115784 Catalog
2014-09-27
: Pdf 115784-Catalog 115784-Catalog 005793 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 36
Altech Corporation
35 Royal Road
Flemington, NJ 08822-6000
P 908.806.9400 • F 908.806.9490
www.altechcorp.com
Altech Corp.® 348-102013-2M
Printed October 2013
Quality
Commitment
Altech’s control components meet
diverse national and international
standards such as UL, NEC, CSA IEC VDE and more. Altech
provides superior customer service and delivery through Total
Quality Management and Continuous Process Improvement.
Altech is ISO 9001 approved. We perform these services with
honesty and integrity and are committed to achieve these goals.
Altech Corp. expands its
Altech Corp. expands its
Busbar System and Power Distribution Lines!
Busbar System and Power Distribution Lines!
Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial
control components. Headquartered in Flemington, NJ, Altech has an experienced staff of engineering,
manufacturing and sales personnel to provide the highest quality products with superior service. This is the
Altech Commitment!
Altech Corp., a leading supplier of busbar systems in the US Market, has expanded its Busbar System Line and
added a new Power Distribution System to its broad range of products.
Altech has an established line of UL1077/ UL508 Busbars with ratings up to 200A. They are UL recognized
and listed for use with most competitor’s supplementary protectors and manual motor controllers.
Altech has added a new line of UL489 Busbars to its product range with ratings of up to 115A. They are UL
recognized for use with most of Altech’s competitor’s UL489 Miniature Circuit Breakers.
Altech’s new Power Distribution System is a new way to simplify existing wiring methods inside a panel. It is
modular, highly efficient and cost effective.
The Distribution Blocks are already established and the line was expanded for a greater variety. They are rated
up to 310A. A new range of Input connector Blocks up to 800A was introduced to complete Altech’s Power
Distribution Block line.
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
2
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
Table of Contents
Universal Voltage Power Distribution Systems
UL1077 / UL508 Busbars
•Overview/ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
•Feeding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
•1 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
•2 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
•3 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
• Power Feed Devices/ Accessories . . . . . . . . . . . . . . . . . . . .12-13
UL489 Busbars
•Overview/ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
•Feeding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
•1 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
•2 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
•3 Phase Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
•Power Feed Devices/ Accessories . . . . . . . . . . . . . . . . . . . . . .19
•Configuration and Assembly of UL489 Busbars . . . . . . . . . . . .20
•Busbar Selection Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
APD Power Distribution System
• Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
• APD Busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
• Fixing and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
• Power Feeding and Connection . . . . . . . . . . . . . . . . . . . . . . . . .25
Power Distribution Blocks/ Splicer Terminal Blocks
• 1 Phase Distribution Blocks (80A – 310A) . . . . . . . . . . . . . . .26-28
• 3 Phase Distribution Blocks (115A – 175A) . . . . . . . . . . . . . . . .29
• Splicer Terminal Blocks (175A – 800A) . . . . . . . . . . . . . . . . . . . .30
Miniature Circuit Breaker Short Form . . . . . . . . . . . . . . . . . . . . . .31-32
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Altech UL1077Altech UL508Altech UL489Modular APD SystemAltech UL1059
3
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
4
Altech UL1077/508
Busbar System
UL1077/508
Listed Busbars
The Altech Busbar System is an
innovative way to jumper up to 57
poles of Manual Motor Controllers
(MMC) and Supplementary
Protectors (SP).
The advantages of this busbar
system are:
•30% Installation time savings
•Panel space savings
•Reduced maintenance
•High electrical ratings
UL1077/508 Busbar System
•1-57 different pin configurations
•1/2 pole spacing (auxiliary switch) available
•Power Feeding:
Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A)
•UL recognized and listed for Altech’s R-Series, V-EA Series and MA Series of
Manual Motor Controllers and Supplementary Protectors
•UL recognized and listed for use with most popular UL1077 supplementary
protectors and UL508 Manual Motor Controllers in the market.
•Customers can cut the Busbar without losing the UL approval
•Line/Load reversible
Technical Specifications Busbars UL1077/ 508
Material of Busbar Copper
Material of Insulation (Housing) Polyamid
Electrical Ratings 18mm2: 80A/480VAC
25mm2: 100A/480VAC
Short Circuit Withstand Rating 10kA
Applying Standards UL508, VDE0660 Part 100 and 502,
VDE 0606, VDE 0659
UL508 listed
E205412
Universal UL1077/508 Busbar
fits most Supplementary Protectors
and Manual Motor Controllers
in the market!
Please contact Altech for details and further information.
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 5
Altech UL1077/508 Busbar System
Power Feed Methods
1) Start/ End Feed Method
P50UT* / P50UB*
With the P50UT Power Feed Lug or the P50UB Modular
Direct Power Feed as a Start/End Feeding Device a
maximum input current of 80A/100A per Phase can be
achieved. 80A with 18mm² Busbar and 100A with 25mm²
Busbar.
2) Center/ Middle Feed Method
P50UT* / P50UB*
With the P50UT Power Feed Lug or the P50UB Modular
Direct Power Feed as a Center/Middle Feeding Device a
maximum input current of 115A per Phase can be achieved.
(18mm²: 80A + 35A; 25mm²: 100A + 15A)
P95UB*
With the P95UB Power Feed Block as a Center/Middle
Feeding Device a maximum input current of 160A/200A per
Phase can be achieved (160A with 18mm² Busbar and 200A
with 25mm² Busbar).
Note: The Power Feed Block can only be used with a
standard spacing 3 Phase UL1077/508 Busbar.
*For complete specifications and description of Feeding Devices see page 12-13.
80A/100A
80A/100A
80A/100A
35A/15A
35A/15A
35A/15A
12
115A per phase
(P50UT)
3
80A/100A
80A/100A
80A/100A
35A/15A
35A/15A
35A/15A
(P50UB)
12
115A per phase
3
80A/100A 80A/100A
80A/100A
12
80A/100A per phase
(P50UT)
3
12
80A/100A per phase
3
80A/100A 80A/100A
80A/100A
(P50UB)
123
80/100A
80/100A
80/100A
80/100A
80/100A
80/100A
160A/200A per phase
(P95UB)
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
6
UL508 listed
E205412
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
1P18U1/2 2 2x1 pole 32.5
1P18U1/3 3 3x1 pole 50.3
1P18U1/4 4 4x1 pole 68.0
1P18U1/5 5 5x1 pole 85.8
1P18U1/6 6 6x1 pole 103.5
1P18U1/7 7 7x1 pole 121.3
1P18U1/8 8 8x1 pole 139.0
1P18U1/9 9 9x1 pole 156.8
1P18U1/10 10 10x1 pole 174.5
1P18U1/11 11 11x1 pole 192.3
1P18U1/12 12 12x1 pole 210.0
1P18U1/13 13 13x1 pole 227.8
1P18U1/14 14 14x1 pole 245.5
1P18U1/15 15 15x1 pole 263.3
1P18U1/16 16 16x1 pole 281.0
1P18U1/17 17 17x1 pole 298.8
1P18U1/18 18 18x1 pole 316.5
1P18U1/19 19 19x1 pole 334.3
1P18U1/20 20 20x1 pole 352.0
1P18U1/21 21 21x1 pole 369.8
1P18U1/22 22 22x1 pole 387.5
1P18U1/23 23 23x1 pole 405.3
1P18U1/24 24 24x1 pole 423.0
1P18U1/25 25 25x1 pole 440.8
1P18U1/26 26 26x1 pole 458.5
1P18U1/27 27 27x1 pole 476.3
1P18U1/28 28 28x1 pole 494.0
1P18U1/29 29 29x1 pole 511.8
3.5 mm (0.14 in.) 17.8 mm (0.70 in.)
56 x 17.8 = 996.8 mm (39.24 in.)
1007 mm (39.65 in.)
15 mm (0.59 in.)
2 mm (0.79 in.)
15 mm (0.59 in.)
1 PHASE BUSBAR - standard spacing
18mm2for 80A
ACCESSORIES
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
1P18U1/30 30 30x1 pole 529.5
1P18U1/31 31 31x1 pole 547.3
1P18U1/32 32 32x1 pole 565.0
1P18U1/33 33 33x1 pole 582.8
1P18U1/34 34 34x1 pole 600.5
1P18U1/35 35 35x1 pole 618.3
1P18U1/36 36 36x1 pole 636.0
1P18U1/37 37 37x1 pole 653.8
1P18U1/38 38 38x1 pole 671.5
1P18U1/39 39 39x1 pole 689.3
1P18U1/40 40 40x1 pole 707.0
1P18U1/41 41 41x1 pole 724.8
1P18U1/42 42 42x1 pole 742.5
1P18U1/43 43 43x1 pole 760.3
1P18U1/44 44 44x1 pole 778.0
1P18U1/45 45 45x1 pole 795.8
1P18U1/46 46 46x1 pole 813.5
1P18U1/47 47 47x1 pole 831.3
1P18U1/48 48 48x1 pole 849.0
1P18U1/49 49 49x1 pole 866.8
1P18U1/50 50 50x1 pole 884.5
1P18U1/51 51 51x1 pole 902.3
1P18U1/52 52 52x1 pole 920.0
1P18U1/53 53 53x1 pole 937.8
1P18U1/54 54 54x1 pole 955.5
1P18U1/55 55 55x1 pole 973.3
1P18U1/56 56 56x1 pole 991.0
1P18U1/57 57 57x1 pole 1008.8
Type/Cat. No: P50UT P50UB BRS5
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 7
UL508 listed
E205412
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
1P18U1H/2 2 2x1 pole 39.0
1P18U1H/3 3 3x1 pole 66.0
1P18U1H/4 4 4x1 pole 93.0
1P18U1H/5 5 5x1 pole 120.0
1P18U1H/6 6 6x1 pole 147.0
1P18U1H/7 7 7x1 pole 174.0
1P18U1H/8 8 8x1 pole 201.0
1P18U1H/9 9 9x1 pole 228.0
1P18U1H/10 10 10x1 pole 255.0
1P18U1H/11 11 11x1 pole 282.0
1P18U1H/12 12 12x1 pole 309.0
1P18U1H/13 13 13x1 pole 336.0
1P18U1H/14 14 14x1 pole 363.0
1P18U1H/15 15 15x1 pole 390.0
1P18U1H/16 16 16x1 pole 417.0
1P18U1H/17 17 17x1 pole 444.0
1P18U1H/18 18 18x1 pole 471.0
1P18U1H/19 19 19x1 pole 498.0
36 x 27 = 972 mm (38.27 in.)
27 mm (1.06 in.)
4mm (0.16 in.)
15 mm (0.59 in.)
15 mm (0.59 in.)
2 mm (0.79 in.)
982 mm (38.66 in.)
