PRDGD ACCULITE USA 3/27/02 2 Brochure

: Pdf 439937-Brochure 439937-Brochure 661209 Batch4 unilog

Open the PDF directly: View PDF .
Page Count: 116

Download
Open PDF In Browser	View PDF

C O M M E R C I A L

Highbay
Lowbay
Commercial and retail
Parking and canopy
Area lighting
Security lighting
Floodlighting
Specialty

A N D

I N D U S T R I A L

L I G H T I N G

AccuLite Advantage
AccuLite’s revolutionary new low and medium wattage
electronic H.I.D. luminaires offer many advantages over
traditional magnetic ballast luminaires. Electronic H.I.D.
luminaires from AccuLite reduce energy consumption,
operating and maintenance costs. AccuLite’s electronic
H.I.D. luminaires achieve higher light levels with fewer
luminaires because of the improved lumen maintenance of
the lamp. Lighting designers can specify lower wattage
lamps, yet easily reach the required minimum light levels at
the end of lamp life.
Best of all, when combining electronic H.I.D. technology with
superior AccuLite luminaire optics, even greater savings are
achieved.

HIGHBAY

The AccuLi t e

LOWBAY

FOR GENERAL INDOOR DOWNLIGHTING
INDUSTRIAL, COMMERCIAL, RETAIL, RECREATION
HIGHBAY

LOWBAY

FOR GENERAL INDOOR DOWNLIGHTING OF INDUSTRIAL,
COMMERCIAL, RETAIL, RECREATION AND SPORTS FACILITIES

FOR GENERAL INDOOR DOWNLIGHTING OF INDUSTRIAL,
COMMERCIAL, RETAIL, RECREATION

COMMERCIAL & RETAIL

DURALYTE™

ACCUGLASS™

ACCULUME™

10

9

12

11

ACCUGLO™

12

VERTIBAY™

ACCUGLO™

21-22

24

23

DL

ACG

HB1

HB3 & HB4

HB5

AG & MAG

EGA & MEGA

HB3

HI-LUX™

TEMPORARY

MERCHANDISER™

PRISMA-LUX™

ACCESSORIES

LO-LUX™

VERTI-LUX™

ACCESSORIES

NEW

PARKING & CANOPY

ECONOBAY™

ECONOBAY™

14

13

ALX

ALX

™

15

16

ALX

27-29

26

AF / HI-LO / DRB

ALX

COMMERCIAL & RETAIL

PARKING GARAGE & CANOPY

COUNTY COLLECTION

FOR INDOOR AND OUTDOOR LOCATIONS:
PARKING GARAGES, OUTDOOR CANOPIES,
STAIRWELLS AND INDOOR LOW CEILINGS

™

CARLETON

EXETER

BALLASTS

BALLASTS

NEW

SECURITY

25

17-19

AF / HI-LO / DRB

ALX

ALX

™

SIMCOE

NEW

NEW

ORION™

TITAN™

NITELYTE™ II

NEW
33

37-39

34-36

E1 / E2

C

SO

42-43

40-41

RFB

RBR
60

59

ELECTRONIC H.I.D. LOW AND MEDIUM WATTAGE FOR GENERAL INDOOR DOWNLIGHTING OF
COMMERCIAL, RETAIL, INDUSTRIAL, RECREATION AND SPORTS FACILITIES

AREA

DURALYTE™

NEW

ACCUGLASS™

ACCULUME™

ECONOBAY™

ACCUGLO™

NEW

NEW

NEW

NEW

45

ECG / OR

EDL / OR

FLOODLIGHTING

46-47

48-49

EHB / OR

EHB / OR

RECESSED LIGHTING
™

PARALUME™

DURALUME

PARALUME™
36-37

SPECIALTY
4

57

56

55

DLR

RL

RL

50-51

52-53

EAG / OR

61

OR

NL

CPL

ACCUSQUARE™

ACCUSQUARE™

ACCUPARK™

63

MCL

62

63

CL

MPG

HIGHBAY

Advant age
O U T D O O R S E C U R I T Y, A R E A A N D F L O O D L I G H T I N G
I N D O O R / O U T D O O R S P E C I A LT Y P R O D U C T S
FLOODLIGHTING

SECURITY LIGHTING

ACCUPAK™

ACCUPAK™

FLOODLIGHTING OF BUILDING FACADES,
SIGNAGE AND LARGE AREAS

DARK SKY

ACCUPAK™

LOWBAY

FOR OUTDOOR WALL MOUNTING

CARIBE™

ACCUFLOOD™

ACCUFLOOD™™

NEW

WLS

MWP
POLARIS™

WP / WMLM / WLL

POLARIS™

FLS

EFM

ACCUFLOOD™

ACCUFLOOD™

ACCUFLOOD™™

SFL
DUSK TO
TO DAWN
DAWN
DUSK
WALL-LUX™

SECUR-LUX™

TWI-LITER

97

96

AL

DT

PARKING & CANOPY

72

71

DR (UP/DOWN)

DR

95

94

RBF

NEW

70

70

93

DW
ARCHITECTURAL

POLARIS™

NEW

NEW

69

67-68

66

COMMERCIAL & RETAIL

65

98

FLM

NF

ACCUFLOOD

™

FLOOD-LUX

™

QUARTZ-LUX™

™

NEW

99
74

75

JJ

EWM

FLC

TW

100

101

Q

CF
™

POLES

™

SPORT-PRO

SECURITY

73

SPORT-PRO

AREA LIGHTING
FOR PARKING LOTS, ROADWAYS, LARGE OUTDOOR AREA
AND DECORATIVE WALKWAYS
ARIES™

ARIES™

NEW

ARIES™

ARIES™

103

SP - REMOTE

88-90

SSS, RTS, STS

AREA

SP - INTEGRAL

103

SPECIALTY LIGHTING
FLUORESCENT INDOOR & OUTDOOR APPLICATIONS
77

79

78

80-81

AVS

AVP

BRACKETS

QUASAR™

ABERDEEN™

ABERDEEN™

ABERDEEN™

SIGNLUME™

WEATHERPROOF

107
85

84

82-83

HIGH ABUSE

108

FLOODLIGHTING

AVR

109

SLC & SLS

FSL

EWF & WP

INDOOR / OUTDOOR

MINE LIGHTING

VAPOURLUME

MINELITER

85

CSB / FT

ASA1

ASA2

ASA3

MAIN STREET™

POLES

POLES

PARKLUME™

NEW
87

86

ASM1

AP

105
88-90

SSS, RTS, STS

111

91

RTH/RD/RDP/ULG

VC / VP / VW

SPECIALTY

NEW

ML
5

HIGHBAY

The Luminaire Makes the Difference

LOWBAY

AccuLite Electronic H.I.D. Delivers Improved Lumen Maintenance

The Ultimate Lighting System
Extraordinary lighting systems such as AccuLite’s Duralyte™ and Accuglo™ are engineered to put up to

COMMERCIAL & RETAIL

20%* more light on the seeing task. Specify AccuLite lighting systems today.

Increase Maintained Lumen Output

PARKING & CANOPY

Electronic ballasts and pulse start metal halide lamps can increase lumen output from 30% to
more than 50% compared to probe start metal halide lighting systems.

High Performance Lamps

SECURITY

by up to 50%. A 12,000 hour useful lamp life will increase to 18,000 hours useful average

AREA

Dramatic savings accrue when the lamp life of a pulse start metal halide lamp in increased

The AccuLite Advantage – AccuLite Performance Luminaires

life. Relamping a 12 hour/day operation goes from 32 months to 49 months.

Independent photometric testing demonstrates the true ability of a luminaire to perform as
advertised. Duralyte ™ and Accuglo ™ luminaires have been shown to reduce the number of
FLOODLIGHTING

fixtures in an installation. When compared to ordinary fixtures, lighting installations

fea-

turing high performance AccuLite luminaires with electronic ballast allows you to install
fewer luminaires, often with lower wattages .
As electricity rates rise, this outstanding performance and the lower wattage option will

SPECIALTY

become even more valuable.

6

HIGHBAY

AccuLite’s Breakthrough Electronic Technology
AccuLite’s revolutionary new low and medium wattage electronic H.I.D. luminaires offer advantages over traditional
magnetically ballasted luminaires. With improved lumen maintenance, electronically ballasted luminaires can be
specified with lower wattage lamps, yet easily reach the required minimum light levels at the end of lamp life.
Electronic H.I.D. can achieve higher light levels with fewer luminaires than luminaires using magnetic ballast
technology.

LOWBAY

Electronic ballast technology extends average lamp life, thereby reducing maintenance. Best of all, electronic H.I.D.
from AccuLite reduces energy consumption and operating costs.

Electronic H.I.D. Delivers Improved Lumen Maintenance

COMMERCIAL & RETAIL

With most medium wattage (250W - 400W) metal halide
lamps, the published average lamp life is 20,000 hours.
“Mean” light output is defined as 40% of rated life, or 8,000
hours for a 20,000 hour lamp.
The chart compares standard probe start (magnetically
ballasted), pulse start (magnetically ballasted) and pulse start
(electronically ballasted) metal halide lamps. To design for the
same mean light levels requires 25% more probe start and 13%
more pulse start (magnetic ballast) than pulse start luminaires
with an electronic ballast.

PARKING & CANOPY

Architects generally consider end of life light levels* (i.e. they
design to mean lumens, not initial lumens) in their designs. As
can be seen from the chart, an electronic system can be
designed for lower initial levels yet still have more light at end
of life.
* End of life Probe start @ 12,000 hours, pulse start @ 18,000 hours)

30 – 50% lumen maintenance improvement = Up to 50% less lamp maintenance
SECURITY

1
2
3
4
5

Improved
Lumen
Maintenance

Good lighting systems are designed based on the mean (“average”) light output. Mean
is defined as the output at 40% of the lamps rated life (i.e.: 20,000 hour rated lamp 40% of 20,000 = 8000 hours). For most medium wattage lamps operating with
magnetic ballasts, relamping occurs at 12,000 hours. With electronic ballasts,
AccuLite’s lumen depreciation curve flattens out extending relamping to 18,000 hours.

56% more maintained lumens = Up to 36% fewer fixtures
With an improvement of up to 56% more mean lumens (compared to conventional
probe start MH lighting) the overall fixture count can be reduced by up to 36% while
maintaining similar light levels. Fewer fixtures can have a dramatic impact on
installation, maintenance and operating costs.
AREA

More
Lumens
Maintained

20% higher luminaire performance = Even fewer fixtures
While benefits can be obtained using any lighting fixture, AccuLite offers luminaires
with high performance optics. Performance tested by independent laboratories,
AccuLite’s Duralyte and Accuglo allow installation of up to 20% fewer fixtures in an
installation. One to one lighting upgrades can use lower lamp wattages for added
benefits.

FLOODLIGHTING

High
Performance
Luminaires

Fewer fixtures = Increases energy savings

Fewer Luminaires
and
Lower Wattage

Reducing energy consumption can be achieved by lowering the fixture wattage and
reducing the the number of luminaires. The chart on the next page illustrates how a
high performance luminaire, the AccuLite Duralyte, achieves the desired savings.

Improved Lumens per Square Foot
SPECIALTY

Out performs
T5HO Fluorescent

Comparing watts/square foot§, AccuLite’s high performance Duralyte at 1.0W/sq.ft
is the clear winner over both spun aluminum highbays (1.8W/sq/ft.) and T5HO
fluorescents (1.3 to 1.4W/sq.ft.).
§ Actual comparison - 300’ X 300’ building lit to 75fc.
- T5HO results vary depending on ambient temperature.

7

HIGHBAY

Highbays

General Indoor Downlighting of Industrial, Commercial,
LOWBAY

Retail, Recreation and Sports Facilities with Ceiling Heights over 16 Feet
Accessories: Hi/Lo Switching, Remote Ballasts and Accuflex Modular Wiring System
Best Product

COMMERCIAL & RETAIL

High performance optics reduces number of fixtures required, lowering installation and operating cost
Heavy duty, finned/compartmentalized die-cast aluminum ballast housing
maximizes ballast life and results in exceptionally quiet operation

PARKING & CANOPY

Lamp wattages up to 1000 watts
Duralyte

Accuglass

Acculume

High

High Performance,

Lightweight

Performance,

Precision Molded

Molded

Low Brightness

Borosilicate Glass

Acrylic

Fully Faceted

Reflector

Reflector

Reflector

SECURITY

• Up

to 20% more efficient vs.

• Reflector

will last indefinitely...

standard spun reflectors

not affected by UV

• Low

• Uplight

glare maximizes visual

• Lightweight

reflector for simplified

installation

illuminates ceiling to

• Uplight

illuminates ceiling to

comfort/acuity

eliminate “cavern” effect

eliminate “cavern” effect

• 17”

• 16”

• 12”,

and 22” fully faceted reflectors

and 22” glass reflectors

16”, 22” and 25” reflectors

Better Product
Die-cast ballast housing

AREA

Diffuse spun aluminum reflector for industry standard photometric performance
EconoBay

Gemini

• 15”

•

18” and 22” Aluminum Reflectors

•

175W-1000W MH

and 16” Aluminum Reflectors

• 175W-450W

MH

FLOODLIGHTING

250W-400W HPS

150W-1000W HPS

Good Product

SPECIALTY

Economy grade with sheet metal ballast housing

8

Hi-Lux

Prisma-Lux

Merchandiser

15”, 16” and 18”

16”, 22” and 25”

16” and 22”

Aluminum

Prismatic Acrylic

Prismatic Glass

Reflectors

Reflectors

Reflectors

Max. 1000W

Max. 1000W

Max. 1000W

Duralyte™

High Performance Highbay
HIGHBAY

Lamp
Watts

Lamp
Base

Reflector
(Diameter)

3/4” Pendant Mount
Standard Profile

Mogul
”
”
Mogul

17”
”
”
22”

DL175MH-volts-17*
DL250MH-volts-17*
DL400MH-volts-17
HB5-1000MH-volts-22

17”
”
”
”
”
”
”
22”
”

DL175MH-volts-PSB-17‡
DL200MH-volts-PSB-17*
DL250MH-volts-PSB-17*
DL320MH-volts-PSB-17*
DL350MH-volts-PSB-17*
DL400MH-volts-PSB-17
DL450MH-volts-PSB-17
HB5-875MH-volts-PSB-22
HB5-1000MH-volts-PSB-22

17”
”
”
22”

DL150HP-volts-17
DL250HP-volts-17
DL400HP-volts-17
HB5-1000HP-volts-22

Metal Halide

DL

HB5

Max 450W

For 1000W

LOWBAY

175
250
400
1000

Pulse Start Metal Halide

DL

Low Profile

Enclosed Optical Assembly

DL
High Performance Luminaire
with Fully Faceted Optical Assembly

Mogul
”
”
”
”
”
”
Mogul
“

COMMERCIAL & RETAIL

LPDL

175
200
250
320
350
400
450
875
1000

High Pressure Sodium

•Field adjustable eleven position reflector for better light
control.
Cool Operating
•Heavy duty die cast aluminum ballast housing.

Mogul
”
”
Mogul

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

PARKING & CANOPY

150
250
400
1000

High Performance Fully Faceted Optics
•Fully faceted aluminum reflector ensures highest
luminaire performance allowing fewer fixtures per
installation vs. spun aluminum.

* Must use a bottom closure or a protected lamp (See “Options - Lamp”)
‡ Must use bottom closure, protected lamp not available

Finish
•White polyester powder coat finish.

