115784 Catalog
2014-09-27
: Pdf 115784-Catalog 115784-Catalog 005793 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
Altech Corporation 35 Royal Road Flemington, NJ 08822-6000 P 908.806.9400 • F 908.806.9490 www.altechcorp.com Altech Corp.® 348-102013-2M Printed October 2013 Altech Corp. expands its Busbar System and Power Distribution Lines! Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff of engineering, manufacturing and sales personnel to provide the highest quality products with superior service. This is the Altech Commitment! Altech Corp., a leading supplier of busbar systems in the US Market, has expanded its Busbar System Line and added a new Power Distribution System to its broad range of products. Altech has an established line of UL1077/ UL508 Busbars with ratings up to 200A. They are UL recognized and listed for use with most competitor’s supplementary protectors and manual motor controllers. Altech has added a new line of UL489 Busbars to its product range with ratings of up to 115A. They are UL recognized for use with most of Altech’s competitor’s UL489 Miniature Circuit Breakers. Altech’s new Power Distribution System is a new way to simplify existing wiring methods inside a panel. It is modular, highly efficient and cost effective. The Distribution Blocks are already established and the line was expanded for a greater variety. They are rated up to 310A. A new range of Input connector Blocks up to 800A was introduced to complete Altech’s Power Distribution Block line. Quality Commitment Altech’s control components meet diverse national and international standards such as UL, NEC, CSA IEC VDE and more. Altech provides superior customer service and delivery through Total Quality Management and Continuous Process Improvement. Altech is ISO 9001 approved. We perform these services with honesty and integrity and are committed to achieve these goals. 2 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com UL489 Busbars • Overview/ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 • Feeding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 • 1 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 • 2 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 • 3 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 • Power Feed Devices/ Accessories . . . . . . . . . . . . . . . . . . . . . .19 • Configuration and Assembly of UL489 Busbars . . . . . . . . . . . .20 • Busbar Selection Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 APD Power Distribution System • Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 • APD Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 • Fixing and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 • Power Feeding and Connection . . . . . . . . . . . . . . . . . . . . . . . . .25 Power Distribution Blocks/ Splicer Terminal Blocks • 1 Phase Distribution Blocks (80A – 310A) . . . . . . . . . . . . . . .26-28 • 3 Phase Distribution Blocks (115A – 175A) . . . . . . . . . . . . . . . .29 • Splicer Terminal Blocks (175A – 800A) . . . . . . . . . . . . . . . . . . . .30 Miniature Circuit Breaker Short Form . . . . . . . . . . . . . . . . . . . . . .31-32 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL1077 Altech UL508 Altech UL489 UL1077 / UL508 Busbars • Overview/ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 • Feeding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 • 1 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7 • 2 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 • 3 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11 • Power Feed Devices/ Accessories . . . . . . . . . . . . . . . . . . . .12-13 Modular APD System Universal Voltage Power Distribution Systems Altech UL1059 Table of Contents 3 Altech UL1077 Altech UL1077/508 Busbar System UL508 listed E205412 UL1077/508 Listed Busbars The Altech Busbar System is an innovative way to jumper up to 57 poles of Manual Motor Controllers (MMC) and Supplementary Protectors (SP). The advantages of this busbar system are: • • • • 30% Installation time savings Panel space savings Reduced maintenance High electrical ratings Universal UL1077/508 Busbar fits most Supplementary Protectors and Manual Motor Controllers in the market! Altech UL508 UL1077/508 Busbar System 4 Please contact Altech for details and further information. • 1-57 different pin configurations • 1/2 pole spacing (auxiliary switch) available • Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) • UL recognized and listed for Altech’s R-Series, V-EA Series and MA Series of Manual Motor Controllers and Supplementary Protectors • UL recognized and listed for use with most popular UL1077 supplementary protectors and UL508 Manual Motor Controllers in the market. • Customers can cut the Busbar without losing the UL approval • Line/Load reversible Technical Specifications Material of Busbar Material of Insulation (Housing) Electrical Ratings Short Circuit Withstand Rating Applying Standards Busbars UL1077/ 508 Copper Polyamid 18mm2: 80A/480VAC 25mm2: 100A/480VAC 10kA UL508, VDE0660 Part 100 and 502, VDE 0606, VDE 0659 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL1077/508 Busbar System Altech UL1077 Power Feed Methods 80A/100A per phase 1) Start/ End Feed Method 1 2 3 (P50UT) P50UT* / P50UB* With the P50UT Power Feed Lug or the P50UB Modular Direct Power Feed as a Start/End Feeding Device a maximum input current of 80A/100A per Phase can be achieved. 80A with 18mm² Busbar and 100A with 25mm² Busbar. 80A/100A 80A/100A 80A/100A 1 2 3 80A/100A per phase 80A/100A 80A/100A 80A/100A (P50UB) 115A per phase 1 2) Center/ Middle Feed Method 3 35A/15A 35A/15A 35A/15A 35A/15A 35A/15A 80A/100A 80A/100A 80A/100A 35A/15A 80A/100A 80A/100A 80A/100A 1 2 3 115A per phase P95UB* 80/100A 80/100A 80/100A (P50UB) 80/100A 80/100A 80/100A With the P95UB Power Feed Block as a Center/Middle Feeding Device a maximum input current of 160A/200A per Phase can be achieved (160A with 18mm² Busbar and 200A with 25mm² Busbar). Note: The Power Feed Block can only be used with a standard spacing 3 Phase UL1077/508 Busbar. (P95UB) 1 2 3 Altech UL508 (P50UT) P50UT* / P50UB* With the P50UT Power Feed Lug or the P50UB Modular Direct Power Feed as a Center/Middle Feeding Device a maximum input current of 115A per Phase can be achieved. (18mm²: 80A + 35A; 25mm²: 100A + 15A) 2 160A/200A per phase * For complete specifications and description of Feeding Devices see page 12-13. Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 5 1 PHASE BUSBAR - standard spacing 18mm2 for 80A Altech UL508 UL508 listed E205412 15 mm (0.59 in.) 1007 mm (39.65 in.) Type/ Cat. No. 1P18U1/2 1P18U1/3 1P18U1/4 1P18U1/5 1P18U1/6 1P18U1/7 1P18U1/8 1P18U1/9 1P18U1/10 1P18U1/11 1P18U1/12 1P18U1/13 1P18U1/14 1P18U1/15 1P18U1/16 1P18U1/17 1P18U1/18 1P18U1/19 1P18U1/20 1P18U1/21 1P18U1/22 1P18U1/23 1P18U1/24 1P18U1/25 1P18U1/26 1P18U1/27 1P18U1/28 1P18U1/29 ACCESSoRIES Type/Cat. No: Description: 6 2 mm (0.79 in.) 15 mm (0.59 in.) Altech UL1077 3.5 mm (0.14 in.) 56 x 17.8 = 996.8 mm (39.24 in.) 17.8 mm (0.70 in.) 18mm2 for 80A No. of Pins No. of MMC to Jumper Length [mm] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 2x1 pole 3x1 pole 4x1 pole 5x1 pole 6x1 pole 7x1 pole 8x1 pole 9x1 pole 10x1 pole 11x1 pole 12x1 pole 13x1 pole 14x1 pole 15x1 pole 16x1 pole 17x1 pole 18x1 pole 19x1 pole 20x1 pole 21x1 pole 22x1 pole 23x1 pole 24x1 pole 25x1 pole 26x1 pole 27x1 pole 28x1 pole 29x1 pole 32.5 50.3 68.0 85.8 103.5 121.3 139.0 156.8 174.5 192.3 210.0 227.8 245.5 263.3 281.0 298.8 316.5 334.3 352.0 369.8 387.5 405.3 423.0 440.8 458.5 476.3 494.0 511.8 P50UT Power Feed Lug Type/ Cat. No. 1P18U1/30 1P18U1/31 1P18U1/32 1P18U1/33 1P18U1/34 1P18U1/35 1P18U1/36 1P18U1/37 1P18U1/38 1P18U1/39 1P18U1/40 1P18U1/41 1P18U1/42 1P18U1/43 1P18U1/44 1P18U1/45 1P18U1/46 1P18U1/47 1P18U1/48 1P18U1/49 1P18U1/50 1P18U1/51 1P18U1/52 1P18U1/53 1P18U1/54 1P18U1/55 1P18U1/56 1P18U1/57 18mm2 for 80A No. of Pins 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 P50UB Modular Direct Power Feed Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com No. of MMC to Jumper 30x1 31x1 32x1 33x1 34x1 35x1 36x1 37x1 38x1 39x1 40x1 41x1 42x1 43x1 44x1 45x1 46x1 47x1 48x1 49x1 50x1 51x1 52x1 53x1 54x1 55x1 56x1 57x1 pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole BRS5 Insulation Cap Length [mm] 529.5 547.3 565.0 582.8 600.5 618.3 636.0 653.8 671.5 689.3 707.0 724.8 742.5 760.3 778.0 795.8 813.5 831.3 849.0 866.8 884.5 902.3 920.0 937.8 955.5 973.3 991.0 1008.8 1 PHASE BUSBAR - 1/2 pole spacing 18mm2 for 80A 36 x 27 = 972 mm (38.27 in.) 27 mm (1.06 in.) 15 mm (0.59 in.) 15 mm (0.59 in.) UL508 listed E205412 982 mm (38.66 in.) 1P18U1H/2 1P18U1H/3 1P18U1H/4 1P18U1H/5 1P18U1H/6 1P18U1H/7 1P18U1H/8 1P18U1H/9 1P18U1H/10 1P18U1H/11 1P18U1H/12 1P18U1H/13 1P18U1H/14 1P18U1H/15 1P18U1H/16 1P18U1H/17 1P18U1H/18 1P18U1H/19 No. of Pins No. of MMC to Jumper Length [mm] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2x1 pole 3x1 pole 4x1 pole 5x1 pole 6x1 pole 7x1 pole 8x1 pole 9x1 pole 10x1 pole 11x1 pole 12x1 pole 13x1 pole 14x1 pole 15x1 pole 16x1 pole 17x1 pole 18x1 pole 19x1 pole 39.0 66.0 93.0 120.0 147.0 174.0 201.0 228.0 255.0 282.0 309.0 336.0 363.0 390.0 417.0 444.0 471.0 498.0 Type/ Cat. No. 1P18U1H/20 1P18U1H/21 1P18U1H/22 1P18U1H/23 1P18U1H/24 1P18U1H/25 1P18U1H/26 1P18U1H/27 1P18U1H/28 1P18U1H/29 1P18U1H/30 1P18U1H/31 1P18U1H/32 1P18U1H/33 1P18U1H/34 1P18U1H/35 1P18U1H/36 18mm2 for 80A No. of Pins No. of MMC to Jumper 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 20x1 21x1 22x1 23x1 24x1 25x1 26x1 27x1 28x1 29x1 30x1 31x1 32x1 33x1 34x1 35x1 36x1 pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole ACCESSoRIES Type/Cat. No: Description: Length [mm] 525.0 552.0 579.0 606.0 633.0 660.0 687.0 714.0 741.0 768.0 795.0 822.0 849.0 876.0 903.0 930.0 957.0 Altech UL508 Type/ Cat. No. 18mm2 for 80A Altech UL1077 2 mm (0.79 in.) 4mm (0.16 in.) P50UT Power Feed Lug P50UB Modular Direct Power Feed Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com BRS5 Insulation Cap 7 2 PHASE BUSBAR - standard spacing Altech UL508 37 mm (1.46 in.) 2 mm (.079 in.) L2 L1 Copper strips Insulation Track End Cap End Cap 21 mm (0.83 in.) L2 L1 Type/ Cat. No. 2P18U3/4 2P18U3/6 2P18U3/8 2P18U3/10 2P18U3/12 2P18U3/14 2P18U3/16 2P18U3/18 2P18U3/20 2P18U3/22 2P18U3/24 2P18U3/26 2P18U3/28 2P18U3/30 2P18U3/32 2P18U3/34 2P18U3/36 2P18U3/38 2P18U3/40 2P18U3/42 2P18U3/44 2P18U3/46 2P18U3/48 2P18U3/50 2P18U3/52 2P18U3/54 2P18U3/56 ACCESSoRIES Type/Cat. No: Description: 8 55 x 17.75 = 976 mm (38.43 in.) 17.75 mm (0.70 in.) 7 mm (0.28 in.) UL508 listed E205412 13 mm (.51 in.) Altech UL1077 18mm2 for 80A / 25mm2 for 100A 18mm2 for 80A 991 mm (39.02 in.) No. of Pins No. of MMC to Jumper Length [mm] 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 pole 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x2 pole 66.3 101.8 137.3 172.8 208.3 243.8 279.3 314.8 350.3 385.8 421.3 456.8 492.3 527.8 563.3 598.8 634.3 669.8 705.3 740.8 776.3 811.8 847.3 882.8 918.3 953.8 989.3 P50UT Power Feed Lug Type/ Cat. No. 2P25U3/4 2P25U3/6 2P25U3/8 2P25U3/10 2P25U3/12 2P25U3/14 2P25U3/16 2P25U3/18 2P25U3/20 2P25U3/22 2P25U3/24 2P25U3/26 2P25U3/28 2P25U3/30 2P25U3/32 2P25U3/34 2P25U3/36 2P25U3/38 2P25U3/40 2P25U3/42 2P25U3/44 2P25U3/46 2P25U3/48 2P25U3/50 2P25U3/52 2P25U3/54 2P25U3/56 P50UB Modular Direct Power Feed 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 pole 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x2 pole 66.3 101.8 137.3 172.8 208.3 243.8 279.3 314.8 350.3 385.8 421.3 456.8 492.3 527.8 563.3 598.8 634.3 669.8 705.3 740.8 776.3 811.8 847.3 882.8 918.3 953.8 989.3 BRS5 Insulation Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 18/25CAP3P End Cap 2 PHASE BUSBAR - 1/2 pole spacing 37 mm (1.46 in.) 2 mm (.079 in.) 21 mm (0.83 in.) 1009 mm (39.72 in.) No. of Pins No. of MMC to Jumper 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 poles 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x1 pole 2P18U3H/4 2P18U3H/6 2P18U3H/8 2P18U3H/10 2P18U3H/12 2P18U3H/14 2P18U3H/16 2P18U3H/18 2P18U3H/20 2P18U3H/22 2P18U3H/24 2P18U3H/26 2P18U3H/28 2P18U3H/30 2P18U3H/32 2P18U3H/34 2P18U3H/36 2P18U3H/38 2P18U3H/40 2P18U3H/42 2P18U3H/44 2P18U3H/46 2P18U3H/48 2P18U3H/50 2P18U3H/52 2P18U3H/54 2P18U3H/56 ACCESSoRIES Type/Cat. No: Description: P50UT Power Feed Lug Length [mm] 75.3 119.8 164.3 208.8 253.3 297.8 342.3 386.8 431.3 475.8 520.3 564.8 609.3 653.8 698.3 742.8 787.3 831.8 876.3 920.8 965.3 1009.8 1054.3 1098.8 1143.3 1187.8 1232.3 Type/ Cat. No. 2P25U3H/4 2P25U3H/6 2P25U3H/8 2P25U3H/10 2P25U3H/12 2P25U3H/14 2P25U3H/16 2P25U3H/18 2P25U3H/20 2P25U3H/22 2P25U3H/24 2P25U3H/26 2P25U3H/28 2P25U3H/30 2P25U3H/32 2P25U3H/34 2P25U3H/36 2P25U3H/38 2P25U3H/40 2P25U3H/42 2P25U3H/44 2P25U3H/46 2P25U3H/48 2P25U3H/50 2P25U3H/52 2P25U3H/54 2P25U3H/56 P50UB Modular Direct Power Feed 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 pole 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x2 pole 75.3 119.8 164.3 208.8 253.3 297.8 342.3 386.8 431.3 475.8 520.3 564.8 609.3 653.8 698.3 742.8 787.3 831.8 876.3 920.8 965.3 1009.8 1054.3 1098.8 1143.3 1187.8 1232.3 BRS5 Insulation Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL508 Type/ Cat. No. 18mm2 for 80A Altech UL1077 22 x 44.5 = 979 mm (38.54 in.) 44.5 mm (1.75 in.) 17.8 mm (0.70 in.) 7 mm (0.28 in.) UL508 listed E205412 13 mm (.51 in.) 18mm2 for 80A / 25mm2 for 100A 18/25CAP3P End Cap 9 3 PHASE BUSBAR - standard spacing Altech UL508 2 mm (.079 in.) L3 L2 L1 Copper strips Insulation Track End Cap 21 mm End Cap (0.83 in.) L3 L2 L1 1009 mm (39.72 in.) Type/ Cat. No. 3P18U3/6 3P18U3/9 3P18U3/12 3P18U3/15 3P18U3/18 3P18U3/21 3P18U3/24 3P18U3/27 3P18U3/30 3P18U3/33 3P18U3/36 3P18U3/39 3P18U3/42 3P18U3/45 3P18U3/48 3P18U3/51 3P18U3/54 3P18U3/57 18mm2 for 80A No. of Pins No. of MMC to Jumper Length [mm] Type/ Cat. No. 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 101.8 155.0 208.3 261.5 314.8 368.0 421.3 474.5 527.8 581.0 634.3 687.5 740.8 794.0 847.3 900.5 953.8 1007.0 3P25U3/6 3P25U3/9 3P25U3/12 3P25U3/15 3P25U3/18 3P25U3/21 3P25U3/24 3P25U3/27 3P25U3/30 3P25U3/33 3P25U3/36 3P25U3/39 3P25U3/42 3P25U3/45 3P25U3/48 3P25U3/51 3P25U3/54 3P25U3/57 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 101.8 155.0 208.3 261.5 314.8 368.0 421.3 474.5 527.8 581.0 634.3 687.5 740.8 794.0 847.3 900.5 953.8 1007.0 ACCESSoRIES Type/Cat. No: Description: Type/Cat. No: Description: 10 7 mm (0.28 in.) 56 x 17.75 = 994 mm (39.13 in.) 17.75 mm (0.70 in.) 37 mm (1.46 in.) UL508 listed E205412 13 mm (.51 in.) Altech UL1077 18mm2 for 80A / 25mm2 for 100A P50UT Power Feed Lug P50UB Modular Direct Power Feed BRS5 Insulation Cap 18/25CAP3P End Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com P95UB Power Feed Block 3 PHASE BUSBAR - 1/2 pole spacing 15 x 62.3 = 934.5 mm 62.3 mm (2.45 in.) 2 mm (.079 in.) 21 mm (0.83 in.) 982 mm (38.66 in.) Type/ Cat. No. 18mm2 for 80A No. of Pins No. of MMC to Jumper Length [mm] Type/ Cat. No. 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 110.8 173.1 235.4 297.7 360.0 422.3 484.6 546.9 609.2 671.5 733.8 796.1 858.4 920.7 983.0 1045.3 1107.6 1169.9 3P25U3H/6 3P25U3H/9 3P25U3H/12 3P25U3H/15 3P25U3H/18 3P25U3H/21 3P25U3H/24 3P25U3H/27 3P25U3H/30 3P25U3H/33 3P25U3H/36 3P25U3H/39 3P25U3H/42 3P25U3H/45 3P25U3H/48 3P25U3H/51 3P25U3H/54 3P25U3H/57 3P18U3H/6 3P18U3H/9 3P18U3H/12 3P18U3H/15 3P18U3H/18 3P18U3H/21 3P18U3H/24 3P18U3H/27 3P18U3H/30 3P18U3H/33 3P18U3H/36 3P18U3H/39 3P18U3H/42 3P18U3H/45 3P18U3H/48 3P18U3H/51 3P18U3H/54 3P18U3H/57 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 110.8 173.1 235.4 297.7 360.0 422.3 484.6 546.9 609.2 671.5 733.8 796.1 858.4 920.7 983.0 1045.3 1107.6 1169.9 ACCESSoRIES Type/Cat. No: Description: P50UT Power Feed Lug P50UB Modular Direct Power Feed Type/Cat. No: Description: BRS5 Insulation Cap 18/25CAP3P End Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL508 7 mm (0.28) 17.8 mm (0.70 in.) 37 mm (1.46 in.) UL508 listed E205412 Altech UL1077 13 mm (.51 in.) 18mm2 for 80A / 25mm2 for 100A 11 Power Feed Devices Altech UL1077 Easy connection of power supply wires to the busbar/MCB. Power Feed Devices ensure permanent connection. Type/Cat. No. Electrical Ratings Terminal Site Acceptability Recommended/ Required Torque Material of Lug/ Terminal Insulation Material For use with Power Feed Lug Modular Direct Power Feed UL508 listed E205412 UL508 listed E205412 P50UT 115A/480VAC 10-1/0 AWG (1.5-50mm2) P50UB 115A/480VAC 14-1 AWG (1.5-50mm2) 5.6Nm (50lb. in.) Brass Polyamid UL1077/508 18 and 25mm2 1-3 phase busbars 4Nm (35.4 lb. in.) Brass Polyamid UL1077/508 18 and 25mm2 1-3 phase busbars Dimensions 11 mm (0.43 in.) 59 mm (2.32 in.) 28.5 mm (1.12 in.) 21 mm (0.83 in.) 16 mm (0.63 in.) 3 mm (0.12 in.) Altech UL508 6.8 mm (0.27 in.) Assembly Instructions The power feed lugs (Cat. # P50UT) fit together with the lugs of the busbar in the terminals of the MCB/MA. 12 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Power Feed Block End Caps UL508 listed E205412 Type/Cat. No. Electrical Ratings Terminal Site Acceptability Recommended/ Required Torque Material of Lug/ Terminal Insulation Material For use with P95UB 200A/ 480VAC 1-4/0 AWG (50-120mm2) 19.5Nm (175lb. in.) Brass Polyamid UL1077/508 18 and 25mm2 3 phase busbars (standard spacing only) Type/Cat. No: For use with: 18/25CAP3P 18/25mm2 2&3 phase Busbar Insulation Caps Dimensions Altech UL1077 Miscellaneous Accessories 43.5 mm (1.71 in.) DIN Rail Clip 31.6 mm (1.24 in.) 35.6 mm B (1.40 in.) A BRS5 (5 per strip) 18/25mm2 1-3 phase Busbar 63 mm (2.48 in.) 63 mm (2.48 in.) 35.6 mm (1.40 in.) Type/Cat. No: For use with: 31.6 mm (1.24 in.) B Assembly Instructions NOTE: The Power Feed Block uses the space of 5 Pins of the standard spacing Busbar (see drawing below). Phase 1 connects to Pin 1, Phase 2 to Pin 3 and Phase 3 to Pin 5. Pin 2 and 4 are not in use. Pin 6 should be covered with an insulation cap if phase sequence stays the same. Therefore, the Power Feed Block covers 6 pins to connect to the three phases. 1 1 2 2 3 3 1 4 Phase 1 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 2 5 3 6 Phase Pin Phase 2 Phase 3 Altech UL508 88.5 mm (3.48 in.) A 13 Altech UL489 Busbar System UL489 recognized E305318 UL489 Listed Busbars The Altech Busbar System is an innovative way to jumper power to Miniature Molded Circuit Breakers. Altech UL489 The advantages of this busbar system are: • • • • 30% Installation time savings Panel space savings Reduced maintenance High electrical ratings Universal UL489 Busbar fits most UL489 Miniature Circuit Breakers in the market! UL489 Busbar System Please contact Altech for details and further information. • Every pin configuration is possible by combination of existing 6, 12 and 18 pin busbars. • Power Feeding: Power Feed Lug (115A), Direct Power Feed (115A) • UL listed for Altech’s L-Series of Miniature Circuit Breakers • UL listed for use with most popular UL489 Miniature Molded Circuit Breakers in the market. Technical Specifications Material of Busbar Material of Insulation (Housing) Electrical Ratings Short Circuit Withstand Rating Applying Standards 14 Busbars UL489 Copper Polyamid 115A/480VAC 10kA UL489, VDE0660 Part 100, IEC60749, DIN EN60947-1 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL489 Busbar System Power Feed Methods End Feed Method P35ULT* With the P35ULT Power Feed Lug as a Start/End Feeding Device a maximum input current of 115A per Phase can be achieved. 115A per phase 1 2 3 115A 115A 115A P50ULB* With the P50ULB Modular Direct Power Feed as a Start/End Feeding Device a maximum input current of 115A per Phase can be achieved. 115A 115A 1 2 3 115A per phase Altech UL489 (P35ULT) 115A (P50ULB) * For complete specifications and description of Feeding Devices see page 19. Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 15 1 PHASE BUSBAR 6 99 6 x 17.6 = 88 mm (3.46 in.) 15.5 mm (0.61 in.) 204.6 mm (8.06 in.) Altech UL489 UL489 recognized E305318 Type/ Cat. No. No. of Pins Length [mm] 1P16UL3/12 12 204.6 5 mm (0.20 in.) 17.6 mm (0.69 in.) 12 x 17.6 = 193.6 mm (7.62 in.) 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 15.5 mm (0.61 in.) 310.2 (12.21 in.) UL489 recognized E305318 Type/ Cat. No. No. of Pins Length [mm] 1P16UL3/18 18 310.2 5 mm (0.20 in.) 17.6 mm (0.69 in.) 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 18 x 17.6 = 299.2 (11.78 in.) Example for different No. of Pins eg. 44 pins use 1x 1P16UL3/12 + 2x 1P16UL3/18 Busbars backwards to one another /12 1P16UL3 /18 1P16UL3 /18 1P16UL3 ACCESSoRIES Type/Cat. No: Description: 16 overlapping • No. of overlapping pins of 2 busbars must be a multiplier of the No. of phases • Overlapping busbars are backwards to each other P35ULT Power Feed Lug P50ULB Modular Direct Power Feed Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com BRUL (3 per strip) Insulation Cap 35 mm (1.38 in.) 1P16UL3/6 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 5 mm (0.20 in.) 17.6 mm (0.69 in.) 13.5mm (0.53 in.) Length [mm] 35 mm (1.38 in.) No. of Pins 13.5mm (0.53 in.) Type/ Cat. No. 15.5 mm (0.61 in.) 13.5mm (0.53 in.) 99 mm (3.90 in.) UL489 recognized E305318 35 mm (1.38 in.) 16mm2 for 115A 2 PHASE BUSBAR 99 15.5 mm (0.61 in.) 204.6 mm (8.06 in.) UL489 recognized E305318 Type/ Cat. No. No. of Pins Length [mm] 2P16UL3/12 12 204.6 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 5 mm (0.20 in.) 17.6 mm (0.69 in.) 12 x 17.6 = 193.6 mm (7.62 in.) 15.5 mm (0.61 in.) 310.2 (12.21 in.) UL489 recognized E305318 Type/ Cat. No. No. of Pins Length [mm] 2P16UL3/18 18 310.2 5 mm (0.20 in.) 17.6 mm (0.69 in.) 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 18 x 17.6 = 299.2 (11.78 in.) Altech UL489 6 6 x 17.6 = 88 mm (3.46 in.) 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 35 mm (1.38 in.) 2P16UL3/6 5 mm (0.20 in.) 17.6 mm (0.69 in.) 13.5mm (0.53 in.) Length [mm] 35 mm (1.38 in.) No. of Pins 13.5mm (0.53 in.) Type/ Cat. No. 15.5 mm (0.61 in.) 13.5mm (0.53 in.) 99 mm (3.90 in.) UL489 recognized E305318 35 mm (1.38 in.) 16mm2 for 115A Example for different No. of Pins eg. 30 pins use 3x 2P16UL3/12 Busbars backwards to one another /12 /12 2P16UL3 2P16UL3 /12 2P16UL3 ACCESSoRIES Type/Cat. No: Description: overlapping • No. of overlapping pins of 2 busbars must be multiplier of the No. of phases • Overlapping busbars are backwards to each other P35ULT Power Feed Lug P50ULB Modular Direct Power Feed BRUL (3 per strip) Insulation Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 17 3 PHASE BUSBAR 3P16UL3/6 6 99 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 5 mm (0.20 in.) 17.6 mm (0.69 in.) 6 x 17.6 = 88 mm (3.46 in.) 15.5 mm (0.61 in.) 204.6 mm (8.06 in.) Altech UL489 UL489 listed E305318 Type/ Cat. No. No. of Pins Length [mm] 3P16UL3/12 12 204.6 5 mm (0.20 in.) 17.6 mm (0.69 in.) 12 x 17.6 = 193.6 mm (7.62 in.) 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 15.5 mm (0.61 in.) 310.2 (12.21 in.) UL489 listed E305318 Type/ Cat. No. No. of Pins Length [mm] 3P16UL3/18 18 310.2 5 mm (0.20 in.) 17.6 mm (0.69 in.) 1.5 mm (0.06 in.) max. 1.5 mm (0.06 in.) 18 x 17.6 = 299.2 (11.78 in.) Example for different No. of Pins eg. 39 pins use 1x 3P16UL3/12 + 2x 3P16UL3/18 Busbars backwards to one another /12 3P16UL3 /18 3P16UL3 /18 3 16UL3 3P overlapping ACCESSoRIES Type/Cat. No: Description: 18 • No. of overlapping pins of 2 busbars must be multiplier of the No. of phases • Overlapping busbars are backwards to each other P35ULT Power Feed Lug P50ULB Modular Direct Power Feed Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com BRUL (3 per strip) Insulation Cap 35 mm (1.38 in.) Length [mm] 13.5mm (0.53 in.) No. of Pins 35 mm (1.38 in.) Type/ Cat. No. 13.5mm (0.53 in.) 15.5 mm (0.61 in.) 13.5mm (0.53 in.) 99 mm (3.90 in.) UL489 listed E305318 35 mm (1.38 in.) 16mm2 for 115A UL489 listed E305318 P35ULT P50ULB 115A/480V AC 75 C° 14-1AWG(1.5-50mm2) 3.5Nm/31 lb. in. (14-6AWG) 4Nm/35.4 lb. in. (4-1AWG) Brass Polyamid UL489 1-3 phase Busbar Brass Polyamid UL489 1-3 phase Busbar 31.3 mm (1.23 in.) 31.2 mm (0.00 in.) 16.2 mm (0.64 in.) Ø13.5 mm (0.53 in.) 16.1 mm (0.63 in.) 74.2 mm (2.92 in.) UL489 listed E305318 115A/480V AC 75 C° 14-2AWG(1.53mm2) 4Nm (35.4 lb. in.) Material of Lug Insulation Material For use with 48.5 mm (1.91 in.) Modular Direct Power Feed 12.4 mm (0.49 in.) 6 mm (0.24 in.) 17.75 mm (0.70 in.) 51.36 mm (20.22 in.) 3 mm (0.12 in.) Assembly Instructions Miscellaneous Accessories Type/Cat. No: Description: Altech UL489 Type/Cat. No. Electrical Ratings Conductors Terminal Site Acceptability Required Torque Power Feed Lug 17.6 mm (0.69 in.) Easy connection of power supply wires to the busbar/MCB. Power Feed Devices ensure permanent connection. 4 mm (0.16 in.) Power Feed Devices 6 mm (0.24 in.) 12.6 mm (0.50 in.) Insulation Caps BRUL (3 per strip) Insulation Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 19 Altech Busbar Systems Configuration and Assembly of UL489 Busbars UL489 Busbars are available in 3 different Pin Configurations per Phase, (6, 12 and 18 Pins). The UL489 busbar cannot be cut, since the creepage and clearance distance requirements from UL are too stringent. Therefore, to obtain the desired No. of Pins, Busbar-Pins can be overlapped as explained below: 1) Busbars are overlapped backwards to each other. Both Pins of each Busbar fit together in the terminals of the Minature Circuit Breaker. 2 The Number of overlapping Pins of 2 Busbar must be a multiplier of the Number of Phases to keep existing Phase sequence. (Can be overlapped by more than the number of phases). 3) Any available combination of the 3 different Pin configurations is possible. 4) In most cases there is more than 1 combination possible. 5) For more possible configurations see Busbar Selection Table on page 21. Configuration Examples* 16 Pins: 3 x 1P16UL3/6 1P16UL 3/6 Altech UL489 1P16UL 3/6 3/6 1P16UL 1 Phase 29 Pins: 1 x 1P16UL3/12 + 1 x 1P16UL3/18 3/12 1P16UL 1P16UL 3/18 22 Pins: 2 x 2P16UL3/12 3/12 2P16UL 2P16UL 3/12 2 Phase 36 Pins: 2 x 2P16UL3/12 + 1 x 2P16UL3/18 3/12 2P16UL 3/12 2P16UL 3/18 2P16UL 27 Pins: 1 x 3P16UL3/12 + 1 x 3P16UL3/18 3/12 3P16UL 3P16UL 3/18 3 Phase 39 Pins: 1 x 3P16UL3/12 + 2 x 3P16UL3/18 3/12 3P16UL 3P16UL 3/18 3P16UL 3/18 *For Questions, other configurations and detailed information please contact Altech Corp. 20 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Busbar Selection Table Necessary Busbars 1 Phase System 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1x 1P16UL3/6 2x 1P16UL3/6 2x 1P16UL3/6 2x 1P16UL3/6 2x 1P16UL3/6 2x 1P16UL3/6 1x 1P16UL3/12 3x 1P16UL3/6 2x 1P16UL3/12 3x 1P16UL3/6 1x 1P16UL3/6 + 1x 1P16UL3/12 2x 1P16UL3/12 3x 1P16UL3/6 1x 1P16UL3/6 + 1x 1P16UL3/12 2x 1P16UL3/12 3x 1P16UL3/6 1x 1P16UL3/6 + 1x 1P16UL3/12 2x 1P16UL3/12 3x 1P16UL3/6 1x 1P16UL3/6 + 1x 1P16UL3/12 2x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/18 2x 1P16UL3/12 2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/6 + 2x 1P16UL3/12 2x 1P16UL3/12 2x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/6 + 2x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/6 + 2x 1P16UL3/12 2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 2x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/6 + 2x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 2x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/6 + 2x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/18 3x 1P16UL3/12 2x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/18 3x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/18 3x 1P16UL3/12 No. of Pins 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Necessary Busbars 2x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/18 3x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/6 + 1x 1P16UL3/18 3x 1P16UL3/12 2x 1P16UL3/18 1x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/12 2x 1P16UL3/18 3x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 1P16UL3/18 3x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 1P16UL3/18 3x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 1P16UL3/18 3x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 1P16UL3/18 3x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 1P16UL3/6 + 2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 1P16UL3/6 + 2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 1P16UL3/6 + 2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 1P16UL3/6 + 2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 1P16UL3/6 + 2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 No. of Pins 43 44 45 46 47 48 49 50 51 52 Necessary Busbars 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 3x 1P16UL3/18 3x 1P16UL3/18 3x 1P16UL3/18 3x 1P16UL3/18 3x 1P16UL3/18 3x 1P16UL3/18 3x 1P16UL3/18 No. of Pins 38 40 42 44 46 48 50 Necessary Busbars 1x 2P16UL3/6 + 2x 2P16UL3/18 3x 2P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18 3x 2P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18 3x 2P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18 3x 2P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18 3x 2P16UL3/18 3x 2P16UL3/18 3x 2P16UL3/18 3 Phase System 2 Phase System 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 1x 2P16UL3/6 2x 2P16UL3/6 2x 2P16UL3/6 3x 2P16UL3/6 1x 2P16UL3/12 3x 2P16UL3/6 2x 2P16UL3/12 1x 2P16UL3/6 + 1x 2P16UL3/12 2x 2P16UL3/12 1x 2P16UL3/6 + 1x 2P16UL3/12 1x 2P16UL3/18 2x 2P16UL3/12 2x 2P16UL3/6 + 1x 2P16UL3/12 2x 2P16UL3/6 + 1x 2P16UL3/12 1x 2P16UL3/6 + 1x 2P16UL3/18 2x 2P16UL3/12 2x 2P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/12 2x 2P16UL3/18 1x 2P16UL3/6 + 1x 2P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/6 + 1x 2P16UL3/18 1x 2P16UL3/6 + 2x 2P16UL3/12 3x 2P16UL3/12 2x 2P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/6 + 1x 2P16UL3/18 1x 2P16UL3/6 + 2x 2P16UL3/12 3x 2P16UL3/12 2x 2P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 3x 2P16UL3/12 2x 2P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 1x 2P16UL3/6 + 1x 2P16UL3/12 + 1x 2P16UL3/18 3x 2P16UL3/12 2x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/18 1x 2P16UL3/6 + 1x 2P16UL3/12 + 1x 2P16UL3/18 3x 2P16UL3/12 2x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/18 1x 2P16UL3/6 + 1x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18 2x 2P16UL3/18 1x 2P16UL3/6 + 2x 2P16UL3/18 3x 2P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18 9 12 15 18 21 24 27 30 33 36 39 42 45 48 2x 3P16UL3/6 1x 3P16UL3/12 3x 3P16UL3/6 1x 3P16UL3/6 + 1x 3P16UL3/12 2x 3P16UL3/12 1x 3P16UL3/18 1x 3P16UL3/12 + 2x 3P16UL3/6 2x 3P16UL3/12 2x 3P16UL3/12 1x 3P16UL3/6 + 1x 3P16UL3/18 1x 3P16UL3/12 + 1x 3P16UL3/18 2x 3P16UL3/18 1x 3P16UL3/12 + 1x 3P16UL3/18 2x 3P16UL3/6 + 1x 3P16UL3/18 1x 3P16UL3/6 + 2x 3P16UL3/12 3x 3P16UL3/12 2x 3P16UL3/18 1x 3P16UL3/12 + 1x 3P16UL3/18 2x 3P16UL3/18 3x 3P16UL3/12 2x 3P16UL3/18 2x 3P16UL3/12 + 1x 3P16UL3/18 3x 3P16UL3/12 1x 3P16UL3/6 + 1x 3P16UL3/12 + 1x 3P16UL3/18 2x 3P16UL3/18 2x 3P16UL3/12 + 1x 3P16UL3/18 1x 3P16UL3/6 + 2x 3P16UL3/18 2x 3P16UL3/12 + 1x 3P16UL3/18 1x 3P16UL3/12 + 2x 3P16UL3/18 3x 3P16UL3/18 1x 3P16UL3/12 + 2x 3P16UL3/18 3x 3P16UL3/18 1x 3P16UL3/12 + 2x 3P16UL3/18 3x 3P16UL3/18 3x 3P16UL3/18 3x 3P16UL3/18 Altech UL489 No. of Pins Note: For detailed information and examples see page 20. Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 21 Modular APD System Altech’s modular Power Distribution (APD) System is a new way to simplify existing wiring methods! The modular APD system provides flexible solutions for busing common power to many different electrical components. Components can be easily added or removed using quick disconnects saving valuable time and cost during installation and maintenance. The APD system also provides an organized method of wiring, that would simplify the wiring schematics for troubleshooting, while reducing the use of excessive wires and cables. Modular APD System The APD system allows multiple connections per phase for many applications, such as: 22 • Supplying separate voltages to auxiliary circuits and control circuits for relays, contactors, timers, etc. • Supplying power to circuit breakers, motor starters, switches, contactors, etc. Two conductors are housed within a rigid plastic insulation housing suitable for voltages up to 600VAC. The conductors have current ratings of 25A, 63A or 80A. The entire system is touch proof (IP20). UL1059 listed E98082 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com APD BUSBARS End Support (17BS) Specifications: APD Busbars are available with 1 or 2 phases, Max. Temperature 158°F (70°C) Material Insulation: PVC Length: 1.9m (6.23 ft.)/ 1.0m (3.281 ft.) APD Busbar Power Input Connector (40017) 83 Connections per Meter per Phase Part No. 1LB158-25A 2LB158-25A 1LB83-25A 2LB83-25A 1TC158-63A 2TC158-63A 1TC83-63A 2TC83-63A 1TC158-80A 2TC158-80A 1TC83-80A 2TC83-80A Possible Connections / Phase 158 158 83 83 158 158 83 83 158 158 83 83 No. of Phases 1 2 1 2 1 2 1 2 1 2 1 2 Material Length Brass Brass Brass Brass Tinned Copper Tinned Copper Tinned Copper Tinned Copper Tinned Copper Tinned Copper Tinned Copper Tinned Copper 1.9m (6.23 ft.) 1.9m (6.23 ft.) 1.0m (3.281 ft.) 1.0m (3.281 ft.) 1.9m (6.23 ft.) 1.9m (6.23 ft.) 1.0m (3.281 ft.) 1.0m (3.281 ft.) 1.9m (6.23 ft.) 1.9m (6.23 ft.) 1.0m (3.281 ft.) 1.0m (3.281 ft.) 13 mm 4.6 mm 4.6 mm 30 mm Modular APD System Electrical Rating (600VAC) 25A 25A 25A 25A 63A 63A 63A 63A 80A 80A 80A 80A Bar Holder (19FT3V) Technical Note: The standard busbar lengths can be cut to any desirable length. When cutting the busbars remember to cut the conductor 62mm shorter than the insulation to ensure space for the insulation cap (Part No. 17BI0) at each end. This guarantees adequate and required creepage distance (see picture below). If an end support (Part No. 17BS) is used then no insulation cap is needed. 31 mm 31 mm insulation cap insulation cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 23 FIxINg AND MoUNTINg Bar-Holder The holder can accommodate up to 3 Busbars (6 conductor circuits) Holders should be set approx. every 500mm (19.69 in.). For each Busbar to be fixed cut 2 braces out of the holder, keep the others to assure stability PVC 30 mm Slide in insulation cap from the side into insulation. Material including 17EET cover -PVC label - Paper 14.5 60 Noryl Screw M4x25 insulation cap Part No. Material 1.5 17BS If an end support is used, no insulation cap (Part No. 17BIO) is necessary Busbar Holder Marking Set 14.5 24 Material Length Part No. The bar-holder has engraved numerical identification from 1-12. The bar-holder can also accomodate 42x25 mm (1.65 x 0.98 in.) labels and a transparent protection cover. This marking-set is available as part no. 17EET; it contains one label with 6 positions for marking and one transparent cover in PVC. Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Ø8.2mm +0.2 0 +0.1 Noryl 2 Screws M4x30mm built-in insulation cap 17BI0 9mm - 0.3 Modular APD System Material including Part No. +0.3 19FT3V End Support 30mm - 0.6 Part No. Insulation Cap PoWER FEEDINg AND CoNNECTIoN 15 15 29.5 45A 50 90A Part No. Material Clamp Wire Size Electrical Rating 40017 Copper/Steel 8-2AWG (10-25mm2) 90A (600V AC/DC) 45A The Power Input Connector is optional. It can accommodate wires from 8 to 2AWG and is used for circuits up to 90A. 90A can be distributed over a 63A APD Busbar by using the Power Input Connector as a feeder in the center of the busbar. Note: Standard Female Quick Disconnects (0.250 x 0.032 in.) can be used for power feeding and between-busbar connections of up to 30A. Power Input Connectors (Part No. 40017) are only necessary for currents greater than 30A. Connection of Branch Circuits The APD Busbar have standard pins (6.3mm x 0.8mm) for female disconnects every 12mm. 83 disconnects are available per meter. Standard 0.250 in. female disconnects can be used for connections to achieve the following current ratings: 30A 20A 15A 10A with with with with 10AWG 12AWG 14AWG 16AWG 6.3 mm Modular APD System Power Input Connector 19.5 wire wire wire wire 12 mm 8 mm 19.8 mm 5.7 mm Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 25 ONE PHASE POWER DISTRIBUTION BLOCKS Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) • Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) • No caps to open or remove • Material Housing: Polyamide Metal Body: Brass 38049 • • • • 38041 SCCR: 100kA Part Number: White Gray SCCR: 100kA 38049 (UL File E98082) DB16 (UL File E220514) 38041 (UL File E98082) DB35 (UL File E220514) UL1059 Approvals Current Rating 80A 80A 115A 125A Voltage Rating 600V AC 690V AC 600V AC 690V AC No. of Inputs Wire Range Torque 1 8-4 AWG 13.5lb.-in. 1 6-16mm2 1.5Nm 1 8-2 AWG 31lb.-in. 1 10-35mm2 3.5Nm Screw Type No. of Outputs Wire Range Torque Wire Range Torque Screw Type Optional Marking Tag *(for DB16 and DB35) Pozi Drive 2 6 6 (2x)8-4 AWG (2x)6-16mm2 13.5lb.-in. 1.5Nm (4x)14-10 AWG (4x)2.5-6mm2 7.2lb.-in. 0.8Nm Pozi Drive 2 40lb.-in. for DB35 Pozi Drive 2 6 14-6 AWG 17.5lb.-in. 6 2.5-16mm2 2Nm Pozi Drive 2 MT2* MT2* Dimensions: 38041 Fork Type Busbar 38045 38041 Accessories: Fork Type Busbar Part No: 38045 to jump 2 Blocks 38046 to jump 8 Blocks can be cut 26 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 38076 38032 SCCR: 100kA Part Number: 38074 SCCR: 100kA 38076 SCCR: 100kA 38032 38074 Approvals UL File E98082 UL File E98082 UL File E98082 Current Rating 115A 125A 160A 160A 175A 175A Voltage Rating 600V AC 690V AC 600V AC 690V AC 600V AC 690V AC No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Screw Type 1 8-2 AWG 53lb.-in. 1 10-35mm2 6Nm 1 8-2/0AWG 35.5lb.-in. 1 10-70mm2 4Nm 1 6-2/0AWG 53lb.-in. 1 16-70mm2 6Nm 10 2.5-16mm2 3Nm 6 14-6 AWG 17.5lb.-in. 6 2.5-16mm2 2Nm 10 14-4 AWG 26.5lb.-in. Hex 5 Hex 3 Hex 5 Hex 3 10 2.5-16mm2 3Nm Hex 3 71 mm (2.80 in) 17.4 mm (0.69 in) 71 mm (2.80 in) 17.4 mm (0.69 in) 17.4 mm (0.69 in) Dimensions: 17.4 mm (0.69 in) 17.4 mm (0.69 in) 17.4 mm (0.69 in) UL1059 Hex 4 10 14-4 AWG 26.5lb.-in. 17.4 mm (0.69 in) 17.4 mm (0.69 in) 38032 38032 Copper Jumper Bar 3803221 Accessories: Copper Jumper Bar (6x15 mm) Part No: 3803221 for 2 Blocks 3803231 for 3 Blocks 3803241 for 4 Blocks can be cut Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 27 ONE PHASE POWER DISTRIBUTION BLOCKS • • • • Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) • Accessories increase the number of outputs with only one input. • No caps to open or remove • Material Housing: Polyamide Metal Body: Brass 38019 38020 SCCR: 100kA Part Number: SCCR: 100kA 38020 38019 Approvals UL1059 UL File E98082 UL File E98082 Current Rating 230A 250A 310A 400A Voltage Rating 600V AC 690V AC 600V AC 690V AC No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Wire Range Torque Wire Range Torque Screw Type 1 2-4/0AWG 170lb.-in. 1 35-120mm2 19Nm 1 3/0-350kcmil 230lb.-in. 1 95-185mm2 25Nm Hex 6 11 11 (2x) 14-2AWG (2x) 2.5-35mm2 31lb.-in. 3.5Nm (5x) 14-6AWG (5x) 2.5-16mm2 17.5lb.-in. 2Nm (4x) 14-8AWG (4x) 2.5-10mm2 17.5lb.-in. 2Nm standard screwdriver Hex 8 11 11 (2x) 14-2AWG (2x) 2.5-35mm2 31lb.-in. 3.5Nm (5x) 14-6AWG (5x) 2.5-16mm2 17.5lb.-in. 2Nm (4x) 14-8AWG (4x) 2.5-10mm2 17.5lb.-in. 2Nm standard screwdriver Dimensions: 28 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com THREE PHASE POWER DISTRIBUTION BLOCKS 38073 38075 • • • • Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices • Same compact size for both ratings • No caps to open or remove • Material Housing: Polyamide Metal Body: Brass 3 Pole 3 Pole SCCR: 100kA Part Number: SCCR: 100kA 38075 38073 Approvals UL File E98082 UL File E98082 Current Rating 115A 115A 175A 175A Voltage Rating 600V AC 690V AC 600V AC 690V AC No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Screw Type 3x1 8-2AWG 31lb.-in. 3x1 10-35mm2 3.5Nm 3x1 8-2/0AWG 35.5lb.-in. 3x1 10-70mm2 4Nm 3x6 2.5-16mm2 2Nm 3x6 14-4AWG 17.5 lb.-in. Hex 5 Hex 3 Dimensions: Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com UL1059 Hex 4 3x6 14-4AWG 17.5lb.-in. 3x6 2.5-16mm2 2Nm Hex 3 29 SPLICER TERMINAL BLOCKS 38057 38059 38064 38057 38059 UL File E98082 UL1059 Current Rating UL File E98082 175A 175A 600V AC 1 14-2/0 AWG UL File E98082 400A 400A Voltage Rating No. of Inputs Total Wire Range Screw Type No. of Outputs Total Wire Range Screw Type 690V AC 1 2.5mm²-70mm² Hex 5 1 1 14-2/0 AWG 2.5mm²-70mm² Hex 5 600V AC 690V AC 1 2 2 6 AWG-400kcmil 16mm²-185mm² Hex 10 1 1 6 AWG-400kcmil 16mm²-185mm² Hex 10 Torque Wire Range Torque Wire Range Torque Wire Range Torque Wire Range Torque 14-8 AWG 2.5mm²-10mm² 35 lb-in 3.9 Nm 6-2 AWG 16mm²-35mm² 80 lb-in 9.0 Nm 170 lb-in 1-2/0 AWG 50mm²-70mm² 100 lb-in 11.4 Nm - 6-3 AWG 16mm²-25mm² 130 lb-in 14.7 Nm 2-1/0 AWG 35mm²-50mm² 19.2 Nm 170 lb-in 19.2 Nm 2/0 AWG-400kcmil 70mm²-185mm² 220 lb-in 24.9 Nm - 1 39 mm [1.54 in] 124.4 mm [4.90 in] 145.5 mm [5.73 in] 72.3 mm (2.85 in) 34.7 mm (1.37 in) 43.2 mm (1.70 in) 59.6 mm (2.35 in) 800a 600V AC 690V AC 4 AWG-600kcmil 25mm²-300mm² Hex 10 2 2 4 AWG-600kcmil 25mm²-300mm² Hex 10 4-3 AWG 130 lb-in 2-1/0 AWG 2 5mm² 14.7 Nm 35mm²-50mm² 2/0 AWG-400kcmil 70mm²-185mm² 220 lb-in 24.9 Nm 500-600kcmil 300mm²-240mm² 310 lb-in 35.1 Nm 53.5 mm [2.11 in] 80.5 mm [3.17 in] 7 mm [0.28 in] 800A 129 mm [5.08 in] Part Number:: 38064 145 mm [5.71 in] • Quick mounting and wiring • IP20 Finger Safe • DIN Rail or Panel Mount • No caps to open or remove • Material Housing: Polyamide Metal Body: Aluminum 7.5 mm [0.30 in] 25.4 mm (1.0 in) 50 mm (1.97 in) 7 mm [0.28 in] 12 mm [0.47 in] 30 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 72 mm [2.83 in] 80.5 mm [3.17 in] INDEX Part No. Page 38019 . . . . . . . . . . . . . . . .28 38020 . . . . . . . . . . . . . . . .28 38032 . . . . . . . . . . . . . . . .27 38057 . . . . . . . . . . . . . . . .30 38059 . . . . . . . . . . . . . . . .30 38064 . . . . . . . . . . . . . . . .30 38073 . . . . . . . . . . . . . . . .29 38074 . . . . . . . . . . . . . . . .27 38075 . . . . . . . . . . . . . . . .29 17BIO . . . . . . . . . . . . . . . .24 17BS . . . . . . . . . . . . . . . .24 17EET . . . . . . . . . . . . . . .24 18/25CAP3P . . . . . . . . . .13 19FT3V . . . . . . . . . . . . . .24 1LB41-25A . . . . . . . . . . . .23 1LB83-25A . . . . . . . . . . . .23 1P16UL3/12 . . . . . . . . . . .16 1P16UL3/18 . . . . . . . . . . .16 1P16UL3/6 . . . . . . . . . . . .16 1P18U1/10 . . . . . . . . . . . . .6 1P18U1/11 . . . . . . . . . . . . .6 1P18U1/12 . . . . . . . . . . . . .6 1P18U1/13 . . . . . . . . . . . . .6 1P18U1/14 . . . . . . . . . . . . .6 1P18U1/15 . . . . . . . . . . . . .6 1P18U1/16 . . . . . . . . . . . . .6 1P18U1/17 . . . . . . . . . . . . .6 1P18U1/18 . . . . . . . . . . . . .6 1P18U1/19 . . . . . . . . . . . . .6 _1P18U1/2 . . . . . . . . . . . . .6 1P18U1/20 . . . . . . . . . . . . .6 1P18U1/21 . . . . . . . . . . . . .6 1P18U1/22 . . . . . . . . . . . . .6 1P18U1/23 . . . . . . . . . . . . .6 1P18U1/24 . . . . . . . . . . . . .6 1P18U1/25 . . . . . . . . . . . . .6 1P18U1/26 . . . . . . . . . . . . .6 1P18U1/27 . . . . . . . . . . . . .6 1P18U1/28 . . . . . . . . . . . . .6 1P18U1/29 . . . . . . . . . . . . .6 1P18U1/3 . . . . . . . . . . . . . .6 1P18U1/30 . . . . . . . . . . . . .6 1P18U1/31 . . . . . . . . . . . . .6 1P18U1/32 . . . . . . . . . . . . .6 1P18U1/33 . . . . . . . . . . . . .6 1P18U1/34 . . . . . . . . . . . . .6 1P18U1/35 . . . . . . . . . . . . .6 1P18U1/36 . . . . . . . . . . . . .6 1P18U1/37 . . . . . . . . . . . . .6 1P18U1/38 . . . . . . . . . . . . .6 1P18U1/39 . . . . . . . . . . . . .6 1P18U1/4 . . . . . . . . . . . . . .6 1P18U1/40 . . . . . . . . . . . . .6 1P18U1/41 . . . . . . . . . . . . .6 1P18U1/42 . . . . . . . . . . . . .6 1P18U1/43 . . . . . . . . . . . . .6 1P18U1/44 . . . . . . . . . . . . .6 1P18U1/45 . . . . . . . . . . . . .6 1P18U1/46 . . . . . . . . . . . . .6 1P18U1/47 . . . . . . . . . . . . .6 1P18U1/48 . . . . . . . . . . . . .6 1P18U1/49 . . . . . . . . . . . . .6 1P18U1/5 . . . . . . . . . . . . . .6 1P18U1/50 . . . . . . . . . . . . .6 1P18U1/51 . . . . . . . . . . . . .6 1P18U1/52 . . . . . . . . . . . . .6 1P18U1/53 . . . . . . . . . . . . .6 1P18U1/54 . . . . . . . . . . . . .6 1P18U1/55 . . . . . . . . . . . . .6 1P18U1/56 . . . . . . . . . . . . .6 1P18U1/57 . . . . . . . . . . . . .6 1P18U1/6 . . . . . . . . . . . . . .6 1P18U1/7 . . . . . . . . . . . . . .6 1P18U1/8 . . . . . . . . . . . . . .6 1P18U1/9 . . . . . . . . . . . . . .6 1P18U1H/10 . . . . . . . . . . .7 1P18U1H/11 . . . . . . . . . . .7 1P18U1H/12 . . . . . . . . . . .7 1P18U1H/13 . . . . . . . . . . .7 1P18U1H/14 . . . . . . . . . . .7 # Part No. Page 1P18U1H/15 . . . . . . . . . . .7 1P18U1H/16 . . . . . . . . . . .7 1P18U1H/17 . . . . . . . . . . .7 1P18U1H/18 . . . . . . . . . . .7 1P18U1H/19 . . . . . . . . . . .7 1P18U1H/2 . . . . . . . . . . . .7 1P18U1H/20 . . . . . . . . . . .7 1P18U1H/21 . . . . . . . . . . .7 1P18U1H/22 . . . . . . . . . . .7 1P18U1H/23 . . . . . . . . . . .7 1P18U1H/24 . . . . . . . . . . .7 1P18U1H/25 . . . . . . . . . . .7 1P18U1H/26 . . . . . . . . . . .7 1P18U1H/27 . . . . . . . . . . .7 1P18U1H/28 . . . . . . . . . . .7 1P18U1H/29 . . . . . . . . . . .7 1P18U1H/3 . . . . . . . . . . . .7 1P18U1H/30 . . . . . . . . . . .7 1P18U1H/31 . . . . . . . . . . .7 1P18U1H/32 . . . . . . . . . . .7 1P18U1H/33 . . . . . . . . . . .7 1P18U1H/34 . . . . . . . . . . .7 1P18U1H/35 . . . . . . . . . . .7 1P18U1H/36 . . . . . . . . . . .7 1P18U1H/4 . . . . . . . . . . . .7 1P18U1H/5 . . . . . . . . . . . .7 1P18U1H/6 . . . . . . . . . . . .7 1P18U1H/7 . . . . . . . . . . . .7 1P18U1H/8 . . . . . . . . . . . .7 1P18U1H/9 . . . . . . . . . . . .7 1TC41-100A . . . . . . . . . . .23 1TC41-63A . . . . . . . . . . . .23 1TC83-100A . . . . . . . . . . .23 1TC83-63A . . . . . . . . . . . .23 2LB41-25A . . . . . . . . . . . .23 2LB83-25A . . . . . . . . . . . .23 2P16UL3/12 . . . . . . . . . . .17 2P16UL3/18 . . . . . . . . . . .17 2P16UL3/6 . . . . . . . . . . . .17 2P18U3/10 . . . . . . . . . . . . .8 2P18U3/12 . . . . . . . . . . . . .8 2P18U3/14 . . . . . . . . . . . . .8 2P18U3/16 . . . . . . . . . . . . .8 2P18U3/18 . . . . . . . . . . . . .8 2P18U3/20 . . . . . . . . . . . . .8 2P18U3/22 . . . . . . . . . . . . .8 2P18U3/24 . . . . . . . . . . . . .8 2P18U3/26 . . . . . . . . . . . . .8 2P18U3/28 . . . . . . . . . . . . .8 2P18U3/30 . . . . . . . . . . . . .8 2P18U3/32 . . . . . . . . . . . . .8 2P18U3/34 . . . . . . . . . . . . .8 2P18U3/36 . . . . . . . . . . . . .8 2P18U3/38 . . . . . . . . . . . . .8 2P18U3/4 . . . . . . . . . . . . . .8 2P18U3/40 . . . . . . . . . . . . .8 2P18U3/42 . . . . . . . . . . . . .8 2P18U3/44 . . . . . . . . . . . . .8 2P18U3/46 . . . . . . . . . . . . .8 2P18U3/48 . . . . . . . . . . . . .8 2P18U3/50 . . . . . . . . . . . . .8 2P18U3/52 . . . . . . . . . . . . .8 2P18U3/54 . . . . . . . . . . . . .8 2P18U3/56 . . . . . . . . . . . . .8 2P18U3/6 . . . . . . . . . . . . . .8 2P18U3/8 . . . . . . . . . . . . . .8 2P18U3H/10 . . . . . . . . . . .9 2P18U3H/12 . . . . . . . . . . .9 2P18U3H/14 . . . . . . . . . . .9 2P18U3H/16 . . . . . . . . . . .9 2P18U3H/18 . . . . . . . . . . .9 2P18U3H/20 . . . . . . . . . . .9 2P18U3H/22 . . . . . . . . . . .9 2P18U3H/24 . . . . . . . . . . .9 2P18U3H/26 . . . . . . . . . . .9 2P18U3H/28 . . . . . . . . . . .9 2P18U3H/30 . . . . . . . . . . .9 2P18U3H/32 . . . . . . . . . . .9 2P18U3H/34 . . . . . . . . . . .9 2P18U3H/36 . . . . . . . . . . .9 Part No. Page 2P18U3H/38 . . . . . . . . . . .9 2P18U3H/4 . . . . . . . . . . . .9 2P18U3H/40 . . . . . . . . . . .9 2P18U3H/42 . . . . . . . . . . .9 2P18U3H/44 . . . . . . . . . . .9 2P18U3H/46 . . . . . . . . . . .9 2P18U3H/48 . . . . . . . . . . .9 2P18U3H/50 . . . . . . . . . . .9 2P18U3H/52 . . . . . . . . . . .9 2P18U3H/54 . . . . . . . . . . .9 2P18U3H/56 . . . . . . . . . . .9 2P18U3H/6 . . . . . . . . . . . .9 2P18U3H/8 . . . . . . . . . . . .9 2P25U3/10 . . . . . . . . . . . . .8 2P25U3/12 . . . . . . . . . . . . .8 2P25U3/14 . . . . . . . . . . . . .8 2P25U3/16 . . . . . . . . . . . . .8 2P25U3/18 . . . . . . . . . . . . .8 2P25U3/20 . . . . . . . . . . . . .8 2P25U3/22 . . . . . . . . . . . . .8 2P25U3/24 . . . . . . . . . . . . .8 2P25U3/26 . . . . . . . . . . . . .8 2P25U3/28 . . . . . . . . . . . . .8 2P25U3/30 . . . . . . . . . . . . .8 2P25U3/32 . . . . . . . . . . . . .8 2P25U3/34 . . . . . . . . . . . . .8 2P25U3/36 . . . . . . . . . . . . .8 2P25U3/38 . . . . . . . . . . . . .8 2P25U3/4 . . . . . . . . . . . . . .8 2P25U3/40 . . . . . . . . . . . . .8 2P25U3/42 . . . . . . . . . . . . .8 2P25U3/44 . . . . . . . . . . . . .8 2P25U3/46 . . . . . . . . . . . . .8 2P25U3/48 . . . . . . . . . . . . .8 2P25U3/50 . . . . . . . . . . . . .8 2P25U3/52 . . . . . . . . . . . . .8 2P25U3/54 . . . . . . . . . . . . .8 2P25U3/56 . . . . . . . . . . . . .8 2P25U3/6 . . . . . . . . . . . . . .8 2P25U3/8 . . . . . . . . . . . . . .8 2P25U3H/10 . . . . . . . . . . .9 2P25U3H/12 . . . . . . . . . . .9 2P25U3H/14 . . . . . . . . . . .9 2P25U3H/16 . . . . . . . . . . .9 2P25U3H/18 . . . . . . . . . . .9 2P25U3H/20 . . . . . . . . . . .9 2P25U3H/22 . . . . . . . . . . .9 2P25U3H/24 . . . . . . . . . . .9 2P25U3H/26 . . . . . . . . . . .9 2P25U3H/28 . . . . . . . . . . .9 2P25U3H/30 . . . . . . . . . . .9 2P25U3H/32 . . . . . . . . . . .9 2P25U3H/34 . . . . . . . . . . .9 2P25U3H/36 . . . . . . . . . . .9 2P25U3H/38 . . . . . . . . . . .9 2P25U3H/4 . . . . . . . . . . . .9 2P25U3H/40 . . . . . . . . . . .9 2P25U3H/42 . . . . . . . . . . .9 2P25U3H/44 . . . . . . . . . . .9 2P25U3H/46 . . . . . . . . . . .9 2P25U3H/48 . . . . . . . . . . .9 2P25U3H/50 . . . . . . . . . . .9 2P25U3H/52 . . . . . . . . . . .9 2P25U3H/54 . . . . . . . . . . .9 2P25U3H/56 . . . . . . . . . . .9 2P25U3H/6 . . . . . . . . . . . .9 2P25U3H/8 . . . . . . . . . . . .9 2TC41-100A . . . . . . . . . . .23 2TC41-63A . . . . . . . . . . . .23 2TC83-100A . . . . . . . . . . .23 2TC83-63A . . . . . . . . . . . .23 38041 . . . . . . . . . . . . . . . .26 38049 . . . . . . . . . . . . . . . .26 38076 . . . . . . . . . . . . . . . .27 3P16UL3/12 . . . . . . . . . . .18 3P16UL3/18 . . . . . . . . . . .18 3P16UL3/6 . . . . . . . . . . . .18 3P18U3/12 . . . . . . . . . . . .10 3P18U3/15 . . . . . . . . . . . .10 3P18U3/18 . . . . . . . . . . . .10 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Part No. Page 3P18U3/21 . . . . . . . . . . . .10 3P18U3/24 . . . . . . . . . . . .10 3P18U3/27 . . . . . . . . . . . .10 3P18U3/30 . . . . . . . . . . . .10 3P18U3/33 . . . . . . . . . . . .10 3P18U3/36 . . . . . . . . . . . .10 3P18U3/39 . . . . . . . . . . . .10 3P18U3/42 . . . . . . . . . . . .10 3P18U3/45 . . . . . . . . . . . .10 3P18U3/48 . . . . . . . . . . . .10 3P18U3/51 . . . . . . . . . . . .10 3P18U3/54 . . . . . . . . . . . .10 3P18U3/57 . . . . . . . . . . . .10 3P18U3/6 . . . . . . . . . . . . .10 3P18U3/9 . . . . . . . . . . . . .10 3P18U3H/12 . . . . . . . . . .11 3P18U3H/15 . . . . . . . . . .11 3P18U3H/18 . . . . . . . . . .11 3P18U3H/21 . . . . . . . . . .11 3P18U3H/24 . . . . . . . . . .11 3P18U3H/27 . . . . . . . . . .11 3P18U3H/30 . . . . . . . . . .11 3P18U3H/33 . . . . . . . . . .11 3P18U3H/36 . . . . . . . . . .11 3P18U3H/39 . . . . . . . . . .11 3P18U3H/42 . . . . . . . . . .11 3P18U3H/45 . . . . . . . . . .11 3P18U3H/48 . . . . . . . . . .11 3P18U3H/51 . . . . . . . . . .11 3P18U3H/54 . . . . . . . . . .11 3P18U3H/57 . . . . . . . . . .11 3P18U3H/6 . . . . . . . . . . .11 3P18U3H/9 . . . . . . . . . . .11 3P25U3/12 . . . . . . . . . . . .10 3P25U3/15 . . . . . . . . . . . .10 3P25U3/18 . . . . . . . . . . . .10 3P25U3/21 . . . . . . . . . . . .10 3P25U3/24 . . . . . . . . . . . .10 3P25U3/27 . . . . . . . . . . . .10 3P25U3/30 . . . . . . . . . . . .10 3P25U3/33 . . . . . . . . . . . .10 3P25U3/36 . . . . . . . . . . . .10 3P25U3/39 . . . . . . . . . . . .10 3P25U3/42 . . . . . . . . . . . .10 3P25U3/45 . . . . . . . . . . . .10 3P25U3/48 . . . . . . . . . . . .10 3P25U3/51 . . . . . . . . . . . .10 3P25U3/54 . . . . . . . . . . . .10 3P25U3/57 . . . . . . . . . . . .10 3P25U3/6 . . . . . . . . . . . . .10 3P25U3/9 . . . . . . . . . . . . .10 3P25U3H/12 . . . . . . . . . .11 3P25U3H/15 . . . . . . . . . .11 3P25U3H/18 . . . . . . . . . .11 3P25U3H/21 . . . . . . . . . .11 3P25U3H/24 . . . . . . . . . .11 3P25U3H/27 . . . . . . . . . .11 3P25U3H/30 . . . . . . . . . .11 3P25U3H/33 . . . . . . . . . .11 3P25U3H/36 . . . . . . . . . .11 3P25U3H/39 . . . . . . . . . .11 3P25U3H/42 . . . . . . . . . .11 3P25U3H/45 . . . . . . . . . .11 3P25U3H/48 . . . . . . . . . .11 3P25U3H/51 . . . . . . . . . .11 3P25U3H/54 . . . . . . . . . .11 3P25U3H/57 . . . . . . . . . .11 3P25U3H/6 . . . . . . . . . . .11 3P25U3H/9 . . . . . . . . . . .11 400017 . . . . . . . . . . . . . . .25 BRS5 . . . . . . . . . . . . . . . .13 BRUL . . . . . . . . . . . . . . . .19 DB16 . . . . . . . . . . . . . . . .26 DB35 . . . . . . . . . . . . . . . .26 P35ULT . . . . . . . . . . . . . .19 P50UB . . . . . . . . . . . . . . .12 P50ULB . . . . . . . . . . . . . .19 P50UT . . . . . . . . . . . . . . .12 P95UB . . . . . . . . . . . . . . .13 31 R-Series E301611 Altech UL1077 UL1077 Recognized Supplementary Protector 32 • DIN Rail Mounted • 17.5mm width per pole • Thermal Magnetic • 480Y/277V AC, 50/60Hz • 10kA Short Circuit Withstand Capacity • Positive Trip indicator (Green - off/tripped, Red - on) • Applications (on the load side of Branch Circuit Protection) include: Sensitive Electronics, Power Supplies, Appliance circuits, etc. Voltage Rating 480Y/277VAC Interrupting Capacity (IEC/EN60898/60947-2) 0.5-63A (RC): 10kA Short Circuit Withstand Rating (UL - Ratings) 0.5-6A (RC): 10kA with no back-up fuse 8-63A (RC): 10kA with UL-listed Class J back-up fuse; 5kA with no back-up fuse Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com V-EA Series Altech UL508 508 listed E137938 C22.2 No.14 certified LR104391 UL508 Listed Manual Motor Controller “Suitable as Motor Disconnect” • • • • • DIN Rail Mounted 17.5mm width per pole Thermal Magnetic 480Y/277V AC, 50/60Hz 10kA Short Circuit Withstand Capacity • Applications Include: • • • • • AC Motor Starting, Across the Line AC General Use AC Resistance AC Discharge Lamps (Ballast) AC Incandescent Lamps (Tungsten) Voltage Rating Short Circuit Withstand Rating (UL/CSA - Ratings) L-Series, AC or DC group Short Circuit Withstand Rating (UL/CSA - Ratings) 480Y/277VAC 0.3-25A: 1 pole - 42VDC; 2 Pole - 80VDC 30-60A: 1 pole - 24VDC; 2 Pole - 60VDC 0.3-60A (RC): 10kA with UL-listed RK5 back-up fuse or MCCB 0.3-10A (RC): 10kA; 13-60A (RC): 5kA no branch circuit protection required Altech UL489 Miniature Molded Case Circuit Breakers LISTED E305318 UL489 Listed Circuit Breakers • Available in AC and DC models • DIN Rail Mounted • 17.5mm width • Thermal Magnetic • 240V, 480Y/277V AC, 50/60Hz • 125VDC (1 pole); 250VDC (2pole) • 10kA Short Circuit Current/ Voltage Rating Interrupting Capacity • Positive Trip indicator AC Short Circuit Interrupting Rating (Green - off/tripped, Red - on) • HACR Type 40°C DC Short Circuit Interrupting Rating • Line/Load reversible # 0.2-63A/240VAC, 0.2-32A/480Y/277VAC 0.2-63A/125/250VDC 0.2-32A: 1 pole - 10kA@120, 240, 277V; 2-4 poles - 10kA@120, 240V, 480Y/277V; 33-63A: 1-4 poles - 10kA@120, 240V 0.2-32A: 1-2 poles - 10kA@125V; 33-63A: 1-2 poles - 10kA@250V Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 33 STANDARD TERMS AND CoNDITIoNS oF SALE TITLE - Title to the products of ALTECH shall remain with ALTECH until payment is made in full by Customer. Such reservation of title is for the purpose of securing the purchase price and shall not relieve Customer of the duty to inspect the products upon receipt, to notify ALTECH of any deficiencies or defects, and to exercise due care in the use, installation, operation, and maintenance of the products when on the premise of the Customer or under the control of the Customer. Notwithstanding any reservation of title by ALTECH, risk of loss shall pass to customer at any time of shipment. SHIPMENT AND DELIVERY - All orders for destination in the mainland United States (less Hawaii, Alaska and non-continental United States possessions) will be shipped F.O.B. Flemington, N.J. All destination, shipping and other charges shall be paid by the Customer in accordance with ALTECH’s then current shipping and billing practices. Delivery dates given in the acceptance of any order are approximate. ALTECH shall not be liable for delays in delivery or in performance due to causes beyond its reasonable control including acts of God, acts of Customer, acts of civil or military authority, fires, strikes or other labor disturbances, war, riot or delays in transportation. In the event of such delay, the date of delivery or performance shall be extended for a period equal to the time lost by reason of the delay. PRICE - PRICES in any ALTECH publication are subject to change without prior notification. Catalog prices are based on prices published in the current price list. All written quotations are valid for thirty (30) days from the date of quotation. Customer shall pay all sales, use, excise or similar taxes whenever ALTECH must itself pay and/or collect such tax from Customer arising out of the sale. PAYMENT - Customer agrees to make payment within thirty (30) days of date of the invoice from ALTECH. Customer agrees to pay a late payment charge of one and one-half percent (1.5% per month, or the maximum late payment charge permitted by applicable law, whichever is less, on any unpaid amount for each calendar month (or fraction thereof) that such payment is in default. Orders amounting to less than 100.00 will be billed at 100.00 plus freight. Full carton purchases are required. In the event of referral to an attorney for collection, reasonable attorney’s fees for collection of the overdue amount shall be paid by Customer. In the event payment is not received within 30 days from the date of invoice, any discount shall be cancelled and the full list price will be due. LIMITED WARRANTY - ALTECH warrants to Customer that the equipment purchases shall be free from defects in material and workmanship under normal use and service for a period of one year from shipment. Written notice as an explanation of the circumstances of any claim that the equipment has proved defective in material or workmanship shall be given promptly by the Customer to ALTECH. ALTECH will not be liable for any misuse, improper operations, improper installation, improper maintenance, alteration, modification, accident or unusual degradation of the equipment or parts due to an unsuitable installation environment. No representation of other affirmation of facts, including but not limited to statements regarding capacity, suitability for use or performance of the equipment, shall be or be deemed to be a warranty or representation by ALTECH for any purpose, nor give rise to any liability or obligation of ALTECH whatsoever. Customer’s sole and exclusive remedy in the event of breach of warranty, as set forth herein, is expressly limited to (1) the correction of the defect by adjustment, repair, modification, or replacement, or (2) issuance of a credit or refund of the purchase price for the defective equipment at ALTECH’s election and sole expense. EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY EXTENDS ONLY TO THE CUSTOMER FROM ALTECH OR ITS AUTHORIZED DISTRIBUTOR. LIMITATIoN oF LIABILITY - IN NO EVENT, SHALL ALTECH BE LIABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF ANY BREACH OF THIS AGREEMENT OR OBLIGATIONS UNDER THE AGREEMENT. ALTECH SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY DELAY IN SHIPMENT, INSTALLATION OR FURNISHING OF EQUIPMENT OR SERVICES UNDER THIS AGREEMENT. No action arising out of any claimed breach of this Agreement may be brought by either party more than two (2) years after the cause of action has accrued. 34 PATENT INDEMNITY - ALTECH shall defend or settle any suit or proceeding brought against Customer based on a claim that any equipment made to ALTECH design and furnished hereunder constitutes an infringement of any existing United States patent, provided (ALTECH) is notified promptly in writing and is given complete authorization and information required for the defense, and ALTECH shall pay all damages and costs awarded against Customer, but shall not be responsible for any costs, expense or compromise incurred or made by Customer without ALTECH’s prior written consent. If any equipment is in ALTECH’s opinion likely to or does become the subject of a claim for patent infringement, ALTECH may at its option and expense procure for Customer the right to continue using the device, modify it to become non-infringing, but in the event ALTECH is not reasonably able to modify, substitute, or otherwise procure for Customer the right to continue using it, ALTECH will remove such equipment and refund to Customer the amount paid in excess of a reasonable rental for past use. ALTECH shall not be liable for any infringement or claim based upon use of the equipment in combination with other equipment not supplied by ALTECH or with modifications made by Customer. The foregoing states the entire liability of ALTECH to