Product Detail Manual
114279-Catalog 114279-Catalog 114279-Catalog 783936 Batch7 unilog cesco-content
2014-09-05
: Pdf 119547-Attachment 119547-Attachment 783936 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 59
| Download | |
| Open PDF In Browser | View PDF |
Ci Section C CONTORLS INDEX D2C Series DuraTech Control Stations ...................2 - 5 D2C Series Dimensional Data ................................6 - 7 XCS/XS/SWB Series Control Stations External Sealing Required................18 - 25 SWB Series Device Boxes ..........................................19 SWB Series Conduit Opening Data ............................20 CS Series CONSPEC Control Stations ...................8 - 10 CS Series Dimensional Data Catalog Logic .........................................11 XCS Series Cover Assemblies Control Stations ......21 - 25 XCS Series Blank Covers...........................................26 FXCS/XCS Series Accessories, Replacement Parts..........26 - 27 FXCS Series Seal-X Factory Sealed Control Stations....................12 - 17 FXB Series Seal-X Splice Boxes ................................13 FXCS Series Seal-X Factory Sealed Cover Assemblies ............................14 - 17 XS Series Tumbler Switch........................................28 XAL/XAS Series Fire Alarm Stations ..................................29 C2 D2C SERIES • CONTROLS C O N T R O L S TAT I O N S - N O N - M E TA L L I C Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llB, llA NEMA 3, 4, 4X, 7 (Div.2) Factory Sealed Contact Block 1N.O./1N.C. F E AT U R E S - S P E C I F I C AT I O N S PRODUCT LINE OVERVIEW ASSEMBLIES Applications Hazardous and corrosive environments such as refineries, chemical plants, water treatment and bio gas plants, and wherever a combustible gas-air mixture may occur. Features • Enclosures of rugged polyester resin and gasketed for NEMA 4X hose down protection One device Two devices Three devices CONTROL DEVICES Shrouded or mushroom style Push Button • Factory sealed contacts rated for heavy duty NEMA A600/Q300 explosion-protected operation Maintained push-pull or twist-release button Control Switch Multiple position rotary maintained or momentary action Pilot Light Full voltage, resistor or transformer and multi-voltage LED types • No external seals required for most applications • Comprehensive selection of control operators including: – Push buttons (standard or mushroom caps) with momentary & maintained action for multiple functions or emergency stop ENCLOSURES – Rotary selector switches for maintained or momentary operation – Pilot lights (LED as standard) in multiple voltages and colors • Options for various enclosures entry types and legend plates Size 1 Size 2 ENTRIES AND ACCESSORIES Hub with Grounding locknut Legend Plates Hole Plug Lockouts C3 D2C SERIES • CONTROLS A S S E M B L E D C O N T R O L S TAT I O N S D2CG2B2 D2CG2MMR3 D2CG2B7 D2CG2S3C3 D2CG8B15 The control stations on this page are the most commonly used configurations, including combinations of push buttons, pilot lights and selector switches. See the following pages for components to configure custom stations. F E AT U R E S - S P E C I F I C AT I O N S ONE DEVICE, DEAD END1 Single Push Button (Momentary Contact) Complete Units (Box & Cover) NPT SIZE D2CG2B1 3/4” D2CG2B2 D2CG2B3 Push-Pull Mushroom Button (Maintained Contact) D2CG2MMR3 3/4” Pilot Light (120V AC Light Emitting Diode Type) D2CG2B24CL D2CG2B24GL D2CG2B24RL 3/4” D2CG2B24BL D2CG2B24AL D2CG2B24WL 2 Position Rotary Selector Switch (Maintained Contact) D2CG2S2A3 3/4” DIAGRAM LEFT DIAGRAM CENTER COLOR GREEN RED BLACK LEGEND2 START STOP BLANK RED EMERGENCY STOP CLEAR GREEN RED BLUE AMBER WHITE LEGEND RIGHT BLANK BLANK BLANK BLANK BLANK BLANK 3 Position Rotary Selector Switch (Maintained Contact) D2CG2S3C3 3/4” OFF - ON HAND-OFF-AUTO TWO DEVICES, DEAD END1 Two Push Buttons (Both Momentary Contact) Complete Units (Box & Cover) NPT SIZE DIAGRAM D2CG2B4 3/4” D2CG2B7 Pilot Light (120V AC Light Emitting Diode Type) and Push Button (Momentary Contact) D2CG2B13 3/4” COLOR GREEN - RED BLACK - BLACK LEGEND2 START - STOP BLANK RED LENS, BLACK BUTTON BLANK THREE DEVICES, DEAD END1 Pilot Light (120V AC Light Emitting Diode Type) and two push buttons (Both Momentary Contact) Complete Units (Box & Cover) NPT SIZE DIAGRAM COLOR RED LENS, GREEN D2CG8B15 3/4” & RED BUTTONS Three Push Buttons (Each Momentary Contact) GREEN, RED D2CG8B9 3/4” & BLACK BUTTONS 1For 3/4” FEED-THRU, change G2 or G8 in catalog number to G5. Example D2CG2B1 becomes D2CG5B1. For other hub sizes, see page C4. 2Specify pilot light lens marking or blank button marking if required. LEGEND2 BLANK, START, STOP START, STOP, BLANK C C4 D2C SERIES • CONTROLS E N C L O S U R E S , E N T RY F I T T I N G S , A C C E S S O R I E S , L E G E N D S PWCG10 D2CCG12 PWBG SIZE 1 PWCG20 D2CCG23 D2CCG24 PWBG SIZE 2 D2CCG11 F E AT U R E S - S P E C I F I C AT I O N S SIZE 1 BOXES SIZE 2 BOXES Catalog Number PWBG0 PWBG1 PWBG2 PWBG3 PWBG4 PWBG5 PWBG6 PWBG25 PWBG26 PWBG27 PWBG37 PWBG38 PWBG39 Description Blank - No Entries w/1/2” NPT hub, dead end w/3/4” NPT hub, dead end w/1” NPT hub, dead end w/1/2” NPT hubs, feed thru w/3/4” NPT hubs, feed thru w/1” NPT hubs, feed thru w/clearance hole, 1/2” NPS w/clearance hole, 3/4” NPS w/clearance hole, 1” NPS w/clearance hole, M2O w/clearance hole, M25 w/clearance hole, M32 SIZE 1 COVERS Catalog Number PWBG00 PWBG7 PWBG8 PWBG9 PWBG10 PWBG11 PWBG12 PWBG31 PWBG32 PWBG33 PWBG43 PWBG44 PWBG45 Description Blank - No Entries w/1/2” NPT hub, dead end w/3/4” NPT hub, dead end w/1” NPT hub, dead end w/1/2” NPT hubs, feed thru w/3/4” NPT hubs, feed thru w/1” NPT hubs, feed thru w/clearance hole, 1/2” NPS w/clearance hole, 3/4” NPS w/clearance hole, 1” NPS w/clearance hole, M20 w/clearance hole, M25 w/clearance hole, M32 SIZE 2 COVERS PWCG10 D2CCG11 D2CCG12 Blank-no device openings w/1 device opening 30mm w/2 device openings 30mm PWCG20 D2CG23 D2CG24* Blank-no device openings w/3 device openingS 30mm w/4 device openings 30mm * Space restrictions may apply for feed thru conduit entries. ENTRY FITTINGS** & ACCESSORIES Catalog Number WH-1G WH-2G WH-3G YOCCHP YOCCLOAX YOCCLOAM YOCCLOAP YOCCLOAFC Description Hub w/grounding locknut 1/2” NPT Hub w/grounding locknut 3/4” NPT Hub w/grounding locknut 1” NPT Hole plug for 30mm operator Lockout for half shroud momentary buttons Lockout for momentary mushroom buttons Lockout for maintained mushroom buttons Lockout cover (clear) for buttons or switches ** For other entry openings, contact factory. LEGEND PLATES*** Blue plate with white lettering - add to end of base catalog number YOCCLPBE. Example YOCCLPBE02. 02 = 03 = 04 = 07 = 14 = 15 = 16 = 17 = 18 = CLOSE DOWN EMERGENCY STOP FORWARD OPEN POWER OFF POWER ON PUSH TO TEST RESET 19 = 20 = 22 = 23 = 24 = 25 = 30 = 56 = 83 = REVERSE RUN START STOP TEST UP PUSH TO RESET OFF - ON HAND - OFF - AUTO Blank plates for engraving - add to end of base catalog number YOCCLP. Example YOCCLPBE00. WE00 = White Plate BE00 = Blue Plate YW00 = Yellow Plate GN00 = Green Plate 00 = Black Plate RD00 = Red Plate *** contact factory for additional selections. C5 D2C SERIES • CONTROLS C O N T R O L O P E R AT O R S , C O N TA C T B L O C K S Push Button - Momentary Rotary Switch Factory Sealed Contact Block 1 N.O./1 N.C. Mushroom - Maintained Pilot Light - LED F E AT U R E S - S P E C I F I C AT I O N S Momentary Push Button Operators* Catalog Number D2CO1KX3 D2CO1GX3 D2CO1RX3 D2CO1KH3 D2CO1GH3 D2CO1RH3 D2CO1KM3 D2CO1GM3 D2CO1RM3 Description Black Push Button Full Shroud Green Push Button Full Shroud Red Push Button Full Shroud Black Push Button Half Shroud Green Push Button Half Shroud Red Push Button Half Shroud Black Push Button Mushroom Green Push Button Mushroom Red Push Button Mushroom Maintained Mushroom Push Button Operators* D2COM1K3 D2COM1G3 D2COM1R3 D2COT1R3 Black Push-Pull Mushroom Green Push-Pull Mushroom Red Push-Pull Mushroom Red Twist to Release Mushroom Rotary Selector Switch Operators* D2CO52A3 D2CO53C3 D2CO63 D2CO73 D2CO143 D2CO153 Maintained 2-Position Maintained 3-Position Momentary Right, 2-Position Maintained Center 3-Position Maintained Left & Center 3-Position Maintained Right & Center 3-Position * Operators supplied with one universal factory sealed 1 N.O. + 1 N.C. contact block. For operator provided with two contact blocks, change last digit (3) of catalog number to 8. For actuator only, change (3) to O. LED Pilot Light Devices Add to end A23 = A4 = AMV = B23 = B4 = BMV = C23 = C4 = CMV = G23 = G4 = GMV = R23 = R25R = R25T = R4 = RMV = W23 = W4 = WMV = of base catalog number D2CO3. Example D2CO3A23. Amber 120V AC/DC Amber 24V AC/DC Amber Multi-voltage 20V-254V AC/DC Blue 120V AC/DC Blue 24V AC/DC Blue Multi-voltage 20V-254V AC/DC Clear 120V AC/DC Clear 24V AC/DC Clear Multi-voltage 20V-254V AC/DC Green 120V AC/DC Green 24V AC/DC Green Multi-voltage 20V-254V AC/DC Red 120V AC/DC Red 480VAC/DC resistor Red 480VAC transformer Red 24V AC/DC Red multi-voltage 20V-254V AC/DC White frosted 120V AC/DC White frosted 24V AC/DC White frosted Multi-voltage 20V-254V AC/DC Factory Sealed Contact Block Catalog Number D2CU (add suffix R for rotary selector switches) Description Factory Sealed Contact Block 1 Normally Open and 1 Normally closed Diagram Hazardous Rating: Class I, Division 2, Groups A,B,C,D; Class I, Zone 2, Groups IIB+H2, IIA, T6 Terminal Capacity: 22 thru 12 AWG [0.5-2.5mm2] copper, solid or standed conductors. Tightening torque 7 in-lbs. (tolerance +3.0/0.0) [~ 0.8Nm] Contact Electrical Ratings: NEMA A600- 7200 VA (Make), 720 VA (Break), 10 Amps Cont. @600V AC (Thermal) NEMA Q300- 69 VA (Make & Break), 2.5 Amps Cont. @250V DC (Thermal) C C6 D2C SERIES • CONTROLS C U S T O M S TAT I O N S O R D E R I N G F O R M , E N C L O S U R E D I M E N S I O N S Design your own DuraTech configuration from components by completing the following: ® 1 Box Size 2 1/2 3/4 1 Hub Size 1/2 3/4 1 Clearance Hole NPS 1 Cover Size Dead End Feed Thru M20 M25 M32 Metric 1 2 Number of Devices 2 3 4 Select Devices From Top (Position 1) to Bottom Device Nameplate Position 1_ ________________________________________________________________________________________________________________________________ Position 2_ ________________________________________________________________________________________________________________________________ Position 3_ ________________________________________________________________________________________________________________________________ Position 4_ ________________________________________________________________________________________________________________________________ Options C7 D2C SERIES • CONTROLS C O N T R O L S O P E R AT O R D I M E N S I O N S Operators bought separately are provided with gaskets to accommodate panel thickness for D2C series enclosures. Full-Shrouded Momentary Push Button Operator (53) (11) Half-Shrouded Button (63) (53) (53) (63) (21) Mushroom Push Button Selector Switch Device Pilot Light Multi-Voltage 20V-240V AC/DC Pilot Light 120V AC (Full Voltage) C Legend Plate C8 CS SERIES • CONTROLS C O N T R O L S TAT I O N S Class I, Div. 2, Groups A,B,C,D Class l, Zones 1 & 2, Groups IIC, llB, llA Class II, Div. 1 & 2, Groups E,F,G1 Class III NEMA 3, 4, 4x (A)Ex de IIC T6 IP66 FRP Enclosure Stainless Steel Enclosure F E AT U R E S - S P E C I F I C AT I O N S Applications Hazardous and corrosive environments such as refineries, chemical plants, water treatment and bio gas plants, and wherever a combustible gas-air mixture or combustible dust may occur. Features • Enclosures of Fiberglass Reinforced Polyester or Stainless Steel. • Durable EPDM gasket on enclosure is concealed to protect it from damage or premature aging by UV light and chemical elements • Snap-on mounting of individual explosion-protected control components to notched DIN-like rail • Contact element utilizes a parallel bridge contact with a four point (H- contact) to ensure the utmost reliability even with very low control voltages and currents • Fluorosilicate gasket in standard pushbutton actuators is suitable for a wide range of atmospheric conditions (-50°C to 40°C) • LED Pilot lights (incorporating advanced voltage-sensing electronics) operate on any voltage from 20V- 254V, AC or DC • Control switches in many configurations • Illuminated (Push-To-Test) push buttons, ammeters, potentiometers and other control components available • No external seals required for most applications Two Types of Enclosure Materials • Fiberglass Reinforced Polyester (FRP) • 316L Stainless Steel “THE” Standard in Hazardous Location Control Integral Mounting Slots (holes) Explosion Protected LED Pilot Light Recessed EPDM Gasketing Component Mounting Rail Spring Washer & Retainer Nut Pilot Light Bezel RUN Station I.D. Label (optional) Ground Plate With Terminals Explosion Protected Contact Block Conduit Hub or Cable Gland Entry Stainless Steel Cover Screws Actuator Gasket Dual Push-Button Actuator 1CSA Certified for Class II, Div. 1&2, EFG. UL LIsted for Class II, Div. 2, FG. Easy Change-out Components Snap in Place C9 CS SERIES • CONTROLS C O N T R O L S TAT I O N S - S TA N D A R D C O N F I G U R AT I O N S Start Push Button Station Start/Stop Push Button Station Class I, Div. 2, Groups A,B,C,D Class l, Zones 1 & 2, Groups IIC, llB, llA Class II, Div. 1 & 2, Groups E,F,G1 Class III NEMA 3, 4, 4X (A)Ex de IICT6 IP66 Pilot Light Station E-Stop Push Button Station F E AT U R E S - S P E C I F I C AT I O N S C S M O M E N TA R Y S I N G L E P U S H B U T T O N CATALOG NUMBER The control stations on this page are the most commonly used configurations, including combinations of pilot lights and push buttons. CONTACT ARRANGEMENT IEC NEMA 23 11 24 12 CSF124UO11 CSS124UO11 CONTACT BLOCKS BUTTON COLOR NAMEPLATE MARKING 1 N.O. / 1 N.C. Green CONTACT BLOCKS BUTTON COLOR 1 N.O. / 1 N.C. Green Start 1 N.O. / 1 N.C. Red Stop Start Wiring Entry Logic Insert one of the digits below to complete the control station catalog number. C S M O M E N TA R Y S TA R T- S T O P P U S H B U T T O N S CATALOG NUMBER CONTACT ARRANGEMENT IEC B O X E S W I T H I N T E R N A L G R O U N D P L AT E (for MC/TC/TEC Cable Connectors) 23 CSF224UO11UO12 1/2" NPT Top Feed A 1/2" NPT Bottom Feed B 1/2" NPT Feed Through C 3/4" NPT Top Feed D 3/4" NPT Bottom Feed E 3/4" NPT Feed Through F BOXES WITH CONDUIT HUB 1/2" NPT Top Feed 0 1/2" NPT Bottom Feed 1 1/2" NPT Feed Through 2 3/4" NPT Top Feed 3 3/4" NPT Bottom Feed 4 3/4" NPT Feed Through 5 B O X E S W I T H N O N - METALLIC CABLE GLAND (Standard for IEC/CENELEC) CSS224UO11UO12 NAMEPLATE MARKING 11 24 12 23 11 24 12 START STOP C S M A I N TA I N E D E M E R G E N C Y S T O P P U S H B U T T O N CATALOG NUMBER CSF124C150 CONTACT ARRANGEMENT IEC NEMA 12 I-0 11 CONTACT BLOCKS BUTTON COLOR NAMEPLATE MARKING 2 N.C. Red Large VOLT COLOR NAMEPLATE MARKING Red LED — C 22 CSS124C150 E-Stop 21 CS SINGLE PILOT LIGHT CATALOG NUMBER M25 Compression Gland Top Feed 6 M25 Compression Gland Bottom Feed 7 CSF124PLRO M25 Compression Gland Feed Through 8 CSS124PLRO Special 9 1CSA Certified for Class II, Div. 1&2, EFG. UL Listed for Class II, Div. 2, FG. NEMA CONTACT ARRANGEMENT IEC X1 NEMA X2 • • 20V-254V AC / DC Wiring entry: 4=3/4" NPT Bottom Feed. For other entries, see Wiring Entry Logic table at left. Housing material: (F) FRP, (S) Stainless Steel. C10 CS SERIES • CONTROLS C O N T R O L S TAT I O N S - S TA N D A R D C O N F I G U R AT I O N S Pilot Light & 2 Push Button Station Pilot Light & Start/Stop Push Button Station Selector Switch Station Class I, Div. 2, Groups A,B,C,D Class l, Zones 1 & 2, Groups IIC, llB, llA Class II, Div. 1 & 2, Groups E,F,G1 Class III NEMA 3, 4, 4X (A)Ex de IICT6 IP66 Pilot Light and Selector Switch Station F E AT U R E S - S P E C I F I C AT I O N S C S P I L O T L I G H T ( R E D L E D ) / M O M E N TA R Y D O U B L E P U S H B U T T O N S CATALOG NUMBER CONTACT ARRANGEMENT IEC CONTACT BLOCKS VOLT NEMA The control stations on this page are the most commonly used configurations, including combinations of pilot lights, push buttons and selector switches. CSF224PLROU231 23 CSS224PLROU231 24 11 Wiring Entry Logic C S P I L O T L I G H T ( R E D L E D ) / M O M E N TA R Y S TA R T- S T O P P U S H B U T T O N S Insert one of the digits below to complete the control station catalog number. B O X E S W I T H I N T E R N A L G R O U N D P L AT E (for MC/TC/TEC Cable Connectors) 1/2" NPT Top Feed START STOP 20V-254V, AC/DC B 1/2" NPT Feed Through C 3/4" NPT Top Feed D 3/4" NPT Bottom Feed E 3/4" NPT Feed Through F BOXES WITH CONDUIT HUB CATALOG NUMBER CONTACT ARRANGEMENT IEC 0 1/2" NPT Bottom Feed 1 1/2" NPT Feed Through 2 3/4" NPT Top Feed 3 3/4" NPT Bottom Feed 4 3/4" NPT Feed Through 5 X1 X2 23 11 CSS334PLROU011U012 24 23 12 24 12 CATALOG NUMBER 6 M25 Compression Gland Bottom Feed 7 M25 Compression Gland Feed Through 8 Special 9 Stop 11 START STOP CONTACT BLOCKS BUTTON NAMEPLATE COLOR MARKING 1 N.O. / 1 N.C. Green Start 1 N.O. / 1 N.C. Red Stop 20V-254V, AC/DC CONTACT ARRANGEMENT IEC 45° 13 23 CONTACT BLOCKS BUTTON COLOR 2-Pos./2-Pole — NEMA 135° 14 24 OFF NAMEPLATE MARKING ON 13 23 ° ° CSS124NO21 Off-On ° ° 14 24 C S M A I N TA I N E D 3 - P O S I T I O N S E L E C T O R S W I T C H CATALOG NUMBER CSF124N273 M25 Compression Gland Top Feed Red C S M A I N TA I N E D 2 - P O S I T I O N S E L E C T O R S W I T C H B O X E S W I T H N O N - M E TA L L I C CABLE GLAND (Standard for IEC/CENELEC) Start 1 N.O./1 N.C. VOLT NEMA CSF334PLROU011U012 CSF124NO21 1/2" NPT Top Feed Green 12 A 1/2" NPT Bottom Feed 1CSA Certified for Class II, Div. 1&2, EFG. UL LIsted for Class II, Div. 2, FG. X2 X1 BUTTON NAMEPLATE COLOR MARKING CSS124N273 CONTACT ARRANGEMENT IEC CONTACT BLOCKS BUTTON COLOR 3-Pos./2-Pole — NEMA 45° 135° 12 11 4 23 24 90° 11 23 ° ° HAND OFF NAMEPLATE MARKING AUTO H-O-A ° ° 12 24 C S P I L O T L I G H T / M A I N TA I N E D 2 - P O S I T I O N S E L E C T O R S W I T C H CATALOG NUMBER CSF224PLRON021 CSS224PLRON021 CONTACT ARRANGEMENT IEC 45° 13 23 • VOLT NEMA 135° 14 24 13 23 ° ° OFF • ON CONTACT BLOCKS 20V-254V, AC/DC 2-Pos./2-Pole COLOR Red LED NAMEPLATE MARKING Off-On ° ° 14 24 Wiring entry: 4=3/4" NPT Bottom Feed. For other entries, see Wiring Entry Logic table at left. Housing material: (F) FRP, (S) Stainless Steel. C11 CS SERIES • CONTROLS C O N T R O L S TAT I O N S D I M E N S I O N A L D ATA FRP Enclosure Stainless Steel Enclosure F E AT U R E S - S P E C I F I C AT I O N S FRP Dimensions 3.1" (80) 2.8" (70) 3.78 (97) .43" (11) 0.2" (5.5) 0.3" (7) 3.1" (80) 2.8" (70) 0.2" (5.5) 0.3" (7) 3.1" (80) 2.8" (70) B 0.3" (7) 3.7" (94) 5.5" (139) B ø 0.2" ø (5.5) ø 0.2" ø (5.5) A ø 0.2" (ø 5.5) 1.9" (48) 3.7" (93) B 7.3" (185) A A 5.5" (140) 0.2" (5.5) 0.2" (5.5) 0.2" (5.5) 0.2" (5.5) CSF 33 CSF12/CSF 22 CSF 11 Compact CSF Deep for 4 Pole Switches C CSS 12 CSS 22 8.9” (226) 8.2” (207) Steel Dimensions CSS 33 C12 FXCS SERIES • CONTROLS FA C T O RY S E A L E D C O N T R O L S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 7(C,D) 9(E,F,G) Listed - File E53360 Certified - File LR11714 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S SEAL-X® Applications SEAL-X® Series Factory Sealed push button stations, selector switches, pilot lights and tumbler switches are used to prevent the igniting of external hazardous atmospheres by the enclosed arcing devices in such areas as: • Hazardous locations due to the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers or flyings • Installations at petroleum refineries, chemical and petrochemical plants and other processing or storage facilities where similar hazards exist • Use in conjunction with magnetic starters or contactors for remote control of motors Features • Elimination of external sealing requirements • Lower installation cost • NEMA 3 weatherproof • Color coded wiring-more wiring space-easier field installation • Stainless steel captive screws for cover assembly • Ground boss for grounding in the splice box • Device bodies and covers are cast copper-free aluminum alloy • Cast conduit hubs 1/2", 3/4" and 1" either dead end or feed through standard in both single and two gang assemblies • Push button, selector switches and pilot light bodies are copper-free aluminum • Operating shaft in both push buttons and selector switches are stainless steel • Miniature and standard size push buttons. (Miniature 3/4" overall diameter, standard 1 3/8" overall diameter) Factory Sealed devices eliminate the need for external sealing. The difference is the use of a sealing plate between the arcing device and the junction box. The sealing plate confines ignited gases, vapors, flames, or dust to the arcing device chamber, preventing them from traveling through the conduit system. Accurately ground flanges on both sides of the sealing plate provide flame-tight joints. Factory poured seals around the wiring pigtails insure safe sealing. (FXCS Series) Electrical Rating Push button stations, selector switches 600 VAC max. heavy duty. C O N TA C T B L O C K R AT I N G S CURRENT 120 VAC 240 VAC 480 VAC 600 VAC INRUSH 60 30 BREAKING 6 3 CARRYING 10 10 15 12 1.5 1.2 10 10 D C R AT I N G S ( M A X . A M P S ) CURRENT 125 VDC INRUSH .55 BREAKING .55 CARRYING 2.50 250 VDC .275 .275 2.50 M O D I F I C AT I O N S SUFFIX NUMBER DESCRIPTION AL Pilot light lens-amber CL Pilot light lens-clear GL Pilot light lens-green RL Pilot light lens-red MR Mushroom headPush button (red) LO Push button LOCKOUT 1 LOP Selector switch-padlock LOCKOUT 1 LOCKOUT must be installed at the factory. LED lamps available. See page C39. C13 FXB SERIES • CONTROLS FA C T O RY S E A L E D S P L I C E B O X E S / S E A L I N G M E T H O D S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llB, llA Class II, Div. I & 2, Groups E,F,G Class Ill NEMA 3, 7(C,D) 9(E,F,G) Listed - File E53360 FXB-2 Dead End FXB-5 Feed Thru FXB-8 Double Gang Dead End Certified- File LR11714 FXB-11 Double Gang Feed Thru See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Splice Boxes The FXB Series of splice boxes are designed for use with the FXCS and FXS Series of cover sub-assemblies. FXB BACK BOX SELECTION AND DIMENSIONS CATALOG NUMBER DESCRIPTION EXTERNAL HUB SIZE LENGTH WIDTH MOUNTING DEPTH VERTICAL HORIZONTAL FXB-1 Single gang/Dead-end 1/2" 6-13/16" 3-11/16" 1-3/4" 6-3/16" 2-1/4" FXB-2 Single gang/Dead-end 3/4" 6-13/16" 3-11/16" 1-3/4" 6-3/16" 2-1/4" FXB-3 Single gang/Dead-end 1" 6-13/16" 3-11/16" 1-3/4" 6-3/16" 2-1/4" FXB-4 Single gang/Feed-thru 1/2" 6-13/16" 3-11/16" 1-3/4" 6-3/16" 2-1/4" FXB-5 Single gang/Feed-thru 3/4" 6-13/16" 3-11/16" 1-3/4" 6-3/16" 2-1/4" FXB-6 Single gang/Feed-thru 1" 6-13/16" 3-11/16" 1-3/4" 6-3/16" 2-1/4" FXB-7 Double gang/Dead-end 1/2" 6-13/16" 7-17/32" 2 6-3/16" 2-1/4" FXB-8 Double gang/Dead-end 3/4" 6-13/16" 7-17/32" 2 6-3/16" 2-1/4" FXB-9 Double gang/Dead-end 1" 7 7-17/32" 2 6-3/16" 2-1/4" FXB-10 Double gang/Feed-thru 1/2" 6-13/16" 7-17/32" 2 6-3/16" 2-1/4" FXB-11 Double gang/Feed-thru 3/4" 6-13/16" 7-17/32" 2 6-3/16" 2-1/4" FXB-12 Double gang/Feed-thru 1" 7 7-17/32" 2 6-3/16" 2-1/4" C C14 FXCS SERIES • CONTROLS FA C T O RY S E A L E D C O V E R A S S E M B L I E S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llB, llA Class II, Div. I & 2, Groups E,F,G Class Ill NEMA 3, 7(C,D) 9(E,F,G) Listed - File E53360 and/or E12379 Certified - File LR11714 Single Push Button Pilot Light Double Push Button See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S F X C S M O M E N TA R Y C O N TA C T S I N G L E P U S H B U T T O N COVER WITH DEVICE FXCS-0B1 FXCS-0B2 FXCS-0B3 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE FXCS-1B1 FXCS-4B1 1/2" FXCS-2B1 FXCS-5B1 3/4" FXCS-1B2 FXCS-4B2 1/2" FXCS-2B2 FXCS-5B2 3/4" FXCS-1B3 FXCS-4B3 1/2" FXCS-2B3 FXCS-5B3 3/4" BUTTON COLOR DIAGRAM NAMEPLATE MARKING 1 •• Green Start •• Red Stop •• •• Black Specify F X C S M O M E N TA R Y C O N TA C T D O U B L E P U S H B U T T O N CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU FXCS-0B4 FXCS-0B4-U FXCS-0B5 FXCS-0B7 HUB SIZE FXCS-1B4 FXCS-4B4 1/2" FXCS-2B4 FXCS-5B4 3/4" FXCS-1B4U FXCS-4B4-U 1/2" FXCS-2B4U FXCS-5B4-U 3/4" BUTTON COLOR DIAGRAM NAMEPLATE MARKING 1 •• •• Green/Red Start/Stop •• •• •• •• Green/Red Start/Stop FXCS-1B5 FXCS-4B5 1/2" FXCS-2B5 FXCS-5B5 3/4" •• •• Green/Green Start/Stop •• •• •• •• Black/Black Specify FXCS-1B7 FXCS-4B7 1/2" FXCS-2B7 FXCS-5B7 3/4" FXCS PILOT LIGHT COVER WITH DEVICE FXCS-0B24CL FXCS-0B24GL FXCS-0B24RL CATALOG NUMBER COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE FXCS-1B24CL FXCS-4B24CL 1/2" FXCS-2B24CL FXCS-5B24CL 3/4" FXCS-1B24GL FXCS-4B24GL 1/2" FXCS-2B24GL FXCS-5B24GL 3/4" FXCS-1B24RL FXCS-4B24RL 1/2" FXCS-2B24RL FXCS-5B24RL 3/4" DIAGRAM VOLT LENS COLOR 2 NAMEPLATE MARKING 1 120V Clear Specify 120V Green Specify 120V Red Specify 1 For other than standard marking, refer to the special feature section of price list. 2 Lens colors other than listed may be specified by changing lens color suffix. See modifications page C12. NOTE: Boxes and covers shipped separately. *For control stations with 1" conduit openings or for double gang assemblies, order cover with device and box as separate components. C15 FXCS SERIES • CONTROLS FA C T O RY S E A L E D C O N T R O L S TAT I O N C O V E R A S S E M B L I E S Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, IlA Class II, Div. I & 2, Groups E,F,G Class Ill NEMA 3, 7(C,D) 9(E,F,G) Double Pilot Lights Pilot Light Two Mini Push Buttons Pilot Light Push Button Listed - File E53360 and /or E12379 Maintained Push Button Certified - File LR11714 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S FXCS DOUBLE PILOT LIGHTS CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU HUB SIZE FXCS-1B30CL FXCS-4B30CL 1/2" FXCS-2B30CL FXCS-5B30CL 3/4" FXCS-1B30GL FXCS-4B30GL 1/2" FXCS-2B30GL FXCS-5B30GL 3/4" FXCS-0B30CL FXCS-0B30GL FXCS-0B30RL FXCS-0B30RL-GL FXCS-1B30RL FXCS-4B30RL 1/2" FXCS-2B30RL FXCS-5B30RL 3/4" FXCS-1B30RL-GL FXCS-4B30RL-GL 1/2" FXCS-2B30RL-GL FXCS-5B30RL-GL 3/4" LAMP VOLTS DIAGRAM LENS COLOR 2 NAMEPLATE MARKING1 120V Clear Specify 120V Green Specify 120V Red Specify 120V Red/Green Specify F X C S M O M E N TA R Y C O N TA C T P U S H B U T T O N A N D P I L O T L I G H T CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU FXCS-0B13-C FXCS-0B13-O FXCS-0B13-U HUB SIZE FXCS-1B13-C FXCS-4B13-C 1/2" FXCS-2B13-C FXCS-5B13-C 3/4" FXCS-1B13-O FXCS-4B13-O 1/2" FXCS-2B13-O FXCS-5B13-O 3/4" FXCS-1B13-U FXCS-4B13-U 1/2" FXCS-2B13-U FXCS-5B13-U 3/4" DIAGRAM •• •• •• •• NAMEPLATE MARKING 1 LAMP VOLTS BUTTON COLOR 120V Red Clear Stop Specify 120V Green Green Start Specify 120V Black Red Specify Specify LENS COLOR 2 BUTTON LENS F X C S M O M E N TA R Y C O N TA C T 2 M I N I P U S H B U T T O N A N D 1 P I L O T L I G H T CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU FXCS-0A15 HUB SIZE FXCS-1A15 FXCS-4A15 1/2" FXCS-2A15 FXCS-5A15 3/4" DIAGRAM • •• • BUTTON COLOR Red/Green LENS COLOR2 Red 120 VAC NAMEPLATE MARKING1 BUTTON LENS Stop Start Specify F X C S M A I N TA I N E D C O N TA C T - P U S H / P U L L M U S H R O O M 4 BUTTON COLOR C O N TA C T T Y P E C O V E R A S S E M B LY C AT. # GREEN 1NO/1NC FXCS-OMMG3 RED 1NO/1NC FXCS-OMMR3 BLACK 1NO/1NC FXCS-OMMK3 C ATA L O G # W I T H L O C K O U T # N A M E P L AT E M A R K I N G FXCS-OMMR3-LOM 3 1 For other than standard marking, refer to the special feature section of price list. 2 Lens colors other than listed may be specified by changing lens color suffix. See modifications page C12. 3 Three nameplates supplied (Start/Stop, Blank, Emergency Stop) with FXCS maintained push button. 4 Operation-when push button is depressed and contacts activated, operator will remain in depressed position until pulled out to normal position. NOTE: Boxes and covers shipped separately. *For control stations with 1" conduit opening or for double gang assemblies, order cover with device and box as separate components. C C16 FXCS SERIES • CONTROLS FA C T O RY S E A L E D C O V E R A S S E M B L I E S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llB, lIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 7(C,D) 9(E,F,G) Listed - File E53360 and/or E12379 Certified - File LR11714 Key Selector Switch Selector Switch See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S F X C S T W O P O S I T I O N S E L E C T O R S W I T C H – M A I N TA I N E D C O N TA C T 1 CATALOG NUMBER HUB SIZE FXCS-0S2A1 1/2" STANDARD COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU FXCS-1S2A1 FXCS-4S2A1 FXCS-0S2A1 3/4" FXCS-2S2A1 FXCS-5S2A1 FXCS-0S2A5 1/2" FXCS-1S2A5 FXCS-4S2A5 FXCS-0S2A5 3/4" FXCS-2S2A5 FXCS-5S2A5 KEYED COVER WITH DEVICE FXCS-0K2A1 FXCS-0K2A5 LEFT POSITION KEYED COMPLETE UNITS 2 (BOX & COVER) DEAD-END FEED-THRU FXCS-1K2A1 FXCS-4K2A1 LEFT CONTACT FXCS-2K2A1 FXCS-5K2A1 •• •• •• FXCS-1K2A5 FXCS-4K2A5 FXCS-2K2A5 FXCS-5K2A5 RIGHT POSITION LEFT CONTACT RIGHT CONTACT •• •• STANDARD COVER WITH DEVICE RIGHT CONTACT •• •• •• •• •• •• •• F X C S T H R E E P O S I T I O N S E L E C T O R S W I T C H – M A I N TA I N E D C O N TA C T 1 FXCS-0S3C4 1/2" FXCS-0S3C4 3/4" FXCS-2S3C4 FXCS-5S3C4 FXCS-0S3C5 1/2" FXCS-1S3C5 FXCS-4S3C5 FXCS-0S3C5 3/4" FXCS-2S3C5 FXCS-5S3C5 KEYED COVER WITH DEVICE FXCS-0K3C4 FXCS-0K3C5 LEFT POSITION CENTER POSITION RIGHT POSITION KEYED COMPLETE UNITS 2 LEFT RIGHT LEFT RIGHT LEFT RIGHT (BOX & COVER) CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT DEAD-END FEED-THRU FXCS-1K3C4 FXCS-4K3C4 FXCS-2K3C4 FXCS-5K3C4 FXCS-1K3C5 FXCS-4K3C5 FXCS-2K3C5 FXCS-5K3C5 •• •• • • • • • • • • •• • • • • •• •• •• • • • • • • • • HUB SIZE STANDARD COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU FXCS-1S3C4 FXCS-4S3C4 • • • • CATALOG NUMBER STANDARD COVER WITH DEVICE FXCS TWO POSITION SELECTOR SWITCH – SPRING RETURNED1 3/4" FXCS-2S2L3F FXCS-5S2L3F FXCS-OK2L3F22D KEYED COMPLETE UNITS 2 (BOX & COVER) DEAD-END FEED-THRU FXCS-1K2L3F22D FXCS-4K2L3F22D FXCS-2K2L3F22D FXCS-5K2L3F22D LEFT POSITION LEFT CONTACT RIGHT POSITION RIGHT CONTACT •• •• LEFT CONTACT RIGHT CONTACT •• 1/2" FXCS-0S2L3F HUB SIZE •• FXCS-0S2L3F CATALOG NUMBER STANDARD KEYED COMPLETE UNITS COVER (BOX & COVER) WITH DEVICE DEAD-END FEED-THRU FXCS-1S2L3F FXCS-4S2L3F STANDARD COVER WITH DEVICE TYPE OPERATION — Spring return to left from right — Maintained in left — 1 N.O. Contact — 1 N.C. Contact FXCS THREE POSITION SELECTOR SWITCH – SPRING RETURNED1 FXCS-5S3M6G FXCS-0S3L6G 1/2” FXCS-1S3L6G FXCS-4S3L6G FXCS-0S3L6G 3/4” FXCS -2S3L6G FXCS-5S3L6G FXCS-0S3R6G 1/2” FXCS-1S3R6G FXCS-4S3R6G FXCS-0S3R6G 3/4” FXCS-2S3R6G FXCS-5S3R6G FXCS-0K3M6G32D FXCS-1K3M6G32D FXCS-4K3M6G32D FXCS-2K3M6G32D FXCS-5K3M6G32D FXCS-0K3L6G32D FXCS-0K3R6G32D 1Nameplates are double sided. FXCS-1K3L6G32D FXCS-4K3L6G32D FXCS-2K3L6G32D FXCS-5K3L6G32D FXCS-1K3R6G32D FXCS-4K3R6G32D FXCS-2K3R6G32D FXCS-5K3R6G32D •• LEFT CONTACT •• RIGHT POSITION RIGHT CONTACT LEFT CONTACT RIGHT CONTACT •• •• TYPE OPERATION — Spring return to center from left or right — Maintained in center — 2 N.O. Contacts •• •• •• •• TYPE OPERATION — Spring return to center from right — Maintained center and left 2 N.O. Contacts •• FXCS-4S3M6G FXCS-2S3M6G RIGHT CONTACT CENTER POSITION •• •• •• •• •• FXCS-1S3M6G 3/4” LEFT CONTACT •• 1/2” FXCS-0S3M6G LEFT POSITION •• FXCS-0S3M6G KEYED COMPLETE UNITS 2 (BOX & COVER) DEAD-END FEED-THRU •• HUB SIZE •• CATALOG NUMBER STANDARD KEYED COMPLETE UNITS COVER WITH (BOX & COVER) DEVICE DEAD-END FEED-THRU STANDARD COVER WITH DEVICE TYPE OPERATION — Spring return to center from left — Maintained center and right 2 N.O. Contacts For other than standard marking, refer to the special feature section of the price list. STANDARD NAMEPLATE MARKINGS — 2 POSITION — Blank or Off-On — 3 POSITION — Blank or Hand-Off-Auto. 2Key operated selector switches are randomly keyed with keys removable in all positions. For keyed alike or key removable in other than all positions contact factory. For control stations with 1" conduit opening or for double gang assemblies, order cover with device and box as separate components. C17 FXS SERIES • CONTROLS FA C T O RY S E A L E D T U M B L E R S W I T C H E S A N D G R O U N D FA U LT I N T E R R U P T E R For GFI Protection with receptacle, See page PR26 Class I, Div. I & 2, Groups C,D Class l, Zones 1 & 2, Groups llB,llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 7(C,D) 9(E,F,G) Ground Fault Interrupter Tumbler Switches F E AT U R E S - S P E C I F I C AT I O N S Applications FXS Tumbler Switches are suitable for applications where making, breaking or changing connections in an electrical circuit is required and where conditions of load do not exceed the switch ratings. Listed - File E53360 and/or Ffile E10501 Certified - File LR11714 FXS TUMBLER SWITCHES CATALOG NUMBER COMPLETE UNIT COVER (BOX, COVER AND SWITCH) WITH SWITCH DEAD-END FEED-THRU FXS-1C FXS-2C See files for details or call Killark. Applications FXS Ground Fault Interrupters are designed to interrupt a circuit when a ground fault is detected on equipment which may be handled by personnel in hazardous locations. FXS-8C Features • Test and Reset push buttons are provided on cover assembly. Unit should be tested monthly • Includes new GFI to meet latest UL943 GFCI standards revisions • Exterior gasket provides NEMA 3 weatherproof protection • Ground boss for grounding in the splice box • Color coded wiring • Captive cover bolts are made from stainless steel FXS-6C Electrical Rating GFI units are rated at 20A, 120 VAC, 60HZ. Class A. 4-6 miliamp trip setting Trip Time-UL Curve Listed - File E80595 FXS-3C FXS-5C FXS-1D FXS-2D FXS-4C SWITCH STYLE HUB SIZE FXS-11C FXS-41C 1/2" FXS-21C FXS-51C 3/4" FXS-12C FXS-42C 1/2" FXS-22C FXS-52C 3/4" FXS-18C FXS-48C 1/2" FXS-28C FXS-58C 3/4" FXS-13C FXS-43C 1/2" FXS-23C FXS-53C 3/4" FXS-15C FXS-45C 1/2" FXS-25C FXS-55C 3/4" FXS-16C FXS-46C 1/2" FXS-26C FXS-56C 3/4" FXS-11D FXS-41D 1/2" FXS-21D FXS-51D 3/4" FXS-12D FXS-42D 1/2" FXS-22D FXS-52D 3/4" — — — SWITCH RATING 120/277 VAC, 1Ø 1-POLE 20 A 2 2-POLE 20 A 2 3-POLE 1 3-WAY/ SPDT (No off) 20 A 2 SPDT (Center off) 20 A 2 DPDT (No off) 20 A 2 1-POLE 30 A 2 2-POLE 30 A 2 4-WAY 20 A 2 1 Rated 15 amperes, 240/480 VAC., 3Ø; 3HP-240 VAC., 5 HP-480 VAC. 2 Horsepower rated 1 HP at 120 VAC, 2 HP at 240 VAC. F X S G R O U N D F A U LT I N T E R R U P T E R † CATALOG NUMBER COMPLETE UNIT COVER ASSEMBLY FXS-GFI-1020 FXS-GFIO3 FXB-1 FXS-GFI-2020 FXS-GFIO3 FXB-2 FXS-GFI-3020 FXS-GFIO3 FXB-3 FXS-GFI-1120 FXS-GFIO3 FXB-4 FXS-GFI-2120 FXS-GFIO3 FXB-5 FXS-GFI-3120 FXS-GFIO3 FXB-6 HUB SIZE BACK BOX* 1/2" DEAD END FEED THRU 3/4" 1" 1/2" 3/4" 1" For control stations with 1" conduit opening or for double gang assemblies, order cover with device and box as separate components. *Boxes and covers shipped separately. Certified - File LR61895 C †See page DE25 for additional ground fault control stations. See files for details or call Killark. F X S G R O U N D F A U LT I N T E R R U P T E R W I T H L E D L A M P CATALOG NUMBER FOR COVER ASSEMBLY * Order FXB back box as seperate item. FXS-GFIO3PL C18 XCS/XS/SWB SERIES • CONTROLS C O N T R O L S TAT I O N S E X T E R N A L S E A L I N G R E Q U I R E D Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Listed - File E53360 Certified - File LR11714, LR11712 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Applications • Hazardous locations due to the presence of flammable gases or vapors, combustible dusts or easily ignitable fiber or flyings • Installations at petroleum refineries, chemical and petrochemical plants and other processing or storage facilities where similar hazards exist • Use in conjunction with magnetic starters or contactors for remote control of motors Features • Device bodies and covers are cast copperfree Aluminum alloy and provide a wide assortment for custom assemblies • Cast conduit hubs 1/2", 3/4" and 1" either dead end or feed thru standard in both single and two gang, SWB-1 thru SWB-12 device bodies • SWB-13 thru SWB-38 are designed for custom drilled and tapped conduit openings on all four sides and the back • Ground flange joint between bolted cover and box provide required flame path • Push button, selector switches and pilot light operator bodies are copper-free aluminum • Operating shaft in both push buttons and selector switches are stainless steel • Open space between gangs for easy wiring from one cover to another • Miniature and standard size push buttons. (Miniature 3/4" overall diameter, standard 1-3/8" overall diameter.) • Contact blocks are rated heavy duty, 600 VAC max • Internal ground screw Electrical Rating Push button stations, selector switches heavy duty 600 VAC max. Pilot lights 120 VAC. XCS Special Assemblies To order XCS cover assemblies for use with multi-gang or 1" hub type SWB Series splice boxes, simply order as follows: Example: XCS-0B1 — Cover Assembly SWB-6 — Splice box with 1" feed thru hubs Example: XCS-0B1 — Cover Assembly XCS-0B24RL— Cover Assembly SWB-12 — Double gang splice box NOTE: Splice boxes and cover assemblies are packaged in separate cartons. C O N TA C T B L O C K R AT I N G S CURRENT 120 VAC 240 VAC 480 VAC 600 VAC INRUSH 60 30 BREAKING 6 3 CARRYING 10 10 15 12 1.5 1.2 10 10 D C R AT I N G S ( M A X . A M P S ) CURRENT 125 VAC 250 VAC INRUSH .55 .275 BREAKING .55 CARRYING 2.50 .275 2.50 M O D I F I C AT I O N S CATALOG SUFFIX DESCRIPTION AL Pilot light lens-amber CL Pilot light lens-clear GL Pilot light lens-green RL Pilot light lens-red T2 1Pilot light transformer — 220/110VAC T4 1Pilot light transformer — 440/110VAC MR Mushroom head push button (red) LO Push button lockout2 LOP Selector switch padlock-lockout SU1 Stainless steel cover screws 1 One transformer required for each pilot light. Deep device bodies required for all except single pilot light units when transformers are used. 2 Push button lockout must be factory installed. LED lamps available. See page C39. SWB SERIES • CONTROLS DEVICE FODIES FOR USE WITH XCS/XS/XT COVER ASSEMBLIES Dead End SWB-1-2-3 3 Feed Thru SWB-4-5-6 3 Dead End SWB-7-8-9 3 Feed Thru SWB-10-11-12 3 C19 Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Listed - File E53360 Certified - LR11712 SWB-13-14 SWB-17 SWB-18 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S SWB DEVICE BODIES AND DIMENSIONS SWB-19 SWB-20 SWB-21 CATALOG NUMBER SWB-1 SWB-2 SWB-3 SWB-4 SWB-5 SWB-6 SWB-7 SWB-8 SWB-9 SWB-10 SWB-11 SWB-12 SWB-13 SWB-14 SWB-17 SWB-18 SWB-19 SWB-20 SWB-21 SWB-32 SWB-33 SWB-34 SWB-38 SWB-42 SWB-45 SWB-49 SWB-32 HUB SIZE 1/2" 3/4" 1" 1/2" 3/4" 1" 1/2" 3/4" 1" 1/2" 3/4" 1" 1 2 1 2 2 2 2 2 2 2 2 3/4" 3/4" 3/4" LENGTH 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-7/8”(149) 5-7/8"(149) 5-7/8"(149) 5-7/8"(149) 5-1/4"(133) 5-1/4"(133) 10-3/8"(264) 5-1/4"(133) 5-1/4"(133) 5-1/4"(133) 5-1/4"(133) 12"(305) 10-3/8”(264) 12"(305) 17-1/8"(435) 5-1/4"(133) 5-1/4"(133) 5-1/4"(133) EXTERNAL WIDTH 3"(76) 3"(76) 3"(76) 3"(76) 3"(76) 3"(76) 6-1/2"(165) 6-1/2"(165) 6-1/2"(165) 6-1/2"(165) 6-1/2"(165) 6-1/2"(165) 3-5/8"(92) 3-5/8"(92) 3-5/8"(92) 7-1/8"(181) 10-5/8"(270) 14-1/8"(359) 17-5/8"(448) 10-5/8"(270) 14-1/8"(359) 17-3/4"(451) 17-3/4"(451) 3-5/8" (92) 3-5/8"(92) 3-5/8"(92) DEPTH 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/4"(57) 2-1/2"(64) 3-5/16"(84) 2-1/2"(64) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) 3-5/16"(84) MOUNTING VERTICAL HORIZONTAL 5-3/8"(137) 2-3/8"(60) 5-3/8"(137) 2-3/8"(60) 5-3/8"(137) 2-3/8"(60) 5-3/8"(137) 2-3/8"(60) 5-3/8"(137) 2-3/8"(60) 5-3/8"(137) 2-3/8"(60) 5-3/8"(137) 2-1/2"(64) 5-3/8"(137) 2-1/2"(64) 5-3/8"(137) 2-1/2"(64) 5-3/8"(137) 2-1/2"(64) 5-3/8"(137) 2-1/2"(64) 5-3/8"(137) 2-1/2"(64) 6-1/8"(156) 2-3/8"(60) 6-1/8"(156) 2-3/8"(60) 11-3/8"(289) 2-1/8"(54) 6"(152) 5-3/4"(146) 6"(152) 9-3/16"(233) 6"(152) 12-11/16"(322) 6"(152) 16-3/16"(411) 11-1/8"(283) 9-3/16"(233) 11-3/16"(284) 12-3/4"(324) 11-5/16"(287) 16-1/4"(413) 11-5/16"(287) 16-1/4"(413) 6-1/8"(156) 2-3/8"(60) 6-1/8"(156) 2-3/8"(60) 6-1/8"(156) 2-3/8"(60) C 1 Maximum size drilled and tapped opening 1" — Shallow device bodies. 2 Maximum size drilled and tapped opening 1-1/2" — Deep device bodies. 3SWB-1 thru SWB-12 Boxes have cast in conduit hubs. Additional conduit openings can not be included. Use SWB-13-14 or 18 for custom conduit requirements. See following page for custom conduit information. SWB-13 through SWB-38 boxes are blank without conduit openings and can be factory or field installed. See following page for custom conduit information. SWB-33 SWB-34 SWB-38 SWB-42 (3/4" Dead End) SWB-45 (3/4" Feed Thru) SWB-48 (Two 1/2"on Bottom) SWB-49 (Two 3/4"on Bottom) C20 SWB SERIES • CONTROLS C O N D U I T O P E N I N G D ATA Conduit Opening Location Charts C C 1 V 1 2 X T J V G L P SWB-17 A C E A B C D E V 1 2 3 4 5 J X T 1 2 3 4 5 6 X T G L R Q P O N 1 2 J 1 2 3 V SWB-19 A B D E A B C D E G L X T SWB-20 A B C D E 1 2 3 4 5 G 6 7 8 9 10 L X V T R Q P O N SWB-33 J R QPO N SWB-18 1 2 3 4 5 6 7 8 1 2 3 4 V J R P N R Q O N R P N SWB-32 SWB-21 A C E RPN P SWB-13-14 A BCD E AC E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 G J L N O P Q R SWB-38 SWB-34 F E AT U R E S - S P E C I F I C AT I O N S To specify conduit openings select the letter on these sketches which indicates the position desired. All conduit openings will be evenly spaced and located in the area indicated on the location chart. When they are to be more accurately located, submit a sketch with spacing dimensions. Specific conduit openings must be located dimensionally from box centerlines to conduit centerlines and from outside back surface of box to conduit centerline. Ordering Instructions: (1) Select the letter on location chart which indicates conduit opening position desired. (2) Select symbol number from chart which indicates conduit opening type and size. (3) Combine the conduit location letter, size and type number, and add as a suffix to SWB box catalog number. Example: SWB-18-C1-J1-P1-V1 M I N I M U M H U B C E N T E R S F O R D R I L L E D A N D TA P P E D A N D U N I O N H U B S SIZE 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" FORM 1 MIN 2 PRE 3 GU 1 MIN 2 PRE 3 GU 1 MIN 2 PRE 3 GU 1 MIN 2 PRE 3 GU 1 MIN 2 PRE 3 GU 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-3/16"(46) — — — — 1-3/8"(35) — — — — 1-5/8"(41) — — — — 1-3/8"(35) 1-1/2"(38) — — — 1-1/2"(38) 1-5/8"(41) — — — 1-3/4"(44) 1-13/16"(46) — — — 1-1/2"(38) 1-3/4"(44) 1-13/16"(46) — — 1-3/4"(44) 1-7/8"(48) 2"(51) — — 1-7/8"(48) 2"(51) 2-1/8"(54) — — 1-11/16"(43) 1-15/16"(49) 2-1/16"(52) 2-5/16"(59) — 1-15/16"(49) 2-1/16"(52) 2-1/4"(57) 2-1/2"(64) — 2-1/16"(52) 2-1/4"(57) 2-5/16"(59) 2-1/2"(64) — 1-15/16"(49) 2-1/16"(52) 2-3/16"(56) 2-1/2"(64) 2-5/8"(67) 2-1/8"(54) 2-1/4"(57) 2-3/8"(60) 2-5/8"(67) 2-3/4"(70) 2-3/16"(56) 2-9/32"(58) 7/16"(11) 2-5/8"(67) 2-3/4"(70) Locknut Bushing Conduit 1-1/8"(29) 1-3/8"(35) 1-11/16"(43) 2-3/16"(56) 2-7/16"(62) Locknut Bushing Conduit 1"(25) 1-1/4"(32) 1-1/2"(38) 1-7/8"(48) 2-1/8"(54) Locknut Bushing Conduit 7/8"(22) 1-1/16"(27) 1-3/8"(35) 1-11/16"(43) 1-15/16"(49) 1 Minimum spacing required to provide clearance over locknuts and bushings. 2 Preferred—more liberal spacings between centers of conduits to be used whenever possible. 3 GU—spacing required for GU Series unions. 4 Union hubs are supplied by using a drilled and tapped opening with GUM Series Union. SYMBOL NUMBERS CONDUIT SIZE 1/2" CONDUIT OPENINGS DRILLED UNION4 AND TAPPED 1 11 3/4" 2 12 1" 3 13 1-1/4" 4 14 1-1/2" 5 15 † Consult factory for special or additional conduit sizes, locations, and combinations required but not illustrated. C21 XCS SERIES • CONTROLS C O V E R A S S E M B L I E S • C O N T R O L S TAT I O N S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Listed - File E53360 Single Push Button Three Mini-Push Button Double Push Button Push-Pull Mushroom Maintained Push Button Certified - File LR11714 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S X C S M O M E N TA R Y C O N TA C T S I N G L E P U S H B U T T O N COVER WITH DEVICE XCS-0B1 XCS-0B2 XCS-0B3 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE XCS-1B1 XCS-4B1 1/2" XCS-2B1 XCS-5B1 3/4" XCS-1B2 XCS-4B2 1/2" XCS-2B2 XCS-5B2 3/4" BUTTON COLOR 2 DIAGRAM NAMEPLATE MARKING1 Green Start •• Red Stop Black Specify •• XCS-1B3 XCS-4B3 1/2" XCS-2B3 XCS-5B3 3/4" •• •• HUB SIZE DIAGRAM X C S M O M E N TA R Y C O N TA C T D O U B L E P U S H B U T T O N COVER WITH DEVICE XCS-0B4 XCS-0B4-U XCS-0B5 XCS-0B7 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU XCS-1B4 XCS-4B4 1/2" XCS-2B4 XCS-5B4 3/4" XCS-1B4-U XCS-4B4-U 1/2" XCS-2B4-U XCS-5B4-U 3/4" BUTTON COLOR 2 NAMEPLATE MARKING1 •• Green-Red Start/Stop •• •• •• •• Green-Red Start/Stop •• XCS-1B5 XCS-4B5 1/2" XCS-2B5 XCS-5B5 3/4" •• •• Green-Green Start/Start XCS-1B7 XCS-4B7 1/2" XCS-2B7 XCS-5B7 3/4" •• •• •• •• Black-Black Specify X C S M O M E N TA R Y C O N TA C T T H R E E M I N I P U S H B U T T O N S COVER WITH DEVICE XCS-0A8 XCS-0A9 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE XCS-1A8 XCS-4A8 1/2" XCS-2A8 XCS-5A8 3/4" XCS-1A9 XCS-4A9 1/2" XCS-2A9 XCS-5A9 3/4" BUTTON COLOR 2 DIAGRAM •• •• •• •• •• •• •• •• •• •• NAMEPLATE MARKING1 Green-Red Start/Stop Black Specify Black Specify 1 For other than standard marking, refer to the special feature section of price list. 2 Lens colors other than listed may be specified by changing lens color suffix. See modifications page C18. For control stations with 1" conduit openings or for multi-gang assemblies, order cover with devices and box as separate components. X C S M A I N TA I N E D C O N TA C T P U S H P U L L M U S H R O O M P U S H B U T T O N 4 CATALOG NUMBER (COVER WITH DEVICE) DIAGRAM XCS-OMMG3 XCS-OMMR3 XCS-OMMK3 •• •• BUTTON COLOR GREEN RED NAMEPLATE MARKING 3 BLACK 3 Three nameplates supplied (Start/Stop, Blank, Emergency Stop) with XCS maintained push button. 4 Operation - when push button is depressed and contact activated, operator will remain in depressed position until pulled out in normal position. C C22 XCS SERIES • CONTROLS C O V E R A S S E M B L I E S • C O N T R O L S TAT I O N S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Listed - File E53360 Pilot Light Double Pilot Light Pilot Light Push Button Certified - File LR11714 Pilot Light Two Mini Push Buttons See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S XCS PILOT LIGHT3 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU XCS-0B24CL XCS-0B24GL XCS-0B24RL HUB SIZE XCS-1B24CL XCS-4B24CL 1/2" XCS-2B24CL XCS-5B24CL 3/4" XCS-1B24GL XCS-4B24GL 1/2" XCS-2B24GL XCS-5B24GL 3/4" XCS-1B24RL XCS-4B24RL 1/2" XCS-2B24RL XCS-5B24RL 3/4" DIAGRAM LAMP VOLTS LENS COLOR2 NAMEPLATE MARKING1 120V Clear Specify 120V Green Specify 120V Red Specify XCS DOUBLE PILOT LIGHT4 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU XCS-0B30CL XCS-0B30GL XCS-0B30RL XCS-0B30RL-GL HUB SIZE XCS-1B30CL XCS-4B30CL 1/2" XCS-2B30CL XCS-5B30CL 3/4" XCS-1B30GL XCS-4B30GL 1/2" XCS-2B30GL XCS-5B30GL 3/4" XCS-1B30RL XCS-4B30RL 1/2" XCS-2B30RL XCS-5B30RL 3/4" XCS-1B30RL-GL XCS-4B30RL-GL 1/2" XCS-2B30RL-GL XCS-5B30RL-GL 3/4" LAMP VOLTS DIAGRAM LENS COLOR2 NAMEPLATE MARKING1 120V Clear Specify 120V Green Specify 120V Red Specify 120V Red/Green Specify X C S M O M E N TA R Y C O N TA C T P U S H B U T T O N A N D P I L O T L I G H T 4 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU XCS-0B13-C XCS-0B13-O XCS-0B13-U HUB SIZE XCS-1B13-C XCS-4B13-C 1/2" XCS-2B13-C XCS-5B13-C 3/4" XCS-1B13-O XCS-4B13-O 1/2" XCS-2B13-O XCS-5B13-O 3/4" XCS-1B13-U XCS-4B13-U 1/2" XCS-2B13-U XCS-5B13-U 3/4" DIAGRAM •• •• •• •• BUTTON COLOR LENS COLOR2 NAMEPLATE MARKING1 BUTTON LENS Red Red Stop Specify Green Red Start Specify Black Red Specify Specify X C S M O M E N TA R Y C O N TA C T T W O M I N I P U S H B U T T O N S A N D P I L O T L I G H T 4 CATALOG NUMBER COMPLETE UNITS (BOX & COVER) COVER WITH DEVICE DEAD-END FEED-THRU HUB SIZE XCS-1A15 XCS-4A15 1/2" XCS-2A15 XCS-5A15 3/4" XCS-0A15 DIAGRAM •• •• 120 VAC BUTTON COLOR LENS COLOR 2 Red NAMEPLATE MARKING 1 BUTTON Red Green LENS Stop Specify Start 1 For other than standard marking, refer to the special feature section of price list. 2 Lens color suffix listed in modifications page C18. Unless different lens colors are specified by proper suffix catalog number, red lens will be provided. 3 Pilot light transformers also listed in modifications. Add suffix to cover assembly catalog number. 4 Pilot light transformers will not fit in these assemblies. When transformer is desired, use SWB-14, indicating conduit openings required from chart on page C20 of this section. See page C18 for required transformer suffix. One transformer required for each lamp. For control stations with 1" conduit openings or for multi-gang assemblies, order cover and box as separate components. C23 XCS SERIES • CONTROLS C O V E R A S S E M B L I E S • C O N T R O L S TAT I O N S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7 (C,D) 9(E,F,G) Listed - File E53360 Certified - File LR11714 See files for details or call Killark. Key Operated Selector Switch F E AT U R E S - S P E C I F I C AT I O N S X C S T W O P O S I T I O N S E L E C T O R S W I T C H ( M A I N TA I N E D ) * CATALOG NUMBER COVER WITH DEVICE XCS-0S2A1 XCS-0S2A52 COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE XCS-1S2A1 XCS-4S2A1 1/2" XCS-2S2A1 XCS-5S2A1 3/4" XCS-42S2A5 XCS-45S2A5 3/4" TWO POSITION DIAGRAM LEFT POSITION RIGHT POSITION LEFT BLOCKS •• •• •• RIGHT BLOCKS LEFT BLOCKS •• •• •• •• •• •• NAMEPLATE MARKING 1 RIGHT BLOCKS •• OFF/ON •• •• OFF/ON X C S T H R E E P O S I T I O N S E L E C T O R S W I T C H ( M A I N TA I N E D ) * CATALOG NUMBER COVER WITH DEVICE XCS-0S3C4 XCS-0S3C52 COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE XCS-1S3C4 XCS-4S3C4 1/2" XCS-2S3C4 XCS-5S3C4 3/4" XCS-42S3C5 XCS-45S3C5 3/4" LEFT POSITION LEFT RIGHT BLOCKS BLOCKS •• •• •• 1 For other than standard marking, refer to the special feature section of the price list. THREE POSITION DIAGRAM CENTER POSITION RIGHT POSITION LEFT RIGHT LEFT RIGHT BLOCKS BLOCKS BLOCKS BLOCKS •• •• •• •• •• •• •• •• •• •• •• •• NAMEPLATE MARKING •• HOA •• •• HOA C 2These sub-assemblies require deep style box SWB-14 or SWB-18 through SWB-49. For control stations with 1" conduit openings or for multi-gang assemblies, order cover with devices and box as separate components. X C S T W O P O S I T I O N K E Y O P E R AT E D S E L E C T O R S W I T C H ( M A I N TA I N E D ) * CATALOG NUMBER COVER WITH DEVICE XCS-0K2A1D XCS-0K2A5D2 COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU HUB SIZE TWO POSITION DIAGRAM LEFT POSITION RIGHT POSITION LEFT RIGHT LEFT RIGHT BLOCKS BLOCKS BLOCKS BLOCKS XCS-1K2A1D XCS-4K2A1D 1/2" XCS-2K2A1D XCS-5K2A1D 3/4" •• XCS-42K2A5D XCS-45K2A5D 3/4" •• •• •• •• •• •• •• •• NAMEPLATE MARKING1 •• OFF/ON •• •• OFF/ON X C S T H R E E P O S I T I O N K E Y O P E R AT E D S E L E C T O R S W I T C H ( M A I N TA I N E D ) * XCS-0K3C5D2 XCS-1K3C4D XCS-4K3C4D 1/2" XCS-2K3C4D XCS-5K3C4D 3/4" •• •• XCS-42K3C5D XCS-45K3C5D 3/4" •• •• •• •• THREE POSITION DIAGRAM CENTER POSITION RIGHT POSITION LEFT RIGHT LEFT RIGHT BLOCKS BLOCKS BLOCKS BLOCKS •• •• •• •• XCS-0K3C4D COMPLETE UNITS (BOX & COVER) DEAD-END FEED-THRU LEFT POSITION LEFT RIGHT BLOCKS BLOCKS •• •• NAMEPLATE MARKING •• COVER WITH DEVICE HUB SIZE •• CATALOG NUMBER HOA •• •• •• •• HOA 1For other than standard marking, refer to the special feature section of the price list. 2These sub-assemblies require deep style box SWB-14 or SWB-18 through SWB-49. For control stations with 1" conduit openings or for multi-gang assemblies, order cover with devices and box as separate components. * Key removal in all positions for 2 & 3 position key operated selectors. Consult factory for variations. C24 XCS SERIES • CONTROLS C O V E R A S S E M B L I E S • C O N T R O L S TAT I O N S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7 (C,D) 9(E,F,G) Listed - File E53360 Certified - File LR11714 See files for details or call Killark. Selector Switch F E AT U R E S - S P E C I F I C AT I O N S XCS SPRING RETURN SELECTOR SWITCH Tw o P o s i t i o n S p r i n g R e t u r n t o L e f t CATALOG NUMBER COVER WITH DEVICE1 XCS-0S2L3F COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42S2L3F XCS-45S2L3F HUB SIZE TWO POSITION DIAGRAM RIGHT POSITION LEFT RIGHT RIGHT BLOCK BLOCK BLOCK LEFT POSITION LEFT BLOCK 3/4" •• •• •• •• XCS SPRING RETURN SELECTOR SWITCH Three Position Spring Return to Center From Right and Left CATALOG NUMBER COVER WITH DEVICE1 XCS-0S3M6G COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42S3M6G XCS-45S3M6G HUB SIZE 3/4" LEFT POSITION LEFT BLOCK RIGHT BLOCK •• •• THREE POSITION DIAGRAM CENTER POSITION RIGHT LEFT BLOCK BLOCK •• •• RIGHT POSITION RIGHT LEFT BLOCK BLOCK •• •• XCS SPRING RETURN SELECTOR SWITCH Three Position Spring Return to Center From Right, Maintain in Left CATALOG NUMBER COVER WITH DEVICE1 XCS-0S3L6G COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42S3L6G XCS-45S3L6G HUB SIZE 3/4" LEFT POSITION LEFT BLOCK RIGHT BLOCK •• •• THREE POSITION DIAGRAM CENTER POSITION LEFT BLOCK •• RIGHT BLOCK •• RIGHT POSITION LEFT BLOCK RIGHT BLOCK •• •• XCS SPRING RETURN SELECTOR SWITCH Three Position Spring Return to Center From Left, Maintain in Right CATALOG NUMBER COVER WITH DEVICE1 XCS-0S3R6G COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42S3R6G XCS-45S3R6G HUB SIZE 3/4" LEFT POSITION THREE POSITION DIAGRAM CENTER POSITION RIGHT POSITION LEFT BLOCK RIGHT BLOCK LEFT BLOCK RIGHT BLOCK LEFT BLOCK RIGHT BLOCK •• •• •• •• •• •• 1 All spring return assemblies must be installed on deep style box SWB-14 or SWB-18 through SWB-49. For control stations with 1" conduit openings or for multi-gang assemblies, order cover with devices and box as separate components. C25 XCS SERIES • CONTROLS C O V E R A S S E M B L I E S • C O N T R O L S TAT I O N S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7 (C,D) 9(E,F,G) Listed - File E53360 Certified - File LR11714 See files for details or call Killark. Key Operated F E AT U R E S - S P E C I F I C AT I O N S X C S K E Y O P E R AT E D S P R I N G R E T U R N S E L E C T O R S W I T C H 1 Tw o P o s i t i o n S p r i n g R e t u r n t o L e f t CATALOG NUMBER COVER WITH DEVICE2 XCS-0K2L3F22D COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42K2L3F22D XCS-45K2L3F22D HUB SIZE LEFT POSITION LEFT BLOCK 3/4" •• TWO POSITION DIAGRAM RIGHT POSITION RIGHT BLOCK LEFT BLOCK RIGHT BLOCK •• •• •• X C S K E Y O P E R AT E D S P R I N G R E T U R N S E L E C T O R S W I T C H 1 Three Position Spring Return to Center From Right and Left CATALOG NUMBER COVER WITH DEVICE2 XCS-0K3M6G32D COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42K3M6G32D XCS-45K3M6G32D HUB SIZE 3/4" LEFT POSITION LEFT BLOCK RIGHT BLOCK •• •• THREE POSITION DIAGRAM CENTER POSITION LEFT BLOCK •• RIGHT BLOCK •• RIGHT POSITION LEFT BLOCK RIGHT BLOCK •• •• C X C S K E Y O P E R AT E D S P R I N G R E T U R N S E L E C T O R S W I T C H 1 Three Position Spring Return to Center From Right, Maintain in Left CATALOG NUMBER COVER WITH DEVICE2 XCS-0K3L6G32D COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42K3L6G32D XCS-45K3L6G32D HUB SIZE 3/4" LEFT POSITION LEFT BLOCK RIGHT BLOCK •• •• THREE POSITION DIAGRAM CENTER POSITION RIGHT LEFT BLOCK BLOCK •• •• RIGHT POSITION RIGHT LEFT BLOCK BLOCK •• •• X C S K E Y O P E R AT E D S P R I N G R E T U R N S E L E C T O R S W I T C H 1 Three Position Spring Return to Center From Left, Maintain in Right CATALOG NUMBER COVER WITH DEVICE2 XCS-0K3R6G32D COMPLETE UNITS (BOX & COVER) FEED-THRU DEAD-END XCS-42K3R6G32D XCS-45K3R6G32D HUB SIZE 3/4" LEFT POSITION LEFT BLOCK RIGHT BLOCK •• •• THREE POSITION DIAGRAM CENTER POSITION RIGHT LEFT BLOCK BLOCK •• •• RIGHT POSITION RIGHT LEFT BLOCK BLOCK •• •• 1 All key operators are furnished keyed different. If keyed alike is required substitute letter “A” for “D” at end of catalog number. Keys are removable in left position selectors and in center position for 3 position selectors. For key removable in all positions change “22” in 2 position to “20” and “32” in 3 position to “30”. 2 All spring return assemblies must be installed on deep style box SWB-14 or SWB-18 through SWB-49. For control stations with 1" conduit openings or for multi-gang assemblies, order cover with devices and box as separate components. C26 SEAL X/XCS SERIES • CONTROLS B L A N K A C C E S S O R I E S / R E P L A C E M E N T PA R T S Standard Push Button (Mushroom) X-10 Blank Cover S TA N D A R D P U S H B U T T O N A S S E M B LY (1-3/8” DIAMETER) X BLANK AND SPECIAL COVERS CAT. NO. M I N I AT U R E P U S H B U T T O N A S S E M B LY (3/4” DIAMETER) DESCRIPTION C ATA L O G N U M B E R X-10 Blank cover X-60 Cover with (1) 3/4" NPSM Hole1 X-64 Miniature Push Button Cover with (2) 3/4" NPSM Holes1 2 1 For “G” series short operators. 2 When X-64 cover is used, one operator must be a pilot light due to electrical clearances. SHROUD RED GREEN BLACK RED GREEN BLACK XO1BR XO1BG XO1BK XO1AR XO1AG XO1AK Full XO3BR XO3BG XO3BK XO3AR XO3AG XO3AK Half XO5BR — — — — — Mushroom* *1-1/2” diameter Pilot Light X C S P I L O T L I G H T O P E R AT O R A S S E M B LY 1 CATALOG NUMBER SHROUD RED GREEN CLEAR AMBER XO21BR XO21BG XO21BC XO21BA Miniature Lockout Standard Lockout Selector Lockout Standard Hole Plug Dust/Weather Cap C ATA L O G N U M B E R G O M L O C K ACCESSORIES CATALOG NUMBER PUSH BUTTON1 LOCKOUT GOM Lockout DESCRIPTION SELECTOR LOCKOUT1 HOLE PLUG1 DUST/WEATHER CAP RED GREEN BLACK XLOB G0-567-LOK XOBP XDBR XDBG XDBB Standard operator XLOA — XOAP — — — Miniature operator XCS-OMMR3 1 Replacement only by qualified person. Operator is staked into position at factory. Removal may damage operator or cover threads. X C S R E P L A C E M E N T B L A N K N A M E P L AT E S CATALOG NUMBER LOCKOUT FOR MAINTAINED PUSH BUTTON COVERS DESCRIPTION XCSNPPB XCS/FXCS full size (standard) push button XCSNPPBM XCS/FXCS miniature push button XCSNPPL XCS/FXCS pilot light XCSNPSS2 XCS/FXCS 2 position selector switch XCSNPSS3 XCS/FXCS 3 position selector switch FXCS-OMMR3 C27 SEAL X/XCS SERIES • CONTROLS A C C E S S O R I E S / R E P L A C E M E N T PA R T S Incandescent Filament Lamp Contact Block INCANDESCENT LAMP CANDELABRA SCREW BASE S TA N D A R D C O N TA C T B L O C K S CAT. NO. VOLT COLOR 0460051B 120V AC/DC CLEAR 0460414B 24V AC/DC CLEAR CAT. NO. DESCRIPTION GO-8672-BJK 1 N.O. GO-8672-BJJ 1 N.O. GO-8672-BJH 1 N.O. Early Make GO-8672-BJE 1 N.C. Late Make C O N TA C T B L O C K S F O R X C S S E R I E S C ATA L O G N U M B E R S E N D I N G W I T H B4-U, B7, A8 OR A9 LED Lamp XCS-FXCS LED LAMPS CAT. NO. VOLT COLOR XCSLED-R110 120 VAC RED XCSLED-G110 120 VAC GREEN XCSLED-A110 120 VAC AMBER CAT. NO. DESCRIPTION YOWE-OT2B 1 N.O. YOWE-OT2D 1 N.C. C O N TA C T B L O C K F O R F X C S S E R I E S C ATA L O G N U M B E R S E N D I N G W I T H B-13U CAT. NO. DESCRIPTION GO-8672-PTCH (1) N.O. (1) N.C. C C O N TA C T B L O C K F O R F X C S S E R I E S C ATA L O G N U M B E R S E N D I N G W I T H B4-U, B7, A5, C5 Incandescent Filament Lamp LED Lamp XCS-FXCS LAMPS CAT. NO. LAMP TYPE VOLTS AC/DC YOSY24MB FILAMENT 24 COLOR CLEAR YOSY120MB FILAMENT 120 CLEAR GOLED-A110 LED 110 AMBER GOLED-G110 LED 110 GREEN GOLED-R110 LED 110 RED GOLED-A24 LED 24 AMBER GOLED-G24 LED 24 GREEN GOLED-R24 LED 24 RED CAT. NO. DESCRIPTION GO-8672-PTCC (2) N.O. (2) N.C. C28 XS SERIES • CONTROLS TUMBLER SWITCH Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Listed - FILE E53360 Certified - File LR11712 FM APPROVED XS-3C File OP7A5.AE See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Applications Used where making, breaking, or changing connections in an electric circuit are required. Features XS Series are front lever rotary operated switch assemblies with standard provisions for padlocking in either “ON” or “OFF” position. The lever is connected to a threaded stainless steel shaft which passes through the cover. XS TUMBLER SWITCH COVER WITH WITHOUT DEVICE DEVICE XS-1C XNS-1C XS-2C XNS-2C XS-8C XNS-8C XS-3C XNS-3C XS-5C XNS-5C XS-6C XNS-6C XS-7C XNS-7C XS-1D XNS-1D XS-2D XNS-2D XS-4C — CATALOG NUMBER COMPLETE UNITS HUB (BOX, COVER AND SWITCH) SIZE DEAD-END FEED-THRU 1/2" XS-11C XS-41C 3/4" XS-21C XS-51C 1/2" XS-12C XS-42C 3/4" XS-22C XS-52C 1/2" XS-18C XS-48C 3/4" XS-28C XS-58C 1/2" XS-13C XS-43C 3/4" XS-23C XS-53C 1/2" XS-15C XS-45C 3/4" XS-25C XS-55C 1/2" XS-16C XS-46C 3/4" XS-26C XS-56C 1/2" XS-17C XS-47C 3/4" XS-27C XS-57C 1/2" XS-11D XS-41D 3/4" XS-21D XS-51D 1/2" XS-12D XS-42D 3/4" XS-22D XS-52D — — — SWITCH STYLE SWITCH RATING 120/277 VAC, 1Ø 1-POLE 20A2 2-POLE 20A2 3-POLE 1 3-WAY/ SPDT No center off SPDT Center off DPDT No center off DPDT Center off 20A2 1-POLE 30A2 2-POLE 30A2 4-WAY 20A2 1 Rated 15 amperes, 240/480 VAC., 3Ø: 3HP-240 VAC., 5 HP-480 VAC. 2 Horsepower rated 1 HP at 120VAC, 2 HP at 240VAC. 20A2 20A2 20A2 C29 XAL/XAS SERIES • CONTROLS F I R E A L A R M S TAT I O N S Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) XAS Break Glass XAL Pull Ring F E AT U R E S - S P E C I F I C AT I O N S Applications • Hazardous areas due to the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers or flyings • Installation at petroleum refineries, chemical and petrochemical plants, storage areas, and other processing facilities where hazardous substances are handled or stored • Areas where emergency control of fire alarm or signal circuits is required Features • Enclosure is made of copper free aluminum alloy • Conduit openings are 3/4" NPT feed through • Red, textured powder epoxy paint finish is standard on box and cover and provides high visibility for alarm station • XAL-458 has (2) normally open and (2) normally closed contacts. • Bilingual nameplates included per CSA requirement • Internal ground screw is standard Operation XAL: The alarm station is activated by lifting the front cover and pulling down ring. This quick, easy to use two-step process prevents unintentional operation. Operator is reset by depressing shaft and returning plate to original position. XAS: Breaking glass with hammer provided activates alarm. Reset by replacing glass. Replacement glass catalog number YOKK-15214. Replacement hammer and chain KIT-232. XAL Series: XAS Series: Listed - File E50498 Listed - File E50498 Certified - File LR31085 See files for details or call Killark. Listed - CE69 Certified - File LR31085 Listed - California State Fire Marshall #7150-1439:100 X A L F I R E A L A R M S TAT I O N CATALOG NUMBER OPERATION TYPE CONTACT BLOCKS XAL-53 Pull ring (1) NO/NC XAL-458 Pull ring (2) NO/NC XAS-53 Break glass (1) NO/NC C C O N TA C T B L O C K R AT I N G AC VOLTS MAKE AMPERES VA DC BREAK AMPERES VA CONTINUOUS CARRYING AMPERES VOLTS MAKE BREAK CONTINUOUS CARRYING AMPERES 120 60 7200 6 720 10 125 1.1 2.5 240 30 7200 3 720 10 250 0.55 2.5 480 15 7200 1.5 720 10 600 0.2 2.5 600 12 7200 1.2 720 10 — — — Dimensions XAL-53 Note: On XAL-458 the overall depth is 5-9/16” XAS-53 C30 G SERIES • CONTROLS C U S T O M C O N T R O L PA N E L O P E R AT O R S I N T R O D U C T I O N Class I, Div. 1 & 2, Groups B,C,D Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) See Area Classification Chart below F E AT U R E S - S P E C I F I C AT I O N S Applications G Series custom control panel operators are designed for use in hazardous locations when installed in suitable enclosures such as B7E EXB, XJB, DB, SWB and GCS Series boxes and B7, Y7 Starter Enclosures. Features • Operators are all aluminum except for certain movable parts which are stainless steel, all other parts such as screws are either stainless steel or plated steel • Threaded bodies are all 3/4"-14 NPSM thread • Control stations can be grouped into a single assembly thus reducing installation time and cost • Junction boxes may be used to mount operators along with glass lens for viewing internally mounted meters. Additional relays, timers, terminal blocks, or other equipment may also be internally mounted to provide a single centralized control unit. • Custom operators other than standard assemblies listed may be ordered by proper catalog number from custom operator ordering system pages C40 & C41 Electrical Rating Push button stations, selector switches Heavy duty 600 VAC max. Pilot lights 120 VAC. Dimensions See Dimensional information for G Series operators on page C42. Recommended Operator Selection Short Style DB/SWB/GCS Enclosures. Assemblies with wall thickness up to 1/2" thick. Long Style All B7E/XJB Enclosures. EXB (see page E12) enclosures with cover thickness up to 1-1/2” thick. potentiometer operators are CENELEC/ATEX EExd IIB+H2 when installed in series EXB*CEN and GR*CEN enclosures. For pilot lights and illuminated push buttons in CENELEC/ATEX applications see page C33. Extended Style EXB larger size enclosures (see page E12) with cover thickness up to 2-1/2” thick. Killark long and extended push buttons, selector switches, reset and C O N TA C T B L O C K R AT I N G S CURRENT Inrush 120 VAC 240 VAC 60 30 Breaking 6 3 Carr ying 10 10 480 VAC 600 VAC 15 125 VDC 12 1.5 1.2 10 10 250 VDC .55 .275 .55 .275 2.50 2.50 Note: Contact blocks can be stacked four deep maximum. A R E A C L A S S I F I C AT I O N C H A R T F O R O P E R AT O R S GO14 GO172 GO302 GO572 GOL24 GOL383 GO54 GO192 GO352 GO363 GO592 GOL44 GOL1133 GO24 GO64 GO74 GO83 GO104 GO144 GO154 GO162 1 Class 2 Class 3 Class 4 Class 5 Class GO182 GO212 GO222 GO232 GO252 GO262 GO272 GO282 GO342 GO373 GO383 GO393 GO401 GO502 G0512 GO562 GO582 GO1133 GO1143 GO1332 GO1342 GOB34 GOB44 GOL14 GOL34 GOL54 GOL64 GOL74 GOL83 GOL144 GOL154 GOL363 GOL374 GOL393 GOL1143 GOLRST4 GOM15 GOR114 GORST4 GO113882 GO113722 II Div. 1 & 2 Group EFG NEMA 9EFG I Div. 1 & 2 Group CD, Class II Div. 1 & 2 Group EFG, Class III NEMA 7CD, 9EFG I Div. 1 & 2 Group BCD, Class II Div. 1 & 2 Group EFG, Class III NEMA 3, 4, 7BCD, 9EFG I Div. 1 & 2 Group BCD, Class II Div. 1 & 2 Group EFG, Class III NEMA 3, 4, 4X, 7BCD, 9EFG I Div. 1 & 2 Group CD, Class II Div. 1 & 2 Group EFG, Class III NEMA 3, 4, 7CD, 9EFG C31 G SERIES • CONTROLS PUSH BUTTONS Single Push Button Long Class I, Div. 1 & 2, Groups B,C,D4 Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) Single Push Button Extended See Area Classification Chart page C40 for Details Listed - File E12379 “G” Series Operator Maintained Certified - File LR11714 See files for details or call Killark. Double Push Button F E AT U R E S - S P E C I F I C AT I O N S G S I N G L E P U S H B U T T O N ( M O M E N TA R Y C O N TA C T ) SHORT4 CATALOG NUMBER1 LONG EXTENDED COLOR GO21-GZ1B GO1-GX1B N34 GOL1G1 Green GO21-KZ1C GO1-KX1C N34 GOL1K1 Black GO21-RZ2B GO1-RX2B N34 GOL1R2 Red GO21-KZ2C GO1-KX2C N34 GOL1K2 Black GO21-GZ3C GO1-GX3C N34 GOL1G3 Green GO21-RZ3C GO1-RX3C N34 GOL1R3 Red GO21-KZ3C GO1-KX3C N34 GOL1K3 Black GO21-GZ0C GO1-GX0C N34 GOL1G Green GO21-RZ0C GO1-RX0C N34 GOL1R Red GO21-KZ0C GO1-KX0C N34 GOL1K Black CONTACT TYPE3 NAMEPLATE MARKING2 Start or Stop •• Reset or Blank Start or Stop •• Reset or Blank Reset or Blank •• •• Reset or Blank Reset or Blank Reset or Blank None Reset or Blank Reset or Blank G S I N G L E P U S H B U T T O N ( M A I N TA I N E D C O N TA C T ) M U S H R O O M H E A D P U S H - P U L L O P E R AT I O N GOM21-GM3C GOM1-GM3C N34 GOML1G3 Green GOM21-RM3C GOM1-RM3C N34 GOML1R3 Red GOM21-KM3C GOM1-KM3C N34 GOML1K3 Black GOM21-GM0C GOM1-GM0C N34 GOML1G Green GOM21-RM0C GOM1-RM0C N34 GOML1R Red GOM21-KM0C GOM1-KM0C N34 GOML1K Black Blank •• •• Blank Blank Blank None Blank Blank G D O U B L E P U S H B U T T O N ( M O M E N TA R Y C O N TA C T ) GO22-GR12D G02-GR12D N34 GOL2GR12 Green/Red GO22-KK12D G02-KK12D N34 GOL2KK12 Black/Black GO22-GR33D G02-GR33D N34 GOL2GR33 Green/Red GO22-KK33D G02-KK33D N34 GOL2KK33 Black/Black GO22-GR00D G02-GR00D N34 GOL2GR Green/Red GO22-KK00D G02-KK00D N34 GOL2KK Black/Black •• •• •• •• •• •• Start/Stop or Blank Start/Stop or Blank Start/Stop or Blank Start/Stop or Blank Start/Stop or Blank None Start/Stop or Blank G D O U B L E P U S H B U T T O N ( M A I N TA I N E D C O N TA C T ) 5 — GOR11-GR6D N34 — Green/Red — GOR11-GR7D N34 — — GOR11-GR8D N34 GOR11-GR0D N34 — Start/Stop or Blank •• •• Green/Red •• •• Start/Stop or Blank — Green/Red •• •• •• •• Start/Stop or Blank — Green/Red None Start/Stop or Blank 1 Refer to catalog page C30 to select proper operator for enclosure, pages C38 & C39 for accessories, page C30 for complete details on Area Classification of operators, page C42 for Dimensional information. 2 Nameplates are double sided. 3 Contact Blocks are shown in their normal position. 4 Short style operators are suitable for Class l Group C & D, Class ll Group E,F,G only. 5 When pressed, the green button will remain in a depressed position. Pressing red button releases green from the depressed position. C C32 GS SERIES • CONTROLS PILOT LIGHTS Class I, Div. 1 & 2, Groups B,C,D4 Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) See Area Classification Chart page C40 for Details Listed - File E12379 Certified - File LR11714 Pilot Light Illuminated Button See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S G PILOT LIGHTS SHORT 4 GO23-A23C CATALOG NUMBER 1 LONG GOB3-A23C N34 EXTENDED GOL3A COLOR CONTACT TYPE 3 NAMEPLATE MARKING 2 Blank Amber Blank GO23-B23C GOB3-B23C N34 GOL3B Blue GO23-C23C GOB3-C23C N34 GOL3C Clear GO23-F23C GOB3-F23C N34 GOL3F Frosted GO23-G23C GOB3-G23C N34 GOL3G Green Blank GO23-R23C GOB3-R23C N34 GOL3R Red Blank 110-120 Volts Full Volts Blank Blank G P I L O T L I G H T S W I T H L E D 1 1 0 V O LT L A M P S — GOB3-A23C N34 LED GOL3A LED Amber — GOB3-G23C N34 LED GOL3G LED Green — GOB3-R23C N34 LED GOL3R LED Red 110-120 Volts Full Volts (LED) Blank Blank Blank G I L L U M I N AT E D B U T T O N O R P U S H T O T E S T P I L O T L I G H T — GOB4-A233C N34 GOL4A3 Amber — GOB4-B233C N34 GOL4B3 Blue — GOB4-C233C N34 GOL4C3 Clear — GOB4-F233C N34 GOL4F3 Frosted — GOB4-G233C N34 GOL4G3 Green — GOB4-R233C N34 GOL4R3 Red — GOB4-A230C N34 GOL4A Amber — GOB4-B230C N34 GOL4B Blue — GOB4-C230C N34 GOL4C Clear — GOB4-F230C N34 GOL4F Frosted — GOB4-G230C N34 GOL4G Green — GOB4-R230C N34 GOL4R Red 110-120 Volts Full Volts Blank Blank Blank Blank •• •• Blank Blank Blank 110-120 Volts Blank Blank No Contact Blocks Blank Blank Blank G I L L U M I N AT E D B U T T O N O R P U S H T O T E S T P I L O T L I G H T W I T H L E D 1 1 0 V O LT L A M P S — GOB4-A233C N34 LED GOL4A3 LED Amber — GOB4-G233C N34 LED GOL4G3 LED Green — GOB4-R233C N34 LED GOL4R3 LED Red — GOB4-A230C N34 LED GOL4A LED Amber — GOB4-G230C N34 LED GOL4G LED Green — GOB4-R230C N34 LED GOL4R LED Red Blank 110-120 Volts Full Volts (LED) •• •• 110-120 Volts (LED) No Contact Blocks Blank Blank Blank Blank Blank 1Refer to catalog page C30 to select proper operator for enclosure, pages C38 & C39 for accessories, page C30 for com plete details on Area Classification of operators, page C42 for Dimensional information. 2Nameplates are double sided. 3Contact Blocks are shown in their normal position. 4Short style operators are suitable for Class l Group C & D, Class ll Group E,F,G only. C33 G SERIES • CONTROLS P I L O T L I G H T S F O R AT E X / C E N E L E C A P P L I C AT I O N S Class I, Div. 1 & 2, Groups B,C,D Class I, Zones 1 & 2, Groups llB+H2, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) ATEX-EExd IIB + H2 Listed - File E12379 Certified - File LR11714 Pilot Light ATEX Illuminated Push Button ATEX P T B N o . 0 3 AT E X 1 2 0 3 U F E AT U R E S - S P E C I F I C AT I O N S G PILOT LIGHTS CATALOG NUMBER1 LONG GOB3-A23C N34CN EXTENDED GOL3ACN COLOR CONTACT TYPE 3 NAME PLATE MARKING2 Amber Blank GOB3-B23C N34CN GOL3BCN Blue GOB3-C23C N34CN GOL3CCN Clear GOB3-F23C N34CN GOL3FCN Frosted GOB3-G23C N34CN GOL3GCN Green Blank GOB3-R23C N34CN GOL3RCN Red Blank Blank 1 1 0 - 1 2 0 Vo l t s F u l l Vo l t s Blank Blank G P I L O T L I G H T S W I T H L E D 1 1 0 V O LT L A M P S GOB3-A23C N34LEDCN GOL3ALEDCN Amber GOB3-G23C N34LEDCN GOL3GLEDCN Green GOB3-R23C N34LEDCN GOL3RLEDCN Red 1 1 0 - 1 2 0 Vo l t s F u l l Vo l t s ( L E D ) Blank Blank Blank G I L L U M I N AT E D P U S H B U T T O N O R P U S H T O T E S T P I L O T L I G H T GOB4-A233CN34CN GOL4A3CN GOB4-B233CN34CN GOL4B3CN Blue GOB4-C233CN34CN GOL4C3CN Clear GOB4-F233CN34CN GOL4F3CN Frosted GOB4-G233CN34CN GOL4G3CN Green GOB4-R233CN34CN GOL4R3CN Red Blank GOB4-A230CN34CN GOL4A0CN Amber Blank GOB4-B230CN34CN GOL4B0CN Blue GOB4-C230CN34CN GOL4C0CN Clear GOB4-F230CN34CN GOL4F0CN Frosted GOB4-G230CN34CN GOL4G0CN Green GOB4-R230CN34CN GOL4R0CN Red Amber 1 1 0 - 1 2 0 Vo l t s F u l l Vo l t s Blank Blank Blank Blank •• •• Blank 1 1 0 - 1 2 0 Vo l t s Blank Blank No Contact Blocks Blank Blank Blank G I L L U M I N AT E D P U S H B U T T O N O R P U S H T O T E S T P I L O T L I G H T W I T H L E D 1 1 0 V O LT L A M P S GOB4-A233CN34LEDCN GOL4A3LEDCN Amber GOB4-G233CN34LEDCN GOL4G3LEDCN Green GOB4-R233CN34LEDCN GOL4R3LEDCN Red GOB4-A230CN34LEDCN GOL4A0LEDCN Amber GOB4-G230CN34LEDCN GOL4G0LEDCN Green GOB4-R230CN34LEDCN GOL4R0LEDCN Red Blank 1 1 0 - 1 2 0 Vo l t s F u l l Vo l t s ( L E D ) •• •• 1 1 0 - 1 2 0 Vo l t s ( L E D ) No Contact Blocks Blank Blank Blank Blank Blank 1 Refer to catalog page C30 to select proper operator for enclosure, pages C38 & C39 for accessories, page C30 for complete details on Area Classification of operators, page C42 for Dimensional information. 2 Nameplates are double sided. 3 Contact Blocks are shown in their normal position. NOTE: British standards BSEN50014 and EN50018 have special marking and relamping demands that require modifications to the standard Killark Pilot Lights. Pilots lights and illuminated push buttons on this page must be used for enclosures that are modified to meet ATEX/CENELEC. C C34 G SERIES • CONTROLS SELECTOR SWITCHES Class I, Div. 1 & 2, Groups B,C,D4 Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) See Area Classification Chart page C40 for Details Listed - File E12379 Selector Switch Maintained Contact Selector Switch Spring Return Certified - File LR11714 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S G S E L E C T O R S W I T C H M A I N TA I N E D C O N TA C T EXTENDED CONTACT ARRANGEMENT 3 Left G025-3C3G G05-3C3G N34 G0L53C3 •• •• Left G05-4H8H N34 G0L54H8 Two position Right •• •• 1 2 3 4 •• •• •• •• •• •• •• TYPE OF OPERATION 2 Right •• G025-4H8H Center •• •• •• G0L52A3 •• •• G05-2A3F N34 •• •• G025-2A3F •• •• •• CATALOG NUMBER 1 LONG •• •• SHORT 4 Three position Four position •• •• G S E L E C T O R S W I T C H M A I N TA I N E D C O N TA C T W I T H O U T C O N TA C T S G025-2A0F G05-2A0F N34 G0L52A None Two position G025-3C0G G05-3C0G N34 G0L53C None Three position G025-4H0H G05-4H0H N34 G0L54H None Four position G SELECTOR SWITCH SPRING RETURN Left Right •• G0L63 •• G07-6G N34 G0L76 Left Center •• •• •• G034-6G G014-6G N34 G0L146 •• •• Left Center Right •• •• •• G015-6G N34 G0L156 •• Three position spring return to center from right or left Three position spring return to center from right, maintain in left •• Left Center •• •• •• G035-6G Right •• G027-6G Two position spring return to left •• •• G06-3F N34 •• G026-3F •• •• Right Three position spring return to center from left, maintain in right •• G S E L E C T O R S W I T C H S P R I N G R E T U R N W I T H O U T C O N TA C T S G026-0F G06-0F N34 G0L6 None Two position spring return to left G027-0G G07-0G N34 G0L7 None Three position spring return to center from right or left G034-0G G014-0G N34 G0L14 None Three position spring return to center from right, maintain in left G035-0G G015-0G N34 G0L15 None Three position spring return to center from left, maintain in right 1Refer to catalog page C30 to select proper operator for enclosure, C38 & C39 for Accessories, C30 for complete details on Area Classification of operators, C42 for Dimensional Information, C40 for Special Contact Configurations. 2Nameplates are Double sided. 2 position marked ON-OFF and Blank on other side. 3 position marked HAND-OFF-AUTO and Blank on other side. 4 position is Blank. 3Contact Blocks are shown in their normal position. 4Short style operators are suitable for Class I Group C & D, Class II Group E,F,G only. C35 G SERIES • CONTROLS KEYED SELECTOR SWITCHES Class I, Div. 1 & 2, Groups B,C,D6 Class 1, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) See Area Classification Chart page C40 for Details Listed - File E12379 Certified - File LR11714 Key Operated Selector Switch See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S G K E Y S E L E C T O R S W I T C H M A I N TA I N E D C O N TA C T 4 CATALOG NUMBER1 SHORT6 LONG EXTENDED G028-2A3F22D G08-2A3F22D N34 G0L82A322D G028-3C3G32D G08-3C3G32D N34 G0L83C332D CONTACT ARRANGEMENT3 Left Left Right •• •• •• •• Center •• •• TYPE OF OPERATION25 Two position Right •• •• •• •• Three position G K E Y S E L E C T O R S W I T C H M A I N TA I N E D C O N TA C T W I T H O U T C O N TA C T S 4 G028-2A0F22D G08-2A0F22D N34 G0L82A022D None Two position G028-3C0G32D G08-3C0G32D N34 G0L83C032D None Three position G KEY SELECTOR SWITCH SPRING RETURN4 G037-3C6G32D N34 G0L36L322D G0L37C632D G0L38L632D •• •• •• •• G0L39R632D Two position spring return to left Right Three position spring return to center from right or left Left Center •• •• Right •• •• Left Center •• •• •• G039-3R6G32D N34 •• Center •• G059-3R6G32D •• •• •• G038-3L6G32D N34 Right Left •• G058-3L6G32D Left •• G057-3C6G32D G036-2L3F22D N34 •• G056-2L3F22D •• •• Three position spring return to center from right, maintain in left Right Three position spring return to center from left, maintain in right •• G K E Y S E L E C T O R S W I T C H S P R I N G R E T U R N W I T H O U T C O N TA C T S 4 G056-2L0F22D G036-2L0F22D N34 G0L36L022D None Two position spring return to left G057-3C0G32D G037-3C0G32D N34 G0L37C032D None Three position spring return to center from right or left G058-3L0G32D G038-3LOG32D N34 G0L38L032D None Three position spring return to center from right, maintain in left GO59-3R0G32D G039-3R0G32D N34 G0L39R032D None Three position spring return to center from left, maintain in right 1Refer to catalog page C30 to select proper operator for enclosure, pages C38 & C39 for Accessories, page C30 for complete details on Area Classification of operators, page C42 for Dimensional Information, page C40 for Special Contact Configurations. 2Nameplates are Double sided. 2 position marked ON-OFF and Blank on other side. 3 position marked HAND-OFF-AUTO and Blank on other side. 4 position is Blank. 3Contact Blocks are shown in their normal position. 4All Key Operators are furnished Keyed Different If Keyed Alike is required substitute letter “A” for letter “D” in catalog number. 5Keys are removable in Left position on 2 position selectors and in Center position on 3 position selectors. For key removal in ALL positions change “22” in 2 position to “20” and “32” in 3 position to “30”. 6Short style operators are suitable for Class I Group C & D, Class II Group E,F,G only. C C36 G SERIES • CONTROLS S P E C I A LT Y O P E R AT O R S Potentiometer and Rheostat (electrical device not included) Snap Switch Class I, Div. 1 & 2, Groups B,C,D4 Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) Reset See Area Classification Chart page C40 for Details Certified - File LR11714 Capillary Seal Rotary or Motor Shaft See file for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S G S N A P S W I T C H O P E R AT O R CATALOG NUMBER 1 SHORT 4 LONG G R O TA R Y O R M O T O R S H A F T O P E R AT O R RATINGS NAMEPLATE 125 VAC 250 VAC MARKING 2 TYPE SWITCH GO30-31F GO10-31F N34 • • SPST GO30-33F • • • SPDT (3-way) GO10-33F N34 10 Amp 10 Amp 5 Amp Off/On or Blank 10 Amp Off/On or Blank (UL File E10501) CATALOG NUMBER 1 GO-165 GO-185 SHAFT DIAMETER 1/4” 3/8” GO-175 GO-195 Male-Female 1/4” 3/8” GO-50 1/2” GO-51 1/2” DESCRIPTION 1 TYPE Male-Male Rotar y or motor shaft operator used to transfer rotar y motion through wall of explosion proof enclosure. GO50 requires 1-1/4" NPSM opening (UL File E150827) G P O T E N T I O M E T E R S A N D R H E O S TAT S O P E R AT O R CATALOG NUMBER 1 SHORT 4 EXTENDED LONG TYPE GO133 GO113 N34 GOL113 Single turn GO134 GO114 N34 GOL114 Fifteen turn DESCRIPTION 1 Control operator for use with potentiometers or rheostats having a 1/4" diameter by 7/8" long shaft. (UL File E150827) G R E S E T O P E R AT O R CATALOG NUMBER 1 NAMEPLATE 2 SHORT 3 LONG EXTENDED GO40-KX2C GO-RST (UL File E150827) GOLRST Reset or Blank TYPE OPERATION 1 Black plunger type reset operator, supplied with a 6” long fiber extension which can be removed or cut to desired length. G CAPILLARY SEALS CATALOG NUMBER 1 CAPILLARY SIZE GO-11388-0785 0.078± GO-11372-0935 0.093± .002 Dia. .002 Dia. TYPE Accepts Capillar y With Max. Bulb Dia. of 9/16". DESCRIPTION 1 Use where a mechanical means for passing a thermostat or similar capillary tube through the wall of a hazardous location enclosure. 1 Refer to catalog page C30 to select proper operator for enclosure, pages C38 & C39 for Accessories, page C30 for complete details on Area Classification of operators, page C42 for Dimensional Information. 2 Nameplates are double sided. 3 GO40 series reset button is suitable for Class II E, F, and G locations only. 4 Short style operators are suitable for Class I Group C & D, Class II Group E,F,G only. 5 These devices are not UL or CSA approved. C37 GCS/SWBC SERIES • CONTROLS O P E R AT O R B O D I E S Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) SWBC Series: Listed - File E10514 Certified - File LR11716 Style 1 - GCS-16 Style 3 - SWBC-16 Style 2 - GCS-163 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S GCS STYLE 1 – CATALOG NUMBER W I T H D R I L L E D A N D TA P P E D O P E R AT O R H O L E S I N C O V E R 1 NO. OF OPERATOR HOLES CONSISTS OF BOX COVER Dimensions DIMENSIONS A B C H I 5/16" (8) 5-3/16" 3-5/8" (148) (92) D E — G 3-1/2" (89) 2-9/16" (65) 4-5/16" 3-3/8" (110) (86) GCS-13 1 SWB-13 X-60 6-1/8" 2-3/8" (156) (60) GCS-14 1 SWB-14 X-60 6-1/8" 2-3/8" (156) (60) 5/16" (8) 5-1/4" (133) 3-5/8" (92) — GCS-15 2 SWB-15 X-61 7-3/8" 3-1/8" (187) (79) 5/16" (8) 6-1/2" (165) 4" (102) 1" (25) 4-1/4" (108) 3-1/4" (82) GCS-16 3 SWB-16 X-62 5/16" (8) 8-1/2" (216) 4" (108) 2" (51) 4-1/4" (105) 3-1/4" (82) GCS-83 4 SWB-83 2 9-3/8" 3-3/16" (238) (81) X-84 3-1/4" (82) 3/8" (10) 11-7/8" (302) 4-3/8" 1-1/4" 4-3/16" 3-1/4" (111) (32) (106) (82) GCS-85 5 SWB-83 2 13" (330) X-85 13" (330) 3-1/4" (82) 3/8" (10) 11-7/8" (302) 4-3/8" 2" (111) (51) GCS STYLE 2 – 4-3/16" 3-3/16" (106) (81) W I T H D R I L L E D A N D TA P P E D O P E R AT O R H O L E S I N B A C K O F B O X 1 GCS-131 1 SWB-13 X-10 6-1/8" 2-3/8" (156) (60) 5/16" (8) 5-3/16" 3-5/8" (148) (92) — 3-1/2" (89) GCS-141 1 SWB-14 X-10 6-1/8" 2-3/8" (156) (60) 5/16" (8) 5-1/4" (133) 3-5/8" (92) — 4-5/16" 3-3/8" (110) (86) X-11 7-3/8" 3-1/8" (187) (79) 5/16" (8) 6-1/2" (165) 4" (102) 1" (25) 4-1/4" (108) 3-1/4" (82) 9-3/8" 3-3/16" (238) (81) 5/16" (8) 8-1/2" (216) 4" (102) 2" (51) 4-1/4" (108) 3-1/4" (82) GCS-152 2 SWB-15 2-9/16" (65) GCS-163 3 SWB-16 X-12 GCS-834 4 SWB-83 2 X-83 3-1/4" (82) 3/8" (10) 11-7/8" (302) 4-3/8" 1-1/4" 4-3/16" 3-1/4" (111) (32) (106) (82) GCS-835 5 SWB-83 2 13" (330) X-83 13" (330) 3-1/4" (82) 3/8" (10) 11-7/8" (302) 4-3/8" 2" (111) (51) SWB STYLE 3 – 4-3/16" 3-3/16" (106) (81) B L A N K B O X A N D C O V E R - N O O P E R AT O R H O L E S 1 SWBC-13 None SWB-13 X-10 6-1/8" 2-3/8" (156) (60) 5/16" (8) 5-3/16" 3-5/8" (148) (92) — 3-1/2" (89) SWBC-14 None SWB-14 X-10 6-1/8" 2-3/8" (156) (60) 5/16" (8) 5-1/4" (133) 3-5/8" (92) — 4-5/16" 3-3/8" (110) (86) SWBC-15 None SWB-15 X-11 7-3/8" 3-1/8" (187) (79) 5/16" (8) 6-1/2" (165) 4" (102) — 4-1/4" (108) 3-1/4" (82) SWBC-16 None SWB-16 X-12 5/16" (8) 8-1/2" (216) 4" (111) — 4-1/4" (108) 3-1/4" (82) SWBC-83 None SWB-83 2 9-3/8" 3-3/16" (238) (81) X-83 3/8" (10) 11-7/8" (302) 4-3/8" (111) — 4-3/16" 3-3/16" (106) (81) 13" (330) 3-1/4" (82) 2-9/16" (65) 1 All GCS and SWBC Series are cataloged without conduit openings. Specify conduit size and location when ordering. 2 GCS-83, GCS-834, and GCS-85, GCS-835 are provided with four mounting lugs. Notes: Use short style operators for cover devices and long style operators for back of box mounted devices when panel mounting. Style 2 control stations with holes in back of box are typically used for panel mounting. C C38 Rubber Boot G SERIES • CONTROLS A C C E S S O R I E S / R E P L A C E M E N T PA R T S Trim Locknut Spacer Hole Plug Transformer GO-8670 Push Button Lockout GO-8665 Push Button Lockout GO-10502 ACCESSORIES CATALOG NUMBER USED ON OPERATOR TYPE DESCRIPTION GO-8176-1 GO1, GO21, GOL1 Protective rubber boot (Black) GO-8176-2 GO1, GO21, GOL1 Protective rubber boot (Red) GO-8176-3 GO1, GO21, GOL1 Protective rubber boot (Green) GO-8177 3/4” NPSM Hole plug GO-8222 1/4” Thick, Used as external spacer. Trim locknut spacer GO-8670-32 GO23, GOB3, GOL3 Transformer 220V-110V GO-8670-34 GO23, GOB3, GOL3 Transformer 440V-110V GO-8671-42 GOB4, GOL4 Transformer 220V-110V GO-8671-44 GOB4, GOL4 Transformer 440V-110V GO-8665 GO2, GO22, GOL2, GOR11 Push button lockout GO-10502 GO1, GO21, GOL1 Push button lockout GO567-LOK GO & GOL5-6-7-14-15-26-27-34-35 Selector switch lockout GO-RL For use with GO’s Sealing lockout GO-9824 GO40, GO-RST, GOLRST Reset plate B7PLR220 GO23, GOB3, GOL3, GOB4, GOL4 Resistor kit 220V-110V B7PLR440 GO23, GOB3, GOL3, GOB4. GOL4 Resistor kit 440V-110V B7PLR550 GO23, GOB3, GOL3, GOB4, GOL4 Resistor kit 550V-110V GOLED-R110 GOB3, GOL3, GOB4, GOL4 LED lamps 120V (Red) GOLED-G110 GOB3, GOL3, GOB4, GOL4 LED lamps 120V (Green) GOLED-A110 GOB3, GOL3, GOB4, GOL4 LED lamps 120V (Amber) Selector Switch Lockout Reset Plate Sealing Locknut GO-RL Lens Guard Assembly REPLACEMENT LENS GUARD ASSEMBLIES CATALOG NUMBER GOL3/GOB3/GO23 SERIES GOL4/GOB4 SERIES R E P L A C E M E N T B L A N K N A M E P L AT E S LENS COLOR GO15726-A K I T- 3 5 4 Amber GO15726-B K I T- 3 5 5 Blue GO15726-C K I T- 3 5 6 Clear GO15726-F K I T- 3 5 7 Frosted GO15726-G K I T- 3 5 8 Green GO15726-R K I T- 3 5 9 Red CATALOG NUMBER DESCRIPTION YOKK-9484-2 Push button pilot lights YOKK-10291 Double push button YOKK-10286 2 Position selector switch YOKK-10287 3 Position selector switch YOKK-10285 4 Position selector switch C39 C49 G SERIES • CONTROLS A C C E S S O R I E S / R E P L A C E M E N T PA R T S GOMLOCK Standard Mushroom Momentary Jumbo Mushroom Momentary ACCESSORIES CATALOG NUMBER FOR USE ON OPERATOR TYPE DESCRIPTION GOMLOCK GOM1-GOM21-GOML-GO1-GO21-GOL1 Lock Out for Standard Size Momentar y & Maintained Head GOMSTG GO1-GO21-GOL1 Standard Size Momentar y Mushroom Head (Green) GOMSTR GO1-GO21-GOL1 Standard Size Momentar y Mushroom Head (Red) GOMSTK GO1-GO21-GOL1 Standard Size Momentar y Mushroom Head (Black) GOMJUR GO1-GO21-GOL1 Jumbo Size Momentar y Mushroom Head (Red) Dimensions - Standard Mushroom - 1-1/2” Diameter Jumbo Mushroom - 2-1/4” Diameter Replacement Parts Bayonet Base GOL3/GOL4 GOB3/GOB4 Slide Base GO23 Contact Block G O S TA N D A R D C O N TA C T B L O C K S PILOT LIGHT LAMPS CATALOG NUMBER GO-8668-120 VOLTS 120 GO-8668-24 24 YOSY120MB 120 YOSY24MB WATTS 3 24 AMPS 0.025 STYLE GO23 1.7 0.073 3 0.025 GOB3/GOL3 1.7 0.073 GOB4/GOL4 LED Lamp for G0B3/G0L3 - G0B4/G0L4 PILOT LIGHT LED LAMPS CATALOG NUMBER VOLTS COLOR GOLED-A110 110 VAC/DC Amber GOLED-B110 110 VAC/DC Blue GOLED-G110 110 VAC/DC Green GOLED-R110 110 VAC/DC Red GOLED-W110 110 VAC/DC White GOLED-A24 24 VAC/DC Amber GOLED-B24 24 VAC/DC Blue GOLED-G24 24 VAC/DC Green GOLED-R24 24 VAC/DC Red GOLED-W24 24 VAC/DC White CATALOG NUMBER DESCRIPTION GO-8672-BJK 1 N.O. GO-8672-BJJ 1 N.C. GO-8672-BJH 1 N.O. Early make GO-8672-BJE 1 N.C. Late break C C40 G SERIES • CONTROLS C U S T O M O P E R AT O R O R D E R I N G S Y S T E M Example: GO1 — FORM SINGLE PUSH BUTTON LONG STYLE RX COLOR (RED) 2 CONTACTS (1 N.C.) B NAMEPLATE (STOP) N34 CONSTANT NOTE: For faster delivery on custom operators order push buttons and selector switches without contact blocks and order contacts as a separate item. F E AT U R E S - S P E C I F I C AT I O N S 1. Select operator form and style (short, long or extended). 2. Using the catalog numbering system below, insert the proper letter or number symbol as shown in appropriate charts on page C41, write the complete catalog number. CATALOG SERIES COLOR VOLTAGE POSITION 3. Spaces in catalog numbering system which have symbol already filled in cannot be changed. 4. Order accessories as separate item from pages C38 & C39. CAM CONTACTS NAMEPLATE KEY LOCK 5. Add “N34” suffix to the end of all long style operators with the following prefix; G01, G02, G0B3, G0B4, G05, G06, G07, G08, G010, G011, G014, G015, G036, G037, G038, G039. KEY TYPE DESCRIPTION GO1 & GO21 GOL1 Chart 1 Chart 4 Chart 8 Single push button: (Momentar y contact) GOM1 Chart 1 Chart 4 Chart 8 Single push button: (Maintained contact) GO2 & GO22 GOL2 Chart 2 Chart 4 Chart 8 Double push button: (Momentar y contact) GOR11 Chart 2 Chart 4 Chart 8 Double push button: (Maintained contact) GOB3 & GO23 GOL3 Chart 3 Chart 6 Chart 8 Pilot light GOB4 GOL4 Chart 3 Chart 6 Chart 4 Chart 8 Illuminated push button Chart 4 Chart 8 Selector switch (Maintained contact) GO6 & GO26 GOL6 Chart 4 Chart 8 Selector switch (2 Position, spring return to left) GO7 & GO27 GOL7 Chart 4 Chart 8 Selector switch (3 Position, return to center from center) GO14 & GO34 GOL14 Chart 4 Chart 8 Selector switch (3 Position, return to center from right) GO15 & GO35 GOL15 Chart 4 Chart 8 Selector switch (3 Position, return to center from left) Chart 4 Chart 8 Chart 9 Chart 10 Key selector switch (Maintained contact) GO36 & GO56 GOL36 Chart 4 Chart 8 Chart 9 Chart 10 Key selector switch (2 Position, spring return to left) GO37 & GO57 GOL37 Chart 4 Chart 8 Chart 9 Chart 10 Key selector switch (3 Position, spring return to center) GO38 & GO58 GOL38 Chart 4 Chart 8 Chart 9 Chart 10 Key selector switch (3 Position, return to center from right) GO39 & GO59 GOL39 Chart 4 Chart 8 Chart 9 Chart 10 Key selector switch (3 Position, return to center from left) GO5 & GO25 GOL5 GO8 & GO28 GOL8 Chart 5 Chart 5 Chart 7 Chart 7 C41 H A Z A R D O U S A N D H O S T I L E L O C AT I O N S G S Y M B O L S F O R O R D E R I N G C U S T O M O P E R AT O R S CHART 7A – SELECTOR SWITCH CAMS CHART 1 – SINGLE BUTTON GOL1 GOM1 GO1 GO21 SYMBOL SYMBOL SYMBOL SYMBOL COLOR KX KZ K KM Black RX RZ R RM Red GX GZ G GM Green CAM AND CONTACT SELECTION TABLE FOR 2 AND 3 POSITION SELECTOR OPERATOR Left position Center position Right position CHART 2 – DOUBLE BUTTON SYMBOL COLOR KK Black/Black GG Green/Green RR Red/Red RG Red/Green KR SYMBOL CONTACTS BLOCKS A Black/Red KG Black/Green B C CHART 3 – PILOT LIGHT LENS SYMBOL COLOR A Amber B Blue C Clear F Frosted G Green R Red E G 1 One N.O. block 2 One N.C. block 3 One universal (One N.O. and one N.C.) 4 One delayed break N.C. block 5 One early make N.O. block 6 Two N.O. blocks 7 Two N.C. blocks 8 Two universal (Two N.O. and two N.C.) 0 Omit contact block CHART 5 – SELECTOR SWITCHES NO. OF POSITIONS 2 Two 3 Three CAM LEFT RIGHT BLOCKS BLOCKS X X O NO O O X X NC X O X NO O NC X O X X O X O O X O X O O O O NO O O O O X X NC O O X X O O NO O O O O X X NC O O X X O O NO X X O O O O NC X O O X O O NO O O O O X X PART NUMBER A 0106775B B 11586ABAB C 11587ABAB D 11588ABAB E 11589ABAB G 11590ABAB NAMEPLATE MARKINGS FRONT SYMBOL G SERIES FORMS THAT NAMEPLATE CAN BE USED ON BACK A Omit nameplate Omit nameplate B Start Stop GO1, 21, 23, 20, 40, GOB3 C Blank Reset GO1, 21, 23, 20, 40, GOB3, GOB4 All E Blank On GOR4 F Blank-Blank Off-On GO5, 25, 6, 26, 8, 28, 10, 30, 36, 56 G Blank-Blank-Blank Hand-Off-Auto GO5, 25, 7, 27, 8, 28, 10, 30, 14, 34 H Blank-Blank-Blank-Blank Start-Stop GO5, 25, 10, 30 CHART 10 - KEY STYLE TYPE 22 2 Position key remove left 20 2 Position key remove both 23 23 120 32 3 Position key remove center 4 4 24 30 3 Position key remove all VOLTAGE C C H A R T 8 – N A M E P L AT E S 1 SYMBOL CHART 6 – PILOT LIGHT LAMPS GOB3/GOB4 SYMBOL RIGHT BLOCKS NC CHART 9 – KEY LOCK GO23 SYMBOL LEFT BLOCKS CHART 7B ARRANGEMENT SYMBOL RIGHT BLOCKS Note: Spring return operators are supplied with special fixed cam. Changes cannot be made for cam substitution. C H A R T 4 – C O N TA C T B L O C K S SYMBOL D LEFT BLOCKS SYMBOL TYPE D Keys different A Keys alike 1 Symbol not required on extended length GOL part number. C42 G SERIES • CONTROLS DIMENSIONS Push Buttons G DIMENSIONS SERIES FIGURE A D C B GO1 1 15/16"(24) 1-3/4"(44) 3-7/16"(87) 1-1/4"(32) GO2 3 13/16"(21) 2"(51) 3-3/4"(95) — GOB3 4 1-1/8"(29) 2"(51) 2-3/4"(70) 1-9/16"(40) GOB4 5 2-3/8"(60) 2-1/4"(57) 4"(101) 1-13/16"(46) GO5 9 1-5/16"(33) 1-3/4"(44) 3-7/16"(87) 1-1/4"(32) GO6,GO7,GO14,GO15 9 1-5/16"(33) 1-3/4"(44) 3-13/16"(97) 1-1/4"(32) GO8 10 2-9/16"(65) 1-3/4"(44) 3-1/2"(89) 1-1/4"(32) GO10 11 1-5/16"(33) 1-3/4"(44) 4"(101) 1-1/4"(32) GO16,GO18 7 1-1/4"(32) 1"(25) 13/16"(21) 1-1/2"(38) GO17,GO19 7 13/16"(21) 1"(25) 13/16"(21) 1-1/2"(38) GO21 1 15/16"(24) 3/4"(19) 2-7/16"(62) 1-1/4"(32) GO22 3 13/16"(21) 1"(25) 2-3/4"(70) — GO23 4 1-1/8"(29) 1"(25) 1-3/4"(44) 1-9/16"(40) GO25 9 1-5/16"(33) 3/4"(19) 2-7/16"(62) 1-1/4"(32) GO26,GO27,GO34,GO35 9 1-5/16"(33) 3/4"(19) 2-13/16"(71) 1-1/4"(32) GO30 11 1-5/16"(33) 3/4"(19) 3"(76) 1-1/4"(32) GO36,GO37,GO38,GO39 10 2-9/16"(65) 1-3/4"(00) 3-7/8"(98) 1-1/4"(32) GO40 2 15/16"(24) 11/16"(17) 1"(25) 1-1/4"(32) GO50 7 1-1/2"(38) 2"(51) 6-5/16"(160) 2-5/16"(59) GO51 7 2-1/4"(57) 1-5/8"(41) 5-9/16"(141) 1"(25) GO56,GO57,GO58,GO59 10 2-9/16"(65) 3/4"(19) 2-7/8"(73) 1-1/4"(32) GO113,GO114 6 1"(25) 2"(51) 3-5/8"(67) 1-13/16"(46) GO133,GO134 6 1"(25) 1"(25) 2-5/8"(67) 1-13/16"(46) GO-11388-078 8 1-5/16"(33) 3/4"(19) N/A 1-1/2"(38) GO-11372-093 8 1-5/16"(33) 3/4"(19) N/A 1-1/2"(38) GOR11 3 13/16"(21) 2"(51) 4-1/8"(105) — GO-RST 2 15/16"(24) 2-5/16"(59) 2-3/8"(+6")(60) 1-1/4"(32) GOM1 1 1-7/8"(48) 1-7/16"(37) 4"(101) 1-5/8"(41) GOL1 1 15/16"(24) 2-3/4"(70) 4-7/16"(113) 1-1/4"(32) GOL2 3 13/16"(210) 2-3/4"(70) 4-1/2"(114) — GOL3 4 1-1/8"(29) 2-3/4"(70) 3-3/8"(86) 1-9/16"(40) GOL4 5 2-3/8"(60) 2-3/4"(70) 4-5/8"(117) 1-13/16"(46) GOL5 9 1-5/16"(33) 2-3/4"(70) 4-7/16"(113) 1-1/4"(32) GOL6,GOL7,GOL14,GOL15 9 1-5/16"(33) 2-3/4"(70) 4-13/16"(122) 1-1/4"(32) GOL8 10 2-9/16"(65) 2-3/4"(70) 4-1/2"(114) 1-1/4"(32) GOL36,GOL37,GOL38,GOL 10 2-9/16"(65) 2-3/4"(70) 4-7/8"(124) 1-1/4"(32) GOL113,GOL114 6 1"(25) 3"(76) 4-5/8"(117) 1-13/16"(46) GOLRST 2 15/16"(24) 2-3/4"(70) 3"(+6")(76) 1-1/4"(32) FIGURE 1 FIGURE 2 FIGURE 3 Pilot Lights EXTENDED LENGTH OPERATORS: NOTE: All operators are for installation into a 3/4"-14 NPSM opening except GO50 which is for 1-1/4"-11-1/2 NPSM and GO-11388-078 + GO-11372-093 which are for use in a 3/4"-14 NPT opening. FIGURE 4 FIGURE 5 Special Operators FIGURE 6 FIGURE 7 FIGURE 8 Selector Switches FIGURE 9 FIGURE 10 FIGURE 11 C43 B7 SERIES • CONTROLS M A G N E T I C M O T O R S TA R T E R S Class I, Div. 1 & 2, Groups B,C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) Classified - File E83969 Certified - File LR11714 Line Starter Combination Starter See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Applications The PRISM® B7 Series of across-theline starter and combination motor control centers utilize SSNR single-speed, non-reversing NEMA type starters. Prism enclosures universal design accommodates, as standard, the magnetic starters made by the following manufacturers: • Allen-Bradley — 509 Series • Cutler-Hammer — A10 Series • Cutler-Hammer — AN16 Series • Furnas — Class 14 Series • GE — CR306 Series • Square D — 8536 Series • Telemecanique — A20 Series • Westinghouse — A200 Series In addition, the SSNR combination starters will house a motor circuit protector or circuit breakers manufactured by: • Square D — FA, FH, FC Frames • Cutler-Hammer –– HMC, EHD, FDB, FD, HFD, FDC Frames • General Electric –– TEB-TEC-TEDTHED-Frame There is sufficient space in the combination starter enclosure for a control transformer, if required. Standard Materials Enclosure – Copper-free aluminum O-ring Gasket – BUNA-N nitrile Cover Bolts – 316 grade stainless steel CB/MCP Handle – Copper-free aluminum Reset Operator – Thermoplastic polyester button molded onto stainless steel shaft. Aluminum shroud. Mounting Pan – Sheet aluminum Hinge – Aluminum with stainless steel pin Reset Shroud – Black anodized Features • Nema 4, 4X rated – providing protection from hose directed water and corrosion • Universal mounting pan, pre-drilled to facilitate easy field installation of starters. Provision for grounding supplied as standard. • More wiring room – meets latest NEC wire bend requirements • Quick release, captivated cover bolts of 316 grade stainless steel • Flange sealing gasket located to the inside of cover bolt – preventing water seepage into enclosure through bolt holes • Hinged cover provided as standard for an extra measure of safety and convenience • Breaker (MCP) handle can be padlocked in “ON” or “OFF” position • Provisions provided for drain and breather plus conduit openings for power and control • Reset button provided as standard • Two control operator openings provided plugged as standard. Additional openings can be factory or field drilled. • Copper-free (less than 4/10 of 1% copper) enclosure • Ductile mounting lugs Catalog Logic See page C48 for enclosures with controls. C C44 B7 SERIES • CONTROLS M A G N E T I C M O T O R S TA R T E R S Class I, Div. 1 & 2, Groups B,C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) Classified - File E83969 Certified - File LR11714 Line Starter Combination Starter See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Magnetic Line Starters - 3 Pole, 3 Phase, Single Speed Non Reversing 600 VAC Max, 60Hz Square D or Cutler-Hammer motor starters available as standard. Heaters not included. See page C49 to order. B 7 M A G N E T I C L I N E S TA R T E R S NEMA STARTER SIZE MOTOR VOLTS CATALOG NUMBER COIL MAX. HP CUTLER-HAMMER SQUARE D VOLTS 1 SERIES AN16 SERIES 8536 B7010SB B7010HB — 120 0 SEP. CONTROL 0 230 240 3 B7010HG B7010SG 0 460 480 5 B7010HK B7010SK 0 575 600 5 B7010HM B7010SM 1 SEP. CONTROL 120 — B7011HB B7011SB 1 230 240 7-1/2 B7011HG B7011SG 1 460 480 10 B7011HK B7011SK 1 575 600 10 B7011HM B7011SM 2 SEP. CONTROL 120 — B7012HB B7012SB 2 230 240 15 B7012HG B7012SG 2 460 480 25 B7012HK B7012SK 2 575 600 25 B7012HM B7012SM 3 SEP. CONTROL 120 — B7013HB B7013SB 3 230 240 30 B7013HG B7013SG 3 460 480 50 B7013HK B7013SK 3 575 600 50 B7013HM B7013SM 4 SEP. CONTROL 120 — B7014HB B7014SB 4 230 240 50 B7014HG B7014SG 4 460 480 100 B7014HK B7014SK 4 575 600 100 B7014HM B7014SM 1 See catalog logic page C48 for other standard coil voltages. ENCLOSURE ONLY NO INTERIORS B7011 B7011 B7012 B7013 B7014 2 Control transformers for use on Combination Starters Only. Will not fit into B701 Series of Non- Combination Starters. 3 See catalog page C48 for modifications and accessories to enclosure. C45 B7 SERIES • CONTROLS M A G N E T I C M O T O R S TA R T E R S Combination Starters 3-Pole, 3-Phase, Single Speed Non Reversing 600 VAC Max, 60Hz Square D or CutlerHammer motor starters and motor circuit protector available. Heaters not included. See page C49 to order. Enclosure sized to accommodate control circuit transformer. B 7 C O M B I N AT I O N M A G N E T I C L I N E S TA R T E R S NEMA MOTOR STARTER VOLTS SIZE SEP. CONTROL 0 COIL MAX. HP VOLTS 1 DISCONNECT TRIP AMPS 3 CATALOG CUTLER-HAMMER SERIES AN16 B7020HBCA NUMBER SQUARE D SERIES 8536 B7020SBAA 120 — 0 SEP, CONTROL 120 — 7 B7020HBCB B7020SBAB 0 SEP, CONTROL 120 — 15 B7020HBCC B7020SBAC 0 230 240 1 7 B7020HGCB B7020SGAB 0 230 240 3 15 B7020HGCC B7020SGAC 0 460 480 1 3 B7020HKCA B7020SKAA 0 460 480 2 7 B7020HKCB B7020SKAB 0 460 480 5 15 B7020HKCC B7020SKAC 0 575 600 1 3 B7020HMCA B7020SMAA 0 575 600 2 7 B7020HMCB B7020SMAB 0 575 600 5 15 B7020HMCC B7020SMAC 1 SEP, CONTROL 120 — 15 B7021HBCC B7021SBAC 1 SEP. CONTROL 120 — 30 B7021HBCF B7021SBAF 1 230 240 7-1/2 30 B7021HGCF B7021SGAF 1 460 480 10 30 B7021HKCF B7021SKAF 1 575 600 10 30 B7021HMCF B7021SMAF 2 SEP. CONTROL 120 — 50 B7022HBCK B7022SBAK 2 SEP, CONTROL 120 — 70 B7022HBCM B7022SBAM 2 230 240 15 50 B7022HGCK B7022SGAK 2 230 240 15 70 B7022HGCM B7022SGAM 2 460 480 25 50 B7022HKCK B7022SKAK 2 575 600 25 50 B7022HMCK B7022SMAK 3 SEP, CONTROL 120 — 100 B7023HBCQ B7023SBAQ 3 230 240 30 100 B7023HGCQ B7023SGAQ 3 460 480 50 100 3 575 600 50 100 B7023HKCQ B7023HMCQ B7023SKAQ B7023SMAQ 4 SEP, CONTROL 120 — 150 B7024HBCT B7024SBBT 4 230 240 50 150 B7024HGCT B7024SGBT 4 460 480 100 150 B7024HKCT B7024SKBT 4 575 600 100 150 B7024HMCT B7024SMBT B7025SBSMAGK250 5 SEP, CONTROL 120 — 250 B7025CBCMCPJ250 5 SEP, CONTROL 120 — 400 B7025CBCMCPK400 B7025SBSMAGL400 5 230 240 75 250 B7025CGCMCPJ250 B7025SGSMAGK250 5 230 240 100 400 B7025CGCMCPK400 B7025SGSMAGL400 5 460 480 150 250 B7025CKCMCPJ250 B7025SKSMAGK250 5 460 480 200 400 B7025CKCMCPK400 B7025SKSMAGL400 5 575 600 150 250 B7025CMCMCPJ250 B7025SMSMAGK250 5 575 600 200 400 B7025CMCMCPK400 B7025SMSMAGL400 ENCLOSURE ONLY NO INTERIORS B7021 B7021 B7022 B7023 B7024 See chart below 1 See catalog logic page C48 for other standard coil voltages. 2 Combination Starter enclosures provide sufficient space for factory of field mounting a control transformer. 3 See catalog page C48 for modifications and accessories to enclosure. S I Z E 5 C O M B I N AT I O N M O T O R S TA R T E R E N C L O S U R E O N LY STARTER MANUFACTURER STARTER TYPE C-H CIRCUIT BREAKER FRAME GE SQ-D ENCLOSURE CAT. NUMBER Allen Bradley Series 509 J F-225 K B7025A2 Allen Bradley Series 509 K J-600 L B7025A4 Cutler Hammer Freedom-AN16 J F-225 K B7025C2 Cutler Hammer Freedom-AN16 K J-600 L B7025C4 General Electric Series 306 J F-225 K B7025G2 General Electric Series 306 K J-600 L B7025G4 Square D Series 8536 J F-225 K B7025S2 Square D Series 8536 K J-600 L B7025S4 Westinghouse Advantage J F-225 K B7025W2 Westinghouse Advantage K J-600 L B7025W4 C C46 B7 SERIES • CONTROLS C O M B I N AT I O N S TA R T E R S Supplied with Cutler-Hammer Advantage Starters Applications The PRISM® B7 Series of Combination Starters are used for Motor Control and Circuit protection of motors in Hazardous And Hostile locations. These Hazardous locations are typically due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers and flyings, and areas which are subject to corrosion, weather and dampness. Advantage Starter Features • Solid-State Electronic Starter • Brownout Protection • Communications capabilities • Overload Heaters not required • Phase loss and phase unbalance protection • Selectable automatic/manual reset • Class ll ground-fault protection Enclosure Features • Nema 4, 4X rated – providing protection from hose directed water and corrosion • Universal mounting pan, pre-drilled to facilitate easy field installation of starters. Provision for grounding supplied as standard. • More wiring room – meets latest NEC wire bend requirements • Quick release, captivated cover bolts of 316 grade stainless steel • Flange sealing gasket located to the inside of cover bolt – preventing water seepage into enclosure through bolt holes • Hinged cover provided as standard for an extra measure of safety and convenience • Breaker (MCP) handle can be padlocked in “ON” or “OFF” position • Provisions provided for drain and breather plus conduit openings for power and control • Field replaceable reset button provided as standard with gold contact blocks • Two control operator openings provided plugged as standard. Additional openings can be factory or field drilled • Copper-free (less than 4/10 of 1% copper) enclosure • Ductile mounting lugs Modifications & Accessories • Select from B7 Modification Chart on page C48 • Minimum Control Transformer • Size 1-2 100VA • Size 3-4 150VA • Size 5 300VA • Advantage Starters Auxiliary Contact Modules Class I, Div. 1 & 2, Groups B,C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) Classified - File E83969 Certified - File LR11714 See files for details or call Killark. Standard Materials Enclosure – Copper-free aluminum O-ring Gasket – BUNA-N nitrile Cover Bolts – 316 grade stainless steel CB/MCP Handle – Copper-free aluminum Reset Operator – Thermoplastic polyester button molded onto stainless steel shaft. Aluminum shroud. Mounting Pan – Sheet aluminum Hinge – Aluminum with stainless steel pin Reset Shroud – Black anodized • 2NO/2NC = B7ADAC B 7 A D C O M B I N AT I O N S TA R T E R NEMA STARTER SIZE 1L MOTOR VOLTS 230 1 460 2 575 2 230 1 2 3 4 5 MAXIMUM HP COIL VOLTS FULL LOAD AMPERAGE RANGE(1) DISCONNECT AMP TRIP 3 120/60 .47-4.14 CATALOG NUMBER WITH MOTOR PROTECTOR AND STARTER ENCLOSURE ONLY B7AD02LH6CA 7 B7AD02LH6CB 15 B7AD02LH6CC B7AD021 7-1/2 460 10 575 10 230 15 460 25 575 25 230 30 460 50 575 50 230 50 460 100 575 100 230 100 460 200 575 200 120/60 3.15-27 30 B7AD021H6CF B7ADO21 120/60 3.15-45 50 B7AD022H6CK B7AD022 120/60 9.9-90 100 B7AD023H6CQ B7AD023 120/60 9.9-133 150 B7AD024H6CT B7AD024 120/60 38.3-270 400 B7AD025H6K400 B7AD025K Notes: (1) Heaters are not required with the Advantage Starter. The Overload Module has trip current settings via DIP Switch between the amperage range shown. (2) All Advantage Starters are wired for separate control and must be controlled at the coil voltage shown. For 50 HZ applications a 110V 50 Hz coil is available. To order with this 50 Hz coil replace the number “6” in catalog number with “5”. (3) Enclosures provide sufficient space for factory or field mounting a control transformer. C47 B7 SERIES • CONTROLS M O T O R S TA R T E R S D I M E N S I O N S B7 DIMENSIONS CATALOG NUMBER NEMA SIZE DIMENSIONS TYPE A B C D 9-1/8" 3-5/8" (280) (232) (92) (416) (54) 12-1/2" 9-1/8" 5" 18-3/8" 2-1/2" (317) (232) (127) (467) (63) (63) 26-1/4" 12-1/2" 10-3/4" 5" 24-5/8" 2-1/2" 2-3/4" 4-1/16" 5-1/2" (667) (317) (276) (127) (625) (63) (70) (103) (140) Starter Only 34-1/4" 16-1/2" 11-1/2" 9" 32-5/8" 3-3/4" 4" 4-7/16" 6" (870) (419) (292) (229) (830) (95) (102) (113) (152) Combination Starter 23" 14-1/2" 9-1/8" 7" 21-3/8" 2-1/8" 2-1/2" 2-11/16" 3-7/16" (584) (368) (232) (178) (543) (54) (64) (68) (87) B7011 0,1 Starter Only 18" (457) B7012 2 Starter Only 20" (508) Starter Only B7013 B7014 B7021 B7022 B7023 B7024 3 4 0,1 2 3 4 11" E 16-3/8" F G 2-1/8" H 2-3/8" I 2-11/16" 3-7/16" (60) (68) (87) 2-1/2" 2-11/16" 3-3/16" (68) (81) 25-1/2" 14-1/2" 9-1/8" 7" 23-7¼8" 2-1/8" 2-1/2" 2-11/16" 3-7/16" (648) (368) (232) (178) (606) (54) (64) (68) (87) Combination Starter 27-1/4" 17-7/8" 11" 10-3/8" 25-5/8" 3-1/2" (692) (454) (280) (263) (651) (89) Combination Starter 34-1/4" 21-1/2" 11-7/8" 14" 32-5/8" 4-3/4" 5" 4-9/16" (870) (546) (302) (356) (829) (121) (127) (116) Combination Starter 3-1/2" (89) 4-3/16" (106) 5-1/2" EST. CONDUIT OPENINGS ENCLOLSRE TOP/BOTTOM (IN.)1 WEIGH DRAIN POWER CONTROL LBS. BREATHER 46 1-1/2" 3/4" 1/2" 56 1-1/2" 3/4" 1/2" 80 2" 1" 1/2" 155 3" 1" 1/2" 78 1-1/2" 3/4" 1/2" 88 1-1/2" 3/4" 1/2" 143 2" 1" 1/2" 235 3" 1" 1/2" (140) 6-3/16" (157) 1 1/2" conduit openings may be used for drain and/or breather installation. Smaller conduit openings may be used by utilizing reducing bushings. Custom conduit sizes and locations are available upon request. D I M E N S I O N S F O R S I Z E 5 C O M B I N AT I O N S TA R T E R A 62-1/4" (1581) B 20-1/4" (514) C 15" (381) Dimensions B7 Size 0 Thru 4 D 18-1/2" (470) DIMENSIONS E F 43-1/2" (1105) 2-5/8" (67) G H I 3-1/8" (79) 5-3/8" (137) 7-3/8" (187) J 3-1/2 (89) CONDUIT TOP & BTM. (NPT) K L M 4" (102) 1/2" (13) 1" (25) ENCL. WT. (LBS.) 540 Dimensions B7 Size 5 C C48 B7 SERIES • CONTROLS M O T O R S TA R T E R S A C C E S S O R I E S / C ATA L O G L O G I C B 7 M O D I F I C AT I O N S A N D A C C E S S O R I E S ( C O N T I N U E D ) B 7 M O D I F I C AT I O N S A N D A C C E S S O R I E S CATALOG NUMBER SIZE 0 THRU 4 SIZE 5 DESCRIPTION CATALOG NUMBER SIZE 0 THRU 4 SIZE 5 DESCRIPTION B7DBP B7EDBP Double pushbutton (Start/Stop) B7CT100 — Control transformer 100VA (0,1,2)* B7RPL B7ERPL Red pilot light 120 Volt B7CT150 — Control transformer 150VA (0,1,2)* B7GPL B7EGPL Green pilot light 120 Volt B7CT200 — Control transformer 200VA (3,4)* B7APL B7EAPL Amber pilot light 120 Volt B7CT250 — Control transformer 250VA (3,4)* B7LPBR B7ELPBR Illuminated red pushbutton 120 Volt — B7CT300 Control transformer 300VA (5)* B7LPBG B7ELPBG Illuminated green pushbutton 120 Volt — B7CT500 Control transformer 500VA (5)* B7LPBA B7ELPBA Illuminated amber pushbutton 120 Volt KB1B KB1B Breather** (not CSA) B7PLR220 B7PLR220 Pilot light resistor 220 Volt to 110 Volt KB1D KB1D Drain** (not CSA) B7PLR440 B7PLR440 Pilot light resistor 440 Volt to 110 Volt K I T- 2 5 1 K I T- 2 5 1 Grounding kit B7PLR550 B7PLR550 Pilot light resistor 550 Volt to 110 Volt B7SF B7SF Special finish - Baked epoxy outside B72SS B7ESS 2 position selector switch ( On-Off ) B7DLO B7DLO Delete lock “”ON”” feature for breaker handle B7SSHOA B7ESSHOA 3 position selector switch ( Hand-Off-Auto ) B7SH251 B7SH251 Space heater 25 Watt 120 Volt B7HAC B75CAC Cutler Hammer auxiliar y contact (1NO/1NC) B7SH252 B7SH252 Space heater 25 Watt 240 Volt B7SAC B75SAC Square D auxiliar y contact (1NO/1NC) B7SH254 B7SH254 Space heater 25 Watt 480 Volt B7TB B7TB Terminal block ( 6 Terminals ) B7SH501 B7SH501 Space heater 50 Watt 120 Volt — B7IPR Interposing relay 120 Volt coil B7SH502 B7SH502 Space heater 50 Watt 240 Volt B7CT50 — Control transformer 50VA (0,1,2)* B7SH504 B7SH504 Space heater 50 Watt 480 Volt B7CT75 — Control transformer 75VA (0,1,2)* * Control transformers are primary 240/480 - Secondary 120 Volt. Control transformers for use on Combination Starters Only. Will not fit into B701 Series of Non-Combination Starters. * All control transformers include fused primary and secondary circuits. ** Installation of drains and breathers will void the NEMA4-4x ratings - voids Group B for CSA. Catalog Logic – B7 Enclosures with Controls B7 Series Constant Starter Type 01—Non-Combination (SSNR) 02—Combination (SSNR) Starter Size 0 1 2 3 4 Starter Coil Voltage A—110V-60HZ B—120/110V-60/50HZ C—120/240V=60/50HZ D—208/220V-60HZ E—208/220/480V-60HZ F—220V-60HZ G—240/220V-50/60HZ H—240/480V-60HZ J—440/380V-60/50HZ K—480/440V-60/50HZ L—550V-60HZ M—600/550V-60/50HZ N—600V-50HZ V—Specify Voltage Disconnect Means A—Sq. D. FAL Mag Guard B—Sq. D. KAL Mag Guard C—Cutler-Hammer HMCP Motor C.R. Protector D—Sq. D. FAL Thermal Magnetic E—Sq. D. FHL Thermal Magnetic F—Sq. D. FCL Thermal Magnetic G—Sq. D. KAL Thermal Magnetic H—Sq. D KHL Thermal Magnetic J—Sq. D. KCL Thermal Magnetic K—Cutler-Hammer EHD Thermal Magnetic L—Cutler-Hammer FDB Thermal Magnetic M—Cutler-Hammer FD Thermal Magnetic N—Cutler-Hammer HFD Thermal Magnetic P—Cutler-Hammer FDC Thermal Magnetic Starter Manufacturer S—Square D H—Cutler-Hammer (Freedom) This Catalog Logic Chart is for reference only and is to be used for selection of special voltage and amperage requirements. Consult Factory since not all assemblies are available with complete list of options displayed. Disconnect Current Rating A—3 AMP B—7 AMP C—15 AMP D—20 AMP E—25 AMP F—30 AMP G—35 AMP H—40 AMP J—45 AMP K—50 AMP L—60 AMP M—70 AMP N—80 AMP P—90 AMP Q—100 AMP R—110 AMP S—125 AMP T—150 AMP U—175 AMP V—200 AMP W—225 AMP X—250 AMP C49 O V E R L O A D H E AT E R S / N O N - R E V E R S I N G • C O N T R O L S 3 - P O L E , 6 0 H Z , 6 0 0 VA C S I N G L E - S P E E D Overload heaters are not supplied as part of the starter assemblies and are to be ordered as separate items by catalog number and priced accordingly. Heaters should be selected on the basis of the actual full-load current and service factor as shown on the motor nameplate or in the manufacturer’s published literature. When motor and overload relay are in the same ambient and the service factor of the motor is 1.15 to 1.25, select heaters from the heater selection chart. If the service factor of the motor is 1.0, or there is no service factor shown, or a maximum of 115% protection is desired, select one size smaller heater than indicated. When motor and overload relay are in different ambients, select heaters from the chart using adjusted motor currents as follows: decrease rated motor current 1% for each ÞC motor ambient exceeds controller ambient; increase rated motor current 1% for each ÞC controller ambient exceeds motor ambient. S Q U A R E D 8 5 3 6 S E R I E S S TA R T E R S S S N R N E M A S I Z E S 0 - 1 T H R O U G H 5 CATALOG NUMBER KB044 KB051 KB057 KB063 KB071 KB081 KB092 KB103 KB116 KBI30 KBI45 KB167 KB188 KB210 KB240 KB265 KB330 KB300 KB370 KB415 KB485 KB550 KB625 KB690 KB770 KB820 KB910 KB102 KB115 KB128 KB014 KB155 KB175 KB195 KB022 FULL-LOAD CURRENT (AMPS) FOR SIZE 0-1 0.28-0.30 0.31-0.34 0.35-0.37 0.38-0.44 0.45-0.53 0.54-0.59 0.60-0.64 0.65-0.72 0.73-0.80 0.81-0.90 0.91-1.03 1.04-1.14 1.15-1.27 1.28-1.43 1.44-1.62 1.63-1.77 1.78-1.97 1.98-2.32 2.33-2.51 2.52-2.99 3.00-3.42 3.43-3.75 3.76-3.98 3.99-4.48 4.49-4.93 4.94-5.21 5.22-5.84 5.85-6.67 6.68-7.54 7.55-8.14 8.15-8.72 8.73-9.66 9.67-10.5 10.6-11.3 11.4-12.0 CATALOG NUMBER KB022 KB025 KB280 KB032 KB036 KB040 KB045 KB050 KB485 KB550 KB625 KB690 KB770 KB820 KB910 KB102 KB115 KB128 KB014 KB155 KB175 KB195 KB022 KB025 KB280 KB032 KB036 KB040 KB045 KB050 KB056 KB062 KB070 KB079 KB088 FULL-LOAD CURRENT (AMPS) CATALOG NUMBER FOR SIZE 1 11.4-12.7 12.8-14.1 14.2-15.9 16.0-17.5 17.6-1 9.7 19.8-21.9 22.0-24.4 24.5-26.0 FOR SIZE 2 3.18-3.40 3.41-3.76 3.77-4.00 4.01-4.57 4.58-5.03 5.04-5.32 5.33-5.97 5.98-6.88 6.89-7.82 7.83-8.47 8.48-9.15 9.16-10.1 10.2-11.2 11.3-12.0 12.1-13.6 13.7-15.2 15.3-17.1 17.2-19.0 19.1-21.5 21.6-24.1 24.2-27.0 27.1-28.7 28.8-30.4 30.5-32.2 32.3-35.4 35.5-38.2 38.3-45.0 KCC209 KCC228 KCC246 KCC263 KCC288 KCC310 KCC333 KCC364 KCC396 KCC427 KCC466 KCC501 KCC545 KCC594 KCC643 KCC685 KCC749 KCC815 KCC877 KCC940 KCC103 KCC112 KCC121 KCC132 KCC143 KCC156 KCC167 KCC180 KCC196 FULL-LOAD CURRENT (AMPS) CATALOG NUMBER FOR SIZE 3 13.6-14.5 14.6-15.5 15.6-17.4 17.5-18.5 18.6-19.9 20.0-21.5 21.6-22.9 23.0-24.5 24.6-26.3 26.4-28.2 28.3-30.0 30.1-32.3 32.4-34.9 35.0-37.6 37.7-40.0 40.1-42.8 42.9-45.3 45.4-49.1 49.2-53.4 53.5-57.4 57.5-61.3 61.4-63.5. 63.6-66.3 66.4-69.0 69.1-70.9 71.0-73.7 73.8-76.5 76.6-78.4 78.5-86.0 KCC643 KCC685 KCC746 KCC815 KCC877 KCC940 KCC103 KCC112 KCC121 KCC132 KCC143 KCC156 KCC167 KCC180 KCC196 KCC208 KCC219 KDD112 KDD121 KDD128 KDD140 KDD150 KDD160 KDD185 KDD220 KDD240 KDD250 KDD265 KDD280 KDD300 KDD320 KDD320 FULL-LOAD CURRENT (AMPS) FOR SIZE 4 41.1-43.5 43.6-46.8 46.9-50.0 50.1-54.9 55.0-57.5 57.6-61.8 61.9-66.2 66.3-72.4 72.5-78.1 78.2-80.7 80.8-86.5 86.6-93.9 94.0-100 101.-112. 113.-117. 118.-123. 124.-133. FOR SIZE 5 82.5-88.2 88.3-95.9 96.0-102. 103.-109. 110.-121. 122.-139. 140.-154. 155.-163. 164.-175. 176.-184. 185.-195. 196.-215. 216.-224. 225.-243. 244.-266. C NOTE: Square D 8536 series starters SSNR ambient compensated 20ÞC to 60ÞC block type overload using 3 heaters. Three required for each starter. C U T L E R - H A M M E R H E AT E R ( E A C H H E AT E R P A C K C O N S I S T S O F 3 H E AT E R S ) CATALOG NUMBER KH2001B-3 KH2002B-3 KH2003B-3 KH2004B-3 KH2005B-3 KH2006B-3 KH2007B-3 KH2008B-3 KH2009B-3 KH2010B-3 KH2011B-3 KH2012B-3 KH2013B-3 KH2014B-3 MOTOR FULL-LOAD AMPERE RATING DIAL POSITION A B FOR SIZES 0-1 .306 .254 .452 .375 .676 .560 .983 .814 1.45 1.20 2.16 1.79 2.60 2.15 3.90 3.23 5.50 4.55 8.17 6.75 10.8 9.14 16.9 14.0 22.7 18.7 28.5 23.5 C .359 .530 .791 1.15 1.71 2.53 3.04 4.56 6.45 9.58 12.4 19.9 26.7 33.5 D .411 .607 .907 1.32 1.96 2.90 3.49 5.23 7.40 11.0 14.0 22.8 30.7 38.5 CATALOG NUMBER KH2015B-3 KH2016B-3 KH2017B-3 KH2018-3 KH2019-3 KH2020-3 KH2021-3 KH2022-3 KH2023-3 KH2024-3 KH2004B-3 KH2005B-3 KH2006B-3 KH2007B-3 KH2008B-3 MOTOR FULL-LOAD AMPERE RATING DIAL POSITION A B FOR SIZE 2 34.0 29.0 45.5 39.6 60.9 53.9 FOR SIZES 3-4 20.2 18.0 27.6 24.6 37.5 33.5 51.2 45.7 69.7 62.2 95.0 84.7 118.0 106.0 FOR SIZE 5 59 49 87 72 130 107 156 129 234 194 C D 39.1 51.5 67.9 44.1 57.4 74.9 22.3 30.5 41.5 56.7 77.1 105.0 131.0 24.5 33.4 45.6 62.1 84.6 115.0 144.0 69 103 152 182 274 79 118 174 209 --- C50 Y7 SERIES • CONTROLS M O T O R S TA R T E R S - M A G N E T I C L I N E S TA R T E R S Class I, Div. I & 2, Groups C,D Class 1, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Certified - File LR11714 FM APPROVED Y7011ZH Contact Killark for FM file numbers. See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Applications • Hazardous areas due to the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers or flyings • Installations at petroleum refineries, chemical and petrochemical plants, storage areas and other processing facilities where hazardous substances are handled or stored • Full-voltage, across-the-line starting and stopping of polyphase AC squirrel cage induction motors or as the primary starter for wound rotor motors • Provides running and undervoltage protection of motor • Remote starting and stopping of motor Features • Rectangular bolted cover design provides for attractive, compact, uniform installations • Ground flange joint between box and cover provides required flame path • Two drilled and tapped power conduit openings, one top and one bottom are standard on all assemblies. • One 3/4"-14 NPT drilled, tapped and plugged conduit opening is provided in bottom for remote control • Two 3/4"-14 NPSM drilled, tapped, and plugged openings in cover are provided for addition of local control operator • External reset button and stainless steel cover bolts are standard • Hinges are either stainless steel or aluminum and are mounted on the left side of all assemblies • Enclosure is cast copper-free aluminum alloy • Available for Cutler-Hammer AN16 Freedom or Square D 8536 starters Overload Heaters Heaters not included. See page C49 for heater selection Dimensions See page C52 for dimensional data Modifications See page C52 Y 7 M A G N E T I C L I N E S TA R T E R ( E N C L O S U R E S W I T H O U T S PA C E F O R C O N T R O L T R A N S F O R M E R ) NEMA STARTER SIZE MOTOR VOLTS 0 0 CATALOG NUMBER COIL VOLTS MAXIMUM HP Sep Control 120 — Y7010BH Y7010BS 230 240 3 Y7010DH Y7010DS 0 440-460 480 5 Y7010KH Y7010KS 1 Sep Control 120 — Y7011BH Y7011BS 1 230 240 7-1/2 Y7011DH Y7011DS 1 440-460 480 10 Y7011KH Y7011KS 2 Sep Control 120 — Y7012BH Y7012BS 2 230 240 15 Y7012DH Y7012DS 2 440-460 480 25 Y7012KH Y7012KS CUTLER-HAMMER SERIES AN16 SQUARE D SERIES 8536 0 Enclosure only No interior Y7010ZH Y7010ZS 1 Enclosure only No interior Y7011ZH Y7011ZS 2 Enclosure only No interior Y7012ZH Y7012ZS Y 7 M A G N E T I C L I N E S TA R T E R ( E N C L O S U R E S W I T H S PA C E F O R C O N T R O L T R A N S F O R M E R ) NEMA STARTER SIZE MOTOR VOLTS COIL VOLTS MAXIMUM HP CATALOG NUMBER CUTLER-HAMMER SERIES AN16 SQUARE D SERIES 8536 0 230//460 120 3//5 Y7000BH Y7000BS 1 230//460 120 7 1/2//10 Y7001BH Y7001BS 2 230//460 120 15//25 Y7002BH Y7002BS 0 Enclosure only No interior Y7000ZH Y7000ZS 1 Enclosure only No interior Y7001ZH Y7001ZS 2 Enclosure only No interior Y7002ZH Y7002ZS C51 Y7 SERIES • CONTROLS C O M B I N AT I O N M O T O R S TA R T E R S Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) Certified - File LR11714 FM APPROVED Y7021ZHAZ Contact Killark for FM file numbers. See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Applications • Hazardous areas due to the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers or flyings • Full-voltage, across-the-line starting and stopping of polyphase AC squirrel cage induction motors or as the primary starter for wound rotor motors • Provides running and undervoltage protection of motor • Motor branch circuit disconnect and short circuit protection Features • Rectangular bolted cover design provides for attractive, compact, uniform installations • Two 3/4"-14 NPSM drilled, tapped, and plugged openings are provided for addition of local operators • Two drilled, tapped and plugged openings, one top and one bottom are supplied for installation of drain and breather • Hinges are either stainless steel or aluminum and are mounted on the left side of all assemblies • Circuit breaker handle mechanism interlocks with circuit breaker to prevent opening of enclosure when circuit is in the “ON” position • External handle is vault type with standard provisions for locking in the “OFF” position with up to three padlocks • Circuit breaker is trip free of handle mechanism Dimensions For dimensional data, see page C52. Overload Heaters Heaters are not included. See page C49 for heater selection. Modifications Modifications are available. See page C52. Y 7 C O M B I N AT I O N M A G N E T I C L I N E S TA R T E R NEMA STARTER SIZE MOTOR VOLTS 0 Sep Control 120 - 0 Sep Control 120 - 0 Sep Control 120 0 230 0 COIL VOLTS MAXIMUM HP DISCONNECT TRIP AMPS CATALOG NUMBER CUTLER-HAMMER SERIES AN16 SQUARE D SERIES 8536 3 Y7020BHVV Y7020BSVV 7 Y7020BHVX Y7020BSVX - 15 Y7020BHVA Y7020BSVA 240 1 7 Y7020DHVX Y7020DSVX 230 240 3 15 Y7020DHVA Y7020DSVA 0 460 480 1 3 Y7020KHVV Y7020KSVV 0 460 480 5 7 Y7020KHVX Y7020KSVX 1 Sep Control 120 - 15 Y7021BHVA Y7021BSVA 1 Sep Control 120 - 30 Y7021BHVC Y7021BSVC 1 230 240 7-1/2 30 Y7021DHVC Y7021DSVC 1 460 10 30 Y7021KHVC Y7021KSVC 2 Sep Control 120 50 Y7022BHVE Y7022BSVE 2 Sep Control 120 70 Y7022BHVG Y7022BSVG 2 230 240 15 50 Y7022DHVE Y7022DSVE 2 230 240 15 70 Y7022DHVG Y7022DSVG 2 460 480 25 50 Y7022KHVE Y7022KSVE 480 - 0 Enclosure only. No Interior Y7020ZHVZ Y7020ZSVZ 1 Enclosure only. No Interior Y7021ZHVZ Y7021ZSVZ 2 Enclosure only. No Interior Y7022ZHVZ Y7022ZSVZ C C52 Y7 SERIES • CONTROLS M O T O R S TA R T E R S / M O D I F I C AT I O N S Combination Starter Modifications Modifications are available by ordering the following by catalog number as separate items and noting on the order that they are to be assembled into the enclosure. F E AT U R E S - S P E C I F I C AT I O N S Y 7 M A G N E T I C L I N E S TA R T E R S D I M E N S I O N S NEMA SIZE 0-1 1 21 0-1 2 22 A B D E 6"(152) G H J CONDUIT SIZE POWER CONTROL K 7-3/4"(197) 7-1/4"(184) 10"(254) 2"(51) 7-5/8"(194) 1-1/8"(28) 3/4"(19) 1-1/2" 3/4" 9"(228) 7-3/4"(197) 11-1/4"(286) 6-1/2"(165) 2"(51) 7-5/8"(194) 1-1/8"(28) 7/8"(22) 1-1/2" 3/4" 8-3/4"(222) 11-1/8"(282) 12-1/2"(317) 10-1/2"(267) 2"(51) 8-1/4"(209) 2-3/8"(60) 2-3/8"(60) 1-1/2" 3/4" 8-3/4"(222) 11-1/8"(282) 12-1/2"(317) 10-1/2"(267) 2"(51) 8-1/4"(209) 2-3/8"(60) 2-3/8"(60) 1-1/2" 3/4" H J 1 Without space for control transformer. 2 With space for control transformer. Y 7 C O M B I N AT I O N S TA R T E R S D I M E N S I O N S NEMA SIZE A B D E G CONDUIT SIZE POWER CONTROL 0-1 16-1/4"(413) 11-1/8"(282) 20"(508) 10-1/2"(267) 2"(51) 9"(228) 2-3/8"(60) 1-1/2" 3/4" 2 16-1/4"(413) 11-1/8"(282) 20"(508) 10-1/2"(267) 2"(51) 9"(228) 2-3/8"(60) 1-1/2" 3/4" Dimensions Y 7 M O D I F I C AT I O N S A N D A C C E S S O R I E S DESCRIPTION CATALOG NUMBER Magnetic Line Starters Sizes 0, 1, 2 GO22-GR12D Double pushbutton (Start/Stop) GOB3-R23C N34 Red pilot light 120 Volt GOB3-G23C N34 Green pilot light 120 Volt GOB3-A23C N34 Amber pilot light 120 Volt B7PLR220 Pilot light resistor 220 Volt to 120 Volt B7PLR440 Pilot light resistor 440 Volt to 120 Volt B7PLR550 Pilot light resistor 550 Volt to 120 Volt GO25-2A3F 2 position selector switch (On/Off) GO25-3C3G 3 position selector switch (Hand/Off/Auto) B7HAC Cutler-Hammer auxiliar y contact (1NO/1NC) B7SAC Square D auxiliar y contact (1NO/1NC) B7CT50 Control transformer 50VA* B7CT75 Control transformer 75VA* B7CT100 Control transformer 100VA* KDB-1 Breather KDB-1 Drain KIT-251 Grounding kit * Control transformers are primary 240/480 - Secondary 120 Volt. * All control transformers include fused primary and secondary circuits. Combination Starters Sizes 0, 1, 2 C53 XSD/XSX/FXSD/FXSX SERIES • CONTROLS M A N U A L M O T O R S TA R T I N G S W I T C H E S Class I, Div. 1 & 2, Groups C,D Class 1, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 7(C,D) 9(E,F,G) NEMA 3 (Factory sealed type) Listed - File E53360 and/or E12379 Certified - File LR11714 XSD, XSX, Series Non Factory Sealed FM – File 25219 FM FXSD, FXSX Series Factory Sealed APPROVED See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Applications • Provides manual starting and stopping of small AC or DC motors • Motor running protection when overload heaters are used • XSX/FXSX Series (without overload protection) are ideally suited for across-the-line applications where a positive disconnect means is required Features • FXSX-FXSD Series require no external seals (factory sealed) and are NEMA 3 (raintight) rated • Enclosures are cast copper-free aluminum alloy • Operating shaft is stainless steel • Multiple gang assemblies available in combination with pilot lights, pushbuttons and switches on request • Ground flange joint between bolted cover and box provide required flame path • Provisions for padlocking switch in either “ON” or ”OFF” position is standard Dimensions For dimensional data, see page C54. XSD/FXSD SERIES WITH OVERLOAD PROTECTION1 Factory Sealed: Square D, Class 2510, Type F 1-Pole, 1HP, 115-230 VAC 2-Pole, 1HP, 115-230 VAC 3/4 HP, 115-230 VDC Non-Factory Sealed: Square D, Class 2510, Type F 1-Pole, 1HP, 115-230 VAC 2-Pole, 1HP, 115-230 VAC 3/4 HP, 115-230 VDC XSD SINGLE GANG2 CATALOG NUMBER 1-POLE 2-POLE SINGLE SINGLE PHASE PHASE XSD-11 XSD-12 XSD-21 XSD-22 XSD-41 XSD-42 XSD-51 XSD-52 XSD-01 XSD-02 FXSD SINGLE GANG HUB STYLE HUB SIZE CATALOG NUMBER 1-POLE 2-POLE SINGLE SINGLE PHASE PHASE Dead end 1/2" FXSD11 FXSD12 3/4" FXSD21 FXSD22 1/2" FXSD41 FXSD42 3/4" FXSD51 FXSD52 FXSD01 FXSD02 Feed thru Cover and Switch assembly HUB STYLE HUB SIZE Dead end 1/2" Feed thru 1/2" 3/4" 3/4" Cover and Switch assembl y 1 Order heaters separately on page C54. 2 FM and CSA only C XSX/FXSX SERIES WITHOUT OVERLOAD PROTECTION Non-Factory Sealed: Square D, Class 2510, Type K 2-Pole, 2 HP, 115 VAC 2 HP, 200-230 VAC 3 HP, 460-575 VAC 3-Pole, 2 HP, 115 VAC 7-1/2 HP, 200-230 VAC 10 HP, 460-575 VAC XSX SINGLE GANG1 CATALOG NUMBER 2-POLE 3-POLE 30A., 250V 30A., 250V 20A., 600V 20A., 600V 1-PHASE 3-PHASE XSX-12 XSX-13 XSX-22 XSX-23 XSX-42 XSX-43 XSX-52 XSX-53 XSX-2 XSX-3 1 FM and CSA only Factory Sealed: Square D, Class 2510, Type K 2-Pole, 2 HP, 115 VAC 2 HP, 200-230 VAC 3 HP, 460-575 VAC 3-Pole, 2 HP, 115 VAC 3 HP, 200-230 VAC 5 HP, 460-575 VAC FXSX SINGLE GANG HUB STYLE HUB SIZE CATALOG NUMBER 2-POLE 3-POLE 30A., 250V 30A., 250V 20A., 600V 20A., 600V 1-PHASE 3-PHASE Dead end 1/2" FXSX12 FXSX13 3/4" FXSX22 FXSX23 Feed thru 1/2" FXSX42 FXSX43 3/4" FXSX52 FXSX53 Cover and Switch assembly FXSX02 FXSX03 HUB STYLE HUB SIZE Dead end 1/2" Feed thru 1/2" 3/4" 3/4" Cover and Switch assembly C54 XSD/XSX/FXSD/FXSX SERIES • CONTROLS X S D / X S X / F X S D / F X S X H E AT E R S H E AT E R TA B L E 1 FULL-LOAD MOTOR CURRENT SQUARE D HEATER CATALOG NUMBER YOSD-A.49 0.41-0.44 A.49 YOSD-A.54 0.45-0.49 A.54 YOSD-A.59 0.50-0.53 A.59 YOSD-A.65 0.54-0.58 A.65 YOSD-A.71 0.59-0.65 A.71 YOSD-A.78 0.66-0.71 A.78 YOSD-A.86 0.72-0.78 A.86 YOSD-A.95 0.79-0.85 A.95 YOSD-A1.02 0.86-0.96 A1.02 YOSD-A1.16 0.97-1.04 A1.16 YOSD-A1.25 1.05-1.16 A1.25 YOSD-A1.39 1.17-1.29 A1.39 YOSD-A1.54 1.30-1.37 A1.54 YOSD-A1.63 1.38-1.47 A1.63 YOSD-A1.75 1.48-1.56 A1.75 YOSD-A1.86 1.57-1.65 A1.86 YOSD-A1.99 1.66-1.79 A1.99 YOSD-A2.15 1.80-1.95 A2.15 YOSD-A2.31 1.96-2.15 A2.31 YOSD-A2.57 2.16-2.38 A2.57 YOSD-A2.81 2.39-2.75 A2.81 YOSD-A3.61 2.76-2.84 A3.61 YOSD-A3.95 2.85-3.06 A3.95 YOSD-A4.32 3.07-3.45 A4.32 YOSD-A4.79 3.46-3.70 A4.79 YOSD-A5.30 3.71-4.07 A5.30 YOSD-A5.78 4.08-4.32 A5.78 YOSD-A6.20 4.33-4.90 A6.20 YOSD-A6.99 4.91-5.35 A6.99 YOSD-A7.65 5.36-5.85 A7.65 YOSD-A8.38 5.86-6.41 A8.38 YOSD-A9.25 6.42-6.79 A9.25 YOSD-A9.85 6.80-7.57 YOSD-A11.0 7.58-8.15 A11.0 YOSD-A11.9 8.16-8.98 A11.9 YOSD-A13.2 8.99-9.67 A13.2 YOSD-A14.1 9.68-9.95 A14.1 YOSD-A14.8 9.96-10.8 A14.8 YOSD-A16.2 10.9-12.1 A16.2 YOSD-A17.9 12.2-13.1 A17.9 YOSD-A19.8 13.2-13.9 A19.8 YOSD-A21.3 14.0-15.0 A21.3 YOSD-A25.2 15.1-16.0 A25.2 CATALOG NUMBER F E AT U R E S - S P E C I F I C AT I O N S X S D / X S X N O N - FA C T O RY S E A L E D D I M E N S I O N S BOX STYLE Single gang dead-end Single gang feed-thru HUB SIZE starter assemblies and need to be ordered as separate items by catalog number and priced accordingly. B D G 1/2" 5-1/4"(133) 2-1/4"(57) — 11/16"(17) 3/4" 5-1/4"(133) 2-1/4"(57) — 11/16"(17) 1" 5-3/8"(136) 2-3/8"(60) — 7/8"(22) 1/2" 5-1/4"(133) 2-1/4"(57) 6"(152) 11/16"(17) 3/4" 5-1/4"(133) 2-1/4"(57) 6"(152) 11/16"(17) 1" 5-3/8"(136) 2-3/8"(60) 6"(152) 7/8"(22) A9.85 1Overload heaters are not supplied as part of the A FA C T O RY S E A L E D ( F X S D / F X S X ) C55 B7MS SERIES • CONTROLS C O M PA C T M A N U A L I E C S TA R T E R S Class I, Div. 1 & 2, Groups B,C,D Class l, Zones 1 & 2, Groups llB+H2, llA Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) C Certified - File LR11714 US B7MS2R Rotary Style B7MS1P Push Button Style F E AT U R E S - S P E C I F I C AT I O N S Applications The PRISM® B7MS Series of non-reversing, manual line voltage starters and enclosures are suitable for use in applications requiring manual across-the-line starting and stopping of small single and polyphase AC motors, and where overload protection is needed. Manual starters are generally used on small machine tools, fans and blowers, pumps, compressors, and conveyors as well as many other types of electrical equipment. Features • Compact size enclosures provide application flexibility with cost savings over industry standard sizes • NEMA 4, 4X rated - providing protection from hose directed water and corrosion • Pre-drilled to facilitate easy field installation of starters • 2 operating styles, rotary or push button, including lock-out provision. • Provisions for drain and breather • Bi-directional ductile mounting lugs • Two NPT conduit openings provided as standard, with custom openings on request PRISM® enclosures universal design accommodates, as standard, IEC starter manufacturers including Square D, CutlerHammer, ABB, Siemens, Moeller, Sprecher + Schuh, Allen-Bradley, Advance Controls, and WEG. Square D © Schneider Electric Siemens © Siemens AG Moeller © Moeller Electric Corp. See catalog pg. DE8A for copyrights of other brands referenced. Catalog Logic B7MS 1 Standard Materials / Finish • Enclosures: Copper-free aluminum (less than 4/10 of 1% copper content) • Cover Bolts: 316 Stainless Steel • O-ring Gasket: Silicone • Finish: Grey Powder Polyester painted exterior, electrostatically applied When ordered with starters, ABB or Square D supplied. M O D I F I C AT I O N S SUFFIX NUMBER Electrical Rating • Starters rated 600V, 3 phase up to 50HP R S 1 DESCRIPTION KIT-251 100 amp ground lug A Auxiliary contacts 1 NO + 1 NC SU-2 Hinge-9 Installed SU3* Drain & Breather installed (NEMA 7CD) SU3B* Drain & Breather installed (NEMA 7BCD) B7SPNPT Change Std. conduit size and location SU9 Special paint finish SU14 Fungus proofing of enclosures *NOTE: The installation of a Drain & Breather will void the NEMA 4-4X rating of enclosure. A Constant for Series Enclosure Size 1 = B7EP 2 = B7EQ Operating Device R = Rotary P = Push Buttons Starter Manufacturer to be supplied S = Square D A = ABB Blank = Enclosure only Horsepower (FLA) of starter Accessories A = Aux. Contacts NO + NC DIMENSIONS Fixed Lug Position For B7MS1 Optional Position For B7MS2 Standard Lug Position For B7MS2 Enclosure OUTSIDE BOX DIMENSIONS A B C NOMINAL INSIDE BOX D E F MOUNTING DIMENSIONS G H CONDUIT SIZE I J K - - - 1-1/4 1 B7MS1 5-3/4 8-1/16 6-5/16 3-5/8 5-13/16 5-1/16 3-1/8 8-1/8 B7MS2 8-1/8 13-1/16 7-13/16 4-1/4 9-13/16 6-5/16 2-1/2 11-3/8 6-3/8 7-1/2 1-13/16 1-1/2 C C56 ENCLOSURE WITHOUT STARTER B7MS1R B7MS1R ENCLOSURE WITHOUT STARTER B7MS2RA FOR USE WITH ABB ONLY ENCLOSURE WITHOUT STARTER B7MS1P* ENCLOSURE WITHOUT STARTER B7MS2P ENCLOSURE WITHOUT STARTER B7MS1R B7MS SERIES • CONTROLS C O M PA C T M A N U A L I E C S TA R T E R S B7MS - ROTARY STYLE WITH ABB MS132 & MS450 SERIES CATALOG ADJUSTMENT SINGLE PHASE HP NUMBER RANGE FLA 120V 230V B7MS1RA-1 0.63 - 1.0 B7MS1RA-2 1.0 - 1.6 0.1 B7MS1RA-3 1.6 - 2.5 0.167 B7MS1RA-4 2.5 - 4.0 0.125 0.33 B7MS1RA-5 4.0 - 6.3 0.25 0.5 B7MS1RA-6 6.3 - 9.0 0.33 1 B7MS1RA-7 9.0 - 12.5 0.5 2 B7MS1RA-8 12.5 - 16.0 1 2.5 B7MS1RA-9 16.0 - 20.0 1.5 3 B7MS1RA-10 20.0 - 25.0 2 3 B7MS2RA-12 11 - 16 1 3 B7MS2RA-13 14 - 20 1.5 3 B7MS2RA-14 18 - 25 2 5 B7MS2RA-15 22 - 32 3 5 B7MS2RA-16 28 - 40 3 7.5 B7MS2RA-17 36 - 45 5 7.5 B7MS2RA-18 40 - 50 5 10 B7MS - PUSH BUTTON STYLE SQUARE D GV2 SERIES CATALOG ADJUSTMENT SINGLE PHASE HP NUMBER RANGE FLA 120V 230V B7MS1PS-1 0.63 - 1.0 B7MS1PS-2 1.0 - 1.6 0.1 B7MS1PS-3 1.6 - 2.5 0.167 B7MS1PS-4 2.5 - 4.0 0.125 0.33 B7MS1PS-5 4.0 - 6.3 0.25 0.5 B7MS1PS-6 6.0 - 10.0 0.5 1.5 B7MS1PS-7 9.0 - 14.0 0.75 2 B7MS1PS-8 13.0 - 18.0 1 3 B7MS1PS-9 17.0 - 23.0 1.5 3 B7MS1PS-10 20.0 - 25.0 2 3 B7MS1PS-11 24.0 - 32.0 2 5 B7MS2PS-12 10.0 - 16.0 1 2 B7MS2PS-14 16.0 - 25.0 2 3 B7MS2PS-16 25.0 - 40.0 3 7.5 B7MS2PS-18 40.0 - 63.0 5 10 B7MS - ROTARY STYLE WITH SQUARE D GV2 & GV3 SERIES CATALOG ADJUSTMENT SINGLE PHASE HP NUMBER RANGE FLA 120V 230V B7MS1RS-1 0.63 - 1.0 B7MS1RS-2 1.0 - 1.6 0.1 B7MS1RS-3 1.6 - 2.5 0.167 B7MS1RS-4 2.5 - 4.0 0.125 0.33 B7MS1RS-5 4.0 - 6.3 0.25 0.5 B7MS1RS-6 6.0 - 10.0 0.5 1.5 B7MS1RS-7 9.0 - 14.0 0.75 2 B7MS1RS-8 13.0 - 18.0 1 3 B7MS1RS-9 17.0 - 23.0 1.5 3 B7MS1RS-10 20.0 - 25.0 2 3 B7MS1RS-11 24.0 - 32.0 2 5 200V-208V 230V 5 5 7.5 10 15 15 15 0.5 1 1.5 2.5 3 5 5 7.5 5 7.5 10 10 15 15 20 200V-208V 230V 0.5 0.75 1.5 2 3 5 5 5 10 3 5 10 20 0.5 1 1.5 3 3 5 7.5 7.5 10 5 7.5 10 20 200V-208V 230V 0.5 0.75 1.5 2 3 5 5 5 10 0.5 1 1.5 3 3 5 7.5 7.5 10 ENCLOSURE WITHOUT STARTER B7MS2R B7MS1R - For use with ABB MS116, MS325, MS132 Automation Direct BM3 Cutler-Hammer XTPR Moeller PKZMO Seimens 3RV Sprecher + Schuh KTA7 SQ D Telemecanique GV2P WEG MPW25 B7MS2R - For use with Automation Direct BM3 B7MS2RA - For use with ABB MS450 B7MS1P - For use with Cutler-Hammer XTPB Moeller PKZMO1 SQ D Telemecanique GV2ME WEG MPW25 B7MS2P - For use with Advance Control MMS25 * B7MS1PRW - (enclosure without starter) For use with Allen-Bradley 140 Sorecher + Schuh KT4 THREE PHASE HP 480V 600V 0.5 0.5 0.75 0.75 1 1.5 2 3 3 5 5 7.5 7.5 10 10 10 10 15 15 20 10 15 15 20 20 25 25 30 30 40 30 40 40 50 THREE PHASE HP 480V 600V 0.5 0.5 0.75 1 1 1.5 2 3 3 5 5 7.5 10 10 10 15 15 20 15 20 20 30 10 10 15 20 25 30 40 50 THREE PHASE HP 480V 600V 0.5 0.5 0.75 1 1 1.5 2 3 3 5 5 7.5 10 10 10 15 15 20 15 20 20 30 C57 B7MS SERIES • CONTROLS C O M PA C T M A N U A L N E M A S TA R T E R S Class I, Div. 1 & 2, Groups B,C,D Class l, Zones 1 & 2, Groups llB+H2, llA Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 NEMA 3, 4, 4X, 7(B,C,D) 9(E,F,G) C B7MSN2P US Certified - File LR11714 INTERNAL VIEW F E AT U R E S - S P E C I F I C AT I O N S Applications PRISM® The B7MSN Series of nonreversing, manual line voltage starters and enclosures are suitable for use in applications requiring manual across-theline starting and stopping of small single and polyphase AC motors, and where overload protection is needed. Manual starters are generally used on small machine tools, fans and blowers, pumps, compressors, and conveyors as well as many other types of electrical equipment. PRISM® enclosures universal design accommodates, as standard, starter manufacturers including • Allen-Bradley 609 Series • Cutler-Hammer B100M Series • GE CR106 Series • Square D 2510M Series CATALOG NUMBER ENCLOSURE W/CUTLER-HAMMER W/SQUARE D B7MSN2P B7MSN2PC0C B7MSN2PC1C ** = INCLUDES 380VAC Enclosure B7MSN2P • Compact size enclosures provide application flexibility with cost savings over industry standard sizes • NEMA 4, 4X rated - providing protection from hose directed water and corrosion • Pre-drilled to facilitate easy field installation of starters • Large double green/red start-stop push buttons • Can be pad locked in “OFF” position • Provisions for drain and breather • Bi-directional ductile mounting lugs • Two 1-1/2” NPT conduit openings provided as standard, with custom open ings on request • Enclosures: Copper-free aluminum (less than 4/10 of 1% copper content) • Cover Bolts: 316 Stainless Steel • O-ring Gasket: Silicone • Finish: Grey Powder Polyester painted exterior, electrostatically applied SIZE/PHASE B7MSN2PS0B B7MSN2PS1B B7MSN2PSDB B7MSN2PS0C B7MSN2PS1C B7MSN2PS0V B7MSN2PS1V SINGLE PHASE HP 120VAC 230VAC M-0 2P M-1 2P M-1P 2P M-0 3P M-1 3P M-0 2P VDC M-1 2P VDC 1 2 3 B C E F DESCRIPTION KIT-251 AO AC 100 amp ground lug Aux. contact NO only Aux. contact NC only SU-2 Hinge-9 Installed SU3* Drain & Breather installed (NEMA 7CD) SU3B* Drain & Breather installed (NEMA 7BCD) B7SPNPT Change Std. conduit size and location SU9 Special paint finish SU14 Fungus proofing of enclosures *NOTE: The installation of a Drain & Breather will void the NEMA 4-4X rating of enclosure. THREE PHASE DC HP 208VAC 230VAC 480VAC** 600VAC 115DC 230VDC 3 7.5 3 7.5 5 10 MOUNTING DIMENSIONS G H I J Standard Lug Position For B7MSN2P K 8-1/8 13-1/16 7-13/16 4-1/4 9-13/16 6-5/16 2-1/2 11-3/8 6-3/8 7-1/2 1-13/16 1 CH 1.5 CH 1.5 CH 2 CH 1 1.5 1.5 2 5 10 Optional Position NOMINAL INSIDE BOX D M O D I F I C AT I O N S SUFFIX NUMBER 2 3 5 CH = CUTLER-HAMMER ONLY OUTSIDE BOX DIMENSIONS A Standard Materials /Finish Electrical Rating NEMA starter sizes 0, 1, 1-1/2 FVNR; 2 pole single phase = 230 VAC 3 pole three phase = 600 VAC 2 pole VDC = 230 VDC Overload Heaters Heaters are not included, see next page. Allen Bradley © Rockwell Automation Cutler-Hammer © Eaton Corporation GE © General Electric Company Square D © Schneider Electric B7MSN2PC0B B7MSN2PC1B Features C C58 B7MSN SERIES • CONTROLS H E AT E R S , C ATA L O G L O G I C , D I M E N S I O N S B7MSN Heater Selection1 Square D 2510M Only Motor Full Load AMPS @ 40oC Size 0 Catalog Logic CATALOG NUMBER SINGLE PHASE THREE PHASE KB044 KB051 KB057 KB063 KB071 KB081 KB092 KB103 KB116 KB130 KB145 KB167 KB188 KB210 KB240 KB265 KB300 KB330 KB370 KB415 KB485 KB550 KB625 KB690 KB770 KB820 KB910 KB102 KB115 KB128 KB014 KB155 KB175 KB195 KB022 KB025 0.33 - 0.36 0.37 - 0.40 0.41 - 0.45 0.46 - 0.52 0.53 - 0.59 0.60 - 0.66 0.67 - 0.73 0.74 - 0.81 0.82 - 0.91 0.92 - 1.02 1.03 - 1.14 1.15 - 1.29 1.20 - 1.42 1.43 - 1.64 1.65 - 1.80 1.81 - 2.10 2.11 - 2.30 2.31 - 2.61 2.62 - 2.99 3.00 - 3.37 3.38 - 3.94 3.95 - 4.24 4.25 - 4.54 4.55 - 5.29 5.30 - 5.73 5.74 - 6.35 6.36 - 7.08 7.09 - 7.83 7.84 - 8.47 8.48 - 9.83 9.84 - 10.5 10.6 - 11.4 11.5 - 12.8 12.9 - 13.9 14.0 - 16.1 16.2 - 18.0 0.29 - 0.32 0.33 - 0.36 0.37 - 0.39 0.40 - 0.47 0.48 - 0.56 0.57 - 0.63 0.64 - 0.69 0.70 - 0.77 0.78 - 0.86 0.87 - 0.96 0.97 - 1.11 1.12 - 1.23 1.24 - 1.37 1.38 - 1.55 1.56 - 1.75 1.76 - 1.92 1.93 - 2.16 2.17 - 2.50 2.51 - 2.81 2.82 - 3.16 3.17 - 3.40 3.41 - 3.76 3.77 - 4.00 4.01 - 4.68 4.69 - 5.18 5.19 - 5.51 5.52 - 6.19 6.20 - 7.12 7.13 - 8.15 8.16 - 8.60 8.61 - 9.21 9.22 - 10.1 10.2 - 11.2 11.3 - 12.0 --------- SIZE 1 & 1P SIZE 1 & 1P SIZE 1 & 1P KB195 KB022 KB025 KB280 KB032 KB036 KB040 KB045 --------16.2 - 17.6 17.7 - 20.6 20.7 - 23.1 23.2 - 26.0 --------- 11.3 - 12.1 12.2 - 13.6 13.7 - 15.3 15.4 - 17.3 17.4 - 19.1 19.2 - 21.7 21.8 - 24.2 24.3 - 26.0 SIZE 1P SIZE 1P SIZE 1P KB036 KB040 KB045 KB050 23.2 - 27.1 27.2 - 29.2 29.3 - 33.0 33.1 - 36.0 ----------------- 1 Select heater element based on motor nameplate listed full load amps. Trip rating of element is 125% of motor minimum F.L.A. listed for the element B7MSN 2 P C Constant for Series Enclosure Size 2 = B7EQ Operating Device P = Push Buttons Starter Manufacturer C = Cutler-Hammer S = Square D Blank = Enclosure only NEMA Size O = Size Ø 1 = Size 1 D = Size 1-1/2 Number of Poles B = 2 Pole 1 Ø (Cutler-Hammer, Sq.D only) C = 3 Pole 3 Ø V = 2 Pole DC Accessories AO = NO Aux. Contact AC = NC Aux. Contact 1 B7MSN Heater Selections CUTLER-HAMMER B A C59 XMSW SERIES • CONTROLS M A N U A L L I N E S TA R T E R S C U T L E R H A M ME R / E AT O N B 1 0 0 S TA RT E R S F U L L V O LTA GE , N O N -R E V E R S I N G SI N G L E A N D P O LY P H A S E Applications XMSW Series, non-reversing, manual line voltage starters and enclosures are suitable for use in applications requiring manual across-the-line starting and stopping of small single and polyphase AC motors, and where overload protection is needed. Manual starters are generally used on small machine tools, fans and blowers, pumps, compressors, and conveyors as well as many other types of electrical machinery. Class I, Div. 1 & 2, Groups C,D Class l, Zones 1 & 2, Groups llB, llA Class II, Div. 1 & 2, Groups E,F,G Class Ill NEMA 3R, 7(C,D) 9(E,F,G) Listed - File E12379 See files for details or call Killark. F E AT U R E S - S P E C I F I C AT I O N S Features • Rectangular bolted cover design provides for attractive, compact, uniform installations • Enclosure and external handle are diecast copper-free (less than 0.4%) aluminum alloy • Cast “ON,” “OFF,” “TRIPPED” markings on cover align with external handle and provide clear indication of enclosed starter condition • External handle is a vault type with standard provisions for locking in the ”OFF” position with up to three pad-locks. Provision for locking in “ON” position is available as factory modification (add suffix SU-40 to catalog number). • Two cast 1" NPT conduit hubs with integral pipe stop, one top and one bottom, are standard on all assemblies Electrical Rating Starter sizes 0, 1, 11/2 Two pole, single phase; three pole, polyphase Maximum 10 HP, 600 Volts AC Dimensions 1 Select heater element based on motor nameplate listed. Full-load amps. Trip rating of element is125% of motor minimum F.L.A. listed for the element. X M S W M A N U A L L I N E S TA R T E R S 1 2 0 2-POLE; 1Ø, A C 1 2 — CATALOG NUMBER WITH ENCLOSURE STARTER ONLY X M S W- 0 B T 0 3-POLE; 3Ø, A C 2 3 5 X M S W- 0 C T 1 2-POLE; 1Ø, A C 2 3 — X M S W- 1 B T 1 3-POLE; 3Ø, A C 3 7-1/2 10 X M S W- 1 C T 1-1/2 2-POLE; 1Ø, A C 3 5 — X M S W- D B T NEMA SIZE MAXIMUM HORSEPOWER NUMBER OF POLE SIZE 120 VAC 208-240 VAC 480-600 VAC X M S W- 0 0 T 1 Heaters not included. If heaters are required order as separate item by catalog number, three phase starters require three heaters. Single phase starters require two heaters. 2 Three pole starters may be used on two-phase four-wire circuits by running one wire direct to motor. H E AT E R TA B L E F O R X M S W S E R I E S M A N U A L L I N E S TA R T E R S 1 CATALOG NUMBER YOWEA200-FH03 YOWEA200-FH04 YOWEA200-FH05 YOWEA200-FH06 YOWEA200-FH07 YOWEA200-FH08 YOWEA200-FH09 YOWEA200-FH10 YOWEA200-FH11 YOWEA200-FH12 YOWEA200-FH13 YOWEA200-FH14 YOWEA200-FH15 YOWEA200-FH16 YOWEA200-FH17 YOWEA200-FH18 YOWEA200-FH19 YOWEA200-FH20 YOWEA200-FH21 YOWEA200-FH22 YOWEA200-FH23 YOWEA200-FH24 YOWEA200-FH25 YOWEA200-FH26 YOWEA200-FH27 YOWEA200-FH28 YOWEA200-FH29 MOTOR FULL-LOAD AMPS @ 40OC SINGLE THREE PHASE PHASE .28-.29 .30-.33 .34-.36 .37-.40 .41-.45 .46-.50 .51-.56 .57-.63 .64-.70 .71-.78 .79-.86 .87-.95 .96-1.04 1.05-1.14 1.15-1.25 1.26-1.39 1.40-1.54 1.55-1.71 1.72-1.89 1.90-2.10 2.11-2.32 2.33-2.54 2.55-2.79 2.80-3.07 3.08-3.36 3.37-3.68 3.69-4.03 .25-.26 .27-.29 .30 .32 .33-.35 .36-.39.40-.44 .45-.49 .50-.55 .56-.61 .62-.68 .69-.75 .76-.83 .84-.91 .92-1.00 1.01-1.10 1.11-1.22 1.23-1.35 1.36-1.50 1.51-1.66 1.67-1.84 1.85-2.03 2.04-2.23 2.24-2.45 2.46-2.69 2.70-2.95 2.96-3.23 3.24-3.53 CUTLER HAMMER FH03 FH04 FH05 FH07 FH07 FH08 FH09 FH10 FH11 FH12 FH13 FH14 FH15 FH16 FH17 FH18 FH19 FH20 FH21 FH22 FH23 FH24 FH25 FH26 FH27 FH28 FH29 CATALOG NUMBER YOWEA200-FH30 YOWEA200-FH31 YOWEA200-FH32 YOWEA200-FH33 YOWEA200-FH34 YOWEA200-FH35 YOWEA200-FH36 YOWEA200-FH37 YOWEA200-FH38 YOWEA200-FH39 YOWEA200-FH40 YOWEA200-FH41 YOWEA200-FH42 YOWEA200-FH43 YOWEA200-FH44 YOWEA200-FH45 YOWEA200-FH46 YOWEA200-FH47 YOWEA200-FH48 YOWEA200-FH49 YOWEA200-FH50 YOWEA200-FH51 YOWEA200-FH52 YOWEA200-FH53 YOWEA200-FH54 YOWEA200-FH55 YOWEA200-FH56 YOWEA200-FH57 MOTOR FULL-LOAD AMPS @ 40OC SINGLE THREE PHASE PHASE 4.04-4.40 4.41-4.81 4.82 -5.26 5.27-5.74 5.75-6.25 6.27-6.83 6.84-7.45 7.46-8.11 8.12 -8.81 8.82-9.58 9.59-10.40 10.41-11.3 11.4-12.2 12.3-13.5 13.6-14.9 15.0-16.0 16.1-17.1 17.2-18.3 18.4-19.7 19.8-21.2 21.3-22.8 22.9-24.5 24.6-26.4 26.5-28.5 28.6-30.8 30.9-33.3 33.4-36.0 36.1-38.9 3.54-3.86 3.87-4.22 4.23 -4.61 4.62-5.03 5.04-5.49 5.50-5.99 6.00-6.53 6.54-7.11 7.12 -7.73 7.74-8.40 8.41-9.12 9.13-9.89 9.9-10.7 10.8-11.8 11.9-13.0 13.1-14.0 14.1-15.0 15.1-16.1 16.2-17.3 17.4-18.6 18.7-20.0 20.1-21.5 21.6-23.2 23.2-25.0 25.1-26.8 — — — — — — CUTLER HAMMER FH30 FH31 FH32 FH33 FH34 FH35 FH36 FH37 FH38 FH39 FH40 FH41 FH42 FH43 FH44 FH45 FH46 FH47 FH48 FH49 FH50 FH51 FH52 FH53 FH54 FH55 FH56 FH57 C
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 59 Page Layout : SinglePage Page Mode : UseNone XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Keywords : Producer : PDF Technologies, Inc http://www.pdf-technologies.com Creator Tool : PDFTechLib 1.7.36.0 by PDF Technologies, Inc. Create Date : 2014:08:27 12:47:23-04:00 Metadata Date : 2014:08:27 12:47:23-04:00 Modify Date : 2014:08:27 12:47:23-04:00 Format : application/pdf Creator : Title : Description : Author : Subject :EXIF Metadata provided by EXIF.tools