120084 Catalog
2014-09-04
: Pdf 120084-Catalog 120084-Catalog 045686 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 14
| Download | |
| Open PDF In Browser | View PDF |
ACCESSORIES & TOOLS Splicing Accessories HV-BRAID Ground Braid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HVS-MESH Shielding Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . JGK-MS Jacketed Cable Ground Kits (5-35 kV) . . . . . . . . . . . Cable Preparation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HVS-GC Grounding Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . HVS-LR Lead Sheath Repair Kits . . . . . . . . . . . . . . . . . . . . . . . 262 262 262 263 263 264 Termination Accessories BRKT-SS Cable Mounting Brackets . . . . . . . . . . . . . . . . . . . . . 265 EAKT-1520 Mounting Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 MOD-S Skirts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Conduit/Cable Sealing RDSS Sealing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Blank Duct Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Torches & Heat Guns Torches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Torch Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Torch Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heat Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 270 270 271 Tools Splicing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wire Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Vise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stripping Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RAYCHEM cable accessories ALR photocontrols AMP connectors 261 272 272 272 273 273 274 274 261 Splicing Accessories HV-BRAID Ground Braid Raychem HV-Braid is tinned copper braid, solder-blocked for use with HVS and HVT kits. C_HV_Braid Selection Information: dimensions in inches (millimeters) Braid Size Length of Catalog Number (AWG) Moisture-Blocked Braid HV-BRAID-8-1520 #8 60 (1524) HV-BRAID-6-1520 #6 60 (1524) HV-BRAID-4-1520 #4 60 (1524) Std. Pack (pcs/box) 3 3 3 Ordering Information Order shielding mesh based on braid size. HVS-MESH Shielding Mesh Raychem HVS-MESH is used in conjunction with high-voltage ground braids to provide shield continuity when splicing shielded power cables. C_HVS_Mesh Selection Information: dimensions inches/feet (milimeters/meters) Std. Pack Catalog Number Width Length (Rolls/Box) HVS-MESH-2-5000 2 (51) 16 (4.8) 4 ACCESSORIES & TOOLS Ordering Information 1. Order shielding mesh based on cable diameter and length of cable to be covered. 2. To apply shielding mesh, half-lap around cable. 262 JGK-MS The Raychem JGK-MS kit addresses the RUS recommendation to externally ground the jacketed cable neutrals at least four times per mile to limit shield standing voltage, to avoid accidental shock, and to provide multiple parallel return paths for line-to-ground faults. C_JGK_MS • H eat-shrinkable JGK-MS kits provide complete environmental sealing with a wraparound, adhesive-lined rejacketing sleeve. • Each kit contains a constant-force ground clamp, a solder-blocked ground braid for external grounding, and a sealant to encapsulate and seal the ground connector. • Kits are RUS accepted and have been tested to meet the 10 kA/10 cycles or 15 kA/15 cycle fault current test requirements. • Wraparound rejacketing sleeve has been water-seal tested to the applicable sections of ANSI C 119.1. Selection Information: dimensions in inches (millimeters) Nominal Use Range (AWG/kcmil) Catalog Number 15 kV JGK-MS-1 #4-4/0 JGK-MS-2 250-1000 JGK-MS-3 1000-2000 25 kV #1-1/0 1/0-750 750-1750 35 kV 1/0-500 500-1500 Fault Current 10 kA, 10 cycles 15 kA, 15 cycles 15 kA, 15 cycles Ordering Information 1. Standard package: 3 kits/box 2. Related test report: EDR-5242 RAYCHEM cable accessories ALR photocontrols AMP connectors 262 Splicing Accessories Cable Preparation Kit P63 • Raychem P63 cable preparation kits can be used with all TE Connectivity cable accessories • Use P63 kits to clean and abrade cable insulation Selection Information C_P63 Catalog Number Std. Pack (kits/box) P63 12 Ordering Information 1. One kit contains six solvent wipes, six dry wipes and three strips of abrasive paper. 2. For splices, the number of prep kits vary depending upon size of cable and type of splice. For terminations, one prep kit will clean three phases (one 3/C termination or three 1/C terminations). 3. Solvent wipes contain PT Technologies type PF cleaner. HVS-GC Grounding Clamps Raychem HVS-GC are used for securing ground brades when splicing or terminating power cables. Selection Information: dimensions in inches (millimeters) C_HVS_SG Catalog Number HVS-GC-0.5 HVS-GC-1.0 HVS-GC-1.5 EPPA-034-A EPPA-034-E EPPA-034-F EPPA-034-G EPPA-034-H EPPA-034-L Use Range 0.5-1.0 (13-25) 1.0-2.0 (25-51) 1.5-3.0 (38-76) 0.5-0.8 (12-20) 0.7-1.1 (17-29) 1.2-1.5 (30-39) 1.6-2.4 (40-60) 2.0-3.0 (50-75) 2.3-3.3 (57-85) Std. Pack (Pcs./Box) 100 100 50 RAYCHEM cable accessories ALR photocontrols AMP connectors ACCESSORIES & TOOLS Ordering Information 1. Order ground clamps based on cable diameter. 