FORM 11 ACL ACN 2ACL 2ACN AS COMPRESSIONx 127652 Catalog
2014-10-22
: Pdf 127652-Catalog 127652-Catalog Batch9 unilog
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
SERIES ACL, ACN, 2ACL, 2ACN and AS Compression Connectors for Aluminum or Copper Conductor ILSCO TOOLS 94285 Hand Tool (C) ILC-12H-N ILC-12-N, ILC-12, ILC-12H ILC-14, ILC-14H 12 Ton ILCB-12-N, ILCB-12, ILCB-12-LIO 12 Ton Battery ILC-15H, ILC-15 15 Ton ILC-30H 30 Ton 1 IDT-6, IDT-6H 6.2 Ton Dieless IDTB-6, IDTB-6-LIO 6.2 Ton Dieless Battery IDTB-12, 12 Ton Dieless Battery (C) Color Code Die Code Left Die Right Die No. of Crimps MT-25 Hand Dieless (C) 8 Blue 2 M K 2 1 1 6 Gray 3 K K 2 1 1 1 1 1 1 4 Green 4 H H 3 1 2 2 1 1 1 2 Pink 7/6 E A 3 2 1/3 1/3 1 1 1 1 Gold 7/6 E A 4 2 1/4 1/4 1 2 1 1/0 Tan 8 A C 5 2 1 1 1 2 1 Compression Terminals ACL, 2ACL, AS, ACN, 2ACN (A) IDT-12, IDT-12H 11 Ton Dieless (C) IDT-12-N 15 Ton Dieless (C) 2/0 Olive 10 A B 4 2 1 1 1 2 1 3/0 Ruby 10 A A 4 2 2 2 1 3 1 2 4/0 White 12 1 1 1 3 2 250 Red 13 2 2 1 3 2 300 Blue 14 2 2 1 4 2 350 Brown 14 2 2 1 4 2 400 Green 16 3 3 1 4 2 500 Pink 16A 3 3 1 4 2 600 Black 17 4 4 1 4 2 700 750 1000 Purple Yellow Brown 17 18 20 4 5 4 5 3 1 1 1 4 4 2 2 2 (A) Number of crimps shown on chart must be on each end of the AS splicer connectors. (B) The ACL, 2ACL, ACN, 2ACN AND AS connectors are marked with color, the die numbers and required number of crimps for ILSCO hydraulic tools. When using other listed tools, consult chart for crimps required. Crimps should be evenly space on connector. (C) The ILSCO MT-25, ILSCO 94284, Burndy MY29-3 and all dieless tools are not color coded or do not contain the die index. (D) Consult manufacturers data for catalog numbers of dies for each tool. Connector Installation 1. Select proper ACL, ACN, 2ACL, 2ACN or AS connector for the wire size to be used. Series can be used with concentric, compressed or compact aluminum or copper wire. 2. Strip wire insulation using an approved method. Do not nick or ring the wire. Remove any mylar coating on the wire. 4. Insert wire all the way into the barrel of the connector. 5. Select the proper die for approved tool. See chart above for approved tools and dies. Compress tang from tang toward wire, or from inside of AS connector toward wire. 6. When terminating an aluminum connector to a steel or copper stud, use a belleville or compression type washer in combination with a flat washer. Tighten until the belleville washer is flat. 3. Remove surface oxides from the wire with a wire brush. Page 1 of 3 FORM 11 Revised July 30, 2004 SERIES ACL, ACN, 2ACL, 2ACN AND AS Compression Connectors for Aluminum or Copper Conductor BURNDY TOOLS (B) (D) Compression Terminals ACL, 2ACL, AS, ACN, Color Code 2ACN (A) MY29-3 Die Code Hand (C) Y34A Y35 Y39 Y45 Y46 Y48B T & B TOOLS (B) (D) Y644M Dieless (C) Die Code TBM 8 Hand 13642 12 Ton TBM 15 15 Ton Anderson Greenlee 21940 40 Ton Versa-Crimp Dieless (C) 1990 Dieless (C) 8 Blue 374 1 24 1 1 2 6 Gray 346 1 1+ 1 1 1 29 2 2 2 2 4 Green 375 1 1+ 1 1 1 37 2 2 2 2 1 1 2 Pink 348 2 1+ 1 1 1 42 2 2 4* 2 1 1 1 Gold 471 2 1+ 1 1 1 45 3 3 3 3 2 1 1/0 Tan 296 2 1+ 1 1 1 1 50 3 3 3 3 2 1 2/0 Olive 297 2 2+ 2 2 1 1 54 3 3 6* 3 2 1 3/0 Ruby 467 2 2+ 2 2 1 1 60 3 3 3 3 2 1 4/0 White 298 2 2+ 2 2 1 1 66 5 4* 2 2 3 2 250 Red 324 2 2+ 2 2 1 1 71 5 4* 4* 2 3 2 300 Blue 470 2+ 2 2 1+ 1 76 5 4* 2 2 3 2 350 Brown 299 2 2 1+ 1 87 6 4* 4* 2 3 2 400 Green 472 4 4 2+ 1 94 4* 4* 2 4 2 500 Pink 300 4 4 2+ 1 99 4* 4* 2 4 2 4 4 600 Black 473 4 2+ 1 106 4* 2 2 700 Purple 936 4 2 1 112 4* 4* 2 2 2 750 Yellow 936 4 2 1 115 4* 4* 2 2 1000 Brown 302 2+ 1 140 4* 2 2 (A) Number of crimps shown on chart must be on each end of the AS splicer connectors. (C) The ILSCO MT-25, ILSCO 94284, Burndy MY29-3 and all dieless tools are not color coded or do not contain the die index. (B) The ACL, 2ACL, ACN, 2ACN AND AS connectors are marked with color, the die numbers and required number of crimps for ILSCO hydraulic tools. When using other listed tools, consult chart for crimps required. Crimps should be evenly space on connector. (D) Consult manufacturers data for catalog numbers of dies for each tool. + These Burndy Tools are listed for use with die and nest indentor combinations. * T & B half dies require twice the number of crimps. Page 2 of 3 Form 11 Revised July 30, 2004 Series ACL, ACN, 2ACL, 2ACN and AS for ILSCO IDT-12, IDT-12-N, IDTB-6, IDT-6, IDT-6H and Burndy Y644M Dieless Tools For Aluminum or Copper Conductors Compression Terminals ACL, ACN, AS 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500 600 700 750 1000 Standard Wire Size 6 AWG 4 AWG 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 MCM 300 MCM 350 MCM 400 MCM 500 MCM 600 MCM 700 MCM 750 MCM 1000 MCM Expanded Wire Size 6 AWG 4 - 6 AWG 2 - 6 AWG 1 - 2 AWG 1/0 - 1 AWG 2/0 - 1 AWG 3/0 - 1 AWG 4/0 - 1 AWG 250 MCM - 1/0 AWG 300 MCM - 2/0 AWG 350 MCM - 3/0 AWG 400 MCM - 4/0 AWG 500 MCM - 4/0 AWG 600 MCM - 250 MCM 700 MCM - 350 MCM 750 MCM - 500 MCM 1000 MCM - 750 MCM No. Crimps for No. Crimps for ILSCO IDTB-6, ILSCO IDT-12, IDTB-6-LIO, IDT-12-N and IDT-6 and IDT6H Burndy Y644M 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 3 3 3 4 4 4 4 4 4 4 Second Crimp optional for the 2ACL, 2ACN Series Number of crimps shown on chart must be on each end of the AS splicer connectors Page 3 of 3 FORM 11 Revised July 30, 2004
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Author : dsmiley Create Date : 2012:05:01 15:13:37+04:00 Modify Date : 2012:05:11 15:54:16-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : dsmiley Title : FORM 11-ACL-ACN-2ACL-2ACN-AS COMPRESSION.xlsx Creator Tool : PrimoPDF http://www.primopdf.com Metadata Date : 2012:05:11 15:54:16-04:00 Producer : Nitro PDF PrimoPDF Document ID : uuid:7578460e-3143-46d9-8ffe-279a19995039 Instance ID : uuid:17211884-d14c-49d5-a2cd-21373a225ef6 Page Count : 3EXIF Metadata provided by EXIF.tools