2011 TPI Corporation Electrical Fan & Light Products 40712 Catalog
125768-Catalog 125768-Catalog 125768-Catalog Batch9 unilog cesco-content
125777-Catalog 125777-Catalog 125777-Catalog Batch9 unilog cesco-content
133223-Catalog 133223-Catalog 133223-Catalog Batch9 unilog cesco-content
2014-10-17
: Pdf 40712-Catalog 40712-Catalog 686334 Batch10 unilog
Open the PDF directly: View PDF 
.
Page Count: 58
| Download | |
| Open PDF In Browser | View PDF |
TPI Industrial Assembled Maximum Duty Circulators 2 Features • Easy access hinged guard • Drop down 2-Speed switch 24” 30” • Cord options are shown below • Steel hub/spider aluminum paddle blades • Powder coated steel guards • Meets OSHA standards • 5 year limited warranty DIMENSIONS 27” Diameter x 14.5” Depth 33.5” Diameter x 14.5” Depth Motor Specifications • 2-Speed • 1-Phase, 120V • Permanent split capacitor • Frame size: 48 • 1/2 HP • Ball bearing • Totally enclosed, permanently lubricated • 1/2” Shaft Pedestal Specifications • Pedestal pole adjusts the center of the fan from 52 to 78 inches. • Pedestal steel dome base is 27” in diameter and has 5 carriage bolts. Factory Assembled and Tested Fan Heads, Mounts, and Wheel Kits HDM-C CEILING MOUNT HDM-I I-BEAM MOUNT HDM-W WALL MOUNT OPTIONAL WHEEL KIT Standard Models ASSEMBLED FAN HEAD COLOR BLADE SIZE HDH 24-JR Yellow 24” HDH 30-JR Yellow 30” UPC# 686334 MODEL 874441 874465 874502 HDH 24-GJR Gray 24” 874519 HDH 30-GJR Gray 30” CFM / RPM AMPS SHIPPING WT. (LBS) HEAD LIST 6500 / 800 3.5 44 611 7500 / 800 4 48 627 8600 / 1100 6500 / 800 3.5 44 611 9850 / 1100 7500 / 800 4 48 627 HP 1/2 HIGH LOW 8600 / 1100 9850 / 1100 Accessories UPC# 686334 MODEL COLOR DESCRIPTION SHIPPING WT. (LBS) LIST 796095 796101 796118 796125 796187 796194 796200 796217 796224 874724 874731 874748 874755 874762 868181 868136 HDM-P HDM-W HDM-I HDM-C ACM-P ACM-W ACM-I ACM-C ACM-S RS 06-EC RS 09-EC RS 12-EC SCK-12 R1-MOT ACM-PM ACM-WK Yellow Yellow Yellow Yellow Gray Gray Gray Gray Gray Yellow Yellow Yellow ---Yellow Standard Black Standard Black Heavy Duty Pedestal Mount Heavy Duty Wall Mount Heavy Duty I-Beam Mount Heavy Duty Ceiling Mount Pedestal Mount Wall Mount I-Beam Mount Ceiling Mount Suspension Mount 6’ Extension Cord with Power Switch 9’ Extension Cord with Power Switch 12’ Extension Cord with Power Switch 12’ Safety Cable with Clamps 1/2 HP Remote Switch Pole Mount Optional Wheel Kit 34 lbs. 3 lbs. 9 lbs. 3 lbs. 34 lbs. 3 lbs. 9 lbs. 3 lbs. 2 lbs. 1 lbs. 1.5 lbs. 2 lbs. .5 lbs. 1 lbs. 5 lbs 4 lbs. 169 66 127 73 162 61 120 66 54 21 23 25 23 81 85 78 TPI Industrial Unassembled Maximum Duty Circulators Features 3 • Easy access hinged guard DIMENSIONS • Drop down 2-Speed switch 24” 27” Diameter x 14.5” Depth 30” 33.5” Diameter x 14.5” Depth • Cord options are shown below • Steel hub/spider aluminum paddle blades • Coated steel guards • Meets OSHA standards Motor Specifications • Totally enclosed • 2-Speed • Permanent split capacitor • 1-Phase, 120V • Permanently lubricated • Ball bearing • 1/2” Shaft • Frame size: 48 Product Specifications • Pedestal pole adjusts the center of the fan from 52 to 70 inches. • Pedestal steel dome base is 27” in diameter and has 5 carriage bolts. TPI Industrial Mounts SUSPENSION MOUNT I-BEAM MOUNT CEILING MOUNT Note: 1/3 and 1/4 HP fans come with 3 paddle blades. WALL MOUNT OPTIONAL WHEEL KIT Note: Motor, blades, guard, and mount are packed and shipped in a single UPS-able carton. Standard Models FAN TYPE MOTOR HP 24” 30” COLOR POLE ADJUSTMENT WARRANTY 24” 30” TYPE of MOUNT Pedestal Mount Wall Mount I-Beam Mount Ceiling Mount Suspension Mount Pedestal Mount Wall Mount I-Beam Mount Ceiling Mount Suspension Mount UPC# 686334 874526 874540 874564 874588 874601 874533 874557 874571 874595 874618 MAX AMPS STANDARD INDUSTRIAL 1/3 SPEEDS CFM / RPM SIZE MAX AMPS HIGH PERFORMANCE 1/4 2 7000 / 5200 1100 / 800 8200 / 6200 1100 / 800 GRAY 52” to 82” 3 YEARS MODEL UHP 24-PJR UHP 24-WJR UHP 24-IJR UHP 24-CJR UHP 24-SJR UHP 30-PJR UHP 30-WJR UHP 30-IJR UHP 30-CJR UHP 30-SJR 2.8 3.0 WT. (lbs.) 75 45 50 45 43 78 48 53 48 46 LIST 663 560 621 567 555 680 579 638 584 572 UPC# 686334 874625 874649 874663 874687 874700 874632 874656 874670 874694 874717 2 6800 / 5000 1100 / 800 7900 / 6000 1100 / 800 GRAY 43” to 60” 1 YEAR MODEL ACU 24-PJR ACU 24-WJR ACU 24-IJR ACU 24-CJR ACU 24-SJR ACU 30-PJR ACU 30-WJR ACU 30-IJR ACU 30-CJR ACU 30-SJR 2.5 2.7 WT. (lbs.) 75 45 50 45 43 78 48 53 48 46 LIST 521 452 513 459 446 532 464 525 471 459 Accessories UPC# 686334 874724 874731 874748 874755 874779 874786 MODEL COLOR DESCRIPTION RS 06-EC RS 09-EC RS 12-EC SCK-12 R2-MOT R3-MOT Yellow Yellow Yellow ---Yellow Yellow 6’ Extension Cord with Power Switch 9’ Extension Cord with Power Switch 12’ Extension Cord with Power Switch 12’ Safety Cable with Clamps Remote Switch for 1/3 HP Motor Remote Switch for 1/4 HP Motor SHIPPING WT. (LBS) 1 lbs. 1.5 lbs. 2 lbs. .5 lbs. 1 lbs. 1 lbs. LIST 21 23 25 23 75 70 TPI Industrial Heavy Duty Yellow Air Circulator 4 Features • Pull chain switch • Cord-SJT type 3 conductor, 12’ long • Steel hub/spider aluminum paddle blades • Powder coated steel guards • Meets OSHA standards 24” 30” • 5 year limited warranty DIMENSIONS 27” Diameter x 14.5” Depth 33.5” Diameter x 14.5” Depth Motor Specifications • 2-Speed • 1 Phase, 120V • Permanent split capacitor • Frame size: 48 • 1/2 HP • Ball bearing • Totally enclosed, permanently lubricated • 1/2” Shaft Pedestal Specifications • Pedestal pole adjusts the center of the fan from 52 to 78 inches. HDH-30 FAN HEAD WITH HDM-P PEDESTAL MOUNT • Pedestal steel dome base is 27” in. diameter and has 5 carriage bolts. Factory Assembled and Tested Fan Heads, Mounts, and Wheel Kits HDM-C CEILING MOUNT HDM-I I-BEAM MOUNT HDM-W WALL MOUNT OPTIONAL WHEEL KIT Standard Models CFM / RPM STYLE NUMBER SIZE HIGH LOW FAN HEAD AMPS HIGH FAN TYPE UPC# 686334 MOUNT MODEL UPC# 686334 MODEL SHIPPING HEAD MOUNT TOTAL WT. (LBS) LIST LIST LIST ----- Fan Head HDH 24 ----- ----- 44 559 ----- 559 HD 24-P Pedestal Fan HDH 24 796095 HDM-P 78 558 169 728 HDH 24 796101 HDM-W 47 558 66 624 HD 24-W 24” 8600 / 6500 / 1100 800 3.5 Wall Mount Fan 796071 HD 24-I I-Beam Mount Fan HDH 24 796118 HDM-I 53 558 127 686 HD 24-C Ceiling Mount Fan HDH 24 796125 HDM-C 47 558 73 632 ----- Fan Head HDH 30 ----- ----- 48 571 ----- 571 HD 30-P Pedestal Fan HDH 30 796095 HDM-P 82 570 169 740 HDH 30 796101 HDM-W 51 570 66 636 HD 30-W 30” 9850 / 7500 / 1100 800 4 Wall Mount Fan 796088 HD 30-I I-Beam Mount Fan HDH 30 796118 HDM-I 57 570 127 698 HD 30-C Ceiling Mount Fan HDH 30 796125 HDM-C 51 570 73 644 868136 ACM-WK 4 ---- ---- 78 Optional Wheel Kit TPI Industrial Assembled Circulator Heads and Mounts Features 5 • Pull chain switch DIMENSIONS • SJT type 3 conductor, 12’ long cord 24” 27” Diameter x 14.5” Depth • Steel hub/spider aluminum paddle blades 30” 33.5” Diameter x 14.5” Depth • Coated steel guards • Meets OSHA standards Motor Specifications • 2-Speed • Totally enclosed • 1 Phase, 120V • Permanent split capacitor • Ball bearing • Permanently lubricated • Frame size: 48 • 1/2” Shaft Product Specifications • Oscillating model oscillates in a • Metal gears in the oscillating 90° arc or can be locked in a fixed mechanism allow the fan to operate at a maximum 30° downward tilt position Standard Models FAN TYPE FAN HEAD CFM / RPM WEIGHT AMPS HEAVY DUTY HIGH PERFORMANCE STANDARD INDUSTRIAL OSCILLATING HP 1/2 1/3 1/4 1/4 TYPE STATIONARY STATIONARY STATIONARY OSCILLATING 24” 8600 / 7100 1100 / 800 44 lbs. 3.5 7000 / 5200 1100 / 800 40 lbs. 2.8 6800 / 5000 1100 / 800 40 lbs. 2.5 6800 / 5000 1100 / 800 44 lbs. 2.5 30” 9850 / 8100 1100 / 800 48 lbs. 4 8200 / 6200 1100 / 800 44 lbs. 3.0 7900 / 6000 1100 / 800 44 lbs. 2.7 7900 / 6000 1100 / 800 48 lbs. 2.7 WARRANTY 5 YEARS 3 YEARS 1 YEAR 1 YEAR SIZE UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST 24” 853927 HDH-24G 535 798983 IHP 24-H 409 796163 ACH 24 319 796361 ACH 24-O 493 30” 852869 HDH-30G 553 798990 IHP 30-H 427 796170 ACH 30 331 796378 ACH 30-O 511 Six factory assembled and tested fan mounts that can be used with any of the non-oscillating TPI Industrial heads. Industrial Mounts WALL MOUNT I-BEAM MOUNT POLE MOUNT PEDESTAL SUSPENSION MOUNT Attaches to 4”, 6”, or 8” poles. CEILING MOUNT TPI Industrial Assembled Circulator Heads and Mounts 6 Product Specifications • Pedestal pole adjusts the center of fan from 52” to 78” and bolts to 27" diameter steel dome base with 5 carriage bolts • I-beam mount & ceiling mount require 1 1/2” or longer pipe nipple for assembly (not supplied) • Pole mount attaches to 4”, 6”, or 8” with U-bolts (not supplied) • Oscillating motors can only be used with any mount when motor can be mounted in the upright position Standard Models SUSPENSION MOUNT I-BEAM MOUNT WALL MOUNT CEILING MOUNT CIRCULATOR MOUNT MODEL Pedestal Wall Mount I-Beam Mount Ceiling Mount Suspension Mount Pole Mount Optional Wheel Kit ACM-P ACM-W ACM-I ACM-C ACM-S ACM-PM ACM-WK STYLE NUMBER IHP 24-P IHP 24-W IHP 24-I IHP 24-C IHP 24-S IHP 24-PM IHP 30-P IHP 30-W IHP 30-I IHP 30-C IHP 30-S IHP 30-PM AC 24-P AC 24-W AC 24-I AC 24-C AC 24-S AC 24-PM AC 30-P AC 30-W AC 30-I AC 30-C AC 30-S AC 30-PM AC 24-PO AC 24-WO AC 24-PMO AC 30-PO AC 30-WO AC 30-PMO SIZE 24” 30” 24” 30” 24” 30” UPC# 686334 796187 796194 796200 796217 796224 868181 868136 MODEL NUMBER SHIPPING WT. (LBS.) FAN HEAD MOUNT 1/3 HP INDUSTRIAL HIGH PERFORMANCE Pedestal Fan ACM-P 75 Wall Mount Fan ACM-W 45 I-Beam Mount Fan ACM-I 50 IHP 24-H Ceiling Mount Fan ACM-C 45 Suspension Mount ACM-S 43 Pole Mount ACM-PM 46 Pedestal Fan ACM-P 78 Wall Mount Fan ACM-W 48 I-Beam Mount Fan ACM-I 53 IHP 30-H Ceiling Mount Fan ACM-C 48 Suspension Mount ACM-S 46 Pole Mount ACM-PM 49 1/4 HP STANDARD INDUSTRIAL Pedestal Fan ACM-P 75 Wall Mount Fan ACM-W 45 I-Beam Mount Fan ACM-I 50 ACH 24 Ceiling Mount Fan ACM-C 45 Suspension Mount ACM-S 43 Pole Mount ACM-PM 46 Pedestal Fan ACM-P 78 Wall Mount Fan ACM-W 48 I-Beam Mount Fan ACM-I 53 ACH 30 Ceiling Mount Fan ACM-C 48 Suspension Mount ACM-S 46 Pole Mount ACM-PM 49 1/4 HP OSCILLATING INDUSTRIAL Pedestal Fan ACM-P 79 Wall Mount Fan ACH 24-O ACM-W 49 Pole Mount ACM-PM 52 Pedestal Fan ACM-P 82 Wall Mount Fan ACH 30-O ACM-W 52 Pole Mount ACM-PM 55 FAN TYPE OPTIONAL WHEEL KIT PEDESTAL SHIPPING WT. (LBS) 34 lbs. 3 lbs. 9 lbs. 3 lbs. 2 lbs. 5 lbs 4 lbs. HEAD LIST 409 427 319 331 493 511 LIST 162 60 120 66 54 84 78 MOUNT LIST TOTAL LIST 162 61 120 66 54 85 162 60 120 66 54 85 570 470 528 474 462 492 589 487 546 492 481 512 162 61 120 66 54 85 162 61 120 66 54 85 481 380 438 384 373 404 492 392 450 396 384 416 162 61 84 162 60 85 654 554 577 673 571 596 TPI Industrial Unassembled Circulators Features 7 • Pull chain switch • SJT type 3 conductor, 12’ long cord DIMENSIONS • Steel hub/spider aluminum paddle blades 24” 27” Diameter x 14.5” Depth 30” 33.5” Diameter x 14.5” Depth • Coated steel guards • Meets OSHA standards Motor Specifications • Totally enclosed • 2-speed • Permanent split capacitor • 1-Phase, 120V • Permanently lubricated • Ball bearing • 1/2” Shaft • Frame size: 48 Product Specifications PEDESTAL • Oscillating model oscillates in a • Metal gears in the oscillating mechanism allow the fan to operate 90° arc or can be locked in a fixed at a maximum 30° downward tilt position TPI Industrial Mounts WALL MOUNT I-BEAM MOUNT SUSPENSION MOUNT CEILING MOUNT Note: Motor, blades, guard, and mount are packed and shipped in a single UPS-able carton. Standard Models FAN TYPE HIGH PERFORMANCE HP MOTOR SPEEDS 24” CFM / RPM 30” MAX STANDARD INDUSTRIAL AMPS MAX AMPS 1/3 1/4 1/4 2 7000 / 5200 1100 / 800 8200 / 6200 1100 / 800 2 6800 / 5000 1100 / 800 7900 / 6000 1100 / 800 2 6800 / 5000 1100 / 800 7900 / 6000 1100 / 800 2.8 3.0 2.5 2.7 COLOR GRAY GRAY GRAY POLE ADJUSTMENT 52” to 74” 43” to 60” 52” to 74” WARRANTY SIZE 24” 30” 3 YEARS TYPE of MOUNT UPC# 686334 Pedestal Mount Wall Mount 1 YEAR MODEL WT. (lbs.) LIST UPC# 686334 799003 UHP 24-P 75 553 799027 UHP 24-W 45 450 I-Beam Mount 799034 UHP 24-I 50 MAX AMPS OSCILLATING 2.5 2.7 1 YEAR MODEL WT. (lbs.) LIST UPC# 686334 MODEL WT. (lbs.) LIST 796231 ACU 24-P 75 412 796248 ACU 24-W 45 343 796408 ACU 24-PO 79 625 796415 ACU 24-WO 49 523 511 796255 ACU 24-I 50 403 ----- --- Ceiling Mount 799041 UHP 24-C 45 457 796262 ACU 24-C 45 349 ----- --- Suspension Mount 799058 UHP 24-S 43 445 796279 ACU 24-S 43 336 ----- --- Pedestal Mount 799010 UHP 30-P 78 570 796286 ACU 30-P 78 423 796422 ACU 30-PO 82 638 Wall Mount 799065 UHP 30-W 48 469 796293 ACU 30-W 48 355 796439 ACU 30-WO 52 535 I-Beam Mount 799072 UHP 30-I 53 528 796309 ACU 30-I 53 415 ----- --- Ceiling Mount 799089 UHP 30-C 48 474 796316 ACU 30-C 48 361 ----- --- Suspension Mount 799096 UHP 30-S 46 462 796323 ACU 30-S 46 349 ----- --- TPI Industrial 20” Circulators Features 8 • Pull chain switch • SJT type 3 conductor, 12’ long cord • Steel hub/spider aluminum paddle blades • Coated steel guards • Meets OSHA standards • 1 Year limited warranty WALL MOUNT • 2-Speed • 1-Phase, 120V • Ball bearing • Frame size: 48 Standard Models UPC# 686334 MODEL STYLE MOUNT TYPE 868143 ACU 20-P Unassembled all components and mount in one box Pedestal Mount ACU 20-W 868471 ACH 20 22” Diameter x 14.5” Depth Motor Specifications PEDESTAL 868150 DIMENSIONS Assembled Fan Head • 1/4 HP • Permanent split capacitor • Totally enclosed, permanently lubricated • 1/2” Shaft CFM / RPM 5600 / 4100 1100 / 900 Wall Mount None - use with any TPI “ACM” or “CACM” Mount AMPS (High) 2.4 WT. (lbs.) LIST 72 378 42 285 39 273 TPI Industrial Circulator Components Motors Mounts TYPE UPC# 686334 MODEL LIST HEAVY DUTY 796132 HD-MOT 343 HIGH PERFORMANCE 799515 IHP-MOT 240 INDUSTRIAL 796330 AC-MOT 139 OSCILLATING 796446 AC-MOT-O 324 Guards & Blades TYPE UPC# 686334 MODEL LIST YELLOW GUARD & BLADE FOR 1/2 HP MOTOR 24” 796149 HD-24GB 193 30” 796156 HD-30GB 211 UPC# 686334 TYPE MODEL LIST YELLOW MOUNTS PEDESTAL POLE & BASE 796095 HDM-P 169 WALL MOUNT 796101 HDM-W 66 I-BEAM MOUNT 796118 HDM-I 127 CEILING MOUNT 796125 HDM-C 73 GRAY MOUNTS PEDESTAL POLE & BASE 796187 ACM-P 162 WALL MOUNT 796194 ACM-W 61 I-BEAM MOUNT 796200 ACM-I 120 CEILING MOUNT 796217 ACM-C 66 SUSPENSION MOUNT 796224 ACM-S 54 POLE MOUNT 868181 ACMPM 85 WHEEL KIT 868136 ACM-WK 78 SILVER GUARD & BLADE FOR 1/2 HP (HD) MOTOR COMMERCIAL MOUNTS 24” 796453 HD-24GB-C 169 30” 796460 HD-30GB-C 186 SILVER GUARD & BLADE FOR 1/3HP & 1/4HP MOTORS 24” 796347 AC-24GB 144 30” 796354 AC-30GB 162 PEDESTAL POLE & BASE 869751 CACM-P 137 FDA WHITE MOUNTS (FOR USE WITH WASHDOWN FAN HEADS IN FOOD SERVICE APPLICATIONS) PEDESTAL POLE & BASE 868259 WACM-P 172 WALL MOUNT 868266 WACM-W 67 TPI Industrial Specialty Circulator Heads Features • No cord-junction box provided for hard wiring • Steel hub/spider aluminum paddle blades • Coated steel guards • Meets OSHA standards • 1 year limited warranty Motor Specifications • All 1 Speed except 277V is 2 Speed • Totally enclosed, permanently lubricated • Ball bearing Standard Models GENERAL DESCRIPTION Hazardous Location Class I Group D Class II Group F & G Unassembled Head 240V / 480V 3-Phase Unassembled Head 277 Volt Assembled Head Wash down rated 120V / 240V 1-Phase Assembled Head MODEL UPC# 686334 SIZE ACH 24-EX1 855198 24” ACH 30-EX1 855204 30” ACH 24-EX3 855211 24” ACH 30-EX3 855228 30” ACH-24-TE3 855235 24” ACH-30-TE3 855242 30” IHP 24-H-277 854139 24” IHP 30-H-277 854221 30” IHP 20-H-WD 872195 20” IHP 24-H-WD 854184 24” IHP 30-H-WD 854191 30” MOTOR HP RPM 1/4 1725 1/4 1/3 1/3 1725 1125 1725 CFM 120v VOLTS HIGH LOW 1 ph 8000 120 or 240 5 1-phase 9200 240 or 480 3-phase 8000 240 or 480 3-phase 8000 277 1-phase 9200 9200 7000 5200 8200 6200 ---------- 9 AMPS (HIGH) WT. 240v 277v 240v 480v (LBS) LIST 1 ph 1 ph 3 ph 3 ph 66 992 2.6 ---------69 1076 ---- ---- ------- 1.4 1.4 1 ---- 0.7 0.7 ---- 7150 120 or 240 1-phase 8200 4.5 2.2 9350 ---- ---- 66 1058 69 1159 45 625 48 685 40 481 44 511 46 914 48 947 52 979 NOTE: Wash down rated fan heads have heavy zinc coated guards - Use FDA white coated mounts shown on page 18 for food service applications. Product Specifications • Pedestal pole adjusts the center of fan from 52” to 78” and bolts to 27” diameter steel dome base with 5 carriage bolts • I-beam mount & ceiling mount require 1 1/2” or longer pipe nipple for assembly (not supplied) • Pole mount attaches to 4”, 6”, or 8” with U-bolts (not supplied) Standard Models SUSPENSION MOUNT I-BEAM MOUNT CEILING MOUNT OPTIONAL WHEEL KIT WALL MOUNT CIRCULATOR MOUNT MODEL Pedestal Wall Mount I-Beam Mount Ceiling Mount Suspension Mount Pole Mount Optional Wheel Kit ACM-P ACM-W ACM-I ACM-C ACM-S ACM-PM ACM-WK PEDESTAL UPC# 686334 796187 796194 796200 796217 796224 868181 868136 SHIPPING WT. (LBS) 34 lbs. 3 lbs. 9 lbs. 3 lbs. 2 lbs. 5 lbs 4 lbs. LIST 162 61 120 66 54 85 78 TPI Commercial Circulators 10 These circulators should be used in clean and dry commercial applications - such as schools, shops, offices or warehouses. Commercial Circulator Motor, blades, guards, and mount are packed and shipped in a single UPS-able carton. Features • Pull chain switch. • SJT type 3 conductor, 9’ long cord. • Coated steel guards with retaining clips. • Steel hub/spider aluminum paddle blades. • Pole adjusts center of fan from 43” to 60”. • Meets OSHA standards. • 1 Year limited warranty. WALL MOUNT Motor Specifications PEDESTAL MOUNT • 1-Phase • 1/4 HP • Ball bearing • Open ventilated • 120V • 2-Speed • Permanently lubricated • Permanent split capacitor Standard Models CFM UPC# 686334 MODEL SIZE MOUNT TYPE AMPS HIGH HIGH 870627 CACU 24-P MED 5400 4900 LIST 63 340 LOW Pedestal Mount 24” WT. (LBS.) 4300 2.3 870641 CACU 24-W Wall Mount 43 290 869744 CACU 30-P Pedestal Mount 66 351 46 301 30” 870634 CACU 30-W 6000 Wall Mount Note: Stocked models may differ in appearance from photograph 5500 4800 2.4 36”, 42”, & 48” TPI Commercial Belt Drive Portable Blowers Feaures • Rocker switch • SJT type cord - 3 conductor - 8’ long • Aluminum blade • Spiral wire front and rear guards • Powder coated 20 gauge steel housing • 8” rubber wheels • Meets OSHA standards / 1 Year limited warranty Motor Specification • 2-Speed • 120V • Ball bearing • 1-Phase • ODP type • Permanently lubricated Standard Models UPC# 686334 MODEL MOTOR HP 870665 CPB 42-B 872270 CPB 48-B CFM MAX AMPS WT. (LBS.) LIST HIGH LOW 1/2 13,500 11,000 6.5 93 779 3/4 15,000 12,000 9.0 129 1053 *Photograph may not accurately represent stocked models 36” TPI Commercial Direct Drive Portable Blowers Feaures • Rocker switch • SJT type cord - 3 conductor - 6’ long • Spiral wire front and rear guards • Powder coated 20 gauge steel housing • 5” rubber wheels • Meets OSHA standards • 1 Year limited warranty SWIVEL CPBS 30-D Motor Specification • 2-Speed • 120 Volt, 1/3HP • Ball bearing • 1-Phase • Open ventilated • Permanently lubricated CPB 36-D UPC# 686334 MODEL 871037 872263 Standard Models CFM MAX AMPS CORD LENGTH SWITCH BLADES WT. (LBS.) LIST HIGH LOW CPBS 30-D 6,300 5,500 3.6 6’ ROCKER ALUMINUM 60 512 CPB 36-D 8,200 7,000 3.6 10’ ROTARY STEEL 70 557 11 36” & 42” TPI Industrial Direct Drive Portable Blowers Features • Comes in sizes 36" & 42" • Rocker switch • SJT type 3 conductor, 12’ long cord • Aluminum, 3 paddle blade • Spiral, wire front and rear guards • Corrosion and dent proof high density polyethylene housing • 8” wheels • 36” & 42” swivel model rotates 360° in 12 1/2° increments and locks in place with a steel locking pin • Meets OSHA standards • 1 Year limited warranty 12 STANDARD MODEL Motor Specifications • 120V, 1-Phase • 36”-1/3HP 42”-1/2HP • Ball bearing • Permanent split capacitor SWIVEL MODEL • 2-Speed on 36” model • 1-Speed on 42” model • Permanently lubricated Standard Models UPC# 686334 FAN MODEL SIZE TYPE CFM / RPM MOTOR HP 873048 PB 36-D 36” STANDARD 873055 PBS 36-D 36” SWIVEL 873079 PB 42-D 42” STANDARD 873086 PBS 42-D 42” SWIVEL HIGH AMPS (HIGH) LOW 1/3 12500 / 1040 9000 / 730 5.5 1/2 15,600 / 1040 6.0 SHIPPING WT.(LBS.) LIST 82 661 110 901 102 931 128 1142 48” TPI Industrial Direct Drive Portable Blowers Features • Corrosion and dent proof high density polyethylene housing • Rocker switch • SJT type 3 conductor, 12’ long cord • Steel, 2 paddle blade • Spiral, wire front and rear guards • 10” wheels • Swivel model rotates 360° in 12 1/2° increments and locks in place with a steel locking pin • Meets OSHA standards • 1 Year limited warranty Motor Specifications • 1-Phase • 120V • 3/4 HP • 1-Speed • Ball bearing • Permanently lubricated • Permanent split capacitor Features DIMENSIONS “D” “W” UPC# 686334 MODEL SIZE FAN TYPE MOTOR HP CFM \ RPM AMPS (High) “H” 799782 PB 48-D-OP 48” STANDARD 3/4 17,300 / 824 10.3 58.5 29 799805 PBS 48-D-OP 48” SWIVEL 3/4 17,300 / 824 10.3 ---- ---- SHIPPING WT.(LBS.) LIST 55.5 117 1412 ---- 142 1611 36”, 42”, & 48” TPI Industrial Belt Drive Portable Blowers Features • Comes in sizes 36”, 42”, and 48” • Rocker switch on 120V, Single Phase models • SJT type 3 conductor, 12’ long cord on 120V, Single Phase models / no cord on dual voltage models • Aluminum, 4 paddle blade • Spiral, wire front and rear guards • Corrosion and dent proof high density polyethylene housing • 10” wheels • Swivel model rotates 360° in 12 1/2° increments and locks in place with a steel locking pin • External junction boxes on dual voltage models allow units to be wired for either voltage without removing guards • Hazardous location models have explosion proof motors, metal housings, and external junction boxes rated for Class I, Group D and Class II, Groups E, F, & G, UL Listed • Meets OSHA standards • 1 year limited warranty Motor Specifications • 1-Speed • Ball bearing • Permanently lubricated STANDARD MODEL SWIVEL MODEL Standard Models STANDARD MODEL MOTOR MOTOR LISTING SIZE TYPE 36” SWIVEL MODEL UPC# 686334 MODEL WT. (LBS.) LIST UPC# 686334 MODEL WT. (LBS.) LIST HP CFM RPM AMPS 1/2 14,500 500 8.0 796477 PB 36-B 120 985 796507 PBS 36-B 145 1159 3/4 18,200 430 11.0 796484 PB 42-B 135 1124 796514 PBS 42-B 160 1334 1 22,700 390 15.0 796491 PB 48-B 155 1262 796521 PBS 48-B 180 1503 1/2 14,500 500 2.3 / 1.1 850865 PB 36-B-3 127 1316 850926 PBS 36-B-3 152 1550 3/4 18,200 430 3.3 / 1.5 850872 PB 42-B-3 143 1474 850933 PBS 42-B-3 168 1839 1 22,700 390 3.4 / 1.7 850889 PB 48-B-3 164 1677 850940 PBS 48-B-3 189 1935 1/2 14,500 500 7.8 / 3.9 850896 PB 36-B-HL 135 1982 850957 PBS 36-B-HL 160 2187 3/4 18,200 430 10.8 / 5.4 850902 PB 42-B-HL 150 2086 850964 PBS 42-B-HL 175 2493 1 22,700 390 13.2 / 6.6 850919 PB 48-B-HL 173 2446 850971 PBS 48-B-HL 198 2697 120 V 42” 1 PH ODP 48” 36” 42” 48” 36” 42” 48” 240/480 V 3 PH ODP 120/240 V 1 PH EXP 13 TPI Industrial Direct Drive Suspension Blower Features 14 • On-Off rocker switch • SJT type 3 conductor, 12’ long cord • Aluminum blade • Powder coated spiral wire front and rear guards • Corrosion and dent proof high density polyethylene housing • Spiral wire front and rear guards • Meets OSHA standards • 1 year limited warranty Motor Specifications • 2-Speed on 30” & 36” model • 120V., 1-Phase • 1-Speed on 42” model • Ball bearing • Permanent split capacitor • Permanently lubricated Standard Models SIZE MOTOR HP UPC# 686334 MODEL 30” 1/4 874885 36” 1/3 42” 1/2 CFM HIGH LOW RPM HIGH AMPS HIGH SHIPPING WT. (LBS.) LIST SB 30-D 7800 6000 1050 2.5 58 571 873062 SB 36-D 12500 9000 1050 5.6 70 661 873093 SB 42-D 825 7.9 99 931 16200 TPI Industrial Belt Drive Suspension Blower HL MODELS HAVE UL LISTED MOTOR Features • On-Off rocker switch on 120V, 1 phase models • SJT type 3 conductor, 12’ long cord on 120V, 1 phase models • No cord on dual voltage models • Aluminum blade • Powder coated front and rear guards • Corrosion and dent proof high density polyethylene housing • Powder coated spiral wire front and rear guards • Meets OSHA standards • 1 year limited warranty Motor Specifications • 120V., 1-Phase • 2-Speed on 30” & 36” model • Ball bearing • 1-Speed on 42” model • Permanent split capacitor • Permanently lubricated External junction boxes on dual voltage models allow units to be wired for either voltage without removing guards. Hazardous Location models have explosion proof motors and external junction boxes rated for Class I, Group D, & Class II, Groups E, F & G,. (Metal housing and no switch.) Standard Models UPC# 686334 MODEL SIZE 796552 796569 796576 850988 850995 851008 851015 851022 851039 SB 36-B SB 42-B SB 48-B SB 36-B-3 SB 42-B-3 SB 48-B-3 SB 36-B-HL SB 42-B-HL SB 48-B-HL 36” 42” 48” 36” 42” 48” 36” 42” 48” MOTOR TYPE 115 V 1 PH ODP 230 / 460 V 3 PH ODP 115 / 230 V 1 PH EXP HP 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 CFM RPM AMPS SHIP WT. (LBS.) LIST 14,500 18,200 22,700 14,500 18,200 22,700 14,500 18,200 22,700 500 430 390 500 430 390 500 430 390 8 11 15 2.3 / 1.1 3.3 / 1.5 3.8 / 1.9 7.8 / 3.9 10.8 / 5.4 13.2 / 6.6 120 135 155 127 143 164 135 150 173 985 1124 1262 1316 1592 1677 1982 2253 2446 TPI Industrial Mini-Blowers TOTALLY ENCLOSED MOTOR ALLOWS MINI-BLOWER TO BE USED IN DIRTY OR DUSTY ENVIRONMENTS. AVAILABLE AS FLOOR MODEL OR YOKE MOUNTED MODEL THAT CAN BE DIRECTLY BOLTED TO ANY SURFACE OR USED WITH OPTIONAL WALL/CEILING MOUNT. Features • Floor models have rotary switch • Yoke mounted models have pull chain switch • SJT type 3 conductor, 10’ long cord • Aluminum blade • Spiral, wire front and rear guards • Corrosion and dent proof high density polyethylene housing • Meets OSHA standards • 1 year limited warranty Motor Specifications • 1-Phase • 120V • 1/4 HP • 2-Speed • Ball bearing • Permanently lubricated • Totally enclosed • Permanent split capacitor Standard Models FLOOR MODEL MBM-W YOKE MOUNTED MODEL 874359 MB 24-DF FAN TYPE FLOOR STYLE 374366 MB 24-DY YOKE STYLE 874373 MB 30-DF FLOOR STYLE 874380 MB 30-DY YOKE STYLE 798907 MBM-W UPC# 686334 MODEL CFM / RPM HIGH LOW SIZE 24” 6800 / 1140 30” 7800 / 1040 DIMENSIONS “H” “W” “D” 29 1/2” 28 1/2” 14 1/4” 5000 / 1070 6000 / 730 29” 28 1/2” 14 1/4” 38 1/2” 37 1/2” 14 1/2” 38” 37 1/2” 14 1/2” AMPS (High) SHIPPING WT.(LBS.) LIST 52 571 52 571 58 631 58 631 4 115 2.2 2.5 OPTIONAL WALL/CEILING MOUNT FOR YOKE STYLE MINI-BLOWER Heavy Duty Square Belt Drive Portable Blowers Features • On-Off rocker switch • SJT type 3 conductor, 12’ long cord • Aluminum blade • Permanently lubricated bearings on blade drive shaft • Powder coated front and rear guards • Powder coated 20 gauge venturi • 18 gauge galvanized steel housing • Meets OSHA standards • 1 Year limited warranty Motor Specifications • 1-Phase • 120V • 1/2 Shaft • Ball bearing • 1-Speed • Drip proof motor • Permanently lubricated Standard Models 4” CASTERS SIZE UPC# 686334 MODEL 36” 868365 42” 48” MOTOR DIMENSIONS HP CFM RPM AMPS “H” “W” “D” WT. (LBS.) LIST PCBT 36-B 1/2 10,850 500 8.0 48 1/4” 28 1/4” 22 1/2” 120 1532 868372 PCBT 42-B 3/4 16,300 430 11.0 56 1/2” 34 1/4” 22 1/2” 140 1991 868389 PCBT 48-B 1 22,700 390 15.0 62 1/2” 40 1/4” 18 1/2” 185 2420 15 TPI Industrial Heavy Duty Direct Drive Blowers 16 LOW STAND MEDIUM STAND Features • Totally enclosed and explosion proof motors • Explosion proof motors are Class 1, Div 1, Group D and Class 2, Div 1, Groups F & G • Cast aluminum props • 14 Gauge steel body and stand • Acid resistant coating available • Baked enamel coating • 360° Swivel on high and medium stand units • Meets federal OSHA requirements • 1 year limited warranty NOTE: Single phase motors are field convertible 115V / 230V Three phase motors are field convertible 230V / 460V Motors are set to lower voltage at the factory unless a request is made at time of order to set to the higher voltage HIGH STAND Standard Models SIZE 18” 24” 30” 36” 42” 48” 60” MODEL HP RPM CFM DB’s @ 10’ MODEL NUMBER SUFFIX’S MCD18-1/4 1/4 1725 3050 74 MCD18-1/3 1/3 1725 3450 76 MCD18-1 1 1725 4600 77 MCD24-1/4 1/4 1725 5200 80 MCD24-1/3 1/3 1140 5300 74 MCD24-1/2 1/2 1725 6000 80 MCD24-3/4 3/4 1140 6900 74 MCD24-1 1 1725 7400 82 MCD24-1 1/2 1.5 1725 8200 84 MCD24-3 3 1725 10500 87 MCD30-1/3 1/3 1140 6900 80 MCD30-1/2 1/2 1725 8900 86 MCD30-3/4 3/4 1140 10400 80 MCD30-1 1 1140 11200 81 MCD30-1 1/2 1.5 1725 12000 92 MCD30-2 2 1140 14000 84 MCD30-3 3 1725 16000 94 MCD36-1 1 1140 13000 82 MCD36-1 1/2 1.5 1725 14850 88 MCD36-2 2 1140 17500 82 MCD36-3 3 1725 18500 90 MCD36-5 5 1725 23000 94 MCD42-2 2 1140 19500 85 MCD42-5 5 1725 27000 98 MCD48-5 5 1140 32000 92 MCD48-7 1/2 7.5 1140 37000 105 MCD48-10 10 1140 41000 105 MCD60-3 3 690 35000 87 MCD60-5 5 690 45000 87 MCD60-7 1/2 7.5 870 47000 90 MCD60-10 10 870 57200 91 MCD60-15 15 870 60750 92 SHIPPING WT. STAND LIST TEC LOW MED HIGH 1PH -L 103 145 210 2499 105 150 215 2584 117 165 230 2915 115 165 230 2557 126 175 250 2968 120 170 240 2771 140 190 260 3538 130 180 250 3006 137 190 255 3176 160 210 270 ---150 205 260 3256 141 195 250 3064 210 260 320 3747 200 260 310 4492 200 250 310 3458 225 270 330 ---220 265 325 ---250 320 375 5073 250 320 375 4012 255 325 380 ---260 330 390 ---260 330 390 ---315 415 565 ---320 420 570 ---500 620 710 ---625 745 835 ---682 800 890 ---690 855 965 ---730 895 1005 ---945 1110 1220 ---1035 1200 1310 ---1080 1245 1355 ---- 3PH -L-3 2488 2606 2808 2547 3000 2782 3202 2899 3037 3315 3288 3075 3416 3602 3320 3852 3527 4183 3874 4279 4087 4157 4913 4785 6491 7535 8819 13834 15560 13039 16231 21230 EXP 1PH -L 2877 3075 3458 2926 3772 3347 4012 3543 4695 ---4061 3640 4215 5356 4977 ------5936 5531 ---------------------------------------- TEC 3PH -L-3 2937 3202 3522 3000 3816 3288 3901 3607 3858 4194 4103 3581 4108 4263 4141 4796 4406 4838 4695 5227 4966 5121 5861 5755 8084 10173 11169 ---------------- 1PH -M 3080 3165 3501 3213 3623 3427 4194 3661 3832 ---3975 3789 4466 5216 4177 ------5963 4902 ---------------------------------------- Manual Starter Switches MODEL 1 PH SW-1/4 SW-1/2 SW-1 SW-1 1/2 ----------------- 3 PH SW-1/4-3 SW-1/2-3 SW-1-3 SW-1 1/2-3 SW-2-3 SW-3-3 SW-5-3 SW-7 1/2-3 H.P. RATING 1/4-1/3 1/2-3/4 1 1.5 2 3 5 7.5 LIST PRICE TEC 1 PH 3 PH 481 1149 481 1149 481 1149 1131 1149 ---1149 ---1149 ---1149 ---1091 EXP 3PH -M-3 3069 3182 3389 3208 3656 3437 3863 3554 3698 3970 4007 3799 4135 4326 4045 4577 4252 5078 4764 5174 4977 5046 5861 5734 7535 8580 9864 15805 17526 15006 18198 23196 1PH -M 3453 3656 4034 3581 4428 4001 4668 4199 5350 ---4780 4364 4940 6080 5701 ------6831 6421 ---------------------------------------- TEC 3PH -M-3 3522 3789 4103 3656 4471 3943 4557 4263 4513 4855 4828 4306 4833 4982 4865 5521 5131 5734 5585 6117 5861 6011 6805 6698 9128 11217 12208 ---------------- 1PH -H 3362 3447 3783 3442 3852 3656 4423 3890 4061 ---4263 4072 4748 5499 4460 ------6150 5089 ---------------------------------------- 3PH -H-3 3351 3464 3672 3288 3736 3522 3943 3634 3778 4055 4295 4081 4417 4609 4326 4860 4535 5260 4951 5356 5163 5227 6235 6112 8200 9245 10525 16258 17984 15459 18656 23654 EXP 1PH -H 3741 3943 4321 3810 4657 4231 4897 4428 5579 ---5062 4646 5222 6362 5984 ------7012 6607 ---------------------------------------- 3PH -H-3 7573 7136 4386 3885 4700 4172 4785 4492 4742 5078 5111 4588 5116 5265 5147 5803 5409 5915 5772 6304 6043 6192 7183 7082 9795 11878 12875 ---------------- Polyolifin Casters WHEEL SHIPPING SIZE WT. (LBS) MODEL FAN SIZE LIST CAS - 18 18” - 30” 4” 10 461 CAS - 48 36” - 48” 6” 14 649 (FOR LOW & MEDIUM STAND) 4 CASTERS - 2 LOCKING TPI Industrial Heavy Duty Permanent Mount Direct Drive Blowers 2-WAY SWIVEL 1-WAY SWIVEL Features • Front and rear spiral guards • Explosion proof motors are Class 1, Div 1, Group D and Class 2, Div 1, Groups F & G • Cast aluminum props • 14 gauge steel body and stand • Meets federal OSHA requirements • 1 year limited warranty NOTE: Single Phase motors are field convertible 115V / 230V Three Phase motors are field convertible 230V / 460V Motors are set to lower voltage at the factory unless a request is made at time of order to set to the higher voltage Standard Models BLADE SIZE 18” 24” 30” 36” MODEL DB’S HP RPM CFM @ 10’ SHIPPING WT. 1-WAY 2-WAY SWIVEL SWIVEL MODEL NUMBER SUFFIX’S MCD18-1/4 1/4 1725 3050 74 130 140 MCD18-1/3 1/3 1725 3450 76 135 145 MCD18-1 1 1725 4600 77 145 155 MCD24-1/4 1/4 1725 5200 80 145 155 MCD24-1/3 1/3 1140 5300 74 155 165 MCD24-1/2 1/2 1725 6000 80 150 160 MCD24-3/4 3/4 1140 6900 74 170 180 MCD24-1 1 1725 7400 82 160 170 MCD24-1 1/2 1.5 1725 8200 84 165 175 MCD24-3 3 1725 10500 87 190 200 MCD30-1/3 1/3 1140 6900 80 180 190 MCD30-1/2 1/2 1725 8900 86 170 180 MCD30-3/4 3/4 1140 10400 80 240 250 MCD30-1 1 1140 11200 81 230 240 MCD30-1 1/2 1.5 1725 12000 92 230 240 MCD30-2 2 1140 14000 84 255 265 MCD30-3 3 1725 16000 94 250 260 MCD36-1 1 1140 13000 82 295 305 MCD36-1 1/2 1.5 1725 14850 88 295 305 MCD36-2 2 1140 17500 82 300 310 MCD36-3 3 1725 18500 90 315 325 MCD36-5 5 1725 23000 94 305 315 Minute air change chart for Commercial and Industrial Applications. Place Assembly Auditoriums Bakeries Banks Bars Barns Boiler Rooms Bowling Alley Cafeteria Churches Classrooms Compressor Rooms Dance Halls Dairies Dormitories Dry Cleaning Plant Typical (6) (6) (2) (6) (4) (15) (2) (3) (4) (6) (6) (2) (6) (4) (6) (3) Range 2-10 1-20 1-3 3-10 2-5 10-20 1-3 1-5 3-5 2-10 4-8 1-3 2-10 2-5 4-8 1-5 LIST PRICE 1-WAY SWIVEL TEC EXP 1PH 3PH 1PH 3PH -T -T-3 -T -T-3 3315 3304 3687 3752 3400 3416 3890 4018 3730 3623 4268 4337 3416 3400 3783 3858 3826 3858 4631 4673 3629 3640 4204 4146 4397 4066 4871 4758 3863 3756 4401 4466 4028 3896 5552 4716 ---4172 ---5051 4146 4177 4951 4993 3954 3965 4535 4471 4636 4301 5111 4998 5382 4492 6251 5153 4348 4210 5867 5031 ---4742 ---5686 ---4417 ---5302 6181 5287 7045 5941 5111 4977 6634 5797 ---5382 ---6331 ---5190 ---6070 ---5254 ---6224 2-WAY SWIVEL TEC EXP 1PH 3PH 1PH 3PH -S -S-3 -S -S-3 4161 4152 4540 4604 4247 4263 4742 4871 4582 4471 5121 5185 4306 4290 4668 4742 4711 4742 5516 5558 4513 4530 5089 5031 5281 4951 5755 5648 4748 4642 5287 5350 4918 4780 6437 5601 ---5057 ---5936 5127 5158 5926 5973 4935 4945 5510 5451 5612 5281 6086 5979 6362 5472 7226 6128 5329 5190 6847 6011 ---5723 ---6666 ---5392 ---6277 7396 6501 8260 7161 6331 6192 7849 7012 ---6602 ---7546 ---6405 ---7285 ---6475 ---7439 Exhaust Ventilation Guide Place Engine Rooms Factories Foundries Garages Generating Plants Glass Plants Gymnasiums Hallways Kitchens (Comm.) Laboratories Libraries Laundries Locker Rooms Machine Shops Markets CFM Required for Ventilation = Typical (3) (7) (5) (7) (4) (2) (6) (8) (3) (3) (4) (2) (6) (4) (6) Range 1-5 4-10 2-8 4-10 2-5 1-3 2-10 4-12 1-5 1-5 2-5 1-3 2-10 2-5 2-10 Building Cubic Feet Minutes Per Air Change Place Mills Packing Houses Plants Plating Plants Print Shops Restaurants Rest Rooms Schools Stores Theaters Transformer Rooms Turbine Rooms Waiting Rooms Warehouses Welding Rooms Typical (4) (4) (7) (4) (7) (6) (7) (7) (7) (6) (3) (4) (12) (7) (3) Range 2-5 3-5 4-10 2-5 4-10 2-10 4-10 4-10 4-10 4-8 1-5 2-5 10-15 4-10 1-4 17 Confined Space Blowers Gasoline Powered Centrifugal Blower 18 Features • Powder coated steel housing with 10 gauge steel base • Vibration absorbing spring mounted feet • 8” inlet and outlet • Uses standard 8” flexible duct • Length: 18” - Width: 16” - Height: 29” • 2 year limited warranty May be used in Exhaust Air or Supply Air applications. Standard Models UPC# 686334 MODEL 867962 CSB-8CG-H CFM GASOLINE ENGINE HP HONDA 4 OUTLET One 90o Bend Two 90o Bends 1350 1050 775 WEIGHT (LBS) LIST 53 lbs. 2211 Electric Powered Axial Blower With Built-In Hose Canister Features • Rugged plastic housing • Single speed, 115V, totally enclosed motor • 15” inlet and 8” outlet • Uses standard 8” flexible duct • Length: 17” - Width: 16” - Height: 17” • 1 year limited warranty May be used in Supply Air applications. CSB-8AE-MC Standard Models CFM UPC# 686334 MODEL 868006 CSB-8AE-MC HP 1/3 AMPS 3.0 OUTLET o ONE 90 BEND TWO 90 BENDS 1373 740 630 o WEIGHT (LBS.) LIST 33 lbs. 1421 Accessories - Hoses Standard Models UPC# 686334 MODEL DIAMETER LENGTH FABRIC WT. WEIGHT (LBS) LIST 868044 DUCT-8-25 8” 25’ 13 oz./ yd. 10 313 Accessories-Carriers Standard Models UPC# 686334 MODEL HOSE LENGTH HOSE WIDTH LIST 868013 HC-8A UP TO 25’ 8”-10” 135 Tubeaxial Belt Drive Duct Fans Features Options • Companion flanges • Protective coating • Access doors • Eliminates fumes and vapors from paint spray booths and other hazardous areas • Totally enclosed and explosion proof motors • 1-Phase motors are field convertible 115V/230V • 3-Phase motors are field convertible 230V/460V • Motors are set to lower voltage at the factory unless a request is made at time of order to set them to the higher voltage • Explosion proof motors are Class 1, Div 1, Group D and Class 2, Div 1, Groups F & G • Recommended for most paint spray applications because motor is out of air • 14 gauge steel drum including mounting flanges at each end • Completely enclosed belt and ball bearing housing • Adjustable motor base for proper belt tension • Rugged cast aluminum blade, non-sparking • Fan can be mounted to operate in any position • 1 year limited warranty • Belt guards • Motor covers • Fan guards Standard Models BLADE SIZE 12” 15” 18” 24” 27” 30” 34” 42” 48” 1-PHASE 3-PHASE 115/230V-60Hz 230/460v-60Hz MODEL TXB12-1/4 TXB12-1/4-3 TXB12-1/3 TXB12-1/3-3 TXB12-1/2 TXB12-1/2-3 TXB12-3/4 TXB12-3/4-3 TXB15-1/4 TXB15-1/4-3 TXB15-1/3 TXB15-1/3-3 TXB15-1/2 TXB15-1/2-3 TXB15-3/4 TXB15-3/4-3 TXB18-1/4 TXB18-1/4-3 TXB18-1/3 TXB18-1/3-3 TXB18-1/2 TXB18-1/2-3 TXB18-1 TXB18-1-3 TXB18-1 1/2 TXB18-1 1/2-3 TXB24-1/2 TXB24-1/2-3 TXB24-3/4 TXB24-3/4-3 TXB24-1 TXB24-1-3 TXB24-1 1/2 TXB24-1 1/2-3 TXB24-2 TXB24-2-3 -----TXB24-3-3 TXB27-3/4 TXB27-3/4-3 TXB27-1 TXB27-1-3 TXB27-1 1/2 TXB27-1 1/2-3 TXB27-2 TXB27-2-3 TXB30-1/2 TXB30-1/2-3 TXB30-1 TXB30-1-3 TXB30-1 1/2 TXB30-1 1/2-3 TXB30-2 TXB30-2-3 -----TXB30-3-3 -----TXB30-5-3 TXB34-1 1/2 TXB34-1 1/2-3 TXB34-2 TXB34-2-3 -----TXB34-3-3 -----TXB34-5-3 TXB42-1 1/2 TXB42-1 1/2-3 TXB42-2 TXB42-2-3 -----TXB42-3-3 -----TXB42-5-3 -----TXB48-5-3 -----TXB48-7 1/2-3 HP RPM BLADES 1/4 1/3 1/2 3/4 1/4 1/3 1/2 3/4 1/4 1/3 1/2 1 1.5 1/2 3/4 1 1.5 2 3 3/4 1 1.5 2 1/2 1 1.5 2 3 5 1.5 2 3 5 1.5 2 3 5 5 7.5 2625 2875 3450 3450 2000 2200 1890 2200 1600 1725 1890 1725 1990 1298 1600 1725 1540 1600 1725 1250 1400 1600 1350 1140 1298 1035 1176 1350 1650 1170 1027 1175 1416 750 820 890 850 800 900 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 4 4 4 6 6 6 C.F.M - STATIC PRESSURE 0” 1444 1586 1875 2044 2600 2950 3350 3900 3050 3375 3850 4600 5350 5643 6906 7425 8200 9760 10500 8330 9400 10700 11500 8900 9867 11100 12100 13480 16440 13695 14657 17580 20500 18960 20700 23700 26900 33000 37000 1/4” 1033 1135 1400 1920 1700 2100 2650 3400 2000 2600 3100 4080 4830 4826 5900 6350 7650 8830 9500 7550 8480 9700 10700 6660 7980 9700 11000 12498 15242 11100 12590 15896 19000 14662 17002 20200 24403 29000 34500 1/2” 380 415 1250 1650 1000 1500 2700 1400 2000 3000 3950 3500 4650 5000 6850 8090 8700 6500 7300 8375 9300 2300 4120 7500 9322 11465 13982 6000 10000 14095 17500 7200 11400 16970 22250 25600 31000 3/4” ------1100 1500 ---------1150 ---------2100 3000 ---2750 3300 5500 7000 7800 4650 5200 6000 8000 ------3500 6700 10380 12659 1015 8000 12000 16000 ---4000 9950 18400 20000 27000 Db’s WT @10’ (LBS) 77 78 83 83 77 78 76 78 76 77 78 77 80 78 80 84 81 82 86 78 82 84 81 79 82 78 81 84 88 82 81 85 88 78 80 82 82 85 87 62 65 65 67 67 69 75 85 80 85 95 105 105 120 130 140 145 170 190 150 155 170 210 140 150 165 215 215 230 190 240 260 305 250 260 260 270 375 520 LIST TEC EXP 1 PH 3 PH 1 PH 3 PH 2046 2035 2431 2494 2088 2109 2589 2721 2088 2088 2573 2790 2272 2272 2748 2947 2252 2241 2636 2700 2320 2336 2816 2947 2389 2399 2979 2916 2600 2462 3190 3042 2378 2367 2763 2826 2404 2441 2921 3053 2494 2505 3084 3021 2847 2715 3390 3443 2979 2841 4535 3681 2704 2715 3295 3232 2953 2816 3543 3396 2979 2863 3543 3596 3622 3485 5172 4323 4118 3675 5298 4513 ---3791 ---4693 3617 3474 4202 4060 3639 3527 4202 4250 3802 3664 5351 4497 4239 3796 5426 4640 3421 3438 4012 3955 3796 3686 4360 4413 3959 3822 5510 4661 4334 3891 5520 4735 ---4149 ---5046 ---4197 ---5178 4577 4440 6127 5273 5099 4656 6279 5499 ---4777 ---5673 ---4808 ---5800 5589 5452 7139 6285 5984 5541 7171 6380 ---5657 ---6553 ---5953 ---6939 ---8826 ---9812 ---9374 ---11035 Dimensions SIZE 12” 15” 18” 24” 27” 30” 34” 42” 48” HOUSING INNER DIMENSION HOUSING OUTER DIMENSION 12” 15” 18” 24” 27” 30” 34” 42” 48” 14” 17” 20” 27” 30” 33” 37” 45” 51” BOLT HOLE CENTERS HOUSING DEPTH 13 1/8” 16 1/8” 19 1/8” 25 3/4 “ 28 3/4” 31 3/4” 35 3/4” 43 9/16” 49 5/8” 12” 12” 12” 12” & 16” 16” 16” 16” 18” 24” 19 Tubeaxial Direct Drive Duct Fans Features • Totally enclosed and explosion proof motors • 1-Phase motors are field convertible 115V/230V • 3-Phase motors are field convertible 230V/460V • Motors are set to lower voltage at the factory unless a request is made at time of order to set them to the higher voltage • Explosion proof motors are Class 1, Div 1, Group D and Class 2, Div 1, Groups F & G • 14 Gauge steel drum including mounting flanges • Fan can be mounted to operate in any position • Rugged cast aluminum blade, non-sparking • Fan can be mounted to operate in any position • 1 year limited warranty Options • Companion flanges • Fan guards • Protective coating • Access doors 20 Dimensions SIZE 12” 18” 24” 27” 30” 34” 42” 48” HOUSING HOUSING BOLT HOLE HOUSING I.NNER OUTER CENTERS DEPTH DIM. DIM. 12” 14” 13 1/8” 14” 18” 20” 19 1/8” 14” 24” 27” 25 3/4 “ 18” 27” 30” 28 3/4” 18” 30” 33” 31 3/4” 18” 34” 37” 35 3/4” 18” 42” 45” 43 9/16” 18” 48” 51” 49 5/8” 18” Standard Models BLADE SIZE 12” 18” 24” 27” 30” 34” 36” 42” 48” 1-PHASE 115/230V 3-PHASE 230/460v HP MODEL TXD12-1/4 TXD12-1/2 TXD12-3/4 TXD18-1/4 TXD18-1/3 TXD18-1/2 TXD18-1 TXD24-1/4 TXD24-1/3 TXD24-1/2 TXD24-3/4 TXD24-1 TXD24-2 -----TXD27-1/2 TXD27-1 TXD27-2 TXD30-1/2 TXD30-3/4 TXD30-2 -----TXD34-1 1/2 TXD34-2 ----------TXD36-2 ----------TXD42-2 --------------------- TXD12-1/4-3 TXD12-1/2-3 TXD12-3/4-3 TXD18-1/4-3 TXD18-1/3-3 TXD18-1/2-3 TXD18-1-3 TXD24-1/4-3 TXD24-1/3-3 TXD24-1/2-3 TXD24-3/4-3 TXD24-1-3 TXD24-2-3 TXD24-3-3 TXD27-1/2-3 TXD27-1-3 TXD27-2-3 TXD30-1/2-3 TXD30-3/4-3 TXD30-2-3 TXD30-3-3 TXD34-1 1/2-3 TXD34-2-3 TXD34-3-3 TXD34-5-3 TXD36-2-3 TXD36-3-3 TXD42-1-3 TXD42-2-3 TXD42-3-3 TXD42-5-3 TXD48-3-3 TXD48-5-3 1/4 1/2 3/4 1/4 1/3 1/2 1 1/4 1/3 1/2 3/4 1 2 3 1/2 1 2 1/2 3/4 2 3 1.5 2 3 5 2 3 1 2 3 5 3 5 C.F.M - STATIC PRESSURE RPM BLADES 1725 3450 3450 1725 1725 1725 1725 1725 1140 1725 1140 1725 1725 1725 1725 1725 1725 1725 1140 1725 1725 1725 1725 1140 1725 1140 1725 870 1140 1140 1140 1140 870 4 4 6 4 6 6 6 2 6 4 6 6 6 6 4 4 6 4 6 6 6 4 4 3 6 6 4 4 4 4 4 4 4 0” 1/4” 1/2” 3/4” 1180 1875 2044 3450 3375 4150 4600 5200 4975 6510 6900 7425 9525 10500 7550 9600 11500 8980 10440 12000 16000 13350 14850 19300 21000 17620 18500 15800 17964 24500 28970 28600 33000 520 1400 1920 2500 2600 3150 4080 2820 4250 5200 6265 6350 8810 9500 6000 8400 10700 6300 8750 10450 14700 10000 12100 17230 18900 15200 15700 13480 15326 23000 26840 24400 29750 ---1250 1650 ---1400 1700 3000 ---2850 3100 3300 5000 7980 8700 4000 7050 9300 4350 6000 8700 12900 7300 8800 14800 17500 12300 13900 5800 12351 19650 24200 20000 25300 ---1100 1500 ---------2100 ------1800 ---3300 6960 7800 2000 4800 8000 2300 ---6000 10200 ---4000 11614 14850 8500 11500 900 7600 14000 19500 15900 18000 Db’s @ 10’ WT. Lbs. 77 82 83 74 75 77 80 80 74 80 74 82 84 86 86 86 86 86 80 89 89 88 89 86 91 84 89 81 87 87 87 94 86 40 45 45 55 65 65 70 95 110 115 125 120 120 130 125 155 165 130 150 155 175 175 200 250 220 210 230 270 260 260 300 290 500 LIST TEC EXP 1 PH 3 PH 1 PH 3 PH 1517 1560 1618 1792 1881 1955 2203 1966 2366 2172 2935 2408 2915 ---2372 2571 3136 2467 3316 3226 ---3316 3673 ------------------------------- 1502 1555 1618 1777 1898 1966 2097 1955 2403 2182 2609 2298 2482 2699 2377 2467 2703 2478 2988 2793 2920 3178 3241 4200 3452 3600 4006 4353 4101 4595 4765 5729 7284 1887 2108 2251 2161 2361 2525 2751 2335 3162 2741 3400 2957 4063 ---2935 3120 4284 3036 3784 4374 ---4822 4822 ------------------------------- 1950 2346 2425 2224 2493 2467 2798 2350 3210 2683 3294 3005 3299 3568 2877 3168 3521 2978 3689 3610 3795 3990 4059 5302 4412 4538 5107 ---5033 5697 6341 6830 ---- Duct Fan Guards Standard Models Features • Enamel finish • Can be used as front or rear guards. (Rear guard for TXD models must be ordered with fan) FAN SIZE MODEL LIST FAN SIZE MODEL LIST 12” TXG-12 132 30” TXG-30 181 15” TXG-15 132 34” TXG-34 231 18” TXG-18 132 36” TXG-36 238 24” TXG-24 144 42” TXG-42 262 27” TXG-27 181 48” TXG-48 343 Shutter Mounted Direct Drive Exhaust Fans Features 21 • Can be installed from inside wall • Eliminates need for external framing and shutter • Pull chain switch • No Cord-Junction box provided for direct wiring • Aluminum blade • Steel spiral wire guards Motor Specifications • 120V, 1 phase, totally enclosed, permanently lubricated • 1/12 HP motor is 3-Speed sleeve bearing shaded pole type • 1/8 HP motor is 3-Speed sleeve bearing permanent split capacitor • 1/4 HP motor is 2-Speed ball bearing permanent split capacitor Note: Rough-in hole size is 1/2” inch larger than fan blade size Standard Models CFM / RPM FAN SIZE UPC# 686334 MODEL 10” 868990 CE 10-DS 12” 798624 14” HP AMPS HIGH WT. (LBS) LIST HIGH MED LOW 1/12 680 / 1560 540 / 1250 460 / 1080 1 11 277 CE 12-DS 1/12 825 / 1560 710 / 1250 560 / 1080 1.1 16 313 869003 CE 14-DS 1/8 1520 / 1660 1400 / 1550 1250 / 1370 2 17 397 16” 869010 CE 16-DS 1/8 2100 / 1660 1900 / 1550 1700 / 1370 2.1 18 415 18” 798631 CE 18-DS 1/8 2300 / 1660 2100 / 1050 1850 / 1370 2.2 25 451 20” 869027 CE 20-DS 1/4 2925 / 1140 - 2380 / 1070 2.3 34 535 24” 798648 CE 24-DS 1/4 3400 / 1140 - 2770 / 1070 2.5 47 596 30” 798655 CE 30-DS 1/4 3950 / 1140 - 3080 / 1070 2.7 54 746 Dimensions (Inches) SIZE DEPTH DIMENSIONS “A” “B” DEPTH 6.125 MAX OPEN CE SHUTTER REAR VIEW “C” 10” 5.81” 13.125” 10” 12.375” 12” 7.18” 15.125” 12” 14.375” 14” 7.18” 17.125” 14” 16.375” 16” 7.18” 19.125” 16” 18.250” 18” 7.18” 21.125” 18” 21.750” 20” 7.18” 23.125” 20” 2.686” 24” 7.18” 27.125” 24” 27.750” 30” 7.18” 33.125” 30” 33.750” "A" +/-.3125 0.312 SQUARE 4 PLS. SPACED 90 DEGREES APART 1.563 .785 TYP +/-.03125 "B" +/-.03125 3.500 TYP. +/-.03125 2.375 +/-.03125 "C" 3.500TYP. +/-.03125 Guard Mounted Direct Drive Exhaust Fans 22 Features • Bolts directly to the wall • Can be used with or without external shutter • Pull chain switch • No Cord-Junction box provided for direct wiring • Aluminum blade • Steel spiral wire guards Note: Rough-in hole size is 1/2” inch larger than fan blade size Motor Specifications • 120V, 1-Phase, totally enclosed, permanently lubricated • 1/12 HP motor is 3-Speed sleeve bearing shaded pole type • 1/8 HP motor is 3-Speed sleeve bearing permanent split capacitor • 1/4 HP motor is 2-Speed ball bearing permanent split capacitor Standard Models FAN SIZE UPC# 686334 MODEL HP 10” 868952 CE 10-D 12” 798501 14” CFM / RPM HIGH MED LOW AMPS HIGH WT. (LBS) LIST 1/12 680 / 1560 540 / 1250 460 / 1080 1 11 235 CE 12-D 1/12 825 / 1560 710 / 1250 560 / 1080 1.1 12 265 868969 CE 14-D 1/8 1520 / 1660 1400 / 1550 1250 / 1370 2 17 282 16” 868976 CE 16-D 1/8 2100 / 1660 1900 / 1550 1700 / 1370 2.1 18 295 18” 798495 CE 18-D 1/8 2300 / 1660 2100 / 1050 1850 / 1370 2.2 19 324 20” 868983 CE 20-D 1/4 2925 / 1140 - 2380 / 1070 2.3 34 421 24” 798488 CE 24-D 1/4 3400 / 1140 - 2770 / 1070 2.5 38 469 30” 798471 CE 30-D 1/4 3950 / 1140 - 3080 / 1070 2.7 42 547 Dimensions (Inches) BOLT HOLE CENTER WIDTH SIZE BOLT HOLE CENTER WIDTH DEPTH 10” 14.14” 5.81” 12” 16.46” 7.18” 14” 18.30” 7.18” 16” 20.34” 7.18” 18” 22.64” 7.18” 20” 25.46” 7.18” 24” 29.08” 7.18” 30” 34.89” 7.18” DEPTH Optional Wall Shutters FAN SIZE 10” 12” 14” 16” 18” 20” 24” 30” UPC# 686334 868433 798556 868457 851473 798563 797528 798570 798587 MODEL CES-10G CES-12G CES-14G CES-16G CES-18G CES-20G CES-24G CES-30G WT. (LBS) 5 5.5 6.5 8 9 10 13 19 LIST 61 85 103 120 145 162 181 211 Venturi Mounted Direct Drive Exhaust Fans Features 23 • Can be installed from inside wall • Can be used with external shutter • Pull chain switch • No Cord-Junction box provided for direct wiring • Aluminum blade • Steel spiral wire guards Motor Specifications • 120V, 1-Phase, totally enclosed, permanently lubricated • 1/12 HP motor is 3-Speed sleeve bearing shaded pole type • 1/8 HP motor is 3-Speed sleeve bearing permanent split capacitor • 1/4 HP motor is 2-Speed ball bearing permanent split capacitor Note: Rough-in hole size is 1/2” inch larger than fan blade size Standard Models FAN SIZE UPC# 686334 MODEL HP 10” 869034 CE 10-DV 12” 798662 CE 12-DV CFM / RPM AMPS HIGH WT. (LBS) LIST HIGH MED LOW 1/12 680 / 1560 540 / 1250 460 / 1080 1 11 277 1/12 825 / 1560 710 / 1250 560 / 1080 1.1 17 313 14” 869041 CE 14-DV 1/8 1520 / 1660 1400 / 1550 1250 / 1370 2 17 397 16” 869058 CE 16-DV 1/8 2100 / 1660 1900 / 1550 1700 / 1370 2.1 18 415 18” 798679 CE 18-DV 1/8 2300 / 1660 2100 / 1050 1850 / 1370 2.2 26 451 20” 869065 CE 20-DV 1/4 2925 / 1140 - 2380 / 1070 2.3 34 535 24” 798686 CE 24-DV 1/4 3400 / 1140 - 2770 / 1070 2.5 48 596 30” 798693 CE 30-DV 1/4 3950 / 1140 - 3080 / 1070 2.7 55 746 Dimensions (Inches) SIZE FAN DEPTH DIMENSIONS DEPTH “A” “B” “C” “D” “E” 10” 5.81” 10.250” 12.63” 12.375” 2.000” 12.875” 12” 7.18” 12.250” 14.50” 14.375” 2.000” 14.625” 14” 7.18” 14.250” 17.13” 16.375” 2.500” 17.375” 16” 7.18” 16.250” 19.13” 18.250” 2.875” 20.000” 18” 7.18” 18.125” 21.00” 21.750” 2.750” 22.875” 20” 7.18” 20.250” 23.13” 23.686” 2.750” 25.625” 24” 7.18” 24.250” 29.50” 27.750” 2.875” 27.875” 30” 7.18” 30.250” 33.50” 33.750” 2.875” 33.875” "D" REAR VIEW (FAN REMOVED) 90.0 ° 0.828 TYP 8EA 45.0° 0.312 SQ 4EA SPACED 90*APART "A" I.D. 4.375 TYP 8EA "C" "E" B.H.C. "B" SQUARE 0.2073 Optional Wall Shutters FAN SIZE UPC# 686334 MODEL 10” 12” 14” 16” 18” 20” 24” 30” 868433 798556 868457 851473 798563 797528 798570 798587 CES-10G CES-12G CES-14G CES-16G CES-18G CES-20G CES-24G CES-30G DIMENSIONS WIDTH LENGTH WT. (LBS) LIST 13.13” 15.13” 17.13” 19.00” 21.13” 23.13” 27.13” 33.13” 13.13” 15.13” 17.13” 19.00” 21.13” 23.13” 27.13” 33.13” 5.0 5.5 6.5 8.0 9.0 10.0 13.0 19.0 61 85 103 120 145 162 181 211 Commercial Exhaust Fans & Shutters 24 Belt-Drive Exhaust Fan Features • 120V, 1 phase or 230 / 460V, 3-Pphase, ball bearing, permanently lubricated, drip proof motor • Permanently lubricated bearings on blade drive shaft • Aluminum blade • Powder coated venturi and blade • 1725 RPM • Motor frame size 56 • 5/8” shaft • 1 year warranty Dimensions (Inches) A C B D MODEL DIMENSIONS A x B x C x D CE-24B 29.5” x 28” x .75” x 17” CE-30B 35.5” x 34” x .75” x 17” CE-36B 41.5” x 40” x .75” x 17” CE-42B 48” x 48” x .75” x 17” CE-48B 54” x 54” x .75” x 17” Standard Models 115V 1Ph SIZE AMPS MOTOR HP 115V 230/460V CFM WT. (LBS) 230/460V 3Ph UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST 24 1/3 5 1.9 / .9 3270 50 796705 CE-24B 673 851046 CE-24B-3 775 30 1/3 6 1.9 / .9 7730 60 796712 CE-30B 758 851053 CE-30B-3 866 36 1/2 8 2.3 / 1.1 9870 65 796729 CE-36B 877 851060 CE-36B-3 980 42 3/4 11 3.3 / 1.5 14800 75 796736 CE-42B 1100 851077 CE-42-B-3 1365 48 1 15 3.8 / 1.9 21500 98 796743 CE-48B 1376 851084 CE-48-B-3 1454 Optional Exhaust Shutters Features • Air open - gravity close • Aluminum frame • Aluminum blade • Weather stripping for tighter seal Standard Models UPC# 686334 MODEL SHIPPING WT.(LBS.) LIST 796750 CES-24 20 228 796767 CES-30 28 279 796774 CES-36 34 491 796781 CES-42 55 620 796798 CES-48 64 718 Shutter Dimensions (Inches) Standard Models A MODEL C B (A) Thickness (B) Blade Housing Size (C) Overall Size OVERALL DIMENSIONS AxCxC WALL HOLE SIZE BxB CES-24 3” x 27” x 27” 25” x 25” CES-30 3” x 33” x 33” 31” x 31” CES-36 3” x 39” x 39” 37” x 37” CES-42 3” x 45” x 45” 43” x 43” CES-48 3” x 51” x 51” 49” x 49” Heavy Duty Belt Drive Exhaust Fans Features • Totally enclosed and explosion proof motors - Explosion proof motors are Class 1, Div 1 Group D and Class 2, Div 1, Groups F & G • Fans are shipped completely assembled • Heavy gauge steel blades on TEC models • Cast aluminum blades on EXP explosion proof models • 14 gauge steel panel with welded steel pipe bracing • 1 year limited warranty Options • CES Shutters • EMF Front Guards • IBG Rear Guards BLADE SIZE 24” 30” 36” 42” 48” 60” 25 • Acid Resistant Coating • Reversed Air Flow • Flat Front Venturi Standard Models MODEL 1-PHASE 3-PHASE 115/230V-60Hz 230/460v-60Hz EHB24-1/4 EHB24-1/4-3 EHB24-1/2 EHB24-1/2-3 EHB24-3/4 EHB24-3/4-3 EHB24-1 EHB24-1-3 EHB30-1/4 EHB30-1/4-3 EHB30-1/3 EHB30-1/3-3 EHB30-1/2 EHB30-1/2-3 EHB30-3/4 EHB30-3/4-3 EHB30-1 EHB30-1-3 EHB30-1 1/2 EHB30-1 1/2-3 EHB36-1/3 EHB36-1/3-3 EHB36-1/2 EHB36-1/2-3 EHB36-3/4 EHB36-3/4-3 EHB36-1 EHB36-1-3 EHB36-1 1/2 EHB36-1 1/2-3 EHB36-2 EHB36-2-3 EHB42-1/3 EHB42-1/3-3 EHB42-1/2 EHB42-1/2-3 EHB42-3/4 EHB42-3/4-3 EHB42-1 EHB42-1-3 EHB42-1 1/2 EHB42-1 1/2-3 EHB42-2 EHB42-2-3 EHB42-3-3 ---EHB48-1/2 EHB48-1/2-3 EHB48-3/4 EHB48-3/4-3 EHB48-1 EHB48-1-3 EHB48-1 1/2 EHB48-1 1/2-3 EHB48-2 EHB48-2-3 EHB48-3-3 ---EHB48-5-3 ---EHB60-1 EHB60-1-3 EHB60-1 1/2 EHB60-1 1/2-3 EHB60-2 EHB60-2-3 EHB60-3-3 ---EHB60-5-3 ---- PANEL SIZE (Sq.) 30” 36” 42” 48” 54” 66” HP 1/4 1/2 3/4 1 1/4 1/3 1/2 3/4 1 1 1/2 1/3 1/2 3/4 1 1 1/2 2 1/3 1/2 3/4 1 1 1/2 2 3 1/2 3/4 1 1 1/2 2 3 5 1 1 1/2 2 3 5 RPM 780 980 1140 1250 540 595 640 770 975 1140 460 530 605 665 720 870 335 390 435 490 550 725 830 330 370 410 465 520 680 800 280 340 390 450 540 CFM 0” SP db’s @ 10” WT. (LBS) 4900 6219 7090 7180 7178 7909 8507 10235 10668 12473 9113 10500 11985 13174 13660 16554 10614 12343 14040 15429 17420 20653 23645 15230 17339 19188 21731 24274 28150 33160 23090 28068 32200 37183 44600 60 66 71 73 61 63 64 66 70 77 64 66 68 70 72 74 64 65 67 69 71 74 79 69 70 71 72 74 80 83 76 77 78 84 86 100 130 140 140 140 150 155 165 170 180 160 180 200 200 210 215 205 210 225 230 240 245 250 190 195 235 245 250 270 285 380 390 395 410 420 LIST TEC 1 PH 2484 2628 2809 2991 2649 2697 2766 3006 3160 3299 3134 3209 3416 3438 3875 4280 3262 3331 3550 3597 3741 4434 ---4120 4322 4349 4525 5250 ------6065 6209 6577 ------- EXP 3 PH 2473 2638 2665 2878 2638 2713 2777 2862 3049 3150 3219 3278 3325 3736 3832 3278 3342 3411 3485 3603 3986 4115 4131 4184 4237 4387 4802 4941 4999 5953 6071 6129 6428 6476 1 PH 3374 3715 3901 3944 3710 3870 4046 4291 4328 5463 4211 4482 4690 4696 5953 ---4605 4765 5043 5047 6198 ------5729 6076 6081 7222 ---------8219 9365 ---------- Single Phase motors are field convertible 115V/230V. Three phase motors are field convertible 230V/460V. Motors are set to lower voltage at the factory, unless a request is made at time of order to set to the higher voltage. Dimensions SIZE 24” 30” 36” 42” 48” 60” BLADE DIAMETER 24” 30” 36” 42” 48” 60” PANEL SIZE 30” 36” 42” 48” 54” 66” Note: Depth dimension varies with motor selection. DEPTH DIMENSION 16” 16” 18” 20” 21” 26” 3 PH 3438 3683 3757 3997 3774 4002 4019 4146 4382 4605 4344 4451 4547 4743 5090 5277 4738 4743 4892 5090 5335 5570 5746 5702 5932 6134 6358 6566 6759 6891 8272 8506 8618 8900 9029 Heavy Duty Direct Drive Exhaust Fans 26 Features • Totally enclosed and explosion proof motors. - Explosion proof motors are Class 1, Div 1 Group D and Class 2, Div 1, Groups F & G • Fans are shipped completely assembled • Cast aluminum blades • 14 gauge steel panel with welded steel pipe bracing • 1 year limited warranty Options • CES Shutters • EMF Front Guards • IBG Rear Guards • Acid Resistant Coating • Reversed Air Flow • Flat Front Venturi Standard Models BLADE SIZE 12” 16” 18” 20” 24” 30” 36” 42” 48” 60” MODEL 1-PHASE 3-PHASE 115/230V-60Hz 230/460v-60Hz EHD12-1/4 EHD12-1/4-3 EHD16-1/4 EHD16-1/4-3 EHD18-1/3 EHD18-1/3-3 EHD18-1/2 EHD18-1/2-3 EHD20-1/4 EHD20-1/4-3 EHD20-1/2 EHD20-1/2-3 EHD20-1 EHD20-1-3 EHD24-1/4 EHD24-1/4-3 EHD24-1/3 EHD24-1/3-3 EHD24-1/2 EHD24-1/2-3 EHD24-3/4 EHD24-3/4-3 EHD24-1 EHD24-1-3 EHD24-2 EHD24-2-3 -----EHD24-3-3 EHD30-1/3 EHD30-1/3-3 EHD30-1/2 EHD30-1/2-3 EHD30-3/4 EHD30-3/4-3 -----EHD30-1-3 EHD30-1 1/2 EHD30-1 1/2-3 EHD30-2 EHD30-2-3 -----EHD30-3-3 EHD36-1 EHD36-1-3 EHD36-2 EHD36-2-3 -----EHD36-3-3 -----EHD36-5-3 -----EHD42-1-3 EHD42-2 EHD42-2-3 -----EHD42-3-3 -----EHD42-5-3 -----EHD48-3-3 -----EHD48-5-3 -----EHD60-3-3 -----EHD60-5-5 -----EHD60-7 1/2-3 -----EHD60-10-3 PANEL SIZE (Sq.) 16” 20” 24” 30” 36” 42” 48” 54” 66” HP RPM CFM 0” SP db’s @ 10’ WT lbs. 1/4 1/4 1/3 1/2 1/4 1/2 1 1/4 1/3 1/2 3/4 1 2 3 1/3 1/2 3/4 1 1 1/2 2 3 1 2 3 5 1 2 3 5 3 5 3 5 7 1/2 10 1725 1725 1725 1725 1725 1725 1725 1725 1150 1725 1725 1725 1725 1725 1150 1725 1150 870 1725 1150 1725 1150 1150 1150 1725 870 1150 1150 1150 1150 1150 1150 1150 870 870 1180 2800 3375 4150 3720 4800 6900 5200 4975 6510 6900 7425 9525 10500 6950 8980 10440 10640 12000 14000 16000 13600 17620 20500 28000 15800 17964 24500 28970 28600 32000 40000 45000 47000 57200 74 75 75 76 75 76 77 82 75 82 83 83 83 85 79 89 79 74 89 82 89 84 84 85 94 82 88 88 88 92 94 97 97 92 93 35 45 60 60 60 65 70 135 145 140 145 155 165 170 145 135 175 215 165 215 190 225 250 255 250 300 260 270 285 290 305 700 730 740 750 1 PH 1502 1833 1945 2029 1859 2003 2238 1972 2387 2184 2360 2424 3059 ---2611 2430 3111 ---2830 ------4481 ---------------------------------------- TEC LIST 3 PH 1493 1844 1961 2041 1849 2020 2132 1961 2419 2195 2227 2312 2510 2728 2643 2441 2777 3431 2691 3208 2883 3581 3687 4237 3554 4161 3921 4406 4582 5318 5568 6602 7226 9490 12719 1 PH 1881 2212 2441 2611 2243 2589 2797 2355 3197 2766 2947 2984 ------3421 3011 3587 ---4370 ------5382 ---------------------------------------- Single Phase motors are field convertible 115V/230V. Three phase motors are field convertible 230V/460V. Motors are set to lower voltage at the factory, unless a request is made at time of order to set to the higher voltage. Dimensions SIZE 12” 16” 20” 24” 30” 36” 42” 48” 60” BLADE DIAMETER 12” 16” 20” 24” 30” 36” 42” 48” 60” PANEL SIZE 16” 20” 24” 30” 36” 42” 48” 54” 66” Note: Depth dimension varies with motor selection. DEPTH DIMENSION 11” 11” 13” 15” 15” 18” 18” 20” 22” EXP 3 PH 1945 2276 2574 2584 2301 2563 2846 2419 3240 2739 2803 3032 3347 3623 3469 2984 3480 ---3522 4161 3772 4247 4642 5361 4530 ---4876 5531 6186 6442 7178 7726 8835 ------- Industrial Belt Drive Exhaust Fans Features • Totally enclosed motors: - 1-Phase motors are field convertible 115V / 230V - 3-Phase motors are field convertible 230V / 460V - Motors are set to lower voltage at the factory, unless a request is made at time of order to set to the higher voltage • 16 Gauge steel venturi with steel pipe bracing • Steel blades • Double pillow block bearing shaft support • 1 year limited warranty Options • CES Shutters • EMF Front Guard • IBG Rear Guards Standard Models BLADE SIZE 24” 30” 36” 42” 48” 60” MODEL 1-PHASE 3-PHASE 115/230V-60Hz 230/460v-60Hz IE24-1/3 IE24-1/3-3 PANEL SIZE (Sq.) 27 LIST HP RPM CFM db’s @ 10’ WT. (LBS) 1/3 825 5300 61 70 1 PH 2061 3PH 2077 1/2 925 6200 66 75 2130 2139 3/4 1050 7000 71 82 2304 2165 IE24-1/2 IE24-1/2-3 IE24-3/4 IE24-3/4-3 IE24-1 IE24-1-3 1 1175 7800 73 90 2330 2218 IE30-1/3 IE30-1/3-3 1/3 570 7500 62 95 2156 2171 IE30-1/2 IE30-1/2-3 1/2 625 8500 64 95 2403 2240 IE30-3/4 IE30-3/4-3 3/4 725 10000 66 105 2408 2271 IE30-1 IE30-1-3 1 825 11000 70 115 2461 2350 IE36-1/3 IE36-1/3-3 1/3 425 9000 64 103 2372 2387 IE36-1/2 IE36-1/2-3 1/2 500 10500 66 105 2445 2461 IE36-3/4 IE36-3/4-3 3/4 575 11900 68 110 2624 2487 IE36-1 IE36-1-3 1 650 13100 70 120 2646 2535 IE36-1 1/2 IE36-1 1/2-3 1 1/2 750 15000 72 155 3025 2888 IE36-2 IE36-2-3 2 830 16500 74 165 ---- 2946 IE42-3/4 IE42-3/4-3 3/4 430 14000 67 175 2967 2831 IE42-1 IE42-1-3 1 490 15400 69 180 2988 2883 IE42-1 1/2 IE42-1 1/2-3 1 1/2 550 17200 71 185 3131 2999 IE42-2 IE42-2-3 2 620 19400 74 200 ---- 3420 ------ IE42-3-3 3 700 22000 79 225 ---- 3536 IE48-3/4 IE48-3/4-3 3/4 350 17000 70 185 3246 3109 IE48-1 IE48-1-3 1 400 19100 71 190 3268 3162 IE48-1 1/2 IE48-1 1/2-3 1 1/2 460 22000 72 200 3404 3272 IE48-2 IE48-2-3 2 520 24000 74 250 ---- 3810 ------ IE48-3-3 3 590 27500 80 260 ---- 3927 ------ IE48-5-3 5 660 30500 83 280 ---- 3958 IE60-2 IE60-2-3 2 320 31000 77 320 ---- 5302 ------ IE60-3-3 3 370 35000 84 330 ---- 5418 ------ IE60-5-3 5 420 39000 86 350 ---- 5466 30” 36” 42” 48” 54” 66” Dimensions SIZE 24” 30” 36” 42” 48” 60” BLADE DIAMETER 24” 30” 36” 42” 48” 60” PANEL SIZE 30” 36” 42” 48” 54” 66” Note: Depth dimension varies with motor selection. DEPTH DIMENSION 18” 18” 20” 20” 22” 28” Industrial Direct Drive Exhaust Fans Features 28 • Totally enclosed motors: - 1-Phase motors are field convertible 115V / 230V - 3-Phase motors are field convertible 230V / 460V - Motors are set to lower voltage at the factory, unless a request is made at time of order to set to the higher voltage • 14 Gauge steel venturi with steel pipe bracing • 4-blade steel propeller • 1 year limited warranty Options • CES Shutters • EMF Front Guards • IBG Rear Guards Standard Models MODEL BLADE SIZE LIST PANEL SIZE (Sq.) CFM 0” SP 1-PHASE 3-PHASE 115/230V-60Hz 230/460v-60Hz 12” IED12-1/4 IED12-1/4-3 16” 1/4 1725 1480 64 16” IED16-1/3 IED16-1/3-3 20” 1/3 1725 2834 18” IED18-1/2 IED18-1/2-3 24” 1/2 1725 20” IED20-3/4 IED20-3/4-3 24” 3/4 24” IED24-1 IED24-1-3 30” 30” IED30-1 IED30-1-3 36” IED36-1 1/2 HP RPM db’s @ 10’ WT. (LBS) TEC 1 PH 3 PH 30 1186 1191 73 40 1420 1448 3890 74 55 1596 1608 1725 4574 77 65 1853 1853 1 1725 6632 81 155 2138 2024 36” 1 1150 8600 79 185 4190 2424 IED36-1 1/2-3 42” 1.5 1150 12103 82 260 5280 3244 42” ------ IED42-2-3 48” 2 1150 17315 87 280 -- 3478 48” ------ IED48-3-3 54” 3 850 24280 86 360 -- 4875 Dimensions SIZE BLADE DIAMETER PANEL SIZE DEPTH DIMENSION 12” 12” 16” 11” 16” 16” 20” 11” 20” 20” 24” 13” 24” 24” 30” 15” 30” 30” 36” 15” 36” 36” 42” 18” 42” 42” 48” 18” 48” 48” 54” 20” Note: Depth dimension varies with motor selection. Exhaust Fan Accessories-Heavy Duty Exhaust Shutter Features 29 • Air open - Gravity close • Aluminum construction • Heavy duty blades • Weather stripping for tighter seal Standard Models FAN SIZE MODEL 12” CES 12 12” x 12” 14” x 15” WT. (LBS) 4 16” CES 16 16” x 16” 19” x 19” 5 162 18” CES 18 18” x 18” 21” x 21” 7 187 20” CES 20 20” x 20” 23” x 23” 8 191 24” CES 24 24” x 24” 27” x 27” 9 232 30” CES 30 30” x 30” 33” x 33” 12 285 36” CES 36 36” x 36” 39” x 39” 12 500 42” CES 42 42” x 42” 45” x 45” 22 634 48” CES 48 48” x 48” 51” x 51” 25 732 60” CES 60 60” x 60” 63” x 63” 31 1016 ROUGH OPENING OVERALL SIZE LIST 134 Heavy Duty Shutter Motor Kit Features • Used to open shutter when shutter is used to provide make-up air (Shutter should be one size larger than exhaust fan size and should be located on opposite wall) • Used for positive closure of exhaust shutter • 115V or 230V, 60 HZ, 1Ø Standard Models MODEL DESCRIPTION WT. (LBS) LIST MK-1 For shutter sizes 12” thru 30” 5 377 MK-2 For shutter sizes 36” thru 60” 8 500 Motorized Supply Air Intake Shutter Features • Inward opening blades for use with intake fans when shutter is located directly in air stream • Galvanized construction • 115V or 230V, 60 HZ, 1-Phase Standard Models FAN SIZE MODEL ROUGH OPENING OVERALL SIZE WT. (LBS) LIST 24” CESM-24 24” x 24” 27” x 27” 15 966 30” CESM-30 30” x 30” 33” x 33” 18 1128 36” CESM-36 36” x 36” 39” x 39” 21 1232 42” CESM-42 42” x 42” 45” x 45” 35 2012 48” CESM-48 48” x 48” 51” x 51” 42 2844 60” CESM-60 60” x 60” 63” x 63” 56 3354 Cabinet Exhaust Fans With Shutters 30 Features • 120V, 1-Phase or 230 / 460V, 3-Phase, ball bearing, permanently lubricated, drip proof motor - UL listed • Permanently lubricated bearings on blade drive shaft • Aluminum blade • Aluminum shutter • 20 Gauge powder coated venturi • 18 Gauge galvanized steel housing • 1725 RPM • Motor frame size 56 / Shaft: 5/8” • Ships fully assembled • Meets OSHA Standards • 1 year warranty Standard Models MOTOR 115V 1Ph AMPS SIZE CFM WT. (LBS) 230 / 460V 3Ph UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST HP 115V 230/460V 24 1/3 5 1.9 / .9 3270 100 868396 CBT-24B 1470 868525 CBT-24B-3 1562 30 1/3 6 1.9 / .9 7730 120 868402 CBT-30B 1654 868532 CBT-30B-3 1776 36 1/2 8 2.3 / 1.1 9870 135 868419 CBT-36B 1868 868549 CBT-36B-3 2021 42 3/4 11 3.3 / 1.5 14800 155 868426 CBT-42B 2297 868556 CBT-42B-3 2480 48 1 15 3.8 / 1.9 21500 200 868518 CBT-48B 2848 868501 CBT-48B-3 3032 Dimensions OUTSIDE DIMENSIONS SIZE MAXIMUM REQUIRED INSIDE WALL OPENING HEIGHT WIDTH DEPTH 24” 28 1/4” 28 1/4” 22 1/2” 28 3/4” x 28 3/4” 30” 34 1/4” 34 1/4” 22 1/2” 34 1/2” x 34 1/2” 36” 40 1/4” 40 1/4” 18 1/2” 40 1/2” x 40 1/2” 42” 48 1/2” 48 1/2” 18 1/2” 48 3/4” x 48 3/4” 48” 54 1/2” 54 1/2” 21 1/2” 54 3/4” x 54 3/4” Cabinet Exhaust Fan Package Option With Bolt Together Rear Guard 31 Package Includes • Wall collar • Automatic shutter • Rear box guard Standard Models MODEL FAN SIZE LIST CEFP-24 24” 1496 CEFP-30 30” 1688 CEFP-36 36” 2098 CEFP-42 42” 2412 CEFP-48 48” 2877 Features • For IE, IED, EHB and EHD models. • Wall collar OD is 1/4" larger than "B" dimension of fan • Meets OSHA requirements With Expanded Metal Rear Guard Package Includes • Rear box guard • Wall collar • Automatic shutter Standard Models MODEL FAN SIZE LIST CEFP-12 12” 936 CEFP-16 16” 1000 CEFP-18 18” 1129 CEFP-20 20” 1169 CEFP-60 60” 4322 Features • For IE, IED, EHB and EHD models. • Wall collar OD is 1/4" larger than "B" dimension of fan • Meets OSHA requirements Exterior Weather Hood Option Features • For IE, IED, EHB and EHD models. • Galvanized housing with 1/2 - 16 expanded metal bird screen • Can be used for intake or exhaust • Meets OSHA requirements Standard Models MODEL FAN SIZE LIST WH-12 WH-16 WH-18 WH-20 WH-24 WH-30 WH-36 WH-42 WH-48 WH-60 12” 16” 18” 20” 24” 30” 36” 42” 48” 60” 939 981 1001 1017 1449 1508 1871 1945 2251 3009 Exhaust Fan Accessories - Fan Guards Rear Box Guard Bolt Together With Wire Guards 32 Features • For IE, IED, EHB and EHD models • 1/4" Smaller than the panel size of the fan • Meets OSHA requirements Standard Models MODEL IBG-24 IBG-30 IBG-36 IBG-42 IBG-48 IBG-60 FAN SIZE 24” 30” 36” 42” 48” 60” LIST 837 881 1062 1113 1364 2104 Rear Expanded Metal Box Guard Features • For IE, IED, EHB and EHD models • 1/4" Smaller than the panel size of the fan • Meets OSHA requirements Standard Models MODEL IBG-12 FAN SIZE 12” LIST 513 IBG-16 16” 513 IBG-18 18” 567 IBG-20 20” 567 Spiral Rear Guard Features • For EHD models only • Fits between motor and blade • Rear guard installed at factory only • Meets OSHA requirements Standard Models MODEL SR-12 SR-16 SR-18 SR-20 SR-24 FAN SIZE 12” 16” 18” 20” 24” LIST 291 310 343 354 380 Front Guard Features • For EHB, EHD, IE, & IED models • 1” Larger than blade size • Meets OSHA requirements Standard Models Spiral wire guards 12” - 48” Expanded metal guard - 60” MODEL FAN LIST EMF-12 EMF-16 EMF-20 EMF-24 EMF-30 EMF-36 EMF-42 EMF-48 EMF-60 12” 16” 20” 24” 30” 36” 42” 48” 60” 335 348 367 387 489 605 637 696 1049 Belt Drive Roof Ventilators Features Options • Protective coating. • Disconnect switch • Prefabricated curbs BLADE SIZE 24” 30” 36” 42” 48” 54” 60” 1-PHASE 115/230V 3-PHASE 230/460v HP MODEL UEB24-1/3 UEB24-1/3-3 1/3 RPM 780 • Standard blades are heavy gauge steel • Totally enclosed motors. • 1-Phase motors are field convertible 115V/230V • 3-Phase motors are field convertible 230V/460V • Motors are set to lower voltage at factory unless a request is made at time of order to set them to the higher voltage • Wind band is 18 gauge galvanized steel • Galvanized steel butterfly damper with rubber stops and seals • Size of the roof opening to be 6” larger than fan size (Wind Band O.D.) dimension • 1 year limited warranty. Standard Models C.F.M - STATIC PRESSURE 0” 4900 1/8” 4222 1/4” 2807 1/2” 800 Db’s WT. @ 10’ (LBS) 64 300 LIST ODP 1 PH 4763 TEC 3 PH 4733 1 PH 4769 3 PH 4763 UEB24-1/2 UEB24-1/2-3 1/2 980 6219 5716 5661 2600 66 305 4901 4865 4913 4895 UEB24-3/4 UEB24-3/4-3 3/4 1140 7090 6648 6144 4413 71 310 5068 4955 5080 4991 UEB30-1/2 UEB30-1/2-3 1/2 640 8507 7170 4486 1373 64 350 5129 5099 5141 5122 UEB30-3/4 UEB30-3/4-3 3/4 770 10235 9192 7657 3833 66 360 5398 5290 5416 5320 UEB30-1 UEB30-1-3 1 975 10668 9959 8626 5184 70 370 5769 5680 5769 5715 UEB36-1/2 UEB36-1/2-3 1/2 530 10500 8821 5985 2084 66 360 6057 6021 6075 6057 UEB36-3/4 UEB36-3/4-3 3/4 605 11985 10583 8563 4017 68 370 6404 6291 6416 6321 UEB36-1 UEB36-1-3 1 665 13174 11932 10299 5729 70 390 6656 6590 6656 6632 UEB36-1 1/2 UEB36-1 1/2-3 1.5 720 13660 12012 9579 5000 72 395 6920 6794 6931 6818 UEB42-3/4 UEB42-3/4-3 3/4 435 14040 11530 7633 3311 67 455 6974 6866 6992 6896 UEB42-1 UEB42-1-3 1 490 15429 13194 10438 4668 69 465 7286 7244 7286 7274 UEB42-1 1/2 UEB42-1 1/2-3 1.5 550 17420 15421 13117 7289 71 470 7698 7573 7717 7603 UEB42-2 UEB42-2-3 2 725 20653 19128 17503 11319 74 485 8202 7938 8267 7963 ------ UEB42-3-3 3 830 23645 22296 20984 17290 79 495 ---- 8041 ---- 8076 UEB48-3/4 UEB48-3/4-3 3/4 370 17339 13700 7389 2244 70 505 8076 7963 8088 7998 UEB48-1 UEB48-1-3 1 410 19188 16078 10903 4037 71 520 8321 8232 8333 8274 UEB48-1 1/2 UEB48-1 1/2-3 1.5 465 21731 19010 14991 7081 72 535 8460 8352 8478 8387 UEB48-2 UEB48-2-3 2 520 24274 21943 19080 10125 74 545 9196 8963 9269 8987 ------ UEB48-3-3 3 680 28150 25683 23615 16930 80 560 ---- 9101 ---- 9137 UEB54-1 UEB54-1-3 1 410 23130 20588 17500 9600 73 870 11299 11209 11312 11216 UEB54-1 1/2 UEB54-1 1/2-3 1.5 450 25400 22600 19300 10316 75 880 11539 11437 11569 11467 UEB54-2 UEB54-2-3 2 480 27200 24312 20660 11010 76 890 11827 11605 11893 11629 ------ UEB54-3-3 3 550 31213 28722 25830 15420 80 900 ---- 12006 ---- 12042 ------ UEB54-5-3 5 660 37458 35238 32843 26538 82 920 ---- 12162 ---- 12174 UEB60-1 1/2 UEB60-1 1/2-3 1.5 340 28068 23203 15624 8000 78 940 12294 12180 12312 12210 UEB60-2 UEB60-2-3 2 390 32200 26710 17924 9380 80 960 12522 12300 12582 12324 ------ UEB60-3-3 3 450 37183 32356 25324 15013 84 985 ---- 12935 ---- 12965 ------ UEB60-5-3 5 540 44600 41232 35819 23237 86 1000 ---- 13037 ---- 13085 Dimensions 24” MINIMUM ROOF HOLE SIZE (SQUARE) 34” 30” 40” 36” 45” 22” 36” 46” 42” 51” 25” 42” 52” 48” 57” 27” 48” 58” 54” 63” 30” 54” 64” 60” 69” 36” 60” 70” 66” 75” 42” SIZE WIND BAND ROOF CURB OUTER DIMENSION OUTER DIMENSION (SQUARE) 30” 39” WIND BAND HEIGHT 19” 33 Direct Drive Roof Ventilators Features 34 Options • Protective coating. • Disconnect switch • Prefabricated curbs • Cast aluminum blades on most models • Totally enclosed and explosion proof motors • 1-Phase motors are field convertible 115V/230V • 3-Phase motors are field convertible 230V/460V • Motors are set to lower voltage at the factory unless a request is made at time of order to set them to the higher voltage • Explosion proof motors are Class 1, Div 1, Group D and Class 2, Div 1, Groups F & G • Wind band is 18 Gauge galvanized steel • Rubber shim under dampers for better seal • Size of roof opening to be 6” larger than fan size (B dimensions) • Some models available with low R.P.M. motor for quieter operation • 1 year limited warranty Standard Models BLADE SIZE 18” 24” 30” 36” 42” 48” 60” 1-PHASE 115/230V 3-PHASE 230/460v HP RPM MODEL C.F.M - STATIC PRESSURE 0” 1/8” 1/4” 1/2” Db’s WT. @ 10’ (LBS) LIST TEC EXP 1 PH 3 PH 1 PH 3 PH UED18-1/4 UED18-1/4-3 1/4 1140 2570 2263 1673 854 66 170 4242 4260 4530 4775 UED18-1/3 UED18-1/3-3 1/3 1725 3375 3000 2600 1400 75 175 3925 3918 4535 4667 UED18-1/2 UED18-1/2-3 1/2 1725 4133 3938 3724 3132 76 180 4032 4014 4649 4763 UED18-1 UED18-1-3 1 1725 4600 4375 4080 3000 77 190 4494 4398 5122 5170 UED24-1/4 UED24-1/4-3 1/4 1725 5200 4200 2820 ---- 75 240 4391 4410 4680 4925 UED24-3/4 UED24-3/4-3 3/4 1140 6900 6450 6265 3300 76 260 5315 5099 5925 5877 UED24-1 UED24-1-3 1 1725 7425 7000 6350 5000 83 280 4793 4709 5428 5487 ------ UED24-3-3 3 1725 10500 9800 9500 8700 85 295 ---- 5057 ---- 6009 UED30-3/4 UED30-3/4-3 3/4 1140 10440 9750 8750 6000 79 310 5566 5200 6177 6135 ------ UED30-1-3 1 870 10800 10100 9100 6360 74 330 ---- 6045 ---- ---- UED30-1 1/2 UED30-1 1/2-3 1.5 1140 10410 9686 8834 6420 81 325 7698 5698 ---- 6489 UED30-2 UED30-2-3 2 1140 14000 13750 12900 10450 82 335 9280 5835 ---- 6680 ------ UED30-3-3 3 1725 16000 15350 14700 12900 89 335 ---- 5327 ---- 6285 UED36-2 UED36-2-3 2 1140 17620 16500 15200 12300 84 430 10323 6914 ---- 7759 ------ UED36-3-3 3 1140 20500 19500 18500 15850 85 455 ---- 7333 ---- 8718 ------ UED36-5-3 5 1140 22600 21700 20500 19000 87 465 ---- 7825 ---- 9388 UED42-2 UED42-2-3 2 1140 17964 17277 15326 12351 88 500 11024 7632 ---- 8472 ------ UED42-5-3 5 1140 28970 27960 26840 24200 89 500 ---- 8507 ---- 10066 ------ UED48-3-3 3 1140 28600 26500 24400 20000 92 550 ---- 9184 ---- 10113 ------ UED48-5-3 5 870 33000 31500 29750 25300 86 665 ---- 10964 ---- ---- ------ UED48-7 1/2-3 7.5 1140 37000 35100 32800 28000 94 740 ---- 11012 ---- 13001 ------ UED48-10-3 10 1140 41000 39200 38300 35400 95 875 ---- 11593 ---- 13708 ------ UED60-5-3 5 870 45200 41500 37000 26000 90 940 ---- 14487 ---- ---- ------ UED60-7 1/2-3 7.5 870 47000 45500 43600 38700 92 950 ---- 15499 ---- ---- ------ UED60-10-3 10 690 54000 51900 49000 43200 87 960 ---- 26205 ---- ---- Dimensions 18” MINIMUM ROOF HOLE SIZE (SQUARE) 28” WIND BAND OUTER DIMENSION 24” ROOF CURB OUTER DIMENSION (SQUARE) 33” 24” 34” 30” 39” 19” 30” 40” 36” 45” 22” SIZE WIND BAND HEIGHT 16” 36” 46” 42” 51” 25” 42” 52” 48” 57” 27” 48” 58” 54” 63” 30” 60” 70” 66” 75” 42” Belt Drive Hooded Roof Ventilators Features • Used for exhaust or intake • Heavy industrial steel base with aluminum hood • Steel blades • Bird screen included • 1 year limited warranty Options • Direct drive • Roof curb • Protective coatings, explosion proof. • Filters Dimensions CLOSED SIZE 24” 30” 36” 42” 48” 54” 60” OPEN MINIMUM ROOF HOLE (SQUARE) 30” 36” 42” 48” 54” 60” 66” HOLE LENGTH x WIDTH 54” x 64” 60” x 76” 72” x 82” 80” x 89” 87” x 95” 92” x 98” 90” x 107” HOOD HEIGHT 30” 36” 40” 43” 46” 54” 56” ROOF CURB O.D. (SQUARE) 39” 45” 51” 57” 63” 69” 75” Standard Models BLADE SIZE 24” 30” 36” 42” 48” 54” 60” 1-PHASE 115/230V 3-PHASE 230/460v MODEL RE24-1/4 RE24-1/4-3 RE24-1/2 RE24-1/2-3 RE24-3/4 RE24-3/4-3 RE24-1 RE24-1-3 RE30-1/3 RE30-1/3-3 RE30-1/2 RE30-1/2-3 RE30-3/4 RE30-3/4-3 RE30-1 RE30-1-3 RE30-1 1/2 RE30-1 1/2-3 RE36-1/3 RE36-1/3-3 RE36-1/2 RE36-1/2-3 RE36-3/4 RE36-3/4-3 RE36-1 RE36-1-3 RE36-1 1/2 RE36-1 1/2-3 RE36-2 RE36-2-3 RE42-1/2 RE42-1/2-3 RE42-3/4 RE42-3/4-3 RE42-1 RE42-1-3 RE42-1 1/2 RE42-1 1/2-3 RE42-2 RE42-2-3 -----RE42-3-3 RE48-3/4 RE48-3/4-3 RE48-1 RE48-1-3 RE48-1 1/2 RE48-1 1/2-3 RE48-2 RE48-2-3 -----RE48-3-3 -----RE48-5-3 RE54-1 RE54-1-3 RE54-1 1/2 RE54-1 1/2-3 RE54-2 RE54-2-3 -----RE54-3-3 -----RE54-5-3 RE60-1 RE60-1-3 RE60-1 1/2 RE60-1 1/2-3 RE60-2 RE60-2-3 ----RE60-3-3 ----RE60-5-3 ----RE60-7 1/2-3 HP RPM 1/4 1/2 3/4 1 1/3 1/2 3/4 1 1.5 1/3 1/2 3/4 1 1.5 2 1/2 3/4 1 1.5 2 3 3/4 1 1.5 2 3 5 1 1.5 2 3 5 1 1.5 2 3 5 7.5 780 980 1140 1250 595 640 770 975 1140 460 530 605 665 720 870 390 435 490 550 725 830 370 410 465 520 680 800 410 450 480 550 660 250 340 390 450 540 620 C.F.M - STATIC PRESSURE 0” 4900 6219 7090 7180 7909 8507 10235 10668 12473 9113 10500 11985 13174 13660 16554 12343 14040 15429 17420 20653 23645 17339 19188 21731 24274 28150 33160 23130 25400 27200 31213 37458 23090 28068 32200 37183 44600 50184 1/8” 4222 5716 6648 6696 6380 7170 9192 9959 11867 6992 8821 10583 11932 12012 15376 9352 11530 13194 15421 19128 22296 13700 16078 19010 21943 25683 30900 20588 22600 24312 28722 35238 19161 23283 26710 32356 41232 47603 1/4” 2807 5061 6144 6271 3617 4486 7657 8626 11112 3722 5985 8563 10299 9579 14088 4957 7633 10438 13117 17503 20984 7389 10903 14991 19080 23615 29290 17500 19300 20660 25830 32893 12850 15624 17924 25324 35819 43981 1/2” 800 2600 4413 4464 767 1373 3833 5184 8135 486 2084 4017 5729 5000 9691 1642 3311 4668 7289 11319 17290 2244 4037 7081 10125 16930 25000 9600 10316 11010 15420 26538 ---8000 9380 15013 23237 32880 Db’s WT. @ 10’ Lbs. 60 66 71 73 60 64 66 70 77 64 66 68 70 72 74 65 67 69 71 74 79 70 71 72 74 80 83 73 75 76 77 80 76 77 78 84 86 89 340 350 360 365 385 385 400 400 410 425 425 435 440 440 455 540 545 555 560 570 585 650 660 665 680 700 720 910 920 930 940 960 1150 1150 1200 1220 1240 1285 LIST EXHAUST INTAKE 1 PH 3 PH 1 PH 3 PH 5697 5673 5697 5673 5903 5843 5903 5843 6031 5934 6031 5934 6358 6177 6358 6177 6613 6576 6613 6576 6715 6655 6715 6655 6945 6849 6945 6849 7177 6994 7177 6994 7321 7049 7321 7049 8013 7976 8013 7976 8110 8049 8110 8049 8273 8177 8273 8177 8461 8279 8461 8279 8794 8491 8794 8491 9449 8934 9449 8934 8989 8927 8989 8927 9303 9207 9303 9207 9491 9310 9491 9310 9558 9377 9679 9377 10268 9758 10268 9758 ---9880 ---9880 10910 10813 10910 10813 11103 10922 11103 10922 11273 10971 11273 10971 11922 11407 11922 11407 ---11552 ---11552 ---11643 ---11643 13213 13031 13213 13031 13479 13176 13479 13176 13819 13303 13819 13303 ---13546 ---13546 ---13649 ---13649 13904 13722 13904 13722 14437 14134 14437 14134 14753 14238 14753 14238 ---14486 ---14486 ---14577 ---14577 ---15092 ---15092 35 Insulated Roof Curbs Features • Used with UEB, UED, and RE roof ventilators • For flat, single slope or ridge style roofs • Galvanized steel construction • 1 1/2” insulated thickness, 3 pounds density • 8” height overall • Not for corrugated roofs 36 Standard Models MODEL FAN BASE DIMENSION OVERALL DIMENSION FLAT SLOPE RIDGE 18” FLS-18 SLS-18 RDS-18 32” x 32” 24” FLS-24 SLS-24 RDS-24 30” FLS-30 SLS-30 36” FLS-36 42” LIST FLAT SLOPE RIDGE 44” x 44” 446 863 1017 38” x 38” 50” x 50” 517 988 1160 RDS-30 44” x 44” 56” x 56” 583 1107 1309 SLS-36 RDS-36 50” x 50” 62” x 62” 637 1214 1399 FLS-42 SLS-42 RDS-42 56” x 56” 68” x 68” 702 1333 1577 48” FLS-48 SLS-48 RDS-48 62” x 62” 74” x 74” 946 1791 2124 54” FLS-54 SLS-54 RDS-54 68” x 68” 80” x 80” 1024 1946 2303 60” FLS-60 SLS-60 RDS-60 74” x 74” 86” x 86” 1119 2118 2506 Back Draft Dampers to Fit in Curb UEB and UED models require higher curb height when used with back draft damper-consult factory. FAN SIZE MODEL SHUTTER SIZE LIST 18” CD-18 28” x 28” 593 24” CD-24 34” x 34” 691 30” CD-30 40” x 40” 953 36” CD-36 46” x 46” 1179 42” CD-42 52” x 52” 1301 48” CD-48 58” x 58” 1580 54” CD-54 64” x 64” 1981 60” CD-60 70” x 70” 2155 Motor Kit 115V or 230V, 60Hz, 1-Phase. (Specify Voltage) MODEL DESCRIPTION SHIPPING WT. (LBS) LIST DMKP1 For shutter sizes 18” thru 36” 5 540 DMKP2 For shutter sizes 42” thru 60” 8 644 Attic Fans Power Attic Mount Dome Ventilator 37 Features • 120V Motor / 1-Phase • Safety fire link protected • Automatic thermostat (90°-130°F) • Insect and bird screen installed • Powder coated metal dome and base Note: Product may differ in appearance from image. Standard Models UPC# 686334 MODEL 866422 866439 866446 DOME COLOR SPEED CFM .03 SP VOLTS HP RPM ATTIC SIZE / SQ. FT. WT LBS PDV-305-1MB-Gy Gray 1 1080 120 1/12 1050 average/1600 18 PDV-305-1MB-Br Brown 1 1080 120 1/12 1050 average/1600 18 PDV-305-1MB-Blk Black 1 1080 120 1/12 1050 average/1600 18 LIST 135 Gable Exhaust Fan Features • 120V motor / 1-Phase • Safety fire link protected • Automatic adjustable thermostat • Partially assembled (mounting tabs must be assembled) • 15” diameter x 6” depth • 4 mounting tabs on 16” centers Standard Models UPC# 686334 MODEL DESCRIPTION CFM .03 SP ATTIC SIZE/ ST. FT. SHIPPING WT. (LBS) LIST 866378 GV-405-2B Gable Mount Ventilator 1300 average/2000 11 105 866521 AGD-1416B Alum Damper for GV-405-2 ---- ---- 3 64 Belt Drive Wholehouse Fans Features • 2-Speed motors • Shutters automatically open when fan is turned on and close tightly when fan is turned off • 120V, 1-Phase NOTE: Belt Drive Fan with “No Joist Cut” Shutter. Fan Dimensions Standard Models FAN CFM @ .1 MOUNTING EXHAUST IN. H2O FAN UPC# MOTOR WT. MODEL SIZE SPEED PRESSURE SPEED DIMENSIONS SQ. FT. AMPS HP (LBS) 686334 (IN) DROP w/ RPM REQ’D SHUTTER A B C 793629 BD24-2-WHS 24” 2 1/3 4500/2700 612/410 28 29.5 14.5 7 5.7/4.8 40 793636 BD30-2-WHS 30” 2 1/3 7600/5800 520/350 34 35.5 14.5 9 7.5/4.4 50 793643 BD36-2-WHS 36” 2 1/3 9675/6400 395/265 40 41.5 14.5 12 6.3/3.1 64 Ceiling Shutters UPC# 686334 MODEL FIT HOLE SIZE (I.D.) OUTSIDE SIZE (O.D.) LIST A 674 723 796 C Control Options FAN SHIPPING LIST SIZE WT. (LBS) 794480 CS-10-W 26X26 28X28 24” 8 129 794466 CS-13-W 32X34 34X36 30” 10 135 794534 CS-14-W 34X34 36X36 30” 10 141 794473 CS-18-W 32X43 34X45 36” 11 154 794527 CS-19-W 34X43 36X45 36” 11 166 “Joist out style” (For replacement only) UPC# MODEL 686334 792707 2-SW 500081 1A22-7 B DESCRIPTION WGHT. LIST LBS. 2 Speed wall switch & plate 1 37 SP Close on rise (Attic Thermostat) (90°-130°F) 1 44 1.5 44 1.5 44 SP Close on rise (IvoryWhole House Thermostat) 500036 1A22-8 (50°-90°F) SP Close on rise (White Whole House Thermostat) 500005 1A22-8W (50°-90°F) Industrial Ceiling Fans Features • All metal construction. White epoxy finish • 24” Down rod with safety cable • Mounts to 3/8” diameter steel J-hook • 18 pole, 115V, 1-Phase, Capacitor type, impedance protected motor with sealed ball bearings • Optional or other down rod length available 38 Commercial Grade Industrial Grade Heavy Duty Grade • Assembly required • 30” lead wires • 1 year limited warranty • Fully assembled except blade bolt down • 3 conductor cord, 30” long with plug • Permanently lubricated • 3 year limited warranty • Fully assembled except blade bolt down • 3 conductor cord, 30” long with plug • Permanently lubricated • 6 year limited warranty Standard Models GRADE UPC# 686334 MODEL TYPE SIZE VOLTS CFM RPM AMPS WEIGHT (LBS.) LIST Commercial 852968 CHR-56 Down Draft 56” 120 19000 320 0.6 15 162 Industrial 797993 IHR-48 Down Draft 48” 120 17100 320 0.53 14 223 Industrial 797153 IHR-56 Down Draft 56” 120 21000 310 0.6 15 235 Industrial 798006 IHR-56R Reversible 56” 120 21000 310 0.55 14 240 Industrial 800891 IHR-56-277V* Down Draft 56” 277 21000 310 0.3 16 240 Heavy Duty 851527 HDHR-56 Down Draft 56” 120 27500 320 0.75 18 306 Heavy Duty 799393 HDHR-60 Down Draft 60” 120 47000 320 0.8 21 348 Water and Dust Resistant Models Heavy Duty 854085 HDHR-56WR Down Draft 56” 120 27500 320 1.1 17 330 Heavy Duty 854092 HDHR-60WR Down Draft 60” 129 47000 320 0.8 21 373 * 277 volt, commercial, and reversing models have lead wires instead of cordset. Solid State Controls (120 & 277V Units) 120V 277V TYPE LIST ----- 1-2 FANS SPEED CONTROL 43 853392 HR-SS-5-277 3-5 FANS SPEED CONTROL 103 852654 HR-SS-10-277 6-10 FANS SPEED CONTROL 151 UPC# 686334 MODEL UPC# 686334 MODEL 797634 HR-SS-2 ----- 797641 HR-SS-5 799416 HR-SS-10 Options Solid State Controls & Reversing Switch for IHR-56R UPC# 686334 MODEL TYPE LIST 866682 HR-RSS-3 1-3 FANS REVERSING SWITCH and SPEED CONTROL 138 UPC# 686334 MODEL 851220 HR-GUARD TYPE LIST FOR 56” MODELS 596 850421 Suffix - X3 36” DOWN ROD OPTION +40 Adder 18” Fan & Pump Lid for Existing 10 Gallon Igloo Coolers Industrial Workstation Floor Fans Features 39 • Rotary switch • Head tilts 360° • Coated steel guards • SJT type 3 conductor, 10’ long cord • Steel hub/spider aluminum paddle blades • Meets OSHA standards • 1 Year limited warranty Overall height of stand is 53” FLOOR MODEL Motor Specifications • Sleeve bearing • Permanently lubricated • Totally enclosed • Frame size: 42 • 1-Phase, 120V • 5/16 Shaft • 3-Speed HIGH STAND Standard Models UPC# 686334 MODEL 12” 798617 F-12-TE 18” 797290 F-18-TE 24” 852852 18” 24” SIZE FAN TYPE MOTOR HP CFM / RPM DIMENSIONS MAX AMPS SHIPPING WT. (LBS) LIST HIGH MED LOW “H” “W” “D” 1/12 1650 / 1590 1420 / 1380 1120 / 1080 15 1/4” 14 1/2” 9 1/2” 1.1 13 134 1/8 4600 / 1660 4200 / 1550 3200 / 1370 20 1/2” 20 1/2” 10 1/2” 1.5 20 168 F-24-TE 1/8 5850 / 1634 5200 / 1484 3600 / 1200 26” 26” 10 1/2” 2.4 23 313 797306 F-18H-TE 1/8 4600 / 1660 4200 / 1550 3200 / 1370 53” 25” 27” 2.2 27 223 854061 F-24H-TE 1/8 5850 / 1634 5200 / 1484 3600 / 1200 53” 30” 27” 2.4 30 391 FLOOR MODEL HIGH STAND TPI Commercial Workstation Floor Fans 20” Commercial Floor Fan Feaures • Rotary switch • SJT type cord - 3 conductor - 7’ long • Aluminum blade • Coated steel guards with retaining clips • Meets OSHA standards / 1 year limited warranty Motor Specification • 3-Speed • 1-Phase • 120V, 1/5HP • Open ventilated • Sleeve bearing • Permanently lubricated Standard Models UPC# 686334 MODEL SIZE TYPE MOTOR HP HIGH CFM MED LOW MAX AMPS WT. (LBS.) LIST 870658 CF-20 20” FLOOR 1/5 3450 3100 2950 1.9 18 134 523332 CU-20 20” WORKSTATION 1/5 3450 3100 2950 1.9 18 161 Industrial Mounted Workstation Fans Features 40 • Pull chain switch • Head rotates 360° vertical and horizontal direction • Coated steel guards • SJT type 3 conductor, 10’ long cord • Steel hub/spider aluminum paddle blades • Meets OSHA standards • 1 Year limited warranty Motor Specifications •3-Speed • Sleeve bearing • Totally enclosed, permanently lubricated •1-Phase, 120V •5/16 Shaft • Frame size: 42 Standard Models FAN SIZE UPC# 686334 MODEL MOTOR HP 12” 798600 U-12-TE 1/12 18” 797283 U-18-TE 1/8 24” 854078 U-24-TE 1/8 HIGH 1650 / 1590 4600 / 1660 5850 / 1634 CFM / RPM MED 1420 / 1380 4200 / 1550 5200 / 1484 LOW 1120 / 1080 3200 / 1370 3600 / 1200 “H” DIMENSIONS “W” “D” MAX AMPS SHIPPING WT (LBS) LIST 15 1/4” 14 1/2” 9 1/2” 1.1 13 140 21 1/2” 20 1/2” 10 1/2” 2.2 20 173 27” 26” 10 1/2” 2.4 23 324 NOTE: Mount with one bolt or lag screw to walls, ceilings, work benches, machines or any surface. Application Photos Pipe Mount Adaptor PIPE DIAMETER 1” UPC# 686334 851244 1 1/2” 2” MODEL LIST PM-1 47 851251 PM-1.5 51 851268 PM-2 57 2 1/2” 851275 PM-2.5 62 3” 851282 PM-3 67 Workstation Oscillating Office Fans Features • 3-speed oscillating fans with push button controls • 3 conductor SPT cord & plug • White powder coated wire mesh guards • White plastic housing and blade • Stand fan extends to 40” height • Meets OSHA standards • 1 Year limited warranty Standard Models STAND FAN DESK FAN SIZE UPC# 686334 MODEL FAN CFM AMPS SHIPPING SPEEDS LIST TYPE HIGH HIGH WT. (LBS.) 12” 851305 ODF-12 DESK 3 1200 0.4 5.4 66 16” 851312 ODF-16 DESK 3 2100 0.5 8.5 78 16” 851329 OSF-16 STAND 3 2100 0.5 15.5 98 Workstation Wall Mount Fan With Pivoting Arm 18” HIGH VELOCITY FAN MOUNTED ON 24”, 40” or 60” PIVOTING ARMS 41 Mounting Arm Features • 1-1/2" square, 14 gauge, steel tubing • 3" x 5" x 3/16” mounting plate attaches with (4) 3/8" bolts • 5' long., 18/3 SJTW conductor cord and NEMA 5-15 grounded plug • Dual electrical outlets embedded in arm to allow connection of modular fan and optional light Modular Fan Features • 18" high velocity circulator, with 3 speed, 1/8 HP, 115V, 1-Phase permanently lubricated, totally enclosed, PSC motor • Modular fan plugs into electrical outlet on arm Use on loading docks to • Coated steel guards / Aluminum blades cool off workers entering hot truck trailers. • Meets OSHA standards / 1 year limited warranty Use at factory workstations to cool off people or the machines. Standard Models UPC# 686334 800914 800921 800938 FAN SIZE 18” 18” 18” MODEL 24-LDF-TE 40-LDF-TE 60-LDF-TE ARM LENGTH 24” 40” 60” HIGH FAN CFM MED LOW MAX AMPS 5750 4700 3200 2.2 SHIPPING WT (LBS) 31 lbs. 38 lbs. 44 lbs. LIST 274 341 366 Optional Modular Lights Light Features • Plugs into embedded outlet in arm • On/Off switch and wire guard included • Bulb included with DKL-QH and DKL-FL Standard Models UPC# 686334 MODEL LIGHT HEAD TYPE MAX WATTS MAX LUMENS 446563 446570 484336 470865 DKL-INC DKL-QH DKL-FL DKL-LED Incandescent Quartz Halogen Florescent LED 300 500 55 12 3,700 11,000 3,000 960 AVE. BULB SHIPPING LIFE (HRS) WT (LBS) 2,000 2,000 10,000 50,000 5 lbs. 6 lbs. 7 lbs. 5 lbs. LIST 74 111 129 412 Low Velocity “Navy Style” Workstation Fan WALL MOUNT Features • 12” all metal, gray powder coated fan that • Fan head tilts 90° in horizontal and vertical plane can be wall, ceiling or bench mounted • Meets OSHA standards • Direct wire electrical connection • 1 year limited warranty • Toggle switch Designed to circulate air in confined spaces aboard US Navy ships Navy spec “MIL-F-68F” Standard Models SIZE B E N C H CEILING MOUNT MOUNT 12” UPC# 686334 MODEL 870894 N-12 MOTOR HP 1/12 CFM / RPM HIGH LOW 1540 / 1350 930 / 750 AMPS HIGH SHIPPING WT. (LBS) LIST 0.6 12 295 Portable High Pressure Misters 42 Generates a fine water vapor or “fog” mist that can reduce air temperatures up to 30°F. 1000 psi pump system designed to run one master fan and up to two satellite fans. Modular system components can be combined to construct a portable misting system using 24” or 30”, oscillating or nonoscillating fans. Fans can be operated with or without misting. Application Shots High Pressure Pump System • 120 Volt, 11-Amp, 1/2 HP motor and CAT (brand) triplex plunger pump that delivers ½ of a gallon of water per minute at 1000 psi. Pump has onboard, adjustable, regulating un-loader for pressure control and pump protection; oil level sight glass and bypass system • Pressure gauge installed near the regulator for easy pressure adjustment for variable nozzle set-ups (more or less mist can be produced with up to 24 anti-drip nozzles, nozzles are .008") • 5 micron canister water filter • Automatic low water pressure shut-off • Female coupler for standard 5/8" water hose (water input supply) • Three male quick disconnects for water supply to master unit and two additional satellite fans. • 3-position DPDT switch (fan only, off, fan & pump) • GFCI integral to cordset protects total system from leakage current • Pump box lid hinged for easy access with 2 stainless steel latches for lock-down Master Pump Cart (HPM-PCT) • Black powder-coated cart with 10" all-terrain non-pneumatic wheels • Permanently mounted pump container • Cord wraps and support handle included on the column upright assembly • Pump cart unit comes with stainless steel closed-loop misting ring ported for 8 nozzles (shipped with 8 -.008" anti-drip nozzles and 4 plugs) for the master fan. Satellite Pedestal Base (HPM-P) • Black powder-coated column and base with 10" all-terrain non-pneumatic wheels • Satellite fan pedestal base comes with 25’ of 2500 psi rated hose and stainless steel closed-loop misting ring ported for 8 nozzles (shipped with 8 - .008" anti-drip nozzles and 4 plugs) Portable High Pressure Misters Oscillating & Non-Oscillating Misting Fan Heads for Master & Satellite Units Features • 24” and 30” - oscillating and non-oscillating • Pull chain switch • White powder coated steel guards with 9” plastic shroud • Steel hub/spider & aluminum paddle blades • Meets all OSHA standards • 1 year limited warranty • Oscillating model oscillates in a 90° arc or can be locked in a fixed position • Metal gears in the oscillating mechanism allow the fan to operate at a maximum 30° downward tilt Motor Specifications • 1-Phase • 1/4 HP • Ball bearing • Totally enclosed • 120V • 2-Speed • Permanently lubricated • Permanent split capacitor Standard Models NON-OSCILLATING SIZE CFM WT. AMPS OSCILLATING UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST 24” 6800 / 5000 44 lbs. 3.0 867108 HPM 24H 436 867122 HPM 24H-O 606 30” 7900 / 6000 48 lbs. 3.4 867115 HPM 30H 459 867139 HPM 30H-O 631 Master Pump Cart & Satellite Fan Mount HPM-P SATELLITE PEDESTAL BASE WITH 10” WHEELS (Shown with 24” Fan Head) HPM-PCT MASTER CART MISTING PUMP SYSTEM HPM-P SATELLITE PEDESTAL BASE GCFI PLUG FOR SATELLITE MISTING HEADS Standard Models UPC# 686334 MODEL DESCRIPTION LIST 867146 HPM-PCT Master Cart Misting Pump System with 10” Wheels, Cart Base Stand & Upright Column, and (1) 8-Nozzle Misting Ring 3613 868228 HPM-P Satellite Pedestal Base with 10” Wheels, Pedestal Base & Upright Column, (1) 8-Nozzle Misting Ring, and 25’ of High Pressure Water Hose to connect to Master Pump Cart 876 874878 HPM-GFCI GFCI for Satellite Misting Heads 150 43 Permanent Mount High Pressure Misters 44 Generates a fine water vapor or “fog” mist, that can reduce air temperatures up to 50°F 1000 psi pump system designed to run one master fan and up to two satellite fans (HPM-PU) Modular system components can be combined to construct a portable misting system using 24” or 30” oscillating or non-oscillating fans Fans can be operated with or without misting (HPM-W) High Pressure Pump System • 120 Volt, 11-Amp, 1/2 HP motor and CAT (brand) triplex plunger pump that delivers 1/2 of a gallon of water per minute at 1000 psi. Pump has onboard, adjustable, regulating un-loader for pressure control and pump protection; oil level sight glass and bypass system • Pressure gauge installed near the regulator for easy pressure adjustment for variable nozzle set-ups (more or less mist can be produced with up to 24 anti-drip nozzles, nozzles are .008”) • 5 micron canister water filter • Automatic low water pressure shut-off • Female coupler for standard 5/8" water hose (water input supply) • Three male quick disconnects for water supply to master unit and two additional satellite fans • 3-position DPDT switch (fan only, off, fan & pump) • GFCI integral to cordset protects total system from leakage current • Pump box lid hinged for easy access with 2 stainless steel latches for lock-down Master Pump Unit (HPM-PU) • Black powder-coated pump container • Pump unit can be mounted to a wall or pole (4” to 8” diameter) with optional wall/pole mounting kit (HPM-PUM) or on a user supplied table or shelf Cut-Away Shots PUMP INSIDE CUT-AWAY VIEW UNIT POWER SWITCH MAIN WATER HOSE INLET UNIT POWER CORD SATELLITE FAN WATER HOSE QUICK CONNECTS PUMP BACK PANEL Permanent Mount High Pressure Misters Oscillating & Non-Oscillating Misting Fan Heads for Master & Satellite Units Features • 24” and 30” oscillating and non-oscillating • Pull chain switch • White powder coated steel guards with 9” plastic shroud • Steel hub/spider & aluminum paddle blades • Meets all OSHA standards • 1 year limited warranty • Oscillating model oscillates in a 90° arc or can be locked in a fixed position • Metal gears in the oscillating mechanism allow the fan to operate at a maximum 30° downward tilt Motor Specifications • 1-Phase • 1/4 HP • Ball bearing • Totally enclosed • 120V • 2-Speed • Permanently lubricated • Permanent split capacitor Standard Models NON-OSCILLATING OSCILLATING SIZE CFM WT. AMPS UPC# 686334 MODEL LIST UPC# 686334 MODEL LIST 24” 6800 / 5000 44 lbs. 3.0 867108 HPM 24H 436 867122 HPM 24H-O 606 30” 7900 / 6000 48 lbs. 3.4 867115 HPM 30H 459 867139 HPM 30H-O 631 Master Pump & Mount Components UPC# 686334 MODEL DESCRIPTION LIST 868204 HPM-PU Master Pump Unit (For use with up to three fan heads) 3014 868211 HPM-PUM Master Pump Wall Mounting Bracket (For use with Master Pump Misting Unit) 184 867177 HPM-W Wall / Pole Mounting Bracket (Includes One 8-Nozzle Misting Ring and 25’ of High Pressure Water Hose to connect to Master Pump Misting Unit) 601 867191 HPM-C Ceiling / Bench Mounting Bracket (Includes One 8-Nozzle Misting Ring and 25’ of High Pressure Water Hose to connect to Master Pump Misting Unit) 570 867184 HPM-I I-Beam Mounting Bracket (Includes One 8-Nozzle Misting Ring and 25’ of High Pressure Water Hose to connect to Master Pump Misting Unit) 606 Note: • Wall mount (HPM-W) and master pump wall mounting bracket (HPM-PUM) can bolt to a wall or mount to a 4”, 6” or 8” pole with U-bolts (not supplied). I-beam & ceiling mount requires 1-1/2” or longer pipe nipples for assembly (not supplied). 45 Portable 18” Self Contained Power Mister SELF CONTAINED MISTING SYSTEM WITH WATER PUMPED FROM A 10 GALLON COOLER. 46 Features PM-18FO PM-18S PM-18C Note: Cooler lid not included. Standard Features • Toggle Switch - fan only or fan & mist • SJT type cord - 3 conductor - 18’ long with GFCI plug • 18” Aluminum blade • Spiral front and rear wire guards • 85 psi diaphragm pump • Meets OSHA standards / 1 year limited warranty. Motor Specification • 1-Phase, 120 Volt • 1-Speed, 1/8 HP • Totally enclosed • Sleeve bearing • Permanent split capacitor • Permanently lubricated Power cutoff tip switch and GFCI plug for extra safety. 18” Fan & Pump Lid for 10gal Igloo Cooler UPC# FAN MOTOR SHIPPING MODEL TYPE CFM AMPS LIST 686334 SIZE HP WT (LBS) 855471 PM-18S HAND CARRY 30 1016 18” 1/8 5750 2.2 855495 PM-18C CART 38 1292 UPC# 686334 MODEL SHIPPING WT. (LBS.) LIST 855525 PM-18FO 28 871 16” Portable Workstation Evaporative Cooler 15°F - 25°F OF EVAPORATIVE COOLING - PLUS 6°F - 8°F OF WIND CHILL COOLING EVAPORATIVE COOLING TEMPERATURE DROPS FRONT Patented RELATIVE HUMIDITY AIR TEMPERATURE 10% 30% 50% 80o -22o -16o -10o 90o -25o -18o -12o 100o -29o -21o -14o 110o -32o -23o -15o 42 Gallon internal water reservoir that allows the unit to operate approximately 8 hours without being connected to an external water source BACK Patented PROVIDES COOLING UP TO A 900 SQ. FT. AREA Features • Durable polyethylene housing features leakproof, one piece construction • Lowers temperatures 15-25 °F depending on climate conditions • Easy rolling poly on poly casters (EVAP16-3) • Shipped completely assembled, ready to use • Water level sight tube located on front of unit to indicate water level in tank • Manufactured in USA Stardard Models UPC# 686334 MODEL 874809 EVAP16-3 MOTOR HP UNIT AMPS 1/2 4.6 CFM HIGH MED LOW 2500 3500 3900 EFFECTIVE SQ. FT. INTERNAL WATER (Gallons) DIMENSIONS LxWxH (Inches) SHIPPING WEIGHT (LB) LIST 900 42 23 x 37.5 x 59 145 2455 36” & 48” Portable Evaporative Coolers 15°F - 25°F OF EVAPORATIVE COOLING - PLUS 6°F - 8°F OF WIND CHILL COOLING 47 EVAPORATIVE COOLING TEMPERATURE DROPS AIR RELATIVE HUMIDITY TEMPERATURE 10% 30% 50% 80 -22 o -16 -10o 90o -25o -18o -12o 100o -29o -21o -14o 110 -32 -23 -15o o o o o o BACK Patented FRONT Patented 48” Two Speed 36” Single or Three Speed (EVAP48-2) provides cooling up to 4,000 sq. ft. (EVAP36-1 or EVAP36-3) provides cooling up to area. 40 Gallon reservoir capacity. 2500 sq. ft. area. 32 Gallon reservoir capacity. 36” UNIT IS THIN ENOUGH TO FIT THROUGH A STANDARD DOOR. Features • 36" and 48" non hazardous location models feature 3/4" garden hose connections for longer operating times. • Durable polyethylene housing features leakproof, one piece construction • Lowers temperatures 15-25 °F depending on climate conditions • Heavy Duty, polyolefin casters on EVAP48-2 evaporative coolers • New 3 blade fan blade for quieter operation. • 120V operation • Manufactured in USA. Shipped completely assembled, ready to use Standard Models UPC# 686334 MODEL MOTOR HP UNIT AMPS CFM HIGH MED LOW 9600 EFFECTIVE SQ. FT. INTERNAL WATER (Gallons) DIMENSIONS LxWxH (Inches) SHIPPING WEIGHT (LB) LIST 4000 874816 EVAP36-1 1/2 12.4 2500 32 32 x 62 x 67 235 874823 EVAP36-3 1/2 11.5 9600 6600 4800 2500 32 32 x 62 x 67 245 4375 874847 EVAP48-2 1 13.7 22000 ---- 11000 4000 40 36 x 74 x 86 405 6200 Hazardous Location - Standard Models Hazardous Location - Specific Features • All switches, motors, and cord connections are sealed to prevent sparking in combustible locations. • Shipped completely assembled, ready to use • 120/240V operation • Manufactured in USA CONTROL Patented FRONT Patented Hazardous Location - Standard Models UPC# 686334 MODEL MOTOR UNIT HP AMPS 874830 EVAP36-HAZ 1/2 13.4 874854 EVAP48-HAZ 1 18 EFFECTIVE SQ. FT. INTERNAL WATER (Gallons) DIMENSIONS LxWxH (Inches) SHIPPING WEIGHT (LB) LIST 9600 2500 32 32 x 62 x 67 330 12924 20000 4000 40 36 x 74 x 86 460 15640 CFM HIGH MED LOW Portable Air Conditioning Units 48 PAC-13 PAC-21 & 29 PAC-37 Standard Models SPECIFICATIONS MODEL PAC-13 PAC-21 PAC-29 PAC-37 PAC-60* COOLING CAPACITY BTU VOLTS PHASE HZ 13,200 120 1 60 19,500/21,000 208/240 1 60 28,000/29,000 208/240 1 60 36,000/37,000 208/240 1 60 60,000 208/240 1 60 DIMENSION (WXDXH) INCHES 17.5 x 19.9 x 43.3 22 x 24.4 x 50.4 22 x 24.4 x 50.4 26 x 33.3 x 52.4 28.9 x 51.5 x 59.8 WEIGHT CURRENT BREAKER SIZE POWER CONSUMPTION LB AMP AMP KW 132 11.5 15 1.4 198 11/10 15 2.3 209 15/14 20 3.1 254 20/19 30 4.4 661 30/29 50 7 COMPRESSOR INPUT EVAPORATOR AIR FLOW (HIGH/LOW) CONDENSER AIR FLOW AIR FILTER NEMA PLUG POWER CORD GAUGE POWER CORD LENGTH REFRIGERANT OPERATING TEMP. EXHAUST DUCT DIAM. MAXIMUM DUCT LGTH. CONDENSATE TANK LIST PRICE KW 1.2 2 2.4 3.5 4.8 CFM 357/285 464/393 571/500 882/776 2000/1870 CFM 610 Alum. 5-15P 12AWG 12 6 R410A 64-113 12 16 3.17 5,640 857 Alum/Vinyl 6-15P 14 6 R410A 64-113 16 25 3.17 7,480 1142 Alum/Vinyl 6-20P 12 6 R410A 64-113 16 25 3.17 8,600 1660 Alum/Vinyl 6-30P 10 10 R410A 64-113 16 60 3.17 11,490 3600 Alum/Vinyl 6-50P 6 10 R410A 64-113 16 100 3.17 22,600 POWER SUPPLY ---- TYPE AWG FT. ---- F INCHES FT. GAL. ---*Image for PAC-60 not shown. Portable Water Cooled Split Air Conditioning Features • Compressor time delay • Self-diagnostic • Condensate pump • Compressor overload protection • Defrost cycle • Washable filter • Thermostat • Off-timer Standard Models and Specifications PACWS-22 SPECIFICATIONS Model PACWS-22 COOLING CAPACITY BTU 22,000 BTU Volts 240 Phase 1 REFRIGERANT ---- R-410A AMP RATING AMP 12.4 AMP POWER CONSUMPTION KW 2.6 KW TEMPERATURE RANGE F 64-113 F MAXIMUM HOSE LENGTH Feet 100 FT. POWER SUPPLY INDOOR UNIT DIMENSION Inches 28 x 14 x 31 OUTDOOR UNIT DIMENSION Inches 26 x 11 x 20 INDOOR UNIT WEIGHT LBS 198 OUTDOOR UNIT WEIGHT LBS 44 FAN SPEEDS ---- 2 AIRFLOW HIGH/LOW CFM 671/530 DB RATING HIGH/LOW(3’) ---- 58/54 LIST 14,300 Portable Utility Lights 5 Types of Light Sources Incandescent 49 Quartz Halogen Uses commonly available and inexpensive, standard (R-40 or PAR) incandescent bulbs up to 300 Watt flood lights. High light output from weatherproof aluminum die-cast light heads - uses 500 Watt bulbs (included). Florescent Metal Halide Uses compact, low energy use, long life 55 Watt Florescent bulb(included) - shade remains Cool-to-the-Touch. Long lamp life - high light output - low energy usage per lumens produced -uses 100 Watt metal halide HID lamp (included). LED Longest Lamp Life Lowest energy usage per lumens produced. bulb(included) - shade remains Cool-to-the-Touch. Light Selection Chart & Illumination Levels LIGHT SOURCE: INCANDESCENT QUARTZ HALOGEN Florescent METAL HALIDE LED # OF LIGHT HEADS 1 2 1 2 1 2 1 2 1 2 MAX. WATTAGE 300 600 500 1,000 55 110 100 200 12 24 MAX. LUMENS 3,700 7,400 11,000 22,000 3,000 6,000 9000 18000 960 AVG. BULB LIFE (HRS.) 2,000 WIRE GUARD INCLUDED BULB INCLUDED Measured Footcandles & Distance from Light Source (open area) 1,920 2,000 10,000 15000 50,000 Yes Yes Yes Yes Yes No Yes Yes Yes Yes 5’ ft. LIGHT SOURCE ILLUMINATION LEVELS 44.9 82.6 74.4 137.3 20.0 35.8 562 890 224.5 456.8 10’ ft. 20.8 38.9 36.1 65.9 8.7 14.8 148.1 244.1 121.4 258.8 20’ ft. 7.8 14.3 13.2 24.6 3.1 5.1 66.5 113.3 29.0 64.0 30’ ft. 4.0 6.9 6.6 12.3 1.7 2.5 47.1 68.7 14.2 31.4 6 Types of Bases and Mounts Pedestal Base Cart Base Tripod Base • 16 gauge round steel tube construction • Height adjustable from 5’-6” to 8’-6” high • 18” heavy duty steel base • 16 gauge round steel tube construction • Height adjustable from 5’ to 8’ high • 10” diameter wheels • 20 gauge round steel tube construction • Height adjustable from 3’ to 6’-6” high • Base covers 46” diameter area Floor Base • 12 ga. steel base • Handle included • Base covers 16” diameter area Clamp-On Mount • Clamp secures light head to most surfaces up to 3” Magnet Mount • 210 lb. magnetic strength • 1/4” steel arm • Extends 6” from mounting surface ATTENTION Florescent and HID lamps contain mercury. Dispose of these lamps according to local, state, or federal laws. For further information on local, state, or other requirements for disposal of mercury-containing lamps, see http://www.lamprecycle.com. Portable Utility Lights 50 Incandescent, Florescent, and LED Series Features • Chip resistant safety yellow & black powder coating finish for high visibility and durability • 15’ long 18/3 SJT, 120V cordset with NEMA 15-5 grounded plug • Aluminum shade is 9-3/8” long with 7-3/4” diameter opening and will swivel 300° horizontally and 210° vertically • On/Off switch & wire guard included on each light head • ETL C/US Listed for indoor applications only Lamp Specifications • INC models do not include an incandescent bulb. • FL models include a 55w spiral Florescent bulb and internal reflector for maximum illumination at shorter distances. • LED models are designed with an acrylic lens cover over each of the 12 single Watt LED emitters. Constructed with narrow 15° angle beam generating 960 lumens per bulb. Florescent P-FL-2 LED T-LED-2 Incandescent C-INC-2 Incandescent M-INC-1 Florescent CP-FL-1 LED F-LED-1 Standard Models UPC# 686334 MODEL 479967 479974 479899 479905 480024 480031 480109 480147 480185 479981 479998 479929 479936 480062 480079 480123 480161 480208 487245 487252 487269 487276 487283 487290 487306 487313 487320 P-INC-1 P-INC-2 C-INC-1 C-INC-2 T-INC-1 T-INC-2 F-INC-1 CP-INC-1 M-INC-1 P-FL-1 P-FL-2 C-FL-1 C-FL-2 T-FL-1 T-FL-2 F-FL-1 CP-FL-1 M-FL-1 P-LED-1 P-LED-2 C-LED-1 C-LED-2 T-LED-1 T-LED-2 F-LED-1 CP-LED-1 M-LED-1 LAMP SOURCE BASE TYPE TOTAL MAX WATTS # OF LIGHT HEADS WT. (LBS.) LIST 300 600 300 600 300 600 300 300 300 55 110 55 110 55 110 55 55 55 12 24 12 24 12 24 12 12 12 1 2 1 2 1 2 1 1 1 1 2 1 2 1 2 1 1 1 1 2 1 2 1 2 1 1 1 35 39 31 35 13 17 8 7 6 35 39 31 35 13 17 8 7 6 37 42 33 38 15 20 10 9 8 246 319 319 392 135 209 141 111 123 324 466 399 539 214 356 221 189 202 526 881 600 954 416 771 422 391 403 PEDESTAL CART INCANDESCENT TRIPOD FLOOR CLAMP MAGNET PEDESTAL CART Florescent TRIPOD FLOOR CLAMP MAGNET PEDESTAL CART LED Note: All above models are shipped in ONE Carton TRIPOD FLOOR CLAMP MAGNET Individual Portable Light Components - Replacement Bulbs UPC# 686334 485050 470858 310598 310680 MODEL DESCRIPTION Watts USED WITH SSE-55 LED-12 QHL-500 MH-100 Florescent Bulb LED Bulb Quartz Halogen Lamp Metal Halide Bulb 55 12 500 100 ALL FL Light heads ALL LED Light heads ALL QH Light heads ALL MH Light heads WT. (LBS.) 1 1 1 1 LIST 50 281 15 92 Portable Utility Lights Quartz Halogen and Metal Halide Series Features • Chip resistant safety yellow & black powder coating finish for high visibility and durability • 15’ long 18/3 SJT, 120V cordset with NEMA 15-5 grounded plug • Shade will swivel 300° horizontally and 210° vertically • On/Off switch, bulb, & wire guard included on each light head Lamp Specifications • QH models include a 500W Quartz Halogen bulb and weatherproof die cast aluminum light head with impact resistant lens. Each shade size is 9” wide x 7-1/4” high x 9-3/4” deep. ETL C/US listed for semi-protected outdoor use. • MH models include a 100W Metal Halide bulb and are designed with an aluminum shade measuring 11-3/4 long with a 7-3/4” opening. Constructed with interior electronic ballast and polished aluminum reflector for the highest lumen output of all the portable light series. ETL C/US listed for indoor use. Quartz Halogen P-QH-2 Quartz Halogen T-QH-2 Metal Halide C-MH-2 Quartz Halogen M-QH-1 Quartz Halogen CP-QH-1 Metal Halide F-MH-1 Standard Models UPC# 686334 479868 479875 479912 479882 480048 480055 480116 480154 480192 480000 480017 479943 479950 480086 480093 480130 480178 480215 MODEL P-QH-1 P-QH-2 C-QH-1 C-QH-2 T-QH-1 T-QH-2 F-QH-1 CP-QH-1 M-QH-1 P-MH-1 P-MH-2 C-MH-1 C-MH-2 T-MH-1 T-MH-2 F-MH-1 CP-MH-1 M-MH-1 LAMP SOURCE BASE TYPE PEDESTAL CART QUARTZ HALOGEN TRIPOD FLOOR CLAMP MAGNET PEDESTAL CART METAL HALIDE TRIPOD FLOOR CLAMP MAGNET TOTAL MAX WATTS 500 1000 500 1000 500 1000 500 500 500 100 200 100 200 100 200 100 100 100 # OF LIGHT HEADS 1 2 1 2 1 2 1 1 1 1 2 1 2 1 2 1 1 1 WT. (LBS.) 36 41 32 37 14 19 9 8 7 38 45 34 41 16 23 11 10 9 LIST 251 313 324 386 141 202 148 117 129 710 1182 785 1255 600 1072 607 576 588 Individual Portable Light Components - Light heads and Bases UPC# 686334 MODEL 480222 480321 480307 480345 487368 487375 480291 480338 480314 480352 480277 480284 480239 480260 480246 480253 INC-1 INC-2 FL-1 FL-2 LED-1 LED-2 QH-1 QH-2 MH-1 MH-2 PED CRT TRI FLR CLP MAG TYPE DESCRIPTION INCANDESCENT Florescent LIGHTHEAD LED QUARTZ HALOGEN METAL HALIDE BASE PEDESTAL CART TRIPOD FLOOR CLAMP MAGNET TOTAL MAX WATTS # OF LIGHT HEADS WT. (LBS.) LIST 300 600 55 110 12 24 500 1000 100 200 - 1 2 1 2 1 2 1 2 1 2 - 4 7 5 8 6 9 5 10 7 14 31 27 9 4 2 3 77 175 159 319 410 811 111 186 540 1025 196 221 93 74 37 49 51 Heavy Duty Portable Utility Lights 52 Quartz Halogen Light Heads • (2) 500 Watt weatherproof die cast aluminum light heads with 15’ long, 3-conductor cord, and plug • Quartz halogen lamps • Impact resistant lens • On-Off switch • OSHA approved wire guards and bulb included with each light head CART LIGHT STAND WITH GFCI TRIPOD LIGHT STAND PUL-2000Q-TC PUL-1000Q-TC Cart Light Stand With GFCI Features • • • • Upright adjust from 5’ to 8’ high 10" diameter rubber wheels 15' all-weather, water and oil resistant SJTW 18/3 cordset and molded NEMA 5-15 plug Weatherproof electrical box with a 15 Amp GFCI duplex receptacle Tripod Light Stand Features • Square 12 gauge steel tubing construction • Adjustable legs fold up for storage, fold flat for sand bagging or can be set and locked at 6”, 12”, 18” or 24” ground clearances • Height adjustable from 5’ to 11’ high • Safety stop mechanism, at full extension, prevents the mast from being pulled out of the base • 15' all-weather, water and oil resistant SJTW 18/3 cordset and molded NEMA 5-15 plug Standard Models UPC# 686334 MODEL BASE TYPE BULBS 446785 446839 446846 PUL-1000Q-CD PUL-1000Q-TC PUL-2000Q-TC CART TRIPOD TRIPOD 500W Quartz Halogen WATTS VOLTS 1000 MAX LUMENS 22,000 120 2000 AVE. BULB LIFE (HRS) SHIPPING WT. (LBS) LIST 2,000 50 41 45 650 686 927 44,000 Commercial Duty Portable Utility Lights CL 300 (Incandescent - Clamp on Model) Features • Ceramic socket will accept incandescent bulbs A-19, R-40 or PAR bulbs up to 300 Watt. Fixture will also accept infrared heat lamps up to 250 Watt • 8’ long - 18/3 SPT cordset with NEMA 5-15 plug Standard Models UPC# 686334 MODEL BASE TYPE BULBS MAX. WATTS VOLTS MAX LUMENS AVE. BULB LIFE HOURS SHIPPING WT. (LBS) LIST 445078 CL-300 CLIP-ON 300W Incandescent 300 120 11000 2000 3 52 All models are shipped in ONE carton. Bulb not included. Machine Tool Lights Water Resistant Florescent Tube Lights 53 Internal Ballast with Cordset Remote Ballast Remote Ballast with Cordset Features • ETL C/US Listed for NEMA Type 13 applications - oil / water / coolant spray areas (not submersible) and dusty atmospheres. • Available with a durable, lightweight, economical, shatter resistant polycarbonate tube housing • Model 21-TLB-IB-C includes a borosillicate (or glass) lens for greater scratch & chemical resistance • Stainless steel mounting hardware and Florescent bulb are included • 8’ long, 18/3 SJTOW cord with NEMA 5-15 plug on models with cords • EOB units with internal ballast are factory wired for 120V w/ 8’ long cordset. Units can be field converted for direct wiring for 90V to 277V. Terminal block provided for easy wire installation. Standard Models UPC# 686334 MODEL # 282345 15-TLP-IB-C 282130 21-TLB-IB-C 282321 21-TLP-IB-C 482943 23-TLP-EOB-C 482950 29-TLP-EOB-C 484343 29-TLP-A MODEL SERIES LUMENS OVERALL LENGTH TUBE MATERIAL 1250 15” Polycarbonate Yes 9 459 2900 21” Glass Yes 10 526 36 2900 21” Polycarbonate Yes 10 491 18 1250 23” Polycarbonate Yes 6 393 2900 29” Polycarbonate Yes 7 416 4300 29” Polycarbonate Yes 7 441 8400 52” Polycarbonate Yes 12 607 1250 23” Polycarbonate Yes 6 386 WATTS 18 REMOTE BALLAST WITH CORDSET INTERNAL BALLAST WITH CORDSET 36 52-TLP-A 482936 23-TLP-24VDC 120V 50 120V 100 INTERNAL BALLAST BALLAST SHIIPPING LIST INCLUDED WT. (LBS) 90 to 277V 36 REMOTE BALLAST 282499 VOLTS 18 24VDC* * Includes 2 ft. lead wires Accessories - Magnetic Base and Replacement Lamps MAGNETIC BASE UPC# 686334 MODEL DESCRIPTION USED WITH WT. (LBS.) LIST 445757 TL-MB Magnetic Bases & Fasteners (Pair) ALL Tube Lights 1 56 310338 TL-RB-18 Florescent Replacement Bulb, 18W, PL-L All 18 Watt Models 1 58 310086 TL-RB-36 Florescent Replacement Bulb, 36W, PL-L All 36 Watt Models 1 62 310826 TL-RB-50 Florescent Replacement Bulb, 50W, PL-L All 50 & 100 Watt Models 1 68 Heavy Duty Machine Tool Lights Incandescent 54 Features BH TYPE • Patented disc and collar swivel joints with adjustable bar knobs for securing arms into a variety of positions • Shades constructed of a 22 Gauge steel and arms made of 5/8" steel tubing, with reach from 25" to 44" • Charcoal gray powder coated finish • Horizontal or vertical bolt down mounting bracket • 10 amp rocker type on-off switch and lamp socket • Includes an 8' 18/3 SJTO Cordset with NEMA 5-15 molded grounded plug for 120V operation • FTT Model includes (2) 13-Watt Florescent twin tubes, internal white reflector, and protective acrylic lens • Bulb not included with BH, BP, or VCX Models BP TYPE Standard Models UPC# 686334 MODEL BULB TYPE BULB MAX AVE. BULB OVER-ALL WT. WATTS LIST DESCRIPTION LUMENS LIFE (HRS) REACH (LBS.) 381871 381895 381925 381956 442887 FTT TYPE 5-BH-701A 60W medium 55-BH-701A base A-19 66-BH-701A 55-BP-701A 75W medium Incandescent base A-19 66-BP-701A 100W medium 381215 55-VCX-701B base A-19, R-30 381314 66-VCX-701B or PAR 38 (2) 13W Twin 283632 66-FTT26-701B Florescent Tubes VCX TYPE 60 870 1,000 75 1220 750 100 1470 750 26 1800 10,000 25” 35” 44” 35” 44” 154 165 169 179 184 5 6 29” 189 6 38” 38” 197 9 349 Medium Duty, Flexible Arm, Incandescent, Machine Tool Lights Features • Chrome plated, flexible arm • 8’ 18/3 or 18/2 SPT cordset with molded plug • Turn knob on-off switch • Phenolic shade with spun Aluminum inner reflector on R - Series • Bulb not included Standard Models UPC# 686334 445764 442305 15-MC-901 12-R-M-3 MODEL BULB BASE 15-MC-901 12-R-M-3 25 Watt 60 Watt Vertical Bolt-on Base Magnetic Base MAX LUMEN 180 865 OVER-ALL REACH 15” 12” WT. (LBS) 2 3 LIST 74 129 Illuminated Florescent Magnifiers Features • 5", 8-diopter (3X power) magnifying clear lens for 200% magnification of an object with a focal length of 5" • Suspension spring balanced arm assembly allowing up to 45" reach, with finger tighten control knobs to lock arms and shade into position • 18/3-wire, grounded, 6’ cordset & molded NEMA 15-5 plug • Housing consists of a sturdy white plastic 8-1/2” shade with an on-off rocker switch and glare protection cover located on the top of the shade • Includes die-cast clamp-on base to attach to a flat surface up to 2-1/2” thick • Factory installed 22W, 120V, T-9 deluxe cool white circline Florescent lamp and protective lens Standard Models UPC# 686334 MODEL 485159 312035 45-MAG-W MAG-22W MAGNIFICATION POWER 3X BULB WATTS MAX LUMENS AVE. BULB LIFE (HRS) 22W. Circline 22 1800 16,000 22W., 120V., T-9 deluxe cool white circline replacement lamp OVER-ALL REACH SHIPPING WT. (LBS.) LIST 45” 10 1 222 29 Loading Dock Lights - LED Dock Light, Fully Assembled & Modular Light Head Features • Chip resistant safety yellow & black powder coating finish for high visibility and durability • 5’ long 18/3 SJT, 120V cordset with NEMA 15-5 grounded plug • On/Off switch & wire guard included on each light head • 1-1/2” square, 14-gauge, steel tubing • 3” x 5” x 3/16” mounting plate attached with (4) 3/8” bolts (not supplied) • (5) Lighting Sources to select from: Incandescent, Quartz Halogen, LED, Metal Halide, or Florescent • (3) Arms Lengths: 24”, 40”, or 60” (plus 25” Flex Arm, incandescent only) • VA models include (2) dock arms with a Vertical Adjustment bracket allowing outer arm to adjust from 300° horizontally and 210° vertically • All light heads will swivel 300° • Bulbs included with all light heads, except Incandescent models • ETL C/US Listed for indoor applications only, except QH models are semi-protected outdoor Light Selection Chart & Illumination Levels Dock arm made of 1-1/2” square steel tubing Stee l mo unti ng b rack et DESCRIPTION Electrical outlet embedded in the arm for direct plug connection from the shade On/Off switch & high temperature porcelain socket with a nickel plated copper screw shell Lamp contains NO Glass Material, each lens protected by an acrylic cap over each 1-watt emitter Incandescent Quartz Halogen LED Metal Halide Florescent MAX. WATTAGE 300 500 12 100 55 MAX. LUMENS 3,700 11,000 960 9,000 3,000 AVG. BULB LIFE (HRS.) 2,000 2,000 50,000 15,000 10,000 BULB INCLUDED No Yes Yes Yes Yes LIGHT SOURCE ILLUMINATION LEVELS Measured Footcandles & Distance from Light Source (inside trailer) 10’ ft. 15 28 121 142 9 20’ ft. 5 14 29 55 3 30’ ft. 3 8 14 18 2 40’ ft. 2 5 4 9 --- 50’ ft. --- 3 3 7 --- Dock Light Performance Testing We measured light levels (in footcandles) inside a 8' x 9' x 53' trailer with a wooden floor and ceiling and white fiberglass walls. A matrix of nine measurements were taken at five work plains inside the trailer. Averages were figured along the center work plane of the trailer. These charts measure the overall quality of truck trailer illumination from a selection of light sources. Many other factors such as: cost of energy, safety, availability of fixtures, cost of labor and replacement lamps should figure into your final decision. Light Source and Color Characteristics 10 ft. 20 ft. 30 ft. 40 ft. 50. ft 100W Metal Halide (Bright White) 142 55 18 9.1 7.3 12W LED (Cool White) 121 29 14 3.7 3.2 500W Quartz Halogen (Bright White) 28 14 8 5.3 3.1 300W Incandescent (Off White) 15 5 3 2.1 ---- 55W Florescent (Bright White) 9 3 2 ---- ---- Note: Above measurements are measured in footcandles 55 Loading Dock Lights - Fully Assembled Standard Duty Loading Dock Arms (Light Head and Arm Bolted Together and Shipped in One Carton) 56 Standard Models UPC# 686334 MODEL ARM LENGTH # OF ARMS 446648 DKL-24-A 24” 1 MAX WATTS WT. (LBS.) LIST 10 172 19 179 14 189 17 227 INCANDESCENT Incandescent 385404 DKL-25-FLX 25” 1 446655 DKL-40VA-A 40” 2 446662 DKL-60VA-A 60” 2 300 QUARTZ HALOGEN 446709 DKL-24-QH-A 24” 1 11 202 446716 DKL-40VA-QH-A 40” 2 15 227 459587 DKL-40VA-SQH-B 40” 2 7 353 446723 DKL-60VA-QH-A 60” 18 264 500 2 LED Quartz 470827 DKL-24-LED 24” 1 470834 DKL-40VA-LED 40” 2 11 447 15 464 470841 DKL-60VA-LED 60” 2 18 502 13 583 17 613 2 21 650 11 221 15 246 18 282 12 METAL HALIDE 446730 DKL-24-MH-A 24” 1 446747 DKL-40VA-MH-A 40” 2 446754 DKL-60VA-MH-A 60” 100 Florescent Metal Halide 470797 DKL-24-FL-A 24” 1 470803 DKL-40VA-FL-A 40” 2 470810 DKL-60VA-FL-A 60” 2 55 Ceiling Mounted Incandescent Flex Arm Features • Flexible elastomer arm moves when hit and then returns light to original position • Ceramic socket will accept incandescent bulbs, R-40 or PAR bulbs up to 300W • On-off toggle switch on light head Standard Models UPC# 686334 MODEL ARM LENGTH WATTS VOLTS MAX LUMENS AVE. BULB LIFE (HRS) WT. (LBS.) LIST 385404 DKL-25-FLX 25” 300 120 3,700 2000 7 179 *Bulb not included. Light Head Accessories Standard Models LG-1 UPC# 686334 MODEL DESCRIPTION WATTS USED WITH WT. (LBS.) LIST 331326 LG-1 Lamp Guard - INC, LED, or FL Fixtures 2 35 485050 SSE-55 Florescent Bulb 55 ALL FL Light heads 1 50 470858 LED-12 LED Bulb 12 ALL LED Light heads 1 281 310598 QHL-500 Quartz Halogen Lamp 500 ALL QH Light heads 1 15 310680 MH-100 Metal Halide Bulb 100 ALL MH Light heads 1 92 Note: Lamp guards are included with every dock light fixture. Modular Loading Dock Lights Modular Lights 57 24” / 40” / 60” arms that can be used with one of 5 light heads & optional fan. Features • 14” long, 18/3 conductor cord plugs into electrical junction box on arm • On/Off switch & wire guard included with each light head • Bulb included with all light heads except DKL-INC Standard Models UPC# 686334 446563 446570 470865 446600 484336 MODEL LIGHT HEAD TYPE DKL-INC DKL-QH DKL-LED DKL-MH DKL-FL Incandescent Quartz Halogen LED Metal Halide Florescent MAX WATTS 300 500 12 100 55 MAX LUMENS 3,700 11,000 960 9,000 3,000 AVE. BULB LIFE (HRS) 2,000 2,000 50,000 15,000 10,000 SHIP WT. (LBS) 5 lbs. 6 lbs. 7 lbs. 10 lbs. 7 lbs. LIST 74 111 412 534 129 Mounting Arms The outer arm on 40” & 60” arms will swing 300° in horizontal plane & 210° in vertical plane Features 24” ARM • 1-1/2" square, 14 Gauge, steel tubing • 3" x 5" x 3/16” mounting plate attaches with (4) 3/8" bolts • 5' long, 18/3 SJTW conductor cord and NEMA 5-15 grounded plug Standard Models 40” & 60” ARM UPC# 686334 446532 446549 446556 446532 446617 446624 MODEL NUMBER DKL-24-ARM DKL-40VA-ARM DKL-60VA-ARM 24-LDA** 40-LDA** 60-LDA** ARM LENGTH 24” 40” 60” 24” 40” 60” **Indicates heavy duty dock arms. TOTAL # OF ARMS 1 2 2 1 3 3 SHIPPING WT. (LBS) 11 lbs. 18 lbs. 24 lbs. 11 lbs. 18 lbs. 24 lbs. LIST 92 117 148 92 159 184 Loading Dock Arm, Fan, & Light Head The outer arm on 40” & 60” arms will swing 300° in horizontal plane & 210° in vertical plane Features • 18” high velocity circulator, with 3 speed, 1/8 HP, 115V, 1phase permanently lubricated, totally enclosed, PSC motor • Modular fan plugs into electrical outlet on arm • Coated steel guards and aluminum blades. Heavy Duty Models (Dock Arm & Light) STYLES HDL-24-INC HDL-40-INC HDL-60-INC HDL-24-QH HDL-40-QH HDL-60-QH ARM LENGTH 24” 40” 60” 24” 40” 60” LIGHT TYPE TOTAL # OF ARMS 1 3 3 1 3 3 Incandescent Quartz Halogen SHIPPING WT. (LBS) 16 24 30 17 25 31 LIST 166 233 258 202 270 294 Fan Head Only UPC# 686334 797184 MODEL NUMBER LDF-18-TE HIGH 5750 CFM MED 4700 LOW 3200 AMPS HIGH 2.2 SHIP WT. 20 lbs. LIST 182 Heavy Duty Modular Loading Dock Lights 24” / 40” / 60” arms that come with incandescent or quartz halogen light heads and can be used with an optional fan. 58 Mounting Arms Features • 3" x 5" x 3/16” mounting plate attaches with (4) 3/8" bolts • 5' long., 18/3 SJTW conductor cord and NEMA 5-15 grounded plug • 1-1/2” square, 14 Gauge, steel tubing Light Head Features • 18” long, 18/3 conductor cord plugs into electrical junction box on arm • On/Off switch & wire guard included with each light head • Bulb included with all light heads except DKL-INC Modular Fan Features • 18" high velocity circulator, with 3 speed, 1/8 HP, 115V, 1 phase, permanently lubricated, totally enclosed, PSC motor • Modular fan plugs into electrical outlet on arm • Coated metal guard. Aluminum blades Standard Models STYLES ARM LENGTH HDL-24-INC 24” HDL-40-INC 40” HDL-60-INC LIGHT TYPE SHIP WT. (LBS) LIST 16 lbs. 166 24 lbs. 233 60” 30 lbs. 258 HDL-24-QH 24” 17 lbs. 202 HDL-40-QH 40” 25 lbs. 270 HDL-60-QH 60” 60 lbs. 294 Incandescent Quartz Halogen Modular Loading Dock Lights LIGHT SOURCE TYPE DESCRIPTION Incandescent Quartz Halogen Metal Halide Florescent LED MAX. WATTAGE 300 500 100 55 12 MAX. LUMENS 3,700 11,000 9000 3000 960 AVG. BULB LIFE (HRS.) 2,000 2,000 15,000 10,000 50,000 BULB INCLUDED No Yes Yes Yes Yes LIGHT SOURCE ILLUMINATION LEVELS Measured Footcandles & Distance from Light Source (inside trailer) 10’ ft. 15 28 142 9 121 20’ ft. 5 14 55 3 29 30’ ft. 3 8 18 2 14 40’ ft. 2 5 9 --- 4 50’ ft. --- 3 7 --- 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : TPI Corporation -- Robert Aaron Cox Create Date : 2011:03:17 15:23:33-04:00 Modify Date : 2011:03:17 15:43:49-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:9ad9f8dc-bbdb-4466-9a1d-afab600ae1ef Document ID : xmp.did:748CDFC41245E0118A8EE83BA6493534 Original Document ID : adobe:docid:indd:40d7fcae-c168-11dd-ba37-8edf0833f21b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:738CDFC41245E0118A8EE83BA6493534 Derived From Document ID : adobe:docid:indd:40d7fcae-c168-11dd-ba37-8edf0833f21b Derived From Original Document ID: adobe:docid:indd:40d7fcae-c168-11dd-ba37-8edf0833f21b Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:A18E5C00C63CDF11A5FCF06A2222AC27, xmp.iid:A28E5C00C63CDF11A5FCF06A2222AC27, xmp.iid:3F34B3E95279DF11A9DB8FC8FE96478A, xmp.iid:4034B3E95279DF11A9DB8FC8FE96478A, xmp.iid:4EA03D6B8479DF1194A7B16E85FF87E2, xmp.iid:4FA03D6B8479DF1194A7B16E85FF87E2, xmp.iid:F2897396EE7EDF11B1F6D39D4B7FB4F7, xmp.iid:F3897396EE7EDF11B1F6D39D4B7FB4F7, xmp.iid:F4897396EE7EDF11B1F6D39D4B7FB4F7, xmp.iid:E64A4228EE82DF11B2E9D433ED4EC875, xmp.iid:F9729CF48583DF1192C194BD4D65B53E, xmp.iid:B89C5DBA3A85DF118F01B72B4620D0D2, xmp.iid:B99C5DBA3A85DF118F01B72B4620D0D2, xmp.iid:BA9C5DBA3A85DF118F01B72B4620D0D2, xmp.iid:6F2A354FE598DF1192D8F2DB881807A6, xmp.iid:E5DD3D4302A0DF11B667925BD52FB77A, xmp.iid:E6DD3D4302A0DF11B667925BD52FB77A, xmp.iid:E7DD3D4302A0DF11B667925BD52FB77A, xmp.iid:E8DD3D4302A0DF11B667925BD52FB77A, xmp.iid:EADD3D4302A0DF11B667925BD52FB77A, xmp.iid:EBDD3D4302A0DF11B667925BD52FB77A, xmp.iid:ECDD3D4302A0DF11B667925BD52FB77A, xmp.iid:29B0B6FE53A6DF11880AC7F1A157B139, xmp.iid:2AB0B6FE53A6DF11880AC7F1A157B139, xmp.iid:975D6B5720B2DF11979DB9B6FD0D3CE2, xmp.iid:985D6B5720B2DF11979DB9B6FD0D3CE2, xmp.iid:C0A6449468B4DF11BDB7922EFD43A8D8, xmp.iid:E0E63B9E05B6DF118C12BF04A17F01CA, xmp.iid:E1E63B9E05B6DF118C12BF04A17F01CA, xmp.iid:C469EE3299BADF11A6E7C1A8ADD9197A, xmp.iid:5DAAFEDC8BBBDF11A626FEF572D3E4CB, xmp.iid:98CC1A7D2ABCDF11869DF054B93D43B5, xmp.iid:FBAD3E3B63BFDF11A352863D52DD33A9, xmp.iid:FCAD3E3B63BFDF11A352863D52DD33A9, xmp.iid:2B8DAEE0DEC4DF11908B9563A7CF7ED2, xmp.iid:2C8DAEE0DEC4DF11908B9563A7CF7ED2, xmp.iid:3F785C7D9ED8DF118074E4D76627415A, xmp.iid:40785C7D9ED8DF118074E4D76627415A, xmp.iid:B769820A92E3DF11AF86CC19251224BA, xmp.iid:621113779BE3DF11AF86CC19251224BA, xmp.iid:74EB051088EBDF1189DEE27299E19A33, xmp.iid:C84C977419ECDF119E28AFF81CB4962F, xmp.iid:311797A414EDDF118C8D9601F63A88A1, xmp.iid:64C9D695BDEDDF11B5A3D5D4B8ED60C0, xmp.iid:76A86979A6EEDF1182EDBA9F0A2ECFEC, xmp.iid:6868339619F1DF1180DE82FFE77482F0, xmp.iid:7599E933A2F1DF119325C2FD812C1852, xmp.iid:F2C4A5FD85F2DF119A4D92A0A56E3080, xmp.iid:B25840D377F6DF119BDF8DC948058AA0, xmp.iid:8CAB52008FF6DF119BDF8DC948058AA0, xmp.iid:18817CE949F7DF11A8CAD1A0133AAA71, xmp.iid:0DD8133CE7F7DF118650F1F7B5798D81, xmp.iid:5FDC2C66ECF7DF118650F1F7B5798D81, xmp.iid:B5621030A3FCDF119A93D33B68A7B0D2, xmp.iid:7701B71FD1FCDF119A93D33B68A7B0D2, xmp.iid:9893E2F18AFDDF1186E8ACA40A46F343, xmp.iid:D1EFEDCC96FDDF1186E8ACA40A46F343, xmp.iid:BF5CBAE22EFEDF119CA6F59B3D2C7C26, xmp.iid:81813AAACD1DE011ADBBD86C329ECA04, xmp.iid:9DE4CC2F5A1EE011A385E5D5E6366C9E, xmp.iid:61AE5A715B1EE011A385E5D5E6366C9E, xmp.iid:B07209C81724E011973D9AC9CC5EF0C5, xmp.iid:3A248E831824E011973D9AC9CC5EF0C5, xmp.iid:ECA0F9A2CB24E0119B6D91F2AB2EE279, xmp.iid:F5121C540528E011A289CEC6F785149F, xmp.iid:DC433E73CD28E011BF6BE08C8707093E, xmp.iid:DBEA5573CD28E011BF6BE08C8707093E, xmp.iid:5828F2096C29E011AB10C2152B805CF3, xmp.iid:646D24DF7429E011AB10C2152B805CF3, xmp.iid:0D9C456F8429E011AB10C2152B805CF3, xmp.iid:A29391C2432AE0119EBFF157A999EF92, xmp.iid:56D71C7D442AE0119EBFF157A999EF92, xmp.iid:9EE094EA5A2DE011AA238101D5B1330E, xmp.iid:F7B2EC3E732DE011AE9FAF1D6DA18AD6, xmp.iid:8FB4493A7D2DE011AE9FAF1D6DA18AD6, xmp.iid:654B877B4E2EE011B75697527A90D24A, xmp.iid:CB46FC510E2FE011A5E7F72023B34FAB, xmp.iid:E019B884D52FE011B270B370B8394923, xmp.iid:1BF036E3D52FE011B270B370B8394923, xmp.iid:6A23E0047238E01186E39BE95578FD9F, xmp.iid:50E3C5B98338E01186E39BE95578FD9F, xmp.iid:FEA3130A3639E011AACB80CFADCDB42F, xmp.iid:D9596ECC4A39E011AACB80CFADCDB42F, xmp.iid:57323637D93AE01181D49159CC8DAE65, xmp.iid:C2C8B1FDAB3BE01183D394728DF07749, xmp.iid:718CDFC41245E0118A8EE83BA6493534, xmp.iid:728CDFC41245E0118A8EE83BA6493534, xmp.iid:738CDFC41245E0118A8EE83BA6493534, xmp.iid:748CDFC41245E0118A8EE83BA6493534, xmp.iid:447FA134B345E011B980E9A665467FE7, xmp.iid:80FD987BB545E011B980E9A665467FE7, xmp.iid:0081CD31B645E011B980E9A665467FE7, xmp.iid:9B9CA35DB645E011B980E9A665467FE7, xmp.iid:FB9F1DA5B645E011B980E9A665467FE7, xmp.iid:9EC91BE5B645E011B980E9A665467FE7, xmp.iid:F96BE721B745E011B980E9A665467FE7, xmp.iid:FA6BE721B745E011B980E9A665467FE7, xmp.iid:B7012DDDB745E011B980E9A665467FE7, xmp.iid:9E5C7482B945E011B980E9A665467FE7, xmp.iid:3FEFF7A8B945E011B980E9A665467FE7, xmp.iid:66464CF3B945E011B980E9A665467FE7, xmp.iid:69182E19BA45E011B980E9A665467FE7, xmp.iid:1F00FA2FBA45E011B980E9A665467FE7, xmp.iid:DEA9826FBA45E011B980E9A665467FE7, xmp.iid:9A1147ABBA45E011B980E9A665467FE7, xmp.iid:A82FF4CFBA45E011B980E9A665467FE7, xmp.iid:CAF115F6BA45E011B980E9A665467FE7, xmp.iid:79511427BB45E011B980E9A665467FE7, xmp.iid:CDCC4246BB45E011B980E9A665467FE7, xmp.iid:95BB0872BB45E011B980E9A665467FE7, xmp.iid:B1CEB88FBB45E011B980E9A665467FE7, xmp.iid:87F85DB1BB45E011B980E9A665467FE7, xmp.iid:0F83AC03BC45E011B980E9A665467FE7, xmp.iid:E1D6B721BC45E011B980E9A665467FE7, xmp.iid:E8974A5CBC45E011B980E9A665467FE7, xmp.iid:53A8077DBC45E011B980E9A665467FE7, xmp.iid:C8259ED3BC45E011B980E9A665467FE7, xmp.iid:1C1D38FCBC45E011B980E9A665467FE7, xmp.iid:006755A5E045E0118EEF966673AF88C9, xmp.iid:917C19BEE045E0118EEF966673AF88C9, xmp.iid:927C19BEE045E0118EEF966673AF88C9, xmp.iid:1294032F9146E011A3EF99DA0D317BC6, xmp.iid:A12AF8349F46E011A3EF99DA0D317BC6, xmp.iid:A22AF8349F46E011A3EF99DA0D317BC6, xmp.iid:671102FBB849E011B87FDF8C70FD92BF, xmp.iid:B4E25C20864AE011A5F39DF203EFC058, xmp.iid:34868AEA234BE0118635A5BDD532EE48, xmp.iid:66B9E1CC254BE0118635A5BDD532EE48, xmp.iid:67B9E1CC254BE0118635A5BDD532EE48, xmp.iid:FD3E61D12A4BE0118635A5BDD532EE48, xmp.iid:7608EC532C4BE0118635A5BDD532EE48, xmp.iid:D239B135334BE0118635A5BDD532EE48, xmp.iid:8F8B04E9334BE0118635A5BDD532EE48, xmp.iid:8741179C394BE0118635A5BDD532EE48, xmp.iid:8FC059283B4BE0118635A5BDD532EE48, xmp.iid:5B7D29993E4BE0118635A5BDD532EE48, xmp.iid:39A208450E4CE011B5DA8AA06E9B2CD0, xmp.iid:B157F8520E4CE011B5DA8AA06E9B2CD0, xmp.iid:B257F8520E4CE011B5DA8AA06E9B2CD0, xmp.iid:4590A445134CE0119DDD81935AF9EE58, xmp.iid:4690A445134CE0119DDD81935AF9EE58, xmp.iid:1705A9B6144CE0119DDD81935AF9EE58, xmp.iid:0F7D4439154CE0119DDD81935AF9EE58, xmp.iid:E7566AB4154CE0119DDD81935AF9EE58, xmp.iid:911951142C4FE011936EC1375A645042, xmp.iid:97F5ADAB2C4FE011936EC1375A645042, xmp.iid:812287FA2C4FE011936EC1375A645042, xmp.iid:0DA228FF2D4FE011936EC1375A645042, xmp.iid:30723A192E4FE011936EC1375A645042, xmp.iid:C6B62AC32E4FE011936EC1375A645042, xmp.iid:5B32E6532F4FE011936EC1375A645042, xmp.iid:19CF8CCC2F4FE011936EC1375A645042, xmp.iid:1DA7CF35304FE011936EC1375A645042, xmp.iid:B7F1805FB650E0118F51B06B9B48FE06 History When : 2010:03:31 09:04:55-04:00, 2010:03:31 09:04:56-04:00, 2010:06:16 11:38:37-04:00, 2010:06:16 11:45:31-04:00, 2010:06:16 16:19:08-04:00, 2010:06:16 16:55:52-04:00, 2010:06:23 13:41:43-04:00, 2010:06:23 14:10:24-04:00, 2010:06:23 16:57:44-04:00, 2010:06:28 15:48:43-04:00, 2010:06:29 09:55:20-04:00, 2010:07:01 14:01:52-04:00, 2010:07:01 15:33:47-04:00, 2010:07:01 15:56:40-04:00, 2010:07:26 14:40:48-04:00, 2010:08:04 15:55:42-04:00, 2010:08:04 16:33:50-04:00, 2010:08:04 16:59:06-04:00, 2010:08:05 17:02:21-04:00, 2010:08:06 11:23:08-04:00, 2010:08:09 16:11:15-04:00, 2010:08:10 17:00:36-04:00, 2010:08:12 16:55:53-04:00, 2010:08:13 17:12:13-04:00, 2010:08:27 17:16:21-04:00, 2010:08:27 17:19:30-04:00, 2010:08:30 14:58:30-04:00, 2010:09:01 16:15:09-04:00, 2010:09:01 16:40:30-04:00, 2010:09:07 12:01:39-04:00, 2010:09:08 16:58:42-04:00, 2010:09:09 11:54:11-04:00, 2010:09:13 14:17:56-04:00, 2010:09:13 16:18:10-04:00, 2010:09:20 13:45:37-04:00, 2010:09:20 19:16:15-04:00, 2010:10:15 16:55:06-04:00, 2010:10:15 16:55:06-04:00, 2010:10:29 15:23:42-04:00, 2010:10:29 16:31:10-04:00, 2010:11:08 17:32:26-05:00, 2010:11:09 10:53:12-05:00, 2010:11:10 16:51:16-05:00, 2010:11:11 13:00:36-05:00, 2010:11:12 16:47:41-05:00, 2010:11:15 19:36:44-05:00, 2010:11:16 11:54:40-05:00, 2010:11:17 15:05:14-05:00, 2010:11:22 15:33:55-05:00, 2010:11:22 18:19:49-05:00, 2010:11:23 16:37:46-05:00, 2010:11:24 11:23:56-05:00, 2010:11:24 12:00:54-05:00, 2010:11:30 11:59:26-05:00, 2010:11:30 17:28:15-05:00, 2010:12:01 15:38:25-05:00, 2010:12:01 17:03:16-05:00, 2010:12:02 11:11:57-05:00, 2011:01:11 16:56:38-05:00, 2011:01:12 09:42:31-05:00, 2011:01:12 09:51:31-05:00, 2011:01:19 17:02:18-05:00, 2011:01:19 17:07:33-05:00, 2011:01:20 14:29:45-05:00, 2011:01:24 17:00:17-05:00, 2011:01:25 16:52:48-05:00, 2011:01:25 16:52:48-05:00, 2011:01:26 11:48:02-05:00, 2011:01:26 12:51:15-05:00, 2011:01:26 14:42:40-05:00, 2011:01:27 13:32:13-05:00, 2011:01:27 13:37:26-05:00, 2011:01:31 11:55:32-05:00, 2011:01:31 14:49:42-05:00, 2011:01:31 16:01:09-05:00, 2011:02:01 16:59:03-05:00, 2011:02:02 15:52:17-05:00, 2011:02:03 15:38:12-05:00, 2011:02:03 15:40:50-05:00, 2011:02:14 14:38:38-05:00, 2011:02:14 16:45:23-05:00, 2011:02:15 14:01:48-05:00, 2011:02:15 16:30:24-05:00, 2011:02:17 16:02:23-05:00, 2011:02:18 17:11:10-05:00, 2011:03:02 16:19:33-05:00, 2011:03:02 16:32:24-05:00, 2011:03:02 16:32:59-05:00, 2011:03:02 16:32:59-05:00, 2011:03:03 11:28-05:00, 2011:03:03 11:44:18-05:00, 2011:03:03 11:49:24-05:00, 2011:03:03 11:50:37-05:00, 2011:03:03 11:52:37-05:00, 2011:03:03 11:54:25-05:00, 2011:03:03 11:56:07-05:00, 2011:03:03 11:59:37-05:00, 2011:03:03 12:01:21-05:00, 2011:03:03 12:13:08-05:00, 2011:03:03 12:14:12-05:00, 2011:03:03 12:16:17-05:00, 2011:03:03 12:17:21-05:00, 2011:03:03 12:17:59-05:00, 2011:03:03 12:19:45-05:00, 2011:03:03 12:21:26-05:00, 2011:03:03 12:22:27-05:00, 2011:03:03 12:23:31-05:00, 2011:03:03 12:24:53-05:00, 2011:03:03 12:25:46-05:00, 2011:03:03 12:26:59-05:00, 2011:03:03 12:27:49-05:00, 2011:03:03 12:28:45-05:00, 2011:03:03 12:31:03-05:00, 2011:03:03 12:31:54-05:00, 2011:03:03 12:33:32-05:00, 2011:03:03 12:34:27-05:00, 2011:03:03 12:36:52-05:00, 2011:03:03 12:38:01-05:00, 2011:03:03 16:53:17-05:00, 2011:03:03 16:53:58-05:00, 2011:03:03 16:53:58-05:00, 2011:03:04 13:56:59-05:00, 2011:03:04 15:37:22-05:00, 2011:03:04 15:37:22-05:00, 2011:03:08 14:19:25-05:00, 2011:03:09 14:47:55-05:00, 2011:03:10 09:37:25-05:00, 2011:03:10 09:50:54-05:00, 2011:03:10 09:52-05:00, 2011:03:10 10:26:49-05:00, 2011:03:10 10:37:38-05:00, 2011:03:10 11:26:54-05:00, 2011:03:10 11:31:54-05:00, 2011:03:10 12:12:42-05:00, 2011:03:10 12:23:47-05:00, 2011:03:10 12:48:25-05:00, 2011:03:11 13:34:59-05:00, 2011:03:11 13:35:22-05:00, 2011:03:11 13:35:22-05:00, 2011:03:11 14:10:47-05:00, 2011:03:11 14:12:54-05:00, 2011:03:11 14:21:06-05:00, 2011:03:11 14:24:46-05:00, 2011:03:11 14:28:12-05:00, 2011:03:15 13:45:55-04:00, 2011:03:15 13:50:09-04:00, 2011:03:15 13:52:22-04:00, 2011:03:15 13:59:39-04:00, 2011:03:15 14:00:23-04:00, 2011:03:15 14:05:08-04:00, 2011:03:15 14:09:11-04:00, 2011:03:15 14:12:33-04:00, 2011:03:15 14:15:30-04:00, 2011:03:17 12:48:23-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2011:03:17 15:43:49-04:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 3451 bytes, use -b option to extract), (Binary data 14172 bytes, use -b option to extract) Format : application/pdf Title : 2011 TPI Corporation Electrical Fan & Light Products Creator : TPI Corporation -- Robert Aaron Cox Date Created : 2005:08:15 Marked : True Doc Change Count : 35165 Producer : Adobe PDF Library 9.9 Trapped : Unknown Keywords : Startup Profile : Print Creator Address : P.O. Box 4973 Creator City : Johnson City Creator Region : Tennessee Creator Postal Code : 37602 Creator Country : United States Creator Work Telephone : 423-477-4131 x248 Creator Work Email : acox@tpicorp.com Creator Work URL : http://www.tpicorp.com Page Count : 58 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools