Cct 04c

2014-09-05

: Pdf 196612-Attachment 196612-Attachment 784550 Batch7 unilog

Open the PDF directly: View PDF PDF.
Page Count: 32

DownloadCct-04c
Open PDF In BrowserView PDF
“Made with pride in the USA”

Catalog
CCT-11A
Fusing chart update

Effective Date:
June 10, 2011

Supercedes: CCT-10B

MICRON INDUSTRIES CATALOG CCT-11A
REPLACES CCT-10B

Table of Contents
THE MICRON EDGE
- Warranty
Transformer Selection Process
Standards
-UL/CSA
-CUL
-IEC
Control Transformers
Series 2 ImperviTRAN & ImperviTRAN
-Connection Diagrams
-Accessories
Overcurrent Protection Tables (UPDATED)
GlobalTRAN
-Connection Diagrams
Medium Voltage
Power Supplies
DINergy Power Supplies

2

3
4-5
6

8-13
14
15-17
18
19-24
25
26
27-29

LVGP
-Overview

30

Notes

31

MICRON POWER DELIVERY

THE MICRON EDGE
While other manufacturers
treat transformers as
just one of a variety of
products, transformers
are THE major product
focus for Micron

This focus and resulting
commitment to excellence,
exemplified in our
unprecedented 20-year
warranty¹, has made
Micron

#1
with specifiers of
transformers
for over 30 years.

¹ 20 years applies to all 600 volt class Control
Transformer product. LVGP and Medium Voltage
are waranted for one year, Power Supplies for five.

3

MICRON POWER DELIVERY

TRANSFORMER SELECTION
PROCESS
Determining Inrush and Voltage
Requirements

Selecting a transformer for
industrial control circuit
applications requires
knowledge of the following
terms:
INRUSH VA is the product
of the load voltage (V)
multiplied by the current (A)
that is required during startup. It is calculated by adding
the inrush VA requirements
of all devices (contactors,
timers, relays, pilot lights,
solenoids, etc.), which will
be energized together.
Inrush VA requirements are
best obtained from the
component manufacturer.
SEALED VA also called
Steady State VA, is the
product of the load voltage
(V) multiplied by the current
(A) that is required to
operate the circuit after
initial start-up or under
normal operating conditions.
It is calculated by adding the
sealed VA requirements of
all electrical components of
the circuit that will be
energized at any given time.
Sealed VA requirements are
best obtained from the
component manufacturer.

4

PRIMARY VOLTAGE is
the voltage available from
the electrical distribution
system and its operational
frequency, which is
connected to the transformer
supply voltage (H) terminals.
SECONDARY VOLTAGE
is the voltage required for
load operation, which is
connected to the transformer
load voltage (X) terminals.
Once the circuit variables
have been determined,
transformer selection is a
simple 5-step process as
follows:

1.

Determine the
Application Inrush
VA by using the
following industry
accepted formula.

Application Inrush VA =  (INRUSH
VA)² + (SEALED VA)²

2.

Refer to the
Regulation Data
Chart. If the primary
voltage is basically
stable and does not
vary by more than
5% from nominal, the

MICRON POWER DELIVERY

REGULATION DATA CHART
Transformer
Inrush VA at 20% Power factor
VA Rating NEMA / IEC NEMA / IEC NEMA / IEC
95% Sec.
90% Sec.
85% Sec.
Voltage
Voltage
Voltage
25¹
100 / ---130 / --150 / --50¹
170 / 190
200 / 220
240 / 270
75¹
310 / 350
410 / 460
540 / 600
100¹
370 / 410
540 / 600
730 / 810
150²
780 / 850
930 / 1030
1150 / 1270
200²
810 / 900
1150 / 1270
1450 / 1600
250²
1400 / 1540 1900 / 2090
2300 / 2530
300²
1900 / 2090 2700 / 2970
3850 / 4240
350²
3100 / 3410 3650 / 4020
4800 / 5280
500²
4000 / 4400 5300 / 5830
7000 / 7700
750²
8300 / 9130 11000 / 12100 14000 / 15400
1000²
15000 / 16500 21000 / 23000 27000 / 29500
1000³
9000 / 9900 13000 / 14300 18500 / 20300
1500³
10500 / 11500 15000 / 16500 20500 / 22500
2000³
17000 / 18900 25500 / 27300 34000 / 36400
3000³
24000 / 25700 36000 / 38500 47500 / 50200
5000³
55000 / 58800 92500 / 98900 115000 / 122000

To comply with NEMA standards, which require
all magnetic devices to operate successfully at 85%
of rated voltage, the 90% secondary column is
most often used in selecting a transformer. No
comparable requirement is available for IEC.

¹ For units with class 105° C insulation system.
² For units with class 130° C insulation system.
³ For units with class 180° C insulation system

5

MICRON POWER DELIVERY

INDUSTRY AND INTERNATIONAL
STANDARDS
Micron offers a broad line of standard transformers, each made with the
finest materials and workmanship. Laminations of high-grade silicon
steel assure optimum performance and the finest quality copper magnet
wire assures efficient operation. Insulation materials are of the highest
rating available for the temperature class and mounting brackets of
heavy gauge steel add strength and stability. All are UL 506 listed (File
# E46323) and either C-UL or CSA certified (File # LR27533) and meet
NEMA and ANSI requirements.
In response to the change in compliance standards for CE marking of
industrial control transformers as required by IEC/EN guidelines,
Micron has introduced new GlobalTRAN models in compliance with
EN61558-2. This new IEC/EN standard replaces the previous IEC/EN
60742 standard for control power transformers that expired on
December 31, 2003. The Micron design engineering department has
produced 61558-2 compliant designs that permit the customer to retain
mounting layouts used for the previous Micron 60742 designs.
GlobalTRAN® products carry the CE mark, certifying 100%
compliance with requirements of EN61558 for Non-Short Circuit Proof
Isolating Transformers. GlobalTRAN control transformers feature
touch-proof terminals, utilizing either Micron's SafeTouch terminal
covers or a touch-proof terminal block, and meet true IP-20 or IP-00
terminal protection ratings as defined by IEC-529.
Of course, all GlobalTRAN products carry either UL listing and CSA
certification or cUL.
GlobalTRAN is the most reliable and versatile control transformer in the
industry today.
DINergy™ products are designed to meet the most stringent
international specifications for safety and EMI; and are designed to
compact dimensions. All carry C-UL certification to UL60950 and
UL508 plus the CE mark signifying certification to EN60950, EN
55022B, EN 61000-3-2 and IEC610004-2, 3, 4, 5, 6, 8, 11.
ImperviPOWER 67™ products are designed to meet the most stringent
international specifications; and are designed to compact dimensions.
All carry certification to UL60950, CSA 22.2, EN60950, EN 55011, EN
6100-6, EN6000-6-2, -4-2, -4-3, -4-4, -4-5, -4-6 and -4-11.

6

MICRON POWER DELIVERY

IMPERVITRAN

SIMPLY – THE MOST VERSATILE AVAILABLE
ImperviTRAN's feature-laden Series 2 design. Developed to
SEMS screw terminal strips as an integral part of the coil bobbin
address ALL customer needs with a product designed in a
highly efficient manner. ImperviTRAN designs span over 35  Allows bare wire and terminal connection methods
 Easily adaptable to slot, Phillips and hex driver tools
years of market leadership.
 Robust physical support instead of “floating” terminal strips
UL/CSA or C-UL Family Listing
 Absolute flexibility of design for 600 volt class product
Fully encapsulated coil
Tough environment-proof construction

Integral accessory mounting plate on transformer top
 Allows field modification to block-style primary fusing
Reduces SKU count for fused/non-fused applications
 Provides mounting platform for additional items (DIN Rail)

Eases wire routing around the transformer
Standard strap brackets or optional mounting plate
Fusion-welded coil terminations instead of solder joints  Features a superior weld result for vibration-resistant stability
Eliminates cold solder joint breakage, improves conductivity

Offers common mounting template across a wide range of voltages

 Provides a lead-free RoHS compliant construction

 Alternate plates available for OEM volumes

Face-on terminal labels with large schematic indicators
IP-20 cover kits available
 Terminal designations clearly visible to the installer and technician Quickly convertible to an IP-20 safety level
 Indicators aligned with terminal screws for clarity

CONTROL TRANSFORMERS
GENERAL SPECIFICATIONS:
STYLE: SERIES 2 IMPERVITRAN
STYLE: IMPERVITRAN (NOT SERIES 2)
APPROVALS: UL/Cul FILE# E46323
APPROVALS: UL LISTED FILE# E46323/ CSA APPROVED FILE# LR27533
TEMP CLASS: 105°C/130°C
TEMP CLASS: 105°C/130°C/180°C
VA SIZES: 50-1500
VA SIZES: 1000-5000
TERMINAL TORQUE:
SUFFIX DESCRIPTION:
ALL IMPERVITRAN PRODUCT
"K" IN SUFFIX DENOTES INSTALLED SECONDARY FUSE CLIPS
≤30A: 20 INCH-POUNDS
"R" IN SUFFIX DENOTES INSTALLED CLASS "CC" PRIMARY FUSE BLOCK
TWO LETTER SUFFIX
= TEMP CLASS 105C
>30A: 30 INCH-POUNDS
THREE LETTER SUFFIX ENDING "F" = TEMP CLASS 130C
THREE LETTER SUFFIX ENDING "H" = TEMP CLASS 180C
CATALOG
CATALOG
CATALOG
NUMBER
NUMBER
NUMBER
GROUP "A"
GROUP "C"
GROUP "F"
VOLTAGE:
VOLTAGE:
VOLTAGE:
PRI: 220x440, 230x460, 240x480
PRI: 120x240
PRI: 208/277
SEC: 110/115/120
SEC: 24
SEC: 120
VA
AMPS
VA
AMPS
VA
AMPS
B050BTZ13JK
50
0.43
B050LP7JK
50
2.08
B050MQ15XK
50
0.42
B050BTZ13RB
B050LP7RB
B050MQ15RK
B075BTZ13JK
75
0.65
B075LP7JK
75
3.13
B075MQ15XK
75
0.63
B075BTZ13RB
B075LP7RB
B075MQ15RK
B100BTZ13JK
100
0.87
B100LP7JK
100
4.17
B100MQ15XK
100
0.83
B100BTZ13RB
B100LP7RB
B100MQ15RK
B150BTZ13JKF
150
1.30
B150LP7JKF
150
6.25
B150MQ15XKF
150
1.25
B150BTZ13RBF
B150LP7RBF
B150MQ15RKF
B200BTZ13JKF
200
1.74
B200LP7JKF
200
8.33
B200MQ15XKF
200
1.67
B200BTZ13RBF
B200LP7RBF
B200MQ15RKF
B250BTZ13JKF
250
2.17
B250LP7JKF
250
10.42
B250MQ15XKF
250
2.08
B250BTZ13RBF
B250LP7RBF
B250MQ15RKF
B300BTZ13JKF
300
2.61
B300LP7JKF
300
12.50
B300MQ15XKF
300
2.50
B300BTZ13RBF
B300LP7RBF
B300MQ15RKF
B350BTZ13JKF
350
3.04
B350LP7JKF
350
14.58
B350MQ15XKF
350
2.92
B350BTZ13RBF
B350LP7RBF
B350MQ15RKF
B500BTZ13JKF
500
4.35
B500LP7JKF
500
20.83
B500MQ15XKF
500
4.17
B500BTZ13RBF
B500LP7RBF
B500MQ15RKF
B750BTZ13JKF
750
6.52
B750LP7JKF
750
31.25
B750MQ15XKF
750
6.25
B750BTZ13RBF
B750LP7RBF
B750MQ15RKF
B1K0BTZ13JKF
1000
8.70
B1K0BTZ13RBF
GROUP "G"
B1K5BTZ13JKF
1500
13.04
VOLTAGE:
B1K5BTZ13RBF
PRI: 208/230/460
B2K0BTZ13JKH
2000
17.39
SEC: 115
B2K0BTZ13RBH
B050MBT13XK
50
0.43
B3K0BTZ13JXH
3000
26.09
B050MBT13RK
B5K0BTZ13JXH
5000
43.48
B075MBT13XK
75
0.65
B075MBT13RK
GROUP "B"
GROUP "E"
B100MBT13XK
100
0.87
VOLTAGE:
VOLTAGE:
B100MBT13RK
PRI: 240x480
PRI: 550/575/600
B150MBT13XKF
150
1.30
SEC: 24
SEC: 110/115/120
B150MBT13RKF
B050PU7JK
50
2.08
B050WZ13XK
50
0.43
B200MBT13XKF
200
1.74
B050PU7RB
B050WZ13RK
B200MBT13RKF
B075PU7JK
75
3.13
B075WZ13XK
75
0.65
B250MBT13XKF
250
2.17
B075PU7RB
B075WZ13RK
B250MBT13RKF
B100PU7JK
100
4.17
B100WZ13XK
100
0.87
B300MBT13XKF
300
2.61
B100PU7RB
B100WZ13RK
B300MBT13RKF
B150PU7JKF
150
6.25
B150WZ13XKF
150
1.30
B350MBT13XKF
350
3.04
B150PU7RBF
B150WZ13RKF
B350MBT13RKF
B200PU7JKF
200
8.33
B200WZ13XKF
200
1.74
B500MBT13XKF
500
4.35
B200PU7RBF
B200WZ13RKF
B500MBT13RKF
B250PU7JKF
250
10.42
B250WZ13XKF
250
2.17
B750MBT13XKF
750
6.52
B250PU7RBF
B250WZ13RKF
B750MBT13RKF
B300PU7JKF
300
12.50
B300WZ13XKF
300
2.61
B1K0MBT13XKF
1000
8.70
B300PU7RBF
B300WZ13RKF
B1K0MBT13RKF
B350PU7JKF
350
14.58
B350WZ13XKF
350
3.04
B1K5MBT13XKF
1500
13.04
B350PU7RBF
B350WZ13RKF
B1K5MBT13RKF
B500PU7JKF
500
20.83
B500WZ13XKF
500
4.35
B2K0MBT13XKH
2000
17.39
B500PU7RBF
B500WZ13RKF
B2K0MBT13RKH
B750PU7JKF
750
31.25
B750WZ13XKF
750
6.52
B3K0MBT13XXH
3000
26.09
B750PU7RBF
B750WZ13RKF
B5K0MBT13XXH
5000
43.48
8

MICRON POWER DELIVERY

STYLE: SERIES 2 IMPERVITRAN
CATALOG
NUMBER
GROUP "H"
VOLTAGE:
PRI: 230/460/575
SEC: 95/115
VA
AMPS
B050BTW37XX
50
0.53/0.44
B050BTW37RX
B075BTW37XX
75
0.79/0.65
B075BTW37RX
B100BTW37XX
100
1.05/0.87
B100BTW37RX
B150BTW37XXF
150
1.58/1.30
B150BTW37RXF
B200BTW37XXF
200
2.11/1.74
B200BTW37RXF
B250BTW37XXF
250
2.63/2.17
B250BTW37RXF
B300BTW37XXF
300
3.16/2.61
B300BTW37RXF
B350BTW37XXF
350
3.68/3.04
B350BTW37RXF
B500BTW37XXF
500
5.26/4.35
B500BTW37RXF
B750BTW37XXF
750
7.89/6.52
B750BTW37RXF
B1K0BTWZ37XKH 1000
10.53/8/70
B1K0BTWZ37RKH
B1K5BTWZ37XKH 1500 15.79/13.04
B1K5BTWZ37RKH
B2K0BTWZ37XKH 2000 21.05/17.39
B2K0BTWZ37RKH
B3K0BTWZ37XXH 3000 31.58/26.09
B5K0BTWZ37XXH 5000 52.63/43.48
GROUP "I"
VOLTAGE:
PRI: 380/400/415
SEC: 110x220
VA
AMPS
B050RFD34XJ
50
0.46/0.23
B050RFD34RJ
B075RFD34XJ
75
0.68/0.34
B075RFD34RJ
B100RFD34XJ
100
0.91/0.46
B100RFD34RJ
B150RFD34XJF
150
1.37/0.69
B150RFD34RJF
B200RFD34XJF
200
1.82/0.91
B200RFD34RJF
B250RFD34XJF
250
2.28/1.14
B250RFD34RJF
B300RFD34XJF
300
2.72/1.36
B300RFD34RJF
B350RFD34XJF
350
3.18/1.59
B350RFD34RJF
B500RFD34XJF
500
4.55/2.27
B500RFD34RJF
B750RFD34XJF
750
6.82/3.41
B750RFD34RJF

9

CONTROL TRANSFORMERS
STYLE: IMPERVITRAN (NOT SERIES 2)
CATALOG
NUMBER
GROUP "J"
VOLTAGE:
PRI: 208/230/460
SEC: 24/115
VA
AMPS
B050-2000-1
50
2.08/0.44
B050-2000-8
B075-2001-1
75
3.13/0.65
B075-2001-8
B100-2002-1
100
4.17/0.87
B100-2002-8
B150-2003-1F
150
6.25/1.30
B150-2003-8F
B200-2004-1F
200
8.33/1.74
B200-2004-8F
B250-2005-1F
250
10.42/2.17
B250-2005-8F
B300-2006-1F
300
12.50/2.61
B300-2006-8F
B350-2007-1F
350
14.58/3.04
B350-2007-8F
B500-2008-1F
500
20.84/4.35
B500-2008-8F
B750-2009-1F
750
31.3/6.5
B750-2009-8F
B1K0-2010-1F
1000
41.7/8.7
B1K0-2010-8F

CATALOG
NUMBER
GROUP "K"
VOLTAGE:
PRI: 240x480
SEC: 120x240
VA
AMPS
B050PU1519JJ
50
0.42/0.21
B050PU1519RR
B075PU1519JJ
75
0.63/0.31
B075PU1519RR
B100PU1519JJ
100
0.83/0.42
B100PU1519RR
B150PU1519JJF
150
1.25/0.63
B150PU1519RRF
B200PU1519JJF
200
1.67/0.83
B200PU1519RRF
B250PU1519JJF
250
2.08/1.04
B250PU1519RRF
B300PU1519JJF
300
2.50/1.25
B300PU1519RRF
B350PU1519JJF
350
2.92/1.46
B350PU1519RRF
B500PU1519JJF
500
4.17/2.08
B500PU1519RRF
B750PU1519JJF
750
6.25/3.12
B750PU1519RRF

GROUP "J"
USE SERIES 2 GROUP "J" (ABOVE)
FOR NEW APPLICATIONS!
VOLTAGE:
PRI: 208/230/460
SEC: 24/115
VA
AMPS
B050MBT713XK
50
2.08/0.44
B050MBT713RK
B075MBT713XK
75
3.13/0.65
B075MBT713RK
B100MBT713XK
100
4.17/0.87
B100MBT713RK
B150MBT713XKF
150
6.25/1.30
B150MBT713RKF
B200MBT713XKF
200
8.33/1.74
B200MBT713RKF
B250MBT713XKF
250
10.42/2.17
B250MBT713RKF
B300MBT713XKF
300
12.50/2.61
B300MBT713RKF
B350MBT713XKF
350
14.58/3.04
B350MBT713RKF
B500MBT713XKF
500
20.84/4.35
B500MBT713RKF

MICRON POWER DELIVERY

CONTROL TRANSFORMERS
STYLE: IMPERVITRAN (NOT SERIES 2)
STYLE: SERIES 2 IMPERVITRAN

CATALOG
NUMBER
GROUP "L"

B050-0482-1
B050-0482-8
B100-0483-1
B100-0483-8
B150-0484-1F
B150-0484-8F
B250-0485-1F
B250-0485-8F
B350-0486-1F
B350-0486-8F
B500-0487-1F
B500-0487-8F
B750-0488-1F
B750-0488-8F

VOLTAGE:
PRI: 208-600
SEC: 85-130
VA
AMPS
50
0.38
100

0.77

150

1.15

250

1.92

350

2.69

500

3.85

750

5.77

GROUP "M"
VOLTAGE:
PRI: 240x480, 230x460, 220x440
SEC: 120x240, 115x230, 110x220
VA
AMPS
B1K0-0500-3F
1000
8.70/4.35
B1K5-0501-3H
1500
13.04/6.52
B2K0-0502-3H
2000
17.39/8.70
B3K0-0503-3H
3000 26.09/13.04
B5K0-0504-3H
5000 43.48/21.74
GROUP "N"
VOLTAGE:
PRI: 240, 347, 380
SEC: 120x240
VA
AMPS
B1K0-0321-3F
1000
8.33/4.17
B1K5-0322-3H
1500
12.50/6.25
B2K0-0323-3H
2000
16.67/8.33
B3K0-0324-3H
3000 25.00/12.50
B5K0-0325-3H
5000 41.67/20.83
GROUP "P"
VOLTAGE:
PRI: 120x240
SEC: 120x240
VA
B050LP1519JJ
50
B100LP1519JJ
100
B150LP1519JJF
150
B250LP1519JJF
250
B350LP1519JJF
350
B500LP1519JJF
500
B750LP1519JJF
750

10

AMPS
0.42/0.21
0.83/0.42
1.25/0.63
2.08/1.04
2.92/1.46
4.17/2.08
6.25/3.12

MICRON POWER DELIVERY

DIMENSIONAL DATA

NOTE:
SERIES 2 AND IMPERVITRAN
TERMINAL BLOCK CAN HAVE
4 OR 6 TERMINALS AS NOTED.

PRIMARY FUSE BLOCK ADDS
1.375" (35MM) TO "C" DIMENSION.

A

D

C

B

E

NOTE: DIMENSION"C"' IS A MAXIMUM DIMENSION. IF SECONDARY FUSE CLIPS ARE
(MATCHED DIMENSIONS)
CATALOG GROUPS
INCLUDED IN DESIGN, DEDUCT A MAXIMUM OF 0.50 (12.7MM) TO REMOVE.
A, B, C, E, F, G*, H*, I, K, P
ALWAYS REQUEST CURRENT FACTORY DRAWING FOR FINAL REFERENCE.
VOLTAGE GROUPS
BTZ13, PU7, LP7, WZ13, MQ15,
DIMENSIONS INCHES/MM
MBT13, BTW37, RFD34, PU1519,
A
B
C
D
E
LP1519
SERIES 2 (MAX)
ALL VERSIONS
MAXIMUM
CENTERS
VA
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
50
4-TERM
3.78
96
3.00
76
3.14
79
1.96
50
2.50
64
75
4-TERM
4.03
102
3.00
76
3.14
79
2.42
62
2.50
64
100
4-TERM
4.03
102
3.38
86
3.46
86
2.42
62
2.82
71
150
4-TERM
4.03
102
3.75
95
3.77
96
2.82
71
3.13
79
200
4-TERM
4.38
111
4.50
114
4.40
112
2.42
62
3.75
95
250
4-TERM
4.38
111
4.50
114
4.40
112
2.82
71
3.75
95
300
4-TERM
4.75
121
4.50
114
4.40
112
3.18
81
3.75
95
350
4-TERM
4.75
121
4.50
114
4.40
112
3.75
95
3.75
95
500
6-TERM
6.11
155
5.25
133
5.14
131
3.88
99
4.38
111
750
6-TERM
7.61
193
5.25
133
5.14
131
5.38
137
4.38
111
* GROUP "G" MATCHES IN 75, 150 & 250VA.
G
50
4-TERM
3.78
96
3.00
76
3.14
79
2.21
56
2.50
64
100
4-TERM
4.00
102
3.38
86
3.46
86
2.62
67
2.82
71
200
4-TERM
4.38
111
4.50
114
4.40
112
2.82
71
3.75
95
300
4-TERM
4.75
121
4.50
114
4.40
112
3.75
95
3.75
95
350
4-TERM
5.75
146
4.50
114
4.40
112
4.72
120
3.75
95
500
6-TERM
6.11
155
5.25
133
5.14
131
4.38
111
4.38
111
750
6-TERM
7.61
193
5.25
133
5.14
131
5.87
149
4.38
111
* GROUP "H" MATCHES IN 200, 250, 300 & 500VA
H
50
4-TERM
4.03
102
3.00
76
2.72
69
2.20
56
2.50
64
75
4-TERM
4.53
115
3.00
76
2.72
69
2.62
67
2.50
64
100
4-TERM
4.03
102
3.75
95
3.36
85
2.82
71
3.13
79
150
4-TERM
4.53
115
3.75
95
3.36
85
3.18
81
3.75
95
350
4-TERM
5.00
127
4.50
114
3.97
101
3.75
95
3.75
95
750
6-TERM
8.11
206
5.25
133
4.63
118
5.87
149
4.38
111

APPROX
WEIGHT
LBS
3.00
4.00
5.20
6.00
8.00
10.00
12.00
14.00
16.00
28.00

3.50
5.70
7.00
11.00
13.00
15.00
28.00

3.50
4.50
6.00
7.70
16.50
28.00

DIAGRAMS BELOW DEPICT INSTALLED PRIMARY FUSING OPTION.

DIAGRAMS DEPICT UNITS 500VA AND UP.

11

MICRON POWER DELIVERY

DIMENSIONAL DATA (KVA SIZES)
KVA SIZES CAN EITHER BE SERIES 2 OR

IMPERVITRAN

DIAGRAMS DEPICT SERIES 2 DESIGN.

NOTE:
SERIES 2 AND IMPERVITRAN
TERMINAL BLOCK CAN HAVE
4 OR 6 TERMINALS AS NOTED.

PRIMARY FUSE BLOCK ADDS
1.375" (35MM) TO "C" DIMENSION.
A

CATALOG (VOLTAGE) GROUP
A (BTZ13)
VA
1000 6-TERM
1500 6-TERM
2000 6-TERM
3000 6-TERM
5000 6-TERM

D

C

B

E

NOTE: DIMENSION"C"' IS A MAXIMUM DIMENSION. IF SECONDARY FUSE CLIPS ARE
INCLUDED IN DESIGN, DEDUCT A MAXIMUM OF 0.50 (12.7MM) TO REMOVE.
ALWAYS REQUEST CURRENT FACTORY DRAWING FOR FINAL REFERENCE.
DIMENSIONS INCHES/MM
A
B
C
D
E
(MAX)
MAXIMUM
CENTERS
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
6.11
155
6.75
172
6.30
160
3.91
99
6.13
156
8.11
206
6.75
172
6.32
161
6.12
155
6.13
156
7.75
197
6.75
172
6.28
160
4.97
126
6.13
156
8.06
205
9.00
229
7.50
191
5.25
133
7.50
191
10.38
264
9.00
229
7.50
191
7.56
192
7.50
191

APPROX
WEIGHT
LBS
30.50
50.10
46.00
55.90
84.40

G (MBT13)
1000 6-TERM
1500 6-TERM
2000 6-TERM
3000 6-TERM
5000 6-TERM

7.44
8.50
8.13
8.56
10.00

189
216
207
217
254

6.38
6.75
6.75
9.00
9.00

162
172
172
229
229

5.42
5.73
5.75
7.50
7.50

138
146
146
191
191

5.06
6.09
5.25
5.75
7.56

129
155
133
146
192

5.31
6.13
6.13
7.50
7.50

135
156
156
191
191

37.00
53.90
42.00
64.50
97.00

H (BTWZ37)
1000 6-TERM
1500 6-TERM
2000 6-TERM
3000 6-TERM
5000 6-TERM

7.00
7.45
7.56
8.75
11.00

178
189
192
222
279

6.38
6.75
9.00
9.00
9.00

162
172
229
229
229

5.42
6.29
7.80
7.50
7.50

138
160
198
191
191

5.06
5.25
4.81
5.94
8.19

129
133
122
151
208

5.31
6.13
7.50
7.50
7.50

135
156
191
191
191

31.80
44.20
57.70
76.20
127.40

M
240/480 X 120/240
1000 4-TERM
1500 6-TERM
2000 6-TERM
3000 6-TERM
5000 6-TERM

7.00
7.00
7.75
8.06
10.00

178
178
197
205
254

5.25
6.75
6.75
9.00
9.00

133
172
172
229
229

4.25
5.75
5.73
7.50
7.50

108
146
146
191
191

5.38
4.25
4.97
5.25
7.19

137
108
126
133
183

4.38
6.13
6.13
7.50
7.50

111
156
156
191
191

26.30
31.00
46.00
56.00
85.40

N
240,347,380 X 120/240
1000 6-TERM
1500 6-TERM
2000 6-TERM
3000 6-TERM
5000 6-TERM

7.38
8.13
8.88
8.50
10.38

187
207
226
216
264

6.38
6.38
6.75
9.00
9.00

162
162
172
229
229

5.44
5.44
5.75
7.50
7.50

138
138
146
191
191

5.06
5.06
6.13
5.69
7.56

129
129
156
146
192

5.31
5.31
6.13
7.50
7.50

135
135
156
191
191

29.00
33.30
50.00
74.00
110.00

DIAGRAMS DEPICT IMPERVITRAN DESIGN.

12

MICRON POWER DELIVERY

DIMENSIONAL DATA

NOTE:
SERIES 2 AND IMPERVITRAN
TERMINAL BLOCK CAN HAVE
4 OR 6 TERMINALS AS NOTED.

PRIMARY FUSE BLOCK ADDS
1.375" (35MM) TO "C" DIMENSION.

A

CATALOG (VOLTAGE) GROUP
OBSOLETE GROUP "J"
ORIGINAL IMPERVITRAN
P/N
B050MBT713XK 4-TERM
B075MBT713XK 4-TERM
B100MBT713XK 4-TERM
B150MBT713XKF 4-TERM
B200MBT713XKF 4-TERM
B250MBT713XKF 4-TERM
B300MBT713XKF 4-TERM
B350MBT713XKF 4-TERM
B500MBT713XKF 4-TERM
J
SERIES 2
B050-2000-1
B075-2001-1
B100-2002-1
B150-2003-1F
B200-2004-1F
B250-2005-1F
B300-2006-1F
B350-2007-1F
B500-2008-1F
B750-2009-1F
B1K0-2010-1F

D

C

B

E

NOTE: DIMENSION"C"' IS A MAXIMUM DIMENSION. IF SECONDARY FUSE CLIPS ARE
INCLUDED IN DESIGN, DEDUCT A MAXIMUM OF 0.50 (12.7MM) TO REMOVE.
ALWAYS REQUEST CURRENT FACTORY DRAWING FOR FINAL REFERENCE.
DIMENSIONS INCHES/MM
A
B
C
D
E
SERIES 2 (MAX)
ALL VERSIONS
MAXIMUM
CENTERS
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
3.50
89
3.00
76
3.14
79
2.25
57
2.50
64
3.50
89
3.38
86
3.44
87
2.44
62
2.82
71
3.63
92
3.75
95
3.78
96
2.44
62
3.13
79
4.00
102
3.75
95
3.78
96
3.19
81
3.13
79
4.38
111
4.50
114
4.40
112
3.00
76
3.75
95
4.38
111
4.50
114
4.40
112
3.75
95
3.75
95
5.19
132
5.25
133
5.14
131
3.88
99
4.38
111
5.00
127
5.25
133
5.14
131
3.88
99
4.38
111
5.50
140
5.25
133
5.14
131
5.38
137
4.38
111

APPROX
WEIGHT
LBS
3.40
4.80
5.90
8.00
9.80
12.00
14.00
15.00
18.00

4-TERM
4-TERM
4-TERM
4-TERM
4-TERM
4-TERM
4-TERM
6-TERM
6-TERM
6-TERM
6-TERM

4.53
4.53
4.53
5.03
4.38
4.75
6.11
6.11
7.11
7.11
8.13

115
115
115
128
111
121
155
155
181
181
207

3.00
3.75
3.75
3.75
4.50
4.50
5.25
5.25
5.25
6.75
6.75

76
95
95
95
114
114
133
133
133
172
172

3.14
3.78
3.78
3.78
4.40
4.40
5.14
5.14
5.14
6.30
5.73

79
96
96
96
112
112
131
131
131
160
146

2.82
2.82
3.00
3.19
3.00
3.75
3.88
3.88
5.38
4.97
6.13

71
71
76
81
76
95
99
99
137
126
156

2.50
3.13
3.13
3.13
3.75
3.75
4.38
4.38
4.38
6.13
6.13

64
79
79
79
95
95
111
111
111
156
156

3.40
4.80
5.90
8.00
9.80
12.00
14.00
15.00
18.00
38.60
48.40

L
ORIGINAL IMPERVITRAN
B050-0482-1
6-TERM
B100-0483-1
6-TERM
B150-0484-1F 6-TERM
B250-0485-1F 6-TERM
B350-0486-1F 6-TERM
B500-0487-1F 6-TERM
B750-0488-1F 6-TERM

3.44
4.00
4.00
5.75
5.14
7.19
6.50

87
102
102
146
131
183
165

3.88
3.75
4.50
4.50
5.25
5.14
6.75

99
95
114
114
133
131
172

3.38
3.50
4.50
4.50
4.75
4.75
6.00

86
89
114
114
121
121
152

2.41
3.00
2.82
4.38
4.38
5.88
4.25

61
76
71
111
111
149
108

2.81
3.13
3.75
3.75
4.38
4.38
6.13

71
79
95
95
111
111
156

4.00
6.60
8.70
11.40
13.60
17.40
27.50

DIAGRAMS BELOW DEPICT INSTALLED PRIMARY FUSING OPTION.

DIAGRAMS DEPICT UNITS 500VA AND UP.

13

MICRON POWER DELIVERY

CONNECTION DIAGRAMS

CONNECTION DIAGRAM:
GROUP "A"

CONNECTION DIAGRAM:
GROUP "E"

CONNECTION DIAGRAM:
GROUP "H"

14

CONNECTION DIAGRAM:
GROUP "B"

CONNECTION DIAGRAM:
GROUP "F"

CONNECTION DIAGRAM:
GROUP "C"

CONNECTION DIAGRAM:
GROUP "G"

CONNECTION DIAGRAM:
GROUP "I"

CONNECTION DIAGRAM:
GROUP "J"

CONNECTION DIAGRAM:
GROUP "K"

CONNECTION DIAGRAM:
GROUP "L"

CONNECTION DIAGRAM:
GROUP "M"

CONNECTION DIAGRAM:
GROUP "N"

CONNECTION DIAGRAM:
GROUP "P"

MICRON POWER DELIVERY

CONTROL TRANSFORMER ACCESSORIES
CATALOG
NUMBER

APPROX.
WEIGHT
LBS
KG

TPTC-2001
TPTC-2002
TPTC-2006

IP-20 SAFETOUCH™ COVERS
10PACK 4TERM.
10PACK 6TERM.
10PACK UNIVERSAL PRI BLOCK

1.0
1.0
1.0

0.5
0.5
0.5

FKTP-1001

PRIMARY CL "CC" FUSE KIT

0.25

0.1

CL. "CC" PRI.

OPTIONAL FACTORY INSTALLED FUSE HOLDERS
P/N SUFFIX = RB, RK, RX, RJ, RR
RY, RG, RL, RN, RC, -8

N/A

*NON-REJECTION VERSION AVAILABLE
ON ALL FACTORY INSTALLED PRIMARY
FUSEBLOCK OPTIONS

1/4 X 1-1/4 SEC.
9/16 X 2 SEC.

P/N SUFFIX = JQ, XQ
P/N SUFFIX = JM, XM

N/A
N/A

514-1661-01C
514-1661-02C

BULK FUSE CLIPS
(2 NECESSARY) 13/32 X 1-1/2 (STD)
(2 NECESSARY) 1/4 X 1-1/4 (OPT)

N/A
N/A

514-1650
514-1652
514-1620-02

BULK JUMPERS
J-2
J-3
Flat

N/A
N/A
N/A

TRANSFORMER ACCESSORY INTERCHANGE MATRIX

STANDARD SUFFIX
JK, JKF, JKH
XK, XKF, XKH
XX, XXF, XXH
XJ, XJF, XJH
JJ, JJF, JJH
JM, JMF, JMH
XM, JMF, JMH
JQ, JQF, JQH
XQ, XQF, XQH
JX, JXF, JXH
-1, -1F, -1H

15

>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>

DUAL PRIMARY
FUSED SUFFIX
RB, RBF, RBH
RK, RKF, RKH
RX, RXF, RXH
RJ, RJF, RJH
RR, RRF, RRH
RY, RYF, RYH
RG, RGF, RGH
RL RLF, RLH
RN, RNF, RNH
RC, RCF, RCH
-8, -8F, -8H

MICRON POWER DELIVERY

PRIMARY FUSE KIT # FKTP-1001
SERIES 2 INSTRUCTIONS ON NEXT PAGE

In addition to factory installed primary fusing capability
Micron offers a primary fuse kit for ImperviTRAN and
ValuTRAN intended for field installation. The
primary fuse kit includes a 2-pole Class "CC" fuse
block, instructions and all associated mounting
hardware. Addititonally, this fuse block will fit most
competitive units. To order this kit, use catalog number
FKTP-1001. The primary fuse kit, when installed, will
add a maximum of 11/16" to the transformer "A"
dimension and 1-15/16" to the "C" dimension.
Installed as indicated.
1. Loosen two outer screws on primary side of
transformer. On 6 position shell leave 2 spaces
open between brackets.
2. Capture mounting brackets and necessary leads
under terminal screws and tighten.
Recommended torque 30 in-lbs.
3. Affix fuse block to mounting bracket with
supplied screws.

16

IP-20 COVER KIT # TPTC-2006

4. Remove two nuts or screws holding primary fuse block to
transformer. On FKTP-1001 kits, perform step #5 prior to
affixing block to brackets.
5. Install retaining clips in base of fuse block. Secure with nuts
or screws as appropriate.
6, 6a. Install fuse in cover and snap cover in place. When installed
cover cannot be removed without releasing tab from detent (6a).
A tip of a pen will suffice.
GLOBALTRAN ACCESSORIES
A number of fusing accessories are available for the
GlobalTRAN product line. Please contact Micron
with your design requirements.

MICRON POWER DELIVERY

PRIMARY FUSE KIT # FKTP-1001

SERIES 2 INSTRUCTIONS

In addition to factory installed primary fusing capability
Micron offers a primary fuse kit for units with integral
accessory mounting plate (#2) intended for field installation
on all catalog standard SERIES 2 units.
The primary fuse kit includes a 2-pole Class "CC" fuse
block, instructions and all associated mounting
hardware. To order this kit, use catalog number
FKTP-1001. The primary fuse kit, when installed, will
add a maximum of 1-3/8" to the "C" dimension.
(as measured from the top of the plate)
Installation instructions.
1. Connect one end of the 2 primary leads (#1) under the
appropriate primary terminal screws. Secure screws
to 16 in-lbs <500VA and 30 in-lbs 500VA and larger.
2. Insert locking clips (#4) oriented as shown into the fuse
block (#3) pockets. Use caution in choosing screw length
if locking clips are not used.
3. Attach clips and fuse block to accessory mounting plate
(#2) using screws (#5). Recommended torque 16 in-lbs.
4. Insert fuses (not supplied) into fuse block followed by fuse
fuse block covers (#6) (IF ORDERED) with lock slots (#6a)
matching tip of the clips, as shown. Press down until cover locks.
Refer to primary fuse chart for recommended fuses.
Cover cannot be removed without releasing tab from
detent (#6a). A tip of a pen will suffice.
5. Connect trhe other end of the 2 primary leads (#1) under the
screws on each of the 2 poles on the fuse block (#3a) and
secure to 20 inch-pounds.
6. Apply primary voltage to the opposite end of the fuse block
(#3b).

Additionally the mounting plate (#2) can be utilized to mount other
accessories such as DIN rail. Use caution in choosing screw length.

17

MICRON POWER DELIVERY

MICRON STANDARD FUSE DIMENSION IS 13/32 X 1-1/2 "MIDGET" FUSE

MAXIMUM ACCEPTABLE RATING OF SECONDARY OVERCURRENT PROTECTION
Secondary VA Rating
Voltage
25
23
1-8/10
24
1-6/10
25
1-6/10
90
4/10
95
4/10
100
4/10
110
3/10
115
3/10
120
3/10
220
15/100
230
15/100
240

50
3-1/2
3-2/10
3-2/10
8/10
8/10
8/10
3/4
6/10
6/10
3/10
3/10
3/10

75
5
5
5
1-1/4
1-1/4
1-1/4
1-1/8
1
1
1/2
1/2
1/2

100
7
6-1/4
6-1/4
1-8/10
1-6/10
1-6/10
1-1/2
1-4/10
1-1/4
3/4
6/10
6/10

150
10
10
10
2-1/2
2-1/2
2-1/2
2-1/4
2
2
1-1/8
1
1

200
12
12
12
3-1/2
3-1/2
3-2/10
3
2-8/10
2-1/2
1-1/2
1-1/4
1-4/10
1-1/4

250
15
15
15
4-1/2
4
4
3-1/2
3-1/2
3-2/10
1-8/10
1-6/10
1-8/10
1-6/10

300
20
20
15
5
5
5
4-1/2
4
4
2-1/4
2
2

350
20
20
20
6-1/4
6
5-6/10
5
5
4-1/2
2-1/2
2-1/4
2-1/2
2-1/4

500
30
30
25
9
8
8
7-1/2
7
6-1/4
3-1/2
3-2/10
3-1/2
3-2/10

750
45
40
40
12
12
12
10
10
10
5-6/10
5
5

SECONDARY CURRENT = TRANSFORMER VA ÷ SECONDARY VOLTS
If the rated secondary current is less than 9 amps, the maximum rating of the overcurrent device is 167%; 9 amps or more, the maximum
rating of the overcurrent device is 125%. If 125% does not correspond to a standard fuse rating, the next highest standard rating may be
used.
Reference: NEC 430-72(c) exception #2; 450-3(b) 1 & 2; UL 508, 32.7; UL 845, 11.16 & 11.17.

18

MICRON POWER DELIVERY

GLOBALTRAN

GlobalTRAN products carry the CE mark, certifying 100%
compliance with requirements of EN61558. Additionally all
GlobalTRAN products are designed to deliver the full nameplate VA
rating.

Features and Benefits
Lead -free solder joints
 Provides RoHS compliant construction

Encapsulated from 25Va through 5KVa
 Establishes product similarity throughout the product range

Fully encapsulated coil
 Tough environment-proof construction
 Eases wire routing around the transformer

Full nameplate VA rating
 Eliminates guesswork

Molded terminals as an integral part of the coil
Largest standard voltage selection in the industry
 Easily adaptable to slot and Phillips driver tools
 Solves “availability problem” for many OEM design-in opportunities
 Robust physical support instead of “floating” terminal strips
 Both 4 and 6 terminals, or the combination, available
IP-20 level covers installed
 Meets IEC-529 protection rating

UL/CSA/cUL/CE Family Listing
 Absolute flexibility of special design capability for 600 volt class product

CE CONTROL TRANSFORMERS
GENERAL SPECIFICATIONS:
STYLE: IMPERVITRAN
APPROVALS: UL LISTED FILE# E46323/ CSA APPROVED FILE# LR27533, EN 61558-2-2
TEMP CLASS: 105°C/130°C/180°C
VA SIZES: 50-5000
SUFFIX DESCRIPTION:
TWO LETTER SUFFIX
= TEMP CLASS 105C
THREE LETTER SUFFIX ENDING "F" = TEMP CLASS 130C
THREE LETTER SUFFIX ENDING "H" = TEMP CLASS 180C
GLOBALTRAN:
GROUP "A"
CATALOG
NUMBER
VOLTAGE:
PRI: 220x440, 230x460, 240x480
SEC: 110/115/120
VA
AMPS
B050-2001-GA
50
0.43
B075-2002-GA
75
0.65
B100-2003-GA
100
0.87
B150-2004-GAF
150
1.30
B200-2005-GAF
200
1.74
B250-2006-GAF
250
2.17
B300-2007-GAF
300
2.61
B350-2008-GAF
350
3.04
B500-2009-GAF
500
4.35
B750-2010-GAF
750
6.52
B1K0-2008-GAH
1000
8.70
B1K5-2009-GAH
1500
13.04
B2K0-2010-GAH
2000
17.39
B3K0-2011-GAH
3000
26.09
B5K0-2012-GAH
5000
45.45
GROUP "B"

B050-2011-GA
B075-2012-GA
B100-2013-GA
B150-2014-GAF
B200-2015-GAF
B250-2016-GAF
B300-2017-GAF
B350-2018-GAF
B500-2019-GAF
B750-2020-GAF
B1K0-2028-GAF

VOLTAGE:
PRI: 240x480
SEC: 24
VA
AMPS
50
2.08
75
3.13
100
4.17
150
6.25
200
8.33
250
10.42
300
12.50
350
14.58
500
20.83
750
31.25
1000
41.67

GROUP "C"

B050-2021-GA
B075-2022-GA
B100-2023-GA
B150-2024-GAF
B200-2025-GAF
B250-2026-GAF
B300-2027-GAF
B350-2028-GAF
B500-2029-GAF
B750-2030-GAF
B1K0-2048-GAF

20

VOLTAGE:
PRI: 120x240
SEC: 24
VA
AMPS
50
2.08
75
3.13
100
4.17
150
6.25
200
8.33
250
10.42
300
12.50
350
14.58
500
20.83
750
31.25
1000
41.67

GLOBALTRAN:
GROUP "D"
CATALOG
NUMBER
VOLTAGE:
PRI: 550/575/600
SEC: 110/115/120
VA
B050-2041-GA
50
B075-2042-GA
75
B100-2043-GA
100
B150-2044-GAF
150
B200-2045-GAF
200
B250-2046-GAF
250
B300-2047-GAF
300
B350-2048-GAF
350
B500-2049-GAF
500
B750-2050-GAF
750

AMPS
0.43
0.65
0.87
1.30
1.74
2.17
2.61
3.04
4.35
6.52

GROUP "E"
VOLTAGE:
PRI: 380/400/415
SEC: 110x220
VA
B050-2061-GA
50
B075-2062-GA
75
B100-2063-GA
100
B150-2064-GAF
150
B200-2065-GAF
200
B250-2066-GAF
250
B300-2067-GAF
300
B350-2068-GAF
350
B500-2069-GAF
500
B750-2070-GAF
750

AMPS
.46/.23
.68/.34
.91/.46
1.37/.69
1.82/.91
2.28/1.14
2.72/1.36
3.18/1.59
4.55/2.27
6.82/3.41

GROUP "F"
VOLTAGE:
PRI: 208/230/460
SEC: 24/115
VA
B050-2101-GA
50
B075-2102-GA
75
B100-2103-GA
100
B150-2104-GAF
150
B200-2105-GAF
200
B250-2106-GAF
250
B300-2107-GAF
300
B350-2108-GAF
350
B500-2109-GAF
500
B750-2110-GAF
750
B1K0-2188-GAH
1000

AMPS
2.08/.44
3.13/.65
4.17/.87
6.25/1.3
8.33/1.74
10.42/2.17
12.50/2.61
14.58/3.04
20.83/4.35
31.25/6.52
41.67/8.70

MICRON POWER DELIVERY

CE CONTROL TRANSFORMERS
GLOBALTRAN:
GROUP "G"
CATALOG
NUMBER
VOLTAGE:
PRI: 380
SEC: 24
B050-2051-GA
B075-2052-GA
B100-2053-GA
B150-2054-GAF
B200-2055-GAF
B250-2056-GAF
B300-2057-GAF
B350-2058-GAF
B500-2059-GAF
B750-2060-GAF

VA
50
75
100
150
200
250
300
350
500
750

GLOBALTRAN:
GROUP "I"
CATALOG
NUMBER
VOLTAGE:
PRI: 208/230/400/460/575
SEC: 24*/115/230
AMPS
VA
AMPS
2.08 B250-2263-GAF
250
10.4/2.2/1.1
3.13 B300-2264-GAF
300
12.5/2.6/1.3
4.17 B350-2265-GAF
350
14.6/3.0/1.5
6.25 B500-2266-GAF
500
20.8/4.3/2.2
8.33 B750-2267-GAF
750
31.3/6.5/3.3
10.42 B1K0-2268-GAH
1000
41.7/8.7/4.3
12.50 B1K5-2269-GAH
1500
13.04/6.52
14.58 B2K0-2270-GAH
2000
17.39/8.70
20.83 B3K0-2271-GAH
3000
26.09/13.04
31.25 B5K0-2272-GAH
5000
43.48/21.74
* 24 AVAILABLE THROUGH 1Kva

GROUP "H"
VOLTAGE:
PRI: 208-600
SEC: 85-130
B250-2283-GAF
B300-2284-GAF
B350-2285-GAF
B500-2286-GAF
B750-2287-GAF
B1K0-2288-GAH
B1K5-2289-GAH
B2K0-2290-GAH
B3K0-2291-GAH

21

VA
250
300
350
500
750
1000
1500
2000
3000

AMPS
1.92
2.31
2.69
3.85
5.77
7.69
11.54
15.38
23.08

GROUP "J"
VOLTAGE:
PRI: 230/400/460/575
SEC: 24/115
VA
B250-2243-GAF
250
B300-2244-GAF
300
B350-2245-GAF
350
B500-2246-GAF
500
B750-2247-GAF
750
B1K0-2248-GAH
1000

AMPS
10.4/2.2
12.5/2.6
14.6/3.0
20.8/4.3
31.3/6.5
41.7/8.7

MICRON POWER DELIVERY

4 TERMINAL

A

D

CATALOG GROUPS
P/N
A
A
IN
MM
B050-2001-GA
3.38
86
B075-2002-GA
3.38
86
B100-2003-GA
3.38
86
B150-2004-GAF
3.75
95
B200-2005-GAF
3.75
95
B250-2006-GAF
4.00
102
B300-2007-GAF
4.38
111
B350-2008-GAF
4.88
124
B500-2009-GAF
5.13
130
B750-2010-GAF
7.00
178
B1K0-2008-GAH
6.63
168
B1K5-2009-GAH
7.31
186
B2K0-2010-GAH
8.13
203
B3K0-2011-GAH
8.06
202
B5K0-2012-GAH
10.00
250

22

B
IN
3.00
3.38
3.75
4.50
4.50
4.50
4.50
5.25
5.25
5.25
6.38
6.75
6.75
9.00
9.00

MM
76
86
95
114
114
114
114
133
133
133
162
172
172
225
225

C

B

6 TERMINAL

E

DIMENSIONS INCHES (MM)
C
D
IN
MM
IN
MM
3.00
76
2.44
61
3.25
83
2.44
61
3.50
89
2.44
61
4.00
102
2.44
61
4.00
102
2.81
71
4.00
102
3.19
81
4.00
102
3.75
95
4.50
114
3.38
86
4.50
114
4.38
111
4.50
114
5.88
149
5.50
140
3.75
95
6.00
152
5.00
127
6.00
152
5.25
133
8.00
200
5.25
133
8.00
200
7.19
183

E
IN
2.50
2.81
3.13
3.75
3.75
3.75
3.75
4.38
4.38
4.38
5.31
6.13
6.13
7.50
7.50

MM
64
71
79
95
95
95
95
111
111
111
135
156
156
191
191

APPROX
WEIGHT
LBS
3.4
4.8
5.9
8.5
10.0
11.0
13.0
15.0
20.0
29.8
35.0
40.0
45.0
65.2
104.8

B
B050-2011-GA
B075-2012-GA
B100-2013-GA
B150-2014-GAF
B200-2015-GAF
B250-2016-GAF
B300-2017-GAF
B350-2018-GAF
B500-2019-GAF
B750-2020-GAF
B1K0-2028-GAF

3.38
3.38
3.38
4.00
3.75
4.00
4.38
4.50
5.13
7.00
7.00

86
86
86
102
95
102
111
114
130
178
178

3.00
3.38
3.75
4.50
4.50
4.50
4.50
5.25
5.25
5.25
6.38

76
86
95
114
114
114
114
133
133
133
162

3.00
3.25
3.50
4.00
4.00
4.00
4.00
4.50
4.50
5.00
6.00

76
83
89
102
102
102
102
114
114
127
152

2.19
2.19
2.44
2.44
2.81
3.19
3.75
3.38
3.88
5.38
3.75

56
56
61
62
71
81
95
86
99
137
95

2.50
2.81
3.13
3.75
3.75
3.75
3.75
4.38
4.38
4.38
5.31

64
71
80
95
95
95
95
111
111
111
135

3.4
4.2
5.9
8.5
10.0
11.0
13.2
14.9
19.2
28.1
30.0

C
B050-2021-GA
B075-2022-GA
B100-2023-GA
B150-2024-GAF
B200-2025-GAF
B250-2026-GAF
B300-2027-GAF
B350-2028-GAF
B500-2029-GAF
B750-2030-GAF
B1K0-2048-GAF

3.38
3.38
3.38
3.75
3.75
4.00
4.38
4.50
5.13
7.00
7.00

86
86
86
95
95
102
111
114
130
178
178

3.00
3.38
3.75
4.50
4.50
4.50
4.50
5.25
5.25
5.25
6.38

76
86
95
114
114
114
114
133
133
133
162

3.00
3.25
3.50
4.00
4.00
4.00
4.00
4.50
4.50
4.50
6.00

76
83
89
102
102
102
102
114
114
114
152

2.19
2.19
2.44
2.44
2.81
3.19
3.75
3.38
3.88
5.88
3.75

55
56
61
61
70
81
95
86
99
149
95

2.50
2.81
3.13
3.75
3.75
3.75
3.75
4.38
4.38
4.38
5.31

64
71
79
95
95
95
95
111
111
111
135

3.4
4.2
5.9
8.5
10.0
11.0
13.2
14.9
19.2
29.8
31.0

D
B050-2041-GA
B075-2042-GA
B100-2043-GA
B150-2044-GAF
B200-2045-GAF
B250-2046-GAF
B300-2047-GAF
B350-2048-GAF
B500-2049-GAF
B750-2050-GAF

3.38
3.38
3.38
3.75
3.75
4.00
4.38
4.50
5.13
7.00

86
86
86
95
95
102
111
114
130
178

3.00
3.38
3.75
4.50
4.50
4.50
4.50
5.25
5.25
5.25

76
86
95
114
114
114
114
133
133
133

3.00
3.25
3.50
4.00
4.00
4.00
4.00
4.50
4.50
4.50

76
83
89
102
102
102
102
114
114
114

2.44
2.44
2.44
2.44
3.00
3.19
3.75
3.38
4.38
5.38

61
61
61
61
76
81
95
86
111
137

2.50
2.81
3.13
3.75
3.75
3.75
3.75
4.38
4.38
4.38

64
71
80
95
95
95
95
111
111
111

3.4
4.8
5.9
8.5
10.0
11.0
13.0
15.0
20.0
28.0

MICRON POWER DELIVERY

4 TERMINAL

A

D

CATALOG GROUPS
P/N
A
E
IN
MM
B050-2061-GA
3.38
86
B075-2062-GA
3.38
86
B100-2063-GA
3.38
86
B150-2064-GAF
3.75
95
B200-2065-GAF
3.75
95
B250-2066-GAF
4.00
102
B300-2067-GAF
4.38
111
B350-2068-GAF
4.75
121
B500-2069-GAF
5.13
130
B750-2070-GAF
7.00
178
F
B050-2101-GA
B075-2102-GA
B100-2103-GA
B150-2104-GAF
B200-2105-GAF
B250-2106-GAF
B300-2107-GAF
B350-2108-GAF
B500-2109-GAF
B750-2110-GAF
B1K0-2188-GAH

23

B
IN
3.00
3.38
3.75
4.50
4.50
4.50
4.50
4.50
5.25
5.25

MM
76
86
95
114
114
114
114
114
133
133

C

B

6 TERMINAL

E

DIMENSIONS INCHES (MM)
C
D
IN
MM
IN
MM
3.00
76
2.44
61
3.50
89
2.44
61
3.50
89
2.44
61
4.00
102
2.44
61
4.00
102
3.00
76
4.00
102
3.19
81
4.00
102
3.75
95
4.00
102
3.75
95
4.50
114
4.38
111
4.50
114
5.88
149

E
IN
2.50
2.81
3.13
3.75
3.75
3.75
3.75
3.75
4.38
4.38

MM
64
71
79
95
95
95
95
95
111
111

APPROX
WEIGHT
LBS
3.4
4.8
5.9
8.5
10.0
11.0
13.0
15.0
20.0
27.0

3.38
3.38
3.63
3.75
4.38
4.75
4.88
4.88
5.63
6.63
7.06

86
86
92
95
111
121
124
124
143
168
179

3.00
3.38
3.75
4.50
4.50
4.50
5.25
5.25
5.25
6.38
6.38

76
86
95
114
114
114
133
133
133
162
162

3.25
3.50
3.50
4.00
4.00
4.00
4.50
4.50
4.50
6.00
6.00

83
89
89
102
102
102
114
114
114
152
152

2.25
2.44
3.19
2.81
3.44
3.75
3.88
3.88
5.88
5.06
5.06

56
61
81
71
87
95
99
99
149
129
129

2.81
3.13
3.13
3.75
3.75
3.75
4.38
4.38
4.38
5.31
5.31

71
79
79
95
95
95
111
111
111
111
135

4.2
5.9
7.9
10.0
12.8
14.0
16.8
19.2
29
29.8
30.2

G
B050-2051-GA
B075-2052-GA
B100-2053-GA
B150-2054-GAF
B200-2055-GAF
B250-2056-GAF
B300-2057-GAF
B350-2058-GAF
B500-2059-GAF
B750-2060-GAF

3.38
3.38
3.38
3.63
3.75
4.00
4.38
4.50
5.13
7.00

86
86
86
91
95
102
111
114
130
178

3.00
3.38
3.75
3.75
4.50
4.50
4.50
5.25
5.25
5.25

76
86
95
95
114
114
114
133
133
133

3.00
3.25
3.50
3.50
4.00
4.00
4.00
4.50
4.50
4.50

76
83
89
89
102
102
102
114
114
114

2.19
2.19
2.44
3.00
2.81
3.19
3.75
3.88
3.88
5.88

55
56
61
61
70
81
95
99
99
149

2.50
2.81
3.13
3.13
3.75
3.75
3.75
4.38
4.38
4.38

64
71
79
79
95
95
95
111
111
111

3.5
4.2
5.9
9.6
11.3
13.2
14.9
19.2
29.8

H
B250-2283-GAF
B300-2284-GAF
B350-2285-GAF
B500-2286-GAF
B750-2287-GAF
B1K0-2288-GAH
B1K5-2289-GAH
B2K0-2290-GAH
B3K0-2291-GAH

4.25
4.75
5.00
5.50
7.38
7.00
7.75
7.63
8.56

108
121
127
140
187
178
199
194
217

4.50
4.50
4.50
5.25
5.25
6.38
6.75
9.00
9.00

114
114
114
133
133
162
171
229
229

4.00
4.00
4.00
4.25
4.50
5.50
6.00
8.00
7.63

102
102
102
108
114
140
152
203
194

3.44
3.75
3.75
3.88
5.88
5.06
5.00
4.81
5.75

86
95
95
99
149
129
127
122
146

3.75
3.75
3.75
4.38
4.38
5.31
6.13
7.50
7.50

95
95
95
111
111
135
156
191
191

11.4
13.6
14.2
17.4
27.5
27.9
43.1
56.0
76.2

MICRON POWER DELIVERY

4 TERMINAL

A

D

CATALOG GROUPS
P/N
A
I
IN
MM
B250-2263-GAF
4.75
121
B300-2264-GAF
5.25
133
B350-2265-GAF
5.38
137
B500-2266-GAF
5.63
168
B750-2267-GAF
7.44
189
B1K0-2268-GAH
7.75
199
B1K5-2269-GAH
7.75
199
B2K0-2270-GAH
7.63
194
B3K0-2271-GAH
8.75
222
B5K0-2272-GAH
10.44
265
J
B250-2243-GAF
B300-2244-GAF
B350-2245-GAF
B500-2246-GAF
B750-2247-GAF
B1K0-2248-GAH

24

4.75
5.00
5.13
5.75
7.00
8.13

121
127
130
146
178
207

B
IN
4.50
4.50
5.25
5.25
6.38
6.75
6.75
9.00
9.00
9.00

MM
114
114
133
133
162
171
171
229
229
229

4.50
4.50
5.25
5.25
6.38
6.38

114
114
133
133
162
162

C

B

E

DIMENSIONS INCHES (MM)
C
D
IN
MM
IN
MM
4.00
102
4.75
121
4.00
102
4.75
121
4.50
114
4.38
111
4.50
114
5.88
149
6.00
152
5.06
129
6.25
159
5.00
127
6.00
152
5.00
127
7.63
194
4.81
122
7.63
194
5.94
151
7.63
194
7.63
194

4.00
4.00
4.50
4.50
6.00
6.00

102
102
114
114
152
152

6 TERMINAL

3.75
4.75
3.88
4.88
5.06
5.06

95
121
99
124
129
129

E
IN
3.75
3.75
4.38
4.38
5.31
6.13
6.13
7.50
7.50
7.50

MM
95
95
111
111
135
156
156
191
191
191

3.75
3.75
4.38
4.38
5.31
5.31

95
95
111
111
135
135

APPROX
WEIGHT
LBS
14.9
17.4
17.8
26.6
32.5
44.0
45.4
58.6
92.9
127.4

14.3
15.8
16.5
20.5
28.8
34.9

MICRON POWER DELIVERY

CONNECTION DIAGRAMS - GLOBALTRAN

25

CONNECTION DIAGRAM:
GROUP "A"

CONNECTION DIAGRAM:
GROUP "B"

CONNECTION DIAGRAM:
GROUP "D"

CONNECTION DIAGRAM:
GROUP "E"

CONNECTION DIAGRAM:
GROUP "G"

CONNECTION DIAGRAM:
GROUP "H"

CONNECTION DIAGRAM:
GROUP "I"
Above 1 Kva

CONNECTION DIAGRAM:
GROUP "I"
Through 1 Kva

CONNECTION DIAGRAM:
GROUP "C"

CONNECTION DIAGRAM:
GROUP "F"

CONNECTION DIAGRAM:
GROUP "J"

MICRON POWER DELIVERY

MEDIUM VOLTAGE CONTROL TRANSFORMERS

Micron medium voltage control transformers have:
* 130° C Insulation system.
* 24" Mimimum primary lead length.
* 60Hz.
* HIPOT - 7,400 volts for 2400 primary.
* HIPOT - 11,500 volts for 4160 and 2400 primaries.
* 750 VA - Epoxy impregnated coils.
* 1 KVA and larger - Epoxy potted primary coils.

DIMENSIONS

CONTROL TRANSFORMERS:
MEDIUM VOLTAGE
CATALOG
OUTPUT
NUMBER
VA
AMPS
A
VOLTAGE:
IN
MM
*PRI: 4200
PRI: 2400
SEC: 120
H750-0030
*
H750-0031
*PRI: 4160
PRI: 2400
SEC: 120/240
H1K0-0010
H1K0-0015
*
HN1K5F1519P
HN1K5G1519P
*
HN2K0F1519P
HN2K0G1519P
*
HN3K0F1519P
HN3K0G1519P
*

26

B
IN

MM

DIMENSIONS INCHES (MM)
C
D
IN
MM
IN
MM

E
IN

APPROX.
WEIGHT
MM
LBS

750
750

6.25
6.25

6.63
6.63

168
168

6.38
6.38

162
162

5.81
5.81

148
148

5.25
5.25

133
133

5.31
5.31

135
135

30.5
30.7

1000
1000
1500
1500
2000
2000
3000
3000

8.33/4.17
8.33/4.17
12.50/6.25
12.50/6.25
16.67/8.33
16.67/8.33
25.00/12.50
25.00/12.50

6.25
6.25
7.00
7.00
7.94
7.94
9.75
9.75

159
159
178
178
202
202
248
248

7.56
7.56
9.00
9.00
9.00
9.00
9.00
9.00

192
192
229
229
229
229
229
229

6.38
6.38
7.63
7.63
7.63
7.63
7.63
7.63

162
162
194
194
194
194
194
194

3.50
3.50
4.25
4.25
5.19
5.19
7.00
7.00

89
89
108
108
132
132
178
178

5.63
5.63
6.50
6.50
6.50
6.50
6.50
6.50

143
143
165
165
165
165
165
165

31.3
31.1
53.7
52.2
65.4
58.2
99.9
101.0

MICRON POWER DELIVERY

DINergy ™ Industrial DIN Rail Power Supplies

Micron DINergy™ Power Supply Selection Guide
Output Output Voltage
Output
Input
Power Voltage
Adj.
Current
Peak
Voltage
Model
(Watts) (VDC)
Range
(A)
Current (A) (VAC)
MDP30-24-1
30
24
22 - 28
1.25
1.70
90-255
MDP30-15-1
30
15
14 - 18
2.0
2.70
90-255
MDP30-12-1
30
12
10 - 14
2.5
3.40
90-255
MDP30-5-1
30
5
4.5 - 5.5
4.0
5.40
90-255
MDP50-24-1
50
24
22 - 28 2.27 - 1.79
3.09
90-255
MDP50-12-1
50
12
10 - 14 5.0 - 3.57
6.80
90-255
MD60-24-1
60
24
22 - 28
2.5
3.0
85-264
MD60-12-1
54
12
10 - 16
4.5
5.4
85-264
MD60-48-1
60
48
46 - 52
1.3
1.5
85-264
MD120-24-1
120
24
22 - 28
5.0
6.0
85-264
MD120-12-1
96
12
10 - 16
8.0
9.6
85-264
MD120-48-1
120
48
46 - 52
2.5
3.0
85-264
MD240-24-1
240
24
22 - 28
10.0
12.0
85-264
MD240-12-1
180
12
11 - 14
15.0
18.0
85-264
MD240-48-1
240
48
46 - 52
5.0
6.0
85-264
MD480-24-1
480
24
22 - 28
20.0
24.0
85-264
MD480-36-1
480
36
34 - 40
13.0
16.0
85-264
MD480-24-1
480
48
46 - 52
10.0
12.0
85-264
MD-PDMA
480
24
N/A
20.0 MAX 24.0 MAX
85-264
REDUNDANCY DIODE MODULE
MD-VSB240-24-1
240
24
N/A
10.0
N/A
24VDC
VOLTAGE SAG BUFFER
+/-10%
+/-5%
MD-LAB-DINBRKTA N/A
24
N/A
3.4AH/20HR
N/A
N/A
MD-LAB-DINBRKTB N/A
24
N/A
1.3AH/20HR
N/A
N/A
MD-DINBRKTA
BRACKET ASSEMBLY FOR 3.4AH SLA
MD-DINBRKTB
BRACKET ASSEMBLY FOR 1.3AH SLA

27

Size
WxDxH(mm)
22.5X100X90
22.5X100X90
22.5X100X90
22.5X100X90
32X102X90
32X102X90
50x105x124
50x105x124
50x105x124
65x105x124
65x105x124
65x105x124
87x124x130
87x124x130
87x124x130
156x126x130
156x126x130
156x126x130
50x105x124
76X116X130
145X77X143
95X81X105
145X77X143
95X81X105

MICRON POWER DELIVERY

PMA, PCMA, PMAS, PCMAS, PMN & PCMN encapsulated designs feature reduced stand-by power consumption and are
available in various power ranges from 5 watts – 100 watts. The primary voltage range of 90 -264 Vac / 100 -353 Vdc with
available single, dual or triple output voltages makes these the logical choice for PCB and chassis mount applications in otherwise
hostile environments.

The PCMASC power supply has been specifically designed to operate at -55ºC and is available at a power rating of 100 watts @
24Vdc.

PMmed / PCMmed encapsulated designs for medical applications are available in power ranges of from 15 watts – 100 watts.
The primary voltage range of 90 -264 Vac / 100 -353 Vdc with single output selections for PCB and chassis mount applications
where EN/UL 60 601-1/EN/UL 60 950-1 (2nd Edition) is necessary.

Protected from vibration and the environment, the HMA, HMG, HMN, encapsulated DIN-Mount designs are available in power
ranges of 15 and 30 watts with single, dual or triple output voltages. The HSA design is available through 120 watts with choices
of multiple outputs through 48Vdc. The HSAC variant is certified to operate at -55ºC as well.

The HSD product is a DC/DC DIN-Mount device in power ratings of 15 and 30 watts.

28

MICRON POWER DELIVERY

…MTM Power DC/DC converters for vehicles and
industrial applications…

… For rugged vehicular or industrial applications, MTM Power DC/DC converters are available as a standard with
single dual or triple outputs in various power ranges and if required as customized devices. Featuring isolation up to
4 kVac and available in metal or plastic case.
PMG/PCMG encapsulated DC/DC designs are available in power ratings of 15 and 30 watts and with up to three output
voltages.
PMD/PCMD encapsulated DC/DC designs through 400 watts or the PCMDS (space saving) through 650 watts for
vehicular applications.
PMD encapsulated DC/DC designs for industrial applications with power ratings from 1 watt – 350 watts.

MPK1, MPK2 plug-ins for 19” racks and other custom configurations utilize PMA, PMAS, PMN and PMG units and
allow for up to six different, galvanically isolated outputs to 100 watts. PMA19 35 is a 19” narrow profile 35 watt unit
available in 5, 12, 24 and 48 Vdc output voltage.

29

MICRON POWER DELIVERY

DRY TYPE TRANSFORMERS
GENERAL INFORMATION

Micron can provide a general purpose or buck-boost transformer to satisfy your industrial or commercial
application. Please refer to Catalog number LVGP-09A for further information

30

MICRON POWER DELIVERY

NOTES:

31

MICRON POWER DELIVERY

Micron Industries Corporation
Oak Brook, IL 60523
Phone: 800-664-4660
FAX: 630-516-1820
www.micronpower.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : M.A, Kitun
Create Date                     : 2011:06:16 11:52:13-05:00
Modify Date                     : 2011:09:09 15:19:12-05:00
Subject                         : control transformer catalog
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : M.A, Kitun
Description                     : control transformer catalog
Title                           : cct-04c
Creator Tool                    : Microsoft® Excel® 2010
Metadata Date                   : 2011:09:09 15:19:12-05:00
Producer                        : Microsoft® Excel® 2010
Document ID                     : uuid:debc2403-7e96-46ad-8347-5e46528ad403
Instance ID                     : uuid:ee3f5d4c-15c8-469a-9283-f47997be9238
Page Count                      : 32
EXIF Metadata provided by EXIF.tools

Navigation menu