Product Detail Manual
2014-09-04
: Pdf 119345-Attachment 119345-Attachment 782274 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
2: 5: SYS19: BASE2 PDFINFO 50: 95: 98: JOB: CRMAIN06-1007-1 Name: 2P-1007 100: DATE: JAN 19 2006 Time: 6:08:30 PM Operator: RB ENR Dead Front Interlocked Circuit Breaking Receptacles ENP Plugs General Purpose ArkɀGard® 2; Factory Sealed COLOR: CMYK TCP: 15001 Cl. I, Div. 1 & 2, Groups B†,C,D Cl. II, Div. 1 & 2, Groups F,G Cl. III NEMA 3,7BCD,9FG,12 Typedriver Name: TS name Explosionproof Dust-Ignitionproof Raintight Wet Locations csm no.: 100 2P Application: ENR receptacles and ENP plugs are used: ɀ with portable electrical equipment such as compressors, tools, lighting systems, and similar devices ɀ in areas made hazardous by the presence of flammable vapors and gases or combustible dusts ɀ wherever portable electrical equipment is likely to be transferred from hazardous to nonhazardous areas ɀ in damp and corrosive areas ɀ when power requirements do not exceed 20 amperes ɀ where general purpose application is required Features: ɀ ArkȿGard 2 receptacle incorporates three spring-loaded slide keys that prevent the receptacle face plate from being rotated until the ENP plug is fully inserted into the receptacle. To make the connection, the ENP plug is fully inserted; and the receptacle face moved inward by pushing the plug forward (Fig. 1). The plug is then rotated, (Fig. 2), closing the circuit. As rotation begins, the plug becomes locked in the receptacle and cannot be accidentally disengaged. In making or breaking the circuit, any resulting electrical arc is confined in the factory-sealed chamber. ɀ Factory-sealed chamber encloses the potential arcing components between two explosion-proof threaded joints. These threads are specially coated to guarantee freedom of movement, which ensures on-off action. No additional seals are required. ɀ One piece molded gasket seals cover plate and ENP plug when plug is inserted, providing full environmental protection at the receptacle face. ɀ Top-hinged cover design with 45° downward angle provides superior protection in damp, wet, and dirty locations. ɀ Molded-in contact design provides superior interior contact reliability. ɀ ENP plugs can be used in nonhazardous areas with standard U-ground NEMA/EEMAC configuration 5 and 6 receptacles, eliminating the need for two separately equipped portable units of the same type. The ENR receptacle will not accept standard NEMA/ EEMAC configuration plugs. ɀ ENP plug handle body is designed with an internal cord strain relief mechanism and a cable sealing grommet which will accept various cable diameters. ɀ Field assembly is accomplished with standard tools. ɀ Use standard EDS back boxes. Figure 2 Figure 1 Grounding: ɀ NEC Article 501 and CEC Section 18 requires that metal frames or exposed noncurrent-carrying metal parts of portable devices used in hazardous locations be grounded through an extra conductor in the portable cord. ENR receptacles and ENP plugs are provided with an extra grounding pole. Standard Materials: ɀ Receptacle housing, spring door and plug body – die cast copper-free aluminum ɀ Interiors: receptacle – Krydon® fiberglassreinforced polyester material; plugs – nylon 100 ɀ Contacts: receptacle blade – brass; receptacle switch – silver; plug – brass ɀ Receptacle cover hinge pin and spring – stainless steel ɀ Receptacle gasket – neoprene ɀ Plug bushing – neoprene Standard Finishes: ɀ Copper-free aluminum – aluminum acrylic paint ɀ Brass – natural Electrical Rating Ranges: ɀ Receptacles – 20 amperes; 125 vac and 250 vac, 50-400 hertz ɀ Plugs – 15 amperes; 125 vac and 250 vac, 50-400 hertz 20 amperes; 125 vac and 250 vac, 50-400 hertz Certifications and Compliances: ɀ NEC: Class I, Division 1 and 2, Groups B†,C,D Class II, Division 1 and 2, Groups F,G Class III ɀ ANSI/UL Standard 1010 ɀ NEMA/EEMAC 3,7BCD,9FG ɀ CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Group G Class III CAUTION: To reduce the risk of ignition of hazardous atmospheres, do not use plugs or receptacles in Class II, Group F locations that contain electrically conductive dusts. Dimensions † Single gang receptacles purchased as a complete assembly with EDS back box are suitable for Class I, Group B usage. Two gang receptacles can be modified for Class I, Group B usage. Add the letter B to Cat. No. Example: ENRB22201. Seals must be installed within 11⁄2⍯ of each conduit opening. Receptacle units only (ie. ENR5201) are not suitable for Class I, Group B. a=31⁄2 for single gang; 