AIAS 1310 31716000 AI AS User Guide

2016-05-17

• Preface
  • About Your System
  • Environmental Conditions
  • Rating
  • Contacting Us
  • Safety Alerts and Important Information
    • Safety Symbols and Signal Words
  • Instrument Markings and Symbols
  • Safety Information and Warnings
    • General Considerations
    • Electrical Hazards
    • Other Hazards
    • Working with Toxic or other Harmful Compounds
    • Maintenance
    • Disposal
  • Hazardous Substances Precautions
• Contents
• Introduction
  • The AI 1310/AS 1310 Sampling System
    • Sampling Unit
  • Configurations of the 1310 Series Autosampler
    • AI 1310 Configuration
    • AS 1310 Configuration
    • Gemini Configuration
    • Installation
  • Technical Specifications
• Sampling Unit
  • Base
  • Turret
  • Injection Assembly
    • Vial Capture Device
    • Syringe
    • Turret Movements
  • Washing and Waste Tray
  • Back of the Sampling Unit
  • Sample Trays
    • 8-Position Sample Tray
    • 105-Position Sample Tray Assembly
    • 155-Position Sample Tray Assembly
    • Vials
  • Centering Plate
    • Centering Plate for TRACE 1300/TRACE 1310
    • Centering Plate for TRACE GC Ultra and FOCUS GC
  • Status LED
• Installation
  • Who Performs the Installation
  • Electrical Requirements
  • How to Lift and Carry the Sampling Unit
  • Sampling System Support
    • Sampling System Support for TRACE 1300/TRACE 1310
    • Sampling System Support for TRACE GC Ultra
    • Sampling System Support for FOCUS GC
    • References for the Installation
  • Installing the Sampling System Support on the TRACE 1300/1310 GC
    • Assembling of the Sampling System Support on the Front Injector Module
    • Assembling of the Sampling System Support on the Back Injector Module
    • Assembling of the Sampling System Support for the Gemini Configuration
    • Assembling of the Sampling System Support When a TSQ Quantum is Coupled with the GC
  • Installing the Sampling System Support on the TRACE GC Ultra
    • Installing the Spacer Inside the GC
    • Assembling of the Sampling System Support on the GC Right Side
    • Assembling of the Sampling System Support on the GC Left Side
  • Installing the Sampling System Support on the FOCUS GC
    • Assembling of the Sampling System Support on the GC right side
    • Assembling of the Sampling System Support on FOCUS GC MS Version
    • Space Saving Installation
  • Installation of the AI 1310/AS 1310 on the GC
    • Installation of the Sampling Unit
    • Installation of the Syringe
    • Electrical Connections
    • Instrument Start-up
• AI 1310/AS 1310 Control
  • Control Through the Chromatography Data System
    • User Interface
    • Chromeleon CDS User Interface
    • Xcalibur, Chrom-Card, and ChomQuest CDS User Interface
    • Messages
  • Control Through the TRACE GC Ultra
    • Configuring the AI 1310/AS 1310
    • AI 1310/AS 1310 Menu
    • Extended Control Menu
    • When No Vial Abort Menu
  • Control Through the FOCUS GC
    • Configuring the AI 1310/AS 1310
    • AI 1310/AS 1310 Menu
    • Sequence of Samples with the AS 1310
  • Guidelines for Programming with Different Injectors
    • SSL Inlet (TRACE 1300/1310 GC)
    • SSL Inlet (TRACE GC Ultra/FOCUS GC)
    • SSL Inlet with a Merlin Microseal™ (TRACE GC Ultra Only)
    • PTV Inlet (TRACE 1300/1310 GCTRACE GC Ultra)
    • PTV Inlet with a Merlin Microseal™ (TRACE 1300/1310 GC, TRACE GC Ultra)
    • PKD and PPKD Inlets (TRACE GC Ultra, FOCUS GC)
• Maintenance
  • Current Maintenance
  • Emptying of the Waste Container
  • Cleaning of the Sample Tray Accessory
  • Cleaning the Instrument Externally
  • Replacing the Syringe
  • Cleaning the Syringe
    • Automated Cleaning
    • Manual Cleaning
  • Preparing a New Syringe
  • Moving Away the Sampling Unit from the Injector Module
• Glossary
• Index