8998CT9701

2014-09-27

• Product Description
  • Introduction
    • Features
  • Codes and Standards
  • Certification
  • NEMA/EEMAC Wiring Classes and Enclosure Types
    • Wiring Classes
      • Class 1—Independent Units
      • Class 2—Interconnected Units
      • Type A
      • Type B
      • Type B-D
      • Type B-T
      • Type C
    • Enclosure Types
      • Type 1
      • Type 1A (Gasketed)
      • Type 3R
      • Type 12
  • Shipping Weights
  • Altitude Ratings
  • Motor Control Center Heat Dissipation
  • Structure Steel Gauge Information
• Application and General Information
  • Structures and Bussing
    • Structure
    • Bussing Options and Modifications
    • Structure Options and Modifications
    • Special Structures
    • Model 6 to Model 5 Transition Section
    • Switchboard to Model 6 Transition Section
    • Bus Duct Connection
    • Model 4 to Model 6 Transition Section
  • Incoming Devices
    • Main Lug Compartments
    • Main Circuit Breakers
    • Optional Masterpact Power Circuit Breaker Main Units—Stored Energy/Drawout Style/Insulated Case
    • MCC Masterpact Main Accessory Groups
    • Tie Breakers
    • Main Fusible Switches
    • Standard Wire Lug Ranges (Mechanical)
    • 3-Phase, 4-Wire Systems
    • PowerLogic® Circuit Monitor
    • PowerLogic Power Meter
    • Transient Voltage Surge Suppressor (TVSS) Units for MCC Incoming Mains
    • Model IMA TVSS (120 kA Surge Rating)
    • Model IMA TVSS (160kA Surge Rating)
    • Model IMA TVSS (240 kA Surge Rating)
    • Additional Options
  • Branch Feeder Units
    • Circuit Breaker Branch Feeder Units
    • Fusible Switch Branch Feeder Units
  • Combination Starter Units
    • Full Voltage Non-Reversing (FVNR) Starters with Circuit Breakers
    • Full Voltage Non-Reversing Vacuum Starters with Circuit Breakers
    • Application-Rated Compac 6 Starters—Full Voltage Non-Reversing with Circuit Breakers
    • Full Voltage Reversing (FVR) Starters with Circuit Breakers
    • Full Voltage Reversing Vacuum Starters with Circuit Breakers
    • Application-Rated Compac 6 Starters—Full Voltage Reversing with Circuit Breakers
    • Reduced Voltage Autotransformer (RVAT) Starters with Circuit Breakers
    • Reduced Voltage Autotransformer (RVAT) Vacuum Starters with Circuit Breakers
    • Full Voltage 2-Step Part-Winding (FVPW) Starters with Circuit Breakers
    • Full Voltage 2-Speed 1-Winding Starters (Consequent Pole) with Circuit Breakers
    • Full Voltage 2-Speed 2-Winding Starters (Separate Winding) with Circuit Breakers
    • Full Voltage 2-Speed Reversing Starters with Circuit Breakers
    • Wye-Delta Closed Transition Starters with Circuit Breakers (Non-UL Listed)
    • Wye-Delta Open Transition Starters with Circuit Breakers (Non-UL Listed)
    • Full Voltage Non-Reversing (FVNR) Starters with Fusible Switch Disconnects
    • Full Voltage Non-Reversing Vacuum Starters with Fusible Switch Disconnects
    • Application-Rated Compac 6 Starters—Full Voltage Non-Reversing with Fusible Disconnects
    • Full Voltage Reversing (FVR) Starters with Fusible Switch Disconnects
    • Full Voltage Reversing Vacuum Starters with Fusible Switch Disconnects
    • Application-Rated Compac 6 Starters—Full Voltage Reversing with Fusible Disconnects
    • Reduced Voltage Autotransformer (RVAT) Starters with Fusible Switch Disconnects
    • Reduced Voltage Autotransformer Vacuum Starters with Fusible Switch Disconnects
    • Full Voltage 2-Step Part-Winding (FVPW) Starters with Fusible Switch Disconnects
    • Full Voltage 2-Speed, 1-Winding Starters (Consequent Pole) with Fusible Switch Disconnects
    • Full Voltage 2-Speed, 2-Winding Starters (Separate Winding) with Fusible Switch Disconnects
    • Full Voltage 2-Speed Reversing Starters with Fusible Switch Disconnects
    • Wye-Delta Closed Transition Starters with Fusible Switch Disconnects (Non-UL Listed)
    • Wye-Delta Open Transition Starters with Fusible Switch Disconnects (Non-UL Listed)
  • Altivar® 61 and 71 AC Drives
    • MCC Package Features
    • Factory Options:
  • Altivar AC Drive Features
    • Options
  • Combination Altistart® 48 Soft Start Units
  • Selection
    • Standard Duty Applications
    • Severe Duty Applications
  • Features
    • Shorting Contactor
    • Torque Control System (TCS)
    • Starting and Stopping
    • Protective Features
    • Monitoring and Indication
    • NEMA/EEMAC Type 3R Enclosure Applications for AC Drives and Soft Starts
    • Environmental Control
    • Ratings
  • Unit Options
    • Options And Modifications
    • Pilot Devices
    • Pilot Lights
    • Overload Relays
    • TeSys® T Motor Management Controller
    • Motor Logic® Solid-State Overload Relays
    • Motor Logic Plus Solid State Overload Relays
  • AccuSine® Power Correction System
    • General Information
    • Accusine PCS Sizing
    • Single-Phase Distribution Transformers 120/240V Secondary
    • Three-Phase Distribution Transformers 208Y/120 V Secondary
    • Distribution Panelboards
    • Factory Installed Panelboard Branch Circuit Breakers
    • Empty Mounting Units
    • Full Section Empty Mounting Units (Relay Section)
    • Unwired Master Terminal Compartment
    • Blank Doors
    • Power Factor Correction Capacitors
    • Selection
    • Capacitor Sizing Table—480 V
    • PowerLogic® Ethernet Gateways
    • Transparent Ready® Equipment Configurations
    • Gateway Ethernet Switches
    • High Resistance Ground Unit
  • ASCO 7000 Series Automatic Transfer Switches With Microprocessor Control Panel (Non-UL Listed)
  • Model 6 iMCCs
    • Common Mounting Configurations for Automation Components
    • iMCC-Network Cabling
    • Ethernet Switches
  • Repeaters/Bridges/Gateways
• Technical Overview
  • Short Circuit Current Ratings
    • Bus Bracing or Withstand Rating
    • Integrated Equipment Rating
    • Interrupt Rating
    • Series Connected Short Circuit Current Ratings
    • Short Circuit Current Rating
    • UL Listed Short Circuit Current Ratings
    • “Self-Certified” Short Circuit Current Ratings
• Selection Guide
  • Layout Instructions
  • Unit Designation Chart for Planning
• Dimensions
  • General
    • NEMA/EEMAC Type 1, Type 1A (Gasketed), or Type 12 Enclosures
    • NEMA/EEMAC Type 3R Non-Walk-In Basic Enclosures
    • Bottom Conduit Entry
    • Top Conduit Entry
• Typical Specifications
  • Part 1 General
    • 1.01 Description
    • 1.02 Submittals
    • 1.03 Regulatory Requirements
    • 1.04 Packing/Shipping
    • 1.05 Storage
    • 1.06 Warranty
  • Part 2 Product
    • 2.01 Manufacturers
    • 2.02 Materials
    • 2.03 MCC Finish
    • 2.04 Structures
    • 2.05 Wireways
    • 2.06 Barriers
    • 2.07 Bussing
    • 2.08 Typical Unit Construction
    • 2.09 Components for Typical Units
    • 2.10 Six-Inch Unit Construction
    • 2.11 Components for Six-Inch Units
    • 2.12 Adjustable Frequency AC Drive Unit Construction
    • 2.13 Solid-State Reduced-Voltage Starter Unit Construction
    • 2.14 General Communication Cabling
    • 2.15 Modbus® Communication Cabling
    • 2.16 Ethernet (Modbus TCP) Communication Cabling
    • 2.17 DeviceNet™ Communication Cabling
    • 2.18 CANopen Communication Cabling
    • 2.19 PROFIBUS DP Communication Cabling
    • 2.20 Quality Control
  • Part 3 Execution
    • 3.01 Location