DWZ100B Installation Directions

303970-Installation 303970-Installation 303970-Installation 786261 Batch4 unilog cesco-content

2014-06-03

: Pdf 303970-Installationsheet 303970-InstallationSheet 786261 Batch4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 8

DownloadDWZ100B Installation Directions
Open PDF In BrowserView PDF
14

26°

30°
HAWAII

18°

CALIFORNIA

NEVADA

UTAH

ARIZONA

IDAHO

MEXICO

NEW MEXICO

COLORADO

WYOMING

MONTANA

TEXAS

OKLAHOMA

KANSAS

NEBRASKA

SOUTH DAKOTA

NORTH DAKOTA

LOUISIANA

MISS

ARKANSAS

ALABAMA

TENNESSEE

KENTUCKY

ILLINOIS

IND

MICHIGAN
WISCONSIN

MISSOURI

IOWA

MINN

NORTH CAROLINA

VIRGINIA

WEST
VIRGINIA

PENNSYLVANIA

FLORIDA

GEORGIA

SOUTH
CAROLINA

OHIO

NH

RHODE ISLAND

MAINE

NEW JERSEY

CONNECTICUT

MASS

PUERTO
RICO

18°

DELAWARE
MARYLAND

NEW YORK

VT

12:20 AM

34°

38°

40°

OREGON

WASHINGTON

3/18/07

42°

45°

ASTRONOMIC LATITUDE ZONES

TORK®

DWZ100B
Page 1

DWZ100B

3/18/07

12:20 AM

Page 3

TABLE OF CONTENTS

Installation Instructions . . . . . . . . . . . . .

2

Instructions for Setting the Unit . . . . . . .

3

1.0

To Set The Clock . . . . . . . . . . . . . . . . . .

4

1.1

To Modify Clock . . . . . . . . . . . . . . . . . .

4

2.0

To Set Date . . . . . . . . . . . . . . . . . . . . . .

4

2.1

To Modify Date . . . . . . . . . . . . . . . . . . .

4

3.0

Daylight Saving Time . . . . . . . . . . . . . .

4

4.0

Holiday Dates . . . . . . . . . . . . . . . . . . . .

5

5.0

Scheduling ONs, OFFs . . . . . . . . . . . . .

6

6.0

To Set Astronomic . . . . . . . . . . . . . . . .

7

6.2

Astronomic ON, Time OFF . . . . . . . . . .

8

6.3

Time ON with Astronomic OFF . . . . . .

8

Offset

1

Offset

Capabilities & Features . . . . . . . . . . . . .

Sunrise

Page

Sunset

Section

H

(After previously Set)

11

Astronomic Latitude Zones

14

.........

SA
FR
TH

Blank Schedule sheets . . . . . . . . . . . . .

WE

10

TU

Clear All Memory . . . . . . . . . . . . . . . . .

MO

9

Sch.#

9

Manual Override . . . . . . . . . . . . . . . . . .

Latitude

Review, Modify, Delete schedules . . . . .

8.0

ASTRONOMIC SCHEDULE

7.0

SU

(After previously Set)

13

DWZ100B

3/18/07

12:20 AM

Page 5

TORK MODEL DWZ100B
1 CHANNEL DIGITAL TIME SWITCH
Holiday (H)

#

CAPABILITIES & FEATURES

Date

Description

1
2
3
4
5
6

CAPABILITIES
365 Day Advance, Single Day Holiday Scheduling.
ON and OFF set points:
- Combined total for both channels – 99 per week
- Minimum setting – 1 minute
Capable of different schedules each day of the week.
Astronomic Option: For Automatic ON at sunset, OFF at
sunrise for outdoor lighting.
FEATURES
Holidays

7
8

Daylight Saving
Leap Year
Display
Manual Override

9
10
11
12

Clock Format
Look Back

13
14

Power Outage

15
16
17

1 to 24 individual dates.
Automatic (can be adjusted).
Automatic compensation.
LCD
Until the next regular scheduled ON
of OFF. Automatic operation then
resumes.
AM/PM or 24 Hour
Automatically executes the last command after power failure.
Permanent schedule retention for up
to 40 years.
Clock maintained for 4 days by
supercapacitor (no battery needed).

