Brochure

: Pdf 112258-Brochure 112258-Brochure 804325 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

s
ice ge
v
De Ran 2mm
t
r
o
l
,2
Pi dula nts
e
Mo pon
m
Co

Potentiometers

Operator: Potentiometer
Description

Catalog number

Weight
oz.

Complete Potentiometers
Black knob with integrated position indication and marking in white
With resistor 5 kohm
Potentiometer

Black plastic bezel

MT-105B

1.4

Chrome metal bezel

MT-305B

1.7

Black plastic bezel

MT-110B

1.4

Chrome metal bezel

MT-310B

1.7

Black plastic bezel

MT-150B

1.4

Chrome metal bezel

MT-350B

1.7

With resistor 10 kohm

With resistor 50 kohm

7

Resistor data
Element Catalog No.	 Cermet
Power rating	

2W

Mechanical angle	 280°
Terminals	

Screw terminated

Insulation voltage	 900 V
Operating
temperature	

-1 – +70 °C

Knob without Resistor
Black knob with integrated position indication and marking in white.
For shaft diameter 6 -6.35 mm.
Min. shaft length 20 mm.
Black plastic bezel

KT-100B

1.2

Chrome metal bezel

KT-300B

1.5

Legend plates aluminum
Symbol: see fig. (29.6 x 44.5 mm)

SK 615 562-87

0.071

Scale: 0-10

(48.5 x 44.5 mm)

SK 615 562-88

0.071

Scale: 0-50

(48.5 x 44.5 mm)

1SFA611830R1252

0.071

Catalog number

Weight
oz.

Legend
plates

Buzzers

Operator: Buzzer
Description

Buzzers
Black. Frequency: Approx. 2400 Hz.
Loudness: Min 80 dB (A)/10 cm
Rated Current: < 8 mA.
Service Life:>5000 h
Suitable for both 50 and 60 Hz networks
Buzzer

7.20	
1SXU000023C0202 Rev. A	

Supply voltage

Tone Catalog number

24 V AC/DC

Continuous

KB1-4010

0.020

115 V AC/DC

Continuous

KB1-4030

0.020

230 V AC

Continuous

KB1-4040

0.020

24 V AC/DC

Pulsating

KB1-4110

0.020

115 V AC/DC

Pulsating

KB1-4130

0.020

230 V AC

Pulsating

KB1-4140

0.020

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage

s
ice ge
v
De Ran 2mm
t
r
o
l
,2
Pi dula nts
e
Mo pon
m
Co

7

Technical data

Standards and approvals
IEC / EN 60947-1
Low-Voltage Switchgear and Controlgear
- Part 1: General rules
IEC / EN 60947-5-1
Low-Voltage Switchgear and Controlgear - Part
5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
IEC / EN 60947-5-5
Low-Voltage Switchgear and Controlgear - Part
5-5: Control circuit devices and switching elements - Electrical Emergency Stop device with
mechanical latching function
IEC / EN 60073
Basic and safety principles for man-machine
interface, marking and identification - Coding
principles for indicators and actuators
IEC / EN 60529
Degrees of Protection provided by enclosures (IP
code)
EN 50013
Low-Voltage Switchgear and Controlgear for
industrial use - Terminal marking and distinctive
number for particular control switches
DIN 40050-9

Road vehicles; Degrees of Protection (IP-code);
protection against foreign objects; water and
contact; electrical equipment

UL 508
CSA C22.2 No 14

Industrial Control Equipment
Industrial Control Equipment

Environmental data
Degrees of protection
Operators

IEC/EN DIN

UL/CSA

Pushbutton: MP *

IP66

Double pushbutton:
MPD *
Mushroom pushbutton:
MPM *
Emergency Stop:
MPMT/P *
Selector Switch:
M2SS/M3SS *
Key-operated Selector
Switch: M2SSK/M3SSK *
Toggle Switch:
MTS2/MTS3 *

IP66

IP66

Catalog number 1, 3R, 4, 4X,
12, 13

Extreme Duty
pushbutton: KP6
Reset pushbutton: KPR *

-

Catalog number 1, 3R, 4, 4X

IP 66

Joystick: MJS

IP66, 67, 69K

Pilot lights: ML

IP66

Buzzer: KB
Potentiometer: KT *

IP65
IP66

Contact block and
Transformer block
Plastic Enclosures

IP20

Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 1, 4X (indoor),
12, 13
Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 4X
Catalog number 1, 3R, 4, 4X,
12, 13
-

Metallic Enclosures
Temperature

IP66, 67, 69K

IP66
IP66
IP66
IP66

IP66

Ambient temperature during operation
Storage temperature
*) With Chrome plastic bezel	

IP66	

Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 1, 3R, 4, 4X,
12, 13
Catalog number 1, 3R, 4, 4X, 12

1SXU000023C0202 Rev. A	

Material
No ozone depleting substances in the products.
All front of panel plastic components are made of polycarbonate
PC Polycarbonate
High impact strength, good outdoor resistance.
Chemical resistance (see table below)
PSU Polysulphone
Can withstand high temperatures, acids, basic
solutions, alkaline compounds, oils, alcohols.
PA Polyamide
Can withstand high temperatures, aliphatic,
aromatic and chlorinated hydro­carbons,
esters, ketone-aldehydes, alcohols and basic
solutions.
PBT
Can withstand high temperature, aliphatic and
aromatic hydrocarbons, acids, basic solutions,
alcohols, grease and oils
Zinc
Good corrosion resistance in inland-, sea and
industrial atmosphere.
light-alloy
Good corrosion resistance in inland-, sea and
industrial atmosphere.
Chemical Resistance for Polycarbonate
Chemical Class

Acids
Alcohols and Alkalis

Aliphatic Hydrocarbons
Amines
Aromatic Hydrocarbons
Detergents and Cleaners
Esters
Greases and Oils
Halogenated
Hydrocarbons
Ketones
Silicone Oil and Greases

Effects

No significant effect under most typical conditions of concentration and temperature
Generally compatible at low concentration and
room temperature. Higher concentrations and
elevated temperatures can result in etching
and attack evidenced by decomposition.
Generally compatible
Surface crystallization and chemical attack.
Avoid.
Partial solvents and severe stress cracking
agents (i.e., xylene, toulene). Avoid.
Mild soap solutions are generally compatible.
Strong alkaline materials should be avoided.
Cause severe crystallization. Partial solvents.
Avoid.
Pure petroleum Catalog numbers generally
compatible. Many additives used with them
are not.
Solvents. Avoid.
Cause severe crystallization and stress cracking. Partial solvents. Avoid.
Generally compatible up to 85 oC.

Catalog number 1, 3R, 4, 4X,
12, 13
-25 to +70 °C
-40 to +85 °C
Catalog number 1, 12, 13

Please note that specified degree of protection is for operator mounted on panel. If other
items are mounted in between, please make sure that they are correctly sealed.

7.36	

Technical Data
Terminals
Plus-minus Pozidriv No.2 screw with DIN-washer.
Connectable Area
min. 1 x 0.5 mm2 /AWG 20
max. 2 x 2.5 mm2/2 x AWG14
Tightening Torque
Operators Locking Nut
Min. 2 Nm / Max. 2.3 Nm
Cable Terminals
0.9 Nm

Approvals
The pushbuttons, selector switches and pilot lights are approved by:
-	National approval agencies: UL, CSA and China Compulsory Product
	 Certification
For detail information please contact ABB

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage

Pi
lo
Co Mod t D
mp ula evi
on r R ces
en an
ts, ge
22
m

Technical data

m

Electrical data

Standard contact blocks
Self cleaning silver contacts, NC contact with positive opening. At voltages
and currents below 24 V and 5.6 mA we recommend our Micro Switch
blocks.
Ratings as per IEC 60947-5-1
690 V
Rated Insulation Voltage, Ui
10 A
Rated Thermal Current, Ith
at: 120 V
Rated Operational Current, Ie
8A
Utilization category AC 15,
at: 230 V
6A
at: 400 V
4A
at: 690 V
2A
at: 24 V
5A
Rated Operational Current, Ie
utilisation category DC 13,
at:125 V
1.1 A
at: 250 V
0.55 A
A600
Q600
Ratings as per UL, CSA, NEMA
AC
DC
Rated Insulation Voltage
600 V
600 V
Rated Thermal Current
10 A
2.5 A
Rated Operational Current 	
at: 120 V
6A
at: 125 V 0.55 A
at: 240 V
3A
at: 250 V 0.27 A
at: 480 V
1.5 A
at: 480 V 0.10 A
at: 600 V
1.2 A
at: 600 V 0.10 A
Contact resistance
< 25 mΩ
Compulsory function test
at: 5V, 16 mA
Max. number of contact blocks per operator
The Contact blocks can be stacked in max two levels on the 3- block holder.
Only one level is accepted on the 5-block holder.
pushbutton, Toggle Switch, Mushroom pushbutton,
6
Double pushbutton, Selector Switch, Key-operated
Selector Switch and Emergency Stop Operator
Joystick
8
Modular pushbutton
Short circuit protection
Compact pushbutton
Max. fuse at 1 kA
gG 16A
Diagram for make-and-break contact

Mechanical data
Mechanical life
Mechanical
Standard Contact blocks
pushbuttons, Momentary Mushroom pushbutton Present standard
Selector Switches (no operating of
center contact)
Present standard
(no operation of center contact)

life, selector
switchoperations
10 million

With operating
With operation of center
contact
of center contact

Low Voltage Products & Systems	
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage	

250 000 operations
250 000

7

150 000 operations
150 000

Maintained Mushroom
pushbutton, Key-operated
Selector Switch and Double
pushbutton
Emergency Stop
Toggle Switch
Joystick

500 000 operations

100 000 operations
1 million operations
500 000 operations

400 000 operations

300 000 operations

Compact emergency stop pushbutton

NC

-1

-2

NC

-1

-2

NO

-3

-4

NO

-3

-4

= Closed contact

500 000

500 000 operations

250 000

Make-and-break contact

Micro Switch block / Ratings as per IEC 60947-5-1
Rated Insulation Voltage, Ui
Rated Thermal Current, Ith
at: 125 V
Rated Operational Current, Ie
utilisation category AC 14,
at: 24 V
Rated Operational Current, Ie
utilization category DC 13,
at: 24 V
Rated Operational Current, Ie
utilization category DC 12,
Minimum Switching Capacity
Standard Contact blocks
24 V DC
Gold plated Contact blocks
5 V DC
12 V DC
Micro Switch blocks
3 V DC
Ratings as per UL 508
125 V AC
60 V DC
48 V DC

2 million operations

= Closed contact

125 V
3A
0.5 A
0.3 A
0.1 A

5.6 mA
12 mA
1 mA
1 mA
3A
0.2 A
0.1 A

7.37
1SXU000023C0202 Rev. A

s
ice ge
v
De Ran 2mm
t
r
o
l
,2
Pi dula nts
e
Mo pon
m
Co

Technical data

Lamp block ratings as per IEC 60 947-5-1
Rated Insulation Voltage
230 V
Base
BA 9s
Permissible power, up to
2W
Transformer block
Suitable for Filament bulb 6 or 24 V AC, 1.2 W and LED 24 V.
Rated Power
1.5 W
Rated Insulation Voltage acc. to IEC
Class E
70 °C (DT)

LED bulbs
Service Life for LED bulbs means number of service hours until the brightness
has been reduced down 50 %. Service Life 50 000 h
Color of white LED
x=0.31 Y=0.32 means the position of color in
the ICI Chromaticity Diagram
Voltage Tolerance on LED
-30 to +10 % voltage is acceptable without
bulbs
affecting the Service Life
Voltage Peaks on LED bulbs Voltage Peaks up to 1000 V Current Peaks up
to 500 mA during a few msec
Glowing light
All integrated LED bulbs have a function built in
to cut leakage currents.

7

7.38	
1SXU000023C0202 Rev. A	

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2013:10:15 10:23:37+05:30
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2013:10:15 10:23:49+05:30
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:10:15 10:23:49+05:30
Creator Tool                    : Adobe InDesign CS5 (7.0)
Format                          : application/pdf
Document ID                     : uuid:b92ffb22-713b-4db5-a0cd-47220f00c9cf
Instance ID                     : uuid:f9db1942-4703-4f12-89fb-a8cb5a76aaa1
Producer                        : Adobe PDF Library 9.9
Page Count                      : 4

EXIF Metadata provided by EXIF.tools