Federal Signal PDF 223557 Catalog

2014-09-05

: Pdf 223557-Catalog 223557-Catalog 782979 Batch7 unilog

Open the PDF directly: View PDF PDF.
Page Count: 116

DownloadFederal Signal PDF  223557-Catalog
Open PDF In BrowserView PDF
007_122_62362_FedSig.qxd

1/31/08

12:30 AM

Page 30

FEDERAL SIGNAL CORPORATION

Vitalite ®
Rotating Warning
Light
Models 121 and 121A

LIGHT DUTY VEHICULAR
LIGHT
•

Available in 12VDC and 24VDC

•

Five dome colors

•

121 - Magnetic mount with
cigarette lighter cord and plug

•

121A - Integrated pipe and
surface mount

•

Model 121 - Type 3R,
IP32 enclosure

•

Model 121A - Type 4X,
IP66 enclosure

•

UL and cUL Listed and
CSA Certified

The Federal Signal Vitalite® Models 121 and 121A are compact,
rotating lights designed for vehicular applications. They feature a
parabolic reflector that rotates around an incandescent lamp,
providing 60 flashes per minute in all directions. Both Models are
available in five dome colors — amber, blue, clear, green and red.
The 121 comes with an integrated magnetic mount and steel
mounting plate. Power is supplied to the 121 via a 10-foot electrical
cord with a cigarette lighter type plug. The 121 is available in 12VDC.
The 121A rotating light is designed for both vehicular and in-plant
applications. This unit can be surface mounted or mounted on a
1
/2” pipe with the integrated pipe mount. The 121A is available in
12VDC and 24VDC. The enclosure is also rated Type 4x for a
water tight and dust tight seal.
Both Models are UL Listed.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

121

12VDC

3.0 amps

60

18,000

Magnetic

121A

12VDC

3.0 amps

60

18,000

Pipe/Surface

121A

24VDC

1.3 amps

60

4,000

Pipe/Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:01 PM

Page 31

VITALITE ® ROTATING WARNING LIGHT (121/121A)
Polycarbonate
Dome

Polycarbonate
Dome

Incandescent
Lamp
6.26"/
159 mm

6.75"/
172 mm

5.13"/130 mm

Model 121A
S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
121A
Net Weight:
Shipping Weight:
Height:
Diameter:
121
Net Weight:
Shipping Weight:
Height:
Diameter:

5.13"/130 mm

Magnetic
Mount

Model 121
HOW TO ORDER

300 Hours
Incandescent
-31°F to 150°F

300 Hours
Incandescent
-35°C to 66°C

1.8 lbs.
1.9 lbs.
6.26"
5.13"

0.79 kg
0.86 kg
159.0 mm
130.0 mm

2.2 lbs.
2.3 lbs.
6.75"
5.13"

1.0 kg
1.04 kg
172.0 mm
130.0 mm

• Specify model, voltage and color
• Please refer to Model Number Index
121/121A beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Magenta
Series A & B Domes on page 33

Part Number
K8444357A-02
K8444357A-01
K8444357A
K8444357A-04
K8444357A-05

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Dome, Red
Incandescent Lamp, 12VDC
Incandescent Lamp, 24VDC
Motor, Stepper
PC Board Assembly
Fax: 708.534.4852

K8444357A-03
K8107223A
K8107236A
K8444382A
K2001927A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:32 AM

Page 32

FEDERAL SIGNAL CORPORATION

Vitalite ®
Rotating Warning
Light
Model 121S

LIGHT DUTY WARNING LIGHT
•

Available in 120VAC

•

Five dome colors

•

Integrated 1/2 - inch pipe mount
and surface mount

•

Type 4X, IP66 enclosure

•

UL and cUL Listed and
CSA Certified

Federal Signal’s Model 121S is a compact, rotating warning light
designed for in-plant use. It features a parabolic reflector which
rotates around an incandescent lamp, providing 60 flashes per
minute in all directions. The 121S Vitalite® is available in five
dome colors (amber, blue, clear, green and red). It is UL
(Underwriters Laboratories) Listed, cUL Listed, and CSA Certified.
Federal Signal’s 121S comes ready to mount on a 1/2-inch pipe or
surface mount. Optional brackets simplify installation on walls or
in corners (see page 108). The enclosure is also rated Type 4x for
a water tight and dust tight seal.
The lamp projects an intense, fixed beam onto a parabolic reflector
which rotates 360°, producing 60 flashes per minute. The 121
features a twist and lock dome which allows for fast and easy
access to inspect and change the lamp.
This light is particularly useful as a signaling or warning device in
high ambient noise areas where it can supplement audible signaling devices. It is also effective alerting hazardous conditions or
dangerous areas.
Federal Signal’s Vitalite is an economical rotating warning light for
emergency warning or status indication in noisy areas.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

121S

120VAC 50/60Hz

0.36 amps

60

2,100

Pipe/Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:02 PM

Page 33

VITALITE ® ROTATING WARNING LIGHT (121S)

Polycarbonate
Dome

Incandescent
Lamp
6.26"/
159 mm

1/2" Pipe Mount
5.13"/130 mm

S P E C I F I C AT I O N S
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
Incandescent
-31°F to 150°F
2.0 lbs.
2.1 lbs.
6.26"
5.13"

Incandescent
-35°C to 66°C
0.91 kg
0.96 kg
159.0 mm
130.0 mm

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)
Wall Bracket (LWMB2)
• Please refer to Model Number Index
121S beginning on page 373

R E P L A C E M E N T PA RT S
Description (Current Series)
Dome, Amber, Series C
Dome, Blue, Series C
Dome, Clear, Series C
Dome, Green, Series C
Dome, Magenta, Series C
Dome, Red, Series C
Incandescent Lamp, 120V, Krypton Series C

Part Number
K8444357A-02
K8444357A-01
K8444357A
K8444357A-04
K8444357A-05
K8444357A-03
K8107251A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description (Older Series)
Motor, 120VAC
Dome, Amber, Series A and B
Dome, Blue, Series A and B
Dome, Clear, Series A and B
Dome, Green, Series A and B
Dome, Magenta, Series A and B
Dome, Red, Series A and B
Incandescent Lamp, 120V, Series A and B

Fax: 708.534.4852

Part Number
K8241A030-03
K8444B019A-12
K8444B019A-13
K8444B019A-14
K8444B019A-15
K8444B019A-17
K8444B019A-11
K8107181A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:22 AM

Page 42

FEDERAL SIGNAL CORPORATION

Explosion-Proof
Rotating Light
Model 121X

Federal Signal’s Model 121X rotating light flashes 90 times per
minute and produces a 360° visual signal. This explosion-proof
light has an incandescent lamp and is available in five lens colors
– amber, blue, clear, green and red.

DESIGNED FOR USE IN
EXPLOSION-PROOF
ATMOSPHERES

The Model 121X is UL Listed for Class I, Division 1, Groups C &
D; Class II, Division 1, Groups E, F & G; Class I, Division 2,
Groups A, B; and Class III. The 121X is CSA Certified, Marine
Rated and constructed to Type 4X, IP66 standards.

•

Available in 24VDC and 120VAC

•

Five lens colors

•

/4 - inch pendant mount standard;
other options available

•

Optional dome guard

•

Type 4X, IP66 enclosure

•

UL and cUL Listed, CSA Certified
and Marine Rated

This corrosion-resistant unit’s copper-free aluminum housing is
finished with a powder epoxy. All exposed hardware is constructed
of 316 grade stainless steel.

3

The 121X uses a synchronous motor to drive a parabolic reflector
around an incandescent lamp. This results in a 360° rotating
beam which is concentrated in a horizontal plane.
The 121X features a spring-clip mounted lens for quick access
when inspecting or relamping. A pendant mount is supplied and a
ceiling mount and 90° wall mount are available options. Installation
is simple; with the mounting box in place, the fixture is threaded
onto the mounting box, making the electrical connection.
Electrical continuity is made when five threads are engaged.
Federal Signal’s rugged 121X Warning Light is designed for
explosion-proof applications and/or corrosive environments. It is
ideal for use in indoor and outdoor areas such as oil rigs, mines,
refineries, and chemical plants.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

121X

24VDC

1.05 amps

90

2,350

3

121X

120VAC 60Hz

0.33 amps

90

1,800

3

/4" Pendant
/4" Pendant

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:42 AM

Page 43

EXPLOSION-PROOF ROTATING LIGHT (121X)

8.82"/224 mm
3
/4" Pendant
Mount

Electrical
Connection
Block

Motor

Cast Aluminum,
Corrosion-Resistant,
Explosion-Proof
Housing

15.63"/397 mm
Interior Lens

11.25"/285.8 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style
Ambient Temperature Range:
Net Weight:
Shipping Weight:
Height:
Diameter:

Lamp

Glass Dome

HOW TO ORDER
800 Hours
Incandescent
-31°F to 150°F
14.75 lbs.
18.9 lbs.
15.63"
8.82"

800 Hours
Incandescent
-35°C to 66°C
6.69 kg
8.57 kg
397.0 mm
224.0 mm

• Specify model, voltage and color
• Specify options:
Ceiling Mount Kit (CMXC)
Wall Mount (WMXC)
Dome Guard (DGXC)
• Please refer to Model Number Index
121X beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Exterior Dome Assembly, Clear
Interior Lens, Amber
Interior Lens, Blue
Interior Lens, Clear
Interior Lens, Green
Interior Lens, Red
Lamp, 24VDC
Lamp, 120VAC

Part Number
K8444C271A-01
K8444242A
K8444242A-01
K8444242A-02
K8444242A-03
K8444242A-04
K8107A041
K8444A173A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

24VDC Mechanism, Amber
24VDC Mechanism, Blue
24VDC Mechanism, Clear
24VDC Mechanism, Green
24VDC Mechanism, Red
120VAC Mechanism, Amber
120VAC Mechanism, Blue
120VAC Mechanism, Clear
120VAC Mechanism, Green
120VAC Mechanism, Red

Fax: 708.534.4852

K8444269A
K8444269A-01
K8444269A-02
K8444269A-03
K8444269A-04
K8444277A
K8444277A-01
K8444277A-02
K8444277A-03
K8444277A-04

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:53 AM

Page 108

FEDERAL SIGNAL CORPORATION

Starfire ®
Strobe/Incandescent
Combination Light
Model 131C

Federal Signal introduces a new hybrid signal designed specifically
for safety showers and emergency call stations.

OUR BRIGHTEST MEDIUM
DUTY STROBE…
PLUS A STEADY-BURN
INCANDESCENT

Inside the 131C are two light sources — a 7,000 hour incandescent
lamp and a 10,000 hour strobe tube. When power is present, the
incandescent lamp burns steady to draw attention to the location
of the emergency station and to indicate that the station is receiving
power. When an emergency activation occurs, the strobe begins
to flash, calling attention and indicating a status change.

•

Available in 24VDC and 120VAC

•

Five dome colors

The 131C measures less than nine inches high and six inches in
diameter, yet is highly visible; the emergency signal flashes with
an effective candela of 1000.

•

Both a 10,000 hour strobe tube
and a 7,000 hour incandescent

•

1

•

Type 3R enclosure
(Dome up orientation)

•

Surface mount kit optional

/2 - inch pipe mount

The fresnel dome is designed to stand up to impact and abuse
and is available in amber, blue, clear, green and red. The base of
the light is made of corrosion-resistant anodized aluminum. The
131C comes with a standard 1/2-inch pipe mount.

Operating
Current

Flash Rate/
Minute

Strobe Candela
ECP2
Peak1

24VDC

1.25 amps (strobe)
0.50 amps (incandescent)

80

2,000,000

1,000

120VAC

0.60 amps (strobe)
0.13 amps (incandescent)

80

2,000,000

1,000

Model

Voltage

131C
131C

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:21 AM

Page 109

STROBE/INCANDESCENT WARNING LIGHT (131C)

5.7"/144.8 mm
Fresnel Dome

High Intensity
Strobe Tube

5.81"/147.6 mm
Incandescent Lamp

Built-in Strobe
Power Supply

8"/203.2 mm

Anodized
Aluminum Base
8.5"/215.9 mm

Strobe Power
Earth Ground

S P E C I F I C AT I O N S
Lamp #1 Style:
Lamp #2 Style:
Net Weight:
Shipping Weight:
Height:
Diameter:

1/2"
Pipe Mount

Steady Burn Lamp Power

HOW TO ORDER
10,000 Hour Strobe
7,000 Hour Incandescent
2.0 lbs.
1.0 kg
3.4 lbs.
1.5 kg
8.5"
215.9 mm
5.7"
144.8 mm

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)
Wall Bracket (LWMB2)
Surface Mount Kit (K8444A211B)
• Please refer to Model Number Index
131C beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Dome Gasket

Part Number
K8422B428A-01
K8422B428A-02
K8422B428A
K8422B428A-03
K8422B428A-04
K8444A193A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 24VDC
PC Assembly, 120VAC
Strobe Tube
Incandescent Lamp (24VDC)
Incandescent Lamp (120VAC)

Fax: 708.534.4852

K2001260C
K2001188C
K8107178A
K8107210A
K8107194A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:09 AM

Page 82

FEDERAL SIGNAL CORPORATION

Starfire ® Strobe
Warning Lights
Models 131ST and 131DST

OUR BRIGHTEST MEDIUM
DUTY STROBE LIGHT
•

Available in 12-24VDC, 120VAC
and 240VAC

•

Five dome colors

•

10,000 hour strobe tube

•

Single or double flash strobe

•

1

•

Indoor use only

•

Type 3R, IP45 enclosure
(Dome up orientation)

•

UL and cUL Listed and
CSA Certified

/2 - inch pipe mount

5
WA

yyr

RRANT

Federal Signal’s Starfire® strobe warning lights are available in
single-flash (131ST) and double-flash (131DST) models. Through
precise timing of the strobe flash, the double flash unit produces
1,200 effective candela; the single flash unit produces 1,000
effective candela.
Starfire models are available in 12-24VDC, 120VAC (50/60Hz) and
240VAC (50/60Hz). All units are less than nine inches high and six
inches in diameter, but powerfully effective.
Starfire strobe warning lights contain their own strobe power
supply in the base of the light. The strobe flash tube is mounted in
an eight-pin octal socket base. The fresnel dome stands up to
impact and abuse and is available in amber, blue, clear, green and
red. The base of the light is made of corrosion-resistant anodized
aluminum. Each Starfire model comes with a standard 1/2-inch
pipe mount. An optional surface mount can be ordered.
Because of its convenient size and intense light output, the
Starfire strobes can be used for multiple applications. Excellent for
in-plant use, the Models 131ST/DST warn of hazardous conditions,
mark dangerous areas (either permanently or temporarily) and
mounts on lift trucks, cranes and other moving devices. These
powerful strobes can be used on emergency, utility, maintenance
or any other vehicle requiring emergency warning.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
ECP2
Peak1

131DST

12-24VDC

3.0-1.9 amps

803

1,000,000

1,200

1

131DST

120VAC

0.60 amps

80

3

1,000,000

1,200

1

131DST

240VAC

0.30 amps

80

3

1,000,000

1,200

1

131ST

12-24VDC

2.75-1.25 amps

80

2,000,000

1,000

1

131ST

120VAC 50/60Hz

0.60 amps

80

2,000,000

1,000

1

131ST

240VAC 50/60Hz

0.30 amps

80

2,000,000

1,000

1

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

3

Double Flash

4

Magnet and surface mount kits available

Mount4
/2" Pipe
/2" Pipe
/2" Pipe
/2" Pipe
/2" Pipe
/2" Pipe

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:19 AM

Page 83

STARFIRE ® STROBE WARNING LIGHT (131ST/131DST)
5.7"/144.8 mm
Fresnel Dome

High Intensity
Strobe Tube
5.81"/147.6 mm
Built-in Strobe
Power Supply

8"/203.2 mm

Anodized
Aluminum Base
8.5"/215.9 mm

1/2"
Pipe Mount

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Width:

HOW TO ORDER
10,000 Hours
Strobe
-31°F to 150°F
2.0 lbs.
3.4 lbs.
8.5"
5.7"

10,000 Hours
Strobe
-35°C to 66°C
1.0 kg
1.5 kg
215.9 mm
144.8 mm

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)
Wall Bracket (LWMB2)
Surface Mount (K8444A211B)
• Please refer to Model Number Index
131ST/131DST beginning on
page 376

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Dome, Magenta
Strobe Tube
Surface Mount Kit

Part Number
K8422B428A-01
K8422B428A-02
K8422B428A
K8422B428A-03
K8422B428A-04
K8422B428A-05
K8107178A
K8444A211B

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 12-24VDC (131ST)
PC Assembly, 120VAC (131ST)
PC Assembly, 240VAC (131ST)
PC Assembly, 12-24VDC (131DST)
PC Assembly, 120VAC (131DST)
PC Assembly, 120VAC (131DST)
PC Assembly, 240VAC (131DST)
Dome Gasket

Fax: 708.534.4852

K2001260C
K2001188C
K2001188C-01
K2001265D
K200865G
K200865G
K200865G-01
K8444A193A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:05 AM

Page 52

FEDERAL SIGNAL CORPORATION

Electraflash ®
Flashing Lights
Model 141

DESIGNED FOR INDUSTRIAL
OR VEHICULAR USE
•

Available in 12VDC, 24VDC,
36VDC, and 120VAC

•

Five dome colors

•

Surface mount or integrated
1
/2 - inch pipe mount

•

Type 3R enclosure

•

UL Listed and CSA Certified

Federal Signal’s Electraflash® Model 141 is an economical
incandescent flashing light. The Electraflash is less than six inches
high and six inches in diameter. It is available in five impactresistant fresnel dome colors: amber, blue, clear, green and red.
The 120VAC model is UL Listed and CSA Certified.
The Model 141 is available in 12VDC, 24VDC, 36VDC and
120VAC. This light consists of a flasher unit with an incandescent
bayonet lamp secured to its base (screw-in type lamp in
120VAC only).
The 12, 24 and 36VDC units each provide three holes for easy
flat surface mounting. The 120VAC unit is ready to mount on a
1
/2-inch pipe. Optional mounting brackets are available for the
120VAC unit, including the Model LWMB2 wall mount bracket and
the Model LCMB2 corner mount bracket.
Federal Signal’s economical flashing lights are designed for both
indoor and outdoor environments. Model 141’s convenient size
and intense light output are ideal for maintenance vehicles, fork
lifts, and other material handling equipment. The Electraflash can
effectively identify hazardous conditions or dangerous areas.
Federal Signal’s Electraflash is a compact warning light designed
specifically for use in light-duty industrial applications.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

141

12VDC

3.00 amps

70

325

Surface

141

24VDC

0.90 amps

70

125

Surface

141

36VDC

0.60 amps

70

200

Surface

141

120VAC 50/60Hz

0.38 amps

70

275

1

/2" Pipe

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:34 AM

Page 53

ELECTRAFLASH ® FLASHING LIGHT (141)
Fresnel
Dome

5.5"/139.7 mm

Incandescent
Lamp

Flasher
Unit

5.25"/
133.4 mm

5.06"/
128.5 mm

12, 24 & 36VDC
120VAC (Pipe Mount)

(Surface Mount)

S P E C I F I C AT I O N S
Lamp Life*:
12VDC - Incandescent
24VDC - Incandescent
36VDC - Incandescent
120VAC - Incandescent
Operating Temperature:
Net Weight:
DC Versions
AC Version
Shipping Weight:
DC Versions
AC Version
Height:
DC Versions
AC Version
Diameter:
DC Versions
AC Version

Polycarbonate
Base

HOW TO ORDER
1,000 Hours
7,000 Hours
500 Hours
7,000 Hours
-31°F to 150°F

1,000 Hours
7,000 Hours
500 Hours
7,000 Hours
-35°C to 66°C

0.8 lbs.
1.0 lb.

0.4 kg
0.5 kg

1.1 lbs.
1.3 lbs.

0.5 kg
0.6 kg

5.06"
5.25"

128.5 mm
133.4 mm

5.5"
5.5"

139.7 mm
139.7 mm

• Specify model, voltage and color
• Specify options (120VAC only):
Corner Bracket (LCMB2)
Wall Bracket (LWMB2)
• Please refer to Model Number Index
141 beginning on page 374

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Incandescent Lamp (12VDC)
Incandescent Lamp (24VDC)

Part Number
K8263073A
K8263073A-01
K8263073A-03
K8263073A-04
K8263073A-02
K8107212A
K8107213A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Incandescent Lamp (36VDC)
Incandescent Lamp (120VAC)
Flasher (12VDC)
Flasher (24VDC & 36VDC)
Flasher (120VAC)
Pipe Mount Kit

Fax: 708.534.4852

K8263078A
K8107181A
K8263A083A
K8285237A
K8285238A-01
K8263093A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:19 AM

Page 72

FEDERAL SIGNAL CORPORATION

Electraflash ®
Strobe Warning Light
Model 141ST

DESIGNED FOR INDUSTRIAL
OR VEHICULAR USE
•

Available in 12VDC, 24VDC,
120VAC and 240VAC

•

Four dome colors

•

4,000 hour strobe tube

•

Surface mount or integrated
1
/2 - inch pipe mount

•

Indoor use only

•

Type 3R enclosure

•

UL Listed and CSA Certified

Federal Signal’s Electraflash® 141ST is an economical strobe light
designed for a variety of industrial uses. This compact warning
light is less than six inches tall and six inches in diameter. Models
are available in four fresnel dome colors, including amber, blue,
green and red. All models are UL Listed for indoor/outdoor use
and the 120VAC models are CSA Certified.
The Model 141ST is available in 12VDC, 24VDC, 120VAC and
240VAC and includes a removable strobe mechanism. The 12VDC
and 24VDC units have three holes for flat surface mounting. The
120VAC and 240VAC versions come ready to mount on a 1/2-inch
pipe. Optional wall mounting brackets (Model LWMB2) or corner
mounting brackets (Model LCMB2) are available for the 120VAC
and 240VAC units.
Federal Signal’s Electraflash strobe lights are designed for both
indoor and outdoor industrial environments. The unit’s convenient
size and intense light output make it ideal for use on maintenance
vehicles, fork lifts, and other material handling equipment. The
economical Model 141ST effectively alerts of hazardous conditions
or dangerous areas.
Federal Signal’s Electraflash strobe warning light is an affordable
visual signal which is ideally suited for light duty applications.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1

Mount

141ST

12VDC

0.18 amps

80

100,000

Surface

141ST

24VDC

0.08 amps

80

100,000

Surface

141ST

120VAC 50/60HZ

0.06 amps

80

100,000

1

/2" Pipe

141ST

240VAC 50/60HZ

0.03 amps

80

100,000

1

/2" Pipe

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:09 AM

Page 73

ELECTRAFLASH ® STROBE LIGHT (141ST)

5.5"/139.7 mm

5.5"/139.7 mm
Fresnel Dome

High
Intensity
Strobe

5.06"/128.5
mm

5.25"/133.4 mm

Base

12VDC/24VDC

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
DC Models
AC Models
Shipping Weight:
DC Models
AC Models
Height:
DC Models
AC Models
Diameter:
DC Models
AC Models

120VAC/
240VAC

1

/2" Pipe Mount

HOW TO ORDER
4,000 hours
Strobe
-31°F to 150°F

4,000 hours
Strobe
-35°C to 66°C

0.8 lbs.
0.9 lbs.

0.4 kg
0.4 kg

1.3 lbs.
1.4 lbs.

0.5 kg
0.5 kg

5.06"
5.25"

128.5 mm
133.4 mm

5.5"
5.5"

139.7 mm
139.7 mm

• Specify model, voltage and color
• Specify options (120VAC and
240VAC only):
Corner Bracket (LCMB2)
Wall Bracket (LWMB2)
• Please refer to Model Number Index
141ST beginning on page 375

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Green
Dome, Red
PC Assembly, 12VDC

Part Number
K8263079A
K8263079A-01
K8263079A-03
K8263079A-02
K2001201B

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 24VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Strobe Tube
Pipe Mount Kit

Fax: 708.534.4852

K2001201B-01
K2001195D
K2001195D-01
K149128A
K8263093A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:03 AM

Page 80

FEDERAL SIGNAL CORPORATION

Hazardous Location
Warning Light
Model 151XST

RUGGED DESIGN FOR USE IN
HAZARDOUS LOCATIONS
•

Available in 12-24VDC, 120VAC
and 240VAC

•

Six dome colors

•

10,000-hour high-intensity strobe

•

3

•

Dome guard included

•

Indoor use only

•

Type 4X, IP66 enclosure

•

Marine Rated

•

UL and cUL Listed and
CSA Certified

/4 - inch pipe mount

5 yyr
WA

RRANT

Federal Signal’s Model 151XST hazardous location strobe light
provides 80 high-intensity flashes per minute. This warning light
is available in 12-24VDC, 120VAC and 240VAC, 50/60Hz.
The Model 151XST strobe light is UL Listed and CSA Certified for
Class I, Division 2, Groups A, B, C and D; Class II, Division 1,
Groups E, F and G; and Class III.
The 151XST meets Type 4X water-tight, dust-tight, and corrosionresistant requirements; constructed to IP66. This hazardous location
warning light has an aluminum base, coated for corrosion-resistance
that is ready for mounting on a 3/4-inch pipe. The Dome Guard
(included) fits over the glass dome to protect it against accidental
collision with moving equipment, such as forklifts.
The 151XST has an effective candela (ECP) of 165 and a 520,000
peak candela. It is available in six dome colors, including amber,
blue, clear, green and red (magenta upon request).
Federal Signal’s rugged 151XST strobe warning light is specifically
designed for hazardous locations or corrosive environments
where a very bright visual signal is required. This warning light
can be used for plant evacuation or other communication needs.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1
ECP2

151XST

12-24VDC

1.3-0.60 amps

80

520,000

165

3

151XST

120VAC 50/60Hz

0.35 amps

80

520,000

165

3

151XST

240VAC 50/60Hz

0.18 amps

80

520,000

165

3

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

Mount
/4" Pipe
/4" Pipe
/4" Pipe

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:17 AM

Page 81

HAZARDOUS LOCATION STROBE LIGHT (151XST)

5.5"/139.7 mm
Dome Guard
(Included)
Glass Dome
Strobe Tube

9.25"/
234.95 mm

Gasket

3/4" Pipe Mount

Aluminum Base

Power Wires

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
10,000 Hours
Strobe
-31°F to 150°F
3.8 lbs.
4.5 lbs.
9.25"
5.5"

10,000 Hours
Strobe
-35°C to 66°C
1.7 kg
2.0 kg
234.95 mm
139.7 mm

• Specify model, voltage and color
• Please refer to Model Number Index
151XST beginning on page 376

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Series C Dome and Ring Assembly*
Dome & Ring Assembly, Amber
Dome & Ring Assembly, Blue
Dome & Ring Assembly, Clear
Dome & Ring Assembly, Green
Dome & Ring Assembly, Red
Dome & Ring Assembly, Magenta

Part Number
K8449078C-01
K8449078C-02
K8449078C-04
K8449078C-03
K8449078C
K8449078C-05

Description

Part Number

PC Assembly, 12-24VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Strobe Tube
Dome Gaskets
Guard

K2001173A
K2001071B
K2001071B-01
K149122B
K8449080B
K8449090B

* Call the factory for Series A and B part numbers.

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:09 AM

Page 56

FEDERAL SIGNAL CORPORATION

Hazardous Location
Steady-Burning Light
Model 191X

Federal Signal's Model 191X hazardous location steady burning
light is rated for operation with any voltage from 24 - 250 VAC or
VDC. The user determines the voltage based on the lamp used.
The fixture will accommodate lamps up to a 100 watt/A-19
(user supplied).

DESIGNED FOR USE IN
HAZARDOUS LOCATIONS

The Model 191X is UL Listed and CSA Certified for Class I,
Division 2, Groups A, B, C and D; Class II, Division 1 and 2,
Groups E and F.

•

24-250 VAC/VDC

•

Six tempered glass dome colors

•

Uses standard A-19 incandescent
lamp (40W-100W)

•

3

•

Dome Guard included

•

Indoor use only

•

Type 4X, IP66 enclosure

•

UL and cUL Listed and
CSA Certified

/4 - inch pipe mount

The 191X has been certified by UL and CSA as meeting Type 4X
water-tight and corrosion-resistant requirements; constructed to
meet IP66. This hazardous location steady burning light has an
aluminum base ready for mounting on a 3/4-inch pipe. The base
features electrostatically applied (e-coated) epoxy paint for
corrosion-resistance. A dome guard fits over the glass dome to
protect it against accidental collision with moving equipment,
such as forklifts.
To determine the proper lamp wattage and wire insulation rating
for a specific application, refer to the Operating Temperature Chart
below. Model 191X is available in six dome colors – amber, blue,
clear, green, red and magenta.
Federal Signal's Model 191X steady burning light is designed for
hazardous locations where a visual signal is needed. This fixture
can be used for status indication or area lighting on offshore oil
rigs, in mines, and in refineries.

OPERATING TEMPERATURE CODES

5 yyr
WA

RRANT

Hazardous
Environment

Max. Temperature*/
UL Temp. Code

Dome
Color

Lamp
Wattage

Supply Wire
Insulation Rating

Class I, Division 2

350°C/T1
325°C/T1
260°C/T2B
215°C/T2D

Blue
Red, Green, Amber
Clear
All

100 (A-19)
100 (A-19)
100(A-19)
40(A-19)

125°C
125°C
125°C
85°C

Class II, Division 1
Class II, Division 2

200°C/T3
200°C/T3

All
All

40(A-19)
40(A-19)

85°C
85°C

* at 40°C ambient

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/7/08

3:18 PM

Page 57

HAZARDOUS LOCATION LIGHT (191X)

5.5"/139.7 mm
Glass Dome

Dome Guard
(Included)
Lamp
(user supplied)
9.25"/235 mm

Gasket
Aluminum Base

3/4" Pipe
Mount

S P E C I F I C AT I O N S
Lamp Style:
Operating Voltage:
Mount:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
Incandescent A-19s (40W-100W)
24-250VAC/VDC
24-250VAC/VDC
3
3
/4" Pipe
/4" Pipe
3.3 lbs.
1.5 kg
4.2 lbs.
1.9 kg
9.25"
235 mm
5.5"
139.7 mm

• Specify model, voltage and color
• Please refer to Model Number Index
191X beginning on page 374

R E P L A C E M E N T PA RT S
Description
Series C Dome and Ring Assembly*
Glass Dome & Ring Assembly, Amber
Glass Dome & Ring Assembly, Blue
Glass Dome & Ring Assembly, Clear
Glass Dome & Ring Assembly, Green

Part Number
K8449078C-01
K8449078C-02
K8449078C-04
K8449078C-03

Description

Part Number

Glass Dome & Ring Assembly, Magenta K8449078C-05
Glass Dome & Ring Assembly, Red
K8449078C
Gasket
K8449080B
Guard
K8449090B

* Call the factory for Series A part numbers.

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:39 AM

Page 58

FEDERAL SIGNAL CORPORATION

Flashing LED
Hazardous Location
Warning Light
with XLT™
Model 191XL

RUGGED DESIGN FOR USE IN
HAZARDOUS LOCATIONS
•

XLTTM Technology

•

Available in 24VAC/DC, 120VAC
and 240VAC

•

Four lamp/lens colors

•

Flashing mode standard,
configurable to Steady-burn

•

60,000 hour, vibration resistant
LED lamp

•

3

•

Dome guard included

•

Type 4X, IP66 enclosure,
Marine Listed

•

UL and cUL Listed

/4 - inch pipe mount

The model 191XL is a hazardous location flashing signal light that
features the super bright LED array with XLTTM, eXtreme Light
Technology. The unit is available in 24VAC/DC, 120VAC or 240VAC
and four colors – amber, blue, green and red. The 191XL comes
standard in flashing mode and is field configurable to steady burn
mode for maximum functionality.
The Model 191XL has been certified by UL as meeting Type 4X
watertight and corrosion-resistant requirements, and IP66 rated.
This hazardous location warning light has an aluminum base ready
for mounting on a 3/4 inch pipe. The base features electrostatically
applied (e-coated) epoxy paint for corrosion-resistance. A dome
guard fits over the glass dome to protect it against accidental
collision with moving equipment, such as a forklift. The outer
glass dome and LED pairing are available in four colors – amber,
blue green and red.
Federal Signal’s super bright LED array used in the 191XL with XLT
inside produces intense light output and 60,000 hours of service.
Increased shock and vibration resistance add to this unit’s rugged
industrial portfolio of features.
The 191XL is UL Listed for Class I, Division 2, Groups A, B, C
and D; Class II Division 1, Groups E, F and G; and Class III.

Model

Voltage

Operating
Current

In-rush
Current

Flash
Rate/Minute Mount

191XL

24VAC/DC

0.38 amps

1.75 amps, 5.0 mS

60

3

191XL

120VAC

0.21 amps

2.0 amps, 0.25 mS

60

3

191XL

240VAC

0.13 amps

2.0 amps, 0.25 mS

60

3

/4" Pipe
/4" Pipe
/4" Pipe

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:41 AM

Page 59

HAZARDOUS LOCATION LED WARNING LIGHT (191XL)

5.5"/140 mm

Glass Dome

LED Array

9.25"/235 mm

Gasket

Aluminum Base

3/4" Pipe
Mount

S P E C I F I C AT I O N S
Operating Temperature:
Net Weight:
Shipping Weight:
Height (with Dome Guard):
Diameter:

HOW TO ORDER
-58°F to 150°F
4.0 lbs.
4.25 lbs.
9.25"
5.5"

-50°C to 66°C
1.82 kg
1.93 kg
235.0 mm
140.0 mm

• Specify model, voltage and color
• Please refer to Model Number Index
191XL beginning on page 374

R E P L A C E M E N T PA RT S
Description

Part Number

PC Board Assembly, 24VDC
PC Board Assembly, 120/240VAC
LED array, Amber
LED array, Blue
LED array, Green
LED array, Red

K2005455A
K2005416A
K147169A-06
K147169A-07
K147169A-08
K147169A-09

Dome and Ring Assembly*
Glass Dome/Ring Assembly, Amber
Glass Dome/Ring Assembly, Blue
Glass Dome/Ring Assembly, Green
Glass Dome/Ring Assembly, Red
Gasket

K8449078C-01
K8449078C-02
K8449078C-03
K8449078C
K8449080B

* Call the factory for Series A part numbers.

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/1/08

2:52 PM

Page 120

FEDERAL SIGNAL CORPORATION

Explosion-Proof
LED Warning Light
2000 Series Model LED

DESIGNED FOR USE IN ATEX
ZONE RATED ATMOSPHERES
•

Super bright output
with XLTTM Technology

•

3 remotely selectable
flash patterns

•

50,000 hour lamp life

•

Available in five colors

•

Ex ‘e’ terminal chamber available

•

AC and DC voltage ranges

•

Approved for use in Zone
1, 2, 21, 22 Atmospheres

The 2000 Series model LED beacon, with XLTTM technology, is a
visual signal warning light for use in hazardous locations requiring
ATEX approval. The beacon can produce three light patterns
depending on the configuration of a field selectable jumper wire
or remote contact closure. The light patterns are: steady-on, slow
flash and rapid flash. An optional telephone initiation feature
also allows the beacon to flash when telephone ringing voltage
is present.
The 2000 Series LED beacon is sealed from dust and water by a
nitrile rubber o-ring seal. All exterior cast aluminum surfaces
are finished in powder coat paint and external hardware is
manufactured from stainless steel to resist corrosion. Available
signal colors are amber, blue, green, red and yellow.
The 2000 Series LED beacon is externally powered by 24VDC or
110-240VAC source. All AC powered units feature a switch mode
power supply that accommodates a wide input voltage range
without requiring any additional configuration from the user. The
current consumption from the beacon is less than 500mA and the
in-rush current is low enough to allow PLC initiation without the
use of an external relay. Screw type terminal blocks are provided
for field wiring on all units.
All variations of the 2000 Series LED beacon feature a four entry
fixture to allow cable looping. These cable entries are metric
M20 X 1.5, but other configurations are available upon request.

ATEX
Model

Voltage

Operating
Current

Flash Rate/
Minute

Max In-Rush
Current

LED

24VDC

0.50 amps

60-80

1.75A for 5.00mS

LED

110VAC

0.22 amps

60-80

2.00A for 0.25mS

LED

240VAC

0.13 amps

60-80

2.00A for 0.25mS

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:52 AM

Page 121

EXPLOSION-PROOF WARNING LIGHT (2000 SERIES LED)
0.51”/
13 mm
9.84”/
250 mm
8.86”/
225 mm

10.04”/
255 mm

8.23”/209 mm
11.3”/287 mm

S P E C I F I C AT I O N S
Lamp Style:
LED
Operating Temperature:
Ex d and Ex de:
-40°F to 131°F
-40°C to 55°C
Net Weight:
Ex d:
13.23 lbs.
6.0 kg
Ex de:
15.43 lbs.
7.0 kg
Shipping Weight:
16.5 lbs.
7.5 kg
Height:
9.84"
250.0 cm
Width:
10.04"
255.0 cm
Length:
8.23"
209.0 cm
ATEX Certificate Number: Baseefa 07ATEX0150
IECEx Certificate Number: IECEx BAS 07.0038
Certification Marking:
Ex d IIB T6 Ex tD A21 Ex de IIB T6 Ex tD A21
LIGHT OUTPUT
Amber
113cd
Blue
12cd
Green
66cd
Yellow
60cd
Red
63cd

LED

TYPE
LED Lamp - LED

D4

U

N

Terminals:
Ex d:
4 way block mounted PCB
Ex de:
12 way block in terminal chamber
Cable entries:
Ex d:
4 entries - M20 x 1.5
Ex de:
4 entries - M20 x 1.5
Mounting:
Via fixed cast lugs at two
mounting points
Body: Marine Grade Alloy painted Regal Red
Exterior dome:
Toughened glass
Guard:
316 Stainless steel
Ingress Protection:
IP66

A

VOLTAGE (-20%/+10%)
U - 110-240VAC
(50/60 Hz)(2)
B - 24VDC

PROTECTION
Exde - DE
Exd 4 Entry - D4

FACILITIES
N - None
T - Telephone Link(1)

COLOR
Amber Blue Green Red Yellow -

A
B
G
R
Y

NOTES:
(1) Applicable to Xenon AND LED beacons only
(2) LED beacon available in 24VDC and 110-240VAC only

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:46 AM

Page 116

FEDERAL SIGNAL CORPORATION

Explosion-Proof
Static Warning Lights
2000 Series Models FL18 and FL36

DESIGNED FOR USE IN ATEX
ZONE RATED ATMOSPHERES
•

Twin Flourescent lamps for security

•

Individual lamp control gear

•

8,000 hour lamp life

•

Available in five colors
and clear

•

Ex ‘e’ terminal chamber available

•

AC and DC voltage ranges

•

Approved for use in Zone
1, 2, 21, 22 Atmospheres

The 2000 Series model FL18 and FL36 static warning beacons are
visual signals designed for use in hazardous locations that require
ATEX approval. At the heart of its design is a compact fluorescent
lamp configuration that provides long life, excellent vibration
resistance and a signal-specific colored glow.
FL18 and FL36 beacons are sealed from dust and water by a
nitrile rubber o-ring seal. All exterior cast aluminum surfaces
are finished in powder coat paint and external hardware is
manufactured from stainless steel to resist corrosion. Available
signal colors are amber, blue, clear, green, red, and yellow.
The FL18 and FL36 beacons are externally powered by an AC or
DC source. Screw type terminal blocks are provided for field
wiring on all units.
All variations of the FL18 and FL36 beacons feature a four entry
fixture to allow cable looping. These cable entries are metric M20
X 1.5, but other configurations are available upon request.

ATEX
Model

Voltage

Operating
Current

Equivalent
Wattage

FL18

240VAC

0.18 amps

17.5W

FL18

110VAC

0.27 amps

16.0W

FL18

110VDC

0.14 amps

14.5W

FL18

48VDC

0.42 amps

19.2W

FL18

24VDC

0.87 amps

20.9W

FL36

240VAC

0.18 amps

40.2W

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/1/08

2:45 PM

Page 117

EXPLOSION-PROOF STATIC WARNING LIGHTS (2000 SERIES FL18/FL36)
0.51”/
13 mm
9.84”/
250 mm
8.86”/
225 mm

10.04”/
255 mm

8.23”/209 mm
11.3”/287 mm

S P E C I F I C AT I O N S
Lamp Style:
Operating Temperature:
Ex d and Ex de:
Net Weight:
Ex d:
Ex de:
Shipping Weight:
Height:
Width:
Length:
ATEX Certificate Number:
IECEx Certificate Number:
Certification Marking:

Flourescent
-40°F to 158°F

-40°C to 70°C(T4)

13.23 lbs.
15.43 lbs.
16.5 lbs.
9.84"
10.04"
8.23"
Baseefa 07ATEX0150
IECEx BAS 07.0038
Ex d IIB T4 Ex tD A21

6.0 kg
7.0 kg
7.5 kg
250.0 mm
255.0 mm
209.0 mm

Terminals:
Ex d:
4 way block mounted PCB
Ex de:
12 way block in terminal chamber
Cable entries:
Ex d:
4 entries - M20 x 1.5
Ex de:
4 entries - M20 x 1.5
Mounting:
Via fixed cast lugs at two
mounting points
Body: Marine Grade Alloy painted Regal Red
Exterior dome:
Toughened glass
Guard:
316 Stainless steel
Ingress Protection:
IP66

Ex de IIB T4 Ex tD A21

HOW TO ORDER
•
•

Flourescent Lamps Sold Separately
Two Required for FL18,
Four Required for FL36

FL Tube, Red

P/N A2158R

FL Tube,Yellow

P/N A2158Y

FL Tube,Blue

P/N A2158B

FL Tube,Green

P/N A2158G

FL Tube,Clear

P/N A2158

FL Tube,Amber

P/N A2158A

FL18

D2

M

N

VOLTAGE (±10%)
M - 240VAC
B - 024VDC(2)(6)
L - 110VAC
C - 048VDC
D - 110VDC(3)

TYPE
Fluorescent, 18W(4) - FL18
Fluorescent, 36W(1,4) - FL36
PROTECTION
Exde - DE
Exd 4 Entry - D4

O

FACILITIES
N - None
T - Telephone
Link(5)
SPECIAL
FEATURES
For special
features
and future
variations

NOTES:
(1) Only the 240VAC voltage is available with FL36 beacon
(2) Range 22VDC to 32VDC with FL18 beacon
(3) Range 100VDC to 135VDC with xenon beacons (inclusive of ±10%).
FL18 is 100VDC to 150VDC inclusive of ±10%.

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

(4) 2 pcs. required for FL18, 4 pcs. required for FL36
(5) Applicable to Xenon AND LED beacons only
(6) LED beacon available in 24VDC and 110-240VAC only

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/1/08

2:50 PM

Page 118

FEDERAL SIGNAL CORPORATION

Explosion-Proof
Strobe Lights
2000 Series Models XEN1 and XEN4

DESIGNED FOR USE IN ATEX
ZONE RATED ATMOSPHERES
•

Single and four tube models

•

Internal fresnel lens

•

Available in five colors
and clear

•

Ex ‘e’ terminal chamber available

•

AC and DC voltage ranges

•

Approved for use in Zone
1, 2, 21, 22 Atmospheres

ATEX

5
WA

yyr

RRANT

Y

The 2000 Series Models XEN1 and XEN4 Xenon beacons are
visual warning lights for use in hazardous locations that require
ATEX approval. Model XEN1 is a strobe light that contains a single
xenon flashing tube. This makes it ideally suited for use in indoor
explosion-proof areas that require compliance to European electrical
safety directives.
Model XEN4 is a strobe light that utilizes four strobe tubes, timed
in a sequential manner, to simulate the operation of a mechanical
rotating beacon. This four-strobe version is ideal in outdoor
situations where a conventional beacon may not be adequate.
The 2000 Series Xenon beacon is sealed from dust and water
by a nitrile rubber o-ring seal. All exterior cast aluminum surfaces
are finished in powder coat paint and external hardware is
manufactured from stainless steel to resist corrosion. Available
signal colors are amber, blue, clear green, red, and yellow. An
optional telephone initiation feature is also available for either
beacon that allows the product to flash when telephone ringing
voltage is present.
The 2000 Series Xenon beacon is externally powered by a DC or
AC power source. Screw type terminal blocks are provided for
field wiring on all units.
All variations of the 2000 Series Xenon beacon feature a four
entry fixture to allow cable looping. These cable entries are metric
M20 X 1.5, but other configurations are available upon request.

Model

Voltage

Operating
Current

Flash Rate/
Minute

XEN1

24VDC

0.93 amps

80

XEN1

48VDC

0.81 amps

80

XEN1

110VDC

0.61 amps

80

XEN1

110VAC

0.48 amps

80

XEN1

240VAC

0.38 amps

80

XEN4

24VDC

1.90 amps

N/A

XEN4

48VDC

1.22 amps

N/A

XEN4

110VDC

0.92 amps

N/A

XEN4

110VAC

0.53 amps

N/A

XEN4

240VAC

0.41 amps

N/A

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:50 AM

Page 119

EXPLOSION-PROOF STROBE LIGHTS (2000 SERIES XEN1/XEN4)
0.51”/
13 mm
9.84”/
250 mm
8.86”/
225 mm

10.04”/
255 mm

8.23”/209 mm
11.3”/287 mm

S P E C I F I C AT I O N S
Lamp Style:
Xenon
Operating Temperature:
Ex d and Ex de:
-40°F to 131°F
-40°C to 70°C
Net Weight:
Ex d:
13.23 lbs.
6.0 kg
Ex de:
15.43 lbs.
7.0 kg
Shipping Weight:
16.5 lbs.
7.5 kg
Height:
9.84"
250.0 cm
Width:
10.04"
255.0 cm
Length:
8.23"
209.0 cm
ATEX Certificate Number: Baseefa 07ATEX0150
IECEx Certificate Number: IECEx BAS 07.0038
Certification Marking:
Ex d IIB T4 Ex tD A21 Ex de IIB T4 Ex tD A21

Terminals:
Ex d:
4 way block mounted PCB
Ex de:
12 way block in terminal chamber
Cable entries:
Ex d:
4 entries - M20 x 1.5
Ex de:
4 entries - M20 x 1.5
Mounting:
Via fixed cast lugs at two
mounting points
Body: Marine Grade Alloy painted Regal Red
Exterior dome:
Toughened glass
Guard:
316 Stainless steel
Ingress Protection:
IP66

HOW TO ORDER
•
•

Colored Xenon Lens Ordered Separately
Part Numbers Are As Follows:

Red

A1779S

Yellow

A3410S

Blue

A1111S

Green

A1198S

Clear

A2133S

Amber

A1131S

XEN1

D4

TYPE
Xenon, Single - XEN1
Xenon, Four - XEN4
PROTECTION
Exde - DE
Exd 4 Entry - D4

M

N

O

VOLTAGE (±10%)
M - 240VAC
B - 024VDC
L - 110VAC
C - 048VDC
D - 110VDC(1)

NOTES:

FACILITIES
N - None
T - Telephone
Link(2)
SPECIAL
FEATURES
For special
features
and future
variations

(1) Range 100VDC to 135VDC with xenon beacons (inclusive of ±10%).
FL18 is 100VDC to 150VDC inclusive of ±10%.
(2) Applicable to Xenon AND LED beacons only

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:35 AM

Page 34

FEDERAL SIGNAL CORPORATION

Electraray ®
Rotating Warning
Light
Model 225

The Federal Signal Electraray® Model 225 is a compact, economical
rotating warning light designed for industrial uses. This innovative
dome design features a single retaining screw that allows quick
and easy access for inspection and relamping.

ECONOMICAL LIGHT DUTY
WARNING LIGHT
•

Available in 120VAC

•

Five dome colors

•

Integrated 1/2 - inch pipe mount

•

Indoor use only

•

Type 4X, IP66 enclosure

•

UL and cUL Listed

The Federal Signal Electraray has a closed cell neoprene gasket
that makes it water resistant. The injection molded reflector
rotates around an incandescent lamp and produces 90 flashes
per minute. It is available in five dome colors (amber, blue, clear,
green and red) and is UL Listed for Type 4X. Constructed to IP66
specifications, the Electraray 225 is ready to mount on a 1/2-inch
pipe. Optional mounting brackets are available, simplifying
installation on walls and in corners.
The Electraray 225 is one of the most economical rotating signaling
lights in the Federal Signal product line. Its design makes it easily
adaptable for a multitude of indoor and outdoor applications. It is
designed for permanent mounting where a 120VAC, 50/60Hz line
is available. This light provides an effective, economical means of
supplementing audible signaling devices.
Federal Signal’s Electraray rotating light is an inexpensive warning
light for calling attention to emergency situations or process
status changes.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

225

120VAC 50/60HZ

0.22 amps

90

1,000

1

/2" Pipe

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:03 AM

Page 35

ELECTRARAY ® (225)

5.5"/139.7 mm
Polycarbonate
Dome

Parabolic Mirror
Incandescent Lamp

7.25"/184.2 mm

Retaining
Screw

1

/2" Pipe Mount

S P E C I F I C AT I O N S
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
Incandescent
-31°F to 150°F
2.0 lbs.
2.7 lbs.
7.25"
5.5"

Incandescent
-35°C to 66°C
0.9 kg
1.2 kg
184.0 mm
140.0 mm

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)*
Wall Bracket (LWMB2)*
• Please refer to Model Number Index
225 beginning on page 373
* Mounting brackets not rated for Type 4X

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Lamp
Motor, 120VAC

Part Number
K8444D219C-03
K8444D219C-01
K8444D219C-04
K8444D219C-02
K8444D219C
K149123A
K8241A030-02

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:10 AM

Page 36

FEDERAL SIGNAL CORPORATION

Electraray ®
Hazardous Location
Rotating Warning
Light
Model 225X

DESIGNED FOR USE IN
HAZARDOUS LOCATIONS
•

Available in 120VAC and 240VAC

•

Five dome colors

•

25-watt incandescent lamp

•

1

•

Indoor use only

•

Type 4X, IP66 enclosure

•

UL and cUL Listed and
CSA Certified

/2 - inch pipe mount

The new Federal Signal Electraray® Model 225X is a compact,
economical rotating warning light designed for a variety industrial
applications. This innovative dome design, with a single screw
allows quick and easy access for inspection and relamping.
The Federal Signal Electraray 225X features a silicone rubber
gasket that provides a water-resistant seal between the dome and
the black poly-coated base. The injection molded reflector rotates
around a 25-watt lamp producing 90 flashes per minute. It is
available in five dome colors (amber, blue, clear, green and red)
and is UL listed for Class I, Division 2, Group A, B, C and D; Class
II, Division 2, Groups F and G; and Class III. The Electraray 225X
is ready to mount on a 1/2" pipe.
The Electraray 225X design makes it a good choice for a multitude
of indoor and outdoor applications. It is designed for permanent
mounting where 120VAC, 50/60Hz is available. This particular
light provides an effective means of supplementing audible signaling
devices in hazardous environments.
Federal Signal’s affordable Electraray rotating warning light is
specifically designed for use in hazardous locations or where
corrosive materials are present.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

225X

120VAC 50/60Hz

0.220 amps

90

1,000

1

225X

240VAC 50/60Hz

0.120 amps

90

1,000

1

/2" Pipe
/2" Pipe

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:11 AM

Page 37

ELECTRARAY ® HAZARDOUS LOCATION WARNING LIGHT (225X)

5.5"/139.7 mm

Polycarbonate
Dome

25 Watt
Incandescent
Lamp

Parabolic
Mirror
7.5"/
190.5 mm

1/2" Pipe Mount

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
200 Hours
Incandescent
-40°F to 104°F
2.0 lbs.
2.7 lbs.
7.5"
5.5"

200 Hours
Incandescent
-40°C to 40°C
0.9 kg
1.2 kg
190.5 mm
139.7 mm

• Specify model, voltage and color
• Please refer to Model Number Index
225X beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Lamp, 120VAC
Lamp, 240VAC
Motor, 120VAC

Part Number
K8444D219C-03
K8444D219C-01
K8444D219C-04
K8444D219C-02
K8444D219C
K149123A
K8107A149A
K8241A030-02

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:31 AM

Page 50

FEDERAL SIGNAL CORPORATION

Electraray ®
Hazardous Location
LED Flashing Warning
Light with XLT™
Model 225XL

LED-BASED WARNING LIGHT
FOR HEAVY-DUTY
INDUSTRIAL APPLICATIONS
•

XLTTM Technology

•

Available in 24VAC/DC, 120VAC
and 240VAC

•

Four lens/lamp colors

•

Flashing mode standard,
configurable to Steady-burn

•

60,000-hour, vibration-resistant
LED lamp

The Model 225XL has been certified by UL as meeting Type 4X
watertight and corrosion-resistant requirements, and is rated for
Division 2 applications. This hazardous location warning light has
a black polyurethane-coated base and the inner Fresnel lens is
available in four colors – amber, blue green and red. The clear
polycarbonate outer dome can be quickly removed for access
while changing the lamp or inspecting the unit.
Federal Signal’s super bright LED array used in the 225XL with
XLT inside produces intense light output and 60,000 hours of
service. Increased shock and vibration resistance add to this unit’s
rugged industrial portfolio of features.
The 225XL is UL Listed for Class I, Division 2, Groups A, B, C and
D; Class II Division 2, Groups F and G; and Class III.

/2 - inch pipe mount

•

1

•

Type 4X, IP66 enclosure,
Marine Listed

•

UL and cUL Listed for Class 1,
Division 2 applications

The Model 225XL is a hazardous location flashing signal light that
features the super bright LED array with XLTTM, eXtreme Light
Technology. The unit is available in 24VAC/DC, 120VAC or 240VAC
and four colors – amber, blue, green and red. The 225XL comes
standard in flashing mode and is field configurable to steady burn
mode for maximum functionality.

The Federal Signal Model 225XL is ideal for wet, corrosive
atmospheres like those found in food processing industries or
anywhere a vibration-resistant visual signal is needed.

Model

Voltage

Operating
Current

In-rush
Current

Flash
Rate/Minute

225XL

24VAC/DC

0.38 amps

1.75 amps, 5.0 mS

60

1

225XL

120VAC

0.21 amps

2.00 amps, 0.25 mS

60

1

225XL

240VAC

0.13 amps

2.00 amps, 0.25 mS

60

1

Mount
/2" Pipe
/2" Pipe
/2" Pipe

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:32 AM

Page 51

ELECTRARAY ® HAZARDOUS LOCATION LED LIGHT (225XL)

5.5"/139.7 mm

Outer Dome
LED Array

7.5"/190.5 mm
Inner
Fresnel Lens

1/2" Pipe
Mount

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
60,000 hours
LED-based Lamp
-58°F to 150°F
3.2 lbs.
4.0 lbs.
7.5"
5.5"

60,000 hours
LED-based Lamp
-50°C to 66°C
1.5 kg
1.8 kg
190.5 mm
139.7 mm

• Specify model, voltage and color
• Please refer to Model Number Index
225XL beginning on page 374

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Exterior Dome, Clear
Interior Lens, Blue
Interior Lens, Amber
Interior Lens, Red
Interior Lens, Green

Part Number
K8444D219C-04
K8550C095A-01
K8550C095A-02
K8550C095A-03
K8550C095A-04

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Board Assembly, 24VAC/DC
PC Board Assembly, 120/240VAC
LED Lamp, Amber
LED Lamp, Blue
LED Lamp, Green
LED Lamp, Red

K2005455A
K2005416A
K147169A-06
K147169A-07
K147169A-08
K147169A-09

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:14 AM

Page 78

FEDERAL SIGNAL CORPORATION

Electraray ®
Hazardous Location
Strobe Warning Light
Model 225XST and 225XST-I

Federal Signal’s Electraray® Model 225XST hazardous location
strobe light provides 80 high intensity flashes per minute. This
warning light is available in 12-24VDC, 24VDC, 120VAC and 240VAC.

DESIGNED FOR USE IN
HAZARDOUS LOCATIONS
•

12-24VDC, 24VDC, 120VAC
and 240VAC

•

Six lens colors

•

5,000 hour, high-intensity
strobe tube

•

1

•

Indoor use only

•

Type 4X, IP66 enclosure
(Dome up orientation)

•

UL and cUL Listed and
CSA Certified

The Model 225XST has been certified by UL as meeting Type 4X
water tight and corrosion resistant requirements; constructed to
IP66 (in dome up orientation). This hazardous location warning
light has a black polyurethane coated base and the inner fresnel
lens is available in six colors (including magenta). The clear polycarbonate outer dome can be quickly removed for easy access to
inspect the unit or change the lamp. The 225XST has an effective
candela of 240 and a 580,000 peak candela.
The 24VDC 225XST-I features a voltage in-rush limiting PCB
design that provides greater compatibility with factory automation
control systems and less electrical interference with in-rush
sensitive devices.

/2 - inch pipe mount

The 225XST is UL Listed and CSA Certified for Class I, Division 2,
Groups A, B, C and D; Class II, Division 2, Groups F and G; and
Class III.
Model 225XST is ideal for wet, corrosive atmospheres like those
found in food processing industries, or anywhere a visual signal
is needed.
Federal Signal’s affordable Electraray Strobe Warning Light is
specifically designed for use in hazardous locations or where
corrosive materials are present.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1
ECP2

225XST

12-24VDC

1.70-0.70 amps

80

580,000

240

1

225XST-I

24VDC

0.70 amps

80

580,000

240

1

225XST

120VAC

0.25 amps

80

580,000

240

1

225XST

240VAC

0.20 amps

80

580,000

240

1

Mount
/2" Pipe
/2" Pipe

(2.0 amp In-rush)

5 yyr
WA

RRANT

Y

1
2

/2" Pipe
/2" Pipe

Peak candela is the maximum light intensity generated by a flashing light during its light pulse
ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:59 AM

Page 79

ELECTRARAY ® HAZARDOUS LOCATION WARNING LIGHT (225XST/225XST-I)
5.5"/139.7 mm

Outer Dome

Strobe Tube

Inner
Fresnel Lens
7.5"/190.5 mm

Retaining
Screw

1/2" Pipe Mount

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
10,000 Hours
Strobe
-40°F to 149°F
1.5 lbs.
2.0 lbs.
7.5"
5.5"

10,000 Hours
Strobe
-40°C to 65°C
0.68 kg
0.9 kg
190.5 mm
139.7 mm

• Specify model, voltage and color
• Please refer to Model Number Index
225XST/225XST-I beginning on
page 376

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Interior Lens
Amber
Blue
Clear
Green
Magenta
Red

Part Number
K8550C095A-02
K8550C095A-01
K8550C095A
K8550C095A-04
K8550C095A-07
K8550C095A-03

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Exterior Dome, Clear
PC Assembly, 024VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Strobe Tube

Fax: 708.534.4852

K8444D219C-04
K2001202C-01
K2001905A
K2001905A-01
K8107177A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:38 AM

Page 38

FEDERAL SIGNAL CORPORATION

Pioneer™
Rotating Beacon Ray
Model 27S

Federal Signal’s Model 27S is a medium sized, highly effective
warning light designed for upright mounting and AC operation.

MEDIUM DUTY WARNING
LIGHT
•

Available in 120VAC

•

Six lens colors

•

2,000 hour sealed beam lamp

•

Integrated /2 - inch pipe mount

•

Type 3R enclosure

•

UL and cUL Listed and
CSA Certified

The 27S streamlined design features a sturdy housing finished in
gray enamel. The Pioneer™ is available in six lens colors (amber,
blue, clear, green, magenta and red), and is UL Listed and
CSA Certified.
The Model 27S is ready to mount on a 1/2-inch pipe. In addition,
optional mounting brackets simplify installation on walls or
in corners.

1

A high intensity 65-watt sealed beam lamp projects a fixed beam
downward onto a 360° rotating reflector set at a 45° angle,
producing the 60 flashes per minute in all directions.
Model 27S is a versatile warning or signaling light useful in a
variety of in-plant applications. It has been designed for permanent
installation where a 120VAC, 50/60Hz line voltage is available.
This light is particularly useful as a signaling or warning device in
high ambient noise areas where it can be used to supplement or
supplant audible signaling devices.
The 27S is effective for alerting of hazardous conditions or
identifying dangerous areas.
Federal Signal’s Pioneer Rotating Beacon Ray is a dependable
mid-range warning light which meets or exceeds the durability
and light output requirements of most manufacturing environments.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

27S

120VAC 50/60HZ

0.64 amps

60

6,000

1

/2" Pipe

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:16 AM

Page 39

PIONEER™ BEACON RAY (27S)
6.25"/
158.8 mm
Suspension
Clip

Aluminum
Housing

Sealed
Beam Lamp

14.13"/
358.9 mm
Polished Aluminum
45° Angle Reflector

Lens

Motor

1

/2" Pipe Mount

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
2,000 Hours
65-watt Sealed Beam
32°F to 120°F
3.1 lbs.
4.0 lbs.
14.13"
6.25"

2,000 Hours
65-watt Sealed Beam
0°C to 49°C
1.4 kg
1.8 kg
358.9 mm
158.9 mm

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)
Wall Bracket (LWMB2)
• Please refer to Model Number Index
27S beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green

Part Number
K8241B031K-16
K8241B031K-14
K8241B031K-13
K8241B031K-11

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Dome, Magenta
Dome, Red
Sealed Beam Lamp, 120V
Motor, 120VAC

Fax: 708.534.4852

K8241B031K-15
K8241B031K-12
K8241A014B
K8241A030-03

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:42 AM

Page 60

FEDERAL SIGNAL CORPORATION

Explosion-Proof
LED Warning Light
with XLT™
Model 27XL
Federal Signal’s Model 27XL explosion-proof LED light with XLTTM
produces 60 high-intensity flashes per minute. This warning light
operates on 24VDC, 120VAC, and 240VAC 50/60Hz and is UL
Listed for Class I, Division 1, Groups C & D; Class II, Division 1,
Groups E, F & G; Class I, Division 2, Groups A, B; and Class III.
The 27XL is also Marine Rated.

DESIGNED FOR USE IN
EXPLOSION-PROOF
ATMOSPHERES
•

XLTTM Technology

•

Available in 24VDC, 120VAC
and 240VAC

eXtreme Light Technology (XLT) is a break through high-intensity
LED array designed to meet the demands of industrial customers,
producing maximum light output and superior lens fill.
Configurable to either steady burning state or flashing mode XLT
provides improved performance over standard LED’s and
increased versatility while maintaining low power consumption
and vibration resistances expected from LED signals.
The 27XL features a standard low in-rush circuitry design that
provides greater compatibility with factory automation control
systems and less electrical interference with in-rush sensitive devices.

•

Available in flashing or
steady-burn mode

•

Four lens colors

•

60,000 hour LED

•

/4 - inch pendant mount standard;
other options available

•

Dome guard optional

•

UL and cUL Listed

•

Type 4X, IP66 enclosure

•

Marine Listed

The 27XL is Type 4X rated; constructed to IP66. Corrosion
resistance is achieved with a powder epoxy finish applied over
the copper-free aluminum housing. All exposed hardware is 316
grade stainless steel.

3

5
WA

yyr

RRANT

Y

Federal Signal’s Model 27XL has an effective candela (ECP) of up
to 134. A pendant mount is supplied and a ceiling mount and 90°
wall mount are available options. For easy installation, the mounting
box is first installed and the fixture is then threaded onto the
mounting box, making the electrical connection. Electrical continuity
is made when five threads are engaged.
Federal Signal’s Model 27XL is specifically designed for explosionproof atmospheres and/or corrosive environments. Because it is
easy to install and requires very low maintenance, it is ideal for
use in areas such as oil rigs, mines, refineries, and chemical plants.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1
ECP2

27XL

24VDC

380mA

60

211

134

3

27XL

120VAC

210mA

60

211

134

3

27XL

240VAC

130mA

60

211

134

3

Mount
/4" Pendant
/4" Pendant
/4" Pendant

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse through amber lens

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily through amber lens

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:43 AM

Page 61

EXPLOSION-PROOF LED LIGHT (27XL)

4.5"/
114.3 mm
3/4” Pendant

4"/101.6 mm

Electrical
Connection Block

Cast Aluminum
Corrosion Resistant
Explosion-Proof Housing
15.63"/397 mm

High Intensity
LED Array
Fresnel Lens

Glass Dome
6.36"/162 mm
8.82"/224 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Ambient Temp. Range:
Net Weight:
Shipping Weight:
Height:
Diameter:

60,000 hours
LED
-55˚C to 70˚C
-25˚ to 65˚C
14.1 lbs.
18.4 lbs.
15.63"
8.82"

60,000 hours
LED
Canada
USA
6.45 kg
8.35 kg
397.0 mm
224.0 mm

HOW TO ORDER
• Specify model, voltage and color
• Specify options:
Dome Guard (DGXC)
Ceiling Mount (CMXC)
Wall Mount (WMXC)
• Please refer to Model Number
Index 27XL beginning
on page 374

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Exterior Dome Assembly, Clear
Interior Lens Assembly, Amber
Interior Lens Assembly, Blue
Interior Lens Assembly, Green
Interior Lens Assembly, Red

Part Number
K8444C271A-01
K8550C095A-02
K8550C095A-01
K8550C095A-04
K8550C095A-03

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC board assembly, 24VDC
PC board assembly, 120/240VAC
LED array, Amber
LED array, Blue
LED array, Green
LED array, Red

K2005455A
K2005416A
K147169A
K147169A-01
K147169A-02
K147169A-03

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:25 AM

Page 90

FEDERAL SIGNAL CORPORATION

Explosion-Proof
Strobe Light
Model 27XST

DESIGNED FOR USE IN
EXPLOSION-PROOF
ATMOSPHERES
•

Available in 24VDC, 120VAC
and 240VAC

•

Six lens colors

•

10,000 hour strobe tube

•

/4 - inch pendant mount standard;
other options available

•

Dome guard optional

•

Type 4X, IP66 enclosure

•

Marine Rated

•

UL and cUL Listed, CSA Certified
and CSFM Approved

3

Federal Signal’s Model 27XST explosion-proof strobe light
produces 80 high-intensity flashes per minute. This warning light
operates on 24VDC, 120VAC, and 240VAC 50/60Hz.
The 27XST is UL Listed for Class I, Division 1, Groups C & D;
Class II, Division 1, Groups E, F & G; Class I, Division 2, Groups
A, B; and Class III. The 27XST is CSA Certified and Marine Rated.
The 24VDC 27XST features a voltage in-rush limiting PCB design
that provides greater compatibility with factory automation control
systems and less electrical interference with in-rush sensitive devices.
The 27XST is Type 4X rated; constructed to IP66. Corrosion
resistance is achieved with a powder epoxy finish applied over
the copper-free aluminum housing. All exposed hardware is 316
grade stainless steel.
Federal Signal’s Model 27XST has an effective candela (ECP) of
850 and a two million peak candela. A pendant mount is supplied
and a ceiling mount and 90° wall mount are available options. For
easy installation, the mounting box is first installed and the fixture
is then threaded onto the mounting box, making the electrical
connection. Electrical continuity is made when five threads are
engaged.
Federal Signal’s Model 27XST is specifically designed for explosionproof atmospheres and/or corrosive environments. Because it is
easy to install and requires very low maintenance, it is ideal for
use in areas such as oil rigs, mines, refineries, and chemical plants.

Model

Voltage

Operating
Current

Flash Rate/
Candela
ECP2
Minute
Peak1

27XST

24VDC

1.90 amps

80

2,000,000

850

3

Mount
/4" Pendant

(3.0 amp In-rush)

5
WA

yyr

RRANT

⁄4” Pendant

27XST

120VAC 50/60Hz

0.60 amps

80

2,000,000

850

3

27XST

240VAC 50/60Hz

0.30 amps

80

2,000,000

850

3

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

⁄4” Pendant

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:30 AM

Page 91

EXPLOSION-PROOF STROBE LIGHT (27XST)
4.5"/
114.3 mm
3/4” Pendant

4"/101.6 mm

Electrical
Connection Block

Cast Aluminum
Corrosion Resistant
Explosion-Proof Housing
15.63"/397 mm

High Intensity
Strobe Tube
Fresnel Lens

Glass Dome
6.36"/162 mm
8.82"/224 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Ambient Temp. Range:
Net Weight:
Shipping Weight:
Height:
Diameter:

10,000 hours
Strobe
-50˚C to 65˚C
-25˚C to 65˚C
14 lbs.
18.1 lbs.
15.63"
8.82"

10,000 hours
Strobe
Canada
USA
6.4 kg
8.2 kg
397.0 mm
224.0 mm

HOW TO ORDER
• Specify model, voltage and color
(Magenta upon request)
• Specify options:
Dome Guard (DGXC)
Ceiling Mount (CMXC)
Wall Mount (WMXC)
• Please refer to Model Number Index
27XST beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Exterior Dome Assembly, Clear
Interior Lens Assembly, Amber
Interior Lens Assembly, Blue
Interior Lens Assembly, Clear
Interior Lens Assembly, Green
Interior Lens Assembly, Red
Interior Lens Assembly, Magenta

Part Number
K8444C271A-01
K8550C095A-02
K8550C095A-01
K8550C095A
K8550C095A-04
K8550C095A-03
K8550C095A-07

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

24VDC Mechanism
120VAC Mechanism
240VAC Mechanism
Strobe Tube, Series C1, C2
Strobe Tube, Series C1, C2
Pendant Mount

Fax: 708.534.4852

K8436107F-03
K8436107E-02
K8436107E-01
K8107159A
K8107159A
K8444A272A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:19 AM

Page 40

FEDERAL SIGNAL CORPORATION

Commander ®
Rotating Warning
Lights
Models 371 and 371L

HEAVY DUTY WARNING
LIGHTS
•

Available in 120VAC

•

Five dome colors

•

Pivoting lamp yoke

•

Surface mount and integrated
1-inch pipe mount

•

Type 4X, IP66 enclosure

•

UL and cUL Listed and
CSA Certified

Federal Signal Models 371/371L incandescent warning lights have
a powerful sealed beam lamp that rotates 360° within a glass or
polycarbonate dome. Power is delivered to the Commander’s
rotating lamp by a unique collector ring. The lamp itself is mounted
in a pivoting yoke. This allows the lamp beam angle to be adjusted
through 90 degrees from horizontal to vertical. Changing the
beam angle allows the user to create unique light patterns and/or
direct the light for better visibility.
The Model 371 features a 200-watt sealed beam lamp and a hightemperature resistant glass dome. The glass dome of the 371 is
ideal for applications such as steel mills or arc furnaces/smelters
where high ambient temperatures or red hot materials would melt
or damage the dome.
The Model 371L features a 100-watt sealed beam lamp and an
impact-resistant polycarbonate dome. The thinner polycarbonate
dome allows more light to pass through while protecting the lamp.
Both models of the Commander ® are available in five colors
(amber, blue, clear, green and red). The dome and ring assembly
simply screws on, providing access to the interior of the light.
The new 371/371L base features electrostatically applied (e-coated)
black epoxy paint for greater corrosion-resistance. Wiring can be
routed through the pipe-mount opening in the bottom of the light
or the two side knockouts can be used for side entry wiring.
Installation can be surface- or 1-inch pipe-mount. Optional wall
and corner mount brackets are available.
The 371 and 371L are Type 4X, IP66 rated, UL and cUL Listed and
CSA Certified.

Model

5 yyr
WA

RRANT

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

371

120VAC 50/60HZ

1.75 amps

60

36,000

1" Pipe/Surface

371L

120VAC 50/60HZ

0.80 amps

60

20,000

1" Pipe/Surface

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:20 AM

Page 41

COMMANDER ® ROTATING LIGHTS (371/371L)

Polycarbonate
or Glass Dome
& Ring Assembly
Twists off of base

Quick Lamp Release

Ceramic Lamp Connector

Sealed Beam Lamp

Pivotable Lamp Yoke
Cooling Fins
Side entry conduit
openings

Die-Cast
NEMA 4X
Aluminum Housing

Hubs (optional)

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style: 371
371L
Operating Temperature:
Net Weight:
371
371L
Shipping Weight:
371
371L
Height:
Diameter:

1" Plug (optional)

2,000 Hours
200W Sealed Beam
100W Sealed Beam
-31°F to 150°F

2,000 Hours
200W Sealed Beam
100W Sealed Beam
-35°C to 66°C

13.25 lbs.
9.8 lbs.

6.0 kg
4.4 kg

14.25 lbs.
10.8 lbs.
11.38"
9.12"

6.5 kg
4.9 kg
288.9 mm
231.8 mm

HOW TO ORDER
• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)*
Wall Bracket (LWMB2)*
Solid Surface Mounting Bracket
(371BRCKT)*
Shock Mount Kit (K8459A076C)
3
/4" Hub Kit (K8459138A)
1" Plug Kit (K8459130A)
• Please refer to Model Number Index
371/371L beginning on page 373
* Rated for NEMA 3R installations.

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Series B Dome and Ring Assembly*
Amber Glass (371)
Blue Glass (371)
Red Glass (371)
Clear Glass (371)
Green Glass (371)
Amber Polycarbonate (371L)
Blue Polycarbonate (371L)
Clear Polycarbonate (371L)
Green Polycarbonate (371L)
Red Polycarbonate (371L)

Part Number
K8459126A
K8459126A-01
K8459126A-02
K8459126A-03
K8459126A-04
K8459125A
K8459125A-01
K8459125A-02
K8459125A-03
K8459125A-04

Description

Part Number

Lamp (371)
Lamp (371L)
Motor Replacement Kit (371/371L)
Worm Gear Assembly (371/371L)
Brush and Spring (371/371L)
Gasket, Surface Mount

K8442A039
K8107A130
K8459A113B
K8459A017
K8442A028
K8459127A

* Call factory for Series A part numbers

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:12 AM

Page 84

FEDERAL SIGNAL CORPORATION

Commander ® Double
Strobe Hazardous
Location Warning
Light
Model 371DST

DESIGNED FOR USE IN
HAZARDOUS LOCATIONS
•

Available in 12-24VDC,
120VAC and 240VAC

•

Five dome colors

•

Surface mount and integrated
1-inch pipe mount

•

Type 4X, IP66 enclosure

•

UL and cUL Listed and
CSA Certified

5
WA

yyr

RRANT

Federal Signal Model 371DST is a double-flash strobe housed in a
Type 4X enclosure. At 80 flashes per minute and 1,000 effective
candela, the Commander® is the largest strobe signal in the
Federal Signal product line.
The 371DST features an impact resistant polycarbonate dome
available in five colors (amber, blue, clear, green, and red). The
dome and ring assembly simply screws on, allowing for quick
access to the strobe tube and printed circuit board assembly.
The new base of the Commander features electrostatically applied,
black epoxy paint for greater corrosion resistance. Wiring can be
routed through the pipe mount opening in the bottom of the light
or the side knockouts can be used for side entry wiring.
Installation can be surface- or 1-inch pipe mount. Optional wall
and corner mount brackets are available for the 371DST. The
Commander is rated Type 4X, IP66 (watertight, dust tight,
corrosion resistant).
The 371DST is also rated for Hazardous Location, Class I Division
2, Groups A,B,C, and D, Class II Division 2, Groups F & G; and
Class III. The LWMB2 wall mount bracket and the LCMB2 corner
mount bracket can be used for all non-hazardous environments.
This strobe is also UL and cUL Listed and CSA Certified.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1 ECP2

371DST

12-24 VDC

3.00-1.90 amps

80

3

750,000 1,000

1" Pipe
or Surface

371DST

120VAC 50/60Hz

0.60 amps

803

750,000 1,000

1" Pipe
or Surface

371DST

240VAC 50/60Hz

0.30 amps

803

750,000 1,000

1" Pipe
or Surface

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

3

Double flash

Mount

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:23 AM

Page 85

COMMANDER ® STROBE LIGHT (371DST)

Polycarbonate
Dome & Ring
Assembly Twists
off of base

Strobe Tube

Neoprene Gaskets
Cooling Fins
Die-Cast
NEMA 4X
Aluminum Housing

Side entry conduit
openings

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Ship. Weight:
Height:
Diameter:

HOW TO ORDER
10,000 Hours
Strobe
-31°F to 104°F
6.23 lbs.
8.3 lbs.
11.38"
9.13"

10,000 Hours
Strobe
-35°C to 40°C
2.83 kg
3.76 kg
288.9 mm
231.8 mm

* Optimal hours under ideal conditions.

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)*
Solid Surface Mounting
Bracket (371BRCKT)
Shock Mount Kit (K8459A076C)
Wall Bracket (LWMB2)*
3/4" Hub Kit (K8459138A)
1" Plug Kit (K8459130A)
• Please refer to Model Number Index
371DST beginning on page 376
* Not rated for Div. 2 applications; Type 3R.

R E P L A C E M E N T PA RT S
Description
Series B Dome and Ring Assembly*
Amber Polycarbonate
Blue Polycarbonate
Clear Polycarbonate
Green Polycarbonate
Red Polycarbonate

Part Number
K8459125A
K8459125A-01
K8459125A-02
K8459125A-03
K8459125A-04

Description

Part Number

PCB Assembly 12-24VDC
PCB Assembly 120VAC
PCB Assembly 240VAC
Gasket, Surface Mount
Strobe Tube

K2001265D-01
K200865G-02
K200865G-03
K8459127A
K8107178A

* Call the factory for Series A part numbers.

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:21 AM

Page 86

FEDERAL SIGNAL CORPORATION

Commander ®
Strobe Warning Light
Model 371ST

HEAVY DUTY STROBE LIGHT

Federal Signal Model 371ST is a single-flash strobe housed in a
Type 4X enclosure. At 60 flashes per minute and 275 effective
candela, the Commander® is the largest strobe signal in the
Federal Signal product line.
The 371ST features a heat resistant glass dome available in five
colors (amber, blue, clear, green, and red). The dome and ring
assembly simply screws on, allowing for easy access to the
strobe tube and printed circuit board assembly.

•

Available in 250VDC

•

Five dome colors

•

Surface mount and integrated
1-inch pipe mount

•

Type 4X, IP66 enclosure

The new base of the Commander features electrostatically applied,
black epoxy paint for greater corrosion resistance. Wiring can be
routed through the pipe mount opening in the bottom of the light
or the side knockouts can be used for side entry wiring.
Installation can be surface- or 1-inch pipe mount. Optional wall
and corner mount brackets are available for the 371ST. The
Commander is rated Type 4X, IP66 (watertight, dust tight,
corrosion resistant).
The LWMB2 wall mount bracket and the LCMB2 corner mount
bracket can be used to mount this strobe light.

Model

Voltage

Operating
Current

371ST

250VDC

0.25 amps

Flash Rate/
Minute

Candela
Peak1 ECP2

60

625,000 275

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

Mount
1" Pipe
or Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:25 AM

Page 87

COMMANDER ® STROBE LIGHT (371ST)

Glass
Dome & Ring
Assembly Twists
off of base

Strobe Tube

Neoprene Gaskets
Cooling Fins

Die-Cast
NEMA 4X
Aluminum Housing

Side entry conduit
openings

Hubs (user supplied)

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
10,000 Hours
Strobe
-31°F to 150°F
10.0 lbs.
12.4 lbs.
11.38"
9.13"

10,000 Hours
Strobe
-35°C to 66°C
4.54 kg
5.62 kg
288.9 mm
231.8 mm

* Optimal hours under ideal conditions.

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)*
Solid Surface Mounting
Bracket (371BRCKT)
Shock Mount Kit (K8459A076C)
Wall Bracket (LWMB2)*
3/4" Hub Kit (K8459138A)
1" Plug Kit (K8459130A)
• Please refer to Model Number Index
371ST beginning on page 376
* Type 3R applications.

R E P L A C E M E N T PA RT S
Description
Series B Dome and Ring Assembly*
Amber Glass
Blue Glass
Clear Glass
Green Glass
Red Glass

Part Number
K8459126A
K8459126A-01
K8459126A-03
K8459126A-04
K8459126A-02

Description

Part Number

Clear, Inner Polycarbonate Dome
PC Assembly 250VDC
Gasket, Surface Mount
Strobe Tube

K8422B428A
K2001070B
K8459127A
K149122B

* Call the factory for Series A part numbers.

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:39 AM

Page 98

FEDERAL SIGNAL CORPORATION

Rotating Combination
Audible/Visual
Warning Signal
Model 400R

Federal Signal’s Model 400R audible/visual signal combines
the effective warning of a rotating light with an optional Federal
Signal Model 350 horn.

AUDIBLE AND VISUAL
WARNING IN A SINGLE
VERSATILE UNIT

The Model 400R includes a large 4.25-inch diameter rotating
reflector assembly for projecting light beams. The unit features an
incandescent lamp that produces 60 flashes per minute.
Available in five dome colors: amber, blue, clear, green and red.
The Model 400R is ideal for use wherever both audible and visual
warning signals are needed. This rugged unit is excellent for
industrial use and adaptable to most in-plant signaling needs.

•

Available in 120VAC

•

Five dome colors

•

Wall mount

•

Sounder/Horn (Model 350)
sold separately

•

Indoor use only

•

Type 3R enclosure

•

UL and cUL Listed

A modern housing design makes the Model 400R suitable for use
in institutional or non-industrial settings requiring an audible/
visual alarm system, where heavy-duty industrial equipment might
not be appropriate. Sounder/Horn (Model 350) sold separately.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

400R

120VAC 50/60Hz

0.33 amps

60

85

Wall/Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:52 AM

Page 99

ROTATING AUDIBLE/VISUAL WARNING SIGNAL (400R)

6.31"/160.3 mm
Dome
Ceramic
Socket

Lamp

10.5"/266.7 mm

Parabolic
Reflector

Chrome-Plated
Frame

Neoprene
Gasket
Synchronous
Motor
Aluminum
Housing

S P E C I F I C AT I O N S
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
Incandescent
-31°F to 150°F
4.5 lbs.
5.1 lbs.
10.5"
6.31"

Incandescent
-35°C to 66°C
2.0 kg
2.3 kg
266.7 mm
160.3 mm

• Specify model, voltage and color
• Specify options:
Audible signaling with horn (350)
and mounting kit (400HMK-AC)
sold separately
• Please refer to Model Number Index
400R beginning on page 377

R E P L A C E M E N T PA RT S
Description
Exterior Dome, Amber
Exterior Dome, Blue
Exterior Dome, Clear
Exterior Dome, Green
Exterior Dome, Red
Lamp, 120VAC

Part Number
K8547C001A-04
K8547C001A-02
K8547C001A-05
K8547C001A-03
K8547C001A-01
K8107181A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:07 AM

Page 100

FEDERAL SIGNAL CORPORATION

Strobe Combination
Audible/Visual
Warning Signal
Model 400ST

AUDIBLE AND VISUAL
WARNING IN A SINGLE
VERSATILE UNIT

Federal Signal’s Model 400ST audible/visual signal combines
the effective warning of a strobe light with an optional Federal
Signal Model 350 horn.
The Model 400ST includes a fresnel lens, providing 360-degree
flash coverage. Its strobe tube produces bright, high-intensity
flashes at 400 effective candela at 75 flashes per minute.
Available in five dome colors: amber, blue, clear, green and red.
The Model 400ST is ideal for use wherever both audible and
visual warning signals are needed. This rugged unit is excellent
for industrial use and adaptable to most in-plant signaling needs.

•

Available in 120VAC

•

Five dome colors

•

10,000 hour strobe tube

•

Wall mount

•

Sounder/Horn (Model 350)
sold separately

•

Indoor use only

•

Type 3R enclosure
(In dome up orientation)

•

UL and cUL Listed

A modern housing design makes the Model 400ST suitable for
use in institutional or non-industrial settings requiring an audible/
visual alarm system, where heavy-duty industrial equipment might
not be appropriate. Sounder/Horn (Model 350) sold separately.

Model

Voltage

Operating
Current

400ST

120VAC 50/60Hz

0.6 amps

Flash Rate/
Minute

Candela
Peak1
ECP2

Mount

75

900,000

Wall/Surface

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

400

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:07 AM

Page 101

STROBE AUDIBLE/VISUAL WARNING SIGNAL (400ST)

6.31"/160.3 mm
Dome
Clear Glass
Fresnel Lens

10.5"/266.7 mm

Strobe Tube

Solid State
Circuitry

Neoprene
Gasket

Aluminum
Housing

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
10,000 hours
Strobe
-31°F to 150°F
4.5 lbs.
5.1 lbs.
10.5"
6.31"

10,000 hours
Strobe
-35°C to 66°C
2.0 kg
2.3 kg
266.7 mm
160.3 mm

• Specify model, voltage and color
• Specify options:
Audible signaling with horn (350)
and mounting kit (400HMK-AC)
sold separately
• Please refer to Model Number Index
400ST beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Exterior Dome, Amber
Exterior Dome, Blue
Exterior Dome, Clear
Exterior Dome, Green
Exterior Dome, Red
Interior Fresnel Lens, Clear
Strobe Tube
PC Assembly, 120VAC

Part Number
K8547C001A-04
K8547C001A-02
K8547C001A-05
K8547C001A-03
K8547C001A-01
K8248C004E-04
K8107178A
K200D825E

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:19 AM

Page 106

FEDERAL SIGNAL CORPORATION

Red Aviation
Obstruction Light
Model 810DE

FAA APPROVED LIGHTING
•

Available in 120VAC

•

Dual lamps

•

116 watt lamps

•

8,000 hour lamp life

•

1-inch pipe mount

•

Optional photoelectric cell

•

Optional transfer relay

•

FAA L-810 Certified, ETL tested

Federal Signal Obstruction Lights are designed to mark tall structures
that present hazards to air navigation. When installed in accordance
with FAA AC 70/7460-1, these lights increase the conspicuity of
obstructions for pilots flying at night.
Federal Signal Model 810DE is a steady burning double obstruction
light (FAA Ref. L-810). The 810DE features a die-cast aluminum
housing with a wiring enclosure and mounts on 1" NPT pipe. The
corrosion resistant housing is sealed with aviation yellow powdercoat paint and includes stainless steel hardware. For ease of
installation and maintenance the housing is equipped with captive
cover screws, stainless steel tethers secure the glass domes and
stainless steel bands provide tool-free access to the lamp.
An optional photoelectric controller provides automatic light
activation at dusk per FAA specifications. The optional transfer
relay powers the standby lamp if the operating lamp fails. All
Federal Signal Obstruction Lights are shipped factory-assembled
with lamps and options.
The 116-Watt lamps are rated for 8000 hours of continuous use.
The Photoelectric Cells are rated at over 5000 on/off operations
for years of reliability.
Typical applications include water towers, cellular phone towers,
antennas, smoke stacks, skyscrapers and airport perimeter
fencing. For the number and placement of lights, the required
duration of operation, and recommendations for specific types of
structures, refer to FAA Advisory Circular No. 70/7460-1K.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:20 AM

Page 107

RED AVIATION OBSTRUCTION LIGHT (810DE)

15"
38.1 cm
Glass Dome

13.10"
33.27 cm

Stainless
Steel Tether

Junction Box

Optional
Transfer Relay

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Width:
Depth:

3.5"
8.89 cm

Optional
Photoelectric
Controller

HOW TO ORDER
8,000 hours
Incandescent
-35°F to 150°F
14.0 lbs.
15.0 lbs.
13.1"
15.0"
3.5"

8,000 hours
Incandescent
-37°C to 40°C
6.35 kg
6.8 kg
33.27 cm
38.1 cm
8.89 cm

• Specify model, voltage and color
• Please refer to Model Number Index
810DE beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Red with Tether
Lamp, 116W

Part Number
K8449121A
K8107234A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:08 AM

Page 102

FEDERAL SIGNAL CORPORATION

Red Aviation
Obstruction Light
Model 810S

FAA APPROVED LIGHTING
•

Available in 120VAC

•

Single lamp

•

116 watt lamp

•

8,000 hour lamp life

•

1-inch pipe mount

•

FAA L-810 Certified, ETL tested

Federal Signal Obstruction Lights are designed to mark tall structures
that present hazards to air navigation. When installed in accordance
with FAA AC 70/7460-1, these lights increase the conspicuity of
obstructions for pilots flying at night.
Federal Signal Model 810S is a steady burning obstruction light
(FAA Ref. L-810). The 810S mounts on 1" NPT pipe. For ease of
installation and maintenance the fixture is equipped with a stainless
steel tether securing the glass dome and a stainless steel band
providing tool-free access to the lamp.
The 116-Watt lamp is rated for 8000 hours of continuous use. All
Federal Signal Obstruction Lights are shipped factory-assembled
with lamps.
Typical applications include water towers, cellular phone towers,
antennas, smoke stacks, skyscrapers and airport perimeter fencing. For the number and placement of lights, the required duration
of operation, and recommendations for specific types of structures,
refer to FAA Advisory Circular No. 70/7460-1K.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:09 AM

Page 103

RED AVIATION OBSTRUCTION LIGHT (810S)

Glass Dome

Stainless Steel
Tether
9.5"
24.13 cm

4.5"
11.43 cm

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
8,000 hours
Incandescent
-35°F to 150°F
4.0 lbs.
5.0 lbs.
9.5"
4.5"

8,000 hours
Incandescent
-37°C to 40°C
1.81 kg
2.27 kg
24.13 cm
11.43 cm

• Specify model
• Please refer to Model Number Index
810S beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Red with Tether
Lamp, 116W

Part Number
K8449121A
K8107234A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:10 AM

Page 104

FEDERAL SIGNAL CORPORATION

Red Aviation
Obstruction Light
Model 810SE

FAA APPROVED LIGHTING
•

Available in 120VAC

•

Single lamp

•

116 watt lamp

•

8,000 hour lamp life

•

1-inch pipe mount

•

Optional photoelectric cell

•

FAA L-810 Certified, ETL tested

Federal Signal Obstruction Lights are designed to mark tall structures
that present hazards to air navigation. When installed in accordance
with FAA AC 70/7460-1,these lights increase the conspicuity of
obstructions for pilots flying at night.
Federal Signal Model 810SE is a steady burning obstruction light
(FAA Ref. L-810). The 810SE features a die-cast aluminum housing
with a wiring enclosure and mounts on 1" NPT pipe. For ease of
installation and maintenance the housing is equipped with captive
cover screws, a stainless steel tether secures the glass dome and
a stainless steel band provides tool-free access to the lamp.
An optional photoelectric controller provides automatic light
activation at dusk per FAA specifications. All Federal Signal
Obstruction Lights are shipped factory-assembled with lamps
and options.
The 116-Watt lamp is rated for 8000 hours of continuous use.
Photoelectric Cells are rated at over 5000 on/off operations for
years of reliability.
Typical applications include water towers, cellular phone towers,
antennas, smoke stacks, skyscrapers and airport perimeter fencing.
For the number and placement of lights, the required duration of
operation, and recommendations for specific types of structures,
refer to FAA Advisory Circular No. 70/7460-1K.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:11 AM

Page 105

RED AVIATION OBSTRUCTION LIGHT (810SE)

Glass Dome

13.94"
35.41 cm

Junction Box

5"
12.7 cm

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Width:
Depth:

Stainless Steel
Tether

Optional
Photoelectric
Controller

3.5"
8.9 cm

HOW TO ORDER
8,000 hours
Incandescent
-35°F to 150°F
10.0 lbs.
11.0 lbs.
13.94"
5.0"
3.5"

8,000 hours
Incandescent
-37°C to 40°C
4.54 kg
4.99 kg
35.41 cm
12.7 cm
8.9 cm

• Specify model, voltage and color
• Please refer to Model Number Index
810SE beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Red with Tether
Lamp, 116W

Part Number
K8449121A
K8107234A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:50 AM

Page 94

FEDERAL SIGNAL CORPORATION

Flashing Combination
Audible/Visual Signal
Model AV1

Federal Signal introduces the Model AV1 combination
audible/visual signal. The AV1 features a 100% polycarbonate
housing that is rated for Type 3R rain-tight applications. Available
dome colors include amber, blue, clear, green and red.

ECONOMICAL
AUDIBLE/VISUAL SIGNAL
•

Available in 24VDC and 120VAC

•

Surface mount, integrated 1/2 - inch
pipe mount, and 4-inch electrical
box mount

•

Five dome colors

•

Twist-off lens for easy access

•

Internal buzzer produces
85dB at 10' (95dB @ 1m)

•

Type 3R enclosure

•

UL and cUL Listed and
CSA Certified

The AV1 design provides three mounting configurations. The
black base will accommodate mounting to a 1/2-inch NPT pipe, a
4-inch octagonal electrical box or any flat surface. The surface
mount gasket serves as a template for preparing a flat surface
with appropriate mounting holes.
All AV1 units feature a unique twist and lock dome to allow for
tool-free access to the incandescent lamp. The fresnel lensing
provides superior visibility in all directions.
The integrated buzzer provides 85dB output at 10 feet (95dB @ 1
meter). The sounder is synchronized to buzz at the same rate as
the visual signal — 75 times per minute.
The AV1 comes in two voltage variations: 24VDC and 120VAC.
Each unit is factory assembled with two color-coded leads. If
desired, the user can remove the leads and connect directly to the
terminal block located in the base of the unit. The AV1 is UL and
cUL Listed and CSA Certified.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Decibels @
10'
1m

Mount

AV1

24VDC

0.98 amps

75

85

95

Pipe/Surface

AV1

120VAC

0.27 amps

75

85

95

Pipe/Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:35 AM

Page 95

AUDIBLE/VISUAL SIGNALING DEVICE (AV1)

Fresnel dome
optimizes light output

Incandescent lamp
features standard
bayonet base

Lens gasket provides a
raintight seal

Buzzer is located
under upper housing

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height (from bottom):
Diameter:

HOW TO ORDER
1,000 hours
Incandescent
-31°F to 150°F
1.25 lbs.
1.75 lbs.
6.48"
5.76"

1,000 hours
Incandescent
-35°C to 66°C
0.57 kg
0.8 kg
16.5 cm
14.6 cm

• Specify model, voltage and color
• Please refer to Model Number Index
AV1 beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Lens Gasket
Surface Mount Gasket

Part Number
K8550292A-02
K8550292A-01
K8550292A
K8550292A-04
K8550292A-03
K8550306A
K8591003A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Incandescent Lamp (24VDC)
Incandescent Lamp (120VAC)
Flasher, 24VDC
Flasher, 120VAC
Buzzer, 24VDC
Buzzer, 120VAC

Fax: 708.534.4852

K8107210A
K149123A
K8285237A-01
K8285238A-01
K8591002A-01
K8591002A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:51 AM

Page 96

FEDERAL SIGNAL CORPORATION

Strobe Combination
Audible/Visual Signal
Model AV1ST

Federal Signal introduces the Model AV1ST combination
audible/visual signal. The AV1ST features a 100% polycarbonate
housing that is rated for Type 3R rain-tight applications. Available
dome colors include amber, blue, clear, green and red.

ECONOMICAL AUDIBLE/
VISUAL SIGNAL
•

Available in 24VDC and 120VAC

•

Surface mount, integrated 1/2 - inch
pipe mount, and 4-inch electrical
box mount

•

Five dome colors

•

Twist-off lens for easy access

•

Internal buzzer produces
85dB at 10' (95dB @ 1m)

•

Type 3R enclosure

•

UL and cUL Listed and
CSA Certified

The AV1ST design provides three mounting configurations. The
black base will accommodate mounting to a 1/2-inch NPT pipe, a
4-inch octagonal electrical box or any flat surface. The surface
mount gasket serves as a template for preparing a flat surface
with appropriate mounting holes.
All AV1ST units feature a unique twist and lock dome to allow for
tool free access to the strobe tube. The fresnel lensing provides
superior visibility in all directions.
The integrated buzzer provides 85dB output at 10 feet (95dB @ 1 meter).
The AV1ST comes in two voltage variations: 24VDC and 120VAC.
Each unit is factory assembled with two color-coded leads. If
desired, the user can remove the leads and connect directly to the
terminal block located in the base of the unit. The AV1ST is UL
and cUL Listed and CSA Certified.

Model Voltage

Operating
Current

Flash Rate/
Minute

Joule
Output

Candela
Peak1
ECP2

Decibels @
10'
1m

Mount

AV1ST

24VDC

0.39 amps

65-95

2.2

175,000 51.5

85

95

Pipe/Surface

AV1ST

120VAC

0.15 amps

65-95

2.2

175,000 51.5

85

95

Pipe/Surface

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:38 AM

Page 97

AUDIBLE/VISUAL SIGNALING DEVICE (AV1ST)

Fresnel dome
optimizes light output

Strobe Tube
Lens gasket provides a
raintight seal

Buzzer is located
under upper housing

S P E C I F I C AT I O N S
Lamp Life*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height (from bottom):
Diameter:

HOW TO ORDER
7000 Hours
Strobe
-31°F to 150°F
1.25 lbs.
1.75 lbs.
6.48"
5.76"

7000 Hours
Strobe
-35°C to 66°C
0.57 kg
0.8 kg
16.5 cm
14.6 cm

• Specify model, voltage and color
• Please refer to Model Number Index
AV1ST beginning on page 377

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red

K8550292A-02
K8550292A-01
K8550292A
K8550292A-04
K8550292A-03

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PCB Assembly (120VAC)
PCB Assembly (24VDC)
Lens Gasket
Surface Mount Gasket
Strobe Tube
Buzzer, 24VDC
Buzzer, 120VAC

Fax: 708.534.4852

K2001887A
K2005083A
K8550306A
K8591003A
K149130A
K8591002A-01
K8591002A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/7/08

3:16 PM

Page 54

FEDERAL SIGNAL CORPORATION

Batter y Powered
Warning Light
Model BPL26

PORTABLE WARNING LIGHT
•

12VDC — uses two standard
6VDC lantern batteries

•

Five dome colors

•

300-hour, 5W incandescent lamp

•

Type 3R enclosure

Federal Signal’s Model BPL26 is a portable, battery powered
warning light which flashes 65 times per minute. The solid state
flasher features components which are moisture-proof and
reverse polarity protected to ensure extended battery life and
trouble-free performance.
The BPL26 is available in five fresnel dome colors; amber, blue,
clear, green and red. For increased durability, the dome is made of
impact-resistant polycarbonate materials, and the base is constructed
from a high-density polyethylene. A flexible, rubber seal covers
the on/off switch to protect it from the elements.
A steel carrying handle on the top of the unit makes this warning
light completely portable. Power is supplied by two standard
6-volt DC, spring terminal lantern batteries (not included).
The Model BPL26 is ideal for job sites requiring temporary warning
lights or for any location where primary power is unavailable.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Mount

BPL26

12VDC

0.58 amps

65

Portable

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:36 AM

Page 55

BATTERY POWERED LIGHT (BPL26)
5.5"/139.7 mm
Carrying Handle

Incandescent
Lamp

11.12"/282.5 mm

On/Off Switch

Battery Case

7.22"/183.4 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Voltage:
Net Weight:
Shipping Weight:
Height:
Width:
Diameter of Dome:

HOW TO ORDER
300 Hours
Incandescent
12VDC
1.9 lbs.
3.0 lbs.
11.12"
7.22"
5.5"

300 Hours
Incandescent
12VDC
0.86 kg
1.36 kg
282.5 mm
183.4 mm
139.7 mm

• Specify model number and color
• Please refer to Model Number Index
BPL26 beginning on page 374

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Red
Dome, Clear
Dome, Green
12VDC, 5-watt Lamp

Part Number
K8263A084A
K8263A084A-01
K8263A084A-02
K8263A084A-03
K8263A084A-04
K8107A151A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:35 AM

Page 74

FEDERAL SIGNAL CORPORATION

Batter y Powered
Strobe Warning Light
Model BPL26ST

Federal Signal’s Model BPL26ST is a portable, battery-powered
strobe warning light which flashes 65 times per minute. Components
are moisture-proof and reverse polarity protected to ensure
extended battery life and trouble-free performance.

PORTABLE WARNING LIGHT
•

12VDC — uses two standard 6VDC
lantern batteries

•

4,000 Hour strobe tube

•

Five dome colors

•

Type 3R weatherproof enclosure

•

Magnetic mount

The BPL26ST is available in five fresnel dome colors; amber, blue,
clear, green and red. For increased durability, the dome is made of
impact-resistant polycarbonate materials and the base is constructed
from a high-density polyethylene. A flexible rubber seal covers the
on/off switch to protect it from the elements.
Two Magnetic pads (not shown) are included for simple yet
secure, temporary mounting.
Power is supplied by two standard 6VDC, spring terminal lantern
batteries (not included).
The Model BPL26ST is ideal for job sites requiring temporary
warning lights or for any location where primary power is unavailable.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Mount

BPL26ST

12VDC

0.48 amps

60

Magnetic

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:11 AM

Page 75

BATTERY POWERED LIGHT (BPL26ST)
5.5"/139.7 mm

11.12"/282.5 mm

On/Off Switch

Battery Case

7.22"/183.4 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Voltage:
Net Weight:
Shipping Weight:
Height:
Width:
Diameter of Dome:

Magnetic
Mounting Pads

HOW TO ORDER
4,000 Hours
Strobe
12VDC
2.3 lbs.
3.5 lbs.
10.5"
7.22"
5.5"

4,000 Hours
Strobe
12VDC
1.04 kg
1.59 kg
266.7 mm
183.4 mm
139.7 mm

• Specify model number and color
• Please refer to Model Number Index
BPL26ST beginning on page 375

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Dome, Amber
Dome, Blue
Dome, Clear
Dome, Red
Dome, Green
Strobe Tube

K8263079A
K8263079A-01
K8263079A-04
K8263079A-02
K8263079A-03
K8107215A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/7/08

3:25 PM

Page 76

FEDERAL SIGNAL CORPORATION

Fireball ®
Strobe Warning Light
Model FB2PST and FB2PST-I

LIGHT DUTY STROBE LIGHT
•

Available in 12-24VDC, 120VAC
and 240VAC

•

Six dome colors

•

10,000 hour strobe tube

•

Integrated 1/2 - inch pipe and
surface mount

•

Indoor use only

•

Type 4X, IP66 enclosure

•

UL and cUL Listed and
CSA Certified

Federal Signal’s brightest and most compact strobe light, the
Fireball® emits a powerful "lightning bolt" flash of light.
Approximately five inches tall and four inches in diameter and
rated at 300 effective candela, the Fireball is an economical
solution to a wide variety of stationary and vehicular warning
requirements. The Fireball is available in 12-24VDC, 24VDC,
120VAC and 240VAC. All models are UL Listed and CSA Certified.
The FB2PST is available in six colors – amber, blue, clear, green,
magenta, and red.
The 24VDC Model FB2PST-I features a voltage in-rush limiting
PCB design that provides greater compatibility with factory
automation control systems and less electrical interference with
in-rush sensitive devices.
The Fireball features a unique dome that twists off easily for quick
dome and lamp replacements. The newly redesigned base features
an integrated 1/2-inch pipe mount base as well as the three holes
required for surface mount configurations. Black epoxy paint is
electrostatically applied to the base for superior corrosion resistance.
The Fireball dome and base design provides a watertight, dusttight and corrosion resistant Type 4X rating.
The FB2PST is designed for stationary pipe and surface
mount applications.
The Fireball can be used in any application where a superior visual
signal is needed. It is especially effective in the warning of industrial
hazards, process control, status indication and in areas with high
ambient noise levels.
Federal Signal’s Fireball Strobe is a very low-maintenance warning
light for industrial applications where a vibration-resistant light is
required to signal an emergency or process status.

Model

Voltage

Operating
Current

Flash Rate/
Candela
Minute
Peak1
ECP2

FB2PST

12-24VDC

1.70-0.70 amps

80

1,000,000

300

1

FB2PST-I

24VDC

0.70 amps

80

1,000,000

300

1

Mount
/2" Pipe/Surface
/2" Pipe/Surface

(2.0 amp In-rush)

5
WA

yyr

RRANT

/2" Pipe/Surface

FB2PST

120VAC 50/60Hz

0.25 amps

90

1,000,000

300

1

FB2PST

240VAC 50/60Hz

0.20 amps

90

1,000,000

300

1

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

/2" Pipe/Surface

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:13 AM

Page 77

FIREBALL ® STROBE WARNING LIGHT (FB2PST)

4.1"/100.1 mm
Impact-Resistant
Fresnel Dome

High-Powered
Strobe Tube
5.25"/133.4 mm

Easy-Access
Twist-off Dome
Built-In Strobe
Power Supply

1/2" Pipe Mount and
3-hole Surface Mount

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
10,000 Hours
Strobe
-31°F to 150°F
2.0 lbs.
2.12 lbs.
5.25"
4.10"

10,000 Hours
Strobe
-35˚C to 66˚C
0.9 kg
0.96 kg
133.4 mm
100.1 mm

• Specify model, voltage and color
• Specify options:
Corner Bracket (LCMB2)*
Wall Bracket (LWMB2)*
• Please refer to Model Number Index
FB2PST beginning on page 375
* Not Type 4X rated.

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Dome, Magenta

Part Number
K8550320A
K8550320A-01
K8550320A-02
K8550320A-03
K8550320A-04
K8550320A-05

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 12-24VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Strobe Tube, Series A, A1, A2, A3
Strobe Tube, Series A4, A5, B
120VAC Fuse

Fax: 708.534.4852

K2001202C
K200D866G
K200D866G-01
Call Factory
K8107177A
K148A155A-01

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:26 AM

Page 88

FEDERAL SIGNAL CORPORATION

Fireball ® 2
Explosion-Proof
Strobe Warning Light
Model FB2PSTX and FB2PSTX-I

Federal Signal’s FB2PSTX explosion-proof strobe light is a compact
unit that produces a “lightning bolt” flash of light. Measuring
13.69" (348mm) high and 7.44" (189mm) in diameter, the FB2PSTX
is available in 12-24VDC, 24VDC, 120VAC and 230-240VAC. These
strobe lights are well suited for a wide range of explosion-proof
warning light applications.

DESIGNED FOR USE IN
EXPLOSION-PROOF
ATMOSPHERES
•

Available in 12-24VDC, 120VAC
and 230-240VAC

•

Five lens colors

•

10,000 hour strobe tube

•

Ceiling mount standard; other
options available

•

Marine Listed

•

Type 4X, IP66 enclosure

•

UL and cUL Listed

All models are UL and cUL Listed for indoor/outdoor and marine
use. This model is UL Listed for Class I, Division 1, Groups C and
D; Class I, Division 2, Groups A, B, C and D; Class II, Division 1,
Groups E, F and G; Class II, Division 2, Groups F and G; and Class III.
Model FB2PSTX has a self-contained power supply. The copperfree aluminum finned base dissipates heat and ensures long life.
The outer dome is made of tempered glass. Polycarbonate inner
lenses are available in amber, blue, clear, green and red. A rugged
ceiling mount fixture is standard; optional wall mounts and dome
guards are also available.
The FB2PST-I features a voltage in-rush limiting PCB design that
provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices.
The Model FB2PSTX is suited for any application where a superior
visual signal is needed and is especially effective for warning of
industrial hazards, process control, status indication or in areas
with high ambient noise levels.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
ECP2
Peak1

FB2PSTX

12-24VDC

1.70-0.70 amps

80

800,000

320

FB2PSTX-I

24VDC

0.70 amps

80

800,000

320

FB2PSTX

120VAC 50/60HZ

0.25 amps

80

800,000

320

FB2PSTX

230-240VAC 50/60HZ

0.20 amps

80

800,000

320

(2.0 amp In-rush)

5 yyr
WA

RRANT

Y

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:22 AM

Page 89

EXPLOSION-PROOF STROBE LIGHT (FB2PSTX/FB2PSTX-I)

3

/4" NPT Conduit

External Ground
Set Screws
Copper-Free
Aluminum Housing
Holder

Strobe Flash Tube

Internal Lens

Glass Outer Dome

S P E C I F I C AT I O N S
Lamp Life*:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
10,000 Hours
-13°F to 149°F
9.6 lbs.
13.1 lbs.
13.69"
7.44"

10,000 Hours
-25°C to 65°C
4.35 kg
5.94 kg
348.0 mm
189.0 mm

• Specify model, voltage and color
• Specify options:
Wall Mount (WMXC)
Dome Guard (DGFBX)
• Please refer to Model Number Index
FB2PSTX beginning on page 376

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Inner Lens, Amber
Inner Lens, Blue
Inner Lens, Clear
Inner Lens, Green
Inner Lens, Red
Outer Dome Assembly
PC Assembly, 12-24VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Strobe Tube

K8550292A-02
K8550292A-01
K8550292A
K8550292A-04
K8550292A-03
K8550272A-01
K2001202C
K200D866G
K200D866G-01
K8107177A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:20 AM

Page 28

FEDERAL SIGNAL CORPORATION

FireBeam ®
Compact Vehicular
Warning Light
Model FB3SM

OUR BRIGHTEST VEHICULAR
WARNING LIGHT!

Federal Signal’s FireBeam® is a super-bright, compact vehicular
warning light. This rotating 55-watt halogen light produces 68,000
candelas per flash.
Each lightweight unit features a polycarbonate base and snap-on
dome. The light is easily and quickly serviced without the use
of tools.
The jewel-shaped lens is available in five colors: amber, blue,
clear, green, and red. Each FireBeam comes with a black halfdome that snaps over the back of the unit and prevents back flash
when used inside vehicles.

•

Available in 12VDC

•

68,000 candela output

•

55-watt Halogen lamp

•

Dual Speed Motor for 95
or 175 FPM

The FireBeam features a dual speed motor with a convenient slide
switch that allows you to choose an operating speed of 95 or 175
flashes per minute.

•

Five dome colors

Power is supplied to the FireBeam via a 10-foot coil cord with a
cigarette lighter-type plug. The FireBeam operates on 12VDC.

•

Low profile — only 3.8" high

The FireBeam is supplied with both a magnetic mount for use
outside the vehicle on the roof or hood and a swivel mount for
permanent installation.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Output

FB3SM

12VDC

4.3 amps

95 or 175

68,000

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:24 AM

Page 29

FIREBEAM ® COMPACT VEHICULAR WARNING LIGHT (FB3SM)

Mounting Options:
Optional
Snap-On Half Lens
in Black eliminates
backflash

2556-02

55-Watt
Halogen Lamp
.1
C
O
S
2
H
-

3
07
01
20

Rotating Parabolic
Reflector operates
at 95 or 175 flashes
per minute

+

5
H D
E
R

3 D
H E
B
IB
R +

4
H CK
A
L
B 1
R

A
A

10-foot electrical
coil-cord features
a cigarette lighter
type plug for
12VDC power

2556-03
2556-01

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Net Weight:
Shipping Weight:
Height:
Width:
Depth:

HOW TO ORDER
200 hours
Halogen
1.8 lbs.
2.0 lbs.
4.8"
3.8"
5.1"

200 hours
Halogen
0.8 kg
0.9 kg
12.0 cm
9.5 cm
13.0 cm

• Specify model and color
• Please refer to Model Number Index
FB3SM beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Dome, Amber
Dome, Blue
Dome, Clear
Dome, Red
Dome, Green

K8550137A-02
K8550137A-03
K8550137A
K8550137A-01
K8550137A-04

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

55-Watt Halogen Lamp, 12VDC
Motor for FB3SM
Half Lens Cover, Black
Cigarette Plug Cord
Magnet Mount Assembly

Fax: 708.534.4852

K8440A265A-02
K8422B463B-02
K8550140A
K8550318A
K8550A012A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:11 AM

Page 62

FEDERAL SIGNAL CORPORATION

Streamline ®
Low Profile
Mini Strobe
Model LP1

Federal Signal introduces the Model LP1 low profile strobe light.
This rectangular Type 4X strobe light is available in five colors:
amber, blue, clear, green and red. The LP1 is designed to be flush
mounted to control panels or other flat surfaces. Mounting is
accomplished with two supplied 11/4", 8/32 slotted hex bolts. A
polypropylene gasket is supplied to create a water-tight and dusttight seal. The gasket mounts between the base of the light and
the mounting surface.

COMPACT, ECONOMICAL
STROBE LIGHT — IDEAL
FOR CONTROL PANEL
APPLICATIONS

The user replaceable strobe tube is rated for 4,000 hours of life.
The LP1 is available in 12VDC, 24VDC, 120VAC and 240VAC versions.
The unit is UL Listed. Access to the printed circuit board and
strobe tube is provided through the back of the unit.

•

Available in 12VDC, 24VDC,
120VAC and 240VAC

•

Easy access dome available in
five colors

•

Surface mount

•

Low profile — only 2.6" High by
2.33" Wide by 5" Long

•

Type 4X, IP65 enclosure

•

UL Listed

With its Type 4X rating, small size, and bright signal, the LP1 suits
an endless number of applications. The LP1 is especially suited
for use on control panels, machines, above entry ways, on walls,
and along assembly lines. The 12/24VDC units are suitable in
battery backup systems and vehicular applications such as
forklifts and moving guided vehicles.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1
ECP2

Mount

LP1

12VDC

0.18 amps

80

108,000

30

Surface

LP1

24VDC

0.08 amps

80

108,000

30

Surface

LP1

120VAC

0.06 amps

80

108,000

30

Surface

LP1

240VAC

0.03 amps

80

108,000

30

Surface

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:45 AM

Page 63

LOW-PROFILE MINI STROBE (LP1)

Gasket

Strobe Tube
One piece construction

Unit assembles
and mounts
with two (2) 11/4"
8/32 slotted hex bolts

Vertical and
horizontal lensing
provides
superior visibility

S P E C I F I C AT I O N S
Lamp Life:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Width:
Length:

HOW TO ORDER
4,000 hours
Strobe
-31°F to 151°F
0.23 lbs.
0.6 lbs.
2.61"
2.33"
5.05"

4,000 hours
Strobe
-35°C to 66°C
0.1 kg
0.27 kg
6.63 cm
5.92 cm
12.83 cm

• Specify model, voltage and color
• Please refer to Model Number Index
LP1 beginning on page 374

R E P L A C E M E N T PA RT S
Description
Replacement Strobe Tube
Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red

Part Number
K149128A
K8435711A-02
K8435711A-03
K8435711A
K8435711A-04
K8435711A-01

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:44 AM

Page 44

FEDERAL SIGNAL CORPORATION

Streamline ®
Low Profile Light
Model LP2

PERFECT SIZE MEETS
SUPERIOR PERFORMANCE
•

Available in 24VAC/VDC
and 120VAC

•

Surface or panel mount

•

Steady burning

•

Five dome colors

•

Type 4X enclosure

•

Low profile — only 2.5" H x 3"
diameter (65mm x 76mm)

•

Built-in strain relief

•

Incandescent lamp included

•

UL and cUL Listed and
CE Compliant

The Streamline® Model LP2 is a unique, steady burning incandescent
light, ideal for both horizontal and vertical panel mount installation.
This device mounts easily through any 1.54" (39mm)
diameter hole; a lock nut secures the light firmly in place. A gasket
positioned above the mounting surface assures a water-tight and
dust-tight fit. The lamp is easily replaced from below the mounting
surface. Inherent strain relief secures all wiring from the rear, for
added durability. The enclosure consists of a polycarbonate dome
in five colors (amber, blue, clear, green and red), and a polyamide
base; the enclosure with gasket is rated Type 4X.
A 6-watt incandescent lamp is included with the 24VAC/DC and
120VAC units. The double-contact bayonet base (Type S-6) is a
standard lamp style, readily available when replacement is
required. Lamp life is approximately 1,500 hours when run on
AC power.
Like all Federal Signal products, the StreamLine LP2 is designed
with customer applications in mind. The LP2 functions in most
PLC applications (including triac outputs). Careful consideration
has been given to the relationship between lamp shape and lens
design for maximum light output.
When your application calls for a compact signal with unparalleled
reliability, Federal Signal’s Streamline products are the clear choice.

Model

Voltage

Power

Operating
Current

LP2

24VAC/DC

6 watts

0.30 amps

LP2

120VAC

6 watts

0.06 amps

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

12:27 AM

Page 45

STREAMLINE ® LOW PROFILE LIGHT (LP2)

3" (76mm)
Lens

2.68" (68mm)

Gasket

2.5"
(65mm)

Mounting
Surface

Mounting
Lock Nut
Bayonet-Base
Lamp

0.63"
(16mm)

0.28" (7mm)

1.26"
(32mm)

Lamp
Holder
Inherent Strain
Relief Mechanism

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height — above surface:
Height — below surface:
Diameter:

1.46"
(37mm)

HOW TO ORDER
1,500 hours
Incandescent
-4°F to 140°F
3.4 oz.
4.5 oz.
2.5"
1.26"
3.0"

1,500 hours
Incandescent
-20°C to 60°C
96.4 g
127.6 g
65.0 mm
32.0 mm
75.0 mm

• Specify model, voltage and color
• Please refer to Model Number Index
LP2 beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lamp, 24VAC/DC
Lamp, 120VAC

Part Number
K8107195A
K8107195A-01

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/7/08

3:20 PM

Page 66

FEDERAL SIGNAL CORPORATION

Streamline ®
Low Profile
Strobe Light
Models LP3S, LP3E, LP3M

PERFECT SIZE MEETS
SUPERIOR PERFORMANCE
•

LP3S and LP3M are available in
12-48VDC, 120VAC and 240VAC;
LP3E in 120VAC

•

Surface mount, Edison mount, or
integrated 1/2 - inch pipe mount

•

Five dome colors

•

Screw-on lens provides easy
access

•

Low profile — Model LP3S is
only 5" high

•

Type 4X, IP66 enclosure

•

PLC and triac compatible

•

UL and cUL Listed, CSA Certified
and CE Approved*

5
WA

RRANT

Y

The LP3 is offered in three mounting configurations: the LP3S
features a three-hole surface mount — ideal for control panels
and other flat or flush surfaces; the LP3E features a standard A-19
medium Edison screw base; the LP3M features a 1/2" male pipe
mount and 18' wire leads.
Both the LP3S and LP3M include a surface gasket to complete
the Type 4X installation. An optional dome guard is available for
use with the LP3M when installed flush with a panel. All LP3 units
feature a unique threaded screw-on lens to provide for tool free
wiring and strobe tube replacement. The strobe tube is rated for
7,000 hours.
LP3 comes in three voltage variations: 12-48VDC, 120VAC and
240VAC. The state-of-the-art strobe mechanism produces 2.2
joules of energy, while drawing relatively low amperage.

* CE Approval for S, M models only.

yyr

Federal Signal introduces the Model LP3 low profile strobe light.
This Type 4X strobe is available in five colors: amber, blue, clear,
green and red.

StreamLine® strobes feature high-quality, long-life strobe tubes
which are designed to reduce tungsten build-up for longer lamp
maintenance cycles. Careful consideration is given to the relationship
between tube shape and lens design for maximum light output.
StreamLine products make use of surface mount technology,
which provides a more powerful light in a much smaller package.
The high-quality dry-electrolyte capacitor used in StreamLine
products runs cooler than those used in many competitive
strobes, resulting in a more reliable product that won’t fail due
to overheating.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Joule
Output

Candela
Peak1
ECP2

LP3

12-48VDC

0.44-0.10 amps

65-95

2.2

175,000

51.5

LP3

120VAC

0.10 amps

65-95

2.2

175,000

51.5

LP3

240VAC

0.07 amps

65-95

2.2

175,000

51.5

1
2

Peak candela is the maximum light intensity generated by a flashing light during its light pulse
ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/11/08

8:29 AM

Page 67

STREAMLINE ® LOW PROFILE STROBE LIGHT (LP3S/LP3E/LP3M)

LP3S
Dome
Lens
Gasket
Set Screw
" )
.25 4mm
(6.

Power
Connection
Schematic

A-19 Medium
Edison
Screw-in Base

Custom
Strobe Tube

LP3E

Snap-in Printed
Circuit Board
Assembly
Surface
Mount
Base
Gasket
1
/2" Male
Pipe Mount

Mounting
Surface

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Diameter:
Height (from bottom):
LP3S
LP3E
LP3M

LP3M

HOW TO ORDER
7,000 hours
Strobe
-31°F to 150°F
7.3 oz.
8.5 oz.
3.125"

7,000 hours
Strobe
-35°C to 66°C
206.96 g
240.98 g
7.94 cm

5.0"
6.1"
5.8"

12.7 cm
15.5 cm
14.7 cm

• Specify model, voltage and color
• Specify options
Wire/Dome guard for LP3S and
LP3M (LP3G)
• Please refer to Model Number Index
LP3 (E.M) beginning on page 375

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Strobe Tube

K8589063A
K8589063A-01
K8589063A-02
K8589063A-03
K8589063A-04
K149130A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 12-48VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Gasket, Lens
Gasket, Base LP3S

Fax: 708.534.4852

K2001316B
K2001317A
K2001317A-01
K8589013A
K8589011A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/11/08

11:56 PM

Page 46

FEDERAL SIGNAL CORPORATION

StreamLine ®
Low Profile
Steady Burning Light
Models LP3MI, LP3PI, LP3TI

COMPACT, ECONOMICAL
AND FLEXIBLE
•

Available in 24VDC and 120VAC

•

T-mount, integrated 1/2 - inch pipe
mount or 1/2 - inch male pipe mount

•

Incandescent lamp included

•

Five dome colors

•

Screw-on lens

•

Type 4X enclosure

•

Optional wire guard

•

UL and cUL Listed and
CSA Certified

Federal Signal introduces the Model LP3I low profile steady burning
light. The Type 4X light is available in five colors: amber, blue,
clear, green, and red.
The LP3I is offered in three mounting configurations. LP3PI
features an integrated 1/2-inch NPT pipe mount. LP3MI features
an integrated 1/2-inch male pipe mount. The "T-mount" LP3TI has
a popular 2-hole design for wall or flush mounting.
Both the LP3MI and LP3TI include a surface gasket to complete
the Type 4X installation. All LP3I units feature a threaded screw-on
lens. The LP3I comes in two voltages: 24VDC and 120VAC.
A 15-watt incandescent lamp is included with all units. The lamp
features a standard double-contact bayonet base readily available
when replacement is required.
Like all Streamline® products, the LP3I is designed with OEM
applications in mind. It is economical, easy to install and attractive.
Careful consideration has been given to the relationship between
lamp shape and lens design for maximum light output.
When your application calls for a compact signal with unparalleled
reliability, Federal Signal’s Streamline products are the clear choice.

Model

Voltage

Power

Operating
Current

LP3I

24VDC

15-watts

0.67 amps

LP3I

120VAC

15-watts

0.13 amps

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

12:51 AM

Page 47

STREAMLINE ® LOW PROFILE STEADY BURN LIGHT (LP3MI/LP3PI/LP3TI)

LP3MI
Dome

Housing

Set Screw
Lens
Gasket

1
/2"
Pipe Mount

Lamp

LP3PI

Housing

Male
Pipe
Housing

T-mount
Gasket

Gasket

Mounting
Surface

Mounting
Surface

LP3TI

Locknut

S P E C I F I C AT I O N S
Operating Temperature:
Net Weight:
Shipping Weight:
Diameter:
Height (from bottom):
LP3PI
LP3MI
LP3TI

HOW TO ORDER
-31°F to 150°F
7.3 oz.
8.5 oz.
3.13"

-35°C to 65°C
206.96 g
240.98 g
7.95 cm

5.7"
5.8"
5.1"

14.48 cm
14.7 cm
12.95 cm

• Specify model, voltage and color
• Specify options (wire guard - LP3G)
• Please refer to Model Number Index
LP3I beginning on page 373

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Lens, Amber
Lens Blue
Lens, Clear
Lens, Green
Lens, Red

K8589063A
K8589063A-01
K8589063A-02
K8589063A-03
K8589063A-04

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description
Lamp, 120VAC
Lamp, 24VDC
Gasket, LP3TI
Gasket, Lens

Fax: 708.534.4852

Part Number
K8107194A
K8107227A
K8589012A
K8589013A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/11/08

11:57 PM

Page 48

FEDERAL SIGNAL CORPORATION

StreamLine ®
Low Profile LED Light
Model LP3SL, LP3PL, LP3TL, LP3ML

ECONOMICAL
AUDIBLE/VISUAL SIGNAL
•

Available in 24VDC and 120VAC

•

T-mount, integrated 1/2 - inch pipe
mount, 1/2 - inch male pipe mount
or surface mount

•

Five dome/lens colors available

•

100,000 LED lamp life*

•

Screw on lens

•

Type 4X enclosure

•

Optional wire lens guad

•

UL and cUL Listed and
CSA Certified

Federal Signal introduces the Model LP3L low profile LED light.
The Type 4X light is available in five LED/lens color combinations;
amber, blue, clear, green and red. All LP3 models feature the easy
access screw on lens.
The LP3L is offered in four mounting configurations; LP3PL
with an integrated 1/2-inch NPT pipe mount, LP3ML features an
integrated 1/2-inch male pipe mount, LP3TL features a T formation
base with 2 mounting holes for wall or flush mounting and the
LP2SL features a three hole surface mounting configuration. The
T-mount and Surface mount units include surface gaskets to
maintain the 4X installation.
The LP3L series is available in 24VDC and 120VAC. All models
include the vibration resistant, double contact bayonet style
100,000 hour LED module.
Like all StreamLine® products, the LP3L is designed with OEM
applications in mind. It is economical, easy to install and
attractive. Careful consideration has been given to the relationship
between the LED light source and the lens design for maximum
light output.
When your application calls for a compact signal with
unparalleled reliability, Federal Signal’s StreamLine products
are the clear choice.

Model

Voltage

Operating
Current

LP3L

24VDC

0.08 amps

LP3L

120VAC

0.13 amps

* Optimal hours under ideal conditions.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/9/08

3:14 PM

Page 49

STREAMLINE ® LOW PROFILE LED LIGHT (LP3SL/LP3PL/LP3TL)
LP3SL
Dome

Housing

Set Screw
Lens
Gasket

1
/2"
Pipe Mount

LED
Module

LP3PL

Housing
T-mount
Gasket

Mounting
Surface

Gasket

S P E C I F I C AT I O N S
Lamp Life*:
Operating Temperature:
Net Weight:
Shipping Weight:
Diameter:
Height (from bottom):
LP3PL
LP3ML
LP3TL
LP3SL

LP3TL

HOW TO ORDER
100,000 hours
-31°F to 150°F
0.46 lbs.
0.53 lbs.
3.13"

100,000 hours
-35°C to 65°C
206.96 g
240.98 g
7.95 cm

5.7"
5.8"
5.1"
5.0"

14.48 cm
14.7 cm
12.95 cm
12.7 cm

• Specify model, voltage and color
• Specify options (wire guard - LP3G)
• Please refer to Model Number Index
LP3L beginning on page 374

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Amber
Lens Blue
Lens, Clear
Lens, Green
Lens, Red
Gasket, LP3TL
Gasket, LP3SL
Gasket, Lens

Part Number
K8589063A
K8589063A-01
K8589063A-02
K8589063A-03
K8589063A-04
K8589012A
K8589011A
K8589013A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description
LED, 24V Amber
LED, 24V Blue
LED, 24V Clear
LED, 24V Green
LED, 24V Red
LED, 120V Amber
LED, 120V Blue
LED, 120V Clear
LED, 120V Green
LED, 120V Red
Fax: 708.534.4852

Part Number
K8107199A
K8107199A-03
K8107199A-04
K8107199A-02
K8107199A-01
K8107200A
K8107200A-03
K8107200A-04
K8107200A-02
K8107200A-01
www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/11/08

11:58 PM

Page 64

FEDERAL SIGNAL CORPORATION

StreamLine ®
Low Profile
Strobe Light
Models LP3P, LP3S, LP3T

PERFECT SIZE MEETS
SUPERIOR PERFORMANCE

Federal Signal introduces the Model LP3 low profile strobe light.
This Type 4X strobe is available in five colors: amber, blue, clear,
green and red. An optional dome wire guard is available for the
LP3S and LP3T.
The LP3 is offered in three mounting configurations. LP3P features
an integrated 1/2-inch NPT pipe mount. LP3S features a three-hole
surface mount — ideal for control panels and other flat or flush
surfaces. The “T-mount” LP3T has a popular 2-hole design for
wall or flush mounting.

•

Available in 12-48VDC, 120VAC
and 240VAC

•

Surface mount, T-mount, or
integrated 1/2 - inch pipe mount

•

Five dome colors

•

Screw-on lens

Both the LP3S and LP3T include a surface gasket to complete the
Type 4X installation. An optional dome guard is available for use
with the LP3S and LP3T. All LP3 units feature a threaded screwon lens that provides tool-free wiring and strobe tube replacement.
The strobe tube is rated for 7,000 hours.

•

Low profile — Model LP3S
is only 5" high

The LP3 comes in three voltage variations: 12-48VDC, 120VAC
and 240VAC. The state-of-the-art strobe mechanism produces 2.2
joules of energy, while drawing relatively low level amperage.

•

Type 4X, IP66 enclosure

•

PLC and triac compatible

•

Optional dome guard

•

UL and cUL Listed, CSA Certified
and CE Approved*
* CE Approval for P, S models only.

5
WA

yyr

RRANT

Model

Voltage

Operating
Current

Flash Rate/
Minute

Joule
Output

Candela
ECP2
Peak1

LP3

12-48VDC

0.44-0.10 amps

65-95

2.2

175,000

51.5

LP3

120VAC

0.10 amps

65-95

2.2

175,000

51.5

LP3

240VAC

0.07 amps

65-95

2.2

175,000

51.5

1

Y

StreamLine® strobes feature high-quality, long-life strobe lamps
which are designed to reduce tungsten build-up for longer lamp
maintenance cycles. Careful consideration is given to the relationship
between lamp shape and lens design for maximum light output.
StreamLine products make use of surface mount technology,
which provides a more powerful light in a much smaller package.
The dry-electrolyte capacitor used in StreamLine products runs
cooler than those used in many competitive strobes, resulting in a
more reliable product that won’t fail due to overheating.

2

Peak candela is the maximum light intensity generated by a flashing light during its light pulse
ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/10/08

8:16 PM

Page 65

STREAMLINE ® LOW PROFILE STROBE LIGHT (LP3S/LP3P/LP3T)

LP3S
Dome

Housing

Lens
Gasket
Set Screw
" )
.25 4mm
(6.

1
/2"
Pipe Mount

Custom
Strobe Tube

Power
Connection
Schematic

LP3P

Snap-in Printed
Circuit Board
Assembly
Housing

Surface
Mount
Housing

T-mount
Gasket

Gasket

Mounting
Surface

Mounting
Surface

LP3T**
**LP3T-120 & 240VAC shown

S P E C I F I C AT I O N S
Lamp Life:*
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Diameter:
Height (from bottom):
LP3P
LP3S
LP3T

HOW TO ORDER
7,000 hours
Strobe
-31°F to 150°F
7.3 oz.
8.5 oz.
3.125"

7,000 hours
Strobe
-35°C to 66°C
206.96 g
240.98 g
7.94 cm

5.7"
5.0"
5.1"

14.48 cm
12.7 cm
12.95 cm

• Specify model, voltage and color
• Specify options
Wire/Dome guard for LP3S, LP3T
(LP3G)
• Please refer to Model Number Index
LP3 (P,S,T) beginning on page 374

*Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red
Strobe Tube

K8589063A
K8589063A-01
K8589063A-02
K8589063A-03
K8589063A-04
K149130A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 12-48VDC
PC Assembly, 120VAC
PC Assembly, 240VAC
Gasket, Lens
Gasket, LP3S
Gasket, LP3T
Fax: 708.534.4852

K2001316B
K2001317A
K2001317A-01
K8589013A
K8589011A
K8589012A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

1:17 AM

Page 70

FEDERAL SIGNAL CORPORATION

Streamline ®
Low Profile
Mini Strobe
Model LP6

The Model LP6 is a very compact, high power strobe light
designed for applications where space is critical. At 35/8" high, this
strobe light is ideal for fork lift applications where head room is
important. The LP6 also mounts easily to small control panels.

COMPACT, ECONOMICAL
STROBE LIGHT
•

Available in 12-48VDC and 120VAC

•

Screw-on dome available in
five colors

•

Surface mount

•

Low profile — only 35/8" high

•

Type 4X enclosure

•

UL and cUL Listed and
CSA Certified

The LP6 features a two joule power supply that works in multiple
voltages from 12-48VDC to 120VAC. Modular construction incorporates
a powerful flash tube and vibration resistant circuit board.
The LP6 housing utilizes a unique screw-on dome for easy
relamping and service. The polycarbonate base and lens combination
gives this strobe excellent impact and corrosion resistance and
meets Type 4X requirements. The LP6 is also UL Listed, cUL
Listed and CSA Certified.
The LP6 is available in five colors — amber, blue, clear, green
and red.
This economical light does not sacrifice power for price or size.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Joule
Output

Candela
ECP2
Peak1

LP6

12-48VDC

0.44-0.10 amps

65-95

2.2

175,000

51.5

LP6

120VAC

0.10 amps

65-95

2.2

175,000

51.5

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

2

ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:06 AM

Page 71

STREAMLINE ® LOW PROFILE MINI STROBE (LP6)

Screw-On
Dome

#10-32 Pan
Head Screws (3)

Lexan™ Surface
Mounting Base

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
7,000 hours
Strobe
-31˚F to 150˚F
0.65 lbs.
0.85 lbs.
3.63"
5.0"

7,000 hours
Strobe
-35˚C to 65˚C
0.29 kg
0.39 kg
9.2 cm
12.7 cm

• Specify model, voltage and color
• Please refer to Model Number Index
LP6 beginning on page 375

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Dome, Amber
Dome, Blue
Dome, Clear
Dome, Green
Dome, Red

K8589037A
K8589037A-01
K8589037A-02
K8589037A-03
K8589037A-04

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

PC Assembly, 012-048VDC
PC Assembly, 120VAC
O-Ring
Base Gasket
Strobe Tube

Fax: 708.534.4852

K2005083A-01
K2001887A-02
K8589038A
K8589039A
K149130A

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/11/08

9:40 PM

Page 92

FEDERAL SIGNAL CORPORATION

StreamLine ®
Low Profile
Combination
Sounder/Strobe
Model LP7
Providing an audible/visual warning, the LP7 sounder/strobe
combines the features of a mini sounder with a fully integrated
xenon strobe circuit. The result is an attractive unit suitable for
internal or external locations where a combination of high sound
output and visual signal is required.

PERFECT SIZE MEETS
SUPERIOR PERFORMANCE

The strobe color choices include amber, clear, green, blue or red.
The unit comes with a standard shallow base. An optional deeper
base allows 20mm diameter conduit entry.

•

Available in 18–30VDC

•

Fully integrated xenon strobe circuit

•

Five dome colors — Amber, Blue,
Clear, Green, Red

Operating voltage ranges from 18-30VDC with an average of only
68mA current consumption.
The LP7 has two switchable tone patterns - “Sweeping”
and “Continuous”.

•

Heavy duty ABS plastic body

•

Type 4X, IP54 (IP65 with optional
deep base)

The LP7 has a range of 82dB–100dB @ 10' (92–110dB @ 1m),
dependent upon tone selected. Volume control allows for 20dB
of adjustment.

•

82–100dB @ 10'
(92–110dB @ 1m)

The LP7 features a bright xenon strobe that produces 0.7 Joules
of flash energy with a flash frequency of 60 flashes per minute.
The beacon will operate with any tone selected.

•

Type 4X, IP54 (IP65 with optional
deep base)

The Federal Signal Model LP7 sounder/strobe is PLC compatible.
It is ideal for wall or panel mount applications where low voltage
is required.

•

CE Compliant

Model

Voltage

Operating
Current

Flash Rate/
Minute

Joule
Output

Decibels @
10'
1m

LP7

18-30VDC

0.068 amps

60

0.7

82-100

92-110

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:33 AM

Page 93

STREAMLINE ® LOW PROFILE SOUNDER/STROBE (LP7)

3.5"/88.9 cm

3.66"/93 cm

S P E C I F I C AT I O N S
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
-40°F to 176°F
11.1 oz.
13.5 oz.
3.5"
3.66"

-40°C to 80°C
315.0 kg
383.0 kg
88.9 cm
93.0 cm

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

• Specify model, voltage and color
• Specify options:
Deep Base (DBLP)
• Please refer to Model Number Index
LP7 beginning on page 377

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:50 PM

Page 18

FEDERAL SIGNAL CORPORATION

Litestak ®
Status Indicator
Models LSB and LSL

NOTIFY STATUS CHANGES
WITH COLOR AND SOUND
•

Available in 24VDC, 120VAC
and 240VAC

•

Five lens colors

•

Surface mount and integrated
3
/4 - inch pipe mount

•

Indoor use only

•

Type 1 enclosure

•

Optional sounder available

•

UL and cUL Listed and
CSA Certified

5
WA

RRANT

Litestak’s lensing provides a 360° visual signal. Individual light
modules may be set to either flash or burn steadily. The flasher
is included with the 120VAC LSB model and sold separately for
other voltages.
Each light module consists of two impact-resistant polycarbonate
lens halves that snap apart to provide easy maintenance and
interchangeability of colors.
Litestak units can be installed on a 3/4" pipe mount or surface
mounted with the Model LSB Base. If low profile surface mounting is required, Model LSBS is available.
Litestak is UL and cUL Listed, and CSA Certified for indoor use.
Multiple lens colors can communicate machine shutdown, shortage
of materials, supervisor attention, etc. Ideal applications for the
Litestak include assembly lines, instrument panels, workcells, etc.
Federal Signal’s Litestak is an economical device for increasing
productivity in any manufacturing environment.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela

Mount

LSB

3

24-240VAC/DC

N/A

1

N/A

N/A

3

LSB

3

120VAC 50/60Hz

N/A

1

70

N/A

3

1

1

1
1

/4" Pipe/Surface
/4" Pipe/Surface

24-240VAC/DC

N/A

N/A

N/A

Low Profile Surface

LSL2

24VDC

0.76 amps

N/A1

123

N/A1

LSL2

120VAC 50/60Hz

0.13 amps

N/A1

123

N/A1

LSL2

240VAC 50/60Hz

0.11 amps

N/A1

123

N/A1

LSBS

yyr

Federal Signal’s Litestak® status indicator is a column of signal
lights that indicate the status of a process or machine. The units
may include up to five Light Modules (Model LSL) available in
amber, blue, clear, green and red; or four light modules plus an
optional Sound Module (Models LSS or LSH) to create a dual
purpose audible/visual status indicator. The Sound Module always
occupies the top position of a Litestak unit.

3

1

Not Applicable

2

Model LSL includes lens, lamp and light module.

3

Cap kit included.

1

1

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:55 PM

Page 19

LITESTAK ® LIGHT (LSL) AND BASE (LSB)
4"/101.6 mm

2

B

Spring Design
Contacts Resist
Vibration

1

2

3

A

C

1

A

3

Mounting Options
Litestak™
Light Module
(Model LSL)

B

3

2

B

Top Cap

Easy to install
snap rivets

1

C
A
2

1

13.05"

Lamp
1

2

3

A

Snap-Apart
Polycarbonate Lens
Halves

16.03

C

3

19.35"

2

Litestak® Heights

B

B) LSB Base

1

A) LSBS Low Profile Base

3

3.25"/
82.5 mm

290A

9.8"
6.55"

Base Unit
(Model LSB)
3.93"/99.8 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
LSL
LSB
Shipping Weight: LSL
LSB
Height:
LSL
LSB
Diameter:
LSL
LSB

HOW TO ORDER
7,000 Hours
Incandescent
0°F to 120°F
0.5 lbs.
0.75 lbs.
0.8 lbs.
1.0 lbs.
3.25"
3.3"
3.93"
3.93"

7,000 Hours
Incandescent
-18°C to 49°C
0.2 kg
0.3 kg
0.4 kg
0.4 kg
82.5 mm
82.8 mm
99.8 mm
99.8 mm

• Light modules and base modules
are ordered separately
• Specify model and voltage of base
unit
• Specify model, voltage and colors
of light modules
• Specify optional sound module
(page 24 & 26)
• Please refer to Model Number
Index LSL/LSB beginning on
page 372

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens Kit, Amber
Lens Kit, Blue
Lens Kit, Clear
Lens Kit, Green
Lens Kit, Red
Lens Kit, Blackout (1/2 lens)
Snap Rivets, 25 pieces

Part Number
K8447014A-02
K8447014A-04
K8447014A-05
K8447014A-01
K8447014A-03
K8447014A-06
K7099A112A-01

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Lamp, 24VDC
Lamp, 120VAC
Lamp, 240VAC
Flasher, 24VDC
Flasher, 120VAC
Cap Kit-Snap Rivets included

Fax: 708.534.4852

K8107210A
K8107194A
K8107A149A
K8285237A
K8285239A
K8447009E

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:56 PM

Page 26

FEDERAL SIGNAL CORPORATION

Litestak ®
Piezoelectric Horn
Model LSH

A SINGLE-TONE HORN
FOR LITESTAK® STATUS
INDICATORS
•

Available in 24VDC, 120VAC
and 240VAC

•

Adjustable volume

•

Capable of producing
75-77dB @ 10' (85-87dB @ 1m)

•

Indoor use only

•

Type 1 enclosure

•

UL Listed and CSA Certified

The Litestak® LSH Horn is a piezoelectric unit that employs a
ceramic element which expands or bends when voltage is applied,
generating a single tone. The Model LSH can be used as a standalone audible device (with the LSB pipe/surface mount base or
LSBS surface mount base), or combined with the Federal Signal
Litestak light modules to create a combination audible/visual signal.
The LSH Horn is a modular unit which mounts directly onto the
top of any Litestak light or base (sound units must be positioned
at the top module of the status indicator). A black speaker grille
cover protects the horn. The volume can be adjusted by
removing the grille covers and turning the volume control below
the horn mechanism.
The 24VDC and 240VAC LSH units produce 75dB @ 10' (85dB @
1m); the 120VAC unit produces 77dB @ 10' (87dB @ 1m).
Litestak is UL Listed for indoor use and CSA Certified.
Ideal applications for Litestak audible/visual status indicators
include assembly lines, conveyor systems, automated lines,
instrument panels, workshops, etc.
Federal Signal’s Piezoelectric Horn is an inexpensive way to add
an audible signal to Litestak Status Indicators.

Model

Voltage

Operating
Current

Decibels @
10'
1m

LSH

24VDC

70 mA

75

85

LSH

120VAC

40 mA

77

87

LSH

240VAC

40 mA

75

85

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:56 PM

Page 27

LITESTAK ® PIEZOELECTRIC HORN (LSH)

4"/101.6 mm

VOLUME ADJUSTER

Piezoelectric
Sound Module
(Model LSH)

1

2

3

A

1

C

2

B

Cap
(Supplied with
four plastic pins)

3

OPEN

3.25"/82.6 mm
Split Grille
pries open at
screwdriver slots

1

2

3

A

C

B

1

2

3

CLOSE

Base Unit
(Model LSB)
Volume adjustment knob
on underside of Piezo Horn
twists open or closed.

3034

3.93"/
99.8 mm

S P E C I F I C AT I O N S
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
32°F to 120°F
0.45 lbs.
0.65 lbs.
3.25"
3.93"

0°C to 49°C
0.2 kg
0.3 kg
82.6 mm
99.8 mm

• Specify model and voltage of sound
module (base required, page 18)
• Please refer to Model Number Index
LSH beginning on page 372

R E P L A C E M E N T PA RT S
Description
Grille Kit, Black
Piezo Horn, 24VDC
Piezo Horn, 120VAC
Piezo Horn, 240VAC

Part Number
K8447014A-10
K8447040A
K8447040A-01
K8447040A-02

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:53 PM

Page 22

FEDERAL SIGNAL CORPORATION

Litestak ®
Homeland Security
Status Indicator
Model LSHLS

NOTIFY HOMELAND
SECURITY STATUS CHANGES
•

Available in 24VDC and 120VAC

•

Five lens colors

•

Surface mount and integrated
3
/4 - inch pipe mount

•

Available with LED or
Incandescent Lamps

•

Indoor use only

•

Type 1 enclosure

•

Made in the USA

•

UL and cUL Listed and
CSA Certified

Federal Signal, the world’s largest prime manufacturer of audible
and visual signaling for industry has introduced a Homeland
Security Advisory Status Indicator. The LiteStak® is an effective
tool for communicating the Threat Conditions as outlined in the
Homeland Security Presidential Directive; Low (Green), Guarded
(Blue), Elevated (Yellow), High (Orange) and Severe (Red). The
LiteStak is suitable for use in industrial, commercial and
municipal environments.
Each light module produces 360 degrees of light dispersion.
Optical cross-hatching ensures a lens-filling distribution of light
that is free of “hot spots”. Each module of the LiteStak can be set
up for either steady burning or flashing operation (with relays,
flashers or PLCs). The lens of each module snaps on for quick
and easy lamp maintenance.
Lamps choices include a rugged 25-watt incandescent bulb or a
lifetime guaranteed 100,000 hour LED lamp. The LiteStak can be
installed easily in a surface mount or a 3/4” NPT pipe mount
configuration. The choice of operating voltages includes 24VDC
and120VAC for incandescent models and 24VDC and 120VAC for
LED models.

Model

Voltage

Operating
Current

Mount

LSHLS

24VDC

760 mA

Pipe/Surface

LSHLS

120VAC

230 mA

Pipe/Surface

LSHLS-LED

24VDC

80 mA

Pipe/Surface

LSHLS-LED

120VAC

40 mA

Pipe/Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:56 PM

Page 23

HOMELAND SECURITY STATUS INDICATOR (LSHLS)
4"/101.6 mm
Top Cap

Easy to install
snap rivets

Litestak® Height

1

2

3

A

C

1

2

3

Litestak™
Light Module
(model LSL)

B

Spring Design
Contacts Resist
Vibration

1

2

3

A

C

2
1

Snap-Apart
Polycarbonate Lens
Halves

B

3.25"/
82.6 mm

3

19.35"/
491.5 mm

100,000 Hour
LED Lamp

Base Unit
(model LSB)
3.93"/99.8 mm
Drawing illustrates base unit and one light module.

S P E C I F I C AT I O N S
Lamp Life, Incandescent*:
Lamp Life, L.E.D*:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
7,000 Hours
100,000 Hours
32°F to 120°F
3.0 lbs.
4.8 lbs.
19.35"
3.93"

7,000 Hours
100,000 Hours
0°C to 49°C
1.4 kg
2.2 kg
491.5 mm
99.8 mm

• Specify model, voltage and lamp
style (incandescent or LED)
• Please refer to Model Number Index
LSL/LSB beginning on page 372

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens Kit, Amber
Lens Kit, Blue
Lens Kit, Green
Lens Kit, Orange
Lens Kit, Red
Snap Rivets, 25 pieces
Cap Kit-Snap Rivets included

Part Number
K8447014A-02
K8447014A-04
K8447014A-01
K8447014A-08
K8447014A-03
K7099A112A-01
K8447009E

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Incandescent Lamp, 24VDC
Incandescent Lamp, 120VAC
LED Lamp, Amber
LED Lamp, Blue
LED Lamp, Green
LED Lamp, Orange
LED Lamp, Red

Fax: 708.534.4852

K8107210A
K8107194A
LED-024ASB
LED-024BSB
LED-024GSB
LED-024ASB
LED-024RSB

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:51 PM

Page 20

FEDERAL SIGNAL CORPORATION

Litestak ®
Status Indicator
with LED Lamp
Model LSLD

LONG LIFE LIGHT SOURCE
•

Available in 24VDC and 120VAC

•

Five lens colors

•

100,000 hour, vibration-resistant
LED lamp

•

Surface mount and integrated
3
/4 - inch pipe mount

•

Indoor use only

•

Type 1 enclosure

•

UL and cUL Listed and
CSA Certified

Federal Signal’s Litestak® status indicators are vertical columns of
light that indicate the status of a machine’s operating process in a
full 360° radius.
The Litestak Model LSLD modular indicator light system allows
the user to combine up to five interchangeable lamp units with
a base power unit. Modules are sold separately for a truly
customized indicator.
Light modules come complete with a 100,000-hour LED lamp;
LED light output coordinates with the module’s impact-resistant
polycarbonate lensing. LED lamps consume less power, operate at
a lower temperature, and are remarkably resistant to vibration —
which makes them perfect for use in heavy-duty, high
vibration applications.
LED lamps are available in five colors — amber, blue, clear, green
or red. The standard double-contact bayonet base retrofits into
any Federal Signal Litestak unit to replace original incandescent lamps.
An optional Sound Module (Models LSS or LSH) can be added to
the top of the Litestak column to create a dual purpose
audible/visual status indicating signal. The LSS sound module
allows the user to select from 32 tones via a simple dip switch
panel. In applications where a single loud tone is all that is
necessary, the LSH piezo-electric horn is a perfect audible addition.
Litestak is a versatile system that allows the user to select either
steady burn or flash. A flasher is included on the 120VAC LSB unit
only but can be purchased separately for 24VDC models. The
Litestak base unit can be either surface mount, or 3/4" pipe mount.

Model

Voltage

Operating
Current

LSB

3

24-240VAC/DC

LSB

3

WA

RRANT

Y

N/A

3

120VAC 50/60Hz

N/A

1

3

/4" Pipe/Surface
/4" Pipe/Surface

24-240VAC/DC

N/A

Surface

LSLD2

24VDC

80 mA

N/A1

LSLD2

120VAC 50/60Hz

45 mA

N/A1

LSBS

5 yyr

Mount

1

3

1

Not Applicable

2

Includes lens, lamp and light module.

3

Cap kit included.

1

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:55 PM

Page 21

LITESTAK ® WITH LED LAMP (LSLD)
4"/101.6 mm

2

B

Top Cap

Easy to install
snap rivets

1

2

3

A

C

1

B

Spring Design
Contacts
Resist Vibration

1

2

3

A

C

1

2

3

Litestak™
Light Module
(Model LSLD)
B

A

3

Mounting Options

3.25"/82.5 mm

290A

Snap-apart
Polycarbonate
Lens Halves
B

A

C

19.35"

2

Litestak® Heights

3

B) LSB Base

1

A) LSBS Low Profile Base

1

2

3

16.3"
Polycarbonate
Base Unit
(Model LSB)

13.05"
9.8"

100,000 Hour LED
Lamp

6.55"
3.93"/99.8 mm

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight, LSLD:
Shipping Weight, LSLD:
LSLD Height:
LSB Height:
LSLD Diameter:
LSB Diameter:

HOW TO ORDER
100,000 Hours
LED
0°F to 120°F
0.45 lbs.
0.7 lbs.
3.25"
3.3"
3.93"
3.93"

100,000 Hours
LED
-18°C to 49°C
0.2 kg
0.32 kg
82.5 mm
83.8 mm
99.82 mm
99.82 mm

* Optimal hours under ideal conditions.

• Light modules and base modules are
ordered separately
• Specify model, voltage and color of
light modules
• Specify model and voltage of base
unit
• Specify optional sound module
(page 24 & 26)
• Please refer to Model Number Index
LSLD beginning on page 372

R E P L A C E M E N T PA RT S
Description
Lens Kit, Amber
Lens Kit, Blue
Lens Kit, Clear
Lens Kit, Green
Lens Kit, Red
Lens Kit, Black-out (1/2 lens)
Flasher, 24VDC
Flasher, 120VAC
Cap Kit-Snap Rivets included
Snap Rivets, 25 pieces

Part Number
K8447014A-02
K8447014A-04
K8447014A-05
K8447014A-01
K8447014A-03
K8447014A-06
K8285237A
K8285239A
K8447009E
K7099A112A-01

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

LED Lamp, Amber, 24VDC
LED Lamp, Blue, 24VDC
LED Lamp, Clear, 24VDC
LED Lamp, Green, 24VDC
LED Lamp, Red, 24VDC
LED Lamp, Amber, 120VAC
LED Lamp, Blue, 120VAC
LED Lamp, Clear, 120VAC
LED Lamp, Green, 120VAC
LED Lamp, Red, 120VAC
Fax: 708.534.4852

LED-024ASB
LED-024BSB
LED-024CSB
LED-024GSB
LED-024RSB
LED-120ASB
LED-120BSB
LED-120CSB
LED-120GSB
LED-120RSB

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:55 PM

Page 24

FEDERAL SIGNAL CORPORATION

Litestak ®
Sound Module
Model LSS

ADD SOUND TO A FEDERAL
SIGNAL LITESTAK®
•

Available in 24VDC and 120VAC

•

Modular unit fits on top of any
Litestak® configuration

•

Select one of 18 tones

•

Capable of outputs between
59-69dB @ 10' (69-79dB @ 1m)

•

Indoor use only

•

Type 1 enclosure

•

UL Listed and CSA Certified

The Federal Signal Litestak® Sound Module is a microprocessorbased audible signaling device. The model LSS can be used as a
stand-alone audible device or combined with the Federal Signal
Litestak light modules to create an audible/visual signal.
The sound module contains a microprocessor-based tone generator
and an integrated speaker which produces one of 18 tones. Select
tones by setting five, 2-position DIP-switches. The sound module
can work as a stand-alone audible signal when plugged into the
Model LSBS Low Profile Surface Mount Base or Model LSB Pipe
Mount Base.
The Model LSS can be combined with any Litestak light module
configuration of up to four colors. Controlling the sound module
is done via the wires normally used for the clear light module. The
sound module always occupies the top module position in a
Litestak tower.
Ideal applications for the LSS include environments where the
ambient noise is not extreme – assembly lines, conveyor systems,
automated lines, instrument panels and workshops.
LSS is UL Listed and CSA Certified.
Federal Signal’s Litestak Sound Module allows the user to add a
distinctive audible signal to a Litestak Status Indicator.

Model

Voltage

Operating
Current

dB Output

LSS

24VDC

180 mA

See Page 25

LSS

120VAC

70 mA

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:55 PM

Page 25

LITESTAK ® SOUND MODULE (LSS)
Tone
Selection
Chart

3.93"/99.8 mm

Speaker
Grille
(black)
Speaker

3.25"/82.6 mm

Five
Position
DIP switch

Cap
(Top of Unit)
Included with base

AVA I L A B L E T O N E S
Model

Name

Description

Frequency

Rep. Rate

dBA @ 10'/1m

TM1
TM2
TM3
TM4
TM5

Wail
Yelp
Hi-Lo
Bell
Yeow

Conventional Siren
Rapid Siren
Alternating High & Low
Bell, struck rapidly
Descending high to low, repeated

560-1055Hz
560-1055Hz
Low: 561Hz High: 760Hz
801Hz
Low: 545Hz High: 1295Hz

11 cycles/min.
3.3 cycles/min.
50 cycles/min.
50 cycles/min.
36 cycles/min.

68.8 / 78.8
67.6 / 77.6
68.3 / 78.3
59.0 / 69.0
67.8 / 77.8

TM6
TM7
TM8
TM9
TM10

Horn
Beep
Stutter
Slow Whoop
Gradual Horn

Steady Horn
Slow intermittent horn
Rapid intermittent horn
Slow ascending low to high, repeated
Steady horn, gradually increasing volume

470Hz
470Hz
470Hz
Low: 424Hz High: 1164Hz
514Hz

Continuous
50 cycles/min.
5 cycles/sec.
15 cycles/min.
Continuous

61.0 / 71.0
59.6 / 69.6
59.4 / 69.4
66.5 / 76.5
62.3 / 72.3

TM11
TM12
TM13
TM14
TM15

Temp. Slow Whoop
Westminster Chime
Evac./Radiation
Air Horn
Chime

NFPA1 coded slow whoop
Westminster Chime
Amplitude modulated horn
Steady horn
Single strike chime

Low: 424Hz High: 774Hz
Musical tone
479Hz
Low: 400Hz High: 800Hz
Musical tone

15 cycles/min.
1 cycle; 8 notes
4.3 cycles/sec.
Continuous
49 cycles/min.

65.2 / 75.2
63.4 / 73.4
61.7 / 71.7
66.2 / 76.2
60.6 / 70.6

TM16
TM17
TM18

Phaser
Alternating Hi-Lo
Warble

Rapid siren
Alternating High & Low
Extremely rapid siren

600-1200Hz
Low: 363Hz High: 518Hz
560-1055Hz

15 cycles/sec.
60 cycles/min.
63 cycles/sec.

63.7 / 73.7
63.8 / 73.8
67.1 / 77.1

S P E C I F I C AT I O N S
Operating Temperature:
Net Weight:
24VDC
120VAC
Shipping Weight:
24VDC
120VAC
Height:
Diameter:

HOW TO ORDER
32°F to 120°F
0.6 lbs.
0.9 lbs.
0.8 lbs.
1.1 lbs.
3.25"
3.93"

0°C to 49°C
0.3 kg
0.4 kg
0.4 kg
0.5 kg
82.6 mm
99.8 mm

• Specify model and voltage of sound
module (base required, page 18)
• Please refer to Model Number Index
LSS beginning on page 372

R E P L A C E M E N T PA RT S
Description
Grille Kit, Black
Snap Rivets, 25 pieces

Part Number
K8447014A-07
K7099A112A-01

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:22 AM

Page 110

FEDERAL SIGNAL CORPORATION

Mounting Kits
Models LWMB2 and LCMB2

Federal Signal’s Models LWMB2 and LCMB2 mounting brackets
are specifically designed for use with Federal Signal’s stationary
warning lights to provide an easy and consistent means of mounting
lights throughout a facility.

CUSTOM MOUNTING
BRACKETS

Federal Signal’s Models LWMB2 and LCMB2 are constructed of
durable cast aluminum and sealed with gray powder coat paint.
Easy to install, these units can be wired through the back of the
bracket for electrical box mounting or through the threaded hole
in the base for external 1/2-inch conduit connection. Each kit
includes a bracket, plate and mounting screws.

•

Heavy-duty construction

•

Easy installation

•

For walls and outside corners

•

Replaces unsightly and hazardous
makeshift supports

•

1

These brackets are suitable for any Type 3R application in
ordinary (non Division 1/Division 2) environments.

/2 - inch, 3/4 - inch and 1 - inch
pipe mount

•

Indoor and outdoor use

•

Type 3R

Easy installation, heavy-duty construction and a professional
appearance make the brackets suitable for use in commercial,
institution and industrial environments.

The LCMB2 and LWMB2 mounting kits may be used with the
following Federal Signal models: 121S, 131ST, 131DST, 131C,
141(120V), 141ST, 225, 371, 371L, 371ST, 371DST, AV1, AV1ST,
FB2PST and the FB24ST.

Model

Height

Width

Extension

Net
Weight

Shipping
Weight

LWMB2

6.0"

6.375"

5.875"

2.6 lbs.

2.95 lbs.

LCMB2

6.0"

5.000"

5.750"

2.3 lbs.

2.50 lbs.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:23 AM

Page 111

MOUNTING KITS (LWMB2/LCMB2)
Installation of a wall bracket on a 4" electrical box
PLASTER RING
OR ELECTRICAL BOX
INCLUDED

Installation of a wall bracket with conduit wiring
ANCHORS
(NOT SUPPLIED)

ADAPTER PLATE
INCLUDED

WALL
MACH. SCREWS

MOUNTING
BRACKET
ASSEMBLY

SET SCREWS

WALL
MOUNTING
BRACKET
BACKPLATE
INCLUDED

SHEET METAL
SCREWS

MACH. SCREWS
INCLUDED

1/2" TAPPED HOLE

CONNECTOR
1/2" CONDUIT

.028 HOLE SIZE

Installation of an outside corner bracket with conduit
WALLS
ANCHORS
(NOT SUPPLIED)

BACKPLATE
INCLUDED

.028 HOLE SIZE

MACH. SCREWS
INCLUDED

SET SCREWS
INCLUDED

1/2" TAPPED HOLE
CORNER
MOUNTING
BRACKET

CONNECTOR
1/2" CONDUIT

HOW TO ORDER
• Specify model
LCMB2 – Corner Mount
LWMB2 – Wall Mount
• Please refer to Model Number Index
LCMB2/LWMB2 beginning on
page 377
2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:47 PM

Page 14

FEDERAL SIGNAL CORPORATION

MicroStat ®
Status Indicator
Model MSL

COMPACT STATUS INDICATOR
IN WATER-TIGHT ENCLOSURE
•

MSL1, MSL2, MSL3 available in
24VAC/DC, 120VAC and 240VAC;
MSL4 and MSL5 available in
24VAC/DC and 120VAC

The Federal Signal MicroStat® is a compact, Type 4X status
indicator, Type 1 with optional sounder. Ideal for OEM applications,
the MicroStat comes pre-assembled as 1-, 2-, 3-, 4-, or 5-high
light units. The user selects combinations from five colors; amber,
blue, clear, green and red. O-rings between each segment provide
a water-tight and dust-tight seal. The MSL1, MSL2, MSL3 are
available in 24VAC/DC, 120VAC and 240VAC; the MSL4 and MSL5
are available in 24VAC/DC and 120VAC. The base of each light can
be surface or pipe mounted (3/4-inch NPT).
The lenses lock together and snap apart with a simple twisting
motion, allowing for easy lamp changes and quick lens resequencing.
A rugged vibration-resistant, thick-filament wedge lamp fills each
lens with light, providing excellent optical performance.

•

Factory assembled

•

Small footprint — only 2.2"
diameter (55.9 mm)

Wire connections are made through a 2-piece terminal block.
The MicroStat is designed to work with PLC outputs including “Triacs”.

•

Vibration-resistant 5.6W
wedge lamp

An optional 100,000-hour LED light source is available in the five
colors. This lamp, made of surface mounted LEDs, plugs directly
into the same socket as the standard lamp.

•

Surface mount and integrated
3
/4 - inch pipe mount

•

Type 4X enclosure1

•

Indoor Use only

•

Optional Sound Module, LED
Lamp, Pipe Mount Base
and Flasher

•

PLC Compatible

•

UL and cUL Listed

5 yyr
WA

RRANT

Y

An optional sound module can be installed in the top position of
any MicroStat. The Sound Module Kit (MSS) consists of a slotted
grille and board-mounted piezoelectric horn. The sounder plugs
directly into the wedge socket.
A pipe mount base, pipes and flashers are also available. See page
16 for a complete list of options.

Model

Description

Operating
Current

Voltage

MSL1

One status segment

0.2 amps

MSL1, MSL2, MSL3

MSL2

Two status segments

0.4 amps

available in 24VAC/DC

MSL3

Three status segments

0.6 amps

120VAC, 240VAC

MSL4

Four status segments

0.8 amps

MSL4, MSL5

MSL5

Five status segments

1.0 amps

available in
24VAC/DC, 120VAC

1

MSL with optional sounder rated NEMA Type 1.

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:54 PM

Page 15

MICROSTAT ® STATUS INDICATOR (MSL)

Dimensions —

18.5"/444.9 mm

Wedge-Type Lamp #655

16.5"/419.5 mm

7.8"/197.2 mm

Two Phillips-Head
Screws Connect
Sleeve to Base

12.5"/317.9 mm

Cap

Sound Module
Assembly

(Diameter: 2.2"/55.9 mm)

9.8"/248 mm

Colored Lenses
Twist On/Off and
“Click” into Place

Lamp Socket
& Cover Assembly
Terminal Block
Wiring Diagram

Sleeve
Printed Circuit Board
O-Ring Gasket
Base is
Designed for
Surface or
Pipe Mounting

5

S P E C I F I C AT I O N S
Lamp Life*:
7,000 Hours
Lamp Style:
Wedge-Type Lamp #655
Operating Temperature:
32°F to 104°F
Net Weight:
1-high
0.4 lbs.
2-high
0.55 lbs.
3-high
0.65 lbs.
4-high
0.85 lbs.
5-high
1.0 lbs.
Ship. Weight:
1-high
0.7 lbs.
2-high
0.85 lbs.
3-high
1.3 lbs.
4-high
1.5 lbs.
5-high
1.65 lbs.

4

3

2

1

N

HOW TO ORDER
7,000 Hours
0°C to 40°C
0.18 kg
0.25 kg
0.29 kg
0.39 kg
0.45 kg
0.32 kg
0.39 kg
0.59 kg
0.68 kg
0.75 kg

• Determine number of status
segments required; one for each
light segment and one for a sounder
• Specify Model MSL1, MSL2, MSL3,
MSL4, MSL5.
• Specify colors for MSL1 and MSL2
(MSL3, MSL4 and MSL5 are packaged with one each of the colored
lenses)
• Specify voltage
• Specify options (see page 16)
• Please refer to Model Number Index
MSL beginning on page 372

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Amber
Lens, Clear
Lens, Red
Lens, Blue
Lens, Green
Wedge Lamp (#655), .28V
MSLED Lamp

Part Number
K8447042A
K8447042A-02
K8447042A-04
K8447042A-01
K8447042A-03
K8107185A
Please refer to page 16

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description

Part Number

Terminal Block (3 position)
Terminal Block (4 position)
Terminal Block (6 position)
Light Barrier
Cap
O-Ring

K140373A-03
K140373A-04
K140373A-06
K8447061A
K8447044A
K8447054B

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:48 PM

Page 16

FEDERAL SIGNAL CORPORATION

MicroStat ®
Status Indicator
Optional Equipment
Models MSLBRCKT, MSLED, MSP, MSS,
MSTB
A variety of optional equipment is available for the MicroStat®.

ADD THESE OPTIONS TO
YOUR MICROSTAT®

MSLBRCKT
Wall mounting the MicroStat is simple with this basic bracket.
MSLED

•

Plug-in sound module, 24VDC
and 120VAC

•

Flashers, 24VDC and 120VAC

Five plug-in LED’s are available for the MicroStat; amber, blue,
clear, green, or red. The MSLED replaces the lamp in any MSL
light module. These surface mount printed circuit board lamp
simulators represent the state of the art in LED technology.
MSLED modules are UL Listed.

•

Wall mount bracket

MSP

•

Plug-in LED's in five colors –
amber, blue, clear, green, or red

•

Pipe extensions

•

Tulip-style pipe-mount base

MSS

•

UL and cUL Listed (MSLED, MSS)

Adding sound to the MicroStat is simple with the plug-in Sound
Module. The Sound Module produces 83-85dB @ 10’. This compact
piezo device replaces the lamp in the top position of any MicroStat.
A slotted opaque lens protects the sound module circuit and permits
the sound to be heard at maximum levels. Adding the sound module
to the MicroStat changes the Type rating from 4X to Type 1.
Sound modules are available in 24VDC and 120VAC operating voltages.

Some applications require that the status indicators be raised
above the machine surface. Using powder coated steel pipe
extensions helps improve the visibility of the MicroStat. Three
different lengths are available for the MicroStat. They measure
4-inches (MSP-4), 16-inches (MSP-16) and 32-inches(MSP-32).

MSTB
The MicroStat base can be pipe-mounted or surface-mounted.
When using the pipe extensions the Tulip Base is required for a
true surface mount.
FLASHERS
Flashers for the MicroStat are available in 24VDC and 120VAC.
Each flash at 75 fpm.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:49 PM

Page 17

MICROSTAT ® OPTIONAL EQUIPMENT

31.5"
80 cm

MSTB

16"
40.6 cm

4"
10.6 cm

MSS

MSLBRCKT

MSP's

S P E C I F I C AT I O N S
MSS
Operating Current:

24VDC
120VAC
dB Output:
93-95dB @ 10'
Net Weight:
0.25 lbs.
Shipping Weight:
0.75 lbs.
Height:
2.0"
Diameter:
2.2"
MSLED
Operating Current:
24VDC
120VAC
Net Weight:
0.05 lbs.
Shipping Weight:
0.55 lbs.
Height:
1.75"
Width:
1.5"

0.03 amps
0.04 amps
83-85 @ 1m
0.11 kg
0.34 kg
50.8 mm
55.9 mm
0.095 amps
0.095 amps
0.02 kg
0.25 kg
44.45 mm
38.1 mm

R E P L A C E M E N T PA RT S
Description
LED Lamp, Amber
LED Lamp, Blue
LED Lamp, Clear
LED Lamp, Green
LED Lamp, Red

MSLBRCKT
Net Weight:
Shipping Weight:
Height:
Width:
MSTB
Net Weight:
Shipping Weight:
Height:
Diameter:
FLASHERS
Flasher, 24VDC
Flasher, 120VAC

0.4 lbs.
0.9 lbs.
3.45"
2.0"

0.18 kg
0.41 kg
87.63 mm
50.8 mm

0.3 lbs.
0.8 lbs.
1.5"
2.75"

0.14 kg
0.36 kg
38.1 mm
1.25 mm
K8285237A
K8285239A

HOW TO ORDER
Part Number
MSLED-A
MSLED-B
MSLED-C
MSLED-G
MSLED-R

•
•
•
•

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Specify model
Specify voltage for sound modules and flashers
Specify color for LED lamps
Please refer to Model Number Index Microstat
Options beginning on page 372

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:42 PM

Page 8

FEDERAL SIGNAL CORPORATION

SemiStat ®
Status Indicator
Models SCB and SCC

OEM STATUS INDICATOR
•

Available in 24VAC/VDC

•

Tri or quad-color models

•

Available in chrome or white finish

•

100,000 hour vibration resistant
LED lamps

•

Integrated sounder

•

Surface mount

•

Indoor use only

Federal Signal introduces the SemiStat® Status Indicator. Designed
to meet the needs of the OEM market, the SemiStat is an attractive,
easy-to-install and economical status indicator.
SemiStats operate on 24VAC or 24VDC. The snap fit housing
cover and a standard terminal block make the installation and
wiring of the SemiStat a quick job.
The attractive and durable ABS housing is available with either a
white or “chrome” finish to complement the machine or location
of installation.
SemiStat LED light modules utilize extremely bright light emitting
diodes for the greatest attention-getting affect. Tri-Color SemiStat
features red, amber and green light modules and Quad Color
SemiStat features red, amber, green and blue light modules. Clear
LED light modules are available separately. The sequence of the
LED light modules can be easily changed to suit the application –
just pop off the housing cover, disconnect the modules and then
reconnect in the desired order. Light modules can be set to flashing or steady burning mode.
For further utility, each SemiStat is equipped with an integrated
piezo sounder. SemiStat sounders produce 60dB at ten feet. A
selection of two beep patterns is offered.

Decibels @
10'
1m

Mount

24VAC/VDC 150 mA*

60

70

Surface

24VAC/VDC 175 mA*

60

70

Surface

Model

Voltage

Tri-color
Quad color

Operating
Current

* Amp draw measured with all colors and sounder activated simultaneously.

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:42 PM

Page 9

SEMISTAT ® STATUS INDICATOR (SCB/SCC)

Printed Circuit Board

LED Modules

Cover

Volume Control
Piezo Sounder

S P E C I F I C AT I O N S
Lamp Style:
Lamp Life:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Width:
Depth:

HOW TO ORDER
LED Lamp
100,000 hours
32°F to 140°F
0.7 lbs.
1.0 lbs.
8.14"
3.55"
1.55"

LED Lamp
100,000 hours
0°C to 60°C
0.32 kg
0.45 kg
207.0 mm
90.0 mm
39.0 mm

• Specify model and tri- or quad color
• Specify finish
White/Beige (B) or Chrome (C)
• Please refer to Model Number Index
SCB/SCC beginning on page 372

R E P L A C E M E N T PA RT S
Description
PCB Assembly
LED Module, Amber
LED Module, Blue

Part Number
K2001958A
K2001925A-01
K2001925A-02

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Description
LED Module, Red
LED Module, Green
LED Module, Clear

Fax: 708.534.4852

Part Number
K2001925A
K2001925A-03
K2001925A-04

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

FEDERAL SIGNAL CORPORATION

Synchronous
Strobe Module
Model SSM

SYNCHRONIZE LOW IN-RUSH
FEDERAL SIGNAL STROBES
•

Synchronizes strobe lights to
72 flashes per minute

•

Mounts on double-gang
electrical box

•

UL1971 Approved for hearing
impaired applications

•

Polarized design allows for
remote supervision

•

Compatible with select Federal
Signal model strobe lights
(see chart)

The Model SSM, Synchronous Strobe Module, is an electronic
timing mechanism designed to energize select Federal Signal low
in-rush 24VDC strobe lights simultaneously, while maintaining the
ability to remotely supervise the strobe light circuit. This module
is designed to synchronize a special series of Federal Signal
strobe lights, which meet the requirement for Private-Mode Fire
Alarm use, while maintaining the agency approval and environmental rating of the strobe light. The SSM is only compatible with
Federal Signal brand strobe lights. See compatible models on the
“How to Order” page.
The SSM enables the customer to meet local building codes
through a visually appealing “single-flash” created by the simultaneous control of strobe lights connected to it. Mixed signals are
reduced to a minimum as reflection of many light pulses are now
viewed as one single flash.
The SSM mounts to the plaster ring of a double-gang electrical
box, and requires 24 VDC at all times to operate the timing circuit.
Screw terminals are provided for field termination of control
wiring and a maximum of three non-Explosion-proof strobe lights
or two Explosion-proof strobe lights may be connected to each
SSM. Electrically, the SSM should be mounted in the middle of
the circuit, with a maximum cable distance of 100’ from the SSM
to each Strobe light. Supervision is accomplished the same as
without the SSM, with a flash rate of 72 Flashes per minute in lieu
of the advertised flash rate for each strobe light. The SSM is
capable of switching 6 Amps of current. Please note: Not all
strobe lights have the same in-rush current and therefore the
SSM’s circuit’s switching potential may be reduced. Please see the
application drawings on the second page.

Model

Operating
Current

Voltage

SSM

0.95 amps

24VDC

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

VISUAL

SYNCHRONOUS STROBE MODULE (SSM)

CONTROL PANEL
OR
POWER SUPPLY

+
+ IN
–
24VDC
OUT

+ OUT +IN
– OUT
– IN

– IN

+ OUT +IN
– OUT

– IN

+ OUT
– OUT
END OF
LINE
RESISTOR

SYNC MODULE SSM

290A5130

FSEX–HI
STROBE #1

24VDC
IN –

+
–
24VDC
OUT

+IN

RED +

–

FSEX–HI
STROBE #2

BLACK–

STROBE
SIGNAL +

RED +

+

CONTROL PANEL
OR
POWER SUPPLY

BLACK –

RED +

BLACK –

RED +

STROBE
SIGNAL +
24VDC
IN –

FB24STHI
OR
224XSTHI
STROBE #3

+OUT
–IN

BLACK–

–

RED +

+

FB24STHI
OR
224XSTHI
STROBE #2

BLACK –

FB24STHI
OR
224XSTHI
STROBE #1

+ OUT

+IN

–OUT

–IN

–OUT
END OF
LINE
RESISTOR

SYNC MODULE SSM

2

S P E C I F I C AT I O N S
Operating Temperature:
Net Weight:
Ship. Weight:
Height:
Width:
Depth:

HOW TO ORDER
32°F to 120°F
0.53 lbs.
0.93 lbs.
4.5”
4.5”
1.12”

C O M P AT I B L E S T R O B E L I G H T S
224XST-024, Series C
225XST-I-024, Series B
FB2PSTX-I-024, Series B
FB2PST-I-024, Series B
FB24ST-024, Series B
FB24ST-HI-024, Series C
224XST-HI-024, Series B
FSEX-HI-024, Series D
FSEX-024, Series D
27XST-024, Series E

0°C to 49°C
0.24 kg
0.42 kg
114.3 mm
114.3 mm
28.4 mm

• Specify model

3 per circuit
3 per circuit
3 per circuit
3 per circuit
3 per circuit
3 per circuit
3 per circuit
2 per circuit
2 per circuit
2 per circuit

R E P L A C E M E N T PA RT S
Description
PC Board Assembly

Part Number
K2001933A

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:43 PM

Page 10

FEDERAL SIGNAL CORPORATION

UniStat™
Status Indicator
Model USI and USIS

The UniStat™ is an LED (light emitting diode) based, multi-color,
single-high status indicator.

MULTICOLOR LED TYPE
4X STATUS INDICATOR

Using the latest die level LED technology, this unique status indicator
can produce three colors (Amber, Green and Red) or four colors
(amber, blue, green and red) from a single light source.

•

Available in 24VAC/DC and 120VAC

Ideal for OEM applications, the UniStat is compact, attractive, and
easy to install. The low profile UniStat produces as much light as
its much larger competitors.

•

Tri or quad-color models

•

100,000 hour, vibration-resistant
LED light source

•

Models available with
built-in sounder

•

Surface mount and integrated
3
/4 - inch pipe mount

•

PLC compatible

•

Indoor use only

•

Type 4X, IP66 enclosure

•

Type 1 with sounder

•

UL and cUL Listed

5
WA

yyr

RRANT

The UniStat offers a choice of four integrated flash patterns –
steady-burn, slow flash, strobe flash and SimuStrobe™.
SimuStrobe simulates the attention-getting flash rate of a strobe
light but with a much more color-rich output. The user can
choose a total of 12 possible flash/color combinations in the
tri-color models and 16 in the quad-color models.
When the application calls for an increased sense of urgency,
specify the model USIS with an integrated piezo sounder.
Producing 60dB @ 10 feet, the USIS is the ideal attention getter in
process control applications.
Like the multi-level, multi-color, multi-lamp Microstat™, the
UniStat is rated Type 4X (models with sounder are rated Type1).
Each model arrives pre-assembled and ready to surface mount or
3
/4-inch pipe mount. Options for the UniStat include pipe mount
extensions (4",16", & 32"), a wall mount bracket and a tulip mount
base (see page 16).

Model

Description

Voltage

Operating
Current

USI/USIS-024TC

Tri-color

24VAC/DC

100 mA*

3

/4" Pipe or Surface

USI/USIS-120TC

Tri-color

120VAC

60 mA*

3

/4" Pipe or Surface

USI/USIS-024QC

Quad-color

24VAC/DC

100 mA*

3

/4" Pipe or Surface

USI/USIS-120QC

Quad-color

120VAC

60 mA*

3

/4" Pipe or Surface

Mount

* Sounder draws 100 mA on all models

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

7:54 PM

Page 11

UNISTAT™ WITH LED LAMP (USI/USIS)
Clear Lens Twist On/Off and
“Click” into Place

Cap

2.2"
55.89 mm

LED Light Source

Two Phillips-Head
Screws Connect
Sleeve to Base

7.8"
197.2 mm

Sleeve

“O”-Ring Gasket
Base is
Designed for
Surface or
Pipe Mounting
Sleeve of USIS features sound vents not pictured here.

S P E C I F I C AT I O N S
Lamp Life*:
Light Source:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
100,000 Hours
LED
32°F to 104°F
0.4 lbs.
0.7 lbs.
7.8"
2.2"

100,000 Hours
LED
0°C to 40°C
0.18 kg
0.32 kg
197.2 mm
55.9 mm

• Specify model number, voltage and
tri-color or quad-color
• Specify optional sounder
• Specify options from page 16
• Please refer to Model Number Index
USI/USIS beginning on page 372

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Clear
Cap, Clear
O-Ring
LED Array, Tricolor
LED Array, Quad Color
PCB, USI 24VDC
PCB, USI 120VAC
PCB, USIS 24VDC
PCB, USIS 120VAC

Part Number
K8447042A-02
K8447044A
K8447054B
K2005328A
K2005328A-01
K2005347A
K2005347A-02
K2005347A-01
K2005347A-03

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:45 PM

Page 12

FEDERAL SIGNAL CORPORATION

Hazardous Location
UniStat™ Status
Indicator
Model USIX

The UniStat™ is an LED (light emitting diode) based, multi-color,
single-high status indicator.

MULTICOLOR LED
STATUS INDICATOR FOR
HAZARDOUS AREAS
•

Available in 24VAC/DC and 120VAC

•

Tri or quad-color models

•

100,000 hour, vibration-resistant
LED light source

•

Surface mount

•

PLC compatible

•

Type 4X, IP66 enclosure

•

UL and cUL Listed

Using the latest die level LED technology, this unique status indicator
can produce three colors (Amber, Green and Red) or four
colors (Amber, Blue, Green and Red) from a single light source.
The UniStat offers a choice of four integrated flash patterns –
steady-burn, slow flash, strobe flash and SimuStrobe™.
SimuStrobe simulates the attention-getting flash rate of a strobe
light but with a much more color-rich output. The user can choose
a total of 12 possible flash/color combinations in the tri-color
models and 16 in the quad-color models.
The USIX is protected in a durable polycarbonate housing utilizing
four 3⁄4 inch knockout conduit openings in the surface mount base.
The outer glass globe is protected by a polycarbonate dome
guard(included). Each model arrives pre-assembled and ready to
surface mount.
The USIX has been designed for use in Class I, Division 2, Groups
A, B, C, D; Class II, Division 2, Groups F and G; and Class III. The
USIX is suitable for use in Type 4X applications.

Model

Description

Voltage

Operating
Current

Mount

USIX-024TC

Tri-color

24VAC/DC

0.087 amps

Surface

USIX-120TC

Tri-color

120VAC

0.058 amps

Surface

USIX-024QC

Quad-color

24VAC/DC

0.087 amps

Surface

USIX-120QC

Quad-color

120VAC

0.058 amps

Surface

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/26/08

6:46 PM

Page 13

HAZARDOUS LOCATION UNISTAT™ (USIX)

Clear Glass
Dome

11.07"/
28.11 cm

Guard
5.19"/
13.18 cm

Base
Gasket
Ceiling Box

4.75"/
12.06 cm

4X 3/4" NPT
5.94"/
15.08 cm

0.33"
2X2X0.33

S P E C I F I C AT I O N S
Lamp Life*:
Light Source:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Diameter:

HOW TO ORDER
100,000 Hours
LED
-40°F to 150°F
2.49 lbs.
2.53 lbs.
11.07"
4.75"

100,000 Hours
LED
-40°C to 66°C
1.13 kg
1.15 kg
28.11 cm
12.06 cm

• Specify model number, voltage and
tri-color
• Please refer to Model Number Index
USIX beginning on page 372

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description
Lens, Clear
Cap, Clear
O-Ring
Clear Glass Globe
Polycarbonate Globe
Plastic Guard
PCB, USIX 24VAC/DC
PCB, USIX 120VAC
LED Array, TC
LED Array, QC

Part Number
K8447042A-02
K8447044A
K8447054B
Call Factory
Call Factory
Call Factory
K2005347A
K2005347A-02
K2005328A
K2005328A-01

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

2/7/08

3:21 PM

Page 68

FEDERAL SIGNAL CORPORATION

Visalert ®
Strobe Light
Model VALS

STROBE WARNING LIGHT
•

Available in 12VDC and 24VDC,
120VAC and 240VAC

•

Five lens colors

•

4,000 hour strobe tube

•

Flush or surface mounts on Federal
Signal audible signaling devices or
control panel

•

Indoor use only

•

Type 3R, IP44 enclosure

•

UL Listed and CSA Certified

Federal Signal’s Visalert® is a three dimensional, triangular warning
light designed to be mated with Federal Signal’s Model 350
Vibratone® horn and the Model 50GC SelecTone® speaker/amplifier.
The Model VALS can also be used as a stand alone device.
Visalert is available in five lens colors: amber, blue, clear, green
and red.
Knockouts on the 50GC and the 350 audible devices ensure easy
installation. The units can be either independently or simultaneously
wired with the audible device. Model VALS uses a linear strobe
tube and all the circuitry is contained within the lens.
Visalert units are recommended for use in industrial applications
and situations where effective visual warning is needed. The
Visalert can be flush or surface mounted on the Model 350 horn
or Model 50GC speaker/amplifier.
Federal Signal’s Visalert strobe light is an affordable, low-maintenance
strobe light in a compact size that is perfect for control panel applications.

Model

Voltage

Operating
Current

Flash Rate/
Minute

Candela
Peak1

Mount

VALS

12VDC

0.18 amps

80

108,000

Surface

VALS

24VDC

0.08 amps

80

108,000

Surface

VALS

120VAC 50/60HZ

0.06 amps

80

108,000

Surface

VALS

240VAC 50/60HZ

0.03 amps

80

108,000

Surface

1

Peak candela is the maximum light intensity generated by a flashing light during its light pulse

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

5:04 AM

Page 69

VISALERT ® STROBE LIGHT (VALS)

Surface-Mounted Light
BCL Plate

NB Box

Surface-Mounted 50GC Speaker

Knock-Out
Hole for
Light Leads

S P E C I F I C AT I O N S
Lamp Life*:
Lamp Style:
Operating Temperature:
Net Weight:
Shipping Weight:
Height:
Width:
Depth:

HOW TO ORDER
4,000 Hours
Strobe
-31°F to 150°F
0.1 lbs.
0.25 lbs.
3.95"
3.94"
1.6

4,000 hours
Strobe
-35°C to 66°C
0.057 kg
0.113 kg
100.3 mm
100.0 mm
40.6 mm

• Specify model, voltage and color
• Specify options:
Electrical Box (NB)
Mounting Plate (BCL)
Speaker (50GC, page 174)
• Please refer to Model Number Index
VALS beginning on page 375

* Optimal hours under ideal conditions.

R E P L A C E M E N T PA RT S
Description

Part Number

Description

Part Number

Lens, Amber
Lens, Blue
Lens, Clear

K8435D539A
K8435D539A-08
K8435D539A-02

Lens, Green
Lens, Red
Strobe Tube
Gasket

K8435D539A-03
K8435D539A-07
K149128A
K8435A225

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:24 AM

Page 112

FEDERAL SIGNAL CORPORATION

Vehicular Light Bar
Model VLB

The Highlighter Strobe is designed for those who prefer the look
of the traditional halogen light bar, but require strobe technology.

MINI LIGHTBAR
•

Modular system

•

360 degree light distribution

•

Quad flash, 9 joule output

•

Magnet mount or
permanent mount

•

Low current draw

•

Weather resistant housing

•

Meets, SAE J1318 Class II

The Highlighter Strobe features 2 strobe heads and an integrated
microprocessor controlled power supply that produces an
alternating quad flash of 9-joules per head. The alternating
flash tubes are positioned under onmi-directional Fresnel lens
for maximum lens fill and off-axis visibility.
All Highlighter Strobe models meet SAE J1318
Class 2 requirements.
Mounting options include permanent mount or the flexibility
of a suction cup/magnetic mounting. Magnetic mount unit come
equipped with a cigarette lighter power plug with an integrated
ON/OFF switch for easy operational control. Permanent mounting
can be achieve with any of the available mounting kits1;
FMK – Flat Mounting Kit, RMK – Riser Mounting Kit.

1

Permanent mounting requires one of the available mounting kits for installation

Model

Operating
Voltage

Operating
Current

Mounting
Configuration

VLB-012AP

12VDC

3.6 amps @ 12.8VDC

Permanent

VLB-012AM

12VDC

3.6 amps @ 12.8VDC

Magnetic

5 yyr
WA

RRANT

Y

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:54 AM

Page 113

VEHICULAR LIGHT BAR (VLB)

Dome
12.75"
12.13"

.81"

(A)
4"
1/2" Dia.
Wire Exit Hole

(B)

Baseplate
Assembly

12"

(A) Drill 0.20" Dia. holes (4) for top mounting or drill 0.28" Dia. holes (4)
for bottom mounting
(B) Drill 0.38" Dia. holes (2) for center mounting only

S P E C I F I C AT I O N S
Shipping Weight:
Permanent
Magnetic
Height:
Permanent
Magnetic
Width:
Length:

HOW TO ORDER
5.0 lbs.
5.0 lbs.

2.3 kg
2.3 kg

5.0”
5.0”
9.0”
15.0”

127.0 mm
127.0 mm
229.0 mm
381.0 mm

• Specify model, mounting, color
and voltage
• Select option mounting bracket for
Permanent Mounting;
FMK – Flat mount kit
RMK – Riser mount kit
• Please refer to Model Number
Index VLB beginning on page 377

R E P L A C E M E N T PA RT S
Description
Strobe tube assembly with connector
Power supply assembly
Clear internal lens
Outer dome, Amber

Part Number
KZ8560082A
KZ8560081A
K208669
K452510-02

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/31/08

2:55 AM

Page 114

FEDERAL SIGNAL CORPORATION

Hazardous Location
GRP Strobe Light
Model WV450XD and WV450XE

GLASS REINFORCED
POLYESTER DESIGN FOR LOW
MAINTENANCE AND
CORROSION RESISTANCE
•

Available in 24-48VDC, 110VAC,
220-248VAC

•

Available in 5, 10 and 15
Joule Units

•

Seven available lens colors: red,
amber, yellow, blue, green, clear
and magenta

•

316 Stainless steel mounting
bracket included

•

Toughened, impact resistant dome

•

IP66

•

Corrosion free GRP (glass
reinforced polyester)

•

Included dome guard

•

Two M20 entries standard

•

Zone rated, IECEx

The Federal Signal Model WV450X Hazardous Location GRP
Strobe Light is designed to serve the needs of rugged landbased and offshore industrial applications that demand reliable,
long life operation while complying with stringent International
approval requirements.
The Federal Signal Model WV450X Hazardous Location GRP
Strobe Light utilizes the latest technology in non-metallic housing
construction. The housing of the WV450X is comprised entirely
of Glass Reinforced Polyester (GRP) which makes the product
corrosion free and lighter than a comparable metallic fixture. The
fact that the WV450X is corrosion free also makes the product
safer, and “maintenance-free” by eliminating the need to regularly
inspect the flame path. An electro-polished stainless steel dome
guard is also provided for protection of the glass lens in the event
of accidental impact.
Two versions of the WV450X are available. The “D” version of the
product (WV450XD) comes standard with a stainless steel mounting
bracket for wall mounting or fastening to a vertical surface. Two
holes are tapped for M20 thread in the bottom of the product
allowing for field gland connection. The “E” version of the product
(WV450XE) includes the same features as the WV450XD, but
incorporates a terminal chamber with three M20 tapped holes on
the very bottom of the fixture. This terminal chamber is designed
to house field terminations and through going power supplies.
The WV450X is available in seven standard colors and three voltage
ranges to satisfy most applications. There are also three different
Joule output ratings available for each model and each voltage
range, providing the ability to tailor the light output and current
draw for a given area. The WV450X is ATEX, IECEx approved,
making it ideal for applications that require International third
party safety standards.

ATEX EExd IIB + H2 T4 + T3
Model

5
WA

yyr

RRANT

Y

WV450

Operating
Voltage

Max Operating
Current

Temperature Flash
Code
Rate

Lamp
Life*

24-48VDC
110VAC
220-248VAC

0.94/0.48 A @ 24-48VDC
0.57 A @ 110VAC 50/60Hz
0.30 A @ 220-248VAC 50/60Hz

T4
T3
T3

10,000 hrs
10,000 hrs
10,000 hrs

60
60
60

* Optimal Hours under ideal conditions

Courtesy of Steven
Inc.-230
P/NEngineering,
259195 Rev
B Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

007_122_62362_FedSig.qxd

1/27/08

7:45 AM

Page 115

HAZARDOUS GRP STROBE (WV450XD/WV450XE)
WV450XD

WV450XE

Guard

11.41"/
289.7 mm

1.63"/
41.3 mm

Lens Cover Assembly
Grub Screw

13.67"/
170.7 mm

1.63"/
41.3 mm

2.5"/
63.5 mm

2.26"/
57.4 mm

Cover Screws

2.25"/
57.2 mm

3.82"/
97.1 mm

4.46”/
113.3 mm

S P E C I F I C AT I O N S
Operating Temperatures:
“d” version without terminal chamber
ATEX -55˚C to 55˚C (-67˚F to 131˚F)
IECEx -20˚C to 55˚C (-4˚F to 131˚F)
“e” version with terminal chamber
ATEX -20˚C to 55˚C (-22˚F to 131˚F)
IECEx -20˚C to 55˚C (-4˚F to 131˚F)
WV450XD
NET Weight:
7.1 lbs.
3.23 kg
Shipping Weight:
8.6 lbs.
3.88 kg
Height:
11.41”
289.7 mm
Diameter:
4.46”
113.3 mm
WV450XE
NET Weight:
Shipping Weight:
Height:
Diameter:
Certificate Number:

8.6 lbs.
10.0 lbs.
13.67”
3.82”

3.9 kg
4.54 kg
170.7 mm
97.1 mm

IECEx UL
06 UL DEMKO ATEX

06.0010X
0425693X

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756

HOW TO ORDER
• Specify Model Number
• Specify Construction Series,
“D” or “E”
• Specify Joule Output
• Specify Voltage Range
• Specify Lens Color
• Please contact factory for
model selection

Fax: 708.534.4852

www.federalsignal-indust.com

Courtesy of Steven
Inc.-230
P/NEngineering,
259195 Rev
B Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseOutlines
Signing Date                    : 2008:03:19 17:37:22-07:00
Signing Authority               : ARE Acrobat Product v8.0 P23 0002337
Document Usage Rights           : FullSave
Annotation Usage Rights         : Create, Delete, Modify, Copy, Import, Export
Form Usage Rights               : Add, FillIn, Delete, SubmitStandalone
Signature Usage Rights          : Modify
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2008:03:19 17:37:28-07:00
Create Date                     : 2008:03:19 17:04:01-07:00
Metadata Date                   : 2008:03:19 17:37:28-07:00
Format                          : application/pdf
Title                           : Federal Signal PDF Index
Creator                         : 
Subject                         : federal signal led pioneer red aviation hazardous
Document ID                     : uuid:cbbee564-fe49-4e11-85ef-61005def4fc2
Instance ID                     : uuid:652a9c71-2213-4110-9840-7fcfd8fc1f40
Producer                        : Acrobat Web Capture 7.0
Keywords                        : federal signal led pioneer red aviation hazardous
Has XFA                         : No
Page Count                      : 116
Page Layout                     : SinglePage
EXIF Metadata provided by EXIF.tools

Navigation menu