1 PHASE BUSBAR - 1/2 pole spacing
18mm2for 80A
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
1P18U1H/20 20 20x1 pole 525.0
1P18U1H/21 21 21x1 pole 552.0
1P18U1H/22 22 22x1 pole 579.0
1P18U1H/23 23 23x1 pole 606.0
1P18U1H/24 24 24x1 pole 633.0
1P18U1H/25 25 25x1 pole 660.0
1P18U1H/26 26 26x1 pole 687.0
1P18U1H/27 27 27x1 pole 714.0
1P18U1H/28 28 28x1 pole 741.0
1P18U1H/29 29 29x1 pole 768.0
1P18U1H/30 30 30x1 pole 795.0
1P18U1H/31 31 31x1 pole 822.0
1P18U1H/32 32 32x1 pole 849.0
1P18U1H/33 33 33x1 pole 876.0
1P18U1H/34 34 34x1 pole 903.0
1P18U1H/35 35 35x1 pole 930.0
1P18U1H/36 36 36x1 pole 957.0
ACCESSORIES
Type/Cat. No: P50UT P50UB BRS5
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
8
UL508 listed
E205412
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
2P18U3/4 4 2x2 pole 66.3
2P18U3/6 6 3x2 pole 101.8
2P18U3/8 8 4x2 pole 137.3
2P18U3/10 10 5x2 pole 172.8
2P18U3/12 12 6x2 pole 208.3
2P18U3/14 14 7x2 pole 243.8
2P18U3/16 16 8x2 pole 279.3
2P18U3/18 18 9x2 pole 314.8
2P18U3/20 20 10x2 pole 350.3
2P18U3/22 22 11x2 pole 385.8
2P18U3/24 24 12x2 pole 421.3
2P18U3/26 26 13x2 pole 456.8
2P18U3/28 28 14x2 pole 492.3
2P18U3/30 30 15x2 pole 527.8
2P18U3/32 32 16x2 pole 563.3
2P18U3/34 34 17x2 pole 598.8
2P18U3/36 36 18x2 pole 634.3
2P18U3/38 38 19x2 pole 669.8
2P18U3/40 40 20x2 pole 705.3
2P18U3/42 42 21x2 pole 740.8
2P18U3/44 44 22x2 pole 776.3
2P18U3/46 46 23x2 pole 811.8
2P18U3/48 48 24x2 pole 847.3
2P18U3/50 50 25x2 pole 882.8
2P18U3/52 52 26x2 pole 918.3
2P18U3/54 54 27x2 pole 953.8
2P18U3/56 56 28x2 pole 989.3
55 x 17.75 = 976 mm (38.43 in.)
991 mm (39.02 in.)
17.75 mm
(0.70 in.)
7 mm
(0.28 in.)
Insulation Track
Copper strips
End Cap
L2 L1
End Cap
L2L1
21 mm
(0.83 in.)
37 mm
(1.46 in.)
13 mm (.51 in.)
2 mm (.079 in.)
2 PHASE BUSBAR - standard spacing
18mm2for 80A / 25mm2for 100A
ACCESSORIES
25mm2for 100A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
2P25U3/4 4 2x2 pole 66.3
2P25U3/6 6 3x2 pole 101.8
2P25U3/8 8 4x2 pole 137.3
2P25U3/10 10 5x2 pole 172.8
2P25U3/12 12 6x2 pole 208.3
2P25U3/14 14 7x2 pole 243.8
2P25U3/16 16 8x2 pole 279.3
2P25U3/18 18 9x2 pole 314.8
2P25U3/20 20 10x2 pole 350.3
2P25U3/22 22 11x2 pole 385.8
2P25U3/24 24 12x2 pole 421.3
2P25U3/26 26 13x2 pole 456.8
2P25U3/28 28 14x2 pole 492.3
2P25U3/30 30 15x2 pole 527.8
2P25U3/32 32 16x2 pole 563.3
2P25U3/34 34 17x2 pole 598.8
2P25U3/36 36 18x2 pole 634.3
2P25U3/38 38 19x2 pole 669.8
2P25U3/40 40 20x2 pole 705.3
2P25U3/42 42 21x2 pole 740.8
2P25U3/44 44 22x2 pole 776.3
2P25U3/46 46 23x2 pole 811.8
2P25U3/48 48 24x2 pole 847.3
2P25U3/50 50 25x2 pole 882.8
2P25U3/52 52 26x2 pole 918.3
2P25U3/54 54 27x2 pole 953.8
2P25U3/56 56 28x2 pole 989.3
Type/Cat. No: P50UT P50UB BRS5 18/25CAP3P
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap End Cap
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 9
UL508 listed
E205412
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
2P18U3H/4 4 2x2 pole 75.3
2P18U3H/6 6 3x2 pole 119.8
2P18U3H/8 8 4x2 pole 164.3
2P18U3H/10 10 5x2 poles 208.8
2P18U3H/12 12 6x2 pole 253.3
2P18U3H/14 14 7x2 pole 297.8
2P18U3H/16 16 8x2 pole 342.3
2P18U3H/18 18 9x2 pole 386.8
2P18U3H/20 20 10x2 pole 431.3
2P18U3H/22 22 11x2 pole 475.8
2P18U3H/24 24 12x2 pole 520.3
2P18U3H/26 26 13x2 pole 564.8
2P18U3H/28 28 14x2 pole 609.3
2P18U3H/30 30 15x2 pole 653.8
2P18U3H/32 32 16x2 pole 698.3
2P18U3H/34 34 17x2 pole 742.8
2P18U3H/36 36 18x2 pole 787.3
2P18U3H/38 38 19x2 pole 831.8
2P18U3H/40 40 20x2 pole 876.3
2P18U3H/42 42 21x2 pole 920.8
2P18U3H/44 44 22x2 pole 965.3
2P18U3H/46 46 23x2 pole 1009.8
2P18U3H/48 48 24x2 pole 1054.3
2P18U3H/50 50 25x2 pole 1098.8
2P18U3H/52 52 26x2 pole 1143.3
2P18U3H/54 54 27x2 pole 1187.8
2P18U3H/56 56 28x1 pole 1232.3
7 mm
(0.28 in.)
17.8 mm (0.70 in.)
44.5 mm (1.75 in.)
22 x 44.5 = 979 mm (38.54 in.)
1009 mm (39.72 in.)
21 mm
(0.83 in.)
37 mm
(1.46 in.)
13 mm (.51 in.)
2 mm
(.079 in.)
2 PHASE BUSBAR - 1/2 pole spacing
18mm2for 80A / 25mm2for 100A
25mm2for 100A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
2P25U3H/4 4 2x2 pole 75.3
2P25U3H/6 6 3x2 pole 119.8
2P25U3H/8 8 4x2 pole 164.3
2P25U3H/10 10 5x2 pole 208.8
2P25U3H/12 12 6x2 pole 253.3
2P25U3H/14 14 7x2 pole 297.8
2P25U3H/16 16 8x2 pole 342.3
2P25U3H/18 18 9x2 pole 386.8
2P25U3H/20 20 10x2 pole 431.3
2P25U3H/22 22 11x2 pole 475.8
2P25U3H/24 24 12x2 pole 520.3
2P25U3H/26 26 13x2 pole 564.8
2P25U3H/28 28 14x2 pole 609.3
2P25U3H/30 30 15x2 pole 653.8
2P25U3H/32 32 16x2 pole 698.3
2P25U3H/34 34 17x2 pole 742.8
2P25U3H/36 36 18x2 pole 787.3
2P25U3H/38 38 19x2 pole 831.8
2P25U3H/40 40 20x2 pole 876.3
2P25U3H/42 42 21x2 pole 920.8
2P25U3H/44 44 22x2 pole 965.3
2P25U3H/46 46 23x2 pole 1009.8
2P25U3H/48 48 24x2 pole 1054.3
2P25U3H/50 50 25x2 pole 1098.8
2P25U3H/52 52 26x2 pole 1143.3
2P25U3H/54 54 27x2 pole 1187.8
2P25U3H/56 56 28x2 pole 1232.3
ACCESSORIES
Type/Cat. No: P50UT P50UB BRS5 18/25CAP3P
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap End Cap
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
10
UL508 listed
E205412
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
3P18U3/6 6 2x3 pole 101.8
3P18U3/9 9 3x3 pole 155.0
3P18U3/12 12 4x3 pole 208.3
3P18U3/15 15 5x3 pole 261.5
3P18U3/18 18 6x3 pole 314.8
3P18U3/21 21 7x3 pole 368.0
3P18U3/24 24 8x3 pole 421.3
3P18U3/27 27 9x3 pole 474.5
3P18U3/30 30 10x3 pole 527.8
3P18U3/33 33 11x3 pole 581.0
3P18U3/36 36 12x3 pole 634.3
3P18U3/39 39 13x3 pole 687.5
3P18U3/42 42 14x3 pole 740.8
3P18U3/45 45 15x3 pole 794.0
3P18U3/48 48 16x3 pole 847.3
3P18U3/51 51 17x3 pole 900.5
3P18U3/54 54 18x3 pole 953.8
3P18U3/57 57 19x3 pole 1007.0
56 x 17.75 = 994 mm (39.13 in.)
1009 mm (39.72 in.)
17.75 mm
(0.70 in.)
7 mm
(0.28 in.)
Insulation Track
Copper strips
End Cap
L3 L2 L1
End Cap
L3 L2 L1
21 mm
(0.83 in.)
37 mm
(1.46 in.)
13 mm (.51 in.)
2 mm (.079 in.)
3 PHASE BUSBAR - standard spacing
18mm2for 80A / 25mm2for 100A
ACCESSORIES
25mm2for 100A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
3P25U3/6 6 2x3 pole 101.8
3P25U3/9 9 3x3 pole 155.0
3P25U3/12 12 4x3 pole 208.3
3P25U3/15 15 5x3 pole 261.5
3P25U3/18 18 6x3 pole 314.8
3P25U3/21 21 7x3 pole 368.0
3P25U3/24 24 8x3 pole 421.3
3P25U3/27 27 9x3 pole 474.5
3P25U3/30 30 10x3 pole 527.8
3P25U3/33 33 11x3 pole 581.0
3P25U3/36 36 12x3 pole 634.3
3P25U3/39 39 13x3 pole 687.5
3P25U3/42 42 14x3 pole 740.8
3P25U3/45 45 15x3 pole 794.0
3P25U3/48 48 16x3 pole 847.3
3P25U3/51 51 17x3 pole 900.5
3P25U3/54 54 18x3 pole 953.8
3P25U3/57 57 19x3 pole 1007.0
Type/Cat. No: P50UT P50UB P95UB
Description: Power Feed Lug Modular Direct Power Feed Power Feed Block
Type/Cat. No: BRS5 18/25CAP3P
Description: Insulation Cap End Cap
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 11
UL508 listed
E205412
18mm2for 80A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
3P18U3H/6 6 2x3 pole 110.8
3P18U3H/9 9 3x3 pole 173.1
3P18U3H/12 12 4x3 pole 235.4
3P18U3H/15 15 5x3 pole 297.7
3P18U3H/18 18 6x3 pole 360.0
3P18U3H/21 21 7x3 pole 422.3
3P18U3H/24 24 8x3 pole 484.6
3P18U3H/27 27 9x3 pole 546.9
3P18U3H/30 30 10x3 pole 609.2
3P18U3H/33 33 11x3 pole 671.5
3P18U3H/36 36 12x3 pole 733.8
3P18U3H/39 39 13x3 pole 796.1
3P18U3H/42 42 14x3 pole 858.4
3P18U3H/45 45 15x3 pole 920.7
3P18U3H/48 48 16x3 pole 983.0
3P18U3H/51 51 17x3 pole 1045.3
3P18U3H/54 54 18x3 pole 1107.6
3P18U3H/57 57 19x3 pole 1169.9
7 mm
(0.28)
17.8 mm
(0.70 in.)
62.3 mm (2.45 in.)
15 x 62.3 = 934.5 mm
982 mm (38.66 in.)
21 mm
(0.83 in.)
37 mm
(1.46 in.)
13 mm (.51 in.)
2 mm
(.079 in.)
3 PHASE BUSBAR - 1/2 pole spacing
18mm2for 80A / 25mm2for 100A
ACCESSORIES
25mm2for 100A
Type/ No. of No. of MMC Length
Cat. No. Pins to Jumper [mm]
3P25U3H/6 6 2x3 pole 110.8
3P25U3H/9 9 3x3 pole 173.1
3P25U3H/12 12 4x3 pole 235.4
3P25U3H/15 15 5x3 pole 297.7
3P25U3H/18 18 6x3 pole 360.0
3P25U3H/21 21 7x3 pole 422.3
3P25U3H/24 24 8x3 pole 484.6
3P25U3H/27 27 9x3 pole 546.9
3P25U3H/30 30 10x3 pole 609.2
3P25U3H/33 33 11x3 pole 671.5
3P25U3H/36 36 12x3 pole 733.8
3P25U3H/39 39 13x3 pole 796.1
3P25U3H/42 42 14x3 pole 858.4
3P25U3H/45 45 15x3 pole 920.7
3P25U3H/48 48 16x3 pole 983.0
3P25U3H/51 51 17x3 pole 1045.3
3P25U3H/54 54 18x3 pole 1107.6
3P25U3H/57 57 19x3 pole 1169.9
Type/Cat. No: P50UT P50UB
Description: Power Feed Lug Modular Direct Power Feed
Type/Cat. No: BRS5 18/25CAP3P
Description: Insulation Cap End Cap
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
12
Assembly Instructions
Type/Cat. No. P50UT P50UB
Electrical Ratings 115A/480VAC 115A/480VAC
Terminal Site Acceptability 10-1/0 AWG (1.5-50mm2) 14-1 AWG (1.5-50mm2)
Recommended/
Required Torque 5.6Nm (50lb. in.) 4Nm (35.4 lb. in.)
Material of Lug/ Terminal Brass Brass
Insulation Material Polyamid Polyamid
For use with UL1077/508 18 and 25mm2UL1077/508 18 and 25mm2
1-3 phase busbars 1-3 phase busbars
Power Feed Lug Modular Direct
Power Feed
UL508 listed
E205412
UL508 listed
E205412
Power Feed Devices
Easy connection of power
supply wires to the
busbar/MCB. Power Feed
Devices ensure permanent
connection.
The power feed lugs (Cat. # P50UT) fit together with the lugs of
the busbar in the terminals of the MCB/MA.
6.8 mm (0.27 in.) 3 mm (0.12 in.)
16 mm
(0.63 in.)
11 mm
(0.43 in.)
59 mm (2.32 in.)
28.5 mm
(1.12 in.)
21 mm
(0.83 in.)
Dimensions
Altech UL508 Altech UL1077
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 13
135246
132213
Pin
Phase
Phase 1 Phase 2
Phase 3
Type/Cat. No. P95UB
Electrical Ratings 200A/ 480VAC
Terminal Site Acceptability 1-4/0 AWG (50-120mm2)
Recommended/ 19.5Nm (175lb. in.)
Required Torque
Material of Lug/ Terminal Brass
Insulation Material Polyamid
For use with UL1077/508 18 and 25mm2
3 phase busbars
(standard spacing only)
End Caps
Insulation Caps
Power Feed Block
UL508 listed
E205412
Type/Cat. No: 18/25CAP3P
For use with: 18/25mm22&3 phase Busbar
Type/Cat. No: BRS5 (5 per strip)
For use with: 18/25mm21-3 phase Busbar
Miscellaneous Accessories
A
A
B
B
43.5 mm
(1.71 in.)
35.6 mm
(1.40 in.)
35.6 mm
(1.40 in.)
31.6 mm
(1.24 in.)
31.6 mm
(1.24 in.)
DIN Rail Clip
88.5 mm
(3.48 in.)
63 mm
(2.48 in.)
63 mm
(2.48 in.)
NOTE: The Power Feed Block uses the space of 5 Pins
of the standard spacing Busbar (see drawing below).
Phase 1 connects to Pin 1, Phase 2 to Pin 3 and Phase
3 to Pin 5. Pin 2 and 4 are not in use. Pin 6 should be
covered with an insulation cap if phase sequence stays
the same. Therefore, the Power Feed Block covers 6 pins
to connect to the three phases.
Assembly Instructions
Dimensions
Altech UL489
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
14
UL489 Listed Busbars
The Altech Busbar System is an
innovative way to jumper power to
Miniature Molded Circuit Breakers.
The advantages of this busbar
system are:
•30% Installation time savings
•Panel space savings
•Reduced maintenance
•High electrical ratings
UL489 Busbar System
•Every pin configuration is possible by combination of existing 6, 12 and 18 pin busbars.
•Power Feeding:
Power Feed Lug (115A), Direct Power Feed (115A)
•UL listed for Altech’s L-Series of Miniature Circuit Breakers
•UL listed for use with most popular UL489 Miniature Molded Circuit Breakers in the
market.
Altech UL489
Busbar System
Technical Specifications Busbars UL489
Material of Busbar Copper
Material of Insulation (Housing) Polyamid
Electrical Ratings 115A/480VAC
Short Circuit Withstand Rating 10kA
Applying Standards UL489, VDE0660 Part 100,
IEC60749, DIN EN60947-1
UL489 recognized
E305318
Universal UL489 Busbar
fits most UL489 Miniature Circuit
Breakers in the market!
Please contact Altech for details and further information.
Altech UL489
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 15
Power Feed Methods
End Feed Method
P35ULT*
With the P35ULT Power Feed Lug as a Start/End Feeding Device a maximum input current of 115A per
Phase can be achieved.
P50ULB*
With the P50ULB Modular Direct Power Feed as a Start/End Feeding Device a maximum input current of
115A per Phase can be achieved.
*For complete specifications and description of Feeding Devices see page 19.
Altech UL489 Busbar System
115A 115A
115A
12
115A per phase
(P35ULT)
3
115A 115A 115A
12
115A per phase
3(P50ULB)
Altech UL489
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
16
UL489 recognized
E305318
15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
6 x 17.6 = 88 mm
(3.46 in.)
99 mm (3.90 in.)
Type/ No. of Length
Cat. No. Pins [mm]
1P16UL3/6 6 99
UL489 recognized
E305318
12 x 17.6 = 193.6 mm
(7.62 in.)
204.6 mm (8.06 in.) 15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
Type/ No. of Length
Cat. No. Pins [mm]
1P16UL3/12 12 204.6
UL489 recognized
E305318
18 x 17.6 = 299.2
(11.78 in.)
310.2 (12.21 in.)
15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
1P16UL3/18 1P16UL3/18
1P16UL3/12
Example for different No. of Pins
eg. 44 pins use 1x 1P16UL3/12 + 2x 1P16UL3/18
Busbars backwards
to one another
overlapping
• No. of overlapping pins of 2 busbars must be a multiplier of the No. of phases
• Overlapping busbars are backwards to each other
L3/18
L3/18
L3/18
UL3/18
Type/ No. of Length
Cat. No. Pins [mm]
1P16UL3/18 18 310.2
ACCESSORIES
Type/Cat. No: P35ULT P50ULB BRUL (3 per strip)
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap
1 PHASE BUSBAR
16mm2for 115A
UL489 recognized
E305318
15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
6 x 17.6 = 88 mm
(3.46 in.)
99 mm (3.90 in.)
2 PHASE BUSBAR
16mm2for 115A
Type/ No. of Length
Cat. No. Pins [mm]
2P16UL3/6 6 99
UL489 recognized
E305318
12 x 17.6 = 193.6 mm
(7.62 in.)
204.6 mm (8.06 in.) 15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
Type/ No. of Length
Cat. No. Pins [mm]
2P16UL3/12 12 204.6
UL489 recognized
E305318
18 x 17.6 = 299.2
(11.78 in.)
310.2 (12.21 in.)
15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
2P16UL3/12 2P16UL3/12
2P16UL3/12
Example for different No. of Pins
eg. 30 pins use 3x 2P16UL3/12
Busbars backwards
to one another
overlapping
• No. of overlapping pins of 2 busbars must be multiplier of the No. of phases
• Overlapping busbars are backwards to each other
Type/ No. of Length
Cat. No. Pins [mm]
2P16UL3/18 18 310.2
Altech UL489
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 17
ACCESSORIES
Type/Cat. No: P35ULT P50ULB BRUL (3 per strip)
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap
UL489 listed
E305318
15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
6 x 17.6 = 88 mm
(3.46 in.)
99 mm (3.90 in.)
3 PHASE BUSBAR
16mm2for 115A
Type/ No. of Length
Cat. No. Pins [mm]
3P16UL3/6 6 99
UL489 listed
E305318
12 x 17.6 = 193.6 mm
(7.62 in.)
204.6 mm (8.06 in.) 15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
Type/ No. of Length
Cat. No. Pins [mm]
3P16UL3/12 12 204.6
UL489 listed
E305318
18 x 17.6 = 299.2
(11.78 in.)
310.2 (12.21 in.)
15.5 mm
(0.61 in.)
35 mm
(1.38 in.)
13.5mm
(0.53 in.)
1.5 mm
(0.06 in.)
max. 1.5 mm
(0.06 in.)
5 mm (0.20 in.)
17.6 mm (0.69 in.)
3P16UL3/18 3P16UL3/18
3P16UL3/12
Example for different No. of Pins
eg. 39 pins use 1x 3P16UL3/12 + 2x 3P16UL3/18
Busbars backwards
to one another
overlapping
• No. of overlapping pins of 2 busbars must be multiplier of the No. of phases
• Overlapping busbars are backwards to each other
3
3
Type/ No. of Length
Cat. No. Pins [mm]
3P16UL3/18 18 310.2
Altech UL489
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
18
ACCESSORIES
Type/Cat. No: P35ULT P50ULB BRUL (3 per strip)
Description: Power Feed Lug Modular Direct Power Feed Insulation Cap
Altech UL489
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 19
Type/Cat. No. P35ULT P50ULB
Electrical Ratings 115A/480V AC 115A/480V AC
Conductors 75 C° 75 C°
Terminal Site Acceptability 14-2AWG(1.53mm2) 14-1AWG(1.5-50mm2)
Required Torque 4Nm (35.4 lb. in.) 3.5Nm/31 lb. in. (14-6AWG)
4Nm/35.4 lb. in. (4-1AWG)
Material of Lug Brass Brass
Insulation Material Polyamid Polyamid
For use with UL489 1-3 phase Busbar UL489 1-3 phase Busbar
Power Feed Lug Modular Direct Power Feed
Insulation Caps
UL489 listed
E305318
UL489 listed
E305318
Power Feed Devices
Easy connection of power supply
wires to the busbar/MCB. Power
Feed Devices ensure permanent
connection.
Assembly Instructions
Type/Cat. No: BRUL (3 per strip)
Description: Insulation Cap
Miscellaneous Accessories
31.3 mm (1.23 in.)16.2 mm (0.64 in.)
74.2 mm (2.92 in.)
16.1 mm
(0.63 in.)
48.5 mm (1.91 in.)
3 mm (0.12 in.)6 mm (0.24 in.)
51.36 mm (20.22 in.)
31.2 mm (0.00 in.)
17.75 mm
(0.70 in.)
17.6 mm
(0.69 in.)
4 mm
(0.16 in.)
12.4 mm
(0.49 in.)
12.6 mm
(0.50 in.)
6 mm
(0.24 in.)
Ø13.5 mm
(0.53 in.)
Altech UL489
Configuration and Assembly of UL489 Busbars
UL489 Busbars are available in 3 different Pin Configurations per Phase, (6, 12 and 18 Pins).
The UL489 busbar cannot be cut, since the creepage and clearance distance requirements from UL are too
stringent. Therefore, to obtain the desired No. of Pins, Busbar-Pins can be overlapped as explained below:
1) Busbars are overlapped backwards to each other. Both Pins of each Busbar fit together
in the terminals of the Minature Circuit Breaker.
2 The Number of overlapping Pins of 2 Busbar must be a multiplier of the Number of
Phases to keep existing Phase sequence. (Can be overlapped by more than the number
of phases).
3) Any available combination of the 3 different Pin configurations is possible.
4) In most cases there is more than 1 combination possible.
5) For more possible configurations see Busbar Selection Table on page 21.
Configuration Examples*
*For Questions, other configurations and detailed information please contact Altech Corp.
Altech Busbar Systems
3P16UL3/18 3P16UL3/18
3P16UL3/12
3P16UL3/18
3P16UL3/12
27 Pins: 1 x 3P16UL3/12 + 1 x 3P16UL3/18
39 Pins: 1 x 3P16UL3/12 + 2 x 3P16UL3/18
2P16UL3/18 2P16UL3/12
2P16UL3/12
2P16UL3/12
2P16UL3/12
22 Pins: 2 x 2P16UL3/12
36 Pins: 2 x 2P16UL3/12 + 1 x 2P16UL3/18
1P16UL3/18
1P16UL3/12
1P16UL3/6 1P16UL3/6
1P16UL3/6
16 Pins: 3 x 1P16UL3/6
29 Pins: 1 x 1P16UL3/12 + 1 x 1P16UL3/18
1 Phase
2 Phase
3 Phase
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
20
Altech UL489
1 Phase System
6 1x 1P16UL3/6
7 2x 1P16UL3/6
8 2x 1P16UL3/6
9 2x 1P16UL3/6
10 2x 1P16UL3/6
11 2x 1P16UL3/6
12 1x 1P16UL3/12
3x 1P16UL3/6
13 2x 1P16UL3/12
3x 1P16UL3/6
1x 1P16UL3/6 + 1x 1P16UL3/12
14 2x 1P16UL3/12
3x 1P16UL3/6
1x 1P16UL3/6 + 1x 1P16UL3/12
15 2x 1P16UL3/12
3x 1P16UL3/6
1x 1P16UL3/6 + 1x 1P16UL3/12
16 2x 1P16UL3/12
3x 1P16UL3/6
1x 1P16UL3/6 + 1x 1P16UL3/12
17 2x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12
18 1x 1P16UL3/18
2x 1P16UL3/12
2x 1P16UL3/6 + 1x 1P16UL3/12
1x 1P16UL3/6 + 2x 1P16UL3/12
19 2x 1P16UL3/12
2x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12
1x 1P16UL3/6 + 2x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
20 2x 1P16UL3/12
2x 1P16UL3/18
1x 1P16UL3/6 + 2x 1P16UL3/12
2x 1P16UL3/6 + 1x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
21 2x 1P16UL3/12
2x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12
1x 1P16UL3/6 + 2x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
22 2x 1P16UL3/12
2x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12
1x 1P16UL3/6 + 2x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
23 2x 1P16UL3/12
2x 1P16UL3/18
1x 1P16UL3/6 + 1x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
24 2x 1P16UL3/12
2x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18
3x 1P16UL3/12
25 2x 1P16UL3/12
2x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18
3x 1P16UL3/12
26 2x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18
3x 1P16UL3/12
27 2x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18
3x 1P16UL3/12
28 2x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18
3x 1P16UL3/12
29 2x 1P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18
3x 1P16UL3/12
30 2x 1P16UL3/18
3x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12
+ 1x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
31 2x 1P16UL3/18
3x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12
+ 1x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
32 2x 1P16UL3/18
3x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12
+ 1x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
33 2x 1P16UL3/18
3x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12
+ 1x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
34 2x 1P16UL3/18
3x 1P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12
+ 1x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
35 2x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
36 1x 1P16UL3/6 + 2x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
3x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
37 1x 1P16UL3/6 + 2x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
3x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
38 1x 1P16UL3/6 + 2x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
3x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
39 1x 1P16UL3/6 + 2x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
3x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
40 1x 1P16UL3/6 + 2x 1P16UL3/18
2x 1P16UL3/12 + 1x 1P16UL3/18
1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
41 1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
42 1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
43 1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
44 1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
45 1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
46 1x 1P16UL3/12 + 2x 1P16UL3/18
3x 1P16UL3/18
47 3x 1P16UL3/18
48 3x 1P16UL3/18
49 3x 1P16UL3/18
50 3x 1P16UL3/18
51 3x 1P16UL3/18
52 3x 1P16UL3/18
2 Phase System
6 1x 2P16UL3/6
8 2x 2P16UL3/6
10 2x 2P16UL3/6
12 3x 2P16UL3/6
1x 2P16UL3/12
14 3x 2P16UL3/6
2x 2P16UL3/12
1x 2P16UL3/6 + 1x 2P16UL3/12
16 2x 2P16UL3/12
1x 2P16UL3/6 + 1x 2P16UL3/12
18 1x 2P16UL3/18
2x 2P16UL3/12
2x 2P16UL3/6 + 1x 2P16UL3/12
20 2x 2P16UL3/6 + 1x 2P16UL3/12
1x 2P16UL3/6 + 1x 2P16UL3/18
2x 2P16UL3/12
2x 2P16UL3/18
1x 2P16UL3/12 + 1x 2P16UL3/18
22 2x 2P16UL3/12
2x 2P16UL3/18
1x 2P16UL3/6 + 1x 2P16UL3/18
1x 2P16UL3/12 + 1x 2P16UL3/18
24 2x 2P16UL3/6 + 1x 2P16UL3/18
1x 2P16UL3/6 + 2x 2P16UL3/12
3x 2P16UL3/12
2x 2P16UL3/18
1x 2P16UL3/12 + 1x 2P16UL3/18
26 2x 2P16UL3/6 + 1x 2P16UL3/18
1x 2P16UL3/6 + 2x 2P16UL3/12
3x 2P16UL3/12
2x 2P16UL3/18
1x 2P16UL3/12 + 1x 2P16UL3/18
28 3x 2P16UL3/12
2x 2P16UL3/18
1x 2P16UL3/12 + 1x 2P16UL3/18
30 1x 2P16UL3/6 + 1x 2P16UL3/12
+ 1x 2P16UL3/18
3x 2P16UL3/12
2x 2P16UL3/12 + 1x 2P16UL3/18
2x 2P16UL3/18
32 1x 2P16UL3/6 + 1x 2P16UL3/12
+ 1x 2P16UL3/18
3x 2P16UL3/12
2x 2P16UL3/12 + 1x 2P16UL3/18
2x 2P16UL3/18
34 1x 2P16UL3/6 + 1x 2P16UL3/12
+ 1x 2P16UL3/18
2x 2P16UL3/12 + 1x 2P16UL3/18
2x 2P16UL3/18
36 1x 2P16UL3/6 + 2x 2P16UL3/18
3x 2P16UL3/18
2x 2P16UL3/12 + 1x 2P16UL3/18
1x 2P16UL3/12 + 2x 2P16UL3/18
38 1x 2P16UL3/6 + 2x 2P16UL3/18
3x 2P16UL3/18
2x 2P16UL3/12 + 1x 2P16UL3/18
1x 2P16UL3/12 + 2x 2P16UL3/18
40 3x 2P16UL3/18
1x 2P16UL3/12 + 2x 2P16UL3/18
42 3x 2P16UL3/18
1x 2P16UL3/12 + 2x 2P16UL3/18
44 3x 2P16UL3/18
1x 2P16UL3/12 + 2x 2P16UL3/18
46 3x 2P16UL3/18
48 3x 2P16UL3/18
50 3x 2P16UL3/18
3 Phase System
9 2x 3P16UL3/6
12 1x 3P16UL3/12
3x 3P16UL3/6
15 1x 3P16UL3/6 + 1x 3P16UL3/12
2x 3P16UL3/12
18 1x 3P16UL3/18
1x 3P16UL3/12 + 2x 3P16UL3/6
2x 3P16UL3/12
21 2x 3P16UL3/12
1x 3P16UL3/6 + 1x 3P16UL3/18
1x 3P16UL3/12 + 1x 3P16UL3/18
2x 3P16UL3/18
24 1x 3P16UL3/12 + 1x 3P16UL3/18
2x 3P16UL3/6 + 1x 3P16UL3/18
1x 3P16UL3/6 + 2x 3P16UL3/12
3x 3P16UL3/12
2x 3P16UL3/18
27 1x 3P16UL3/12 + 1x 3P16UL3/18
2x 3P16UL3/18
3x 3P16UL3/12
30 2x 3P16UL3/18
2x 3P16UL3/12 + 1x 3P16UL3/18
3x 3P16UL3/12
1x 3P16UL3/6 + 1x 3P16UL3/12
+ 1x 3P16UL3/18
33 2x 3P16UL3/18
2x 3P16UL3/12 + 1x 3P16UL3/18
36 1x 3P16UL3/6 + 2x 3P16UL3/18
2x 3P16UL3/12 + 1x 3P16UL3/18
1x 3P16UL3/12 + 2x 3P16UL3/18
3x 3P16UL3/18
39 1x 3P16UL3/12 + 2x 3P16UL3/18
3x 3P16UL3/18
42 1x 3P16UL3/12 + 2x 3P16UL3/18
3x 3P16UL3/18
45 3x 3P16UL3/18
48 3x 3P16UL3/18
Note: For detailed information and
examples see page 20.
No. of Necessary
Pins Busbars
No. of Necessary
Pins Busbars
No. of Necessary
Pins Busbars
No. of Necessary
Pins Busbars
Busbar Selection Table
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 21
Modular APDSystem
Modular APD System
Altech’s modular Power Distribution (APD) System is a new way to
simplify existing wiring methods!
The modular APD system provides flexible solutions for busing
common power to many different electrical components. Components
can be easily added or removed using quick disconnects saving
valuable time and cost during installation and maintenance. The APD
system also provides an organized method of wiring, that would
simplify the wiring schematics for troubleshooting, while reducing the
use of excessive wires and cables.
The APD system allows multiple connections per phase for many
applications, such as:
• Supplying separate voltages to auxiliary circuits and control
circuits for relays, contactors, timers, etc.
• Supplying power to circuit breakers, motor starters, switches,
contactors, etc.
Two conductors are housed within a rigid plastic insulation housing
suitable for voltages up to 600VAC. The conductors have current ratings
of 25A, 63A or 80A.
The entire system is touch proof (IP20).
UL1059 listed
E98082
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
22
4.6 mm4.6 mm
13 mm
30 mm
Modular APDSystem
Electrical Rating Part No. Possible No. of Material Length
(600VAC) Connections / Phase Phases
25A 1LB158-25A 158 1 Brass 1.9m (6.23 ft.)
25A 2LB158-25A 158 2 Brass 1.9m (6.23 ft.)
25A 1LB83-25A 83 1 Brass 1.0m (3.281 ft.)
25A 2LB83-25A 83 2 Brass 1.0m (3.281 ft.)
63A 1TC158-63A 158 1 Tinned Copper 1.9m (6.23 ft.)
63A 2TC158-63A 158 2 Tinned Copper 1.9m (6.23 ft.)
63A 1TC83-63A 83 1 Tinned Copper 1.0m (3.281 ft.)
63A 2TC83-63A 83 2 Tinned Copper 1.0m (3.281 ft.)
80A 1TC158-80A 158 1 Tinned Copper 1.9m (6.23 ft.)
80A 2TC158-80A 158 2 Tinned Copper 1.9m (6.23 ft.)
80A 1TC83-80A 83 1 Tinned Copper 1.0m (3.281 ft.)
80A 2TC83-80A 83 2 Tinned Copper 1.0m (3.281 ft.)
Technical Note:
The standard busbar lengths can be cut to any desirable length. When cutting the busbars
remember to cut the conductor 62mm shorter than the insulation to ensure space for the
insulation cap (Part No. 17BI0) at each end. This guarantees adequate and required
creepage distance (see picture below). If an end support (Part No. 17BS) is used then no
insulation cap is needed.
insulation cap
31 mm
insulation cap
End Support (17BS)
APD Busbar
Power Input Connector (40017)
Bar Holder (19FT3V)
APD BUSBARS
Specifications:
APD Busbars are available
with 1 or 2 phases,
Max. Temperature 158°F (70°C)
Material Insulation:
PVC
Length:
1.9m (6.23 ft.)/ 1.0m (3.281 ft.)
31 mm
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 23
83 Connections
per Meter per Phase
Modular APDSystem
Holders should be set approx. every
500mm (19.69 in.). For each
Busbar to be fixed cut 2 braces out
of the holder, keep the others to
assure stability
The bar-holder has engraved
numerical identification from 1-12.
The bar-holder can also
accomodate 42x25 mm (1.65 x
0.98 in.) labels and a transparent
protection cover. This marking-set
is available as part no. 17EET; it
contains one label with 6 positions
for marking and one transparent
cover in PVC.
The holder can accommodate up to
3 Busbars (6 conductor circuits)
60
14.5 14.5
1.5
9mm
+0.1
- 0.3
30mm
+0.3
- 0.6
Ø8.2mm
+0.2
0
Part No. 19FT3V
Material Noryl
including 2 Screws
M4x30mm
built-in
insulation cap
If an end support is used, no
insulation cap (Part No. 17BIO)
is necessary
Part No. 17BS
Material Noryl
including Screw M4x25
Slide in insulation cap from the
side into insulation.
Part No. 17BI0
Material PVC
Length 30 mm
Part No. 17EET
Material cover -PVC
label - Paper
insulation cap
Bar-Holder End SupportInsulation Cap
Busbar Holder Marking Set
FIXING AND MOUNTING
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
24
Modular APDSystem
90A
45A
45A
29.5
50
15
15
19.5
The Power Input Connector is optional. It
can accommodate wires from 8 to 2AWG
and is used for circuits up to 90A.
90A can be distributed over a 63A APD
Busbar by using the Power Input Connector
as a feeder in the center of the busbar.
Note:
Standard Female Quick Disconnects (0.250 x 0.032 in.) can
be used for power feeding and between-busbar connections
of up to 30A. Power Input Connectors (Part No. 40017) are
only necessary for currents greater than 30A.
Power Input Connector
Part No. 40017
Material Clamp Copper/Steel
Wire Size 8-2AWG (10-25mm2)
Electrical Rating 90A (600V AC/DC)
Connection of
Branch Circuits
The APD Busbar have standard pins (6.3mm x 0.8mm) for
female disconnects every 12mm. 83 disconnects are
available per meter.
Standard 0.250 in. female disconnects can be used for
connections to achieve the following current ratings:
30A with 10AWG wire
20A with 12AWG wire
15A with 14AWG wire
10A with 16AWG wire
POWERFEEDINGANDCONNECTION
19.8 mm
8 mm
6.3 mm 12 mm
5.7 mm
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 25
UL1059
3804138049
ONE PHASE POWER
DISTRIBUTION BLOCKS
• Quick mounting and wiring
• IP20 Finger Safe
• DIN Rail or Panel Mount
• Blocks fit with other DIN Rail
mountable modular devices
(height 95mm, depth 44.5mm)
• Accessories increase the
number of outputs with only
one input (applies only to 38041
and 38032)
• No caps to open or remove
• Material
Housing: Polyamide
Metal Body: Brass
Fork Type Busbar
38045
38041
Accessories:
Fork Type Busbar
Part No:
38045 to jump 2 Blocks
38046 to jump 8 Blocks
can be cut
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
26
Part Number:
White 38049 (UL File E98082) 38041 (UL File E98082)
Gray DB16 (UL File E220514) DB35 (UL File E220514)
Approvals
Current Rating 80A 80A 115A 125A
Voltage Rating 600V AC 690V AC 600V AC 690V AC
No. of Inputs 1 1 1 1
Wire Range 8-4 AWG 6-16mm2 8-2 AWG 10-35mm2
Torque 13.5lb.-in. 1.5Nm 31lb.-in. 40lb.-in. 3.5Nm
for DB35
Screw Type Pozi Drive 2 Pozi Drive 2
No. of Outputs 6 6 6 6
Wire Range (2x)8-4 AWG (2x)6-16mm2 14-6 AWG 2.5-16mm2
Torque 13.5lb.-in. 1.5Nm 17.5lb.-in. 2Nm
Wire Range (4x)14-10 AWG (4x)2.5-6mm2
Torque 7.2lb.-in. 0.8Nm
Screw Type Pozi Drive 2 Pozi Drive 2
Optional
Marking Tag MT2* MT2*
*(for DB16 and DB35)
Dimensions:
SCCR: 100kA SCCR: 100kA
38041
UL1059
38032
38032
160A 160A
600V AC 690V AC
1 1
8-2/0AWG 10-70mm2
35.5lb.-in. 4Nm
Hex 5
6 6
14-6 AWG 2.5-16mm2
17.5lb.-in. 2Nm
Hex 3
38076
Part Number:
Approvals
Current Rating
Voltage Rating
No. of Inputs
Wire Range
Torque
Screw Type
No. of Outputs
Wire Range
Torque
Screw Type
Dimensions:
38076
115A 125A
600V AC 690V AC
1 1
8-2 AWG 10-35mm2
53lb.-in. 6Nm
Hex 4
10 10
14-4 AWG 2.5-16mm2
26.5lb.-in. 3Nm
Hex 3
38074
38074
175A 175A
600V AC 690V AC
1 1
6-2/0AWG 16-70mm2
53lb.-in. 6Nm
Hex 5
10 10
14-4 AWG 2.5-16mm2
26.5lb.-in. 3Nm
Hex 3
Copper Jumper Bar
3803221
38032
71 mm
(2.80 in)
17.4 mm
(0.69 in)
17.4 mm
(0.69 in) 17.4 mm
(0.69 in)
17.4 mm
(0.69 in)
71 mm
(2.80 in)
17.4 mm
(0.69 in)
17.4 mm
(0.69 in) 17.4 mm
(0.69 in)
17.4 mm
(0.69 in)
UL File E98082 UL File E98082 UL File E98082
Accessories:
Copper Jumper Bar
(6x15 mm)
Part No:
3803221 for 2 Blocks
3803231 for 3 Blocks
3803241 for 4 Blocks
can be cut
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 27
SCCR: 100kA SCCR: 100kA SCCR: 100kA
38032
UL1059
38020 38019
Part Number:
Approvals
Current Rating
Voltage Rating
No. of Inputs
Wire Range
Torque
Screw Type
No. of Outputs
Wire Range
Torque
Wire Range
Torque
Wire Range
Torque
Screw Type
Dimensions:
38020 38019
230A 250A 310A 400A
600V AC 690V AC 600V AC 690V AC
1 1 1 1
2-4/0AWG 35-120mm23/0-350kcmil 95-185mm2
170lb.-in. 19Nm 230lb.-in. 25Nm
Hex 6 Hex 8
11 11 11 11
(2x) 14-2AWG (2x) 2.5-35mm2(2x) 14-2AWG (2x) 2.5-35mm2
31lb.-in. 3.5Nm 31lb.-in. 3.5Nm
(5x) 14-6AWG (5x) 2.5-16mm2(5x) 14-6AWG (5x) 2.5-16mm2
17.5lb.-in. 2Nm 17.5lb.-in. 2Nm
(4x) 14-8AWG (4x) 2.5-10mm2(4x) 14-8AWG (4x) 2.5-10mm2
17.5lb.-in. 2Nm 17.5lb.-in. 2Nm
standard screwdriver standard screwdriver
UL File E98082 UL File E98082
ONE PHASE POWER
DISTRIBUTION BLOCKS
• Quick mounting and wiring
• IP20 Finger Safe
• DIN Rail or Panel Mount
• Blocks fit with other DIN Rail
mountable modular devices
(height 95mm, depth 44.5mm)
• Accessories increase the
number of outputs with only
one input.
• No caps to open or remove
• Material
Housing: Polyamide
Metal Body: Brass
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
28
SCCR: 100kA SCCR: 100kA
UL1059
38075 38073
Part Number:
Approvals
Current Rating
Voltage Rating
No. of Inputs
Wire Range
Torque
Screw Type
No. of Outputs
Wire Range
Torque
Screw Type
Dimensions:
38075 38073
115A 115A 175A 175A
600V AC 690V AC 600V AC 690V AC
3x1 3x1 3x1 3x1
8-2AWG 10-35mm2 8-2/0AWG 10-70mm2
31lb.-in. 3.5Nm 35.5lb.-in. 4Nm
Hex 4 Hex 5
3x6 3x6 3x6 3x6
14-4AWG 2.5-16mm2 14-4AWG 2.5-16mm2
17.5lb.-in. 2Nm 17.5 lb.-in. 2Nm
Hex 3 Hex 3
3 Pole 3 Pole
THREE PHASE POWER
DISTRIBUTION BLOCKS
• Quick mounting and wiring
• IP20 Finger Safe
• DIN Rail or Panel Mount
• Blocks fit with other DIN Rail
mountable modular devices
• Same compact size for
both ratings
• No caps to open or remove
• Material
Housing: Polyamide
Metal Body: Brass
UL File E98082 UL File E98082
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 29
SCCR: 100kA SCCR: 100kA
SPLICER TERMINAL
BLOCKS
• Quick mounting
and wiring
• IP20 Finger Safe
•DIN Rail or Panel Mount
• No caps to open or remove
• Material
Housing: Polyamide
Metal Body: Aluminum
UL1059
38064 38057
Part Number:: 38064 38057 38059
59.6 mm (2.35 in)
25.4 mm
(1.0 in)
50 mm
(1.97 in)
72.3 mm (2.85 in)
34.7 mm
(1.37 in)
43.2 mm (1.70 in)
39 mm
[1.54 in]
7 mm
[0.28 in]
145.5 mm
[5.73 in]
7.5 mm
[0.30 in]
124.4 mm
[4.90 in]
12 mm
[0.47 in]
7 mm
[0.28 in]
80.5 mm
[3.17 in]
53.5 mm
[2.11 in]
145 mm
[5.71 in]
129 mm
[5.08 in]
72 mm
[2.83 in]
80.5 mm
[3.17 in]
38059
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
30
UL File E98082 UL File E98082 UL File E98082
Current Rating 175A 175A 400A 400A 800A 800a
Voltage Rating 600V AC 690V AC 600V AC 690V AC 600V AC 690V AC
No. of Inputs 111 122
Total Wire Range 14-2/0 AWG 2.5mm²-70mm² 6 AWG-400kcmil 16mm²-185mm² 4 AWG-600kcmil 25mm²-300mm²
Screw Type Hex 5 Hex 10 Hex 10
No. of Outputs 11 1 1 2 2
Total Wire Range 14-2/0 AWG 2.5mm²-70mm² 6 AWG-400kcmil 16mm²-185mm² 4 AWG-600kcmil 25mm²-300mm²
Screw Type Hex 5 Hex 10 Hex 10
Torque
Wire Range 14-8 AWG 2.5mm²-10mm² 6-3 AWG 16mm²-25mm² 4-3 AWG 2 5mm²
Torque 35 lb-in 3.9 Nm 130 lb-in 14.7 Nm 130 lb-in 14.7 Nm
Wire Range 6-2 AWG 16mm²-35mm² 2-1/0 AWG 35mm²-50mm² 2-1/0 AWG 35mm²-50mm²
Torque 80 lb-in 9.0 Nm 170 lb-in 19.2 Nm 170 lb-in 19.2 Nm
Wire Range 1-2/0 AWG 50mm²-70mm² 2/0 AWG-400kcmil 70mm²-185mm² 2/0 AWG-400kcmil 70mm²-185mm²
Torque 100 lb-in 11.4 Nm 220 lb-in 24.9 Nm 220 lb-in 24.9 Nm
Wire Range -- --500-600kcmil 300mm²-240mm²
Torque -- --310 lb-in 35.1 Nm
38019 . . . . . . . . . . . . . . . .28
38020 . . . . . . . . . . . . . . . .28
38032 . . . . . . . . . . . . . . . .27
38057 . . . . . . . . . . . . . . . .30
38059 . . . . . . . . . . . . . . . .30
38064 . . . . . . . . . . . . . . . .30
38073 . . . . . . . . . . . . . . . .29
38074 . . . . . . . . . . . . . . . .27
38075 . . . . . . . . . . . . . . . .29
17BIO . . . . . . . . . . . . . . . .24
17BS . . . . . . . . . . . . . . . .24
17EET . . . . . . . . . . . . . . .24
18/25CAP3P . . . . . . . . . .13
19FT3V . . . . . . . . . . . . . .24
1LB41-25A . . . . . . . . . . . .23
1LB83-25A . . . . . . . . . . . .23
1P16UL3/12 . . . . . . . . . . .16
1P16UL3/18 . . . . . . . . . . .16
1P16UL3/6 . . . . . . . . . . . .16
1P18U1/10 . . . . . . . . . . . . .6
1P18U1/11 . . . . . . . . . . . . .6
1P18U1/12 . . . . . . . . . . . . .6
1P18U1/13 . . . . . . . . . . . . .6
1P18U1/14 . . . . . . . . . . . . .6
1P18U1/15 . . . . . . . . . . . . .6
1P18U1/16 . . . . . . . . . . . . .6
1P18U1/17 . . . . . . . . . . . . .6
1P18U1/18 . . . . . . . . . . . . .6
1P18U1/19 . . . . . . . . . . . . .6
_1P18U1/2 . . . . . . . . . . . . .6
1P18U1/20 . . . . . . . . . . . . .6
1P18U1/21 . . . . . . . . . . . . .6
1P18U1/22 . . . . . . . . . . . . .6
1P18U1/23 . . . . . . . . . . . . .6
1P18U1/24 . . . . . . . . . . . . .6
1P18U1/25 . . . . . . . . . . . . .6
1P18U1/26 . . . . . . . . . . . . .6
1P18U1/27 . . . . . . . . . . . . .6
1P18U1/28 . . . . . . . . . . . . .6
1P18U1/29 . . . . . . . . . . . . .6
1P18U1/3 . . . . . . . . . . . . . .6
1P18U1/30 . . . . . . . . . . . . .6
1P18U1/31 . . . . . . . . . . . . .6
1P18U1/32 . . . . . . . . . . . . .6
1P18U1/33 . . . . . . . . . . . . .6
1P18U1/34 . . . . . . . . . . . . .6
1P18U1/35 . . . . . . . . . . . . .6
1P18U1/36 . . . . . . . . . . . . .6
1P18U1/37 . . . . . . . . . . . . .6
1P18U1/38 . . . . . . . . . . . . .6
1P18U1/39 . . . . . . . . . . . . .6
1P18U1/4 . . . . . . . . . . . . . .6
1P18U1/40 . . . . . . . . . . . . .6
1P18U1/41 . . . . . . . . . . . . .6
1P18U1/42 . . . . . . . . . . . . .6
1P18U1/43 . . . . . . . . . . . . .6
1P18U1/44 . . . . . . . . . . . . .6
1P18U1/45 . . . . . . . . . . . . .6
1P18U1/46 . . . . . . . . . . . . .6
1P18U1/47 . . . . . . . . . . . . .6
1P18U1/48 . . . . . . . . . . . . .6
1P18U1/49 . . . . . . . . . . . . .6
1P18U1/5 . . . . . . . . . . . . . .6
1P18U1/50 . . . . . . . . . . . . .6
1P18U1/51 . . . . . . . . . . . . .6
1P18U1/52 . . . . . . . . . . . . .6
1P18U1/53 . . . . . . . . . . . . .6
1P18U1/54 . . . . . . . . . . . . .6
1P18U1/55 . . . . . . . . . . . . .6
1P18U1/56 . . . . . . . . . . . . .6
1P18U1/57 . . . . . . . . . . . . .6
1P18U1/6 . . . . . . . . . . . . . .6
1P18U1/7 . . . . . . . . . . . . . .6
1P18U1/8 . . . . . . . . . . . . . .6
1P18U1/9 . . . . . . . . . . . . . .6
1P18U1H/10 . . . . . . . . . . .7
1P18U1H/11 . . . . . . . . . . .7
1P18U1H/12 . . . . . . . . . . .7
1P18U1H/13 . . . . . . . . . . .7
1P18U1H/14 . . . . . . . . . . .7
1P18U1H/15 . . . . . . . . . . .7
1P18U1H/16 . . . . . . . . . . .7
1P18U1H/17 . . . . . . . . . . .7
1P18U1H/18 . . . . . . . . . . .7
1P18U1H/19 . . . . . . . . . . .7
1P18U1H/2 . . . . . . . . . . . .7
1P18U1H/20 . . . . . . . . . . .7
1P18U1H/21 . . . . . . . . . . .7
1P18U1H/22 . . . . . . . . . . .7
1P18U1H/23 . . . . . . . . . . .7
1P18U1H/24 . . . . . . . . . . .7
1P18U1H/25 . . . . . . . . . . .7
1P18U1H/26 . . . . . . . . . . .7
1P18U1H/27 . . . . . . . . . . .7
1P18U1H/28 . . . . . . . . . . .7
1P18U1H/29 . . . . . . . . . . .7
1P18U1H/3 . . . . . . . . . . . .7
1P18U1H/30 . . . . . . . . . . .7
1P18U1H/31 . . . . . . . . . . .7
1P18U1H/32 . . . . . . . . . . .7
1P18U1H/33 . . . . . . . . . . .7
1P18U1H/34 . . . . . . . . . . .7
1P18U1H/35 . . . . . . . . . . .7
1P18U1H/36 . . . . . . . . . . .7
1P18U1H/4 . . . . . . . . . . . .7
1P18U1H/5 . . . . . . . . . . . .7
1P18U1H/6 . . . . . . . . . . . .7
1P18U1H/7 . . . . . . . . . . . .7
1P18U1H/8 . . . . . . . . . . . .7
1P18U1H/9 . . . . . . . . . . . .7
1TC41-100A . . . . . . . . . . .23
1TC41-63A . . . . . . . . . . . .23
1TC83-100A . . . . . . . . . . .23
1TC83-63A . . . . . . . . . . . .23
2LB41-25A . . . . . . . . . . . .23
2LB83-25A . . . . . . . . . . . .23
2P16UL3/12 . . . . . . . . . . .17
2P16UL3/18 . . . . . . . . . . .17
2P16UL3/6 . . . . . . . . . . . .17
2P18U3/10 . . . . . . . . . . . . .8
2P18U3/12 . . . . . . . . . . . . .8
2P18U3/14 . . . . . . . . . . . . .8
2P18U3/16 . . . . . . . . . . . . .8
2P18U3/18 . . . . . . . . . . . . .8
2P18U3/20 . . . . . . . . . . . . .8
2P18U3/22 . . . . . . . . . . . . .8
2P18U3/24 . . . . . . . . . . . . .8
2P18U3/26 . . . . . . . . . . . . .8
2P18U3/28 . . . . . . . . . . . . .8
2P18U3/30 . . . . . . . . . . . . .8
2P18U3/32 . . . . . . . . . . . . .8
2P18U3/34 . . . . . . . . . . . . .8
2P18U3/36 . . . . . . . . . . . . .8
2P18U3/38 . . . . . . . . . . . . .8
2P18U3/4 . . . . . . . . . . . . . .8
2P18U3/40 . . . . . . . . . . . . .8
2P18U3/42 . . . . . . . . . . . . .8
2P18U3/44 . . . . . . . . . . . . .8
2P18U3/46 . . . . . . . . . . . . .8
2P18U3/48 . . . . . . . . . . . . .8
2P18U3/50 . . . . . . . . . . . . .8
2P18U3/52 . . . . . . . . . . . . .8
2P18U3/54 . . . . . . . . . . . . .8
2P18U3/56 . . . . . . . . . . . . .8
2P18U3/6 . . . . . . . . . . . . . .8
2P18U3/8 . . . . . . . . . . . . . .8
2P18U3H/10 . . . . . . . . . . .9
2P18U3H/12 . . . . . . . . . . .9
2P18U3H/14 . . . . . . . . . . .9
2P18U3H/16 . . . . . . . . . . .9
2P18U3H/18 . . . . . . . . . . .9
2P18U3H/20 . . . . . . . . . . .9
2P18U3H/22 . . . . . . . . . . .9
2P18U3H/24 . . . . . . . . . . .9
2P18U3H/26 . . . . . . . . . . .9
2P18U3H/28 . . . . . . . . . . .9
2P18U3H/30 . . . . . . . . . . .9
2P18U3H/32 . . . . . . . . . . .9
2P18U3H/34 . . . . . . . . . . .9
2P18U3H/36 . . . . . . . . . . .9
2P18U3H/38 . . . . . . . . . . .9
2P18U3H/4 . . . . . . . . . . . .9
2P18U3H/40 . . . . . . . . . . .9
2P18U3H/42 . . . . . . . . . . .9
2P18U3H/44 . . . . . . . . . . .9
2P18U3H/46 . . . . . . . . . . .9
2P18U3H/48 . . . . . . . . . . .9
2P18U3H/50 . . . . . . . . . . .9
2P18U3H/52 . . . . . . . . . . .9
2P18U3H/54 . . . . . . . . . . .9
2P18U3H/56 . . . . . . . . . . .9
2P18U3H/6 . . . . . . . . . . . .9
2P18U3H/8 . . . . . . . . . . . .9
2P25U3/10 . . . . . . . . . . . . .8
2P25U3/12 . . . . . . . . . . . . .8
2P25U3/14 . . . . . . . . . . . . .8
2P25U3/16 . . . . . . . . . . . . .8
2P25U3/18 . . . . . . . . . . . . .8
2P25U3/20 . . . . . . . . . . . . .8
2P25U3/22 . . . . . . . . . . . . .8
2P25U3/24 . . . . . . . . . . . . .8
2P25U3/26 . . . . . . . . . . . . .8
2P25U3/28 . . . . . . . . . . . . .8
2P25U3/30 . . . . . . . . . . . . .8
2P25U3/32 . . . . . . . . . . . . .8
2P25U3/34 . . . . . . . . . . . . .8
2P25U3/36 . . . . . . . . . . . . .8
2P25U3/38 . . . . . . . . . . . . .8
2P25U3/4 . . . . . . . . . . . . . .8
2P25U3/40 . . . . . . . . . . . . .8
2P25U3/42 . . . . . . . . . . . . .8
2P25U3/44 . . . . . . . . . . . . .8
2P25U3/46 . . . . . . . . . . . . .8
2P25U3/48 . . . . . . . . . . . . .8
2P25U3/50 . . . . . . . . . . . . .8
2P25U3/52 . . . . . . . . . . . . .8
2P25U3/54 . . . . . . . . . . . . .8
2P25U3/56 . . . . . . . . . . . . .8
2P25U3/6 . . . . . . . . . . . . . .8
2P25U3/8 . . . . . . . . . . . . . .8
2P25U3H/10 . . . . . . . . . . .9
2P25U3H/12 . . . . . . . . . . .9
2P25U3H/14 . . . . . . . . . . .9
2P25U3H/16 . . . . . . . . . . .9
2P25U3H/18 . . . . . . . . . . .9
2P25U3H/20 . . . . . . . . . . .9
2P25U3H/22 . . . . . . . . . . .9
2P25U3H/24 . . . . . . . . . . .9
2P25U3H/26 . . . . . . . . . . .9
2P25U3H/28 . . . . . . . . . . .9
2P25U3H/30 . . . . . . . . . . .9
2P25U3H/32 . . . . . . . . . . .9
2P25U3H/34 . . . . . . . . . . .9
2P25U3H/36 . . . . . . . . . . .9
2P25U3H/38 . . . . . . . . . . .9
2P25U3H/4 . . . . . . . . . . . .9
2P25U3H/40 . . . . . . . . . . .9
2P25U3H/42 . . . . . . . . . . .9
2P25U3H/44 . . . . . . . . . . .9
2P25U3H/46 . . . . . . . . . . .9
2P25U3H/48 . . . . . . . . . . .9
2P25U3H/50 . . . . . . . . . . .9
2P25U3H/52 . . . . . . . . . . .9
2P25U3H/54 . . . . . . . . . . .9
2P25U3H/56 . . . . . . . . . . .9
2P25U3H/6 . . . . . . . . . . . .9
2P25U3H/8 . . . . . . . . . . . .9
2TC41-100A . . . . . . . . . . .23
2TC41-63A . . . . . . . . . . . .23
2TC83-100A . . . . . . . . . . .23
2TC83-63A . . . . . . . . . . . .23
38041 . . . . . . . . . . . . . . . .26
38049 . . . . . . . . . . . . . . . .26
38076 . . . . . . . . . . . . . . . .27
3P16UL3/12 . . . . . . . . . . .18
3P16UL3/18 . . . . . . . . . . .18
3P16UL3/6 . . . . . . . . . . . .18
3P18U3/12 . . . . . . . . . . . .10
3P18U3/15 . . . . . . . . . . . .10
3P18U3/18 . . . . . . . . . . . .10
3P18U3/21 . . . . . . . . . . . .10
3P18U3/24 . . . . . . . . . . . .10
3P18U3/27 . . . . . . . . . . . .10
3P18U3/30 . . . . . . . . . . . .10
3P18U3/33 . . . . . . . . . . . .10
3P18U3/36 . . . . . . . . . . . .10
3P18U3/39 . . . . . . . . . . . .10
3P18U3/42 . . . . . . . . . . . .10
3P18U3/45 . . . . . . . . . . . .10
3P18U3/48 . . . . . . . . . . . .10
3P18U3/51 . . . . . . . . . . . .10
3P18U3/54 . . . . . . . . . . . .10
3P18U3/57 . . . . . . . . . . . .10
3P18U3/6 . . . . . . . . . . . . .10
3P18U3/9 . . . . . . . . . . . . .10
3P18U3H/12 . . . . . . . . . .11
3P18U3H/15 . . . . . . . . . .11
3P18U3H/18 . . . . . . . . . .11
3P18U3H/21 . . . . . . . . . .11
3P18U3H/24 . . . . . . . . . .11
3P18U3H/27 . . . . . . . . . .11
3P18U3H/30 . . . . . . . . . .11
3P18U3H/33 . . . . . . . . . .11
3P18U3H/36 . . . . . . . . . .11
3P18U3H/39 . . . . . . . . . .11
3P18U3H/42 . . . . . . . . . .11
3P18U3H/45 . . . . . . . . . .11
3P18U3H/48 . . . . . . . . . .11
3P18U3H/51 . . . . . . . . . .11
3P18U3H/54 . . . . . . . . . .11
3P18U3H/57 . . . . . . . . . .11
3P18U3H/6 . . . . . . . . . . .11
3P18U3H/9 . . . . . . . . . . .11
3P25U3/12 . . . . . . . . . . . .10
3P25U3/15 . . . . . . . . . . . .10
3P25U3/18 . . . . . . . . . . . .10
3P25U3/21 . . . . . . . . . . . .10
3P25U3/24 . . . . . . . . . . . .10
3P25U3/27 . . . . . . . . . . . .10
3P25U3/30 . . . . . . . . . . . .10
3P25U3/33 . . . . . . . . . . . .10
3P25U3/36 . . . . . . . . . . . .10
3P25U3/39 . . . . . . . . . . . .10
3P25U3/42 . . . . . . . . . . . .10
3P25U3/45 . . . . . . . . . . . .10
3P25U3/48 . . . . . . . . . . . .10
3P25U3/51 . . . . . . . . . . . .10
3P25U3/54 . . . . . . . . . . . .10
3P25U3/57 . . . . . . . . . . . .10
3P25U3/6 . . . . . . . . . . . . .10
3P25U3/9 . . . . . . . . . . . . .10
3P25U3H/12 . . . . . . . . . .11
3P25U3H/15 . . . . . . . . . .11
3P25U3H/18 . . . . . . . . . .11
3P25U3H/21 . . . . . . . . . .11
3P25U3H/24 . . . . . . . . . .11
3P25U3H/27 . . . . . . . . . .11
3P25U3H/30 . . . . . . . . . .11
3P25U3H/33 . . . . . . . . . .11
3P25U3H/36 . . . . . . . . . .11
3P25U3H/39 . . . . . . . . . .11
3P25U3H/42 . . . . . . . . . .11
3P25U3H/45 . . . . . . . . . .11
3P25U3H/48 . . . . . . . . . .11
3P25U3H/51 . . . . . . . . . .11
3P25U3H/54 . . . . . . . . . .11
3P25U3H/57 . . . . . . . . . .11
3P25U3H/6 . . . . . . . . . . .11
3P25U3H/9 . . . . . . . . . . .11
400017 . . . . . . . . . . . . . . .25
BRS5 . . . . . . . . . . . . . . . .13
BRUL . . . . . . . . . . . . . . . .19
DB16 . . . . . . . . . . . . . . . .26
DB35 . . . . . . . . . . . . . . . .26
P35ULT . . . . . . . . . . . . . .19
P50UB . . . . . . . . . . . . . . .12
P50ULB . . . . . . . . . . . . . .19
P50UT . . . . . . . . . . . . . . .12
P95UB . . . . . . . . . . . . . . .13
Part No. Page Part No. Page Part No. Page Part No. Page
INDEX
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
#31
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
32
R-Series
E301611
Voltage Rating
Short Circuit Withstand Rating
(UL - Ratings)
Interrupting Capacity
(IEC/EN60898/60947-2)
480Y/277VAC
0.5-6A (RC): 10kA with no back-up fuse
8-63A (RC): 10kA with UL-listed
Class J back-up fuse; 5kA with no back-up fuse
0.5-63A (RC): 10kA
Altech UL1077
UL1077 Recognized
Supplementary
Protector
•DIN Rail Mounted
•17.5mm width per pole
•Thermal Magnetic
•480Y/277V AC, 50/60Hz
•10kA Short Circuit
Withstand Capacity
•Positive Trip indicator
(Green - off/tripped, Red - on)
•Applications (on the load side
of Branch Circuit Protection)
include: Sensitive Electronics,
Power Supplies, Appliance
circuits, etc.
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
#
Altech UL508Altech UL489
UL508 Listed
Manual Motor Controller
“Suitable as Motor Disconnect”
•DIN Rail Mounted
•17.5mm width per pole
•Thermal Magnetic
•480Y/277V AC, 50/60Hz
•10kA Short Circuit
Withstand Capacity
•Applications Include:
•AC Motor Starting, Across the Line
•AC General Use
•AC Resistance
•AC Discharge Lamps (Ballast)
•AC Incandescent Lamps (Tungsten)
508 listed
E137938
C22.2 No.14 certified
LR104391
V-EA Series
Voltage Rating
Short Circuit Withstand Rating
(UL/CSA - Ratings)
Group Short Circuit Withstand Rating
(UL/CSA - Ratings)
480Y/277VAC
0.3-25A: 1 pole - 42VDC; 2 Pole - 80VDC
30-60A: 1 pole - 24VDC; 2 Pole - 60VDC
0.3-60A (RC): 10kA with UL-listed
RK5 back-up fuse or MCCB
0.3-10A (RC): 10kA; 13-60A (RC): 5kA
no branch circuit protection required
L-Series, AC or DC
Miniature Molded Case
Circuit Breakers
UL489 Listed Circuit Breakers
•Available in AC and DC models
•DIN Rail Mounted
•17.5mm width
•Thermal Magnetic
•240V, 480Y/277V AC, 50/60Hz
•125VDC (1 pole); 250VDC (2pole)
•10kA Short Circuit
Interrupting Capacity
•Positive Trip indicator
(Green - off/tripped, Red - on)
•HACR Type 40°C
•Line/Load reversible
LISTED
E305318
33
Current/ Voltage Rating
AC Short Circuit Interrupting Rating
DC Short Circuit Interrupting Rating
0.2-63A/240VAC, 0.2-32A/480Y/277VAC
0.2-63A/125/250VDC
0.2-32A: 1 pole - 10kA@120, 240, 277V;
2-4 poles - 10kA@120, 240V, 480Y/277V;
33-63A: 1-4 poles - 10kA@120, 240V
0.2-32A: 1-2 poles - 10kA@125V;
33-63A: 1-2 poles - 10kA@250V
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com
34
TITLE - Title to the products of ALTECH shall remain with ALTECH
until payment is made in full by Customer. Such reservation of title is for
the purpose of securing the purchase price and shall not relieve
Customer of the duty to inspect the products upon receipt, to notify
ALTECH of any deficiencies or defects, and to exercise due care in the
use, installation, operation, and maintenance of the products when on
the premise of the Customer or under the control of the Customer.
Notwithstanding any reservation of title by ALTECH, risk of loss shall
pass to customer at any time of shipment.
SHIPMENT AND DELIVERY - All orders for destination in the
mainland United States (less Hawaii, Alaska and non-continental United
States possessions) will be shipped F.O.B. Flemington, N.J. All
destination, shipping and other charges shall be paid by the Customer in
accordance with ALTECH’s then current shipping and billing practices.
Delivery dates given in the acceptance of any order are approximate.
ALTECH shall not be liable for delays in delivery or in performance due
to causes beyond its reasonable control including acts of God, acts of
Customer, acts of civil or military authority, fires, strikes or other labor
disturbances, war, riot or delays in transportation. In the event of such
delay, the date of delivery or performance shall be extended for a period
equal to the time lost by reason of the delay.
PRICE - PRICES in any ALTECH publication are subject to change
without prior notification. Catalog prices are based on prices published
in the current price list. All written quotations are valid for thirty (30) days
from the date of quotation. Customer shall pay all sales, use, excise or
similar taxes whenever ALTECH must itself pay and/or collect such tax
from Customer arising out of the sale.
PAYMENT - Customer agrees to make payment within thirty (30)
days of date of the invoice from ALTECH. Customer agrees to pay a late
payment charge of one and one-half percent (1.5% per month, or the
maximum late payment charge permitted by applicable law, whichever is
less, on any unpaid amount for each calendar month (or fraction thereof)
that such payment is in default. Orders amounting to less than 100.00
will be billed at 100.00 plus freight. Full carton purchases are required.
In the event of referral to an attorney for collection, reasonable attorney’s
fees for collection of the overdue amount shall be paid by Customer. In
the event payment is not received within 30 days from the date of
invoice, any discount shall be cancelled and the full list price will be due.
LIMITED WARRANTY - ALTECH warrants to Customer that the
equipment purchases shall be free from defects in material and
workmanship under normal use and service for a period of one year
from shipment.
Written notice as an explanation of the circumstances of any claim
that the equipment has proved defective in material or workmanship
shall be given promptly by the Customer to ALTECH.
ALTECH will not be liable for any misuse, improper operations,
improper installation, improper maintenance, alteration, modification,
accident or unusual degradation of the equipment or parts due to an
unsuitable installation environment.
No representation of other affirmation of facts, including but not
limited to statements regarding capacity, suitability for use or
performance of the equipment, shall be or be deemed to be a warranty
or representation by ALTECH for any purpose, nor give rise to any
liability or obligation of ALTECH whatsoever.
Customer’s sole and exclusive remedy in the event of breach of
warranty, as set forth herein, is expressly limited to (1) the correction of
the defect by adjustment, repair, modification, or replacement, or (2)
issuance of a credit or refund of the purchase price for the defective
equipment at ALTECH’s election and sole expense.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT,
THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY EXTENDS ONLY TO THE CUSTOMER FROM
ALTECH OR ITS AUTHORIZED DISTRIBUTOR.
LIMITATION OF LIABILITY - IN NO EVENT, SHALL ALTECH BE
LIABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL,
CONSEQUENTIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF
ANY BREACH OF THIS AGREEMENT OR OBLIGATIONS UNDER THE
AGREEMENT.
ALTECH SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED
BY DELAY IN SHIPMENT, INSTALLATION OR FURNISHING OF
EQUIPMENT OR SERVICES UNDER THIS AGREEMENT.
No action arising out of any claimed breach of this Agreement may be
brought by either party more than two (2) years after the cause of action
has accrued.
PATENT INDEMNITY - ALTECH shall defend or settle any suit or
proceeding brought against Customer based on a claim that any
equipment made to ALTECH design and furnished hereunder
constitutes an infringement of any existing United States patent,
provided (ALTECH) is notified promptly in writing and is given complete
authorization and information required for the defense, and ALTECH
shall pay all damages and costs awarded against Customer, but shall not
be responsible for any costs, expense or compromise incurred or made
by Customer without ALTECH’s prior written consent. If any equipment
is in ALTECH’s opinion likely to or does become the subject of a claim
for patent infringement, ALTECH may at its option and expense procure
for Customer the right to continue using the device, modify it to become
non-infringing, but in the event ALTECH is not reasonably able to modify,
substitute, or otherwise procure for Customer the right to continue using
it, ALTECH will remove such equipment and refund to Customer the
amount paid in excess of a reasonable rental for past use.
ALTECH shall not be liable for any infringement or claim based upon
use of the equipment in combination with other equipment not supplied
by ALTECH or with modifications made by Customer.
The foregoing states the entire liability of ALTECH to Customer
arising from patent infringement.
SELLER’S REMEDIES - Should Customer fail to make any payment
within ten (10) days of its due date, or fail to perform any other of the
Customer’s obligation hereunder upon thirty (30) days written notice, or
should Customer be or become insolvent or be a party to any bankruptcy
receivership proceeding prior to full payment of all amounts payable
hereunder, ALTECH may: (a) with or without demand or notice to
customer declare the entire amount unpaid immediately due and
payable; (b) enter upon the premises where the equipment may be found
and remove it (Customer shall assemble the equipment and make it
available to ALTECH at a place reasonably convenient to both parties
and shall permit and assist ALTECH in effecting the retaking and
removal of the equipment); and (c) sell any or all the equipment as
permitted under applicable law, applying the proceeds of the sale to
payment of the expenses of retaking, repairing and selling the
equipment, reasonable attorney fees and to the satisfaction of all
indebtedness then due and unpaid under this Agreement. Any surplus
shall be paid to Customer and any deficiency shall be paid to ALTECH
by Customer.
The remedies provided herein shall be cumulative and in addition to
all other remedies provided by law or equity or under the Uniform
Commercial Code.
GOVERNING LAW - This agreement will be governed by the Laws
of the State of New Jersey.
GENERAL - This Agreement shall only become effective and
binding when either (a) it has been accepted and executed by an
authorized representative of ALTECH, or (b) the equipment has been
shipped to Customer, with or without acceptance in writing hereon.
Notice of acceptance is hereby waived by Customer. Customer hereby
acknowledges receipt of a true and complete copy hereof.
No addition to or modification of any of the Terms and Conditions of
Sale as they appear herein shall be binding upon ALTECH unless signed
in writing by duly authorized representative of ALTECH in Flemington,
N.J.
Typographical and clerical errors in quotations, orders and
acknowledgments are subject to correction.
This Agreement is not assignable without the prior written consent of
ALTECH. Any attempt to assign any of the rights, duties or obligations of
this Agreement without such consent is void.
If any provision or provisions of this Agreement shall be held to be
invalid, illegal or unenforceable, the validity, legality and enforceability, of
the remaining provisions shall not in any way be affected or impaired
thereby.
ALTECH is not responsible for failure to fulfill its obligation under this
Agreement due to causes beyond its control, or except as agreed herein.
THE CUSTOMER ACKNOWLEDGES THAT HE HAS READ THE
AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY
ITS TERMS AND CONDITIONS. FURTHERMORE, THE CUSTOMER
AGREES THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT
OF THE AGREEMENT BETWEEN THE PARTIES, WHICH
SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL
OR WRITTEN, EXPRESSED OR IMPLIED, AND ALL OTHER
COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE
SUBJECT MATTER OF THIS AGREEMENT.
STANDARD TERMS AND CONDITIONS OF SALE
Altech Corp.®• t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 35
Here are other great products available from Altech!
Altech offers a NEW Terminal Block catalog
with the most competitively priced blocks in
the industry. We feature screw and spring
clamp models for DIN rail and panel mount
applications. This advanced line of wire
termination products will increase your design
options and help to get the job done more
efficiently. Our line of blocks include feed-
through (single, double or triple level),
distribution, ground, fuse, disconnect,
thermocouple, surge suppressor and
indicator. A wide variety of accessories, tools
and ferrules are available.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
Altech offers a wide range of DIN Rail or panel
mount cable interface modules, relay interface
modules, power supplies, carrier modules,
and custom designed modules. Cable to
connector models include: D-Sub connectors,
ribbon cable connectors, and Dip socket
connectors to terminals. Standard relay
modules from 1 to 16 channels, and safety
relay modules from 1 to 16 channels and up to
10 poles are included. The catalog also
contains switching power supplies, linear
power supplies, and custom designed
interface modules.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
Circuit Protection Devices Interface Modules and Power Supplies
Terminal Blocks
Liquid Tight Strain Reliefs
DIN Rail Power Supplies
This 64-page catalog introduces Altech’s full
line Liquid Tight Strain Reliefs (Cord Grips)
which are used to seal cable entries, keep
contaminant’s from entering enclosures,
provide strain relief and thus reduce stress on
components and termination points inside
enclosures. Available in standard, high-
performance, and economy versions,
functions include Straight-Through, Increased
Strain Relief, Bend Protection, Pull/Bend
Protection, Multi-conductor, Flat Cable and
EMI/RFI. They can be used with almost any
type of cable, cord or conductor - solid,
stranded, flat, shielded, high temperature, etc.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
Altech the market leader in UL508 Manual
Motor Controllers/ Miniature Circuit Breakers
now introduces UL489 Miniature Circuit
Breakers and UL1077 Supplementary
Protectors. The UL489 versions are DIN rail
mounted, 17.5mm wide, thermal magnetic,
240V, 480Y/277V AC, 50/60Hz, 125 and 250
VDC models, with short circuit interrupt
capacity of 10kA, a positive trip indicator, and
are line/load reversible. The UL1077 versions
are DIN rail mounted, 17.5mm wide, thermal
magnetic, 480Y/277V AC, 50/60Hz, a short
circuit withstand capacity 10kA, have a
positive trip indicator.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
Altech DIN RAIL mountable power supplies
have Universal AC input. They are suitable for
industrial and automation applications.
• UL508 Listed
• Installed on DIN rail TS35/ 7.5 or 15
• Available from 30-960W
• Protections: Short circuit / Overload /
Over-voltage / Over temperature
• Cooling by free air convection
• Worldwide approvals
• 3 year warranty
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
Contactors and More!
Altech’s now carries contactors, mini
contactors, definite purpose contactors &
overload relays. The contactors come in 3
and 4 pole configurations at 9A to 800A.
Available in Single Phase (115 -230V) and
Three Phase (200 - 575V) AC and DC
models. A large variety of coil voltages are
supported and the accessories are auxiliary
contacts and overload relays. The mini
contactors come in screw clamp, fast-on,
cage clamp and solder pin types.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
www.altechcorp.com
Industrial Enclosures
Altech’s expanded line of TK Industrial
Enclosures, with metric knockouts, is here.
Now our entire line of industrial enclosures is
in metric. Metric knockouts align with
international standards making selection
easier and more universal. Plus the PG
standard is still available. All of Altech’s
enclosures are internationally accepted and
stand up to the harshest environments. They
protect against dust, water and corrosion
while enhancing the value of your product.
Rated up to IP66 (NEMA type 4x), Altech
enclosures are available in a wide range of
sizes.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
www.altechcorp.com
Motor Disconnect Switches
Altech’s line of Motor Disconnect Switches are
UL 508 listed as Manual Motor Controllers for
AC Motor Starting Across-the-line and AC
General use. This new 16 page catalog
includes the 3 different handle designs, which
are all available in gray/black or yellow/red
housings. Electrical ratings are 25-150A /
600V. The switches are non-fused DIN Rail
mountable. Neat features include: snap-on
auxiliary switches, door mounting kit and a
retrofit 30A fuse holder. Also featured are
Enclosed Motor Disconnect Switches & Fused
Enclosed Motor Disconnect Switch (30A) in
plastic or stainless housings.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
www.altechcorp.com
Altech Corporation
35 Royal Road
Flemington, NJ 08822-6000
P 908.806.9400 • F 908.806.9490
www.altechcorp.com
Altech Corp.® 348-102013-2M
Printed October 2013
