Out 63452 GB Copy 112452 Catalog

: Pdf 112452-Catalog 112452-Catalog 032076 Batch5 unilog

Open the PDF directly: View PDF .
Page Count: 171

Download
Open PDF In Browser	View PDF

Gardner Bender

USA
PO Box 3241
Milwaukee, WI 53201-3241
Customer Service 800.624.4320
Tech Support 414.247.5329
Fax 414.352.2377

CANADA
6615 Ordan Drive, Units 14-15
Mississauga, Ontario
L5T 1X2 Canada
905.564.5749
Fax 905.564.0305

www.gardnerbender.com

2009 / 2010 PRODUCT CATALOG

Catalog # AD-250-09

1.800.624.4320

©2009 Gardner Bender

2009/2010 PRODUCT CATALOG

Turn to Gardner Bender for durable,
dependable electrical tools and supplies
that deliver performance and
innovation on the job site.

WIRE CONNECTORS

5

TERMINALS

15

SWITCHES

23

CONDUIT BENDING

31

CONDUIT FISHING

63

HOLE MAKING

95

HAND TOOLS

109

TESTERS

125

CABLE TIES

139

STAPLES

145

WIRE MANAGEMENT

153

INDEX

165

TABLE OF CONTENTS - In Detail
WIRE CONNECTORS

HAND TOOLS

Crimp Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .12
GB Xtreme™ Lugs . . . . . . . . . . . . . . . . . . . . . . . . .14
Twist-on Connectors . . . . . . . . . . . . . . . . . . . . . .7-10
Grounding Accessories . . . . . . . . . . . . . . . . . . . . . .14
Hi-Temp Black Connectors . . . . . . . . . . . . . . . . . . . . .8
Mechanical Lugs . . . . . . . . . . . . . . . . . . . . . . . .12-13
Nylon Pigtail Connectors . . . . . . . . . . . . . . . . . . . . .11
Push-In Connectors (PushGard™) . . . . . . . . . . . . . .11
Winged Connectors (WingGard™) . . . . . . . . . . . . . . .8

Circuit Alert™ . . . . . . . . . . . . . . . . . . . . . . . .111-113
Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122-123
Datacom/VDV . . . . . . . . . . . . . . . . . . . . . . . . .118-119
Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111, 124
Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120-121
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Wire Strippers . . . . . . . . . . . . . . . . . . . . . . . .114-117

TERMINALS & WIRE
Clips & Clamps . . . . . . . . . . . . . . . . . . . . . . . . . .21
Butt Splices & Kits . . . . . . . . . . . . . . . . .17, 19, 20
Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19
Ring Terminals . . . . . . . . . . . . . . . . . . . . . . .17, 18
Spade Terminals . . . . . . . . . . . . . . . . . . . . . . . . .17
GB Xtreme™ Terminals . . . . . . . . . . . . . . . . . . . .17
Tap Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Terminal Blocks . . . . . . . . . . . . . . . . . . . . . . . . . .19
Underground UF Splice Kits . . . . . . . . . . . . . . . .20
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

SWITCHES
Door Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Pull Chain Switches . . . . . . . . . . . . . . . . . . . .28, 29
Push Button Switches . . . . . . . . . . . . . . . . . .27, 28
Rocker Switches . . . . . . . . . . . . . . . . . . . . . . . . .29
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . .30
Toggle Switches . . . . . . . . . . . . . . . . . . . . . .26, 27
Toggle Switch Cover . . . . . . . . . . . . . . . . . . . . . .27

CONDUIT BENDING
Cyclone™ Electric Bender (B2000) . . . . . . . . . . . . .34
Hand Benders (including Big Ben™) . . . . . . . . .56-58
Hydraulic Benders / Accessories . . . . . . . . . . . .38-51
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-49
PVC Benders & Plug Sets . . . . . . . . . . . . . . . . . .59-61
Sidewinder® Electric Bender (B2555) . . . . . . . . . . .35
Sidewinder® Mechanical Benders . . . . . . . . . . .52-55
Ultra Eegor™ Hydraulic Bender . . . . . . . . . . . . .38-39
Storage Cases (Tool-Guard™) . . . . . . . . . . . . . . . . .62

CONDUIT FISHING
Blower Systems . . . . . . . . . . . . . . . . . . . . . . . .66-67
CO2 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .69-70
Fish Sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Fish Tapes (including UpperHand™) . . . . . . . . . .74-78
Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86-88
Pull Line/Line Carriers . . . . . . . . . . . . . . . . . . . .71-73
Pullers & Accessories . . . . . . . . . . . . . . . . . . . . .80-86
Reel Rollers & Jacks . . . . . . . . . . . . . . . . . . . . . . . .91
Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-89
Wire Caddies & Carts . . . . . . . . . . . . . . . . . . . . .92-94

HOLE MAKING

4

35-Ton Hydraulic Punch . . . . . . . . . . . . . . . . . . . . .102
Drawstuds . . . . . . . . . . . . . . . . . . . . . . . . . . .104-105
Step Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Slug-Out™ Sets for Mild & Stainless Steel . . .97-107
Stud Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

TESTERS
Battery Tester (analog) . . . . . . . . . . . . . . . . . . . . . .136
Continuity Testers . . . . . . . . . . . . . . . . . . . . . . . . .129
Multimeters (analog, digital, clamp-on) . . . . . .133-135
Non-Contact Voltage Testers . . . . . . . . . . . . . . . . .130
Receptacle Testers/Analyzers . . . . . . . . . . . . . . . . .131
Tester Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Tone & Trace . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Voltage Testers . . . . . . . . . . . . . . . . . . . . . . . .127-129

CABLE TIES
Colored . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Grip Strip™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Miniature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Mounting Bases & Ties . . . . . . . . . . . . . . . . .143, 144
Releaseable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Tensioning Tools . . . . . . . . . . . . . . . . . . . . . . . . . .144

STAPLES
Category 3 & 5 Data . . . . . . . . . . . . . . . . . . . . . . .151
Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Conduit Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Fiber-Insulated . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Insulated Metal . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . .150, 152
Masonry . . . . . . . . . . . . . . . . . . . . . . . . . . . .150, 151
MultiCable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Roofing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Service Entrance . . . . . . . . . . . . . . . . . . . . . .148, 150
Staple Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

WIRE MANAGEMENT
Electrical Reference Books . . . . . . . . . . . . . . . . . .163
Anchor Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Box Supports/Spacers . . . . . . . . . . . . . . . . . .161, 163
Bushings/Insulators . . . . . . . . . . . . . . . . . . . . . . . .178
Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Duct Seal Compound . . . . . . . . . . . . . . . . . . . . . . .160
Hanger Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Heat-Shrink Tubing . . . . . . . . . . . . . . . . . . . .156, 157
Knockout Seals . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Screw Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Split Flex Tubing/Spiral Wrap . . . . . . . . . . . . . . . . .157
Stud Insulators . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Wire Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
Romex® is a registered trademark of the
Southwire Company, Carrollton, GA

WIRE CONNECTORS

7

9

11

Made of top-quality materials,
Gardner Bender wire connectors are

12

engineered to exceed the expectations
of professional electricians.

12

5

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Aluminum Mechanical Lugs . . . . . . . . . . . . . . . . . .13
Aluminum Splicer-Reducers . . . . . . . . . . . . . . . . . .13
Aluminum Split Bolt Connectors . . . . . . . . . . . . . . .12
Anti-Oxidant Compound (Ox-Gard™) . . . . . . . . . . .14
Copper Mechanical Lugs . . . . . . . . . . . . . . . . . . . . .13
Copper Split Bolt Connectors . . . . . . . . . . . . . . . . .12
Crimp Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .12
GB Xtreme™ Lugs . . . . . . . . . . . . . . . . . . . . . . . . . .14
Grounding Connectors (GreenGard™) . . . . . . . . . .10
Grounding Accessories . . . . . . . . . . . . . . . . . . . . . .14
Hi-Temp Black Connectors . . . . . . . . . . . . . . . . . . . .8
Multi-Range Connectors (Hex-Lok™) . . . . . . . . . . . .9
Pigtail Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .11
Push-In Connectors (PushGard™) . . . . . . . . . . . . .11
Straight-Sided Connectors (WireGard™) . . . . . . . . .7
Universal Connectors (Uni-Lok™) . . . . . . . . . . . . . .10
Winged Connectors (WingGard™) . . . . . . . . . . . . . .8

6

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

WireGard™ Color-Coded Screw-On Wire Connectors
The industry standard twist-on connector with top quality,
performance and durability.
• Color-coded for easy size selection.
• Tight, square-wire spring makes quick, secure connections
for positive continuity.
• Tough, thermoplastic shell shields against environmental extremes.
• Resists chemical action from hydrocarbons, diluted acid
or alkaline solutions.
• Flame-retardant properties resist heat distortion up to 105 °C (221 °F).
• High-dielectric shell features deep skirt design to prevent exposure of bare wire.
• Copper-to-copper connections only.
Color

Part #

Pkg Qty

10-001

100/box

Wire Range

Min

Max
®

GB-1

12-001

25,000/bulk keg
12-001BU 150,000/bulk barrel #22 - #16 AWG

(71B)

16-001

150/jar

19-001

14/card

25-001

25/resealable bag

10-002

100/box

12-002

10,000/bulk keg

1 #20

(connections rated
w/1 #22
at 300 V Max.)

2 #16

B

GB-2

12-002BU 96,000/bulk barrel #22 - #16 AWG

(72B)

16-002

150/jar

19-002

14/card

25-002

25/resealable bag

10-003

100/box

(connections rated 3 #22
at 300 V Max.)

13-003

500/bag

16-003

100/jar

(73B)

16-003M

300/jar

17-003

50/bag

19-003

12/card

25-003

25/resealable bag

10-004

100/box

C
D

3 #16

E

Dimensions
A
GB-1

12-003BU 53,000/bulk barrel
GB-3

A

GB-2
#22 - #14 AWG
(connections rated 3 #20
at 300 V Max. and
600 V Max.) 2

4 #16
w/1 #20

GB-3
GB-4
GB-6

B

C

D

E

37

⁄ 64" 11⁄ 64" 1⁄ 8" 1⁄ 4" 21⁄ 64"
45 ⁄ 64" 11⁄ 64" 3 ⁄ 16" 5 ⁄ 16" 25 ⁄ 64"
27⁄ 32" 21 ⁄ 64" 13 ⁄ 64" 11⁄ 32" 7⁄ 16"
15
⁄ 16" 17⁄ 64" 15 ⁄ 64" 7⁄ 16" 35 ⁄ 64"
1
1 ⁄ 16" 17⁄ 64" 21⁄ 64" 17⁄ 32" 21⁄ 32"

12-004BU 32,400/bulk barrel
GB-4
(74B)

13-004

500/bag

16-004

200/jar

17-004

50/bag

19-004

9/card

25-004

25/resealable bag

10-006

100/box

#18 - #10 AWG
(connections rated 1 #14
at 300 V Max. and w/1 #18
600 V Max.) 2

4 #14

12-006BU 21,000/bulk barrel
GB-6
(76B)

13-006

250/bag

#18 - #10 AWG

16-006

125/jar

17-006

50/bag

(connections rated 2 #14
at 300 V Max. and
600 V Max.) 2

19-006

6/card

25-006

25/resealable bag

2 #10
w/2 #12

Note: Connection rated at 600 V Max. for building wiring and rated at 1000 V Max. in lighting fixtures/luminaries and signs.
See carton for detailed wire combination ratings.
2

Assortments
Part #

Pkg Qty

Description

19-AWC

9/card

2 gray, 2 orange, 3 yellow, 3 red

25-AWC

25/resealable bag

3 gray, 4 blue, 6 orange, 6 yellow, 6 red

7

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
GB-4

GB-3

Hi-Temp Black Connectors for Tough Environments
Connectors manufactured with high-temperature-rated plastic
to withstand extreme temperatures.
• Temperature-rated to 150 °C (302 °F).
• Available in two standard models.
• Copper-to-copper connections only.
Model

(Size) Part #

GB-3

(73B)

GB-4

(74B)

Pkg Qty

Wire Range

27-003

Max

#22 - #14 AWG

3 #20

4 #16 w/1 #20

#18 - #10 AWG1

1 #14 w/1 #18 4 #14

1

10,000/bulk keg

10-004HT 100/box
27-004

Min

®

10-003HT 100/box

10,000/bulk keg

1 Connections rated at 300 V Max. and 600 V Max.
Note: Connection rated at 600 V Max. for building wiring and rated at 1000 V Max. in lighting fixtures/luminaries and signs.
See carton for detailed wire combination ratings.

WingGard™ Color-Coded Twist-On Wire Connectors
Unsurpassed quality and durability in a high-leverage, easy-on wing-type design.
• Wings are knurled for a sure grip and offset from centerline for greater
twisting leverage.
• Square-wire plated spring instantly adjusts to the shape and size of the splice.
• Flame-retardant properties resist heat distortion up to 105 °C (221 °F).
• High-dielectric shell features deep skirt design to prevent exposure of bare wire.
• Copper-to-copper connections only.
Color

Part #

Pkg Qty

10-084

100/box

Wire Range

Min

Max
®

12-084BU 42,000/bulk barrel

#84™

13-084

500/bag

16-084

100/jar

16-084M

225/jar

17-084

50/bag

19-084

6/card

25-084

25/resealable bag

10-086

100/box

#22 - #10 AWG
(connections rated 2 #22
at 300 V Max. and
600 V Max.)

A

3 #12

B
C
D
E

12-086BU 22,500/bulk barrel

#86™

#89™

13-086

500/bag

16-086

125/jar

16-086L

325/jar

17-086

50/bag

19-086

6/card

25-086

25/resealable bag

10-089

50/box

13-089

100/bag

19-089

2/card

25-089

10/resealable bag

#22 - #6 AWG
(connections rated 2 #20
at 300 V Max. and
600 V Max.)

Dimensions
4 #10
#84™
#86™
#89™

#14 - #6 AWG
(connections rated 1 #10
at 300 V Max. and w/1 #12
600 V Max.)

1 #6 Str
w/2
#8 Str

Note: Connection rated at 600 V Max. for building wiring and rated at 1000 V Max. in lighting fixtures/luminaries and signs.
See carton for detailed wire combination ratings.

Assortments

8

Part #

Pkg Qty

Description

16-8486

100/jar

50 red, 50 yellow

A

16-8486M 160/jar

80 red, 80 yellow

19-AWW 5/card

2 yellow, 2 red, 1 large gray

25-AWW 25/resealable bag

8 yellow, 8 red, 7 tan, 2 blue

B

11⁄ 32" 5⁄ 16"

C
7⁄ 32

D

E

" 1 ⁄ 4" 23⁄ 32"
11⁄ 4" 5 ⁄ 16" 9 ⁄ 32" 7⁄ 16" 29⁄ 32"
11⁄ 2" 7⁄ 16" 3 ⁄ 8" 3⁄ 4" 11⁄ 4"

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Gardner Bender Twist-On Wire Connectors
Engineered to exceed the expectations of professional electricians.
Zinc plated spring
to resist corrosion

All GB Twist-On Wire Connectors:
Swept wings for added
turning torque (WingGard™,
Hex-Lok®, GreenGard™)

• Are designed to make wiring jobs fast,
easy, safe and reliable.
• Provide maximum application flexibility
by offering contractors myriad packaging
options, ergonomic designs and
wire ranges.
• Exceed UL standards for dielectric
strength, wire pullout force and static
heat resistance.

Square wire
spring for secure
connection

• Are manufactured of top-quality materials.
• Meet the requirements of nearly
all budgets.

Thermoplastic shell
for strength and
chemical resistance

• Are continually evaluated for
improvements and enhancements.

Deep skirt for smooth wire entry
and coverage of stripped wires

Hex-Lok® Multi-Range Wire Connectors
Multi-range, hex-head copper-to-copper connector covers 95%
of everyday applications.
• Streamlined design for compact installations.
• Square-wire spring grabs and holds wires for secure connections.
• Long skirt covers stripped wires.
• Rated at 600 V Max. in building wire and at 1000 V Max. in lighting
fixtures/luminaries and signs.

F

• Copper-to-copper connections only.
Color

Part #

Pkg Qty

10-1H1

100/box

Wire Range

Min

Max
®

12-1H1BU 28,000/bulk barrel
H1

E

13-1H1

500/bag

16-1H1

175/jar

16-1H1L

400/jar

17-1H1

50/bag

19-1H1

6/card

25-1H1

25/resealable bag

C

10-2H2

50/box

B

#22 - #8 AWG

3 #22

3 #10
D

A

12-2H2BU 16,000/bulk barrel
H2

13-2H2

250/bag

19-2H2

6/card

25-2H2

25/resealable bag

#14 - #6 AWG

3 #14

Dimensions

1 #6
w/1 #8

A
H1
H2

B

C

D

E

F

47 64

⁄ " 9 ⁄ 16" 5 ⁄ 16" 21⁄ 61"15 ⁄ 32" 5 ⁄ 16"
1" 15 ⁄ 32" 25⁄ 64" 13 ⁄ 32"121⁄ 64" 7⁄ 16"

9

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Uni-Lok™ Universal Wire Connectors
Versatile and cost-effective, Uni-Lok™ connectors are designed to
accept a wide range of wire combinations.
• Swept mini-wings provide additional torque.
• Square-wire spring grabs and holds wires for secure connections.
• Long skirt covers stripped wires.
• Rated at 600 V Max. in building wire and at 1000 V Max. in lighting
fixtures/luminaries and signs.
• Copper-to-copper connections only.
Color

Part #

Pkg Qty

10-1G1

100/box

Wire Range

Min

Max
E

®

12-1G1BU 40,000/bulk barrel
G1

13-1G1

500/bag

19-1G1

6/card

25-1G1

25/resealable bag

10-2G2

100/box

#22 - #12 AWG

3 #12

4 #22

D

C
B
A

12-2G2BU 24,000/bulk barrel
G2

Dimensions
3 #20

#22 - #10 AWG

5 #12

13-2G2

500/bag

19-2G2

6/card

G1

25-2G2

25/resealable bag

G2

A

B

C

D

E

31

⁄ 64" 27⁄ 64" 9⁄ 32" 13⁄ 32" 63⁄ 64"
37
⁄ 64" 33⁄ 64" 23⁄ 64" 27⁄ 64"111⁄ 64"

GreenGard™ Grounding Wire Connectors
Specifically designed for making positive ground connections, GreenGard™ connectors
feature the same live-action as GB WingGard™ connectors with the added plating
protection for corrosion resistance in grounding applications.
• Easier to use — New design enables torque-up with improved grip.
• Contoured, offset wings enable firm ground connections.
• Flame retardant, thermoplastic shell resists punctures, cuts, abrasion and corrosion.

A

• Connectors have a hole in the tip for ground wire.
• Solid copper-to-copper connections only.
Color

#95™

10

B

Part #

Pkg Qty

Wire Range

Min

10-095

100/box

13-095

500/bag

#14 - #10 AWG

16-095

125/jar

19-095

6/card

(connections rated 2 #14
at 600 V Max.)

25-095

25/resealable bag

C
D
E

Max

4 #12

Dimensions
A
#95™

11⁄4"

B

C

D

E

5⁄16" 9⁄32" 7⁄16" 29⁄32"

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

PushGard™ Push-in Wire Connectors
Easy and fast to use, just strip and push conductors into PushGard™
connectors to make reliable, secure connections.
• Simplified insertion and compact size helps in tight locations.
• Clear polycarbonate housings have color-coded side panels for
connection verification and identification.
• With corrosion-resistant stainless steel springs, PushGard™
connectors restrict wire pullout, yet corrections are possible with a
simple left-right twist and pull.
• Continuity test point for easy voltage checks.
• Available in 2-,3-,4 and 8-port configurations.
• Rated at 600 V Max. in building wire and at 1000 V Max.
in lighting fixtures/ luminaries.

PC2

• Copper-to-copper connections only.

.37"
.41"

Color

Ports

2

PC2

3

PC3

4

PC4

PC8

8

Part #

Pkg Qty

Wire Range

10-PC2

100/box

19-PC2

10/clam

#22 - #12
AWG Solid

.77"

PC3

.37"

(connections rated
at 600 V Max.)

10-PC3

100/box

19-PC3

10/clam

10-PC4

100/box

19-PC4

10/clam

10-PC8

50/box

19-PC8

10/clam

#22 - #12
AWG Solid
(connections rated
at 600 V Max.)

#22 - #12
AWG Solid

.53"
PC4

.37"

(connections rated
at 600 V Max.)

#22 - #12
AWG Solid
(connections rated
at 600 V Max.)

.78"

.68"

.78"

PC8

.66"

.69"

.75"

Nylon Pigtail Connectors
Closed-end crimp connector designed for use with solid or stranded wire.
• Two sizes available.
• Vibration resistant.
• Tin-plated seamless copper.
• Corrosion and chemical resistant.
Part #

Pkg Qty

20-089

10/clam

Wire Range
#22 - #14 AWG

Min
2 #22

Max
1 #14 w/1 #18

20-090

10/clam

#22 - #12 AWG

3 #18

1 #10 w/1 #20

11

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Crimp Connectors

411

311

Use GB crimp connectors for strong, vibration-resistant
permanent connections in branch circuit and fixture wiring.

410

310

• Two styles and sizes available.
• Copper or zinc-plated steel.
FOR MORE INFO ON

SEE PG

GCP-3400
Crimp Tool

121
Copper
Part #

Model

Pkg Qty

10-310

310

100/box

10-310C 310

100/clam

10-311

50/box

311

10-311C 311

50/clam

Wire Range

Min

Max

#18 - #10 AWG

2 #16

2 #10 w/1 #12

#14 - #8 AWG

3 #12

4 #10

®

C

A

Zinc-plated Steel
Part #

Model

Pkg Qty

10-410

410

100/box

10-410C

410

100/clam

13-410

410

500/bag

20-410

410

12/clam

10-411

411

50/box

10-411C

411

50/clam

20-411

411

8/clam

Wire Range

Min

Max

#18 - #10 AWG

2 #16

2 #10
w/1 #12

D
B

Dimensions
Model
#14 - #8 AWG

3 #12

4 #10

A

B

C

D

310/410

3⁄8" 19⁄64" 1⁄4" 13⁄64"

311/411

5⁄8" 23⁄64" 21⁄64" 17⁄64"

Copper Split Bolt Connectors
All-copper alloy construction for high mechanical strength, maximum
conductivity and low resistance.
• Accept a wide range of solid and stranded conductors from
16 AWG – 3/0 AWG.
®

• Can be torqued with standard wrenches.

Part #

Pkg Qty Wire Gauge

Part #

GSBC-8

2/clam

#16 - #10 AWG Stranded, #16 - #8 AWG Solid

GSBC-1/0 1/clam

Pkg Qty Wire Gauge
#4 - #0 AWG Solid

GSBC-6

2/clam

#10 AWG Stranded, #10 - #8 AWG Solid

GSBC-2/0 1/clam

#2 - #00 AWG Solid

GSBC-4

2/clam

#8 - #4 AWG Solid

GSBC-3/0 1/clam

#2 - #000 AWG Solid

GSBC-2

2/clam

#6 - #2 AWG Solid

Aluminum Split Bolt Connectors
Constructed of high-strength aluminum with oxide-displacing jaws to
prevent galvanic corrosion.
• Accept conductors from 10 AWG – 4/0 AWG.
• Use GB OX-GARD™ anti-oxidant treatment on Al-Al and Al-Cu to prevent
corrosion and permit cooler connections.

12

Part #

Pkg Qty Wire Gauge

GAK-2

1/clam

#8 - #2 AWG Solid

GAK-1/0 1/clam

#8 - #0 AWG Solid

GAK-2/0 1/clam

#10 AWG Stranded, #10 - #00 AWG Solid

GAK-4/0 1/clam

#6 - #0000 AWG Solid

®

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Aluminum Mechanical Lugs
• Feature high-strength, low-resistance aluminum construction.
• Accepts conductors from 14 AWG - 2/0 AWG.
• For 3⁄8" stud.
• Use GB OX-GARD™ anti-oxidant treatment on Al-Al and Al-Cu to
prevent corrosion and permit cooler connections.
®

1 Conductor
Part #

Pkg Qty Wire Gauge

GTA-2

2/clam

#14 - #10 AWG Stranded, #14 - #2 AWG Solid

GTA-2/0

2/clam

#14 - #10 AWG Stranded, #14 - #00 AWG Solid

Copper Mechanical Lugs
Provide maximum mechanical strength and minimum resistance.
• All-copper alloy construction features a compact design that is reusable.
• Accept a wide range of solid and stranded conductors from
14 AWG – 0 AWG.

®

• For 3⁄8" stud.
Part #

Pkg Qty Wire Gauge

Part #

Pkg Qty Wire Gauge

GSLU-25 2/clam

#14 - #10 AWG Stranded

GSLU-70 2/clam

#8 - #2 AWG Solid

GSLU-35 2/clam

#14 - #10 AWG Stranded, #14 - #6 AWG Solid

GSLU-125 2/clam

#6 - #0 AWG Solid

Aluminum Splicer-Reducers
Designed to splice similar-gauge conductors or reduce the gauge from
a larger wire diameter to a smaller one.
• Galvanic corrosion is limited by an internal wire stop, preventing direct
contact of dissimilar metals inside.
• Use GB OX-GARD™ anti-oxidant treatment on Al-Al and Al-Cu to prevent
corrosion and permit cooler connections.
Part #

Pkg Qty Wire Gauge

GSPA-2

2/clam

#14 - #10 AWG Stranded, #14 - #2 AWG Solid

GSPA-0

1/clam

#14 - #10 AWG Stranded, #14 - #0 AWG Solid

GSPA-4/0 1/clam

SEE PG

14

FOR MORE INFO ON

Ox-Gard™

#6 - #0000 AWG Solid

13

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

GB Xtreme™ Lugs
Heavy-duty lugs made from pure copper for maximum current flow.

For Harsh
Environments

• Tinned for corrosion resistance.
• Seamless barrel for maximum strength.
• Closed ends seal out moisture.
Part #

Pkg Qty

Wire Gauge Stud Size

Part #

Pkg Qty

Wire Gauge Stud Size

AML-200

2/clam

#6 AWG

1

AML-205

2/clam

#2 AWG

5

AML-201

2/clam

#6 AWG

5

AML-206

2/clam

#2 AWG

3

AML-202

2/clam

#6 AWG

3

AML-207

2/clam

#1/0 AWG

3

AML-203

2/clam

#4 AWG

5

AML-208

2/clam

#2/0 AWG

3

AML-204

2/clam

#4 AWG

3

⁄ 4"
⁄ 16"
⁄ 8"
⁄ 16"

⁄ 16"
⁄ 8"
⁄ 8"
⁄ 8"

⁄ 8"

Grounding Accessories

14-GRC

Convenient grounding accessories
include products suitable for most
job requirements.
• Zinc-plated grounding clips provide
positive grounding to switch, outlet or
junction boxes for #10, 12, 14 AWG
copper grounding wire.

GGC-1014C

GGS-1032HC
SEE PG

10

FOR MORE INFO ON

Grounding
Wire Connector

Part #

Pkg Qty

Description

GGP-1261

25/bag

Grounding Pigtail; #12 AWG Solid

Length Ends

GGP-1273

25/bag

Grounding Pigtail; #12 AWG Str

7"

GGP-1282

25/bag

Grounding Pigtail; #12 AWG Str

8"

GGP-1461

25/bag

Grounding Pigtail; #14 AWG Solid

61⁄ 2"

GGP-1502

2/card

Grounding Pigtail; #12 AWG Solid

8"

14-GRC

1/card

Grounding Clamp for 1⁄2" - 1" pipe

GGC-1014C

50/clam

Grounding Clip for #10, #12 or #14 AWG

GGC-1508

8/card

Grounding Clip for Aluminum or Copper; Grounding wire; Zinc plated

61⁄ 2"

Captured screw/stripped
Stripped/bare fork terminal
Captured screw/bare fork terminal
Captured screw/stripped
Captured screw/bare fork terminal

GGS-1032HC 100/clam Hex-Head Ground Screw
GGS-1512R

12/card

Green Round Washer Head Screw for Switch and Outlet Boxes

Ox-Gard™ Anti-Oxidant Compound
The perfect safeguard for aluminum-to-aluminum, aluminum-to-copper
wire connections and aluminum conduit joints.
• Guards against oxidation.
• Improves conductivity; penetrates aluminum oxide to maintain
inter-strand and inter-conductor current paths.
• Produces a cooler connection.

14

Part #

Pkg Qty

Description

OX-100

1/tube

1 oz Squeeze Tube

OX-100B

1/tube

1 oz Squeeze Tube (blister pack)

OX-400

1/tube

4 oz Squeeze Tube

OX-800

1/tube

8 oz Squeeze Tube

GGP-1273

• Grounding clamps listed for direct burial and connection of
ground wire to ground rod.

GGP-1261

• Hex-head grounding screws secure ground wires to circuit box.

TERMINALS & WIRE

17

17

20

Dependable and easy-to-use,
Gardner Bender terminals and wiring

21

accessories offer the high quality
and application flexibility that
professionals demand.

21

15

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Alligator Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Battery Charging Clips, Clamps . . . . . . . . . . . . . . .21
Bullet Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Butt Splices & Kits . . . . . . . . . . . . . . . . . . . .17,19,20
Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
GB Xtreme™ Terminals . . . . . . . . . . . . . . . . . . . . . .17
Ring Terminals . . . . . . . . . . . . . . . . . . . . . . . . . .17,18
Spade Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Tap Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Underground UF Splice Kit . . . . . . . . . . . . . . . . . . .20
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

16

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

GB Xtreme™ Terminals
Constructed with Heat Shrink insulation – adhesive lined to waterproof and
environmentally seal electrical connections when crimped and heated.

For Harsh
Environments

• Insulates and protects connections from wire pullout, moisture intrusion and abrasion.
• Heat-activated adhesive melts and flows to create a seal.
• Resists salt water, oil, gasoline and other environmental contaminants.

Ring Terminals

Spade Terminals

®

22-18 Gauge

®

22-18 Gauge

Butt Splices

®

22-18 Gauge

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

AMT-100

3/clam

10

AMT-110

3/clam

8

AMT-120

3/clam

AMT-121

25/clam

16-14 Gauge

16-14 Gauge

16-14 Gauge

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

AMT-103

3/clam

8

AMT-113

3/clam

8

AMT-123

3/clam

AMT-124

25/clam

12-10 Gauge

12-10 Gauge

12-10 Gauge

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

AMT-106

3/clam

8

AMT-116

3/clam

8

AMT-126

3/clam

AMT-108

3/clam

1/4"

AMT-127

25/clam

Assortment

Part #

Pkg Qty

22-10 AWG assorted
butt splices

SEE PG

FOR MORE INFO ON

116

Crimp Tools

General Purpose Terminals
Quick and reliable crimp-type wire connections.
• Color-coded by wire gauge size.

Description

GBX-TK 24/card

• Available in a variety of packaging options and stud sizes.
• Includes Spade and Ring Terminals, Disconnects, and Bullet, Butt & Tap Splices (p.17-19)

Spade Terminals - Vinyl-Insulated Barrel

16-14 Gauge

• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
®

22-18 Gauge

Part #

Pkg Qty

Stud Size

10-113

100/clam

4 to 6

10-114

100/clam

8 to 10

20-113

20/clam

4 to 6

20-114

20/clam

8 to 10

21-113

10/clam

4 to 6

21-114

10/clam

8 to 10

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

Stud Size

10-111

100/clam

4 to 6

10-116

50/clam

8 to 10

10-112

100/clam

8 to 10

20-116

14/clam

8 to 10

20-111

20/clam

4 to 6

21-116

8/clam

8 to 10

20-112

20/clam

8 to 10

21-111

10/clam

4 to 6

21-112

7/clam

8 to 10

12-10 Gauge

17

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Ring Terminals - Vinyl-Insulated Barrel

Disconnects - Vinyl-Insulated Barrel

• Rated at 600 Volt Max.

• Rated at 600 Volt Max.

• Temperature rating: 167 °F (75 °C).

• Temperature rating: 167 °F (75 °C).

22-18 Gauge

16-14 Gauge

Part #

Pkg Qty

Stud Size

Part #

Pkg Qty

Tab

Type

20-102

22/clam

8 to 10

10-141F

100/clam

0.250"

Female

21-101

10/clam

4 to 6

20-141F

21/clam

0.250"

Female

21-102

10/clam

8 to 10

20-141M

18/clam

0.250"

Male

21-141F

10/clam

0.250"

Female

21-141M

10/clam

0.250"

Male

21-146F

10/clam

0.187"

Female

21-146M

10/clam

0.187"

Male

22-18 Gauge

Part #

Pkg Qty

Stud Size

10-103

100/clam

4 to 6

10-104

100/clam

8 to 10

Part #

Pkg Qty

Tab

Type

20-103

22/clam

4 to 6

10-143F

100/clam

0.250"

Female

20-104

22/clam

8 to 10

20-143F

20/clam

0.250"

Female

20-105

17/clam

12 to 1⁄ 4"

20-143M

18/clam

0.250"

Male

21-103

10/clam

4 to 6

21-143F

10/clam

0.250"

Female

21-104

10/clam

8 to 10

21-143M

10/clam

0.250"

Male

21-105

7/clam

12 to 1⁄ 4"

21-1055

7/clam

5

Part #

Pkg Qty

Tab

Type

Part #

Pkg Qty

Stud Size

10-145F

100/clam

0.250"

Female

10-106

50/clam

8 to 10

16/clam

0.250"

Female

10-107

50/clam

12 to 1⁄ 4"

20-145F

16/clam

0.250"

Male

10-108

50/clam

1

20-145M
21-145F

8/clam

0.250"

Female

20-106

14/clam

8 to 10

8/clam

0.250"

Male

20-107

14/clam

12 to 1⁄ 4"

21-145M

20-108

13/clam

1

21-106

8/clam

8 to 10

21-107

7/clam

12 to 1⁄ 4"

21-108

7/clam

5⁄ 16"

to 3⁄ 8"

Disconnects - Fully-Insulated

21-109

7/clam

7⁄ 16"

to 1⁄ 2"

• Rated at 600 Volt Max.

16-14 Gauge

⁄ 16" to 3⁄ 8"

12-10 Gauge
12-10 Gauge

⁄ 4" to 3⁄ 8"

⁄ 4" to 3⁄ 8"

• Temperature rating: 167 °F (75 °C).
6 Gauge

Part #

Pkg Qty

Tab

Type

10-151F

100/clam

0.250"

Female

4/card

3

20-151P

20/clam

0.250"

F/M Pairs

4/card

1

21-151F

6/clam

0.250"

Female

21-151M

6/clam

0.250"

Male

Part #

Pkg Qty

Tab

Type

10-153F

100/clam

0.250"

Female

10-153P

100/clam

0.250"

F/M Pairs

20-153P

20/clam

0.250"

F/M Pairs

21-153F

6/clam

0.250"

Female

21-153M

6/clam

0.250"

Male

Part #

Pkg Qty

Tab

Type

10-155F

50/clam

0.250"

Female

21-155F

4/clam

0.250"

Female

21-155M

4/clam

0.250"

Male

Part #

Pkg Qty

Stud Size

14-095

4/card

1⁄ 4"

14-096
14-097

22-18 Gauge

⁄ 8"

⁄ 2"

16-14 Gauge
4 Gauge

Part #

Pkg Qty

Stud Size

14-098

4/card

3

14-099

4/card

1

⁄ 8"

⁄ 2"

12-10 Gauge

18

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Bullet Splice - Fully Insulated

Tap Splices

• Rated at 600 Volt Max.

• Secure connections without stripping wire.

• Temperature rating: 167 °F (75 °C).

• Rated at 300 Volt Max.

22-18 Gauge

Part #

Pkg Qty

Tab

Type

20-161P

20/clam

0.250"

F/M Pairs

21-161F

6/clam

0.156"

Female

21-161M

6/clam

0.156"

Male

• Temperature rating: 221 °F (105 °C).
Part #

Pkg Qty

20-2218

5/clam12

21-2218

5/clam13

Part #

Pkg Qty

10-100

25/clam

Type

20-100

5/clam12

21-100

5/clam13

Part #

Pkg Qty

20-1210

4/clam12

22-18 Gauge

16-14 Gauge

Part #

16-14 Gauge

Pkg Qty

Tab

20-163P

20/clam

0.250"

F/M Pairs

21-163F

6/clam

0.156"

Female

21-163M

10/clam

0.156"

Male

12-10 Gauge

10 clams/master

12

5 clams/master

13

Butt Splices
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
22-18 Gauge

Part #

Pkg Qty

Part #

Pkg Qty

Part #

Pkg Qty

10-121

100/clam

10-123

100/clam

10-126

50/clam

20-121

22/clam

20-123

21/clam

20-126

15/clam

21-121

10/clam

21-123

10/clam

21-126

8/clam

Terminal Blocks

16-14 Gauge

12-10 Gauge

®

• Rated at 30 Amp/600 Volt max.
• Temperature rating: -40 °F (-40 °C) to 260 °F (130 °C).
• Wire range 22-10 AWG.
• Accepts #8 stud size.
Part #

No. of Poles

Pkg Qty

GTB-406

6

1/clam

GTB-408

8

1/clam

GTB-410

10

1/clam

GTB-406

GTB-408

GTB-410

Terminal and Connector Kits
• Large selection of popular terminals and connectors.
• Assorted wire ranges, terminal and connector types.

SEE PG

FOR MORE INFO ON

116

Crimp Tools

Part #

Pkg Qty

TK-1210

28/card

Description
Ring and spade terminals, butt splices, male and female disconnects, 12-10 AWG

TK-32

32/card

WireGardTM and nylon pigtail connectors, 22-10 AWG

TK-40

40/card

Ring and spade terminals, butt splices, female disconnects, 22-10 AWG

TK-1822

46/card

Ring and spade terminals, butt splices, male and female disconnects, 22-18 AWG

TK-1614

48/card

Ring and spade terminals, butt splices, male and female disconnects, 16-14 AWG

TK-100

80/reusable case

WireGardTM connectors, ring and spade terminals, butt and tap splices, female disconnects, 22-10 AWG

TK-175

175/reusable case Ring and spade terminals, butt splices, male and female disconnects, 22-10 AWG

TK-500

500/card

WireGardTM and nylon pigtail connectors, ring and spade terminals, butt and tap splices,
male and female disconnects, 22-10 AWG

19

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Underground UF Splice Kit
Accommodates waterproof splicing of #14 - #8 AWG UF copper wire.
• Connector set screws engage each wire securely for a solid splice.
• Minimum conductor size 14/2 with ground.
• Maximum conductor size 8/3 with ground.
• Rated at 600 V max.
Part #

Pkg Qty

Description

HST-1300

1 kit

Underground UF Splice Kit

®

Kit Contains:
Qty Description
4

Screw Splice Connectors

1

8" Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight
Adhesive Liner

Butt Splice Kit (#8 - #2 AWG)
Used for waterproof installation or repair of #8 - #2 AWG copper cable.
• Easy to use.
• Seal with heat gun or torch.
• Eliminates messy epoxies, tapes or mastics.
• Rated at 600 V max.
Part #

Pkg Qty

Description

HSB-28

1 kit

Butt Splice Kit

®

Kit Contains:
Qty Description
1

Screw Splice Connectors

1

4" Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight
Adhesive Liner

Butt Splice Kit (#14 - #8 AWG)
Used for waterproof repair of well pipe cables and splices of stranded
cable #14 - #8 AWG.
• Connector set screws engage each wire for a secure splice.
• Assures safe and permanent connections.
• Rated at 600 V max.
Part #

Pkg Qty

Description

HST-WP

1 kit

Butt Splice Connector Kit

®

Kit Contains:
Qty Description

20

1

Screw Splice Connectors

1

4" Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight
Adhesive Liner

SEE PG

156

FOR MORE INFO ON

Heat Shrink
Products

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Battery Charging Clips
Designed specifically for battery and testing equipment
applications, 5 - 50 Amp.
• Available in versatile sizes.
Part #

Pkg Qty

Description

Part #

Pkg Qty

Description

14-505

4/card

5 Amp

14-530

2/card

30 Amp

14-510

4/card

10 Amp

14-550

1/card

50 Amp

14-520

2/card

20 Amp

Insulated Battery Clamps
For battery, battery charger and testing equipment applications.
• Copper-clad clamp.
• Handle grips are insulated and color-coded for easy identification.
Part #

Pkg Qty

Description

14-610

2/card (1 red & 1 black)

10 Amp Copper Clad

14-630

2/card (1 red & 1 black)

50 Amp Copper Clad

Alligator Clips

14-076

Multi-purpose alligator clips for home, auto and marine applications.
• Available with insulating sleeve.

14-078
14-077

Part #

Pkg Qty

Description

14-075

4/card

Non-Ins. #22 - #14 AWG 11⁄ 4"

14-076

4/card

Non-Ins. #22 - #14 AWG 2"

14-077

2/card

Barrel-Ins. #22 - #14 AWG 2"

14-078

2/card

Fully-Ins. #22 - #14 AWG 2"

GB Xtreme™ Primary Wire
Tinned copper wire provides maximum protection against corrosion
and electrolysis.

For Harsh
Environments

• Ultra-flexible (Type 3) stranding.
• Resists salt water, battery acid, oil, gasoline and UV radiation.
• Insulation is heat and abrasion-resistant.
• Packaged in small spools.
• Rated to 600 V and 105 °C (221 °F) maximum.
Part #

Pkg Qty

Wire Gauge Length

Part #

Pkg Qty

Wire Gauge Length

AMW-312

1/clam

12 AWG

12 FT

AMW-332

1/clam

12 AWG

12 FT

AMW-314

1/clam

14 AWG

18 FT

AMW-334

1/clam

14 AWG

18 FT

AMW-316

1/clam

16 AWG

25 FT

AMW-336

1/clam

16 AWG

25 FT

AMW-318

1/clam

18 AWG

35 FT

AMW-338

1/clam

18 AWG

35 FT

AMW-322

1/clam

12 AWG

12 FT

AMW-324

1/clam

14 AWG

18 FT

AMW-326

1/clam

16 AWG

25 FT

AMW-328

1/clam

18 AWG

35 FT

21

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

NOTES

22

SWITCHES

26

28

28

With so many reliable products to choose

29

from, Gardner Bender switches perform
wherever the contractor needs one.

30

23

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Door Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Pull-Chain Switches . . . . . . . . . . . . . . . . . . . . . .28,29
Push-Button Switches . . . . . . . . . . . . . . . . . . . .27,28
Rocker Switches . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Toggle Switches . . . . . . . . . . . . . . . . . . . . . . . . .26,27
Toggle Switch Cover . . . . . . . . . . . . . . . . . . . . . . . .27

24

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Switch Terminology
Single Pole (SP): a switch device that opens,
closes or changes connections in a single
conductor of an electrical circuit
Double Pole (DP): a switch device that opens,

Normally Open (NO): A momentary type
switch in which one or more circuits are open
when the switch actuator is at its normal
or rest position.
Normally Closed (NC): A momentary type

closes or changes connections in both
conductors of the same circuit.

Two Circuit (2 CIR): a switch device that
opens, closes or changes connections in a single
conductor of two independent circuits.
Single Throw (ST): a switch device that opens,

switch in which one or more circuits are closed
when the switch actuator is at its normal or rest
position.

Alternate Action (Double Action Push):
Push to make, then push to break, a circuit.

Power Ratings for Switches: the current

closes or completes a circuit at only one of the
extreme positions of its actuator.

handling capability of a switch measured
in amperes, horsepower, lamp load or
combinations of these with applicable voltages.

Double Throw (DT): a switch device that
opens, closes or completes a circuit at both
extreme positions of its actuator.
Actuator: A lever, push-button, slide, trigger or
other means by which an external force is
applied to operate a switch mechanism.

®

UL/CSA Rated Switches
A UL/CSA-marked rating in amperes
indicates that the switch meets or exceeds
test house performance requirements of 6000
make-and-break cycles at the rated current,
preceded by 50 make-and-break cycles at 150%
switch current rating. 125% is used when switch
ratings exceed 10 amperes.
A UL/CSA horsepower-only rated device
meets minimum test requirements of 50
make-and-break cycles at the appropriate
locked rotor current, followed by 6000 cycles
at one-sixth the AC-locked rotor current and
10% of the DC-locked rotor current.
AC ampere ratings are resistive or inductive,
with the inductive rating tested at 75% to 80%
power factor.
AC horsepower ratings are inductive and tested
at 40% to 50% power factor.

“L” Rating denotes ability of an AC-only switch
to handle the initial high in-rush characteristics of
a tungsten filament lamp on AC voltage only.

“T” Rating denotes ability of an AC/DC switch
to handle the initial high in-rush characteristics
of a tungsten filament lamp on either AC or
DC voltage.
All DC ratings are 100% resistive only
(non-inductive).
Many AC-only rated switches can be used
in applications where less than 30 volts DC is
required, provided current does not exceed full
current rating of the switch.

Ampere-rated switches will not automatically
handle in-rush characteristics of five to six times
switch rating.

25

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Toggle Switches
Versatile toggle switch family with multiple position configurations.
®

• Available in single or double pole.
• Perfect for industrial equipment or emergency lighting.
• 1⁄ 2" mounting hole required.
• Specifications: 10 A, 277 V AC / 20 A, 125 V AC

Part Number

GSW-10

GSW-11*

Poles

All switches
must be
installed with a hex
nut (provided)
behind panel to
prevent damage
during installation.

GSW-121

SPST

Pkg Qty
Toggle Position
Terminal Type
Rating

GSW-110

tip:

1/card

1/card

1/card

1/card

ON-OFF

ON-OFF

ON-OFF

ON-OFF

Screw
11⁄2 HP 125-250 V AC

Screw

"O" Ring & Screw

⁄4 HP 125-250 V AC

3

⁄4 HP 125-250 V AC

3

Spade
⁄4 HP 125-250 V AC

3

*GSW-11 has an ON-OFF faceplate.

Part Number

GSW-12

GSW-13

Poles

GSW-120

GSW-117

SPDT

Pkg Qty

1/card

1/card

1/card

1/card

Toggle Position

ON-ON

ON-OFF-ON

ON-OFF-ON

(ON)-OFF-(ON)

Terminal Type
Rating

Screw
⁄4 HP 125-250 V AC

3

Screw

Spade

⁄4 HP 125-250 V AC

3

⁄4 HP 125-250 V AC

3

Screw
⁄4 HP 125-250 V AC

3

( ) Indicates momentary action

Part Number

GSW-14

GSW-15

Poles
Pkg Qty
Toggle Position
Terminal Type
Rating

GSW-16

GSW-123

DPST
1/card

1/card

1/card

1/card

ON-OFF

ON-ON

ON-OFF-ON

(ON)-OFF-(ON)

Screw

Screw

Screw

Screw

11⁄2 HP 125-250 V AC 11⁄2 HP 125-250 V AC 11⁄2 HP 125-250 V AC 11⁄2 HP 125-250 V AC

( ) Indicates momentary action

Part Number

GSW-17*

GSW-18*

GSW-124

Poles
Pkg Qty
Toggle Position
Terminal Type
Actuator
Rating

26

GSW-125

GSW-125BP

SPST
1/card

1/card

1/card

1/card

10/box

ON-OFF

ON-OFF

ON-OFF

ON-OFF

ON-OFF
6" wire leads

Screw

6" wire leads

screw

6" wire leads

bat lever

bat lever

short ball

short ball

short ball

3 A/240 V AC,
6 A/120 V AC

8 A/125 V, 4 A/250 V,
1/3 HP/125 V AC,
10 A/125 V AC

3 A/240 V AC,
6 A/120 V AC

3 A/250 V,
6 A/125 V

3 A/250 V,
6 A/125 V

( ) Indicates momentary action

*GSW-17 & 18 have an ON-OFF faceplate.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Toggle Switch Covers
Tough EDPM rubber covers to protect switches from
moisture, dust and dirt.
• Built-in hex nut base screws onto all GB toggle switches.

Part #

Pkg Qty

Description

GSW-20

2/card

Toggle Switch Cover

Double Insulated, Plastic Toggle Switches
Double insulated for moisture protection in all environments.
®

• Internal “O” ring design for moisture and dust resistance.
• Perfect for marine/recreational equipment and weather-resistant applications.
• Specifications: 10 A, 277 V AC / 20 A, 125 V AC

Part Number

GSW-19

GSW-114

Poles

SPST

SPDT

Pkg Qty

1/card

1/card

ON-OFF

(ON)-OFF-(ON)

Screw

Spade

Toggle Position
Terminal Type

Momentary Contact Push-Button Switches
®

Basic push-button switch family utilized in applications requiring
intermittent continuity contacts.
• Normally OFF or normally ON models.
• Screw terminals.
• Mounts in standard 1⁄ 2" diameter hole.
• Mounting nut included.

Part Number

GSW-22

Poles
Pkg Qty

GSW-23
SPST

1/card

1/card

OFF (ON)

ON (OFF)

Terminal Type

screw

screw

Plating

Black

Red

Rating

6 A/120 V AC,
3 A/240 V AC

3 A/120 V AC,
1.5 A/277 V AC

Toggle Position

NOTE: GSW-22 is CSA approved only.
( ) Indicates momentary action

27

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Maintained Contact Push-Button Switch Motor Rated
®

Maintained push-button switch rugged and versatile
enough to be utilized in many applications.
• Push on, push off switch with #18 AWG, 6" stripped wire leads.
• Mounting nut included.
Part #

Pkg Qty

Poles

Toggle Position

GSW-21

1/card

SPST

Push ON-Push OFF Wire Leads

Terminal Type

Rated
10 A/125 V AC, 8 A/125 V,
4 A/250 V, 1/3 HP 125 V AC

Maintained Contact Push-Button Switches
Double insulated for moisture protection in all environments.
®

• Internal “O” ring design for moisture and dust resistance.
• Perfect for marine/recreational equipment and
weather-resistant applications.

tip:

Horsepower Rating:
AC horsepower ratings
are inductive and tested at 40%
to 50% power rating.

• Specifications: 10 A, 277 V AC / 20 A, 125 V AC

Part Number

GSW-24

Poles

GSW-24BP

GSW-25

SPST

Pkg Qty
Toggle Position
Terminal Type

1/card

10/box

1/card

ON-OFF

ON-OFF

ON-OFF
6" wire leads

6" wire leads

6" wire leads

Plating

Nickel

Nickel

Brass

Circuit

2 pos. 2 wire

2 pos. 2 wire

2 pos. 2 wire

Single Circuit Pull-Chain Switches

tip:

“L” Rating Example:
3A/125VL means the
switch is rated to handle the
high in-rush from 3 amp
incandescent AC loads.

Basic ON-OFF switch family with pull-chain feature.
®

• ON-OFF switch with #18 AWG, 6" stripped wire leads.
• Mounts in 13 ⁄3 2 " diameter hole (GSW-35 mounts in
1
⁄2" diameter hole).
• Color coordinated nickel or brass plated.
• Specifications: 3 A/125 VL, 6 A/125 V AC, 3 A/250 V AC

Part Number

GSW-31

GSW-31BP

Poles
Pkg Qty
Toggle Position
Terminal Type

28

GSW-32

GSW-32BP

GSW-35*

SPST
1/card

10/box

1/card

10/box

1/card

ON-OFF

ON-OFF

ON-OFF

ON-OFF

ON-OFF
wire leads

6" wire leads

6" wire leads

6" wire leads

6" wire leads

Plating

Nickel

Nickel

Brass

Brass

Nickel

Circuit

2 Pos. 2 Wire

2 Pos. 2 Wire

2 Pos. 2 Wire

2 Pos. 2 Wire

2 Pos. 2 Wire

*All angle

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Variable Speed & Two Circuit Pull-Chain Switches
Pull chain switches for multifunction applications.
®

• Two and three speed switching.
• Push-in connections for #18 AWG wire.
• Mounts in 13⁄32" diameter hole.
• Specifications: 6 A/125 V AC, 3 A/250 V AC, 6 A/125 VL

Part Number

GSW-33

GSW-34

Poles

GSW-39

SPST

Pkg Qty
Toggle Position
Terminal Type

1/card

10/box

1/card

OFF-ON-ON

OFF-ON-ON-ON

OFF-ON(A)-ON(B)
-ON(A+B)
6" wire leads

wire leads

wire leads

Plating

Brass

Brass

Brass

Circuit

3 Pos. 3 Wire

4 Pos. 4 Wire

4 Pos. 3 Wire

Standard Rocker Switches
®

Appliance Rocker Switches

Heavy-duty rocker switches that fit .830" X
1.45" panel cutouts.

®

• Frame and rocker are black glass-filled nylon.

Economy rocker switches that fit standard
.550" X 1.125" panel cutouts.
• Perfect for machinery or appliances.

• Lighted or unlighted versions available.

• Lighted or unlighted versions available.
®

• Specifications: 10 A/277 V AC,
20 A/125 V AC

• Specifications: 16 A/125 V AC,
8 A/250 V AC

• Switches with solder terminals come
in a phenolic case and do not have
a moisture and dust resistant seal.

Part Number

GSW-45

Poles

GSW-49*

Part Number

SPST

Pkg Qty
Toggle Position

1/card

1/card

ON-OFF

ON-OFF

spade

spade

Terminal Type

Toggle Position
Terminal Type

3

GSW-42*
SPST

Pkg Qty

⁄4 HP 125 - 250 V AC 3⁄4 HP 125 - 250 V AC

Rating

GSW-41

Poles
1/card

1/card

ON-OFF

ON-OFF

spade

spade

*Red lighted

*Red lighted

Mini Rocker Switch
Miniature rocker switch that fits .520" X .776" panel cutouts.
®

• Perfect for small machinery or appliances.
• Lighted or unlighted versions available.
• Specifications: 13 A/125 V AC, 10 A/250 V AC, 1⁄2 HP 125 - 250 V AC.
Part #

Pkg Qty

Poles

Toggle Position

Terminal Type

Rated

GSW-48*

1/card

SPST

ON-OFF

spade

10 A/125 - 250 V AC,
1
⁄2 HP 250 V AC, 1⁄3 HP 125 V AC

*Red lighted

29

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Rotary Switches
Single or three position switches in various fan and lighting applications.
®

• #18 AWG, 6" stripped wire leads.
• Brass terminals.

Part Number

GSW-61

GSW-63B

Poles
Pkg Qty
Toggle Position
Plating / Color
Rating
Mounting Hole

GSW-69

GSW-69BP

GSW-62

SPST

GSW-68
SPDT

1/card

1/card

1/card

10/box

1/card

1/card

ON-OFF

ON-OFF

ON-OFF

ON-OFF

OFF-ON(P)-ON(N)
-ON(N+P)

OFF-ON(P)-ON(N)
-ON(N+P)

Brass

Black Button

Black Plastic

Black Plastic

Brass

Brass

6 A/125 V AC,
3 A/250 V AC

1.5 A/250 V AC

6 A/125 V AC,
3 A/250 V AC

6 A/125 V AC,
3 A/250 V AC

6 A/125 V AC,
3 A/250 V AC

6 A/125 V AC,
3 A/250 V AC

.406"

.513"

.513"

.513"

.406"

.513"

Door Switch
Push button switch with metal box, cover plate and mounting hardware
to operate lights when door is opened.
• Mounts in door jam.
• Fits in 1.25" X 2.75" X 2.0" deep approximate mounting hole.
• Specifications: 10 A/125 V AC, 10 A/250 V AC, 10 A/277 V AC, 1⁄2 HP 125 - 277 V AC.

Part Number

GSW-SK

Poles
Pkg Qty
Toggle Position
Description

30

GSW-26
SPST

1/card

1/card

Normally ON
-Mom Contact

Normally ON
-Mom Contact

AC/DC Door Switch

Replacement
for GSW-SK

CONDUIT BENDING

34

38

52

Gardner Bender’s innovations have
delivered the ultimate in job-site
performance, durability and reliability

56

since 1959. Gardner Bender provides a
complete line of products to bend
1/4" – 4" EMT, Rigid, IMC and PVC
coated conduit.
60

31

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Guide to Bending Booklet . . . . . . . . . . . . . . .62

One-Shot Hydraulic Benders . . . . . . . .40-46

Benders – Aluminum Rigid Conduit

Sidewinder® Electric Bender (B2555) . . . .35

Cyclone™ Electric Bender (B2000) . . . . . .34

Sidewinder® Mechanical Benders . . . .52-55

Gardner® EMT Hand Benders . . . . . . . . . .57

Sweep/Segmental Hydraulic Benders . .44, 46

One-Shot Hydraulic Benders . . . . . . . .40-46

Ultra Eegor™ Hydraulic Bender . . . . . . . .38

Sidewinder® Electric Bender (B2555) . . . .35
Sidewinder® Mechanical Benders . . . .52-55
Sweep/Segmental Benders . . . . . . . . .44, 46
Ultra Eegor™ Hydraulic Bender . . . . . . . .38
Benders – EMT Conduit
Big Ben™ Hand Benders . . . . . . . . . . . . . .56
Cyclone™ Electric Bender (B2000) . . . . . .34
Gardner® EMT Hand Benders . . . . . . . . . .57
Iron Hand Benders . . . . . . . . . . . . . . . . . .58
Sidewinder® Electric Bender (B2555) . . . .35

Sidewinder® Electric Bender
(B2555) - IMC . . . . . . . . . . . . . . . . . .36
Sidewinder® Electric Bender
(B2555) - Rigid . . . . . . . . . . . . . . . . .35
Sidewinder® Electric Bender
(B2555) - EMT . . . . . . . . . . . . . . . . . .36
Sidewinder® Electric Bender
(B2555) - PVC-Coated . . . . . . . . . . . . .36
Hand Benders

Sidewinder® Mechanical Benders . . . .52-55

Big Ben™ Hand Benders . . . . . . . . . . . . . .56

Ultra Eegor™ Hydraulic Bender . . . . . . . .38

Gardner® Thinwall Hand Benders . . . . . . .57

Benders – IMC Conduit

Iron Hand Benders . . . . . . . . . . . . . . . . . .58

Cyclone™ Electric Bender (B2000) . . . . . .34

Handles . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Sidewinder® Electric Bender (B2555) . . . .35

Hickey Bending Heads . . . . . . . . . . . . . . .59

Sidewinder® Mechanical Benders . . . .52-55

Hydraulic Bender Accessories . . . . . . . . . . .50

Ultra Eegor™ Hydraulic Bender . . . . . . . .38

Hydraulic Cylinder Specifications . . . . . . . . .51

Benders – PVC Conduit
HotBlanket™ Benders . . . . . . . . . . . . . . . .61

PVC Plug Sets . . . . . . . . . . . . . . . . . . . . . . .61
Pumps

HotBox™ Benders . . . . . . . . . . . . . . . .60-61

Economy Electric . . . . . . . . . . . . . . . . . . .48

HotTube™ Bender . . . . . . . . . . . . . . . . . . .59

Manual Hydraulic . . . . . . . . . . . . . . . . . . .49

Benders – PVC-Coated Rigid Conduit
Cyclone™ Electric Bender (B2000) . . . . . .34
Sidewinder® Electric Bender (B2555) . . . .35
Sidewinder® Mechanical Benders . .52, 54-55
Benders – Rigid Steel Conduit
Rigid Bender Capacities Chart . . . . . . . . .37
Big Ben™ Hand Benders . . . . . . . . . . . . . .56
Cyclone™ Electric Bender (B2000) . . . . . .34
Gardner® EMT Hand Benders . . . . . . . . . .57

32

Bender Shoe Groups

Iron Hand Benders . . . . . . . . . . . . . . . . . .58

Submerged Electric . . . . . . . . . . . . . . . . . .48
Z-Class Electric . . . . . . . . . . . . . . . . . . . . .47
Table (Bend-Mate™ Bender
Table for Ultra Eegor™) . . . . . . . . . . . .39
Storage Cases (Tool Guard) . . . . . . . . . . . . .62

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Bending Selection Guide
Part # & Description
Combination Bending-Rigid, IMC, EMT Conduit

Page #

B2000 Cyclone™ Bender

34

B2555 Sidewinder® Bender & BRIG-52

35

B2555 Sidewinder® Bender & BEMT-52

35

B2555 Sidewinder® Bender & IMC-52

35

B2555 Sidewinder® Bender & BPVC-152

35

B400L & DL Ultra Eegor™

38
®

54-55

®

BW Series - Mechanical Sidewinder Bender (IMC)

53-55

BW Series - Mechanical Sidewinder® Bender (Rigid)

53-55

BW Series - Mechanical Sidewinder Bender (EMT)

Rigid Conduit Bending

Page #

B2000 Cyclone™ Bender

34

B2555 Sidewinder® Bender & BRIG-52

35

B400L & DL Ultra Eegor™

38

B316S One-Shot Bender

40

B308S Combination One-Shot/Sweep Bender

41

B340S One-Shot Bender

42

B359S Combination One-Shot/Sweep Bender

43

B306S Sweep/Segmental Bender

44

B343S One-Shot Eject-O-Matic Bender

45

B351S Combination Eject-O-Matic Bender

46

®

Mechanical Sidewinder Bender BW11,12,15, 20,30, 27

52-55

1

⁄2"







3

⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4"
















1

⁄2"




























Hand Benders - Big Ben™

56

961 962

Hand Benders - Malleable Iron

58

921 922 923

Hand Benders - Hickeys

59

820 821 822

EMT Conduit Bending

Page #

35

B400L & DL Ultra Eegor™
Mechanical Sidewinder® Bender BW30, 27, 201, 221

1

⁄2"







































960 961 962

Hand Benders - Malleable Iron

58

920 921 922 923

®

Mechanical Sidewinder Bender BW11,12,15, 20,30, 27
PVC-Coated Rigid Conduit Bending
B2000 Cyclone™ Bender
B2555 Sidewinder® Bender & BPVC-152
®

Mechanical Sidewinder Bender BW30,27,201, 221

34
35-36

1

⁄2"

52-55

34
35-36
52-55






































⁄2"

































5"

5"





⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4"










3









⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4"


1



3

38

Page #




930B 931B 932

B400L & DL Ultra Eegor™












57

B2555 Sidewinder® Bender & IMC-52










5"







56

B2000 Cyclone™ Bender




⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4"

Hand Benders - Big Ben™

Page #





38
52-55



3

Hand Benders - Gardner® Bender

IMC Conduit Bending







⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4"

931B 932 933

34







3

57

B2555 Sidewinder® Bender & BEMT-52









Hand Benders - Gardner® Bender

B2000 Cyclone™ Bender







5"





5"



33

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Cyclone™
Electric-Powered Jobsite Bender
One shoe bends 1⁄2 " - 2" conduit with no loose parts:
• Rigid

• Rigid aluminum

• EMT

• IMC

• PVC-coated rigid (1⁄2 " to 11⁄2 ")
• Ability to make repeatable bends at the same degree.
• Horizontal and vertical positions allow the
unit to create accurate offset bends.
• Four-wheels increases mobility.
• Low-volt (95), high-volt (132) automatic shut-off
helps protect electrical components from
voltage fluctuations.
• Resetting circuit breaker eliminates down time
changing fuses.
• On/Off switch allows user to shut machine down
for extended periods of time.

B2000

• Hook attachment on pendant control frees
hands while working with conduit.
• Minimal training time.
• Weather-resistant cover included.
• 110/115 V AC, 15 AMP 1 HP DC Motor.
• Dimensions: 47" x 33" x 43".
• Weight 408 lbs.

New Features:
1. NEW STRONGER LEGS
Increased durability (10x life test)
2. LARGER TIRES/WHEELS
Increased mobility
3. STRONGER UPRIGHT HANDLE
Ease of use

4. FORK LIFT TUBES
Allows lifting and transport
capability–built into base
5. LIFT HOOK
Security (job-site) tethering

Can be performed in the horizontal
or vertical position.

6. STORAGE AREA
Storage for tools, etc.
while in use

Part #

Description

Weight

B2000

Cyclone® Electric-Powered Production Bender, 115 V / 15 A

408 lbs

Centerline Radius Chart:

34

Conduit
Size

IMC

PVC-Coated
Rigid

EMT

1⁄ 2"

43⁄ 8"

53⁄ 8"

41⁄ 4"

43⁄ 8"

3⁄ 4"

55⁄ 16"

61⁄ 2"

53⁄ 8"

55⁄ 16"

1"

67⁄ 32"

727⁄ 32"

61⁄ 2"

67⁄ 32"

11⁄ 4"

723⁄ 32"

83⁄ 8"

727⁄ 32"

723⁄ 32"

Rigid

11⁄ 2"

87⁄ 32"

N/A

83⁄ 8"

815⁄ 64"

2"

915⁄ 32"

N/A

921⁄ 32"

929⁄ 64"

Easy dial settings-makes training
time virtually non-existent.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Electric Sidewinder® Bender
Bends 1⁄2" to 2" conduit:
• Rigid

• Rigid aluminum (schedule 40 max.)

• IMC

• EMT conduit

• PVC-coated rigid (40 mil)
• Up to 180 degree one-shot bends in 1⁄2" through 2" conduit.
• The handle detaches and pivots out of the way
for offset bending.
• Competitor shoes are interchangeable
(Greenlee, Current, etc.).
• 110/115 V AC
• 20 AMP

Centerline Radius Chart:
Conduit
Size

EMT

IMC

Rigid

1

41⁄ 4"

43⁄ 8"

43⁄ 8"

3

⁄ 4"

53⁄ 8"

41⁄ 2"

41⁄ 2"

1"

63⁄ 4"

53⁄ 4"

53⁄ 4"

⁄ 2"

11⁄ 4"

83⁄ 4"

71⁄ 4"

71⁄ 4"

11⁄ 2"

89⁄ 32"

89⁄ 32"

81⁄ 4"

2"

99⁄ 16"

99⁄ 16"

91⁄ 2"

B2555

note:

Part #

Description

Capacity/Range

Weight

B2555

Electric Sidewinder® w/o Shoes

—

270 lbs

B2555RIG Electric Sidewinder® w/ Rigid Shoe Group

⁄2"-2" Rigid & 1⁄2"-11⁄4" IMC conduit

365 lbs

1

⁄2" - 2" EMT conduit

430 lbs

B2555IMC Electric Sidewinder® w/ IMC Shoe Group

11⁄2" - 2" IMC conduit

410 lbs

B2555PVC Electric Sidewinder® w/ PVC Shoe Group

1

B2555EMT Electric

Sidewinder®

w/ EMT Shoe Group

1

Bender & Shoe
Groups can
be purchased as a kit
or individually.

⁄2" - 2" 40 mil PVC-Coated conduit 365 lbs

Electric Sidewinder™ Shoe Groups
Rigid Shoe Group (1⁄2 " to 2")
BRIG-52
Part #

Conduit

RS-5125

1⁄ 2"

RSR-5125

1

RS-152

11⁄ 2" & 2"

RSR-152
BX-1

Description

Weight I.D. #

& 11⁄ 4" Rigid and IMC Bending Shoe

43 lbs

⁄ 2" & 11⁄ 4" Rigid and IMC Support Roller

1

8 lbs

2

Rigid Bending Shoe

36 lbs

3

11⁄ 2" & 2"

Rigid Support Roller

6 lbs

4

—

Metal Storage Box

36 lbs

—

129 lbs
1

2

3

4

More Shoe Sets available on following page...

35

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Electric Sidewinder™ Shoe Groups (cont.)
EMT Shoe Group (1⁄2 " to 2")
BEMT-52
Part #

Conduit

ES-5125

1

Description

Weight I.D. #
24 lbs

1

ESR-5125

1

6 lbs

2

ES15

11⁄ 2"

EMT Bending Shoe

23 lbs

3

ES-2

2"

EMT Bending Shoe

31 lbs

4

ESR-152

11⁄ 2" & 2"

EMT Support Roller Unit

40 lbs

5

BX-1

—

Metal Storage Box

36 lbs

—

⁄ 2" & 11⁄ 4" EMT Bending Shoe
⁄ 2" & 11⁄ 4" EMT Support Unit

Total Weight: 160 lbs
1

2

3

4

IMC Shoe Group (11⁄2 " to 2")
BIMC-152
Part #

Conduit

Description

Weight I.D. #

IS-15

11⁄ 2"

IMC Bending Shoe

22 lbs

1

IS-2

2"

IMC Bending Shoe

29 lbs

2

ISR-152

11⁄ 2" & 2"

IMC Support Roller Unit

40 lbs

3

BX-1

—

Metal Storage Box

36 lbs

—

Total Weight: 127 lbs
1

2

3

PVC-Coated Rigid Shoe Group (1⁄2 " to 2" or 40 mil)
BPVC-52
Part #

Conduit

PVS-5125

1

Description

Weight I.D. #
43 lbs

PVR-5125

1

8 lbs

2

PVS-152

11⁄ 2" & 2"

PVC-Coated Rigid Bending Shoe

36 lbs

3

PVR-152

11⁄ 2" & 2"

PVC-Coated Rigid Support Roller

6 lbs

4

BX-1

—

Metal Storage Box

36 lbs

—

⁄ 2" & 11⁄ 4" PVC-Coated Rigid Bending Shoe
⁄ 2" & 11⁄ 4" PVC-Coated Rigid Support Roller

1

Total Weight: 132 lbs
1

36

2

3

4

5

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Rigid Bender Capacities Chart
One Shot / Sweep / Segmental
This chart is meant as a guide for bending capabilities only.
For those instances where doubt exists, a trial bend is recommended.
Part #
Pipe
Size

Outside
Dia.

Wall
Thick.

Sched.
Pipe*

1⁄ 2"

.840"

.108"

40

.147"

80




.187"

160

WS

.294"

DEH

WS

.113"

40

3

⁄ 4"

1"

1.050"

1.315"

11⁄ 4" 1.660"

11⁄ 2" 1.900"

2"

2.375"

21⁄ 2" 2.875"

3"

3.500"

31⁄ 2" 4.000"
4"
5"

4.500"
5.563"

B316S

B306S
B340S
B343S

B351S
B359S

WS

WS

WS

WS

WS

WS

WS

WS

WS

WS

WS

WS

B308S






*Schedule Pipe:
40 = Standard
80 = Extra Duty
160 = Double Extra Duty
DEH = Double Extra Heavy
(slightly thicker than 160)

.154"

80




WS

WS

.218"

160

WS

WS

WS

WS

.308"

DEH

WS

WS

WS

NR = Not Recommended

.133"

40

WS

WS

.179"

80




WS

WS

WS

WS = Can be bent using wider
spacing for swivel shoes

.250"

160

WS

WS

WS

WS

.358"

DEH

NR

WS

40

.191"

80

.250"

160

WS

WS





WS

.140"




WS

.342"

DEH

NR

WS

40

.200"

80

.281"

160

WS

WS





WS

.145"




WS

.400"

DEH

NR

WS

40

.218"

80

NR




WS

.154"



WS

.343"

160

NR

WS

.203"

40

NR



.276"

80

NR

WS

.375"

160

NR

WS

.216"

40

NR



.300"

80

NR

WS








.237"

40

NR



.337"

80

NR

NR














.258"

40

NR

NR

NR

.375"

80

NR

NR

NR

.226"

40

NR



.318"

80

NR

WS

Other:























37

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Ultra Eegor™ Hydraulic Bender
1

Bends 2 ⁄ 2" to 4" conduit:
• Rigid

• Rigid aluminum (schedule 40 max)

• EMT

• IMC

No additional attachment sets required to change per pipe or conduit type.
• 30 ton, 28" stroke cylinder can make a 90° bend with one pass.
• Double-acting cylinder for rapid retraction, regardless of hose lengths and system losses.
• Improved shoes and follow bars to reduce
conduit kinking during bending.

17

B400L
16

19

• Hydraulic power ensures the smoothest
bends without deformations to the conduit.
• Constant radii follow bars eliminate the
need for special calculations.

4

CS400
Z-Class
Electric Pump
(P. 47)

• Conduit is automatically stripped
free from the shoe during the return
cycle-which ensures no extra
labor or damaged conduit.

BE400
Optional

• Angle markings on frame ensure
easy and accurate bending.

3
2
1
11
12

10

15

18

Centerline Radius Chart:

9

18

Nominal
Size

IMC

EMT

21⁄ 2"

131⁄ 2"

131⁄ 2"

131⁄ 2"

3"

157⁄ 8"

157⁄ 8"

157⁄ 8"

31⁄ 2"

181⁄ 2"

181⁄ 2"

181⁄ 2"

4"

21"

21"

21"

5

7

6

8

Rigid

B400L with BE400 Table, CS400Cylinder
Support & Z-Class Pump

SEE PG
Part #

Description

Pump

Weight

B400L

Long-stroke Ultra Eegor™

—

770 lbs

B400LP408S

Long-stroke Ultra Eegor™

P408S Electric

870 lbs

B400DL

Long-stroke Ultra Eegor™ w/o 31⁄2" shoe group —

770 lbs

B400DLP408S Long-stroke Ultra Eegor™ w/o 31⁄2" shoe group P408S Electric

47

Eegor™ Conversion Kit, 28" Stroke Cylinder

105 lbs

CS400

Cylinder Support for BE400 Table

30 lbs

DC404

Bend Angle Decal

1 lb

Electric Pumps

tip:

795 lbs

CD3028KT*

FOR MORE INFO ON

*To convert older B400
or B400D to Long-stroke
Cylinder, use CD3028KT Kit,
which includes Long-stroke
Cylinder, CS400 Cylinder Support
and DC404 Decal.

Components Included with the Long-stroke Ultra Eegor™ Bender
Part #

38

Conduit Description

Weight I.D. # Part #

Conduit Description

Weight I.D. #

BS2500 21⁄ 2"

Bending Shoe

44 lbs

1

BZ34

3"

U-strap

5 lbs

10

BS3000

3"

Bending Shoe

50 lbs

2

BZ39*

31⁄ 2"

U-strap

8 lbs

11

BS3500

31⁄ 2"

Bending Shoe

75 lbs

3

BZ44

4"

U-strap

10 lbs

12

BS4000

4"

Bending Shoe

90 lbs

4

BZ78

-

Bend Shoe Pin

4 lbs

16

BFB2500 21⁄ 2"

Follow Bar

34 lbs

5

CD3028 -

30-Ton, Double-Acting Hyd. Cyl.

95 lbs

17

BFB3000 3"

Follow Bar

35 lbs

6

HC927

-

(2) 10' Hose w/High-Flow Coupler 4 lbs

18

BFB3500 31⁄ 2"

Follow Bar

42 lbs

7

BZ74

-

Double Anchor Frame Pin

66 lbs

19

BFB4000 4"

Follow Bar

40 lbs

8

CM20

-

Metal Case for Ultra Eegor™

182 lbs

-

U-strap

5 lbs

9

BZ28

21⁄ 2"

*These parts are not included with B400DL and B400DLP408S.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Replacement Components for Eegor™ Roller Assembly BZ72:
Part #

# Req'd Description

I.D. #

CK211950

1

Plate assembly (top)

1

CK212950

1

Plate assembly (bottom)

2

CF859489

1

Retaining collar

3

CF860013

1

Pilot keyway

4

CH204028

4

Button head cap screw

5

CF862281

2

Roller (short)

6

CF861108

2

Roller insert (short)

7

CK579281

1

Roller

8

CF863104

1

Roller axle

9

CM191044

1

Retaining ring

10

CM194900

1

Roller assembly

11

CM193350

1

Roller cam

12

B1021028

1

Roller cam cap screw

13

CH819044

AR

Wire, retaining

14

CH951044

1

Ring, retaining

15

1

15

7

8

5

6

5

3
13

9
6

14

12

7
4
11
2
10

5

BZ725 Top Plate Assembly

5
BZ726 Bottom Plate Assembly

Bend-Mate™ Bender Table (Optional)
Rugged table for Eegor™ hydraulic conduit benders allows
one to work more comfortably and accurately.
• Hydraulic pivot jack adjusts table to horizontal or vertical
positions for easy access.
• Rugged one-piece steel frame with 1⁄ 4" steel plate tabletop.
• Wheels and lift-handles included for easy movement.
• Two ton jack force.
Part #

Description

BE400

Bend-Mate™ Table - 30"W* x 32"L x 56"H w/6" wheels 210 lbs

Weight

CS400

Cylinder Support for BE400 Table

BE400

30 lbs

*57" with table raised.

tip:

Using BE400 table with an Eegor™
Hydraulic Bender will help reduce
labor costs, and physical strain.

tip:

When ordering the
optional BE400 Table
for use with the Ultra Eegor™,
you must order the CS400
Cylinder Support.

39

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

⁄2" - 2" One-shot Rigid Hydraulic Benders

1

Gardner Bender’s Rigid Benders are made with high-grade aluminum for
durability, and interchangeable shoes that allow quick and precise bends.
• Bends 1⁄ 2" to 2" rigid steel or rigid aluminum conduit.

benders are for use on
note: These
Rigid conduit only.

• Portable hand pump or economical electric pump options.
• Durable metal job box included.
• Optic angle gauge for quick references of bend progression.
• Ability to be powered by manual or electric pumps.

7
14

B316S
11

8

8

9

10
2

10
4

13

6

3
1
12

5

Part #

Description

Weight

B316S

1

104 lbs

SEE PG

B316SPH39

1

114 lbs

B316SPE22J

1

160 lbs

47

⁄ 2" - 2" One-shot Rigid Bender
⁄ 2" - 2" One-shot Rigid Bender w/ PH39 Hand Pump
⁄ 2" - 2" One-shot Rigid Bender w/ PE22J Electric Pump

SEE PG

Centerline Radius Chart:
Nominal
Size

49

Rigid
Radius

Bending
Shoe

Nominal
Size

Rigid
Radius

Bending
Shoe

1

⁄ 2"

35⁄ 16"

BZ12011

11⁄ 4"

71⁄ 4"

BZ12041

3⁄ 4"

41⁄ 2"

BZ12021

1

1 ⁄ 2"

81⁄ 4"

BZ12051

SEE PG

1"

513⁄ 16"

BZ12031

2"

91⁄ 2"

BZ12061

51

FOR MORE INFO ON

Electric Pumps

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B316S Models:
Part #

Conduit Description

Conduit Description

Weight I.D. #

Bending Shoe

1 lb

1

BZ12071 -

(2) Pivot Shoes

1 lb

BZ12021 3⁄ 4"

Bending Shoe

1 lb

2

BZ12091 -

Angle Gauge

.5 lb

9

BZ12031 1"

Bending Shoe

2 lbs

3

BZ12375 -

(2) Pivot Pins

1 lb

10

BZ12041 11⁄ 4"

Bending Shoe

4 lbs

4

BZ12371 -

Bender Frame

25 lbs

11

BZ12051 11⁄ 2"

Bending Shoe

5 lbs

5

BZ12377 -

Shoe Lock Pin

.25 lb

12

BZ12061 2"

Bending Shoe

7 lbs

6

HC913

-

6' Hose

3 lbs

13

CS1010 -

10-ton Single-Acting Cylinder*

13 lbs

7

CM4

-

Metal Case

56 lbs

14

*Must order A12 Smooth Saddle, see p. 51

40

Weight I.D. # Part #

BZ12011 1⁄ 2"

8

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

1" - 2" Combination One-shot / Sweep Rigid Hydraulic Benders
Bends 1" to 2" rigid steel or aluminum conduit in one shot. Includes 21⁄ 2"
to 4" sweep bend shoes.
• Capability of one-shoe bending for elbows.
• Ability to produce sweep bends where several bending
stages are necessary.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.

9

16

B308S
13
10
10
12

12

6
2

11

8
15

1

4

7

14

3

5

Part #

Description

B308S

1" - 2" One-shot / 21⁄ 2" - 4" Sweep Combination

Weight
225 lbs

SEE PG

B308SPH80

1" - 2" One-shot / 21⁄ 2" - 4" Sweep Combo w/ PH80 Hand Pump

253 lbs

47

B308SPE22J

1" - 2" One-shot / 21⁄ 2" - 4" Sweep Combo w/ PE22J Elec. Pump 340 lbs

SEE PG

Centerline Radius Chart:
Nominal
Size

Rigid
Radius

Bending
Shoe

Nominal
Size

Rigid
Radius

1"

49

Bending
Shoe

513⁄ 16"

BZ12031

21⁄ 2"

101⁄ 2"

BZ12341

1⁄ 4"

1

71⁄ 4"

BZ12041

3"

13"

BZ12351

SEE PG

11⁄ 2"

81⁄ 4"

BZ12051

31⁄ 2"

171⁄ 2"

BZ12391

2"

91⁄ 2"

BZ12061

4"

20"

BZ12392

51

FOR MORE INFO ON

Electric Pumps

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B308S Models:
Part #

Conduit Description

Weight I.D. # Part #

Conduit Description

Weight I.D. #

BZ12031 1"

Bending Shoe

2 lbs

1

CS2510 -

25-ton Single-Acting Cylinder*

31 lbs

9

BZ12041 11⁄ 4"

Bending Shoe

4 lbs

2

BZ13401 -

(2) Pivot Shoes

4 lbs

10

BZ12051 11⁄ 2"

Bending Shoe

5 lbs

3

BZ12091 -

Angle Gauge

.5 lb

11

BZ12061 2"

Bending Shoe

7 lbs

4

BZ12376 -

(2) Pivot Pins

4 lbs

12

BZ12382 21⁄ 2"

Sweep Bending Shoe

4 lbs

5

BZ12372 -

Bender Frame

54 lbs

13

BZ12383 3"

Sweep Bending Shoe

5 lbs

6

BZ12377 -

Shoe Lock Pin

.25 lb

14

BZ12384 31⁄ 2"

Sweep Bending Shoe

9 lbs

7

HC913

-

6' Hose

3 lbs

15

BZ12385 4"

Sweep Bending Shoe

12 lbs

8

CM7

-

Metal Case

98 lbs

16

*Must order A29 Smooth Saddle, see p. 51

41

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

11⁄4" - 4" One-shot Rigid Hydraulic Benders
Bends 11⁄ 4" to 4" rigid steel or rigid aluminum conduit.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.

8

B340S

15
12
9

11

9

5

11

14

10
4
7

3
2
13

6

1

Part #

Description

Weight

B340S

11⁄ 4" - 4" One-shot Rigid Bender

334 lbs

B340SPH80

11⁄ 4" - 4" One-shot Rigid Bender w/ PH80 Hand Pump

350 lbs

1

B340SPE22J

1 ⁄ 4" - 4" One-shot Rigid Bender w/ PE22J Electric Pump

390 lbs

B340SP208J

11⁄ 4" - 4" One-shot Rigid Bender w/ P208J Electric Pump

325 lbs

Nominal
Size

Rigid
Radius

Bending
Shoe

11⁄ 4"

71⁄ 4"

BZ12041

3"

13"

BZ12351

11⁄ 2"

81⁄ 4"

BZ12051

31⁄ 2"

171⁄ 2"

BZ12391

2"

1

9 ⁄ 2"

BZ12061

4"

20"

BZ12392

1

1

BZ12341

10 ⁄ 2"

47
SEE PG

Centerline Radius Chart:

2 ⁄ 2"

SEE PG

Nominal
Size

Rigid
Radius

49

Bending
Shoe

SEE PG

51

FOR MORE INFO ON

Electric Pumps

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B340S Models:
Part #

Conduit Description

Conduit Description

Weight I.D. #

Bending Shoe

4 lbs

1

BZ13401 -

(2) Pivot Shoes

4 lbs

9

BZ12051 11⁄ 2"

Bending Shoe

5 lbs

2

BZ12091 -

Angle Gauge

.5 lb

10

BZ12061 2"

Bending Shoe

7 lbs

3

BZ12376 -

(2) Pivot Pins

4 lbs

11

BZ12341 21⁄ 2"

Bending Shoe

15 lbs

4

BZ12374 -

Bender Frame

63 lbs

12

BZ12351 3"

Bending Shoe

15 lbs

5

BZ12377 -

Shoe Lock Pin

.25 lb

13

BZ12391 31⁄ 2"

Bending Shoe

40 lbs

6

HC913

-

6' Hose

3 lbs

14

BZ12392 4"

Bending Shoe

41 lbs

7

CM7

-

Metal Case

98 lbs

15

CS2514 -

25-ton Single-Acting Cylinder*

31 lbs

8

B350

-

5" Conversion Kit (optional)

63 lbs

-

*Must order A29 Smooth Saddle, see p. 51

42

Weight I.D. # Part #

BZ12041 11⁄ 4"

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

11⁄4" - 4" One-shot Sweep Combination Rigid Hydraulic Benders
Bends 11⁄ 4" to 4" rigid steel or rigid aluminum conduit.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.

9
16

B359S
13
10

12

10

5
4

12

15

11
3

14
7

1

6

2

Part #

Description

B359S

11⁄ 4" - 4" One-shot / 5" Sweep Combination

225 lbs

B359SPH80

11⁄ 4" - 4" One-shot / 5" Sweep Combo w/ PH80 Hand Pump

253 lbs

B359SP208J

Weight

1

1 ⁄ 4" - 4" One-shot / 5" Sweep Combo w/ P208J Elec. Pump

47
SEE PG

Nominal
Size

Rigid
Radius

Bending
Shoe

11⁄ 4"

71⁄ 4"

BZ12041

3"

13"

BZ12351

11⁄ 2"

81⁄ 4"

BZ12051

31⁄ 2"

171⁄ 2"

BZ12391

2"

1

9 ⁄ 2"

BZ12061

4"

20"

BZ12392

1

1

BZ12341

10 ⁄ 2"

SEE PG

340 lbs

Centerline Radius Chart:

2 ⁄ 2"

8

Nominal
Size

Rigid
Radius

49

Bending
Shoe

SEE PG

51

FOR MORE INFO ON

Electric Pumps

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B359S Models:
Part #

Conduit Description

Weight I.D. # Part #

Conduit Description

Weight I.D. #

BZ12041 11⁄ 4"

Bending Shoe

4 lbs

1

CS2514* -

25 ton Single Acting Cylinder

31 lbs

9

BZ12051 11⁄ 2"

Bending Shoe

5 lbs

2

BZ12388 -

(2) Pivot Shoes

4 lbs

10

BZ12061 2"

Bending Shoe

7 lbs

3

BZ12091 -

Angle Gauge

.25 lb

11

BZ12341 21⁄ 2"

Bending Shoe

14 lbs

4

BZ12390 -

(2) Pivot Pins

4 lbs

12

BZ12351 3"

Bending Shoe

15 lbs

5

BZ12389 -

Bender Frame

85 lbs

13

BZ12391 31⁄ 2"

Bending Shoe

40 lbs

6

BZ12377 -

Shoe Lock Pin

.25 lb

14

BZ12392 4"

Bending Shoe

41 lbs

7

HC913

-

6' Hose

3 lbs

15

BZ12386 5"

Sweep Bending Shoe

18 lbs

8

CM7

-

Metal Case

98 lbs

16

*Must order A29 Smooth Saddle, see p. 50

43

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

11⁄4" - 4" Sweep/Segmental Rigid Hydraulic Benders
Bends 11⁄ 4" to 4" rigid steel or rigid aluminum conduit sweep/segmental.
• Choice of hand or electric pumps.
• Durable metal job box included.

tip:

For a quick reference
guide, order GB part
#E507 at no charge.

• Ability to be powered by manual or electric pumps.

8

B306S

14

11
9

9
10
10

3
5
2
13
4

7

1
6

12

Part #

Description

Weight

B306S

11⁄ 4" - 4" Sweep

216 lbs

B306SPH80

11⁄ 4" - 4" Sweep w/ PH80 Hand Pump

243 lbs

B306SPE22J

1

1 ⁄ 4" - 4" Sweep w/ PE22J Electric Pump

SEE PG

Nominal
Size

Smallest
Radius

Bending
Shoe

11⁄ 4"

71⁄ 4"

BZ12397

3"

13"

BZ12383

11⁄ 2"

81⁄ 4"

BZ12380

31⁄ 2"

171⁄ 2"

BZ12384

4"

20"

BZ12385

2"

91⁄ 2"

BZ12381

101⁄ 2"

BZ12382

47

230 lbs

Centerline Radius Chart:

21⁄ 2"

SEE PG

Nominal
Size

Smallest
Radius

49

Bending
Shoe

SEE PG

51

FOR MORE INFO ON

Electric Pumps

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B306S Models:
Part #

Conduit Description

Conduit Description

Weight I.D. #

Sweep Bending Shoe

2 lbs

1

CS2510* -

25 ton Action Cylinder

31 lbs

BZ12380 11⁄ 2"

Sweep Bending Shoe

2 lbs

2

BZ13401 -

(2) Pivot Shoes

4 lbs

9

BZ12381 2"

Sweep Bending Shoe

3 lbs

3

BZ12376 -

(2) Pivot Pins

4 lbs

10

BZ12382 21⁄ 2"

Sweep Bending Shoe

4 lbs

4

BZ12372 -

Bender Frame

54 lbs

11

BZ12383 3"

Sweep Bending Shoe

5 lbs

5

BZ12377 -

Shoe Lock Pin

.25 lb

12

BZ12384 31⁄ 2"

Sweep Bending Shoe

9 lbs

6

HC913

-

6' Hose

3 lbs

13

BZ12385 4"

Sweep Bending Shoe

12 lbs

7

CM7

-

Metal Case

98 lbs

14

*Must order A29 Smooth Saddle, see p. 50

44

Weight I.D. # Part #

BZ12379 11⁄ 4"

8

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

11⁄4" - 4" One-shot Eject-O-Matic™ Rigid Hydraulic Benders
Bends 11⁄ 4" to 4" rigid steel and rigid aluminum conduit. Eject-O-Matic™ feature retains
conduit with a T-pin while bending shoe is hydraulically retracted.
Once complete, the conduit automatically pops free.

tip:

• Optional 5" conversion kit available (B350) - segment only.

Double Acting (two hose)
cylinders provide
controlled and powerful bending
and return functions.

• Automatic ejection saves time and money.
• Ability to be powered by manual or electric pumps.

15
8

B343S
12

9

11

9

14
11

5

14

10
4
7

3
2
13

6

1

Part #

Description

Weight

B343S

11⁄ 4" - 4" One-shot

330 lbs

B343SPH84

11⁄ 4" - 4" One-shot w/ PH84 Hand Pump

380 lbs

B343SP408K 11⁄ 4" - 4" One-shot w/ P408K Electric Pump
B343SP408J
B343SP408S

362 lbs

1

430 lbs

1

432 lbs

1 ⁄ 4" - 4" One-shot w/ P408J Electric Pump
1 ⁄ 4" - 4" One-shot w/ P408S Electric Pump

Centerline Radius Chart:

SEE PG

47
SEE PG

Nominal
Size

Smallest
Radius

Bending
Shoe

49

Nominal
Size

Smallest
Radius

Bending
Shoe

11⁄ 4"

71⁄ 4"

BZ12041

3"

13"

BZ12351

11⁄ 2"

81⁄ 4"

BZ12051

31⁄ 2"

171⁄ 2"

BZ12391

SEE PG

2"

91⁄ 2"

BZ12061

4"

20"

BZ12392

21⁄ 2"

101⁄ 2"

BZ12341

51

FOR MORE INFO ON

Electric Pumps

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B343S Models:
Part #

Conduit Description

Weight I.D. # Part #

Conduit Description

Weight I.D. #

BZ12041 11⁄ 4"

Bending Shoe

4 lbs

1

BZ13401 -

(2) Pivot Shoes

4 lbs

9

BZ12051 11⁄ 2"

Bending Shoe

5 lbs

2

BZ12091 -

Angle Gauge

.5 lb

10

BZ12061 2"

Bending Shoe

7 lbs

3

BZ12376 -

(2) Pivot Pins

4 lbs

11

BZ12341 21⁄ 2"

Bending Shoe

14 lbs

4

BZ12374 -

Bender Frame

78 lbs

12

BZ12351 3"

Bending Shoe

15 lbs

5

BZ12377 -

Shoe Lock Pin

.25 lb

13

BZ12391 31⁄ 2"

Bending Shoe

40 lbs

6

HC913

-

(2) 6' Hoses

6 lbs

14

BZ12392 4"

Bending Shoe

41 lbs

7

CM7

-

Metal Case

98 lbs

15

CD3014 -

30-ton Double-Acting Cylinder*

31 lbs

8

B350

-

5" Conversion Kit (optional)

63 lbs

-

*Must order A29 Smooth Saddle, see p. 50

Bend Conduit
Hydraulically

Eject Conduit
Hydraulically

45

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

11⁄4" One-shot Eject-O-Matic™ Rigid Hydraulic Benders - 5" Sweep
Bends 11⁄ 4" to 4" rigid steel and rigid aluminum conduit in one shot and 5" sweep.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Eject conduit hydraulically by moving one pivot pin.
• Ability to be powered by manual or electric pumps.
9

16

B351S
13

10

10

12

15

12

5

15
4

11

3
14

8

7
1

6

2

Part #

Description

Weight

B351S

11⁄ 4" - 4" One-shot / 5" Sweep Combination

377 lbs

B351SPH84

11⁄ 4" - 4" One-shot / 5" Sweep Combo w/ PH84 Hand Pump 410 lbs

B351SP408J

11⁄ 4" - 4" One-shot / 5" Sweep Combo w/ P408J Elec. Pump 458 lbs

B351SP408S

11⁄ 4" - 4" One-shot / 5" Sweep Combo w/ P408S Elec. Pump

SEE PG

Nominal
Size

Rigid
Radius

Bending
Shoe

11⁄ 4"

71⁄ 4"

BZ12041

3"

13"

BZ12351

11⁄ 2"

81⁄ 4"

BZ12051

31⁄ 2"

171⁄ 2"

BZ12391

2"

91⁄ 2"

BZ12061

4"

20"

BZ12392

1

1

BZ12341

10 ⁄ 2"

47

Nominal
Size

Rigid
Radius

FOR MORE INFO ON

Electric Pumps

460 lbs

Centerline Radius Chart:

2 ⁄ 2"

SEE PG

Bending
Shoe

49
SEE PG

51

FOR MORE INFO ON

Manual Pumps

FOR MORE INFO ON

Cylinders

Components Included with B351S Models:
Part #

Conduit Description

Weight I.D. # Part #

Conduit Description

Weight I.D. #

BZ12041 11⁄ 4"

Bending Shoe

4 lbs

1

CD3014* -

30 ton Double Acting Cylinder

31 lbs

9

BZ12051 11⁄ 2"

Bending Shoe

5 lbs

2

BZ12388 -

(2) Pivot Shoes

10 lbs

10

BZ12061 2"

Bending Shoe

7 lbs

3

BZ12091 -

Angle Gauge

.5 lb

11

BZ12341 21⁄ 2"

Bending Shoe

14 lbs

4

BZ12390 -

(2) Pivot Pins

4 lbs

12

BZ12351 3"

Bending Shoe

15 lbs

5

BZ12389 -

Bender Frame

85 lbs

13

BZ12391 31⁄ 2"

Bending Shoe

40 lbs

6

BZ12377 -

Shoe Lock Pin

.25 lb

14

BZ12392 4"

Bending Shoe

41 lbs

7

HC913

-

(2) 6' Hoses

13 lbs

15

BZ12386 5"

Sweep Bending Shoe

18 lbs

8

CM7

-

Metal Case

98 lbs

16

*Must order A29 Smooth Saddle, see p. 50

Bend Conduit
Hydraulically

46

Eject Conduit
Hydraulically

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Z-Class Electric Pumps
Introducing Gardner Bender Z-Class hydraulic pumps—pumps that run cooler, use less electricity and are
easier to service than conventional pumps. Gardner Bender has used the latest metallurgical, bearing and
seal technologies to produce a pump whose features and benefits far surpass the electric pumps that are
available today. By reducing the number of moving parts, improving flow dynamics and decreasing friction,
Z-Class pumps will stay on the job longer, require less energy to operate and when needed, have lower
service costs.
• Two-speed high-efficiency pumps.
• Self-priming, high-flow 1st stage pump.
Double-Acting Pump
P408S
• Large, heavy-duty bearings and balanced rotating components.
1.7 HP Pump
• Replaceable piston check-valves.
• Powerful universal motor and excellent low-voltage operating.
• Brush design lasts 4-times longer.
• Ergonomic high strength composite.

P208J
Motor Size
Type
Reservoir Capacity

P408S

1.7hp

1.7hp

Z-Class

Z-Class

2 gallon

2 gallon

single-acting

double-acting

1st stage (psi)

100

100

2nd stage (psi)

10,000

10,000

1st stage (in3/min)

700

700

2nd stage (in3/min)

60

Pump Type
Pressure Rating

Single-Acting Pump
P208J
1.7 HP Pump

Output Flow Rate

Valve Type

60

3 way/2 pos.

4 way/3 pos.

Current Draw (max) (Amps)

20

20

Motor Voltage (VAC)

115

115

Sound (dba)

85-90

85-90

Weight (lbs)

70

Relief Valve Adj. Range (psi)

85

2,000-10,000

2,000-10,000

Back-lit LCD
Provides essential information:
• Hour & cycle counts
• Low voltage warning
• Self-test, diagnostic and read-out capabilities
• Pressure read-out and adjustable trigger
pressure settings
• Information displayed in 6 languages

▲

▲

▲

47

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Single-Acting Pump

Economy Electric Pumps

PE20D
1
⁄ 2 HP Pump

PE20D & PE22J
• Lightweight - 22 - 41 lbs.
• 115 V AC 50/60 cycle universal motor works well with
long extension cords or generator-driven power.
• Long 10' remote control for operator safety.
• Great for medium-sized cylinders.

Submerged Electric Pumps
PE24J
Single-Acting Pump

• Powerful 1⁄ 2 hp induction motor is submerged in the oil reservoir to run
cooler, protect motor, simplify pump interface, save space, reduce noise.

PE22J
1
⁄ 2 HP Pump

• Large 1.7 gallon reservoir allows for a wide operation of cylinders.
• Full-length slide tube for visual monitoring of oil level.
PE20D
1⁄ 2

Motor Size
Type

hp

Economy

Reservoir Capacity
Pump Type

PE22J
1⁄ 2

PE24J
1⁄ 2

hp

Economy

hp

Submerged

1 gallon

1 gallon

1 gallon

Single-Acting

Single-Acting

Double-Acting

Pressure Rating
1st stage (psi)

200

200

200

2nd stage (psi)

10,000

10,000

10,000

1st stage (in3/min)

200

200

200

2nd stage (in3/min)

20

20

20

Dump

3-way, 2 pos.

4-way, 3 pos.

Double-Acting Pump
PE24J
1
⁄ 2 HP Pump

Output Flow Rate

Valve Type
Current Draw (Amps)

9.5

9.5

9.5

Motor Voltage (VAC)

115

115

115

Sound (dba)
Weight

85

85

85

29 lbs

27 lbs

32 lbs

PE20D or PE22J Economy Electric Pumps

Oil Flow (in3/min) 왘

Economy Series Flow Chart

Pressure (psi) 왘

PE24J Submerged Electric Pumps
2.21

1.50

Submerged Flow Chart (@ 60 Hz )

Oil Flow (in3/min) 왘

3/8" 18NPTF

16.00

11.20
9.42
7.30

7.06
1.00
3.89

2.00

48

Pressure (psi) 왘

4.98

8.42
8.97

4.00

7.18
7.73

3.62

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Manual Hydraulic Pumps

PH20
Manual Pump

Durable manual pumps utilized with Gardner Bender hydraulic bender sets.
• PH80 and PH84 models feature two-speed action for faster cylinder
cycle time.
• PH39 has economical single-speed design.
• All pumps contain internal high-pressure relief overload protection.

PH20
Pump Type

PH39

PH80

PF65

Single-Speed Single-Speed Two-Speed Single-Speed

Usable Oil Capacity (in3)

20

40

134

PH39
Manual Pump

22

Pressure Rating
1st stage (psi)

N/A

N/A

350

N/A

2nd stage (psi)

10,000

10,000

10,000

6,500

1st stage (in3)

N/A

N/A

.99

N/A

2nd stage (in3)

.055

.16

.15

.16

Max. Handle Effort

72 lbs

111 lbs

104 lbs

125 lbs

Piston Stroke (in)

.50

.81

1.00

.81

Oil Displ. per Stroke

Piston Diameter
1st stage (in)

.75

.94

1.13

.50

2nd stage (in)

.38

.44

.44

N/A

PH80
Manual Pump

Dimensions (in)
A

7.31

15.50

16.75

8.25

B

13.25

20.47

21.22

12.88

C

1.13

1.28

1.00

1.28

D

3.37

1.50

1.75

1.5

E

1.13

1.25

2.13

1.88

F

-

-

-

-

H

12.56

18.25

20.75

8.5

J

.75

1.18

1.14

1.18

L

5.63

4.69

6.88

4.38

M

-

2.56

.75

.51

N

3.75

5.25

5.75

5.25

P

3.18

-

4.76

-

Q

-

-

-

-

R

-

-

.83

-

S

-

-

.31

-

T

-

-

-

-

Weight

4.5 lbs

13 lbs

24 lbs

12 lbs

PH20

PF65
Manual
Foot Pump

H

Release Valve

J

M
L

G
S
E
P
N

A
B

D

C

PH80

PH39 & PF65
w/o conversion kit

H

J

3/8"18NPTF

T

H
J

3/8"-18NPTF

40˚

50˚

L

L

E
Q
P
N

E
S

R

D
F

A
B

D

C
M

N

A
B

C
M

49

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Hydraulic Bender Accessories
Quality accessories to increase bending efficiency.

See following page for Hydraulic Cylinder Specifications.

Hoses and Oil
Part #
Description

Weight

H8210

10' Rubber Hydraulic Hose w/ AH630 coupler

4 lbs

H864

6' Rubber Hydraulic Hose w/ AH630 coupler

2 lbs

HC913

6' Rubber Hydraulic Hose w/ CH604 coupler

3 lbs

HC963

6' Plastic Hydraulic Hose w/ CH604 coupler

2 lbs

HC927

10' Rubber Hydraulic Hose w/ CH604 coupler

4 lbs

HF100

Hydraulic Oil, Quart

2 lbs

HF101

Hydraulic Oil, Gallon

8 lbs

Part #

Description

Weight

A630

Hydraulic Coupler: 1⁄ 4" Female Half

.5 lb

Hydraulic Coupler: 1⁄ 4" Male Half

.5 lb

Hydraulic Coupler: 3⁄ 8" High-flow Female Half

.5 lb

HF101

H864

Couplers

C604
CD411

Hydraulic Coupler: 3⁄ 8" High-flow Male Half

.5 lb

Universal Dust Cap for CR400 & CH604, plastic

.1 lb

A630

Smooth Saddles
Part #

For Use With

2A Thread

A12

10-ton Cylinders

1 - 8 UNC

Weight
5 lbs

A29

25 ton Cylinders

11⁄ 2 - 16 UNC

7 lbs
C604

tip:

When ordering a replacement
hydraulic cylinder for your bender
you must also order a new smooth saddle.
See chart above.

note:

When installing a new
saddle, apply Loc-TITE™
to threads prior to installation.

A12/A29 Dimensions

2.75

1.875

.25
2.0

50

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Hydraulic Cylinder Specifications
CD3014
J

CS106
P
O
F

CH1211

W

CH1211 has a 1.88" diameter base
that protrudes .25" from base.

X

W
O

J
O

B

P
F

P

B

K

3/8"18NPT

X

N

A
E

X

F
W

I

K

A

E
Z

B

H

H

A
3/8"18NPT

Z
3/8"-18NPT

V

V

E
U

Y U D

H

D

D

CD1012, CD308,
CD3014 models

Cylinder Capacity (tons)
Stroke (in)
Max Cylinder Capacity (tons)

Push

Max Cylinder Capacity (tons)

Pull

Cylinder Effective Area (in2)

CS106, CS1010,
CS2510, CS2514 models

CH1211 model
CH1211
12.00

CS106
10.00

CS1010
10.00

CS2510
25.00

CS2514
25.00

1.63

6.13

10.13

10.25

14.25

2.77

2.23

2.23

5.15

CD1012
10.00

CD308
30.00

CD3014
30.00

12.00

8.25

14.50

10.00

30.00

30.00

4.00

5.00

5.00

5.15

Cylinder Effective Area (in2)

Push

2.23

6.51

6.51

Cylinder Effective Area (in2)

Pull

0.80

3.00

3.00

Oil Capacity (in3)

4.52

13.67

22.59

52.79

73.39

Oil Capacity (in3)

Push

26.80

53.67

92.70

Oil Capacity (in3)

Pull

9.00

25.00

43.00

Collapsed Height (in)

A

4.75

9.75

13.75

14.75

18.75

18.00

15.25

21.63

Extended Height (in)

B

6.38

15.88

23.88

25.00

33.00

30.00

23.50

36.13

Outside Diameter (in)

D

2.75

2.25

2.25

3.38

3.38

2.88

4.00

4.00

Cylinder Bore Diameter (in)

E

2.13

1.69

1.69

2.56

2.56

1.69

2.88

2.88

Plunger Diameter (in)

F

1.38

1.50

1.50

2.25

2.25

1.38

2.13

2.13

Cyl. Base to Advance Port (in)

H

0.75

0.75

0.75

1.00

1.00

1.44

1.44

1.56

Top to Ret. Port (in)

I

2.25

3.19

3.19

Saddle Diameter (in)

J

–

1.38

1.38

2.00

2.00

1.38

2.00

2.00

Saddle Protr. from Plunger (in)

K

–

0.25

0.25

0.41

0.41

0.06

0.41

0.41

Plunger Internal Thread (in)

O

⁄ 4-16

1-8

1-8

11⁄ 2-16

11⁄ 2-16

1-8

11⁄ 2-16

11⁄ 2-16

Plunger Thread Length (in)

P

0.63

0.75

0.75

1.00

1.00

1.00

1.00

1.00

2.31

–

3

Base Mounting Holes
Bolt Circle Diameter (in)

U

Thread (in)

V

Thread Depth (in)

Z

1.56
5

⁄ 16-18

1.56
5

⁄ 16-18

2.31
1

⁄ 2-13

–

–

⁄ 2-13

–

–

–

1

.50

.50

.75

.75

–

–

–

Collar Thread (in)

W

23⁄ 4-16

21⁄ 4-14

21⁄ 4-14

35⁄ 16-12

35⁄ 16-12

21⁄ 4-14

35⁄ 16-12

35⁄ 16-12

Collar Thread Length (in)

X

1.19

1.13

1.13

1.94

1.94

1.06

1.94

1.94

Center Hole Diameter (in)

Y

0.77

Weight (lbs)

6.20

9.80

14.00

31.00

39.00

31.00

40.00

64.00

Rating (tons)

12

10

10

25

25

10

30

30

Saddle (sold separately) (tons)

12

10

10

25

25

10

30

30

51

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Mechanical Sidewinder® Benders
A fully portable system that bends:

BWF800

• 1⁄ 2" to 11⁄ 2" rigid steel, rigid aluminum, PVC-Coated
rigid and IMC conduit.

BWF888

• 1⁄ 2" to 2" EMT conduit.
• Removable bender can be bolted onto workbench or
truck bed for unparalleled flexibility.
• 0° to 90° bend indicator built into the frame shows
bend angle while bending.

BWF88

• Double-dog ratchet prevents shoe spring-back
during bends; allows fast release after bending.
• Interchangeable shoes adapt single bender frame
to cover widest range of conduit types.

BWF800 Bender Head Assembly
Part #
Description

Weight

BWF888

Sidewinder® Bender w/ out Shoe Groups

BF41

Urethane Roller Assembly & Shaft Assembly 3 lbs

BF42

2" EMT Strap

8 lbs

BF43

Frame, Retainer Pin and Decals

25 lbs

BF47

Shaft Assembly

3 lbs

BF48

2" Steel Sleeve and Strap Kit

4 lbs

BF49

Ratchet Assembly

9 lbs

BF52

Bend Instruction Decals

1 lb

BF90

Shoe Lock Kit (upgrade older frames)

2 lbs

BTI12520

Insert Teeth (for 11⁄ 4" - 11⁄ 2" and 2" shoes)

1 lb

CM260281 Urethane Roller Only

BF17

64 lbs
BF52
BF48

BF42

BF47 CM260281

BF90
BF41

1 lb

Jaws attach to shoes with chain.
BT2000

BR12515

Repair Kits for BF49
Part # Description
BW72

Lever and Washer Kit

BW74

Drive Pawl and Spring Kit

BW75

Hold Pawl and Spring Kit

BW76

Pin and Spring Kit

See Repair Parts Sheet for a detailed
breakdown of these kits.

BT12515

BR20000

tip:
BT57510

A bend handle is not
included with these units.
A 6 ft. piece of 1" Dia. Rigid conduit
can be used.

BR57510

Bending Shoes
Part #

52

Clamping
Jaw Range
⁄ 2", 3⁄ 4" & 1"

Conduit

Weight

Clamping
Jaw Part #

Weight

BT57510

1

EMT

15 lbs

BZ1306

2 lbs

BT12515

11⁄ 4" - 11⁄ 2"

11⁄ 2" EMT

34 lbs

BZ1307

4 lbs

BT2000*

2"

EMT

39 lbs

BZ13081

4 lbs

BR57510

1⁄ 2", 3⁄ 4"

Rigid & IMC

18 lbs

BZ1306

2 lbs

BR12515

11⁄ 4" - 11⁄ 2"

Rigid & IMC

28 lbs

BZ1307

4 lbs

BR20000

2"

Aluminum Rigid

33 lbs

BZ1308

3 lbs

& 1"

*Shoe includes BZ1345 follow bar and strap.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Sidewinder® 1⁄2" - 1" Rigid / IMC Bender
Bends 1⁄ 2", 3⁄ 4" and 1" rigid steel and IMC conduit.
• Shoe lock slips into place and removes easily for
quick change-outs.
• Fully portable.

Part #

Contains
Weight Part #
Description

BW11

78 lbs

BWF888

Sidewinder® Bender Frame

BR57510

1

Weight
64 lbs

⁄ 2", 3⁄ 4" & 1" Rigid & IMC Shoe 18 lbs

Sidewinder® 11⁄4" - 11⁄2" Rigid / IMC Bender
Bends 11⁄ 4" and 11⁄ 2" rigid steel and IMC conduit.
• Shoe tooth inserts can be replaced in the field
which allows extended service life.
• Order part number BTI12520.

Part #

Contains
Weight Part #
Description

BW12

88 lbs

Weight

BWF888

Sidewinder® Bender Frame

64 lbs

BR12515

11⁄ 4" & 11⁄ 2" Rigid & IMC Shoe

28 lbs

Sidewinder® 1⁄ 2" - 11⁄2" Rigid / IMC Bender
Bends 1⁄ 2" to 11⁄ 2" rigid steel and IMC conduit.
• Combines features and bending capabilities
of BW11 and BW12.
• Able to handle the most commonly used rigid
and IMC conduit sizes.

Part #

Contains
Weight Part #
Description

BW15

106 lbs BWF888

Sidewinder® Bender Frame

BR57510

1

BR12515

11⁄ 4" & 11⁄ 2" Rigid & IMC Shoe

Weight
64 lbs

⁄ 2", 3⁄ 4" & 1" Rigid & IMC Shoe 18 lbs
28 lbs

53

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Sidewinder® Rigid / IMC & Rigid
Aluminum Conduit Bender
Bends 1⁄ 2" to 11⁄ 2" rigid and IMC and 2" rigid
aluminum conduit. Adds 2" rigid aluminum
conduit bending capability to 1⁄ 2" to 11⁄ 2" rigid
and IMC capacity of BW15 Sidewinder®.
• Larger shoes feature field-replaceable tooth
inserts for extended service life.
• Set includes metal storage box.

Part #

Contains
Weight Part #
Description

BW20

175 lbs BWF888

Sidewinder® Bender Frame

Weight
64 lbs

BW20S

BR57510 1⁄ 2", 3⁄ 4" & 1" Rigid & IMC Shoe 18 lbs

(Shoe Set)

BR12515 11⁄ 4" & 11⁄ 2" Rigid & IMC Shoe

28 lbs

BR20000 2" Rigid Aluminum Shoe

33 lbs

CM4 4-cubic-foot Case

26 lbs

Sidewinder® Bender for All
Conduit Types
Bends 1⁄ 2" to 11⁄ 2" rigid and IMC, 1⁄ 2" to 2"
EMT, 1⁄ 2" to 2" rigid aluminum and 1⁄ 2" to 11⁄ 2"
PVC-coated rigid conduit.
• The most comprehensive Sidewinder® set for
every job.
• Larger shoes feature filed-replacement-tooth
inserts for extended service life.
• Set includes metal storage box.

54

Part #

Contains
Weight Part #
Range

BW30

290 lbs BWF888

Weight

Sidewinder® Bender Frame

64 lbs

BW30S

BT57510 1⁄ 2", 3⁄ 4", & 1" EMT Shoe

18 lbs

(Shoe Set)

BT12515 11⁄ 4" & 11⁄ 2" EMT Shoe

28 lbs

BT2000 2" EMT Shoe

28 lbs

BR57510 1⁄ 2", 3⁄ 4" & 1" Rigid & IMC Shoe

28 lbs

BR12515 11⁄ 4" & 11⁄ 2" Rigid & IMC Shoe

28 lbs

BR20000 2" Rigid Aluminum

28 lbs

CM7 7-cubic-foot Case

51 lbs

Shoes available
separately or as
a BW20S Set

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Sidewinder® Bender for Most
Conduit Types
Bends 1⁄ 2" to 11⁄ 2" rigid and IMC, 11⁄ 4" to 2" EMT
and 1" to 11⁄ 2" PVC-coated rigid conduit.
• The economical choice for bending the most
popular sizes of rigid/IMC and larger
EMT conduit.
• Set includes metal storage box.

Part #

Contains
Weight Part #
Description

BW27

210 lbs BWF888

Weight

Sidewinder® Bender Frame

64 lbs

BW27S

BT12515 11⁄ 4" & 11⁄ 2" EMT Shoe

28 lbs

(Shoe Set)

BT2000 2" EMT Shoe

39 lbs

BR57510 1⁄ 2", 3⁄ 4" & 1" Rigid & IMC Shoe 18 lbs
BR12515 11⁄ 4" & 11⁄ 2" Rigid & IMC Shoe

28 lbs

CM4 4-cubic-foot Case

26 lbs

Shoes available
separately or as
a BW27S Set

Sidewinder® EMT & PVC-Coated
Rigid Conduit Bender
Bends 2" EMT and 11⁄ 2" PVC-coated rigid conduit.
• Field-replaceable shoe-tooth inserts extend
service life.
• Order part number BTI12520.

Part #

Contains
Weight Part #
Description

BW201

99 lbs

Weight

BWF888

Sidewinder® Bender Frame

64 lbs

BT2000

2" EMT Shoe

39 lbs

Sidewinder® EMT & PVC-Coated
Rigid Conduit Bender
Bends 1⁄ 2" to 2" EMT and 1⁄ 2" to 11⁄ 2"
PVC-coated rigid conduit.
• Larger shoes feature filed-replacement-tooth
inserts for extended service life.
• Set includes metal storage box.

Part #

Contains
Weight Part #
Description

BW221

184 lbs BWF888

Sidewinder® Bender Frame

Weight
64 lbs

BW221S

BT57510 1⁄ 2", 3⁄ 4" & 1" EMT Shoe 18 lbs

(Shoe Set)

BT12515 11⁄ 4" & 11⁄ 2" EMT Shoe 28 lbs
BT2000 2" EMT Shoe

39 lbs

CM4 4-cubic-foot Case

26 lbs

55

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Big Ben™ Conduit Hand Bender
GB's new series of Big Ben™ aluminum hand benders has improved
traditional hand benders by enlarging the hook, increasing the foot
pedal size and clearance, highlighting the markings and
incorporating a dual sight-line system for bending on the floor
or in the air. GB's new Big Ben™ series offers industry
standard markings to simplify the contractor's job. Made
of rugged, heat-treated aluminum, the Big Ben™ series
is backed by a lifetime warranty and is available in the
most common sizes of 1⁄2", 3⁄4" and 1".
• All models include embossed sight lines for 10°, 22°,
30°, 45°, 60° and 90°.
• Industry-standard markings– 30° bend when handle is straight up.
SEE PG

• Bigger hook with a 5x durability factor.

FOR MORE INFO ON

59

• Bigger foot pedal– 40% larger.

Handles

• More foot room allows for a booted foot.
• Bend-back channel easily corrects conduit over-bends.

These benders
available with or without
high-strength steel handle

• Vise-Mate™ holds conduit
while cutting or reaming.
Lifetime
Warranty

Part Number

960

960H

961

961H

962

962H

Description

Head Only

Head & Handle

Head Only

Head & Handle

Head Only

Head & Handle

1

Application

⁄ 4" EMT / 1⁄ 2" Rigid

1" EMT / 3⁄ 4" Rigid

Material

Aluminum

Aluminum

Aluminum

Aluminum

Aluminum

Aluminum

Weight

1.34 lbs

5.06 lbs

1.58 lbs

5.34 lbs

3.16 lbs

7.01 lbs

3.69"

3.69"

4.74"

4.74"

5.81"

5.81"

EMT Size

1⁄ 2"

1⁄ 2"

3⁄ 4"

3⁄ 4"

1"

1"

Rigid Size

—

—

1⁄ 2"

1⁄ 2"

3⁄ 4"

3⁄ 4"

Bend Radius

56

3

⁄ 2" EMT

Industry Standard Style
30° bend when handle is
straight up

Bigger Hook
With a 5x durability factor

Bigger Foot Pedal
40% larger

More Foot Room
Allows for a booted foot

Bend-Back Channel
Easily corrects conduit
over-bends

Vise-Mate™
Holds conduit while cutting
or reaming

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Gardner® EMT / Rigid
Aluminum Hand Benders (Series 930B-933)
Bends 1⁄ 2" to 11⁄ 4" EMT, and 1⁄ 2" to 1" rigid and rigid
aluminum conduit.
• Built-in acrylic level gauge helps make precise bends
in half the time.
• All models include embossed sight lines for 10°, 22.5°,
30°, 45°, 60° and 90°.
• Patented Vise-Mate™ holds conduit steady as it is cut
to appropriate size.
Lifetime
Warranty

These benders
are available with or without
high-strength steel handle
SEE PG

59

Part Number

930B

930H

931B

931H

Description

Head Only

Head & Handle

Head Only

Head & Handle

1⁄ 2"

Application
Fits Handle #

3⁄ 4"

EMT

Handles

EMT / 1⁄ 2" Rigid

BH-75

Included

BH-75

Included

Material

Aluminum

Aluminum

Aluminum

Aluminum

Weight

.8 lbs

5.3 lbs

2.3 lbs

6.4 lbs

5"

5"

6"

Bend Radius

FOR MORE INFO ON

6"

EMT Size

1

⁄ 2"

1

⁄ 2"

3

3

Rigid Size

—

—

1

1

⁄ 4"

⁄ 4"

⁄ 2"

⁄ 2"
Insert conduit through Vise-Mate™
opening and cut to desired length.

Part Number

932

932H

933

Description

Head Only

Head & Handle

Head Only

1" EMT / 3⁄ 4" Rigid

Application
Fits Handle #

11⁄ 4" EMT / 1" Rigid

BH-100

Included

BH-125

Material

Aluminum

Aluminum

Aluminum

Weight

7.75 lbs

4.1 lbs

10 lbs

Bend Radius

8"

8"

12"

EMT Size

1"

1"

11⁄ 4"

Rigid Size

3

⁄ 4"

3

⁄ 4"

1"

57

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Iron Hand Benders (Series 920-923)
Bends 1⁄ 2" to 11⁄ 4" EMT and 1⁄ 2" to 1" rigid and rigid
aluminum conduit.
• Cast-in-place degree marks facilitate accurate bends.
• Constructed of rugged-malleable iron for strength and durability.
• Arrow and diamond indicate beginning and
back-of-bend locations.
Lifetime
Warranty

These benders
are available with or without
high-strength steel handle
SEE PG

59

Part Number

920

920H

921

921H

Description

Head Only

Head & Handle

Head Only

Head & Handle

1

Application
Fits Handle #

⁄ 4" EMT / 1⁄ 2" Rigid

Included

BH-75

Material

Iron

Iron

Iron

Iron

Weight

2.7 lbs

7.2 lbs

5 lbs

9.6 lbs

Bend Radius

5"

5"

Included

6"

6"

EMT Size

1

⁄ 2"

1

⁄ 2"

3

3

Rigid Size

—

—

1⁄ 2"

1⁄ 2"

⁄ 4"

⁄ 4"

Part Number

922

922H

923

Description

Head Only

Head & Handle

Head Only

1" EMT / 3⁄ 4" Rigid

Application
Fits Handle #

11⁄ 4" EMT / 1" Rigid

BH-100

Included

Material

Iron

Iron

Iron

Weight

4.9 lbs

14.5 lbs

14 lbs

Bend Radius

8"

8"

11"

EMT Size

1"

1"

11⁄ 4"

Rigid Size

58

3

⁄ 2" EMT

BH-75

3

⁄ 4"

3

⁄ 4"

BH-125

1"

FOR MORE INFO ON

Handles

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Hand Bender Handles
BH-125

High quality, pre-threaded bender handles for
all Gardner Bender bender heads.

BH-100

• Constructed of high-strength steel.
• Powder painted for increased durability.

BH-75

• Comfort grip design ensures increased
grasping capabilities.
Fits Aluminum
Bender #

Fits Iron
Bender #

Weight

3

930B, 931B, 960, 961

920, 921

3.5 lbs

BH-100

1" NPT x 44" long

932, 962, 820, 821

922

5.5 lbs

BH-125

11⁄ 4" NPT x 54" long 933, 822

923

7.2 lbs

Part #

Size

BH-75

⁄ 4" NPT x 38" long

Hickey Bending Heads
For 1⁄ 2" to 1" rigid conduit.

820
822

• Manufactured using permanent mold process with
high-strength, heat-treated aluminum.

821

• Lightweight and extremely durable.
Part #

Fits Bender Handle #

Weight

820

Rigid Size
1⁄ 2"

BH-100

.9 lb

821

3⁄ 4"

BH-100

1.2 lbs

822

1"

BH-125

2.2 lbs

HotTube™ PVC Bender for
⁄2" to 2" Conduit (schedule 40-80)

1

This patented high-production bender can
simultaneously heat up to five lengths of 1⁄ 2"
conduit and up to three lengths of 3⁄ 4" conduit,
without rotating.
• Adjustable thermostatic control heats conduit
fast and maintains perfect bending temperature.
• Patented technology enables HotTube™ to maintain temperature
in wide range of ambient temperatures and wind conditions.
• No need to rotate conduit. Won’t burn or scorch.
• Insulated, weatherproof housing provides safe, cool operation–
unit is portable immediately after use.
• Dimensions: 273⁄ 8" x 51⁄ 2" x 81⁄ 2".
• Temperature Range: 0 °F - 350 °F.

Part #

Description

BHT-520A

1⁄ 2"

- 2" HotTube™

Power Requirements
Watts
Volts
Amps Weight
1440

115/120

12

24 lbs

59

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

HotBox™ PVC Bender for 1⁄2" to 2" Conduit
(schedule 40-80)
Complete PVC bending system includes
Bend-Guide™ bending gauge.
• Highly polished reflector surfaces heat conduit
quickly and evenly.
• Low power consumption.
• Lightweight with convenient carrying handle and cover clasp.
• Bending guide adjusts for 0° to 90° bend segments in any radius
from 6" to 12".
• Dimensions: 291⁄ 2" x 7" x 71⁄ 8".
• Temperature Range: 0 °F - 450 °F.

Part #

Description

Power Requirements
Watts
Volts
Amps Weight

BHB-520D 1⁄ 2" - 2" HotBox™

1450

115/120

12

17 lbs

BHE-50K

1450

115/120

12

1 lb

Replacement Heating Element

Convenient Bend-Guide™ is included with every BHB-520D.

HotBox™ PVC Bender for 1⁄2" to 4" Conduit
(schedule 40-80)
Meets most PVC bending needs. Accommodates
conduit range from 1⁄ 2" to 4".
• Highly polished reflector surfaces heat conduit
quickly and evenly.
• Large wheels provide job-site portability.
• Allows conduit to be reheated and reformed.
• Dimensions: 541⁄ 2" x 81⁄ 2" x 111⁄ 2".
• Temperature Range: 0 °F - 400 °F.
Part #

60

Description

Power Requirements
Watts
Volts
Amps Weight

BHB-540A 1⁄ 2" - 4" HotBox™

2400

115/120

20

34 lbs

BHE-540

2400

115/120

20

3.5 lbs

Replacement Heating Element

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

HotBox™ PVC Bender for 1⁄2" to 6" Conduit
(schedule 40-80)
BHB-560P

Accommodates conduit range from 1⁄ 2" to 6". Specially
designed covers and heat flow system allow heating of
shorter lengths as well as lengths sufficient for 48"
radius, 90° elbows.
• Highly polished reflector surfaces heat conduit quickly and evenly.
• Power drive model automatically rotates conduit for faster bends.
• Large wheels provide job-site portability.
• Allows conduit to be reheated and reformed.
• Dimensions: 74" x 111⁄ 2" x 14".
• Temperature Range: 0 °F - 400 °F.
Part #

Description

Power Requirements
Watts
Volts
Amps Weight

BHB-560

1

5500

230

24

60 lbs

BHB-560P

1

5500

230

24

68 lbs

BHE-560

Replacement Heating Element

5500

230

24

8.5 lbs

⁄ 2" - 6" HotBox™
⁄ 2" - 6" HotBox™ w/ Power Rotator

HotBlanket™ PVC Benders for 1⁄2" to 4"
Conduit (all schedules)
New improvements have made this
family of conduit benders the most durable
and economical bending system in the industry.

Wrap

• Internal thermostatic control will not scorch or burn conduit.
• Use in any in-place position.
• Thermostatic control heats pipe fast, even in cold
or windy conditions.
• Multiple circuit design extends the life of the blankets.
Heat

• Multiple wound heavy-gauge wire ensures the longest life
of any bending blanket.
Part #

Conduit
Size

Power Requirements
Watts
Volts
Amps Weight

⁄ 2" - 11⁄ 2"

18" x 71⁄ 2"

310

120

2.6

BB2030

2" - 3"

25" x 111⁄ 4"

690

120

6.3

3 lbs

BB3040

3" - 4"

36" x 143⁄ 8"

1120

120

10.2

6 lbs

BB5150

1

Dimensions
(L x W)

2 lbs
Bend

PVC Plug Set
Prevents conduit from collapsing or deforming by supporting
the inside surface during heating and bending.
• Decreases heating time by trapping hot air in the conduit.
• Use with 2" and larger conduit.
• Includes durable storage case.

Part #

Description

Components
Weight Part #
Description

Weight

BVS-240

2" - 4" PVC Plug Set

6 lbs

.32 lb

BVP20

2" PVC Plug

BVP25

21⁄ 2" PVC Plug

.38 lb

BVP30

3" PVC Plug

.44 lb

BVP40

4" PVC Plug

.44 lb

61

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Guide to Bending Booklet
Easy-to-use instructions for completing multiple types
of conduit bends.
• Contains quick reference charts and guides.
• Easy to carry.
• Provided at no charge.
Part #

Description

E507

Guide to Profitable Bending Booklet

Tool-Guard™ Metal Storage Cases
Shelter equipment from dust, grease, dirt or loss on the
jobsite, maintenance area or shop.
• Constructed of durable 16-gauge steel with quality
arc-welded seams.
• Dual rolled-lip design resists sprung hinges, keeps cover
aligned, adds rigidity and strength.
• Continuous heavy-duty hinges stand up to rugged use.

CM7

• Water-resistant design retards leakage.
• Bottom skids enhance protection and permit easy
forklift movement.
• Recessed closure shields padlock from cutting and
prying attempts.
(lock not included).

CM20

• Painted with rust-resistant primer and finished in
durable red enamel.

tip:

Part #

62

Use #5 Master Lock™
when locking boxes.

Size
Inside Dimensions
Shelf Dimensions
cu. in. Length
Width Rear Height Front Height Length Width Weight

CM4

41⁄ 2

31"

14"

14"

14"

–

–

CM7

8

36"

19"

18"

18"

–

–

98 lbs

CM20

28

60"

24"

28"

28"

591⁄ 2"

51⁄ 4"

182 lbs

56 lbs

CONDUIT FISHING

67

69

73

Gardner Bender offers a complete range
of solutions for conduit fishing and cable
pulling, with the contractor in mind. From

74

fish tapes to powered cable pullers, our
products are designed around durability,
innovation and ease of use.

81

63

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Blower Systems

Material Handling

JetLine® Super Blower™ (Electric) . . . . .66

Hoist Lift (Hi-Hoist™) . . . . . . . . . . . . . . . .94

Super Blo-Vac™ System (Blower/Vacuum) .67

Reel Rollers

Cable Pullers and Accessories

30" Reel Roller . . . . . . . . . . . . . . . . . .91

2,000 lb Mini-Brutus™ Powered Puller . . .80

Handy-Saver™ Reel Roller . . . . . . . . .91

8,000 lb Brutus™ Powered Puller . . . . . . .81

Reel Jacks - Telescoping . . . . . . . . . . . . .91

Sub-Assembly Kits . . . . . . . . . . . . .81-82

Wire Caddies & Carts

Brutus™ Powered Puller

Deluxe Spool Cart & Caddy Combo . .93

Application Instructions . . . . . . . . .83-85

Hand Wire Caddy . . . . . . . . . . . . . . . .92

Hook Sheaves . . . . . . . . . . . . . . . . . . . . . .86

Heavy-Duty Spool Cart &

Tension Meter . . . . . . . . . . . . . . . . . . . . . .86

Caddy Expander Combo . . . . . . .93

Conduit Measuring Tape . . . . . . . . . . . . . .73

Portable Wire Caddy . . . . . . . . . . . . . .92

CO2 Systems
Air Compressor Seal-Off . . . . . . . . . . . . . .71

Replacement Parts . . . . . . . . . . . . . . .94

CO2 Refill Connector . . . . . . . . . . . . . . . .71

Spool Caddy Cart . . . . . . . . . . . . . . . .92

Powr House™ Conduit Fishing Systems . .69

Wire Dispenser . . . . . . . . . . . . . . . . . .93

Powr-Pak I™ 5 lb. Portable System . . . . .70
Powr-Pak II™ 5 lb. Basic System . . . . . . .70
Fish Tapes and Accessories
Cable Snake™ Flat Wire Tape . . . . . . . . . .76
Cable Snake™ Steel Fish Tapes . . . . . .75-76

Lubricants
Wire-Aide™ . . . . . . . . . . . . . . . . . . . . . . .86
Poly-Gel™ . . . . . . . . . . . . . . . . . . . . . . . . .87
Super-Slick™ . . . . . . . . . . . . . . . . . . . . . .88
Pull Line / Line Carriers

Economy Fish Tape . . . . . . . . . . . . . . . . . .77

Foam Line Carriers . . . . . . . . . . . . . . . . . .72

Fiberline™ Non-Conductive

Heavy-Duty Bulk Nylon Line . . . . . . . . . . .73

Fiberglass Fish Tapes . . . . . . . . . . . . .77

Inflatables® Line Carriers . . . . . . . . . . . . .71

Fish Tape Ball . . . . . . . . . . . . . . . . . . . . . .79

Missile Line Carriers . . . . . . . . . . . . . . . . .71

Fish Tape Leader . . . . . . . . . . . . . . . . . . . .78

Poly-Pull™ Line . . . . . . . . . . . . . . . . . . . .73

Nylo-Flex™ Non-Conductive

Power Saver™ Line Packages . . . . . . . . . .72

Nylon Fish Tapes . . . . . . . . . . . . . . . . .78
Replacement Tapes - Steel . . . . . . . . . . . .77

Tag Along™ Line Packages . . . . . . . . . . . .72
Rope

Rewind™ Fish Tape Winder . . . . . . . . . . .75

Rope Selection Guide . . . . . . . . . . . . . . . .90

Streamline™ Steel Fish Tapes . . . . . . . . . .75

Poly-Pro™ General Purpose Rope . . . . . .89

UpperHand™ Steel Fish Tapes . . . . . . . . .74

Super Tuff-Pull™ Double Braided Rope . .88

UpperHand™ Non-Conductive

Tuff-Pull™ Single Braided Rope . . . . . . . .89

Fiberglass Fish Tapes . . . . . . . . . . . . .74
Fish Sticks

64

Portable Wire Dispenser . . . . . . . . . . .94

12’ Fish Ease™ . . . . . . . . . . . . . . . . . . . . .79
15’ Glo Fish™ . . . . . . . . . . . . . . . . . . . . . .79

Vacuum / Blowers
Super Blo-Vac™ System . . . . . . . . . . . . . .67

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Conduit Installation Chart
• JetLine® Super Blower™ System (B60) Page 68
• Super Blo-Vac™ System (BV208DA) Page 69
The following chart illustrates typical conduit installation. Fewer bends and lighter pull lines can increase
the maximum distances obtainable. The chart below refers to a typical run with (4) 90° bends and no
obstructions or leaks, using JetLine® PL232 Pull Line (200lb test) and foam line carriers.

Conduit
Size

Conduit Run Length
100'

150'

Over
200'

300'

400'

500'

600'

700'

800'

900'

1,000'

1

⁄ 2"

3

⁄ 4"
B60 (21⁄ 2" - 6")

1"

BV208DA (1⁄ 2" - 6")

11⁄ 4"
11⁄ 2"
2"
21⁄ 2"
3"
31⁄ 2"
4"
5"
6"

65

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

JetLine® Super Blower™ System

2

The most powerful blower system in the market.
• Blower unit delivers 275 cfm at 3 psi – more than
enough to blow 1⁄ 2" Poly-Pull™ rope 1000' or
more through conduit up to 6" diameter.
• Lightweight (35 lbs) and compact
(24" x 71⁄ 2" x 81⁄ 4") power unit can be
hand-carried to the work area.

1
3

• Extra-long 25' hose allows power unit to be
located outside the manhole or vault.

7

6

5

4

• All work is done from one end of the conduit, permitting one-person
operation. Works on 115 V AC power.
• System includes patented Dial-A-Line™ Seal-Off System; eliminates
extra steps by allowing simple “dial” selection of feed-thru opening size
for up to 1⁄ 2" pull rope.
• Can use pull rope and True Tape™ conduit measuring tape simultaneously.
• 115 V AC, 23 A; Power Consumption 2.65 kw.
• Specifications: max. 4 psi; 150 cfm; 3 motors (11⁄ 2 hp each).

Part #

Description

B60

JetLine® Super Blower™ Conduit Fishing System

Weight
56 lbs

System Includes:
Part #

Description

Weight I.D. # Part #

Description

Weight I.D. #

B3000

Power Unit

34 lbs

1

F400B

Line Carrier for 3", 31⁄ 2", 4" conduit

.1 lb

5

126025*

25' x 21⁄ 2" Heavy-duty Hose

12 lbs

2

M5000

5" Plastic Line Carrier

.4 lb

6

B26

Large Dial-A-Line™ Seal-Off Body

.7 lb

3

M6000

6" Plastic Line Carrier

.5 lb

7

BV24

Seal-Off for 21⁄ 2" - 6" conduit

3.3 lbs

4

*Order catalog number 901152 to replace hose cuff end as necessary.

66

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Super Blo-Vac™ System

1

This rugged blower/vacuum system handles 1⁄ 2" to 6" conduit.
• Blows or vacuums most debris and water from conduit runs.
• High-impact, lightweight polypropylene construction
will not rust or dent.
• Compartments can be unlatched and separated.
Recovery compartment capacity expandable to 9 gallons
by using bottom tool storage compartment.
• 10" diameter metal hubbed wheels allow mobility.
• Complete package includes patented
Dial-A-Line™ Seal-offs, Inflatable®
line carriers, foam line carriers,
Power Saver™ and Tag-Along™ line
packages. All accessories store neatly
in self-contained tool storage compartment.

15

8

14
2

13
7

16

5, 6
12

• Three-stage blower/vacuum motor delivers
up to 25% more power for longer runs and
faster operation.

9
10

• 115 V AC, 13 A, 141⁄ 4" x 161⁄ 2" x 39 3⁄ 4"

11

3, 4, 17, 18, 19

20

• Specifications: max. 5 psi; 95 cfm; 21⁄4 hp; 134" vacuum.

Part #

Description

BV208DA

Super Blo-Vac™ Power Conduit Fishing System

Weight
63 lbs

System Includes:
Part #

Description

Weight I.D. # Part #

Description

Weight I.D. #

1525

Cart

25 lbs

1

Short Seal-off for 1⁄ 2" - 11⁄ 4" conduit

.1 lb

11

JV12

Seal-off for 11⁄ 4" - 21⁄ 2" conduit

.3 lb

2

JV09

Long Seal-off for 1⁄ 2" - 11⁄ 4" conduit

.1 lb

12

LP3200B (5) 200' Line Pkgs for 3⁄ 4" conduit

.9 lb

3

B26

Large Dial-A-Line™ Seal-off Body

.7 lb

13

LP4200

1.6 lbs

4

BV23

Seal-off for 11⁄ 4" - 21⁄ 2" conduit

.3 lb

14

5

BV24

Seal-off for 21⁄ 2" - 6" conduit

3.3 lbs

15

LP2207T (2) 800' Line Pkgs for 1 ⁄ 4" or larger conduit 1 lb

6

BV1281

Crevice Tool (for clean-up)

.1 lb

16

JV210

Filter Bag (for vacuuming)

.1 lb

7

LP2150

(10) 150' Line Pkgs for 1⁄ 2" conduit

.8 lb

17

12568

8' x 11⁄ 2" Heavy-duty Hose

3.3 lbs

8

LP3450

(5) 450' Line Pkgs for 3⁄ 4" conduit

1.4 lbs

18

BV12

Hose Adapter (to Dial-A-Line™ body)

.1 lb

9

LP4450

(5) 450' Line Pkgs for 1" conduit

.8 lb

19

JV07

Dial-A-Line™ Seal-off Body

.2 lb

10

FC1-10

(1 ea) Foam Line Carriers for 1⁄2" - 4" conduit 1 lb

20

(5) 200' Line Pkgs for 1" conduit

LP2206T (2) 400' Line Pkgs for 11⁄ 4" or larger conduit .6 lb
1

JV08

15' x 11⁄ 2" heavy-duty hose available. Order Part #125615.

Super Blo-Vac™ Specifications
Vacuum* (inches of waterlift) 134"
Maximum Air Pressure*

5 psi

Electrical Rating

120 V AC, 13.8 A

Type of Motor

By-pass

Number of Impeller Stages

3

Recovery Capacity**

9 gallons

Net Weight

55 lbs

Height w/Cart

41"

Motor Brush Life

750 hours

Tool Storage
Compartment

* Will vary with voltage and atmospheric conditions
@ sealed vacuum.
** When using Recovery Compartment and Tool
Storage Compartment together.

67

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Conduit Installation Guide
• Powr-Pak II™ 5-lb Basic System (JO25CA + 1103N) Page 72
• Powr-Pak I™ 5-lb Portable System (JO25) Page 72
• PowrHouse™ System with 20-lb CO2 (JO225LC + 1208) Page 71
• PowrHouse™ System with 50-lb CO2 (JO225LC + 950) Page 71
The following chart illustrates typical conduit installation. Fewer bends and lighter pull lines can increase
the maximum distances obtainable. The chart below refers to a typical run with (4) 90° bends and no
obstructions or leaks, using JetLine® PL232 Pull Line (200-lb test) and foam line carriers.
Conduit
Size

1

⁄ 2"

3

⁄ 4"

1"
11⁄ 4"
11⁄ 2"
2"
21⁄ 2"
3"
31⁄ 2"
4"
5"
6"

68

Conduit Run Length
100'

150'

200'

Over
300'

400'

500'

600'

700'

800'

900'

1,000'

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Powr House™ Conduit Fishing Systems
For 1⁄ 2" to 6" conduit.
• Completely self-contained with no electrical power source required. Use 50 lb
cylinder as source for refilling smaller cylinders (requires RV5 refill connector).

Accessories included
with JO225LC
21

22

20
14

15

• Quick, easy setup.
• Metered operating valve controls CO2 volume to minimize waste and
maximize safety.

13

18

19

17

16

6

• Locking pull ring prevents accidental discharge.
• 1" tank thread.

9

• Specifications: 840 psi @ 70 °F.

7
8

Part #

Description

Weight

JO225LC

Powr House™ Conduit Fishing System without CO2 Cylinder

40 lbs

950

50 lb CO2 Cylinder (full) (JO250 only)

161 lbs

1208

20 lb CO2 Cylinder (full) (JO220 only)

58 lbs

11

12

10

1

2

4

JO225LC & 950
(50 lb Cylinder)

JO225LC Powr House™
CO2 System w/o Cylinder

J0225LC & 1208
(20 lb Cylinder)

5
3

Contents Included in JO225LC:
Part #

Description

Description

Weight I.D. #

1105A*

12' Valve Assembly with UG12 hose only

Weight I.D. # Part #
3.6 lbs

1

FC1

Foam Line Carrier for 1⁄ 2" conduit

.1 lb

1215

Seal-off for 1⁄ 2" - 1" conduit with 2' hose

.4 lb

2

FC2

Foam Line Carrier for 3⁄ 4" conduit

.1 lb

14

1142

Angle Adapter (for 1215 Seal-off)

.1 lb

3

FC3

Foam Line Carrier for 1" conduit

.1 lb

15

1216

Seal-off for 11⁄ 4" - 21⁄ 2" conduit with 2' hose

.8 lb

4

FC4

Foam Line Carrier for 11⁄ 4" conduit

.1 lb

16

5.2 lbs

5

FC5

Foam Line Carrier for 11⁄ 2" conduit

.1 lb

17

11

13

1206

Seal-off for

LP2150

(10) 150' Line Pkgs for 1⁄ 2" conduit

1.3 lbs

6

FC6

Foam Line Carrier for 2" conduit

.1 lb

18

LP3200

(5) 200' Line Pkgs for 3⁄ 4" conduit

.8 lb

7

FC7

Foam Line Carrier for 21⁄ 2" conduit

.1 lb

19

LP3300

(5) 300' Line Pkgs for 3⁄ 4" conduit

1.1 lbs

8

FC8

Foam Line Carrier for 3" conduit

.1 lb

20

LP4300

(5) 300' Line Pkgs for 1" conduit

1.1 lbs

9

FC9

Foam Line Carrier for 31⁄ 2" conduit

.1 lb

21

LP2206T

(3) 400' Line Pkgs for 11⁄ 4" or larger conduit .6 lb

10

FC10

Foam Line Carrier for 4" conduit

.1 lb

22

LP2207T

(3) 800' Line Pkgs for 11⁄ 4" or larger conduit .6 lb

11

FC11

Foam Line Carrier for 5" conduit

.1 lb

NS

LP2208T

(3) 600' Line Pkgs for 11⁄ 4" or larger conduit .9 lb

12

FC12

Foam Line Carrier for 6" conduit

.1 lb

NS

⁄ 2" - 6" conduit

*Order UG12 for hose only. Order UG121112 for hose and coupling assembly.

NS=Not Shown

69

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Powr-Pak I™ 5-lb Portable System

1

For 1⁄ 2" to 21⁄ 2" conduit.
• Exclusive from Gardner Bender.
• Lightweight, portable system
requires no electrical power.

2

• Metered operating valve controls
volume, preventing waste.

7
6

• 5 lb cylinder can be refilled from
larger cylinder using
#RV5 refill connector.

10

4

5

8

• Locking pull ring prevents
accidental discharge.

15

9

14

• 3⁄ 4" NGA tank thread.

11

12

13

• Specifications: 840 psi @ 70 °F.
Part #

Description

Weight

JO25

Powr-Pak I™ Portable CO2 Conduit Fishing System

16 lbs

JO25A

Powr-Pak I™ Portable CO2 Conduit Fishing System w/out Cylinder

10 lbs

System Includes:
Part #

Description

Weight I.D. # Part #

Description

Weight I.D. #

1103N

5-lb-capacity CO2 Cylinder w/valve (full)

18 lbs

1

F125B

(4) Line Carriers for 3⁄ 4" - 11⁄ 2" conduit

.6 lb

9

1102

Shoulder Strap

.4 lb

2

F250B

(2) Line Carriers for 11⁄ 2" - 21⁄ 2" conduit

.6 lb

10

1215

2' hose seal-off for 1⁄ 2" - 1" conduit

.4 lb

4

LP2150

(10) 150' Line Pkgs for 1⁄ 2" conduit

1.3 lbs

11

1142

Angle Adapter (for 1215 Seal-off)

.1 lb

5

LP3200

(5) 200' Line Pkgs for 3⁄ 4" conduit

.8 lb

12

1216

2' hose seal-off for 11⁄ 4" - 21⁄ 2" conduit

.8 lb

6

LP4300

(5) 300' Line Pkgs for 1" conduit

1.1 lbs

13

RV5

Refill Connector (with 1137 Cone)

.8 lb

7

LP1701B 1000' Nylon Bulk Line

1 lb

14

FC1

(5) Foam Line Carriers for 1⁄ 2" conduit

.1 lb

8

LP1702B 2000' Nylon Bulk Line

1 lb

15

Powr-Pak II™ 5-lb Basic System

3

For 1⁄ 2" to 1" conduit.
• Same Powr-Pak™ 5-lb cylinder with basic accessories.
1

• Unit can be expanded with other accessories.

2

• 3⁄ 4" NGA tank thread.
• Includes convenient portable caddy.

Part #

Description

JO25CA

10 lbs
Powr-Pak II™ Portable CO2 Conduit
Fishing System w/out Cylinder
5-lb Capacity CO2 Cylinder w/valve (full) 18 lbs

1103N

Weight I.D. #

9

NS

5

4

10

1

11

12

NS=Not Shown

6

7

8

System Includes:

70

Part #

Description

Weight I.D. # Part #

Description

1102

Shoulder Strap

.4 lb

2

LP4300

(5) 300' Line Pkgs for 1" conduit

1.1 lbs

1505

Caddy w/ Tool Box

5.8 lbs

3

LP1703

1400' Nylon Bulk Line

.9 lb

9

1215

Seal-off for 1⁄ 2" - 1" conduit with 2' hose

.4 lb

4

FC1

Foam Line Carrier for 1⁄ 2" conduit

.1 lb

10

1142

Angle Adapter (for 1215 Seal-Off)

.1 lb

5

FC2

Foam Line Carrier for 3⁄ 4" conduit

.1 lb

11

1.3 lbs

6

FC3

Foam Line Carrier for 1" conduit

.1 lb

12

.8 lb

7

1⁄ 2"

LP2150

(10) 150' Line Pkgs for

LP3200

(5) 200' Line Pkgs for 3⁄ 4" conduit

conduit

Weight I.D. #
8

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

CO2 Refill Connector
Connection for refilling CO2 cylinders.
• Flexible urethane hose with quick disconnects.
• Saves time.
Part #

Description

Weight

RV5

CO2 Cylinder Refill Connector

.8 lb

Air Compressor Seal-Off
Use with most commercial air compressors to blow pull line into
conduit or duct. For use with 2" to 6" conduit sizes.
• The Dial-A-Line™ feature is incorporated into the compressor fitting.
• Maximum 200 cfm rating.
• Shut-off valve.
Use in 21⁄ 2" - 6" conduit only. To avoid rapid pressure
build-up, do not use on smaller sizes of conduit.
Part #

Description

Weight

CB21V

Air Compressor Seal-off

6 lbs

1

⁄ 2" N.P.T.
(AM-2)
Air Coupler

Sold as complete assembly only.

The Inflatables® Line Carriers
F600

For 3⁄4" to 6" conduit.
• Each inflatable line carrier adjusts to fit the conduit; four items
cover a range of eleven diameters of rigid, IMC, EMT, PVC or
flexible conduit, or single-bore duct.
• Heavy-gauge waterproof woven nylon assures long life.
Part #

Qty

Description

F125

5/bx

The Inflatables® Line Carrier for 3⁄ 4", 1" & 11⁄ 4" conduit

Weight
.6 lb

F250

5/bx

The Inflatables® Line Carrier for 11⁄ 2", 2" & 21⁄ 2" conduit

.6 lb

F400

2/bx

The Inflatables® Line Carrier for 3", 31⁄ 2" & 4" conduit

.3 lb

F600

2/bx

The Inflatables® Line Carrier for 5" & 6" conduit

.3 lb

F250

F400

F125 not pictured.

M6000

Missile Line Carriers

M5000
M4000

For 2" to 6" conduit.
• Fast blowing and vacuuming of 2" to 6" diameter conduit by
low-friction plastic carriers.
• Easily removed from conduit if stuck or jammed.
Part #

Qty

Description

Weight

M2000

1/bg

Missile Line Carrier for 2" conduit (w/rope eye)

.1 lb

M3000

1/bg

Missile Line Carrier for 3" conduit (w/rope eye)

.3 lb

M4000

1/bg

Missile Line Carrier for 4" conduit (w/rope eye)

.3 lb

M5000

1/bg

Missile Line Carrier for 5" conduit (w/rope eye)

.4 lb

M6000

1/bg

Missile Line Carrier for 6" conduit (w/rope eye)

.5 lb

M2000

M3000

71

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Foam Line Carriers

FC10

FC9
FC8

For 1⁄2" to 6" conduit.
• Cleans water and debris from most conduit – rigid, EMT,
IMC, PVC or flexible.
• Durable for indefinite re-use.
FC3
Part #

Qty

Description

Weight

FC1

10/bx

Foam Line Carrier for 1⁄ 2" conduit

.3 lb

FC2

10/bx

Foam Line Carrier for 3⁄ 4" conduit

.3 lb

FC3

10/bx

Foam Line Carrier for 1" conduit

.4 lb

FC4

10/bx

Foam Line Carrier for 11⁄ 4" conduit

.4 lb

FC5

5/bx

Foam Line Carrier for 11⁄ 2" conduit

.3 lb

FC6

5/bx

Foam Line Carrier for 2" conduit

.4 lb

FC7

5/bx

Foam Line Carrier for 21⁄ 2" conduit

.6 lb

FC8

5/bx

Foam Line Carrier for 3" conduit

.6 lb

FC9

2/bx

Foam Line Carrier for 31⁄ 2" conduit

.5 lb

FC10

2/bx

Foam Line Carrier for 4" conduit

.6 lb

FC11

2/bx

Foam Line Carrier for 5" conduit

.8 lb

FC12

2/bx

Foam Line Carrier for 6" conduit

.8 lb

FC2

FC1

FC6
FC5

FC7
FC4

FC11 & FC12 not pictured.

Power Saver™ Line Packages

LP4450

LP3450

For 1⁄ 2" to 1" conduit.
LP3300

• Carrier and pull line included in a single, handy package.
Line is dispensed smoothly and quickly as line carrier
moves through conduit.

LP4300

• No knots to tie, no foam carriers to retrieve.
LP2150

• Color coded packages indicate line diameter.

Description

Breaking
Length Color Strength Weight

Part #

Qty

LP2150

50/bx Power Saver™ Line Package for 1⁄ 2" conduit

150'

Red

17 lbs

.8 lb

LP3300

25/bx Power Saver™ Line Package for 3⁄ 4" conduit

300'

Yellow 17 lbs

.8 lb

LP3450

25/bx Power Saver™ Line Package for 3⁄ 4" conduit

450'

Yellow 17 lbs

.8 lb

LP4300

25/bx Power Saver™ Line Package for 1" conduit

300'

White 17 lbs

.8 lb

LP4450

25/bx Power Saver™ Line Package for 1" conduit

450'

White 17 lbs

.8 lb

Tag-Along™ Line Packages

LP2208T
LP2207T

1

For 1 ⁄ 4" to 6" conduit.
• Handles longer runs with less energy.
• Line is dispensed as package moves through conduit
attached to line carrier.

LP2206T

• Works with foam or inflatable line carriers.

72

Description

Length

Breaking
Strength Weight

Part #

Qty

LP2206T

10/bx Tag-Along™ Pull Line Package

400'

22 lbs

LP2207T

10/bx Tag-Along™ Pull Line Package

800’

22 lbs

1.1 lbs

LP2208T

10/bx Tag-Along™ Pull Line Package

600’

22 lbs

.9 lb

.6 lb

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Heavy-Duty Bulk Nylon Line
Doubles as general-purpose line for layout of suspended
ceilings, plumb-lines and masonry construction.

LP1722

• Use with line carriers for any size conduit.
• All packages are center-dispensing (except #LP1707).

Description

Length

Breaking
Strength

Part #

Qty

LP1701

6/bx Heavy-duty Bulk Nylon Line

1000'

100 lbs

Weight
2.5 lbs

LP1722

6/bx Heavy-duty Bulk Nylon Line

2200'

90 lbs

6.3 lbs
LP1701

Poly-Pull™ Series Pull Line

PL235

Super high strength – up to 500 lbs breaking strength.
• Self-lubricated polyolefin line lasts for years; will not rust,
rot or mildew.
• Center-dispensing box pays out line smoothly.
• Blow directly into conduit using Dial-A-Line™ Seal-off bodies.

Part #

Description

PL102

Poly-Twine™ Pull Line

Breaking Outside
Length Strength Diameter Color
6500'

Weight

190 lbs

1

⁄ 8"

Yellow

13 lbs

Yellow

14 lbs

PL102B

Poly-Twine™ Pull Line in bucket

6500'

190 lbs

1⁄ 8"

PL232B

Poly-Pull™ Line in bucket

6500'

210 lbs

1⁄ 8"

Blue tracer 11 lbs

PL235

Poly-Pull™ Line in dispenser box

2200'

500 lbs

3⁄ 16"

Red tracer 15 lbs

PL235B

Poly-Pull™ Line in bucket

2200'

500 lbs

3

Red tracer 16 lbs

⁄ 16"

PL232B

Conduit Measuring Tape
Blow or vacuum through the run to estimate wire length or to
locate obstructions.
• Strong and durable.
• Breaking strength of 165 lbs.
• Mildew and rot-resistant.

Part #

Description

Dimensions

Weight

ST40

Super True Tape™ Measuring Tape

2750' Roll x 1⁄ 4" wide

3.6 lbs

73

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

UpperHand™ Fish Tape
GB’s series of UpperHand™ fish tapes has improved traditional hand fishing with
the first ergonomic fish tape in the industry. The improved design is manufactured
with impact-resistant ABS and Nylon™ resins and includes
a full, wrap-around interior ring to increase durability. The UpperHand™
series is backed by an industry leading 5-year limited warranty.
• Exclusive Ergonomic Handle reduces wrist strain.
• Exclusive Comfort Formed Grip reduces forearm strain.
• Exclusive cushioned Rubber Hand Grips for ease of
operation and comfort (certain models).
• Impact Modified Handle and Housing that exceeds
the 25 ft drop-test.
• Plated Steel Wire resists corrosion (certain models).

A Tape for Every Job
Standard Carbon Steel
Tried-and-true, tough and economical solution for wire pulling.
Corrosion-Resistant Plated Carbon Steel (R series)
The toughest, most durable tape for long-lasting use.
Non-Conductive Fiberglass Core with Nylon Jacket
Exclusive non-conductive tip and unique flat
SEE PG
shape is easier to feed yet able to pull
75
up to 500 lbs.

FOR MORE INFO ON

Fish Tape Winder

Five Year
Warranty

Drop Test Results
25'

20'
FTN-100R
Tape Length

100'

Tape Material

Fiberglass Core

FTS-65R
65'

FTS-125R
125'

FTS-250R

GB - UpperHand™

Competitive
Models

250'

Corrosion-Resistant Plated Carbon Steel

15'

w/ Nylon Jacket
Pkg Qty
Handle / Housing Material
Tape Dimensions

1/card
Nylon / ABS
w/ rubber grips

1/card

1/card

Nylon / ABS
Nylon / ABS
w/ rubber grips w/ rubber grips

1/card

10'

Nylon / ABS
w/ rubber grips

TBD

TBD

TBD

TBD

Weight

2.99 lbs

3.0 lbs

5.2 lbs

8.2 lbs

Internal / External Ring Dia.

51⁄ 2" / 12"

4" / 81⁄ 2"

51⁄ 2" / 12"

51⁄ 2" / 12"

5'

Tested to withstand a
25'' drop

Ergonomic Handle
Reduces fatigue and wrist strain by allowing the
user to keep their wrist in a natural position

74

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

UpperHand™ Rewind™ Fish Tape Winder
New UpperHand™ Rewind™ Fish Tape Winder GB’s new two-piece
winding solution that is easier to use than any other manual winding
system available. The Rewind™ works on all 100', 125' and 250'
UpperHand™ fish tapes.
• Designed exclusively for UpperHand™ fish tapes.
• Molded tabs Snap into the UpperHand™ housing to firmly secure.
• 3⁄ 8 " Drive Socket fits standard ratchet.
• Over-molded Rubber Hand Grip on Ratchet.
improves operation and comfort.
• High-Impact ABS Construction withstands
drops of greater than 25'.
• Fits the following UpperHand™ Fish Tape models:
- FTS-125

- FTS-125R

- FTS-250
SEE PG

- FTS-250R - FTN-100R

74

FOR MORE INFO ON

UpperHand™
Fish Tapes

Attaches Easily
No tools are needed – just turn the handle and snap into place.
No other winder is as easy to use!
Reduces Strain/Improves Productivity
Efficient ratcheting feature saves arm movements –
and time on the job.
Keeps Tape Smooth
Easy, steady retrieval maintains tape’s original shape
for long-lasting use.

Part #

Pkg Qty

Description

FTW-10

1/card

Rewind™ Fish Tape Winder

Cable Snake™ Steel Fish Tape
Rugged, ergonomically-designed steel fish tape.
• Comfortable handle made of impact-resistant plastic.
• Handle will not pop-out.
• Largest opening and gripping surface in the industry.
• GB exclusive trigger design cleans tape and provides
constant tension during retrieval.
• Tape is wound directly into housing. No need to “snap”
retaining tapes.
• Wire has clean lubricating properties to prevent rust.
• Maximum design strength 500 lbs.
• Fish tape ball helps guide through tricky bends.
• Patented.
Part #

Description

Weight

FTS-100GR 120' x 1⁄ 8" x .0625" Cable Snake™

4.6 lbs

FTS-200GR 240' x 1⁄ 8" x .0625" Cable Snake™

7.2 lbs

75

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Streamline™ Steel Fish Tape

FTS-50B

Setting the industry standard for quality and dependability.
• Tape is wound directly into housing; no need to “snap”
retaining tapes; no sticky residue inside housing.
• Form-fitting finger grips around reel fit the hand comfortably.
• Shatter-proof reel stands up to on-the-job abuse.
• Four viewing ports on reel show how much tape remains.
• Easy disassembly for fast replacement of tape.
• Maximum design strength 500 lbs.

Part #

Description

End Type Reel Dia.

FTS-50B

50' x 1⁄ 8" x .045" Fish Tape

Curled

Weight

81⁄ 2"

2.3 lbs

Cable Snake™ Steel Fish Tape
Perfect for short runs installing electrical boxes, outlets,
lighting fixtures, doorbells and security systems.
• Compact design houses 25' of tape and fits in tool
box or on tool belt.
• Flat wire steel tape fishes down walls, under carpets
and over ceilings.
• Wedge-shaped tip prevents hang-up.
• Low-memory tape does not curl during extension perfect for non-conduit situations.
• Formed handle fits easily in hand.
• Compact tape rewind knob for quick wind-up.
EFT-21P

76

Part #

Description

Weight

EFT-21P

25' Cable Snake™ Fish Tape

1.10 lbs

Standard fish tape used
for conduit
High memory tape curls when
extended not allowing fishing
through walls

25' Cable Snake™
Low memory tape does not curl
when extended, making it ideal
for fishing overhead or
through walls

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Replacement Fish Tape
Replacement tape FTS series.
RTX-100

• Durable flat steel tapes in 1⁄ 8" and 1⁄ 4" widths.
RTX-200

Part #

Description

Fits Housing Number

Weight

RTS-50B

50' x 1⁄ 8" x .045" Steel

FTS-50B

1.2 lbs

RTS-100

100' x 1⁄ 8" x .060" Steel

FTS-100CE, FTS-100GR

3.0 lbs

RTS-200

200' x 1⁄ 8" x .060" Steel

FTS-200CE, FTS-200GR

5.6 lbs

RTX-100

100' x 1⁄ 4" x .060" Steel

FTX-100

5.8 lbs

RTX-200

200' x 1⁄ 4" x .060" Steel

Bulk (no housing)

11 lbs

RTS-50B
RTS-100

Economy Fish Tape
Economical 50' tape.
• Standard steel material.
• View port in reel allows user to see amount of tape used.

Part #

Description

EFT-50B

50' x 1⁄ 8" x .045" Fish Tape

Reel Dia.

Weight

7"

1.8 lbs

Fiberline™ Non-Conductive Fiberglass Fish Tape
For use in telecom, electrical, wall and floor conduit, walker duct
and utility installations.
• Fiberglass non-conductive properties for safer pushing/pulling
in occupied duct and panel boxes.
• Inner feed design for quick payout and rewind.
• Rust and corrosion resistant, superior pulling strength, will not kink.
• High visibility in crowded conduit.
• Fish tape eye accommodates #10 wire.
• Repair kit keeps parts handy.
• FiberLine™ Hand Puller protects fiberglass rod while pulling.
Works on most competitive fiberglass fish tapes.
• Maximum design strength 250 lbs.
FTF-200
Part #

Description

Weight

FTF-200

200' FiberLine™ w/ 3⁄16" rod

18 lbs

*FTRK-20 Repair Kit Available

77

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Nylo-Flex™ Non-Conductive Nylon Fish Tape
NYD-100

Non-conductive fish tape – light and flexible.

NYD-50

• Designed for use in conduit with existing wires
or cables.
• Glides through 1⁄ 2" to 4" conduit.
• High-strength nylon tape tested at 300 lbs average
tensile strength.
• Shatterproof reel is virtually indestructible; features
no-slip, form-fitting finger grips.
• Four viewing ports on reel show how much tape remains.

JLP10
JLP5

• 6-inch spiral wound metal leader with pulling eyelet
included (attached).
• Tape diameter is 3 ⁄ 16".

Part #

Description

Weight

NYD-50

50' Nylo-Flex™ Non-conductive Fish Tape Housing

1.2 lbs

NYD-100

100' Nylo-Flex™ Non-conductive Fish Tape Housing

2.2 lbs

JLP5

50' Non-conductive Replacement Tape (coil only)

1 lb

JLP10

100' Non-conductive Replacement Tape (coil only)

1.5 lbs

Fish Tape Ball
Eye holds 7 #10, 12 #12 or 19 #14 bare wires.
• Attaches directly to most 1⁄ 8" x .0625" steel fish tapes.
• Maximum design strength 500 lbs.
Part #

Description

Weight

FTB-10

Fish Tape Ball

.06 lb

Fish Tape Leader
Multi-Flex™ is a flexible, non-kink, round metallic leader perfect—for flat steel tapes.
• Double-sheathed to prevent unraveling. Brass plated for corrosion resistance.
• Spring Coil easily curves around bends, yet is rigid enough to fish smoothly through
conduit with existing wire.
• High strength – tested at 400 lb tensile strength.
• Attaches directly to 1⁄ 8" tapes, adapts to fit 1⁄ 4" tapes.
FTL-5

78

Part #

Description

Weight

FTL-5

Fish Tape Leader, Multi-Flex™

.5 lb

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Fish Ease™ 12' Fish Sticks
• 3 durable interlocking fiberglass rods extend up to 12'.
(4' sections).
• 1⁄ 4" diameter ensures rigidity when extended.
• 2 different threading tips provided for a variety of applications.

Part #

Description

Dimensions

Weight

FTX-12L

Fish Ease™ 12' Fish Sticks

3 4' sections x 1⁄ 4"

1 lb

Glo Fish™ 15' Glow in the Dark Fish Sticks
• 3 interlocking fiberglass rods extend up to 15'.
• Made from luminescent fiberglass to make fishing through
walls or over ceilings easier.
• 1⁄ 4" diameter ensures rigidity when extended.

Part #

Description

Dimensions

FTX-15GL

Glo Fish™ 15' Fish Sticks

3 4' sections x

Weight
1⁄ 4"

1 lb

79

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Mini-Brutus™ Cable Puller
Gardner Bender introduces the new
Mini Brutus™ 2,000 pound pulling
system. With the PT2000M power drive,
the CP2000M is an all-in-one light to
medium duty cable puller. When removed,
the power drive can also be used as a
pipe threader (adapters not provided).
Durable square tubular steel frame
construction prevents buckling and
the welded steel base improves
stability. Multi-position adjustable
arm increases versatility and allows
cable pulls from any direction.
Self-contained, compact design
sets up in minutes and is perfect for pulls
in small panels or tight locations.

Optional Power
Drive Shown

• Rated for pulls up to 2,000 pounds.
• Self-contained design for quick setup and takedown.
• Adjustable arm fully extends to 70".
• Extended height to 9' 8" for convenience.
• 44" x 131⁄ 2" x 18" collapsible frame for portability and easy storage.
• 51⁄ 2" wheels to improve jobsite portability.
• Pulls loads up to 18' per minute to avoid wire installation damage.
• Two-part urethane baked-on paint to resist chipping and rust.
• Metal case provided for Power Drive and components.
Part #

Description

CP2000

Mini-Brutus™ Cable Puller Frame

CP2000M

Mini-Brutus™ Cable Puller w/ Motor & Components

PT2000M

Power Drive Kit for CP2000 & CP2000M

Stored Position (CP2000)

PT2000M
CP2000M Includes:
Part #
Description

80

CP2000

Mini-Brutus™ Cable Puller Frame

PT2000M

Power Drive Kit

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Brutus™ Powered Puller
Pulls up to 8,000 lbs.
• Exclusive planetary gear design lets powerhead deliver
smooth, sure power without breakage.
• 30% more pulling force than competitors’ models.
• Versatile frame mounts power head almost anywhere.
• Frame assembles in numerous configurations.
• No chains or sprockets to break.

Typical exposed
conduit pull set up

• Powerful 11⁄ 2 hp motor starts under full load. Capstan is
non-reversing with backstop brake. Will not reverse when
power is shut off.
• Load read-out meter indicates pulling load at all times; alerts
operator to hung-up cable or other excessive conditions.
• Two-way power head mounting adapts to tight corners.
• Pulls 10 feet/minute without buckling or bending.
• Heavy-duty metal case included.

Typical concealed
conduit pull set up

• Min 15 A, Max 30 A.
Part #

Description

Weight

CP8000

Brutus™ Powered Puller for exposed
or concealed conduit

355 lbs

CP8000 Includes:
Part #

Qty Description

Weight

I.D. #

CP800

1

Power Head

60 lbs

1

CP503

3

2' Chain Assembly

3 lbs

4

CP505

5

8" Lock Pins

7 lbs

5

CP601

1

Conduit Frame Adapter

55 lbs

6

S-8512

3

12" Sheave

7 lbs

7

CP622

3

10" Lock Pins

3 lbs

8

CP631

1

Boom Extension

18 lbs

9

CP701

1

Puller Base Extension

25 lbs

10

CP702

1

Coupling Clamp

8 lbs

11

CP703

1

Adjustable Pipe Adapter

22 lbs

12

CP706

1

3" Conduit Coupling

5 lbs

13

CP707

1

31⁄ 2" Conduit Coupling

4 lbs

14

CP708

1

4" Conduit Coupling

3 lbs

15

CP709

1

6" Lock Pin

2 lbs

16

HS-8512

1

12" Cable Sheave with Hook

20 lbs

17

CM20

1

Metal Case with CM44 Casters

133 lbs

18

Weight
60 lbs

I.D. #
1

18
7
12

17
7

6

11

16

9

8

1
5
14
13

10

4

15

CP8000

CP8000D Includes:
Part #
CP800

Qty Description
1 Power Head

CP503

2

2' Chain Assembly

3 lbs

4

CP505

3

8" Lock Pins

7 lbs

5

CP601

1

Conduit Frame Adapter

55 lbs

6

S-8512

1

12" Sheave

7 lbs

7

CM20

1

Metal Case with CM44 Casters

133 lbs

18
3

CP8001 Includes:
Part #

Qty Description

1

Weight

I.D. #

CP800

1

Power Head

60 lbs

1

CP80*

1

Floor Mount Kit (on following page)

33 lbs

3

*Complete with 43⁄ 4" x 51⁄ 2" concrete wedge anchors.

CP8001

81

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Brutus™ Powered Puller Sub-Assembly Kits
May be purchased as additions to existing cable-puller sets.
1
Part #

Description

Weight Part #

Qty Description

CP800 Power Assembly 110 lbs CP801
CP80*

Floor Mount Kit

33 lbs

CP600 Conduit Frame & 72 lbs
Sheave Adapter
Assembly

CP630 Boom
Extension Kit

22 lbs

CP700 Puller Base
Extension Kit

94 lbs

Weight

I.D. #

1

Power Head

60 lbs

1

1

Base Mounting Bracket

50 lbs

2

CP80

1

Floor Mount w/ Anchors 65 lbs

3

CP503

2

2' Chain Assembly

3 lbs

4

CP505

3

8" Lock Pins

7 lbs

5

CP601

1

Conduit Frame Adapter 55 lbs

6

S-8512

1

12" Sheave

7 lbs

7

CP622

3

10" Lock Pins

3 lbs

8

CP631

1

Boom Extension

18 lbs

9

CP503

1

2' Chain Assembly

3 lbs

10

CP505

2

8" Lock Pins

7 lbs

11

S-8512

1

12" Sheave

7 lbs

12

CP701

1

Puller Base Extension

25 lbs

13

CP702

1

Coupling Clam

8 lbs

14

CP703

1

Adjustable Pipe Adapter 22 lbs

CP706

1

3" Conduit Coupling

5 lbs

16

CP707

1

31⁄2" Conduit Coupling

4 lbs

17

CP708

1

4" Conduit Coupling

3 lbs

18

2
CP800

15
3
CP80

*Complete with 43⁄ 4" x 51⁄ 2" concrete wedge anchors.

6

13
12

15

9
16
4

18
10
11

8

17

7

14

5
CP600

CP700

CP630

Optional Equipment

9

May be purchased as additions to existing cable-puller sets.
Part #

Description

Weight

CP709

6" Lock Pin

2 lbs

1

CP1002

Rope Steel Stand (For 300' Rope)

12 lbs

2

7

6

I.D. #

HS-8512

12" Cable Sheave with Hook

20 lbs

3

CM16

Metal Case with CM 44 Casters

133 lbs

–

RST-7530

Double Braided Rope (3⁄ 4" x 300' spool)

54 lbs

–

RST-7560

Double Braided Rope (3⁄ 4" x 600' spool)

109 lbs

–

CP10

Load Readout (meter only CA1064001)

3 lbs

4
5

CP15

Foot Switch for Remote Operation

4 lbs

CP504

6' Chain Assembly

6 lbs

6

CP704

2" Conduit Coupling

7 lbs

7
8

CP705

21⁄ 2" Conduit Coupling

6 lbs

CP806

Capstan (standard) 10'/min.

7 lbs

–

CP807

Capstan (large diameter) 12'/min.

11 lbs

9

8

4
5

3

2

tip:

For maximum
performance and safety,
use only original GB rope.

82

SEE PG

88

FOR MORE INFO ON

Rope

1

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Brutus™ Application Instructions

2

1

Different positions

4

Pulling horizontally

5

Puller suspended using vertical pull

7

Conduit frame adapter with sheave
chained to exposed conduit

3

Puller suspended using horizontal pull

6

Underground pulling

Vertical–pulling up

8

9

Power head assembly being attached
to conduit frame adapter using two
lock pins

Pulling up cable with conduit frame
adapter chained to exposed conduit –
mounted flush

83

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Brutus™ Application Instructions

10

Conduit frame adapter chained to
conduit (over the extension resting
on floor) pulling down

13

Conduit frame adapter chained to
exposed conduit – pulling down

16

Conduit frame adapter chained to
conduit – pulling up

84

11

Coupling threaded onto conduit.
Coupling clamp locked to coupling
with two thumb screws

14

Downward pull – conduit frame
adapter chained to conduit extension

17

Power head assembly chained to 6"
conduit with two 90° bends pulling
from underground conduit using cable
sheave with hook

12

Conduit frame adapter resting on
floor and on back of box – pulling up

15

Upward pull – conduit frame adapter
chained to conduit extension

18

Resting conduit frame adapter on
floor over conduit and pulling up

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Brutus™ Application Instructions

19

Resting conduit frame adapter on floor
and blocks over conduit and pulling up

22

Use boom extension to obtain
extra cable length for splicing

20

Pulling additional cable from junction
box (1) down to junction box (2) using
cable sheave with hook and power
head assembly chained to pole

23

Conduit frame adapter and power head
assembly chained to conduit (over
extension) pulling down from box on ceiling

21

Conduit frame adapter chained to
conduit extension in pull box – pulling
vertically from underground

24

Pulling from 90° connector to obtain
leads long enough to complete
connection in junction box

25

Conduit frame adapter and power
head assembly chained separately
to conduit, pulling from a ceiling pull
box for additional cable

85

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Hook Sheaves
Suspends cable overhead and reduces strain on pulling equipment.
• Keeps cable together for easier manageability and enables
direction of cable to be changed.
• Sheave made of rugged aluminum alloy. Hook frame made
of welded steel.
• Rated at 8,000-lb capacity.
HS-8512
Part #

Description

Width

Dia.

Weight Hook Only

Weight

Sheave Only Weight

HS-8512

Hook Sheave

5"

12"

20 lbs

H-8512

13 lbs

S-8512

7 lbs

HS-8518

Hook Sheave

5"

18"

30 lbs

H-8518

20 lbs

S-8518

10 lbs

HS-8524

Hook Sheave

5"

24"

43 lbs

H-8524

29 lbs

S-8524

14 lbs

HS-8518

HS-8524

Wire & Cable-Pulling Tension Meter
Monitors tension throughout the pull to prevent over-stressing
cable. Perfect for use with powered pullers.
• Self-contained hydraulically-operated meter measures in
200-lb increments up to 10,000 lbs maximum capacity.
• Maximum-indicating pointer helps read
pre-selected loads.

E

1/2"-13UNC

5/8"-11UNC

A

• ± 2% accuracy.

F

G

D

• Comes with certificate of calibration.
C
B

• Minimum Reading 1,000 lbs; Increments 200 lbs.
Part #

Description

Capacity

TM5

Tension Meter

10,000 lbs

A

B

C

D

E

F

4.75" 9.75" 9.29" 2.00" 3.69" .88"

G

Weight

.75" 9 lbs

Wire-Aide™ Wire-Pulling Lubricant
Slides on smoothly and clings throughout the pull. Modified
wax-base formula dries to a slippery film.
• Greaseless, non-toxic compound will not stain skin, clothing
or construction trim; cleans up quickly with soap and water.
• Stable and safe to use. Withstands normal temperature
extremes and will not dry out in the container.
Non-combustible, non-conductive and non-corrosive.
• Will not damage conduit or insulation.
• Remains stable with multiple freeze-thaw cycles.
• Suitable for fiber-optic wire.

79-003
79-006

Part #

Container Size

Weight

79-002

1 gal. Pail

9 lbs

79-003

5 gal. Pail

42 lbs

79-006

1 qt. Squeeze Bottle

2 lbs

Wire-Aide™ Specifications

86

Base

Wax, modified

Staining Properties

Non-staining to hard surfaces

Color

Yellow

Removal

Soap and hot water

Viscosity

Heavy cream-like paste

Abrasion Protection Excellent

pH

Approx. 6.5 - 7.0

Cling Ability

Excellent

Freezing Point

28° F

Water Resistance

Repels water to some extent

Freeze-Thaw Stability OK/3 cycles

Hardening Charac.

Non-hardening

Lubricity

Excellent

Condition on Drying Waxy-film

Shelf Life

Indefinite

Flash Point

Corrosion Test

Non-corrosive to metals

Non-combustible

79-002

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Poly-Gel™ Cable-Pulling Lubricant
Perfect for all types of insulation and conduit, including fiber-optic
cable, cable with low-density, linear low-density polyethylene,
polyurethane and semi-conducting jackets.
• Clean, clear gel, water-based for easy cleanup.
Non-staining and non-toxic.
• Dries to a clear, non-conductive film for easy handling,
stripping and terminating of cable. Will not gum up
or harden on conduit.
• Easy and versatile to use. Apply manually or with pump.
• Workable over wide temperature range:
- Poly-Gel™ +28 °F to +200 °F
- All Season Poly-Gel™ -10 °F to +180 °F

79-203
79-202

79-201
Part #

Description

Container Size

Weight

79-201

Poly-Gel™

1 qt. Squeeze Bottle

2.5 lbs

79-202

Poly-Gel™

1 gal. Pail

8.75 lbs

79-203

Poly-Gel™

5 gal. Pail

42 lbs

79-301

All Season Poly-Gel™

1 qt. Squeeze Bottle

2.5 lbs

All Season Poly-Gel™ Specifications

Poly-Gel™ Specifications
Base

Poly-oxyethylene/Water

Base

Color

Blue

Color

Polyethylene polymer
Lime Green

Viscosity

Thick Clear Gel

Viscosity

Heavy gel-like paste

pH

7.2 - 8.2

pH

Approx. 6.5 - 7.5

Freezing Point

28 °F

Freezing Point

-10 °F

Freeze-Thaw Stability

Excellent

Freeze-Thaw Stability

OK/3 cycles

Lubricity

Excellent

Lubricity

Excellent

Shelf Life

Indefinite

Shelf Life

Indefinite

Corrosion Test

Non-corrosive

Corrosion Test

Non-corrosive to metals

Staining Properties

Non-staining

Staining Properties

Non-staining to hard surfaces

Removal

Soap and water

Removal

Soap and Water

Cling Ability

Excellent

Cling Ability

Excellent

Condition on Drying

Semi-fluid film

Condition on Drying

Lubricious film

Flash Point

Non-combustible

Flash Point

Non-combustible

87

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Super-Slick™ Cable-Pulling Lubricant
Exclusive GB Micro Bead Formula rolls cable through the
longest pulls.
• Lowest pulling tension. This GB lubricant innovation combines
a lubricating agent with microbeads that act as miniature ball
bearings to raise the cable off the conduit surface. Cable
literally rolls through the run, reducing friction by an additional
30% compared to regular lubricants.
• Adheres throughout long pulls. Creates a slick film that will not
rub off or dry out on long pulls or re-pulls.
• Requires up to 45% less lubricant per foot than regular
lubricants, actually reducing cable-pulling costs.
• Stable under temperature extremes of 28 °F to 200 °F and
withstands repeated freeze-thaw cycles.
• Harmless to skin and safe for the environment. Non-toxic, nonflammable and non-corrosive to all conduit types. Easily cleans
up with water and will not stain clothing.
• Universally compatible with all cable types and jacket materials,
including low-density and linear low density polyethylene,
polyurethane and semi-conducting jackets.

79-403
79-401

79-402

Part #

Container Size

79-401

1 qt. Squeeze Bottle

Weight
2.5 lbs

79-402

1 gal. Jug

8.75 lbs

79-403

5 gal. Pail

42 lbs
1
2
3

Super Slick™ Specifications
Base

Water

Staining Properties

Non-staining

Color

White

Removal

Water Rinse

Viscosity

2100 cps@ 50 rpm Abrasion Protection

4
5

Excellent

pH

6.0 - 8.0

Cling Ability

Excellent

Freezing Point

30.2 °F

Hardening Charac.

Non-Hardening

Freeze-Thaw Stability Excellent

Condition on Drying Slick Film

Lubricity

Excellent

Flash Point

Shelf Life

Indefinite

Non-Combustible

1. Micro Beads
2. Shear-sensitive carrying agent
with suspended lubricating oil
3. Cable
4. Thin film of lubricating oil
5. Conduit wall

Super Tuff-Pull™ Double Braided Rope
The toughest, strongest pulling rope available.
Double-braided 100% polyester construction, delivers
the highest working loads and tensile strength at
every diameter.
• Super abrasion resistance for longer life.
• Low stretch, high strength characteristics result from
exclusive manufacturing process which carefully
controls yarn tension during braiding. Torque-free,
non-rotating, non-kinking performance due to
double-braided construction for ease of handling — wet or dry.
• Weather resistant. Will not rot or mildew.
• The 3 ⁄ 4" diameter rope includes a factory-spliced eye on both ends.
Part #

Size

Working Load*

Weight

RST-5030

1⁄ 2"

x 300'

3,500 lbs

30 lbs

RST-5060

1⁄ 2"

x 600'

3,500 lbs

61 lbs

RST-7530**

3

⁄ 4" x 300'

8,000 lbs

54 lbs

RST-7560**

3

8,000 lbs

109 lbs

⁄ 4" x 600'

* Working loads are based on use with GB Cable Pullers and
for the purpose of pulling wire through conduit.
** Preferred for Brutus™ 8,000-lb Cable Puller.

88

Super Tuff-Pull™ is constructed of
a jacket braided over a braided
core. Double braided construction
entirely shields one of the two
ropes from abrasion.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Tuff-Pull™ Single Braided Rope
Toughest, strongest single-braided rope available.
Constructed of 12 strands of 100% polyester fibers
braided over and under each other in a circular pattern.
• Non-rotating, non-kinking performance due to braided
construction (unlike ordinary twisted rope) makes
handling easy.
• Low stretch, high strength characteristics result from
tension-controlled braiding process.
• Weather-resistant. Will not rot or mildew.
• The 3⁄ 4" diameter rope includes a factory-spliced eye on both ends.
Part #

Size

Working Load

Weight

RTP-3830

3

1125 lbs

14 lbs

RTP-5030

1⁄ 2"

x 300'

2125 lbs

21 lbs

RTP-7530

3

⁄ 4" x 300'

4500 lbs

58 lbs

⁄ 8" x 300'

tip:

Vary rope application.
Reverse the rope,
end-for-end. Alternate the lay of the
rope around capstan and sheaves.
Store rope in clean dry area,
preferably on well-ventilated racks.
Keep rope away from chemical
contact or fumes.
Avoid exposing rope to extreme
heat in excess of 140 °F.

Tuff-Pull™ is constructed of
12 strands of polyfibers braided
over and under each other in a
circular direction.

Poly-Pro™ General Purpose Rope
Strong, durable, lightweight polypropylene general purpose rope
for manual wire pulling and general construction applications
(barrier rope, tie downs, tow rope, etc.).
• Resistant to mildew, rot and chemical action.
Part #

Size

Working Load

Weight

RGP-2525

1

113 lbs

4 lbs

RGP-2560

1

113 lbs

9 lbs

RGP-3825

3

270 lbs

10 lbs

RGP-3860

3

270 lbs

23 lbs

RGP-5025

1

420 lbs

18 lbs

RGP-5060

1⁄ 2"

420 lbs

37 lbs

420 lbs

66 lbs

⁄ 4" x 250'
⁄ 4" x 600'
⁄ 8" x 250'
⁄ 8" x 600'
⁄ 2" x 250'
x 600'

RGP-50120 1⁄ 2" x 1200'
RGP-7530

3⁄ 4"

x 300'

1100 lbs

44 lbs

RGP-7560

3⁄ 4"

x 600'

1100 lbs

81 lbs

! WARNING

Not recommended for
powered cable pulling.

89

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Rope Selection

Rope Usage

1. Select the proper rope for the job.

1. Always check all fittings, splices, connectors,
etc. before using rope.

Always choose a strong, durable rope with limited
elasticity and long service life. The material, tensile
strength and recommended working load are
critical factors.

a. Working Load Rating represents the maximum
pulling load to which the rope should be
subjected. It increases with rope diameter and
is calculated for rope in good condition with
appropriate splices under normal service.
Note: Working load guidelines are void under
conditions of rapid or sudden load changes.
Super Tuff-Pull™ & Tuff-Pull™

Strength

Poly-Pro™

b. Tensile Strength is the average breaking point
of new, unused rope. It gives some indication of
the rope’s ability to withstand sudden or shock
loads. Tensile strength decreases over time as
the rope is used and should not be relied upon
as an indication of working strength.
Super Tuff-Pull™ & Tuff-Pull™

Elasticity

2. Do not stand directly in line with rope
under tension.
! WARNING

All synthetic rope under load will recoil if it, or a
fitting (chain, hook, bolt, etc.) fails. The snap-back
action will propel the rope - and any still attached
metal fittings – at high speed. Serious injury to
persons or property in the vicinity is possible.

Danger Zone
Line of Pull
Danger Zone

3. Do not overload the rope.

Handle loads slowly and smoothly to avoid sudden
strains or shock loads which can exceed the rope’s
breaking strength. Such dynamic loading occurs when
a load is picked up, stopped, moved or swung and may
subject the rope to two or three times its normal
working load.

Poly-Pro™

tip:

Polyester ropes such as Tuff-Pull™
and Super Tuff-Pull™ are preferred
for cable pulling because of their low
elasticity, high strength and endurance.

90

2. Inspect the rope thoroughly before each use.

4. Avoid abrasive conditions.

Avoid using rope that shows signs of wear, such
as frayed ends, broken yarns or pulled strands.

Rough surfaces and sharp edges can severely
damage rope. Do not pull rope over sharp bends
or angles. Make sure chocks, capstans, sheaves
and pulleys are free of burrs and rust and rotate
freely. Keep rope surface clean. Do not drag it over
rough ground; dirt and grit will work into and cut
inner fibers.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Handy-Saver™ Reel Roller
Durable roller base that permits fast, easy loading and re-loading.
• 3000 lb capacity per pair.
• Slanted ramp permits fast, easy loading and unloading.
• Five roller slot adjustments set for wide range of reel diameters;
no limit on reel widths.
• Epoxy-coated solid steel platform withstands heavy use.
• For 15" to 30" diameter reels.
• Dimensions: 26"L x 111⁄ 4"W x 41⁄ 2"H.
Part #

Description

Weight

WRR-100

Handy Saver™ Reel Roller (1 ea.)

48 lbs

30" Reel Roller
Holds reels up to 30" diameter; 2000 lb capacity.
• Five roller slot adjustments to fit reel diameter.
• Epoxy-coated solid steel platform with handy loading/
unloading ramp.
• Dimensions: 331⁄ 2"L x 261⁄ 2"W x 41⁄ 2"H.
Part #

Description

Weight

WRR-300

30" Reel Roller

50 lbs

Replacement Parts
Part #

Description

Weight

WRR100259

Side Roller

1 lb

WRR1002513 Cotter Pin

.5 lb

Telescoping Reel Jacks
Easily set up in minutes to dispense or take up wire, cable, rope or hose.
• Adjustable jack height accommodates various reel sizes.
• Roller bearings on jack permit smooth reel rotation.
• High-strength steel construction holds up to 5000-lb reel.
Part #

Dimensions

Jack Height
Range

Reel Capacity
Size
Weight

TRJ-56

141⁄ 2"L x 15"W

13" to 28"

28" to 56" 2500 lbs. (ea.)

25 lbs

TRJ-96

24"L x 16"W

22" to 54"

46" to 96" 2500 lbs. (ea.)

49 lbs

Insert spindle through
center of reel.

Place reel jacks under
each end of spindle,
aligning roller bearings
with spindle grooves,
and raise one jack until
reel end clears floor.

Weight

Raise opposite jack
until spindle is level.

91

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Hand Wire Caddy
Convenient hand carrying or dispensing of small quantities of
reeled wire.
• Rugged construction from 5⁄ 8", .083 steel tubing, epoxy-coated
to reduce chipping and peeling.
• Holds up to eight reels, each 7" diameter by 5" wide, or four reels,
each 7" diameter by 6" to 10" wide.
Part #

Description

WSP-100E Hand Caddy

Dimensions

Weight

221⁄ 2" L x 131⁄ 2" W x 91⁄ 2" H

6 lbs

Portable Wire Caddy
Maximum flexibility to dispense six 500' spools of #6 to #10
AWG or twelve 7" diameter by 5" wide wire reels at the
same time.
• Durable welded square-tube steel frame to stand up to tough
job-site applications.
• WSP-115 model comes with wire guide and casters.
Part #

Description

Dimensions

Weight

WSP-115

Wire Caddy with Casters

16" L x 26" W x 201⁄ 2" H

8 lbs

WSP-115

Spool Caddy Cart
Transport and dispense reels of building wire, coaxial and
multi-conductor cables.
• Hand Caddy WSP-100E is included. The caddy is easily
attached to and detached from cart for maximum capacity
and flexibility.
• Constructed of heavy-duty, steel tubing holds up to 300 lbs.
• Semi-pneumatic steel wheels are much more durable than
plastic wheels.

WSP-140 Assembled

• Special patented channel allows up to two hand caddies to
attach to cart.

92

Part #

Description

WSP-140

Spool Caddy w/ WSP-100E 22" L x 16" W x 43" H

Dimensions

Weight
27 lbs

WSP-140
Unassembled

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Deluxe Spool Cart & Caddy Combo
WSP-145 combines Deluxe Spool Cart (WSP-144) and
Hand Caddy (WSP-100) for maximum capacity and
flexibility in storing and transporting wire reels.
• Hand Caddy is easily attached to and detached from cart
using special, patented channel.
• Holds up to 23 500' spools or two 2,500' spools.
• Constructed of heavy-duty steel tubing holds up to 400 lbs.
Durable semi-pneumatic wheels.

WSP-144

• WSP-144 offers five spool holders that attach in six
positions to hold reel/spool combinations:
- Ten - 23 reels, each 5" - 7" diameter and 5" - 10" wide
- Four reels, each 10" - 12" diameter, 7" wide
- Two reels, each 15" - 18" diameter, 14" wide
Part #

Description

Dimensions

Weight

WSP-144

Deluxe Spool Caddy

22" L x 181⁄ 2" W x 43" H

28 lbs

Heavy-Duty Spool Cart & Caddy
Expander Combo
WSP-155 combines Heavy-Duty Spool Cart (WSP-150)
and Heavy-Duty Caddy Expander (WSP-50) for storing
and transporting up to 21 500' spools or four 2,500' spools.
• Constructed of heavy-duty steel tubing, holds up to 700 lbs.
• Shock-absorbing, semi-pneumatic wheels mounted on
ball bearing steel rims with easy-service grease fittings.
WSP-150

• Dispenses THHN, THW, Romex® and other materials
from horizontal or vertical position.
• Two wire guide feeders permit wire feed in
any direction.
• WSP-150 has a versatile carrying capacity. Holds
four reels each 10" diameter x 15" wide, or three
reels, each 12" - 14" diameter, or two reels each
12" - 15" diameter x 15" wide or one 24" diameter
reel 15" wide.
Part #

Description

Dimensions

Weight

WSP-150

Heavy-Duty Spool Caddy

22" L x 181⁄ 2" W x 45" H

60 lbs

Wire Dispenser
Capacity to handle ten 2500' spools up to 18" diameter.
• Swivels a full 360° on the base.
• All-steel construction.
• Base has two fixed and two swivel locking casters.
• Spindles are mounted at an angle to keep wire reels in proper
payout position.
• Easily rolls through standard 36" door opening.
Part #

Description

Dimensions

Weight

WCM-10

Wire Dispenser

363⁄ 8" L x 313⁄ 8" W x 591⁄ 4" H

155 lbs

Romex® is a registered trademark of Southwire Company, Carrollton, GA

93

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Wire Caddy Replacement Parts
• Replacement parts for Gardner Bender wire caddies.
WSP144050

WSP144251
Part #

Description

WSP144050

Spool Caddy Bars 18" L

WSP-144, WSP-140

5

1.5 lbs

WSP144010

Hex Head Bolt

WSP-144

2

.5 lb

WSP144251

R-Clips

All Caddies

10

.5 lb

WSP144253

Wheels

WSP-144

2

5 lbs

WSP144254

Axle Caps

WSP-144

2

.5 lb

WSP-150, WSP-155

1

4 lbs

WSP1502517 Spool Caddy Bars 20" L

For Wire Cart:

Qty

Weight

Portable Wire Dispenser
• Unique patented design makes carrying boxed or coiled wire easy.
Dispenser spins wire straight and flat.
• Adjustable flexible legs fit all sizes of wire coils or boxes.
• Stores coils up to 50 lbs or 250' Romex®.

94

Part #

Description

Dimensions

Weight

740

Portable Wire Dispenser

175⁄ 8" Dia; 131⁄ 2" H

4 lbs

WSP144253

HOLE MAKING

98

101

103

From single parts to complete kits,
Gardner Bender has versatile, durable

106

hole-making products that contractors
depend on.

107

95

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Slug-Out™ Knockouts
35 Ton Hydraulic Punch . . . . . . . . . . . . .102
Draw Studs . . . . . . . . . . . . . . . . . . .104-105
Hydraulic Slug-Out™ Sets . . . . . . . . . .97-98
Individual Components . . . . . .101, 104-105
Mechanical Slug-Out™ Sets . . . . . . .99-100
Notching Pliers . . . . . . . . . . . . . . . . . . . .102
Super Stainless Steel
Slug-Out™ Sets . . . . . . . . . . . . .103, 106
Stud Punch . . . . . . . . . . . . . . . . . . . . . . . .106
Step Bits . . . . . . . . . . . . . . . . . . . . . . . . . .107

96

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Slug-Out™ Hydraulic Knockout Sets

28

Punches holes for 1⁄ 2" to 4" conduit in distribution boxes,
electrical panels or troughs.

27

21

• Four point design allows slug to drop automatically
without splitting.

27

• Punches up to 10-gauge mild steel and 12-gauge
stainless steel.

24

• Hand or foot operation; choose hand or foot-powered
hydraulic pump.

22

23
25

• Assortment of punches, dies and accessories.
• Includes metal storage case (111⁄ 8" x 183⁄ 4" x 61⁄ 4").
13&14

15&16

17&18

19&20

• Competitors’ punches and dies are interchangeable.
26

5&6

1&2
3&4
Part #

Description

9&10
7&8

11&12

Weight

KOH14A

Hydraulic Slug-Out™ Set w/o punches and dies and with PH20 Hand Pump

27 lbs

KOF520

1⁄ 2"

40 lbs

KOH520A

1⁄ 2"

- 2" Hydraulic Slug-Out™ Set with PH20 Hand Pump

31 lbs

KOF540

1⁄ 2"

- 4" Hydraulic Slug-Out™ Set with PF65 Foot Pump

59 lbs

KOH540A

1⁄ 2"

- 4" Hydraulic Slug-Out™ Set with PH20 Hand Pump

50 lbs

- 2" Hydraulic Slug-Out™ Set with PF65 Foot Pump

KOH14A Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

Description

Hole Weight I.D. #

PH20

Hand Pump - 2 speed

–

5 lbs

22

CH1211

12-ton Hydraulic Cylinder

–

6 lbs

26

2.5 lbs

23

H864

6' Rubber Hose Coupler

–

2 lbs

27

–

.2 lb

24

CM5

Metal Case

–

11 lbs

28

–

.4 lb

25

Description

KPR7540 Drawstud for 3⁄4" - 4" Punches & Dies –
KPS50*

Stainless Steel Pull Rod, 3⁄ 8" dia.

KC3540** Converter

KOF520 & KOH520A Sets Include:
Part #

Description

Hole

Weight I.D. # Part #

Hole

Weight I.D. #

KP500B

1

7

.4 lb

1

KP2000B 2" Punch

23⁄ 8"

2 lbs

11

KD500B

1

7

1 lb

2

KD2000B 2" Die

23⁄ 8"

2 lbs

12

KP750B

3

13⁄ 32" .4 lb

3

PF65

Foot Pump (KOF520 only)

–

12 lbs

21

KD750B

3

13⁄ 32" 1 lb

4

PH20

Hand Pump - 2 speed (KOH520A only) –

5 lbs

22

KP1000B 1" Punch

111⁄ 32" 1 lb

5

KPR7540 Drawstud for 3⁄4" - 4" Punches & Dies –

KD1000B 1" Die

111⁄ 32" 1 lb

6

KPS50*

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

KP1500B 11⁄ 2" Punch

115⁄ 16" 2 lbs

KD1500B 11⁄ 2" Die

115⁄ 16" 2 lbs

⁄ 2" Punch

⁄ 8"

⁄ 2" Die

⁄ 8"

⁄ 4" Punch
⁄ 4" Die

2.5 lbs

23

–

.2 lb

24

KC3540** Converter

–

.4 lb

25

CH1211

12-ton Hydraulic Cylinder

–

6 lbs

26

9

H864

6' Rubber Hose Coupler

–

2 lbs

27

10

CM5

Metal Case

–

11 lbs

28

Stainless Steel Drawstud, 3⁄ 8" dia.

KOF540 & KOH540A Sets Include:
Part #

Description

Hole

Weight I.D. # Part #

Description

Hole

Weight I.D. #

KP500B

1⁄ 2"

7⁄ 8"

.4 lb

1

KP3000

3" Punch

31⁄ 2"

4 lbs

KD500B

1

7

1 lb

2

KD3000

3" Die

31⁄ 2"

4 lbs

16

KP750B

3⁄ 4"

13⁄ 32" .4 lb

3

KP3500

31⁄ 2" Punch

4"

4 lbs

17

KD750B

3

Punch

⁄ 2" Die
Punch

⁄ 8"

15

13⁄ 32" 1 lb

4

KD3500

31⁄ 2" Die

4"

4 lbs

18

KP1000B 1" Punch

111⁄ 32" 1 lb

5

KP4000

4" Punch

41⁄ 2"

4 lbs

19

KD1000B 1" Die

111⁄ 32" 1 lb

6

KD4000

4" Die

41⁄ 2"

4 lbs

20

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

PF65

Foot Pump (KOF540 only)

–

12 lbs

21

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

PH20

Hand Pump - 2 speed (KOH540A only) –

5 lbs

22

KP1500B 11⁄ 2" Punch

115⁄ 16" 2 lbs

9

KPR7540 Drawstud for 3⁄4" - 4" Punches & Dies –

KD1500B 11⁄ 2" Die

115⁄ 16" 2 lbs

10

KPS50*

KP2000B 2" Punch

23⁄ 8"

2 lbs

11

KC3540** Converter

KD2000B 2" Die

23⁄ 8"

2 lbs

12

CH1211

12-ton Hydraulic Cylinder

⁄ 4" Die

Stainless Steel Drawstud, 3⁄ 8" dia.

2.5 lbs

23

.2 lb

24

–

.4 lb

25

–

6 lbs

26

–

KP2500

21⁄ 2" Punch

27⁄ 8"

3 lbs

13

H864

6' Rubber Hose Coupler

–

2 lbs

27

KD2500

21⁄ 2" Die

27⁄ 8"

3 lbs

14

CM5

Metal Case

–

11 lbs

28

* Must be used with 1⁄ 2" punch and die.

** Must be used with 31⁄ 2" - 4" punch and die.

97

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Slug-Out 90™
1

⁄ 2" to 2" conduit size.

• Right-angle head swivels 360° for
flexible punching in tight work spaces.

11&12

9&10

• Punches up to 21⁄ 2" conduit sizes,
up to 10-gauge mild steel and
12-gauge stainless steel.

7&8
5&6

• No cumbersome “spacers” required.

1&2

3&4

13

1

• Compact, lightweight size: 7 ⁄ 2 pounds and 13" in length.
• Operating pressure rated at 10,000 psi.
• Set includes the most popular draw studs, punches, and
dies for punching holes for 1⁄ 2" to 2" conduit all packed in a
sturdy storage case.

15
16

Part #

Description

Weight

KOS5290

Self-contained Hydraulic Slug-Out 90™ Set

15 lbs

14

Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

KP500B

1⁄ 2"

Punch

7⁄ 8"

.4 lb

1

KP1500B 11⁄ 2" Punch

Description

Hole

115⁄ 16" 2 lbs

9

KD500B

1⁄ 2"

Die

7⁄ 8"

1 lb

2

KD1500B 11⁄ 2" Die

115⁄ 16" 2 lbs

10

KP750B

3⁄ 4"

Punch

13⁄ 32" .4 lb

3

KP2000B 2" Punch

23⁄ 8"

2 lbs

11

KD750B

3⁄ 4"

Die

13⁄ 32" 1 lb

4

KD2000B 2" Die

23⁄ 8"

2 lbs

12

KP1000B 1" Punch

111⁄ 32" 1 lb

5

KLP6

–

10 lbs

13

KD1000B 1" Die

111⁄ 32" 1 lb

6

KPR7520 Drawstud

–

1 lb

14

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KPS50

Drawstud

–

.2 lb

15

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

KSA50

Drawstud Adapter

–

.3 lb

16

Hydraulic Driver

Weight I.D. #

Seal Repair Kit KLP6K1

Slug-Out™ Self-Contained Hydraulic Knockout Set
17

1

⁄ 2" to 2" conduit size.

• Hydraulic driver punches up to 10-gauge mild steel and
up to 12-gauge stainless steel.
• Four-point design allows slug to drop automatically
without splitting.

13

• Lightweight and easy to use.
1&2

• Hydraulic driver operates in any position.
14

Optional 21⁄ 2" and 3" punch and die available.

15
16
1&2

Part #

Description

Weight

KOS520

Slug-Out™ Self-contained Hydraulic Set

14 lbs

3&4

5&6

7&8

9&10

11&12

Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

KP500B

1⁄ 2"

7⁄ 8"

.4 lb

1

KD1500B 11⁄ 2" Die

115⁄ 16" 2 lbs

10

KD500B

1

7

1 lb

2

KP2000B 2" Punch

23⁄ 8"

2 lbs

11

KP750B

3

13⁄ 32" .4 lb

3

KD2000B 2" Die

23⁄ 8"

2 lbs

12

KD750B

3

13⁄ 32" 1 lb

4

KLP2

–

10 lbs

13

KP1000B 1" Punch

111⁄ 32" 1 lb

5

KPR7520 Drawstud

–

1 lb

14

KD1000B 1" Die

111⁄ 32" 1 lb

6

KPS50

Drawstud

–

.2 lb

15

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KSA50

Drawstud Adapter

–

.3 lb

16

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

K88020

Metal Storage Case

–

4.1 lbs

17

KP1500B 11⁄ 2" Punch

115⁄ 16" 2 lbs

9

Punch

⁄ 2" Die
⁄ 4" Punch
⁄ 4" Die

Seal Repair Kit KLP2K1

98

⁄ 8"

Description

Hydraulic Driver

Hole

Weight I.D. #

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Quick Hand Ratchet Slug-Out™

17

11&12
9&10

1

⁄ 2" to 2" conduit size.

• Four-point design allows slug
to drop automatically
without splitting.

7&8

• Smooth operating ratchet
handles up to 10-gauge
mild steel and 12-gauge
stainless steel.

5&6
1&2

3&4
14

15
13

16
Part #

Description

Weight

KOR520

Slug-Out™ Ratchet Set

16 lbs

KOR14

Ratchet (without punch and dies)

12 lbs

KOR520 Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

Description

Hole

KP500B

1⁄ 2"

Punch

7⁄ 8"

.4 lb

1

KD1500B

11⁄ 2" Die

115⁄ 16" 2 lbs

10

KD500B

1⁄ 2"

Die

7⁄ 8"

1 lb

2

KP2000B

2" Punch

23⁄ 8"

2 lbs

11

KP750B

3⁄ 4"

Punch

13⁄ 32" .4 lb

3

KD2000B

2" Die

23⁄ 8"

2 lbs

12

KD750B

3⁄ 4"

Die

13⁄ 32"

1 lb

4

KOR14

Ratchet

–

12 lbs

13

KP1000B 1" Punch

111⁄ 32" 1 lb

5

KOR50

1

–

.4 lb

14

KD1000B 1" Die

111⁄ 32" 1 lb

6

KOR75125 3⁄ 4" - 11⁄ 4" Screw Adapter

–

1 lb

15

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KOR152

11⁄ 2" - 2" Screw Adapter

–

1 lb

16

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

K88020

Metal Storage Case

–

4 lbs

17

KP1500B 11⁄ 2" Punch

115⁄ 16" 2 lbs

9

⁄ 2" Screw Adapter

Weight I.D. #

Slug-Out™ Set With Ratchet Wrench
1

⁄ 2" to 2" conduit size.

• Four-point design allows slug to drop automatically
without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Set includes ratchet wrench, six sizes of punches and
dies, and two drive screws all packaged in a rugged
storage case.

16

9&10
5&6

Part #

Description

Weight

KOW520

Mechanical Slug-Out™ Set w/ KW52 Wrench

12 lbs

11&12

15
13

3&4

1&2

14

8

7

Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

KP500B

1⁄ 2"

Punch

7⁄ 8"

.4 lb

1

KP1500B 11⁄ 2" Punch

115⁄ 16" 2 lbs

9

KD500B

1⁄ 2"

Die

7⁄ 8"

1 lb

2

KD1500B 11⁄ 2" Die

115⁄ 16" 2 lbs

10

KP750B

3⁄ 4"

Punch

13⁄ 32" .4 lb

3

KP2000B 2" Punch

23⁄ 8"

2 lbs

11

KD750B

3

13⁄ 32" 1 lb

4

KD2000B 2" Die

23⁄ 8"

2 lbs

12

KP1000B 1" Punch

111⁄ 32" 1 lb

5

KW52

Hand Ratchet Wrench

–

1 lb

13

KD1000B 1" Die

111⁄ 32" 1 lb

6

KSB50B

1⁄ 2"

Bearing & Drive Screw

–

1 lb

14

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KS752B

3⁄ 4"

- 2" Bearing & Drive Screw

–

1 lb

15

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

K88007

Storage Case

–

1.5 lbs

16

⁄ 4" Die

Description

Hole

Weight I.D. #

99

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Slug-Out™ Set for 1/2" to 11⁄4" conduit size

7&8

Four-point design allows slug to drop automatically without splitting.

11

• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Set includes the four most popular sizes of punches and dies
packed in a sturdy storage case.

5&6
9

Part #

Description

Weight

KOM50125

Mechanical Slug-Out™ Set

3 lbs

10
1&2

4
3

Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

KP500B

1

7

.4 lb

1

KP1250B 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KD500B

1

7

1 lb

2

KD1250B 11⁄ 4" Die

111⁄ 16" 2 lbs

8

KP750B

3

13⁄ 32" .4 lb

3

KSB50B

1

–

1 lb

9

KD750B

3

13⁄ 32" 1 lb

4

KS752B

3

–

1 lb

10

KP1000B 1" Punch

111⁄ 32" 1 lb

5

K88004

Storage Case

–

1.5 lbs

11

KD1000B 1" Die

111⁄ 32" 1 lb

6

⁄ 2" Punch
⁄ 2" Die
⁄ 4" Punch
⁄ 4" Die

⁄ 8"
⁄ 8"

Description

Hole

⁄ 2" Bearing & Drive Screw
⁄ 4" - 2" Bearing & Drive Screw

Weight I.D. #

Slug-Out™ Set for 11⁄2" to 2" conduit size
Four-point design allows slug to drop automatically without splitting.

6

• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Durable storage case.

Part #

Description

Weight

KOM152

Mechanical Slug-Out™ Set

4 lbs

5
2

3&4

1

Set Includes:
Hole

Weight I.D. # Part #

KP1500B 11⁄ 2" Punch

115⁄16"

2 lbs

1

KD2000B 2" Die

KD1500B 11⁄ 2" Die

115⁄16"

2 lbs

2

KS752B

KP2000B 2" Punch

23⁄8"

2 lbs

3

K88001

Part #

Description

Description

Hole

Weight I.D. #

23⁄8"

2 lbs

4

3

–

1 lb

5

Storage Case

–

1.5 lbs

6

⁄ 4" - 2" Bearing & Drive Screw

Slug-Out™ Assortment Kit for 21⁄2" to 4" conduit size
Expand capability of 1⁄ 2" - 2" sets.
• Four-point design allows slug to drop automatically without splitting.

9

• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Packed in metal storage case.
3&4
5&6

7&8
Part #

Description

Weight

KOH2540

Slug-Out™ Set in Metal Case

22 lbs
1

2

Set Includes:

100

Part #

Description

Hole

Weight I.D. # Part #

Description

Hole

KP2500

21⁄ 2" Punch

27⁄ 8"

3 lbs

1

KD3500

31⁄ 2" Die

4"

Weight I.D. #
4 lbs

6

KD2500

21⁄ 2" Die

27⁄ 8"

3 lbs

2

KP4000

4" Punch

41⁄ 2"

4 lbs

7

KP3000

3" Punch

31⁄ 2"

4 lbs

3

KD4000

4" Die

41⁄ 2"

4 lbs

8

KD3000

3" Die

31⁄ 2"

4 lbs

4

K88008

Metal Storage Case

–

5 lbs

9

KP3500

31⁄ 2" Punch

4"

4 lbs

5

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Individual Punch & Die Slug-Out™
1

KOM300 Apart

⁄ 2" to 4" conduit size.

• A complete selection of 11 individual punch,
die and drive screw sets from 1⁄ 2" - 4".
• Four-point design allows slug to drop
automatically without splitting.

KOM300 Assembled

• Punches up to 10-gauge mild steel and 12-gauge
stainless steel.

Part #

Weight

KOS-500B

1.5 lbs

Pipe Size
1

KOS-750B

1.5 lbs

3

KOS-1000B

1.8 lbs

KOS-1250B

1.75 lbs

11⁄ 4”

111⁄ 16”

KP1250B

2 lbs

KD1250B

2 lbs

–

–

KOS-1250DS

1.8 lbs

11⁄ 4"

111⁄ 16"

KP1250B

2 lbs

KD1250B

2 lbs

KS752B

1 lb

KOS-1500B

1.8 lbs

11⁄ 2”

115⁄ 16”

KP1500B

2 lbs

KD1500B

2 lbs

–

–

KOS-1500DS

1.9 lbs

11⁄ 2"

115⁄ 16"

KP1500B

2 lbs

KD1500B

2 lbs

KS752B

1 lb

KOM1732

3 lbs

–

17⁄ 32"

KP1732B

.3 lb

KD1732B

.3 lb

KS752B

1 lb

KOM200

2 lbs

2"

23⁄ 8"

KP2000B

2 lbs

KD2000B

2 lbs

KS752B

1 lb

KOM250

4 lbs

21⁄ 2"

27⁄ 8"

KP2500

3 lbs

KD2500

3 lbs

KSN2530

1.5 lbs

KOM300

5 lbs

3"

31⁄ 2"

KP3000

4 lbs

KD3000

4 lbs

KSN2530

1.5 lbs

KOM350

10 lbs

31⁄ 2"

4"

KP3500

4 lbs

KD3500

4 lbs

KSN3540

4 lbs

KOM400

11 lbs

4"

41⁄ 2"

KP4000

4 lbs

KD4000

4 lbs

KSN3540

4 lbs

KKT316

Keyway Tool (for use with KOM1732)

⁄ 2"

Hole Size Punch #
7

⁄ 8"

KP500B

Weight

Die #

Weight

Drive Screw #

Weight

.4 lb

KD500B

1 lb

KSB50B

1 lb

⁄ 4"

13⁄ 32"

KP750B

.4 lb

KD750B

1 lb

KS752B

1 lb

1"

111⁄ 32"

KP1000B

1 lb

KD1000B

1 lb

KS752B

1 lb

Individual Slug-Out™ Components
1

⁄ 2" to 4" conduit size.

• Four-point design allows slug to drop automatically without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
Part #

Description

Hole Size

Weight

KP500B

1

7

.4 lb

⁄ 2" Punch

⁄ 8"

KD500B

1

7

1 lb

KSB50B

Drive Screw for 1⁄ 2" Punch & Die

–

1 lb

KP750B

3

13⁄ 32"

.4 lb

KD750B

3

13⁄ 32"

1 lb

KS752B

Drive Screw for 3⁄ 4" thru 2" Punch & Die

–

1 lb

⁄ 2" Die
⁄ 4" Punch
⁄ 4" Die

⁄ 8"

KP1000B

1" Punch

111⁄ 32"

1 lb

KD1000B

1" Die

111⁄ 32"

1 lb

KP1250B

11⁄ 4" Punch

111⁄ 16"

2 lbs

KD1250B

11⁄ 4" Die

111⁄ 16"

2 lbs

KP1500B

11⁄ 2" Punch

115⁄ 16"

2 lbs

KD1500B

11⁄ 2" Die

115⁄ 16"

2 lbs

KP1732B

17⁄ 32" Punch

17⁄ 32"

2 lbs

KD1732B

17

7

1 ⁄ 32"

2 lbs

KP2000B

2" Punch

23⁄ 8"

2 lbs

KD2000B

2" Die

23

⁄ 8"

2 lbs

KP2500

21⁄ 2" Punch

27⁄ 8"

3 lbs

KD2500

21⁄ 2" Die

27⁄ 8"

3 lbs

KSN2530

Drive Screw for 21⁄ 2" & 3" Punch & Die

–

1.5 lbs
4 lbs

⁄ 32" Die

KP3000

3" Punch

31⁄ 2"

KD3000

3" Die

31⁄ 2"

4 lbs

KP3500

31⁄ 2" Punch

4"

4 lbs

KD3500

31⁄ 2" Die

4"

4 lbs

KSN3540

Drive Screw for 31⁄ 2" & 4" Punch & Die

–

4 lbs

KP4000

4" Punch

41⁄ 2"

4 lbs

KD4000

4" Die

41⁄ 2"

4 lbs

KEYWAY TOOL
3

⁄ 16" (4.7mm)

11

⁄ 16"

(17.4mm)

17⁄ 32"
(30.9mm)

Punches holes for oil-tight electrical switches.
Keyway tool (Part # KKT316) forms 3⁄ 16" notch
in punched hole to prevent rotary movement
of switch.

101

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

35-Ton Hydraulic Punch
Punches clean, burr-free bolt and small conduit holes
in mild steel plates, beams, railings, bus bars or angle
iron up to 1⁄ 2" thick.
• Portable or fixed applications. Lift and position with
easy-carry handle or mount for production setups.
Height 133⁄ 4", weight 35 lbs.
• Four punch and die sets included for round holes
7
⁄ 16" - 13⁄ 16" diameter (gives clearance for 3⁄ 8", 1⁄ 2", 5⁄ 8"
or 3⁄ 4" bolts or conduit) plus die changeover tool set.
Throat depth 3".
• Holding plates grip work while punching to prevent binding
and clamp punch in place to free operator’s hands.
Part #

Description

Weight

SP3500

35-ton Steel Punch Set

40 lbs

tip:

Set Includes:

Hydraulic Pumps
and Hoses
recommended for use
with SP-3500 Punch:

Part #

Description

Weight

SPD-438

3⁄ 8"

Punch & Die Set

1 lb

SPD-563

1⁄ 2"

Punch & Die Set

1 lb

SPD-688

5

⁄ 8" Punch & Die Set

1 lb

• PH39 Manual Pump

SPD-813

3

1 lb

• HC927 10' Hose

SPK10

Installation Kit

5 lbs

• PH80 Manual Pump

SEE PG

47

⁄ 4" Punch & Die Set

FOR MORE INFO ON

Electric Pumps

SEE PG

• PE20D Electric Pump
• HC913 6' Hose

FOR MORE INFO ON

49

Manual Pumps

Notching Pliers
Creates clean notches for making keyways for push
button switches.

NP-1

• Ergonomically paddled handles for easy use.
• Accommodates up to 10-gauge mild steel.
Part #

Description

Weight

NP-1

Notching Pliers

3.3 lbs

NPR-1

Replacement Head for NP-1

1.2 lbs

tip:

To make easy
keyway holes, use
Gardner Bender's Keyway
Tool Part # KKT316.

NPR-1

3/16 (4.8 mm)

SEE PG

FOR MORE INFO ON

101

Keyway Tool

1/8 (3.2mm)

102

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Hydraulic Super Stainless Steel Slug-Out™ Set
1

⁄ 2" - 2" conduit size.

• Punches stainless steel up to 10-gauge (3.5 mm).
• Exclusive three-knife design splits slug into three pieces.
16

• Easy-to-use portable pump.

13

• Includes durable steel case.
17
14
Part #

Description

Weight

KSS520A

Hydraulic Super Slug-Out™ Set

35 lbs

15

7&8

11&12
9&10

Set Includes:

3&4

5&6

1&2

Part #

Description

Hole

Weight I.D. # Part #

Hole

Weight I.D. #

KPS500

1

7

.4 lb

1

KDS1500 11⁄ 2" Die

115⁄ 16"

2.5 lbs

10

KDS500

1

7

1 lb

2

KPS2000 2" Punch

23⁄ 8"

5 lbs

11

KPS750

3

13⁄ 32"

.4 lb

3

KDS2000 2" Die

23⁄ 8"

4.5 lbs

12

KDS750

3

1 ⁄ 32"

1 lb

4

PH20

–

5 lbs

13

KPS1000 1" Punch

111⁄ 32"

1 lb

5

KPR7540 Drawstud for 3⁄ 4" - 2"

–

2.5 lbs

14

KDS1000 1" Die

111⁄ 32"

1 lb

6

KPS50

Drawstud for 1⁄ 2"

–

.2 lb

15

KPS1250 11⁄ 4" Punch

111⁄ 16"

2 lbs

7

CH1211

12 ton Hydraulic Cylinder

–

6 lbs

16

KDS1250 11⁄ 4" Die

111⁄ 16"

2 lbs

8

H864

6' Rubber Hose Coupler

–

2 lbs

17

KPS1500 11⁄ 2" Punch

115⁄ 16"

3 lbs

9

⁄ 2" Punch
⁄ 2" Die

⁄ 8"
⁄ 8"

⁄ 4" Punch
⁄ 4" Die

3

Description

Hand Pump

Super Stainless Steel Slug-Out™ Set
1

⁄ 2" - 2" conduit size.

16

• Punches stainless steel up to 10-gauge (3.5 mm).
13

• Exclusive three-knife design splits slug into three pieces.

14

• Rugged storage case.

15

• Extended punch life.

Part #

Description

Weight

KSS520

1⁄ 2"

4 lbs

- 2" Super Stainless Steel Knockout Set

11&12

9&10

7&8

5&6

3&4 1&2

Hole

Weight I.D. #

Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

KPS500

1

7

⁄ 8"

.4 lb

1

KPS1500 11⁄ 2" Punch

115⁄ 16" 3.5 lbs

9

KDS500

1⁄ 2"

7⁄ 8"

1 lb

2

KDS1500 11⁄ 2" Die

115⁄ 16" 2.5 lbs

10

KPS750

3

13⁄ 32" .4 lb

3

KPS2000 2" Punch

23⁄ 8"

5 lbs

11

KDS750

3

1 ⁄ 32" 1 lb

4

KDS2000 2" Die

23⁄ 8"

4.5 lbs

12

KPS1000 1" Punch

111⁄ 32" 1 lb

5

KPR7520 3⁄4" - 2" Drawstud for Hydraulic Driver –

1 lb

13

KDS1000 1" Die

111⁄ 32" 1 lb

6

KSA50

1

–

.3 lb

14

KPS1250 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KPS50

1⁄ 2"

–

.2 lb

15

KDS1250 11⁄ 4" Die

111⁄ 16" 2 lbs

8

K88020

Metal Case

–

4 lbs

16

tip:

⁄ 2" Punch
Die

⁄ 4" Punch
⁄ 4" Die

Use this set to expand your
KOS5290 or KOS520.

3

SEE PG

98

Description

⁄ 2" Adapter
Drawstud

FOR MORE INFO ON

Hydraulic Drivers

103

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Drawstuds

KPS50 21⁄ 2" x 3⁄ 8"

KSA50 13⁄ 8" x 3⁄ 4"

KOR75125 33⁄ 16" x 3⁄ 4"

KOR152 43⁄ 4" x 3⁄ 4"

KPR7520 413⁄ 16" x 3⁄ 4"

KC3540 23⁄ 8" x 11⁄ 8"

104

K0R50 3" x 3⁄ 8"

KPR7540 105⁄ 16" x 3⁄ 4"

Shown Actual Size

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Drawstuds
Shown Actual Size

KSN3540 Hex Drive Nut 21⁄ 2" x 13⁄ 8"

KSN2530 Stud 6" x 3⁄ 4"
KSB50B Drawstud &
Bearing 23⁄ 4" x 3⁄ 8"

KSN3540 Stud 75⁄ 8" x 11⁄ 8"

KS752B Drawstud &
Bearing 41⁄ 4" x 3⁄ 4"

KSN2530 Hex Drive Nut 11⁄ 2" x 1"

105

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Mechanical Super Stainless Steel Slug-Out™ Set

11

1

⁄ 2" - 11⁄ 4" conduit size.

• Punches stainless steel up to 10-gauge (3.5 mm).
• Exclusive three-knife design splits slug into three pieces.
• Constructed of high-alloy tool steel.
5&6

• Rugged storage case.

7&8
9

Part #

Description

Weight

KSS50125

1

4 lbs

⁄ 2" - 11⁄ 4" Super Slug-Out™ for Stainless Steel

10
3&4

1&2

Set Includes:
Part #

Description

Hole

Weight I.D. # Part #

KPS500

1

7

.4 lb

1

KPS1250 11⁄ 4" Punch

111⁄ 16" 2 lbs

7

KDS500

1

7

1 lb

2

KDS1250 11⁄ 4" Die

111⁄ 16" 2 lbs

8

KPS750

3

13⁄ 32" .4 lb

3

KSB50B

Bearing and Drawstud for 1⁄ 2"

–

.5 lb

9

KDS750

3

13⁄ 32" 1 lb

4

KS752B

Bearing and Drawstud for 3⁄ 4" - 2"

–

1 lb

10

KPS1000 1" Punch

111⁄ 32" 1 lb

5

K88007

Storage case

–

1.5 lbs

11

KDS1000 1" Die

111⁄ 32" 1 lb

6

⁄ 2" Punch

⁄ 8"

⁄ 2" Die

⁄ 8"

⁄ 4" Punch
⁄ 4" Die

Description

Hole

Stud Punch
Punches 111⁄ 32" holes for 1⁄ 2" to 1" conduit or pipe.
• Features a spring loaded sleeve that increases the life and
accuracy of the punch while providing a smoother
cutting action.
• Easily punches “H” studs without damaging flanges.
• Automatic stripper.
• High-leverage design permits punching holes in aluminum
studs and mild steel (up to 20-gauge) with minimum effort.
• From the center of the punch to the back of the housing
measures 2".

106

Part #

Description

Weight

Punch #

Weight

Die #

Weight

SP-7

Stud Punch

6 lbs

43-52

1 lb

43-95

1 lb

SEE PG

FOR MORE INFO ON

159

Stud Insulators

Weight I.D. #

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Step Bits
Drills large holes in confined spaces.
• Self-starting, self-centering drill tip. No pilot hole required.
• For accurate step-by-step drilling in sheet metals. Drills
through 10-gauge mild steel or stainless steel.
• Double flute cutting action drills clean, round holes
quickly and safely with minimum effort.
• Exclusive three-lobed shank for positive, non-slip grip in
drill chucks.

SB-207

SB-210

• Made of high-speed steel for faster drilling and longer life.
• Applications include junction boxes, switch boxes, metal studs,
electrical appliances, lighting fixtures and many other uses.

Part #

Sizes

No. of Shank Step
Increments Sizes Size Thickness Weight
1⁄ 16"

SB-205

1⁄ 4"

SB-207

3

SB-209

7

SB-210

7

- 3⁄ 4"

⁄ 16" - 7⁄ 8"

1

⁄ 16"

⁄ 8" - 11⁄ 8" –
⁄ 8" - 13⁄ 8"

1

⁄ 16"

3⁄ 8"

1⁄ 8"

1 lb

12

3

1

1.3 lbs

2

1

1

1.5 lbs

11

3

1

1.8 lbs

9

⁄ 8"
⁄ 2"

⁄ 8"

⁄ 8"
⁄ 8"
⁄ 8"

SB-209

SB-205

107

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

NOTES

108

HAND TOOLS

112

117

119

With exclusive features for safety and

121

durability, Gardner Bender hand tools
offer superior performance on the job.

123

109

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Circuit Alert™ . . . . . . . . . . . . . . . . . . .111-113
Circuit Alert™ Tester . . . . . . . . . . . . . . . 111
Circuit Alert™ Knife . . . . . . . . . . . . . . . . .111
Circuit Alert™ Wire Strippers . . . . . . . . .112
Circuit Alert™ Work Lights . . . . . . . . . . .112
Circuit Alert™ Pliers . . . . . . . . . . . . . . . .113
Circuit Alert™ Screwdrivers . . . . . . . . . .113
Cutters . . . . . . . . . . . . . . . . . . . . . . . .122-123
BX cutter . . . . . . . . . . . . . . . . . . . . . . . . .122
Ratcheting . . . . . . . . . . . . . . . . . . . . . . . .123
PVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Datacom/ VDV . . . . . . . . . . . . . . . . . .118-119
Cable strippers . . . . . . . . . . . . . . . . . . . .118
Punch-down . . . . . . . . . . . . . . . . . . . . . .119
Crimpers . . . . . . . . . . . . . . . . . . . . . . . . .119
Fuse Puller . . . . . . . . . . . . . . . . . . . . . . . . .124
Knives . . . . . . . . . . . . . . . . . . . . . . . .111, 124
Pliers . . . . . . . . . . . . . . . . . . . . . . . . .120 -121
Long Nose . . . . . . . . . . . . . . . . . . . . . . .120
Linemen’s . . . . . . . . . . . . . . . . . . . . . . . .121
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . .123
Wire Strippers . . . . . . . . . . . . . . . . . .114-117
Multi-tool . . . . . . . . . . . . . . . . . . . . . . . .116
Cable Rippers . . . . . . . . . . . . . . . . . . . . .117

110

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Wire
Strippers

Safe & Convenient

Ne

NEW line of tools with Snap-in sensor detects
AC voltage without contacting live wires

w

p-In Sensor
a
n
S

Work Lights

Screwdrivers

Audible
Visual

Pliers

Electrician’s
Knives

Circuit Alert™
Voltage Sensing Module

www.circuitalert.com

The Circuit Alert™ voltage sensing module
fits in a whole variety of Circuit Alert™ tools.
• Non-contact AC voltage detection.
• Audio and visual alerts.
• Pocket clip.
• Tri-directional momentary on/off switch.
®

Part #

Description

CAM-10

Voltage-sensing module

CAM-10 Pocket Clip

Circuit Alert™
Voltage Sensing Electrician’s Knife
Rip, strip and cut with one tool.
• Durable, heavy-duty casing.
• Designed specifically for electricians.

SEE PG

124

FOR MORE INFO ON

RK-6 Electrician’s

Knife

• Blade type: industry standard.
Part #

Description

RKT-21

Circuit Alert™ Electrician’s Knife with stripper & NM cable ripper

For more information, go to www.circuitalert.com

111

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Circuit Alert™
Voltage Sensing Wire Strippers

www.circuitalert.com

• Audible and visual alerts indicate the presence
of voltage.

GST-55M

• Cuts and strips solid and stranded wire.
• Stainless steel body for maximum corrosion resistance.
• Ergonomic, cushioned handles for ultimate comfort
and control.
• Double bevel cutting blades for superior nick resistance.

GST-70M

• Dual gripping positions for traditional or forward
hand positions.
• Easy-to-read stamped markings.
• Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32.
• Wire looping holes form wire to fit on screw terminals.
• Plier nose for gripping and pulling.
GST-224M

• cULus listed tester.
• Durable, drop resistant construction.

Part #

Description

Wire Gauge

Length

GST-55M

Circuit Alert™ Voltage Sensing Wire Stripper

#10 - #18 AWG

7"

GST-70M

Circuit Alert™ Voltage Sensing Crimper/Stripper

#8 - #20 AWG & Multi Crimping Stations

7"

GST-224M Circuit Alert™ Voltage Sensing NM Cable Stripper 12/2 & 14/2 NM Cable

Wire Stripping

Volt Sensing (50-600 VAC)

Patents Pending

71⁄2"

Bolt Cutting and Rethreading

Circuit Alert™ Work Lights
Designed for electricians for maximum versatility and
hands-free operation in one durable tool.

FLT-10

www.circuitalert.com

• Multi-adjustable.
• Rugged design and construction.
• Batteries included.

112

Part #

Description

FLT-10

Circuit Alert™ Voltage Sensing Work Light

FLT-20

Circuit Alert™ Voltage Sensing Work Light

90° Swivel Head

Rotating Hang Hook

For more information, go to www.circuitalert.com

FLT-20

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Circuit Alert™ Pliers
GPT-70

Circuit Alert™ pliers combine common electrician’s
www.circuitalert.com
needs with Gardner Bender’s over-molded, comfort grip.
• Crimp terminals.
• Cut wire and cable.
• Strip wire.

GPT-80

• Hammer head.
• Forged steel construction for long life.
• Precision hardened cutting blades
Part #

Description

Size

GPT-70

Circuit Alert™ Voltage Sensing Side Cutters

7"

GPT-80

Circuit Alert™ Voltage Sensing Long Nose Pliers 8"

GPT-90

Circuit Alert™ Voltage Sensing Linesmens

Testing

GPT-90

8"

GPT-90 – Hammer Head

GPT-80 – Wire Stripping

Circuit Alert™ Screwdrivers
The Circuit Alert™ screwdrivers deliver up to
10-in-1 bits and insulated comfort grip handles.

www.circuitalert.com

• Use with Hex-Lok® connectors.

FOR MORE INFO ON

SEE PG

Hex-Lok®
Wire Connector

9
Part #

Description

Bits

SDT-3

Circuit Alert™ Voltage Sensing Screwdriver 3-in-1

See diagram

SDT-6

Circuit Alert™ Voltage Sensing Screwdriver 6-in-1 See diagram

SDT-10

Circuit Alert™ Voltage Sensing Screwdriver 10-in-1 See diagram

#1

3/16"

#2

R2

5/16"

SDT-6

6-in-1

For more information, go to www.circuitalert.com

SDT-3

5/16"
3-in-1

#1

3/16" R1

R2

#2

1/4"

#15

#10

SDT-10

5/16"

1/4"

1/4"

#2

1/4"
10-in-1

113

Feature

G
S35
5
G
S36
0
G
S36
1
G
ES
-5
5
G
ES
P55
G
ES
-2
24
G
ES
P22
4
G
ST
-7
0M

Comparison Chart

G
S40

Wire Strippers
Voltage Sensing
Spring Action Return



Pliers Nose



Loop Hole









Deluxe Cushion Grip
Locking Handle
































G
ST
-5
5M
G
ST
-2
24
M

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

















Wire Stripping Range
Solid

#10 #24

#10 #20

#10 #20

#16 #30

#10 #18

#10 #18

#12 &
#14

#12 &
#14

#8 #20

#10 #18

#12 &
#14

Stranded

#10 #24

#10 #20

#10 #20

#16 #30

#12 #20

#12 #20

—

—

#10 #22

#12 #20

—

NM Cable

—

—

—

—

—

—

—

—

14/2 &
12/2

14/2 & 14/2 &
12/2
12/2

GES-55

ArmorEDGE™ Wire Stripper
Strips and cuts solid and stranded wire.
• Stainless steel body for maximum corrosion resistance.
• Ergonomic, cushioned handles for ultimate comfort
and control.
• Double bevel cutting blades for superior nick resistance.
• Dual gripping positions for traditional or forward hand positions.

GESP-55

• Easy-to-read laser-etched markings.
• Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32.
• Wire looping holes form wire to fit on screw terminals.
• Plier nose for gripping and pulling.
• Patents pending.
• Limited Lifetime Warranty.
• GESP-70 crimps insulated and non-insulated terminals,
crimps coaxial “F” connectors, cuts bolt sizes 4-40, 5-40,
6-32, 8-32, 10-24 and 10-32.

GESP-70

Part #

Description

Handle

Wire Gauge

GES-55

ArmorEDGE™ Wire Stripper

Curved

#10 - #18 AWG

61⁄2"

GESP-55

ArmorEDGE™ Wire Stripper

Symmetric

#10 - #18 AWG

63⁄4"

GESP-70

ArmorEDGE™ Multi-Tool Stripper/Crimper Symmetric

#10 - #22 AWG

81⁄4"

GES-224

ArmorEDGE™ NM Cable Stripper

Curved

12/2 & 14/2 NM Cable

7"

Symmetric

12/2 & 14/2 NM Cable

71⁄4"

GESP-224 ArmorEDGE™ NM Cable Stripper

Length

GES-224

GESP-224

114

12/2 and 14/2 NM
Cable Stripper

10-18 AWG Wire Stripper

GESP-224

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Milwaukee Clipper™ Strippers
Strips solid or stranded wire.
• Compact tool adjusts quickly to any of eight wire sizes.
• Hardened spring steel provides strength and durability.
• Looping hole bends and loops wire for termination on screws.
• Vinyl grips for added comfort.
• GS-40 includes spring return for easy handling.
Part #

Description

Wire Gauge

GS-40

Milwaukee Clipper™ Stripper w/spring

#10 - #24 AWG

Length
5"

GS-355

Wire Strippers
Strips solid or stranded wire.
• Precision stripping stations.
• Laser-etched markings.
• Pliers nose and curved cutting blade aid in pulling and cutting wire.
• Power spring return reduces hand fatigue.

GS-360

• Curved handles for added comfort.
• Looping hole forms wire to fit on screw terminal.
• Comfortable high-leverage handles.
Part #

Description

Wire Gauge

GS-355

Stripper

#10 - #20 AWG

Length

GS-360

Stripper with lock

#10 - #20 AWG

6"

GS-361

Small Gauge Stripper

#16 - #30 AWG

61⁄ 4"

61⁄ 4"
GS-361

Strip-Easy™ Stripper
Strips solid or stranded wire.
• Strips wires clean with one easy squeeze, up to a full 7⁄ 8".
• Blades cut insulation without nicking conductor.
Jaws open automatically to remove wire without
crushing ends.
• AWG size clearly marked at each cutting hole.
• Comfortable no-slip handles.
Part #

Description

Wire Gauge

SE-92

Automatic Wire Stripper

#8 - #22 AWG

Length
8"

115

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Automatic Stripper & Crimper
Strips solid or stranded wire.
• Automatic jaw-loaded wire stripper self-adjusts.
• Crimps insulated, and non-insulated terminals.
• Comfort high-leverage handles.
Part #

Description

Wire Gauge

GS-394

Automatic Wire Stripper

#10 - #26 AWG

Length
8"

Multi-Tools
Comparison Chart
Feature

GS-365

Spring Action Return
Pliers Nose
Conduit Reamer Nose
Loop Hole
Deluxe Cushion Grip
Locking Handle
Cutter Blade
Cuts & Rethreads Bolts
Crimps Insulated Terminals
Crimps Non-insulated Terminals
Copper & Steel Crimp Sleeves
Coaxial Connectors
Wire Stripping Range

GS-370

GESP-70

























#10 - #22

#10 - #22













#6 - #16

SEE PG

114

Multi-Tool Stripper, Cutter & Crimper
Strips and cuts wire.
• Strips copper and aluminum wire, solid or stranded.
• Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32.
• Pliers nose for pulling and looping wire.
• Crimps insulated & non-insulated terminals.
• Crimps coaxial “F” connectors.
• Curved cutting blade.
• Comfort high-leverage handles.
• Precision ground-stripping stations prevent nicking conductor while stripping.
Part #

Description

Wire Gauge

GS-370

Multi-Tool

#10 - #22 AWG

Length
81⁄ 2"

Multi-Tool Stripper, Cutter & Crimper
Strips #6 - #16 AWG solid, #8 - #18 AWG stranded.
• Strips copper and aluminum wire, solid or stranded.
• Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32.
• Crimps #310, 311, 410 and 411 crimp sleeves,
solderless terminals and coaxial connectors.
• Pliers nose for pulling and looping wire.
• Snub nose for reaming 1⁄ 2" and 1" conduit.
• Precision ground-stripping stations prevent nicking conductor while stripping.
• Lock for compact storage.

116

Part #

Description

Wire Gauge

GS-365

Multi-Tool Stripper and Cutter

#6 - #16 AWG, Solid
#8 - #18 AWG, Stranded

Length
81⁄ 2"

FOR MORE INFO ON

Additional
Multi-Tools

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Multi-Tool Cable Strippers
Strips, crimps and cuts bolts.
• Crimps terminals.
• Strips 10-22 AWG wire.

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
| fax 905.564.0305Length
| www.gardnerbender.com

Part #

905.564.5749
Description CANADA
Wire
Gauge

GS-366

Multi-tool crimper & stripper

91⁄ 4"

#10 - #22 AWG

Romex® Strippers
Comparison Chart
Feature

CR-100

CRC-100

CR-1000

GRX-3224











Spring-Action Return
Pliers Nose
Loop Hole
Wire Stripper
Locking Handle



Cutter Blade
Cuts & Rethreads Bolts
Cable Ripping Range

12/2 & 14/2
NM cable

12/2 & 14/2
NM cable

10/2 & 14/2
NM Cable

SEE PG

112

FOR MORE INFO ON

Additional
Romex Strippers

12/2 & 14/2
NM cable

* See ArmorEDGE and Circuit Alert sections for additional Romex / NM cable strippers.

Dual Romex® Stripper
Strips outer sheath of #12/2 or #14/2 cable in one tool.
• Strips single conductor #12 or #14 AWG.
• Power spring return reduces hand fatigue.
• Curved cutting blade.
• Pliers nose.
• Wire looping hole.
• Cuts and rethreads bolt sizes 6-32 and 8-32.
• Locking handle for compact storage.
Part #

Description

Wire Gauge

GRX-3224

NM Cable Stripper

12/2 & 14/2 NM Cable and #12 AWG

Length
75⁄ 8"

and #14 AWG single conductor

Cable Ripper
Slits outer covering of Romex® (all sizes, both old and new) and
other non-metallic (type NM) sheathed cable.

CR-100

• Wire gauge on handle checks and strips #6 to #14 AWG.
• Nickel-plated finish resists corrosion.
Part #

Description

Wire Gauge

CR-100

Cable Ripper

12/2 & 14/2 NM Cable

Length

CRC-100

Curved Cable Ripper

12/2 & 14/2 NM Cable

4"

CR-1000

Premium Cable Ripper

12/2 & 14/2 NM Cable

4"

4"

CRC-100

1. Rip open cable jacket 2. Cut off cable jacket

3. Strip wire ends

Romex® is a registered trademark of Southwire Company, Carrollton, GA

CR-1000

117

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Datacom Strippers
Comparison Chart
Feature

GTPS-100

GS-359

SE-98









Strips RG-58
Strips RG-59
Strips RG-6
Strips CAT 3 Cable
Strips CAT 5 Cable




GTPS-200






Strips Flat Telephone Wire



Cutter Blade to Cut Cable

UTP/STP Cable Stripper
Strips UTP and STP cable up to .24" (6.2mm) diameter.
• Tension release lever for easy positioning and release of cable.

data
com

GTPS-100

• Compact design for easy handling.
• For use on CAT 3 and CAT 5 cable.

Part #

Description

Wire Gauge

Length
31⁄ 4"

GTPS-100 UTP/STP Round Cable Stripper UTP/STP
GTPS-200 Premium Cable Stripper

41⁄ 2"
UTP, STP, flat, round from 1⁄ 8" to 3⁄ 8" in
diameter and silver satin and other flat cables

GB EXCLUSIVE! Coaxial Stripper
Cuts and strips RG-59 and RG-6 coaxial cable.
• Can be used with both standard and quad shield cable.
• Multiple size stripping stations strip both the outer
jacket and inner conductor.
• Exclusive hex-shaped slot helps push “F”
connectors onto cable.
• Curved cutting blade.
• Patented.

Part #

Description

Wire Gauge

GS-359

Coaxial Stripper

RG-59 & RG-6

Length

data
com

61⁄ 4"

Coaxial Cutter & Stripper
Cuts and strips coaxial cable (RG-58, RG-59 and RG-6).
• Easily adjusts to various cable thickness.
• One-squeeze cutting action.
• Includes replacement blade model #SERB-25.

118

Part #

Description

Wire Gauge

SE-98

Coaxial Cable Cutter & Stripper

RG-58, RG-59 & RG-6

Romex® is a registered trademark of Southwire Company, Carrollton, GA

Length
43⁄ 4"

data
com

data
com

GTPS-200

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Punch-Down Tools
High-impact design assures good quality terminations.
• Inserts and cuts cable in termination blocks.
• Constructed of durable ABS resin.
• Impact adjustment with high/low setting
accommodates multiple applications.

PDT-110

data
com

• Extra blade can be stored in handle.
• Spring-loaded design quickly and easily inserts and
trims terminations.
• 110-style blade used in CAT 3 and CAT 5 terminations.
• 66-style blade used to terminate phone wiring.

PDT-110LC

data
com

Part #

Description

Network

PDT-110

Type-110 Terminal Punch-Down Tool with Blade

Data

71⁄ 2"

Data

53⁄ 4"

PDT-110LC Non-Impact Punch-Down Tool

Length

data
com

Replacement Blades:
Part #

Description

PDB-66

Type-66 Replacement Blade

PDB-110

Type-110 Replacement Blade
PDB-66

PDB-110

Wire Stripper & Punchdown Tool
Cuts, strips & terminates.
• Strips: RG6, CAT3, CAT5, UTP, STP flat and
round, speaker wire, flat telephone wire.
• Type 110/66 terminal punchdown.

Part #

Description

Network

SPD-10L

Ergo datacom combination tool

Data

Length
7"

RJ45 / RJ11 Modular Plug Crimp Tool

GMC-1145

Used to produce patch cable and handset cables,
cut, strip and crimp.
• Heat-treated steel frame provides
strength and durability.
• Replacement cutting blade extends
the life of the tool.
• Slip-resistant handles.

data
com
Part #

Description

GMC-1145

Telephone Crimp Tool, RJ-11/12 and RJ-45 RJ-11, RJ-12

GMC-2000L1 Module Crimp Tool Kit

Plugs

Pins
2, 4, 6

RJ-45

8

RJ-11, RJ-45

2, 4, 8

data
com

GMC-2000

119

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Long Nose Pliers
Long Nose Pliers
Multi-function pliers – cuts, strips and crimps.
• Use needle nose to form wire or grip small parts.
• Strips #14 - #16 AWG solid or stranded wire.
• Crimps insulated terminals up to #10 AWG.
• Cutting blade cuts solid or stranded wire.
Part #

Description

GS-385

Long Nose w/ Cutter and Crimper

Length
61⁄2"

Long Nose Pliers with Side Cutter
Long nose design for forming and looping wire
and handling small parts.
• Forged from high-carbon steel for durability and strength.
• Knurling on jaws grips work tightly.
• Cutting edges are heat treated to hold their edge.
• Comfort-grip handles.
Part #

Description

GPS-3238

Long Nose Pliers

Length
81⁄ 2"

Cutting Pliers
Cutting Pliers, Box Joint
Tapered nose allows cutting in tight locations.
• Dual cutting edge and high-leverage handle design
for optimal gripping and cutting performance.

GPS-3220

• Precision-machined and induction-hardened
knives strengthen cutters and provide consistent
performance when cutting aluminum, copper and
medium-hard steel wire.
• Comfort-grip handles.
GS-386
Part #

Description

Length

GPS-3220

Cutting Pliers, Box Joint

8"

GS-386

Diagonal Cutting Pliers

6 3⁄8"

Cutting Pliers, Curved Diagonal
Angled head allows cutting in tight locations.
• Dual cutting edges and high-leverage handle design
for optimal gripping and cutting performance.
• Precision-machined and induction-hardened
knives strengthen cutters and provide consistent
performance when cutting aluminum, copper and
medium-hard steel wire.
• Flared handles for added comfort.

120

Part #

Description

GPS-3228

Cutting Pliers, Curved Diagonal

Length
8"

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Linemen’s Pliers
Linemen's Pliers
Medium-duty side-cutting pliers.
• Cuts copper or aluminum wire.
• Serrated, square tip jaw for extra grip on bolts.
• Hardened-steel construction for long life.
• Comfort-grip handles.
Part #

Description

GS-387

Linemen's Pliers

Length
71⁄2"

Linemen's Pliers with Fish Tape Puller
Built-in groove designed for gripping and pulling flat fish tape.
• Forged from high-carbon steel for durability
and strength.
• Precision-machined and induction-hardened
knives strengthen cutters and provide
consistent performance when cutting aluminum,
copper and medium-hard steel wire.
• Comfort-grip handles.
Part #

Description

GPS-3214

Linemen's Pliers w/ Fish Tape Puller

SEE PG

FOR MORE INFO ON

74

Length
91⁄ 2"

Fish Tapes
Built-in groove designed for gripping
and pulling flat fish tape

Linemen's Pliers, Round Nose
Standard pliers cut aluminum, copper and
medium-hard steel wire.
• Forged from high-carbon steel for durability
and strength.
• Dual cutting edges and high-leverage handle
design for optimal gripping and cutting performance.
• Precision-machined and induction-hardened knives strengthen
cutters and provide consistent performance.
• Comfort-grip handles.
Part #

Description

GPS-3219

Linemen's Pliers, Round Nose

Length
91⁄ 4"

Linemen's Pliers with Cutter & Crimper
High-leverage tool with crimping die and side cutters.
• Comfort-grip handles.

Part #

Description

GCP-3400

Linemen's Pliers and Crimping Tool

Length
91⁄ 2"

121

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Crimping Pliers
8" Crimping Pliers
Crimp insulated or non-insulated terminals.
• Cuts copper and aluminum wire.
• Tapered nose for cutting in tight locations.
Part #

Description

GS-388

Crimping Pliers

Length
8"

BX & Flexible Cable Cutter
Cuts BX, MC, AC, and liquid tight 3⁄ 8".
• High durability blade provides 2X normal wear characteristics.
• Includes storage space for replacement blades.
• Pivot shaft is reinforced with high strength steel sleeve.
• 25 foot drop test.
• Thumbwheel for easy blade change, no
tooling required.
• Patented quick-clamp feature automatically adjusts
to cable size and secures it for splitting.
• Automatic release ejects cable.
• Cutting depth adjustment ensures clean cuts without
nicking cable.
Part #

Description

GBX-300

BX Armor Cutter

Length

Extra blade storage

71⁄4"

Replacement Parts:
Part #
Description

Pk

GBRX-301

3pk

Replacement Blade

Cable Cutter
Cable-cutting tool designed to cut cleanly with high-leverage
one-hand operation.
• Cuts soft copper & aluminum cable.
Part #

Description

Cut Size

GC-375

Cable Cutter

2/0

Length
8"

High-Leverage Cutters
Cuts soft copper and aluminum cable up to 1000 MCM.
• Heat-treated alloy steel jaws make fast, sharp cuts.

GC-1000

• Lightweight fiberglass handles on GC-500 and
GC-1000 feature comfortable rubber grips.

122

Part #

Description Cut Size

GC-500

Cable Cutter 500 MCM max

GC-1000 Cable Cutter 1000 MCM max

Length
24"
33"

GC-500

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Ratcheting Cable Cutter
Cut copper and aluminum cable up to 750 MCM.
• Ratcheting mechanism for increased leverage.
• Variable-force cutting action permits choice between
high force and speed.
• Dual-action handles cut from either direction;
easy to use in tight spots.
• Hardened alloy-steel blades are easily sharpened without
removing them from tool.
• Rubber hand grips permit firm grip control.
Part #

Description

GRC-750

Ratcheting Cable Cutter 19⁄ 16"

Jaw Opening Length
153⁄ 4"

GPC-200

Cut-A-Way™ PVC Conduit Cutter
Cuts flexible, watertight flexible and schedule 40 PVC
conduit 1⁄ 2" to 2".
• Patented design makes fast, clean cuts.
• Tough, lightweight nylon handles.
• Compact 8" tool fits neatly and safely into pocket or
tool pouch.
Part #

Description

GPC-200

Cut-A-Way™ PVC Cutter (2")

17"

GKC-100A Cut-A-Way™ PVC Cutter (1")

8"

GKC-100A

Length

Insulated Screwdriver Set
Part #

Description

SCE-3262 Insulated Screwdriver
Set, 2 pc.

Set Contains:
Length Qty Description
8"

1

No. 2 Phillips® tip

1

3

⁄ 16" Slotted tip

Reversible Insulated Screwdriver
Reversible tip combines two tools into one.
• Molded shaft insulation tested to 1000 V provides
secondary protection against accidental electrical shock.
• Ergonomic grip is engineered for maximum torque with
minimum effort.
Part #

Description

Reverse from

Reverses to

SCE-3260

Insulated Screwdriver, Reversible tip

No. 2 Phillips®

3

⁄ 16" Slotted

Triple Tap
Three-in-one tapping tool designed for electrical work.
• Cleans and rethreads holes.
• Made of top-grade steel.

Part #

Description

TT-10B

3 Size Tapping Tool

6-32

Tap Sizes
8-32 10-24

Length
67⁄8"

123

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Fuse Pullers
Part #

Description

Fuse Size

Length

FPE-20

Fuse Puller

0-200A/250V and 0-100A/600V

8"

Electrician’s Knife
Rip, strip, and cut with one tool.
• Reversible blade for longer life.
• Quick blade change.
• Wire stripper.
• NM cable ripper.
• Storage area in handle for spare blades.
• Includes three replacement blades.
Part #

Description

RK-6

Electrician’s Knife, 6"
Cable Ripper

Electrician's Knife
Two-in-one tool has sharpened blade for skinning wire and
screwdriver tip for screws.
• Tempered carbon-steel blades sharpen easily and hold their edge.
• Compact 33⁄ 4" size.

124

Part #

Description

KF-200

Two-in-one Electrician's Knife

Wire Stripper

TESTERS

130

129

131

Gardner Bender is pleased to offer this

134

innovative, full featured line designed to
make electrical work faster and safer.

135

125

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Battery Tester (Analog) . . . . . . . . . . . . . . .136

Heavy-Duty 3-way . . . . . . . . . . . . . . . . .128

Continuity Tester

Low Voltage Twin Probe . . . . . . . . . . . . .127

Heavy-Duty . . . . . . . . . . . . . . . . . . . . . . .129
Multimeters - Analog . . . . . . . . . . . . . . . . .133

Continuity Tester . . . . . . . . . . . . . . . . .128

Analog Multimeters Comparison Chart . .133

Solenoid . . . . . . . . . . . . . . . . . . . . . . . . .129

Five Function, 12-Range . . . . . . . . . . . .133

Tester Leads . . . . . . . . . . . . . . . . . . . . . . . .136

Six Function, 14-Range . . . . . . . . . . . . .133

Tester Replacement Parts

Seven Function, 19-Range . . . . . . . . . . .133
Multimeters - Clamp-On . . . . . . . . . . . . . . .135
Clamp-On Comparison Chart . . . . . . . . .135
AC Clamp Meter with Lockjaw . . . . . . . .135
Auto-Ranging Digital . . . . . . . . . . . . . . . .135
Multimeters - Digital . . . . . . . . . . . . . . . . .134
Digital Multimeters Comparison Chart . .134
Three Function, 13-Range . . . . . . . . . . .134
Four Function, 14-Range . . . . . . . . . . . .134
Seven Function, 7-Range Auto-Ranging . .134
Non-Contact Voltage Testers . . . . . . . . . . .130
Non-Contact Voltage Testers
Comparison Chart . . . . . . . . . . . . . . . .130
Circuit Alert™ . . . . . . . . . . . . . . . . . . . . .130
Live-Wire™ . . . . . . . . . . . . . . . . . . . . . . .130
Receptacle Testers/Analyzers
Receptacle Testers/Analyzers
Comparison Chart . . . . . . . . . . . . . . . .131
Lan Tracker™ . . . . . . . . . . . . . . . . . . . . .132
Receptacle Tester & Circuit Analyzer . . .131
GFCI & Circuit Analyzer . . . . . . . . . . . . .131
Voltage Testers . . . . . . . . . . . . . . . . . .127-129
Voltage Testers Comparison Chart . . . . .127
6-way Circuit . . . . . . . . . . . . . . . . . . . . . .128

126

Screwdriver, Voltage Probe &

(fuses, batteries) . . . . . . . . . . . . . . . . . . .137

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Voltage Testers
Selection Chart
Feature

GET-3202 GET-3100 GET-3213 GET-3206 GCV-3206 GVT-392

GCT-3304 GAT-3400 GVD-3504 GVD-3505

Voltage Range
AC Voltage

5-50V

80-250V

80-300V

120-300V

12-250V

120-480V

DC Voltage

5-50V

80-250V

80-300V

150-380V

12-250V

120-480V

50-600V

12-600V











6-12V

Functions
Polarity



Continuity





Tracing
Indication
Audible


















Lead Length

5.5"

2"

24"

30"

30"

26"

36"

36"

Pocket Clip











Visual
Vibration
General



Agency Approvals
Drop Rating

6'

6'

6'

6'

6'

6'

6'

6'

6'

6'

Crush Rating

150 Lb

150 Lb

150 Lb

150 Lb

150 Lb

150 Lb

150 Lb

150 Lb

150 Lb

150 Lb

CAT Rating

I 50V

II 300V

II 300V

III 600V

III 600V

Warranty

1 year

1 year

1 year

1 year

1 year

1 year

1 year

1 year

1 year

III 600V
1 year

Low Voltage Twin Probe
Circuit Tester
Tests AC/DC Voltage from 5 - 50 V AC/DC, 50-60 Hz.
• Indicator glows when voltage is present and
brightens as voltage increases.
• Insulated alligator clip test leads.

No batteries
required

• Pocket clip for added convenience.
• Dual Insulated, durable ABS housing.
TESTS
 Low volt outdoor lighting
 Low volt control panels
 Doorbells
 Alarm systems
 Automotive 12 V DC and 36 V DC

GET-3202

One Year

50V

Warranty

Twin Probe Circuit Tester
Tests AC/DC Voltage from 80-250 V AC/DC.
• Neon indicator glows when voltage is present
and brightens as voltage increases.
• Insulated housing.
• Insulated test leads.

GET-3100

No batteries
required

• Pocket clip for added convenience.
• 2" test lead.
TESTS
 DC motors
 Switches
 Outlets

One Year
Warranty

300V

127

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Heavy-Duty 3-way Voltage Tester
Tests AC/DC Voltage at 120, 240 and 277 V.
• Individual indicators for each voltage range
assures reliability.
• Functional, lightweight design features twin
flexible leads and convenient pocket clip.
• 24" test lead.

GET-3213

• Dual insulated, durable ABS housing.
• Pocket clip for added convenience.
TESTS
 Outlets
 Panels
 Light fixtures
 Switches
 Circuit Breakers

One Year
Warranty

300V

6-Way Circuit Tester
Tests AC Voltage at 120, 240, 480 V and DC
Voltage at 150, 300 and 500 V.
• 30" test lead.
• Bright neon indicators.
• Rugged twin-probe design
features heavy-duty
test lead insulators.

GET-3206

TESTS
 Outlets
 Panels
 Light Fixtures
 Switches
 Circuit Breakers
 Motors
 Appliances
 Fuses
One Year
Warranty

Combination Screwdriver, Voltage
Probe & Continuity Tester
Tests for Continuity and AC/DC Voltage.
• Tests continuity on non-energized circuits.
• Tests from 12 - 250 V AC/DC on energized circuits.
• LED indicator glows when voltage or
continuity exists.
• Batteries included.
• Convenient screwdriver tip
and pocket clip.

128

TESTS
 Outlets
 Fuses
 Switches
 Extension cords
 Light fixtures
 Low Voltage Lighting Circuits

GCV-3206

One Year
Warranty

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Solenoid Voltage Tester
Test AC/DC Voltage from 120 - 480 V and DC Polarity.
• Dual voltage indication: solenoid vibration
and neon bulb.
• Neon bulb indicates DC polarity.
• Built-in slots in probe housing hold probes
for one-hand testing and storage.

GVT-392

• 4' reach from probe to probe with
probes unlocked.
• High-impact, dual insulated, case
stands up to rugged service.
TESTS
 Outlets
 Panels
 Light fixtures
 Switches
 Circuit Breakers
 Extension Cords

Probes lock together
to enable one
handed testing of
standard outlet

One Year
Warranty

600V

Heavy-Duty Continuity Tester
Tests for continuity in non-energized circuits.
• 36" insulated test lead with alligator clip.
• Bright indicator bulb lights if
continuity exists.
• Requires (2) AAA batteries, included.
• Pocket clip for added convenience.

GCT-3304

TESTS
 Extension cords
 Fuses
 Switches
 Water heater coils
 Unenergized low voltage wiring

One Year
Warranty

Automotive Voltage Tester
Used to test DC Voltage in automotive applications.
• DC Voltage from 6-12 V.
• Durable ABS Housing w/pocket clip.
• 3' test lead with alligator clamp.
• Sharp tip for piercing wire jacket.
• Pocket clip for added convenience.
TESTS
 Fuses in junction block
 Automotive circuits for voltage
 Back probe connectors & sockets

GAT-3400

One Year
Warranty

129

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Non-Contact Voltage Testers
Comparison Chart
Feature
Detection Range

GVD-3504

GVD-3505

50-600 V AC 12-600 V AC




Visual
Audible






Adjustable Sensitivity



Pocket Clip
Agency Approvals
Warranty

1 year

1 year

Batteries

1 AAA

(2) Button
Cells

(included)

Circuit Alert™ Non-Contact
Voltage Detector
Indicates the presence of AC Voltage from 50 - 600 V.
• Visual (flashing) and audible (beeping) indicators
signal presence of voltage.
• Built-in “safe test” feature assures batteries are
operating properly.
• Compact design fits in shirt pocket.
• Operates from 1-AAA battery (included).
• Patented.

GVD-3504

TESTS
 Outlets
 Switches
 Circuit breaker panels
 Wiring
 Light fixtures

One Year
Warranty

600V

Live-Wire™
Adjustable sensitivity detects the presence of AC
Voltage from 12 - 600 V without contacting wires.
• Visual (flashing) and audible (beeping)
indicators signal presence of voltage.
• Adjustable sensing levels.
• Built-in “safe test” feature assures
batteries are operating properly.
• Operates from 2-LR44 1.5 Volt
batteries (included).
TESTS
 Doorbells
 Low voltage lighting
 Outlets
 Switches
 Electrical panels
 Light fixtures

GVD-3505

*Patent # 5877618

One Year
Warranty

130

600V

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Receptacle Testers / Analyzers
Comparison Chart
Tests for:
Open Ground
Open Neutral
Open Hot
Hot / Ground Reversed
Hot / Neutral Reversed
Correct Wiring

GRT-3500

GFI-3501
















1 year

1 year

GFCI Test Function
Agency Approvals
Warranty

Receptacle Tester & Circuit Analyzer
Tests standard receptacles to ensure proper wiring.
• Neon indicators give positive indication of circuit status.
• Compact unit simply plugs into any standard
3-wire/grounded receptacle (110 - 125 V
AC circuits).
Tests standard
outlets

• Tests for six circuit conditions: open
ground, open neutral, open hot,
hot/ground reverse, hot/neutral
reverse, and correct wiring.
• Succession of yellow and red lights
provides indication of circuit status or
specifies wiring errors.

GRT-3500

• Easy-to-read three views –
top, side and bottom.
TESTS
 Standard outlets
 Extension cords

One Year
Warranty

Ground Fault Receptacle Tester
& Circuit Analyzer
Tests ground fault receptacles by overloading
circuit and tripping GFCI.
• Easy to use. Simply plug tester into any
circuit protected by a ground fault receptacle
(110 - 125 V AC) and press black
button to overload circuit.

Tests standard
outlets

• Tests for seven conditions: ground
fault interruption, open ground,
open neutral, open hot, hot/ground
reverse, hot/neutral reverse, and
correct wiring.
• Succession of yellow and red lights
provides indication of circuit status or
specifies wiring errors.

GFI-3501

Tests outlets
protected by GFCIs

• Tester trips GFCI between 6 - 9 mA.
TESTS
 Standard outlets
 GFCI outlets
 Extension cords

One Year
Warranty

131

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Lan Tracker™
Multi-Purpose Wire Tracer
Traces any unshielded and unenergized wire or cable.

GET-4220K

• Four transmitter plug types encased inside
closeable hatch:
- RJ-11
- Alligator Clips
- Coax
- RJ-45
• Detects unshielded wires up to 12", when
using ground clip.
• Adjustable sensitivity detects wires in
close proximity.
• L.E.D. intensifies as the signal gets stronger.
• Audible feature differentiates transmitter signal
from other signals.
• Requires; (2) AA batteries for
transmitter (included)
(3) 1.5 V LR-44 batteries for
Receiver Wand (included)
• Patented.

Five Year
Warranty

132

Trace Coax Cable

Trace Data Cables

Trace Phone Lines

Compact Receiver

data
com

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Analog Multimeters
Full family of analog multimeters test AC Voltage, DC Voltage,
DC Current, Resistance, Continuity, and batteries.
• Manual range selection.
• Easy to read, color-coded analog displays.
• All testers include batteries, test leads, spare fuse, and
operating instructions.
• All are Agency approved and incorporate fuse overload
protection circuitry.
One Year
Warranty

GMT-312

GMT-318

GMT-319

Feature

GMT-312

GMT-318

GMT-319

AC Voltage

300V

500V

1000V

DC Voltage

300V

500V

1000V

250 mA

250 mA

10 A

Voltage Range

Current Range
AC Current
DC Current
Functions
Resistance
Decibels (on AC voltage ranges)

1 Meg

50K

10 Meg

-20 to +56dB

-20 to +56dB

-8 to +62dB

Continuity (Audible)



Battery Testing

1.5 & 9V




1.5 & 9V

Specifications
Manual Range Selection





Total Functions

5

6

7

Total Ranges

12

14

19

250 mA

250 mA

500 mA &10A

±5%

±4%

±4%

CAT Rating

II 300V

II 500V

II 1000V

Warranty

1 year

1 year

1 year

Fuse
Accuracy



General
Agency Approval

133

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Digital Multimeters
Full family of digital multimeters test AC Voltage, DC Voltage,
Resistance, Continuity, Temperature, Diodes, and Batteries.
• Manual and auto ranging styles.
• Easy to read digital displays.
• All testers include batteries, test leads, and
operating instructions.

Circuit Breakers

Batteries

Back-Lit Display

Magnetic Attachment

• Conforms to UL 61010-1 standards and certified to
CAN/CSA C22.2.

One Year
Warranty

GDT-311

GDT-3190

Feature

GDT-311

GDT-3190

GDT-3200

AC Voltage

500V

500V

500V

DC Voltage

600V

600V

600V

2 meg Ω

2 meg Ω

20 meg Ω

GDT-3200

Voltage Range

Functions
Resistance




Diode Test
Continuity (Audible)

1.5 & 9V

-40 to 1832°F
1.5V

Temperature (Probe type)
Battery Testing
Specifications
Manual or Auto Ranging

Manual

Manual

Auto

Total Functions

3

4

7

Total Ranges

13

14

7

Display Count

2000

2000

2000













Low Battery Indicator
Auto Off
Rubber Boot
Magnet Strap
Backlit LCD
General
Agency Approval
Drop Rating

3'

6'

6'

Crush Rating

150lb

150lb

150lb

III 600V

III 600V

III 600V

1 year

1 year

1 year

CAT Rating
Warranty

134

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Clamp-On Multimeters
Gardner Bender clamp meters test AC Current, AC Voltage, DC
Voltage, Resistance and Continuity.
• Manual and autoranging styles.
• Easy-to-read displays.
• All testers include batteries, test leads and operating
instructions.

Current (GCM-221)

Voltage (GCM-221)

Current (GCM-500)

Voltage (GCM-500)

• All are cULus or CE approved.

Feature

One Year

One Year

Warranty

Warranty

GCM-500

GCM-221

AC Voltage

600V

600V

DC Voltage

60V

Voltage Range

Patented

Current Range
AC Current

600A

600A

1000 Ω

200 Ω

Functions
Resistance




Continuity
Audible Buzzer
Specifications
Manual or Auto Ranging

Manual

Auto

Total Functions

4

3

Total Ranges

8

3

Display Count

1000

Data Hold





Jaw Size

11/2"

11/4"

Fuse

500 mA
AC V: ±1.5%

Accuracy

±5%

AC A: ±2.0%
Ω : ±1.0%

General
Agency Approval
Drop Rating

3'

6'

Crush Rating

150 Lb

150 Lb

CAT Rating
Warranty

II 600V, III 300V
1 year

1 year

135

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Analog Battery Tester
Tests all common batteries to determine if they
are charged or need replacement.

GBT-500A

• Tests from 1.5 V button cells to 22.5 V photo cells.
• Includes test leads for easy testing.
TESTS
 AA, AAA, C, D, N
 1.5 V button cells
 1.25 V Ni-Cad rechargeable
 3 V lithium
 22.5 V photo & lantern cells
 6 V lantern
 12 V, 15 V Photo cells
 9 Volt

One Year
Warranty

Analog Battery Tester
Tests most common household battery types
to determine existing charge.
• Moveable contact arm fits multiple
battery sizes.

GBT-3502

• Simple “Low/Good” indicator.
Movable contact
arm fits multiple
battery sizes

TESTS
 AA
 AAA
C
D
9V
 1.5 V button cells

One Year
Warranty

Test Leads
Replacement leads for Gardner Bender meters.
• Tough ABS construction.
• Flexible cords for easy use.
RTL-103
Part #

Description

Models

RTL-103

Small Test Leads

GMT-319, GDT-311, GDT-3190, GDT-3200

RTL-107

Push-on Alligator Clips

RTL-103, RTL-108, RTL-200

RTL-108

Mid-size Test Leads

GMT-312, GMT-318

RTL-200

Large Test Leads

GDT-292A, GDT-293A, GDT-294A, GDT-295A,
GCM-500, GCM-221

RTL-200

136

RTL-107

RTL-108

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Replacement Parts and Accessories
Test Instruments

Model

10
A
/2
50
V
0.
5A
/2
50
V
2.
0A
/2
50
V
0.
2A
/2
50
V
0.
25
A
/2
50
V
B
at
te
rie
s

FUSES

Analog Multimeters





GMT-312
GMT-318
GMT-319

(1) AA
(1) AA
(2) AAA

Digital Multimeters
GDT-311

(1) 9 Volt




GDT-3190
GDT-3200

(1) 9 Volt
(1) 9 Volt

Clamp Meters
GCM-221
GCM-500







(2) AAA
(1) AA

Probe Testers
GAT-3400
GBT-500A
GBT-3502
GCT-3304






(2) AAA

GCV-3206
GET-3100
GET-3202
GET-3206
GET-3213
GET-4220K

(2) AA & (3) LR44

GVD-3504

(1) AAA

GVD-3505

(2) 1.5 V LR44

GVT-392

137

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

NOTES

138

CABLE TIES

141

141

144

With a patented design and high-quality
construction, Gardner Bender cable ties

144

deliver 50% more tensile strength than
industry standard ties.

144

139

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Colored . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Grip Strip™ Hook-and-Loop Fasteners . . . . . . . . .144
Heavy Duty (Natural & Ultraviolet Black) . . . . . . .142
Miniature (Natural & Ultraviolet Black) . . . . . . . .141
Mounting Bases and Ties
(Natural & Ultraviolet Black) . . . . . . . . . . .143, 144
Releaseable (Natural & Ultraviolet Black) . . . . . .143
Standard (Natural & Ultraviolet Black) . . . . . . . . .141
Tensioning Tools . . . . . . . . . . . . . . . . . . . . . . . . . .144

140

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Miniature & Standard Cable Ties
Gardner Bender offers a broad range of cable ties, great for bundling
wire, cable, hoses, ducts and countless other applications.
• Made from durable nylon 6/6 material.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily for
outdoor use.
• Serviceable through temperatures -40 to 85 °C (-40 to 185 °F).
• UL recognized component listing E125869.
• Meets UL 94 V-2 flammability classification.
• Patented DoubleLock™ design has teeth on both sides of the
tie, ensuring 50% greater strength than industry standards.

®

E125869

TM

33%

UV

ST

RONGER

C

B
A

Miniature
Length
A
4"
4"

Width
B
0.095"
0.095"

18 lb

4"

0.095"

0.035"

3⁄16"

UR

18 lb

4"

0.095"

0.035"

3⁄16"

UR

—

18 lb

4"

0.095"

0.035"

3⁄16"

UR

46-104UVBM

1,000/bag —

18 lb

4"

0.095"

0.035"

3⁄16"

UR

Part #

Pkg Qty

Double
Lock™

Tensile
Strength

Length
A

Width
B

Natural

46-206

100/bag

DLOCK

45 lb

6.00"

0.13"

0.055"

13⁄8"

—

Natural

46-206M

1,000/bag DLOCK

45 lb

6.00"

0.13"

0.055"

13⁄8"

—

UVB

46-206UVB

100/bag

DLOCK

45 lb

6.00"

0.13"

0.055"

13⁄8"

—

Natural

45-308

20/bag

DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

Natural

46-308

100/bag

DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

Natural

46-308M

1,000/bag DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

Natural

46-507

500/bag

DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

UVB

45-308UVB

15/bag

DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

UVB

46-308UVB

100/bag

DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

UVB

46-308UVBM

1,000/bag DLOCK

75 lb

8.00"

0.17"

0.055"

2"

UR

Natural

45-312

12/bag

DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

Natural

46-310

100/bag

DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

Natural

46-310M

1,000/bag DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

Natural

46-311

300/bag

DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

Natural

46-210

100/bag

DLOCK

45 lb

11.00"

0.13"

0.055"

3"

—

UVB

45-312UVB

8/bag

DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

UVB

46-210UVB

100/bag

DLOCK

45 lb

11.00"

0.13"

0.055"

3"

—

UVB

46-310UVB

100/bag

DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

UVB

46-310UVBM

1,000/bag DLOCK

75 lb

10.90"

0.17"

0.055"

3"

UR

Natural

45-315

8/bag

DLOCK

75 lb

13.95"

0.17"

0.055"

4"

UR

Natural

46-315

100/bag

DLOCK

75 lb

13.95"

0.17"

0.055"

4"

UR

Natural

46-315M

1,000/bag DLOCK

75 lb

13.95"

0.17"

0.055"

4"

UR

UVB

45-315UVB

8/bag

DLOCK

75 lb

13.95"

0.17"

0.055"

4"

UR

UVB

46-315UVB

100/bag

DLOCK

75 lb

13.95"

0.17"

0.055"

4"

UR

UVB

46-315UVBM

1,000/bag DLOCK

75 lb

13.95"

0.17"

0.055"

4"

UR

Length Color
Natural
Natural

4"

Double
Lock™
—
—

Part #
45-104
46-104

Pkg Qty
40/bag
100/bag

Natural

46-104M

1,000/bag —

UVB

45-104UVB

30/bag

—

UVB

46-104UVB

100/bag

UVB

Tensile
Strength
18 lb
18 lb

Thickness Bundle
C
Dia. Max.
3⁄16"
0.035"
3⁄16"
0.035"

UL
UR
UR

Standard
Length Color

6"

8"

11"

14"

Thickness Bundle
C
Dia. Max.

UL

141

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Heavy-Duty Cable Ties
Heavy-duty design offers 120 and 175 lbs of tensile strength.
• Patented DoubleLock™ design (on 120 lb) ensures 50%
greater tensile strength.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily
for outdoor use.

®

E125869

UV
C

B
A

Part #

Pkg Qty

Double
Lock™

Tensile
Strength

Length
A

Width
B

Natural

46-408

100/bag

DLOCK

120 lb

8.00"

0.25"

.072"

2"

UR

UVB

46-408UVB

100/bag

DLOCK

Natural

46-412

100/bag

DLOCK

120 lb

8.00"

0.25"

.072"

2"

UR

120 lb

12.00"

0.25"

.072"

3"

UVB

46-412UVB

100/bag

UR

DLOCK

120 lb

12.00"

0.25"

.072"

3"

Natural

45-515

UR

10/bag

DLOCK

120 lb

15.00"

0.25"

.072"

4"

Natural

UR

46-415

50/bag

DLOCK

120 lb

15.00"

0.25"

.072"

4"

UR

UVB

45-515UVB

10/bag

DLOCK

120 lb

15.00"

0.25"

.072"

4"

UR

UVB

46-415UVB

50/bag

DLOCK

120 lb

15.00"

0.25"

.072"

4"

UR

Natural

45-518

10/bag

—

175 lb

17.00"

0.35"

.07"

4.90"

UR

Natural

46-418

50/bag

—

175 lb

16.93"

0.35"

.07"

4.90"

UR

UVB

46-418UVB

50/bag

—

175 lb

16.93"

0.35"

.07"

4.90"

UR

UVB

45-518UVB

10/bag

—

175 lb

17.00"

0.35"

.07"

4.90"

UR

Natural

45-521

10/bag

—

175 lb

20.70"

0.35"

.07"

5.5"

UR

Natural

46-421

50/bag

—

175 lb

20.78"

0.35"

.07"

5.51"

UR

UVB

46-421UVB

50/bag

—

175 lb

20.78"

0.35"

.07"

5.51"

UR

UVB

45-521UVB

10/bag

—

175 lb

20.70"

0.35"

.07"

5.5"

UR

Natural

45-524

10/bag

—

175 lb

23.97"

0.35"

.07"

7"

UR

Natural

46-424

50/bag

—

175 lb

23.97"

0.35"

.07"

7"

UR

UVB

46-424UVB

50/bag

—

175 lb

23.97"

0.35"

.07"

7"

UR

UVB

45-524UVB

10/bag

—

175 lb

23.97"

0.35"

.07"

7"

UR

Natural

46-330

25/bag

—

175 lb

30.50"

0.35"

.07"

9"

UR

UVB

46-330UVB

25/bag

—

175 lb

30.50"

0.35"

.07"

9"

UR

Natural

45-536

10/bag

—

175 lb

35.91"

0.35"

.07"

10.30"

UR

Natural

46-436

50/bag

—

175 lb

35.91"

0.35"

.07"

10.30"

UR

UVB

45-536UVB

10/bag

—

175 lb

35.91"

0.35"

.07"

10.30"

UR

UVB

46-436UVB

50/bag

—

175 lb

35.91"

0.35"

.07"

10.30"

UR

Natural

45-548

10/bag

—

175 lb

48.00"

0.35"

.07"

14.30"

UR

Natural

46-448

50/bag

—

175 lb

48.00"

0.35"

.07"

14.30"

UR

UVB

45-548UVB

10/bag

—

175 lb

48.00"

0.35"

.07"

14.30"

UR

UVB

46-448UVB

50/bag

—

175 lb

48.00"

0.35"

.07"

14.30"

UR

Length Color

8"
12"

15"

17"

21"

24"

30"

36"

48"

142

Thickness Bundle
C
Dia. Max.

UL

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Releasable Cable Ties
Temporarily fastens wires, cables and hoses.
• Extended releasable tab in the head makes for easy release
and reusability.
• Great for temporary work or where frequent servicing is required.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily for
outdoor use.
Releasable Tab

®

E125869

UV
C

B
A

Length Color

8"
16"
22"
28"

Natural

Part #

Pkg Qty

Double
Lock™

Tensile
Strength

47-108

25/bag

—

50 lb

Length
A

Width
B

8.00"

0.17"

Thickness Bundle
C
Dia. Max.
0.05"

1.75"

UL
UR

UVB

47-108UVB

25/bag

—

50 lb

8.00"

0.17"

0.05"

1.75"

UR

UVB

47-115UVB

4/bag

—

175 lb

15.25"

0.52"

0.09"

4"

UR

UVB

47-121UVB

3/bag

—

175 lb

21.50"

0.52"

0.09"

6"

UR

UVB

47-127UVB

3/bag

—

175 lb

27.75"

0.52"

0.09"

8"

UR

Mounting Cable Ties
Secures bundles to walls, studs or other surfaces easily.
• Accepts #10 screws.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily for
outdoor use.

®

E125869

UV

C

B
A

Length Color
Natural

8"

14"

Part #

Pkg Qty

Double
Lock™

Tensile
Strength

45-308MT

20/bag

—

50 lb

100/bag

Length
A

Width
B

8.63"

0.17"

Thickness Bundle
C
Dia. Max.

UL

0.055"

2"

UR
UR

Natural

48-308

—

50 lb

8.63"

0.17"

0.050"

13⁄4"

UVB

45-308MTUVB 15/bag

—

50 lb

8.63"

0.17"

0.055"

2"

UR

UVB

48-308UVB

100/bag

—

50 lb

8.63"

0.17"

0.055"

13⁄4"

UR

Natural

48-315

100/bag

—

50 lb

14.63"

0.17"

0.055"

4"

UR

UVB

48-315UVB

100/bag

—

50 lb

14.63"

0.17"

0.055"

4"

UR

143

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Colored Cable Ties
Colored cable ties fasten wire for easy bundle identification.
• Patented DoubleLock™ design ensures 50% more tensile strength
than industry standards.
• Flexible nylon material allows cable ties to remain serviceable
through temperature ranges of -40 to 185 °F (-40 to 85 °C).
• Recognized under component program of UL, E125869.
®

• Meets flammability classification UL 94 V-2.

E125869

C

B
A

Part #

Pkg Qty

Double
Lock™

Tensile
Strength

Flr Blue

45-308FB

20/bag

DLOCK

75 lb

Flr Green

45-308FG

20/bag

DLOCK

75 lb

8"

0.17"

0.055"

2"

UR

Flr Yellow

45-308FY

20/bag

DLOCK

75 lb

8"

0.17"

0.055"

2"

UR

Green

45-308G

20/bag

DLOCK

75 lb

8"

0.17"

0.055"

2"

UR

Green

46-308G

100/bag

DLOCK

75 lb

8"

0.17"

0.055"

2"

UR

Length Color

8"

Length
A

Width
B

8"

0.17"

Thickness Bundle
C
Dia. Max.
0.055"

2"

UL
UR

Mounting Bases
UV

• Adhesive-backed mounting bases for securing wire and
cable bundles.
• Center screw hole for extra holding power.
• Molded with durable nylon 6/6 material.
• Four-sided insertion design for mounting flexibility.
Part #

Pkg Qty

Size

Fits Widths UR Recommended Cable Ties Color

45-MB

5/bag

1" x 1"

.10" - .17"

UL

18 lbs to 75 lbs

Natural

45-MBUVB 5/bag

1" x 1"

.10" - .17"

UL

18 lbs to 75 lbs

Black

MB-20

1" x 1"

.10" - .17"

UL

18 lbs to 75 lbs

Natural

100/bag

Economy Cable Tie Tensioning Tool
Tightens and cuts off cable ties.
• Quick twist snaps off excess length.
• Use for all cable ties up to 75 lbs tensile strength.
• Lightweight, economical.
Part #

Description

CTT-45

Economy Cable Tie Tensioning Tool

Grip-Strip™ Hook-and-Loop Fasteners
Reusable strip fastens wires and cables.
• Wrap excess around bundle – no waste.
• Great for home/office, tools and electronics.
• Cinch tab allows attachment to cable or cord.
Length Part #
8" 45-V8BK

144

11"
15"

Pkg Qty
5/bag

Color
Black

45-V11BK

5/bag

Black

45-V15BK

3/bag

Black

STAPLES

148

149

151

From low voltage wire to service entrance
cables, professionals rely on Gardner

150

Bender for a complete line of staple and
fastening solutions.

149

145

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Category 3 & 5 Data Staples . . . . . . . . . . . . . . . . .151
Coaxial Cable Staples . . . . . . . . . . . . . . . . . . . . . .151
Conduit Straps . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Fiber-Insulated Staples . . . . . . . . . . . . . . . . . . . . .152
Insulated Metal Staples . . . . . . . . . . . . . . . . . . . . .148
Low Voltage Wire Staples . . . . . . . . . . . . . . .150, 152
Masonry Staples . . . . . . . . . . . . . . . . . . . . . .150, 151
Metal Staples . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
MultiCable Staples . . . . . . . . . . . . . . . . . . . . . . . .149
Plastic Staples . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Roofing Staples . . . . . . . . . . . . . . . . . . . . . . . . . .151
Service Entrance Staples . . . . . . . . . . . . . . . . . . .148
Service Entrance Straps . . . . . . . . . . . . . . . . . . . .150
Staple Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

146

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Cable Boss™ Staple Gun
• Secures 120V & low-volt cable: Romex®, Coaxial & CAT 5 from the same tool.
• Comfort grip areas for 2-handed operation.
• Easy trigger force.
• Ergonomic handle.
• Secures round and flat cable.
• 3 sizes covering: NM, Coax, Voice/Data, Low Volt.
Comfort & ergonomic handle design
Easy lever action

MSG-501
Rugged construction
Survives 10 ft drop!

Front grip area for two
handled operation

Staple refill window to
view remaining staples

Rear guide for added cable
control reduces cable twisting

Reversible cable guide
for easy cable stapling
change over

Size

⁄16"

5

Part #

Pkg Qty Color Application

MPS-2080

250/box

Voice/Data: CAT 5e
Blue

Speaker Wire: 16/2, 16/4, 12/2 (standard and in-wall styles)
Security Wire: 18/4
Coax: RG-6

⁄8"

3

MPS-2100

200/box

White

Voice/Data: CAT 6
NM Cable: 14/2, 14/3, 12/2

⁄2"

1

Coax: RG-6 Quad Shield
MPS-2125

200/box

Black

NM Cable: 10/2, 12/3
Structured Cabling: Siamese CAT 5e, Siamese CAT 5e and 16/4 Speaker wire

Romex® is a registered trademark of Southwire Company, Carrollton, GA

147

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Metal Staples
Secures Romex® wire and other types of non-metallic (NM) cable.
• Recessed head drives faster and protects cable insulation.
• Pointed legs drive in straight; will not split wood.
• Preferred length.
• Virtually “Oil-Free” for cleaner handling.
• Sharper tips for easy starting.
Dims W x L Part #

⁄2"

1

Pkg Qty

Application

Dims W x L Part #

24/card

MS-1575

18/card

MS-1555

50/card

MS-1577

50/card

MS-150

100/box

MS-175

100/box

MS-150J

150/jar

MS-175J

150/jar

MS-500J

500/jar

MS-450J

450/jar

MS-550

500/box

MS-575

500/box

MS-950B

5,000/bucket

MS-975B

4,000/bucket

14/2, 12/2, 10/2

⁄16"

9

MS-950BU 10,000/bucket

Insulated Metal Staples
Secures and protects non-metallic (NM), BX, MC, AC and UF cable.
• Insulator made from durable polyethylene.
• Plastic insulator protects cables and helps prevent arc faults.
Dims W x L Part #

⁄2"

1

Pkg Qty

MSI-1525

15/card

MSI-50B

50/bag

MSI-150

100/box

MSI-200J

200/jar

MSI-550

500/box

MSI-950B

4,000/bucket

Application

14/2 & 12/2 cable

Service Entrance Staples
Secures Service Entrance cables.
• Pointed offset legs drive in straight.
• Will not split wood.
Dims W x L

Part #

Pkg Qty

⁄16" x 1 ⁄ "
11⁄8" x 1 ⁄ "

GSE-15310

10/card

GSE-310

100/box

GSE-15410

10/card

GSE-410

100/box

15⁄8" x 21⁄8"

GSE-710

100/box

3

3

8

1

148

2

Pkg Qty

MS-1550

Application
SEU #6/3 with ground
4/3 and 2/3 SE cable
4/0 SE, Large BX, Romex®, Greenfield

Romex® is a registered trademark of Southwire Company, Carrollton, GA

Conductor

14/3, 12/3, 10/3

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Plastic Staples
Secures Romex®, UF and other types of non-metallic (NM) cable.

®

• Fast and easy to install – both zinc-plated nails drive together
without splitting wood.
• Nail heads are recessed for minimum exposure.
• Smooth saddles prevent damage to insulation.
14 Gauge

• UV-resistant polyethylene saddles will not rust, rot or deteriorate.

Size

⁄2"

1

Part #

Pkg Qty

Color

Part #

Pkg Qty

Color

PS-1550

15/card

White

Application

Size

PS-1575

15/card

White

PS-50

50/bag

White

PS-75

50/bag

White

PS-150

100/box

White

PS-175

100/box

White

PS-150Z

100/bag

White

PS-175Z

100/bag

White

PS-150ZJ

100/jar

White

PS-175ZJ

175/jar

White

PS-225J

225/jar

White

PS-275

250/bag

White

PS-250

250/bag

White

PS-575

500/box

White

PS-550

500/box

White

PS-750B

2,000/bucket

White

⁄4"

3
14/2, 12/2,
10/2

Application

14/3, 12/3,
10/3

MultiCable Staples
Organizes and secures multiple cable runs on a stud.
• Secures NM/Romex®, coaxial and CAT 5 all on the same staple.
• Snap lock gate quickly and easily secures all cables.
• Self-centering tab guides perfect placement on the stud.
• Secures with a nail or staple for wood studs, a screw for
metal studs.
Part #

Pkg Qty

Stud Type

MCS-20W

20/box

Wood/Metal (8) NM-B Flat 14-2

MCS-100W 100/box

Cable Combinations

Wood/Metal (8) NM-B Flat 12-2
(4) NM-B Flat 10-2

®

(2) NM-B Round 14-3
(2) NM-B Round 12-3

®

(10) RG-59
(8) RG-6
(10) CAT-5

Clip-on Plastic Staples
Secures Romex®, UF and other type-NM cable.
• Fast and easy to install – both zinc-plated nails drive together.
• Hardened nails can penetrate cement block, mortar or plaster surfaces.
®

• Nail heads are recessed for minimum exposure.
• Smooth saddles prevent damage to cable insulation.
• UV-protected polyethylene saddle resists rot, rust and deterioration.
Size Part #

⁄2"
⁄4"

1
3

Pkg Qty

Type

PSM-1550 25/clam

Masonry

PSO-1525 25/clam

Wood

PSO-1575 25/clam

Wood

Application
14/2, 12/2, 10/2
14/3, 12/3, 10/3

149

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Service Entrance Cable Straps
Plastic insulated straps quickly and easily secure service entrance cable.
• Electro-zinc plated nails provide strength and durability.
• Polyethylene straps stabilized against UV rays and extreme cold;
withstand deterioration and breakage.

Part #

Pkg Qty

Application

Part #

Pkg Qty

Application

GSE-105

5/card

#6 SEU

GSE-304

4/card

#2 SER

GSE-170

70/box

#6 SEU

GSE-330

30/box

#2 SER

GSE-205

5/card

#2 SEU

GSE-402

2/card

#4/0 SEU

GSE-250

50/box

#2 SEU

GSE-505

5/card

#6 SER

SER

®

SEU

Conduit Plastic Straps
Enables secure fastening of plastic electrical conduit,
schedule 40 PVC, copper tubing, etc.
• Heavy-duty polyethylene resists deterioration from UV rays
and breakage from extreme cold.

Size Dia.

Part #

Pkg Qty

Application

Size Dia.

Part #

Pkg Qty

Application

.840"

GCC-120

6/card

1

1.66"

GCC-410

10/bag

11⁄ 4" conduit

1.05"

GCC-220

20/bag

3

⁄ 4" conduit

1.9 "

GCC-510

10/bag

11⁄ 2" conduit

1.315"

GCC-310

10/bag

1" conduit

2.375"

GCC-610

10/bag

2" conduit

⁄ 2" conduit

Low Voltage Plastic Staples

Masonry Low Voltage Staples

Secures bell, speaker, thermostat and
telephone wire.

Secures bell, speaker, thermostat and
telephone wire.

• For inside and outside applications.

• Hardened nails can penetrate cement block,
mortar or plaster surfaces.

• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist rust and corrosion.

• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist rust and corrosion.

data
com

Size

⁄16"

3

⁄16"

3

150

Part #

Pkg Qty

Color

Size

Part #

Pkg Qty

Color

PLT-1525

25/clam

Tan

3

PMC-1525W

25/clam

White

PLW-1525

25/clam

White

PMB-1525

25/card

Black

PMW-100

100/box

White

PSW-200J

200/jar

White

PSB-1600

25/card

Black

PSW-1600

25/card

White

PSB-160

100/card

Black

PSW-160

100/card

White

⁄ 16"

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Category 3 & 5 Data Staples

Masonry Category 3 & 5
Data Staples

Secures RJ-11, RJ-12, RJ-45, Category 3 and
Category 5 wire.

Secures and protects RJ-11, RJ-12, RJ-45,
Category 3 and Category 5 wire.

• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.

• Hardened nails can penetrate cement block,
mortar or plaster surfaces.

• Zinc-plated nails resist rust and corrosion.

• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist
rust and corrosion.

Part #

Pkg Qty

Color

PTP-25

25/clam

Blue

PTP-250J

300/jar

Blue

data
com

Part #

Pkg Qty

Color

PTM-25

25/clam

Blue

data
com

Coaxial Cable Staples
Secures RG-59 and RG-6 coaxial cables.
• UV-resistant polyethylene saddle.
• For indoor and outdoor applications.
• Zinc-plated nails resist rust and corrosion.
PCC-1525
Size

⁄4"

1

PSB-1650

data
com

PSG-15

Part #

Pkg Qty

Color

Size

Part #

Pkg Qty

Color

PSB-1650

25/card

Black

1

25/clam

Black

PSW-1650

25/card

White

PCC-300

300/jar

Black

PSB-165

50/card

Black

PSG-15

15/card

Gray

PSW-165

50/card

White

⁄4"
7
⁄16"*

PCC-1525

PSG-100

100/box

Gray

PSB-100

100/box

Black

*For RG-8, triaxial and up to 25 pairs UTP cable

PSW-100

100/card

White

Coaxial Masonry Staples

Coaxial Roofing Staples

Secures RG-59 and RG-6 coaxial cables.

Secures RG-59 and RG-6 coaxial cables.

• Hardened nails can penetrate cement block,
mortar or plaster surfaces.

• Extra-long nail accommodates
roofing applications.

• UV-Protected.

• UV-resistant polyethylene
saddles will not rust, rot
or deteriorate.
• Zinc-plated nails resist
rust and corrosion.

data
com

data
com
Size

⁄4"

1

Part #

Pkg Qty

Color

Size

Part #

Pkg Qty

Color

PCS-1525

25/card

Black

1

PSR-25

25/card

Black

PCS-100

100/box

Black

PCS-1600

25/clam

Black

PCS-300B

300/jar

Black

⁄4 "

151

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Double Coaxial Staples

Double Coaxial Masonry Staples

Secures multiple RG-59, RG-59 quad shield,
RG-6 and RG-6 quad shield wire.

Secures multiple RG-59, RG-59 quad shield,
RG-6 and RG-6 quad shield wire.

• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.

• Hardened nails can penetrate cement block,
mortar and plaster surfaces.

• Zinc-plated nails resist
rust and corrosion.

• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.

data
com
Size

Part #

Pkg Qty

Color

Size

Part #

Pkg Qty

Color

1

PDS-1525B

25/clam

Black

1

PDC-1525B

25/clam

Black

⁄4 "

Low Voltage
Fiber Insulated Staples
Secures bell, speaker, telephone and
thermostat wire.
• Insulates and protects cable.

Size

⁄8"

1

Part #

Pkg Qty

Color

MSB-1540 40/card

Brown

MSW-1540 40/card

White

Kwik Mount Staples
Fastens and guides wires.
• Wires easily snap in or out of two usable sides.
• Accommodates Category 5 wire.
• Use to secure holiday light sets, sound system
wires, etc.

Size

⁄8" x 3⁄16" x 1⁄4"

7

152

data
com

Part #

Pkg Qty

PWS-1525

25/card

⁄4 "

WIRE MANAGEMENT

155

156

158

As the needs of professional
electricians change in managing wire

161

and cable, Gardner Bender continues
to deliver innovative solutions for
their everyday needs.

159

153

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Anchor Kit - Plastic Conical . . . . . . . . . . . . . . . . .162
Box Supports/Spacers . . . . . . . . . . . . . . . . .161, 163
Cable Clamps - Plastic . . . . . . . . . . . . . . . . . . . . .158
Cable Clamps - Rubber Insulated . . . . . . . . . . . . .158
Duct Seal Compound . . . . . . . . . . . . . . . . . . . . . .160
Hanger Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Heat-Shrink Tubing - Thin Wall Polyolefin . . . . . .156
Heat-Shrink Tubing - Colored PVC . . . . . . . . . . . .156
Heat-Shrink Tubing - Heavy-Wall . . . . . . . . . . . . .157
Knockout Seals . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Reference Book - "Wiring Simplified" . . . . . . . . . .163
Reference Book - "Ugly's Electrical References" . .163
Screw Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Spiral Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Split Flex Tubing . . . . . . . . . . . . . . . . . . . . . . . . . .157
Stud Insulators . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Tape - Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Tape - Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Tape - Silicone Self-Sealing . . . . . . . . . . . . . . . . .155
Tape - Liquid Electrical . . . . . . . . . . . . . . . . . . . . .155
Wire Markers - Pocket Pack . . . . . . . . . . . . . . . . .161

154

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Electrical Tape
Quality electrical tape designed for general purpose
electrical applications.
• Made from low-lead PVC material.
• For applications up to 600 V.
• Temp rating up to 80 °C (176 °F).
Part #

Pkg Qty

Sleeve Qty

GTP-307
GTP-307D

1/roll
1/card

10/sleeve
––

Width Length Color
3

––

3

⁄4"
⁄4"
3
⁄4"
3
⁄4"
3
⁄4"
3
⁄4"
3
⁄4"
3
⁄4"
3
⁄4"
3
⁄4"

60'

Black

60'

Black

⁄2"

20'

⁄4"
⁄4"

30'
30'

⁄4"

30'

3

Black
Black

®

(w/Dispenser)

GTP-307WD 1/card

Black - Weather Resistant
(w/Dispenser)

GTP-607

1/roll

10/sleeve

3

GTP-607P

1/puck

––

3

GTB-667P

1/puck

––

GTN-667P

1/puck

––

GTO-667P

1/puck

––

GTG-667P

1/puck

––

GTR-667P

1/puck

––

GTW-667P

1/puck

––

GTY-667P
GTPC-512

1/puck
5/card

––
––

5/clam

––

60'

Blue

66'

Brown

66'

Orange

66'

Green

66'

Red

66'

White

66'
12'

Yellow
Assorted
(Red, White, Blue, Green, Yellow)

GTPC-550

1

Assorted
(Red, White, Blue, Green, Yellow)

Friction Tape
Black friction tape with matted finish, available in two lengths.
• Matted finish provides the best gripping surface available.
• Use over electrical splices, wrapping grips or sporting goods.
• Available in two lengths: 30' or 60'.
Part #

Pkg Qty

Description

GTF-300

1/roll

3

GTF-600

1/roll

3

⁄4" wide, 30' long
⁄4" wide, 60' long

Silicone Self-Sealing Tape
High quality tape that insulates all shapes of conductors to 400 V.
• Insulates and seals surfaces from -65 °C to 260 °C (-85 °F to 500 °F).
• Fuses to itself in seconds to stay watertight.
• Permanent mold in 24 hours or in minutes with heat application.
Part #

Pkg Qty

Description

HTP-1010

1/roll

1" wide, 10' long

Liquid Electrical Tape
A liquid coating used to insulate and protect electrical splices
and connections.
• Waterproof, will not unravel or deteriorate like traditional tape.
• Great for home, auto/marine and electrical applications.
• Indoor/outdoor.
• Brush-on applicator included.
Part #

Pkg Qty

Color

LTB-400

4 oz/can

Black

LTR-400

4 oz/can

Red

155

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Thin-Wall Heat-Shrink Tubing – Polyolefin
Great for cable insulation, marking and bundling, with superior
mechanical, abrasion and moisture protection.
• Flame retardant.
• Resists common fluids and solvents.
• Meets UL 224, 125 °C; CSA C22.2 No. 198.1, 125 °C; MIL-DTL-23053/5,
Class 1 & 2, AMS 3636 & 3637; DEF STAN 59-79, Issue 3 Type 2a.
• Continuous operating temperature: -55 °C (-67 °F) - 135 °C (275 °F).
• Shrink temperature: 120 °C (250 °F) - 250 °C (480 °F).
• 600 V/Mil Dielectric strength.
• 2:1 shrink ratio.

Polyolefin

Part #

Inside Diameter
Pkg Qty Before Finished Length

HST-093

8 pcs

3

HST-125

7 pcs

1

1

4"

HST-187

8 pcs

3

3

4"

HST-250

6 pcs

1

1

4"

HST-375

3 pcs

3

3

4"

HST-500

3 pcs

1

1

4"

HST-750

2 pcs

3

3

4"

HST-999

2 pcs

1"

1

4"

⁄ 32"

3

4"

⁄ 64"

⁄ 8"

⁄ 16"

⁄ 16"

⁄ 32"

⁄ 4"

⁄ 8"

⁄ 8"

⁄ 16"

⁄ 2"

⁄ 4"

⁄ 4"

⁄ 8"
⁄ 2"

Conductor Gauge AWG*
24 22 20 18 16 14 12 10 8 6 4 2 1 1/0 2/0 3/0 4/0

•

®

• • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • • •
• • •

⁄ 8", 3⁄ 16", 1⁄ 16", 3⁄ 32", 4"
1⁄ 4"
1⁄ 8"
* Sizes shown are approximate and may vary according to manufacturer and insulation system for each wire.
HST-AST

8/card

1

Colored Heat-Shrink Tubing – PVC
Great for general-purpose applications.
• Flame retardant.
• Meets UL 224 VW-1; CSA C22.2
No. 198.1 OFT.
• Continuous operating temperature:
-30 °C (-22 °F) - 105 °C (220 °F).
• Shrink temperature: 110 °C (230 °F).

PVC

Inside Diameter
Before Finished Length
3
3
⁄ 16"
⁄ 32"
8'

Part #
HST-100

Pkg Qty
8'/clam

HST-101

8'/clam

1⁄ 4"

1⁄ 8"

8'

HST-102

8'/clam

5

5

8'

HST-107

(7)-3" pieces/
clam

⁄ 16"

1

⁄ 8", 1⁄ 4",
3⁄ 8", 1⁄ 2"

⁄ 32"

Conductor Gauge AWG*
24 22 20 18 16 14 12 10 8 6 4 2

• • • • •
• • • • •
• • • • •

(7)3" pcs

* Sizes shown are approximate and may vary according to manufacturer and insulation system for each wire.

156

®

HST-107

HST-101

1 1/0 2/0 3/0 Color
Red
Blue
Yellow
Assorted
(Red, Blue, Yellow)

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Heavy-Wall Heat-Shrink Tubing
Provides maximum reliability for insulating and protecting wire,
cables and terminations.
• High impact, abrasion and corrosion resistance.
• Submersible and great for direct burial installations.
• Inner adhesive bonds to plastics, rubber,
neoprene, steel, polyethylene.
• Continuous operating temperature: -55 °C (-67 °F) - 125 °C (257 °F).
• Shrink temperature: 120 °C (250 °F).
Inside Diameter
Before
Finished

Part #

Pkg Qty

HWT-0722

1/bag

3

7

6"

HWT-1138

1/bag

13⁄ 32"

3

6"

HWT-1550

1/bag

11⁄ 2"

1

6"

⁄ 4"

⁄ 32"
⁄ 8"
⁄ 2"

Length

®

Split Flex Tubing
Protects hoses, wire and cables from cuts,
abrasions and UV wear.
• Excellent for managing cords for electronics,
under hood or trailer wiring.
• Corrugated for added flexibility.
• Split down the center for wire breakout where needed.

Part #

Inside Dia.

Length

Color

Pkg Qty

FLX-3810

3

10'

Black

1/bag

FLX-5007

1

⁄ 2"

7'

Black

1/bag

FLX-757GR

3⁄ 4"

5'

Gray

1/bag

FLX-1007

1"

5'

Gray

1/bag

⁄ 8"

Spiral Wrap
Manages wire and cable neatly and allows for cable to
break out at desired locations.
• Made from flexible polyethylene.
• Protects cables from cuts, abrasions and UV wear.

Part #

Description

Color

FSP-AST

Assorted

Clear

Includes:
Qty Description

Inside Dia.

1

4' length

3

1

4' length

1

⁄ 8"
⁄ 8"

157

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Plastic Cable Clamps
Holds harnesses, cables and tubing.
• Used for construction, maintenance and assembly-line operations.
• Use in control cabinets, panels and general applications.
• Tough, durable, yet extremely lightweight.
• Working temperature range: -54 °C (-66 °F) to 170 °C (340 °F).
• Clean, smooth edges for easy handling.
• Fast installation.
Part #

Dimensions
Pkg Qty A dia. B

PPC-1525

C

D

E width

Color

18/card

1

25

1

3

3

Natural

PPC-1525UVB 18/card

1

25

1

3

3

Black

PPC-1538

15/card

3

31

1

3

3

Natural

PPC-1538UVB 15/card

3

31

1

3

3

Black

PPC-1550

12/card

1

35

3

3

3

Natural

PPC-1550UVB 12/card

1

35

⁄ 64"

3

3

3

Black

PPC-1575

3

3

⁄ 64"

3

3

1

Natural

3⁄ 4"

3⁄ 64"

3⁄ 32"

3⁄ 64"

1⁄ 2"

Black

1"

51⁄ 64"

3⁄ 32"

3⁄ 64"

1⁄ 2"

Natural

6/card

PPC-1575UVB 6/card
PPC-1600

4/card

⁄ 4"
⁄ 4"
⁄ 8"
⁄ 8"
⁄ 2"
⁄ 2"
⁄ 4"

⁄ 64"
⁄ 64"
⁄ 64"
⁄ 64"
⁄ 64"

⁄ 32"
⁄ 32"
⁄ 32"
⁄ 32"
⁄ 64"
⁄ 64"
⁄ 32"

⁄ 64"
⁄ 64"
⁄ 64"
⁄ 64"
⁄ 64"
⁄ 64"
⁄ 64"

⁄ 8"
⁄ 8"
⁄ 8"
⁄ 8"
⁄ 8"
⁄ 8"
⁄ 2"

A

13/
64

Secures wire and cable in industrial, auto/marine and where vibrations may occur.
• Flexible 1⁄2" wide body.
• Secure with 1⁄4" screw.
Part #

Size

Pkg Qty

PPR-1550

1

2 pcs

PPR-1575

3

2 pcs

PPR-1600

1"

1 pc

⁄ 2"
⁄ 4"

Plastic Kwik Clips
Mount bundles, cables, cords, tools etc. to drywall,
wood and painted surfaces.
• Ratcheting/releasable feature allows adjustment
to a range of bundle diameters.
• Adhesive backed.

158

Part #

Pkg Qty Description

GKK-1538

6/card

Color

Holds 3⁄ 8" Cable Natural

GKK-1538UVB 6/card

Holds 3⁄ 8" Cable Black

GKK-1550

4/card

Holds 1⁄ 2" Cable Natural

GKK-1575

2/card

Holds 3⁄ 4" Cable Natural

A
B

Rubber Insulated Clamps
• Corrosive-resistant plated steel clamp.

E

D

C

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Stud Insulators
One piece design insulating 360° protection for cable runs
through metal studs.
• Fits all pre-punched and field punched hole sizes and configurations.
• Unique folding tabs for fast, one-handed installations.
• Meets NEC article 300-4(b) and CEC rule 12-516.
Part #

Pkg Qty

Description

SI-25

25/bag

Metal Stud Insulators

®

SEE PG

FOR MORE INFO ON

106

Stud Punch

Knockout Seals (1⁄ 2" to 4")
Easy-to-use metal knockout seal.
• Fast and easy to install from inside or outside of box.
• Embossed for quick self-centering in unused knockouts.
One screw holds seal in place.
• Made of rust-proofed, cold-rolled galvanized steel.
Screw and bar are zinc-plated.
• Marked for size and catalog number for easy identification.
• 16-gauge steel.

Part #

Pkg Qty For Knockout Dia

701

100/box

1⁄ 2"

705

10/box

11⁄ 2"

701C

5/clam

1⁄ 2"

706

10/box

2"

702

50/box

3

707

10/box

21⁄ 2"

702C

3/clam

3

708

10/box

3"

703

25/box

1"

709

10/box

31⁄ 2"

704

25/box

11⁄ 4"

710

10/box

4"

⁄ 4"
⁄ 4"

Part #

Pkg Qty For Knockout Dia

SEE PG

98

FOR MORE INFO ON

Hydraulic Drivers
& Pull Studs

Snap-In Seals (1⁄ 2" to 2")
Convenient snap-in feature for quick installation.
• Zinc-plated to resist corrosion.
Part #

Pkg Qty

For Knockout Dia.

601

100/box

1

602

100/box

3

603

50/box

1"

⁄ 2"
⁄ 4"

SEE PG

FOR MORE INFO ON

101

Knockouts

159

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Galvanized Hanger Strap

Saf-Te-Plate™ Protectors

For hanging or fastening conduit, pipe
or cables.
• Flexible for easy use.

Protects cable and plastic pipe from nail punctures.
• Plate attaches to wood studs with a single
hammer blow.
• Required for compliance with NEC 1990
Article 300-4A.

Part #

Pkg Qty

Description

Part #

Pkg Qty

GHS-1510

1/card

10' x 3⁄ 4" x 20 gauge

FP159-3

100/box

11⁄ 2" x 3" x 16 gauge Metal Safety Plate

FP159-6

50/box

11⁄ 2" x 6" x 16 gauge Metal Safety Plate

Duct Seal Compound
Seals conduit openings against drafts, dust, moisture and noise.
• Protects terminal boxes, pot heads and bushings from corrosive elements.
• Deadens switch gear panel noise.
• Dough-like compound is easily “thumbed” over holes and gaps.
• Will not harden or form a skin under normal conditions.
• Not for use outdoors.
• Specifications:
- Viscosity: ASTM D-217 300-gram load - 7.0 -11.0; ASTM DS-S2
100-gram load - 9.0 -15.0
- Temperature Range: Adheres at -20 °F (-29 °C). Will not slump after
1 hr. at 350 °F (175 °C).
- Flash Point: Over 550 °F (285 °C).
- Other Properties: Non-conducting, non-deteriorating, non-toxic,
non-corrosive, non-staining, non-curable; 99% solid, coil-based.

160

Part #

Pkg Qty

Description

DS-130

30 pugs

1 lb Pugs

DS-530

6 pugs

5 lb Pugs

Description

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Pocket Pack Wire Markers
Pocket-sized booklets of cloth wire markers and matching
terminal markers.
• Saves time and money during all on-site and in-plant initial hookup,
troubleshooting, maintenance and repair.
• Nylon-impregnated cloth resists moisture, dirt and oil.
• Non-smear legends assure high visibility for instant,
positive identification.
• Matching terminal marker with every wire marker, plus an extra page
of blank write-on wire and terminal markers for special legends.
Part #

Marker Legends

Qty

42-027

0-9

45/ea

42-028

A-Z

10/ea

0 - 15

10/ea

Symbols: +, -, /

10/ea

42-029

1 - 45

10/ea

42-030

46 - 90

10/ea

42-035

1 - 15

6/ea

16 - 90

4/ea

A-Z

2/ea

Symbols: +, -, /, 0

2/ea

42-ALPHA Circuit Breaker Box Marker Book

Box Supports
Saves time for installing outlet or switch boxes.
• Screwless support for ease of use.
• Simple to use:
1. Mark corners of box position and drill four 1⁄ 2" holes.
2. Saw between holes to make box opening.
3. Place box into opening.
4. Slip box supports into openings alongside box;
one with long end up, the other down.
5. Bend fingers of box supports into box while firmly
pressing box against wall.

Part #

Pkg Qty

Description

800

25 sets/box

Box Support Set (pair)

®

161

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Electrician's Screw Kits
Assorted sizes & lengths of commonly used electrical machine screws.
• Slotted round-head screws for switches, receptacles and
outlet applications.
• Slotted flat-head screws for all-purpose electrical fastening.

Part #

Pkg Qty Type

Contents

SK-832

370 pcs 8-32 Round Head

1

SK-632

370 pcs 6-32 Flat Head

3⁄ 4",

⁄ 2", 3⁄ 4", 1", 11⁄ 4", 11⁄ 2", 2"
1", 11⁄ 4", 11⁄ 2", 2", 3"

SK-832WP 135 pcs 8-32 Round Head

1

⁄ 2", 3⁄ 4", 1", 11⁄ 4", 11⁄ 2", 2"

14-WPI

10/card

Wall Plate Screws

Ivory

14-WPW

10/card

Wall Plate Screws

White

wall plate screws (white, ivory & almond)

SK-832WP

Flat-Head Screws

Wall-Plate Screws

“Big Red” Plastic Conical Anchor Kit
Perfect multi-purpose kit for professionals and end-users.
• Tapered end for easy installation.
• Flanged ribs prevent turning or twisting in hole.
• Carbide drill bit included with each kit.
Part #

Pkg Qty

Description

AP4-K100

1 kit

Plastic Anchor Kit

Kit Contains:
Qty Description
100

1⁄ 4"

100

#10 x 1" Slot/Phillips Combo Head Sheet-Metal Screws

1

162

1

x 1" Anchors

⁄ 4" Carbide Drill Bit

Round-Head Screws

Wall-Plate Screws

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

Quick Fix Spacers
Adjusts length of receptacle or switches for proper fit of face plates.
• Four-inch stack of spacers twists apart easily for desired thickness.

Part #

Pkg Qty

Description

GSP-04

4 strips

Spacers

Electrical Reference Books
Reference books that outline safe wiring
recommendations based on the
National Electric Code.
Part #
ERB-UG

ERB-WS

Pkg Qty Description
Ugly's Electrical References 1
Revised 2002 Edition.
A quick, on-the-job reference guide for
the most commonly required information
in an easy-to-read format.
1

Wiring Simplified 40th Edition
A comprehensive book that translates
the NEC rules into easy-to-understand
explanations on how to complete safe
wiring installs in homes.

163

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

NOTES

164

INDEX - Product Type & Name
NAME

PG

Alligator Clips..........................................21
Aluminum Mechanical Lugs....................13
Aluminum Splicer-Reducers ...................13
Aluminum Split Bolt Connectors.............12
Anchor Kit - Plastic Conical ..................162
Anti-Oxidant Compound (Ox-Gard™)......14
Battery Charging Clips, Clamps ..............21
Battery Tester (Analog) .........................136
Benders – Aluminum Rigid Conduit
Cyclone™ Electric Bender (B2000) ............34
Gardner® EMT Hand Benders ....................57
One-Shot Hydraulic Benders ...............40-46
Sidewinder® Electric Bender (B2555) .........35
Sidewinder® Mechanical Benders .........52-55
Sweep/Segmental Benders .................44, 46
Ultra Eegor™ Hydraulic Bender .................38
Benders – EMT Conduit
Big Ben™ Hand Benders ..........................56
Cyclone™ Electric Bender (B2000) ............34
Gardner® EMT Hand Benders ....................57
Iron Hand Benders...................................58
Sidewinder® Electric Bender (B2555) .........35
Sidewinder® Mechanical Benders .........52-55
Ultra Eegor™ Hydraulic Bender .................38
Benders – IMC Conduit
Cyclone™ Electric Bender (B2000) ............34
Sidewinder® Electric Bender (B2555) .........35
Sidewinder® Mechanical Benders .........52-55
Ultra Eegor™ Hydraulic Bender .................38
Benders – PVC Conduit
HotBlanket™ Benders ..............................61
HotBox™ Benders ..............................60-61
HotTube™ Bender....................................59
Benders – PVC-Coated Rigid Conduit
Cyclone™ Electric Bender (B2000) ............34
Sidewinder® Electric Bender (B2555) .........35
Sidewinder® Mechanical Benders ........52, 54-55
Benders – Rigid Steel Conduit
Rigid Bender Capacities Chart...................37
Big Ben™ Hand Benders ..........................56
Cyclone™ Electric Bender (B2000) ............34
Gardner® EMT Hand Benders ....................57
Iron Hand Benders...................................58
One-Shot Hydraulic Benders ...............40-46
Sidewinder® Electric Bender (B2555) .........35
Sidewinder® Mechanical Benders .........52-55
Sweep/Segmental Hydraulic Benders ...44, 46
Ultra Eegor™ Hydraulic Bender .................38
Bender Shoe Groups
Sidewinder® Electric Bender (B2555) - IMC ....36
Sidewinder® Electric Bender (B2555) - Rigid ...35
Sidewinder® Electric Bender (B2555) - EMT ....36
Sidewinder® Electric Bender
(B2555) - PVC-Coated ........................36
Blower Systems
JetLine® Super Blower™ (Electric) .............66
Super Blo-Vac™ System (Blower/Vacuum) ...67
Box Supports/Spacers ..................161, 163
Bullet Splices ..........................................19
Butt Splices & Kits ........................17,19,20
Cable Clamps - Plastic ..........................158
Cable Clamps - Rubber Insulated..........158

NAME

PG

Cable Pullers and Accessories
2,000 lb Mini-Brutus™ Powered Puller ......80
8,000 lb Brutus™ Powered Puller ..............81
Sub-Assembly Kits........................81-82
Brutus™ Powered Puller
Application Instructions .................83-85
Hook Sheaves.........................................86
Tension Meter .........................................86
Conduit Measuring Tape ..........................73
Cable Ties ......................................141-144
Category 3 & 5 Data Staples.................151
Circuit Alert™.................................111-113
Circuit Alert™ Tester............................. 111
Circuit Alert™ Knife ...............................111
Circuit Alert™ Wire Strippers ..................112
Circuit Alert™ Work Lights .....................112
Circuit Alert™ Pliers ..............................113
Circuit Alert™ Screwdrivers ....................113
CO2 Systems
Air Compressor Seal-Off ..........................71
CO2 Refill Connector ...............................71
Powr House™ Conduit Fishing Systems..............69
Powr-Pak I™ 5 lb. Portable System............70
Powr-Pak II™ 5 lb. Basic System...............70
Coaxial Cable Staples ............................151
Colored Cable Ties ................................144
Conduit Straps ......................................150
Continuity Tester
Heavy-Duty ..........................................129
Copper Mechanical Lugs.........................13
Copper Split Bolt Connectors..................12
Crimp Connectors ...................................12
Cutters ...........................................122-123
BX cutter..............................................122
Ratcheting ............................................123
PVC.....................................................123
Datacom/ VDV ...............................118-119
Cable strippers .....................................118
Punch-down .........................................119
Crimpers..............................................119
Disconnects ............................................18
Door Switch ............................................30
Duct Seal Compound ............................160
Fiber-Insulated Staples..........................152
Fish Sticks
12’ Fish Ease™ .......................................79
15’ Glo Fish™.........................................79
Fish Tapes and Accessories
Cable Snake™ Flat Wire Tape ...................76
Cable Snake™ Steel Fish Tapes ...........75-76
Economy Fish Tape..................................77
Fiberline™ Non-Conductive
Fiberglass Fish Tapes..........................77
Fish Tape Ball .........................................79
Fish Tape Leader .....................................78
Nylo-Flex™ Non-Conductive Nylon Fish Tapes .78
Replacement Tapes - Steel ........................77
Rewind™ Fish Tape Winder ......................75
Streamline™ Steel Fish Tapes ...................75
UpperHand™ Steel Fish Tapes ..................74
UpperHand™ Non-Conductive
Fiberglass Fish Tapes..........................74

NAME

PG

Fuse Puller ............................................124
GB Xtreme™ Lugs...................................14
GB Xtreme™ Terminals ...........................17
Grip Strip™ Hook-and-Loop Fasteners .144
Grounding Accessories ...........................14
Grounding Connectors (GreenGard™) ....10
Guide to Bending Booklet .......................62
Hand Benders
Big Ben™ Hand Benders ..........................56
Gardner® Thinwall Hand Benders...............57
Iron Hand Benders...................................58
Handles .................................................59
Hickey Bending Heads .............................59
Hanger Strap.........................................160
Heat-Shrink Tubing - Colored PVC........156
Heat-Shrink Tubing - Heavy-Wall ..........157
Heat-Shrink Tubing - Thin Wall Polyolefin ..156
Heavy Duty Cable Ties
(Natural & Ultraviolet Black) ..............142
Hi-Temp Black Connectors........................8
Hydraulic Bender Accessories.................50
Hydraulic Cylinder Specifications............51
Insulated Metal Staples.........................148
Knives ...........................................111, 124
Knockout Seals .....................................159
Low Voltage Wire Staples .............150, 152
Lubricants
Wire-Aide™ ...........................................86
Poly-Gel™..............................................87
Super-Slick™..........................................88
Masonry Staples ...........................150, 151
Material Handling
Hoist Lift (Hi-Hoist™)..............................94
Reel Rollers
30" Reel Roller ...................................91
Handy-Saver™ Reel Roller...................91
Reel Jacks - Telescoping ..........................91
Wire Caddies & Carts
Deluxe Spool Cart & Caddy Combo .......93
Hand Wire Caddy ................................92
Heavy-Duty Spool Cart &
Caddy Expander Combo...................93
Portable Wire Caddy ............................92
Portable Wire Dispenser .......................94
Replacement Parts ...............................94
Spool Caddy Cart ................................92
Wire Dispenser....................................93
Metal Staples ........................................148
Miniature Cable Ties
(Natural & Ultraviolet Black) ..............141
Mounting Bases and Ties
(Natural & Ultraviolet Black)......143, 144
MultiCable Staples ................................149
Multimeters - Analog ............................133
Analog Multimeters Comparison Chart.........133
Five Function, 12-Range .......................133
Six Function, 14-Range .........................133
Seven Function, 19-Range ....................133
Multimeters - Clamp-On .......................135
Clamp-On Comparison Chart .................135
AC Clamp Meter with Lockjaw ................135
Auto-Ranging Digital .............................135

165

INDEX - Product Type & Name
NAME

166

PG

Multimeters - Digital .............................134
Digital Multimeters Comparison Chart..........134
Three Function, 13-Range .....................134
Four Function, 14-Range .......................134
Seven Function, 7-Range Auto-Ranging ........134
Multi-Range Connectors (Hex-Lok™) .......9
Non-Contact Voltage Testers.................130
Non-Contact Voltage Testers
Comparison Chart ..............................130
Circuit Alert™ .......................................130
Live-Wire™ ..........................................130
Pigtail Connectors...................................11
Plastic Staples.......................................149
Pliers ............................................120 -121
Long Nose............................................120
Linemen’s.............................................121
Pull-Chain Switches ...........................28,29
Pull Line / Line Carriers
Foam Line Carriers..................................72
Heavy-Duty Bulk Nylon Line .....................73
Inflatables® Line Carriers..........................71
Missile Line Carriers ...............................71
Poly-Pull™ Line......................................73
Power Saver™ Line Packages ...................72
Tag Along™ Line Packages.......................72
Pumps
Economy Electric.....................................48
Manual Hydraulic ....................................49
Submerged Electric..................................48
Z-Class Electric.......................................47
Push-Button Switches........................27,28
Push-In Connectors (PushGard™)..........11
PVC Plug Sets.........................................61
Receptacle Testers/Analyzers
Receptacle Testers/Analyzers
Comparison Chart ..............................131
Lan Tracker™........................................132
Receptacle Tester & Circuit Analyzer ........131
GFCI & Circuit Analyzer .........................131
Reference Book - "Ugly's Electrical
References"........................................163
Reference Book - "Wiring Simplified" ....163
Releaseable Cable Ties
(Natural & Ultraviolet Black) ..............143
Ring Terminals ...................................17,18
Rocker Switches .....................................29
Roofing Staples.....................................151
Rope
Rope Selection Guide ..............................90
Poly-Pro™ General Purpose Rope .............89
Super Tuff-Pull™ Double Braided Rope ......88
Tuff-Pull™ Single Braided Rope ................89
Rotary Switches......................................30
Screwdrivers .........................................123
Screw Kits.............................................162
Seals .....................................................159
Service Entrance Staples.......................148
Service Entrance Straps........................150
Slug-Out™ Knockouts
35 Ton Hydraulic Punch.........................102
Draw Studs ...................................104-105

NAME

PG

Hydraulic Slug-Out™ Sets...................97-98
Individual Components ..................101, 105
Mechanical Slug-Out™ Sets ..............99-100
Notching Pliers .....................................102
Super Stainless Steel
Slug-Out™ Sets .......................103, 106
Spade Terminals......................................17
Spiral Wrap ...........................................157
Split Flex Tubing....................................157
Standard Cable Ties
(Natural & Ultraviolet Black) ..............141
Staple Gun ............................................147
Step Bits ...............................................107
Storage Cases (Tool Guard) ....................62
Straight-Sided Connectors (WireGard™) ..7
Stud Insulators .....................................159
Stud Punch ...........................................106
Table (Bend-Mate™ Bender
Table for Ultra Eegor™) ..................39
Tape - Electrical.....................................155
Tape - Friction .......................................155
Tape - Liquid Electrical..........................155
Tape - Silicone Self-Sealing ..................155
Tap Splices..............................................19
Tensioning Tools ...................................144
Tester Leads..........................................136
Tester Replacement Parts
(fuses, batteries)................................137
Toggle Switch Cover ...............................27
Toggle Switches .................................26,27
Underground UF Splice Kit......................20
Universal Connectors (Uni-Lok™)...........10
Vacuum / Blowers
Super Blo-Vac™ System ......................67
Voltage Testers ..............................127-129
Voltage Testers Comparison Chart ...........127
6-way Circuit ........................................128
Heavy-Duty 3-way ................................128
Low Voltage Twin Probe .........................127
Screwdriver, Voltage Probe &
Continuity Tester ................................128
Solenoid ..............................................129
Winged Connectors (WingGard™) ............8
Wire ........................................................21
Wire Markers - Pocket Pack..................161
Wire Strippers ...............................114-117
Multi-tool.............................................116
Cable Rippers .......................................117

Romex® is a registered trademark of the
Southwire Company, Carrollton, GA

INDEX - Part #
PART #

PG

601 ......................159
602 ......................159
603 ......................159
701 ......................159
702 ......................159
703 ......................159
704 ......................159
705 ......................159
706 ......................159
707 ......................159
708 ......................159
709 ......................159
710 ......................159
740 ........................94
800 ......................161
820 ........................59
821 ........................59
822 ........................59
920 ........................58
921 ........................58
922 ........................58
923 ........................58
932 ........................57
933 ........................57
950 ...................68,69
960 ........................56
961 ........................56
962 ........................56
1102 ......................70
1142 .................69,70
1206 ......................69
1208 .................68,69
1215 .................69,70
1216 .................69,70
1505 ......................70
1525 ......................67
12568 ....................67
126025 ..................66
10-001 .....................7
10-002 .....................7
10-003 .....................7
10-003HT ................8
10-004 .....................7
10-004HT ................8
10-006 .....................7
10-084 .....................8
10-086 .....................8
10-089 .....................8
10-095 ...................10
10-100 ...................19
10-103 ...................18
10-104 ...................18
10-106 ...................18
10-107 ...................18
10-108 ...................18
10-111 ...................17
10-112 ...................17
10-113 ...................17
10-114 ...................17
10-116 ...................17
10-121 ...................19
10-123 ...................19
10-126 ...................19
10-141F .................18
10-143F .................18
10-145F .................18
10-151F .................18

PART #

PG

10-153F .................18
10-153P.................18
10-155F .................18
10-1G1 ..................10
10-1H1.....................9
10-2G2 ..................10
10-2H2.....................9
10-310 ...................12
10-310C.................12
10-311 ...................12
10-311C.................12
10-410 ...................12
10-410C.................12
10-411 ...................12
10-411C.................12
10-PC2 ..................11
10-PC3 ..................11
10-PC4 ..................11
10-PC8 ..................11
1103N...............68,70
1105A ....................69
12-001 .....................7
12-001BU ................7
12-002 .....................7
12-002BU ................7
12-003BU ................7
12-004BU ................7
12-006BU ................7
12-084BU ................8
12-086BU ................8
12-1G1BU .............10
12-1H1BU................9
12-2G2BU .............10
12-2H2BU................9
13-003 .....................7
13-004 .....................7
13-006 .....................7
13-084 .....................8
13-086 .....................8
13-089 .....................8
13-095 ...................10
13-1G1 ..................10
13-1H1.....................9
13-2G2 ..................10
13-2H2.....................9
13-410 ...................12
14-075 ...................21
14-076 ...................21
14-077 ...................21
14-078 ...................21
14-095 ...................18
14-096 ...................18
14-097 ...................18
14-098 ...................18
14-099 ...................18
14-505 ...................21
14-510 ...................21
14-520 ...................21
14-530 ...................21
14-550 ...................21
14-610 ...................21
14-630 ...................21
14-GRC .................14
14-WPI ................162
14-WPW ..............162
16-001 .....................7
16-002 .....................7

PART #

PG

16-003 .....................7
16-003M ..................7
16-004 .....................7
16-006 .....................7
16-084 .....................8
16-084M ..................8
16-086 .....................8
16-086L ...................8
16-095 ...................10
16-1H1.....................9
16-1H1L...................9
16-8486 ...................8
16-8486M ................8
17-003 .....................7
17-004 .....................7
17-006 .....................7
17-084 .....................8
17-086 .....................8
17-1H1.....................9
19-001 .....................7
19-002 .....................7
19-003 .....................7
19-004 .....................7
19-006 .....................7
19-084 .....................8
19-086 .....................8
19-089 .....................8
19-095 ...................10
19-1G1 ..................10
19-1H1.....................9
19-2G2 ..................10
19-2H2.....................9
19-AWC ...................7
19-AWW ..................8
19-PC2 ..................11
19-PC3 ..................11
19-PC4 ..................11
19-PC8 ..................11
20-089 ...................11
20-090 ...................11
20-100 ...................19
20-102 ...................18
20-103 ...................18
20-104 ...................18
20-105 ...................18
20-106 ...................18
20-107 ...................18
20-108 ...................18
20-111 ...................17
20-112 ...................17
20-113 ...................17
20-114 ...................17
20-116 ...................17
20-121 ...................19
20-1210 .................19
20-123 ...................19
20-126 ...................19
20-141F .................18
20-141M ................18
20-143F .................18
20-143M ................18
20-145F .................18
20-145M ................18
20-151P.................18
20-153P.................18
20-161P.................19
20-163P.................19

PART #

PG

20-2218 .................19
20-410 ...................12
20-411 ...................12
21-100 ...................19
21-101 ...................18
21-102 ...................18
21-103 ...................18
21-104 ...................18
21-105 ...................18
21-1055 .................18
21-106 ...................18
21-107 ...................18
21-108 ...................18
21-109 ...................18
21-111 ...................17
21-112 ...................17
21-113 ...................17
21-114 ...................17
21-116 ...................17
21-121 ...................19
21-123 ...................19
21-126 ...................19
21-141F .................18
21-141M ................18
21-143F .................18
21-143M ................18
21-145F .................18
21-145M ................18
21-146F .................18
21-146M ................18
21-151F .................18
21-151M ................18
21-153F .................18
21-153M ................18
21-155F .................18
21-155M ................18
21-161F .................19
21-161M ................19
21-163F .................19
21-163M ................19
21-2218 .................19
25-001 .....................7
25-002 .....................7
25-003 .....................7
25-004 .....................7
25-006 .....................7
25-084 .....................8
25-086 .....................8
25-089 .....................8
25-095 ...................10
25-1G1 ..................10
25-1H1.....................9
25-2G2 ..................10
25-2H2.....................9
25-AWC ...................7
25-AWW ..................8
27-003 .....................8
27-004 .....................8
42-027 .................161
42-028 .................161
42-029 .................161
42-030 .................161
42-035 .................161
42-ALPHA ...........161
45-104 .................141
45-104UVB..........141
45-308 .................141

PART #

PG

45-308FB.............144
45-308FG ............144
45-308FY.............144
45-308G ..............144
45-308MT ............143
45-308MTUVB.....143
45-308UVB..........141
45-312 .................141
45-312UVB..........141
45-315 .................141
45-315UVB..........141
45-515 .................142
45-515UVB..........142
45-518 .................142
45-518UVB..........142
45-521 .................142
45-521UVB..........142
45-524 .................142
45-524UVB..........142
45-536 .................142
45-536UVB..........142
45-548 .................142
45-548UVB..........142
45-MB..................144
45-MBUVB ..........144
45-V11BK ............144
45-V15BK ............144
45-V8BK ..............144
46-104 .................141
46-104M ..............141
46-104UVB..........141
46-104UVBM.......141
46-206 .................141
46-206M ..............141
46-206UVB..........141
46-210 .................141
46-210UVB..........141
46-308 .................141
46-308G ..............144
46-308M ..............141
46-308UVB..........141
46-308UVBM.......141
46-310 .................141
46-310M ..............141
46-310UVB..........141
46-310UVBM.......141
46-311 .................141
46-315 .................141
46-315M ..............141
46-315UVB..........141
46-315UVBM.......141
46-330 .................142
46-330UVB..........142
46-408 .................142
46-408UVB..........142
46-412 .................142
46-412UVB..........142
46-415 .................142
46-415UVB..........142
46-418 .................142
46-418UVB..........142
46-421 .................142
46-421UVB..........142
46-424 .................142
46-424UVB..........142
46-436 .................142
46-436UVB..........142

167

INDEX - Part #
PART #

168

PG

46-448 .................142
46-448UVB..........142
46-507 .................141
47-108 .................143
47-108UVB..........143
47-115UVB..........143
47-121UVB..........143
47-127UVB..........143
48-308 .................143
48-308UVB..........143
48-315 .................143
48-315UVB..........143
79-002 ...................86
79-003 ...................86
79-006 ...................86
79-201 ...................87
79-202 ...................87
79-203 ...................87
79-301 ...................87
79-401 ...................88
79-402 ...................88
79-403 ...................88
920H......................58
921H......................58
922H......................58
930B ......................57
930H......................57
931B ......................57
931H......................57
932H......................57
960H......................56
961H......................56
962H......................56
A12 ........................50
A29 ........................50
A630 ......................50
AML-200................14
AML-201................14
AML-202................14
AML-203................14
AML-204................14
AML-205................14
AML-206................14
AML-207................14
AML-208................14
AMT-100 ................17
AMT-103 ................17
AMT-106 ................17
AMT-108 ................17
AMT-110 ................17
AMT-113 ................17
AMT-116 ................17
AMT-120 ................17
AMT-121 ................17
AMT-123 ................17
AMT-124 ................17
AMT-126 ................17
AMT-127 ................17
AMW-312 ..............21
AMW-314 ..............21
AMW-316 ..............21
AMW-318 ..............21
AMW-322 ..............21
AMW-324 ..............21
AMW-326 ..............21
AMW-328 ..............21
AMW-332 ..............21

PART #

PG

AMW-334 ..............21
AMW-336 ..............21
AMW-338 ..............21
AP4-K100 ............162
B1021028 ..............39
B2000 ....................34
B2555 ....................35
B2555EMT ............35
B2555IMC .............35
B2555PVC.............35
B2555RIG..............35
B26 ...................66,67
B3000 ....................66
B306S...............37,44
B306SPE22J .........44
B306SPH80...........44
B308S...............37,41
B308SPE22J .........41
B308SPH80...........41
B316S...............37,40
B316SPE22J .........40
B316SPH39...........40
B340S...............37,42
B340SP208J .........42
B340SPE22J .........42
B340SPH80...........42
B343S...............37,45
B343SP408J .........45
B343SP408K.........45
B343SP408S.........45
B343SPH84...........45
B350 .................42,45
B351S...............37,46
B351SP408J .........46
B351SP408S.........46
B351SPH84...........46
B359S...............37,43
B359SP208J .........43
B359SPH80...........43
B400DL .................38
B400DLP408S.......38
B400L ....................38
B400LP408S .........38
B60 ...................65,66
BB2030..................61
BB3040..................61
BB5150..................61
BE400....................39
BEMT-52................36
BF41......................52
BF42......................52
BF43......................52
BF47......................52
BF48......................52
BF49......................52
BF52......................52
BF90......................52
BFB2500 ...............38
BFB3000 ...............38
BFB3500 ...............38
BFB4000 ...............38
BH-100 ..................59
BH-125 ..................59
BH-75 ....................59
BHB-520D .............60
BHB-540A .............60
BHB-560................61

PART #

PG

BHB-560P .............61
BHE-50K ...............60
BHE-540................60
BHE-560................61
BHT-520A ..............59
BIMC-152 ..............36
BPVC-52 ...............36
BR12515 ..........52,53
BR20000 ...............52
BR57510 ..........52,53
BRIG-52 ................35
BS2500..................38
BS3000..................38
BS3500..................38
BS4000..................38
BT12515................52
BT2000.............52,55
BT57510................52
BTI12520...............52
BV12......................67
BV1281..................67
BV208DA..........65,67
BV23......................67
BV24.................66,67
BVS-240 ................61
BW11.....................53
BW12.....................53
BW15.....................53
BW20.....................54
BW201...................55
BW20S ..................54
BW221...................55
BW221S ................55
BW27.....................55
BW27S ..................55
BW30.....................54
BW30S ..................54
BWF888 ...............52,
....................53,54,55
BZ12011................40
BZ12021................40
BZ12031...........40,41
BZ12041...............40,
..........41,42,43,45,46
BZ12051...............40,
..........41,42,43,45,46
BZ12061...............40,
..........41,42,43,45,46
BZ12071................40
BZ12091...............40,
..........41,42,43,45,46
BZ12341...............42,
....................43,45,46
BZ12351...............42,
....................43,45,46
BZ12371................40
BZ12372...........41,44
BZ12374................42
BZ12375................40
BZ12376...............41,
....................42,44,45
BZ12377...............40,
.....41,42,43,44,45,46
BZ12379................44
BZ12380................44
BZ12381................44
BZ12382...........41,44
BZ12383...........41,44
BZ12384...........41,44

PART #

PG

BZ12385...........41,44
BZ12386...........43,46
BZ12388...........43,46
BZ12389...........43,46
BZ12390...........43,46
BZ12391...............42,
....................43,45,46
BZ12392...............42,
....................43,45,46
BZ13401...............41,
....................42,44,45
BZ28......................38
BZ34......................38
BZ39......................38
BZ44......................38
BZ74......................38
BZ78......................38
C604......................50
CAM-10 ...............111
CB21V ...................71
CD1012 .................51
CD3014 ............45,51
CD3028 ................38
CD3028KT.............38
CD308 ...................51
CD411 ...................50
CF859489..............39
CF860013..............39
CF861108..............39
CF862281..............39
CF863104..............39
CH1211 .....51,97,103
CH204028 .............39
CH819044 .............39
CH951044 .............39
CK211950 .............39
CK212950 .............39
CK579281 .............39
CM16.....................82
CM191044.............39
CM193350.............39
CM194900.............39
CM20...........38,62,81
CM260281.............52
CM4..................40,62
CM5.......................97
CM7......................41,
.....42,43,44,45,46,62
CP10 .....................82
CP1002 .................82
CP15 .....................82
CP2000 .................80
CP2000M ..............80
CP503 ..............81,82
CP504 ...................82
CP505 ..............81,82
CP600 ...................82
CP601 ..............81,82
CP622 ..............81,82
CP630 ...................82
CP631 ..............81,82
CP700 ...................82
CP701 ..............81,82
CP702 ..............81,82
CP703 ..............81,82
CP704 ...................82
CP705 ...................82
CP706 ..............81,82

PART #

PG

CP707 ..............81,82
CP708 ..............81,82
CP709 ..............81,82
CP80 ................81,82
CP800 ..............81,82
CP8000 .................81
CP8000D...............81
CP8001 .................81
CP801 ...................82
CP806 ...................82
CP807 ...................82
CR-100 ................117
CR-1000 ..............117
CRC-100 .............117
CS1010 ............40,51
CS106 ...................51
CS2510 .......41,44,51
CS2514 .......42,43,51
CS400 ..............38,39
CTT-45.................144
DC404 ...................38
DS-130 ................160
DS-530 ................160
E507 ......................62
EFT-21P ................76
EFT-50B ................77
ERB-UG ..............163
ERB-WS ..............163
F125 ......................71
F125B....................70
F250 ......................71
F250B....................70
F400 ......................71
F400B....................66
F600 ......................71
FC1..............69,70,72
FC10.................69,72
FC11.................69,72
FC1-10 ..................67
FC12.................69,72
FC2..............69,70,72
FC2..............69,70,72
FC3...................69,72
FC4...................69,72
FC5...................69,72
FC6...................69,72
FC7...................69,72
FC8...................69,72
FC9...................69,72
FLT-10..................112
FLT-20..................112
FLX-1007.............157
FLX-3810.............157
FLX-5007.............157
FLX-757GR .........157
FP159-3...............160
FP159-6...............160
FPE-20 ................124
FSP-AST .............157
FTB-10 ..................78
FTF-200.................77
FTL-5.....................78
FTN-100R..............74
FTS-100GR ...........75
FTS-125R..............74
FTS-200GR ...........75
FTS-250R..............74

INDEX - Part #
PART #

PG

FTS-50B ................76
FTS-65R................74
FTW-10 .................75
FTX-12L ................79
FTX-15GL..............79
GAK-1/0.................12
GAK-2....................12
GAK-2/0.................12
GAK-4/0.................12
GAT-3400............127,
.....................129,137
GBRX-301 ...........122
GBT-3502 .....136,137
GBT-500A.....136,137
GBX-300..............122
GBX-TK .................17
GC-1000..............122
GC-375................122
GC-500................122
GCC-120 .............150
GCC-220 .............150
GCC-310 .............150
GCC-410 .............150
GCC-510 .............150
GCC-610 .............150
GCM-221......135,137
GCM-500......135,137
GCP-3400 ...........121
GCT-3304 ...........127,
.....................129,137
GCV-3206...........127,
.....................128,137
GDT-311 .......134,137
GDT-3190 .....134,137
GDT-3200 .....134,137
GES-224..............114
GES-55................114
GESP-224 ...........114
GESP-55 .............114
GESP-70 .............114
GET-3100 .....127,137
GET-3202 .....127,137
GET-3206 ...........127,
.....................128,137
GET-3213 ...........127,
.....................128,137
GET-4220K...132,137
GFI-3501 .............131
GGC-1014C ..........14
GGC-1508 .............14
GGP-1261 .............14
GGP-1273 .............14
GGP-1282 .............14
GGP-1461 .............14
GGP-1502 .............14
GGS-1032HC ........14
GGS-1512R...........14
GHS-1510 ...........160
GKC-100A ...........123
GKK-1538............158
GKK-1538UVB ....158
GKK-1550............158
GKK-1575............158
GMC-1145...........119
GMC-2000L1.......119
GMT-312.......133,137
GMT-318.......133,137
GMT-319.......133,137

PART #

PG

GPC-200 .............123
GPS-3214............121
GPS-3219............121
GPS-3220............120
GPS-3228............120
GPS-3238............120
GPT-70 ................113
GPT-80 ................113
GPT-90 ................113
GRC-750 .............123
GRT-3500 ............131
GRX-3224 ...........117
GS-355 ................115
GS-359 ................118
GS-360 ................115
GS-361 ................115
GS-365 ................116
GS-366 ................117
GS-370 ................116
GS-385 ................120
GS-386 ................120
GS-387 ................121
GS-388 ................122
GS-394 ................116
GS-40 ..................115
GSBC-1/0 ..............12
GSBC-2 .................12
GSBC-2/0 ..............12
GSBC-3/0 ..............12
GSBC-4 .................12
GSBC-6 .................12
GSBC-8 .................12
GSE-105..............150
GSE-15310..........148
GSE-15410..........148
GSE-170..............150
GSE-205..............150
GSE-250..............150
GSE-304..............150
GSE-310..............148
GSE-330..............150
GSE-402..............150
GSE-410..............148
GSE-505..............150
GSE-710..............148
GSLU-125 .............13
GSLU-25 ...............13
GSLU-35 ...............13
GSLU-70 ...............13
GSP-04................163
GSPA-0..................13
GSPA-2..................13
GSPA-4/0...............13
GST-224M ...........112
GST-55M .............112
GST-70M .............112
GSW-10.................26
GSW-11.................26
GSW-110...............26
GSW-114...............27
GSW-117...............26
GSW-12 ................26
GSW-120...............26
GSW-121...............26
GSW-123...............26
GSW-124...............26
GSW-125...............26

PART #

PG

GSW-125BP..........26
GSW-13.................26
GSW-14.................26
GSW-15.................26
GSW-16.................26
GSW-17.................26
GSW-18.................26
GSW-19.................27
GSW-20.................27
GSW-21.................28
GSW-22.................27
GSW-23.................27
GSW-24.................28
GSW-24BP............28
GSW-25.................28
GSW-26.................30
GSW-31.................28
GSW-31BP............28
GSW-32.................28
GSW-32BP............28
GSW-33.................29
GSW-34.................29
GSW-35.................28
GSW-39.................29
GSW-41.................29
GSW-42.................29
GSW-45.................29
GSW-48.................29
GSW-49.................29
GSW-61.................30
GSW-62.................30
GSW-63B ..............30
GSW-68.................30
GSW-69.................30
GSW-69BP............30
GSW-SK................30
GTA-2 ....................13
GTA-2/0 .................13
GTB-406................19
GTB-408................19
GTB-410................19
GTB-667P ...........155
GTF-300 ..............155
GTF-600 ..............155
GTG-667P ...........155
GTN-667P ...........155
GTO-667P ...........155
GTP-307..............155
GTP-307D ...........155
GTP-307WD........155
GTP-607..............155
GTP-607P ...........155
GTPC-512 ...........155
GTPC-550 ...........155
GTPS-100 ...........118
GTPS-200 ...........118
GTR-667P ...........155
GTW-667P ..........155
GTY-667P............155
GVD-3504 ..........127,
.....................130,137
GVD-3505 ..........127,
.....................130,137
GVT-392 .............127,
.....................129,137
H8210....................50
H864..........50,97,103

PART #

PG

HC913 ..................40,
41,42,43,44,45,46,50
HC927 ...................38
HC927 ...................50
HC963 ...................50
HF100....................50
HF101....................50
HS-8512 ......81,82,86
HS-8518 ................86
HS-8524 ................86
HSB-28..................20
HST-093 ..............156
HST-100 ..............156
HST-101 ..............156
HST-102 ..............156
HST-107 ..............156
HST-125 ..............156
HST-1300 ..............20
HST-187 ..............156
HST-250 ..............156
HST-375 ..............156
HST-500 ..............156
HST-750 ..............156
HST-999 ..............156
HST-AST .............156
HST-WP.................20
HTP-1010 ............155
HWT-0722 ...........157
HWT-1138 ...........157
HWT-1550 ...........157
JLP10 ....................78
JLP5 ......................78
JO225LC ..........68,69
JO25.................68,70
JO25A ...................70
JO25CA............68,70
JV07 ......................67
JV08 ......................67
JV09 ......................67
JV12 ......................67
JV210 ....................67
K88001 ................100
K88004 ................100
K88007 ...........99,106
K88008 ................100
K88020 ......98,99,103
KC3540 ..........97,104
KD1000B ..............97,
...........98,99,100,101
KD1250B ..............97,
...........98,99,100,101
KD1500B ..............97,
...........98,99,100,101
KD2000B ..............97,
...........98,99,100,101
KD2500 ...97,100,101
KD3000 ...97,100,101
KD3500 ...97,100,101
KD4000 ...97,100,101
KD500B ................97,
...........98,99,100,101
KD750B ................97,
...........98,99,100,101
KDS1000 ......103,106
KDS1250 ......103,106
KDS1500 .............103
KDS2000 .............103
KDS500 ........103,106

PART #

PG

KDS750 ........103,106
KF-200.................124
KKT316 ...............101
KLP2......................98
KLP6......................98
KOF520 .................97
KOF540 .................97
KOH14A ................97
KOH2540.............100
KOH520A ..............97
KOH540A ..............97
KOM152 ..............100
KOM1732 ............101
KOM200 ..............101
KOM250 ..............101
KOM300 ..............101
KOM350 ..............101
KOM400 ..............101
KOM50125 ..........100
KOR14...................99
KOR152..........99,104
KOR50............99,104
KOR520.................99
KOR75125......99,104
KOS-1000B .........101
KOS-1250B .........101
KOS-1250DS.......101
KOS-1500B .........101
KOS-1500DS.......101
KOS-500B ...........101
KOS520 .................98
KOS5290 ...............98
KOS-750B ...........101
KOW520 ................99
KP1000B ..............97,
...........98,99,100,101
KP1250B ..............97,
...........98,99,100,101
KP1500B ..............97,
...........98,99,100,101
KP1732B .............101
KP2000B ..............97,
...........98,99,100,101
KP2500....97,100,101
KP3000....97,100,101
KP3500....97,100,101
KP4000....97,100,101
KP500B ................97,
...........98,99,100,101
KP750B ................97,
...........98,99,100,101
KPR7520 ..............98,
.....................103,104
KPR7540 ..............97,
.....................103,104
KPS1000 ......103,106
KPS1250 ......103,106
KPS1500 .............103
KPS2000 .............103
KPS50 ..................97,
................98,103,104
KPS500 ........103,106
KPS750 ........103,106
KS752B ................99,
.......100,101,105,106
KSA50 .....98,103,104
KSB50B................99,
.......100,101,105,106
KSN2530 ......101,105

169

INDEX - Part #
PART #

170

PG

KSN3540 ......101,105
KSS520 ...............103
KSS520A.............103
KW52.....................99
LP1701 .................73
LP1701B................70
LP1702B................70
LP1703 ..................70
LP1722 ..................73
LP2150 ...67,69,70,72
LP2206T......67,69,72
LP2207T......67,69,72
LP2208T...........69,72
LP3200 .............69,70
LP3200B................67
LP3300 .............69,72
LP3450 .............67,72
LP4200 ..................67
LP4300 .......69,70,72
LP4450 .............67,72
LTB-400 ...............155
LTR-400...............155
M2000 ...................71
M3000 ...................71
M4000 ...................71
M5000 ..............66,71
M6000 ..............66,71
MB-20..................144
MCS-100W..........149
MCS-20W............149
MPS-2080 ...........147
MPS-2100 ...........147
MPS-2125 ...........147
MS-150................148
MS-150J ..............148
MS-1550..............148
MS-1555..............148
MS-1575..............148
MS-1577..............148
MS-175................148
MS-175J ..............148
MS-450J ..............148
MS-500J ..............148
MS-550................148
MS-575................148
MS-950B .............148
MS-950BU...........148
MS-975B .............148
MSB-1540 ...........152
MSG-501 .............147
MSI-150...............148
MSI-1525.............148
MSI-200J .............148
MSI-50B ..............148
MSI-550...............148
MSI-950B ............148
MSW-1540 ..........152
NP-1 ....................102
NPR-1..................102
NYD-100................78
NYD-50..................78
OX-100 ..................14
OX-100B................14
OX-400 ..................14
OX-800 ..................14
P208J ....................47
P408S....................47

PART #

PG

PCC-1525............151
PCC-300..............151
PCS-100..............151
PCS-1525............151
PCS-1600............151
PCS-300B ...........151
PDB-110..............119
PDB-66................119
PDC-1525B .........152
PDS-1525B .........152
PDT-110 ..............119
PDT-110LC..........119
PE20D ...................48
PE22J....................48
PE24J....................48
PH20 .........49,97,103
PH39 .....................49
PH65 ................49,97
PH80 .....................49
PL102 ....................73
PL102B..................73
PL232B..................73
PL235 ....................73
PL235B..................73
PLT-1525 .............150
PLW-1525............150
PMB-1525 ...........150
PMC-1525W........150
PMW-100 ............150
PPC-1525............158
PPC-1525UVB ....158
PPC-1538............158
PPC-1538UVB ....158
PPC-1550............158
PPC-1550UVB ....158
PPC-1575............158
PPC-1575UVB ....158
PPC-1600............158
PPR-1550............158
PPR-1575............158
PPR-1600............158
PS-150 ................149
PS-150Z ..............149
PS-150ZJ ............149
PS-1550 ..............149
PS-1575 ..............149
PS-175 ................149
PS-175Z ..............149
PS-175ZJ ............149
PS-225J...............149
PS-250 ................149
PS-275 ................149
PS-50 ..................149
PS-550 ................149
PS-575 ...............149
PS-75 ..................149
PS-750B ..............149
PSB-100 ..............151
PSB-160 ..............150
PSB-1600 ............150
PSB-165 .............151
PSB-1650 ............151
PSG-100..............151
PSG-15................151
PSM-1550 ...........149
PSO-1525............149
PSO-1575............149

PART #

PG

PSR-25................151
PSW-100 .............151
PSW-160 .............150
PSW-1600 ...........150
PSW-165 ............151
PSW-1650 ...........151
PSW-200J ...........150
PT2000M...............80
PTM-25................151
PTP-25 ................151
PTP-250J ............151
PWS-1525 ...........152
RGP-2525 .............89
RGP-2560 .............89
RGP-3825 .............89
RGP-3860 .............89
RGP-50120 ...........89
RGP-5025 .............89
RGP-5060 .............89
RGP-7530 ........82,89
RGP-7560 ........82,89
RK-6 ....................124
RKT-21 ................111
RST-5030 ..............88
RST-5060 ..............88
RST-7530 ..............88
RST-7560 ..............88
RTL-103 ..............136
RTL-107 ..............136
RTL-108 ..............136
RTL-200 ..............136
RTP-3830 ..............89
RTP-5030 ..............89
RTP-7530 ..............89
RTS-100 ................77
RTS-200 ................77
RTS-50B................77
RTX-100 ................77
RTX-200 ................77
RV5 ..................70,71
S-8512..............81,82
SB-205 ................107
SB-207 ................107
SB-209 ................107
SB-210 ................107
SCE-3260............123
SDT-10 ................113
SDT-3 ..................113
SDT-6 ..................113
SE-92 ..................115
SE-98 ..................118
SI-25....................159
SK-632 ................162
SK-832 ................162
SK-832WP...........162
SP3500................102
SP-7 ....................106
SPD-10L..............119
SPD-438..............102
SPD-563..............102
SPD-688..............102
SPD-813..............102
SPK10 .................102
ST40......................73
TK-100...................19
TK-1210.................19
TK-1614.................19

PART #

PG

TK-175...................19
TK-1822.................19
TK-32.....................19
TK-40.....................19
TK-500...................19
TM5 .......................86
TRJ-56...................91
TRJ-96...................91
TT-10B.................123
WCM-10 ................93
WRR-100...............91
WRR1002513........91
WRR100259..........91
WRR-300...............91
WSP-100E.............92
WSP-115 ...............92
WSP-140 ...............92
WSP-144 ...............93
WSP144010 ..........94
WSP144050 ..........94
WSP144251 ..........94
WSP144253 ..........94
WSP144254 ..........94
WSP-150 ...............93
WSP1502517 ........94

Gardner Bender

USA
PO Box 3241
Milwaukee, WI 53201-3241
Customer Service 800.624.4320
Tech Support 414.247.5329
Fax 414.352.2377

CANADA
6615 Ordan Drive, Units 14-15
Mississauga, Ontario
L5T 1X2 Canada
905.564.5749
Fax 905.564.0305

www.gardnerbender.com

2009 / 2010 PRODUCT CATALOG

Catalog # AD-250-09

1.800.624.4320

©2009 Gardner Bender

2009/2010 PRODUCT CATALOG



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 for Macintosh
Create Date                     : 2008:10:27 17:33:11-05:00
Modify Date                     : 2008:10:28 09:46:39-05:00
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Metadata Date                   : 2008:10:28 09:46:39-05:00
Format                          : application/pdf
Creator                         : Wojdyla, Jennifer
Title                           : Out 63452 GB copy.qxd
Document ID                     : uuid:3ce14790-a477-11dd-a0c8-0017f20f1cc6
Instance ID                     : uuid:3a769130-a4ff-11dd-b51d-0017f20f1cc6
Has XFA                         : No
Page Count                      : 171
Author                          : Wojdyla, Jennifer

EXIF Metadata provided by EXIF.tools