2. Confirm size with use range. 263 263 Splicing Accessories HVS-LR The Raychem HVS-LR series kit offers a simple method of repairing lead sheath damage on paperinsulated, lead-covered (PILC) cables. • C ombines the strength and durability of TE Connectivity’s Raychem MBSM wraparound sleeve with an effective oil-resistant sealing mastic. • Tested to and meet the following load-cycling and pressure test requirements indicated in the chart below C_HVS_LR Product Performance Test Current cycling at 110°C conductor temperature for 90 cycles (5 hours on, 3 hours off) Applied pressure Maximum continuous conductor temperature Result Pass 15 psi 110°C Selection Information: dimensions in inches (millimeters) Application use Catalog Number Nominal Sleeve Length Range (Min.–Max.) HVS-LR-75/15-600 24 (600) 0.65-2.65 (17-67) HVS-LR-75/15-1200 48 (1200) 0.65-2.65 (17-67) HVS-LR-160/42-600 24 (600) 1.80-5.70 (46-144) HVS-LR-160/42-1200 48 (1200) 1.80-5.70 (46-144) HVS-LR-200/50-600 24 (600) 2.15-7.10 (55-180) HVS-LR-200/50-1200 48 (1200) 2.15-7.10 (55-180) ACCESSORIES & TOOLS Ordering Information 1. B e sure to look at both the cable jacket diameter and the lead sheath diameter when selecting the HVS-LR kit. 2. Standard package: 3 kits/box 3. Related test report: EDR-5243 264 RAYCHEM cable accessories ALR photocontrols AMP connectors 264 Termination Accessories BRKT-SS Cable Mounting Brackets Raychem BRKT-SS cable mounting brackets are versatile and may be used outdoors. The brackets are constructed of s tainless steel and include all hardware. • Suitable for use on all types of cables • For use with terminations or other applications where cable mounts are needed • Includes a mounting bracket and rubber pad C_BRKT_SS Selection Information: dimensions in inches (millimeters) Catalog Number BRKT-1-SS BRKT-2-SS BRKT-3-SS BRKT-4-SS Cable Range O.D. Range 0.80-1.25 (20-32) 1.10-1.50 (28-38) 1.45-1.95 (37-50) 1.80-2.40 (46-61) Rubber pad 2" .5" bolt hole Ordering Information 1. Standard package: 1 bracket/box 2. Order brackets based on cable diameter, confirm size with use range. 3. Related test report: NCTR-99-065 Mounting bracket EAKT-1520 Mounting Kits TE Connectivity Raychem offers a mounting bracket and support insulators for poletop mounting of TE high voltage terminations. The EAKT-1520 series mounting kits provide a galvanized steel bracket, three insulators for mounting outdoor terminations, and installation instructions. The bracket is dip galvanized to meet outdoor requirements (BS 729). The insulators are lightweight and shatterproof. They combine a strong and flexible polymeric core with TE’s proven high-voltage, nontracking material. C_EAKT-1520 B P A L Selection Information: dimensions in inches (millimeters) Front Voltage Min. Mechanical Torque Catalog Class Insulator Dimensions No. of Creepage Capabilities M12 Number (kV) P L A B Skirts Length Cantilever (ft. lb) EAKT 1521 15 12.5 (310) 7.6 (195) 2.6 (65) 1.4 (35) 5 15.4 (390) 184 37 EAKT 1523 25 17.0 (430) 12.0 (305) 2.6 (65) 1.4 (35) 9 26.0 (660) 184 37 EAKT 1524 35 22.0 (560) 15.0 (380) 2.6 (65) 1.4 (35) 11 43.3 (1100) 516 37 Ordering Information 1. Standard package: 1 kit/box. 2. Related test reports: UVR-8150, UVR-8166 RAYCHEM cable accessories ALR photocontrols AMP connectors 265 ACCESSORIES&&TOOLS TOOLS ACCESSORIES • Used with TE’s Raychem high-voltage outdoor termination kits (15–35 kV). • Includes a galvanized steel T-bracket, three insulators for poletop mounting, and installation instructions. 265 Termination Accessories MOD-S Skirts MOD-S Skirts are used with TE’s Raychem high voltage termination kits for outdoor applications. C_MOD_S_Skirts Selection Information: dimensions in inches (millimeters) Cable Insulation Diameter Catalog Number (Min.–Max.) MOD-S1-314-Skirts 0.35-0.55 (9-14) MOD-S2-325-Skirts 0.60-1.25 (15-32) MOD-S3-336-Skirts 0.85-1.75 (22-44) MOD-S4-346-Skirts 1.15-2.45 (29-62) MOD-S5-357-Skirts 2.00-3.30 (50-84) Std. Pack (Skirts/Box) 6 6 6 6 6 Ordering Information 1. TE outdoor termination kits (-S) include appropriate number of skirts for the particular voltage. 2. See the table below for the number of skirts needed at each voltage. HVT Number of Skirts 1 2 3 4 HVT-Z Number of Skirts 0 1 4 4 ACCESSORIES & TOOLS Voltage 5-8 kV 15 kV 25 kV 35 kV 266 RAYCHEM cable accessories ALR photocontrols AMP connectors 266 Conduit & Cable Sealing RDSS Sealing System Duct Sealing System TE’S Raychem RDSS duct sealing system has been designed for use in conjunction with plastic, concrete, or steel ducts to provide a watertight duct seal. The RDSS duct sealing system seals cable ducts and helps to prevent flooding in cable vaults, access manholes, substation basements, and customer feeds. It can be installed while the water is flowing—see photograph. C_RDSS Provides Watertight Seal The RDSS sealing system consists of an inflatable, sealed bladder of flexible, metallic laminate material, which has pre-installed, high-temperature sealant strips on both sides. The bladder is first inflated to 45 psi (three-bar) internal pressure, and then presses the sealant against the duct wall and onto the substrate. The bag uses a self-sealing gel material to seal the filling hole when the filling tube is removed. Seals Multiple Cable Ducts For applications with three or more cables, an RDSS-CLIP is inserted between the cables. The RDSS-CLIP is a high-temperature mastic mounted on an installation stick. It seals the area between the cables when used in conjunction with the RDSS inflatable bladder. Acceptable to use on medium voltage cables including unjacketed concentric neutral. Selection Information: dimensions in inches (millimeters) †See Ordering information. Ordering Information 1. In ducts where the cable/cable bundle is less than 2.4” (60mm) in diameter, an RDSS-AT/AP-150 device must be used in conjunction with the RDSS-150. 2. Standard package: RDSS = 10 kits/box or 3 kits/box RDSS-CLIP = 5 clips/box RDSS-TOOLS = 1 each/box, CO2 cartridges = 10 each/box, RDSS-AT/AP-150 = 1 each/box 3. Related test report: EDR-5253 4. S-1278 sealant, used in RDSS-CLIPS, is available separately. 5. For proper inflation do not exceed the maximum cable bundle diameter (MCBD). To determine MCBD, use a diameter tape or contact your TE representative for assistance. RDSS Sealing Clip RDSS duct sealing clips are to be used if the duct is occupied by more than two cables. The maximum number of cables sealed with one RDSS-CLIP is four. If more cables are to be sealed, one extra clip is needed for every three additional cables. Check with your TE representative for applications with more than seven cables. Catalog Number Kit Used With RDSS-CLIP-45 RDSS-45 RDSS-CLIP-75 RDSS-75 and RDSS-60 RDSS-CLIP-100 RDSS-100 RDSS-CLIP-125 RDSS-125 RDSS-CLIP-150 RDSS-150 RAYCHEM cable accessories ALR photocontrols AMP connectors 267 ACCESSORIES & TOOLS Duct Inner Number of Cables in Duct / Maximum Cable Bundle Diameter Diameter 0, 1, or 2 Cables 3 or 4 Cables 5, 6, or 7 Cables 1.25 (32) RDSS-45 0.5 (13) RDSS-45, 1 RDSS-CLIP-45 0.3 (8) RDSS-45, 2 RDSS-CLIP-45 0.1 (3 ) 1.50 (38) RDSS-45 1.0 (25) RDSS-45, 1 RDSS-CLIP-45 0.8 (20) RDSS-45, 2 RDSS-CLIP-45 0.6 (15) 1.75 (45) RDSS-45 1.3 (32) RDSS-45, 1 RDSS-CLIP-45 1.05 (27) RDSS-45, 2 RDSS-CLIP-45 0.9 (22) 2.00 (50) RDSS-60 1.2 (30) RDSS-60, 1 RDSS-CLIP-75 1.0 (25) RDSS-60, 2 RDSS-CLIP-75 0.8 (20) 2.25 (57) RDSS-60 1.6 (41) RDSS-75, 1 RDSS-CLIP-75 1.4 (36) RDSS-75, 2 RDSS-CLIP-75 1.2 (31) 2.50 (64) RDSS-75 1.5 (38) RDSS-75, 1 RDSS-CLIP-75 1.3 (33) RDSS-75, 2 RDSS-CLIP-75 1.1 (28) 2.75 (70) RDSS-75 1.8 (46) RDSS-75, 1 RDSS-CLIP-75 1.6 (41) RDSS-75, 2 RDSS-CLIP-75 1.4 (36) 3.00 (75) RDSS-75 2.2 (56) RDSS-75, 1 RDSS-CLIP-75 2.0 (50) RDSS-75, 2 RDSS-CLIP-75 1.8 (46) 3.25 (83) RDSS-100 2.2 (56) RDSS-100, 1 RDSS-CLIP-100 2.0 (50) RDSS-100, 2 RDSS-CLIP-100 1.8 (46) 3.50 (89) RDSS-100 2.6 (66) RDSS-100, 1 RDSS-CLIP-100 2.4 (61) RDSS-100, 2 RDSS-CLIP-100 2.2 (56) 3.75 (95) RDSS-100 2.9 (74) RDSS-100, 1 RDSS-CLIP-100 2.7 (69) RDSS-100, 2 RDSS-CLIP-100 2.5 (64) 4.00 (100) RDSS-100 3.2 (80) RDSS-100, 1 RDSS-CLIP-100 3.0 (75) RDSS-100, 2 RDSS-CLIP-100 2.8 (70) 4.25 (108) RDSS-100 3.5 (89) RDSS-100, 1 RDSS-CLIP-100 3.3 (85) RDSS-100, 2 RDSS-CLIP-100 3.1 (79) 4.50 (114) RDSS-100 3.5 (89) RDSS-100, 1 RDSS-CLIP-100 3.3 (85) RDSS-100, 2 RDSS-CLIP-100 3.1 (79) 4.75 (121) RDSS-125 3.8 (97) RDSS-125, 1 RDSS-CLIP-125 3.6 (92) RDSS-125, 2 RDSS-CLIP-125 3.4 (87) 5.00 (125) RDSS-125 4.1 (104) RDSS-125, 1 RDSS-CLIP-125 3.9 (98) RDSS-125, 2 RDSS-CLIP-125 3.7 (93) 5.25 (133) RDSS-150† 4.3 (109) RDSS-150†, 1 RDSS-CLIP-150 4.1 (104) RDSS-150†, 2 RDSS-CLIP-150 3.9 (98) 5.50 (140) RDSS-150† 4.7 (120) RDSS-150†, 1 RDSS-CLIP-150 4.5 (114) RDSS-150†, 2 RDSS-CLIP-150 4.3 (109) 5.75 (146) RDSS-150† 4.9 (124) RDSS-150†, 1 RDSS-CLIP-150 4.7 (119) RDSS-150†, 2 RDSS-CLIP-150 4.5 (114) 6.00 (150) RDSS-150† 5.1 (129) RDSS-150†, 1 RDSS-CLIP-150 4.9 (124) RDSS-150†, 2 RDSS-CLIP-150 4.7 (120) 6.25 (159) RDSS-150† 5.4 (138) RDSS-150†, 1 RDSS-CLIP-150 5.2 (133) RDSS-150†, 2 RDSS-CLIP-150 5.0 (125) 6.50-8.00 (165-210) Ducts in this range require the use of RDSS-AD-210 adapter. Contact your TE representative for a pplication information. 267 Conduit & Cable Sealing RDSS Installation Tools RDSS duct seals can be installed with a variety of inflation tools having the capability of inflating RDSS to 45±3 psi (3 bar) of pressure. The tools TE Connectivity offers are summarized in the table below. The tool will only accept 16-gr CO2 gas cylinders (listed below). RDSS-IT-16 RDSS-IG-SR-AS Catalog Number RDSS-IT-16 Description Inflation tool designed with an ON/OFF switch and an automatic pressure-monitoring system. The required CO2 gas cylinders (E7512-0160) must be ordered separately. E7512-0160 16-gr CO2 gas cylinders for the RDSS-IT-16 tool. Each gas cylinder inflates approximately four RDSS-100 duct seals. RDSS-IG-SR-AS Inflation tool designed for use with customer’s own source of nitrogen or compressed air. Features a pressure gauge, automatic shutoff, VGF valve connection, and two alternate connections for plastic or rubber hoses. E7512-0220 Tube snap assembly. Spare part for RDSS-IT-16 inflation tool. E7512-0240 Spare pressure gauge assembly for RDSS-IT-16 inflation tool. E7512-0260 Spare delivery pipe for RDSS-IT-16 inflation tool. S-1278-3 x 61 x 7620 RDSS sealant roll. RDSS-AT/AP-150 For use with the RDSS-150 in duct 5.25" or larger with cable/cable bundles less than 2.4" (60 mm) in diameter. RDSS-AD-210 Adapter for ducts 6.5 - 8.0" (165 - 210 mm) diameter E4540-1250 RDSS-LUBE for installation of RDSS. Std. Pack 1 tool/box 10 cylinders/ box 1 tool/box 1 each/box 1 each/box 1 each box 1 25-ft roll/box 1 each/box 4 each/box 25 each/box Blank Duct Plug ACCESSORIES ACCESSORIES&&TOOLS TOOLS Duct Plug | Sealing Ducts 268 TE’s Raychem Blank Duct Plugs effectively seal empty conduits to reduce the cost of cable placement and maintenance in new underground construction projects and routine work. Plugs are removable and reusable providing a more economical sealing solution. These plugs prevent the flow of water and the costly sedimentation of duct banks and conduit systems while confining problems of dangerous vapors to their source. C_BlankDuct Manufactured from high-impact plastic components, combined with durable elastic gaskets, blank plugs are corrosion proof and effective for long-term or temporary sealing. Each blank plug is equipped with a rope tie mechanism that provides the benefit of securing a pull rope to plug’s back compression plate and the allowance of storing excess slack rope behind the plug within the conduit system for future use. • All plastic construction • Corrosion proof • Water and gas tight • Easy Installation and removal • Fully removable and reusable Selection Information: dimensions in inches (millimeters) Catalog Number RBDP-BLA-10D104U RBDP-BLA-12D148U RBDP-BLA-15D183U RBDP-BLA-20D236U RBDP-BLA-30D346U RBDP-BLA-40D402U RBDP-BLA-50D535U RBDP-BLA-60D637U RBDP-BLA-80D816U Plug Diameter 1.00 1.25 1.50 2.00 3.00 4.00 5.00 6.00 8.00 Duct ID 0.96-1.16 1.14-1.48 1.49-1.83 1.83-2.36 2.99-3.46 3.94-4.17 5.00-5.35 5.82-6.37 7.83-8.27 (24.4-29.5) (29.0-37.6) (37.8-46.5) (46.5-59.9) (75.9-87.9) (100.0-105.9) (127.0-135.9) (147.8-161.8) (198.9-210.1) STD Pack 12 12 12 12 12 8 8 8 8 RAYCHEM cable accessories ALR photocontrols AMP connectors 268 Torches & Accessories Torches These clean-burning, efficient, heat-shrinking torches are recommended for shrinking high voltage products through low voltage products Selection information Primus-Sievert Siever-Matic Torch Materials C_Torches FH-3366-97-PS-HANDLE • Siever-Matic S auto ignite, auto shut-off torch handle • Ergonomic design ensures comfortable operation • Adjustable output • Piezo ignition FH-AD-3061-23-PS-REGULATOR • Works with torch handle FH-3366-97-PS-HANDLE above • Adjustable from 14-57psi • Fitting POL, UNF 9/16 inch LH • Requires torch hose AD-1432 or AD-1434 FH-AD-3347-91-PS-BURN-1 • Works with torch handle FH-3366-97-PS-HANDLE above • Recommended especially for low voltage and general purpose products • Tip diameter 1.0 inch 20,000BTU/hour FH-AD-3348-91-PS-BURN-2 • Works with torch handle FH-3366-97-PS-HANDLE above • Recommended especially for Raysulate products • Tip diameter 2.0 inch 90,000BTU/hour Bullfinch Torch Materials FH-2629-TORCH ASSY • Built-in ingnitor recommended for all products • General purpose, heavy-duty propane torch with comfortable grip • Provides a clean burning flame for shrinking high voltage products or thick-wall low voltage products. • Output: Approximately 30,000 BTU/Hour FH-2629-ELECTRODE • Replacement ignitor for FH-2629 torch RAYCHEM cable accessories ALR photocontrols AMP connectors 269 ACCESSORIES & TOOLS FH-AD-3341-91-PS-BURN1.5 • Works with torch handle FH-3366-97-PS-HANDLE above • Recommended especially for low voltage products and high voltage terminations and splices • Tip diameter 1.5 inch 40,000BTU/hour 269 MEDIUM / HIGH VOLTAGE CABLE ACCESSORIES Torches & Accessories C_Torch_Accessories Torch Accessories AD-1358-LPG-REGW/GAGE • Propane tank regulator with gauge (0–30 psi) • Can also be used with Primus-Sievert or BullFinch products AD-1432-ACD10FT-LPG-HOSE • 10-foot LPG hose AD-1434-ACD30FT-LPG-HOSE • 30-foot LPG hose AD-1460-ACD-HEAT-SHLDGPA • 12 x 40 pad woven of heat-resistant fabric with corner grommets • Protects adjacent components from torch heat during installation of heat-shrinkable products in confined areas AD-1563-ADAPTER • Valve to standard hose • For use with FH-2618A-1 propane torch if disposable cylinders are not used AD-3015-04 • Adapts Siever-Matic S FH-2649-PS-KIT or FH2629 for use with disposable 14.1 oz propane cylinders • Includes 4-foot hose and regulator preset at 28 psi Torch Kits ACCESSORIES & TOOLS C_Torch_Kits 270 FH-2618A-1 • Light, portable propane torch for installing low voltage products and smaller, conductor-sized, high-voltage (up to 15 kV) accessories • Includes hose, handle assembly, and regulator for disposable propane cylinder • Operates from disposable 14.1 oz. propane cylinders • Output: Approximately 20,000 BTU/hour • Handle and torch head not available separately • Regulator and hose assembly is product AD-3015-04 FH-2629-Kit • Includes (AD-1432) 10 foot hose, (AD-1358) adjustable regulator, and (FH-2629-TORCH-ASSY) torch handle and tip FH-2640-PS-KIT • Primus-Sievert torch kit for use with disposable propane bottles • Includes (FH-3366-97-PS-HANDLE, FH-AD-3341-91-PS-BURN1.5, & AD-3015-04) FH-2649-PS-KIT • Seiver-Matic S auto ignite, auto shut-off torch system • Recommended especially for Raysulate products and can be used with all products • Includes ergonomic handle, 30 foot hose, adjustable regulator, and large burner (3348-91); all in a canvas carrying bag • Output: Approximately 90,000 BTU/hour • Smaller burner and adapter for disposable bottles available. Includes: FH-3366-97-PS-HANDLE, FH-AD-3348-91-PS-BURN-2, FH-AD-3061-13-PS-REGULAT, AD-1434-ACD30FT-LPG-HOSE, and a carrying bag RAYCHEM cable accessories ALR photocontrols AMP connectors 270 Torches & Accessories Heat Guns These hot-air heat guns are ideal for shrinking small low voltage products and identification marking sleeves. Heat guns are not recommended for shrinking high voltage products or thick-wall low voltage products. C_Heat_Guns FH-PS-2001 Primus-Sievert model with increased air flow allows faster shrinking. 120V, 1750 watt, 80°F – 1100°F, Variable air flow: 21 cfm max., double insulated LED read out. This heat gun can be used for shrinking thick-wall low voltage products. HG-501A 115 Volts 462047 500°F – 750°F hot-air gun ideal for shrinking ShrinkMark or TMS marking products, and thin-wall tubing. Includes stand. Reflector must beordered separately. CUS Listed Heat Gun 16C6 HG-751A-C 120 Volts 926935 750°F – 1000°F hot-air gun for shrinking low voltage and marking products. Includes stand. Reflector must be ordered separately. Heat Gun Accessories Catalog Number TG-12 Reflector TG-13 Reflector TG-23 Reflector TG-24 Reflector Description Use on tubing Use on tubing Use on tubing Use on tubing up to 3/4 inch in diameter. up to 2 inches in diameter. and cable breakouts up to 1 3/4 inches in diameter. and cable breakouts up to 3 1/4 inches in diameter. Ordering Information Standard package: 1 each/box. Glow Torch Lightweight, portable, and ergonomic design Provides a wide-flame torch output for instant controlled heating Automatic Piezo Electronics Ignition System Attaches directly to 1 lb or 2 lb disposable propane bottles Installs thin wall, dual wall and adhesive lined heat-shrink tubing and sleeves Selection Information: C_Glow_Torch Catalog Number CPGI-GLOW-TORCH Description Wide-Flame Torch Std. Pack 10 Glow Gun • • • • • Lightweight, portable, and ergonomic design Provides a wide-flame torch output for instant controlled heating Automatic Piezo Electronics Ignition System Attaches directly to 1 lb or 2 lb disposable propane bottles Installs thin wall, dual wall and adhesive lined heat-shrink tubing and sleeves Selection Information: C_Glow_Gun Catalog Number CPGI-GLOW-GUN Description Flameless heat gun RAYCHEM cable accessories ALR photocontrols AMP connectors Std. Pack 10 271 ACCESSORIES&&TOOLS TOOLS ACCESSORIES • • • • • 271 Tools Splicing Tools EXRM-1004-US - Insulation Removal Tool • Description – hand tool for making ring cuts on cable jackets and EPR insulation. • Length = 7.5 inches • Ring cut range - .50-2.00 inches C_Splicing_Tools EXRM-0607 - Cable Splice Knife • Special purpose short blade • Comfortable full-size handle • Finest cuttery steel, tough and carefully tempered to hold its edge Impact Wrench IT-1000-033-US - Cordless Impact Wrench • Easy and quick installation of mechanical ShearBolt connectors • Powerful design, class leading torque - 1,460 in-lbs • Includes battery charger two 12 volt NI-Mlt batteries carrying case, sockets 1/2" hexagonal socket sizes 10, 13, 17, 19, 22, 27, 1/4" hexagonal adapter CA7478-000 - Battery for Cordless Impact Wrench CA7476-000 - Charger for Battery Wire Cutters ACCESSORIES & TOOLS 605744-1 - 350 MCM Cutter • Suitable for copper and aluminum up to 350 MCM • Steel handles • Not for steel or ACSR cable 272 C_WireCutters 605742-1 - 500 MCM Cutter • Suitable for copper and aluminum up to 500 MCM • 21 inches overall length • Fiberglass handles • Not for steel or ACSR cable RAYCHEM cable accessories ALR photocontrols AMP connectors 272 Tools Cable Cutters 1490489-1 • Suitable for copper or aluminum, solid or stranded to 350 MCM • Ratchet mechanism keeps handle force low • Handles lock together for safety/storage • Compact design for easy fit into tight places • Quick-release lever for easy take-up • Ideal for cutting cable up to 2/0 • Also cuts coax cable up to RG-9 607453-2 1 • Great for copper and aluminum cable up to 1.5” diameter • Light weight tubular steel handles with vinyl hand grips • Fixed and moving blade made from high grade alloy steel • Fast advance button to minimize required motion • Combines light weight and ratcheted mechanical advantage in its circular cutting motion • Weight 3.27 Lb [1.49 Kg] • Not for steel or ACSR cable 169415-1 • Solid and stranded copper and aluminium cables • Solid Cu 185 mm² • Solid Al 240 mm² • Stranded Cu / Al Ø25 • Hi Flex Cu Ø32 C_CableCutters 734045-1 • Solid and stranded copper and aluminium cables • Solid Cu 185 mm² • Solid Al 185 mm² • Stranded Cu / Al Ø52 • Hi Flex Cu Ø52 1-1579002-8 • Solid and stranded copper and aluminium cables (no ASCR) • Solid Cu 480 mm² • Solid Al 480 mm² • Stranded Cu / Al Ø54 Cable Vise IT 1000-002 The IT-1000-002 cable vice is for fast and easy installation of joints and the repair of cables. An adaptor is included which enables the cable vice to be used for the installation of terminations. Suitable for field installation and for workshop use. When fixed to a work bench, the upper part with the clamps can be used without the legs. Cable vice for the installation of joints and the repair of cables. Cable Vise Adaptor and Clamp (comes with Cable Vise) Adaptor and clamp for the installation of termations C_CableVise RAYCHEM cable accessories ALR photocontrols AMP connectors 273 ACCESSORIES & TOOLS KMS-K-INT • Cable Sheath cutter 273 Tools Tool Sets IT-1000-006 - Assortment of Tools • 1x Pipe Wrench, size 9.84" (250 mm) • 1x Side cutter, size 6.30" (160 mm) • 1x Pincers, size 7.08" (180 mm) • 1x Combination Pliers, size 7.08" (180 mm) • 1x Scissors, size 7.87" (200 mm) IT-1000-019 - Installation tool for mechanical connectors This tool avoids the cable cores being over bend during installation of mechanical connectors Application diameter range: .59"-2.36" (15-60 mm). Length of handle: 8.07" (205 mm) 734587-1 - Cable Tie Gun • For cable ties 3.3-4.8 mm • Thickness up to 1.6 mm • Automatic cut-off • Adjustable tension setting C_ToolSets Stripping Tools IT-1000-030-2 - Screen Removal Tool • Screen Removal Tool IT-1000-030-2 for bonded screens on round conductors of MV Cables includes: 1 spare blade, silicone grease and allen key delivered in a roburst polypropylene box. • Suitable for one and three core cables. • Application range over insulation .39”-1.97” (10-50 mm), Min screen cutback .39” (10mm), variable cutting thickness ACCESSORIES & TOOLS IT-1000-030-2-BLADE - SIML 0-711744-1 • Cable Jacket/lead removal tool 274 SIMIL 0711744-1 Cable jacket / lead removal tool PG2, cable diameter .83”-1.37” (21-33 mm) SIML 0-711745-1 Cable Jacket / lead removal tool-PG3 Cable Diameter 1.02”-2.04” (26-52 mm) SIML 0-711746-1 Cable Jacket / lead removal tool-PG3 Cable Diameter 1.85”-2.95” (47-75 mm) SIML 0-0711748-1 Strip insulation of MV cables of diameter between .55”-1.57” (14-40 mm) SIML 0-0711749-1 Strip insulation of MV cables of diameter between 1.50”-2.36” (38-60 mm) LHM 1R 30/45 - 0-0716541-1 To strip non-bonded semiconductive screen of MV cables of diameter between .55”-1.57” (14-40 mm) C_StrippingTools RAYCHEM cable accessories ALR photocontrols AMP connectors 274
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Instance ID : uuid:37092f0b-7bcc-eb45-bdce-65e2125c6e38 Document ID : xmp.did:81E756F4852068118083C31A478B620F Original Document ID : adobe:docid:indd:ef130234-9e1b-11de-a618-c0f8d5e22ec7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5A7063D3852068118083C31A478B620F Derived From Document ID : xmp.did:0A26F8434B2168118A6DBBA18D6931A6 Derived From Original Document ID: adobe:docid:indd:ef130234-9e1b-11de-a618-c0f8d5e22ec7 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:74117FE220071168B9229764B4F51DB6, xmp.iid:AD6DCF92202B1168B9229764B4F51DB6, xmp.iid:8405564D20091168907B90FE9FDF872A, xmp.iid:8405564E20091168907B90FE9FDF872A, xmp.iid:8405564F20091168907B90FE9FDF872A, xmp.iid:8405565020091168907B90FE9FDF872A, xmp.iid:8405565120091168907B90FE9FDF872A, xmp.iid:8405565320091168907B90FE9FDF872A, xmp.iid:8405565620091168907B90FE9FDF872A, xmp.iid:A39ED60F20B01168907B90FE9FDF872A, xmp.iid:A39ED61020B01168907B90FE9FDF872A, xmp.iid:A39ED61120B01168907B90FE9FDF872A, xmp.iid:A39ED61220B01168907B90FE9FDF872A, xmp.iid:A39ED61420B01168907B90FE9FDF872A, xmp.iid:A39ED61520B01168907B90FE9FDF872A, xmp.iid:9EF1C33320CC1168907B90FE9FDF872A, xmp.iid:9EF1C33420CC1168907B90FE9FDF872A, xmp.iid:9EF1C33520CC1168907B90FE9FDF872A, xmp.iid:9EF1C33620CC1168907B90FE9FDF872A, xmp.iid:9EF1C33720CC1168907B90FE9FDF872A, xmp.iid:B5B78111218A1168907B90FE9FDF872A, xmp.iid:B5B78112218A1168907B90FE9FDF872A, xmp.iid:B5B78113218A1168907B90FE9FDF872A, xmp.iid:B5B78114218A1168907B90FE9FDF872A, xmp.iid:B5B78115218A1168907B90FE9FDF872A, xmp.iid:B5B78116218A1168907B90FE9FDF872A, xmp.iid:B5B78117218A1168907B90FE9FDF872A, xmp.iid:B5B78119218A1168907B90FE9FDF872A, xmp.iid:DC8639DC22201168907B90FE9FDF872A, xmp.iid:DC8639DD22201168907B90FE9FDF872A, xmp.iid:DC8639DE22201168907B90FE9FDF872A, xmp.iid:DC8639DF22201168907B90FE9FDF872A, xmp.iid:DC8639E022201168907B90FE9FDF872A, xmp.iid:DC8639E122201168907B90FE9FDF872A, xmp.iid:74117FA720071168958D9D0F6593D9DA, xmp.iid:74117FA52007116896A6DDEF932A38FF, xmp.iid:74117FA62007116896A6DDEF932A38FF, xmp.iid:3A607DA6203A116896A6DDEF932A38FF, xmp.iid:3A607DA9203A116896A6DDEF932A38FF, xmp.iid:3A607DAA203A116896A6DDEF932A38FF, xmp.iid:3A607DAB203A116896A6DDEF932A38FF, xmp.iid:3A607DAC203A116896A6DDEF932A38FF, xmp.iid:74117FB120071168AAE69DDCFA2EB4A2, xmp.iid:74117FB220071168AAE69DDCFA2EB4A2, xmp.iid:74117FB320071168AAE69DDCFA2EB4A2, xmp.iid:74117FB420071168AAE69DDCFA2EB4A2, xmp.iid:74117FB520071168AAE69DDCFA2EB4A2, xmp.iid:74117FB820071168AAE69DDCFA2EB4A2, xmp.iid:74117FB920071168AAE69DDCFA2EB4A2, xmp.iid:201DA19D20191168AAE69DDCFA2EB4A2, xmp.iid:201DA1A020191168AAE69DDCFA2EB4A2, xmp.iid:201DA1A120191168AAE69DDCFA2EB4A2, xmp.iid:74117FD92007116887C098710308537D, xmp.iid:74117FDA2007116887C098710308537D, xmp.iid:74117FDB2007116887C098710308537D, xmp.iid:74117FDC2007116887C098710308537D, xmp.iid:74117FDD2007116887C098710308537D, xmp.iid:74117FDE2007116887C098710308537D, xmp.iid:6A93C091200E1168AD3DD2D89840F3E7, xmp.iid:F36EE99E20BD1168AD3DD2D89840F3E7, xmp.iid:F64B044720D41168BA04952C997A2413, xmp.iid:F64B044820D41168BA04952C997A2413, xmp.iid:F64B044A20D41168BA04952C997A2413, xmp.iid:F64B044B20D41168BA04952C997A2413, xmp.iid:78C7A867202C1168A11EAABDBEEC0584, xmp.iid:0D1052CE20EA1168A11EAABDBEEC0584, xmp.iid:0D1052CF20EA1168A11EAABDBEEC0584, xmp.iid:0F87E0C8200911689DD0B7A0AD1CA50B, xmp.iid:D49F6749200911689DD0B7A0AD1CA50B, xmp.iid:F02075B4204E11689DD0B7A0AD1CA50B, xmp.iid:F02075BA204E11689DD0B7A0AD1CA50B, xmp.iid:E1F1C80920E011689DD0B7A0AD1CA50B, xmp.iid:E1F1C80A20E011689DD0B7A0AD1CA50B, xmp.iid:E1F1C80F20E011689DD0B7A0AD1CA50B, xmp.iid:579BD79C20E01168A11EBE1682F1F5AF, xmp.iid:579BD79D20E01168A11EBE1682F1F5AF, xmp.iid:71489A4820FA1168A11EBE1682F1F5AF, xmp.iid:71489A4920FA1168A11EBE1682F1F5AF, xmp.iid:4CE4CC3721051168A11EBE1682F1F5AF, xmp.iid:4CE4CC3821051168A11EBE1682F1F5AF, xmp.iid:4CE4CC3921051168A11EBE1682F1F5AF, xmp.iid:4CE4CC3A21051168A11EBE1682F1F5AF, xmp.iid:6F2B637A21901168A11EBE1682F1F5AF, xmp.iid:0318DE0220D311688A8AA025C22936C1, xmp.iid:03CFE8C620B611689D5AB947FD62111C, xmp.iid:A062CEA120931168A97EAA04DFC84127, xmp.iid:C72649ED20A91168A97EAA04DFC84127, xmp.iid:C72649EE20A91168A97EAA04DFC84127, xmp.iid:A0C47FBD8F20681197A5D954A1F6F796, xmp.iid:A1C47FBD8F20681197A5D954A1F6F796, xmp.iid:A2C47FBD8F20681197A5D954A1F6F796, xmp.iid:A3C47FBD8F20681197A5D954A1F6F796, xmp.iid:A4C47FBD8F20681197A5D954A1F6F796, xmp.iid:A5C47FBD8F20681197A5D954A1F6F796, xmp.iid:A6C47FBD8F20681197A5D954A1F6F796, xmp.iid:A7C47FBD8F20681197A5D954A1F6F796, xmp.iid:A8C47FBD8F20681197A5D954A1F6F796, xmp.iid:281E06D2ED20681197A5D954A1F6F796, xmp.iid:291E06D2ED20681197A5D954A1F6F796, xmp.iid:2A1E06D2ED20681197A5D954A1F6F796, xmp.iid:2B1E06D2ED20681197A5D954A1F6F796, xmp.iid:2C1E06D2ED20681197A5D954A1F6F796, xmp.iid:2D1E06D2ED20681197A5D954A1F6F796, xmp.iid:2E1E06D2ED20681197A5D954A1F6F796, xmp.iid:2F1E06D2ED20681197A5D954A1F6F796, xmp.iid:301E06D2ED20681197A5D954A1F6F796, xmp.iid:311E06D2ED20681197A5D954A1F6F796, xmp.iid:321E06D2ED20681197A5D954A1F6F796, xmp.iid:AEF9EFD4EF20681197A5D954A1F6F796, xmp.iid:FA7F117407206811994C994CFDC6E2B9, xmp.iid:B124B98EED2068118F62CB12D9E028D8, xmp.iid:B224B98EED2068118F62CB12D9E028D8, xmp.iid:3ADE2863F42068118F62CB12D9E028D8, xmp.iid:3BDE2863F42068118F62CB12D9E028D8, xmp.iid:3CDE2863F42068118F62CB12D9E028D8, xmp.iid:F43806F7A020681197A5C0E95BB803E1, xmp.iid:B6E8C03FA220681197A5C0E95BB803E1, xmp.iid:5C30A74DF020681197A5C0E95BB803E1, xmp.iid:F77F11740720681188C6C9148291AA7A, xmp.iid:01801174072068119457CBA290F71DF6, xmp.iid:02801174072068119457CBA290F71DF6, xmp.iid:03801174072068119457CBA290F71DF6, xmp.iid:0A801174072068119457CBA290F71DF6, xmp.iid:3CBDE8D1712068119457CBA290F71DF6, xmp.iid:40EBF9A74C2268119457CBA290F71DF6, xmp.iid:925EC573712068118F62859EF71A62FF, xmp.iid:935EC573712068118F62859EF71A62FF, xmp.iid:6F10C12138206811AE43A85ADC682B5A, xmp.iid:0480117407206811BEDC903E4789CC61, xmp.iid:F87F1174072068118A6DC36E261C8FDC, xmp.iid:F97F1174072068118A6DC36E261C8FDC, xmp.iid:FB7F1174072068118A6DC36E261C8FDC, xmp.iid:72EE15A2A62068118A6DC36E261C8FDC, xmp.iid:73EE15A2A62068118A6DC36E261C8FDC, xmp.iid:B2684998F22068118A6DC36E261C8FDC, xmp.iid:B3684998F22068118A6DC36E261C8FDC, xmp.iid:EA36F306062168118A6DC36E261C8FDC, xmp.iid:A56B4055612168118A6DC36E261C8FDC, xmp.iid:AB6B4055612168118A6DC36E261C8FDC, xmp.iid:018011740720681195FE980E25B635A1, xmp.iid:028011740720681195FE980E25B635A1, xmp.iid:03579AFEC12168118A6DB46DBF09B37D, xmp.iid:0826F8434B2168118A6DBBA18D6931A6, xmp.iid:0926F8434B2168118A6DBBA18D6931A6, xmp.iid:0A26F8434B2168118A6DBBA18D6931A6, xmp.iid:6E213D4E5F206811A6139136B8029611, xmp.iid:1A4B2F100E206811822AE4B3E9C5A84C, xmp.iid:FE4933100E206811822AE4B3E9C5A84C, xmp.iid:581176D4072068118083D93839771CD1, xmp.iid:A2DD72EC072068118083D93839771CD1, xmp.iid:601C9B3D082068118083D93839771CD1, xmp.iid:152E6C4A082068118083D93839771CD1, xmp.iid:484709FD162068118C14D59B5B797E87, xmp.iid:3AA91D9015206811822AF86A679B8BEA, xmp.iid:7EC7A0DA15206811822AF86A679B8BEA, xmp.iid:28D377DD122068118083CB716E31182C, xmp.iid:E0FFFC598D2168118083CB716E31182C, xmp.iid:22FA5E50852068118083C31A478B620F, xmp.iid:587063D3852068118083C31A478B620F, xmp.iid:597063D3852068118083C31A478B620F, xmp.iid:5A7063D3852068118083C31A478B620F, xmp.iid:81E756F4852068118083C31A478B620F, xmp.iid:2430CD3DF32068118083C31A478B620F, xmp.iid:35306197F62168118083A9EF071653C7, xmp.iid:E513CD0FEC2268118083A9EF071653C7 