Industrial Wiring Devices Full Line Catalog 139354
2016-10-27
: Pdf 139354-Catalog 139354-Catalog B6 unilog
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
SECTION GFCI Personnel Safety Devices This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com SmartLock PRO ™ GFCI Devices SmartLockPRO GFCI devices comply with 2006 UL requirements ™ HOSPITAL GRADE COMMERCIAL GRADE • Power/Diagnostic Indicator • 15 & 20Amp Configurations • Back and Side Wired • Color Match Test/Reset Buttons • Power/Diagnostic Indicator • 15 & 20 Amp Configurations • Back and Side Wired • Color Match Test/Reset Buttons (Monochromatic) SmartLockPRO™ GFCI Device Types • Green LED Indicates Power and Confirms Proper Wiring Status • Resistant to Surge, Noise, and Corrosion 7899-HGR Per 2006 UL Requirements PAGE F3, Section H PAGE F3 COMBO HIGH CURRENT • 15 Amp Single GFCI Receptacle with Single-Pole Switch • Switch Rated 15A at 120V AC • Back and Side Wired • Color Match Test/Reset Buttons (Monochromatic) • Resistant to Surge, Noise, and Corrosion Per 2006 UL Requirements 7299-A 8895-80E PAGE F3 WORK LIGHT ANGLE PLUGS Recognized Component GFCI Cord Sets • 15A & 20A 125V; 15A & 20A 240V • Automatic and Manual Reset Types • Orange Power Status Indicator • Yellow Cord 14/3 SJT • Resistant to Surge, Noise, & Corrosion Per 2006 UL Requirements PAGES F6 & F7 Right Angle GFCI Plugs • 15A 125V; 20A 125V • Automatic and Manual Reset Types • Power Status Indicator • Available in Dark Gray and Yellow • Consult factory for availability 66591-WL 36596 Panel Mount GFCI with 16" Leads • 20A 125V • Orange LED Indicator Light • Weather-Resistant Housing & Test/Reset Buttons • Resistant to Surge, Noise, and Corrosion Per 2006 UL Requirements PAGE F4 Recognized Component Blank Face • Contact Rating: 20A 125V • Control Relay: 80 Amps 240V AC Max. • Side Wired • Color Match Test/Reset Buttons (Monochromatic) • Resistant to Surge, Noise, and Corrosion Per 2006 UL Requirements PAGE F4 Recognized Component 66591-25C 1 7599-LW • Resistant to Surge, Noise, and Corrosion Per 2006 UL Requirements • 6" leads ideal for OEM applications PAGE F3 (Monochromatic) CORD SETS F • (Monochromatic) 7599-T • Resistant to Surge, Noise, and Corrosion Per 2006 UL Requirements PANEL MOUNTS • Power/Diagnostic Indicator • 15 & 20 Amp Configurations • Back and Side Wired • Color Match Test/Reset Buttons (Monochromatic) • 20 Amp with Switch Rated Test/ Reset Buttons • Back and Side Wired • Color Match Test/Reset Buttons PAGE F3 w/Wire Leads • Resistant to Surge, Noise, and Corrosion Per 2006 UL Requirements BLANK FACE 7590-W COMMERCIAL GRADE Fluorescent Work Light with GFCI Protected Receptacle • 13 Watt Lamp and Receptacle • Black Body with 20' Yellow Cord 16/3 SJTW • NEMA 5-15R Receptacle; NEMA 5-15P Plug • Automatic Reset In-Line GFCI with Power Status Indicator 16593 PAGE F4 PAGE F4 NEW UL943 GFCI SAFETY STANDARDS POWER CENTER PB101-SGF “THE BOX”™ • 6 GFCI Protected 20A 125V Straight Blade or Locking Receptacles • GFCI Protected 30A 250V Locking Receptacle • 50A 125/250V Non-NEMA Power Connections • Meets OSHA Regulation 20, Subpart K Standards • UL Listed for Outdoor Use PAGE F8 To learn more about Leviton devices or for answers to technical questions call our Techline at Effective July 28, 2006 See Page F10 for Full Details 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com SmartLockPRO ™ GFCI Features UL Standard 943 Class A (GFCI) & 498 (Receptacles) CSA Certified (File #057) Meets July 28, 2006 UL Requirements Thick-walled, impact-resistant thermoplastic nylon cover and body withstands abuse Heavy duty double wipe for 15 Amp contacts and triple wipe for 20 Amp contacts “Surge hardened” electronics offer superior resistance to surges and overvoltages. Silver alloy contacts for reliable make/break switching. Patented lockout feature prevents “RESET” if GFCI is not functioning properly or miswired due to reversal of line and load leads. LED power indicator light helps diagnose improper wiring and, when illuminated, offers visual confirmation that power is available. Eight back-wire holes (two per terminal) and back-wire ground. 7599-W Provisions for backor side-wiring. Leviton SmartLockPRO™ icon ensures improved GFCI product design. Lockout action blocks the “RESET” button if GFCI protection has been compromised. COMPONENT Nylon Back Polycarbonate Line Contacts Brass Terminal Screws Brass #8-32 Grounding Screw Brass #8-32 Yoke Zinc Steel Clamp Nuts Internal Contacts Steel Silver Alloy NEMA ANSI WD1&WD6 C-73 STANDARDS & CERTIFICATIONS UL UL 943 CSA Listed Class A & 498 U U #E48380 U #LR-57811 Dual function LED offers indication of line/load reversal & power availability. Leviton SmartLockPRO™ and The New 2006 UL943 GFCI Safety Standards DESCRIPTION Face SmartLockPRO™ GFCI Features Triple combination terminal screws. Line-Load Reversal Indication New UL 2006 Standard: • If a miswiring (line-load reversal) occurs during installation, the GFCI must not be capable of supplying power to either the GFCI’s face or to feed-through terminals. “End-of-Life” Indication New UL 2006 Standard: • GFCIs are required to provide a visual and/or audible NOM #057 indication OR be able to render themselves incapable of delivering power when they no longer offer ground fault protection based on a failure to pass their internal test. For additional details on these new requirements, see page F10. To learn more about Leviton devices or for answers to technical questions call our Techline at 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com F 2 15A 125V & 20A 125V Hospital & Commercial Grade, GFCI’s ELECTRICAL DIELECTRIC VOLTAGE CURRENT INTERR. Withstands 1500V per UL 498 2kA TERMINAL TERMINAL I.D. ACCOMMODATION Brass, hot 80ºC max at full rated current after 50 cycles overload at 150% rated current for both AC and DC appl. per UL 498 TRIP LEVEL 5±1 mA STANDARDS & CERTIFICATIONS MECHANICAL TEMP. RISE #14 - #12 AWG solid or stranded copper wire Grounding Silver, neutral NEMA ANSI WD-6 C-73 PRODUCT I.D. Ratings permanently marked on device UL UL 943 Fed Spec Class A Listed & 498 WC-596 U U U ENVIRONMENTAL – CSA NOM C22.2 #LR-57811 #057 MISC. MOTOR CONTROL RATING FLAMMABILITY OPERATING TEMP. Rated V-2 per UL 94 -35ºC to 65ºC 15A-1875W 20A-2500W Hospital & Commercial Grade GFCI Devices Back & Side Wired FACE COLOR 7899-HGR 7599-I 7599-LI 7590-W GFCI HOSPITAL GRADE SMARTLOCKPRO ™ DUPLEX w/ LED GFCI COMMERCIAL GRADE SMARTLOCKPRO ™ DUPLEX w/ LED GFCI COMMERCIAL GRADE SMARTLOCKPRO ™ DUPLEX w/ LED GFCI COMMERCIAL GRADE BLANK FACE S-P SWITCH 1.5HP@120V AC Meets 2006 UL Requirements Meets 2006 UL Requirements Meets 2006 UL Requirements Meets 2006 UL Requirements Brown Ivory White Gray Red Black Almond Lt. Almond 7599-HG 7599-HGI 7599-HGW 7599-HGG 7599-HGR – 7599-HGA 7599-HGT Brown Ivory White Gray Red Black Almond Lt. Almond 7899-HG 7899-HGI 7899-HGW 7899-HGG 7899-HGR 7899-HGE 7899-HGA 7899-HGT FACE COLOR w/ 6" Leads. 15A 125V, NEMA 5-15R; 20A 125V Feed-Through – 7599 7599-I 7599-LI 7599-W 7599-LW 7599-G – 7599-R – 7599-E – – 7599-A 7599-T – 20A 125V, NEMA 5-20R at Receptacle & Feed-Through 7899 – 7899-I 7899-LI 7899-W 7899-LW 7899-G – – – 7899-E – 7899-A – 7899-T – GFCI COMBO DEVICE RECEPTACLE & SINGLE-POLE SWITCH – 7590-I 7590-W – – 7590-E 7590-A 7590-T – – – – – – – – SHALLOW WALLBOX EXTENDER FOR GFCI's COLOR Meets 2006 UL Requirements 15A 125V, NEMA 5-15R; 20A 125V Feed-Through Ivory White Almond Brown Ivory White 7299-I 7299-W 7299-A 6197 6197-I 6179-W 7299-A 0.94 (23.88 mm) 0.94 (23.88 mm) 20 AMP 2.7 (68.6 mm) 4.21 (106.93 mm) 2.7 (68.6 mm) 4.21 (106.93 mm) 125V 3.81 (96.77 mm) 3.28 (83.81 mm) 2.62 (66.55 mm) 0.29 (7.37 mm) 3.81 (96.77 mm) 3.28 (83.81 mm) CLASS 0.29 (7.37 mm) GFCI GFCI 3.70 (93.98 mm) 7899-HG SERIES 4.21 (106.93 mm) 1.31 (33.27 mm) 2.74 (69.60 mm) 3 1.19 (30.23 mm) 4.21 (106.93 mm) 3.70 (93.98 mm) F 2.74 (69.60 mm) 2.62 (66.55 mm) LEVITON CLASS A 1.12 (28 mm) 1.12 (28 mm) 1.19 (30.23 mm) 1.31 (33.27 mm) 7599 SERIES 1.53 (38.9 mm) 1.7 (43.2 mm) 1.7 (43.2 mm) 7590 SERIES To learn more about Leviton devices or for answers to technical questions call our Techline at 7299 SERIES 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 1.53 (38.9 mm) e www.barr-thorp.com www.leviton.com 15A 125V & 20A 125V Commercial Grade, GFCI’s ELECTRICAL DIELECTRIC VOLTAGE CURRENT INTERR. Withstands 1500V per UL 498 2kA STANDARDS & CERTIFICATIONS MECHANICAL TEMP. RISE TERMINAL TERMINAL I.D. ACCOMMODATION Brass, hot 30ºC max at full rated current after 50 cycles overload at 150% rated current for both AC and DC per UL 498 TRIP LEVEL 5±1 mA #18- #12 AWG Grounding Silver, neutral NEMA ANSI WD-6 C-73 PRODUCT I.D. Ratings permanently marked on device UL UL 943 Fed Spec Class A Listed & 498 WC-596 U U U ENVIRONMENTAL – CSA NOM C22.2 #LR-57811 #057 MISC. MOTOR CONTROL RATING FLAMMABILITY OPERATING TEMP. Rated V-2 per UL 94 -35ºC to 66ºC 15A-1875W 20A-2500W Recognized Component* Right Angle GFCI Plugs PLUG COLOR Refer to footnote 16594 under Right Angle GFCI Plugs Table 16893 16593 ANGLE PLUG AUTOMATIC RESET Black Yellow 86593 Right Angle Plugs Accessory ANGLE PLUG MANUAL RESET AUTOMATIC RESET COLOR 15A 125V, NEMA 5-15P 20A 125V, NEMA 5-20P 16593 – 16893 – – 16594 WATERPROOF COVER WITH GROUND PIN UP ORIENTATION MANUAL RESET Clear – 16894 86593 *Catalog numbers 6593, 6893, 6594 and 6894 series are available – consult factory. For additional information, see catalog L-100, page H5. High Current GFCI Rated 20A-125 VAC Contact Rating: 20A 125V AC Load Capability with 125V Control Relay 80@240V AC Max. PANEL MOUNT FOR TEMPORARY POWER DISTRIBUTION BOXES TOGGLE COLOR 36597 PANEL MOUNT GFCI FOR PHASE-CONTROL THEATER DIMMING SYSTEMS Ivory Front View 36895 Recognized Component BLANK FACE RESET BUTTONS Side View 8895-80I White 8895-80W Black 8895-80E Recognized Component GFCI-Protected Fluorescent Work Light w/Receptacle 15A 125V, 2-P 3-W Grounding LENGTH GFCI CORD SET, YELLOW CORD, 16/3 SJTW BLACK BODY, ON/OFF POWER SWITCH, 13 WATT LAMP 20’ NEMA PLUG G 66591-WL W Commercial Grade GFCI Devices Wiring Termination Area NEMA CONNECTOR 5-15P G W 5-15R 2.58 (65.5 mm) OFF .810 (20.6 mm) 2.7 (68.6 mm) 20 AMP FOLLOW DIRECTIONS SUIVEZ INSTRUCTION 4.21 (106.93 mm) 125V .023 REF. 5.12 (130 mm) 4.75 (121 mm) 2.7 (68.6 mm) TEST TEST 3.8 (96.5 mm) ON RESET CLASS 1.29 DIA. (33 mm) SWITCH TEST MONTHLY TEST MENSUEL TEST 1.77 (45 mm) LEVITON CLASS A 2.40 (64 mm) GFCI RESE ~~~~~~~ ~~~~~~ ~~~~~~~ 1.83 DIA. (49 mm) 1.60 DIA. (41 mm) RESET 1.74 (44.2 mm) GROUND FAULT CIRCUIT INTERRUPTER-MISC. MOTOR CONTROLLER AND SWITCH 15A 125V RECEPTACLE 1.12 (28 mm) 1.26 (32 mm) 1.7 (43.2 mm) 36596, 36597, 36895 RIGHT ANGLE GFCI PLUGS To learn more about Leviton devices or for answers to technical questions call our Techline at 8895 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com F 4 GFCI Cord Set Features Water-resistant SJTW-A cable (14/3 for 15A, 12/3 for 20A) GFCI Cord Set Features Available in 2-ft., 6-ft. and 25-ft. lengths, except where indicated Equipped with Industrial Grade plugs and connectors to provide long service life in heavy-duty applications Agency Standards RTV injected at cord entrance and exit of the housing • Complies with UL Standard 943 as a Recognized Component Class A GFCI power supply with open neutral protection Choice of Automatic or Manual reset models • UL Listed (File #E-48380), 15A devices also CSA Certified (File #LR-5781) • Fully complies with NEC code article #527.6, 6(A) and 6(B) and OSHA regulation CFR 1926-404b(i)(ii) for construction sites Power indicator light goes OFF if GFCI trips, power is interrupted or line cord is unplugged GFCI Cord Set Features • In-line GFCI units are NEMA 3R Water-resistant enclosure sealed by ultrasonic welding to ensure long service life 69593-3 Cat. No. 66591-WL Provides lighting and GFCI protection in out-of-the-way locations Custom lengths and configurations available as special order Manual Reset GFCI Cord Sets with Wetguard® plugs and connectors provide outstanding corrosion-resistance where water is present GFCI Protection: An OSHA Requirement on the Job Site OSHA definitely means business, with fines for willful violations reaching as high as $70,000! The second most common OSHA electrical violation at construction sites involves non-compliance with either the Assured Equipment Grounding Program or Ground Fault Protection. Whichever program you choose, portable GFCI Cord Sets or an approved grounding conductor program, make sure it is used 100% of the time. Ignoring OSHA requirements can cost money as well as business. Compliance with OSHA and NEC standards is absolutely mandatory, and use of Leviton GFCI Cord Sets is a reliable, economical way to accomplish that. GFCI Cord Sets Must Have Open-Neutral Protection Open-Neutral Protection immediately trips the GFCI if the neutral conductor on the line side is opened. This eliminates the possibility of the GFCI Cord Set having a live hot leg, even though it may appear as though power is off due to the open neutral. A normal GFCI receptacle would not be able to trip under these conditions. Automatic vs. Manual Reset Cord Sets Automatic Reset GFCI Cord Sets (black body) automatically reset ON when power is restored. Manual Reset units (yellow body) will not automatically reset after power interruption; the reset button must be pushed in. F 5 Automatic Reset GFCI Cord Sets and Extension Cords – Black Body • Automatically resets to ON when plugged in or after power interruption • Available in 2-ft, 6-ft and 25-ft lengths except where indicated To learn more about Leviton devices or for answers to technical questions call our Techline at 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com 15A 125V& 250V;20A 125V & 250V Automatic Reset GFCI Cord Sets & Power Supply Cords ELECTRICAL DIELECTRIC VOLTAGE CURRENT INTERR. Withstands 1500V per UL 498 2kA TERMINAL TERMINAL I.D. ACCOMMODATION Brass, hot 5±1 mA Not Applicable Grounding Silver, neutral PRODUCT I.D. Ratings permanently marked on device ENVIRONMENTAL NEMA ANSI WD-6 C-73 UL UL 943 Fed Spec Class A Listed & 498 WC-596 U U U – CSA #LR-57811 #057 MISC. MOTOR CONTROL RATING FLAMMABILITY OPERATING TEMP. Rated V-2 per UL 94 -35ºC to 66ºC 15A-1875W 20A-2500W Automatic reset GFCI cord sets (black body) automatically reset ON when power is restored. 66891-3 66593-3 66591-25C FACTORY-ASSEMBLED CORD SETS — Consult Techline for changes in length and/or configurations. LENGTH GFCI CORD SET AUTOMATIC RESET (15 AMP) 14/3 SJTW (20 AMP) 12/3 SJTW YELLOW CORD, BLACK BODY BLACK PLUG & CONNECTOR NEMA PLUG NEMA CONNECTOR 15A 125V, Cord Sets 2' 6' 25' 66591-2C 66591-6C 66591-25C 5-15P 5-15R 15A 125V, Cord Set Triple Outlet 3' 66593-3 5-15P 5-15R 15A 125V, Locking Cord Set 3' 66597-3 L5-15P L5-15R 15A 125V, Power Supply Cord 37' 26591-37C – 5-15P 15A 240V, Power Supply Cord 35' 26592-E – 6-15P 20A 125V, Cord Sets 3' 66891-3 5-20P 5-20R 20A 125V, Locking Cord Set 3' NOM C22.2 Automatic Reset GFCI Cord Sets & Power Supply Cords 30ºC max at full rated current after 50 cycles overload at 150% rated current for both AC and DC per UL 498 TRIP LEVEL STANDARDS & CERTIFICATIONS MECHANICAL TEMP. RISE 66897-3 L5-20P L5-20R 20A 125V, Power Supply Cord 37' 36591-37C – 5-20P 20A 240V, Power Supply Cord 35' 36592-E – 6-20P To learn more about Leviton devices or for answers to technical questions call our Techline at 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com F 6 15A 125V;20A 125V 1 YEAR LIMITED Manual Reset GFCI Cord Sets ELECTRICAL DIELECTRIC VOLTAGE CURRENT INTERR. Withstands 1500V per UL 498 2kA TERMINAL TERMINAL I.D. ACCOMMODATION Brass, hot TRIP LEVEL 5±1 mA STANDARDS & CERTIFICATIONS MECHANICAL TEMP. RISE 30ºC max at full rated current after 50 cycles overload at 150% rated current for both AC and DC per UL 498 Not Applicable Grounding Silver, neutral PRODUCT I.D. Ratings permanently marked on device NEMA ANSI WD-6 C-73 UL UL 943 Fed Spec Class A Listed & 498 WC-596 U U U ENVIRONMENTAL – CSA #LR-57811 #057 MISC. MOTOR CONTROL RATING FLAMMABILITY OPERATING TEMP. Rated V-2 per UL 94 -35ºC to 66ºC 15A-1875W 20A-2500W Manual reset units (yellow body) will not automatically reset after power interruption; the reset button must be pushed in. 69591-W3 69891-3 Manual Reset GFCI Cord Sets FACTORY-ASSEMBLED CORD SETS - Consult Techline for changes in length and/or configurations. LENGTH GFCI CORD SET MANUAL RESET (15 AMP) 14/3 SJTW (20 AMP) 12/3 SJTW YELLOW CORD,YELLOW BODY YELLOW PLUG & CONNECTOR NEMA PLUG NEMA CONNECTOR 15A 125V, Cord Sets 3' 25' 69591-3 69591-25 5-15P 5-15R 15A 125V, Cord Set Triple Outlet 3' 69593-3 5-15P 5-15R 15A 125V, W/ Wetguard Plug & Connector Cord Set 3' 25' 69591-W3 69591-W25 5-15P 5-15R 20A 125V, W/ Wetguard Plug & Connector Cord Set 3' 69891-W3 5-20P 5-20R 69591-W3 1.78 (45.2 mm) 69593-3 6.70 (170.2 mm) 36.0 (914.4 mm) 6.70 (170.2 mm) 0.63 (15.6 mm) 2.50 (63.5 mm) (9.32 ± 2 mm) 15A AUTO GFCI CORD 66591-2C — on page F6 To learn more about Leviton devices or for answers to technical questions call our Techline at 2.50 (63.5 mm) TEST RESET 7 RESET 1.63 (41.1 mm) TEST BEFORE EACH USE F TEST FOLLOW DIRECTIONS 0.367± 0.07 MANUAL RESET GFCI CORD 69591-W3 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com NOM C22.2 www.leviton.com 50A 125/250V 1 YEAR LIMITED Power Center “THE BOX” & Power Cords ELECTRICAL CURRENT INTERR. Withstands 1500V per UL 498 2kA STANDARDS & CERTIFICATIONS MECHANICAL TEMP. RISE TERMINAL TERMINAL I.D. ACCOMMODATION Brass, hot 30ºC max at full rated current after 50 cycles overload at 150% rated current for both AC and DC per UL 498 TRIP LEVEL 5±1 mA Not Applicable Grounding White,neutral NEMA ANSI WD-6 C-73 PRODUCT I.D. Ratings & NEMA I.D. permanently marked on device U UL UL 943 Fed Spec Class A Listed & 498 WC-596 U U ENVIRONMENTAL – CSA NOM C22.2 #LR-57811 #057 OSHA FLAMMABILITY OPERATING TEMP. Rated V-2 per UL 94 -35ºC to 66ºC “The Box” Meets Regulation 20, Part 1926, Subpart K Standards Power Distribution Box Available with or without GFCI Protection on 30A Receptacles Consult Factory for Other Configurations Power Inlet Non-NEMA 50A, 125/250V Catalogue No. Power Outlet Non-NEMA 50A, 125/250V 6 NEMA Locking Receptacles 20A, 125V, L5-20R 6 NEMA Straight Blade Receptacles 20A, 125V, 5-20R 1 NEMA Locking Receptacle 30A, 250V, L6-30R PB101-SGF No GFCI ✔ Protection No GFCI ✔ Protection GFCI ✔ Protection GFCI ✔ PB101-000 No GFCI ✔ Protection No GFCI ✔ Protection GFCI ✔ Protection No GFCI ✔ Protection PB103-SGF No GFCI ✔ Protection No GFCI ✔ Protection GFCI ✔ Protection GFCI ✔ Protection PB103-000 No GFCI ✔ Protection No GFCI ✔ Protection GFCI ✔ Protection No GFCI ✔ Protection Protection Power Cords Features Flexible, Abrasion-Resistant Construction Offering Reliable Performance to -31ºF LENGTH FACTORY-ASSEMBLED CORD SETS BLACK FLEXIBLE CORD w/ YELLOW & WHITE (3) #6 AWG and (1) #8 WEATHER-RESISTANT PLUG AWG CONDUCTORS NON-NEMA YELLOW & WHITE WEATHER-RESISTANT CONNECTOR NON-NEMA 50A 125/250V, NON-NEMA Y 50' 100' †Consult KRS-A9519 KUS-A9519 Y X EQ GR X W NON-NEMA† 16.00 TER CEN MEET TO 50A 125V/20A 125V/20A in. OUTL OSHA UTION NON-NEMA† Factory for Other Configurations. 125V/20A in. 22 EQ GR W END VIEW 1 ETR EMENTS OUTDOO CORD REQUIR LISTEDSUPPLY 125/250V UL USE POWER RIB DIST E Temporary Portable Power Distribution Center/GFCI & Power Cords DIELECTRIC VOLTAGE SIDE VIEW 1 POW RY INLE OSHA TO MEET TEMPO T RA R ATION ONLY. NEL only. INFORM Shock, Use PERSON center . SAFETY ED service f and el. ed Rainproolocationsof Electic of Source provided QUALIFI are personn Leg BY authoriz e in damp the Risk lt protected. Supply One & 30A n for USE by Enclosur use Defects at the Position. 20A Than . for - To Reduce Supplying ground-fau are fault in FORService 3R Unit Not More protectio TypeSuitable This the Upright usedGrounding of if there Wiring es rated ground fault 50A are be t Protected Other CAUTION in with A 70. Contact Ground or Not 305-6(b) OnlyAll receptacl ground s rated Who Are Not Provided el must Equipmen ANSI/NFP Cord provided withReceptacle is Section Circuit n Persons es not personn the Protectio Extension an Assuredby l Code, for in anthe Unit.receptacl n n with defined Electrica as All protectio 250V/0.5A conjunctio National Program the Fuse Rating: R EMENTS CORD OUTDOO REQUIR LISTEDSUPPLY 125/250V UL USE POWER 50A 11BK Cat. /20A GFCI for 30A-2 RECE 50V PTAC LE No. POWERUNIT UTION Meet to Made OSHA Requirements 0A V/2 -SGF PB103 125 12 in. LISTEDLE PORTAB DISTRIB s Volts e Amp 50 50 125/2 Hz, 4-Wir 60 125V 0A V/3 250 250V/30A 12 in . TOP VIEW n. 0i .5 19 125V/20A Weather Resistant Cover For 30A Locking Recept. END VIEW 2 To learn more about Leviton devices or for answers to technical questions call our Techline at Circuit Breaker Cover SIDE VIEW 2 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com F 8 GFCI Accessories 1 YEAR LIMITED 5977-CL 4992 5977-GY 4998-GY 5997-CL 5997-GY Single-Gang Flush Cover Wallplates GFCI Accessories TYPE Gray Die-Cast Gray Die-Cast Gray Die-Cast Gray Die-Cast Gray Die-Cast Gray Die-Cast Gray Plastic White Plastic Gray Plastic White Plastic MOUNTING POSITION Zinc Zinc Zinc Zinc Zinc Zinc SINGLE-GANG FLUSH COVER Vertical Horizontal Vertical Horizontal Horizontal Vertical Horizontal Horizontal Vertical Vertical FITS TYPE OF BOX 6196-V 6196 6196-VFS 6196-FS 4990 4992 4996-GY 4996-W 4998-GY 4998-W Standard Standard FS (4 Screws) FS (4 Screws) Standard Standard Standard Standard Standard Standard Raintight While-In-Use Covers TYPE MOUNTING POSITION Gray Plastic Gray Plastic Clear Plastic Clear Plastic Gray Plastic Gray Plastic Clear Plastic Clear Plastic 3.30 (83.8 mm) SINGLE-GANG FLUSH COVER FITS TYPE OF BOX Vertical Vertical Mount w/ Extra Deep Cover Vertical 5977-GY 5977-DGY Vertical Mount w/ Extra Deep Cover Horizontal Horizontal Mount w/ Extra Deep Cover Horizontal Horizontal Mount w/ Extra Deep Cover 5977-DCL Outdoor-Type Boxes 5997-GY 5997-DGY or Flush-Mounted Surface-Mounted 5977-CL Wall Boxes 5997-CL 5997-DCL 3.75 (95.6 mm) 6.59 (167.4 mm) 5.46 (138.7 mm) 2.88 (73.2 mm) Ø 0.63 (16.0 mm) cord opening Ø 0.25 (6.4 mm) padlock opening 5.05 (128.3 mm) F 9 Ø 0.25 (16.0 mm) cord opening 5977 To learn more about Leviton devices or for answers to technical questions call our Techline at 5997 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com SmartLock PRO ™ Information SmartLockPRO and The New 2006 UL943 GFCI Safety Standards Underwriter’s Laboratories (UL) has issued new requirements on GFCI functionality effective July 28, 2006: Line-Load Reversal Indication If an old style GFCI is miswired with a line-load reversal, it is a potentially hazardous situation because the GFCI receptacle face will be live and unprotected even after the GFCI is tripped. 2003 UL Standard: • There must be a diagnostic indicator if a miswiring (lineload reversal) occurs during installation. However, the GFCI receptacle’s face may still be live and unprotected. New UL 2006 Standard: • If a miswiring (line-load reversal) occurs during installation, the GFCI must not be capable of supplying power to either the GFCI’s face or to feed-through terminals. • SmartLockPRO provides a true dead-face design with an LED indicator for line-load reversals. • There are no requirements related to “end of life” New UL 2006 Standard: • GFCIs are required to provide a visual and/or audible indication OR be able to render themselves incapable of delivering power when they no longer offer ground fault protection based on a failure to pass their internal test. The SmartLockPRO Solution: • Though a standard GFCI CAN be reset even if it is not providing protection…the SmartLockPRO ’s reset button will not engage if protection has been compromised. With SmartLockPRO ’s unique patented professional grade end-oflife lock-out action you can avoid having a live, unprotected receptacle in the event that the GFCI can no longer provide protection. The robust design of SmartLockPRO GFCIs also greatly reduces the frequency of GFCI failures, contributing to a longer GFCI service life. The Choice for 2006 UL End-of-Life Indication: Protection or No Protection? Other GFCI manufacturers have taken the alternate route in the 2006 UL Standard by providing an indicator light for endof-life indication. They allow the compromised GFCI to be reset, thereby permitting it to continue delivering unprotected power to the GFCI face and downstream receptacles. We disagree with this approach. GFCIs are first and foremost proven safety devices. The National Electrical Code requires GFCIs to be installed in bathrooms, kitchens, workshops and other locations where water is present and there’s a risk of ground fault shock hazard. Leviton believes that a GFCI should be replaced immediately if it no longer provides ground fault protection. There is absolutely no people protection when a compromised GFCI functions as a “live” standard receptacle. That’s why Leviton’s SmartLockPRO GFCI performs a selftest every time it is reset. If it is not capable of responding to a ground fault, the reset is blocked. Leviton’s SmartLock PRO approach locks out a compromised GFCI, thereby providing the safest and smartest solution to people protection. SmartLockPRO ™ Information The SmartLockPRO Solution: “End-of-Life” Indication GFCIs reach the end of their service life when they no longer provide ground fault protection. As with any electronic device, a GFCI can be damaged by surges, other electrical disturbances, or environmental and physical abuse. 2003 UL Standard: General Testing Procedures Non-Lockout Style GFCI SmartLockPRO GFCI Plug a lamp or radio into the GFCI receptacle. Plug a lamp or radio into the GFCI receptacle. Turn ON lamp or radio. Turn ON lamp or radio. Push the TEST button on the GFCI. If the GFCI is working properly, it will trip and power to the lamp or radio will be cut off. Push reset button to restore power. Push the TEST button on the SmartLockPRO GFCI. The GFCI will trip and power to the lamp or radio will be cut off. Your GFCI is working properly and should be retested every month. If power did not go off: If power did not go off when you pushed the TEST button, then the GFCI is not providing protection and should be replaced immediately. Standard GFCIs can still be reset and provide power even though they are not providing protection. Your GFCI is working properly if you can push the RESET button on the SmartLockPRO GFCI to restore power to the lamp or radio. IMPORTANT: The RESET button will not restore power if the GFCI is damaged and cannot respond to a ground fault. That’s why we developed SmartLockPRO… To learn more about Leviton devices or for answers to technical questions call our Techline at 1-800-824-3005 or visit us at: This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 e www.barr-thorp.com www.leviton.com F 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Tim Title : Industrial Wiring Devices Full Line Catalog.pdf Create Date : 2011:02:24 12:16:30 Creator Tool : Adobe Acrobat 10.0.1 Modify Date : 2011:04:08 11:27:06-06:00 Metadata Date : 2011:04:08 11:27:06-06:00 Producer : GPL Ghostscript 8.15 Document ID : uuid:2b1ba9ad-bbe3-43c7-a461-785f9f6f2b08 Instance ID : uuid:52107093-bb5c-4654-b6b0-8adbfe1cb794 Page Count : 11 Author : TimEXIF Metadata provided by EXIF.tools