Options

•Heat resistant hinged glass lens, three stainless steel lens
clips and silicone rubber gaskets.
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

450 Watt 17-1/8”
450 Watt 22-5/8”
1000Watt 22-5/8”

H (min)

D

17-1/8”
22-5/8”
22-5/8”
D

D

H

3/4” Hub

27-1/8”
26-7/8”
26-3/4”

H (Min) H (Max)

450 Watt 17-1/8” 17-1/4” 19-3/4”
450 Watt 22-5/8” 17-1/2” 19-1/2”

H

L

26-5/16”
29-1/16

H
D

- CL
-L

Ballast
Luminaires with magnetic ballast – see above
Luminaires with electronic ballast – see page 45
Bottom Closure

- BC

Lampholder For Protected Lamp
(Order Lamp Separately)

-PLS

- POT

Male HK75SS
Female HF75SS

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)

Q-DECK

Ballast Safety Chain - 3’ long ∆

DL-BSC3

Optical Assembly Safety Cable

DL-RSC

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

-Q

Wire Guard
For 17” reflector
For 22” reflector

Protected Igniter HPS Only

- PI

Top Shroud

DL-17WG
DL-22WG
DL-SS

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Power Hook
Receptacle, hook and box

HBPH-volts

HI/LO Systems Bi-Level switching

See page 17

Remote Optical Assembly
Replace the Voltage with

- RB

Accuflex Modular Wiring

See page 18

Reflector Substitution
Change reflector from 17”dia to 22” dia
Replace -17 with

- 22

Enclosed Optical Assembly
Fully gasketed optical assembly

-EOA

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Low Profile Luminaires
Change DL to LPDL (450W Max)

3/4” Hub

L
H
D

Safety Hook - 3/4”NPT

Catalog No.

SPECIALTY

Low Profile

3/4” Hub

23-5/16” 25-13/16”
23-9/16” 26-1/16”
23”
25-1/2”

Enclosed Optical Assembly

450 Watt
450 Watt
1000Watt

H (Max)

Description

FLOODLIGHTING

D

Lamp
Items marked ”*“ or “‡” – See note above
Coated Lamp (Recommended for MH)
Clear Lamp

Potted Ballasts For low noise requirements
Not available with HB5 and LPDL models

Dimensions
Standard

Accessories
Suffix

AREA

Socket
•Specification grade porcelain lampholder.

Description

SECURITY

Enclosed Optical Assembly
•Prevents dirt from accumulating on reflector.

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP
9

Prismatic Glass Highbay Reflector

HIGHBAY

Accuglass™

Lamp
Watts

Lamp
Base

Reflector
(Diameter)

3/4” Pendant Mount
Standard Profile *

Mogul
”
”
Mogul
”
”
”

16”
”
”
22”
”
”
”

ACG175MH-volts-A*
ACG250MH-volts-A*
ACG400MH-volts-A
ACG175MH-volts-C*
ACG250MH-volts-C*
ACG400MH-volts-C
ACG1000MH-volts-C ∆

16”
”
”
”
”
”
”
22”
”
”
”
”
”
”
”
”

ACG175MH-volts-PSB-A‡
ACG200MH-volts-PSB-A*
ACG250MH-volts-PSB-A*
ACG320MH-volts-PSB-A*
ACG350MH-volts-PSB-A*
ACG400MH-volts-PSB-A
ACG450MH-volts-PSB-A
ACG175MH-volts-PSB-C‡
ACG200MH-volts-PSB-C*
ACG250MH-volts-PSB-C*
ACG320MH-volts-PSB-C*
ACG350MH-volts-PSB-C*
ACG400MH-volts-PSB-C
ACG450MH-volts-PSB-C
ACG875MH-volts-PSB-C
ACG1000MH-volts-PSB-C ∆

16”
”
”
22”
”
”
”

ACG150HP-volts-A
ACG250HP-volts-A
ACG400HP-volts-A
ACG150HP-volts-C
ACG250HP-volts-C
ACG400HP-volts-C
ACG1000HP-volts-C∆

Metal Halide

ACG

16” Reflector - 450W

22” Reflector - 450W

LOWBAY

ACG

175
250
400
175
250
400
1000

COMMERCIAL & RETAIL

Pulse Start Metal Halide

LPACG

ACG

Low Profile

22” Reflector - 1000W

ACG
Industrial and Commercial
Highbay Lighting

PARKING & CANOPY

Glass Reflector
•Borosilicate glass reflector with three heavy duty rods
and locking device secure the reflector.
•Available with 16” and 22” reflectors.
Uplight Component
•Clear glass, open topped reflector eliminates cavern
effect.
Cool Operating
•Heavy duty die cast aluminum ballast housing.

SECURITY

Finish
•White polyester powder coat finish.
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.
Socket
•Specification grade porcelain lampholder.

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Mogul
”
”
”
”
”
”
Mogul
”
”
”
”
”
”
”
”

High Pressure Sodium
150
250
400
150
250
400
1000

Mogul
”
”
Mogul
”
”
”

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Accessories

400 Watt

15-3/4”

25”

Ballast
Luminaires with magnetic ballast – see above
Luminaires with electronic ballast – see page 47

450 Watt

21-1/2”

23-3/4”

1000 Watt

21-1/2”

26-3/4”

3/4” Hub

H

Description

Suffix

Dimensions
H

* Must use a bottom closure or a protected lamp (See “Options - Lamp”)
‡ Must use bottom closure, protected lamp not available
∆ Uses HB5 housing illustrated 1000W Duralyte (see page 9)

Options
Description

Lamp
Items marked ”*“ or “‡” – See note above
Coated Lamp (Recommended for MH)
Clear Lamp

D

FLOODLIGHTING

175
200
250
320
350
400
450
175
200
250
320
350
400
450
875
1000

Safety Hook - 3/4”NPT
- CL
-L

Bottom Closure

- BC

Lamp holder For Protected Lamp
(Order Lamp Separately)

-PLS

Potted Ballasts For low noise requirements
Not available with 750W, 1000W or LPACG models

D
Low Profile D

H

450 Watt 15-3/4” 19-1/4”

SPECIALTY

450 Watt 21-1/2” 18”

L

3/4” Hub

25-1/2”

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included
Protected Igniter for HPS Luminaires

L

-Q
- PI

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

28-1/4”
H

Remote Optical Assembly
D
10

- POT

Male HK75SS
Female HF75SS

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)
Ballast Safety Chain 3’ long ∆

ACG-BSC3

Optical Assembly Safety Cable

ACG-RSC

Wire Guard
For 17” reflector
For 23” reflector
Top Shroud
Power Hook
Receptacle, hook and box

Q-DECK

ACG-A-WG
ACG-C-WG
ACG-SS
HBPH-volts

HI/LO Systems Bi-Level Switching

See page 17

Accuflex Modular Wiring

See page 18

- RB
∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Low Profile Luminaires
Change ACG to LPACG (450W Max)
Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Catalog No.

- LSP

Acculume™

Prismatic Acr ylic Highbay Reflector
HIGHBAY

Lamp
Watts

Lamp
Base

Refractor
(Diameter)

3/4” Pendant Mount
Standard Profile

Medium
Mogul
”
”
Mogul
Mogul

12”
16”
”
”
22”
25”

HB1-175MH-volts-PR12 †
HB1-175MH-volts-PR16 *
HB1-250MH-volts-PR16 *
HB1-400MH-volts-PR16 ∆
HB1-400MH-volts-PR22
HB5-1000MH-volts-PR25 ∆

12”
”
”
”
16”
”
”
”
”
”
”
22”
”
”
25”

HB1-50MH-120-PR12 *§
HB1-70MH-volts-PR12 *
HB1-100MH-volts-PR12 *
HB1-150MH-volts-PSB-PR12 Ơ
HB1-150MH-volts-PSB-PR16 Ơ
HB1-175MH-volts-PSB-PR16 ‡
HB1-200MH-volts-PSB-PR16 *
HB1-250MH-volts-PSB-PR16 *
HB1-320MH-volts-PSB-PR16 Ơ
HB1-350MH-volts-PSB-PR16 Ơ
HB1-400MH-volts-PSB-PR16 ∆
HB1-400MH-volts-PSB-PR22
HB1-450MH-volts-PSB-PR22 ∆
HB5-875MH-volts-PSB-PR22 ∆
HB5-1000MH-volts-PSB-PR25 ∆

12”
”
”
”
”
16”
”
”
22”
25”

HB1-35HP-120-PR12§
HB1-50HP-120-PR12§
HB1-70HP-volts-PR12
HB1-100HP-volts-PR12
HB1-150HP-volts-PR12∆
HB1-150HP-volts-PR16
HB1-250HP-volts-PR16
HB1-400HP-volts-PR16∆
HB1-400HP-volts-PR22
HB5-1000HP-volts-PR25∆

Metal Halide

HB1

HB1

16” Reflector

16” Reflector

LOWBAY

175
175
250
400
400
1000

Pulse Start Metal Halide

Low Profile

HB1
Industrial and Commercial
Highbay Lighting

Decorative Accessories
•Available in designer colors with decorative rings and bands.
Cool Operating
•Heavy duty die cast aluminum ballast housing.
Finish
•White polyester powder coat finish.

Socket
•Specification grade porcelain lampholder.
Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

—
—

—
—

❶
✔
❶
✔

—
—

Open Bottom
Closed Bottom

—
—

—
—

—
—

✔
✘
✔
✔
✔
✔

Open Bottom
Closed Bottom

16”

Open Bottom
Closed Bottom

22”
25”

—
—

✘ NOT
available

✔
✘

12” Reflector
16” Reflector
22” Reflector
25” Reflector

H

12”
17”
16”
21-7/8”
22-3/8” 23-7/8”
25”
28-7/8”

H

Options
Description

16” 16-7/8” 25-1/2”
22-3/8” 18-7/8” 28-1/4”

Description

Suffix

Lamp
Items marked ”*“, “†” or “‡” (See note above)
Coated Lamp (Recommended for MH)
- CL
Clear Lamp
-L
Ballast
Luminaires with magnetic ballast – see above
Luminaires with electronic ballast – see page 49
Lampholder For Protected Lamp
(Order Lamp Separately)

-PLS

Potted Ballasts For low noise requirements
Not available with HB5 and LPHB1 models

- POT
-Q

Protected Igniter HPS Only

H

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage
Decorative Rings

L

Accessories

3/4” Hub

- PI

Consult Factory

Low Profile Luminaires
Change HB1 to LPHB1 (450W Max)
Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

L
H

D

** For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.
◊ Cords with plug are available for 15A or 20A service.

- LSP

Catalog No.

Safety Hook - 3/4”NPT

Male HK75SS
Female HF75SS

Cord Set - 3’ long **
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug ◊ 3C-TLP-(volts)-(amps)
Q-Deck Plate For quick mounting
Q-DECK
(Mounting screws not included)
Ballast Safety Chain - 3’ long **
HB1-BSC3
Optical Assembly Safety Cable
HB1-RSC
Wire Guard
16” dia reflector PR-16WG
22” dia reflector PR-22WG
25” dia reflector PR-25WG
Top Shroud
HB1-SS
Bottom Closure
See Reflector Application Guide on Left for Max Watt
Dia. Domed Conical
Drop
Flat
Acrylic

Acrylic

Acrylic

Glass

12” PR-12DL PR-12CL
–
–
16”
–
PR-16CL PR-16DL PR-16BL
22”
–
PR-22CL PR-22DL PR-22BL
25”
–
PR-25CL
–
–
Power Hook Receptacle, hook and box HBPH-volts
HI/LO Systems Bi-Level switching

See page 17

Accuflex Modular Wiring

See page 18

SPECIALTY

16” Reflector
22” Reflector

D

* Must use a bottom closure (See “Reflector Application Guide” below for
maximum wattage) or a protected lamp (See “Options - Lamp”)
† Must use protected lampholder and protected lamp
‡ Must use bottom closure, protected lamp not available
∆ Not available with bottom closure

3/4” Hub

D

Low Profile

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V
§ 277V available – change “-120” to “- 277”

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

Dimensions
D

Medium
”
”
”
”
Mogul
”
”
Mogul
Mogul

FLOODLIGHTING

❶
✘
❶
✔
❶
✔

—
—

Open Bottom
Closed Bottom

❶
✔
❶
✔
✘
✘

12”

❶ Available
– requires
lampholder for
protected lamp
See Options
✔ Available with
indicated wattage

35
50
70
100
150
150
250
400
400
1000

AREA

Reflector Application Guide With Acrylic Parts (Ambient 25°C)
Dia.
Watts
100 175 250 400 1000

High Pressure Sodium

SECURITY

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

PARKING & CANOPY

Full Range of Lightweight High Grade Acrylic Reflectors
•Clear non-yellowing acrylic, open topped reflectors.
Available 12”, 16”, 22”, and 25” reflectors. Light weight
acrylic is ideal for locations where glass is too heavy.

Medium
”
”
”
Mogul
”
”
”
”
”
”
Mogul
”
”
Mogul

COMMERCIAL & RETAIL

LPHB1

50
70
100
150
150
175
200
250
320
350
400
400
450
875
1000

11

HIGHBAY

Econobay™

Highbay Luminaire
Lamp
Watts

Lamp
Base

Reflector
(Diameter)

3/4” Pendant Mount
Standard Profile

Mogul
“
“
“
“
“
“
“
“

15” Aluminum
”
16” Aluminum
”
”
18” Aluminum
”
”
”

Consult Factory∆
HB4-400MH-volts∆
HB3-175MH-volts*
HB3-250MH-volts*
HB3-400MH-volts
HB5-175MH-volts*
HB5-250MH-volts*
HB5-400MH-volts
HB5-1000MH-volts

15” Aluminum
”
”
16” Aluminum
”
”
”
”
”
”
18” Aluminum
”
”
”
”
”
”

Consult Factory∆
HB4-400MH-PSB-volts∆
HB4-450MH-volts-PSB∆
HB3-175MH-volts-PSB‡
HB3-200MH-volts-PSB*
HB3-250MH-volts-PSB*
HB3-320MH-volts-PSB*
HB3-350MH-volts-PSB*
HB3-400MH-volts-PSB
HB3-450MH-volts-PSB*
HB5-175MH-volts-PSB‡
HB5-200MH-volts-PSB*
HB5-250MH-volts-PSB*
HB5-320MH-volts-PSB*
HB5-350MH-volts-PSB*
HB5-400MH-volts-PSB
HB5-450MH-volts-PSB*

15” Aluminum
”
16” Aluminum
”
16” Aluminum
”
”

HB4-250HP-volts∆
HB4-400HP-volts∆
HB3-250HP-volts
HB3-400HP-volts
HB5-250HP-volts
HB5-400HP-volts
HB5-1000HP-volts

Metal Halide

HB3

14” Reflector

16” Reflector

LOWBAY

HB4

175 & 250
400
175
250
400
175
250
400
1000

Pulse Start Metal Halide
HB5

HB5

COMMERCIAL & RETAIL

18” Reflector
Enclosed Optical Assembly

22” Reflector (Max 1000W)

HB3 & HB4
Economical Cast Fixtures with 15” ,
16” 18’ and 22” Aluminum Reflectors

PARKING & CANOPY

Field Adjustable Beam Spread
•Four diffused aluminum reflectors are adjustable for
narrow, medium and wide beam spreads.
• 15”, 16”, 18” and 22” nominal reflectors are offered.
Cast Housing
•Economical die cast aluminum ballast, not sheet metal.
Natural finish.
Enclosed Optical Assembly
•Optional fully enclosed optical assembly is available for
16”, 18” and 22” reflectors.

SECURITY

•With heat resistant hinged glass lens, three stainless
steel lens clips and silicone rubber gaskets.
Easy Install Mounting
•Extra large junction box with slide top adapter.
Full Range of Accessories
• Econobay is available with most common accessories
including fusing, quartz auxiliary lights, hooks, lens
(16”, 18” and 22” reflectors only) and guards.

AREA

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.
Socket
• Specification grade porcelain lampholder.

FLOODLIGHTING

Ballasts
• HPF ballasts are suitable for low temperature
starting.MH-30°C, Pulse Start MH -40°C, HPS -40°C

Dimensions
Standard

SPECIALTY

HB3
HB4
HB5
HB5

Lamp

400W
400W
400W
1000W

D

Enclosed Optical Assembly

HB3
HB5
HB5

400W
400W
1000W

H (min)

16”
14-3/4””
18-7/16”
22-1/4”
D

16”
18-7/16”
22-1/4”

H (Max)

21-1/8”
19-3/4”
20-3/4”
23-3/4”
H

25-3/8”
24-7/8”
27-3/8”

3/4” Hub

23-1/8”
21-3/4”
22-3/4”
25-3/4”

D

H
D

12

Mogul
“
“
“
“
“
“
“
“
“
“
“
“
“
“
“
“

High Pressure Sodium
250
400
250
400
250
400
1000

Mogul
“
“
“
“
“
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

* Must use a bottom closure or protected lamp (See “Options — Lamp”)
‡ Must use bottom closure, protected lamp not available
∆ Bottom closure not available

Accessories

Options
Description

Description

Suffix

Lamp Items marked ”*“ or “‡” – See note above
Coated Lamp
- CL
Clear Lamp
-L

Catalog No.

Safety Hook - 3/4”NPT

Male HK75SSB
Female HF75SSB

Ballast
Luminaires with magnetic ballast – see above
Luminaires with electronic ballast – see page 51

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)

Bottom Closure
To order with bottom closure

Q-Deck Plate For quick mounting
(Mounting screws not included)

- See Accessories

Lampholder For Protected Lamp
(Order Lamp Separately)
Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included
Protected Igniter HPS Only

H

3/4” Hub

175 thru 350
400
450
175
200
250
320
350
400
450
175
200
250
320
350
400
450

-PLS

-Q

Enclosed Optical Assembly
Fully gasketed optical assembly with hinged lens
(Available with 16”, 18” and 22” reflectors )
Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies
∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Ballast Safety Chain - 3’ long ∆

HB3-BSC3

Optical Assembly Safety Cable

HB3-RSC

Wire Guard

For 15” reflector HB4-WG
For 16” reflector HB3-WG
For 18” reflector HB5-WG18
For 22” reflector HB5-WG22

Top Shroud

HB3-SS

- PI

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

-EOA

- LSP

Q-DECK

Bottom Closure
For 16” reflector
HB3-BL
Bottom closure for 15” For 18” reflector HB5-BL18
reflector is not available, For 22” reflector HB5-BL22
use HB3 model
Power Hook
Receptacle, hook and box
HI/LO Systems Bi-Level switching
Accuflex Modular Wiring

HBPH-volts
See page 17
See page 18

ALX™

NEW

Economy Highbay Luminaire

HIGHBAY

Lamp
Watts

750 - 1000W

Lamp
Base

Reflector
(Nom. Dia.)

Cat. No.
3/4” Pendant Mount

Mogul
“
“
Mogul
“
“
“

16” Aluminum
“
“
18” Aluminum
“
“
22“ Aluminum

ALX175MH-volts-16 *
ALX250MH-volts-16 *
ALX400MH-volts-16
ALX175MH-volts-18 *
ALX250MH-volts-18 *
ALX400MH-volts-18
ALX1000MH-volts-22 *

16” Aluminum
“
“
“
“
“
“
18” Aluminum
“
“
“
“
“
“
22“ Aluminum
“
“

ALX175MH-volts-PSB-16 ‡
ALX200MH-volts-PSB-16 *
ALX250MH-volts-PSB-16 *
ALX320MH-volts-PSB-16 *
ALX350MH-volts-PSB-16 *
ALX400MH-volts-PSB-16
ALX450MH-volts-PSB-16
ALX175MH-volts-PSB-18 ‡
ALX200MH-volts-PSB-18 *
ALX250MH-volts-PSB-18 *
ALX320MH-volts-PSB-18 *
ALX350MH-volts-PSB-18 *
ALX400MH-volts-PSB-18
ALX450MH-volts-PSB-18 *
ALX750MH-volts-PSB-22 *‡
ALX875MH-volts-PSB-22 *
ALX1000MH-volts-PSB-22*‡

16” Aluminum
“
“
18” Aluminum
“
“

ALX150HP-volts-16
ALX250HP-volts-16
ALX400HP-volts-16
ALX150HP-volts-18
ALX250HP-volts-18
ALX400HP-volts-18

Metal Halide

Hi-Lux

Hi-Lux

14” Reflector (Max 450W)

16” Reflector (Max 450W)

LOWBAY

175
250
400
175
250
400
1000

Pulse Start Metal Halide
Hi-Lux

Hi-Lux
22” Reflector (Max 1000W)

HI-LUX
Aluminum Highbay Reflectors

Enclosed Optical Assembly
•Optional fully enclosed optical assembly is available.
•With heat resistant hinged glass lens, three stainless
steel lens clips and silicone rubber gaskets.
Plumb Mounting
• The fixture is designed to hang plumb without extra
work for the contractor.

Finish
•White ballast housing
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

14-3/4”
16”
18-1/2”
22-1/4”

H (min)

20-1/4”
21-1/4”
20-1/2”
23-1/2”

Enclosed Optical Assembly
D

14-3/4”
16”
18-1/2”
22-1/4”

H (Max)

22-1/4”
23-1/4”
22-1/2”
25-1/2”

H

25-3/8”
26-3/8”
25-5/8”
28-1/8”

Accessories

Lamp
Items marked ”*“ or “‡”

3/4” Hub

Coated Lamp - CL
Clear Lamp - L

Bottom Closure
Factory pre-wired

- See Accessories
Cord only - C
Hook & cord - HC

D
3/4” Hub

H
D

- PLS

Quartz Auxiliary
Double contact bayonet base - Q
Quartz lamp not included
Protected Igniter For HPS Luminaires

H

Description

Suffix

- PI

Fuse Holder
Single fuse - F1
Supplied with fuse
Two fuses - F2
On multi-tap ballasts indicate line voltage
Enclosed Optical Assembly
Fully gasketed optical assembly with hinged lens
(Not available with 15” reflector)

-EOA

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Catalog No.

Safety Hook - 3/4”NPT

Male HK75SSB
Female HF75SSB

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
Q-DECK
(Mounting screws not included)
Ballast Safety Chain - 3’ long ∆
ALX-BSC3
Optical Assembly Safety Cable
ALX-RSC
Wire Guard

ALX-WG14
ALX-WG16
ALX-WG18
ALX-WG22
Top Shroud
ALX-SS
Bottom Closure
16” reflector ALX-BL16
18” reflector ALX-BL18
22” reflector ALX-BL22
Power Hook Receptacle, hook and box HBPH-volts
15” reflector
16” reflector
18” reflector
22” reflector

HI/LO Systems Bi-Level switching
Accuflex Modular Wiring

SPECIALTY

15
16
18
22

Options

FLOODLIGHTING

15
16
18
22

Voltage Suffix: change “volts” to –
* Must use a bottom closure or a protected lamp
“- QT” Quad Tap: 120V, 208V, 240V, 277V
‡ Protected lamp not available
“- TT” Tri Tap: 120V, 277V, 347V (150 to 450W ) ∆ Not available with bottom closure
“- 480” 480V (150 to 450W )
“- H2” 347V / 480V (750W to 1000W)

Lampholder For Protected Lamp
(Order Lamp Separately)

Dimensions
D

Mogul
“
“
Mogul
“
“

Description

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Standard

150
250
400
150
250
400

AREA

Socket
• Specification grade porcelain lampholder.

High Pressure Sodium

SECURITY

Full Range of Accessories
• Hi-lux™ is available with most common accessories
including fusing, quartz auxiliary lights, hooks, lenses
and guards.

PARKING & CANOPY

Aluminum Reflectors
•Three sizes of economical spun aluminum reflectors –
16”, 18” and 22”.

Mogul
“
“
“
“
“
“
Mogul
“
“
“
“
“
“
“
“
“

COMMERCIAL & RETAIL

18” Enclosed Optical Assembly
(Max 450W)

175
200
250
320
350
400
450
175
200
250
320
350
400
450
750
875
1000

See page 17
See page 18

13

Economy Highbay Luminaire

HIGHBAY

ALX™

Lamp
Watts

Lamp
Base

Reflector
(Nom. Dia.)

Cat. No.
3/4” Pendant Mount

Temporary Lighting - Metal Halide
400

Mogul

None - Guard only

LOWBAY

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

ALX400MH-volts-TL

* Must use a bottom closure or a protected lamp (See “Options - Lamp”)
‡ Must use bottom closure, protected lamp not available
∆ Not available with bottom closure

COMMERCIAL & RETAIL

Hi-Lux
Temporary Lighting

Options

Temporary Lighting
With Wire Guard

Lamp
Clear Lamp
-L
Lampholder For Protected Lamp
(Order Lamp Separately)
- PLS
Protected Igniter For HPS Luminaires
- PI
Fuse Holder
Single fuse - F1
Supplied with fuse
Two fuses - F2
On multi-tap ballasts indicate line voltage

PARKING & CANOPY

Plumb Mounting
• The fixture is designed to hang plumb without extra
work for the contractor.
Finish
•White ballast housing
Socket
• Specification grade porcelain lampholder.
Ballasts
• HPF ballasts are suitable for low temperature starting.

AREA

SECURITY

MH-30°C, Pulse Start MH -40°C, HPS -40°C

Dimensions
D

FLOODLIGHTING

Nom. Dia.
11”

H
16”

3/4” Hub

W

SPECIALTY

H

14

Accessories

Description

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Suffix

- LSP

Description

Safety Hook - 3/4”NPT

Catalog No.

Male HK75SSB
Female HF75SSB

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)
Ballast Safety Chain - 3’ long ∆

Q-DECK
ALX-BSC3

Power Hook Receptacle, hook and box HBPH-volts
∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

ALX™

NEW

Economy Highbay Luminaire

HIGHBAY

Lamp
Watts

750 - 1000W

Cat. No.
(No Hook / No Cord)
3/4” Pendant Mount

Lamp
Base

Reflector
(Nom. Dia.)

Mogul
“
“

16” Glass
“
“

ALX175MH-volts-A-PLS *
ALX250MH-volts-A-PLS *
ALX400MH-volts-A †

16” Glass
“
“
“
“
“
“

ALX175MH-volts-PSB-A-PLS
ALX200MH-volts-PSB-A-PLS
ALX250MH-volts-PSB-A-PLS
ALX320MH-volts-PSB-A-PLS
ALX350MH-volts-PSB-A-PLS
ALX400MH-volts-PSB-A-PLS
ALX450MH-volts-PSB-A-PLS

16” Glass
“
“

ALX150HP-volts-A
ALX250HP-volts-A
ALX400HP-volts-A

Metal Halide

LOWBAY

175
250
400

Pulse Start Metal Halide

Merchandiser
16” Reflector (Max 450W)

Merchandiser™
Glass Highbay Reflector

Mogul
“
“
“
“
“
“

‡

*
*
*
*

COMMERCIAL & RETAIL

175
200
250
320
350
400
450

†

*

High Pressure Sodium

Glass Reflectors
•With 16” Glass reflector

Full Range of Accessories
• Merchandiser™ is available with most common
accessories including fusing, quartz auxiliary lights,
hooks, lenses and guards.

Mogul
“
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

PARKING & CANOPY

Plumb Mounting
• The fixture is designed to hang plumb without extra
work for the contractor.

150
250
400

* Furnished with a lampholder for a protected lamp
‡ Protected lamp not available
† To order 400W metal halide and pulse start metal halide for use with a
protected lamp add suffix “-PLS”

Finish
•White ballast housing

•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.
Socket
• Specification grade porcelain lampholder.

H

3/4” Hub

Description

Suffix

Lamp
Items marked ”*“, “†” or “‡” (See note above)
Coated Lamp
- CL
Clear Lamp
-L
Factory pre-wired

Cord only - C
Hook & cord - HC

Lampholder For Protected Lamp
(Order Lamp Separately)

- PLS

Pulse Start Luminaires
High Performance Metal Halide

See above

H

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Safety Hook - 3/4”NPT

Male HK75SSB
Female HF75SSB

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)
Ballast Safety Chain - 3’ long **
Optical Assembly Safety Cable

-Q

Protected Igniter For HPS Luminaires
- PI
Fuse Holder
Single fuse - F1
Supplied with fuse
Two fuses - F2
On multi-tap ballasts indicate line voltage

22-3/4”
28-3/4”

Catalog No.

Power Hook
Receptacle, hook and box

Q-DECK
ALX-BSC3
ALX-RSC
HBPH-volts

HI/LO Systems Bi-Level switching

See page 17

Accuflex Modular Wiring

See page 18

FLOODLIGHTING

D

Description

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

Dimensions
Nom. Dia.
16
16”
22 22-3⁄8”

Accessories

AREA

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Options

SECURITY

New Technology Pulse Start
Metal Halide Lamps & Ballasts

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

- LSP

D
SPECIALTY
15

NEW

ALX™

Economy Highbay Luminaire

HIGHBAY

750 - 1000W

Lamp
Watts

Prisma-Lux

16” Reflector (Max 450W)

25” Reflector (Max 1000W)

LOWBAY

Prisma-Lux

Metal Halide
175
250
400
175
250
400
1000

Lamp
Base

Cat. No.
(No Hook / No Cord)
3/4” Pendant Mount

Reflector
(Nom. Dia.)

Mogul
“
“
Mogul
“
“
“

16” Acrylic
“
“
22” Acrylic
“
“
25” Acrylic

ALX175MH-volts-PR16 *
ALX250MH-volts-PR16 *
ALX400MH-volts-PR16
ALX175MH-volts-PR22 *
ALX250MH-volts-PR22 *
ALX400MH-volts-PR22
ALX1000MH-volts-PR25 ‡∆

16” Acrylic
“
“
“
“
“
“
22” Acrylic
“
“
“
“
“
“
25” Acrylic
“
“

ALX175MH-volts-PSB-PR16 ‡
ALX200MH-volts-PSB-PR16 *
ALX250MH-volts-PSB-PR16 *
ALX320MH-volts-PSB-PR16 †∆
ALX350MH-volts-PSB-PR16 †∆
ALX400MH-volts-PSB-PR16 †∆
ALX450MH-volts-PSB-PR16 †∆
ALX175MH-volts-PSB-PR22 *
ALX200MH-volts-PSB-PR22 *
ALX250MH-volts-PSB-PR22 *
ALX320MH-volts-PSB-PR22 *
ALX350MH-volts-PSB-PR22 *
ALX400MH-volts-PSB-PR22
ALX450MH-volts-PSB-PR22 † ∆
ALX750MH-volts-PSB-PR25 ‡ ∆
ALX875MH-volts-PSB-PR25 ∆
ALX1000MH-volts-PSB-PR25 ‡ ∆

16” Acrylic
“
“
22” Acrylic
“
“

ALX150HP-volts-PR16
ALX250HP-volts-PR16
ALX400HP-volts-PR16
ALX150HP-volts-PR22
ALX250HP-volts-PR22
ALX400HP-volts-PR22

Pulse Start Metal Halide

COMMERCIAL & RETAIL

Prisma-Lux
22” Reflector (Max 450W)

PRISMA-LUX
Acrylic Highbay Reflectors
Acrylic Reflectors
•With 16”, 22” or 25” acrylic reflectors

PARKING & CANOPY

Plumb Mounting
• The fixture is designed to hang plumb without extra
work for the contractor.
Full Range of Accessories
• Prisma-lux™ is available with most common accessories
including fusing, quartz auxiliary lights, hooks, lenses
and guards.
Finish
•White ballast housing

SECURITY

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.
Socket
• Specification grade porcelain lampholder.

AREA

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

175
200
250
320
350
400
450
175
200
250
320
350
400
450
750
875
1000

Mogul
“
“
“
“
“
“
Mogul
“
“
“
“
“
“
“
“
“

High Pressure Sodium
150
250
400
150
250
400

Mogul
“
“
“
“
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V (150 to 450W )
“- 480” 480V (150 to 450W )
“- H2” 347V / 480V (750W to 1000W)

Options

Accessories

Description

Lamp

Factory pre-wired

22”

Open Bottom
Closed Bottom

❶
✔
❶
✔

25”

Open Bottom
Closed Bottom

—
—

FLOODLIGHTING

16”

Open Bottom
Closed Bottom

❶
✔
❶
✔
—
—

✔
✘
✔
✔
✔
✔

—
—
—
—

✔
✘

❶ Available – requires
lampholder for protected
lamp - See Options
✔ Available with
indicated wattage
✘ NOT available

Dimensions
D

H

3/4” Hub

SPECIALTY

Nom. Dia.
16
16” 20-3⁄8”
22 22-3⁄8” 23-3⁄8”
25
25” 25-3/8”

Coated Lamp - CL
Clear Lamp - L
- See Accessories
Cord only - C
Hook & cord - HC

Lampholder For Protected Lamp
(Order Lamp Separately)

- PLS

Pulse Start Luminaires
High Performance Metal Halide

See above

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

H

D

-Q

Protected Igniter For HPS Luminaires
- PI
Fuse Holder
Single fuse - F1
Supplied with fuse
Two fuses - F2
On multi-tap ballasts indicate line voltage

** For lengths other than 3 feet, revise the 3
in the catalog number to the length in feet.
16

Description

Suffix

Bottom Closure
To order with bottom closure

Reflector Application Guide With Acrylic Parts (Ambient 25°C)
Dia.
Watts
175 250 400 1000

* Must use a bottom closure (See “Reflector Application Guide” below for
maximum wattage) or a protected lamp (See “Options - Lampholder”)
† Must use protected lampholder and protected lamp
‡ Protected lamp not available
∆ Not available with bottom closure

- LSP

Catalog No.

Safety Hook - 3/4”NPT

Male HK75SSB
Female HF75SSB

Cord Set - 3’ long **
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)

Q-DECK

Ballast Safety Chain - 3’ long **

ALX-BSC3

Optical Assembly Safety Cable

ALX-RSC

Wire Guard

16” dia reflector PR-16WG
22” dia reflector PR-22WG
25” dia reflector PR-25WG

Top Shroud

ALX-SS

Bottom Closure
See Reflector Application Guide for Max Watt
Conical
Drop
Acrylic
Acrylic

Flat
Glass

16”
22”
25”

PR-16CL
PR-22CL
PR-25CL

PR-16DL
PR-22DL
–

Power Hook
Receptacle, hook and box
HI/LO Systems Bi-Level Switching
Accuflex Modular Wiring

PR-16BL
PR-22BL
–
HBPH-volts
See page 17
See page 18

HI/LO Systems™

Bi-Level Switching, Individual or Groups

Ordering Information
Bi-Level Switching For Individual Luminaires
Lamp: All HID lamps from 150W thru 1000W
Ballast: 120V thru 277V
Luminaires: Suitable for use on all AccuLite™ highbay
and lowbay luminaires.
Ambient: Maximum 65˚C .
Integral HI/LO Bi-Level Switching Control:
To order add suffix to luminaire catalog number - HI/LO

•The system warms the lamps up to
full brightness for 15 minutes
ensuring maximum lamp life and
lamp warranty. After warm up it
automatically switches to “LO”
energy saving mode. When motion
is sensed at the transmitter, the
lighting automatically comes up to
full brightness.

Lamp: All HID lamps from 150W thru 1000W
Ballast:120V thru 277V Luminaires:
Suitable for use on all AccuLite highbay and lowbay
luminaires.
Maximum: 30 luminaires per sensor module.
Ambient: Maximum 55˚C
Luminaire with HI/LO Switch Module:
To order add suffix to luminaire catalog number - CWSM
Occupancy Detector: Sensor for aisle lighting. (Non adjustable, not suitable for area sensing applications.)
Order catalog number HI/LO-IRMS
Manual Override: Order catalog number HI/LO-MO

•Manual Overrides/ General Purpose
Transmitter: Converts an on/off
signal to a HI/LO signal, then sends
the signal to the luminaire. Signals
are converted from many devices
including time clocks, switches,
photocontrols and integral key
switches.
•Control Wire: The system uses a high
voltage control wire to connect the
transmitters to the luminaires to be
switched from high to low.
•Long Aisles: When long aisles
require installation of a third sensor,
it is a viable option to install from
one to five individually controlled
luminaires in the midsection of the
aisle.

SPECIALTY

UL Listed: For dry or damp locations.

•The system warms the lamps up to
full brightness for 15 minutes
ensuring maximum lamp life and
lamp warranty. After warm up it
automatically switches to “LO”
energy saving mode. When motion
is sensed at the transmitter, the
lighting automatically comes up to
full brightness. After 5 minutes of no
activity, the system returns to “LO”.

•Infrared Motion Detector: Passive
infrared detector detects motion in
the controlled area and signals the
luminaire to go to full brightness.

FLOODLIGHTING

Ordering Information
Bi-Level Switching For Groups of Luminaires

•HI/LO Receiver: All AccuLite™ Metal
Halide, Pulse Start Metal Halide or
High Pressure Sodium indoor
luminaires can be equipped with an
electronic receiver and HI/LO
ballast.

AREA

Hi/Lo Bi-Level Switching
of Groups of Luminaires

The System:
•The system consists of an infrared
motion detector placed near the ends
of the aisles and a switching module
mounted on each luminaire. A
general purpose transmitter /override
device can control the switching
modules. Installed in a two gang
box it can be used with a photocell,
time clock, or manual switch.

Periodic Additions:
•Install individually controlled
luminaires when periodic additions
are made to a complete HI/LO
system.

SECURITY

Control Wire
Bi-Level, For Groups of Luminaires
•Control Wire HI/LO systems from
AccuLite™ are the value approach to
achieving energy savings. This bilevel system increases the energy
savings of high performance
luminaires, lamps and ballasts.

Small Areas:
•For small areas using only a few
luminaires, it is not necessary to buy
and install separate transmitters and
control cables, so equipment and
installation costs are reduced.

PARKING & CANOPY

UL Listed: For dry locations

The System:
•The system for bi-level switching
individual luminaires consists of an
infrared motion detector and a
switching module mounted on each
luminaire.

Cross Aisles:
•When used at warehouse cross aisles
the entire aisle is not activated when
a person or a fork lift passes at 90°
to the aisle. Only the luminaire at
the intersection goes to full
brightness.

COMMERCIAL & RETAIL

Hi/Lo Bi-Level Switching
of Individual Luminaires

•The individual luminaire b--level
control system allows one to adjust
the time the luminaire stays at full
brightness after motion ceases.
Adjustment from one to fifteen
minutes (approx.).

Moveable Aisles:
•Single luminaire bi-level switching is
used for warehouse areas where
aisle architecture is not preset (ie.
where aisles shift location as stock is
moved or replenished). Entire aisles
do not switch to “HI” mode, only
those luminaires which sense motion
do so.

LOWBAY

•Individual Bi-Level Switching:
Luminaire is installed anywhere
individual fixtures can be allowed to
switch from high to low
independently and where remote
control is not required (now or in the
future).

HIGHBAY

Integral
Switches Individual Luminaires

Components – Control Wire System

17

Modular Wiring System

PARKING & CANOPY

COMMERCIAL & RETAIL

LOWBAY

HIGHBAY

Accuflex™

Accuflex
Modular Wiring System
Modular Wiring Benefits
•Reduces installed cost.
•Fixtures are portable.
•UL certified for make and break under load.

•Wiring - two, three or four #12 AWG THHN stranded copper,
600V plus one bare #12 AWG solid copper ground wire, prewired for the distribution of one, two or three circuits.

•Meets NEC article 604.

•Head is 18 gauge steel, zinc plated.

SECURITY

•Potential tax benefits.

•Meets or exceeds UL standard for safety #183.

• Die cast housing with zinc plated steel cover plate.

Design Features
•Metal encased.

•Male cable head has positive acting steel spring latches which
provide grounding of non-current carrying metal equipment.

•5 wire capability for three circuits plus ground.

Fixture Cable
•Provides feed through power-in/power out connection for the
fixture, plus supplying “A”, ”B” or “C” phase circuit to the fixture.

•Fully grounded.

AREA

•Voltage specific pin and socket contacts.

FLOODLIGHTING

Distribution Cable
•Starting point of the modular wiring system.

•6” leads for wiring ease.
•Head is 18 gauge steel, zinc plated.

•Prewired female connector - maximum 20 amps per circuit.

•Die cast housing with zinc plated steel cover plate.

•Wiring - two, three or four #12 AWG THHN stranded copper,
600V plus one bare #12 AWG solid copper ground wire, prewired for the distribution of one, two or three circuits.

•Male cable head has positive acting steel spring latches which
provide grounding of non-current carrying metal equipment.

Extension Cable
•Provides feed through power-in / power-out connection for the
continuation of three circuit power .

SPECIALTY

•Male power-in head uses type MC cable.

•Mounts through 1/2” knockout to junction box.

•Color coded
120V: white, black, red, blue, green.
277V: White, orange, brown, yellow, green.
120V power isolated ground: black, red, green,
green with yellow stripes.

•Male power-in head and female power--out head - maximum 20
amps per circuit.
•Extension cables can plug into each other in tandem when longer
lengths are required.

18

•Can be factory pre-wired or field installed.

Phase Splitter
•Phase splitters have power-in / power-out connectors for the
continuation of three circuit power to the next fixture and a power
out connector for supplying an “A”, “B” or “C” phase circuit to
phase tap on H.I.D. luminaires.
•Phase Splitters allow a fixture to be removed without interrupting
the circuit to the other luminaires
•Low profile 5-1-8” X 3-1/8” X 12/16”.
•Thru-wired for three circuits.
•Die cast housing with zinc plated steel cover plate.
•Internal Wires: #12 AWG THHN stranded copper, 600V plus
one bare #12 AWG solid tinned copper ground conductor.

Accuflex™

Modular Wiring System
HIGHBAY

Product
Code

Volts

Cable
Function

Number
of Circuits

Cable Length
(Specify - in feet)

Metal
Distribution
HalideCable

LOWBAY

Sample catalog number (277V, Distribution Cable, 2 circuits, 10 feet long): AF-27DC-B-10
AF
-27
DC
-B
-10
AF = Accu-Flex™ 12 = 120V DC = Distribution A = Single Circuit
XX =
20 = 208V
Cable
Two wires plus ground
24 = 240V
B = Two Circuits
27 = 277V
Three wires plus ground
34 = 347V
C = Three Circuits
48 = 480V
Four wires plus ground

Indicates
cable length
(specify required
length in feet)

COMMERCIAL & RETAIL

Accuflex
Distribution Cable

Metal
Extension
Halide
Cable
Sample catalog number (277V, Extension Cable, 2 circuits, 10 feet long): AF-27EC-B-10
AF
-27
EC
-B
-10
12 = 120V
2 0 = 208V
24 = 240V
27 = 277V
34 = 347V
48 = 480V

EC = Extension
Cable

A = Single Circuit
Two wires plus ground
B = Two Circuits
Three wires plus ground
C = Three Circuits
Four wires plus ground

XX = Indicates
cable length
(specify required
length in feet)

PARKING & CANOPY

AF = Accu-Flex™

Accuflex
Extension Cable

Volts

Cable
Function

Circuit

SECURITY

Product
Code

Cable Length
(Specify - in feet)

Metal
FixtureHalide
Cable
Sample catalog number (277V, Fixture Cable, MC Cable, Circuit B, 10 feet long): AF-27MC-B-10
AF
-27
MC
-B
-10
AF = Accu-Flex™

MC = MC Fixture Cable A = Circuit A
B = Circuit B
Consult factory
C = Circuit C

XX = Indicates
cable length

for cabtire or
“SO” cord drops

AREA

12 = 120V
20 = 208V
24 = 240V
27 = 277V
34 = 347V
48 = 480V

Accuflex
Fixture Cable

FLOODLIGHTING

Product
Code

Function

Metal
Blanking
Halide
Cover
Sample catalog number AF-BC
AF
-BC
AF = Accu-Flex™

BC = Blanking Cover

Required to close any end cable with exposed pins

SPECIALTY

Accuflex
Blanking Cover

19

HIGHBAY

Lowbays
Indoor and Outdoor General Lighting of Industrial, Commercial,
Retail Store, Recreation and Sports Facilities with Ceiling Heights under 25 Feet

LOWBAY

Accessories: Hi/Lo Switching, Remote Ballasts and Accuflex Modular Wiring System
Accuglo - Best Product
High performance optics reduces number of fixtures required, lowering installation and operating costs
Choice of three different models to solve application-specific needs
COMMERCIAL & RETAIL

Low Profile models available for height-constrained applications
Heavy duty, finned/compartmentalized die-cast aluminum ballast housing
maximizes ballast life and results in exceptionally quiet operation

PARKING & CANOPY

Lamp wattages up to 450 watts
Accuglo (EGA/MEGA)

Accuglo (AG/MAG)

Totally Enclosed and Gasketed

Standard Optical Assembly

Optical and Ballast Assemblies
• Approved

for wet locations

such as wash down applications
in food plants
• Supplied

• Enclosed

luminaire for lowbay

applications
Gasketed Optical Assembly
• Gasketed

with “breather” assembly

at lens and ballast for

use in dusty/dirty environments

to keep optical assembly clean and
SECURITY

prevent internal condensation

Vertibay - Better Product
Die-cast ballast housing
High reflectance white reflector for optimum photometric performance

AREA

Vertibay
• 16”

White Reflector

• Acrylic

Refractor

• 175W-450W

MH

FLOODLIGHTING

250W-400W HPS

Lo-Lux - Good Product
Economy sheet metal ballast housing
Lamp wattages up to 450 watts
Lo-Lux

SPECIALTY

• 22”

Aluminum Reflector

• Acrylic

20

Verti-Lux

Lens

• 16”

Aluminum Reflector

• Acrylic

Refractor

Accuglo™

Lowbay Luminaire
Lamp
Base

Reflector
(Diameter)

HIGHBAY

Lamp
Watts

Enclosed
Optical Assembly

Metal Halide

MAG

AG

16” (Max 250W)

22” (Max 450W)

Medium
Mogul
Mogul
”
”

16”
16”
22”
”
”

MAG175MH-volts
MAG250MH-120*
AG175MH-volts
AG250MH-volts
AG400MH-volts

16”
”
”
”
”
”
22”
”
”
”
”
”
”

MAG50MH-120‡
MAG70MH-volts
MAG100MH-volts
MAG150MH-volts
MAG175MH-volts-PSB
MAG200MH-volts-PSB
AG175MH-volts-PSB
AG200MH-volts-PSB
AG250MH-volts-PSB
AG320MH-volts-PSB
AG350MH-volts-PSB
AG400MH-volts-PSB
AG450MH-volts-PSB

16”
”
”
”
”
22”
”
”

MAG35HP-120‡
MAG50HP-120‡
MAG70HP-volts
MAG100HP-volts
MAG150HP-volts
AG150HP-volts
AG250HP-volts
AG400HP-volts

LOWBAY

175
250
175
250
400

Pulse Start Metal Halide

LPAG

AG & MAG
Low Surface Brightness
High Performance Lowbay Luminaire

Easy Installation
•Heavy duty spring tension latches secure the reflector.
Cool Operating
•Heavy duty die cast aluminum ballast housing.
Finish
•White polyester powder coat finish.

High Pressure Sodium
35
50
70
100
150
150
250
400

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Options

•Gasket between the ballast and reflector.

Description

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Lamp
Coated Lamp
Clear Lamp

AG

3/4” Hub
16-1/2”

3/4” Hub

LPAG (Low profile)

17-1/2”

Female HF75SS

Pulse Start Luminaires
High Performance Metal Halide
250W Series MAG not available

Q-Deck Plate For quick mounting
(Mounting screws not included)

See above
- POT
-Q
- PI

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Ballast Safety Chain - 3’ long ∆
For AG Series AG-BSC3
For MAG Series MAG-BSC3
Optical Assembly Safety Cable
For AG Series AG-RSC
For MAG Series MAG-RSC
Wire Guard White

For AG Series AG-WG
For MAG Series MAG-WG

Power Hook
Receptacle, hook and box

Low Profile Luminaires
Change AG to LPAG
MAG (200W Max) to LPMAG

HI/LO Systems Bi-Level switching
Accuflex Modular Wiring

- LSP

Q-DECK

HBPH-volts
See page 27
See page 28

SPECIALTY

25-1/2”
11-5/16”

3/4” Hub

28-1/4”

Male HK75SS

Ballast
Luminaires with magnetic ballast – see above
Luminaires with electronic ballast – see page 53

Protected Igniter for HPS Luminaires

22-1/2”

- CL
-L

Catalog No.

Safety Hook 3/4”NPT

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

16-9/32”

Description

Suffix

Potted Ballasts For low noise requirements

3/4” Hub

22-1/2”

LPMAG (Low profile)

Accessories

FLOODLIGHTING

MAG

‡ 277V available – change “-120” to “-277”
* 250W Series MAG: Available 120V or 347V – change “120” to “347”

AREA

Socket
•Specification grade porcelain lampholder.

Dimensions

Medium
”
”
”
”
Mogul
”
”

SECURITY

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

PARKING & CANOPY

High Performance Optical Assembly
•Low surface brightness luminaire with high reflectance
(95%) white polyester powder coat finish (inside and
outside surfaces) and acrylic lens.

Medium
”
”
”
”
”
Mogul
”
”
”
”
”
”

COMMERCIAL & RETAIL

Low Profile

50
70
100
150
175
200
175
200
250
320
350
400
450

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

16-9/32”
22-1/2”

21

Accuglo™
HIGHBAY

Enclosed Lowbay Luminaire -w/Gasketed Optical Assembly
Lamp
Watts

Lamp
Base

Reflector
(Diameter)

Gasketed
Optical Assembly

Medium
Mogul
Mogul
”
”

16”
16”
22”
”
”

MAG175MH-volts-RG
MAG250MH-volts-RG*
AG175MH-volts-RG
AG250MH-volts-RG
AG400MH-volts-RG

16”
”
”
”
”
”
22”
”
”
”
”
”
”

MAG50MH-120-RG‡
MAG70MH-volts-RG
MAG100MH-volts-RG
MAG150MH-volts-RG
MAG175MH-volts-PSB-RG
MAG200MH-volts-PSB-RG
AG175MH-volts-PSB-RG
AG200MH-volts-PSB-RG
AG250MH-volts-PSB-RG
AG320MH-volts-PSB-RG
AG350MH-volts-PSB-RG
AG400MH-volts-PSB-RG
AG450MH-volts-PSB-RG

16”
”
”
”
”
22”
”
”

MAG35HP-120-RG‡
MAG50HP-120-RG‡
MAG70HP-volts-RG
MAG100HP-volts-RG
MAG150HP-volts-RG
AG1AG150HP-volts-RG
AG250HP-volts-RG
AG400HP-volts-RG

Metal Halide

AG

16” (Max 250W)

22” (Max 450W)

LOWBAY

MAG

175
250
175
250
400

Pulse Start Metal Halide

LPAG

COMMERCIAL & RETAIL

Low Profile

AG & MAG
Low Surface Brightness
High Performance Lowbay Luminaire

PARKING & CANOPY

High Performance Optical Assembly
•Low surface brightness luminaire with high reflectance
(95%) white polyester powder coat finish ( inside and
outside surfaces) and acrylic lens.

50
70
100
150
175
200
175
200
250
320
350
400
450

Medium
”
”
”
”
”
Mogul
”
”
”
”
”
”

Enclosed Luminaires
•Gasketed Optical Assembly for applications where a
totally enclosed and gasketed luminaire is not
necessary.
•Gasketed between the ballast & reflector and between
the reflector & lens.

SECURITY

Easy Installation
•Heavy duty spring tension latches secure the reflector.
Cool Operating
•Heavy duty die cast aluminum ballast housing.
Finish
•White polyester powder coat finish.
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

FLOODLIGHTING

Dimensions
3/4” Hub

LPAG (Low profile)

35
50
70
100
150
150
250
400

Medium
”
”
”
”
Mogul
”
”

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

3/4” Hub

28-1/4”

SPECIALTY

MAG

3/4” Hub

LPMAG (Low profile) 3/4” Hub
25-1/2”

16-1/2”
11-5/16”
16-9/32”
22

16-9/32”

Catalog No.

- CL
-L

Male HK75SS
Female HF75SS

Ballast
Luminaires with magnetic ballast – see above
Luminaires with electronic ballast – see page 53

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)

Pulse Start Luminaires
High Performance Metal Halide
250W Series MAG not available

Q-Deck Plate For quick mounting
(Mounting screws not included)

Protected Igniter for HPS Luminaires
22-1/2”

Description

Safety Hook 3/4”NPT

Lamp
Coated Lamp
Clear Lamp

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

17-1/2”

22-1/2”

Accessories
Suffix

Potted Ballasts For low noise requirements

22-1/2”

‡ 277V available – change “-120” to “-277”
* 250W Series MAG: Available 120V or 347V – change “120” to “347”

Options
Description

Socket
•Specification grade porcelain lampholder.

AG

High Pressure Sodium

See above
- POT
-Q
- PI

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

For AG Series AG-BSC3
For MAG Series MAG-BSC3

Optical Assembly Safety Cable
For AG Series AG-RSC
For MAG Series MAG-RSC
Wire Guard White

For AG Series AG-WG
For MAG Series MAG-WG

Power Hook
Receptacle, hook and box

Low Profile Luminaires
Change AG to LPAG
MAG(200W Max) to LPMAG
Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Ballast Safety Chain 3’ long ∆

HI/LO Systems Bi-Level switching
Accuflex Modular Wiring
- LSP

Q-DECK

HBPH-volts
See page 27
See page 28

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Accuglo™

Totally Enclosed & Gasketed Lowbay Luminaire
HIGHBAY

Lamp
Watts

Lamp
Base

Reflector
(Diameter)

3/4” Pendant Mount
Standard Profile

Medium
Mogul
Mogul
”
”

16”
16”
22”
”
”

MEGA175MH-volts
MEGA250MH-120*
EGA175MH-volts
EGA250MH-volts
EGA400MH-volts

16”
”
”
”
”
”
22”
”
”
”
”
”
”
”

MEGA50MH-120‡
MEGA70MH-volts
MEGA100MH-volts
MEGA150MH-volts
MEGA175MH-volts-PSB
MEGA200MH-volts-PSB
EGA175MH-volts
EGA175MH-volts-PSB
EGA200MH-volts-PSB
EGA250MH-volts-PSB
EGA320MH-volts-PSB
EGA350MH-volts-PSB
EGA400MH-volts-PSB
EGA450MH-volts-PSB

16”
”
”
”
”
22”
”
”

MEGA35HP-120‡
MEGA50HP-120‡
MEGA70HP-volts
MEGA100HP-volts
MEGA150HP-volts
EGA150HP-volts
EGA250HP-volts
EGA400HP-volts

Metal Halide

LOWBAY

175
250
175
250
400

Pulse Start Metal Halide

EGA

16” Reflector (Max 250W)

22” Reflector (Max 450W)

EGA & MEGA
Low Surface Brightness
High Performance Lowbay Luminaire

Totally Enclosed and Gasketed
•Certified for enclosed and gasketed applications.
•Gasketed at the junction box, ballast assembly and
optical assembly.
•Furnished with a charcoal filtered breather to prevent
the build up of moisture in the fixture and keep it clean.

Easy Installation
•Heavy duty spring tension latches secure the reflector.
Cool Operating
•Heavy duty die cast aluminum ballast housing.

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

Ballasts
•HPF ballasts are suitable low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Dimensions
MEGA

3/4” Hub

EGA

3/4” Hub

16-9/32”

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

‡ 277V available – change “-120” to “-277”
* 250W Series MEGA: Available 120V or 347V – change “120” to “347”

Options
Description

Accessories

Lamp
Coated Lamp
Clear Lamp
Pulse Start Luminaires
High Performance Metal Halide
2250W Series MEGA not available
Potted Ballasts For low noise requirements
Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included
Protected Igniter for HPS Luminaires

Description

Suffix

- CL
-L
See above
- POT
-Q
- PI

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage
NSF Certification
Standard 2 Food Equipment
Manufactured to NSF Criteria C2

- NF

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP

Catalog No.

Safety Hook – Enclosed & Gasketed
- 3/4”NPT
Male EHK75SS
Female EHF75SS
Cord Set - 3’ long ∆
3 conductor, Type ST105.

Cord only 3C-SOW

Q-Deck Plate For quick mounting
(Mounting screws not included)

Q-DECK

Ballast Safety Chain 3’ long ∆
For EGA Series AG-BSC3
For MEGA Series MAG-BSC3
Optical Assembly Safety Cable
For EGA Series AG-RSC
For MEGA Series MAG-RSC
Wire Guard White

For EGA Series

AG-WG

For MEGA Series MAG-WG
∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

SPECIALTY

22-1/2”

16-1/2”

Medium
”
”
”
”
Mogul
”
”

FLOODLIGHTING

Socket
•Specification grade porcelain lampholder.

35
50
70
100
150
150
250
400

AREA

Finish
•White polyester powder coat finish.

High Pressure Sodium

SECURITY

Standard 2 Food Equipment (Washdown)
•Certified to NSF Criteria C2, enclosed and gasketed
Accuglo™ fixtures are suitable for washdown
application. Suitable for 1000 PSI. Add suffix “-NF”.

PARKING & CANOPY

High Performance Optical Assembly
•Low surface brightness luminaire with high reflectance
(95%) white polyester powder coat finish ( inside and
outside surfaces) and acrylic lens.

Medium
”
”
”
”
”
Mogul
“
”
”
”
”
”
”

COMMERCIAL & RETAIL

MEGA

50
70
100
150
175
200
175
175
200
250
320
350
400
450

22-1/2”
23

HIGHBAY

Vertibay™

Aisle Lighting Luminaire
Lamp
Watts

Lamp
Base Refractor

Cat. No. Type II
3/4” Pendant Mount

Cat. No. Type V
3/4” Pendant Mount

Metal Halide

LOWBAY

175
250
400

Mogul
“
“

HB3-175MH-volts-AC2†
HB3-250MH-volts-AC2 †
HB3-400MH-volts-AL2§

Open
“
“

HB3-175MH-volts-AC5†
HB3-250MH-volts-AC5†
HB3-400MH-volts-AL5§

Pulse Start Metal Halide

Vertibay

COMMERCIAL & RETAIL

16” Open Lens (Max 450W)

HB3
Economical Cast Fixtures
with Open 16” Acrylic Refractors

PARKING & CANOPY

Optical Assembly
•16” acrylic open refractor standard.
•Two distributions, long and narrow or symmetrical.
•White polyester powder coat aluminum upper reflector.

175
200
250
320
350
400
450

Mogul
“
“
“
“
“
“

Open
“
“
“
“
“
“

HB3-175MH-volts-PSB-AL2†
HB3-200MH-volts-PSB-AL2 †
HB3-250MH-volts-PSB-AL2†
HB3-320MH-volts-PSB-AL2†
HB3-350MH-volts-PSB-AL2†
HB3-400MH-volts-PSB-AL2§
HB3-450MH-volts-PSB-AL2†

HB3-175MH-volts-PSB-AL5†
HB3-200MH-volts-PSB-AL5†
HB3-250MH-volts-PSB-AL5†
HB3-320MH-volts-PSB-AL5†
HB3-350MH-volts-PSB-AL5†
HB3-400MH-volts-PSB-AL5§
HB3-450MH-volts-PSB-AL5†

HB3-150HP-volts-AL2
HB3-250HP-volts-AL2
HB3-400HP-volts-AL2

HB3-150HP-volts-AL5
HB3-250HP-volts-AL5
HB3-400HP-volts-AL5

High Pressure Sodium
150
250
400

Mogul
“
“

Open
“
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

† Supplied with lampholder for protected lamp.
§ Supplied with lampholder for standard lamp – to order lampholder for
protected lamp add suffix -PLS

Cast Housing
•Die cast aluminum ballast housing.
•White polyester power coat finish.

SECURITY

Easy Install Mounting
•Extra large junction box with slide top adapter.
Junction box has feed-thru1/2” knockouts.
Full Range of Accessories
• Vertibay is available with most common accessories
including fusing, quartz auxiliary lights and hooks.
Finish
•White polyester powder coat finish.

AREA

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.
Socket
• Specification grade porcelain lampholder.

FLOODLIGHTING

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Options

Accessories

Description

- CL
-L

Pulse Start Luminaires
High Performance Metal Halide
Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included
Protected Igniter For HPS Luminaires

- See above

Male HK75SSB
Female HF75SSB

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)

-Q

Q-Deck Plate For quick mounting
(Mounting screws not included)

- PI

Ballast Safety Chain - 3’ long ∆

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Power Hook

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

HI/LO Systems Bi-Level switching
Accuflex Modular Wiring

Dimensions

20-3/4”

16-1/4”

SPECIALTY

Catalog No.

Safety Hook - 3/4”NPT

3/4” Hub

24

Description

Suffix

Lamp
Coated Lamp
Clear Lamp

- LSP

Q-DECK
HB3-BSC3
HBPH-volts

Receptacle, hook and box
See page 27
See page 28

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

ALX™

Economy Lowbay Luminaire

Lamp
Base

HIGHBAY

Lamp
Watts

Cat. No.
(No Hook / No Cord)
3/4” Pendant Mount

Reflector
(Nom. Dia.)

Metal Halide
Mogul
“
“

22” Aluminum/Acrylic
“
“

ALX175MH-volts-LB
ALX250MH-volts-LB
ALX400MH-volts-LB

22” Aluminum/Acrylic
“
“
“
“
“
“

ALX175MH-volts-PSB-LB
ALX200MH-volts-PSB-LB
ALX250MH-volts-PSB-LB
ALX320MH-volts-PSB-LB
ALX350MH-volts-PSB-LB
ALX400MH-volts-PSB-LB
ALX450MH-volts-PSB-LB

22” Aluminum/Acrylic
“
“

ALX150HP-volts-LB
ALX250HP-volts-LB
ALX400HP-volts-LB

LOWBAY

175
250
400

Pulse Start Metal Halide

22” Reflector (Max 450W)

LO-LUX
Aluminum Lowbay Reflectors
Enclosed Aluminum Reflectors
•22” reflector with acrylic lens.

Plumb Mounting
• The fixture is designed to hang plumb without extra
work for the contractor.
Full Range of Accessories
• Lo-lux™ is available with most common accessories
including fusing, quartz auxiliary lights, hooks and
guards.

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.
Socket
• Specification grade porcelain lampholder.

MH-30°C, Pulse Start MH -40°C, HPS -40°C

Mogul
“
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Options

Accessories

Description

Safety Hook - 3/4”NPT

Lamp
Coated Lamp
Clear Lamp

- CL
-L

Pulse Start Luminaires
High Performance Metal Halide
Factory pre-wired

Description

Suffix

See above

Cord only - C
Hook & cord - HC

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

-Q

Protected Igniter For HPS Luminaires

- PI

Catalog No.

Male HK75SSB
Female HF75SSB

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)
Ballast Safety Chain - 3’ long ∆
Optical Assembly Safety Cable

Q-DECK
ALX-BSC3
ALX-RSC

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Wire Guard for 22” reflector

ALX-WG22

Power Hook
Receptacle, hook and box

HBPH-volts

Enclosed Optical Assembly
Fully gasketed optical assembly

HI/LO Systems Bi-Level Switching

See page 27

Accuflex Modular Wiring

See page 28

-RG

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP

AREA

Ballasts
• HPF ballasts are suitable for low temperature starting.

150
250
400

SECURITY

Finish
•White ballast housing

High Pressure Sodium

PARKING & CANOPY

Enclosed Optical Assembly
•With heat resistant hinged glass lens, three stainless
steel lens clips and silicone rubber gaskets.

Mogul
“
“
“
“
“
“

COMMERCIAL & RETAIL

Lo-Lux

175
200
250
320
350
400
450

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Dimensions
FLOODLIGHTING

3/4” Hub

22-1⁄2”

SPECIALTY

22-1⁄2”

25

Economy Aisle Lighting Luminaire

HIGHBAY

ALX™

Lamp
Watts

Lamp
Base Refractor

Cat. No. Type II
3/4” Pendant Mount

Cat. No. Type V
3/4” Pendant Mount

Metal Halide

LOWBAY

175
250
400

Mogul
“
“

Open
“
“

ALX175MH-volts-AL2†
ALX250MH-volts-AL2 †
ALX400MH-volts-AL2§

ALX175MH-volts-AL5†
ALX250MH-volts-AL5†
ALX400MH-volts-AL5§

Pulse Start Metal Halide

Verti-Lux

COMMERCIAL & RETAIL

16” Open Lens (Max 450W)

VERTI-LUX
Aisle Lighter

PARKING & CANOPY

Open Optical Assembly
• 16” acrylic open refractor standard.
• Two distributions, long and narrow or symmetrical.

SECURITY

• White polyester powder coat aluminum upper reflector.
Plumb Mounting
• The fixture is designed to hang plumb without extra work for the contractor.
Full Range of Accessories
• Verti-lux™ is available with most common accessories including fusing,
quartz auxiliary lights and hooks.
Hook and Cord
• Furnished with a factory wired hook and 3’ cord.
Finish
• White ballast housing
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

AREA

Socket
• Specification grade porcelain lampholder.
Ballasts
• HPF ballasts are suitable for low temperature starting. MH-30°C, Pulse
Start MH -40°C, HPS -40°C

175
200
250
320
350
400
450

Mogul
“
“
“
“
“
“

Open
“
“
“
“
“
“

ALX175MH-volts-PSB-AL2†
ALX200MH-volts-PSB-AL2†
ALX250MH-volts-PSB-AL2†
ALX320MH-volts-PSB-AL2†
ALX350MH-volts-PSB-AL2†
ALX400MH-volts-PSB-AL2§
ALX450MH-volts-PSB-AL2†

ALX175MH-volts-PSB-AL5†
ALX200MH-volts-PSB-AL5†
ALX250MH-volts-PSB-AL5†
ALX320MH-volts-PSB-AL5†
ALX350MH-volts-PSB-AL5†
ALX400MH-volts-PSB-AL5§
ALX450MH-volts-PSB-AL5†

ALX150HP-volts-AL2
ALX250HP-volts-AL2
ALX400HP-volts-AL2

ALX150HP-volts-AL5
ALX250HP-volts-AL5
ALX400HP-volts-AL5

High Pressure Sodium
150
250
400

Mogul
“
“

Open
“
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Options

Accessories

Description

Lamp
Items noted ”*“ above must have either a
bottom closure and standard lamp or
protected lampholder and protected lamp.
Coated Lamp
Clear Lamp
Pulse Start Luminaires
High Performance Metal Halide
Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included
Protected Igniter For HPS Luminaires

- CL
-L
See above

- PI

Cord only - C
Hook & cord - HC

3/4” Hub

SPECIALTY

21”

16-1/4”

Male HK75SSB
Female HF75SSB

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Dimensions

Catalog No.

Safety Hook - 3/4”NPT

-Q

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

FLOODLIGHTING

Description

Suffix

Factory pre-wired

26

† Supplied with lampholder for protected lamp.
§ Supplied with lampholder for standard lamp – to order lampholder for
protected lamp add suffix -PLS

- LSP

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord only 3C
Cord & Twist Lock Plug 3C-TLP-(volts)-(amps)
(15A or 20A available)
Q-Deck Plate For quick mounting
(Mounting screws not included)
Ballast Safety Chain - 3’ long ∆
Power Hook

Q-DECK
ALX-BSC3
HBPH-volts

Receptacle, hook and box
HI/LO Systems Bi-Level Switching
Accuflex Modular Wiring

See page 27
See page 28

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

HI/LO Systems™

Bi-Level Switching, Individual or Groups

Ordering Information
Bi-Level Switching For Individual Luminaires
Lamp: All HID lamps from 150W thru 1000W
Ballast: 120V thru 277V
Luminaires: Suitable for use on all AccuLite™ highbay
and lowbay luminaires.
Ambient: Maximum 65˚C .
Integral HI/LO Bi-Level Switching Control:
To order add suffix to luminaire catalog number - HI/LO

•The system warms the lamps up to
full brightness for 15 minutes
ensuring maximum lamp life and
lamp warranty. After warm up it
automatically switches to “LO”
energy saving mode. When motion
is sensed at the transmitter, the
lighting automatically comes up to
full brightness.

Lamp: All HID lamps from 150W thru 1000W
Ballast:120V thru 277V Luminaires:
Suitable for use on all AccuLite highbay and lowbay
luminaires.
Maximum: 30 luminaires per sensor module.
Ambient: Maximum 55˚C
Luminaire with HI/LO Switch Module:
To order add suffix to luminaire catalog number - CWSM
Occupancy Detector: Sensor for aisle lighting. (Non adjustable, not suitable for area sensing applications.)
Order catalog number HI/LO-IRMS
Manual Override: Order catalog number HI/LO-MO

•Manual Overrides/ General Purpose
Transmitter: Converts an on/off
signal to a HI/LO signal, then sends
the signal to the luminaire. Signals
are converted from many devices
including time clocks, switches,
photocontrols and integral key
switches.
•Control Wire: The system uses a high
voltage control wire to connect the
transmitters to the luminaires to be
switched from high to low.
•Long Aisles: When long aisles
require installation of a third sensor,
it is a viable option to install from
one to five individually controlled
luminaires in the midsection of the
aisle.

SPECIALTY

UL Listed: For dry or damp locations.

•The system warms the lamps up to
full brightness for 15 minutes
ensuring maximum lamp life and
lamp warranty. After warm up it
automatically switches to “LO”
energy saving mode. When motion
is sensed at the transmitter, the
lighting automatically comes up to
full brightness. After 5 minutes of no
activity, the system returns to “LO”.

•Infrared Motion Detector: Passive
infrared detector detects motion in
the controlled area and signals the
luminaire to go to full brightness.

FLOODLIGHTING

Ordering Information
Bi-Level Switching For Groups of Luminaires

•HI/LO Receiver: All AccuLite™ Metal
Halide, Pulse Start Metal Halide or
High Pressure Sodium indoor
luminaires can be equipped with an
electronic receiver and HI/LO
ballast.

AREA

Hi/Lo Bi-Level Switching
of Groups of Luminaires

The System:
•The system consists of an infrared
motion detector placed near the ends
of the aisles and a switching module
mounted on each luminaire. A
general purpose transmitter /override
device can control the switching
modules. Installed in a two gang
box it can be used with a photocell,
time clock, or manual switch.

Periodic Additions:
•Install individually controlled
luminaires when periodic additions
are made to a complete HI/LO
system.

SECURITY

Control Wire
Bi-Level, For Groups of Luminaires
•Control Wire HI/LO systems from
AccuLite™ are the value approach to
achieving energy savings. This bilevel system increases the energy
savings of high performance
luminaires, lamps and ballasts.

Small Areas:
•For small areas using only a few
luminaires, it is not necessary to buy
and install separate transmitters and
control cables, so equipment and
installation costs are reduced.

PARKING & CANOPY

UL Listed: For dry locations

The System:
•The system for bi-level switching
individual luminaires consists of an
infrared motion detector and a
switching module mounted on each
luminaire.

Cross Aisles:
•When used at warehouse cross aisles
the entire aisle is not activated when
a person or a fork lift passes at 90°
to the aisle. Only the luminaire at
the intersection goes to full
brightness.

COMMERCIAL & RETAIL

Hi/Lo Bi-Level Switching
of Individual Luminaires

•The individual luminaire b--level
control system allows one to adjust
the time the luminaire stays at full
brightness after motion ceases.
Adjustment from one to fifteen
minutes (approx.).

Moveable Aisles:
•Single luminaire bi-level switching is
used for warehouse areas where
aisle architecture is not preset (ie.
where aisles shift location as stock is
moved or replenished). Entire aisles
do not switch to “HI” mode, only
those luminaires which sense motion
do so.

LOWBAY

•Individual Bi-Level Switching:
Luminaire is installed anywhere
individual fixtures can be allowed to
switch from high to low
independently and where remote
control is not required (now or in the
future).

HIGHBAY

Integral
Switches Individual Luminaires

Components – Control Wire System

27

Modular Wiring System

PARKING & CANOPY

COMMERCIAL & RETAIL

LOWBAY

HIGHBAY

Accuflex™

Accuflex
Modular Wiring System
Modular Wiring Benefits
•Reduces installed cost.
•Fixtures are portable.
•UL certified for make and break under load.

•Wiring - two, three or four #12 AWG THHN stranded copper,
600V plus one bare #12 AWG solid copper ground wire, prewired for the distribution of one, two or three circuits.

•Meets NEC article 604.

•Head is 18 gauge steel, zinc plated.

SECURITY

•Potential tax benefits.

•Meets or exceeds UL standard for safety #183.

• Die cast housing with zinc plated steel cover plate.

Design Features
•Metal encased.

•Male cable head has positive acting steel spring latches which
provide grounding of non-current carrying metal equipment.

•5 wire capability for three circuits plus ground.

Fixture Cable
•Provides feed through power-in/power out connection for the
fixture, plus supplying “A”, ”B” or “C” phase circuit to the fixture.

•Fully grounded.

AREA

•Voltage specific pin and socket contacts.

FLOODLIGHTING

Distribution Cable
•Starting point of the modular wiring system.

•6” leads for wiring ease.
•Head is 18 gauge steel, zinc plated.

•Prewired female connector - maximum 20 amps per circuit.

•Die cast housing with zinc plated steel cover plate.

•Wiring - two, three or four #12 AWG THHN stranded copper,
600V plus one bare #12 AWG solid copper ground wire, prewired for the distribution of one, two or three circuits.

•Male cable head has positive acting steel spring latches which
provide grounding of non-current carrying metal equipment.

Extension Cable
•Provides feed through power-in / power-out connection for the
continuation of three circuit power .

SPECIALTY

•Male power-in head uses type MC cable.

•Mounts through 1/2” knockout to junction box.

•Color coded
120V: white, black, red, blue, green.
277V: White, orange, brown, yellow, green.
120V power isolated ground: black, red, green,
green with yellow stripes.

•Male power-in head and female power--out head - maximum 20
amps per circuit.
•Extension cables can plug into each other in tandem when longer
lengths are required.

28

•Can be factory pre-wired or field installed.

Phase Splitter
•Phase splitters have power-in / power-out connectors for the
continuation of three circuit power to the next fixture and a power
out connector for supplying an “A”, “B” or “C” phase circuit to
phase tap on H.I.D. luminaires.
•Phase Splitters allow a fixture to be removed without interrupting
the circuit to the other luminaires
•Low profile 5-1-8” X 3-1/8” X 12/16”.
•Thru-wired for three circuits.
•Die cast housing with zinc plated steel cover plate.
•Internal Wires: #12 AWG THHN stranded copper, 600V plus
one bare #12 AWG solid tinned copper ground conductor.

Accuflex™

Modular Wiring System
HIGHBAY

Product
Code

Volts

Cable
Function

Number
of Circuits

Cable Length
(Specify - in feet)

Metal
Distribution
HalideCable

LOWBAY

Sample catalog number (277V, Distribution Cable, 2 circuits, 10 feet long): AF-27DC-B-10
AF
-27
DC
-B
-10
AF = Accu-Flex™ 12 = 120V DC = Distribution A = Single Circuit
XX =
20 = 208V
Cable
Two wires plus ground
24 = 240V
B = Two Circuits
27 = 277V
Three wires plus ground
34 = 347V
C = Three Circuits
48 = 480V
Four wires plus ground

Indicates
cable length
(specify required
length in feet)

COMMERCIAL & RETAIL

Accuflex
Distribution Cable

Metal
Extension
Halide
Cable
Sample catalog number (277V, Extension Cable, 2 circuits, 10 feet long): AF-27EC-B-10
AF
-27
EC
-B
-10
12 = 120V
2 0 = 208V
24 = 240V
27 = 277V
34 = 347V
48 = 480V

EC = Extension
Cable

A = Single Circuit
Two wires plus ground
B = Two Circuits
Three wires plus ground
C = Three Circuits
Four wires plus ground

XX = Indicates
cable length
(specify required
length in feet)

PARKING & CANOPY

AF = Accu-Flex™

Accuflex
Extension Cable

Volts

Cable
Function

Circuit

SECURITY

Product
Code

Cable Length
(Specify - in feet)

Metal
FixtureHalide
Cable
Sample catalog number (277V, Fixture Cable, MC Cable, Circuit B, 10 feet long): AF-27MC-B-10
AF
-27
MC
-B
-10
AF = Accu-Flex™

MC = MC Fixture Cable A = Circuit A
B = Circuit B
Consult factory
C = Circuit C

XX = Indicates
cable length

for cabtire or
“SO” cord drops

AREA

12 = 120V
20 = 208V
24 = 240V
27 = 277V
34 = 347V
48 = 480V

Accuflex
Fixture Cable

FLOODLIGHTING

Product
Code

Function

Metal
Blanking
Halide
Cover
Sample catalog number AF-BC
AF
-BC
AF = Accu-Flex™

BC = Blanking Cover

Required to close any end cable with exposed pins

SPECIALTY

Accuflex
Blanking Cover

29

HIGHBAY

Indoor Remote Ballasts Single
Lamp
Watts

Lamp & Two Lamp Parallel
Single Lamp
Catalog Number

Dim.

Double Lamp
Catalog Number*

Dim.

Metal Halide

LOWBAY

175
250
400
1000

A
A
A
A

SRB175MH-volts
SRB250MH-volts
SRB400MH-volts
SRB1000MH-volts

A
B
B
C

DRB175MH-volts
DRB250MH-volts
DRB400MH-volts
DRB1000MH-volts-POT∆

A
B
B
B
B
B

DRB175MH-volts-PSB-LRS†
DRB250MH-volts-PSB-LRS†
DRB200MH-volts-PSB-LRS†
DRB320MH-volts-PSB-LRS†
DRB350MH-volts-PSB-LRS†
DRB400MH-volts-PSB-LRS†

Pulse Start Metal Halide

COMMERCIAL & RETAIL

SRB & DRB

SRB & DRB
One Lamp and Two Lamp Parallel
Remote Ballasts

PARKING & CANOPY

Segregated Wiring Compartment
•For installer safety and wiring convenience.
Heavy Duty Construction
•18 gauge steel, grey finish, with mounting feet.
Knockouts
•One 1/2” and one 1/2” – 3/4” combination conduit
knock-out on each side of the ballast assembly adjacent
to the wiring compartment.

SECURITY

Ballasts
•Standard HPF ballasts have a minimum starting
temperature – HPS-40°C MH-30°C.
Group Mounted Ballasts
•Group mounted ballasts should be separated by a
space barrier of 6” (minimum horizontal and vertical) to
allow air flow for cooling.

175
200
250
320
350
400

A
A
A
A
A
A

SRB175MH-volts-PSB-LRS†
SRB250MH-volts-PSB-LRS†
SRB200MH-volts-PSB-LRS†
SRB320MH-volts-PSB-LRS†
SRB350MH-volts-PSB-LRS†
SRB400MH-volts-PSB-LRS†

High Pressure Sodium
‡ Consult factory

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

* Two lamp metal halide ballast are wired for parallel lamp operation.
† Pulse Start Metal Halide ballasts are supplied with extended range starter.
Maximum distance from starter to the lamp is 50 feet.
‡ High Pressure Sodium remote mounted indoor ballasts are designed for
mounting adjacent to the luminaire. To order consult factory.
∆ Two lamp 1000W Metal Halide ballast is supplied potted as standard.

Options
Description

Suffix

Potted Ballasts
- POT

For low noise requirements

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

AREA

Dimensions
“B”

“A”

8”

8”
22-1/2”

17 1/2”

FLOODLIGHTING

6 7/16”

“C”
8”

SPECIALTY

28-1/2”
6-7/16”

30

6-7/16”

Replacement Ballasts
Catalog
Number

Lamp
Watts

HIGHBAY

Lamp
Watts

Catalog
Number

Metal Halide
AB50MH-120∆
AB70MH-volts
AB100MH-volts
AB150MH-volts
AB175MH-volts

250W
400W
1000W
1500W

AB250MH-volts
AB400MH-volts
AB1000MH-volts
AB1500MH-volts

350W
400W
450W
875W
1000W
1500W

AB350MH-PSB-volts
AB400MH-PSB-volts
AB450MH-PSB-volts
AB875MH-PSB-volts
AB1000MH-PSB-volts
AB1500MH-PSB-volts

LOWBAY

50W
70W
100W
150W
175W

Pulse Start Metal Halide

Ballasts
Features
•Easy installation
•Energy saving
•High temperature rating
•UL and CSA certified
•Multi-voltage (on selected ballasts)
•Fits all AccuLite luminaires and most competitors HID
(Consult factory for dimensions)

AB50MH-PSB-120∆
AB70MH-PSB-volts
AB100MH-PSB-volts
AB150MH-PSB-volts
AB175MH-PSB-volts
AB250MH-PSB-volts
AB320MH-PSB-volts

High Pressure Sodium
35W
50W
70W
100W
150W
250W
400W
1000W

AB35HP-120∆
AB50HP-120∆
AB70HP-volts
AB100HP-volts
AB150HP-volts
AB250HP-volts
AB400HP-volts
AB1000HP-volts

PARKING & CANOPY

•Long life

50W
70W
100W
150W
175W
250W
320W

COMMERCIAL & RETAIL

Ballasts

High Pressure Sodium (Reactor)
HPF
NPF
HPF
NPF
HPF

AB35HP-120-R*
AB35HP-120-R-NP*
AB50HP-120-R*
AB50HP-120-R-NP*
AB70HP-120-R*

70W
100W
100W
150W
150W

NPF
HPF
NPF
HPF
NPF

AB70HP-120-R-NP*
AB100HP-120-R*
AB100HP-120-R-NP*
AB150HP-120-R*
AB150HP-120-R-NP*

SECURITY

35W
35W
50W
50W
70W

Voltage Suffix: “- QT” Quad Tap: 120V, 208V, 240V, 277V “- 480” 480V: change “-QT” to “-480”
* Available 120V only
∆ Also available 277V - change “-120” to “-277”

AREA

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Options
Description

Isolated Secondary Ballast
HPS Reactor Ballast

-IS
See Above
-PI

FLOODLIGHTING

Protected Igniter HPS only

Suffix

Potted Ballasts
-POT
Consult factory for availability of 875W, 1000W & 1500W

SPECIALTY
31

HIGHBAY

Count y Collection
Simcoe (10” Glass Pendant Luminaires)
Indoor Lighting of Retail Stores, Restaurants and Commercial Facilities

COMMERCIAL & RETAIL

LOWBAY

Lamp wattages up to 175W HID and 57W Compact Fluorescent for use with Remote Ballast or 300 W Incandescent

Simcoe
Glass

Simcoe
Glass

Open Top Housing

Closed Top Housing

Carleton (Glass, Acrylic and Aluminum Pendant Luminaires)
Indoor Lighting for Retail Stores, Atria, Concourses, Banks, and Commercial Facilities

PARKING & CANOPY

Lamp wattages up to 450W HID and 70W Compact Fluorescent for use with Remote Ballast or 300 W Incandescent

Carleton

Carleton

Carleton

Glass

Acrylic

Aluminum

SECURITY

Exeter (Glass, Acrylic and Aluminum Pendant Luminaires)
Indoor Lighting for Retail Stores, Atria, Concourses, Banks, and Commercial Facilities
Lamp wattages up to 100W HID and 42W Compact Fluorescent with Integral Ballast

AREA

450W HID and 70W Compact Fluorescent for use with Remote Ballast, or 300 W Incandescent

Exeter E2
Acrylic

FLOODLIGHTING

Exeter E1
Glass (Acrylic
and Aluminum also
available)

Exeter E2
Acrylic

Exeter E2
Aluminum

Remote Ballasts

SPECIALTY

Lamp wattages up to 450 Watts

RFB1
32

RFB2

RBR

Simcoe™

Decorative Luminaires with Glass Reflectors
HIGHBAY

To order, construct the catalog number as follows

S

OR

26PL

-G10

–(Options)

Simcoe
S

With glass reflector

SO

SC

Open Top Housing

Closed Top Housing – with ring

Open Top Housing
– with rods & ring

Open Top Housing
–with rods & louver

O
OL
OR
C
CL
CR

COMMERCIAL & RETAIL

SCR

LOWBAY

SOR

Housing Style
Open Top Housing
With glass reflector only
With ring & glass reflector
With rods ring & glass reflector
Closed Top Housing
With glass reflector only
With ring & glass reflector
With rods, ring & glass reflector
Watts
Pulse Start Metal Halide *§

S
County Collection Luminaire
Retro Look — Functional & Attractive
Functional
•Retro-look for applications with functional decor.
Mount
•Chain or stem.
Construction
•Steel housing.
Optics
•Prismatic borosilicate glass reflector.

•Ballast ordered separately.
Finish
•Standard - bright plate finish.

ED17
ED17
ED17
ED17

50PS§
70PS§
100PS§
150PS§

ED17

175MH§

Metal Halide * §
Medium Base

175W

Compact Fluorescent *
4 pin lamp
26W CFTR26W/GX24Q
32W CFTR32W/GX24Q
42W CFTR42W/GX24Q
57W CFTR57W/GX24Q
Incandescent

26PL
32PL
42PL
57PL

Medium Base

150W
300W

150IN
300IN

Type A
Type PS

Ballast – Ordered separately
Use RFB or RBR – See pages 40 - 43
Optics
Prismatic Glass Reflector

10”

SECURITY

Electrical
•Lamp: Max 150W pulse start metal halide, 175W
standard metal halide, 57W compact fluorescent, 300W
incandescent

50W
70W
100W
150W

PARKING & CANOPY

• Customize the look with color and accessories.

Medium Base

- G10

Options: See Below

•Optional - decorator colors.

*Ballast must be of a type suitable for remote operation of the lamp (ballast ordered separately). For recommended maximum distance
from lamp to ballast see pages 40 - 43.

AREA

§Open luminaires are furnished with a lampholder for protected lamp.

Dimensions
Options

Simcoe TM
Series

H

10-1/2”
12”
12”

11”
11-1/2”
11-1/2”

Description

Lamp

Suffix

Clear HID
Coated HID
Compact Fluorescent
Incandescent

-L
- CL
By Others
By Others

Louvers
For SOR & SCR models only Aluminum - V-(Color)
Housing Color
Brite-Plate Finish
Polyester powder coat

H

Standard
- GY
- WH
- BL
- BZ
Consult Factory

Louvers

Catalog No.

See Options

Hang Straight Pendant
Mounts on 4” octagonal box.
White canopy/white stem/hang straight mechanism/wire.
Designer colors – Specify (replace -WH with color).
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
“
36” Long H38-36-WH

SPECIALTY

Decorative Trim

Grey
White
Black
Bronze
Designer Colors

Description

FLOODLIGHTING

SO/SC
SOL/SOR
SCL/SCR

Dia

Accessories

Consult Factory

Dia

33

Decorative Luminaires with Glass Reflectors

HIGHBAY

Carleton™

To order, construct the catalog number as follows

C

Carleton
With Cast Housing

LOWBAY

–G22 –Options

C

1/2” hub
3/4” hub

Hub Size

75 250PS

50
75

Lamp

C

COMMERCIAL & RETAIL

With Glass Reflector

C
County Collection
Luminaire with Glass Reflector
Mount
•Chain or stem.

PARKING & CANOPY

Construction
•Cast aluminum housing.
•Reflector - borosilicate glass.

Optics
•16” & 22” prismatic glass reflectors.

Lamp
•Metal halide: 175 - 400W.

SECURITY

•Pulse start metal halide: 50 - 450W. Pulse Start technology
provides longer lamp life, more lumens per watt, better lumen
maintenance, superior color rendition, faster lamp warm up
and faster hot restrike.
•Compact fluorescent: 26 - 42W (max 8 lamps), 57W &
70W (max 4 lamps)

Pulse Start Metal Halide * § †
50W
ED17
70W
ED17
100W
ED17
150W
ED17
175W
ED28
200W
ED28
250W
ED28
320W
ED37
350W
ED37
400W
ED37
450W
ED37

- 50PS§
- 70PS§
- 100PS§
- 150PS§
- 175PS‡
- 200PS§
- 250PS§
- 320PS§
- 350PS§
- 400PS†
- 450PS§

Metal Halide * §
150W
175W
250W
400W

- 150MH§
- 175MH§
- 250MH§
- 400MH†

ED17
ED28
ED28
ED37

Compact Fluorescent *
4 pin lamp
26W
CFTR26W/GX24Q
32W
CFTR32W/GX24Q
42W
CFTR42W/GX24Q
57W
CFTR57W/GX24Q
70W
CFTR70W/GX24Q

- ◊26CF
- ◊32CF
- ◊42CF
- ◊57CF
- ◊70CF

Incandescent
Max 300W
Max 500W

- 300IN
- 500IN

Medium
Mogul

Ballast – Ordered separately
Use RFB or RBR – See pages 40 - 43

•Max 500W incandescent.
Optics

Electrical
•Ballast ordered separately.

Dia
16”
22”

Finish
•Housing - white polyester powder coat.

AREA
FLOODLIGHTING

Dimensions
Dia

H

-G16
-G22

15-3/8”
21-1/2”

18-1/8”
17/5/8”

Options

Accessories

Description

Lamp

Suffix

Clear HID - L
Coated HID - CL
Compact Fluorescent By Others
Incandescent By Others

Lampholder For Protected Lamp
(Order Lamp Separately)
Dia.

SPECIALTY

Suffix
-G16
- G22

3/4” Hub

H

- PLS

Decorative Trim
Includes bottom ring

- T-(color)

Decorative Bottom Ring

- B-(Color)

Glass Bottom Lens
Housing Color
Polyester Powder Coat
34

Max Lamp
450W HID / 70W CF / 500W Inc.
“

* Ballast must be of a type suitable for remote operation of the lamp † 400W MH: supplied with lampholder for standard lamp
(ballast ordered separately). For recommended maximum ◊ Indicate the number of lamps:
distance from lamp to ballast see pages 40 - 43.
16” reflectors: 1 lamp / luminaire – 26 - 57W
22” reflectors: 1, 2 or 4 lamps / luminaire – 26 - 70W,
§ Open luminaires are furnished with lampholder for protected lamp
6 or 8 lamps / luminaire – 26 - 42W
‡ Must use bottom closure, protected lamp not available

•Optional - decorator colors.

Model

Description
Borosilicate glass
“

Flat Glass - G
White Standard
Grey - GY
Black - BL
Bronze - BZ
Designer Colors Consult Factory

Description

Catalog No.

Louvers
Steel, white polyester powder coat
for 16” reflector LV16G-WH
for 22” reflector LV22G-WH
Hang Straight Pendant
Mounts on 4” octagonal box.
White canopy/white stem/hang straight mechanism/wire.
Designer colors – Specify (replace -WH with color).
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
“
36” Long H38-36-WH

Carleton™

Decorative Luminaires with Acr ylic Reflectors
HIGHBAY

To order, construct the catalog number as follows

C
Carleton
With Cast Housing

–A22 –Options

C
50
75

1/2” hub
3/4” hub

Hub Size

75 250PS

LOWBAY

Lamp

With Acrylic Reflector, Louver & Decorative

C
County Collection Luminaire
with Acrylic Reflector
Mount
•Chain or stem.
•Cast aluminum housing.
•Reflector - acrylic.

Optics
•16”, 22” & 25” acrylic reflectors.

Lamp
•Metal halide: 175 - 400W.

•Compact fluorescent: 26 - 42W (max 8 lamps), 57W &
70W (max 4 lamps)
•Max 500W incandescent.
•Ballast ordered separately.
•Housing - white polyester powder coat.

H

3/4” Hub

- O16W
- O22W
—

❶
✔
❶
✔

Open Bottom
Closed Bottom

—
—

—
—

—
—

✔
✘
✔
✔
✔
✔

- T16W
- T22W
- T25W

Accessories
Suffix

Clear HID - L
Coated HID - CL
Compact Fluorescent By Others
Incandescent By Others

Lampholder For Protected Lamp
(Order Lamp Separately)

- PLS

Decorative Trim
Includes bottom ring

- T-(color)

Glass Bottom Lens
Acrylic Bottom Lens
16” reflector – 250W Max
22” reflector – 400W Max

Housing Color
Polyester Powder Coat

Flat - G
Conical** - C
Dome** - D
Drop** - D
White Standard
Grey - GY
Black - BL
Bronze - BZ
Designer Colors Consult Factory

Description

Catalog No.

Louvers
Steel, white polyester powder coat
for 16” reflector LV16A-WH
for 22” reflector LV22A-WH
for 25” reflector LV25A-WH
Hang Straight Pendant
Mounts on 4” octagonal box.
White canopy/white stem/hang straight mechanism/wire.
Designer colors – Specify (replace -WH with color).
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
“
36” Long H38-36-WH
**Acrylic Lens Drop Lens - for 16” & 22” reflectors
Conical lens - 25” is “inverted conical”
Dome Lens - 12” reflector only
35

SPECIALTY

Open Bottom
Closed Bottom

❶
✔
❶
✔

Translucent

* Ballast must be of a type suitable for remote operation of the lamp † 400W MH: supplied with lampholder for standard lamp
(ballast ordered separately). For recommended maximum ◊ Indicate the number of lamps:
distance from lamp to ballast see pages 40 - 43.
16” reflectors: 1 lamp / luminaire – 26 - 57W
22” & 25” reflectors: 1, 2 or 4 lamps / luminaire – 26 - 70W,
§ Open luminaires are furnished with lampholder for protected lamp
6 or 8 lamps / luminaire – 26 - 42W
‡ Must use bottom closure, protected lamp not available

Lamp

❶
✔
✘
✘

25”

- A16
- A22
- A25

Description

Reflector Application Guide With Acrylic Parts (Ambient 25°C)
Dia.
Watts
100 175 250 400

22”

Optics - Acrylic

Options

Dia.

Open Bottom
Closed Bottom

Ballast – Ordered separately
Use RFB or RBR – See pages 40 - 43

FLOODLIGHTING

17-7/8”
20-1/2”
21-1/8”
H

16”

- 300IN
- 500IN

Medium
Mogul

AREA

Dimensions
16”
22”
25”

Incandescent
Max 300W
Max 500W

* White reflector, for other colors consult factory

•Optional - decorator colors.

-A16
-A22
-A25

- ◊26CF
- ◊32CF
- ◊42CF
- ◊57CF
- ◊70CF

16”
22”
25”

Finish

Dia

Compact Fluorescent *
4 pin (3 or 4 tube)
26W
CFTR26W/GX24Q
32W
CFTR32W/GX24Q
42W
CFTR42W/GX24Q
57W
CFTR57W/GX24Q
70W
CFTR70W/GX24Q

Consult “Reflector Application Guide” below for reflector suitability
Dia
Clear
Opaque

Electrical

Model

- 150MH§
- 175MH§
- 250MH§
- 400MH†

ED17
ED28
ED28
ED37

SECURITY

•Pulse start metal halide: 50 - 450W. Pulse Start technology
provides longer lamp life, more lumens per watt, better lumen
maintenance, superior color rendition, faster lamp warm up
and faster hot restrike.

Metal Halide * §
150W
175W
250W
400W

PARKING & CANOPY

Construction

- 50PS§
- 70PS§
- 100PS§
- 150PS§
- 175PS‡
- 200PS§
- 250PS§
- 320PS§
- 350PS§
- 400PS†
- 450PS§

COMMERCIAL & RETAIL

C

Pulse Start Metal Halide * § †
50W
ED17
70W
ED17
100W
ED17
150W
ED17
175W
ED28
200W
ED28
250W
ED28
320W
ED37
350W
ED37
400W
ED37
450W
ED37

Decorative Luminaires with Aluminum Reflectors

HIGHBAY

Carleton™

To order, construct the catalog number as follows

C 75 250PS
Carleton
With Cast Housing

LOWBAY

Hub Size

–S22

–Options

C

1/2” hub
3/4” hub

50
75

Lamp

C

COMMERCIAL & RETAIL

With spun aluminum reflector

C
County Collection Luminaire
with Spun Aluminum Reflector

PARKING & CANOPY

Mount
•Chain or stem.

Construction
•Cast aluminum housing.
•Reflector - anodized aluminum.

Optics
•16”, 18” & 22” spun aluminum reflectors.

Lamp
•Metal halide: 175 - 400W.

SECURITY

•Pulse start metal halide: 50 - 450W. Pulse Start technology
provides longer lamp life, more lumens per watt, better lumen
maintenance, superior color rendition, faster lamp warm up
and faster hot restrike.
•Compact fluorescent: 26 - 42W (max 8 lamps), 57W &
70W max 4 lamps)

- 50PS§
- 70PS§
- 100PS§
- 150PS§
- 175PS‡
- 200PS§
- 250PS§
- 320PS§
- 350PS§
- 400PS†
- 450PS§

Metal Halide * §
150W
175W
250W
400W

- 150MH§
- 175MH§
- 250MH§
- 400MH†

Electrical
•Ballast ordered separately.

