Product Detail Manual

2014-06-02

: Pdf 347578-Attachment 347578-Attachment 092644 Batch4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadProduct Detail Manual
Open PDF In BrowserView PDF
Insulated Pliers
Insulated Standard Long-Nose Pliers – Side-Cutting
Additional Features:
Individually tested to exceed standards.
Induction hardened cutting knives for long life.
Knurled jaws for sure wrapping and looping.
Curved handles provide greater tool control.

•
•
•
•

D203-7-INS

ÕÌ̈˜}ʘˆÛiÃ

Cat. No.

Overall
Length

Jaw
Length

Jaw
Width

Jaw
Thickness

Knife
Length


ÕV…ˆ>Ã

œÕÌi>ÕÝ

Point
Thickness

Handle
Finish

Handle
Color

Weight
(lbs.)

D203-6-INS

6-7/8" (175 mm)

1-15/16" (49 mm) 11/16" (17 mm)

3/8" (10 mm)

1/2" (13 mm)

3/32" (2 mm)

insulated

orange

.35

D203-7-INS

7-3/8" (187 mm)

2-7/16" (62 mm)

3/8" (10 mm)

1/2" (13 mm)

3/32" (2 mm)

insulated

orange

.37

11/16" (17 mm)

Insulated Pump Pliers

•
•

D502-10-INS

Cat. No.

Overall Length

Max. Jaw Capacity

Handle Finish

Handle Color

Weight (lbs.)

D502-10-INS

10-1/4" (260 mm)

1-3/4" (44 mm)

insulated

orange

1.09

Insulated Crimping/Cutting Tool
Insulated Crimping/Cutting Tool

WEAR

1005-INS

Cat. No.

Overall Length

Crimps

Handle Color

Weight (lbs.)

1005-INS

9-3/4" (248 mm)

10 to 22 AWG

orange

1.05

Insulated Cable Cutter
Insulated High-Leverage Cable Cutter
Additional Features:
Individually tested to exceed standards.
Special, high-leverage design for exceptional
cutting capability.
Cable-gripping shear-type jaws.
Precision, one-hand shearing action.
Perfect for working in confined spaces.

•
•
•
•
•

63050-INS

WARNING: Do NOT use to cut steel or ACSR.

Cat. No.

Overall Length

Cuts Up to

Handle Color

Weight (lbs.)

63050-INS

9-5/8" (245 mm)

4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications wire

orange

1.04

All dimensions are in inches and (millimeters).

WARNING: Only use tools that are marked with the official inter-

national 1000-volt rating symbol shown below, if there is any chance
that the tools will make contact with an
energized source.

WARNING: Whenever possible, always de-energize lines and
equipment prior to working on or around them. Klein insulated tools
are designed only to reduce the chance of injury where the tool may
make contact with an energized source.

WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Wear approved eye protection. Always inspect your tools
before use. Do not use if orange coating cracks, breaks or becomes
damaged. Destroy tool if white layer shows through orange layer.
WARNING: Because moisture, films, or other surface contami-

nants are conductive, Klein insulated tools must be kept clean, dry,
and free of any surface contaminants.

59

S

9
Y P NE NNO
R O T E CTI

N

•
•
•
•
•

D213 - E
Y

Additional Features:
Individually tested to exceed standards.
Insulated crimping tool with tapered nose designed
for working in confined spaces.
Crimping dies marked for insulated and non-insulated
solderless terminals and connectors.
Accommodates wire from No. 10 to 22 AWG.
Wire cutter in nose.

Insulated Tools

Additional Features:
Individually tested to exceed standards.
Secure tongue and groove design for
non-slip grip – even with heavy pressure.

Introduction – Insulated Tools
Thick, exceptionally tough,
high-dielectric white inner
coating is bonded to the tool.

Forged steel handle.

A flame retardant, impact-resistant,
bright orange outer coating.

Insulated Tools

The line of insulated tools incorporates all the Klein quality design
and construction features that professionals have relied on. The
tools combine excellent functionality along with reduction of risk of
injury where a tool might make contact with an energized source
with voltage up to 1000 volts.
All catalog numbers for Klein insulated tools have the suffix “INS”
and are marked with the official international 1000-volt rating
symbol. Not all tools with plastic coatings or plastic handles provide
protection against electrical shock. Only use those tools that are
marked with the official international 1000-volt rating symbol,
as shown, if there is any chance that the tool will make
contact with an energized source.

Klein insulated tools comply with the IEC 60900
•	All
and ASTMF 1505 standards for insulated tools, and are
clearly marked with the 1000-volt rating symbol.

large, bright orange handles make the tool
•	The
comfortable to use all day and easy to identify in the field.
insulation on each tool consists of two layers.
•	The
The high-dielectric white inner layer is a thick, exceptionally
tough base coating which is bonded to the tool.
The outer layer is a flame-resistant, bright orange color.

Insulated Pliers
Features:

WEAR

D213 - E
Y

N

S

9
Y P NE NNO
R O T E CTI

Two layers of insulation
provide protection against
electric shock.

Custom,
US-made
tool steel.

Klein insulated tools exceed the IEC
60900 and ASTM F1505 standards, for
insulated tools, and are clearly marked
with the official 1000-volt rating symbol.

All dimensions are in inches and (millimeters).

WARNING: Only use tools that are marked with the official inter-

national 1000-volt rating symbol shown below, if there is any chance
that the tools will make contact with an
energized source.

56

WARNING: Whenever possible, always de-energize lines and
equipment prior to working on or around them. Klein insulated tools
are designed only to reduce the chance of injury where the tool may
make contact with an energized source.

Integral guards help
prevent hand contact with
conductive parts.

MADE IN USA

WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Wear approved eye protection. Always inspect your tools
before use. Do not use if orange coating cracks, breaks or becomes
damaged. Destroy tool if white layer shows through orange layer.
WARNING: Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry,
and free of any surface contaminants.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Modify Date                     : 2009:08:24 13:58:08+05:30
Create Date                     : 2009:08:24 13:57:11+05:30
Creator                         :  Adobe Photoshop CS3 Macintosh
Producer                        : Adobe Photoshop for Macintosh -- Image Conversion Plug-in
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu