Cree CPY250 LED Canopy Light Spec Sheet; Drop Lens; Flat Lens
2014-10-23
: Pdf 123614-Attachment 123614-Attachment Batch9 unilog
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
CPY Series CPY250™ LED Canopy/Soffit Luminaire Product Description DM Mount The CPY250™ LED Canopy/Soffit Luminaire has an extremely thin profile constructed of rugged cast aluminum. It can be surface mounted easily from below the canopy deck and also has the ability to be pendant mounted or hook & cord mounted. Direct imaging of the LEDs is eliminated with a highly efficient patterned flat or 0.91" (23mm) drop glass lens. Applications: Petroleum canopies, CNG fueling stations, low-medium bay general lighting, soffits Performance Summary Flat Lens Made in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 4000K (+/- 300K), 5700K (+/- 500K) Standard Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish IP66 Rated (Direct Mount only) Class I, Division II Hazardous Location for select models Drop Lens Accessories Field-Installed Direct Mount Luminaires Canopy Upgrade Kits XA-BXCCMW – for use with Jet-Phillips XA-BXCCNW – for use with Elsco Franciscan XA-BXCCPW – for use with LSI Dakota or Masters XA-BXCCQW – for use with Whiteway Riviera or Rig-A-Lite XA-BXCCRW – for use with Elsco Merrit XA-BXCCSW – for use with LSI Richmond or Whiteway Civic Direct Mount Junction Box/Stem Kit XA-BXCCJBOX – 6.0" (152mm) H x 3/4" (19mm) NPT Stem - Watertight - Rated for feed through 8 (4 in, 4 out) #12 AWC conductors Pendant Mount Luminaires Fitting XA-PSFTG – Pendant Fitting Pendant Mount Kits XA-PS22KIT – 22" (559mm) XA-PS12KIT – 12" (305mm) XA-PS18KIT – 18" (457mm) - Pendant height from ceiling surface to bottom of fixture; mounting accessories or surface boxes will add to overall height 0.91" (23mm) Drop Lens 2.0" (50mm) Flat Glass Lens 3/4" (19mm) NPT Conduit Entry Gasket to Seal up to 4.25" (108mm) Canopy Cutout Direct Mount Beauty Plates XA-BXCCBPW – Plate Only XA-BXCCBPB12W – Plate w/ 12" (305mm) Backer XA-BXCCBPB16W – Plate w/ 16" (406mm) Backer 7.2" (183mm) Mounts with (4) Supplied Self-Sealing Sheet Metal Screws 15.0" (382mm) 11.0" (279mm) Click below to select Quick Ship products CPY250-A-DM-F-A-UL-WH CPY250-A-DM-D-A-UL-WH For full list of Cree Quick Ship products visit www.cree.com/lighting/quickship Ordering Information Example: CPY250 A DM D A-UL SV CPY250 A Product Version Mounting Optic CPY250 A DM Direct HC Hook & Cord PD Pendant D 0.91" (23mm) Drop Lens F Flat Lens Input Power Designator A 82W B 122W C 43W – Voltage – US * Canada UL Universal 120-277V UH Universal 347-480V* Color Options SV Silver BK Black BZ Bronze PB Platinum Bronze WH White Options 40K 4000K Color Temperature -- Color temperature per luminaire DIM 0-10V Dimming -- Available with Input Power Designator B only -- Control by others -- Refer to Dimming spec sheet for details -- Can't exceed wattage of specified Input Power Designator ML Multi-Level -- Available with Input Power Designator B only -- Refer to ML spec sheet for details -- High: 100%, Low: 30% PML Programmable Multi-Level -- Available with Input Power Designator B only -- Refer to PML spec sheet for details † See www.cree.com/lighting/products/warranty for warranty terms * Available with A & B Input Power Designators only. For input power for 347-480V, refer to Electrical Data table below Rev. Date: V3 09/17/2014 US: www.cree.com/lighting T (800) 236-6800 F (262) 504-5415 Canada: www.cree.com/canada T (800) 473-1234 F (800) 890-7507 CPY Series Product Specifications Electrical Data* CONSTRUCTION & MATERIALS • Slim, low profile design • Easy mounting and servicing from below the deck • Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED • Direct mount is suitable for use in single or double skin canopies with a minimum 4.0" (102mm) wide panels and a minimum 22 gauge, 0.030" (0.7mm) canopy thickness • Direct mount luminaire mounts directly to the canopy deck with the drilling of a single 2.0" (51mm) to 4.0" (102mm) round hole, is secured in place with selfsealing screws that provide water-tight seal and includes 3/4” (19mm) conduit entry for direct wire feed Input Power Designator System Watts 120-277V System Watts 347-480V A 82 B C Total Current 120V 208V 240V 277V 347V 480V 84 0.69 0.40 0.35 0.32 0.24 0.18 122 137 1.04 0.60 0.52 0.46 0.40 0.29 43 N/A 0.35 0.21 0.19 0.17 N/A N/A * Electrical data at 25˚C (77˚F) • Hook and cord mount includes a 3' (0.91m) cord out of the fixture and is intended to hang from the single hook Recommended Cree® Outdoor Luminaire Lumen Maintenance Factors (LMF)1 • Pendant mount includes J-Box for customer wiring and is intended to be mounted by 3/4 IP pendant (by others) • Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Silver, bronze, black, white, and platinum bronze are available • Weight: 12.5 lbs. (5.7kg) ELECTRICAL SYSTEM • Input Voltage: 120-277V or 347-480V (A and B Input Power Designators only), 50/60Hz, Class 1 drivers Ambient Input Power Designator 5˚C (41˚F) B 10˚C (50˚F) B 15˚C (59˚F) B 20˚C (68˚F) B 25˚C (77˚F) B 30˚C (86˚F) B • Power Factor: > 0.9 at full load • Total Harmonic Distortion: < 20% at full load • Integral 6kV surge suppression protection standard • To address inrush current, slow blow fuse or type C/D breaker should be used • Operating Temperature Range: A Input Power Designator: -40˚C - +40˚C (direct mount to plywood), -40˚C - +45˚C (direct mount to sheet metal/suspended); B Input Power Designator: -40˚C - +35˚C (plywood), -40˚C - +40˚C (sheet metal/ suspended); C Input Power Designator: -40˚C - +45˚C (plywood), -40˚C - +50˚C (sheet metal/suspended) WARNING: Exceeding maximum operating temperature may result in thermal foldback REGULATORY & VOLUNTARY QUALIFICATIONS • cULus listed • Suitable for wet locations when ordered with DM mount • Suitable for damp locations when ordered with HC & PD mounts • Enclosure rated IP66 per IEC 60529 when ordered with DM mount • Consult factory for CE Certified products Initial LMF 25K hr Projected2 LMF 50K hr Projected2 LMF 75K hr Calculated3 LMF 100K hr Calculated3 LMF 1.05 1.00 1.00 0.99 0.98 1.04 0.99 0.99 0.98 0.97 1.02 0.97 0.97 0.96 0.95 1.01 0.96 0.96 0.95 0.94 1.00 0.95 0.95 0.94 0.93 1.00 0.95 0.95 0.94 0.93 A C A C A C A C A C A C Lumen maintence values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ luminaire testing In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 1 2 • 6kV surge suppression protection tested in accordance with IEEE / ANSI C62.41.2 • DLC qualified when ordered with A & B input power designators. Please refer to http://www.designlights.org/QPL for most current information • Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117 • Meets Buy American requirements within ARRA • Dark Sky Friendly, IDA Approved. Please refer to http://www.darksky.org/ for most current information • RoHS compliant when ordered with DM mount • Class I, Division II Hazardous Location rated when ordered with the following SKUs: CPY250 A DM D B-UL WH, CPY250 A DM F B-UL WH, CPY250 A DM D B-UH WH and CPY250 A DM F B-UH WH. Consult factory for additional details US: www.cree.com/lighting T (800) 236-6800 F (262) 504-5415 Canada: www.cree.com/canada T (800) 473-1234 F (800) 890-7507 CPY Series Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP certified laboratory. To obtain an IES file specific to your project consult: http://www.cree.com/lighting. DROP LENS 150˚ 3457 150˚ 80' 80' 60' 40' 20' 120˚ 120˚ 20' 40' 60' 80' .1 20' 864 Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. 6.1 5 0m CURB LINE 20' 6.1 60' 60˚ 30˚ 18.3 80' 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 24.4 Position of vertical plane of maximum candlepower. 30˚ CESTL Test Report #: 2013-0111 CPY250 A ** D A-UL Initial Delivered Lumens: 8,356 Input Power Designator CPY250 A ** D A-UL Mounting Height: 15' (4.6m) Initial Delivered Lumens: 8,000 Initial FC at grade 4000K 5700K Initial Delivered Lumens* BUG Ratings** Per TM-15-11 Initial Delivered Lumens* BUG Ratings** Per TM-15-11 A 7,600 B3 U2 G1 8,000 B3 U2 G1 B 12,400 B3 U2 G2 13,000 B3 U2 G2 C 4,400 B2 U2 G1 4,620 B2 U2 G1 12.2 40' 60˚ Drop Lens Distribution 12.2 .2 .5 1 2 0' 90˚ 24.4 18.3 90˚ 40' 1728 90˚ 0' 60' 2593 * Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf. Valid with no tilt FLAT LENS 150˚ 3373 150˚ 80' 80' 60' 120˚ 120˚ 1687 843 Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. 60˚ 0' 20' 40' 60' 20' 24.4 6.1 0m CURB LINE 6.1 40' 12.2 60' 18.3 80' 24.4 18.3 12.2 6.1 0m Flat Lens Distribution 12.2 .5 .1 .2 1 2 5 6.1 12.2 18.3 24.4 24.4 Position of vertical plane of maximum candlepower. 30˚ ITL Test Report #: 76866 CPY250 A ** F A-UL Initial Delivered Lumens: 8,821 80' 18.3 40' 0' 90˚ 60˚ 30˚ 20' 0˚ 20' 90˚ 40' 60' 2530 CPY250 A ** D A-UL Mounting Height: 15' (4.6m) Initial Delivered Lumens: 8,000 Initial FC at grade HC Mount Input Power Designator 4000K 5700K Initial Delivered Lumens* BUG Ratings** Per TM-15-11 Initial Delivered Lumens* BUG Ratings** Per TM-15-11 A 7,600 B3 U0 G1 8,000 B3 U0 G1 B 12,400 B3 U0 G1 13,000 B3 U0 G1 C 4,400 B2 U0 G1 4,620 B2 U0 G1 * Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf. Valid with no tilt PD Mount 15.0" (382mm) 15.0" (382mm) 15.0" (382mm) 15.0" (382mm) 8.0" (203mm) 4.3" (109mm) Pendant Not Included 6.0" (153mm) 8.0" (203mm) 5.9" (149mm) 2014 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. See www.cree.com/patents for patents that cover these products. Cree®, the Cree logo, and Colorfast DeltaGuard® are registered trademarks, and CPY250™ and the Quick Ship logo are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DesignLights Consortium logo and the DLC QPL Listed logo are registered trademarks of Northeast Energy Efficiency Partnerships, Inc. © US: www.cree.com/lighting T (800) 236-6800 F (262) 504-5415 Canada: www.cree.com/canada T (800) 473-1234 F (800) 890-7507
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2014:09:17 14:45:56-05:00 Creator : Adobe InDesign CC 2014 (Macintosh) Keywords : CPY250;, Canopy;, light;, LED, Canopy;, Cree;, LED;, Spec;, Spec, Sheet;, low, cost, canopy;, energy, savings;, illumination;, petroleum;, Watt;, Drop, Lens;, Flat, Lens;, CPY, Series Modify Date : 2014:09:17 14:47:22-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : Cree CPY250 LED Canopy Light Spec Sheet; Drop Lens; Flat Lens Description : Cree CPY250 LED Canopy Light – CPY Series is designed for petroleum canopies, low-medium bay general lighting and soffits...Specifications subject to change without notice – Learn More ... Subject : CPY250, Canopy, light, LED Canopy, Cree, LED, Spec, Spec Sheet, low cost canopy, energy savings, illumination, petroleum, Watt, Drop Lens, Flat Lens, CPY Series Metadata Date : 2014:09:17 14:47:22-05:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:6d3422e8-1206-6140-b4d8-47fdf5cba086 Original Document ID : xmp.did:0A8011740720681192B0C2A48564E0CD Document ID : xmp.id:e1b18f87-426f-4248-87d6-3999dcaa9fb8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:eaa4b4eb-8c05-4f18-8dc7-1558b568641d Derived From Document ID : xmp.did:11d584cc-15d5-44f1-af03-092c8c003ec0 Derived From Original Document ID: xmp.did:0A8011740720681192B0C2A48564E0CD Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2014:09:17 14:45:57-05:00 Producer : Adobe PDF Library 11.0 Trapped : Unknown Startup Profile : Web Slug Family : Roboto Slug Version : 1.200310 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : -- Slug Font Kind : OpenType - TT Slug Checksum : 247897210 Slug Post Script Name : Roboto-Light Slug Font Sense 12 Checksum : 247897210 Page Layout : SinglePage Page Count : 3EXIF Metadata provided by EXIF.tools