Aux Oven 31715011 TRACE 1310 Auxiliary Manual

2016-05-17

• Contents
• Preface
  • About Your System
  • Power Rating
  • Contacting Us
  • Related Documentation
  • Safety Alerts and Important Information
    • Safety Symbols and Signal Words
  • Instrument Markings and Symbols
  • Hydrogen Safety Precautions
    • Using Hydrogen with TRACE 1300/TRACE 1310
    • Hydrogen Connection Guidelines
    • Purchasing Hydrogen
    • Properly Storing Hydrogen
    • Hydrogen Safety Codes, Standards and References
  • Hazardous Substances Precautions
    • Venting Toxic Gases
• Site Preparation
  • Introduction
  • Entrance Requirements
  • Workbench & Space Requirements
  • Lighting Requirements
  • Power Requirements
  • LAN Network Requirements
  • Environment Requirements
  • Gas Equipment Requirements
  • Receiving Instruments
  • What Happens Next?
• TRACE 1310 Auxiliary Oven Overview
  • Front View
  • Top View
  • Back View
  • Right View
  • Left View
  • Internal View
    • The Heated Compartment
    • The Unheated Compartment
  • Main Oven
  • Label Location on the Instrument
  • Tools Needed
• Components Installation
  • Installing the Valves
  • Installing Valves and Fittings into the Main Oven
    • Installing the Needle Valves and the Sample Inlet Fittings into the Main Oven
    • Bulkhead Connectors for High Temperature
    • Installing the Rotary Valves into the Main Oven
    • Installing the Diaphragm Valves in The Main Oven
  • Installing Valves and Fittings in the Unheated Compartment
    • Installing the Needle Valves and the Sample Inlet Fittings into the Unheated Compartment
    • Installing an Unheated Rotary Valve into the Unheated Compartment
    • Installing an Unheated Diaphragm Valve into the Unheated Compartment
    • Installing an Unheated Valve for Liquid Sample into the Unheated Compartment
  • Plumbing Valves and System
  • Configuring the Valves
    • Gas Sampling Valves
    • Switching Valves
    • Testing the Valves
  • Installing the Auxiliary Gas Modules
    • Special Use of the Auxiliary Gas Module for Controlling the Split Flow
  • Installing the Auxiliary Detectors Assembly
  • Installing the Secondary Oven Assembly
  • Installing the Methanizer Assembly
    • Methanizer Pneumatic Circuit
  • Installing a Heated Sample Transfer Line
  • Wiring the TRACE 1310 Auxiliary Oven to the GC
  • Coupling the TRACE 1310 Auxiliary Oven to the GC
• Operation
  • Operating Through the GC Touch Screen
  • Operating Through the CDS
• Maintenance & Troubleshooting
  • Read Me First
  • Maintenance Supplies and Tools
    • Cleaning Stainless Steel Components
  • Powering On the TRACE 1310 Auxiliary Oven
  • Shutting Down the TRACE 1310 Auxiliary Oven
  • Cleaning the Instrument Externally
  • Replacing the Column into the Secondary Oven
  • Maintaining the Methanizer
    • Performing a Leak Test
  • Catalyst Activation
  • Troubleshooting
    • Leak Testing
    • Valve Switching
    • Valve Plumbing
    • Methanizer Analytical Troubleshooting
• Ordering Parts