History When : 2009:09:11 19:20:13-04:00, 2009:09:11 19:20:13-04:00, 2009:09:14 08:42:28-04:00, 2009:09:14 08:50:35-04:00, 2009:09:14 09:29:14-04:00, 2009:09:14 10:39:03-04:00, 2009:09:14 10:46:37-04:00, 2009:09:14 12:14:34-04:00, 2009:09:14 12:33:24-04:00, 2009:09:14 13:46:09-04:00, 2009:09:14 13:57:01-04:00, 2009:09:14 15:32:12-04:00, 2009:09:14 15:37:29-04:00, 2009:09:14 15:52:47-04:00, 2009:09:14 15:54:32-04:00, 2009:09:14 17:12:10-04:00, 2009:09:14 17:37:50-04:00, 2009:09:14 17:39:02-04:00, 2009:09:14 17:41:18-04:00, 2009:09:14 17:43:55-04:00, 2009:09:15 15:16:49-04:00, 2009:09:15 16:00:47-04:00, 2009:09:15 16:14:33-04:00, 2009:09:15 16:21:54-04:00, 2009:09:15 17:29:43-04:00, 2009:09:15 17:37:15-04:00, 2009:09:15 17:42:03-04:00, 2009:09:15 23:04:57-04:00, 2009:09:16 09:49:47-04:00, 2009:09:16 11:15:53-04:00, 2009:09:16 11:18:24-04:00, 2009:09:16 11:48:29-04:00, 2009:09:16 11:55:15-04:00, 2009:09:16 12:47:16-04:00, 2009:09:16 13:57:23-04:00, 2009:09:21 15:29:45-04:00, 2009:09:21 15:37:27-04:00, 2009:09:21 17:01:04-04:00, 2009:09:22 09:12:40-04:00, 2009:09:22 09:40:22-04:00, 2009:09:22 09:46:05-04:00, 2009:09:22 11:07-04:00, 2009:09:22 11:50:37-04:00, 2009:09:22 11:56:51-04:00, 2009:09:22 12:19:59-04:00, 2009:09:22 12:33:29-04:00, 2009:09:22 12:50:56-04:00, 2009:09:22 13:56:05-04:00, 2009:09:22 13:56:06-04:00, 2009:09:22 14:09:32-04:00, 2009:09:22 14:10:56-04:00, 2009:09:22 14:10:56-04:00, 2009:09:22 14:38:19-04:00, 2009:09:22 14:38:19-04:00, 2009:09:22 14:43:17-04:00, 2009:09:22 14:45:02-04:00, 2009:09:22 15:13:03-04:00, 2009:09:22 15:14:23-04:00, 2009:09:24 13:03:55-04:00, 2009:09:25 14:24:51-04:00, 2009:09:29 15:03:44-04:00, 2009:09:29 15:04:04-04:00, 2009:09:29 15:10:55-04:00, 2009:09:29 15:46:37-04:00, 2009:09:30 14:43:27-04:00, 2009:10:01 14:35:42-04:00, 2009:10:01 14:37:55-04:00, 2009:10:02 10:48:43-04:00, 2009:10:02 10:54:54-04:00, 2009:10:02 19:23:43-04:00, 2009:10:03 12:00:34-04:00, 2009:10:03 12:35:12-04:00, 2009:10:03 12:41:48-04:00, 2009:10:03 13:52:09-04:00, 2009:10:06 12:17:34-04:00, 2009:10:06 12:19:21-04:00, 2009:10:06 15:56:34-04:00, 2009:10:06 16:10:35-04:00, 2009:10:06 16:16:02-04:00, 2009:10:06 16:16:02-04:00, 2009:10:06 16:17:49-04:00, 2009:10:06 16:25:59-04:00, 2009:10:07 08:53:15-04:00, 2009:10:08 16:13:33-04:00, 2009:10:09 14:41:03-04:00, 2009:11:02 11:59:27-05:00, 2009:11:02 13:27:21-05:00, 2009:11:02 13:27:21-05:00, 2011:03:28 08:04:19-04:00, 2011:03:28 08:04:19-04:00, 2011:03:28 08:06:03-04:00, 2011:03:28 08:07:13-04:00, 2011:03:28 08:09:12-04:00, 2011:03:28 08:09:54-04:00, 2011:03:28 08:10:31-04:00, 2011:03:28 08:11:41-04:00, 2011:03:28 08:12:39-04:00, 2011:03:28 08:13:07-04:00, 2011:03:28 08:14:51-04:00, 2011:03:28 08:16:57-04:00, 2011:03:28 08:19:31-04:00, 2011:03:28 08:21:04-04:00, 2011:03:28 08:21:37-04:00, 2011:03:28 08:22:16-04:00, 2011:03:28 08:23:03-04:00, 2011:03:28 08:24:19-04:00, 2011:03:28 08:25:49-04:00, 2011:03:28 08:27:09-04:00, 2011:03:28 08:27:32-04:00, 2011:04:18 14:28:57-04:00, 2011:04:21 09:22:38-04:00, 2011:04:21 09:25:10-04:00, 2011:04:21 09:27:06-04:00, 2011:04:21 09:27:11-04:00, 2011:04:21 09:38:21-04:00, 2011:04:27 15:56:08-04:00, 2011:04:27 16:12:03-04:00, 2011:04:29 12:22:51-04:00, 2011:04:29 17:16:33-04:00, 2011:05:05 17:14:10-04:00, 2011:05:06 15:06:10-04:00, 2011:05:06 15:06:56-04:00, 2011:05:10 15:52:37-04:00, 2011:05:10 15:53:10-04:00, 2011:05:13 17:03:05-04:00, 2011:05:17 16:46:39-04:00, 2011:05:17 16:48-04:00, 2011:05:24 11:16:50-04:00, 2011:05:25 14:52:41-04:00, 2011:06:06 11:22:16-04:00, 2011:06:06 11:57:32-04:00, 2011:06:06 12:33:27-04:00, 2011:06:09 16:47:22-04:00, 2011:06:09 16:48:31-04:00, 2011:06:10 12:01:47-04:00, 2011:06:10 12:12:56-04:00, 2011:06:10 12:23:47-04:00, 2011:06:13 16:34:57-04:00, 2011:06:14 15:57:37-04:00, 2011:07:25 08:52:15-04:00, 2011:07:25 08:52:48-04:00, 2011:08:16 15:57:17-04:00, 2011:09:02 16:37:47-04:00, 2011:09:02 16:38:20-04:00, 2011:09:02 16:38:20-04:00, 2011:09:07 13:45:29-04:00, 2011:11:02 16:59:47-04:00, 2011:11:02 16:59:47-04:00, 2011:12:05 12:28:02-05:00, 2011:12:05 12:28:42-05:00, 2011:12:05 12:30:58-05:00, 2011:12:05 12:31:20-05:00, 2011:12:14 17:02:34-05:00, 2012:01:06 15:46:43-05:00, 2012:01:06 15:48:48-05:00, 2012:01:17 15:52:01-05:00, 2012:01:20 12:23:28-05:00, 2012:02:08 16:13:43-05:00, 2012:02:08 16:17:23-05:00, 2012:02:08 16:17:49-05:00, 2012:02:08 16:18:18-05:00, 2012:02:08 16:18:18-05:00, 2012:02:09 16:41:27-05:00, 2012:02:29 11:20:14-05:00, 2012:03:01 16:37:20-05:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2012:03:01 16:37:30-05:00 Modify Date : 2012:03:01 16:37:45-05:00 Metadata Date : 2012:03:01 16:37:45-05:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 10251 bytes, use -b option to extract), (Binary data 10431 bytes, use -b option to extract) Doc Change Count : 14833 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 14 Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools