Cooper B Line Strut Systems Catalog 124255

: Pdf 124255-Catalog 124255-Catalog Batch9 unilog

Open the PDF directly: View PDF .
Page Count: 252

Download
Open PDF In Browser	View PDF

Strut Systems
SS-12

Channels, Hardware, Fittings, Mechanical & Electrical Accessories,
Special Materials (Aluminum, Stainless Steel, Fiberglass),
Mini Channel, Concrete Inserts, Slotted Angle, Kwik-Wire™,
Dura-Blok™ Supports

INTRODUCTION
Cooper B-Line, Inc. is a leading manufacturer and fabricator of steel
and aluminum products which are used in support of equipment for
industrial, commercial, utility, and OEM installations. Cooper B-Line
is proud of the exacting standards of research, design, engineering,
and manufacturing that go into each and every product that
comprise our metal framing product line. Our customers have
access to the most complete support systems offered in the
industry, including metal framing, cable tray, pipe hangers, slotted
angle, and fasteners.
Many of Cooper B-Line’s products are listed by the Underwriter’s
Laboratories, Inc. All Cooper B-Line products are manufactured to
meet or exceed MFMA and other industry standards set for their
design and manufacture.
The majority of Cooper B-Line products are produced in four
modern plants consisting of approximately 900,000 square feet.
These facilities are located in Highland, Illinois; Troy, Illinois; Reno,
Nevada; and Sherman, Texas. Regional sales and distribution
centers are located throughout the United States stocking standard
Cooper B-Line products for quick service and delivery.
This catalog is designed to be helpful to engineers and contractors
in the application and selection of strut products for construction
and maintenance.
If a unique application requires a special product not included in this
catalog. Cooper B-Line engineering personnel are ready to furnish
design consultation and realistic cost estimates. In addition, sales
representatives with engineering know-how are located throughout
the United States and abroad for your convenience.

B-VOCAL

Questions, Comments, Suggestions?

““

SSSMMM

with Cooper B-Line ”
Cooper B-Line, Inc.
509 West Monroe Street
Highland, Illinois 62249-0326
Phone: 800-851-7415
www.cooperbline.com

© 2012 Cooper B-Line

Voice Of the Customer...Actively Listening
bvocal@cooperindustries.com
877-351-9450

SYSTEMS THAT MAKE SENSE

Table of Contents
Introduction

...........................

2-3

Dura-Blok™ Rooftop Supports
Info. & Specifications . . . . . . . . . . . . . . . 152
Base Support . . . . . . . . . . . . . . . . . . . . . . . 153
Base Support - Channel . . . . . . . . 153-154
Base Support - Pipe/Tubing Riser . . . 154
Base Support Riser - Channel . . . . . . 155
Base Support Riser - Pipe Roller . . . 155
Base Support - ‘H’ Stand . . . . . . . 156-157
Base Support - Pipe Roller . . . . . . . . . 158
Application Photos . . . . . . . . . . . . . . . . . . 159
Roof-Top Walkway Photos . . . . . . . . . . 160
Solar Application Photos . . . . . . . . . . . . 161

Technical Data
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Design of Strut Systems . . . . . . . . . . 10-12
Recommended Specification . . . . . . . . . 13
Channel & Combinations
Info. & Specifications . . . . . . . . . . . . . . . . 14
Selection Chart . . . . . . . . . . . . . . . . . . . . . . 15
B11 Channel . . . . . . . . . . . . . . . . . . . . . 16-17
B12 Channel . . . . . . . . . . . . . . . . . . . . . 18-19
B22 Channel . . . . . . . . . . . . . . . . . . . . . 20-23
B24 Channel . . . . . . . . . . . . . . . . . . . . . 24-25
B26 Channel . . . . . . . . . . . . . . . . . . . . . 26-27
B32 Channel . . . . . . . . . . . . . . . . . . . . . 28-29
B42 Channel . . . . . . . . . . . . . . . . . . . . . 30-31
B52 Channel . . . . . . . . . . . . . . . . . . . . . 32-33
B54 Channel . . . . . . . . . . . . . . . . . . . . . 34-35
B56 Channel . . . . . . . . . . . . . . . . . . . . . 36-37
Telescoping Channel . . . . . . . . . . . . . 38-39
Channel Hole Patterns . . . . . . . . . . . 40-42

Electrical Accessories
Info. & Specifications . . . . . . . . . . . . . . . 162
Selection Chart . . . . . . . . . . . . . . . . . . . . . 163
Fluorescent Fixture Hangers . . . 164-166
Electrical Accessories . . . . . . . . . . 167-168
Junction Boxes . . . . . . . . . . . . . . . . . . . . . 169
Strut Joiners . . . . . . . . . . . . . . . . . . . 170-171
Electrical Hardware . . . . . . . . . . . . . . . . . 172
Porcelain Clamps . . . . . . . . . . . . . . 173-174
Maple Clamps . . . . . . . . . . . . . . . . . 174-175
Aluminum & Stainless Steel Materials
Info. & Specifications . . . . . . . . . . . . . . . 176
Aluminum . . . . . . . . . . . . . . . . . . . . . . 177-179
Stainless Steel . . . . . . . . . . . . . . . . . 180-181

Channel Nuts & Hardware
Info. & Specifications . . . . . . . . . . . . . . . . 44
Channel Nuts
Selection Charts . . . . . . . . . . . . . . . . 45-49
Slip & Pull-out Load Charts . . . . . 50-51
Other Hardware . . . . . . . . . . . . . . . . . . 52-58
KwikWire™ & Accessories . . . . . . . . 59-70

Fiberglass Materials
Info. & Specifications . . . . . . . . . . .
Channels . . . . . . . . . . . . . . . . . . . . . .
Hardware . . . . . . . . . . . . . . . . . . . . . .
Fittings . . . . . . . . . . . . . . . . . . . . . . . .

Strut Fittings
Info. & Specifications . . . . . . . . . . . . . . . . 72
Flat Plate Fittings . . . . . . . . . . . . . . . . . 73-75
90° Angle Fittings . . . . . . . . . . . . . . . . . 76-81
Angular Fittings . . . . . . . . . . . . . . . . . . . 82-84
Braces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Clevis Fittings . . . . . . . . . . . . . . . . . . . . . . . 86
U-Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 87-90
Z-Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 91-93
Wing Fittings . . . . . . . . . . . . . . . . . . . . . 94-96
Post Bases . . . . . . . . . . . . . . . . . . . . . . . 97-98
Brackets . . . . . . . . . . . . . . . . . . . . . . . . 99-105
Miscellaneous Fittings . . . . . . . . . . 106-111

182-183
184-188
188-190
191-199

Mini Channel & Fittings
Info. & Specifications . . . . . . . . . . . . . . . 200
Mini Channels . . . . . . . . . . . . . . . . . 201-202
Mini Channel Nuts . . . . . . . . . . . . . . . . . . 203
Mini Fittings . . . . . . . . . . . . . . . . . . . . 203-211
Concrete Inserts
Info. & Specifications . . . . . . . . . . . 212-213
Continuous Inserts . . . . . . . . . . . . . 214-216
Spot Inserts . . . . . . . . . . . . . . . . . . . . . . . . 217
Insert Accessories . . . . . . . . . . . . . . . . . . 218
Anchors . . . . . . . . . . . . . . . . . . . . . . . 219-221
Slotted Angle
Info. & Specifications . . . . . . . . . . . . . . . 222
Slotted Angle
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Loading Charts . . . . . . . . . . . . . . 224-226
Slotted Angle Fittings . . . . . . . . . . . . . . . 227

Beam Clamps & Accessories
Info. & Specifications . . . . . . . . . . . . . . . 112
Beam Clamps & Accessories . . . 113-125
Pipe/Conduit Clamps & Hangers
Info. & Specifications . . . . . . . . . . . . . . . 126
Pipe Clamps . . . . . . . . . . . . . . . . . . . 127-133
Vibra Clamps . . . . . . . . . . . . . . . . . . 134-135
Armafix™ Clamps & Accessories . . . . 136
Vibra Cushions . . . . . . . . . . . . . . . . . . . . . 137
Pipe Clamps . . . . . . . . . . . . . . . . . . . 138-142
Pipe Hangers . . . . . . . . . . . . . . . . . . 143-144
Pipe Brackets . . . . . . . . . . . . . . . . . . . . . . 145
Pipe Block . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Pipe Rollers . . . . . . . . . . . . . . . . . . . . 147-151

Reference Data

..................
...

238-240

.............................

241-248

Tolco to Cooper B-Line Cross
Index

For additional information on Tolco™ brand part numbers beginning with Fig.,
visit www.tolco.com or www.cooperbline.com
1

228-237

Introduction

Introduction

Cooper B-Line’s metal framing support system is designed with many time-saving features. They are
fully adjustable and reusable, with a complete line of channels, fittings and accessories for multipurpose applications.

• No Welding
• No Drilling
• Use Your Imagination
Cooper B-Line’s metal framing installs quickly. There is
no need for special tools. All you need is a wrench
and hacksaw. Channels and parts can be taken
apart for reuse as quickly as they were assembled,
yet they provide the strength of welded construction.
Eliminating welding and drilling produces substantial
savings in time and labor.

1. Tite-Grip channel nut may be
inserted anywhere along continuous
slot. Designed for easy insertion and
self-alignment.

2. A 90° turn aligns channel nut grooves
with inturned lips of the channel.

3. Position fitting over channel nut and
insert bolt to start any connection.

4. With the twist of a wrench, channel
nut locks its teeth firmly against
inturned lips.

2

Introduction

Introduction

Cooper B-Line’s Metal Framing system provides
an economical solution for electrical, mechanical
and industrial supports with an unlimited variety of
applications in the construction industry.
Metal Framing Electrical Applications
• Lighting Fixture Supports
• Raceway Systems
• Trapeze Hangers
• Pipe & Conduit Supports
• Cable Tray Supports
• Beam Adjustments

Metal Framing Mechanical Applications
• Piping Racks
• Tunnel Pipe Stanchions
• Concrete Inserts
• Beam Attachments
• Pipe Risers
Metal Framing Industrial Applications
• Racks and Shelving
• Partitions
• Production Line Supports
• Trolley Systems
• Wall Framing

3

Technical Data

Technical Data

MATERIALS
Carbon Steel

Aluminum

Channels made from high-quality carbon
steel are continuously roll formed to
precise dimensions. By cold working the
steel mechanical properties are increased,
allowing lightweight structures to carry the
required load. Corrosion resistance of
carbon steel varies widely with coating
and alloy. See “Finishes” for more detailed
information.

Cooper B-Line’s standard aluminum
channel is extruded from aluminum alloy
6063-T6. Strut fittings are made from
aluminum alloy 5052-H32.

concentrated levels of Chlorine, [ Cl- ].
Please consult our fiberglass corrosion
resistance charts on pg. 173 for specific
chemical recommendation data.

The high strength to weight ratio of
channel made of aluminum greatly
reduces the overall cost of installation
through ease of handling and field cutting.

Stainless Steel

Aluminum owes its excellent corrosion
resistance to its ability to form an
aluminum oxide film that immediately
reforms when scratched or cut. In most
outdoor applications, aluminum has
excellent resistance to “weathering”. The
resistance to chemicals, indoor or
outdoor, can best be determined by tests
conducted by the user with exposure to
the specific conditions for which it is
intended. The corrosion resistance of
aluminum to some commonly known
chemicals is shown in the Corrosion
Chart. For further information, contact
Cooper B-Line Systems, Inc. or the
Aluminum Association.

Unlike other base materials depicted in
this catalog, fiberglass exhibits unique
physical property changes when operating
in elevated temperature conditions, that
are a fraction of increase compared to
steel or aluminum. This being true,
Cooper B-Line advises against using
fiberglass in temperatures greater than
200° F.

Stainless steel channel is available in AISI
Type 304 or 316 material. Both are
non-magnetic and belong to the austenitic
stainless steels group, based on alloy
content and crystallographic structure.
Like carbon steel, stainless steel exhibits
increased strength when cold worked by
roll-forming.
Several conditions make the use of
stainless steel ideal. These include
reducing long term maintenance costs,
high ambient temperatures, appearance,
and stable structural properties such as
yield strength, and high creep strength.
Type 304 resists most organic chemicals,
dyestuffs and a wide variety of inorganic
chemicals at elevated or cryogenic
temperatures. Type 316 contains slightly
more nickel and adds molybdenum to give
it better corrosion resistance in chloride
and sulfuric acid environments. More
specific information concerning the
differences between types 304 and 316 is
available from Cooper B-Line.

Please refer to the "Corrosion Resistance
Guide" below for specific applications.
Cooper B-Line Fiberglass Strut systems
are manufactured from glass fiberreinforced plastic shapes that meet ASTM
E-84, Class 1 Flame Rating and selfextinguishing requirements of ASTM
D-635. A surface veil is applied during
pultrusion to insure a resin-rich surface
and ultraviolet resistance.

Fiberglass
Cooper B-Line offers two fire retardant
(FR) resins for strut systems, polyester
and vinyl ester. Both resins are ideal for
corrosive environments or nonconductive
applications with moderate strength
requirements. Some common types of
environments where Vinyl Ester Resins
are recommended, that Poly Esters are
not, are paper mills, most any metal
plating operation and any condition with

While polyester is sufficient for most uses,
vinyl ester is suitable for a broader range
of environments.

6

1A

6

2

ine

B2

0
74

Cooper B-Line Steel Strut is stamped with:

8

SS

Traceable to the steel’s origin
Material/Finish
B-Line part number designation
Company Name

-L

B

4

Technical Data
FINISHES

Chromium/ Zinc

Zinc Coatings
Zinc protects steel in two ways. First it
protects the steel as a coating and
second as a sacrificial anode to repair
bare areas such as cut edges, scratches,
and gouges. The corrosion protection of
zinc is directly related to its thickness and
the environment. This means a .2 mil
coating will last twice as long as a .1 mil
coating in the same environment.
Galvanizing also protects cut and drilled edges.

Chromium/Zinc composition is an
aqueous coating dispersion containing
chromium, proprietary organics, and zinc
flake.
This finish provides 500 hours protection
in salt spray testing per ASTM B117.

Pre-Galvanized Zinc

(Mill galvanized, hot dip mill galvanized or
continuous hot dip galvanized) PreZnO
galvanized steel is produced by coating
coils of sheet steel with zinc by
continuously rolling the material through
molten zinc at the mills. This is also
known as mill galvanized or hot dip mill
Electrogalvanized Zinc
galvanized. These coils are then slit to
Electrogalvanized Zinc (also known as
zinc plated or electroplated) is the process size and fabricated by roll forming,
shearing, punching, or forming to produce
by which a coating of zinc is deposited on
Cooper B-Line pre-galvanized strut
the steel by electrolysis from a bath of
products.
zinc salts.
A rating of SC3, Cooper B-Line’s
standard, provides a minimum zinc
coating thickness of .5 mils (excluding
hardware, which is SC1 = .2 mils).
When exposed to air and moisture, zinc
forms a tough, adherent, protective film
consisting of a mixture of zinc oxides,
hydroxides, and carbonates. This film is in
itself a barrier coating which slows
subsequent corrosive attack on the zinc.
This coating is usually recommended for
indoor use in relatively dry areas, as it
provides ninety-six hours protection in salt
spray testing per ASTM B117.

The G90 specification calls for a coating
of .90 ounces of zinc per square foot of
steel. This results in a coating of .45
ounces per square foot on each side of
the sheet. This is important when
comparing this finish to hot dip galvanized
after fabrication.
During fabrication, cut edges and welded
areas are not normally zinc coated;
however, the zinc near the uncoated
metal becomes a sacrificial anode to
protect the bare areas after a short period
of time.

Hot Dip Galvanized After
Fabrication (Hot dip galvanized or
batch hot dip galvanized)
Hot dip galvanized strut products are
fabricated from steel and then completely
immersed in a bath of molten zinc. A
metallic bond occurs resulting in a zinc
coating that completely coats all surfaces,
including edges and welds.
Another advantage of this method is
coating thickness. Strut products that are
hot dip galvanized after fabrication have a
minimum thickness of 1.50 ounces per
square foot on each side, or a total 3.0
ounces per square foot of steel, according
to ASTM A123.
The zinc thickness is controlled by the
amount of time each part is immersed in
the molten zinc bath as well as the speed
at which it is removed. The term "double
dipping" refers to parts too large to fit into
the galvanizing kettle and, therefore, must
be dipped one end at a time. It does not
refer to extra coating thickness.
The layer of zinc which bonds to steel
provides a dual protection against
corrosion. It protects first as an overall
barrier coating. If this coating happens to
be scratched or gouged, zinc's secondary
defense is called upon to protect the steel
by galvanic action.
Hot-Dip Galvanized After Fabrication is
recommended for prolonged outdoor
exposure and will usually protect steel for
20 years or more in most atmospheric
environments and in many industrial
environments. For best results, a zinc
rich paint (available from Cooper B-Line)
should be applied to field cuts. The
zinc rich paint will provide immediate
protection for these areas and eliminate
the short time period for galvanic action to
“heal” the damaged coating.

Anticipated Life of Zinc Coatings In Various Atmospheric Environments
40
36
29

30
Life
in
Years

Hot Dip Galvanized

= Zinc Coating 1.50 Oz./Ft.2 (.0026” Thick)

Pre-Galvanized

= Zinc Coating 0.45 Oz./Ft.2 (.00075” Thick)

25
21

20

10

10

11

8
7

Rural

18

Tropical
Marine

6

Temperature
Marine

Suburban

Environment

5

5

Urban

3
Highly
Industrial

Technical Data

Zn
ZnFe
Fe

Chromium/ Zinc is a corrosion resistant
composition, which was developed to
protect fasteners and small bulk items for
automotive use. The coating applications
have since been extended to larger parts
and other markets.

Technical Data

Technical Data
Dura-Green™ and Dura-Copper™
Epoxy Coatings

Hanger Equipment for Fire Protection
Service, UL203”.

Dura-Green and Dura-Copper epoxy
coatings are water borne epoxy coatings
applied to Cooper B-Line products by a
precisely controlled cathodic electrodeposition process. This process is
accomplished using a conveyor to
transport channel and fittings through
several cleaning, phosphatizing and
application stages prior to being baked
(See diagram below).

Due to Dura-Green’s organically based
composition, it seats itself into porous
surfaces more completely and efficiently
than zinc coatings. As these porous
caverns are filled along the material
profile, the outer finished surface
demonstrates an increased smooth
uniform plane which produces
considerably less off-gasing when tested.
Cooper B-Line’s Dura-Green channel
meets or exceeds 100 level clean room
standards. This was confirmed by testing
the channel in accordance with Boeing
(PCL) Standards, which are more stringent and complete than ASTM E595-93.
Dura-Green was found to be a superior
finish, due in part to its proven application
process.

This custom-designed paint system is
used for painting all channels, channel
combinations, slotted angle, and fittings.
Samples are selected on a routine basis
for Salt Spray (fog) testing to verify the
quality of the finish. These tests are performed in accordance with ASTM B117
and evaluated and related according to
ASTM D1654 (Tables 1 & 2).

PVC Coating

product thoroughly. A bonding coat is
applied to the part and then preheated to
a temperature above the melting point of
the coating powder. The product is then
passed through a fluidized bed of vinyl
plastic powder where the powder
particles melt, adhere and flow out to
form a smooth continuous coating. The
thickness is controlled by the base metal
temperature and the immersion time in
the bed. It is then post-heated to complete
the fusion of the outer surfaces.
The standard coating thickness of
Cooper B-Line’s PVC coated products is
15 mils (.380 mm), plus or minus 5 mils
(.125 mm). Since the chemistry, not the
thickness of vinyl plastic PVC determines
longevity, a coating of 10 to 20 mils (.250
to .500 mm) is more than adequate. If the
corrosive conditions are such that the
plasticizers are leeched out, a thicker
coating will do little to extend the life of a
coated product.

Another of the corrosion resistant coatings
offered by Cooper B-Line is PVC
For certain environments, a plastisol
(polyvinyl chloride), applied over steel or dipped PVC coating is available on
aluminum channel and fittings. The PVC
request.
coating process begins by cleaning the
PVC coating depends totally on the
concept of encapsulation attached to the
SALT SPRAY TEST RESULTS
base metal by a bonding agent. If any
˛
Unscribed
Scribed 1/8” (3.2) Creepage
hole or discontinuity occurs, the corrosive
Type of Finish
5% Failure (1)
from Scribe (1)
action can undercut the base metal to a
point where all that remains is the PVC.
B-Line Dura-Green Epoxy
1000 Hours
312 Hours
The Dura-Green and Dura-Copper Epoxy
coatings have been tested and listed by
Underwriters Laboratories in accordance
with “Standard for Surface Metal Raceway
and Fittings, UL5” and “Standard for Pipe

Mill Galv. (Pre-Galv.) G90

192 Hours

288 Hours

Perma-Green

438 Hours

231 Hours

Zinc Chromate
Industry Green (Range)

36 Hours

96 Hours

10 to 36 Hours

4 to 30 Hours

(1) All salt spray (fog) tests conducted in accordance with ASTM B117 and evaluated and
rated according to ASTM D1654 Tables 1 & 2. Tests are performed and certified by an
independent testing laboratory.

In the event of field cuts or any other
damage to the coating, a liquid PVC
patch, available from Cooper B-Line, must
be applied to maintain the integrity of the
coating. After the installation is complete,
a thorough inspection should be performed to assure the absence of voids,
pinholes, or cuts.

DURA-GREEN™/DURA-COPPER™ EPOXY COATING PROCESS
TANK 1
The channel
and parts are
thoroughly
cleaned and
phosphatized.

TANK 2
A rinse is
applied to
remove
insoluble salts
and unreacted
phosphates.

TANK 3
A phosphatized
sealer is applied
to insure
corrosion
resistanceand
paint adhesion.

TANK 4
The material
moves through
clear water rinse
to remove excess
phosphates.

TANK 5
A pre-deionized
rinse prepares
the metal for the
cathodic electrocoating.

6

TANK 6
The electrocoating tank
applies a
uniform coat
of epoxy paint
to the entire
surface.

TANK 7
The first post
rinse removes
any unelectrically attracted
solids.

TANK 8
The final rinse
insures a
smooth,
nonblemish
surface.

BAKE OVEN
The curing
process takes 20
minutes at a
baking temperature
of 375° F (199° C).

Technical Data
WELDING
sequence, speed and duration are
carefully controlled and monitored by a
sophisticated electronic control system.
A statistical quality control program,
combining destructive and non-destructive
testing, is used by Cooper B-Line to
ensure high quality welds.

Spot Welding

MIG Welding

Spot welded back-to-back channel is
manufactured using a modern DC
powered resistance welder controlled by
a microprocessor. This produces a series
of spot welds with speed and consistency.
Consistency is one of the most important
advantages in specifying B-Line back-toback channel. Variables such as weld

MIG welded, more properly called gas
metal arc welded (GMAW) combination
channels and fittings, are produced when
physical dimensions or certain
combinations require a weld process
other than automatic spot welding. The
same quality control requirements are
imposed on MIG welded and spot-welded
products.

Spot Weld

MIG Weld

7

Quality Assurance
Cooper B-Line’s Quality Assurance
Program has been developed and
implemented for compliance with
ISO9001:2008. Cooper B-Line also
complies with various industry standards
and specifications. Cooper B-Line has
extensive experience in suppling metal
framing components for the nuclear
power generating industry, and upon
request can provide products in
compliance with 10CFR50 Appendix B,
NQA-1 and 10CFR21. For more
information on our quality capability
please visit www.cooperbline.com/nuclear.

Technical Data

The welding procedures used in the
fabrication of Cooper B-Line steel
products are in accordance with American
Welding Society Standards. To achieve
the highest quality in our manufacturing
processes, our welders follow standards
set by AWS Code.

Technical Data
CORROSION

GALVANIC SERIES IN SEA WATER

All metal surfaces are affected by
corrosion. Depending on the physical
properties of the metal and the
environment to which it is exposed,
chemical or electromechanical corrosion
may occur.

Anodic End

Atmospheric corrosion occurs when metal
is exposed to airborne liquids, solids or
gases. Some sources of atmospheric
corrosion are moisture, salt, dirt and
sulphuric acid. This form of corrosion is
typically more severe outdoors, especially
near marine environments.

Chemical Corrosion
Chemical corrosion takes place when
metal comes in direct contact with a
corrosive solution. Some factors which
affect the severity of chemical corrosion
include: chemical concentration level,
duration of contact, frequency of washing,
and operating temperature.

Storage Corrosion
Wet storage stain (white rust) is caused
by the entrapment of moisture between
surfaces of closely packed and poorly
ventilated material for an extended period.
Wet storage stain is usually superficial,
having no affect on the properties of the
metal.

More Anodic

Technical Data

Atmospheric Corrosion

Magnesium
Magnesium Alloys
Zinc
Beryllium
Aluminum - Zinc Alloys (7000 series)
Aluminum - Magnesium Alloys (5000 series)
Aluminum (1000 series)
Aluminum - Magnesium Alloys (3000 series)
Aluminum - Magnesium - Silicon Alloys (6000 series)
Cadmium
Aluminum - Copper Alloys (2000 series)
Cast Iron, Wrought Iron, Mild Steel
Austenitic Nickel Cast Iron
Type 410 Stainless Steel (active)
Type 316 Stainless Steel (active)
Type 304 Stainless Steel (active)
Naval Brass, Yellow Brass, Red Brass
Tin
Copper
Lead-Tin Solders
Admiralty Brass, Aluminum Brass
Manganese Bronze
Silicon Bronze
Tin Bronze
Type 410 Stainless Steel (passive)
Nickel - Silver
Copper Nickel Alloys
Lead
Nickel - Aluminum Bronze
Silver Solder
Nickel 200
Silver
Type 316 Stainless Steel (passive)
Type 304 Stainless Steel (passive)
Incoloy 825
Hastelloy B
Titanium
Hastelloy C
Platinum
Graphite

Light staining normally disappears with
weathering. Medium to heavy buildup
should be removed in order to allow the
formation of normal protective film. Proper
handling and storage will help to assure
stain-free material. If product arrives wet,
it should be unpacked and dried before
storage. Dry material should be stored in
a well ventilated “low moisture”
environment to avoid condensation
formation. Outdoor storage is
Cathodic End
undesirable, and should be avoided
whenever possible.
Metals in descending order of activity in the presence of an electrolyte.

Galvanic Corrosion
Galvanic corrosion occurs when two or
more dissimilar metals are in contact in
the presence of an electrolyte (ie.
moisture). An electrolytic cell is created
and the metals form an anode or a
cathode depending on their relative
position on the Galvanic Series Table.
The anodic material will be the one to
corrode. Anodic or cathodic characteristics
of two dissimilar metals will depend on the
type of each material. For example: If
zinc and steel are in contact, the zinc acts
as the anode and will corrode; the steel
acts as the cathode, and will be protected.
If steel and copper are in contact, the

steel is now the anode and will corrode.
The rate at which galvanic corrosion
occurs depends on several factors:
1. The relative position on the Galvanic
Series Table - the further apart materials
are in the Galvanic Series Table, the
greater the potential for corrosion of the
anodic material.
2. The amount and concentration of
electrolyte present - an indoor, dry
environment will have little or no galvanic
corrosion compared to a wet atmosphere.

8

3. The relative size of the materials - a
small amount of anodic material in contact
with a large cathodic material will result in
greater corrosion. Likewise, a large
anode in contact with a small cathode will
decrease the rate of attack.

Technical Data
Aluminum
R
R
R
R
F
R
R
NR
R
R
F
R
–
R
R
R
F
R
R
R
F
NR
NR
NR
R
R
R
R
F
R
R
R
R
R
R
R
R
F
R
–
R
F
NR
NR
NR
F
NR
NR
NR
F
F
F
R
F
R
F
R
R

Dura-Green
NR
F
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
NR
F
F
NR
R
R
R
R
R
F
R
R
R
R
R
R
NR
R
R
R
NR
R
R
R
R
R
R
R
R
R
NR
R
R
R
F
R
R

PVC
R
R
NR
R
R
R
NR
R
R
NR
F
R
–
NR
R
NR
NR
R
R
R
R
R
–
–
R
–
R
R
R
–
R
R
NR
NR
–
R
R
R
–
–
NR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
NR

Type 304
Stainless
R
R
R
R
R
R
R
NR
R
R
R
NR
–
–
R
–
–
R
R
R
R
NR
NR
NR
R
R
F
R
NR
R
R
R
–
–
–
R
R
R
–
R
R
R
R
R
R
R
R
R
–
–
NR
NR
–
R
R
R
F
–

Type 316
Stainless
R
R
R
R
R
R
R
NR
R
R
R
F
–
–
R
–
–
R
R
R
R
NR
NR
NR
R
R
R
R
–
R
R
R
–
–
–
R
R
R
–
R
R
R
R
R
R
R
R
R
–
–
R
R
–
R
R
R
F
–

Zinc
Coated Steel
NR
NR
R
–
–
–
–
–
R
–
–
R
–
NR
R
R
R
R
R
R
–
NR
NR
NR
–
–
–
–
–
NR
–
R
R
R
–
R
R
–
NR
R
R
NR
–
–
–
F
NR
F
–
–
–
NR
–
–
F
F
R
–

Fiberglass corrosion chart on page 183.
The corrosion data given in this table is for general comparison only.
The presence of contaminates and the effect of temperature in chemical environments can greatly affect the corrosion of any material.
B-Line strongly suggests that field service tests or simulated laboratory tests using actual environmental conditions be conducted in order
to determine the proper materials and finishes to be selected.
R=Recommended
F=May be used under some conditions
NR=Not Recommended
–Information not available

9

Technical Data

Chemical
Acetic Acid 10%
Acetic Acid 2%
Acetone
Ammonium Hydroxide-Conc.
Ammonium Hydroxide 10%
Ammonium Hydroxide 2%
Benzene
Bromine Water
Butanol (Butyl Alcohol)
Carbon Disulfide
Carbon Tetrachloride
Chlorine Water
Cutting Oil
Diethanolamine
Ethanol
Ethyl Acetate
Ethylene Dichloride
Formaldehyde 20%
Gasoline
Glycerine
Household Detergent 10%
Hydrochloric Acid 40%
Hydrochloric Acid 10%
Hydrochloric Acid 2%
Hydrogen Peroxide 30%
Hydrogen Peroxide 3%
Hydrogen Sulfide (Gas)
JP-4 Jet Fuel
Lactic Acid 85%
Latex
Linseed Oil Fatty Acid
Methanol
Methyl Ethyl Ketone
Methyl Isobutyl Ketone
Mineral Spirits
Motor Oil-10W
Naphtha, VM&P
Nitric Acid 2%
Perchloroethylene
Petroleum Ether
Phenol 10%
Phosphoric Acid 2%
Potassium Hydroxide 50%
Potassium Hydroxide 10%
Potassium Hydroxide 2%
Sodium Chloride 25%
Sodium Hydroxide 50%
Sodium Hydroxide 10%
Sodium Hydroxide 2%
Sodium Hypochlorite-C1. 10%
Sodium Hypochlorite-C1. 6%
Sulfuric Acid 2%
Tall Oil Fatty Acid (Syfate 94)
Tannic Acid 50%
Water-Deionized
Water-Sea
Water-Tap
Xyol

Technical Data
DESIGN OF
STRUT SYSTEMS
Beams
Beams are usually defined as horizontal
members which are subjected to vertical
loads such as shelves, platforms or
supports for pipes, conduits or cable
trays. The following is a brief overview of
common beam configurations:

Cantilever Beam

Deflection

Cantilever beams are often viewed as
variations of a fixed beam, but they have
special characteristics of their own. One
end of the channel is firmly attached to a
rigid support while the other end remains
completely free.

Deflection, commonly referred to as “sag”,
is inherent in applying a load to a beam
and cannot be avoided. Any and all
beams will deflect when loaded. The
amount of deflection will vary depending
upon the material and the stiffness or
moment of inertia. The deflection
equations in this section show that
increasing the stiffness can be increased
by a variety of methods. Increasing the
depth of the channel is the most direct
method.

A shelf bracket is an example of a
cantilever beam.

Technical Data

Simple Beam
An example of a simple beam is a length
of channel placed across two cylinders.
When a load is applied, the channel will
support the load because of its stiffness.
The cylinders serve to support the
channel, but do not interfere with its
natural tendency to flex or bend. Simple
beam analysis is used almost universally
for beam comparisons, even though it is
seldom practical in field installations.
A cable tray or conduit trapeze hanger
closely resembles a simple beam.
Point Load

Point Load

Continuous Beam
This beam configuration is commonly
used in lighting installations. The
continuous beam possesses traits of
both the simple and fixed beams. When
equal loads are applied to all spans
simultaneously, the counter-balancing
effect of the loads on both sides of a
support restricts the movement of the
channel at the support, similar to that of
the fixed beam. The end spans behave
substantially like simple beams.

Fixed Beam
This type of fixed support restricts the
movement of the ends of the channel
when a load is applied. Because of this,
the stiffness of the channel at the ends
and center is employed to resist the load.
The result is a load capability which is
greater than that of an identical simple
beam.
The fixed beam can be approximated by
bolting or welding a length of channel to
rigid supports.

Continuous beam installations can
typically support 20% more load than a
simple beam of the same span with
approximately half the deflection.
Therefore, simple beam data should be
used for a general comparison only. An
example of this configuration is found in a
long run of channel when installed across
several supports to form a number of
spans.

10

The material used affects deflection in a
manner which is significantly different
from the way in which it affects load
capacity. The deflection under load is
inversely proportional to a material
property known as the “modulus of
elasticity” designated by “E”.
The modulus of elasticity is dependent
upon the basic composition of the material
and is not necessarily related to the
material’s strength.

Technical Data
Safety Factor
The design loads given for strut beam
loads are based on a simple beam
condition using allowable stress of 25,000
psi. This allowable stress results in a
safety factor of 1.68. This is based upon a
virgin steel minimum yield strength of
33,000 psi cold worked during rolling to
an average yield stress of 42,000 psi.

support and bracing inherently. Piping,
tubing, cable trays, or conduits mounted
to the strut with straps and clamps
prevent twisting or lateral movement. If
no such lateral support exists, contact the
factory for loading recommendations.

Columns

Twisting & Lateral Bracing
Loading of strut on long spans can cause
torsional stress, resulting in the tendency
of the strut to twist or bend laterally. This
phenomenon reduces the allowable beam
loads as shown in the beam loading
charts. It is recommended that long spans
be supported in a manner to prevent
twisting (fixed ends), and that the channel
have adequate lateral bracing. Many
typical strut applications provide this

K = .8 pinned top - fixed bottom
K = .65 fixed top - fixed bottom
K = 1.0 pinned top - pinned bottom
K = 1.2 free top - fixed bottom
There are a number of physical properties
which are important to the complete
design of a channel member; the “section
modulus” designated as “Sx” or “Sy”,
“moment of inertia” designated by “Ix” or
“Iy”, and the “radius of gyration” which is
given as “rx” or “ry”.

11

When evaluating channel under various
beam conditions, it is often more
convenient to compare in terms of the
ultimate or recommended “bending
moment”. Simple equations show the
stress is directly proportional to the
bending moment.
Therefore, comparing bending moments
can save time in repeated calculations.
The chart containing Formulas on
Common Beam Loadings (following page)
shows how to calculate the bending
moment for various configurations and
load conditions. It should be noted that
the bending moment is usually not
constant, but varies along the length of
the span. However, the channel must be
designed for a single point, which is the
point of maximum bending moment.
For information regarding dynamic or
seismic design, contact Cooper B-Line’s
Home Office.

GENERAL INFORMATION
Torque
The torque values given throughout the
catalog are to be used as a guide only.
The relationship between the applied
torque or torque wrench reading and the
actual tension created in the bolt may be
substantially different. For example, a dry
non-lubricated bolt with a heavy plating
may rate 50% as efficient as a bolt which
is lubricated with a mixture of heavy oil
and graphite. Other important factors
affecting torque-tension relationships
include friction under the bolt head or nut,
hole tolerances, and torque wrench
tolerances. Accuracy of many commercial
torque wrenches may vary as much as
plus or minus 25%.

Charts and Tables
Charts and tables in this section are
compiled from information published by
nationally recognized organizations and
are intended for use as a guide only.
Cooper B-Line recommends that users of
this information determine the validity of
such information as applied to their own
application.

Technical Data

Columns are vertical members which
carry loads in compression. One common
Aluminum typically has an elastic modulus example of a channel column is the
which is 1/3 that of steel even though they vertical members of a storage rack.
may have identical strength. As a result,
In theory, a column will carry a load equal
the deflection of aluminum channel will
be three times that of steel channel under to its cross sectional area multiplied by
the ultimate compressive stress of the
equal loading. In areas where structures
material of which the column is made. In
will be subject to general viewing,
reality, there are many factors affecting
deflection can produce a displeasing
the load capacity of a column, such as the
effect. To the untrained eye, a sagging
tendency to buckle or twist laterally
channel may appear to be a result of
(torsional-flexural buckling), the type of
poor design or excessive loading. This is
connection at the top or bottom, the
not usually the case. Many properly
eccentricity of the load application, and
designed channel installations will show
material imperfections. Several of these
a noticeable deflection at their designed
failure modes have been considered in
loads. In areas where cosmetics are not
the allowable column load tables shown in
important, deflection should not be a
the “Channel” section of this catalog.
factor. Designing an entire installation
based on minimal deflection could result
Cooper B-Line strongly recommends that
in an over designed structure. This
the engineer perform a detailed study of
translates into increased material and
the many variable conditions before the
installation cost. Where cosmetics are
important, it may be necessary to limit the selection process begins.
deflection to an aesthetically pleasing
Design Factors to be Considered
amount. This “acceptable deflection”
The loading capacity of channel depends
amount is typically given as a fraction
primarily on the material, its crossof the span. 1/240 span deflection is
sectional design, and the beam or column
typically the limit where the amount of
loading configuration. It should be noted
deflection appears negligible. For
that if two lengths of channel have
example, a beam span of 240” would be
identical designs and configurations, the
allowed 1” (240/240) of deflection at the
one made of the stronger base material
mid point. A 120” span would only be
will support a larger load. Therefore, any
allowed 1/2” (120/240) of deflection. The
comparison of channel should begin by
maximum load for the channel must be
determining whether the materials are
limited in order to remain under these
approximately equal in strength.
deflection requirements. The allowable
load resulting in 1/240 span deflection is
The column loading chart for each
posted in the beam load chart for each
channel lists the allowable load for each
channel size.
channel in compression. This load varies
For even more stringent deflection
depending on the support condition or “Krequirements, an allowable load is listed
factor”.
in the beam load charts which results in
Several “K-factors” are listed, which
1/360 span deflection. This amount of
deflection is sometimes used for beams in correspond to the following support
conditions:
finished ceilings that are to be plastered.

Every structural material has its own
maximum or ultimate stress, which is
usually expressed in “pounds per square
inch” (pascals). Any load which causes a
member to fail is referred to as its
“ultimate” load. In order to prevent
channel from being accidentally loaded up
to or beyond its ultimate load, a safety
factor is included into the design. The
ultimate load is divided by the safety
factor to obtain the “recommended” or
“allowable” working load.

Technical Data
The data shown in the beam load charts for appropriate channels on page(s) 16 thru 37 is for simply supported, single span beams
with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart below.

Load
Factor

LOAD AND SUPPORT CONDITION
Simple Beam - Uniform Load

Deflection
Factor

1.00

1.00

.50

.80

Simple Beam - Two Equal Concentrated Loads at 1/4 Points

1.00

1.10

Beam Fixed at Both Ends - Uniform Load

1.50

.30

Beam Fixed at Both Ends - Concentrated Load at Center

1.00

.40

Cantilever Beam - Uniform Load

.25

2.40

Cantilever Beam - Concentrated Load at End

.12

3.20

1.30

.92

1.00

.42

Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span

.62

.71

Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans

.67

.48

Span

Technical Data

Simple Beam - Concentrated Load at Center

Continuous Beam - Two Equal Spans - Uniform Load on One Span
Span

Span

Continuous Beam - Two Equal Spans - Concentrated Load on Both Spans

EXAMPLES:
PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a simply supported B22 beam with a concentrated
load at midspan as shown.

PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a cantilever B52 beam with a uniformly distributed
load.

96”
SOLUTION:
From beam load chart for B22 (page 22), maximum allowable
Load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in the chart above.

SOLUTION:
From beam load chart for B52 (page 33), maximum allowable
load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in chart above.

LOAD = A x load factor = _______
DEFLECTION = B x deflection factor =

LOAD = A x load factor = _______
DEFLECTION = B x deflection factor = _______

12

Technical Data
RECOMMENDED BOLTED METAL FRAMING SPECIFICATION
Brackets [ ] indicate alternative
specifications which may be substituted by
the project engineer.
PART 1 - GENERAL
1.01 WORK INCLUDED
A. Continuous slot, bolted framing channels
and all associated fittings and hardware.
B. Trapeze type supports for cable tray,
conduit, pipe and other similar systems.
C. Use of bolted metal framing as a surface
metal raceway.

B. ASTM A123 - Specification for Zinc
(hot-dip galvanized) Coatings on Products
Fabricated from Rolled, Pressed, and
Forged Steel Shapes, Plates, Bars and
Strips.
C. ASTM A1011, 33,000 PSI min. yield Specification for Steel, Sheet and Strip,
Carbon, Hot-Rolled, Structural Quality.
D. ASTM B633 - Specification for
Electrodeposited Coatings of Zinc on Iron
and Steel.
E. ASTM A653 33,000 PSI min. yield G90
- Specification for Steel Sheet, Zinc Coated
(Galvanized) by the Hot-Dip Process,
Structural Quality.

F. UL Compliance: Comply with UL
“Standard for Surface Metal Raceway and
Fittings”.
1.04 SUBMITTALS
A. Submit drawings of strut and
accessories including clamps, brackets,
hanger rods and fittings.
B. Submit manufacturer’s product data on
strut channels including, but not limited to,
types, materials, finishes, gauge thickness
and hole patterns. For each different strut
cross section, submit cross sectional
properties including Section Modulus (Sx)
and Moment of Inertia (Ix).
1.05 DELIVERY, STORAGE AND
HANDLING
A. Deliver strut systems and components
carefully to avoid breakage, denting, and
scoring finishes. Do not install damaged
equipment.
B. Store strut systems and components in
original cartons and in clean dry space;
protect from weather and construction
traffic.

PART 2 - PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance
F. ASTM A1018 - Standard Specification
for Steel, Sheet and Strip, Heavy-Thickness with these specifications, strut systems to
be installed shall be as manufactured by
Coils, Carbon, Hot-Rolled, Structural
Cooper B-Line Systems, Inc. [or engineer
Quality.
approved equal.]
G. MFMA - Metal Framing Standards
Publication, MFMA-4.
2.02 STRUT CHANNELS AND
COMPONENTS
1.03 QUALITY ASSURANCE
A. General: Strut shall be 15/8” wide in
A. Manufacturers : Firms regularly engaged
varying heights and welded combinations
in the manufacture of bolted metal framing
as required to meet load capacities and
of the types required, whose products have designs indicated on the drawings.
been in satisfactory use in similar service
for not less than 5 years.
B. Material and Finish: Material and finish
specifications for each strut type are as
B. A material heat code number shall be
follows:
stamped on all strut and fittings. This is
required to maintain traceability of the
product to the material test reports to the
ASTM standard.
C. For stainless steel items, the part
number shall contain a material designator
(EXAMPLE: B-Line B22SS6 for type 316 or
B22SS4 for type 304), or a separate stamp
shall be included to reference the type of
material used.
D. MFMA Compliance: comply with the
latest revision of MFMA Standard
Publication Number MFMA-4, “Metal
Framing”.

1. Aluminum: Strut shall be manufactured
of extruded aluminum alloy 6063-T6. All
fittings and hardware shall be zinc plated
according to ASTM B633. For outdoor use,
all fittings and hardware shall be stainless
steel Type 316 [Type 304] or chromium
zinc, ASTM F1136 Gr. 3.
2. Epoxy Painted: Strut shall be made from
steel meeting the minimum mechanical
properties of ASTM A1011 33,000 PSI min
yield, then painted with water born epoxy
applied by a cathodic electro-deposition

13

process. Fittings shall be manufactured
from steel meeting the minimum
requirements of ASTM A1018 33,000 PSI
min. yield. The fittings shall have the same
epoxy finish as the strut. Threaded
hardware shall be zinc plated in accordance
with ASTM B633 Service Class 1 (SC1).
Service Class 1 is not an acceptable
coating for fittings or components other than
threaded hardware.
3. Pre-Galvanized Steel: Strut shall be
made from structural quality steel meeting
the minimum mechanical properties of
ASTM A653 33,000 PSI min. yield, mill
galvanized coating designation G90.
Fittings shall be manufactured from steel
meeting the minimum requirements of
ASTM A1018 33,000 PSI min. yield and
zinc plated in accordance with ASTM B633
service class 3 (SC3). Threaded hardware
shall be zinc plated in accordance with
ASTM B633 Service Class 1 (SC1). Service
Class 1 is not an acceptable coating for
fittings or components other than threaded
hardware.
4. Hot-Dip Galvanized Steel: Strut shall be
made from structural quality steel meeting
the minimum mechanical properties of
ASTM A1011 33,000 PSI min. yield and
shall be hot-dip galvanized after fabrication
in accordance with ASTM A123. Fittings
shall be manufactured from steel meeting
the minimum requirements of ASTM A1018
33,000 PSI min. yield, and hot-dip
galvanized after fabrication in accordance
with ASTM A123. All hardware shall be
stainless steel Type 316 [Type 304] or
chromium zinc ASTM F1136 Gr. 3. All hotdip galvanized after fabrication products
must be returned to point of manufacture
after coating for inspection and removal of
all sharp burrs.
5. Stainless Steel: All strut, fittings and
hardware shall be made of AISI Type 316
[Type 304] stainless steel as indicated.
Channels must be identified as required in
previous section 1.03 Quality Assurance.
PART 3 - EXECUTION
3.01 INSTALLATION
A. Install strut as indicated; in accordance
with equipment manufacturer’s
recommendations, and with recognized
industry practices.
B. All nuts and bolts shall be tightened to
the following values.
Bolt Size
1/4-20
5/16-18
3/8-16
1/2-13

Torque (ft-lbs)
6
11
19
50

Technical Data

1.02 REFERENCES
A. ASTM A108 - Specification for Steel
Bars, Carbon, Cold Finished, Structural
Quality.

E. NEC Compliance: Comply with the
latest revision NFPA 70 - Article 352
“Surface Metal Raceways and Surface
Nonmetallic Raceways”.

Metal Framing Channels
Channel
Cooper B-Line’s metal framing channel is cold formed
on our modern rolling mills from 12 Ga. (2.6mm),
14 Ga. (1.9mm), and 16 Ga. (1.5mm) low carbon steel
strips. A continuous slot with inturned lips provides
the ability to make attachments at any point.

Lengths & Tolerances
All channels excluding ‘SH’ style
± 1/8” (3.2mm) on 10’ (3.05m) and
± 3/16” (4.76mm) on 20’ (6.09m)
All ‘SH’ channels only
± 1/4” (6.35mm) on 10’ (3.05m) and
± 1/2” (12.70mm) on 20’ (6.09m)
Custom lengths are available upon request.

Slots
Cooper B-Line’s slotted series of channels offer full
flexibility. A variety of pre-punched slot patterns
eliminate the need for precise field measuring for
hole locations. Slots offer wide adjustments in the
alignment and bolt sizing.

Channel & Combinations

Holes

A variety of pre-punched 9/16” (14.3 mm) diameter hole
patterns are available in Cooper B-Line channels.
These hole patterns provide an economical
alternative to costly field drilling required for many
applications.

Knockouts
When used with series B217-20 Closure Strips,
Cooper B-Line’s knockout channels can be used to
provide an economical U.L. listed surface raceway.
Channels are furnished with 7/8” (22.2 mm) knockouts
on 6” (152 mm) centers, allowing for perfect fixture
alignment on spans up to 20’ (6.09 m).

Materials & Finishes (Unless otherwise noted)
Steel: Plain & Pre-galvanized
12 Ga. (2.6), 14 Ga. (1.9) and 16 Ga. (1.5)
Finish
Code
PLN

Finish
Plain

GRN
GLV

Dura-Green
Pre-Galvanized

HDG
YZN
SS4
SS6
AL

Hot-Dipped Galvanized
Yellow Zinc Chromate
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum

Specification
ASTM A1011, 33,000 PSI
min. yield
ASTM A653 33,000 PSI
min. yield
ASTM A123
ASTM B633 SC3 Type II
ASTM A240
ASTM A240
Aluminum 6063-T6

Note: A minimum order may apply on special material and finishes.

Design Load (Steel & Stainless Steel)
The design loads given for strut beam loads are based on a simple beam condition using an allowable stress of
25,000 psi. This allowable stress results in a safety factor of 1.68. This is based upon virgin steel minimum yield
strength of 33,000 psi cold worked during rolling to an average yield stress of 42,000 psi.
For aluminum channel loading multiple steel loading by a factor of 0.38.

Welding

Weld spacing is maintained between 21/2 inches (63.5 mm) and 4 inches (101.6 mm) on center. Through high
quality control testing of welded channels and continuous monitoring of welding equipment, Cooper B-Line
provides the most consistent combination channels available today.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
14

Channel
SELECTION CHART
for Channels, Materials and Hole Patterns
Channel Hole Pattern **

Material & Thickness *
Channel
Dimensions
Channel
Type

Height

Stainless
Steel

Width
Steel Alum.

1
31/4”
27/16”
15/8”
15/8”
15/8”
13/8”
1”
13/16”
13/16”
13/16”
13/16”
13/32”

(82.5)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
(20.6)
(10.3)

15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
13/16”
13/16”

(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(20.6)
(20.6)

12
12
12
14
16
12
12
12
14
16
18
18

Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.

Type
316

3

4

2
.105
.105
.105
.080
–
–
–
–
.080
–
–
–

S

H17/8

TH

13/32” x 3”

9/16”

9/16”

7/8”

slots on
2” centers

slots

diameter
holes

diameter
on 17/8”
centers

diameter
knockouts

1
1

1
12
123
123
1
13
13
1
1234
1
–
–

–
–
1
–
–
–
–
–
–
–
–
–

1
12
12
12
1
1
1
1
12
1
–
–

–
–
1
–
–
12
12 Ga. 12 Ga. 1 2 3 4
14 Ga. 14 Ga. 1 2 3 4
–
–
1
12 Ga.
–
13
12 Ga.
–
13
12 Ga.
–
1
14 Ga. 14 Ga. 1 2 3 4
–
–
1
–
–
–
–
–
–

1 3
1
1
1
1
1
1
1
–
–

KO6

The selection has been prepared to provide a reference for available channel, materials and hole patterns. Material types
available for various hole patterns are defined by numbers 1 thru 4.
Some stainless steel channels with hole patterns are available on special order only.
*Metric equivalent for thicknesses shown in chart.
12 Ga. = 2.6 mm
18 Ga. = 1.2 mm
14 Ga. = 1.9 mm
.105 = 2.6 mm
16 Ga. = 1.5 mm
.080 = 2.0 mm

**1 - Steel
2 - Aluminum
3 - Type 304 Stainless Steel
4 - Type 316 Stainless Steel

Properties may vary due to commercial tolerances of the material.

Channel Part Numbering
Example:
B22 SH - 120 SS4
Channel Type
B11
B12
B22 †
B24 †
B26
B32
B42
B52 †
B54 †
B56
B62
B72

Hole Patterns
Length
Material/Finish
SH (pg. 40)
GRN
120
S (pg. 40)
240
GLV
H178 (pg. 40)
HDG
TH (pg. 41)
YZN
K06 (pg. 41)
SS4
SHA (pg. 41)
SS6
S58 (pg. 42)
AL
M (pg. 42)
H25 (pg. 43)
H112 † (pg. 42)
* Leave blank for no hole pattern

Reference page 14 for general fitting and standard finish specifications.

15

Channel & Combinations

B11
B12
B22
B24
B26
B32
B42
B52
B54
B56
B62
B72

Type
304

SH
9/16” x 11/8”

B11 Channel, Combinations & Load Data
B11
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Aluminum
• Weight: 3.05 Lbs./Ft. (4.54 kg/m)

15/8”
(41.3)

3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

9/32”
(7.1)

Y
31/4”
(82.5)

X

X
1.5190
(38.6)

13/16”

Y

(20.6)

X - X Axis

SECTION PROPERTIES

Channel & Combinations

Channel
B11
B11A

Weight
lbs./ft.

kg/m

3.059
6.119

(4.55)

Areas of
Section
sq. in. cm2

Moment of
Inertia (I)
in.4

cm4

Section
Modulus (S)
in.3

Y - Y Axis
Radius of
Gyration (r)

cm3

in.

cm

.900 (5.81) 1.1203 (46.63) .6472 (10.61) 1.116
(9.11) 1.800 (11.61) 6.3931 (266.10) 1.9671 (32.24) 1.885

(2.83)
(4.79)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

cm3

Radius of
Gyration (r)
in.

cm

.4357 (18.14) .5362 (8.79) .696
.8714 (36.27) 1.0725 (17.58) .696

(1.77)
(1.77)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

BEAM LOADING
Beam Span
In.

mm

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

144

(3657)

168

(4267)

192

(4877)

216

(5486)

240

(6096)

Channel

Uniform Load and Deflection

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A

5130
5130*
3488
5130*
2616
5130*
2093
5130*
1744
5130*
1495
4552
1308
3983
1163
3541
1046
3187
872
2656
747
2276
654
1992
581
1770
523
1593

(22819)
(22819)
(15515)
(22819)
(11636)
(22819)
(9310)
(22819)
(7757)
(22819)
(6650)
(20248)
(5818)
(17717)
(5173)
(15751)
(4653)
(14176)
(3879)
(11814)
(3323)
(10124)
(2909)
(8861)
(2584)
(7873)
(2326)
(7086)

.029
.005
.065
.017
.117
.040
.183
.079
.263
.136
.358
.191
.468
.250
.592
.317
.731
.391
1.053
.563
1.433
.766
1.871
1.001
2.368
1.267
2.924
1.564

(.73)
(.13)
(1.65)
(.43)
(2.97)
(1.01)
(4.65)
(2.00)
(6.68)
(3.45)
(9.09)
(4.85)
(11.89)
(6.35)
(15.03)
(8.05)
(18.57)
(9.93)
(26.74)
(14.30)
(36.40)
(19.45)
(47.52)
(25.42)
(60.15)
(32.18)
(74.27)
(39.72)

5130
5130*
3488
5130*
2616
5130*
2093
5130*
1744
5130*
1460
4552
1118
3983
884
3541
716
3187
497
2656
365
2078
280
1591
221
1257
179
1018

(22819)
(22819)
(15515)
(22819)
(11636)
(22819)
(9310)
(22819)
(7757)
(22819)
(6494)
(20248)
(4973)
(17717)
(3932)
(15751)
(3185)
(14176)
(2211)
(11814)
(1623)
(9243)
(1245)
(7077)
(983)
(5591)
(796)
(4528)

5130
5130*
3488
5130*
2616
5130*
1908
5130*
1325
5130*
974
4552
745
3983
589
3353
477
2716
331
1886
243
1386
186
1061
147
838
119
679

(22819)
(22819)
(15515)
(22819)
(11636)
(22819)
(8487)
(22819)
(5894)
(22819)
(4332)
(20248)
(3314)
(17717)
(2620)
(14915)
(2122)
(12081)
(1472)
(8389)
(1081)
(6165)
(827)
(4719)
(654)
(3727)
(529)
(3020)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

Reference page 14 for general fitting and standard finish specifications.

16

B11 Beam & Column Loading Data

Y
31/4”
(82.5)
61/2”
(165.1)

Y

X
X

X
15/8”
(41.3)

X
Y

Y

13/16”
(20.6)

31/4”
(82.5)

1.5190
(38.6)

B11B

Wt. 6.10 Lbs./Ft. (9.08 kg/m)

Wt. 6.10 Lbs./Ft. (9.08 kg/m)

COLUMN LOADING
Unbraced
Height
In.

Channel
Style

mm

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

144

(3657)

168

(4267)

192

(4877)

216

(5486)

240

(6096)

B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

8190
17701
7311
17416
6214
17016
4988
16503
3816
15876
3063
15135
2564
14279
2213
13310
1953
12226
1591
9717
1347
7183
1167**
5499**
1026**
4345**
910**
3520**

(36431)
(78738)
(32521)
(77470)
(27641)
(75691)
(22188)
(73409)
(16974)
(70620)
(13625)
(67324)
(11405)
(63516)
(9844)
(59206)
(8687)
(54384)
(7077)
(43223)
(5992)
(31951)
(5191)
(24461)
(4564)
(19327)
(4048)
(15658)

4477
8267
4183
8189
3783
8079
3279
7727
2444
6160
1897
4961
1532
4045
1273
3337
1081
2784
816
1990
642
1464
519
1121
429
885
360
717

(19914)
(36773)
(18607)
(36426)
(16827)
(35937)
(14586)
(34371)
(10871)
(27401)
(8438)
(22067)
(6814)
(7993)
(5662)
(14844)
(4808)
(12384)
(3630)
(8852)
(2856)
(6512)
(2308)
(4986)
(1908)
(3936)
(1601)
(3189)

8446
17778
7838
17590
7053
17327
6140
16988
5146
16574
4133
16084
3398
15520
2886
14880
2514
14164
2011
12508
1687
10550
1459
8330
1285**
6582**
1148**
5331**

(37569)
(79080)
(34865)
(78244)
(31373)
(77074)
(27312)
(75566)
(22890)
(73724)
(18384)
(71545)
(15115)
(69036)
(12837)
(66189)
(11183)
(63004)
(8945)
(55638)
(7504)
(46929)
(6490)
(37053)
(5716)
(29278)
(5106)
(23713)

7783
17572
6503
17127
4988
16503
3595
15701
2790
14721
2291
13563
1953
12226
1708
10712
1522
9019
1251**
6257**
1058**
4597**
910**
3520**
–
–
–
–

(34620)
(78164)
(28927)
(76184)
(22188)
(73409)
(15991)
(69841)
(12410)
(65482)
(10191)
(60331)
(8687)
(54384)
(7597)
(47649)
(6770)
(40118)
(5565)
(27832)
(4706)
(20448)
(4048)
(15658)

7311
17416
5612
16774
3816
15876
2790
14721
2213
13310
1846
11642
1591
9717
1401
7725
1251**
6257**
1026**
4345**
859**
3192**
–
–
–
–
–
–

(32521)
(77470)
(24963)
(74614)
(16974)
(70620)
(12410)
(65478)
(9844)
(59206)
(8211)
(51786)
(7077)
(43223)
(6232)
(34362)
(5565)
(27832)
(4564)
(19327)
(3821)
(14199)

–
–
–
–

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

17

–
–
–
–
–
–

Channel & Combinations

15/8”
(41.3)

B11A

31/4”
(82.5)

B12 Channel & Combinations
B12
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Aluminum
• Weight: 2.47 Lbs./Ft. (3.67 kg/m)

15/8”
(41.3)

3/8”
(9.5)

3/8”
(9.5)
9/32”

7/8”
(22.2)

(7.1)

Y
27/16”
(61.9)

X

X
1.1197
(28.4)

Y

Channel & Combinations

13/16”
(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B12
B12A

Areas of
Section

Weight
lbs./ft.

kg/m

2.484
4.969

(3.70)

Moment of
Inertia (I)

sq. in. cm2

in.4

cm4

Section
Modulus (S)
in.3

cm3

Y - Y Axis
Radius of
Gyration (r)
in.

.731 (4.71) .5349 (22.26) .4061 (6.65) .856
(7.40) 1.462 (9.43) 2.9036 (120.86) 1.1915 (19.52) 1.409

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm
(2.17)
(3.58)

cm4

in.3

Radius of
Gyration (r)

cm3

.3377 (14.06) .4156 (6.81)
.6756 (28.12) .8315 (13.63)

in.

cm

.680
.680

(1.73)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y

27/16”
(61.9)

X

Y

47/8”
(123.8)

X

X
15/8”
(41.3)

X
Y

Y

13/16”
(20.6)

1.1199
(28.4)

15/8”
(41.3)

27/16”
(61.9)

B12A

B12B

Wt. 4.94 Lbs./Ft. (7.35 kg/m)

Wt. 4.94 Lbs./Ft. (7.35 kg/m)

Reference page 14 for general fitting and standard finish specifications.

18

31/4”
(82.5)

(1.73)

B12 Beam & Column Loading Data
BEAM LOADING
Beam Span
mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A

3880
3880*
3273
3880*
2182
3880*
1636
3880*
1309
3847*
1091
3206
935
2748
818
2404
727
2137
655
1924

(17259)
(17259)

.009
.001
.038
.008
.086
.028
.153
.067
.240
.130
.345
.188
.470
.255
.614
.334
.777
.422
.959
.521

(.23)
(.02)

3880
3880*
3273
3880*
2182
3880*
1636
3880*
1309
3847*
947
3206
696
2748
533
2404
421
2137
341
1844

(17259)
(17259)

3880
3880*
3273
3880*
2182
3880*
1421
3880*
909
3847*
632
3206
464
2509
355
1921
281
1518
227
1229

(17259)
(17259)

(14559)
(17259)
(9706)
(17259)
(7277)
(17259)
(5823)
(17112)
(4853)
(14261)
(4159)
(12224)
(3638)
(10693)
(3234)
(9506)
(2913)
(8558)

(.96)
(.20)
(2.18)
(.71)
(3.88)
(1.70)
(6.09)
(3.30)
(8.76)
(4.77)
(11.94)
(6.48)
(15.59)
(8.48)
(19.73)
(10.72)
(24.36)
(13.23)

(14559)
(17259)
(9706)
(17259)
(7277)
(17259)
(5823)
(17112)
(4212)
(14261)
(3096)
(12224)
(2371)
(10693)
(1873)
(9506)
(1517)
(8202)

(14559)
(17259)
(9706)
(17259)
(6321)
(17259)
(4043)
(17112)
(2811)
(14261)
(2064)
(11160)
(1579)
(8545)
(1250)
(6752)
(1010)
(5467)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.
mm
12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Channel
Style
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face
Lbs.
N
Lbs.
N
10140
20820
9244
20519
7933
20017
6386
19315
4785
18412
3717
17309
3052
16005
2600
14500
2271
12795
2019
10889

(45105)
(92612)
(41119)
(91273)
(35288)
(89040)
(28406)
(85917)
(21285)
(81900)
(16534)
(76994)
(13576)
(71194)
(11565)
(64499)
(10102)
(56915)
(8981)
(48436)

4752
8023
4514
7956
4137
7844
3638
7688
2963
6941
2197
5334
1717
4176
1391
3328
1155
2692
977
2202

(21138)
(35688)
(20079)
(35390)
(18402)
(34892)
(16182)
(34198)
(13180)
(30875)
(9773)
(23727)
(7637)
(18576)
(6187)
(14803)
(5137)
(11974)
(4346)
(9795)

Max. Column Loading (Loaded @ C.G.)
K = .65
Lbs.
N
10247
20854
9639
20655
8711
20324
7562
19861
6285
19265
4964
18536
3994
17675
3350
16682
2893
15556
2553
14298

(45581)
(92763)
(42876)
(91878)
(35748)
(90405)
(33637)
(88346)
(27957)
(85695)
(22081)
(82452)
(17766)
(78622)
(14901)
(74205)
(12869)
(69196)
(11356)
(63600)

K = 1.0
Lbs.
N
9965
20763
8629
20293
6786
19509
4785
18412
3523
17002
2806
15278
2345
13240
2019
10889
1773
8610
1577
6974

(44326)
(92358)
(38384)
(90268)
(30185)
(86780)
(21285)
(81900)
(15671)
(75628)
(12482)
(67960)
(10431)
(58894)
(8981)
(48436)
(7886)
(38299)
(7015)
(31022)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

19

K = 1.2
Lbs.
N
9756
20694
7933
20017
5572
18889
3717
17309
2806
15278
2271
12795
1913
9884
1650
7567
1446
5979
1279**
4843**

(43397)
(92051)
(35288)
(89040)
(24785)
(84022)
(16534)
(76994)
(12482)
(67960)
(10102)
(56915)
(8509)
(43966)
(7339)
(33659)
(6432)
(26596)
(5689)
(21543)

Channel & Combinations

In.

Channel

B22 Channel
B22
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum
• Weight: 1.90 Lbs./Ft. (2.83 kg/m)
15/8”
(41.3)

3/8”
(9.5)

15/8”

3/8”
(9.5)

7/8”
(22.2)

Y

X

9/32”
(7.1)

X

(41.3)

.7252
(18.4)

Y

Channel & Combinations

13/16”
(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B22
B22A
B22X

Weight

Areas of
Section

Moment of
Inertia (I)
in.4

cm4

Section
Modulus (S)

lbs./ft.

kg/m

sq. in. cm2

in.3

cm3

1.910
3.820
6.649

(2.84)
(5.69)
(9.89)

.562 (3.62) .1912 (7.96) .2125 (3.48)
1.124 (7.25) .9732 (40.51) .5989 (9.81)
1.956 (12.62) 4.1484 (172.67) 1.7019 (27.89)

Y - Y Axis
Radius of
Gyration (r)
in.

cm

.583
.931
1.456

(1.48)
(2.36)
(3.70)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

cm3

.2399 (9.99) .2953 (4.84)
.4798 (19.97) .5905 (9.68)
1.1023 (45.88) 1.2027 (19.71)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y
15/8”
(41.3)
X

X

Y
13/16”
(20.6)

B22A

15/8”
(41.3)

Wt. 3.80 Lbs./Ft. (5.65 kg/m)

Reference page 14 for general fitting and standard finish specifications.

20

31/4”
(82.5)

Radius of
Gyration (r)
in.

cm

.653
.653
.751

(1.66)
(1.66)
(1.91)

B22 Combinations
1.3833
(35.1)

15/8”
(41.3)

Y

Y

Y

(82.5)

X

X

(82.5)

Y

15/8”

15/8”

31/4”

(41.3)

(41.3)

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

31/4”
(82.5)

(82.5)

X
X

Y

Y
31/4”
(82.5)

31/4”
(82.5)

(82.5)

B22A3

31/4”

X

X

X

15/8”
(41.3)

Y

31/4”

31/4”
X

1.3540
(34.4)

1.3250
(33.7)

Y

.725
(18.4)

15/8”
(41.3)

B22A4

B22AD3

B22B

Wt. 7.60 Lbs./Ft. (11.31 kg/m)

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

Wt. 3.80 Lbs./Ft. (5.65 kg/m)

27/16”
(61.9)

Y

15/8”
Y

(41.3)

Y
31/4”

X

31/4”

(82.5)

X

X

X

Y

13/16”

31/4”
(82.5)

(41.3)

X

(20.6)

.8416
(21.4)

15/8”
(41.3)

B22C3

B22B3

B22C

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

Wt. 3.80 Lbs./Ft. (5.65 kg/m)

15/8”
(41.3)

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

27/16”
15/8”

(61.9)

(41.3)

Y
X

X

31/4”

(123.8)

X

.842
(21.4)

(41.3)

(123.8)

X

Y
Y

15/8”

7
X 4 /8”

(82.5)

X

X
Y

Y

47/8”

(82.5)

X
.769
(19.5)

Y

Y

31/4”

2.467
(62.7)

1.5813
(40.2)

Y

.769
(19.5)

13/16”

15/8”

15/8”

(20.6)

(41.3)

(41.3)

B22D

B22D3

Wt. 3.80 Lbs./Ft. (5.65 kg/m)

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

B22E

15/8”
(41.3)

B22E3

Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m)

27/16”
(61.9)

Y

1.730
(43.9)

X
.105
(2.6)

Y

1.730
(43.9)

Y X

4”

(101.6) X

X

X

X
1.795
(45.6)

Y

1.231
(31.3)

1.168
(29.7)

2”
(50.8)

213/16”

Y

.104
(2.6)

.105
(2.6)

4”
(101.6)

(71.4)

47/8”
(123.8)

B22LPL

B22PL

Wt. 2.90 Lbs./Ft. (4.31 kg/m)

Wt. 3.35 Lbs./Ft. (4.98 kg/m)

.918
(23.3)

B22X

Y

7/16”
(11.1)

1.835
(46.6)

Wt. 6.70 Lbs./Ft. (9.97 kg/m)
Reference page 14 for general fitting and standard finish specifications.

21

Channel & Combinations

15/8”

(82.5)

Y

1.9249
(48.9)

Y

47/8”
(123.8)

X

B22 Beam Loading Data

Beam Span

Channel & Combinations

In.

mm

12

(305)

18

(457)

24

(609)

30

(762)

36

(914)

42

(1067)

48

(1219)

54

(1371)

60

(1524)

66

(1676)

72

(1829)

78

(1981)

84

(2133)

90

(2286)

96

(2438)

102

(2591)

108

(2743)

114

(2895)

120

(3048)

Channel

Uniform Load and Deflection

Uniform Load @ Deflection =
1/240 Span 1/360 Span

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X

2610
2610*
5790*
2269
2610*
5790*
1702
2610*
5790*
1361
2610*
5790*
1135
2610*
5790*
972
2610*
5790*
851
2405
5790*
756
2138
5790*
681
1924
5645
619
1749
5132
567
1603
4704
524
1480
4342
486
1374
4032
454
1283
3763
425
1202
3528
400
1132
3320
378
1069
3136
358
1013
2971
340
962
2822

(11610)
(11610)
(25755)
(10093)
(11610)
(25755)
(7571)
(11610)
(25755)
(6054)
(11610)
(25755)
(5049)
(11610)
(25755)
(4323)
(11610)
(25755)
(3785)
(10698)
(25755)
(3363)
(9510)
(25755)
(3029)
(8558)
(25110)
(2753)
(7780)
(22828)
(2522)
(7130)
(20924)
(2331)
(6583)
(19314)
(2162)
(6112)
(17935)
(2019)
(5707)
(16738)
(1890)
(5347)
(15693)
(1779)
(5035)
(14768)
(1681)
(4755)
(13949)
(1592)
(4506)
(13215)
(1512)
(4279)
(12553)

.014
.002
.001
.031
.007
.003
.056
.017
.008
.087
.033
.017
.126
.057
.029
.172
.091
.046
.224
.125
.068
.284
.158
.097
.351
.195
.130
.424
.236
.158
.505
.281
.188
.593
.330
.220
.687
.383
.255
.789
.440
.293
.898
.500
.334
1.013
.565
.377
1.136
.633
.422
1.266
.706
.471
1.403
.782
.521

(.35)
(.05)
(.02)
(.79)
(.18)
(.07)
(1.42)
(.43)
(.20)
(2.21)
(.84)
(.73)
(3.20)
(1.45)
(.73)
(4.37)
(2.31)
(1.17)
(5.69)
(3.17)
(1.73)
(7.21)
(4.01)
(2.46)
(8.91)
(4.95)
(3.30)
(10.77)
(5.99)
(4.01)
(12.83)
(7.14)
(4.77)
(15.06)
(8.38)
(5.59)
(17.45)
(9.73)
(6.48)
(20.04)
(11.17)
(7.44)
(22.81)
(12.70)
(8.48)
(25.73)
(14.35)
(9.57)
(28.85)
(16.08)
(10.72)
(32.15)
(17.93)
(11.96)
(35.63)
(19.86)
(13.23)

2610
2610*
5790*
2269
2610*
5790*
1702
2610*
5790*
1361
2610*
5790*
1135
2610*
5790*
972
2610*
5790*
758
2405
5790*
599
2138
5790*
485
1924
5645
401
1749
5132
337
1603
4704
287
1455
4342
248
1255
4032
216
1093
3763
190
961
3528
168
851
3320
150
759
3136
134
681
2971
121
615
2706

(11610)
(11610)
(25755)
(10093)
(11610)
(25755)
(7571)
(11610)
(25755)
(6054)
(11610)
(25755)
(5049)
(11610)
(25755)
(4323)
(11610)
(25755)
(3372)
(10698)
(25755)
(2664)
(9510)
(25755)
(2157)
(8558)
(25110)
(1784)
(7780)
(22828)
(1499)
(7130)
(20924)
(1276)
(6472)
(19314)
(1103)
(5582)
(17935)
(961)
(4862)
(16738)
(845)
(4275)
(15693)
(747)
(3785)
(14768)
(667)
(3376)
(13949)
(596)
(3029)
(13215)
(538)
(2735)
(12037)

2610
2610*
5790*
2269
2610*
5790*
1702
2610*
5790*
1294
2610*
5790*
899
2610*
5790*
660
2610*
5790*
505
2405
5790*
399
2024
5790*
323
1640
5645
267
1355
5132
225
1139
4704
191
970
4270
165
837
3682
144
729
3207
126
640
2819
112
567
2497
100
506
2227
90
454
1999
81
410
1804

(11610)
(11610)
(25755)
(10093)
(11610)
(25755)
(7571)
(11610)
(25755)
(5756)
(11610)
(25755)
(3999)
(11610)
(25755)
(2936)
(11610)
(25755)
(2246)
(10698)
(25755)
(1775)
(9003)
(25755)
(1437)
(7295)
(25110)
(1187)
(6027)
(22828)
(1001)
(5066)
(20924)
(849)
(4315)
(18994)
(734)
(3723)
(16378)
(640)
(3243)
(14265)
(560)
(2847)
(12539)
(498)
(2522)
(11107)
(445)
(2251)
(9906)
(400)
(2019)
(8892)
(360)
(1824)
(8024)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

Reference page 14 for general fitting and standard finish specifications.

22

B22 Column Loading Data

Unbraced
Height
In.

Channel
Style

mm
(305)

18

(457)

24

(609)

30

(762)

36

(914)

42

(1067)

48

(1219)

54

(1371)

60

(1524)

66

(1676)

72

(1829)

78

(1981)

84

(2133)

90

(2286)

96

(2438)

102

(2591)

108

(2743)

114

(2895)

120

(3048)

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

10454
21625
46948
9950
21433
46531
9311
21164
45947
8582
20819
45198
7801
20397
44282
6998
19898
43198
6193
19322
41948
5392
18669
40530
4718
17940
38948
4202
17134
37198
3791
16251
35281
3456
15291
33197
3176
14255
30947
2936
13141
28529
2728
11951
25945
2545
10678
23182
2381
9524
20676
2234
8548
18558
2101
7715
16749

(46502)
(96193)
(208835)
(44260)
(95339)
(206980)
(41417)
(94142)
(204382)
(38174)
(92607)
(201051)
(34700)
(90730)
(196976)
(31128)
(88511)
(192154)
(27548)
(85948)
(186594)
(23985)
(83044)
(180286)
(20987)
(79801)
(173249)
(18691)
(76216)
(165465)
(16863)
(72288)
(156938)
(15373)
(68018)
(147667)
(14127)
(63409)
(137659)
(13060)
(58454)
(126903)
(16583)
(53160)
(115409)
(11321)
(47498)
(103118)
(10591)
(42365)
(91971)
(9937)
(38023)
(82550)
(9346)
(34318)
(74503)

4276
7002
18975
4153
6959
18859
3993
6898
18693
3802
6821
18485
3589
6728
18233
3360
6620
17940
3118
6496
17604
2864
6263
16973
2631
5340
14471
2434
4587
12431
2264
3968
10753
2116
3456
9366
1984
3028
8206
1867
2667
7227
1761
2359
6393
1664
2093
5672
1575
1867
5059
1494
1675
4539
1418
1512
4097

(19120)
(31146)
(84405)
(18473)
(30955)
(83899)
(17762)
(30684)
(84440)
(16912)
(30341)
(82225)
(15964)
(29927)
(81104)
(14946)
(29447)
(79801)
(13869)
(28895)
(78306)
(12740)
(27859)
(75499)
(11703)
(23753)
(64370)
(10827)
(20404)
(55296)
(10071)
(17650)
(47832)
(9412)
(15373)
(41662)
(8825)
(13469)
(36502)
(8305)
(11863)
(32147)
(7833)
(10493)
(28437)
(7402)
(9310)
(25230)
(7006)
(8305)
(22503)
(6645)
(7451)
(20190)
(6307)
(6726)
(18224)

10598
21677
47061
10253
21551
46787
9801
21373
46401
9268
21145
45906
8676
20866
45300
8048
20537
44586
7401
20157
43761
6746
19276
42825
6093
19244
41779
5441
18712
40624
4869
18129
39358
4412
17496
37984
4037
16812
36499
3724
16077
34903
3456
15291
33197
3225
14455
31382
3022
13568
29456
2842
12630
27420
2680
11642
25275

(47142)
(96424)
(209338)
(45607)
(95863)
(208119)
(43597)
(95072)
(206402)
(41226)
(94057)
(204200)
(38593)
(92816)
(201504)
(35799)
(91353)
(198328)
(32921)
(89663)
(194568)
(30008)
(87745)
(190495)
(27103)
(85601)
(185842)
(24203)
(83235)
(180704)
(21658)
(80642)
(175073)
(19625)
(77826)
(168961)
(17957)
(74783)
(162355)
(16565)
(71514)
(155256)
(15373)
(68018)
(147667)
(14345)
(64299)
(139594)
(13442)
(60353)
(131027)
(12642)
(56181)
(121970)
(11921)
(51786)
(112429)

10222
21539
46761
9481
21239
46110
8582
20819
45198
7601
20279
44026
6595
19619
42593
5595
18840
40901
4718
17940
38948
4090
16920
36733
3616
15781
34260
3242
14521
31525
2936
13141
28529
2680
11642
25275
2461
10076
21875
2270
8778
19057
2101
7715
16749
1951
6834
14836
1816
6096
13234
1694
5471
11877
1583**
4937
10718

(45470)
(95810)
(208003)
(42173)
(94476)
(205107)
(38174)
(92607)
(201051)
(33811)
(90205)
(195837)
(28336)
(87269)
(189463)
(24888)
(83804)
(181937)
(20987)
(79801)
(173254)
(18193)
(75264)
(163396)
(16085)
(70197)
(152396)
(14421)
(64592)
(140230)
(13060)
(58454)
(126903)
(11921)
(51786)
(112429)
(10947)
(44820)
(97305)
(10097)
(39046)
(84770)
(9346)
(34318)
(74503)
(8678)
(30399)
(65994)
(8078)
(27116)
(58868)
(7535)
(24336)
(52831)
(7041)
(21961)
(47676)

9950
21433
46531
8955
21001
45593
7801
20397
44282
6595
19619
42593
5392
18669
40530
4444
17546
38092
3791
16251
35281
3310
14782
32092
2936
13141
28529
2634
11328
24593
2381
9524
20676
2166
8115
17617
1980
6998
15192
1816
6096
13234
1671
5357
11630
1542**
4746
10303
1426**
4233
9190
1322**
3799**
8247
1228**
3429**
7444

(44260)
(95339)
(206980)
(39834)
(93417)
(202808)
(34700)
(90730)
(196976)
(29336)
(87269)
(189463)
(23985)
(83044)
(180286)
(19768)
(78048)
(169441)
(16863)
(72288)
(156938)
(14723)
(65753)
(142752)
(13060)
(58454)
(126903)
(11716)
(50389)
(109395)
(10591)
(42365)
(91971)
(9635)
(36097)
(78364)
(8807)
(31128)
(67577)
(8078)
(27116)
(58868)
(7433)
(23829)
(51733)
(6343)
(21111)
(45830)
(68599)
(18829)
(40879)
(5880)
(16899)
(36684)
(5462)
(15253)
(33112)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

23

Channel & Combinations

12

B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

B24 Channel & Combinations
B24
• Thickness: 14 Gauge (1.9 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum
• Weight: 1.40 Lbs./Ft. (2.08 kg/m)
15/8”
(41.3)
3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

9/32”

Y
15/8”

X

(41.3)

(7.1)

X
.7304
(18.6)

Channel & Combinations

13/16”
(20.6)

X - X Axis

SECTION PROPERTIES

Channel

lbs./ft.

B24
B24A

Areas of
Section

Weight
kg/m

1.442 (2.15)
2.884 (4.29)

Y

sq. in. cm2

Moment of
Inertia (I)
in.4

cm4

Section
Modulus (S)
in.3

Y - Y Axis
Radius of
Gyration (r)

cm3

.424 (2.74) .1494 (6.22) .1670 (2.74)
.848 (5.47) .7514 (31.28) .4624 (7.58)

in.

cm

.594
.941

(1.51)
(2.39)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

Radius of
Gyration (r)

cm3

.1857 (7.73) .2286 (3.75)
.3713 (15.45) .4570 (7.49)

in.

cm

.662
.662

(1.68)
(1.68)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y

Y

31/4”
Y

(82.5)

31/4”
X

X

(82.5)

X

X

15/8”
(41.3)

13/16”

.730

13/16”
(20.6)

15/8”
(41.3)

15/8”

15/8”
(41.3)

(41.3)

B24B

Wt. 2.80 Lbs./Ft. (4.16 kg/m)

31/4”
(82.5)

Y

15/8”
(41.3)

(18.6)

(20.6)

B24A

X

X
Y

Y

15/8”
(41.3)

Wt. 2.80 Lbs./Ft. (4.16 kg/m)

B24C
Wt. 2.80 Lbs./Ft. (4.16 kg/m)

Reference page 14 for general fitting and standard finish specifications.

24

B24 Beam & Column Loading Data
BEAM LOADING
Beam Span
In.
mm
(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span
Lbs.
N
Lbs.
N

Uniform Load and Deflection
Lbs.
N
In.
mm
1750
1750*
1379
1750*
919
1750*
689
1750*
551
1518
460
1265
394
1084
345
949
306
843
276
759

B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A

.014
.002
.057
.014
.128
.048
.227
.115
.355
.195
.511
.281
.695
.383
.908
.500
1.149
.633
1.419
.782

(7784)
(7784)
(6134)
(7784)
(4088)
(7784)
(3065)
(7784)
(2451)
(6752)
(2046)
(5627)
(1752)
(4822)
(1534)
(4221)
(1361)
(3750)
(1228)
(3376)

1750
1750*
1379
1750*
919
1750*
607
1750*
389
1518
270
1265
198
990
152
758
120
599
97
485

(.35)
(.05)
(1.45)
(.35)
(3.25)
(1.22)
(5.76)
(2.92)
(9.02)
(4.95)
(12.98)
(7.14)
(17.65)
(9.73)
(23.06)
(12.70)
(29.18)
(16.08)
(36.04)
(19.86)

(7784)
(7784)
(6134)
(7784)
(4088)
(7784)
(2700)
(7784)
(1730)
(6752)
(1201)
(5627)
(881)
(4404)
(676)
(3372)
(534)
(2664)
(431)
(2157)

1750
1750*
1379
1750*
720
1750*
405
1750*
259
1294
180
898
132
660
101
505
80
399
65
323

(7784)
(7784)
(6134)
(7784)
(3203)
(7784)
(1801)
(7784)
(1152)
(5756)
(800)
(3994)
(587)
(2936)
(449)
(2246)
(356)
(1775)
(289)
(1437)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

Channel
Style

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

6441
13212
5874
12993
5038
12627
4043
12115
3008
11456
2324
10651
1898
9700
1608
8602
1397
7358
1236
6024

(28651)
(58770)

3077
4988
2896
4924
2619
4819
2272
4675
1873
4020
1562
3048
1340
2362
1175
1866
1046
1498
942
1216

(13687)
(22188)

6509
13237
6124
13092
5535
12851
4800
12512
3978
12078
3123
11546
2502
10918
2089
10194
1796
9373
1578
8455

(28953)
(58881)

6330
13171
5483
12828
4302
12256
3008
11456
2200
10427
1740
9169
1444
7683
1236
6024
1078
4760
953**
3856

(28157)
(58587)

6198
13121
5038
12627
3516
11804
2324
10651
1740
9169
1397
7358
1168
5464
1000
4184
870**
3306
764**
2677**

(27570)
(58365)

(26129)
(57796)
(22410)
(56167)
(17984)
(53890)
(13380)
(50959)
(10337)
(47378)
(8443)
(43148)
(7153)
(38263)
(6214)
(32730)
(5498)
(26796)

(12882)
(21903)
(11650)
(21436)
(10106)
(20795)
(8331)
(17882)
(6948)
(13558)
(5960)
(10506)
(5226)
(8300)
(4653)
(6663)
(4190)
(5409)

(27241)
(58236)
(24621)
(57164)
(21351)
(55656)
(17695)
(53725)
(13892)
(51359)
(11129)
(48565)
(9292)
(45345)
(7989)
(41693)
(7019)
(37610)

(24389)
(57062)
(19136)
(54517)
(13380)
(50959)
(9786)
(46381)
(7740)
(40786)
(6423)
(34175)
(5498)
(26796)
(4795)
(21173)
(4239)
(17152)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

25

(22410)
(56167)
(15640)
(52507)
(10337)
(47378)
(7740)
(40786)
(6214)
(32730)
(5195)
(24305)
(4448)
(18611)
(3870)
(14706)
(3398)
(11908)

Channel & Combinations

12

Channel
Style

B26 Channel & Combinations
B26
• Thickness: 16 Gauge (1.5 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized
• Weight: 1.12 Lbs./Ft. (1.66 kg/m)
15/8”
(41.3)

3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

9/32”

27/64”

Y

(7.1)

(10.7)

X

15/8”
(41.3)

X

27/64”

.7745
(19.7)

(10.7)
13/16” Y

Channel & Combinations

(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B26
B26A

Areas of
Section

Weight
lbs./ft.

kg/m

1.234
2.467

(1.84)
(3.67)

sq. in. cm2

Moment of
Inertia (I)
in.4

cm4

Section
Modulus (S)
in.3

Y - Y Axis
Radius of
Gyration (r)

cm3

.363 (2.34) .1337 (5.57) .1581 (2.59)
.726 (4.68) .7086 (29.49) .4361 (7.15)

in.

cm

.607
.988

(1.54)
(2.51)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

.1564 (6.51) .1925
.3128 (13.02) .3850

Radius of
Gyration (r)

cm3

in.

cm

(3.15)
(6.31)

.656
.656

(1.67)
(1.67)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y

31/4”
(82.5)

1
X 3 /4”

1
X 3 /4”

(82.5)

X

X
Y

(82.5)

X

Y

Y

13/16”

.774

(20.6)

(19.7)

15/8”

B26A

(41.3)

(41.3)

(41.3)

X

Y 15/8”

5
Y 1 /8”

15/8”

13/16”

15/8”

(20.6)

(41.3)

(41.3)

Wt. 2.24 Lbs./Ft. (3.33 kg/m)

15/8”
(41.3)

B26B

B26C

Wt. 2.24 Lbs./Ft. (3.33 kg/m)

Wt. 2.24 Lbs./Ft. (3.33 kg/m)

Reference page 14 for general fitting and standard finish specifications.

26

B26 Beam & Column Loading Data
BEAM LOADING
Beam Span
mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A

1220
1220*
1163
1220*
775
1220*
581
1220*
465
1220*
388
1052
332
902
291
789
258
702
233
631

(5427)
(5427)

.014
.001
.057
.012
.128
.040
.228
.096
.357
.188
.514
.281
.699
.383
.913
.500
1.156
.633
1.427
.782

(.35)
(.02)

1220
1220*
1163
1220*
775
1220*
509
1220*
326
1220*
226
1052
166
824
127
631
101
498
81
404

(5427)
(5427)

1220
1220*
1163
1220*
603
1220*
339
1220*
217
1076
151
747
111
549
85
420
67
332
54
269

(5427)
(5427)

(5173)
(5427)
(3447)
(5427)
(2584)
(5427)
(2068)
(5427)
(1726)
(4679)
(1477)
(4012)
(1294)
(3509)
(1147)
(3122)
(1036)
(2807)

(1.45)
(.30)
(3.25)
(1.01)
(5.79)
(2.44)
(9.07)
(4.77)
(13.05)
(7.14)
(17.75)
(9.73)
(23.19)
(12.70)
(29.36)
(16.08)
(36.24)
(19.86)

(5173)
(5427)
(3447)
(5427)
(2264)
(5427)
(1450)
(5427)
(1450)
(4679)
(738)
(3665)
(565)
(2807)
(449)
(2215)
(360)
(1797)

(5173)
(5427)
(2682)
(5427)
(1508)
(5427)
(965)
(4786)
(965)
(3323)
(494)
(2442)
(378)
(1868)
(298)
(1477)
(240)
(1196)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

Channel
Style

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

4002
8151
3740
8051
3336
7883
2828
7648
2251
7346
1705
6977
1358
6541
1129
6038
967
5467
847
4830

(17802)
(36257)

2216
3630
2109
3591
1941
3528
1725
3441
1469
3066
1203
2385
1011
1884
871
1512
766
1231
684
1015

(9857)
(16147)

4032
8163
3857
8096
3579
7986
3217
7831
2793
7631
2326
7388
1851
7100
1513
6767
1277
6391
1105
5970

(17935)
(36311)

3952
8133
3554
7975
2962
7713
2251
7346
1603
6874
1233
6298
1003
5616
847
4830
734
3940
648
3192

(17579)
(36177)

3891
8109
3336
7883
2546
7505
1705
6977
1233
6298
967
5467
797
4486
680
3463
592**
2736
523**
2216**

(17308)
(36070)

(16636)
(35812)
(14839)
(35065)
(12579)
(34020)
(10013)
(32676)
(7584)
(31035)
(6040)
(29096)
(5022)
(26858)
(4301)
(24318)
(3767)
(21485)

(9381)
(15973)
(8634)
(15693)
(7613)
(15306)
(6534)
(13638)
(5351)
(10609)
(4497)
(8380)
(3874)
(6726)
(3407)
(5476)
(3042)
(4515)

(17157)
(36013)
(15920)
(35523)
(14310)
(34834)
(12424)
(33944)
(10346)
(32863)
(8233)
(31582)
(6730)
(30101)
(5680)
(28428)
(4915)
(26556)

(15809)
(35474)
(13175)
(34309)
(10013)
(32676)
(7130)
(30577)
(5484)
(28015)
(4461)
(24981)
(3767)
(21485)
(3265)
(17526)
(2882)
(14199)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

27

(14838)
(35065)
(11325)
(33384)
(7584)
(31035)
(5484)
(28015)
(4301)
(24318)
(3545)
(19955)
(3025)
(15404)
(2633)
(12170)
(2326)
(9857)

Channel & Combinations

In.

Channel

B32 Channel & Combinations
B32
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304
• Weight: 1.70 Lbs./Ft. (2.53 kg/m)
15/8”
(41.3)

3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

9/32”

Y
13/8”

(7.1)

X

X

(34.9)

.6052
(15.4)

Channel & Combinations

13/16”
(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B32
B32A

Areas of
Section

Weight

Y

Moment of
Inertia (I)
in.4

cm4

Section
Modulus (S)

lbs./ft.

kg/m

sq. in. cm2

in.3

1.733
3.467

(2.58)
(5.16)

.510 (3.29) .1252 (5.21) .1626 (2.67)
1.020 (6.58) .6238 (25.96) .4537 (7.43)

Y - Y Axis
Radius of
Gyration (r)

cm3

in.

cm

.496
.782

(1.26)
(1.99)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

Radius of
Gyration (r)

cm3

.2098 (8.73) .2582 (4.23)
.4195 (17.46) .5163 (8.46)

in.

cm

.642
.642

(1.63)
(1.63)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y

13/8”

15/8”
(41.3)

15/8”
(41.3)
Y

(34.9)

Y
X

23/4”
(69.8)

X
X

X
31/4”

31/4”
(82.5)

X

(82.5)

X
Y

Y
13/16”
(20.6)

.605
(15.4)

15/8”

.687
(17.4)

13/8”
(34.9)

13/8”

(41.3)

(34.9)

B32A

B32B

Wt. 3.40 Lbs./Ft. (5.06 kg/m)

Wt. 3.40 Lbs./Ft. (5.06 kg/m)

B32C
Wt. 3.40 Lbs./Ft. (5.06 kg/m)

Reference page 14 for general fitting and standard finish specifications.

28

Y

B32 Beam & Column Loading Data
BEAM LOADING
Beam Span
mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A

2210
2210*
1299
2210*
866
2210*
649
1817
520
1454
433
1211
371
1038
325
909
289
808
260
727

(9830)
(9830)

.016
.003
.065
.022
.147
.076
.262
.148
.410
.231
.590
.333
.803
.453
1.049
.591
1.327
.749
1.639
.924

(.40)
(.07)

2210
2210*
1299
2210*
866
2210*
495
1817
317
1454
220
1092
162
802
124
614
98
485
79
393

(9830)
(9830)

2210
2210*
1299
2210*
587
2210*
330
1638
211
1048
147
728
108
535
83
410
65
324
53
262

(9830)
(9830)

(5778)
(9830)
(3852)
(9830)
(2887)
(8082)
(2313)
(6468)
(1926)
(5387)
(1650)
(4617)
(1445)
(4043)
(1285)
(3594)
(1156)
(3234)

(1.65)
(.56)
(3.73)
(1.93)
(6.65)
(3.76)
(10.41)
(5.87)
(14.98)
(8.46)
(20.39)
(11.50)
(26.64)
(15.01)
(33.70)
(19.02)
(41.63)
(23.47)

(5778)
(9830)
(3852)
(9830)
(2202)
(8082)
(1410)
(6468)
(978)
(4857)
(720)
(3567)
(551)
(2731)
(436)
(2157)
(351)
(1748)

(5778)
(9830)
(2611)
(9830)
(1468)
(7286)
(938)
(4662)
(654)
(3238)
(480)
(2380)
(369)
(1824)
(289)
(1441)
(236)
(1165)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

Channel
Style

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

10278
21320
9104
20806
7640
19950
6151
18751
4778
17210
3870
15326
3243
13100
2774
10525
2403
8316
1993
6736

(45719)
(94836)

4036
6557
3732
6431
3323
6228
2877
5954
2435
4692
2089
3448
1817
2609
1594
2014
1407
1592
1221
1289

(17953)
(29167)

10432
21378
9600
21039
8479
20474
7265
19682
6060
18665
4923
17421
4114
15951
3531
14256
3083
12334
2723
10203

(46404)
(95094)

10035
21224
8387
20421
6520
19083
4778
17210
3693
14801
2994
11858
2489
8798
1993
6736
1574**
5322
1275**
4311

(44638)
(94409)

9753
21106
7640
19950
5425
18023
3870
15326
2994
11858
2403
8316
1807**
6110
1384**
4678
1093**
3696**
886**
2994**

(43383)
(93884)

(40496)
(92550)
(33984)
(88742)
(27361)
(83408)
(21253)
(76554)
(17214)
(68173)
(14425)
(58272)
(12339)
(46817)
(10689)
(36991)
(8865)
(29963)

(16601)
(28606)
(14781)
(27703)
(12797)
(26485)
(10831)
(20871)
(9292)
(15337)
(8082)
(11605)
(7090)
(8959)
(6258)
(7081)
(5431)
(5734)

(42702)
(93586)
(37716)
(91073)
(32316)
(87550)
(26956)
(83026)
(21898)
(77492)
(18300)
(70953)
(15706)
(63414)
(13714)
(54864)
(12112)
(45385)

(37307)
(90837)
(29002)
(84885)
(21253)
(76554)
(16427)
(65838)
(13318)
(52747)
(11071)
(39135)
(8865)
(29963)
(7001)
(23673)
(5671)
(19176)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

29

(33984)
(88742)
(24131)
(80170)
(17214)
(68173)
(13318)
(52747)
(10689)
(36991)
(8038)
(27178)
(6156)
(20809)
(4862)
(16440)
(3941)
(13318)

Channel & Combinations

In.

Channel

B42 Channel & Combinations
B42
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304
• Weight: 1.44 Lbs./Ft. (2.14 kg/m)
Note: Also available in 14 gauge (1.9mm) material as B44
15/8”
(41.3)
3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

1”
(25.4)

X

Channel & Combinations

B42
B42A

lbs./ft.

kg/m

1.468
2.936

(2.18)

Areas of
Section

Moment of
Inertia (I)

sq. in. cm2

.432
.864

(4.37)

Y

X - X Axis

SECTION PROPERTIES

Weight

(7.1)

X
.4226
(10.7)

13/16”
(20.6)

Channel

9/32”

Y

in.4

(2.79) .0554

cm4

Section
Modulus (S)
in.3

cm3

(2.31) .0968 (1.59)

(5.57) .2689 (11.19) .2689 (4.41)

Y - Y Axis
Radius of
Gyration (r)
in.

.358
.558

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm

cm4

in.3

.1645 (6.85) .2025
.3292 (13.70) .4052

(.91)
(1.42)

cm3

in.

cm

(3.32)

.617
.617

(1.57)

(6.64)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y
Y

1”

2”

(25.4)
(50.8)

X 31/4”

X
X

X

(82.5)

15/8”

Y

(41.3)

13/16”
(20.6)

Y

15/8”
(41.3)

.428
(10.9)

1”
(25.4)

B42A

B42B

Wt. 2.88 Lbs./Ft. (4.28 kg/m)

Wt. 2.88 Lbs./Ft. (4.28 kg/m)

Reference page 14 for general fitting and standard finish specifications.

30

Radius of
Gyration (r)

(1.57)

B42 Beam & Column Loading Data
BEAM LOADING
Beam Span
mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A

1538
1590*
769
1590*
513
1428
384
1071
308
857
256
714
220
612
192
535
171
476
154
428

(6841)
(7072)

.022
.005
.088
.038
.198
.114
.352
.203
.550
.318
.792
.457
1.079
.623
1.409
.813
1.783
1.029
2.202
1.271

(.56)
(.13)

1538
1590*
769
1590*
388
1428
218
1053
140
674
97
468
71
344
55
263
43
208
35
168

(6841)
(7072)

1538
1590*
582
1590*
259
1248
145
702
93
449
65
312
48
229
36
176
29
139
23
112

(6841)
(7072)

(3420)
(7072)
(2282)
(6352)
(1708)
(4764)
(1370)
(3812)
(1139)
(3176)
(978)
(2722)
(854)
(2380)
(760)
(2117)
(685)
(1904)

(2.23)
(.96)
(5.03)
(2.89)
(8.94)
(5.15)
(13.97)
(8.08)
(20.11)
(11.61)
(27.40)
(15.82)
(35.79)
(20.65)
(45.29)
(26.13)
(55.93)
(32.28)

(3420)
(7072)
(1726)
(6352)
(970)
(4684)
(623)
(2998)
(431)
(2082)
(316)
(1530)
(244)
(1170)
(191)
(925)
(155)
(747)

(2589)
(7072)
(1152)
(5551)
(645)
(3122)
(413)
(1997)
(289)
(1388)
(213)
(1018)
(160)
(783)
(129)
(618)
(102)
(498)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

Channel
Style

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

9138
21094
8137
19757
7050
18094
5405
16139
3512
13906
2439
11387
1792
8645
1372**
6619
1084**
5230
878**
4236

(40648)
(93831)

3493
5834
3145
5585
2722
5237
2227
4818
1718
4352
1351
3856
1087
3332
891
2873
743
2495
628
2182

(15537)
(25951)

9283
21304
8540
20299
7657
19067
6786
17632
5272
16008
3694
14200
2714
12206
2078
10012
1642
7922
1330**
6417

(41293)
(94765)

8916
20793
7589
18964
5925
16654
3512
13906
2247
10710
1561**
7531
1147**
5533
878**
4236
–
3347
–
2711**

(39660)
(92492)

8670
20469
7050
18094
4335
15057
2439
11387
1561**
7531
1084**
5230
796**
3842
–
2942**
–
2324**
–
1883**

(38566)
(91050)

(36195)
(87883)
(31360)
(80486)
(24042)
(71790)
(15622)
(61857)
(10849)
(50652)
(7971)
(38455)
(6103)
(29443)
(4822)
(23264)
(3905)
(18842)

(13989)
(24843)
(12108)
(23295)
(9906)
(21431)
(7642)
(19358)
(6009)
(17152)
(4835)
(14821)
(3963)
(12780)
(3305)
(11098)
(2793)
(9706)

(37988)
(90294)
(34060)
(84814)
(30185)
(78431)
(23451)
(71207)
(16432)
(64165)
(12072)
(54295)
(9243)
(44535)
(7304)
(35239)
(5916)
(28544)

(33757)
(84356)
(26356)
(74080)
(15622)
(61857)
(9995)
(47640)
(6943)
(33499)
(5102)
(24612)
(3905)
(18842)
–
(14888)
–
(12059)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

31

(31360)
(80486)
(19283)
(66977)
(10849)
(50652)
(6943)
(33499)
(4822)
(23264)
(3541)
(17090)
–
(13086)
–
(10337)
–
(8376)

Channel & Combinations

In.

Channel

B52 Channel & Combinations
B52
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized
• Weight: 1.27 Lbs./Ft. (1.89 kg/m)
15/8”
(41.3)

3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

13/16”

9/32”

Y

(20.6)

(7.1)

X

X
Y

.3366
(8.5)

13/16”

Channel & Combinations

(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B52
B52A

Weight

Areas of
Section

lbs./ft.

kg/m

sq. in. cm2

1.313
2.627

(1.95)

.386
.773

(3.91)

Moment of
Inertia (I)
in.4

cm4

.0320 (1.33)
(4.99) .1517 (6.31)
(2.49)

Section
Modulus (S)
in.3

cm3

.0673 (1.10)
.1868 (3.06)

Y - Y Axis
Radius of
Gyration (r)
in.

cm

.288
.443

(.73)
(1.13)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

.1404 (5.84) .1728
.2809 (11.69) .3457

Radius of
Gyration (r)

cm3

in.

cm

(2.83)

.603
.603

(1.53)

(5.67)

(1.53)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

1.241
(31.5)

Y

13/16”

Y

27/16”

(20.6)

X

(41.3)

X

X
Y

X

X

15/8”
(41.3)

X

15/8”
(41.3)

Y
Y

Y
13/16”

13/16”
(20.6)

31/4”
(82.5)

13/16”

(20.6)

15/8”

15/8”

(41.3)

(20.6)

(41.3)

15/8”
(41.3)

B52A

B52B3

B52B4

Wt. 2.54 Lbs./Ft. (3.78 kg/m)

Wt. 3.81 Lbs./Ft. (5.67 kg/m)

Wt. 5.08 Lbs./Ft. (7.56 kg/m)

Reference page 14 for general fitting and standard finish specifications.

32

B52 Beam & Column Loading Data
BEAM LOADING
Beam Span
mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A

1079
1270*
539
1270*
360
1013
270
759
216
608
180
506
154
434
135
380
120
338
108
304

(4799)
(5649)

.026
.006
.106
.052
.240
.141
.427
.250
.667
.391
.960
.563
1.307
.766
1.707
1.001
2.160
1.267
2.667
1.564

(.66)
(.15)

1079
1270*
506
1270*
225
1013
126
607
81
388
56
270
41
198
32
152
25
120
20
97

(4799)
(5649)

1079
1270*
337
1270*
150
719
84
404
54
259
37
180
28
132
21
101
17
80
13
65

(4799)
(5649)

(2397)
(5649)
(1601)
(4506)
(1201)
(3376)
(961)
(2704)
(800)
(2251)
(685)
(1930)
(600)
(1690)
(534)
(1503)
(480)
(1352)

(2.69)
(1.32)
(6.09)
(3.58)
(10.84)
(6.35)
(16.94)
(9.93)
(24.38)
(14.30)
(33.20)
(19.45)
(43.36)
(25.42)
(54.86)
(32.18)
(67.74)
(39.72)

(2251)
(5649)
(1001)
(4506)
(560)
(2700)
(360)
(1726)
(249)
(1201)
(182)
(881)
(142)
(676)
(111)
(534)
(89)
(431)

(1499)
(5649)
(667)
(3198)
(373)
(1797)
(240)
(1152)
(164)
(800)
(124)
(587)
(93)
(449)
(75)
(356)
(58)
(289)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Channel
Style
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

8407
19160
7519
17444
5397
15275
3178
12692
2034
9683
1412**
6780
1038**
4981
794**
3814
3013
2441**

(37396)
(85228)

3162
5290
2755
4955
2152
4496
1560
3963
1159
3383
891
2799
704
2337
570
1973
470
1684
394
1452

(14065)
(23531)

8543
19425
7879
18144
6653
16547
4785
14667
3081
12516
2139
10084
1572
7545
1203**
5777
951**
4564
770**
3697

(38001)
(86407)

8205
18777
6521
16412
3616
13376
2034
9683
1302**
6248
904**
4339
664**
3188
–
2441**
–
1928**
–
1562**

(36497)
(83524)

7989
18363
5397
15275
2511
11243
1412**
6780
904**
4339
–
3013
–
2214**
–
1695**
–
1339**
–
–

(35537)
(81682)

(33446)
(77595)
(24007)
(67946)
(14136)
(56457)
(9047)
(43072)
(6281)
(30159)
(4617)
(22156)
(3532)
(16965)
(13402)
(10858)

(12255)
(22041)
(9572)
(19999)
(6939)
(17628)
(5155)
(15048)
(3963)
(12450)
(3131)
(10395)
(2535)
(8776)
(2090)
(7491)
(1752)
(6459)

(35047)
(80708)
(29594)
(73605)
(21285)
(65242)
(13705)
(55674)
(9515)
(44856)
(6992)
(33562)
(5351)
(25697)
(4230)
(20301)
(3425)
(16445)

(29007)
(73004)
(16085)
(59499)
(9047)
(43072)
(5791)
(27792)
(4021)
(19301)
(2953)
(14181)
–
(10858)
–
(8576)
–
(6948)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

33

(24007)
(67946)
(11169)
(50011)
(6281)
(30159)
(4021)
(19301)
–
(13402)
–
(9848)
–
(7540)
–
(5956)
–
–

Channel & Combinations

In.

Channel

B54 Channel & Combinations
B54
• Thickness: 14 Gauge (1.9 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum
• Weight: .97 Lbs./Ft. (1.44 kg/m)
15/8”
(41.3)

3/8”
(9.5)

3/8”
(9.5)

7/8”
(22.2)

9/32”

Y

13/16”
(20.6)

(7.1)

X

X
Y

.3422
(8.7)

13/16”

Channel & Combinations

(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B54
B54A

Areas of
Section

Weight
lbs./ft.

kg/m

1.016
2.032

(1.51)
(3.02)

Moment of
Inertia (I)

sq. in. cm2

.299
.598

in.4

Section
Modulus (S)

cm4

in.3

(1.93) .0263 (1.09)
(3.86) .1226 (5.10)

cm3

.0560 (.92)
.1510 (2.47)

Y - Y Axis
Radius of
Gyration (r)
in.

cm

.297
.453

(.75)
(1.15)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

.1106 (4.60)
.2212 (9.12)

in.3

Radius of
Gyration (r)

cm3

.1361 (2.23)
.2722 (4.46)

in.

cm

.608
.608

(1.55)
(1.55)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

1.241
(31.5)

Y

Y
X

X

15/8”
(41.3)

Y

27/16”
(41.3)

X

X

X

Y

13/16”

13/16”
(20.6)

X

Y

Y
15/8”
(41.3)

(20.6)

13/16”

31/4”
(82.5)

15/8”
(41.3)

13/16”

(20.6)

15/8”

(20.6)

(41.3)

15/8”
(41.3)

B54A

B54B3

B54B4

Wt. 1.94 Lbs./Ft. (2.89 kg/m)

Wt. 2.91 Lbs./Ft. (4.33 kg/m)

Wt. 3.88 Lbs./Ft. (5.77 kg/m)

Reference page 14 for general fitting and standard finish specifications.

34

B54 Beam & Column Loading Data
BEAM LOADING
Beam Span
In.

Channel

mm
(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A

870
870*
465
870*
310
832
233
624
186
499
155
416
133
357
116
312
103
277
93
250

(3870)
(3870)

.027
.005
.108
.043
.243
.141
.432
.250
.676
.391
.973
.563
1.324
.766
1.730
1.001
2.189
1.267
2.703
1.564

(.68)
(.13)

870
870*
430
870*
191
832
108
499
69
319
48
222
35
163
27
125
21
98
17
80

(3870)
(3870)

870
870*
287
870*
127
591
72
332
46
213
32
148
23
109
18
83
14
66
11
53

(3870)
(3870)

(2068)
(3870)
(1379)
(3701)
(1036)
(2775)
(827)
(2219)
(689)
(1850)
(591)
(1588)
(516)
(1388)
(458)
(1232)
(413)
(1112)

(2.74)
(1.09)
(6.17)
(3.58)
(10.97)
(6.35)
(17.17)
(9.93)
(24.71)
(14.30)
(33.63)
(19.45)
(43.94)
(25.42)
(55.60)
(32.18)
(68.65)
(39.72)

(1913)
(3870)
(849)
(3701)
(480)
(2219)
(307)
(1419)
(213)
(987)
(155)
(725)
(120)
(556)
(93)
(436)
(75)
(356)

(1276)
(3870)
(565)
(2629)
(320)
(1477)
(204)
(947)
(142)
(658)
(102)
(485)
(80)
(369)
(62)
(293)
(49)
(236)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Channel
Style
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

6186
12763
5464
12135
4300
11087
2703
9620
1730
7734
1201
5571
883**
4093
676**
3134
534**
2476
–
2006**

(27516)
(56772)

2586
4060
2254
3857
1816
3549
1341
3169
995
2745
763
2291
603
1913
487
1616
401
1380
336
1190

(11503)
(18060)

6284
12835
5763
12420
5043
11728
3920
10759
2621
9514
1820
7992
1337
6200
1024**
4747
809**
3751
655**
3038

(27952)
(57093)

6032
12645
4968
11663
3076
10026
1730
7734
1107**
5134
769**
3566
565**
2620
–
2006**
–
1585**
–
1284**

(26831)
(56248)

5857
12501
4300
11087
2136
8729
1201
5571
769**
3566
534**
2476
–
1819**
–
1393**
–
1100**
–
–

(26053)
(55607)

(24305)
(53979)
(19127)
(49317)
(12023)
(42792)
(7695)
(34402)
(5342)
(24781)
(3928)
(18206)
(3007)
(13941)
(2375)
(11014)
–
(8923)

(10026)
(17157)
(8078)
(15787)
(5965)
(14096)
(4426)
(12210)
(3394)
(10191)
(2682)
(8509)
(2166)
(7188)
(1784)
(6138)
(1494)
(5293)

(25635)
(55247)
(22432)
(52169)
(17437)
(47858)
(11659)
(42320)
(8096)
(35550)
(5947)
(27579)
(4555)
(21116)
(3598)
(16685)
(2913)
(13513)

(22099)
(51879)
(13683)
(44598)
(7695)
(34402)
(4924)
(22837)
(3420)
(15862)
(2513)
(11654)
–
(8923)
–
(7050)
–
(5711)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

35

(19127)
(49317)
(9501)
(38828)
(5342)
(24781)
(3420)
(15862)

(2375)
(11014)
–
(8091)
–
(6196)
–
(4893)
–
–

Channel & Combinations

12

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

B56 Channel & Combinations
B56
• Thickness: 16 Gauge (1.5 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized
• Weight: .85 Lbs./Ft. (1.26 kg/m)

15/8”
(41.3)
7/8”
(22.2)

3/8”
(9.5)

3/8”
(9.5)
9/32”

Y

13/16”
(20.6)

X

(7.1)
.3706
(9.4)

X
Y

27/64”

13/16”

(10.7)

Channel & Combinations

(20.6)

X - X Axis

SECTION PROPERTIES

Channel
B56
B56A

Weight
lbs./ft.

kg/m

.894
1.789

(1.33)
(2.66)

Areas of
Section
sq. in. cm2

.263
.526

Moment of
Inertia (I)
in.4

cm4

(1.70) .0241 (1.00)
(3.39) .1205 (5.02)

Section
Modulus (S)
in.3

Y - Y Axis
Radius of
Gyration (r)

cm3

.0546 (.89)
.1484 (2.43)

in.

cm

.303
.479

(.77)
(1.22)

Moment of
Section
Inertia (I) Modulus (S)
in.4

cm4

in.3

.0966 (4.02) .1189
.1931 (8.04) .2377

Radius of
Gyration (r)

cm3

in.

cm

(1.95)

.606
.606

(1.54)

(3.89)

(1.54)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

Y
Y
Y
X

15/8”
(41.3)

X

27/16”
(61.9)

X

31/4”
(82.5)

X

X

X
13/16”
(20.6)

Y

13/16”
(20.6)

15/8”

1.207
(30.7)

Y

13/16”

Y

15/8”
(41.3)

13/16”

(20.6)

15/8”

(41.3)

(20.6)

(41.3)

15/8”
(41.3)

B56A

B56B3

B56B4

Wt. 1.70 Lbs./Ft. (2.53 kg/m)

Wt. 2.55 Lbs./Ft. (3.79 kg/m)

Wt. 3.40 Lbs./Ft. (5.06 kg/m)

Reference page 14 for general fitting and standard finish specifications.

36

B56 Beam & Column Loading Data
BEAM LOADING
Beam Span
mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A

610
610*
405
610*
270
610*
202
530
162
424
135
353
116
303
101
265
90
236
81
212

(2713)
(2713)

.027
.004
.109
.035
.245
.121
.435
.250
.680
.391
.980
.563
1.334
.766
1.742
1.001
2.205
1.267
2.722
1.564

(.68)
(.10)

610
610*
372
610*
165
610*
93
423
59
271
41
188
30
138
23
106
18
84
15
68

(2713)
(2713)

610
610*
248
610*
110
502
62
282
40
181
28
125
20
92
15
71
12
56
10
45

(2713)
(2713)

(1801)
(2713)
(1201)
(2713)
(898)
(2357)
(720)
(1886)
(600)
(1570)
(516)
(1348)
(449)
(1179)
(400)
(1050)
(360)
(943)

(2.77)
(.89)
(6.22)
(3.07)
(11.05)
(6.35)
(17.27)
(9.93)
(24.89)
(14.30)
(33.88)
(19.45)
(44.24)
(25.42)
(56.01)
(32.18)
(69.14)
(39.72)

(1655)
(2713)
(734)
(2713)
(413)
(1881)
(262)
(1205)
(182)
(836)
(133)
(614)
(102)
(471)
(80)
(373)
(67)
(302)

(1103)
(2713)
(489)
(2233)
(276)
(1699)
(178)
(805)
(124)
(556)
(89)
(409)
(67)
(316)
(53)
(249)
(44)
(200)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

84

(2133)

96

(2438)

108

(2743)

120

(3048)

Channel
Style
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

4968
10237
4367
9762
3572
8969
2335
7860
1495
6434
1038
4731
763**
3476
584**
2661
461**
2103
–
1703**

(22099)
(45536)

2182
3365
1903
3202
1557
2955
1164
2649
862
2307
661
1937
522
1619
422
1368
348
1169
291
1008

(9706)
(14968)

5044
10291
4624
9977
4034
9454
3290
8722
2264
7780
1572
6629
1155
5269
884**
4031
699**
3185
566**
2580

(22437)
(45776)

4845
10148
3985
9405
2658
8167
1495
6434
957
4360
664**
3028
488**
2224
–
1703**
–
1346**
–
1090**

(21551)
(45140)

4702
10039
3572
8969
1845
7186
1038
4731
664**
3028
461**
2103
–
1545**
–
1183**
–
934**
–
–

(20915)
(44655)

(19425)
(43423)
(15889)
(39896)
(10386)
(34963)
(6650)
(28620)
(4617)
(21044)
(3394)
(15462)
(2598)
(11837)
(2050)
(9354)
–
(7575)

(8465)
(14243)
(6926)
(13144)
(5178)
(11783)
(3834)
(10262)
(2940)
(8616)
(2322)
(7201)
(1877)
(6085)
(1548)
(5200)
(1294)
(4484)

(20568)
(44380)
(17944)
(42053)
(14634)
(38797)
(10071)
(34607)
(6992)
(29487)
(5137)
(23437)
(3932)
(17931)
(3109)
(14167)
(2417)
(11476)

(17726)
(41835)
(11823)
(36328)
(6650)
(28620)
(4257)
(19394)
(2953)
(13469)
(2171)
(9893)
–
(7575)
–
(5987)
–
(4848)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 14 for general fitting and standard finish specifications.

37

(15889)
(39896)
(8207)
(31965)
(4617)
(21044)
(2953)
(13469)

(2050)
(9354)
–
(6872)
–
(5262)
–
(4154)
–
–

Channel & Combinations

In.

Channel

Telescoping Channel
BTS22TH
• Can be secured at any point of system
• Order BTS22TH & B22TH separately
• Thickness: 12 Gauge (1.5 mm)
• Standard lengths: 10’ (3.05 m)
• Standard finishes: Dura-Green, Yellow Zinc Dichromate,
Hot-Dipped Galvanized

Slip Load Data
Resistance to slip*
3600 lbs.

Resistance to slip*
700 lbs.

Channel & Combinations

1/4”

thick 2-hole
fitting with (2)
1/2” bolts &
channel nuts.
Typical of many
standard fittings.

1/2”

bolt
& nut

*With a safety factor of 3

BTS22TH
TELESCOPING STRUT
Fits over all 15/8” x 15/8” channels 9/16” holes on 17/8” centers 12 gauge material thickness
Section Properties
Weight Area
Channel
2
lbs./ft.

BTS22TH

1.934

In

Cx

X-X Axis
Ix
Sx

In

In4

In3

rx
In

0.4578 1.0009 0.2525 0.2523 0.7426

Cy

Y-Y Axis
Iy
Sy

In

In4

In3

7/8”

ry
In

Y Cy
Cx

17/8”

X

X

CL

0.9375 0.2757 0.2941 0.7761

Y
17/8”

Section properties are based on nominal metal thickness, and overall dimensions.

B22TH
THREE HOLE STRUT
9/16”

holes on 17/8” centers 12 gauge material thickness

Section Properties
Weight Area
Channel
2
lbs./ft.

B22TH

1.760

In

Cx

X-X Axis
Ix
Sx

In

In4

In3

Y Cy

rx
In

Cy

Y-Y Axis
Iy
Sy

In

In4

In3

7/8”

ry
In

Cx
15/8”

X

0.3863 0.8245 0.1596 0.1936 0.6400 0.8125 0.1719 0.2116 0.6642

CL

Y
15/8”

Section properties are based on nominal metal thickness, and overall dimensions.

COMBINATION OF BTS22TH & B22TH

X

Y

Cy

7/8”

X-X Axis
Section Properties
Channel
Weight Area
Cx
Ix
Sx
rx
In2
In4
Combination
lbs./ft.
In
In3
In
BTS22TH/B22TH 3.597 0.8474 0.9773 0.4126 0.4222 0.6978

Cy

Y-Y Axis
Iy
Sy

ry

In

In4

In

In3

0.9375 0.4476 0.4774 0.7268

Section properties are based on nominal metal thickness, and overall dimensions.

Reference page 14 for general fitting and standard finish specifications.

38

Cx
17/8”
X

CL

Y
17/8”

X

Telescoping Channel
BEAM LOADING DATA
B22TH
Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load
Span
Load
Deflection
@ Deflection=
in
lbs*
in
1/240 Span
12
24
36
48
60
72
84
96
108
120

2225
1610
1071
800
637
528
449
390
344
306

0.015
0.061
0.136
0.243
0.379
0.546
0.743
0.970
1.228
1.516

Beam
Span

3225
1610
1071
658
417
286
206
153
116
90

B22TH

BTS22TH

12
24
36
48
60
72
84
96
108
120

4203
2099
1396
1044
831
689
587
510
450
401

0.012
0.050
0.112
0.200
0.312
0.450
0.612
0.799
1.012
1.249

Beam
Span

4203
2099
1396
1044
664
456
330
248
190
149

BTS22TH

BTS22TH & B22TH
TELESCOPING MEMBERS OF EQUAL LENGTH
Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load
Span
Load
Deflection
@ Deflection=
in
lbs*
in
1/240 Span
12
24
36
48
60
72
84
96
108
120

7033
3511
2335
1745
1389
1151
980
851
749
668

0.013
0.051
0.115
0.205
0.320
0.460
0.627
0.819
1.036
1.279

Beam
Span

7033
3511
2335
1705
1082
742
536
401
307
239

BTS22TH & B22TH

*Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) with adequate lateral bracing (see page 11 for
further explanation). To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8.

Reference page 14 for general fitting and standard finish specifications.

39

Channel & Combinations

Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load
Span
Load
Deflection
@ Deflection=
in
lbs*
in
1/240 Span

Channel Hole Patterns
B11SH THRU B56SH
SH TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart
Height H
Part No.
B11SH
B12SH
B22SH
B24SH
B26SH
B32SH
B42SH
B52SH
B54SH
B56SH

Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)

In.

31/4”
27/16”
15/8”
15/8”
15/8”
13/8”
1”
13/16”
13/16”
13/16”

mm
(82.5)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)

Weight
Lbs./Ft.

kg/m

2.97
2.39
1.82
1.34
1.07
1.62
1.36
1.19
.91
.80

(4.42)
(3.55)
(2.71)
(1.99)

2”

(50.8)
Typ.

(1.59)
(2.41)

9/16”

x 11/8”

(14.3)

Slots
(28.6)

(2.02)
(1.77)

H

(1.35)
(1.19)

B11S THRU B56S
S TYPE CHANNEL
Channel & Combinations

• For beam loads use 90% of Channel Loading Chart
Height H
Part No.
B11S
B12S
B22S
B24S
B26S
B32S
B42S
B52S
B54S
B56S

Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)

Weight

In.

mm

Lbs./Ft.

kg/m

31/4”
27/16”
15/8”
15/8”
15/8”
13/8”
1”
13/16”
13/16”
13/16”

(82.5)

2.94
2.36
1.79
1.32
1.06
1.59
1.33
1.16
.89
.79

(4.37)

(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)

(3.51)

4”

(2.66)
(1.96)

(101.6)
Typ.

(1.58)

13/32” x

3” Slots

(2.36)

(10.3)

(76.2)

(1.98)
(1.72)

H

(1.32)
(1.17)

B11H17/8 THRU B56H17/8
H17/8 TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart
Height H
Part No.
B11H17/8
B12H17/8
B22H17/8
B24H17/8
B26H17/8
B32H17/8
B42H17/8
B52H17/8
B54H17/8
B56H17/8

Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)

Weight

In.

mm

Lbs./Ft.

kg/m

31/4”

(82.5)
(61.9)

3.00
2.42
1.85
1.36
1.09
1.65
1.39
1.22
.93
.82

(4.46)

27/16”
15/8”
15/8”
15/8”
13/8”
1”
13/16”
13/16”
13/16”

(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)

(3.60)
(2.75)
(2.02)

17/8”

(47.6)
Typ.

(1.62)
(2.45)
(2.07)
(1.81)

H

(1.38)
(1.22)

Reference page 14 for general fitting and standard finish specifications.

40

9/16” Dia. Holes
(14.3)

Channel Hole Patterns
B22TH
(TH TYPE CHANNEL)

9/16” Dia. Holes
(14.3)

• For beam loads use 90% of Channel Loading Chart
Height H
Part No.
Thickness
B22TH
12 Ga. (2.6)

In.

mm

15/8”

(41.3)

Weight
Lbs./Ft.

1.76

kg/m
(2.62)

17/8”

Typ.
(47.6)

15/16”

H

(23.8)

13/16”
(20.6)

B11KO6 THRU B56KO6
(KO6 TYPE KNOCKOUT CHANNEL)
• For beam loads use 90% of Channel Loading Chart

Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)

In.

mm

31/4”
27/16”
15/8”
15/8”
15/8”
13/8”
1”
13/16”
13/16”
13/16”

(82.5)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)

Channel & Combinations

Height H
Part No.
B11KO6
B12KO6
B22KO6
B24KO6
B26KO6
B32KO6
B42KO6
B52KO6
B54KO6
B56KO6

Weight
Lbs./Ft.

kg/m

3.05
2.47
1.90
1.40
1.12
1.70
1.44
1.27
.97
.85

(4.54)
(3.67)

6”

Typ.
(152.4)

(2.83)
(2.08)
(1.66)

3”

Typ.
(76.2)

(2.53)
(2.14)
(1.89)

7/8” Dia. K.O.

H

(22.2)

(1.44)
(1.26)

B22SHA
(BACK TO BACK SH TYPE CHANNEL)
• For beam loads use 90% of Channel Loading Chart

9/16”

(14.3)

Height H

x 11/8”

Slots

(28.6)

Weight

Part No.
Thickness
B22SHA 12 Ga. (2.6)

In.

mm

31/4”

(82.5)

3.64

(5.42)

B52SHA 12 Ga. (2.6)

15/8”

(41.3)

2.38

(1.77)

B54SHA 14 Ga. (1.9)

15/8”

(41.3)

1.82

(1.35)

Lbs./Ft.

kg/m

2”

Typ.
(50.8)

H

Reference page 14 for general fitting and standard finish specifications.

41

Channel Hole Patterns
B11S58 THRU B56S58
S58 TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart

Part No.
B11S58
B12S58
B22S58
B24S58
B26S58
B32S58
B42S58
B52S58
B54S58
B56S58

Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)

Height H
In.
mm
1
3 /4”
(82.5)
27/16” (61.9)
15/8”
(41.3)
15/8”
(41.3)
15/8”
(41.3)
13/8”
(34.9)
1”
(25.4)
13/16”
(20.6)
13/16”
(20.6)
13/16”
(20.6)

13/8”

(34.9)
Typ.

Weight
Lbs./Ft. kg/m
2.94
(4.37)
2.36
(3.51)
1.79
(2.66)
1.32
(1.96)
1.06
(1.58)
1.59
(2.36)
1.33
(1.98)
1.16
(1.72)
.89
(1.32)
.79
(1.17)

11/16”
(101.6)

x 25/8”
(17.5) x (66.7)
Slots

11/16”

H

Channel & Combinations

B22M THRU B54M
M (MARINE RUNG) TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart
Height H
Part No.
B22M
B24M
B32M
B42M
B44M
B52M
B54M

Thickness
12 Ga. (2.6)
14 Ga. (1.9)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
12 Ga. (2.6)
14 Ga. (1.9)

Weight

In.

mm

Lbs./Ft.

kg/m

15/8”
15/8”
13/8”
1”
1”
13/16”
13/16”

(41.3)

1.79
1.32
1.59
1.33
0.98
1.16
.89

(2.66)

(41.3)
(34.9)
(25.4)
(25.4)
(20.6)
(20.6)

1”
(25.4)

(1.96)

x 11/16”
(6.3) x (17.5)
Slots

1/4”

(2.36)
(1.98)
(1.46)
(1.72)

1/2”

1/2”

(38.1)

(38.1)

6”

(1.32)

(152.4)

H

B22H25 THRU B56H25
H25 TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart
Height H
Part No.
B22H25
B24H25
B26H25
B32H25
B42H25
B52H25
B54H25
B56H25

Thickness
12
14
16
12
12
12
14
16

Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.

Weight

In.

mm

Lbs./Ft.

kg/m

(2.6)

15/8”

(41.3)

15/8”
15/8”
13/8”
1”
13/16”
13/16”
13/16”

(41.3)

1.85
1.36
1.09
1.65
1.39
1.22
.93
.82

(2.75)

(1.9)
(1.5)
(2.6)
(2.6)
(2.6)
(1.9)
(1.5)

(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)

(2.02)

2”

(1.62)

(50.8)

(2.45)
(2.07)

1”

(1.81)

(25.4)

(1.38)
(1.22)

H

Reference page 14 for general fitting and standard finish specifications.

42

9/32” Dia. Holes
(7.1)

Channel & Combinations - Notes

Channel & Combinations

43

Channel Nuts & Hardware
Channel Nuts

Cooper B-Line’s channel nut is one of the main
components of our metal framing system. It is
designed to provide essential gripping power and
ease during installation. Channel nuts are press
formed, machined and hardened from steel which
meets the requirements of ASTM A108 or
ASTM A36 for our larger sizes.

Bolts, Screws, and Nuts

All bolts, screws and nuts meet the physical and
chemical requirements of ASTM A307, SAE J429
or ASTM A563, and have unified inch screw
threads (coarse, UNC). ISO metric threads are
also available on special request.

Recommended Torque
Bolt Size
Foot/Lbs.
Nm

1/4”-20

5/16”-18

Bolt Size
NM

M6x1
12

M8 x1.25
17

Foot/Lbs.

6
8

9

11
15

13

3/8”-16

19
26

1/2”-13

50
68

M10 x 1.5 M12x1.75
36
62
27

46

Channel Nuts & Hardware

Materials & Finishes*
Finish
Code

Finish

PLN

Plain

ZN
CZ
HDG
SS4
SS6
AL

Electro-Plated Zinc
Chromium Zinc
Hot-Dipped Galvanized
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum

Specification
ASTM A108/A307 Gr. A,
ASTM A563, SAE J429
ASTM B633 SC1 Type III
ASTM F1136 Gr. 3
ASTM A153
ASTM F593
MPIF 35/ASTM F593
ASTM F468 S4

*Unless otherwise noted.
Note: Channel nuts are not available in HDG or Aluminum

Metric

Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

44

Channel Nuts & Hardware
STANDARD CHANNEL NUTS
Numbering Example:

Nut Type
N = Standard Nut
TN = Twirl Nut
SN = Stud Nut
STN = Stud Twirl Nut
NW = Combo Nut
Washer

N 7 25 (*) WO

Channel Type
7 = Tall Channels
B11
B12
2 = Medium Channels
B22
B24
B26
B32
5 = Short Channels
B42
B52
B54
B56

Thread Size
21 = #8-32
22 = #10-24
27 = #10-32
24 = 1/4-20
23 = 5/16-18
28 = 3/8-16
26 = 7/16-14
25 = 1/2-13
55 = 5/8-11
75 = 5/8-11
78 = 7/8-9

Stud Length
* = Specify Length
of stud below
for Stud Nut or
Twirl Stud Nuts
3/4 = 3/4”
1 = 1”
11/4 = 11/4”
11/2 = 11/2”

Suffix
WO = Without Spring
** = Twirl Nuts or nuts
with springs have
blank suffix

METRIC CHANNEL NUTS
Numbering Example: BMS 6 M
Nut
Metric
Type
Thread Size
BMS = Spring Nut
3 = M3.5
4 = M4
BMS-D = Spring Nut (1/2” thick)
BMT = Twirl Nut
5 = M5
6 = M6
BMT-D = Twirl Nut (1/2” thick)
BMM = Spring Nut (Mini channel) 8 = M8
10 = M10
12 = M12

S = Short Spring
M = Medium Spring
L = Long Spring
* = Twirl Nuts and nuts
without springs have
blank suffix

NUT WITHOUT SPRING

STUD NUT WITH SPRING

TWIRL-NUT™

STUD NUT WITHOUT SPRING

COMBO NUT WASHER

TWIRL STUD NUT

Reference page 44 for general fitting and standard finish specifications.

45

Channel Nuts & Hardware

SPRING NUT

Suffix

Channel Nuts

Note: See page 50 for resistance to
slip & page 51 for pull-out strength.

NUT WITHOUT SPRING
Part No.

Thread Size

N221WO
N227WO
N222WO
N224WO
N223WO
N228WO
N226WO
N225WO
N525WO
N255WO
N555WO
N275WO
N575WO
N278WO

Fits Channel Sizes

Nut Thickness

#8-32
#10-32
#10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
1/2-13
5/8-11
5/8-11
3/4-10
3/4-10
7/8-9

All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
B11, B12, B22, B24, B26, B32
B42, B52, B54, B56
B11, B12, B22, B24, B26, B32
B42, B52, B54, B56
B11, B12, B22, B24, B26, B32
B42, B52, B54, B56
B11, B12, B22, B24, B26, B32

1/4”

(6.3)

1/4”

(6.3)

1/4”

(6.3)

1/4”

(6.3)

1/4”

(6.3)

3/8”

(9.5)

M6 x 1
M8 x 1.25
M10 x 1.5
M12 x 1.75
M12 x 1.75

All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
B11, B12, B22, B24, B26, B32

3/8”

(9.5)

1/2”

(12.7)

3/8”

(9.5)

1/2”

(12.7)

3/8”

(9.5)

1/2”

(12.7)

3/8”

(9.5)

1/2”

(12.7)

1/4”

(6.3)

1/4”

(6.3)

3/8”

(9.5)

3/8”

(9.5)

1/2”

(12.7)

Wt./C
Lbs.

kg

7.0
7.0
7.0
6.7
6.7
9.3
8.8
11.6
8.8
16.4
10.2
14.5
8.8
12.5

(3.17)

6.9
6.7
9.6
9.2
12.2

(3.13)

(3.17)
(3.17)
(3.04)
(3.04)
(4.22)
(3.99)
(5.26)
(3.99)
(7.44)
(4.62)
(6.58)
(3.99)
(5.67)

Channel Nuts & Hardware

Metric Threads
BMS-6
BMS-8
BMS-10
BMS-12
BMS-D-12

Note: For mini channel nut information see page 203.

Reference page 44 for general fitting and standard finish specifications.

46

(3.04)
(4.35)
(4.17)
(5.53)

Channel Nuts

Note: See page 50 for resistance to
slip & page 51 for pull-out strength.

700
Series

200
Series

500
Series

SPRING NUT
Part No.

Thread Size

Metric Threads
BMS-6L
BMS-6M
BMS-6S
BMS-8L
BMS-8M
BMS-8S
BMS-10L
BMS-10M
BMS-10S
BMS-12M
BMS-12S
BMS-D-12L
BMS-D-12M

Nut Thickness

#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
7/16-14
7/16-14
7/16-14
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9

B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32

1/4”

M6 x 1
M6 x 1
M6 x 1
M8 x 1.25
M8 x 1.25
M8 x 1.25
M10 x 1.5
M10 x 1.5
M10 x 1.5
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75

B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32
B42, B52, B54, B56
B22, B24, B26, B32
B42, B52, B54, B56
B11 & B12
B22, B24, B26, B32

1/4”

1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
3/8”
1/2”
1/2”
3/8”
1/2”
1/2”
3/8”
1/2”
1/2”

1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”

kg

(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(9.5)
(9.5)
(9.5)
(9.5)
(9.5)
(9.5)
(12.7)
(12.7)
(9.5)
(12.7)
(12.7)
(9.5)
(12.7)
(12.7)
(9.5)
(12.7)
(12.7)

7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
6.7
6.7
6.7
6.7
6.7
6.7
9.3
9.3
9.3
8.8
8.8
8.8
11.6
11.6
8.8
16.4
16.4
10.2
14.5
14.5
8.8
12.5
12.5

(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.04)
(3.04)
(3.04)
(3.04)
(3.04)
(3.04)
(4.22)
(4.22)
(4.22)
(3.99)
(3.99)
(3.99)
(5.26)
(5.26)
(3.99)
(7.44)
(7.44)
(4.62)
(6.58)
(6.58)
(3.99)
(5.67)
(5.67)

(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(9.5)
(9.5)
(9.5)
(9.5)
(9.5)
(12.7)
(12.7)

6.9
6.9
6.9
6.7
6.7
6.7
9.6
9.6
9.6
9.2
9.2
12.2
12.2

(3.13)
(3.13)
(3.13)
(3.04)
(3.04)
(3.04)
(4.35)
(4.35)
(4.35)
(4.17)
(4.17)
(5.53)
(5.53)

Note: For mini channel nut information see page 203.
Reference page 44 for general fitting and standard finish specifications.

47

Wt./C
Lbs.

Channel Nuts & Hardware

N721
N221
N521
N727
N227
N527
N722
N222
N522
N724
N224
N524
N723
N223
N523
N728
N228
N528
N726
N226
N526
N725
N225
N525
N755
N255
N555
N775
N275
N575
N778
N278

Fits Channel Sizes

Channel Nuts
Note: See page 50 for resistance to
slip & page 51 for pull-out strength.

TWIRL-NUT™ Patented
Part No.
TN221
TN227
TN222
TN224
TN223
TN228
TN226
TN225
TN525
TN255

Metric
Threads

BMT-6
BMT-8
BMT-10
BMT-12
BMT-D-12

Thread Size
#8-32
#10-32
#10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
1/2-13
5/8-11
M6 x 1
M8 x 1.25
M10 x 1.5
M12 x 1.75
M12 x 1.75

Fits Channel Sizes

Nut Thickness

All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
B11, B12, B22, B24, B26, B32
B42, B52, B54, B56
B11, B12, B22, B24, B26, B32

1/4”

(6.3)

1/4”

(6.3)

1/4”

(6.3)

1/4”

(6.3)

1/4”

(6.3)

3/8”

(9.5)

3/8”
1/2”

(9.5)
(12.7)

3/8”

(9.5)

1/2”

(12.7)

All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
All sizes except B62 & B72
B11, B12, B22, B24, B26, B32

1/4”
1/4”

(6.3)

3/8”

(9.5)

3/8”

(9.5)

1/2”

(12.7)

(6.3)

Wt./C
Lbs.

kg

7.0
7.0
7.0
6.7
6.7
9.3
8.8
11.6
8.8
11.0

(3.17)

6.9
6.7
9.6
9.2
12.2

(3.13)

(3.17)
(3.17)
(3.04)
(3.04)
(4.22)
(3.99)
(5.26)
(3.99)
(4.99)

(3.04)
(4.35)
(4.17)
(5.53)

Note: See page 50 for resistance to
slip & page 51 for pull-out strength.

TWIRL STUD NUT
Channel Nuts & Hardware

Part No.

Thread Size

STN224-*

1/4-20

STN228-*

3/8-16

Fits Channel Sizes

Nut Thickness

Wt./C
Lbs.

kg

All sizes except B62 & B72

1/4”

(6.3)

8.1

(3.66)

All sizes except B62 & B72

3/8”

(9.5)

12.9

(5.85)

STN225-*

1/2-13

B11, B12, B22, B24, B26, B32

1/2”

(12.7)

18.2

(8.23)

STN525-*

1/2-13

B42, B52, B54, B56

3/8”

(9.5)

15.4

(6.96)

*Note: Add stud length in inches (3/4, 1, 11/4, 11/2)

Note: See page 50 for resistance to
slip& page 51 for pull-out strength.

STUD NUT WITHOUT SPRING
Part No.

Thread Size

SN224-*WO

1/4-20

SN228-*WO

3/8-16

Fits Channel Sizes

Nut Thickness

Wt./C
Lbs.

kg

All sizes except B62 & B72

1/4”

(6.3)

8.1

(3.66)

All sizes except B62 & B72

3/8”

(9.5)

12.9

(5.85)

SN225-*WO

1/2-13

B11, B12, B22, B24, B26, B32

1/2”

(12.7)

18.2

(8.23)

SN525-*WO

1/2-13

B42, B52, B54, B56

3/8”

(9.5)

15.4

(6.96)

*Note: Add stud length in inches (3/4, 1, 11/4, 11/2)
Reference page 44 for general fitting and standard finish specifications.

48

Channel Nuts

Note: See page 50 for resistance to
slip & page 51 for pull-out strength.

700
Series

200
Series

500
Series

STUD NUT WITH SPRING
Part No.

Thread Size

SN724-*

1/4-20

SN224-*

1/4-20

Fits Channel Sizes

Nut Thickness

Wt./C
Lbs.

kg

B11 & B12

1/4”

(6.3)

8.1

(3.66)

B22, B24, B26, B32

1/4”

(6.3)

8.1

(3.66)

SN524-*

1/4-20

B42, B52, B54, B56

1/4”

(6.3)

8.1

(3.66)

SN728-*

3/8-16

B11 & B12

3/8”

(9.5)

12.9

(5.85)

SN228-*

3/8-16

B22, B24, B26, B32

3/8”

(9.5)

12.9

(5.85)

SN528-*

3/8-16

B42, B52, B54, B56

3/8”

(9.5)

12.9

(5.85)

SN725-*

1/2-13

B11 & B12

1/2”

(12.7)

18.2

(8.23)

SN225-*

1/2-13

B22, B24, B26, B32

1/2”

(12.7)

18.2

(8.23)

SN525-*

1/2-13

B42, B52, B54, B56

3/8”

(9.5)

15.4

(6.96)

*Note: Add stud length in inches

(3/4,

1,

11/4,

11/2)

Note: See page 50 for resistance to slip
& page 51 for pull-out strength.

Patent Number
7,604,444

COMBO NUT WASHER
Part No.

Thread Size

NW524

1/4-20

NW528

3/8-16

NW525

1/2-13

NWM6
NWM8
NWM10
NWM12

M6
M8
M10
M12

Fits Channel Sizes

Nut Thickness

Wt./C
Lbs.

kg

All Channel Sizes

1/4”

(6.3)

11.9

(5.40)

All Channel Sizes

3/8”

(9.5)

13.8

(6.26)

All Channel Sizes

3/8”

(9.5)

13.1

(5.94)

All Channel Sizes

1/4”

(6.3)

16.6

(7.50)

All Channel Sizes

3/8”

(9.5)

15.4

(7.00)

All Channel Sizes

1/4”

(6.3)

18.9

(8.57)

All Channel Sizes

3/8”

(9.5)

17.7

(8.00)

Reference page 44 for general fitting and standard finish specifications.

49

Channel Nuts & Hardware

• Finish: Electrodeposited zinc ASTM B633 SC1
• Available in 316 stainless steel - add SS6 to part number
• To lock combo nut washer in place a nex nut (sold separately) is required

Channel Nuts
RESISTANCE TO SLIP
• With Safety Factor of 3
Resistance to Slip
Thread
Size

Nut Part
Numbers

12 ga. Channel
Lbs.

16 ga. Channel

Lbs.

N

Lbs.

N

N221, N221WO,N521, N721, TN221

50

220

50

220

50

220

#10-24

N222, N222WO, N522, N722, TN222

100

440

100

440

100

440

#10-32

N227, N227WO, N527, N727, TN227

100

440

100

440

100

440

1/4”-20

NW524*, N224, N224WO, N524, N724,
TN224, STN224, SN224WO, SN224,
SN524, SN724

300

1330

300

1330

300

1330

5/16”-18

N223, N223WO, N523, N723, TN223

450

2000

450

2000

450

2000

3/8”-16

NW528*, N228, N228WO, N528, N728
TN228, STN228, SN228WO, SN228,
SN528, SN728

800

3560

600

2670

600

2670

7/16”-14

N226, N226WO, N526, N726, TN226

1000

4450

800

3560

800

3560

N225, N225WO, N725, TN225,
STN225, SN225WO, SN225, SN725

1500

6670

1000

4450

1000

4450

NW525*, N525, N525WO, TN525,
STN525, SN525WO, SN525

1500

6670

1000

4450

1000

4450

N255, N255WO, N755, TN255
N555, N555WO
N275, N275WO, N775
N575, N575WO

1500
1500
1500
1500

6670
6670
6670
6670

1000
1000
1000
1000

4450
4450
4450
4450

1000
1000
1000
1000

4450
4450
4450
4450

7/8”-9

N278, N278WO, N778

1500

6670

1000

4450

1000

4450

M6 x 1

BMS-6, BMS-6L, BMS-6M,
BMS-6S, BMT-6

300

1330

300

1330

300

1330

M8 x 1.25

BMS-8, BMS-8L, BMS-8M,
BMS-8S, BMT-8

450

2000

450

2000

450

2000

M10 x 1.50

BMS-10, BMS-10L, BMS-10M,
BMS-10S, BMT-20

800

3560

600

2760

600

2760

BMS-D-12, BMS-D-12L,
BMS-D-12M, BMT-D-12

1500

6670

1000

4450

1000

4450

BMS-12, BMS-12M, BMS-12S, BMT-12

1500

6670

1000

4450

1000

4450

5/8”-11
3/4”-10

Metric Threads

14 ga. Channel

#8-32

1/2”-13

Channel Nuts & Hardware

N

M12 x 1.75

* Combo Nut Washer (see page 49)

Resistance to Slip
of Channel Nut
Note: For mini channel nut information see page 203.

Reference page 44 for general fitting and standard finish specifications.

50

Channel Nuts
PULL-OUT STRENGTH
• With Safety Factor of 3
• Maximum pullout strength for B11 & B12 channels is limited to 1500 lbs. (6670 N).
Pull-Out Strength
Thread
Size

Nut Part
Numbers

12 ga. Channel

14 ga. Channel

16 ga. Channel

Lbs.

N

Lbs.

N

Lbs.

N

200

890

200

890

200

890

#10-24

N222, N222WO, N522, N722, TN222

250

1110

250

1110

250

1110

#10-32

N227, N227WO, N527, N727, TN227

250

1110

250

1110

250

1110

1/4”-20

NW524*, N224,N224WO, N524, N724,
TN224, STN224, SN224WO, SN224,
SN524, SN724

450

2000

450

2000

450

2000

5/16”-18

N223, N223WO, N523, N723, TN223

750

3330

750

3330

750

3330

3/8”-16

NW528*, N228, N228WO, N528, N728
TN228, STN228, SN228WO, SN228,
SN528, SN728

1100

4890

1000

4450

1000

4450

7/16”-14

N226, N226WO, N526, N726, TN226

1500

6670

1200

5340

1000

4450

N225, N225WO, N725, TN225,
STN225, SN225WO, SN225, SN725

2000

8900

1400

6230

1000

4450

NW525*, N525, N525WO, TN525,
STN525, SN525WO, SN525

1500

6670

1400

6230

1000

4450

N255, N255WO, N755, TN255
N555, N555WO
N275, N275WO, N775
N575, N575WO

2000
1500
2000
1500

8900
6670
8900
6670

1400
1400
1400
1400

6230
6230
6230
6230

1000
1000
1000
1000

4450
4450
4450
4450

7/8”-9

N278, N278WO, N778

1500

6670

1400

6230

1000

4450

M6 x 1

BMS-6, BMS-6L, BMS-6M,
BMS-6S, BMT-6

450

2000

450

2000

450

2000

M8 x 1.25

BMS-8, BMS-8L, BMS-8M,
BMS-8S, BMT-8

750

3330

750

3330

750

3330

M10 x 1.50

BMS-10, BMS-10L, BMS-10M,
BMS-10S, BMT-20

1100

4890

1000

4450

1000

4450

BMS-D-12, BMS-D-12L,
BMS-D-12M, BMT-D-12

2000

8900

1400

6230

1000

4450

BMS-12, BMS-12M, BMS-12S, BMT-12

1500

6670

1400

6230

1000

4450

1/2”-13

5/8”-11
3/4”-10

M12 x 1.75

* Combo Nut Washer (see page 49)

Pull-Out Strength of
Channel Nut

Note: For mini channel nut
information see page 203.

Reference page 44 for general fitting and standard finish specifications.

51

Metric Threads

N221, N221WO,N521, N721, TN221

Channel Nuts & Hardware

#8-32

Hardware
DCN 3/8
DOUBLE CONVEYOR NUT
• Recommended torque - 19 ft./Lbs.
• Allowable slip loading - 700 Lbs.(3.11kN)
• Safety Factor of 3
• Material: ASTM 1011SS Gr. 33
• Finish: Electrodeposited zinc ASTM B633 SC1
• Strut ordered separately

2”
(50.8)

3”
(76.2)

13/8”
(34.9)

B501 SERIES
U-BOLT

Hex Nuts
Included

D
Thread
Size

A

• Designed for use with Rigid Conduit or Iron Pipe
• Dimension “C” is dependent on the type of pipe
or conduit supported and is a reference only

C

B

Design Load

Channel Nuts & Hardware

Part No.
B501-1/2
B501-3/4
B501-1
B501-11/4
B501-11/2
B501-2
B501-21/2
B501-3
B501-31/2
B501-4
B501-5
B501-6
B501-8

A

B

15/16”

(23.8)

11/8”
13/8”
123/32”
2”
27/16”
215/16”
39/16”
43/32”
419/32”
521/32”
63/4”
83/4”

(28.6)
(29.9)
(43.6)
(50.8)
(61.9)
(74.6)
(90.5)
(94.6)
(116.7)
(143.6)
(171.4)
(222.2)

13/4”
13/4”
17/8”
13/4”
13/4”
21/16”
21/16”
2”
2”
1
2 /4”
21/4”
25/8”
25/8”

C
(44.4)
(44.4)
(47.6)
(44.4)
(44.4)
(52.4)
(52.4)
(50.8)
(50.8)
(57.1)
(57.1)
(66.7)
(66.7)

11/2”
15/8”
15/8”
115/32”
17/16”
17/8”
113/16”
13/4”
123/32”
121/32”
2”
23/8”
23/8”

D
(38.1)

5/16”-18

(41.3)

5/16”-18

(41.3)

5/16”-18

(37.3)

5/16”-18

(36.5)

5/16”-18

(47.6)

3/8”-16

(46.0)

3/8”-16

(44.4)

3/8”-16

(43.6)

3/8”-16

(50.0)

3/8”-16

(50.8)

1/2”-13

(60.3)

5/8”-11

(60.3)

5/8”-11

Lbs.

kN

Wt./C
Lbs.

600 (2.67)
12
600 (2.67)
13
900 (4.00)
14
900 (4.00)
15
900 (4.00)
16
1200 (5.34)
27
1200 (5.34)
32
1800 (8.00)
36
1800 (8.00)
38
1800 (8.00)
42
2400 (10.70)
92
2400 (10.70) 176
2400 (10.70) 191

kg
(5.4)
(5.9)
(6.3)
(6.8)
(7.2)
(12.2)
(14.5)
(16.3)
(17.2)
(19.0)
(41.7)
(79.8)
(86.6)

B500 SERIES
SQUARE U-BOLT
• Includes:
1 pc. U-Bolt only
2 pcs. 3/8”-16 Hex Nuts
• Additional sizes available
• Standard finish: ZN, SS4

121/32”
(42.1)

21/2”
(63.5)
A
3/8”-16
Threads

Part No.
B500-3-3/8
B500-5

A
33/8”
5”

(85.7)
(127.0)

1/2”
(12.7)

Channel
Size

Lbs.

Wt./C
kg

15/8” x 15/8”
31/4” x 15/8”

25
33

(11.3)
(14.9)

Reference page 44 for general fitting and standard finish specifications.

52

Hardware
HHCS

SFHMS

HEX HEAD CAP SCREWS

SLOTTED FLAT HEAD MACHINE SCREWS

• Standard finish: Zinc-Plated,
Stainless Steel

• Standard finish: Zinc-Plated

Wt./C
Part No.
1/4” x 1/2” HHCS
1/4” x 3/4” HHCS
1/4” x 1” HHCS
1/4” x 11/4” HHCS
1/4” x 11/2” HHCS
5/16” x 1” HHCS
5/16” x 11/4” HHCS
5/16” x 11/2” HHCS
3/8” x 3/4” HHCS
3/8” x 1” HHCS
3/8” x 11/4” HHCS
3/8” x 11/2” HHCS
3/8” x 13/4” HHCS
3/8” x 2” HHCS
3/8” x 21/4” HHCS
3/8” x 21/2” HHCS
1/2” x 7/8” HHCS
1/2” x 1” HHCS
1/2” x 11/4” HHCS
1/2” x 11/2” HHCS
1/2” x 13/4” HHCS
1/2” x 2” HHCS
1/2” x 21/2” HHCS

Wt./C

Lbs.

kg

1.3
1.4
1.7
2.1
2.4
2.8
3.2
3.8
3.4
4.1
4.7
5.2
5.9
7.0
7.8
8.5
8.0
8.4
9.2
10.1
12.0
13.2
16.0

(.59)
(.63)
(.77)
(.95)
(1.09)
(1.27)
(1.45)
(1.72)
(1.54)
(1.86)
(2.13)
(2.36)
(2.67)
(3.17)
(3.54)
(3.85)
(3.63)
(3.81)
(4.17)
(4.58)
(5.44)
(5.99)
(7.26)

Part No.
1/4”

1/2”

x
SFHMS
x 5/8” SFHMS
1/4” x 3/4” SFHMS
5/16” x 1” SFHMS
3/8” x 11/2” SFHMS
3/8” x 2” SFHMS
3/8” x 21/4” SFHMS
3/8” x 21/2” SFHMS
1/2” x 1” SFHMS
1/2” x 11/4” SFHMS
1/2” x 11/2” SFHMS
1/2” x 21/2” SFHMS
1/4”

(.54)
(.63)
(1.27)
(2.54)
(3.04)
(3.31)
(3.58)
(2.67)
(3.17)
(3.76)
(6.26)

Wt./C
Part No.

Wt./C

Lbs.

kg

1.2
1.5
1.8
2.0
2.6
3.1
3.4
4.6
5.3

(.54)
(.68)
(.80)
(.91)
(1.18)
(1.40)
(1.54)
(2.08)
(2.40)

Lbs.

kg

.9
1.2
1.5
1.7
1.9
2.5
2.9
3.3
4.0
4.5
5.1
6.3
7.1
7.7

(.41)

CNPSS

(.54)

SQUARE HEAD CONE POINT SET SCREWS

(.68)

• Standard finish: ZN

(.77)
(.86)

Wt./C

(1.13)

Part No.

(1.31)
(1.49)

3/8”

(1.81)

3/8”

(2.04)

1/2”

(2.31)

1/2”

(2.86)

1/2”

(3.22)

5/8”

(3.49)

5/8”

x
x
x
x
x
x
x

11/2”

CNPSS
2” CNPSS
11/2” CNPSS
2” CNPSS
21/2” CNPSS
2” CNPSS
21/2” CNPSS

Reference page 44 for general fitting and standard finish specifications.

53

Lbs.

kg

4.7
6.0
9.2
11.4
13.7
19.0
22.6

(2.13)
(2.72)
(4.17)
(5.17)
(6.21)
(8.62)
(10.25)

Channel Nuts & Hardware

x 3/4” SHHMS
1/4” x 1” SHHMS
1/4” x 11/4” SHHMS
1/4” x 11/2” SHHMS
5/16” x 1” SHHMS
5/16” x 11/4” SHHMS
5/16” x 11/2” SHHMS
3/8” x 11/4” SHHMS
3/8” x 11/2” SHHMS

• Standard finish: Zinc-Plated

x 1/2” SRHMS
x 3/4” SRHMS
1/4” x 1” SRHMS
1/4” x 11/4” SRHMS
1/4” x 11/2” SRHMS
5/16” x 1” SRHMS
5/16” x 11/4” SRHMS
5/16” x 11/2” SRHMS
3/8” x 1” SRHMS
3/8” x 11/4” SRHMS
3/8” x 11/2” SRHMS
3/8” x 2” SRHMS
3/8” x 21/4” SRHMS
3/8” x 21/2” SRHMS

(.50)

• Standard finish: Zinc-Plated, Stainless Steel

SLOTTED ROUND HEAD MACHINE SCREWS

1/4”

1.1
1.2
1.4
2.8
5.6
6.7
7.3
7.9
5.9
7.0
8.3
13.8

SLOTTED (COMBINATION RECESS)
HEX HEAD MACHINE SCREWS

SRHMS

1/4”

kg

SHHMS

1/4”

Part No.

Lbs.

Hardware
B446A

B446B

SWIVEL HANGER
(FEMALE ONLY)

SWIVEL HANGER
(MALE ONLY)

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

A

13/4”
(44.4)

R

13/4”
(44.4)

R

B
Wt./C

Wt./C
Part No.

A

Channel Nuts & Hardware

B446A-3/8
B446A-1/2
B446A-5/8
B446A-3/4

R

Lbs.

3/8”-16

9/32”

(7.1)

1/2”-13

3/8”

(9.5)

HN
HN
5/8”-11 HN
3/4”-10 HN

15/32”

(11.9)

9/16”

(14.3)

13
15
34
45

Part No.

kg

B

R

(5.9)

B446B-3/8

3/8”-16

9/32”

(7.1)

(6.8)

B446B-1/2
B446B-5/8
B446B-3/4

1/2”-13

3/8”

(9.5)

15/32”

(11.9)

9/16”

(14.3)

(15.4)
(20.4)

HHCS
HHCS
5/8”-11 HHCS
3/4”-10 HHCS

B446C

B446

SWIVEL HANGER
(FEMALE-FEMALE)

SWIVEL HANGER
(FEMALE-MALE)

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

23/4”
(69.8)

A

Lbs.

kg

16
20
42
60

(7.2)
(9.1)
(19.0)
(27.2)

23/4”
(69.8)

A
1”
(25.4)

A

B

Wt./C
Part No.
B446C-3/8
B446C-1/2
B446C-5/8
B446C-3/4

A
3/8”-16

HN
1/2”-13 HN
5/8”-11 HN
3/4”-10 HN

Wt./C

Lbs.

kg

Part No.

26
31
68
90

(11.8)
(14.0)
(30.8)
(40.8)

B446-3/8
B446-1/2
B446-5/8
B446-3/4

A
3/8”-16

HN
1/2”-13 HN
5/8”-11 HN
3/4”-10 HN

B
3/8”-16

HHCS
1/2”-13 HHCS
5/8”-11 HHCS
3/4”-10 HHCS

Reference page 44 for general fitting and standard finish specifications.

54

Lbs.

kg

28
36
78
112

(12.7)
(16.3)
(35.4)
(50.8)

Hardware
B617

Fig. 75

SHOULDER BOLT

SWIVEL ATTACHMENT

• Standard finish: ZN
• Wt./C 6 Lbs. (2.7 kg)

•
•
•
•

Standard finish: ZN
Sized for 3/8”-16 threaded rods
UL Listed to support up to 4” Pipe per NFPA 13
Wt./C 13 Lbs. (5.9 kg)

3/8”-16 Thread Size

2”
(50.8)

HN

MSQN

HEX NUTS

MACHINE SQUARE NUT

• Standard finish: Zinc-Plated,
Stainless Steel

• For use with B755 Beam Clamp
• Standard finish: Zinc-Plated

Wt./C
Part No.
HN

5/16”

HN

Wt./C
1/4”

Lbs.

kg

.7

(.32)

MSQN

.6

(.27)

1.0

(.45)

MSQN 5/16”

1.2

(.54)

3/8”

1.8

(.81)

3/8”

HN

1.5

(.68)

1/2”

HN

3.6

(1.63)

5/8”

HN

7.2

(3.26)

3/4”

HN

11.1

(5.03)

7/8”

HN

17.9

(8.12)

27.2

(12.34)

1” HN

Part No.

kg

MSQN

SQN

Wt./C

SQUARE NUTS

Part No.

• Standard finish: Zinc-Plated

kg

1/2”

SQN

5.7

(2.58)

5/8”

SQN

10.1

(4.58)

Reference page 44 for general fitting and standard finish specifications.

55

Lbs.

Channel Nuts & Hardware

1/4”

Lbs.

Hardware
Buzznut™
• Can be installed at any desired position on the ATR, eliminating
the need to thread hex nuts up along ATR.
• Loading Safety Factor of 3.
• Torque: 6 ft./lbs (8 Nm)
• Available in Zinc Plated or 316 stainless steel.
Part No.

Thread Size

Loading

Wt./C

Lbs.

kN

Lbs.

kg

SLWN1/4

1/4-20

240

(1.07)

14.4

(6.5)

SLWN3/8

3/8-16

730

(3.24)

15.4

(7.0)

SLWN1/2

1/2-13

1350

(6.00)

18.8

(8.5)

SLWN5/8

5/8-11

2100

(9.33)

25.4

(11.5)

SLWNM6

M6

200

(0.90)

14.1

(6.4)

SLWNM8

M8

380

(1.70)

16.3

(7.4)

SLWNM10

M10

584

(2.60)

17.2

(7.8)

SLWNM12

M12

840

(3.70)

18.9

(8.6)

FW

FFW

FLAT WASHERS

FLAT FENDER WASHERS

• Standard finish: Zinc-Plated,
Stainless Steel

• Standard finish: Zinc-Plated

O.D.

O.D. Outside Dia.

Channel Nuts & Hardware

Part No.

Wt./C

Wt./C

in.

mm

Lbs.

kg

Part No.

Lbs.

kg

1/4”

FW

47/64”

(18.7)

.7

(.32)

1/4”

x 11/4” FFW

2.2

(1.00)

5/16”

FW

7/8”

(22.2)

1.4

(.63)

1/4”

x 11/2” FFW

3.1

(1.40)

3/8”

FW

1”

(25.4)

1.7

(.77)

3/8”

x 11/4” FFW

2.0

(.91)

1/2”

FW

13/8”

(34.9)

3.9

(1.77)

3/8”

x

3.0

(1.36)

5/8”

FW

115/32”

(37.3)

6.4

(2.90)

1/2”

x 2” FFW

5.4

(2.45)

3/4”

FW

2”

(50.8)

10.9

(4.94)

7/8”

FW

21/4”

(57.1)

13.4

(6.08)

21/2”

(63.5)

18.8

(8.53)

1” FW

11/2”

FFW

LW

Wt./C

LOCK WASHERS

Part No.

• Standard finish: Zinc-Plated,
Stainless Steel

1/4”

LW

5/16”

kg

.3

(.13)

.4

(.18)

LW

.6

(.27)

1/2”

LW

1.3

(.59)

5/8”

LW

2.4

(1.09)

3/4”

LW

3.8

(1.72)

7/8”

LW

5.9

(2.67)

8.8

(3.99)

3/8”

LW

1” LW

Reference page 44 for general fitting and standard finish specifications.

56

Lbs.

Hardware
SC228B

SC228
HANGER ROD
STIFFENER
•
•
•
•

For 3/8” thru 5/8” ATR
Strut ordered separately
Standard finish: ZN
Wt./C 21 Lbs. (9.5 kg)

N228WO

3/8”-16

Threads

11/2”

SC228BS

(63.5)

Fig. 98
ROD STIFFENER
•
•
•
•
•

For 3/8” thru 7/8” ATR
Use with 12 ga. strut only, ordered separately
Secres channel to hanger rod for vertical seismic bracing
Standard finish: ZN
Wt./C 11 Lbs. (5.0 kg)

Fig. 98B
ROD STIFFENER w/BREAK-OFF BOLT HEAD
For 3/8” thru 7/8” ATR
Use with 12 ga. strut only, ordered separately
Secres channel to hanger rod for vertical seismic bracing
Uses a snap-off bolt head
Standard finish: ZN
Wt./C 13 Lbs. (5.9 kg)

Channel Nuts & Hardware

•
•
•
•
•
•

SC-UB

3/8”-16 Hex Nuts

HANGER ROD STIFFENER
3/4”

7/8”

• For
thru
ATR
• Strut ordered separately
• Includes: (1) B3188-11/2WO U-Bolt
(2) 3/8”-16 Hex Nuts
(1) 2-Hole Plate
• Standard finish: ZN
• Wt./C 50 Lbs. (22.7 kg)

2-Hole Plate
1/4” (6mm) x 15/8” (41mm) x 31/2” (89mm)

B3188-11/2” WO U-Bolt

Stiffner Channel

All Threaded Rod (ATR)

Reference page 44 for general fitting and standard finish specifications.

57

Hardware
ATR
ALL THREADED ROD
• Available in 36” (91.4 cm), 72” (182.9 cm), 120” (304.8 cm), 144” (365.7 cm) lengths
• Safety Factor of 5 on recommended load
• Standard finish: Zinc-Plated, Stainless Steel Type 304
Part No.
& Size
ATR
ATR
ATR
ATR
ATR
ATR
ATR
ATR

Threads
Per Inch

1/4”

20
18
16
13
11
10
9
8

5/16”
3/8”
1/2”
5/8”
3/4”
7/8”

1”

Recommended Load
Lbs.

240
400
730
1350
2160
3230
4480
5900

Wt./C Ft. (3048.0 cm)

kN

Lbs.

kg

(1.07)

12
19
29
53
89
123
170
225

(5.44)

(1.78)
(3.24)
(6.00)
(9.60)
(14.37)
(19.93)
(26.24)

B655 ROD COUPLING
B656 REDUCER ROD COUPLING

(24.04)
(40.37)
(55.79)
(77.11)
(102.06)

Part No.

• Load rating for each coupler meets
All Threaded Rod value
• Standard finish: Zinc-Plated, Stainless Steel Type 304

Channel Nuts & Hardware

(8.62)
(13.15)

Size

Recommended
Load
Lbs.

B655-1/4

1/4”-20

B655-5/16
B655-3/8
B655-1/2
B655-5/8
B655-3/4
B655-7/8
B655-1

5/16”-18
3/8”-16
1/2”-13
5/8”-11
3/4”-10
7/8”-9

1”-8

Part No.

7/8”

240
(1.07)
380
(1.69) 7/8”
730
(3.24) 11/8”
1350 (6.00) 13/4”
1810 (8.05) 21/8”
2710 (12.05) 21/4”
3770 (16.77) 21/2”
4960 (22.06) 23/4”

Size

Recommended
Load
Lbs.

B656-3/8 x 1/4
B656-1/2 x 3/8
B656-5/8 x 1/2
B656-3/4 x 5/8
B656-7/8 x 3/4

3/8”-16

Length

& 1/4”-20
1/2”-13 & 3/8”-16
5/8”-11 & 1/2”-13
3/4”-10 & 5/8”-11
7/8”-9 & 3/4”-10

240
730
1350
1810
2710

(22.2)
(22.2)
(28.6)
(44.4)
(54.0)
(57.1)
(63.5)
(69.8)

(1.07)
(3.24)
(6.00)
(8.05)
(12.05)

1”
11/4”
11/4”
11/2”
13/4”

BHR1225ZN
BHR1238ZN
BHR1250ZN
BHR1262ZN

1/4”-20
3/8”-16
1/2”-13
5/8”-11

kN

Lbs.

kg

240
730
1350
1500

(1.07)

41
63
98
148

(18.6)

(3.24)
(6.00)
(6.67)

(31.7)
(31.7)
(38.1)
(44.4)

(28.6)
(44.4)
(67.1)

Note: Based on use with 12 ga. channel.
(BHR1225, BHR1238, and BHR1250 use combo nut washers instead of square washers and channel nuts)
Reference page 44 for general fitting and standard finish specifications.

58

(.86)

(25.4)

Wt./C

Lbs.

1.9
1.8
3.6
11.3
17.6
28.1
57.2
73.7

(.81)
(1.63)
(5.12)
(7.98)
(12.74)
(25.94)
(33.43)

Wt./C
Lbs.

• 12” length of threaded rod completely assembled with rod
coupling, locking hex nuts, square washer, and channel nut.
• Standard finish: Zinc-Plated
Recommended
Load

kg

Length

HOT RODS FOR TRAPEZE HANGERS

Rod Size

Lbs.

kN

BHR SERIES

Part No.

Wt./C

kN

kg

3.7 (1.68)
6.6 (2.99)
11.6 (5.26)
20.6 (9.34)
39.4 (17.87)

KwikWire™ Hardware
Clamps
For Use With Wire
Rope Diameters

Part No.
BKC100

1/16”

& 3/32”

BKC200

1/8”

3/16”

&

Box
Qty.
100
50

See table below for KwikWire™
Clamp Working Loads

KwikWire™ Clamp
Working Loads*
Wire
Rope
Dia.

Lbs.
Safety
Factor 5

BKC100
BKC100

1/16”

0-75
25-150

BKC200
BKC200

1/8”

Clamp
Part No.

3/32”
3/16”

*Working loads shown
are for hanging
vertically.
For suspending at
15°, 30°, 45° or 60°
angles from vertical, use
the following percentage
of the working loads from
the chart:

25-250
50-640

15° = 96%
30° = 86%
45° = 70%
60° = 50%

Wire Rope
(Uncoated Galvanized Wire)
Part No.
7x7

Rope Dia.
in.

mm

Working Load
Lbs.

kg

Spool

(1)

1/16”

(1.6)

96

(43.5)

500 ft.

BKW094

(1)

3/32”

(2.3)

184

(83.4)

500 ft.

BKW125

(1)

1/8”

(3.2)

340

(154.2)

500 ft.

BKW188

(2)

3/16”

(4.8)

840

(381.0)

250 ft.

(1)

7 x 19

(2)

Wire Rope Construction Type 7 x 7
Wire Rope Construction Type 7 x 19

Instructions for installing the wire rope in the clamp - No tools are required.
1

Pass the wire rope
through the KwikWire™
Clamp

2

4

3

Loop wire rope
through/around
support

Pass wire rope back
through KwikWire™
Clamp

59

Push wire rope through
clamp leaving 2” to 3”
tail, then apply tension
on wire rope

5

To adjust, remove tension
and pull wire rope slightly
to disengage teeth, slide
adjustment pin in
direction shown by arrow
to release wire rope.

Channel Nuts & Hardware

BKW063

KwikWire™ Hardware

Wire Rope & Clamps KwikPak
Part No.
BKP10063
BKP10094
BKP20125
BKP20188

For Use With Wire
Rope Diameters

Box
Qty.

BKC100 (100 pcs.)
Wire Rope (500 ft.)

1

BKC100 (100 pcs.)
Wire Rope (500 ft.)

1

BKC200 (50 pcs.)
Wire Rope (500 ft.)

1

BKC200 (50 pcs.)
Wire Rope (250 ft.)

1

1/16ӯ
3/32ӯ
1/8ӯ

3/16ӯ

KwikPak™ makes handling KwikWire™ a breeze!
• KwikPaks include KwikWire clamps and a spool of wire rope.
• KwikPaks are shipped in a specially designed dispenser box to ease field cutting of wire.

KwikWire™ System Recommendations:

Channel Nuts & Hardware

•
•
•
•
•
•
•
•
•
•
•

Do not exceed the safe working load of the products
KwikWire™ Clamp load ratings are guaranteed only when used in combination with Cooper supplied wire rope
Do not use for overhead lifting or hoisting
Do not use if cable or components are visibly distorted or worn. Remove damaged cable end prior to inserting
in KwikWire™ Clamp
Do not paint cable near working area of KwikWire™ Clamp
Do not apply lubricant
Keep product clean and free of dirt
Do not use clamp on coated wire rope
Do not use in chlorinated or caustic atmospheres
For use in dry locations
Cooper’s BKCC tool is recommended for cutting wire rope to prevent fraying

Cable Cutter
Part No.

Box
Qty.

BKCC

1

• Wire rope cutter for cutting all wire rope sizes
** Danger: Never use cutters on energized circuits,
wire, or cable.

60

KwikWire™ Hardware
• KwikWire hanger combines the
versatility of a bolt with an
adjustable wire rope solution.
• Can be quickly installed in
existing anchors or metal
brackets with a nut.

Hanger
Part No.

• ARS, ARC, and ARW anchors
are ideal for use with KwikWire
Hangers.

BKF100-4
BKF100-6

• Ideal for supporting light
fixtures, wire basket cable
tray, HVAC ducts, and
sign/banner supports.

Thread
Size
1/4”-20

3/8”-16

Wire Rope Dia.

Loading* SF5

in.

mm

Lbs.

kg

1/16”

(1.6)

45

(20.4)

3/32”

(2.3)

(40.8)

1/16”

(1.6)

90
45

3/32”

(2.3)

90

(40.8)

(20.4)

• Allows for tool-less adjustment
of wire rope.

KwikWire™ Hanger installation
1

4

To adjust up pull or push more cable
wire through KwikWire
Hanger

3

Push cable wire up
through the bottom of
KwikWire Hanger

Continue pushing
through until 1/4”
minimum is extending
out the side of the
KwikWire Hanger

5

6

To adjust down - push up
on bottom of KwikWire
Hanger and allow cable
wire to feed down

61

When hanging the cable
wire is complete, cut off
any excess cable wire if
desired

Channel Nuts & Hardware

Screw KwikWire Hanger
into installed hanger
support (ARS anchor
pictured)

2

KwikWire™ Hardware
KwikWire Accessory Features
•
•
•
•
•
•
•
•
•

Reduces on the job installation time
Can be installed quickly without drilling into existing structure
Increases versatility in the field
KwikWire accessory system reduces inventory and shipping costs
No more sawing, filing, or fixing nuts
Designed for use with cable tray, lighting, and HVAC
Eliminates the need for all threaded rod
Cost effective solution for jack chain
“Y” style accessories require 50% less drilling

Channel Nuts & Hardware

KwikWire Accessory Numbering System
Product
Line

Assembly
Configuration

Leg
Termination

Leg
Length

Wire Rope
Diameter

Straight
Length

Assembly
or Kit

BK =
KwikWire

Blank =
Single Leg

A = Angle
Bracket w/Pin

Blank = See
Straight Length

063 = 1/16”

Y = 2 Legs

H = Hook

18 = 18” Leg

Blank =
Loop w/
Plastic Tube

Blank =
Assembly
Only

3 - 3 Legs

L = Loop

30 = 30” Leg

18 = 18”

K = Kit
(Assembly &
BKC100 Clamp)

Examples

094 = 3/32”

T = Toggle

30 = 30”

W = Fuse Cut

40 = 40”

B25 = Bolt w/ 1/4”-20 Thread

80 = 80”

B38 = Bolt w/ 3/8”-16 Thread

120 = 120”

BM6 = Bolt w/ M6 Thread

180 = 180”

BM8 = Bolt w/ M8 Thread

240 = 240”

BM10 = Bolt w/ M10 Thread

360 = 360”

BKYT18-094-120K

BK Y T 18 - 094 - 120 K
Cooper B-Line KwikWire Accessory
2 legs - toggle leg termination - 18” legs - 3/32” diameter wire - 120” straight length - kit with clamp

BKL-063-120K

BK L - 063 - 120 K
Cooper B-Line KwikWire Accessory
single leg - looped leg termination - 1/16” diameter wire - 120” straight length - kit with clamp

Custom assemblies are available as shown by the red dot
on pages 63 - 70.
Lead time on custom assemblies is 2 to 3 weeks depending on quantities.
62

KwikWire™ Hardware
Loop Termination
Wire Rope Dia.
Part No.

Length

in.

mm

in.

mm

BKL-063-40

1/16”

(1.6)

40”

(1016)

BKL-063-80

1/16”

(1.6)

80”

(2032)

BKL-063-120

1/16”

(1.6)

120”

(3048)

BKL-063-180

1/16”

(1.6)

180”

(4572)

BKL-063-240

1/16”

(1.6)

240”

(6096)

BKL-063-360

1/16”

(1.6)

360”

(9144)

BKL-094-40

3/32”

(2.3)

40”

(1016)

BKL-094-80

3/32”

(2.3)

80”

(2032)

BKL-094-120

3/32”

(2.3)

120”

(3048)

BKL-094-180

3/32”

(2.3)

180”

(4572)

BKL-094-240

3/32”

(2.3)

240”

(6096)

BKL-094-360

3/32”

(2.3)

360”

(9144)

New

Box Quantity - 20
5 bags containing 4 pieces per bag

Loop Termination Kits
Wire Rope Dia.

Length

in.

mm

in.

mm

BKL-063-40K

1/16”

(1.6)

40”

(1016)

BKL-063-80K

1/16”

(1.6)

80”

(2032)

BKL-063-120K

1/16”

(1.6)

120”

(3048)

BKL-063-180K

1/16”

(1.6)

180”

(4572)

BKL-063-240K

1/16”

(1.6)

240”

(6096)

BKL-063-360K

1/16”

(1.6)

360”

(9144)

BKL-094-40K

3/32”

(2.3)

40”

(1016)

BKL-094-80K

3/32”

(2.3)

80”

(2032)

BKL-094-120K

3/32”

(2.3)

120”

(3048)

BKL-094-180K

3/32”

(2.3)

180”

(4572)

BKL-094-240K

3/32”

(2.3)

240”

(6096)

BKL-094-360K

3/32”

(2.3)

360”

(9144)

New

Channel Nuts & Hardware

Part No.

Box Quantity - 20
5 bags containing 4 pieces per bag

• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.

= Stock item, lead time 2 - 3 working days

= Non-stock item, lead time 10 - 15 working days

63

KwikWire™ Hardware
Single Style Hook Termination
Wire Rope Dia.

New

Part No.

Length

in.

mm

in.

mm

BKH-094-40

3/32”

(2.3)

40”

(1016)

BKH-094-80

3/32”

(2.3)

80”

(2032)

BKH-094-120

3/32”

(2.3)

120”

(3048)

BKH-094-180

3/32”

(2.3)

180”

(4572)

BKH-094-240

3/32”

(2.3)

240”

(6096)

BKH-094-360

3/32”

(2.3)

360”

(9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

Single Style Hook Termination Kits
New

Wire Rope Dia.

Length

Part No.

in.

mm

in.

mm

BKH-094-40K

3/32”

(2.3)

40”

(1016)

BKH-094-80K

3/32”

(2.3)

80”

(2032)

BKH-094-120K

3/32”

(2.3)

120”

(3048)

BKH-094-180K

3/32”

(2.3)

180”

(4572)

BKH-094-240K

3/32”

(2.3)

240”

(6096)

BKH-094-360K

3/32”

(2.3)

360”

(9144)

Channel Nuts & Hardware

Box Quantity - 20
5 bags containing 4 pieces per bag

‘Y’ Style Hook Termination With Loop
New

Wire Rope Dia.
Part No.

Length

in.

mm

in.

mm

BKYH18-094

3/32”

(2.3)

18”

(457)

BKYH30-094

3/32”

(2.3)

30”

(762)

Box Quantity - 10
5 bags containing 2 pieces per bag
• Hook designed to accept up to 3/8” diameter wire.
• Available as a wire rope with hook termination only or as a ready-to-use kit with a
BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple (3) leg styles
= Stock item, lead time 2 - 3 working days

Triple (3) leg style

= Non-stock item, lead time 10 - 15 working days

64

KwikWire™ Hardware
‘Y’ Style Hook Termination
Leg Length
Part No.
BKYH18-094-40

Wire Rope Dia.

Length

in.

mm

in.

mm

in.

mm

18”

(457)

3/32”

(2.3)

40”

(1016)

(2.3)

80”

(2032)

BKYH18-094-80

18”

(457)

3/32”

BKYH18-094-120

18”

(457)

3/32”

(2.3)

120”

(3048)

BKYH18-094-180

18”

(457)

3/32”

(2.3)

180”

(4572)

BKYH18-094-240

18”

(457)

3/32”

(2.3)

240”

(6096)

BKYH18-094-360

18”

(457)

3/32”

(2.3)

360”

(9144)

BKYH30-094-40

30”

(762)

3/32”

(2.3)

40”

(1016)

BKYH30-094-80

30”

(762)

3/32”

(2.3)

80”

(2032)

BKYH30-094-120

30”

(762)

3/32”

(2.3)

120”

(3048)

BKYH30-094-180

30”

(762)

3/32”

(2.3)

180”

(4572)

BKYH30-094-240

30”

(762)

3/32”

(2.3)

240”

(6096)

(762)

3/32”

(2.3)

360”

(9144)

BKYH30-094-360

30”

New

Box Quantity - 10
5 bags containing 2 pieces per bag

‘Y’ Style Hook Termination Kits
Leg Length
Part No.

in.

Wire Rope Dia.

Length

mm

in.

mm

in.

mm

18”

(457)

(2.3)

40”

(1016)

BKYH18-094-80K

18”

(457)

3/32”

(2.3)

80”

(2032)

BKYH18-094-120K

18”

(457)

3/32”

(2.3)

120”

(3048)

BKYH18-094-180K

18”

(457)

3/32”

(2.3)

180”

(4572)

BKYH18-094-240K

18”

(457)

3/32”

(2.3)

240”

(6096)

BKYH18-094-360K

18”

(457)

3/32”

(2.3)

360”

(9144)

BKYH30-094-40K

30”

(762)

3/32”

(2.3)

40”

(1016)

BKYH30-094-80K

30”

(762)

3/32”

(2.3)

80”

(2032)

BKYH30-094-120K

30”

(762)

3/32”

(2.3)

120”

(3048)

BKYH30-094-180K

30”

(762)

3/32”

(2.3)

180”

(4572)

BKYH30-094-240K

30”

(762)

3/32”

(2.3)

240”

(6096)

(762)

3/32”

(2.3)

360”

(9144)

BKYH30-094-360K

30”

New

Channel Nuts & Hardware

BKYH18-094-40K

3/32”

Box Quantity - 10
5 bags containing 2 pieces per bag

• Hook designed to accept up to 3/8” diameter wire.
• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.

= Stock item, lead time 2 - 3 working days

= Non-stock item, lead time 10 - 15 working days

65

KwikWire™ Hardware
Single Style Toggle Termination
Wire Rope Dia.

New

Part No.

Length

in.

mm

in.

mm

BKT-063-40

1/16”

(1.6)

40”

(1016)

BKT-063-80

1/16”

(1.6)

80”

(2032)

BKT-063-120

1/16”

(1.6)

120”

(3048)

BKT-063-180

1/16”

(1.6)

180”

(4572)

BKT-063-240

1/16”

(1.6)

240”

(6096)

BKT-063-360

1/16”

(1.6)

360”

(9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

Single Style Toggle Termination Kits
New

Wire Rope Dia.

Length

Part No.

in.

mm

in.

mm

BKT-063-40K

1/16”

(1.6)

40”

(1016)

BKT-063-80K

1/16”

(1.6)

80”

(2032)

BKT-063-120K

1/16”

(1.6)

120”

(3048)

BKT-063-180K

1/16”

(1.6)

180”

(4572)

BKT-063-240K

1/16”

(1.6)

240”

(6096)

BKT-063-360K

1/16”

(1.6)

360”

(9144)

Channel Nuts & Hardware

Box Quantity - 20
5 bags containing 4 pieces per bag

‘Y’ Style Toggle Termination With Loop
New

Length

Wire Rope Dia.
Part No.

in.

mm

in.

mm

BKYT12-063

1/16”

(1.6)

12”

(305)

BKYT18-063

1/16”

(1.6)

18”

(457)

BKYT30-063

1/16”

(1.6)

30”

(762)

Box Quantity - 10
5 bags containing 2 pieces per bag
• Available as a wire rope with toggle termination only or as a ready-to-use kit with a
BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple (3) leg styles
• All triple (3) leg styles are non-stock, consult Cooper B-Line for lead times
= Stock item, lead time 2 - 3 working days

Triple (3) leg style

= Non-stock item, lead time 10 - 15 working days

66

KwikWire™ Hardware
‘Y’ Style Toggle Termination
Leg Length

Wire Rope Dia.

Length

Part No.

in.

mm

in.

mm

in.

mm

BKYT12-063-40
BKYT12-063-80
BKYT12-063-120
BKYT12-063-180
BKYT12-063-240
BKYT12-063-360

12”
12”
12”
12”
12”
12”

(305)

1/16”

(1.6)

(1016)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

40”
80”
120”
180”
240”
360”

BKYT18-063-40
BKYT18-063-80
BKYT18-063-120
BKYT18-063-180
BKYT18-063-240
BKYT18-063-360

18”
18”
18”
18”
18”
18”

(457)

1/16”

(1.6)

(1016)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

40”
80”
120”
180”
240”
360”

BKYT30-063-40
BKYT30-063-80
BKYT30-063-120
BKYT30-063-180
BKYT30-063-240
BKYT30-063-360

30”
30”
30”
30”
30”
30”

(762)

1/16”

(1.6)

(1016)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

40”
80”
120”
180”
240”
360”

(2032)

New

(3048)
(4572)
(6096)
(9144)

(2032)
(3048)
(4572)
(6096)
(9144)

Box Quantity - 10
5 bags containing 2 pieces per bag

(2032)
(3048)
(4572)
(6096)
(9144)

‘Y’ Style Toggle Termination Kits
Leg Length

Wire Rope Dia.

Length

in.

mm

in.

mm

in.

mm

BKYT12-063-40K
BKYT12-063-80K
BKYT12-063-120K
BKYT12-063-180K
BKYT12-063-240K
BKYT12-063-360K

12”
12”
12”
12”
12”
12”

(305)

1/16”

(1.6)

(1016)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

(305)

1/16”

(1.6)

40”
80”
120”
180”
240”
360”

BKYT18-063-40K
BKYT18-063-80K
BKYT18-063-120K
BKYT18-063-180K
BKYT18-063-240K
BKYT18-063-360K

18”
18”
18”
18”
18”
18”

(457)

1/16”

(1.6)

(1016)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

(457)

1/16”

(1.6)

40”
80”
120”
180”
240”
360”

BKYT30-063-40K
BKYT30-063-80K
BKYT30-063-120K
BKYT30-063-180K
BKYT30-063-240K
BKYT30-063-360K

30”
30”
30”
30”
30”
30”

(762)

1/16”

(1.6)

(762)

(1.6)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

(762)

1/16”

(1.6)

40”
80”
120”
180”
240”
360”

(1016)

1/16”

New

(2032)
(3048)
(4572)
(6096)
(9144)

(2032)
(3048)
(4572)
(6096)
(9144)

Box Quantity - 10
5 bags containing 2 pieces per bag

(2032)
(3048)
(4572)
(6096)
(9144)

• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
= Stock item, lead time 2 - 3 working days

= Non-stock item, lead time 10 - 15 working days

67

Channel Nuts & Hardware

Part No.

KwikWire™ Hardware
Bolt Termination
Thread
Size

Part No.

New

Channel Nuts & Hardware

Box Quantity - 20
5 bags containing 4 pieces per bag

•
•
•
•
•

Wire Rope Dia.

Length

in.

mm

in.

mm

BKB25-063-40

1/4”-20

1/16”

(1.6)

40”

(1016)

BKB25-063-80

1/4”-20

1/16”

(1.6)

80”

(2032)

BKB25-063-120

1/4”-20

1/16”

(1.6)

120”

(3048)

BKB25-063-180

1/4”-20

1/16”

(1.6)

180”

(4572)

BKB25-063-240

1/4”-20

1/16”

(1.6)

240”

(6096)

BKB25-063-360

1/4”-20

1/16”

(1.6)

360”

(9144)

BKB38-094-40

3/8”-16

3/32”

(2.3)

40”

(1016)

BKB38-094-80

3/8”-16

3/32”

(2.3)

80”

(2032)

BKB38-094-120

3/8”-16

3/32”

(2.3)

120”

(3048)

BKB38-094-180

3/8”-16

3/32”

(2.3)

180”

(4572)

BKB38-094-240

3/8”-16

3/32”

(2.3)

240”

(6096)

BKB38-094-360

3/8”-16

3/32”

(2.3)

360”

(9144)

Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
Available in single, double (Y), and triple leg (3) styles
All (Y) and triple (3) styles are non-stock, consult Cooper B-Line for lead times

Double (Y) leg style

= Stock item, lead time 2 - 3 working days

Triple (3) leg style

= Non-stock item, lead time 10 - 15 working days

68

KwikWire™ Hardware
Bolt Termination Kits
Part No.

Wire Rope Dia.

Length

in.

mm

in.

mm

BKB25-063-40K

1/4”-20

1/16”

(1.6)

40”

(1016)

BKB25-063-80K

1/4”-20

1/16”

(1.6)

80”

(2032)

BKB25-063-120K

1/4”-20

1/16”

(1.6)

120”

(3048)

BKB25-063-180K

1/4”-20

1/16”

(1.6)

180”

(4572)

BKB25-063-240K

1/4”-20

1/16”

(1.6)

240”

(6096)

BKB25-063-360K

1/4”-20

1/16”

(1.6)

360”

(9144)

BKB38-094-40K

3/8”-16

3/32”

(2.3)

40”

(1016)

BKB38-094-80K

3/8”-16

3/32”

(2.3)

80”

(2032)

BKB38-094-120K

3/8”-16

3/32”

(2.3)

120”

(3048)

BKB38-094-180K

3/8”-16

3/32”

(2.3)

180”

(4572)

BKB38-094-240K

3/8”-16

3/32”

(2.3)

240”

(6096)

BKB38-094-360K

3/8”-16

3/32”

(2.3)

360”

(9144)

New

Box Quantity - 20
5 bags containing 4 pieces per bag

Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
Available in single, double (Y), and triple (3) styles
All double (Y) and triple (3) styles are non-stock, consult Cooper B-Line for lead times

Double (Y) leg style

Triple (3) leg style

= Stock item, lead time 2 - 3 working days

= Non-stock item, lead time 10 - 15 working days

69

Channel Nuts & Hardware

•
•
•
•
•

Thread
Size

KwikWire™ Hardware
Angle Bracket Termination
New

Wire Rope Dia.
Part No.

Length

in.

mm

in.

mm

BKA-063-40

1/16”

(1.6)

40”

(1016)

BKA-063-80

1/16”

(1.6)

80”

(2032)

BKA-063-120

1/16”

(1.6)

120”

(3048)

BKA-063-180

1/16”

(1.6)

180”

(4572)

BKA-063-240

1/16”

(1.6)

240”

(6096)

BKA-063-360

1/16”

(1.6)

360”

(9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

Angle Bracket Termination Kits

Channel Nuts & Hardware

New

Wire Rope Dia.

Length

Part No.

in.

mm

in.

mm

BKA-063-40K

1/16”

(1.6)

40”

(1016)

BKA-063-80K

1/16”

(1.6)

80”

(2032)

BKA-063-120K

1/16”

(1.6)

120”

(3048)

BKA-063-180K

1/16”

(1.6)

180”

(4572)

BKA-063-240K

1/16”

(1.6)

240”

(6096)

BKA-063-360K

1/16”

(1.6)

360”

(9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

•
•

Available as a wire rope with angle bracket termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.

= Stock item, lead time 2 - 3 working days

= Non-stock item, lead time 10 - 15 working days

70

Hardware - Notes

Channel Nuts & Hardware

71

Fittings
This section offers a full selection of fittings and
accessories to complete Cooper B-Line’s metal
framing system. Fittings are made from hot
rolled, pickled and oiled plate or strip steel in
accordance with ASTM A1018 33,000 PSI min.
yield, unless noted.

Dimensions
The following dimensions apply to all fittings
except as noted:
Hole Spacing – 17/8”
(47.6 mm) on center
Hole Spacing –
13/16” (20.6 mm)
from end

Hole Size – 9/16”
(14.3 mm) diameter
Thickness – 1/4” (6.3 mm)

Width –
15/8” (41.3 mm)

Materials & Finishes (Unless otherwise noted)
Finish
Code
PLN

Finish
Plain

ZN

Electro-Plated Zinc

GRN
HDG
SS4
SS6
AL

Dura-Green
Hot-Dipped Galvanized
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum

Specification
ASTM A1018
33,000 PSI min. yield
ASTM B633 SC3 Type III
or ASTM A653
ASTM A123
ASTM A240
ASTM A240
ASTM B209

Note: A minimum order may apply on special
material and finishes.

Load Data
The load data published includes safety factor of 2.5 when used with 12 ga. (2.6) channel
(safety factor = ratio of ultimate load to the design load).
Use 1/2”-13 x 7/8” hex head cap screws and 1/2”-13 (N225 or TN225) channel nuts for the rated results.

Recommended Bolt Torque
Bolt Size

1/4”-20

5/16”-18

3/8”-16

1/2”-13

Foot/Lbs.

6

11

19

50

Nm

8

15

26

68

Strut Fittings

See chart on page 112 for setscrew torque.

Hardware
Nuts and bolts are not included with the fittings and must be ordered separately, unless noted.

Pre-Assembled Fittings
Some fittings are available with hex head cap screws and channel nuts pre-assembled.
These fittings and finishes will be flagged using the following symbol.
ZN

PA

Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in millimeters.

72

GRN

Flat Plate Fittings
B200-B202-2

SQUARE WASHER

• Standard finishes: ZN,
GRN, HDG, SS4, SS6, AL

Part
No.
B200
B201
B202
B202-1
B202-2

15/8”
(41.3)

Hole Size

A

B129

A

(A)

3/8”

(9.5)

7/16”

(11.1)

9/16”
11/16”

(14.2)

13/16”

(20.6)

(17.4)

Bolt
5/16”
3/8”
1/2”
5/8”
3/4”

Size
(7.9)
(9.5)
(12.7)
(15.9)
(19.0)

B200D-B202-2D

NO TWIST SQUARE WASHER

• Standard finishes: ZN,
GRN, HDG, SS4, SS6, AL

Part
No.
B200D
B201D
B202D
B202-1D
B202-2D

15/8”
(41.3)

A

Hole Size

TWO HOLE SPLICE PLATE

Wt./C
Lbs.

kg

18
18
17
16
15

(8.1)
(8.1)

• Standard finishes: ZN, GRN
• Wt./C 37 Lbs. (16.8 kg)

PA

ZN
GRN

(7.7)
(7.2)

31/2”

(6.8)

(88.9)

Wt./C
A

(A)

3/8”

(9.5)

7/16”

(11.1)

9/16”

(14.2)

11/16” (17.4)
13/16” (20.6)

Bolt
5/16”
3/8”
1/2”
5/8”
3/4”

Size
(7.9)
(9.5)
(12.7)
(15.9)
(19.0)

Lbs.

kg

18
18
17
16
15

(8.1)
(8.1)
(7.7)
(7.2)
(6.8)

B340

B528

B141

TWO HOLE SPLICE PLATE

TWO HOLE SPLICE PLATE

THREE HOLE SPLICE PLATE

• Standard finishes: ZN, GRN
• Wt./C 34 Lbs. (15.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 50 Lbs. (22.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 55 Lbs. (24.9 kg)

PA
15/16”

15/8”
(41.3)

ZN
GRN

21/2”
(63.5)

53/8”
(136.5)

(33.3)

31/4”
(82.5)

45/8”
(117.5)

B557

B341

B342

THREE HOLE SPLICE PLATE

FOUR HOLE SPLICE PLATE

FIVE HOLE SPLICE PLATE

• Standard finishes: ZN, GRN
• Wt./C 50 Lbs. (22.7 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 76 Lbs. (34.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 96 Lbs. (43.5 kg)

PA

47/8”

ZN
GRN

(123.8)

71/4”

15/8”

Strut Fittings

(184.1)

91/8”
(231.8)

15/8”
(41.3)

(41.3)

Reference page 72 for general fitting and standard finish specifications.

73

PA

Preassembled fitting.

Flat Plate Fittings
B138

B139

B504

TWO HOLE SWIVEL PLATE

THREE HOLE SWIVEL PLATE

FOUR HOLE SPLICE PLATE

• Standard finishes: ZN, GRN
• Wt./C 48 Lbs. (21.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 69 Lbs. (31.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 73 Lbs. (33.1 kg)

45/8”
(117.5)

61/2”
(165.1)

3”
(76.2)

17/8”

15/8”
(41.3)

31/2”
(88.9)

3”

31/4”
(82.5)

(76.2)

(47.6)

B140

B143

B133

THREE HOLE CORNER PLATE

FOUR HOLE CORNER PLATE

FOUR HOLE TEE PLATE

• Standard finishes: ZN, GRN, HDG,
SS4
• Wt./C 56 Lbs. (25.4 kg)

• Standard finishes: ZN, GRN, HDG,
SS4
• Wt./C 75 Lbs. (34.0 kg)

• Standard finishes: ZN, GRN, HDG,
SS4, AL
• Wt./C 75 Lbs. (34.0 kg)

PA

ZN
GRN

PA

ZN
GRN

31/2”

PA

31/2”
(88.9)

ZN
GRN

31/2”
(88.9)

(88.9)

53/8”
(136.5)

31/2”
(88.9)

53/8”
(136.5)

B132

B135

B142

FIVE HOLE CROSS PLATE

THREE HOLE CORNER
GUSSET PLATE

FOUR HOLE CORNER
GUSSET PLATE

• Standard finishes: ZN, GRN
• Wt./C 70 Lbs. (31.7 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 102 Lbs. (46.2 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

PA

ZN
GRN

PA
53/8”

Strut Fittings

(136.5)

ZN
GRN

31/2”
(88.9)

31/2”
(88.9)
31/2
(88.9)

53/8”
(136.5)

PA

Preassembled fitting.

53/8”
(136.5)

Reference page 72 for general fitting and standard finish specifications.

74

Flat Plate Fittings
B137

B556

B337

FOUR HOLE CORNER
GUSSET PLATE

FIVE HOLE CORNER
GUSSET PLATE

THREE HOLE TEE
GUSSET PLATE

• Standard finishes: ZN, GRN
• Wt./C 273 Lbs. (123.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 145 Lbs. (65.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 70 Lbs. (31.7 kg)

75/8”

25/16”
(58.7)

(193.7)
13
5 /16”
(147.6)

1”

31/2”

53/8”

(25.4)

(88.9)

(136.5)

75/8”

53/8”
(136.5)

(193.7)

31/2”
(88.9)

31/2”
(88.9)

1”
(25.4)

B432

B136

B532

FOUR HOLE TEE GUSSET PLATE

FOUR HOLE TEE GUSSET PLATE

FIVE HOLE TEE GUSSET PLATE

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 143 Lbs. (64.8 kg)

31/2”
(88.9)

31/2”
(88.9)

53/8”
(136.5)

53/8”
(136.5)

53/8”
(136.5)
53/8”
(136.5)

B339

B568

B334

SIX HOLE TEE GUSSET PLATE

SIX HOLE CROSS GUSSET
PLATE

SEVEN HOLE CROSS
GUSSET PLATE

• Standard finishes: ZN, GRN
• Wt./C 166 Lbs. (75.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 232 Lbs. (105.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 149 Lbs. (67.6 kg)

31/2”
(88.9)

91/8”
(231.8)

91/8”
(231.8)

31/2”
(88.9)

53/8”
(136.5)

Reference page 72 for general fitting and standard finish specifications.

75

Strut Fittings

91/8”
(231.8)

90° Angle Fittings
B420-378

B420-578

B420-778

ONE HOLE CORNER ANGLE

ONE HOLE CORNER ANGLE

ONE HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 60 Lbs. (27.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 85 Lbs. (38.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 107 Lbs. (48.5 kg)

17/8”
(47.6)

17/8”

17/8”

(47.6)

(47.6)

77/8”
(200.0)

57/8”
(149.2)

37/8”
(98.4)

B420-978

B101

B230

ONE HOLE CORNER ANGLE

TWO HOLE CORNER ANGLE

TWO HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 129 Lbs. (58.5 kg)

• Standard finishes: ZN, GRN, HDG,
SS4, AL
• Wt./C 37 Lbs. (16.8 kg)

• Standard finishes: ZN, GRN, HDG,
SS4, AL
• Wt./C 37 Lbs. (16.8 kg)

PA

ZN
GRN

PA

15/8”

ZN
GRN

17/8”
(47.6)

(41.3)

17/8”
(47.6)

97/8”
(250.8)

21/16”
(52.4)

25/16”
(58.7)

B231

B359

B360

TWO HOLE “NO-TWIST”
CORNER ANGLE

TWO HOLE CORNER ANGLE

TWO HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 48 Lbs. (21.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 41 Lbs. (18.6 kg)

PA

ZN
GRN

Strut Fittings

3”

31/2”
(88.9)

(76.2)

21/4”
(57.1)
21/4”
(57.1)

PA

Preassembled fitting.

17/8”
(47.6)

Reference page 72 for general fitting and standard finish specifications.

76

17/8”
(47.6)

90° Angle Fittings
B361

B102

B103

TWO HOLE CORNER ANGLE

THREE HOLE CORNER ANGLE

THREE HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 60 Lbs. (27.2 kg)

• Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 56 Lbs. (25.4 kg)
• Wt./C 56 Lbs. (25.4 kg)

PA

ZN
GRN

ZN
GRN

PA

15/8”
(41.3)

31/2”

4”

(88.9)

(101.6)

41/8”
(104.8)

17/8”
(47.6)

21/4”
(57.1)

B232

B374

B529

THREE HOLE CORNER ANGLE

THREE HOLE CORNER ANGLE

THREE HOLE CORNER ANGLE

• Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN, HDG
• Wt./C 56 Lbs. (25.4 kg)
• Wt./C 56 Lbs. (25.4 kg)

PA

ZN
GRN

PA

ZN
GRN

• Standard finishes: ZN, GRN
• Wt./C 78 Lbs. (35.4 kg)

3”

21/16”
(52.4)

15/16”

(76.2)

(33.3)

17/8”
(47.6)

47/8”
(123.8)

315/16”

33/4”
(95.2)

(100.0)

15/16”
(33.3)

21/2”
(63.5)

B104

B115

B558

FOUR HOLE CORNER ANGLE

FOUR HOLE CORNER ANGLE

FOUR HOLE CORNER ANGLE

• Standard finishes: ZN, GRN, HDG,
SS4, SS6, AL
• Wt./C 78 Lbs. (35.4 kg)

• Standard finishes: ZN, GRN, HDG,
SS4, AL
• Wt./C 76 Lbs. (34.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 73 Lbs. (33.1 kg)

PA

ZN
GRN

PA

ZN
GRN

15/8”
(41.3)

33/4”
(95.2)

31/2”
(88.9)

Strut Fittings

21/4”
(57.1)
41/8”
(104.8)
315/16”
(100.0)

15/8”
(41.3)

Reference page 72 for general fitting and standard finish specifications.

77

31/4”
(82.5)

PA

Preassembled fitting.

90° Angle Fittings
B235R

B235L

B236R

THREE HOLE (RIGHT HAND)
OFFSET BENT ANGLE

THREE HOLE (LEFT HAND)
OFFSET BENT ANGLE

THREE HOLE (RIGHT HAND)
OFFSET BENT ANGLE

• 15/8” (41.3) from center to center of
the holes that are shown with bolt
heads
• Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg)

• 15/8” (41.3) from center to center of
the holes that are shown with bolt
heads
• Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 65 Lbs. (29.5 kg)

31/4”
(82.5)

17/8”
(47.6)

31/4”
(82.5)

21/16”
(52.4)

17/8”
(47.6)

17/8”
(47.6)

21/16”

21/16”

(52.4)

(52.4)

31/2”
(88.9)

B236L

B237

B357

THREE HOLE (LEFT HAND)
OFFSET BENT ANGLE

THREE HOLE OFFSET BENT TEE

FOUR HOLE OFFSET BENT TEE

• Standard finishes: ZN, GRN
• Wt./C 71 Lbs. (32.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 77 Lbs. (34.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 65 Lbs. (29.5 kg)

47/8”
(123.8)

17/8”

31/2”

2”

(47.6)

(88.9)

21/16”

(50.8)

(52.4)

53/8”
(136.5)

21/16”

Strut Fittings

(52.4)

B238R

B238L

B239

FOUR HOLE (RIGHT HAND)
OFFSET BENT TEE

FOUR HOLE (LEFT HAND)
OFFSET BENT TEE

FIVE HOLE OFFSET BENT TEE

• Standard finishes: ZN, GRN
• Wt./C 76 Lbs. (34.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 76 Lbs. (34.5 kg)

21/16”

21/16”

(52.4)

(52.4)

• Standard finishes: ZN, GRN
• Wt./C 96 Lbs. (43.5 kg)

21/16”
(52.4)

33/4”
(95.2)

31/2”

31/2”

(88.9)

(88.9)

33/4”
(95.2)

Reference page 72 for general fitting and standard finish specifications.

78

53/8”
(136.5)

31/2”
(88.9)

90° Angle Fittings
B844

B844W

B888W

UNIVERSAL SHELF BRACKET

UNIVERSAL SHELF BRACKET• Standard finishes: ZN, GRN, HDG, SS4 WELDED

UNIVERSAL SHELF BRACKETWELDED

• Wt./C 132 Lbs. (59.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 197 Lbs. (89.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 134 Lbs. (60.8 kg)

4”

4”

(101.6)

(101.6)

513/16”
(147.6)
Welded
Corner

4”

4”

(101.6)

(101.6)

17/8”
(47.6)

17/8”
(47.6)
53/8”
(136.5)

17/8”
(47.6)

B234R

B234L

B134R

FOUR HOLE (RIGHT HAND)
CORNER GUSSET

FOUR HOLE (LEFT HAND)
CORNER GUSSET

FOUR HOLE (RIGHT HAND)
CORNER GUSSET

• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

31/2”
15/8”

(88.9)

31/2”
(88.9)

315/16”

15/8”
(41.3)

(41.3)

(100.0)

31/2”
(88.9)
43/16”
(106.3)

43/16”
(106.3)

17/8”
(47.6)

B134L

B125

B118

FOUR HOLE (LEFT HAND)
CORNER GUSSET

THREE HOLE GUSSETTED
SHELF ANGLE

FOUR HOLE GUSSETTED
SHELF ANGLE

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 67 Lbs. (30.4 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 102 Lbs. (46.2 kg)

315/16”

31/2”
(88.9)

31/2”
(88.9)

31/2”

15/8”

(88.9)

(41.3)

25/16”
(58.7)

17/8”
(47.6)

Reference page 72 for general fitting and standard finish specifications.

79

15/8”
(41.3)
41/8”
(104.8)

Strut Fittings

(100.0)

90° Angle Fittings
B485

B533

B126

FOUR HOLE GUSSETTED
SHELF ANGLE

FIVE HOLE GUSSETTED
SHELF ANGLE

FOUR HOLE GUSSETTED THREE
WAY SHELF ANGLE

• Standard finishes: ZN, GRN
• Wt./C 148 Lbs. (67.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 141 Lbs. (63.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 101 Lbs. (45.8 kg)

17/8”
(47.6)

15/8”
(41.3)

31/2”
(88.9)

41/8”
(104.8)

53/8”

31/2”
(88.9)
21/4”
(57.1)

53/8”

(136.5)

(136.5)

315/16”
(100.0)

B127

B503R

B503L

FIVE HOLE GUSSETTED THREE
WAY SHELF ANGLE

SIX HOLE (RIGHT HAND)
GUSSETTED CORNER
CONNECTION

SIX HOLE (LEFT HAND)
GUSSETTED CORNER
CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 229 Lbs. (103.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 229 Lbs. (103.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 135 Lbs. (61.2 kg)

31/2”
(88.9)
31/2”
(88.9)

33/4”
(95.2)
33/4”
(95.2)

43/16” 43/16”
(106.3) (106.3)

43/16”
(106.3)

53/8”
(136.5)

53/8”
(136.5)

15/8”
(41.3)

15/8”
(41.3)

B663

B371

B372

SEVEN HOLE GUSSETTED
CORNER CONNECTION

TWO HOLE ADJUSTABLE
CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 41 Lbs. (18.6 kg)

TWO HOLE ADJUSTABLE
CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 38 Lbs. (17.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 289 Lbs. (131.1 kg)

Strut Fittings

53/8”
(136.5)
53/8”

25/8”
(66.7)

43/16”
(106.3)

(136.5)

25/8”
(66.7)

9/16”
(14.3)
9/16”

2”

x 11/2”

(14.3)

9/16”
(14.3)

Slot
(38.1)

(50.8)

9/16”

x 11/2”

(14.3)

Slot
(38.1)

15/8”
(41.3)
Reference page 72 for general fitting and standard finish specifications.

80

15/8”
(41.3)

90° Angle Fittings
B496

B496-1

B371-2

TWO HOLE ADJUSTABLE
CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 85 Lbs. (38.5 kg)

TWO HOLE ADJUSTABLE
CORNER ANGLE

THREE HOLE ADJUSTABLE
CORNER ANGLE

• Standard finishes: ZN, GRN, HDG
• Wt./C 58 Lbs. (26.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 61 Lbs. (27.6 kg)

23/8”
(60.3)

23/8”
(60.3)

15/16”

47/8”

67/8”

(33.3)
9/16”

(123.8)

(174.6)
9/16”

x 29/16”

(14.3)

Slot
(65.1)

9/16”

17/8”

17/8”

(47.6)

(47.6)

(14.3)

x 29/16”

(14.3)

x 11/2”

Slot
(38.1)

25/8”
(66.7)

Slot

(65.1)

37/8”
(98.4)

B104SH

B461

B112

THREE HOLE ADJUSTABLE
CORNER ANGLE

TWO HOLE ADJUSTABLE
CORNER ANGLE

FOUR HOLE ADJUSTABLE
CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 68 Lbs. (30.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 87 Lbs. (39.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 180 Lbs. (81.6 kg)

31/2”

31/2”

(88.9)

(88.9)

21/4”
(57.1)
9/16”

1/2”
(12.7)

13/32”
(10.3)

31/2”
(88.9)

9/16”

x 29/16”

(14.3)

Slot
(65.1)

41/8”
(104.8)

9/16”

x

x 11/2”

(14.3)

Slot -(2)
(38.1)

33/4”
(95.2)

4”
(101.6)

29/16” Slot

(14.3)

(65.1)

65/8”
(168.3)

B113

B109S

B521

FOUR HOLE ADJUSTABLE
CORNER ANGLE

TWO HOLE TAPPED
CORNER ANGLE

TWO HOLE BUS DUCT ANGLE

• Standard finishes: ZN, GRN
• Wt./C 256 Lbs. (116.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 33 Lbs. (14.9 kg)

x 11/2”

(14.3)

Slot -(2)
(38.1)

33/4”

5/16”-18 Tapped

17/8”

(95.2)

1/2”
(12.7)

17/8”
(47.6)

(47.6)

6”
(152.4)

85/8”
(219.1)

15/8”
(41.3)
17/8”

2”
(50.8)

(47.6)

Reference page 72 for general fitting and standard finish specifications.

81

Strut Fittings

9/16”

• Standard finishes: ZN, GRN
• Wt./C 37 Lbs. (16.8 kg)

Angular Fittings
B147-B152

B243-B253

TWO HOLE OPEN ANGLE

FOUR HOLE OPEN ANGLE

• Standard finishes: ZN, GRN

• Standard finishes: ZN, GRN

23/8”
(60.3)
11/16”
(27.0)

Part
No.

A

B147
B148
B149
B150
B151
B152

821/2°

Wt./C
Lbs.

75°
671/2°
60°
521/2°
371/2°

31/4”
A

kg

(82.5)

11/16”
(27.0)

63 (28.6)

B162-B165

A

(27.0)

35/16”
(84.1)

B162
B163
B164
B165

30°
221/2°
15°
71/2°

Wt./C
kg

21/16”
(52.4)

(26.7)

B154
TWO HOLE OPEN ANGLE
• Standard finishes: ZN, GRN, SS4
• Wt./C 58 Lbs. (26.3 kg)

Strut Fittings

11/16”
(27.0)

59

15°
221/2°
30°
371/2°
45°
521/2°
60°
671/2°
75°
821/2°

kg

311/16”
(93.6)

77

(34.9)

(88.9)

Part
No.

A

B322
B323
B324
B325
B326
B327
B328
B329
B330
B331
B332

71/2°

Wt./C
Lbs.

15°
221/2°
30°
371/2°
45°
521/2°
60°
671/2°
75°
821/2°

kg

A
13/4”
(44.4)

15/8”
(41.3)

35

(15.9)

B522

B488

THREE HOLE 95°
OPEN ANGLE FITTING

TWO HOLE LEG CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 54 Lbs. (24.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

17/8”
(47.6)

3”
(76.2)

5°
5°

5°

11/16”
(27.0)

25/16”
45°

11/16”

(58.7)

A

31/2”

• Standard finishes: ZN, GRN

11/16”

Lbs.

B243
B244
B245
B246
B247
B248
B249
B250
B251
B252
B253

71/2°

Wt./C
Lbs.

TWO HOLE OPEN SHORT ANGLE

• Standard finishes: ZN, GRN

A

A

B322-B332

TWO HOLE OPEN ANGLE

Part
No.

Part
No.

35/8”
(92.1)
31/4”
(82.5)

(27.0)

Reference page 72 for general fitting and standard finish specifications.

82

Angular Fittings
B156 - B161

B155

TWO HOLE CLOSED ANGLE

TWO HOLE CLOSED ANGLE

• Standard finishes: ZN, GRN

• Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 63 Lbs. (28.6 kg)

PA

ZN
GRN

13/16”

13/16”

Wt./C

(20.6)

Part
No.

A

B156
B157
B158
B159
B160
B161

821/2°

13/16”

75°
671/2°
60°
521/2°
371/2°

(20.6)

Lbs.

56

kg

(25.4)

31/2”
(88.9)

(20.6)

33/16”
(80.9)

45°

A
13/16”

21/2”
(63.5)

(20.6)

21/2”
(63.5)

B363 - B369

B335-2 SERIES

FOUR HOLE CLOSED ANGLE

THREE HOLE ADJUSTABLE HINGE

• Standard finishes: ZN, GRN

• OSHPD approved for Seismic Zone 4
• Standard finishes: ZN, GRN

5”

H

(127.0)

Hole Size
This Hole Only

Part
No.

A

B363
B364
B365
B366
B367
B368
B369

821/2°
75°
671/2°
60°
521/2°
45°
371/2°

411/16”

Wt./C
Lbs.

(119.1)

kg

43/8”
(111.1)

213/16”
(71.4)

95

(43.1)

Part No.
& Size
B335-2-3/8
B335-2-1/2
B335-2-5/8
B335-2-3/4

A

Hole Size
H
7/16”
(11.1)
9/16”
(14.3)
11/16” (17.4)
13/16” (20.6)

Wt./C
Lbs.

kg

96
94
92
90

(43.2)
(42.3)
(41.4)
(40.5)

B335

B335V

B335-1

FOUR HOLE
ADJUSTABLE HINGE

TWO HOLE HALF HINGE

TWO HOLE ADJUSTABLE HINGE

• Standard finishes: ZN, GRN

• Standard finishes: ZN, GRN
• Wt./C 78 Lbs. (35.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 110 Lbs. (49.9 kg)

411/16”
(119.1)

Hole Size
H
9/16” (14.3)
11/16” (17.4)
13/16” (20.6)

Wt./C
Lbs.

kg

53
54
55

(24.1)
(24.5)
(24.9)

213/16”

H

(71.4)

Strut Fittings

Part No.
& Size
B335V-1/2
B335V-5/8
B335V-3/4

213/16”
(71.4)

411/16”

411/16”

(119.1)

(119.1)

Reference page 72 for general fitting and standard finish specifications.

83

PA

Preassembled fitting.

Angular Fittings
B634

B635

SINGLE CHANNEL ADJUSTABLE BRACE

DOUBLE CHANNEL ADJUSTABLE BRACE

• Standard finishes: ZN, GRN
• Wt./C 306 Lbs. (138.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 518 Lbs. (234.9 kg)

13/16”

13/16”

(20.6)

(20.6)

15/8”
(41.3)

15/8”
(41.3)

30°
MIN.

17/8”
(47.6)

17/8”
(47.6)

33/4”
(95.2)
53/8”

33/4”
(95.2)
53/8”

(136.5)

(136.5)

B129

B650 SERIES
SEISMIC RETROFIT BRACKET
• OSHPD approved for Seismic Zone 4.
• Available for 3/8”, 1/2”, 5/8”, and 3/4” threaded rods.
• Allows installer to easily brace existing trapeze supports.
• Includes: Bracket, B129 plate, & key. Hardware sold separately.
• Standard finish: ZN, GRN

ATR

Bracket

Key
Part No.
& Size

For
Rod Size

B650-3/8

3/8”

B650-1/2
B650-5/8
B650-3/4

1/2”
5/8”
3/4”

TL

LL

Wt./C

Lbs.

kN

Lbs.

kN

Lbs.

kg

1100
1500
1500
1500

(4.89)

1100
1500
1500
1500

(4.89)

92
97
95
107

(41.4)

(6.67)
(6.67)
(6.67)

(6.67)
(6.67)
(6.67)

Longitudinal
Load (LL)

(43.6)
(42.7)

Transverse
Load (TL)

(48.5)

B633
ADJUSTABLE SEISMIC HINGE FITTING

H

Strut Fittings

• B633-1/2 thru B633-7/8 - OSHPD approved for Seismic Zone 4.
• Use 1/2” Bolt & Channel Nut on two hole side of
Connector Fitting (Torque to 50 ft.-lbs.)
• Allows for swivel in two planes.
• Standard finish: ZN
Part No.
& Size

B

A

B633-1/2

31/2”

B633-5/8
B633-3/4
B633-7/8
B633-1
B633-11/8
B633-11/4

31/2”
31/2”
39/16”
39/16”
39/16”
37/8”

(82.5)

15/8”

(82.5)

15/8”
15/8”
2”
2”
2”
21/4”

(82.5)
(90.5)
(90.5)
(90.5)
(98.4)

Hole Size
H

(41.3)

9/16”

(14.3)

(41.3)

11/16”

(17.4)

(41.3)

13/16”

(20.6)

(50.8)

15/16”

(23.8)

11/16”
(50.8) 13/16”
(57.1) 15/16”

(27.0)

(50.8)

(30.2)
(33.3)

33/4”
(95.2)
B

15/8”
(41.3)

Wt./C
Lbs.

kg

92
97
95
107
120
104
114

(41.4)
(43.6)
(42.7)
(48.5)
(54.0)
(47.2)
(51.7)

Reference page 72 for general fitting and standard finish specifications.

84

A

Braces
B261 - TWO HOLE 45° KNEE BRACE
• Standard finishes: ZN, GRN
• Design load determined by testing using a B335 hinged corner connection.
• Load ratings are for brace members only. Do not exceed allowable beam
or column loads for strut channels.
• Safety Factor of 3
Design Load

Part
No.

A

(A)

B261-8
B261-12
B261-16
B261-18
B261-24
B261-36

8”
12”
165/8”
18”
24”
36”

(203.2)
(304.8)
(422.3)
(457.2)
(609.6)
(914.4)

B

(B)

73/8” (187.3)
101/8” (257.2)
133/8” (339.7)
147/16” (366.7)
1811/16” (474.7)
273/16” (690.6)

kN

Lbs.

kg

1500
1020
530
450
250
110

(6.67)

119
165
218
234
303
441

(54.0)

(2.36)
(2.00)
(1.11)
(.49)

Design Load

Wt./C

Lbs.

(4.54)

15/8”
(41.3)

(74.8)
(98.9)

B
A
45°

15/8”
(41.3)

(106.1)
(137.4)

B

(200.0)

B631 - TWO HOLE 45° TUBING KNEE BRACE
•
•
•
•
•

1” (25.4) Square steel tubing
Material: ASTM A513
Standard finishes: ZN, GRN
Design load determined by testing using a B335 hinged corner connection.
Load ratings are for brace members only. Do not exceed allowable beam
or column loads for strut channels.
• Safety Factor of 3
Design Load

Part
No.

A

B631-18
B631-24
B631-30
B631-36
B631-42
B631-48
B631-54
B631-60
B631-72
B631-84
B631-96

18”
24”
30”
36”
42”
48”
54”
60”
72”
84”
96”

(A)
(457.2)
(609.6)
(762.0)
(914.4)
(1066.8)
(1219.2)
(1371.6)
(1524.0)
(1828.8)
(2133.6)
(2438.4)

kN

Lbs.

kg

1500
1500
1500
1500
1230
940
740
600
420
310
240

(6.67)

145
186
225
266
307
348
389
430
508
589
669

(65.8)

(6.67)
(6.67)
(5.47)
(4.18)
(3.29)
(2.67)
(1.87)
(1.38)
(1.07)

A

Wt./C

Lbs.

(6.67)

Design Load

(84.4)
(102.0)
(120.6)
(139.2)
(157.8)
(176.4)
(195.0)
(230.4)

13/4”
(44.4)

(267.2)
(303.5)

B632 - TWO HOLE STRAIGHT TUBING BRACE
• 1” (25.4) Square steel tubing
• Material: ASTM A513
• Standard finishes: ZN, GRN
Wt./C
A

(A)

Lbs.

kg

B632-18
B632-24
B632-30
B632-36
B632-42
B632-48
B632-54
B632-60
B632-72
B632-84
B632-96

18”
24”
30”
36”
42”
48”
54”
60”
72”
84”
96”

(457.2)

133
174
215
256
295
335
380
420
500
585
670

(60.3)

(609.6)
(762.0)
(914.4)
(1066.8)
(1219.2)
(1371.6)
(1524.0)
(1828.8)
(2133.6)
(2438.4)

13/4”
(44.4)

(78.9)
(97.5)
(116.1)
(133.8)

A

(151.9)
(172.3)
(190.5)
(226.8)
(265.3)
(303.9)

Reference page 72 for general fitting and standard finish specifications.

85

Strut Fittings

Part
No.

Clevis Fittings
B169

B168

B167

TWO HOLE SPLICE
CLEVIS FOR B52

THREE HOLE SPLICE
CLEVIS FOR B52

FOUR HOLE SPLICE
CLEVIS FOR B52

• Standard finishes: ZN, GRN
• Wt./C 84 Lbs. (38.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 126 Lbs. (57.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 178 Lbs. (80.7 kg)

PA

1/4”
(6.3)

31/2”
(88.9)

GRN

71/4”
(184.1)

53/8”
(136.5)
1/4”
(6.3)

1/4”
(6.3)

B170

B171

B172

TWO HOLE SPLICE
CLEVIS FOR B22 OR B52A

THREE HOLE SPLICE
CLEVIS FOR B22 OR B52A

FOUR HOLE SPLICE
CLEVIS FOR B22 OR B52A

• Standard finishes: ZN, GRN
• Wt./C 123 Lbs. (55.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 195 Lbs. (88.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 266 Lbs. (120.6 kg)

PA

1/4”

31/2”
(88.9)

ZN
GRN

53/8”
(136.5)

(6.3)

71/4”
(184.1)

1/4”
(6.3)

1/4”
(6.3)

B172-12

B172-22A

B450

FOUR HOLE SPLICE
CLEVIS FOR B12

FOUR HOLE SPLICE
CLEVIS FOR B11 OR B22A

U-WASHER

• Standard finishes: ZN, GRN
• Wt./C 326 Lbs. (147.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 406 Lbs. (184.1 kg)

PA

• Material: ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN

H

GRN

Hole Size
15/32”

Strut Fittings

(11.9)

11 Gauge (3.1)

Part No.
& Size

71/4”

71/4”
(184.1)

(184.1)
1/4”
(6.3)

1/4”
(6.3)

PA

Preassembled fitting.

Hole Size
H

B450-1/4

5/16”

B450-3/8
B450-1/2
B450-5/8
B450-3/4

7/16” (11.1)
9/16” (14.3)

Reference page 72 for general fitting and standard finish specifications.

86

15/8”
(41.3)

(7.9)

11/16” (17.4)
13/16” (20.6)

Wt./C
Lbs.

kg

14
14
13
13
13

(6.3)
(6.3)
(5.8)
(5.8)
(5.8)

‘U’ Fittings
B527

B116-52

B116-42

THREE HOLE OFFSET PLATE
CONNECTION

THREE HOLE U-SUPPORT

THREE HOLE U-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 70 Lbs. (31.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 75 Lbs. (34.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 54 Lbs. (24.5 kg)

1/2”
(12.7)

13/16”

1”

(20.6)

(25.4)

57/16”
(138.1)

57/16”
(138.1)

55/16”
(134.9)

B116-32

B116-32A

B116-12

THREE HOLE U-SUPPORT

THREE HOLE U-SUPPORT

THREE HOLE U-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 84 Lbs. (38.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 116 Lbs. (52.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 108 Lbs. (49.0 kg)

23/4”
(69.8)

13/8”

27/16”
(61.9)

(34.9)

57/16”
(138.1)

57/16”
(138.1)

57/16”
(138.1)

B107

B107-22A

B588

FIVE HOLE U-SUPPORT

THREE HOLE U-SUPPORT

THREE HOLE U-SUPPORT

• Standard finishes: ZN, GRN, HDG
• Wt./C 85 Lbs. (38.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 126 Lbs. (57.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 157 Lbs. (71.2 kg)

PA

ZN
GRN

15/8”
(41.3)

57/16”
(138.1)

47/8”
(123.8)

Strut Fittings

31/4”
(82.5)

57/16”
(138.1)

57/16”
(138.1)

Reference page 72 for general fitting and standard finish specifications.

87

PA

Preassembled fitting.

‘U’ Fittings
B412

B107S

B596

THREE HOLE
OFFSET U-SUPPORT

FIVE HOLE U-SUPPORT

THREE HOLE SWIVEL CLEVIS

• Material: 7 Gauge (4.5)
ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN, GRN
• Wt./C 51 Lbs. (23.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 89 Lbs. (40.3 kg)

57/16”
(138.1)

33/4”
(95.2)

13/16”
(20.6)

13/8”
1” (34.9)

17/8”

(25.4)

(47.6)

13/4”
(44.4)

21/4”
(57.1)

7/16” (11.1) Dia.
4 Holes
9/16” (14.3) Dia.

15/8”
(41.3)

15/8”
(41.3)

B578

B594

B266

THREE HOLE LIGHT-WEIGHT
U-SUPPORT

FIVE HOLE U-SUPPORT

SIX HOLE U-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 106 Lbs. (48.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 105 Lbs. (47.6 kg)

• Material: 10 Gauge (3.4)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 18 Lbs. (8.1 kg)

17/8”

35/16”

121/32”

(84.1)

(42.1)

(47.6)

311/16”
(93.6)

3/4”
(19.0)

15/8”
(41.3)

13/32”
(10.3)
9/32” (7.1)
Dia. 3 Holes

15/8”
(41.3)

71/32”
(178.6)

111/16”

35/16”

71/16”

(42.8)

(84.1)

(179.4)

B425

B581

B519

SIX HOLE U-SUPPORT

EIGHT HOLE U-SUPPORT

EIGHT HOLE U-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 167 Lbs. (75.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 201 Lbs. (91.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 266 Lbs. (102.5 kg)

111/16”
Strut Fittings

(42.9)

31/2”
(88.9)

31/2”
(88.9)

15/8”
(41.3)

31/2”
(88.9)

31/2”
(88.9)
15/8”
(41.3)

57/16”
(138.1)

71/16”
(179.4)
513/32”
(137.3)

Reference page 72 for general fitting and standard finish specifications.

88

‘U’ Fittings
B333

B451

SLOTTED THREE HOLE
U-SUPPORT FOR B22

SLOTTED THREE HOLE U-SUPPORT WITH
GUSSET FOR B22

A

• Standard finishes: ZN, GRN

• Consists of B333-1, 2, or 3 with
gusset plate welded on back.
• Material: ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN

C

9/16”

A

x 11/2”

(14.3)

Slots-(2)
(38.1)
9/16”

x 11/2”

(14.3)

Slots-(2)
(38.1)

15/8”
(41.3)

B
Part
No.

Wt./C
A

B333-1
B333-2
B333-3

(A)

B

(B)

C

71/2” (190.5) 15/16” (33.3)
81/2” (215.9) 115/16” (49.2)
103/8” (263.5) 27/8” (73.0)

(C)

Lbs.

27/8”

(73.0) 103
33/8” (85.7) 115
45/16” (109.5) 135

Part
No.

kg

B451-1
B451-2
B451-3

(46.7)
(52.1)
(61.2)

B408

Wt./C
A

(A)

1

7 /2” (190.5)
81/2” (215.9)
103/8” (263.5)

Lbs.

kg

137
156
172

(62.1)
(70.7)
(78.0)

B358

TWO HOLE BUS DUCT CLEVIS

TWO HOLE CLEVIS

1/2”

• Standard finishes: ZN, GRN

(12.7)

13/16”

• Standard finishes: ZN, GRN

(20.6)
9/16” (14.3) DIA.
2 HOLES

17/8”
(47.6)

17/8”
(47.6)

A

Part
No.

A

Wt./C
A

B408-1
B408-2
B408-3

(A)

Lbs.

213/32” (61.1) 58
325/32” (96.0) 76
43/4” (762.0) 88

kg
(26.3)

13/16”
(20.6)

(34.5)
(39.9)

Part
No.

A

Wt./C

B358-4
B358-5
B358-6
B358-7
B358-8

4”
5”
6”
7”
8”

(A)

Lbs.

89
93
(152.4) 106
(177.8) 118
(203.2) 132

kg

(101.6)

(40.3)

(127.0)

(42.2)
(48.1)

13/16”

(53.5)

(20.6)

(59.9)

B173

B595

B405

FOUR HOLE CLEVIS

THREE HOLE CLEVIS

• Standard finishes: ZN, GRN
• Wt./C 71 Lbs. (32.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 75 Lbs. (34.0 kg)

THREE HOLE
SUSPENSION CLEVIS
• Standard finishes: ZN, GRN
• Wt./C 75 Lbs. (34.0 kg)

37/16”

17/8”

(87.3)

(47.6)

129/32”
35/16”
(84.1)

121/32”
(42.0)

(48.4)

35/16”

121/32”
(42.0)

(84.1)

17/8”
(47.6)
Reference page 72 for general fitting and standard finish specifications.

89

Strut Fittings

17/8”
(47.6)

‘U’ Fittings
B398-1

B415

THREE HOLE CUP SUPPORT

TWO HOLE BUS DUCT
CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 73 Lbs. (33.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 56 Lbs. (25.4 kg)

17/8”
(47.6)

111/16”
(42.9)

23/32”
(53.2)

11/16”
(27.0)

15/8”
(41.3)

111/16”

325/32”

(42.9)

(96.0)

1/2”
(12.7)

11/16”
(27.0)

B400

B400-1

B400-2

THREE STUD
RING CONNECTION

ONE STUD
RING CONNECTION

ONE STUD
RING CONNECTION

• 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN
• Wt./C 85 Lbs. (38.5 kg)

• 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN
• Wt./C 53 Lbs. (24.0 kg)

• 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN
• Wt./C 40 Lbs. (18.1 kg)

111/16”
23/16”

(42.9)

111/16”

(42.9)

17/8”

17/8”
(47.6)

(47.6)

(42.9)

(55.6)

Strut Fittings

111/16”

B400-3

B400-4

B536

TWO STUD
RING CONNECTION

TWO STUD
RING CONNECTION

TAPPED U-SUPPORT

• 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN
• Wt./C 59 Lbs. (26.7 kg)

• 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN
• Wt./C 59 Lbs. (26.7 kg)

• Standard finishes: ZN
• Wt./C 87 Lbs. (39.4 kg)

15/8”
(41.3)
111/16”
(42.9)

111/16”
(42.9)

111/16”
(42.9)

111/16”
(42.9)

59/16”
(141.3)
Tapped 5/16”-18
(2) Holes

Reference page 72 for general fitting and standard finish specifications.

90

‘Z’ Fittings
B526

B106-52

B106-42

TWO HOLE
OFFSET Z-SUPPORT

TWO HOLE
Z-SUPPORT FOR B52

TWO HOLE
Z-SUPPORT FOR B42

• Standard finishes: ZN, GRN
• Wt./C 38 Lbs. (17.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 40 Lbs. (18.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 44 Lbs. (20.0 kg)

1/4”
(6.3)

315/32”

13/16”

1”

(20.6)

(25.4)

(88.1)

15/8”

31/2”
(88.9)

31/2”
(88.9)

(41.3)

B106-32

B106-12

B105

TWO HOLE
Z-SUPPORT FOR B32

TWO HOLE
Z-SUPPORT FOR B12

THREE HOLE
Z-SUPPORT FOR B22

• Standard finishes: ZN, GRN
• Wt./C 51 Lbs. (23.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 63 Lbs. (28.6 kg)

• Standard finishes: ZN, GRN, HDG
• Wt./C 51 Lbs. (23.1 kg)

15/8”
(41.3)
27/16”

13/8”
(34.9)

(61.9)

31/2”

31/2”
(88.9)

31/2”

(88.9)

(88.9)

B110

B586

B108

THREE HOLE
Z-SUPPORT FOR B11

TWO HOLE
Z-SUPPORT

TWO HOLE
OFFSET Z-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 70 Lbs. (31.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 90 Lbs. (40.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 55 Lbs. (24.9 kg)

31/2”
(88.9)

31/2”
(88.9)

47/8”

15/8”

(123.8)

Strut Fittings

31/2”
(88.9)

21/8”
(54.0)

(41.3)

31/2”
(88.9)
15/8”
(41.3)
Reference page 72 for general fitting and standard finish specifications.

91

‘Z’ Fittings
B387

B407

TWO HOLE Z-BUS DUCT CONNECTION

TWO HOLE Z-SUPPORT

• Standard finishes: ZN, GRN

• Standard finishes: ZN, GRN

15/8”

31/2”
(88.9)

(41.3)

15/8”
(41.3)

31/2”
(88.9)
1/2”
(12.7)

Part No.
B387
B387-1
B387-2

A

(A)

Lbs.

43/4” (120.6)
325/32” (96.0)
213/32” (61.1)

kg

89 (40.3)
78 (35.4)
62 (28.1)

Wt./C
Part No.

A

B407-4
4”
B407-5
5”
B407-6
6”
B407-7
7”
B407-8
8”
B407-95/8 95/8”

Wt./C

A

A

(A)

Lbs.

kg

(101.6)

77
95
98
105
120
138

(34.9)

(127.0)
(152.4)
(177.8)
(203.2)
(244.5)

(43.1)
(44.4)
(47.6)
(54.4)
(62.6)

B534

B535

B111

TAPPED Z-SUPPORT

TAPPED Z-SUPPORT

• Standard finishes: ZN
• Wt./C 51 Lbs. (23.1 kg)

• Standard finishes: ZN
• Wt./C 50 Lbs. (22.7 kg)

THREE HOLE SHEATH
CORNER CONNECTION

15/8”

15/8”

15/8”

(41.3)

• Standard finishes: ZN, GRN
• Wt./C 68 Lbs. (30.8 kg)

31/2”
(88.9)

15/8”

(41.3)

(41.3)

(41.3)

15/8”
(41.3)

15/8”

15/8”

31/2”
(88.9)

(41.3)

(41.3)

5/16”-18
5/16”-18

Tapped
Holes (2)

Tapped Hole

Strut Fittings

15/8”
(41.3)

B538

B539

TAPPED CORNER CONNECTION

TAPPED CORNER CONNECTION

• Standard finishes: ZN
• Wt./C 71 Lbs. (32.2 kg)

• Standard finishes: ZN
• Wt./C 68 Lbs. (30.8 kg)

15/8”
(41.3)
17/8”
(47.6)

5/16”-18 Tapped

15/8”

Holes (4)

(41.3)

17/8”
(47.6)

31/2”
(88.9)

31/2”
(88.9)

5/16”-18 Tapped

Holes (2)

Reference page 72 for general fitting and standard finish specifications.

92

‘Z’ Fittings
B410-52

B410-32

B410-22

CHANNEL HANGER
BRACKET FOR B52

CHANNEL HANGER
BRACKET FOR B32

CHANNEL HANGER
BRACKET FOR B22

• Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 6.7 Lbs. (3.0 kg)

• Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 8.3 Lbs. (3.7 kg)

• Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 9 Lbs. (4.1 kg)

13/16”

9/32” (7.1)

13/16”

13/16”

(20.6)

(20.6)

(20.6)

Dia. Hole

9/32” (7.1)

9/32” (7.1)
Dia. Hole

13/16”
(20.6)

Dia. Hole

13/8”

15/8”

(34.9)

(41.3)

B410-12

B410-11

B580

CHANNEL HANGER
BRACKET FOR B12

CHANNEL HANGER
BRACKET FOR B11

FIVE HOLE
GUSSETTED Z-SUPPORT

• Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 11.2 Lbs. (5.1 kg)

• Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 13.4 Lbs. (6.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

9/32” (7.1)

13/16”

Dia. Hole

(20.6)

31/2”
(88.9)

13/16”
(20.6)

31/2”
(88.9)

9/32” (7.1)
Dia. Hole

31/4”
(82.5)

27/16”
(61.9)

15/8”
(41.3)

B515

B428

ADJUSTABLE OFFSET
GUSSETTED Z-SUPPORT

EIGHT HOLE GUSSETTED
CORNER CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 93 Lbs. (42.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 203 Lbs. (92.1 kg)

15/32”

31/2”
(88.9)

9/16”

37/8”
(98.4)

53/4”
(146.0)

(47.6)

x 29/16”

(14.3)

Slots

Strut Fittings

(11.9)

53/4”
(146.0)

17/8”

(65.1)

17/8”
(47.6)
31/2”
(88.9)

Reference page 72 for general fitting and standard finish specifications.

93

Wing Fittings
B267R

B267L

B270R

THREE HOLE SINGLE CORNER
CONNECTION (RIGHT HAND)

THREE HOLE SINGLE CORNER
CONNECTION (LEFT HAND)

FOUR HOLE SINGLE CORNER
CONNECTION (RIGHT HAND)

• Standard finishes: ZN, GRN
• Wt./C 54 Lbs. (24.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 54 Lbs. (24.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 77 Lbs. (34.9 kg)

111/16”
21/16”

21/16”

(52.4)

(52.4)

(42.8)

21/16”
(52.4)

15/8”
(41.3)

15/8”
(41.3)

31/2”
(88.9)

31/2”
(88.9)

313/16”
(96.8)

B270L

B268R

B268L

FOUR HOLE SINGLE CORNER
CONNECTION (LEFT HAND)

FIVE HOLE SINGLE CORNER
CONNECTION (RIGHT HAND)

FIVE HOLE SINGLE CORNER
CONNECTION (LEFT HAND)

• Standard finishes: ZN, GRN
• Wt./C 77 Lbs. (34.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)

111/16”
(42.8)

21/16”

315/16”

(52.4)

15/8”

315/16”

(100.0)

(100.0)

(41.3)

313/16”

15/8”
(41.3)

31/2”
(88.9)

(96.8)

31/2”
(88.9)

B269R

B269L

B119

SIX HOLE SINGLE CORNER
CONNECTION (RIGHT HAND)

SIX HOLE SINGLE CORNER
CONNECTION (LEFT HAND)

FOUR HOLE DOUBLE
CORNER CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 120 Lbs. (54.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 120 Lbs. (54.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 71 Lbs. (32.2 kg)

31/2”
(88.9)

Strut Fittings

31/2”
(88.9)

315/16”

315/16”

(100.0)

(100.0)

21/16”

15/8”

(52.4)

(41.3)

53/8”
(136.5)

53/8”
(136.5)

Reference page 72 for general fitting and standard finish specifications.

94

31/2”
(88.9)

Wing Fittings
B120

B121

B271

SIX HOLE DOUBLE
CORNER CONNECTION

EIGHT HOLE DOUBLE
CORNER CONNECTION

FIVE HOLE DOUBLE
WING CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 110 Lbs. (49.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 152 Lbs. (68.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 95 Lbs. (43.1 kg)

57/16”
(138.1)

15/8”

31/2”
(88.9)

315/16”

(41.3)

(100.0)

315/16”

21/16”

(100.0)

(52.4)

15/8”
(41.3)
31/2”

53/8”

(88.9)

(136.5)

111/16”
(42.8)

B272

B273

B122

EIGHT HOLE DOUBLE
WING CONNECTION

TEN HOLE DOUBLE
WING CONNECTION

SIX HOLE TRIPLE
WING CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 156 Lbs. (70.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 185 Lbs. (83.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 110 Lbs. (49.9 kg)

57/16”

93/16”

(138.1)

(233.4)

57/16”
(138.1)

315/16”
15/8”

315/16”

(100.0)

31/2”

(41.3)

21/16”

(100.0)

(52.4)

(88.9)

15/8”
111/16”

111/16”

111/16”

(42.8)

(42.8)

(42.8)

(41.3)

B123

B124

B276

TWELVE HOLE TRIPLE
WING CONNECTION

NINE HOLE TRIPLE
WING CONNECTION

FOURTEEN HOLE DOUBLE CORNER
GUSSETTED CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 234 Lbs. (106.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 177 Lbs. (80.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 196 Lbs. (88.9 kg)

57/16”
(138.1)

93/16”
(233.4)

31/2”
(88.9)

315/16”

315/16”

(100.0)

15/8”

(100.0)

(41.3)

111/16”
(42.8)

111/16”

4”
(101.6)

(42.8)

Reference page 72 for general fitting and standard finish specifications.

95

Strut Fittings

4”
(101.6)

Wing Fittings
B274R

B274L

B495

EIGHT HOLE SINGLE CORNER
GUSSETTED CONNECTION
(RIGHT HAND)

EIGHT HOLE SINGLE CORNER
GUSSETTED CONNECTION
(LEFT HAND)

TEN HOLE DOUBLE WING
GUSSETTED CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 176 Lbs. (79.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 176 Lbs. (79.8 kg)

511/16”

• Standard finishes: ZN, GRN
• Wt./C 240 Lbs. (108.8 kg)

93/16”
(233.4)

521/32”

(144.5)

(143.7)

315/16”
(100.0)

31/2”

37/8”
(98.4)

315/16”
(100.0)

31/2”
(88.9)

31/2”

(88.9)

(88.9)

111/16”

111/16”

(42.8)

(42.8)

111/16”
(42.8)

B277

B362

B571

TWELVE HOLE TRIPLE WING
GUSSETTED CONNECTION

EIGHT HOLE DOUBLE CORNER
GUSSETTED CONNECTION

EIGHT HOLE WING
CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 285 Lbs. (129.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 226 Lbs. (102.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 201 Lbs. (91.2 kg)

93/16”
(233.4)

53/8”
(136.5)
4”
(101.6)

315/16”
31/2”

315/16”

(100.0)

(100.0)

31/2”

(88.9)

(88.9)

15/8”
(41.3)

111/16”
(42.8)

4”
(101.6)

B346R

EIGHT HOLE DOUBLE CORNER GUSSETTED
CONNECTION (LEFT HAND)

EIGHT HOLE DOUBLE CORNER GUSSETTED
CONNECTION (RIGHT HAND)

• Standard finishes: ZN, GRN
• Wt./C 242 Lbs. (109.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 242 Lbs. (109.8 kg)

Strut Fittings

B346L

53/8”
(136.5)

31/2”
(88.9)

31/2”
(88.9)

Reference page 72 for general fitting and standard finish specifications.

96

53/8”
(136.5)

Post Bases
B279

B279SQ

B279FL

POST BASE FOR B22

POST BASE FOR B22

POST BASE FOR B22

• Standard finishes: ZN, GRN
• Wt./C 314 Lbs. (142.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 314 Lbs. (142.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 230 Lbs. (104.3 kg)
3/4” (19.0)
Dia .2 Holes

111/16”
(42.8)

3/4” (19.0)
Dia .4 Holes

111/16”
(42.8)

6”
(152.4)

111/16”

3/4” (19.0)
Dia .4 Holes

15/8”
(41.3)

(41.3)

41/4”
(107.9)

6”

8”

41/4”

(203.2)

(107.9)

(152.4)

6”

(42.8)

15/8”

61/4”
(158.7)

3”

6”

(152.4)

(76.2)

(152.4)

3”

15/8”
(41.3)

(76.2)

B280

B280SQ

B280FL

POST BASE FOR B22

POST BASE FOR B22

POST BASE FOR B22

• Standard finishes: ZN, GRN, HDG,
SS4, AL
• Wt./C 392 Lbs. (177.8 kg)

• Standard finishes: ZN, GRN, HDG,
SS4, AL
• Wt./C 392 Lbs. (177.8 kg)

• Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 312 Lbs. (141.5 kg)

111/16”
3/4” (19.0)
Dia .4 Holes

111/16”

(42.8)

111/16”
(42.8)

3/4” (19.0)
Dia .2 Holes

3/4” (19.0)
Dia .4 Holes

31/2”

31/2”
(88.9)

(88.9)

6”

(42.8)

(152.4)

6”
6”

41/4”
(107.9)

41/4”
(107.9)

(152.4)

(152.4)

3”

61/4”

8”

31/2”
(88.9)

(158.7)

(203.2)

6”

3”

(152.4)

(76.2)

(76.2)

B281A

B281ASQ

B281AFL

POST BASE FOR B22A, B, C, ETC.

POST BASE FOR B22A, B, C, ETC.

POST BASE FOR B22A, B, C, ETC.

• Standard finishes: ZN, GRN
• Wt./C 330 Lbs. (149.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 330 Lbs. (149.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 250 Lbs. (113.4 kg)

3/4” (19.0)
Dia .4 Holes

35/16”

15/8”

35/16”

(41.3)

(84.1)

3/4” (19.0)
Dia .4 Holes

35/16”
(84.1)

15/8”
(41.3)

6”
41/4”

(152.4)

(107.9)

41/4”
(107.9)

6”
(152.4)

8”
6”

15/8”
(41.3)

(158.7)

(203.2)

(152.4)

6”
(152.4)

61/4”

3”
(76.2)

3”
(76.2)

Reference page 72 for general fitting and standard finish specifications.

97

Strut Fittings

3/4” (19.0)
Dia .2 Holes

(84.1)

Post Bases
B281

B281SQ

B281FL

POST BASE FOR B22A, B, C,
ETC.

POST BASE FOR B22A, B, C,
ETC.

POST BASE FOR B22A, B, C,
ETC.

• Standard finishes: ZN, GRN, HDG
• Wt./C 400 Lbs. (181.4 kg)

• Standard finishes: ZN, GRN, HDG,
SS4
• Wt./C 400 Lbs. (181.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 320 Lbs. (145.1 kg)

3/4” (19.0)

35/16”

Dia. 4 Holes

(84.1)

35/16”
31/2”

(84.1)

(88.9)

3/4” (19.0)

3/4” (19.0)

Dia. 4 Holes

Dia. 2 Holes

35/16”
(84.1)

31/2”
(88.9)

6”

31/2”
(88.9)

(152.4)

41/4”

6”
(152.4)

41/4”

(107.9)

(107.9) 6”
(152.4)

6”
(152.4)

8”

61/4”
(158.7)

(203.2)

3”

3”

(76.2)

(76.2)

B281M

B281MSQ

B570

POST BASE FOR B22-2PL

POST BASE FOR B22-2PL

• Standard finishes: ZN, GRN
• Wt./C 470 Lbs. (213.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 470 Lbs. (213.2 kg)

POST BASE FOR FOUR
CHANNEL COMBINATIONS
• Standard finishes: ZN, GRN
• Wt./C 397 Lbs. (180.1 kg)

39/16”
(90.5)
3/4” (19.0)

111/16”

Dia. 4 Holes

(42.8)
3/4” (19.0)

(88.9)

Dia. 4 Holes

31/2”

315/32”

(88.9)

6”

(87.9)

6”

6”

(152.4)

(152.4)

41/4”
(107.9)

41/4”
(107.9)
6”
(152.4)

3”

(152.4)

1/4”
(6.3)

6”
(152.4)

6”

3”

(152.4)

3/4” (19.0)
Dia. 4 Holes

(76.2)

(76.2)

B570A

B278

POST BASE FOR FOUR
POST BASE FOR B22
CHANNEL COMBINATIONS • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN
• Wt./C 550 Lbs. (249.5 kg)

Strut Fittings

15/8”
(41.3)

31/2”

31/2”
(88.9)

• Wt./C 288 Lbs. (130.6 kg)

7/16”

(11.1) Dia.
4 Holes

B300

B585
POST BASE FOR B22A

POST BASE

• Standard finishes: ZN, GRN
• Wt./C 97 Lbs. (44.0 kg)

• Material: Malleable Iron
• Standard finishes: ZN, GRN
• Wt./C 259 Lbs. (117.5 kg)

4”

15/8”

(101.6)

(41.3)

13/4”
(44.4)

31/2”
(88.9)

1/4”

3/4”
(19.0)

(6.3)

6”
(152.4)

3”
(76.2)

(152.4)

5”
(127.0)

6”

(127.0)

3/4” (19.0)

Dia. 4 Holes

15/8”

5”
31/2”

31/16”
(77.8)

(41.3)

(88.9)

Reference page 72 for general fitting and standard finish specifications.

98

7”
(177.8)

3/8” (9.5)
Countersunk
To
3/4” (19.0)
Dia.

9/16”
(14.4)

21/16”
(52.4)

Brackets
B187 BRACKET

B188 BRACKET

• Uniform Loading 1450 Lbs. (6.45 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 55/16” (150.8) Center
to Center
• Standard finishes: ZN, GRN
• Wt./C 193 Lbs. (87.5 kg)

• Uniform Loading 1080 Lbs. (4.80 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 815/16” (227.0) Center
to Center
• Standard finishes: ZN, GRN
• Wt./C 241 Lbs. (109.3 kg)

21/4”
(57.1)

11/16”
(27.0)

11/16”

21/4”
(57.1)

(27.0)

4”

9”

(101.6)

(228.6)

4”
(101.6)

12”
(304.8)

B189 BRACKET

B541 BRACKET

• Uniform Loading 870 Lbs. (3.87 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 1115/16” (303.2) Center to
Center
• Standard finishes: ZN, GRN
• Wt./C 308 Lbs. (139.7 kg)

•Uniform Loading 1240 Lbs. (5.51 kN)
•Safety Factor of 2.5
•Hole Spacing on Bracket Top 77/16” (188.9) Center to Center
•Standard finishes: ZN, GRN
•Wt./C 201 Lbs. (91.2 kg)

11/16”

11/16”
(27.0)

21/4”

(27.0)

21/4”
(57.1)

(57.1)

4”

4”

(101.6)

(101.6)

15”

101/2”
(266.7)

(381.0)

B190 12” (304.8) BRACKET

B191-18 18” (457.2) BRACKET

•
•
•
•

•
•
•
•

Uniform Loading 900 Lbs. (4.00 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 260 Lbs. (117.9 kg)

11/16”

11/16”
(27.0)

(101.6)

(27.0)
9/16”

x 3”

Slot
(14.3) (76.2)

4”
(101.6)

12”

18”

(304.8)

(457.2)

71/2”
(190.5)

71/2”
(190.5)

2”

9/16” x 3” Slot
(14.3) (76.2)

(50.8)

2”
(50.8)

Reference page 72 for general fitting and standard finish specifications.

99

Strut Fittings

4”

Uniform Loading 600 Lbs. (2.67 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 377 Lbs. (171.0 kg)

Brackets
B191-24 24” (609.6) BRACKET
•
•
•
•

11/16”
(27.0)

B192 24” (609.6) BRACKET

11/16”

Uniform Loading 450 Lbs. (2.00 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 377 Lbs. (171.0 kg)

•
•
•
•

(27.0)

Uniform Loading 820 Lbs. (3.65 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 576 Lbs. (261.3 kg)

4”
(101.6)

6”
(152.4)

24”

24”

(609.6)

(609.6)

12”
27/16”

71/2”

(61.9)

(190.5)
9/16”

(304.8)
9/16” x 3” Slot
(14.3) (76.2)

x 3”

Slot
(14.3) (76.2)

2”

2”

(50.8)

(50.8)

B290 161/2” (419.1) BRACKET

B289-12 121/2” (317.5) BRACKET

•
•
•
•

•
•
•
•

Uniform Loading 1200 Lbs. (5.34 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 405 Lbs. (183.7 kg)

Uniform Loading 1040 Lbs. (4.63 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 285 Lbs. (129.3 kg)

13/16”

13/16”

13/16”

(30.1)

(30.1)

(30.1)

13/16”
(30.1)

51/4”

6”

161/2”

(133.3)

(152.4)

31/8”

31/4”

6”

(82.5)

(152.4)

(419.1)

121/2”
31/8”

(317.5)

(79.4)

33/4”
(95.2)

(79.4)

53/4”
(146.0)

21/2”

13/16”

21/2”

(63.5)

(30.1)

(63.5)

13/16”
(30.1)

B289-14 141/2” (368.3) BRACKET

B291 181/2” (469.9) BRACKET

•
•
•
•

•
•
•
•

Uniform Loading 900 Lbs. (4.00 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 295 Lbs. (133.8 kg)

13/16”

13/16”
(30.1)

Uniform Loading 1070 Lbs. (4.76 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN
Wt./C 468 Lbs. (212.3 kg)
(30.1)

13/16”

(30.1)

Strut Fittings

(30.1)

6”
(152.4)

13/16”

31/4”
(82.5)

6”
31/8”
(79.4)

141/2”

(152.4)

(368.3)

51/4”
(133.3)

31/8”
(79.4)

53/4”

(63.5)

(469.9)

73/4”
(196.8)

(146.0)

21/2”

181/2”

21/2”
(63.5)

13/16”
(30.1)

13/16”
(30.1)

Reference page 72 for general fitting and standard finish specifications.

100

Brackets
B292 201/2” (520.7) BRACKET

B297

•
•
•
•

DOUBLE CHANNEL
BRACKET

Uniform Loading 600 Lbs. (2.67 kN)
Safety Factor of 2.5
Standard finishes: ZN, GRN, HDG, SS4
Wt./C 490 Lbs. (222.2 kg)

2”

(20.6)

(50.8)
3/8”

61/4”
(158.7)

• Safety Factor of 2.5
• Standard finishes:
ZN, GRN, HDG

13/16”
(30.1)

13/16”

(9.5)

A

13/16”
(30.1)

6”

45/8”
(117.5)

71/4”

(152.4)

(184.1)

31/8”
(79.4)

201/2”

Part
No.
B297-12
B297-18
B297-24
B297-30
B297-36
B297-42

(520.7)

73/4”
(196.8)

21/2”
(63.5)

13/16”
(30.1)

B409
SINGLE CHANNEL BRACKET
• Safety Factor of 2.5
• Standard finishes: ZN, GRN, SS4

13/16”

Uniform Load
A
12”
18”
24”
30”
36”
42”

(304.8)
(457.2)
(609.6)
(762.0)
(914.4)
(1066.8)

kN

Lbs.

kg

1660
1100
835
665
550
465

(7.37)
(4.88)
(3.71)
(2.95)
(2.44)
(2.06)

485
668
857
1040
1240
1440

(220.0)
(303.0)
(388.7)
(471.7)
(562.4)
(653.2)

B494
BRACED
SINGLE BRACKET

(38.1)

(20.6)

H
2”

45/8”
(117.5)

15/8”
(41.3)

(50.8)

Wt./C

Lbs.

11/2”

13/16”

(20.6)

B22A

L

• Safety Factor of 2.5
• Standard finishes:
ZN, GRN

4”

A

(101.6)

3”

B22

(76.2)

Part
No.
B409-6
B409-9
B409-12
B409-14
B409-16
B409-18
B409-24

Uniform Load
A
6”
9”
12”
14”
16”
18”
24”

Lbs.

1920
1280
960
800

(152.4)
(228.6)
(304.8)
(355.6)
(406.4)
(457.2)
(609.6)

730

640
480

kN
(8.54)
(5.69)
(4.27)
(3.56)
(3.25)
(2.84)
(2.13)

152
195
232
274
314

347
450

L&R SLOTTED BRACKET
Safety Factor of 2.5
Specify L for left or R for right bracing
Material: ASTM A1011 33,000 PSI min. yield
Standard finishes: ZN, GRN

2”

Dia. Holes

(50.8)

A
B
13/32”

2”

1”

(50.8)

(25.4)

Mounting Hole
7/16” (11.1) Dia.

x 1” Slot
(10.3) (25.4)

kg
(68.9)
(88.4)
(105.2)
(124.3)
(142.4)
(157.4)
(204.1)

Part
No.
B174SH
B175SH
B176SH
B177SH
B178SH
B179SH
B180SH
B181SH
B182SH
B183SH
B184SH
B185SH
B186SH

B42

Uniform Load
L

H
83/4”
83/4”
83/4”
111/4”
111/4”
16”
16”

12” (304.8)
18” (475.2)
24” (609.6)
30” (762.0)
36” (914.4)
42” (1066.8)
48” (1219.2)

Lbs.

(222.2) 1580
(222.2) 1000
(222.2) 996
(285.7) 924
(285.7) 864
(406.4) 580
(406.4) 500

kN

24”
26”
28”
30”
12”
14”
16”
18”
20”
22”
6”
8”
10”

(609.6)
(660.4)
(711.2)
(762.0)
(304.8)
(355.6)
(406.4)
(457.2)
(508.0)
(558.8)
(152.4)
(203.2)
(254.0)

B
67/16”
615/16”
77/16”
715/16”
37/16”
315/16”
47/16”
415/16”
57/16”
515/16”
115/16”
27/16”
215/16”

(163.5)
(176.2)
(188.9)
(201.6)
(87.3)
(100.0)
(112.7)
(125.4)
(138.1)
(150.8)
(49.2)
(61.9)
(74.6)

(165.1)
(217.3)
(324.8)
(420.5)
(496.7)
(635.0)
(684.9)

Wt./C

Lbs.

kN

Lbs.

kg

225
225
225
225
350
350
250
250
250
250
225
225
325

(1.00)
(1.00)
(1.00)
(1.00)
(1.55)
(1.55)
(1.11)
(1.11)
(1.11)
(1.11)
(1.00)
(1.00)
(1.44)

370
425
480
520
143
162
204
232
275
317
58
82
103

(167.8)
(192.8)
(217.7)
(235.9)
(64.8)
(73.5)
(92.5)
(105.2)
(124.7)
(143.8)
(26.3)
(37.2)
(46.7)

Right bracket shown, left bracket
gussett on opposite side.

Reference page 72 for general fitting and standard finish specifications.

101

kg

(7.02) 364
(4.45) 479
(4.43) 716
(4.11) 927
(3.84) 1095
(2.58) 1400
(2.22) 1510

Uniform Load
A

Wt. /C
Lbs.

Strut Fittings

9/32” (7.1)

Part
No.
B494-12
B494-18
B494-24
B494-30
B494-36
B494-42
B494-48

Wt./C
Lbs.

B174SH-B186SH
•
•
•
•

Inside Brace on
B494-24 and Larger.

Brackets
B196

B198

13/16”

CHANNEL
CLEVIS
BRACKET

CHANNEL CLEVIS BRACKET

(20.6)

• Safety Factor of 2.5
• Standard finishes:
ZN, GRN

• Safety Factor of 2.5 53/8”
• Standard finishes: (136.5)
ZN, GRN

13/16”
(20.6)

31/2”
(88.9)

A
35/8”

A

(92.1)

B22
Part
No.

A

Uniform Load

B196-18
B196-24

18”
24”

(A)
(457.2)
(609.6)

B22
Wt./C

Lbs.

kN

Lbs.

kg

600
450

(2.67)

430
510

(195.0)

(2.00)

(231.3)

Part
No.

A

Uniform Load

B198-6
B198-12

6”
12”

(A)
(152.4)
(304.8)

B293

CHANNEL CLEVIS BRACKET

CHANNEL BRACKET

• Safety Factor of 2.5
• Standard finishes:
ZN, GRN

• Safety Factor of 2.5
• Standard finishes:
ZN, GRN

(20.6)

kN

Lbs.

kg

1600
800

(7.12)

185
284

(128.8)

(3.56)

(83.9)

13/16”

B198A
13/16”

Wt./C

Lbs.

(20.6)

31/2”
(88.9)

11/2”
(38.1)

31/2”
(88.9)

A
A
B22
B22

Part
No.

Uniform Load
A

B198A-6
6”
B198A-12 12”

(A)

Lbs.

1600
(304.8) 800
(152.4)

B293A
CHANNEL BRACKET
• Safety Factor of 2.5
• Standard finishes:
ZN, GRN

Wt./C

kN

Lbs.

kg

(7.12)

185
284

(83.9)

(3.56)

(128.8)

(20.6)

11/2”
(38.1)

31/2”

Strut Fittings

A

Uniform Load

B293A-6
6”
B293A-12 12”
B293A-18 18”
B293A-24 24”

(A)
(152.4)
(304.8)
(457.2)
(609.6)

Lbs.

1200
600
400
300

Uniform Load

B293-6
B293-12
B293-18
B293-24

6”
12”
18”
24”

(A)
(152.4)
(304.8)
(457.2)
(609.6)

Lbs.

kN

1200
600
400
300

(5.34)
(2.67)
(1.78)
(1.33)

Wt./C
Lbs.

144
252
340
412

• Safety Factor of 2.5
• 6300 In.-Lbs (712 N•m) applies to fitting only,
not to strength of strut arm
• Refer to page 223 for strut
13/32”
loading data
(27.8)
• Standard finishes: ZN, GRN
• Wt./C 210 Lbs. (95.2 kg)

kg
(65.3)
(114.3)
(154.2)
(186.9)

kN
(5.34)
(2.67)
(1.78)
(1.33)

B22

63/8”
(161.9)

B22

A

A

B194 BRACKET FOR B22 & B24

13/16”

(88.9)

Part
No.

Part
No.

Wt./C
Lbs.

144
252
340
412

kg
(65.3)

23/16”

(114.3)

(55.6)

(154.2)

33/4”
(95.3)

(186.9)

Reference page 72 for general fitting and standard finish specifications.

102

B22

Brackets
B370

B195

BRACKET FOR B22A & B11

• Safety Factor of 2.5
13/32”
• 13000 In.-Lbs (1469 N•m) applies
(27.8)
to fitting only, not to strength of
strut arm
• Refer to page 217 for strut
loading data
• Standard finishes: ZN, GRN
• Wt./C 266 Lbs. (120.6 kg)
8”

B22

BRACKET FOR B42

• Safety Factor of 2.5
• 2500 In.-Lbs (282 N•m) applies
to fitting only, not to strength
of strut arm
• Refer to page 217 for strut
loading data
• Standard finishes: ZN, GRN
• Wt./C 174 Lbs. (78.9 kg)

(100.0)

(54.0)

37/8”
(98.4)

(203.2)

315/16”

B22

21/8”

B22A

B42

33/4”

33/4”

(95.2)

(95.2)

B440

B449-4, 8 & 12

BRACKET FOR B52 & B54

CABLE SADDLE
BRACKET

• Safety Factor of 2.5
• 2000 In.-Lbs (226 N•m) applies to fitting only,
not to strength of strut arm
• Refer to page 217 for strut loading data
• Standard finishes: ZN, GRN
B22
21/8”
• Wt./C 177 Lbs. (80.3 kg)

13/16”
(20.6)

• Safety Factor of 2.5
• Material:
11 Gauge (3.0)
ASTM A1011
HSLAS Gr. 50
• Standard finishes:
ZN, GRN

(54.0)

B
A

37/8”
(98.4)
2”
(50.8)

B52

Part
No.

33/4”

B449-18
•
•
•
•
•

Safety Factor of 2.5
Uniform Load 960 Lbs. (4.17 kN)
Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50
Standard finishes: ZN, GRN
Wt./C 312 Lbs. (141.5 kg)

B

41/2” (114.3)
81/2” (215.9)

23/8” (60.3)
23/8” (60.3)

B449-4
B449-8
B449-12 121/2” (317.5)

(95.2)

18” (457.2) CABLE SADDLE BRACKET

Uniform Load
A

4”

Lbs.

kN

Wt./C
Lbs.

kg

2400 (10.67) 74 (33.5)
1270 (5.65) 124 (56.2)
(101.6) 860 (3.82) 184 (83.4)

B293PL
BRACKET PLATE ONLY
• Standard finishes: ZN, GRN
• Wt./C 46 Lbs. (20.8 kg)

13/16”

2”
(50.8)

11/2”
(38.1)

4”
(101.6)

31/2”
(88.9)

18”

120°
13/16”

(457.2)

(20.6)

11/4”
(31.7)

Reference page 72 for general fitting and standard finish specifications.

103

Strut Fittings

(20.6)

Brackets
B816

B852S-W-D

• Standard finishes: ZN, HDG

• Specify W = 8, 12, 16
• Specify D = 6, 8, 10, 12, 16, 18, 24
• 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band
• Standard finishes: ZN, HDG

2”

13/32” (10.3) Dia.

(50.8)

61/2”
(165.1)

13/16” (20.6) Dia.

23/8”
(60.3)

21/8”
(54.0)
9/16”
(355.6)

(355.6)

725/32”

(14.3)

14”
14”

(197.6)

9/16” x 29/16” Slot

(14.3)

(65.1)

W
D

11/16” x 1” Slot
(17.4) (25.4)

13/16” x 1” Slot
(20.6) (25.4)

B802D-W

B810-W

• Specify W = 8, 12, 16
• Standard finishes: ZN, HDG

• Specify W = 8, 12, 16
• 13/16” (20.6mm) x 1” (25.6mm) banding slots for steel band
• Standard finishes: ZN, HDG

13/16” (20.6) Dia.

13/32” (10.3) Dia.

Strut Fittings

13/16” (20.6) Dia.

95/8”
(244.5)
W

725/32”
(197.6)

W

Reference page 72 for general fitting and standard finish specifications.

104

13/16” x 1” Slot
(20.6) (25.4)

Brackets
B811-W

B812-*

• Can be attached directly to B809 & B812
• Specify W = 8, 12, 16
• Standard finishes: ZN, HDG

• Specify D = 6, 8, 10, 12, 16, 18, 24
• 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band
• Standard finishes: ZN, HDG

121/32”
(42.1)
13/32” (10.3) Dia.
13/16” (20.6) Dia.

W

27/16”

725/32”

(61.9)

(197.6)
13/16” x 1” Slot
(20.6) (25.4)

D
13/16”
(20.6)

B809B-*
• Specify D = 6, 8, 10, 12, 16, 18, 24
• 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band
• Standard finishes: ZN, HDG

13/32” (10.3) Dia.
13/16” (20.6) Dia.

D

Part No.

D

H

725/32”

mm

In.

mm

B809B-6

6”

(152.4)

123/4”

(323.9)

B809B-8

8”

(203.2)

143/4”

(374.7)

(254.0)

163/4”

(425.5)

(304.8)

183/4”

(476.2)
(577.8)

B809B-10
B809B-12

10”
12”

B809B-16

16”

(406.4)

223/4”

B809B-18

18”

(457.2)

243/4”

(628.6)

B809B-24

24”

(609.6)

273/4”

(704.8)

(197.6)
13/16” x 1” Slot
(20.6) (25.4)

H

Reference page 72 for general fitting and standard finish specifications.

105

Strut Fittings

In.

Miscellaneous Fittings
B214 R&L

B514 R&L

REEL RACK SUPPORT FOR 11/4” (32)
PIPE

REEL RACK SUPPORT FOR 2” (50) PIPE
• Standard finishes: ZN, GRN
• Wt./C 246 Lbs. (111.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 200 Lbs. (90.7 kg)

3”

3”

(76.2)

(76.2)

35/8”
(92.1)

35/8”
(92.1)

53/8”
(136.5)

53/8”
(136.5)

53/8”
(136.5)

A

B214R
Right Hand

B214L
Left Hand

53/8”
(136.5)

B514R
Right Hand

B514L
Left Hand

B475

B473

DOUBLE REEL RACK SUPPORT ON
SINGLE CHANNEL FOR 11/4” (32) PIPE

DOUBLE REEL RACK SUPPORT ON
SINGLE CHANNEL FOR 2” (50) PIPE

• Standard finishes: ZN, GRN
• Wt./C 326 Lbs. (147.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 351 Lbs. (159.2 kg)

3”

3”
(76.2)

(76.2)

9”

9”

(228.6)

(228.6)

B474

B472

DOUBLE REEL RACK
CHANNEL FOR 11/4” (32) PIPE

DOUBLE REEL RACK SUPPORT ON
DOUBLE CHANNEL FOR 2” (50) PIPE

• Standard finishes: ZN, GRN
• Wt./C 257 Lbs. (116.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 299 Lbs. (135.6 kg)

31/4”
(82.5)

31/4”
Strut Fittings

(82.5)

53/8”

53/8”

(136.5)

(136.5)

Reference page 72 for general fitting and standard finish specifications.

106

Miscellaneous Fittings
B664

B438

DOUBLE PIPE SUPPORT FOR 11/4” (32) PIPE

PIPE SUPPORT BRACKET

• Standard finishes: ZN, GRN
• Wt./C 154 Lbs. (69.8 kg)

13/4”
(44.4)

• Standard finishes: ZN, GRN
• Material: ASTM A36
• Wt./C 132 Lbs. (59.9 kg)

35/16”
(84.1)

41/4”
(107.9)

Holes 9/16”(14.3)

31/2”
(88.9)

13/4”
(44.4)

325/32”

213/16”

(101.6)

(96.0)

(71.4)

B439

B411 SERIES

PIPE SUPPORT BRACKET

LADDER RUNGS

• Standard finishes: ZN, GRN
• Wt./C 88 Lbs. (39.9 kg)

• Standard finishes: ZN, GRN

13/16”
(20.6)

31/2”

(88.9)

A

13/16”
(20.6)
1/4”
(6.3)

4”

(101.6)

Part No.

• Standard finishes: ZN, GRN

B

A

2” I.D.

(A)

(304.8)
(381.0)
(457.2)

Wt./C

Lbs.

176
202
234

(91.6)

(106.1)

PIPE COUPLING FITTING
• Safety Factor of 2.5
• Standard finishes: ZN, GRN

Design Load

(50.8)

(A)

(60.3)
(111.1)
(161.9)
(212.7)
(263.5)

B
6”
8”
10”
12”
14”

(B)

(152.4)
(203.2)
(254.0)
(304.8)
(355.6)

C
75/8”
95/8”
115/8”
135/8”
155/8”

(C)

(193.7)
(244.5)
(295.3)
(346.1)
(396.9)

(68.2)

Wt./C

Lbs.

110
164
200
253
318

kg
(49.9)
(74.4)
(90.7)
(114.7)
(144.2)

Part
No.
B587-1/2
B587-3/4
B587-1

For
Pipe Size
1/2”
(15)
3/4”
(20)
1”
(25)

Wt./C

Lbs.

77
84
105

Reference page 72 for general fitting and standard finish specifications.

107

kg

Design
Load

Lbs.

kN

1000 (4.45)
(38.1) 1400 (6.23)
(47.6) 1900 (8.45)
(34.9)

Strut Fittings

53/8”
(136.5)

211/16”
A
23/8”
43/8”
63/8”
83/8”
103/8”

kg

(79.8)

B587-1/2, 3/4 & 1

13/16”
(20.6)

WALL LADDER BRACKETS
C

A

B411-12 12”
B411-15 15”
B411-18 18”

B381-B385

Part
No.
B381
B382
B383
B384
B385

3/8”
(9.5)

4”

Miscellaneous Fittings
B349

B350

TROLLEY BEAM SUPPORT

TROLLEY BEAM JOINT SUPPORT

• Design Load 1200 Lbs. (5.34 kN)
• Safety Factor of 2.5
• Use 3/8” x 3” bolts in side hole to clamp strut
together (not included)
• Standard finishes: ZN, GRN
9/16”(14.3) Dia.
• Wt./C 107 Lbs. (48.5 kg)

• Design Load 1200 Lbs. (5.34 kN)
• Use 3/8” x 3” bolts in side hole to clamp strut 21/8”
(54.0)
together (not included)
• Standard finishes: ZN, GRN
9/16”(14.3) Dia.
• Wt./C 233 Lbs. (105.7 kg)

21/8”
(54.0)

1 Hole

315/16”

1 Hole

7/16”(11.1) Dia.
6 Holes

11/32”

2 Holes

(26.2)

(26.2)

13/32”

15/8”
121/32”

(41.3)

121/32”
(42.0)

(42.0)

B614

COLUMN SUPPORT FOR B22
• Quick installation (one bolt to tighten)
• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B22 and B24 Channel
• Sold in pairs
• Standard finish: ZN
• Wt./C 50 Lbs. (22.6 kg)

(100.0)

(88.9)

7/16”(11.1) Dia.

11/32”

315/16”

31/2”

(100.0)

21/32” (27.8)
(16.7)

B613

B613A

COLUMN SUPPORT FOR B22

COLUMN SUPPORT FOR B52

• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B22 and B24 Channel
• Setscrews to be torqued to 19 ft./Lbs
• Sold in pairs
• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B52 and B54 Channel
• Setscrews to be torqued to 19 ft./Lbs
• Sold in pairs
• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

15/8”
(41.3)

15/8”
(41.3)

31/2”
(88.9)
3/8” x 2” Cone

3/8” x 2” Cone

Point
Setscrews

Point
Setscrews

B560

B562

45° STAIR SUPPORT

37-1/2° STAIR SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 220 Lbs. (99.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 206 Lbs. (93.4 kg)

87/8”
(225.4)

87/8”
(225.4)

Strut Fittings

31/2”
(88.9)

31/2”
31/2”

(88.9)

11/16”
(27.0)

17/8”

(88.9)
13/16”

31/2”

45°

13/16”

(47.6)

31/2”
(88.9)

11/16”
(27.0)

(88.9)
371/2°

(20.6)

(20.6)

33/4”

33/4”
(95.2)

(95.2)

Reference page 72 for general fitting and standard finish specifications.

108

17/8”
(47.6)

Miscellaneous Fittings
B376

35/16”

FOUR BEARING TROLLEY
ASSEMBLY

B377

15/16”

(84.1)

TWO BEARING TROLLEY ASSEMBLY

(33.3)

• Safety Factor of 2.5
• Stainless steel ball bearings
• Not for continuous cycling
Bearing O.D.
applications
13/16”
• Standard finishes: ZN
• Wt./C 48 Lbs. (21.8 kg)
(20.6)

• Safety Factor of 2.5
• Stainless steel ball bearings
• Not for continuous cycling
applications
• Standard finishes: ZN
33/8”
• Wt./C 110 Lbs. (49.9 kg) (85.7)

11/8” (28.6)

15/16”

31/8”

300
450
600

(1.33)
(2.00)
(2.67)

(23.8)

(79.4)

Design Load

@600
@300
@100

Lbs.

kN

RPM

150
225
437

(.67)
(1.00)

@600
@300
@100

(1.94)

13/16”
(20.6)

11/4”
(31.7)

Design Load

B478

TWO BEARING LIGHT DUTY
TROLLEY ASSEMBLY

FOUR BEARING LIGHT DUTY
TROLLEY ASSEMBLY

•
•
•
•
•

Design Load 50 Lbs. (.22 kN)
Safety Factor of 2.5
Stainless steel ball bearings
Not for continuous cycling applications
Material:12 Gauge (2.6) ASTM A1011
33,000 PSI min. yield
• Standard finishes: ZN
• Wt./C 30 Lbs. (13.6 kg)

11/4”
(31.7)

11/8”
(28.6)

13/4”
(44.4)

B477P

•
•
•
•
•

Design Load 100 Lbs. (.44 kN)
Safety Factor of 2.5
Stainless steel ball bearings
Not for continuous cycling applications
Material:12 Gauge (2.6) ASTM A1011
33,000 PSI min. yield
• Standard finishes: ZN
• Wt./C 68 Lbs. (30.8 kg)

B478P

WITH PLASTIC
BEARINGS

11/32”

• Design Load
10 Lbs. (.045 kN)

5/8”
(15.9)

9/32” (7.1)

Dia. Hole
(19.0)

(28.6)
Bearing O.D.

Design Load in B22
RPM

B477

3/4”

11/8”
33/8”
(85.7)

Design Load in B22
kN

(33.3)

5/8”
(15.9)

Lbs.

15/16”

(8.7)

WITH PLASTIC
BEARINGS
• Design Load
20 Lbs. (.090 kN)

9/32”

x 9/16”

(7.1)

(14.3)

(7.1)
Dia. Hole

Slot-(2)
3/4”
(19.0)

11/4”
(31.7)

9/32”

3”
(76.2)

2”
(50.8)

Design Load

Design Load

B478H

B477H

FOUR BEARING LIGHT DUTY
TROLLEY ASSEMBLY WITH EYE HOOK

TWO BEARING LIGHT DUTY
TROLLEY ASSEMBLY WITH EYE HOOK
•
•
•
•
•

(31.7)

11/8”
(28.6)

B477HP

WITH PLASTIC
BEARINGS
• Design Load
10 Lbs. (.045 kN)

3/4” I.D
(19.0)

•
•
•
•
•

11/4”

Design Load 100 Lbs. (.44 kN)
Safety Factor of 2.5
Stainless steel ball bearings
Not for continuous cycling applications
Material:12 Gauge (2.6) ASTM A1011
33,000 PSI min. yield
• Standard finishes: ZN
• Wt./C 72 Lbs. (32.6 kg)

B478HP

WITH PLASTIC
BEARINGS

315/16”
(100.0)

11/32”

1/4” (6.3)
EYE ROD

• Design Load
20 Lbs. (.090 kN)

(8.7)

1/4” (6.3)
EYE ROD

3/4” I.D
(19.0)

Design Load

Design Load

Reference page 72 for general fitting and standard finish specifications.

109

Strut Fittings

Design Load 50 Lbs. (.22 kN)
Safety Factor of 2.5
Stainless steel ball bearings
Not for continuous cycling applications
Material:12 Gauge (2.6) ASTM A1011
33,000 PSI min. yield
• Standard finishes: ZN
• Wt./C 36 Lbs. (16.3 kg)

Miscellaneous Fittings
B203-B206 & B220-B223

B283-B286

CHANNEL END CAPS TYPE X

A

• Material: ASTM A1011 CS Type B
• Standard finishes: ZN, GRN, HDG, SS4, AL

Part
No.
B203
B204
B205
B206
B220
B221
B222
B223

CHANNEL END CAPS
• Material: ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN, GRN

A

Wt./C
Use With

A

(A)

Lbs.

kg

B42
B54
B22
B32
B52
B12
B11
B24

1.015
.827
1.640
1.390
.827
2.452
3.265
1.640

(25.8)
(21.0)
(41.6)
(35.3)
(21.0)
(62.3)
(82.9)
(41.6)

6
5
10
8
4
15
20
10

(2.7)
(2.2)
(4.5)
(3.6)
(1.8)
(6.8)
(9.1)
(4.5)

B
Wt./C

Part
No.

Use With

A

B283
B284
B285
B286

B52
B54 & B56
B22
B24 & B26

119/32”
119/32”
119/32”
119/32”

(A)

B

(B)

(40.5) 25/32” (19.8)
(40.5) 25/32” (19.8)
(40.5) 119/32” (40.5)
(40.5) 119/32” (40.5)

B287 & B288

B3322, B3332, B3342, B3352

CHANNEL END CAPS

ANCHOR END CAPS TYPE Y

• Material: ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN, GRN

• Material: ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN

Lbs.

kg

6
6
13
14

(2.7)
(2.7)
(5.9)
(6.3)

3/8” (9.5)

119/32”

119/32”

(40.5)

(40.5)

Dia. Hole

25/8”
(66.7)

A
113/16”

B

(46.0)

Part
No.

Strut Fittings

B287
B288

Wt./C

Use With

Lbs.

kg

B22
B24

13
14

(5.9)
(6.3)

Part
No.

Use With

A

Wt./C

B3322
B3332
B3342
B3352

B22I
B32I
B42I
B52I

1.270
1.000
.645
.460

(A)

B

(32.2) 13/16”
(25.4) 13/16”
(16.4) 11/4”
(11.7) 15/16”

(B)

Lbs.

kg

(30.2)
(30.2)
(31.8)
(33.3)

15
15
15
15

(6.8)
(6.8)
(6.8)
(6.8)

B822

B822A

B852

PLASTIC END CAP
FOR B22 & B24

PLASTIC END CAP
FOR B22A & B11

PLASTIC END CAP
FOR B52

• Material: Soft White PVC
• Wt./C 3 Lbs. (1.3 kg)
• Available in colors: White (W),
Yellow (Y), Black (BLK), Gray (GRY),
Green (GRN)

• Material: Soft White PVC
• Wt./C 5 Lbs. (2.2 kg)
• Available in colors: White (W),
Yellow (Y), Black (BLK), Gray (GRY),
Green (GRN)

• Material: Soft White PVC
• Wt./C 2.5 Lbs. (1.1 kg)
• Available in colors: White (W),
Yellow (Y), Black (BLK), Gray (GRY),
Green (GRN)

11/4”
(31.7)

11/4”
(31.7)

11/4”
(31.7)

Reference page 72 for general fitting and standard finish specifications.

110

Miscellaneous Fittings
B823

B825

PROFILE END CAPS

PLASTIC END CAPS

• Material: PVC
• Available in colors: White (W),
Yellow (Y), Black (BLK), Gray (GRY),
Green (GRN)

• Material: Polyurethane
• Available in colors: Gray (GRY), Green (GRN)

Approx. 3/4” deep
(19.0)

Part No.

Fits
Channel Sizes

B823-22A B22A, B24A, B26A
B823-22
B22, B24, B26
B823-42
B42
B823-52
B52, B54, B56

Wt./C
Lbs.

kg

6.9
4.1
3.8
3.5

(3.1)
(1.8)
(1.7)

Part No.
B825-22
B825-52

(1.6)

Fits
Channel Sizes
B22 & B24
B52 & B54

Wt./C
Lbs.

kg

2.0
1.0

(0.9)
(0.4)

Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

111

Beam Clamps

Beam Clamps
Cooper B-Line’s beam attachments and pipe
supports offered in this section are designed to
provide supports without drilling or welding . A
complete selection of beam clamps, pipe clamps,
rollers, supports and accessories are designed
for use with Cooper B-Line channels and offer
many installation advantages.

Materials & Finishes (Unless otherwise
noted)
Pipe clamps, pipe hangers, beam clamps,
brackets, and rollers are made from low carbon
steel strips, plates or rod unless noted.
Finish
Code

Finish

PLN

Plain

ZN

Electro-Plated Zinc

GRN
–
HDG
CZ
SS4
SS6
AL

Dura-Green
Malleable Iron
Hot-Dipped Galvanized
Chromium Zinc
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum

Specification
ASTM A1018 Gr. 33
ASTM A1011 SS Grade 33
ASTM B633 SC3 Type III
or ASTM A653
ASTM A47 Gr. 32510
ASTM A123
ASTM F1136
ASTM A240
ASTM A240
ASTM B209

Note: A minimum order may apply on special
material and finishes.

Load Data
The load data published includes a safety factor
of 5.0 unless noted (safety factor = ratio of ultimate
load to the design load).

Recommended Torque For Setscrews
(unless noted)
Setscrew Size
Foot/Lbs.
Nm

1/4”-20

3/8”-16

1/2”-13

4
5

5
7

11
15

Setscrew Size
Foot/Lbs.
Nm

5/8”-11

3/4”-10

21
28

34
46

See chart on page 72 for bolt torque.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

112

Beam Clamps
B351L

D

STEEL C-CLAMP WITH LOCKNUT

Max. Flange
Thickness

• Safety Factor of 5
• Setscrew and locknut included
• When Retaining Strap is required, order B3362, B3363
or B3365 separately
• Standard finishes: ZN, SS4, PLN

*

3/8 Thru 3/4

Sizes Only

E
Rod Size

C
Part Number
With
Locknut
B351L-3/8 *
B351L-1/2 *
B351L-5/8 *
B351L-3/4 *
B351L-7/8

Rod
Size
A
3/8”-16
1/2”-13
5/8”11
3/4”-10
7/8”-9

B
23/8”
23/8”
23/8”
23/8”
3”

C
23/8”
23/8”
21/4”
31/4”
31/4”

(60.3)
(60.3)
(60.3)
(60.3)
(76.2)

D
3/4”
3/4”
3/4”
3/4”

(60.3)
(60.3)
(57.1)
(82.5)
(82.5)

E

(19.0)
(19.0)
(19.0)
(19.0)
(25.4)

1”

13/8”
13/8”
13/8”
13/8”
17/8”

A

Design Load
(34.9)
(34.9)
(34.9)
(34.9)
(47.6)

Wt./C

Lbs.

kg

Lbs.

kg

230
380
550
630
1200

(1.03)
(1.71)
(2.47)
(2.83)
(5.34)

41
41
60
71
184

(18.6)
(18.6)
(27.2)
(32.2)
(83.4)

3/4” (19.0)

B3036L

Max.
Flange
Thickness

C-CLAMP WITH LOCKNUT
•
•
•
•
•

Safety Factor of 5
When Retaining Strap is required, order B3363 or B3364 separately
Setscrew and locknut included
Material: Malleable iron
Standard finishes: ZN, PLN

B

ROD SIZE

A
Part Number
With
Locknut
B3036L-3/8
B3036L-1/2
B3036L-5/8
B3036L-3/4

Rod
Size
A
3/8”-16
1/2”-13
5/8”-11
3/4”-10

B
13/4”
13/4”
2”
2”

C
13/4”
13/4”
17/8”
2”

(44.4)
(44.4)
(50.8)
(50.8)

Design Load
(44.4)
(44.4)
(47.6)
(50.8)

Wt./C

C

Lbs.

kg

Lbs.

kg

300
380
530
530

(0.89)
(1.69)
(2.36)
(2.36)

29
28
55
72

(13.1)
(12.7)
(24.9)
(32.6)

3/4”

B3362 THRU B3365
RETAINING STRAP

(19.0)

B

• *When ordering specify L (Length) as a
suffix to the part number
• Material: 14 Gauge (1.9)
• Standard finishes: GALV, SS4

L
A
Part No.
B3362*
B3363*
B3364*
B3365*

6” (152.4)

Wt./C for Length L of
8” (203.2) 10” (254.0) 12” (304.8)

Lbs.

kg

Lbs.

kg

Lbs.

kg

Lbs.

kg

17
16
16
21

(7.7)
(7.2)
(7.2)
(9.5)

24
23
23
29

(10.9)
(10.4)
(10.4)
(13.1)

31
30
30
37

(14.0)
(13.6)
(13.6)
(16.8)

38
37
37
46

(17.2)
(16.8)
(16.8)
(20.8)

A
11/4”
11/4”
11/4”
11/2”

(31.7) 7/16”
(31.7) 5/8”
(31.7) 11/16”
(38.1) 3/4”

B
(11.1)
(15.9)
(17.4)
(19.0)

For Use With
B351-3/8 & 1/2
B351-5/8 & 3/4 B3036-3/8 & 1/2
B3036-5/8 & 3/4
B351-7/8

*See note above.

Reference page 112 for general fitting and standard finish specifications.

113

Beam Clamps

B

Beam Clamps
B3033

C

REVERSIBLE WIDE JAW WEDGE C-CLAMP
(MALLEABLE IRON)
•Safety Factor of 5
•Setscrew and locknut included
•Material: Malleable iron
•Standard finishes: ZN, PLN

Beam Clamps

Throat Openings
11/4” (31.7) For
3/8 & 1/2 Sizes

D

B

15/16” (33.3) For
5/8 & 3/4 Sizes
Rod Size
Throat
Opening

Part No.

Rod
Size A

B3033-3/8
B3033-1/2
B3033-5/8
B3033-3/4

3/8”-16
1/2”-13
5/8”-11
3/4”-10

Design Load
B
21/4”
25/16”
25/8”
211/16”

C
(57.1)
2”
(58.7) 23/16”
(66.7) 21/2”
(68.3) 21/2”

(50.8)
(55.5)
(63.5)
(63.5)

D
11/8”
11/4”
13/8”
17/16”

Lbs.

kN

Wt./C
Lbs.

(28.6) 500 (2.22) 46
(31.7) 810 (3.60) 64
(34.9) 1000 (4.48) 116
(36.5) 1400 (6.22) 140

kg

A

UL Max.
Pipe Size

(20.8) 4”
(29.0) 8”
(52.6) 8”
(63.5) 10”

(100)
(200)
(200)
(250)

B3034

C

WEDGE C-CLAMP
•
•
•
•
•

Safety Factor of 5
3/4” (19.0) Max. Flange Thickness
Setscrew and locknut included
Material: Malleable iron
Standard finishes: ZN, PLN

D

Note:
3/8” & 1/2” Sizes
Are Reversible
Style

B

*

3/8 & 1/2

Sizes Only
Rod Size

3/4” (19.0) Max.

A

Flange Thickness

Part No.

Rod
Size A

B3034-3/8*
B3034-1/2*
B3034-5/8
B3034-3/4

3/8”-16
1/2”-13
5/8”-11
3/4”-10

Design Load
B
15/8”
113/16”
13/4”
2”

C
(41.3)
2”
(46.0) 23/16”
(44.5) 21/8”
(50.8) 21/4”

D

(50.8) 7/8”
(55.5) 13/16”
(54.0) 11/8”
(57.2 11/8”

Lbs.

kN

(22.2) 560 (2.49)
(30.2) 810 (3.60)
(28.6) 1000 (4.48)
(28.6) 1500 (6.67)

Lbs.

Wt./C
kg

UL Max.
Pipe Size

54
51
70
98

(24.5)
(23.1)
(31.7)
(44.4)

4” (100)
8” (200)
-----

Fig. 65XT

REVERSIBLE C-TYPE BEAM CLAMP
•
•
•
•
•
•
•

Safety Factor of 5
Max. Flange Thickness
Setscrew and locknut included
Maximum Pipe Size 4” (100)
Design Load 610 Lbs. (2.71kN)
Material: Steel
Standard finishes: ZN, PLN

3/4” (19.0)

Rod Size
3/8”-16

11/16”
(27.0)

15/8”
(41.3)
3/4” (19.0) Max.
Flange Thickness

7/8”

11/2”
(38.1)

Reference page 112 for general fitting and standard finish specifications.

114

(22.2)

Beam Clamps
Fig. 69 (Formally B-Line B3367)
RETAINING STRAP

•
•
•
•

Specify ‘L’ lengths required
Minimum recommended return on strap is 1” (25.4)
Material: Pre-Galvanized Steel
Standard finishes: GALV

69-3/8-L
69-1/2-L
69-5/8-L
69-3/4-L

For Use
With
B3033-3/8

B3034-3/8

&
65XT-3/8
9/16” (30.1) B3033-1/2 & B3034-1/2
11/16” (50.8)
B3033-5/8
13/16” (63.5)
B3033-3/4
7/16” (30.1)

D

Wt./C**
Lbs.

kg

23.9 (10.8)

Beam Clamps

Part No.

Hole Dia.
D

11/4”
(31.7)

L

23.6 (10.7)
23.2 (10.5)
22.7 (10.3)

** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.

Fig. 69R
RETROFIT RETAINING STRAP
•
•
•
•

Specify ‘L’ lengths required
Minimum recommended return on strap is 1” (25.4)
Material: Pre-Galvanized Steel
Standard finishes: GALV

Part No.

Slot
Width

69R-3/8-L

7/16” (30.1)

69R-1/2-L

For Use
With

11/4”
(31.7)

L

Wt./C**
Lbs.

kg

B3033-3/8 & B3034-3/8
22.9 (10.4)
65XT-3/8
9/16” (30.1) B3033-1/2 & B3034-1/2 22.6 (10.2)

** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.

B3037Z
Z-PURLIN C-CLAMP
• Design Load 500 Lbs. (2.22 kN)
• Safety Factor of 5
• Designed for attaching a 3/8”-16 hanger rod
to the bottom flange of a Z-purlin
• Setscrew and locknut included
• Material: Malleable iron
• Standard finishes: ZN, PLN

3”
(76.2)

313/32”
(86.5)

Bottom Hanger
Rod Threads
3/8”-16

Reference page 112 for general fitting and standard finish specifications.

115

Beam Clamps
B444

Beam Clamps

SERIES ROD SUPPORT
• Safety Factor of 5
• Max. Flange Thickness
3/4” (19.0) for 1/4 & 5/16 sizes
1” (25.4) for 3/8 & 1/2 sizes
• Setscrew included
• Material: Malleable iron
• Standard finish: ZN
Available in HDG with CZ Hardware

A
(Bottom &
Back)

D
Design Load

Part No.

Thread
Size A

Set
Screw

B444-1/4

1/4”-20

1/4”-20

13/8”

(34.9)

B444-5/16
B444-3/8
B444-1/2

5/16”-18

1/4”-20

(34.9)

3/8”-16

1/2”-13

1/2”-13

5/8”-11

13/8”
17/8”
23/8”

C

D

Lbs.

kN

Lbs.

13/16” (30.1)
13/16” (30.1)

150
(.66) 24
150
(.66) 23
2” (50.8) 350 (7.12) 65
21/2” (63.5) 1000 (4.45) 132

(47.6)
(60.3)

BC442

C

Wt./C
kg
(10.9)
(10.4)
(29.5)
(59.9)

13/16”
(20.6)

LIGHT DUTY BEAM CLAMP
• Design Load 75 Lbs. (.33 kN)
• Safety Factor of 5
• 11/16” (17.5) Max. Flange Thickness
• Setscrew included
• Holes tapped 1/4”-20 (Bottom & Back)
• Material: 13 Gauge (2.3)
• Standard finish: ZN
• Wt./C 13 Lbs. (3.9 kg)

11/16”
(17.5)

13/4”
(44.5)

B210

B210A

BEAM CLAMP

BEAM CLAMP

• Design Load
800 Lbs. (3.56 kN)
• Safety Factor of 5
• 5/8” (15.9) Max. Flange Thickness
• 1/2”-13 Setscrew included
• Standard finish: ZN
• Wt./C 100 Lbs. (45.3 kg)

• Design Load
300 Lbs. (1.33 kN)
• Safety Factor of 5
• 3/4” (19.0) Max. Flange Thickness
• 3/8”-16 Setscrew included
• Standard finish: ZN
• Wt./C 60 Lbs. (27.2 kg)

5/8” (15.9)
Max. Flange
Thickness

(9.5)

1/4”
(6.3)

3/4”
(19.0)

1/2”-13

TAP
Bottom
Plate
Only

3/4” (19.0)
Max. Flange
Thickness

3/8”

1/2”
(12.7)

3/8”-16

TAP
Bottom
Plate
Only

2”
(50.8)

11/2”
(38.1)

2”
(50.8)

Reference page 112 for general fitting and standard finish specifications.

116

11/2”
(38.1)

Beam Clamps
B303 THRU B309 BEAM CLAMPS
•
•
•
•
•

Safety Factor of 5
Max. Flange Thickness 1/16” (1.6) thru 7/8” (22.2)
Setscrew included
When Retaining Strap is required, order B312 separately
Recommended Setscrew Torque: 3/8”-16 150 in-lbs. (16.9 N•m)
1/2”-13 350 in-lbs. (39.5 N•m)
• Standard finishes: ZN, HDG

Rod
Size A
1/4”-20
5/16”-18
3/8”-16
3/8”-16
1/2”-13
1/2”-13
5/8”-11

11/8”
(28.6)
Max. Flange
Thickness

Design Load

Set
Screw
3/8”-16
3/8”-16
3/8”-16
1/2”-13
1/2”-13
1/2”-13
1/2”-13

C
5
2 /16”
25/16”
25/16”
27/16”
27/16”
29/16”
29/16”

(58.7)
(58.7)
(58.7)
(61.9)
(61.9)
(65.1)
(65.1)

T
11 Ga.
11 Ga.
11 Ga.
7 Ga.
7 Ga.
1/4”
1/4”

Lbs.
(3.0)
(3.0)
(3.0)
(4.5)
(4.5)
(6.3)
(6.3)

Wt./C

kN

400
600
600
1100
1100
1500
1500

C

Lbs.

A

kg

21/2”

(1.78) 72 (32.6)
(2.67) 72 (32.6)
(2.67) 72 (32.6)
(4.89) 97 (44.0)
(4.89) 97 (44.0)
(6.67) 133 (60.3)
(6.67) 133 (60.3)

(63.5)

B321 SERIES BEAM CLAMPS
•
•
•
•
•

Safety Factor of 5
111/16” (42.8) Max. Flange Thickness
Setscrew included
When Retaining Strap is required, order B312 separately
Recommended Setscrew Torque: 1/2”-13 350 in-lbs. (39.5 N•m)
5/8”-11
700 in-lbs. (79.0 N•m)
• Minimum flange thickness: B321-1 thru B321-3 1/4” (6.3)
B321-4 and B321-5 3/8” (9.5)
• Standard finishes: ZN, HDG

15/8”
(41.3)

T

111/16” (42.8)
Max. Flange
Thickness

C
31/4”
(82.5)
A

Part No.
B321-1
B321-2
B321-3
B321-4
B321-5

Design Load

Rod
Size A

Setscrew

3/8”-16

1/2”-13

1/2”-13

1/2”-13

5/8”-11

1/2”-13

5/8”-11

5/8”-11

3/4”-10

5/8”-11

C
39/16”
39/16”
39/16”
323/32”
323/32”

T
(92.1)

1/4”

(6.3)

(92.1)

1/4”

(6.3)

(92.1)

1/4”

(6.3)

(94.4)

5/16”

(7.9)

(94.4)

5/16”

(7.9)

Lbs.

kN

1300
1400
1600
1800
2000

(5.78)
(6.23)
(7.12)
(8.00)
(8.89)

Wt./C
Lbs.

kg

187 (84.8)
186 (84.3)
185 (83.9)
239 (108.4)
238 (107.9)

B312 SERIES
RETAINING STRAP FOR USE WITH
B303 THRU B309 AND B321 SERIES
•
•
•
•

3/4” (19.0)

Max. Flange Thickness
For thicker beams, step up one flange width size
Material: 14 Gauge (1.9)
Standard finishes: GALV, HDG

Part No.
B312-6
B312-9
B312-12
B312-15

Wt./C

For Flange
Width
6”
9”
12”
15”

(152.4)
(228.6)
(304.8)
(381.0)

A
9”
12”
15”
18”

(228.6)
(304.8)
(381.0)
(457.2)

Lbs.

kg

22
30
40
49

(10.0)

13/4”
(44.4)
A

(18.1)
(22.2)

11/4”
(31.7)

Reference page 112 for general fitting and standard finish specifications.

117

1/2”
(12.7)

(13.6)
1/4”
(6.3)

Beam Clamps

Part No.
B303
B304
B305
B306
B307
B308
B309

T

Beam Clamps

Beam Clamps
B751

B752

BEAM CLAMP

BEAM CLAMP SWIVEL

•
•
•
•
•
•
•
•

•
•
•
•
•

Safety Factor of 5
3/4” (19.0) Max. Flange Thickness
Setscrew and Locknut included
Maximum ATR Size 1/2”
Use B753 Swivel Nut (not included)
Material: 12 Gauge (2.6)
Standard finish: ZN, HDG
Wt./C 42 Lbs. (19.0 kg)

Design Load 500 Lbs. (2.22 kN)
Safety Factor of 5
Material: 12 Gauge (2.6)
Use B753 Swivel Nut (not included)
Includes:
B751 Clamp (Not
1 pc. B752 Swivel Body
Included)
5
3
1 pc. /16”-18 x 1 /4” HHCS
1 pc. 5/16”-18 Hex Nut
• Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg)

1”

2”

(25.4)

(50.8)

Overall
Height
31/4”
(82.5)

3”
(76.2)

For Rod Sizes

Design Load 300 Lbs. (1.33 kN)
Design Load 500 Lbs. (2.22 kN)

1/4” (6.3) to 1/2” (12.7)

B751-J_-3/8
BEAM CLAMP ASSEMBLY
• Includes:
1 pc. B751 Beam Clamp
1 pc. B701 Type J-Hook only
1 pc. SA203-158 Clip
1 pc. 3/8”-16 Hex Nut
• 1/4” (6.3) Diameter J-Hook available upon request
Part Number changes to B751-J_-1/4 and a 1/4-20
Machine Square Nut (MSQN) is used
• Use B753 Swivel Nut (not included)
• Standard finishes: ZN

B701-J_-3/8 J-Hook

B751 Clamp

Wt./C
Part No.

For Flange Width

Lbs.

kg

B751-J4-3/8

3”-6”

(76.2-152.4)

70

(31.7)

B751-J6-3/8
B751-J9-3/8
B751-J12-3/8

5”-9”
8”-12”
11”-15”

(127.0-228.6)

78
83
88

(35.4)

(203.2-304.8)
(279.4-381.0)

(37.6)
(39.9)

B753

B701 SERIES

SWIVEL NUT

J-HOOK

• Provides a full swivel
of 15° in any direction
Specify rod size
• Standard finish: ZN

• 1/4” (6.3) Diameter J-Hook available upon request
Part Number changes to B751-J_-1/4 and a 1/4-20
Machine Square Nut (MSQN) is used
• Standard finish: ZN
B701-J_-3/8 J-Hook Only

SA203-158 Clip

A

Part No.
Part No.
B753-3/8
B753-1/2

Wt./C
For
Rod Size Lbs. kg
3/8”-16
1/2”-13

4.0
3.4

(1.8)
(1.5)

B701-J4-3/8
B701-J6-3/8
B701-J9-3/8
B701-J12-3/8

TL
3/8”-16 Hex Nut

Thread Length
TL

A
83/4”
113/4”
143/4”
173/4”

(222.2)
(298.4)
(374.6)
(450.8)

51/2”
61/2”
61/2”
61/2”

(139.7)
(165.1)
(165.1)
(165.1)

Reference page 112 for general fitting and standard finish specifications.

118

Wt./C
Lbs.

26
34
41
48

kg
(11.8)
(15.4)
(18.6)
(21.8)

Beam Clamps
B755
3/8

•
•
•
•
•

B756-3/8

BEAM CLAMP

SWING CONNECTOR

Safety Factor of 5
5/8” (15.9) Max. Flange Thickness
For 3/8”-16 Hanger Rod only.

Design Load 150 Lbs. (0.66 kN)
Safety Factor of 5
Material: 12 Gauge (2.6)
Includes:
1 pc. B756-3/8 Swing
Connector Body
1 pc. 5/16”-18 x 11/4” SHHMS
1 pc. 5/16”-18 Square Nut
• Use B753 Swivel Nut (not included)
• Standard finish: ZN
• Wt./C 15 Lbs. (6.8 kg)

Machine Nuts

1”
(25.4)

21/2”
(60.3)

3/8” (9.5) Hole

For Swing
Connector
3/8”-16 ROD

Design Load
150 Lbs. (0.66 kN)

B755 Clamp (Not Included)

Beam Clamps

Material: 12 Gauge (2.6)
Includes:
1 pc. B755 Beam Clamp
1 pc. 3/8” x 2” Square Head
Set Screw
2 pcs. 3/8” Square Nut
• Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg)

•
•
•
•

3/8”-16 Square

Overall
Height

7/8”
(22.2)

17/8”
(47.6)

Design Load
300 Lbs. (1.33 kN)

B755-3/8-J_
BEAM CLAMP ASSEMBLY
• Includes:
1 pc. B755-3/8 Beam Clamp
1 pc. B705 Type J-Hook only
1 pc. B705 Clip
1 pc. 1/4”-20 Square Nut
• Standard finish: ZN

B755 Clamp

B705-J_
J-Hook Only

B705 Clip

Wt./C
Part No.

For Flange Width

B755-3/8-J4
B755-3/8-J6
B755-3/8-J10
B755-3/8-J12

4”-6”
6”-10”
10”-12”
12”-14”

(101.6-152.4)
(152.4-254.0)
(254.0-304.8)
(304.8-355.6)

B702

B705 SERIES

CLEAT

J-HOOK

• To eliminate the swiveling of the rod
when required, use the B702 Cleat
and a locking nut. This can be used
with the B751 Beam Clamp, B752
Swivel or B756 Swing Connector.
• Material: 12 Gauge (2.6)
• Standard finish: ZN
• Wt./C 6 Lbs. (2.7 kg)

Lbs.

kg

47
51
53
55

(21.3)
(23.1)
(24.0)
(24.9)

B705-J_
J-Hook Only

• Use with B755-3/8
• Standard finish: ZN

B705 Clip

A

1/4”-20

Machine Nut

TL

17/32”
(30.9)

1”
(25.4)
13/32” (10.3)

Dia. Hole

B705-J4
B705-J6
B705-J10
B705-J12

Thread Length
TL

A

Part No.
73/8”
113/8”
133/8”
153/8”

(187.3)
(288.9)
(339.7)
(390.5)

3”
41/2”
41/2”
41/2”

(76.2)
(114.3)
(114.3)
(114.3)

Reference page 112 for general fitting and standard finish specifications.

119

Wt./C
Lbs.

17
21
23
25

kg
(7.7)
(9.5)
(10.4)
(11.3)

Beam Clamps
B750 SERIES

Beam Clamps

BEAM CLAMP

1/2”-13 Rod
& Hex
Nut Sold
Separately

• Safety Factor of 5
• Design Load 500 Lbs. (2.22 kN)
• Recommended Torque:
J-Hook Nut 125 in-lbs. (14.1 N•m)
• Maximum Flange Thickness 5/8” (15.9)
• Standard finish: ZN

7 Ga
(4.6)

Wt./C
Part No.

For Flange Width

Lbs.

15/8”

kg

127/32”
(46.8)

(41.3)

3”-6”
5”-9”
8”-12”
11”-15”

B750-J4
B750-J6
B750-J9
B750-J12

109
124
135
147

(76.2-152.4)
(127.0-228.6)
(203.2-304.8)
(279.4-381.0)

(49.4)
(56.2)
(61.2)
(66.7)

B700 SERIES
J-HOOK
• Includes:
1 pc. J-Bolt
1 pc. Hex Nut
• Maximum Flange Thickness 5/8” (15.9)
• Standard finish: ZN

1/2”-13
Threads

TL
A
Part No.

Thread Length
TL

A

B700-J4
B700-J6
B700-J9
B700-J12

81/2”

(215.9)

111/2”
141/2”
171/2”

(292.1)
(368.3)
(444.5)

63/4”

(171.4)

93/4” (247.6)
123/4” (323.8)
153/4” (400.0)

Wt./C
Lbs.

kg

44
53
63
78

(19.9)
(24.0)
(28.6)
(35.4)

B500 SERIES
SQUARE U-BOLT
• Includes:
1 pc. U-Bolt only
2 pcs. 3/8”-16 Hex Nuts
• Additional sizes available
• Standard finish: ZN, SS4

121/32”
(42.1)

21/2”
(63.5)

A
3/8”-16

Threads

Part No.
B500-3-3/8
B500-5

A
33/8”
5”

(85.7)
(127.0)

Channel
Size

Wt./C
Lbs.

kg

15/8” x 15/8”
31/4” x 15/8”

25
33

(11.3)
(14.9)

Reference page 112 for general fitting and standard finish specifications.

120

Beam Clamps
B441-22A

B314

BEAM CLAMP

BEAM CLAMP

BEAM CLAMP

• Design Load 1200 Lbs. (5.34 kN)
when used in pairs
• Safety Factor of 5
• 3/4” (19.0) Max. Flange Thickness
• For use with 13/16” (20.6) to 15/8” (41.3)
high channel
• Recommended Torque:
150 in-lbs. (16.9 N•m)
• Sold in pieces
• Other flange thickness variations
are available, contact B-Line
Engineering for sizes
• Standard finishes: ZN, HDG, SS4
• Wt./C 87 Lbs. (39.4 kg)

• Design Load 1200 Lbs. (5.34 kN)
when used in pairs
• Safety Factor of 5
• 3/4” (19.0) Max. Flange Thickness
• For use with 15/8” (41.3) to 31/4” (82.5)
high channel
• Recommended Torque:
150 in-lbs. (16.9 N•m)
• Sold in pieces
• Other flange thickness variations
are available, contact B-Line
Engineering for sizes
• Standard finishes: ZN, HDG, SS4
• Wt./C 93 Lbs. (42.2 kg)

• Design Load 900 Lbs. (4.00 kN)
when used in pairs
• Safety Factor of 5
• 5/8” (15.9) Max. Flange Thickness
• For use with channel 15/8” (41.3)
in height
• Setscrew included
• Sold in pieces.
• Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 105 Lbs. (47.6 kg)

23/8”
(60.3)

3”
3”

23/8”

(76.2)

(60.3)

(76.2)

1”
(25.4)

33/8”

1”

(85.7)

13/4”
(44.4)
1/4”
(6.3)

5”
(127.0)

(25.4)
1/4”
(6.3)

1/4”
(6.3)

B441Z-22

B441Z-22A

BEAM CLAMP

BEAM CLAMP

• Design Load 1200 Lbs. (5.34 kN)
when used in series
• Safety Factor of 5
• Sold in pieces
• For use with 13/16” (20.6) to 15/8” (41.3)
high channel
• Recommended Torque:
150 in-lbs. (16.9 N•m)
• Standard finishes: ZN
• Wt./C 95 Lbs. (43.1 kg)

• Design Load 1200 Lbs. (5.34 kN)
when used in series
• Safety Factor of 5
• Sold in pieces
• For use with 15/8” (41.3) to 31/4” (82.5)
high channel
• Recommended Torque:
150 in-lbs. (16.9 N•m)
• Standard finishes: ZN
• Wt./C 101 Lbs. (45.8 kg)

1”

1”

(25.4)

(25.4)

3”

3”

(76.2)

(76.2)
1/4”
(6.3)

45/8”
(117.5)

45/8”
(117.5)

1/4”
(6.3)

23/4”
(69.9)

43/8”
(111.1)
Reference page 112 for general fitting and standard finish specifications.

121

37/16”
(87.3)

13/4”
(44.4)

Beam Clamps

B441-22

Beam Clamps

Beam Clamps
B211

B213

ZEE BEAM CLAMP

I-BEAM CLAMP

• Design Load 600 Lbs. (2.67 kN)
when used in pairs
• Safety Factor of 5
• 1” (25.4) Max. Flange Thickness
• 1/2”-13 Setscrew included
• Sold in pieces
• Order 1/2”-13 HHCS and Channel
Nut separately
• Standard finishes: ZN, HDG
• Wt./C 66 Lbs. (29.9 kg)

• Design Load 900 Lbs. (4.00 kN)
when used in pairs
• Safety Factor of 5
• 7/8” (22.2) Max. Flange Thickness
• 1/2”-13 Setscrew included
• Sold in pieces
• Order 1/2”-13 x 21/4” HHCS and
Channel Nut separately
• Material: Malleable iron
• Standard finishes: ZN, GRN
• Wt./C 95 Lbs. (43.1 kg)

11/2”
(38.1)

11/2”
(38.1)

3/8”
(9.5)

31/4”
(82.5)

21/2”
(63.5)

B212-1/4
I-BEAM CLAMP

B355
BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN)
when used in pairs
• Safety Factor of 5
• 5/8” (15.9) Max. Flange Thickness
• Sold in pieces
• Order 1/2”-13 x 11/2” HHCS and
Channel Nut separately
• Standard finishes: ZN, GRN, HDG, SS4
15/8”
• Wt./C 30 Lbs. (13.6 kg)

• Design Load 600 Lbs. (2.67 kN)
when used in pairs
• Safety Factor of 5
• 7/8” (22.2) Max. Flange Thickness
• 3/8”-16 Setscrew included
• Sold in pieces
• Standard finish: ZN
• Wt./C 41 Lbs. (18.6 kg)
7/8” (22.2)

(41.3)

I.D.

1/4” Thick

(6.3)

5/8”
(15.9)

127/32”

2”

(46.8)

(50.8)
1/4”

11/4”

(6.3)

(31.7)

B212-3/8
I-BEAM CLAMP

B435

• Design Load 1000 Lbs. (4.45 kN)
when used in pairs
• Safety Factor of 5
• 11/8” (28.6) Max. Flange Thickness
• 1/2”-13 Setscrew included
• Sold in pieces
• Standard finishes: ZN, HDG
• Wt./C 62 Lbs. (28.1 kg)

• Design Load 900 Lbs. (4.00 kN)
when used in pairs
• Safety Factor of 5
• 21/8” (54.0) Max. Flange Thickness
• 1/2”-13 x 2” Setscrew included
• Sold in pieces
• Standard finish: ZN
• Wt./C 82 Lbs. (37.2 kg)

BEAM CLAMP

11/4”

(31.7)
I.D.

3/8”
(9.5)

3/8” THICK

11/4”
(31.7)

(9.5)

27/8”
(73.0)
2”
(50.8)

2”

11/4”

(50.8)

(31.7)

Reference page 112 for general fitting and standard finish specifications.

122

Beam Clamps
B405

B405A

BEAM CLAMP

SUSPENSION MEMBER

• Design Load 1100 Lbs. (4.89 kN)
when used in pairs
• Safety Factor of 5
• 21/2” (63.5) Max. Flange Thickness
without channel
• 1/2”-13 x 11/2” Setscrew included
• Sold in pieces
• Standard finish: ZN
• Wt./C 92 Lbs. (41.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 75 Lbs. (34.0 kg)

SUSPENSION MEMBER
WITH BEAM CLAMP
• 7/8” (22.2) Max. Flange Thickness
• Includes:
1 pc. B405 Suspension Member
1 pc. B213 I-Beam Clamp
1 pc. 1/2”-13 x 21/2” HHCS
1 pc. 1/2”-13 Hex Nut
• Material: Malleable iron
• Standard finishes: ZN, GRN
• Wt./C 183 Lbs. (83.0 kg)

37/8”
(87.3) O.D.

1/4”
(6.3)

111/16”
(42.9)
I.D.

10°

37/16”
2 Holes
9/16” (14.3)
DIA.

27/8”
(73.0)

2”
3/8”
(9.5)

11/2”
(38.1)

(50.8)

(87.3)

111/16”

17/8”

17/8”

(47.6)
O.D.

(47.6)

B318 THRU B320
BEAM CLAMP ASSEMBLY
• Safety Factor of 5
• 7/8” (22.2) Max. Flange Thickness
• Includes:
1 pc. B333 Slotted U-Support
2 pcs. B213 I-Beam Clamp
2 pcs. 1/2”-13 x 21/2” HHCS
2 pcs. 1/2”-13 Hex Nuts
• Material: Malleable iron
• Standard finishes: ZN, GRN

Part No.
B318
B319
B320

A
71/4”
81/2”
103/8”

(184.1)
(215.9)
(263.5)

1/4”
(6.3)

15/8”
(41.3)
B
A

Design
Lbs.
For Flange Width B
23/8”-41/2” (60.3-114.3) 1200
33/4”-53/4” (95.2-146.0)
800
55/8”-75/8” (142.9-193.7) 560

Load

Wt./C

kN

Lbs.

kg

(5.34)
(3.56)
(2.49)

325
340
357

(147.4)
(154.2)
(161.9)

B602A THRU B602C
BEAM CLAMP WITH GUSSET ASSEMBLY
• Safety Factor of 5
• 7/8” (22.2) Max. Flange Thickness
• Includes:
1 pc. B451 Slotted Three Hole U Support with Gusset
2 pcs. B213 I-Beam Clamp
2 pcs. 1/2”-13 x 21/2” HHCS
2 pcs. 1/2”-13 Hex Nuts
• Material: Malleable iron
• Standard finishes: ZN, GRN

Part No.
B602A
B602B
B602C

A
71/4”
81/2”
103/8”

(184.1)
(215.9)
(263.5)

1/4”
(6.3)

13/4”
(44.4)

B
A

Design
Lbs.
For Flange Width B
23/8”-41/2” (60.3-114.3) 1200
33/4”-53/4” (95.2-146.0) 1200
55/8”-75/8” (142.9-193.7) 1200

Load

Wt./C

kN

Lbs.

kg

(5.34)
(5.34)
(5.34)

365
383
408

(165.1)
(173.7)
(185.0)

Reference page 112 for general fitting and standard finish specifications.

123

(42.9)

Beam Clamps

B427

Beam Clamps
B760-22 SERIES

B760-22A SERIES

Beam Clamps

BEAM CLAMP

BEAM CLAMP

• 1” (25.4) Max. Flange Thickness
• For use with 13/16” (20.6) to 15/8” (41.3)
high channel
• Recommended Torques:
U-Bolt Nuts 150 in-lbs. (16.9 N•m)
J-Hook Nut 60 in-lbs. (6.8 N•m)
33/8”
(85.7)
• Includes:
1 pc. B760 Plate
1 pc. B701 Type J-Hook only
1 pc. B500-33/8” U-Bolt only
3 pcs. 3/8”-16 Hex Nuts
• Standard finish: ZN

• 1” (25.4) Max. Flange Thickness
• For use with 15/8” (41.3) to 31/4” (82.5)
high channel
• Recommended Torques:
5”
U-Bolt Nuts 150 in-lbs. (16.9 N•m) (127.0)
J-Hook Nut 60 in-lbs. (6.8 N•m)
• Includes:
1 pc. B760 Plate
1 pc. B701 Type J-Hook only
1 pc. B500-5” U-Bolt only
3 pcs. 3/8”-16 Hex Nuts
• Standard finish: ZN
1/4”
(6.3)

1/4”
(6.3)

3”

3”

(76.2)

(76.2)

3/8” (9.5) Dia.

3/8” (9.5) Dia.

J-Hook and
Hex Nut

J-Hook and
Hex Nut

Wt./C
Part No.

For Flange Width

B760-22-J4
B760-22-J6
B760-22-J9
B760-22-J12

Lbs.

4”-57/8”

(101.6-149.2)

6”-87/8”
9”-117/8”
12”-147/8”

(152.4-225.4)
(228.6-301.6)
(304.8-377.8)

122
129
135
141

Wt./C
Part No.

kg

For Flange Width
4”-57/8”

B760-22A-J4
B760-22A-J6
6”-87/8”
B760-22A-J9 9”-117/8”
B760-22A-J12 12”-147/8”

(55.3)
(58.5)
(61.2)
(63.9)

(304.8-377.8)

BEAM CLAMP

• 1” (25.4) Max. Flange Thickness
• For use with 13/16” (20.6) to 15/8” (41.3)
high channel
• Recommended Torques:
U-Bolt Nuts 150 in-lbs. (16.9 N•m)
ATR Nuts 60 in-lbs. (6.8 N•m)
• Includes:
2 pcs. B700 Plates
33/8”
2 pcs. B500-33/8” U-Bolts only (85.7)
1 pc. 3/8”-16 ATR (Length)
6 pcs. 3/8”-16 Hex Nuts
• Standard finish: ZN

• 1” (25.4) Max. Flange Thickness
• For use with 15/8” (41.3) to 31/4” (82.5)
high channel
• Recommended Torques:
U-Bolt Nuts 150 in-lbs. (16.9 N•m)
ATR Nuts 60 in-lbs. (6.8 N•m)
• Includes:
2 pcs. B700 Plates
2 pcs. B500-5” U-Bolts only
1 pc. 3/8”-16 ATR (Length)
6 pcs. 3/8”-16 Hex Nuts 1
/4”
• Standard finish: ZN
(6.3)

Part No.

For Flange Width

4”-57/8” (101.6-149.2)
B761-22-4
B761-22-6
6”-87/8” (152.4-225.4)
B761-22-9
9”-117/8” (228.6-301.6)
B761-22-12 12”-147/8” (304.8-377.8)

ATR
Length
4”
6”
9”
12”

Wt./C
Lbs. kg

Part No.

(101.6) 202 (91.6)

B761-22A-4
B761-22A-6
B761-22A-9
B761-22A-12

(152.4) 206 (93.4)
(228.6) 214 (97.0)
(304.8) 221 (100.2)

For Flange Width
4”-57/8”
6”-87/8”
9”-117/8”
12”-147/8”

(67.1)

3/8”-16 (9.5) ATR

and Hex Nuts

ATR
Length

Wt./C
Lbs. kg

(101.6-149.2) 4”

(101.6) 216 (98.0)

(152.4-225.4) 6”

(152.4) 220 (99.8)

(228.6-301.6) 9”

(228.6) 228 (103.4)

(304.8-377.8) 12” (304.8) 235 (106.6)

Reference page 112 for general fitting and standard finish specifications.

124

(64.4)

5”

(76.2)

and Hex Nuts

(61.7)

(127.0)

3”

3/8”-16 (9.5) ATR

(58.5)

(228.6-301.6)

B761-22A SERIES

3”

129
136
142
148

(152.4-225.4)

BEAM CLAMP

(76.2)

kg

(101.6-149.2)

B761-22 SERIES

1/4”
(6.3)

Lbs.

Beam Clamps
B614

COLUMN SUPPORT FOR B22

B613A

COLUMN SUPPORT FOR B22

COLUMN SUPPORT FOR B52

• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B22 and B24 Channel
• Setscrews to be torqued to 19 ft./Lbs
• Sold in pairs
• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B52 and B54 Channel
• Setscrews to be torqued to 19 ft./Lbs
• Sold in pairs
• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)

15/8”
(41.3)

15/8”
(41.3)

31/2”
(88.9)

31/2”
(88.9)

3/8” x 2” Cone

3/8” x 2” Cone

Point
Setscrews

Point
Setscrews

B422 SERIES
RIGHT ANGLE CLAMP
• Safety Factor of 5
• Material: 7 Gauge (4.5)
• Standard finishes: ZN, SS4

Part No.
B422-1/2
B422-3/4
B422-1
B422-11/4
B422-11/2
B422-2
B422-21/2
B422-3
B422-31/2
B422-4

Design Load
Vertical Pull

Conduit
Size
1/2”
3/4”

A
23/8”
23/8”
27/8”
27/8”
31/4”
311/16”
41/4”
47/8”
57/16”
6”

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)

1”
11/4”
11/2”
2
21/2”
3”
31/2”
4”

Lbs.
(60.3)
(60.3)
(73.0)
(73.0)
(82.5)
(93.7)
(107.9)
(123.8)
(138.1)
(152.4)

250
300
400
400
500
600
700
800
900
1000

kg
(1.11)
(1.33)
(1.78)
(1.78)
(2.22)
(2.67)
(3.11)
(3.56)
(4.00)
(4.45)

A

Wt./C
Lbs.

38
39
48
50
59
75
98
111
123
135

kg
(17.2)
(17.7)
(21.8)
(22.7)
(26.7)
(34.0)
(44.4)
(50.3)
(55.8)
(61.2)

U-Bolt and Hex Nuts
Design Load
Vertical Pull

B107S

B593

U-SUPPORT

CLEVIS SWIVEL

• Material: 7 Gauge (4.5)
• Standard finishes: ZN, GRN
• Wt./C 51 Lbs. (23.1 kg)

• Includes:
1 pc. 3/8”-16 x 2” HHCS
1 pc. 3/8”-16 Hex Nut
• Material: 11 Gauge (3.0)
• Standard finishes: ZN, GRN
• Wt./C 31 Lbs. (14.0 kg)

33/4”
(95.2)
1”
(25.4)

13/8”
(34.9)

17/16”
(36.5)

7/16” (11.1) Dia.

13/4”

O.D.
(44.4)

4 Holes
9/16” (14.3) Dia.

• Illustration shows B107S and
B593 used together
• Design Load 900 Lbs.,
strength of assembly only
• Verify anchorage

21/2”
(63.5)
11/4”
(31.7)

Reference page 112 for general fitting and standard finish specifications.

125

9/16” (14.3) Dia.

Beam Clamps

• Quick installation (one bolt to tighten)
• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B22 and B24 Channel
• Sold in pairs
• Standard finish: ZN
• Wt./C 50 Lbs. (22.6 kg)

B613

Pipe/Conduit Clamps & Hangers
Cooper B-Line’s beam attachments and pipe
supports offered in this section are designed to
provide supports without drilling or welding. A
complete selection of beam clamps, pipe clamps,
rollers, supports and accessories are designed for
use with Cooper B-Line channels and offer many
installation advantages.

Materials & Finishes*

Pipe/Conduit Clamps &
Hangers

Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel
strips, plates or rod unless noted.
Finish
Code
PLN

Finish
Plain

ZN

Electro-Plated Zinc

GRN
DCU
HDG
YZN
SS4
SS6
AL

Dura-Green
Dura-Copper
Hot-Dipped Galvanized
Yellow Zinc Chromate
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum

Specification
ASTM A1011
33,000 PSI min. yield
ASTM B633 SC3 Type III
or ASTM A653

ASTM A123
ASTM B633 SC3 Type II
ASTM A240
ASTM A240
ASTM B209

*Unless otherwise noted.

Load Data
The load data published includes a safety factor
of 5.0 unless noted (safety factor = ratio of
ultimate load to the design load).

Recommended Torque For Setscrews
(unless noted)
Setscrew Size
Foot/Lbs.
Nm

1/4”-20

3/8”-16

1/2”-13

4
5

5
7

11
15

Setscrew Size
Foot/Lbs.
Nm

5/8”-11

3/4”-10

21
28

34
46

*See chart on page 72 for bolt torque.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

126

Pipe Clamps
B2207 THRU B2213
MULTI-GRIP PIPE CLAMPS FOR THINWALL
(EMT), I.M.C., RIGID CONDUIT OR PIPE
•
•
•
•
•

Design Load 1

Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Includes Combination Recess Hex Head Machine Screw and Square Nut
Material: ASTM A1011 33,000 PSI min. yield
Standard finish: ZN

Design Load 3
Design Load 2

Nominal
Size

Material
Thickness

B2207

38
/ ” (10)

16 Ga. (1.5)

B2208

1/2” (15)

16 Ga. (1.5)

B2209

3/4” (20)

14 Ga. (1.9) .917-1.081 (23.2-27.4) B2002, B2009,

400

(1.78)

50

(.22)

50

(.22)

12

(5.4)

(25) 14 Ga. (1.9) 1.125-1.375 (28.6-34.9) B2003, B2010,

400

(1.78)

50

(.22)

50

(.22)

13

(5.9)

B2211

11/4” (32) 14 Ga. (1.9) 1.500-1.691 (38.1-42.9) B2004, B2011,
B2033, B2034

400

(1.78)

50

(.22)

50

(.22)

15

(6.8)

B2212

11/2” (40) 12 Ga. (2.6) 1.735-1.931 (44.0-49.0) B2005, B2012,
B2035
B2006,
B2013
2” (50) 12 Ga. (2.6) 2.192-2.400 (55.7-60.9)
B2039

600

(2.67)

75

(.33)

75

(.33)

23

(10.4)

600

(2.67)

75

(.33)

75

(.33)

26

(11.8)

B2210

B2213

1”

O.D. Size
Range

Alternate For Design Load 1 Design Load 2 Design Load 3
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
Clamp No.’s
B2000,
B2001,
(1.78)
(4.1)
.557-.706 (14.2-17.9)
50
(.22)
50
(.22)
9
400
B2026
(1.78)
(5.0)
.701-.875 (17.8-22.2) B2001, B2008, 400
50
(.22)
50
(.22)
11
B2027, B2028

B2030, B2031,

BPC-8 THRU BPC-64
BREAK-APART CONDUIT CLAMP
•
•
•
•

Design Load 200 Lbs. (.896 kN)
Includes Combination Recess Hex Head Machine Screw
Material: ASTM A1011 33,000 PSI min. yield
Standard finish: ZN

Part No.
BPC-8
BPC-12
BPC-16
BPC-20
BPC-24
BPC-32
BPC-40
BPC-48
BPC-56
BPC-64

A
Rigid or EMT
Conduit Size
1/2”
(21.3)
3/4”
(26.7)
1”
(33.4)
11/4”
(42.2)
11/2”
(48.3)
2”
(60.3)
21/2”
(73.0)
3”
(88.9)
31/2”
(101.6)
4”
(114.3)

Wt./C
Lbs.

11.2
12.7
14.5
16.5
18.5
21.5
21.5
22.0
23.0
27.5

kg
(5.1)
(5.8)
(6.6)
(7.5)
(8.4)
(9.8)
(9.8)
(10.0)
(10.4)
(12.5)

A

Design Load

Reference page 126 for general fitting and standard finish specifications.

127

Pipe/Conduit Clamps &
Hangers

Part No.

Pipe Clamps
B2000 SERIES
PIPE AND CONDUIT CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Includes Combination Recess Hex Head Machine Screw and Square Nut
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finishes: ZN, HDG, SS4, SS6, AL

Design Load 1

Note: For EMT sizes 21/2” and larger use rigid conduit sizes.

Design Load 2
Design Load 3

Pipe/Conduit Clamps &
Hangers

THINWALL CONDUIT (EMT) CLAMPS
Part No.
B2000
B2001
B2002
B2003
B2004
B2005
B2006

Conduit
Size
3/8”

(10)

1/2”

(15)

3/4”

(20)

1”
11/4”
11/2”
2”

(25)
(32)
(40)
(50)

Material
Thickness
16
16
16
14
14
12
12

Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.

(1.5)
(1.5)
(1.9)
(1.9)
(1.9)
(2.6)
(2.6)

Design Load 1 Design Load 2 Design Load 3

Wt./C

Lbs.

kN

Lbs.

kg

Lbs.

kg

Lbs.

kg

400
400
400
600
600
800
800

(1.78)

50
50
50
75
75
125
125

(.22)

50
50
50
75
75
125
125

(.22)

10
10
11
16
19
28
33

(4.5)

(1.78)
(1.78)
(2.67)
(2.67)
(3.56)
(3.56)

(.22)
(.22)
(.33)
(.33)
(.56)
(.56)

(.22)
(.22)
(.33)
(.33)
(.56)
(.56)

(4.5)
(5.0)
(7.2)
(8.6)
(12.7)
(14.9)

RIGID CONDUIT OR PIPE CLAMPS
Part No.
B2001
B2008
B2009
B2010
B2011
B2012
B2013
B2014
B2015
B2016
B2017
B2018
B2019
B2020
B2021
B2022
B2130
B2132

Conduit
Size
3/8”

(10)

1/2”

(15)

3/4”

(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
41/2”
5”
6”
7”
8”
10
12”

(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(115)
(125)
(150)
(175)
(200)
(254)
(305)

Material
Thickness
16 Ga.
16 Ga.
14 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
12 Ga.
12 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.

(1.5)
(1.5)
(1.9)
(1.9)
(1.9)
(2.6)
(2.6)
(2.6)
(2.6)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)

Design Load 1 Design Load 2 Design Load 3

Wt./C

Lbs.

kN

Lbs.

kg

Lbs.

kg

Lbs.

kg

400
400
600
600
600
800
800
800
800
1000
1000
1000
1000
1000
1000
1000
1000
1000

(1.78)

50
50
75
75
75
125
125
125
125
200
200
200
200
200
250
250
250
250

(.22)

50
50
75
75
75
125
125
125
125
150
150
150
150
150
200
200
200
200

(.22)

10
11
15
16
20
30
34
38
44
61
66
70
77
100
115
128
160
185

(4.5)

(1.78)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)

(4.45)
(4.45)

(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.56)
(.89)
(.89)
(.89)
(.89)
(.89)
(1.11)
(1.11)
(1.11)
(1.11)

(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.56)
(.67)
(.67)
(.67)
(.67)
(.67)
(.89)
(.89)
(.89)
(.89)

(5.0)
(6.8)
(7.2)
(9.1)
(13.6)
(15.4)
(17.2)
(19.9)
(27.6)
(29.9)
(31.7)
(34.9)
(45.3)
(52.1)
(58.0)
(72.6)
(83.9)

Reference page 126 for general fitting and standard finish specifications.

128

Pipe Clamps
B2000 SERIES

Design Load 1

PVC CLAMPS
•
•
•
•

Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Includes Combination Recess Hex Head Machine Screw and Square Nut
Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finishes: PVC

CLAMP SIZING CHART FOR PVC COATED
RIGID CONDUIT AND CLAMPS

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)

.020 (.51mm)

0

.020 (.51mm)

B2002
B2030
B2010
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115

B2002
B2030
B2010
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115

B2009
B2003
B2004
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115

CLAMP SIZING CHART FOR PVC COATED
THINWALL (EMT) CONDUIT AND CLAMPS
Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating

Nominal
Conduit
Size
3/8”
1/2”
3/4”

1”
11/4”
11/2”
2”

(10)
(15)
(20)
(25)
(32)
(40)
(50)

0

.020 (.51mm)

0

.020 (.51mm)

B2026
B2027
B2009
B2003
B2004
B2005
B2039

B2026
B2027
B2009
B2031
B2011
B2005
B2039

B2026
B2027
B2009
B2031
B2011
B2005
B2039

B2001
B2008
B2009
B2031
B2011
B2012
B2013

*See B2000 O.D. pipe and conduit clamp chart on pgs.
130-131 for corresponding clamp load data.

*See B2000 O.D. pipe and conduit clamp chart on pgs.
130-131 for corresponding clamp load data.

B2000 SERIES

Design Load 1

COPPER TUBING CLAMPS
•
•
•
•

Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Includes Combination Recess Hex Head Machine Screw and Square Nut
Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finish: Exclusive Dura-Copper™ Finish (DCU)
Design Load 2
Design Load 3

COPPER TUBING CLAMPS
Part
No.

Tubing
Size

B2024DCU
B2025DCU
B2026DCU
B2027DCU
B2008DCU
B2030DCU
B2010DCU
B2011DCU
B2038DCU
B2042DCU
B2046DCU
B2050DCU
B2054DCU
B2062DCU
B2110DCU
B2126DCU

1/4”
3/8”
1/2”
5/8”
3/4”

1”
11/4”
11/2”
2
21/2”
3
31/2”
4
5
6
8

O.D. Size
In.

(mm)

.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125

(9.5)
(12.7)
(15.9)
(19.0)
(22.2)
(28.6)
(34.9)
(41.3)
(54.0)
(66.7)
(79.4)
(92.1)
(104.8)
(130.2)
(155.6)
(206.4)

Material Design Load 1 Design Load 2 Design Load 3
kN
Lbs.
kg
Lbs.
kg
Thickness Lbs.

Lbs.

kg

16 Ga.
16 Ga.
16 Ga.
16 Ga.
16 Ga.
14 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
12 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.

8
9
10
10
11
15
17
19
32
35
39
54
61
70
94
123

(3.6)

(1.5)
(1.5)
(1.5)
(1.5)
(1.5)
(1.9)
(1.9)
(1.9)
(2.6)
(2.6)
(2.6)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)

400
400
400
400
400
600
600
600
800
800
800
1000
1000
1000
1000
1000

(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)

50
50
50
50
50
75
75
75
125
125
125
200
200
200
250
250

(.22)
(.22)
(.22)
(.22)
(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.89)
(.89)
(.89)
(1.11)
(1.11)

50
50
50
50
50
75
75
75
125
125
125
150
150
150
200
200

(.22)
(.22)
(.22)
(.22)
(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.67)
(.67)
(.67)
(.89)
(.89)

Reference page 126 for general fitting and standard finish specifications.

129

Wt./C

(4.1)
(4.5)
(4.5)
(5.0)
(6.8)
(7.7)
(8.6)
(14.5)
(15.9)
(17.7)
(24.5)
(27.6)
(31.7)
(42.6)
(55.8)

Pipe/Conduit Clamps &
Hangers

0
B2008
B2030
B2032
B2005
B2012
B2013
B2014
B2015
B2016
B2017
B2019
B2020

Size
3/4”

Design Load 3

Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating

Nominal
Conduit
1/2”

Design Load 2

Pipe Clamps
B2000 SERIES

Design Load 1

O.D. PIPE AND CONDUIT CLAMPS
•
•
•
•

Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Other sizes available upon request
Includes Combination Recess Hex Head Machine Screw
and Square Nut.
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6)
ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0)
ASTM A1011HSLA Gr. 50
• Standard finishes: ZN, HDG, SS4

O.D.
O.D.

Design Load 2
Design Load 3

O.D. CLAMPS

Pipe/Conduit Clamps &
Hangers

Part
No.

O.D.
Size (in.)

Hardware
Size

Material
Design Load 1 Design Load 2 Design Load 3
Gauge Thickness Lbs.
kN
Lbs.
kN
Lbs.
kN

Wt./C
Lbs.

kg

B2023

1/4”

(6.3)

1/4”-20

16

(1.5)

120

(.54)

30

(.13)

30

(.13)

8

(3.6)

B2024

3/8”

(9.5)

1/4”-20

16

(1.5)

300

(1.33)

40

(.18)

40

(.18)

8

(3.6)

B2025

1/2”

(12.7)

1/4”-20

16

(1.5)

400

(1.78)

50

(.22)

50

(.22)

9

(4.1)

B2026

5/8”

(15.9)

1/4”-20

16

(1.5)

400

(1.78)

50

(.22)

50

(.22)

10

(4.5)

B2027

3/4”

(19.0)

1/4”-20

16

(1.5)

400

(1.78)

50

(.22)

50

(.22)

10

(4.5)

B2008

7/8”

(22.2)

1/4”-20

16

(1.5)

400

(1.78)

50

(.22)

50

(.22)

11

(5.0)

B2009

1”

(25.4)

1/4”-20

14

(1.9)

500

(2.22)

75

(.33)

75

(.33)

15

(6.8)

B2030

11/8”

(28.6)

1/4”-20

14

(1.9)

600

(2.67)

75

(.33)

75

(.33)

15

(6.8)

B2031

11/4”

(31.7)

1/4”-20

14

(1.9)

600

(2.67)

75

(.33)

75

(.33)

16

(7.3)

B2010

13/8”

(34.9)

1/4”-20

14

(1.9)

600

(2.67)

75

(.33)

75

(.33)

17

(7.7)

B2004

11/2”

(38.1)

1/4”-20

14

(1.9)

600

(2.67)

75

(.33)

75

(.33)

18

(8.2)

B2011

15/8”

(41.3)

1/4”-20

14

(1.9)

600

(2.67)

75

(.33)

75

(.33)

19

(8.6)

B2005

13/4”

(44.4)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

29

(13.1)

B2012

17/8”

(47.6)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

30

(13.6)

B2037

2

(50.8)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

30

(13.6)

B2038

21/8”

(54.0)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

32

(14.5)

B2039

21/4”

(57.1)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

32

(14.5)

B2013

23/8”

(60.3)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

34

(15.4)

B2041

21/2”

(63.5)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

35

(15.9)

B2042

25/8”

(66.7)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

35

(15.9)

B2043

23/4”

(69.8)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

38

(17.2)

B2014

27/8”

(73.0)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

38

(17.2)

B2045

3

(76.2)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

38

(17.2)

B2046

31/8”

(79.4)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

39

(17.7)

B2047

31/4”

(82.5)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

41

(18.6)

B2048

33/8”

(85.7)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

43

(19.5)

B2015

31/2”

(88.9)

5/16”-18

12

(2.6)

800

(3.56)

125

(.56)

125

(.56)

44

(20.0)

B2050

35/8”

(92.1)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

54

(24.5)

B2051

33/4”

(95.2)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

57

(25.8)

B2052

37/8”

(41.3)

5/16”-18

11

(3.0)

1000

(4.45

200

(.89)

150

(.67)

55

(25.0)

B2016

4

(101.6)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

57

(25.8)

B2054

41/8”

(104.8)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

61

(27.7)

B2055

41/4”

(107.9)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

62

(28.1)

B2056

43/8”

(111.1)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

64

(29.0)

B2017

41/2”

(114.3)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

66

(29.9)

B2058

45/8”

(117.5)

5/16”-18

11

(3.0)

1000

(4.45)

200

(.89)

150

(.67)

66

(29.9)

Reference page 126 for general fitting and standard finish specifications.

130

Pipe Clamps
B2000 SERIES
O.D. PIPE AND CONDUIT CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Other sizes available upon request
• Includes Combination Recess Hex Head Machine Screw and Square Nut.
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
Design Load 1
•Standard finishes: ZN, HDG, SS4
O.D.

O.D.

Design Load 2
Design Load 3

Part
No.
B2059
B2060
B2018
B2062
B2063
B2064
B2019
B2066
B2067
B2068
B2069
B2110
B2111
B2112
B2113
B2020
B2115
B2116
B2117
B2118
B2119
B2120
B2121
B2021
B2123
B2124
B2125
B2126
B2127
B2128
B2129
B2022
B2130
B2132

O.D.
Size (in.)

Hardware
Size

43/4”

(120.6)

5/16”-18

47/8”
5
1
5 /8”
51/4”
53/8”
51/2”
55/8”
53/4”
57/8”
6”
1
6 /8”
61/4”
63/8”
61/2”
65/8”
63/4”
67/8”
7”
1
7 /8”
71/4”
73/8”
71/2”
75/8”
73/4”
77/8”
8”
81/8”
81/4”
83/8”
81/2”
85/8”
103/4”
123/4”

(123.8)

5/16”-18

(127.0)

5/16”-18

(130.2)

5/16”-18

(133.3)

5/16”-18

(136.5)

5/16”-18

(139.7)

5/16”-18

(142.9)

5/16”-18

(146.0)

5/16”-18

(149.2)

5/16”-18

(152.4)

5/16”-18

(155.6)

3/8”-16

(158.7)

3/8”-16

(161.9)

3/8”-16

(165.1)

3/8”-16

(168.3)

3/8”-16

(171.4)

3/8”-16

(174.6)

3/8”-16

(177.8)

3/8”-16

(181.0)

3/8”-16

(184.1)

3/8”-16

(187.3)

3/8”-16

(190.5)

3/8”-16

(193.7)
(196.8)

3/8”-16

(200.0)

3/8”-16

(203.2)

3/8”-16

(206.4)

3/8”-16

(209.5)

3/8”-16

(212.7)

3/8”-16

(215.9)

3/8”-16

(219.1)

3/8”-16

(273.0)

3/8”-16

(323.8)

3/8”-16

3/8”-16

Material
Design Load 1 Design Load 2 Design Load 3
Gauge Thickness Lbs.
kN
Lbs.
kN
Lbs.
kN
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11

(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)

1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000

(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)

200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)

150
150
150
150
150
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200

Reference page 126 for general fitting and standard finish specifications.

131

(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)

Wt./C
Lbs.

kg

68
69
70
70
70
77
78
83
84
85
87
94
96
98
99
100
102
104
106
108
110
112
114
115
117
119
121
123
125
126
128
128
160
185

(30.8)
(31.3)
(31.8)
(31.8)
(31.8)
(34.9)
(35.4)
(37.6)
(38.1)
(38.6)
(39.5)
(42.6)
(43.5)
(44.4)
(44.9)
(45.4)
(46.3)
(47.2)
(48.1)
(49.0)
(49.9)
(50.8)
(51.7)
(52.2)
(53.1)
(54.0)
(54.9)
(55.8)
(56.7)
(57.2)
(58.1)
(58.1)
(72.6)
(83.9)

Pipe/Conduit Clamps &
Hangers

O.D. CLAMPS

Pipe Clamps
B1508 THRU B1564S

Design Load

CONDUIT/STRUT CLAMPS
• Safety Factor of 3
• Clamps without saddles are not recommended
for flexible conduit or cable
• All Sizes Include:
1/4”-20 Slotted Hex Head Machine Screw
• Standard finish: ZN

Setscrew

Pipe/Conduit Clamps &
Hangers

Thickness

B1508S THRU B1524S
B1508 THRU B1520
B1532S THRU B1564S

Part No.
B1508
B1512
B1516
B1520
B1508S
B1512S
B1516S
B1520S
B1524S
B1532S
B1534S
B1540S
B1548S
B1556S
B1564S

EMT

Use With
Rigid Conduit

1/2”

(15)

–

–

3/4”

(20)

1/2”

(15)

1”
11/4”
1/2”
3/4”
1”
1
1 /4”
11/2”
2”
–
21/2”
3”
31/2”
4”

(25)

3/4”

(20)

(32)

1”
–
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”

(25)

(15)
(20)
(25)
(32)
(40)
(50)

–
(65)
(80)
(90)
(100)

–
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)

Design Load
Thickness
16
16
14
14
16
16
14
14
12
12
12
12
12
12
12

Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.

(1.5)
(1.5)
(1.9)
(1.9)
(1.5)
(1.5)
(1.9)
(1.9)
(2.6)
(2.6)
(2.6)
(2.6)
(2.6)
(2.6)
(2.6)

Lbs.

200
200
300
300
200
200
300
300
400
400
400
400
400
400
400

Wt./C

kN

Lbs.

kg

(.89)

7.4
8.0
11.0
12.5
8.6
9.2
12.7
14.6
20.5
21.5
22.7
26.0
30.2
33.3
36.6

(3.4)

(.89)
(1.33)
(1.33)
(.89)
(.89)
(1.33)
(1.33)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)

Reference page 126 for general fitting and standard finish specifications.

132

(3.6)
(5.0)
(5.7)
(3.9)
(4.2)
(5.8)
(6.6)
(9.3)
(9.8)
(10.3)
(11.9)
(13.7)
(15.1)
(16.6)

Pipe Clamps
B2601 THRU B2610
TWIST EAR® PIPE CLAMP
• One piece break apart, screw retainer, thread impressions
• Tighter alignment, no need to leave additional space between
clamps in order to access nut and bolt
• Easier access bolt can be tightened directly from front
• Available in 1/2”, 3/4”, 1” rigid and EMT Conduit
• Recommended Torque 30 in. - lbs.
• Safety Factor of 3
• Standard finish: ZN

Design Load
B-Line
B26093/4
3/4" ST
D

B-Line
B26093/4
3/4" ST
D
B-Line
B26093/4
3/4"
STD

B-Line
B26093/4
3/4" ST
D

Part No.
B2601
B2602
B2603
B2608
B2609
B2610

EMT

Use With
Rigid Conduit

1/2”

(17.9)

3/4”

(23.4)

1”
–
–
–

(29.5)

–
–
–
1/2”
3/4”
1”

–
–
–

–
–
–
(21.3)
(26.7)
(33.4)

Break-apart - break in the
middle, bolt the ends together.

Design Load
Thickness
16
14
14
16
14
14

Lbs.

Ga.
Ga.
Ga.
Ga.
Ga.
Ga.

300
500
500
300
500
500

Wt./C

kN

Lbs.

kg

(1.34)

8.2
13.5
15.6
8.2
13.5
15.6

(3.7)

(2.24)
(2.24)
(1.34)
(2.24)
(2.24)

BP081SS THRU BP475SS

No loose pieces. One piece
break apart with screw
retainer and thread impressions.

(6.1)
(7.1)
(3.7)
(6.1)
(7.1)

Design Load

P CLAMPS
• Minimizes induction heating
• Material: Stainless Steel Type 304

Setscrew

W
O.D. Size

H
14 Gauge

O.D. Size
Part No.
BP081SS
BP110SS
BP135SS
BP175SS
BP205SS
BP250SS
BP300SS
BP325SS
BP375SS
BP425SS
BP475SS

In.

mm

.250-.840 (6.4-21.3)
.810-1.100 (20.6-28.0)
.850-1.350 (21.6-34.8)
1.250-1.750 (31.8-44.4)
1.550-2.050 (39.4-52.1)
2.00-2.50 (50.8-63.5)
2.55-3.00 (64.7-76.2)
2.75-3.25 (69.9-82.8)
3.25-3.75 (82.6-95.3)
3.75-4.25 (95.3-108.0)
4.25-4.75 (108.0-120.7)

Height H

Width W

Design Load

Wt/C.

In.

mm

In.

mm

Lbs.

kN

Lbs.

kg

1.86
2.18
2.25
2.78
3.00
3.43
3.87
4.06
4.60
5.13
5.70

(47.2)
(55.4)
(57.2)
(70.6)
(76.2)
(87.1)
(97.8)
(103.1)
(116.8)
(130.3)
(5.70)

0.87
1.19
1.38
1.78
2.28
2.83
3.15
3.28
3.83
4.50
4.85

(22.1)
(30.2)
(35.1)
(45.2)
(57.9)
(71.9)
(80.0)
(83.3)
(97.3)
(114.3)
(123.2)

300
300
300
300
300
300
300
300
300
300
300

(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)

9.0
12.0
14.0
21.0
30.0
35.0
39.0
41.0
47.0
54.0
58.0

(4.1)
(5.4)
(6.3)
(9.5)
(13.6)
(15.9)
(17.7)
(18.6)
(21.3)
(24.4)
(26.3)

Reference page 126 for general fitting and standard finish specifications.

133

Pipe/Conduit Clamps &
Hangers

Allows for multiple clamps to be used in succession,
with easier access than other pipe clamps.

VibraClamp™ Pipe Clamps
Design Load 1

BVT SERIES VIBRACLAMPS-COPPER & O.D.
• Safety Factor of 3
• Accesses tubing sizes 1/8” (3) to 6” (150)
• Allows easy one tool installation
• Endures both high (+300°F) and low (-40°F) temperatures
• Dampens vibration and noise
• Eliminates galvanic metal to metal contact
• Resists most industrial oils and solvents
• Reduces thermal loss and gain
• Secures tubing firmly to channel (strut)
• Dielectric strength of 400 volts/mil
• Includes cushion, clamp, screw and nut
• Standard finishes: YZN, SS4

Pipe/Conduit Clamps &
Hangers

Catalog
Number
BVT025
BVT037
BVT050
BVT062
BVT075
BVT087
BVT100
BVT112
BVT125
BVT137
BVT150
BVT162
BVT175
BVT187
BVT200
BVT212
BVT225
BVT250
BVT262
BVT300
BVT312
BVT362
BVT412
BVT612
Catalog
Number

Tubing
O.D. Size
1/4”
3/8”
1/2”
5/8”
3/4”
7/8”

1”
11/8”
11/4”
13/8”
11/2”
15/8”
13/4”
17/8”
2”
21/8”
21/4”
21/2”
25/8”
3”
31/8”
35/8”
41/8”
61/8”

Design Load
1
Lbs.

BVT025
BVT037
BVT050
BVT062
BVT075
BVT087
BVT100
BVT112
BVT125
BVT137
BVT150
BVT162
BVT175
BVT187
BVT200
BVT212
BVT225
BVT250
BVT262
BVT300
BVT312
BVT362
BVT412
BVT612

(6.3)
(9.5)
(12.7)
(15.9)
(19.0)
(22.2)
(25.4)
(28.6)
(31.7)
(34.9)
(38.1)
(41.3)
(44.4)
(47.6)
(50.8)
(54.0)
(57.1)
(63.5)
(66.6)
(76.2)
(79.4)
(92.1)
(104.8)
(155.5)

400
400
400
400
600
600
600
600
600
600
600
800
800
800
800
800
800
800
800
800
800
1000
1000
1000

kN
(1.78)
(1.78)
(1.78)
(1.78)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)

Copper
Tubing Size
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”

–
1”
–
11/4”
–
11/2”
–
–
–
2”
–
–
21/2”
–
3”
31/2”
4”
6”

(3)
(6)
(10)
(15)
(17)
(20)

–
(25)

–
(32)

–
(40)

–
–
–
(50)

–
–
(65)

–
(80)
(90)
(100)
(150)

Design
Load 2

A
B
C
Dimensions
B

A
1.22
1.36
1.49
1.62
1.87
2.00
2.25
2.25
2.51
2.51
2.74
3.00
3.13
3.28
3.52
3.52
3.64
3.91
4.02
4.42
4.53
5.05
5.55
7.62

(30.9)
(34.5)
(37.8)
(41.1)
(47.4)
(50.8)
(57.1)
(57.1)
(63.7)
(63.7)
(69.6)
(76.2)
(79.5)
(83.3)
(89.4)
(89.4)
(92.4)
(99.3)
(102.1)
(112.2)
(115.0)
(128.2)
(140.9)
(193.5)

Design Load
2

Design Load
3

Lbs.

Lbs.

50
50
50
50
75
75
75
75
75
75
75
125
125
125
125
125
125
125
125
125
125
200
200
200

kN
(0.22)
(0.22)
(0.22)
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.89)
(0.89)
(0.89)

50
50
50
50
75
75
75
75
75
75
75
125
125
125
125
125
125
125
125
125
125
150
150
150

Design
Load 3

kN
(0.22)
(0.22)
(0.22)
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.67)
(0.67)
(0.67)

134

0.19
0.25
0.31
0.38
0.50
0.56
0.69
0.69
0.81
0.81
0.88
1.00
1.06
1.13
1.25
1.25
1.31
1.43
1.50
1.68
1.75
2.00
2.25
3.25

(4.8)
(6.3)
(7.8)
(9.6)
(12.7)
(14.2)
(17.5)
(17.5)
(20.6)
(20.6)
(22.4)
(25.4)
(26.9)
(28.7)
(31.7)
(31.7)
(33.2)
(36.3)
(38.1)
(42.6)
(44.4)
(50.8)
(57.1)
(82.5)

Wt./C
C

Lbs.

kg

0.49 (12.4)
0.61 (15.5)
0.74 (18.8)
0.86 (21.8)
1.15 (29.2)
1.27 (32.2)
1.52 (38.6)
1.52 (38.6)
1.78 (45.2)
1.78 (45.2)
1.96 (49.8)
2.20 (55.9)
2.33 (59.1)
2.46 (62.5)
2.70 (68.6)
2.70 (68.6)
2.83 (71.8)
3.11 (79.0)
3.20 (81.3)
3.61 (91.6)
3.70 (93.9)
4.23 (107.4)
4.73 (120.1)
6.74 (171.1)

11
12
14
15
19
21
22
26
36
38
35
40
44
40
55
55
54
56
55
67
64
76
93
136

(5.0)
(5.4)
(6.3)
(6.8)
(8.6)
(9.5)
(10.0)
(11.8)
(16.3)
(17.2)
(15.9)
(18.1)
(19.9)
(18.1)
(25.0)
(25.0)
(24.5)
(25.4)
(25.0)
(30.4)
(29.0)
(34.5)
(42.2)
(61.6)

Reference page 126 for general fitting and
standard finish specifications.

VibraClamp™ Pipe Clamps
BVP SERIES
VIBRACLAMPS-IRON PIPE & RIGID CONDUIT
• Safety Factor of 3
• Accesses pipe sizes 1/4” (6) to 6” (150)
• Allows easy one tool installation
• Endures both high (+300°F) and low (-40°F) temperatures
• Dampens vibration and noise
• Eliminates galvanic metal to metal contact
• Resists most industrial oils and solvents
• Reduces thermal loss and gain
• Secures pipe firmly to channel (strut)
• Dielectric strength of 400 volts/mil
• Includes cushion, clamp, screw and nut
• Standard finishes: YZN, SS4

Design Load 1

Design
Load 2

A
Design
Load 3

B
C

Catalog
Number

Nominal
Pipe Size
1/4”
(6.3)
3/8”
(9.5)
1/2”
(12.7)
3/4”
(19.0)
1”
(25.4)
11/4”
(31.7)
11/2”
(38.1)
2”
(50.8)
21/2”
(63.5)
3”
(76.2)
31/2”
(88.9)
4”
(101.6)
5”
(127.0)
6”
(152.4)

Steel
O.D. Size
0.540
(13.7)
0.675
(17.1)
0.875
(22.2)
1.050
(26.7)
1.312
(33.3)
1.660
(42.2)
1.900
(48.3)
2.375
(60.3)
2.875
(73.0)
3.500
(88.9)
4.000
(101.6)
4.500
(114.3)
5.563
(141.3)
6.625
(168.3)

Design Load
1

Design Load
2

Lbs.

BVP025
BVP037
BVP050
BVP075
BVP100
BVP125
BVP150
BVP200
BVP250
BVP300
BVP350
BVP400
BVP500
BVP600

400
600
600
600
600
800
800
800
800
1000
1000
1000
1000
1000

kN
(1.78)
(2.67)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)

Lbs.

50
75
75
75
75
125
125
125
125
200
200
200
200
200

kN
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.89)
(0.89)
(0.89)
(0.89)
(0.89)

A
1.61
1.86
1.99
2.25
2.51
3.00
3.21
3.77
4.28
5.05
5.55
6.05
6.84
8.24

(39.9)
(47.2)
(50.5)
(57.1)
(63.8)
(76.2)
(83.1)
(95.8)
(108.7)
(128.3)
(140.9)
(153.7)
(173.7)
(209.3)

Dimensions
B
0.37
(9.4)
0.50 (12.7)
0.56 (14.2)
0.69 (17.5)
0.81 (20.6)
1.00 (25.4)
1.12 (28.4)
1.37 (34.8)
1.62 (41.1)
2.00 (50.8)
2.25 (57.1)
2.50 (63.5)
3.00 (76.2)
3.56 (90.4)

C
0.87
1.15
1.27
1.52
1.77
2.21
2.41
2.96
3.46
4.24
4.74
5.24
6.24
7.36

(22.1)
(29.2)
(32.3)
(38.6)
(45.0)
(56.1)
(62.3)
(75.2)
(87.9)
(107.7)
(120.3)
(133.1)
(158.4)
(186.9)

Design Load
3
Lbs.

50
75
75
75
75
125
125
125
125
150
150
150
150
150

kN
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.67)
(0.67)
(0.67)
(0.67)
(0.67)

Reference page 126 for general fitting and standard finish specifications.

135

Wt./C
Lbs.

kg

15
18
20
21
20
36
40
45
54
81
87
109
136
163

(6.8)
(8.2)
(9.1)
(9.5)
(9.1)
(16.3)
(18.1)
(20.4)
(24.5)
(36.7)
(39.4)
(49.4)
(61.6)
(73.8)

Pipe/Conduit Clamps &
Hangers

Catalog
Number
BVP025
BVP037
BVP050
BVP075
BVP100
BVP125
BVP150
BVP200
BVP250
BVP300
BVP350
BVP400
BVP500
BVP600

Armafix™ Clamps & Accessories
IPH SERIES

Pipe/Conduit Clamps &
Hangers

INSERTS - INSERTS WITH CLAMPS
• Engineered load-bearing inserts prevents insulation compression
1/2” Wall Insulation Thickness
• Innovative insulated pipe support
• Desirable “Foam-to-Foam” Bond
Assembly Insert Only
Pipe/Copper/OD Hanger
• Slip Data: 45 lbs. (0.20 kN) max
Part No.
Size
Size*
Part No.
• Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm)
3
/8” O.D.
11/4”
IPH03812 IPH03812WO
• Service Temperature Range
1/2” O.D.
IPH01212
IPH01212WO
11/4”
-58°F (-50°C) to +220°F (+105°C)
5/8” O.D.
IPH05812 IPH05812WO
11/2”
3/4” O.D.
IPH03412 IPH03412WO
11/2”
7/8” O.D.
IPH07812 IPH07812WO
2”
2”
IPH11812 IPH11812WO 3/4” IPS & 11/8” O.D.
IPH13812 IPH13812WO
13/8” O.D.
21/2”
5
IPH15812 IPH15812WO
1 /8” O.D.
21/2”
1
7
IPH11012 IPH11012WO 1 /2” IPS & 1 /8” O.D.
3”
IPH21812 IPH21812WO
21/8” O.D.
3”
5
1
IPH25812
IPH25812WO
2
/
8
”
O.D.
3
/2”
Insert Only
Assembly
Insert & Clamp
4”
IPH31812 IPH31812WO
31/8” O.D.
IPH35812 IPH35812WO
35/8” O.D.
5”
IPH41812 IPH41812WO
41/8” O.D.
6”
3/4” Wall Insulation Thickness
IPH40012 IPH40012WO
4” IPS
6”
IPH50012
IPH50012WO
5”
IPS
8”
Assembly Insert Only
Pipe/Copper/OD Hanger
IPH60012 IPH60012WO
6” IPS
8”
Part No.
Part No.
Size
Size*
IPH03834
IPH01234
IPH05834
IPH03434
IPH07834
IPH11834
IPH13834
IPH15834
IPH11034
IPH21834
IPH25834
IPH31834
IPH35834
IPH41834
IPH40034
IPH50034
IPH60034
IPH80034

3/8” O.D.
IPH03834WO
1/2” O.D.
IPH01234WO
5/8” O.D.
IPH05834WO
3/4” O.D.
IPH03434WO
7/8” O.D.
IPH07834WO
3
IPH11834WO /4” IPS & 11/8” O.D.
IPH13834WO
13/8” O.D.
IPH15834WO
15/8” O.D.
IPH11034WO 11/2” IPS & 17/8” O.D.
IPH21834WO
21/8” O.D.
IPH25834WO
25/8” O.D.
IPH31834WO
31/8” O.D.
IPH35834WO
35/8” O.D.
IPH41834WO
41/8” O.D.
IPH40034WO
4” IPS
IPH50034WO
5” IPS
IPH60034WO
6” IPS
IPH80034WO
8” IPS

* Recommended pipe hanger size for insulation thickness
shown. (Order hanger separately)

2”
2”
2”
2”
21/2”
21/2”
3”
31/2”
31/2”
4”
5”
5”
6”
6”
6”
8”
10”
12”

1” Wall Insulation Thickness
Assembly
Part No.
IPH05810
IPH03410
IPH07810
IPH11810
IPH13810
IPH15810
IPH11010
IPH21810
IPH25810
IPH31810
IPH35810
IPH41810
IPH40010
IPH50010
IPH60010
IPH80010

* Recommended pipe hanger size for insulation thickness
shown. (Order hanger separately)

IPH18230
ARMAFLEX® INSUALTION TAPE
• 30 ft. (9.14 M) roll

Insert Only
Pipe/Copper/OD Hanger
Part No.
Size
Size*
5/8” O.D.
21/2”
IPH05810WO
3
IPH03410WO
/4” O.D.
21/2”
7
IPH07810WO
/8” O.D.
3”
IPH11810WO 3/4” IPS & 11/8” O.D.
3”
IPH13810WO
13/8” O.D.
31/2”
IPH15810WO
15/8” O.D.
31/2”
IPH11010WO 11/2” IPS & 17/8” O.D.
4”
IPH21810WO
21/8” O.D.
4”
IPH25810WO
5”
25/8” O.D.
IPH31810WO
31/8” O.D.
5”
IPH35810WO
6”
35/8” O.D.
IPH41810WO
41/8” O.D.
6”
IPH40010WO
4” IPS
8”
IPH50010WO
8”
5” IPS
IPH60010WO
6” IPS
10”
IPH80010WO
8” IPS
12”

* Recommended pipe hanger size for insulation thickness
shown. (Order hanger separately)

Armaflex® is a registared trademark of Armacell.

Reference page 126 for general fitting and standard finish specifications.

136

Vibra Cushion™ Accessories
B1999

FEATURES

VIBRA CUSHION™

Vibra Cushion™ is designed for use
with refrigeration lines, HVAC,
copper tubing, glass pipe and
hydraulic lines. It provides an
energy-absorption barrier between
the lines and the mounting material
and remains flexible thru its entire
service range of -75°F (-60°C) to
+375°F (+199°C).

•
•
•
•
•

Packaged 20 Ft. (6.09 m) per carton
Ideal Isolation Material
Inhibits Galvanic Corrosion
Dampens Sound and Vibrations
Service Temperature Range
-75°F (-60°C) to +375°F (+199°C)
• Wt./Carton 3.8 Lbs. (1.7 kg)

This elastomer allows for expansion
and contraction within the mounting
system and prevents galvanic
reaction between dissimilar metals.

FOR RIGID CONDUIT
OR IRON PIPE
Nominal
Size
3/8” (10)
1/2” (15)
3/4” (20)
1” (25)
11/4” (32)
11/2” (40)
2” (50)
21/2” (65)
3” (80)
31/2” (90)
4” (100)
5” (125)
6” (150)

15/8”
(41.3)

Length of
Use
Vibra-Cushion Clamp No.
21/8” (54.0) B2002
25/8” (66.7) B2009
31/4” (82.5) B2031
41/8” (104.8) B2004
53/16” (131.8) B2012
515/16” (150.8) B2038
71/2” (190.5) B2042
9” (228.6) B2046
11” (279.4) B2051
121/2” (317.5) B2055
141/2” (368.3) B2059
177/16” (442.9) B2067
203/4” (527.0) B2116

FOR THINWALL (EMT)
CONDUIT
Nominal
Size
3/8” (10)
1/2” (15)
3/4” (20)

1”
11/4”
11/2”
2”

(25)
(32)
(40)
(50)

Length of
Use
Vibra-Cushion Clamp No.
113/16” (46.0)
213/16” (58.7)
27/8”
(73.0)
35/8”
(92.1)
43/8” (120.6)
57/16” (138.1)
67/8” (174.6)

B2027
B2002
B2003
B2032
B2036
B2012
B2013

•
•
•
•
•

Non-adhesive rubber tape
Fuses to itself
Water resistant
Ideal Isolation Material
Prevents galvanic reaction caused by
dissimilar metal contact
• Temperature Range
-140°F (-60°C) to +395°F (+200°C)

• Fits securely in 15/8” wide channel
• Temperature range: -20°F to 212°F
• Ideal Isolation & Vibration Dampening
Qualities
• 45 durometer hardness
• Material: Neoprene

1”
(25.4)

ISO

Thickness

Length of
Use
Vibra-Cushion Clamp No.
13/16” (30.2) B2026
19/16” (39.7) B2027
17/8”
(47.6) B2008
25/16” (58.7) B2029
23/4”
(69.8) B2030
31/2”
(88.9) B2032
45/16” (109.5) B2011
51/8” (130.2) B2036
611/16” (169.9) B2013
81/4” (209.5) B2014
913/16” (249.2) B2048
113/8” (288.9) B2052
1215/16” (328.6) B2056
161/8” (409.6) B2064
191/4” (488.9) B2112
251/2” (647.7) B2128

BVS Type - Vibra Strip™ for 15/8" (41.3) wide
B-Line channel

ISO PIPE

Part No.

Nominal
Size
1/4”
(6)
3/8”
(10)
1/2”
(15)
5/8”
(17)
3/4”
(20)
1”
(25)
11/4” (32)
11/2” (40)
2”
(50)
21/2” (65)
3”
(80)
31/2” (90)
4” (100)
5” (125)
6” (150)
8” (200)

Ft./Roll

In.

mm

Ft.

m

Part No.

.020

(0.5)

36

(11)

BVS-12
BVS-120

Max. Load
Lbs. per
Lineal In.
Lbs. kg/25.4 mm
40
40

(18.1)
(18.1)

Length
12” (304.8)
120” (3048.0)

Reference page 126 for general fitting and standard finish specifications.

137

Wt.
Each
Std.
Pkg. Lbs. kg
25
25

.46 (.21)
4.60 (2.08)

Pipe/Conduit Clamps &
Hangers

FOR COPPER TUBING
TYPE L & K

Pipe Clamps
Design Load
1

B2400 SERIES
STANDARD PIPE STRAP

Pipe Size

•
•
•
•
•

Safety Factor of 5
B2400-3/4 thru B2400-8 are UL listed
Order hardware separately
Other sizes available upon request
Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield;
2” - 12”, ASTM A1018 33,000 PSI min. yield;
Design Load
14”-Larger, ASTM A36
3
• Standard finish: ZN
• Ductile Iron Sizes Available
• Meets requirements of MSS SP-58 & SP-69 Type 26

Pipe/Conduit Clamps &
Hangers

Part No.
B2400-1/2
B2400-3/4
B2400-1
B2400-11/4
B2400-11/2
B2400-2
B2400-21/2
B2400-3
B2400-31/2
B2400-4
B2400-5
B2400-6
B2400-8
B2400-10
B2400-12
B2400-14
B2400-16
B2400-18
B2400-20
B2400-24
Part No.

B2400-1/2
B2400-3/4
B2400-1
B2400-11/4
B2400-11/2
B2400-2
B2400-21/2
B2400-3
B2400-31/2
B2400-4
B2400-5
B2400-6
B2400-8
B2400-10
B2400-12
B2400-14
B2400-16
B2400-18
B2400-20
B2400-24

Pipe Size
1/2”

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
(350)
(400)
(460)
(510)
(610)

3/4”

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
24”

A
5/16”
5/16”
5/16”
5/16”
5/16”
7/16”
7/16”
7/16”
7/16”
9/16”
9/16”
9/16”
9/16”
9/16”
9/16”
15/16”
15/16”
15/16”
15/16”
15/16”

Design Load
1

B
(7.9)
(7.9)
(7.9)
(7.9)
(7.9)
(11.1)
(11.1)
(11.1)
(11.1)
(14.3)
(14.3)
(14.3)
(14.3)
(14.3)
(14.3)
(23.8)
(23.8)
(23.8)
(23.8)
(23.8)

7/16”
7/16”
7/16”
7/16”
7/16”
11/16”
11/16”
11/16”
11/16”
11/16”
11/16”
11/16”
11/16”
11/16”
11/16”

11/2”
11/2”
13/4”
13/4”
13/4”

Hole Size

A

B
W

C
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(38.1)
(38.1)
(44.4)
(44.4)
(44.4)

213/16”
3”
317/32”
33/4”
41/16”
521/32”
65/32”
625/32”
79/32”
725/32”
87/8”
915/16”
1131/32”
14”
16”
203/4”
223/4”
27”
29”
33”

Design Load
2

T
(71.4)
(76.2)
(89.7)
(95.2)
(103.2)
(143.6)
(156.3)
(172.2)
(184.9)
(197.6)
(225.4)
(252.4)
(304.0)
(355.6)
(406.4)
(527.0)
(577.8)
(685.8)
(736.6)
(838.2)

10
10
10
10
10

Ga.
Ga.
Ga.
Ga.
Ga.
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”

Design Load
3

Design Load
2

W
(3.4)
(3.4)
(3.4)
(3.4)
(3.4)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(9.5)
(9.5)
(12.7)
(12.7)
(12.7)

15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
15/8”
13/4”
13/4”
13/4”
13/4”
13/4”

(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(44.4)
(44.4)
(44.4)
(44.4)
(44.4)

Wt./C

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

600
600
600
600
600
1200
1200
1200
1200
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000

(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(5.34)
(5.34)
(5.34)
(5.34)
(6.67)
(6.67)
(6.67)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)

150
150
150
150
150
480
480
480
480
600
600
600
800
800
800
800
800
800
800
800

(.67)
(.67)
(.67)
(.67)
(.67)
(2.14)
(2.14)
(2.14)
(2.14)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)

105
105
120
120
120
180
180
300
300
450
450
450
600
600
600
600
600
600
600
600

(.47)
(.47)
(.53)
(.53)
(.53)
(.80)
(.80)
(1.33)
(1.33)
(2.00)
(2.00)
(2.00)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)

23
26
31
36
39
93
106
132
151
160
192
219
297
465
560
761
861
1297
1426
1682

kg
(10.4)
(11.8)
(14.0)
(16.3)
(17.7)
(42.2)
(48.1)
(59.9)
(68.5)
(72.6)
(87.1)
(99.3)
(134.7)
(210.9)
(254.0)
(345.2)
(390.5)
(588.3)
(646.8)
(762.9)

Reference page 126 for general fitting and standard finish specifications.

138

T

C

Pipe Clamps
B437 SERIES TWO PIECE PIPE STRAP
• Clamp halves can turn allowing pipe to
be fastened to channel at any direction
• Order hardware separately
• Standard finish: ZN
Wt./C
Part No.

1/2”

(15)

3/4”

(20)

1”

(25)

11/4”

(32)

11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”

(40)

A

T

5

/16”
/16”
5
/16”
5
/16”
5
/16”
7
/16”
7
/16”
7
/16”
7
/16”
9
/16”
9
/16”
9
/16”
9
/16”

(7.9)

5

(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)

(7.9)
(7.9)
(7.9)
(7.9)

10
10
10
10
10

(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)

Ga.
Ga.
Ga.
Ga.
Ga.
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”

(3.4)
(3.4)
(3.4)
(3.4)
(3.4)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)

Lbs.

kg

22
26
30
35
38
91
104
130
149
158
190
217
295

(10.0)

T

(11.8)
(13.6)
(15.9)

Hole Size

(17.2)

A

(41.3)
(47.2)
(58.9)
(67.6)
(71.6)
(86.2)
(98.4)
(133.8)

B2417 STRUT MOUNTED PIPE GUIDE

14 Gauge
(1.9)

• Copper tubing sizes available - B2417CT Series
• Standard finish: ZN

Part No.
B2417-1/2
B2417-3/4
B2417-1
B2417-11/4
B2417-11/2
B2417-2
B2417-21/2
B2417-3
B2417-31/2
B2417-4

Minimum
Includes
Radial Clearance Clamp No.

Pipe Size
1

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"
31/2"
4"
3

(15)

1

(1.6)

(20)

1

(1.6)

/16"
/16"
3
/32"
3
/32"
3
/32"
1
/8"
1
/8"
5
/32"
5
/32"
5
/32"

(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)

(2.3)
(2.3)
(2.3)
(3.2)
(3.2)
(3.9)
(3.9)
(3.9)

Pipe/Conduit Clamps &
Hangers

B437-1/2
B437-3/4
B437-1
B437-11/4
B437-11/2
B437-2
B437-21/2
B437-3
B437-31/2
B437-4
B437-5
B437-6
B437-8

Pipe Size

B2009
B2010
B2034
B2037
B2039
B2043
B2047
B2016
B2017
B2018

Wt./C
Lbs.

kg

22
25
30
47
51
62
69
108
118
128

(10.0)
(11.3)
(13.6)
(21.8)
(23.1)
(28.1)
(31.3)

Clearance

(49.0)
(53.5)
(58.0)

B2070 THRU B2080
PARALLEL PIPE CLAMP
• Safety Factor of 2
• Designed to support pipe or rigid conduit
• Includes:
1 pr. Pipe Clamps
1 pc. Stand Off Plate
1 pc. Slotted Hex Head
Machine Screws
Pipe
1 pc. Square Nut
Size
• Standard finish: ZN
A dimension, from bottom
of channel to center of pipe.

A

Design Load

Part No.
B2070
B2071
B2072
B2073
B2074
B2075
B2076
B2077
B2078
B2079
B2080

Pipe Size
3/8” (10)
1/2” (15)
3/4” (20)
1” (25)
11/4” (32)
11/2” (40)
2” (50)
21/2” (65)
3” (80)
31/2” (90)
4” (100)

A
111/16”
13/4”
17/8”
2”
23/16”
25/16”
29/16”
27/8”
33/16”
37/16”
35/8”

(42.9)
(44.4)
(47.6)
(50.8)
(55.6)
(58.7)
(65.1)
(73.0)
(80.9)
(87.3)
(92.1)

Material Design Load
Thickness Lbs. kN
16 Ga. (1.5) 300 (1.33)
16 Ga. (1.5) 300 (1.33)
14 Ga. (1.9) 300 (1.33)
14 Ga. (1.9) 400 (1.78)
14 Ga. (1.9) 400 (1.78)
12 Ga. (2.6) 500 (2.22)
12 Ga. (2.6) 500 (2.22)
12 Ga. (2.6) 500 (2.22)
12 Ga. (2.6) 500 (2.22)
11 Ga. (3.0) 500 (2.22)
11 Ga. (3.0) 500 (2.22)

Reference page 126 for general fitting and standard finish specifications.

139

Wt./C
Lbs.

kg

24
26
30
33
36
50
55
60
66
85
95

(10.9)
(11.8)
(13.6)
(14.9)
(16.3)
(22.7)
(24.9)
(27.2)
(29.9)
(38.5)
(43.1)

Pipe Clamps
B670 SERIES

B671 SERIES

PARALLEL PIPE CLAMP

EDGE PIPE CLAMP

• Designed to support pipe or rigid
conduit parallel to the edge of a
beam or angle iron
• Hardware included
• Material: Malleable Iron
• Standard finish: HDG

• Designed to support pipe or rigid
conduit perpendicular to the edge of
a beam or angle iron
• Hardware included
• Material: Malleable Iron
• Standard finish: HDG

Pipe/Conduit Clamps &
Hangers

Part
Number

Pipe or Conduit
Wt./C
Size
Lbs.
kg

B670-3/8
B670-1/2
B670-3/4
B670-1
B670-11/4
B670-11/2
B670-2
B670-21/2
B670-3
B670-31/2
B670-4

3/8”

32
58
64
70
77
93
105
143
164
190
205

(10)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)

1/2”
3/4”

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”

(14.5)
(26.3)
(29.0)
(31.7)
(34.9)
(42.2)
(47.6)
(64.8)
(74.4)
(86.2)
(93.0)

Part
Number

Pipe or Conduit
Wt./C
Size
Lbs.
kg

B671-1/2
B671-3/4
B671-1
B671-11/4
B671-11/2
B671-2
B671-21/2
B671-3

1/2”

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)

3/4”

1”
11/4”
11/2”
2”
21/2”
3”

67
71
85
91
115
135
183
230

(30.4)
(32.2)
(38.5)
(41.3)
(52.1)
(61.2)
(83.0)
(104.3)

B422 SERIES RIGHT ANGLE CLAMP
• Safety Factor of 5
• Material: 7 Gauge (4.5)
• Standard finishes: ZN, SS4

Part No.
B422-1/2
B422-3/4
B422-1
B422-11/4
B422-11/2
B422-2
B422-21/2
B422-3
B422-31/2
B422-4

Design Load
Vertical Pull

Conduit
Size
1/2”
3/4”

1”
11/4”
11/2”
2
21/2”
3”
31/2”
4”

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)

A
23/8”
23/8”
27/8”
27/8”
31/4”
311/16”
41/4”
47/8”
57/16”

(60.3)
(60.3)
(73.0)
(73.0)
(82.5)
(93.7)
(107.9)
(123.8)
(138.1)
(152.4)

6”

Lbs.

kg

Lbs.

kg

250
300
400
400
500
600
700
800
900
1000

(1.11)
(1.33)
(1.78)
(1.78)
(2.22)
(2.67)
(3.11)
(3.56)
(4.00)
(4.45)

38
39
48
50
59
75
98
111
123
135

(17.2)
(17.7)
(21.8)
(22.7)
(26.7)
(34.0)
(44.4)
(50.3)
(55.8)
(61.2)

3/8”
(9.5)

B3367S

RETAINING STRAP

x 1/2”

A

Wt./C

B3367S-1

U-Bolt and
Hex Nuts
Design Load
Vertical Pull

13 Gauge
(2.3)

(12.7)

Slots

• Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6),
10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2)
• Material: Steel
• Standard finishes: ZN, PLN

L
21/4”
(57.1)

Part No.
B3367S-1-L
B3367S-2-L

Hole Dia.
D
7/16” (30.1)
9/16” (30.1)

Wt./C**

For Use
With
B422-1/2

Lbs.
3/4

&
B422-1, 11/4 & 11/2

kg

33.4 (5.8)
12.8 (15.1)

** Wt./C based on 6” (152.4) length. For each additional inch
3/4”
in strap length add the following to the Wt./C.
For B3367S-1 add 5.7 Lbs (2.6 kg)
(19.0)
For B3367S-2 add 2.2 Lbs (1.0 kg)
Note: Use B3367-3/8 retaining strap (page 102) for B422-2 thru 4

B3367S-2
12 Gauge

3/8” Dia.
(19.0)

(2.6)

L

Reference page 126 for general fitting and standard finish specifications.

140

Pipe Clamps
B2301 SERIES
ONE HOLE EMT STRAP

Hole Dia.

• Standard finish: ZN

W
T
Part
No.

T

1/2”

(15)

3/4”

(20)

1”
1
1 /4”
11/2”
2”

(25)

.050
.050
.050
.065
.090
.090

(32)
(40)
(50)

Hole
Dia.

W

Wt./C

(1.3)

3/4”

(19.0)

9/32”

(7.1)

(1.3)

7/8”

(22.2)

9/32”

(7.1)

(1.3)

1”
1
1 /4”
1”
11/4”

(25.4)

9/32”

(7.1)

(31.7)

9/32”

(7.1)

(25.4)

11/32”

(8.7)

(31.7)

13/32”

(10.3)

(1.6)
(2.3)
(2.3)

Lbs.

kg

2.4
4.2
8.3
11.0
14.8
21.6

(1.1)
(1.9)
(3.7)
(5.0)

Pipe/Conduit Clamps &
Hangers

B2301-1/2
B2301-3/4
B2301-1
B2301-11/4
B2301-11/2
B2301-2

Conduit
Size

(6.7)
(9.8)

B2302 SERIES
ONE HOLE RIGID CONDUIT/PIPE STRAP
• Standard finish: ZN
Part
No.

Conduit/Pipe
Size

B2302-1/4

1/4”

(6)

B2302-3/8
B2302-1/2
B2302-3/4
B2302-1
B2302-11/4
B2302-11/2
B2302-2
B2302-21/2
B2302-3
B2302-31/2
B2302-4

3/8”

(10)

1/2”

(15)

3/4”

(20)

1”
(25)
11/4” (32)
11/2” (40)
2”
(50)
21/2” (65)
3”
(80)
31/2” (90)
4” (100)

T
.045
.050
.050
.050
.065
.065
11 Ga.
11 Ga.
7 Ga.
7 Ga.
1/4”
1/4”

Hole
Dia.

W
(1.1)

5/8”

(1.3)

3/4”

(1.3)

Wt./C
Lbs.

(15.9)

13/64”

(5.1)

(19.0)

9/32”

(7.1)

7/8”

(22.2)

9/32”

(7.1)

(1.3)

7/8”

(22.2)

9/32”

(7.1)

(1.6)

1”
11/4”
1”
1
1 /4”
11/4”
11/4”
11/4”
11/4”

(25.4)

9/32”

(7.1)

(31.7)

21/64”

(8.3)

(25.4)

.380
.389
.665
.650
.622
.630

(9.6)

(1.6)
(3.0)
(3.0)
(4.5)
(4.5)
(6.3)
(6.3)

(31.7)
(31.7)
(31.7)
(31.7)
(31.7)

(9.9)
(16.9)
(16.5)
(15.8)
(16.0)

1.4
2.4
3.3
3.8
7.2
11.0
19.2
28.8
55.2
68.0
96.0
108.0

kg
(.6)
(1.1)

Hole Dia.

(1.5)
(1.7)
(3.2)
(5.0)

W

(8.7)

T

(13.0)
(25.0)
(30.8)
(43.5)
(49.0)

B2084 THRU B2091
ONE HOLE O.D. TUBING CLAMP
• Material: 14 Gauge (1.9) ASTM A1011 33,000 PSI min. yield
• Standard finish: ZN

9/32” (7.1)
Dia.

Wt./C
Part No.
B2084
B2085
B2086
B2087
B2088
B2089
B2090
B2091

O.D. Size

A

1/4”

(6.3)

7/8”

(22.2)

5/16”

(7.9)

29/32”

(23.0)

(9.5)

31/32”

(24.6)

1/2”

(12.7)

11/16”

(25.9)

5/8”

(15.9)
(19.0)

7/8”

(22.2)

1”

(25.4)

13/32”
15/32”
17/32”
19/32”

(27.8)

3/4”

3/8”

(29.1)
(30.7)
(32.2)

Lbs.

kg

4.0
4.2
5.2
5.8
7.1
7.7
8.7
10.0

(1.8)
(1.9)
(2.3)

3/8”
(9.5)

15/8”
(41.3)

A

(2.6)
(3.2)
(3.5)
(3.9)
(4.5)

Reference page 126 for general fitting and standard finish specifications.

141

O.D.
Size

Pipe Clamps
Design Load

BL1400 SERIES
CONDUIT HANGER
•
•
•
•

Safety Factor of 3
Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit
Hardware included
Standard finishes: ZN, SS4

W

Conduit Size

A
T
Hole Size B

Part No

Conduit
Size

Design Load
A

B

Pipe/Conduit Clamps &
Hangers

1/2”
29/32” (23.0)
BL1400
(15)
3
31/32” (24.6)
BL1410
/4”
(20)
BL1420
1”
(25)
11/4” (31.7)
1
BL1425
1 /4” EMT
(32)
11/4” (31.7)
1
1
BL1430 1 /4” R,1 /2” EMT (32) 113/32” (35.7)
BL1440
11/2” R
(40)
15/8” (41.3)
BL1450
2”
(50) 21/16” (47.6)
BL1460
21/2”
(65) 21/16” (52.4)
BL1470
3”
(80)
21/2” (63.5)
1
BL1480
3 /2”
(90)
23/4” (69.8)
BL1490
4”
(100) 31/2” (88.9)

T

W

Lbs.

9/32”

(7.1) 16 Ga. (1.5)

3/4”

(19.0)

9/32”

(7.1) 16 Ga. (1.5)

3/4”

(19.0)

9/32”

(7.1) 16 Ga. (1.5)

3/4”

(19.0)

9/32”

(7.1) 18 Ga. (1.2)

7/8”

(22.2)

9/32”

(8.7) 18 Ga. (1.2)

7/8”

(22.2)

1”
11/4”
11/4”
11/4”
11/4”
11/4”

(25.4)

11/32” (8.7)
11/32” (8.7)
11/32” (8.7)
11/32” (8.7)
11/32” (8.7)
11/32” (8.7)

B3373 SERIES

16
16
16
16
16
16

Ga.
Ga.
Ga.
Ga.
Ga.
Ga.

(1.5)
(1.5)
(1.5)
(1.5)
(1.5)
(1.5)

(31.7)
(31.7)
(31.7)
(31.7)
(31.7)

590
590
590
590
590
755
755
755
820
850
1410

Lbs.

kg

(2.62)

6
7
8
10
10
17
25
26
33
36
40

(2.7)

(2.62)
(2.62)
(2.62)
(2.62)
(3.36)
(3.36)
(3.36)
(3.65)
(3.78)
(6.27)

Pipe Size

RISER CLAMP
•
•
•
•

Safety Factor of 3.5
B3373-3/4 thru B3373-8 are UL listed
Includes Hex Head Cap Screws and Hex Nuts
Standard finishes: ZN, PLN

T
W

Part No.

Pipe
Size

A

Design Load
A

B3373-1/2

1/2”

(15)

B3373-3/4
B3373-1
B3373-11/4
B3373-11/2
B3373-2
B3373-21/2
B3373-3
B3373-31/2
B3373-4
B3373-5
B3373-6
B3373-8

3/4”

(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”

(25)
(32)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(100)
(100)

9”
91/4”
99/16”
10”
101/4”
103/4”
111/4”
1115/16”
123/8”
127/8”
14”
153/16”
173/4”

(228.6)
(234.9)
(242.9)
(254.0)
(260.3)
(273.0)
(285.7)
(303.2)
(314.3)

(327.0)
(355.6)
(385.8)
(450.8)

Wt./C

Lbs.

kN

Lbs.

kg

255
255
255
255
255
255
390
530
670
810
1160
1570
2500

(1.13)

101
105
109
112
113
165
180
195
217
228
480
526
957

(45.9)

(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.73)
(2.36)
(2.98)
(3.60)
(5.16)
(6.98)
(11.12)

Reference page 126 for general fitting and standard finish specifications.

142

Wt./C

kN

(47.7)
(49.4)
(50.9)
(51.1)
(75.0)
(81.6)
(88.4)
(98.5)
(103.5)
(217.7)
(238.6)
(434.1)

(3.2)
(3.6)
(4.5)
(4.5)
(7.7)
(11.3)
(11.8)
(14.9)
(16.3)
(18.1)

Pipe Hangers
B3690 SERIES
ADJUSTABLE J HANGER
• Safety Factor of 5
• Material:
12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield
11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1
7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and
1/4” (6.3) ASTM A1018 33,000 PSI min. yield
• Standard finish: ZN

A
DIA.

‘D’

C

Rod Take-Out

B

‘E’ Diameter. Is
For Wall Mounting

TxW

Felt Line
B3690F-SIZE

Design Load

Design Load

Part No.
B3690-1/2
B3690-3/4
B3690-1
B3690-11/4
B3690-11/2
B3690-2
B3690-21/2
B3690-3
B3690-31/2
B3690-4
B3690-5
B3690-6
B3690-8

Pipe or
Conduit Size

A

B

1/2”

(15)

13/32”

(10.3)

3/4”

(20)

13/32”

(10.3)

(25)

13/32”

(32)

13/32”

(40)

13/32”

(50)

13/32”

(10.3)

(65)

9/16”

(14.3)

(80)

9/16”

(14.3)

(90)

9/16”

(14.3)

(100)

11/16”

(17.5)

(125)

11/16”

(150)

13/16”

(200)

13/16”

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”

(10.3)
(10.3)
(10.3)

(17.5)
(20.6)
(20.6)

23/32”
211/32”
219/32”
213/16”
31/16”
31/2”
47/16”
47/8”
53/16”
61/8”
63/4”
73/4”
91/4”

C
(53.2)
(59.5)
(65.9)
(71.4)
(77.8)
(88.9)
(112.7)
(123.8)
(131.8)
(155.6)
(171.4)
(196.8)
(235.0)

1”
1”
1”
1”
1”
1”
1”
1”
1”
11/4”
11/2”
13/16”
1”

D

E

F

(25.4) 111/16” (42.5) 13/32”

(10.3) 1/4”-20 x 21/4”

(25.4) 113/16” (46.2) 13/32”

(10.3) 1/4”-20 x 21/2”

115/16” (49.2)

13/32”

(10.3) 1/4”-20 x 23/4”

(50.4)

13/32”

(10.3) 1/4”-20 x 3”
(10.3) 1/4”-20 x 31/4”

(25.4)
(25.4)

2”

(25.4)

21/8”

(53.7)

13/32”

(25.4)

25/16”

(58.7)

13/32”

(10.3) 1/4”-20 x 31/2”

(25.4)

3”
31/8”
33/16”
37/8”
4”
47/16”
415/16”

(76.2)

9/16”

(14.3) 3/8”-16 x 41/2”

(79.4)

9/16”

(14.3) 3/8”-16 x 5”

(81.0)

9/16”

(14.3) 3/8”-16 x 51/2”

(98.4)

9/16”

(14.3) 3/8”-16 x 61/2”

(100.8)

9/16”

(14.3) 3/8”-16 x 71/2”

(112.7)

9/16”

(14.3) 3/8”-16 x 81/2”

(125.4)

9/16”

(14.3) 3/8”-16 x 101/2”

(25.4)
(25.4)
(31.8)
(38.1)
(30.2)
(25.4)

Wt./C

Design Load
Part No.
B3690-1/2
B3690-3/4
B3690-1
B3690-11/4
B3690-11/2
B3690-2
B3690-21/2
B3690-3
B3690-31/2
B3690-4
B3690-5
B3690-6
B3690-8

Pipe/Conduit Clamps &
Hangers

Bolt Size ‘F’ And Hex
Nut Included

T
12 Ga.
12 Ga.
12 Ga.
12 Ga.
12 Ga.
12 Ga.
11 Ga.
11 Ga.
11 Ga.
7 Ga.
7 Ga.
1/4”
1/4”

W
(2.6)

3/4”

(19.0)

(2.6)

3/4”

(19.0)

(2.6)

3/4”

(19.0)

(2.6)

3/4”

(19.0)

(2.6)

3/4”

(19.0)

(2.6)

3/4”

(19.0)

(3.0)

11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/2”

(31.7)

(3.0)
(3.0)
(4.5)
(4.5)
(6.3)
(6.3)

(31.7)
(31.7)
(31.7)
(31.7)
(31.7)
(38.1)

Lbs.

kN

Lbs.

kg

400
400
400
400
400
400
800
800
800
800
800
1000
1200

(1.78)

20
23
24
27
29
32
71
77
84
139
166
226
332

(9.1)

(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(5.34)

Reference page 126 for general fitting and standard finish specifications.

143

(10.4)
(10.9)
(12.2)
(13.1)
(14.5)
(32.2)
(34.9)
(38.1)
(63.0)
(75.3)
(102.5)
(150.6)

Pipe Hangers
B386 SERIES

A Dia.

SUSPENSION ROD PIPE STRAP

T

• Safety Factor of 3
• Includes Hex Head Cap Screws and Hex Nuts
• Standard finishes: ZN, GRN

C
W
B
Design Load

Wt./C

Pipe/Conduit Clamps &
Hangers

Design Load
Part No.

Pipe Size

B386-3/4

3/4”

(20)

7/16”

1”
11/4”
11/2”
2”
1
2 /2”
3”
31/2”
4”
5”
6”
8”

(25)

7/16”

(11.1) 35/16”
(11.1) 33/4”

(32)

7/16”

(11.1)

(40)

7/16”

(11.1)

(50)

7/16”

(11.1)

(65)

9/16” (14.3)
9/16” (14.3)

B386-1
B386-11/4
B386-11/2
B386-2
B386-21/2
B386-3
B386-31/2
B386-4
B386-5
B386-6
B386-8

A

(80)
(90)
(100)

B

4”
45/16”
51/2”
63/8”
7”
79/16”
85/8”
93/4”
115/8”
137/8”

9/16” (14.3)
9/16” (14.3)

(125) 11/16” (17.4)
(150) 11/16” (17.4)
(200) 13/16” (20.6)

C
23/16”

(95.2) 25/16”

T

W

(55.6)

1/8”

(3.2)

(58.7)

1/8”

(3.2)

(101.6) 217/32” (64.3)

1/8”

(3.2)

(109.5) 211/16” (68.3)

1/8”

(3.2)

(139.7) 35/16”

(84.1)

1/4”

(6.3)

31/2”

(88.9)

1/4”

(6.3)

(177.8) 37/8”

(98.4)

1/4”

(6.3)

(192.1) 41/8” (104.8)

1/4”

(6.3)

(219.1) 43/8” (111.1)

1/4”

(6.3)

(247.6) 53/16” (131.8)

1/4”

(6.3)

(295.3) 61/16” (154.0)

3/8”

(9.5)

(352.4) 71/8” (181.0)

3/8”

(9.5)

(84.1)

(161.9)

1”
1”
1”
1”
1”
1”
1”
1”
11/4”
11/4”
11/2”
11/2”

(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(31.7)
(31.7)
(38.1)
(38.1)

B394 SERIES

Lbs.

kN

Lbs.

kg

730
730
730
730
730
1350
1350
1350
1350
2160
2160
3230

(3.25)

46
51
52
54
134
157
168
197
270
308
609
713

(20.8)

(3.25)
(3.25)
(3.25)
(3.25)
(6.00)
(6.00)
(6.00)
(6.00)
(9.61)
(9.61)
(14.37)

(23.1)
(23.6)
(24.5)
(60.8)
(71.2)
(76.2)
(89.3)
(122.4)
(139.7)
(276.4)
(323.4)

‘B’ Dia.

PIPE STRAP
• Safety Factor of 3
• Includes:
1 Pair Pipe Clamps with Hex Head Cap Screws and Hex Nuts
1 Hanger Strap
• Standard finishes: ZN

‘T’
Clamp
Only

A

Pipe Size

‘W’
Clamp
Only
Design Load

Design Load
Part No.
B394-3/4
B394-1
B394-11/4
B394-11/2
B394-2
B394-21/2
B394-3
B394-31/2
B394-4
B394-5
B394-6
B394-8

Pipe
3/4”
1”
1
1 /4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”

(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)

B

A

Size
35/16”
33/4”
4”
45/16”
51/2”
63/8”
7”
79/16”
85/8”
93/4”
115/8”
137/8”

T

W

(84.1)

7/16”

(11.1)

1/8”

(3.2)

(95.2)

7/16”

(11.1)

1/8”

(3.2)

(101.6)

7/16”

(11.1)

1/8”

(3.2)

(109.5)

7/16”

(11.1)

1/8”

(3.2)

(139.7)

7/16”

(11.1)

1/4”

(6.3)

(161.9)

9/16”

(14.3)

1/4”

(6.3)

(177.8)

9/16”

(14.3)

1/4”

(6.3)

(192.1)

9/16”

(14.3)

1/4”

(6.3)

(219.1)

11/16”

(17.4)

1/4”

(6.3)

(247.6)

(17.4)

1/4”

(6.3)

(295.3)

11/16”
13/16”

(20.6)

3/8”

(9.5)

(352.4)

13/16”

(20.6)

3/8”

(9.5)

1”
1”
1”
1”
1”
1”
1”
1”
11/4”
11/4”
11/2”
11/2”

(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(31.7)
(31.7)
(38.1)
(38.1)

kN

Lbs.

kg

500
500
500
800
1040
1040
1040
1040
1040
1040
1615
1615

(2.22)

71
76
77
79
166
179
190
203
320
353
637
837

(32.2)

(2.22)
(2.22)
(3.56)
(4.62)
(4.62)
(4.62)
(4.62)
(4.62)
(4.62)
(7.18)
(7.18)

Reference page 126 for general fitting and standard finish specifications.

144

Wt./C

Lbs.

(34.5)
(34.9)
(35.8)
(75.3)
(81.2)
(86.2)
(92.1)
(145.1)
(160.1)
(288.9)
(379.6)

Pipe Brackets
B591 SERIES
PIPE BRACKET SADDLE AND CLAMP
• Safety Factor of 3
• Inside brace not required on B591-2 and B591-21/2
• Includes:
1 pc. Saddle bottom
1 pc. Saddle top (clamp)
2 pcs. Hex Head Cap Screws
2 pcs. Hex Nuts
• Standard finish: ZN

113/16”
(30.1)
Pipe Size

1/4”
(6.3)

B D
W
A
Pipe/Conduit Clamps &
Hangers

C

Design Load

Wt./C

Design Load
Part No.
B591-2
B591-21/2
B591-3
B591-31/2
B591-4
B591-5
B591-6
B591-8

Pipe Size
2”

(50)

21/2”

(65)

3”
31/2”
4”
5”
6”
8”

(80)
(90)
(100)
(125)
(150)
(200)

A
41/2”
5”
51/2”
6”
61/2”
71/2”
8”
9”

(114.3)
(127.0)
(139.7)
(152.4)
(165.1)
(190.5)
(203.2)
(228.6)

B
41/2”
5”
53/4”
63/4”
63/4”
8”
83/4”
101/2”

C

(114.3) 73/16” (182.6)
(127.0) 715/16” (201.6)
(146.0) 83/4” (222.2)
(171.4)
(171.4)
(203.2)
(222.2)
(266.7)

91/2”
101/4”
121/8”
133/16”
159/16”

(241.3)
(260.3)
(308.0)
(335.0)
(395.3)

D
31/16”
39/16”
313/16”
49/16”
61/16”
61/16”
613/16”
89/16”

W
(77.8) 15/8” (41.3)
(90.5)
(96.8)

15/8” (41.3)
15/8” (41.3)

(115.9) 15/8” (41.3)
(128.6) 15/8” (41.3)
(154.0) 15/8” (41.3)
(173.0) 15/8” (41.3)
(217.5)

2”

(50.8)

Lbs.

kN

Lbs.

kg

1235
1180
1125
1070
1015
960
905
850

(5.53)

290
330
439
490
545
666
724
1087

(131.5)

Reference page 126 for general fitting and standard finish specifications.

145

(5.29)
(5.04)
(4.79)
(4.55)
(4.30)
(4.05)
(3.81)

(149.7)
(199.1)
(222.2)
(247.2)
(302.1)
(328.4)
(493.0)

Pipe Block
B356
PIPE BLOCK-2” (50) TO 8” (200) PIPE

Pipe/Conduit Clamps &
Hangers

• Required hardware not included:
1 pc. 3/8”-16 x 1” Hex Head Cap Screw
1 pc. 3/8”-16 Channel Nut
• Material: 1/4” (6.3) thick 15/8” (41.3) wide
ASTM A1018 33,000 PSI min. yield
• Standard finish: ZN
• Wt./C 42 Lbs. (19.0 kg) Per Pair

Hole For 3/8”-16 HHCS

1”
(25.4)

31/16”
(77.8)

Reference page 126 for general fitting and standard finish specifications.

146

Pipe Rollers
B218

PIPE ROLLERS-1/2” (15) TO 8” (200) PIPE
• Design Load 500 Lbs. (2.22 kN)
• Safety Factor of 5
• When used with B3160 thru B3165 Saddles
(See Pipe Hanger Catalog)
• Malleable Iron Rollers
• Sold in pairs
• Required hardware not included:
2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws
2 pcs. 1/2”-13 Channel Nuts
• Standard finish: ZN
• Wt./C 256 Lbs. (116.1 kg) Per Pair

B

25/8”
(66.7)

A

REFERENCE CHART - A DIMENSION
Insulation Thickness in. (mm)
Pipe Size
1/2”

(15)

3/4”

(20)

1”

(25)

11/4”

(32)

11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”

(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)

0” (0.0)
71/4”
71/4”
71/4”
71/4”
71/4”
71/4”
71/4”
71/4”
71/4”
75/8”
81/2”
9”
10”

1” (25.4)

(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(193.7)
(215.9)
(228.6)
(254.0)

–
71/4”
71/4”
71/4”
75/8”
75/8”
8”
81/2”
81/2”
9”
9”
10”
11”

–
(184.1)
(184.1)
(184.1)
(193.7)
(193.7)
(203.2)
(215.9)
(215.9)
(228.6)
(228.6)
(254.0)
(279.4)

11/2” (38.1)
–
75/8”
75/8”
8”
8”
81/2”
81/2”
9”
9”
9”
10”
10”
11”

2” (50.8)

–
(193.7)
(193.7)
(203.2)
(203.2)
(215.9)
(215.9)
(228.6)
(228.6)
(228.6)
(254.0)
(254.0)
(279.4)

–
8”
81/4”
81/4”
81/2”
81/2”
9”
9”
10”
10”
10”
11”
11”

–
(203.2)
(209.5)
(209.5)
(215.9)
(215.9)
(228.6)
(228.6)
(254.0)
(254.0)
(254.0)
(279.4)
(279.4)

21/2” (63.5)
–
–
–
–
9”
9”
10”
10”
10”
10”
11”
11”
12”

–
–
–
–
(228.6)
(228.6)
(254.0)
(254.0)
(254.0)
(254.0)
(279.4)
(279.4)
(304.8)

3” (76.2)
–
–
–
–
–
–
–
10”
10”
11”
11”
11”
–

–
–
–
–
–
–
–
(254.0)
(254.0)
(279.4)
(279.4)
(279.4)

–

4” (101.6)
–
–
–
–
–
–
–
–
–
–
12”
12”
–

–
–
–
–
–
–
–
–
–
–
(304.8)
(304.8)

–

REFERENCE CHART - B DIMENSION
Insulation Thickness in. (mm)
Pipe Size
1/2”

(15)

3/4”

(20)

1”

(25)

11/4”

(32)

11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”

(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)

0” (0.0)
211/16”
213/16”
215/16”
31/8”
31/4”
39/16”
313/16”
41/8”
43/8”
45/8”
5”
1
5 /2”
615/16”

1” (25.4)

(68.3)
(71.4)
(74.6)
(79.4)
(82.5)
(90.5)
(96.8)
(104.8)
(111.1)
(117.5)
(127.0)
(139.7)
(160.3)

–
37/8”
43/16”
43/16”
43/8”
411/16”
47/8”
51/16”
55/16”
59/16”
61/16”
67/16”
73/8”

–
(98.4)
(106.4)
(106.4)
(111.1)
(119.1)
(123.8)
(128.6)
(134.9)
(141.3)
(154.0)
(163.5)
(187.3)

11/2” (38.1)
–
43/8”
411/16”
45/8”
47/8”
51/16”
55/16”
59/16”
513/16”
61/16”
67/16”
615/16”
715/16”

2” (50.8)

–
(111.1)
(119.1)
(117.5)
(123.8)
(128.6)
(134.9)
(141.3)
(147.6)
(154.0)
(163.5)
(176.2)
(201.6)

–
47/8”
51/16”
51/8”
55/16”
55/8”
6”
61/8”
61/4”
67/16”
7”
3
7 /8”
87/16”

–
(123.8)
(128.6)
(130.2)
(134.9)
(142.9)
(152.4)
(155.6)
(158.7)
(163.5)
(177.8)
(187.3)
(214.3)

21/2” (63.5)
–
–
–
–
53/4”
61/16”
63/8”
67/16”
611/16”
615/16”
73/8”
715/16”
815/16”

–
–
–
–
(146.0)
(154.0)
(161.9)
(163.5)
(169.9)
(176.2)
(187.3)
(201.6)
(227.0)

3” (76.2)
–
–
–
–
–
–
–
7”
71/4”
73/8”
77/8”
81/2”
–

Reference page 126 for general fitting and standard finish specifications.

147

–
–
–
–
–
–
–
(177.8)
(184.1)
(187.3)
(200.0)
(215.9)

–

4” (101.6)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
813/16” (223.8)
91/2” (241.3)
–
–

Pipe/Conduit Clamps &
Hangers

23/8”
(60.3)

Pipe Rollers
B219

PIPE ROLLER SERIES - 3/4” (20) TO 12” (300) PIPE
•
•
•
•
•
•
•
•
•

Design Load 750 Lbs. (3.33 kN)
Safety Factor of 5
Requires field assembly
When used with B3160 thru B3165 Saddles
(See Pipe Hanger Catalog)
Malleable Iron Rollers
Sold in pairs
Required hardware not included:
2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws
2 pcs. 1/2”-13 Channel Nuts
Reference sizing chart on page 135
Standard finish: ZN

B

Pipe/Conduit Clamps &
Hangers

25/8”
(66.7)
A

23/8”
(60.3)
REFERENCE CHART - A DIMENSION
Wt./C PR
Part No.
B219
B219-1
B219-2
B219-3
B219-4
B219-5

A
71/4”
8”
9”
10”
107/8”
115/8”

(184.1)
(203.2)
(228.6)
(254.0)
(276.2)
(295.3)

Lbs.

kg

253
258
263
269
274
279

(114.7)
(117.0)
(119.3)
(122.0)
(124.8)
(126.5)

REFERENCE CHART - B DIMENSION
Insulation Thickness in. (mm)
Pipe Size
1/2”
3/4”

1”
11/4”
11/2”
2”
21/2”
3”
1
3 /2”
4”
5”
6”
8”
10”
12”

0” (0.0)

211/16”
(20) 213/16”
(25) 215/16”
(32)
31/8”
(40)
31/4”
(50)
39/16”
(65)
33/4”
(80)
41/8”
(90)
41/4”
(100) 49/16”
(125) 51/16”
(150) 57/16”
(200)
63/8”
(250) 75/16”
(300) 81/4”
(15)

1” (25.4)

(68.3)
(71.4)
(74.6)
(79.4)
(82.5)
(90.5)
(95.2)
(104.8)
(107.9)
(115.9)
(128.6)
(138.1)
(161.9)
(185.7)
(209.5)

–
37/8”
43/16”
43/16”
47/16”
45/8”
47/8”
51/8”
51/4”
51/2”
61/16”
67/16”
77/16”
83/16”
–

–
(98.4)
(106.4)
(106.4)
(112.7)
(117.5)
(123.8)
(130.2)
(133.3)
(139.7)
(154.0)
(163.5)
(188.9)
(208.0)

–

11/2” (38.1)
–
41/2”
45/8”
45/8”
47/8”
53/16”
51/4”
59/16”
513/16”
61/16”
67/16”
615/16”
715/16”
–
–

2” (50.8)

–
(114.3)
(117.5)
(117.5)
(123.8)
(131.8)
(133.3)
(141.3)
(147.6)
(154.0)
(163.5)
(176.2)
(201.6)

–
–

–
47/8”
51/16”
51/8”
51/4”
51/2”
6”
61/16”
61/4”
67/16”
7”
73/8”
83/8”
–
–

–
(123.8)
(128.6)
(130.2)
(133.3)
(139.7)
(152.4)
(154.0)
(158.7)
(163.5)
(177.8)
(187.3)
(212.7)

–
–

21/2” (63.5)
–
–
–
–
53/4”
61/16”
63/8”
67/16”
611/16”
615/16”
73/8”
77/8”
9”
–
–

–
–
–
–
(146.0)
(154.0)
(161.9)
(163.5)
(169.9)
(176.2)
(187.3)
(200.0)
(228.6)

–
–

3” (76.2)
–
–
–
–
–
–
–
615/16”
71/16”
73/8”
77/8”
815/16”
–
–
–

Reference B219 sizing chart on page 149

Reference page 126 for general fitting and standard finish specifications.

148

–
–
–
–
–
–
–
(176.2)
(179.4)
(187.3)
(200.0)
(211.1)

–
–
–

4” (101.6)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
815/16” (227.0)
99/16” (242.9)
–
–
–
–
–
–

Pipe Rollers
B219 SIZING CHART
0” (0.0)

1” (25.4)

1/2”

B219
B219
B219
B219
B219
B219
B219
B219
B219-1
B219-1
B219-1
B219-2
B219-3
B219-4
B219-5

–
B219
B219
B219
B219
B219-1
B219-1
B219-1
B219-2
B219-2
B219-2
B219-3
B219-4
B219-5
–

3/4”

1”
11/4”
11/2”
2”
1
2 /2”
3”
31/2”
4”
5”
6”
8”
10”
12”

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)

Insulation Thickness in. (mm)
11/2” (38.1)
2” (50.8)
21/2” (63.5)
–
B219
B219-1
B219-1
B219-1
B219-1
B219-2
B219-2
B219-2
B219-2
B219-3
B219-3
B219-4
–
–

–
B219-1
B219-1
B219-1
B219-2
B219-2
B219-2
B219-2
B219-3
B219-3
B219-3
B219-4
B219-5
–
–

–
–
–
–
B219-2
B219-2
B219-3
B219-3
B219-3
B219-3
B219-4
B219-4
B219-5
–
–

3” (76.2)
–
–
–
–
–
–
–
B219-3
B219-4
B219-4
B219-4
B219-5
–
–
–

Reference page 126 for general fitting and standard finish specifications.

149

4” (101.6)
–
–
–
–
–
–
–
–
–
–
B219-5
B219-5
–
–
–

Pipe/Conduit Clamps &
Hangers

Pipe Size

Pipe Rollers
B379
PIPE ROLLERS-6” (150) TO 18” (450) PIPE
•
•
•
•
•
•
•
•
•

Design Load 1500 Lbs. (6.67 kN)
Safety Factor of 5
Requires field assembly
When used with B3160 thru B3165 Saddles
(See Pipe Hanger Catalog)
Malleable Iron Rollers
Sold in pairs
Required hardware not included:
2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws
2 pcs. 1/2”-13 Channel Nuts
Standard finish: ZN
Wt./C 889 Lbs. (403.2 kg)

B

Pipe/Conduit Clamps &
Hangers

4”
(101.6)

A

REFERENCE CHART - A DIMENSION
Insulation Thickness in. (mm)
Pipe Size
6”
8”
10”
12”
14”
16”
18”

(150)
(200)
(250)
(300)
(350)
(400)
(450)

0” (0.0)
99/16”
101/4”
11”
1111/16”
121/16”
123/4”
131/2”

1” (25.4)

(242.9)
(260.3)
(279.4)
(296.9)
(306.4)
(323.8)
(342.9)

103/16”
111/16”
113/4”
129/16”
127/8”
131/2”
141/4”

11/2” (38.1)

2” (50.8)

(258.8) 105/8” (269.9)
(281.0) 113/8” (288.9)
(298.4) 121/8” (308.0)
(319.1) 127/8” (327.0)
(327.0) 133/16” (335.0)
(342.9) 137/8” (352.4)
(361.9) 145/8” (371.5)

11”
113/4”
121/2”
131/4”
139/16”
1413/16”
15”

(279.4)

21/2” (63.5)
113/8” (288.9)

(298.4) 123/16” (309.6)
(317.5) 1213/16” (325.4)
(336.5) 139/16” (344.5)

137/8” (352.4)
(360.4) 141/2” (368.3)
(381.0) 155/16” (388.9)
(344.5)

3” (76.2)
113/4”
121/2”
131/8”
137/8”
141/4”
147/8”
155/8”

(298.4)
(317.5)
(333.4)
(352.4)
(361.9)
(377.8)
(396.9)

4” (101.6)
121/2”
131/4”
137/8”
145/8”
147/8”
151/2”
165/16”

(317.5)
(336.5)
(352.4)
(371.5)
(377.8)
(393.7)
(414.3)

REFERENCE CHART - B DIMENSION
Pipe Size
6”
8”
10”
12”
14”
16”
18”

(150)
(200)
(250)
(300)
(350)
(400)
(450)

0” (0.0)
67/8”
713/16”
813/16”
93/4”
105/16”
115/16”
121/4”

1” (25.4)

(174.6)
(198.4)
(223.8)
(247.6)
(261.9)
(287.3)
(311.1)

77/8”
87/8”
97/8”
1015/16”
113/8”
125/16”
131/4”

Insulation Thickness in. (mm)
1
1 /2” (38.1)
2” (50.8)
21/2” (63.5)

83/8”
(225.4) 93/8”
(250.8) 107/16”
(277.8) 113/8”
(288.9) 117/8”
(312.7) 1213/16”
(336.5) 133/4”
(200.0)

(212.7)
(238.1)
(265.1)
(288.9)
(301.6)
(325.4)
(349.2)

87/8”
97/8”
1015/16”
117/8”
125/16”
131/4”
143/16”

(225.4)
(250.8)
(277.8)
(301.6)
(312.7)
(336.5)
(360.4)

93/8”
107/16”
113/8”
125/16”
1213/16”
133/4”
1411/16”

(238.1)
(265.1)
(228.9)
(312.7)
(325.4)
(349.2)
(373.1)

3” (76.2)
97/8”
1015/16”
117/8”
1213/16”
131/4”
141/4”
151/8”

Reference page 126 for general fitting and standard finish specifications.

150

4” (101.6)

(250.8) 1015/16” (277.8)
(277.8)
(301.6)
(325.4)
(336.5)
(361.9)
(384.2)

117/8” (301.6)
1213/16” (325.4)
133/4” (349.2)
141/4” (361.9)
151/8” (384.2)
161/16” (408.0)

Pipe Rollers
B479
PIPE ROLLERS-16” (400) TO 30” (750) PIPE
•
•
•
•
•
•
•
•
•

Design Load 2000 Lbs. (8.89 kN)
Safety Factor of 5
Requires field assembly
When used with B3160 thru B3165 Saddles
(See Pipe Hanger Catalog)
Malleable Iron Rollers
Sold in pieces
Required hardware not included:
4 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws
4 pcs. 1/2”-13 Channel Nuts
Standard finish: ZN
Wt./C 889 Lbs. (403.2 kg)

Pipe/Conduit Clamps &
Hangers

B

4”
(101.6)

A
213/16”
(71.4)

REFERENCE CHART - A DIMENSION
Pipe Size
16”
18”
20”
24”
30”

(400)
(450)
(500)
(600)
(750)

0” (0.0)
153/16”
151/2”
16”
1613/16”
1713/16”

1” (25.4)

(385.8)
(393.7)
(406.4)
(427.0)
(452.4)

155/8”
16”
163/8”
175/16”
181/4”

(396.9)
(406.4)
(415.9)
(439.7)
(463.5)

Insulation Thickness in. (mm)
11/2” (38.1)
2” (50.8)
21/2” (63.5)
157/8”
163/16”
169/16”
171/2”
183/8”

(403.2)
(411.2)
(420.7)
(444.5)
(466.7)

16”
163/8”
167/8”
171/2”
189/16”

(406.4)
(415.9)
(428.6)
(444.5)
(471.5)

161/4”
169/16”
1615/16”
1711/16”
187/8”

(412.7)
(420.7)
(430.2)
(449.3)
(476.2)

3” (76.2)
161/2”
163/4”
173/16”
177/8”
187/8”

(419.1)

4” (101.6)
17”

(431.8)

(425.4) 173/16” (436.6)
(436.6) 171/2” (444.5)
(454.0) 181/8” (460.4)
(479.4) 191/4” (488.9)

REFERENCE CHART - B DIMENSION
Insulation Thickness in. (mm)
Pipe Size
16”
18”
20”
24”
30”

0” (0.0)

1013/16”
117/8”
(500) 123/16”
(600) 1413/16”
(750) 1713/16”

1” (25.4)

(400)

(274.6) 1115/16” (303.2)

(450)

(301.6) 1215/16” (328.6)
(325.4) 1315/16” (354.0)
(376.2)

157/8”

(452.4)

187/8” (479.4)

(403.2)

11/2” (38.1)
123/8”
137/16”
147/16”
163/8”
193/8”

2” (50.8)

(314.3) 1215/16” (328.6)
(341.3) 1315/16” (354.0)
(366.7) 147/8”

(377.8)

167/8”

(428.6)

(492.1) 197/8”

(504.8)

(415.9)

21/2” (63.5)
133/8”
147/16”
157/16”
173/8”
203/8”

3” (76.2)

(339.7) 1315/16” (354.0) 1415/16” (379.4)
(366.7) 1415/16” (379.4) 1515/16” (404.8)

157/8” (403.2) 1615/16” (430.2)
(441.3) 177/8” (454.0) 187/8” (479.4)
(517.5) 205/16” (531.8) 2115/16” (557.2)
(392.1)

Reference page 126 for general fitting and standard finish specifications.

151

4” (101.6)

Dura-Blok™ Rooftop Supports
Cooper B-Line’s new line of Dura-Blok™ products
gives you a versatile and long-term solution for
all your roof top support needs. Designed with
flexibility in mind, Dura-Blok is ideal for roof top
support applications such as pipe, HVAC, duct,
conduit, cable tray, and roof walkways.
Manufactured to provide years of service in
harsh, roof top environments, Dura-Blok is
made from 100% recycled rubber, require no
supplemental rubber pads, and will not float or
blow away. 1” gaps between blocks allow water to
flow freely around longer assemblies. For added
strength, the Dura-Blok support channel is
through bolted on all sizes. For added visibility, a
reflective strip is incorporated on both sides of
each Dura-Blok.
Beyond product durability, Dura-Blok helps to
dampen vibration, are not sharp or abrasive and
require no roof penetration to maximize existing
roof life - and roof structural and environmental
integrity.

Recommended Torque (In channels)
Dura-Blok™ Supports

See page 44 Channel Nuts & Hardware section

Materials & Finishes
See appropriate fitting’s pages.
Alternative finishes available upon request.

Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in millimeters.

152

Dura-Blok™ Rooftop Supports
SUPPORT BASES ONLY
•
•
•
•

Base only - see chart for height, width and length.
100% recycled rubber, UV resistant.
Load Rating - Ultimate Uniform Load (See Chart Below)*
Dura-Blok™ channel support is designed as an economical support for piping systems,
cable tray, HVAC equipment and many other applications. The Dura-Blok is UV
resistant and suitable for any type of roofing material or other flat surfaces. Material
effectively accepts screw fasteners for securing accessories.
Height x Width x Length
Part No.

In.

(mm)

Wt./Each

DBM

Load Rating

Lbs.

(kg)

Lbs.

(kN)

DBM

4” x 6” x 4.8” (101.6 x 152.4 x 121.9)

2.35

(1.07)

200

(0.89)

DBP

4” x 6” x 9.6” (101.6 x 152.4 x 243.8)

4.48

(2.03)

500

(2.22)

DBP

DB SERIES SUPPORT BASE WITH B44 CHANNEL
• Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating - Ultimate Uniform Load (See Chart Below)*
• Dura-Blok™ DB-Series channel support is designed for superior support of
piping systems, cable tray, HVAC equipment, walkway systems and many other
applications. The Dura-Blok is UV resistant and suitable for installation on any
type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and
roller supports that can be used with these Dura-Blok supports, see page 158)
• For sloped roofs use B634 adjustable hinge fittings (see page 84).
Height x Width x Length
Part No.

Wt./Each

(mm)

Lbs.

DB5

5” x 6” x 4.8”

(127.0 x 152.4 x 121.9)

DB10

5” x 6” x 9.6”

(127.0 x 152.4 x 243.8)

DB20
DB30

Load Rating

(kg)

Lbs.

(kN)

2.75

(125)

200

(0.89)

5.28

(2.39)

500

(2.22)

5” x 6” x 20.2” (127.0 x 152.4 x 513.1)

10.63

(4.82)

1000

(4.45)

5” x 6” x 30.8” (127.0 x 152.4 x 782.3)

15.99

(7.25)

1500

(6.67)

DB40

5” x 6” x 41.4” (127.0 x 152.4 x 1051.5)

21.34

(9.68)

2000

(8.89)

DB48

5” x 6” x 52.0” (127.0 x 152.4 x 1320.8)

26.70 (12.40)

2500

(11.12)

DB20

DB30

DB6 SERIES SUPPORT BASE WITH B12 CHANNEL
• Base with 12 ga. (2.6mm) galvanized channel 27/16” high (61.9mm) see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating - Ultimate Uniform Load (See Chart Below)*
• Dura-Blok™ DB-Series channel support is designed for superior support of piping
systems, cable tray, HVAC equipment, walkway systems and many other
applications. The Dura-Blok is UV resistant and suitable for installation on any
type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and
roller supports that can be used with these Dura-Blok supports, see page 158)
• For sloped roofs use B634 adjustable hinge fittings (see page 84).
Height x Width x Length

Wt./Each

Load Rating

Part No.

In.

(mm)

Lbs.

(kg)

Lbs.

(kN)

DB610

67/16” x 6” x 9.6”

(163.5 x 152.4 x 243.8)

6.36

(2.88)

500

(2.22)

DB620

67/16” x 6” x 20.2” (163.5 x 152.4 x 513.1)

12.90

(5.85)

1000

(4.45)

DB630

67/16”

19.45

(8.82)

1500

(6.67)

DB640

67/16” x 6” x 41.4” (163.5 x 152.4 x 1051.5) 26.00

(11.79)

2000

(8.89)

DB648

67/16” x 6” x 52.0” (163.5 x 152.4 x 1320.8) 32.55

(14.76)

2500

(11.12)

x 6” x 30.8” (163.5 x 152.4 x 782.3)

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.

Reference page 152 for general fitting and standard finish specifications.

153

DB610

DB620

DB630

Dura-Blok™ Supports

In.

DB10

Dura-Blok™ Rooftop Supports
DB10 SERIES
SUPPORT BASES WITH B22 CHANNEL
• Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel
15/8” high (41.3mm) - see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating: 1000 lbs. (4.45kN) (Uniform Load)*
• Dura-Blok™ DB10-Series channel support is designed for superior support of
piping systems, cable tray, HVAC equipment, walkway systems and many
other applications. The Dura-Blok is UV resistant and suitable for installation
on any type of roofing material or other flat surfaces. (For pipe straps/clamps,
rollers and roller supports that can be used with these Dura-Blok supports,
see page 158)
Height x Width x Length

DB10-36

Wt./Each

Part No.

In.

(mm)

Lbs.

(kg)

DB10-28

55/8” x 6” x 28”

(142.9 x 152.4 x 711.2)

13.16

(5.97)

DB10-36

55/8”

x 6” x 36”

(142.9 x 152.4 x 914.4)

14.36

(6.51)

DB10-42

55/8” x 6” x 42”

(142.9 x 152.4 x 1066.8)

15.52

(7.04)

DB10-50

55/8”

x 6” x 50”

(142.9 x 152.4 x 1270.0)

16.45

(7.46)

DB10-60

55/8” x 6” x 60”

(142.9 x 152.4 x 1524.0)

17.94

(8.14)

DB10-50

DBM SERIES

Dura-Blok™ Supports

SUPPORT BASE WITH RISER ROD & CLAMP
• Base with 3/8”-16 threaded rod and B3198H clamp see chart for height, width and length
• 100% recycled rubber, UV resistant.
• Load Rating” 50 lbs. (0.22kN) (Ultimate Load)*
• Dura-Blok™ DBM-Series pipe/tubing support is designed for support of
single piping systems where elevation adjustment is needed. The
Dura-Blok is UV resistant and suitable for installation on any type of
roofing material or other flat surfaces.

DBM-1

DBM-2CT

Part No.

Clamp
Part No.†

DBM-1/2CT

B3198HCT-1/2

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.69”-11.19”

DBM-3/4CT

B3198HCT-3/4

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.95”-11.45”

In.

(mm)

Height** Min.-Max.
In.

Wt./Each

(mm)

Lbs.

(kg)

(246.1-284.2)

2.75

(1.25)

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.84”-11.34” (249.9-2288.0)

2.76

(1.25)

(252.7-290.8)

2.84

(1.29)

DBM-11/4CT

B3198HCT-11/4

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.13”-11.63” (257.3-295.4)

2.95

(1.34)

DBM-11/2CT

B3198HCT-11/2

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.28”-11.78” (261.1-299.2)

2.96

(1.34)

DBM-2CT

B3198HCT-2

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.53”-12.03” (267.4-305.5)

3.03

(1.37)

DBM-1/2

B3198H-1/2

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.86”-11.36”

(250.4-288.5)

2.78

(1.26)

DBM-3/4

B3198H-3/4

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.06”-11.56” (255.5-293.6)

2.84

(1.29)

DBM-1

B3198H-1

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.14”-11.64” (257.5-295.6)

2.86

(1.30)

DBM-11/4

B3198H-11/4

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.25”-11.75” (260.3-298.4)

2.93

(1.33)

DBM-11/2

B3198H-11/2

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.42”-11.92” (264.6-302.7)

2.99

(1.36)

B3198H-2

4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.66”-12.16” (270.7-308.8)

3.10

(1.41)

DBM-1CT

DBM-2

B3198HCT-1

Block -Height x Width x Length

† See Pipe Hanger Catalog for dimensions and specifications.

** From bottom of rubber block to center of pipe/tubing.

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.

Reference page 152 for general fitting and standard finish specifications.

154

Dura-Blok™ Rooftop Supports
DBE SERIES
SUPPORT BASE WITH ROD RISERS & CHANNEL
• Base with (2) 1/2” electro zinc all threaded rod risers - Top channel is 1” (25.4mm) tall.
See chart for adjustable height x wide x length.
• 100% recycled rubber, UV resistant.
• Load Rating” 200 lbs. (0.89kN) (To increase load capacity use load distribution plate
CLDP10)
• Dura-Blok™ DBE-Series channel support is designed as a superior support of piping
systems, cable tray, HVAC equipment and many other applications where elevation
adjustment is critical. The Dura-Blok is UV resistant and suitable for installation on
any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers
and roller supports that can be used with these Dura-Blok supports, see page 158)
Adjustable Height x Width x Length

Wt./Each

Part No.

In.

(mm)

Lbs.

(kg)

DBE10-8
DBE10-12
DBE10-16

51/2-8” x 6” x 9.6”
51/2-12” x 6” x 9.6”
51/2-16” x 6” x 9.6”

(139.7-152.4 x 152.4 x 243.8)

5.68
5.72
5.76

(2.58)

(139.7-304.8 x 152.4 x 243.8)
(139.7-406.4 x 152.4 x 243.8)

(2.59)
(2.61)

DBR SERIES
SUPPORT BASE WITH ROD RISERS & PIPE ROLL

Adjustable Height x Width x Length
Part No.

In.

Dura-Blok™ Supports

• Base with (2) 1/2” electro zinc all threaded rod risers and a
B3114-31/2 pipe roll with sockets - base is 4” (101.6mm) high x 6” (152.4mm)
wide x 9.6” (243.8mm) long. Overall height is 12” (304.8mm) from bottom of
base to contact point on roller.
• Pipe roll & sockets for up to 31/2” (90) pipe sizes.
• 100% recycled rubber, UV resistant.
• Load Rating” 200 lbs. (0.89kN) (To increase load capacity use load distribution plate
CLDP10)
• Dura-Blok™ DBR-Series support is designed to support pipe up to 31/2” (90) nominal
size where difference in elevation is required and longitudinal movement is
expected. The Dura-Blok is UV resistant and approved for installation on any type
of roofing material or other flat surfaces.
Wt./Each

(mm)

DBR10-12 up to 12” x 6” x 9.6” (up to 304.8 x 152.4 x 243.8)

Lbs.

(kg)

8.20

(3.72)

CLDP10
LOAD DISTRIBUTION PLATE
• 11 ga. (3.0mm) steel plate with slots.
• Dimensions: 15/8” (41.3mm) wide x 91/2” (241.3mm) long.
• Dura-Blok™ CLDP10 load bearing stabilizer plate increases load ratings
for DBE Series and DBR Series by allowing the load from the threaded
rods to be distributed over the length of the base instead of the point
load where the rods attach to the base.
Thickness x Width x Length
Part No.
CLDP10

Loosen hex nuts and
slide plate under the
flat washers

Wt./Each

In.

(mm)

Lbs.

(kg)

11 Ga. x 15/8” x 91/2”

(3.0 x 41.3 x 241.3)

0.53

(0.24)
Retighten the hex nuts
with plate in place

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.

Reference page 152 for general fitting and standard finish specifications.

155

Dura-Blok™ Rooftop Supports
DB__DS SERIES
SUPPORT BASES WITH B22SH
VERTICAL & HORIZONTAL CHANNEL MEMBERS
• Product is shipped unassembled.
• Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) Bases are 5” (127.0mm) high x 6” (152.4mm) wide x 20.2” (513.1mm) long.
Vertical & Horizontal Riser Channels (SH Style) - 15/8” (41.3mm) x 15/8” (41.3mm) x 12 ga. (2.6mm)
Fittings & Hardware - Electro-Plated Steel
• 100% recycled rubber, UV resistant.
• Ultimate Load Rating: 1000 lbs. (4.45kN) (Uniform Load)*
• Dura-Blok™ DB__DS-Series channel support with risers is designed for superior support of piping
systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok
is UV resistant and suitable for installation on any type of roofing material or other flat surfaces.
(For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports,
see page 158)

B + 4.5”

(114mm)

Dura-Blok™ Supports

B

Height

DB2318DS

(overall)

A

Length
Width
(overall)

DB2924DS

DB5336DS

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.

Reference page 152 for general fitting and standard finish specifications.

156

(overall)

Dura-Blok™ Rooftop Supports
DB__DS SERIES cont.
A Min. to Max.
Part No.

In.

B

(mm)

In.

(mm)
(343)

DB2318DS

10.56” to 20.75”

(268 to 527)

131/2”

DB2918DS

10.56” to 26.75”

(268 to 679)

131/2”

(343)
(343)

DB4118DS

10.56” to 38.75”

(268 to 984)

131/2”

DB5318DS

10.56” to 50.75” (268 to 1289)

131/2”

(343)

DB2324DS

10.56” to 20.75”

(268 to 527)

191/2”

(495)

DB2924DS

10.56” to 26.75”

(268 to 679)

191/2”

(495)
(495)

DB4124DS

10.56” to 38.75”

(268 to 984)

191/2”

DB5324DS

10.56” to 50.75” (268 to 1289)

191/2”

(495)

DB2336DS

10.56” to 20.75”

(268 to 527)

311/2”

(800)

DB2936DS

10.56” to 26.75”

(268 to 679)

311/2”

(800)
(800)

DB4136DS

10.56” to 38.75”

(268 to 984)

311/2”

DB5336DS

10.56” to 50.75” (268 to 1289)

311/2”

(800)

DB2348DS

10.56” to 20.75”

(268 to 527)

431/2”

(1105)

DB2948DS

10.56” to 26.75”

(268 to 679)

431/2”

(1105)
(1105)
(1105)

DB4148DS

10.56” to 38.75”

(268 to 984)

431/2”

DB5348DS

10.56” to 50.75” (268 to 1289)

431/2”

Width (overall)

In.

(mm)

In.

DB2318DS

23”

(584)

255/8”

(651)

(mm)

Length (overall)
In.

Wt./Each

(mm)

lbs.

(kg)

20.2”

(513)

33.31

(15.11)

DB2918DS

29”

(736)

255/8”

(651)

20.2”

(513)

35.00

(15.88)

DB4118DS

41”

(1041)

255/8”

(651)

20.2”

(513)

38.40

(17.42)

DB5318DS

53”

(1346)

255/8”

(651)

20.2”

(513)

41.80

(18.96)

DB2324DS

23”

(584)

315/8”

(803)

20.2”

(513)

34.15

(15.49)

(803)

20.2”

(513)

35.84

(16.26)

(803)

20.2”

(513)

39.25

(17.80)

DB2924DS

29”

(736)

315/8”

DB4124DS

41”

(1041)

315/8”

DB5324DS

53”

(1346)

315/8”

(803)

20.2”

(513)

42.65

(19.34)

DB2336DS

23”

(584)

435/8”

(1108)

20.2”

(513)

35.84

(16.26)

(1108)

20.2”

(513)

37.56

(17.03)

(1108)

20.2”

(513)

40.95

(18.57)

DB2936DS

29”

(736)

435/8”

DB4136DS

41”

(1041)

435/8”

DB5336DS

53”

(1346)

435/8”

(1108)

20.2”

(513)

44.34

(20.11)

DB2348DS

23”

(584)

555/8”

(1415)

20.2”

(513)

37.55

(17.03)

DB2948DS

29”

(736)

555/8”

(1415)

20.2”

(513)

39.25

(17.80)

DB4148DS

41”

(1041)

555/8”

(1415)

20.2”

(513)

42.65

(19.34)

(1346)

555/8”

(1415)

20.2”

(513)

46.03

(20.88)

DB5348DS

53”

A = Adjustable height from bottom of Dura-Blok to top of horizontal channel.
B = Space between fittings that support horizontal channel.
Height (overall) = Distance from bottom of Dura-Blok to top of upright channel.
Width (overall) = Distance from outside-to-outside of Dura-Blok supports.
Length (overall) = Distance from end-to-end of Dura-Blok supports.
Reference page 152 for general fitting and standard finish specifications.

157

Dura-Blok™ Supports

Height (overall)
Part No.

Dura-Blok™ Rooftop Supports
DBR SERIES
SUPPORT BASES WITH B42 CHANNEL & PIPE ROLLER
• Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) tall see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating: (See Chart Below)*
• Dura-Blok™ DBR-Series support is designed to support pipe where
longitudinal movement is expected. The Dura-Blok is UV resistant and
approved for installation on any type of roofing material or other flat
surfaces.

DBR4-6

DBR16-20
Roller
Part No.†

Part No.
DBR2-31/2

31/2

B3126-2 to

Block & Channel -Height x Width x Length

Wt./Each

Load Rating

(mm)

In.

(mm)

Lbs.

(kg)

Lbs.

(kN)

5” x 6” x 9.6”

(127.0 x 152.4 x 243.8)

7.09”

(180)

5.28

(2.39)

500

(2.22)

DBR4-6

B3126-4 to 6

5” x 6” x 9.6”

(127.0 x 152.4 x 243.8)

7.09”

(180)

10.63

(4.82)

500

(2.22)

DBR8-10

B3126-8-10

5” x 6” x 20.2”

(127.0 x 152.4 x 513.1)

8.34”

(212)

15.99

(7.25)

1000

(4.45)

DBR12-14

B3126-12-14

5” x 6” x 20.2”

(127.0 x 152.4 x 513.1)

9.38”

(238)

21.34

(9.68)

1000

(4.45)

DBR16-20

B3126-16-20

5” x 6” x 20.2”

(127.0 x 152.4 x 513.1)

9.78”

(248)

26.70 (12.11)

1000

(4.45)

† See Pipe Hanger Catalog for dimensions and specifications.

Dura-Blok™ Supports

Height**

In.

** From bottom of rubber block to bottom of pipe/tubing.

Compatible Components Available to make Dura-Blok bases more versatile
(See Strut Systems Catalog for other products)

BTS
TN Nuts

B22SH

B22TH
HHCS

B2400
Series

B104

B101
B634

B-LINE
50
BVP1” I.P
I.P..
1 1/2

B2000 Series

B3124
Series

BVT Series

B218

B379

B219 Series

B3126 Series

B479

Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units 19” (482mm) or longer.

Reference page 152 for general fitting and standard finish specifications.

158

Dura-Blok™ Rooftop Supports
ROOFTOP APPLICATIONS

Dura-Blok™ Supports

159

Dura-Blok™ Rooftop Supports
ROOFTOP SUPPORTS IN WALKWAY APPLICATIONS

• Safety Grating is available with slip resistant Grate-Lock™, helping provide a safe
walkway for foot traffic on the roof.

Dura-Blok™ Supports

• Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent
wear and tear to the roof surface.
• The cross-over design offers safe passage over existing cabling, piping, cable tray or
any other interference on the rooftop.
• The self cleaning pattern allows water and dirt to easily flow through, helping make the
grating an ideal walkway in all weather conditions.
• Handrail options are available

160

Dura-Blok™ Rooftop Supports

Dura-Blok™ Supports

161

Electrical Accessories
A complete system of top quality, time saving
products, designed for surface metal raceways,
lighting and cable supports. Innovative designs
offer many installation advantages. Cooper
B-Line’s surface raceways are U.L. listed and
meet the requirements of the National Electrical
Code, Article 352.

Surface Raceways
Cooper B-Line’s channel provides structural
support in addition to a raceway system.
For U.L. wire fill see chart on page 230-231.

Cable Supports
A full range of clamps and saddles are offered in
porcelain, thermoplastic elastomer and maple.
Cooper B-Line’s maple clamps, Insulclamp™ cable
clamps and porcelain saddles are furnished
complete with steel clamps (electro-plated) and
Everdur hardware where required.

Materials & Finishes*
Steel products are made from low carbon steel
strips or plates. Porcelain saddles and clamps are
made by dry process and white glazed (porcelain
dielectric strength is 50 volts per mil). Maple
clamps are made from kiln-dried maple wood,
paraffin impregnated.
Finish
Code
PLN

Finish
Plain

ZN
GRN
GALV
YZN

Electro-Plated Zinc
Dura-Green
Pre-Galvanized
Yellow Zinc Chromate

Specification
ASTM A1011
33,000 PSI min. yield
ASTM B633 SC3 Type III
ASTM B653
ASTM B633 SC3 Type II

Electrical Accessories

*Unless otherwise noted.

Design Load
Design load data published includes a Safety Factor of 3.0 (Safety Factor = Ratio of ultimate load to
the design load).
U.L. listed raceway channels:
B32, B32KO6
B11, B11KO6
B12, B12KO6
B42, B42KO6
B22, B22KO6
B52, B52KO6
B24, B24KO6
B54, B54KO6
B26, B26KO6
B56, B56KO6
U.L. File No. E29637
In all cases, the snap-in closure strip is required to complete raceway enclosure.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

162

Electrical Accessories
(9)
(7)

(11)

(8)
(1)

(5)

(4)

(13)
(1)
(1) or
(1A) (Not Shown)
(6)

(10)

(13)

(3) or
(3A) (Not Shown)
(2)

2

3

3A

4

5

Channel
Hanger

Fixture
Hanger

End Cap

Connection
End Cap

Internal
Straight Splice

Internal
Tee Splice

(82.5) B616-22A*

B241S*

B616S-22A*

B205 or B285

B766-22 (2)

B768-22 (2)

B11
B12
B22
B24
B26

31/4” (82.5) B616-22A*
27/16” (61.9) B616-22A*

B241S*
B241S*

B768-11
B768-12

(41.3)

B616*

B216S*

B392-22**

B766-22

B768-22

15/8”

(41.3)

B616*

–

B222
B221
B205 or B285
B223 or B286
–

B766-11
B766-12

15/8”

B392-22**

–

–

B32

13/8”

(34.9)

B616*

B216S*

B206

B392-32**

B766-32

B768-32

B42

1”

(25.4)

B616*

B215S*

B203

–

B766-42

B768-42

B52
B54

13/16”

(20.6)

B616*

B215S*

B220 or B283
B204 or B284

–

B766-52

B768-52

B56

13/16”

(20.6)

B616*

B215S*

B616S-22A*
B616S-22A*
B616S*
B616TG*
–
B616S*
B616TG*
B616S*
B616TG*
B616S*
B616TG*
B616S*
B616TG*

B392-22**
B285
B392-11**
B392-12**

–

–

B766-56

–

Channel
Number
B22A

Depth
31/4”

1
Channel
Hanger

*Specify Hanger Rod or Conduit Size.
**Specify Conduit Size

OTHER ITEMS SHOWN ON ILLUSTRATION
B217-20

Snap-in Closure Strip
B465

(6) B351L

Beam Clamp
(10) B750

H.I.D. Fixture Hanger

Beam Clamp

(7)

B755

Beam Clamp
(11) B447
B447A

Conduit Connection Plate

(8) B751

Beam Clamp
(12) B719

B718 Series Junction Box

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

163

(9)

(13)

Electrical Accessories

1A

SELECTION CHART

Fluorescent Fixture Hangers
B616-9/16

B616-7/8

CHANNEL HANGER

CHANNEL HANGER

• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
whenused as a fixture support
• Includes:
2 pcs. 3/8” Flat Washers for use with 3/8” ATR
• Material: 16 Gauge (1.5)
9/16” (14.3) Dia. For
• Standard finish: ZN
1/2” ATR
• Wt./C 25 Lbs. (11.3 kg)

• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Material: 16 Gauge (1.5)
• Standard finish: ZN
• Wt./C 25 Lbs. (11.3 kg)

7/8” (22.2) Dia. For
1/2” (15) Conduit

11/2”
(38.1)

11/2”
(38.1)

31/8”
(79.4)

31/8”
(79.4)

B616S-9/16

B616S-7/8

FLUORESCENT FIXTURE
HANGER WITH STUD

FLUORESCENT FIXTURE
HANGER WITH STUD

• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Allows more than 1/2” (12.7) space
between channel and fixture
• Includes:
2 pcs. 3/8” Flat Washers for use with 3/8” ATR
• Material:16 Gauge (1.5)
• Standard finish: ZN
11/2”
(38.1)
• Wt./C 30 Lbs. (13.6 kg)

• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Allows more than 1/2” (12.7) space
between channel and fixture
• Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg)

11/2”
(38.1)

Electrical Accessories

31/8”
(79.4)

31/8”
(79.4)

B616-22A-9/16

B616-22A-7/8

CHANNEL HANGER

CHANNEL HANGER

• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Includes:
2 pcs. 3/8” Flat Washers for use with 3/8” ATR
• Material: 14 Gauge (1.9)
• Standard finish: ZN
•Wt./C 44 Lbs. (19.9 kg)

•Design Load 250 Lbs. (1.11 kN)
•Safety Factor of 3
•Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
•Material: 14 Gauge (1.9)
•Standard finish: ZN
•Wt./C 44 Lbs. (19.9 kg)

11/2”

9/16” (14.3) Dia. For
1/2” ATR

11/2”
(38.1)

(38.1)

7/8” (22.2) Dia. For
1/2” (15) Conduit

51/8”
(130.2)

51/8”
(130.2)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

164

Fluorescent Fixture Hangers
B616S-22A-9/16

B616S-22A-7/8

FLUORESCENT FIXTURE
HANGER WITH STUD

FLUORESCENT FIXTURE
HANGER WITH STUD

• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Includes:
2 pcs. 3/8” Flat Washers for use with 3/8” ATR
• Allows more than 1/2” (12.7) space
between channel and fixture
11/2”
• Material: 14 Gauge (1.9)
(38.1)
• Standard finish: ZN
• Wt./C 49 Lbs. (22.2 kg)
1

• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Allows more than 1/2” (12.7) space
between channel and fixture
• Material: 14 Gauge (1.9)
11/2”
• Standard finish: ZN
(38.1)
• Wt./C 49 Lbs. (22.2 kg)

51/8”
(130.2)

5 /8”

(130.2)

B215S

B616TG-9/16

CHANNEL HANGER

FLUORESCENT FIXTURE
HANGER FOR 1/2” (15) KNOCKOUT
9/16” (14.3) Dia.
For 1/2” ATR

• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
11/2”
• Maximum design load
(38.1)
50 Lbs. (.22 kN) when used as a
fixture support
• Includes:
31/8”
2 pcs. 3/8” Flat Washers for
(79.4)
use with 3/8” ATR
• Design Load 150 Lbs. (.67 kN)
• Allows more than 1/2” (12.7) space
between channel and fixture
• Material: 16 Gauge (1.5)
• Standard finish: ZN
• Wt./C 32 Lbs. (14.5 kg)

Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” conduit
Design Load 250 Lbs. (1.11 kN)
Safety Factor of 3
For use with B42, B52, B54 & B56 Channels
Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR
One (1) 1/2” FW for use with 1/2”-13 ATR
One (1) 5/8” FW for use with 3/8” conduit
7/8” (22.2) Dia.
• Material: 16 Gauge (1.5)
• Standard finish: ZN
• Wt./C 31 Lbs. (14.0 kg)
•
•
•
•
•

23/16”
(55.6)

121/32”
(42.0)

B241S

CHANNEL HANGER

CHANNEL HANGER

• Can be used with 3/8” & 1/2” threaded rod or
3/8” & 1/2” conduit
• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• For use with B22, B24, B26 & B32 Channels
• Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR
One (1) 1/2” FW for use with 1/2”-13 ATR
One (1) 5/8” FW for use with 3/8” conduit
• Material: 16 Gauge (1.5)
7/8” (22.2) Dia.
• Standard finish: ZN
• Wt./C 38 Lbs. (17.2 kg)

Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” conduit
Design Load 250 Lbs. (1.11 kN)
Safety Factor of 3
For use with B11 & B12 Channels.
Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR
One (1) 1/2” FW for use with 1/2”-13 ATR
One (1) 5/8” FW for use with 3/8” conduit
• Material: 16 Gauge (1.5)
7/8” (22.2) Dia.
• Standard finish: ZN
• Wt./C 47 Lbs. (21.3 kg)
•
•
•
•
•

51/16”
(128.6)

31/2”
(88.9)

121/32”

121/32”

(42.0)

(42.0)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

165

Electrical Accessories

B216S

Fluorescent Fixture Hangers
B390S

B390BX

360° SWIVEL CHANNEL CONNECTOR

360° SWIVEL BOX CONNECTOR

• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Swings 15° in 360° plane
• Includes:
2 pcs. SN224-3/4”WO Stud Nut
2 pcs. 1/4”-20 Square Nut
1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer
• Standard finish: ZN
• Wt./C 71 Lbs. (32.2 kg)

• Design Load 250 Lbs. (1.11 kN) for Connector
Fitting only
• Safety Factor of 3
• Design Load 50 Lbs. (.22 kN) when used as
illustrated or for use as a fixture support
• Swings 15° in 360° plane
• Includes:
1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer
• Fits on 4” box
• Standard finish: ZN
• Wt./C 55 Lbs. (24.9 kg)

B465

B436

H.I.D. FIXTURE HANGER

FLUORESCENT FIXTURE NUT

•
•
•
•

•Standard finish: ZN
•Wt./C 2 Lbs. (.9 kg)

Design Load 250 Lbs. (1.11 kN)
Safety Factor of 3
Swings 15° in 360° plane
Includes:
1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer
• Standard finish: ZN
• Wt./C 95 Lbs. (43.1 kg)

21/8”
(54.0)
Tapped For 1/4”-20 Screw

21/16”

B436S

(52.4)

FLUORESCENT FIXTURE STUD NUT

Electrical Accessories

33/4”
(95.2)

•
•
•
•

Bolt size: 1/4” x 11/4”
Standard finish: ZN
Wt./C 4 Lbs. (1.8 kg)
Design Load
250 Lbs. (1.11 kN)
Safety Factor of 3

B460

B464

FLUORESCENT FIXTURE HANGER

FLUORESCENT
FIXTURE HANGER

• Hanger is shipped flat and requires
field bending as shown
• Allows more than 1/2” (12.7)
space between channel and fixture
• Material: 18 Gauge (1.2)
• Standard finish: ZN

1/4”

x 1” Round Head
Machine Screw and
Square Nut Included

For Channel Size

A

15/8”
(41.3)

B22, B24, B26, B32 21/8”
(57.5)
15
B12
2 /16” (79.5)
B11
33/4” (101.6)

A

Part No.

For Channel Size

A

15/8”
(41.3)
Wt./C

Wt./C
Lbs.

B460-22
B460-12
B460-11

x 1” Round Head
Machine Screw and
Square Nut Included

1/4” x 3/4” Carriage Bolt and
Square Nut Included

Square Hole

Part No.

1/4”

• Hanger is shipped flat and
requires field bending as shown
• Allows more than 1/8” (3.2) space
between channel and fixture
• Material: 18 Gauge (1.2)
• Standard finish: ZN

A

9/32” (7.1)

11/4”
(31.7)

kg

17 (7.7)
20 (9.1)
23 (10.4)

B464-32
B464-22
B464-12
B464-11

B32
B22, B24, B26
B12
B11

11/2”
13/4”
29/16”
33/8”

(40.6)
(47.4)
(66.0)
(91.4)

Lbs.

kg

17
18
21
24

(7.7)
(8.1)
(9.5)
(10.9)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

166

Electrical Accessories
B217-20

B217P

B217-24

SNAP CLOSURE STRIP FOR
ALL 15/8” (41.3) WIDE
CHANNELS

PLASTIC SNAP CLOSURE
STRIP FOR ALL 15/8” (41.3)
WIDE CHANNELS

SNAP CLOSURE STRIP FOR ALL
15/8” (41.3) WIDE CHANNELS

• Refer to Raceway Fill Chart
Pg. 214-215
• Material: 20 Gauge (.9)
• Standard finishes: GRN, GALV, YZN
• Standard length: 120” (3.05m)
• Wt./CFT 36 Lbs. (16.3 kg)

• Refer to Raceway Fill Chart
Pg. 214-215
• Standard finishes: Green (GRN) or
Gray (GRY) Plastic
• Standard length: 120” (3.05m)
• Wt./CFT 9.2 Lbs. (4.2 kg)

17/16”

• Refer to Raceway Fill Chart
Pg. 214-215
• For use with 7 or fewer conductors no
larger than #12 AWG
• Material: 24 Gauge (.6)
• Standard finishes: GRN, GALV, YZN
• Standard length: 120” (3.05m)
• Wt./CFT 28 Lbs. (12.7 kg)

113/32”

(36.5)

(35.7)

17/16”
(36.5)
19/32”

(11.9)

1/2”

(15.1)

15/32”
9/32”

5/8”

(12.7)

(7.1)

(15.9)

B516

B516S

SNAP-IN OUTLET BOX

OUTLET BOX

•
•
•
•

• Duplex cover plate included
• Receptacle not furnished
• Includes:
2 pcs. 1/4”-20 Flat Head Machine Screws
2 pcs. N224WO Channel Nuts
17/8”
• Standard finish: ZN
(47.6)
1
• Wt./C 98 Lbs. (44.4 kg) 4 /16”
21/8”
(103.2)

Provided with #10-32 tapped hole for grounding strap
Duplex cover plate included
Receptacle not furnished
Requires ground wire installation for
use with UL listed channel raceway system
• Standard finish: GALV
• Wt./C 72 Lbs. (32.6 kg)
7

41/16”

1 /8”
(47.6)

(103.2)

(54.0)

21/8”
(54.0)

1/2” (15) & 3/4” (20)
Concentric KO’S

1/2” (12.7) x 2” (25.4) Slot
1/2” (15) & 3/4” (20)

1/2” (12.7) x 2” (25.4) Slot

6”

Concentric KO’S

(152.4)

15/8”

B217-20
Closure Strip

(41.3)

4”
(101.6)

END CAPS

A

X TYPE END CAPS

• Material: 12 Gauge (2.6)
• Standard finishes: ZN, GRN

• Material: 12 Gauge (2.6)
• Standard finishes: ZN, GRN, HDG, SS4

Part No.
B203
B204
B205
B206
B220
B221
B222
B223

Use With
B42
B54
B22
B32
B52
B12
B11
B24

Electrical Accessories

B283 THRU B286

B203 THRU B206
B220 THRU B223

1.015”
.827”
1.640”
1.390”
.827”
2.452”
3.265”
1.640”

A

Wt./C

A
(25.8)
(21.0)
(41.6)
(35.3)
(21.0)
(62.3)
(82.9)
(41.6)

Lbs.

kg

6
5
10
8
4
15
20
10

(2.7)

B

(2.2)
(4.5)

Part No.

Use With

B283
B284
B285
B286

B52
B54 & B56
B22
B24 & B26

(3.6)
(1.8)
(6.8)
(9.1)
(4.5)

A
119/32”
119/32”
119/32”
119/32”

B

Wt./C
Lbs. kg

(40.5) 25/32” (19.8)

(2.7)

(40.5) 25/32” (19.8)
(40.5) 119/32” (40.5)

(2.7)

6
6
13
(40.5) 119/32” (40.5) 14

(5.9)
(6.3)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

167

Electrical Accessories
B447

B447A

CONDUIT CONNECTION
PLATE FOR 1/2” (15) CONDUIT

CONDUIT CONNECTION
PLATE FOR 3/4” (20) CONDUIT

• Includes:
2 pcs. 1/4”-20 Flat Head Machine Screws
2 pcs. N224WO Channel Nuts
• Material: 16 Gauge (1.5)
2 Holes
• Standard finish: ZN
9/32” (7.1) Dia.
• Wt./C 35 Lbs. (15.9 kg)

• Includes:
2 pcs. 1/4”-20 Flat Head Machine Screws
2 pcs. N224WO Channel Nuts
• Material: 16 Gauge (1.5)
2 Holes
• Standard finish: ZN
• Wt./C 35 Lbs. (15.9 kg) 9/32” (7.1) Dia.

7/8” (22.2) Dia.

5/8”
(15.9)

13/32” (27.8) Dia.

5/8”
(15.9)

51/8”
(130.2)

51/8”
(130.2)

B392-32 SERIES

B392-22 SERIES

CONNECTION END CAP

CONNECTION END CAP

• Includes:
1 pc. 1/4”-20 Square Nut
1 pc. B436S Fixture Stud Nut
• Material: 11 Gauge (3.0)
• Standard finish: ZN

• Includes:
1 pc. 1/4”-20 Square Nut
1 pc. B436S Fixture Stud Nut
• Material: 11 Gauge (3.0)
15/8”
• Standard finish: ZN
(41.3)

15/8”
(41.3)
9/32” (7.1) Dia.

A Dia.

13/8”

(34.9)

15/8”
(41.3)
9/32” (7.1) Dia.

A Dia.

3/4”
(19.0)

3/4”
(19.0)

Part No.

Wt./C
Part No.

Electrical Accessories

B392-32-1/2
B392-32-3/4

A
7/8”
11/16”

Conduit Size
(22.2)

1/2”

(15)

(27.0)

3/4”

(20)

Lbs.

kg

20
19

(9.1)

B392-22-1/2
B392-22-3/4
B392-22-1

(8.6)

Conduit
Size

A
7/8”

11/16”
1” PIPE THREAD

B392-12 SERIES

B392-11 SERIES

CONNECTION END CAP

CONNECTION END CAP

• Includes:
1 pc. 1/4”-20 Square Nut
1 pc. B436S Fixture Stud Nut
• Material: 11 Gauge (3.0)
• Standard finish: ZN

• Includes:
1 pc. 1/4”-20 Square Nut
1 pc. B436S Fixture Stud Nut
• Material: 11 Gauge (3.0)
• Standard finish: ZN

15/8”
(41.3)
9/32” (7.1) Dia.

27/16”

1/2”

(22.2)
(27.0)

3/4”

1”

kg

21 (9.5)
20 (9.1)
17 (7.7)

15/8”
(41.3)
9/32” (7.1) Dia.

A Dia.

31/4”

(61.9)

(15)
(20)
(25)

Wt./C
Lbs.

A Dia.

(82.5)
3/4”
3/4”
(19.0)

(19.0)

Part No.
B392-12-1/2
B392-12-3/4
B392-12-1

A
7/8”
(22.2)
11/16”
(22.7)
1” PIPE THREAD

Conduit
Size
1/2”
(15)
3/4”
(20)
1”
(25)

Wt./C
Lbs.

kg

27
26
23

(12.2)
(11.8)
(10.4)

Part No.
B392-11-1/2
B392-11-3/4
B392-11-1

A
7/8”
(22.2)
11/16”
(27.0)
1” PIPE THREAD

Wt./C
Conduit
Lbs. kg
Size
1/2”
(15) 36 (16.3)
3/4”
(20) 33 (14.9)
1”
(25) 32 (14.5)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

168

Junction Boxes
B718
UNIVERSAL JUNCTION BOX
• Assemble B719 Hubs into B718 square knockouts
• Designed for use with B22, B24 & B26 Channel
• B718 Includes:
1 pc. Junction Box only
1 pc. Cover only
2 pcs. #10-20 Round Head Machine Screws
• Standard finish: ZN
• Wt./C 180 Lbs. (81.6 kg)

B718-1 B718-2
B718-1
B718-2
B718-2
B718-2
END THRU BOX
90°

B718-3
B718-3
TEE

B718-4
B718-4
CROSS

SELECTION GUIDE

Wt./C
Part No.
B718-1
B718-2
B718-3
B718-4

1
1
1
1

Includes
B718 & 1 B719
B718 & 2 B719
B718 & 3 B719
B718 & 4 B719

Lbs.

205
230
255
280

kg

Box Dimension:
21/2” Deep x 51/8” Square

(93.0)
(104.3)
(115.6)
(127.0)

B719AL
UNIVERSAL JUNCTION BOX HUB
• B719AL Includes:
1 pc. B719AL Hub only
1 pc. B436S Fixture Stud Nut
1 pc. 1/4”-20 Square Nut
2 pcs. #10-24 Self Tapping Screws
2 pcs. Rubber Caps
• Material: Aluminum
• Wt./C 25 Lbs. (11.3 kg)

B518-1 THRU B518-4
UNIVERSAL JUNCTION BOX AND HUBS
• Channel Connection Kits as shown in the chart above
• Includes:
1 pc. Junction Box with Screws
1 pc. Box Cover
• Standard finish: ZN

B518-1
END

B518-2
THRU BOX

B518-2
90°

B518-3
TEE

B518-4
CROSS

Part No.
B518-1
B518-2
B518-3
B518-4

Channel Connection
Kits Included
1
2
3
4

Wt./C
Lbs.

kg

106
137
162
192

(48.1)
(62.1)
(78.5)
(87.1)

CHANNEL CONNECTION KIT
• For use with B22, B24 & B26 Channels.
• Box Dimension: Standard 4” Octagon Box
• Includes:
1 pc. B392-22-3/4 End Connection (See page 160)
1 pc. 3/4” (20) Insulated Chase Nipple
1 pc. 3/4” (20) Lock Nut
• Standard finish: ZN

3/4” (19.1) Conduit
Knockouts

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

169

Electrical Accessories

SELECTION GUIDE

Strut Joiners
B766 SERIES

B767 SERIES

STRAIGHT STRUT JOINER

90° ELBOW STRUT JOINER

• Includes: 2 Cam Screws
• Material: 12 Gauge (2.6)
• Standard finish: ZN

• Includes: 2 Cam Screws
• Material: 12 Gauge (2.6)
• Standard finish: ZN

Note: B767-22
(Cast Aluminum Fitting)

does not require miter
cutting of channel as
shown in drawing.

41/2”
(114.3)
7/8”

25/16”
(58.7)

(22.2)

Wt./C
Part No.
B766-11
B766-12
B766-22 *
B766-26
B766-32
B766-42
B766-52
B766-56

For Channel Size
B11
B12
B22 & B24
B26
B32
B42
B52 & B54
B56

Lbs.

kg

94
72
50
53
44
34
28
31

(42.6)

(58.7)

Wt./C
Part No.
B767-11
B767-12
B767-22 *
B767-26
B767-32
B767-42
B767-52
B767-56

(32.6)
(22.7)
(24.0)
(19.9)
(15.4)
(12.7)
(14.0)

For Channel Size
B11
B12
B22 & B24
B26
B32
B42
B52 & B54
B56

B768 SERIES

B769 SERIES

TEE STRUT JOINER

CROSS STRUT JOINER

•
•
•
•

•
•
•
•

Includes: 3 Cam Screws
Patented
Material: 12 Gauge (2.6)
Standard finish: ZN

25/16”

Lbs.

kg

74
56
39
41
34
27
23
25

(33.5)
(17.7)
(18.6)
(15.4)
(12.2)
(10.4)
(11.3)

Includes: 4 Cam Screws
Patented
Material: 12 Gauge (2.6)
Standard finish: ZN

41/2”
(114.3)

41/2”
(114.3)

Electrical Accessories

(25.4)

31/16”
(77.8)

41/2”
(114.3)
Wt./C
Part No.
B768-11
B768-12
B768-22 *
B768-26
B768-32
B768-42
B768-52
B768-56

For Channel Size
B11
B12
B22 & B24
B26
B32
B42
B52 & B54
B56

Lbs.

kg

142
112
79
79
72
62
57
60

(64.4)

Wt./C
Part No.
B769-11
B769-12
B769-22 *
B769-26
B769-32
B769-42
B769-52
B769-56

(50.8)
(35.8)
(35.8)
(32.6)
(28.1)
(25.8)
(27.2)

For Channel Size
B11
B12
B22 & B24
B26
B32
B42
B52 & B54
B56

Lbs.

kg

148
120
87
93
78
65
58
62

(67.1)
(54.4)
(39.4)
(42.2)
(35.4)
(29.5)
(26.3)
(28.1)

* Cast Aluminum parts
Note: Strut joiners are not for structural support. A channel support is recommended within 24” (609 mm) of each joint.
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

170

Strut Joiners
B166

B166-46

71/4”
(184.1)

FOUR HOLE
SPLICE CLEVIS

FOUR HOLE
SPLICE CLEVIS ASSEMBLY

•Includes:
1 Splice Clevis
4 pcs. 1/4”-20 Flat Head
Machine Screws
4 pcs. N224WO Channel Nuts
•Material: 16 Gauge

• Requires ground wire for use with
UL listed channel raceway system
• Includes:
1 Splice Clevis
1 pc. B466W tapped plate
4 pcs. 1/4”-20 Flat Head Machine Screws
• Material: 16 Gauge (1.5)
• Standard finishes: ZN, GRN

A
111/16”
(42.9)

Wt./C
Part No.

A
31/4”
27/16”
15/8”
13/8”
1”
13/16”

B166-11
B166-12
B166-22
B166-32
B166-42
B166-52

(82.5)
(61.9)
(41.3)
(34.9)
(25.4)
(20.6)

71/4”
(184.1)

For Channel Size

Lbs.

kg

B11
B12
B22, B24, B26
B32
B42
B52, B54, B56

128
108
91
83
75
71

(58.0)

Part No.

(49.0)
(40.3)
(37.6)
(34.0)
(32.2)

B166-46-11
B166-46-12
B166-46-22
B166-46-32
B166-46-42
B166-46-52

111/16”
(42.9)

Wt./C
For Channel Size Lbs. kg

A
31/4”
27/16”
15/8”
13/8”
1”
13/16”

A

(82.5)
(61.9)
(41.3)
(34.9)
(25.4)
(20.6)

B11
B12
B22, B24, B26
B32
B42
B52, B54, B56

118
98
79
73
65
61

(53.5)
(44.4)
(35.8)
(33.1)
(29.5)
(27.6)

B166CL

B466W

B466S

SPLICE CLEVIS CLIP

TAPPED SPLICE PLATE

STUD SPLICE PLATE

•
•
•
•

• Includes:
4 pcs. 1/4”-20 Flat Head Machine
Screws
• Material: 14 Gauge (1.9)
• Standard finish: ZN
• Wt./C 27 Lbs. (12.2 kg)
• Holes 13/16” (20.6) from ends and
17/8” (47.6) on centers

• Includes:
4 pcs. 1/4”-20 Square Nuts
• Material: 14 Gauge (1.9)
• Standard finish: ZN
• Wt./C 34 Lbs. (15.4 kg)
• Studs 13/16” (20.6) from ends and
17/8” (47.6) on centers

B393-1

B589

WIRING STUD

SPACER CLEVIS

• Requires ground wire for use with
UL listed channel raceway system
• 1/2” (15) pipe threads
• Material: Cast Aluminum
• Wt./C 6 Lbs. (2.7 kg)

•
•
•
•

Use to cover gap between strut
Material: 18 Gauge (1.2)
Standard finish: ZN
Wt./C 4 Lbs. (1.8 kg)

B166

1”
(25.4)

125/32”
(45.2)

B619
• Requires ground wire for use with UL
listed channel raceway system
• Includes:
2 pcs. 1/4”-20 Flat Head Machine
Screws
2 pcs. N224WO Channel Nuts
• Material: 16 Gauge (1.5)
1/2” (15) Conduit Knockouts
• Standard finish: ZN
• Wt./C 40 Lbs. (18.1 kg)

61/4”
(158.7)

Can be used with B393-1 wiring stud
Material: 12 Gauge (2.6)
Standard finish: ZN
Wt./C 29 Lbs. (13.1 kg)

9/32” (7.1) Dia.
Holes

2”

1/2” (15) Pipe

7/8” (22.2) Dia.

Threads

(50.8)

4”
(101.6)

11/8”
(28.6)

121/32”
(42.0)

1/2”
(12.7)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

171

Electrical Accessories

KNOCK-OUT PLATE

Electrical Hardware
B446B

B446A

SWIVEL HANGER (MALE ONLY)

SWIVEL HANGER (FEMALE ONLY)

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN
A

13/4”
(44.4)

R

R

13/4”
(44.4)

B
Wt./C

Part No.

B

R

Lbs.

B446B-3/8

3/8”-16

9/32”

(7.1)

B446B-1/2
B446B-5/8
B446B-3/4

1/2”-13

3/8”

(9.5)

15/32”

(11.9)

9/16”

(14.3)

HHCS
HHCS
5/8”-11 HHCS
3/4”-10 HHCS

Wt./C
Part No.

kg

16
20
42
60

A

R

(7.2)

B446A-3/8

3/8”-16

9/32”

(7.1)

(9.1)

B446A-1/2
B446A-5/8
B446A-3/4

1/2”-13

3/8”

(9.5)

15/32”

(11.9)

9/16”

(14.3)

(19.0)
(27.2)

HN
HN
5/8”-11 HN
3/4”-10 HN

B446

B446C

SWIVEL HANGER (FEMALE-MALE)

SWIVEL HANGER (FEMALE-FEMALE)

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
• Safety Factor of 3
• Standard finish: ZN

23/4”
(69.8)

Lbs.

kg

13
15
34
45

(5.9)
(6.8)
(15.4)
(20.4)

23/4”
(69.8)

A

A
1”
Electrical Accessories

(25.4)

A

B
Wt./C

Wt./C
Part No.
B446-3/8
B446-1/2
B446-5/8
B446-3/4

A
3/8”-16

HN
1/2”-13 HN
5/8”-11 HN
3/4”-10 HN

B
3/8”-16

HHCS
1/2”-13 HHCS
5/8”-11 HHCS
3/4”-10 HHCS

Lbs.

kg

28
36
78
112

(12.7)

Part No.
B446C-3/8
B446C-1/2
B446C-5/8
B446C-3/4

(16.3)
(35.4)
(50.8)

A
3/8”-16

HN
1/2”-13 HN
5/8”-11 HN
3/4”-10 HN

B590

B617

FIBER WIRE RETAINER

SHOULDER BOLT

• Installation aid for retaining wires before
installing snap closure strip
• Wt./C 1 Lb. (.4 kg)

• Standard finish: ZN
• Wt./C 6 Lbs. (2.7 kg)

13/8”
(34.9)

11/2”

Lbs.

kg

26
31
68
90

(11.8)
(14.0)
(30.8)
(40.8)

2”

(38.1)

(50.8)

1/32”

3/8”-16 Thread Size

(.8)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

172

Insulclamp™ Clamps
B4060 THRU B4093
INSULCLAMP CABLE CLAMPS (Replaces porcelain clamps)
• Assembly includes:
1 Insulclamp & 1 pr. zinc plated Pipe Straps with Everdur (Silicon Bronze) Hardware
• The thermoplastic elastomer Insulclamp has a dielectric strength of 640 volts/mil
• The flame retardant one piece design allows for trouble free assembly
• Everdur hardware is non-ferrous and prevents magnetic induction
Hole Dia.

A

B

Part No.

3/8”

(9.5)

1/2”

(12.7)

5/8”

(15.9)

3/4”

(19.0)

7/8”

(22.2)

1”
11/8”
11/4”
13/8”
11/2”
15/8”
13/4”
17/8”
2”
21/8”
21/4”
23/8”
21/2”
25/8”
23/4”
27/8”
3”
31/8”
31/4”
33/8”
31/2”
35/8”
33/4”
37/8”
4”
41/8”
41/4”
43/8”
41/2”

(25.4)
(28.6)
(31.7)
(34.9)
(38.1)
(41.3)
(44.4)
(47.6)
(50.8)
(54.0)
(57.1)
(60.3)
(63.5)
(66.7)
(69.8)
(73.0)
(76.2)
(79.4)
(82.5)
(85.7)
(88.9)
(92.1)
(95.2)
(98.4)
(101.6)
(104.8)
(107.9)
(111.1)
(114.3)

Wt./C
Lbs.
kg
25
25
25
37
37
37
37
58
58
58
58
76
76
76
76
90
90
90
90
109
109
109
109
130
130
130
130
160
160
160
160
160
160
160

A

Includes
Clamp No.

B

(11.3)
(11.3)

1.36”

(34.5)

.56”

(14.2)

B2030

1.86”

(47.2)

.81”

(20.8)

B2011

2.36”

(59.9)

1.06”

(26.9)

B2038

2.86”

(72.6)

1.31”

(33.3)

B2042

3.36”

(85.3)

1.56”

(39.6)

B2046

3.86”

(98.0)

1.81”

(46.0)

B2050

4.36”

(110.7)

2.06”

(52.3)

B2054

4.86”

(123.4)

2.31”

(58.7)

B2058

5.24”

(133.1)

2.50”

(63.5)

B2018

(11.3)
(16.8)
(16.8)
(16.8)
(16.8)
(26.3)
(26.3)
(26.3)
(26.3)
(34.5)
(34.5)
(34.5)
(34.5)
(40.8)
(40.8)
(40.8)
(40.8)
(49.4)
(49.4)
(49.4)
(49.4)
(58.9)
(58.9)
(58.9)
(58.9)
(72.6)
(72.6)
(72.6)
(72.6)
(72.6)
(72.6)
(72.6)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

173

Electrical Accessories

B4060
B4061
B4062
B4063
B4064
B4065
B4066
B4067
B4068
B4069
B4070
B4071
B4072
B4073
B4074
B4075
B4076
B4077
B4078
B4079
B4080
B4081
B4082
B4083
B4084
B4085
B4086
B4087
B4088
B4089
B4090
B4091
B4092
B4093

Hole Dia.

Porcelain & Maple Clamps
B4050 & B4051

B4094 & B4095

PORCELAIN CABLE
CHANNEL SADDLE

PORCELAIN CABLE
RACK SADDLE

• Electrical porcelain has an
dielectric strength of
50 volts/mil

• Electrical porcelain has an
dielectric strength of 50 volts/mil
• Designed for use with
B449 Brackets
x

R

x

A

A

3”

21/4”

(76.2)

(57.1)

Wt./C

Wt./C
Part No.

A
3”
4”

B4050
B4051

R

R

Lbs.

Part No.

kg

(76.2)

13/8”

(34.9)

(101.6)

21/8”

(54.0) 100 (45.3)

72

A

B4094
B4095

(32.6)

R

27/8”

(73.0)

37/8”

(98.4)

Lbs.

13/8”

(34.9) 67 (30.4)
21/8” (54.0) 106 (48.1)

B4037B 1/4” (6.3) x 4” (101.6)

B4035A THRU B4035F
4” (101.6) BUS BAR
MAPLE CLAMPS

BUS BAR SEPARATOR
• Wt./C 9 Lbs. (4.1 kg)

• Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated)
3 pcs. 1/2” Flat Washers
3 pcs. N225WO
3 pcs. SQN-1/2”
3 pcs. ATR-1/2 x L (Length)
• Required number of Separators
• 1/4” (6.3) x 2” (50.8) and 1/4” (6.3) x 6” (152.4)
Bus Bar Maple Clamps available

47/16”
(112.7)

15/8”

Electrical Accessories

(41.3)

A

31/2”
(88.9)
1/4”
(6.3)

C
B

Part No.
B4035A
B4035B
B4035C
B4035D
B4035E
B4035F

A

73/8”

B

(187.3)

81/2”
91/2”
101/2”
111/2”
121/2”
131/2”

C
(215.9)

1/4”

(6.3)

(241.3)

3/4”

(19.0)

(266.7)

11/4”
13/4”
21/4”
23/4”

(31.7)

(292.1)
(317.5)
(342.9)

(44.4)
(57.1)
(69.8)

No. of Bus
Separators

No. of Bars
Per Leg

Lbs.

Wt./C
kg

–
2
4
6
8
10

1
2
3
4
5
6

416
447
479
511
542
574

(188.7)
(202.7)
(217.3)
(231.8)
(245.8)
(260.3)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

174

kg

Maple Clamps
B4000 THRU B4007
MAPLE CABLE CLAMPS
• Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated)
1 pr. zinc plated Steel Pipe Straps with Everdur Hardware (Silicon Bronze)
• Everdur hardware is non-ferrous and prevents magnetic induction

Specify Hole Dia.

Note: Maple cable clamps may be replaced with Insulclamps™ see page 173 for sizes

Part No.
B4000
B4001
B4002
B4003
B4004
B4005
B4006
B4007

Specify Hole Dia.
0” to 5/8” (0.0 to 15.9)
1/2” to 1” (12.7 to 25.4)
3/4” to 11/2” (19.0 to 38.1)
11/4” to 13/4” (31.7 to 44.4)
11/2” to 21/4” (38.1 to 57.1)
2” to 21/2” (50.8 to 63.5)
21/4” to 3” (38.1 to 76.2)
3” to 4” (76.2 to 101.6)

A

Clamp No.
Wt./C
(included) Lbs. kg

B

111/32” (34.1)
2”
(50.8)
129/32” (48.4) 225/32” (70.6)
23/8”
(60.3) 39/32” (83.3)
27/8”
(73.0) 33/4” (95.2)
1
3 /2”
(88.9) 43/8” (111.1)
4”
(101.6) 47/8” (123.8)
41/2” (114.3) 53/8” (136.5)
59/16” (141.3) 67/16” (163.5)

B2010
B2012
B2013
B2014
B2015
B2016
B2017
B2019

24
44
58
66
86
110
125
165

(10.9)
(19.9)
(26.3)
(29.9)
(39.0)
(49.9)
(56.7)
(74.8)

B

A

Specify Hole Dia.

B4008 THRU B4017
SQUARE MAPLE CABLE SADDLE
• Assembly Includes:
1 Maple Saddle (Paraffin Impregnated)
1 pc. 3/8”-16 Flat Head Machine Screw
1 pc. N228 Channel Nut
• Other sizes available

15/8”
(41.3)

Specify
Hole Dia.

Part No.
B4008
B4009
B4010
B4011
B4012
B4013
B4014
B4015
B4016
B4017

B

0” to 1”
1” to 11/2”
11/2” to 2”
2” to 21/2”
21/2” to 3”
3” to 31/2”
31/2” to 4”
4” to 41/2”
41/2” to 5”
5” to 6”

(0.0 to 25.4)
(25.4 to 38.1)
(38.1 to 50.8)
(50.8 to 63.5)
(63.5 to 76.2)
(76.2 to 88.9)
(88.9 to 101.6)
(101.6 to 114.3)
(114.3 to 127.0)
(127.0 to 152.4)

A

Wt./C
A
3”
31/2”
4”
41/2”
5”
51/2”
6”
7”
71/2”
9”

B

(76.2)
(88.9)
(101.6)
(114.3)
(127.0)
(139.7)
(152.4)
(177.8)
(190.5)
(228.6)

Lbs.

13/4” (44.4) 35
(50.8)
2”
42
21/4” (57.1) 53
21/2” (63.5) 62
23/4” (69.8) 76
(76.2)
3”
85
31/4” (82.5) 95
33/4” (95.2) 105
4” (101.6) 115
5” (127.0) 126

kg
(15.9)
(19.0)
(24.0)
(28.1)
(34.5)
(38.5)
(43.1)
(47.8)
(52.4)
(57.1)

15/8”
(41.3)

MAPLE CABLE CLAMPS
• Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated)
2 pcs. 3/8”-16 Stud Bolts
2 pcs. 3/8”-16 Flat Washers
2 pcs. 3/8”-16 Square Nuts
2 pcs. N228 Channel Nuts
• Other sizes available

Part No.
B4033A
B4033B
B4033C
B4033D
B4033E
B4033F
B4033G
B4033H
B4033I

A

Specify
Hole Dia.
0” to 1”
1” to 11/2”
11/2 to 2”
2” to 21/2”
21/2” to 3”
3” to 31/2”
31/2” to 4”
4” to 41/2”
41/2” to 5”

(0.0 to 25.4)
(25.4 to 38.1)
(38.1 to 50.8)
(50.8 to 63.5)
(63.5 to 76.2)
(76.2 to 88.9)
(88.9 to 101.6)
(101.6 to 114.3)
(114.3 to 127.0)

Specify
Hole Dia.

Wt./C
A
31/2”
4”
41/2”
51/2”
6”
61/2”
7”
71/2”
8”

Lbs.
(88.9)
(101.6)
(114.3)
(127.0)
(152.4)
(165.1)
(177.8)
(190.5)
(203.2)

85
95
118
162
187
209
248
270
298

kg

A

(38.5)
(43.1)
(53.5)
(73.5)
(84.8)
(94.8)
(112.5)
(122.5)
(135.2)

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

175

Electrical Accessories

B4033A THRU B4033I

Aluminum & Stainless Steel
Alum. & Stainless Steel Materials

Aluminum
Aluminum channels, fittings and accessories offer
excellent corrosion resistance and are suitable for
many indoor and outdoor applications. Aluminum’s
high strength to weight ratio greatly reduces
overall cost of installation through ease of
handling and cutting. Cooper B-Line’s channels
are extruded from aluminum alloy 6063-T6.
Closure strips are extruded from aluminum alloy
6063-T5. Fittings and accessories are made from
aluminum alloy 5052-H32.

Stainless Steel
Where corrosion problems persist and other
material and fittings are ineffective, we
recommend use of Cooper B-Line’s corrosion
resistant stainless steel channels and
accessories. Channels and fittings are available
in two types of stainless steel:
SS4-AISI Type 304
SS6-AISI Type 316

Fittings
Most fittings, as shown in this catalog, can be
supplied in aluminum or stainless steel.
Consult factory for possible minimum production
quantities and set-up charges.

Load Data
Aluminum
Channel’s approximate load data can be
determined by multiplying load data in the
steel channel section of this catalog by a
factor of 0.38.

Stainless Steel
Channel load data is the same as the data
in the steel channel section of this catalog.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

176

Aluminum Channel & Closure Strips
B12AL

B22AL

• Thickness: .105 (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: Aluminum
• Weight: 1.06 Lbs./Ft. (1.58 kg/m)

• Thickness: .105 (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: Aluminum
• Weight: .86 Lbs./Ft. (1.28 kg/m)

• Thickness: .105 (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: Aluminum
• Weight: .66 Lbs./Ft. (0.98 kg/m)

31/4”
(82.5)

27/16”

15/8”
(41.3)

(61.9)

15/8”
(41.3)

15/8”
(41.3)

15/8”
(41.3)

B22AAL

B24AL

• Thickness: .105 (2.6 mm)
• Standard Length: 10’ (3.05 m) and 20’ (6.09 m)
• Material: Aluminum
• Weight: 1.18 Lbs./Ft. (1.75 kg/m)

• Thickness: .080 (2.0 mm)
• Standard Length: 10’ (3.05 m) and 20’ (6.09 m)
• Material: Aluminum
• Weight: .52 Lbs./Ft. (0.77 kg/m)

31/4”
(82.5)

15/8”
(41.3)

15/8”
(41.3)

15/8”
(41.3)

B54AL

B54AAL

• Thickness: .080 (2.0 mm)
• Standard Length: 10’ (3.05 m) and 20’ (6.09 m)
• Material: Aluminum
• Weight: .37 Lbs./Ft. (0.55 kg/m)

• Thickness: .080 (2.0 mm)
• Standard Length: 10’ (3.05 m) and 20’ (6.09 m)
• Material: Aluminum
• Weight: .57 Lbs./Ft. (0.84 kg/m)

13/16”

15/8”
(41.3)

(20.6)

15/8”
(41.3)

15/8”
(41.3)

B217AL

B217P

B217FFAL

CLOSURE STRIP

PLASTIC CLOSURE STRIP

CLOSURE STRIP

• Standard Length: 10’ (304.8 cm)
• Material: Aluminum
• Weight: .15 Lbs./Ft. (0.23 kg/m)

• Standard Length: 10’ (304.8 cm)
• Material: PVC
• Weight: .09 Lbs./Ft. (0.14 kg/m)

• Standard Length: 10’ (304.8 cm)
• Material: Aluminum
• Weight: .16 Lbs./Ft. (0.24 kg/m)

17/16”
(36.5)

5/8”
(15.9)

21/2”
(63.5)

17/16”
(36.5)

Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.

177

Alum. & Stainless Steel Materials

B11AL

Alum. & Stainless Steel Materials

Aluminum
SH TYPE CHANNEL

KO6 TYPE KNOCKOUT CHANNEL

• Material: Aluminum

• Material: Aluminum

6”

2”

TYP.
(50.8)

(152.4)
9/16” x 11/8” Slots
(14.2) (28.6)

3”
(76.2)
7/8” (22.2) Dia. KO

H
H

Wt./C

Wt./C
Part No.
B12SH AL
B22SH AL
B24SH AL
B54SH AL

Thickness
.105
.105
.080
.080

(2.6)
(2.6)
(2.0)
(2.0)

H
27/16”
15/8”
15/8”
13/16”

Lbs./Ft. kg/m
(61.9)
(41.3)
(41.3)
(20.6)

.83
.63
.49
.34

(1.23)
(.93)
(.73)
(.50)

Part No.

Thickness

B12KO6 AL
B22KO6 AL
B24KO6 AL
B54KO6 AL

.105
.105
.080
.080

H

Lbs./Ft. kg/m

(2.6)

27/16”

(2.6)

15/8” (41.3)
15/8” (41.3)
13/16” (20.6)

(2.0)
(2.0)

H-17/8 TYPE CHANNEL

B2000 SERIES

• Material: Aluminum

RIGID CONDUIT CLAMPS

.86
.66
.52
.37

(61.9)

(1.28)
(.98)
(.77)
(.55)

• Safety Factor of 5
• Machine Screw and Square Nut included
• Pipe clamp material 5052-H32
Design Load

17/8”

Typ.
(47.6)

9/16” (14.2) Dia. Holes

H

Wt./C
Part No.
B12H17/8 AL
B22H17/8 AL
B24H17/8 AL
B54H17/8 AL

Thickness
.105
.105
.080
.080

H

(2.6) 27/16” (61.9)

15/8” (41.3)
(2.0) 15/8” (41.3)
(2.0) 13/16” (20.6)
(2.6)

Lbs./Ft. kg/m

.86
.66
.52
.37

(1.28)
(.98)
(.77)
(.55)

Part No.
B2001 AL
B2008 AL
B2009 AL
B2010 AL
B2011 AL
B2012 AL
B2013 AL
B2014 AL
B2015 AL
B2016 AL
B2017 AL
B2018 AL
B2019 AL
B2020 AL

Conduit or
Pipe Size
3/8” (10)
1/2” (15)
3/4” (20)
1” (25)
11/4” (32)
11/2” (40)
2” (50)
21/2” (65)
3” (80)
31/2” (90)
4” (100)
1
4 /2” (115)
5” (125)
6” (150)

Material
Thickness
.063 (1.6)
.063 (1.6)
.080 (2.0)
.080 (2.0)
.080 (2.0)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.125 (3.2)
.125 (3.2)
.125 (3.2)
.125 (3.2)
.125 (3.2)

Design Load

Wt./C

Lbs.

kN

Lbs.

kg

180
180
270
270
270
360
360
360
360
450
450
450
450
450

(.80)

4
4
6
7
8
11
12
13
16
22
24
26
27
33

(1.8)

(.80)
(1.20)
(1.20)
(1.20)
(1.60)
(1.60)
(1.60)
(1.60)
(2.00)
(2.00)
(2.00)
(2.00)
(2.00)

(1.8)
(2.7)
(3.2)
(3.6)
(5.0)
(5.4)
(5.9)
(7.2)
(10.0)
(10.9)
(11.8)
(12.2)
(14.9)

Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.

178

Aluminum
Most fittings, as shown in this catalog, can be supplied in aluminum. See “Fittings” section (page 72) of this catalog.
Consult factory for possible minimum production quantities and set-up charges.

CHANNEL NUTS
B-Line recommends the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength
and slip resistance, use the channel nut information provided on pg. 50 & 51. A (.70) multiplier is to be applied to
obtain the appropriate derated values for aluminum channel.

NUT WITHOUT SPRING

SPRING NUT

NUTS FOR B12 CHANNEL
With
Spring
N724SS6
N728SS6
N725SS6

Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6

Thread
Size

Wt./C
Thickness

1/4”-20

1/4”

(6.3)

3/8”-16

3/8”

(9.5)

1/2”-13

3/8”

(9.5)

Lbs.

kg

6.6
10.6
9.7

(3.0)
(4.8)
(4.4)

NUTS FOR B22, B24 CHANNELS
With
Spring
N224SS6
N228SS6
N225SS6

Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6

Thread
Size

Wt./C
Thickness

1/4”-20

1/4”

(6.3)

3/8”-16

3/8”

(9.5)

1/2”-13

3/8”

(9.5)

Lbs.

kg

6.6
10.6
9.7

(3.0)
(4.8)
(4.4)

NUTS FOR B54 CHANNEL
With
Spring
N524SS6
N528SS6
N525SS6

Part Number
Without
Spring
N224WOSS6
N228WOSS6
N525WOSS6

Thread
Size

Wt./C
Thickness

1/4”-20

1/4”

(6.3)

3/8”-16

3/8”

(9.5)

1/2”-13

3/8”

(9.5)

Lbs.

kg

6.6
10.6
9.7

(3.0)
(4.8)
(4.4)

Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.

179

Alum. & Stainless Steel Materials

ALUMINUM FITTINGS

Stainless Steel
Alum. & Stainless Steel Materials

B22SS*

B24SS*

• *Substitute 4 for Stainless Steel
Type 304 or 6 for Stainless Steel
Type 316
• Thickness: 12 Ga. (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: SS4, SS6
• Weight: 1.90 Lbs./Ft. (2.83 kg/m)

15/8”
(41.3)

• *Substitute 4 for Stainless Steel
Type 304 or 6 for Stainless Steel
Type 316
• Thickness: 14 Ga. (1.9 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: SS4, SS6
• Weight: 1.40 Lbs./Ft. (2.08 kg/m)

15/8”
(41.3)

15/8”
(41.3)

15/8”
(41.3)

B32SS4

B42SS4

• Thickness: 12 Ga. (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: SS4
• Weight: 1.70 Lbs./Ft. (2.53 kg/m)

13/8”
(34.9)

• Thickness: 12 Ga. (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: SS4
• Weight: 1.44 Lbs./Ft. (2.14 kg/m)

1”
(25.4)

15/8”
(41.3)

15/8”
(41.3)

B54SS*
• *Substitute 4 for Stainless Steel
Type 304 or 6 for Stainless Steel
Type 316
• Thickness: 14 Ga. (1.9 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: SS4, SS6
• Weight: .97 Lbs./Ft. (1.44 kg/m)

13/16”
(20.6)

15/8”
(41.3)

SH TYPE CHANNEL

H-17/8 TYPE CHANNEL

2”

TYP.
(50.8)
9/16” x 7/8” Slots

17/8”

TYP.
(47.6)

(14.2) (22.2)

H

9/16” (14.2) Dia. Holes

H
Wt./C
Part No.
B22SH SS4
B22SH SS6
B24SH SS4
B24SH SS6
B32SH SS4
B42SH SS4
B54SH SS4
B54SH SS6

Thickness
12 Ga.
12 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
14 Ga.
14 Ga.

(2.6)
(2.6)
(1.9)
(1.9)
(2.6)
(2.6)
(1.9)
(1.9)

H
15/8” (41.3)
15/8” (41.3)
15/8” (41.3)
15/8” (41.3)
13/8” (34.9)
1”
(25.4)
13/16” (20.6)
13/16” (20.6)

Lbs./Ft. kg/m

1.82
1.82
1.34
1.34
1.62
1.36
.91
.91

(2.70)

(2.70)
(1.99)
(1.99)
(2.41)
(2.02)
(1.35)
(1.35)

Wt./C
Part No.
B22H17/8 SS4
B24H17/8 SS4
B24H17/8 SS6
B32H17/8 SS4
B42H17/8 SS4
B54H17/8 SS4
B54H17/8 SS6

Thickness
12 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
14 Ga.
14 Ga.

H

(2.6) 15/8” (41.3)
(1.9) 15/8” (41.3)
(1.9) 15/8” (41.3)
(2.6) 13/8” (34.9)

1” (25.4)
(1.9) 13/16” (20.6)
(1.9) 13/16” (20.6)
(2.6)

Lbs./Ft. kg/m

1.85
1.36
1.36
1.65
1.39
.93
.93

(2.75)
(2.02)
(2.02)
(2.45)
(2.07)
(1.38)
(1.38)

Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.

180

Stainless Steel
Alum. & Stainless Steel Materials

STAINLESS STEEL FITTINGS
Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See “Fittings”
section (page 72) of this catalog.
Consult factory for possible minimum production quantities and set-up charges.

B2000 SERIES
PIPE AND TUBING CLAMPS
• Safety Factor of 5
• Combination Recess Hex Head Machine Screw and Square Nut included
• Material: Stainless Steel Type 304 & 316
Design Load

Part No.
B2001 SS4
B2008 SS4
B2009 SS4
B2010 SS4
B2011 SS4
B2012 SS4
B2013 SS4
B2014 SS4
B2015 SS4
B2016 SS4
B2017 SS4
B2018 SS4
B2019 SS4
B2020 SS4

Conduit
Pipe Size
3/8” (10)
1/2” (15)
3/4” (20)
1” (25)
11/4” (32)
11/2” (40)
2” (50)
21/2” (65)
3” (80)
31/2” (90)
4” (100)
41/2” (115)
5” (125)
6” (150)

Material Design Load
Lbs.
kN
Thickness
16 Ga. (1.5) 400 (1.78)
16 Ga. (1.5) 400 (1.78)
14 Ga. (1.9) 600 (2.67)
14 Ga. (1.9) 600 (2.67)
14 Ga. (1.9) 600 (2.67)
12 Ga. (2.6) 800 (3.56)
12 Ga. (2.6) 800 (3.56)
12 Ga. (2.6) 800 (3.56)
12 Ga. (2.6) 800 (3.56)
12 Ga. (2.6) 1000 (4.45)
12 Ga. (2.6) 1000 (4.45)
12 Ga. (2.6) 1000 (4.45)
12 Ga. (2.6) 1000 (4.45)
12 Ga. (2.6) 1000 (4.45)

Wt./C
Lbs.

10
11
15
16
20
30
34
38
44
51
55
59
64
80

kg
(4.5)
(5.0)
(6.8)
(7.2)
(9.1)
(13.6)
(15.4)
(17.2)
(19.9)
(23.1)
(24.9)
(26.7)
(29.0)
(36.3)

CHANNEL NUTS
• For Channel Nuts pull-out strength and slip resistance, use the data
shown in “Channel Nuts & Hardware” section of this catalog.
Note: Reduce slip load by 50% due to hardness of material.

SPRING NUT

NUT WITHOUT SPRING

NUTS FOR B22, B24, B32 CHANNELS
With
Spring
N224SS6
N228SS6
N225SS6

Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6

Wt./C

Thread
Size

Thickness

1/4”-20

1/4”

(6.3)

3/8”-16

3/8”

(9.5)

1/2”-13

3/8”

(9.5)

Lbs.

kg

6.6
10.6
9.7

(3.0)
(4.8)
(4.4)

NUTS FOR B42, B52, B54 CHANNELS
With
Spring
N524SS6
N528SS6
N525SS6

Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6

Thread
Size

Wt./C
Thickness

1/4”-20

1/4”

(6.3)

3/8”-16

3/8”

(9.5)

1/2”-13

3/8”

(9.5)

Lbs.

kg

6.6
10.6
9.7

(3.0)
(4.8)
(4.4)

Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.

181

Fiberglass
Cooper B-Line offers two fire retardant (FR) resins
for strut systems, polyester and vinyl ester. Both
resins are ideal for corrosive environments.
While polyester is sufficient for most uses,
vinyl ester is suitable for a broader range of
environments.
Please refer to the "Corrosion Resistance Guide"
for specific applications, page 183.

Fiberglass Materials

Materials & Finishes
Cooper B-Line Fiberglass Strut systems are
manufactured from glass fiber-reinforced plastic
shapes that meet ASTM E-84, Class 1 Flame
Rating and self-extinguishing requirements of
ASTM D-635. A surface veil is applied during
pultrusion to insure a resin-rich surface and
ultraviolet resistance.

Fittings
The following dimensions apply to all fittings
except as noted on the drawings:
Hole Size–13/32” (10.3 mm) Dia.
Hole Spacing–13/16” (20.6 mm) from end and
17/8” (47.6 mm) on center.
Width–15/8” (41.3 mm)
Thickness–1/4” (6.3 mm)

Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in
millimeters.

182

Fiberglass
CHANNEL RESIN INFORMATION
Cooper B-Line offers two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are
ideal for corrosive environments.
While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments.
Please refer to the "Corrosion Resistance Guide" below for specific applications.
Corrosion Resistance Guide
160°F (71°C)
BFP/BFV
BFV-150° **
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFV
BFV-120° **
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFV
BFP/BFV
BFP/BFV
BFV
BFV-120° **
BFP/BFV
BFV-120° **
BFP/BFV
BFP/BFV
BFP/BFV
BFV-210° **
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFV
BFV
BFV
BFV-180° **
BFP/BFV
BFV-210° **
BFV
BFV-210° **
BFP/BFV
BFP/BFV
to exceed this temperature

Information contained in this chart is based on data from raw material suppliers.
Temperatures are not the minimum nor the maximum (except where specifically stated) but represent standard test
conditions. The products may be suitable at higher temperatures but individual test data should be required to
establish suitability.
The recommendations or suggestions contained in this chart are made without guarantee or representation as to results.
We suggest that you evaluate the recommendations and suggestions in your own laboratory or actual field trial prior to use.

Recommended Guideline:

Flame Retardant Properties

Temperature

Design Load Multiplier

75°F (24°C)

100%

100°F (38°C)

90%

125°F (52°C)

78%

150°F (66°C)

68%

175°F (79°C)

60%

200°F (93°C)

52%

BFP

Flame Resistance (FTMS 406-2023)
ign/burn, seconds
75/75
Intermittent Flame Test (HLT-15), rating
100
Flammability Test (ASTM D635)
Ignition
none
Burning Time
0 sec.
Surface Burning Characteristics (ASTM E84),
25
Flame spread index
UL 94 Flame Class
V-0

Reference page 182 for general fitting specifications.

183

BFV
75/75
100
none
0 sec.
25
V-0

Fiberglass Materials

Chemicals
70°F (21°C)
160°F (71°C)
Chemicals
70°F (21°C)
Acetic acid 5%
BFP/BFV
BFP/BFV
Methyl alcohol 10%
Acetic acid 52%
BFP/BFV
BFV-210° **
Naphtha
Aluminum potassium sulfate 5% BFP/BFV
BFP/BFV
Nitric acid 5%
Ammonium hydroxide 10%
BFP/BFV
BFV-150° **
Nitric acid 20%
Ammonium nitrate
BFP/BFV
BFP/BFV
Phosphoric acid 10%
Benzene sulfonic acid 5%
BFP/BFV
BFP/BFV
Phosphoric acid 30%
Calcium chloride
BFP/BFV
BFP/BFV
Phosphoric acid 85%
Carbon tetrachloride
BFV
BFV-100° **
Sodium bicarbonate 10%
Chlorine dioxide 15%
BFP/BFV
BFV-150° **
Sodium bisulfate
Chromic acid 5%
BFV
BFV-150° **
Sodium carbonate
Copper sulfate
BFP/BFV
BFP/BFV
Sodium chloride
Diesel fuel
BFP/BFV
BFV
Sodium hydroxide 1-50%
Ethylene glycol
BFP/BFV
BFP/BFV
Sodium hypochlorite 5%
Fatty acids 100%
BFP/BFV
BFP/BFV
Sodium nitrate
Ferrous sulfate
BFP/BFV
BFP/BFV
Sodium silicate
Fluosilicic acid 0-20%
BFV
BFV
Sodium sulfate
Gasoline
BFP/BFV
BFV
Sulfuric acid 0-30%
Hydrochloric acid 1%
BFP/BFV
BFP/BFV
Sulfuric acid 30-50%
Hydrochloric acid 15%
BFP/BFV
BFV-180° **
Sulfuric acid 50-70%
Hydrochloric acid 37%
BFP/BFV
BFV-150° **
Trisodium phosphate 25%
Kerosene
BFP/BFV
BFP/BFV
Trisodium phosphate-All
Magnesium chloride
BFP/BFV
BFP/BFV
Water, Distilled
BFP - BFP parts recommended
BFV - BFV parts recommended
** - Not recommended

Fiberglass
BFP22 THRU BFV22SH
• Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
• Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.

BFP22H17/8

Fiberglass Materials

BFP22
BFV22
Solid Back

Part No.

BFV22SH
(14.3) x 7/8” (22.2) slots
2” (50.8) on centers

9/16”

9/16”

(14.3) holes
17/8” (47.6) on centers

Material

BFP22*
BFV22*
BFP22H17/8*
BFV22H17/8*
BFP22SH*
BFV22SH*

BFP22SH

BFV22H17/8

Description

Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin

Color

Solid Back
Solid Back
Holes in Back
Holes in Back
Slots in Back
Slots in Back

Gray
Beige
Gray
Beige
Gray
Beige

13/16”
(20.6)

Weight
Lbs./ft.

kg/m

.63
.63
.60
.60
.61
.61

(.94)
(.94)

15/8”
(41.3)

(.89)
(.89)
(.91)
(.91)

15/8”
(41.3)

* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length

BFP22A
BFV22A

13/16”
(20.6)

• Channel Lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
• Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.

15/8”
(41.3)

BFP22A
BFV22A
Solid Back to
Back
Part No.
BFP22A*
BFV22A*

Material

Description

Polyester Resin
Vinyl Ester Resin

Color

Back To Back
Back To Back

Gray
Beige

31/4”
(82.5)

Weight
Lbs./ft.

kg/m

1.15
1.15

(1.71)
(1.71)

15/8”
(41.3)

* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length
WARNING: Appropriate protective clothing and respiratory
protection device should be worn when field
cutting or grinding fiberglass.

Published design loads on page 185 are based on
usage at 70°F (21°C) and must be reduced for
continuous exposure to higher temperatures. Refer to
the chart below for high temperature applications.

Temperature

Field Cutting Sealant Kits
RSK010

Pint Sealing Kit (473 cm3)
includes sealant and brush applicator

• Seals exposed fibers after field cutting. •
• UV resistant •

75°F
100°F
125°F
150°F
175°F
200°F

(24°C)
(38°C)
(52°C)
(66°C)
(79°C)
(93°C)

Reference page 182 for general fitting specifications.

184

Design Load Multiplier
100%
90%
78%
68%
60%
52%

Fiberglass
BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN
Beam
Span
in.

Part
No.

mm

Maximum
Allowable
Beam Load
Load

Deflection
@ Maximum
Allowable
Beam Load

Allowable Load @ Deflection =
1/240 Span

1/360 Span

Lbs.

kN

in.

mm

Lbs.

kN

Lbs.

kN

(305)

BFP22
BFP22A

1781
2259

(7.92)
(10.05)

0.064
0.037

(1.62)
(.94)

1392
2259

(6.19)
(10.05)

928
2051

(4.13)
(9.12)

24”

(609)

BFP22
BFP22A

890
1127

(3.96)
(5.01)

0.256
0.147

(6.50)
(3.73)

347
767

(1.54)
(3.41)

231
511

(1.03)
(2.27)

36”

(914)

BFP22
BFP22A

592
750

(2.63)
(3.33)

0.576
0.330

(14.63)
(8.38)

153
338

(0.68)
(1.50)

101
224

(0.45)
(0.99)

48”

(1219)

BFP22
BFP22A

443
560

(1.97)
(2.49)

1.024
0.587

(26.01)
(14.91)

85
188

(0.38)
(0.83)

55
123

(0.24)
(0.55)

60”

(1524)

BFP22
BFP22A

353
446

(1.57)
(1.98)

1.600
0.918

(40.64)
(23.32)

53
117

(0.23)
(0.52)

34
76

(0.15)
(0.34)

72”

(1829)

BFP22
BFP22A

293
370

(1.30)

2.303
1.322

(58.49)

(0.34)

22
50

(0.10)

(33.58)

35
78

(0.15)

(1.64)

96”

(2438)

BFP22
BFP22A

218
273

(0.97)
(1.21)

4.095
2.350

(104.01)
(59.69)

17
39

(0.07)
(0.17)

9
23

(0.04)
(0.10)

120”

(3048)

BFP22
BFP22A

172
214

(0.76)
(0.95)

6.398
3.671

(162.51)
(93.24)

8
19

(0.03)
(0.08)

3
9

(0.01)
(0.04)

(0.22)

BEAM LOADING DATA FOR GLASS REINFORCED VINYL ESTER RESIN
Beam
Span
in.

Part
No.

mm

Maximum
Allowable
Beam Load
Load

Deflection
@ Maximum
Allowable
Beam Load

Allowable Load @ Deflection =
1/240 Span

1/360 Span

Lbs.

kN

in.

mm

Lbs.

kN

Lbs.

kN

12”

(305)

BFV22
BFV22A

2220
6442

(9.87)
(28.65)

0.071
0.039

(1.80)
(0.99)

1568
6442

(6.97)
(29.65)

1045
5549

(4.65)
(24.68)

24”

(609)

BFV22
BFV22A

1109
3219

(4.93)
(14.32)

0.283
0.155

(7.19)
(3.94)

391
2079

(1.74)
(9.25)

260
1385

(1.15)
(6.16)

36”

(914)

BFV22
BFV22A

738
2144

(3.28)
(9.53)

0.637
0.348

(16.18)
(8.84)

172
922

(0.76)
(4.10)

114
613

(0.51)
(2.72)

48”

(1219)

BFV22
BFV22A

553
1606

(2.46)
(7.14)

1.133
0.619

(28.78)
(15.72)

96
516

(0.43)
(2.29)

63
342

(0.28)
(1.52)

60”

(1524)

BFV22
BFV22A

441
1283

(1.96)
(5.70)

1.770
0.967

(44.96)
(24.56)

60
327

(0.26)
(1.45)

39
216

(0.17)
(0.96)

72”

(1829)

BFV22
BFV22A

366
1067

(1.63)
(4.74)

2.549
1.393

(64.74)
(35.38)

40
224

(0.18)
(0.99)

25
147

(0.11)
(0.65)

96”

(2438)

BFV22
BFV22A

273
796

(1.21)
(3.54)

4.531
2.477

(115.09)
(62.91)

19
121

(0.08)
(0.54)

11
78

(0.05)
(0.34)

120”

(3048)

BFV22
BFV22A

216
633

(0.96)
(2.81)

7.079
3.870

(179.80)
(98.30)

9
72

(0.04)
(0.32)

7
44

(0.02)
(0.19)

Loading Information
Beam Loads:
The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the load is
concentrated at center span, multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8.
All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between supports to prevent twist.
For channels with holes or slots use 90% of recommended load shown in channel loading chart.

Reference page 182 for general fitting specifications.

185

Fiberglass Materials

12”

Fiberglass
BFP42 THRU BFV42SH
• Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
• Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.

BFP42SH

BFP42H17/8

Fiberglass Materials

BFP42*
BFV42*
BFP42H17/8*
BFV42H17/8*
BFP42SH*
BFV42SH*

9/16”

9/16”

BFV42
Solid Back
Part No.

BFV42SH
(14.3) x 7/8” (22.2) slots
2” (50.8) on centers

BFV42H17/8
(14.3) holes
17/8” (47.6) on centers

BFP42

Material

Description

Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin

Color

Solid Back
Solid Back
Holes in Back
Holes in Back
Slots in Back
Slots in Back

Gray
Beige
Gray
Beige
Gray
Beige

13/16”
(20.6)

Weight
Lbs./ft.

kg/m

.48
.48
.46
.46
.47
.47

(.71)
(.71)
(.68)
(.68)
(.70)
(.70)

1”
(25.4)

15/8”
(41.3)

* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length

BFP42A
BFV42A
• Channel lengths: 10 Ft. (3.05 m) and
20 Ft. (6.09 m)
• Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.

13/16”
(20.6)

1”

BFP42A

(25.4)

BFV42A
Solid Back to Back

Part No.
BFP42A*
BFV42A*

Color

Description

Material
Polyester Resin
Vinyl Ester Resin

Back To Back
Back To Back

Gray
Beige

2”
(50.8)

Weight
Lbs./ft.

kg/m

.85
.85

(1.26)

15/8”
(41.3)

(1.26)

* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length

WARNING: Appropriate protective clothing and respiratory
protection device should be worn when field
cutting or grinding fiberglass.

Field Cutting Sealant Kits
RSK010

Pint Sealing Kit (473 cm3)
includes sealant and brush applicator

• Seals exposed fibers after field cutting. •
• UV resistant •

Published design loads on page 187 are based on
usage at 70°F (21°C) and must be reduced for
continuous exposure to higher temperatures. Refer to
the chart below for high temperature applications.

Temperature
75°F (24°C)
100°F (38°C)
125°F (52°C)
150°F (66°C)
175°F (79°C)
200°F (93°C)

Reference page 182 for general fitting specifications.

186

Design Load Multiplier
100%
90%
78%
68%
60%
52%

Fiberglass
BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN
Beam
Span
in.

Part
No.

mm

Maximum
Allowable
Beam Load
Load

Deflection
@ Maximum
Allowable
Beam Load

Allowable Load @ Deflection =
1/240 Span

1/360 Span

Lbs.

kN

in.

mm

Lbs.

kN

Lbs.

kN

(305)

BFP42
BFP42A

841
2325

(3.74)
(10.34)

0.104
0.060

(2.64)
(1.52)

403
1948

(1.79)
(8.66)

269
1299

(1.19)
(5.78)

24”

(609)

BFP42
BFP42A

420
1161

(1.87)
(5.16)

0.417
0.239

(10.59)
(6.07)

100
486

(0.44)
(2.16)

66
323

(0.29)
(1.43)

36”

(914)

BFP42
BFP42A

279
773

(1.24)
(3.44)

0.938
0.537

(23.82)
(13.64)

43
214

(0.19)
(0.95)

29
142

(0.13)
(0.63)

48”

(1219)

BFP42
BFP42A

208
578

(0.92)
(2.57)

1.667
0.955

(42.34)

(24.26)

23
119

(0.10)
(0.53)

15
78

(0.06)
(0.34)

60”

(1524)

BFP42
BFP42A

166
461

(0.74)
(2.05)

2.604
1.491

(66.14)
(37.87)

14
74

(0.06)
(0.33)

8
48

(0.03)
(0.21)

72”

(1829)

BFP42
BFP42A

137
383

(0.61)
(1.70)

3.750
2.148

(95.25)
(54.56)

8
49

(0.03)
(0.22)

5
31

(0.02)
(0.14)

96”

(2438)

BFP42
BFP42A

101
284

(0.45)
(1.26)

6.667
3.818

(169.34)
(96.98)

3
24

(0.01)
(0.10)

–
14

–
(0.04)

(3048)

BFP42
BFP42A

79
224

(0.35)
(0.99)

10.417
5.966

(264.59)
(151.53)

–
11

–

–
5

(0.02)

120”

(0.05)

–

BEAM LOADING DATA FOR GLASS REINFORCED VINYL ESTER RESIN
Beam
Span
in.

Part
No.

mm

Maximum
Allowable
Beam Load
Load

Deflection
@ Maximum
Allowable
Beam Load

Lbs.

kN

in.

mm

Allowable Load @ Deflection =
1/240 Span

1/360 Span

Lbs.

kN

Lbs.

kN

12”

(305)

BFV42
BFV42A

988
2865

(4.39)
(12.74)

0.112
0.063

(2.84)
(1.60)

440
2278

(1.96)
(10.13)

293
1518

(1.30)
(6.75)

24”

(609)

BFV42
BFV42A

493
1431

(2.19)
(6.36)

0.448
0.252

(11.38)
(6.40)

109
568

(0.48)
(2.52)

73
378

(0.32)
(1.68)

36”

(914)

BFV42
BFV42A

328
953

(1.46)
(4.24)

1.009
0.566

(25.63)
(14.37)

48
251

(0.21)
(1.11)

31
166

(0.14)
(0.74)

48”

(1219)

BFV42
BFV42A

245
713

(1.09)
(3.17)

1.793
1.006

(45.54)
(25.55)

26
139

(0.11)
(0.62)

16
92

(0.07)
(0.41)

60”

(1524)

BFV42
BFV42A

195
569

(0.87)
(2.53)

2.802
1.572

(71.17)
(39.93)

15
87

(0.06)
(0.38)

9
57

(0.04)
(0.25)

72”

(1829)

BFV42
BFV42A

162
473

(0.72)
(2.10)

4.035
2.264

(102.49)
(57.50)

9
58

(0.04)
(0.26)

5
37

(0.02)
(0.16)

96”

(2438)

BFV42
BFV42A

120
351

(0.53)
(1.56)

7.173
4.025

(182.19)
(102.23)

3
29

(0.01)
(0.13)

1
17

(0.004)
(0.07)

120”

(3048)

BFV42
BFV42A

94
278

(0.42)
(1.23)

11.207
6.288

(284.66)
(159.71)

–
14

(0.06)

–
7

(0.03)

–

–

Loading Information
Beam Loads:
The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the load is
concentrated at center span, multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8.
All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between supports to prevent twist.
For channels with holes or slots use 90% of recommended load shown in channel loading chart.

Reference page 182 for general fitting specifications.

187

Fiberglass Materials

12”

Fiberglass
BF*22I
CONCRETE INSERTS

Fiberglass Materials

• Design Load 300 Lbs (1.47 kN)
• Safety Factor of 3
• Standard lengths: 6” (152),12” (305), 24” (609),
36” (914), 48” (1219), 60” (1524), 72” (1829),
84” (2133), 96” (2438), 108” (2743) and 120” (3048)
• Available Material:
*Insert P for BFP - Polyester Resin channel and tee
*Insert V for BFV - Vinyl Ester Resin channel with Polyester Resin tee
• Shipped with removable styrofoam insert

Length

31/8”
(79.4)

Field Cutting Sealant Kits
RSK010

...

Pint Sealing Kit (473 cm3)
includes sealant and brush applicator

15/8” (41.3) x 15/8” (41.3)
Channel Size

• Seals exposed fibers after field cutting. •
• UV resistant •

BFV501 SERIES
U-BOLTS WITH HEX NUTS
•
•
•
•

Design Load Safety Factor of 3
Load A: Straight down loading
Load B: Side loading
Inner surface of U-Bolt is flat to
provide additional contact surface area
• Material: Glass Reinforced Polyurethane

Load A

Load B

Part No.

Nominal
Pipe Size

Thread
Size

Design Load
A

Design Load
B

Lbs.

kN

Lbs.

in.

mm

BFV501-1/2

1/2

(15)

3/8”-16

300

(1.33)

BFV501-3/4

3/4

(20)

3/8”-16

300

(25)

3/8”-16

(32)

3/8”-16

(40)

3/8”-16

(50)

1/2”-13

(65)

1/2”-13

(80)

1/2”-13

(90)

1/2”-13

(100)

1/2”-13

BFV501-1

1

BFV501-11/4

11/4

BFV501-11/2

11/2

BFV501-2
BFV501-21/2
BFV501-3
BFV501-31/2
BFV501-4

2
21/2
3
31/2
4

Maximum
Torque

Wt./C

kN

in.-Lbs.

N•m

Lbs.

kg

150

(.67)

30

(3.4)

3.5

(1.59)

(1.33)

150

(.67)

30

(3.4)

3.9

(1.77)

300

(1.33)

150

(.67)

30

(3.4)

4.4

(1.99)

300

(1.33)

150

(.67)

30

(3.4)

4.8

(2.18)

300

(1.33)

150

(.67)

30

(3.4)

5.2

(2.36)

600

(2.67)

200

(.89)

60

(6.8)

7.7

(3.49)

600

(2.67)

200

(.89)

60

(6.8)

10.2

(4.63)

600

(2.67)

200

(.89)

60

(6.8)

12.6

(5.71)

600

(2.67)

200

(.89)

60

(6.8)

15.1

(6.85)

600

(2.67)

200

(.89)

60

(6.8)

17.6

(7.98)

Reference page 182 for general fitting specifications.

188

Fiberglass
CHANNEL NUTS
• Design Load Safety Factor of 3
• Overall Nut Height 5/8” (15.9)
• Maximum torque and slip resistance loads shown are
when using stainless steel bolts. When using fiberglass
hardware use Max. Torque for fiberglass bolts, and
multiply slip resistance loads by .14 for 3/8” and .60 for
1/2” thread size.
• Material: Glass Reinforced Polyurethane
• Spring Material: Zinc Plated Steel
Part No.
W/O Spring

BFV-224
BFV-223
BFV-228
BFV-225

BFV-224WO
BFV-223WO
BFV-228WO
BFV-225WO

Thread
Size

WITH
SPRING

Pull-Out

1/4”-20
5/16”-18
3/8”-16
1/2”-13

Slip Resistance

Max. Torque

kN

Lbs.

N

in.-Lbs.

N•m

Lbs.

300
300
300
300

(1.33)

150
150
150
150

(.67)

200
200
200
200

(22.6)

2.4
2.5
2.3
2.1

(1.33)
(1.33)
(1.33)

(.67)
(.67)
(.67)

BFVHHCS
HEX HEAD CAP SCREWS
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane
Part
No.

Thread
Size

5/16

5/16”-18
5/16”-18

Design Load
(in tension)
190

(.84)

30

(3.4)

.4

(.18)

190

(.84)

30

(3.4)

.5

(.23)

5/16”-18

190

(.84)

30

(3.4)

.6

(.27)

5/16”-18

190

(.84)

30

(3.4)

.8

(.36)

3/8”-16

300

(1.33)

45

(5.1)

.9

(.41)

3/8”-16

300

(1.33)

45

(5.1)

1.1

(.50)

3/8”-16

300

(1.33)

45

(5.1)

1.3

(.59)

3/8”-16

300

(1.33)

45

(5.1)

1.3

(.59)

3/8”-16

300

(1.33)

45

(5.1)

1.5

(.68)

1/2”-13

490

(2.18)

110

(12.4)

1.4

(.63)

11/4

1/2”-13

490

(2.18)

110

(12.4)

1.8

(.81)

BFVHHCS 1/2 x 11/2

1/2”-13

490

(2.18)

110

(12.4)

2.2

(1.00)

BFVHHCS 1/2 x 2

1/2”-13

490

(2.18)

110

(12.4)

3.0

(1.36)

BFVHHCS 1/2 x 21/2

1/2”-13

490

(2.18)

110

(12.4)

3.7

(1.68)

1/2”-13

490

(2.18)

110

(12.4)

4.5

(2.04)

x1

BFVHHCS

5/16

x

11/2

BFVHHCS 5/16 x 2
BFVHHCS

3/8

x1

BFVHHCS 3/8 x 11/4
BFVHHCS

3/8

x

11/2

BFVHHCS 3/8 x 2
BFVHHCS

3/8

x

21/2

BFVHHCS 1/2 x 1
BFVHHCS

BFVHHCS

1/2

1/2

x

x3

N•m

Wt./C

in.-Lbs.

BFVHHCS 5/16 x 11/4

Lbs.

Max. Torque

kN

BFVHHCS

Wt./C

Lbs

Lbs.

kg

BFVHN
HEX NUTS
• 3/4” & 1” sizes are available. Contact inside
sales for details
• Material: Glass Reinforced Polyurethane
Part
No.

Thread
Size

Nut Thickness
in.

mm

Lbs.

Wt./C
kg

BFVHN

5/16

5/16”-18

17/64

(6.7)

.2

(.09)

BFVHN

3/8

3/8”-16

21/64

(8.3)

.3

(.13)

BFVHN

1/2

1/2”-13

7/16

(11.1)

.7

(.32)

BFVHN

5/8

5/8”-11

35/64

(13.9)

1.4

(.63)

Reference page 182 for general fitting specifications.

189

(22.6)
(22.6)
(22.6)

kg
(1.09)
(1.13)
(1.04)
(0.95)

Fiberglass Materials

Part No.
With Spring

W/O
(WITHOUT)
SPRING

Fiberglass
BFVATR
ALL THREADED ROD

Fiberglass Materials

• Design Load Safety Factor of 3
• Use ATR nuts in place of hex nuts with 3/8”-16 and 1/2”-13 threaded rod
in order to obtain minimum required thread engagement of
17/32” (13.5) to obtain design load shown below.
• Material: Glass Reinforced Vinyl Ester

Design Load
(in tension)

Max. Torque

Lbs.

kN

in.-Lbs.

Lbs.

kg

425

(1.89)

45

(5.1)

.08

(.04)

1/2”-13

750

(3.33)

110

(12.4)

.13

(.06)

5/8”-11

950

(4.22)

230

(26.0)

.21

(.09)

Part
No.
BFVATR 3/8 x 48”

Thread
Size
3/8”-16

BFVATR 1/2 x 48”
BFVATR

5/8

x 48”

N•m

Wt./Ft.

BFVATRHN
THREADED ROD NUTS
• ATR Nut is required with 3/8”-16 and 1/2”-13 ATR to provide
additional thread engagement which is critical to ATR load
carrying capacity.
• Material: Glass Reinforced Polyurethane

H
Part
No.
BFVATRHN 3/8
BFVATRHN 1/2

Thread
Size

in.

H
mm

Lbs.

Wt./C
kg

3/8”-16

3/4

(19)

7/8

(22)

.8
1.7

(.36)

1/2”-13

(.77)

BFVFW

BFV655 SERIES

FLAT WASHERS

ROD COUPLINGS

• Material: PVC

• Material: Glass Reinforced Polyurethane

Part
No.

Hole
Size

Wt./C

in.

Lbs.

kg

BFVFW 3/8

3/8

.5

(.22)

1/2

1/2

.5
.5
.5
.5

(.22)

BFVFW
BFVFW
BFVFW
BFVFW

5/8

5/8

3/4

3/4

1

1

Part
No.

Thread

Wt./C

Size

Lbs.

kg

(.22)

BFV655-3/8

3/8”-16

BFV655-1/2

1/2”-13

7.4
11.3

(3.35)

(.22)
(.22)

BFV655-5/8

5/8”-11

16.7

(7.57)

BFVSL SERIES
STOP-LOCK KITS
• Material: Glass Reinforced Polyurethane

Part

Thread

No.

Size

Lbs.

Wt./C
kg

BFVSL-3/8

3/8”-16

7.4

(3.35)

BFVSL-1/2

1/2”-13

11.3

(5.12)

Reference page 182 for general fitting specifications.

190

(5.12)

Fiberglass
BFV100 thru BFV300

Design Load

ADJUSTABLE PIPE CLAMPS
•
•
•
•
•
•
•
•

Stop-Lock Kit
for vertical
installation

Nominal
Pipe Sizes

Part
No.
BFV100
BFV200
BFV300

Pipe O.D.
Range

Design
Load

Max.
Torque

in.

mm

in.

mm

Lbs.

kN

in.-Lbs.

N•m

- 11/2
11/2 - 2
21/2 - 3

(15- 40)

.75 - 1.90
1.90 - 2.37
2.87 - 3.50

(21.3 - 48.3)

135
135
145

(.60)

10
36
36

(1.13)

(40 - 51)

1/2

(63 - 76)

(48.3 - 60.3)
(73.0 - 88.9)

(.60)
(.64)

BFV2000 SERIES
NON-METALLIC PIPE CLAMPS
• For rigid and PVC conduit.
• Standard hardware includes slotted round head machine
screw and square nut in 316 stainless steel
• Design Load Safety Factor of 3
• Material: Glass Reinforced PPO
• Not recommended for vertical installation without additional Stop-Lock
Kit. Kit includes one square washer, channel nut and hex head cap
screw. Order (Stop-Lock Kit) BFVSL-3/8 for 3/8”-16 hardware or
BFVSL-1/2 for 1/2”-13 hardware. Mount kit below clamp when used
in vertical strut to prevent clamp slipping.
• If non-metallic hardware is required, add N to the part number.
Example: BFV2008N

Part No.
BFV2008
BFV2009
BFV2010
BFV2011
BFV2012
BFV2013
BFV2014
BFV2015
BFV2016
BFV2017

Nominal
Pipe Size

Design Load

Maximum
Torque

in.

mm

Lbs.

kN

in.-Lbs.

1/2

(15)

(1.33)

3/4

(20)

1
11/4
11/2
2
21/2
3
31/2
4

(25)

300
300
300
300
300
300
300
300
300
300

10
10
10
10
10
10
10
10
10
10

(32)
(40)
(50)
(65)
(80)
(90)
(100)

(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)

Design Load

N•m
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)

Stop-Lock Kit
for vertical
installation

Reference page 182 for general fitting specifications.

191

(4.07)
(4.07)

Fiberglass Materials

Completely Non-Metallic
Adjustable to U.S. & Metric Pipe Diameters
Fits OD Sizes 3/4” (19.0) to 31/2” (88.9)
Easy To Install
No Special Tools Required
Design Load Safety Factor of 3
Material: Glass Reinforced Polyurethane
Not recommended for vertical installation without additional
Stop-Lock Kit. Kit includes one square washer, channel nut
and hex head cap screw. Order (Stop-Lock Kit) BFVSL-3/8
for 3/8”-16 hardware or BFVSL-1/2 for 1/2”-13 hardware.
Mount kit below clamp when used in vertical strut to
prevent clamp slipping.

Fiberglass
BFP2400 SERIES
2-HOLE PIPE CLAMPS
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyester
Design Load

15/8”
(41.3)
Fiberglass Materials

Pipe
Size

13/32” (10.3)
Hole Dia.

A
B

Part
No.
BFP2400-2
BFP2400-3
BFP2400-4
BFP2400-6

Nominal
Pipe
Size

A

Design
Load

B

in.

mm

in.

mm

in.

mm

Lbs.

kN

2
3
4
6

(50)

23/8
31/2
41/2
65/8

(60)

51/2
63/4
73/4
10

(140)

115
130
150
150

(0.51)

(80)
(100)
(150)

(89)
(114)
(168)

(171)
(197)
(254)

(0.58)
(0.66)
(0.66)

BFV751 & BFV751J
1/2”-13 x 2” (50.8)

BEAM CLAMP
• Design Load Safety Factor of 3
• BFV751J (clip included) must be used
when installed on tapered flange beams.
• Material: Glass Reinforced Polyurethane
• Setscrew material: Stainless Steel 316
ASTM F593 Group 2, S4

Screw

3”

BFV751
(Clamp
Only)

BFV751J
(Clamp and
Retainer Clip)

(76.2)

1”
(25.4)

41/4”
(108.0)

Part No.
BFV751-3/8
BFV751J-3/8
BFV751-1/2
BFV751J-1/2
BFV751-5/8
BFV751J-5/8

For Hanger Rod
Size A
3/8”-16
3/8”-16
1/2”-13
1/2”-13
5/8”-11
5/8”-11

Design Load

Torque

Lbs.

kN

ft.-Lbs.

N•m

500
500
500
500
500
500

(2.22)

10
10
10
10
10
10

(13)

(2.22)
(2.22)
(2.22)
(2.22)
(2.22)

Tapped for
Hanger Rod
Size A

(13)
(13)
(13)
(13)
(13)

Reference page 182 for general fitting specifications.

192

11/8”
(28.6)

BFVATR3/8”
& BFPUATRHN
(Order Separately)

Fiberglass
BFV755
BEAM CLAMP
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane
• Setscrew material: Stainless Steel 316
ASTM F593 Group 2, S4

1/2”-13 x 2” (50.8)

25/8”

Screw

(66.7)

3”
(76.2)

Part No.

For Hanger Rod
Size A
3/8”-16

BFV755-1/2

1/2”-13

3/4”
(19.0)

Torque

Lbs.

kN

ft.-Lbs.

N•m

400
400

(1.78)

10
10

(13)

(1.78)

Tapped for
Hanger Rod
Size A

(13)

BFV3104 SERIES
CLEVIS HANGERS
• Design Load Safety Factor of 3 at 120°F (49°C).
• Insulation may be required at higher temperatures.
• Order hanger rod and nuts separately.
• Material: Glass Reinforced Polyurethane
For BFV3104-1 thru BFV3104-6
• Material: Glass Reinforced Polyester & Vinyl Ester
For BFV3104-8 thru BFV3104-12

C

C

A

A

B

B

BFV3104-1 thru BFV3104-6

Nominal
Pipe
Size

Part
No.

in.

A

mm

BFV3104-1
1
(50)
1
1
BFV3104-1 /2
1 /2
(65)
BFV3104-2
2
(50)
BFV3104-21/2, 3, 4 21/2-4 (65-100)
BFV3104-6
6
(150)

Part
No.

Nominal
Pipe
Size
in.

BF*3104-8
BF*3104-10
BF*3104-12

8
10
12

B

in.

(200)

91/4

113/8
(300) 131/2

Hanger
Rod
Size

C

in.

mm

in.

mm

in.

mm

11/2
2
21/2
51/8
63/4

(38)

41/4
51/8
61/2
10
125/16

(108)

11/4
11/4
11/4
11/2
2

(32)

1/2”-13

(32)

1/2”-13

(32)

1/2”-13

(38)

1/2”-13

(51)

1/2”-13

(51)
(63)
(130)
(171)

(130)
(165)
(254)
(313)

B

A

mm

(250)

BFV3104-8 thru BFV3104-12

mm

in.

(235)

165/8

(422)

(289)

197/8
223/8

(505)

(343)

Hanger
Rod
Size

C
mm

(568)

in.

3
4
5

mm
(76)

5/8”-11

(101)

5/8”-11

(127)

5/8”-11

*Specify P for polyester or V for Vinyl ester.
Reference page 182 for general fitting specifications.

193

Design
Load
Lbs.

kN

670
670
730
1150
1170

(2.98)
(2.98)
(3.25)
(5.11)
(5.20)

Design
Load
Lbs.

kN

350
450
600

(1.55)
(2.01)
(2.69)

Fiberglass Materials

BFV755-3/8

Design Load

Fiberglass
BF*409 SERIES
BRACKETS 6” (152) TO 24” (609) LONG
• Design Load Safety Factor of 3 based on uniform loading
• MH1 - From Top of Bracket to center of Mounting Hole
• MH2 - From Bottom of Bracket to center of Mounting Hole

11/4”
(31.7)

A

Fiberglass Materials

MH1

12"
(304.8)

BF*409-6
BF*409-9
BF*409-12
BF*409-18
BF*409-24

Design
Load

A

Part No.
in.

mm

Lbs.

kN

10
13
16
22
28

(250)

1400
1000
800
675
450

(6.22)

(330)
(406)
(559)
(711)

MH2

13/32” (10.3) Dia.
Mounting Holes

(4.45)
(3.56)

11/4”
(31.7)

(3.00)
(2.00)

* Insert P for Glass Reinforced Polyester Resin or
V for Glass Reinforced Vinyl Ester Resin

BF*494 SERIES
BRACKETS 24” (609) TO 36” (914) LONG
•
•
•
•

Design Load Safety Factor of 3 based on uniform loading
MH1 - From Top of Bracket to center of Mounting Hole
MH2 - From Bottom of Bracket to center of Mounting Hole
Material: Glass Reinforced Vinyl Ester or Polyester

11/4”
(31.7)
MH1

A

B

BF*494-24
BF*494-30
BF*494-36

Design
Load

B

A

Part No.
in.

mm

in.

mm

Lbs.

kN

28
34
40

(711)

23
26
29

(584)

750
750
750

(3.33)

(863)
(1016)

(660)
(736)

(3.33)

MH2

(3.33)

Mounting Holes

11/4”

* Insert P for Glass Reinforced Polyester Resin or
V for Glass Reinforced Vinyl Ester Resin

(31.7)

Reference page 182 for general fitting specifications.

194

13/32" (10.3) Dia.

Fiberglass
BFV201

BFV202

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

SQUARE WASHER FOR 3/8” BOLT

SQUARE WASHER FOR 1/2” BOLT

15/8”
(41.3)

15/8”
(41.3)

9/16” (14.3)
Diameter Hole

BFV340

BFV129

TWO HOLE FLAT PLATE

TWO HOLE SPLICE PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

15/8”
(41.3)

31/4”
(82.5)
31/2”
(88.9)

BFV141

BFV557

THREE HOLE FLAT PLATE

THREE HOLE FLAT PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

47/8”
(123.8)

53/8”
(136.5)

15/8”
(41.3)

Reference page 182 for general fitting specifications.

195

15/8”
(41.3)

Fiberglass Materials

13/32” (10.3)
Diameter Hole

Fiberglass
BFV341

BFV342

FOUR HOLE SPLICE PLATE

FIVE HOLE FLAT PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

91/8”
(231.8)

71/4”

Fiberglass Materials

(184.1)

BFV140

BFV143

THREE HOLE FLAT CORNER PLATE

FOUR HOLE FLAT CORNER PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

31/2”
(88.9)

31/2”
(88.9)

53/8”
(136.5)

BFV132

BFV133

FIVE HOLE FLAT CROSS PLATE

FOUR HOLE FLAT TEE PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

53/8”
(136.5)

31/2”
(88.9)

53/8”
(136.5)

53/8”
(136.5)

Reference page 182 for general fitting specifications.

196

Fiberglass
BFV135

BFV142

THREE HOLE FLAT GUSSET CORNER PLATE

FOUR HOLE FLAT GUSSET CORNER PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”

31/2”
(88.9)

(88.9)

31/2”

53/8”

(88.9)

(136.5)

BFV136

THREE HOLE FLAT GUSSET TEE PLATE

FOUR HOLE FLAT GUSSET TEE PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

Fiberglass Materials

BFV337

31/2”
(88.9)

31/2”
(88.9)

31/2”

53/8”

(88.9)

(136.5)

BFV532

BFV334

FIVE HOLE FLAT GUSSET TEE PLATE

SEVEN HOLE FLAT GUSSET CROSS PLATE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

91/8”
(231.8)
53/8”
(136.5)
53/8"
(136.5)

53/8”
(136.5)

Reference page 182 for general fitting specifications.

197

Fiberglass
BFV101

BFV103

TWO HOLE 90° CORNER ANGLE

THREE HOLE 90° CORNER ANGLE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

15/8”

15/8”

(41.3)

(41.3)

25/16”

41/8”
(104.8)

Fiberglass Materials

(58.7)

BFV104

BFV118

FOUR HOLE 90° CORNER ANGLE

FOUR HOLE 90° GUSSETTED SHELF ANGLE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

15/8”

31/2”
(88.9)

31/2”
(88.9)

(41.3)

41/8”
(104.8)

41/8”
(104.8)

BFV558

BFV371-2G

FOUR HOLE 90° CORNER ANGLE

THREE HOLE 90° GUSSETTED CORNER ANGLE

• Material: Injection Molded Glass Reinforced
Polyurethane

• Material: Injection Molded Glass Reinforced
Polyurethane

31/4”
(82.5)

THREE HOLES
(10.1)

21/4”
(57.1)

.400” Dia.

4”
(101.6)

15/8”
(41.3)

15/8”
(41.3)

15/8”
(41.3)

Reference page 182 for general fitting specifications.

198

Fiberglass
BFV280SQ

BFV281SQ

POST BASE FOR BF*22

POST BASE FOR BF*22A

• Material: Glass Reinforced Polyurethane

• Material: Glass Reinforced Polyurethane

(76.2)

5”

5”
(127.0)

(127.0)

5”

65/8”
(168.3)

(127.0)

BFV650

B217P

CHANNEL SPACER

PLASTIC CLOSURE STRIP

• Spacer I.D. accommodates 3/8" rod or bolts.
• Material: Polyurethane

• Available in 10 Ft. (3.05 m) lengths.
• Material: PVC

17/16”
(36.5)

5/8”
(15.9)

Used when attaching fittings to side walls of
channel. This channel spacer prevents wall
compression in heavy load conditions.

Reference page 182 for general fitting specifications.

199

Fiberglass Materials

3”
(76.2)

3”

Mini Channel & Fittings
Cooper B-Line’s mini channels and fittings provide
for an economical method of supporting light load
requirements on a metal framing system.

Channel
Channels are cold formed on our modern rolling
mills from 18 Ga. (1.2 mm) low carbon steel strips
plain steel (ASTM A1008 33,000 PSI min. yield)
and pre- galvanized steel strips, (ASTM A653
33,000 PSI min. yield). A continuous slot with
inturned lips provides the ability to make
attachments at any point. Channel combinations
are made with new state of the art, high-tech
welding equipment.

Lengths
Standard lengths are 10’ (3.05 m) and 20’ (6.09 m)
for B62 series, and 10’ (3.05 m) for B72 series.
Custom lengths are available.

Mini Channel & Fittings

Fittings
Mini fittings are formed from hot rolled pickled and
oiled strip or sheet steel (ASTM A1011, HSLAS,
Grade 50, Class1). The following dimensions
apply to all fittings except as noted on the
drawings:
Hole Size–9/32” (7.14 mm) Dia.
Hole Spacing–13/32” (10.3 mm) from end and
11/16” (27.0 mm) on center.
Width–13/16” (20.6 mm)
Thickness–1/8” (3.2 mm)

Materials & Finishes*
Finish
Code

Finish

PLN

Plain

ZN
GRN
GLV

Electro-Plated Zinc
Dura-Green
Pre-Galvanized

HDG

Hot-Dipped Galvanized

Specification
ASTM A1011, HSLAS,
Grade 50, Class 1
ASTM B633 SC3 Type II
ASTM A653
33,000 PSI min. yield
ASTM A123

*Unless otherwise noted.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

200

B62 Channel
13/16”

13/16”

• Thickness: 18 Ga. (1.2 mm)
• Standard lengths: 10’ (3.05 m)
& 20’ (6.09 m)
• Standard finishes: Plain, Dura-Green,
Pre-Galvanized
• Weight: .42 Lbs./Ft. (.62 kg/m)

(20.6)

(20.6)
7/16”
(11.1)

3/16”

3/16”

(4.7)

(4.7) 3
/32”
(2.4)

13/16”

Y
X

.346
(8.8)

(20.6)

15/8”
(41.3)

X

Y
.406
(10.3)

B62A

13/16”

.406
(10.3)

(20.6)

Wt. .84 Lbs./Ft. (1.25 kg/m)
X - X Axis

SECTION PROPERTIES
Channel

Areas of
Section

Weight

Moment of
Inertia (I)

Section
Modulus (S)

cm2

in.4

cm4

in.3

cm3

(.80)
(1.59)

.0103
.0500

(.43)
(2.08)

.0221
.0616

(.36)
(1.01)

lbs./ft. kg/m sq. in.

B62
B62A

.420 (.62)
.839 (1.25)

.123
.247

Y - Y Axis
Radius of
Gyration (r)

Moment of
Inertia (I)
in.4

cm

in.

.289 (.73)
.450 (1.14)

Section
Radius of
Modulus (S) Gyration (r)

cm4

in.3

cm3

.0134 (.56) .0330 (.54)
.0269 (1.12) .0663 (1.09)

in.

cm

.330
.330

(.84)
(.84)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

BEAM LOADING

In.

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

Channel

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

364
420*
182
420*
121
341
91
256
73
205
61
170

(1619.1)
(1868.2)
(809.6)
(1868.2)
(538.2)
(1516.8)
(404.8)
(1138.7)
(324.7)
(911.9)
(271.3)
(756.2)

.027
.006
.109
.051
.245
.141
.436
.250
.681
.391
.981
.563

(.68)
(.15)
(2.77)
(1.29)
(6.22)
(3.58)
(11.07)
(6.35)
(17.30)
(9.93)
(24.92)
(14.30)

364
420*
167
420*
74
341
42
204
27
131
19
91

(1619.1)
(1868.2)
(742.8)
(1868.2)
(329.1)
(1516.8)
(186.8)
(907.4)
(120.1)
(582.7)
(84.5)
(404.8)

364
420*
111
420*
50
242
28
136
18
87
12
61

(1619.1)
(1868.2)
(493.7)
(1868.2)
(222.4)
(1076.4)
(124.5)
(604.9)
(80.0)
(387.0)
(53.4)
(271.3)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate
lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load
capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

mm

12

(305)

24

(609)

36

(914)

48

(1219)

60

(1524)

72

(1829)

Channel
Style
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A

Max. Column Loading (Loaded @ C.G.)

Max. Column Loading K = .80
Loaded@
Loaded@
Slot Face
C.G.

K = .65

K = 1.0

K = 1.2

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

2052
4666
1350
4275
818
3624
589
2713
456
1765
365**
1225

(9127.7)
(20755.4)
(6005.1)
(19016.1)
(3638.6)
(16120.3)
(2620.0)
(12068.0)
(2028.4)
(7851.1)
(1623.6)
(5449.1)

820
1449
645
1367
471
847
369
504
300
323
248
224

(3647)
(6445)
(2869)
(6081)
(2095)
(3767)
(1641)
(2242)
(1334)
(1437)
(1103)
(996)

2161
4710
1624
4453
1053
4023
745
3421
579
2647
470
1856

(9612.6)
(20951.1)
(7223.9)
(19807.9)
(4684.0)
(17895.2)
(3313.9)
(15217.3)
(2575.5)
(11774.4)
(2090.6)
(8255.9)

1890
4593
1020
3982
633
2965
456
1765
347**
1129
271**
784**

(8407.1)
(20430.7)
(4537.2)
(17712.8)
(2815.7)
(13189.0)
(2028.4)
(7851.1)
(1543.5)
(5022.0)
(1205.4)
(3487.4)

1715
4503
818
3624
515
2179
365**
1225
271**
784**
–
545**

(7628.7)
(20030.3)
(3638.6)
(16120.3)
(2290.8)
(9692.7)
(1623.6)
(5449.1)
(1205.4)
(3487.4)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 200 for general fitting specifications.

201

–
(2424.3)

Mini Channel & Fittings

Beam Span

B72 Channel
• Thickness: 18 Ga. (1.2 mm)
• Standard lengths: 10’ (3.05 m)
• Standard finishes: Plain, Dura-Green,
Pre-Galvanized
• Weight: .29 Lbs./Ft. (.43 kg/m)

13/16”

13/16”

(20.6)

(20.6)
7/16”
(11.1)

Y

3/16”

3/16”

(4.7)

(4.7)
3/32”

13/32”

Areas of
Section

Weight

Mini Channel & Fittings

.287
.574

(.43)
(.85)

.084
.169

Wt. .58 Lbs./Ft. (.87 kg/m)
Y - Y Axis

Section
Modulus (S)

in.4

cm4

in.3

cm3

in.

cm

(.07)
(.32)

.0073
.0192

(.12)
(.31)

.146
.215

(.37)
(.55)

(.54) .0018
(1.09) .0078

.406
(10.3)

B72A

Moment of
Inertia (I)

cm2

lbs./ft. kg/m sq. in.

B72
B72A

.406
(10.3)

X - X Axis

SECTION PROPERTIES
Channel

Y

.160
(4.0)

.406
(10.3)

(20.6)

X

(2.4)

(10.3)

13/16”

X

Radius of
Gyration (r)

Moment of
Inertia (I)
in.4

Section
Radius of
Modulus (S) Gyration (r)

cm4

in.3

.0077 (.32) .0190
.0155 (.65) .0382

cm3

in.

(.31)
(.63)

cm

.302 (.77)
.303 (.77)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.

BEAM LOADING
Beam Span
In.

mm

12

(305)

24

(609)

36

(914)

36

(1219)

60

(1524)

Channel

Uniform Load @ Deflection =
1/240 Span
1/360 Span

Uniform Load and Deflection

Style

B72
B72A
B72
B72A
B72
B72A
B72
B72A
B72
B72A

Lbs.

N

In.

mm

Lbs.

N

Lbs.

N

116
210*
58
159
39
106
29
80
23
64

(516.0)
(934.1)
(258.0)
(707.2)

.051
.020
.206
.125
.465
.281
.827
.500
1.292
.782

(1.29)
(.51)
(5.23)
(3.17)

113
210*
28
127
13
57
7
32
5
20

(502.6)
(934.1)
(124.5)
(564.9)

75
210*
19
85
8
38
5
21
3
14

(324.7)
(934.1)
(84.5)
(378.1)

(173.5)
(471.5)
(129.0)
(355.8)
(102.3)
(284.7)

(11.81)
(7.14)
(21.00)
(12.70)
(32.81)
(19.86)

(57.8)
(253.5)
(31.1)
(142.3)
(22.2)
(88.9)

(35.6)
(169.0)
(22.2)
(93.4)
(13.3)
(62.3)

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate
lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated
load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.

COLUMN LOADING
Unbraced
Height
In.

mm

12

(305)

24

(609)

36

(914)

36

(1219)

60

(1524)

Channel
Style
B72
B72A
B72
B72A
B72
B72A
B72
B72A
B72
B72A

Max. Column Loading K = .80
Loaded@
Loaded@
C.G.
Slot Face

Max. Column Loading (Loaded @ C.G.)
K = .65

Lbs.

N

Lbs.

N

Lbs.

N

1598
3600
701
2710
313**
1421
177**
799
113**
512**

(7108)
(16013)

539
986
320
802
188
569
122
404
85
298

(2397)
(4386)

1712
3700
1050
3113
473
2135
267**
1211
171**
775

(7615)
(16458)

(3118)
(12054)
(1392)
(6321)
(787)
(3554)
(502)
(2277)

(1423)
(3567)
(836)
(2531)
(542)
(1797)
(378)
(1325)

(4670)
(13847)
(2104)
(9497)
(1187)
(5387)
(760)
(3447)

K = 1.0
Lbs.

N

1410 (6272)
3433 (15271)
450
(2001)
2043 (9088)
201** (894)
909
(4043)
–
–
512** (2277)
–
–
327** (1454)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r

Reference page 200 for general fitting specifications.

202

K = 1.2
Lbs.

N

1181
3229
313**
1421
–
631**
–
355**
–
–

(5253)
(14363)
(1392)
(6321)

–
(2807)

–
(1579)

–
–

Mini Channel Nuts & Fittings
NUTS FOR B62, B72 CHANNEL

SPRING NUT

NUT WITHOUT SPRING

Part Number
B62

B72
Without
Spring

With
Spring

Without
Spring

Thread
Size

N621
N622
N627
N624
BMM-3L
BMM-4L
BMM-5L
BMM-6L

N621WO
N622WO
N627WO
N624WO
BMM-3
BMM-4
BMM-5
BMM-6

N7221
N7222
N7227
N7224
BMM-3S
BMM-4S
BMM-5S
BMM-6S

N621WO
N622WO
N627WO
N624WO
BMM-3
BMM-4
BMM-5
BMM-6

#8-32
#10-24
#10-32
1/4-20
M3.5 x 0.6
M4 x 0.7
M5 x 0.8
M6 x 1

Wt./C
Thickness
.150
.150
.150
.150
.150
.150
.150
.150

(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)

Lbs.

kg

1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0

(.45)
(.45)
(.45)
(.45)

Mini Channel & Fittings

With
Spring

(.45)
(.45)
(.45)
(.45)

MINI FITTINGS
B6202

B6129

B6340

SQUARE WASHER

TWO HOLE SPLICE PLATE

TWO HOLE SPLICE PLATE

• Standard finishes: ZN, GRN
• Wt./C 2 Lbs. (.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 5 Lbs. (2.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 5 Lbs. (2.2 kg)

13/16”

17/8”
(47.6)

(20.6)

15/8”
(41.3)

9/32” (7.1)
DIA.

13/16”
(20.6)

Reference page 200 for general fitting specifications.

203

Mini Fittings
B6141

B600-62

B6557

THREE HOLE SPLICE PLATE

THREE HOLE FLAT
ADAPTER PLATE

THREE HOLE SPLICE PLATE

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 19 Lbs. (8.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

27/16”
(61.9)

215/16”

15/8”
(41.3)

(74.6)

41/8”
(104.8)

B22

B62
13/16”

Mini Channel & Fittings

(20.6)

B6341

B6138

B6139

FOUR HOLE
SPLICE PLATE

TWO HOLE SWIVEL PLATE

THREE HOLE
SWIVEL PLATE

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)

211/16”

33/4”
(95.2)

(68.2)

17/8”

4”

17/8”
(47.6)

(47.6)

(101.6)

B6504

B6140

B6143

FOUR HOLE SPLICE PLATE

THREE HOLE CORNER PLATE

FOUR HOLE CORNER PLATE

• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 8 Lbs. (3.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

17/8”
(47.6)

15/8”
(41.3)

17/8”
(47.6)

17/8”
(47.6)

17/8”
(47.6)

13/16”
(20.6)

215/16”
(74.6)

Reference page 200 for general fitting specifications.

204

Mini Fittings
B6133

B6132

B6135

FOUR HOLE TEE PLATE

FIVE HOLE CROSS PLATE

• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 13 Lbs. (5.9 kg)

THREE HOLE CORNER
GUSSET PLATE
• Standard finishes: ZN, GRN
• Wt./C 9 Lbs. (4.1 kg)

215/16”

17/8”

17/8”
(47.6)

(74.6)

(47.6)

215/16”
(74.6)

17/8”
(47.6)

215/16”
(74.6)

B6337

B6136

FOUR HOLE
CORNER GUSSET PLATE

THREE HOLE
TEE GUSSET PLATE

FOUR HOLE
TEE GUSSET PLATE

• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

17/8”
(47.6)

17/8”

17/8”
(47.6)

(47.6)

215/16”

17/8”

215/16”

(74.6)

(47.6)

(74.6)

B6532

B6101

B6230

FIVE HOLE
TEE GUSSET PLATE

TWO HOLE CORNER ANGLE

TWO HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 5 Lbs. (2.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 5 Lbs. (2.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 22 Lbs. (10.0 kg)

15/16”

13/16”

(23.8)

(20.6)

215/16”
(74.6)

11/4”

215/16”

(31.7)

(74.6)

Reference page 200 for general fitting specifications.

205

11/8”
(28.6)

Mini Channel & Fittings

B6142

Mini Fittings
B6102

B6103

B6232

THREE HOLE CORNER ANGLE

THREE HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 8 Lbs. (3.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 8 Lbs. (3.6 kg)

THREE HOLE
CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

13/16”
15/16”

(20.6)

17/8”

(23.8)

(47.6)

25/16”
(58.7)

23/16”

11/4”

(55.5)

(31.7)

B6104

B6558

THREE HOLE CORNER ANGLE

FOUR HOLE CORNER ANGLE

FOUR HOLE CORNER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)

Mini Channel & Fittings

B6374

11/8”
(28.6)

13/16”

17/8”

(20.6)

(47.6)

11/4”
(31.7)

25/16”
(58.7)

2”

13/16”

(50.8)

(20.6)

15/8”
(41.3)

B6357

B6239

B6144R&L

FOUR HOLE
OFFSET BENT TEE

FIVE HOLE
OFFSET BENT TEE

FOUR HOLE SHELF BRACKET

• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 14 Lbs. (6.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 19 Lbs. (8.6 kg)

17/8”
(47.6)

215/16”
11/8”

(74.6)

(28.6)

11/8”
(28.6)
215/16”

17/8”
(47.6)

(74.6)

25/16”
(58.7)

(Right shown)
15/16”
(23.8)

Reference page 200 for general fitting specifications.

206

Mini Fittings
B6134R&L

B6234 R&L

B6118

FOUR HOLE CORNER GUSSET

FOUR HOLE CORNER GUSSET

• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

FOUR HOLE
GUSSETTED SHELF ANGLE
• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

17/8”
(47.6)

23/16”
(55.5)

17/8”
(47.6)

17/8”

15/16”
(23.8)

(47.6)

25/16”
(58.7)

25/16”

15/16”

(Left shown)

(58.7)

(23.8)

(Left shown)

B6126

B6127

FIVE HOLE
GUSSETTED SHELF ANGLE

FOUR HOLE GUSSETTED
THREE WAY SHELF ANGLE

FIVE HOLE GUSSETTED THREE
WAY SHELF ANGLE

• Standard finishes: ZN, GRN
• Wt./C 22 Lbs. (10.0 kg)

• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 18 Lbs. (8.1 kg)

13/16”
(20.6)

17/8”
(47.6)

17/8”

25/16”

(47.6)

17/8”

(58.7)

17/8”
(47.6)

(47.6)

11/4”
(31.7)

215/16”

25/16”
(58.7)

(74.6)

B6112

B589-62

FOUR HOLE ADJUSTABLE
CORNER ANGLE

TWO HOLE 90°
ADAPTER ANGLE

• Standard finishes: ZN, GRN
• Wt./C 32Lbs. (14.5 kg)

• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

B62

13/16”
(20.6)

9/32” (7.1) x 3/4”
(19.0) SLOTS

23/16”
(55.6)

27/16”

117/32”

B22

(61.9)

(38.9)

15/16”

4”

(23.8)

(101.6)

15/8”
(41.3)

Reference page 200 for general fitting specifications.

207

15/8”
(41.3)

Mini Channel & Fittings

B6533

Mini Fittings
B6147-B6152

B6154

TWO HOLE OPEN ANGLE

TWO HOLE OPEN ANGLE

B

• Standard finishes: ZN, GRN

• Standard finishes: ZN, GRN
• Wt./C 8 Lbs. (3.6 kg)

13/32”
(10.3)

C
13/32”
(10.3)

123/32”
(43.6)

Wt./C
Part No.

A

B6147
B6148
B6149
B6150
B6151
B6152

1

B
1

82 /2° 2 /32”
75°
21/32”
1
67 /2°
2”
60° 131/32”
521/2° 17/8”
371/2°
2”

C

(51.6)
(51.6)
(50.8)
(50.0)
(47.6)
(50.8)

27

/32”
27
/32”
7
/8”
15/16”
11/16”
29
/32”

Lbs.

13/32”

kg

(10.3)

(21.4)
(22.2)

13/16”

45°

(21.4)

8.0

(30.1)

13/32”

(3.6)

(10.3)

(23.8)
(27.0)
(23.0)

B6162-B6165

B6156-B6161

TWO HOLE OPEN ANGLE

TWO HOLE CLOSED ANGLE

• Standard finishes: ZN, GRN 13
/32”

• Standard finishes: ZN, GRN

17/8”
(47.6)

(10.3)

A

(10.3)

Mini Channel & Fittings

13/32”

A
17/8”
13/32”

B

(47.6)
1
1 /32”
(26.2)

(10.3)

Wt./C
Part No.

Wt./C
Part No.

A
30°
221/2°
15°
71/2°

B6162
B6163
B6164
B6165

Lbs.

kg

8.0

(3.6)

B6156
B6157
B6158
B6159
B6160
B6161

A

B

821/2°

19/32”

(32.5)

75°
671/2°
60°
521/2°
371/2°

15/16”
13/8”
113/32”
115/32”
121/32”

(33.3)
(34.9)

Lbs.

kg

8.0

(3.6)

(35.7)
(37.3)
(42.0)

B6155

B601-62

B6169

TWO HOLE
CLOSED ANGLE

TWO HOLE 45°
ADAPTER ANGLE

TWO HOLE SPLICE
CLEVIS FOR B72

• Standard finishes: ZN, GRN
• Wt./C 8 Lbs. (3.6 kg)

• Standard finishes: ZN, GRN
• Wt./C 14 Lbs. (6.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

B62

13/32”
(10.3)

17/8”
(47.6)

(30.5)

45°
13/32”
(10.3)

B22

113/64”
15/8”

45°

(41.3)

19/16”
(39.7)

15/8”
(41.3)

Reference page 200 for general fitting specifications.

208

B72

17/8”
(47.6)

Mini Fittings
B6168

B6167

B6170

THREE HOLE SPLICE CLEVIS FOR B72

FOUR HOLE SPLICE
CLEVIS FOR B72

TWO HOLE SPLICE
CLEVIS FOR B62

• Standard finishes: ZN, GRN
• Wt./C 16 Lbs. (7.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 24 Lbs. (10.9 kg)

• Standard finishes: ZN, GRN
• Wt./C 17 Lbs. (7.7 kg)

(101.6)

(74.6)

B72

17/8”
(47.6)

4”

215/16”

B62

B72

B6171

B6172

B7116

THREE HOLE SPLICE
CLEVIS FOR B62

FOUR HOLE SPLICE
CLEVIS FOR B62

THREE HOLE U-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 26 Lbs. (11.8 kg)

• Standard finishes: ZN, GRN
• Wt./C 36 Lbs. (16.3 kg)

• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)

(10.3)

4”

215/16”

(101.6)

(74.6)

B62

231/32”

B62

(75.4)

B6107

B6107-62A

B6594

THREE HOLE U-SUPPORT

THREE HOLE U-SUPPORT

FIVE HOLE U-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 12 Lbs. (5.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 16 Lbs. (7.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 13 Lbs. (5.9 kg)

121/32”
15/16” (42.0)
(23.8)

13/16”

15/8”
(41.3)

(20.6)

231/32”
(75.4)

231/32”
(75.4)

317/32”
(89.7)

Reference page 200 for general fitting specifications.

209

Mini Channel & Fittings

13/32”

Mini Fittings
B6173

B6526

B6105

FOUR HOLE CLEVIS

TWO HOLE
OFFSET Z-SUPPORT

TWO HOLE
Z-SUPPORT FOR B62

• Standard finishes: ZN, GRN
• Wt./C 5 Lbs. (2.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 9 Lbs. (4.1 kg)

1/8”
(3.2)

15/16”
(23.8)

13/16”
(20.6)

13/16”

121/32”

(20.6)

(42.0)

13/4”
(44.4)

17/8”
(47.6)

13/16”

Mini Channel & Fittings

(20.6)

B7105

B6110

B6108

TWO HOLE
Z-SUPPORT FOR B72

TWO HOLE
Z-SUPPORT FOR B62A

TWO HOLE
OFFSET Z-SUPPORT

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

• Standard finishes: ZN, GRN
• Wt./C 9 Lbs. (4.1 kg)

• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)

13/4”
(44.4)
13/32”

15/16”

(10.3)

(23.8)

13/4”
17/8”
(47.6)

(44.4)

13/4”
(44.4)

13/16”
(20.6)

B598-62

B6571

TWO HOLE Z-ADAPTER PLATE

EIGHT HOLE WING CONNECTION

• Standard finishes: ZN, GRN
• Wt./C 28 Lbs. (12.7 kg)

• Standard finishes: ZN, GRN
• Wt./C 28 Lbs. (12.7 kg)

13/16”

B62

229/32”

(20.6)

15/8”

(73.8)

23/4”
(69.8)

(41.3)

17/8”
(47.6)
B22

17/8”
(47.6)
13/16”
(20.6)

Reference page 200 for general fitting specifications.

210

Mini Fittings
B6205

B7205

B6211

END CAP FOR B62

END CAP FOR B72

Z-BEAM CLAMP

• Material: ASTM A1008 SS Gr. 33
Type 1
• Standard finishes: ZN, GRN
• Wt./C 3 Lbs. (1.3 kg)

• Material: ASTM A1008 SS Gr. 33
Type 1
• Standard finishes: ZN, GRN
• Wt./C 1 Lb. (.4 kg)

•
•
•
•
•

13/16”

13/32”

(20.6)

(10.3)

5/16”-18 Setscrew
13/16” (20.6) Max.

included
Flange Thickness
Material: ASTM A36
Standard finishes: ZN, GRN
Wt./C 13 Lbs. (5.9 kg)

3/4”
(19.0)

13/16”
(20.6)
1/4”
(6.3)

17/8”
(47.6)

B6409-6, 9

B2350-B2355

BRACKET

ONE HOLE DOUBLE
TUBING STRAP

(20.6) 9/32” (7.1) DIA.

B

• Material: ASTM A1008 SS
Gr. 33 Type 1
• Standard finishes: ZN, GRN

A

25/16”

C

(58.7)

A
Part No.

B62

Part No.

Wt./C
Lbs.
kg

A
6”
9”

B6409-6
B6409-9

B2350
B2351
B2352
B2353
B2354
B2355

(152.4)
(228.6)

28.0
35.0

(12.7)
(15.8)

O.D. Size
A

O.D.Size
B

Wt./C
Lbs.
kg

C

1/4”

(6.3)

1/4”

(6.3) 3/4” (19.0)

3/8”

(9.5)

3/8”

(9.5)

1/2” (12.7)

1/2”

(12.7)

1/4”

(6.3)

3/8”

(9.5)

1/4”

(6.3)

1/2”

(12.7)

(9.5)

1/2”

(12.7)

3/8”

1”
11/4”
7/8”
1”
11/8”

1.2
2.0
2.9
1.6
2.1
2.5

(25.4)
(31.7)
(22.2)
(25.4)
(28.6)

B2308-B2315
ONE HOLE TUBING STRAP
• Material: Sizes 1/4” - 1/2”, ASTM A611 Gr. C
5/8” - 1”, ASTM A1008 SS Gr. 33 Type 1
• Standard finishes: ZN, GRN

O.D. Size
A

Part No.
B2308
B2309
B2310
B2311
B2312
B2313
B2314
B2315

1

(6.3)

5

(7.9)

/4”
/16”
3
/8”
1
/2”
5
/8”
3
/4”
7
/8”
1”

(9.5)
(12.7)
(15.9)
(19.0)
(22.2)
(25.4)

B
11/32”
13/32”
13/16”
121/64”
125/64”
139/64”
151/64”
21/32”

Wt./C
Lbs.
kg

C
(26.2)
(27.8)
(30.1)
(33.7)
(35.3)
(40.9)
(45.6)
(51.6)

.048
.048
.048
.048
.062
.075
.075
.075

(1.2)
(1.2)
(1.2)
(1.2)
(1.6)
(1.9)
(1.9)
(1.9)

1.2
1.4
1.6
1.9
2.7
4.3
4.9
5.2

(.5)
(.6)
(.7)
(.8)
(1.2)
(1.9)
(2.2)
(2.3)

Reference page 200 for general fitting specifications.

211

B
9/32” (7.1) Dia.

13/16”

C

(20.6)

A

(.5)
(.9)
(1.3)
(.7)
(.9)
(1.1)

Mini Channel & Fittings

• Safety Factor of 2
• Uniform Design Load 40 Lbs. (.18 kN)
• Standard finishes: ZN, GRN

13/16”

Continuous Concrete Inserts
Continuous slot Concrete Inserts are designed to
provide a pre-set support system cast in concrete
ceilings, walls, and floors to allow flexibility of
attachment at any point along the channel. This
provides an excellent support system for pipe,
conduit, and cable trays.
Continuous Concrete Inserts, manufactured from
Cooper B-Line’s standard channels, have formed
anchors spaced on 4 inch (101.6 mm) centers. 3/16”
(4.8 mm) nail-holes are provided for securing the
inserts to the forms.
Available in lengths from 3 inches (7.62 cm) to 240
inches (609.6 cm), Concrete Inserts are shipped
complete with end caps and styrofoam filler strips
which prevent seepage of concrete into the insert.
Styrofoam is easily removed by pulling the
convenient pull-tab.

Materials & Finishes*
Finish
Code
PLN
GRN
ZN
GALV
HDG
SS4
SS6

Finish
Plain

Specification
ASTM A1011
33,000 PSI min. yield

Dura-Green
Electro-Plated Zinc
Pre-Galvanized

ASTM B633 SC1 Type III
ASTM A653
33,000 PSI min. yield
Hot-Dipped Galvanized ASTM A123
Stainless Steel Type 304 ASTM A240
Stainless Steel Type 316 ASTM A240

Concrete Inserts

*Unless otherwise noted.

Spot Inserts
Cooper B-Line’s Spot Inserts provide for economical single attachment points with full flexibility of
fastener sizing, but with limited adjustment. These products are made from steel strips in accordance
with ASTM A1011, 33,000 PSI min. yield. Standard finish is electro-plated zinc (ASTM B633).

Special Concrete Inserts
Pre-stressed inserts, inserts with studs welded to the back of the channel, and other types of special
inserts are available from Cooper B-Line.

Test Data
Independent Testing Laboratory test data available upon request.

Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

212

Concrete Inserts

Continuous concrete inserts, installed in the
ceiling, can be used to support trapeze hangers,
suspended pipe racks, cable trays and single or
multiple pipe hangers.
When installed in walls, continuous concrete
inserts can be used as a support for tunnel
stanchions, equipment braces, brackets and pipe
racks.

Concrete Inserts

Use spot inserts for single pipe-support or
trapeze type hangers. Spot Inserts offer full
flexibility of rod and fastener sizings.
Cooper B-Line Channel can be attached to
continuous concrete inserts in walls or ceilings.
Channel can also be attached to concrete walls
and floors with expansion anchors.

Reference page 212 for general fitting and standard finish specifications.

213

Continuous Concrete Inserts
B22I
CONTINUOUS CONCRETE INSERT

15/8”
(41.3)

4”

• Design Load for B22-I-12 thru B22-I-240
(101.6)
is 2,000 lbs. (8.89 kN) per foot of concrete
MATERIAL: 12 Gauge (2.6)
insert length with safety factor of 3 in
11/2”
3000 psi concrete.
(38.1)
• Loads concentrated within the last 2
3/4”
inches (50.8 mm) of concrete inserts
(19.0)
8” (203.2 mm) and longer should not
1
3 /8”
exceed 1,000 lbs. (4.45kN).
(79.4)
• Concrete insert should be secured to the
.188 Knockouts For
forms on 16” (406.4 mm) to 24” (609.6 mm)
Nailing Inserts To
11/16”
intervals.
B22-I-3 THRU
Forms
• B22-I continuous concrete inserts are
(17.4)
B22-I-8
made from B22 channel. Use channel
Styrofoam
25/8” 15/8”
nuts designed for use in B22 channel.
15/8”
Filler
(66.7)
• B22-I concrete inserts are supplied with
(41.3)
(41.3)
styrofoam fillers. B3322 end caps are
furnished with inserts through 8” (203.2 mm)
long, and B205 end caps are furnished
with inserts 12” (304.8 mm) and longer.
• Material: Plain Steel ASTM A1011
15/8”
33,000 PSI min. yield or Pre-Galvanized
(41.3)
Steel ASTM A653SS 33,000 PSI min.
Styrofoam
B3322
yield.
Filler
End Cap
• Finish: Plain, Dura-Green, Pre-Galv,
B205 End Cap
HDG
B22-I-12 THRU B22-I-240

Concrete Inserts

Length
Part No.

in.

B22-I-3
B22-I-4
B22-I-6
B22-I-8

3”
4”
6”
8”

Wt./C
Lbs.

kg

Lbs.

kN

(76)

72
88
120
152

(32.6)

500
800
1000
1200

(2.22)

(101)
(152)
(203)

(39.9)
(54.4)
(68.9)

Length
Part No.
B22-I-12
B22-I-16
B22-I-20
B22-I-24
B22-I-32
B22-I-36
B22-I-40
B22-I-48
B22-I-60
B22-I-72
B22-I-84
B22-I-96
B22-I-108
B22-I-120
B22-I-144
B22-I-168
B22-I-192
B22-I-216
B22-I-240

Design Load

mm

Wt./C

in.

mm

Lbs.

12”
16”
20”
24”
32”
36”
40”
48”
60”
72”
84”
96”
108”
120”
144”
168”
192”
216”
240”

(305)

224
289
353
420
553
620
686
820
1018
1218
1417
1616
1816
2016
2416
2816
3216
3616
4016

(406)
(508)
(609)
(813)
(914)
(1016)
(1219)
(1524)
(1829)
(2133)
(2438)
(2743)
(3048)
(3657)
(4267)
(4877)
(5486)
(6096)

kg
(101.6)
(131.1)
(160.1)
(190.5)
(250.8)
(281.2)
(311.1)
(371.9)
(461.7)
(552.5)
(642.7)
(733.0)
(823.7)
(914.4)
(1095.9)
(1277.3)
(1458.7)
(1640.2)
(1821.6)

Reference page 212 for general fitting and standard finish specifications.

214

(3.56)
(4.45)
(5.34)

Continuous Concrete Inserts
B32I

4”

CONTINUOUS CONCRETE INSERT

(101.6)
• Design Load for B32-I-12 thru B32-I-240
is 2,000 lbs. (8.89 kN) per foot of concrete
MATERIAL: 12 Gauge (2.6)
insert length with safety factor of 3 in
11/2”
(38.1)
3000 psi concrete.
• Loads concentrated within the last 2
inches (50.8 mm) of concrete inserts
27/8”
8” (203.2 mm) and longer should not
(73.0)
exceed 1,000 lbs. (4.45kN).
• Concrete insert should be secured to the
forms on 16” (406.4 mm) to 24” (609.6 mm)
B32-I-3 THRU
11/16”
intervals.
B32-I-8
(17.4)
• B32-I continuous concrete inserts are
made from B32 channel. Use channel
25/8”
13/8”
nuts designed for use in B32 channel.
(66.7)
(34.9)
• B32-I concrete inserts are supplied with
styrofoam fillers. B3332 end caps are
furnished with inserts through 8” (203.2 mm)
long, and B206 end caps are furnished
15/8”
with inserts 12” (304.8 mm) and longer.
(41.3)
3
1 /8”
• Material: Plain Steel ASTM A1011
(34.9)
33,000 PSI min. yield or Pre-Galvanized
Styrofoam
Steel ASTM A653SS 33,000 PSI min.
B3332
Filler
yield.
End Cap
• Finish: Plain, Dura-Green, Pre-Galv,
B206 End Cap
HDG

15/8”
(41.3)
3/4”
(19.0)

.188 Knockouts For
Nailing Inserts To
Forms
Styrofoam
Filler

B32-I-12 THRU B32-I-240

Length
Part No.

in.

B32-I-3
B32-I-4
B32-I-6
B32-I-8

3”
4”
6”
8”

B32-I-12
B32-I-16
B32-I-20
B32-I-24
B32-I-32
B32-I-36
B32-I-40
B32-I-48
B32-I-60
B32-I-72
B32-I-84
B32-I-96
B32-I-108
B32-I-120
B32-I-144
B32-I-168
B32-I-192
B32-I-216
B32-I-240

Design Load

Lbs.

kg

Lbs.

kN

(76)

65
80
108
137

(29.5)

500
800
1000
1200

(2.22)

(101)
(152)
(203)

(36.3)
(49.0)
(62.1)

Wt./C
in.

mm

Lbs.

12”
16”
20”
24”
32”
36”
40”
48”
60”
72”
84”
96”
108”
120”
144”
168”
192”
216”
240”

(305)

202
262
316
376
496
556
616
736
915
1095
1274
1453
1633
1813
2173
2533
2893
3253
3613

(406)
(508)
(609)
(813)
(914)
(1016)
(1219)
(1524)
(1829)
(2133)
(2438)
(2743)
(3048)
(3657)
(4267)
(4877)
(5486)
(6096)

kg
(91.6)
(118.8)
(143.3)
(170.5)
(225.0)
(252.2)
(279.4)
(333.8)
(415.0)
(496.7)
(577.9)
(659.0)
(740.7)
(822.3)
(985.6)
(1148.9)
(1312.2)
(1475.5)
(1638.8)

Reference page 212 for general fitting and standard finish specifications.

215

(3.56)
(4.45)
(5.34)

Concrete Inserts

Length
Part No.

Wt./C
mm

Continuous Concrete Inserts
B52I

4”

CONTINUOUS CONCRETE INSERT

(101.6)

• Design Load for B52-I-12 thru B52-I-240
is 1,500 lbs. (6.67 kN) per foot of concrete
MATERIAL: 12 Gauge (2.6)
11/2”
insert length with safety factor of 3 in
(38.1)
3000 psi concrete.
3/4”
• Loads concentrated within the last 2
(19.0)
inches (50.8 mm) of concrete inserts
25/16”
8” (203.2 mm) and longer should not
(58.7)
exceed 750 lbs. (3.33kN).
.188 Knockouts For
• Concrete insert should be secured to the
Nailing Inserts To
11/16”
forms on 16” (406.4 mm) to 24” (609.6 mm)
Forms
intervals.
(17.4)
B52-I-3
THRU
• B52-I continuous concrete inserts are
13/16”
B52-I-8
made from B52 channel. Use channel
Styrofoam
(20.6)
nuts designed for use in B52 channel.
9/16”
Filler
2
• B52-I concrete inserts are supplied with
(65.1)
styrofoam fillers. B3352 end caps are
furnished with inserts through 8” (203.2 mm)
long, and B220 end caps are furnished
with inserts 12” (304.8 mm) and longer.
15/8”
13/16” (41.3)
• Material: Plain Steel ASTM A1011
(20.6)
33,000 PSI min. yield or Pre-Galvanized
B3352
Styrofoam
Steel ASTM A653SS 33,000 PSI min.
End Cap
Filler
yield.
B220 End Cap
• Finish: Plain, Dura-Green, Pre-Galv,
B52-I-12 THRU B52-I-240
HDG

Concrete Inserts

Length

Wt./C

Design Load

Part No.

in.

mm

Lbs.

kg

Lbs.

kN

B52-I-3
B52-I-4
B52-I-6
B52-I-8

3”
4”
6”
8”

(76)

53
63
85
106

(24.0)

400
500
750
1000

(1.78)

(101)
(152)
(203)

(28.6)
(38.5)
(48.1)

Length
Part No.
B52-I-12
B52-I-16
B52-I-20
B52-I-24
B52-I-32
B52-I-36
B52-I-40
B52-I-48
B52-I-60
B52-I-72
B52-I-84
B52-I-96
B52-I-108
B52-I-120
B52-I-144
B52-I-168
B52-I-192
B52-I-216
B52-I-240

in.

12”
16”
20”
24”
32”
36”
40”
48”
60”
72”
84”
96”
108”
120”
144”
168”
192”
216”
240”

Wt./C
mm
(305)
(406)
(508)
(609)
(813)
(914)
(1016)
(1219)
(1524)
(1829)
(2133)
(2438)
(2743)
(3048)
(3657)
(4267)
(4877)
(5486)
(6096)

Lbs.

157
202
237
282
373
419
464
556
692
829
965
1107
1237
1374
1648
1922
2196
2470
2744

kg
(71.2)
(91.6)
(107.5)
(127.9)
(169.2)
(190.0)
(210.4)
(252.2)
(313.9)
(376.0
(437.7)
(502.1)
(561.1)
(623.2)
(747.5)
(871.8)
(996.1)
(1120.4)
(1244.6)

Reference page 212 for general fitting and standard finish specifications.

216

(2.22)
(3.33)
(4.45)

15/8”
(41.3)

Spot Inserts
N2500

B2500

11/4”
(31.7)

SPOT INSERT

INSERT SQUARE NUT

•
•
•
•

• For use in B2500 Spot Insert
• Material: Steel ASTM A36
• Standard finish: ZN

Design Load 600 Lbs. (2.67 kN)
Safety Factor of 5
Order N2500 Nuts Separately
Material: Steel ASTM A1011
33,000 PSI min. yield
• Standard finish: ZN
• Wt./C 46 Lbs. (20.8 kg) 2”

Thread
Size

(50.8)

31/4”

Part No.

(82.5)

N2500-1/4
N2500-5/16
N2500-3/8
N2500-1/2
N2500-5/8
N2500-3/4
N2500-7/8

Material:
12 Gauge (2.6)

11/2”

19/16”

(38.1)

(65.0)

1/4”-20
5/16”-18
3/8”-16
1/2-13
5/8”-11
3/4”-10
7/8”-9

B2503

B2505 THRU B2508

HEAVY DUTY SPOT INSERT

SPOT INSERT

• Designed for use where heavy loads are
required in curtain wall applications
• Design Load is 5000 Lbs. (22.2 kN) with a
Safety Factor of 3
• Loading based on two N225 channel nuts
spaced 3” (76.2 mm) on center and a
minimum of 2” (50.8 mm) from the end
of the insert
• Styrofoam end caps prevent concrete
seepage into the channel
• 12” (304.8 mm) long insert is anchored
into the concrete at a depth of
51/2” (139.7 mm)
• Material: 12 Gauge (2.6 mm) thick steel
• Standard finish: ZN
• Wt./C 42 Lbs. (19.0 kg)

• Safety Factor of 5
• To support 10” (250) pipe use B2505
insert with 5/8”-11 Channel Nuts.
• To support up to and including 8”
(200) pipes use B2506, B2507 and
B2508 inserts with the desired
Channel Nuts.
• Standard finish: ZN
Part No.

Channel End Cap
Style Part No.
B22
B32
B42
B52

B2505
B2506
B2507
B2508

B3322
B3332
B3342
B3352

5/16”
(7.9)

11/4”
(31.7)

Thread
Size

Wt./C
Lbs.

kg

13
13
12
12
11
10
9

(5.9)
(5.9)
(5.4)
(5.4)
(5.0)
(4.5)
(4.1)

Channel
Size

End Caps

25/8”
(66.7)
51/16”
(128.6)

Design Load

Maximum
Pipe Size

Lbs.

kN

1200
1000
1000
1000

(5.34)
(4.45)
(4.45)
(4.45)

10”
8”
8”
8”

(250)
(200)
(200)
(200)

Wt./C
Lbs.

kg

96
88
77
69

(43.5)
(39.9)
(34.9)
(31.3)

Concrete Inserts

B2501
LIGHT DUTY SPOT INSERT

51/2”
(139.7)

5/32” (4.0)

15/8”
(41.3)

2”
(50.8)

15/8”

DIA. NAIL
HOLES

• Safety Factor of 2
• The concrete attachment problem solver for
light duty applications.
• Fast and easy applications.
• No concrete leakage problems.
• One piece unitized construction.
• Color coded cap on thread for rod size
identification and to prevent concrete seepage.
(1/4”-Yellow, 3/8”-Red, 1/2”-Blue)

A

H

(41.3)

8”

11/4”
(31.7)

(203.2)
Design Load

12”
(304.8)

Styrofoam End
Caps

Part No.
& Size
B2501-1/4
B2501-3/8
B2501-1/2

Height
Height
A
H
7/8”
(61.9)
(22.2)
27/16”
(77.8) 17/8” (47.6)
31/16”
(104.8) 17/8” (47.6)
41/8”

Design Load
kN

Lbs.

kN

250
610
880

(1.11)

16
22
26

(7.2)

Reference page 212 for general fitting and standard finish specifications.

217

Wt./C

Lbs.

(2.71)
(3.91)

(9.9)
(11.7)

Insert Accessories
B205, B206, B220

B3322, B3332, B3342, B3352

X TYPE END CAPS

Y TYPE END CAPS

• UL listed for raceway use only
• Material: 12 Gauge (2.6)
• Standard finish: ZN

• UL listed for raceway use only
• Material: 14 Gauge (1.9)
• Standard finish: ZN
3/8” (9.5)
DIA.

A

A
1”

113/16”

(25.4)

(46.0)

Part No.

Use
With

B205
B206
B220

B22
B32
B52

Wt./C
A
121/32”
113/32”
27/32”

(42.0)
(35.7)
(21.4)

B380
JOINT SPLICE PLATE
• Used at splice points to prevent
concrete seepage in long
continuous runs of concrete
A
inserts.
• Material: 18 Gauge (1.2)
1/16”
• Standard finish: GALV

Lbs.

kg

10
8
4

(4.5)
(3.6)
(1.8)

Part No.

Use
With

B3322
B3332
B3342
B3352

B22
B32
B42
B52

25/8”
(66.7)

Wt./C
A
1.270
1.000
.645
.460

(32.2)
(25.4)
(16.4)
(11.7)

Lbs.

kg

15
15
15
15

(6.8)
(6.8)
(6.8)
(6.8)

B22IFS-B52IFS

13/4”
(44.1)

STYROFOAM FILLER STRIP
29/32”
(23.0)

15/8”
(41.3)

(1.6)

B
A

Concrete Inserts

Part No.
B380-22
B380-32
B380-42
B380-52

Use
With
B22
B32
B42
B52

Wt./C
A
15/8”

Lbs.
(41.3)

13/8”

(34.9)

1”
13/16”

(25.4)
(20.6)

11
10
9
7

A

kg
(5.0)
(4.5)
(4.1)
(3.2)

Wt./C

Part No.

Ft.

mm

B22-IFS
B32-IFS
B52-IFS

4’
4’
4’

(1219)
(1219)
(1219)

B
17/32”
1”
21/32”

(309)
(254)
(167)

Lbs.

kg

10
9
7

(4.5)

PIPE SLEEVE FASTENERS
• Allows for rigid attachment
of pipe sleeves to wall and floor
forms for concrete pouring.
• Accommodates Schedule 40,
Schedule 80, or 5/16" (8) and
smaller wall thickness.
• Simply installed with a hammer.

Part No.
BD40

Sleeve
Diameter
All Dia.

BD40

BE-5-8 & BE-9-12

Wall
Thickness
5/16”

& under

BE-5-8

6”

Schedule 80 pipe

BE-9-12

9” - 14”

Schedule 80 pipe

Reference page 212 for general fitting and standard finish specifications.

218

(4.1)
(3.2)

Anchors
WEDGE ANCHOR
Catalog
Number

Thread
Size

AWA-37-225
AWA-37-275
AWA-37-300
AWA-37-350
AWA-37-375
AWA-37-500
AWA-50-275
AWA-50-375
AWA-50-450
AWA-50-550
AWA-50-700

3/8"-16

3/8"

3/8"-16

3/8"

Thread
Length

Size
in.

21/4"

x
x 23/4"
3/8" x 3"
3/8" x 31/2"
3/8" x 33/4"
3/8" x 5"
1/2" x 23/4"
1/2" x 33/4"
1/2" x 41/2"
1/2" x 51/2"
1/2" x 7"

3/8"-16
3/8"-16
3/8"-16
3/8"-16
1/2"-13
1/2"-13
1/2"-13
1/2"-13
1/2"-13

Drill/Hole
Size

mm

in.

mm

(9 x 57)
(9 x 70)
(9 x 76)
(9 x 89)
(9 x 95)
(9 x 127)
(13 x 70)
(13 x 95)
(13 x 114)
(13 x 140)
(13 x 178)

11/4"

(32)
(41)
(47)
(60)
(66)
(98)
(35)
(60)
(79)
(105)
(143)

15/8"
17/8"
23/8"
25/8"
37/8"
13/8"
23/8"
31/8"
41/8"
55/8"

Load Cap.
Tension*

Load Cap.
Shear*

in.

mm

lbs.

kN

lbs.

kN

3/8”

(9)

760

(3.38)

940

(4.18)

1/2”

(13)

1390 (6.18) 1700 (7.56)

Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.

HOLLOW BASE DROP-IN ANCHORS
Catalog
Number

Rod
Size

Overall
Length

ADH-25
ADH-37
ADH-50
9323
9343
9353

1/4”-20

in.
3/8”-16
1/2”-13
1/4”
3/8”
1/2”

7/8”

Sleeve
Length

mm
(22)

in.

15/16” (33)
13/4” (44)
-------

Drill/Hole
Diameter

5/8”

mm
(16)

3/8”

in.

mm
(9)

15/16”

(24)

5/8”

(16)

11/4”

(32)

3/4”

(19)

----

--

----

--

---

---

Load Cap.
Tension*
lbs.

285
520
1005
----

kN
(1.27)
(2.31)
(4.47)
----

Load Cap.
Shear*
lbs.

300
640
1005
----

kN
(1.33)
(2.84)
(44.70)
----

Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.

RAPID ROD™ HANGERS FOR CONCRETE
Rod

Shank Size

Drill/Hole

Size

& Length

Size

in.

Load Cap.
Tension*

mm

in.

mm

Lbs.

kN

485

(2.16)

Load Cap.
Shear*
Lbs.

kN

610

(2.71)

ARC-25-125

1/4”-20

1/4”

x 11/4”

(6 x 32)

1/4”

(6)

ARC-37-150

3/8”-16

1/4”

x

11/2”

(6 x 38)

1/4”

(6)

650

(2.89)

660

(2.93)

ARC-50-275

1/2”-13

3/8”

x 23/4”

(9 x 70)

1/4”

(6)

1510

(6.71)

1580

(7.03)

Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.

RAPID ROD™ HANGERS FOR STEEL
Catalog
Number

Rod
Size

Shank Size
& Length
in.

Load Cap.
Tension* In 12 Ga.

mm

Lbs.

x 1”

(6 x 25)

390

(1.75)

1260

(5.60)

x 1” *

(6 x 25)

512

(2.28)

1260

(5.60)

11/2”

(6 x 38)

390

(1.75)

1260

(5.60)

x 11/2”

(6 x 38)

512

(2.28)

1260

(5.60)

(6 x 51)

390

(1.75)

1260

(5.60)

ARS-25-100

1/4”-20

1/4”

ARS-37-100HN

3/8”-16

1/4”

ARS-37-150

3/8”-16

1/4”

x

ARS-37-150HN

3/8”-16

1/4”

ARS-37-200

3/8”-16

1/4”

x 2”

kN

Load Cap.
Tension* In 1/4”
Lbs.

kN

Note: Loads shown for ASTM A36 beams and ASTM A572 steel purlins include a safety factor of 4.
For UL and FM listings, steel rapid rod must be installed with a retaining nut.
Reference page 212 for general fitting and standard finish specifications.

219

Concrete Inserts

Catalog
Number

Anchors
PLASTIC SCREW ANCHORS
• Kits contain 100 anchors, 100 screws, and 1 concrete drill bit
Catalog

Screw

Number

Size
#8 x 1”
#10 x 1”
#12 x 1”

APC-8K
APC-10K
APC-12K

Load Cap.
Tension*

Load Cap.
Shear*

Lbs.

kN

Lbs.

110
140
140

(0.49)

kN

70
90
90

(0.62)
(0.62)

(0.31)
(0.40)
(0.40)

Note: Based on concrete compression strength of 4,000 psi using
applied safety factor of 4.

WOOD-KNOCKER™ ANCHORS
Catalog
Number

Rod
Size

ACPW-25
ACPW-37
ACPW-50
ACPW-62
ACPW-75

1/4”-20

Color

Insert Thread
Length
in.

3/8”-16
1/2”-13
5/8”-11
3/4”-10

Brown
Green
Yellow
Red
Purple

3/8”

mm
(9)

5/8”

(16)

11/16”

(17)

15/16”

(24)

11/8”

(28)

Overall
Length
in.

17/8”
17/8”
17/8”
17/8”
17/8”

mm
(47)
(47)
(47)
(47)
(47)

Load Cap.
Tension*
lbs.

Load Cap.
Shear*

kN
(4.13)

930
1200
1200
1160
1160

(5.33)
(5.33)
(5.16)
(5.16)

lbs.

370
1330
1840
2800
2800

kN
(1.64)
(5.91)
(8.18)
(12.45)
(12.45)

Notes: Based on normal weight concrete with minimum compression strength of 3,000 psi.
Allowable load capacities are calculated using applied safety factor of 4.
Minimum embedment is 2” (51mm).
Wood-Knocker™ is a trademark of Powers® Fasteners

Concrete Inserts

BANG-IT™ ANCHORS
Catalog
Number

Rod
Size

ACPD-25
ACPD-37
ACPD-50
ACPD-62
ACPD-75
ACPD-87

1/4”-20

Color

Insert Thread Upper Deck
Lower Deck Upper Deck Lower Deck
Length
Tension Load* Tension Load* Shear Load* Shear Load*
in.

3/8”-16
1/2”-13
5/8”-11
3/4”-10
7/8”-9

Brown 3/8”
Green 5/8”
Yellow 11/16”
Red 15/16”
Purple 11/8”
Black 15/16”

mm

lbs.

kN

lbs.

kN

lbs.

kN

lbs.

kN

(9)

1112
1435
1775
2200
2200
2200

(4.94)

830
830
830
990
990
990

(3.69)

625
837
837
837
837
837

(2.78)

625
837
837
837
837
837

(2.78)

(16)
(17)
(24)
(28)
(33)

(6.38)
(7.89)
(9.78)
(9.78)
(9.78)

(3.69)
(3.69)
(4.40)
(4.40)
(4.40)

(3.72)
(3.72)
(3.72)
(3.72)
(3.72)

Notes: Based on normal weight concrete with minimum compression strength of 3,000 psi.
Allowable load capacities are calculated using applied safety factor of 4.
Minimum insert spacing of 12” (305mm), minimun end spacing of 12” (305mm).
Minimum embedment is 2” (51mm).
Length of sleeve is 33/8” (86mm.
Bang-It™ is a trademark of Powers® Fasteners

Reference page 212 for general fitting and standard finish specifications.

220

(3.72)
(3.72)
(3.72)
(3.72)
(3.72)

Anchors
1/4”

CONCRETE SCREWS

Catalog
Number

Rod
Size
in.

ACS-125H
ACS-175H
ACS-225H
ACS-275H
ACS-325H

Drill/Hole
Size

Load Cap.
Tension*

Load Cap.
Shear*

mm

in.

mm

lbs.

kN

lbs.

kN

1/4”

11/4”

(6 x 32)

3/16”

(5)

(6 x 44)

3/16”

(5)

(6 x 57)

3/16”

(5)

(6 x 70)

3/16”

(5)

(6 x 82)

3/16”

(5)

205
205
205
205
205

(0.91)

13/4”
21/4”
23/4”
31/4”

265
265
265
265
265

(1.18)

1/4”

x
x
1/4” x
1/4” x
1/4” x

(1.18)
(1.18)
(1.18)
(1.18)

(0.91)
(0.91)
(0.91)
(0.91)

Note: Based on 1” (25mm) embedment with concrete compression strength of 4,000 psi using applied safety factor of 4.
Consult factory for loading of other embedment depths.

SELF-TAPPING MACHINE SCREW ANCHOR
Catalog
Number
ATM-37

Rod
Size
3/8”-16

Thread
Depth

Drill/Hole
Size

Load Cap.
Tension*

in.

mm

in.

mm

Lbs.

11/16”

(17)

1/2”

(13)

540

Load Cap.
Shear*

kN

Lbs.

kN

825

(3.67)

(2.40)

Note: Based on concrete compression strength of 4,000 psi in uncracked concrete using applied safety factor of 4.
Minimun concrete thickness 4” (101mm) with minimum embedment of 15/8” (41mm)

WALL SCREWS
Catalog
Number

Head
Type

Thread
Depth
in.

Minimum
Embedment

Load Cap.
Tension*

mm

in.

mm

Lbs.

Load Cap.
Shear*

kN

Lbs.

kN

AWS-CH

Combo

3/16”

x 11/4”

(5 x 32)

3/4”

(19)

90

(0.40)

260

(1.15)

AWS-OH

Oval

3/16”

x 11/4”

(5 x 32)

3/4”

(19)

90

(0.40)

260

(1.15)

Pan

3/16”

11/4”

(5 x 32)

3/4”

(19)

90

(0.40)

260

(1.15)

AWS-PH

x

SLEEVE TYPE EXPANSION ANCHORS
Catalog
Number

Anchor Size
& Length
in.

ASA-37-187HN
ASA-37-300HN
ASA-37-400HN
ASA-50-225HN
ASA-50-300HN
ASA-50-400HN
ASA-50-525HN
ASA-50-600HN

3/8”

mm

x 17/8” (9 x 47)
3/8” x 3”
(9 x 76)
3/8” x 4”
(9 x 101)
1/2” x 21/4” (13 x 57)
1/2” x 3”
(13 x 76)
1/2” x 4”
(13 x 101)
1/2” x 51/4” (13 x 133)
1/2” x 6”
(13 x 152)

Thread
Length

Drill/Hole
Minimum
Diameter Embedment

Load Cap.
Tension*

Load Cap.
Shear*

in.

mm

in.

mm

in.

mm

lbs.

kN

lbs.

kN

15/8”
15/8”
15/8”
21/4”
21/4”
21/4”
21/4”
21/4”

(41)

3/8”

(9)

(41)

(9)

(41)

3/8”

(9)

(57)

1/2”

(13)

(57)

1/2”

(13)

(57)

1/2”

(13)

(57)

1/2”

(13)

(57)

1/2”

(13)

610
610
610
1055
1055
1055
1055
1055

(2.71)

3/8”

670
670
670
1255
1255
1255
1255
1255

(2.98)

(41)

15/8”
15/8”
15/8”
21/4”
21/4”
21/4”
21/4”
21/4”

(41)
(41)
(57)
(57)
(57)
(57)
(57)

(2.98)
(2.98)
(5.58)
(5.58)
(5.58)
(5.58)
(5.58)

Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.

Reference page 212 for general fitting and standard finish specifications.

221

(2.71)
(2.71)
(4.69)
(4.69)
(4.69)
(4.69)
(4.69)

Concrete Inserts

Note: Based on concrete compression strength of 4,000 psi. Allowable load capacities are calculated using an
applied safety factor of 4.

Slotted Angle
Cooper B-Line Slotted Angle is an all-purpose
framing system, roll formed from high strength
steel strips. It is designed to be used as
economical shelving, racks or electrical and
mechanical supports. The unique pattern of
horizontal and vertical slots permits full flexibility.
Three basic sizes are available for light, medium,
and heavy duty applications.

Materials & Finishes*
Finish
Code
PLN
ZN
GRN
GALV

Finish
Plain

Specification
ASTM A1011
33,000 PSI min. yield
Electro-Plated Zinc ASTM B633 SC3
Dura-Green
Pre-Galvanized
ASTM A653
33,000 PSI min. yield

*Unless otherwise noted.

Lengths
Standard lengths are 10’ (3.05 m) and 12’ (3.66 m).
Slotted Angle is shipped in ten piece bundles
complete with 75 pieces of 3/8” x 3/4” (19mm) hex
head cap screws and 3/8” hex nuts.

Metric

Slotted Angle

Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in
millimeters.

222

Slotted Angle Sizes
13/32” (10.3) x 9/16” (14.3)

SA158
•
•
•
•

Transverse Slots

14 Gauge (1.9)
15/8” x 15/8”
Standard finishes: ZN, GRN
Wt./Ft. .66 Lbs. (.98 kg/m)

13/32” (10.3) x 9/16” (14.3)

Longitudinal Slots

137/64”
(40.1)
3/4”
(19.0)

11/2”
(38.1)

3/4”
(19.0)

10’ (3.05 m)
12’ (3.66 m)

137/64”
(40.1)

13/32” (10.3) x 9/16” (14.3)

SA276
•
•
•
•

Transverse Slots

14 Gauge (1.9)
15/8” x 23/8”
Standard finishes: ZN, GRN
Wt./Ft. .78 Lbs. (1.17 kg/m)

13/32” (10.3) x 9/16” (14.3)

Longitudinal Slots

137/64”
(40.1)
3/4”
(19.0)

11/2”
(38.1)
3/4”
(19.0)

10’ (3.05 m)
12’ (3.66 m)

25/16”
(58.7)

13/32” (10.3) x 9/16” (14.3)

SA318
•
•
•
•

Transverse Slots

12 Gauge (2.6)
15/8” x 31/8”
Standard finishes: ZN, GRN
Wt./Ft. 1.32 Lbs. (1.96 kg/m)

13/32” (10.3) x 9/16” (14.3)

Longitudinal Slots

137/64”
(40.1)

3/4” 11/2”
(19.0) (38.1)

13/32” (10.3) Holes On

3” (76.2) Centers

10’ (3.05 m)
12’ (3.66 m)

33/32”
(78.6)

Reference page 222 for general fitting and standard finish specifications.

223

Slotted Angle

3/4”
(19.0)

Slotted Angle Beam Loading & Combinations
BEAM SECTIONS
A

B

Single Piece (Up)

C

Single Piece (Level)

F

Single Piece (Down)

G

Z-Section

D

Single Piece with
Stiffener

H

Broad Channel

Broad Channel with
Stiffener

Z-Section with
Stiffener

K

T-Section

Narrow Channel

H

J

I

E

T-Section with
Stiffener

L

J-Section

I-Section

For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A
number of these combinations are illustrated above. Refer to the following table for load capacities of these combinations.
Beam Sections illustrated are single sections, except J, N, and P.

BEAM LOADING
SA158-15/8” (41.3) x 15/8” (41.3) x 14 Gauge (1.9)

Slotted Angle

24” (609 mm) 36” (914 mm)

Beam Span
48” (1219 mm) 60” (1524 mm)

72” (1829 mm)

84” (2133 mm) 96” (2438 mm)

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

A

825

(3670)

525

(2335)

340

(1512)

230

(1023)

180

(800)

–

–

–

–

B

1100

(4893)

800

(3558)

540

(2402)

370

(1646)

250

(1112)

–

–

–

–

C

1100

(4893)

800

(3558)

540

(2402)

370

(1646)

250

(1112)

–

–

–

–

D

1300

(5782)

900

(4003)

625

(2780)

450

(2001)

330

(1468)

275

(1223)

200

(889)

G

1900

(8451)

1360

(6049)

1050

(4670)

825

(3670)

660

(2936)

530

(2357)

400

(1779)

H

2300

(10231)

1850

(8229)

1450

(6450)

1100

(4893)

950

(4226)

800

(3558)

700

(3114)

I

2200

(9786)

1650

(7339)

1225

(5449)

930

(4137)

700

(3114)

550

(2446)

450

(2001)

Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span,
multiply uniform load by 0.5.
Reference page 222 for general fitting and standard finish specifications.

224

Slotted Angle Beam Loading
BEAM LOADING
SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9)
Beam Span
24” (609 mm) 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm)
Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

A

–

–

680 (3025)

450 (2001)

340 (1512)

B

–

–

830 (3692)

550 (2446)

C

–

–

D

–

E

–

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

–

–

–

–

–

–

–

–

–

–

360 (1601)

210

(934)

150

(667)

–

–

–

–

–

–

1540 (6850) 1060 (4715)

800 (3558)

610

(2713)

480

(2135)

340

1512

250

(1112)

–

–

–

1880 (8362) 1280 (5694)

970 (4315)

820

(3647)

650

(2891)

550 (2446)

420

(1868)

340

(1512)

–

2110 (9386) 1730 (7695) 1460 (5775) 1250 (5560)

1090 (4848)

920 (4092)

820

(3647)

680

(3025)

710

(3158)

550 (2446)

420

(1868)

320

(1423)

1040 (4626)

820 (3647)

640

(2847)

490

(2179)

3480 (15480) 2430 (10809) 1890 (8407) 1620 (7206)

1430 (6361) 1270 (5649)

1160

(5160)

1030 (4581)

5780 (25711) 3640 (16191) 2820 (12544) 2200 (9786) 1700 (7562)

1350 (6005) 1060 (4715)

850

(3781)

680

(3025)
(3114)

F

4290 (19083) 2510 (11165) 1790 (7962) 1330 (5916)

G

4320 (19216) 3000 (13344) 2140 (9519) 1600 (7117) 1290 (5738)

H
I

–

–

980

(4359)

J

–

–

3660 (16280) 2840 (12633) 2230 (9919) 1720 (7651)

1360 (6049) 1090 (4848)

874

(3888)

700

K

–

–

4910 (21841) 3830 (17036) 3000 (13344) 2550 (11343) 2190 (9741) 1880 (8362)

1640

(7295)

1430 (6361)

L

–

–

6360 (28290) 4590 (20417) 3470 (15435) 2910 (12944) 2550 (11343) 2240 (9964)

2010

(8941)

1840 (8185)

Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span,
multiply uniform load by 0.5.

BEAM LOADING
SA318-15/8” (41.3) x 31/8” (79.4) x 12 Gauge (2.6)
Beam Span
24” (609 mm) 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm)
Lbs.

N

A

–

–

1140 (5071)

850 (3781)

690 (3069)

B

–

–

1250 (5560)

850 (3781)

600 (2669)

C

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

–

–

–

–

–

400

(1779)

–

–

–

790

(3514)

4800 (21351) 2750 (12232) 1800 (8007) 1280 (5694) 1000 (4448)

N

Lbs.

N

Lbs.

–

–

–

–

–

–

–

–

–

–

–

–

–

610 (2713)

N

–

–

–

3900 (17348) 2690 (11966) 2050 (9119) 1700 (7562)

1480 (6583) 1280 (5694)

1100 (4893)

960 (4270)

E

–

–

4160 (18504) 3560 (15835) 3130 (13923) 2750 (12232) 2400 (10676) 2170 (9652)

1950 (8674)

1780 (7918)

1750 (7784) 1350 (6005)

1020 (4537)

700 (3114)

G 10600 (47151) 6050 (26912) 4440 (19750) 3330 (14812) 2670 (11877) 2120 (9430) 1660 (7384)

1210 (5382)

1000 (4448)

6100 (27134) 4620 (20551) 3670 (16325) 3110 (13834) 2680 (11921) 2380 (10587) 2100 (9341)

1950 (8674)

13700 (60940) 7800 (34696) 5900 (26244) 4600 (20462) 3800 (16903) 3190 (14190) 2630 (11699) 2170 (9652)

1810 (8051)

F

H
I

8180 (36386) 5000 (22241) 3650 (16236) 2750 (12232) 2200 (9786)

–

–

J

–

–

7900 (35141) 6300 (28024) 5050 (22463) 4070 (18104) 3240 (14412) 2630 (11699) 2170 (9652)

K

–

–

10050 (44704) 8000 (35586) 6320 (28113) 5350 (23798) 4650 (20684) 4040 (17971) 3520 (15658) 3120 (13878)

L

–

–

12700 (56492) 9550 (42480) 7540 (33539) 6540 (29091) 5730 (25488) 5030 (22374) 4520 (20106) 4000 (17793)

1810 (8051)

Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span, multiply
uniform load by 0.5.

Reference page 222 for general fitting and standard finish specifications.

225

Slotted Angle

D

Slotted Angle Column Loading & Combinations
COLUMN SECTIONS
M

N

N

T-Section

Single Piece

N

Broad Channel
Section

P

P

O

Narrow Channel
Section

P

Dual Channel
Section

T-Channel
Section

O

Uneven Channel
Section

Uneven T-Section

Q

R

T-Channel
Section

I-Section

Uneven I-Section

For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A
number of these combinations are illustrated above. Refer to the following table for load capacities of these combinations.

COLUMN LOADING - SA158-15/8” (41.3) x 15/8” (41.3) x 14 Gauge (1.9)
36” (914 mm)

Column Height
48” (1219 mm)
60” (1524 mm)

72” (1829 mm)

Lbs.

N

Lbs.

N

Lbs.

N

Lbs.

N

M

1450

(6450)

1150

(5115)

950

(4226)

750

(3336)

N

3850

(17125)

3500

(15569)

3000

(13344)

2500

(11120)

Column Loads assume no lateral support.

COLUMN LOADING - SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9)
Column Height
36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm)
Lbs.

M
N
O
P
Q
R

2280
4760
4940
7270
9520
9865

N

Lbs.

(10142) 1970

N

Lbs.

(8763)

1520
3995
4310
6370
7990
8620

(21173) 4490 (19972)
(21974) 4680 (20817)
(32338) 6920 (30781)
(42347) 8970 (39900)
(43881) 9330 (41502)

N

Lbs.

(6761)

1070
3140
3870
5840
6280
7715

(17770)
(19172)
(28335)
(35541)
(38343)

N

Lbs.

(4759)

660
2340
3665
4930
4660
6740

(13967)
(17214)
(25977)
(27935)
(34318)

N

Lbs.

(2936)

–

N

Lbs.

–

–
–
–
–
2060 (9163)
2870 (12766)
–
–
4115 (18304)

(10409) 1750

(7784)

(16303) 2700

(12010)

(21930) 3850

(17125)

(20729) 3500

(15569)

(29981) 5365

(23865)

N

Lbs.

N

–
–
1610
2060
–
3210

–
–
(7161)
(9163)

–
(14279)

Column Loads assume no lateral support.

Slotted Angle

COLUMN LOADING - SA318-15/8” (41.3) x 31/8” (79.4) x 12 Gauge (2.6)
Column Height
36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm)
Lbs.

M
N
O
P
Q
R

3470
7970
8770
12560
15940
17550

N

Lbs.

N

Lbs.

(15435) 2870 (12766) 1970

N

Lbs.

N

Lbs.

(8763)

1280
5270
7690
10480
10560
15360

(5694)

–
3670
6970
9470
7370
13970

(35452) 7360 (32739) 6570 (29225)
(39011) 8580 (38166) 8180 (36386)
(55869) 11970 (53245) 11360 (50532)
(70904) 14750 (65611) 13160 (58538)
(78066) 17150 (76287) 16360 (72773)

(23442)
(34207)
(46617)
(46973)
(68324)

N

Lbs.

–

–
2580
6260
8370
5170
12570

(16325)
(31004)
(42124)
(32783)
(62141)

N

–
(11476)
(27846)
(37231)
(22997)
(55914)

Lbs.

–
–
–
–
5460 (24287)
6880 (30604)
–
–
10970 (48797)

Column Loads assume no lateral support.
Reference page 222 for general fitting and standard finish specifications.

226

N

Lbs.

N

–
–
4460
5370
–
8960

–
–
(19839)
(23887)

–
(39856)

Slotted Angle Kits & Fittings
AHHK-1/4 & AHHK-3/8

8 Hanging rods come in 72” lengths.

AIR HANDLER HANGING KIT

Rods can be field cut for proper
height requirement.

• Standard finishes: ZN
• Load CapacityPer Kit: 400 Lbs. (181.4 kg)

2

or

3 4 5

Item #

Description

Quantity

Rod Hanger Fitting
Lag Screw
Hex Head Cap Screw
Flat Washer (For HHCS)
Hex Nuts (For HHCS)
Hex Nuts (For Hanging Rods)
Flat Washer (See Note 1)
Hanging Rods (72” Long)
SA158 (36” Long)

1
2
3
4
5
6
7
8
9

AHHK
1/4

AHHK
3/8

4
4
4
4
4
16
16
4
2

4
4
4
4
4
16
4
2

1
6 7

Note 1: Flat washers are required for 1/4”-20 hanging rods only.

SA101

SA102

SA154

CONNECTION PLATE

ANGLE BRACE

RIGID CASTER

• Standard finishes: ZN, GRN
• Wt./C 67 Lbs. (30.4 kg)

• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)

• Safety Factor of 1.5
• 300 Lbs. (136.1 kg) maximum load
capacity
• Caster material: Phenolic
• Standard finishes: ZN, GRN
• Wt./Ea. 2.0 Lbs. (.91 kg)

53/32”
(129.4)
12 Gauge

29/32”

33/16”

4”

(80.9)

(101.6)

41/2”
(114.3)

14 Gauge

(57.9)

51/4”
73/8”
(187.3)

4” (101.6)
Dia. Wheels

(133.4)

33/16”
(80.9)

SA155
SWIVEL CASTER
• Safety Factor of 1.5
• 300 Lbs. (136.1 kg) maximum load
capacity
• Caster material: Phenolic
• Standard finishes: ZN, GRN
• Wt./Ea. 2.2 Lbs. (1.0 kg)

4”
(101.6)

SA110

SA131

SLOTTED ANGLE CUTTER

SLOTTED STRAP

• Standard finishes:
• Wt./Ea. 16 Lbs. (7.26 kg)

• Hole pattern is identical to the hole
pattern in slotted angles
• Standard length: 10’ (3.05 m)
• Standard finishes: Pre-Galv. (GALV)
• Material thickness: 14 gauge (1.9)

41/2”
(114.3)

51/4”

15/16”

(133.4)

(33.3)

CLEATS: To reinforce load-bearing joints, cleats can be field made by cutting 21/4” (57.1) long segments from the widest slotted angle available.
Use SA276 for light duty cleats and SA318 for heavy duty cleats.
SPLICE PLATES: To assemble two pieces of slotted angle using a butt joint requires a 6” (152.4) splice plate for reinforcement.

Reference page 222 for general fitting and standard finish specifications.

227

Slotted Angle

4” (101.6)
Dia. Wheels

Reference Data
METRIC CONVERSION CHART
To Convert From

To

Multiply By

radian (rad)
degree

0.01745329
57.29578

Area
foot2
inch2
circular mil
sq. centimeter (cm2)
square meter (m2)
square meter (m2)
square meter (m2)

square meter (m2)
square meter (m2)
square meter (m2)
square inch (in2)
foot2
inch2
circular mil

0.09290304
0.00064516
0.0000000005067075
0.1550003
10.76391
1550.003
1973523000.0

Temperature
degree Fahrenheit
degree Celsius

degree Celsius
degree Fahrenheit

t°C=(t°F -32)/1.8
t°F=1.8t°C+32

Force
pounds-force (lbf)

newtons (N)

4.448222

Reference Data

Angle
degree
radian (rad)

To Convert From
Bending Moment or Torque
lbf • ft
lbf • in
N•m
N•m
Mass
ounce (avoirdupois)
pound (avoirdupois)
ton (short, 2000 lb)
ton (long, 2240 lb)
kilogram (kg)
kilogram (kg)
kilogram (kg)
kilogram (kg)
Mass Per Unit Length
lb/ft
lb/in
kg/m
kg/m
Mass Per Unit Volume
lb/ft3
lb/in3
kg/m3
kg/m3
lbs/ft3
Mass Per Unit Area
lb/ft2
kg/m2
Pressure or Stress
lbf/in2 (psi)
kip/in2 (ksi)
lbf/in2 (psi)
pascal (Pa)
pascal (Pa)
megapascals (MPa)

To Convert From

To

Multiply By

Length
foot (ft)
inch (in)
mil
inch (in)
meter (m)
meter (m)
meter (m)
micrometer (µm)

meter (m)
meter (m)
meter (m)
micrometer (µm)
foot (ft)
inch (in)
mil
inch (in)

0.3048
0.0254
0.0000254
25400.00
3.280840
39.37008
39370.08
0.00003937008

Volume
foot3
inch3
cubic centimeter (cm2)
cubic meter (m3)
cubic meter (m3)
gallon (U.S. liquid)

cubic meter (m3)
cubic meter (m3)
cubic inch (in3)
foot3
inch3
cubic meter (m3)

0.02831685
0.00001638706
0.06102374
35.31466
61023.76
0.003785412

S (m3)
I (m4)
E (Pa)
S (in3)
I (in4)
E (psi)

0.00001638706
0.0000004162314
6894.757
61023.74
2402510.0
0.0001450377

Section Properties
section modulus S (in3)
moment of inertia I (in4)
modulus of elasticity E (psi)
section modulus S (m3)
moment of inertia I (m4)
modulus of elasticity E (Pa)

To

Multiply By

newton meter (N•m)
newton meter (N•m)
lbf • ft
lbf • in

1.355818
0.1129848
0.7375621
8.850748

kilogram (kg)
kilogram (kg)
kilogram (kg)
kilogram (kg)
ounce (avoirdupois)
pound (avoirdupois)
ton (short, 2000 lb)
ton (long, 2240 lb)

0.02834952
0.4535924
907.1847
1016.047
35.27396
2.204622
0.001102311
0.0009842064

Abbreviations
Defl. = Deflection
S.F. = Safety Factor
Ft. = Feet
Pre-galv. = Pre-galvanized Steel
K Factor = Deflection ÷ load in Lbs./Ft.
o.c. = On Center
PVC = Poly Vinyl Chloride
In. = Inch
psi = Pounds per Square Inch
wt./c = Weight per 100 pieces

1.488164
17.85797
0.6719689
0.5599741

kilogram per meter (kg/m)
kilogram per meter (kg/m)
lb/ft
lb/in

Metric Symbols
m = meter

kilogram per cubic meter (kg/m3)
kilogram per cubic meter (kg/m3)
lb/ft3
lb/in3
lbs/in3

16.01846
27679.9
0.06242797
0.0000361273
1728.0

cm = centimeter
mm = millimeter
µm = micrometer
kg = kilogram

kilogram per square meter (kg/m2)
pound per square foot (lb/ft2)

4.882428
0.2048161

pascal (Pa)
pascal (Pa)
megapascals (MPa)
pound-force per square inch (psi)
kip per square inch (ksi)
lbf/in2 (psi)

6894.757
6894757.0
0.006894757
0.0001450377
0.0000001450377
145.0377

N = newton
kN = kilonewton

228

Pa = pascal
MPa = megapascal

Reference Data
DESIGN LOAD DATA (For typical channel-fitting connections when USED IN PAIRS).
90° Fittings

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

kN

1500
1000
750

(6.67)

1000
650
500

(4.45)

2000
1500
900

(8.90)

1500
1150
650

(6.67)

1500
1000
1000

(6.67)

1000
650
500

(4.45)

(4.45)
(3.34)

(2.89)
(2.22)

(6.67)
(4.00)

(5.12)
(2.89)

(4.45)
(4.45)

(2.89)
(2.22)

Design load data includes a safety factor of 2.5 (safety factor = ratio of ultimate load to design load).

90° Fittings

Channel
Thickness
(2.6)
12 ga.
(1.9)
14 ga.
(1.5)
16 ga.

Flat Fittings

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

kN

Lbs.

kN

2500
2000
1500

(11.12)

2000
1650
1250

(8.90)

3000
2000
1500

(13.34)

2500
1650
1250

(11.12)

1000
500
600

(4.45)

1000
800
600

(4.45)

(8.90)
(6.67)

(7.34)
(5.56)

(8.90)
(6.67)

229

(7.34)
(5.56)

(3.56)
(2.67)

(3.56)
(2.67)

Reference Data

Channel
Thickness
(2.6)
12 ga.
(1.9)
14 ga.
(1.5)
16 ga.

Reference Data

Reference Data

General Notes for Strut-Type Channel Raceway
UL Catagory RIUU - Cooper B-Line, Inc., Highland, IL 62249 December 11, 1998 (C)
File No. E29637
FLUORESCENT AND INCANDESCENT LIGHTING
Suitable for not more than the number of wires of the sizes and types indicated in the following tables. Intended to enclose
circuits operating at potentials not exceeding 600 volts between conductors. In all cases, the B217-20 or B217P snap-in
cover is required to complete raceway closure. When using B217-24 snap-in cover, the number of wires is limited to 7 or
fewer conductors no larger than #12 AWG.
B-Line’s strut-type channel raceways and fittings are manufactured and tested to comply with the UL Standard for
Safety for Strut-Type Channel Raceways and Fittings (UL 5B) in accordance with Article 384 of the 2002 National
Electrical Code, NFPA 70.
1. Support spans for strut-type channel raceway shall not exceed 10 foot intervals.
2. No conductor larger than that for which the raceway is listed shall be installed in strut-type channel raceways. No
wires under 14AWG or over 6AWG are allowed in any of Cooper B-Line’s strut-type channel raceway. See tables 1,
2 and 3 below for a listing of the approved conductors for Cooper B-Line’s strut-type channel raceways.
3. The number of conductors permitted in strut-type channel raceway shall not exceed the percentage fill using
Table 384-22 and the applicable outside diameter of specific types and sizes of wire given in the tables in
chapter 9 of the National Electrical Code. Table 384-22 lists two different percent fill areas depending on the
use of internal or external joiners. Use 40% area fill with external joiners and 25% area fill for internal joiners.
4. Items in the electrical section of the Cooper B-Line Strut Systems Catalog identified by the UL symbol provide for
electrical continuity. Other items require the use of a separate grounding wire.
5. If strut-type channel raceway is connected to another wiring system, the raceway must be field-tapped adjacent
to the wire entry point to accept a #10-32 or larger grounding screw. A plated or stainless steel screw may be
used. A sheet metal screw is not acceptable. Drill and tap the grounding wire hole before installing wires in
raceway or move installed wires out of the way to avoid damage. After drilling and tapping, remove metal chips
and burrs before installing screw.

TABLE 1: MAXIMUM NUMBER OF WIRES (Adjusted per NEC Table 384.22 for 40% fill)
Use this table to determine the type and number of conductors for use with Cooper B-Line’s strut-type channel raceway
using external joiners. This table applies for all installations except for the support and supply of electric discharge type
lighting fixtures. See table 2 and 3 for further information.
Insulation
Type
FEP,
FEPB

RH, RHH,
RHW

T, TW

THHN,
THWN

THW

XHHW

Wire Size
AWG.

B11
B11K06

B12
B12K06

B22
B22K06

B24
B24K06

B26
B26K06

B32
B32K06

B56
B56K06

14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6

172
126
90
51
24
52
45
37
20
14
124
95
69
36
21
178
130
82
46
33
82
66
52
29
21
124
95
71
37
27

127
92
66
38
17
38
33
27
14
10
91
70
51
26
15
131
95
60
34
24
61
49
38
21
15
91
70
52
27
20

81
59
42
24
11
24
21
17
9
6
58
45
33
17
9
84
61
38
21
15
39
31
24
13
10
58
45
33
17
13

81
59
42
24
12
26
22
18
10
7
58
45
33
18
10
84
61
38
22
16
39
31
24
14
10
58
45
33
19
14

81
59
42
24
12
27
23
19
10
7
58
45
33
19
11
84
61
38
22
16
39
31
24
15
11
58
45
33
19
14

67
49
35
20
9
20
17
14
7
5
48
37
27
14
8
69
50
32
17
12
32
26
20
11
8
48
37
28
14
10

36
26
19
11
5
12
10
8
4
3
26
20
14
8
5
37
27
17
10
7
17
14
11
6
5
26
20
15
8
6

230

Reference Data
TABLE 2: MAXIMUM NUMBER OF WIRES
Also suitable for the number of wires in table below when installed to support and supply electric discharge type
lighting fixtures when raceway wiring is suitable for at least 70°C and clearance between fixture and raceway is at
least 1/8”. In all cases, a snap-in cover is required to complete the raceway enclosure.

Wire Size

B56
B56K06

14

13

10

10

10

10

10

6

12

13

10

10

10

10

10

6

10

13

10

8

8

8

6

–

8

10

8

6

6

6

4

–

6

8

6

4

4

4

3

–

When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG.

TABLE 3: MAXIMUM NUMBER OF WIRES
Also suitable for the number of wires in table below when installed to support and supply electric discharge type
lighting fixtures when raceway wiring is suitable for 75°C, or wiring suitable for 60°C if a minimum clearance
between fixture and raceway is at least 1/2”. In all cases, a snap-in cover is required to complete the raceway
enclosure.

Wire Size

Raceway Catalog Wires
B11
B12
B22
B24
B26
B32
B11K06
B12K06
B22K06
B24K06
B26K06
B32K06
Type Insulation: FEP, FEPB, RH, RHH, RHW, RUH, THHN, THWN, THW, XHHW

B56
B56K06

14

10

10

10

10

10

10

4

12

10

10

10

10

10

10

3

10

8

5

5

5

5

5

–

8

6

4

4

4

4

4

–

6

4

4

4

4

4

4

–

When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG.

231

Reference Data

Raceway Catalog Wires
B11
B12
B22
B24
B26
B32
B12K06
B22K06
B24K06
B26K06
B32K06
B11K06
Type Insulation: FEP, FEPB, RH, RHH, RHW, RUH, THHN, THWN, THW, XHHW

Reference Data
The data shown in the beam load charts for appropriate channels on page(s) 17 thru 39 is for simply supported, single
span beams with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor
from the chart below.
Load
Factor

Reference Data

Load and Support Condition
Simple Beam - Uniform Load

Deflection
Factor

1.00

1.00

.50

.80

Simple Beam - Two Equal Concentrated Loads at 1/4 Points

1.00

1.10

Beam Fixed at Both Ends - Uniform Load

1.50

.30

Beam Fixed at Both Ends - Concentrated Load at Center

1.00

.40

Cantilever Beam - Uniform Load

.25

2.40

Cantilever Beam - Concentrated Load at End

.12

3.20

1.30

.92

1.00

.42

Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span

.62

.71

Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans

.67

.48

Span

Simple Beam - Concentrated Load at Center

Continuous Beam - Two Equal Spans - Uniform Load on One Span
Span

Span

Continuous Beam - Two Equal Spans - Concentrated Load on Both Spans

EXAMPLES:
PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a simply supported B22 beam with a concentrated
load at midspan as shown.

PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a cantilever B52 beam with a uniformly distributed
load.

96”
SOLUTION:
From beam load chart for B22 (page 22), maximum allowable
load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in the chart above.

SOLUTION:
From beam load chart for B52 (page 33), maximum allowable
load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in chart above.

LOAD = A x load factor = _______
DEFLECTION = B x deflection factor =

LOAD = A x load factor = _______
DEFLECTION = B x deflection factor = _______

232

Reference Data
RIGID STEEL CONDUIT (HEAVY WALL CONDUIT)
Nominal
Conduit Size

Nominal
Inside
Diameter

Outside
Diameter

mm

In.

mm

In.

(10)

1/2”

(15)

3/4”

(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”

(25)

0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625

(17.1)

0.493
0.632
0.836
1.063
1.394
1.624
2.083
2.489
3.090
3.570
4.050
5.073
6.093

(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)

(21.3)
(26.7)
(33.4)
(42.2)
(48.3)
(60.3)
(73.0)
(88.9)
(101.6)
(114.3)
(141.3)
(168.3)

mm
(12.5)
(16.0)
(21.3)
(27.0)
(35.4)
(41.3)
(52.9)
(63.2)
(78.5)
(90.7)
(102.9)
(128.9)
(154.8)

Lbs.

kg

51.5
79.0
105.0
153.0
201.0
249.0
332.0
527.0
682.6
831.0
972.3
1313.6
1745.3

(23.4)
(35.8)
(47.6)
(69.4)
(91.2)
(113.0)
(150.6)
(239.1)
(309.6)
(376.9)
(441.0)
(595.9)
(791.7)

Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.

65.1
101.1
145.8
219.3
318.3
408.8
593.8
901.0
1259.0
1604.0
1967.0
2876.0
4003.0

kg
(29.5)
(45.9)
(66.1)
(99.5)
(144.4)
(185.4)
(269.3)
(408.7)
(571.1)
(727.6)
(892.2)
(1304.5)
(1815.7)

Dimensions taken from ANSI C80.1-1977.
*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.

INTERMEDIATE METAL CONDUIT (IMC)
Nominal
Conduit Size

Nominal
Inside
Diameter

Outside
Diameter

In.

mm

In.

mm

In.

1/2”

(15)
(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”

(25)

0.815
1.029
1.290
1.638
1.883
2.360
2.857
3.476
3.971
4.466

(20.7)

3/4”

.675
.879
1.120
1.468
1.703
2.170
2.597
3.216
3.711
4.206

(32)
(40)
(50)
(65)
(80)
(90)
(100)

(26.1)
(32.7)
(41.6)
(47.7)
(59.9)
(72.5)
(88.3)
(100.8)
(113.4)

Minimum Weight
Per 100 Ft. (30.5m) with
Couplings Attached

mm
(17.1)
(22.3)
(28.4)
(37.3)
(43.3)
(55.1)
(66.0)
(81.7)
(94.3)
(106.8)

Lbs.

kg

60.0
82.0
116.0
150.0
182.0
242.0
428.0
526.0
612.0
682.0

(27.2)
(37.2)
(52.6)
(68.0)
(82.5)
(109.7)
(194.1)
(238.6)
(277.6)
(309.4)

Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.

82.1
122.8
182.3
267.3
341.8
503.8
775.0
1069.0
1346.0
1632.0

kg
(37.2)
(55.7)
(82.7)
(121.2)
(155.0)
(228.5)
(351.5)
(485.0)
(610.8)
(740.5)

*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Rigid and Intermediate Metal Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each
outlet box, junction box, cabinet, or fitting, except for straight runs of conduit connected with couplings which may be
supported in accordance with NEC Article 345 and 346, provided such supports prevent transmission of stresses to
termination where conduit is deflected between supports.

NEC TABLE 346-12
Maximum Support Span

Conduit Size
In.

mm

Feet

Meters

1/2-3/4

(15-20)

10

(3.05)

1

(25)

12

(3.66)

11/4-11/2

(32-40)

14

(4.27)

2-21/2

(50-65)

16

(4.88)

3-6

(80-150)

20

(6.10)

233

Reference Data

In.
3/8”

Minimum Weight
Per 100 Ft. (30.5m) with
Couplings Attached

Reference Data
ELECTRICAL METALLIC TUBING (EMT) — THINWALL CONDUIT

Reference Data

Nominal
Conduit Size

Outside
Diameter

Inside
Diameter

In.

mm

In.

mm

In.

3/8”

(10)
(15)

3/4”

(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”

(25)

0.577
0.706
0.922
1.163
1.510
1.740
2.197
2.875
3.500
4.000
4.500

(14.7)

1/2”

0.493
0.622
0.824
1.049
1.380
1.610
2.067
2.731
3.356
3.834
4.334

(32)
(40)
(50)
(65)
(80)
(90)
(100)

(17.9)
(23.4)
(29.5)
(38.3)
(44.2)
(55.8)
(73.0)
(88.9)
(101.6)
(114.3)

Weight
Per 100 Ft. (30.5m)

mm
(12.5)
(15.8)
(20.9)
(26.6)
(35.1)
(40.9)
(52.5)
(69.4)
(85.2)
(97.4)
(110.1)

Lbs.

kg

23.0
28.5
43.5
64.0
95.0
110.0
140.0
205.0
250.0
325.0
370.0

(10.4)
(12.9)
(19.7)
(29.0)
(43.1)
(49.9)
(63.5)
(93.0)
(113.4)
(147.4)
(167.8)

Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.

36.6
50.6
84.3
130.3
212.3
269.8
401.8
579.0
826.3
1098.0
1364.0

kg
(16.6)
(23.0)
(38.2)
(59.1)
(96.3)
(122.4)
(182.3)
(262.6)
(374.8)
(498.0)
(618.7)

Dimensions taken from ANSI C80.3-1977.
*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Electrical Metallic tubing shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each outlet box,
junction box,cabinet, or fitting. See NEC Article 348.

RIGID ALUMINUM CONDUIT
Nominal
Conduit Size

Nominal
Inside
Diameter

Outside
Diameter

In.

mm

In.

mm

In.

1/2”

(15)
(20)

1”
1
1 /4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”

(25)

0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625

(21.3)

3/4”

0.632
0.836
1.063
1.394
1.624
2.083
2.489
3.090
3.570
4.050
5.073
6.093

(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)

(26.7)
(33.4)
(42.2)
(48.3)
(60.3)
(73.0)
(88.9)
(101.6)
(114.3)
(141.3)
(168.3)

Minimum Weight
Per 100 Ft. (30.5m) with
Couplings Attached

mm
(16.1)
(21.2)
(27.0)
(35.4)
(41.2)
(52.9)
(63.2)
(78.5)
(90.7)
(102.9)
(128.9)
(154.8)

Lbs.

kg

27.4
36.4
53.0
69.6
82.2
115.7
182.5
238.9
287.7
340.0
465.4
612.5

(12.4)
(16.5)
(24.0)
(31.6)
(37.3)
(52.5)
(82.8)
(108.4)
(130.5)
(154.2)
(211.1)
(277.8)

Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.

49.5
77.2
119.3
186.9
242.0
377.5
556.5
815.2
1061.0
1334.0
2028.0
2870.0

kg
(22.5)
(35.0)
(54.1)
(84.8)
(109.8)
(171.2)
(252.4)
(369.8)
(481.3)
(605.1)
(919.9)
(1301.8)

Dimensions taken from ANSI C80.5-1977.
*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Aluminum Rigid Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each outlet box,
junction box, cabinet, or fitting, except for straight runs of conduit connected with couplings which may be supported in
accordance with NEC Table 344.30 (B)(2), provided such supports prevent transmission of stresses to termination where
conduit is deflected between supports.

NEC TABLE 344.30 (B)(2)
Conduit Size

Maximum Support Span

In.

mm

Feet

Meters

1/2-3/4

(15-20)

10

(3.05)

1

(25)

12

(3.66)

11/4-11/2

(32-40)

14

(4.27)

2-21/2

(50-65)

16

(4.88)

3-6

(80-150)

20

(6.10)

234

Reference Data
SCHEDULE 40 PVC PLASTIC PIPE
Nominal
Pipe Size
mm
(3)

1/4”

(6)

3/8”

(10)

1/2”

(15)

3/4”

(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”
10”
12”

(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)

In.

.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750

Inside
Diameter

mm
(10.3)
(13.7)
(17.1)
(21.3)
(26.7)
(33.4)
(42.2)
(48.3)
(60.3)
(73.0)
(88.9)
(101.6)
(114.3)
(141.3)
(168.3)
(219.1)
(273.1)
(323.9)

In.

.269
.364
.493
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
10.020
11.938

Weight of Pipe
Per 100 Ft. (30.5m)

mm

Lbs.

(9.2)
(12.5)
(15.8)
(20.9)
(26.6)
(35.1)
(40.9)
(52.5)
(62.7)
(77.9)
(90.1)
(102.3)
(128.2)
(154.1)
(202.7)
(254.5)
(303.2)

cubic ft. of water weighs 62.41 Lbs.
cubic meter of water weighs 999.972 kg.
gallon (U.S.) weighs 8.335 Lbs.
liter weighs .999 kg.

1/4-20”
5/16-18”
3/8-16”
1/2-13”
5/8-11”
3/4-10”
7/8-9”

1-8”
11/8-7”
11/4-7”
11/2-6”

In.2

cm2

0.027
0.045
0.068
0.126
0.202
0.302
0.419
0.551
0.693
0.889
1.293

(0.174)
(0.290)
(0.438)
(0.812)
(1.303)
(1.948)
(2.703)
(3.561)
(4.471)
(5.735)
(8.342)

3/4”

Design Load (SF=5)
Lbs.

240
400
730
1350
2160
3230
4480
5900
7450
9500
13800

7.2
12.7
19.2
29.6
44.9
69.6
108.2
140.0
214.9
317.1
463.9
604.1
756.0
1148.8
1613.0
2713.5
4208.9
5886.4

(3.7)
(4.9)
(7.4)
(9.9)
(14.6)
(19.7)
(23.5)
(31.5)
(49.7)
(65.1)
(79.7)
(92.7)
(127.8)
(163.7)
(247.3)
(358.9)
(469.6)

Nominal
Conduit
Size
1/2”

Root Area

Lbs.

(2.1)

kg
(3.2)
(5.8)
(8.7)
(13.4)
(20.4)
(31.6)
(49.1)
(63.5)
(97.5)
(143.8)
(210.4)
(274.0)
(342.9)
(521.1)
(731.7)
(1230.8)
(1909.1)
(2670.0)

CLAMP SIZING CHART FOR PVC COATED
RIGID CONDUIT AND CLAMPS

ALL THREADED ROD (ATR)
Nominal
Size (In)
and Thread

kg

4.7
8.2
10.9
16.4
21.8
32.1
43.4
51.8
69.5
109.6
143.5
175.6
204.3
281.7
360.9
545.3
791.3
1035.2

(6.8)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”

kN
(1.07)
(1.78)
(3.24)
(6.00)
(9.60)
(14.37)
(19.93)
(26.24)
(33.14)
(42.25)

(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)

Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating
0

.020 (.51mm)

0

.020 (.51mm)

B2028
B2030
B2032
B2005
B2012
B2013
B2014
B2015
B2016
B2017
B2019
B2020

B2002
B2030
B2032
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115

B2002
B2030
B2032
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115

B2029
B2003
B2033
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115

CLAMP SIZING CHART FOR PVC COATED
THINWALL (EMT) CONDUIT AND CLAMPS

(61.38)

Nominal
Conduit
Size

Dimensions taken from ANSI B1.1-1982 Unified Inch Screw
Threads. All threads are UNCR series.
Tabulated loads are based on an allowable tensile stress
of 12000 psi (82.7 MPa) reduced by 25% resulting in
9000 psi (62 MPa). From ANSI/MSS SP-58, Table 3.

3/8”
1/2”
3/4”

1”
11/4”
11/2”
2”

235

(10)
(15)
(20)
(25)
(32)
(40)
(50)

Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating
0

.020 (.51mm)

0

.020 (.51mm)

B2026
B2027
B2029
B2003
B2004
B2035
B2039

B2026
B2027
B2029
B2031
B2034
B2035
B2039

B2026
B2027
B2029
B2031
B2034
B2035
B2039

B2007
B2008
B2009
B2031
B2034
B2036
B2013

Reference Data

1
1
1
1

In.
1/8”

Outside
Diameter

Weight of Pipe
Filled With Water
Per 100 Ft. (30.5m)

Reference Data
COPPER TUBING, TYPE L

Reference Data

Nominal
Tubing Size

Outside
Diameter

In.

mm

In.

1/4”

(6)

3/8”

(10)

1/2”

(15)

5/8”

(17)

3/4”

(20)

1”
11/4”
11/2”
2”
1
2 /2”
3”
31/2”
4”
5”
6”
8”
10”
12”

(25)

.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
10.125
12.125

(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)

mm
(9.5)
(12.7)
(15.9)
(19.1)
(22.2)
(28.6)
(34.9)
(41.3)
(54.0)
(66.7)
(79.4)
(92.1)
(104.8)
(130.2)
(155.6)
(206.4)
(257.2)
(308.0)

Inside
Diameter
In.

.315
.430
.545
.666
.785
1.025
1.265
1.505
1.985
2.465
2.945
3.425
3.905
4.875
5.845
7.725
9.625
11.565

mm
(8.0)
(10.9)
(13.8)
(16.9)
(19.9)
(26.0)
(32.1)
(38.2)
(50.4)
(62.6)
(74.8)
(87.0)
(99.2)
(123.8)
(148.5)
(196.2)
(244.5)
(293.8)

Weight of Tubing
Per 100 Ft. (30.5m)

Weight of Tubing
Filled With Water
Per 100 Ft. (30.5m)

Lbs.

Lbs.

12.6
19.8
28.5
36.2
45.5
65.5
88.4
114.0
175.0
248.0
333.0
429.0
538.0
761.0
1020.0
1930.0
3010.0
4040.0

kg
(5.7)
(9.0)
(12.9)
(16.4)
(20.6)
(29.7)
(40.1)
(51.7)
(79.4)
(112.5)
(151.0)
(194.6)
(244.0)
(345.2)
(462.7)
(875.4)
(1365.3)
(1832.5)

16.0
26.1
38.6
51.3
66.5
101.3
142.9
191.1
309.1
454.8
628.2
828.3
1057.1
1570.0
2182.9
3961.3
6163.4
8592.8

kg
(7.2)
(11.8)
(17.5)
(23.3)
(30.2)
(45.9)
(64.8)
(86.7)
(140.2)
(206.3)
(285.0)
(375.7)
(479.5)
(712.1)
(990.2)
(1796.8)
(2795.7)
(3897.6)

COPPER TUBING, TYPE K
Nominal
Tubing Size
In.

Outside
Diameter

mm

In.

1/4”

(6)

3/8”

(10)

1/2”

(15)

5/8”

(17)

3/4”

(20)

1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
5”
6”
8”
10”
12”

(25)

.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
10.125
12.125

(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)

mm
(9.5)
(12.7)
(15.9)
(19.1)
(22.2)
(28.6)
(34.9)
(41.3)
(54.0)
(66.7)
(79.4)
(92.1)
(104.8)
(130.2)
(155.6)
(206.4)
(257.2)
(308.0)

Inside
Diameter
In.

.305
.402
.527
.652
.745
.995
1.245
1.481
1.959
2.435
2.907
3.385
3.857
4.805
5.741
7.583
9.449
11.315

mm
(7.7)
(10.2)
(13.4)
(16.6)
(18.9)
(25.3)
(31.6)
(37.6)
(49.8)
(61.8)
(73.8)
(86.0)
(98.0)
(122.0)
(145.8)
(192.6)
(240.0)
(287.4)

Weight of Tubing
Filled With Water
Per 100 Ft. (30.5m)

Lbs.

Lbs.

14.5
26.9
34.4
41.8
64.1
83.9
104.0
136.0
206.0
293.0
400.0
512.0
651.0
967.0
1390.0
2590.0
4030.0
5780.0

Dimensions taken from ASTM B 88-83.
1
1
1
1

Weight of Tubing
Per 100 Ft. (30.5m)

cubic ft. of water weighs 62.41 Lbs.
cubic meter of water weighs 999.972 kg.
gallon (U.S.) weighs 8.335 Lbs.
liter weighs .999 kg.

236

kg
(6.6)
(12.2)
(15.6)
(19.0)
(29.1)
(38.1)
(47.2)
(61.7)
(93.4)
(132.9)
(181.4)
(232.2)
(295.3)
(438.6)
(630.5)
(1174.8)
(1828.0)
(2621.8)

17.7
32.4
43.9
56.3
83.0
117.6
156.8
210.7
336.6
494.8
687.7
902.0
1157.4
1752.9
2511.9
4547.3
7069.2
10138.0

kg
(8.0)
(14.7)
(19.9)
(25.5)
(37.6)
(53.3)
(71.1)
(95.6)
(152.7)
(224.5)
(311.9)
(409.2)
(525.0)
(795.1)
(1139.4)
(2062.6)
(3206.5)
(4598.5)

Reference Data
STANDARD WEIGHT SCHEDULE 40 STEEL PIPE
Nominal
Pipe Size

Outside
Diameter

mm
(10)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
(350)
(400)
(450)
(500)
(600)

In.

mm

(17.1)
.675
1/2”
(21.3)
.840
3/4”
(26.7)
1.050
(33.4)
1”
1.315
(42.2)
11/4”
1.660
(48.3)
11/2”
1.900
(60.3)
2”
2.375
(73.0)
21/2”
2.875
(88.9)
3”
3.500
31/2”
4.000 (101.9)
(114.3)
4”
4.500
5”
5.563 (141.3)
6”
6.625 (168.3)
8”
8.625 (219.1)
10”
10.750 (273.1)
12”
12.750 (323.9)
14”
14.000 (355.6)
16”
16.000 (406.4)
18”
18.000 (457.2)
20”
20.000 (508.0)
24”
24.000 (609.6)
Dimensions taken from ASTM A 53-82.

1
1
1
1

In.

mm

Lbs.

kg

Lbs.

.493
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
10.020
12.000
13.250
15.250
17.250
19.250
23.250

(12.5)
(15.8)
(20.9)
(26.6)
(35.1)
(40.9)
(52.5)
(62.7)
(77.9)
(90.1)
(102.3)
(128.2)
(154.1)
(202.7)
(254.5)
(304.8)
(336.6)
(387.4)
(438.2)
(489.0)
(590.6)

57.0
85.0
113.0
168.0
227.0
272.0
365.0
579.0
758.0
911.0
1079.0
1462.0
1897.0
2855.0
4048.0
4956.0
5457.0
6258.0
7059.0
7860.0
9462.0

(25.9)
(38.6)
(51.3)
(76.2)
(103.0)
(123.4)
(165.6)
(262.6)
(343.8)
(413.2)
(489.4)
(663.2)
(860.5)
(1295.0)
(1836.1)
(2248.0)
(2475.3)
(2838.6)
(3201.9)
(3565.2)
(4291.9)

65.3
98.2
136.1
205.5
291.8
360.2
510.4
786.5
1078.4
1339.5
1630.7
2329.1
3149.1
5023.2
7465.6
9857.7
11433.1
14174.3
17187.9
20473.7
27862.5

kg

Reference Data

In.
3/8”

Weight of Pipe
Filled With Water
Per 100 Ft. (30.5mm)

Nominal Weight
Per 100 Ft. (30.5mm)
Plain End

Inside
Diameter

(29.6)
(44.5)
(61.7)
(93.2)
(132.4)
(163.4)
(231.5)
(356.8)
(489.2)
(607.6)
(739.7)
(1056.4)
(1428.4)
(2278.5)
(3386.3)
(4471.4)
(5185.9)
(6429.4)
(7796.3)
(9286.7)
(12638.2)

cubic ft. of water weighs 62.41 Lbs.
cubic meter of water weighs 999.972 kg.
gallon (U.S.) weighs 8.335 Lbs.
liter weighs .999 kg.

TRAPEZE HANGERS USING B-LINE STRUT OR ANGLE IRON
Nominal Pipe Sizes
Length of
Trapeze Bar

21/2” (65mm)
or less

3” (80mm)

31/2” (90mm)

4” (100mm)

5” (125mm)

6” (150mm)

8” (200mm)

10” (250mm)

1’-6”

11/2” x 11/2” x 3/16”

11/2” x 11/2” x 3/16”

11/2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

21/2” x 11/2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 1/4”

(0.46m)

B24SH

B24SH

B24SH

B22SH

B22SH

B12SH

B11SH

B11SH

2’-0”

11/2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 1/4”

(0.61m)

B24SH

B22SH

B22SH

2’-6”

2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

B22SH

21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16”
B12SH

21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16”

B12SH

B11SH

B11SH

3” x 2” x 3/16”

3” x 2” x 1/4”

3” x 2” x 1/4”

B11SH

B11SH

(0.76m)

B22SH

B22SH

B22SH

B12SH

B12SH

B11SH

3’-0”

2” x 11/2” x 3/16”

2” x 11/2” x 3/16”

21/2” x 11/2” x 3/16”

21/2” x 11/2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 3/16”

31/2” x 21/2” x 1/4” 31/2” x 21/2” x 5/16”

(0.91m)

B22SH

B22SH

B12SH

B12SH

B11SH

B11SH

B12SHA

B12SHA

4’-0”

21/2” x 11/2” x 3/16”

21/2” x 11/2” x 3/16”

21/2” x 11/2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 1/4”

31/2” x 21/2” x 5/16”

4” x 3” x 5/16”

(1.22m)

B12SH

B12SH

B12SH

B11SH

B11SH

B11SH

B12SHA

B12SHA

5’-0”

21/2” x 11/2” x 3/16”

21/2” x 11/2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 1/4”

31/2” x 21/2” x 5/16”

4” x 3” x 5/16”

5” x 31/2” x 5/16”

(1.52m)

B12SH

B12SH

B11SH

B11SH

B11SH

B12SHA

B12SHA

B11SHA

6’-0”

21/2” x 11/2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 1/4”

31/2” x 21/2” x 5/16”

4” x 3” x 5/16”

4” x 3” x 5/16”

5” x 31/2” x 5/16”

(1.83m)

B12SH

B11SH

B11SH

B11SH

B12SHA

B12SHA

B12SHA

B11SHA

7’-0”

3” x 2” x 3/16”

3” x 2” x 3/16”

3” x 2” x 1/4”

3” x 2” x 1/4”

31/2” x 21/2” x 5/16”

4” x 3” x 5/16”

5” x 31/2” x 5/16”

6” x 4” x 1/4”

B11SH

B12SHA

(2.13m)

B11SH

B11SH

B11SH

8’-0”

3” x 2” x 3/16”

3” x 2” x 1/4”

3” x 2” x 1/4”

(2.44m)

B11SH

B11SH

B11SH

9’-0”

3” x 2” x 3/16”

3” x 2” x 1/4”

31/2” x 21/2” x 5/16”

31/2” x 21/2” x 5/16” 31/2” x 21/2” x 5/16”
B12SHA

B12SHA

31/2” x 21/2” x 5/16” 31/2” x 21/2” x 5/16”

B12SHA

B11SHA

2-B12SHA

4” x 3” x 5/16”

5” x 31/2” x 5/16”

6” x 4” x 1/4”

B12SHA

B11SHA

2-B12SHA

4” x 3” x 5/16”

5” x 31/2” x 5/16”

6” x 4” x 3/8”

(2.74m)

B11SH

B11SH

B12SHA

B12SHA

B12SHA

B12SHA

B11SHA

2-B11SHA

10’-0”

3” x 2” x 1/4”

3” x 2” x 1/4”

31/2” x 21/2” x 5/16”

31/2” x 21/2” x 5/16”

4” x 3” x 5/16”

5” x 31/2” x 5/16”

6” x 4” x 1/4”

6” x 4” x 3/8”

(3.05m)

B11SH

B11SH

B12SHA

B12SHA

B12SHA

B11SHA

2-B12SHA

2-B11SHA

REFERENCE: Table 3-14.1.6 standard for the installation of Sprinkler Systems, NFPA No. 13-1985,
published by National Fire Protection Association.

237

Tolco™ to Cooper B-Line Cross Reference

Tolco to B-Line Cross

Tolco
Fig#

Cooper B-Line
Pt. #

Tolco
Fig#

Cooper B-Line
Pt. #

Tolco
Fig#

Cooper B-Line
Pt. #

2 STR 1/2” . . . . . . . . . . . . . . . B2400-1/2
2 STR 3/4” . . . . . . . . . . . . . . . B2400-3/4
2 STR 1” . . . . . . . . . . . . . . . . . . B2400-1
2 STR 11/4” . . . . . . . . . . . . B2400-11/4
2 STR 11/2” . . . . . . . . . . . . B2400-11/2

BC-14-5/8 . . . . . . . . . . . . . . . . . . . B321-4
BC-14-3/4 . . . . . . . . . . . . . . . . . . . B321-5
BC-16 . . . . . . . . . . . . . . . . . . . . . . . . . B314
BC-17 . . . . . . . . . . . . . . . . . . . . . B441-22
BC-18-3/8 . . . . . . . . . . . . . . . . . B212-3/8

BR-22-12 . . . . . . . . . . . . . . . . . B409-12
BR-22-18 . . . . . . . . . . . . . . . . . B409-18
BR-22-24 . . . . . . . . . . . . . . . . . B409-25
C SAFETY END CAP . . . . . . B852
C-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B54

2 STR 2” . . . . . . . . . . . . . . . . . . B2400-2
2 STR 21/2” . . . . . . . . . . . . B2400-21/2
2 STR 3” . . . . . . . . . . . . . . . . . . B2400-3
2 STR 31/2” . . . . . . . . . . . . B2400-31/2
2 STR 4” . . . . . . . . . . . . . . . . . . B2400-4

BC-18-1/2 . . . . . . . . . . . . . . . . . B212-1/2
BC-19 . . . . . . . . . . . . . . . . . . . . . . . . . B427
BC-20 . . . . . . . . . . . . . . . . . . . . . . . . . B355
BC-21 . . . . . . . . . . . . . . . . . . . . . . . . . B211
BC-23 . . . . . . . . . . . . . . . . . . . . . . . . . B614

C-14 END CAP . . . . . . . . . . . . . . B204
CL-10 . . . . . . . . . . . . . . . . . . . . . . B217-20
CR ISOLATOR . . . . . . . . . . . . . . . . ISO
CUSH CLP 1/4 . . . . . . . . . . . . BVT025
CUSH CLP 3/8 . . . . . . . . . . . . BVT037

2 STR 5” . . . . . . . . . . . . . . . . . . B2400-5
2 STR 6” . . . . . . . . . . . . . . . . . . B2400-6
2 STR 8” . . . . . . . . . . . . . . . . . . B2400-8
65XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3367

BC-70 . . . . . . . . . . . . . B760-22 Series
BC-71 . . . . . . . . . . . B760-22A Series
BC-72 . . . . . . . . . . . . . B761-22 Series
BC-73 . . . . . . . . . . . B761-22A Series
BR-10-8L . . . . . . . . . . . . . . . . B185SHL

CUSH CLP 1/2 . . . . . . . . . . . . BVT050
CUSH CLP 5/8 . . . . . . . . . . . . BVT062
CUSH CLP 3/4 . . . . . . . . . . . . BVT075
CUSH CLP 1 . . . . . . . . . . . . . BVT100
CUSH CLP 11/8 . . . . . . . . . . BVT112

69R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . SC228
98B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
310 . . . . . . . . . . . . . . . . . . . . . . . . . . . B2501

BR-10-8R . . . . . . . . . . . . . . . B185SHR
BR-10-10L . . . . . . . . . . . . . . . B186SHL
BR-10-10R . . . . . . . . . . . . . B186SHR
BR-10-12L . . . . . . . . . . . . . . . B178SHL
BR-10-12R . . . . . . . . . . . . . B178SHR

CUSH CLP 11/4
CUSH CLP 13/8
CUSH CLP 11/2
CUSH CLP 15/8
CUSH CLP 13/4

310N 1/4
310N 3/8
310N 1/2
310N 5/8
310N 3/4

N2501-1/4
N2501-3/8
. . . . . . . . . . . . . . . . . N2501-1/2
. . . . . . . . . . . . . . . . . N2501-5/8
. . . . . . . . . . . . . . . . . N2501-3/4

BR-10-18L . . . . . . . . . . . . . . . B181SHL
BR-10-18R . . . . . . . . . . . . . B181SHR
BR-10-20L . . . . . . . . . . . . . . . B182SHL
BR-10-20R . . . . . . . . . . . . . B182SHR
BR-11-81/2 . . . . . . . . . . . . . . . . . . . . B187

CUSH CLP 2 . . . . . . . . . . . . . BVT200
CUSH CLP 21/8 . . . . . . . . . . BVT212
CUSH CLP 21/2 . . . . . . . . . . BVT250
CUSH CLP 25/8 . . . . . . . . . . BVT262
CUSH CLP 3 . . . . . . . . . . . . . BVT300

310N 7/8 . . . . . . . . . . . . . . . . . N2501-7/8
902 . . . . . . . . . . . . . . . . . . . . . . . . . . . B335V
912 . . . . . . . . . . . . . . . . . . . . . . . . . . B335-1
913 . . . . . . . . . . . . . . . . . . . . . . . . . . B335-2
914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B335

BR-11-101/2 . . . . . . . . . . . . . . . . . . . B541
BR-11-121/2 . . . . . . . . . . . . . . . B289-12
BR-11-141/2 . . . . . . . . . . . . . . . B289-14
BR-11-22 . . . . . . . . . . . . . . . . . . . . . . B292
BR-12 . . . . . . . . . . . . . . . . . . . . . . . . . B290

CUSH CLP 31/8 . . . . . . . . . . BVT312
CUSH CLP 35/8 . . . . . . . . . . BVT362
CUSH CLP 4 . . . . . . . . . . . . . BVT400
CUSH CLP 45/8 . . . . . . . . . . . . . . . . N/A
CUSH CLP 51/8 . . . . . . . . . . . . . . . . N/A

915 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B634
915D . . . . . . . . . . . . . . . . . . . . . . . . . . B635
A SAFETY END CAP . . . . . . . B822
A-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22
A-12 End Cap . . . . . . . . . . . . . . . . B205

BR-13 . . . . . . . . . . . . . . . . . . . . . . . . . B194
BR-14 . . . . . . . . . . . . . . . . . . . . . . . . . B370
BR-15-18 . . . . . . . . . . . . . . . . . B196-18
BR-15-24 . . . . . . . . . . . . . . . . . B196-24
BR-16-6 . . . . . . . . . . . . . . . . . . . B198A-6

CUSH CLP 61/8 . . . . . . . . . . BVT612
CUSH CLP IPS 1/4 . . . . . . BVP025
CUSH CLP IPS 3/8 . . . . . . BVP037
CUSH CLP IPS 1/2 . . . . . . BVP050
CUSH CLP IPS 3/4 . . . . . . BVP075

A-12 End Spot . . . . . . . . . . . . . . B3322
A-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B24
A-14 End Cap . . . . . . . . . . . . . . . . B223
BC-09 . . . . . . . . . . . . . . . . . B312 Series
BC-10 . . . . . . . . . . . . . . . . . . . . . . . . . B751

BR-16-12
BR-17-12
BR-17-18
BR-17-24
BR-17-30

B198A-12
B297-12
. . . . . . . . . . . . . . . . . B297-18
. . . . . . . . . . . . . . . . . B297-24
. . . . . . . . . . . . . . . . . B297-30

CUSH CLP IPS 1 . . . . . . . . BVP100
CUSH CLP IPS 11/4 . . . . . BVP125
CUSH CLP IPS 11/2 . . . . . BVP150
CUSH CLP IPS 2 . . . . . . . . BVP200
CUSH CLP IPS 21/2 . . . . . BVP250

BC-11 . . . . . . . . . . . . . . . B751-J Series
BC-12 . . . . . . . . . . . . . . B751-J Series
BC-13-1/4 . . . . . . . . . . . . . . . . . . . . . B303
BC-13-5/16 . . . . . . . . . . . . . . . . . . . . B304
BC-13-3/8 . . . . . . . . . . . . . . . . . . . . . B305

BR-17-36 . . . . . . . . . . . . . . . . . B297-36
BR-18-6 . . . . . . . . . . . . . . . . . . . . B293-6
BR-18-12 . . . . . . . . . . . . . . . . . B293-12
BR-19-18 . . . . . . . . . . . . . . . . B293A-18
BR-18-24 . . . . . . . . . . . . . . . . . B293-24

CUSH CLP IPS 3 . . . . . . . . BVP300
CUSH CLP IPS 31/2 . . . . . BVP350
CUSH CLP IPS 4 . . . . . . . . BVP400
CUSH CLP IPS 5 . . . . . . . . BVP500
CUSH CLP IPS 6 . . . . . . . . BVP600

BC-13-1/2 . . . . . . . . . . . . . . . . . . . . . B307
BC-13-5/8 . . . . . . . . . . . . . . . . . . . . . B309
BC-13-3/4 . . . . . . . . . . . . . . . . . . . B321-5
BC-14-1/4 . . . . . . . . . . . . . . . . . . . . . B303
BC-14-5/16 . . . . . . . . . . . . . . . . . . . . B304

BR-19-6 . . . . . . . . . . . . . . . . . . . B293A-6
BR-18-12 . . . . . . . . . . . . . . . . . B293-12
BR-19-18 . . . . . . . . . . . . . . . . B293A-18
BR-19-24 . . . . . . . . . . . . . . . . B293A-24
BR-20 . . . . . . . . . . . . . . . . . . . . . . . . . B439

CUSH STRIP . . . . . . . . . . . . . . . B1999
D-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B12
D-12 END CAP . . . . . . . . . . . . . . B221
E SAFETY END CAP . . . . B822-A
E-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11

BC-14-3/8
BC-14-1/2

BR-21 . . . . . . . . . . . . . . . . . . . . . . . . . B356
BR-22-6 . . . . . . . . . . . . . . . . . . . . B409-6

E-12 END CAP . . . . . . . . . . . . . . B222
EMTC-1/2 . . . . . . . . . . . . . . . . . . . . B2001

.................
.................

...................
...................

B321-1
B321-2

................

.................

238

BVT125
BVT137
. . . . . . . . . . BVT150
. . . . . . . . . . BVT162
. . . . . . . . . . BVT175
..........
..........

Tolco™ to Cooper B-Line Cross Reference
Tolco
Fig#

Cooper B-Line
Pt. #

Tolco
Fig#

Cooper B-Line
Pt. #

Tolco
Fig#

Cooper B-Line
Pt. #

EMTC-3/4 . . . . . . . . . . . . . . . . . . . . B2002
EMTC-1 . . . . . . . . . . . . . . . . . . . . . B2003
EMTC-11/4 . . . . . . . . . . . . . . . . . . B2004
EMTC-11/2 . . . . . . . . . . . . . . . . . . B2005
EMTC-2 . . . . . . . . . . . . . . . . . . . . . B2006

L-23 U . . . . . . . . . . . . . . . . . . . . . . . . . B844
L-24 L . . . . . . . . . . . . . . . . . . . . . . . B503L
L-24 R . . . . . . . . . . . . . . . . . . . . . . . B503R
L-25 L . . . . . . . . . . . . . . . . . . . . . . . B503L
L-25 . . . . . . . . . . . . . . . . . . . . . . . . . B503R

OD 3/4 . . . . . . . . . . . . . . . . . . . . . . . B2027
OD 7/8 . . . . . . . . . . . . . . . . . . . . . . . B2008
OD 1 . . . . . . . . . . . . . . . . . . . . . . . . . B2029
OD 11/8 . . . . . . . . . . . . . . . . . . . . . . B2030
OD 11/4 . . . . . . . . . . . . . . . . . . . . . . B2031

F-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . B129
F-10 . . . . . . . . . . . . . . . . . . . . . . . . . B200D
F-11 . . . . . . . . . . . . . . . . . . . . . . . . . B201D
F-12-1/2 . . . . . . . . . . . . . . . . . . . . B202-D
F-12-5/8 . . . . . . . . . . . . . . . . . . . B202-1D

L-26 L . . . . . . . . . . . . . . . . . . . . . . . B236L
L-26 R . . . . . . . . . . . . . . . . . . . . . . . B236R
L-27 . . . . . . . . . . . . . . . . . . . . . . . . . . . B357
L-28 . . . . . . . . . . . . . . . . . . . . . . . . . . . B237
L-29 . . . . . . . . . . . . . . . . . . . . . . B240-378

OD 13/8
OD 11/2
OD 15/8
OD 13/4
OD 17/8

F-12-3/4 . . . . . . . . . . . . . . . . . . . B202-2D
F-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . B200
F-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . B201
F-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B202
F-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B202

L-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . B558
L-31 L . . . . . . . . . . . . . . . . . . . . . . . B235L
L-31 R . . . . . . . . . . . . . . . . . . . . . . . B235R
L-32 . . . . . . . . . . . . . . . . . . . . . . . . . . . B126
L-33 . . . . . . . . . . . . . . . . . . . . . . . . . . . B127

OD 2 . . . . . . . . . . . . . . . . . . . . . . . . . B2037
OD 21/8 . . . . . . . . . . . . . . . . . . . . . . B2038
OD 21/4 . . . . . . . . . . . . . . . . . . . . . . B2039
OD 23/8 . . . . . . . . . . . . . . . . . . . . . . B2013
OD 21/2 . . . . . . . . . . . . . . . . . . . . . . B2041

F-16
F-17
F-18
F-20
F-21

B202-1
. . . . . . . . . . . . . . . . . . . . . . . . . B202-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
. . . . . . . . . . . . . . . . . . . . . . . . . . . B141
. . . . . . . . . . . . . . . . . . . . . . . . . . . B342

L-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . B118
L-35 . . . . . . . . . . . . . . . . . . . . . . . . . . . B239
L-36 L . . . . . . . . . . . . . . . . . . . . . . . B234L
L-36 R . . . . . . . . . . . . . . . . . . . . . . . B234R
L-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . B112

OD 25/8 . . . . . . . . . . . . . . . . . . . . . . B2042
OD 23/4 . . . . . . . . . . . . . . . . . . . . . . B2043
OD 27/8 . . . . . . . . . . . . . . . . . . . . . . B2014
OD 3 . . . . . . . . . . . . . . . . . . . . . . . . . B2045
OD 31/8 . . . . . . . . . . . . . . . . . . . . . . B2046

B340
B341
. . . . . . . . . . . . . . . . . . . . . . . . . . . B504
. . . . . . . . . . . . . . . . . . . . . . . . . . . B133
. . . . . . . . . . . . . . . . . . . . . . . . . . . B138

L-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . B113
L-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . B461
L-40 . . . . . . . . . . . . . . . . . . . . . . . . . . . B533
L-41 . . . . . . . . . . . . . . . . . . . . . . . . . . . B485
L-42 L . . . . . . . . . . . . . . . . . . . . . . . B134L

OD 31/4
OD 33/8
OD 31/2
OD 35/8
OD 33/4

B139
B132
. . . . . . . . . . . . . . . . . . . . . . . . . . . B339
. . . . . . . . . . . . . . . . . . . . . . . . . . . B337
. . . . . . . . . . . . . . . . . . . . . . . . . . . B136

L-42 R . . . . . . . . . . . . . . . . . . . . . . . B134R
L-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . B125
L-44-12 . . . . . . . . . . . . . . . . . . . B261-12
L-44-16 . . . . . . . . . . . . . . . . . . . B261-16
L-44-18 . . . . . . . . . . . . . . . . . . . B261-18

OD 37/8 . . . . . . . . . . . . . . . . . . . . . . B2052
OD 4 . . . . . . . . . . . . . . . . . . . . . . . . . B2016
OD 51/8 . . . . . . . . . . . . . . . . . . . . . . B2062
OD 51/4 . . . . . . . . . . . . . . . . . . . . . . B2063
OD 53/8 . . . . . . . . . . . . . . . . . . . . . . B2064

B532
. . . . . . . . . . . . . . . . . . . . . . . . . . . B142
. . . . . . . . . . . . . . . . . . . . . . . . . . . B556
. . . . . . . . . . . . . . . . . . . . . . . . . . . B135
. . . . . . . . . . . . . . . . . . . . . . . . . . . B140

L-45-30
L-45-45
L-45-60
L-46-30
L-46-45

.......................

B162
B154
. . . . . . . . . . . . . . . . . . . . . . . B150
. . . . . . . . . . . . . . . . . . . . . . . B246
. . . . . . . . . . . . . . . . . . . . . . . B248

OD 51/2 . . . . . . . . . . . . . . . . . . . . . . B2019
OD 55/8 . . . . . . . . . . . . . . . . . . . . . . B2066
OD 53/4 . . . . . . . . . . . . . . . . . . . . . . B2067
OD 57/8 . . . . . . . . . . . . . . . . . . . . . . B2068
OD 6 . . . . . . . . . . . . . . . . . . . . . . . . . B2069

F-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . B143
F-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . B334
HEX HEAD BOLTS . . . . . . . . . HHCS
L-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . B231
L-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . B101

L-46-60
L-47-30
L-47-45
L-47-60
L-48-30

B250
. . . . . . . . . . . . . . . . . . . . . . . . . N/C
. . . . . . . . . . . . . . . . . . . . . . . B155
. . . . . . . . . . . . . . . . . . . . . . . B159
. . . . . . . . . . . . . . . . . . . . . . . . . N/C

OD 61/8
OD 61/4
OD 63/8
OD 61/2
OD 65/8

L-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . B230
L-12-3 . . . . . . . . . . . . . . . . . . . . . . . . . B359
L-12-31/2 . . . . . . . . . . . . . . . . . . . . . . B360
L-12-4 . . . . . . . . . . . . . . . . . . . . . . . . . B361
L-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B372

L-48-45
L-48-60
NUT 1/4
NUT 3/8
NUT 1/2

B368
B366
. . . . . . . . . . . . . . . . . . . N224WO
. . . . . . . . . . . . . . . . . . . N228WO
. . . . . . . . . . . . . . . . . . . N225WO

OD 63/4 . . . . . . . . . . . . . . . . . . . . . . B2115
OD 67/8 . . . . . . . . . . . . . . . . . . . . . . B2116
OD 7 . . . . . . . . . . . . . . . . . . . . . . . . . B2117
OD 71/8 . . . . . . . . . . . . . . . . . . . . . . B2118
OD 71/4 . . . . . . . . . . . . . . . . . . . . . . B2119

L-16
L-17
L-18
L-19
L-20

.........................

NUT 5/8 . . . . . . . . . . . . . . . . . . . N255WO
NUT 3/4 . . . . . . . . . . . . . . . . . . N275WO
NUT 7/8 . . . . . . . . . . . . . . . . . . . . N278WO
OD 1/4 . . . . . . . . . . . . . . . . . . . . . . . B2023
OD 3/8 . . . . . . . . . . . . . . . . . . . . . . . B2024

OD 73/8
OD 71/2
OD 75/8
OD 73/4
OD 77/8

L-21
L-22

.........................

OD 1/2
OD 5/8

OD 8 . . . . . . . . . . . . . . . . . . . . . . . . . B2125
OD 81/8 . . . . . . . . . . . . . . . . . . . . . . B2126

F-22
F-23
F-24
F-25
F-26

...........................

F-27
F-28
F-29
F-30
F-31

...........................

F-32
F-33
F-34
F-35
F-36

...........................

...........................

...........................

B496-1
B496
. . . . . . . . . . . . . . . . . . . . . . . . . . . B102
. . . . . . . . . . . . . . . . . . . . . . . . . . . B232
. . . . . . . . . . . . . . . . . . . . . . . . . . . B103

...........................

B371-2
B104

...........................

.......................

.......................

.......................
.......................

.......................
.......................

239

B2025
B2026

......................

B2047
B2048
. . . . . . . . . . . . . . . . . . . . . . B2015
. . . . . . . . . . . . . . . . . . . . . . B2050
. . . . . . . . . . . . . . . . . . . . . . B2051
......................
......................

B2110
B2111
. . . . . . . . . . . . . . . . . . . . . . B2112
. . . . . . . . . . . . . . . . . . . . . . B2113
. . . . . . . . . . . . . . . . . . . . . . B2020
......................
......................

B2120
B2121
. . . . . . . . . . . . . . . . . . . . . . B2021
. . . . . . . . . . . . . . . . . . . . . . B2123
. . . . . . . . . . . . . . . . . . . . . . B2124
......................
......................

Tolco to B-Line Cross

.........................

B2032
B2004
. . . . . . . . . . . . . . . . . . . . . . B2011
. . . . . . . . . . . . . . . . . . . . . . B2005
. . . . . . . . . . . . . . . . . . . . . . B2036
......................

Tolco™ to Cooper B-Line Cross Reference
Tolco
Fig#

Tolco
Fig#

Cooper B-Line
Pt. #

Tolco
Fig#

Cooper B-Line
Pt. #

RIGID 2 . . . . . . . . . . . . . . . . . . . . . . B2013
RIGID 21/2 . . . . . . . . . . . . . . . . . . . B2014
RIGID 3 . . . . . . . . . . . . . . . . . . . . . . B2015
RIGID 31/2 . . . . . . . . . . . . . . . . . . . B2016
RIGID 4 . . . . . . . . . . . . . . . . . . . . . . B2017

TSN 3/8 . . . . . . . . . . . . . . . . . . . . . . TN228
TSN 1/2 . . . . . . . . . . . . . . . . . . . . . . TN225
U-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . B107
U-11 . . . . . . . . . . . . . . . . . . . . . . . B116-52
U-12 . . . . . . . . . . . . . . . . . . . . . . . B116-12

OD 87/8 . . . . . . . . . . . . . . . . . . . . . . B2134
OD 9 . . . . . . . . . . . . . . . . . . . . . . . . . B2135
OD 91/2 . . . . . . . . . . . . . . . . . . . . . . B2139
OD 95/8 . . . . . . . . . . . . . . . . . . . . . . B2140
OD 10 . . . . . . . . . . . . . . . . . . . . . . . . B2143

RIGID 5
RIGID 6
RIGID 8
ROL-10
ROL-11

U-13-71/4 . . . . . . . . . . . . . . . . . . . B333-1
U-13-81/2 . . . . . . . . . . . . . . . . . . . B333-2
U-13-103/8 . . . . . . . . . . . . . . . . . B333-3
U-16 . . . . . . . . . . . . . . . . . . . . . B107-22A
U-18 . . . . . . . . . . . . . . . . . . . . . . . . B398-1

OD 103/4 . . . . . . . . . . . . . . . . . . . . B2130
OD 11 . . . . . . . . . . . . . . . . . . . . . . . . B2151
OD 115/8 . . . . . . . . . . . . . . . . . . . . B2156
OD 12 . . . . . . . . . . . . . . . . . . . . . . . . B2159
OD 123/4 . . . . . . . . . . . . . . . . . . . . B2132

ROL-12* . . . . . . . . . . . . . . . . . . . . . . B218
ROL-13 . . . . . . . . . . . . . . . B219 Series
ROL-14 . . . . . . . . . . . . . . . . . . . . . . . B379
ROL-15 . . . . . . . . . . . . . . . . . . . . . . . B479
ROL-16 . . . . . . . . . . . . . B3126 Series

U-22
U-24
U-26
U-29
U-30

OD CP 3/8
OD CP 1/2
OD CP 5/8
OD CP 3/4
OD CP 7/8

B2024DCU
. . . . . . . . . . . . . B2025DCU
. . . . . . . . . . . . . B2026DCU
. . . . . . . . . . . . . B2027DCU
. . . . . . . . . . . . . B2008DCU

SPRA 1/4
SPRA 3/8
SPRA 1/2
SPRA 5/8
SPRA 3/4

......................

N224
N228
. . . . . . . . . . . . . . . . . . . . . . N225
. . . . . . . . . . . . . . . . . . . . . . N255
. . . . . . . . . . . . . . . . . . . . . . N275

U-31 . . . . . . . . . . . . . . . . . . . . . . . . . . . B425
U-32 . . . . . . . . . . . . . . . . . . . . . . . . . . . B519
U-33 . . . . . . . . . . . . . . . . . . . . . . . . . . B581
U-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
UNIV-1/2 . . . . . . . . . . . . . . . . . . . . . B2208

B2030DCU
B2032DCU
. . . . . . . . . . . B2011DCU
. . . . . . . . . . . B2038DCU
. . . . . . . . . . . B2042DCU

SPRA 7/8
SPRC 1/4
SPRC 3/8
SPRC 1/2
SPRC 5/8

......................

N278
N524
. . . . . . . . . . . . . . . . . . . . . N528
. . . . . . . . . . . . . . . . . . . . . N525
. . . . . . . . . . . . . . . . . . . . . N555

UNIV-3/4 . . . . . . . . . . . . . . . . . . . . . B2209
UNIV-1 . . . . . . . . . . . . . . . . . . . . . . . B2210
UNIV-11/4 . . . . . . . . . . . . . . . . . . . B2211
UNIV-11/2 . . . . . . . . . . . . . . . . . . . B2212
UNIV-2 . . . . . . . . . . . . . . . . . . . . . . . B2213

B2046DCU
B2050DCU
. . . . . . . . . . . B2054DCU
. . . . . . . . . . . B2062DCU
. . . . . . . . . . . B2110DCU

SPRC 3/4
SPRD 1/4
SPRD 3/8
SPRD 1/2
SPRD 5/8

N575
N724
. . . . . . . . . . . . . . . . . . . . . . N728
. . . . . . . . . . . . . . . . . . . . . . N725
. . . . . . . . . . . . . . . . . . . . . . N755

W-10 L . . . . . . . . . . . . . . . . . . . . . . B267L
W-10 R . . . . . . . . . . . . . . . . . . . . . . B267R
W-11 L . . . . . . . . . . . . . . . . . . . . . . B269L
W-11 R . . . . . . . . . . . . . . . . . . . . . . B269R
W-12 . . . . . . . . . . . . . . . . . . . . . . . . . . B119

OD 81/4
OD 83/8
OD 81/2
OD 85/8
OD 83/4

Tolco to B-Line Cross

Cooper B-Line
Pt. #
B2127
B2128
. . . . . . . . . . . . . . . . . . . . . . B2129
. . . . . . . . . . . . . . . . . . . . . . B2022
. . . . . . . . . . . . . . . . . . . . . . B2133
......................
......................

.............

OD CP 11/8
OD CP 13/8
OD CP 15/8
OD CP 21/8
OD CP 25/8

...........

OD CP 31/8
OD CP 35/8
OD CP 41/8
OD CP 51/8
OD CP 61/8

...........

...........

...........

B2019
B2120
. . . . . . . . . . . . . . . . . . . . . . B2122
. . . . . . . . . . . . . . . . . . . . . . . B377
. . . . . . . . . . . . . . . . . . . . . . . B376
......................
......................

......................

.....................

.....................

......................

B169, B170
B167, B172
. . . . . . . . . . . . . . . . . . . . . . . . . . . B173
. . . . . . . . . . . . . . . . . . . . . . . . B400-1
. . . . . . . . . . . . . . . . . . . . . . . . B400-3

...................
...................

P-09 . . . . . . . . . . . . . . . . . . . . . . . . B280FL
P-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . B279
P-10 F . . . . . . . . . . . . . . . . . . . . . . B279FL
P-10 SQ . . . . . . . . . . . . . . . . . . . B279SQ
P-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . B280

SPRD 3/4 . . . . . . . . . . . . . . . . . . . . . . N775
SPRM 1/4 . . . . . . . . . . . . . . . . . . . SN224
SPRM 3/8 . . . . . . . . . . . . . . . . . . . SN228
SPRM 1/2 . . . . . . . . . . . . . . . . . . . SN225
SPRM 5/8 . . . . . . . . . . . . . . . . . . . SN255

W-13
W-14
W-16
W-17
W-18

P-11 F . . . . . . . . . . . . . . . . . . . . . . B280FL
P-11 SQ . . . . . . . . . . . . . . . . . . . B280SQ
P-12 . . . . . . . . . . . . . . . . . . . . . . . . . B281A
P-12 F . . . . . . . . . . . . . . . . . . . . B281AFL
P-12 SQ . . . . . . . . . . . . . . . . . B281ASQ

SWF 3/8 . . . . . . . . . . . . . . . . . B446A-3/8
SWF 1/2 . . . . . . . . . . . . . . . . . B446A-1/2
SWF 5/8 . . . . . . . . . . . . . . . . . B446A-5/8
SWF 3/4 . . . . . . . . . . . . . . . . . B446A-3/4
SWFF 3/8 . . . . . . . . . . . . . . . B446C-3/8

W-19 . . . . . . . . . . . . . . . . . . . . . . . . . . B122
W-20 . . . . . . . . . . . . . . . . . . . . . . . . . . B124
W-21 . . . . . . . . . . . . . . . . . . . . . . . . . . B123
W-22 L . . . . . . . . . . . . . . . . . . . . . . B274L
W-22 R . . . . . . . . . . . . . . . . . . . . . . B274R

P-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . B281
P-13 F . . . . . . . . . . . . . . . . . . . . . . B281FL
P-13 SQ . . . . . . . . . . . . . . . . . . . B281SQ
P-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . B585
P-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B278

SWFF 1/2
SWFF 5/8
SWFF 3/4
SWM 3/8
SWM 1/2

B446C-1/2
. . . . . . . . . . . . . . . B446C-5/8
. . . . . . . . . . . . . . . B446C-3/4
. . . . . . . . . . . . . . . . B446B-3/8
. . . . . . . . . . . . . . . . B446B-1/2

W-23
W-24
W-25
Z-10
Z-15

B276
B495
. . . . . . . . . . . . . . . . . . . . . . . . . . B362
. . . . . . . . . . . . . . . . . . . . . . . . . . . B105
. . . . . . . . . . . . . . . . . . . . . . . . . . . B108

PIPE PIER . . . . . . . . . DURA-BLOKS
RIGID 3/8 . . . . . . . . . . . . . . . . . . . . B2001
RIGID 1/2 . . . . . . . . . . . . . . . . . . . . B2008
RIGID 3/4 . . . . . . . . . . . . . . . . . . . . B2009
RIGID 1 . . . . . . . . . . . . . . . . . . . . . . B2010

SWM 5/8 . . . . . . . . . . . . . . . . B446B-5/8
SWM 3/4 . . . . . . . . . . . . . . . . B446B-3/4
SWMF 3/8 . . . . . . . . . . . . . . . . B446-3/8
SWMF 1/2 . . . . . . . . . . . . . . . . B446-1/2
SWMF 5/8 . . . . . . . . . . . . . . . . B446-5/8

Z-17
Z-25

...........................

RIGID 11/4
RIGID 11/2

SWMF 3/4 . . . . . . . . . . . . . . . . B446-3/4
TSN 1/4 . . . . . . . . . . . . . . . . . . . . . . TN224

...................
...................

B2011
B2012

...............

240

B120
B121
. . . . . . . . . . . . . . . . . . . . . . . . . . B271
. . . . . . . . . . . . . . . . . . . . . . . . . . B272
. . . . . . . . . . . . . . . . . . . . . . . . . . B273
..........................
..........................

..........................
..........................

...........................

B586
B515

Index
B22A3 . . . . . . . . . . . . . 21
B22A4 . . . . . . . . . . . . . 21
B22AAL . . . . . . . . . . 177
B22AD3 . . . . . . . . . . . 21
B22AL . . . . . . . . . . . . 177

B24KO6 . . . . . . . . . . . 41
B24KO6AL . . . . . . . 178
B24M . . . . . . . . . . . . . . 42
B24S . . . . . . . . . . . . . . 40
B24S58 . . . . . . . . . . . . 42

B42S . . . . . . . . . . . . . . 40
B42S58 . . . . . . . . . . . . 42
B42SH . . . . . . . . . . . . . 40
B42SHSS4 . . . . . . . 180
B42SS4 . . . . . . . . . . 180

98B . . . . . . . . . . . . . . . . 57
ACPD Series . . . . . 220
ACPW Series . . . . . 220
ACS Series . . . . . . . 221
ADH Series . . . . . . . 219

B22B . . . . . . . . . . . . . .
B22B3 . . . . . . . . . . . . .
B22C . . . . . . . . . . . . . .
B22C3 . . . . . . . . . . . . .
B22D . . . . . . . . . . . . . .

21
21
21
21
21

B24SH . . . . . . . . . . . . . 40
B24SHAL . . . . . . . . . 178
B24SHSS4 . . . . . . . 180
B24SHSS6 . . . . . . . 180
B24SS4 . . . . . . . . . . 180

B44M . . . . . . . . . . . . . . 42
B52 . . . . . . . . . . . . . 32,33
B52A . . . . . . . . . . . 32,33
B52B3 . . . . . . . . . . . . . 32
B52B4 . . . . . . . . . . . . . 32

AHHK-1/4 . . . . . . . .
AHHK-3/8 . . . . . . . .
APC Series . . . . . . .
ARC Series . . . . . . .
ARS Series . . . . . . .

227
227
220
219
219

B22D3 . . . . . . . . . . . . . 21
B22E . . . . . . . . . . . . . . 21
B22E3 . . . . . . . . . . . . . 21
B22H17/8 . . . . . . . . . . 40
B22H17/8AL . . . . . . 178

B24SS6 . . . . . . . . . . 180
B26 . . . . . . . . . . . . . 26,27
B26A . . . . . . . . . . . 26,27
B26B . . . . . . . . . . . . . . 26
B26C . . . . . . . . . . . . . . 26

B52H17/8 . . . . . . . . . . 40
B52H25 . . . . . . . . . . . . 42
B52-I Series . . . . . . 216
B52-IFS . . . . . . . . . . 218
B52KO6 . . . . . . . . . . . 41

ASA Series . . . . . . . 221
ATM-37 . . . . . . . . . . . 221
ATR . . . . . . . . . . . . . . . 58
AWA Series . . . . . . . 219
AWS-CH . . . . . . . . . 221

B22H17/8SS4 . . . . . 180
B22H25 . . . . . . . . . . . . 42
B22-I Series . . . . . . 214
B22-IFS . . . . . . . . . . 218
B22KO6 . . . . . . . . . . . 41

B26H17/8 . . . . . . . . . .
B26H25 . . . . . . . . . . . .
B26KO6 . . . . . . . . . . .
B26S . . . . . . . . . . . . . .
B26S58 . . . . . . . . . . . .

40
42
41
40
42

B52M . . . . . . . . . . . . . . 42
B52S . . . . . . . . . . . . . . 40
B52S58 . . . . . . . . . . . . 42
B52SH . . . . . . . . . . . . . 40
B54 . . . . . . . . . . . . . 34,35

AWS-OH . . . . . . . . . 221
AWS-PH . . . . . . . . . . 221
B11 . . . . . . . . . . . . . 16,17
B11A . . . . . . . . . . . 16,17
B11AL . . . . . . . . . . . . 177

B22KO6AL . . . . . . . 178
B22LPL . . . . . . . . . . . . 21
B22M . . . . . . . . . . . . . . 42
B22PL . . . . . . . . . . . . . 21
B22S . . . . . . . . . . . . . . 40

B26SH . . . . . . . . . . . . . 40
B32 . . . . . . . . . . . . . 28,29
B32A . . . . . . . . . . . 28,29
B32B . . . . . . . . . . . . . . 28
B32C . . . . . . . . . . . . . . 28

B54A . . . . . . . . . . . 34,35
B54AAL . . . . . . . . . . 177
B54AL . . . . . . . . . . . . 177
B54B3 . . . . . . . . . . . . . 34
B54B4 . . . . . . . . . . . . . 34

B11B . . . . . . . . . . . . . .
B11H17/8 . . . . . . . . . . .
B11KO6 . . . . . . . . . . .
B11S . . . . . . . . . . . . . .
B11S58 . . . . . . . . . . . .

17
40
41
40
42

B22S58 . . . . . . . . . . . . 42
B22SH . . . . . . . . . . . . . 40
B22SHA . . . . . . . . . . . 41
B22SHAL . . . . . . . . . 178
B22SHSS4 . . . . . . . 180

B32H17/8 . . . . . . . . . . 40
B32H17/8SS4 . . . . . 180
B32H25 . . . . . . . . . . . . 42
B32-I Series . . . . . . 215
B32-IFS . . . . . . . . . . 218

B54H17/8 . . . . . . . . . . 40
B54H17/8AL . . . . . . 178
B54H17/8SS4 . . . . . 180
B54H17/8SS6 . . . . . 180
B54H25 . . . . . . . . . . . . 42

B11SH . . . . . . . . . . . . . 40
B12 . . . . . . . . . . . . . 18,19
B12A . . . . . . . . . . . 18,19
B12AL . . . . . . . . . . . . 177
B12B . . . . . . . . . . . . . . 18

B22SHSS6 . . . . . . . 180
B22SS4 . . . . . . . . . . 180
B22SS6 . . . . . . . . . . 180
B22TH . . . . . . 38,39,41
B22X . . . . . . . . . . . 20-23

B32KO6 . . . . . . . . . . .
B32M . . . . . . . . . . . . . .
B32S . . . . . . . . . . . . . .
B32S58 . . . . . . . . . . . .
B32SH . . . . . . . . . . . . .

41
42
40
42
40

B54KO6 . . . . . . . . . . . 41
B54KO6AL . . . . . . . 178
B54M . . . . . . . . . . . . . . 42
B54S . . . . . . . . . . . . . . 40
B54S58 . . . . . . . . . . . . 42

B12H17/8 . . . . . . . . . . 40
B12H17/8AL . . . . . . 178
B12KO6 . . . . . . . . . . . 41
B12KO6AL . . . . . . . 178
B12S . . . . . . . . . . . . . . 40

B24 . . . . . . . . . . . . . 24,25
B24A . . . . . . . . . . . 24,25
B24AL . . . . . . . . . . . . 177
B24B . . . . . . . . . . . . . . 24
B24C . . . . . . . . . . . . . . 24

B32SHSS4 . . . . . . . 180
B32SS4 . . . . . . . . . . 180
B42 . . . . . . . . . . . . . 30,31
B42A . . . . . . . . . . . 30,31
B42B . . . . . . . . . . . . . . 30

B54SH . . . . . . . . . . . . . 40
B54SHAL . . . . . . . . . 178
B54SHSS4 . . . . . . . 180
B54SHSS6 . . . . . . . 180
B54SS4 . . . . . . . . . . 180

B12S58 . . . . . . . . . . . . 42
B12SH . . . . . . . . . . . . . 40
B12SHAL . . . . . . . . . 178
B22 . . . . . . . . . . . . 20-23
B22A . . . . . . . . 20,22,23

B24H17/8 . . . . . . . . . . 40
B24H17/8AL . . . . . . 178
B24H17/8SS4 . . . . . 180
B24H17/8SS6 . . . . . 180
B24H25 . . . . . . . . . . . . 42

B42H17/8 . . . . . . . . . . 40
B42H17/8SS4 . . . . . 180
B42H25 . . . . . . . . . . . . 42
B42KO6 . . . . . . . . . . . 41
B42M . . . . . . . . . . . . . . 42

B54SS6 . . . . . . . . . . 180
B56 . . . . . . . . . . . . . 36,37
B56A . . . . . . . . . . . 36,37
B56B3 . . . . . . . . . . . . . 36
B56B4 . . . . . . . . . . . . . 36

241

Index

65XT-3/8 . . . . . . . . . . 114
69 . . . . . . . . . . . . . . . . 115
69R . . . . . . . . . . . . . . . 115
75 . . . . . . . . . . . . . . . . . 55
98 . . . . . . . . . . . . . . . . . 57

Index

Index

B56H17/8 . . . . . . . . . .
B56H25 . . . . . . . . . . . .
B56KO6 . . . . . . . . . . .
B56S . . . . . . . . . . . . . .
B56S58 . . . . . . . . . . . .

101
101
101
101
101

B202-1 . . . . . . . . . . . .
B202-1D . . . . . . . . . . .
B202-2 . . . . . . . . . . . .
B202-2D . . . . . . . . . . .
B202D . . . . . . . . . . . . .

101
101
101
101
101

B203
B204
B205
B206
B210

101
101
101
101
101

B210A . . . . . . . . . . . . 116
B211 . . . . . . . . . . . . . 122
B212-1/4 . . . . . . . . . . 122
B212-3/8 . . . . . . . . . . 122
B213 . . . . . . . . . . . . . 122

101
101
101
101
101

B214L . . . . . . . . . . . .
B214R . . . . . . . . . . . .
B215S . . . . . . . . . . . .
B216S . . . . . . . . . . . .
B217-20 . . . . . . . . . .

101
101
101
101
101

B217-24 . . . . . . . . . . 167
B217AL . . . . . . . . . . . 177
B217FFAL . . . . . . . . 177
B217P . . . 167,177,199
B218 . . . . . . . . . . . . . 147

B129 . . . . . . . . . . . . . .
B132 . . . . . . . . . . . . . .
B133 . . . . . . . . . . . . . .
B134L . . . . . . . . . . . . .
B134R . . . . . . . . . . . . .

73
74
74
79
79

B174SHR
B175SHL
B175SHR
B176SHL
B176SHR

B56SH . . . . . . . . . . . . . 40
B62 . . . . . . . . . . . . . . 201
B62A . . . . . . . . . . . . . 201
B72 . . . . . . . . . . . . . . 202
B72A . . . . . . . . . . . . . 202

B135
B136
B137
B138
B139

..............

74
75
75
74
74

B177SHL
B177SHR
B178SHL
B178SHR
B179SHL

B101 . . . . . . . . . . . . . .
B102 . . . . . . . . . . . . . .
B103 . . . . . . . . . . . . . .
B104 . . . . . . . . . . . . . .
B104SH . . . . . . . . . . .

76
77
77
77
81

B140
B141
B142
B143
B147

..............

74
73
74
74
82

B179SHR
B180SHL
B180SHR
B181SHL
B181SHR

B105 . . . . . . . . . . . . . .
B106-12 . . . . . . . . . . .
B106-32 . . . . . . . . . . .
B106-42 . . . . . . . . . . .
B106-52 . . . . . . . . . . .

91
91
91
91
91

B148
B149
B150
B151
B152

..............

82
82
82
82
82

B182SHL
B182SHR
B183SHL
B183SHR
B184SHL

.........

B107 . . . . . . . . . . . . . . 87
B107-22A . . . . . . . . . . 87
B107S . . . . . . . . . 88,125
B108 . . . . . . . . . . . . . . 91
B109S . . . . . . . . . . . . . 81

B154
B155
B156
B157
B158

..............

82
83
83
83
83

B184SHR
B185SHL
B185SHR
B186SHL
B186SHR

........

B110
B111
B112
B113
B115

B159
B160
B161
B162
B163

..............

...............

91
92
81
81
77

83
83
83
82
82

B187 . . . . . . . . . . . . . .
B188 . . . . . . . . . . . . . .
B189 . . . . . . . . . . . . . .
B190 . . . . . . . . . . . . . .
B191-18 . . . . . . . . . . .

B116-12 . . . . . . . . . . .
B116-32 . . . . . . . . . . .
B116-32A . . . . . . . . . .
B116-42 . . . . . . . . . . .
B116-52 . . . . . . . . . . .

87
87
87
87
87

B164 . . . . . . . . . . . . . . 82
B165 . . . . . . . . . . . . . . 82
B166 Series . . . . . . 171
B166-46 Series . . . 171
B166CL . . . . . . . . . . 171

B191-24 . . . . . . . . . .
B192 . . . . . . . . . . . . .
B194 . . . . . . . . . . . . .
B195 . . . . . . . . . . . . .
B196-18 . . . . . . . . . .

100
100
102
103
102

B230 . . . . . . . . . . . . . .
B231 . . . . . . . . . . . . . .
B232 . . . . . . . . . . . . . .
B234L . . . . . . . . . . . . .
B234R . . . . . . . . . . . . .

76
76
77
79
79

B118
B119
B120
B121
B122

...............

79
94
95
95
95

B167
B168
B169
B170
B171

B196-24 . . . . . . . . . .
B198-6 . . . . . . . . . . .
B198-12 . . . . . . . . . .
B198A-6 . . . . . . . . . .
B198A-12 . . . . . . . .

102
102
102
102
102

B235L . . . . . . . . . . . . .
B235R . . . . . . . . . . . . .
B236L . . . . . . . . . . . . .
B236R . . . . . . . . . . . . .
B237 . . . . . . . . . . . . . .

78
78
78
78
78

B123
B124
B125
B126
B127

..............

95
95
79
80
80

B172 . . . . . . . . . . . . . . 86
B172-12 . . . . . . . . . . . 86
B172-22A . . . . . . . . . . 86
B173 . . . . . . . . . . . . . . 89
B174SHL . . . . . . . . . 101

...............
...............
...............
...............

...............
..............
..............
..............

..............
..............
..............
..............

40
42
41
40
42

..............
..............
..............
..............

..............
..............
..............
..............

..............
..............
..............
..............

..............
..............
..............
..............

..............
..............
..............
..............

..............
..............
..............
..............
..............

86
86
86
86
86

........
.........
........
.........
........
.........
........
.........
........
.........
........
.........
........
.........
........

........
.........
........
.........

.........
........
.........
........

B200 . . . . . . . . . . . . . .
B200D . . . . . . . . . . . . .
B201 . . . . . . . . . . . . . .
B201D . . . . . . . . . . . . .
B202 . . . . . . . . . . . . . .

242

99
99
99
99
99

73
73
73
73
73

73
73
73
73
73

110,167
110,167
. . . . . 110,167,218
. . . . . 110,167,218
. . . . . . . . . . . . . 116
.........
.........

106
106
165
165
167

B219 Series . . 148,149
B220 . . . . . 110,167,218
B221 . . . . . . . . . 110,167
B222 . . . . . . . . . 110,167
B223 . . . . . . . . . 110,167

B238L . . . . . . . . . . . . . 78
B238R . . . . . . . . . . . . . 78
B239 . . . . . . . . . . . . . . 78
B241S . . . . . . . . . . . . 165
B243 . . . . . . . . . . . . . . 82

Index
82
82
82
82
82

B286 . . . . . . . . . 110,167
B287 . . . . . . . . . . . . . 110
B288 . . . . . . . . . . . . . 110
B289-12 . . . . . . . . . . 100
B289-14 . . . . . . . . . . 100

B337
B339
B340
B341
B342

..............

82
82
82
82
82

B290 . . . . . . . . . . . . .
B291 . . . . . . . . . . . . .
B292 . . . . . . . . . . . . .
B293 Series . . . . . .
B293A Series . . . . .

100
100
101
102
102

B346L . . . . . . . . . . . . . 95
B346R . . . . . . . . . . . . . 95
B349 . . . . . . . . . . . . . 108
B350 . . . . . . . . . . . . . 108
B351L Series . . . . . 113

B400 . . . . . . . . . . . . . .
B400-1 . . . . . . . . . . . .
B400-2 . . . . . . . . . . . .
B400-3 . . . . . . . . . . . .
B400-4 . . . . . . . . . . . .

B261 Series . . . . . . .
B266 . . . . . . . . . . . . . .
B267L . . . . . . . . . . . . .
B267R . . . . . . . . . . . . .
B268L . . . . . . . . . . . . .

85
88
94
94
94

B293PL . . . . . . . . . . . 103
B297 Series . . . . . . 101
B300 . . . . . . . . . . . . . . 98
B303 . . . . . . . . . . . . . 117
B304 . . . . . . . . . . . . . 117

B355 . . . . . . . . . . . . . 122
B356 . . . . . . . . . . . . . 146
B357 . . . . . . . . . . . . . . 78
B358 Series . . . . . . . 89
B359 . . . . . . . . . . . . . . 76

B405 . . . . . . . . . . 89,123
B405A . . . . . . . . . . . . 123
B407 Series . . . . . . . 92
B408 Series . . . . . . . 89
B409 Series . . . . . . 101

B268R
B269L
B269R
B270L
B270R

B305
B306
B307
B308
B309

117
117
117
117
117

B360
B361
B362
B363
B364

..............

.............

94
94
94
94
94

76
77
96
83
83

B410-11
B410-12
B410-22
B410-32
B410-52

B271 . . . . . . . . . . . . . .
B272 . . . . . . . . . . . . . .
B273 . . . . . . . . . . . . . .
B274L . . . . . . . . . . . . .
B274R . . . . . . . . . . . . .

95
95
95
96
96

B312 Series . . . . . . 117
B314 . . . . . . . . . . . . . 121
B318 . . . . . . . . . . . . . 123
B319 . . . . . . . . . . . . . 123
B320 . . . . . . . . . . . . . 123

B365
B366
B367
B368
B369

..............

83
83
83
83
83

B411 Series . . . . . . 107
B412 . . . . . . . . . . . . . . 88
B415 . . . . . . . . . . . . . . 90
B420-378 . . . . . . . . . . 76
B420-578 . . . . . . . . . . 76

B276 . . . . . . . . . . . . . .
B277 . . . . . . . . . . . . . .
B278 . . . . . . . . . . . . . .
B279 . . . . . . . . . . . . . .
B279FL . . . . . . . . . . . .

95
96
98
97
97

B321 Series . . . . . . 117
B322 . . . . . . . . . . . . . . 82
B323 . . . . . . . . . . . . . . 82
B324 . . . . . . . . . . . . . . 82
B325 . . . . . . . . . . . . . . 82

B370 . . . . . . . . . . . . . 103
B371 . . . . . . . . . . . . . . 80
B371-2 . . . . . . . . . . . . 81
B372 . . . . . . . . . . . . . . 80
B374 . . . . . . . . . . . . . . 77

B420-778 . . . . . . . . . . 76
B420-978 . . . . . . . . . . 76
B422 Series . . 125,140
B425 . . . . . . . . . . . . . . 88
B427 . . . . . . . . . . . . . 123

B279SQ . . . . . . . . . . .
B280 . . . . . . . . . . . . . .
B280FL . . . . . . . . . . . .
B280SQ . . . . . . . . . . .
B281 . . . . . . . . . . . . . .

97
97
97
97
98

B326
B327
B328
B329
B330

..............

82
82
82
82
82

B376 . . . . . . . . . . . . .
B377 . . . . . . . . . . . . .
B379 . . . . . . . . . . . . .
B380 Series . . . . . .
B381 . . . . . . . . . . . . .

109
109
150
218
107

B428 . . . . . . . . . . . . . . 93
B432 . . . . . . . . . . . . . . 75
B435 . . . . . . . . . . . . . 122
B436 . . . . . . . . . . . . . 166
B436S . . . . . . . . . . . . 166

B281A . . . . . . . . . . . . .
B281AFL . . . . . . . . . .
B281ASQ . . . . . . . . . .
B281FL . . . . . . . . . . . .
B281M . . . . . . . . . . . . .

97
97
97
98
98

B331 . . . . . . . . . . . . . .
B332 . . . . . . . . . . . . . .
B333-1 . . . . . . . . . . . .
B333-2 . . . . . . . . . . . .
B333-3 . . . . . . . . . . . .

82
82
89
89
89

B382 . . . . . . . . . . . . .
B383 . . . . . . . . . . . . .
B384 . . . . . . . . . . . . .
B385 . . . . . . . . . . . . .
B386 Series . . . . . .

107
107
107
107
144

B437 Series . . . . . .
B438 . . . . . . . . . . . . .
B439 . . . . . . . . . . . . .
B440 . . . . . . . . . . . . .
B441-22 Series . . .

B281MSQ . . . . . . . . . 98
B281SQ . . . . . . . . . . . 98
B283 . . . . . . . . . 110,167
B284 . . . . . . . . . 110,167
B285 . . . . . . . . . 110,167

B334 . . . . . . . . . . . . . .
B335 . . . . . . . . . . . . . .
B335-1 . . . . . . . . . . . .
B335-2 Series . . . . .
B335V Series . . . . . .

75
83
83
83
83

B387 Series . . . . . . . 92
B390BX . . . . . . . . . . 166
B390S . . . . . . . . . . . . 166
B392-11 Series . . . 168
B392-12 Series . . . 168

B244
B245
B246
B247
B248

..............

B249
B250
B251
B252
B253

..............

..............
..............
..............
..............

..............
..............
..............

.............
.............
.............
.............

.............
.............
.............
.............
.............

..............
..............
..............

243

..............
..............
..............
..............

..............
..............
..............
..............

..............
..............
..............
..............

75
75
73
73
73

B392-22 Series . . . 168
B392-32 Series . . . 168
B393-1 . . . . . . . . . . . 171
B394 Series . . . . . . 144
B398-1 . . . . . . . . . . . . 90

...........
...........
...........
...........
...........

90
90
90
90
90

93
93
93
93
93

139
107
107
103
121

B441-22A Series . . 121
B441Z-22 . . . . . . . . . 121
B441Z-22A . . . . . . . 121
B444 Series . . . . . . 116
B446 Series . . . 54,172

Index

..............

..............

Index

Index
B446A Series . . 54,172
B446B Series . . 54,172
B446C Series . 54,172
B447 . . . . . . . . . . . . . 168
B447A . . . . . . . . . . . . 168

B515 . . . . . . . . . . . . . . 93
B516 . . . . . . . . . . . . . 167
B516S . . . . . . . . . . . . 167
B518 Series . . . . . . 169
B519 . . . . . . . . . . . . . . 88

B601-62 . . . . . . . . . . 208
B602-A . . . . . . . . . . . 123
B602-B . . . . . . . . . . . 123
B602-C . . . . . . . . . . . 123
B613 . . . . . . . . . 108,125

B767 Series . . . . . .
B768 Series . . . . . .
B769 Series . . . . . .
B802D Series . . . . .
B809B Series . . . . .

B449-4 . . . . . . . . . . . 103
B449-8 . . . . . . . . . . . 103
B449-12 . . . . . . . . . . 103
B449-18 . . . . . . . . . . 103
B450 Series . . . . . . . 86

B521
B522
B526
B527
B528

..............

81
82
91
87
73

B613A . . . . . . . 108,125
B614 . . . . . . . . . 108,125
B616 Series . . . . . . 164
B616-22A Series . . 164
B616S Series . . . . . 164

B810 Series . . . . . . 104
B811 Series . . . . . . 105
B812 Series . . . . . . 105
B816 . . . . . . . . . . . . . 104
B822 . . . . . . . . . . . . . 110

B451-1 . . . . . . . . . . . . 89
B451-2 . . . . . . . . . . . . 89
B451-3 . . . . . . . . . . . . 89
B460 Series . . . . . . 166
B461 . . . . . . . . . . . . . . 81

B529
B532
B533
B534
B535

..............

77
75
80
92
92

B616S-22A Series 165
B616TG-9/16 . . . . . . 165
B617 . . . . . . . . . . 55,172
B619 . . . . . . . . . . . . . 171
B631 Series . . . . . . . 85

B822A . . . . . . . . . . . . 110
B823-22 . . . . . . . . . . 111
B823-22A . . . . . . . . . 111
B823-42 . . . . . . . . . . 111
B823-52 . . . . . . . . . . 111

B464 Series . . . . . .
B465 . . . . . . . . . . . . .
B466S . . . . . . . . . . . .
B466W . . . . . . . . . . .
B472 . . . . . . . . . . . . .

166
166
171
171
106

B536
B538
B539
B541
B556

..............

90
92
92
99
75

B632 Series . . . . . . .
B633 Series . . . . . . .
B634 . . . . . . . . . . . . . .
B635 . . . . . . . . . . . . . .
B650 Series . . . . . . .

85
84
84
84
84

B825-22 . . . . . . . . . . 111
B825-52 . . . . . . . . . . 111
B844 . . . . . . . . . . . . . . 79
B844W . . . . . . . . . . . . 79
B852 . . . . . . . . . . . . . 110

B473 . . . . . . . . . . . . .
B474 . . . . . . . . . . . . .
B475 . . . . . . . . . . . . .
B477 . . . . . . . . . . . . .
B477H . . . . . . . . . . . .

106
106
106
109
109

B557
B558
B560
B562
B568

73
. . . . . . . . . . . . . . 77
. . . . . . . . . . . . . 108
. . . . . . . . . . . . . 108
. . . . . . . . . . . . . . 75

B655 Series . . . . . . . 58
B656 Series . . . . . . . 58
B663 . . . . . . . . . . . . . . 80
B664 . . . . . . . . . . . . . 107
B670 Series . . . . . . 140

B852S Series . . . . . 104
B888W . . . . . . . . . . . . 79
B1508 . . . . . . . . . . . . 132
B1508S . . . . . . . . . . 132
B1512 . . . . . . . . . . . . 132

B477HP . . . . . . . . . .
B477P . . . . . . . . . . . .
B478 . . . . . . . . . . . . .
B478H . . . . . . . . . . . .
B478HP . . . . . . . . . .

109
109
109
109
109

B570 . . . . . . . . . . . . . .
B570A . . . . . . . . . . . . .
B571 . . . . . . . . . . . . . .
B578 . . . . . . . . . . . . . .
B580 . . . . . . . . . . . . . .

B671
B700
B701
B702
B705

B1512S . . . . . . . . . .
B1516 . . . . . . . . . . . .
B1516S . . . . . . . . . .
B1520 . . . . . . . . . . . .
B1520S . . . . . . . . . .

132
132
132
132
132

..............
..............
..............
..............

..............
..............
..............
..............

..............
..............
..............
..............
..............

98
98
96
88
93

Series
Series
Series

140
120
. . . . . . 118
. . . . . . . . . . . . . 119
Series . . . . . . 119
......
......

170
170
170
104
105

B478P . . . . . . . . . . . . 109
B479 . . . . . . . . . . . . . 151
B485 . . . . . . . . . . . . . . 80
B488 . . . . . . . . . . . . . . 82
B494 Series . . . . . . 101

B581 . . . . . . . . . . . . . . 88
B585 . . . . . . . . . . . . . . 98
B586 . . . . . . . . . . . . . . 91
B587 Series . . . . . . 107
B588 . . . . . . . . . . . . . . 87

B718 Series . . . . . . 169
B719AL . . . . . . . . . . . 169
B750 Series . . . . . . 120
B751 . . . . . . . . . . . . . 118
B751-J Series . . . . 118

B1524S
B1532S
B1534S
B1540S
B1548S

..........

132
132
132
132
132

B495 . . . . . . . . . . . . . . 96
B496 . . . . . . . . . . . . . . 81
B496-1 . . . . . . . . . . . . 81
B500 Series . . . 52,120
B501 Series . . . . . . . 52

B589 . . . . . . . . . . . . .
B589-62 . . . . . . . . . .
B590 . . . . . . . . . . . . .
B591 Series . . . . . .
B593 . . . . . . . . . . . . .

171
207
172
145
125

B752 . . . . . . . . . . . . .
B753 Series . . . . . .
B755 . . . . . . . . . . . . .
B755-3/8-J Series .
B756-3/8 . . . . . . . . . .

118
118
119
119
119

B1556S . . . . . . . . . .
B1564S . . . . . . . . . .
B1999 . . . . . . . . . . . .
B2000 . . . . . . . . . . . .
B2001 . . . . . . . . . . . .

132
132
137
128
128

B503L . . . . . . . . . . . . . 80
B503R . . . . . . . . . . . . . 80
B504 . . . . . . . . . . . . . . 74
B514L . . . . . . . . . . . . 106
B514R . . . . . . . . . . . . 106

B594 . . . . . . . . . . . . . . 88
B595 . . . . . . . . . . . . . . 89
B596 . . . . . . . . . . . . . . 88
B598-62 . . . . . . . . . . 210
B600-62 . . . . . . . . . . 204

B760-22 Series . . .
B760-22A Series . .
B761-22 Series . . .
B761-22A Series . .
B766 Series . . . . . .

124
124
124
124
170

B2001AL . . . . . . . . . 178
B2001SS4 . . . . . . . . 181
B2002 . . . . . . . . . . . . 128
B2003 . . . . . . . . . . . . 128
B2004 . . . . . . . . 128,130

244

..........
..........
..........
..........

Index
131
131
131
139
139

B2208
B2209
B2210
B2211
B2212

139
139
139
139
139

B2213 . . . . . . . . . . . . 127
B2301 Series . . . . . 141
B2302 Series . . . . . 141
B2308 . . . . . . . . . . . . 211
B2309 . . . . . . . . . . . . 211

139
139
139
139
141

B2310
B2311
B2312
B2313
B2314

............

B2315
B2350
B2351
B2352
B2353

............

............

141
141
141
141
141

130
130
129
130
130

B2090 . . . . . . . . . . . .
B2091 . . . . . . . . . . . .
B2110 . . . . . . . . . . . .
B2110DCU . . . . . . .
B2111 . . . . . . . . . . . .

141
141
131
129
131

B2354 . . . . . . . . . . . . 211
B2355 . . . . . . . . . . . . 211
B2400 Series . . . . . 138
B2417 Series . . . . . 139
B2500 . . . . . . . . . . . . 217

B2046 . . . . . . . . . . . .
B2046DCU . . . . . . .
B2047 . . . . . . . . .
B2048 . . . . . . . . . . . .
B2050 . . . . . . . . . . . .

130
129
130
130
130

B2112
B2113
B2115
B2116
B2117

............

131
131
131
131
131

B2501 Series . . . . .
B2503 . . . . . . . . . . . .
B2505 . . . . . . . . . . . .
B2506 . . . . . . . . . . . .
B2507 . . . . . . . . . . . .

217
217
217
217
217

B2016SS4 . . . . . . . . 181
B2017 . . . . . . . . 128,130
B2017AL . . . . . . . . . 178
B2017SS4 . . . . . . . . 181
B2018 . . . . . . . . 128,131

B2050DCU . . . . . . .
B2051 . . . . . . . . . . . .
B2052 . . . . . . . . . . . .
B2054 . . . . . . . . . . . .
B2054DCU . . . . . . .

129
130
130
130
129

B2118
B2119
B2120
B2121
B2123

............

............

131
131
131
131
131

B2508
B2601
B2602
B2603
B2608

217
133
133
133
133

B2018AL . . . . . . . . . 178
B2018SS4 . . . . . . . . 181
B2019 . . . . . . . . 128,131
B2019AL . . . . . . . . . 178
B2019SS4 . . . . . . . . 181

B2055
B2056
B2058
B2059
B2060

............

130
130
130
131
131

B2124 . . . . . . . . . . . .
B2125 . . . . . . . . . . . .
B2126 . . . . . . . . . . . .
B2126DCU . . . . . . .
B2127 . . . . . . . . . . . .

131
131
131
129
131

B2609 . . . . . . . . . . . . 133
B2610 . . . . . . . . . . . . 133
B3033 Series . . . . . 114
B3034 Series . . . . . 114
B3036L Series . . . . 113

B2020 . . . . . . . . 128,131
B2020AL . . . . . . . . . 178
B2020SS4 . . . . . . . . 181
B2021 . . . . . . . . 128,131
B2022 . . . . . . . . 128,131

B2062 . . . . . . . . . . . .
B2062DCU . . . . . . .
B2063 . . . . . . . . . . . .
B2064 . . . . . . . . . . . .
B2066 . . . . . . . . . . . .

131
129
131
131
131

B2128
B2129
B2130
B2132
B2207

131
. . . . . . . . . . . . 131
. . . . . . . . 128,131
. . . . . . . . 128,131
. . . . . . . . . . . . 127

B3037Z . . . . . . . . . . . 115
B3322 . . . . . . . . 110,218
B3332 . . . . . . . . 110,218
B3342 . . . . . . . . 110,218
B3352 . . . . . . . . 110,218

B2023 . . . . . . . . . . . .
B2024 . . . . . . . . . . . .
B2024DCU . . . . . . .
B2025 . . . . . . . . . . . .
B2025DCU . . . . . . .

130
130
129
130
129

B2067
B2068
B2069
B2070
B2071

............

B2008SS4 . . . . . . . .
B2009 . . . . . . . . . . . .
B2009AL . . . . . . . . .
B2009SS4 . . . . . . . .
B2010 . . . . . . . . . . . .

181
128
178
181
128

B2026 . . . . . . . . . . . .
B2026DCU . . . . . . .
B2027 . . . . . . . . . . . .
B2027DCU . . . . . . .
B2029 . . . . . . . . . . . .

130
129
130
129
130

B2072
B2073
B2074
B2075
B2076

............

B2010AL . . . . . . . . . 178
B2010SS4 . . . . . . . . 181
B2011 . . . . . . . . 128,130
B2011AL . . . . . . . . . 178
B2011DCU . . . . . . . 129

B2030 . . . . . . . . . . . .
B2030DCU . . . . . . .
B2031 . . . . . . . . . . . .
B2032 . . . . . . . . . . . .
B2032DCU . . . . . . .

130
129
130
130
129

B2077
B2078
B2079
B2080
B2084

............

B2011SS4 . . . . . . . . 181
B2012 . . . . . . . . . . . . 128
B2012AL . . . . . . . . . 178
B2012SS4 . . . . . . . . 181
B2013 . . . . . . . . 128,130

B2036 . . . . . . . . . . . .
B2037 . . . . . . . . . . . .
B2038 . . . . . . . . . . . .
B2038DCU . . . . . . .
B2039 . . . . . . . . . . . .

130
130
130
129
130

B2085
B2086
B2087
B2088
B2089

............

B2013AL . . . . . . . . . 178
B2013SS4 . . . . . . . . 181
B2014 . . . . . . . . 128,130
B2014AL . . . . . . . . . 178
B2014SS4 . . . . . . . . 181

B2041 . . . . . . . . . . . .
B2042 . . . . . . . . . . . .
B2042DCU . . . . . . .
B2043 . . . . . . . . . . . .
B2045 . . . . . . . . . . . .

B2015 . . . . . . . . 128,130
B2015AL . . . . . . . . . 178
B2015SS4 . . . . . . . . 181
B2016 . . . . . . . . 128,130
B2016AL . . . . . . . . . 178

............
............
............
............

245

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............

............
............
............
............

............
............
............

............

............
............
............
............
............

............
............
............
............

............
............
............
............

............
............
............
............
............

127
127
127
127
127

211
211
211
211
211
211
211
211
211
211

Index

B2005 . . . . . . . . 128,130
B2006 . . . . . . . . . . . . 128
B2008 . . . . . . . . 128,130
B2008AL . . . . . . . . . 178
B2008DCU . . . . . . . 129

Index

Index

B3362
B3363
B3364
B3365
B3367

Series
Series
Series
Series
Series

B4051
B4060
B4061
B4062
B4063

............

.....

113
113
113
113
115

B3367S-1 Series .
B3367S-2 Series .
B3373 Series . . . . .
B3690 Series . . . . .
B3690F Series . . . .

140
140
142
143
143

B4064
B4065
B4066
B4067
B4068

............

B4000
B4001
B4002
B4003
B4004

............

175
175
175
175
175

B4069
B4070
B4071
B4072
B4073

............

B4005
B4006
B4007
B4008
B4009

............

175
175
175
175
175

B4074
B4075
B4076
B4077
B4078

............

B4010
B4011
B4012
B4013
B4014

............

B4079
B4080
B4081
B4082
B4083

............

............

175
175
175
175
175

B4015 . . . . . . . . . . . .
B4016 . . . . . . . . . . . .
B4017 . . . . . . . . . . . .
B4033A . . . . . . . . . . .
B4033B . . . . . . . . . .

175
175
175
175
175

B4084
B4085
B4086
B4087
B4088

............

B4033C
B4033D
B4033E
B4033F
B4033G

175
175
175
175
175

B4089
B4090
B4091
B4092
B4093

............

B4094
B4095
B6101
B6102
B6103

............

..........

175
175
174
174
174

B4035D . . . . . . . . . .
B4035E . . . . . . . . . .
B4035F . . . . . . . . . . .
B4037B . . . . . . . . . .
B4050 . . . . . . . . . . . .

174
174
174
174
174

B4033H
B4033I
B4035A
B4035B
B4035C

.....
.....
.....
.....

............
............
............
............

............
............
............
............

............
............
............

..........
..........
..........
...........
..........
..........
...........
...........
..........

............

210
207
207
207
207

B6202
B6205
B6211
B6230
B6232

B6129 . . . . . . . . . . . .
B6132 . . . . . . . . . . . .
B6133 . . . . . . . . . . . .
B6134L . . . . . . . . . . .
B6134R . . . . . . . . . .

203
205
205
207
207

B6234L . . . . . . . . . . .
B6234R . . . . . . . . . .
B6239 . . . . . . . . . . . .
B6337 . . . . . . . . . . . .
B6340 . . . . . . . . . . . .

B6135
B6136
B6138
B6139
B6140

............

205
205
204
204
204

B6341 . . . . . . . . . . . . 204
B6357 . . . . . . . . . . . . 206
B6374 . . . . . . . . . . . . 206
B6409 Series . . . . . 211
B6504 . . . . . . . . . . . . 204

173
173
173
173
173

B6141 . . . . . . . . . . . .
B6142 . . . . . . . . . . . .
B6143 . . . . . . . . . . . .
B6144L . . . . . . . . . . .
B6144R . . . . . . . . . .

204
205
204
206
206

B6526
B6532
B6533
B6557
B6558

............

173
173
173
173
173

B6147
B6148
B6149
B6150
B6151

............

208
208
208
208
208

B6571
B6594
B7105
B7116
B7205

............

173
173
173
173
173

B6152
B6154
B6155
B6156
B6157

............

208
208
208
208
208

BC442 . . . . . . . . . . . . 116
BD40 . . . . . . . . . . . . . 218
BE-5-8 . . . . . . . . . . . .218
BE-9-12 . . . . . . . . . . 218
BFP22 . . . . . . . 184,185

173
173
173
173
173

B6158
B6159
B6160
B6161
B6162

............

208
208
208
208
208

BFP22A . . . . . . 184,185
BFP22H17/8 . . . . . . 184
BFP22I . . . . . . . . . . . 188
BFP22SH . . . . . . . . 184
BFP42 . . . . . . . 186,187

B6163
B6164
B6165
B6167
B6168

............

............

174
174
205
206
206

208
208
208
209
209

BFP42A . . . . . . 186,187
BFP42H17/8 . . . . . . 186
BFP42SH . . . . . . . . 186
BFP409 Series . . . 194
BFP494 Series . . . 194

B6104 . . . . . . . . . . . .
B6105 . . . . . . . . . . . .
B6107 . . . . . . . . . . . .
B6107-62A . . . . . . .
B6108 . . . . . . . . . . . .

206
210
209
209
210

B6169
B6170
B6171
B6172
B6173

............

208
209
209
209
210

BFP2400-2
BFP2400-3
BFP2400-4
BFP2400-6
BFP3104-8

............
............
............
............

............
............
............
............

174
173
173
173
173

B6110
B6112
B6118
B6126
B6127

173
173
173
173
173

173
173
. . . . . . . . . 173
. . . . . . . . . . . . 173
. . . . . . . . . . . . 173
............

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............

246

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............
............

............
............
............
............

203
. . . . . . . . . . . . 211
. . . . . . . . . . . . 211
. . . . . . . . . . . . 205
. . . . . . . . . . . . 206
............

............
............
............
............

207
207
206
205
203

210
205
207
204
206

210
. . . . . . . . . . . . 209
. . . . . . . . . . . . 210
. . . . . . . . . . . . 209
. . . . . . . . . . . . 211

.......
.......
.......
.......
.......

192
192
192
192
193

Index
BFV409 Series . . . .
BFV494 Series . . . .
BFV501 Series . . . .
BFV532 . . . . . . . . . . .
BFV557 . . . . . . . . . . .

194
194
188
197
195

BKB38-094K Series .
BKC100 . . . . . . . . . . .
BKC200 . . . . . . . . . . .
BKCC . . . . . . . . . . . . .
BKF100-4 . . . . . . . . . .

69
59
59
60
61

BMM-5L . . . . . . . . . .
BMM-5S . . . . . . . . .
BMM-6 . . . . . . . . . . .
BMM-6L . . . . . . . . . .
BMM-6S . . . . . . . . .

BFV22I . . . . . . . . . . . 188
BFV22SH . . . . . . . . . 184
BFV42 . . . . . . . 186,187
BFV42A . . . . . . 186,187
BFV42H17/8 . . . . . . 186

BFV558 . . . . . . . . . . .
BFV650 . . . . . . . . . . .
BFV655 Series . . . .
BFV751-1/2 . . . . . . .
BFV751-3/8 . . . . . . .

198
199
190
192
192

BKF100-6 . . . . . . . . . .
BKH-094 Series . . .
BKH-094K Series . .
BKL-063 Series . . . .
BKL-063K Series . .

61
64
64
63
63

BMS-6 . . . . . . . . . . . . .
BMS-6L . . . . . . . . . . .
BMS-6M . . . . . . . . . . .
BMS-6S . . . . . . . . . . .
BMS-8 . . . . . . . . . . . . .

46
47
47
47
46

BFV42SH . . . . . . . . .
BFV100 . . . . . . . . . . .
BFV101 . . . . . . . . . . .
BFV103 . . . . . . . . . . .
BFV104 . . . . . . . . . . .

186
191
198
198
198

BFV751-5/8 . . . . . . .
BFV751J-1/2 . . . . . .
BFV751J-3/8 . . . . . .
BFV751J-5/8 . . . . . .
BFV755-1/2 . . . . . . .

192
192
192
192
193

BKL-094 Series . . . .
BKL-094K Series . .
BKP10063 . . . . . . . . .
BKP10094 . . . . . . . . .
BKP20125 . . . . . . . . .

63
63
60
60
60

BMS-8L
BMS-8M
BMS-8S
BMS-10
BMS-10L

..........

47
47
47
46
47

BFV118
BFV129
BFV132
BFV133
BFV135

...........

198
185
196
196
197

BFV755-3/8 . . . . . . .
BFV2008 . . . . . . . . .
BFV2009 . . . . . . . . .
BFV2010 . . . . . . . . .
BFV2011 . . . . . . . . .

193
191
191
191
191

BKP20188 . . . . . . . . .
BKT-063 Series . . . .
BKT-063K Series . .
BKW063 . . . . . . . . . . .
BKW094 . . . . . . . . . . .

60
66
66
59
59

BMS-10M . . . . . . . . .
BMS-10S . . . . . . . . . .
BMS-12 . . . . . . . . . . .
BMS-12M . . . . . . . . .
BMS-12S . . . . . . . . . .

47
47
46
47
47

BFV136
BFV140
BFV141
BFV142
BFV143

...........

...........

197
196
195
197
196

BFV2012
BFV2013
BFV2014
BFV2015
BFV2016

.........

191
191
191
191
191

BKW125 . . . . . . . . . . .
BKW188 . . . . . . . . . . .
BKYH18-094 . . . . . .
BKYH18-094 Series .
BKYH18-094K Series

59
59
64
65
65

BMS-D-12 . . . . . . . . .
BMS-D-12L . . . . . . . .
BMS-D-12M . . . . . . .
BMT-6 . . . . . . . . . . . . .
BMT-8 . . . . . . . . . . . . .

46
47
47
48
48

BFV200 . . . . . . . . . . .
BFV201 . . . . . . . . . . .
BFV202 . . . . . . . . . . .
BFV-223 . . . . . . . . . .
BFV-223WO . . . . . .

191
195
195
189
189

BFV2017 . . . . . . . . .
BFV3104 -1 thru 6
BFV3104-8 . . . . . . .
BFV3104-10 . . . . . .
BFV3104-12 . . . . . .

191
193
193
193
193

BKYH30-094 . . . . . .
BKYH30-094 Series .
BKYH30-094K Series
BKYT12-063 . . . . . . .
BKYT12-063 Series .

64
65
65
66
67

BMT-10 . . . . . . . . . . . . 48
BMT-12 . . . . . . . . . . . . 48
BMT-D-12 . . . . . . . . . 48
BP081SS . . . . . . . . . 133
BP110SS . . . . . . . . . 133

BFV-224 . . . . . . . . . .
BFV-224WO . . . . . .
BFV-225 . . . . . . . . . .
BFV-225WO . . . . . .
BFV-228 . . . . . . . . . .

189
189
189
189
189

BFVATR Series . . . 190
BFVATRHN Series 190
BFVFW Series . . . . 190
BFVHHCS Series . 189
BFVHN Series . . . . 189

BKYT12-063K Series
BKYT18-063 . . . . . . .
BKYT18-063 Series .
BKYT18-063K Series
BKYT30-063 . . . . . . .

67
66
67
67
66

BP135SS
BP175SS
BP205SS
BP250SS
BP300SS

BFV-228WO . . . . . .
BFV280SQ . . . . . . .
BFV281SQ . . . . . . .
BFV300 . . . . . . . . . . .
BFV334 . . . . . . . . . . .

189
199
199
191
197

BFVSL Series . . . . . 190
BHR1225ZN . . . . . . . 58
BHR1238ZN . . . . . . . 58
BHR1250ZN . . . . . . . 58
BHR1262ZN . . . . . . . 58

BKYT30-063 Series
BKYT30-063K Series
BL1400 Series . . . .
BMM-3 . . . . . . . . . . .
BMM-3L . . . . . . . . . .

BFV337 . . . . . . . . . . .
BFV340 . . . . . . . . . . .
BFV341 . . . . . . . . . . .
BFV342 . . . . . . . . . . .
BFV371-2G . . . . . . .

197
195
196
196
198

BKA25-063 Series
BKA25-063K Series
BKB25-063 Series
BKB25-06K3 Series
BKB38-094 Series

BMM-3S . . . . . . . . . 203
BMM-4 . . . . . . . . . . . 203
BMM-4L . . . . . . . . . . 203
BMM-4S . . . . . . . . . 203
BMM-5 . . . . . . . . . . . 203

...........
...........
...........
...........

...........
...........
...........

.........
.........
.........
.........

.
.
.
.
.

70
70
68
69
68

247

67
67
142
203
203
.

203
203
203
203
203

...........
...........
...........
...........

.........

133
133
133
133
133

BP325SS . . . . . . . . .
BP375SS . . . . . . . . .
BP425SS . . . . . . . . .
BP475SS . . . . . . . . .
BPC Series . . . . . . .

133
133
133
133
127

.........
.........
.........
.........

BTS22TH . . . . . . . 38,39
BVP Series . . . . . . . 135
BVS-12 . . . . . . . . . . . 137
BVS-120 . . . . . . . . . 137
BVT Series . . . . . . . 134

Index

BFP3104-10 . . . . . . 193
BFP3104-12 . . . . . . 193
BFV22 . . . . . . . 184,185
BFV22A . . . . . . 184,185
BFV22H17/8 . . . . . . 184

Index

Index
CLDP10 . . . . . . . . . . 155
CNPSS Series . . . . . 53
DB__DS Series 156,157
DB5 . . . . . . . . . . . . . . 153
DB10 . . . . . . . . . . . . . 153

N222WO . . . . . . . . . . . 46
N223 . . . . . . . . . . . . . . 47
N223WO . . . . . . . . . . . 46
N224 . . . . . . . . . . . . . . 47
N224SS6 . . . . . 179,181

N622WO . . . . . . . . .
N624 . . . . . . . . . . . . .
N624WO . . . . . . . . .
N627 . . . . . . . . . . . . .
N627WO . . . . . . . . .

DB10-28
DB10-36
DB10-42
DB10-50
DB10-60

..........

56
56
56
56
56

.........

154
154
154
154
154

N224WO . . . . . . . . . . . 46
N224WOSS6 . 178,181
N225 . . . . . . . . . . . . . . 47
N225SS6 . . . . . 179,181
N225WO . . . . . . . . . . . 46

N721 . . . . . . . . . . . . . . 47
N722 . . . . . . . . . . . . . . 47
N723 . . . . . . . . . . . . . . 47
N724 . . . . . . . . . . . . . . 47
N724SS6 . . . . . . . . . 179

SLWNM10 . . . . . . . . .
SLWNM12 . . . . . . . . .
SN224 Series . . . . . .
SN224WO Series . .
SN225 Series . . . . . .

56
56
49
48
49

DB20 . . . . . . . . . . . . .
DB30 . . . . . . . . . . . . .
DB40 . . . . . . . . . . . . .
DB48 . . . . . . . . . . . . .
DB610 . . . . . . . . . . . .

153
153
153
153
153

N225WOSS6 . 179,181
N226 . . . . . . . . . . . . . . 47
N226WO . . . . . . . . . . . 46
N227 . . . . . . . . . . . . . . 47
N227WO . . . . . . . . . . . 46

N725 . . . . . . . . . . . . . . 47
N725SS6 . . . . . . . . . 179
N726 . . . . . . . . . . . . . . 47
N727 . . . . . . . . . . . . . . 47
N728 . . . . . . . . . . . . . . 47

SN225WO Series . .
SN228 Series . . . . . .
SN228WO Series . .
SN524 Series . . . . . .
SN525 Series . . . . . .

48
49
48
49
49

DB620 . . . . . . . . . . . .
DB630 . . . . . . . . . . . .
DB640 . . . . . . . . . . . .
DB648 . . . . . . . . . . . .
DBE10-8 . . . . . . . . .

153
153
153
153
155

N228 . . . . . . . . . . . . . . 47
N228SS6 . . . . . 179,181
N228WO . . . . . . . . . . . 46
N228WOSS6 . 179,181
N255 . . . . . . . . . . . . . . 47

N728SS6 . . . . . . . . . 179
N755 . . . . . . . . . . . . . . 47
N775 . . . . . . . . . . . . . . 47
N778 . . . . . . . . . . . . . . 47
N2500 Series . . . . . 217

SN525WO Series . .
SN528 Series . . . . . .
SN724 Series . . . . . .
SN725 Series . . . . . .
SN728 Series . . . . . .

48
49
49
49
49

DBE10-12 . . . . . . . .
DBE10-16 . . . . . . . .
DBM . . . . . . . . . . . . .
DBM-__ Series . . .
DBM-__CT Series

155
155
153
154
154

N255WO . . . . . . . . . . .
N275 . . . . . . . . . . . . . .
N275WO . . . . . . . . . . .
N278 . . . . . . . . . . . . . .
N278WO . . . . . . . . . . .

N7221
N7222
N7224
N7227
NW524

SQN Series . . . . . . . .
SRHMS Series . . . . .
STN224 Series . . . . .
STN225 Series . . . . .
STN228 Series . . . . .

55
53
48
48
48

DBP . . . . . . . . . . . . . .
DBR10-12 . . . . . . . .
DBR2-31/2 . . . . . . .
DBR4-6 . . . . . . . . . .
DBR8-10 . . . . . . . . .

153
155
158
158
158

N521 . . . . . . . . . . . . . . 47
N522 . . . . . . . . . . . . . . 47
N523 . . . . . . . . . . . . . . 47
N524 . . . . . . . . . . . . . . 47
N524SS6 . . . . . 179,181

NW525 . . . . . . . . . . . .
NW528 . . . . . . . . . . . .
NWM6 . . . . . . . . . . . . .
NWM8 . . . . . . . . . . . . .
NWM10 . . . . . . . . . . . .

STN525 Series . . . . .
TN221 . . . . . . . . . . . . .
TN222 . . . . . . . . . . . . .
TN223 . . . . . . . . . . . . .
TN224 . . . . . . . . . . . . .

48
48
48
48
48

DBR12-14 . . . . . . . . 158
DBR16-20 . . . . . . . . 158
DCN 3/8 . . . . . . . . . . . . 52
FFW Series . . . . . . . . 56
FW Series . . . . . . . . . 56

N525 . . . . . . . . . . . . . . 47
N525SS6 . . . . . 179,181
N525WO . . . . . . . . . . . 46
N525WOSS6 . . . . . 179
N526 . . . . . . . . . . . . . . 47

NWM12 . . . . . . . . . . . . 49
SA101 . . . . . . . . . . . . 227
SA102 . . . . . . . . . . . . 227
SA110 . . . . . . . . . . . . 227
SA131 . . . . . . . . . . . . 227

TN225
TN226
TN227
TN228
TN255

.............

.............

48
48
48
48
48

HHCS Series . . . . . . 53
HN Series . . . . . . . . . . 55
IPH Series . . . . . . . . 136
IPH18230 . . . . . . . . . 136
ISO . . . . . . . . . . . . . . . 137

N527 . . . . . . . . . . . . . . 47
N528 . . . . . . . . . . . . . . 47
N528SS6 . . . . . 179,181
N555 . . . . . . . . . . . . . . 47
N555WO . . . . . . . . . . . 46

SA154
SA155
SA158
SA276
SA318

TN525

.............

48

LW Series . . . . . . . . .
MSQN Series . . . . . .
N221 . . . . . . . . . . . . . .
N221WO . . . . . . . . . . .
N222 . . . . . . . . . . . . . .

N575 . . . . . . . . . . . . . . 47
N575WO . . . . . . . . . . . 46
N621 . . . . . . . . . . . . . 203
N621WO . . . . . . . . . 203
N622 . . . . . . . . . . . . . 203

SC228 . . . . . . . . . . . . .
SC-UB . . . . . . . . . . . . .
SFHMS Series . . . . .
SHHMS Series . . . . .
SLWN1/4 . . . . . . . . . .

.........
.........
.........
.........

56
55
47
46
47

46
47
46
47
46

248

203
203
203
203
203

203
. . . . . . . . . . . . 203
. . . . . . . . . . . . 203
. . . . . . . . . . . . 203
. . . . . . . . . . . . 49
............

49
49
49
49
49

227
227
223-226
223-226
223-226

............
............
.......
.......
.......

57
57
53
53
56

SLWN1/2
SLWN3/8
SLWN5/8
SLWNM6
SLWNM8

..........
..........
..........
..........

.............
.............
.............

Cooper B-Line reserves the right to make changes to the specifications, materials, equipment, prices, or the
availability of products at any time without prior notice. While every effort has been made to assure the
accuracy of information contained in this catalog at the time of publication, we cannot accept responsibility
for inaccuracies resulting from undetected errors or omissions.

Global Locations
Cooper B-Line’s U.S. Customer Service
Center is staffed Monday through Friday from
7 a.m. to 5:00 p.m. Central Standard Time.
If a situation requires that you have to contact
us after hours, please leave a message via
phone or E-mail so we can give it immediate
attention the following business day.

Service Facility - Canada:
Cooper B-Line - Canada
Div. of Cooper Ind. Canada, Inc.
5925 McLaughlin Road
Mississauga, ON L5R 1B8
Canada
Phone: (800) 569-3660
Fax: (888) 753-3355
Email: blinecanada@cooperindustries.com

Service Facility - United States:
Cooper B-Line - USA
509 West Monroe Street
Highland, IL 62249
United States
Phone: (800) 851-7415
Fax: (800) 356-1438
Email: blineus@cooperindustries.com

Service Facility - Europe:
Cooper B-Line, Ltd. - UK
Walrow, Highbridge
Somerset, TA9 4AQ
United Kingdom
Phone: + 44 (0) 1278 783371
Fax: + 44 (0) 1278 789037
Email: sales@cooperbline.co.uk

Cooper B-Line - Saudi Arabia:
PO Box 70160 - Al Khobar - 31952
Kingdom of Saudi Arabia
Phone: 00966 3 812 2236
Fax: 00966 3 812 1291
Email: blineme@cooperindustries.com
Literature Fulfillment Questions:
Phone: (314) 426-1800
Fax: (314) 426-6022
Email: cooperbline@repcographics.com
Request Literature Website:
http://order.repcographics.com/cooperb/

Cooper B-Line
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917

www.cooperbline.com

Cooper US, Inc.
600 Travis, Ste. 5600
Houston, TX 77002-1001
Phone: 713-209-8400
www.cooperindustries.com

© 2012 Cooper B-Line, Inc.

SS-12

Printed in U.S.A.

401211



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2012:01:11 12:52:49Z
Modify Date                     : 2012:11:21 13:03:50-06:00
Subject                         : This catalog provides product details and information on channels, hardware, fittings, accessories, clamps, straps for steel, aluminum, stainless steel and fiberglass.
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (**PANTONE 200 C).%%CMYKCustomColor: 0 1 .63 .12 (**PANTONE 200 C).%%EndComments
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : QuarkXPress(tm) 6.0
Creator Tool                    : QuarkXPress(tm) 6.0
Metadata Date                   : 2012:11:21 13:03:50-06:00
Document ID                     : uuid:a33981d4-3c85-11e1-929a-0017f2c99344
Instance ID                     : uuid:16842967-84b8-43ee-a601-e48c3a1cfd20
Format                          : application/pdf
Title                           : Cooper B-Line - Strut Systems - Complete Catalog
Description                     : This catalog provides product details and information on channels, hardware, fittings, accessories, clamps, straps for steel, aluminum, stainless steel and fiberglass.
Creator                         : 
Page Count                      : 252

EXIF Metadata provided by EXIF.tools