18
19
20
21
22
23
24

12

1

3. When attaching conduit to enclosure, exercise care to
align and support conduit in order to prevent unnecessary stress on enclosure.
4. Reinstall unit by reversing step 1 above and connect
wires according to wiring diagram on inside case
label.

GROUNDING
National Electrical Code requires that grounding must be
continuous and in proper electrical contact in all grounding conductors, metallic conduits and grounding terminals. When using metal conduits, install the proper size
approved grounding bushings. The minimum size copper
grounding conductors must be #10 AWG if the circuit
breaker or fuse is 30 or 40 amp, #12AWG if 20 amps,
and #14 AWG if 15 amp.
NOTE: Do not use top entry for wiring

FR SA SU
OFF MO TU WE TH

Disconnect power at main panel prior to installing or
servicing this time switch or the equipment connected
to it. Connect in accordance with national and local
electrical codes. Installation by a licensed electrical
contractor is recommended.

ON

INSTALLATION INSTRUCTIONS
1. Remove unit from enclosure by pushing the inside tab
(located near the outside hasp) to the right. Swing
unit to left and remove.
2. Five combination 1/2” and 3/4” knockouts are provided on this enclosure. Remove the 1/2” (inner) knockout by inserting a screwdriver in the slot provided and
pound screwdriver handle with a hammer. Remove
knock-out with pliers and smooth hole edges with file
and knife if necessary. When the 3/4” outer knockout
is required, place screwdriver in groove and pound
screwdriver handle with hammer. Remove loose
knock-out with pliers and smooth hole edges with file
or knife if necessary.

H

Page 7

Time

12:20 AM

Load Description

3/18/07

Sch.#

DWZ100B

WE SUGGEST YOU MAKE COPIES OF THE SCHEDULE SHEETS LOCATED IN BACK OF THIS BOOKLET
AND COMPLETE THEM PRIOR TO SETTING THE
UNIT.
2

11

DWZ100B

3/18/07

12:20 AM

Page 9

EVENT (in the RUN mode) key is used to update the
load status. It will execute the last scheduled event. The
display will only show the last scheduled event. If there
is no schedule programmed, the display will show: —:—
NOTES:
1.
Unit will go to RUN MODE automatically if no key
is pressed for five minutes.
2.
Unit has a look back feature. If you have just finished setting the unit and an output is to be updated, press the EVENT key. Unit will automatically
pick up the last schedule.
3.
Clear all memory. To clear all memory, while in the
RUN mode, press ENTER, display will show:

ON
OFF

Press EVENT, the display will show:

ON
OFF

Press ENTER briefly and everything in the timer
memory is wiped off including real time and date.
12HOUR will flash.
NOTE: AFTER MAKING ANY CHANGES TO THE
PROGRAM, PRESS MODE TO GO TO RUN MODE
AND THEN PRESS EVENT TO UPDATE THE LOAD
STATUS.

INSTRUCTIONS FOR SETTING THE UNIT
Connect unit to main power source prior to entering the
settings. When powering up the unit for the first time,
allow 1-2 minutes for supercap to charge and the display
will show 12 HOUR.

Press HOUR to change to 24 hour (military format) or
Press ENTER to set 12 hour (AM/PM format).
NOTES:
1. During the RUN mode, the Hour, Minutes, Seconds,
Day of week and flashing colons will be displayed.
2. Unit will not go into run mode unless the clock and
date information has been entered. In any other
mode, if no entry is made for 5 minutes, the unit will
automatically revert to the run mode.
3. Unit will display “PF” (Power Failure) in the absence of
AC power. A minimum of 8 hours is required to fully
charge the super cap.
4. When previously programmed unit comes back from
a power failure, it will “look back” and update the
schedule, executing the last scheduled event. If a signal setting was scheduled, after power failure the unit
will execute the last scheduled signal. Settings can be
manually updated by pressing the EVENT key in the
run mode.
After pressing ENTER the unit will display:

SIG1 SIG2 CLK DATE SCH

NOTE: AFTER MAKING ANY CHANGES TO THE
PROGRAM, PRESS MODE TO GO TO RUN MODE
AND THEN PRESS EVENT TO UPDATE THE LOAD
STATUS.
10

3

DWZ100B

3/18/07

12:20 AM

Page 11

1.0 TO SET THE CLOCK
Press HOUR and MIN to advance to the present
hour and mins. Check AM/PM, and press ENTER.
1.1 TO MODIFY CLOCK
Press MODE until the display shows: CLK. Press
HOUR and MIN. to modify clock and press ENTER.
2.0 TO SET DATE
If you are setting for the first time, display will show:

SIG1 SIG2 CLK DATE SCH

Press MONTH, DATE, and YEAR key to advance to
the desired month, date and year, then press
ENTER. NOTE: The day of the week will be automatically set once the date is set.
2.1 TO MODIFY DATE
Press MODE until the display shows DATE. Press
MONTH, DATE and YEAR to modify present settings and then press ENTER.
3.0 DAYLIGHT SAVING TIME
After setting or modifying the date, display will show:

NOTE: If daylight saving time (DST) is NOT
required, press MODE, display will show:

ON
OFF

to select desired days, holiday and then press
ENTER.
ASTRO OFF:
Set astronomic OFF per sections 6.0 and 6.1
7.0 REVIEW, MODIFY AND DELETE
Press MODE to advance to any of the following
MODES:
1. CLOCK MODE: Press HOUR and MIN to modify
existing settings. Press ENTER.
2. DATE MODE: Press MONTH, DATE and YEAR to
modify existing settings. Press ENTER. DAY is automatically adjusted.
3. DST Daylight Saving Time: To review press ENTER.
To modify press MONTH, DATE and DAY to change
existing setting. Press ENTER.
4. HOLIDAY MODE: Press ENTER to advance to
desired holiday. Press MONTH and DATE to modify, DEL to delete. Press ENTER.
5. SCHEDULE MODE: Press ENTER to advance to
undesired schedule. Press HOUR, MIN, EVENT to
modify time settings. Press SELCT and DAY to
modify days, holiday, DEL to delete. Press ENTER
after each modification.
6. ASTRO MODE: Press LAT to change latitude.
Press ENTER. Press DAY and SELCT to add or
delete days in the sunset mode. Press ENTER.
Press HOUR and/or MIN to change offset time for
sunset. Press EVENT to change offset from + to –.
Press ENTER and follow the same procedure above
to modify or review sunrise settings.
7.

RUN MODE: Time, day and seconds are displayed.
If today is a programmed holiday, an H (Holiday) will
be displayed steady.

8.0 OVR1 (override key) is effective only in the run
mode. If the load is scheduled for ON/OFF, the
present load status will change until the next scheduled event. CH1 will flash when the load is overridden from scheduled event.
4

9

DWZ100B

3/18/07

12:20 AM

Page 13

NOTE: A + sign will turn load ON that many hours
and/or minutes after sunset. A - sign will turn load
ON that many hours and/or minutes before sunset.
The display will show:

If daylight savings is required, press ENTER, display will show:
MO TU WE TH FR SA SU H

CH1 2 3 4 ASTRO SEASON 1 2 3 4
MO TU WE TH FR SA SU H
ON
OFF

Press SELCT and then ENTER to activate sunrise
time.

Press ENTER to accept default dates (second
Sunday in March) or press MONTH, DATE, and
DAY to modify DST settings and press ENTER. The
display will show:

NOTE: To turn load OFF at a preset OFF time, leave
this field bank. Press ENTER. The display will show:
CH1 2 3 4 ASTRO SEASON 1 2 3 4
MO TU WE TH FR SA SU H
ON
OFF

Press ENTER, display will show:
MO TU WE TH FR SA SU H

If an offset to sunrise time is required, press HOUR
and MIN. Offset can be set to 4 hours and 59 minutes max. Press EVENT to select + or – and then
press ENTER.
NOTE: A + sign will turn load OFF that many hours
and/or minutes after sunrise. A - sign will turn load
OFF that many hours and/or minutes before sunrise.
6.2 ASTRONOMIC ON AND TIME OFF
Set astronomic ON per sections 6.0 and 6.1
TIME OFF:
Press MODE until “sch01” appears. Press ENTER
until a blank schedule appears. Press HOUR and
MIN to set desired OFF time. Press SELCT to select
desired days, holiday and then press ENTER.
6.3 TIME ON AND ASTRONOMIC OFF
Press MODE until “sch01” appears. Press ENTER
until a blank schedule appears. Press HOUR, MIN
and EVENT to set desired ON time. Press SELCT
8

Press ENTER to accept default dates (first Sunday
in November) or press MONTH, DATE, and DAY to
modify DST settings and press ENTER. Press
MODE, the display will show:

ON
OFF

NOTE: DST OFF indicates Daylight Savings Time
was not set.
4.0 SET INDIVIDUAL HOLIDAY DATES
Press MODE until display shows:
MO TU WE TH FR SA SU H

5

DWZ100B

3/18/07

12:20 AM

Page 15

Press MONTH and DATE to set holiday 1 and then
press ENTER.
The display will show:

Follow the same procedures above to set more
schedule entries.
6.0 TO SET ASTRONOMIC SCHEDULE
Press MODE until display shows:

MO TU WE TH FR SA SU H

CH1 2 3 4 ASTRO SEASON 1 2 3 4

To delete any holiday press DEL and press ENTER.
NOTE:
a. A total of 24 holidays can be set, all following the
same schedule.
b. For any holiday to be used, the MONTH and
DATE must be preset.
5.0 SCHEDULE SET MODE
`
Press MODE until display shows:

Press the LAT key to advance to the desired degree
of latitude, from 0° to 60° north or 0° to 60° south.
Press ENTER.
6.1 SELECTING ASTRO DAYS
Press SELCT to select desired days or holiday in
which you want the load turn ON at sunset and then
press ENTER.

CH1 2 3 4 ASTRO SEASON 1 2 3 4

Display will show:
SIG1 SIG2 CLK DATE SCH

CH1 2 3 4 ASTRO SEASON 1 2 3 4
MO TU WE TH FR SA SU H

5.1 SETTING HOURS AND MINUTES
a. Press HOUR and MIN to set desired time.
A Press EVENT to set desired event.
5.2 SETTING DAYS AND HOLIDAY
Press SELCT to select the flashing desired days or
holiday, otherwise press DAY to skip and then press
ENTER. To delete entry, press DAY until previously
selected entry flashes, press SELCT and then
press ENTER.
The display will show:
CH1 2 3 4 ASTRO SEASON 1 2 3 4

SIG1 SIG2 CLK DATE SCH

6

ON
OFF

NOTE: Sunset Time will be based on Date and
Latitude entered.
Press ENTER. The display will show:
CH1 2 3 4 ASTRO SEASON 1 2 3 4
MO TU WE TH FR SA SU H
ON
OFF

If an offset to sunset time is required, press HOUR
and MIN. Offset can be set to 4 hours and 59 minutes max. Press EVENT to select + or – and then
press ENTER.

7
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2007:03:29 13:36:04-04:00
Create Date                     : 2007:03:18 00:21:23-04:00
Author                          : Donna Mackay
Page Count                      : 8
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:29f74379-d508-11db-be03-000d93c189c8
Producer                        : Acrobat Distiller 6.0.1 for Macintosh
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Document ID                     : uuid:29f65087-d508-11db-be03-000d93c189c8
Format                          : application/pdf
Title                           : DWZ100B
Creator                         : Donna Mackay
EXIF Metadata provided by EXIF.tools

Navigation menu