8_73850_Accessories 117248 Catalog

: Pdf 117248-Catalog 117248-Catalog 662488 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 54

Download
Open PDF In Browser	View PDF

ACCESSORIES

Accessories
Cables & Wiring Products . . . . . . . . . . page 174
• Choice of cable styles and lengths for each sensor or
module makes installation easier.
• PICO-GUARD plastic optical fibers are available in precut
lengths or in bulk.
• Cable glands and conduit adapters are available for use
with bulk cable.
• Interface boxes supply 24V dc power to emitters and
receivers.
• Indicator lights and lamps show remote indication of
device status.
• Contactor accessories enhance the use of high current
for a safety system.
Mounting Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 190
• Broad offering of bracket styles makes it easy to install sensors vertically, horizontally, or diagonally.
• Swivel brackets offer greater range of motion.
• Adapter brackets provide mounting flexibility.
• Retrofit brackets enable you to install a different emitter/receiver using existing mounting holes.
• Replacement brackets are available for brackets included with emitters/receivers.

Explosive & Harsh Duty . page 212

• Mirrors expand guarding to multiple
sides of an area using one emitter/
receiver pair.
• Rotating end caps allow mirrors to rotate
to any angle.
• Glass and stainless steel models include
brackets for quick installation.

• Lens shields protect emitter and receiver
lenses from impact and contamination.
• Tubular enclosures guard entire
EZ-SCREEN® or MINI-SCREEN® emitter/
receiver in a washdown environment.
• Protective enclosures provide rugged
protection for emitters/receivers and
mirrors.
• Explosion-proof enclosures protect
emitters/receivers in environments with
flammable gases, liquids or dust.

Stands . . . . . . . . . . . . page 209

Replacement Parts. . . page 220

• Stands reliably support Banner light
screens and corner mirrors.
• Standalone and mounting models have
dual channels to allow easy and accurate
height adjustment.
• Protective stands shield emitters/
receivers from impact and debris.

• Parts are available to replace lost
or damaged parts or to retrofit other
manufacturers’ parts.
• Replacement parts are designed to be
easy to swap in.

More information online at

bannerengineering.com

173

ACCESSORIES

Corner Mirrors . . . . . page 204

ACCESSORIES
Cables & Wiring Products

4-Pin Euro-Style Cables
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 20 or 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

Style

MQDC-406
2
1
3

4

MQDC-415
MQDC-430

Female
Straight

MQDC-430RA

4

3

Used With

9m

2m
Female
Right Angle

ø 15 mm

• STB w/solid-state
relay
• Muting Module

M12 x 1

44 mm
max.
38 mm
max.

5m

38 mm
max.

9m
M12 x 1

1

2

5m

15 m

MQDC-406RA
MQDC-415RA

Dimensions

2m

MQDC-450

1 = Brown
2 = White
3 = Blue
4 = Black

Length

MQDC-450RA

15 m

MQDMC-406

2m

MQDMC-415
MQDMC-430

Male
Straight

MQDMC-450

MQDMC-415RA
1 = Brown
2 = White
3 = Blue
4 = Black

MQDMC-430RA

10 m

2m
Male
Right Angle

• Muting Module

5m

15 m

MQDMC-406RA

ø 15 mm

ø 15 mm
44 mm
max.

M12 x 1

38 mm
max.

5m
38 mm
max.

10 m
M12 x 1

MQDMC-450RA

15 m

CABLES &
WIRING

ø 15 mm

4-Pin Euro-Style Cables - Double Ended

BRACKETS

Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 or 20 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

Pinout

Model

Male

REPLACEMENT
PARTS

MQDEC-403SS
1

2

4

ACCESSORIES

3

Female
2
1

Length

Dimensions

Used With

1m
ø 15 mm

MQDEC-406SS
MQDEC-412SS
MQDEC-420SS

2m
Male
Straight/
Female
Straight

4m

44 mm
max.

M12 x 1

7m
ø 15 mm

MQDEC-430SS

10 m

MQDEC-450SS

15 m

MQDEC-403RS

1m

MQDEC-406RS

2m

44 mm
max.

M12 x 1

38 mm
max.

3

4

MQDEC-412RS
MQDEC-420RS
1 = Brown
2 = White
3 = Blue
4 = Black

174

Style

More information online at

Male Right
Angle/
Female
Straight

M12 x 1

7m

MQDEC-430RS

10 m

MQDEC-450RS

15 m

bannerengineering.com

38 mm
max.

4m
ø 15 mm

ø 15 mm
44 mm
max.

M12 x 1

• Muting Module

ACCESSORIES
Cables & Wiring Products

5-Pin Euro-Style Cables
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 or 20 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Pinout

Model
2
3
5

1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray

MQDC1-515

length

Female
Straight

Used With

9m

MQDC1-506RA

2m
Female
Right
Angle

• STB w/em relay
ø 15 mm

5m

MQDC1-530

MQDC1-515RA

Dimensions

2m

MQDC1-506

1
4

Style

M12 x 1

44 mm
max.

38 mm
max.
38 mm
max.

5m
M12 x 1

MQDC1-530RA

9m

ø 15 mm

5-Pin Euro-Style Cables with Green/Yellow Grounding Wire
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

Length

2

QDE-515D

5m

3
5

QDE-525D

8m

1
4

Style

QDE-550D
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Green/Yellow

Female
Straight

Dimensions

Used With

ø 15 mm

15 m
23 m

QDE-5100D

30 m

CABLES &
WIRING
BRACKETS

ø M12 x 1

46 mm
max.

QDE-575D

• EZ-SCREEN
Emitters w/5-pin
QD & Test (14 &
30 mm Resolution)
• AC Interface Boxes

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

5-Pin Euro-Style Cables with Shield and "Twisted Pair"

Pinout

Model

Style

Length

Dimensions

Used With

2
1
3
5

4

• MICRO-SCREEN
QDU-515C

5m
43 mm max.

QDU-525C
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Drain

ACCESSORIES

Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 20 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Female
Straight

8m
M12 x 1
14.2 mm

QDU-550C

15 m

More information online at

bannerengineering.com

175

ACCESSORIES
Cables & Wiring Products

5-Pin Euro-Style Cables - Double Ended
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

Female
2

Style

Length

DEE2R-51D

0.3 m

DEE2R-53D

1m

DEE2R-58D

2.4 m

Dimensions

Used With
• EZ-SCREEN
Emitters w/5-pin
QD & Test
(14 & 30 mm
Resolution)
• AC Interface Boxes

1
3
5

4

ø 15 mm

DEE2R-515D

Male
1
2

DEE2R-525D

4
5

3

Female
Straight/
Male
Straight

4.5 m

42.0 mm
max.

M12 x 1

8m
ø 15 mm

1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gn/Ye

DEE2R-550D

15 m

DEE2R-575D

23 m

DEE2R-5100D

30 m

M12 x 1

48.5 mm
max.

8-Pin Euro-Style Cables
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

CABLES &
WIRING
BRACKETS

Pinout

CORNER
MIRRORS

Model

2

3
4
5

1
7
6

STANDS
HARSH DUTY
SOLUTIONS

5m

QDE-825D

8m

ACCESSORIES

Dimensions

Used With

8

REPLACEMENT
PARTS

176

Length

QDE-815D

QDE-850D
1 = Brown
2 = Or/Bk
3 = Orange
4 = White

Style

5 = Black
6 = Blue
7 = Gn/Ye
8 = Violet

More information online at

Female
Straight

ø 15 mm

15 m
46 mm
max.

QDE-875D

23 m

QDE-8100D

30 m

bannerengineering.com

ø M12 x 1

• EZ-SCREEN
Emitters &
Receivers w/8-pin
QD (14 & 30 mm
Resolution)
• EZ-SCREEN Emitters
& Receivers
w/8-pin QD
(Point & Grid)
• EZ-SCREEN Type 2
• AC Interface Boxes

ACCESSORIES
Cables & Wiring Products

8-Pin Euro-Style Cables - Double Ended
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

Female
2

3
4
5

1
7
6

Style

Length

DEE2R-81D

0.3 m

DEE2R-83D

1m

DEE2R-88D

2.4 m

Dimensions

Used With

8
ø 15 mm

DEE2R-815D

Male
7
6

1
2
3
4

DEE2R-825D

Female
Straight/
Male
Straight

4.5 m

M12 x 1

42.0 mm
max.

8m
ø 15 mm

5
8

1 = Brown
2 = Or/Bk
3 = Orange
4 = White

5 = Black
6 = Blue
7 = Gn/Ye
8 = Violet

• EZ-SCREEN
Emitters &
Receivers w/8-pin
QD (14 & 30 mm
Resolution)
• EZ-SCREEN Emitters
& Receivers
w/8-pin QD
(Point & Grid)
• EZ-SCREEN Type 2
• AC Interface Boxes

DEE2R-850D

15 m

DEE2R-875D

23 m

DEE2R-8100D

30 m

M12 x 1

48.5 mm
max.

4-Pin Micro-Style Cables
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 or 20 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 125V ac/150V dc

CABLES &
WIRING
BRACKETS

Pinout

Model
4

MQEAC-406

1

MQEAC-415

3
2

Length
2m

Female
Straight

9m

MQEAC-406RA

2m

MQEAC-430RA

Female
Right
Angle

ø 15 mm

5m

MQEAC-430

MQEAC-415RA

Dimensions

44 mm
max.

CORNER
MIRRORS

• SI-HG80 HingeStyle Switches

STANDS

M12 x 1

HARSH DUTY
SOLUTIONS

38 mm
max.

REPLACEMENT
PARTS
38 mm
max.

5m
9m

Used With

ACCESSORIES

1 = Red/Black
2 = Red/White
3 = Red
4 = Green

Style

M12 x 1
ø 15 mm

More information online at

bannerengineering.com

177

ACCESSORIES
Cables & Wiring Products

3-Pin Mini-Style Cable
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

1
2

3

Length

QDS-315C

5m

QDS-325C

8m

QDS-350C

1 = Green/Yellow
2 = Brown
3 = Blue

Style

Female
Straight

Dimensions

Used With
• EZ-SCREEN
Emitters w/3-pin
QD (Point & Grid)

58 mm

7/8-16UNF

15 m
ø 26 mm

QDS-375C

23 m

QDS-3100C

30 m

4-Pin Mini-Style Cables
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

2

4

1

3

Style

MBCC-406

Length

Dimensions

2m
61 mm
max.

MBCC-412

CABLES &
WIRING

1 = Brown
2 = White
3 = Blue
4 = Black

BRACKETS
CORNER
MIRRORS

Female
Straight

MBCC-430

4m

7/8-16UN-2B

Used With
• STB w/solid-state
relay
• OTB w/solid-state
relay

ø 28 mm
max.

9m

STANDS

5-Pin Mini-Style Cables with Yellow Wire

HARSH DUTY
SOLUTIONS

Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

REPLACEMENT
PARTS

ACCESSORIES

Pinout

Model

Style

Length

MBCC-506

2m

2

4
3

61 mm
max.

MBCC-512
1 = Black
2 = Blue
3 = Yellow
4 = Brown
5 = White

More information online at

Female
Straight

MBCC-530

bannerengineering.com

4m

9m

Used With
• STB w/em relay
• OTB w/em relay

1

5

178

Dimensions

7/8-16UN-2B

ø 28 mm
max.

ACCESSORIES
Cables & Wiring Products

5-Pin Mini-Style Cables with Green/Yellow Grounding Wire
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 20 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Pinout

Model

Style

Length

Dimensions

Used With

1

5

QDS-515C

5m

2

4
3

58 mm

QDS-525C
1 = Black
2 = Blue
3 = Green/Yellow
4 = Brown
5 = White

Female
Straight

QDS-550C

7/8-16UNF

• EZ-SCREEN
Emitters w/5-pin
QD & TEST (Point
& Grid)

8m
ø 26 mm

15 m

5-Pin Mini-Style Cables with Shield and "Twisted Pair"
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Pinout

Model
1

5

Style

Length

QDC-515C

5m

QDC-525C

8m

Dimensions

Used With
• MINI-SCREEN

2

4
3

58 mm

QDC-550C
1 = Black
2 = Blue
3 = Drain
4 = Brown
5 = White

Female
Straight

CABLES &
WIRING

7/8-16UNF

15 m
ø 26 mm

BRACKETS

QDC-5100

30 m

CORNER
MIRRORS

QDC-5150

45 m

STANDS
HARSH DUTY
SOLUTIONS

8-Pin Mini-Style Cables

REPLACEMENT
PARTS

Pinout
6

Model
7

1

5

2

4

3
8

1 = Brown
2 = Or/Bk
3 = Orange
4 = White

5 = Black
6 = Blue
7 = Gn/Ye
8 = Violet

Style

Length

QDS-815C

5m

QDS-825C

8m
Female
Straight

Dimensions

58 mm

ACCESSORIES

Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Used With
• EZ-SCREEN
Receivers w/8-pin
QD (Point & Grid)
• Muting Module
7/8-16UNF

ø 26 mm

QDS-850C

15 m

QDS-875C

23 m

More information online at

bannerengineering.com

179

ACCESSORIES
Cables & Wiring Products

Splitters
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Connections
Pinout

Model

Female

CSB-M1240M1240
2

Branches

Trunk

4-Pin Euro QD
No Branch
Female

No Trunk
Male

Used With
• Muting Module

1
3

4

CSB-M1241M1241

0.3 m
Male

CSB-M1248M1241

2.5 m
Male

Male

CSB-M12415M1241

4

3

1 = Brown
2 = White
3 = Blue
4 = Black

Female

BRACKETS

2

CORNER
MIRRORS

3
4
5

1
7
6

8m
Male

CSB-UNT425M1241

8m
Unterminated
8-Pin Euro QD
No Branch
Female

0.3 m
Male

CSB-M1288M1281

2.5 m
Male
8-Pin
Euro QD
2 x 0.3 m
Female

CSB-M12815M1281

HARSH DUTY
SOLUTIONS

7
6

1

ACCESSORIES

2
3
4

1 = Brown
2 = Or/Bk
3 = Orange
4 = White

5m
Male

CSB-M12825M1281

8m
Male

CSB-UNT825M1281

8m
Unterminated

Male

REPLACEMENT
PARTS

No Trunk
Male

CSB-M1281M1281

8

STANDS

5m
Male

CSB-M12425M1241

CSB-M1280M1280
CABLES &
WIRING

4-Pin
Euro QD
2 x 0.3 m
Female

1

2

• EZ-SCREEN
Emitters &
Receivers w/8-pin
QD (14 & 30 mm
Resolution)
• EZ-SCREEN Emitters
& Receivers
w/8-pin QD
(Point & Grid)
• EZ-SCREEN Type 2
• AC Interface Boxes
• EZ-LIGHT Indicator
Light
• Muting Module

5

Dimensions

8

5 = Black
6 = Blue
7 = Gn/Ye
8 = Violet

18.0 mm
25.0 mm

ø 15 mm

(Branches)

(Trunk)

M12 x 1
48.5 mm

18.0 mm
ø 15 mm
42.0 mm

180

More information online at

bannerengineering.com

M12 x 1

ACCESSORIES
Cables & Wiring Products

QD End-Caps
Replace or convert EZ-SCREEN Grid and Point hard-wire terminal chamber end cap to QD model.

Model

Style

EZA-QDE-3

3-pin
Mini QD

EZA-QDE-5

5-pin
Mini QD

EZA-QDR-8

8-pin
Mini QD

Description

Used With
• EZ-SCREEN Emitters w/Terminal
Chamber (Point & Grid)

Converts terminal chamber
end cap to QD model

• EZ-SCREEN Emitters w/Terminal
Chamber & TEST (Point & Grid)
• EZ-SCREEN Receivers w/Terminal
Chamber (Point & Grid)

Unterminated Bulk Cable
Cable: PVC jacket
Conductors: 20 AWG high-flex strand, PVC insulation
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Model

Length

UTB-325C

8m

UTB-350C

15 m

UTB-3100C

30 m

UTB-3250C

75 m

UTB-525C

8m

UTB-550C

15 m

UTB-5100C

30 m

UTB-5250C

75 m

UTB-825C

8m

UTB-850C

15 m

UTB-8100C

30 m

UTB-8250C

75 m

Description

Used With

3-conductor
(Brown, Blue,
Green/Yellow)

• EZ-SCREEN Emitters w/Terminal
Chamber (Point & Grid)
• AC Interface Boxes

5-conductor
(Black, Blue, Brown,
White, Green/Yellow)

• EZ-SCREEN Emitters w/Terminal
Chamber & TEST (Point & Grid)
• AC Interface Boxes
CABLES &
WIRING

8-conductor
(Brown, Orange/Black,
Orange, White, Black, Blue,
Violet, Green/Yellow)

• EZ-SCREEN Receivers w/Terminal
Chamber (Point & Grid)
• AC Interface Boxes

BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

8-Pin Euro-Style Cables
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 AWG high-flex stranded, gold-plated contacts
Temperature: -40° to +90° C
Voltage Rating: 250V ac/300V dc

Model
7
6

1
2
3
4

5

Style

QDE2R4-815D

Length

• EZ-SCREEN
Cascade Receivers
(CSSI to hard
contacts)

8

5 = n.c.
6 = n.c.
7 = n.c.
8 = White

QDE2R4-825D

Used With

5m
ø 15 mm

Male
Straight
1 = Brown
2 = Black
3 = Blue
4 = n.c.

Dimensions

ACCESSORIES

Pinout

REPLACEMENT
PARTS

48.5 mm
max.

M12 x 1

8m

More information online at

bannerengineering.com

181

ACCESSORIES
Cables & Wiring Products

Cable Glands
• Secures the cable end in the housing and seals the point of connection.
• Available for EZ-SCREEN Point and Grid, rope pulls and safety interlock switches.

Model

Size

For Cable Diameter

Dimensions
21.8 mm

34.2 mm

SI-QS-CG13

PG13.5

3.0 to 8.0 mm

M16 x 1.5 Plastic

3.0 to 8.0 mm

• EZ-SCREEN w/Terminal Chamber
(Point & Grid)

PG 13.5

19.0 mm

34.0 mm

SI-QS-CGM16

Used With

• SI-QS75 Safety Interlock Switches
• SI-LS83 Safety Interlock Switches

M16 x 1.5

SI-QS-CGM20

M20 x 1.5 Plastic

37.0 mm

25.0 mm

• SI-QS90 Safety Interlock Switches
• SI-LS100 Safety Interlock Switches
• SI-LS31 Safety Interlock Switches
• SI-LS42 Safety Interlock Switches
• RP-LS42 Rope Pull Switches

35.5 mm

24.0 mm

• SI-LM40 Safety Interlock Switches
• SI-QM100 Safety Interlock Switches
• SI-LM40 Safety Interlock Switches
• RP-LM40 Rope Pull Switches
• RP-QM72/QMT72 Rope Pull Switches
• RP-QM90 Rope Pull Switch

5.0 to 12.0 mm
M20 x 1.5

SI-QM-CGM20

M20 x 1.5 Metal

5.0 to 12.0 mm

M20 x 1.5

Conduit Adapters
• Connects conduit of different diameters.
• Available for EZ-SCREEN Point and Grid, rope pulls and safety interlock switches.

CABLES &
WIRING

Model

Size

Thread Conversion

Dimensions

Used With

BRACKETS
23.5 mm

CORNER
MIRRORS

SI-QM-13

1/2" NPT to
PG13.5

PG 13.5 to
1/2" NPT

1/2" NPT
Internal Thread

• EZ-SCREEN w/Terminal Chamber
(Point & Grid)

PG13.5

24.0 mm

STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

MM

SI-QM-13-M20

M20 to PG13.5

PG 13.5 to
M20

-
)NTERNAL4HREAD

• EZ-SCREEN w/Terminal Chamber
(Point & Grid)

0'

1/2"-14 NPT
Internal Thread

24.0 mm

• SI-QS75 Safety Interlock Switches
• SI-LS83 Safety Interlock Switches

25.0 mm

SI-QS-M16

1/2" – 14 NPT
Plastic

M16 x 1.5 to
1/2" – 14 NPT

M16 x 1.5

25.0 mm

SI-QS-M20

1/2" – 14 NPT
Plastic

M20 x 1.5 to
1/2" – 14 NPT

1/2"-14 NPT
Internal Thread

24.0 mm

• SI-QS90 Safety Interlock Switches
• SI-LS100 Safety Interlock Switches
• SI-LS31 Safety Interlock Switches
• SI-LS42 Safety Interlock Switches
• RP-LS42 Rope Pull Switches

M20 x 1.5

1/2"-14 NPT
Internal Thread
23.0 mm

SI-QM-M20

1/2" – 14 NPT
Metal

M20 x 1.5 to
1/2" – 14 NPT

M20 x 1.5
24.0 mm
O-ring

182

More information online at

bannerengineering.com

• SI-LM40 Safety Interlock Switches
• SI-QM100 Safety Interlock Switches
• SI-LM40 Safety Interlock Switches
• RP-LM40 Rope Pull Switches
• RP-QM72/QMT72 Rope Pull Switches
• RP-QM90 Rope Pull Switch

ACCESSORIES
Cables & Wiring Products

4-Pin Euro-Style Field-Wireable Connectors
Cable: Gold-plated, 4-pin models rated 250V ac/dc max., 4 A max.
Cable Diameter: 4.0 to 5.0 mm
Temperature: -25° to +90° C
Environmental Rating: NEMA 6P, IP67

Model

Style

Dimensions

Pinout

Used With
• Muting Module

60 mm
10 mm

Male
Straight

FIC-M12M4

20 mm
M12 x 1

15.0 mm

41 mm

20 mm
M12 x 1

FIC-M12M4A

Male
Right Angle

30.5 mm

15.0 mm

MSSI Cordsets for use with Muting Modules
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Cable Diameter: 20 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40° to +80° C
Voltage Rating: 250V ac/300V dc

Model

Length

DESE4-508D

2.4 m

DESE4-515D

5m

DESE4-525D

8m

DESE5-508D

2.4 m

DESE5-515D

5m

DESE5-525D

8m
2.4 m

DES4-515C

5m

DES4-525C

8m

QDS-715C

5m

QDS-725C

8m

QDS-750C

15 m

Used With
• EZ-SCREEN Receivers
w/Euro QDs
(14 & 30 mm Resolution)
• Muting Modules

8-Pin
Female
Euro QD
to
7-Pin Male
Mini QD

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS

• EZ-SCREEN Type 2
• Muting Modules

8-Pin
Female
Euro QD
to
7-Pin Male
Mini QD

STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

• EZ-SCREEN Receivers
w/Mini QDs (Grid & Point)
• Muting Modules

8-Pin
Female
Mini QD
to
7-Pin Male
Mini QD

ACCESSORIES

DES4-508C

Description

• EZ-SCREEN Receivers
w/Terminal Chamber
(Grid & Point)
• Safeguarding w/Hard-Wired
Contacts
• Muting Modules

Unterminated
end
to
7-Pin Male
Mini QD

More information online at

bannerengineering.com

183

ACCESSORIES
Cables & Wiring Products

AC Emitter/Receiver Interface Boxes

QD CABLES

8-Pin Euro +
3-, 5- & 8-Pin Mini

• Provides AC power for up to three receivers or two cascaded emitter/receiver pairs, with external
device monitoring (EDM) available.
• Supplies +24V dc power at 0.7 amps (16.8 W max. power) and accepts input voltages from 100-250V ac (50-60 Hz).

Safety
Outputs

Model

EDM

Emitter/
Receiver
Connection

PAGE 176

AC Power
Connection

Output
and EDM
Connections

Hard-wired

Hard-wired

Hard-wired

Hard-wired

3-Pin
Mini QD

8-Pin
Mini QD

3-Pin
Mini QD

5-Pin
Mini QD

3-Pin
Mini QD

5-Pin
Mini QD

Used with

Data
Sheet

• EZ-SCREEN
EZAC-R9-QE8

3 NO

EZAC-R11-QE8

2 NO
&
1 NC

EZAC-R15A-QE8-QS83

1 NO
&
1 SPDT

EZAC-R8N-QE8-QS53

1 NO
&
1 NC

EZAC-R10N-QE8-QS53

Selectable
1- or 2Channel or
no EDM

1-Channel

8-Pin
Euro QD

Power
Monitoring

2 NO

AC Emitter Interface Boxes

QD CABLES

5- & 8-Pin Euro +
3- & 5-Pin Mini

• Provides AC power for up to four emitters, with external device monitoring (EDM) available.
• Supplies +24V dc power at 0.7 amps (16.8 W max. power) and accepts input voltages from 100-250V ac (50-60 Hz).
CABLES &
WIRING

AC Power
Connection

EZAC-E-QE8

8-Pin Euro QD

Hard-wired

• EZ-SCREEN SLSE..-..Q8
(without Test input)

EZAC-E-QE5

5-Pin Euro QD

Hard-wired

• EZ-SCREEN SLSE..-..Q5
(with Test input)

CORNER
MIRRORS
STANDS

PAGE 174

Emitter
Connection

Model

BRACKETS

120321

Used with

HARSH DUTY
SOLUTIONS

120321

REPLACEMENT
PARTS

ACCESSORIES

Data
Sheet

EZAC-E-QE8-QS3

8-Pin Euro QD

3-Pin
Mini QD

• EZ-SCREEN SLSE..-..Q8
(without Test input)

EZAC-E-QE5-QS5

5-Pin Euro QD

5-Pin
Mini QD

• EZ-SCREEN SLSE..-..Q5
(with Test input)

NC = Normally Closed, NO = Normally Open

184

More information online at

bannerengineering.com

ACCESSORIES
Cables & Wiring Products

AC Interface Box Specifications
Input Voltage and Current

100-230V ac ±15%; 16.8W max., output 24V dc 0.7A
Input current: typ. 0.37A @ 100V ac in
typ. 0.23A @ 200V ac in
Inrush current: typ. 15A @ 100V ac in (5 milliseconds max.)
typ. 30A @ 200V ac in (5 milliseconds max.)

Output Voltage and Current

24V dc @ 0.7 A (16.8 W)
SELV; capable of buffering 20 milliseconds power interruptions

Supply Protection Circuitry

Protected against transient voltages

Output Configuration

Models EZAC-R.. only; see models listing on previous page.
Each normally open output channel is a series connection of contacts from two forced-guided (positive-guided)
relays, K1-K2. The normally closed contact is a parallel connection of contacts from K1-K2.
Contacts: AgNi, 5 µm gold-plated
Low Current Rating:
Caution: The 5 µm gold-plated contacts allow the switching of low current/low voltage.
To preserve the gold plating on the contacts, the following max. values should not be exceeded at any time:
Min. voltage: 1V ac/dc
Min. current: 5 mA ac/dc
Min. power: 5 mW (5 mVA)

Max. voltage: 60V ac/dc
Max. current: 300 mA
Max. power: 7 W (7 VA)

High Current Rating:
If higher loads must be switched through one or more of the contacts, the minimum and maximum values of
the contact(s) changes to:
Min. voltage: 15V ac/dc
Max. voltage: 250V ac/dc
Min. current: 30 mA ac/dc
Max. current: 8 A
Min. power: 5 W (5 VA)
Max. power: 200 W (2000 VA)
Mechanical life: 50,000,000 operations
Electrical life: 100,000 operations (typical @ 200 W [2000 VA] switched power, resistive load)
Feedback Contact Rating (Y1-Y2, Y3-Y4):
Min. voltage: 1V ac/dc
Min. current: 5 mA ac/dc
Min. power: 5 mW (5 mVA)

Max. voltage: 60V ac/dc
Max. current: 300 mA
Max. power: 7 W (7 VA)

CABLES &
WIRING

NOTE: Transient suppression is recommended when switching inductive loads. Install suppressors across
load. Never install suppressors across output contacts.
Output Response Time

10 milliseconds max.

Status Indicators

Models EZAC-R.. : One bicolor (Red/Green) LED indicator on box cover indicates the power and output status of
internal relays K1 and K2.
Models EZAC-E.. : One Green LED indicator on box cover indicates the power status (ON when power is ON).

Construction

Welded steel box with yellow polyester powder paint finish

Environmental Rating

IEC IP65

Vibration Resistance

10 to 50 Hz @ 0.35 mm displacement per IEC 68-2-6

Mounting

Box provides flanges for screw mounting; can be mounted directly to EZ-SCREEN receiver or emitter housing.

Operating Conditions

Temperature: 0° to +55° C

Application Notes

The box offers a field-replaceable relay module; see Repairs section of data sheet for more information.

Certifications

Approvals are in process.

Wiring Diagrams

EZAC-R9QE8: WD009 (p. 250)
EZAC-R11-QE8: WD010 (p. 251)
EZAC-R15A-QE8-QS83: WD011 (p. 252)
EZAC-R8N-QE8-QS53: WD012 (p. 252)
EZAC-R10N-QE8-QS53: WD013 (p. 253)
EZAC-E-QE8/QE5: WD014 (p. 253)

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

bannerengineering.com

185

ACCESSORIES

Relative humidity: 90% @ +55° C (non-condensing)

More information online at

BRACKETS

ACCESSORIES
Cables & Wiring Products

Mechanically Linked Contactors*
Provides an additional 10 or 16 amp carrying capability to any safety system.

Coil
Voltage

Models
11-BG00-31-A12060

120V ac

11-BG00-31-D-024

24V dc

11-BF1601-12060

120V ac

11-BF16C01-024

24V dc

Contacts

3 NO
&
1 NC

Contact
Rating

Dimensions
(h x w x l)

10 amps

57 x 44 x 58 mm

10 amps

57 x 44 x 58 mm

16 amps**

80 x 44 x 80 mm

16 amps**

80 x 44 x 80 mm

Used With

Data
Sheet

• EZ-SCREEN
• PICO-GUARD
• MICRO-SCREEN
• MINI-SCREEN

111881

NC = Normally Closed, NO = Normally Open
* One Arc Suppressor is needed for each relay across the coil (see below).
** NC contact is rated at 10 amps

Auxiliary Contacts for Mechanically Linked Contactors
Adds contacts to mechanically linked contactors.

Models
11-BGX10-40

Contacts

Positively
Guided

4 NO

No
(Aux. only)

Used With
• 11-BG Series

• 11-BF Series
11-G484-30

3 NO

Data
Sheet

111881

Yes

NC = Normally Closed, NO = Normally Open
CABLES &
WIRING
BRACKETS

Suppressors for Mechanically Linked Contactors
Extends the life of the actuating device—such as a light screen or control module—that uses a mechanically linked contactor.

CORNER
MIRRORS
STANDS

Models

HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

Voltage

11-BGX77-048

48V dc

11-BGX77-240

125-240V ac

Used With

Data
Sheet

• 11-BG00-31-D024
• 11-BG00-31-A12060

111881
11-G318-48

48V dc

11-G477-240

125-240V ac

NC = Normally Closed, NO = Normally Open

186

More information online at

bannerengineering.com

• 11-BF1C01-024
• 11-BF1601-12060

ACCESSORIES
Cables & Wiring Products

EZ-LIGHT™ Smart Indicator Lights

QD CABLES

8-Pin Euro

• Indicates the status of a machine or process, using a solid or flashing color light in a sealed housing.
• Replaces panel indicators and post and stack lights with a single, compact unit.

Model

Construction

Connector*

LED Function

PAGE 176

Inputs

Used With

Data Sheet

• EZ-SCREEN

*

M18RGX8PQ8

18 mm
Threaded barrel
Nickel-plated brass

T18RGX8PQ8

18 mm
T-style
Right-angle
Thermoplastic
polyester

T30RGX8PQ8

30 mm
T-style
Right-angle
Thermoplastic
polyester

PNP

8-pin
Euro QD

Red/Green
indication follows
OSSD output of
the EZ-SCREEN
receiver

121901

PNP

PNP

A mating cable is required (see page 180). Typically a CSB splitter and DEE2R-8..D cables are used.

Indicator Lamps
• Indicates whether a switch is open or closed.
• Available in red or green, 120V ac or 24V ac/dc.

Supply
Voltage

Model
SI-PL3T-R

Lamp
Color

Thread

24V ac/dc
Red

SI-PL3A-R

120V ac
M20 x 1.5

SI-PL3T-G

24V ac/dc

Data
Sheet

Used With
• SI-QS90 Safety Interlock Switches
• SI-LS42 Safety Interlock Switches
• SI-QM100 Safety Interlock Switches
• RP-LS42 Rope Pull Switches
• RP-QM72/QMT72 Rope Pull Switches
• RP-QM90 Rope Pull Switch

CABLES &
WIRING
BRACKETS

—

CORNER
MIRRORS
STANDS

Green
SI-PL3A-G

HARSH DUTY
SOLUTIONS

120V ac

REPLACEMENT
PARTS

Muting Lamps
Supply
Voltage

Model

SSA-ML-A

Lamp
Color

Used with

Data
Sheet

• PICO-GUARD
• MICRO-SCREEN
• MINI-SCREEN
• EZ-SCREEN
• Muting Modules

Amber

24V ac/dc

SSA-ML-W

Overall
Height

383 mm

62097

White (clear)

More information online at

bannerengineering.com

187

ACCESSORIES

• Indicates when muting is active for optical safety features with a muting module.
• Uses a solid-state LEDs light, eliminating the need to replace bulbs.

ACCESSORIES
Cables & Wiring Products

PICO-GUARD™ Plastic Fiber Optics
Plastic optical fiber for use with Banner PICO-GUARD optical elements is available in bulk form (to be cut to length in the field)
or precut lengths with polished ends for maximum excess gain.

Bulk

Dimensions

Length

Cut Lengths with Polished Ends

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

188

Standard
Polyethylene Jacket

PVC
Sheath
&IBER
’MM

&IBER
’MM

06#3HEATH
’MM

0OLYETHYLENE*ACKET
’MM

0OLYETHYLENE*ACKET
’MM

Fluoropolymer
Sheath
&IBER
’MM
&LUOROPOLYMER3HEATH
’MM
0OLYETHYLENE*ACKET
’MM

9m

PIU430U

PIU430UXP

PIU430UXT

18 m

PIU460U

PIU460UXP

PIU460UXT

30.5 m

PIU4100U

PIU4100UXP

PIU4100UXT

61 m

PIU4200U

PIU4200UXP

PIU4200UXT

100.5 m

PIU4330U

PIU4330UXP

PIU4330UXT

152.5 m

PIU4500U

PIU4500UXP

PIU4500UXT

488 m

PIU41600U

PIU41600UXP

PIU41600UXT

0.3 m

PWS43P

PWXP43P

PWXT43P

0.5 m

PWS45P

PWXP45P

PWXT45P

0.7 m

PWS47P

PWXP47P

PWXT47P

1m

PWS410P

PWXP410P

PWXT410P

1.5 m

PWS415P

PWXP415P

PWXT415P

2m

PWS420P

PWXP420P

PWXT420P

2.5 m

PWS425P

PWXP425P

PWXT425P

3m

PWS430P

PWXP430P

PWXT430P

3.5 m

PWS435P

PWXP435P

PWXT435P

4m

PWS440P

PWXP440P

PWXT440P

4.5 m

PWS445P

PWXP445P

PWXT445P

5m

PWS450P

PWXP450P

PWXT450P

6m

PWS460P

PWXP460P

PWXT460P

7m

PWS470P

PWXP470P

PWXT470P

8m

PWS480P

PWXP480P

PWXT480P

9m

PWS490P

PWXP490P

PWXT490P

10 m

PWS4100P

PWXP4100P

PWXT4100P

11 m

PWS4110P

PWXP4110P

PWXT4110P

12 m

PWS4120P

PWXP4120P

PWXT4120P

13 m

PWS4130P

PWXP4130P

PWXT4130P

14 m

PWS4140P

PWXP4140P

PWXT4140P

15 m

PWS4150P

PWXP4150P

PWXT4150P

20 m

PWS4200P

PWXP4200P

PWXT4200P

25 m

PWS4250P

PWXP4250P

PWXT4250P

30 m

PWS4300P

PWXP4300P

PWXT4300P

More information online at

bannerengineering.com

ACCESSORIES
Cables & Wiring Products
7

PICO-GUARD™ Plastic Fiber Optic Accessories
Fiber optic devices used with PICO-GUARD optical elements improve performance and simplify installation.

Data
Sheet

SFA-FA

• Reduces excess gain in short-run applications
• Uses Banner 2.2 mm OD plastic fiber optic cable (1 mm core)
• Made of impact-resistant polycarbonate plastic
• Rated IEC IP67

109910

Splice

Description

SFA-FS

• Provides easy connection of two fiber sections
• Simplifies connecting and disconnecting fibers
• Uses Banner 2.2 mm OD plastic fiber optic cable (1 mm core)
• Made of impact-resistant polycarbonate plastic
• Rated IEC IP67

109910

Fiber Cutter

Attenuator

Model

PFC-2-25

• Uses Banner 2.2 mm OD diameter unterminated fiber optic cable (1 mm core)
• Contains 25 fiber cutters

—

PICO-GUARD™ Cable Glands and Conduits
Conduit and gland used with PICO-GUARD Grids provide MEK-resistant protection.

Model
SFA-FCC-008

2.4 m

SFA-FCC-015

4.5 m

SFA-FCC-025

7.5 m

SFA-FCC-050

15 m

SFA-FCC-100

30 m

SFA-FCC-CGM20

CABLES &
WIRING

Description

M20
Threads

BRACKETS

Conduit

• Made of flexible MEK-resistant polyamide
• Protects fiber
• Snaps into emitter/receiver
• Easily cuts to length

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

Cable
Gland

• Use with MEK-resistant conduit
• Made of MEK resistant polyamide
• Attaches conduit to emitter/receiver and PICO-GUARD controller

REPLACEMENT
PARTS

ACCESSORIES

More information online at

bannerengineering.com

189

ACCESSORIES
Brackets

EZS
R e s CR E E
olu N 14
tion
&3
0m
EZm
SCR
EEN
Cas
cad
EZe
SCR
EEN
Poi
nt
EZSCR
EEN
G ri
d
PI C
O
Poi - GUA
nt
RD
12 m
PI C
m
O-G
Poi
U
A
nt
RD
30 m
m
PI C
O-G
UAR
DG
MIC
ri d
R
O
Re c
S
C
eiv
er RE E N
Em
MIC
it te
r/
Box RO-SC
RE E
NM
eta
l
MIC
RO
-S C
REE
ND
MIN
IN B
I
R e c SCR
ox
eiv E E N
er
Em
i t te
Hea
r/
Em vy-Du
i t t e ty M
r/ R
ece INI-SC
ive
MIN
r REEN
I -SC
REE
NM
eta
MIN
l Bo
x
I -S C
REE
ND
IN B
EZox
SCR
EEN
Typ
e2

Banner Bracket

Page References

21

25

28

28

38

38

37

DIN-35-..
192

EZA-MBK-1
EZA-MBK-11
EZA-MBK-12

193

EZA-MBK-2
EZA-MBK-20
EZA-MBK-21

194

EZA-MBK-3
EZA-MBK-4
EZA-MBK-5

195

EZA-MBK-9
MSAMB
MSMB-1

CABLES &
WIRING

196

MSMB-3
MSMB-MSM-45

BRACKETS
CORNER
MIRRORS

197

MSMMB
MSVM-1
MSMV10-8

STANDS
HARSH DUTY
SOLUTIONS

MSMB-2

SFA-IMB1
198

REPLACEMENT
PARTS

SFA-IMB2
SMA-MBK-1

ACCESSORIES

SMB12MM
199

SMB1812SF
SMB30A
SMB30MM

200

SMB30SC
SMBAMS30P
SMBAMS30RA

201

SMBAMSBRA
SMBR55F01
SMBR55F02

202

SMBR55FRA
USCMB-..
USMB-1

203

USMB-6
USMB-8

190

More information online at

bannerengineering.com

42

45

46

58

63

64

65

78

DUO
-TO
UCH
SG
Mo
STB
dul
es
But
to n
s
DU
O -T
OU
CH
Mo
dul
OT B
es
But
to n
s
PI C
O-G
UAR
DC
o nt
PI C
O-G
roll
Rem UA
er
ote R D S
Dis
F
A
pla - R D
E -S
y
t
Mo op & G
nito
u ar
ri n g d
Mo
Saf
dul
et y
Mo
es
d u l M at M
es
oni
to ri
ng
Mu
ting
Mo
dul
es
Ex t
ens
ion
Mo
dul
es
I nt e
r fac
eM
o du
le s
PI C
O-G
UAR
DS
wit
c he
SM
BA M
s
SBR
AB
ra c
ket
SM
BA M
S30
RA
B ra
MS
c ke
MM
t
i rr o
rs
SS M
M ir
ror
s
MS
AS
t an
ds

ACCESSORIES

Brackets

Selection Chart

87
94
97
100
108
110
112
120
123
130
132
137
201

ACCESSORIES

More information online at

201
205
206
209

CABLES &
WIRING

BRACKETS

CORNER
MIRRORS

STANDS

HARSH DUTY
SOLUTIONS

REPLACEMENT
PARTS

bannerengineering.com

191

ACCESSORIES
Brackets

DIN-35-..

DIN rail is available in 70, 105 and 140 mm lengths, to hold one, two, or three modules.

Dimensions

Used With
MICRO-SCREEN DIN Modules

Two-Hand Control Modules

MINI-SCREEN DIN Modules

Safety Modules

Detailed
Dimensions

35

L
7.6
Model
DIN-35-70
DIN-35-105
DIN-35-140

Length
70 mm
105 mm
140 mm

Hole center spacing in mm: 35.1
Hole size in mm: 25.4 x 5.3

Two-bracket kit contains a replacement for the brackets that come with the emitter/receiver and includes mounting hardware.
Bracket is made of cold-rolled steel with a black corrosion-resistant zinc chromate finish.

EZA-MBK-1

Dimensions
B

Used With

C

Heavy-Duty MINI-SCREEN
Flanges Out
Flanges In

EZ-SCREEN Point & Grid
Flanges Out
Flanges In

A

Detailed
Dimensions

60

25
CABLES &
WIRING
BRACKETS

PICO-GUARD Grid
Flanges Out
Flanges Out

74.2

CORNER
MIRRORS
STANDS

Hole center spacing in mm: A to B = 15.8, A to C = 31.5
Hole size in mm: 15.0 x 7.0

HARSH DUTY
SOLUTIONS

Kit contains two end-cap brackets to replace the brackets that come with the emitter/receiver and includes mounting hardware.
Brackets are made of cold-rolled steel with a black corrosion-resistant zinc chromate finish.

EZA-MBK-11

Dimensions

ACCESSORIES

REPLACEMENT
PARTS

Used With

B

EZ-SCREEN 14 & 30 mm Resolution

A

Detailed
Dimensions

Flanges Out
50

25

63.2

Hole center spacing in mm: A to B = 20
Hole size in mm: 15.0 x 7.0
NOTE: All dimensions in millimeters unless otherwise stated.

192

More information online at

bannerengineering.com

Flanges In

ACCESSORIES
Brackets
Kit contains two-piece center bracket to replace the support bracket that comes with the emitter/receiver and includes mounting
hardware. Bracket is made of cold-rolled steel with a black corrosion-resistant zinc chromate finish.

EZA-MBK-12

Dimensions

Used With
EZ-SCREEN 14 & 30 mm Resolution

Detailed
Dimensions

A
50

55.6

ø 60
55
40
B

Hole center spacing in mm: A to A = 20, A to B = 37.4
Hole size in mm: A = ø 7.0, B = ø 8.3

EZA-MBK-2

Kit contains two adapter brackets for attaching the standard EZA-MBK-1 bracket (included with the sensor) to any MSA series stand.

Dimensions

Detailed
Dimensions

Used With
EZ-SCREEN 14 & 30 mm Resolution
Flanges Out
Flanges In

88.9

Heavy-Duty MINI-SCREEN
Flanges Out
Flanges In

12.7
CABLES &
WIRING

73.6

PICO-GUARD Grid
Flanges Out
Flanges In

A

MSA Stands
BRACKETS

B
B

CORNER
MIRRORS

A
Hole center spacing in mm: A to A = 63.9, B to B = 19.9,
A to B = 22
Hole size in mm: A = ø 8.3, B = ø 4.78

STANDS
HARSH DUTY
SOLUTIONS

Universal adapter bracket attaches emitters and receivers to engineered/slotted aluminum framing such as 80/20 ™ and Unistrut™.
It retrofits the MINI-SCREEN, MICRO-SCREEN and MACHINE-GUARD.

EZA-MBK-20

Detailed
Dimensions

Used With
A

50.0

ACCESSORIES

Dimensions

EZ-SCREEN 14 & 30 mm Resolution
Flanges Out

Flanges In

B
C

39.2

58.2

Hole center spacing in mm: A to A = 44.4, B to B = 20.0,
C to C = 40.0
Hole size in mm: A = 10.2 x 5.4, B = 27.6 x 7.0, C = 25.0 x 7.0
NOTE: All dimensions in millimeters unless otherwise stated.

More information online at

bannerengineering.com

REPLACEMENT
PARTS

193

ACCESSORIES
Brackets
Kit contains four brackets for one side of an L-mounting, allowing four mounting variations. Inclined installations of 0° to 30° or
0° to 45° are possible. Use for mounting cascading light screens at right angles (L-configuration).

EZA-MBK-21

Dimensions

Used With

A

EZ-SCREEN 14 & 30 mm Resolution

Detailed
Dimensions

133.9
B

98.2
Hole center spacing in mm: A to A , B to B = 20;
A to B = 101.4
Hole size in mm: A = ø 7.3, B = 30.0 x 7.3

Side-swivel bracket kit contains a two-part bracket and hardware. Bracket is made of cold-rolled steel with a black corrosionresistant zinc chromate finish. Use one kit for the EZ-SCREEN Point and two for the EZ-SCREEN and PICO-GUARD Grid or
MINI-SCREEN.

EZA-MBK-3

Dimensions

Used With
EZ-SCREEN Point & Grid

25

Heavy-Duty MINI-SCREEN PICO-GUARD Grid

Detailed
Dimensions

A

100

CABLES &
WIRING

109.4
100
B

BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

Top-mounting swivel bracket kit allows the sensor to tilt up to 45° in any direction and is made of black reinforced thermoplastic
polyester. Kit includes a model SMB30SC swivel bracket and a threaded adapter plate.

EZA-MBK-4

Dimensions

ACCESSORIES

REPLACEMENT
PARTS

Hole center spacing in mm: A to B = 65
Hole size in mm: ø 7.0
Range of rotation: 180°

Used With
EZ-SCREEN Point

Detailed
Dimensions

58.7
29

66.5
A

B

Hole center spacing in mm: A to B = 50.8
Hole size in mm: ø 7.0
NOTE: All dimensions in millimeters unless otherwise stated.

194

More information online at

bannerengineering.com

ACCESSORIES
Brackets
Bottom-mounting swivel bracket kit allows the sensor to tilt up to 45° in any direction and is made of black reinforced thermoplastic
polyester. Kit includes a model SMB30SC swivel bracket and a threaded adapter.

EZA-MBK-5

Dimensions

Used With
EZ-SCREEN Point

Detailed
Dimensions

58.7
29

66.5
A

B

Hole center spacing in mm: A to B = 50.8
Hole size in mm: ø 7.0

Slots in two-bracket kit provide 30 mm range for sensors. Brackets are made of cold-rolled steel with a black corrosion-resistant
zinc chromate finish.

EZA-MBK-9

Dimensions

Used With
Heavy-Duty MINI-SCREEN
Flanges Out
Flanges In

EZ-SCREEN Grid
Flanges Out
Flanges In

60
Detailed
Dimensions

B
A

35.1

CABLES &
WIRING

51.5

PICO-GUARD Grid
Flanges Out
Flanges In

BRACKETS

84

CORNER
MIRRORS
STANDS

Hole center spacing in mm: A to B = 30.8
Hole size in mm: 21.0 x 7.0

HARSH DUTY
SOLUTIONS

Kit contains two replacement brackets that come with MSA Series stands and includes mounting hardware. Brackets are made of
cold-rolled steel with a black corrosion-resistant zinc chromate finish.

MSAMB

Used With

ACCESSORIES

Dimensions

MINI-SCREEN
Detailed
Dimensions

28.4

45.2
57.2

Hole center spacing in mm:
to
= 28.5
= ø 5.3,
Hole size in mm:

to

= 20,

to

= 44.3,

= ø 3.9

NOTE: All dimensions in millimeters unless otherwise stated.

More information online at

bannerengineering.com

REPLACEMENT
PARTS

195

ACCESSORIES
Brackets
Two-bracket kit anchors top and bottom of sensor; bottom bracket allows connection of QD cable. Brackets are made of cold-rolled
steel with a black corrosion-resistant zinc chromate finish.

MSMB-1

Dimensions

Used With
MINI-SCREEN
Top View
Bottom View
Flanges Out
Flanges In
Flanges Out
Flanges In

38.1
Detailed
Dimensions

20.8
A

53.9

B

Hole center spacing in mm: A to A , B to B = 25.4
Hole size in mm: A 5.1 x 4.8, B ø 6.8

Low-profile two-bracket kit anchors top and bottom of sensor with vibration mounts (MSVM...); bottom bracket allows connection
of QD cable. Brackets are made of 11-gauge cold-rolled steel with a black corrosion-resistant zinc chromate finish.

MSMB-2

Dimensions

Used With

A

MINI-SCREEN

Detailed
Dimensions

Top View

Bottom View

17.8
71.4

15.2
CABLES &
WIRING
BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

Hole center spacing in mm: A to A & B to B = 60.9
Hole size in mm: 10.0 x 4.8

Two-bracket kit contains a replacement for the brackets that come with the emitter/receiver. Brackets are made of 11-gauge coldrolled steel with a black corrosion-resistant zinc chromate finish and four self-locking nuts.

MSMB-3

Dimensions

ACCESSORIES

REPLACEMENT
PARTS

B

Used With

57.3

MINI-SCREEN
Top View
Bottom View
Flanges Out
Flanges In
Flanges Out
Flanges In

Detailed
Dimensions

A

24.2

53.4

B
Hole center spacing in mm: A to A & B to B = 44.5
Hole size in mm: 10.2 x 4.8
NOTE: All dimensions in millimeters unless otherwise stated.

196

More information online at

bannerengineering.com

ACCESSORIES
Brackets

MSMB-MSM-45

Bracket is a replacement for the bracket that comes with the mirror. Mounting hardware in included.

Dimensions

Used With
MSM4A Mirrors

B
Detailed
Dimensions

A
136.5

192.8
76.3

Hole center spacing in mm: A to B = 50.8
Hole size in mm: A = ø 7.0, B = 87.7 x 7.0

Note: For kit containing a bracket and MSM4A mirror, order model number MSA-MBM-K45.

Two-bracket kit contains a replacement for brackets that come with the MSM mirrors and includes mounting hardware. Brackets are
made of cold-rolled steel with a black corrosion-resistant zinc chromate finish.

MSMMB

Dimensions

Used With
MSM Mirrors

Detailed
Dimensions

Flanges Out

57.2

Flanges In

B

A

21.5
CABLES &
WIRING

53.5

BRACKETS
CORNER
MIRRORS
STANDS

Hole center spacing in mm: A to B = 45.0
Hole size in mm: 10.0 x 4.7

MSVM..

HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

Rubber spacer reduces vibration when installed between the mounting surface and a bracket. Packet contains two spacers.

Used With

ACCESSORIES

Dimensions

MINI-SCREEN
Detailed
Dimensions

13.8

30.7

MSVM-1 = for one emitter/receiver pair with 4 mm hardware (Qty 4).
MSVM10-8 = for two emitter/receiver pairs with 10-32" hardware (Qty 8).
NOTE: All dimensions in millimeters unless otherwise stated.

More information online at

bannerengineering.com

197

ACCESSORIES
Brackets
Optional retrofit bracket is designed to replace SI-MAG1.. Magnetic Interlock switches with PICO-GUARD switches. It is made of
black reinforced thermoplastic polyester.

SFA-IMB1

Dimensions

Used With
PICO-GUARD Switches

24.9
Detailed
Dimensions

B
A

88.9

A
B

Hole center spacing in mm: A to A , B to B = 78; A to B = 10.0
Hole size in mm: A = ø 4.3, B = 8.0 x 4.3

Optional retrofit bracket is designed to replace SI-MAG2.. Magnetic Interlock switches with PICO-GUARD switches. It is made of
black reinforced thermoplastic polyester.

SFA-IMB2

Dimensions

Used With
PICO-GUARD Switches

Detailed
Dimensions

26.8
A
42.8

CABLES &
WIRING

B
BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

Kit contains two replacement brackets for one SSM Series mirror and mounting hardware. Brackets are made of cold-rolled steel
with a black corrosion-resistant zinc chromate finish.

SMA-MBK-1

Dimensions

ACCESSORIES

REPLACEMENT
PARTS

Hole center spacing in mm: A to B = 21.3
Hole size in mm: ø 4.3

Used With

A
Detailed
Dimensions

SSM Mirrors
60

Flanges Out
B

60

101.2

Hole center spacing in mm: A to A = 31.5, A to B = 15.7
Hole size in mm: 15.0 x 7.0
NOTE: All dimensions in millimeters unless otherwise stated.

198

More information online at

bannerengineering.com

Flanges In

ACCESSORIES
Brackets

SMB12MM

Twelve-gauge stainless-steel mounting bracket accommodates a 12 mm barrel-style sensor and allows ± 15° of lateral movement.

Dimensions

Used With

25.4

Detailed
Dimensions

PICO-GUARD 12 mm Switches

PICO-GUARD 12 mm Points

38.1
B
A
42.9

Hole center spacing in mm: A to B = 40
Hole size in mm: A = ø 6.3, B = 13.1 x 6.3

Swivel bracket of black reinforced thermoplastic polyester accommodates a 12 mm barrel-style sensor and allows the sensor to tilt
up to 45° in any direction. Stainless steel locking hardware is included.

SMB1812SF

Dimensions

Used With
PICO-GUARD 12 mm Points

Detailed
Dimensions

43.2

43.2

CABLES &
WIRING
BRACKETS

B

CORNER
MIRRORS

A

25.4

STANDS

Hole center spacing in mm: A to B = 36.1
Hole size in mm: ø 5.0

SMB30A

HARSH DUTY
SOLUTIONS

Twelve-gauge stainless-steel mounting bracket accommodates 30 mm barrel-style sensor and allows ± 15° of lateral movement.

Used With

STB/OTB

45

Detailed
Dimensions

ACCESSORIES

Dimensions

PICO-GUARD 30 mm Points

48
B

A
48

Hole center spacing in mm: A to B = 40
Hole size in mm: A = ø 6.3, B = 27.3 x 6.3
NOTE: All dimensions in millimeters unless otherwise stated.

More information online at

bannerengineering.com

REPLACEMENT
PARTS

199

ACCESSORIES
Brackets
Twelve-gauge stainless-steel mounting bracket accommodates 30 mm barrel-style sensor and allows up to 90° of lateral movement,
depending on spacing of mounting screws.

