Product Detail Manual
2014-09-27
: Pdf 189912-Attachment 189912-Attachment 000334 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 40
| Download | |
| Open PDF In Browser | View PDF |
TW Series Switches & Pilot Lights (14/05/22) ø22 TW Series Selection Guide Function Category Flush Extended Pushbutton Extended w/Full Shroud Momentary/Maintained ø29mm Mushroom ø40mm Mushroom ABW1 AOW1 7 ABW2 AOW2 7 ABFW2 AOFW2 7 ABW3 AOW3 7 ABW4 AOW4 8 Shape Model Page Function Category Pushbutton ø40mm Mushroom w/Full Shroud Momentary ø29mm Mushroom ø40mm Mushroom ø40mm Mushroom ø29mm Mushroom Pushlock Turn Reset Pushlock Turn Reset Push Turn Lock Pushlock Key Reset ABGW4 8 AVW3 8 AVW4 8 AJW4 8 AXW3 8 Shape Model Page Function Category ø40mm Mushroom Pushlock Key Reset Pushbutton ø40mm Mushroom Square Flush Square Extended Push Pull Momentary/Maintained Shape Model AXW4 AYW4 Page 9 9 Function Category ABQW1 AOQW1 9 ABQW2 AOQW2 9 Pilot Light Flush (Non-marking/Marking) Dome Square Flush (Marking) APW2 APQW1B 10 10 Shape Model Page 2 APW1 APW1B 10 (14/05/22) TW Series Selection Guide ø22 Function Category Illuminated Pushbutton (LED/Incandescent) Extended w/Full Shroud Square Extended ø29mm Mushroom Extended (Marking) Pushlock Turn Reset (Non-marking/Marking) (Non-marking/Marking) ø40mm Mushroom Pushlock Turn Reset Shape Part No. Page Function Category ALW2, ALW2B, AOLW2, AOLW2B 12, 13 ALFW2, AOLFW2 ALFW2B, AOLFW2B 14, 15 ALQW2B AOLQW2B 16 AVLW3 AVLW3B 17 AVLW4 AVLW4B 18 Illuminated Pushbutton (Incandescent) ø29mm Mushroom ø40mm Push-Pull (Non-marking/Marking) Shape Part No. Page ALW3, ALW3B, AOLW3, AOLW3B 17 Knob Lever Key Illuminated Selector Switch (LED/Incandescent) Knob ASW 21 ASW∗L 22 ASW∗K 23 ASLW 24, 25 Function Category AYLW4 AYLW4B 18 Selector Switch Shape Part No. Page (14/05/22) 3 ø22 TW Series Switches & Pilot Lights General-purpose switches & pilot lights for various applications Heavy-duty type for high-level protection against harsh environment • Highly reliable HW contact blocks are used. • Degree of protection: IP65 (IEC 60529) • UL and CSA approved, EN compliant Applicable Standards Mark File No. or Organization UL508 UL Listing File No. E68961 CSA C22.2 No.14 CSA File No. LR21451 TÜV Rheinland EN60947-5-1 EU Low Voltage Directive CCC No. 2003010305027380 (pilot light: No. 2007010304226713) GB14048.5 Specifications and Ratings Contact Ratings Contact Block Rated Insulation Voltage Rated Continuous Current Contact Ratings by Utilization Category IEC 60947-5-1 600V 10A AC-15 (A600) DC-13 (P600) Characteristics Contact Ratings by Utilization Category Operational Voltage AC-12 Control of resistive loads and solid state loads AC Operational 50/60 Hz AC-15 Control of electromagnetic loads (> 72 VA) Current DC-12 Control of resistive loads and solid state loads DC DC-13 Control of electromagnets 24V 10A 10A 8A 4A 48V — — 4A 2A 50V 10A 7A — — 110V 10A 5A 2.2A 1.1A 220V 6A 3A 1.1A 0.6A 440V 2A 1A — — Minimum applicable load: 3V AC/DC, 5 mA (applicable range may vary with operating conditions and load types) For the switches & pilot Lights listed below, the rated current (load switching current) is reduced to a half of the rated operational current of the contact block. The rated insulation voltage (600V) and the rated thermal current (10A) remain unchanged. • Selector switches and illuminated selector switches with contact code 2S, 3S, 4S, 2R, or 4R. HW-C (Contact Block) M3.5 terminal screw 2-way wiring possible Contact Blocks Double-break rolling action silver contacts with raked surface Snap-fit groove Fitting groove Push rod Color-coded for different contacts Contact NO NC NO (early make) NC (late break) Housing Blue Purple red Blue Purple red Push Rod Green Red Black White Alkali-resistant 66 nylon housing Snap-fit latch A maximum of four contact blocks in two layers can mount on the operator. Incandescent Lamp Ratings (LS) LS-6 LS-8 LS-2 BA9S/13 6V AC/DC 12V AC/DC 18V AC/DC 1W (6.3V) 1W (18V) 1W (24V) Die stamped on the base Approx. 1,000 hours minimum Life (reference value) (mean value when used on the rated voltage) Part No. Lamp Base Rated Voltage Wattage Voltage Marking 4 LS-3 24V AC/DC 1W (30V) (14/05/22) TW Series Switches & Pilot Lights ø22 LED Lamp Ratings (LSTD) Part No. Lamp Base Rated Voltage Voltage Range AC DC Current Draw Color Code Lamp Base Color Voltage Marking Life (reference value) LSTD-6 LSTD-1 LSTD-2 BA9S/13 6V AC/DC 12V AC/DC 24V AC/DC 6V AC/DC ±10% 12V AC/DC ±10% 24V AC/DC ±10% 8 mA 11 mA 11 mA A, R, W: 7 mA, G, PW, S: 5.5 mA 10 mA 10 mA A (amber), G (green), PW (pure white), R (red), S (blue), W (white) Use a pure white LED lamp for yellow illumination Same as illumination color Die stamped on the base Approx. 50,000 hours (until the brightness reduces to 50% of the initial value when lit at complete direct current of the rated voltage under 25ºC environment.) X1 LED Chip Protection Diode Internal Circuit Zener Diode X2 Resistor Specifications Operating Temperature Storage Temperature Operating Humidity Contact Resistance Insulation Resistance Dielectric Strength Vibration Resistance Shock Resistance Mechanical Life (minimum operations) Electrical Life (minimum operations) Weight (approx.) –25 to +50°C (no freezing) –40 to +80°C 45 to 85% RH (no condensation) 50 mΩ maximum (initial value) 100 MΩ minimum (500V DC megger) Between live and dead metal parts: 2,500V AC, 1 minute (Full voltage illuminated units: 2,000V AC, 1 minute) Damage Limits: 30 Hz, amplitude 1.5 mm Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Damage limits: 1,000 m/s2 Operating extremes: 100 m/s2 Pushbuttons, Illuminated pushbuttons Momentary: 5,000,000 Others: 500,000 500,000 Selector switches: Illuminated selector switches: 500,000 500,000 (switching frequency 1,800 operations/h, duty ratio 40%) Pushbuttons: Illuminated pushbuttons: 500,000 (switching frequency 1,800 operations/h, duty ratio 40%) 500,000 (switching frequency 1,200 operations/h, duty ratio 40%) Selector switches: 68g (ABW122) 33g (APW122D) 89g (ALW22222D) 68g (ASW222) 107g (ASW2K22) 90g (ASLW22222D) 95g (APW126D) Mounting Hole Layout R0.8 max. 50 +0 . 0 4 (45 min.) .3 +0.2 0 (Note 1) 24.1 +0.4 0 3.2 ø22 30 (Note 2) Note 1: The 3.2 mm recess is for preventing rotation and is not necessary when the nameplate or antirotation ring is not used. Note 2: The minimum mounting centers are applicable to switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks are mounted, determine the minimum mounting centers in consideration of convenience for wiring. • ø40mm mushroom: 40 mm minimum • 2-position, 3-position lever selector switch: 39 mm minimum • 4-position, 5-position lever selector switch: 50 mm minimum Degree of Protection Part No. A∗∗∗∗ Unit NEMA ICS 6-110 IEC 60529 Pushbuttons, pilot lights, illuminated pushbuttons, and selector switches Type 1, 2, 3, 3R, (3S), 4, 5, 12,13 IP65 Illuminated selector switches, key pushbuttons, key reset pushbuttons, and key selector switches Type 1, 2, 3R, 5, 12, 13 IP54 Note: (3S) of NEMA ICS 6-110 applies to the pilot lights with round lens. (14/05/22) 5 ø22 TW Series Ordering Information Ordering Information • Specify an operator or lens color code in the Part No. • All standard units are UL, CSA, EN, and TÜV approved. • When a terminal cover is required, order an applicable terminal cover referring to page 29. Part No. development charts shown below can be used to specify switches/pilot lights other than those listed on the following pages. Gold-plated silver contacts are also available. Pushbuttons Illuminated Pushbuttons ALFW2 126 13 D R - MAU ABW1 11 R - MAU Optional contact MAU: Gold-plated silver contact Button color code Contact arrangement code 10: 1NO 01: 1NC 11: 1NO-1NC 20: 2NO 02: 2NC 21: 2NO-1NC 30: 3NO 12: 1NO-2NC 03: 3NC 31: 3NO-1NC 22: 2NO-2NC 13: 1NO-3NC 04: 4NC 40: 4NO Optional contact MAU: Gold-plated silver contact Lens color code Contact arrangement code 10: 1NO 01: 1NC 11: 1NO-1NC 20: 2NO 02: 2NC 21: 2NO-1NC 12: 1NO-2NC 30: 3NO 03: 3NC 31: 3NO-1NC 22: 2NO-2NC 13: 1NO-3NC 40: 4NO 04: 4NC Operating voltage code Note: • Push-pull type AYW4 can have a maximum of two contact blocks. Note: • Push-pull type AYLW4 can have a maximum of two contact blocks. Pilot Lights Selector Switch APW2 126 D R Lens color code Operating voltage code Key Selector Switch ASW 2 K 20 B - MAU Optional contact MAU: Gold-plated silver contact Key removable position code 2-position • Maintained (blank): Removable in all positions B: Removable in left only C: Removable in right only • Spring return from right (blank): Removable in left only • Spring return from left (blank): Removable in right only 3-position • Maintained (blank): Removable in all positions B: Removable in left and center C: Removable in right and center D: Removable in center only E: Removable in right and left G: Removable in left only H: Removable in right only • Spring return from right (blank): Removable in left and center D: Removable in center only G: Removable in left only • Spring return from left (blank): Removable in right and center D: Removable in center only H: Removable in right only • Spring return two-way (blank): Removable in center only Contact arrangement code Number of positions ASW 2 L 11 - MAU Optional contact MAU: Gold-plated silver contact Contact arrangement code Operator type (blank): Knob L: Lever Number of positions Note: • See pages 26 to 28 for contact arrangement codes. Illuminated Selector Switch ASLW 2 16 22 D R - MAU Optional contact MAU: Gold-plated silver contact Lens color code Contact arrangement code Operating voltage code Number of positions Note: • See pages 26 to 28 for contact arrangement codes. Note: • See pages 26 to 28 for contact arrangement codes. • The key cannot be removed in the return position. 6 (14/05/22) TW Series Pushbuttons ø22 Flush / Extended / Extended w/Full Shroud / Mushroom Extended with Full Shroud ABFW2 AOFW2 Momentary Maintained ø29mm Mushroom ABW3 AOW3 Momentary Maintained 37 ø29 48.5 (1-2 blocks) 13 30 68.5 (3-4 blocks) Panel Thickness 1 to 6 37 M3.5 Terminal Screws 48.5 (1-2 blocks) 13 Specify a button color code in place of in the Part No. B: black G: green R: red S: blue W: white Y: yellow 30 68.5 (3-4 blocks) 19 M3.5 Terminal Screws Panel Thickness 1 to 6 37 Maintained Panel Thickness 1 to 6 48.5 (1-2 blocks) 19.5 30 68.5 (3-4 blocks) M3.5 Terminal Screws Panel Thickness 1 to 6 48.5 (1-2 block) 68.5 (3-4 blocks) 37 Momentary M3.5 Terminal Screws ø29 Extended ABW2 AOW2 ABW110 ABW101 ABW111 ABW120 ABW102 ABW122 AOW110 AOW101 AOW111 AOW120 AOW102 AOW122 ABW210 ABW201 ABW211 ABW220 ABW202 ABW222 AOW210 AOW201 AOW211 AOW220 AOW202 AOW222 ABFW210 ABFW201 ABFW211 ABFW220 ABFW202 ABFW222 AOFW210 AOFW201 AOFW211 AOFW220 AOFW202 AOFW222 ABW310 ABW301 ABW311 ABW320 ABW302 ABW322 AOW310 AOW301 AOW311 AOW320 AOW302 AOW322 Dimensions (mm) Code ø29 Maintained 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC Button Color ø29 Momentary Part No. ø24 Flush ABW1 AOW1 Contact ø24 Operation ø24 Shape 13 22.5 30 • Round bezel and shroud (metal): Mat aluminum color • Pushbuttons with one or three contact blocks contain a dummy block. • Other contact arrangements and gold-plated silver contacts are also available. See page 6. (14/05/22) 7 ø22 TW Series Pushbuttons Mushroom / Pushlock Turn Reset / Push Turn Lock / Pushlock Key Reset ø40mm Pushlock Turn Reset AVW4 (Note) ø40mm Push Turn Lock AJW4 2NO ABGW420 2NC ABGW402 2NO-2NC ABGW422 1NO AVW310 1NC AVW301 1NO-1NC AVW311 2NO AVW320 2NC AVW302 2NO-2NC AVW322 1NO AVW410 1NC AVW401 1NO-1NC AVW411 2NO AVW420 2NC AVW402 2NO-2NC AVW422 1NO AJW410 1NC AJW401 1NO-1NC AJW411 2NO AJW420 2NC AJW402 2NO-2NC AJW422 1NO AXW310R 1NC AXW301R 1NO-1NC AXW311R 2NO AXW320R 2NC AXW302R 2NO-2NC AXW322R 37 ø40 Panel Thickness 1 to 6 37 ABGW411 M3.5 Terminal Screw 48.5 (1-2 blocks) 68.5 (3-4 blocks) 30 23 M3.5 Terminal Screws Panel Thickness 1 to 6 Reset Angle 75 48.5 (1-2 blocks) 13 R: red Y: yellow 30 22.5 68.5 (3-4 blocks) M3.5 Terminal Screws Panel Thickness 1 to 6 Reset Angle 75 48.5 (1-2 blocks) 13 68.5 (3-4 blocks) M3.5 Terminal Screws B: black G: green R: red Y: yellow 30 22.5 Panel Thickness 1 to 6 Reset Angle 75 LO H CK ø29mm Pushlock Key Reset AXW3 (Note) 1NO-1NC 30 22.5 37 ø29mm Pushlock Turn Reset AVW3 (Note) B: black G: green ABGW410 R: red S: blue W: white ABGW401 Y: yellow 48.5 (1-2 blocks) 13 68.5 (3-4 blocks) 37 Momentary Specify a button color code in place of in the Part No. 37 1NC Panel Thickness 1 to 6 48.5 (1-2 blocks) 13 68.5 (3-4 blocks) M3.5 Terminal Screws 30 22.5 Panel Thickness Reset 1 to 6 (unlock) Red only 45 37 1NO M3.5 Terminal Screws PU S ø40mm Mushroom w/Full Shroud ABGW4 Dimensions (mm) Code ø29 Maintained ABW410 ABW401 ABW411 ABW420 ABW402 ABW422 AOW410 AOW401 AOW411 AOW420 AOW402 AOW422 Button Color ø46 Momentary 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC Part No. ø29 ø40mm Mushroom ABW4 AOW4 Contact ø40 Operation ø40 Shape 13 48.5 (1-2 blocks) 68.5 (3-4 blocks) 25 47 30 • Round bezel (metal): Mat aluminum color • Pushbuttons with one or three contact blocks contain a dummy block. • Other contact arrangements and gold-plated silver contacts are also available. See page 6. Note: AVW3, AVW4, and AXW3 pushbuttons cannot be used as emergency stop switches. When emergency stop switches are required, use XW or HW series pushbuttons (ISO 13850 and IEC 60947-5-5 compliant). 8 (14/05/22) TW Series Pushbuttons ø22 Pushlock Key Reset / Push-Pull / Square Flush / Square Extended 2NO AXW420R 2NC AXW402R 2NO-2NC AXW422R 1NO AYW410 1NC AYW401 1NO-1NC AYW411 2NO AYW420 2NC Square Flush ABQW1 AOQW1 Momentary Maintained Square Extended ABQW2 AOQW2 Momentary Maintained 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC Red only 45 13 48.5 (1-2 blocks) 25 68.5 (3-4 blocks) M3.5 Terminal Screws 30 47 Panel Thickness 1 to 6 13 48.5 (1-2 blocks) 68.5 (3-4 blocks) AYW402 ABQW110 ABQW101 ABQW111 ABQW120 ABQW102 ABQW122 AOQW110 AOQW101 AOQW111 AOQW120 AOQW102 AOQW122 ABQW210 ABQW201 ABQW211 ABQW220 ABQW202 ABQW222 AOQW210 AOQW201 AOQW211 AOQW220 AOQW202 AOQW222 Reset (unlock) 37 AXW411R Panel Thickness 1 to 6 37 1NO-1NC M3.5 Terminal Screws Specify a button color code in place of in the Part No. B: black G: green R: red S: blue W: white Y: yellow M3.5 Terminal Screws 25 30 30.5 Panel Thickness 1 to 6 37 AXW401R 48.5 (1-2 blocks) 13 30 68.5 (3-4 blocks) M3.5 Terminal Screws Panel Thickness 1 to 6 37 1NC ø40 AXW410R Dimensions (mm) Code ø40 1NO Button Color 25 ø40mm Mushroom Push-Pull AYW4 Part No. 30 ø40mm Mushroom Push Lock Key Reset AXW4 (Note) Contact 30 Operation 25 Shape 48.5 (1-2 blocks) 13 68.5 (3-4 blocks) 20 30 • Round bezel (metal): Mat aluminum color • Square bezel (plastic): Black • Pushbuttons with one or three contact blocks contain a dummy block. • Other contact arrangements and gold-plated silver contacts are also available. See page 6. Note: AXW4 pushbuttons cannot be used as emergency stop switches. When emergency stop switches are required, use XW or HW series pushbuttons (ISO 13850 and IEC 60947-5-5 compliant). Contact Statuses of Push-Pull Switch Contact ø40mm Mushroom Push-Pull Switch Push Pull 1NO 1NC 1NO-1NC 2NO 2NC Note: Push-pull switch can have a maximum of two contact blocks. (14/05/22) 9 ø22 TW Series Pilot Lights Round Flush / Dome / Square Flush Pilot Lights Shape Lamp Round Flush APW1 Round Flush (Marking) APW1B Dome APW2 Square Flush (Marking) APQW1B Part No. Package Quantity: 1 Lens/Illumination Color Code Without Lamp APW199 A: amber, G: green, R: red, S: blue, W: white, Y: yellow LED APW1D A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Incandescent APW1 A: amber, G: green, R: red, S: blue, W: white Without Lamp APW1B99 A: amber, G: green, R: red, S: blue, W: white, Y: yellow LED APW1BD A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Incandescent APW1B A: amber, G: green, R: red, S: blue, W: white Without Lamp APW299 A: amber, G: green, R: red, S: blue, W: white, Y: yellow LED APW2D A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Incandescent APW2 A: amber, G: green, R: red, S: blue, W: white Without Lamp APQW1B99 A: amber, G: green, R: red, S: blue, W: white, Y: yellow LED APQW1BD A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Incandescent APQW1B A: amber, G: green, R: red, S: blue, W: white Designation Code Specify an designation code in place of in the Part No. Operating Voltage Code LED Incandescent 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 16D: 110V DC 66: 88: 33: Input Type 6V AC/DC 12V AC/DC 24V AC/DC Full Voltage Transformer — DC-DC Converter * • Use a pure white LED lamp for yellow illumination. • The white (W) lens of APW1B and APQW1B consists of a clear lens and a white marking plate. • Round bezel (metal): Mat aluminum color Square bezel (plastic): Black ∗ DC-DC converter types are not approved by UL, CSA, and TÜV, and not CE compliant (operating voltage 90 to 140V DC). 10 (14/05/22) TW Series Pilot Lights ø22 Dimensions Round Flush APW1 Transformer, DC-DC Converter 28.5 30 Round Flush Marking APW1B Transformer, DC-DC Converter 28.5 66.5 Marking plate: ø15.5 mm Marking plate: ø15.5 mm 13 30 28.5 66.5 30 25 Dome APW2 Transformer, DC-DC Converter M3.5 Terminal Screw 13 25 28.5 30 16 Panel Thickness 1 to 6 37 30 25 Panel Thickness 1 to 6 Marking plate: 66.5 22 mm 13 16 37 Dome APW2 Full Voltage 13 37 ø23.6 37 ø29 ø23.6 Panel Thickness 1 to 6 M3.5 Terminal Screw 25 28.5 30 17 Dome APW2 Transformer, DC-DC Converter Panel Thickness 1 to 6 28.5 13 ø29 Dome APW2 Full Voltage 37 ø24 37 30 17 Panel Thickness 1 to 6 M3.5 Terminal Screw ø29 ø24 Panel Thickness 1 to 6 13 30 17 ø29 Round Flush Marking APW1B Full Voltage 28.5 13 66.5 17 37 ø24 37 13 30 28.5 Panel Thickness 1 to 6 M3.5 Terminal Screw ø29 ø24 Panel Thickness 1 to 6 ø29 Round Flush APW1 Full Voltage 30 Marking plate: 22 mm Terminal Wiring (Bottom View) • Arrows indicate access directions for wiring. TOP TOP M3.5 X1 M3.5 X1 X2 X2 Full Voltage (14/05/22) Transformer DC-DC Converter 11 ø22 TW Series Illuminated Pushbuttons Round Extended Illuminated Pushbuttons Shape Round Extended ALW2 AOLW2 Operation Lamp Contact 1NO-1NC 2NO 2NO-2NC 1NO-1NC Without Lamp Momentary 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC LED Incandescent 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC Without Lamp Maintained LED Incandescent 2NO 2NO-2NC Part No. ALW29911 ALW29920 ALW29922 ALW211D ALW220D ALW222D ALW21611DD ALW21620DD ALW21622DD ALW211 ALW220 ALW222 (Note) (Note) (Note) AOLW29911 AOLW29920 AOLW29922 AOLW211D AOLW220D AOLW222D AOLW21611DD AOLW21620DD AOLW21622DD AOLW211 AOLW220 AOLW222 (Note) (Note) (Note) Note: DC-DC converter types. Designation Code Specify a designation code in place of or in the Part No. Lens/Illumination Color Code Without Lamp LED Incandescent Operating Voltage Code LED Incandescent 66: 6V AC/DC A: amber G: green R: red S: blue W: white Y: yellow A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Input Type 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 22: 24V AC/DC 33: 24V AC/DC Full Voltage 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC Transformer 386: 380V AC 46: 400/440V AC 486: 480V AC 16D: 110V DC — DC-DC Converter * • Use a pure white LED lamp for yellow illumination. *DC-DC converter types are not approved by UL, CSA, and TÜV, and not CE compliant (operating voltage 90 to 140V DC). 