Product Detail Manual

109139-Catalog 109139-Catalog 109139-Catalog 084705 Batch5 unilog cesco-content

110677-Attachment 110677-Attachment 110677-Attachment 084705 Batch5 unilog cesco-content

: Pdf 16217-Attachment 16217-Attachment 084705 Batch4 unilog

Open the PDF directly: View PDF .
Page Count: 44

Download
Open PDF In Browser	View PDF

Professional
Insulated Tools
Supporting
Arc Flash Protection

from

Innovations that work
10,000 Volt
Tested
1000 Volt Rated

2
Arc Flash Protection:
Wiha Insulated tools can be a vital component in your Arc Flash
protection strategy. What is Arc Flash?

ARC FLASH
An Arc Flash is an electrical explosion due to a fault condition or short
circuit when either a phase to ground or phase to phase conductor is
connected. Arc flashes cause electrical equipment to explode, resulting in an arc-plasma fireball. Temperatures may exceed 35,000° F (the
surface of the sun is 9000° F). These high temperatures cause rapid
heating of surrounding air and extreme pressures, resulting in an arc
blast. The arc blast will likely vaporize all solid copper conductors which
will expand up to 67,000 times its original volume when it is vaporized.
The result of this violent event is usually destruction of the equipment
involved, fire, and severe injury or death to any nearby people.

WHY ARC FLASHES HAPPEN
There are a variety of reasons why an Arc Flash can occur, but most
of them are preventable. Most arc flashes occur when maintenance
workers are manipulating live equipment for testing or repair and
accidentally cause a fault. Improper tools, improper electrical
equipment, corrosion of equipment, improper work techniques and lack
of training are just some of the events that can lead to a devastating
arc flash or arc blast.

Wiha Insulated Wrenches
Description	

Page

Insulated Open End Spanners	 4-5
Insulated Gear Wrenches	

6

Ins. Offset Ring Wrenches	

7-8

Wiha Insulated Adjustable Wrenches
Description	

Page

Insulated Adjustable Wrenches	 5
8.0, 10.0, 12.0, 15.0”

Wiha Insulated L-keys
Description	

Page

Insulated L-keys	

9

ARC FLASH COMPLIANCE
There are 4 main regulations that govern electrical safety & arc flash:
1. OSHA Standards 29CFR, Part 1910. Occupational Safety and
Health Standards. 1910 sub part S (electrical) Standard number
1910.333 specifically addresses Standards for Work Practices and
references NFPA 70E. OSHA 29CFR 1910.335 (a) (1)(i) requires the
use of protective equipment when working where a potential electrical
hazard exists and 29CFR 1910.132(d)(1) which requires the employer
assess the workplace for hazards and the need for personal protective
equipment. OSHA compliance is required by any plant building or facility.
2. The National Fire Protection Association (NFPA) Standard 70 2002 “The National Electrical Code” (NEC) contains requirements for
warning labels.
3. NFPA 70E provides guidance on implementing appropriate work
practices that are required to safeguard workers from injury while
working on or near exposed electrical conductors or circuit parts that
could become energized. Part II 2-1.3.3 regarding Arc Flash Analysis
states that a “Flash Hazard Analysis shall be done before a person
approaches any exposed electrical conductor or circuit part that has
not been placed in an electrical safe work condition”. This Arc Flash
Hazard Analysis must be done to determine the level of Personal
Protection Equipment PPE that a worker must use, and the Arc Flash
Boundary in inches along with the incident energy found at each
location. Each panel must be marked with an ANSI z535 approved Arc
Flash Warning Label.
4. The Institute of Electronics and Electrical Engineers (IEEE) 1584 –
2002 Guide to Performing Arc-Flash Hazard Calculations
copyright © information by: American Trainco, Inc.
http://www.martinarcflash.com

OSHA
Wiha tools assists with compliance of OSHA 29CFR 1910
(Sub Parts electrical standard)

Wiha Insulated 3/8” Hex Drive Bit Sockets
Description	

Page

Ins. 3/8” Hex Dr. Bit Sockets	 10

Wiha Insulated Electrician’s Knives
Description	

Page

Insulated Knives	

8

Wiha Insulated Socket Accessories
Description	

Page

Insulated Sockets 1/4, 3/8, 1/2”	 10-14
Insulated Ratchets

10,13,15

Insulated T-handle

10,13,15

Insulated Extension Bars

11,13,15

Wiha Insulated Cable Cutters
Description	

Page

Insulated Cable Cutters	

15

3
3
Wiha Insulated Hacksaw

Wiha Insulated Tools

Description	

Page

Description			

Page

Insulated Hacksaw	

15

Xeno Terminal Block		
Combination Screwdrivers	

26

Insulated TorqueControl	
Handle & Blade Holder

18

Wiha Insulated Multi-Bit Holders
Description	

Page

Insulated Multi-Bit Drivers	

18

Insulated 			
26
Single-Pole Voltage Detector	
Insulated Hex			
Inch/Metric T-handles

Wiha Insulated SlimLine Tools

17
	

Description	

Page

Insulated Slotted Drivers

23-24

Insulated SlimLine Handle	

19

Insulated Phillips Drivers

23-24

Insulated SlimLine Blades

19-20

Insulated SlimLine Blade Sets	 20
Insulated SlimLine Drivers	

21

Insulated SlimLine Driver Sets	 22

Wiha Insulated BitFlip Sets
Description	

Page

Insulated BitFlip Sets	

27

Wiha Insulated Belt Pack Pouch Sets
Description	

Page

Insulated Belt Pack Pouches	

28

Pliers & Cutters
Pliers/Cutters & Screwdrivers
Pliers/Cutters & Multi Bit Set

Wiha Insulated Inomic Pliers

Insulated Torx Drivers	

26

Insulated Nut Drivers	

25-26

Insulated Square Tip Drivers 24
Retaining Ring Bit Holder

27

Insulated Tweezers		

16

Wiha Insulated 1000Volt Pliers/Cutters
Description	

Page

Insulated Lineman’s Pliers	

34

Insulated Combination Pliers	 34
Insulated Heavy Duty	
Diagonal Cutters

35

Insulated Serrated Edge	
Cable Cutter

35

Description	

Page

Insulated Bent Nose Pliers	

36

Insulated Inomic Pliers	

37

Insulated Long Nose Pliers	

36

Inomic Combo Pliers
Inomic Long Nose Pliers
Inomic Diagonal Cutters

Insulated Round Nose Pliers	 36

Wiha Insulated Industrial Pliers/Cutters
Description	

Page

Insulated Industrial Pliers/Cutters	 38-41

Insulated Stripping Pliers	
Insulated Pliers Sets

37
29-33

4
Wiha Insulated Open-End Wrenches
Insulation Test Standards:
Insulation according to ASTM F-1505-01,
EN/IEC 60900, VDE 0680, DIN 7446
and CSA

Each tool individually
tested to 10,000 volts
and certified to 1000
Volt ac or 1500 Volt dc
Insulation
High visibility, grip is
double coated

Steel
Forged from chrome
vanadium, meets - DIN 3110
Angled 15 O

1000V

1000Volt
1000Volt

WH20190 14 Piece Insulated Inch Open End Wrench Set

Item			
No.		
Inch	
	WH20190 WH 20133	 5/16	
WH 20135	 3/8	
	
WH 20136	 7/16	
	
WH 20137	 1/2	
	
WH 20138	 9/16	
	
WH 20140	 5/8	
	
WH 20141	 11/16	
	

OAL			
Inch		
Inch	
WH 20142	 3/4	
3.9	
WH 20144	 13/16	
4.1	
WH 20145	 7/8	
4.6	
WH 20146	 15/16	
5.5	
WH 20147	 1	
5.7	
WH 20148	 1-1/16	
6.2	
WH 20149	 1-1/8	
6.5	

OAL
Inch	
7.0	
7.5	
7.6	
7.9	
8.4	
9.2	
9.1	

lbs.
5.70

WH20091 15 Piece Insulated Metric Open End Wrench Set
Item			
OAL				
OAL
No.		
mm	 mm			
mm	 mm	
WH20091
WH 20014	 14	 150	
WH 20006	 6.0	 97	
	
WH 20015	 15	 151	
WH 20007	 7.0	 98	
	
WH 20016	 16	 164	
WH 20008	 8.0	 104	
	
WH 20017	 17	 162	
WH 20009	 9.0	 108	
	
WH 20019	 19	 178	
WH 20010	 10.0	 107	
	
WH 20022	 22	 196	
WH 20011	 11.0	 118	
	
WH 20024	 24	 211	
WH 20012	 12.0	 129	
	
WH 20013	 13.0	 137					
	

1000Volt

1000Volt

WH20093 8 Piece Insulated Metric Open End Wrench Set

WH20192 8 Piece Insulated Inch Open End Wrench Set

Item			
No.		
Inch	
WH20192
WH 20133	 5/16	
	
WH 20135	 3/8	
	
WH 20136	 7/16	
	
WH 20137	 1/2	
	

OAL				
Inch			
Inch	
WH 20138	 9/16	
3.9	
WH 20140	 5/8	
4.1	
WH 20141	 11/16	
4.6	
WH 20142	 3/4	
5.5	

OAL
Inch	
5.7	
6.2	
6.5	
7.0	

lbs.
3.0

lbs.
1.59

Item			
No.		
mm	
WH20093
WH 20006	 6.0	
	
WH 20007	 7.0	
	
WH 20008	 8.0	
	
WH 20010	 10.0	
	

OAL				
mm			
mm	
WH 20013	 13.0	
97	
WH 20014	 14.0	
98	
WH 20017	 17.0	
104	
WH 20019	 19.0	
107	

OAL
mm	
137	
150	
162	
178	

lbs.
1.4

5
5
Wiha Insulated Adjustable Wrenches
1000Volt
1000Volt
WH201 Inch Open-End Wrenches, With Insulated Handle

Insulation According to VDE Specification 0680 and EN/IEC 60900,
DIN 7446 and CSA, up to 1000 Volt. Individually Tested.
Chrome-vanadium steel, hardened. Angled 15O.
Item		
OAL	 OAL	
No.	
Inch	
mm	 Inch	
lbs.	
pkg.	
	WH20131
1/4	
87.5	 3.4	
.04	
1
	WH20133
5/16	
100	 3.9	
.05	
1	
	WH20135
3/8	
105	 4.1	
.09	
1	
	WH20136
7/16	
117	 4.6	
.09	
1	
	WH20137
1/2	
140	 5.5	
.15	
1	
	WH20138
9/16	
146	 5.7	
.15	
1	
	WH20140
5/8	
158	 6.2	
.20	
1	
	WH20141
11/16	
165	 6.5	
.23	
1	
	WH20142
3/4	
178	 7.0	
.33	
1	
	WH20144
13/16	
191	 7.5	
.42	
1	
	WH20145
7/8	
192	 7.6	
.44	
1	
	WH20146
15/16	
201	 7.9	
.51	
1	
	WH20147
1	
213	 8.4	
.61	
1	
	WH20148
1-1/16	
233	 9.2	
.79	
1	
	WH20149
1-1/8	
233	 9.2	
.77	
1	
* Lengths are +/- 5% due to coating process

1000Volt
WH200

Metric Open-End Wrenches, With Insulated Handle
Insulation According to VDE Specification 0680 and EN/IEC 60900,
DIN 7446 and CSA, up to 1000 Volt. Individually Tested.
Chrome-vanadium steel, hardened. Angled 15O.
Item		
OAL	 OAL	
No.	
mm	
mm	
Inch	
lbs.	
pkg.	
WH20006
	
6.0	
97	
3.8	
.04	
1	
WH20007
	
7.0	
98	
3.9	
.05	
1	
WH20008
	
8.0	
104	
4.1	
.07	
1	
WH20009
	
9.0	
108	
4.3	
.07	
1	
WH20010
	
10.0	
107	
4.2	
.08	
1	
WH20011
	
11.0	
118	
4.6	
.11	
1	
WH20012
	
12.0	
129	
5.1	
.11	
1	
WH20013
	
13.0	
137	
5.4	
.19	
1	
WH20014
	
14.0	
150	
5.9	
.19	
1	
WH20015
	
15.0	
151	
5.9	
.17	
1	
WH20016
	
16.0	
164	
6.5	
.22	
1	
WH20017
	
17.0	
162	
6.4	
.24	
1	
WH20018
	
18.0	
173	
6.8	
.41	
1	
WH20019
	
19.0	
178	
7.0	
.32	
1	
WH20020
	
20.0	
190	
6.9	
.36	
1
WH20022
	
22.0	
196	
7.7	
.39	
1	
WH20024
	
24.0	
211	
8.3	
.58	
1	
WH20027
	
27.0	
218	
8.6	
.68	
1	
WH20030
	
30.0	
235	
9.3	
.97	
1	
WH20032
	
32.0	
237	
9.3	
1.01	 1	

WH76208 Insulated 8” Adjustable Wrench

Insulation According to ASTM, EN/IEC, NFPA, CSA and ISO
Specification, up to 1000 Volt. Individually Tested. Etched on scale
for pre-setting size. Slip guard handle for added protection.
Item	
OAL	
OAL	 Capacity	
No.	
Inch	
mm	
Opening	
lbs.	
pkg.	
WH76208
	
8.0	
200	
1”	
.7	
1	

1000Volt
WH76210 Insulated 10” Adjustable Wrench

Insulation According to ASTM, EN/IEC, NFPA, CSA and ISO
Specification, up to 1000 Volt. Individually Tested. Etched on scale
for pre-setting size. Slip guard handle for added protection.
Item	
OAL	
OAL	 Capacity	
No.	
Inch	
mm	
Opening	
lbs.	
pkg.	
WH76210
	
10.0	
250	
1-1/4”	
1.4	
1	

1000Volt
WH76212 Insulated 12” Adjustable Wrench

Insulation According to ASTM, EN/IEC, NFPA, CSA and ISO
Specification, up to 1000 Volt. Individually Tested. Etched on scale
for pre-setting size. Slip guard handle for added protection.
Item	
OAL	
OAL	 Capacity	
No.	
Inch	
mm	
Opening	
lbs.	 pkg.	
WH76212
	
12.0	
300	
1-1/2”	
1.9	
1	

1000Volt
WH76215 Insulated 15” Adjustable Wrench

Insulation According to ASTM, EN/IEC, NFPA, CSA and ISO
Specification, up to 1000 Volt. Individually Tested. Etched on scale
for pre-setting size. Slip guard handle for added protection.
Item	
OAL	
OAL	 Capacity	
No.	
Inch	
mm	 Opening	
lbs.	
pkg.	
WH76215
	
15.0	
380	
1-11/16”	
2.8	
1	

1000Volt
WH76290

3 Pc. Insulated Adjustable Wrenches Etched on scale for
pre-setting size. Slip guard handle for added protection.
Item No. WH76290
		
Set includes the following:		
lbs. 4.0		 8.0”, 10.0”, 12.0” Adjustable Pliers		

6
Wiha Insulated Ratchet Wrenches
Insulation Test Standards:
Insulation according to ASTM F-1505-01,
EN/IEC 60900, ISO 3110 and CSA
Specification
Each tool individually
tested to 10,000 volts
and certified to 1000
Volt ac or 1500 Volt dc

Steel
Forged from chrome
vanadium, meets - DIN 3110

1000V

1000Volt

1000Volt
WH213 Inch Insulated Ratchet Wrenches, With Insulated Handle

WH212 Metric Insulated Ratchet Wrenches, With Insulated Handle

Insulation According to EN/IEC 60900, ISO 3110 Specification,
Up To 1000 Volt. Individually Tested.
Blade chrome-vanadium steel, hardened.
Item		
OAL	 OAL	
No.	
Inch	 mm	 Inch		
lbs.	 pkg.	
WH21325
	
3/8	
140	 5.5		
.14	 1	
WH21327
	
7/16	 143	 5.6		
.15	 1	
WH21329
	
1/2	
154	 6.1		
.18	 1	
WH21331
	
9/16	 162	 6.4		
.22	 1	
WH21333
	
5/8	
177	 7.0		
.30	 1	
WH21335
	
3/4	
209	 8.2		
.46	 1	

Insulation According to EN/IEC 60900, ISO 3110 Specification,
Up To 1000 Volt. Individually Tested.
Blade chrome-vanadium steel, hardened.
Item		
OAL	 OAL	
No.	
mm	 mm	 Inch		
lbs.	 pkg.	
WH21208
	
8.0	
125	 4.9		
.08	 1	
WH21210
	
10.0	 140	 5.5		
.12	 1	
WH21212
	
12.0	 150	 5.9		
.18	 1	
WH21213
	
13.0	 152	 6.0		
.18	 1	
WH21214
	
14.0	 163	 6.4		
.22	 1	
WH21217
	
17.0	 193	 7.6		
.38	 1	
WH21219
	
19.0	 210	 8.3		
.45	 1	

1000Volt

1000Volt
WH21391 6 Piece Inch Insulated Ratchet Wrenches Set

Item			
No.		
Inch	
WH21391
WH 21325	 3/8	
	
WH 21327	 7/16	
	
WH 21329	 1/2	
	

OAL				
Inch			
Inch	
WH 21331	 9/16	
5.5	
WH 21333 	 5/8	
5.6	
WH 21335	 3/4	
6.1	

OAL
Inch	
6.4	
7.0	
8.2	

lbs.
1.95

WH21290 7 Piece Metric Insulated Ratchet Wrenches Set
Item			
OAL				
OAL
No.		
mm	 mm			
mm	 mm	
WH21290
WH 21208	 8.0	
	
4.9	
WH 21214 	 14.0	 6.4	
WH 21210	 10.0	 5.5	
WH 21217	 17.0	 7.6	
	
WH 21212	 12.0	 5.9	
WH 21219	 19.0	 8.3	
	
WH 21213	 13.0	 6.0					
	

lbs.
2.10

7
7

Wiha Insulated Deep Offset Ring Wrenches
Insulation Test Standards:
Insulation according to ASTM F-1505-01,
EN/IEC 60900, ISO 3110 and CSA
Specification
Each tool individually
tested to 10,000 volts
and certified to 1000
Volt ac or 1500 Volt dc

EWW
iha
N
From

Steel
Forged from chrome
vanadium, meets - DIN 3110

1000V

1000Volt
WH210 Insulated Metric Offset Ring Wrenches, Insulation According

to EN/IEC 60900, ISO 3110 Specification, Up To 1000 Volt.
Individually Tested. Blade Chrome-Vanadium steel, hardened.
Item		
OAL	 OAL	
No.	
mm	 mm	
Inch		 lbs.	
pkg.	
	
8.0	
159	
6.3		 .16	
1	
WH21008
	
9.0	
159	
6.3		 .18	
1	
WH21009
	
10.0	 171	
6.8		 .20	
1	
WH21010
	
11.0	 178	
7.0		 .22	
1	
WH21011
	
12.0	 191	
7.5		 .30	
1	
WH21012
	
13.0	 194	
7.6		 .30	
1	
WH21013
	
14.0	 203	
8.0		 .34	
1
WH21014
	
15.0	 203	
8.0		 .34	
1
WH21015
	
17.0	 219	
8.6		 .44	
1
WH21017
	
19.0	 241	
9.5		 .52	
1
WH21019
	
22.0	 257	
10.1		 .64	
1
WH21022
	
24.0	 279	
11.0		 .90	
1
WH21024
	
27.0	 286	
11.3		 .96	
1
WH21027
	
30.0	 311	
12.3		 1.28	 1
WH21030
	
32.0	 318	
12.5		 1.38	 1
WH21032

WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature
is between -20 to +70O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.

1000Volt
WH21093 15 Piece Metric Insulated Offset Ring Wrenches Set

Item No.			
	WH21093
Metric:
	
8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 17.0,
lbs. 8.70	
19.0, 22.0, 24.0, 27.0, 30.0, 32.0mm

WH21095 8 Piece Metric Insulated Offset Ring Wrenches Set

Item No.	
	WH21095
	

Metric:		
10.0, 11.0, 12.0, 13.0, 14.0, 15.0,		
17.0, 19.0mm					

lbs.		
3.20

8
Wiha Insulated Deep Offset Ring Wrenches

Insulation Test Standards:
Insulation according to
ASTM, EN/IEC, VDE
& CSA Specification
Individually tested

iha
NEWW
From

Insulation
molded on for
permanent bonding

1000Volt
WH210 Insulated Inch Offset Ring Wrenches

Item		
OAL	
No.	
Inch	 mm	
WH21040
	
1/4	
159	
WH21042
	
5/16	 159	
WH21044
	
3/8	
171	
WH21046
	
7/16	 178	
WH21048
	
1/2	
191	
WH21050
	
9/16	 194	
WH21052
	
5/8	
203	
WH21054
	
11/16	 203	
WH21056
	
3/4	
219	
WH21058
	
13/16	 241	
WH21060
	
7/8	
257	
WH21062
	
15/16	 279	
WH21064
	
1.0	
286	
WH21066
	
1-1/16	 311	
WH21068
	
1-1/4	 318	

Wiha Insulated Electrician’s Knives

OAL	
Inch		
6.3		
6.3		
6.8		
7.0		
7.5		
7.6		
8.0		
8.0		
8.6		
9.5		
10.1		
11.0		
11.3		
12.3		
12.5		

lbs.	
.16	
.18	
.20	
.22	
.30	
.30	
.34	
.34	
.44	
.52	
.64	
.90	
.96	
1.28	
1.38	

pkg.	
1	
1	
1	
1	
1	
1	
1
1
1
1
1
1
1
1
1

1000V

Each tool individually tested to 10,000 volts &
rated to 1000 Volt ac or 1500 Volt dc

1000Volt
WH15000 Insulated Electrician’s Cable Stripping Knife, With

Insulated Handle, Insulation According To VDE Specification,
Up To 1000 Volt. Individually Tested.
Blade tool steel, hardened, molded directly on. Cover included.
Item	
Blade	 OAL	 OAL	
No.	
mm	 mm	 Inch		
lbs.	 pkg.	
WH15000
	
50	
216	 8.5		
.30	 1	

NEW

From

Wiha

1000Volt
WH15003 Insulated Electrician’s Cable Stripping Knife, With

1000Volt
WH21094 15 Piece Inch Insulated Offset Ring Wrenches Set
Item No.			
WH21094
	
Inch:
	
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,
lbs. 8.70	
13/16, 7/8, 15/16, 1, 1-1/16, 1-1/4”

NEW

From

Insulated Handle, Insulation According To VDE Specification,
Up To 1000 Volt. Individually Tested. Straight, partly insulated,
strong blade. Insulation molded directly on. Cover included.
Item	
Blade	 OAL	 OAL	
No.	
mm	 mm	 Inch		
lbs.	 pkg.	
WH15003
	
50	
230	 9.0		
.23	 1	

1000Volt

Wiha

WH15050 Insulated Stripping Knife, With Insulated Handle

WH21096 8 Piece Inch Insulated Offset Ring Wrenches Set

Item No.	
WH21096
	
	

Inch:		
5/16, 3/8, 7/16, 1/2, 9/16,				
5/8, 11/16, 3/4”					

lbs.		
3.20

Insulation According To VDE Specification, Up To 1000 Volt.
Individually Tested. Blade tool steel, hardened. Insulation molded
directly on. Hooked cutting edge, half-round ground. Cover included.
Item	
Blade	 OAL	 OAL	
No.	
mm	 mm	 Inch		
lbs.	 pkg.	
WH15050
	
35	
222	 8.75		
.22	 1	

9
9

Wiha Insulated Hex L-keys
Insulation Test Standards:
Insulation according to ASTM,
F-1505-01, EN/IEC 60900
and CSA

Insulation
Applied directly
onto blade for
permanent
bonding

1000V
Each tool individually
tested to 10,000 volts
and certified to 1000
Volt ac or 1500 Volt dc

1000Volt
WH136 Inch Insulated Hex L-keys, With Insulated Handle

Insulation According to IEC 60900 Specification, Up To 1000 Volt.
Individually Tested. Blade chrome-vanadium steel, hardened.
Item		
OAL	 OAL	
No.	
Inch	
mm	 Inch		 lbs.	
pkg.	
WH13670
	
1/16	
79	
3.1		 .05	
1	
WH13671
	
5/64	
84	
3.3		 .05	
1	
WH13672
	
3/32	
89	
3.5		 .05	
1
WH13673
	
7/64	
94	
3.7		 .06	
1
WH13663
	
1/8	
104	 4.1		 .06	
1	
WH13665
	
5/32	
104	 4.1		 .06	
1	
WH13666
	
3/16	
134	 5.3		 .10	
1	
WH13667
	
7/32	
134	 5.3		 .12	
1	
WH13668
	
1/4	
134	 5.3		 .16	
1	
WH13669
	
5/16	
144	 5.7		 .24	
1	
WH13662
	
3/8	
234	 9.2		 .51	
1	
WH13664
	
1/2	
234	 9.2		 .77	
1	

1000Volt
WH136 Metric Insulated Hex L-keys, With Insulated Handle
Insulation According to IEC 60900 Specification, Up To 1000 Volt.
Individually Tested. Blade chrome-vanadium steel, hardened.
Item		
OAL	 OAL	
No.	
mm	
mm	
Inch		
lbs.	
pkg.	
WH13650
	
1.5	
100	
3.9		
.09	
1
WH13651
	
2.0	
105	
4.1		
.09	
1
WH13652
	
2.5	
115	
4.5		
.09	
1
WH13653
	
3	
130	
5.1		
.10	
1	
WH13654
	
4	
120	
4.7		
.10	
1	
WH13655
	
5	
140	
5.5		
.10	
1	
WH13656
	
6	
140	
5.5		
.13	
1	
WH13658
	
8	
150	
5.9		
.24	
1	
WH13659
	
10	
220	
8.7		
.51	
1	
WH13657
	
12	
260	
10.2		
.77	
1	

WH13691

1000Volt

WH13690

WH13690 8 Piece Insulated Inch Hex L-key Set
Item			
OAL				
No.		
Inch	 Inch			
Inch	
WH 13668	 1/4	
	WH13690
WH13663	 1/8	 4.1	
WH 13669	 5/16	
	
WH13665	 5/32	 4.1	
WH 13662	 3/8	
	
WH13666	 3/16	 5.3	
WH 13664	 1/2	
	
WH13667	 7/32	 5.3	

OAL
Inch	
5.3	
5.7	
9.2	
9.2	

lbs.
2.17

WH13691 7 Piece Insulated Metric Hex L-key Set
1000Volt
Item			
OAL				
OAL
No.		
mm	 mm			
mm	 mm	
lbs.
WH13658	 8.0	 150	
	WH13691
2.07
WH13653	 3.0	 130	
WH13659	 10.0	 220	
	
WH13654	 4.0	 120	
WH13657	 12.0	 260	
	
WH13655	 5.0	 140	
	
WH13656	 6.0	 140					

EWW
iha
N
From

1000Volt
WH13693 10 Piece Insulated Metric Hex L-key Set

Item			
No.		
mm	
WH13693
WH 13650	 1.5	
	
WH 13651	 2.0	
	
WH 13652	 2.5	
	
WH 13653	 3.0	
	
WH 13654	 4.0	
	

OAL				
mm			
mm	
100	
WH13655	 5.0	
105	
WH13656	 6.0	
115	
WH13658	 8.0	
130	
WH13659	 10.0	
120	
WH13657	 12.0	

1000Volt
OAL
mm	
140	
140
150
220	
260

lbs.
2.26

10
Wiha Insulated Hex Bit Sockets

Wiha Insulated 1/4” Sockets & Sets
Inch 6 Point

1000Volt
WH318 Insulated 3/8” Drive Sockets - Insulation according to

EN/IEC 60900, DIN 7448 Specification, Up To 1000 Volt.
Individually Tested. Chrome-vanadium steel, forged, oil-hardened.
Item		
OAL			
No.	
Inch	
Inch	
lbs.	
pkg.	
WH31805
	
3/16	
3.1”	
.13	
1	
WH31807
	
7/32	
3.1”	
.14	
1	
WH31809
	
1/4	
3.1”	
.14	
1	
WH31811
	
5/16	
3.1”	
.16	
1	
WH31813
	
3/8	
3.1”	
.18	
1	
WH31815
	
7/16	
3.1”	
.20	
1	
WH31817
	
1/2	
3.1”	
.22	
1	
*Sockets must be used with insulated ratchets & extensions

1000Volt

1000Volt
WH313 Insulated 1/4” Drive Sockets - 6 Point, Insulation According

To ASTM F-1505-01, DIN 7448 & CSA Specification, Up To 1000
Volt. Individually Tested. Chrome-vanadium steel, forged, oil-hardened.
Item			
No.	
Inch		
lbs.	 pkg.	
WH31336
	
3/16		
.03	 1	
WH31337
	
7/32		
.03	 1	
WH31338
	
1/4		
.03	 1	
WH31339
	
9/32		
.04	 1	
WH31340
	
5/16		
.04	 1	
WH31341
	
11/32		
.05	 1	
WH31342
	
3/8		
.05	 1	
WH31343
	
7/16		
.06	 1	
WH31344
	
1/2		
.07	 1	
WH31345
	
9/16		
.07	 1
*Sockets must be used with insulated ratchets & extensions

Metric 6 Point
WH31890

7 Pc. Insulated 3/8” Drive Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. WH31890
		
Set includes the following:		
lbs. 1.7		 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2”		

WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature
is between -20 to +70O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.

1000Volt
WH313 Insulated 1/4” Drive Sockets - 6 Point, Insulation According
To ASTM F-1505-01, DIN 7448 & CSA Specification, Up To 1000 Volt.
Individually Tested. Chrome-vanadium steel, forged, oil-hardened.
Item		
No.	
mm		
lbs.	 pkg.	
	WH31326
5.0		
.03	 1	
	WH31327
6.0		
.03	 1	
	WH31328
7.0		
.03	 1	
	WH31329
8.0		
.04	 1	
	WH31330
9.0		
.04	 1	
	WH31331
10.0		
.05	 1	
WH31332
	
11.0		
.05	 1	
	WH31333
12.0		
.06	 1	
	WH31334
13.0		
.06	 1	
	WH31335
14.0		
.07	 1	
*Sockets must be used with insulated ratchets & extensions

1000Volt
WH12851 Insulated 1/4” Drive Ratchet, EN/IEC 60900 & CSA

Chrome-Vanadium steel.
Item		
OAL	
No.	
Inch	 mm	
WH12851
	
1/4”	 140	

Reversible.
OAL	
Inch		
5.5		

lbs.	
.28	

pkg.	
1	

11
11
Wiha Insulated 1/4” Sockets & Sets

1000Volt

WH31390

13 Piece Insulated 1/4” Drive Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated after EN/IEC 60900.
Item No. WH31390
		
Set includes the following:
		
	 3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
lbs.			 3/8, 7/16, 1/2, 9/16”
1.39			 1/4” x 50mm Extension Bar
			 1/4” x 100mm Extension Bar
			 1/4” Ratchet - 140mm

1000Volt
WH31395

11 Piece Insulated 1/4” T-handle & Socket Set - Metric
CV steel, forged, oil-hardened sockets. Insulated after EN/IEC 60900.
Item No. WH31395
		
Set includes the following:
		
	 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
lbs. 1.40	 		 Insulated 1/4” T-handle

Each tool individually tested to 10,000 volts &
certified to 1000 Volt ac or 1500 Volt dc

1000Volt

Wiha Insulated 1/4” Socket accessories
WH31391

13 Piece Insulated 1/4” Drive Socket Set - Metric
CV steel, forged, oil-hardened sockets. Insulated after EN/IEC 60900.
Item No. WH31391
		
Set includes the following:
		
	 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
lbs. 			 1/4” x 50mm Extension Bar
1.41			 1/4” x 100mm Extension Bar
			 1/4” Ratchet - 140mm

1000Volt
WH29006 Insulated 1/4” Drive T-handle, With Insulated Handle

Insulation according to EN/IEC 60900 & CSA specification, up to
1000 Volt. Individually Tested. Blade CV steel, hardened.
Item		
OAL	 OAL	
No.	
Inch	 mm	 Inch		
lbs.	 pkg.	
WH29006
	
1/4	
160	 6.2”		
.57	 1	

1000Volt
WH31394

11 Piece Insulated 1/4” T-handle & Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated after EN/IEC 60900.
Item No. WH31394
		
Set includes the following:
		
	 3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
lbs.			 3/8, 7/16, 1/2, 9/16”
1.40	
		 Insulated 1/4” T-handle

1000Volt
WH128 Insulated 1/4” Extension Bars, ASTM F-1505-01,
EN/IEC 60900 & CSA Chrome-Vanadium steel.
Item	
OAL OAL	
No.	
Inch	 mm	 Inch		
lbs.	 pkg.	
WH12854
	
1/4”	 50	
2.0		
.08	 1	
WH12855
	
1/4”	 100	 3.9		
.12	 1	

12
Wiha Insulated 3/8” Sockets & Sets

Wiha Insulated 3/8” Sockets & Sets

1000Volt
WH314

Insulated 3/8” Drive Sockets - Insulation according to
EN/IEC 60900, DIN 7448 & CSA specification, up to 1000 Volt.
Individually Tested. CV steel, forged, oil-hardened.
Item			
No.	
Inch	
lbs.	 pkg.	
WH31425
	
1/4	
.07	 1	
WH31428
	
9/32	
.07	 1	
WH31429
	
5/16	
.07	 1	
WH31430
	
11/32	
.07	 1	
WH31431
	
3/8	
.08	 1	
WH31432
	
7/16	
.08	 1	
WH31433
	
1/2	
.10	 1	
WH31434
	
9/16	
.10	 1	
WH31435
	
5/8	
.10	 1	
WH31436
	
11/16	
.13	 1	
WH31437
	
3/4	
.14	 1	
WH31438
	
13/16	
.17	 1	
WH31439
	
7/8	
.18	 1	
*Sockets must be used with insulated ratchets & extensions

1000Volt

10 Piece Insulated 3/8” Drive Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. WH31493
		
Set includes the following:
		
	 5/16, 3/8, 7/16, 1/2,
lbs. 			 9/16, 5/8, 11/16, 3/4”
2.50			 3/8” x 125mm Extension Bar
			 3/8” Ratchet - 280mm

WH31493

1000Volt
1000Volt
WH315 Insulated 3/8” Drive Sockets - Insulation according to VDE,

EN/IEC 60900, DIN 7448 & CSA specification, up to 1000 Volt.
Individually Tested. Chrome-vanadium steel, forged, oil-hardened.
Item			
No.	
mm	
lbs.	 pkg.	
WH31506
	
6.0	
.07	 1	
WH31507
	
7.0	
.07	 1	
WH31508
	
8.0	
.07	 1	
WH31509
	
9.0	
.07	 1	
WH31510
	
10.0	
.07	 1	
WH31511
	
11.0	
.08	 1	
WH31512
	
12.0	
.10	 1	
WH31513
	
13.0	
.10	 1	
WH31514
	
14.0	
.10	 1	
WH31515
	
15.0	
.10	 1	
WH31516
	
16.0	
.10	 1	
WH31517
	
17.0	
.11	 1	
WH31518
	
18.0	
.12	 1	
WH31519
	
19.0	
.14	 1	
WH31520
	
20.0	
.15	 1	
WH31521
	
21.0	
.17	 1	
WH31522
	
22.0	
.18	 1	
WH31524
	
24.0	
.26	 1	
*Sockets must be used with insulated ratchets & extensions

WH31590

10 Piece Insulated 3/8” Drive Socket Set - Metric
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. WH31590
		
Set includes the following:
		
	 8, 10, 11, 12, 13, 14, 17, 19mm
lbs.			 3/8” x 125mm Extension Bar
2.50			 3/8” Ratchet - 280mm

1000Volt

16 Piece Insulated 3/8” Drive Socket Set - Inch/Metric
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. 		WH31491 Set includes the following:
		
	 5/16, 3/8, 7/16, 1/2,
lbs.			 9/16, 5/8, 11/16, 3/4”
2.01			 8, 10, 11, 12, 13, 14, 17, 19mm

WH31491

13
13
Wiha Insulated 3/8” Sockets & Sets

1000Volt

10 Piece Insulated 3/8” T-handle & Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated after EN/IEC 60900.
Item No. WH31496
		
Set includes the following:
		
	 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”
lbs.	
		 3/8” x 125mm Extension Bar
2.47			 Insulated 3/8” T-handle

WH31496

1000Volt
WH31495

24 Piece Insulated 3/8” Drive Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. WH31495
		
Set includes the following:
		
	 1/4, 9/32, 5/16, 11/32, 3/8, 7/16
			 1/2, 9/16, 5/8,11/16, 3/4” Sockets
lbs.	
3/8” x 125mm Extension Bar
9.07	
3/8” x 250mm Extension Bar
	
3/8” Ratchet - 190mm
	
Insulated Electrician’s Knife - 50mm
	
Slotted: 3.5, 4.5, 6.5mm
	
Phillips: 1, 2, 3
	
6.3” Long Nose Pliers
	
8.0” Combo Pliers
	
6.3” Diagonal Cutters
*Sockets must be used with insulated ratchets & extensions

WH31595

10 Piece Insulated 3/8” T-handle & Socket Set - Metric
CV steel, forged, oil-hardened sockets. Insulated after EN/IEC 60900.
Item No. WH31595
		
Set includes the following:
		
	 8, 10, 11, 12, 13, 14, 17, 19mm
lbs.	
		 3/8” x 125mm Extension Bar
2.47			 Insulated 3/8” T-handle

Wiha Insulated 3/8” Socket accessories

1000Volt
WH12852 Insulated 3/8” Drive Ratchet, EN/IEC 60900

Chrome-Vanadium steel. Reversible.
Item		
OAL	 OAL	
No.	
Inch	 mm	 Inch		
WH12852
	
3/8”	 190	 7.5		

lbs.	
.93	

pkg.	
1	

1000Volt
1000Volt
24 Piece Insulated 3/8” Drive Socket Set - Metric
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. WH31592
		
Set includes the following:
		
	 6, 7, 8, 9, 10, 11, 12,
			 13, 14, 17, 19mm Sockets
lbs.	
3/8” x 125mm Extension Bar
9.08	
3/8” x 250mm Extension Bar
	
3/8” Ratchet - 190mm
	
Insulated Electrician’s Knife - 50mm
	
Slotted: 3.5, 4.5, 6.5mm
	
Phillips: 1, 2, 3
	
6.3” Long Nose Pliers
	
8.0” Combo Pliers
	
6.3” Diagonal Cutters
*Sockets must be used with insulated ratchets & extensions

WH31592

WH128 Insulated 3/8” Extension Bars, EN/IEC 60900

Chrome-Vanadium steel.
Item	
OAL
No.	
Inch	 mm	
WH12856
	
3/8”	 125	
WH12857
	
3/8”	 250	

OAL	
Inch		
4.9		
9.8		

lbs.	
.41	
.57	

pkg.	
1	
1	

1000Volt

WH29009 Insulated 3/8” Drive T-handle

Insulation according to EN/IEC 60900 specification, up to 1000 Volt
Rated. Individually Tested. Blade chrome-vanadium steel, hardened.
Item		
OAL	 OAL	
No.	
Inch	 mm	 Inch		
lbs.	 pkg.	
	
3/8	
200	 7.9”		
.55	 1	
WH29009

14
Wiha Insulated 1/2” Sockets & Sets

Wiha Insulated 1/2” Sockets & Sets

1000Volt
WH317 Insulated 1/2” Drive Sockets - Insulation According to

ASTM F-1505-01, DIN 7448 & CSA Specification, Up To 1000 Volt.
Individually Tested. CV steel, forged, oil-hardened.
Item			
No.	
Inch	
lbs.	 pkg.	
WH31703
	
5/16	
.16	
1	
WH31704
	
11/32	
.16	
1	
WH31705
	
3/8	
.16	
1	
WH31707
	
7/16	
.16	
1	
WH31708
	
1/2	
.16	
1	
WH31809
	
9/16	
.17	
1	
WH31710
	
5/8	
.19	
1	
WH31712
	
11/16	
.19	
1	
WH31713
	
3/4	
.21	
1	
WH31714
	
13/16	
.23	
1	
WH31715
	
7/8	
.27	
1	
WH31716
	
15/16	
.35	
1	
WH31718
	
1	
.33	
1	
WH31720
	
1-1/8	
.44	
1	
WH31722
	
1-1/4	
.58	
1	
*Sockets must be used with insulated ratchets & extensions

1000Volt
WH31790

24 Piece Insulated 1/2” Drive Socket Set - Inch
CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Item No. 	 Set includes the following:
WH31790
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1” Sockets
	
	
1/2” x 125mm Extension Bar
lbs.	
1/2” x 250mm Extension Bar
11.41	
1/2” Ratchet - 260mm
	
Insulated Electrician’s Knife - 50mm
	
Slotted: 3.5, 4.5, 6.5mm & Phillips: 1, 2, 3
	
6.3” Long Nose Pliers
	
8.0” Combo Pliers
	
6.3” Diagonal Cutters

Each tool individually tested to 10,000 volts &
certified to 1000 Volt ac or 1500 Volt dc

Individually Tested

1000Volt
WH316 Insulated 1/2” Drive Sockets - Insulation According to VDE,

DIN 7448 & CSA Specification, Up To 1000 Volt.
Item			
No.	
mm	
lbs.	 pkg.	
WH31608
	
8.0	
.15	 1	
WH31609
	
9.0	
.15	 1	
WH31610
	
10.0	
.16	 1	
WH31611
	
11.0	
.16	 1	
WH31612
	
12.0	
.16	 1	
WH31613
	
13.0	
.17	 1	
WH31614
	
14.0	
.17	 1	
WH31615
	
15.0	
.17	 1	
WH31616
	
16.0	
.19	 1	
WH31617
	
17.0	
.19	 1	
WH31618
	
18.0	
.20	 1	
WH31619
	
19.0	
.21	 1	
WH31620
	
20.0	
.25	 1	
WH31621
	
21.0	
.25	 1	
WH31622
	
22.0	
.28	 1	
WH31623
	
23.0	
.29	 1	
WH31624
	
24.0	
.30	 1	
WH31626
	
26.0	
.37	 1	
WH31627
	
27.0	
.41	 1	
WH31628
	
28.0	
.44	 1	
WH31630
	
30.0	
.51	 1	
WH31632
	
32.0	
.55	 1
*Sockets must be used with insulated ratchets & extensions

1000Volt

Metric

WH31691 24 Piece Insulated 1/2” Drive Socket Set - Metric

CV steel,
Item No.
	
WH31691
	
lbs.	
11.39	
	
	
	
	
	

forged, oil-hardened sockets. Insulated to EN/IEC 60900.
Set includes the following:
8, 9, 10, 12, 13, 14, 15, 17, 19, 22, 24mm Sockets
1/2” x 125mm Extension Bar
1/2” x 250mm Extension Bar
1/2” Ratchet - 260mm
Insulated Electrician’s Knife - 50mm
Slotted: 3.5, 4.5, 6.5mm & Phillips: 1, 2, 3
6.3” Long Nose Pliers
8.0” Combo Pliers
6.3” Diagonal Cutters

1000Volt
WH12326 Insulated 1/2” Drive Breaker Bar, IEC/EN 60900 & CSA

Chrome-Vanadium steel.
Item		
OAL	
No.	
Inch	 mm	
WH12326
	
1/2”	 250	

OAL	
Inch		
9.8		

lbs.	
1.04	

pkg.	
1	

15
15
Wiha Insulated 1/2” Socket accessories

Wiha Insulated Cable Cutters
For cutting solid
aluminum & copper
conductors

1000Volt
WH12853 Insulated 1/2” Drive Ratchet, IEC/EN 60900 & CSA

Chrome-Vanadium steel.
Item		
OAL	
No.	
Inch	 mm	
WH12853
	
1/2”	 260	

Reversible.
OAL	
Inch		
10.2		

1000Volt
WH11950

lbs.	 pkg.	
1.55	 1	

1000Volt
Insulated 1/2” Extension Bars, EN/IEC 60900 & CSA
Chrome-vanadium steel.
Item		
OAL	 OAL	
No.	
Inch	 mm	 Inch		
lbs.	 pkg.	
WH12858
	
1/2”	 125	 4.9		
.45	 1	
WH12859
	
1/2”	 250	 9.8		
.91	 1	

Cable Cutter, With Insulated Handle
Insulation According to EN/IEC 60900, ASTM F-1505 & CSA
Specification, Up To 1000 Volt. Individually Tested.
Blade alloyed tool steel. Induction hardened.
Item	
OAL	 OAL	 Capacity
No.	
mm	 Inch	 mm	 Inch	
lbs.	
pkg.	
	
500	 19.6	 12	
1/2”	
3.0	
1	
WH11950

WH128

1000Volt

WH29012

Insulated 1/2” Drive T-handle, With Insulated Handle
Insulation according to EN/IEC 60900 & CSA Specification, Up To
1000 Volt. Individually Tested. Blade VC steel, hardened.
Item	
OAL OAL	
No.	
Inch	 mm	 Inch		
lbs.	 pkg.	
WH29012
	
1/2	
200	 7.9”		
.68	 1	

31.5”

1000Volt
WH40800

Large Capacity Cable Cutter, With Insulated Handle
Insulation According to EN/IEC 60900, ASTM F-1505 & CSA
Specification, Up to 1000 Volt. Individually Tested.
Easy cutting blades, dropped forged, oil hardened. Cuts cable
diameters up to 50mm. Not to be used on steel rods.
Item	
OAL	 OAL	 Capacity
No.	
mm	 Inch	 mm	 Inch	
lbs.	
pkg.	
WH40800
	
800	 31.5	 50	
2”	
8.0	
1	

For cutting
solid aluminum,
copper & medium
hard wires

Uses standard
12” blade

1000Volt

1000Volt

WH29250 End Cutters, With Insulated Handle. Insulation According

WH19767 Hacksaw, With Insulated Handle

Insulation According to EN/IEC 60900,
& CSA Specification, Up To 1000 Volt.
Item	
OAL	
OAL	
No.	
mm	
Inch		 lbs.	
WH19767
	
457mm	 18.0”		 1.92	

For cutting multi strand aluminum & copper cables

DIN ISO 8976, ASTM F-1505
Individually Tested.
pkg.	
1	

to EN/IEC 60900, DIN ISO 8976, ASTM F-1505 & CSA Specification.
Individually Tested. Blade alloyed tool steel. Induction hardened.
Item	
OAL	 OAL	 Capacity
No.	
mm	 Inch	 mm		
lbs.	 pkg.	
WH29250
	
250	 10	
7/8”		
1.1	 1	

EWW
N
iha
From

1000Volt
Waterpump Pliers, With Insulated Handle
Insulation According to EN/IEC 60900, DIN ISO 8976, ASTM F-1505
& CSA Specification, Up To 1000 Volt. Individually Tested.
Box joint. Chrome-vanadium steel, drop forged, oil hardened.
Item	
OAL	 OAL	 Capacity
No.	
mm	 Inch	 mm		
lbs.	 pkg.	
	
240	 9.5	 7/8”		
1.1	 1	
WH29240
WH29240

1000Volt
Waterpump Pliers, With Insulated Handle
Insulation According to EN/IEC 60900, DIN ISO 8976, ASTM F-1505
& CSA Specification, Up To 1000 Volt. Individually Tested.
Chrome-vanadium steel, drop forged, oil hardened.
Item	
OAL	 OAL	
No.	
mm	 Inch		
lbs.	 pkg.	
	
250	 10.0”		
1.2	 1
WH11625
	
300	 12.0”		
1.8	 1
WH11630
WH116

16
Wiha Insulated Serrated Tweezers
Meets EN/IEC Insulation Standards

Two layer high contrast
insulated coatings

Slip guards at tips
for user safety

Carbon steel with
chrome nickel plated

1000V

10,000Volts tested 1000Volts rated

NEW

From

Wiha

EWW
N
iha
From

1000Volt
WH75205 Insulated Serrated Straight Fine Tip Tweezers,

1000Volt

IEC/EN 60900 & CSA Standards, 10,000 Volt Tested
Item		
OAL	 OAL	
No.		
mm	 Inch		
lbs.	 pkg.	
WH75205
		
130	 5.0		
.06	 1	

WH75302 Insulated Serrated Angled Fine Tip Tweezers,

IEC/EN 60900 & CSA Standards, 10,000 Volt Tested
Item		
OAL	 OAL	
No.		
mm	 Inch		
lbs.	 pkg.	
WH75302
		
145	 6.0		
.08	 1	

EWW
N
iha
From

NEW

From

Wiha

1000Volt
WH75210 Insulated Serrated Straight Blunt Tip Tweezers,

1000Volt

IEC/EN 60900 & CSA Standards, 10,000 Volt Tested
Item		
OAL	 OAL	
No.		
mm	 Inch		
lbs.	 pkg.	
WH75210
		
130	 5.0		
.08	 1	

WH75304 Insulated Serrated Angled Blunt Tip Tweezers,

NEW

From

IEC/EN 60900 & CSA Standards, 10,000 Volt Tested
Item		
OAL	 OAL	
No.		
mm	 Inch		
lbs.	 pkg.	
WH75304
		
200	 8.0		
.16	 1	

Wiha

1000Volt
WH75215 Insulated Serrated Straight Blunt Tip Tweezers,

IEC/EN 60900 & CSA Standards, 10,000 Volt Tested
Item		
OAL	 OAL	
No.		
mm	 Inch		
lbs.	 pkg.	
WH75215
		
145	 6.0		
.10	 1	

EWW
N
iha
From
1000Volt
WH75220 Insulated Serrated Straight Blunt Tip Tweezers,

IEC/EN 60900 & CSA Standards, 10,000 Volt Tested
Item		
OAL	 OAL	
No.		
mm	 Inch		
lbs.	 pkg.	
WH75220
		
200	 8.0		
.18	 1	

Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature
is between -20 to +70O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.
WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.

17
17

Wiha Insulated T-handles
Each tool individually
tested to 10,000 volts
and rated to 1000 Volt
ac or 1500 Volt dc

Insulation Test Standards:
Insulation according to EN/IEC 60900,
ASTM F-1505-01, VDE 0682/part 201,
DIN 7437, NFPA70E & CSA specification

Responds to OSHA’s use
specification 29 CFR1910
Insulation
Molded directly onto blade
for permanent bonding
Blade
CVM tool steel, hardened
to average 58/60RC

1000V

1000Volt
WH334 Inch T-handle, With Wiha-Molded Handle. Insulation

According to ASTM F-1505-01, New VDE Specification 0682/part 201
and EN/IEC 60900, NFPA70E & CSA, up to 1000Volt. Individually
Tested. Blade CVM steel, hardened. Insulation molded directly onto
blade. Wiha-SoftFinish® handle, multi-component.
Item
No.	
Inch	 Inch	 Inch	 mm	 lbs.	 pkg.	
WH33481
	
5/32	 5.9	 6.9	 176	 .09	 10	
WH33482
	
3/16	 5.9	 6.9	 176	 .15	 10	
WH33483
	
7/32	 5.9	 6.9	 176	 .19	 10	
WH33485
	
1/4	
5.9	 7.1	 176	 .20	 10	
WH33486
	
5/16	 5.9	 7.1	 176	 .26	 10	
WH33487
	
3/8	
5.9	 7.1	 176	 .44	 10	

1000Volt
WH33490 6 Piece Inch T-handle Hex Set

Item
No.		
WH33481
WH33490
		
WH33482
		
WH33483
		

Inch	
5/32	
3/16	
7/32	

mm		
WH33485
6.9		
WH33486
6.9		
WH33487
6.9		

Inch	
1/4	
5/16	
3/8	

mm	
7.1	
7.1	
7.1	

lbs.
1.66

mm	
7.1	
7.1	

.99 lbs.

1000Volt
WH334 Metric T-handle, With Wiha-Molded Handle. Insulation

According to ASTM F-1505-01, New VDE Specification 0682/part 201
and EN/IEC 60900, NFPA70E & CSA, up to 1000Volt. Individually
Tested. Blade CVM steel, hardened. Insulation molded directly onto
blade. Wiha-SoftFinish® handle, multi-component.
Item
No.	
mm	 mm	 Inch	 mm	 Inch	 lbs.	 pkg.	
WH33441
	
4.0	
150	 5.9	 176	 6.9	
.09	 10	
WH33443
	
5.0	
150	 5.9	 182	 7.1	
.15	 10	
WH33445
	
6.0	
150	 5.9	 182	 7.1	
.18	 10	
WH33447
	
8.0	
150	 5.9	 182	 7.1	
.26	 10	

1000Volt
WH33491 4 Piece Metric T-handle Hex Set

Item
No.		
mm	 mm		
mm	
WH33491
WH33441 4.0	 6.9		WH33445 6.0	
		
		 WH33443 5.0	 7.1		WH33447 8.0	

18
Wiha Multi-Bit Screwdrivers
Six Tools in One!

Wiha Insulated TorqueControl Tools
Includes Certificate

Insulated Bit Holder

1000Volt
Includes SlimLine blade holder
Insulated TorqueVario-S, With Window Scale Insulation
up to 1000 Volt. EN/IEC 60900 EN ISO 6798, BS EN 26789,
ASME B107.14M &CSA, +/- 6% Accuracy. Ergonomic multi-component
handle, light & compact. Handle sizes proportioned to optimize torque
range. Audible & perceptible click when torque setting has been attained.
WH287

Tested to
10,000 Volts

Insulation meets EN/IEC 60900

WH380 Sets Multi-Bit Screwdriver Sets with Wiha Powerhandle,

cellulose-acetate, impact resistant. Snap-lock rotatable cap.
Chambered bit holder equipped with transparent selector and 6 bits.
1/4” Bit holder, stainless steel. Shaft chrome-vanadium-molybdenum
steel, hardened, chrome-plated. Packaged in clear blister package.
Blade Length = 120mm (4.7”) Overall Length = 230mm (9”)
WH38006 Slotted/Phillips Multi-Bit Screwdriver
With Wiha Powerhandle and insulated shaft.
	
Set includes the following 1/4” bits:
	
Slotted Sizes: 5.5, 6.5mm		
lbs.	
	
Phillips Sizes: 0, 1, 2, 3		
.39	
WH38007 Slotted/Phillips/Square Multi-Bit Screwdriver

With Wiha Powerhandle and insulated shaft.
	
Set includes the following 1/4” bits:
	
Slotted Sizes: 6.5, 8.0mm 		
	
Phillips Sizes: 1, 2			
	
Square Sizes: 1, 2	

lbs.	
.41	

WH38025 Magnetic Bit Holder, 1/4” Wiha Powerhandle and insulated

shaft. Holder only can hold up to 6 bits.
	
lbs. .26

Item	
Range
No.	
Inch 	lbs.	 Increments	
mm	
lbs.	 pkg.	
WH28724
	
7.5 -	 20	
.5 Inch lbs	 126 - 131	
.43	 1	
WH28726
	
10 -	 50	
2 Inch lbs	 133 - 138	
.40	 1	
WH28727
	
20 -	 70	
2 Inch lbs	 137 - 142	
.69	 1	
WH287 Insulated TorqueVario-S Handle - In Newton Meter Scale
Item	
Range
No.	
Nm	
mm	
lbs.	
pkg.	
	
0.6 - 2.0	
131	
.45	
1	
WH28734
	
1.0 - 5.0	
138	
.45	
1	
WH28736
	
2.0 - 8.0	
142	
.72	
1	
WH28737
Each TorqueVario handle has unique serial number & certificate of calibration

1000Volt
WH28350 Insulated SlimLine Torque Blade Holder

Chrome-vanadium-molybdenum steel. Through hardened black finish.
ClicFix quick release holder securely locks bits.
Item		
OAL	 OAL	
No.	
mm	 mm	 Inch		
lbs.	 pkg.	
WH28350
	
6.0	
170	 6.7		
.02	 1		

Wiha Insulated TorqueControl & SlimLine Tool Sets
1000Volt

1000Volt

WH28791

8 Piece Insulated TorqueControl Set With Slotted &
Phillips SlimLine Blades Certified to EN ISO 6798, BS EN 26789,
ASME B107.14M. Set includes Insulated multi-component adjustable
TorqueVario-S handle, 5 SlimLine blades, SlimLine blade holder &
Torque adjustment tool.
Item No.								
			
lbs.
WH28791
	
SlimLine Slotted: 3.0, 4.0, 5.5mm			
.87
	
SlimLine Phillips: #1, #2				
	
WH 28726 - Handle Range 10-50 Inch/lbs.	
	
	
SlimLine Blade Holder	
With Certificate of Calibration

WH28792 16 Piece Insulated TorqueControl Set With SlimLine Blades
Certified to EN ISO 6798, BS EN 26789, ASME B107.14M. Set includes
Insulated multi-component adjustable TorqueVario-S handle,
13 SlimLine blades, SlimLine blade holder & Torque adjustment tool.
Item No.								
			
lbs.
	WH28792 SlimLine Slotted: 4.0, 5.5, 6.5mm			
1.27		
	
SlimLine Phillips: #1, 2
	
SlimLine Terminal Xeno: #1, 2	
	
SlimLine
: T8, T10, T15, T20
	
SlimLine Square: #1, 2			
	
WH 28727 - Handle Range 20-70 Inch/lbs.	
	
	
SlimLine Blade Holder	
With Certificate of Calibration

19
19
Wiha Insulated SlimLine Tools
Insulation Test Standards:
Insulation according to EN/IEC 60900,
ASTM F-1505-01, VDE 0682/part 201,
DIN 7437, NFPA70E & CSA specification

Wiha SlimTECHNOLOGY
Achieves blade
diameters up to 33%
narrower utilizing
integrated insulation
Ideal for jobs
where access
is limited
Integrated Slim
Insulation molded
directly onto blade

High quality chrome
vanadium steel,
through-hardened

Insulation does
not exceed screw
head diameter

1000Volt Rated
10,000Volt Tested

Wiha Insulated SlimLine Handle

Wiha Insulated SlimLine Blades
1.8”

1000Volt
WH28301 SlimLine Blade Holder, With Wiha-SoftFinish® Handle

Insulation According to VDE, ASTM F-1505-01 and EN/IEC 60900,
NFPA70E & CSA,
up to 1000 Volt.
Chrome-vanadium steel, through-hardened. Insulation molded
directly onto blade. Quick release holder securely lock blades.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item
No.	
Size	 mm	 Inch	 mm	 Inch	 lbs.	 pkg.	
WH28301
	
1/4”	 50	 2.0	 160	 6.3	 .15	 1	

WH283
Insulated Slotted SlimLine Blades
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Item					
Slim	 Working
No.	
mm	 Inch	 Inch	 mm	 Dia.	 Length	 lbs.	 Pkg.
WH28308
	
3.0	 .118	 1/8	 90	 4.1	 2.8”	
.02	 1	
WH28309
	
4.0	 .157	 5/32	 90	 4.1	 2.8”	
.02	 1	
WH28312
	
5.5	 .216	 7/32	 90	 6.1	 2.8”	
.02	 1	
WH28315
	
6.5	 .255	 1/4	 90	 6.1	 2.8”	
.02	 1	

1.8”

33%
narrower
insulation
diameter

WH283 Insulated Phillips SlimLine Blades
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Item			
Slim	 Working
No.	
Size	 mm	 Dia.	
Length	
lbs.	 Pkg.
WH28317
	
1	
90	
4.1	
2.8”	
.02	
1	
WH28319
	
2	
90	
6.1	
2.8”	
.02	
1		

Slim
Diameter

20
Wiha Insulated SlimLine Blades

Wiha Insulated SlimLine Blade Sets

1.8”

WH283 Insulated Xeno Slotted & Phillips SlimLine Blades
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Item			
Slim
Working
No.	
Size	 mm	 Dia.	
Length	
lbs.	 Pkg.
	
1	
90	 4.1	
2.8”	
.02	 1	
WH28327
	
2	
90	 6.1	
2.8”	
.02	 1		
WH28329

1.8”

1000Volt
WH28391 8 Piece Insulated SlimLine Blade Set

Insulated
SlimLine Blades
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Item			
Slim	
Working
No.	
Size	 mm	 Dia.	
Length	
lbs.	
Pkg.
WH28339
	
T8	
90	
4.1	
2.8”	
.02	
1	
WH28340
	
T10	 90	
4.1	
2.8”	
.02	
1	
WH28341
	
T15	 90	
6.1	
2.8”	
.02	
1
WH28342
	
T20	 90	
6.1	
2.8”	
.02	
1
WH283

High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Cushion grip handle with quick release holder to securely
lock blades. In roll up pouch
Item No.								
			
lbs.
	WH28391 Slotted: 4.0, 6.5 x 90mm 				
.45
	
Phillips: #1, #2 x 90mm
	
Xeno: #2 x 90mm
	
: T15, T20 x 90mm				
	
	
WH 28301 - SlimLine Cushion Grip Blade Holder			

1.8”

Insulated Square SlimLine Blades
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Item			
Slim	 Working
No.	
Size	 mm	 Dia.	
Length	
lbs.	 Pkg.
WH28346
	
1	
90	
4.1	
2.8”	
.02	 1	
WH28347
	
2	
90	
6.1	
2.8”	
.02	 1		

WH283

1000Volt
WH28390 15 Piece Insulated SlimLine Blade Set

High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Cushion grip handle with quick release holder to securely
lock blades. In roll up pouch
Item No.								
			
lbs.
	
Slotted: 3.0, 4.0, 5.5, 6.5 x 90mm 			
.56
WH28390
	
Phillips: #1, #2 x 90mm
	
Xeno: #1, #2 x 90mm
	
: T8, T10, T15, T20 x 90mm
	
Square: #1, #2 x 90mm			
	
	
WH 28301 - SlimLine Cushion Grip Blade Holder			

21
21
Wiha Insulated SlimLine Screwdrivers
Insulation Test Standards:
Insulation according to EN/IEC 60900,
ASTM F-1505-01, VDE 0682/part 201,
DIN 7437, NFPA70E & CSA specification

Wiha SlimTECHNOLOGY
Achieves blade
diameters up to 33%
narrower utilizing
integrated insulation

Integrated Slim
Insulation molded
directly onto blade

Ideal for jobs
where access
is limited

1000Volt Rated
10,000Volt Tested

1.4”
1.4”
Insulated Slotted SlimLine Screwdrivers
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.

WH320

Item				
No.	
mm	 Inch	 Inch	
	
3.5	 .139	 9/64	
WH32046
	
4.0	 .157	 5/32	
WH32049
	
4.5	 .177	 3/16	
WH32052
	
5.5	 .216	 7/32	
WH32055
	
6.5	 .255	 1/4	
WH32058

Slim					
Dia.	 mm	 mm	 lbs.	 Pkg.
3.5	 100	 204	 .07	 1
4.0	 100	 211	 .12	 1
4.5	 125	 211	 .14	 1
5.5	 125	 243	 .21	 1
6.5	 150	 268	 .25	 1

1.4”

Insulated Phillips SlimLine Screwdrivers
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item		
Slim		
No.	
Size	 Dia.	
mm	 mm	
lbs.	
Pkg.
WH32145
	
1	
4.5	
80	
204	
.12	
1	
WH32146
	
2	
6.0	
100	 211	
.21	
1	
WH321

Insulated Xeno SlimLine Screwdrivers For Terminal Screws
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item		
Slim		
No.	
Size	 Dia.	 mm	
mm	 lbs.	
Pkg.
WH30746
	
1	
4.5	
80	
191	 .12	
1	
WH30747
	
2	
6.0	
100	
218	 .21	
1		
WH307

1.4”

Insulated Square SlimLine Screwdrivers
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item		
Slim		
No.	
Size	 Dia.	 mm	 mm	 lbs.	 Pkg.
	
1	
4.0	 100	 218	 .12	 1	
WH35844
	
2	
4.5	 125	 243	 .19	 1		
WH35845
WH358

22
Wiha Insulated SlimLine Screwdriver Sets

1000Volt

WH32196

1000Volt
WH32198 11 Piece Insulated SlimLine Slotted, Phillips, Xeno & Square

Screwdrivers. Insulation According to ASTM F-1505-01, New VDE
Specification 0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to 1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item
No.		
Size	 mm		
mm	 mm	
lbs.
Slotted	 3.5	 100
								
1.75
WH32198
Phillips	
1	
80
Slotted	 4.0	 100
Phillips	
2	
100
Slotted	 4.5	 125
Slotted	 5.5	 125
Square	
1	
100
Slotted	 6.5	 150
Square	
2	
125
Pozidriv	
Pozidriv	

1	
2	

80
100	

1000Volt

6 Piece Insulated SlimLine Slotted, Phillips & Square
Screwdrivers. Insulation According to ASTM F-1505-01, New VDE
Specification 0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to 1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item
No.		
Size	 mm		
mm	 mm	
lbs.
WH32196
Slotted	 4.5	 125
								
1.02
Phillips	 1	
80
Slotted	 6.5	 150
Phillips	 2	
100
Square	
Square	

1	
2	

100
125	

1000Volt
WH32189

2 Piece Insulated SlimLine Slotted & Phillips Screwdrivers
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to 1000
Volt. Individually Tested to 10,000Volts. High quality CV steel,
through hardened. SlimLine blades have up to 33% narrower insulation
diameter then standard insulated tools.
Item
No.	
Size	 mm	
mm	 mm	
lbs.
WH32189
	
2	
100	
4.5	 125	
.37

WH32197

8 Piece Insulated SlimLine Slotted, Phillips & Square
Screwdrivers. Insulation According to ASTM F-1505-01, New VDE
Specification 0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to 1000 Volt. Individually Tested to 10,000Volts.
High quality CV steel, through hardened. SlimLine blades have up to
33% narrower insulation diameter then standard insulated tools.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item
No.		
Size	 mm		
mm	 mm	
lbs.
Slotted	 3.5 	 100
WH32197
	
							
1.18
Phillips	
1	
80
Slotted	 4.0	 100
Phillips	
2	
100
Slotted	 4.5	 125
Slotted	 5.5	 125
Square	
1	
100
Square	

2	

125	

Wiha Slim
TECHNOLOGY
Achieves blade
diameters up to
33% narrower
utilizing Wiha
integrated
insulation

23
23
Wiha Insulated Screwdrivers with SoftFinish Cushion Grip Handle
®

Each tool individually tested to
10,000 volts and rated to 1000
Volt ac or 1500 Volt dc

Insulation Test Standards:
Insulation according to EN/IEC 60900,
ASTM F-1505-01, New VDE 0682/part 201,
DIN 7437, NFPA70E & CSA

SoftFinish ® handle
solid molded core
with soft outer
cushion grip. 40%
more torque than
conventional handles

Responds to OSHA’s use
specification 29 CFR1910

Insulation
Molded directly
onto the blade for
permanent bonding
Blade
CVM tool steel, hardened
to average 58/60RC

page 32

1000Volt

1000Volt
WH320 Slotted Screwdriver, With Wiha-SoftFinish® Handle

Phillips Screwdriver, With Wiha-SoftFinish® Handle
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested. Blade high alloy CVM steel,
hardened, black finish. Insulation molded directly onto blade.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item
No.
Size 	mm 	 Inch mm 	 Inch lbs.	 pkg. 	
WH32100
	
0	
60	
2.4	 164	 6.5	 .06	 10	
WH32101
	
1	
80	
3.0	 191	 7.5	 .12	 10	
WH32102
	
2	
100	 4.0	 218	 8.6	 .20	 10	
WH32103
	
3	
150	 6.0	 268	 10.6	 .34	 10	
WH32104
	
4	
200	 8.0	 318	 12.5	 .39	 10	
WH321

Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested.
Item
No.	
mm	 Inch	 Inch	 mm 	 Inch mm	 Inch	 lbs. pkg.	
	WH32005 2.0	 .078	 5/64	 60	
3.0	 164	 6.5	 .05	 10		
	WH32010 2.5	 .098	 3/32	 75	
3.0	 179	 7.1	 .06	 10	
	WH32012 3.0	 .118	 1/8	 100	 4.0	 204	 8.0	 .07	 10	
	WH32015 3.5	 .139	 9/64	 100	 4.0	 204	 8.0	 .07	 10	
	WH32017 4.0	 .157	 5/32	 100	 4.0	 211	 8.3	 .12	 10	
	WH32023 4.5	 .177	 3/16	 100	 4.0	 211	 8.3	 .12	 10	
	WH32024 4.5	 .177	 3/16	 125	 5.0	 236	 9.3	 .12	 10	
	WH32027 4.5	 .177	 3/16	 150	 6.0	 261	 10.2	 .14	 10	
	WH32025 4.5	 .177	 3/16	 175	 7.0	 286	 11.2	 .13	 10	
	WH32028 4.5	 .177	 3/16	 200	 8.0	 311	 12.3	 .15	 10	
	WH32031 5.5	 .216	 7/32	 125	 5.0	 243	 9.5	 .15	 10	
	WH32026 5.5	 .216	 7/32	 175	 7.0	 293	 11.5	 .21	 10	
	WH32034 6.0	 .236	 15/64	150	 6.0	 268	 10.6	 .21	 10	
	WH32039 6.5	 .255	 1/4	 150	 6.0	 268	 10.6	 .21	 10	
	WH32042 8.0	 .315	 5/16	 175	 7.0	 299	 11.8	 .34	 10	
	WH32045 10.0	.393	 3/8	 200	 8.0	 318	 12.5	 .39	 10	

1000Volt

	
WH32091

5 Piece Slotted & Phillips Set	
		
Item
No.		
mm	 mm	 mm		
Size	 mm	
WH32091
	
Slotted	 3.0	 100	 0.6	
Phillips	 1	
80	
	
Slotted	 4.5	 125	 1.0	
Phillips	 2	
100	
	
Slotted	 6.5	 150	 1.2				

lbs.
1.31

1000Volt

1000Volt

WH32092
	

WH32090

4 Piece Slotted & Phillips Set
Item
No.		
mm	 mm	 mm		
Size	 mm	
	
Slotted	 3.5	 100	 0.6	
Phillips	 1	 80	
WH32090
	
Slotted	 4.5	 125	 1.0	
Phillips	 2	 100	

1000V

WH32892

.76 lbs.

6 Piece Slotted & Phillips Set			

Item
No.		
WH32092
	
Slotted	
	
Slotted	
	
Slotted	

mm	 mm	
3.5	 100	
4.5	 125	
6.5	 150	

mm		
0.6	
Phillips	
1.0	
Phillips	
1.2	
Phillips	

Size	
1	
2	
3	

mm	
80	
100	
150	

lbs.
1.31

24
Wiha Insulated Screwdriver Sets

Wiha Insulated Hex Mertic Screwdrivers
1000Volt

1000Volt
WH32094 13 Piece Slotted & Phillips Set

Item No.
	WH32094 Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 5.5, 6.5, 8.0, 10.0mm	
	
Phillips: 0, 1, 2, 3					

lbs.	
2.3

WH323
Hex Metric Screwdriver, With Wiha-SoftFinish® Handle
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E & CSA,
up to
1000 Volt. Individually Tested. Blade high alloy CVM steel,
hardened, black finish. Insulation molded directly onto blade.
Wiha-SoftFinish® handle, multi-component, cushion grip.
Item
No.
Size 	mm 	 Inch mm 	 Inch lbs.	 pkg. 	
WH32302
	
2.5	 75	
3.0	 179	 7.0	 .06	 10	
WH32303
	
3.0	 75	
3.0	 179	 7.0	 .08	 10	
WH32304
	
4.0	 75	
3.0	 186	 7.3	 .12	 10	
WH32305
	
5.0	 75	
3.0	 186	 7.3	 .15	 10	
WH32306
	
6.0	 100	 3.9	 218	 8.6	 .24	 10	
WH32308
	
8.0	 100	 3.9	 218	 8.6	 .34	 10

1000Volt

1000Volt
WH32093 10 Piece Slotted & Phillips Set

Item No.							
Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5		
	
Phillips: 0, 1, 2, 3				

WH32093
	

lbs.
1.63	

6 Piece Insulated Hex Metric Screwdriver Set
Item No.						
lbs.
WH32366
Hex Metric: 2.5, 3.0, 4.0, 5.0, 6.0, 8.0mm	
1.06

WH32366

1000Volt

Wiha Insulated Square Tip Screwdrivers
1000Volt

15 Piece Slotted, Phillips & Inch Nut Drivers Set
Item No.								
	
Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5, 8.0mm		
WH32190
	
Phillips: 1, 2, 3
	
Nut Drivers Inch: 1/4, 5/16, 3/8, 7/16, 1/2”

WH32190

lbs.
5.9

WH358
Square Tip Screwdriver, With Wiha-SoftFinish® Handle
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E and CSA,
up to
1000 Volt. Individually Tested. Blade high alloy CVM steel,
hardened, black finish. Insulation molded directly onto blade.
Item
No.	
Size	 mm	 Inch	 mm	 Inch	 lbs.	 pkg.	
	
1	
100	 4.0	 210	 8.2	 .12	 10	
WH35811
	
2	
150	 6.0	 268	 10.5	 .19	 10	
WH35812

NEW
From

Wiha

1000Volt
1000Volt
Tool box set
in blow molded tray
WH32095 19 Piece Slotted, Phillips, Square, Xeno Screwdriver Set

Insulated Screwdriver set in a light weight tool box tray.
Item No.		
	
Slotted: 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm
WH32095
	
Phillips: #0, #1, #2, #3
	
Square: #1, #2
lbs.	
Xeno Terminal: #1, #2
4.92	
Single Pole Voltage Detector 110V to 250V		

WH35890 6 Piece Insulated Slotted, Phillips & Square Screwdrivers

Item No.
	WH35890 Slotted: 4.5 x 125mm, 6.5 x 150mm		
	
Phillips: 1 x 80mm, 2 x 100mm		
	
Square: 1 x 100mm, 2 x 150mm

lbs.
.83

WH35891 6 Piece Insulated Slotted, Phillips & Square Screwdrivers

Item No.						
WH35890
Slotted: 3.0, 5.5mm Phillips: 1, 2 Square: 1, 2	

	

lbs.
.83

25
25
Wiha Insulated Nut Drivers

1000Volt
WH322

Nut Driver, With Wiha-SoftFinish® Handle Insulation
According to ASTM F-1505-01, New VDE Specification 0682/part 201
and EN/IEC 60900, NFPA70E & CSA,
up to 1000 Volt. Individually
Tested. Blade CVM steel, hardened. Insulation molded directly onto
blade. Deep drawn 1” socket. Wiha-SoftFinish® handle, multi-component.
Item
No.	
mm	 mm	 mm	 Inch	 lbs.	 pkg.	
WH32206
	
4.0	
125	 236	 9.3	 .15	 10	
WH32209
	
5.0	
125	 236	 9.3	 .16	 10	
WH32212
	
5.5	
125	 236	 9.3	 .16	 10	
WH32215
	
6.0	
125	 236	 9.3	 .16	 10	
WH32218
	
7.0	
125	 243	 9.6	 .25	 10	
WH32221
	
8.0	
125	 243	 9.6	 .25	 10	
WH32224
	
9.0	
125	 243	 9.6	 .25	 10	
WH32227
	
10.0	 125	 243	 9.6	 .27	 10	
WH32230
	
11.0	 125	 243	 9.6	 .37	 10	
WH32233
	
12.0	 125	 243	 9.6	 .38	 10	
WH32236
	
13.0	 125	 243	 9.6	 .39	 10	

1000Volt
WH322

Nut Driver, With Wiha-SoftFinish® Handle - Inch sizes.

Item
No.	
	WH32255
	WH32258
	WH32261
	WH32264
	WH32267
	WH32268
	WH32270
	WH32273
WH32276
	
WH32278
	
WH32280
	

Inch	 Inch	
5/32	 5.0	
3/16	 5.0	
7/32	 5.0	
1/4	 5.0	
5/16	 5.0	
11/32	 5.0	
3/8	 5.0	
7/16	 5.0	
1/2	 5.0	
9/16	 5.0	
5/8	 5.0	

mm	
236	
236	
236	
243	
243	
242	
243	
243	
243	
243	
243	

Inch	
9.3	
9.3	
9.3	
9.5	
9.5	
9.5	
9.5	
9.5	
9.5	
9.5	
9.5	

lbs.	
.15	
.15	
.16	
.24	
.25	
.26	
.26	
.36	
.39	
.39	
.41	

pkg.		
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	

1000Volt
WH32291

5 Piece Nut Driver Set - Metric Sizes
Item
No. 		
mm	
mm 		
mm	
mm	
WH32291
		
6.0	
125		
9.0	
125 	
		
7.0	
125		
10.0	
125	
		
8.0	
125	

lbs.
1.36

1000Volt

	

WH32293

7 Piece Nut Driver Set - Metric Sizes
Item
No. 		
mm	
mm		
mm	
mm	
		
5.0	
125		
8.0	
125	
WH32293
		
5.5	
125		
10.0	
125
		
6.0	
125		
13.0	
125	
		
7.0	
125				

lbs.
2.05

1000Volt

	

WH32292

5 Piece Nut Driver Set - Inch Sizes
Item
No. 		
Inch	
Inch		
Inch	 Inch	
WH32292
		
7/32	
5.0		
3/8	
5.0	
		
1/4	
5.0		
1/2	
5.0	
		
5/16	
5.0				

lbs.
1.52

1000Volt

	
11 Piece
Item
No. 		
WH32296
	
32255	
	
32258	
	
32261	
	
32264	
	
32267	
	
32268	

WH32296

Nut Driver Set - Inch Sizes
Inch	 Inch		
Inch	 Inch	
5/32	 5.0	
32270	 3/8	 5.0	
3/16	 5.0	
32273	 7/16	 5.0
7/32	 5.0	
32276	 1/2	 5.0	
1/4	 5.0	
32276	 9/16	 5.0	
5/16	 5.0	
32280	 5/8	 5.0	
11/32	 5.0				

1000Volt
lbs.
3.00

	

7 Piece Nut Driver
Item
No. 		
Inch	
		
3/16	
WH32294
		
7/32	
		
1/4	
		
5/16	

WH32294

Set - Inch Sizes
Inch		
Inch	
Inch	
5.0		
3/8	
5.0	
5.0		
7/16	
5.0
5.0		
1/2	
5.0	
5.0				

lbs.
2.24

26
Wiha Insulated Inch Nut Driver Set

Wiha Insulated

Screwdrivers

1000Volt
1000Volt
WH325

	
9 Piece Nut Driver Set - Inch
Item
No. 		
Inch	
Inch		
		
3/16	
5.0		
WH32288
		
1/4	
5.0		
		
5/16	
5.0		
		
11/32	
5.0		
		
3/8	
5.0

WH32288

Sizes. In roll-up pouch
Inch	
7/16	
1/2	
9/16	
5/8	

Inch	
5.0	
5.0
5.0	
5.0	

lbs.
3.16

Insulated Single-Pole Voltage Detector
1000Volt

Screwdriver, With Wiha-SoftFinish® Handle
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E and CSA,
up to
1000 Volt. Individually Tested. Blade high alloy cvm steel,
hardened, black finish. Insulation molded directly onto blade.
Item
No.	
Size	 mm	 Inch	 mm	 Inch	 lbs.	 pkg.	
	WH32505
T5	
60	 2.4	 164	 6.5	 .06	 10	
	WH32511
T6	
60	 2.4	 164	 6.5	 .06	 10	
	WH32516
T7	
60	 2.4	 164	 6.5	 .06	 10	
	WH32521
T8	
60	 2.4	 164	 6.5	 .06	 10	
	WH32526
T9	
60	 2.4	 164	 6.5	 .06	 10	
	WH32531
T10	 60	 2.4	 164	 6.5	 .06	 10	
	WH32536
T15	 80	 3.0	 191	 7.5	 .12	 10	
	WH32541
T20	 80	 3.0	 191	 7.5	 .12	 10	
	WH32546
T25	 80	 3.0	 198	 7.8	 .17	 10	
	WH32551
T27	 100	 4.0	 218	 8.6	 .20	 10	
	WH32556
T30	 100	 4.0	 218	 8.6	 .20	 10	
	WH32561
T40	 150	 6.0	 274	 10.8	 .30	 10	

WH25511 Insulated Single-Pole Voltage Detector. 110-250 Volts.

Insulation According To DIN 57860/6 And DIN VDE 0680-6,
GS Tested. Blade CVM steel, hardened, nickel-plated. Insulation
molded directly onto blade. Amber LED light. 10,000Volt tested.
Item					
No.	
mm	
mm	 mm	 Inch	
lbs.	
pkg.	
WH25511
	
3.0	
65	
145	 5.7	
.04	
1

Insulated Terminal Block Xeno Screwdrivers

Combination Slotted/Phillips
Terminal Block Drivers

1000Volt

1000Volt
WH32590

6 Piece

Item
No.		
WH32590
		
		
		

Set
Size	
T8	
T9	
T10	

mm		
60		
60		
60		

Slotted
& Phillips

WH307 Combination Terminal Block Xeno Screwdriver, With Wiha
SoftFinish® Handle. Insulation According to ASTM F-1505-01,
VDE, 0682/part 201, EN/IEC 60900, NFPA70E & CSA specification.
Individually Tested. Blade CVM steel, hardened, black finish. Insulation
molded directly onto blade. Wiha-SoftFinish® handle, multi-component,
cushion grip. For combination Slotted/Phillips head terminal screws.
Item					
No.	
Size	
mm	 mm	 Inch	
lbs.	
pkg.	
	WH30700
1	
80	
191	 7.5	
1.23	 10	
	WH30701
2	
100	 218	 8.6	
1.23	 10	

Size	
T15	
T20	
T25	

mm	
lbs.
80	
.83
80		
80	

1000Volt

WH32592

10 Piece

Item
No.		
WH32592
		
		
		
		
		

Size	
T6	
T7	
T8	
T9	
T10	

Set
mm		
60		
60		
60		
60		
60		

Size	
T15	
T20	
T25	
T27	
T30	

mm	
lbs.
80	
1.2
80		
80	
100		
100	

27
27

Wiha Insulated “BitFlip” Sets

“8-In-1 Bit Sets”
BitFlip standard SoftFinish®
handle, multi-component,
cushion grip, easy access
& 8 bit storage

8-in-1 Bit Sets
Tested to 10,000Volts

Insulated
Each insulated
tool individually
tested to
10,000 volts

WH38017

Insulated BitFlip With Slotted/Phillips/TORX® Bits
Wiha cushion grip handle and insulated shaft. Tested to 10,000 volts.
Set includes the following 1/4” bits:
Slotted: 4.5, 6.5mm			
Phillips: 1, 2			
TORX® : T10, T15, T20, T25		

	
	
	
	

Blade CVM tool
steel, hardened

8-in-1 Bit Sets

lbs.	
.45	

8-in-1 Bit Sets

Tested to 10,000Volts

Tested to 10,000Volts

Insulated

Insulated

Insulated BitFlip With Slotted/Phillips/Square Bits
Wiha cushion grip handle and insulated shaft. Tested to 10,000 volts.

WH38016

	
	
	
	

Set includes the following 1/4” bits:
Slotted: 4.5, 6.5mm			
Phillips: 0, 1, 2, 3			
Square: 1, 2			

lbs.	
.45	

WH38018

Insulated BitFlip With Slotted/Phillips Bits
Wiha cushion grip handle and insulated shaft. Tested to 10,000 volts.

	
	
	

Set includes the following 1/4” bits: 	
Slotted: 4.5, 5.5, 6.5, 8.0mm		
Phillips: 0, 1, 2, 3			

lbs.		
.45	

Wiha Insulated Retaining Ring Bit Holder
Holds 1/4” drive bits

1000Volt
WH32650 Retaining Ring Bit Holding Screwdriver, With Wiha-

SoftFinish® Handle Insulation According to VDE, ASTM F-1505-01
and EN/IEC 60900, NFPA70E & CSA,
up to 1000 Volt.
Blade high alloy CVM steel, hardened, black finish. Insulation molded
directly onto blade. Wiha-SoftFinish® handle, multi-component.
Item
No.	
Size	 mm	 Inch	 mm	 Inch	 lbs.	 pkg.	
WH32650
	
1/4”	 125	 4.9	 242	 9.5	 .06	 10	

WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.

28
Wiha Insulated Belt Pack Pouch Sets
Insulation Test Standards:
Insulation according to EN/IEC 60900,
ASTM F-1505-01, New VDE 0682/part 201,
DIN 7437, NFPA70E & CSA

1000Volt
WH32871 3 Piece Insulated Pliers/Cutters & Multi-Bit Set In Belt

Pack Pouch Tools meet EN/IEC, ASTM, VDE, NFPA70E & CSA
standards. Pliers chrome finish for long lasting corrosion protection.
Soft grip ergo designed handle body, safety slip guard. Insulated
multi-bit screwdriver includes Slotted, Phillips & Square bits.
Item No. 	 Pliers/Cutters & Multi-Bit Set
6.3” / 160mm Diagonal Cutters
	
8.0” / 200mm Long Nose Pliers
	
Set includes Bit Holder and the following bits:
	
Slotted: 4.5, 6.5mm • Phillips: 1, 2 • Square: 1, 2
	
lbs. 1.67

WH32871
	

1000Volt
WH32872 5 Piece Insulated Pliers/Cutters & Screwdrivers In Belt

EWW
iha
N
From

Pack Pouch Tools meet EN/IEC, ASTM, VDE, NFPA70E & CSA
standards. Pliers chrome finish for long lasting corrosion protection.
Soft grip ergo designed handle body, safety slip guard. Insulated
cushion grip drivers, multi-component. Blade CVM tool steel, hardened.
Item No. 	 Insulated Pliers/Cutters & Screwdrivers
	WH32872
6.3” / 160mm Diagonal Cutters
	
8.0” / 200mm Long Nose Pliers
	
Insulated Screwdrivers:
	
Slotted: 3.0, 4.5mm • Phillips: 2
	
lbs. 1.77

1000Volt
WH32875 5 Piece Insulated Pliers/Cutters & Screwdrivers In Belt

Pack Pouch Tools meet EN/IEC, ASTM, VDE, NFPA70E & CSA
standards. Pliers chrome finish for long lasting corrosion protection.
Soft grip ergo designed handle body, safety slip guard. Insulated
cushion grip drivers, multi-component. Blade CVM tool steel, hardened.
Item No. 	 Insulated Pliers/Cutters & Screwdrivers
WH32875
	
9.0” / 225mm Lineman’s Pliers
	
8.0” / 200mm Long Nose Pliers
	
Insulated Screwdrivers:
	
Slotted: 4.5, 6.5mm • Phillips: 1
	
lbs. 2.26

1000Volt
WH32873 3 Piece Insulated Pliers/Cutters In Belt Pack Pouch

Tools meet EN/IEC, ASTM, VDE, NFPA70E & CSA standards.
Pliers chrome finish for long lasting corrosion protection.
Soft grip ergo designed handle body, safety slip guard.
Item No. 	 Insulated Pliers & Cutters
6.3” / 160mm Diagonal Cutters
	
8.0” / 200mm Long Nose Pliers
	
8.0” / 200mm Combination Pliers
	
lbs. 2.07

WH32873
	

29
29

Wiha Insulated Tools-Comfort Grip Handles

NEW
From

Wiha

All Tools In
Dedicated
Positions For
Quick Storage
& Easy Location
Tracking

1000Volt

WH32800 80 Piece Insulated Master Electrician’s Tool Set In Rolling Water Tight Traveling Tool Box - 10,000Volt Tested, 1000Volt Rated
Insulated Phillips #0
Insulated Slotted 2.5mm	
Item# WH32800
	
Set Includes:	 		
lbs. 33.9	

6.3” Long Nose Pliers		
	
8.0” Long Nose Pliers		
	
6.3” Bent Nose Pliers		
	
6.3” Long Flat Nose Pliers	
	
9.0” Combo Pliers/Crimpers	
	
Insulated Socket 1/2”
Insulated Socket 9/16”
Insulated Socket 5/8”
Insulated Socket 11/16”
Insulated Socket 3/4”
Insulated Socket 13/16”
Insulated Socket 7/8”
Insulated Socket 13mm
Insulated Socket 14mm
Insulated Socket 15mm
Insulated Socket 17mm
Insulated Socket 19mm
Insulated Socket 20mm
Insulated Socket 22mm
Insulated Ratchet 3/8” Drive
Insulated 4.9” Extension 3/8” Dr.

6.3” Diagonal Cutters 	
8.0” High Leverage Cutters
6.3” Cable Cutters
6.3” Stripping Pliers
8.0” Adjustable Wrench	
Insulated Nut Driver 7/32”
Insulated Nut Driver 1/4”
Insulated Nut Driver 5/16”
Insulated Nut Driver 3/8”
Insulated Nut Driver 7/16”
Insulated Nut Driver 5.0mm
Insulated Nut Driver 5.5mm
Insulated Nut Driver 6.0mm
Insulated Nut Driver 7.0mm
Insulated Nut Driver 8.0mm
Insulated Nut Driver 10.0mm
Insulated Nut Driver 13.0mm
Insulated Cable Knife 50mm
2 Meter Ruler In/MM
Single Pole Voltage Detector110V to 250V

Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature
is between -20 to +70O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.

Insulated Slotted 3.0mm	
Insulated Slotted 3.5mm	
Insulated Slotted 4.0mm	
Insulated Slotted 4.5mm	
Insulated Slotted 5.5mm
Insulated Slotted 6.0mm
Insulated Slotted 6.5mm
Insulated Slotted 8.0mm
Insulated Slotted 10.0mm
Insulated T-handle Hex 5/32”
Insulated T-handle Hex 3/16”	
Insulated T-handle Hex 7/32”	
Insulated T-handle Hex 1/4”		
Insulated T-handle Hex 5/16”	
Insulated T-handle Hex 3/8”	
Insulated T-handle Hex 4.0mm
Insulated T-handle Hex 5.0mm
Insulated T-handle Hex 6.0mm	
Insulated T-handle Hex 8.0mm	

Insulated Phillips #1
Insulated Phillips #2
Insulated Phillips #3
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated

Slt/Ph Terminal #1
Slt/Ph Terminal #2
Square #1
Square #2
Torx T6
Torx T7
Torx T8
Torx T9
Torx T10
Torx T15
Torx T20
Torx T25	
Torx T30

Insulated L-key 10mm
Insulated L-key 1/2”

WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.

30
Wiha 1000Volt Insulated Tool Sets - Comfort Grip Handles
Master Electrician’s Set
80 Pc.
BIGGEST
SET

66 Pc.
BIGGER
SET
1000Volt

1000Volt
WH32877

80 Piece Insulated Master Electrician’s Set
Item# WH32877
		
Set Includes:		
lbs. 27.0	
6.3” Long Nose Pliers		
	
6.3” Diagonal Cutters 	
6.3” Bent Nose Pliers		
	
8.0” High Leverage Cutters
8.0” Long Nose Pliers		
	
8.0” Cable Cutters
6.3” Long Flat Nose Pliers	
	
6.3” Stripping Pliers
9.0” Combo Pliers/Crimpers	
	
8.0” Adjustable Wrench	
Insulated Nut Driver 7/32”
Insulated Slotted 2.0mm
Insulated Nut Driver 1/4”
Insulated Slotted 2.5mm	
Insulated Nut Driver 5/16”
Insulated Slotted 3.0mm	
Insulated Nut Driver 3/8”
Insulated Slotted 3.5mm	
Insulated Nut Driver 7/16”
Insulated Slotted 4.0mm	
Insulated Slotted 4.5mm	
Insulated Nut Driver 5.0mm
Insulated Slotted 5.5mm
Insulated Nut Driver 5.5mm
Insulated Slotted 6.0mm
Insulated Nut Driver 6.0mm
Insulated Slotted 6.5mm
Insulated Nut Driver 7.0mm
Insulated Slotted 8.0mm
Insulated Nut Driver 8.0mm
Insulated Slotted 10.0mm
Insulated Nut Driver 10.0mm
Insulated Phillips #0
Insulated Nut Driver 13.0mm
Insulated Phillips #1
Insulated T-handle Hex 5/32”
Insulated Phillips #2
Insulated T-handle Hex 3/16”	
Insulated Phillips #3
Insulated T-handle Hex 7/32”	
Insulated Slt/Ph Terminal #1
Insulated T-handle Hex 1/4”		
Insulated Slt/Ph Terminal #2
Insulated T-handle Hex 5/16”	
Insulated T-handle Hex 3/8”	
Insulated Torx T6
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated

Torx T7
Torx T8
Torx T9
Torx T10
Torx T15
Torx T20
Torx T25	
Torx T30
Square #1
Square #2
Socket 1/2”
Socket 9/16”
Socket 5/8”
Socket 11/16”
Socket 3/4”
Socket 13/16”
Socket 7/8”

Insulated
Insulated
Insulated
Insulated

T-handle
T-handle
T-handle
T-handle

Hex
Hex
Hex
Hex

4.0mm
5.0mm
6.0mm	
8.0mm	

Insulated L-key 10mm
Insulated L-key 1/2”
Insulated Cable Knife 50mm
2 Meter Ruler In/MM
Insulated Ratchet 3/8” Dr.
Insulated 4.9” Extension
Insulated Socket 13mm
Insulated Socket 14mm
Insulated Socket 15mm
Insulated Socket 17mm
Insulated Socket 19mm
Insulated Socket 20mm
Insulated Socket 22mm

WH32876 66 Pc. Master Electrician’s Set. Insulation According to

VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested. Pliers drop-forged from special
tool steel, individually high frequency induction hardened, chrome/nickel
plated, mirror-polished.
WH32876 66 Pc. Master Electrician’s Insulated Set
WH32876 Set Includes:	
Item# 		
lbs. 21.5 	
8.0” Long Nose				
6.3” Side Cutters 	
6.3” Long Flat Nose				
8.0” High Leverage Cutters
9.0” Combo Pliers/Crimpers		
6.3” Stripping Pliers
8.0” Cable Cutters				
8.0” Adjustable Wrench
Insulated Nut Driver 1/4”			
Insulated Slotted 2.0mm
Insulated Nut Driver 5/16”			
Insulated Slotted 2.5mm
Insulated Nut Driver 11/32”		
Insulated Slotted 3.0mm			
Insulated Nut Driver 3/8”	 		
Insulated Slotted 4.0mm
Insulated Nut Driver 7/16”			
Insulated Slotted 4.5mm	
Insulated T-handle Hex 4.0mm		
Insulated Slotted 5.5mm
Insulated T-handle Hex 5.0mm		
Insulated Slotted 6.0mm
Insulated T-handle Hex 6.0mm		
Insulated Slotted 8.0mm
Insulated T-handle Hex 8.0mm		
Insulated Slotted 10.0mm
Insulated T-handle Hex 5/32”		
Insulated Phillips #0
Insulated T-handle Hex 3/16”		
Insulated Phillips #1				
Insulated T-handle Hex 7/32”	 	
Insulated Phillips #2
Insulated T-handle Hex 1/4”		
Insulated Phillips #3
Insulated T-handle Hex 5/16”		
Insulated Torx T8
Insulated T-handle Hex 3/8”		
Insulated Torx T10
Insulated Hex L-key 10.0mm		
Insulated Torx T15
Insulated Hex L-key 1/2”			
Insulated Torx T20
Insulated Socket 1/2”			
Insulated Torx T25
Insulated Socket 9/16”			
Insulated Torx T30
Insulated Socket 5/8”			
Insulated Square #1
Insulated Socket 11/16”			
Insulated Square #2
Insulated Socket 3/4”			
Insulated Slt/Ph Terminal #1x80
Insulated Socket 13/16”			
Insulated Slt/Ph Terminal #2x100
Insulated Socket 7/8”			
Insulated Cable Knife 50mm
Insulated Socket 8.0mm			
Insulated Extension 4.9”
Insulated Socket 10.0mm			
Insulated Ratchet 3/8” Driver
Insulated Socket 13.0mm			
Insulated Socket 17.0mm
Insulated Socket 14.0mm			
Insulated Socket 19.0mm
Insulated Socket 15.0mm			
Insulated Socket 22.0mm

31
31
Wiha 1000Volt Insulated Tool Sets - Comfort Grip Handles

25 Pc.
Set

1000Volt

48 Pc. BIG SET

1000Volt

WH32874 48 Piece Insulated Tool Set. Insulation According to

WH32879 25 Piece Pliers & Screwdriver Set. Insulation According to

VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested. Pliers drop-forged from special
tool steel, individually high frequency induction hardened, chrome/nickel
plated, mirror-polished. Cushion Grip Insulated handles. Canvas tool bag.

VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E &
CSA,
up to 1000 volt. Individually Tested.
Pliers drop-forged from special tool steel, individually high frequency
induction hardened, chrome/nickel plated, mirror-polished. In tool box.

WH32874 48 Piece Insulated Tool
Item# WH32874
		
Set Includes:	
6.3” Long Nose Pliers			
8.0” Long Nose Pliers			
6.3” Combination Pliers			
9.0” Combo Pliers/Crimpers		
Insulated Nut Driver 7/32”			
Insulated Nut Driver 1/4”			
Insulated Nut Driver 5/16”			
Insulated Nut Driver 3/8”			
Insulated Nut Driver 7/16”			
Insulated Nut Driver 1/2”			
Insulated T-handle Hex 5/32”		
Insulated T-handle Hex 3/16”		
Insulated T-handle Hex 7/32”		
Insulated T-handle Hex 1/4”		
Insulated T-handle Hex 5/16”		
Insulated T-handle Hex 3/8”		
Insulated Torx T8				
Insulated Torx T9				
Insulated Torx T10				
Insulated Torx T15				
Insulated Torx T20				
Insulated Torx T25				
Insulated Torx T27				
Insulated Torx T30				

WH32879

Set
lbs. 19.4 	
6.3” Side Cutters 	
8.0” High Leverage Cutters
6.3” Stripping Pliers
8.0” Adjustable Wrench
Insulated Slotted 2.0mm
Insulated Slotted 2.5mm
Insulated Slotted 3.0mm		
Insulated Slotted 3.5mm			
Insulated Slotted 4.0	mm
Insulated Slotted 4.5mm
Insulated Slotted 5.5mm
Insulated Slotted 6.0mm
Insulated Slotted 6.5mm
Insulated Slotted 8.0mm
Insulated Phillips #0
Insulated Phillips #1
Insulated Phillips #2
Insulated Phillips #3
Insulated Square #1
Insulated Square #2
Insulated Slt/Ph Terminal #1	
Insulated Slt/Ph Terminal #2
Insulated Cable Knife 50mm
2 Meter Ruler In/MM

WH32878 13 Piece Pliers & Screwdriver Set. In Tool Box
Item# WH32878
	 	
Set Includes:		
lbs. 6.60 		
	

8.0” Long Nose				
8.0” High Leverage Cutters		
Insulated Slotted: 3.0mm			
Insulated Slotted: 4.5mm			
Insulated Slotted: 6.0mm			
Insulated Slt/Ph Terminal: #1		
Insulated Slt/Ph Terminal: #2	

9.0” Combo Pliers/Crimpers
50mm Cable Stripping Knife
Insulated Phillips: #1
Insulated Phillips: #2
Insulated Square: #1
Insulated Square: #2

25 Piece Master Electrician’s Insulated Set
Item# WH32879
	 	
Set Includes:		
lbs. 11.92	
8.0” Long Nose			
6.3” Stripping Pliers 	
9.0” Combination Pliers		
Inch & Metric Folding Ruler
8.0” High Leverage Cutters	
8.5” Insulated Knife
Slotted: 3.0, 4.5, 6.0mm 			
Phillips: #1, #2
Square: #1, #2				
Terminal Block Driver: #1, #2
Inch Nut Driver: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2”
Metric Nut Driver: 7.0, 8.0, 10.0, 13.0mm

31 Pc.
Set

1000Volt
WH32896 31 Piece Pliers & Screwdriver Set. Insulation According to

VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested. Pliers drop-forged from special
tool steel, individually high frequency induction hardened, chrome/nickel
plated, mirror-polished. Set includes 6ft. Fiber glass folding ruler.
WH32896

31 Pc. Master Electrician’s Insulated Set. In Tool Box

Item# WH32896
	 	
Set Includes:		
lbs. 12.85	 	
6.3” Long Nose Pliers		
6.3” Side Cutters 	
8.0” Long Nose Pliers		
8.0” High Leverage Cutters
7.0” Linemans	 Pliers			
6.3” Stripping Pliers
9.0” Combination Pliers
	 6.3” Round Nose Pliers
Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 5.5, 6.5, 8.0, 10.0mm
Phillips: #0, #1, #2, #3
Inch Nut Driver: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16”

32
Wiha Insulated Pliers with High Visibility Comfort Grip Handle
1000Volt
1000Volt

WH32888
WH32891 10 Piece Pliers & Screwdriver Set

Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM
F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested.
Item# WH32891
	 	
Set Includes:			
lbs. 5.54	
8.0” Combination Pliers 			
8.0” Long Nose
8.0” Side Cutters
		
8.0” Cable Cutters
6.3” Universal Wire Stripper	
Insulated Phillips #1				
Insulated Slotted 4.5mm
Insulated Phillips #2				
Insulated Slotted 6.5mm
Insulated Phillips #3	

11 Piece Pliers & Screwdriver Set In Canvas Pouch
Item# WH32888
	 	
Set Includes:		
lbs. 3.58	 	
6.3” Long Nose				
6.3” Side Cutters 	
8.0” Combination Pliers 			
6.3” Stripping Pliers
Insulated Slotted 2.5mm			
Insulated Phillips #0
Insulated Slotted 3.5mm			
Insulated Phillips #1
Insulated Slotted 4.5mm			
Insulated Phillips #2
Insulated Slotted 6.0mm		

1000Volt
1000Volt
WH32895 14 Piece Pliers & Screwdriver Set

Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM
F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested.
WH32895 14 Piece Pliers & Screwdriver Set. In Zipper Case

Item# WH32895
	 	
Set Includes:		
8.0” Long Nose				
9.0” Combination Pliers			
6.3” Stripping Pliers
			
Insulated Phillips #1				
Insulated Phillips #2				
Insulated Phillips #3				
Insulated Slotted 2.0mm			

lbs. 6.60 		
	
6.3” Side Cutters 	
8.0” High Leverage Cutters
Insulated Slotted 2.5mm	
Insulated Slotted 3.0mm		
Insulated Slotted 3.5mm		
Insulated Slotted 4.5mm	
Insulated Slotted 6.5mm	

WH32892 10 Piece Pliers & Screwdriver Set. Insulation According
to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E
& CSA,
up to 1000 volt. Individually Tested. Pliers drop-forged
from special tool steel, individually high frequency induction hardened,
chrome and nickel plated, mirror-polished. In molded tool box
Item# WH32892
	 	
Set Includes:			
lbs. 6.64 	
8.0” Bent Nose					
8.0” Combination Pliers 	
6.3” Long Nose				
6.3” Side Cutters
Insulated Phillips #0				
Insulated Slotted 3.0mm
Insulated Phillips #1				
Insulated Slotted 4.5mm
Insulated Phillips #2				
Insulated Slotted 6.5mm

1000Volt

WH32894 12 Piece Pliers & Screwdriver Set In Molded Tool Box
Item# WH32894
	 	
Set Includes:		
lbs. 8.60 		
	
8.0” Bent Nose					
8.0” Combination Pliers 	
6.3” Long Nose				
6.3” Side Cutters
Insulated Slotted 4.5mm			
Insulated Nut Driver 1/4”
Insulated Slotted 6.5mm			
Insulated Nut Driver 5/16”
Insulated Phillips #1				
Insulated Nut Driver 3/8”
Insulated Phillips #2				
Insulated Nut Driver 1/2”

33
33
Wiha Insulated Pliers with High Visibility Comfort Grip Handle

NEW

• Pliers drop-forged
from special tool steel,
individually high
frequency induction
hardened, chrome
and nickel plated,
mirror-polished.

1000Volt

From

Wiha

1000Volt

WH32889 8 Piece Pliers & Cutters Set

WH32869 14 Piece Pliers/Cutters & Screwdrivers Set

Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM
F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested.
Item# WH32889
	 	
Set Includes:			
lbs. 4.63	
6.3” Long Nose Pliers			
8.0” Long Nose Pliers
6.3” Lineman’s Pliers	 	 		
6.3” Diagonal Cutters
9.0” Lineman’s Pliers
		
8.0” High Lev. Cutters
6.3” Wire Stripping Pliers			
Electrician’s Knife

Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM
F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested.
Item# WH32869
	 	
Set Includes:			
lbs. 6.52	
9.0” Lineman’s Pliers
		
8.0” High Leverage Cutters
8.0” Cable Cutters				
8.0” Long Nose Pliers
6.0” Stripping Pliers 10-20 AWG
SlimLine Slotted 3.0mm			
SlimLine Phillips #1
SlimLine Slotted 4.5mm			
SlimLine Phillips #2
SlimLine Slotted 6.5mm			
SlimLine Terminal #2
SlimLine Square #1				
Single Pole Tester
SlimLine Square #2

NEW
From

NEW

a

Wih

1000Volt

From

Wiha

1000Volt

WH32867

WH32868

WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.

Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature
is between -20 to +70O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.

10 Piece Pliers & Screwdriver Set In Canvas Pouch
Item# WH32867
	 	
Set Includes:		
lbs. 4.06	 	
6.3” Diagonal Cutters			
9.0” Combo Pliers
6.3” Long Nose Pliers			
6.3” Wire Strippers
7.0” Crimping Pliers
Insulated Slotted 4.5mm			
Insulated Phillips #1
Insulated Slotted 6.0mm			
Insulated Phillips #2
Insulated Square: #2	

10 Piece Pliers & Screwdriver Set In Canvas Pouch
Item# WH32868
	 	
Set Includes:		
lbs. 4.24	 	
7.0” Diagonal Cutters			
9.0” Combo Pliers
8.0” Long Nose Pliers			
6.3” Wire Strippers
7.0” Crimping Pliers
Insulated Slotted 3.0mm			
Insulated Phillips #1
Insulated Slotted 4.5mm			
Insulated Phillips #2
Insulated Slotted 6.0mm	

34
Wiha Insulated Pliers & Cutters
Insulation Standards:
EN/IEC 60900, ASTM F-1505-01,
and or According to VDE 0682/part 201,
NFPA70E and CSA

1000V

Cutters additionally
induction hardened
Soft grip ergonomically
designed handle body
Safety slip
guard

Hard chrome finish for
long lasting corrosion
protection

Tools Meet 10,000 Volt Test Standards
Rated to 1000 Volt ac or 1500 Volt dc

Insulated Linemans Pliers With Crimpers
5-In-1 Lineman’s Pliers

1000volt
With Lower Crimping Jaw
Insulated High Leverage Combination Pliers
Lineman’s

1000volt

Insulated Combination Lineman’s Pliers

1000volt

WH32821 Insulated Lineman’s Pliers “5-In-1” Professional Design

Insulation According to EN/IEC, ASTM, NFPA70E & CSA,
up to 1000 volt. Individually Tested.
Deep cut radius conduit jaws for non-slip handling. Sure grip knurled
& cross hatched flat jaw for non-slip griping. Extra long induction
hardened precision matched cutting edges. Lower crimping jaw accepts
most standard non-insulated electrical connectors. Large head with
square anvil surface on each side. Made from premium CV tool steel
forgings. Two component cushion grips for best user comfort.
Item
No.	
WH32821
	

Cutting Capacity
Copper AWG
mm	 Inch		
225	 9.0	
#4	

Pkg.	 wt.	
1	
.88	

WH32820 High Leverage Combination Pliers. Insulation According
to EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000
volt. Individually Tested. DIN ISO 5746
Extra long cutting edge for flat and round cables. Serrated jaws.
Cutting edges additionally induction hardened to approx. 64HRC.
C 60 Special tool steel. Use for gripping, pulling & holding as well as
cutting wires and cables ranging in hardness from soft to extremely
hard. Two component soft grip ergonomic handles.

Item
No.	
WH32820
	

Cutting Capacity
Copper AWG
mm	 Inch		
225	 9.0	
#4	

Pkg.	 wt.	
1	
.86	

WH328 Combination Pliers. Insulation According to VDE 0682/part
201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to
1000 volt. Individually Tested. DIN ISO 5746 Extra long cutting edge
for flat & round cables. Serrated jaws. Cutting edges additionally
induction hardened to approx. 60HRC. Special CV tool steel forgings,
Chrome finish. Use for gripping and holding as well as cutting soft and
hard wires and cables. Two component soft grip ergonomic handles.

Item
No.	
WH32814
	
WH32816
	
WH32818
	

Cutting Capacity

mm	
160	
180	
200	

Copper AWG
Inch		
6.3	
#10	
7.0	
#9	
8.0	
#8	

Pkg.	
1	
1	
1	

wt.	
.53	
.58	
.72	

35
35
Insulated Diagonal Cutters

WH328 Diagonal Cutters. Insulation According to VDE 0682/part 201,
EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt.
Individually Tested. DIN ISO 5749 Low wear lap joint, riveted and
able to withstand high levels of load. Lightweight action, clean
cutting. Long term cutting is achieved through additional inductive
hardening to approx. 60 HRC. Special tool steel hardened and tempered.
For soft & medium hard wire. 32832 & 32834 for soft, hard & piano wire.

Item
No.	
WH32830
	
WH32832
	
WH32834
	

1000volt

Insulated High Leverage Diagonal Cutters

New dynamic joint provides
40% easier cuts and
significantly longer tool life

1000volt

Insulated Electrician’s Diagonal Cutters
Strips AWG
#10 & #14

Cutting Capacity

mm	
140	
160	
180	

Copper AWG
Inch		
5.5	
#6	
6.3	
#6	
7.0	
#6	

Pkg.	
1	
1	
1	

wt.	
.47	
.49	
.62	

WH328 High Leverage Diagonal Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E &
CSA,
up to 1000 volt. Individually Tested. DIN ISO 5749
Semi-circular. Low wear lap joint, riveted and able to withstand high
levels of load. Lightweight action, clean cutting. Long term cutting is
achieved through additional inductive hardening to approx. 64 HRC.
C 60 special tool steel hardened and tempered to high quality. For soft,
hard and piano wire, lay-on joint, optimized power transmission.

Item
No.	
WH32835
	
WH32836
	
WH32838
	

Cutting Capacity

mm	
160	
180	
200	

Copper AWG
Inch		
6.3	
#6	
7.0	
#5	
8.0	
#4	

Pkg.	
1	
1	
1	

wt.	
.64	
.67	
.80	

WH32861 Diagonal Cutters W/Stripping Holes. Insulation According
to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E &
CSA,
up to 1000 volt. Individually Tested. Drop-forged from special
tool steel, cutters additionally induction hardened (approx. 60 HRC),
chrome-nickel plated, mirror-polished. Ergo comfort grip with slip guard.
Holes in the cutting edge for stripping copper wire of Ø 1.5 and 2.5.

1000volt

Item
No.	
WH32861
	

Insulated Serrated Edge Cable Cutters

WH328 Serrated Edge Cable Cutters. Insulation According to VDE

Cutting Capacity

mm	
160	

Copper AWG
Inch		
6.3	
#6	

0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA,
up to 1000 Volt. Individually Tested. Light, clean cutting ground
precision cutting edges. Durable cutting is achieved through additional
inductive hardening to approx. 62 HRC. Special tool steel, hardened &
tempered. For cutting of copper & aluminum cables without crushing.
Item 			
No.	
mm	 Inch	
WH32826
	
160	 6.3	
WH32828
	
200	 8.0	

1000volt
Insulated Crimping Pliers
NEWWiha

From

Pkg.	 wt.	
1	
.55	

	
Ø	
16	
20	

mm2	
50	
60	

Pkg.	
1	
1	

lbs.
.42
.67

WH32841
Insulated Crimping Pliers. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E
and CSA,
up to 1000 Volt. Individually Tested.
Semi-circular profiles for secure connection between end sleeve and
conductor. Long life is achieved through additional induction hardening
to 64 HRC. CV 60 special tool steel hardened & tempered.

Item
No.	
WH32841
	

mm	 Inch	 mm2	 AWG	 Pkg.	 wt.	
180	 7.0	 0.25-2.5	 6-30	 1	
.57

36
Insulated Long Nose Pliers

WH328 Long Nose Pliers With Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested. Drop-forged from special tool
steel, cutters additionally induction hardened (approx. 60 HRC), chromenickel plated, mirror-polished, ergonomic comfort grip with slip guard,
half-round jaws, serrated gripping surface.

Item
No.	
WH32806
	
WH32808
	

1000volt

Insulated Bent Nose Pliers

Item
No.	
WH32804
	
WH32807
	

1000volt

Round Nose Pliers

Pkg.	 wt.	
1	
.32	
1	
.42	

Cutting Capacity

mm	
200	
160	

Copper AWG
Inch		
8.0	
#8	
6.3	
#10	

Pkg.	 wt.	
1	
.43	
1	
.32	

WH32870 Round Nose Pliers. Insulation According to VDE 0682/part
201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to
1000 volt. Individually Tested. Drop-forged from special tool
steel, individually induction hardened, chrome and nickel plated,
mirror-polished. Ergonomic comfort grip with slip guard. Serrated jaws.

1000volt

Item
No.	
WH32870
	

Insulated Long Flat Nose Pliers

1000volt

mm	
160	

Inch		
6.3			

Pkg.	
1	

wt.	
.34	

WH32810 Long Flat Nose Pliers. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E &
CSA,
up to 1000 volt. Individually Tested. DIN ISO 5745
Extra long head. Serrated Jaws are induction hardened. Special CV
tool steel forgings, Chrome finish. Two component Soft Grip handles.
Use for Gripping and right-angle bending of wires and sheet metal parts.

Item
No.	
	WH32810

· Canvas holster with belt clip and belt loop
· Security pliers strap
· Screwdriver holder in the front

Copper AWG
Inch		
6.3	
#10	
8.0	
#8	

WH328 Bent Nose Pliers With Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E &
CSA,
up to 1000 volt. Individually Tested.
Drop-forged from special tool steel, cutters additionally induction
hardened (approx. 60 HRC), chrome-nickel plated, mirror-polished.
Ergonomic comfort grip with slip guard. Half-round jaws, serrated
gripping surface, nose bent 40o.

Angled 40O

Wiha Canvas Pliers Holster

Cutting Capacity

mm	
160	
200	

mm	
160	

Inch			
6.3			

WH91256 Pliers Canvas Holster

Item	
No.	
	
WH91256

Width	 Height	
Size		 Size	 lbs.	 pkg.
3.5	 x	 6.75	 .15	 1

Pkg.	
1	

wt.	
.39	

37
37
Insulated Stripping Pliers

NEW

1000volt

From

Wiha

1000Volt
WH32860 Stripping Pliers. Insulation According to VDE 0682/part

WH10250 Insulated Stripping Pliers. Insulation According to EN/IEC

201, EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA,
up to 1000 volt. Individually Tested. Heavy duty forged with
induction hardened cutting edges for even stripping of insulation.
Drop-forged from special tool steel, chrome and nickel plated,
mirror-polished. Ergonomic comfort grip with slip guard. Spring and
adjusting screw, for stripping up to Ø 5mm/#4 Awg.

60900, DIN ISO 8976, ASTM F-1505 & CSA Specification.
Individually Tested. Wide long head with ridged gripping surface, shears
blade and firm wire stripping stations. Wire stripping stations 0.81 / 1.0 /
1.3 / 1.6 / 2.0 / 2.59mm, AWG 20 / 18 / 16 / 14 / 12 / 10.
Item No.	 mm	
Inch	
Ø	
AWG	
Pkg.	 lbs.	
	WH10250
160	
6.3”	 0.81-2.59	 20-10	 5	
.26	

Item
No.	
WH32860
	

Stripping Capacity
Copper AWG
mm	 Inch		
160	 6.3	
#4 - #28	

Pkg.	 wt.	
1	
.50	

Wiha Inomic 1000Volt Insulated Pliers
Insulation Standards:

Award winning ergonomic
design with head mounted at
23° angle to grip for reduced
user fatigue

EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA

Each tool includes
a convenient
jaw lock & handle
return spring

WH 32852

WH 32850

Heads drop
forged CV
premium tool
steel

WH32854

Tools Meet 10,000 Volt Test Standards Rated
to 1000 Volt ac or 1500 Volt dc

1000volt

WH32850 Inomic Combo Pliers. Insulation According to EN/IEC 60900,

ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually
Tested. DIN ISO 5749 Precision machined forged head. Induction
hardened for longest tool life. Cross hatched flat jaw & deep cut radius
jaws for secure gripping of the work piece. Cutting edges are matched
for precise cutting action. Award winning ergonomic design with head
mounted at 23° angle to grip for reduced user fatigue. Palm side of grip
has molded soft panel for added comfort in prolonged use.
Item
No.	

Cutting Capacity

mm	
180	

Copper AWG
Inch		
7.0	
#6	

WH32850 Z01016180	
WH32852 Inomic Long Nose Pliers

Item
No.	

Pkg.	 lbs.	
1	
.46		

Cutting Capacity

Copper AWG
mm	 Inch		
WH32852 Z01016160	 160	 6.3	
#6	
WH32854 Inomic Diagonal Cutters
Cutting Capacity
Item
Copper AWG
No.	
mm	 Inch		
WH32854 Z01016160	 160	 6.3	
#6	

Pkg.	 lbs.	
1	
.43		

Pkg.	 lbs.	
1	
.41		

1000Volt
WH32859 3 Pc. Insulated Inomic Pliers/Cutters Set
Meets ASTM, EN/IEC, NFPA, CSA, ISO specifications. Three
Award winning ergonomic design with head mounted Holsters
Included
at 23° angle to grip for reduced user fatigue.

Item# WH32859
	 	
Set Includes:	
Inomic Combo Pliers	
		
Inomic Long Nose Pliers			

	 lbs. 1.45
Inomic Diagonal Cutters
Inomic Holster (Includes 3)

Tools Meet
10,000 Volt Test Standards
Rated to 1000Volt ac or 1500 Volt dc
WH91230 Inomic Canvas Holster

Item	
No.	
	WH91230

Width		 Height	
Size		 Size	
lbs.	 pkg.
4.0	 x	 4.5	
.05	 1

Holds
any
Inomic
Pliers

38

Insulated Industrial
Pliers & Cutters

NEW
From W
iha

Tools meet ASTM, IEC, VDE,
EN, NFPA & CSA standards

Induction hardened
jaws and cutters
to 60 HRC

10,000 Volt tested
1000 Volt Rated

Industrial
brushed finish

NEW
Wiha

Long life high
performance
dynamic 60/40 joint

1000volt

NEW
Wiha

Insulated Diagonal Cutters

Cutting Capacity
Copper AWG
mm	 Inch		
225	 9.0	
#4	

Pkg.	 wt.	
1	
.98	

WH329 Insulated Industrial Long Nose Pliers With Cutters.
Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM
F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested.
Drop-forged from special tool steel, cutters additionally induction
hardened (approx. 60 HRC), half-round jaws, serrated gripping surface.
Industrial brushed finish. Ergonomic comfort grip with slip guard.
Cutting Capacity

mm	
160	
200	

Copper AWG
Inch		
6.3	
#10	
8.0	
#8	

Pkg.	 wt.	
1	
.36	
1	
.46	

WH329 Insulated Industrial Diagonal Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested. DIN ISO 5749 Low wear lap
joint, riveted and able to withstand high levels of load. Lightweight action,
clean cutting. Long term cutting is achieved through additional inductive
hardening to approx. 60 HRC. Special tool steel hardened and tempered.
Industrial brushed finish. For soft, medium hard wire & piano wire.

NEW
Wiha

Long life high performance
dynamic 60/40 joint

Design Insulation According to EN/IEC, ASTM, NFPA70E & CSA,
up to 1000 volt. Individually Tested. Deep cut radius conduit
jaws for non-slip handling. Sure grip knurled & cross hatched flat jaw
for non-slip griping. Extra long induction hardened precision matched
cutting edges. Lower crimping jaw accepts most standard non-insulated
electrical connectors. Large head with square anvil surface on each
side. Premium CV tool steel forgings.

Item
No.	
WH32926
	
WH32923
	

1000volt

From

WH32917 Insulated Industrial Lineman’s Pliers “5-In-1” Professional

Item
No.	
WH32917
	

Insulated Long Nose Pliers With Cutters
From

New dynamic joint provides
40% easier cuts & significantly
longer tool life

Two component ergo
cushion grip handles

Insulated Lineman’s Pliers With Crimpers
From

1000V

1000volt

Item
No.	
WH32933
	
WH32929
	

Cutting Capacity
Copper AWG
mm	 Inch		
160	 6.3	
#6	
200	 8.0	
#6	

Pkg.	
1	
1	

wt.	
.64	
.80	

39
39
Insulated Stripping Pliers

NEW
From

Wiha

Insulated Combo Pliers With Dynamic Joint
1000volt

Long life high
performance
dynamic 60/40 joint

NEW
From

Wiha

Insulated Heavy Duty Cable Cutters

NEW
Wiha

Insulated Crimpers
From

Wiha

1000volt

Stripping Capacity
Copper AWG
mm	 Inch		
160	 6.3	
#4 - #28	

Pkg.	 wt.	
1	
.46	

WH32930 Insulated Industrial High Leverage Combination Pliers.
Insulation According to EN/IEC 60900, ASTM F-1505-01, NFPA70E &
CSA,
up to 1000 volt. Individually Tested. DIN ISO 5746
Extra long cutting edge for flat and round cables. Serrated jaws.
Cutting edges additionally induction hardened to approx. 60HRC.
Use for gripping, pulling & holding as well as cutting wires and cables
ranging in hardness from soft to extremely hard. Industrial brushed
finish. Two component soft grip ergonomic handles.

Item
No.	
WH32930
	

Cutting Capacity
Copper AWG
mm	 Inch		
200	 8.0	
#4	

Pkg.	 wt.	
1	
.92	

WH32927 Insulated Industrial Serrated Edge Cable Cutters. Insulation
According to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01,
NFPA70E and CSA,
up to 1000 Volt. Individually Tested. Light,
clean cutting ground precision cutting edges. Durable cutting is achieved
through additional inductive hardening to approx. 60 HRC. Premium
CV tool steel forgings. For cutting of copper & aluminum cables without
crushing. Two component ergo cushion grips for best user comfort.

Item 			
No.	
mm	 Inch	
WH32927
	
200	 8.0	

1000volt

NEW

to VDE 0682/part 201, DIN 7437, EN/IEC 60900, ASTM F-1505-01,
NFPA70E & CSA, 1000 volt rated. Individually Tested.
DIN ISO 5745 Made from Premium CV tool steel forgings. Induction
hardened jaws and cutters to 60 HRC. Industrial brushed finish. Two
component ergo cushion grips for best user comfort. Spring & adjusting
screw, for stripping up to Ø 5mm/#4 Awg.
Item
No.	
	WH32947

1000volt

From

WH32947 Insulated Industrial Stripping Pliers. Insulation According

	
Ø	
20	

mm2	
60	

Pkg.	
1	

lbs.
.78

WH32945
Insulated Industrial Crimping Pliers. Insulation
According to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01,
NFPA70E and CSA,
up to 1000 Volt. Individually Tested.
Semi-circular profiles for secure connection between end sleeve and
conductor. Long life is achieved through additional induction hardening
to 60 HRC. Industrial brushed finish. Two component ergo cushion
grips for best user comfort. Crimps 6 - 30 AWG Connectors.

Item
No.	
WH32945
	

mm	 Inch	 mm2	 AWG	 Pkg.	 wt.	
180	 7.0	 0.25-2.5	 6-30	 1	
.64

40
Wiha Insulated Industrial Tool Sets

NEW
From

Tools meet ASTM,
IEC, VDE, EN,
NFPA & CSA
standards

Wiha

Tool box set
in blow molded tray

Tools meet ASTM,
IEC, VDE, EN,
NFPA & CSA
standards

WH32999 9 Piece Insulated Industrial Pliers & Cutters Set

Insulated pliers & cutters set in a light weight tool box tray.
Item No.		
	
9.0” Lineman’s Pliers	
8.0” High Leverage Combo Pliers
WH32999
	
6.3” Long Nose Pliers	
8.0” Cable Cutters
	
8.0” Long Nose Pliers	
6.3” Stripping Pliers
lbs.	
6.3” Diagonal Cutters	
7.0” Crimping Pliers
6.34	
8.0” Diagonal Cutters		

Wiha

Wiha

1000Volt
WH32981 3 Pc. Insulated Industrial Pliers & Cutters. Insulation

Item No. 	 Insulated Pliers & Cutters
	WH32981
8.0” Combo Pliers, 8.0” Long Pliers, 8.0” Diagonal Cutters
	
lbs. 2.18

NEW
From

From

From

According to VDE 0682/part 201, DIN EN 60900, EN/IEC 60900,
ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested.

1000Volt

NEW

NEW

Wiha

Tools meet ASTM,
IEC, VDE, EN,
NFPA & CSA
standards

In Belt Pack
Pouch

1000Volt
WH32983 5 Pc. Insulated Industrial Diagonal Cutters & Screwdrivers

1000Volt
WH32985 7 Pc. Insulated Industrial Pliers/Cutters & Screwdrivers

Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC
60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt.
Individually Tested.
Item No. 	 Insulated Diagonal Cutters & Screwdrivers
WH32983
	
6.3”/160mm Diagonal Cutter
	
Insulated Divers: Slotted: 3.0, 4.5mm • Phillips: #1, #2
	
lbs. 1.17

Item No. 	 Insulated Pliers/Cutters & Screwdrivers
	WH32985
8.0” Combo Pliers, 6.3” Long Nose, 6.3” Diagonal Cutters
	
Insulated Divers: Slotted: 3.0, 4.5mm • Phillips: #1, #2
	
lbs. 2.30

NEW
From

Wiha

Tools meet ASTM,
IEC, VDE, EN,
NFPA & CSA
standards

1000Volt

WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.

6 Pc. Insulated Industrial Combo Pliers & Screwdrivers
Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC
60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt.
Individually Tested.

WH32984

Item No. 	 Insulated Combination Pliers & Screwdrivers
8.0” Combination Pliers & 8” Long Nose Pliers
	
Divers: Slotted: 3.0, 4.5mm • Phillips: #2 • Square: #2
	
lbs. 2.06

WH32984
	

41
41

Wiha Insulated Industrial Tool Sets
1000Volt
In Roll
Out
Pouch

In Roll
Out
Pouches

NEW
From

Wiha

NEW
From

1000Volt

WH32986 11 Pc. Pliers & Screwdriver Set. Insulation According to
VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01,
NFPA70E,
up to 1000 volt. Individually Tested. In Roll Out Pouch
Item# WH32986
	 	
Set Includes:			
lbs. 3.62	
6.3” Long Nose Pliers		
6.3” Diagonal Cutters 	
8.0” Combination Pliers		
6.3” Stripping Pliers
Insulated Slotted: 3.0, 4.5, 5.5mm
Insulated Phillips: #1, #2			
Insulated Square: #1, #2

In Roll
Out
Pouch

NEW
From

Wiha

1000Volt

WH32987 8 Pc. Pliers & Cutters Set. Insulation According to VDE

0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01,
NFPA70E,
up to 1000 volt. Individually Tested. In Roll Out Pouch
Item# WH32987
	 	
Set Includes:			
lbs. 5.52	 	
6.3” Long Nose Pliers		
6.3” Diagonal Cutters
8.0” Long Nose Pliers		
8.0” H.D. Diagonal Cutters 	
9.0” Lineman’s w/Cutters		
6.3” Stripping Pliers
8.0” Cable Cutters			
7.0” Crimpers

Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature
is between -20 to +70O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.

Wiha

WH32988 22 Pc. Pliers & Cutters Set. Insulation According to VDE
0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01,
NFPA70E,
up to 1000 volt. Individually Tested. In Roll Out Pouches
Item# WH32988
	 	
Set Includes:			
lbs. 5.74	 	
8.0” Long Nose Pliers		
6.3” Diagonal Cutters
9.0” Lineman’s w/Cutters		
8.0” H.D. Diagonal Cutters 	
8.0” Cable Cutters			
6.3” Stripping Pliers
7.0” Crimpers
15 Pc. SlimLine Blade Set includes: Insulated SlimLine Blade Holder
Slotted: 3.0, 4.0, 5.5, 6.5			
Phillips: #1, #2	 	
Xeno: #1, #2
: T8, T10, T15, T20		
Square: #1, #2

NEW
From

Wiha

1000Volt

WH32390 11 Pc. Pliers & Driver Set. Insulation According to VDE
0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA,
up to 1000 volt. Individually Tested. In molded tool box
Item# WH32390
		
Set Includes:		 lbs. 7.5	 	
8.0” Linemans Pliers				 6.3” Long Nose Pliers W/Cutter 	
8.0” Long Nose Pliers W/Cutter		 6.3” Diagonal Cutter
8.0” High Leverage Cutter
Insulated Phillips #0		
Insulated Slotted 3.0mm(1/8”)
Insulated Phillips #1 	 	
Insulated Slotted 4.5mm(3/16”)
Insulated Phillips #2 		
Insulated Slotted 6.5mm(1/4”)

42
Numerical Index by Item Number
Item No. Page

WH 10250	
WH 11625	
WH 11630	
WH 11950	
WH 12326	
WH 12851	
WH 12852	
WH 12853	
WH 12854	
WH 12855	
WH 12856	
WH 12857	
WH 12858	
WH 12859	
WH 13650	
WH 13651	
WH 13652	
WH 13653	
WH 13654	
WH 13655	
WH 13656	
WH 13657	
WH 13658	
WH 13659	
WH 13662	
WH 13663	
WH 13664	
WH 13665	
WH 13666	
WH 13667	
WH 13668	
WH 13669	
WH 13670	
WH 13671	
WH 13672	
WH 13673	
WH 13690	
WH 13691	
WH 13693	
WH 15000	
WH 15003	
WH 15050	
WH 19767	
WH 20006	
WH 20007	
WH 20008	
WH 20009	
WH 20010	
WH 20011	
WH 20012	
WH 20013	
WH 20014	
WH 20015	

37
15
15
15	
14
10	
13	
15	
11	
11	
13	
13	
15	
15	
9
9
9
9	
9	
9	
9	
9	
9	
9	
9	
9	
9	
9	
9	
9	
9	
9	
9
9
9
9
9	
9	
9
8	
8	
8	
15
5	
5	
5	
5	
5	
5	
5	
5	
5	
5	

Item No. Page

WH 20016	
WH 20017	
WH 20018	
WH 20019	
WH 20020	
WH 20022	
WH 20024	
WH 20027	
WH 20030	
WH 20032	
WH 20091	
WH 20093	
WH 20131	
WH 20133	
WH 20135	
WH 20136	
WH 20137	
WH 20138	
WH 20140	
WH 20141	
WH 20142	
WH 20144	
WH 20145	
WH 20146	
WH 20147	
WH 20148	
WH 20149	
WH 20190	
WH 20192	
WH 21008	
WH 21009	
WH 21010	
WH 21011	
WH 21012	
WH 21013	
WH 21014	
WH 21015	
WH 21017	
WH 21019	
WH 21022	
WH 21024	
WH 21027	
WH 21030	
WH 21032	
WH 21040	
WH 21042	
WH 21044	
WH 21046	
WH 21048	
WH 21050	
WH 21052	
WH 21054	
WH 21056	

5	
5	
5	
5	
5
5	
5	
5	
5	
5	
4	
4	
5
5	
5	
5	
5	
5	
5	
5	
5	
5	
5	
5	
5	
5	
5	
4	
4	
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8

Item No. Page

WH 21058	
WH 21060	
WH 21062	
WH 21064	
WH 21066	
WH 21068	
WH 21093	
WH 21094	
WH 21095	
WH 21096	
WH 21208	
WH 21210	
WH 21212	
WH 21213	
WH 21214	
WH 21217	
WH 21219	
WH 21290	
WH 21325	
WH 21327	
WH 21329	
WH 21331	
WH 21333	
WH 21335	
WH 21391	
WH 25511	
WH 28301	
WH 28308	
WH 28309	
WH 28312	
WH 28315	
WH 28317	
WH 28319	
WH 28327	
WH 28329	
WH 28339	
WH 28340	
WH 28341	
WH 28342	
WH 28346	
WH 28347	
WH 28350	
WH 28390	
WH 28391	
WH 28724	
WH 28726	
WH 28727	
WH 28734	
WH 28736	
WH 28737	
WH 28791	
WH 28792	
WH 29006	

8
8
8
8
8
8
7
8
7
8
6	
6	
6	
6
6	
6	
6	
6	
6	
6	
6
6	
6	
6	
6	
26
19
19
19
19
19
19
19
20
20
20
20
20
20
20
20
18
20
20	
18
18
18
18
18
18
18
18
11	

Item No. Page

WH 29009	
WH 29012	
WH 29240	
WH 29250	
WH 30700	
WH 30701	
WH 30746	
WH 30747	
WH 31326	
WH 31327	
WH 31328	
WH 31329	
WH 31330	
WH 31331	
WH 31332	
WH 31333	
WH 31334	
WH 31335	
WH 31336	
WH 31337	
WH 31338	
WH 31339	
WH 31340	
WH 31341	
WH 31342	
WH 31343	
WH 31344	
WH 31345	
WH 31390	
WH 31391	
WH 31394	
WH 31395	
WH 31425	
WH 31428	
WH 31429	
WH 31430	
WH 31431	
WH 31432	
WH 31433	
WH 31434	
WH 31435	
WH 31436	
WH 31437	
WH 31438	
WH 31439	
WH 31491	
WH 31493	
WH 31495	
WH 31496	
WH 31506	
WH 31507	
WH 31508	
WH 31509	

13	
15	
15	
15
26	
26	
21
21
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
10	
11	
11	
11	
11
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
13	
13
12	
12	
12	
12	

Item No. Page

WH 31510	
WH 31511	
WH 31512	
WH 31513	
WH 31514	
WH 31515	
WH 31516	
WH 31517	
WH 31518	
WH 31519	
WH 31520	
WH 31521	
WH 31522	
WH 31524	
WH 31590	
WH 31592	
WH 31595	
WH 31608	
WH 31609	
WH 31610	
WH 31611	
WH 31612	
WH 31613	
WH 31614	
WH 31615	
WH 31616	
WH 31617	
WH 31618	
WH 31619	
WH 31620	
WH 31621	
WH 31622	
WH 31623	
WH 31624	
WH 31626	
WH 31627	
WH 31628	
WH 31630	
WH 31632	
WH 31691	
WH 31703	
WH 31704	
WH 31705	
WH 31707	
WH 31708	
WH 31709	
WH 31710	
WH 31712	
WH 31713	
WH 31714	
WH 31715	
WH 31716	
WH 31718	

12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
12	
13	
13
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14
14
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14	
14

43
43
Item No. Page

WH 31720	
WH 31722	
WH 31790	
WH 31805	
WH 31807	
WH 31809	
WH 31811	
WH 31813	
WH 31815	
WH 31817	
WH 31890	
WH 32005	
WH 32010	
WH 32012	
WH 32015	
WH 32017	
WH 32023	
WH 32024	
WH 32025	
WH 32026	
WH 32027	
WH 32028	
WH 32031	
WH 32034	
WH 32039	
WH 32042	
WH 32045	
WH 32046	
WH 32049	
WH 32052	
WH 32055	
WH 32058	
WH 32090	
WH 32091	
WH 32092	
WH 32093	
WH 32094	
WH 32095	
WH 32100	
WH 32101	
WH 32102	
WH 32103	
WH 32104	
WH 32145	
WH 32146	
WH 32189	
WH 32190	
WH 32196	
WH 32197	
WH 32198	
WH 32206	
WH 32209	
WH 32212	

14
14	
14	
10	
10	
10	
10	
10	
10	
10	
10	
23	
23	
23	
23	
23	
23	
23	
23	
23	
23	
23	
23	
23	
23
23	
23	
21
21
21
21
21
23	
23	
23	
24	
24	
24
23	
23	
23	
23	
23	
21
21
22
24
22
22
22
25	
25	
25	

Item No. Page

WH 32215	
WH 32218	
WH 32221	
WH 32224	
WH 32227	
WH 32230	
WH 32233	
WH 32236	
WH 32255	
WH 32258	
WH 32261	
WH 32264	
WH 32267	
WH 32268	
WH 32270	
WH 32273	
WH 32276	
WH 32278	
WH 32280	
WH 32288	
WH 32291	
WH 32292	
WH 32293	
WH 32294	
WH 32296	
WH 32302	
WH 32303	
WH 32304	
WH 32305	
WH 32306	
WH 32308	
WH 32366	
WH 32390	
WH 32505	
WH 32511	
WH 32516	
WH 32521	
WH 32526	
WH 32531	
WH 32536	
WH 32541	
WH 32546	
WH 32551	
WH 32556	
WH 32561	
WH 32590	
WH 32592	
WH 32650	
WH 32800	
WH 32804	
WH 32806	
WH 32807	
WH 32808	

25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25	
25
25	
25	
25	
25	
25	
24
24
24
24
24
24
24
41
26	
26	
26	
26	
26	
26	
26	
26	
26	
26	
26	
26	
26	
26	
27	
29
36	
36	
36	
36	

Item No. Page

WH 32810	
WH 32814	
WH 32816	
WH 32818	
WH 32820	
WH 32821	
WH 32826	
WH 32828	
WH 32830	
WH 32832	
WH 32834	
WH 32835	
WH 32836	
WH 32838	
WH 32841	
WH 32850	
WH 32852	
WH 32854	
WH 32859	
WH 32860	
WH 32861	
WH 32867	
WH 32868	
WH 32869	
WH 32870	
WH 32871	
WH 32872	
WH 32873	
WH 32874	
WH 32875	
WH 32876	
WH 32877	
WH 32878	
WH 32879	
WH 32888	
WH 32889	
WH 32891	
WH 32892	
WH 32894	
WH 32895	
WH 32896	
WH 32917	
WH 32923	
WH 32926	
WH 32927	
WH 32929	
WH 32930	
WH 32933	
WH 32945	
WH 32947	
WH 32981	
WH 32983	
WH 32984	

36	
34	
34	
34	
34	
34
35
35	
35	
35	
35	
35	
35	
35	
35
37	
37	
37
37	
37	
35	
33
33
33
36	
28	
28	
28
31	
28
30
30	
31
31	
32	
33	
32	
32	
32	
32	
31	
38
38
38
39
38
39
38
39
39
40
40
40

Item No. Page

WH 32985	
WH 32986	
WH 32987	
WH 32988	
WH 32999	
WH 33441	
WH 33443	
WH 33445	
WH 33447	
WH 33481	
WH 33482	
WH 33483	
WH 33485	
WH 33486	
WH 33487	
WH 33490	
WH 33491	
WH 35811	
WH 35812	
WH 35844	
WH 35845	
WH 35890	
WH 35891	
WH 38006	
WH 38007	
WH 38016	
WH 38017	
WH 38018	
WH 38025	
WH 40800	
WH 75205	
WH 75210	
WH 75215	
WH 75220	
WH 75302	
WH 75304	
WH 76208	
WH 76210	
WH 76212	
WH 76215	
WH 76290	
WH 91230	
WH 91256	

40
41
41
41
40
17	
17	
17	
17	
17	
17	
17	
17	
17	
17	
17	
17	
24	
24	
21
21
24	
24
18	
18	
27	
27	
27	
18
15	
16
16
16
16
16
16
5	
5	
5	
5
5
37	
36

Item No. Page

COMPLIANCE TESTING

from

Cold Impact Test

Insulation Test

Catalog Item No. 99919 .D
version - 2/1/12

Subject to change without notice
Material Integrity Test

Puncture Test

Adhesion Test

Flame Resistance Test

Also Available
Wiha / LH Dottie ESD Tools

L.H. Dottie Company
6131 Garfield Avenue
Commerce, CA 90040
tel: 323.725.1000
lhdottie.com

©2012 Willi Hahn Corporation



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2012:01:31 14:52:37-06:00
Creator                         : Adobe InDesign CS4 (6.0.5)
Modify Date                     : 2012:01:31 15:13:16-06:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:01:31 15:13:16-06:00
Creator Tool                    : Adobe InDesign CS4 (6.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 20982 bytes, use -b option to extract)
Instance ID                     : uuid:ebe164bc-dc71-4ff8-abfb-c5753c974a90
Document ID                     : xmp.did:40C4486EFD3DE1119D89ED76C36C3BDC
Original Document ID            : xmp.did:AB7CD0303CE3DE118CFCC7821E1AAA70
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:AB7CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:AC7CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:AD7CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:AE7CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:AF7CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:B07CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:B17CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:B27CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:B37CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:B47CD0303CE3DE118CFCC7821E1AAA70, xmp.iid:4E78A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:4F78A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5078A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5178A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5278A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5378A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5478A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5578A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5678A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5778A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:5878A6EB4CE3DE118CFCC7821E1AAA70, xmp.iid:24F6B06358E3DE118CFCC7821E1AAA70, xmp.iid:25F6B06358E3DE118CFCC7821E1AAA70, xmp.iid:26F6B06358E3DE118CFCC7821E1AAA70, xmp.iid:27F6B06358E3DE118CFCC7821E1AAA70, xmp.iid:28F6B06358E3DE118CFCC7821E1AAA70, xmp.iid:29F6B06358E3DE118CFCC7821E1AAA70, xmp.iid:2AF6B06358E3DE118CFCC7821E1AAA70, xmp.iid:2BF6B06358E3DE118CFCC7821E1AAA70, xmp.iid:2CF6B06358E3DE118CFCC7821E1AAA70, xmp.iid:2DF6B06358E3DE118CFCC7821E1AAA70, xmp.iid:2EF6B06358E3DE118CFCC7821E1AAA70, xmp.iid:E0EB134972E3DE118CFCC7821E1AAA70, xmp.iid:E1EB134972E3DE118CFCC7821E1AAA70, xmp.iid:E2EB134972E3DE118CFCC7821E1AAA70, xmp.iid:E3EB134972E3DE118CFCC7821E1AAA70, xmp.iid:C114D33305E4DE11B5F19DBC958DA714, xmp.iid:C214D33305E4DE11B5F19DBC958DA714, xmp.iid:C314D33305E4DE11B5F19DBC958DA714, xmp.iid:C414D33305E4DE11B5F19DBC958DA714, xmp.iid:C514D33305E4DE11B5F19DBC958DA714, xmp.iid:C614D33305E4DE11B5F19DBC958DA714, xmp.iid:C714D33305E4DE11B5F19DBC958DA714, xmp.iid:C814D33305E4DE11B5F19DBC958DA714, xmp.iid:C914D33305E4DE11B5F19DBC958DA714, xmp.iid:CA14D33305E4DE11B5F19DBC958DA714, xmp.iid:13C95D1926E4DE11B5F19DBC958DA714, xmp.iid:14C95D1926E4DE11B5F19DBC958DA714, xmp.iid:15C95D1926E4DE11B5F19DBC958DA714, xmp.iid:16C95D1926E4DE11B5F19DBC958DA714, xmp.iid:9F1B664D95E5DE119A83FF89B19FE018, xmp.iid:A01B664D95E5DE119A83FF89B19FE018, xmp.iid:BD01492D65F5DE11A0D19A640984FFD4, xmp.iid:E829ABB09D06DF11A5B48417FD0D018D, xmp.iid:A7800348810ADF11AED4D15914653E4D, xmp.iid:0D4F1B22DD0CDF11B0EFDC84CC804489, xmp.iid:0E4F1B22DD0CDF11B0EFDC84CC804489, xmp.iid:0F4F1B22DD0CDF11B0EFDC84CC804489, xmp.iid:104F1B22DD0CDF11B0EFDC84CC804489, xmp.iid:114F1B22DD0CDF11B0EFDC84CC804489, xmp.iid:F49DEACAF40CDF11B0EFDC84CC804489, xmp.iid:FB9DEACAF40CDF11B0EFDC84CC804489, xmp.iid:FC9DEACAF40CDF11B0EFDC84CC804489, xmp.iid:C0C90164FE0CDF11B0EFDC84CC804489, xmp.iid:89F0B874680FDF118696D7C578EA4F60, xmp.iid:8AF0B874680FDF118696D7C578EA4F60, xmp.iid:8BF0B874680FDF118696D7C578EA4F60, xmp.iid:8CF0B874680FDF118696D7C578EA4F60, xmp.iid:8DF0B874680FDF118696D7C578EA4F60, xmp.iid:8EF0B874680FDF118696D7C578EA4F60, xmp.iid:8FF0B874680FDF118696D7C578EA4F60, xmp.iid:90F0B874680FDF118696D7C578EA4F60, xmp.iid:F5359A9D0210DF119DA38005E7297BEB, xmp.iid:F6359A9D0210DF119DA38005E7297BEB, xmp.iid:F9359A9D0210DF119DA38005E7297BEB, xmp.iid:FA359A9D0210DF119DA38005E7297BEB, xmp.iid:FE359A9D0210DF119DA38005E7297BEB, xmp.iid:DE8C901A1110DF119DA38005E7297BEB, xmp.iid:E28C901A1110DF119DA38005E7297BEB, xmp.iid:E38C901A1110DF119DA38005E7297BEB, xmp.iid:E48C901A1110DF119DA38005E7297BEB, xmp.iid:E58C901A1110DF119DA38005E7297BEB, xmp.iid:556ED8691610DF119DA38005E7297BEB, xmp.iid:566ED8691610DF119DA38005E7297BEB, xmp.iid:576ED8691610DF119DA38005E7297BEB, xmp.iid:166875F9CE10DF118F9DBA4AFADED846, xmp.iid:F15BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F25BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F35BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F45BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F55BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F65BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F75BEDEDFF10DF118F9DBA4AFADED846, xmp.iid:F33E653E9811DF1183EEAF82CEDE5C23, xmp.iid:F63E653E9811DF1183EEAF82CEDE5C23, xmp.iid:F73E653E9811DF1183EEAF82CEDE5C23, xmp.iid:F83E653E9811DF1183EEAF82CEDE5C23, xmp.iid:FC3E653E9811DF1183EEAF82CEDE5C23, xmp.iid:868DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:878DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:888DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:898DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:8A8DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:8B8DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:8C8DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:8D8DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:8E8DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:8F8DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:908DF6DEC911DF1183EEAF82CEDE5C23, xmp.iid:52DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:53DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:54DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:55DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:56DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:57DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:58DCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:5ADCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:5BDCCA31CE11DF1183EEAF82CEDE5C23, xmp.iid:9B9AA5166712DF11B3EDB003D5B4E39C, xmp.iid:A09AA5166712DF11B3EDB003D5B4E39C, xmp.iid:A19AA5166712DF11B3EDB003D5B4E39C, xmp.iid:A29AA5166712DF11B3EDB003D5B4E39C, xmp.iid:A39AA5166712DF11B3EDB003D5B4E39C, xmp.iid:A49AA5166712DF11B3EDB003D5B4E39C, xmp.iid:EE9222DC7D12DF11B3EDB003D5B4E39C, xmp.iid:9BBC93116016DF11B5FF80E94D635CEB, xmp.iid:8833E4178016DF11B5FF80E94D635CEB, xmp.iid:8933E4178016DF11B5FF80E94D635CEB, xmp.iid:8B33E4178016DF11B5FF80E94D635CEB, xmp.iid:8C33E4178016DF11B5FF80E94D635CEB, xmp.iid:8D33E4178016DF11B5FF80E94D635CEB, xmp.iid:539CAEA1F517DF11A55BCBA3B1898AAF, xmp.iid:549CAEA1F517DF11A55BCBA3B1898AAF, xmp.iid:559CAEA1F517DF11A55BCBA3B1898AAF, xmp.iid:569CAEA1F517DF11A55BCBA3B1898AAF, xmp.iid:F597FF6B031BDF1195C2BAD4250A3BE4, xmp.iid:F897FF6B031BDF1195C2BAD4250A3BE4, xmp.iid:7621A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:7821A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:7921A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:7A21A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:7B21A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:7C21A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:7D21A2E7371BDF1195C2BAD4250A3BE4, xmp.iid:69F7CD87C91BDF118F479C7D9362883B, xmp.iid:6EF7CD87C91BDF118F479C7D9362883B, xmp.iid:6FF7CD87C91BDF118F479C7D9362883B, xmp.iid:70F7CD87C91BDF118F479C7D9362883B, xmp.iid:D97EBB9EE31BDF118F479C7D9362883B, xmp.iid:DA7EBB9EE31BDF118F479C7D9362883B, xmp.iid:DB7EBB9EE31BDF118F479C7D9362883B, xmp.iid:E17EBB9EE31BDF118F479C7D9362883B, xmp.iid:E27EBB9EE31BDF118F479C7D9362883B, xmp.iid:BBF43F94FD1BDF118F479C7D9362883B, xmp.iid:07128F31A21CDF11A4859DB81D39F236, xmp.iid:09128F31A21CDF11A4859DB81D39F236, xmp.iid:0A128F31A21CDF11A4859DB81D39F236, xmp.iid:F70FCAEC721DDF11A42C9B0A2C9D7D43, xmp.iid:145D94E17E2CDF118DEAAEE15C008892, xmp.iid:AD662C784130DF1190F0E20D0A170207, xmp.iid:AE662C784130DF1190F0E20D0A170207, xmp.iid:AF662C784130DF1190F0E20D0A170207, xmp.iid:B0662C784130DF1190F0E20D0A170207, xmp.iid:6CB505B49032DF11BC44B514DC40FCBA, xmp.iid:6DB505B49032DF11BC44B514DC40FCBA, xmp.iid:6AEA92D7C332DF11BC44B514DC40FCBA, xmp.iid:9B697FC95033DF1190ADED0D0B3DC396, xmp.iid:9D697FC95033DF1190ADED0D0B3DC396, xmp.iid:9E697FC95033DF1190ADED0D0B3DC396, xmp.iid:9F697FC95033DF1190ADED0D0B3DC396, xmp.iid:C917D9A07233DF1190ADED0D0B3DC396, xmp.iid:CE17D9A07233DF1190ADED0D0B3DC396, xmp.iid:388137927B33DF1190ADED0D0B3DC396, xmp.iid:6B42B23BD435DF11A76DC5941655DE6E, xmp.iid:6C42B23BD435DF11A76DC5941655DE6E, xmp.iid:FAD3DEE4E235DF11A76DC5941655DE6E, xmp.iid:FCD3DEE4E235DF11A76DC5941655DE6E, xmp.iid:FDD3DEE4E235DF11A76DC5941655DE6E, xmp.iid:9F8148EA7C36DF118015983876B86F23, xmp.iid:A38148EA7C36DF118015983876B86F23, xmp.iid:A48148EA7C36DF118015983876B86F23, xmp.iid:A58148EA7C36DF118015983876B86F23, xmp.iid:A4BD96918836DF118015983876B86F23, xmp.iid:A5BD96918836DF118015983876B86F23, xmp.iid:A6BD96918836DF118015983876B86F23, xmp.iid:2222E2EA6837DF11B0A59713488FF895, xmp.iid:2322E2EA6837DF11B0A59713488FF895, xmp.iid:2422E2EA6837DF11B0A59713488FF895, xmp.iid:2522E2EA6837DF11B0A59713488FF895, xmp.iid:2622E2EA6837DF11B0A59713488FF895, xmp.iid:8C72AC518137DF11B0A59713488FF895, xmp.iid:3196751A0E38DF11ABACBA87A78819E0, xmp.iid:3296751A0E38DF11ABACBA87A78819E0, xmp.iid:3396751A0E38DF11ABACBA87A78819E0, xmp.iid:3496751A0E38DF11ABACBA87A78819E0, xmp.iid:3696751A0E38DF11ABACBA87A78819E0, xmp.iid:3796751A0E38DF11ABACBA87A78819E0, xmp.iid:05F58808DE43DF1197A599BE715A30D9, xmp.iid:58CD4813FA47DF11A00ED3443FCED1DA, xmp.iid:D157FD27274EDF119125D34CD7625F27, xmp.iid:D257FD27274EDF119125D34CD7625F27, xmp.iid:DAE0FF95324EDF119125D34CD7625F27, xmp.iid:DBE0FF95324EDF119125D34CD7625F27, xmp.iid:2BC033263E4EDF11AE5FD42781AE7CA9, xmp.iid:18D01ACA4359DF118AD8B8525FAED00B, xmp.iid:1AD01ACA4359DF118AD8B8525FAED00B, xmp.iid:1BD01ACA4359DF118AD8B8525FAED00B, xmp.iid:79F8320BDA5DDF11B2A9BD6926D310A1, xmp.iid:7BF8320BDA5DDF11B2A9BD6926D310A1, xmp.iid:7CF8320BDA5DDF11B2A9BD6926D310A1, xmp.iid:331103F9F65DDF11A800BAD7E6F04288, xmp.iid:341103F9F65DDF11A800BAD7E6F04288, xmp.iid:351103F9F65DDF11A800BAD7E6F04288, xmp.iid:361103F9F65DDF11A800BAD7E6F04288, xmp.iid:371103F9F65DDF11A800BAD7E6F04288, xmp.iid:381103F9F65DDF11A800BAD7E6F04288, xmp.iid:391103F9F65DDF11A800BAD7E6F04288, xmp.iid:3A1103F9F65DDF11A800BAD7E6F04288, xmp.iid:3B1103F9F65DDF11A800BAD7E6F04288, xmp.iid:4B0F78A4905EDF119B87A3128DBC4233, xmp.iid:4C0F78A4905EDF119B87A3128DBC4233, xmp.iid:BF95D4AE8162DF11AD1F92A2AB3EF928, xmp.iid:BB9A5F5DA769DF11B355AA936F194691, xmp.iid:BC9A5F5DA769DF11B355AA936F194691, xmp.iid:BD9A5F5DA769DF11B355AA936F194691, xmp.iid:BE9A5F5DA769DF11B355AA936F194691, xmp.iid:BF9A5F5DA769DF11B355AA936F194691, xmp.iid:C09A5F5DA769DF11B355AA936F194691, xmp.iid:12295DDAC969DF11B355AA936F194691, xmp.iid:7F26F67C6A6ADF118BBBA82DAECB2D56, xmp.iid:43F28A4E4E6EDF119964C1815C0142D4, xmp.iid:03199F634679DF11B261D43B6C397CDB, xmp.iid:31A8028A147ADF1190BA93AC9359B2B8, xmp.iid:32A8028A147ADF1190BA93AC9359B2B8, xmp.iid:33A8028A147ADF1190BA93AC9359B2B8, xmp.iid:34A8028A147ADF1190BA93AC9359B2B8, xmp.iid:37A8028A147ADF1190BA93AC9359B2B8, xmp.iid:38A8028A147ADF1190BA93AC9359B2B8, xmp.iid:4C0F4C4F487DDF1194ABC82732E9AF92, xmp.iid:678F0693037EDF11BE78B8F14C443DA0, xmp.iid:A6E5D4F8267EDF118A56F8FB4D5DF7A4, xmp.iid:A7E5D4F8267EDF118A56F8FB4D5DF7A4, xmp.iid:A8E5D4F8267EDF118A56F8FB4D5DF7A4, xmp.iid:A1362C2E387EDF118A56F8FB4D5DF7A4, xmp.iid:A2362C2E387EDF118A56F8FB4D5DF7A4, xmp.iid:A3362C2E387EDF118A56F8FB4D5DF7A4, xmp.iid:3367A888C67EDF11B3BEA8A4295A5813, xmp.iid:3467A888C67EDF11B3BEA8A4295A5813, xmp.iid:AB87D3E8F77EDF11B3BEA8A4295A5813, xmp.iid:AC87D3E8F77EDF11B3BEA8A4295A5813, xmp.iid:FF2F4D746380DF11B3758235B09923FA, xmp.iid:00304D746380DF11B3758235B09923FA, xmp.iid:01304D746380DF11B3758235B09923FA, xmp.iid:02304D746380DF11B3758235B09923FA, xmp.iid:03304D746380DF11B3758235B09923FA, xmp.iid:04304D746380DF11B3758235B09923FA, xmp.iid:05304D746380DF11B3758235B09923FA, xmp.iid:0E35D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:0F35D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1035D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1135D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1235D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1335D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1435D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1535D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:1635D3BFB882DF11B2B1F19BC2F70BC3, xmp.iid:485D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:495D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:4A5D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:4B5D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:4C5D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:4D5D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:4E5D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:4F5D4F9CCE82DF11B2B1F19BC2F70BC3, xmp.iid:2CC26F578483DF1180FDC9A6DC3F7BE3, xmp.iid:B556D94C1D85DF1195829D311C25E2B5, xmp.iid:B656D94C1D85DF1195829D311C25E2B5, xmp.iid:995A08711289DF1191C7FF09EED158E2, xmp.iid:E6143FC0B68DDF11906288AD2B5A603E, xmp.iid:4B5611BD758FDF119FB792761DE6C42F, xmp.iid:4C5611BD758FDF119FB792761DE6C42F, xmp.iid:D8FA4ECDD990DF1199B2C775139D02B9, xmp.iid:2AEA08614493DF1182B5A4A5578B8418, xmp.iid:2BEA08614493DF1182B5A4A5578B8418, xmp.iid:2CEA08614493DF1182B5A4A5578B8418, xmp.iid:D776D59F1494DF119397C0A82BC6CEE8, xmp.iid:D876D59F1494DF119397C0A82BC6CEE8, xmp.iid:D976D59F1494DF119397C0A82BC6CEE8, xmp.iid:3D0BF0B0E794DF118894C4E385A8A715, xmp.iid:3F0BF0B0E794DF118894C4E385A8A715, xmp.iid:400BF0B0E794DF118894C4E385A8A715, xmp.iid:7240EE1A8A96DF118AA4962AD811D91E, xmp.iid:7340EE1A8A96DF118AA4962AD811D91E, xmp.iid:7440EE1A8A96DF118AA4962AD811D91E, xmp.iid:1BD62B0EE398DF11B22285C63782CC08, xmp.iid:1CD62B0EE398DF11B22285C63782CC08, xmp.iid:1DD62B0EE398DF11B22285C63782CC08, xmp.iid:1ED62B0EE398DF11B22285C63782CC08, xmp.iid:8DA9E56FA999DF11BEA2C8AC8364C302, xmp.iid:8EA9E56FA999DF11BEA2C8AC8364C302, xmp.iid:3024BA39709ADF11B301D90061116E34, xmp.iid:E03470EAAFA4DF1191C8A4F62ED6F5F1, xmp.iid:E13470EAAFA4DF1191C8A4F62ED6F5F1, xmp.iid:E53470EAAFA4DF1191C8A4F62ED6F5F1, xmp.iid:E2973C634DA5DF11AC24BC0616BEBCD9, xmp.iid:CC501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:D1501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:D2501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:D3501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:D4501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:D5501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:D6501CE85FA5DF11AC24BC0616BEBCD9, xmp.iid:3B21BE837CA5DF11AC24BC0616BEBCD9, xmp.iid:3C21BE837CA5DF11AC24BC0616BEBCD9, xmp.iid:3D21BE837CA5DF11AC24BC0616BEBCD9, xmp.iid:178A03F016A6DF119FD699BE58304CE1, xmp.iid:188A03F016A6DF119FD699BE58304CE1, xmp.iid:1D8A03F016A6DF119FD699BE58304CE1, xmp.iid:1E8A03F016A6DF119FD699BE58304CE1, xmp.iid:1F8A03F016A6DF119FD699BE58304CE1, xmp.iid:54BD362E2EA6DF119FD699BE58304CE1, xmp.iid:C78B9EF440A6DF119FD699BE58304CE1, xmp.iid:AF1E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B01E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B11E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B21E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B31E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B41E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B51E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B61E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B71E1EAB61A9DF11B932F6BC506880D6, xmp.iid:B81E1EAB61A9DF11B932F6BC506880D6, xmp.iid:467C0EBA13AADF1199919CD752470F7C, xmp.iid:477C0EBA13AADF1199919CD752470F7C, xmp.iid:487C0EBA13AADF1199919CD752470F7C, xmp.iid:497C0EBA13AADF1199919CD752470F7C, xmp.iid:4A7C0EBA13AADF1199919CD752470F7C, xmp.iid:4B7C0EBA13AADF1199919CD752470F7C, xmp.iid:4C7C0EBA13AADF1199919CD752470F7C, xmp.iid:5E9D207FE7B5DF11BCB7843970E4CAFE, xmp.iid:5F9D207FE7B5DF11BCB7843970E4CAFE, xmp.iid:083EBB1405BDDF11A541D2C6F60BD1F8, xmp.iid:093EBB1405BDDF11A541D2C6F60BD1F8, xmp.iid:AE60316053BFDF119984C3BF270B9B8B, xmp.iid:0AA3C02E00C0DF119C78C8F69254B3F3, xmp.iid:8727740BE2C0DF11A1C88880950ADFF6, xmp.iid:CE61DE3065C6DF11A64F81E579661755, xmp.iid:34C5BC264FD1DF11A945CC75ADAC0107, xmp.iid:35C5BC264FD1DF11A945CC75ADAC0107, xmp.iid:38C5BC264FD1DF11A945CC75ADAC0107, xmp.iid:ED131ADE1DD6DF11AD5C966BDED8F824, xmp.iid:EE131ADE1DD6DF11AD5C966BDED8F824, xmp.iid:EF131ADE1DD6DF11AD5C966BDED8F824, xmp.iid:F0131ADE1DD6DF11AD5C966BDED8F824, xmp.iid:53A048AB64D8DF11B44EA96137719535, xmp.iid:54A048AB64D8DF11B44EA96137719535, xmp.iid:55A048AB64D8DF11B44EA96137719535, xmp.iid:56A048AB64D8DF11B44EA96137719535, xmp.iid:58A048AB64D8DF11B44EA96137719535, xmp.iid:0A12BBCF91D8DF11AB7FAF2CE327D4A0, xmp.iid:51A62981BDDADF11B493B63E18B48D8B, xmp.iid:52A62981BDDADF11B493B63E18B48D8B, xmp.iid:53A62981BDDADF11B493B63E18B48D8B, xmp.iid:54A62981BDDADF11B493B63E18B48D8B, xmp.iid:55A62981BDDADF11B493B63E18B48D8B, xmp.iid:57A62981BDDADF11B493B63E18B48D8B, xmp.iid:A9B57934CFDADF11B493B63E18B48D8B, xmp.iid:ACB57934CFDADF11B493B63E18B48D8B, xmp.iid:D7999897F6DDDF11B9C7C07C8E4A1312, xmp.iid:D8999897F6DDDF11B9C7C07C8E4A1312, xmp.iid:1F4B99E44DE7DF118C39CC48D782F3E8, xmp.iid:AE05772509ECDF118758D058E09F2D28, xmp.iid:B005772509ECDF118758D058E09F2D28, xmp.iid:866CCCA4D8ECDF118185D77A1C1AD26D, xmp.iid:886CCCA4D8ECDF118185D77A1C1AD26D, xmp.iid:896CCCA4D8ECDF118185D77A1C1AD26D, xmp.iid:F9213C5C9CEDDF118763F4E75556950C, xmp.iid:FA213C5C9CEDDF118763F4E75556950C, xmp.iid:FC213C5C9CEDDF118763F4E75556950C, xmp.iid:FD213C5C9CEDDF118763F4E75556950C, xmp.iid:9D62415369EEDF11B8A4A47B14974ED9, xmp.iid:A062415369EEDF11B8A4A47B14974ED9, xmp.iid:63A8BC2F62F6DF11B022DFC138323377, xmp.iid:64A8BC2F62F6DF11B022DFC138323377, xmp.iid:A0B1910009F7DF11ADBECF9B22B300F8, xmp.iid:A1B1910009F7DF11ADBECF9B22B300F8, xmp.iid:A2B1910009F7DF11ADBECF9B22B300F8, xmp.iid:6B79556703F8DF11AC8CEE223D729366, xmp.iid:6C79556703F8DF11AC8CEE223D729366, xmp.iid:1125F5058EFCDF11BC41AB7BD8412B5B, xmp.iid:AB30AAF8A2FCDF11BC41AB7BD8412B5B, xmp.iid:AD30AAF8A2FCDF11BC41AB7BD8412B5B, xmp.iid:AE30AAF8A2FCDF11BC41AB7BD8412B5B, xmp.iid:AF30AAF8A2FCDF11BC41AB7BD8412B5B, xmp.iid:B030AAF8A2FCDF11BC41AB7BD8412B5B, xmp.iid:B130AAF8A2FCDF11BC41AB7BD8412B5B, xmp.iid:FFCC40D958FDDF11A202FFB7D5CFE037, xmp.iid:00CD40D958FDDF11A202FFB7D5CFE037, xmp.iid:01CD40D958FDDF11A202FFB7D5CFE037, xmp.iid:02CD40D958FDDF11A202FFB7D5CFE037, xmp.iid:03CD40D958FDDF11A202FFB7D5CFE037, xmp.iid:04CD40D958FDDF11A202FFB7D5CFE037, xmp.iid:1E1DD38D66FDDF11A202FFB7D5CFE037, xmp.iid:221DD38D66FDDF11A202FFB7D5CFE037, xmp.iid:231DD38D66FDDF11A202FFB7D5CFE037, xmp.iid:241DD38D66FDDF11A202FFB7D5CFE037, xmp.iid:85D9B1F24701E0119958F4ABBBA47846, xmp.iid:5D9E2BDCDE02E011B0B3B263DE5FFD87, xmp.iid:144E9E59A403E0119865B76C7D352A21, xmp.iid:154E9E59A403E0119865B76C7D352A21, xmp.iid:B52641347404E011ABDE8712C127D174, xmp.iid:B62641347404E011ABDE8712C127D174, xmp.iid:71A9EBAFD406E011A511C1C0FC80B824, xmp.iid:C3A90AC71D09E0118F29A1EF7C3C379E, xmp.iid:C7A90AC71D09E0118F29A1EF7C3C379E, xmp.iid:1C1F8F7D9412E011A0A1D6240DF0B8D6, xmp.iid:1D1F8F7D9412E011A0A1D6240DF0B8D6, xmp.iid:89B0514D2314E0118379CE713E1F29AF, xmp.iid:8AB0514D2314E0118379CE713E1F29AF, xmp.iid:8BB0514D2314E0118379CE713E1F29AF, xmp.iid:788C52B10D18E01186D8E7BEEFDBBDF3, xmp.iid:798C52B10D18E01186D8E7BEEFDBBDF3, xmp.iid:F7DADE872618E011BD1DBBBD168ECE0C, xmp.iid:8E15B0C48F1AE0118AB2EAA902DFC14B, xmp.iid:4D7F7C05B91CE01183BE88B07289259B, xmp.iid:4E7F7C05B91CE01183BE88B07289259B, xmp.iid:4F7F7C05B91CE01183BE88B07289259B, xmp.iid:507F7C05B91CE01183BE88B07289259B, xmp.iid:AC24FD7C1C1FE011A2BBF182DBA6B184, xmp.iid:AD24FD7C1C1FE011A2BBF182DBA6B184, xmp.iid:AE24FD7C1C1FE011A2BBF182DBA6B184, xmp.iid:AF24FD7C1C1FE011A2BBF182DBA6B184, xmp.iid:B024FD7C1C1FE011A2BBF182DBA6B184, xmp.iid:B224FD7C1C1FE011A2BBF182DBA6B184, xmp.iid:84AF3992401FE011A2BBF182DBA6B184, xmp.iid:85AF3992401FE011A2BBF182DBA6B184, xmp.iid:86AF3992401FE011A2BBF182DBA6B184, xmp.iid:87AF3992401FE011A2BBF182DBA6B184, xmp.iid:7F335404ED1FE01190A5D49B575FE19F, xmp.iid:B06E89500F20E01190A5D49B575FE19F, xmp.iid:B16E89500F20E01190A5D49B575FE19F, xmp.iid:B26E89500F20E01190A5D49B575FE19F, xmp.iid:BC710E233723E011BC0288BB422C7E83, xmp.iid:BD710E233723E011BC0288BB422C7E83, xmp.iid:C0710E233723E011BC0288BB422C7E83, xmp.iid:C1710E233723E011BC0288BB422C7E83, xmp.iid:C2710E233723E011BC0288BB422C7E83, xmp.iid:C3710E233723E011BC0288BB422C7E83, xmp.iid:C4710E233723E011BC0288BB422C7E83, xmp.iid:CD816146DC23E0118D9EEF4A1262402B, xmp.iid:D4816146DC23E0118D9EEF4A1262402B, xmp.iid:D5816146DC23E0118D9EEF4A1262402B, xmp.iid:D6816146DC23E0118D9EEF4A1262402B, xmp.iid:9CD50356FC23E0118D9EEF4A1262402B, xmp.iid:9DD50356FC23E0118D9EEF4A1262402B, xmp.iid:9ED50356FC23E0118D9EEF4A1262402B, xmp.iid:01281E979F28E011A290C6D1F4DB8BB9, xmp.iid:2ABC781EEB2AE011B27FEFC4DD9708D6, xmp.iid:2A81BDA5FB2EE011B8E8B8C74E567B93, xmp.iid:2B81BDA5FB2EE011B8E8B8C74E567B93, xmp.iid:2C81BDA5FB2EE011B8E8B8C74E567B93, xmp.iid:87C289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:88C289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:89C289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:8AC289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:8BC289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:8CC289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:8DC289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:8EC289AC9E2FE0118659EB7A3B7DA1BE, xmp.iid:3E052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:3F052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:42052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:43052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:44052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:45052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:47052A1FBC2FE0118659EB7A3B7DA1BE, xmp.iid:E8897A68CA2FE0118659EB7A3B7DA1BE, xmp.iid:5CC052166130E011BFB2AEA325187346, xmp.iid:CA0F16818A33E011B102EEEBAA33F28E, xmp.iid:EFD29B034338E011897EE72C39588417, xmp.iid:F0D29B034338E011897EE72C39588417, xmp.iid:F1D29B034338E011897EE72C39588417, xmp.iid:F2D29B034338E011897EE72C39588417, xmp.iid:F4D29B034338E011897EE72C39588417, xmp.iid:F5D29B034338E011897EE72C39588417, xmp.iid:F6D29B034338E011897EE72C39588417, xmp.iid:F3223C831039E0118449F5239EB18FFE, xmp.iid:F4223C831039E0118449F5239EB18FFE, xmp.iid:F7223C831039E0118449F5239EB18FFE, xmp.iid:BFD9E33B1D39E01197A8EF9621368E43, xmp.iid:5BEE917FCE39E01187ED9E645CA43B7A, xmp.iid:83E29875F739E01187ED9E645CA43B7A, xmp.iid:507D73DC7946E011B1BEA7A1A286EDB3, xmp.iid:DF0AB3598949E011B9D1BF4BC823A2A5, xmp.iid:E70AB3598949E011B9D1BF4BC823A2A5, xmp.iid:CECB025D544AE0119191E6B44701EAFC, xmp.iid:707F46B87B4AE0119191E6B44701EAFC, xmp.iid:BC42A52C254BE011926ABA79F4AF83EF, xmp.iid:C5119E12235AE011886C8144A6B6530D, xmp.iid:C6119E12235AE011886C8144A6B6530D, xmp.iid:C7119E12235AE011886C8144A6B6530D, xmp.iid:3223F7DC0A65E011A07CE388A0E6D409, xmp.iid:3323F7DC0A65E011A07CE388A0E6D409, xmp.iid:3423F7DC0A65E011A07CE388A0E6D409, xmp.iid:FA33C1183D65E011A07CE388A0E6D409, xmp.iid:FB33C1183D65E011A07CE388A0E6D409, xmp.iid:FC33C1183D65E011A07CE388A0E6D409, xmp.iid:FD33C1183D65E011A07CE388A0E6D409, xmp.iid:FE33C1183D65E011A07CE388A0E6D409, xmp.iid:FF33C1183D65E011A07CE388A0E6D409, xmp.iid:0034C1183D65E011A07CE388A0E6D409, xmp.iid:4D0ADA03D165E0119F4196FD86CA2CB5, xmp.iid:4E0ADA03D165E0119F4196FD86CA2CB5, xmp.iid:4F0ADA03D165E0119F4196FD86CA2CB5, xmp.iid:500ADA03D165E0119F4196FD86CA2CB5, xmp.iid:510ADA03D165E0119F4196FD86CA2CB5, xmp.iid:520ADA03D165E0119F4196FD86CA2CB5, xmp.iid:BD8D72CEB166E011BFA3ED39F1CC0BD5, xmp.iid:E21D8EE0CF66E011BFA3ED39F1CC0BD5, xmp.iid:E31D8EE0CF66E011BFA3ED39F1CC0BD5, xmp.iid:E51D8EE0CF66E011BFA3ED39F1CC0BD5, xmp.iid:DE7C55434D6BE01192D1925D870EA3D5, xmp.iid:DF7C55434D6BE01192D1925D870EA3D5, xmp.iid:E07C55434D6BE01192D1925D870EA3D5, xmp.iid:E17C55434D6BE01192D1925D870EA3D5, xmp.iid:E27C55434D6BE01192D1925D870EA3D5, xmp.iid:E57C55434D6BE01192D1925D870EA3D5, xmp.iid:67D1673B726FE011A1E7C846B9B5EEB9, xmp.iid:68D1673B726FE011A1E7C846B9B5EEB9, xmp.iid:16B6B71B8576E011A945E588CC7809CB, xmp.iid:F9AE5F28E777E011ADF1D14AEA4BBC93, xmp.iid:2297E68EE57BE0118018A28FAFDC66D4, xmp.iid:2397E68EE57BE0118018A28FAFDC66D4, xmp.iid:A287AFB9BC7CE0119AD78C7C6D9C4B2C, xmp.iid:A387AFB9BC7CE0119AD78C7C6D9C4B2C, xmp.iid:DE59B09E717DE011B52C9FB8B61A58EB, xmp.iid:E559B09E717DE011B52C9FB8B61A58EB, xmp.iid:4F5A9655F57FE011B41FE8B08317C238, xmp.iid:505A9655F57FE011B41FE8B08317C238, xmp.iid:7371BD189380E011B2D88F4C288828E2, xmp.iid:7471BD189380E011B2D88F4C288828E2, xmp.iid:7571BD189380E011B2D88F4C288828E2, xmp.iid:7671BD189380E011B2D88F4C288828E2, xmp.iid:7771BD189380E011B2D88F4C288828E2, xmp.iid:7871BD189380E011B2D88F4C288828E2, xmp.iid:7971BD189380E011B2D88F4C288828E2, xmp.iid:7A71BD189380E011B2D88F4C288828E2, xmp.iid:7B71BD189380E011B2D88F4C288828E2, xmp.iid:7C71BD189380E011B2D88F4C288828E2, xmp.iid:E20C6B0EB780E011B2D88F4C288828E2, xmp.iid:E30C6B0EB780E011B2D88F4C288828E2, xmp.iid:E40C6B0EB780E011B2D88F4C288828E2, xmp.iid:E50C6B0EB780E011B2D88F4C288828E2, xmp.iid:E60C6B0EB780E011B2D88F4C288828E2, xmp.iid:E70C6B0EB780E011B2D88F4C288828E2, xmp.iid:E80C6B0EB780E011B2D88F4C288828E2, xmp.iid:E90C6B0EB780E011B2D88F4C288828E2, xmp.iid:6D4F605A5A85E011800896998B1E6AB1, xmp.iid:549F24551A86E0118C7AA93ADB3684F1, xmp.iid:559F24551A86E0118C7AA93ADB3684F1, xmp.iid:D0CD2C5CD486E0118F90CE6BB6B00578, xmp.iid:676279179987E011A757EA2928E66D7D, xmp.iid:686279179987E011A757EA2928E66D7D, xmp.iid:696279179987E011A757EA2928E66D7D, xmp.iid:6C6279179987E011A757EA2928E66D7D, xmp.iid:6D6279179987E011A757EA2928E66D7D, xmp.iid:39C0A62E7A8CE01192DAB027AFFABEA8, xmp.iid:BA9ACD281F8DE011922D85866A5E2730, xmp.iid:BF9ACD281F8DE011922D85866A5E2730, xmp.iid:C09ACD281F8DE011922D85866A5E2730, xmp.iid:C19ACD281F8DE011922D85866A5E2730, xmp.iid:C29ACD281F8DE011922D85866A5E2730, xmp.iid:419285E7508DE011922D85866A5E2730, xmp.iid:9103E58EE78DE0118B59BA8BF1FC7B9C, xmp.iid:9203E58EE78DE0118B59BA8BF1FC7B9C, xmp.iid:9303E58EE78DE0118B59BA8BF1FC7B9C, xmp.iid:9403E58EE78DE0118B59BA8BF1FC7B9C, xmp.iid:9503E58EE78DE0118B59BA8BF1FC7B9C, xmp.iid:A4277B185F90E011AAB8DB96DD217146, xmp.iid:8AAB38780B91E011BF8B974043F70E22, xmp.iid:8BAB38780B91E011BF8B974043F70E22, xmp.iid:8CAB38780B91E011BF8B974043F70E22, xmp.iid:8DAB38780B91E011BF8B974043F70E22, xmp.iid:8EAB38780B91E011BF8B974043F70E22, xmp.iid:CB47DBEA2791E011BF8B974043F70E22, xmp.iid:CD47DBEA2791E011BF8B974043F70E22, xmp.iid:CE47DBEA2791E011BF8B974043F70E22, xmp.iid:CF47DBEA2791E011BF8B974043F70E22, xmp.iid:9AE4F427CE91E0118174BA668D435EA0, xmp.iid:9DE4F427CE91E0118174BA668D435EA0, xmp.iid:4941A04BE591E0118174BA668D435EA0, xmp.iid:FEFA54EE9892E011A7CEBA623E3F229C, xmp.iid:81E2F8839396E01183E0D1B6B2DBDBC9, xmp.iid:DEBADB3B5C97E0119EE49A96A3417829, xmp.iid:DFBADB3B5C97E0119EE49A96A3417829, xmp.iid:E0BADB3B5C97E0119EE49A96A3417829, xmp.iid:616FEC293098E011998EEA75413FB24C, xmp.iid:626FEC293098E011998EEA75413FB24C, xmp.iid:636FEC293098E011998EEA75413FB24C, xmp.iid:646FEC293098E011998EEA75413FB24C, xmp.iid:981A0D5EFC98E011A666C396E0FB063D, xmp.iid:9A1A0D5EFC98E011A666C396E0FB063D, xmp.iid:EB22021B53A2E0119298DF624EB048C7, xmp.iid:EE22021B53A2E0119298DF624EB048C7, xmp.iid:F022021B53A2E0119298DF624EB048C7, xmp.iid:F122021B53A2E0119298DF624EB048C7, xmp.iid:F222021B53A2E0119298DF624EB048C7, xmp.iid:53D954C371A9E0118A56E674941EA026, xmp.iid:58D954C371A9E0118A56E674941EA026, xmp.iid:47B612AD1FAEE011A571C22377528876, xmp.iid:6B62DDAF07AFE011A79882564C0C68E0, xmp.iid:95036B6E41B1E011A22AA585EF2E9613, xmp.iid:96036B6E41B1E011A22AA585EF2E9613, xmp.iid:97036B6E41B1E011A22AA585EF2E9613, xmp.iid:98036B6E41B1E011A22AA585EF2E9613, xmp.iid:99036B6E41B1E011A22AA585EF2E9613, xmp.iid:9A036B6E41B1E011A22AA585EF2E9613, xmp.iid:9B036B6E41B1E011A22AA585EF2E9613, xmp.iid:9C036B6E41B1E011A22AA585EF2E9613, xmp.iid:9D036B6E41B1E011A22AA585EF2E9613, xmp.iid:9E036B6E41B1E011A22AA585EF2E9613, xmp.iid:9451B9B459B1E011A22AA585EF2E9613, xmp.iid:9551B9B459B1E011A22AA585EF2E9613, xmp.iid:9651B9B459B1E011A22AA585EF2E9613, xmp.iid:9751B9B459B1E011A22AA585EF2E9613, xmp.iid:9851B9B459B1E011A22AA585EF2E9613, xmp.iid:9951B9B459B1E011A22AA585EF2E9613, xmp.iid:9A51B9B459B1E011A22AA585EF2E9613, xmp.iid:9B51B9B459B1E011A22AA585EF2E9613, xmp.iid:9C51B9B459B1E011A22AA585EF2E9613, xmp.iid:9D51B9B459B1E011A22AA585EF2E9613, xmp.iid:9E51B9B459B1E011A22AA585EF2E9613, xmp.iid:580043D529B2E0119A94B2883EE27CEF, xmp.iid:590043D529B2E0119A94B2883EE27CEF, xmp.iid:5A0043D529B2E0119A94B2883EE27CEF, xmp.iid:5B0043D529B2E0119A94B2883EE27CEF, xmp.iid:5C0043D529B2E0119A94B2883EE27CEF, xmp.iid:5D0043D529B2E0119A94B2883EE27CEF, xmp.iid:5E0043D529B2E0119A94B2883EE27CEF, xmp.iid:5F0043D529B2E0119A94B2883EE27CEF, xmp.iid:600043D529B2E0119A94B2883EE27CEF, xmp.iid:707AD7BF3EB2E0119A94B2883EE27CEF, xmp.iid:3D8E5EC9FFB2E011B00ACE5D7DFD46CA, xmp.iid:756FCED1AEB3E011BCE7C3220197B509, xmp.iid:766FCED1AEB3E011BCE7C3220197B509, xmp.iid:776FCED1AEB3E011BCE7C3220197B509, xmp.iid:786FCED1AEB3E011BCE7C3220197B509, xmp.iid:017DC1B462B8E0118ECAAB2712F3C7EB, xmp.iid:077DC1B462B8E0118ECAAB2712F3C7EB, xmp.iid:E1D533683CB9E011A80CD96D90B1986D, xmp.iid:E2D533683CB9E011A80CD96D90B1986D, xmp.iid:FC6641D06BC3E011BA39C86CA098306A, xmp.iid:FD6641D06BC3E011BA39C86CA098306A, xmp.iid:FE6641D06BC3E011BA39C86CA098306A, xmp.iid:8B3A7812E6C4E011982E9EB19CEBB83B, xmp.iid:8C3A7812E6C4E011982E9EB19CEBB83B, xmp.iid:8E3A7812E6C4E011982E9EB19CEBB83B, xmp.iid:903A7812E6C4E011982E9EB19CEBB83B, xmp.iid:913A7812E6C4E011982E9EB19CEBB83B, xmp.iid:AB5BBC8EDDCCE0118C918FF3E670E7BD, xmp.iid:AC5BBC8EDDCCE0118C918FF3E670E7BD, xmp.iid:EF2084BAA7CDE011A44FF56EBCC96952, xmp.iid:F02084BAA7CDE011A44FF56EBCC96952, xmp.iid:F12084BAA7CDE011A44FF56EBCC96952, xmp.iid:F22084BAA7CDE011A44FF56EBCC96952, xmp.iid:3CA28EE355CEE011A9ECB8DFD2B97010, xmp.iid:2040E4D358CEE011A9ECB8DFD2B97010, xmp.iid:2140E4D358CEE011A9ECB8DFD2B97010, xmp.iid:2240E4D358CEE011A9ECB8DFD2B97010, xmp.iid:6836A425A1DFE011A874944FF4025270, xmp.iid:6936A425A1DFE011A874944FF4025270, xmp.iid:6A36A425A1DFE011A874944FF4025270, xmp.iid:643C99A6AEDFE011A874944FF4025270, xmp.iid:653C99A6AEDFE011A874944FF4025270, xmp.iid:673C99A6AEDFE011A874944FF4025270, xmp.iid:E17CFB148BE3E0119EF38F8CB963211F, xmp.iid:E27CFB148BE3E0119EF38F8CB963211F, xmp.iid:E67CFB148BE3E0119EF38F8CB963211F, xmp.iid:E97CFB148BE3E0119EF38F8CB963211F, xmp.iid:D1C52F426AEBE011841AE24F47CA612F, xmp.iid:5160D0CBABF5E0119936F1E6C8D5126D, xmp.iid:F3721B8760F6E0118C5DA83B3DA65ED6, xmp.iid:F4721B8760F6E0118C5DA83B3DA65ED6, xmp.iid:F5721B8760F6E0118C5DA83B3DA65ED6, xmp.iid:9AD917C1CFFFE0118613FD3CF96729DE, xmp.iid:AE412298E7FFE0118613FD3CF96729DE, xmp.iid:3ABA50B8EEFFE0118613FD3CF96729DE, xmp.iid:3BBA50B8EEFFE0118613FD3CF96729DE, xmp.iid:D4DEF2D0A000E111807DC23CE19FBFF1, xmp.iid:AB6EED4E7501E11194E6901046EDF9ED, xmp.iid:D912EC65E806E111B024AEB4EB0DF489, xmp.iid:DA12EC65E806E111B024AEB4EB0DF489, xmp.iid:51C80083440AE11194F39E514DC320F2, xmp.iid:B785ECFE6210E111B554D51D43C013E8, xmp.iid:6750B8021712E111ACB7867BD115AEDB, xmp.iid:25F108BD1215E111ABCCA7D62D9904B7, xmp.iid:946860D0D219E111BE6787B18F1E9A9A, xmp.iid:966860D0D219E111BE6787B18F1E9A9A, xmp.iid:5E334352FC19E111B159F5C0F6E6FCFF, xmp.iid:5F334352FC19E111B159F5C0F6E6FCFF, xmp.iid:60334352FC19E111B159F5C0F6E6FCFF, xmp.iid:61334352FC19E111B159F5C0F6E6FCFF, xmp.iid:62334352FC19E111B159F5C0F6E6FCFF, xmp.iid:63334352FC19E111B159F5C0F6E6FCFF, xmp.iid:CEBEE6E0991AE111BBC9F1DA1BFA91BB, xmp.iid:E2DD2EA8B11AE111BBC9F1DA1BFA91BB, xmp.iid:29EC3F05101DE1119147FCB410BB7A6B, xmp.iid:2AEC3F05101DE1119147FCB410BB7A6B, xmp.iid:DDACE5EF4D1FE11195118E568B255C6F, xmp.iid:DEACE5EF4D1FE11195118E568B255C6F, xmp.iid:DFACE5EF4D1FE11195118E568B255C6F, xmp.iid:FC85D4C2D520E111BAB8DED2A9293C6E, xmp.iid:FD85D4C2D520E111BAB8DED2A9293C6E, xmp.iid:FF85D4C2D520E111BAB8DED2A9293C6E, xmp.iid:0086D4C2D520E111BAB8DED2A9293C6E, xmp.iid:0186D4C2D520E111BAB8DED2A9293C6E, xmp.iid:0286D4C2D520E111BAB8DED2A9293C6E, xmp.iid:0386D4C2D520E111BAB8DED2A9293C6E, xmp.iid:4063D66EB221E1119613F2D22DC5F920, xmp.iid:077F51D58022E111B1F9DA126E823939, xmp.iid:860CC3DB6526E11195EB977F4E52705F, xmp.iid:1B95D02CAD2CE111A328E9B927BE9F9D, xmp.iid:1E95D02CAD2CE111A328E9B927BE9F9D, xmp.iid:1F95D02CAD2CE111A328E9B927BE9F9D, xmp.iid:488636F8C837E111B9C3B92358044468, xmp.iid:0CB0588C7438E1118F66D6D083F8053D, xmp.iid:3FC4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:40C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:41C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:42C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:43C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:44C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:45C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:47C4486EFD3DE1119D89ED76C36C3BDC, xmp.iid:6D919614103EE111B9909846451B09FB, xmp.iid:6E919614103EE111B9909846451B09FB, xmp.iid:6F919614103EE111B9909846451B09FB, xmp.iid:70919614103EE111B9909846451B09FB, xmp.iid:71919614103EE111B9909846451B09FB, xmp.iid:497B2B0F1F41E111B12A87B0753499F8, xmp.iid:4A7B2B0F1F41E111B12A87B0753499F8, xmp.iid:4B7B2B0F1F41E111B12A87B0753499F8, xmp.iid:4C7B2B0F1F41E111B12A87B0753499F8, xmp.iid:4D7B2B0F1F41E111B12A87B0753499F8, xmp.iid:507B2B0F1F41E111B12A87B0753499F8, xmp.iid:7E882CD0F641E1118AA4C0758ABAE593, xmp.iid:31CB0B157643E11192BF98AA085C70F4, xmp.iid:32CB0B157643E11192BF98AA085C70F4, xmp.iid:33CB0B157643E11192BF98AA085C70F4, xmp.iid:34CB0B157643E11192BF98AA085C70F4, xmp.iid:7A09BFF4DD45E111B3798913EA7043B3, xmp.iid:7B09BFF4DD45E111B3798913EA7043B3, xmp.iid:7C09BFF4DD45E111B3798913EA7043B3, xmp.iid:7E09BFF4DD45E111B3798913EA7043B3, xmp.iid:D39981FA9746E111B605A49FADB638EF, xmp.iid:D49981FA9746E111B605A49FADB638EF, xmp.iid:8228AF73A346E1119D3FBD941B955C22, xmp.iid:8328AF73A346E1119D3FBD941B955C22, xmp.iid:8828AF73A346E1119D3FBD941B955C22, xmp.iid:8928AF73A346E1119D3FBD941B955C22, xmp.iid:8A28AF73A346E1119D3FBD941B955C22, xmp.iid:8B28AF73A346E1119D3FBD941B955C22, xmp.iid:733D7FAECE46E1119D3FBD941B955C22, xmp.iid:73C40FA57147E1119AF58AD32A0BD18B, xmp.iid:74C40FA57147E1119AF58AD32A0BD18B, xmp.iid:75C40FA57147E1119AF58AD32A0BD18B, xmp.iid:76C40FA57147E1119AF58AD32A0BD18B, xmp.iid:77C40FA57147E1119AF58AD32A0BD18B, xmp.iid:78C40FA57147E1119AF58AD32A0BD18B, xmp.iid:79C40FA57147E1119AF58AD32A0BD18B, xmp.iid:7BC40FA57147E1119AF58AD32A0BD18B, xmp.iid:7CC40FA57147E1119AF58AD32A0BD18B, xmp.iid:08E82CAC8E47E1119AF58AD32A0BD18B, xmp.iid:09E82CAC8E47E1119AF58AD32A0BD18B, xmp.iid:0AE82CAC8E47E1119AF58AD32A0BD18B, xmp.iid:0555F3EBF248E1119965ACE11C719C33, xmp.iid:7810A72C4F4BE1118D1E9190C82A2A28, xmp.iid:7910A72C4F4BE1118D1E9190C82A2A28, xmp.iid:5634C3BB814BE1118D1E9190C82A2A28, xmp.iid:BEC86C4B164CE1118971D81E54810EF6, xmp.iid:BFC86C4B164CE1118971D81E54810EF6, xmp.iid:C0C86C4B164CE1118971D81E54810EF6, xmp.iid:C3C86C4B164CE1118971D81E54810EF6, xmp.iid:C4C86C4B164CE1118971D81E54810EF6
History When                    : 2009:12:07 08:24:12-06:00, 2009:12:07 09:28:56-06:00, 2009:12:07 09:28:56-06:00, 2009:12:07 09:30:48-06:00, 2009:12:07 09:37-06:00, 2009:12:07 09:45:59-06:00, 2009:12:07 09:56:27-06:00, 2009:12:07 10:07:53-06:00, 2009:12:07 10:10:38-06:00, 2009:12:07 10:11:37-06:00, 2009:12:07 10:23:57-06:00, 2009:12:07 10:25:15-06:00, 2009:12:07 10:25:45-06:00, 2009:12:07 10:31:23-06:00, 2009:12:07 10:36:49-06:00, 2009:12:07 10:41:31-06:00, 2009:12:07 10:44:07-06:00, 2009:12:07 11:04:38-06:00, 2009:12:07 11:40:52-06:00, 2009:12:07 11:42:54-06:00, 2009:12:07 11:43:47-06:00, 2009:12:07 11:46:03-06:00, 2009:12:07 11:46:30-06:00, 2009:12:07 13:45:39-06:00, 2009:12:07 13:47:50-06:00, 2009:12:07 14:13:59-06:00, 2009:12:07 14:23:10-06:00, 2009:12:07 14:26:52-06:00, 2009:12:07 14:32:26-06:00, 2009:12:07 14:49:04-06:00, 2009:12:07 14:49:57-06:00, 2009:12:07 14:50:52-06:00, 2009:12:07 14:51:25-06:00, 2009:12:07 14:53:34-06:00, 2009:12:07 14:54:01-06:00, 2009:12:07 14:58:46-06:00, 2009:12:08 08:23:06-06:00, 2009:12:08 08:24:58-06:00, 2009:12:08 08:43:43-06:00, 2009:12:08 09:13:15-06:00, 2009:12:08 11:48:50-06:00, 2009:12:08 11:57:17-06:00, 2009:12:08 12:05:55-06:00, 2009:12:08 12:08:07-06:00, 2009:12:08 12:13:17-06:00, 2009:12:08 12:13:44-06:00, 2009:12:08 12:18:35-06:00, 2009:12:08 12:39:02-06:00, 2009:12:08 13:01:27-06:00, 2009:12:08 13:01:51-06:00, 2009:12:10 08:07:07-06:00, 2009:12:10 08:09:27-06:00, 2009:12:30 12:20:30-06:00, 2010:01:21 09:06:04-06:00, 2010:01:26 08:26:19-06:00, 2010:01:29 08:34:28-06:00, 2010:01:29 08:35:29-06:00, 2010:01:29 10:21:14-06:00, 2010:01:29 10:31-06:00, 2010:01:29 10:32:25-06:00, 2010:01:29 10:40:09-06:00, 2010:01:29 11:39:42-06:00, 2010:01:29 11:43:49-06:00, 2010:01:29 12:52:06-06:00, 2010:02:01 13:58:26-06:00, 2010:02:01 14:02:13-06:00, 2010:02:01 14:07:27-06:00, 2010:02:01 14:10:56-06:00, 2010:02:01 14:12:50-06:00, 2010:02:01 14:13:33-06:00, 2010:02:01 14:27:17-06:00, 2010:02:01 14:37:54-06:00, 2010:02:02 07:55:26-06:00, 2010:02:02 07:55:27-06:00, 2010:02:02 09:21:20-06:00, 2010:02:02 09:26:32-06:00, 2010:02:02 09:34-06:00, 2010:02:02 09:40:40-06:00, 2010:02:02 09:47:01-06:00, 2010:02:02 09:59:33-06:00, 2010:02:02 10:00:12-06:00, 2010:02:02 10:00:12-06:00, 2010:02:02 12:13:16-06:00, 2010:02:02 12:16:40-06:00, 2010:02:02 12:17:06-06:00, 2010:02:03 13:12:31-06:00, 2010:02:03 14:08:43-06:00, 2010:02:03 14:13:25-06:00, 2010:02:03 14:15:11-06:00, 2010:02:03 14:15:11-06:00, 2010:02:03 14:17:34-06:00, 2010:02:03 14:51:33-06:00, 2010:02:03 14:55:09-06:00, 2010:02:04 08:19:02-06:00, 2010:02:04 10:48:27-06:00, 2010:02:04 11:01:09-06:00, 2010:02:04 13:04:16-06:00, 2010:02:04 14:12:04-06:00, 2010:02:04 14:14:17-06:00, 2010:02:04 14:17:41-06:00, 2010:02:04 14:19:47-06:00, 2010:02:04 14:22:14-06:00, 2010:02:04 14:24:31-06:00, 2010:02:04 14:29:21-06:00, 2010:02:04 14:30:32-06:00, 2010:02:04 14:31:32-06:00, 2010:02:04 14:38:02-06:00, 2010:02:04 14:41:17-06:00, 2010:02:04 14:43:03-06:00, 2010:02:04 14:45:14-06:00, 2010:02:04 14:46:56-06:00, 2010:02:04 14:48:16-06:00, 2010:02:04 14:48:38-06:00, 2010:02:04 14:50:55-06:00, 2010:02:04 14:54:39-06:00, 2010:02:04 14:56:54-06:00, 2010:02:04 14:58:40-06:00, 2010:02:04 15:00:35-06:00, 2010:02:05 08:59:41-06:00, 2010:02:05 11:04:56-06:00, 2010:02:05 11:06:39-06:00, 2010:02:05 11:07:29-06:00, 2010:02:05 11:08:38-06:00, 2010:02:05 11:33:56-06:00, 2010:02:05 11:42:41-06:00, 2010:02:10 13:59:44-06:00, 2010:02:10 14:13:33-06:00, 2010:02:10 14:40:57-06:00, 2010:02:10 14:57:22-06:00, 2010:02:10 15:02:35-06:00, 2010:02:10 15:03:41-06:00, 2010:02:12 10:42:39-06:00, 2010:02:12 11:07:58-06:00, 2010:02:12 14:32:16-06:00, 2010:02:12 14:43:22-06:00, 2010:02:16 13:49:26-06:00, 2010:02:16 14:12:21-06:00, 2010:02:16 14:14:36-06:00, 2010:02:16 14:25:58-06:00, 2010:02:16 14:28:46-06:00, 2010:02:16 14:31:43-06:00, 2010:02:16 14:32:50-06:00, 2010:02:16 14:39:15-06:00, 2010:02:16 14:44:25-06:00, 2010:02:17 07:37:02-06:00, 2010:02:17 08:29:17-06:00, 2010:02:17 08:38:52-06:00, 2010:02:17 10:24:42-06:00, 2010:02:17 11:16:05-06:00, 2010:02:17 11:17:38-06:00, 2010:02:17 11:31:11-06:00, 2010:02:17 12:28:05-06:00, 2010:02:17 13:49:33-06:00, 2010:02:17 14:05:54-06:00, 2010:02:18 09:27:58-06:00, 2010:02:18 09:29:24-06:00, 2010:02:18 09:33:25-06:00, 2010:02:19 13:31:43-06:00, 2010:03:10 14:52:32-06:00, 2010:03:15 09:45:59-05:00, 2010:03:15 09:48:31-05:00, 2010:03:15 10:03:31-05:00, 2010:03:15 10:28:20-05:00, 2010:03:18 08:31:30-05:00, 2010:03:18 08:35:03-05:00, 2010:03:18 14:24:16-05:00, 2010:03:19 09:37:06-05:00, 2010:03:19 10:36:07-05:00, 2010:03:19 10:37:21-05:00, 2010:03:19 10:39:21-05:00, 2010:03:19 11:49:45-05:00, 2010:03:19 12:17:41-05:00, 2010:03:19 12:19:27-05:00, 2010:03:22 13:42:18-05:00, 2010:03:22 13:42:19-05:00, 2010:03:22 14:43:57-05:00, 2010:03:22 14:50:48-05:00, 2010:03:22 15:01:19-05:00, 2010:03:23 08:06:37-05:00, 2010:03:23 08:45:28-05:00, 2010:03:23 09:03:44-05:00, 2010:03:23 09:05:08-05:00, 2010:03:23 09:33:49-05:00, 2010:03:23 09:34:44-05:00, 2010:03:23 09:36:21-05:00, 2010:03:24 14:42:53-05:00, 2010:03:24 14:50:09-05:00, 2010:03:24 14:59:47-05:00, 2010:03:24 15:03:59-05:00, 2010:03:24 15:05:08-05:00, 2010:03:24 15:10:40-05:00, 2010:03:25 07:58:26-05:00, 2010:03:25 08:18:46-05:00, 2010:03:25 08:23:16-05:00, 2010:03:25 08:29:58-05:00, 2010:03:25 10:24:27-05:00, 2010:03:25 13:04:56-05:00, 2010:04:09 11:06:47-05:00, 2010:04:14 14:15:23-05:00, 2010:04:22 12:08:13-05:00, 2010:04:22 12:12:37-05:00, 2010:04:22 12:15:01-05:00, 2010:04:22 12:18:21-05:00, 2010:04:22 13:41:26-05:00, 2010:05:06 14:35:30-05:00, 2010:05:06 14:44:26-05:00, 2010:05:06 14:44:31-05:00, 2010:05:12 11:28:53-05:00, 2010:05:12 13:24:35-05:00, 2010:05:12 13:28:03-05:00, 2010:05:12 13:48:36-05:00, 2010:05:12 13:54:41-05:00, 2010:05:12 14:01:19-05:00, 2010:05:12 14:26:38-05:00, 2010:05:12 14:35:45-05:00, 2010:05:12 14:45:55-05:00, 2010:05:12 14:52:27-05:00, 2010:05:12 14:53:51-05:00, 2010:05:12 15:04:41-05:00, 2010:05:13 08:08:37-05:00, 2010:05:13 08:20:30-05:00, 2010:05:18 09:32:28-05:00, 2010:05:27 12:17:35-05:00, 2010:05:27 12:19:12-05:00, 2010:05:27 12:20:14-05:00, 2010:05:27 13:45:01-05:00, 2010:05:27 13:57:35-05:00, 2010:05:27 14:01:23-05:00, 2010:05:27 14:55:51-05:00, 2010:05:28 10:05:43-05:00, 2010:06:02 10:15:40-05:00, 2010:06:16 07:55:07-05:00, 2010:06:17 08:41:44-05:00, 2010:06:17 08:57:56-05:00, 2010:06:17 10:04:24-05:00, 2010:06:17 10:50:18-05:00, 2010:06:17 11:01:37-05:00, 2010:06:17 11:04:09-05:00, 2010:06:21 10:22:02-05:00, 2010:06:22 08:39:26-05:00, 2010:06:22 14:35:20-05:00, 2010:06:22 14:35:22-05:00, 2010:06:22 14:46:55-05:00, 2010:06:22 14:56-05:00, 2010:06:22 14:58:14-05:00, 2010:06:22 14:59:45-05:00, 2010:06:23 07:55-05:00, 2010:06:23 09:58:43-05:00, 2010:06:23 13:54:47-05:00, 2010:06:23 13:59:29-05:00, 2010:06:25 09:10:48-05:00, 2010:06:25 10:42:26-05:00, 2010:06:25 11:34:18-05:00, 2010:06:25 11:50:08-05:00, 2010:06:25 12:28:17-05:00, 2010:06:25 12:42:58-05:00, 2010:06:25 14:23:55-05:00, 2010:06:28 09:25:21-05:00, 2010:06:28 09:37:34-05:00, 2010:06:28 09:52:30-05:00, 2010:06:28 10:06:07-05:00, 2010:06:28 10:12:56-05:00, 2010:06:28 10:35:09-05:00, 2010:06:28 10:35:26-05:00, 2010:06:28 10:36:35-05:00, 2010:06:28 10:38:19-05:00, 2010:06:28 11:02:54-05:00, 2010:06:28 11:06:20-05:00, 2010:06:28 11:23:38-05:00, 2010:06:28 11:42:06-05:00, 2010:06:28 11:48:43-05:00, 2010:06:28 12:11:45-05:00, 2010:06:28 12:17:38-05:00, 2010:06:28 14:46:23-05:00, 2010:06:29 08:43:47-05:00, 2010:07:01 14:21:03-05:00, 2010:07:01 14:39:48-05:00, 2010:07:06 11:07:28-05:00, 2010:07:12 08:10:42-05:00, 2010:07:14 13:31:48-05:00, 2010:07:14 13:32-05:00, 2010:07:16 08:14:37-05:00, 2010:07:19 09:46:13-05:00, 2010:07:19 11:47:14-05:00, 2010:07:19 11:55:43-05:00, 2010:07:20 10:36:54-05:00, 2010:07:20 11:39:03-05:00, 2010:07:20 11:40:22-05:00, 2010:07:21 11:47:47-05:00, 2010:07:21 14:45:52-05:00, 2010:07:21 14:56:58-05:00, 2010:07:23 14:32:42-05:00, 2010:07:23 14:43:23-05:00, 2010:07:23 14:54:52-05:00, 2010:07:26 13:24:40-05:00, 2010:07:26 13:46:05-05:00, 2010:07:26 14:11:50-05:00, 2010:07:26 14:23:05-05:00, 2010:07:27 13:04:45-05:00, 2010:07:27 13:13:23-05:00, 2010:07:28 13:42:31-05:00, 2010:08:10 13:48:50-05:00, 2010:08:10 13:51:30-05:00, 2010:08:10 14:20:58-05:00, 2010:08:11 10:39:01-05:00, 2010:08:11 10:48:37-05:00, 2010:08:11 12:05:45-05:00, 2010:08:11 12:27:02-05:00, 2010:08:11 13:59:20-05:00, 2010:08:11 14:03:35-05:00, 2010:08:11 14:05:09-05:00, 2010:08:11 14:07:57-05:00, 2010:08:11 14:13:24-05:00, 2010:08:11 14:44:17-05:00, 2010:08:11 14:56:12-05:00, 2010:08:12 08:38:49-05:00, 2010:08:12 08:40:27-05:00, 2010:08:12 11:06:44-05:00, 2010:08:12 11:07:55-05:00, 2010:08:12 11:11:34-05:00, 2010:08:12 12:49:53-05:00, 2010:08:12 15:16:24-05:00, 2010:08:16 13:11:19-05:00, 2010:08:16 13:49:18-05:00, 2010:08:16 13:55:50-05:00, 2010:08:16 13:57:31-05:00, 2010:08:16 14:04:10-05:00, 2010:08:16 14:24:23-05:00, 2010:08:16 14:26:15-05:00, 2010:08:16 14:32:03-05:00, 2010:08:16 14:51:11-05:00, 2010:08:16 14:58:10-05:00, 2010:08:17 10:25:54-05:00, 2010:08:17 10:36:53-05:00, 2010:08:17 10:44:10-05:00, 2010:08:17 12:32:04-05:00, 2010:08:17 13:31:55-05:00, 2010:08:17 13:33:37-05:00, 2010:08:17 14:19:42-05:00, 2010:09:01 14:31:23-05:00, 2010:09:01 14:44:13-05:00, 2010:09:10 12:58:56-05:00, 2010:09:10 13:12:44-05:00, 2010:09:13 14:27:02-05:00, 2010:09:14 08:23:12-05:00, 2010:09:15 14:36:01-05:00, 2010:09:22 11:22:49-05:00, 2010:10:06 10:07:08-05:00, 2010:10:06 10:26:25-05:00, 2010:10:06 11:39:13-05:00, 2010:10:12 13:35:45-05:00, 2010:10:12 13:41:38-05:00, 2010:10:12 13:47:30-05:00, 2010:10:12 14:27:59-05:00, 2010:10:15 09:37:28-05:00, 2010:10:15 09:38:56-05:00, 2010:10:15 09:40:38-05:00, 2010:10:15 09:43:06-05:00, 2010:10:15 09:53:06-05:00, 2010:10:15 14:25:32-05:00, 2010:10:18 09:12:04-05:00, 2010:10:18 09:13:28-05:00, 2010:10:18 09:59:46-05:00, 2010:10:18 10:00:52-05:00, 2010:10:18 10:01:57-05:00, 2010:10:18 10:11:41-05:00, 2010:10:18 11:43:41-05:00, 2010:10:18 13:41:09-05:00, 2010:10:22 13:58:54-05:00, 2010:10:22 13:59:24-05:00, 2010:11:03 13:06:24-05:00, 2010:11:09 08:38:07-06:00, 2010:11:09 09:01:44-06:00, 2010:11:10 09:32:56-06:00, 2010:11:10 09:37:51-06:00, 2010:11:10 09:57:26-06:00, 2010:11:11 08:02:46-06:00, 2010:11:11 08:19:28-06:00, 2010:11:11 08:34:58-06:00, 2010:11:11 09:38:02-06:00, 2010:11:12 10:44:29-06:00, 2010:11:12 11:00:25-06:00, 2010:11:22 12:16:33-06:00, 2010:11:22 12:17:09-06:00, 2010:11:23 08:43:01-06:00, 2010:11:23 09:02:12-06:00, 2010:11:23 09:05:55-06:00, 2010:11:24 13:45:34-06:00, 2010:11:24 13:47:44-06:00, 2010:11:30 10:50:13-06:00, 2010:11:30 10:57:53-06:00, 2010:11:30 11:18:42-06:00, 2010:11:30 12:32:07-06:00, 2010:11:30 13:32:45-06:00, 2010:11:30 14:27:42-06:00, 2010:11:30 14:52:24-06:00, 2010:12:01 08:47:36-06:00, 2010:12:01 09:27:29-06:00, 2010:12:01 09:38:32-06:00, 2010:12:01 09:58:32-06:00, 2010:12:01 10:03:03-06:00, 2010:12:01 10:13:38-06:00, 2010:12:01 10:17:55-06:00, 2010:12:01 11:05:31-06:00, 2010:12:01 11:23:52-06:00, 2010:12:01 11:28:24-06:00, 2010:12:06 08:48:54-06:00, 2010:12:08 10:39-06:00, 2010:12:09 10:49:48-06:00, 2010:12:09 10:58:31-06:00, 2010:12:10 09:43:16-06:00, 2010:12:10 09:48:54-06:00, 2010:12:13 10:18:57-06:00, 2010:12:16 08:07:11-06:00, 2010:12:16 08:26:02-06:00, 2010:12:28 09:09:39-06:00, 2010:12:28 09:13:24-06:00, 2010:12:30 08:44:27-06:00, 2010:12:30 08:44:27-06:00, 2010:12:30 08:45:47-06:00, 2011:01:04 08:19:50-06:00, 2011:01:04 08:24:17-06:00, 2011:01:04 11:50:02-06:00, 2011:01:07 13:21:54-06:00, 2011:01:10 06:56:20-06:00, 2011:01:10 06:57:20-06:00, 2011:01:10 07:07:37-06:00, 2011:01:10 07:28:04-06:00, 2011:01:13 08:56:09-06:00, 2011:01:13 09:36:24-06:00, 2011:01:13 10:13:44-06:00, 2011:01:13 10:14:18-06:00, 2011:01:13 11:07:28-06:00, 2011:01:13 11:38:21-06:00, 2011:01:13 12:11:41-06:00, 2011:01:13 12:18:06-06:00, 2011:01:13 14:43:54-06:00, 2011:01:13 14:44:21-06:00, 2011:01:14 10:14:38-06:00, 2011:01:14 12:51:36-06:00, 2011:01:14 13:03:22-06:00, 2011:01:14 13:04:11-06:00, 2011:01:18 13:14:13-06:00, 2011:01:18 13:23:25-06:00, 2011:01:18 14:13:12-06:00, 2011:01:18 14:16:18-06:00, 2011:01:18 14:19:11-06:00, 2011:01:18 14:28:45-06:00, 2011:01:18 14:45:04-06:00, 2011:01:19 08:56:20-06:00, 2011:01:19 12:13:44-06:00, 2011:01:19 12:25:10-06:00, 2011:01:19 12:45:10-06:00, 2011:01:19 12:45:50-06:00, 2011:01:19 12:46:17-06:00, 2011:01:19 12:46:27-06:00, 2011:01:25 10:34:48-06:00, 2011:01:28 08:32:48-06:00, 2011:02:02 14:00:16-06:00, 2011:02:02 14:12:30-06:00, 2011:02:02 14:20:21-06:00, 2011:02:03 09:48:12-06:00, 2011:02:03 10:13:12-06:00, 2011:02:03 10:29:53-06:00, 2011:02:03 10:33:50-06:00, 2011:02:03 11:15:26-06:00, 2011:02:03 11:30:24-06:00, 2011:02:03 11:31:20-06:00, 2011:02:03 11:32:53-06:00, 2011:02:03 11:36:24-06:00, 2011:02:03 12:04:59-06:00, 2011:02:03 12:39:13-06:00, 2011:02:03 12:39:21-06:00, 2011:02:03 12:41:26-06:00, 2011:02:03 12:43:40-06:00, 2011:02:03 12:51:32-06:00, 2011:02:03 13:31:35-06:00, 2011:02:04 07:47:52-06:00, 2011:02:08 08:42:57-06:00, 2011:02:14 08:02:09-06:00, 2011:02:14 08:07:11-06:00, 2011:02:14 08:12:54-06:00, 2011:02:14 10:18:12-06:00, 2011:02:14 11:14:35-06:00, 2011:02:14 11:16:15-06:00, 2011:02:14 11:19:49-06:00, 2011:02:15 08:33:10-06:00, 2011:02:15 08:33:42-06:00, 2011:02:15 08:47:27-06:00, 2011:02:15 11:11:36-06:00, 2011:02:16 11:37:05-06:00, 2011:02:16 14:04:29-06:00, 2011:03:04 14:23:23-06:00, 2011:03:08 07:38:28-06:00, 2011:03:08 08:47:50-06:00, 2011:03:09 09:15:37-06:00, 2011:03:09 12:33:25-06:00, 2011:03:10 11:22:30-06:00, 2011:03:29 13:24:27-05:00, 2011:03:29 13:26:11-05:00, 2011:03:29 13:32:10-05:00, 2011:04:12 14:00:22-05:00, 2011:04:12 14:06:09-05:00, 2011:04:12 14:36:39-05:00, 2011:04:12 14:43:10-05:00, 2011:04:12 14:43:48-05:00, 2011:04:12 14:46:46-05:00, 2011:04:12 14:50:11-05:00, 2011:04:12 15:11:08-05:00, 2011:04:12 15:13:55-05:00, 2011:04:12 15:14:44-05:00, 2011:04:13 08:43:57-05:00, 2011:04:13 08:44:42-05:00, 2011:04:13 08:46:42-05:00, 2011:04:13 08:59:05-05:00, 2011:04:13 09:01:04-05:00, 2011:04:13 09:41:38-05:00, 2011:04:14 13:34:42-05:00, 2011:04:14 14:46:23-05:00, 2011:04:14 14:46:43-05:00, 2011:04:14 14:52:02-05:00, 2011:04:20 09:22:16-05:00, 2011:04:20 09:23:29-05:00, 2011:04:20 10:05:22-05:00, 2011:04:20 11:03:22-05:00, 2011:04:20 11:03:27-05:00, 2011:04:20 13:07:14-05:00, 2011:04:25 14:28:43-05:00, 2011:04:25 14:31:14-05:00, 2011:05:04 14:31:28-05:00, 2011:05:06 09:34:11-05:00, 2011:05:11 11:01:48-05:00, 2011:05:11 11:29:58-05:00, 2011:05:12 12:24:43-05:00, 2011:05:12 14:24:16-05:00, 2011:05:13 09:59:36-05:00, 2011:05:13 11:47:23-05:00, 2011:05:16 14:47:30-05:00, 2011:05:16 14:47:31-05:00, 2011:05:17 09:36:48-05:00, 2011:05:17 09:42:50-05:00, 2011:05:17 09:58:55-05:00, 2011:05:17 10:15:33-05:00, 2011:05:17 10:32:22-05:00, 2011:05:17 12:14:23-05:00, 2011:05:17 12:17:12-05:00, 2011:05:17 13:18:32-05:00, 2011:05:17 13:28:32-05:00, 2011:05:17 13:30:09-05:00, 2011:05:17 13:54:13-05:00, 2011:05:17 13:57:13-05:00, 2011:05:17 14:00:48-05:00, 2011:05:17 14:01:38-05:00, 2011:05:17 14:11:44-05:00, 2011:05:17 14:13:35-05:00, 2011:05:17 14:15:03-05:00, 2011:05:17 14:38:47-05:00, 2011:05:23 13:08:34-05:00, 2011:05:24 14:43:52-05:00, 2011:05:24 14:46:19-05:00, 2011:05:25 11:51:37-05:00, 2011:05:26 09:07:44-05:00, 2011:05:26 09:09:11-05:00, 2011:05:26 12:55:53-05:00, 2011:05:26 14:13:17-05:00, 2011:05:26 14:13:24-05:00, 2011:06:01 14:32:27-05:00, 2011:06:02 08:49:50-05:00, 2011:06:02 12:13:56-05:00, 2011:06:02 12:51:07-05:00, 2011:06:02 13:46:26-05:00, 2011:06:02 14:44:12-05:00, 2011:06:02 14:55:31-05:00, 2011:06:03 08:44:09-05:00, 2011:06:03 11:40:01-05:00, 2011:06:03 13:22:43-05:00, 2011:06:03 13:40:24-05:00, 2011:06:03 14:29:29-05:00, 2011:06:06 14:57:10-05:00, 2011:06:07 10:56:35-05:00, 2011:06:07 11:11-05:00, 2011:06:07 11:26:41-05:00, 2011:06:07 11:53:16-05:00, 2011:06:07 11:55:24-05:00, 2011:06:07 13:18:48-05:00, 2011:06:07 14:23:11-05:00, 2011:06:07 14:29:17-05:00, 2011:06:07 14:59:57-05:00, 2011:06:08 09:38:26-05:00, 2011:06:08 10:32:48-05:00, 2011:06:08 12:08:13-05:00, 2011:06:09 08:18:51-05:00, 2011:06:14 09:35:13-05:00, 2011:06:15 13:51:49-05:00, 2011:06:15 13:52:54-05:00, 2011:06:15 13:53:40-05:00, 2011:06:16 10:49:05-05:00, 2011:06:16 11:46:05-05:00, 2011:06:16 14:09:43-05:00, 2011:06:16 14:19:42-05:00, 2011:06:17 13:05:21-05:00, 2011:06:17 13:21:01-05:00, 2011:06:29 09:41:40-05:00, 2011:06:29 11:27:26-05:00, 2011:06:29 11:59:02-05:00, 2011:06:29 11:59:43-05:00, 2011:06:29 13:16:57-05:00, 2011:07:08 09:51:29-05:00, 2011:07:08 10:22:29-05:00, 2011:07:14 12:15:20-05:00, 2011:07:15 13:44:05-05:00, 2011:07:18 08:25:40-05:00, 2011:07:18 09:22:44-05:00, 2011:07:18 09:47:26-05:00, 2011:07:18 09:53:26-05:00, 2011:07:18 09:55:31-05:00, 2011:07:18 10:51:07-05:00, 2011:07:18 10:57:20-05:00, 2011:07:18 10:59:53-05:00, 2011:07:18 11:10:11-05:00, 2011:07:18 11:18:46-05:00, 2011:07:18 11:19:26-05:00, 2011:07:18 13:17:35-05:00, 2011:07:18 13:17:49-05:00, 2011:07:18 14:11:10-05:00, 2011:07:18 14:28:10-05:00, 2011:07:18 14:39:57-05:00, 2011:07:18 14:41:02-05:00, 2011:07:18 14:43:28-05:00, 2011:07:18 14:45:50-05:00, 2011:07:18 14:46:50-05:00, 2011:07:18 14:51:18-05:00, 2011:07:19 12:37:43-05:00, 2011:07:19 12:43:32-05:00, 2011:07:19 12:50-05:00, 2011:07:19 13:56:02-05:00, 2011:07:19 14:05:53-05:00, 2011:07:19 14:07:18-05:00, 2011:07:19 14:09:10-05:00, 2011:07:19 14:09:31-05:00, 2011:07:19 14:10:07-05:00, 2011:07:19 14:38:59-05:00, 2011:07:20 13:40:48-05:00, 2011:07:21 10:33:44-05:00, 2011:07:21 13:53:25-05:00, 2011:07:21 13:59:31-05:00, 2011:07:21 14:07:39-05:00, 2011:07:27 10:11:30-05:00, 2011:07:27 13:18:20-05:00, 2011:07:28 13:21:45-05:00, 2011:07:28 13:28:36-05:00, 2011:08:10 12:51:19-05:00, 2011:08:10 13:32:56-05:00, 2011:08:10 13:43:07-05:00, 2011:08:12 08:22:05-05:00, 2011:08:12 08:34:12-05:00, 2011:08:12 08:36:27-05:00, 2011:08:12 08:43:25-05:00, 2011:08:12 10:00:19-05:00, 2011:08:22 14:21:56-05:00, 2011:08:22 15:01:51-05:00, 2011:08:23 11:48:29-05:00, 2011:08:23 13:03:15-05:00, 2011:08:23 14:38:23-05:00, 2011:08:23 14:57:11-05:00, 2011:08:24 08:38:54-05:00, 2011:08:24 10:48:19-05:00, 2011:08:24 10:49:36-05:00, 2011:08:24 12:18:36-05:00, 2011:09:15 10:08:36-05:00, 2011:09:15 10:09-05:00, 2011:09:15 10:14:35-05:00, 2011:09:15 11:12:49-05:00, 2011:09:15 11:27:35-05:00, 2011:09:15 11:50:20-05:00, 2011:09:20 08:18:51-05:00, 2011:09:20 08:21:06-05:00, 2011:09:20 08:33:41-05:00, 2011:09:20 08:35:35-05:00, 2011:09:30 10:15:20-05:00, 2011:10:13 14:49:46-05:00, 2011:10:14 07:32:06-05:00, 2011:10:14 07:59:46-05:00, 2011:10:14 08:16:35-05:00, 2011:10:26 09:58:28-05:00, 2011:10:26 10:51:15-05:00, 2011:10:26 11:37:39-05:00, 2011:10:26 11:39:50-05:00, 2011:10:27 12:07:03-05:00, 2011:10:28 09:58:34-05:00, 2011:11:04 08:25-05:00, 2011:11:04 08:34:38-05:00, 2011:11:08 14:01:56-06:00, 2011:11:16 08:55:16-06:00, 2011:11:18 12:56:23-06:00, 2011:11:22 08:53:25-06:00, 2011:11:28 10:47:40-06:00, 2011:11:28 13:59:29-06:00, 2011:11:28 14:05:39-06:00, 2011:11:28 14:08:23-06:00, 2011:11:28 14:20-06:00, 2011:11:28 14:28:14-06:00, 2011:11:28 14:29:44-06:00, 2011:11:28 14:47:04-06:00, 2011:11:29 10:34:20-06:00, 2011:11:29 11:43:33-06:00, 2011:12:02 13:45:04-06:00, 2011:12:02 13:46:05-06:00, 2011:12:05 09:51:33-06:00, 2011:12:05 10:29:51-06:00, 2011:12:05 11:23:40-06:00, 2011:12:07 08:28:11-06:00, 2011:12:07 10:10:47-06:00, 2011:12:07 12:31:58-06:00, 2011:12:07 12:32:40-06:00, 2011:12:07 13:00:09-06:00, 2011:12:07 13:12:42-06:00, 2011:12:07 13:19:35-06:00, 2011:12:08 14:49:32-06:00, 2011:12:09 10:14:12-06:00, 2011:12:14 09:29:37-06:00, 2011:12:22 08:56:49-06:00, 2011:12:22 09:31:17-06:00, 2011:12:22 09:44:53-06:00, 2012:01:05 14:51:02-06:00, 2012:01:06 11:12:50-06:00, 2012:01:13 09:44:08-06:00, 2012:01:13 09:44:09-06:00, 2012:01:13 10:08:56-06:00, 2012:01:13 10:32:53-06:00, 2012:01:13 10:35:18-06:00, 2012:01:13 10:35:29-06:00, 2012:01:13 10:38:15-06:00, 2012:01:13 11:32:14-06:00, 2012:01:13 11:57:38-06:00, 2012:01:13 13:04:38-06:00, 2012:01:13 14:26:01-06:00, 2012:01:13 14:47:18-06:00, 2012:01:13 14:47:23-06:00, 2012:01:17 09:22:25-06:00, 2012:01:17 09:27:13-06:00, 2012:01:17 10:52:25-06:00, 2012:01:17 11:12:25-06:00, 2012:01:17 12:17:33-06:00, 2012:01:17 14:58:18-06:00, 2012:01:18 11:06:50-06:00, 2012:01:20 13:58:43-06:00, 2012:01:20 14:29:32-06:00, 2012:01:20 14:32:09-06:00, 2012:01:20 14:51:23-06:00, 2012:01:23 11:38:30-06:00, 2012:01:23 12:43:15-06:00, 2012:01:23 13:30:53-06:00, 2012:01:23 14:26:43-06:00, 2012:01:24 08:30:35-06:00, 2012:01:24 08:34:06-06:00, 2012:01:24 09:52:43-06:00, 2012:01:24 10:13:14-06:00, 2012:01:24 12:40:30-06:00, 2012:01:24 12:58:20-06:00, 2012:01:24 14:39:47-06:00, 2012:01:24 14:46:31-06:00, 2012:01:24 15:02:10-06:00, 2012:01:25 10:28:42-06:00, 2012:01:25 11:10:50-06:00, 2012:01:25 11:32:15-06:00, 2012:01:25 11:35:59-06:00, 2012:01:25 11:59:56-06:00, 2012:01:25 12:41:49-06:00, 2012:01:25 12:47:35-06:00, 2012:01:25 13:51:53-06:00, 2012:01:25 13:54:26-06:00, 2012:01:25 13:56:29-06:00, 2012:01:25 13:59:43-06:00, 2012:01:25 14:09:46-06:00, 2012:01:27 08:26:37-06:00, 2012:01:30 10:33:18-06:00, 2012:01:30 10:58:53-06:00, 2012:01:30 14:33:57-06:00, 2012:01:31 09:25:09-06:00, 2012:01:31 09:35:13-06:00, 2012:01:31 09:38:08-06:00, 2012:01:31 13:57:58-06:00, 2012:01:31 14:08:57-06:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Derived From Instance ID        : xmp.iid:3FC4486EFD3DE1119D89ED76C36C3BDC
Derived From Document ID        : xmp.did:505A9655F57FE011B41FE8B08317C238
Derived From Original Document ID: xmp.did:AB7CD0303CE3DE118CFCC7821E1AAA70
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 376.42, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 376.42, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:F62A6B43CC8EDC11BDC5B00F3BC4683A, uuid:E2C67558C396DC11AC16E827D10EBFEA, uuid:1D075C7B26A5DD118A71F924E8F7FA0C, uuid:69114BF97FAFDE11A339F4E9AA4FDC02, uuid:457c3605-b847-11da-b860-a1401187ef75, uuid:12344FDCDAAFDC118374BD56EFE65A2C, uuid:5b4361ee-8b2c-11d9-b3c5-988c8e20fa8b, uuid:C5D433C7218EDC119E5699637C7D5AA0, xmp.iid:88C14B51FE7BE011BF7DB83BC58ADCD7, uuid:489A6BB3F88EDC11BDC5B00F3BC4683A, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:3A8C078F6B1CDD119B1EF05E3BCCFCCB, uuid:2A2CDE29198EDC119E5699637C7D5AA0, uuid:CB1BF7E35BD6DC11B111FD42A9F18FDB, xmp.iid:DCBBE8291DC0DF11990ECB62B53C016A, uuid:9177D833FE8DDC119E5699637C7D5AA0, uuid:D948740942C4DC11A7259D5B2407FCDE, uuid:12FC5C858BD5DC11A7E093ED6AD757FC, uuid:1D813DBA8ED5DC11A7E093ED6AD757FC, uuid:B823181D8CD5DC11A7E093ED6AD757FC, xmp.iid:7903684AEC0CDF1198CDF05C043E67B8, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:7835788AA3B4DC11A3A5CFE2A8B082FF, xmp.iid:40B1F008C687E011A7C1E1E556810F35, uuid:EBEA168B26A5DD118A71F924E8F7FA0C, uuid:EFFD3ED92733DE118F25C93228A770EC, uuid:3531D4EE8CB2DE119711A7A31D7833FA, uuid:b0760c92-d5ca-11d8-a743-e33ae4fbfcdb, uuid:20322B7E8DB2DE119711A7A31D7833FA, uuid:BB2C4E6F1116DD119B89BC98B4A4583C, uuid:505509F41016DD119B89BC98B4A4583C, uuid:DB8B97344FC4DC11A7259D5B2407FCDE, xmp.iid:29C3795A9032DF11970D980C30F54256, uuid:5f72c54e-bc40-11db-946a-b29454b5ca4f, xmp.iid:AA72189842A9DF11A270B340A9C871B6, xmp.iid:5C5CF3F78E96DF119556A41F296780FA, xmp.iid:C6163BCA2285DF11B1B3A456B38F7974, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:BC163BCA2285DF11B1B3A456B38F7974, xmp.iid:4B34E4860489DF11BBE2B2B33F618AA1, xmp.iid:F43816BEB798DF118D53BD6A9D82CB7B, xmp.iid:1B882D8C63D8DF11909EC0FE98851737, xmp.iid:9FE2C87754F6DF118FA8E3A86EC6172B, xmp.iid:F18D010BA12FE011B46181755C444AC5, xmp.iid:54F9E7F8A62FE011B46181755C444AC5, xmp.iid:07BE8C6E5797E0118AB2C4C5EDF4ACE3, xmp.iid:6460ABA21E0AE111A564FBEB2D97E19A, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:64D4DF5C5BD6DC11B111FD42A9F18FDB, uuid:B9B468F2C292DC1190399D2BCBA6500B, uuid:A271ABD16994DC11B984D537A0ABD6BB, uuid:31F7F5A10E16DD119B89BC98B4A4583C, uuid:35F7F5A10E16DD119B89BC98B4A4583C, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:2DC3795A9032DF11970D980C30F54256, uuid:2A2CDE29198EDC119E5699637C7D5AA0, uuid:2A2CDE29198EDC119E5699637C7D5AA0, xmp.iid:7903684AEC0CDF1198CDF05C043E67B8, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:045530A0AF96DC11AC16E827D10EBFEA, uuid:F62A6B43CC8EDC11BDC5B00F3BC4683A, uuid:6043E0F25BD6DC11B111FD42A9F18FDB, uuid:7F61CA91AF96DC11AC16E827D10EBFEA, uuid:8A19402452B3DE11BCD9F75FFABF8A71, uuid:8AE6A910268EDC119E5699637C7D5AA0, uuid:CB1BF7E35BD6DC11B111FD42A9F18FDB, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:B3C9E887A887E011A7C1E1E556810F35, xmp.iid:40B1F008C687E011A7C1E1E556810F35, xmp.iid:46B1F008C687E011A7C1E1E556810F35, xmp.iid:7FB7B19F5AC3E011BD51D2953594180A, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:46B1F008C687E011A7C1E1E556810F35, xmp.iid:7FB7B19F5AC3E011BD51D2953594180A, xmp.iid:40B1F008C687E011A7C1E1E556810F35, uuid:9177D833FE8DDC119E5699637C7D5AA0, uuid:AD654A15128EDC119E5699637C7D5AA0, uuid:9177D833FE8DDC119E5699637C7D5AA0, uuid:AD654A15128EDC119E5699637C7D5AA0, uuid:9177D833FE8DDC119E5699637C7D5AA0, uuid:AD654A15128EDC119E5699637C7D5AA0, uuid:E2C67558C396DC11AC16E827D10EBFEA, uuid:614BEA3A5CD6DC11B111FD42A9F18FDB, uuid:F25976645CD6DC11B111FD42A9F18FDB, uuid:7E4D04726294DC11B984D537A0ABD6BB, xmp.iid:DCBBE8291DC0DF11990ECB62B53C016A, xmp.iid:DCBBE8291DC0DF11990ECB62B53C016A, xmp.iid:48B61126B00FE1119C98F44BA88CED9D, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:12FC5C858BD5DC11A7E093ED6AD757FC, uuid:1D813DBA8ED5DC11A7E093ED6AD757FC, uuid:446368468CD5DC11A7E093ED6AD757FC, uuid:6CB156748BD5DC11A7E093ED6AD757FC, uuid:3144AB4F8ED5DC11A7E093ED6AD757FC, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:3A8C078F6B1CDD119B1EF05E3BCCFCCB, uuid:C8724962983CDD11842DAD060C35BB13, uuid:B823181D8CD5DC11A7E093ED6AD757FC, uuid:B823181D8CD5DC11A7E093ED6AD757FC, uuid:743F222545C4DC11A7259D5B2407FCDE, uuid:6A756965079DDC11921583C89F307B5C, uuid:743F222545C4DC11A7259D5B2407FCDE, uuid:F46B2A9E0F9DDC11921583C89F307B5C, uuid:93D1BB3E8CD5DC11A7E093ED6AD757FC, xmp.iid:9D00ED30FF10DF11AF548E23D37D4B2F, xmp.iid:9D00ED30FF10DF11AF548E23D37D4B2F, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:D7BF4708A39EDC11B86D8F8A58093B68, uuid:D7BF4708A39EDC11B86D8F8A58093B68, xmp.iid:2CB6D237FD0CDF1198CDF05C043E67B8, uuid:D63461584B91DC119F46B24B1412CCB2, xmp.iid:7A03684AEC0CDF1198CDF05C043E67B8, xmp.iid:7A03684AEC0CDF1198CDF05C043E67B8, uuid:3EF055873C91DC119F46B24B1412CCB2, uuid:3EF055873C91DC119F46B24B1412CCB2, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:D36A30AD3E98DC11AC2DD0E6A69BDFB5, uuid:D36A30AD3E98DC11AC2DD0E6A69BDFB5, uuid:EAFCD4D35DD6DC11B111FD42A9F18FDB, uuid:BDBF05E65DD6DC11B111FD42A9F18FDB, uuid:93D1BB3E8CD5DC11A7E093ED6AD757FC, xmp.iid:57E58AB8FA10DF11AF548E23D37D4B2F, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:FE76F6408F97DC11A725BCED6B0D41B4, uuid:FE76F6408F97DC11A725BCED6B0D41B4, uuid:641E20EC569FDC11AA70B50E6948F6CA, uuid:2F5347900C92DC11951DA00797F52504, uuid:BB4B7F55589FDC11AA70B50E6948F6CA, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:CEC44287FEFBE011BC4DE2BBA4640132, uuid:3363C00D8AD5DC11A7E093ED6AD757FC, uuid:215C58048AD5DC11A7E093ED6AD757FC, uuid:12ECC3CD82D5DC11A7E093ED6AD757FC, uuid:D948740942C4DC11A7259D5B2407FCDE, uuid:25E58929DEBADC1192FCE63B1C999090, uuid:FB5976645CD6DC11B111FD42A9F18FDB, xmp.iid:5C5CF3F78E96DF119556A41F296780FA, xmp.iid:CA7B6CD32D4BE0118FD8927A9C90A4C5, xmp.iid:BB8714018D47E1118960B8F10DF29936, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:61BF42BAA796E011A31B9305488F960F, xmp.iid:63BF42BAA796E011A31B9305488F960F, xmp.iid:07BE8C6E5797E0118AB2C4C5EDF4ACE3, xmp.iid:09BE8C6E5797E0118AB2C4C5EDF4ACE3, xmp.iid:5A6028DF6B97E0118AB2C4C5EDF4ACE3, xmp.iid:5C6028DF6B97E0118AB2C4C5EDF4ACE3, xmp.iid:5F6028DF6B97E0118AB2C4C5EDF4ACE3, xmp.iid:5FBF42BAA796E011A31B9305488F960F, uuid:e67b4db7-dda0-11d9-8d10-8fa2e1f4bd63, uuid:b0760c92-d5ca-11d8-a743-e33ae4fbfcdb, uuid:f49ddce1-5849-11d9-bb63-950bd165a094, uuid:5b4361ee-8b2c-11d9-b3c5-988c8e20fa8b, uuid:b0760c92-d5ca-11d8-a743-e33ae4fbfcdb, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:ABA56C52477DDF118F8DD5AF9349391F, uuid:8f9c98a6-d48a-11da-9fed-e13481d3d7ec, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:F18D010BA12FE011B46181755C444AC5, xmp.iid:ABA56C52477DDF118F8DD5AF9349391F, xmp.iid:F18D010BA12FE011B46181755C444AC5, xmp.iid:EC935C87E394DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:EC935C87E394DF11A562901BF394BFBE, xmp.iid:5DF9E7F8A62FE011B46181755C444AC5, xmp.iid:ABA56C52477DDF118F8DD5AF9349391F, xmp.iid:F18D010BA12FE011B46181755C444AC5, xmp.iid:EC935C87E394DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:EC935C87E394DF11A562901BF394BFBE, xmp.iid:5DF9E7F8A62FE011B46181755C444AC5, xmp.iid:E9935C87E394DF11A562901BF394BFBE, xmp.iid:BC335073DB94DF11A562901BF394BFBE, xmp.iid:1F7485AEFF94DF11A562901BF394BFBE, xmp.iid:E9935C87E394DF11A562901BF394BFBE, xmp.iid:BC335073DB94DF11A562901BF394BFBE, xmp.iid:BC335073DB94DF11A562901BF394BFBE, xmp.iid:BC335073DB94DF11A562901BF394BFBE, xmp.iid:1F7485AEFF94DF11A562901BF394BFBE, xmp.iid:8F220A236080DF118AE4A69874D72C9F, xmp.iid:537091E3C87EDF11B05EE346935A2894, xmp.iid:C6163BCA2285DF11B1B3A456B38F7974, xmp.iid:EC935C87E394DF11A562901BF394BFBE, xmp.iid:1E7485AEFF94DF11A562901BF394BFBE, xmp.iid:517091E3C87EDF11B05EE346935A2894, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:97B29C1AD47EDF11B05EE346935A2894, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:BC163BCA2285DF11B1B3A456B38F7974, xmp.iid:C0163BCA2285DF11B1B3A456B38F7974, xmp.iid:E9935C87E394DF11A562901BF394BFBE, xmp.iid:BC335073DB94DF11A562901BF394BFBE, xmp.iid:1F7485AEFF94DF11A562901BF394BFBE, xmp.iid:93220A236080DF118AE4A69874D72C9F, xmp.iid:4934E4860489DF11BBE2B2B33F618AA1, xmp.iid:517091E3C87EDF11B05EE346935A2894, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:4B34E4860489DF11BBE2B2B33F618AA1, xmp.iid:FBFCE64C0B89DF11BBE2B2B33F618AA1, xmp.iid:BA335073DB94DF11A562901BF394BFBE, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:49BBD05523AADF118A9FF148E2E707BC, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:F03816BEB798DF118D53BD6A9D82CB7B, xmp.iid:F83816BEB798DF118D53BD6A9D82CB7B, xmp.iid:537091E3C87EDF11B05EE346935A2894, xmp.iid:517091E3C87EDF11B05EE346935A2894, xmp.iid:517091E3C87EDF11B05EE346935A2894, xmp.iid:517091E3C87EDF11B05EE346935A2894, xmp.iid:A0240031157BE011B7C2E00E5B0029A1, uuid:07d56edf-4cfb-11d8-af7a-a42ac690fa2f, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:da58845e-5588-11d8-b4f2-8f094956510a, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, uuid:78b602e3-bf66-11da-bb67-882ded050ec2, uuid:501B2B218118DD11A68787938B19A583, xmp.iid:B6DD281ED065E011AFD5EBE6B375F457, xmp.iid:E5DA18D21E86E011AD40B03B68C0B326, xmp.iid:89B3474BEB15E11194FEF85F89F9275B, xmp.iid:62A2B9650116E11194FEF85F89F9275B, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, uuid:308C55773BCFDC11B348989F95E68D2A, uuid:32fd231d-7108-11d8-8065-d74f9e77a358, uuid:32fd231d-7108-11d8-8065-d74f9e77a358, xmp.iid:636F9F0B3AE3DE1187E7D9C0C3C5CF8E, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:3c778d88-b8a6-11d9-9129-89bd7db602da, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, uuid:9072356E8018DD11A68787938B19A583, uuid:5f72c54e-bc40-11db-946a-b29454b5ca4f, uuid:210c857f-bc40-11db-946a-b29454b5ca4f, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:EB5705D9CF98DF118D53BD6A9D82CB7B, xmp.iid:54F9E7F8A62FE011B46181755C444AC5, uuid:1D075C7B26A5DD118A71F924E8F7FA0C, uuid:1D075C7B26A5DD118A71F924E8F7FA0C, uuid:D4B457D0FD28DD11B68F92916250ED06, uuid:13DE74A3EF2BDD11B60A87CD2A5D9D90, uuid:1D075C7B26A5DD118A71F924E8F7FA0C, uuid:BBD99A9BF02BDD11B60A87CD2A5D9D90, uuid:1D075C7B26A5DD118A71F924E8F7FA0C, uuid:6444F2D09068DD11B4E7AEEABE2D4B99, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:4CB61126B00FE1119C98F44BA88CED9D, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:44E465ACEA30DE11998C8B4CB7485973, uuid:4854EB143B33DE118F25C93228A770EC, uuid:EFFD3ED92733DE118F25C93228A770EC, uuid:26FC9A903A33DE118F25C93228A770EC, uuid:62A8D5C12533DE118F25C93228A770EC, uuid:4C54EB143B33DE118F25C93228A770EC, uuid:4C54EB143B33DE118F25C93228A770EC, xmp.iid:88C14B51FE7BE011BF7DB83BC58ADCD7, xmp.iid:B4D49619567AE011B42BD6A254FE70BA, xmp.iid:6BF64876677AE011B42BD6A254FE70BA, xmp.iid:37090D1B10B2E01191FBC20819153B2D, xmp.iid:6DF64876677AE011B42BD6A254FE70BA, xmp.iid:A4240031157BE011B7C2E00E5B0029A1, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:955897155FB1E0118C98AD5041B643DB, xmp.iid:975897155FB1E0118C98AD5041B643DB, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:995897155FB1E0118C98AD5041B643DB, xmp.iid:BFC8B0FBA1B3E011BBEBFB4AE6904ED8, xmp.iid:A07D1B11F0B2E01194C5B3FBD375D12A, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:70bef686-7197-11da-b719-b2f8ea9c74a3, uuid:0655C6888118DD11A68787938B19A583, xmp.iid:417DFB93A3B3E011BBEBFB4AE6904ED8, xmp.iid:CE2907E7C9B3E011BBEBFB4AE6904ED8, xmp.iid:BEC8B0FBA1B3E011BBEBFB4AE6904ED8, xmp.iid:44B61126B00FE1119C98F44BA88CED9D, xmp.iid:AC9F9DDFA60FE1119C98F44BA88CED9D, xmp.iid:000C8286363DE111A22DCCA9C4F93958, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:D84B40ACB50FDD119F86A828EA1CEBA3, uuid:0160F92A92B2DE119711A7A31D7833FA, uuid:457c3605-b847-11da-b860-a1401187ef75, xmp.iid:29C3795A9032DF11970D980C30F54256, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:4A67140201ACE011BA0CAC1E03888806, xmp.iid:4BB801F0DDABE011AA19B2E1ECD18091, uuid:3F1D1F4F1116DD119B89BC98B4A4583C, uuid:505509F41016DD119B89BC98B4A4583C, xmp.iid:AA72189842A9DF11A270B340A9C871B6, xmp.iid:269C0FA717B2E01191FBC20819153B2D, xmp.iid:74DC9EF03509E011B480B8A6F6B58937, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, uuid:D88B97344FC4DC11A7259D5B2407FCDE, uuid:DB8B97344FC4DC11A7259D5B2407FCDE, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:1B882D8C63D8DF11909EC0FE98851737, xmp.iid:03AD77ADA4D7DF119DA4ADC756BC745C, xmp.iid:0BA5668AC32FE0118DC8A4DE69F64172, xmp.iid:11A5668AC32FE0118DC8A4DE69F64172, uuid:3531D4EE8CB2DE119711A7A31D7833FA, uuid:6E73DFCC8CB2DE119711A7A31D7833FA, uuid:6B73DFCC8CB2DE119711A7A31D7833FA, uuid:99642A6DCC30DE11998C8B4CB7485973, uuid:D1F538DC2429DE11AB9C9D0973A181D9, xmp.iid:FF2F2868022EDF118B1BF22C5B156EC8, xmp.iid:02302868022EDF118B1BF22C5B156EC8, xmp.iid:04302868022EDF118B1BF22C5B156EC8, xmp.iid:9FE2C87754F6DF118FA8E3A86EC6172B, xmp.iid:0CF5991C119CE01185F4AA7A95B0F62F, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:364580FA440AE111A564FBEB2D97E19A, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:6D60ABA21E0AE111A564FBEB2D97E19A, xmp.iid:6660ABA21E0AE111A564FBEB2D97E19A, xmp.iid:366025C84811E111B29DF313AA8E7C5F, xmp.iid:74DC9EF03509E011B480B8A6F6B58937, xmp.iid:74DC9EF03509E011B480B8A6F6B58937, xmp.iid:74DC9EF03509E011B480B8A6F6B58937, xmp.iid:C282D5C6D130E1119C448967946337F9, xmp.iid:994D794701E6E011B566A26B18745A93, xmp.iid:886778F9E10AE1118F2ED3E5410CED58, xmp.iid:3B6025C84811E111B29DF313AA8E7C5F, xmp.iid:74DC9EF03509E011B480B8A6F6B58937, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, xmp.iid:934D794701E6E011B566A26B18745A93, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, uuid:29152d8d-bb28-11d9-b2d6-d0c2b4be8665, xmp.iid:12B330B81BE9E01181EDF9435903C7EE, uuid:78b602e3-bf66-11da-bb67-882ded050ec2, xmp.iid:1194B8151BE9E01181EDF9435903C7EE, xmp.iid:2075262BCD19E111802AC40425D22377, xmp.iid:934D794701E6E011B566A26B18745A93, xmp.iid:1194B8151BE9E01181EDF9435903C7EE, xmp.iid:12B330B81BE9E01181EDF9435903C7EE, xmp.iid:2080BAC7AD37E111ADE3A2D2360D17AA, uuid:DDF3DD3EA4F7DD118F278864628DFAA6, xmp.iid:A1E31F53AB0BE111A24FC8836DA0FFEF, xmp.iid:C0163BCA2285DF11B1B3A456B38F7974, xmp.iid:A3E31F53AB0BE111A24FC8836DA0FFEF, xmp.iid:87B3474BEB15E11194FEF85F89F9275B, uuid:d9ea9469-7196-11da-b719-b2f8ea9c74a3, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:6F65B7CEF8F3DF1187EDCF83640C2B66, xmp.iid:728A39A0F8F3DF1187EDCF83640C2B66, xmp.iid:788A39A0F8F3DF1187EDCF83640C2B66, xmp.iid:748A39A0F8F3DF1187EDCF83640C2B66, xmp.iid:708A39A0F8F3DF1187EDCF83640C2B66, xmp.iid:CEDE631DE32DDF118B1BF22C5B156EC8, xmp.iid:768A39A0F8F3DF1187EDCF83640C2B66, xmp.iid:EE69D8499E46E111BF75CC4F973F3DE6, xmp.iid:97B29C1AD47EDF11B05EE346935A2894, uuid:40c52980-bc40-11db-946a-b29454b5ca4f, xmp.iid:537091E3C87EDF11B05EE346935A2894
Manifest Reference Document ID  : uuid:EA68FD74548DDC119AAABEAB71BF4E30, uuid:7C3D3ADA3B8DDC119AAABEAB71BF4E30, uuid:D7B457D0FD28DD11B68F92916250ED06, uuid:68114BF97FAFDE11A339F4E9AA4FDC02, adobe:docid:photoshop:d11733b4-b83c-11da-b860-a1401187ef75, uuid:379F436B8B93DC11A4C7B6510C95FF5E, adobe:docid:photoshop:f6497a4f-1317-11d9-8c1e-e85f871c1c38, uuid:F12316F7548DDC119AAABEAB71BF4E30, xmp.did:796AE8720F7BE011B7C2E00E5B0029A1, uuid:C4132036828CDC11AE96DBACB4330193, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, adobe:docid:photoshop:9cadfd4a-1c48-11dd-9f60-dd7367db1431, uuid:EF362503518DDC119AAABEAB71BF4E30, uuid:677EE08F518DDC119AAABEAB71BF4E30, uuid:BBA290EE8993DC11A4C7B6510C95FF5E, uuid:5204496DA68CDC11AE96DBACB4330193, uuid:BA41BE4417BADC11807EC2B6F97CC51C, uuid:2A5F553BBB8BDC11A299F858A786E0B8, uuid:68C6E873BC8BDC11A299F858A786E0B8, uuid:176AC0F3BB8BDC11A299F858A786E0B8, xmp.did:05E5A2EBA8D3DE118F30B7838DE86FDD, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, uuid:76E38A27A2B4DC11A3A5CFE2A8B082FF, xmp.did:0162BE8B0F86E011AD40B03B68C0B326, uuid:A2289742FB28DD11B68F92916250ED06, uuid:EEFD3ED92733DE118F25C93228A770EC, uuid:C80A9FE60A29DE11AB9C9D0973A181D9, adobe:docid:photoshop:b0760c8e-d5ca-11d8-a743-e33ae4fbfcdb, adobe:docid:photoshop:48f996ca-b83a-11da-b860-a1401187ef75, adobe:docid:photoshop:21eef44d-b83a-11da-b860-a1401187ef75, adobe:docid:photoshop:ce4f1377-b839-11da-b860-a1401187ef75, adobe:docid:photoshop:06437290-b83a-11da-b860-a1401187ef75, xmp.did:C6FF6D4057F5DE119184E48FE74B48E5, adobe:docid:photoshop:5f72c54d-bc40-11db-946a-b29454b5ca4f, xmp.did:F2661BDB5F33DF11A75AAC460A2483A7, xmp.did:0D3725A39195DF11922F984331EEFB96, xmp.did:ABEEEF561A85DF11B1B3A456B38F7974, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A9EEEF561A85DF11B1B3A456B38F7974, xmp.did:72C73BA25284DF11BA5AA40CCCE62330, xmp.did:EA88E586D594DF11A562901BF394BFBE, xmp.did:41BD8BD25ED8DF11909EC0FE98851737, xmp.did:55BC161345F6DF118FA8E3A86EC6172B, uuid:DA7F0930800311DD9CF4EB58E986845F, xmp.did:F28D010BA12FE011B46181755C444AC5, xmp.did:90370A5C9E96E011A31B9305488F960F, xmp.did:7B14D9E45B09E111A316B4E2E0CB3F5E, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:4D8A73CB6A94DC11B984D537A0ABD6BB, uuid:595CCF3F528DDC119AAABEAB71BF4E30, uuid:A171ABD16994DC11B984D537A0ABD6BB, uuid:2DF7F5A10E16DD119B89BC98B4A4583C, uuid:34F7F5A10E16DD119B89BC98B4A4583C, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:03E5A2EBA8D3DE118F30B7838DE86FDD, uuid:EF362503518DDC119AAABEAB71BF4E30, uuid:EF362503518DDC119AAABEAB71BF4E30, xmp.did:05E5A2EBA8D3DE118F30B7838DE86FDD, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:2AACCAF7538DDC119AAABEAB71BF4E30, uuid:EA68FD74548DDC119AAABEAB71BF4E30, uuid:DC3D48EA35C4DC1188A9DA0725EE1F21, uuid:8FAE0DF7528DDC119AAABEAB71BF4E30, uuid:CE020089538DDC119AAABEAB71BF4E30, uuid:D2020089538DDC119AAABEAB71BF4E30, uuid:677EE08F518DDC119AAABEAB71BF4E30, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:34D5B2141286E011AD40B03B68C0B326, xmp.did:0162BE8B0F86E011AD40B03B68C0B326, xmp.did:388D0879A487E011A7C1E1E556810F35, xmp.did:F6951E92B2C2E011858FD42F8D56EC69, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:388D0879A487E011A7C1E1E556810F35, xmp.did:F6951E92B2C2E011858FD42F8D56EC69, xmp.did:0162BE8B0F86E011AD40B03B68C0B326, uuid:5204496DA68CDC11AE96DBACB4330193, uuid:783D3ADA3B8DDC119AAABEAB71BF4E30, uuid:5204496DA68CDC11AE96DBACB4330193, uuid:783D3ADA3B8DDC119AAABEAB71BF4E30, uuid:5204496DA68CDC11AE96DBACB4330193, uuid:783D3ADA3B8DDC119AAABEAB71BF4E30, uuid:7C3D3ADA3B8DDC119AAABEAB71BF4E30, adobe:docid:photoshop:201c8323-9466-11dc-8869-920c5e7e2d8e, uuid:8BE851363EC4DC11AF7BF614C695BE4C, uuid:339F436B8B93DC11A4C7B6510C95FF5E, uuid:BBA290EE8993DC11A4C7B6510C95FF5E, uuid:BBA290EE8993DC11A4C7B6510C95FF5E, xmp.did:DB5BDD069F0FE1119C98F44BA88CED9D, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:2A5F553BBB8BDC11A299F858A786E0B8, uuid:68C6E873BC8BDC11A299F858A786E0B8, uuid:911F0AF5CE8BDC11A299F858A786E0B8, uuid:D765E66E9993DC11A4C7B6510C95FF5E, uuid:3A8E4E989993DC11A4C7B6510C95FF5E, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, adobe:docid:photoshop:9cadfd4a-1c48-11dd-9f60-dd7367db1431, uuid:D1EC111FAB17DD119ED0BB537EF4584F, uuid:176AC0F3BB8BDC11A299F858A786E0B8, uuid:176AC0F3BB8BDC11A299F858A786E0B8, uuid:B55F2FCBBA8BDC11A299F858A786E0B8, uuid:265F553BBB8BDC11A299F858A786E0B8, uuid:B55F2FCBBA8BDC11A299F858A786E0B8, uuid:225F553BBB8BDC11A299F858A786E0B8, uuid:444FD63A79B5DC119A8A801BE9D03569, xmp.did:B9D412DEE910DF11AF548E23D37D4B2F, xmp.did:B9D412DEE910DF11AF548E23D37D4B2F, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:C8824FAB8A8CDC11AE96DBACB4330193, uuid:C8824FAB8A8CDC11AE96DBACB4330193, uuid:84C437DA8D8CDC11AE96DBACB4330193, uuid:7DC437DA8D8CDC11AE96DBACB4330193, xmp.did:7003684AEC0CDF1198CDF05C043E67B8, xmp.did:7003684AEC0CDF1198CDF05C043E67B8, uuid:F58C98AAD18BDC11A299F858A786E0B8, uuid:F58C98AAD18BDC11A299F858A786E0B8, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, uuid:348D9C478597DC11A725BCED6B0D41B4, uuid:348D9C478597DC11A725BCED6B0D41B4, uuid:286EEF54D08BDC11A299F858A786E0B8, uuid:BF57C617D18BDC11A299F858A786E0B8, uuid:444FD63A79B5DC119A8A801BE9D03569, xmp.did:C50C5D03EA10DF11AF548E23D37D4B2F, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:1459C5CF8597DC11A725BCED6B0D41B4, uuid:1459C5CF8597DC11A725BCED6B0D41B4, uuid:550FC276549FDC11AA70B50E6948F6CA, uuid:64E076EE888CDC11AE96DBACB4330193, uuid:B74B7F55589FDC11AA70B50E6948F6CA, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:8C4F1E4F97F9E011902D8B1594831684, uuid:05E61DCA898CDC11AE96DBACB4330193, uuid:49C775508A8CDC11AE96DBACB4330193, uuid:29B3550034BADC11807EC2B6F97CC51C, uuid:BA41BE4417BADC11807EC2B6F97CC51C, uuid:24E58929DEBADC1192FCE63B1C999090, uuid:FD520CCDD3BADC1192FCE63B1C999090, xmp.did:0D3725A39195DF11922F984331EEFB96, xmp.did:C77B6CD32D4BE0118FD8927A9C90A4C5, xmp.did:953D18689F3CE1119FBCF15C63DAD95A, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:A512C1529996E011A31B9305488F960F, xmp.did:8C370A5C9E96E011A31B9305488F960F, xmp.did:90370A5C9E96E011A31B9305488F960F, xmp.did:94370A5C9E96E011A31B9305488F960F, xmp.did:E534309DA496E011A31B9305488F960F, xmp.did:E934309DA496E011A31B9305488F960F, xmp.did:5CBF42BAA796E011A31B9305488F960F, xmp.did:A712C1529996E011A31B9305488F960F, adobe:docid:photoshop:4dd098e0-c612-11d9-88ba-bc08f1ee12af, adobe:docid:photoshop:b0760c8e-d5ca-11d8-a743-e33ae4fbfcdb, adobe:docid:photoshop:f49ddce0-5849-11d9-bb63-950bd165a094, adobe:docid:photoshop:f6497a4f-1317-11d9-8c1e-e85f871c1c38, adobe:docid:photoshop:b0760c8e-d5ca-11d8-a743-e33ae4fbfcdb, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, adobe:docid:photoshop:9f6f899e-bf4a-11da-bb67-882ded050ec2, adobe:docid:photoshop:8f9c98a5-d48a-11da-9fed-e13481d3d7ec, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, uuid:DA7F0930800311DD9CF4EB58E986845F, adobe:docid:photoshop:9f6f899e-bf4a-11da-bb67-882ded050ec2, uuid:DA7F0930800311DD9CF4EB58E986845F, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:5CF9E7F8A62FE011B46181755C444AC5, adobe:docid:photoshop:9f6f899e-bf4a-11da-bb67-882ded050ec2, uuid:DA7F0930800311DD9CF4EB58E986845F, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:5CF9E7F8A62FE011B46181755C444AC5, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, uuid:92B1782BF07911DE8041E03351B11CED, uuid:8DE196E131DF11DF8376C607B3639679, xmp.did:ABEEEF561A85DF11B1B3A456B38F7974, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A0B784C3D394DF11A562901BF394BFBE, uuid:57029F951EDC11DF9D85CD517727E5C0, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, uuid:0BF8C6C9E71D11DEA936E8299FBA1679, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, xmp.did:A9EEEF561A85DF11B1B3A456B38F7974, xmp.did:ABEEEF561A85DF11B1B3A456B38F7974, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:A2B784C3D394DF11A562901BF394BFBE, xmp.did:DC7D56B33A206811A961CF03D5ECD33B, xmp.did:72C73BA25284DF11BA5AA40CCCE62330, uuid:57029F951EDC11DF9D85CD517727E5C0, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, xmp.did:72C73BA25284DF11BA5AA40CCCE62330, xmp.did:72C73BA25284DF11BA5AA40CCCE62330, xmp.did:E688E586D594DF11A562901BF394BFBE, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:B3335073DB94DF11A562901BF394BFBE, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, xmp.did:E888E586D594DF11A562901BF394BFBE, xmp.did:EC88E586D594DF11A562901BF394BFBE, uuid:8DE196E131DF11DF8376C607B3639679, uuid:57029F951EDC11DF9D85CD517727E5C0, uuid:57029F951EDC11DF9D85CD517727E5C0, uuid:57029F951EDC11DF9D85CD517727E5C0, xmp.did:84AB43C3107BE011B7C2E00E5B0029A1, adobe:docid:photoshop:07d56edb-4cfb-11d8-af7a-a42ac690fa2f, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, adobe:docid:photoshop:b160b379-5583-11d8-b4f2-8f094956510a, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, adobe:docid:photoshop:78b602e2-bf66-11da-bb67-882ded050ec2, adobe:docid:photoshop:92b7823b-de01-11db-a7ed-cf45be62c647, xmp.did:B5DD281ED065E011AFD5EBE6B375F457, xmp.did:E0DA18D21E86E011AD40B03B68C0B326, xmp.did:81B3474BEB15E11194FEF85F89F9275B, xmp.did:2F3EC134E815E11194FEF85F89F9275B, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, adobe:docid:photoshop:b919cc50-564d-11d8-a5cd-ac8cd31d954f, adobe:docid:photoshop:b919cc50-564d-11d8-a5cd-ac8cd31d954f, adobe:docid:photoshop:2c927f8c-d017-11db-89ba-a457204529ec, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, adobe:docid:photoshop:3eaf6ad2-b585-11d9-925b-c4612aa4220b, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, uuid:43F7908CEAD4DC119BCA937D54649387, adobe:docid:photoshop:5f72c54d-bc40-11db-946a-b29454b5ca4f, adobe:docid:photoshop:210c857e-bc40-11db-946a-b29454b5ca4f, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, adobe:docid:photoshop:2c927f8c-d017-11db-89ba-a457204529ec, xmp.did:F28D010BA12FE011B46181755C444AC5, uuid:D7B457D0FD28DD11B68F92916250ED06, uuid:D7B457D0FD28DD11B68F92916250ED06, uuid:A6289742FB28DD11B68F92916250ED06, uuid:0FDE74A3EF2BDD11B60A87CD2A5D9D90, uuid:D7B457D0FD28DD11B68F92916250ED06, uuid:BAD99A9BF02BDD11B60A87CD2A5D9D90, uuid:D7B457D0FD28DD11B68F92916250ED06, uuid:6344F2D09068DD11B4E7AEEABE2D4B99, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, xmp.did:A69F9DDFA60FE1119C98F44BA88CED9D, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, uuid:43E465ACEA30DE11998C8B4CB7485973, uuid:4754EB143B33DE118F25C93228A770EC, uuid:EEFD3ED92733DE118F25C93228A770EC, uuid:25FC9A903A33DE118F25C93228A770EC, uuid:61A8D5C12533DE118F25C93228A770EC, uuid:4B54EB143B33DE118F25C93228A770EC, uuid:4B54EB143B33DE118F25C93228A770EC, xmp.did:796AE8720F7BE011B7C2E00E5B0029A1, xmp.did:95111D9F487AE011B42BD6A254FE70BA, xmp.did:99111D9F487AE011B42BD6A254FE70BA, xmp.did:35090D1B10B2E01191FBC20819153B2D, xmp.did:9B111D9F487AE011B42BD6A254FE70BA, xmp.did:7D6AE8720F7BE011B7C2E00E5B0029A1, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, xmp.did:036C793F3B17DF119611DB8AFA187C7F, xmp.did:A772189842A9DF11A270B340A9C871B6, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, xmp.did:8880F95A931AE0118E48CCA88EDFF612, uuid:6D90672FA83BDD11B6BD82D743B123AF, adobe:docid:photoshop:3370a5c7-5cb3-11d8-8d1e-af1b9efaaf77, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, adobe:docid:photoshop:6d8b7fbe-5750-11d8-aeb4-f0534835fb0b, adobe:docid:photoshop:479f37e0-de00-11db-a7ed-cf45be62c647, xmp.did:417DFB93A3B3E011BBEBFB4AE6904ED8, xmp.did:467DFB93A3B3E011BBEBFB4AE6904ED8, uuid:8FAD0FF72B28DD11A7E4FF0C7D7D6959, xmp.did:D75BDD069F0FE1119C98F44BA88CED9D, xmp.did:D55BDD069F0FE1119C98F44BA88CED9D, xmp.did:FF0B8286363DE111A22DCCA9C4F93958, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, adobe:docid:photoshop:d25517a7-1a92-11dc-b90d-84d4f77b6a9a, uuid:0060F92A92B2DE119711A7A31D7833FA, adobe:docid:photoshop:d11733b4-b83c-11da-b860-a1401187ef75, xmp.did:C6FF6D4057F5DE119184E48FE74B48E5, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:62D993C8A0A8E011A286FDF879C24BC4, xmp.did:A7EF27249DA8E011A286FDF879C24BC4, adobe:docid:photoshop:ce4f1373-b839-11da-b860-a1401187ef75, adobe:docid:photoshop:ce4f1377-b839-11da-b860-a1401187ef75, xmp.did:F2661BDB5F33DF11A75AAC460A2483A7, xmp.did:3C090D1B10B2E01191FBC20819153B2D, uuid:AE87959D277D11DFB539C842707A7CC3, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, adobe:docid:photoshop:06437294-b83a-11da-b860-a1401187ef75, adobe:docid:photoshop:06437290-b83a-11da-b860-a1401187ef75, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:41BD8BD25ED8DF11909EC0FE98851737, xmp.did:B73777AB96D7DF119DA4ADC756BC745C, xmp.did:09A5668AC32FE0118DC8A4DE69F64172, xmp.did:10A5668AC32FE0118DC8A4DE69F64172, uuid:C80A9FE60A29DE11AB9C9D0973A181D9, uuid:4D6F20010B29DE11AB9C9D0973A181D9, uuid:516F20010B29DE11AB9C9D0973A181D9, uuid:98642A6DCC30DE11998C8B4CB7485973, uuid:D0F538DC2429DE11AB9C9D0973A181D9, xmp.did:0E9538709B20DF11A8BEEF570C3233D3, uuid:4A0A6DAEB617DE1183AD9AC4950C7191, xmp.did:109538709B20DF11A8BEEF570C3233D3, xmp.did:55BC161345F6DF118FA8E3A86EC6172B, xmp.did:0BF5991C119CE01185F4AA7A95B0F62F, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, xmp.did:25BDCFD36809E111A316B4E2E0CB3F5E, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:2C76A1815E09E111A316B4E2E0CB3F5E, xmp.did:2E76A1815E09E111A316B4E2E0CB3F5E, xmp.did:2876A1815E09E111A316B4E2E0CB3F5E, uuid:AE87959D277D11DFB539C842707A7CC3, uuid:AE87959D277D11DFB539C842707A7CC3, uuid:AE87959D277D11DFB539C842707A7CC3, xmp.did:9B30BFA311E9E01181EDF9435903C7EE, xmp.did:963E1066FAE5E011B566A26B18745A93, xmp.did:2A76A1815E09E111A316B4E2E0CB3F5E, xmp.did:2676A1815E09E111A316B4E2E0CB3F5E, uuid:AE87959D277D11DFB539C842707A7CC3, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, xmp.did:8D3E1066FAE5E011B566A26B18745A93, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, adobe:docid:photoshop:29152d89-bb28-11d9-b2d6-d0c2b4be8665, xmp.did:9730BFA311E9E01181EDF9435903C7EE, adobe:docid:photoshop:78b602e2-bf66-11da-bb67-882ded050ec2, xmp.did:9930BFA311E9E01181EDF9435903C7EE, xmp.did:1D75262BCD19E111802AC40425D22377, xmp.did:8D3E1066FAE5E011B566A26B18745A93, xmp.did:9930BFA311E9E01181EDF9435903C7EE, xmp.did:9730BFA311E9E01181EDF9435903C7EE, xmp.did:AFAAF6FCFE36E111B3F1ECA1B291DE6B, uuid:DCF3DD3EA4F7DD118F278864628DFAA6, xmp.did:A0E31F53AB0BE111A24FC8836DA0FFEF, xmp.did:ABEEEF561A85DF11B1B3A456B38F7974, xmp.did:9EE31F53AB0BE111A24FC8836DA0FFEF, xmp.did:83B3474BEB15E11194FEF85F89F9275B, adobe:docid:photoshop:eb4dd723-43ac-11d9-9625-fac13639c14d, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, xmp.did:028011740720681192B0B5E1A15F377A, xmp.did:9CECB3DB1620681192B0B5E1A15F377A, xmp.did:9AECB3DB1620681192B0B5E1A15F377A, xmp.did:0A801174072068119109F27F39205AEF, xmp.did:68A8A8A50720681192B0B5E1A15F377A, uuid:3BC761A5285F11DF8B7E91EFAC6CD411, xmp.did:6EA8A8A50720681192B0B5E1A15F377A, xmp.did:EC69D8499E46E111BF75CC4F973F3DE6, uuid:0BF8C6C9E71D11DEA936E8299FBA1679, adobe:docid:photoshop:210c8582-bc40-11db-946a-b29454b5ca4f, uuid:8DE196E131DF11DF8376C607B3639679
Doc Change Count                : 69306
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 44

EXIF Metadata provided by EXIF.tools