 E10976 10 m black PUR cable 6 x 0.34 mm2, Ø 6 mm TPU / diecast zinc 60 AC/DC -25...85 IP 68 – 18 E10977 Group 16 · socket M12, 8-pole, 7-wire + screen · Wiring diagram no. 13 2 m black PUR cable 7 x 0.25 mm2 + screen TPU / diecast zinc 60 AC/DC -25...85 IP 67 – 18 E20738 5 m black PUR cable 7 x 0.25 mm2 + screen TPU / diecast zinc 60 AC/DC -25...85 IP 67 – 19 E20838 Group 17 · socket M12, 8-pole, 8-wire, for temperature sensors TR 8... · Wiring diagram no. 14 2 m black PUR cable 8 x 0.25 mm2, Ø 6.2 mm PUR / brass 30 AC 36 DC -25...80 IP 67 – 20 E11231 5 m black PUR cable 8 x 0.25 mm2, Ø 6.2 mm PUR / brass 30 AC 36 DC -25...80 IP 67 – 20 E11232 2 m black PUR cable 8 x 0.25 mm2, Ø 6.2 mm PUR / brass 30 AC 36 DC -25...80 IP 68 – 21 E11950 5 m black PUR cable 8 x 0.25 mm2, Ø 6.2 mm PUR / brass 30 AC 36 DC -25...80 IP 68 – 21 E11807 10 m black PUR cable 8 x 0.25 mm2, Ø 6.2 mm PUR / brass 30 AC 36 DC -25...80 IP 68 – 21 E11311 Group 18 · Socket M12, 8/7-pole, 8-wire · Wiring diagram no. 15 5 m black PUR cable 8 x 0.25 mm2 TPU / brass 30 AC 36 DC -40...80 IP 68 – 20 E12168 10 m black PUR cable 8 x 0.25 mm2 TPU / brass 30 AC 36 DC -40...80 IP 68 – 20 E12169 5 m black PUR cable 8 x 0.25 mm2 TPU / brass 30 AC 36 DC -40...80 IP 67 – 21 E12166 10 m black PUR cable 8 x 0.25 mm2 TPU / brass 30 AC 36 DC -40...80 IP 67 – 21 E12167 Product selectors and further information can be found at: www.ifm.com 576 Connection technology M16 sockets for industrial applications Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 19 · socket M16, 14-pole, 10-wire · Wiring diagram no. 16 5 m black PUR cable 8 x 0.34 mm2 + 2 x 0.75 mm2, Ø 9.1 mm PUR / brass 30 DC -25...90 IP 68 – 22 E11226 10 m black PUR cable 8 x 0.34 mm2 + 2 x 0.75 mm2, Ø 9.1 mm PUR / brass 30 DC -25...90 IP 68 – 22 E11227 Group 20 · Socket M16, 14-pole, 12-wire · Wiring diagram no. 17 2 m black PUR cable 10 x 0.25 mm2 + 2 x 0.34 mm2, Ø 7.5 mm PUR / brass 30 DC -25...90 IP 67 – 23 E11645 5 m black PUR cable 10 x 0.25 mm2 + 2 x 0.34 mm2, Ø 7.5 mm PUR / brass 30 DC -25...90 IP 67 – 23 E11697 U Ta Protection LEDs Order no. [V] [°C] Drawing no. M18 sockets for industrial applications Type Cable Wire specification Material housing/ nut Group 21 · Socket M18, 4-pole · Wiring diagram no. 5 wirable ...0.75 mm2 (Ø 6...8 mm) PA 20...250 AC/DC -40...85 IP 65 – 24 E10013 wirable ...0.75 mm2 (Ø 6...8 mm) PA / ULTRAMID 20...250 AC/DC -40...85 IP 65 – 25 E10137 Material housing/ nut U Ta Protection LEDs Order no. [V] [°C] Drawing no. M23 sockets for industrial applications Type Cable Wire specification Group 22 · Socket M23, 12-pole · Wiring diagram no. 18 5 m black PUR cable 8 x 0.5 mm2 + 3 x 1.0 mm2, Ø 9.3 mm PUR / brass 63 AC/DC -25...80 IP 67 – 26 E11739 10 m black PUR cable 8 x 0.5 mm2 + 3 x 1.0 mm2, Ø 9.3 mm PUR / brass 63 AC/DC -25...80 IP 67 – 26 E11740 You can find wiring diagrams and scale drawings from page 623 577 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 22 · Socket M23, 12-pole · Wiring diagram no. 18 15 m black PUR cable 8 x 0.5 mm2 + 3 x 1.0 mm2, Ø 9.3 mm PUR / brass 63 AC/DC -25...80 IP 67 – 26 E11741 5 m black PUR cable 8 x 0.5 mm2 + 3 x 1.0 mm2, Ø 9.3 mm PUR / brass 63 AC/DC -25...80 IP 67 – 27 E11736 10 m black PUR cable 8 x 0.5 mm2 + 3 x 1.0 mm2, Ø 9.3 mm PUR / brass 63 AC/DC -25...80 IP 67 – 27 E11737 15 m black PUR cable 8 x 0.5 mm2 + 3 x 1.0 mm2, Ø 9.3 mm PUR / brass 63 AC/DC -25...80 IP 67 – 27 E11738 Group 23 · socket M23, 12-pole, numbering anticlockwise wirable ...1 mm2 (Ø 10...14 mm) brass 10...30 DC -25...90 IP 65 – 28 E10448 wirable ...1 mm2 (Ø 10...14 mm) brass 10...30 DC -25...90 IP 65 – 29 E10447 Group 24 · Socket M23, 19-pole · Wiring diagram no. 50 5 m black PUR cable 16 x 0.5 mm2 + 3 x 1.0 mm2, Ø 11.6 mm PUR / brass 63 AC/DC -25...80 IP 67 – 30 E11745 10 m black PUR cable 16 x 0.5 mm2 + 3 x 1.0 mm2, Ø 11.6 mm PUR / brass 63 AC/DC -25...80 IP 67 – 30 E11746 15 m black PUR cable 16 x 0.5 mm2 + 3 x 1.0 mm2, Ø 11.6 mm PUR / brass 63 AC/DC -25...80 IP 67 – 30 E11747 5 m black PUR cable 16 x 0.5 mm2 + 3 x 1.0 mm2, Ø 11.6 mm PUR / brass 63 AC/DC -25...80 IP 67 – 31 E11742 10 m black PUR cable 16 x 0.5 mm2 + 3 x 1.0 mm2, Ø 11.6 mm PUR / brass 63 AC/DC -25...80 IP 67 – 31 E11743 15 m black PUR cable 16 x 0.5 mm2 + 3 x 1.0 mm2, Ø 11.6 mm PUR / brass 63 AC/DC -25...80 IP 67 – 31 E11744 ...1 mm2 (Ø 10...14 mm) brass 10...30 DC -25...90 IP 65 – – E10887 Group 25 · Socket M23, 19-pole wirable Product selectors and further information can be found at: www.ifm.com 578 Connection technology Type Cable Wire specification Material housing/ nut U Ta Protection LEDs Drawing no. Order no. [V] [°C] brass 10...30 DC -25...90 IP 65 – – E10886 Material housing/ nut U Ta Protection LEDs Order no. [V] [°C] Drawing no. Group 25 · Socket M23, 19-pole wirable ...1 mm2 (Ø 10...14 mm) 1/2" sockets for industrial applications Type Cable Wire specification Group 26 · socket 1/2", 2-pole + PE, 3-wire · Wiring diagram no. 19 2 m yellow PVC cable 3 x AWG22, Ø 5.2 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 32 E10190 5 m yellow PVC cable 3 x AWG22, Ø 5.2 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 33 E10200 2 m yellow PVC cable 3 x AWG22, Ø 5.2 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 34 E10189 5 m yellow PVC cable 3 x AWG22, Ø 5.2 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 35 E10191 10 m yellow PVC cable 3 x AWG22, Ø 5.2 mm TPU / brass 250 AC 300 DC -25...90 IP 67 – 33 E10261 Group 27 · socket 1/2", 5-pole, 4-wire · Wiring diagram no. 20 5 m black PUR cable 4 x 0.34 mm2, Ø 4.7 mm TPU / brass 300 AC -25...90 IP 67 – 36 E11248 10 m black PUR cable 4 x 0.34 mm2, Ø 4.7 mm TPU / brass 300 AC -25...90 IP 67 – 36 E11249 5 m black PUR cable 4 x 0.34 mm2, Ø 4.7 mm TPU / brass 300 AC -25...90 IP 67 – 37 E11250 10 m black PUR cable 4 x 0.34 mm2, Ø 4.7 mm TPU / brass 300 AC -25...90 IP 67 – 37 E11251 You can find wiring diagrams and scale drawings from page 623 579 Connection technology 7/8" sockets for industrial applications Type Cable Wire specification Material housing/ nut U Ta Protection LEDs Drawing no. Order no. [V] [°C] 250 AC -40...80 IP 68 – 38 E20428 TPU 10...30 DC -40...80 IP 68 – 38 E20430 Material housing/ nut U Ta Protection LEDs Order no. [V] [°C] Drawing no. ... 250 AC ...300 DC -40...125 IP 65 – 39 E10058 U Ta Protection LEDs Order no. [V] [°C] Drawing no. Group 28 · socket 7/8", 2-pole + PE, 3-wire · Wiring diagram no. 21 2 m black PVC cable 3 x 0.75 mm2, Ø 5.2 mm TPU / diecast zinc Group 29 · socket 7/8", 3-pole, 3-wire · Wiring diagram no. 22 2 m black PVC cable 3 x 0.5 mm2, Ø 5.4 mm DIN sockets for industrial applications Type Cable Wire specification Group 30 · socket DIN A (DIN EN 175301-803) · Wiring diagram no. 23 wirable ...1.5 mm2 (Ø 6...8 mm) PA RD24 sockets for industrial applications Type Cable Wire specification Material housing/ nut Group 31 · socket Rd24, 6-pole + PE · Wiring diagram no. 24 wirable ...2.5 mm2 (Ø 10...12 mm) PBT 250 AC 300 DC -40...100 IP 67 – 40 E70142 wirable ...2.5 mm2 (Ø 6...8 mm) PBT / PA 250 AC 300 DC -40...100 IP 67 – 41 E11043 Material housing/ nut U Ta Protection LEDs Order no. [V] [°C] Drawing no. PA / brass 60 AC 75 DC -25...90 IP 68 – – E11550 M8 cable plugs for industrial applications Type Cable Wire specification Group 32 · Plug M8, 3-pole · Wiring diagram no. 25 wirable – Product selectors and further information can be found at: www.ifm.com 580 Connection technology Type Cable Wire specification Material housing/ nut U Ta Protection LEDs Drawing no. Order no. [V] [°C] PA / brass 60 AC 75 DC -25...90 IP 68 – – E11551 Material housing/ nut U Ta Protection LEDs Order no. [V] [°C] Drawing no. Group 33 · Plug M8, 4-pole · Wiring diagram no. 26 wirable – M12 cable plugs for industrial applications Type Cable Wire specification Group 34 · Plug M12, 4-pole, 4-wire · Wiring diagram no. 27 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 42 EVC079 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 42 EVC080 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 42 EVC081 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 43 EVC076 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 43 EVC077 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 43 EVC078 Group 35 · Plug M12, 4-pole · Wiring diagram no. 26 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 250 AC/DC -25...85 IP 68 – 44 E11505 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 250 AC/DC -25...85 IP 68 – 45 E11504 TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 46 EVC095 Group 36 · Plug M12, 5-pole, 5-wire · Wiring diagram no. 28 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm You can find wiring diagrams and scale drawings from page 623 581 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] TPU / brass 30 AC 36 DC -25...90 Protection LEDs Drawing no. Order no. IP 67 / IP 68 / IP 69K – 47 EVC094 Group 37 · Plug M12, 5-pole, 5-wire · Wiring diagram no. 29 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm Group 38 · Plug M12, 5-pole · Wiring diagram no. 30 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 125 AC/DC -25...85 IP 68 – 48 E11507 wirable ...0.75 mm2 (Ø 4...6 mm) PA / brass 125 AC/DC -25...85 IP 68 – 49 E11506 U Ta Protection LEDs Order no. [V] [°C] Drawing no. M8 - M8 jumpers for industrial applications Type Cable Wire specification Material housing/ nut Group 39 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 50 EVC275 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 50 EVC276 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 50 EVC277 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 50 EVC278 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 50 EVC279 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 51 EVC265 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 51 EVC266 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 51 EVC267 Product selectors and further information can be found at: www.ifm.com 582 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 39 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 51 EVC268 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 51 EVC269 Group 40 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 50 EVC280 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 50 EVC281 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 50 EVC282 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 50 EVC283 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 50 EVC284 Group 41 · Jumper , plug: M8, 4-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 52 EVC305 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 52 EVC306 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 52 EVC307 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 52 EVC308 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 52 EVC309 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 53 EVC315 You can find wiring diagrams and scale drawings from page 623 583 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 41 · Jumper , plug: M8, 4-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 53 EVC316 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 53 EVC317 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 53 EVC318 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 53 EVC319 Group 42 · Jumper , plug: M8, 3-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 54 EVC260 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 54 EVC261 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 54 EVC262 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 54 EVC263 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 54 EVC264 0.3 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 55 EVC270 0.6 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 55 EVC271 1 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 55 EVC272 2 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 55 EVC273 5 m black PUR cable 3 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 55 EVC274 Product selectors and further information can be found at: www.ifm.com 584 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 43 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 4-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 56 EVC300 0.6 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 56 EVC301 1 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 56 EVC302 2 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 56 EVC303 5 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 56 EVC304 Group 44 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 57 EVC310 0.6 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 57 EVC311 1 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 57 EVC312 2 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 57 EVC313 5 m black PUR cable 4 x 0.25 mm2, Ø 3.7 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 57 EVC314 LEDs Drawing no. Order no. M8 socket - M12 plug jumpers for industrial applications Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection Group 45 · Jumper , plug: M12, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 58 EVC230 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 58 EVC231 You can find wiring diagrams and scale drawings from page 623 585 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 45 · Jumper , plug: M12, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 58 EVC232 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 58 EVC233 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 58 EVC234 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 59 EVC215 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 59 EVC216 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 59 EVC217 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 59 EVC218 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 59 EVC219 Group 46 · Jumper , plug: M12, 3-pole, socket: M8, 3-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 60 EVC225 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 60 EVC226 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 60 EVC227 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 60 EVC228 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 60 EVC229 Product selectors and further information can be found at: www.ifm.com 586 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 47 · Jumper , plug: M12, 3-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 61 EVC210 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 61 EVC211 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 61 EVC212 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 61 EVC213 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 61 EVC214 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 62 EVC220 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 62 EVC221 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 62 EVC222 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 62 EVC223 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 62 EVC224 Group 48 · Jumper , plug: M12, 4-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 63 EVC235 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 63 EVC236 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 63 EVC237 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 63 EVC238 You can find wiring diagrams and scale drawings from page 623 587 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 48 · Jumper , plug: M12, 4-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 33 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 63 EVC239 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 64 EVC240 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 64 EVC241 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 64 EVC242 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 64 EVC243 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 64 EVC244 LEDs Drawing no. Order no. M8 plug - M12 socket jumpers for industrial applications Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection Group 49 · Jumper , plug: M8, 3-pole, socket: M12, 5/4-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 65 EVC245 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 65 EVC246 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 65 EVC247 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 65 EVC248 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 65 EVC249 IP 67 / IP 68 / IP 69K – 66 EVC255 Group 50 · Jumper , plug: M8, 3-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 Product selectors and further information can be found at: www.ifm.com 588 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 50 · Jumper , plug: M8, 3-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 31 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 66 EVC256 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 66 EVC257 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 66 EVC258 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 66 EVC259 Group 51 · Jumper , plug: M8, 3-pole, socket: M12, 5-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 67 EVC250 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 67 EVC251 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 67 EVC252 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 67 EVC253 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 67 EVC254 Group 52 · Jumper , plug: M8, 4-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 68 EVC285 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 68 EVC286 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 68 EVC287 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 68 EVC288 You can find wiring diagrams and scale drawings from page 623 589 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. IP 67 / IP 68 / IP 69K – 68 EVC289 Group 52 · Jumper , plug: M8, 4-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 33 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 Group 53 · Jumper , plug: M8, 4-pole, socket: M12, 5/4-pole, 3-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 69 EVC295 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 69 EVC296 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 69 EVC297 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 69 EVC298 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 50 AC 60 DC -25...90 IP 67 / IP 68 / IP 69K – 69 EVC299 Group 54 · Jumper , plug: M8, 4-pole, socket: M12, 5-pole, 3-wire, LED · Wiring diagram no. 34 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 70 EVC290 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 70 EVC291 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 70 EVC292 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 70 EVC293 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 70 EVC294 Product selectors and further information can be found at: www.ifm.com 590 Connection technology M12 - M12 jumpers for industrial applications Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 55 · Jumper , plug: M12, 3-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 31 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 71 EVC045 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 71 EVC046 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 71 EVC047 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 71 EVC048 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 71 EVC049 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 72 EVC040 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 72 EVC041 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 72 EVC042 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 72 EVC043 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 72 EVC044 Group 56 · Jumper , plug: M12, 3-pole, socket: M12, 5-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 73 EVC050 0.6 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 73 EVC051 1 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 73 EVC052 You can find wiring diagrams and scale drawings from page 623 591 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 56 · Jumper , plug: M12, 3-pole, socket: M12, 5-pole, 3-wire, LED · Wiring diagram no. 32 2 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 73 EVC053 5 m black PUR cable 3 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / IP 69K green / yellow 73 EVC054 Group 57 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVC015 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVC016 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVC017 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVC018 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVC019 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVC010 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVC011 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVC012 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVC013 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVC014 76 EVC020 Group 58 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire, LED · Wiring diagram no. 34 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 Product selectors and further information can be found at: www.ifm.com 592 IP 67 / IP 68 / green / IP 69K 2 x yellow Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 58 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire, LED · Wiring diagram no. 34 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 76 EVC021 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 76 EVC022 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 76 EVC023 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 76 EVC024 Group 59 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 33 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 77 EVC025 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 77 EVC026 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 77 EVC027 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 77 EVC028 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 77 EVC029 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 78 EVC030 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 78 EVC031 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 78 EVC032 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 78 EVC033 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 78 EVC034 You can find wiring diagrams and scale drawings from page 623 593 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 60 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire, LED · Wiring diagram no. 34 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 79 EVC035 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 79 EVC036 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 79 EVC037 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 79 EVC038 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 79 EVC039 Group 61 · Jumper , plug: M12, 5-pole, socket: M12, 5-pole, 5-wire · Wiring diagram no. 35 0.3 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVC060 0.6 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVC061 1 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVC062 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVC063 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVC064 0.3 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVC055 0.6 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVC056 1 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVC057 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVC058 Product selectors and further information can be found at: www.ifm.com 594 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 61 · Jumper , plug: M12, 5-pole, socket: M12, 5-pole, 5-wire · Wiring diagram no. 35 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVC059 0.3 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 82 EVC065 0.6 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 82 EVC066 1 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 82 EVC067 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 82 EVC068 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 82 EVC069 U Ta LEDs Order no. [V] [°C] Drawing no. Valve - plug jumpers for industrial applications Type Cable Wire specification Material housing/ nut Protection Group 62 · Jumper , plug: M12, 3-pole, valve plug: Housing A, 4-pole, 3-wire, LED · Wiring diagram no. 36 0.3 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 83 E11416 0.6 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 83 E11417 1 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 83 E11418 2 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 83 E11419 5 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 83 E11420 84 E11421 Group 63 · Jumper , plug: M12, 3-pole, valve plug: Housing B, 3-pole, 3-wire, LED · Wiring diagram no. 37 0.3 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow You can find wiring diagrams and scale drawings from page 623 595 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 63 · Jumper , plug: M12, 3-pole, valve plug: Housing B, 3-pole, 3-wire, LED · Wiring diagram no. 37 0.6 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 84 E11422 1 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 84 E11423 2 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 84 E11424 5 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 84 E11425 Group 64 · Jumper , plug: M12, 3-pole, valve plug: Housing B, 3-pole, 3-wire, LED · Wiring diagram no. 37 0.3 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 85 E11431 0.6 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 85 E11432 1 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 85 E11433 2 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 85 E11434 5 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 85 E11435 Group 65 · Jumper , plug: M12, 3-pole, valve plug: Housing C, 4-pole, 3-wire, LED · Wiring diagram no. 36 0.3 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 65 yellow 86 E11426 0.6 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 65 yellow 86 E11427 1 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 65 yellow 86 E11428 2 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 65 yellow 86 E11429 Product selectors and further information can be found at: www.ifm.com 596 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. yellow 86 E11430 Group 65 · Jumper , plug: M12, 3-pole, valve plug: Housing C, 4-pole, 3-wire, LED · Wiring diagram no. 36 5 m black PUR cable PUR / brass 3 x 0.5 mm2, Ø 5 mm 24 AC/DC -25...80 IP 65 Group 66 · Jumper , plug: M12, 3-pole, valve plug: Housing C, 4-pole, 3-wire, LED · Wiring diagram no. 36 0.3 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 87 E11436 0.6 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 87 E11437 1 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 87 E11438 2 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 87 E11439 5 m black PUR cable 3 x 0.5 mm2, Ø 5 mm PUR / brass 24 AC/DC -25...80 IP 67 yellow 87 E11440 Protection LEDs Drawing no. Order no. Splitter boxes for industrial applications Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Group 67 · splitter box M8, 3-pole · Wiring diagram no. 51 5 m black PUR cable 8 x 0.34 mm2 + 2 x 0.75 mm2, Ø 9.1 mm PBT-GF 20 10...30 DC -25...90 IP 68 green / 8 x yellow 88 E11214 10 m black PUR cable 8 x 0.34 mm2 + 2 x 0.75 mm2, Ø 9.1 mm PBT-GF 20 10...30 DC -25...90 IP 68 green / 8 x yellow 88 E11215 10...30 DC -25...90 IP 68 green / 4 x yellow 89 E11216 10...30 DC -20...80 IP 67 green / 16 x yellow 90 E11217 Group 68 · splitter box M8, 3-pole · Wiring diagram no. 52 M12 connector – PBT-GF 20 Group 69 · splitter box M8, 4-pole · Wiring diagram no. 53 5 m black PUR cable 16 x 0.34 mm2 + 2 x 0.75 mm2, Ø 11.4 mm PBT-GF 20 You can find wiring diagrams and scale drawings from page 623 597 Connection technology Type Cable Wire specification Material housing/ nut U Ta Protection [V] [°C] PBT-GF 20 10...30 DC -20...80 IP 67 10...30 DC -25...90 10...55 DC LEDs Drawing no. Order no. green / 16 x yellow 90 E11218 IP 68 green / 8 x yellow 91 E11219 -25...80 IP 67 – 92 E10437 Group 69 · splitter box M8, 4-pole · Wiring diagram no. 53 10 m black PUR cable 16 x 0.34 mm2 + 2 x 0.75 mm2, Ø 9.1 mm Group 70 · splitter box M8, 4-pole · Wiring diagram no. 54 M16 connector – PBT-GF 20 Group 71 · M12 splitter box for 1 signal · Wiring diagram no. 38 5 m black PUR cable 4 x 0.25 mm2, Ø 5 mm TPU / brass Group 72 · M12 splitter box for 1 signal · Wiring diagram no. 39 5 m black PUR cable 4 x 0.34 mm2 + 3 x 1 mm2, Ø 7.5 mm PA 60 AC 75 DC -25...80 IP 67 – 93 EBC013 10 m black PUR cable 4 x 0.34 mm2 + 3 x 1 mm2, Ø 7.5 mm PA 60 AC 75 DC -25...80 IP 67 – 93 EBC025 Group 73 · M12 splitter box for 1 signal 5 m black PUR cable 4 x 0.34 mm2 + 3 x 1 mm2, Ø 7.5 mm PA 10...30 DC -25...80 IP 67 green / 4 x yellow 94 EBC015 10 m black PUR cable 4 x 0.34 mm2 + 3 x 1 mm2, Ø 7.5 mm PA 10...30 DC -25...80 IP 67 green / 4 x yellow 94 EBC027 Group 74 · M12 splitter box for 1 signal · Wiring diagram no. 40 5 m black PUR cable 6 x 0.34 mm2 + 3 x 1 mm2, Ø 7.8 mm PA 60 AC 75 DC -25...80 IP 67 – 95 EBC017 10 m black PUR cable 6 x 0.34 mm2 + 3 x 1 mm2, Ø 7.8 mm PA 60 AC 75 DC -25...80 IP 67 – 95 EBC029 Group 75 · M12 splitter box for 1 signal · Wiring diagram no. 55 5 m black PUR cable 6 x 0.34 mm2 + 3 x 1 mm2, Ø 7.8 mm PA 10...30 DC -25...80 IP 67 green / 6 x yellow 96 EBC019 10 m black PUR cable 6 x 0.34 mm2 + 3 x 1 mm2, Ø 7.8 mm PA 10...30 DC -25...80 IP 67 green / 6 x yellow 96 EBC031 Product selectors and further information can be found at: www.ifm.com 598 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 76 · M12 splitter box for 1 signal · Wiring diagram no. 41 5 m black PUR cable 8 x 0.34 mm2 + 3 x 0.75 mm2, Ø 8.2 mm PA 60 AC 75 DC -25...80 IP 67 – 97 EBC021 10 m black PUR cable 8 x 0.34 mm2 + 3 x 0.75 mm2, Ø 8.2 mm PA 60 AC 75 DC -25...80 IP 67 – 97 EBC033 Group 77 · M12 splitter box for 1 signal · Wiring diagram no. 56 5 m black PUR cable 8 x 0.34 mm2 + 3 x 0.75 mm2, Ø 8.2 mm PA 10...30 DC -25...80 IP 67 green / 8 x yellow 98 EBC023 10 m black PUR cable 8 x 0.34 mm2 + 3 x 0.75 mm2, Ø 8.2 mm PA 10...30 DC -25...80 IP 67 green / 8 x yellow 98 EBC035 60 AC 75 DC -25...80 IP 67 – 99 EBC001 60 AC 75 DC -25...80 IP 67 – 100 EBC002 60 AC 75 DC -25...80 IP 67 – 101 EBC005 10...30 DC -25...80 IP 67 green / 6 x yellow 102 EBC006 60 AC 75 DC -25...80 IP 67 – 103 EBC009 10...30 DC -25...80 IP 67 green / 8 x yellow 104 EBC010 Group 78 · M12 splitter box for 1 signal · Wiring diagram no. 42 M23 connector – PA Group 79 · M12 splitter box for 2 signals · Wiring diagram no. 57 M23 connector – PA Group 80 · M12 splitter box for 1 signal · Wiring diagram no. 43 M23 connector – PA Group 81 · M12 splitter box for 1 signal · Wiring diagram no. 58 M23 connector – PA Group 82 · M12 splitter box for 1 signal · Wiring diagram no. 44 M23 connector – PA Group 83 · M12 splitter box for 1 signal · Wiring diagram no. 59 M23 connector – PA You can find wiring diagrams and scale drawings from page 623 599 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 84 · M12 splitter box for 2 signals · Wiring diagram no. 45 5 m black PUR cable 8 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.2 mm PA 60 AC 75 DC -25...80 IP 67 – 93 EBC014 10 m black PUR cable 8 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.2 mm PA 60 AC 75 DC -25...80 IP 67 – 93 EBC026 Group 85 · M12 splitter box for 2 signals · Wiring diagram no. 60 5 m black PUR cable 8 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.2 mm PA 10...30 DC -25...80 IP 67 green / 8 x yellow 105 EBC016 10 m black PUR cable 8 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.2 mm PA 10...30 DC -25...80 IP 67 green / 8 x yellow 105 EBC028 Group 86 · M12 splitter box for 2 signals · Wiring diagram no. 61 5 m black PUR cable 12 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.8 mm PA 60 AC 75 DC -25...80 IP 67 – 95 EBC018 10 m black PUR cable 12 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.8 mm PA 60 AC 75 DC -25...80 IP 67 – 95 EBC030 Group 87 · M12 splitter box for 2 signals · Wiring diagram no. 62 5 m black PUR cable 12 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.8 mm PA 10...30 DC -25...80 IP 67 green / 12 x yellow 106 EBC020 10 m black PUR cable 12 x 0.34 mm2 + 3 x 1.0 mm2, Ø 8.8 mm PA 10...30 DC -25...80 IP 67 green / 12 x yellow 106 EBC032 Group 88 · M12 splitter box for 1 signal · Wiring diagram no. 63 5 m black PUR cable 16 x 0.34 mm2 + 3 x 0.75 mm2, Ø 9.7 mm PA 60 AC 75 DC -25...80 IP 67 – 97 EBC022 10 m black PUR cable 16 x 0.34 mm2 + 3 x 0.75 mm2, Ø 9.7 mm PA 60 AC 75 DC -25...80 IP 67 – 97 EBC034 10...30 DC -25...80 IP 67 green / 16 x yellow 107 EBC024 Group 89 · M12 splitter box for 2 signals · Wiring diagram no. 64 5 m black PUR cable 16 x 0.34 mm2 + 3 x 1.0 mm2, Ø 9.7 mm PA Product selectors and further information can be found at: www.ifm.com 600 Connection technology Type Cable Wire specification Material housing/ nut U Ta Protection [V] [°C] 10...30 DC -25...80 IP 67 60 AC 75 DC -25...80 10...30 DC LEDs Drawing no. Order no. green / 16 x yellow 107 EBC036 IP 67 – 108 EBC003 -25...80 IP 67 green / 8 x yellow 109 EBC004 60 AC 75 DC -25...80 IP 67 – 110 EBC007 10...30 DC -25...80 IP 67 green / 12 x yellow 111 EBC008 60 AC 75 DC -25...80 IP 67 – 112 EBC011 PA 10...30 DC -25...80 IP 67 green / 16 x yellow 113 EBC012 Material housing/ nut U Ta Protection Order no. [V] [°C] Drawing no. 10...36 DC -5...70 114 E11775 Group 89 · M12 splitter box for 2 signals · Wiring diagram no. 64 10 m black PUR cable 16 x 0.34 mm2 + 3 x 1.0 mm2, Ø 9.7 mm PA Group 90 · M12 splitter box for 2 signals · Wiring diagram no. 46 M23 connector – PA Group 91 · M12 splitter box for 2 signals · Wiring diagram no. 65 M23 connector – PA Group 92 · M12 splitter box for 1 signal · Wiring diagram no. 47 M23 connector – PA Group 93 · M12 splitter box for 2 signals · Wiring diagram no. 66 M23 connector – PA Group 94 · M12 splitter box for 2 signals · Wiring diagram no. 48 M23 connector – PA Group 95 · M12 splitter box for 2 signals · Wiring diagram no. 67 M23 connector – Splitter boxes for hygienic and wet areas Type Cable Wire specification LEDs Group 96 · splitter box M12 · Wiring diagram no. 64 10 m black PUR / PVC cable 3 x 0.75 mm2 + 16 x 0.34 mm2, Ø 11 mm high-grade stainless steel IP 69K green / 16 x yellow You can find wiring diagrams and scale drawings from page 623 601 Connection technology Connectors weld slag resistant Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 97 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVW004 5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVW005 10 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVW006 2 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVW001 5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVW002 10 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVW003 Group 98 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 9 2 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 15 EVW007 5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 15 EVW008 10 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 10...36 DC -25...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 15 EVW009 Group 99 · Socket M12, 5/4-pole, 5-wire · Wiring diagram no. 11 2 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVW013 5 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVW014 10 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 13 EVW015 Product selectors and further information can be found at: www.ifm.com 602 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 100 · Socket M12, 5/4-pole, 5-wire · Wiring diagram no. 11 2 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVW010 5 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVW011 10 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 14 EVW012 Material housing/ nut U Ta LEDs Order no. [V] [°C] Drawing no. Jumpers weld slag resistant Type Cable Wire specification Protection Group 101 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 33 0.3 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVW036 0.5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVW022 1 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVW030 2 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVW031 5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 74 EVW034 Group 102 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 33 0.3 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVW037 0.5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVW023 1 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVW024 2 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K – 75 EVW025 You can find wiring diagrams and scale drawings from page 623 603 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. – 75 EVW028 Group 102 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 33 5 m grey PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass 250 AC 300 DC -25...90 IP 67 / IP 68 / IP 69K Group 103 · Jumper , plug: M12, 5-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 35 0.3 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVW054 0.6 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVW055 1 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVW056 2 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVW057 5 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVW058 10 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 80 EVW059 0.3 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVW048 0.6 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVW049 1 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVW050 2 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVW051 5 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVW052 10 m grey PUR cable 5 x 0.34 mm2, Ø 5.1 mm TPU / brass 30 AC 36 DC -25...90 IP 67 / IP 68 / IP 69K – 81 EVW053 Product selectors and further information can be found at: www.ifm.com 604 Connection technology Connectors for hygienic and wet areas Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 104 · Socket M8, 3-pole, 3-wire · Wiring diagram no. 1 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 115 EVT122 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 115 EVT123 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 115 EVT124 25 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 115 EVT125 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 116 EVT126 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 116 EVT127 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 116 EVT128 25 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 116 EVT129 Group 105 · Socket M8, 3-pole, 3-wire, LED, PNP · Wiring diagram no. 2 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 117 EVT130 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 117 EVT131 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 117 EVT132 25 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 117 EVT133 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 118 EVT134 Group 106 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 4 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 You can find wiring diagrams and scale drawings from page 623 605 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 106 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 4 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 118 EVT135 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 118 EVT136 25 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 118 EVT137 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 119 EVT138 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 119 EVT139 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 119 EVT140 25 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 119 EVT141 Group 107 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT067 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT004 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT005 25 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT006 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 121 EVT064 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 121 EVT001 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 121 EVT002 Product selectors and further information can be found at: www.ifm.com 606 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] 250 AC 300 DC -25...100 Protection LEDs Drawing no. Order no. IP 67 / IP 68 / IP 69K – 121 EVT003 Group 107 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 25 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 Group 108 · Socket M12, 4-pole · Wiring diagram no. 5 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade 240 AC/DC st. steel -25...85 IP 67 – 122 E11862 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade 240 AC/DC st. steel -25...90 IP 67 – 123 E11861 Group 109 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 9 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 124 EVT069 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 124 EVT007 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 124 EVT008 25 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 124 EVT009 PBT / high-grade 10...30 DC st. steel -25...85 IP 67 / IP 69K green / yellow 125 E11863 Group 110 · Socket M12, 5/4-pole, LED, PNP · Wiring diagram no. 49 wirable ...0.75 mm2 (Ø 4...6 mm) Group 111 · Plug M12, 4-pole · Wiring diagram no. 26 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade 240 AC/DC st. steel -25...85 IP 67 – 126 E11858 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade 250 AC/DC st. steel -25...85 IP 67 – 127 E11857 -25...100 IP 67 / IP 68 / IP 69K – 128 EVT071 Group 112 · Plug M12, 4-pole, 4-wire · Wiring diagram no. 27 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC You can find wiring diagrams and scale drawings from page 623 607 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 112 · Plug M12, 4-pole, 4-wire · Wiring diagram no. 27 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 128 EVT072 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 128 EVT073 Group 113 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 11 5 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT013 10 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT014 25 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 120 EVT015 5 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 121 EVT010 10 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 121 EVT011 25 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 121 EVT012 PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 129 EVT074 Group 114 · Plug M12, 5-pole, 5-wire · Wiring diagram no. 29 2 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm Group 115 · Socket M12, 5-pole · Wiring diagram no. 10 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade st. steel 60 AC/DC -25...85 IP 67 – 130 E11865 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade st. steel 60 AC/DC -25...90 IP 67 – 131 E11864 PA / high-grade st. steel 60 AC/DC -25...85 IP 67 – 132 E11860 Group 116 · Plug M12, 5-pole · Wiring diagram no. 30 wirable ...0.75 mm2 (Ø 4...6 mm) Product selectors and further information can be found at: www.ifm.com 608 Connection technology Type Cable Wire specification Material housing/ nut U Ta Protection LEDs Drawing no. Order no. [V] [°C] -25...85 IP 67 – 133 E11859 U Ta Protection LEDs Order no. [V] [°C] Drawing no. Group 116 · Plug M12, 5-pole · Wiring diagram no. 30 wirable ...0.75 mm2 (Ø 4...6 mm) PA / high-grade 125 AC/DC st. steel Jumpers for hygienic and wet areas Type Cable Wire specification Material housing/ nut Group 117 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 134 EVT142 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 134 EVT143 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 134 EVT144 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 134 EVT145 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 134 EVT146 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 134 EVT147 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 135 EVT148 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 135 EVT149 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 135 EVT150 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 135 EVT151 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 135 EVT152 You can find wiring diagrams and scale drawings from page 623 609 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. – 135 EVT153 Group 117 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K Group 118 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 136 EVT154 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 136 EVT155 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 136 EVT156 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 136 EVT157 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 136 EVT158 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 136 EVT159 Group 119 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 137 EVT160 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 137 EVT161 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 137 EVT162 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 137 EVT163 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 137 EVT164 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 137 EVT165 Product selectors and further information can be found at: www.ifm.com 610 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 119 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 138 EVT166 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 138 EVT167 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 138 EVT168 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 138 EVT169 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 138 EVT170 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 138 EVT171 Group 120 · Jumper , plug: M8, 3-pole, socket: M8, 3-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 139 EVT172 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 139 EVT173 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 139 EVT174 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 139 EVT175 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 139 EVT176 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...80 IP 67 / IP 68 / IP 69K green / yellow 139 EVT177 IP 67 / IP 68 / IP 69K – 140 EVT279 Group 121 · Jumper , plug: M8, 3-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 You can find wiring diagrams and scale drawings from page 623 611 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 121 · Jumper , plug: M8, 3-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 31 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 140 EVT280 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 140 EVT281 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 141 EVT283 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 141 EVT284 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 141 EVT285 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 141 EVT286 Group 122 · Jumper , plug: M8, 3-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 142 EVT260 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 142 EVT261 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 142 EVT262 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 142 EVT263 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 143 EVT265 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 143 EVT266 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 143 EVT267 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 143 EVT268 Product selectors and further information can be found at: www.ifm.com 612 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. IP 67 / IP 68 / IP 69K – 143 EVT269 Group 122 · Jumper , plug: M8, 3-pole, socket: M12, 5-pole, 3-wire · Wiring diagram no. 31 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 Group 123 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 4-wire · Wiring diagram no. 33 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 144 EVT178 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 144 EVT179 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 144 EVT180 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 144 EVT181 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 144 EVT182 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 144 EVT183 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 145 EVT184 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 145 EVT185 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 145 EVT186 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 145 EVT187 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 145 EVT188 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 145 EVT189 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 146 EVT190 You can find wiring diagrams and scale drawings from page 623 613 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 123 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 4-wire · Wiring diagram no. 33 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 146 EVT191 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 146 EVT192 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 146 EVT193 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 146 EVT194 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 146 EVT195 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 147 EVT196 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 147 EVT197 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 147 EVT198 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 147 EVT199 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 147 EVT200 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 147 EVT201 Product selectors and further information can be found at: www.ifm.com 614 Connection technology Jumpers for hygienic and wet areas Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 124 · Jumper , plug: M12, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 148 EVT236 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 148 EVT237 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 148 EVT238 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 148 EVT239 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 148 EVT240 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 149 EVT242 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 149 EVT243 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 149 EVT244 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 149 EVT245 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 149 EVT246 Group 125 · Jumper , plug: M12, 3-pole, socket: M12, 5/4/3-pole, 3-wire · Wiring diagram no. 31 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 150 EVT028 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 150 EVT029 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 150 EVT030 You can find wiring diagrams and scale drawings from page 623 615 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 125 · Jumper , plug: M12, 3-pole, socket: M12, 5/4/3-pole, 3-wire · Wiring diagram no. 31 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 150 EVT031 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 150 EVT032 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 150 EVT033 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 151 EVT022 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 151 EVT023 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 151 EVT024 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 151 EVT025 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 151 EVT026 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 151 EVT027 Group 126 · Jumper , plug: M12, 3-pole, socket: M12, 5/4/3-pole, 3-wire, LED · Wiring diagram no. 32 0.3 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / IP 69K green / yellow 152 EVT034 0.6 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / IP 69K green / yellow 152 EVT035 1 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / IP 69K green / yellow 152 EVT036 2 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / IP 69K green / yellow 152 EVT037 5 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / IP 69K green / yellow 152 EVT038 Product selectors and further information can be found at: www.ifm.com 616 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 126 · Jumper , plug: M12, 3-pole, socket: M12, 5/4/3-pole, 3-wire, LED · Wiring diagram no. 32 10 m orange PVC cable 3 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / IP 69K green / yellow 152 EVT039 Group 127 · Jumper , plug: M12, 4-pole, socket: M8, 4-pole, 4-wire · Wiring diagram no. 33 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 153 EVT248 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 153 EVT249 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 153 EVT250 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 153 EVT251 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 154 EVT253 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 154 EVT254 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 154 EVT255 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 154 EVT256 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 50 AC 60 DC -25...80 IP 67 / IP 68 / IP 69K – 154 EVT257 Group 128 · Jumper , plug: M12, 4-pole, socket: M12, 5/4-pole, 4-wire · Wiring diagram no. 33 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 155 EVT046 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 155 EVT047 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 155 EVT048 You can find wiring diagrams and scale drawings from page 623 617 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 128 · Jumper , plug: M12, 4-pole, socket: M12, 5/4-pole, 4-wire · Wiring diagram no. 33 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 155 EVT049 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 155 EVT050 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 155 EVT051 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 156 EVT040 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 156 EVT041 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 156 EVT042 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 156 EVT043 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 156 EVT044 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 250 AC 300 DC -25...100 IP 67 / IP 68 / IP 69K – 156 EVT045 Group 129 · Jumper , plug: M12, 4-pole, socket: M12, 5/4-pole, 4-wire, LED · Wiring diagram no. 34 0.3 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 157 EVT052 0.6 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 157 EVT053 1 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 157 EVT054 2 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 157 EVT055 5 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow 157 EVT056 Product selectors and further information can be found at: www.ifm.com 618 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. 157 EVT057 Group 129 · Jumper , plug: M12, 4-pole, socket: M12, 5/4-pole, 4-wire, LED · Wiring diagram no. 34 10 m orange PVC cable 4 x 0.34 mm2, Ø 4.9 mm PVC / stainless steel 316L / 1.4404 10...36 DC -25...100 IP 67 / IP 68 / green / IP 69K 2 x yellow Group 130 · Jumper , plug: M12, 5-pole, socket: M12, 5-pole, 5-wire · Wiring diagram no. 35 0.3 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 158 EVT058 0.6 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 158 EVT059 1 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 158 EVT060 2 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 158 EVT061 5 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 158 EVT062 10 m orange PVC cable 5 x 0.34 mm2, Ø 5.1 mm PVC / stainless steel 316L / 1.4404 30 AC 36 DC -25...100 IP 67 / IP 68 / IP 69K – 158 EVT063 U Ta Protection LEDs Order no. [V] [°C] Drawing no. Connectors for hazardous areas Type Cable Wire specification Material housing/ nut Group 131 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m blue PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC04A 5 m blue PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC05A 10 m blue PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC06A 2 m blue PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 14 ENC01A 5 m blue PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 14 ENC02A You can find wiring diagrams and scale drawings from page 623 619 Connection technology Type Cable Wire specification Material housing/ nut U Ta Protection LEDs Drawing no. Order no. [V] [°C] ...30 DC -25...90 IP 67 – 14 ENC03A Group 131 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 10 m blue PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / brass Group 132 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 159 EVC04A 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 159 EVC05A 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 159 EVC06A Group 133 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 11 2 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC10A 5 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC11A 10 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC12A 25 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC13A 50 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 13 ENC14A 2 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 14 ENC07A 5 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 14 ENC08A 10 m blue PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / brass ...30 DC -25...90 IP 67 – 14 ENC09A Product selectors and further information can be found at: www.ifm.com 620 Connection technology Jumpers for hazardous areas Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 134 · Jumper , plug: M12, 4-pole, socket: M12, 5/4-pole, 4-wire · Wiring diagram no. 33 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 160 EVC07A 0.3 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 160 EVC09A 0.6 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 160 EVC10A 1 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 160 EVC11A 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 160 EVC12A 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 60 AC 60 DC -20...60 IP 67 – 160 EVC13A U Ta Protection LEDs Order no. [V] [°C] Drawing no. Connectors for robust applications Type Cable Wire specification Material housing/ nut Group 135 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM004 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM005 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM006 25 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM012 50 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM010 You can find wiring diagrams and scale drawings from page 623 621 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 135 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 161 EVM001 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 161 EVM002 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 250 AC 300 DC -40...90 IP 67 / IP 68 / IP 69K – 161 EVM003 Group 136 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 9 2 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 10...36 DC -40...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 162 EVM007 5 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 10...36 DC -40...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 162 EVM008 10 m black PUR cable 4 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 10...36 DC -40...90 IP 67 / IP 68 / green / IP 69K 2 x yellow 162 EVM009 Group 137 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 11 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM039 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM040 10 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM041 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 161 EVM036 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 161 EVM037 10 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 161 EVM038 2 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM039 Product selectors and further information can be found at: www.ifm.com 622 Connection technology Type Cable Wire specification Material housing/ nut U Ta [V] [°C] Protection LEDs Drawing no. Order no. Group 137 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 11 5 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM040 10 m black PUR cable 5 x 0.34 mm2, Ø 4.9 mm TPU / stainless steel 316L / 1.4404 30 AC 36 DC -40...90 IP 67 / IP 68 / IP 69K – 159 EVM041 Wiring diagrams Core colours 4 9 14 BK black 1 BN brown BN L+ 1 BN 2 WH BU blue 2 WH 4 WH white 3 BU YE 4 BK YE out 1 BN BK out 2 WH 3 BU GN 4 BK 5 GY 6 PK GN/YE green/yellow GY grey GN green YE yellow PK pink screen screen 2 OG orange 3 VT lilac 4 RD red 2 BN RD/BK red/black 3 GN 5 10 1 WH 4 5 6 3 BU 4 BK 11 1 WH 4 BK 7 1 BN L+ BK out 4 1 GN/YE 2 BK 3 BU GN BU L 8 GY BN 6 PK WH 7 BU 3 BU 8 RD 4 BK 5 GY 16 1 WH 2 GN 3 YE 4 GY 5 BN 7 BU A BN C WH/GN E GY/PK J GN L BU N GN/BN O RD/BU P WH S GY T YE L+ 2 out 1 4 out 2 BN 3 GN YE GN 1 3 YE 5 2 13 1 4 1 12 2 4 OG 15 3 BN 3 VT 8 2 1 3 7 1 1 3 L 1 RD/WH red/white YE BU 3 L WH 4 YE 5 GY 6 PK 7 BU 8 screen 623 Connection technology Wiring diagrams 17 23 A BN C GY/PK E BK 30 PK 2 J GN 3 L BU N RD/BU VT P WH R RD S GY T YE 5 3 3 4 4 4 3 YE 5 4 GY 6 5 GY/PK 6 RD/BU 7 WH/GN 8 BN/GN 9 BU 32 1 1 4 4 out GN 3 4 (3) GY 4 (4) BN 1 (1...6) BU 3 (1...6) GN/YE 5 (1...6) 33 1 2 3 RD/WH 3 3 4 4 26 40 1 2 3 34 4 BN BU 1 1 L+ 2 2 out 4 out 4 27 GN 1 BN 2 WH 3 BU 4 BK YE 3 3 BN 1 1 2 GN/YE 2 2 3 BU 3 3 4 4 5 5 28 1 BN 2 BK 3 BU 1 BN 2 WH 3 BU 4 BK 5 GN/YE 36 4 1 YE 29 3 1 BN 2 WH 3 BU 4 BK 5 GY WH 4 (1) GN 4 (2) YE 4 (3) GY 4 (4) PK 4 (5) RD 4 (6) BN 1 (1...8) BU 3 (1...8) GN/YE 5 (1...8) L 41 35 5 Product selectors and further information can be found at: www.ifm.com 624 YE 1 22 5 (1...4) 4 (2) 2 21 3 (1...4) GN/YE YE 1 WH 1 (1...4) BU 3 GN 5 BN 4 (1) RD/BK BK 4 (2) GN 2 4 4 (1) WH 1 L 1 2 3 (1...2) BK WH 4 1 1 (1...2) BU L+ YE 3 20 BN 39 25 19 2 38 2 GN BN 3 5 1 2 YE/GN 4 1 3 12 3 1 WH 1 YE 31 1 11 4 2 24 18 10 1 1 G O 37 2 WH 4 (1) GN 4 (2) YE 4 (3) GY 4 (4) PK 4 (5) RD 4 (6) BK 4 (7) VT 4 (8) Connection technology Wiring diagrams 42 44 11 9 46 1 (1...4) 1 3 (1...4) 4 (1) 4 (2) 3 4 (3) 4 9 3 (1...8) 12 5 (1...4) 2 1 (1...8) - 4 (1) 2 4 (2) 4 5 4 (4) 43 5 (1...8) 1 3 4 (3) 4 (4) 4 (5) 1 (1...6) 9 3 (1...6) 19 6 3 (1...4) 12 5 (1...4) 15 4 (1) 7 2 (1) 5 4 (2) 4 2 (2) 16 4 (3) 2 (3) 6 4 (6) 7 4 (7) 3 4 (4) 8 4 (8) 14 2 (4) 47 10 12 1 (1...4) 8 45 11 48 + 10 10 12 11 5 (1...6) BN 1 (1...4) BU 3 (1...4) GN/YE 5 (1...4) GY/PK 2 (1) 1 (1...8) 6 3 (1...8) 12 5 (1...8) 15 4 (1) 7 2 (1) 5 4 (2) 4 2 (2) 16 4 (3) 8 2 (3) 3 4 (4) 14 2 (4) 17 4 (5) 9 2 (5) 2 4 (6) 13 2 (6) 11 4 (7) 10 2 (7) 1 4 (8) 18 2 (8) 49 19 1 (1...6) 6 3 (1...6) 12 5 (1...6) 2 15 4 (1) 4 7 2 (1) 5 4 (2) RD/BU 2 (2) 4 2 (2) WH/GN 2 (3) 16 4 (3) BN/GN 2 (4) 8 2 (3) 3 4 (4) 14 2 (4) 17 4 (5) 1 4 (1) 2 4 (2) 3 4 (3) 4 4 (4) WH 4 (1) 5 4 (5) GN 4 (2) 4 (6) YE 4 (3) 9 6 GY 4 (4) 50 19 BN L+ 1 WH BK YE GN BU 3 L 2 (5) 2 4 (6) 13 2 (6) 51 1 VT 2 RD 3 GY 4 RD/BU 5 GN 6 BU 7 GY/PK 8 + BN 1 (1...8) GN - 3 (1...8) BU YE WH/GN 9 WH/YE 10 WH/GY 11 BK 12 GN/YE 13 YE/BN 14 BN/GN 15 WH 16 YE 17 PK 18 GY/BN 19 BN WH 4 (1) GN 4 (2) YE 4 (3) GY 4 (4) PK 4 (5) RD 4 (6) BK 4 (7) VT 4 (8) 52 + 1 (1...4) 5 GN - 3 (1...4) 7 YE 1 4 (1) 2 4 (2) 3 4 (3) 4 4 (4) 625 Connection technology Wiring diagrams 53 56 + BN 1 (1...8) GN + 1 (1...8) BN GN - BU 3 (1...8) YE - WH 4 (1) GY/PK 2 (1) GN 4 (2) BU 3 (1...8) GN/YE 5 (1...8) YE WH 4 (1) GN 4 (2) YE 4 (3) RD/BU 2 (2) YE 4 (3) GY 4 (4) WH/GN 2 (3) PK 4 (5) GY 4 (4) RD 4 (6) BN/GN 2 (4) BK 4 (7) VT 4 (8) PK 4 (5) WH/YE 2 (5) RD 4 (6) YE/BN 2 (6) BK 4 (7) WH/GY 2 (7) VT 4 (8) GY/BN 2 (8) 57 + 1 (1...4) 11 GN - 9 10 3 (1...4) 12 5 (1...4) 54 YE A + 1 (1...4) GN L - 1 4 (1) 2 4 (2) 3 4 (3) 4 4 (4) 3 (1...4) YE 58 P 4 (1) E 2 (1) J 4 (2) O 2 (2) T 4 (3) C 2 (3) S 4 (4) N 2 (4) 55 + BN 1 (1...6) GN - BU 3 (1...6) GN/YE 5 (1...6) YE WH 4 (1) GN 4 (2) YE 4 (3) GY 4 (4) PK 4 (5) RD 4 (6) Product selectors and further information can be found at: www.ifm.com 626 + 1 (1...6) 11 GN - 9 10 3 (1...6) 12 5 (1...6) YE 1 4 (1) 2 4 (2) 3 4 (3) 4 4 (4) 5 4 (5) 6 4 (6) Connection technology Wiring diagrams 59 62 1 (1...8) 11 + GN + - 1 (1...8) BN 9 - GN 10 3 (1...8) 12 5 (1...8) - BU 3 (1...8) GN/YE YE 5 (1...8) YE 1 4 (1) 2 4 (2) WH 4 (1) 3 4 (3) GY/PK 2 (1) 4 4 (4) GN 4 (2) 5 4 (5) RD/BU 2 (2) 6 4 (6) YE 4 (3) WH/GN 2 (3) GY 4 (4) BN/GN 2 (4) PK 4 (5) WH/YE 2 (5) RD 4 (6) YE/BN 2 (6) 7 4 (7) 8 4 (8) 60 + 1 (1...4) BN GN - GN/YE 5 (1...4) BU 3 (1...4) 63 YE WH 4 (1) BN 1 (1...8) GY/PK 2 (1) BU 3 (1...8) GN/YE 5 (1...8) GY/PK 2 (1) RD/BU 2 (2) GN 4 (2) RD/BU 2 (2) YE 4 (3) WH/GN 2 (3) WH/GN 2 (3) BN/GN 2 (4) WH/YE 2 (5) YE/BN 2 (6) WH/GY 2 (7) GY 4 (4) BN/GN 2 (4) 61 GY/BN 2 (8) WH 4 (1) GN 4 (2) YE 4 (3) GY 4 (4) PK 4 (5) BN 1 (1...6) RD 4 (6) BU 3 (1...6) BK 4 (7) GN/YE 5 (1...6) VT 4 (8) GY/PK 2 (1) RD/BU 2 (2) WH/GN 2 (3) BN/GN 2 (4) WH/YE 2 (5) YE/BN 2 (6) WH 4 (1) GN 4 (2) YE 4 (3) GY 4 (4) PK 4 (5) RD 4 (6) 627 Connection technology Wiring diagrams 64 66 + 1 (1...8) BN GN - BU + 3 (1...8) GN/YE 19 5 (1...8) YE - WH 4 (1) GY/PK 2 (1) 1 (1...6) GN 6 3 (1...6) 12 5 (1...6) YE GN 4 (2) 15 4 (1) RD/BU 2 (2) 7 2 (1) YE 4 (3) 5 4 (2) WH/GN 2 (3) 4 2 (2) GY 4 (4) 16 4 (3) BN/GN 2 (4) 8 2 (3) PK 4 (5) 3 4 (4) WH/YE 2 (5) 14 2 (4) RD 4 (6) 17 4 (5) YE/BN 2 (6) 9 2 (5) BK 4 (7) 2 4 (6) WH/GY 2 (7) 13 2 (6) VT 4 (8) GY/BN 2 (8) 65 67 + 19 1 (1...4) + 19 1 (1...8) GN GN - 6 3 (1...4) 12 - 6 3 (1...8) 12 5 (1...8) 5 (1...4) YE YE 15 4 (1) 7 2 (1) 5 4 (2) 4 2 (2) 16 4 (3) 8 2 (3) 3 4 (4) 14 2 (4) 15 4 (1) 7 2 (1) 5 4 (2) 4 2 (2) 16 4 (3) 8 2 (3) 3 4 (4) 14 2 (4) 17 4 (5) 9 2 (5) 2 4 (6) 13 2 (6) 11 4 (7) 10 2 (7) 1 4 (8) 18 2 (8) Product selectors and further information can be found at: www.ifm.com 628 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 7 1 10 15,5 31 14 4 M8x1 3 9 1 4 1 45 M12x1 2 8 15 10 27 19 4 2 3 39 25,5 M8x1 9 3 1 1 M12 x1 10,5 3 9 10 19 15 43 M8x1 LED 2 3 10,5 25,5 4 9 3 1 1 M12 x1 4 10 20 M8x1 4 3 35 2 18 31 1 2 4 3 1 2 4 3 1 2 4 3 30 10 1 9 M12 x1 5 11 M8x1 46 18 19 25,5 10 4 3 9 2 1 M12 x1 6 12 15,5 35 18 18 26,5 36,5 M12x1 30 1 14 4 M12 x1 2 LED 629 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 19 13 15,5 26,5 36,5 15 M12x1 1 2 4 3 8 1 7 6 5 14 43 M12 x1 14 2 5 3 4 20 15 15,5 28 14 2 4 3 M12 x1 45 M12x1 8 1 7 6 38 1 5 2 5 3 4 10,5 15 21 15,5 26,5 36,5 15 M12x1 1 2 4 3 43 8 1 7 6 5 14 3 LED M12 x1 16 2 5 3 4 22 20 20 45 35 2 4 3 M N C O P 47 30 18 A 1 5 M16 x 1 L E G A L U T J S R M12 x1 17 23 45 20 46 20 1 2 4 3 49 5 M N C O P M12 x1 M16 x1 18 G 24 25 M12x1 43,9 8 1 7 6 43 21 13 2 5 36 Ø14,5 3 4 M18 x1 Product selectors and further information can be found at: www.ifm.com 630 E 21 1 4 2 3 U T J S R Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 31 25 26 56 25 1 4 2 3 M18 x1 85 18 19 1 12 11 10 13 2 17 9 3 14 4 8 16 5 6 7 15 M 23 x1 26 32 26 51 14,5 M 23 x1 4 11 5 26 2 12 7 6 38,5 70 10 2 3 1 9 8 3 1 M12x1 27 33 27 15 26 85 M 23 x1 4 11 5 2 12 7 6 3 39 10 2 3 1 9 8 1 G1 2 10,5 28 34 49 26 10 2 3 4 20 M 23 x1 1 9 8 11 14,5 42,5 12 7 6 2 5 1 1/2" 20UNF 29 3 35 26 24 10 2 3 1 9 8 4 M 23 x1 11 15 42 12 7 6 2 3 10,5 58 51 5 1 G1 2 20 30 36 26 51 M 23 x1 27 5 39 70 15 18 19 1 12 11 10 13 2 17 9 3 14 4 8 16 5 6 7 15 4 "-20UNF 12 1 3 2 10,5 631 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 43 37 15 15,5 43 10,5 5 14 1 4 2 3 M12 x1 1 3 4 49,5 M12x1 38 2 44 20 42 Ø26 31 18 2 3 1 2 1 3 4 49,9 G7 8 15 M12 x1 39 45 28 29 18 2 20 42 3 1 52 2 1 3 4 2 1 3 4 2 1 3 4 2 1 3 4 2 M12 x1 22 M3 40 46 15,5 30,5 71 1 2 3 6 36,5 29 5 4 5 M12x1 14 Rd 24 41 47 29 59 38,5 26 15,5 1 2 3 14 6 5 5 4 49,5 M12x1 Rd 24 20 42 48 15,5 20 M12x1 14 1 3 4 M12 x1 Product selectors and further information can be found at: www.ifm.com 632 42 18 2 31 36,5 30,5 5 15 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 55 49 20 52 3 4 M8x1 4 10 1 3 2 1 4 36 M12 x1 50 9 M8x1 9 10 1 01 2 5 L 4 3 2 4 3 2 4 3 2 1 31 56 3 1 9 10 36 L M8x1 3 19 19 9 01 01 10 M8x1 4 10 M8x1 4 3 9 1 36 L 25,5 57 2 1 10 10 4 36 L 3 31 M8x1 4 3 1 36 L 1 31 58 9 M8x1 9 4 1 10 10 3 36 L 3 31 3 1 14 4 9 10 49,5 53 4 19 M8x1 4 01 2 1 M12x1 52 9 M8x1 9 01 01 3 1 9 M8x1 9 10 M8x1 4 10 51 M8x1 10 25,5 1 9 L M8x1 3 1 25,5 59 M8x1 3 9 9 10 36 L M8x1 3 3 1 14 4 25,5 9 3 1 31 L 49,5 54 4 10 1 M12x1 4 19 4 01 10 M8x1 2 1 60 M8x1 1 9 3 9 10 36 L 25,5 M8x1 1 2 1 3 4 4 19 4 3 M12x1 19 10 LED 01 4 14 9 10 49,5 L M8x1 3 1 25,5 633 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 67 61 4 9 10 49,5 L 10 4 3 2 LED 26,5 19 14 4 01 3 M12x1 M8x1 1 1 1 M8x1 14 3 36 25,5 15,5 L 1 2 4 3 1 2 4 3 1 2 4 3 1 2 4 3 1 2 4 3 1 2 4 3 5 9 M12x1 36,5 62 68 M8x1 4 1 4 26,5 2 1 2 10 10 14 4 3 01 3 M12x1 M8x1 1 3 14 36 15,5 L 31 L 49,5 5 9 9 M12x1 36,5 63 69 3 4 9 10 49,5 L 2 1 2 1 4 10 19 14 4 3 3 M12x1 M8x1 M12x1 1 01 2 14 9 M8x1 36 25,5 64 L 45 70 M8x1 LED 3 4 1 4 26,5 2 1 2 10 10 14 4 3 01 1 M12x1 M8x1 2 3 14 36 15,5 L 31 L 49,5 5 9 9 M12x1 36,5 71 1 1 2 9 14 3 1 36 L 4 15,5 3 3 14 15,5 M12x1 26,5 4 01 10 M8x1 49,5 4 26,5 65 L 5 14 M12x1 15,5 36,5 M12x1 36,5 72 3 14 9 36 L M12x1 1 4 3 3 4 45 Product selectors and further information can be found at: www.ifm.com 634 14 14 M12x1 1 2 5 15,5 10 01 1 M12x1 M8x1 4 15,5 66 49,5 L 45 5 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 79 73 3 49,5 4 L 2 1 5 4 14 15,5 2 3 3 26,5 1 26,5 15,5 1 LED LED 14 30,5 M12x1 4 M12x1 14 14 36,5 L 4 3 1 2 4 3 1 2 4 3 1 2 4 3 80 3 49,5 4 1 26,5 1 15,5 2 M12x1 14 L 2 1 14 5 5 4 14 15,5 2 15,5 M12x1 3 49,5 3 26,5 74 2 15,5 M12x1 36,5 M12x1 15,5 36,5 1 5 L 4 5 14 15,5 M12x1 36,5 M12x1 36,5 75 81 M12x1 49,5 L 2 2 4 3 3 4 49,5 45 76 M12x1 14 1 5 5 15,5 15,5 4 14 M12x1 1 15,5 3 14 1 15,5 14 M12x1 2 L 5 45 82 3 49,5 4 L 1 2 1 5 4 14 15,5 2 5 3 3 15,5 26,5 1 M12x1 14 15,5 2 LED 14 30,5 M12x1 L 4 M12x1 5 45 14 M12x1 15,5 36,5 36,5 83 3 1 30,5 2 L 4 1 2 4 3 29,5 M12x1 15,5 14 M12 x1 77 47 L 17,5 29,5 5 45 14 LED 5 3 2 1 4 28,5 M12x1 15,5 36,5 M3 78 14 14 M12x1 15,5 36,5 L 15,5 M12x1 36,5 2 4 3 24 1 5 47 L 17,5 31,5 1 2 LED 5 3 4 28,5 4 M12 x1 1 3 30,5 2 26,5 84 M3 635 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 89 27 21 18 8,5 24 M12 x1 85 17,5 L 31,5 5 1 26 4,5 47 2 LED 79 2,6 12,5 4 79 5 1 8 7 6 88 2 3 4 4 28,5 3 4,5 5 M12 x1 4,5 M3 3 1 4 3 2 4 3 2 LED 4,5 4,5 47 L 20 12 LED 5 2 21 18 8,5 1 26 4,5 5 4 4,5 4,5 21,5 3 8,5 90 18 M12 x1 86 4,5 16 M8x1 M 2,5 12,5 129 4,5 L 20 12 LED 5 2 LED 11,5 47 1 4 21,5 3 1 18 M12 x1 145 87 129 2,6 M8x1 11,5 4,5 4,5 M3 91 88 27 21 18 8,5 21 18 8,5 5 4,5 12,5 2,6 M16 x 0,75 4,5 1 92 53 23,5 10,4 17 16 30,5 42 4,5 6,5 4,5 LED 11,5 4,5 4,5 8,5 4,5 16 3 LED M8x1 4,5 12,5 129 145 129 4 Product selectors and further information can be found at: www.ifm.com 636 1 79 E M N C O P 79 G A 88 2,6 M8x1 L 4,5 4,5 U T J S R 4,5 4,5 26 26 5 1 2 4 3 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 96 93 60 60 6 34 34 5 5 5 4 1 2 PWR 3 4 1 2 1 5 2 5 4,7 4,7 7,5 28,5 39 2 4 3 1 2 4 3 1 2 4 3 7,5 22 18 22 18 28,5 39 1 5 3 4,5 4 M12x1 4,5 M12x1 73 73 125 118,2 5 3 94 97 60 60 8 5 6 3 4 1 2 34 5 7 1 2 1 2 4 3 5 5 M12x1 4,7 4,5 M12x1 73 73 5 152 7,5 4,7 28,5 39 4,5 118,2 5 4 34 5 PWR 3 7,5 22 18 22 18 28,5 39 95 98 60 60 6 3 4 1 2 7 8 5 6 34 5 34 5 5 4 1 2 5 152 1 M12x1 2 5 3 M12x1 7,5 4,5 28,5 39 4,7 4,7 4,5 4 5 73 73 125 5 PWR 3 7,5 22 18 22 18 28,5 39 637 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 102 99 60 60 1 2 3 4 1 2 1 M12x1 2 5 4 3 12 7 6 5 11 4 125 8 9 1 5 5 4 10 2 3 73 10 2 3 34 34 5 11 4 118,2 8 9 1 3 PWR 73 12 7 6 6 5 5 5 M12x1 M23 x 1 2 4 3 1 2 4 3 1 2 4 3 4,7 28,5 39 33 33 18 7,5 4,5 M23 x 1 4,5 7,5 18 4,7 28,5 39 1 5 100 103 60 60 8 5 6 3 4 1 2 34 5 7 34 2 M12x1 1 2 4 3 5 12 7 6 5 11 4 5 8 9 1 152 118,2 5 1 10 2 3 5 73 5 11 4 10 2 3 4 73 12 7 6 8 9 1 5 PWR 3 M12x1 18 33 18 33 7,5 4,5 M23 x 1 28,5 39 4,7 4,7 7,5 4,5 M23 x 1 28,5 39 101 104 60 60 6 3 4 1 2 7 8 5 6 34 5 34 5 5 1 5 4 3 12 7 6 5 11 4 3 4 1 2 5 152 125 M12x1 2 8 9 1 10 2 3 5 73 5 11 4 10 2 3 73 12 7 6 5 PWR 8 9 1 M12x1 18 33 18 33 Product selectors and further information can be found at: www.ifm.com 638 28,5 39 7,5 4,5 M23 x 1 4,7 7,5 4,5 4,7 M23 x 1 28,5 39 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 108 105 60 34 34 5 5 60 A A PWR B B 4 118,2 2 73 1 M12x1 1 2 5 4 3 18 11 12 1 19 10 2 13 9 3 16 8 4 14 7 6 5 15 3 4 1 2 5 A 118,2 B A 73 B 5 3 17 M12x1 1 2 4 3 1 2 4 3 1 2 4 3 5 4,7 4,5 4,7 28,5 39 7,5 22 18 33 18 7,5 4,5 M23 x 1 28,5 39 106 109 60 B B A A 6 5 A 34 34 5 5 60 A A A PWR PWR 3 125 A A B B 2 73 1 B B A A B B 4 M12x1 1 2 4 3 5 18 11 12 1 19 10 2 13 17 9 3 16 8 4 14 7 6 5 15 5 4 118,2 B 1 2 73 B 5 3 M12x1 5 4,7 4,5 4,7 7,5 22 18 33 18 28,5 39 7,5 4,5 M23 x 1 28,5 39 107 110 60 60 A A B B 8 5 6 3 4 1 2 5 B 6 34 5 5 A B 34 7 A A A A B B 2 5 2 73 1 1 M12x1 4 3 18 11 12 1 19 10 2 13 9 3 16 8 4 14 7 6 5 15 125 A 4 17 73 B 5 152 B 5 PWR 3 M12x1 5 4,5 7,5 4,7 4,5 4,7 M23 x 1 28,5 39 33 18 7,5 22 18 28,5 39 639 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 114 111 LED A A B B 6 34 5 5 137,3 60 A A PWR B A A B B 4 M12 x1 2 1 2 4 3 5 1 2 4 3 5 2 72 M12x1 34 125 1 73 18 11 12 1 19 10 2 13 17 9 3 16 8 4 14 7 6 5 15 B 5 3 4,7 36 8,2 33 18 7,5 4,5 M23 x 1 28,5 39 112 18 60 64,9 115 8 5 6 3 4 31 4 9 3 1 5 M8x1 1 1 2 4 3 5 2 73 18 11 12 1 19 10 2 13 17 9 3 16 8 4 14 7 6 5 15 152 10 34 5 7 M12x1 116 4,7 18 7,5 4,5 M23 x 1 28,5 39 19 4 25,5 10 33 M8x1 9 3 1 113 60 B A A B B A A 117 8 6 5 5 A B 10 34 B B 4 4 LED 9 5 152 3 1 A A B B M12x1 4,5 7,5 2 4 3 3 1 4 3 2 118 33 18 4,7 M23 x 1 28,5 39 1 5 2 73 18 11 12 1 19 10 2 13 17 9 3 16 8 4 14 7 6 5 15 19 M8x1 PWR 25,5 7 A 10 31 M8x1 Product selectors and further information can be found at: www.ifm.com 640 9 1 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 125 119 36 2 38 25,5 10 4 3 9 20 19 M8x1 1 1 2 4 3 5 LED 18 M12 x1 13 120 126 40 M12x1 2 4 3 20 1 5 14 2 1 3 4 38 36,5 15,5 26,5 18 M12 x1 13 121 127 60 1 2 4 3 5 45 M12 x1 2 1 3 4 2 1 3 4 2 1 3 4 1 2 4 3 20 15,5 14 M12 x 1 122 13 18 128 36 2 4 3 18 15,5 38 20 14 1 M12 x1 49 M12 x1 13 123 129 30,5 36,5 2 20 1 4 M12 x 1 13 15,5 54 M12x1 3 5 14 18 124 130 36 LED 14 20 1 2 38 36,5 M12x1 15,5 26,5 5 4 3 5 18 M12 x1 13 641 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 137 131 4 2 20 5 9 4 M12 x 1 13 3 3 1 4 25 1 10 54 M8x1 9 10 18 L M8x1 3 31 1 25,5 132 138 4 1 5 18 3 M12 x1 4 9 9 3 1 4 19 38 2 25 20 40 10 M8x1 10 3 M8x1 1 25,5 L 25,5 13 133 139 LED 60 5 3 M12 x 1 13 4 3 1 9 9 10 M8x1 18 4 19 4 1 25 20 2 10 3 1 4 3 2 4 3 2 1 2 4 3 M8x1 25,5 L 25,5 140 9 M8x1 3 1 4 M8x1 4 10 10 9 36 L 3 31 9 M8x1 9 10 M8x1 4 1 135 10 134 3 1 36 L 1 31 141 M8x1 M8x1 10 19 3 1 4 9 36 9 L 10 M8x1 3 1 19 4 10 4 3 1 9 25,5 9 36 136 L 10 1 M8x1 25,5 142 LED 1 M8x1 3 9 36 9 L 10 M8x1 14 10 3 1 1 3 25,5 Product selectors and further information can be found at: www.ifm.com 642 9 4 19 10 4 M12 x1 15,5 M8x1 4 36 L 45 5 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 149 143 M8x1 1 14 14 15,5 36,5 L 36 4 3 1 3 4 4 M12 x1 19 2 5 9 3 1 15,5 26,5 10 4 49 144 L 1 M8x1 150 M12 x1 36 L 4 3 1 2 14 1 3 31 1 26,5 10 3 9 M8x1 9 15,5 M8x1 4 10 2 1 3 9 10 25,5 17 M12x1 4 4 3 14 145 15,5 36,5 L 49 M12x1 151 M8x1 9 9 36 10 1 3 M8x1 4 1 L 49 3 152 M8x1 10 9 L M8x1 LED 14 26,5 9 1 2 1 3 31 1 4 3 4 3 2 10 3 4 3 4 3 2 19 25 4 15,5 10 M12 x1 4 14 15,5 36,5 25,5 L 49 147 M12x1 153 3 19 9 9 M8x1 4 3 10 10 2 2 1 3 4 1 M8x1 49,5 25,5 L 14 9 15,5 M12x1 4 25 2 1 4 45 25,5 L 146 2 1 M12 x1 1 2 15,5 3 15,5 4 3 19 10 4 14 14 M12 x1 2 1 M8x1 1 31 L 25,5 148 154 4 9 M8x1 4 10 15,5 3 14 49,5 L 31 3 1 2 1 3 4 15,5 14 M12x1 1 M12 x1 17 49 L 9 10 25,5 1 M8x1 643 Connection technology Scale drawings / drawing no. – CAD download: www.ifm.com 159 1 4 4 26,5 M12x1 L 15,5 36,5 3 14 M12 x1 1 15,5 15,5 4 L 4 2 3 3 1 4 45 M12x1 15,5 L 15,5 36,5 15,5 1 26,5 15,5 1 4 3 1 2 4 3 1 2 4 3 M12x1 5 4 4 L 15,5 36,5 14 2 3 14 45 M12x1 M12x1 158 162 15,5 14 14 1 4 15,5 15,5 5 49 L 26,5 M12 x1 1 2 5 4 3 45 Product selectors and further information can be found at: www.ifm.com M12x1 36,5 M12 x1 644 2 LED 14 49 3 1 161 M12 x1 2 3 14 14 36,5 157 3 2 31 14 1 49 2 4 160 M12 x1 3 14 M12x1 156 2 2 5 14 49 1 2 36,5 3 1 26,5 2 15,5 14 15,5 M12 x1 26,5 155 5 3 LED 14 Connection technology 645 ifm – worldwide addresses Argentina Brazil Columbia Estonia India ifm electronic s.r.l. Manuela Sáenz 323 5º piso, oficina 3 C1107BPA - Puerto Madero Buenos Aires, Argentina Tel. (011) 5353-3436 Fax (011) 5353-3436 Interior 0810-345-3436 info.ar@ifm.com www.ifm.com/ar ifm electronic Ltda. Rua Eleonora Cintra, 140 Jardim Analia Franco 03337-000 Sāo Paulo/SP Tel. +55-11-2672-1730 Fax +55-11-2673-3501 info.br@ifm.com www.ifm.com/br SENSOMATIC Y CIA LTDA. CALLE 1 C 25a - 50 BOGOTA D.C. COLOMBIA Tel. +57 313 430 2264 Tel. +57 1 407 96 96 info@sensomatic-ltda.com www.sensomatic-ltda.com Pesmel Estonia LTD Segu 4 76505 Saue Estonia Tel.: +372 674 73 30 Fax: +372 674 73 31 pesmel@pesmel.ee www.pesmel.ee ifm electronic India Pvt. Ltd. Plot No. P-39/1 MIDC Gokul Shirgaon Kolhapur – 416234 Maharashtra State, India Tel. +91 / 231 / 267 27 70 Fax +91 / 231 / 267 23 88 info@ifm-electronic.in www.ifm.com/in Australia ifm efector pty ltd. PO Box 479 Suite 3, 745 Springvale Road Mulgrave VIC 3170 Tel. 1300 365 088 Fax 1300 365 070 sales.au@ifm.com www.ifmefector.com.au Austria ifm electronic gmbh Wienerbergstraße 41 Gebäude E 1120 Vienna Tel. +43 / 1 / 617 45 00 Fax +43 / 1 / 617 45 00 10 info.at@ifm.com www.ifm.com/at Bangladesh Sensotec Automation Red Crescent Chamber 87, Motijheel Commercial Area Dhaka 1000 Bangladesh Tel. +880 171 546 890 sensotec@agni.com Costa Rica Bulgaria ifm electronic eood 1202 Sofia ul. Klokotnica No 2A Business Centre IVEL fl.4, office 17 Tel. +359 2 807 59 69 Fax +359 2 807 59 60 info.bg@ifm.com Canada ifm efector Canada Inc. 700 Dorval Drive / Corporate Centre Oakville; L6K3V3 Ontario Tel. +1-800-441-8246 Fax +1-800-329-0436 info@ifmefector.ca www.ifmefector.ca DEPOSIT INVEST Joint-Stock Company Block 2, 27 Zheleznodorovhnaya street 220089 Minsk Republic of Belarus Tel. +375-17-270 75 06 Fax +375-17-270 75 07 george_ozerov@list.ru Belgium and Luxembourg ifm electronic n.v./s.a. Zuiderlaan 91 1731 Zellik Tel. +32 2 481 0220 Fax +32 2 463 1795 info.be@ifm.com www.ifm.com/be Bolivia BAVARIA S.R.L. Álvaro Baptista Vargas Zona Morocollo, Urb. Santos Pariamo C. Mario Diaz de medina (26-A), Nr. 32 La Paz - Bolivia Tel.: 00-591-2-277 13 78 Mobile: 00-591-720-47 442 alvarobaptista@bavaria.bo www.bavaria.bo Finland ifm electronic oy Vaakatie 5 00440 Helsinki Tel. +358 / 9 / 751 777 00 Fax +358 / 9 / 751 777 10 info.fi@ifm.com www.ifm.com/fi Indonesia Croatia France Ireland ifm electronic gmbh Wienerbergstr. 41 Gebäude E A-1120 Wien Tel. +43 / 1 / 617 45 00 Fax +43 / 1 / 617 45 00 10 info.hr@ifm.com www.ifm.com/hr ifm electronic Siège : Savoie Technolac BP226 73374 Le Bourget du Lac Agence commerciale : Immeuble Uranus 1-3 rue Jean Richepin 93192 NOISY LE GRAND CEDEX Tél: 0820 22 30 01 Fax: 0820 22 22 04 info.fr@ifm.com www.ifm.com/fr ifm electronic (Ireland) Ltd. No. 7, The Courtyard Kilcarbery Business Park New Nangor Road Clondalkin Dublin 22 Tel. +353 / 1 / 413 60 66 Fax +353 / 1 / 457 38 28 sales_ie@ifm.com www.ifm.com/ie Czech Republic Chile Electronica Industrial Schädler y Cia. Ltda. Av. Antonio Varas 1871 Providencia 6641545 Santiago Tel. +56 / 2 / 274 74 30 Fax +56 / 2 / 204 93 38 info@schadler.com www.schadler.com China Belarus Gen Bus S.A Santa Rosa, Sto. Domingo, Heredia. Bodegas Del Sol, Bodega No. 22 COSTA RICA Tel. + (506) 25 60 39 58 Tel. + (506) 22 62 39 27 Fax: + (506) 22 62 16 74 ifm electronic (Shanghai) Co., Ltd Building 15, No.1000 Zhangheng Road, Pu Dong District, 201203 Shanghai, P. R. China Tel. +86 21 3813 4800 Tel. +86 400 880 6651 Fax +86 21 5027 8669 info.cn@ifm.com www.ifm.com/cn ifm electronic (HK) Ltd Unit 2106, 21/F, Tower 2, Metroplaza No. 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong. Tel. +852 3528-0462 Fax +852 3697-0222 info.hk@ifm.com www.ifm.com/hk ifm electronic (Taiwan) Limited 2C, Bao-Cheng Enterprise Tower, No. 6 Mincyuan Second Road, Cianjhen District, Kaohsiung City, Postal Code 806, Taiwan, R.O.C. Tel. +886-7-335-7778 Fax +886-7-335-6878 info.tw@ifm.com www.ifm.com/tw ifm electronic spol.s.r.o. U Křížku 571 252 43 Prague Tel. +420 / 2 / 67 990 211 Fax +420 / 2 / 67 750 180 info.cz@ifm.com www.ifm.com/cz Denmark ifm electronic a/s Ringager 4A, 1.sal tv. 2605 Brøndby Tel. +45 70 20 11 08 Fax +45 70 20 11 09 info.dk@ifm.com www.ifm.com/dk Dominican Republic WECH AUTOCONTROLES S. A. Ave. Romulo Betancourt 2158 Edificio Wech Urb. Renacimiento Santo Domingo Dominican Republic Tel.: + 1 809-531-0550 Fax: + 1 809-531-9175 wech@verizon.net.do www.wechautocontroles. com.do Ecuador INSELEC CIA. LTDA. Av. de los Arupos E1-202 y Pan. Norte- Km 5 ½ Quito Tel. +593 2 28074- 76 - 78 Fax +593 2 2807475 inselec@inselec.com.ec www.inselec.com.ec Egypt Egyptian Establishment for Electromechanical Supplies Mr. Ahmed Gouda 27 Al-Salam Street Al Arezona, Al Haram Road Giza 12111, Cairo Tel. +20 / 2 / 586 49 49 Fax +20 / 2 / 586 49 49 Mobile +20 10 10 61 791 ahmed_gouda97@yahoo.com Germany ifm electronic gmbh Friedrichstr. 1 45128 Essen Tel. +49 201 24 22 0 Fax +49 201 24 22 12 00 info@ifm.com www.ifm.com/de Israel Astragal Ltd. 3, Hashikma Str. Azur 58001 P.O. Box 99 Azur 58190 Tel. +972 / 3 / 5 59 16 60 Fax +972 / 3 / 5 59 23 40 astragal@astragal.co.il www.astragal.co.il Italy Greece ifm electronic monoprosopi E.P.E. 27, Andrea Papandreou Street 15125 Amaroussi Greece Tel. +30 210 61 800 90 Fax +30 210 61 994 00 info.gr@ifm.com www.ifm.com/gr ifm electronic Centro Direzionale Colleoni Palazzo Andromeda 2 Via Paracelo n° 18 20041 Agrate Brianza (Milano) Tel. +39 / 039 68 99 982 Fax +39 / 039 68 99 995 info.it@ifm.com www.ifm.com/it Guatemala Japan Ingenieros Civiles Electromecánicos Asociados, S.A. (IASA) 5 Av. 20-13 Zona 14 Guatemala City GUATEMALA Teléfono: 502 - 23670868 info@iasa.com.gt efector co. ltd. Chiba Higashi Techno Green Park 2-9-20 Okayamadai Togane-shi, Chiba 283-0826 Tel. +81 / 475 50 3003 Fax +81 / 475 50 3013 ifm-j@efector.co.jp www.ifm.com/jp Honduras R y D INDUSTRIAL Bo. Paz Barahona 11 Ave. 14 y 15 Calle S.O. #142 San Pedro Sula Tel. +504 5503703 Fax +504 5501108 ramonmorales@sulanet.net Hungary ifm electronic kft. Szent Imre út 59. I.em. H-9028 Győr Tel. +36-96 / 518-397 Fax +36-96 / 518-398 info.hu@ifm.com www.ifm.com/hu Product selectors and further information can be found at: www.ifm.com 646 PT Indoserako Sejahtera Jl. P. Jayakarta 121 No. 59 10730 Jakarta Pusat Tel. +62 / 21 6 24 8923 Fax +62 / 21 6 24 8922 iso297@dnet.net.id Jordan Al Mashreqan Trading Supplies P.O.Box.851054 11185 Swaifieh Amman - Jordan. Tel. +962 6 581 8841 Fax +962 6 581 8892 info@mashreqan.com ifm – worldwide addresses Korea Netherlands Philippines South Africa Ukraina ifm electronic Ltd. 2F Hyundai Liberty House #201 Hannam-Dong 258, Yongsan-Gu, Seoul, Korea Tel. +82 2-790-5610 Fax +82 2-790-5613 info.kr@ifm.com www.ifm.com/kr ifm electronic b.v. Deventerweg 1 E 3843 GA Harderwijk Tel. +31 / 341 438 438 Fax +31 / 341 438 430 info.nl@ifm.com www.ifm.com/nl Gram Industrial, Inc. Unit 201 Common Goal Tower Finance cor., Industry St., Madrigal Business Park Ayala Alabang Muntinlupa City 1770 Tel. 632-8502218 / 8508496 Fax: 632-8077173 / 8503055 efector@gram.com.ph ifm electronic (pty) Ltd Shorrok House Route 21 Corporate Park Nellmapius Drive, Irene Ext. 30, Centurion 0157, Pretoria Postnet Suite 279 Private bag X8 Elardus Park 0047 Tel. +27 (0) 861 IFM RSA / 436 772 Fax +27(0)12 450 0322 info.za@ifm.com www.ifm.com/za ifm electronic Mariny Raskovoj 11 02660 Kiev Ukraine Tel. +380 44 501 8543 Fax +380 44 501 8543 info.ua@ifm.com www.ifm.com/ua Latvia EC Systems Katlakalna Str. 4A 1073 Riga Latvia Tel.: +371 724 1231 Fax: +371 724 8478 alnis@ecsystems.lv www.ecsystems.lv Lebanon Middle East Development Co. SAL (MEDEVCO) Medevco Building Jeita Main Road Jeita - Kesrouan Lebanon Mail address : P.O.Box 67 Jounieh Lebanon Tel. +961-9-233550 Fax +961-9-233554 info@medevco-lebanon.com Lithuania Elinta UAB Terminalo g. 3, Biruliškių k., Karmėlavos sen. LT-54469 Kauno raj. (Kauno LEZ) Lithuania Tel.: +370 37 351 999 Fax: +370 37 452 780 sales@elinta.lt www.elintosprekyba.lt Malaysia ifm electronic Pte. Ltd Malaysian Branch Office No. 2-4-2, Fourth Floor Tower 2 @ PFCC, Jalan Puteri 1/2 Bandar Puteri Puchong, 47100 Puchong, Selangor Tel. +603 - 8063 9522 Fax +603 - 8063 9524 sales.my@ifm.com ifm electronic Asia Regional Office 21, Jalan Kemunting Taman Kebun The 80250 Johor Bahru Johor, West Malaysia Tel. +607 - 332 5022 Fax +607 - 332 1577 sales.my@ifm.com Mexico ifm efector S. de R.L. de C.V. Anillo Periférico, 1816-1 Col. Hacienda San Jerónimo Monterrey, N.L. Mexico 64630 Tel. +52-81-8040-3535 Fax +52-81-8040-2343 www.ifmefector.mx New Zealand ifm efector pty ltd. Unit B, 20 Cain Road Penrose, Auckland Tel. +64 / 95 79 69 91 Fax +64 / 95 79 92 82 sales.nz@ifm.com www.ifm.com/nz Nigeria Automated Process Ltd 3rd Floor, 32 Lagos Abeokuta Expressway Near Cement Bus Stop Dopemu, Agege Lagos State, Nigeria Tel. + 234 / 01 / 4729 967 Fax + 234 /01 / 4925 865 sales@automated-process.com www.automated-process.com Poland ifm electronic Sp.z o.o. ul. Kosciuszki 175 PL 40-524 Katowice Tel. +48 / 32 / 60 87 454 Fax +48 / 32 / 60 87 455 info.pl@ifm.com www.ifm.com/pl Portugal ifm electronic – Sucursal em Portugal Avenida da Republica 2503 4430-208 Vila Nova de Gaia Tel. +351 / 22 / 37 17 108 Fax +351 / 22 / 37 17 110 info.pt@ifm.com www.ifm.com/pt Norway Siv.Ing. J.F.Knudtzen AS Billingstadsletta 97 1396 Billingstad Postboks 160 1378 Nesbru Tel. +47 / 66 98 33 50 Fax +47 / 66 98 09 55 firmapost@jfknudtzen.no www.jfknudtzen.no Oman Technical Engineering Company LLC. P.O. Box 59 Madinat Al Sultan Qaboos Postal Code 115 Sultanate of Oman Tel. +968 24503593 Fax +968 24503573 tecoman@omantel.net.om Pakistan AB Automation Shop No.2. Rubab Chamber M.A. Jinnah Road Off Sarai Road Karachi Tel. +92 / 21 / 2412 278 Fax +92 / 21 / 2422 277 abauto@cyber.net.pk Panama RyD Industrial Panamá Av. Ricarco J. Alfaro, Plaza Aventura, Piso 4, Oficina 417 Panamá PANAMÁ Tel. (507) 203-2766, Tel. (507) 396-3550 Fax: (507) 396-3551 ventaspn@rydindustrial.com Peru dekatec s.a.c. Los Calderos 188 Urb. Vulcano, Ate Lima / Peru Tel. +511 / 348 0293 Tel. +511 / 348 0458 Tel. +511 / 348 2269 Fax +511 / 349 0110 dkleffmann@dekatec.com.pe www.dekatec.com.pe Romania ifm electronic s.r.l. Str. Cristian Nr. 5 550073 Sibiu Tel.: 0040 269 224550 Fax: 0040 269 224766 info.ro@ifm.com Russia ifm electronic Ibragimova, 31, k.50 office 607 105318 Moscow Tel.: +7 (495) 921-44-14 Fax: +7 (495) 651-82-97 info.ru@ifm.com www.ifm.com/ru Saudi Arabia Noor Al-Shomoe for Electric & Maintenance King Khalid Street, Cross 5 P.O. Box 2571 Al-Khobar 31952 Kingdom of Saudi Arabia Tel. +9 663 864 49 58 Fax +9 663 894 63 41 h.o.info@nooralshomoe.com Singapore ifm electronic Pte. Ltd. 25, Intern. Business Park #03-104 German Center 609 916 Singapore Tel. +65 / 6 / 5 62 86 61 Fax +65 / 6 / 5 62 86 60 sales_sg@ifm.com www.ifm.com/sg Slovakia ifm electronic spol. s.r.o. Rybnicna 40 831 06 Bratislava Tel. +421 / 2 / 44 87 23 29 Fax +421 / 2 / 44 64 60 42 info.sk@ifm.com www.ifm.com/sk Spain ifm electronic s.l. Edificio Prima Muntadas A Parc Mas Blau C/Berguedà 1 08820 El Prat de Llobregat Tel. +34 / 93 / 479 30 80 Fax +34 / 93 / 479 30 86 info.es@ifm.com www.ifm.com/es Sweden ifm electronic ab Drakegatan 6 41250 Gothenburg Tel. +46 31 750 23 00 Fax +46 31 750 23 29 info.se@ifm.com www.ifm.com/se Switzerland ifm electronic ag Altgraben 27 4624 Härkingen Tel. 0800 88 80 33 Fax 0800 88 80 39 info.ch@ifm.com www.ifm.com/ch Syria I.E.C. Industrial Engineering Center P.O. Box 15 Sehnaya, Damascus Syria Tel. + 963 11 532 13 19 Fax. + 963 11 442 12 27 info@iec-automation.com Thailand Sang Chai Meter Co., Ltd. 694/16-19 Phaholyothin Road Samsen Nai, Phayathai Bangkok 10400 Tel. +66 / 2 / 616 8051 Fax +66 / 2 / 616 8050 scmth@ksc.th.com Turkey ifm electronic Elektrikli ve Elektronik Aletler İth.İhr.Paz.Tic.Ltd.Şti. Merkez Mah. Nadide Sok. Anıttepe Sitesi No:28 34381 Şişli / İstanbul Tel. +90 / 212 / 210 5080 Fax +90 / 212 / 221 7159 info.tr@ifm.com www.ifm.com/tr United Arab Emirates Noor Al-Shomoe Electrical Equipments Est. P.O. Box: 64052 Warehouse No: 27A 6 Street, Al Quoz Industrial 1 Al Quoz, Dubai United Arab Emirates Tel. +9714 3403918 Fax +9714 3403819 Mobile +971 505084834 alshomoe@emirates.net.ae www.nooralshomoe.com United Arab Emirates – Abu DhabiAl Injazat Technical Trading Services P.O. Box 42895 Abu Dhabi United Arab Emirates Tel. +971 2 622 6030 Fax +971 2 622 3050 kamran@injazat.ae United Kingdom ifm electronic Ltd. efector House Kingsway Business Park Oldfield Road Hampton Middlesex TW12 2HD Tel. +44 / 20 / 8213 0000 Fax +44 / 20 / 8213 0001 enquiry_gb@ifm.com www.ifm.com/uk USA ifm efector, inc. 782 Springdale Drive Exton, PA 19341 Tel. +1 / 610 524 2000 Fax +1 / 610 524 2010 info@ifmefector.com www.ifmefector.com Venezuela Petrobornas, C.A. Calle Pricipal, Centro Comercial Astur, Nivel PB, Local 05, Sector Matanzas, UD-321, Puerto Ordaz - Estado Bolivar Venezuela Tel. +58 286-994 3406 Tel. +58 286-718 1123 Fax +58 286-994 3406 Fax +58 286-994 4711 info@petrobornas.net www.petrobornas.net Vietnam Thien Viet Electrical Service and Trading Co., Ltd. 784 Dien Bien Phu Str. Ward 11, Dist. 10 Ho-Chi-Minh-City, Viet Nam Tel: (+84 8) 38309916 38352644/46 – 39381628/29 Fax: (+84 8) 38309915 thivicoltd@hcm.vnn.vn 647 www.ifm.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : ifm electronic Germany Create Date : 2011:11:23 14:12:46+01:00 Keywords : ifm;, catalogue;, english;, 2012;, electronic Modify Date : 2012:07:03 08:16:30+02:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2012:07:03 08:16:30+02:00 Producer : Acrobat Distiller 8.1.0 (Macintosh) Format : application/pdf Title : ifm general catalogue english 2012 Creator : ifm electronic Germany Subject : ifm, catalogue, english, 2012, electronic Rights : ifm electronic Germany 2012 Document ID : uuid:beef27c6-4a86-794b-b167-99d7453be31c Instance ID : uuid:203c56c7-02d2-46c6-aeb9-6ec3b41e68af Marked : True Page Count : 648EXIF Metadata provided by EXIF.tools