12 (14/05/22) TW Series Illuminated Pushbuttons ø22 Round Extended Illuminated Pushbuttons (Marking) Shape Round Extended (Marking) ALW2B AOLW2B Operation Lamp Contact 1NO-1NC 2NO 2NO-2NC 1NO-1NC Without Lamp Momentary Part No. ALW2B9911 ALW2B9920 ALW2B9922 ALW2B11D ALW2B20D ALW2B22D 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC LED Incandescent 2NO 2NO-2NC 1NO-1NC Without Lamp 2NO 2NO-2NC ALW2B1611DD ALW2B1620DD ALW2B1622DD ALW2B11 ALW2B20 ALW2B22 AOLW2B9911 AOLW2B9920 AOLW2B9922 AOLW2B11D AOLW2B20D AOLW2B22D 1NO-1NC 2NO Maintained 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC LED Incandescent (Note) (Note) (Note) AOLW2B1611DD AOLW2B1620DD AOLW2B1622DD AOLW2B11 AOLW2B20 AOLW2B22 2NO 2NO-2NC (Note) (Note) (Note) Note: DC-DC converter types. Designation Code Specify a designation code in place of or in the Part No. Lens/Illumination Color Code Without Lamp A: amber G: green R: red S: blue W: white Y: yellow LED A: amber G: green PW: pure white R: red S: blue W: white Y: yellow Incandescent A: amber G: green R: red S: blue W: white Operating Voltage Code LED 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 16D: 110V DC Incandescent 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC Input Type Full Voltage Transformer — DC-DC Converter * • Use a pure white LED lamp for yellow illumination. *DC-DC converter types are not approved by UL, CSA, and TÜV, and not CE compliant (operating voltage 90 to 140V DC). (14/05/22) 13 ø22 TW Series Illuminated Pushbuttons Round Extended with Full Shroud Illuminated Pushbuttons Shape Round Extended With Full Shroud ALFW2 AOLFW2 Operation Lamp Without Lamp Momentary LED Contact 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC Incandescent 2NO 2NO-2NC 1NO-1NC Without Lamp 2NO 2NO-2NC 1NO-1NC 2NO Maintained LED Incandescent 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC Part No. ALFW29911 ALFW29920 ALFW29922 ALFW211D ALFW220D ALFW222D ALFW21611DD ALFW21620DD ALFW21622DD ALFW211 ALFW220 ALFW222 (Note) (Note) (Note) AOLFW29911 AOLFW29920 AOLFW29922 AOLFW211D AOLFW220D AOLFW222D AOLFW21611DD AOLFW21620DD AOLFW21622DD AOLFW211 AOLFW220 AOLFW222 (Note) (Note) (Note) Note: DC-DC converter types. Designation Code Specify a designation code in place of or in the Part No. Lens/Illumination Color Code Without Lamp LED Incandescent A: amber G: green R: red S: blue W: white Y: yellow A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 22: 24V AC/DC 33: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 16D: 110V DC — Input Type Full Voltage Transformer DC-DC Converter * • Use a pure white LED lamp for yellow illumination. ∗DC-DC converter types are not approved by UL, CSA, and TÜV, and not CE compliant (operating voltage 90 to 140V DC). 14 (14/05/22) TW Series Illuminated Pushbuttons ø22 Round Extended with Full Shroud Illuminated Pushbuttons (Marking) Shape Round Extended (Marking) With Full Shroud ALFW2B AOLFW2B Operation Lamp Without Lamp Momentary LED 2NO 2NO-2NC 1NO-1NC ALFW2B9920 ALFW2B9922 ALFW2B11D ALFW2B20D ALFW2B22D 2NO Without Lamp LED Part No. ALFW2B9911 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC Incandescent Maintained Contact 1NO-1NC ALFW2B22 AOLFW2B9911 2NO 2NO-2NC 1NO-1NC AOLFW2B9920 AOLFW2B9922 AOLFW2B11D AOLFW2B20D AOLFW2B22D 2NO 2NO-2NC 1NO-1NC (Note) (Note) (Note) ALFW2B20 2NO-2NC 1NO-1NC AOLFW2B1611DD (Note) AOLFW2B1620DD (Note) 2NO-2NC AOLFW2B1622DD (Note) 1NO-1NC 2NO 2NO-2NC AOLFW2B11 AOLFW2B20 AOLFW2B22 2NO Incandescent ALFW2B1611DD ALFW2B1620DD ALFW2B1622DD ALFW2B11 Note: DC-DC converter types. Designation Code Specify a designation code in place of or in the Part No. Lens/Illumination Color Code Without Lamp A: amber G: green R: red S: blue W: white Y: yellow LED A: amber G: green PW: pure white R: red S: blue W: white Y: yellow Incandescent A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 33: 24V AC/DC 22: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 16D: 110V DC — Input Type Full Voltage Transformer DC-DC Converter ∗ • Use a pure white LED lamp for yellow illumination. ∗DC-DC converter types are not approved by UL, CSA, and TÜV, and not CE compliant (operating voltage 90 to 140V DC). (14/05/22) 15 ø22 TW Series Illuminated Pushbuttons Square Extended Illuminated Pushbuttons (Marking) Shape Square Extended (Marking) ALQW2B AOLQW2B Operation Lamp Without Lamp Momentary Contact 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC LED Incandescent 2NO 2NO-2NC 1NO-1NC Without Lamp 2NO 2NO-2NC 1NO-1NC 2NO Maintained LED Incandescent 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC Part No. ALQW2B9911 ALQW2B9920 ALQW2B9922 ALQW2B11D ALQW2B20D ALQW2B22D ALQW2B1611DD ALQW2B1620DD ALQW2B1622DD ALQW2B11 ALQW2B20 ALQW2B22 (Note) (Note) (Note) AOLQW2B9911 AOLQW2B9920 AOLQW2B9922 AOLQW2B11D AOLQW2B20D AOLQW2B22D AOLQW2B1611DD AOLQW2B1620DD AOLQW2B1622DD AOLQW2B11 AOLQW2B20 AOLQW2B22 (Note) (Note) (Note) Note: DC-DC converter types. Designation Code Specify a designation code in place of or in the Part No. Lens/Illumination Color Code Without Lamp LED Incandescent A: amber G: green R: red S: blue W: white Y: yellow A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 33: 24V AC/DC 22: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 16D: 110V DC — Input Type Full Voltage Transformer DC-DC Converter * • Use a pure white LED lamp for yellow illumination. *DC-DC converter types are not approved by UL, CSA, and TÜV, and not CE compliant (operating voltage 90 to 140V DC). 16 (14/05/22) TW Series Illuminated Pushbuttons ø22 Mushroom (ø29) Illuminated Pushbuttons Shape ø29 Mushroom ALW3 AOLW3 Operation Lamp Contact Part No. Without Lamp ALW39911 Incandescent ALW311 Without Lamp AOLW39911 Momentary Maintained AOLW311 Incandescent 1NO-1NC ø29 Mushroom (Marking) ALW3B AOLW3B Without Lamp ALW3B9911 Incandescent ALW3B11 Without Lamp AOLW3B9911 Incandescent AOLW3B11 Momentary Maintained ø29 Mushroom Pushlock Turn Reset AVLW3 Without Lamp LED Incandescent (Note) ø29 Mushroom Pushlock Turn Reset (Marking) AVLW3B Without Lamp LED Incandescent (Note) 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO AVLW39911R AVLW39920R AVLW39922R AVLW311DR AVLW320DR AVLW322DR AVLW311R AVLW320R 2NO-2NC AVLW322R 1NO 1NC 1NO-1NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO AVLW3B9911R AVLW3B9920R AVLW3B9922R AVLW3B11DR AVLW3B20DR AVLW3B22DR AVLW3B11R AVLW3B20R 2NO-2NC AVLW3B22R Designation Code Specify a designation code in place of or in the Part No. Without Lamp A: amber G: green R: red S: blue W: white Y: yellow Lens/Illumination Color Code LED Incandescent A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 22: 24V AC/DC 33: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Input Type Full Voltage Transformer • Use a pure white LED lamp for yellow illumination. Note: TW series pushlock turn reset illuminated pushbuttons cannot be used as emergency stop switches under international safety standards ISO13850 and IEC60947-5. For use as emergency stop switches, use XW or HW series. (14/05/22) 17 ø22 TW Series Illuminated Pushbuttons Mushroom (ø40 mm) Illuminated Pushbuttons Shape ø40 Mushroom Pushlock Turn Reset AVLW4 ø40 Mushroom Pushlock Turn Reset (Marking) AVLW4B ø40 Mushroom Push Pull AYLW4 (2-position maintained) Lamp Without Lamp Full Voltage LED Transformer Incandescent Transformer Without Lamp Full Voltage LED Transformer Incandescent Transformer Without Lamp Incandescent ø40 Mushroom Push Pull (Marking) AYLW4B (2-position maintained) Input Type Without Lamp Incandescent Full Voltage Transformer Full Voltage Transformer Contact 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC 1NO 1NC 1NO-1NC 1NO-1NC 2NO 2NO-2NC 1NO-1NC 2NO 2NO-2NC Part No. AVLW49911R AVLW49920R AVLW49922R AVLW411DR AVLW420DR AVLW422DR AVLW411R AVLW420R AVLW422R AVLW4B9911R AVLW4B9920R AVLW4B9922R AVLW4B11DR AVLW4B20DR AVLW4B22DR AVLW4B11R AVLW4B20R AVLW4B22R 1NO-1NC AYLW49911 2NO AYLW49920 2NO-2NC AYLW49922 1NO-1NC AYLW411 2NO AYLW420 1NO AYLW4B9911 1NC AYLW4B9920 1NO-1NC AYLW4B9922 1NO-1NC AYLW4B11 2NO AYLW4B20 Designation Code Specify a designation code in place of or in the Part No. Without Lamp A: amber G: green R: red S: blue W: white Y: yellow Lens/Illumination Color Code LED Incandescent A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 22: 24V AC/DC 33: 24V AC/DC 16: 100/110V AC 126: 115/120V AC 26: 200/220V AC 246: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Input Type Full Voltage Transformer • Use a pure white LED lamp for yellow illumination. Note: TW series pushlock turn reset illuminated pushbuttons cannot be used as emergency stop switches under international safety standards ISO13850 and IEC60947-5. For use as emergency stop switches, use XW or HW series. Contact Statuses of Push-Pull Switch Contact ø40mm Mushroom Push-Pull Switch Push Pull 1NO 1NC 1NO-1NC 2NO 2NC Note: Push-pull switch can have a maximum of two contact blocks. 18 (14/05/22) TW Series Illuminated Pushbuttons ø22 Dimensions (Operator) Panel Thickness 1 to 6 37 ø24 ø29 37 25 Panel Thickness 1 to 6 ø29 ø24 Panel Thickness 1 to 6 Square Extended (marking) ALQW2B / AOLQW2B 37 Round Extended with Full Shroud (non-marking/marking) ALFW2 / ALFW2B / AOLFW2 / AOLFW2B 30 Round Extended (non-marking/marking) ALW2 / ALW2B / AOLW2 / AOLW2B 13 13 30 19 20 Marking plate: Marking plate: ø15.5mm 21mm Marking plate: ø15.5mm ø29 Mushroom (non-marking/marking) ALW3 / ALW3B / AOLW3 / AOLW3B ø29 Mushroom Pushlock Turn Reset (non-marking/marking) AVLW3 / AVLW3B Panel Thickness 1 to 6 Panel Thickness 1 to 6 ø40 Mushroom Pushlock Turn Reset (non-marking/marking) AVLW4 / AVLW4B Panel Thickness 1 to 6 Reset Angle: 75° Reset Angle 75° 13 30 13 22.5 30 22.5 Marking plate: ø13.9mm Marking plate: ø13.9mm 37 ø40 37 ø29 37 ø29 30 20 30 13 22.5 30 Marking plate: ø13.9mm ø40 Mushroom Push Pull (non-marking/marking) AYLW4 / AYLW4B 37 ø40 Panel Thickness 1 to 6 13 25 30.5 30 All dimensions in mm. Marking plate: ø13.9mm Terminal Arrangement (Lamp Terminal) (Bottom View) • Arrows indicate access directions for wiring. TOP X1 TOP X1 TOP X1 X2 X2 Full Voltage When using TW-DA1B Full Voltage Adapter for 2 or 4 contact blocks (14/05/22) X2 Full Voltage When using HW-DA1B Full Voltage Adapter for 1 or 3 contact blocks Transformer DC-DC Converter 19 ø22 TW Series Illuminated Pushbuttons Dimensions Transformer DC-DC Converter Full Voltage M3.5 Terminal Screws Panel Thickness 1 to 6 M3.5 Terminal Screws Panel Thickness 1 to 6 X1 X1 X2 X2 1 contact block 48.5 When using HW-DA1B full-voltage adapter M3.5 Terminal Screws 2 contact blocks Panel Thickness 1 to 6 86.5 M3.5 Terminal Screws Panel Thickness 1 to 6 X1 X2 X1 X2 2 contact blocks 4 contact blocks 63.5 106.5 When using TW-DA1B full-voltage adapter Panel Thickness 1 to 6 X2 X1 M3.5 Terminal Screws 3 contact blocks 68.5 When using HW-DA1B full-voltage adapter M3.5 Terminal Screws Panel Thickness 1 to 6 X1 X2 4 contact blocks 83.5 When using TW-DA1B full-voltage adapter Note: For push-pull units a maximum of two contact blocks can be used. All dimensions in mm. Contact Configuration and Codes Contact Configuration 1NO 1 block 1NC 1NO-1NC 2 blocks 2NO 2NC 2NO-1NC 1NO-2NC 3 blocks 3NO 3NC 3NO-1NC 2NO-2NC 4 blocks 1NO-3NC 4NO 4NC 20 Code 10 01 11 20 02 21 12 30 03 31 22 13 40 04 (14/05/22) TW Series Selector Switches ø22 10 11 90° 2-position Panel Thickness 1 to 6 (1NO-1NC) 20 (2NO) 22 (2NO-2NC) Contact Code 20 (2NO) 02 (2NC) 22 (2NO-2NC) 40 (4NO) 04 (4NC) 3S Contact Code 4S 4S 3S 4S Contact Block Operator Position Mounting Position L 1 2 1 2 1 2 1 2 3 4 Maintained L Contact NO Contact Block R R 1 2 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 ASW2110 ASW2210 ∗ ASW211 ASW2111 ASW2211 ∗ ASW220 ASW2120 ASW2220 ∗ ASW222 ASW2122 ASW2222 ∗ 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 37 — R L ASW210 — Operator Position Maintained L Contact L NO NO NC NC NO NO NC NC NO NO NO NO NC NC NC NC NO NO NC C R R Spring Return from Right C R L Spring Return from Left Spring Return Two-way C C R L R L ASW320 ASW3120 ASW3220 ASW3320 ASW302 ASW3102 ASW3202 ASW3302 ASW322 ASW3122 ASW3222 ASW3322 ASW340 ASW3140 ASW3240 ASW3340 ASW304 ASW3104 ASW3204 ASW3304 — ASW33S-243 — — Dummy Contact Block Mounting Position R L 30 25 Spring Return from Left C Mounting Position Spring Return from Right Dummy NO NC NO NO NO NC NO NC 13 68.5 (4 blocks) Contact Arrangement Chart (1NO) 45° 3-position M3.5 Terminal Screws 48.5 (2 blocks) Contact Code 30° 5-position / 45° 4-position ASW ø29 Shape ø24 No. of Positions Selector Switches (Knob Operator) Operator Position Maintained Contact NC NC NC NO NO NC NC NO NO NC NC 1 2 3 4 2 3 5 3 1 4 5 Left — ASW44S-411 — ASW43S-461 — Dummy NO NC NC NO — Contact Block Mounting Position and Contact Arrangement Chart 4 ASW44S-407 Maintained 2 1 1 2 3 4 Center L NO NO NC NC • For more contact arrangement chart, see pages 26 to 28. ASW54S-501 C Right Operator Position R 4 3 2 TOP 1 • On the 2-position selector switches marked with ∗ above, the contact operation is reversed as follows. • On the contact arrangement marked with in the table above, the rated current (load switching current) is reduced to a half of the rated current of the contact block. The rated insulation voltage and the rated thermal current remain unchanged. • Selector switches with one or three contact blocks contain a dummy block. • Knob operator: White indicator on black knob (14/05/22) 21 ø22 TW Series Selector Switches Selector Switches (Lever Operator) 11 90° 2-position 37 ø25 10 (1NO-1NC) 20 (2NO) 22 (2NO-2NC) Contact Code 20 (2NO) 02 (2NC) 22 (2NO-2NC) 40 (4NO) 04 (4NC) 3S Contact Code 4S 4S 3S 4S Contact Block Operator Position Maintained L Mounting Position 1 2 1 2 1 2 1 2 3 4 Contact L NO R ASW21L10 ASW22L10 ∗ ASW2L11 ASW21L11 ASW22L11 ∗ ASW2L20 ASW21L20 ASW22L20 ∗ ASW2L22 ASW21L22 ASW22L22 ∗ — Maintained C R Contact L NO NO NC NC NO NO NC NC NO NO NO NO NC NC NC NC NO NO NC C R Spring Return from Right C R L Spring Return from Left Spring Return Two-way C C R L R L ASW3L20 ASW31L20 ASW32L20 ASW33L20 ASW3L02 ASW31L02 ASW32L02 ASW33L02 ASW3L22 ASW31L22 ASW32L22 ASW33L22 ASW3L40 ASW31L40 ASW32L40 ASW33L40 ASW3L04 ASW31L04 ASW32L04 ASW33L04 — — — ASW3L3S-243 Dummy Maintained Contact NC NC NC NO NO NC NC NO NO NC NC 1 2 3 4 2 3 5 3 1 4 5 Left — ASW4L4S-411 — ASW4L3S-461 — Dummy NO NC NC NO Contact Block Mounting Position and Contact Arrangement Chart 4 ASW4L4S-407 Maintained 2 1 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 — R L ASW2L10 Contact Block Operator Position Mounting Position Spring Return from Left L 1 2 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 R 30 25 Contact Block Operator Position Mounting Position Spring Return from Right L R Dummy NO NC NO NO NO NC NO NC 13 68.5 (4 blocks) Contact Arrangement Chart (1NO) 45° 3-position Panel Thickness 1 to 6 48.5 (2 blocks) Contact Code 30° 5-position / 45° 4-position M3.5 Terminal Screws ASW∗L ø29 No. of Positions Shape 1 2 3 4 Center L NO NO NC NC C Right 4 • For more contact arrangement chart, see pages 26 to 28. 3 — Operator Position R ASW5L4S-501 2 TOP 1 • On the 2-position selector switches marked with ∗ above, the contact operation is reversed as follows. • On the contact arrangement marked with in the table above, the rated current (load switching current) is reduced to a half of the rated current of the contact block. The rated insulation voltage and the rated thermal current remain unchanged. • Selector switches with one or three contact blocks contain a dummy block. • Lever operator: White indicator on black lever 22 (14/05/22) TW Series Selector Switches ø22 Key Selector Switches Contact Arrangement Chart Mounting Position 1 2 1 2 1 2 1 2 3 4 10 11 (1NO-1NC) 20 (2NO) 22 (2NO-2NC) Contact Code Maintained Contact L NO L R 1 2 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 20 (2NO) 02 (2NC) 22 (2NO-2NC) 40 (4NO) 04 (4NC) 3S Spring Return from Left ASW2K10 ASW21K10 ASW22K10 ∗ ASW2K11 ASW21K11 ASW22K11 ∗ ASW2K20 ASW21K20 ASW22K20 ∗ ASW2K22 ASW21K22 ASW22K22 ∗ — R L — Maintained Contact Block Operator Position Mounting Position R L R 30 41 Dummy NO NC NO NO NO NC NO NC Spring Return from Right 37 13 19 68.5 (4 blocks) Contact Block Operator Position (1NO) 90° 2-position Panel Thickness 1 to 6 48.5 (2 blocks) Contact Code 45° 3-position M3.5 Terminal Screws ø29 ASW∗K ø24 No. of Positions Shape Contact L NO NO NC NC NO NO NC NC NO NO NO NO NC NC NC NC NO NO NC L C R C Spring Return from CRight R R L Spring Return fromC Left R L Spring Return Two-way C R L ASW3K20 ASW31K20 ASW32K20 ASW33K20 ASW3K02 ASW31K02 ASW32K02 ASW33K02 ASW3K22 ASW31K22 ASW32K22 ASW33K22 ASW3K40 ASW31K40 ASW32K40 ASW33K40 ASW3K04 ASW31K04 ASW32K04 ASW33K04 — — — ASW3K3S-243 Dummy • On the spring-returned types, the key can be released only from the maintained position. On the maintained types, the key can be released from every position. Key retained positions are also available. See page 6. • On the 2-position selector switches marked with ∗ above, the contact operation is reversed as follows. • On the contact arrangement marked with in the table above, the rated current (load switching current) is reduced to a half of the rated current of the contact block. The rated insulation voltage and the rated thermal current remain unchanged. • Key selector switches with one or three contact blocks contain a dummy block. • Cylinder cover: Black, Cylinder: Metal Contact Block Mounting Position and Contact Arrangement Chart 4 3 1 2 Left Center Right TOP 1 2 3 4 L NO NO NC NC C R Operator Position • For more contact arrangement chart, see pages 26 to 28. (14/05/22) 23 ø22 TW Series Illuminated Selector Switches Illuminated Selector Switches 90° 2-position M3.5 Terminal Screws Panel Thickness 1 to 6 A: 63.5 (2 blocks) 83.5 (4 blocks) B: 86.5 (2 blocks), 106.5 (4 blocks) Contact Arrangement Chart Contact Code Contact Block Mounting Contact Position 11 (1NO-1NC) 20 (2NO) 1 NO 2 NC 22 L Lamp L R 30 25 A: Rated voltage 24V AC/DC B: Rated voltage 100/110V AC, 200/220V AC Spring Return from Right L 37 13 R Spring Return from Left L R R Without Lamp ASLW29911 ASLW219911 ASLW229911 LED ASLW211D ASLW2111D ASLW2211D Incandescent ASLW211 ASLW2111 ASLW2211 1 NO Without Lamp ASLW29920 ASLW219920 ASLW229920 2 NO LED ASLW220D ASLW2120D ASLW2220D Incandescent ASLW220 ASLW2120 ASLW2220 Without Lamp ASLW29922 ASLW219922 ASLW229922 LED ASLW222D ASLW2122D ASLW2222D Incandescent ASLW222 ASLW2122 ASLW2222 1 2 3 4 (2NO-2NC) Maintained Operator Position ø29 ASLW ø24 Shape NO NC NO NC Designation Code Specify a designation code in place of or in the Part No. Without Lamp Lens/Illumination Color Code LED Incandescent A: amber G: green R: red S: blue W: white Y: yellow A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 22: 24V AC/DC 33: 24V AC/DC 16: 100/110V AC 136: 115/120V AC 26: 200/220V AC 256: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Input Type Full Voltage Transformer Contact Block Mounting Position and Contact Arrangement Chart 4 2 Left TOP Right L 3 1 1 2 3 4 NO NC NO NC R Operator Position • For more contact arrangement chart, see pages 26 to 28. 24 (14/05/22) TW Series Illuminated Selector Switches ø22 Illuminated Selector Switches 45° 3-position Contact Block Contact Code Mounting Contact Position 20 (2NO) 02 (2NC) 22 (2NO-2NC) 1 NO 2 NO 40 04 C L C R L R R Spring Return from left C L R Spring Return Two-way C L R Without Lamp ASLW39920 ASLW319920 ASLW329920 ASLW339920 LED ASLW320D ASLW3120D ASLW3220D ASLW3320D Incandescent ASLW320 ASLW3120 ASLW3220 ASLW3320 NC Without Lamp ASLW39902 ASLW319902 ASLW329902 ASLW339902 2 NC LED ASLW302D ASLW3102D ASLW3202D ASLW3302D Incandescent ASLW302 ASLW3102 ASLW3202 ASLW3302 1 2 3 4 NO NO NC NC Without Lamp ASLW39922 ASLW319922 ASLW329922 ASLW339922 LED ASLW322D ASLW3122D ASLW3222D ASLW3322D Incandescent ASLW322 ASLW3122 ASLW3222 ASLW3322 Without Lamp ASLW39940 ASLW319940 ASLW329940 ASLW339940 LED ASLW340D ASLW3140D ASLW3240D ASLW3340D Incandescent ASLW340 ASLW3140 ASLW3240 ASLW3340 Without Lamp ASLW39904 ASLW319904 ASLW329904 ASLW339904 LED ASLW304D ASLW3104D ASLW3204D ASLW3304D Incandescent ASLW304 ASLW3104 ASLW3204 ASLW3304 NO NO NO NO 1 2 3 4 (4NC) L Lamp Spring Return from Right C 1 1 2 3 4 (4NO) Maintained Operator Position NC NC NC NC Designation Code Specify a designation code in place of or in the Part No. Without Lamp Lens/Illumination Color Code LED Incandescent A: amber G: green R: red S: blue W: white Y: yellow A: amber G: green PW: pure white R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Operating Voltage Code LED Incandescent 66: 6V AC/DC 66: 6V AC/DC 11: 12V AC/DC 88: 12V AC/DC 22: 24V AC/DC 33: 24V AC/DC 16: 100/110V AC 136: 115/120V AC 26: 200/220V AC 256: 230/240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Input Type Full Voltage Transformer Contact Block Mounting Position and Contact Arrangement Chart 4 3 1 2 Left TOP 1 2 3 4 Center L NO NO NC NC C Right R Operator Position • For more contact arrangement chart, see pages 26 to 28. (14/05/22) 25 ø22 TW Series Selector Switch Contact Arrangement Charts 90° 2-position (Maintained / Spring Return) Maintained Positions L R Operator Contact Code L 01 — 11 (1NO-1NC) — 103 20 — 02 — (2NO) (2NC) — 109 22 (2NO-2NC) 110 111 117 31 (3NO-1NC) 40 (4NO) 107 — 118 168 2R 119 169 120 170 4R 121 171 26 R L L R Operator Positions Circuit Mounting Contact No. Position — (1NC) Spring Return from Left Knob, Lever, Key, Illuminated 10 (1NO) Spring Return from Right 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 1 2 1 2 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 NO R L R Dummy NC Dummy NO NC NC NO NO NO NC NC NO NC NO NC NO NC NC NO NC NO NC NO NO NO NC NC NC NO NO NC NC NO NO NO NO NO NO NO NO NO NO NC NC NO NC NO NO NC NO NC NO NC NO NC NC NO NC NO NC NO NC NO Contact Block Mounting Position and Contact Arrangement Chart 4 TOP 2 3 1 Left Right L 1 2 3 4 NO NC NO NC R Operator Position • On the contact arrangement marked with in the table, the rated current (load switching current) is reduced to a half of the rated current of the contact block. The rated insulation voltage and the rated thermal current remain unchanged. Part No. Development • When circuit number is not required: ASW 2 11 Contact Code (1NO-1NC) 2-position • When circuit number is required: ASW 2 11 - 103 Circuit No. Contact Code (1NO-1NC) 2-position (14/05/22) TW Series Selector Switch Contact Arrangement Charts ø22 45° 3-position (Maintained / Spring Return) Maintained Positions L Circuit Mounting Contact No. Position 203 11 302 303 — 20 301 — 02 304 — 210 22 308 309 310 206 31 (3NO1NC) 207 212 13 313 — 40 305 — 04 314 (14/05/22) L R L R Knob, Lever, Key, Illuminated 202 (2NO2NC) R L C C C R Operator Contact Code Spring Return Spring Return Spring Return from Right from Left Two-way C 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 NO NC NC NO NO NC NC NO NO NO NO NO NC NC NC NC NO NO NC NC NC NO NC NO NO NC NO NC NO NC NC NO NC NO NC NO NO NC NO NO NC NO NO NO NO NC NC NC NC NO NC NC NO NO NO NO NO NO NO NO NC NC NC NC NC NC NC NC Operator Positions L C R Contact Block Mounting Position and Contact Arrangement Chart 4 TOP 2 3 1 Left 1 2 3 4 Center L NO NO NC NC C Right R Operator Position Part No. Development • When circuit number is not required: ASW 3 22 Contact Code (2NO-2NC) 3-position • When circuit number is required: ASW 3 22 - 210 Circuit No. Contact Code (2NO-2NC) 3-position 27 ø22 TW Series Selector Switch Contact Arrangement Charts 45° 3-position (Maintained) 45° 4-position (Maintained) Maintained Maintained L 2 Positions C Positions R 1 3 4 Operator Contact Code 2S 3S Circuit No. 1361 243 233 234 4S 235 237 240 Mounting Contact Position 1 2 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 NO NC NO NO NC Knob, Lever, Key, Illuminated Operator Positions L C Operator Contact Code Mounting Contact Position R 3S 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 461 405 Dummy NO NC NC NO NO NC NC NC NC NO NC NO NO NO NC NO NC NC NC NO Circuit No. 407 4S 409 411 Knob, Lever Operator Positions 1 NO NC NC Dummy NC NC NC NC NC NC NC NO NO NC NC NC NO NC NC NO 30° 5-position (Maintained) Maintained Positions Contact Code Maintained 2 4S 1336 1337 4S 1352 1355 1359 28 Circuit No. 1 2 3 4 Mounting Contact Position 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 NO NO NC NC NC NO NC NC NO NC NC NO NO NC NO NC NC NC NC NC 501 Knob, Lever, Key, Illuminated Operator Positions L C 4 R 2 1 NO NC NC NO 3 5 1 2 3 4 5 TOP Left 4 Knob, Lever Operator Positions Mounting Contact Position R L 3 1 C Positions Circuit No. 4 45° 3-position (Maintained) Contact Code 3 Operator Operator 2 1 2 3 4 Center L NO NO NC NC C Right R Operator Position • On the contact arrangement marked with in the table, the rated current (load switching current) is reduced to a half of the rated current of the contact block. The rated insulation voltage and the rated thermal current remain unchanged. (14/05/22) TW Series Accessories and Replacement Parts ø22 Terminal Covers Terminal Cover HW-VL2 HW-VL3 HW-VL4 HW-VL5 HW-VL6 APS-PVL Use of terminal covers increases the depth by the dimen sions below. Terminal Cover Switch/Pilot Light • Pilot light APW APQW 39.8H × 14.1W 39.8H × 8.7W 39.1H × 15.5W Full Voltage • Pushbutton 1 contact block ABW AOW CB Terminal Cover AVW ABQW ABFW 2 contact blocks AJW AOQW CB AOFW CB AXW ABGW AYW 3 contact blocks CB CB CB 40H × 14.8W 36H × 29.4W X Transformer DC-DC Converter • Selector switch ASW 37.8H × 26W X +6mm +3mm X X 2 pieces +3.5mm X 2 pieces 4 contact blocks CB CB CB CB • Illuminated pushbutton ALW AOLW ALFW AOLFW ALQW AOLQW AVLW AYLW Full Voltage, 1 or 3 contact blocks CB FA X 2 pieces X 2 pieces +3.5mm Full Voltage, 2 or 4 contact blocks X For con tact blocks 2 pieces CB CB • Illuminated Transformer selector DC-DC Converter switch ASLW CB CB Tr X X For full voltage adapter +3mm +3mm Ordering Terminal Covers Terminal covers are ordered separately. When ordering terminal covers, specify the Part No. and required quantity. (14/05/22) 29 ø22 TW Series Accessories and Replacement Parts Nameplates Dimensions (mm) Legend Material Part No. NWA 20 29 NWA-0 Blank Aluminium 0.8 mm thick OFF With Legend NWA-∗ NWAQ NWAQ-0 Blank Aluminium 0.8 mm thick OFF With Legend 14.5 21 29 NWAQ-∗ Ordering No. Package Quantity NWA-0 1 NWA-0PN10 10 NWA-∗ 1 NWA-∗PN10 10 NWAQ-0 1 NWAQ-0PN10 10 NWAQ-∗ 1 NWAQ-∗PN10 10 NWAS-0 1 Description Black White letters on black background Black White letters on black background NWAS 45 45 Blank Aluminium 0.8 mm thick NWAS-0 Black NWAS-0PN10 10 NWAL-0 1 NWAL 29 25 Blank Aluminium 0.8 mm thick NWAL-0 Black NWAL-0PN10 10 NWAQL-0 1 NWAQL 29 25 Blank Aluminium 0.8 mm thick NWAQL-0 Black 14.5 NWAQL-0PN10 10 • Specify a legend code in place of ∗ in the Ordering No. Legends Code 0 1 2 3 4 31 35 53 30 Legend (blank) ON OFF START STOP OFF-ON HAND-AUTO HAND-OFF-AUTO (14/05/22) TW Series Accessories and Replacement Parts ø22 Accessories Material Part No. Ordering No. Package Quantity Locking Ring Wrench Dimensions OR-14 OR-14 1 90 ø34 Rubber (nitryl) ø31 • Used to tighten the round bezel when installing the TW switch/pilot light onto a panel. ø46 Shape 16 For ø22mm units (close mounting) For ø22/ø25mm units Lamp Holder Tool OR-55 OR-55 1 ø14 Rubber (nitryl) ø11.6 • Used to install and remove LED/incandescent lamps. 59 Contact Block Removal Tool TW-KC1 TW-KC1 1 130 Nut Locking Wrench 39 ø19 Metal (zinc-plated) Rubber (nitryl) 23 • Used to remove contact blocks, transformers, lenses and adapters. Can also be used to determine panel thickness adjustment. • Used to tighten the locking nuts inside of the square bezel.This tool can be inserted into the OR-14 locking ring wrench. 20 TW-KQ2 1 25.7 TW-KQ2 22.5 Metal (nickel-plated) 80 Anti-rotation Ring • Used to prevent the operator from rotating. Generally used when using no nameplates on selector switches. OGL-31 OGL-31PN10 10 10.2 Metal (zinc-plated) ø22 Rubber Mounting Hole Plug ø27.4 0.8 • Used to plug unused ø22.2mm mounting holes. ø29 5 Diecast Metal (locking ring: polyamide) LW9Z-BM LW9Z-BM 1 • Used to plug unused ø22.2mm mounting holes. • Tightening torque: 1.2 N·m • Degree of protection: IP66 (without the 3.2mm recess in the mounting hole) ø25.8 12 Gasket Locking Ring Plastic (polyamide) LW9Z-BP1 LW9Z-BP1 1 Barrier Polyamide HW-VL1 HW-VL1PN10 10 • Used to plug the unused ø22.2mm mounting holes. • Tighten the locking ring to a torque of 2.0 N·m. IP65 • Mounting panel thickness: 0.8 to 6 mm • Used to prevent contact between adjacent lead wires when units are mounted closely. Barriers should be always used in close mounting. 45 Plastic Mounting Hole Plug 20 (14/05/22) 3 Metallic Mounting Hole Plug ø25 3.5 OB-31PN05 3.5 Rubber (black) OB-31 (nitryl) 1.5 31 ø22 TW Series Accessories and Replacement Parts Accessories OCW-99 Ordering No. OCW-99 Package Quantity 1 Description • Oiltight rubber boot used for pushbuttons and selector switches. • Temperature range: –5 to +60°C • Black OCW-99 2.2 For 1 layer of contact blocks (2 contact blocks) Part No. Rubber (nitryl) 1 OCW-299 OC-31 OC-31 1 OC-32 OC-32 1 Rubber (EPDM) For extended pushbuttons (ABW2/AOW2) Button Cover For flush pushbuttons (ABW1/AOW1) OCW-10 OCW-10 1 65.5 14 38 • Used to cover and protect pushbuttons where units are subject to water splash. Not suitable for outdoor use or where the units are subject to oil splash. ø32.6 18 (OC-31) 22 (OC-32) • Metallic bezels covered with rubber boot to enhance waterproof and oiltight characteristics. • Button is installed in the cover. Remove the button from the pushbutton before using the button cover. • : B (black), G (green), R (red), Y (yellow) ø32 For extended pushbuttons (ABW2/AOW2) OCW-11 OCW-11 M22 P1.0 1 18.5 Button installed Button installed 21 Extended Flush Padlock Cover 9 ø31 9 M22 P1.0 ø26 Rubber (nitryl) • Used to protect momentary and maintained pushbuttons, illuminated pushbuttons, knobs selector switches, and key selector switches. 82.5 1 70 30 HW9Z-KL1 HW9Z-KL1 6.5 R6 Polyarylate (gasket: nitryl rubber) Panel Thickness 0.8 to 3.2 93 For flush pushbuttons (ABW1/AOW1) OCW-299 ø31 Button Clear Boot OCW-299 50 For 2 layers of contact blocks (4 contact blocks) 45.5 14 38 ø32 Contact Rubber Boot Material 48 Shape 24 (inside) 2 2. Padlock Cover for Key Selector Switches ø2 ) 0 4 ø5 44. :ø (ID Key hole ø8 29.5 30 Waterproof Rubber Gasket 0.5t • For ASWK key selector switches. Metal (copper) HS9Z-PC22 HS9Z-PC22 1 Note: Specify a button color code or lens color code in place of or in the Ordering No. 32 (14/05/22) TW Series Accessories and Replacement Parts ø22 Accessories Shape Material ø40mm Lens Part No. Ordering No. Package Quantity ALW4L- ALW4L- 1 ALW4LD- ALW4LD- 1 ALW4BL- ALW4BL- 1 Non-marking Plastic Marking Plastic Bezel ➊ ➋ ➌ ➍ ➎ Selector Operator ➋ ➊ ➌ ➍ W (white) : G (green), R (red), S (blue), W (white) AW-RP1BPN05 5 AW-FP1B AW-FP1B 1 AW-FP2B AW-FP2B 1 AW-H1B AW-H1B 1 AW-Q1B AW-Q1B 1 AW-QF1B AW-QF1B 1 AW-R1 AW-R1PN05 5 Aluminium color (standard) AW-R1B AW-R1B 1 Black AW-F1 AW-F1 1 (for illuminated pushbuttons) AW-F2 AW-F2 1 ➍Mushroom AW-G4 AW-G4 1 ➊Flush Aluminium : A (amber) Black Aluminium color (standard) ➊Knob ASWHHY-➁ ASWHHY-➁PN02 2 ➋Lever ASWHHL-➁ ASWHHL-➁PN02 2 Specify a color code in place of ➁. B (black), G (green), R (red) ➌Round ASWHHM-B ASWHHM-BPN02 2 Black only TW-HC1➁ TW-HC1➁PN05 5 Specify a color code in place of ➁. B (black), G (green), R (red), S (blue), W (white), Y (yellow) ASLWDDY-➁ ASLWDDY-➁ 1 Specify a color code in place of ➁. A (amber), W (white), Y (yellow) ASLWLDY-➁ ASLWLDY-➁ 1 Specify a color code in place of ➁. G (green), R (red), S (blue) ➍Color Insert ➎ : A (amber), AW-RP1B ➋Extended ➌Extended ➍ S (blue) ➋Extended ➌Extended Aluminium Bezel ➌ ➊Flush ➎Square ➏Extended ➋ • Applicable unit: ALW3B, AOLW3B • Marking plate is included : G (green), R (red), 1 with Full Shroud ➊ • Applicable unit: ALW3, AOLW3 ALW4BLD- ALW4BLD- (for illuminated pushbuttons) ➍Square round Plastic (for round pushbuttons) ➎ Remarks Plastic ➎Illuminated selector Metal Protector • Used to protect flush pushbuttons from inadvertent operation. Metal OLW-C OLW-C 1 Mounting Centers 50 min. 18.6 ø22.5 (14/05/22) R4 2.5 15 1.6t 33 ø22 TW Series Accessories and Replacement Parts Maintenance Parts Shape Lens (for pilot lights) Material AS Round flush AS, Marking Round extended AS Square flush AS, Marking Lens (for illuminated pushbuttons) AS Round extended AS, Marking Square extended Lens (for pushlock turn reset) AS AS ø29mm mushroom AS, Marking APW1L-PN05 5 G (green), R (red), S (blue) APW1LD- APW1LD-PN05 5 A (amber), W (white), Y (yellow) APW11L- APW11L-PN05 5 C (clear), G (green), R (red), S (blue) APW11LD- APW11LD-PN05 5 A (amber), Y (yellow) APW2L- APW2L-PN05 5 G (green), R (red), S (blue) APW2LD- APW2LD-PN05 5 A (amber), W (white), Y (yellow) APQW11L- APQW11L-PN05 5 C (clear), G (green), R (red), S (blue) 5 A (amber), Y (yellow) APQW11LD- APQW11LD-PN05 ALW2L- ALW2L-PN05 5 G (green), R (red), S (blue) ALW2LD- ALW2LD-PN05 5 A (amber), W (white), Y (yellow) ALW21L- ALW21L-PN05 5 C (clear), G (green), R (red), S (blue) ALW21LD- ALW21LD-PN05 5 A (amber), Y (yellow) ALQW21L- ALQW21L-PN05 5 C (clear), G (green), R (red), S (blue) ALQW21LD- ALQW21LD-PN05 5 A (amber), Y (yellow) ALW3L- ALW3L-PN02 2 G (green), R (red), S (blue) ALW3LD- ALW3LD-PN02 2 A (amber), W (white), Y (yellow) ALW31L- ALW31L-PN02 2 C (clear), G (green), R (red), S (blue) A (amber), Y (yellow) ALW31LD-PN02 2 AVLW3L-RPN02 2 AS, Marking AS AVLW31L-R AVLW31L-RPN02 2 AVLW4L-R AVLW4L-RPN02 2 Round flush ABW1B- ABW1B-PN05 5 Round extended ABW2B- ABW2B-PN05 5 Square flush ABQW1B- ABQW1B-PN05 5 Square extended ABQW2B- ABQW2B-PN05 5 B (black) G (green) R (red) S (blue) W (white) Y (yellow) ABW3B- ABW3B-PN02 2 ABW4B- ABW4B-PN02 2 AVW3B- AVW3B-PN02 2 R (red), Y (yellow) AVW4B- AVW4B-PN02 2 R (red), Y (yellow) ø40mm push pull AYW4B- AYW4B-PN02 2 B (black), G (green), R (red), S (blue), W (white), Y (yellow) Round flush APW2B APW2BPN05 5 Square flush APQW1B APQW1BPN05 5 ALW2B ALW2BPN05 5 Square extended ALQW2B ALQW2BPN05 5 ø29/40mm mushroom ALW3B ALW3BPN05 5 APW00LN APW00LNPN05 5 APW00L APW00LPN05 5 ø29mm mushroom Waterproof Lens Color Code APW1L- ALW31LD- ø40mm mushroom ø29mm pushlock turn reset ø40mm pushlock turn reset Marking Plate (for illuminated pushbuttons) Package Quantity AVLW3L-R ø40mm mushroom Marking Plate (for pilot lights) Ordering No. AS ø29mm mushroom Button Part No. Round extended Polyacetal Acrylic For APQW • White Acrylic For ALQW Note: Specify a button color code or lens color code in place of or in the Ordering No. Use a clear lens for white or pure white illumination. 34 (14/05/22) TW Series Accessories and Replacement Parts ø22 Maintenance Parts Shape Specification Contact Block Part No. Ordering No. Package Quantity Housing Remarks Push Rod 1NO contact HW-C10 HW-C10 1 Blue Green 1NC contact HW-C01 HW-C01 1 Purple red Red HW-C10R HW-C10R 1 Blue Black HW-C01R HW-C01R 1 Purple red White TW-DB 10 • Used for non-illuminated units with 1NO or 1NC contact blocks. • Black 2 • Adapter with M3.5 screws used for illuminated pushbutton or illuminated selector switch. Snaps on to the back of the contact block. • Used with 2 or 4 contact blocks. • Black HWHW-DA1B DA1BPN02 2 • Adapter with M3.5 screws used for illuminated pushbuttons or illuminated selector switch. • Used with 1 or 3 contact blocks. • Black Metal TW-SK-0 TW-SK-0PN02 2 • For Key Selector Switch • For Pushlock Key Reset Current Draw AC DC Part No. Ordering No. EM contact (early make) LB contact (late break) Dummy Block TW-DBPN10 Full Voltage Adapter (for 2 or 4 contact blocks) TW-DA1B TW-DA1BPN02 Full Voltage Adapter (for 1 or 3 contact blocks) Spare Key LED Lamps (LSTD) Dimensions Operating Voltage 6V AC/DC ±5% 8 mA 2.4 12V AC/DC ±10% (20.8) 18.4 Voltage Base (x2) BA9S/13 Grommet (x1) 24V AC/DC ±10% 7 mA (A, R, W) LSTD-6 5.5 mA (G, PW, S) LSTD-6 LSTD-6PN10 LSTD-1 11 mA 10 mA LSTD-1 LSTD-1PN10 LSTD-2 11 mA 10 mA LSTD-2 LSTD-2PN10 Illumination Color Code Specify a color code in place of in the Ordering No. A: amber G: green PW: pure white R: red S: blue W: white Use a pure white (PW) LED lamp with yellow (Y) lens. Package Quantity Base 1 10 1 BA9S/13 10 1 10 Incandescent Lamps (LS) Dimensions Rated Operating Voltage Lamp Ratings Part No. 6V AC/DC 1W (6.3V) LS-6 12V AC/DC 1W (18V) LS-8 1 (14/05/22) ø11±1 Base BA9S/13 22.5 ±1.5 Package Quantity 18V AC/DC 1W (24V) LS-2 24V AC/DC 1W (30V) LS-3 35 ø22 TW Series Accessories and Replacement Parts Transformer Unit Shape Transformer Unit Primary Voltage Secondary Voltage Part No. TW-T16B 100/110V AC 120V AC TW-T126B 5.5V 200/220V AC TW-T26B TW-T246B 240V AC Transformer Shape Secondary Voltage Primary Voltage Din Rail Mount Transformer For 6V Part No. 100/110V AC TWR516 115/120V AC TWR5126 200/220V AC TWR526 230/240V AC Applicable Load LSTD-6 LED lamp (6V AC/DC) or LS-6 incandescent lamp (6V AC/DC, 1W) TWR5246 5.5V AC, 1W 380V AC TWR5386 400/440V AC TWR546 480V AC TWR5486 Specifications Dimensions 3 Shock Resistance Dielectric Strength Terminal Screw Applicable Wire Weight (approx.) 22 30 2 Primary Side 40 48 2–ø3.3 Mounting Hole 52 Terminal Cover 40 41 45.5 100 MΩ minimum (500V DC megger) –30 to +60°C (no freezing) –40 to +80°C (no freezing) 35 to 85% RH (no condensation) Damage Limits: 30 Hz, amplitude 1.5 mm Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Damage limits, Operating Extremes: 1,000 m/s2 2,500V AC, 1 minute M3.5 2 mm2 maximum, 2 wires maximum 87g Vibration Resistance JAPAN Secondary Side 600V PRI. Current Draw Rated Insulation Voltage Insulation Resistance Operating Temperature Storage Temperature Operating Humidity M3.5 Terminal Screw 1 Operating Voltage SEC. 4 100/110V AC, 115/120V AC, 200/220V AC, 230/240V AC, 380V AC, 400/440V AC, 480V AC (50/60Hz) 2.4 VA BAA1000 Accessories DIN Rail Part No. BAA1000 BAP1000 Ordering No. BAA1000PN10 BAP1000PN10 Length 1000 mm 1000 mm Weight (approx.) 200g 320g Material Aluminum Steel Package Quantity 10 10 End Clip BNL6 Ordering No. BNL6PN10 Applicable DIN Rail BAA1000 BAP1000 Weight (approx.) 15g Material Package Quantity Steel (Zinc-plated) Dimensions (24) Part No. 10 45 9 • Use plastic end clip BC9Z-E/NS35N when using 400/440V AC primary voltage transformers. 36 (14/05/22) TW Series Instructions ø22 Safety Precautions • Turn off the power to the TW series switches & pilot lights before starting installation, removal, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard. • To avoid a burn on your hand, use the lamp holder tool when replacing lamps. • For wiring, use wires of a proper size to meet the voltage and current requirements. Tighten the M3.5 terminal screws to a tightening torque of 1.0 to 1.3 N·m. Failure to tighten terminal screws may cause overheat and fire. • Use HW-C contact blocks for the TW series. Do not replace with or add conventional TW series contact blocks. Using a different type of contact block may lead to malfunction. TW Contact Block HW-C Contact Block Rectangular Holes Instructions Panel Mounting Panel thickness adjustment ring is used for the TW series. To attach the TW series to the panel, follow the procedures below. Panel Thickness Adjustment Attaching the Unit to the Panel with the Bezel Attaching the Button, Lens, and Knob Bezel Mounting order Panel thickness adjustment ring Panel Lens Panel Installation method Type Attach the unit with the panel thickness scale facing up. Remarks Method Flush/Extended pushbuttons, Square lens, Selector operator Press in 29mm/40mm mushroom button/lens, Dome lens Screw in For tightening or removing round bezels. Locking ring wrench For tightening or removing square bezels. Tools Nut locking wrench Contact block removal Panel thickness adjustment tool Adjusting Panel Thickness The panel thickness ring provides adjustment from 1 to 6 mm in 1-mm increments. Set the panel thickness to line A. Rotate the ring until the desired thickness indication around the periphery is aligned with line A, as shown below. For installing or removing water proof lenses after the bezel is attached. For installing or removing round lenses. Using the Contact Block Removal Tool to Adjust Panel Thickness Panel thickness can easily be adjusted to the values shown below by inserting the contact block removal tool between the adjustment ring and base. Scale on Adjustment (in 0.1 mm) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1.6 mm 0.1 mm 2.3 mm 1 2 3 4 5 1 mm Contact Block Removal Tool Panel Thickness Adjustment Ring Panel Thickness Scale (in 1 mm on the operator) 3.5 mm 6 A 3 5 2 4 6 Ex. Panel thickness 2 mm 3 5 4 6 Ex. Panel thickness 2.6 mm 1 mm 2 mm 3.2 mm Note: When a nameplate or an anti-rotation ring is used, add 0.8mm to the panel thickness. Total thickness = Panel thickness + 0.8mm (nameplate or anti-rotation ring thickness) (14/05/22) 37 ø22 TW Series Instructions Mounting into Panel Cut-out with Bezel Insertion into Panel Cut-out Insert the base into the panel cut-out making sure that the panel thickness scale is facing up. Square Bezel 1. Insert the base plate from the front. Base Plate Panel thickness adjustment ring 2. Insert the lock nut. For easy installation, use the nut locking wrench. Round Bezel All round bezels are screw-in type. Be sure to use the locking ring wrench to tighten the bezel. Locking Ring Wrench OR-14 (optional) Remove Tighten Side A Nut Locking Wrench TW-KQ2 (optional) 3. Mount the square bezel. The bezel will snap onto the base plate. Use side B when mounting the units closely. Side B Lock Nut Square Bezel • Recommended tightening torque is 2.0 N·m. Use side B when mounting units closely. 5 Marking Plate [Square Illuminated Pushbutton] Marking Plate Flat screwdriver (5mm wide at maximum) 2. Removing the Marking Plate • Pilot Light Insert the screwdriver into the recess of the lens. Square (Illuminated Pushbutton) 19 21 21 9 0. 3 1.0 ø1 4.4 ø1 Square (Pilot Light) 2.6 Insert Square Lens 1. Removing the Square Lens Insert the screwdriver into the recess of the lens and lightly push out the lens. Mushroom 1. 4 [Square Pilot Lens] Square Lens Press in Round 1.2 Lens Structure and Marking Plate All square lens units are marking types. To engrave on the marking plate, remove the marking plate from the lens. Marking Plate Engraving Area 22 Installing Buttons, Lenses, and Operators Note: The depth of the engraving must be within 0.5 mm. Installing Round Lens and Waterproof Lens When installing or removing round lens of pilot lights and illuminated pushbuttons and waterproof lens of square pilot lights and illuminated pushbuttons, press the rubber part of the contact block removal tool onto the lens or waterproof lens for secure tightening and easy removal. Small flat screwdriver Lens Retainer Waterproof Lens • Illuminated Pushbuttons Insert the screwdriver into the hook and lightly push out the lens. Flat screwdriver (5mm wide at maximum) [Round Marking] Lens Marking Plate Press in 38 3. Other Notes The square lens of the illumi nated pushbutton cannot be used without waterproof lens. Always use the waterproof lens. Be sure to use the marking plate even when it is not engraved. (14/05/22) TW Series Instructions ø22 Installation of Selector Operators 1. The shaft of each selector or illuminated selector switch has a recess to identify in which direction to install the operator. Align the operator with the recess and press in the operator. 2. Press color insert (non-illuminated) into the operator. The color insert retains the operator Removing the Operator Recess Flat screwdriver Color insert Recess 1. Removing the Color Insert Insert a flat screwdriver into the recess of the color insert. Turn the screwdriver to push out the insert from the operator Press in 2. Removing the Operator (Non-illuminated) Push the operator sideways as shown in the left photo to remove the operator. Press in Illuminated Selector Switch Selector Switch (non-illuminated) 2-Position, 90° 3-Position, 45° 4-Position, 45° 5-Position, 30° L L C R R 1 2 3 1 2 3 4 5 4 Recess 3. Removing the Operator (Illuminated) Insert a flat screwdriver into the recess of the operator and turn the screwdriver to remove the operator. Flat screwdriver [Example] C L L R L C R C R Standard Position The non-illuminated operators can be installed in positions other than the standard position as shown above. Removing Contact Blocks, Transformers and Full Voltage Adapters Insert the end of the contact block removal tool into the snap-fit latch of the contact block (or transformer, fullvoltage adapter) and pull the tool as shown below. Pull Collective Mounting When mounting the units closely in a horizontal row on 30-mm centers, use optional barriers to prevent interconnection between adjoining terminals. The barriers can be attached simply by pressing them onto the sides of contact blocks. 30 30 Barrier (HW-VL1) Tightening Torque for Terminal Screws Tighten the M3.5 terminal screws to a torque of 1.0 to 1.3 N·m. (14/05/22) 39 ø22 TW Series Instructions Installation of LED Illuminated Units 1. Note the polarity for wiring when connecting to DC-DC converter unit. 2. Transformer type units are recommended for use in areas subjected to noise. 3. Notes for Pure White LED Lamps • Do not use the pure white LED outdoors, otherwise it will lead to the degradation of brightness and color. Do not remove or apply shock to the cap on the pure white LED lamp, otherwise it may break or damage the cap. • For the pure white LED, use a white lens. The illumination color will be dull if a different color is used. Notes on LED Illuminated Units [Protection Example 1] For AC circuit Terminal No. X1 X2 Polarity Positive Negative LED lamps consist of semiconductors. If the applied voltage exceeds the rated voltage, LED elements may deteriorate due to overheat, resulting in significant decrease in lumi nance, hue change, or failure of lighting. Also, if an extrane ous noise, transient voltage, or transient current is applied to the circuit, similar effects may occur. When using LED lamps, observe the following instructions. Rated Voltage The LED lamps are rated at 6V, 12V, or 24V AC/DC, and can be used within ±10% the rated voltage of either AC or DC. DC Power 1. Switching power supply Regulated voltage from switching power supply is best suited. Make sure to use within the rated voltage of the LED lamp. 2. Rechargeable battery Note that the battery voltage may exceed the rated volt age of the LED lamp while the battery is being charged and immediately after the charging is complete. Be sure to use the LED lamp on a voltage of ±10% the rated voltage. 3. Full-wave rectification Since the LED lamp is AC/DC compatible, a diode bridge for rectification is not necessary. If the LED lamp is used on a full-wave rectification current through a diode bridge, the rectifier diodes will reduce the voltage, resulting in lower luminance. 4. Single-phase half-wave rectification This is not suitable for the power source of LED lamps. Use constant-voltage DC power. LED with transformer C LED with LED transformer C Relay Ry coil or solenoid R LED R (Reference values) R: 120Ω C: 0.1 μF [Protection Example 2] For DC circuit + (Reference values of the diode) Forward current: More than the Ry coil current Reverse withstand voltage: Ry coil current ¥ 10 Relay Ry coil or solenoid LED Diode – Countermeasures against Dim Lighting 1. Leakage currents through the transistors or a contact protection circuit may cause the LED lamp to illuminate dimly even when the output is off. 2. When the LED lamp is illuminated by a transistor output, take the following measure. [Circuit Example] Connect shunt resistor R in parallel with the LED lamp. R Noise LED elements deteriorate due to extraneous noise, resulting in significant decrease in luminance, hue change, or failure of lighting. When such effects are anticipated, take a protec tion measure shown below, such as RC elements or a surge absorber. LED Io Io: Leakage current when the output is off R: Shunt resistor Specifications and other descriptions in this brochure are subject to change without notice. 6-64, Nishi-Miyahara 2-Chome, Yodogawa-ku, Osaka 532-0004, Japan Tel: +81-6-6398-2527, Fax: +81-6-6398-2547 E-mail: marketing@idec.co.jp IDEC CORPORATION (USA) Wendenstrasse 331, 20537 Hamburg, Germany Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 E-mail: service@idec.de IDEC CANADA LIMITED Room 701-702 Chong Hing Finance Center, No. 288 Nanjing Road West, Shanghai 200003, PRC Tel: +86-21-6135-1515 Fax: +86-21-6135-6225 / +86-21-6135-6226 E-mail: idec@cn.idec.com 3155 Pepper Mill Court, Unit 4 Mississauga, Ontario, L5L 4X7, Canada Tel: +1-905-890-8561, Toll Free: (800) 262-IDEC (4332) Fax: +1-905-890-8562 E-mail: sales@ca.idec.com IDEC AUSTRALIA PTY. LTD. www.idec.com IDEC ELEKTROTECHNIK GmbH 1175 Elko Drive, Sunnyvale, CA 94089-2209, USA Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246 E-mail: opencontact@idec.com IDEC (SHANGHAI) CORPORATION IDEC (BEIJING) CORPORATION IDEC IZUMI (H.K.) CO., LTD. Unit G & H, 26/F., MG Tower, No. 133 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong Tel: +852-2803-8989, Fax: +852-2565-0171 E-mail: info@hk.idec.com IDEC TAIWAN CORPORATION 8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih District, 22101 New Taipei City, Taiwan Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 E-mail: service@tw.idec.com IDEC IZUMI ASIA PTE. LTD. Unit 17, 104 Ferntree Gully Road, Oakleigh, Victoria 3166, Australia Tel: +61-3-8523-5900, Toll Free: 1800-68-4332 Fax: +61-3-8523-5999 E-mail: sales@au.idec.com Room 211B, Tower B, The Grand Pacific Building, 8A Guanghua Road, Chaoyang District, Beijing 100026, PRC Tel: +86-10-6581-6131, Fax: +86-10-6581-5119 No. 31, Tannery Lane #05-01, HB Centre 2, Singapore 347788 Tel: +65-6746-1155, Fax: +65-6844-5995 E-mail: info@sg.idec.com IDEC ELECTRONICS LIMITED Unit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, Fu Tian District, Shenzhen, Guang Dong 518040, PRC Tel: +86-755-8356-2977, Fax: +86-755-8356-2944 20th Fl., Sorachai Bldg., No.23/78, Soi Sukhumvit 63, Sukhumvit Rd., Klongton-nua, Wattana, Bangkok 10110 Tel: +662-392-9765, Fax: +662-392-9768 E-mail: sales@th.idec.com Unit 2, Beechwood, Chineham Business Park, Basingstoke, Hampshire RG24 8WA, UK Tel: +44-1256-321000, Fax: +44-1256-327755 E-mail: sales@uk.idec.com IDEC (SHENZHEN) CORPORATION IDEC ASIA (THAILAND) CO.,LTD. Cat. No. EP1432-3 MAY 2014 PDF (14/05/22)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2014:05:22 10:50:30+09:00 Creator : Adobe InDesign CS5.5_J (7.5.3) Modify Date : 2014:05:22 10:56:09+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:fc6de1fa-89f7-47ef-b09e-8aad321b7287 Document ID : xmp.did:EA3A823B53E1E31192BF96EA70C7E42D Original Document ID : adobe:docid:indd:064dd86a-3e8a-11e1-aa81-bbbf6c721254 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:A851FD7F50E1E31192BF96EA70C7E42D Derived From Document ID : xmp.did:A21D092E93C6E311B00CB61FF2BF2FE7 Derived From Original Document ID: adobe:docid:indd:064dd86a-3e8a-11e1-aa81-bbbf6c721254 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:417C3F5F4094E311B9B19CB2003332C1, xmp.iid:427C3F5F4094E311B9B19CB2003332C1, xmp.iid:A840B84C5794E311B9B19CB2003332C1, xmp.iid:A940B84C5794E311B9B19CB2003332C1, xmp.iid:94F57B3E6D94E311B9B19CB2003332C1, xmp.iid:905CA85C3395E311BCA7F375E821CDE0, xmp.iid:F8361ECC3395E311BCA7F375E821CDE0, xmp.iid:62F019E43495E311BCA7F375E821CDE0, xmp.iid:8CBA4FD65295E311BCA7F375E821CDE0, xmp.iid:FA2E4CD6009DE311BF38EB152C3314E8, xmp.iid:F401599D199DE311BF38EB152C3314E8, xmp.iid:D6074E841A9DE311BF38EB152C3314E8, xmp.iid:D14103FE1A9DE311BF38EB152C3314E8, xmp.iid:D24103FE1A9DE311BF38EB152C3314E8, xmp.iid:CBBFA4591C9DE311BF38EB152C3314E8, xmp.iid:008E59F3209DE311BF38EB152C3314E8, xmp.iid:018E59F3209DE311BF38EB152C3314E8, xmp.iid:23BB100A249DE311BF38EB152C3314E8, xmp.iid:507203BF279DE311BF38EB152C3314E8, xmp.iid:517203BF279DE311BF38EB152C3314E8, xmp.iid:326876232B9DE311BF38EB152C3314E8, xmp.iid:A1511BD7AD9DE3119E9AA44F8EEF392B, xmp.iid:A2511BD7AD9DE3119E9AA44F8EEF392B, xmp.iid:C9CB7094C39DE3119E9AA44F8EEF392B, xmp.iid:3E1C85A0C39DE3119E9AA44F8EEF392B, xmp.iid:3F1C85A0C39DE3119E9AA44F8EEF392B, xmp.iid:3E70739AC49DE3119E9AA44F8EEF392B, xmp.iid:3F70739AC49DE3119E9AA44F8EEF392B, xmp.iid:55E371D5C49DE3119E9AA44F8EEF392B, xmp.iid:82FF7A1EC59DE3119E9AA44F8EEF392B, xmp.iid:F69DD808F59DE3119E9AA44F8EEF392B, xmp.iid:F79DD808F59DE3119E9AA44F8EEF392B, xmp.iid:AD8895817F9EE3118EDDC73679502E92, xmp.iid:632996857F9EE3118EDDC73679502E92, xmp.iid:642996857F9EE3118EDDC73679502E92, xmp.iid:1FDDE9D67F9EE3118EDDC73679502E92, xmp.iid:2DF506D2819EE3118EDDC73679502E92, xmp.iid:2EF506D2819EE3118EDDC73679502E92, xmp.iid:BE05F3BD829EE3118EDDC73679502E92, xmp.iid:BF05F3BD829EE3118EDDC73679502E92, xmp.iid:08B7E416849EE3118EDDC73679502E92, xmp.iid:E1C538CC8C9EE3118EDDC73679502E92, xmp.iid:E2C538CC8C9EE3118EDDC73679502E92, xmp.iid:92770A1C8D9EE3118EDDC73679502E92, xmp.iid:437020238D9EE3118EDDC73679502E92, xmp.iid:978A912B8D9EE3118EDDC73679502E92, xmp.iid:1BD8F1978D9EE3118EDDC73679502E92, xmp.iid:815FF8708E9EE3118EDDC73679502E92, xmp.iid:81B184EEA19EE3118EDDC73679502E92, xmp.iid:4D93C829A79EE3118EDDC73679502E92, xmp.iid:611114EFAE9EE3118EDDC73679502E92, xmp.iid:621114EFAE9EE3118EDDC73679502E92, xmp.iid:348665A5B29EE3118A5C91676B68FBA4, xmp.iid:358665A5B29EE3118A5C91676B68FBA4, xmp.iid:5217E3FBB29EE3118A5C91676B68FBA4, xmp.iid:E9AFA646B49EE3118A5C91676B68FBA4, xmp.iid:59D3E189B59EE3118A5C91676B68FBA4, xmp.iid:5341509FB59EE3118A5C91676B68FBA4, xmp.iid:5441509FB59EE3118A5C91676B68FBA4, xmp.iid:DFB47816B69EE3118A5C91676B68FBA4, xmp.iid:DE226144B89EE3118A5C91676B68FBA4, xmp.iid:19527A4FB89EE3118A5C91676B68FBA4, xmp.iid:020735D5B89EE3118A5C91676B68FBA4, xmp.iid:906BA8FBB89EE3118A5C91676B68FBA4, xmp.iid:D77E746EB99EE3118A5C91676B68FBA4, xmp.iid:C167E06EBB9EE3118A5C91676B68FBA4, xmp.iid:564C0AF9BC9EE3118A5C91676B68FBA4, xmp.iid:71D75500BD9EE3118A5C91676B68FBA4, xmp.iid:F89A9509BD9EE3118A5C91676B68FBA4, xmp.iid:5865EB15BD9EE3118A5C91676B68FBA4, xmp.iid:5965EB15BD9EE3118A5C91676B68FBA4, xmp.iid:902909B6BD9EE3118A5C91676B68FBA4, xmp.iid:98EC1A4BBF9EE3118A5C91676B68FBA4, xmp.iid:B9E182D4409FE311AF538D8A17AEEE90, xmp.iid:ADEC8556419FE311AF538D8A17AEEE90, xmp.iid:D9C777E560AEE311A997AB32F85B8500, xmp.iid:E507F7E163AEE311A997AB32F85B8500, xmp.iid:753356D064AEE311A997AB32F85B8500, xmp.iid:BA6E662B93C6E311B00CB61FF2BF2FE7, xmp.iid:A21D092E93C6E311B00CB61FF2BF2FE7, xmp.iid:F32D317E94C6E311B00CB61FF2BF2FE7, xmp.iid:F42D317E94C6E311B00CB61FF2BF2FE7, xmp.iid:6BC8F46CBEC6E311B00CB61FF2BF2FE7, xmp.iid:A851FD7F50E1E31192BF96EA70C7E42D, xmp.iid:EA3A823B53E1E31192BF96EA70C7E42D History When : 2014:02:13 08:49:54+09:00, 2014:02:13 08:49:54+09:00, 2014:02:13 11:34:02+09:00, 2014:02:13 11:34:02+09:00, 2014:02:13 14:11:07+09:00, 2014:02:14 13:49:18+09:00, 2014:02:14 13:52:25+09:00, 2014:02:14 14:00:15+09:00, 2014:02:14 17:34:36+09:00, 2014:02:24 12:07:47+09:00, 2014:02:24 15:05:09+09:00, 2014:02:24 15:11:36+09:00, 2014:02:24 15:15+09:00, 2014:02:24 15:15+09:00, 2014:02:24 15:24:44+09:00, 2014:02:24 15:57:39+09:00, 2014:02:24 15:57:39+09:00, 2014:02:24 16:19:46+09:00, 2014:02:24 16:46:18+09:00, 2014:02:24 16:46:18+09:00, 2014:02:24 17:10:35+09:00, 2014:02:25 08:46:11+09:00, 2014:02:25 08:46:11+09:00, 2014:02:25 11:21:48+09:00, 2014:02:25 11:22:08+09:00, 2014:02:25 11:22:09+09:00, 2014:02:25 11:29:08+09:00, 2014:02:25 11:29:08+09:00, 2014:02:25 11:30:47+09:00, 2014:02:25 11:32:49+09:00, 2014:02:25 17:15:49+09:00, 2014:02:25 17:15:49+09:00, 2014:02:26 09:47:02+09:00, 2014:02:26 09:47:09+09:00, 2014:02:26 09:49:24+09:00, 2014:02:26 09:49:25+09:00, 2014:02:26 10:03:36+09:00, 2014:02:26 10:03:36+09:00, 2014:02:26 10:10:12+09:00, 2014:02:26 10:10:12+09:00, 2014:02:26 10:19:50+09:00, 2014:02:26 11:22:11+09:00, 2014:02:26 11:22:11+09:00, 2014:02:26 11:24:24+09:00, 2014:02:26 11:24:36+09:00, 2014:02:26 11:24:51+09:00, 2014:02:26 11:27:53+09:00, 2014:02:26 11:33:57+09:00, 2014:02:26 13:53:28+09:00, 2014:02:26 14:30:55+09:00, 2014:02:26 15:26:32+09:00, 2014:02:26 15:26:32+09:00, 2014:02:26 15:53:06+09:00, 2014:02:26 15:53:06+09:00, 2014:02:26 15:55:31+09:00, 2014:02:26 16:04:46+09:00, 2014:02:26 16:13:49+09:00, 2014:02:26 16:14:25+09:00, 2014:02:26 16:17:44+09:00, 2014:02:26 16:17:45+09:00, 2014:02:26 16:33:21+09:00, 2014:02:26 16:33:39+09:00, 2014:02:26 16:37:23+09:00, 2014:02:26 16:38:28+09:00, 2014:02:26 16:41:41+09:00, 2014:02:26 16:56+09:00, 2014:02:26 17:07:02+09:00, 2014:02:26 17:07:14+09:00, 2014:02:26 17:07:29+09:00, 2014:02:26 17:07:50+09:00, 2014:02:26 17:12:18+09:00, 2014:02:26 17:12:19+09:00, 2014:02:26 17:23:38+09:00, 2014:02:27 08:50:54+09:00, 2014:02:27 08:54:32+09:00, 2014:03:18 15:09:30+09:00, 2014:03:18 15:09:36+09:00, 2014:03:18 15:16:16+09:00, 2014:04:18 09:48:34+09:00, 2014:04:18 09:48:38+09:00, 2014:04:18 09:58:02+09:00, 2014:04:18 09:58:02+09:00, 2014:04:18 14:58:12+09:00, 2014:05:22 10:48:47+09:00, 2014:05:22 10:48:54+09:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata Metadata Date : 2014:05:22 10:56:09+09:00 Creator Tool : Adobe InDesign CS5.5_J (7.5.3) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 9377 bytes, use -b option to extract), (Binary data 11439 bytes, use -b option to extract) Doc Change Count : 4353 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 40EXIF Metadata provided by EXIF.tools