79⁄16 for two gang. US: 1-866-764-5454 STIBOINFO((CRH:66008com:2P:1007)) CH0 0 2 P - 7 CAN: 1-800-265-0502 Copyright© 2006 Cooper Crouse-Hinds 1007 Zoom: 100 2: 5: SYS19: BASE2 PDFINFO 50: 95: 98: 100: JOB: CRMAIN06-1008-2 Name: 2P-1008 2P DATE: JAN 19 2006 Time: 6:08:31 PM Operator: RB ENR Dead Front Interlocked Circuit Breaking Receptacles ENP Plugs General Purpose (For US NEC Applications); ArkȿGard® 2; Factory Sealed ENR single gang dead end assembly Receptacle Rating Description Dead End ENR single gang dead end assembly with spring door open Hub Size 1⁄2 3⁄4 1 Single Gang Receptacle Assembly Cat. # ‡ ENR11201 ENR21201 ENR31201 COLOR: CMYK 20 amp, 125 volt ENR receptacle only, with spring door open Receptacle Unit Only Cat. # ENP plug 15 Amp NEMA Plug Config. Cat. # NEMA Config. ENP5151 Through Feed 3⁄4 1 1⁄2 Dead End 3⁄4 1 ENRC12201 ENRC22201 ENRC32201 ENR11202 ENR21202 ENR31202 ENR12202 ENR22202 ENR32202 20 amp, 250 volt 5-15P ENP6152 ENR6202 Through Feed 3⁄4 1 ENRC11202 ENRC21202 ENRC31202 NEMA Config. 5-20P ENP6202 6-20R 1⁄2 20 Amp Plug Cat. # ENP5201 5-20R ENRC11201 ENRC21201 ENRC31201 Explosionproof Raintight Wet Locations Dust-Ignitionproof ENR two gang dead end assembly with one spring door open ENR5201 1⁄2 Typedriver Name: TS name Cl. I, Div. 1 & 2, Groups B*,C,D Cl. II, Div. 1 & 2, Groups F,G Cl. III NEMA 3,7BCD,9FG,12 ENR two gang dead end assembly Two Gang Receptacle Assmebly Cat. # ‡ ENR12201 ENR22201 ENR32201 TCP: 15001 6-15P 6-20P ENRC12202 ENRC22202 ENRC32202 * Single gang receptacles purchased as a complete assembly with EDS back box are suitable for Class I, Group B usage. Two gang receptacles can be modified for Class I, Group B usage. Add the letter B to Cat. No. Example: ENRB22201. Seals must be installed within 11⁄2⍯ of each conduit opening. Receptacle units only (ie. ENR5201) are not suitable for Class I, Group B. ‡ With Feraloy 1008 STIBOINFO((CRH:66008com:2P:1008)) CH0 0 2 P - 8 US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2006 Cooper Crouse-Hinds ® Iron Alloy EDS, EDSC back boxes. csm no.: 100 Zoom: 100 2: 5: SYS19: BASE2 PDFINFO 50: 95: 98: 100: JOB: CRMAIN06-1009-1 Name: 2P-1009 DATE: JAN 19 2006 Time: 6:08:33 PM Operator: RB ENR Dead Front Interlocked Circuit Breaking Receptacles ENP Plugs; General Purpose (For CEC Applications) ArkȿGard® 2; Factory Sealed ENR single gang dead end assembly Receptacle Rating Description Dead End TCP: 15001 Cl. I, Div. 1 & 2, Groups B*,C,D Cl. II, Div. 1 & 2, Group G Cl. III EFC 3,7BCD,9G,12 ENR single gang dead end assembly with spring door open Hub Size 1⁄2 3⁄4 1 COLOR: CMYK Single Gang Receptacle Assembly Cat. # ‡ ENR11151 ENR21151 ENR31151 Explosionproof Raintight Wet Locations Dust-Ignitionproof ENR two gang dead end assembly Two Gang Receptacle Assembly Cat. # ‡ ENR12151 ENR22151 ENR32151 15 amp, 125 volt Typedriver Name: TS name Receptacle Unit Only Cat. # EEMAC Config. Plug Cat. # Through Feed 3⁄4 1 1⁄2 Dead End 3⁄4 1 ENRC12151 ENRC22151 ENRC32151 ENR11152 ENR21152 ENR31152 ENR12152 ENR22152 ENR32152 15 amp, 250 volt 5-15P ENP6152 ENR6152 6-15A 1⁄2 Through Feed 3⁄4 1 1⁄2 Dead End 3⁄4 1 ENRC11152 ENRC21152 ENRC31152 ENRC12152 ENRC22152 ENRC32152 ENR11201 ENR21201 ENR31201 ENR12201 ENR22201 ENR32201 20 amp, 125 volt 6-15P ENP5201 ENR5201 5-20R 1⁄2 Through Feed 3⁄4 1 1⁄2 Dead End 3⁄4 1 ENRC11201 ENRC21201 ENRC31201 ENRC12201 ENRC22201 ENRC32201 ENR11202 ENR21202 ENR31202 ENR12202 ENR22202 ENR32202 20 amp, 250 volt 6-20R Through Feed 3⁄4 1 ENRC11202 ENRC21202 ENRC31202 5-20P ENP6202 ENR6202 1⁄2 EEMAC Config. ENP5151 5-15R ENRC11151 ENRC21151 ENRC31151 2P ENR two gang dead end assembly with one spring door open ENR5151 1⁄2 csm no.: 100 6-20P ENRC12202 ENRC22202 ENRC32202 * Single gang receptacle units can be modified for Class 1, Group B usage. Add suffix B to the Cat. No. Example: ENRB11201. Seals must be installed immediately adjacent to each conduit opening. ‡ 15A With Copper-free aluminum EDS, EDSC back boxes. 20A with Feraloy® iron alloy EDS, EDSC back boxes US: 1-866-764-5454 STIBOINFO((CRH:66008com:2P:1009)) CH0 0 2 P - 9 CAN: 1-800-265-0502 © Copyright 2006 Cooper Crouse-Hinds 1009 Zoom: 100
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2006:01:23 17:13:23Z Create Date : 2006:01:23 17:13:23Z Metadata Date : 2006:01:23 17:13:23Z Format : application/pdf Document ID : uuid:3a93c4f8-a1bd-42df-af32-045e11dd2c92 Instance ID : uuid:6f1f6601-c9eb-4b60-947b-e22987782ddc Producer : Acrobat Distiller 6.0.1 for Macintosh Page Count : 3 Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools