Out 63452 GB Copy 112452 Catalog

2014-09-08

: Pdf 112452-Catalog 112452-Catalog 032076 Batch5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 171 [warning: Documents this large are best viewed by clicking the View PDF Link!]

2009 / 2010 PRODUCT CATALOG
Catalog # AD-250-09
©2009 Gardner Bender
USA
PO Box 3241
Milwaukee, WI 53201-3241
Customer Service 800.624.4320
Tech Support 414.247.5329
Fax 414.352.2377
CANADA
6615 Ordan Drive, Units 14-15
Mississauga, Ontario
L5T 1X2 Canada
905.564.5749
Fax 905.564.0305
www.gardnerbender.com
Gardner Bender 2009 / 2010 PRODUCT CATALOG 1.800.624.4320
Turn to Gardner Bender for durable,
dependable electrical tools and supplies
that deliver performance and
innovation on the job site.
5
WIRE CONNECTORS
15
TERMINALS
23
SWITCHES
31
CONDUIT BENDING
63
CONDUIT FISHING
95
HOLE MAKING
109
HAND TOOLS
125
TESTERS
139
CABLE TIES
145
STAPLES
153
WIRE MANAGEMENT
165
INDEX
TABLE OF CONTENTS - In Detail
WIRE CONNECTORS
Crimp Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .12
GB Xtreme™ Lugs . . . . . . . . . . . . . . . . . . . . . . . . .14
Twist-on Connectors . . . . . . . . . . . . . . . . . . . . . .7-10
Grounding Accessories . . . . . . . . . . . . . . . . . . . . . .14
Hi-Temp Black Connectors . . . . . . . . . . . . . . . . . . . . .8
Mechanical Lugs . . . . . . . . . . . . . . . . . . . . . . . .12-13
Nylon Pigtail Connectors . . . . . . . . . . . . . . . . . . . . .11
Push-In Connectors (PushGard™) . . . . . . . . . . . . . .11
Winged Connectors (WingGard™) . . . . . . . . . . . . . . .8
TERMINALS & WIRE
Clips & Clamps . . . . . . . . . . . . . . . . . . . . . . . . . .21
Butt Splices & Kits . . . . . . . . . . . . . . . . .17, 19, 20
Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19
Ring Terminals . . . . . . . . . . . . . . . . . . . . . . .17, 18
Spade Terminals . . . . . . . . . . . . . . . . . . . . . . . . .17
GB Xtreme™ Terminals . . . . . . . . . . . . . . . . . . . .17
Tap Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Terminal Blocks . . . . . . . . . . . . . . . . . . . . . . . . . .19
Underground UF Splice Kits . . . . . . . . . . . . . . . .20
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
SWITCHES
Door Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Pull Chain Switches . . . . . . . . . . . . . . . . . . . .28, 29
Push Button Switches . . . . . . . . . . . . . . . . . .27, 28
Rocker Switches . . . . . . . . . . . . . . . . . . . . . . . . .29
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . .30
Toggle Switches . . . . . . . . . . . . . . . . . . . . . .26, 27
Toggle Switch Cover . . . . . . . . . . . . . . . . . . . . . .27
CONDUIT BENDING
Cyclone™ Electric Bender (B2000) . . . . . . . . . . . . .34
Hand Benders (including Big Ben™) . . . . . . . . .56-58
Hydraulic Benders / Accessories . . . . . . . . . . . .38-51
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-49
PVC Benders & Plug Sets . . . . . . . . . . . . . . . . . .59-61
Sidewinder®Electric Bender (B2555) . . . . . . . . . . .35
Sidewinder®Mechanical Benders . . . . . . . . . . .52-55
Ultra Eegor™ Hydraulic Bender . . . . . . . . . . . . .38-39
Storage Cases (Tool-Guard™) . . . . . . . . . . . . . . . . .62
CONDUIT FISHING
Blower Systems . . . . . . . . . . . . . . . . . . . . . . . .66-67
CO2 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .69-70
Fish Sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Fish Tapes (including UpperHand™) . . . . . . . . . .74-78
Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86-88
Pull Line/Line Carriers . . . . . . . . . . . . . . . . . . . .71-73
Pullers & Accessories . . . . . . . . . . . . . . . . . . . . .80-86
Reel Rollers & Jacks . . . . . . . . . . . . . . . . . . . . . . . .91
Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-89
Wire Caddies & Carts . . . . . . . . . . . . . . . . . . . . .92-94
HOLE MAKING
35-Ton Hydraulic Punch . . . . . . . . . . . . . . . . . . . . .102
Drawstuds . . . . . . . . . . . . . . . . . . . . . . . . . . .104-105
Step Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Slug-Out™ Sets for Mild & Stainless Steel . . .97-107
Stud Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
HAND TOOLS
Circuit Alert™ . . . . . . . . . . . . . . . . . . . . . . . .111-113
Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122-123
Datacom/VDV . . . . . . . . . . . . . . . . . . . . . . . . .118-119
Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111, 124
Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120-121
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Wire Strippers . . . . . . . . . . . . . . . . . . . . . . . .114-117
TESTERS
Battery Tester (analog) . . . . . . . . . . . . . . . . . . . . . .136
Continuity Testers . . . . . . . . . . . . . . . . . . . . . . . . .129
Multimeters (analog, digital, clamp-on) . . . . . .133-135
Non-Contact Voltage Testers . . . . . . . . . . . . . . . . .130
Receptacle Testers/Analyzers . . . . . . . . . . . . . . . . .131
Tester Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Tone & Trace . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Voltage Testers . . . . . . . . . . . . . . . . . . . . . . . .127-129
CABLE TIES
Colored . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Grip Strip™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Miniature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Mounting Bases & Ties . . . . . . . . . . . . . . . . .143, 144
Releaseable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Tensioning Tools . . . . . . . . . . . . . . . . . . . . . . . . . .144
STAPLES
Category 3 & 5 Data . . . . . . . . . . . . . . . . . . . . . . .151
Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Conduit Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Fiber-Insulated . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Insulated Metal . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . .150, 152
Masonry . . . . . . . . . . . . . . . . . . . . . . . . . . . .150, 151
MultiCable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Roofing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Service Entrance . . . . . . . . . . . . . . . . . . . . . .148, 150
Staple Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
WIRE MANAGEMENT
Electrical Reference Books . . . . . . . . . . . . . . . . . .163
Anchor Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Box Supports/Spacers . . . . . . . . . . . . . . . . . .161, 163
Bushings/Insulators . . . . . . . . . . . . . . . . . . . . . . . .178
Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Duct Seal Compound . . . . . . . . . . . . . . . . . . . . . . .160
Hanger Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Heat-Shrink Tubing . . . . . . . . . . . . . . . . . . . .156, 157
Knockout Seals . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Screw Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Split Flex Tubing/Spiral Wrap . . . . . . . . . . . . . . . . .157
Stud Insulators . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Wire Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
Romex
®
is a registered trademark of the
Southwire Company, Carrollton, GA
4
WIRE CONNECTORS
7
9
11
12
12
Made of top-quality materials,
Gardner Bender wire connectors are
engineered to exceed the expectations
of professional electricians.
5
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
6
Aluminum Mechanical Lugs . . . . . . . . . . . . . . . . . .13
Aluminum Splicer-Reducers . . . . . . . . . . . . . . . . . .13
Aluminum Split Bolt Connectors . . . . . . . . . . . . . . .12
Anti-Oxidant Compound (Ox-Gard™) . . . . . . . . . . .14
Copper Mechanical Lugs . . . . . . . . . . . . . . . . . . . . .13
Copper Split Bolt Connectors . . . . . . . . . . . . . . . . .12
Crimp Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .12
GB Xtreme™ Lugs . . . . . . . . . . . . . . . . . . . . . . . . . .14
Grounding Connectors (GreenGard™) . . . . . . . . . .10
Grounding Accessories . . . . . . . . . . . . . . . . . . . . . .14
Hi-Temp Black Connectors . . . . . . . . . . . . . . . . . . . .8
Multi-Range Connectors (Hex-Lok™) . . . . . . . . . . . .9
Pigtail Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .11
Push-In Connectors (PushGard™) . . . . . . . . . . . . .11
Straight-Sided Connectors (WireGard™) . . . . . . . . .7
Universal Connectors (Uni-Lok™) . . . . . . . . . . . . . .10
Winged Connectors (WingGard™) . . . . . . . . . . . . . .8
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
7
2
Note: Connection rated at 600 V Max. for building wiring and rated at 1000 V Max. in lighting fixtures/luminaries and signs.
See carton for detailed wire combination ratings.
Color Part # Pkg Qty Wire Range Min Max
10-001 100/box
12-001 25,000/bulk keg
12-001BU 150,000/bulk barrel
16-001 150/jar
19-001 14/card
25-001 25/resealable bag
10-002 100/box
12-002 10,000/bulk keg
12-002BU 96,000/bulk barrel
16-002 150/jar
19-002 14/card
25-002 25/resealable bag
10-003 100/box
12-003BU 53,000/bulk barrel
13-003 500/bag
16-003 100/jar
16-003M 300/jar
17-003 50/bag
19-003 12/card
25-003 25/resealable bag
10-004 100/box
12-004BU 32,400/bulk barrel
13-004 500/bag
16-004 200/jar
17-004 50/bag
19-004 9/card
25-004 25/resealable bag
10-006 100/box
12-006BU 21,000/bulk barrel
13-006 250/bag
16-006 125/jar
17-006 50/bag
19-006 6/card
25-006 25/resealable bag
#22 - #16 AWG
(connections rated
at 300 V Max.)
1 #20
w/1 #22 2 #16
#22 - #16 AWG
(connections rated
at 300 V Max.)
3 #22 3 #16
#22 - #14 AWG
(connections rated
at 300 V Max. and
600 V Max.)
2
3 #20 4 #16
w/1 #20
#18 - #10 AWG
(connections rated
at 300 V Max. and
600 V Max.)
2
1 #14
w/1 #18 4 #14
#18 - #10 AWG
(connections rated
at 300 V Max. and
600 V Max.)
2
2 #14 2 #10
w/2 #12
GB-1
(71B)
GB-2
(72B)
GB-3
(73B)
GB-4
(74B)
GB-6
(76B)
®
A
B
C
D
E
Dimensions
ABCDE
GB-1 37⁄64"11⁄64"1⁄8"1⁄4"21⁄64"
GB-2 45⁄64"11⁄64"3⁄16"5⁄16"25 ⁄64"
GB-3 27⁄32"21⁄64"13⁄64"11⁄32"7⁄16"
GB-4 15⁄16"17⁄64"15 ⁄64"7⁄16"35⁄64"
GB-6 11⁄16"17⁄64"21⁄64"17⁄32"21⁄32"
WireGard™ Color-Coded Screw-On Wire Connectors
The industry standard twist-on connector with top quality,
performance and durability.
• Color-coded for easy size selection.
• Tight, square-wire spring makes quick, secure connections
for positive continuity.
• Tough, thermoplastic shell shields against environmental extremes.
• Resists chemical action from hydrocarbons, diluted acid
or alkaline solutions.
• Flame-retardant properties resist heat distortion up to 105 °C (221 °F).
• High-dielectric shell features deep skirt design to prevent exposure of bare wire.
• Copper-to-copper connections only.
Assortments
Part # Pkg Qty Description
19-AWC 9/card 2 gray, 2 orange, 3 yellow, 3 red
25-AWC 25/resealable bag 3 gray, 4 blue, 6 orange, 6 yellow, 6 red
Hi-Temp Black Connectors for Tough Environments
Connectors manufactured with high-temperature-rated plastic
to withstand extreme temperatures.
• Temperature-rated to 150 °C (302 °F).
• Available in two standard models.
• Copper-to-copper connections only.
®
Model (Size) Part # Pkg Qty Wire Range Min Max
10-003HT 100/box
27-003 10,000/bulk keg
10-004HT 100/box
27-004 10,000/bulk keg
1
Connections rated at 300 V Max. and 600 V Max.
Note: Connection rated at 600 V Max. for building wiring and rated at 1000 V Max. in lighting fixtures/luminaries and signs.
See carton for detailed wire combination ratings.
#22 - #14 AWG13 #20 4 #16 w/1 #20
GB-3 (73B)
#18 - #10 AWG11 #14 w/1 #18 4 #14
GB-4 (74B)
Note: Connection rated at 600 V Max. for building wiring and rated at 1000 V Max. in lighting fixtures/luminaries and signs.
See carton for detailed wire combination ratings.
Color Part # Pkg Qty Wire Range Min Max
10-084 100/box
12-084BU 42,000/bulk barrel
13-084 500/bag
16-084 100/jar
16-084M 225/jar
17-084 50/bag
19-084 6/card
25-084 25/resealable bag
10-086 100/box
12-086BU 22,500/bulk barrel
13-086 500/bag
16-086 125/jar
16-086L 325/jar
17-086 50/bag
19-086 6/card
25-086 25/resealable bag
10-089 50/box
13-089 100/bag
19-089 2/card
25-089 10/resealable bag
#22 - #10 AWG
(connections rated
at 300 V Max. and
600 V Max.)
2 #22 3 #12
#22 - #6 AWG
(connections rated
at 300 V Max. and
600 V Max.)
2 #20 4 #10
#14 - #6 AWG
(connections rated
at 300 V Max. and
600 V Max.)
1 #10
w/1 #12
1 #6 Str
w/2
#8 Str
#84™
#86™
#89™
WingGard™ Color-Coded Twist-On Wire Connectors
Unsurpassed quality and durability in a high-leverage, easy-on wing-type design.
• Wings are knurled for a sure grip and offset from centerline for greater
twisting leverage.
• Square-wire plated spring instantly adjusts to the shape and size of the splice.
• Flame-retardant properties resist heat distortion up to 105 °C (221 °F).
• High-dielectric shell features deep skirt design to prevent exposure of bare wire.
• Copper-to-copper connections only.
A
C
D
E
B
Dimensions
ABCDE
#84™ 11⁄32"5⁄16"7⁄32"1⁄4"23⁄32"
#86™ 11⁄4"5⁄16"9⁄32"7⁄16"29⁄32"
#89™ 11⁄2"7⁄16"3⁄8"3⁄4"11⁄4"
®
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
8
GB-4 GB-3
Assortments
Part # Pkg Qty Description
16-8486 100/jar 50 red, 50 yellow
16-8486M 160/jar 80 red, 80 yellow
19-AWW 5/card 2 yellow, 2 red, 1 large gray
25-AWW 25/resealable bag 8 yellow, 8 red, 7 tan, 2 blue
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
9
Color Part # Pkg Qty Wire Range Min Max
10-1H1 100/box
12-1H1BU 28,000/bulk barrel
13-1H1 500/bag
16-1H1 175/jar
16-1H1L 400/jar
17-1H1 50/bag
19-1H1 6/card
25-1H1 25/resealable bag
10-2H2 50/box
12-2H2BU 16,000/bulk barrel
13-2H2 250/bag
19-2H2 6/card
25-2H2 25/resealable bag
#22 - #8 AWG 3 #22 3 #10
#14 - #6 AWG 3 #14 1 #6
w/1 #8
H1
H2
Hex-Lok®Multi-Range Wire Connectors
Multi-range, hex-head copper-to-copper connector covers 95%
of everyday applications.
• Streamlined design for compact installations.
• Square-wire spring grabs and holds wires for secure connections.
• Long skirt covers stripped wires.
• Rated at 600 V Max. in building wire and at 1000 V Max. in lighting
fixtures/luminaries and signs.
• Copper-to-copper connections only.
D
C
B
A
E
F
Dimensions
ABCDEF
H1 47⁄64"9⁄16"5⁄16"21⁄61"15⁄32"5⁄16"
H2 1" 15⁄32"25⁄64"13 ⁄32"121⁄64"7⁄16"
®
Square wire
spring for secure
connection
Zinc plated spring
to resist corrosion
Thermoplastic shell
for strength and
chemical resistance
Swept wings for added
turning torque (WingGard™,
Hex-Lok®, GreenGard™)
Deep skirt for smooth wire entry
and coverage of stripped wires
All GB Twist-On Wire Connectors:
• Are designed to make wiring jobs fast,
easy, safe and reliable.
• Provide maximum application flexibility
by offering contractors myriad packaging
options, ergonomic designs and
wire ranges.
• Exceed UL standards for dielectric
strength, wire pullout force and static
heat resistance.
• Are manufactured of top-quality materials.
• Meet the requirements of nearly
all budgets.
• Are continually evaluated for
improvements and enhancements.
Gardner Bender Twist-On Wire Connectors
Engineered to exceed the expectations of professional electricians.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
10
GreenGard™ Grounding Wire Connectors
Specifically designed for making positive ground connections, GreenGard™ connectors
feature the same live-action as GB WingGard™ connectors with the added plating
protection for corrosion resistance in grounding applications.
• Easier to use — New design enables torque-up with improved grip.
• Contoured, offset wings enable firm ground connections.
• Flame retardant, thermoplastic shell resists punctures, cuts, abrasion and corrosion.
• Connectors have a hole in the tip for ground wire.
• Solid copper-to-copper connections only.
Dimensions
ABCDE
#95™ 11⁄4"5⁄16"9⁄32"7⁄16"29⁄32"
A
B
C
D
E
Color Part # Pkg Qty Wire Range Min Max
10-095 100/box
13-095 500/bag
16-095 125/jar
19-095 6/card
25-095 25/resealable bag
#95™
#14 - #10 AWG
(connections rated
at 600 V Max.)
2 #14 4 #12
Color Part # Pkg Qty Wire Range Min Max
10-1G1 100/box
12-1G1BU 40,000/bulk barrel
13-1G1 500/bag
19-1G1 6/card
25-1G1 25/resealable bag
10-2G2 100/box
12-2G2BU 24,000/bulk barrel
13-2G2 500/bag
19-2G2 6/card
25-2G2 25/resealable bag
#22 - #12 AWG 4 #22 3 #12
#22 - #10 AWG 3 #20 5 #12
G1
G2
Uni-Lok™ Universal Wire Connectors
Versatile and cost-effective, Uni-Lok™ connectors are designed to
accept a wide range of wire combinations.
• Swept mini-wings provide additional torque.
• Square-wire spring grabs and holds wires for secure connections.
• Long skirt covers stripped wires.
• Rated at 600 V Max. in building wire and at 1000 V Max. in lighting
fixtures/luminaries and signs.
• Copper-to-copper connections only.
E
D
C
B
A
®
Dimensions
ABCDE
G1 31⁄64"27⁄64"9⁄32"13⁄32"63⁄64"
G2 37⁄64"33⁄64"23⁄64"27⁄64"1
11⁄64"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
11
PushGard™ Push-in Wire Connectors
Easy and fast to use, just strip and push conductors into PushGard™
connectors to make reliable, secure connections.
• Simplified insertion and compact size helps in tight locations.
• Clear polycarbonate housings have color-coded side panels for
connection verification and identification.
• With corrosion-resistant stainless steel springs, PushGard™
connectors restrict wire pullout, yet corrections are possible with a
simple left-right twist and pull.
• Continuity test point for easy voltage checks.
• Available in 2-,3-,4 and 8-port configurations.
• Rated at 600 V Max. in building wire and at 1000 V Max.
in lighting fixtures/ luminaries.
• Copper-to-copper connections only.
PC2
PC3
#22 - #12
AWG Solid
(connections rated
at 600 V Max.)
#22 - #12
AWG Solid
(connections rated
at 600 V Max.)
#22 - #12
AWG Solid
(connections rated
at 600 V Max.)
#22 - #12
AWG Solid
(connections rated
at 600 V Max.)
Color Ports Part # Pkg Qty Wire Range
10-PC2 100/box
19-PC2 10/clam
10-PC3 100/box
19-PC3 10/clam
10-PC4 100/box
19-PC4 10/clam
10-PC8 50/box
19-PC8 10/clam
2
3
PC4 4
PC8 8
Nylon Pigtail Connectors
Closed-end crimp connector designed for use with solid or stranded wire.
• Two sizes available.
• Vibration resistant.
• Tin-plated seamless copper.
• Corrosion and chemical resistant.
Part # Pkg Qty Wire Range Min Max
20-089 10/clam
20-090 10/clam
#22 - #14 AWG 2 #22 1 #14 w/1 #18
#22 - #12 AWG 3 #18 1 #10 w/1 #20
.77"
.41"
.37"
.78"
.53"
.37"
.78"
.68"
.37"
.75"
.69"
.66"
PC2
PC3
PC4
PC8
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
12
Aluminum Split Bolt Connectors
Constructed of high-strength aluminum with oxide-displacing jaws to
prevent galvanic corrosion.
• Accept conductors from 10 AWG – 4/0 AWG.
• Use GB OX-GARD™ anti-oxidant treatment on Al-Al and Al-Cu to prevent
corrosion and permit cooler connections.
Part # Pkg Qty Wire Gauge
GSBC-8 2/clam #16 - #10 AWG Stranded, #16 - #8 AWG Solid
GSBC-6 2/clam #10 AWG Stranded, #10 - #8 AWG Solid
GSBC-4 2/clam #8 - #4 AWG Solid
GSBC-2 2/clam #6 - #2 AWG Solid
Part # Pkg Qty Wire Gauge
GSBC-1/0 1/clam #4 - #0 AWG Solid
GSBC-2/0 1/clam #2 - #00 AWG Solid
GSBC-3/0 1/clam #2 - #000 AWG Solid
Copper Split Bolt Connectors
All-copper alloy construction for high mechanical strength, maximum
conductivity and low resistance.
• Accept a wide range of solid and stranded conductors from
16 AWG – 3/0 AWG.
• Can be torqued with standard wrenches.
Dimensions
Model A B C D
310/410 3⁄8"19⁄64"1⁄4"13⁄64"
311/411 5⁄8"23⁄64"21⁄64"17⁄64"
311
310
411
410
D
B
C
A
®
Zinc-plated Steel
Part # Model Pkg Qty Wire Range Min Max
10-410 410 100/box
10-410C 410 100/clam
13-410 410 500/bag
20-410 410 12/clam
10-411 411 50/box
10-411C 411 50/clam
20-411 411 8/clam
#18 - #10 AWG 2 #16 2 #10
w/1 #12
#14 - #8 AWG 3 #12 4 #10
Copper
®
®
SEE PG FOR MORE INFO ON
121 GCP-3400
Crimp Tool
Crimp Connectors
Use GB crimp connectors for strong, vibration-resistant
permanent connections in branch circuit and fixture wiring.
• Two styles and sizes available.
• Copper or zinc-plated steel.
Part # Pkg Qty Wire Gauge
GAK-2 1/clam #8 - #2 AWG Solid
GAK-1/0 1/clam #8 - #0 AWG Solid
GAK-2/0 1/clam #10 AWG Stranded, #10 - #00 AWG Solid
GAK-4/0 1/clam #6 - #0000 AWG Solid
Part # Model Pkg Qty Wire Range Min Max
10-310 310 100/box #18 - #10 AWG 2 #16 2 #10 w/1 #12
10-310C 310 100/clam
10-311 311 50/box #14 - #8 AWG 3 #12 4 #10
10-311C 311 50/clam
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
13
1 Conductor
Part # Pkg Qty Wire Gauge
GTA-2 2/clam #14 - #10 AWG Stranded, #14 - #2 AWG Solid
GTA-2/0 2/clam #14 - #10 AWG Stranded, #14 - #00 AWG Solid
Part # Pkg Qty Wire Gauge
GSLU-25 2/clam #14 - #10 AWG Stranded
GSLU-35 2/clam #14 - #10 AWG Stranded, #14 - #6 AWG Solid
Part # Pkg Qty Wire Gauge
GSLU-70 2/clam #8 - #2 AWG Solid
GSLU-125 2/clam #6 - #0 AWG Solid
Aluminum Mechanical Lugs
• Feature high-strength, low-resistance aluminum construction.
• Accepts conductors from 14 AWG - 2/0 AWG.
• For 3⁄8" stud.
• Use GB OX-GARD™ anti-oxidant treatment on Al-Al and Al-Cu to
prevent corrosion and permit cooler connections.
Copper Mechanical Lugs
Provide maximum mechanical strength and minimum resistance.
• All-copper alloy construction features a compact design that is reusable.
• Accept a wide range of solid and stranded conductors from
14 AWG – 0 AWG.
• For 3⁄8" stud.
®
®
Part # Pkg Qty Wire Gauge
GSPA-2 2/clam #14 - #10 AWG Stranded, #14 - #2 AWG Solid
GSPA-0 1/clam #14 - #10 AWG Stranded, #14 - #0 AWG Solid
GSPA-4/0 1/clam #6 - #0000 AWG Solid
Aluminum Splicer-Reducers
Designed to splice similar-gauge conductors or reduce the gauge from
a larger wire diameter to a smaller one.
• Galvanic corrosion is limited by an internal wire stop, preventing direct
contact of dissimilar metals inside.
• Use GB OX-GARD™ anti-oxidant treatment on Al-Al and Al-Cu to prevent
corrosion and permit cooler connections.
SEE PG FOR MORE INFO ON
14 Ox-Gard™
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
14
Part # Pkg Qty Wire Gauge Stud Size
AML-200 2/clam #6 AWG 1⁄4"
AML-201 2/clam #6 AWG 5⁄16"
AML-202 2/clam #6 AWG 3⁄8"
AML-203 2/clam #4 AWG 5⁄16"
AML-204 2/clam #4 AWG 3⁄8"
GB Xtreme™ Lugs
Heavy-duty lugs made from pure copper for maximum current flow.
• Tinned for corrosion resistance.
• Seamless barrel for maximum strength.
• Closed ends seal out moisture.
Part # Pkg Qty Wire Gauge Stud Size
AML-205 2/clam #2 AWG 5⁄16"
AML-206 2/clam #2 AWG 3⁄8"
AML-207 2/clam #1/0 AWG 3⁄8"
AML-208 2/clam #2/0 AWG 3⁄8"
Grounding Accessories
Convenient grounding accessories
include products suitable for most
job requirements.
• Zinc-plated grounding clips provide
positive grounding to switch, outlet or
junction boxes for #10, 12, 14 AWG
copper grounding wire.
• Hex-head grounding screws secure ground wires to circuit box.
• Grounding clamps listed for direct burial and connection of
ground wire to ground rod.
Part # Pkg Qty Description Length Ends
GGP-1261 25/bag Grounding Pigtail; #12 AWG Solid 61⁄2" Captured screw/stripped
GGP-1273 25/bag Grounding Pigtail; #12 AWG Str 7" Stripped/bare fork terminal
GGP-1282 25/bag Grounding Pigtail; #12 AWG Str 8" Captured screw/bare fork terminal
GGP-1461 25/bag Grounding Pigtail; #14 AWG Solid 61⁄2" Captured screw/stripped
GGP-1502 2/card Grounding Pigtail; #12 AWG Solid 8" Captured screw/bare fork terminal
14-GRC 1/card Grounding Clamp for 1⁄2" - 1" pipe
GGC-1014C 50/clam Grounding Clip for #10, #12 or #14 AWG
GGC-1508 8/card Grounding Clip for Aluminum or Copper; Grounding wire; Zinc plated
GGS-1032HC 100/clam Hex-Head Ground Screw
GGS-1512R 12/card Green Round Washer Head Screw for Switch and Outlet Boxes
Ox-Gard™ Anti-Oxidant Compound
The perfect safeguard for aluminum-to-aluminum, aluminum-to-copper
wire connections and aluminum conduit joints.
• Guards against oxidation.
• Improves conductivity; penetrates aluminum oxide to maintain
inter-strand and inter-conductor current paths.
• Produces a cooler connection.
Part # Pkg Qty Description
OX-100 1/tube 1 oz Squeeze Tube
OX-100B 1/tube 1 oz Squeeze Tube (blister pack)
OX-400 1/tube 4 oz Squeeze Tube
OX-800 1/tube 8 oz Squeeze Tube
14-GRC
GGC-1014C
GGS-1032HC
GGP-1261
GGP-1273
SEE PG FOR MORE INFO ON
10 Grounding
Wire Connector
For Harsh
Environments
TERMINALS & WIRE
17
17
21
21
20
Dependable and easy-to-use,
Gardner Bender terminals and wiring
accessories offer the high quality
and application flexibility that
professionals demand.
15
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
16
Alligator Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Battery Charging Clips, Clamps . . . . . . . . . . . . . . .21
Bullet Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Butt Splices & Kits . . . . . . . . . . . . . . . . . . . .17,19,20
Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
GB Xtreme™ Terminals . . . . . . . . . . . . . . . . . . . . . .17
Ring Terminals . . . . . . . . . . . . . . . . . . . . . . . . . .17,18
Spade Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Tap Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Underground UF Splice Kit . . . . . . . . . . . . . . . . . . .20
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
17
Ring Terminals
Part # Pkg Qty Stud Size
AMT-100 3/clam 10
22-18 Gauge
Spade Terminals
Part # Pkg Qty Stud Size
AMT-110 3/clam 8
22-18 Gauge
Butt Splices
Part # Pkg Qty
AMT-120 3/clam
AMT-121 25/clam
22-18 Gauge
Part # Pkg Qty Stud Size
AMT-103 3/clam 8
16-14 Gauge
Part # Pkg Qty Stud Size
AMT-113 3/clam 8
16-14 Gauge
Part # Pkg Qty
AMT-123 3/clam
AMT-124 25/clam
16-14 Gauge
Part # Pkg Qty Stud Size
AMT-106 3/clam 8
AMT-108 3/clam 1/4"
12-10 Gauge
Part # Pkg Qty Stud Size
AMT-116 3/clam 8
12-10 Gauge
Part # Pkg Qty
AMT-126 3/clam
AMT-127 25/clam
12-10 Gauge
GB Xtreme™ Terminals
Spade Terminals - Vinyl-Insulated Barrel
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
Part # Pkg Qty Stud Size
10-111 100/clam 4 to 6
10-112 100/clam 8 to 10
20-111 20/clam 4 to 6
20-112 20/clam 8 to 10
21-111 10/clam 4 to 6
21-112 7/clam 8 to 10
22-18 Gauge
Part # Pkg Qty Stud Size
10-113 100/clam 4 to 6
10-114 100/clam 8 to 10
20-113 20/clam 4 to 6
20-114 20/clam 8 to 10
21-113 10/clam 4 to 6
21-114 10/clam 8 to 10
16-14 Gauge
Part # Pkg Qty Stud Size
10-116 50/clam 8 to 10
20-116 14/clam 8 to 10
21-116 8/clam 8 to 10
12-10 Gauge
General Purpose Terminals
Quick and reliable crimp-type wire connections.
• Color-coded by wire gauge size.
• Available in a variety of packaging options and stud sizes.
• Includes Spade and Ring Terminals, Disconnects, and Bullet, Butt & Tap Splices (p.17-19)
®
®
®
®
Constructed with Heat Shrink insulation – adhesive lined to waterproof and
environmentally seal electrical connections when crimped and heated.
• Insulates and protects connections from wire pullout, moisture intrusion and abrasion.
• Heat-activated adhesive melts and flows to create a seal.
• Resists salt water, oil, gasoline and other environmental contaminants.
For Harsh
Environments
Part # Pkg Qty Description
GBX-TK 24/card 22-10 AWG assorted
butt splices
Assortment
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
18
Part # Pkg Qty Stud Size
14-098 4/card 3⁄8"
14-099 4/card 1⁄2"
4 Gauge
Part # Pkg Qty Tab Type
10-141F 100/clam 0.250" Female
20-141F 21/clam 0.250" Female
20-141M 18/clam 0.250" Male
21-141F 10/clam 0.250" Female
21-141M 10/clam 0.250" Male
21-146F 10/clam 0.187" Female
21-146M 10/clam 0.187" Male
22-18 Gauge
Part # Pkg Qty Tab Type
10-143F 100/clam 0.250" Female
20-143F 20/clam 0.250" Female
20-143M 18/clam 0.250" Male
21-143F 10/clam 0.250" Female
21-143M 10/clam 0.250" Male
16-14 Gauge
Part # Pkg Qty Tab Type
10-145F 100/clam 0.250" Female
20-145F 16/clam 0.250" Female
20-145M 16/clam 0.250" Male
21-145F 8/clam 0.250" Female
21-145M 8/clam 0.250" Male
12-10 Gauge
Part # Pkg Qty Stud Size
20-102 22/clam 8 to 10
21-101 10/clam 4 to 6
21-102 10/clam 8 to 10
22-18 Gauge
Part # Pkg Qty Stud Size
10-103 100/clam 4 to 6
10-104 100/clam 8 to 10
20-103 22/clam 4 to 6
20-104 22/clam 8 to 10
20-105 17/clam 12 to 1⁄4"
21-103 10/clam 4 to 6
21-104 10/clam 8 to 10
21-105 7/clam 12 to 1⁄4"
21-1055 7/clam 5⁄16" to 3⁄8"
16-14 Gauge
Part # Pkg Qty Stud Size
10-106 50/clam 8 to 10
10-107 50/clam 12 to 1⁄4"
10-108 50/clam 1⁄4" to 3⁄8"
20-106 14/clam 8 to 10
20-107 14/clam 12 to 1⁄4"
20-108 13/clam 1⁄4" to 3⁄8"
21-106 8/clam 8 to 10
21-107 7/clam 12 to 1⁄4"
21-108 7/clam 5⁄16" to 3⁄8"
21-109 7/clam 7⁄16" to 1⁄2"
12-10 Gauge
Part # Pkg Qty Stud Size
14-095 4/card 1⁄4"
14-096 4/card 3⁄8"
14-097 4/card 1⁄2"
6 Gauge Part # Pkg Qty Tab Type
10-151F 100/clam 0.250" Female
20-151P 20/clam 0.250" F/M Pairs
21-151F 6/clam 0.250" Female
21-151M 6/clam 0.250" Male
22-18 Gauge
Part # Pkg Qty Tab Type
10-153F 100/clam 0.250" Female
10-153P 100/clam 0.250" F/M Pairs
20-153P 20/clam 0.250" F/M Pairs
21-153F 6/clam 0.250" Female
21-153M 6/clam 0.250" Male
16-14 Gauge
Part # Pkg Qty Tab Type
10-155F 50/clam 0.250" Female
21-155F 4/clam 0.250" Female
21-155M 4/clam 0.250" Male
12-10 Gauge
Ring Terminals - Vinyl-Insulated Barrel
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
Disconnects - Vinyl-Insulated Barrel
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
Disconnects - Fully-Insulated
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
19
Part # Pkg Qty Tab Type
20-161P 20/clam 0.250" F/M Pairs
21-161F 6/clam 0.156" Female
21-161M 6/clam 0.156" Male
22-18 Gauge
Part # Pkg Qty Tab Type
20-163P 20/clam 0.250" F/M Pairs
21-163F 6/clam 0.156" Female
21-163M 10/clam 0.156" Male
16-14 Gauge
Part # Pkg Qty
20-2218 5/clam12
21-2218 5/clam13
22-18 Gauge
Part # Pkg Qty
10-100 25/clam
20-100 5/clam12
21-100 5/clam13
16-14 Gauge
Part # Pkg Qty
20-1210 4/clam12
12-10 Gauge
Part # Pkg Qty
10-121 100/clam
20-121 22/clam
21-121 10/clam
22-18 Gauge Part # Pkg Qty
10-123 100/clam
20-123 21/clam
21-123 10/clam
16-14 Gauge Part # Pkg Qty
10-126 50/clam
20-126 15/clam
21-126 8/clam
12-10 Gauge
Bullet Splice - Fully Insulated
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
Butt Splices
• Rated at 600 Volt Max.
• Temperature rating: 167 °F (75 °C).
Tap Splices
• Secure connections without stripping wire.
• Rated at 300 Volt Max.
• Temperature rating: 221 °F (105 °C).
1210 clams/master 135 clams/master
Terminal Blocks
• Rated at 30 Amp/600 Volt max.
• Temperature rating: -40 °F (-40 °C) to 260 °F (130 °C).
• Wire range 22-10 AWG.
• Accepts #8 stud size.
Part # No. of Poles Pkg Qty
GTB-406 6 1/clam
GTB-408 8 1/clam
GTB-410 10 1/clam GTB-406 GTB-408
Terminal and Connector Kits
• Large selection of popular terminals and connectors.
• Assorted wire ranges, terminal and connector types.
Part # Pkg Qty Description
TK-1210 28/card Ring and spade terminals, butt splices, male and female disconnects, 12-10 AWG
TK-32 32/card WireGardTM and nylon pigtail connectors, 22-10 AWG
TK-40 40/card Ring and spade terminals, butt splices, female disconnects, 22-10 AWG
TK-1822 46/card Ring and spade terminals, butt splices, male and female disconnects, 22-18 AWG
TK-1614 48/card Ring and spade terminals, butt splices, male and female disconnects, 16-14 AWG
TK-100 80/reusable case WireGardTM connectors, ring and spade terminals, butt and tap splices, female disconnects, 22-10 AWG
TK-175 175/reusable case Ring and spade terminals, butt splices, male and female disconnects, 22-10 AWG
TK-500 500/card WireGardTM and nylon pigtail connectors, ring and spade terminals, butt and tap splices,
male and female disconnects, 22-10 AWG
GTB-410
®
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
20
Underground UF Splice Kit
Accommodates waterproof splicing of #14 - #8 AWG UF copper wire.
• Connector set screws engage each wire securely for a solid splice.
• Minimum conductor size 14/2 with ground.
• Maximum conductor size 8/3 with ground.
• Rated at 600 V max.
Part # Pkg Qty Description
HST-1300 1 kit Underground UF Splice Kit
®
Butt Splice Kit (#8 - #2 AWG)
Used for waterproof installation or repair of #8 - #2 AWG copper cable.
• Easy to use.
• Seal with heat gun or torch.
• Eliminates messy epoxies, tapes or mastics.
• Rated at 600 V max.
Part # Pkg Qty Description
HSB-28 1 kit Butt Splice Kit
®
Butt Splice Kit (#14 - #8 AWG)
Used for waterproof repair of well pipe cables and splices of stranded
cable #14 - #8 AWG.
• Connector set screws engage each wire for a secure splice.
• Assures safe and permanent connections.
• Rated at 600 V max.
®
Part # Pkg Qty Description
HST-WP 1 kit Butt Splice Connector Kit
Kit Contains:
Qty Description
4 Screw Splice Connectors
1 8" Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight
Adhesive Liner
SEE PG FOR MORE INFO ON
156 Heat Shrink
Products
Kit Contains:
Qty Description
1 Screw Splice Connectors
1 4" Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight
Adhesive Liner
Kit Contains:
Qty Description
1 Screw Splice Connectors
1 4" Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight
Adhesive Liner
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
21
Battery Charging Clips
Designed specifically for battery and testing equipment
applications, 5 - 50 Amp.
• Available in versatile sizes.
Part # Pkg Qty Description
14-505 4/card 5 Amp
14-510 4/card 10 Amp
14-520 2/card 20 Amp
Part # Pkg Qty Description
14-530 2/card 30 Amp
14-550 1/card 50 Amp
Insulated Battery Clamps
For battery, battery charger and testing equipment applications.
• Copper-clad clamp.
• Handle grips are insulated and color-coded for easy identification.
Part # Pkg Qty Description
14-610 2/card (1 red & 1 black) 10 Amp Copper Clad
14-630 2/card (1 red & 1 black) 50 Amp Copper Clad
Alligator Clips
Multi-purpose alligator clips for home, auto and marine applications.
• Available with insulating sleeve.
Part # Pkg Qty Description
14-075 4/card Non-Ins. #22 - #14 AWG 11⁄4"
14-076 4/card Non-Ins. #22 - #14 AWG 2"
14-077 2/card Barrel-Ins. #22 - #14 AWG 2"
14-078 2/card Fully-Ins. #22 - #14 AWG 2"
14-078
14-076
14-077
GB Xtreme™ Primary Wire
Tinned copper wire provides maximum protection against corrosion
and electrolysis.
• Ultra-flexible (Type 3) stranding.
• Resists salt water, battery acid, oil, gasoline and UV radiation.
• Insulation is heat and abrasion-resistant.
• Packaged in small spools.
• Rated to 600 V and 105 °C (221 °F) maximum.
Part # Pkg Qty Wire Gauge Length
AMW-312 1/clam 12 AWG 12 FT
AMW-314 1/clam 14 AWG 18 FT
AMW-316 1/clam 16 AWG 25 FT
AMW-318 1/clam 18 AWG 35 FT
AMW-322 1/clam 12 AWG 12 FT
AMW-324 1/clam 14 AWG 18 FT
AMW-326 1/clam 16 AWG 25 FT
AMW-328 1/clam 18 AWG 35 FT
Part # Pkg Qty Wire Gauge Length
AMW-332 1/clam 12 AWG 12 FT
AMW-334 1/clam 14 AWG 18 FT
AMW-336 1/clam 16 AWG 25 FT
AMW-338 1/clam 18 AWG 35 FT
For Harsh
Environments
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
22
NOTES
SWITCHES
26
28
28
29
30
With so many reliable products to choose
from, Gardner Bender switches perform
wherever the contractor needs one.
23
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
24
Door Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Pull-Chain Switches . . . . . . . . . . . . . . . . . . . . . .28,29
Push-Button Switches . . . . . . . . . . . . . . . . . . . .27,28
Rocker Switches . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Toggle Switches . . . . . . . . . . . . . . . . . . . . . . . . .26,27
Toggle Switch Cover . . . . . . . . . . . . . . . . . . . . . . . .27
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
25
Single Pole (SP): a switch device that opens,
closes or changes connections in a single
conductor of an electrical circuit
Double Pole (DP): a switch device that opens,
closes or changes connections in both
conductors of the same circuit.
Two Circuit (2 CIR): a switch device that
opens, closes or changes connections in a single
conductor of two independent circuits.
Single Throw (ST): a switch device that opens,
closes or completes a circuit at only one of the
extreme positions of its actuator.
Double Throw (DT): a switch device that
opens, closes or completes a circuit at both
extreme positions of its actuator.
Actuator: A lever, push-button, slide, trigger or
other means by which an external force is
applied to operate a switch mechanism.
Normally Open (NO): A momentary type
switch in which one or more circuits are open
when the switch actuator is at its normal
or rest position.
Normally Closed (NC): A momentary type
switch in which one or more circuits are closed
when the switch actuator is at its normal or rest
position.
Alternate Action (Double Action Push):
Push to make, then push to break, a circuit.
Power Ratings for Switches: the current
handling capability of a switch measured
in amperes, horsepower, lamp load or
combinations of these with applicable voltages.
Switch Terminology
UL/CSA Rated Switches
A UL/CSA-marked rating in amperes
indicates that the switch meets or exceeds
test house performance requirements of 6000
make-and-break cycles at the rated current,
preceded by 50 make-and-break cycles at 150%
switch current rating. 125% is used when switch
ratings exceed 10 amperes.
A UL/CSA horsepower-only rated device
meets minimum test requirements of 50
make-and-break cycles at the appropriate
locked rotor current, followed by 6000 cycles
at one-sixth the AC-locked rotor current and
10% of the DC-locked rotor current.
AC ampere ratings are resistive or inductive,
with the inductive rating tested at 75% to 80%
power factor.
AC horsepower ratings are inductive and tested
at 40% to 50% power factor.
“L” Rating denotes ability of an AC-only switch
to handle the initial high in-rush characteristics of
a tungsten filament lamp on AC voltage only.
“T” Rating denotes ability of an AC/DC switch
to handle the initial high in-rush characteristics
of a tungsten filament lamp on either AC or
DC voltage.
All DC ratings are 100% resistive only
(non-inductive).
Many AC-only rated switches can be used
in applications where less than 30 volts DC is
required, provided current does not exceed full
current rating of the switch.
Ampere-rated switches will
not
automatically
handle in-rush characteristics of five to six times
switch rating.
®
26
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
Toggle Switches
Versatile toggle switch family with multiple position configurations.
• Available in single or double pole.
• Perfect for industrial equipment or emergency lighting.
• 1⁄2" mounting hole required.
• Specifications: 10 A, 277 V AC / 20 A, 125 V AC
®
Part Number GSW-10 GSW-11* GSW-110 GSW-121
Poles SPST
Pkg Qty 1/card 1/card 1/card 1/card
Toggle Position ON-OFF ON-OFF ON-OFF ON-OFF
Terminal Type Screw Screw "O" Ring & Screw Spade
Rating 11⁄2HP 125-250 V AC 3⁄4HP 125-250 V AC 3⁄4HP 125-250 V AC 3⁄4HP 125-250 V AC
Part Number GSW-12 GSW-13 GSW-120 GSW-117
Poles SPDT
Pkg Qty 1/card 1/card 1/card 1/card
Toggle Position ON-ON ON-OFF-ON ON-OFF-ON (ON)-OFF-(ON)
Terminal Type Screw Screw Spade Screw
Rating 3⁄4HP 125-250 V AC 3⁄4HP 125-250 V AC 3⁄4HP 125-250 V AC 3⁄4HP 125-250 V AC
Part Number GSW-14 GSW-15 GSW-16 GSW-123
Poles DPST
Pkg Qty 1/card 1/card 1/card 1/card
Toggle Position ON-OFF ON-ON ON-OFF-ON (ON)-OFF-(ON)
Terminal Type Screw Screw Screw Screw
Rating 11⁄2HP 125-250 V AC 11⁄2HP 125-250 V AC 11⁄2HP 125-250 V AC 11⁄2HP 125-250 V AC
( ) Indicates momentary action
*GSW-11 has an ON-OFF faceplate.
All switches
must be
installed with a hex
nut (provided)
behind panel to
prevent damage
during installation.
tip:
( ) Indicates momentary action
Part Number GSW-17* GSW-18* GSW-124 GSW-125 GSW-125BP
Poles SPST
Pkg Qty 1/card 1/card 1/card 1/card 10/box
Toggle Position ON-OFF ON-OFF ON-OFF ON-OFF ON-OFF
Terminal Type Screw 6" wire leads screw 6" wire leads 6" wire leads
Actuator bat lever bat lever short ball short ball short ball
Rating 3 A/240 V AC, 8 A/125 V, 4 A/250 V, 3 A/240 V AC, 3 A/250 V, 3 A/250 V,
6 A/120 V AC 1/3 HP/125 V AC, 6 A/120 V AC 6 A/125 V 6 A/125 V
10 A/125 V AC
( ) Indicates momentary action *GSW-17 & 18 have an ON-OFF faceplate.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
27
Double Insulated, Plastic Toggle Switches
Double insulated for moisture protection in all environments.
• Internal “O” ring design for moisture and dust resistance.
• Perfect for marine/recreational equipment and weather-resistant applications.
• Specifications: 10 A, 277 V AC / 20 A, 125 V AC
®
Part Number GSW-19 GSW-114
Poles SPST SPDT
Pkg Qty 1/card 1/card
Toggle Position ON-OFF (ON)-OFF-(ON)
Terminal Type Screw Spade
Toggle Switch Covers
Tough EDPM rubber covers to protect switches from
moisture, dust and dirt.
• Built-in hex nut base screws onto all GB toggle switches.
Part # Pkg Qty Description
GSW-20 2/card Toggle Switch Cover
Momentary Contact Push-Button Switches
Basic push-button switch family utilized in applications requiring
intermittent continuity contacts.
• Normally OFF or normally ON models.
• Screw terminals.
• Mounts in standard 1⁄2" diameter hole.
• Mounting nut included.
Part Number GSW-22 GSW-23
Poles SPST
Pkg Qty 1/card 1/card
Toggle Position OFF (ON) ON (OFF)
Terminal Type screw screw
Plating Black Red
Rating 6 A/120 V AC, 3 A/120 V AC,
3 A/240 V AC 1.5 A/277 V AC
®
NOTE: GSW-22 is CSA approved only.
( ) Indicates momentary action
28
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
Maintained Contact Push-Button Switch -
Motor Rated
Maintained push-button switch rugged and versatile
enough to be utilized in many applications.
• Push on, push off switch with #18 AWG, 6" stripped wire leads.
• Mounting nut included.
Part # Pkg Qty Poles Toggle Position Terminal Type Rated
GSW-21 1/card SPST Push ON-Push OFF Wire Leads 10 A/125 V AC, 8 A/125 V,
4 A/250 V, 1/3 HP 125 V AC
®
Maintained Contact Push-Button Switches
Double insulated for moisture protection in all environments.
• Internal “O” ring design for moisture and dust resistance.
• Perfect for marine/recreational equipment and
weather-resistant applications.
• Specifications: 10 A, 277 V AC / 20 A, 125 V AC
®
Part Number GSW-24 GSW-24BP GSW-25
Poles SPST
Pkg Qty 1/card 10/box 1/card
Toggle Position ON-OFF ON-OFF ON-OFF
Terminal Type 6" wire leads 6" wire leads 6" wire leads
Plating Nickel Nickel Brass
Circuit 2 pos. 2 wire 2 pos. 2 wire 2 pos. 2 wire
Part Number GSW-31 GSW-31BP GSW-32 GSW-32BP GSW-35*
Poles SPST
Pkg Qty 1/card 10/box 1/card 10/box 1/card
Toggle Position ON-OFF ON-OFF ON-OFF ON-OFF ON-OFF
Terminal Type 6" wire leads 6" wire leads 6" wire leads 6" wire leads wire leads
Plating Nickel Nickel Brass Brass Nickel
Circuit 2 Pos. 2 Wire 2 Pos. 2 Wire 2 Pos. 2 Wire 2 Pos. 2 Wire 2 Pos. 2 Wire
Single Circuit Pull-Chain Switches
Basic ON-OFF switch family with pull-chain feature.
• ON-OFF switch with #18 AWG, 6" stripped wire leads.
• Mounts in 13⁄32" diameter hole (GSW-35 mounts in
1⁄2" diameter hole).
• Color coordinated nickel or brass plated.
• Specifications: 3 A/125 VL, 6 A/125 V AC, 3 A/250 V AC
®
*All angle
Horsepower Rating:
AC horsepower ratings
are inductive and tested at 40%
to 50% power rating.
tip:
“L” Rating Example:
3A/125VL means the
switch is rated to handle the
high in-rush from 3 amp
incandescent AC loads.
tip:
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
29
Variable Speed & Two Circuit Pull-Chain Switches
Pull chain switches for multifunction applications.
• Two and three speed switching.
• Push-in connections for #18 AWG wire.
• Mounts in 13⁄32" diameter hole.
• Specifications: 6 A/125 V AC, 3 A/250 V AC, 6 A/125 VL
®
Part Number GSW-33 GSW-34 GSW-39
Poles SPST
Pkg Qty 1/card 10/box 1/card
Toggle Position OFF-ON-ON OFF-ON-ON-ON OFF-ON(A)-ON(B)
-ON(A+B)
Terminal Type wire leads wire leads 6" wire leads
Plating Brass Brass Brass
Circuit 3 Pos. 3 Wire 4 Pos. 4 Wire 4 Pos. 3 Wire
Standard Rocker Switches
Heavy-duty rocker switches that fit .830" X
1.45" panel cutouts.
• Frame and rocker are black glass-filled nylon.
• Lighted or unlighted versions available.
• Specifications: 10 A/277 V AC,
20 A/125 V AC
• Switches with solder terminals come
in a phenolic case and do not have
a moisture and dust resistant seal.
Part Number GSW-45 GSW-49*
Poles SPST
Pkg Qty 1/card 1/card
Toggle Position ON-OFF ON-OFF
Terminal Type spade spade
Rating 3⁄4HP 125 - 250 V AC 3⁄4HP 125 - 250 V AC
®
*Red lighted
*Red lighted
Appliance Rocker Switches
Economy rocker switches that fit standard
.550" X 1.125" panel cutouts.
• Perfect for machinery or appliances.
• Lighted or unlighted versions available.
• Specifications: 16 A/125 V AC,
8 A/250 V AC
®
®
Mini Rocker Switch
Miniature rocker switch that fits .520" X .776" panel cutouts.
• Perfect for small machinery or appliances.
• Lighted or unlighted versions available.
• Specifications: 13 A/125 V AC, 10 A/250 V AC, 1⁄2HP 125 - 250 V AC.
Part # Pkg Qty Poles Toggle Position Terminal Type Rated
GSW-48* 1/card SPST ON-OFF spade 10 A/125 - 250 V AC,
1⁄2HP 250 V AC, 1⁄3HP 125 V AC
®
*Red lighted
Part Number GSW-41 GSW-42*
Poles SPST
Pkg Qty 1/card 1/card
Toggle Position ON-OFF ON-OFF
Terminal Type spade spade
30
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
Part Number GSW-61 GSW-63B GSW-69 GSW-69BP GSW-62 GSW-68
Poles SPST SPDT
Pkg Qty 1/card 1/card 1/card 10/box 1/card 1/card
Toggle Position ON-OFF ON-OFF ON-OFF ON-OFF OFF-ON(P)-ON(N) OFF-ON(P)-ON(N)
-ON(N+P) -ON(N+P)
Plating / Color Brass Black Button Black Plastic Black Plastic Brass Brass
Rating 6 A/125 V AC, 1.5 A/250 V AC 6 A/125 V AC, 6 A/125 V AC, 6 A/125 V AC, 6 A/125 V AC,
3 A/250 V AC 3 A/250 V AC 3 A/250 V AC 3 A/250 V AC 3 A/250 V AC
Mounting Hole .406" .513" .513" .513" .406" .513"
Rotary Switches
Single or three position switches in various fan and lighting applications.
• #18 AWG, 6" stripped wire leads.
• Brass terminals.
®
Part Number GSW-SK GSW-26
Poles SPST
Pkg Qty 1/card 1/card
Toggle Position Normally ON Normally ON
-Mom Contact -Mom Contact
Description AC/DC Door Switch Replacement
for GSW-SK
Door Switch
Push button switch with metal box, cover plate and mounting hardware
to operate lights when door is opened.
• Mounts in door jam.
• Fits in 1.25" X 2.75" X 2.0" deep approximate mounting hole.
• Specifications: 10 A/125 V AC, 10 A/250 V AC, 10 A/277 V AC, 1⁄2HP 125 - 277 V AC.
CONDUIT BENDING
34
38
52
56
60
Gardner Bender’s innovations have
delivered the ultimate in job-site
performance, durability and reliability
since 1959. Gardner Bender provides a
complete line of products to bend
1/4" – 4" EMT, Rigid, IMC and PVC
coated conduit.
31
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
32
Guide to Bending Booklet . . . . . . . . . . . . . . .62
Benders – Aluminum Rigid Conduit
Cyclone™ Electric Bender (B2000) . . . . . .34
Gardner®EMT Hand Benders . . . . . . . . . .57
One-Shot Hydraulic Benders . . . . . . . .40-46
Sidewinder®Electric Bender (B2555) . . . .35
Sidewinder®Mechanical Benders . . . .52-55
Sweep/Segmental Benders . . . . . . . . .44, 46
Ultra Eegor™ Hydraulic Bender . . . . . . . .38
Benders – EMT Conduit
Big Ben™ Hand Benders . . . . . . . . . . . . . .56
Cyclone™ Electric Bender (B2000) . . . . . .34
Gardner®EMT Hand Benders . . . . . . . . . .57
Iron Hand Benders . . . . . . . . . . . . . . . . . .58
Sidewinder®Electric Bender (B2555) . . . .35
Sidewinder®Mechanical Benders . . . .52-55
Ultra Eegor™ Hydraulic Bender . . . . . . . .38
Benders – IMC Conduit
Cyclone™ Electric Bender (B2000) . . . . . .34
Sidewinder®Electric Bender (B2555) . . . .35
Sidewinder®Mechanical Benders . . . .52-55
Ultra Eegor™ Hydraulic Bender . . . . . . . .38
Benders – PVC Conduit
HotBlanket™ Benders . . . . . . . . . . . . . . . .61
HotBox™ Benders . . . . . . . . . . . . . . . .60-61
HotTube™ Bender . . . . . . . . . . . . . . . . . . .59
Benders – PVC-Coated Rigid Conduit
Cyclone™ Electric Bender (B2000) . . . . . .34
Sidewinder®Electric Bender (B2555) . . . .35
Sidewinder®Mechanical Benders . .52, 54-55
Benders – Rigid Steel Conduit
Rigid Bender Capacities Chart . . . . . . . . .37
Big Ben™ Hand Benders . . . . . . . . . . . . . .56
Cyclone™ Electric Bender (B2000) . . . . . .34
Gardner®EMT Hand Benders . . . . . . . . . .57
Iron Hand Benders . . . . . . . . . . . . . . . . . .58
One-Shot Hydraulic Benders . . . . . . . .40-46
Sidewinder®Electric Bender (B2555) . . . .35
Sidewinder®Mechanical Benders . . . .52-55
Sweep/Segmental Hydraulic Benders . .44, 46
Ultra Eegor™ Hydraulic Bender . . . . . . . .38
Bender Shoe Groups
Sidewinder®Electric Bender
(B2555) - IMC . . . . . . . . . . . . . . . . . .36
Sidewinder®Electric Bender
(B2555) - Rigid . . . . . . . . . . . . . . . . .35
Sidewinder®Electric Bender
(B2555) - EMT . . . . . . . . . . . . . . . . . .36
Sidewinder®Electric Bender
(B2555) - PVC-Coated . . . . . . . . . . . . .36
Hand Benders
Big Ben™ Hand Benders . . . . . . . . . . . . . .56
Gardner®Thinwall Hand Benders . . . . . . .57
Iron Hand Benders . . . . . . . . . . . . . . . . . .58
Handles . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Hickey Bending Heads . . . . . . . . . . . . . . .59
Hydraulic Bender Accessories . . . . . . . . . . .50
Hydraulic Cylinder Specifications . . . . . . . . .51
PVC Plug Sets . . . . . . . . . . . . . . . . . . . . . . .61
Pumps
Economy Electric . . . . . . . . . . . . . . . . . . .48
Manual Hydraulic . . . . . . . . . . . . . . . . . . .49
Submerged Electric . . . . . . . . . . . . . . . . . .48
Z-Class Electric . . . . . . . . . . . . . . . . . . . . .47
Table (Bend-Mate™ Bender
Table for Ultra Eegor™) . . . . . . . . . . . .39
Storage Cases (Tool Guard) . . . . . . . . . . . . .62
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
33
Bending Selection Guide
Part # & Description
Combination Bending-Rigid, IMC, EMT Conduit Page # 1⁄2"3⁄4"1"1
1⁄4"1
1⁄2"2"2
1⁄2"3"3
1⁄2"4" 5"
B2000 Cyclone™ Bender 34 
B2555 Sidewinder®Bender & BRIG-52 35 
B2555 Sidewinder®Bender & BEMT-52 35 
B2555 Sidewinder®Bender & IMC-52 35 
B2555 Sidewinder®Bender & BPVC-152 35 
B400L & DL Ultra Eegor™ 38 
BW Series - Mechanical Sidewinder®Bender (EMT) 54-55  
BW Series - Mechanical Sidewinder®Bender (IMC) 53-55 
BW Series - Mechanical Sidewinder®Bender (Rigid) 53-55 
Rigid Conduit Bending Page # 1⁄2"3⁄4"1"1
1⁄4"1
1⁄2"2"2
1⁄2"3"3
1⁄2"4" 5"
B2000 Cyclone™ Bender 34 
B2555 Sidewinder®Bender & BRIG-52 35 
B400L & DL Ultra Eegor™ 38 
B316S One-Shot Bender 40 
B308S Combination One-Shot/Sweep Bender 41 
B340S One-Shot Bender 42 
B359S Combination One-Shot/Sweep Bender 43 
B306S Sweep/Segmental Bender 44 
B343S One-Shot Eject-O-Matic Bender 45 
B351S Combination Eject-O-Matic Bender 46 
Mechanical Sidewinder®Bender BW11,12,15, 20,30, 27 52-55 
Hand Benders - Gardner®Bender 57 931B 932 933
Hand Benders - Big Ben™ 56 961 962
Hand Benders - Malleable Iron 58 921 922 923
Hand Benders - Hickeys 59 820 821 822
EMT Conduit Bending Page # 1⁄2"3⁄4"1"1
1⁄4"1
1⁄2"2"2
1⁄2"3"3
1⁄2"4" 5"
B2000 Cyclone™ Bender 34 
B2555 Sidewinder®Bender & BEMT-52 35 
B400L & DL Ultra Eegor™ 38 
Mechanical Sidewinder®Bender BW30, 27, 201, 221 52-55 
Hand Benders - Gardner®Bender 57 930B 931B 932
Hand Benders - Big Ben™ 56 960 961 962
Hand Benders - Malleable Iron 58 920 921 922 923
IMC Conduit Bending Page # 1⁄2"3⁄4"1"1
1⁄4"1
1⁄2"2"2
1⁄2"3"3
1⁄2"4" 5"
B2000 Cyclone™ Bender 34 
B2555 Sidewinder®Bender & IMC-52 35-36 
B400L & DL Ultra Eegor™ 38 
Mechanical Sidewinder®Bender BW11,12,15, 20,30, 27 52-55 
PVC-Coated Rigid Conduit Bending Page # 1⁄2"3⁄4"1"1
1⁄4"1
1⁄2"2"2
1⁄2"3"3
1⁄2"4" 5"
B2000 Cyclone™ Bender 34 
B2555 Sidewinder®Bender & BPVC-152 35-36 
Mechanical Sidewinder®Bender BW30,27,201, 221 52-55 
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
34
Cyclone™
Electric-Powered Jobsite Bender
One shoe bends 1⁄2" - 2" conduit with no loose parts:
• Rigid • Rigid aluminum
• EMT • IMC
• PVC-coated rigid (1⁄2" to 11⁄2")
• Ability to make repeatable bends at the same degree.
• Horizontal and vertical positions allow the
unit to create accurate offset bends.
• Four-wheels increases mobility.
• Low-volt (95), high-volt (132) automatic shut-off
helps protect electrical components from
voltage fluctuations.
• Resetting circuit breaker eliminates down time
changing fuses.
• On/Off switch allows user to shut machine down
for extended periods of time.
• Hook attachment on pendant control frees
hands while working with conduit.
• Minimal training time.
• Weather-resistant cover included.
• 110/115 V AC, 15 AMP 1 HP DC Motor.
• Dimensions: 47" x 33" x 43".
• Weight 408 lbs.
Part # Description Weight
B2000 Cyclone®Electric-Powered Production Bender, 115 V / 15 A 408 lbs
Can be performed in the horizontal
or vertical position.
Easy dial settings-makes training
time virtually non-existent.
Conduit PVC-Coated
Size IMC Rigid EMT Rigid
1⁄2"4
3⁄8"5
3⁄8"4
1⁄4"4
3⁄8"
3⁄4"5
5⁄16"6
1⁄2"5
3⁄8"5
5⁄16"
1" 67⁄32"7
27⁄32"6
1⁄2"6
7⁄32"
11⁄4"7
23⁄32"8
3⁄8"7
27⁄32"7
23⁄32"
11⁄2"8
7⁄32" N/A 83⁄8"8
15⁄64"
2" 915⁄32" N/A 921⁄32"9
29⁄64"
Centerline Radius Chart:
B2000
New Features:
1. NEW STRONGER LEGS
Increased durability (10x life test)
2. LARGER TIRES/WHEELS
Increased mobility
3. STRONGER UPRIGHT HANDLE
Ease of use
4. FORK LIFT TUBES
Allows lifting and transport
capability–built into base
5. LIFT HOOK
Security (job-site) tethering
6. STORAGE AREA
Storage for tools, etc.
while in use
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
35
Electric Sidewinder®Bender
Bends 1⁄2" to 2" conduit:
• Rigid • Rigid aluminum (schedule 40 max.)
• IMC • EMT conduit
• PVC-coated rigid (40 mil)
• Up to 180 degree one-shot bends in 1⁄2" through 2" conduit.
• The handle detaches and pivots out of the way
for offset bending.
• Competitor shoes are interchangeable
(Greenlee, Current, etc.).
• 110/115 V AC
• 20 AMP
Conduit
Size EMT IMC Rigid
1⁄2"4
1⁄4"4
3⁄8"4
3⁄8"
3⁄4"5
3⁄8"4
1⁄2"4
1⁄2"
1" 63⁄4"5
3⁄4"5
3⁄4"
11⁄4"8
3⁄4"7
1⁄4"7
1⁄4"
11⁄2"8
9⁄32"8
9⁄32"8
1⁄4"
2" 99⁄16"9
9⁄16"9
1⁄2"
Centerline Radius Chart:
Electric Sidewinder™ Shoe Groups
Bender & Shoe
Groups can
be purchased as a kit
or individually.
note:
More Shoe Sets available on following page...
B2555
Part # Description Capacity/Range Weight
B2555 Electric Sidewinder®w/o Shoes — 270 lbs
B2555RIG Electric Sidewinder®w/ Rigid Shoe Group 1⁄2"-2" Rigid & 1⁄2"-11⁄4" IMC conduit 365 lbs
B2555EMT Electric Sidewinder®w/ EMT Shoe Group 1⁄2" - 2" EMT conduit 430 lbs
B2555IMC Electric Sidewinder®w/ IMC Shoe Group 11⁄2" - 2" IMC conduit 410 lbs
B2555PVC Electric Sidewinder®w/ PVC Shoe Group 1⁄2" - 2" 40 mil PVC-Coated conduit 365 lbs
Part # Conduit Description Weight I.D. #
RS-5125 1⁄2" & 11⁄4" Rigid and IMC Bending Shoe 43 lbs 1
RSR-5125 1⁄2" & 11⁄4" Rigid and IMC Support Roller 8 lbs 2
RS-152 11⁄2" & 2" Rigid Bending Shoe 36 lbs 3
RSR-152 11⁄2" & 2" Rigid Support Roller 6 lbs 4
BX-1 — Metal Storage Box 36 lbs —
129 lbs
Rigid Shoe Group (1⁄2" to 2")
BRIG-52
1234
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
36
Part # Conduit Description Weight I.D. #
PVS-5125 1⁄2" & 11⁄4" PVC-Coated Rigid Bending Shoe 43 lbs 1
PVR-5125 1⁄2" & 11⁄4" PVC-Coated Rigid Support Roller 8 lbs 2
PVS-152 11⁄2" & 2" PVC-Coated Rigid Bending Shoe 36 lbs 3
PVR-152 11⁄2" & 2" PVC-Coated Rigid Support Roller 6 lbs 4
BX-1 — Metal Storage Box 36 lbs —
Total Weight: 132 lbs
PVC-Coated Rigid Shoe Group (1⁄2" to 2" or 40 mil)
BPVC-52
Electric Sidewinder™ Shoe Groups (cont.)
Part # Conduit Description Weight I.D. #
ES-5125 1⁄2"& 1
1⁄4" EMT Bending Shoe 24 lbs 1
ESR-5125 1⁄2"& 1
1⁄4" EMT Support Unit 6 lbs 2
ES15 11⁄2" EMT Bending Shoe 23 lbs 3
ES-2 2" EMT Bending Shoe 31 lbs 4
ESR-152 11⁄2" & 2" EMT Support Roller Unit 40 lbs 5
BX-1 — Metal Storage Box 36 lbs —
Total Weight: 160 lbs
EMT Shoe Group (1⁄2" to 2")
BEMT-52
12345
1234
Part # Conduit Description Weight I.D. #
IS-15 11⁄2" IMC Bending Shoe 22 lbs 1
IS-2 2" IMC Bending Shoe 29 lbs 2
ISR-152 11⁄2" & 2" IMC Support Roller Unit 40 lbs 3
BX-1 — Metal Storage Box 36 lbs —
Total Weight: 127 lbs
IMC Shoe Group (11⁄2" to 2")
BIMC-152
123
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
37
B306S
Pipe Outside Wall Sched. B340S B351S
Size Dia. Thick. Pipe* B316S B308S B343S B359S
1⁄2" .840" .108" 40 WS WS
.147" 80 WS WS
.187" 160 WS WS WS WS
.294" DEH WS WS WS WS
3⁄4" 1.050" .113" 40 WS WS
.154" 80 WS WS
.218" 160 WS WS WS WS
.308" DEH WS WS WS WS
1" 1.315" .133" 40 WS WS
.179" 80 WS WS
.250" 160 WS WS WS WS
.358" DEH NR WS WS WS
11⁄4" 1.660" .140" 40 
.191" 80 
.250" 160 WS WS 
.342" DEH NR WS WS WS
11⁄2" 1.900" .145" 40 
.200" 80 
.281" 160 WS WS 
.400" DEH NR WS WS WS
2" 2.375" .154" 40 
.218" 80 NR 
.343" 160 NR WS 
21⁄2" 2.875" .203" 40 NR 
.276" 80 NR WS 
.375" 160 NR WS 
3" 3.500" .216" 40 NR 
.300" 80 NR WS 
31⁄2" 4.000" .226" 40 NR 
.318" 80 NR WS 
4" 4.500" .237" 40 NR 
.337" 80 NR NR 
5" 5.563" .258" 40 NR NR NR
.375" 80 NR NR NR
Rigid Bender Capacities Chart
One Shot / Sweep / Segmental
This chart is meant as a guide for bending capabilities only.
For those instances where doubt exists, a trial bend is recommended.
*Schedule Pipe:
40 = Standard
80 = Extra Duty
160 = Double Extra Duty
DEH = Double Extra Heavy
(slightly thicker than 160)
Other:
NR = Not Recommended
WS = Can be bent using wider
spacing for swivel shoes
Part #
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
38
Nominal
Size IMC EMT Rigid
21⁄2"13
1⁄2"13
1⁄2"13
1⁄2"
3" 157⁄8"15
7⁄8"15
7⁄8"
31⁄2"18
1⁄2"18
1⁄2"18
1⁄2"
4" 21" 21" 21"
Centerline Radius Chart:
Part # Conduit Description Weight I.D. #
BS2500 21⁄2" Bending Shoe 44 lbs 1
BS3000 3" Bending Shoe 50 lbs 2
BS3500 31⁄2" Bending Shoe 75 lbs 3
BS4000 4" Bending Shoe 90 lbs 4
BFB2500 21⁄2" Follow Bar 34 lbs 5
BFB3000 3" Follow Bar 35 lbs 6
BFB3500 31⁄2" Follow Bar 42 lbs 7
BFB4000 4" Follow Bar 40 lbs 8
BZ28 21⁄2" U-strap 5 lbs 9
Part # Conduit Description Weight I.D. #
BZ34 3" U-strap 5 lbs 10
BZ39* 31⁄2" U-strap 8 lbs 11
BZ44 4" U-strap 10 lbs 12
BZ78 - Bend Shoe Pin 4 lbs 16
CD3028 - 30-Ton, Double-Acting Hyd. Cyl. 95 lbs 17
HC927 - (2) 10' Hose w/High-Flow Coupler 4 lbs 18
BZ74 - Double Anchor Frame Pin 66 lbs 19
CM20 - Metal Case for Ultra Eegor™ 182 lbs -
*These parts are not included with B400DL and B400DLP408S.
Components Included with the Long-stroke Ultra Eegor™ Bender
*To convert older B400
or B400D to Long-stroke
Cylinder, use CD3028KT Kit,
which includes Long-stroke
Cylinder, CS400 Cylinder Support
and DC404 Decal.
tip:
BE400
Optional
18
5678
1
2
3
4
9
10
11
12 15
19
18
Ultra Eegor™ Hydraulic Bender
Bends 21⁄2" to 4" conduit:
• Rigid • Rigid aluminum (schedule 40 max)
• EMT • IMC
No additional attachment sets required to change per pipe or conduit type.
• 30 ton, 28" stroke cylinder can make a 90° bend with one pass.
• Double-acting cylinder for rapid retraction, regardless of hose lengths and system losses.
• Improved shoes and follow bars to reduce
conduit kinking during bending.
• Hydraulic power ensures the smoothest
bends without deformations to the conduit.
• Constant radii follow bars eliminate the
need for special calculations.
• Conduit is automatically stripped
free from the shoe during the return
cycle-which ensures no extra
labor or damaged conduit.
• Angle markings on frame ensure
easy and accurate bending.
SEE PG FOR MORE INFO ON
47 Electric Pumps
16
B400L
CS400
17
B400L with BE400 Table, CS400Cylinder
Support
& Z-Class Pump
Part # Description Pump Weight
B400L Long-stroke Ultra Eegor™ — 770 lbs
B400LP408S Long-stroke Ultra Eegor™ P408S Electric 870 lbs
B400DL Long-stroke Ultra Eegor™ w/o 31⁄2" shoe group — 770 lbs
B400DLP408S Long-stroke Ultra Eegor™ w/o 31⁄2" shoe group P408S Electric 795 lbs
CD3028KT* Eegor™ Conversion Kit, 28" Stroke Cylinder 105 lbs
CS400 Cylinder Support for BE400 Table 30 lbs
DC404 Bend Angle Decal 1 lb
Z-Class
Electric Pump
(P. 47)
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
39
Part # # Req'd Description I.D. #
CK211950 1 Plate assembly (top) 1
CK212950 1 Plate assembly (bottom) 2
CF859489 1 Retaining collar 3
CF860013 1 Pilot keyway 4
CH204028 4 Button head cap screw 5
CF862281 2 Roller (short) 6
CF861108 2 Roller insert (short) 7
CK579281 1 Roller 8
CF863104 1 Roller axle 9
CM191044 1 Retaining ring 10
CM194900 1 Roller assembly 11
CM193350 1 Roller cam 12
B1021028 1 Roller cam cap screw 13
CH819044 AR Wire, retaining 14
CH951044 1 Ring, retaining 15
Replacement Components for Eegor™ Roller Assembly BZ72:
1
14
5
3
12
13
11
10
4
55
2
9
8
15
BZ725 Top Plate Assembly BZ726 Bottom Plate Assembly
7
6
5
6
7
Bend-Mate™ Bender Table (Optional)
Rugged table for Eegor™ hydraulic conduit benders allows
one to work more comfortably and accurately.
• Hydraulic pivot jack adjusts table to horizontal or vertical
positions for easy access.
• Rugged one-piece steel frame with 1⁄4" steel plate tabletop.
• Wheels and lift-handles included for easy movement.
• Two ton jack force.
Part # Description Weight
BE400 Bend-Mate™ Table - 30"W* x 32"L x 56"H w/6" wheels 210 lbs
CS400 Cylinder Support for BE400 Table 30 lbs
*57" with table raised.
When ordering the
optional BE400 Table
for use with the Ultra Eegor™,
you must order the CS400
Cylinder Support.
tip:
Using BE400 table with an Eegor™
Hydraulic Bender will help reduce
labor costs, and physical strain.
tip:
BE400
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
40
B316S
13
1
2
3
4
12
8
8
14
7
11
10
10
9
1⁄2" - 2" One-shot Rigid Hydraulic Benders
Gardner Bender’s Rigid Benders are made with high-grade aluminum for
durability, and interchangeable shoes that allow quick and precise bends.
• Bends 1⁄2" to 2" rigid steel or rigid aluminum conduit.
• Portable hand pump or economical electric pump options.
• Durable metal job box included.
• Optic angle gauge for quick references of bend progression.
• Ability to be powered by manual or electric pumps.
Part # Conduit Description Weight I.D. #
BZ12011 1⁄2" Bending Shoe 1 lb 1
BZ12021 3⁄4" Bending Shoe 1 lb 2
BZ12031 1" Bending Shoe 2 lbs 3
BZ12041 11⁄4" Bending Shoe 4 lbs 4
BZ12051 11⁄2" Bending Shoe 5 lbs 5
BZ12061 2" Bending Shoe 7 lbs 6
CS1010 -
10-ton Single-Acting Cylinder*
13 lbs 7
Part # Conduit Description Weight I.D. #
BZ12071 - (2) Pivot Shoes 1 lb 8
BZ12091 - Angle Gauge .5 lb 9
BZ12375 - (2) Pivot Pins 1 lb 10
BZ12371 - Bender Frame 25 lbs 11
BZ12377 - Shoe Lock Pin .25 lb 12
HC913 - 6' Hose 3 lbs 13
CM4 - Metal Case 56 lbs 14
Components Included with B316S Models:
*Must order A12 Smooth Saddle, see p. 51
Nominal Rigid Bending
Size Radius Shoe
1⁄2"3
5⁄16" BZ12011
3⁄4"4
1⁄2" BZ12021
1" 513⁄16" BZ12031
Centerline Radius Chart:
Nominal Rigid Bending
Size Radius Shoe
11⁄4"7
1⁄4" BZ12041
11⁄2"8
1⁄4" BZ12051
2" 91⁄2" BZ12061
5
6
These benders are for use on
Rigid conduit only.
note:
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Part # Description Weight
B316S 1⁄2" - 2" One-shot Rigid Bender 104 lbs
B316SPH39 1⁄2" - 2" One-shot Rigid Bender w/ PH39 Hand Pump 114 lbs
B316SPE22J 1⁄2" - 2" One-shot Rigid Bender w/ PE22J Electric Pump 160 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
41
B308S
5
6
7
8
14
1
3
4
2
15
169
13
10
10
12
11
12
1" - 2" Combination One-shot / Sweep Rigid Hydraulic Benders
Bends 1" to 2" rigid steel or aluminum conduit in one shot. Includes 21⁄2"
to 4" sweep bend shoes.
• Capability of one-shoe bending for elbows.
• Ability to produce sweep bends where several bending
stages are necessary.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.
Part # Conduit Description Weight I.D. #
BZ12031 1" Bending Shoe 2 lbs 1
BZ12041 11⁄4" Bending Shoe 4 lbs 2
BZ12051 11⁄2" Bending Shoe 5 lbs 3
BZ12061 2" Bending Shoe 7 lbs 4
BZ12382 21⁄2" Sweep Bending Shoe 4 lbs 5
BZ12383 3" Sweep Bending Shoe 5 lbs 6
BZ12384 31⁄2" Sweep Bending Shoe 9 lbs 7
BZ12385 4" Sweep Bending Shoe 12 lbs 8
Part # Conduit Description Weight I.D. #
CS2510 -
25-ton Single-Acting Cylinder*
31 lbs 9
BZ13401 - (2) Pivot Shoes 4 lbs 10
BZ12091 - Angle Gauge .5 lb 11
BZ12376 - (2) Pivot Pins 4 lbs 12
BZ12372 - Bender Frame 54 lbs 13
BZ12377 - Shoe Lock Pin .25 lb 14
HC913 - 6' Hose 3 lbs 15
CM7 - Metal Case 98 lbs 16
Components Included with B308S Models:
*Must order A29 Smooth Saddle, see p. 51
Nominal Rigid Bending
Size Radius Shoe
1" 513⁄16" BZ12031
11⁄4"7
1⁄4" BZ12041
11⁄2"8
1⁄4" BZ12051
2" 91⁄2" BZ12061
Centerline Radius Chart:
Nominal Rigid Bending
Size Radius Shoe
21⁄2"10
1⁄2" BZ12341
3" 13" BZ12351
31⁄2"17
1⁄2" BZ12391
4" 20" BZ12392
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Part # Description Weight
B308S 1" - 2" One-shot / 21⁄2" - 4" Sweep Combination 225 lbs
B308SPH80
1" - 2" One-shot / 21
⁄2" - 4" Sweep Combo w/ PH80 Hand Pump
253 lbs
B308SPE22J
1" - 2" One-shot / 21
⁄2" - 4" Sweep Combo w/ PE22J Elec. Pump
340 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
42
B340S
14
15
2
1
3
4
5
6
7
13
9
9
12
8
11
11
10
Part # Conduit Description Weight I.D. #
BZ12041 11⁄4" Bending Shoe 4 lbs 1
BZ12051 11⁄2" Bending Shoe 5 lbs 2
BZ12061 2" Bending Shoe 7 lbs 3
BZ12341 21⁄2" Bending Shoe 15 lbs 4
BZ12351 3" Bending Shoe 15 lbs 5
BZ12391 31⁄2" Bending Shoe 40 lbs 6
BZ12392 4" Bending Shoe 41 lbs 7
CS2514 -
25-ton Single-Acting Cylinder*
31 lbs 8
Part # Conduit Description Weight I.D. #
BZ13401 - (2) Pivot Shoes 4 lbs 9
BZ12091 - Angle Gauge .5 lb 10
BZ12376 - (2) Pivot Pins 4 lbs 11
BZ12374 - Bender Frame 63 lbs 12
BZ12377 - Shoe Lock Pin .25 lb 13
HC913 - 6' Hose 3 lbs 14
CM7 - Metal Case 98 lbs 15
B350 - 5" Conversion Kit (optional) 63 lbs -
Components Included with B340S Models:
*Must order A29 Smooth Saddle, see p. 51
Nominal Rigid Bending
Size Radius Shoe
11⁄4"7
1⁄4" BZ12041
11⁄2"8
1⁄4" BZ12051
2" 91⁄2" BZ12061
21⁄2"10
1⁄2" BZ12341
Centerline Radius Chart:
Nominal Rigid Bending
Size Radius Shoe
3" 13" BZ12351
31⁄2"17
1⁄2" BZ12391
4" 20" BZ12392
11⁄4" - 4" One-shot Rigid Hydraulic Benders
Bends 11⁄4" to 4" rigid steel or rigid aluminum conduit.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Part # Description Weight
B340S 11⁄4" - 4" One-shot Rigid Bender 334 lbs
B340SPH80 11⁄4" - 4" One-shot Rigid Bender w/ PH80 Hand Pump 350 lbs
B340SPE22J 11⁄4" - 4" One-shot Rigid Bender w/ PE22J Electric Pump 390 lbs
B340SP208J 11⁄4" - 4" One-shot Rigid Bender w/ P208J Electric Pump 325 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
43
B359S
8
2
1
15
16
3
14
4
5
7
6
12
12
9
13 10
10
11
Part # Conduit Description Weight I.D. #
BZ12041 11⁄4" Bending Shoe 4 lbs 1
BZ12051 11⁄2" Bending Shoe 5 lbs 2
BZ12061 2" Bending Shoe 7 lbs 3
BZ12341 21⁄2" Bending Shoe 14 lbs 4
BZ12351 3" Bending Shoe 15 lbs 5
BZ12391 31⁄2" Bending Shoe 40 lbs 6
BZ12392 4" Bending Shoe 41 lbs 7
BZ12386 5" Sweep Bending Shoe 18 lbs 8
Part # Conduit Description Weight I.D. #
CS2514* -
25 ton Single Acting Cylinder
31 lbs 9
BZ12388 - (2) Pivot Shoes 4 lbs 10
BZ12091 - Angle Gauge .25 lb 11
BZ12390 - (2) Pivot Pins 4 lbs 12
BZ12389 - Bender Frame 85 lbs 13
BZ12377 - Shoe Lock Pin .25 lb 14
HC913 - 6' Hose 3 lbs 15
CM7 - Metal Case 98 lbs 16
Components Included with B359S Models:
*Must order A29 Smooth Saddle, see p. 50
Nominal Rigid Bending
Size Radius Shoe
11⁄4"7
1⁄4" BZ12041
11⁄2"8
1⁄4" BZ12051
2" 91⁄2" BZ12061
21⁄2"10
1⁄2" BZ12341
Centerline Radius Chart:
Nominal Rigid Bending
Size Radius Shoe
3" 13" BZ12351
31⁄2"17
1⁄2" BZ12391
4" 20" BZ12392
11⁄4" - 4" One-shot Sweep Combination Rigid Hydraulic Benders
Bends 11⁄4" to 4" rigid steel or rigid aluminum conduit.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Part # Description Weight
B359S 11⁄4" - 4" One-shot / 5" Sweep Combination 225 lbs
B359SPH80
11⁄4" - 4" One-shot / 5" Sweep Combo w/ PH80 Hand Pump
253 lbs
B359SP208J
11⁄4" - 4" One-shot / 5" Sweep Combo w/ P208J Elec. Pump
340 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
44
11⁄4" - 4" Sweep/Segmental Rigid Hydraulic Benders
Bends 11⁄4" to 4" rigid steel or rigid aluminum conduit sweep/segmental.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Ability to be powered by manual or electric pumps.
B306S
14
1
2
3
13
4
12
6
5
7
8
11
9
9
10
10
Part # Conduit Description Weight I.D. #
BZ12379 11⁄4" Sweep Bending Shoe 2 lbs 1
BZ12380 11⁄2" Sweep Bending Shoe 2 lbs 2
BZ12381 2" Sweep Bending Shoe 3 lbs 3
BZ12382 21⁄2" Sweep Bending Shoe 4 lbs 4
BZ12383 3" Sweep Bending Shoe 5 lbs 5
BZ12384 31⁄2" Sweep Bending Shoe 9 lbs 6
BZ12385 4" Sweep Bending Shoe 12 lbs 7
Part # Conduit Description Weight I.D. #
CS2510* - 25 ton Action Cylinder 31 lbs 8
BZ13401 - (2) Pivot Shoes 4 lbs 9
BZ12376 - (2) Pivot Pins 4 lbs 10
BZ12372 - Bender Frame 54 lbs 11
BZ12377 - Shoe Lock Pin .25 lb 12
HC913 - 6' Hose 3 lbs 13
CM7 - Metal Case 98 lbs 14
Components Included with B306S Models:
*Must order A29 Smooth Saddle, see p. 50
Nominal Smallest Bending
Size Radius Shoe
11⁄4"7
1⁄4" BZ12397
11⁄2"8
1⁄4" BZ12380
2" 91⁄2" BZ12381
21⁄2"10
1⁄2" BZ12382
Centerline Radius Chart:
Nominal Smallest Bending
Size Radius Shoe
3" 13" BZ12383
31⁄2"17
1⁄2" BZ12384
4" 20" BZ12385
For a quick reference
guide, order GB part
#E507 at no charge.
tip:
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Part # Description Weight
B306S 11⁄4" - 4" Sweep 216 lbs
B306SPH80 11⁄4" - 4" Sweep w/ PH80 Hand Pump 243 lbs
B306SPE22J 11⁄4" - 4" Sweep w/ PE22J Electric Pump 230 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
45
B343S
14
14
2
1
3
4
5
13
6
7
8
15
9
11
11
10
9
12
Part # Conduit Description Weight I.D. #
BZ12041 11⁄4" Bending Shoe 4 lbs 1
BZ12051 11⁄2" Bending Shoe 5 lbs 2
BZ12061 2" Bending Shoe 7 lbs 3
BZ12341 21⁄2" Bending Shoe 14 lbs 4
BZ12351 3" Bending Shoe 15 lbs 5
BZ12391 31⁄2" Bending Shoe 40 lbs 6
BZ12392 4" Bending Shoe 41 lbs 7
CD3014 -
30-ton Double-Acting Cylinder*
31 lbs 8
Part # Conduit Description Weight I.D. #
BZ13401 - (2) Pivot Shoes 4 lbs 9
BZ12091 - Angle Gauge .5 lb 10
BZ12376 - (2) Pivot Pins 4 lbs 11
BZ12374 - Bender Frame 78 lbs 12
BZ12377 - Shoe Lock Pin .25 lb 13
HC913 - (2) 6' Hoses 6 lbs 14
CM7 - Metal Case 98 lbs 15
B350 - 5" Conversion Kit (optional) 63 lbs -
Components Included with B343S Models:
*Must order A29 Smooth Saddle, see p. 50
Nominal Smallest Bending
Size Radius Shoe
11⁄4"7
1⁄4" BZ12041
11⁄2"8
1⁄4" BZ12051
2" 91⁄2" BZ12061
21⁄2"10
1⁄2" BZ12341
Centerline Radius Chart:
Nominal Smallest Bending
Size Radius Shoe
3" 13" BZ12351
31⁄2"17
1⁄2" BZ12391
4" 20" BZ12392
11⁄4" - 4" One-shot Eject-O-Matic™ Rigid Hydraulic Benders
Bends 11⁄4" to 4" rigid steel and rigid aluminum conduit. Eject-O-Matic™ feature retains
conduit with a T-pin while bending shoe is hydraulically retracted.
Once complete, the conduit automatically pops free.
• Optional 5" conversion kit available (B350) - segment only.
• Automatic ejection saves time and money.
• Ability to be powered by manual or electric pumps.
Bend Conduit
Hydraulically
Eject Conduit
Hydraulically
Double Acting (two hose)
cylinders provide
controlled and powerful bending
and return functions.
tip:
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Part # Description Weight
B343S 11⁄4" - 4" One-shot 330 lbs
B343SPH84 11⁄4" - 4" One-shot w/ PH84 Hand Pump 380 lbs
B343SP408K 11⁄4" - 4" One-shot w/ P408K Electric Pump 362 lbs
B343SP408J 11⁄4" - 4" One-shot w/ P408J Electric Pump 430 lbs
B343SP408S 11⁄4" - 4" One-shot w/ P408S Electric Pump 432 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
46
B351S
16
15
15
8
2
3
14
4
5
6
7
10
9
13
10
11
12
12
1
Part # Conduit Description Weight I.D. #
BZ12041 11⁄4" Bending Shoe 4 lbs 1
BZ12051 11⁄2" Bending Shoe 5 lbs 2
BZ12061 2" Bending Shoe 7 lbs 3
BZ12341 21⁄2" Bending Shoe 14 lbs 4
BZ12351 3" Bending Shoe 15 lbs 5
BZ12391 31⁄2" Bending Shoe 40 lbs 6
BZ12392 4" Bending Shoe 41 lbs 7
BZ12386 5" Sweep Bending Shoe 18 lbs 8
Part # Conduit Description Weight I.D. #
CD3014* -
30 ton Double Acting Cylinder
31 lbs 9
BZ12388 - (2) Pivot Shoes 10 lbs 10
BZ12091 - Angle Gauge .5 lb 11
BZ12390 - (2) Pivot Pins 4 lbs 12
BZ12389 - Bender Frame 85 lbs 13
BZ12377 - Shoe Lock Pin .25 lb 14
HC913 - (2) 6' Hoses 13 lbs 15
CM7 - Metal Case 98 lbs 16
Components Included with B351S Models:
*Must order A29 Smooth Saddle, see p. 50
Nominal Rigid Bending
Size Radius Shoe
11⁄4"7
1⁄4" BZ12041
11⁄2"8
1⁄4" BZ12051
2" 91⁄2" BZ12061
21⁄2"10
1⁄2" BZ12341
Centerline Radius Chart:
Nominal Rigid Bending
Size Radius Shoe
3" 13" BZ12351
31⁄2"17
1⁄2" BZ12391
4" 20" BZ12392
11⁄4" One-shot Eject-O-Matic™ Rigid Hydraulic Benders - 5" Sweep
Bends 11⁄4" to 4" rigid steel and rigid aluminum conduit in one shot and 5" sweep.
• Choice of hand or electric pumps.
• Durable metal job box included.
• Eject conduit hydraulically by moving one pivot pin.
• Ability to be powered by manual or electric pumps.
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49 Manual Pumps
SEE PG FOR MORE INFO ON
51 Cylinders
Bend Conduit
Hydraulically
Eject Conduit
Hydraulically
Part # Description Weight
B351S 11⁄4" - 4" One-shot / 5" Sweep Combination 377 lbs
B351SPH84 11⁄4" - 4" One-shot / 5" Sweep Combo w/ PH84 Hand Pump 410 lbs
B351SP408J
11⁄4" - 4" One-shot / 5" Sweep Combo w/ P408J Elec. Pump
458 lbs
B351SP408S
11⁄4" - 4" One-shot / 5" Sweep Combo w/ P408S Elec. Pump
460 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
47
P208J P408S
Motor Size 1.7hp 1.7hp
Type Z-Class Z-Class
Reservoir Capacity 2 gallon 2 gallon
Pump Type single-acting double-acting
Pressure Rating
1st stage (psi) 100 100
2nd stage (psi) 10,000 10,000
Output Flow Rate
1st stage (in3/min) 700 700
2nd stage (in3/min) 60 60
Valve Type 3 way/2 pos. 4 way/3 pos.
Current Draw (max) (Amps) 20 20
Motor Voltage (VAC) 115 115
Sound (dba) 85-90 85-90
Weight (lbs) 70 85
Relief Valve Adj. Range (psi) 2,000-10,000 2,000-10,000
Double-Acting Pump
P408S
1.7 HP Pump
Single-Acting Pump
P208J
1.7 HP Pump
Back-lit LCD
Provides essential information:
• Hour & cycle counts
• Low voltage warning
• Self-test, diagnostic and read-out capabilities
• Pressure read-out and adjustable trigger
pressure settings
• Information displayed in 6 languages
▲
▲
▲
Z-Class Electric Pumps
Introducing
Gardner Bender Z-Class hydraulic pumps—pumps that run cooler, use less electricity and are
easier to service than conventional pumps. Gardner Bender has used the latest metallurgical, bearing and
seal technologies to produce a pump whose features and benefits far surpass the electric pumps that are
available today. By reducing the number of moving parts, improving flow dynamics and decreasing friction,
Z-Class pumps will stay on the job longer, require less energy to operate and when needed, have lower
service costs.
• Two-speed high-efficiency pumps.
• Self-priming, high-flow 1st stage pump.
• Large, heavy-duty bearings and balanced rotating components.
• Replaceable piston check-valves.
• Powerful universal motor and excellent low-voltage operating.
• Brush design lasts 4-times longer.
• Ergonomic high strength composite.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
48
PE20D PE22J PE24J
Motor Size 1⁄2hp 1⁄2hp 1⁄2hp
Type Economy Economy Submerged
Reservoir Capacity 1 gallon 1 gallon 1 gallon
Pump Type Single-Acting Single-Acting Double-Acting
Pressure Rating
1st stage (psi) 200 200 200
2nd stage (psi) 10,000 10,000 10,000
Output Flow Rate
1st stage (in3/min) 200 200 200
2nd stage (in3/min) 20 20 20
Valve Type Dump 3-way, 2 pos. 4-way, 3 pos.
Current Draw (Amps) 9.5 9.5 9.5
Motor Voltage (VAC) 115 115 115
Sound (dba) 85 85 85
Weight 29 lbs 27 lbs 32 lbs
Single-Acting Pump
PE22J
1⁄2HP Pump
3/8" 18NPTF
16.00
7.30
2.00
4.98 8.42
8.97
9.42
1.50 2.21
11.20
7.06
1.00
3.89
3.62
7.18
7.73
4.00
Oil Flow (in3/min) 왘
Pressure (psi) 왘
Submerged Flow Chart (@ 60 Hz)
PE24J Submerged Electric Pumps
Oil Flow (in3/min) 왘
Pressure (psi) 왘
Economy Series Flow Chart
PE20D or PE22J Economy Electric Pumps
Double-Acting Pump
PE24J
1⁄2HP Pump
Economy Electric Pumps
PE20D & PE22J
• Lightweight - 22 - 41 lbs.
• 115 V AC 50/60 cycle universal motor works well with
long extension cords or generator-driven power.
• Long 10' remote control for operator safety.
• Great for medium-sized cylinders.
Submerged Electric Pumps
PE24J
• Powerful 1⁄2hp induction motor is submerged in the oil reservoir to run
cooler, protect motor, simplify pump interface, save space, reduce noise.
• Large 1.7 gallon reservoir allows for a wide operation of cylinders.
• Full-length slide tube for visual monitoring of oil level.
Single-Acting Pump
PE20D
1⁄2HP Pump
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
49
PH20 PH39 PH80 PF65
Pump Type Single-Speed Single-Speed Two-Speed Single-Speed
Usable Oil Capacity (in3) 20 40 134 22
Pressure Rating
1st stage (psi) N/A N/A 350 N/A
2nd stage (psi) 10,000 10,000 10,000 6,500
Oil Displ. per Stroke
1st stage (in3) N/A N/A .99 N/A
2nd stage (in3) .055 .16 .15 .16
Max. Handle Effort 72 lbs 111 lbs 104 lbs 125 lbs
Piston Stroke (in) .50 .81 1.00 .81
Piston Diameter
1st stage (in) .75 .94 1.13 .50
2nd stage (in) .38 .44 .44 N/A
Dimensions (in)
A7.31 15.50 16.75 8.25
B13.25 20.47 21.22 12.88
C1.13 1.28 1.00 1.28
D3.37 1.50 1.75 1.5
E1.13 1.25 2.13 1.88
F----
H12.56 18.25 20.75 8.5
J.75 1.18 1.14 1.18
L5.63 4.69 6.88 4.38
M- 2.56 .75 .51
N3.75 5.25 5.75 5.25
P3.18 - 4.76 -
Q----
R- - .83 -
S- - .31 -
T----
Weight 4.5 lbs 13 lbs 24 lbs 12 lbs
PH20
Manual Pump
PH39
Manual Pump
PH80
Manual Pump
PF65
Manual
Foot Pump
E
G
P
N
J
Release Valve
DAC
M
L
H
B
S
E
N
ADC
BM
L
40˚
H
J
3/8"-18NPTF
L
DA
H
50˚
J
C
3/8"-
18NPTF
BMF
S
PR
E
N
Q
T
Manual Hydraulic Pumps
Durable manual pumps utilized with Gardner Bender hydraulic bender sets.
• PH80 and PH84 models feature two-speed action for faster cylinder
cycle time.
• PH39 has economical single-speed design.
• All pumps contain internal high-pressure relief overload protection.
PH20
PH80 PH39 & PF65
w/o conversion kit
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
50
Hydraulic Bender Accessories
Quality accessories to increase bending efficiency.
See following page for Hydraulic Cylinder Specifications
.
Part # Description Weight
H8210 10' Rubber Hydraulic Hose w/ AH630 coupler 4 lbs
H864 6' Rubber Hydraulic Hose w/ AH630 coupler 2 lbs
HC913 6' Rubber Hydraulic Hose w/ CH604 coupler 3 lbs
HC963 6' Plastic Hydraulic Hose w/ CH604 coupler 2 lbs
HC927 10' Rubber Hydraulic Hose w/ CH604 coupler 4 lbs
HF100 Hydraulic Oil, Quart 2 lbs
HF101 Hydraulic Oil, Gallon 8 lbs
Part # For Use With 2A Thread Weight
A12 10-ton Cylinders 1 - 8 UNC 5 lbs
A29 25 ton Cylinders 11⁄2 - 16 UNC 7 lbs
Smooth Saddles
Hoses and Oil
Part # Description Weight
A630 Hydraulic Coupler: 1⁄4" Female Half .5 lb
Hydraulic Coupler: 1⁄4" Male Half .5 lb
C604 Hydraulic Coupler: 3⁄8" High-flow Female Half .5 lb
Hydraulic Coupler: 3⁄8" High-flow Male Half .5 lb
CD411 Universal Dust Cap for CR400 & CH604, plastic .1 lb
Couplers
2.75 1.875 .25
2.0
A630
C604
A12/A29 Dimensions
H864
HF101
When ordering a replacement
hydraulic cylinder for your bender
you must also order a new smooth saddle.
See chart above.
tip:
When installing a new
saddle, apply Loc-TITE™
to threads prior to installation.
note:
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
51
CH1211 CS106 CS1010 CS2510 CS2514 CD1012 CD308 CD3014
Cylinder Capacity (tons) 12.00 10.00 10.00 25.00 25.00 10.00 30.00 30.00
Stroke (in) 1.63 6.13 10.13 10.25 14.25 12.00 8.25 14.50
Max Cylinder Capacity (tons) Push 10.00 30.00 30.00
Max Cylinder Capacity (tons) Pull 4.00 5.00 5.00
Cylinder Effective Area (in2) 2.77 2.23 2.23 5.15 5.15
Cylinder Effective Area (in2)Push 2.23 6.51 6.51
Cylinder Effective Area (in2)Pull 0.80 3.00 3.00
Oil Capacity (in3) 4.52 13.67 22.59 52.79 73.39
Oil Capacity (in3)Push 26.80 53.67 92.70
Oil Capacity (in3)Pull 9.00 25.00 43.00
Collapsed Height (in) A4.75 9.75 13.75 14.75 18.75 18.00 15.25 21.63
Extended Height (in) B 6.38 15.88 23.88 25.00 33.00 30.00 23.50 36.13
Outside Diameter (in) D 2.75 2.25 2.25 3.38 3.38 2.88 4.00 4.00
Cylinder Bore Diameter (in) E2.13 1.69 1.69 2.56 2.56 1.69 2.88 2.88
Plunger Diameter (in) F1.38 1.50 1.50 2.25 2.25 1.38 2.13 2.13
Cyl. Base to Advance Port (in) H0.75 0.75 0.75 1.00 1.00 1.44 1.44 1.56
Top to Ret. Port (in) I2.25 3.19 3.19
Saddle Diameter (in) J– 1.38 1.38 2.00 2.00 1.38 2.00 2.00
Saddle Protr. from Plunger (in) K– 0.25 0.25 0.41 0.41 0.06 0.41 0.41
Plunger Internal Thread (in) O3⁄4-16 1-8 1-8 11⁄2-16 11⁄2-16 1-8 11⁄2-16 11⁄2-16
Plunger Thread Length (in) P0.63 0.75 0.75 1.00 1.00 1.00 1.00 1.00
Base Mounting Holes
Bolt Circle Diameter (in) U1.56 1.56 2.31 2.31 – – –
Thread (in) V5⁄16-18 5⁄16-18 1⁄2-13 1⁄2-13 – – –
Thread Depth (in) Z.50 .50 .75 .75 – – –
Collar Thread (in) W23⁄4-16 21⁄4-14 21⁄4-14 35⁄16-12 35⁄16-12 21⁄4-14 35⁄16-12 35⁄16-12
Collar Thread Length (in) X1.19 1.13 1.13 1.94 1.94 1.06 1.94 1.94
Center Hole Diameter (in) Y0.77
Weight (lbs) 6.20 9.80 14.00 31.00 39.00 31.00 40.00 64.00
Rating (tons) 12 10 10 25 25 10 30 30
Saddle (sold separately) (tons) 12 10 10 25 25 10 30 30
V
YUD
H
3/8"-
18NPT
F
P
O
W
X
Z
A
B
E
H
W
X
Z
K
A
E
B
P
O
J
F
V
3/8"-18NPT
D
U
P
O
H
X
B
A
N
I
K
3/8"-
18NPT E
D
J
F
W
CH1211 has a 1.88" diameter base
that protrudes .25" from base.
CH1211 model
CS106, CS1010,
CS2510, CS2514 models
CD1012, CD308,
CD3014 models
CD3014
CS106
CH1211
Hydraulic Cylinder Specifications
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
52
Part # Description Weight
BWF888 Sidewinder®Bender w/ out Shoe Groups 64 lbs
BF41 Urethane Roller Assembly & Shaft Assembly 3 lbs
BF42 2" EMT Strap 8 lbs
BF43 Frame, Retainer Pin and Decals 25 lbs
BF47 Shaft Assembly 3 lbs
BF48 2" Steel Sleeve and Strap Kit 4 lbs
BF49 Ratchet Assembly 9 lbs
BF52 Bend Instruction Decals 1 lb
BF90 Shoe Lock Kit (upgrade older frames) 2 lbs
BTI12520 Insert Teeth (for 11⁄4" - 11⁄2" and 2" shoes) 1 lb
CM260281 Urethane Roller Only 1 lb
BWF800 Bender Head Assembly
BT2000 BR12515
BR20000 BT12515
BT57510 BR57510
Jaws attach to shoes with chain.
Part # Description
BW72 Lever and Washer Kit
BW74 Drive Pawl and Spring Kit
BW75 Hold Pawl and Spring Kit
BW76 Pin and Spring Kit
Repair Kits for BF49
BF42 BF48
CM260281
BF47
BF41
BF90
BF52
See Repair Parts Sheet for a detailed
breakdown of these kits.
Clamping Clamping
Part # Jaw Range Conduit Weight Jaw Part # Weight
BT57510 1⁄2", 3⁄4" & 1" EMT 15 lbs BZ1306 2 lbs
BT12515 11⁄4" - 11⁄2"1
1⁄2" EMT 34 lbs BZ1307 4 lbs
BT2000* 2" EMT 39 lbs BZ13081 4 lbs
BR57510 1⁄2", 3⁄4" & 1" Rigid & IMC 18 lbs BZ1306 2 lbs
BR12515 11⁄4" - 11⁄2" Rigid & IMC 28 lbs BZ1307 4 lbs
BR20000 2" Aluminum Rigid 33 lbs BZ1308 3 lbs
Bending Shoes
*Shoe includes BZ1345 follow bar and strap.
A bend handle is not
included with these units.
A 6 ft. piece of 1" Dia. Rigid conduit
can be used.
tip:
Mechanical Sidewinder®Benders
A fully portable system that bends:
• 1⁄2" to 11⁄2" rigid steel, rigid aluminum, PVC-Coated
rigid and IMC conduit.
• 1⁄2" to 2" EMT conduit.
• Removable bender can be bolted onto workbench or
truck bed for unparalleled flexibility.
• 0° to 90° bend indicator built into the frame shows
bend angle while bending.
• Double-dog ratchet prevents shoe spring-back
during bends; allows fast release after bending.
• Interchangeable shoes adapt single bender frame
to cover widest range of conduit types.
BF17
BWF800
BWF88
BWF888
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
53
Part # Weight Part # Description Weight
BW11 78 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BR57510 1⁄2", 3⁄4" & 1" Rigid & IMC Shoe 18 lbs
Contains
Part # Weight Part # Description Weight
BW12 88 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BR12515 11⁄4" & 11⁄2" Rigid & IMC Shoe 28 lbs
Contains
Part # Weight Part # Description Weight
BW15 106 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BR57510 1⁄2", 3⁄4" & 1" Rigid & IMC Shoe 18 lbs
BR12515 11⁄4" & 11⁄2" Rigid & IMC Shoe 28 lbs
Contains
Sidewinder®1⁄2" - 1" Rigid / IMC Bender
Bends 1⁄2", 3⁄4" and 1" rigid steel and IMC conduit.
• Shoe lock slips into place and removes easily for
quick change-outs.
• Fully portable.
Sidewinder® 11⁄4" - 11⁄2" Rigid / IMC Bender
Bends 11⁄4" and 11⁄2" rigid steel and IMC conduit.
• Shoe tooth inserts can be replaced in the field
which allows extended service life.
• Order part number BTI12520.
Sidewinder® 1⁄2" - 11⁄2" Rigid / IMC Bender
Bends 1⁄2" to 11⁄2" rigid steel and IMC conduit.
• Combines features and bending capabilities
of BW11 and BW12.
• Able to handle the most commonly used rigid
and IMC conduit sizes.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
54
Part # Weight Part # Description Weight
BW20 175 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BW20S BR57510 1⁄2", 3⁄4" & 1" Rigid & IMC Shoe 18 lbs
(Shoe Set) BR12515 11⁄4" & 11⁄2" Rigid & IMC Shoe 28 lbs
BR20000 2" Rigid Aluminum Shoe 33 lbs
CM4 4-cubic-foot Case 26 lbs
Contains
Shoes available
separately or as
a BW20S Set
Sidewinder®Bender for All
Conduit Types
Bends 1⁄2" to 11⁄2" rigid and IMC, 1⁄2" to 2"
EMT, 1⁄2" to 2" rigid aluminum and 1⁄2" to 11⁄2"
PVC-coated rigid conduit.
• The most comprehensive Sidewinder®set for
every job.
• Larger shoes feature filed-replacement-tooth
inserts for extended service life.
• Set includes metal storage box.
Sidewinder®Rigid / IMC & Rigid
Aluminum Conduit Bender
Bends 1⁄2" to 11⁄2" rigid and IMC and 2" rigid
aluminum conduit. Adds 2" rigid aluminum
conduit bending capability to 1⁄2" to 11⁄2" rigid
and IMC capacity of BW15 Sidewinder®.
• Larger shoes feature field-replaceable tooth
inserts for extended service life.
• Set includes metal storage box.
Part # Weight Part # Range Weight
BW30 290 lbs BWF888 Sidewinder® Bender Frame 64 lbs
BW30S BT57510 1⁄2", 3⁄4", & 1" EMT Shoe 18 lbs
(Shoe Set) BT12515 11⁄4" & 11⁄2" EMT Shoe 28 lbs
BT2000 2" EMT Shoe 28 lbs
BR57510 1⁄2", 3⁄4" & 1" Rigid & IMC Shoe 28 lbs
BR12515 11⁄4" & 11⁄2" Rigid & IMC Shoe 28 lbs
BR20000 2" Rigid Aluminum 28 lbs
CM7 7-cubic-foot Case 51 lbs
Contains
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
55
Part # Weight Part # Description Weight
BW27 210 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BW27S BT12515 11⁄4" & 11⁄2" EMT Shoe 28 lbs
(Shoe Set) BT2000 2" EMT Shoe 39 lbs
BR57510 1⁄2", 3⁄4" & 1" Rigid & IMC Shoe 18 lbs
BR12515 11⁄4" & 11⁄2" Rigid & IMC Shoe 28 lbs
CM4 4-cubic-foot Case 26 lbs
Contains
Shoes available
separately or as
a BW27S Set
Sidewinder®Bender for Most
Conduit Types
Bends 1⁄2" to 11⁄2" rigid and IMC, 11⁄4" to 2" EMT
and 1" to 11⁄2" PVC-coated rigid conduit.
• The economical choice for bending the most
popular sizes of rigid/IMC and larger
EMT conduit.
• Set includes metal storage box.
Sidewinder®EMT & PVC-Coated
Rigid Conduit Bender
Bends 2" EMT and 11⁄2" PVC-coated rigid conduit.
• Field-replaceable shoe-tooth inserts extend
service life.
• Order part number BTI12520.
Sidewinder®EMT & PVC-Coated
Rigid Conduit Bender
Bends 1⁄2" to 2" EMT and 1⁄2" to 11⁄2"
PVC-coated rigid conduit.
• Larger shoes feature filed-replacement-tooth
inserts for extended service life.
• Set includes metal storage box.
Part # Weight Part # Description Weight
BW201 99 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BT2000 2" EMT Shoe 39 lbs
Contains
Part # Weight Part # Description Weight
BW221 184 lbs BWF888 Sidewinder®Bender Frame 64 lbs
BW221S BT57510 1
⁄2", 3
⁄4" & 1" EMT Shoe 18 lbs
(Shoe Set) BT12515 11
⁄4" & 11⁄2" EMT Shoe 28 lbs
BT2000 2" EMT Shoe 39 lbs
CM4 4-cubic-foot Case 26 lbs
Contains
Part Number 960 960H 961 961H 962 962H
Description Head Only Head & Handle Head Only Head & Handle Head Only Head & Handle
Application 1⁄2" EMT 3⁄4"
EMT /
1⁄2"
Rigid
1" EMT /
3⁄4"
Rigid
Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum
Weight 1.34 lbs 5.06 lbs 1.58 lbs 5.34 lbs 3.16 lbs 7.01 lbs
Bend Radius 3.69" 3.69" 4.74" 4.74" 5.81" 5.81"
EMT Size 1⁄2"1⁄2"3⁄4"3⁄4"1" 1"
Rigid Size ——
1⁄2"1⁄2"3⁄4"3⁄4"
These benders
available with or without
high-strength steel handle
Industry Standard Style
30° bend when handle is
straight up
Bigger Hook
With a 5x durability factor
Bigger Foot Pedal
40% larger
More Foot Room
Allows for a booted foot
Bend-Back Channel
Easily corrects conduit
over-bends
Vise-Mate™
Holds conduit while cutting
or reaming
Big Ben™ Conduit Hand Bender
GB's new series of Big Ben™ aluminum hand benders has improved
traditional hand benders by enlarging the hook, increasing the foot
pedal size and clearance, highlighting the markings and
incorporating a dual sight-line system for bending on the floor
or in the air. GB's new Big Ben™ series offers industry
standard markings to simplify the contractor's job. Made
of rugged, heat-treated aluminum, the Big Ben™ series
is backed by a lifetime warranty and is available in the
most common sizes of 1⁄2", 3⁄4" and 1".
• All models include embossed sight lines for 10°, 22°,
30°, 45°, 60° and 90°.
• Industry-standard markings– 30° bend when handle is straight up.
• Bigger hook with a 5x durability factor.
• Bigger foot pedal– 40% larger.
• More foot room allows for a booted foot.
• Bend-back channel easily corrects conduit over-bends.
• Vise-Mate™ holds conduit
while cutting or reaming.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
56
SEE PG FOR MORE INFO ON
59 Handles
Warranty
Lifetime
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
57
These benders
are available with or without
high-strength steel handle
Gardner®EMT / Rigid
Aluminum Hand Benders (Series 930B-933)
Bends 1⁄2" to 11⁄4" EMT, and 1⁄2" to 1" rigid and rigid
aluminum conduit.
• Built-in acrylic level gauge helps make precise bends
in half the time.
• All models include embossed sight lines for 10°, 22.5°,
30°, 45°, 60° and 90°.
• Patented Vise-Mate™ holds conduit steady as it is cut
to appropriate size.
Part Number 930B 930H 931B 931H
Description Head Only Head & Handle Head Only Head & Handle
Application 1⁄2" EMT 3⁄4"
EMT /
1⁄2"
Rigid
Fits Handle # BH-75 Included BH-75 Included
Material Aluminum Aluminum Aluminum Aluminum
Weight .8 lbs 5.3 lbs 2.3 lbs 6.4 lbs
Bend Radius 5" 5" 6" 6"
EMT Size 1⁄2"1⁄2"3⁄4"3⁄4"
Rigid Size ——
1⁄2"1⁄2"
Part Number 932 932H 933
Description Head Only Head & Handle Head Only
Application 1" EMT
/
3⁄4"
Rigid
11⁄4"
EMT /
1
" Rigid
Fits Handle # BH-100 Included BH-125
Material Aluminum Aluminum Aluminum
Weight 4.1 lbs 10 lbs 7.75 lbs
Bend Radius 8" 8" 12"
EMT Size 1" 1" 11⁄4"
Rigid Size 3⁄4"3⁄4"1"
Insert conduit through Vise-Mate™
opening and cut to desired length.
SEE PG FOR MORE INFO ON
59 Handles
Warranty
Lifetime
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
Iron Hand Benders (Series 920-923)
Bends 1⁄2" to 11⁄4" EMT and 1⁄2" to 1" rigid and rigid
aluminum conduit.
• Cast-in-place degree marks facilitate accurate bends.
• Constructed of rugged-malleable iron for strength and durability.
• Arrow and diamond indicate beginning and
back-of-bend locations.
Warranty
Lifetime
58
These benders
are available with or without
high-strength steel handle
Part Number 920 920H 921 921H
Description Head Only Head & Handle Head Only Head & Handle
Application 1⁄2" EMT 3⁄4"
EMT /
1⁄2"
Rigid
Fits Handle # BH-75 Included BH-75 Included
Material Iron Iron Iron Iron
Weight 2.7 lbs 7.2 lbs 5 lbs 9.6 lbs
Bend Radius 5" 5" 6" 6"
EMT Size 1⁄2"1⁄2"3⁄4"3⁄4"
Rigid Size ——
1⁄2"1⁄2"
Part Number 922 922H 923
Description Head Only Head & Handle Head Only
Application 1" EMT
/
3⁄4"
Rigid
11⁄4"
EMT /
1
" Rigid
Fits Handle # BH-100 Included BH-125
Material Iron Iron Iron
Weight 4.9 lbs 14.5 lbs 14 lbs
Bend Radius 8" 8" 11"
EMT Size 1
"
1
"
11⁄4"
Rigid Size 3⁄4"3⁄4"1"
SEE PG FOR MORE INFO ON
59 Handles
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
59
BH-125
BH-100
BH-75
Hand Bender Handles
High quality, pre-threaded bender handles for
all Gardner Bender bender heads.
• Constructed of high-strength steel.
• Powder painted for increased durability.
• Comfort grip design ensures increased
grasping capabilities.
Fits Aluminum Fits Iron
Part # Size Bender # Bender # Weight
BH-75 3⁄4" NPT x 38" long
930B, 931B, 960, 961
920, 921 3.5 lbs
BH-100 1" NPT x 44" long 932, 962, 820, 821 922 5.5 lbs
BH-125 11⁄4" NPT x 54" long 933, 822 923 7.2 lbs
Hickey Bending Heads
For 1⁄2" to 1" rigid conduit.
• Manufactured using permanent mold process with
high-strength, heat-treated aluminum.
• Lightweight and extremely durable.
820
822
821
Part # Rigid Size Fits Bender Handle # Weight
820 1⁄2" BH-100 .9 lb
821 3⁄4" BH-100 1.2 lbs
822 1" BH-125 2.2 lbs
HotTube™ PVC Bender for
1⁄2" to 2" Conduit (schedule 40-80)
This patented high-production bender can
simultaneously heat up to five lengths of 1⁄2"
conduit and up to three lengths of 3⁄4" conduit,
without rotating.
• Adjustable thermostatic control heats conduit
fast and maintains perfect bending temperature.
• Patented technology enables HotTube™ to maintain temperature
in wide range of ambient temperatures and wind conditions.
• No need to rotate conduit. Won’t burn or scorch.
• Insulated, weatherproof housing provides safe, cool operation–
unit is portable immediately after use.
• Dimensions: 273⁄8" x 51⁄2" x 81⁄2".
• Temperature Range: 0 °F - 350 °F.
Power Requirements
Part # Description Watts Volts Amps Weight
BHT-520A 1⁄2" - 2" HotTube™ 1440 115/120 12 24 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
60
HotBox™ PVC Bender for 1⁄2" to 2" Conduit
(schedule 40-80)
Complete PVC bending system includes
Bend-Guide™ bending gauge.
• Highly polished reflector surfaces heat conduit
quickly and evenly.
• Low power consumption.
• Lightweight with convenient carrying handle and cover clasp.
• Bending guide adjusts for 0° to 90° bend segments in any radius
from 6" to 12".
• Dimensions: 291⁄2" x 7" x 71⁄8".
• Temperature Range: 0 °F - 450 °F.
Power Requirements
Part # Description Watts Volts Amps Weight
BHB-520D 1⁄2" - 2" HotBox™ 1450 115/120 12 17 lbs
BHE-50K Replacement Heating Element 1450 115/120 12 1 lb
Convenient Bend-Guide™ is included with every BHB-520D.
HotBox™ PVC Bender for 1⁄2" to 4" Conduit
(schedule 40-80)
Meets most PVC bending needs. Accommodates
conduit range from 1⁄2" to 4".
• Highly polished reflector surfaces heat conduit
quickly and evenly.
• Large wheels provide job-site portability.
• Allows conduit to be reheated and reformed.
• Dimensions: 541⁄2" x 81⁄2" x 111⁄2".
• Temperature Range: 0 °F - 400 °F.
Power Requirements
Part # Description Watts Volts Amps Weight
BHB-540A 1⁄2" - 4" HotBox™ 2400 115/120 20 34 lbs
BHE-540 Replacement Heating Element 2400 115/120 20 3.5 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
61
HotBox™ PVC Bender for 1⁄2" to 6" Conduit
(schedule 40-80)
Accommodates conduit range from 1⁄2" to 6". Specially
designed covers and heat flow system allow heating of
shorter lengths as well as lengths sufficient for 48"
radius, 90° elbows.
• Highly polished reflector surfaces heat conduit quickly and evenly.
• Power drive model automatically rotates conduit for faster bends.
• Large wheels provide job-site portability.
• Allows conduit to be reheated and reformed.
• Dimensions: 74" x 111⁄2" x 14".
• Temperature Range: 0 °F - 400 °F.
BHB-560P
Power Requirements
Part # Description Watts Volts Amps Weight
BHB-560 1⁄2" - 6" HotBox™ 5500 230 24 60 lbs
BHB-560P 1⁄2" - 6" HotBox™ w/ Power Rotator 5500 230 24 68 lbs
BHE-560 Replacement Heating Element 5500 230 24 8.5 lbs
HotBlanket™ PVC Benders for 1⁄2" to 4"
Conduit (all schedules)
New improvements have made this
family of conduit benders the most durable
and economical bending system in the industry.
• Internal thermostatic control will not scorch or burn conduit.
• Use in any in-place position.
• Thermostatic control heats pipe fast, even in cold
or windy conditions.
• Multiple circuit design extends the life of the blankets.
• Multiple wound heavy-gauge wire ensures the longest life
of any bending blanket.
Conduit Dimensions Power Requirements
Part # Size (L x W) Watts Volts Amps Weight
BB5150 1⁄2" - 11⁄2" 18" x 71⁄2" 310 120 2.6 2 lbs
BB2030 2" - 3" 25" x 111⁄4" 690 120 6.3 3 lbs
BB3040 3" - 4" 36" x 143⁄8" 1120 120 10.2 6 lbs
Wrap
Heat
Bend
PVC Plug Set
Prevents conduit from collapsing or deforming by supporting
the inside surface during heating and bending.
• Decreases heating time by trapping hot air in the conduit.
• Use with 2" and larger conduit.
• Includes durable storage case.
Components
Part # Description Weight Part # Description Weight
BVS-240 2" - 4" PVC Plug Set 6 lbs BVP20 2" PVC Plug .32 lb
BVP25 21⁄2" PVC Plug .38 lb
BVP30 3" PVC Plug .44 lb
BVP40 4" PVC Plug .44 lb
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
62
Guide to Bending Booklet
Easy-to-use instructions for completing multiple types
of conduit bends.
• Contains quick reference charts and guides.
• Easy to carry.
• Provided at no charge.
Part # Description
E507 Guide to Profitable Bending Booklet
Tool-Guard™ Metal Storage Cases
Shelter equipment from dust, grease, dirt or loss on the
jobsite, maintenance area or shop.
• Constructed of durable 16-gauge steel with quality
arc-welded seams.
• Dual rolled-lip design resists sprung hinges, keeps cover
aligned, adds rigidity and strength.
• Continuous heavy-duty hinges stand up to rugged use.
• Water-resistant design retards leakage.
• Bottom skids enhance protection and permit easy
forklift movement.
• Recessed closure shields padlock from cutting and
prying attempts.
(lock not included).
• Painted with rust-resistant primer and finished in
durable red enamel.
CM7
CM20
Size Inside Dimensions Shelf Dimensions
Part # cu. in. Length Width Rear Height Front Height Length Width Weight
CM4 41⁄231" 14" 14" 14" – – 56 lbs
CM7 8 36" 19" 18" 18" – – 98 lbs
CM20 28 60" 24" 28" 28" 591⁄2"5
1⁄4" 182 lbs
Use #5 Master Lock™
when locking boxes.
tip:
CONDUIT FISHING
67
69
73
74
81
Gardner Bender offers a complete range
of solutions for conduit fishing and cable
pulling, with the contractor in mind. From
fish tapes to powered cable pullers, our
products are designed around durability,
innovation and ease of use.
63
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
64
Blower Systems
JetLine® Super Blower™ (Electric) . . . . .66
Super Blo-Vac™ System (Blower/Vacuum) .67
Cable Pullers and Accessories
2,000 lb Mini-Brutus™ Powered Puller . . .80
8,000 lb Brutus™ Powered Puller . . . . . . .81
Sub-Assembly Kits . . . . . . . . . . . . .81-82
Brutus™ Powered Puller
Application Instructions . . . . . . . . .83-85
Hook Sheaves . . . . . . . . . . . . . . . . . . . . . .86
Tension Meter . . . . . . . . . . . . . . . . . . . . . .86
Conduit Measuring Tape . . . . . . . . . . . . . .73
CO2 Systems
Air Compressor Seal-Off . . . . . . . . . . . . . .71
CO2 Refill Connector . . . . . . . . . . . . . . . .71
Powr House™ Conduit Fishing Systems . .69
Powr-Pak I™ 5 lb. Portable System . . . . .70
Powr-Pak II™ 5 lb. Basic System . . . . . . .70
Fish Tapes and Accessories
Cable Snake™ Flat Wire Tape . . . . . . . . . .76
Cable Snake™ Steel Fish Tapes . . . . . .75-76
Economy Fish Tape . . . . . . . . . . . . . . . . . .77
Fiberline™ Non-Conductive
Fiberglass Fish Tapes . . . . . . . . . . . . .77
Fish Tape Ball . . . . . . . . . . . . . . . . . . . . . .79
Fish Tape Leader . . . . . . . . . . . . . . . . . . . .78
Nylo-Flex™ Non-Conductive
Nylon Fish Tapes . . . . . . . . . . . . . . . . .78
Replacement Tapes - Steel . . . . . . . . . . . .77
Rewind™ Fish Tape Winder . . . . . . . . . . .75
Streamline™ Steel Fish Tapes . . . . . . . . . .75
UpperHand™ Steel Fish Tapes . . . . . . . . .74
UpperHand™ Non-Conductive
Fiberglass Fish Tapes . . . . . . . . . . . . .74
Fish Sticks
12’ Fish Ease™ . . . . . . . . . . . . . . . . . . . . .79
15’ Glo Fish™ . . . . . . . . . . . . . . . . . . . . . .79
Material Handling
Hoist Lift (Hi-Hoist™) . . . . . . . . . . . . . . . .94
Reel Rollers
30" Reel Roller . . . . . . . . . . . . . . . . . .91
Handy-Saver™ Reel Roller . . . . . . . . .91
Reel Jacks - Telescoping . . . . . . . . . . . . .91
Wire Caddies & Carts
Deluxe Spool Cart & Caddy Combo . .93
Hand Wire Caddy . . . . . . . . . . . . . . . .92
Heavy-Duty Spool Cart &
Caddy Expander Combo . . . . . . .93
Portable Wire Caddy . . . . . . . . . . . . . .92
Portable Wire Dispenser . . . . . . . . . . .94
Replacement Parts . . . . . . . . . . . . . . .94
Spool Caddy Cart . . . . . . . . . . . . . . . .92
Wire Dispenser . . . . . . . . . . . . . . . . . .93
Lubricants
Wire-Aide™ . . . . . . . . . . . . . . . . . . . . . . .86
Poly-Gel™ . . . . . . . . . . . . . . . . . . . . . . . . .87
Super-Slick™ . . . . . . . . . . . . . . . . . . . . . .88
Pull Line / Line Carriers
Foam Line Carriers . . . . . . . . . . . . . . . . . .72
Heavy-Duty Bulk Nylon Line . . . . . . . . . . .73
Inflatables®Line Carriers . . . . . . . . . . . . .71
Missile Line Carriers . . . . . . . . . . . . . . . . .71
Poly-Pull™ Line . . . . . . . . . . . . . . . . . . . .73
Power Saver™ Line Packages . . . . . . . . . .72
Tag Along™ Line Packages . . . . . . . . . . . .72
Rope
Rope Selection Guide . . . . . . . . . . . . . . . .90
Poly-Pro™ General Purpose Rope . . . . . .89
Super Tuff-Pull™ Double Braided Rope . .88
Tuff-Pull™ Single Braided Rope . . . . . . . .89
Vacuum / Blowers
Super Blo-Vac™ System . . . . . . . . . . . . . .67
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
65
Conduit Conduit Run Length Over
Size 100' 150' 200' 300' 400' 500' 600' 700' 800' 900' 1,000'
1⁄2"
3⁄4"
1"
11⁄4"
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
Conduit Installation Chart
• JetLine®Super Blower™ System (B60) Page 68
• Super Blo-Vac™ System (BV208DA) Page 69
The following chart illustrates typical conduit installation. Fewer bends and lighter pull lines can increase
the maximum distances obtainable. The chart below refers to a typical run with (4) 90° bends and no
obstructions or leaks, using JetLine®PL232 Pull Line (200lb test) and foam line carriers.
B60 (21⁄2" - 6")
BV208DA (1⁄2" - 6")
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
66
2
4
5
JetLine®Super Blower™ System
The most powerful blower system in the market.
• Blower unit delivers 275 cfm at 3 psi – more than
enough to blow 1⁄2" Poly-Pull™ rope 1000' or
more through conduit up to 6" diameter.
• Lightweight (35 lbs) and compact
(24" x 71⁄2" x 81⁄4") power unit can be
hand-carried to the work area.
• Extra-long 25' hose allows power unit to be
located outside the manhole or vault.
• All work is done from one end of the conduit, permitting one-person
operation. Works on 115 V AC power.
• System includes patented Dial-A-Line™ Seal-Off System; eliminates
extra steps by allowing simple “dial” selection of feed-thru opening size
for up to 1⁄2" pull rope.
• Can use pull rope and True Tape™ conduit measuring tape simultaneously.
• 115 V AC, 23 A; Power Consumption 2.65 kw.
• Specifications: max. 4 psi; 150 cfm; 3 motors (11⁄2hp each).
Part # Description Weight
B60 JetLine®Super Blower™ Conduit Fishing System 56 lbs
Part # Description Weight I.D. #
B3000 Power Unit 34 lbs 1
126025* 25' x 21⁄2" Heavy-duty Hose 12 lbs 2
B26 Large Dial-A-Line™ Seal-Off Body .7 lb 3
BV24 Seal-Off for 21⁄2" - 6" conduit 3.3 lbs 4
Part # Description Weight I.D. #
F400B Line Carrier for 3", 31⁄2", 4" conduit .1 lb 5
M5000 5" Plastic Line Carrier .4 lb 6
M6000 6" Plastic Line Carrier .5 lb 7
System Includes:
*Order catalog number 901152 to replace hose cuff end as necessary.
6
7
3
1
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
67
15' x 1
1
⁄
2
" heavy-duty hose available. Order Part #125615.
Super Blo-Vac™ Specifications
Vacuum* (inches of waterlift) 134"
Maximum Air Pressure* 5 psi
Electrical Rating 120 V AC, 13.8 A
Type of Motor By-pass
Number of Impeller Stages 3
Recovery Capacity** 9 gallons
Net Weight 55 lbs
Height w/Cart 41"
Motor Brush Life 750 hours
* Will vary with voltage and atmospheric conditions
@ sealed vacuum.
** When using Recovery Compartment and Tool
Storage Compartment together.
Part # Description Weight
BV208DA Super Blo-Vac™ Power Conduit Fishing System 63 lbs
Part # Description Weight I.D. #
1525 Cart 25 lbs 1
JV12 Seal-off for 11⁄4" - 21⁄2" conduit .3 lb 2
LP3200B (5) 200' Line Pkgs for 3⁄4" conduit .9 lb 3
LP4200 (5) 200' Line Pkgs for 1" conduit 1.6 lbs 4
LP2206T (2) 400' Line Pkgs for 11⁄4" or larger conduit .6 lb 5
LP2207T (2) 800' Line Pkgs for 11⁄4" or larger conduit 1 lb 6
JV210 Filter Bag (for vacuuming) .1 lb 7
12568 8' x 11⁄2" Heavy-duty Hose 3.3 lbs 8
BV12 Hose Adapter (to Dial-A-Line™ body) .1 lb 9
JV07 Dial-A-Line™ Seal-off Body .2 lb 10
System Includes:
Part # Description Weight I.D. #
JV08 Short Seal-off for 1⁄2" - 11⁄4" conduit .1 lb 11
JV09 Long Seal-off for 1⁄2" - 11⁄4" conduit .1 lb 12
B26 Large Dial-A-Line™ Seal-off Body .7 lb 13
BV23 Seal-off for 11⁄4" - 21⁄2" conduit .3 lb 14
BV24 Seal-off for 21⁄2" - 6" conduit 3.3 lbs 15
BV1281 Crevice Tool (for clean-up) .1 lb 16
LP2150 (10) 150' Line Pkgs for 1⁄2" conduit .8 lb 17
LP3450 (5) 450' Line Pkgs for 3⁄4" conduit 1.4 lbs 18
LP4450 (5) 450' Line Pkgs for 1" conduit .8 lb 19
FC1-10 (1 ea) Foam Line Carriers for 1⁄2" - 4" conduit 1 lb 20
Super Blo-Vac™ System
This rugged blower/vacuum system handles 1⁄2" to 6" conduit.
• Blows or vacuums most debris and water from conduit runs.
• High-impact, lightweight polypropylene construction
will not rust or dent.
• Compartments can be unlatched and separated.
Recovery compartment capacity expandable to 9 gallons
by using bottom tool storage compartment.
• 10" diameter metal hubbed wheels allow mobility.
• Complete package includes patented
Dial-A-Line™ Seal-offs, Inflatable®
line carriers, foam line carriers,
Power Saver™ and Tag-Along™ line
packages. All accessories store neatly
in self-contained tool storage compartment.
• Three-stage blower/vacuum motor delivers
up to 25% more power for longer runs and
faster operation.
• 115 V AC, 13 A, 141⁄4" x 161⁄2" x 39 3⁄4"
• Specifications: max. 5 psi; 95 cfm; 21⁄4hp; 134" vacuum.
Tool Storage
Compartment
7
16
8
1
15
14
2
13
5, 6
3, 4, 17, 18, 19
11
10
12 9
20
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
68
Conduit Conduit Run Length Over
Size 100' 150' 200' 300' 400' 500' 600' 700' 800' 900' 1,000'
1⁄2"
3⁄4"
1"
11⁄4"
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
Conduit Installation Guide
• Powr-Pak II™ 5-lb Basic System (JO25CA + 1103N) Page 72
• Powr-Pak I™ 5-lb Portable System (JO25) Page 72
• PowrHouse™ System with 20-lb CO2(JO225LC + 1208) Page 71
• PowrHouse™ System with 50-lb CO2(JO225LC + 950) Page 71
The following chart illustrates typical conduit installation. Fewer bends and lighter pull lines can increase
the maximum distances obtainable. The chart below refers to a typical run with (4) 90° bends and no
obstructions or leaks, using JetLine®PL232 Pull Line (200-lb test) and foam line carriers.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
69
Part # Description Weight
JO225LC Powr House™ Conduit Fishing System without CO2Cylinder 40 lbs
950 50 lb CO2Cylinder (full) (JO250 only) 161 lbs
1208 20 lb CO2Cylinder (full) (JO220 only) 58 lbs
JO225LC & 950
(50 lb Cylinder)
J0225LC & 1208
(20 lb Cylinder)
JO225LC Powr House™
CO2System w/o Cylinder
Part # Description Weight I.D. #
1105A* 12' Valve Assembly with UG12 hose only 3.6 lbs 1
1215 Seal-off for 1⁄2" - 1" conduit with 2' hose .4 lb 2
1142 Angle Adapter (for 1215 Seal-off) .1 lb 3
1216 Seal-off for 11⁄4" - 21⁄2" conduit with 2' hose .8 lb 4
1206 Seal-off for 11⁄2" - 6" conduit 5.2 lbs 5
LP2150 (10) 150' Line Pkgs for 1⁄2" conduit 1.3 lbs 6
LP3200 (5) 200' Line Pkgs for 3⁄4" conduit .8 lb 7
LP3300 (5) 300' Line Pkgs for 3⁄4" conduit 1.1 lbs 8
LP4300 (5) 300' Line Pkgs for 1" conduit 1.1 lbs 9
LP2206T (3) 400' Line Pkgs for 11⁄4" or larger conduit .6 lb 10
LP2207T (3) 800' Line Pkgs for 11⁄4" or larger conduit .6 lb 11
LP2208T (3) 600' Line Pkgs for 11⁄4" or larger conduit .9 lb 12
Part # Description Weight I.D. #
FC1 Foam Line Carrier for 1⁄2" conduit .1 lb 13
FC2 Foam Line Carrier for 3⁄4" conduit .1 lb 14
FC3 Foam Line Carrier for 1" conduit .1 lb 15
FC4 Foam Line Carrier for 11⁄4" conduit .1 lb 16
FC5 Foam Line Carrier for 11⁄2" conduit .1 lb 17
FC6 Foam Line Carrier for 2" conduit .1 lb 18
FC7 Foam Line Carrier for 21⁄2" conduit .1 lb 19
FC8 Foam Line Carrier for 3" conduit .1 lb 20
FC9 Foam Line Carrier for 31⁄2" conduit .1 lb 21
FC10 Foam Line Carrier for 4" conduit .1 lb 22
FC11 Foam Line Carrier for 5" conduit .1 lb NS
FC12 Foam Line Carrier for 6" conduit .1 lb NS
Contents Included in JO225LC:
*Order UG12 for hose only. Order UG121112 for hose and coupling assembly. NS=Not Shown
Powr House™ Conduit Fishing Systems
For 1⁄2" to 6" conduit.
• Completely self-contained with no electrical power source required. Use 50 lb
cylinder as source for refilling smaller cylinders (requires RV5 refill connector).
• Quick, easy setup.
• Metered operating valve controls CO2volume to minimize waste and
maximize safety.
• Locking pull ring prevents accidental discharge.
• 1" tank thread.
• Specifications: 840 psi @ 70 °F.
18
15
17 16
19
20
14 13
21
22
9
6
7
8
1
2
5
4
3
11 12
10
Accessories included
with JO225LC
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
70
Part # Description Weight
JO25 Powr-Pak I™ Portable CO2Conduit Fishing System 16 lbs
JO25A Powr-Pak I™ Portable CO2Conduit Fishing System w/out Cylinder 10 lbs
Part # Description Weight I.D. #
1103N 5-lb-capacity CO2Cylinder w/valve (full) 18 lbs 1
1102 Shoulder Strap .4 lb 2
1215 2' hose seal-off for 1⁄2" - 1" conduit .4 lb 4
1142 Angle Adapter (for 1215 Seal-off) .1 lb 5
1216 2' hose seal-off for 11⁄4" - 21⁄2" conduit .8 lb 6
RV5 Refill Connector (with 1137 Cone) .8 lb 7
FC1 (5) Foam Line Carriers for 1⁄2" conduit .1 lb 8
Part # Description Weight I.D. #
F125B (4) Line Carriers for 3⁄4" - 11⁄2" conduit .6 lb 9
F250B (2) Line Carriers for 11⁄2" - 21⁄2" conduit .6 lb 10
LP2150 (10) 150' Line Pkgs for 1⁄2" conduit 1.3 lbs 11
LP3200 (5) 200' Line Pkgs for 3⁄4" conduit .8 lb 12
LP4300 (5) 300' Line Pkgs for 1" conduit 1.1 lbs 13
LP1701B 1000' Nylon Bulk Line 1 lb 14
LP1702B 2000' Nylon Bulk Line 1 lb 15
System Includes:
Powr-Pak II™ 5-lb Basic System
For 1⁄2" to 1" conduit.
• Same Powr-Pak™ 5-lb cylinder with basic accessories.
• Unit can be expanded with other accessories.
• 3⁄4" NGA tank thread.
• Includes convenient portable caddy.
Part # Description Weight I.D. #
JO25CA Powr-Pak II™ Portable CO2Conduit 10 lbs NS
Fishing System w/out Cylinder
1103N 5-lb Capacity CO2Cylinder w/valve (full) 18 lbs 1
Part # Description Weight I.D. #
1102 Shoulder Strap .4 lb 2
1505 Caddy w/ Tool Box 5.8 lbs 3
1215 Seal-off for 1⁄2" - 1" conduit with 2' hose .4 lb 4
1142 Angle Adapter (for 1215 Seal-Off) .1 lb 5
LP2150 (10) 150' Line Pkgs for 1⁄2" conduit 1.3 lbs 6
LP3200 (5) 200' Line Pkgs for 3⁄4" conduit .8 lb 7
Part # Description Weight I.D. #
LP4300 (5) 300' Line Pkgs for 1" conduit 1.1 lbs 8
LP1703 1400' Nylon Bulk Line .9 lb 9
FC1 Foam Line Carrier for 1⁄2" conduit .1 lb 10
FC2 Foam Line Carrier for 3⁄4" conduit .1 lb 11
FC3 Foam Line Carrier for 1" conduit .1 lb 12
System Includes:
Powr-Pak I™ 5-lb Portable System
For 1⁄2" to 21⁄2" conduit.
• Exclusive from Gardner Bender.
• Lightweight, portable system
requires no electrical power.
• Metered operating valve controls
volume, preventing waste.
• 5 lb cylinder can be refilled from
larger cylinder using
#RV5 refill connector.
• Locking pull ring prevents
accidental discharge.
• 3⁄4" NGA tank thread.
• Specifications: 840 psi @ 70 °F.
1
2
9
10
5
8
6
4
7
14
11 13 12
15
2
3
1
12
11
10
7
8
6
4
95
NS=Not Shown
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
71
CO2Refill Connector
Connection for refilling CO2cylinders.
• Flexible urethane hose with quick disconnects.
• Saves time.
Air Compressor Seal-Off
Use with most commercial air compressors to blow pull line into
conduit or duct. For use with 2" to 6" conduit sizes.
• The Dial-A-Line™ feature is incorporated into the compressor fitting.
• Maximum 200 cfm rating.
• Shut-off valve.
1⁄2" N.P.T.
(AM-2)
Air Coupler
The Inflatables®Line Carriers
For 3⁄4" to 6" conduit.
• Each inflatable line carrier adjusts to fit the conduit; four items
cover a range of eleven diameters of rigid, IMC, EMT, PVC or
flexible conduit, or single-bore duct.
• Heavy-gauge waterproof woven nylon assures long life.
Missile Line Carriers
For 2" to 6" conduit.
• Fast blowing and vacuuming of 2" to 6" diameter conduit by
low-friction plastic carriers.
• Easily removed from conduit if stuck or jammed.
Sold as complete assembly only.
F600
F250 F400
M5000
M6000
M4000
M2000 M3000
Part # Description Weight
RV5 CO2Cylinder Refill Connector .8 lb
Part # Description Weight
CB21V Air Compressor Seal-off 6 lbs
Part # Qty Description Weight
F125 5/bx The Inflatables®Line Carrier for 3⁄4", 1" & 11⁄4" conduit .6 lb
F250 5/bx The Inflatables®Line Carrier for 11⁄2", 2" & 21⁄2" conduit .6 lb
F400 2/bx The Inflatables®Line Carrier for 3", 31⁄2" & 4" conduit .3 lb
F600 2/bx The Inflatables®Line Carrier for 5" & 6" conduit .3 lb
Part # Qty Description Weight
M2000 1/bg Missile Line Carrier for 2" conduit (w/rope eye) .1 lb
M3000 1/bg Missile Line Carrier for 3" conduit (w/rope eye) .3 lb
M4000 1/bg Missile Line Carrier for 4" conduit (w/rope eye) .3 lb
M5000 1/bg Missile Line Carrier for 5" conduit (w/rope eye) .4 lb
M6000 1/bg Missile Line Carrier for 6" conduit (w/rope eye) .5 lb
Use in 21⁄2" - 6" conduit only. To avoid rapid pressure
build-up, do not use on smaller sizes of conduit.
F125 not pictured.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
72
Foam Line Carriers
For 1⁄2" to 6" conduit.
• Cleans water and debris from most conduit – rigid, EMT,
IMC, PVC or flexible.
• Durable for indefinite re-use.
Power Saver™ Line Packages
For 1⁄2" to 1" conduit.
• Carrier and pull line included in a single, handy package.
Line is dispensed smoothly and quickly as line carrier
moves through conduit.
• No knots to tie, no foam carriers to retrieve.
• Color coded packages indicate line diameter.
Breaking
Part # Qty Description Length Color Strength Weight
LP2150 50/bx Power Saver™ Line Package for 1⁄2" conduit 150' Red 17 lbs .8 lb
LP3300 25/bx Power Saver™ Line Package for 3⁄4" conduit 300' Yellow 17 lbs .8 lb
LP3450 25/bx Power Saver™ Line Package for 3⁄4" conduit 450' Yellow 17 lbs .8 lb
LP4300 25/bx Power Saver™ Line Package for 1" conduit 300' White 17 lbs .8 lb
LP4450 25/bx Power Saver™ Line Package for 1" conduit 450' White 17 lbs .8 lb
Tag-Along™ Line Packages
For 11⁄4" to 6" conduit.
• Handles longer runs with less energy.
• Line is dispensed as package moves through conduit
attached to line carrier.
• Works with foam or inflatable line carriers.
Breaking
Part # Qty Description Length Strength Weight
LP2206T 10/bx Tag-Along™ Pull Line Package 400' 22 lbs .6 lb
LP2207T 10/bx Tag-Along™ Pull Line Package 800’ 22 lbs 1.1 lbs
LP2208T 10/bx Tag-Along™ Pull Line Package 600’ 22 lbs .9 lb
FC10 FC9
FC6
FC5 FC4
FC8
FC7
FC3 FC1
FC2
LP3450
LP3300
LP2150
LP4450
LP4300
LP2208T
LP2207T
LP2206T
Part # Qty Description Weight
FC1 10/bx Foam Line Carrier for 1⁄2" conduit .3 lb
FC2 10/bx Foam Line Carrier for 3⁄4" conduit .3 lb
FC3 10/bx Foam Line Carrier for 1" conduit .4 lb
FC4 10/bx Foam Line Carrier for 11⁄4" conduit .4 lb
FC5 5/bx Foam Line Carrier for 11⁄2" conduit .3 lb
FC6 5/bx Foam Line Carrier for 2" conduit .4 lb
FC7 5/bx Foam Line Carrier for 21⁄2" conduit .6 lb
FC8 5/bx Foam Line Carrier for 3" conduit .6 lb
FC9 2/bx Foam Line Carrier for 31⁄2" conduit .5 lb
FC10 2/bx Foam Line Carrier for 4" conduit .6 lb
FC11 2/bx Foam Line Carrier for 5" conduit .8 lb
FC12 2/bx Foam Line Carrier for 6" conduit .8 lb
FC11 & FC12 not pictured.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
73
Heavy-Duty Bulk Nylon Line
Doubles as general-purpose line for layout of suspended
ceilings, plumb-lines and masonry construction.
• Use with line carriers for any size conduit.
• All packages are center-dispensing (except #LP1707).
Breaking
Part # Qty Description Length Strength Weight
LP1701 6/bx Heavy-duty Bulk Nylon Line 1000' 100 lbs 2.5 lbs
LP1722 6/bx Heavy-duty Bulk Nylon Line 2200' 90 lbs 6.3 lbs
Poly-Pull™ Series Pull Line
Super high strength – up to 500 lbs breaking strength.
• Self-lubricated polyolefin line lasts for years; will not rust,
rot or mildew.
• Center-dispensing box pays out line smoothly.
• Blow directly into conduit using Dial-A-Line™ Seal-off bodies.
Conduit Measuring Tape
Blow or vacuum through the run to estimate wire length or to
locate obstructions.
• Strong and durable.
• Breaking strength of 165 lbs.
• Mildew and rot-resistant.
Part # Description Dimensions Weight
ST40 Super True Tape™ Measuring Tape 2750' Roll x 1⁄4" wide 3.6 lbs
LP1722
LP1701
Breaking Outside
Part # Description Length Strength Diameter Color Weight
PL102 Poly-Twine™ Pull Line 6500' 190 lbs 1⁄8" Yellow 13 lbs
PL102B Poly-Twine™ Pull Line in bucket 6500' 190 lbs 1⁄8" Yellow 14 lbs
PL232B Poly-Pull™ Line in bucket 6500' 210 lbs 1⁄8" Blue tracer 11 lbs
PL235 Poly-Pull™ Line in dispenser box 2200' 500 lbs 3⁄16" Red tracer 15 lbs
PL235B Poly-Pull™ Line in bucket 2200' 500 lbs 3⁄16" Red tracer 16 lbs
PL235
PL232B
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
74
UpperHand™ Fish Tape
GB’s series of UpperHand™ fish tapes has improved traditional hand fishing with
the first ergonomic fish tape in the industry. The improved design is manufactured
with impact-resistant ABS and Nylon™ resins and includes
a full, wrap-around interior ring to increase durability. The UpperHand™
series is backed by an industry leading 5-year limited warranty.
• Exclusive Ergonomic Handle reduces wrist strain.
• Exclusive Comfort Formed Grip reduces forearm strain.
• Exclusive cushioned Rubber Hand Grips for ease of
operation and comfort (certain models).
• Impact Modified Handle and Housing that exceeds
the 25 ft drop-test.
• Plated Steel Wire resists corrosion (certain models).
A Tape for Every Job
Standard Carbon Steel
Tried-and-true, tough and economical solution for wire pulling.
Corrosion-Resistant Plated Carbon Steel (R series)
The toughest, most durable tape for long-lasting use.
Non-Conductive Fiberglass Core with Nylon Jacket
Exclusive non-conductive tip and unique flat
shape is easier to feed yet able to pull
up to 500 lbs.
FTN-100R FTS-65R FTS-125R FTS-250R
Tape Length 100' 65' 125' 250'
Tape Material Fiberglass Core Corrosion-Resistant Plated Carbon Steel
w/ Nylon Jacket
Pkg Qty 1/card 1/card 1/card 1/card
Handle / Housing Material Nylon / ABS Nylon / ABS Nylon / ABS Nylon / ABS
w/ rubber grips w/ rubber grips w/ rubber grips w/ rubber grips
Tape Dimensions TBD TBD TBD TBD
Weight 2.99 lbs 3.0 lbs 5.2 lbs 8.2 lbs
Internal / External Ring Dia. 51⁄2" / 12" 4" / 81⁄2"5
1⁄2" / 12" 51⁄2" / 12"
SEE PG FOR MORE INFO ON
75 Fish Tape Winder
Ergonomic Handle
Reduces fatigue and wrist strain by allowing the
user to keep their wrist in a natural position
Warranty
Five Year
Drop Test Results
GB - UpperHand™
Competitive
Models
20'
15'
10'
5'
25'
Tested to withstand a
25''drop
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
75
UpperHand™ Rewind™ Fish Tape Winder
New UpperHand™ Rewind™ Fish Tape Winder GB’s new two-piece
winding solution that is easier to use than any other manual winding
system available. The Rewind™ works on all 100', 125' and 250'
UpperHand™ fish tapes.
• Designed exclusively for UpperHand™ fish tapes.
• Molded tabs Snap into the UpperHand™ housing to firmly secure.
• 3⁄8" Drive Socket fits standard ratchet.
• Over-molded Rubber Hand Grip on Ratchet.
improves operation and comfort.
• High-Impact ABS Construction withstands
drops of greater than 25'.
• Fits the following UpperHand™ Fish Tape models:
- FTS-125 - FTS-125R - FTS-250
- FTS-250R - FTN-100R
Attaches Easily
No tools are needed – just turn the handle and snap into place.
No other winder is as easy to use!
Reduces Strain/Improves Productivity
Efficient ratcheting feature saves arm movements –
and time on the job.
Keeps Tape Smooth
Easy, steady retrieval maintains tape’s original shape
for long-lasting use.
Part # Pkg Qty Description
FTW-10 1/card Rewind™ Fish Tape Winder
Cable Snake™ Steel Fish Tape
Rugged, ergonomically-designed steel fish tape.
• Comfortable handle made of impact-resistant plastic.
• Handle will not pop-out.
• Largest opening and gripping surface in the industry.
• GB exclusive trigger design cleans tape and provides
constant tension during retrieval.
• Tape is wound directly into housing. No need to “snap”
retaining tapes.
• Wire has clean lubricating properties to prevent rust.
• Maximum design strength 500 lbs.
• Fish tape ball helps guide through tricky bends.
• Patented.
Part # Description Weight
FTS-100GR 120' x 1⁄8" x .0625" Cable Snake™ 4.6 lbs
FTS-200GR 240' x 1⁄8" x .0625" Cable Snake™ 7.2 lbs
SEE PG FOR MORE INFO ON
74 UpperHand™
Fish Tapes
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
76
Part # Description End Type Reel Dia. Weight
FTS-50B 50' x 1⁄8" x .045" Fish Tape Curled 81⁄2" 2.3 lbs
Streamline™ Steel Fish Tape
Setting the industry standard for quality and dependability.
• Tape is wound directly into housing; no need to “snap”
retaining tapes; no sticky residue inside housing.
• Form-fitting finger grips around reel fit the hand comfortably.
• Shatter-proof reel stands up to on-the-job abuse.
• Four viewing ports on reel show how much tape remains.
• Easy disassembly for fast replacement of tape.
• Maximum design strength 500 lbs.
FTS-50B
EFT-21P
Part # Description Weight
EFT-21P 25' Cable Snake™ Fish Tape 1.10 lbs
Cable Snake™ Steel Fish Tape
Perfect for short runs installing electrical boxes, outlets,
lighting fixtures, doorbells and security systems.
• Compact design houses 25' of tape and fits in tool
box or on tool belt.
• Flat wire steel tape fishes down walls, under carpets
and over ceilings.
• Wedge-shaped tip prevents hang-up.
• Low-memory tape does not curl during extension -
perfect for non-conduit situations.
• Formed handle fits easily in hand.
• Compact tape rewind knob for quick wind-up.
Standard fish tape used
for conduit
High memory tape curls when
extended not allowing fishing
through walls
25' Cable Snake™
Low memory tape does not curl
when extended, making it ideal
for fishing overhead or
through walls
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
77
Fiberline™ Non-Conductive Fiberglass Fish Tape
For use in telecom, electrical, wall and floor conduit, walker duct
and utility installations.
• Fiberglass non-conductive properties for safer pushing/pulling
in occupied duct and panel boxes.
• Inner feed design for quick payout and rewind.
• Rust and corrosion resistant, superior pulling strength, will not kink.
• High visibility in crowded conduit.
• Fish tape eye accommodates #10 wire.
• Repair kit keeps parts handy.
• FiberLine™ Hand Puller protects fiberglass rod while pulling.
Works on most competitive fiberglass fish tapes.
• Maximum design strength 250 lbs.
Part # Description Weight
FTF-200 200' FiberLine™ w/ 3⁄16" rod 18 lbs
*FTRK-20 Repair Kit Available
FTF-200
Economy Fish Tape
Economical 50' tape.
• Standard steel material.
• View port in reel allows user to see amount of tape used.
Part # Description Reel Dia. Weight
EFT-50B 50' x 1⁄8" x .045" Fish Tape 7" 1.8 lbs
Replacement Fish Tape
Replacement tape FTS series.
• Durable flat steel tapes in 1⁄8" and 1⁄4" widths.
Part # Description Fits Housing Number Weight
RTS-50B 50' x 1⁄8" x .045" Steel FTS-50B 1.2 lbs
RTS-100 100' x 1⁄8" x .060" Steel FTS-100CE, FTS-100GR 3.0 lbs
RTS-200 200' x 1⁄8" x .060" Steel FTS-200CE, FTS-200GR 5.6 lbs
RTX-100 100' x 1⁄4" x .060" Steel FTX-100 5.8 lbs
RTX-200 200' x 1⁄4" x .060" Steel Bulk (no housing) 11 lbs
RTX-200
RTX-100
RTS-100
RTS-50B
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
78
Fish Tape Ball
Eye holds 7 #10, 12 #12 or 19 #14 bare wires.
• Attaches directly to most 1⁄8" x .0625" steel fish tapes.
• Maximum design strength 500 lbs.
Part # Description Weight
FTB-10 Fish Tape Ball .06 lb
Fish Tape Leader
Multi-Flex™ is a flexible, non-kink, round metallic leader perfect—for flat steel tapes.
• Double-sheathed to prevent unraveling. Brass plated for corrosion resistance.
• Spring Coil easily curves around bends, yet is rigid enough to fish smoothly through
conduit with existing wire.
• High strength – tested at 400 lb tensile strength.
• Attaches directly to 1⁄8" tapes, adapts to fit 1⁄4" tapes.
Part # Description Weight
FTL-5 Fish Tape Leader, Multi-Flex™ .5 lb
FTL-5
Nylo-Flex™ Non-Conductive Nylon Fish Tape
Non-conductive fish tape – light and flexible.
• Designed for use in conduit with existing wires
or cables.
• Glides through 1⁄2" to 4" conduit.
• High-strength nylon tape tested at 300 lbs average
tensile strength.
• Shatterproof reel is virtually indestructible; features
no-slip, form-fitting finger grips.
• Four viewing ports on reel show how much tape remains.
• 6-inch spiral wound metal leader with pulling eyelet
included (attached).
• Tape diameter is 3⁄16".
Part # Description Weight
NYD-50 50' Nylo-Flex™ Non-conductive Fish Tape Housing 1.2 lbs
NYD-100 100' Nylo-Flex™ Non-conductive Fish Tape Housing 2.2 lbs
JLP5 50' Non-conductive Replacement Tape (coil only) 1 lb
JLP10 100' Non-conductive Replacement Tape (coil only) 1.5 lbs
NYD-50
NYD-100
JLP5
JLP10
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
79
Fish Ease™ 12' Fish Sticks
• 3 durable interlocking fiberglass rods extend up to 12'.
(4' sections).
• 1⁄4" diameter ensures rigidity when extended.
• 2 different threading tips provided for a variety of applications.
Part # Description Dimensions Weight
FTX-12L Fish Ease™ 12' Fish Sticks 3 4' sections x 1⁄4" 1 lb
Glo Fish™ 15' Glow in the Dark Fish Sticks
• 3 interlocking fiberglass rods extend up to 15'.
• Made from luminescent fiberglass to make fishing through
walls or over ceilings easier.
• 1⁄4" diameter ensures rigidity when extended.
Part # Description Dimensions Weight
FTX-15GL Glo Fish™ 15' Fish Sticks 3 4' sections x 1⁄4" 1 lb
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
80
Stored Position (CP2000)
Mini-Brutus™ Cable Puller
Gardner Bender introduces the new
Mini Brutus™ 2,000 pound pulling
system. With the PT2000M power drive,
the CP2000M is an all-in-one light to
medium duty cable puller. When removed,
the power drive can also be used as a
pipe threader (adapters not provided).
Durable square tubular steel frame
construction prevents buckling and
the welded steel base improves
stability. Multi-position adjustable
arm increases versatility and allows
cable pulls from any direction.
Self-contained, compact design
sets up in minutes and is perfect for pulls
in small panels or tight locations.
• Rated for pulls up to 2,000 pounds.
• Self-contained design for quick setup and takedown.
• Adjustable arm fully extends to 70".
• Extended height to 9' 8" for convenience.
• 44" x 131⁄2" x 18" collapsible frame for portability and easy storage.
• 51⁄2" wheels to improve jobsite portability.
• Pulls loads up to 18' per minute to avoid wire installation damage.
• Two-part urethane baked-on paint to resist chipping and rust.
• Metal case provided for Power Drive and components.
Part # Description
CP2000 Mini-Brutus™ Cable Puller Frame
CP2000M Mini-Brutus™ Cable Puller w/ Motor & Components
PT2000M Power Drive Kit for CP2000 & CP2000M
Optional Power
Drive Shown
CP2000M Includes:
Part # Description
CP2000 Mini-Brutus™ Cable Puller Frame
PT2000M Power Drive Kit
PT2000M
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
81
Brutus™ Powered Puller
Pulls up to 8,000 lbs.
• Exclusive planetary gear design lets powerhead deliver
smooth, sure power without breakage.
• 30% more pulling force than competitors’ models.
• Versatile frame mounts power head almost anywhere.
• Frame assembles in numerous configurations.
• No chains or sprockets to break.
• Powerful 11⁄2hp motor starts under full load. Capstan is
non-reversing with backstop brake. Will not reverse when
power is shut off.
• Load read-out meter indicates pulling load at all times; alerts
operator to hung-up cable or other excessive conditions.
• Two-way power head mounting adapts to tight corners.
• Pulls 10 feet/minute without buckling or bending.
• Heavy-duty metal case included.
• Min 15 A, Max 30 A.
Typical concealed
conduit pull set up
Typical exposed
conduit pull set up
Part # Description Weight
CP8000 Brutus™ Powered Puller for exposed 355 lbs
or concealed conduit
Part # Qty Description Weight I.D. #
CP800 1 Power Head 60 lbs 1
CP503 3 2' Chain Assembly 3 lbs 4
CP505 5 8" Lock Pins 7 lbs 5
CP601 1 Conduit Frame Adapter 55 lbs 6
S-8512 3 12" Sheave 7 lbs 7
CP622 3 10" Lock Pins 3 lbs 8
CP631 1 Boom Extension 18 lbs 9
CP701 1 Puller Base Extension 25 lbs 10
CP702 1 Coupling Clamp 8 lbs 11
CP703 1 Adjustable Pipe Adapter 22 lbs 12
CP706 1 3" Conduit Coupling 5 lbs 13
CP707 1 31⁄2" Conduit Coupling 4 lbs 14
CP708 1 4" Conduit Coupling 3 lbs 15
CP709 1 6" Lock Pin 2 lbs 16
HS-8512 1 12" Cable Sheave with Hook 20 lbs 17
CM20 1 Metal Case with CM44 Casters 133 lbs 18
Part # Qty Description Weight I.D. #
CP800 1 Power Head 60 lbs 1
CP503 2 2' Chain Assembly 3 lbs 4
CP505 3 8" Lock Pins 7 lbs 5
CP601 1 Conduit Frame Adapter 55 lbs 6
S-8512 1 12" Sheave 7 lbs 7
CM20 1 Metal Case with CM44 Casters 133 lbs 18
Part # Qty Description Weight I.D. #
CP800 1 Power Head 60 lbs 1
CP80* 1 Floor Mount Kit (on following page) 33 lbs 3
CP8000
CP8000 Includes:
CP8000D Includes:
CP8001 Includes:
*Complete with 4
3
⁄
4
" x 5
1
⁄
2
" concrete wedge anchors.
13
14
15
1
12
11
7
18
7
9
5
8
10 4
6
16
17
CP8001
1
3
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
82
Brutus™ Powered Puller Sub-Assembly Kits
May be purchased as additions to existing cable-puller sets.
Part # Description Weight Part # Qty Description Weight I.D. #
CP800 Power Assembly 110 lbs CP801 1 Power Head 60 lbs 1
1 Base Mounting Bracket 50 lbs 2
CP80* Floor Mount Kit 33 lbs CP80 1 Floor Mount w/ Anchors 65 lbs 3
CP600 Conduit Frame & 72 lbs CP503 2 2' Chain Assembly 3 lbs 4
Sheave Adapter CP505 3 8" Lock Pins 7 lbs 5
Assembly CP601 1 Conduit Frame Adapter 55 lbs 6
S-8512 1 12" Sheave 7 lbs 7
CP630 Boom 22 lbs CP622 3 10" Lock Pins 3 lbs 8
Extension Kit CP631 1 Boom Extension 18 lbs 9
CP700 Puller Base 94 lbs CP503 1 2' Chain Assembly 3 lbs 10
Extension Kit CP505 2 8" Lock Pins 7 lbs 11
S-8512 1 12" Sheave 7 lbs 12
CP701 1 Puller Base Extension 25 lbs 13
CP702 1 Coupling Clam 8 lbs 14
CP703 1 Adjustable Pipe Adapter 22 lbs 15
CP706 1 3" Conduit Coupling 5 lbs 16
CP707 1 31⁄2" Conduit Coupling 4 lbs 17
CP708 1 4" Conduit Coupling 3 lbs 18
*Complete with 4
3
⁄
4
" x 5
1
⁄
2
" concrete wedge anchors.
CP700
CP630 CP600
CP80
CP800
1
2
3
6
5
4
7
8
9
13
15
11
14
16
18
17
10
12
Part # Description Weight I.D. #
CP709 6" Lock Pin 2 lbs 1
CP1002 Rope Steel Stand (For 300' Rope) 12 lbs 2
HS-8512 12" Cable Sheave with Hook 20 lbs 3
CM16 Metal Case with CM 44 Casters 133 lbs –
RST-7530 Double Braided Rope (3⁄4" x 300' spool) 54 lbs –
RST-7560 Double Braided Rope (3⁄4" x 600' spool) 109 lbs –
CP10 Load Readout (meter only CA1064001) 3 lbs 4
CP15 Foot Switch for Remote Operation 4 lbs 5
CP504 6' Chain Assembly 6 lbs 6
CP704 2" Conduit Coupling 7 lbs 7
CP705 21⁄2" Conduit Coupling 6 lbs 8
CP806 Capstan (standard) 10'/min. 7 lbs –
CP807 Capstan (large diameter) 12'/min. 11 lbs 9
Optional Equipment
May be purchased as additions to existing cable-puller sets. 6
5
4
8
7
9
3
2
1
SEE PG FOR MORE INFO ON
88 Rope
For maximum
performance and safety,
use only original GB rope.
tip:
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
83
Brutus™ Application Instructions
3
4 5 6
7
8
9
Puller suspended using horizontal pull
Puller suspended using vertical pull Vertical–pulling up Underground pulling
Conduit frame adapter with sheave
chained to exposed conduit
Power head assembly being attached
to conduit frame adapter using two
lock pins
Pulling up cable with conduit frame
adapter chained to exposed conduit –
mounted flush
1
2
Different positions Pulling horizontally
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
84
10
Conduit frame adapter chained to
conduit (over the extension resting
on floor) pulling down
Coupling threaded onto conduit.
Coupling clamp locked to coupling
with two thumb screws
12
13
14
15
16
17
18
Conduit frame adapter resting on
floor and on back of box – pulling up
Conduit frame adapter chained to
exposed conduit – pulling down
Downward pull – conduit frame
adapter chained to conduit extension
Upward pull – conduit frame adapter
chained to conduit extension
Conduit frame adapter chained to
conduit – pulling up
Resting conduit frame adapter on
floor over conduit and pulling up
Power head assembly chained to 6"
conduit with two 90° bends pulling
from underground conduit using cable
sheave with hook
Brutus™ Application Instructions
11
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
85
Brutus™ Application Instructions
Resting conduit frame adapter on floor
and blocks over conduit and pulling up
Pulling additional cable from junction
box (1) down to junction box (2) using
cable sheave with hook and power
head assembly chained to pole
21
22 23 24
25
Conduit frame adapter chained to
conduit extension in pull box – pulling
vertically from underground
Use boom extension to obtain
extra cable length for splicing
Conduit frame adapter and power head
assembly chained to conduit (over
extension) pulling down from box on ceiling
Pulling from 90° connector to obtain
leads long enough to complete
connection in junction box
Conduit frame adapter and power
head assembly chained separately
to conduit, pulling from a ceiling pull
box for additional cable
2019
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
86
Hook Sheaves
Suspends cable overhead and reduces strain on pulling equipment.
• Keeps cable together for easier manageability and enables
direction of cable to be changed.
• Sheave made of rugged aluminum alloy. Hook frame made
of welded steel.
• Rated at 8,000-lb capacity.
Part # Description Width Dia. Weight Hook Only Weight Sheave Only Weight
HS-8512 Hook Sheave 5" 12" 20 lbs H-8512 13 lbs S-8512 7 lbs
HS-8518 Hook Sheave 5" 18" 30 lbs H-8518 20 lbs S-8518 10 lbs
HS-8524 Hook Sheave 5" 24" 43 lbs H-8524 29 lbs S-8524 14 lbs
Wire & Cable-Pulling Tension Meter
Monitors tension throughout the pull to prevent over-stressing
cable. Perfect for use with powered pullers.
• Self-contained hydraulically-operated meter measures in
200-lb increments up to 10,000 lbs maximum capacity.
• Maximum-indicating pointer helps read
pre-selected loads.
• ± 2% accuracy.
• Comes with certificate of calibration.
• Minimum Reading 1,000 lbs; Increments 200 lbs.
Part # Description Capacity A B C D E F G Weight
TM5 Tension Meter 10,000 lbs 4.75" 9.75" 9.29" 2.00" 3.69" .88" .75" 9 lbs
Wire-Aide™ Wire-Pulling Lubricant
Slides on smoothly and clings throughout the pull. Modified
wax-base formula dries to a slippery film.
• Greaseless, non-toxic compound will not stain skin, clothing
or construction trim; cleans up quickly with soap and water.
• Stable and safe to use. Withstands normal temperature
extremes and will not dry out in the container.
Non-combustible, non-conductive and non-corrosive.
• Will not damage conduit or insulation.
• Remains stable with multiple freeze-thaw cycles.
• Suitable for fiber-optic wire.
Part # Container Size Weight
79-002 1 gal. Pail 9 lbs
79-003 5 gal. Pail 42 lbs
79-006 1 qt. Squeeze Bottle 2 lbs
GF
A
D
1/2"-13UNC
C
B
E
5/8"-11UNC
HS-8512 HS-8518 HS-8524
79-003
79-002
Wire-Aide™ Specifications
Base Wax, modified
Color Yellow
Viscosity Heavy cream-like paste
pH Approx. 6.5 - 7.0
Freezing Point 28° F
Freeze-Thaw Stability OK/3 cycles
Lubricity Excellent
Shelf Life Indefinite
Corrosion Test Non-corrosive to metals
Staining Properties Non-staining to hard surfaces
Removal Soap and hot water
Abrasion Protection Excellent
Cling Ability Excellent
Water Resistance Repels water to some extent
Hardening Charac. Non-hardening
Condition on Drying Waxy-film
Flash Point Non-combustible
79-006
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
87
Poly-Gel™ Cable-Pulling Lubricant
Perfect for all types of insulation and conduit, including fiber-optic
cable, cable with low-density, linear low-density polyethylene,
polyurethane and semi-conducting jackets.
• Clean, clear gel, water-based for easy cleanup.
Non-staining and non-toxic.
• Dries to a clear, non-conductive film for easy handling,
stripping and terminating of cable. Will not gum up
or harden on conduit.
• Easy and versatile to use. Apply manually or with pump.
• Workable over wide temperature range:
- Poly-Gel™ +28 °F to +200 °F
- All Season Poly-Gel™ -10 °F to +180 °F
Part # Description Container Size Weight
79-201 Poly-Gel™ 1 qt. Squeeze Bottle 2.5 lbs
79-202 Poly-Gel™ 1 gal. Pail 8.75 lbs
79-203 Poly-Gel™ 5 gal. Pail 42 lbs
79-301 All Season Poly-Gel™ 1 qt. Squeeze Bottle 2.5 lbs
79-201
79-203
79-202
Poly-Gel™ Specifications
Base Poly-oxyethylene/Water
Color Blue
Viscosity Thick Clear Gel
pH 7.2 - 8.2
Freezing Point 28 °F
Freeze-Thaw Stability Excellent
Lubricity Excellent
Shelf Life Indefinite
Corrosion Test Non-corrosive
Staining Properties Non-staining
Removal Soap and water
Cling Ability Excellent
Condition on Drying Semi-fluid film
Flash Point Non-combustible
All Season Poly-Gel™ Specifications
Base Polyethylene polymer
Color Lime Green
Viscosity Heavy gel-like paste
pH Approx. 6.5 - 7.5
Freezing Point -10 °F
Freeze-Thaw Stability OK/3 cycles
Lubricity Excellent
Shelf Life Indefinite
Corrosion Test Non-corrosive to metals
Staining Properties Non-staining to hard surfaces
Removal Soap and Water
Cling Ability Excellent
Condition on Drying Lubricious film
Flash Point Non-combustible
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
88
Super-Slick™ Cable-Pulling Lubricant
Exclusive GB Micro Bead Formula rolls cable through the
longest pulls.
• Lowest pulling tension. This GB lubricant innovation combines
a lubricating agent with microbeads that act as miniature ball
bearings to raise the cable off the conduit surface. Cable
literally rolls through the run, reducing friction by an additional
30% compared to regular lubricants.
• Adheres throughout long pulls. Creates a slick film that will not
rub off or dry out on long pulls or re-pulls.
• Requires up to 45% less lubricant per foot than regular
lubricants, actually reducing cable-pulling costs.
• Stable under temperature extremes of 28 °F to 200 °F and
withstands repeated freeze-thaw cycles.
• Harmless to skin and safe for the environment. Non-toxic, non-
flammable and non-corrosive to all conduit types. Easily cleans
up with water and will not stain clothing.
• Universally compatible with all cable types and jacket materials,
including low-density and linear low density polyethylene,
polyurethane and semi-conducting jackets.
Part # Container Size Weight
79-401 1 qt. Squeeze Bottle 2.5 lbs
79-402 1 gal. Jug 8.75 lbs
79-403 5 gal. Pail 42 lbs
Super Slick™ Specifications
Base Water
Color White
Viscosity 2100 cps@ 50 rpm
pH 6.0 - 8.0
Freezing Point 30.2 °F
Freeze-Thaw Stability Excellent
Lubricity Excellent
Shelf Life Indefinite
1. Micro Beads
2. Shear-sensitive carrying agent
with suspended lubricating oil
3. Cable
4. Thin film of lubricating oil
5. Conduit wall
1
2
3
4
5
79-401
79-403
79-402
Staining Properties Non-staining
Removal Water Rinse
Abrasion Protection Excellent
Cling Ability Excellent
Hardening Charac. Non-Hardening
Condition on Drying Slick Film
Flash Point Non-Combustible
Super Tuff-Pull™ Double Braided Rope
The toughest, strongest pulling rope available.
Double-braided 100% polyester construction, delivers
the highest working loads and tensile strength at
every diameter.
• Super abrasion resistance for longer life.
• Low stretch, high strength characteristics result from
exclusive manufacturing process which carefully
controls yarn tension during braiding. Torque-free,
non-rotating, non-kinking performance due to
double-braided construction for ease of handling — wet or dry.
• Weather resistant. Will not rot or mildew.
• The 3⁄4" diameter rope includes a factory-spliced eye on both ends.
Part # Size Working Load* Weight
RST-5030 1⁄2" x 300' 3,500 lbs 30 lbs
RST-5060 1⁄2" x 600' 3,500 lbs 61 lbs
RST-7530** 3⁄4" x 300' 8,000 lbs 54 lbs
RST-7560** 3⁄4" x 600' 8,000 lbs 109 lbs
* Working loads are based on use with GB Cable Pullers and
for the purpose of pulling wire through conduit.
** Preferred for Brutus™ 8,000-lb Cable Puller.
Super Tuff-Pull™ is constructed of
a jacket braided over a braided
core. Double braided construction
entirely shields one of the two
ropes from abrasion.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
89
Tuff-Pull™ Single Braided Rope
Toughest, strongest single-braided rope available.
Constructed of 12 strands of 100% polyester fibers
braided over and under each other in a circular pattern.
• Non-rotating, non-kinking performance due to braided
construction (unlike ordinary twisted rope) makes
handling easy.
• Low stretch, high strength characteristics result from
tension-controlled braiding process.
• Weather-resistant. Will not rot or mildew.
• The 3⁄4" diameter rope includes a factory-spliced eye on both ends.
Part # Size Working Load Weight
RTP-3830 3⁄8" x 300' 1125 lbs 14 lbs
RTP-5030 1⁄2" x 300' 2125 lbs 21 lbs
RTP-7530 3⁄4" x 300' 4500 lbs 58 lbs
Tuff-Pull™ is constructed of
12 strands of polyfibers braided
over and under each other in a
circular direction.
Vary rope application.
Reverse the rope,
end-for-end. Alternate the lay of the
rope around capstan and sheaves.
Store rope in clean dry area,
preferably on well-ventilated racks.
Keep rope away from chemical
contact or fumes.
Avoid exposing rope to extreme
heat in excess of 140 °F.
tip:
Poly-Pro™ General Purpose Rope
Strong, durable, lightweight polypropylene general purpose rope
for manual wire pulling and general construction applications
(barrier rope, tie downs, tow rope, etc.).
• Resistant to mildew, rot and chemical action.
Part # Size Working Load Weight
RGP-2525 1⁄4" x 250' 113 lbs 4 lbs
RGP-2560 1⁄4" x 600' 113 lbs 9 lbs
RGP-3825 3⁄8" x 250' 270 lbs 10 lbs
RGP-3860 3⁄8" x 600' 270 lbs 23 lbs
RGP-5025 1⁄2" x 250' 420 lbs 18 lbs
RGP-5060 1⁄2" x 600' 420 lbs 37 lbs
RGP-50120 1⁄2" x 1200' 420 lbs 66 lbs
RGP-7530 3⁄4" x 300' 1100 lbs 44 lbs
RGP-7560 3⁄4" x 600' 1100 lbs 81 lbs
!WARNING
Not recommended for
powered cable pulling.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
90
Rope Selection
1. Select the proper rope for the job.
a. Working Load Rating represents the maximum
pulling load to which the rope should be
subjected. It increases with rope diameter and
is calculated for rope in good condition with
appropriate splices under normal service.
Note: Working load guidelines are void under
conditions of rapid or sudden load changes.
b. Tensile Strength is the average breaking point
of new, unused rope. It gives some indication of
the rope’s ability to withstand sudden or shock
loads. Tensile strength decreases over time as
the rope is used and should
not
be relied upon
as an indication of working strength.
2. Inspect the rope thoroughly before each use.
Rope Usage
1. Always check all fittings, splices, connectors,
etc. before using rope.
2. Do not stand directly in line with rope
under tension.
3. Do not overload the rope.
4. Avoid abrasive conditions.
Strength
Super Tuff-Pull™ & Tuff-Pull™
Poly-Pro™
All synthetic rope under load will recoil if it, or a
fitting (chain, hook, bolt, etc.) fails. The snap-back
action will propel the rope - and any still attached
metal fittings – at high speed. Serious injury to
persons or property in the vicinity is possible.
Line of Pull
Danger Zone
Danger Zone
Elasticity
Always choose a strong, durable rope with limited
elasticity and long service life. The material, tensile
strength and recommended working load are
critical factors.
Polyester ropes such as Tuff-Pull™
and Super Tuff-Pull™ are preferred
for cable pulling because of their low
elasticity, high strength and endurance.
tip:
Super Tuff-Pull™ & Tuff-Pull™
Poly-Pro™
Avoid using rope that shows signs of wear, such
as frayed ends, broken yarns or pulled strands.
!WARNING
Handle loads slowly and smoothly to avoid sudden
strains or shock loads which can exceed the rope’s
breaking strength. Such dynamic loading occurs when
a load is picked up, stopped, moved or swung and may
subject the rope to two or three times its normal
working load.
Rough surfaces and sharp edges can severely
damage rope. Do not pull rope over sharp bends
or angles. Make sure chocks, capstans, sheaves
and pulleys are free of burrs and rust and rotate
freely. Keep rope surface clean. Do not drag it over
rough ground; dirt and grit will work into and cut
inner fibers.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
91
Handy-Saver™ Reel Roller
Durable roller base that permits fast, easy loading and re-loading.
• 3000 lb capacity per pair.
• Slanted ramp permits fast, easy loading and unloading.
• Five roller slot adjustments set for wide range of reel diameters;
no limit on reel widths.
• Epoxy-coated solid steel platform withstands heavy use.
• For 15" to 30" diameter reels.
• Dimensions: 26"L x 111⁄4"W x 41⁄2"H.
Part # Description Weight
WRR-100 Handy Saver™ Reel Roller (1 ea.) 48 lbs
30" Reel Roller
Holds reels up to 30" diameter; 2000 lb capacity.
• Five roller slot adjustments to fit reel diameter.
• Epoxy-coated solid steel platform with handy loading/
unloading ramp.
• Dimensions: 331⁄2"L x 261⁄2"W x 41⁄2"H.
Part # Description Weight
WRR-300 30" Reel Roller 50 lbs
Telescoping Reel Jacks
Easily set up in minutes to dispense or take up wire, cable, rope or hose.
• Adjustable jack height accommodates various reel sizes.
• Roller bearings on jack permit smooth reel rotation.
• High-strength steel construction holds up to 5000-lb reel.
Jack Height Reel Capacity
Part # Dimensions Range Size Weight Weight
TRJ-56 141⁄2"L x 15"W 13" to 28" 28" to 56" 2500 lbs. (ea.) 25 lbs
TRJ-96 24"L x 16"W 22" to 54" 46" to 96" 2500 lbs. (ea.) 49 lbs
Insert spindle through
center of reel.
Place reel jacks under
each end of spindle,
aligning roller bearings
with spindle grooves,
and raise one jack until
reel end clears floor.
Raise opposite jack
until spindle is level.
Part # Description Weight
WRR100259 Side Roller 1 lb
WRR1002513 Cotter Pin .5 lb
Replacement Parts
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
92
Hand Wire Caddy
Convenient hand carrying or dispensing of small quantities of
reeled wire.
• Rugged construction from 5⁄8", .083 steel tubing, epoxy-coated
to reduce chipping and peeling.
• Holds up to eight reels, each 7" diameter by 5" wide, or four reels,
each 7" diameter by 6" to 10" wide.
Part # Description Dimensions Weight
WSP-100E Hand Caddy 221⁄2" L x 131⁄2" W x 91⁄2" H 6 lbs
Portable Wire Caddy
Maximum flexibility to dispense six 500' spools of #6 to #10
AWG or twelve 7" diameter by 5" wide wire reels at the
same time.
• Durable welded square-tube steel frame to stand up to tough
job-site applications.
• WSP-115 model comes with wire guide and casters.
Part # Description Dimensions Weight
WSP-115 Wire Caddy with Casters 16" L x 26" W x 201⁄2" H 8 lbs WSP-115
Spool Caddy Cart
Transport and dispense reels of building wire, coaxial and
multi-conductor cables.
• Hand Caddy WSP-100E is included. The caddy is easily
attached to and detached from cart for maximum capacity
and flexibility.
• Constructed of heavy-duty, steel tubing holds up to 300 lbs.
• Semi-pneumatic steel wheels are much more durable than
plastic wheels.
• Special patented channel allows up to two hand caddies to
attach to cart.
Part # Description Dimensions Weight
WSP-140 Spool Caddy w/ WSP-100E 22" L x 16" W x 43" H 27 lbs
WSP-140 Assembled
WSP-140
Unassembled
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
93
Deluxe Spool Cart & Caddy Combo
WSP-145 combines Deluxe Spool Cart (WSP-144) and
Hand Caddy (WSP-100) for maximum capacity and
flexibility in storing and transporting wire reels.
• Hand Caddy is easily attached to and detached from cart
using special, patented channel.
• Holds up to 23 500' spools or two 2,500' spools.
• Constructed of heavy-duty steel tubing holds up to 400 lbs.
Durable semi-pneumatic wheels.
• WSP-144 offers five spool holders that attach in six
positions to hold reel/spool combinations:
- Ten - 23 reels, each 5" - 7" diameter and 5" - 10" wide
- Four reels, each 10" - 12" diameter, 7" wide
- Two reels, each 15" - 18" diameter, 14" wide
Part # Description Dimensions Weight
WSP-144 Deluxe Spool Caddy 22" L x 181⁄2" W x 43" H 28 lbs
WSP-144
Heavy-Duty Spool Cart & Caddy
Expander Combo
WSP-155 combines Heavy-Duty Spool Cart (WSP-150)
and Heavy-Duty Caddy Expander (WSP-50) for storing
and transporting up to 21 500' spools or four 2,500' spools.
• Constructed of heavy-duty steel tubing, holds up to 700 lbs.
• Shock-absorbing, semi-pneumatic wheels mounted on
ball bearing steel rims with easy-service grease fittings.
• Dispenses THHN, THW, Romex®and other materials
from horizontal or vertical position.
• Two wire guide feeders permit wire feed in
any direction.
• WSP-150 has a versatile carrying capacity. Holds
four reels each 10" diameter x 15" wide, or three
reels, each 12" - 14" diameter, or two reels each
12" - 15" diameter x 15" wide or one 24" diameter
reel 15" wide.
WSP-150
Part # Description Dimensions Weight
WSP-150 Heavy-Duty Spool Caddy 22" L x 181⁄2" W x 45" H 60 lbs
Romex®is a registered trademark of Southwire Company, Carrollton, GA
Wire Dispenser
Capacity to handle ten 2500' spools up to 18" diameter.
• Swivels a full 360° on the base.
• All-steel construction.
• Base has two fixed and two swivel locking casters.
• Spindles are mounted at an angle to keep wire reels in proper
payout position.
• Easily rolls through standard 36" door opening.
Part # Description Dimensions Weight
WCM-10 Wire Dispenser 363⁄8" L x 313⁄8" W x 591⁄4" H 155 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
94
Wire Caddy Replacement Parts
• Replacement parts for Gardner Bender wire caddies.
Part # Description For Wire Cart: Qty Weight
WSP144050 Spool Caddy Bars 18" L WSP-144, WSP-140 5 1.5 lbs
WSP144010 Hex Head Bolt WSP-144 2 .5 lb
WSP144251 R-Clips All Caddies 10 .5 lb
WSP144253 Wheels WSP-144 2 5 lbs
WSP144254 Axle Caps WSP-144 2 .5 lb
WSP1502517 Spool Caddy Bars 20" L WSP-150, WSP-155 1 4 lbs
WSP144050
WSP144251 WSP144253
Portable Wire Dispenser
• Unique patented design makes carrying boxed or coiled wire easy.
Dispenser spins wire straight and flat.
• Adjustable flexible legs fit all sizes of wire coils or boxes.
• Stores coils up to 50 lbs or 250' Romex®.
Part # Description Dimensions Weight
740 Portable Wire Dispenser 175⁄8" Dia; 131⁄2" H 4 lbs
HOLE MAKING
98
101
103
106
107
From single parts to complete kits,
Gardner Bender has versatile, durable
hole-making products that contractors
depend on.
95
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
96
Slug-Out™ Knockouts
35 Ton Hydraulic Punch . . . . . . . . . . . . .102
Draw Studs . . . . . . . . . . . . . . . . . . .104-105
Hydraulic Slug-Out™ Sets . . . . . . . . . .97-98
Individual Components . . . . . .101, 104-105
Mechanical Slug-Out™ Sets . . . . . . .99-100
Notching Pliers . . . . . . . . . . . . . . . . . . . .102
Super Stainless Steel
Slug-Out™ Sets . . . . . . . . . . . . .103, 106
Stud Punch . . . . . . . . . . . . . . . . . . . . . . . .106
Step Bits . . . . . . . . . . . . . . . . . . . . . . . . . .107
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
97
* Must be used with
1
⁄
2
" punch and die. ** Must be used with 3
1
⁄
2
" - 4" punch and die.
Part # Description Hole Weight I.D. #
PH20 Hand Pump - 2 speed – 5 lbs 22
KPR7540 Drawstud for 3
⁄4" - 4" Punches & Dies – 2.5 lbs 23
KPS50* Stainless Steel Pull Rod, 3⁄8" dia. – .2 lb 24
KC3540** Converter – .4 lb 25
Part # Description Hole Weight I.D. #
CH1211 12-ton Hydraulic Cylinder – 6 lbs 26
H864 6' Rubber Hose Coupler – 2 lbs 27
CM5 Metal Case – 11 lbs 28
KOH14A Set Includes:
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 9
KD1500B 11⁄2" Die 115⁄16" 2 lbs 10
Part # Description Hole Weight I.D. #
KP2000B 2" Punch 23⁄8" 2 lbs 11
KD2000B 2" Die 23⁄8" 2 lbs 12
PF65 Foot Pump
(KOF520 only)
– 12 lbs 21
PH20 Hand Pump - 2 speed
(KOH520A only)
– 5 lbs 22
KPR7540 Drawstud for 3
⁄4" - 4" Punches & Dies – 2.5 lbs 23
KPS50* Stainless Steel Drawstud, 3⁄8" dia. – .2 lb 24
KC3540** Converter – .4 lb 25
CH1211 12-ton Hydraulic Cylinder – 6 lbs 26
H864 6' Rubber Hose Coupler – 2 lbs 27
CM5 Metal Case – 11 lbs 28
KOF520 & KOH520A Sets Include:
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 9
KD1500B 11⁄2" Die 115⁄16" 2 lbs 10
KP2000B 2" Punch 23⁄8" 2 lbs 11
KD2000B 2" Die 23⁄8" 2 lbs 12
KP2500 21⁄2" Punch 27⁄8" 3 lbs 13
KD2500 21⁄2" Die 27⁄8" 3 lbs 14
Part # Description Hole Weight I.D. #
KP3000 3" Punch 31⁄2" 4 lbs 15
KD3000 3" Die 31⁄2" 4 lbs 16
KP3500 31⁄2" Punch 4" 4 lbs 17
KD3500 31⁄2" Die 4" 4 lbs 18
KP4000 4" Punch 41⁄2" 4 lbs 19
KD4000 4" Die 41⁄2" 4 lbs 20
PF65 Foot Pump
(KOF540 only)
– 12 lbs 21
PH20 Hand Pump - 2 speed
(KOH540A only)
– 5 lbs 22
KPR7540 Drawstud for 3
⁄4" - 4" Punches & Dies – 2.5 lbs 23
KPS50* Stainless Steel Drawstud, 3⁄8" dia. – .2 lb 24
KC3540** Converter – .4 lb 25
CH1211 12-ton Hydraulic Cylinder – 6 lbs 26
H864 6' Rubber Hose Coupler – 2 lbs 27
CM5 Metal Case – 11 lbs 28
KOF540 & KOH540A Sets Include:
1&2
3&4
5&6
7&8
9&10
11&12
19&20 17&18 15&16 13&14
21
22
28
24
23
25
26
27
27
Slug-Out™ Hydraulic Knockout Sets
Punches holes for 1⁄2" to 4" conduit in distribution boxes,
electrical panels or troughs.
• Four point design allows slug to drop automatically
without splitting.
• Punches up to 10-gauge mild steel and 12-gauge
stainless steel.
• Hand or foot operation; choose hand or foot-powered
hydraulic pump.
• Assortment of punches, dies and accessories.
• Includes metal storage case (111⁄8" x 183⁄4" x 61⁄4").
• Competitors’ punches and dies are interchangeable.
Part # Description Weight
KOH14A Hydraulic Slug-Out™ Set w/o punches and dies and with PH20 Hand Pump 27 lbs
KOF520 1⁄2" - 2" Hydraulic Slug-Out™ Set with PF65 Foot Pump 40 lbs
KOH520A 1⁄2" - 2" Hydraulic Slug-Out™ Set with PH20 Hand Pump 31 lbs
KOF540 1⁄2" - 4" Hydraulic Slug-Out™ Set with PF65 Foot Pump 59 lbs
KOH540A 1⁄2" - 4" Hydraulic Slug-Out™ Set with PH20 Hand Pump 50 lbs
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
98
Slug-Out 90™
1⁄2" to 2" conduit size.
• Right-angle head swivels 360° for
flexible punching in tight work spaces.
• Punches up to 21⁄2" conduit sizes,
up to 10-gauge mild steel and
12-gauge stainless steel.
• No cumbersome “spacers” required.
• Compact, lightweight size: 71⁄2pounds and 13" in length.
• Operating pressure rated at 10,000 psi.
• Set includes the most popular draw studs, punches, and
dies for punching holes for 1⁄2" to 2" conduit all packed in a
sturdy storage case.
Part # Description Weight
KOS5290 Self-contained Hydraulic Slug-Out 90™ Set 15 lbs
Seal Repair Kit KLP6K1
Slug-Out™ Self-Contained Hydraulic Knockout Set
1⁄2" to 2" conduit size.
• Hydraulic driver punches up to 10-gauge mild steel and
up to 12-gauge stainless steel.
• Four-point design allows slug to drop automatically
without splitting.
• Lightweight and easy to use.
• Hydraulic driver operates in any position.
Optional 21⁄2" and 3" punch and die available.
Part # Description Weight
KOS520 Slug-Out™ Self-contained Hydraulic Set 14 lbs
11&12
15
16
14
13
5&6
9&10
1&2
7&8
3&4
11&12
15
16
14
13
9&10
1&2
7&8
3&4 5&6
1&2
17
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
Part # Description Hole Weight I.D. #
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 9
KD1500B 11⁄2" Die 115⁄16" 2 lbs 10
KP2000B 2" Punch 23⁄8" 2 lbs 11
KD2000B 2" Die 23⁄8" 2 lbs 12
KLP6 Hydraulic Driver – 10 lbs 13
KPR7520 Drawstud – 1 lb 14
KPS50 Drawstud – .2 lb 15
KSA50 Drawstud Adapter – .3 lb 16
Set Includes:
Seal Repair Kit KLP2K1
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 9
Part # Description Hole Weight I.D. #
KD1500B 11⁄2" Die 115⁄16" 2 lbs 10
KP2000B 2" Punch 23⁄8" 2 lbs 11
KD2000B 2" Die 23⁄8" 2 lbs 12
KLP2 Hydraulic Driver – 10 lbs 13
KPR7520 Drawstud – 1 lb 14
KPS50 Drawstud – .2 lb 15
KSA50 Drawstud Adapter – .3 lb 16
K88020 Metal Storage Case – 4.1 lbs 17
Set Includes:
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
99
Quick Hand Ratchet Slug-Out™
1⁄2" to 2" conduit size.
• Four-point design allows slug
to drop automatically
without splitting.
• Smooth operating ratchet
handles up to 10-gauge
mild steel and 12-gauge
stainless steel.
Part # Description Weight
KOR520 Slug-Out™ Ratchet Set 16 lbs
KOR14 Ratchet (without punch and dies) 12 lbs
Slug-Out™ Set With Ratchet Wrench
1⁄2" to 2" conduit size.
• Four-point design allows slug to drop automatically
without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Set includes ratchet wrench, six sizes of punches and
dies, and two drive screws all packaged in a rugged
storage case.
Part # Description Weight
KOW520 Mechanical Slug-Out™ Set w/ KW52 Wrench 12 lbs
11&12
15
16
14
13
9&10
7&8
3&4
5&6
1&2
17
11&12
15
16
14
13
9&10
3&4
5&6
1&2 7
8
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 9
Part # Description Hole Weight I.D. #
KD1500B 11⁄2" Die 115⁄16" 2 lbs 10
KP2000B 2" Punch 23⁄8" 2 lbs 11
KD2000B 2" Die 23⁄8" 2 lbs 12
KOR14 Ratchet – 12 lbs 13
KOR50 1⁄2" Screw Adapter – .4 lb 14
KOR75125 3⁄4" - 11⁄4" Screw Adapter – 1 lb 15
KOR152 11⁄2" - 2" Screw Adapter – 1 lb 16
K88020 Metal Storage Case – 4 lbs 17
KOR520 Set Includes:
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
Part # Description Hole Weight I.D. #
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 9
KD1500B 11⁄2" Die 115⁄16" 2 lbs 10
KP2000B 2" Punch 23⁄8" 2 lbs 11
KD2000B 2" Die 23⁄8" 2 lbs 12
KW52 Hand Ratchet Wrench – 1 lb 13
KSB50B 1⁄2" Bearing & Drive Screw – 1 lb 14
KS752B 3⁄4" - 2" Bearing & Drive Screw – 1 lb 15
K88007 Storage Case – 1.5 lbs 16
Set Includes:
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
100
Slug-Out™ Set for 1/2" to 11⁄4" conduit size
Four-point design allows slug to drop automatically without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Set includes the four most popular sizes of punches and dies
packed in a sturdy storage case.
Part # Description Weight
KOM50125 Mechanical Slug-Out™ Set 3 lbs
Slug-Out™ Set for 11⁄2" to 2" conduit size
Four-point design allows slug to drop automatically without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Durable storage case.
Part # Description Weight
KOM152 Mechanical Slug-Out™ Set 4 lbs
11
9
4
5&6
1&2
3
10
6
5
2
1
3&4
Slug-Out™ Assortment Kit for 21⁄2" to 4" conduit size
Expand capability of 1⁄2" - 2" sets.
• Four-point design allows slug to drop automatically without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
• Packed in metal storage case.
Part # Description Weight
KOH2540 Slug-Out™ Set in Metal Case 22 lbs
7&8
9
7&8 5&6
21
3&4
Part # Description Hole Weight I.D. #
KP500B 1⁄2" Punch 7⁄8".4 lb 1
KD500B 1⁄2" Die 7⁄8"1 lb 2
KP750B 3⁄4" Punch 13⁄32".4 lb 3
KD750B 3⁄4" Die 13⁄32"1 lb 4
KP1000B 1" Punch 111⁄32"1 lb 5
KD1000B 1" Die 111⁄32"1 lb 6
Part # Description Hole Weight I.D. #
KP1250B 11⁄4" Punch 111⁄16" 2 lbs 7
KD1250B 11⁄4" Die 111⁄16" 2 lbs 8
KSB50B 1⁄2" Bearing & Drive Screw – 1 lb 9
KS752B 3⁄4" - 2" Bearing & Drive Screw – 1 lb 10
K88004 Storage Case – 1.5 lbs 11
Set Includes:
Part # Description Hole Weight I.D. #
KP1500B 11⁄2" Punch 115⁄16" 2 lbs 1
KD1500B 11⁄2" Die 115⁄16" 2 lbs 2
KP2000B 2" Punch 23⁄8" 2 lbs 3
Part # Description Hole Weight I.D. #
KD2000B 2" Die 23⁄8" 2 lbs 4
KS752B 3⁄4" - 2" Bearing & Drive Screw – 1 lb 5
K88001 Storage Case – 1.5 lbs 6
Set Includes:
Part # Description Hole Weight I.D. #
KP2500 21⁄2" Punch 27⁄8" 3 lbs 1
KD2500 21⁄2" Die 27⁄8" 3 lbs 2
KP3000 3" Punch 31⁄2" 4 lbs 3
KD3000 3" Die 31⁄2" 4 lbs 4
KP3500 31⁄2" Punch 4" 4 lbs 5
Part # Description Hole Weight I.D. #
KD3500 31⁄2" Die 4" 4 lbs 6
KP4000 4" Punch 41⁄2" 4 lbs 7
KD4000 4" Die 41⁄2" 4 lbs 8
K88008 Metal Storage Case – 5 lbs 9
Set Includes:
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
101
KEYWAY TOOL
Punches holes for oil-tight electrical switches.
Keyway tool (Part # KKT316) forms 3⁄16" notch
in punched hole to prevent rotary movement
of switch.
Individual Punch & Die Slug-Out™
1⁄2" to 4" conduit size.
• A complete selection of 11 individual punch,
die and drive screw sets from 1⁄2" - 4".
• Four-point design allows slug to drop
automatically without splitting.
• Punches up to 10-gauge mild steel and 12-gauge
stainless steel.
Part # Weight Pipe Size Hole Size Punch # Weight Die # Weight Drive Screw # Weight
KOS-500B 1.5 lbs 1⁄2"7⁄8" KP500B .4 lb KD500B 1 lb KSB50B 1 lb
KOS-750B 1.5 lbs 3⁄4"1
3⁄32" KP750B .4 lb KD750B 1 lb KS752B 1 lb
KOS-1000B 1.8 lbs 1" 111⁄32" KP1000B 1 lb KD1000B 1 lb KS752B 1 lb
KOS-1250B 1.75 lbs 11⁄4”1
11⁄16” KP1250B 2 lbs KD1250B 2 lbs – –
KOS-1250DS 1.8 lbs 11⁄4"1
11⁄16" KP1250B 2 lbs KD1250B 2 lbs KS752B 1 lb
KOS-1500B 1.8 lbs 11⁄2”1
15⁄16” KP1500B 2 lbs KD1500B 2 lbs – –
KOS-1500DS 1.9 lbs 11⁄2"1
15⁄16" KP1500B 2 lbs KD1500B 2 lbs KS752B 1 lb
KOM1732 3 lbs – 17⁄32" KP1732B .3 lb KD1732B .3 lb KS752B 1 lb
KOM200 2 lbs 2" 23⁄8" KP2000B 2 lbs KD2000B 2 lbs KS752B 1 lb
KOM250 4 lbs 21⁄2"2
7⁄8" KP2500 3 lbs KD2500 3 lbs KSN2530 1.5 lbs
KOM300 5 lbs 3" 31⁄2" KP3000 4 lbs KD3000 4 lbs KSN2530 1.5 lbs
KOM350 10 lbs 31⁄2" 4" KP3500 4 lbs KD3500 4 lbs KSN3540 4 lbs
KOM400 11 lbs 4" 41⁄2" KP4000 4 lbs KD4000 4 lbs KSN3540 4 lbs
KKT316 Keyway Tool (for use with KOM1732)
Individual Slug-Out™ Components
1⁄2" to 4" conduit size.
• Four-point design allows slug to drop automatically without splitting.
• Punches up to 10-gauge mild steel and 12-gauge stainless steel.
Part # Description Hole Size Weight
KP500B 1⁄2" Punch 7⁄8".4 lb
KD500B 1⁄2" Die 7⁄8"1 lb
KSB50B Drive Screw for 1⁄2" Punch & Die – 1 lb
KP750B 3⁄4" Punch 13⁄32".4 lb
KD750B 3⁄4" Die 13⁄32"1 lb
KS752B Drive Screw for 3⁄4" thru 2" Punch & Die – 1 lb
KP1000B 1" Punch 111⁄32"1 lb
KD1000B 1" Die 111⁄32"1 lb
KP1250B 11⁄4" Punch 111⁄16" 2 lbs
KD1250B 11⁄4" Die 111⁄16" 2 lbs
KP1500B 11⁄2" Punch 115⁄16" 2 lbs
KD1500B 11⁄2" Die 115⁄16" 2 lbs
KP1732B 17⁄32" Punch 17⁄32" 2 lbs
KD1732B 17⁄32" Die 17⁄32" 2 lbs
KP2000B 2" Punch 23⁄8" 2 lbs
KD2000B 2" Die 23⁄8" 2 lbs
KP2500 21⁄2" Punch 27⁄8" 3 lbs
KD2500 21⁄2" Die 27⁄8" 3 lbs
KSN2530 Drive Screw for 21⁄2" & 3" Punch & Die – 1.5 lbs
KP3000 3" Punch 31⁄2" 4 lbs
KD3000 3" Die 31⁄2" 4 lbs
KP3500 31⁄2" Punch 4" 4 lbs
KD3500 31⁄2" Die 4" 4 lbs
KSN3540 Drive Screw for 31⁄2" & 4" Punch & Die – 4 lbs
KP4000 4" Punch 41⁄2" 4 lbs
KD4000 4" Die 41⁄2" 4 lbs
KOM300 Assembled
KOM300 Apart
3⁄16" (4.7mm)
(17.4mm)
11⁄16"
17⁄32"
(30.9mm)
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
102
Notching Pliers
Creates clean notches for making keyways for push
button switches.
• Ergonomically paddled handles for easy use.
• Accommodates up to 10-gauge mild steel.
Part # Description Weight
NP-1 Notching Pliers 3.3 lbs
NPR-1 Replacement Head for NP-1 1.2 lbs
Part # Description Weight
SP3500 35-ton Steel Punch Set 40 lbs
Part # Description Weight
SPD-438 3⁄8" Punch & Die Set 1 lb
SPD-563 1⁄2" Punch & Die Set 1 lb
SPD-688 5⁄8" Punch & Die Set 1 lb
SPD-813 3⁄4" Punch & Die Set 1 lb
SPK10 Installation Kit 5 lbs
Set Includes:
NP-1
NPR-1
3/16 (4.8 mm)
1/8 (3.2mm)
Hydraulic Pumps
and Hoses
recommended for use
with SP-3500 Punch:
• PE20D Electric Pump
• HC913 6' Hose
• PH39 Manual Pump
• HC927 10' Hose
• PH80 Manual Pump
tip:
35-Ton Hydraulic Punch
Punches clean, burr-free bolt and small conduit holes
in mild steel plates, beams, railings, bus bars or angle
iron up to 1⁄2" thick.
• Portable or fixed applications. Lift and position with
easy-carry handle or mount for production setups.
Height 133⁄4", weight 35 lbs.
• Four punch and die sets included for round holes
7⁄16" - 13⁄16" diameter (gives clearance for 3⁄8", 1⁄2", 5⁄8"
or 3⁄4" bolts or conduit) plus die changeover tool set.
Throat depth 3".
• Holding plates grip work while punching to prevent binding
and clamp punch in place to free operator’s hands.
SEE PG FOR MORE INFO ON
47 Electric Pumps
SEE PG FOR MORE INFO ON
49Manual Pumps
To make easy
keyway holes, use
Gardner Bender's Keyway
Tool Part # KKT316.
tip:
SEE PG FOR MORE INFO ON
101 Keyway Tool
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
103
Hydraulic Super Stainless Steel Slug-Out™ Set
1⁄2" - 2" conduit size.
• Punches stainless steel up to 10-gauge (3.5 mm).
• Exclusive three-knife design splits slug into three pieces.
• Easy-to-use portable pump.
• Includes durable steel case.
Part # Description Weight
KSS520A Hydraulic Super Slug-Out™ Set 35 lbs
Super Stainless Steel Slug-Out™ Set
1⁄2" - 2" conduit size.
• Punches stainless steel up to 10-gauge (3.5 mm).
• Exclusive three-knife design splits slug into three pieces.
• Rugged storage case.
• Extended punch life.
Part # Description Weight
KSS520 1⁄2" - 2" Super Stainless Steel Knockout Set 4 lbs
16
13
17
14
15
11&12
9&10
7&8
5&6
3&4
1&2
16
13 14 15
11&12 9&10 7&8 5&6 3&4 1&2
Part # Description Hole Weight I.D. #
KPS500 1⁄2" Punch 7⁄8".4 lb1
KDS500 1⁄2" Die 7⁄8"1 lb2
KPS750 3⁄4" Punch 13⁄32".4 lb 3
KDS750 3⁄4" Die 13⁄32"1 lb 4
KPS1000 1" Punch 111⁄32"1 lb 5
KDS1000 1" Die 111⁄32"1 lb 6
KPS1250 11⁄4" Punch 111⁄16" 2 lbs 7
KDS1250 11⁄4" Die 111⁄16" 2 lbs 8
KPS1500 11⁄2" Punch 115⁄16" 3 lbs 9
Part # Description Hole Weight I.D. #
KDS1500 11⁄2" Die 115⁄16" 2.5 lbs 10
KPS2000 2" Punch 23⁄8" 5 lbs 11
KDS2000 2" Die 23⁄8" 4.5 lbs 12
PH20 Hand Pump – 5 lbs 13
KPR7540 Drawstud for 3⁄4" - 2" – 2.5 lbs 14
KPS50 Drawstud for 1⁄2" – .2 lb 15
CH1211 12 ton Hydraulic Cylinder – 6 lbs 16
H864 6' Rubber Hose Coupler – 2 lbs 17
Set Includes:
Part # Description Hole Weight I.D. #
KPS500 1⁄2" Punch 7⁄8".4 lb 1
KDS500 1⁄2" Die 7⁄8"1 lb 2
KPS750 3⁄4" Punch 13⁄32".4 lb 3
KDS750 3⁄4" Die 13⁄32"1 lb 4
KPS1000 1" Punch 111⁄32"1 lb 5
KDS1000 1" Die 111⁄32"1 lb 6
KPS1250 11⁄4" Punch 111⁄16" 2 lbs 7
KDS1250 11⁄4" Die 111⁄16" 2 lbs 8
Part # Description Hole Weight I.D. #
KPS1500 11⁄2" Punch 115⁄16" 3.5 lbs 9
KDS1500 11⁄2" Die 115⁄16" 2.5 lbs 10
KPS2000 2" Punch 23⁄8" 5 lbs 11
KDS2000 2" Die 23⁄8" 4.5 lbs 12
KPR7520 3
⁄4" - 2" Drawstud for Hydraulic Driver – 1 lb 13
KSA50 1⁄2" Adapter – .3 lb 14
KPS50 1⁄2" Drawstud – .2 lb 15
K88020 Metal Case – 4 lbs 16
Set Includes:
Use this set to expand your
KOS5290 or KOS520.
tip:
SEE PG FOR MORE INFO ON
98Hydraulic Drivers
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
104
Drawstuds
Shown Actual Size
KPS50 21⁄2" x 3⁄8"
KSA50 13⁄8" x 3⁄4"
KOR75125 33⁄16" x 3⁄4"
KOR152 43⁄4" x 3⁄4"
KPR7520 413⁄16" x 3⁄4"
KC3540 23⁄8" x 11⁄8"
KPR7540 105⁄16" x 3⁄4"
K0R50 3" x 3⁄8"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
105
Drawstuds
Shown Actual Size
KSN3540 Stud 75⁄8" x 11⁄8"
KSN3540 Hex Drive Nut 21⁄2" x 13⁄8"
KSN2530 Hex Drive Nut 11⁄2" x 1"
KSN2530 Stud 6" x 3⁄4"
KS752B Drawstud &
Bearing 41⁄4" x 3⁄4"
KSB50B Drawstud &
Bearing 23⁄4" x 3⁄8"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
106
Mechanical Super Stainless Steel Slug-Out™ Set
1⁄2" - 11⁄4" conduit size.
• Punches stainless steel up to 10-gauge (3.5 mm).
• Exclusive three-knife design splits slug into three pieces.
• Constructed of high-alloy tool steel.
• Rugged storage case.
Part # Description Weight
KSS50125 1⁄2" - 11⁄4" Super Slug-Out™ for Stainless Steel 4 lbs
1&2
3&4
5&6
7&8
11
10
9
Part # Description Hole Weight I.D. #
KPS500 1⁄2" Punch 7⁄8" .4 lb 1
KDS500 1⁄2" Die 7⁄8"1 lb 2
KPS750 3⁄4" Punch 13⁄32" .4 lb 3
KDS750 3⁄4" Die 13⁄32"1 lb 4
KPS1000 1" Punch 111⁄32"1 lb 5
KDS1000 1" Die 111⁄32"1 lb 6
Part # Description Hole Weight I.D. #
KPS1250 11⁄4" Punch 111⁄16" 2 lbs 7
KDS1250 11⁄4" Die 111⁄16" 2 lbs 8
KSB50B Bearing and Drawstud for 1⁄2" – .5 lb 9
KS752B Bearing and Drawstud for 3⁄4" - 2" – 1 lb 10
K88007 Storage case – 1.5 lbs 11
Set Includes:
Part # Description Weight Punch # Weight Die # Weight
SP-7 Stud Punch 6 lbs 43-52 1 lb 43-95 1 lb
SEE PG FOR MORE INFO ON
159Stud Insulators
Stud Punch
Punches 111⁄32" holes for 1⁄2" to 1" conduit or pipe.