SMB30MM

Dimensions

Detailed
Dimensions

Used With

STB/OTB

69.9

PICO-GUARD 30 mm Points

57.2

57.2
B
A

Hole center spacing in mm: A to A = 51.0, A to B = 25.4
Hole size in mm: A = 42.6 x 7.0, B = ø 6.3

Swivel bracket of black reinforced thermoplastic polyester accommodates a 30 mm barrel-style sensor and allows the sensor to tilt
up to 45° in any direction. Stainless steel locking hardware is included.

SMB30SC

Dimensions

Used With

66.5

Detailed
Dimensions

STB/OTB

PICO-GUARD 30 mm Points

58.7
CABLES &
WIRING
BRACKETS

B

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

A

Hole center spacing in mm: A to B = 50.8
Hole size in mm: ø 7.0

Twelve-gauge stainless-steel mounting bracket allows more than 90° of rotation. Use for mounting a 30 mm sensor on the edge of a
surface.

SMBAMS30P

Dimensions

ACCESSORIES

REPLACEMENT
PARTS

29.2

Used With
STB/OTB

45
Detailed
Dimensions

85

B
A

Hole center spacing in mm: A to A = 26.0, A to B = 13.0
Hole size in mm: A = 26.8 x 7.0, B = ø 6.3
NOTE: All dimensions in millimeters unless otherwise stated.

200

More information online at

bannerengineering.com

PICO-GUARD 30 mm Points

ACCESSORIES
Brackets
Twelve-gauge stainless-steel right-angle mounting bracket accommodates a 30 mm sensor with QD and allows more than 90° of
rotation.

SMBAMS30RA

Dimensions

Used With

STB/OTB

Detailed
Dimensions

PICO-GUARD 30 mm Points

A
48

B

48

45

Hole center spacing in mm: A to A = 25.3, A to B = 12.8
Hole size in mm: A = 26.8 x 7.0, B = ø 6.3

The four holes in this twelve-gauge stainless-steel right-angle base bracket fit the slots in SMBAMS Series brackets. For additional
articulation, combine multiple SMBAMS.. brackets.

SMBAMSBRA

Dimensions

Used With
SMBAMS30P Bracket

Detailed
Dimensions

SMBAMS30RA Bracket

A
B

48

CABLES &
WIRING
BRACKETS

48

45

CORNER
MIRRORS
STANDS

Hole center spacing in mm: A to A = 25.3, A to B = 12.8
Hole size in mm: A = 26.8 x 7.0, B = ø 6.3

HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

Flat-mounting bracket is a replacement for the bracket that comes with a remote display and is made of black reinforced
thermoplastic polyester.

SMBR55F01

Used With

ACCESSORIES

Dimensions
A

PICO-GUARD SFA-RD Remote Display

Detailed
Dimensions

64

B

65

C

Hole center spacing in mm: A to A , B to B , C to C = 50.8;
A to B , B to C = 25.3
Hole size in mm: A , C = ø 5.6, B = 11.3 x 5.6
NOTE: All dimensions in millimeters unless otherwise stated.

More information online at

bannerengineering.com

201

ACCESSORIES
Brackets

SMBR55F02

Bracket mounts to T-slotted or narrow flat surfaces and is made of 19-gauge stainless steel.

Dimensions

Used With
PICO-GUARD SFA-RD Remote Display

Detailed
Dimensions

30
10.7
B

34.8
72.9
A

Hole center spacing in mm: A to B = 50.3
Hole size in mm: 11.2 x 5.6

SMBR55FRA

Bracket attaches to the side of the sensor and is made from 19-gauge stainless steel.

Dimensions

Used With
PICO-GUARD SFA-RD Remote Display

Detailed
Dimensions

44

40
CABLES &
WIRING

B

BRACKETS

A

20

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

Bracket replaces center bracket and is made of cold-rolled steel with a black corrosion-resistant zinc chromate finish. Mounting
hardware is included. USCMB-1 fits emitters and receivers up to 900 mm long, and the two-bracket USCMB-2 fits emitters and
receivers more than 900 mm long.

USCMB-..

Dimensions

ACCESSORIES

REPLACEMENT
PARTS

Hole center spacing in mm: A to B = 20
Hole size in mm: ø 5.4

Used With

31.8

MICRO-SCREEN

A

Detailed
Dimensions

B

111.3

37.6

28.4

Hole center spacing in mm: A to A = 19.9, A to B = 10.0
Hole size in mm: A = 12.2 x 7.11, B = ø 4.8
NOTE: All dimensions in millimeters unless otherwise stated.

202

More information online at

bannerengineering.com

EZ-SCREEN Type 2

ACCESSORIES
Brackets
Two-bracket kit contains a replacement for the brackets that come with the emitter/receiver. Brackets are made of cold-rolled steel
with a black corrosion-resistant zinc chromate finish.

USMB-1

Dimensions

Used With
MICRO-SCREEN

Detailed
Dimensions

Flanges Out

31.7

EZ-SCREEN Type 2

Flanges In

Flanges Out

Flanges In

B

A
26.9

41.5

Hole center spacing in mm: A to A = 20.0, A to B = 10.0
Hole size in mm: A = ø 4.7, B =12.7 x 7.0

Universal-mounting surface kit contains two brackets made of cold-rolled 13-gauge steel with a black corrosion-resistant zinc
chromate finish. Use one per emitter or receiver.

USMB-6

Dimensions
A
Detailed
Dimensions

Used With
MICRO-SCREEN

EZ-SCREEN Type 2

B

Flanges Out

Flanges In

Flanges Out

Flanges In

69.0

C
CABLES &
WIRING

41.9

BRACKETS

40.3

CORNER
MIRRORS

Hole center spacing in mm: A to A = 52.1, A to B = 26,
C to C = 30.6
Hole size in mm: A , B = 25.4 x 7.1, C = 15.5 x 7.0

STANDS
HARSH DUTY
SOLUTIONS

Low-profile bracket is made of black anodized aluminum and allows ± 30° of movement. Use one per emitter or receiver. Bracket
does not include two 2 x M4 screws required for through-hole mounting.

USMB-8

Used With
MICRO-SCREEN

Detailed
Dimensions

A

ACCESSORIES

Dimensions

EZ-SCREEN Type 2

B

8.0

32.8

31.8

Hole center spacing in mm: A to B = 22.7
Hole size in mm: 15.0 x 3.5
NOTE: All dimensions in millimeters unless otherwise stated.

More information online at

bannerengineering.com

REPLACEMENT
PARTS

203

ACCESSORIES
Corner Mirrors

Corner Mirrors
for Guarding Applications
• Mirrors expand guarding to mutiple sides of an area
using one emitter/receiver pair.
• Glass or stainless steel models are available.
• Mirrors mount easily to MSA Series stands or other
surfaces, using included brackets and hardware.
• Unique end-cap design allows mirrors to rotate to
± 45° after installation.

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS

LAT-1 Laser Alignment Tool

STANDS
HARSH DUTY
SOLUTIONS

• Totally self-contained visible-beam laser
tool simplifies the critical mechanical and
optical alignment of emitters, receivers and
mirrors.

ACCESSORIES

REPLACEMENT
PARTS

• Use to align emitter/receiver pairs,
especially in applications that include long
distances or corner mirrors.

BRACKETS

PAGE 197
34!.$3

PAGE
209

204

MSM Glass Models. . . . . . . . . . . . . . . . . . . . . . . . . . Page 205
SSM Stainless Steel Models . . . . . . . . . . . . . . . . . . . . . . . .206
Alignment Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

More information online at

bannerengineering.com

ACCESSORIES
Corner Mirrors

MSM Corner Mirrors
Compact for light-duty applications
Detailed
Dimensions

Available in 12 lengths
Decreases range by 8%
Rated 85% efficiency
Y

L1

L2

72.9 mm

MSM Corner Mirrors
(shown with standard brackets and MSAMB** adapter
bracket mounted on MSA stand)

MSM Corner Mirrors
Mirror
Models

Download
PDF

Reflective Area
(Y)

Mounting
Height (L1)

Mirror
Height (L2)*

Data
Sheet

MSM4A

165 mm

221 mm

191 mm

MSM8A

267 mm

323 mm

292 mm

MSM12A

356 mm

411 mm

381 mm

CABLES &
WIRING

MSM16A

457 mm

513 mm

483 mm

BRACKETS

MSM20A

559 mm

615 mm

584 mm

MSM24A

CORNER
MIRRORS

660 mm

716 mm

686 mm

MSM28A

762 mm

818 mm

787 mm

MSM32A

864 mm

919 mm

889 mm

MSM36A

965 mm

1021 mm

991 mm

MSM40A

1067 mm

1123 mm

1092 mm

MSM44A

1168 mm

1224 mm

1194 mm

MSM48A

1270 mm

1326 mm

1295 mm

43685

STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

ACCESSORIES

* The mounting brackets may be inverted from the positions shown (flanges pointing “inward”
instead of “outward,” as shown). When this is done, dimension L2 decreases by 66 mm.
** MSAMB adapter bracket kit included with each MSA stand.

More information online at

bannerengineering.com

205

ACCESSORIES
Corner Mirrors

SSM Corner Mirrors
Robust for heavy-duty applications
Detailed
Dimensions

Extra wide for use with long-range
optical safety systems
Available in stainless steel for
harsh applications
Available in 20 lengths

L1

Y

L2

Rated 85% efficiency for SSM
models and 50% on SSM-S
models
Decreases range by 8% for SSM
models and 30% for SSM-S
models
115.0 mm

SSM and SSM-S Corner Mirrors
(shown with standard brackets and EZA-MBK-2** adapter
bracket mounted on MSA stand)

SSM Glass Corner Mirrors
Mirror
Models

Reflective Area
(Y)

Mounting
Height (L1)

Download
PDF

Mirror
Height (L2)*

SSM-100

100 mm

211 mm

178 mm

SSM-150

150 mm

261 mm

228 mm

SSM-200

200 mm

311 mm

278 mm

BRACKETS

SSM-250

250 mm

361 mm

328 mm

CORNER
MIRRORS

SSM-375

375 mm

486 mm

453 mm

SSM-475

475 mm

586 mm

553 mm

SSM-550

550 mm

661 mm

628 mm

SSM-675

675 mm

786 mm

753 mm

SSM-825

825 mm

936 mm

903 mm

SSM-875

875 mm

986 mm

953 mm

SSM-975

975 mm

1086 mm

1053 mm

SSM-1100

1100 mm

1211 mm

1178 mm

SSM-1175

1175 mm

1286 mm

1253 mm

SSM-1275

1275 mm

1386 mm

1353 mm

SSM-1400

1400 mm

1511 mm

1478 mm

SSM-1475

1475 mm

1586 mm

1553 mm

SSM-1550

1550 mm

1661 mm

1628 mm

SSM-1675

1675 mm

1786 mm

1753 mm

SSM-1750

1750 mm

1861 mm

1828 mm

SSM-1900

1900 mm

2011 mm

1978 mm

CABLES &
WIRING

STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

Data
Sheet

61934

*

The mounting brackets may be inverted from the positions shown (flanges pointing “inward”
instead of “outward,” as shown). When this is done, dimension L2 decreases by 66 mm.
** One EZA-MBK-2 adapter bracket kit required if used with a MSA stand.
NOTE: The total range decreases by approximately 8% per mirror.

206

More information online at

bannerengineering.com

ACCESSORIES
Corner Mirrors

SSM-S Stainless Steel Corner Mirrors
Mirror Model

Reflective Area
(Y)

Mounting
Height (L1)

Download
PDF

Mirror
Height (L2)*

SSM-100-S

100 mm

211 mm

178 mm

SSM-150-S

150 mm

261 mm

228 mm

SSM-200-S

200 mm

311 mm

278 mm

SSM-250-S

250 mm

361 mm

328 mm

SSM-375-S

375 mm

486 mm

453 mm

SSM-475-S

475 mm

586 mm

553 mm

SSM-550-S

550 mm

661 mm

628 mm

SSM-675-S

675 mm

786 mm

753 mm

SSM-825-S

825 mm

936 mm

903 mm

SSM-875-S

875 mm

986 mm

953 mm

SSM-975-S

975 mm

1086 mm

1053 mm

SSM-1100-S

1100 mm

1211 mm

1178 mm

SSM-1175-S

1175 mm

1286 mm

1253 mm

SSM-1275-S

1275 mm

1386 mm

1353 mm

SSM-1400-S

1400 mm

1511 mm

1478 mm

SSM-1475-S

1475 mm

1586 mm

1553 mm

SSM-1550-S

1550 mm

1661 mm

1628 mm

SSM-1675-S

1675 mm

1786 mm

1753 mm

SSM-1750-S

1750 mm

1861 mm

1828 mm

SSM-1900-S

1900 mm

2011 mm

1978 mm

Data
Sheet

67200

CABLES &
WIRING
BRACKETS

* The mounting brackets may be inverted from the positions shown (flanges pointing “inward”
instead of “outward,” as shown). When this is done, dimension L2 decreases by 58 mm.
** One EZA-MBK-2 adapter bracket kit required if used with a MSA stand.
NOTE: The total range decreases by approximately 30% per mirror.

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

ACCESSORIES

More information online at

bannerengineering.com

207

ACCESSORIES
Corner Mirrors

Laser Alignment Tools
Simplifies the alignment of any
emitter/receiver pair

75 mm

Detailed
Dimensions

Available for EZ-SCREEN,
PICO-GUARD, MICRO-SCREEN and
MINI-SCREEN
LASER LIGHT

Includes a built-in bubble level

LAT - 1

DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.

75 mm

Peak Power: 2.8mW, 640-660nm
33kHz 25% duty cycle
COMPLIES WITH 21 CFR PART
1040.10 AND EN60825-1; 1994

Uses one 9-volt battery, which is
included

AVOID EXPOSURE - LASER LIGHT
EMITTED FROM THIS APERTURE

REQUIRES ONE 9V BATTERY
REMOVE TWO PHILLIPS SCREWS FOR BATTERY ACCESS BELOW

21 mm

LAT-1 Laser Alignment Tool
(shown without clip)

LAT-1 Laser Alignment Tools

Download
PDF

LAT-1
with Clip Kit

Safety Light Screen Housing
MINI-SCREEN ®

LAT-1-MS

MSA-LAT-1

LAT-1-US

USA-LAT-1

Heavy-Duty MINI-SCREEN , EZ-SCREEN Grid or Points, PICO-GUARD Grids

LAT-1-HD

EZA-LAT-1

MICRO-SCREEN

®
®

CABLES &
WIRING

Clip
w/Target

®

™

EZ-SCREEN 14 & 30 mm Resolution

LAT-1-SS

EZA-LAT-2

BRACKETS

EZ-SCREEN Type 2

LAT-1-LS

LSA-LAT-1

CORNER
MIRRORS

All of the Above

LAT-1

–

PICO-GUARD ® SFP12 Safety Points

LAT-1-SFP12

SFA-LAT-12

PICO-GUARD ® SFP30 Safety Points

LAT-1-SFP30

SFA-LAT-30

®
®

STANDS

Data
Sheet

54599

HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

ACCESSORIES

LAT-1 Laser Alignment Tool Specifications

208

Supply Voltage and Current

One standard 9V battery, included (replaceable); approximately 20 hours of continuous operation

Sensing Beam

Class 2 laser, 640-660 nm visible red IEC
Pulse Width: 7 microseconds
Rep rate: 30 microseconds
Peak output power: 2.8 mW, 33kHz, 25% duty cycle

Beam Size at Aperture

Approximately 2 mm diameter

Beam Divergence

± 1.0 milliradian within specified temperature range
± 0.5 milliradians at room temperature

Beam Placement

Within ± 4 milliradians (approximately ±0.25 degrees) of parallel to front, back, top and bottom of
housing

Construction

Aluminum housing; black anodized finish
Black polypropylene cover with flexible hinge for battery access

Environmental Rating

NEMA 1; IEC IP50

Operating Conditions

Temperature: 0° to +40° C

Laser Classification

U.S. Safety Standards 21 CFR 1040.10
European Standards EN 60825-1:1994

More information online at

bannerengineering.com

Relative humidity: 90% @ +50° C (non-condensing)

ACCESSORIES
Stands

Stands
For Optical Safety
System Sensors or
Corner Mirrors
• Free-standing supports for Banner optical safety
system emitters, receivers, and corner mirrors.
• Strong and lightweight, the stand’s square poles
have dual channels to make it easy to adjust height
accurately.
• The stand base is welded steel for maximum stability.

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS

Protective Mounting Stands

STANDS

• Each stand shields two adjacent sides of an emitter or
receiver; combine two stands to surround the entire
sensor.

HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

ACCESSORIES

• Stand protects the sensor from impact and deflects
flying material such as weld splatter.

MSA Stand shown with MSM corner mirror
(sold on page 205).

USA Protective Mounting Stands come with
mounting base

MSA Stands . . . . . . . . . . . . . . . . . . . . . . . Page 210
USA Protective Mounting Stands . . . . . . . . . . . . 211
MSA Protective Mounting Stands. . . . . . . . . . . . 211
More information online at

bannerengineering.com

BRACKETS

PAGE 193

209

ACCESSORIES
Stands
40.0 mm

MSA Stands

40.0 mm

Supports emitter, receiver or
corner mirror.

Detailed
Dimensions

Available without stand base, for
attaching to a surface.
Available in four heights.
Assembles easily.
L

Includes mounting hardware.
Accepts attachment of USA Series
protective mounting stands.

127.0 mm

MSA Stand

MSA Series Stands

CABLES &
WIRING

Model*

BRACKETS

Download
PDF

Used With**

MSA-S24-1

CORNER
MIRRORS

MSA-S42-1

STANDS

MSA-S66-1

HARSH DUTY
SOLUTIONS

MSA-S84-1

REPLACEMENT
PARTS

EZ-SCREEN , MICRO-SCREEN ,
MINI-SCREEN ® and
Mirrors.
®

®

Stand
Height (L)

Useable Stand
Height

610 mm

483 mm

1067 mm

940 mm

1676 mm

1549 mm

2132 mm

2006 mm

Data
Sheet

43687

SPKA-AG12-1

SFP12 Safety Points

1067 mm

940 mm

SPKA-AG30-1

SFP30 Safety Points

1067 mm

940 mm

ACCESSORIES

* Available without a base by adding suffix “NB” to model number (example, MSA-S24-1NB).
** Adapter brackets EZA-MBK-2 (2 each) are required for mounting EZ-SCREEN Grid and Point emitters/receivers, or SSM Series
mirrors.

210

More information online at

bannerengineering.com

ACCESSORIES
Stands

Protective Mounting Stands
Mounts easily to wall, post, or
machine frame.
Available for MINI-SCREEN and
MICRO-SCREEN

Detailed
Dimensions
51.0 mm

89.0 mm
104.6 mm

66.5 mm

Available in five heights

L

USA Protective Mounting Stand

L

CABLES &
WIRING

MSA Protective Mounting Stand

BRACKETS
CORNER
MIRRORS

USA Series Protective Mounting Stands

Download
PDF

STANDS

Used With*
Model*
USA-PMS-40

Model Family

Emitter/Receiver Defined Area

Mounting Stand
Height (L)

MICRO-SCREEN ®

102 to 914 mm

1016 mm

HARSH DUTY
SOLUTIONS

Data
Sheet

REPLACEMENT
PARTS

57119
USA-PMS-62

102 to 1422 mm

1651 mm

ACCESSORIES

*

MICRO-SCREEN ®

USA Series stands are compatible with MINI-SCREEN emitters/receivers using special brackets (see data sheet).

MSA Series Protective Mounting Stands

Download
PDF

Used With
Model*

Model Family

MSA-PMS-30
MSA-PMS-42

MINI-SCREEN ®

MSA-PMS-54

Emitter/Receiver Defined Area

Mounting Stand
Height (L)

305 to 610 mm

760 mm

711 to 914 mm

1067 mm

1016 to 1219 mm

1372 mm

Data
Sheet

64715

* Order base model MSA-SB-1 separately.
NOTE: Mounting hardware ordered separately.

More information online at

bannerengineering.com

211

ACCESSORIES
Explosive & Harsh Duty Solutions

Harsh Duty
Lens Shields and
Enclosures
• Replaceable lens shields protect sensor lenses from
damage.
• Tubular enclosures guard entire sensor in
washdown environments.
• Protective enclosures provide rugged
protection for sensors and mirrors.
• Explosion-proof enclosures protect sensors
in environments with flammable gases,
liquids or dust.

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS

Lens Shields

STANDS

• Covers the lens of an emitter or
receiver to prevent
damage.

HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

EZ-SCREEN Lens Shields . . . . . . . . . . . . . . . . . . . . . Page 213
MICRO-SCREEN Lens Shields . . . . . . . . . . . . . . . . . . . . . 214
MINI-SCREEN Lens Shields . . . . . . . . . . . . . . . . . . . . . . . 214
Heavy-Duty MINI-SCREEN Lens Shields . . . . . . . . . . . . . . 215
EZ-SCREEN Type 2 Lens Shields . . . . . . . . . . . . . . . . . . . . 215
EZA-TE Tubular Enclosures. . . . . . . . . . . . . . . . . . . . . . . . . 216
MSA-TE Tubular Enclosures . . . . . . . . . . . . . . . . . . . . . . . 217
MSHDA-TE Tubular Enclosures . . . . . . . . . . . . . . . . . . . . 217
EZA-S Protective Enclosures . . . . . . . . . . . . . . . . . . . . . . . 218
Explosion-Proof Enclosures . . . . . . . . . . . . . . . . . . . . . . . . 219

212

More information online at

bannerengineering.com

• Available for
all sizes of EZ-SCREEN,
MICRO-SCREEN, MINISCREEN emitters and
receivers.

ACCESSORIES
Explosive & Harsh Duty Solutions

Lens Shields
Made of thin, strong polycarbonate
Detailed
Dimensions

Attaches easily to sensor with an
adhesive-backed neoprene foam
gasket
Reduces range by approximately
10% per shield (20% per pair)
L

Lens Shield

EZ-SCREEN® Lens Shields

Download
PDF

Used With
Model
EZS-149

Model Family

Emitter/
Receiver Model

Emitter/Receiver
Defined Area

Emitter/Receiver
Protected Height

Lens Shield
Length (L)

EZ-SCREEN Point

SP..1

—

—

149 mm

EZS-684

SG..2-500

500 mm

684 mm

EZS-768

SG..2-584

584 mm

768 mm

800 mm

984 mm

EZS-984

EZ-SCREEN Grid

SG..3-400

—

SG..3-533

900 mm

1251 mm

EZS-1084

SG..4-300

1066 mm

1084 mm

EZS-150

SLS..150

150 mm

258 mm

EZS-300

SLS..300

300 mm

368 mm

EZS-450

SLS..450

450 mm

518 mm

EZS-600

SLS..600

600 mm

667 mm

EZS-750

SLS..750

750 mm

817 mm

SLS..900

900 mm

967 mm

SLS..1050

1050 mm

1116 mm

EZS-1200

SLS..1200

1200 mm

1266 mm

EZS-1350

SLS..1350

1350 mm

1416 mm

EZS-1500

SLS..1500

1500 mm

1565 mm

EZS-1650

SLS..1650

1650 mm

1715 mm

EZS-1800

SLS..1800

1800 mm

1865 mm

BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

ACCESSORIES

EZS-1251

CABLES &
WIRING

Data
Sheet

61960

EZS-900
EZS-1050

EZ-SCREEN
14 & 30 mm
Resolution

NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%.

More information online at

bannerengineering.com

213

ACCESSORIES
Explosive & Harsh Duty Solutions

MICRO-SCREEN® Lens Shields

Download
PDF

Used With
Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Lens Shield
Length (L)

USS4

USE4../USR4..

102 mm

112 mm

USS8

USE8../USR8..

203 mm

214 mm

USS12

USE12../USR12..

305 mm

315 mm

USS16

USE16../USR16..

406 mm

417 mm

USS20

USE20../USR20..

508 mm

519 mm

USS24

USE24../USR24..

610 mm

620 mm

USS28

USE28../USR28..

711 mm

722 mm

USS32

USE32../USR32..

813 mm

823 mm

USS36

USE36../USR36..

914 mm

925 mm

USS40

USE40../USR40..

1016 mm

1027 mm

USS44

USE44../USR44..

1118 mm

1128 mm

USS48

USE48../USR48..

1219 mm

1230 mm

USS56

US56../USR56..

1422 mm

1433 mm

USS64

USE64../USR64..

1626 mm

1636 mm

USS72

USE72../USR72..

1829 mm

1829 mm

Model

Data
Sheet

55131

NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%.

CABLES &
WIRING

MINI-SCREEN® Lens Shields

BRACKETS

Download
PDF

Used With

CORNER
MIRRORS

Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Lens Shield
Length (L)

MSS4

MS(XL)E4../MS(XL)R4..

114 mm

138 mm

MSS8

MS(XL)E8../MS(XL)R8..

215 mm

239 mm

MSS12

MS(XL)E12../MS(XL)R12..

305 mm

341 mm

MSS16

MS(XL)E16../MS(XL)R16..

406 mm

442 mm

MSS20

MS(XL)E20../MS(XL)R20..

508 mm

544 mm

MSS24

MS(XL)E24../MS(XL)R24..

610 mm

643 mm

MSS28

MS(XL)E28../MS(XL)R28..

711 mm

745 mm

MSS32

MS(XL)E32../MS(XL)R32..

813 mm

846 mm

MSS36

MS(XL)E36../MS(XL)R36..

914 mm

948 mm

MSS40

MS(XL)E40../MS(XL)R40..

1016 mm

1050 mm

MSS44

MS(XL)E44../MS(XL)R44..

1118 mm

1151mm

MSS48

MS(XL)E48../MS(XL)R48..

1219 mm

1253 mm

Model

STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

Data
Sheet

44418

NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%.

214

More information online at

bannerengineering.com

ACCESSORIES
Explosive & Harsh Duty Solutions

Heavy-Duty MINI-SCREEN® Lens Shields

Download
PDF

Used With
Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Lens Shield
Length (L)

MSHDS24

MSXLHDE24../MSXLHDR24..

610 mm

661 mm

MSHDS32

MSXLHDE32../MSXLHDR32..

813 mm

864 mm

MSHDS40

MSXLHDE40../MSXLHDR40..

1016 mm

1067 mm

MSHDS48

MSXLHDE48../MSXLHDR48..

1219 mm

1270 mm

MSHDS56

MSXLHDE56../MSXLHDR56..

1422 mm

1474 mm

MSHDS64

MSXLHDE64../MSXLHDR64..

1626 mm

1677 mm

MSHDS72

MSXLHDE72../MSXLHDR72..

1829 mm

1880 mm

Model

Data
Sheet

108622

NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%.

EZ-SCREEN® Type 2 Lens Shields

Download
PDF

Used With
Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Lens Shield
Length (L)

LSS-150

LS2..30-150

150 mm

210 mm

LSS-300

LS2..30-300

300 mm

360 mm

LSS-450

LS2..30-450

450 mm

510 mm

LSS-600

LS2..30-600

600 mm

660 mm

LSS-750

LS2..30-750

750 mm

810 mm

LSS-900

LS2..30-900

900 mm

959 mm

LSS-1050

LS2..30-1050

1050 mm

1109 mm

LSS-1200

LS2..30-1200

1200 mm

1558 mm

LSS-1350

LS2..30-1350

1350 mm

1708 mm

LSS-1500

LS2..30-1500

1500 mm

1858 mm

Model

Data
Sheet

CABLES &
WIRING
BRACKETS

121366

CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%.

ACCESSORIES

More information online at

bannerengineering.com

215

ACCESSORIES
Explosive & Harsh Duty Solutions

Tubular Enclosures
Available for EZ-SCREEN or MINI-SCREEN
Detailed
Dimensions

Ideal for high-power washdown environments
Made of clear FDA-grade polycarbonate
tubing, with acetal end caps
Includes stainless mounting brackets and
hardware
Rated NEMA 4X; IP67
L

EZA-TE models: 86.4 mm
MSA-TE models: 86.4 mm
MSHDTA-TE models: 122.4 mm

Tubular Enclosure
(EZA-TE model shown)

EZA-TE EZ-SCREEN® Series Tubular Enclosures

Download
PDF

Used With

CABLES &
WIRING

Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Enclosure
Height (L)

EZA-TE-150

SLS..-150

150 mm

439 mm

EZA-TE-300

SLS..-300

300 mm

541 mm

STANDS

EZA-TE-450

SLS..-450

450 mm

744 mm

HARSH DUTY
SOLUTIONS

EZA-TE-600

SLS..-600

600 mm

846 mm

EZA-TE-750

SLS..-750

750 mm

1024 mm

EZA-TE-900

SLS..-900

900 mm

1151 mm

EZA-TE-1050

SLS..-1050

1050 mm

1354 mm

EZA-TE-1200

SLS..-1200

1200 mm

1455 mm

EZA-TE-1350

SLS..-1350

1350 mm

1608 mm

EZA-TE-1500

SLS..-1500

1500 mm

1760 mm

EZA-TE-1650

SLS..-1650

1650 mm

1913 mm

EZA-TE-1800

SLS..-1800

1800 mm

2065 mm

Model

BRACKETS
CORNER
MIRRORS

REPLACEMENT
PARTS

Data
Sheet

ACCESSORIES

117107

NOTE: Use of the enclosure affects the sensing range of the emitter/receiver used: when used in pairs, range can be reduced
by 50%.

216

More information online at

bannerengineering.com

ACCESSORIES
Explosive & Harsh Duty Solutions

MSA-TE MINI-SCREEN® Series Tubular Enclosures

Download
PDF

Used With
Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Enclosure
Height (L)

MSA-TE-4

MSXLE4../MSXLR4..

114 mm

338 mm

MSA-TE-8

MSXLE8../MSXLR8..

215 mm

439 mm

MSA-TE-12

MSXLE12../MSXLR12..

305 mm

541 mm

MSA-TE-16

MSXLE16../MSXLR16..

406 mm

643 mm

MSA-TE-20

MSXLE20../MSXLR20..

508 mm

744 mm

MSA-TE-24

MSXLE24../MSXLR24..

610 mm

846 mm

MSA-TE-28

MSXLE28../MSXLR28..

711 mm

947 mm

MSA-TE-32

MSXLE32../MSXLR32..

813 mm

1049 mm

MSA-TE-36

MSXLE36../MSXLR36..

914 mm

1151 mm

MSA-TE-40

MSXLE40../MSXLR40..

1016 mm

1252 mm

MSA-TE-44

MSXLE44../MSXLR44..

1118 mm

1354 mm

MSA-TE-48

MSXLE48../MSXLR48..

1219 mm

1455 mm

Model

Data
Sheet

109307

NOTE: Use of the enclosure affects the sensing range of the sensor used: when used in pairs, range can be reduced by 50%.

MSHDA-TE Heavy-Duty MINI-SCREEN® & EZ-SCREEN® Point and Grid Series
Tubular Enclosures

Download
PDF

CABLES &
WIRING

Used With
Model

Model
Family

Emitter/Receiver
Model

Emitter/Receiver
Defined Area

Emitter/Receiver
Protected Height

Enclosure
Height (L)

MSHDA-TE-6

EZ-SCREEN Point

SP..1

—

—

389 mm

MSHDA-TE-24

MINI-SCREEN

MSXLHDE24../MSXLHDR24..

610 mm

—

846 mm

MINI-SCREEN

MSXLHDE32../MSXLHDR32..

813 mm

—

EZ-SCREEN Grid

SG..2-500
SG..2-584

—

500 mm
584 mm

MINI-SCREEN

MSXLHDE40../MSXLHDR40..

1016 mm

—

EZ-SCREEN Grid

SG..3-400

—

800 mm

MINI-SCREEN

MSXLHDE48../MSXLHDR48..

1219 mm

—

SG..3-533
SG..4-300

—

1066 mm
900 mm

1455 mm

EZ-SCREEN Grid
MSHDA-TE-56

MINI-SCREEN

MSXLHDE56../MSXLHDR56..

1422 mm

—

1659 mm

MSHDA-TE-64

MINI-SCREEN

MSXLHDE64../MSXLHDR64..

1626 mm

—

1862 mm

MSHDA-TE-72

MINI-SCREEN

MSXLHDE72../MSXLHDR72..

1829 mm

—

2065 mm

MSHDA-TE-32

MSHDA-TE-40

CORNER
MIRRORS

HARSH DUTY
SOLUTIONS

1049 mm

REPLACEMENT
PARTS

117106

ACCESSORIES

NOTE: Use of the enclosure affects the sensing range of the sensor used: when used in pairs, range can be reduced by 50%.

More information online at

BRACKETS

STANDS

1252 mm

MSHDA-TE-48

Data
Sheet

bannerengineering.com

217

ACCESSORIES
Explosive & Harsh Duty Solutions

EZA-S Protective Enclosures

145.0 mm

Provide rugged protection for sensors and
mirrors in high-traffic areas

Detailed
Dimensions

Available for mirrors and EZ-SCREEN Point
and Grid
Meets ANSI/RIA 15.06 and ISO 13855
standards for beam spacing
Includes independently adjustable mirrors
and bubble level to simplify alignment
Rotates up to 20°
L

ø 177.8 mm

EZA-S Protective Enclosure
CABLES &
WIRING
BRACKETS

EZA-S EZ-SCREEN® Protective Enclosures

CORNER
MIRRORS

Download
PDF

Used With
STANDS

Model*

HARSH DUTY
SOLUTIONS

Emitter/Receiver
Model

Emitter/Receiver
Protected Area

Enclosure
Height (L)

No. of
Openings

Application
Standard

SG..4-300

900 mm

1543 mm

4

ANSI/RIA R15.06
ISO 13855

SG..3-400

800 mm

1238 mm

3

ANSI/RIA R15.06
ISO 13855

SG..2-500

500 mm
1035 mm

2

ISO 13855

EZA-S300

REPLACEMENT
PARTS

EZA-S300-M

ACCESSORIES

EZA-S400
EZA-S400-M

Data
Sheet

EZA-S500
EZA-S500-M

109308
EZA-S500-M45

SP..1

—

SG..3-533

1066 mm

SG..2-584

584 mm

EZA-S533
1543 mm

3

ANSI/RIA R15.06

1238.2 mm

2

ANSI/RIA R15.06

EZA-S533-M
EZA-S584
EZA-S584-M
EZA-S584-M45

SP..1

—

*

Model numbers with suffix “M” include vertical mirrors for perimeter-guarding applications.
Model numbers with suffix “M45” include two 45°-mounted mirrors for access-guarding applications.
NOTE: The rear-surfaced glass mirrors are rated at 85% efficiency per mirror and reduce maximum range by 8% per mirror.

218

More information online at

bannerengineering.com

ACCESSORIES
Explosive & Harsh Duty Solutions

Explosion-Proof Enclosures
Protects light screen in environments with
flammable gases, liquids or dust

Detailed
Dimensions

Available for EZ-SCREEN Point and Grid,
MINI-SCREEN, and
MICRO-SCREEN
Complies with UL and CSA
for use in specific hazardous
atmospheres
Includes mounting brackets and
hardware
1321 mm

Reduces range by approximately
25% per emitter/receiver pair
968 mm

117 mm

114 mm

Model ..-XPE-32
Explosion-Proof Enclosure

254 mm

197 mm

CABLES &
WIRING

Model ..-XPE-43
Explosion-Proof Enclosure

BRACKETS
CORNER
MIRRORS
STANDS

Explosion-Proof Enclosures

Download
PDF

HARSH DUTY
SOLUTIONS

Used With
Emitter/Receiver
Defined Area

SS-XPE-32

EZ-SCREEN

450 to 600 mm

US-XPE-32

MICRO-SCREEN

Enclosure
Height

Data
Sheet

968 mm

63443

1321 mm

64216

REPLACEMENT
PARTS

ACCESSORIES

Model
Family

Model

508 to 711 mm
MS-XPE-32

MINI-SCREEN

SS-XPE-43

EZ-SCREEN

US-XPE-43

MICRO-SCREEN

750 to 1050 mm
813 to 1016 mm

MS-XPE-43

MINI-SCREEN

NOTE: Use of enclosure affects the sensing range of emitter/receiver used: when used in pairs, range can be reduced by 25%.

More information online at

bannerengineering.com

219

ACCESSORIES
Replacement Parts

PICO-GUARD® Replacement Parts
Model
EZA-LAT-1

Part
Number

Description

66027

Replacement adapter hardware for Grid.

MGA-KS0-1

30140

SPST key reset switch, no wires (includes key)

SFA-CMH

69769

PICO-GUARD controller mounting hardware

SFA-CTB1

02638

PICO-GUARD controller 4-position terminal block

SFA-CTB2

02639

PICO-GUARD controller 9-position terminal block

SFA-CTB3

02640

PICO-GUARD controller 18-position terminal block

SFA-CTB4

75264

PICO-GUARD controller 5-position terminal block

SFA-IAG

02618

Interlock alignment guide

SFA-LAT-12

73000

Replacement adapter hardware for SPF12

SFA-LAT-30

73001

Replacement adapter hardware for SPF30

SFA-W-1

75158

Replacement window for Grid

STP-3

43958

Specified test piece, 45 mm dia. for Grid

EZ-SCREEN® Replacement Parts
Model

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

Part
Number

Description

EZA-ADE-1

71447

Copolyester access cover with label for 14 or 30 mm resolution emitters

EZA-ADE-2

72929

Copolyester access cover with inverted label for 14 or 30 mm resolution emitters

EZA-ADR-1

71448

Copolyester access cover with label for 14 or 30 mm resolution receiver

EZA-ADR-2

72930

Copolyester access cover with inverted label for 14 or 30 mm resolution receiver

EZA-AP-1

62859

Access port plug with o-ring for Grid and Point

EZA-CP-13

62860

Pg13.5 plug with o-ring for Grid and Point

EZA-ECE-1

62858

Emitter wiring chamber end cap (with gasket, captive screws, 3 plugs with o-rings, terminal block) for
Grid and Point

EZA-ECR-1

62857

Receiver wiring chamber end cap (with gasket, captive screws, 3 plugs with o-rings, terminal block) for
Grid and Point

EZA-SW-1

62863

Spanner wrench for Grid and Point

EZA-TBE-1

62861

Emitter terminal block for Grid and Point

EZA-TBR-1

62862

Receiver terminal block for Grid and Point

EZA-MBK-1

60630

Center bracket kit (includes 1 bracket and hardware to mount to MSA Series stands) for 14 or 30 mm
resolution EZ-SCREEN

EZA-MBK-11

71470

Standard bracket kit with hardware (includes 2 end brackets and hardware to mount to MSA Series stands)
for 14 or 30 mm resolution EZ-SCREEN

EZA-TP-1

71449

Access cover security plate (includes 2 screws, wrench) for 14 or 30 mm resolution EZ-SCREEN

MGA-K-1

28513

Replacement key for switch MGA-KS0-1

MGA-KS0-1

30140

Keyed reset switch (same as that included in kits)

SMA-MBK-1

61933

SSM Series Mirror Bracket Kit

STP-3

43958

Specified test piece, 45 mm dia.

STP-13

71929

14 mm test piece (for 14 mm resolution systems)

STP-14

71930

30 mm test piece (for 14 mm resolution systems with 2-beam Reduced Resolution and for 30 mm
resolution systems)

STP-15

71931

60 mm test piece (for 30 mm resolution systems with 2-beam Reduced Resolution)

220

More information online at

bannerengineering.com

ACCESSORIES
Replacement Parts

MICRO-SCREEN® Replacement Parts
Model
MGA-GS-1

Part
Number

Description

27850

Ground strap for control box door

MGA-K-1

28513

Replacement key for MGA-KS-1 key switch

MGA-KS-1

28509

Key switch, pre-wired (includes key)

MGA-KSO-1

30140

SPST key reset switch, no wires (includes key)

MSA-MH-1

39024

Control box mounting hardware

MSA-PSD-1

61499

Power supply/relay board (115/230V ac) for models without fixed blanking

MSA-PSD-2

47377

Power supply/relay board (115/230V ac) for models with fixed blanking

MSA-PST-2

47376

Power supply/relay board (24V dc)

MSA-RM-1

39025

Relay module

MSA-RM-2

59689

Relay module with an additional complementary normally closed output and 6 amp FSDs

MSMA-PSC-2

62867

Power supply

MUSA-TA-1

43834

Transformer

STP-2

43957

Specified test piece, 19 mm dia.

STP-4

43836

Specified test piece, 32 mm dia.

STP-5

43837

Specified test piece, 58 mm dia.

STP-9

50694

Specified test piece, 83 mm dia.

USAB-1

51885

Controller board (light screen)

USAB-2

51886

Controller board (light screen)

USA-MH-2

60110

Control box mounting hardware

USA-PTB-1

55676

Terminal block, 20 position, emitter/receiver

USA-PTB-2

55677

Terminal block, 15 position, emitter/receiver

USA-PTB-3

55678

Terminal block, 5 position, DeviceNet

USA-PTB-4

55679

Terminal block, 20 position, output/E-stop/power hookup

BRACKETS

USA-PTB-5

55680

Terminal block for 5 position, FSD

CORNER
MIRRORS

CABLES &
WIRING

USCMB-1

51651

Mounting hardware kit for one emitter/receiver, 711 to 914 mm defined area

USCMB-2

54976

Mounting hardware kit for one emitter/receiver, 1016 to 1829 mm defined area

STANDS

USDAB-1

50002

Controller board, no Fixed Blanking, Trip output

HARSH DUTY
SOLUTIONS

USDAB-1D

52245

Controller board for DeviceNet, no Fixed Blanking, Trip output

USDAB-1E

62092

Controller board for models with External Device Monitoring (EDM)

USDAB-2

50003

Controller board with Fixed Blanking, Trip output

USDAB-2D

52246

Controller board for DeviceNet with Fixed Blanking, Trip output

USDAL-1

55624

Controller board, no Fixed Blanking, Latch output

USDAL-1D

55625

Controller board for DeviceNet, no Fixed Blanking, Latch output

USDAL-2

55626

Controller board with Fixed Blanking, Latch output

USDAL-2D

55627

Controller board for DeviceNet with Fixed Blanking, Latch output

USDA-RM-1

50001

Power supply/relay board, 2 FSDs

USDA-RM-2

55707

Power supply/relay board, 4 FSDs

USMAB-1

64734

Controller board for Muting, Trip output

USMAL-1

60643

Controller board for Muting, Latch output

USMA-PSC-1

60642

Power supply

USMB-1

50000

Mounting hardware kit for one emitter/receiver, 102 to 610 mm defined area

bannerengineering.com

ACCESSORIES

More information online at

REPLACEMENT
PARTS

221

ACCESSORIES
Replacement Parts

MINI-SCREEN® Replacement Parts
Model
BA2MB

CABLES &
WIRING
BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

Part
Number

Description

40091

Mounting hardware kit for one emitter/receiver

MDSA-PTB-1

61083

Terminal block, positions 1-26

MDSA-PTB-2

61084

Terminal block, positions 27-52

MDSDAL-1

65785

Controller board, Latch output

MDSDA-RM-1

48225

Power supply/relay board (24V dc)

MGA-GS-1

27850

Ground strap for control box door

MGA-GST-1

28511

Ground strap for transformer

MGA-K-1

28513

SPST key reset switch, no wires (includes key)

MGA-KS-1

28509

Key switch, pre-wired (includes key)

MGA-KSO-1

30140

SPST key reset switch, no wires (includes key)

MSAB-1

39029

Controller module, Trip output, without fixed blanking

MSAB-2

47381

Controller module (light screen), Trip output, with fixed blanking

MSAL-1

55695

Controller module, Latch output

MSA-MH-1

39024

Control box mounting hardware

MSA-PSD-2

47377

Power supply/relay board (115/230V ac) for metal boxes with fixed blanking

MSA-RM-1

39025

Relay module

MSA-RM-2

59689

Relay module with an additional complementary normally closed output and 6 amp FSDs

MSA-PSA-1

39027

Power supply board (115V ac) for metal boxes with Trip output

MSA-PSA-2

55694

Power supply board (115V ac) for metal boxes with Latch output

MSA-PSB-1

39028

Power supply board (230V ac) for metal boxes with Trip output

MSA-PSB-2

62006

Power supply board (230V ac) for metal boxes with Latch output

MSA-PST-1

43738

Power supply board (24V dc) for metal boxes without fixed blanking

MSA-PST-2

47376

Power supply board (24V dc) for metal boxes with fixed blanking

MSA-PTB-1

61077

Terminal block, positions 1-17

MSA-PTB-2

61078

Terminal block, positions 18-34

MSDAB-1

45281

Controller board, Trip output

MSDAL-1

48450

Controller board, Latch output

MSDA-RM-1

45280

Power supply/relay board (24V dc)

MSMA-PSC-2

62867

Power supply

MUSAB-1

43833

Controller module

MUSA-MH-1

43831

Control box mounting hardware

MUSA-PS-1

43832

Power supply board

MUSA-TA-1

43834

Transformer

STP-1

43835

Specified test piece, 38 mm dia.

STP-10

62026

Specified test piece, 89 mm dia.

STP-2

43957

Specified test piece, 19 mm dia.

STP-3

39911

Specified test piece, 45 mm dia.

STP-4

43836

Specified test piece, 32 mm dia.

STP-5

43837

Specified test piece, 58 mm dia.

STP-6

43838

Specified test piece, 76 mm dia.

STP-7

48981

Specified test piece, 26 mm dia.

222

More information online at

bannerengineering.com

ACCESSORIES
Replacement Parts

MINI-SCREEN® Replacement Parts (cont'd)
Model
STP-8

Part
Number
49126

Description
Specified test piece, 51 mm dia.

USA-MH-2

60110

Control box mounting hardware

USMAB-1

64734

Muting system controller, Trip output

USMAL-1

60643

Muting system controller, Latch output

Safety Interlock Switches Replacement Parts
Model*

Description

Used In

SI-LM40KHD

49474

SI-LM40MKH..D kits

SI-LM40KHE

49475

SI-LM40MKH..E kits

SI-LM40KHF

49476

SI-LM40MKH..F kits

SI-LM40KVD

49478

SI-LM40MKVD kit

SI-LM40KVE

49479

SI-LM40MKVE kit

SI-LS42DSG

47871

SI-LS42DMSG.. kits

SI-LS42USG

47872

SI-LS42UMSG.. kits

SI-LS42DSH

47875

SI-LS42DMSH.. kits

SI-LS42USH

47876

SI-LS42UMSH.. kits

SI-LS42DSI

47879

SI-LS42DMSI.. kits

SI-LS42USI

47880

SI-LS42UMSI.. kits

SI-LS42DSJ

47883

SI-LS42DMSJ.. kits

SI-LS42DMG

47873

SI-LS42DMMG.. kits

CABLES &
WIRING

SI-LS42UMG

47874

SI-LS42UMMG.. kits

BRACKETS

SI-LS42DMH

47877

SI-LS42DMMH.. kits

SI-LS42UMH

47878

SI-LS42UMMH.. kits

CORNER
MIRRORS

SI-LS42DMI

47881

SI-LS42DMMI.. kits

STANDS

SI-LS42UMI

47882

SI-LS42DMJ

47884

SI-LS42DMMJ.. kits

SI-LS100F

49480

SI-LS100.. kits

SI-LS83D

49481

SI-LS83.. kits

SI-LS83E

49482

SI-LS83..E kits

SI-QM100DSG

49460

SI-QM100DMSG kit

SI-QM100ASG

49461

SI-QM100AMSG kit

SI-QM100DMG

49463

SI-QM100DMMG kit

SI-QM100AMG

49464

SI-QM100AMMG kit

SI-QS75C

49472

SI-QS75..C kits

SI-QS75CHF

49473

SI-QS75MCHF kit

SI-QS90D

49466

SI-QS90..D kits

SI-QS90DHF

49467

SI-QS90MDHF kit

SI-QS90E

49468

SI-QS90..E kits

SI-QS90EHF

49469

SI-QS90MEHF kit

SI-QS90F

49470

SI-QS90..F kits

SI-QS90FHF

49471

SI-QS90MFHF kit

Individual Interlock
(without actuator)

SI-LS42UMMI.. kits

HARSH DUTY
SOLUTIONS
REPLACEMENT
PARTS

ACCESSORIES

*

Part
Number

Kits with one safety interlock switch and an actuator are available (see pages 148-160).

More information online at

bannerengineering.com

223

ACCESSORIES
Replacement Parts

Replacement Actuators for Safety Interlock Switches
Part
Number

Model

CABLES &
WIRING

Description

Used With

SI-QM-90A

48556

Flexible in-line, trumpet-style, metal actuator used for doors
or covers where alignment is difficult to maintain. Flexes
in all directions. Minimum engagement radius for hinged
closures is 150 mm.

• SI-LM40MKV models

SI-QM-SB

47895

Rigid in-line metal actuator used for doors or covers.
Slide-bolt design for use in heavy-duty applications where
alignment is difficult to maintain.

• SI-LM40MKH models
• SI-LS42 models
• SI-QM100 models

SI-QM-SMFA

48562

Flexible in-line metal actuator used for doors or covers
where alignment is difficult to maintain. Flexes in all
directions. Minimum engagement radius for hinged closures
is 150 mm.

• SI-LM40MKH models
• SI-LS42 models
• SI-QM100 models

SI-QM-SSA

48555

Rigid in-line metal actuator used for doors or covers
with accurate alignment, such as sliding doors. Minimum
engagement radius for hinged closures is 400 mm.

• SI-LM40MKH models
• SI-LS42 models
• SI-QM100 models

SI-QS-100

48561

High-extraction-force actuator for particularly heavy or large
doors. Adjustable from 50 to 100 Newtons (force). Used
only for switches with in-line actuator SI-QS-SSA.

• SI-QS75 models
• SI-QS90 models

SI-QS-SSA

48551

Rigid in-line metal (die-cast steel) actuator for doors or
covers with a radius of 150 mm or greater.

• SI-QS75 (high-force)
models
• SI-QS90 (high-force)
models

SI-QS-SSA-2

58855

Rigid in-line metal (stamped stainless steel) actuator used
for doors or covers with accurate alignment, such as sliding
doors. Minimum engagement radius for hinged closures is
150 mm.

• SI-LS83 models
• SI-LS100 models

SI-QS-SSA-3

58856

Rigid in-line metal (stamped stainless steel) actuator used
for doors or covers with accurate alignment, such as sliding
doors. Right-angle mounting flange. Minimum engagement
radius for hinged closures is 150 mm.

• SI-LS83 models
• SI-LS100 models

SI-QS-SSA-4

47896

Rigid in-line metal (stamped stainless steel) actuator for
doors or covers with a radius of 150 mm or greater.

• SI-QS75 models
• SI-QS90 models

46996

Flexible in-line metal (die-cast steel) actuator for hinged
doors with a radius of 50 mm or greater. Flexes in all
directions. Minimum engagement radius for hinged closures
is 150 mm.

• SI-LS83 models
• SI-LS100 models
• SI-QS75 models
• SI-QS90 models

BRACKETS
CORNER
MIRRORS
STANDS
HARSH DUTY
SOLUTIONS

ACCESSORIES

REPLACEMENT
PARTS

SI-QS-SSU

Safety Interlock Switch Replacement Parts
Model
SI-LS42-COVER

224

Part
Number
46995

More information online at

Description
Replacement terminal cover

bannerengineering.com

Used
With
SI-LS42 models

ACCESSORIES
Replacement Parts

Components for Wire Rope Assembly
Part
Number

Package
Quantity

RPA-C1-10

62074

10 m

RPA-C1-20

62075

20 m

RPA-C1-100

69799

100 m

RPA-C2-10

62076

10 m

RPA-C2-20

62077

20 m

RPA-C2-50

46694

50 m

RPA-C2-80

46695

80 m

RPA-C3-20

62078

20 m

RPA-C3-100

62079

RPA-T1-4

Eye Bolts

Turnbuckles

Clamps

Thimbles

Wire Ropes

Models

• RP-LM40 models

3 mm steel wire rope with
0.5 mm red PVC jacket
(unterminated)

• RP-LS42 models
• RP-QM72/QMT72 models

• RP-QM90 models

100 m

4 mm steel wire rope with
0.5 mm red PVC jacket
(unterminated)

62065

4 pcs

Thimble for 2 mm wire rope

• RP-LM40 models

RPA-T2-4

62066

4 pcs

Thimble for 3 mm wire rope

• RP-LS42 models
• RP-QM72/QMT72 models

RPA-T3-4

62067

4 pcs

Thimble for 4 mm wire rope

• RP-QM90 models

RPA-CC1-4

62068

4 pcs

Clamp for 2 mm wire rope

• RP-LM40 models

RPA-CC2-4

62069

4 pcs

Clamp for 3 mm wire rope

• RP-LS42 models
• RP-QM72/QMT72 models

RPA-CC3-4

62070

4 pcs

Clamp for 4 mm wire rope

• RP-QM90 models

RPA-TA1-1

62071

1 pc

#4 Turnbuckle

• RP-LM40 models
• RP-LS42 models
• RP-QM72/QMT72 models

CABLES &
WIRING

RPA-TA2-1

62072

1 pc

#5 Turnbuckle

• RP-QM90 models

BRACKETS

1/4" - 20 Eye bolt

• RP-LM40 models
• RP-LS42 models
• RP-QM72/QMT72 models

RPA-EB2-1

Pulleys

Used
With

2 mm steel wire rope with
0.5 mm red PVC jacket
(unterminated)

RPA-EB1-1

62080

1 pc

65039

1 pc

5/16" - 20 Eye bolt

• RP-QM90 models

RPA-P1-1

62081

1 pc

Pulley

• RP-LM40 models
• RP-LS42 models
• RP-QM72/QMT72 models

RPA-S1-1

62073

1 pc

Tensioning Spring #1

• RP-QM90 models

RPA-S2-1

62089

1 pc

Tensioning Spring #2

• RP-QM90 models

RPA-S3-1

46693

1 pc

Tensioning Spring #3

• RP-LS42 models

RPA-S4-1

46994

1 pc

Tensioning Spring #4

• RP-LS42 models

SI-LS42-COVER

Part
Number
46995

Description
Replacement terminal cover

More information online at

Used
With
RP-LS42 models

bannerengineering.com

STANDS
HARSH DUTY
SOLUTIONS

Rope Pull Replacement Parts
Model

CORNER
MIRRORS

REPLACEMENT
PARTS

ACCESSORIES

Tensioning
Springs

Description

225

ACCESSORIES

ACCESSORIES

226

More information online at

bannerengineering.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
Page Mode                       : UseThumbs
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Modify Date                     : 2006:05:02 12:39:37-05:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Create Date                     : 2006:03:07 10:56:22-06:00
Metadata Date                   : 2006:05:02 12:39:37-05:00
Format                          : application/pdf
Creator                         : ttanchin
Title                           : 8_73850_Accessories.indd
Document ID                     : uuid:b57acc82-adfb-11da-886a-000d932eb05c
Instance ID                     : uuid:a134a5f0-da02-11da-9738-000d932eb05c
Has XFA                         : No
Page Count                      : 54
Page Layout                     : SinglePage
Author                          : ttanchin

EXIF Metadata provided by EXIF.tools