Customer arising from patent infringement. SELLER’S REMEDIES - Should Customer fail to make any payment within ten (10) days of its due date, or fail to perform any other of the Customer’s obligation hereunder upon thirty (30) days written notice, or should Customer be or become insolvent or be a party to any bankruptcy receivership proceeding prior to full payment of all amounts payable hereunder, ALTECH may: (a) with or without demand or notice to customer declare the entire amount unpaid immediately due and payable; (b) enter upon the premises where the equipment may be found and remove it (Customer shall assemble the equipment and make it available to ALTECH at a place reasonably convenient to both parties and shall permit and assist ALTECH in effecting the retaking and removal of the equipment); and (c) sell any or all the equipment as permitted under applicable law, applying the proceeds of the sale to payment of the expenses of retaking, repairing and selling the equipment, reasonable attorney fees and to the satisfaction of all indebtedness then due and unpaid under this Agreement. Any surplus shall be paid to Customer and any deficiency shall be paid to ALTECH by Customer. The remedies provided herein shall be cumulative and in addition to all other remedies provided by law or equity or under the Uniform Commercial Code. goVERNINg LAW - This agreement will be governed by the Laws of the State of New Jersey. gENERAL - This Agreement shall only become effective and binding when either (a) it has been accepted and executed by an authorized representative of ALTECH, or (b) the equipment has been shipped to Customer, with or without acceptance in writing hereon. Notice of acceptance is hereby waived by Customer. Customer hereby acknowledges receipt of a true and complete copy hereof. No addition to or modification of any of the Terms and Conditions of Sale as they appear herein shall be binding upon ALTECH unless signed in writing by duly authorized representative of ALTECH in Flemington, N.J. Typographical and clerical errors in quotations, orders and acknowledgments are subject to correction. This Agreement is not assignable without the prior written consent of ALTECH. Any attempt to assign any of the rights, duties or obligations of this Agreement without such consent is void. If any provision or provisions of this Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability, of the remaining provisions shall not in any way be affected or impaired thereby. ALTECH is not responsible for failure to fulfill its obligation under this Agreement due to causes beyond its control, or except as agreed herein. THE CUSTOMER ACKNOWLEDGES THAT HE HAS READ THE AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. FURTHERMORE, THE CUSTOMER AGREES THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN THE PARTIES, WHICH SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, AND ALL OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Here are other great products available from Altech! Circuit Protection Devices Contactors and More! Altech the market leader in UL508 Manual Motor Controllers/ Miniature Circuit Breakers now introduces UL489 Miniature Circuit Breakers and UL1077 Supplementary Protectors. The UL489 versions are DIN rail mounted, 17.5mm wide, thermal magnetic, 240V, 480Y/277V AC, 50/60Hz, 125 and 250 VDC models, with short circuit interrupt capacity of 10kA, a positive trip indicator, and are line/load reversible. The UL1077 versions are DIN rail mounted, 17.5mm wide, thermal magnetic, 480Y/277V AC, 50/60Hz, a short circuit withstand capacity 10kA, have a positive trip indicator. Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 FAX 908-806-9490 www.altechcorp.com Altech’s now carries contactors, mini contactors, definite purpose contactors & overload relays. The contactors come in 3 and 4 pole configurations at 9A to 800A. Available in Single Phase (115 -230V) and Three Phase (200 - 575V) AC and DC models. A large variety of coil voltages are supported and the accessories are auxiliary contacts and overload relays. The mini contactors come in screw clamp, fast-on, cage clamp and solder pin types. Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 www.altechcorp.com Industrial Enclosures Altech offers a wide range of DIN Rail or panel mount cable interface modules, relay interface modules, power supplies, carrier modules, and custom designed modules. Cable to connector models include: D-Sub connectors, ribbon cable connectors, and Dip socket connectors to terminals. Standard relay modules from 1 to 16 channels, and safety relay modules from 1 to 16 channels and up to 10 poles are included. The catalog also contains switching power supplies, linear power supplies, and custom designed interface modules. Terminal Blocks Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 FAX 908-806-9490 www.altechcorp.com Altech offers a NEW Terminal Block catalog with the most competitively priced blocks in the industry. We feature screw and spring clamp models for DIN rail and panel mount applications. This advanced line of wire termination products will increase your design options and help to get the job done more efficiently. Our line of blocks include feedthrough (single, double or triple level), distribution, ground, fuse, disconnect, thermocouple, surge suppressor and indicator. A wide variety of accessories, tools and ferrules are available. Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 FAX 908-806-9490 www.altechcorp.com Liquid Tight Strain Reliefs Altech’s expanded line of TK Industrial Enclosures, with metric knockouts, is here. Now our entire line of industrial enclosures is in metric. Metric knockouts align with international standards making selection easier and more universal. Plus the PG standard is still available. All of Altech’s enclosures are internationally accepted and stand up to the harshest environments. They protect against dust, water and corrosion while enhancing the value of your product. Rated up to IP66 (NEMA type 4x), Altech enclosures are available in a wide range of sizes. DIN Rail Power Supplies Interface Modules and Power Supplies Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 www.altechcorp.com Altech DIN RAIL mountable power supplies have Universal AC input. They are suitable for industrial and automation applications. • UL508 Listed • Installed on DIN rail TS35/ 7.5 or 15 • Available from 30-960W • Protections: Short circuit / Overload / Over-voltage / Over temperature • Cooling by free air convection • Worldwide approvals • 3 year warranty Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 FAX 908-806-9490 www.altechcorp.com This 64-page catalog introduces Altech’s full line Liquid Tight Strain Reliefs (Cord Grips) which are used to seal cable entries, keep contaminant’s from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures. Available in standard, highperformance, and economy versions, functions include Straight-Through, Increased Strain Relief, Bend Protection, Pull/Bend Protection, Multi-conductor, Flat Cable and EMI/RFI. They can be used with almost any type of cable, cord or conductor - solid, stranded, flat, shielded, high temperature, etc. Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 FAX 908-806-9490 www.altechcorp.com Motor Disconnect Switches Altech’s line of Motor Disconnect Switches are UL 508 listed as Manual Motor Controllers for AC Motor Starting Across-the-line and AC General use. This new 16 page catalog includes the 3 different handle designs, which are all available in gray/black or yellow/red housings. Electrical ratings are 25-150A / 600V. The switches are non-fused DIN Rail mountable. Neat features include: snap-on auxiliary switches, door mounting kit and a retrofit 30A fuse holder. Also featured are Enclosed Motor Disconnect Switches & Fused Enclosed Motor Disconnect Switch (30A) in plastic or stainless housings. Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 908-806-9400 www.altechcorp.com Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 35 Altech Corporation 35 Royal Road Flemington, NJ 08822-6000 P 908.806.9400 • F 908.806.9490 www.altechcorp.com Altech Corp.® 348-102013-2M Printed October 2013
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2013:11:12 15:23:23-05:00 Creator : QuarkXPress(R) 9.52 Modify Date : 2014:03:12 15:45:45-04:00 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : QuarkXPress(R) 9.52 Metadata Date : 2014:03:12 15:45:45-04:00 Producer : QuarkXPress(R) 9.52 Format : application/pdf Title : Layout 1 Document ID : uuid:6a70ffa8-64a4-4343-85ab-a559070f9b81 Instance ID : uuid:9be4a216-2dc9-244f-b0dd-cf1117808f98 Page Count : 36EXIF Metadata provided by EXIF.tools