• Features a spring loaded sleeve that increases the life and
accuracy of the punch while providing a smoother
cutting action.
• Easily punches “H” studs without damaging flanges.
• Automatic stripper.
• High-leverage design permits punching holes in aluminum
studs and mild steel (up to 20-gauge) with minimum effort.
• From the center of the punch to the back of the housing
measures 2".
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
107
Step Bits
Drills large holes in confined spaces.
• Self-starting, self-centering drill tip. No pilot hole required.
• For accurate step-by-step drilling in sheet metals. Drills
through 10-gauge mild steel or stainless steel.
• Double flute cutting action drills clean, round holes
quickly and safely with minimum effort.
• Exclusive three-lobed shank for positive, non-slip grip in
drill chucks.
• Made of high-speed steel for faster drilling and longer life.
• Applications include junction boxes, switch boxes, metal studs,
electrical appliances, lighting fixtures and many other uses.
No. of Shank Step
Part # Sizes Increments Sizes Size Thickness Weight
SB-205 1⁄4" - 3⁄4"1⁄16"9
3⁄8"1⁄8"1 lb
SB-207 3⁄16" - 7⁄8"1⁄16"12
3⁄8"1⁄8" 1.3 lbs
SB-209 7⁄8" - 11⁄8"– 2 1⁄2"1⁄8" 1.5 lbs
SB-210 7⁄8" - 13⁄8"1⁄16"11
3⁄8"1⁄8" 1.8 lbs
SB-210
SB-209
SB-207
SB-205
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
108
NOTES
HAND TOOLS
112
With exclusive features for safety and
durability, Gardner Bender hand tools
offer superior performance on the job.
109
121
123
117
119
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
110
Circuit Alert™ . . . . . . . . . . . . . . . . . . .111-113
Circuit Alert™ Tester . . . . . . . . . . . . . . . 111
Circuit Alert™ Knife . . . . . . . . . . . . . . . . .111
Circuit Alert™ Wire Strippers . . . . . . . . .112
Circuit Alert™ Work Lights . . . . . . . . . . .112
Circuit Alert™ Pliers . . . . . . . . . . . . . . . .113
Circuit Alert™ Screwdrivers . . . . . . . . . .113
Cutters . . . . . . . . . . . . . . . . . . . . . . . .122-123
BX cutter . . . . . . . . . . . . . . . . . . . . . . . . .122
Ratcheting . . . . . . . . . . . . . . . . . . . . . . . .123
PVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Datacom/ VDV . . . . . . . . . . . . . . . . . .118-119
Cable strippers . . . . . . . . . . . . . . . . . . . .118
Punch-down . . . . . . . . . . . . . . . . . . . . . .119
Crimpers . . . . . . . . . . . . . . . . . . . . . . . . .119
Fuse Puller . . . . . . . . . . . . . . . . . . . . . . . . .124
Knives . . . . . . . . . . . . . . . . . . . . . . . .111, 124
Pliers . . . . . . . . . . . . . . . . . . . . . . . . .120 -121
Long Nose . . . . . . . . . . . . . . . . . . . . . . .120
Linemen’s . . . . . . . . . . . . . . . . . . . . . . . .121
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . .123
Wire Strippers . . . . . . . . . . . . . . . . . .114-117
Multi-tool . . . . . . . . . . . . . . . . . . . . . . . .116
Cable Rippers . . . . . . . . . . . . . . . . . . . . .117
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
111
N
e
w
S
n
a
p
-
I
n
S
e
n
s
o
r
Audible
Visual
Wire
Strippers
Work Lights
Screwdrivers
Pliers
Electrician’s
Knives
Circuit Alert™
Voltage Sensing Module
The Circuit Alert™ voltage sensing module
fits in a whole variety of Circuit Alert™ tools.
• Non-contact AC voltage detection.
• Audio and visual alerts.
• Pocket clip.
• Tri-directional momentary on/off switch.
Part # Description
CAM-10 Voltage-sensing module
CAM-10 Pocket Clip
Safe & Convenient
NEW line of tools with Snap-in sensor detects
AC voltage without contacting live wires
Circuit Alert™
Voltage Sensing Electrician’s Knife
Rip, strip and cut with one tool.
• Durable, heavy-duty casing.
• Designed specifically for electricians.
• Blade type: industry standard.
Part # Description
RKT-21 Circuit Alert™ Electrician’s Knife with stripper & NM cable ripper
www.circuitalert.com
SEE PG FOR MORE INFO ON
124 RK-6 Electrician’s
Knife
®
For more information, go to www.circuitalert.com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
112
GST-224M
Circuit Alert™
Voltage Sensing Wire Strippers
• Audible and visual alerts indicate the presence
of voltage.
• Cuts and strips solid and stranded wire.
• Stainless steel body for maximum corrosion resistance.
• Ergonomic, cushioned handles for ultimate comfort
and control.
• Double bevel cutting blades for superior nick resistance.
• Dual gripping positions for traditional or forward
hand positions.
• Easy-to-read stamped markings.
• Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32.
• Wire looping holes form wire to fit on screw terminals.
• Plier nose for gripping and pulling.
• cULus listed tester.
• Durable, drop resistant construction.
Wire Stripping Volt Sensing (50-600 VAC) Bolt Cutting and Rethreading
Part # Description Wire Gauge Length
GST-55M Circuit Alert™ Voltage Sensing Wire Stripper #10 - #18 AWG 7"
GST-70M Circuit Alert™ Voltage Sensing Crimper/Stripper #8 - #20 AWG & Multi Crimping Stations 7"
GST-224M Circuit Alert™ Voltage Sensing NM Cable Stripper 12/2 & 14/2 NM Cable 71⁄2"
Patents Pending
Circuit Alert™ Work Lights
Designed for electricians for maximum versatility and
hands-free operation in one durable tool.
• Multi-adjustable.
• Rugged design and construction.
• Batteries included.
Part # Description
FLT-10 Circuit Alert™ Voltage Sensing Work Light
FLT-20 Circuit Alert™ Voltage Sensing Work Light
FLT-10
FLT-20
www.circuitalert.com
GST-70M
GST-55M
www.circuitalert.com
90° Swivel Head Rotating Hang Hook
For more information, go to www.circuitalert.com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
Circuit Alert™ Pliers
Circuit Alert™ pliers combine common electrician’s
needs with Gardner Bender’s over-molded, comfort grip.
• Crimp terminals.
• Cut wire and cable.
• Strip wire.
• Hammer head.
• Forged steel construction for long life.
• Precision hardened cutting blades
Part # Description Size
GPT-70 Circuit Alert™ Voltage Sensing Side Cutters 7"
GPT-80Circuit Alert™ Voltage Sensing Long Nose Pliers 8"
GPT-90 Circuit Alert™ Voltage Sensing Linesmens 8"
GPT-90
GPT-80
GPT-70
Circuit Alert™ Screwdrivers
The Circuit Alert™ screwdrivers deliver up to
10-in-1 bits and insulated comfort grip handles.
• Use with Hex-Lok®connectors.
Part # Description Bits
SDT-3 Circuit Alert™ Voltage Sensing Screwdriver 3-in-1 See diagram
SDT-6 Circuit Alert™ Voltage Sensing Screwdriver 6-in-1 See diagram
SDT-10 Circuit Alert™ Voltage Sensing Screwdriver 10-in-1 See diagram
113
SEE PG FOR MORE INFO ON
9Hex-Lok®
Wire Connector
#21/4"
5/16"
5/16" 1/4"
#13/16"
#2R2
#13/16"
#21/4"
R1 R2
#10 #15
5/16" 1/4"
www.circuitalert.com
www.circuitalert.com
Testing GPT-80 – Wire Stripping GPT-90 – Hammer Head
SDT-3
SDT-6 SDT-10
6-in-1 10-in-1
3-in-1
For more information, go to www.circuitalert.com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
114
GES-55
GESP-224
GESP-55
12/2 and 14/2 NM
Cable Stripper
10-18 AWG Wire Stripper
GESP-224
ArmorEDGE™ Wire Stripper
Strips and cuts solid and stranded wire.
• Stainless steel body for maximum corrosion resistance.
• Ergonomic, cushioned handles for ultimate comfort
and control.
• Double bevel cutting blades for superior nick resistance.
• Dual gripping positions for traditional or forward hand positions.
• Easy-to-read laser-etched markings.
• Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32.
• Wire looping holes form wire to fit on screw terminals.
• Plier nose for gripping and pulling.
• Patents pending.
• Limited Lifetime Warranty.
• GESP-70 crimps insulated and non-insulated terminals,
crimps coaxial “F” connectors, cuts bolt sizes 4-40, 5-40,
6-32, 8-32, 10-24 and 10-32.
Feature
Voltage Sensing 
Spring Action Return  
Pliers Nose 
Loop Hole 
Deluxe Cushion Grip 
Locking Handle 
Wire Stripping Range
Solid #10 - #10 - #10 - #16 - #10 - #10 - #12 & #12 & #8 - #10 - #12 &
#24 #20 #20 #30 #18 #18 #14 #14 #20 #18 #14
Stranded #10 - #10 - #10 - #16 - #12 - #12 - — — #10 - #12 - —
#24 #20 #20 #30 #20 #20 #22 #20
NM Cable — — — — — — 14/2 & 14/2 & — — 14/2 &
12/2 12/2 12/2
GS-40
GS-355
GS-360
GS-361
GES-55
GESP-55
GES-224
GESP-224
GST-70M
GST-55M
GST-224M
Wire Strippers
Comparison Chart
GES-224
Part # Description Handle Wire Gauge Length
GES-55 ArmorEDGE™ Wire Stripper Curved #10 - #18 AWG 61⁄2"
GESP-55 ArmorEDGE™ Wire Stripper Symmetric #10 - #18 AWG 63⁄4"
GESP-70 ArmorEDGE™ Multi-Tool Stripper/Crimper Symmetric #10 - #22 AWG 81⁄4"
GES-224 ArmorEDGE™ NM Cable Stripper Curved 12/2 & 14/2 NM Cable 7"
GESP-224 ArmorEDGE™ NM Cable Stripper Symmetric 12/2 & 14/2 NM Cable 71⁄4"
GESP-70
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
115
Milwaukee Clipper™ Strippers
Strips solid or stranded wire.
• Compact tool adjusts quickly to any of eight wire sizes.
• Hardened spring steel provides strength and durability.
• Looping hole bends and loops wire for termination on screws.
• Vinyl grips for added comfort.
• GS-40 includes spring return for easy handling.
Part # Description Wire Gauge Length
GS-40 Milwaukee Clipper™ Stripper w/spring #10 - #24 AWG 5"
GS-355
GS-360
Strip-Easy™ Stripper
Strips solid or stranded wire.
• Strips wires clean with one easy squeeze, up to a full 7⁄8".
• Blades cut insulation without nicking conductor.
Jaws open automatically to remove wire without
crushing ends.
• AWG size clearly marked at each cutting hole.
• Comfortable no-slip handles.
Part # Description Wire Gauge Length
SE-92 Automatic Wire Stripper #8 - #22 AWG 8"
Wire Strippers
Strips solid or stranded wire.
• Precision stripping stations.
• Laser-etched markings.
• Pliers nose and curved cutting blade aid in pulling and cutting wire.
• Power spring return reduces hand fatigue.
• Curved handles for added comfort.
• Looping hole forms wire to fit on screw terminal.
• Comfortable high-leverage handles.
Part # Description Wire Gauge Length
GS-355 Stripper #10 - #20 AWG 61⁄4"
GS-360 Stripper with lock #10 - #20 AWG 6"
GS-361 Small Gauge Stripper #16 - #30 AWG 61⁄4"
GS-361
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
116
Automatic Stripper & Crimper
Strips solid or stranded wire.
• Automatic jaw-loaded wire stripper self-adjusts.
• Crimps insulated, and non-insulated terminals.
• Comfort high-leverage handles.
Part # Description Wire Gauge Length
GS-394 Automatic Wire Stripper #10 - #26 AWG 8"
Feature GS-365 GS-370 GESP-70
Spring Action Return
Pliers Nose 
Conduit Reamer Nose
Loop Hole 
Deluxe Cushion Grip 
Locking Handle
Cutter Blade 
Cuts & Rethreads Bolts 
Crimps Insulated Terminals 
Crimps Non-insulated Terminals 
Copper & Steel Crimp Sleeves 
Coaxial Connectors 
Wire Stripping Range #6 - #16 #10 - #22 #10 - #22
Multi-Tool Stripper, Cutter & Crimper
Strips and cuts wire.
• Strips copper and aluminum wire, solid or stranded.
• Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32.
• Pliers nose for pulling and looping wire.
• Crimps insulated & non-insulated terminals.
• Crimps coaxial “F” connectors.
• Curved cutting blade.
• Comfort high-leverage handles.
• Precision ground-stripping stations prevent nicking conductor while stripping.
Part # Description Wire Gauge Length
GS-370 Multi-Tool #10 - #22 AWG 81⁄2"
Multi-Tools
Comparison Chart
Multi-Tool Stripper, Cutter & Crimper
Strips #6 - #16 AWG solid, #8 - #18 AWG stranded.
• Strips copper and aluminum wire, solid or stranded.
• Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32.
• Crimps #310, 311, 410 and 411 crimp sleeves,
solderless terminals and coaxial connectors.
• Pliers nose for pulling and looping wire.
• Snub nose for reaming 1⁄2" and 1" conduit.
• Precision ground-stripping stations prevent nicking conductor while stripping.
• Lock for compact storage.
Part # Description Wire Gauge Length
GS-365 Multi-Tool Stripper and Cutter #6 - #16 AWG, Solid 81⁄2"
#8 - #18 AWG, Stranded
SEE PG FOR MORE INFO ON
114 Additional
Multi-Tools
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
Romex®Strippers
Comparison Chart
Multi-Tool Cable Strippers
Strips, crimps and cuts bolts.
• Crimps terminals.
• Strips 10-22 AWG wire.
Part # Description Wire Gauge Length
GS-366 Multi-tool crimper & stripper #10 - #22 AWG 91⁄4"
* See ArmorEDGE and Circuit Alert sections for additional Romex / NM cable strippers.
Dual Romex®Stripper
Strips outer sheath of #12/2 or #14/2 cable in one tool.
• Strips single conductor #12 or #14 AWG.
• Power spring return reduces hand fatigue.
• Curved cutting blade.
• Pliers nose.
• Wire looping hole.
• Cuts and rethreads bolt sizes 6-32 and 8-32.
• Locking handle for compact storage.
SEE PG FOR MORE INFO ON
112 Additional
Romex Strippers
Romex®is a registered trademark of Southwire Company, Carrollton, GA
Feature CR-100 CRC-100 CR-1000 GRX-3224
Spring-Action Return
Pliers Nose
Loop Hole
Wire Stripper 
Locking Handle
Cutter Blade 
Cuts & Rethreads Bolts
Cable Ripping Range 12/2 & 14/2 12/2 & 14/2 10/2 & 14/2 12/2 & 14/2
NM cable NM cable NM Cable NM cable
Part # Description Wire Gauge Length
GRX-3224 NM Cable Stripper 12/2 & 14/2 NM Cable and #12 AWG 75⁄8"
and #14 AWG single conductor
117
CR-100
CRC-100
Cable Ripper
Slits outer covering of Romex®(all sizes, both old and new) and
other non-metallic (type NM) sheathed cable.
• Wire gauge on handle checks and strips #6 to #14 AWG.
• Nickel-plated finish resists corrosion.
Part # Description Wire Gauge Length
CR-100 Cable Ripper 12/2 & 14/2 NM Cable 4"
CRC-100 Curved Cable Ripper 12/2 & 14/2 NM Cable 4"
CR-1000 Premium Cable Ripper 12/2 & 14/2 NM Cable 4"
1. Rip open cable jacket
CR-1000
2. Cut off cable jacket 3. Strip wire ends
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
118
Feature GTPS-100 GS-359 SE-98GTPS-200
Strips RG-58 
Strips RG-59 
Strips RG-6 
Strips CAT 3 Cable 
Strips CAT 5 Cable 
Strips Flat Telephone Wire
Cutter Blade to Cut Cable 
Datacom Strippers
Comparison Chart
UTP/STP Cable Stripper
Strips UTP and STP cable up to .24" (6.2mm) diameter.
• Tension release lever for easy positioning and release of cable.
• Compact design for easy handling.
• For use on CAT 3 and CAT 5 cable.
Romex®is a registered trademark of Southwire Company, Carrollton, GA
Coaxial Stripper
Cuts and strips RG-59 and RG-6 coaxial cable.
• Can be used with both standard and quad shield cable.
• Multiple size stripping stations strip both the outer
jacket and inner conductor.
• Exclusive hex-shaped slot helps push “F”
connectors onto cable.
• Curved cutting blade.
• Patented.
GB EXCLUSIVE!
Part # Description Wire Gauge Length
GS-359 Coaxial Stripper RG-59 & RG-6 61⁄4"
Coaxial Cutter & Stripper
Cuts and strips coaxial cable (RG-58, RG-59 and RG-6).
• Easily adjusts to various cable thickness.
• One-squeeze cutting action.
• Includes replacement blade model #SERB-25.
Part # Description Wire Gauge Length
SE-98Coaxial Cable Cutter & Stripper RG-58, RG-59 & RG-6 43⁄4"
data
com
data
com
Part # Description Wire Gauge Length
GTPS-100 UTP/STP Round Cable Stripper UTP/STP 31⁄4"
GTPS-200 Premium Cable Stripper UTP, STP, flat, round from 1⁄8" to 3⁄8" in 41⁄2"
diameter and silver satin and other flat cables
data
com
GTPS-200
GTPS-100
data
com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
119
Punch-Down Tools
High-impact design assures good quality terminations.
• Inserts and cuts cable in termination blocks.
• Constructed of durable ABS resin.
• Impact adjustment with high/low setting
accommodates multiple applications.
• Extra blade can be stored in handle.
• Spring-loaded design quickly and easily inserts and
trims terminations.
• 110-style blade used in CAT 3 and CAT 5 terminations.
• 66-style blade used to terminate phone wiring.
Part # Description
PDB-66 Type-66 Replacement Blade
PDB-110 Type-110 Replacement Blade
Replacement Blades:
data
com
PDB-66 PDB-110
RJ45 / RJ11 Modular Plug Crimp Tool
Used to produce patch cable and handset cables,
cut, strip and crimp.
• Heat-treated steel frame provides
strength and durability.
• Replacement cutting blade extends
the life of the tool.
• Slip-resistant handles.
Part # Description Plugs Pins
GMC-1145 Telephone Crimp Tool, RJ-11/12 and RJ-45 RJ-11, RJ-12 2, 4, 6
RJ-45 8
GMC-2000L1 Module Crimp Tool Kit RJ-11, RJ-45 2, 4, 8
data
com
GMC-1145
GMC-2000
Part # Description Network Length
PDT-110 Type-110 Terminal Punch-Down Tool with Blade Data 71⁄2"
PDT-110LC Non-Impact Punch-Down Tool Data 53⁄4"
PDT-110
PDT-110LC
Wire Stripper & Punchdown Tool
Cuts, strips & terminates.
• Strips: RG6, CAT3, CAT5, UTP, STP flat and
round, speaker wire, flat telephone wire.
• Type 110/66 terminal punchdown.
Part # Description Network Length
SPD-10L Ergo datacom combination tool Data 7"
data
com
data
com
data
com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
120
Long Nose Pliers
Long Nose Pliers
Multi-function pliers – cuts, strips and crimps.
• Use needle nose to form wire or grip small parts.
• Strips #14 - #16 AWG solid or stranded wire.
• Crimps insulated terminals up to #10 AWG.
• Cutting blade cuts solid or stranded wire.
Part # Description Length
GS-385Long Nose w/ Cutter and Crimper 61⁄2"
Long Nose Pliers with Side Cutter
Long nose design for forming and looping wire
and handling small parts.
• Forged from high-carbon steel for durability and strength.
• Knurling on jaws grips work tightly.
• Cutting edges are heat treated to hold their edge.
• Comfort-grip handles.
Part # Description Length
GPS-3238Long Nose Pliers 81⁄2"
GPS-3220
Part # Description Length
GPS-3220 Cutting Pliers, Box Joint 8"
GS-386Diagonal Cutting Pliers 6 3⁄8"
Cutting Pliers
GS-386
Cutting Pliers, Box Joint
Tapered nose allows cutting in tight locations.
• Dual cutting edge and high-leverage handle design
for optimal gripping and cutting performance.
• Precision-machined and induction-hardened
knives strengthen cutters and provide consistent
performance when cutting aluminum, copper and
medium-hard steel wire.
• Comfort-grip handles.
Cutting Pliers, Curved Diagonal
Angled head allows cutting in tight locations.
• Dual cutting edges and high-leverage handle design
for optimal gripping and cutting performance.
• Precision-machined and induction-hardened
knives strengthen cutters and provide consistent
performance when cutting aluminum, copper and
medium-hard steel wire.
• Flared handles for added comfort.
Part # Description Length
GPS-3228Cutting Pliers, Curved Diagonal 8"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
121
Linemen's Pliers with Fish Tape Puller
Built-in groove designed for gripping and pulling flat fish tape.
• Forged from high-carbon steel for durability
and strength.
• Precision-machined and induction-hardened
knives strengthen cutters and provide
consistent performance when cutting aluminum,
copper and medium-hard steel wire.
• Comfort-grip handles.
Part # Description Length
GPS-3214 Linemen's Pliers w/ Fish Tape Puller 91⁄2"
Linemen's Pliers
Medium-duty side-cutting pliers.
• Cuts copper or aluminum wire.
• Serrated, square tip jaw for extra grip on bolts.
• Hardened-steel construction for long life.
• Comfort-grip handles.
Part # Description Length
GS-387Linemen's Pliers 71⁄2"
Linemen’s Pliers
SEE PG FOR MORE INFO ON
74 Fish Tapes
Built-in groove designed for gripping
and pulling flat fish tape
Linemen's Pliers with Cutter & Crimper
High-leverage tool with crimping die and side cutters.
• Comfort-grip handles.
Part # Description Length
GCP-3400 Linemen's Pliers and Crimping Tool 91⁄2"
Part # Description Length
GPS-3219 Linemen's Pliers, Round Nose 91⁄4"
Linemen's Pliers, Round Nose
Standard pliers cut aluminum, copper and
medium-hard steel wire.
• Forged from high-carbon steel for durability
and strength.
• Dual cutting edges and high-leverage handle
design for optimal gripping and cutting performance.
• Precision-machined and induction-hardened knives strengthen
cutters and provide consistent performance.
• Comfort-grip handles.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
122
8" Crimping Pliers
Crimp insulated or non-insulated terminals.
• Cuts copper and aluminum wire.
• Tapered nose for cutting in tight locations.
Part # Description Length
GS-388 Crimping Pliers 8"
Crimping Pliers
Part # Description Length
GBX-300 BX Armor Cutter 71⁄4"
Part # Description Pk
GBRX-301 Replacement Blade 3pk
Replacement Parts:
BX & Flexible Cable Cutter
Cuts BX, MC, AC, and liquid tight 3⁄8".
• High durability blade provides 2X normal wear characteristics.
• Includes storage space for replacement blades.
• Pivot shaft is reinforced with high strength steel sleeve.
• 25 foot drop test.
• Thumbwheel for easy blade change, no
tooling required.
• Patented quick-clamp feature automatically adjusts
to cable size and secures it for splitting.
• Automatic release ejects cable.
• Cutting depth adjustment ensures clean cuts without
nicking cable.
Cable Cutter
Cable-cutting tool designed to cut cleanly with high-leverage
one-hand operation.
• Cuts soft copper & aluminum cable.
Part # Description Cut Size Length
GC-375 Cable Cutter 2/0 8"
High-Leverage Cutters
Cuts soft copper and aluminum cable up to 1000 MCM.
• Heat-treated alloy steel jaws make fast, sharp cuts.
• Lightweight fiberglass handles on GC-500 and
GC-1000 feature comfortable rubber grips.
GC-1000
GC-500
Part # Description Cut Size Length
GC-500 Cable Cutter 500 MCM max 24"
GC-1000 Cable Cutter 1000 MCM max 33"
Extra blade storage
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
123
Ratcheting Cable Cutter
Cut copper and aluminum cable up to 750 MCM.
• Ratcheting mechanism for increased leverage.
• Variable-force cutting action permits choice between
high force and speed.
• Dual-action handles cut from either direction;
easy to use in tight spots.
• Hardened alloy-steel blades are easily sharpened without
removing them from tool.
• Rubber hand grips permit firm grip control.
Part # Description Jaw Opening Length
GRC-750 Ratcheting Cable Cutter 19⁄16"15
3⁄4"
Cut-A-Way™ PVC Conduit Cutter
Cuts flexible, watertight flexible and schedule 40 PVC
conduit 1
⁄2" to 2".
• Patented design makes fast, clean cuts.
• Tough, lightweight nylon handles.
• Compact 8" tool fits neatly and safely into pocket or
tool pouch.
Insulated Screwdriver Set
Part # Description Length Qty Description
SCE-3262 Insulated Screwdriver 8" 1 No. 2 Phillips®tip
Set, 2 pc. 13⁄16" Slotted tip
Set Contains:
Reversible Insulated Screwdriver
Reversible tip combines two tools into one.
• Molded shaft insulation tested to 1000 V provides
secondary protection against accidental electrical shock.
• Ergonomic grip is engineered for maximum torque with
minimum effort.
Part # Description Reverse from Reverses to
SCE-3260 Insulated Screwdriver, Reversible tip No. 2 Phillips®3⁄16" Slotted
Triple Tap
Three-in-one tapping tool designed for electrical work.
• Cleans and rethreads holes.
• Made of top-grade steel. Tap Sizes
6-32 8-32 10-24
Part # Description Length
TT-10B 3 Size Tapping Tool 67⁄8"
Part # Description Length
GPC-200 Cut-A-Way™ PVC Cutter (2") 17"
GKC-100A Cut-A-Way™ PVC Cutter (1") 8"
GPC-200
GKC-100A
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
124
Fuse Pullers
Part # Description Fuse Size Length
FPE-20 Fuse Puller 0-200A/250V and 0-100A/600V 8"
Electrician’s Knife
Rip, strip, and cut with one tool.
• Reversible blade for longer life.
• Quick blade change.
• Wire stripper.
• NM cable ripper.
• Storage area in handle for spare blades.
• Includes three replacement blades.
Part # Description
RK-6 Electrician’s Knife, 6"
Electrician's Knife
Two-in-one tool has sharpened blade for skinning wire and
screwdriver tip for screws.
• Tempered carbon-steel blades sharpen easily and hold their edge.
• Compact 33
⁄4" size.
Part # Description
KF-200 Two-in-one Electrician's Knife
Cable Ripper Wire Stripper
TESTERS
130
129
131
134
135
Gardner Bender is pleased to offer this
innovative, full featured line designed to
make electrical work faster and safer.
125
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
126
Battery Tester (Analog) . . . . . . . . . . . . . . .136
Continuity Tester
Heavy-Duty . . . . . . . . . . . . . . . . . . . . . . .129
Multimeters - Analog . . . . . . . . . . . . . . . . .133
Analog Multimeters Comparison Chart . .133
Five Function, 12-Range . . . . . . . . . . . .133
Six Function, 14-Range . . . . . . . . . . . . .133
Seven Function, 19-Range . . . . . . . . . . .133
Multimeters - Clamp-On . . . . . . . . . . . . . . .135
Clamp-On Comparison Chart . . . . . . . . .135
AC Clamp Meter with Lockjaw . . . . . . . .135
Auto-Ranging Digital . . . . . . . . . . . . . . . .135
Multimeters - Digital . . . . . . . . . . . . . . . . .134
Digital Multimeters Comparison Chart . .134
Three Function, 13-Range . . . . . . . . . . .134
Four Function, 14-Range . . . . . . . . . . . .134
Seven Function, 7-Range Auto-Ranging . .134
Non-Contact Voltage Testers . . . . . . . . . . .130
Non-Contact Voltage Testers
Comparison Chart . . . . . . . . . . . . . . . .130
Circuit Alert™ . . . . . . . . . . . . . . . . . . . . .130
Live-Wire™ . . . . . . . . . . . . . . . . . . . . . . .130
Receptacle Testers/Analyzers
Receptacle Testers/Analyzers
Comparison Chart . . . . . . . . . . . . . . . .131
Lan Tracker™ . . . . . . . . . . . . . . . . . . . . .132
Receptacle Tester & Circuit Analyzer . . .131
GFCI & Circuit Analyzer . . . . . . . . . . . . .131
Voltage Testers . . . . . . . . . . . . . . . . . .127-129
Voltage Testers Comparison Chart . . . . .127
6-way Circuit . . . . . . . . . . . . . . . . . . . . . .128
Heavy-Duty 3-way . . . . . . . . . . . . . . . . .128
Low Voltage Twin Probe . . . . . . . . . . . . .127
Screwdriver, Voltage Probe &
Continuity Tester . . . . . . . . . . . . . . . . .128
Solenoid . . . . . . . . . . . . . . . . . . . . . . . . .129
Tester Leads . . . . . . . . . . . . . . . . . . . . . . . .136
Tester Replacement Parts
(fuses, batteries) . . . . . . . . . . . . . . . . . . .137
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
127
Voltage Testers
Selection Chart
Low Voltage Twin Probe
Circuit Tester
Tests AC/DC Voltage from 5 - 50 V AC/DC, 50-60 Hz.
• Indicator glows when voltage is present and
brightens as voltage increases.
• Insulated alligator clip test leads.
• Pocket clip for added convenience.
• Dual Insulated, durable ABS housing.
TESTS
Low volt outdoor lighting
Low volt control panels
Doorbells
Alarm systems
Automotive 12 V DC and 36 V DC
Twin Probe Circuit Tester
Tests AC/DC Voltage from 80-250 V AC/DC.
• Neon indicator glows when voltage is present
and brightens as voltage increases.
• Insulated housing.
• Insulated test leads.
• Pocket clip for added convenience.
• 2" test lead.
TESTS
DC motors
Switches
Outlets
GET-3202
GET-3100
Warranty
One Year
No batteries
required
No batteries
required
Warranty
One Year
300V
50V
Feature GET-3202 GET-3100 GET-3213 GET-3206 GCV-3206 GVT-392 GCT-3304 GAT-3400 GVD-3504 GVD-3505
Voltage Range
AC Voltage 5-50V 80-250V 80-300V 120-300V 12-250V 120-480V 50-600V 12-600V
DC Voltage 5-50V 80-250V 80-300V 150-380V 12-250V 120-480V 6-12V
Functions
Polarity
Continuity 
Tracing
Indication
Audible 
Visual 
Vibration
General
Lead Length 5.5" 2" 24" 30" 30" 26" 36" 36"
Pocket Clip   
Agency Approvals
Drop Rating 6'6'6'6'6'6'6'6'6'6'
Crush Rating 150 Lb 150 Lb 150 Lb 150 Lb 150 Lb 150 Lb 150 Lb 150 Lb 150 Lb 150 Lb
CAT Rating I 50V II 300V II 300V III 600V III 600V III 600V
Warranty 1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
128
6-Way Circuit Tester
Tests AC Voltage at 120, 240, 480 V and DC
Voltage at 150, 300 and 500 V.
• 30" test lead.
• Bright neon indicators.
• Rugged twin-probe design
features heavy-duty
test lead insulators.
TESTS
Outlets
Panels
Light Fixtures
Switches
Circuit Breakers
Motors
Appliances
Fuses
GET-3206
Combination Screwdriver, Voltage
Probe & Continuity Tester
Tests for Continuity and AC/DC Voltage.
• Tests continuity on non-energized circuits.
• Tests from 12 - 250 V AC/DC on energized circuits.
• LED indicator glows when voltage or
continuity exists.
• Batteries included.
• Convenient screwdriver tip
and pocket clip.
TESTS
Outlets
Fuses
Switches
Extension cords
Light fixtures
Low Voltage Lighting Circuits
GCV-3206
Heavy-Duty 3-way Voltage Tester
Tests AC/DC Voltage at 120, 240 and 277 V.
• Individual indicators for each voltage range
assures reliability.
• Functional, lightweight design features twin
flexible leads and convenient pocket clip.
• 24" test lead.
• Dual insulated, durable ABS housing.
• Pocket clip for added convenience.
TESTS
Outlets
Panels
Light fixtures
Switches
Circuit Breakers
GET-3213
Warranty
One Year
Warranty
One Year
Warranty
One Year
300V
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
129
Solenoid Voltage Tester
Test AC/DC Voltage from 120 - 480 V and DC Polarity.
• Dual voltage indication: solenoid vibration
and neon bulb.
• Neon bulb indicates DC polarity.
• Built-in slots in probe housing hold probes
for one-hand testing and storage.
• 4' reach from probe to probe with
probes unlocked.
• High-impact, dual insulated, case
stands up to rugged service.
TESTS
Outlets
Panels
Light fixtures
Switches
Circuit Breakers
Extension Cords
GVT-392
Heavy-Duty Continuity Tester
Tests for continuity in non-energized circuits.
• 36" insulated test lead with alligator clip.
• Bright indicator bulb lights if
continuity exists.
• Requires (2) AAA batteries, included.
• Pocket clip for added convenience.
TESTS
Extension cords
Fuses
Switches
Water heater coils
Unenergized low voltage wiring
GCT-3304
Warranty
One Year
600V
Warranty
One Year
Probes lock together
to enable one
handed testing of
standard outlet
GAT-3400
Warranty
One Year
Automotive Voltage Tester
Used to test DC Voltage in automotive applications.
• DC Voltage from 6-12 V.
• Durable ABS Housing w/pocket clip.
• 3' test lead with alligator clamp.
• Sharp tip for piercing wire jacket.
• Pocket clip for added convenience.
TESTS
Fuses in junction block
Automotive circuits for voltage
Back probe connectors & sockets
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
130
Circuit Alert™ Non-Contact
Voltage Detector
Indicates the presence of AC Voltage from 50 - 600 V.
• Visual (flashing) and audible (beeping) indicators
signal presence of voltage.
• Built-in “safe test” feature assures batteries are
operating properly.
• Compact design fits in shirt pocket.
• Operates from 1-AAA battery (included).
• Patented.
TESTS
Outlets
Switches
Circuit breaker panels
Wiring
Light fixtures
Live-Wire™
Adjustable sensitivity detects the presence of AC
Voltage from 12 - 600 V without contacting wires.
• Visual (flashing) and audible (beeping)
indicators signal presence of voltage.
• Adjustable sensing levels.
• Built-in “safe test” feature assures
batteries are operating properly.
• Operates from 2-LR44 1.5 Volt
batteries (included).
TESTS
Doorbells
Low voltage lighting
Outlets
Switches
Electrical panels
Light fixtures
GVD-3504
GVD-3505
Non-Contact Voltage Testers
Comparison Chart
Feature GVD-3504 GVD-3505
Detection Range 50-600 V AC 12-600 V AC
Visual 
Audible 
Adjustable Sensitivity
Pocket Clip 
Agency Approvals
Warranty 1 year 1 year
Batteries 1 AAA (2) Button
(included) Cells
*Patent # 5877618
Warranty
One Year
600V
Warranty
One Year
600V
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
131
Receptacle Tester & Circuit Analyzer
Tests standard receptacles to ensure proper wiring.
• Neon indicators give positive indication of circuit status.
• Compact unit simply plugs into any standard
3-wire/grounded receptacle (110 - 125 V
AC circuits).
• Tests for six circuit conditions: open
ground, open neutral, open hot,
hot/ground reverse, hot/neutral
reverse, and correct wiring.
• Succession of yellow and red lights
provides indication of circuit status or
specifies wiring errors.
• Easy-to-read three views –
top, side and bottom.
TESTS
Standard outlets
Extension cords
Ground Fault Receptacle Tester
& Circuit Analyzer
Tests ground fault receptacles by overloading
circuit and tripping GFCI.
• Easy to use. Simply plug tester into any
circuit protected by a ground fault receptacle
(110 - 125 V AC) and press black
button to overload circuit.
• Tests for seven conditions: ground
fault interruption, open ground,
open neutral, open hot, hot/ground
reverse, hot/neutral reverse, and
correct wiring.
• Succession of yellow and red lights
provides indication of circuit status or
specifies wiring errors.
• Tester trips GFCI between 6 - 9 mA.
TESTS
Standard outlets
GFCI outlets
Extension cords
Receptacle Testers / Analyzers
Comparison Chart
Tests for: GRT-3500 GFI-3501
Open Ground 
Open Neutral 
Open Hot 
Hot / Ground Reversed 
Hot / Neutral Reversed 
Correct Wiring 
GFCI Test Function
Agency Approvals
Warranty 1 year 1 year
GRT-3500
GFI-3501
Warranty
One Year
Tests standard
outlets
Tests standard
outlets
Tests outlets
protected by GFCIs
Warranty
One Year
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
132
GET-4220K
Lan Tracker™
Multi-Purpose Wire Tracer
Traces any unshielded and unenergized wire or cable.
• Four transmitter plug types encased inside
closeable hatch:
- RJ-11 - Alligator Clips
- Coax - RJ-45
• Detects unshielded wires up to 12", when
using ground clip.
• Adjustable sensitivity detects wires in
close proximity.
• L.E.D. intensifies as the signal gets stronger.
• Audible feature differentiates transmitter signal
from other signals.
• Requires; (2) AA batteries for
transmitter (included)
(3) 1.5 V LR-44 batteries for
Receiver Wand (included)
• Patented.
Warranty
Five Year
data
com
Trace Data CablesTrace Coax Cable
Compact ReceiverTrace Phone Lines
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
133
Analog Multimeters
Full family of analog multimeters test AC Voltage, DC Voltage,
DC Current, Resistance, Continuity, and batteries.
• Manual range selection.
• Easy to read, color-coded analog displays.
• All testers include batteries, test leads, spare fuse, and
operating instructions.
• All are Agency approved and incorporate fuse overload
protection circuitry.
Warranty
One Year
GMT-312 GMT-318GMT-319
Feature GMT-312 GMT-318GMT-319
Voltage Range
AC Voltage 300V 500V 1000V
DC Voltage 300V 500V 1000V
Current Range
AC Current
DC Current 250 mA 250 mA 10 A
Functions
Resistance 1 Meg 50K 10 Meg
Decibels (on AC voltage ranges) -20 to +56dB -20 to +56dB -8 to +62dB
Continuity (Audible)
Battery Testing 1.5 & 9V 1.5 & 9V
Specifications
Manual Range Selection 
Total Functions 5 6 7
Total Ranges 12 14 19
Fuse 250 mA 250 mA 500 mA &10A
Accuracy ±5% ±4% ±4%
General
Agency Approval
CAT Rating II 300V II 500V II 1000V
Warranty 1 year 1 year 1 year
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
134
Digital Multimeters
Full family of digital multimeters test AC Voltage, DC Voltage,
Resistance, Continuity, Temperature, Diodes, and Batteries.
• Manual and auto ranging styles.
• Easy to read digital displays.
• All testers include batteries, test leads, and
operating instructions.
• Conforms to UL 61010-1 standards and certified to
CAN/CSA C22.2.
GDT-311 GDT-3190 GDT-3200
BatteriesCircuit Breakers
Magnetic AttachmentBack-Lit Display
Warranty
One Year
Feature GDT-311 GDT-3190 GDT-3200
Voltage Range
AC Voltage 500V 500V 500V
DC Voltage 600V 600V 600V
Functions
Resistance 2 meg Ω2 meg Ω20 meg Ω
Diode Test
Continuity (Audible)
Temperature (Probe type) -40 to 1832°F
Battery Testing 1.5 & 9V 1.5V
Specifications
Manual or Auto Ranging Manual Manual Auto
Total Functions 3 4 7
Total Ranges 13 14 7
Display Count 2000 2000 2000
Low Battery Indicator 
Auto Off 
Rubber Boot 
Magnet Strap
Backlit LCD
General
Agency Approval
Drop Rating 3' 6' 6'
Crush Rating 150lb 150lb 150lb
CAT Rating III 600V III 600V III 600V
Warranty 1 year 1 year 1 year
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
135
Clamp-On Multimeters
Gardner Bender clamp meters test AC Current, AC Voltage, DC
Voltage, Resistance and Continuity.
• Manual and autoranging styles.
• Easy-to-read displays.
• All testers include batteries, test leads and operating
instructions.
• All are cULus or CE approved.
Patented
Warranty
One Year
Warranty
One Year
Voltage (GCM-221)Current (GCM-221)
Voltage (GCM-500)Current (GCM-500)
Feature GCM-500 GCM-221
Voltage Range
AC Voltage 600V 600V
DC Voltage 60V
Current Range
AC Current 600A 600A
Functions
Resistance 1000 Ω200 Ω
Continuity
Audible Buzzer
Specifications
Manual or Auto Ranging Manual Auto
Total Functions 4 3
Total Ranges 8 3
Display Count 1000
Data Hold 
Jaw Size 11/2"1
1/4"
Fuse 500 mA
AC V: ±1.5%
Accuracy ±5% AC A: ±2.0%
Ω: ±1.0%
General
Agency Approval
Drop Rating 3' 6'
Crush Rating 150 Lb 150 Lb
CAT Rating II 600V, III 300V
Warranty 1 year 1 year
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
136
GBT-500A
Analog Battery Tester
Tests all common batteries to determine if they
are charged or need replacement.
• Tests from 1.5 V button cells to 22.5 V photo cells.
• Includes test leads for easy testing.
TESTS
AA, AAA, C, D, N
1.5 V button cells
1.25 V Ni-Cad rechargeable
3 V lithium
22.5 V photo & lantern cells
6 V lantern
12 V, 15 V Photo cells
9 Volt
Warranty
One Year
GBT-3502
Analog Battery Tester
Tests most common household battery types
to determine existing charge.
• Moveable contact arm fits multiple
battery sizes.
• Simple “Low/Good” indicator.
TESTS
AA
AAA
C
D
9 V
1.5 V button cells
Warranty
One Year
Movable contact
arm fits multiple
battery sizes
Test Leads
Replacement leads for Gardner Bender meters.
• Tough ABS construction.
• Flexible cords for easy use.
Part # Description Models
RTL-103 Small Test Leads GMT-319, GDT-311, GDT-3190, GDT-3200
RTL-107 Push-on Alligator Clips RTL-103, RTL-108, RTL-200
RTL-108Mid-size Test Leads GMT-312, GMT-318
RTL-200 Large Test Leads GDT-292A, GDT-293A, GDT-294A, GDT-295A,
GCM-500, GCM-221
RTL-103
RTL-107
RTL-108
RTL-200
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
137
Replacement Parts and Accessories
Test Instruments
10A/250V
0.5A/250V
2.0A/250V
0.2A/250V
0.25A/250V
Batteries
Model
Analog Multimeters
GMT-312 (1) AA
GMT-318 (1) AA
GMT-319 (2) AAA
Digital Multimeters
GDT-311 (1) 9 Volt
GDT-3190 (1) 9 Volt
GDT-3200 (1) 9 Volt
Clamp Meters
GCM-221 (2) AAA
GCM-500 (1) AA
Probe Testers
GAT-3400
GBT-500A
GBT-3502 
GCT-3304 (2) AAA
GCV-3206
GET-3100
GET-3202
GET-3206
GET-3213
GET-4220K (2) AA & (3) LR44
GVD-3504 (1) AAA
GVD-3505 (2) 1.5 V LR44
GVT-392
FUSES
USACustomer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
138
NOTES
CABLE TIES
144
144
144
141
141
With a patented design and high-quality
construction, Gardner Bender cable ties
deliver 50% more tensile strength than
industry standard ties.
139
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
140
Colored . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Grip Strip™ Hook-and-Loop Fasteners . . . . . . . . .144
Heavy Duty (Natural & Ultraviolet Black) . . . . . . .142
Miniature (Natural & Ultraviolet Black) . . . . . . . .141
Mounting Bases and Ties
(Natural & Ultraviolet Black) . . . . . . . . . . .143, 144
Releaseable (Natural & Ultraviolet Black) . . . . . .143
Standard (Natural & Ultraviolet Black) . . . . . . . . .141
Tensioning Tools . . . . . . . . . . . . . . . . . . . . . . . . . .144
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
141
Miniature & Standard Cable Ties
Gardner Bender offers a broad range of cable ties, great for bundling
wire, cable, hoses, ducts and countless other applications.
• Made from durable nylon 6/6 material.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily for
outdoor use.
• Serviceable through temperatures -40 to 85 °C (-40 to 185 °F).
• UL recognized component listing E125869.
• Meets UL 94 V-2 flammability classification.
• Patented DoubleLock™ design has teeth on both sides of the
tie, ensuring 50% greater strength than industry standards.
A
CB
6"
11"
8"
14"
4"
Double Tensile Length Width Thickness Bundle
Length Color Part # Pkg Qty Lock™ Strength A B C Dia. Max. UL
Natural 45-104 40/bag — 18 lb 4" 0.095" 0.035" 3⁄16"UR
Natural 46-104 100/bag — 18 lb 4" 0.095" 0.035" 3⁄16"UR
Natural 46-104M 1,000/bag — 18 lb 4" 0.095" 0.035" 3⁄16"UR
UVB 45-104UVB 30/bag — 18 lb 4" 0.095" 0.035" 3⁄16"UR
UVB 46-104UVB 100/bag — 18 lb 4" 0.095" 0.035" 3⁄16"UR
UVB 46-104UVBM 1,000/bag — 18 lb 4" 0.095" 0.035" 3⁄16"UR
®
E125869
Double Tensile Length Width Thickness Bundle
Length Color Part # Pkg Qty Lock™ Strength A B C Dia. Max. UL
Natural 46-206 100/bag DLOCK 45 lb 6.00" 0.13" 0.055" 13⁄8"—
Natural 46-206M 1,000/bag DLOCK 45 lb 6.00" 0.13" 0.055" 13⁄8"—
UVB 46-206UVB 100/bag DLOCK 45 lb 6.00" 0.13" 0.055" 13⁄8"—
Natural 45-308 20/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
Natural 46-308 100/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
Natural 46-308M 1,000/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
Natural 46-507 500/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
UVB 45-308UVB 15/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
UVB 46-308UVB 100/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
UVB 46-308UVBM 1,000/bag DLOCK 75 lb 8.00" 0.17" 0.055" 2" UR
Natural 45-312 12/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
Natural 46-310 100/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
Natural 46-310M 1,000/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
Natural 46-311 300/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
Natural 46-210 100/bag DLOCK 45 lb 11.00" 0.13" 0.055" 3" —
UVB 45-312UVB 8/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
UVB 46-210UVB 100/bag DLOCK 45 lb 11.00" 0.13" 0.055" 3" —
UVB 46-310UVB 100/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
UVB 46-310UVBM 1,000/bag DLOCK 75 lb 10.90" 0.17" 0.055" 3" UR
Natural 45-315 8/bag DLOCK 75 lb 13.95" 0.17" 0.055" 4" UR
Natural 46-315 100/bag DLOCK 75 lb 13.95" 0.17" 0.055" 4" UR
Natural 46-315M 1,000/bag DLOCK 75 lb 13.95" 0.17" 0.055" 4" UR
UVB 45-315UVB 8/bag DLOCK 75 lb 13.95" 0.17" 0.055" 4" UR
UVB 46-315UVB 100/bag DLOCK 75 lb 13.95" 0.17" 0.055" 4" UR
UVB 46-315UVBM 1,000/bag DLOCK 75 lb 13.95" 0.17" 0.055" 4" UR
Standard
UV
Miniature
TM
TM
TM
3
3
%
S
T
R
O
N
G
E
R
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
142
Heavy-Duty Cable Ties
Heavy-duty design offers 120 and 175 lbs of tensile strength.
• Patented DoubleLock™ design (on 120 lb) ensures 50%
greater tensile strength.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily
for outdoor use.
A
CB
®
E125869
UV
8"
12"
15"
17"
21"
24"
30"
36"
48"
Double Tensile Length Width Thickness Bundle
Length Color Part # Pkg Qty Lock™ Strength A B C Dia. Max. UL
Natural 46-408 100/bag DLOCK 120 lb 8.00" 0.25" .072" 2" UR
UVB 46-408UVB 100/bag DLOCK 120 lb 8.00" 0.25" .072" 2" UR
Natural 46-412 100/bag DLOCK 120 lb 12.00" 0.25" .072" 3" UR
UVB 46-412UVB 100/bag DLOCK 120 lb 12.00" 0.25" .072" 3" UR
Natural 45-515 10/bag DLOCK 120 lb 15.00" 0.25" .072" 4" UR
Natural 46-415 50/bag DLOCK 120 lb 15.00" 0.25" .072" 4" UR
UVB 45-515UVB 10/bag DLOCK 120 lb 15.00" 0.25" .072" 4" UR
UVB 46-415UVB 50/bag DLOCK 120 lb 15.00" 0.25" .072" 4" UR
Natural 45-518 10/bag — 175 lb 17.00" 0.35" .07" 4.90" UR
Natural 46-418 50/bag — 175 lb 16.93" 0.35" .07" 4.90" UR
UVB 46-418UVB 50/bag — 175 lb 16.93" 0.35" .07" 4.90" UR
UVB 45-518UVB 10/bag — 175 lb 17.00" 0.35" .07" 4.90" UR
Natural 45-521 10/bag — 175 lb 20.70" 0.35" .07" 5.5" UR
Natural 46-421 50/bag — 175 lb 20.78" 0.35" .07" 5.51" UR
UVB 46-421UVB 50/bag — 175 lb 20.78" 0.35" .07" 5.51" UR
UVB 45-521UVB 10/bag — 175 lb 20.70" 0.35" .07" 5.5" UR
Natural 45-524 10/bag — 175 lb 23.97" 0.35" .07" 7" UR
Natural 46-424 50/bag — 175 lb 23.97" 0.35" .07" 7" UR
UVB 46-424UVB 50/bag — 175 lb 23.97" 0.35" .07" 7" UR
UVB 45-524UVB 10/bag — 175 lb 23.97" 0.35" .07" 7" UR
Natural 46-330 25/bag — 175 lb 30.50" 0.35" .07" 9" UR
UVB 46-330UVB 25/bag — 175 lb 30.50" 0.35" .07" 9" UR
Natural 45-536 10/bag — 175 lb 35.91" 0.35" .07" 10.30" UR
Natural 46-436 50/bag — 175 lb 35.91" 0.35" .07" 10.30" UR
UVB 45-536UVB 10/bag — 175 lb 35.91" 0.35" .07" 10.30" UR
UVB 46-436UVB 50/bag — 175 lb 35.91" 0.35" .07" 10.30" UR
Natural 45-548 10/bag — 175 lb 48.00" 0.35" .07" 14.30" UR
Natural 46-448 50/bag — 175 lb 48.00" 0.35" .07" 14.30" UR
UVB 45-548UVB 10/bag — 175 lb 48.00" 0.35" .07" 14.30" UR
UVB 46-448UVB 50/bag — 175 lb 48.00" 0.35" .07" 14.30" UR
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
143
Releasable Cable Ties
Temporarily fastens wires, cables and hoses.
• Extended releasable tab in the head makes for easy release
and reusability.
• Great for temporary work or where frequent servicing is required.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily for
outdoor use.
A
CB
Mounting Cable Ties
Secures bundles to walls, studs or other surfaces easily.
• Accepts #10 screws.
• Ultraviolet black (UVB) ties resist harmful light rays – primarily for
outdoor use.
A
CB
Releasable Tab
UV
®
E125869
®
E125869
Double Tensile Length Width Thickness Bundle
Length Color Part # Pkg Qty Lock™ Strength A B C Dia. Max. UL
Natural 47-108 25/bag — 50 lb 8.00" 0.17" 0.05" 1.75" UR
UVB 47-108UVB 25/bag — 50 lb 8.00" 0.17" 0.05" 1.75" UR
16" UVB 47-115UVB 4/bag — 175 lb 15.25" 0.52" 0.09" 4" UR
22" UVB 47-121UVB 3/bag — 175 lb 21.50" 0.52" 0.09" 6" UR
28" UVB 47-127UVB 3/bag — 175 lb 27.75" 0.52" 0.09" 8" UR
8"
UV
14"
Double Tensile Length Width Thickness Bundle
Length Color Part # Pkg Qty Lock™ Strength A B C Dia. Max. UL
Natural 45-308MT 20/bag — 50 lb 8.63" 0.17" 0.055" 2" UR
Natural 48-308 100/bag — 50 lb 8.63" 0.17" 0.050" 13⁄4"UR
UVB 45-308MTUVB 15/bag — 50 lb 8.63" 0.17" 0.055" 2" UR
UVB 48-308UVB 100/bag — 50 lb 8.63" 0.17" 0.055" 13⁄4"UR
Natural 48-315 100/bag — 50 lb 14.63" 0.17" 0.055" 4" UR
UVB 48-315UVB 100/bag — 50 lb 14.63" 0.17" 0.055" 4" UR
8"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
144
Colored Cable Ties
Colored cable ties fasten wire for easy bundle identification.
• Patented DoubleLock™ design ensures 50% more tensile strength
than industry standards.
• Flexible nylon material allows cable ties to remain serviceable
through temperature ranges of -40 to 185 °F (-40 to 85 °C).
• Recognized under component program of UL, E125869.
• Meets flammability classification UL 94 V-2.
A
CB
®
E125869
Mounting Bases
• Adhesive-backed mounting bases for securing wire and
cable bundles.
• Center screw hole for extra holding power.
• Molded with durable nylon 6/6 material.
• Four-sided insertion design for mounting flexibility.
Part # Pkg Qty Size Fits Widths UR Recommended Cable Ties Color
45-MB 5/bag 1" x 1" .10" - .17" UL 18 lbs to 75 lbs Natural
45-MBUVB 5/bag 1" x 1" .10" - .17" UL 18 lbs to 75 lbs Black
MB-20 100/bag 1" x 1" .10" - .17" UL 18 lbs to 75 lbs Natural
UV
Economy Cable Tie Tensioning Tool
Tightens and cuts off cable ties.
• Quick twist snaps off excess length.
• Use for all cable ties up to 75 lbs tensile strength.
• Lightweight, economical.
Part # Description
CTT-45 Economy Cable Tie Tensioning Tool
Grip-Strip™ Hook-and-Loop Fasteners
Reusable strip fastens wires and cables.
• Wrap excess around bundle – no waste.
• Great for home/office, tools and electronics.
• Cinch tab allows attachment to cable or cord.
15"
11"
8"
Length Part # Pkg Qty Color
45-V8BK 5/bag Black
45-V11BK 5/bag Black
45-V15BK 3/bag Black
8"
Double Tensile Length Width Thickness Bundle
Length Color Part # Pkg Qty Lock™ Strength A B C Dia. Max. UL
Flr Blue 45-308FB 20/bag DLOCK 75 lb 8" 0.17" 0.055" 2" UR
Flr Green 45-308FG 20/bag DLOCK 75 lb 8" 0.17" 0.055" 2" UR
Flr Yellow 45-308FY 20/bag DLOCK 75 lb 8" 0.17" 0.055" 2" UR
Green 45-308G 20/bag DLOCK 75 lb 8" 0.17" 0.055" 2" UR
Green 46-308G 100/bag DLOCK 75 lb 8" 0.17" 0.055" 2" UR
STAPLES
148
149
151
150
149
From low voltage wire to service entrance
cables, professionals rely on Gardner
Bender for a complete line of staple and
fastening solutions.
145
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
146
Category 3 & 5 Data Staples . . . . . . . . . . . . . . . . .151
Coaxial Cable Staples . . . . . . . . . . . . . . . . . . . . . .151
Conduit Straps . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Fiber-Insulated Staples . . . . . . . . . . . . . . . . . . . . .152
Insulated Metal Staples . . . . . . . . . . . . . . . . . . . . .148
Low Voltage Wire Staples . . . . . . . . . . . . . . .150, 152
Masonry Staples . . . . . . . . . . . . . . . . . . . . . .150, 151
Metal Staples . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
MultiCable Staples . . . . . . . . . . . . . . . . . . . . . . . .149
Plastic Staples . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Roofing Staples . . . . . . . . . . . . . . . . . . . . . . . . . .151
Service Entrance Staples . . . . . . . . . . . . . . . . . . .148
Service Entrance Straps . . . . . . . . . . . . . . . . . . . .150
Staple Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
147
Romex®is a registered trademark of Southwire Company, Carrollton, GA
Cable Boss™ Staple Gun
• Secures 120V & low-volt cable: Romex®, Coaxial & CAT 5 from the same tool.
• Comfort grip areas for 2-handed operation.
• Easy trigger force.
• Ergonomic handle.
• Secures round and flat cable.
• 3 sizes covering: NM, Coax, Voice/Data, Low Volt.
Comfort & ergonomic handle design
Easy lever action
Rugged construction
Survives 10 ft drop!
Staple refill window to
view remaining staples
Rear guide for added cable
control reduces cable twisting
Reversible cable guide
for easy cable stapling
change over
Front grip area for two
handled operation
MSG-501
Size Part # Pkg Qty Color Application
Voice/Data: CAT 5e
MPS-2080250/box Blue Speaker Wire: 16/2, 16/4, 12/2 (standard and in-wall styles)
Security Wire: 18/4
Coax: RG-6
MPS-2100 200/box White Voice/Data: CAT 6
NM Cable: 14/2, 14/3, 12/2
Coax: RG-6 Quad Shield
MPS-2125 200/box Black NM Cable: 10/2, 12/3
Structured Cabling: Siamese CAT 5e, Siamese CAT 5e and 16/4 Speaker wire
5⁄16"
3⁄8"
1⁄2"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
148
Service Entrance Staples
Secures Service Entrance cables.
• Pointed offset legs drive in straight.
• Will not split wood.
Dims W x L Part # Pkg Qty Application
GSE-15310 10/card
GSE-310 100/box
GSE-15410 10/card
GSE-410 100/box
15⁄8"x 21⁄8"GSE-710 100/box 4/0 SE, Large BX, Romex®, Greenfield
3⁄16"x13⁄8"
11⁄8"x 11⁄2"4/3 and 2/3 SE cable
SEU #6/3 with ground
Metal Staples
Secures Romex®wire and other types of non-metallic (NM) cable.
• Recessed head drives faster and protects cable insulation.
• Pointed legs drive in straight; will not split wood.
• Preferred length.
• Virtually “Oil-Free” for cleaner handling.
• Sharper tips for easy starting.
Dims W x L Part # Pkg Qty Application
MS-1550 24/card
MS-1555 50/card
MS-150 100/box
MS-150J 150/jar 14/2, 12/2, 10/2
MS-500J 500/jar
MS-550 500/box
MS-950B 5,000/bucket
MS-950BU 10,000/bucket
1⁄2"9⁄16"
Dims W x L Part # Pkg Qty Application
MSI-1525 15/card
MSI-50B 50/bag
MSI-150 100/box
MSI-200J 200/jar
MSI-550 500/box
MSI-950B 4,000/bucket
1⁄2"
Insulated Metal Staples
Secures and protects non-metallic (NM), BX, MC, AC and UF cable.
• Insulator made from durable polyethylene.
• Plastic insulator protects cables and helps prevent arc faults.
Dims W x L Part # Pkg Qty Conductor
MS-1575 18/card
MS-1577 50/card
MS-175 100/box
MS-175J 150/jar 14/3, 12/3, 10/3
MS-450J 450/jar
MS-575 500/box
MS-975B 4,000/bucket
14/2 & 12/2 cable
Romex®is a registered trademark of Southwire Company, Carrollton, GA
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
149
Plastic Staples
Secures Romex®, UF and other types of non-metallic (NM) cable.
• Fast and easy to install – both zinc-plated nails drive together
without splitting wood.
• Nail heads are recessed for minimum exposure.
• Smooth saddles prevent damage to insulation.
• UV-resistant polyethylene saddles will not rust, rot or deteriorate.
1⁄2"
Size Part # Pkg Qty Color Application
PS-1550 15/card White
PS-50 50/bag White
PS-150 100/box White
PS-150Z 100/bag White
PS-150ZJ 100/jar White
PS-225J 225/jar White
PS-250 250/bag White
PS-550 500/box White
PS-750B 2,000/bucket White
14 Gauge
14/2, 12/2,
10/2
3⁄4"
Size Part # Pkg Qty Color Application
PS-1575 15/card White
PS-75 50/bag White
PS-175 100/box White
PS-175Z 100/bag White
PS-175ZJ 175/jar White
PS-275 250/bag White
PS-575 500/box White
14/3, 12/3,
10/3
Part # Pkg Qty Stud Type Cable Combinations
MCS-20W 20/box Wood/Metal (8) NM-B Flat 14-2
MCS-100W 100/box Wood/Metal (8) NM-B Flat 12-2
(4) NM-B Flat 10-2
(2) NM-B Round 14-3
(2) NM-B Round 12-3
(10) RG-59
(8) RG-6
(10) CAT-5
MultiCable Staples
Organizes and secures multiple cable runs on a stud.
• Secures NM/Romex®, coaxial and CAT 5 all on the same staple.
• Snap lock gate quickly and easily secures all cables.
• Self-centering tab guides perfect placement on the stud.
• Secures with a nail or staple for wood studs, a screw for
metal studs.
®
®
®
®
Clip-on Plastic Staples
Secures Romex®, UF and other type-NM cable.
• Fast and easy to install – both zinc-plated nails drive together.
• Hardened nails can penetrate cement block, mortar or plaster surfaces.
• Nail heads are recessed for minimum exposure.
• Smooth saddles prevent damage to cable insulation.
• UV-protected polyethylene saddle resists rot, rust and deterioration.
1⁄2"
Size Part # Pkg Qty Type Application
PSM-1550 25/clam Masonry
PSO-1525 25/clam Wood
PSO-1575 25/clam Wood 14/3, 12/3, 10/3
14/2, 12/2, 10/2
3⁄4"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
150
Service Entrance Cable Straps
Plastic insulated straps quickly and easily secure service entrance cable.
• Electro-zinc plated nails provide strength and durability.
• Polyethylene straps stabilized against UV rays and extreme cold;
withstand deterioration and breakage.
Part # Pkg Qty Application
GSE-105 5/card #6 SEU
GSE-170 70/box #6 SEU
GSE-205 5/card #2 SEU
GSE-250 50/box #2 SEU
Part # Pkg Qty Application
GSE-304 4/card #2 SER
GSE-330 30/box #2 SER
GSE-402 2/card #4/0 SEU
GSE-505 5/card #6 SER
Size Dia. Part # Pkg Qty Application
.840" GCC-120 6/card 1⁄2" conduit
1.05" GCC-220 20/bag 3⁄4" conduit
1.315" GCC-310 10/bag 1" conduit
Conduit Plastic Straps
Enables secure fastening of plastic electrical conduit,
schedule 40 PVC, copper tubing, etc.
• Heavy-duty polyethylene resists deterioration from UV rays
and breakage from extreme cold.
®
SER
SEU
Size Dia. Part # Pkg Qty Application
1.66" GCC-410 10/bag 11⁄4" conduit
1.9 " GCC-510 10/bag 11⁄2" conduit
2.375" GCC-610 10/bag 2" conduit
Low Voltage Plastic Staples
Secures bell, speaker, thermostat and
telephone wire.
• For inside and outside applications.
• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist rust and corrosion.
Masonry Low Voltage Staples
Secures bell, speaker, thermostat and
telephone wire.
• Hardened nails can penetrate cement block,
mortar or plaster surfaces.
• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist rust and corrosion.
Size Part # Pkg Qty Color
3⁄16"PMC-1525W 25/clam White
3⁄16"
Size Part # Pkg Qty Color
PLT-1525 25/clam Tan
PLW-1525 25/clam White
PMB-1525 25/card Black
PMW-100 100/box White
PSW-200J 200/jar White
PSB-1600 25/card Black
PSW-1600 25/card White
PSB-160 100/card Black
PSW-160 100/card White
3⁄16"
data
com
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
151
Category 3 & 5 Data Staples
Secures RJ-11, RJ-12, RJ-45, Category 3 and
Category 5 wire.
• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist rust and corrosion.
Part # Pkg Qty Color
PTP-25 25/clam Blue
PTP-250J 300/jar Blue
Masonry Category 3 & 5
Data Staples
Secures and protects RJ-11, RJ-12, RJ-45,
Category 3 and Category 5 wire.
• Hardened nails can penetrate cement block,
mortar or plaster surfaces.
• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist
rust and corrosion.
data
com
data
com
Part # Pkg Qty Color
PTM-25 25/clam Blue
Coaxial Cable Staples
Secures RG-59 and RG-6 coaxial cables.
• UV-resistant polyethylene saddle.
• For indoor and outdoor applications.
• Zinc-plated nails resist rust and corrosion.
1⁄4"
Size Part # Pkg Qty Color
PSB-1650 25/card Black
PSW-1650 25/card White
PSB-165 50/card Black
PSW-165 50/card White
PSB-100 100/box Black
PSW-100 100/card White
PSB-1650PCC-1525 PSG-15
1⁄4"
7⁄16"*
*For RG-8, triaxial and up to 25 pairs UTP cable
Size Part # Pkg Qty Color
PCC-1525 25/clam Black
PCC-300 300/jar Black
PSG-15 15/card Gray
PSG-100 100/box Gray
data
com
1⁄4"
Size Part # Pkg Qty Color
PCS-1525 25/card Black
PCS-100 100/box Black
PCS-1600 25/clam Black
PCS-300B 300/jar Black
Coaxial Roofing Staples
Secures RG-59 and RG-6 coaxial cables.
• Extra-long nail accommodates
roofing applications.
• UV-resistant polyethylene
saddles will not rust, rot
or deteriorate.
• Zinc-plated nails resist
rust and corrosion.
Size Part # Pkg Qty Color
1⁄4 "PSR-25 25/card Black
data
com
data
com
Coaxial Masonry Staples
Secures RG-59 and RG-6 coaxial cables.
• Hardened nails can penetrate cement block,
mortar or plaster surfaces.
• UV-Protected.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
152
Size Part # Pkg Qty Color
1⁄4 "PDS-1525B 25/clam Black
Double Coaxial Masonry Staples
Secures multiple RG-59, RG-59 quad shield,
RG-6 and RG-6 quad shield wire.
• Hardened nails can penetrate cement block,
mortar and plaster surfaces.
• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
Size Part # Pkg Qty Color
1⁄4 "PDC-1525B 25/clam Black
data
com
data
com
Double Coaxial Staples
Secures multiple RG-59, RG-59 quad shield,
RG-6 and RG-6 quad shield wire.
• UV-resistant polyethylene saddles will not rust,
rot or deteriorate.
• Zinc-plated nails resist
rust and corrosion.
Low Voltage
Fiber Insulated Staples
Secures bell, speaker, telephone and
thermostat wire.
• Insulates and protects cable.
Size Part # Pkg Qty Color
MSB-1540 40/card Brown
MSW-1540 40/card White
1⁄8"
Kwik Mount Staples
Fastens and guides wires.
• Wires easily snap in or out of two usable sides.
• Accommodates Category 5 wire.
• Use to secure holiday light sets, sound system
wires, etc.
Size Part # Pkg Qty
7⁄8" x 3⁄16" x 1⁄4"PWS-1525 25/card
WIRE MANAGEMENT
155
156
158
159
161
As the needs of professional
electricians change in managing wire
and cable, Gardner Bender continues
to deliver innovative solutions for
their everyday needs.
153
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
154
Anchor Kit - Plastic Conical . . . . . . . . . . . . . . . . .162
Box Supports/Spacers . . . . . . . . . . . . . . . . .161, 163
Cable Clamps - Plastic . . . . . . . . . . . . . . . . . . . . .158
Cable Clamps - Rubber Insulated . . . . . . . . . . . . .158
Duct Seal Compound . . . . . . . . . . . . . . . . . . . . . .160
Hanger Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Heat-Shrink Tubing - Thin Wall Polyolefin . . . . . .156
Heat-Shrink Tubing - Colored PVC . . . . . . . . . . . .156
Heat-Shrink Tubing - Heavy-Wall . . . . . . . . . . . . .157
Knockout Seals . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Reference Book - "Wiring Simplified" . . . . . . . . . .163
Reference Book - "Ugly's Electrical References" . .163
Screw Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Spiral Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Split Flex Tubing . . . . . . . . . . . . . . . . . . . . . . . . . .157
Stud Insulators . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Tape - Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Tape - Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Tape - Silicone Self-Sealing . . . . . . . . . . . . . . . . .155
Tape - Liquid Electrical . . . . . . . . . . . . . . . . . . . . .155
Wire Markers - Pocket Pack . . . . . . . . . . . . . . . . .161
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
155
Electrical Tape
Quality electrical tape designed for general purpose
electrical applications.
• Made from low-lead PVC material.
• For applications up to 600 V.
• Temp rating up to 80 °C (176 °F).
®
Friction Tape
Black friction tape with matted finish, available in two lengths.
• Matted finish provides the best gripping surface available.
• Use over electrical splices, wrapping grips or sporting goods.
• Available in two lengths: 30' or 60'.
Part # Pkg Qty Description
GTF-300 1/roll 3⁄4" wide, 30' long
GTF-600 1/roll 3⁄4" wide, 60' long
Silicone Self-Sealing Tape
High quality tape that insulates all shapes of conductors to 400 V.
• Insulates and seals surfaces from -65 °C to 260 °C (-85 °F to 500 °F).
• Fuses to itself in seconds to stay watertight.
• Permanent mold in 24 hours or in minutes with heat application.
Liquid Electrical Tape
A liquid coating used to insulate and protect electrical splices
and connections.
• Waterproof, will not unravel or deteriorate like traditional tape.
• Great for home, auto/marine and electrical applications.
• Indoor/outdoor.
• Brush-on applicator included.
Part # Pkg Qty Description
HTP-1010 1/roll 1" wide, 10' long
Part # Pkg Qty Color
LTB-400 4 oz/can Black
LTR-400 4 oz/can Red
Part # Pkg Qty Sleeve Qty Width Length Color
GTP-307 1/roll 10/sleeve 3⁄4" 30' Black
GTP-307D 1/card –– 3⁄4" 30' Black
(w/Dispenser)
GTP-307WD 1/card –– 3⁄4" 30' Black - Weather Resistant
(w/Dispenser)
GTP-607 1/roll 10/sleeve 3⁄4"60' Black
GTP-607P 1/puck –– 3⁄4"60' Black
GTB-667P 1/puck –– 3⁄4"60' Blue
GTN-667P 1/puck –– 3⁄4"66' Brown
GTO-667P 1/puck –– 3⁄4"66' Orange
GTG-667P 1/puck –– 3⁄4"66' Green
GTR-667P 1/puck –– 3⁄4"66' Red
GTW-667P 1/puck –– 3⁄4"66' White
GTY-667P 1/puck –– 3⁄4"66' Yellow
GTPC-512 5/card –– 3⁄4"12' Assorted
(Red, White, Blue, Green, Yellow)
GTPC-550 5/clam –– 1⁄2"20' Assorted
(Red, White, Blue, Green, Yellow)
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
156
Thin-Wall Heat-Shrink Tubing – Polyolefin
Great for cable insulation, marking and bundling, with superior
mechanical, abrasion and moisture protection.
• Flame retardant.
• Resists common fluids and solvents.
• Meets UL 224, 125 °C; CSA C22.2 No. 198.1, 125 °C; MIL-DTL-23053/5,
Class 1 & 2, AMS 3636 & 3637; DEF STAN 59-79, Issue 3 Type 2a.
• Continuous operating temperature: -55 °C (-67 °F) - 135 °C (275 °F).
• Shrink temperature: 120 °C (250 °F) - 250 °C (480 °F).
• 600 V/Mil Dielectric strength.
• 2:1 shrink ratio.
* Sizes shown are approximate and may vary according to manufacturer and insulation system for each wire.
®
* Sizes shown are approximate and may vary according to manufacturer and insulation system for each wire.
PVC
Inside Diameter Conductor Gauge AWG*
Part # Pkg Qty Before Finished Length 24 22 20 1816 14 12 10 8642 1
1/0 2/0 3/0 Color
HST-100 8'/clam 3⁄16"3⁄32"8' ••••• Red
HST-101 8'/clam 1⁄4"1⁄8"8' ••••• Blue
HST-102 8'/clam 5⁄16"5⁄32"8' ••••• Yellow
HST-107 (7)-3" pieces/ 1⁄8", 1⁄4", (7)- Assorted
clam 3⁄8", 1⁄2" 3" pcs (Red, Blue, Yellow)
Polyolefin
Inside Diameter Conductor Gauge AWG*
Part # Pkg Qty Before Finished Length 24 22 20 1816 14 12 10 86421
1/0 2/0 3/0 4/0
HST-093 8 pcs 3⁄32"3⁄64"4" •
HST-125 7 pcs 1⁄8"1⁄16"4" •••
HST-1878 pcs 3⁄16"3⁄32"4" •••••
HST-250 6 pcs 1⁄4"1⁄8"4" •••••
HST-375 3 pcs 3⁄8"3⁄16"4" •••••
HST-500 3 pcs 1⁄2"1⁄4"4" •••••
HST-750 2 pcs 3⁄4"3⁄8"4" ••••••
HST-999 2 pcs 1" 1⁄2"4" •••
HST-AST 8/card 1⁄8", 3⁄16", 1⁄16", 3⁄32", 4"
1⁄4"1⁄8"
Colored Heat-Shrink Tubing – PVC
Great for general-purpose applications.
• Flame retardant.
• Meets UL 224 VW-1; CSA C22.2
No. 198.1 OFT.
• Continuous operating temperature:
-30 °C (-22 °F) - 105 °C (220 °F).
• Shrink temperature: 110 °C (230 °F).
®
HST-101 HST-107
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
157
Inside Diameter
Part # Pkg Qty Before Finished Length
HWT-0722 1/bag 3⁄4"7⁄32"6"
HWT-11381/bag 13⁄32"3⁄8"6"
HWT-1550 1/bag 11⁄2" 1⁄2"6"
®
Heavy-Wall Heat-Shrink Tubing
Provides maximum reliability for insulating and protecting wire,
cables and terminations.
• High impact, abrasion and corrosion resistance.
• Submersible and great for direct burial installations.
• Inner adhesive bonds to plastics, rubber,
neoprene, steel, polyethylene.
• Continuous operating temperature: -55 °C (-67 °F) - 125 °C (257 °F).
• Shrink temperature: 120 °C (250 °F).
Split Flex Tubing
Protects hoses, wire and cables from cuts,
abrasions and UV wear.
• Excellent for managing cords for electronics,
under hood or trailer wiring.
• Corrugated for added flexibility.
• Split down the center for wire breakout where needed.
Part # Inside Dia. Length Color Pkg Qty
FLX-3810 3⁄8" 10' Black 1/bag
FLX-5007 1⁄2" 7' Black 1/bag
FLX-757GR 3⁄4" 5' Gray 1/bag
FLX-1007 1" 5' Gray 1/bag
Spiral Wrap
Manages wire and cable neatly and allows for cable to
break out at desired locations.
• Made from flexible polyethylene.
• Protects cables from cuts, abrasions and UV wear.
Includes:
Part # Description Color Qty Description Inside Dia.
FSP-AST Assorted Clear 1 4' length 3⁄8"
1 4' length 1⁄8"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
158
Part # Size Pkg Qty
PPR-1550 1⁄2" 2 pcs
PPR-1575 3⁄4" 2 pcs
PPR-1600 1" 1 pc
Part # Pkg Qty Description Color
GKK-15386/card Holds 3⁄8" Cable Natural
GKK-1538UVB 6/card Holds 3⁄8" Cable Black
GKK-1550 4/card Holds 1⁄2" Cable Natural
GKK-1575 2/card Holds 3⁄4" Cable Natural
Dimensions
Part # Pkg Qty A dia. BC DE width Color
PPC-1525 18/card 1⁄4"25⁄64"1⁄32"3⁄64"3⁄8" Natural
PPC-1525UVB 18/card 1⁄4"25⁄64"1⁄32"3⁄64"3⁄8" Black
PPC-153815/card 3⁄8"31⁄64"1⁄32"3⁄64"3⁄8" Natural
PPC-1538UVB 15/card 3⁄8"31⁄64"1⁄32"3⁄64"3⁄8" Black
PPC-1550 12/card 1⁄2"35⁄64"3⁄64"3⁄64"3⁄8" Natural
PPC-1550UVB 12/card 1⁄2"35⁄64"3⁄64"3⁄64"3⁄8" Black
PPC-1575 6/card 3⁄4"3⁄64"3⁄32"3⁄64"1⁄2" Natural
PPC-1575UVB 6/card 3⁄4"3⁄64"3⁄32"3⁄64"1⁄2" Black
PPC-1600 4/card 1" 51⁄64"3⁄32"3⁄64"1⁄2" Natural
A
D
B
E
C
A
13/64
Rubber Insulated Clamps
Secures wire and cable in industrial, auto/marine and where vibrations may occur.
• Corrosive-resistant plated steel clamp.
• Flexible 1⁄2" wide body.
• Secure with 1⁄4" screw.
Plastic Kwik Clips
Mount bundles, cables, cords, tools etc. to drywall,
wood and painted surfaces.
• Ratcheting/releasable feature allows adjustment
to a range of bundle diameters.
• Adhesive backed.
Plastic Cable Clamps
Holds harnesses, cables and tubing.
• Used for construction, maintenance and assembly-line operations.
• Use in control cabinets, panels and general applications.
• Tough, durable, yet extremely lightweight.
• Working temperature range: -54 °C (-66 °F) to 170 °C (340 °F).
• Clean, smooth edges for easy handling.
• Fast installation.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
159
Part # Pkg Qty Description
SI-25 25/bag Metal Stud Insulators
®
SEE PG FOR MORE INFO ON
106 Stud Punch
Stud Insulators
One piece design insulating 360° protection for cable runs
through metal studs.
• Fits all pre-punched and field punched hole sizes and configurations.
• Unique folding tabs for fast, one-handed installations.
• Meets NEC article 300-4(b) and CEC rule 12-516.
Knockout Seals (1⁄2" to 4")
Easy-to-use metal knockout seal.
• Fast and easy to install from inside or outside of box.
• Embossed for quick self-centering in unused knockouts.
One screw holds seal in place.
• Made of rust-proofed, cold-rolled galvanized steel.
Screw and bar are zinc-plated.
• Marked for size and catalog number for easy identification.
• 16-gauge steel.
Part # Pkg Qty For Knockout Dia
701 100/box 1⁄2"
701C 5/clam 1⁄2"
702 50/box 3⁄4"
702C 3/clam 3⁄4"
703 25/box 1"
704 25/box 11⁄4"
SEE PG FOR MORE INFO ON
98 Hydraulic Drivers
& Pull Studs
Part # Pkg Qty For Knockout Dia
705 10/box 11⁄2"
706 10/box 2"
707 10/box 21⁄2"
70810/box 3"
709 10/box 31⁄2"
710 10/box 4"
Snap-In Seals (1⁄2" to 2")
Convenient snap-in feature for quick installation.
• Zinc-plated to resist corrosion.
SEE PG FOR MORE INFO ON
101 Knockouts
Part # Pkg Qty For Knockout Dia.
601 100/box 1⁄2"
602 100/box 3⁄4"
603 50/box 1"
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
160
Duct Seal Compound
Seals conduit openings against drafts, dust, moisture and noise.
• Protects terminal boxes, pot heads and bushings from corrosive elements.
• Deadens switch gear panel noise.
• Dough-like compound is easily “thumbed” over holes and gaps.
• Will not harden or form a skin under normal conditions.
• Not for use outdoors.
• Specifications:
- Viscosity: ASTM D-217 300-gram load - 7.0 -11.0; ASTM DS-S2
100-gram load - 9.0 -15.0
- Temperature Range: Adheres at -20 °F (-29 °C). Will not slump after
1 hr. at 350 °F (175 °C).
- Flash Point: Over 550 °F (285 °C).
- Other Properties: Non-conducting, non-deteriorating, non-toxic,
non-corrosive, non-staining, non-curable; 99% solid, coil-based.
Part # Pkg Qty Description
DS-130 30 pugs 1 lb Pugs
DS-530 6 pugs 5 lb Pugs
Galvanized Hanger Strap
For hanging or fastening conduit, pipe
or cables.
• Flexible for easy use.
Part # Pkg Qty Description
GHS-1510 1/card 10' x 3⁄4" x 20 gauge
Saf-Te-Plate™Protectors
Protects cable and plastic pipe from nail punctures.
• Plate attaches to wood studs with a single
hammer blow.
• Required for compliance with NEC 1990
Article 300-4A.
Part # Pkg Qty Description
FP159-3 100/box 11⁄2" x 3" x 16 gauge Metal Safety Plate
FP159-6 50/box 11⁄2" x 6" x 16 gauge Metal Safety Plate
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
161
Pocket Pack Wire Markers
Pocket-sized booklets of cloth wire markers and matching
terminal markers.
• Saves time and money during all on-site and in-plant initial hookup,
troubleshooting, maintenance and repair.
• Nylon-impregnated cloth resists moisture, dirt and oil.
• Non-smear legends assure high visibility for instant,
positive identification.
• Matching terminal marker with every wire marker, plus an extra page
of blank write-on wire and terminal markers for special legends.
Box Supports
Saves time for installing outlet or switch boxes.
• Screwless support for ease of use.
• Simple to use:
1. Mark corners of box position and drill four 1⁄2" holes.
2. Saw between holes to make box opening.
3. Place box into opening.
4. Slip box supports into openings alongside box;
one with long end up, the other down.
5. Bend fingers of box supports into box while firmly
pressing box against wall.
Part # Pkg Qty Description
800 25 sets/box Box Support Set (pair)
®
Part # Marker Legends Qty
42-027 0 - 9 45/ea
42-028A - Z 10/ea
0 - 15 10/ea
Symbols: +, -, / 10/ea
42-029 1 - 45 10/ea
42-030 46 - 90 10/ea
42-035 1 - 15 6/ea
16 - 90 4/ea
A - Z 2/ea
Symbols: +, -, /, 0 2/ea
42-ALPHA Circuit Breaker Box Marker Book
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
162
Part # Pkg Qty Type Contents
SK-832 370 pcs 8-32 Round Head 1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2"
SK-632 370 pcs 6-32 Flat Head 3⁄4", 1", 11⁄4", 11⁄2", 2", 3"
SK-832WP 135 pcs 8-32 Round Head 1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2"
wall plate screws (white, ivory & almond)
14-WPI 10/card Wall Plate Screws Ivory
14-WPW 10/card Wall Plate Screws White
Electrician's Screw Kits
Assorted sizes & lengths of commonly used electrical machine screws.
• Slotted round-head screws for switches, receptacles and
outlet applications.
• Slotted flat-head screws for all-purpose electrical fastening.
Flat-Head Screws Wall-Plate Screws Round-Head Screws Wall-Plate Screws
SK-832WP
“Big Red” Plastic Conical Anchor Kit
Perfect multi-purpose kit for professionals and end-users.
• Tapered end for easy installation.
• Flanged ribs prevent turning or twisting in hole.
• Carbide drill bit included with each kit.
Kit Contains:
Part # Pkg Qty Description
AP4-K100 1 kit Plastic Anchor Kit
Qty Description
100 1⁄4" x 1" Anchors
100 #10 x 1" Slot/Phillips Combo Head Sheet-Metal Screws
11⁄4" Carbide Drill Bit
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com
163
Quick Fix Spacers
Adjusts length of receptacle or switches for proper fit of face plates.
• Four-inch stack of spacers twists apart easily for desired thickness.
Part # Pkg Qty Description
GSP-04 4 strips Spacers
Electrical Reference Books
Reference books that outline safe wiring
recommendations based on the
National Electric Code.
Part # Pkg Qty Description
ERB-UG 1
ERB-WS 1
Ugly's Electrical References -
Revised 2002 Edition
.
A quick, on-the-job reference guide for
the most commonly required information
in an easy-to-read format.
Wiring Simplified 40th Edition
A comprehensive book that translates
the NEC rules into easy-to-understand
explanations on how to complete safe
wiring installs in homes.
USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377
CANADA 905.564.5749 | fax 905.564.0305 |
www.gardnerbender.com
164
NOTES
INDEX - Product Type & Name
165
Alligator Clips..........................................21
Aluminum Mechanical Lugs....................13
Aluminum Splicer-Reducers ...................13
Aluminum Split Bolt Connectors.............12
Anchor Kit - Plastic Conical ..................162
Anti-Oxidant Compound (Ox-Gard™)......14
Battery Charging Clips, Clamps ..............21
Battery Tester (Analog) .........................136
Benders – Aluminum Rigid Conduit
Cyclone™ Electric Bender (B2000) ............34
Gardner®EMT Hand Benders ....................57
One-Shot Hydraulic Benders ...............40-46
Sidewinder®Electric Bender (B2555) .........35
Sidewinder®Mechanical Benders .........52-55
Sweep/Segmental Benders .................44, 46
Ultra Eegor™ Hydraulic Bender .................38
Benders – EMT Conduit
Big Ben™ Hand Benders ..........................56
Cyclone™ Electric Bender (B2000) ............34
Gardner®EMT Hand Benders ....................57
Iron Hand Benders...................................58
Sidewinder®Electric Bender (B2555) .........35
Sidewinder®Mechanical Benders .........52-55
Ultra Eegor™ Hydraulic Bender .................38
Benders – IMC Conduit
Cyclone™ Electric Bender (B2000) ............34
Sidewinder®Electric Bender (B2555) .........35
Sidewinder®Mechanical Benders .........52-55
Ultra Eegor™ Hydraulic Bender .................38
Benders – PVC Conduit
HotBlanket™ Benders ..............................61
HotBox™ Benders ..............................60-61
HotTube™ Bender....................................59
Benders – PVC-Coated Rigid Conduit
Cyclone™ Electric Bender (B2000) ............34
Sidewinder®Electric Bender (B2555) .........35
Sidewinder®Mechanical Benders ........52, 54-55
Benders – Rigid Steel Conduit
Rigid Bender Capacities Chart...................37
Big Ben™ Hand Benders ..........................56
Cyclone™ Electric Bender (B2000) ............34
Gardner®EMT Hand Benders ....................57
Iron Hand Benders...................................58
One-Shot Hydraulic Benders ...............40-46
Sidewinder®Electric Bender (B2555) .........35
Sidewinder®Mechanical Benders .........52-55
Sweep/Segmental Hydraulic Benders ...44, 46
Ultra Eegor™ Hydraulic Bender .................38
Bender Shoe Groups
Sidewinder®Electric Bender (B2555) - IMC ....36
Sidewinder®Electric Bender (B2555) - Rigid ...35
Sidewinder®Electric Bender (B2555) - EMT ....36
Sidewinder®Electric Bender
(B2555) - PVC-Coated........................36
Blower Systems
JetLine®Super Blower™ (Electric) .............66
Super Blo-Vac™ System (Blower/Vacuum) ...67
Box Supports/Spacers ..................161, 163
Bullet Splices ..........................................19
Butt Splices & Kits........................17,19,20
Cable Clamps - Plastic ..........................158
Cable Clamps - Rubber Insulated..........158
Cable Pullers and Accessories
2,000 lb Mini-Brutus™ Powered Puller ......80
8,000 lb Brutus™ Powered Puller..............81
Sub-Assembly Kits........................81-82
Brutus™ Powered Puller
Application Instructions .................83-85
Hook Sheaves.........................................86
Tension Meter .........................................86
Conduit Measuring Tape ..........................73
Cable Ties ......................................141-144
Category 3 & 5 Data Staples.................151
Circuit Alert™.................................111-113
Circuit Alert™ Tester............................. 111
Circuit Alert™ Knife ...............................111
Circuit Alert™ Wire Strippers ..................112
Circuit Alert™ Work Lights .....................112
Circuit Alert™ Pliers ..............................113
Circuit Alert™ Screwdrivers ....................113
CO2 Systems
Air Compressor Seal-Off ..........................71
CO2 Refill Connector ...............................71
Powr House™ Conduit Fishing Systems..............69
Powr-Pak I™ 5 lb. Portable System............70
Powr-Pak II™ 5 lb. Basic System...............70
Coaxial Cable Staples............................151
Colored Cable Ties ................................144
Conduit Straps ......................................150
Continuity Tester
Heavy-Duty ..........................................129
Copper Mechanical Lugs.........................13
Copper Split Bolt Connectors..................12
Crimp Connectors ...................................12
Cutters ...........................................122-123
BX cutter..............................................122
Ratcheting ............................................123
PVC.....................................................123
Datacom/ VDV ...............................118-119
Cable strippers .....................................118
Punch-down .........................................119
Crimpers..............................................119
Disconnects ............................................18
Door Switch ............................................30
Duct Seal Compound ............................160
Fiber-Insulated Staples..........................152
Fish Sticks
12’ Fish Ease™ .......................................79
15’ Glo Fish™.........................................79
Fish Tapes and Accessories
Cable Snake™ Flat Wire Tape ...................76
Cable Snake™ Steel Fish Tapes ...........75-76
Economy Fish Tape..................................77
Fiberline™ Non-Conductive
Fiberglass Fish Tapes..........................77
Fish Tape Ball .........................................79
Fish Tape Leader .....................................78
Nylo-Flex™ Non-Conductive Nylon Fish Tapes .78
Replacement Tapes - Steel........................77
Rewind™ Fish Tape Winder ......................75
Streamline™ Steel Fish Tapes ...................75
UpperHand™ Steel Fish Tapes ..................74
UpperHand™ Non-Conductive
Fiberglass Fish Tapes..........................74
Fuse Puller ............................................124
GB Xtreme™ Lugs...................................14
GB Xtreme™ Terminals ...........................17
Grip Strip™ Hook-and-Loop Fasteners .144
Grounding Accessories ...........................14
Grounding Connectors (GreenGard™) ....10
Guide to Bending Booklet .......................62
Hand Benders
Big Ben™ Hand Benders..........................56
Gardner®Thinwall Hand Benders...............57
Iron Hand Benders...................................58
Handles .................................................59
Hickey Bending Heads .............................59
Hanger Strap.........................................160
Heat-Shrink Tubing - Colored PVC........156
Heat-Shrink Tubing - Heavy-Wall ..........157
Heat-Shrink Tubing - Thin Wall Polyolefin ..156
Heavy Duty Cable Ties
(Natural & Ultraviolet Black) ..............142
Hi-Temp Black Connectors........................8
Hydraulic Bender Accessories.................50
Hydraulic Cylinder Specifications............51
Insulated Metal Staples.........................148
Knives ...........................................111, 124
Knockout Seals .....................................159
Low Voltage Wire Staples.............150, 152
Lubricants
Wire-Aide™ ...........................................86
Poly-Gel™..............................................87
Super-Slick™..........................................88
Masonry Staples ...........................150, 151
Material Handling
Hoist Lift (Hi-Hoist™)..............................94
Reel Rollers
30" Reel Roller...................................91
Handy-Saver™ Reel Roller...................91
Reel Jacks - Telescoping ..........................91
Wire Caddies & Carts
Deluxe Spool Cart & Caddy Combo .......93
Hand Wire Caddy ................................92
Heavy-Duty Spool Cart &
Caddy Expander Combo...................93
Portable Wire Caddy ............................92
Portable Wire Dispenser .......................94
Replacement Parts ...............................94
Spool Caddy Cart ................................92
Wire Dispenser....................................93
Metal Staples ........................................148
Miniature Cable Ties
(Natural & Ultraviolet Black) ..............141
Mounting Bases and Ties
(Natural & Ultraviolet Black)......143, 144
MultiCable Staples ................................149
Multimeters - Analog ............................133
Analog Multimeters Comparison Chart.........133
Five Function, 12-Range .......................133
Six Function, 14-Range .........................133
Seven Function, 19-Range ....................133
Multimeters - Clamp-On .......................135
Clamp-On Comparison Chart .................135
AC Clamp Meter with Lockjaw ................135
Auto-Ranging Digital .............................135
NAME PG NAME PG NAME PG
INDEX - Product Type & Name
166
Multimeters - Digital .............................134
Digital Multimeters Comparison Chart..........134
Three Function, 13-Range .....................134
Four Function, 14-Range .......................134
Seven Function, 7-Range Auto-Ranging ........134
Multi-Range Connectors (Hex-Lok™) .......9
Non-Contact Voltage Testers.................130
Non-Contact Voltage Testers
Comparison Chart ..............................130
Circuit Alert™ .......................................130
Live-Wire™ ..........................................130
Pigtail Connectors...................................11
Plastic Staples.......................................149
Pliers ............................................120 -121
Long Nose............................................120
Linemen’s.............................................121
Pull-Chain Switches ...........................28,29
Pull Line / Line Carriers
Foam Line Carriers..................................72
Heavy-Duty Bulk Nylon Line .....................73
Inflatables®Line Carriers..........................71
Missile Line Carriers ...............................71
Poly-Pull™ Line......................................73
Power Saver™ Line Packages ...................72
Tag Along™ Line Packages.......................72
Pumps
Economy Electric.....................................48
Manual Hydraulic ....................................49
Submerged Electric..................................48
Z-Class Electric.......................................47
Push-Button Switches........................27,28
Push-In Connectors (PushGard™)..........11
PVC Plug Sets.........................................61
Receptacle Testers/Analyzers
Receptacle Testers/Analyzers
Comparison Chart ..............................131
Lan Tracker™........................................132
Receptacle Tester & Circuit Analyzer ........131
GFCI & Circuit Analyzer .........................131
Reference Book - "Ugly's Electrical
References"........................................163
Reference Book - "Wiring Simplified"....163
Releaseable Cable Ties
(Natural & Ultraviolet Black) ..............143
Ring Terminals ...................................17,18
Rocker Switches .....................................29
Roofing Staples.....................................151
Rope
Rope Selection Guide ..............................90
Poly-Pro™ General Purpose Rope .............89
Super Tuff-Pull™ Double Braided Rope ......88
Tuff-Pull™ Single Braided Rope ................89
Rotary Switches......................................30
Screwdrivers .........................................123
Screw Kits.............................................162
Seals .....................................................159
Service Entrance Staples.......................148
Service Entrance Straps........................150
Slug-Out™ Knockouts
35 Ton Hydraulic Punch.........................102
Draw Studs ...................................104-105
Hydraulic Slug-Out™ Sets...................97-98
Individual Components ..................101, 105
Mechanical Slug-Out™ Sets..............99-100
Notching Pliers .....................................102
Super Stainless Steel
Slug-Out™ Sets .......................103, 106
Spade Terminals......................................17
Spiral Wrap ...........................................157
Split Flex Tubing....................................157
Standard Cable Ties
(Natural & Ultraviolet Black) ..............141
Staple Gun ............................................147
Step Bits ...............................................107
Storage Cases (Tool Guard) ....................62
Straight-Sided Connectors (WireGard™) ..7
Stud Insulators .....................................159
Stud Punch ...........................................106
Table (Bend-Mate™ Bender
Table for Ultra Eegor™) ..................39
Tape - Electrical.....................................155
Tape - Friction .......................................155
Tape - Liquid Electrical..........................155
Tape - Silicone Self-Sealing ..................155
Tap Splices..............................................19
Tensioning Tools ...................................144
Tester Leads..........................................136
Tester Replacement Parts
(fuses, batteries)................................137
Toggle Switch Cover ...............................27
Toggle Switches .................................26,27
Underground UF Splice Kit......................20
Universal Connectors (Uni-Lok™)...........10
Vacuum / Blowers
Super Blo-Vac™ System......................67
Voltage Testers ..............................127-129
Voltage Testers Comparison Chart ...........127
6-way Circuit ........................................128
Heavy-Duty 3-way ................................128
Low Voltage Twin Probe .........................127
Screwdriver, Voltage Probe &
Continuity Tester ................................128
Solenoid ..............................................129
Winged Connectors (WingGard™) ............8
Wire ........................................................21
Wire Markers - Pocket Pack..................161
Wire Strippers ...............................114-117
Multi-tool.............................................116
Cable Rippers .......................................117
Romex
®
is a registered trademark of the
Southwire Company, Carrollton, GA
NAME PG NAME PG
INDEX - Part #
167
601 ......................159
602 ......................159
603 ......................159
701 ......................159
702 ......................159
703 ......................159
704 ......................159
705 ......................159
706 ......................159
707 ......................159
708 ......................159
709 ......................159
710 ......................159
740 ........................94
800 ......................161
820 ........................59
821 ........................59
822 ........................59
920 ........................58
921 ........................58
922 ........................58
923 ........................58
932 ........................57
933 ........................57
950 ...................68,69
960 ........................56
961 ........................56
962 ........................56
1102 ......................70
1142 .................69,70
1206 ......................69
1208 .................68,69
1215 .................69,70
1216 .................69,70
1505 ......................70
1525 ......................67
12568 ....................67
126025 ..................66
10-001 .....................7
10-002 .....................7
10-003 .....................7
10-003HT ................8
10-004 .....................7
10-004HT ................8
10-006 .....................7
10-084 .....................8
10-086 .....................8
10-089 .....................8
10-095 ...................10
10-100 ...................19
10-103 ...................18
10-104 ...................18
10-106 ...................18
10-107 ...................18
10-108 ...................18
10-111 ...................17
10-112 ...................17
10-113 ...................17
10-114 ...................17
10-116 ...................17
10-121 ...................19
10-123 ...................19
10-126 ...................19
10-141F.................18
10-143F.................18
10-145F.................18
10-151F.................18
10-153F.................18
10-153P.................18
10-155F.................18
10-1G1 ..................10
10-1H1.....................9
10-2G2 ..................10
10-2H2.....................9
10-310 ...................12
10-310C.................12
10-311 ...................12
10-311C.................12
10-410 ...................12
10-410C.................12
10-411 ...................12
10-411C.................12
10-PC2 ..................11
10-PC3 ..................11
10-PC4 ..................11
10-PC8 ..................11
1103N...............68,70
1105A....................69
12-001 .....................7
12-001BU ................7
12-002 .....................7
12-002BU ................7
12-003BU ................7
12-004BU ................7
12-006BU ................7
12-084BU ................8
12-086BU ................8
12-1G1BU .............10
12-1H1BU................9
12-2G2BU .............10
12-2H2BU................9
13-003 .....................7
13-004 .....................7
13-006 .....................7
13-084 .....................8
13-086 .....................8
13-089 .....................8
13-095 ...................10
13-1G1 ..................10
13-1H1.....................9
13-2G2 ..................10
13-2H2.....................9
13-410 ...................12
14-075 ...................21
14-076 ...................21
14-077 ...................21
14-078 ...................21
14-095 ...................18
14-096 ...................18
14-097 ...................18
14-098 ...................18
14-099 ...................18
14-505 ...................21
14-510 ...................21
14-520 ...................21
14-530 ...................21
14-550 ...................21
14-610 ...................21
14-630 ...................21
14-GRC .................14
14-WPI ................162
14-WPW..............162
16-001 .....................7
16-002 .....................7
16-003 .....................7
16-003M ..................7
16-004 .....................7
16-006 .....................7
16-084 .....................8
16-084M ..................8
16-086 .....................8
16-086L ...................8
16-095 ...................10
16-1H1.....................9
16-1H1L...................9
16-8486 ...................8
16-8486M ................8
17-003 .....................7
17-004 .....................7
17-006 .....................7
17-084 .....................8
17-086 .....................8
17-1H1.....................9
19-001 .....................7
19-002 .....................7
19-003 .....................7
19-004 .....................7
19-006 .....................7
19-084 .....................8
19-086 .....................8
19-089 .....................8
19-095 ...................10
19-1G1 ..................10
19-1H1.....................9
19-2G2 ..................10
19-2H2.....................9
19-AWC...................7
19-AWW ..................8
19-PC2 ..................11
19-PC3 ..................11
19-PC4 ..................11
19-PC8 ..................11
20-089 ...................11
20-090 ...................11
20-100 ...................19
20-102 ...................18
20-103 ...................18
20-104 ...................18
20-105 ...................18
20-106 ...................18
20-107 ...................18
20-108 ...................18
20-111 ...................17
20-112 ...................17
20-113 ...................17
20-114 ...................17
20-116 ...................17
20-121 ...................19
20-1210 .................19
20-123 ...................19
20-126 ...................19
20-141F.................18
20-141M ................18
20-143F.................18
20-143M ................18
20-145F.................18
20-145M ................18
20-151P.................18
20-153P.................18
20-161P.................19
20-163P.................19
20-2218 .................19
20-410 ...................12
20-411 ...................12
21-100 ...................19
21-101 ...................18
21-102 ...................18
21-103 ...................18
21-104 ...................18
21-105 ...................18
21-1055 .................18
21-106 ...................18
21-107 ...................18
21-108 ...................18
21-109 ...................18
21-111 ...................17
21-112 ...................17
21-113 ...................17
21-114 ...................17
21-116 ...................17
21-121 ...................19
21-123 ...................19
21-126 ...................19
21-141F.................18
21-141M ................18
21-143F.................18
21-143M ................18
21-145F.................18
21-145M ................18
21-146F.................18
21-146M ................18
21-151F.................18
21-151M ................18
21-153F.................18
21-153M ................18
21-155F.................18
21-155M ................18
21-161F.................19
21-161M ................19
21-163F.................19
21-163M ................19
21-2218 .................19
25-001 .....................7
25-002 .....................7
25-003 .....................7
25-004 .....................7
25-006 .....................7
25-084 .....................8
25-086 .....................8
25-089 .....................8
25-095 ...................10
25-1G1 ..................10
25-1H1.....................9
25-2G2 ..................10
25-2H2.....................9
25-AWC...................7
25-AWW ..................8
27-003 .....................8
27-004 .....................8
42-027 .................161
42-028 .................161
42-029 .................161
42-030 .................161
42-035 .................161
42-ALPHA ...........161
45-104 .................141
45-104UVB..........141
45-308 .................141
45-308FB.............144
45-308FG ............144
45-308FY.............144
45-308G ..............144
45-308MT............143
45-308MTUVB.....143
45-308UVB..........141
45-312 .................141
45-312UVB..........141
45-315 .................141
45-315UVB..........141
45-515 .................142
45-515UVB..........142
45-518 .................142
45-518UVB..........142
45-521 .................142
45-521UVB..........142
45-524 .................142
45-524UVB..........142
45-536 .................142
45-536UVB..........142
45-548 .................142
45-548UVB..........142
45-MB..................144
45-MBUVB ..........144
45-V11BK............144
45-V15BK............144
45-V8BK..............144
46-104 .................141
46-104M ..............141
46-104UVB..........141
46-104UVBM.......141
46-206 .................141
46-206M ..............141
46-206UVB..........141
46-210 .................141
46-210UVB..........141
46-308 .................141
46-308G ..............144
46-308M ..............141
46-308UVB..........141
46-308UVBM.......141
46-310 .................141
46-310M ..............141
46-310UVB..........141
46-310UVBM.......141
46-311 .................141
46-315 .................141
46-315M ..............141
46-315UVB..........141
46-315UVBM.......141
46-330 .................142
46-330UVB..........142
46-408 .................142
46-408UVB..........142
46-412 .................142
46-412UVB..........142
46-415 .................142
46-415UVB..........142
46-418 .................142
46-418UVB..........142
46-421 .................142
46-421UVB..........142
46-424 .................142
46-424UVB..........142
46-436 .................142
46-436UVB..........142
PART #PGPART #PGPART #PGPART #PGPART #PG
INDEX - Part #
168
46-448 .................142
46-448UVB..........142
46-507 .................141
47-108 .................143
47-108UVB..........143
47-115UVB..........143
47-121UVB..........143
47-127UVB..........143
48-308 .................143
48-308UVB..........143
48-315 .................143
48-315UVB..........143
79-002 ...................86
79-003 ...................86
79-006 ...................86
79-201 ...................87
79-202 ...................87
79-203 ...................87
79-301 ...................87
79-401 ...................88
79-402 ...................88
79-403 ...................88
920H......................58
921H......................58
922H......................58
930B......................57
930H......................57
931B......................57
931H......................57
932H......................57
960H......................56
961H......................56
962H......................56
A12........................50
A29........................50
A630......................50
AML-200................14
AML-201................14
AML-202................14
AML-203................14
AML-204................14
AML-205................14
AML-206................14
AML-207................14
AML-208................14
AMT-100 ................17
AMT-103 ................17
AMT-106 ................17
AMT-108 ................17
AMT-110 ................17
AMT-113 ................17
AMT-116 ................17
AMT-120 ................17
AMT-121 ................17
AMT-123 ................17
AMT-124 ................17
AMT-126 ................17
AMT-127 ................17
AMW-312 ..............21
AMW-314 ..............21
AMW-316 ..............21
AMW-318 ..............21
AMW-322 ..............21
AMW-324 ..............21
AMW-326 ..............21
AMW-328 ..............21
AMW-332 ..............21
AMW-334 ..............21
AMW-336 ..............21
AMW-338 ..............21
AP4-K100............162
B1021028..............39
B2000....................34
B2555....................35
B2555EMT ............35
B2555IMC .............35
B2555PVC.............35
B2555RIG..............35
B26...................66,67
B3000....................66
B306S...............37,44
B306SPE22J.........44
B306SPH80...........44
B308S...............37,41
B308SPE22J.........41
B308SPH80...........41
B316S...............37,40
B316SPE22J.........40
B316SPH39...........40
B340S...............37,42
B340SP208J .........42
B340SPE22J.........42
B340SPH80...........42
B343S...............37,45
B343SP408J .........45
B343SP408K.........45
B343SP408S.........45
B343SPH84...........45
B350.................42,45
B351S...............37,46
B351SP408J .........46
B351SP408S.........46
B351SPH84...........46
B359S...............37,43
B359SP208J .........43
B359SPH80...........43
B400DL .................38
B400DLP408S.......38
B400L....................38
B400LP408S .........38
B60...................65,66
BB2030..................61
BB3040..................61
BB5150..................61
BE400....................39
BEMT-52................36
BF41......................52
BF42......................52
BF43......................52
BF47......................52
BF48......................52
BF49......................52
BF52......................52
BF90......................52
BFB2500 ...............38
BFB3000 ...............38
BFB3500 ...............38
BFB4000 ...............38
BH-100 ..................59
BH-125 ..................59
BH-75 ....................59
BHB-520D .............60
BHB-540A .............60
BHB-560................61
BHB-560P .............61
BHE-50K ...............60
BHE-540................60
BHE-560................61
BHT-520A ..............59
BIMC-152 ..............36
BPVC-52 ...............36
BR12515 ..........52,53
BR20000 ...............52
BR57510 ..........52,53
BRIG-52 ................35
BS2500..................38
BS3000..................38
BS3500..................38
BS4000..................38
BT12515................52
BT2000.............52,55
BT57510................52
BTI12520...............52
BV12......................67
BV1281..................67
BV208DA..........65,67
BV23......................67
BV24.................66,67
BVS-240................61
BW11.....................53
BW12.....................53
BW15.....................53
BW20.....................54
BW201...................55
BW20S ..................54
BW221...................55
BW221S ................55
BW27.....................55
BW27S ..................55
BW30.....................54
BW30S ..................54
BWF888 ...............52,
....................53,54,55
BZ12011................40
BZ12021................40
BZ12031...........40,41
BZ12041...............40,
..........41,42,43,45,46
BZ12051...............40,
..........41,42,43,45,46
BZ12061...............40,
..........41,42,43,45,46
BZ12071................40
BZ12091...............40,
..........41,42,43,45,46
BZ12341...............42,
....................43,45,46
BZ12351...............42,
....................43,45,46
BZ12371................40
BZ12372...........41,44
BZ12374................42
BZ12375................40
BZ12376...............41,
....................42,44,45
BZ12377...............40,
.....41,42,43,44,45,46
BZ12379................44
BZ12380................44
BZ12381................44
BZ12382...........41,44
BZ12383...........41,44
BZ12384...........41,44
BZ12385...........41,44
BZ12386...........43,46
BZ12388...........43,46
BZ12389...........43,46
BZ12390...........43,46
BZ12391...............42,
....................43,45,46
BZ12392...............42,
....................43,45,46
BZ13401...............41,
....................42,44,45
BZ28......................38
BZ34......................38
BZ39......................38
BZ44......................38
BZ74......................38
BZ78......................38
C604......................50
CAM-10 ...............111
CB21V...................71
CD1012 .................51
CD3014 ............45,51
CD3028 ................38
CD3028KT.............38
CD308 ...................51
CD411 ...................50
CF859489..............39
CF860013..............39
CF861108..............39
CF862281..............39
CF863104..............39
CH1211 .....51,97,103
CH204028 .............39
CH819044 .............39
CH951044 .............39
CK211950 .............39
CK212950 .............39
CK579281 .............39
CM16.....................82
CM191044.............39
CM193350.............39
CM194900.............39
CM20...........38,62,81
CM260281.............52
CM4..................40,62
CM5.......................97
CM7......................41,
.....42,43,44,45,46,62
CP10 .....................82
CP1002 .................82
CP15 .....................82
CP2000 .................80
CP2000M ..............80
CP503 ..............81,82
CP504 ...................82
CP505 ..............81,82
CP600 ...................82
CP601 ..............81,82
CP622 ..............81,82
CP630 ...................82
CP631 ..............81,82
CP700 ...................82
CP701 ..............81,82
CP702 ..............81,82
CP703 ..............81,82
CP704 ...................82
CP705 ...................82
CP706 ..............81,82
CP707 ..............81,82
CP708 ..............81,82
CP709 ..............81,82
CP80 ................81,82
CP800 ..............81,82
CP8000 .................81
CP8000D...............81
CP8001 .................81
CP801 ...................82
CP806 ...................82
CP807 ...................82
CR-100................117
CR-1000..............117
CRC-100 .............117
CS1010 ............40,51
CS106 ...................51
CS2510 .......41,44,51
CS2514 .......42,43,51
CS400 ..............38,39
CTT-45.................144
DC404 ...................38
DS-130 ................160
DS-530 ................160
E507......................62
EFT-21P ................76
EFT-50B ................77
ERB-UG ..............163
ERB-WS..............163
F125 ......................71
F125B....................70
F250 ......................71
F250B....................70
F400 ......................71
F400B....................66
F600 ......................71
FC1..............69,70,72
FC10.................69,72
FC11.................69,72
FC1-10 ..................67
FC12.................69,72
FC2..............69,70,72
FC2..............69,70,72
FC3...................69,72
FC4...................69,72
FC5...................69,72
FC6...................69,72
FC7...................69,72
FC8...................69,72
FC9...................69,72
FLT-10..................112
FLT-20..................112
FLX-1007.............157
FLX-3810.............157
FLX-5007.............157
FLX-757GR .........157
FP159-3...............160
FP159-6...............160
FPE-20 ................124
FSP-AST .............157
FTB-10 ..................78
FTF-200.................77
FTL-5.....................78
FTN-100R..............74
FTS-100GR...........75
FTS-125R..............74
FTS-200GR...........75
FTS-250R..............74
PART #PGPART #PGPART #PGPART #PGPART #PG
INDEX - Part #
169
FTS-50B................76
FTS-65R................74
FTW-10 .................75
FTX-12L ................79
FTX-15GL..............79
GAK-1/0.................12
GAK-2....................12
GAK-2/0.................12
GAK-4/0.................12
GAT-3400............127,
.....................129,137
GBRX-301...........122
GBT-3502 .....136,137
GBT-500A.....136,137
GBX-300..............122
GBX-TK.................17
GC-1000..............122
GC-375................122
GC-500................122
GCC-120 .............150
GCC-220 .............150
GCC-310 .............150
GCC-410 .............150
GCC-510 .............150
GCC-610 .............150
GCM-221......135,137
GCM-500......135,137
GCP-3400 ...........121
GCT-3304 ...........127,
.....................129,137
GCV-3206...........127,
.....................128,137
GDT-311 .......134,137
GDT-3190 .....134,137
GDT-3200 .....134,137
GES-224..............114
GES-55................114
GESP-224 ...........114
GESP-55 .............114
GESP-70 .............114
GET-3100 .....127,137
GET-3202 .....127,137
GET-3206 ...........127,
.....................128,137
GET-3213 ...........127,
.....................128,137
GET-4220K...132,137
GFI-3501 .............131
GGC-1014C ..........14
GGC-1508.............14
GGP-1261 .............14
GGP-1273 .............14
GGP-1282 .............14
GGP-1461 .............14
GGP-1502 .............14
GGS-1032HC........14
GGS-1512R...........14
GHS-1510 ...........160
GKC-100A...........123
GKK-1538............158
GKK-1538UVB ....158
GKK-1550............158
GKK-1575............158
GMC-1145...........119
GMC-2000L1.......119
GMT-312.......133,137
GMT-318.......133,137
GMT-319.......133,137
GPC-200 .............123
GPS-3214............121
GPS-3219............121
GPS-3220............120
GPS-3228............120
GPS-3238............120
GPT-70 ................113
GPT-80 ................113
GPT-90 ................113
GRC-750 .............123
GRT-3500 ............131
GRX-3224 ...........117
GS-355................115
GS-359................118
GS-360................115
GS-361................115
GS-365................116
GS-366................117
GS-370................116
GS-385................120
GS-386................120
GS-387................121
GS-388................122
GS-394................116
GS-40..................115
GSBC-1/0..............12
GSBC-2.................12
GSBC-2/0..............12
GSBC-3/0..............12
GSBC-4.................12
GSBC-6.................12
GSBC-8.................12
GSE-105..............150
GSE-15310..........148
GSE-15410..........148
GSE-170..............150
GSE-205..............150
GSE-250..............150
GSE-304..............150
GSE-310..............148
GSE-330..............150
GSE-402..............150
GSE-410..............148
GSE-505..............150
GSE-710..............148
GSLU-125 .............13
GSLU-25 ...............13
GSLU-35 ...............13
GSLU-70 ...............13
GSP-04................163
GSPA-0..................13
GSPA-2..................13
GSPA-4/0...............13
GST-224M ...........112
GST-55M .............112
GST-70M .............112
GSW-10.................26
GSW-11.................26
GSW-110...............26
GSW-114...............27
GSW-117...............26
GSW-12 ................26
GSW-120...............26
GSW-121...............26
GSW-123...............26
GSW-124...............26
GSW-125...............26
GSW-125BP..........26
GSW-13.................26
GSW-14.................26
GSW-15.................26
GSW-16.................26
GSW-17.................26
GSW-18.................26
GSW-19.................27
GSW-20.................27
GSW-21.................28
GSW-22.................27
GSW-23.................27
GSW-24.................28
GSW-24BP............28
GSW-25.................28
GSW-26.................30
GSW-31.................28
GSW-31BP............28
GSW-32.................28
GSW-32BP............28
GSW-33.................29
GSW-34.................29
GSW-35.................28
GSW-39.................29
GSW-41.................29
GSW-42.................29
GSW-45.................29
GSW-48.................29
GSW-49.................29
GSW-61.................30
GSW-62.................30
GSW-63B ..............30
GSW-68.................30
GSW-69.................30
GSW-69BP............30
GSW-SK................30
GTA-2 ....................13
GTA-2/0 .................13
GTB-406................19
GTB-408................19
GTB-410................19
GTB-667P ...........155
GTF-300..............155
GTF-600..............155
GTG-667P...........155
GTN-667P ...........155
GTO-667P ...........155
GTP-307..............155
GTP-307D ...........155
GTP-307WD........155
GTP-607..............155
GTP-607P ...........155
GTPC-512 ...........155
GTPC-550 ...........155
GTPS-100 ...........118
GTPS-200 ...........118
GTR-667P ...........155
GTW-667P ..........155
GTY-667P............155
GVD-3504 ..........127,
.....................130,137
GVD-3505 ..........127,
.....................130,137
GVT-392 .............127,
.....................129,137
H8210....................50
H864..........50,97,103
HC913 ..................40,
41,42,43,44,45,46,50
HC927 ...................38
HC927 ...................50
HC963 ...................50
HF100....................50
HF101....................50
HS-8512 ......81,82,86
HS-8518 ................86
HS-8524 ................86
HSB-28..................20
HST-093 ..............156
HST-100 ..............156
HST-101 ..............156
HST-102 ..............156
HST-107 ..............156
HST-125 ..............156
HST-1300 ..............20
HST-187 ..............156
HST-250 ..............156
HST-375 ..............156
HST-500 ..............156
HST-750 ..............156
HST-999 ..............156
HST-AST .............156
HST-WP.................20
HTP-1010............155
HWT-0722 ...........157
HWT-1138 ...........157
HWT-1550 ...........157
JLP10 ....................78
JLP5 ......................78
JO225LC ..........68,69
JO25.................68,70
JO25A ...................70
JO25CA............68,70
JV07 ......................67
JV08 ......................67
JV09 ......................67
JV12 ......................67
JV210 ....................67
K88001................100
K88004................100
K88007...........99,106
K88008................100
K88020......98,99,103
KC3540 ..........97,104
KD1000B..............97,
...........98,99,100,101
KD1250B..............97,
...........98,99,100,101
KD1500B..............97,
...........98,99,100,101
KD2000B..............97,
...........98,99,100,101
KD2500 ...97,100,101
KD3000 ...97,100,101
KD3500 ...97,100,101
KD4000 ...97,100,101
KD500B................97,
...........98,99,100,101
KD750B................97,
...........98,99,100,101
KDS1000......103,106
KDS1250......103,106
KDS1500.............103
KDS2000.............103
KDS500........103,106
KDS750........103,106
KF-200.................124
KKT316 ...............101
KLP2......................98
KLP6......................98
KOF520 .................97
KOF540 .................97
KOH14A ................97
KOH2540.............100
KOH520A ..............97
KOH540A ..............97
KOM152 ..............100
KOM1732 ............101
KOM200 ..............101
KOM250 ..............101
KOM300 ..............101
KOM350 ..............101
KOM400 ..............101
KOM50125 ..........100
KOR14...................99
KOR152..........99,104
KOR50............99,104
KOR520.................99
KOR75125......99,104
KOS-1000B .........101
KOS-1250B .........101
KOS-1250DS.......101
KOS-1500B .........101
KOS-1500DS.......101
KOS-500B ...........101
KOS520.................98
KOS5290...............98
KOS-750B ...........101
KOW520 ................99
KP1000B ..............97,
...........98,99,100,101
KP1250B ..............97,
...........98,99,100,101
KP1500B ..............97,
...........98,99,100,101
KP1732B .............101
KP2000B ..............97,
...........98,99,100,101
KP2500....97,100,101
KP3000....97,100,101
KP3500....97,100,101
KP4000....97,100,101
KP500B ................97,
...........98,99,100,101
KP750B ................97,
...........98,99,100,101
KPR7520..............98,
.....................103,104
KPR7540..............97,
.....................103,104
KPS1000 ......103,106
KPS1250 ......103,106
KPS1500 .............103
KPS2000 .............103
KPS50 ..................97,
................98,103,104
KPS500 ........103,106
KPS750 ........103,106
KS752B ................99,
.......100,101,105,106
KSA50 .....98,103,104
KSB50B................99,
.......100,101,105,106
KSN2530......101,105
PART #PGPART #PGPART #PGPART #PGPART #PG
INDEX - Part #
170
KSN3540......101,105
KSS520 ...............103
KSS520A.............103
KW52.....................99
LP1701 .................73
LP1701B................70
LP1702B................70
LP1703..................70
LP1722..................73
LP2150...67,69,70,72
LP2206T......67,69,72
LP2207T......67,69,72
LP2208T...........69,72
LP3200.............69,70
LP3200B................67
LP3300.............69,72
LP3450.............67,72
LP4200..................67
LP4300 .......69,70,72
LP4450.............67,72
LTB-400 ...............155
LTR-400...............155
M2000 ...................71
M3000 ...................71
M4000 ...................71
M5000 ..............66,71
M6000 ..............66,71
MB-20..................144
MCS-100W..........149
MCS-20W............149
MPS-2080 ...........147
MPS-2100 ...........147
MPS-2125 ...........147
MS-150................148
MS-150J..............148
MS-1550..............148
MS-1555..............148
MS-1575..............148
MS-1577..............148
MS-175................148
MS-175J..............148
MS-450J..............148
MS-500J..............148
MS-550................148
MS-575................148
MS-950B .............148
MS-950BU...........148
MS-975B .............148
MSB-1540 ...........152
MSG-501.............147
MSI-150...............148
MSI-1525.............148
MSI-200J.............148
MSI-50B ..............148
MSI-550...............148
MSI-950B ............148
MSW-1540 ..........152
NP-1 ....................102
NPR-1..................102
NYD-100................78
NYD-50..................78
OX-100 ..................14
OX-100B................14
OX-400 ..................14
OX-800 ..................14
P208J ....................47
P408S....................47
PCC-1525............151
PCC-300..............151
PCS-100..............151
PCS-1525............151
PCS-1600............151
PCS-300B ...........151
PDB-110..............119
PDB-66................119
PDC-1525B .........152
PDS-1525B .........152
PDT-110 ..............119
PDT-110LC..........119
PE20D...................48
PE22J....................48
PE24J....................48
PH20 .........49,97,103
PH39 .....................49
PH65 ................49,97
PH80 .....................49
PL102....................73
PL102B..................73
PL232B..................73
PL235....................73
PL235B..................73
PLT-1525 .............150
PLW-1525............150
PMB-1525 ...........150
PMC-1525W........150
PMW-100 ............150
PPC-1525............158
PPC-1525UVB ....158
PPC-1538............158
PPC-1538UVB ....158
PPC-1550............158
PPC-1550UVB ....158
PPC-1575............158
PPC-1575UVB ....158
PPC-1600............158
PPR-1550............158
PPR-1575............158
PPR-1600............158
PS-150 ................149
PS-150Z ..............149
PS-150ZJ ............149
PS-1550 ..............149
PS-1575 ..............149
PS-175 ................149
PS-175Z ..............149
PS-175ZJ ............149
PS-225J...............149
PS-250 ................149
PS-275 ................149
PS-50 ..................149
PS-550 ................149
PS-575 ...............149
PS-75 ..................149
PS-750B..............149
PSB-100..............151
PSB-160..............150
PSB-1600............150
PSB-165 .............151
PSB-1650............151
PSG-100..............151
PSG-15................151
PSM-1550 ...........149
PSO-1525............149
PSO-1575............149
PSR-25................151
PSW-100 .............151
PSW-160 .............150
PSW-1600 ...........150
PSW-165 ............151
PSW-1650 ...........151
PSW-200J ...........150
PT2000M...............80
PTM-25................151
PTP-25 ................151
PTP-250J ............151
PWS-1525...........152
RGP-2525 .............89
RGP-2560 .............89
RGP-3825 .............89
RGP-3860 .............89
RGP-50120 ...........89
RGP-5025 .............89
RGP-5060 .............89
RGP-7530 ........82,89
RGP-7560 ........82,89
RK-6 ....................124
RKT-21 ................111
RST-5030 ..............88
RST-5060 ..............88
RST-7530 ..............88
RST-7560 ..............88
RTL-103 ..............136
RTL-107 ..............136
RTL-108 ..............136
RTL-200 ..............136
RTP-3830 ..............89
RTP-5030 ..............89
RTP-7530 ..............89
RTS-100 ................77
RTS-200 ................77
RTS-50B................77
RTX-100 ................77
RTX-200 ................77
RV5 ..................70,71
S-8512..............81,82
SB-205 ................107
SB-207 ................107
SB-209 ................107
SB-210 ................107
SCE-3260............123
SDT-10 ................113
SDT-3 ..................113
SDT-6 ..................113
SE-92 ..................115
SE-98 ..................118
SI-25....................159
SK-632 ................162
SK-832 ................162
SK-832WP...........162
SP3500................102
SP-7 ....................106
SPD-10L..............119
SPD-438..............102
SPD-563..............102
SPD-688..............102
SPD-813..............102
SPK10 .................102
ST40......................73
TK-100...................19
TK-1210.................19
TK-1614.................19
TK-175...................19
TK-1822.................19
TK-32.....................19
TK-40.....................19
TK-500...................19
TM5 .......................86
TRJ-56...................91
TRJ-96...................91
TT-10B.................123
WCM-10 ................93
WRR-100...............91
WRR1002513........91
WRR100259..........91
WRR-300...............91
WSP-100E.............92
WSP-115...............92
WSP-140...............92
WSP-144...............93
WSP144010 ..........94
WSP144050 ..........94
WSP144251 ..........94
WSP144253 ..........94
WSP144254 ..........94
WSP-150...............93
WSP1502517 ........94
PART #PGPART #PGPART #PGPART #PG
2009 / 2010 PRODUCT CATALOG
Catalog # AD-250-09
©2009 Gardner Bender
USA
PO Box 3241
Milwaukee, WI 53201-3241
Customer Service 800.624.4320
Tech Support 414.247.5329
Fax 414.352.2377
CANADA
6615 Ordan Drive, Units 14-15
Mississauga, Ontario
L5T 1X2 Canada
905.564.5749
Fax 905.564.0305
www.gardnerbender.com
Gardner Bender 2009 / 2010 PRODUCT CATALOG 1.800.624.4320

Navigation menu