Finish

ED17
ED28
ED28
ED37

Compact Fluorescent *
4 pin lamp
26W
CFTR26W/GX24Q
32W
CFTR32W/GX24Q
42W
CFTR42W/GX24Q
57W
CFTR57W/GX24Q
70W
CFTR70W/GX24Q

- ◊26CF
- ◊32CF
- ◊42CF
- ◊57CF
- ◊70CF

Incandescent
Max 300W
Max 500W

- 300IN
- 500IN

Medium
Mogul

Ballast – Ordered separately
Use RFB or RBR – See pages 40 - 43
Optics
Dia
16”
18”
22”

•Max 500W incandescent.

AREA

Pulse Start Metal Halide * § †
50W
ED17
70W
ED17
100W
ED17
150W
ED17
175W
ED28
200W
ED28
250W
ED28
320W
ED37
350W
ED37
400W
ED37
450W
ED37

Description
Aluminum
Aluminum (Semi-Faceted)
Aluminum

Max Lamp
450W HID / 70W CF / 500W Inc.
“
“

Suffix
-S16
-S18
-S22

* Ballast must be of a type suitable for remote operation of the
lamp (ballast ordered separately). For recommended
maximum distance from lamp to ballast see pages 40 - 43.

† 400W MH: supplied with lampholder for standard lamp
◊ Indicate the number of lamps:
16” & 18” reflectors: 1, 2, or 4 lamps / luminaire – 26 - 70W
22” reflectors: 1, 2 or 4 lamps / luminaire – 26 - 70W,
§ Open luminaires are furnished with lampholder for protected lamp
6 or 8 lamps / luminaire – 26 - 42W
‡ Must use bottom closure, protected lamp not available

•Housing - white polyester powder coat.
•Optional - decorator colors.

Options
FLOODLIGHTING

Dimensions

Description

Model

Dia

H

-S16
-S18
-S22

16-1/8”
18-5/8”
22-1/4”

17-7/8”
17-1/4”
19-5/8”

3/4” Hub

Lamp

Clear HID
Coated HID
Compact Fluorescent
Incandescent

Louver - Circular
use with all lamps listed

-L
- CL
By Others
By Others

See Accessories

Louver - Cross Baffle Factory Installed - X-color
H.I.D. - use ED17 or ED28 lamp
Compact Fluorescent - max 42W lamp

H

SPECIALTY

Suffix

Description

Suffix

Lampholder For Protected Lamp
(Order Lamp Separately)
Glass Bottom Lens
Housing Color
Polyester Powder Coat

- PLS

Flat - G
White
Grey
Black
Bronze
Designer Colors

Standard
-GY
-BL
-BZ
Consult Factory

Reflector Color
Anodized Standard
To order reflector with the same
color as the housing
-R

Accessories
Description
Dia.

36

Catalog No.

Louvers
Steel, white polyester power coat
for 16” reflector LV16S-S
for 18” reflector LV18S-S
for 22” reflector LV22S-S

Description

Catalog No.

Hang Straight Pendant White canopy/white stem/hang straight mechanism
Mounts on 4” octagonal box.
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
Designer colors – Consult Factory
“
36” Long H38-36-WH

Exeter™

Decorative Luminaires with Glass Reflectors

NEW

E2 –250PS Ballast –G16 –Color –Options

HIGHBAY

To order, construct the catalog number as follows

Exeter
Small Housing - Stem 3/8” 10” reflector E1
Large Housing - Hub 3/4” All reflectors E2

LOWBAY

Lamp
Metal Halide Lamp § †
Pulse Start
Probe Start
Metal Halide Metal Halide

E2
With Glass Reflector

E1 / E2
County Collection Luminaire
with Glass Reflector
Mount
•Stem: E1 - 3/8”; E2 - 3/8”, 1/2” & 3/4”
•Housing - extruded aluminum.
•Reflector - borosilicate glass.

Optics
•10”, 16” & 22” prismatic glass reflectors.

PARKING & CANOPY

Construction

COMMERCIAL & RETAIL

50W ED17
- 50PS §
–
70W ED17
- 70PS §
–
100W ED17 - 100PS §
–
150W ED17 - 150PS §
–
175W ED28 - 175PS ‡ - 175MH §
200W ED28 - 200PS §
–
250W ED28 - 250PS § - 250MH §
320W ED37 - 320PS §
–
350W ED37 - 350PS §
–
400W ED37 - 400PS † - 400MH †
450W ED37 - 450PS §
–
Compact Fluorescent ◊ *
4 pin lamp
26W
CFTR26W/GX24Q - ◊ 26CF
32W
CFTR32W/GX24Q - ◊ 32CF
42W
CFTR42W/GX24Q - ◊ 42CF
57W
CFTR57W/GX24Q - ◊ 57CF
70W
CFTR70W/GX24Q - ◊ 70CF
Incandescent
Max 150W
Medium, Type A
- 150IN
Max 300W Medium, Type PS
- 300IN
Max 500W
Mogul
- 500IN

Electrical
•Metal halide: 175 - 400W.

•Compact fluorescent: 26 - 42W (max 8 lamps), 57W &
70W (max 4 lamps)

Remote Ballast *
Available with all Exeter models, order remote ballast separatelyNo suffix
Use RFB or RBR – See pages 40 - 43

Integral Ballast
Available – E2 Series Exeter - Electronic Ballast

120 thru 277V - UN

H.I.D: 1 lamp 50W, 70W or 100W
CF: 1, 2 or 4 lamps - 26W, 32W or 42W

SECURITY

•Pulse start metal halide: 50 - 450W. Pulse Start technology
provides longer lamp life, more lumens per watt, better lumen
maintenance, superior color rendition, faster lamp warm up
and faster hot restrike.

347V - E34

Optics – Borosilicate Glass

•Max 500W incandescent.
•Remote ballast – ordered separately.
•Integral ballast – E2 series only electronic -- max 4 X 42W
compact fluorescent, 100W pulse start metal halide.

Finish

Model
E1 & E2
“
“

Max Lamp
100W HID / 57W CF / 150W Inc.
450W HID / 70W CF / 500W Inc.
“
White
Silver
Other color combinations

Housing Color

•Optional - decorator colors.

Suffix
- G10
- G16
- G22
No Suffix
- SR
See Options

AREA

•Housing - standard colors are white or silver.

Dia
10”
16”
22”

◊ Indicate the number of compact fluorescent lamps:
10” reflectors: 1 lamp / luminaire – 26 - 57W
§ Open luminaires are furnished with lampholder for protected lamp
16” reflectors: 1, 2, or 4 lamps / luminaire – 26 - 70W
‡ Must use bottom closure, protected lamp not available
22” reflectors: 1, 2 or 4 lamps / luminaire – 26 - 70W,
6 or 8 lamps / luminaire – 26 - 42W
† 400W MH: supplied with lampholder for standard lamp
* Maximum distance from lamp to ballast – See ages 40 - 43.

Dimensions
Dia

H

10-1/2”
15-3/8”
21-1/2”

10-3/8”
19-3/4”
19”

3/4” Hub

Options
E1
E2
“

-G10
-G16
-G22

Accessories

Description

Lamp
H

Suffix

Clear HID - L
Coated HID - CL
Compact Fluorescent By Others
Incandescent By Others

Lampholder For Protected Lamp
(Order Lamp Separately)

- PLS

Decorative Trim
Includes bottom ring

- T-(color)

Decorative Bottom Ring
Glass Bottom Lens
Housing Color
Polyester Powder Coat

- B-(Color)
Flat Glass - G

Description

Catalog No.

Louvers
Steel, white polyester power coat
for 16” reflector LV16G-WH
for 22” reflector LV22G-WH
Hang Straight Pendant
Mounts on 4” octagonal box.
White canopy/white stem/hang straight mechanism/wire.
Designer colors – Specify (replace -WH with color).
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
“
36” Long H38-36-WH

Black - BL
Bronze - BZ
Designer Colors Consult Factory

37

SPECIALTY

Dia.

FLOODLIGHTING

Model

NEW

Exeter™

HIGHBAY

Decorative Luminaires with Acr ylic Reflectors
To order, construct the catalog number as follows

E2 –250PS –Ballast –A22 –Color –Options
Exeter
Small Housing - Stem 3/8”
Large Housing - Hub 3/4”

10” reflector E1
All reflectors E2

LOWBAY

Lamp
Metal Halide Lamp § †
Pulse Start
Probe Start
Metal Halide Metal Halide

COMMERCIAL & RETAIL

E1

50W ED17
- 50PS §
–
70W ED17
- 70PS §
–
100W ED17 - 100PS §
–
150W ED17 - 150PS §
–
175W ED28 - 175PS ‡ - 175MH §
200W ED28 - 200PS §
–
250W ED28 - 250PS § - 250MH §
320W ED37 - 320PS §
–
350W ED37 - 350PS §
–
400W ED37 - 400PS † - 400MH †
450W ED37 - 450PS §
–
Compact Fluorescent ◊ *
4 pin lamp
26W
CFTR26W/GX24Q - ◊ 26CF
32W
CFTR32W/GX24Q - ◊ 32CF
42W
CFTR42W/GX24Q - ◊ 42CF
57W
CFTR57W/GX24Q - ◊ 57CF
70W
CFTR70W/GX24Q - ◊ 70CF
Incandescent
Max 150W
Medium, Type A
- 150IN
Max 300W Medium, Type PS
- 300IN
Max 500W
Mogul
- 500IN

E2

12” Opaque White Reflector

25” Clear Reflector

E1 / E2
County Collection Luminaire
with Acrylic Reflector
Mount
•Stem: E1 - 3/8”; E2 - 3/8”, 1/2” & 3/4”

PARKING & CANOPY

Construction
•Housing - extruded aluminum.
•Reflector - borosilicate glass.

Optics
•12”, 16”, 18” & 22” prismatic acrylic reflectors.

Electrical
•Metal halide: 175 - 400W.

Use RFB or RBR – See pages 40 - 43

SECURITY

•Pulse start metal halide: 50 - 450W. Pulse Start technology
provides longer lamp life, more lumens per watt, better lumen
maintenance, superior color rendition, faster lamp warm up
and faster hot restrike.
•Compact fluorescent: 26 - 42W (max 8 lamps), 57W &
70W (max 4 lamps)
•Max 500W incandescent.
•Remote ballast – ordered separately.
•Integral ballast – E2 series only electronic -- max 4 X 42W
compact fluorescent, 100W pulse start metal halide.

Finish
•Housing - white polyester powder coat.

AREA

Remote Ballast *
Available with all Exeter models, order remote ballast separatelyNo suffix
Integral Ballast
Available – E2 Series Exeter - Electronic Ballast

FLOODLIGHTING

Model

Optics - Acrylic

12”
16”
22”
25”

E1 & E2
E2
E2
E2

H

E1

-A12

12-3/8”

12-1/4”

E2
“
“

-A16
-A22
-A25

16”
22”
25”

19-1/2”
21-3/4”
22-5/8”

3/4” Hub

SPECIALTY
38

22”

Open Bottom
Closed Bottom

❶
✔
❶
✔
✘
✘

25”

Open Bottom
Closed Bottom

—
—

Open Bottom
Closed Bottom

White
Silver
Other color combinations

§ Open luminaires are furnished with lampholder for protected lamp
‡ Must use bottom closure, protected lamp not available
† 400W MH fixtures are supplied with lampholder for standard
lamp – to order for protected lamp add suffix “-PLS”

H

Options

Opaque

Translucent

- O12W*
- O16W*
- O22W*
–

- T12W*
- T16W*
- T22W*
-T25W*

No Suffix
- SR
See Options
◊ Indicate the number of compact fluorescent lamps:
12” reflectors: 1 lamp / luminaire – 26 - 57W
16” reflectors: 1, 2, or 4 lamps / luminaire – 26 - 70W
22” & 25” reflectors: 1, 2 or 4 lamps / luminaire – 26 - 70W,
6 or 8 lamps / luminaire – 26 - 42W

Accessories

Description

Lamp

Reflector Application Guide With Acrylic Parts (Ambient 25°C)
Dia.
Watts
100 175 250 400

16”

A12
A16
A22
A25

* White reflector, for other colors consult factory

Housing Color

Dia.

Open Bottom
Closed Bottom

-

* Maximum distance from lamp to ballast – See ages 40 - 43.

Dia

12”

347V - E34

Consult “Reflector Application Guide” below for reflector suitability
Dia
Model
Clear

•Optional - decorator colors.

Dimensions

120 thru 277V - UN

H.I.D: 1 lamp 50W, 70W or 100W
CF: 1, 2 or 4 lamps - 26W, 32W or 42W

Suffix

Clear HID - L
Coated HID - CL
Compact Fluorescent By Others
Incandescent By Others

❶
✘
❶
✔
❶
✔

—
—

—
—

Decorative Trim
Includes bottom ring

❶
✔
❶
✔

Glass Bottom Lens

—
—

—
—

✔
✘
✔
✔
✔
✔

- T-(color)
Flat - G

Acrylic Bottom Lens
16” reflector – 250W Max
22” reflector – 400W Max

Housing Color
Polyester Powder Coat

Conical** - C
Dome** - D
Drop** - D

Black - BL
Bronze - BZ
Designer Colors Consult Factory

Description

Catalog No.

Louvers
Steel, white polyester power coat
for 16” reflector LV16A-WH
for 22” reflector LV22A-WH
for 25” reflector LV25A-WH
Hang Straight Pendant
Mounts on 4” octagonal box.
White canopy/white stem/hang straight mechanism/wire.
Designer colors – Specify (replace -WH with color).
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
“
36” Long H38-36-WH
**Acrylic Lens Drop Lens - for 16” & 22” reflectors
Conical lens - 25” is “inverted conical”
Dome Lens - 12” reflector only

Exeter™

NEW

Decorative Luminaires with Aluminum Reflectors

E2 –250PS Ballast –S22 –Color –Options
Exeter
Small Housing - Stem 3/8”
Large Housing - Hub 3/4”

HIGHBAY

To order, construct the catalog number as follows

10” reflector E1
All reflectors E2

Lamp
Metal Halide Lamp § †

E1 / E2
County Collection Luminaire
with Aluminum Reflector
•Stem: E1 - 3/8”; E2 - 3/8”, 1/2” & 3/4”

Construction
•Housing - extruded aluminum.

–
–
–
–
- 175MH §
–
- 250MH §
–
–
- 400MH †
–
- ◊ 26CF
- ◊ 32CF
- ◊ 42CF
- ◊ 57CF
- ◊ 70CF

PARKING & CANOPY

Mount

50W
ED17
- 50PS §
70W
ED17
- 70PS §
100W
ED17
- 100PS §
150W
ED17
- 150PS §
175W
ED28
- 175PS ‡
200W
ED28
- 200PS §
250W
ED28
- 250PS §
320W
ED37
- 320PS §
350W
ED37
- 350PS §
400W
ED37
- 400PS †
450W
ED37
- 450PS §
Compact Fluorescent ◊ *
4 pin lamp
26W
CFTR26W/GX24Q
32W
CFTR32W/GX24Q
42W
CFTR42W/GX24Q
57W
CFTR57W/GX24Q
70W
CFTR70W/GX24Q
Incandescent
Max 150W
Medium, Type A
Max 300W
Medium, Type PS
Max 500W
Mogul

COMMERCIAL & RETAIL

With 16” Aluminum Reflector

Probe Start
Metal Halide

LOWBAY

E2

Pulse Start
Metal Halide

- 150IN
- 300IN
- 500IN

•Reflector - borosilicate glass.
Remote Ballast *
Available with all Exeter models, order remote ballast separatelyNo suffix

Optics
•10”, 16” & 22” aluminum reflectors.

Use RFB or RBR – See pages 40 - 43

Electrical

Integral Ballast
Available – E2 Series Exeter - Electronic Ballast

•Metal halide: 175 - 400W.

•Compact fluorescent: 26 - 42W (max 8 lamps), 57W &
70W (max 4 lamps)
•Max 500W incandescent.
•Remote ballast – ordered separately.

Finish
•Housing - standard colors are white or silver.
•Optional - decorator colors.

347V - E34

Optics
Dia

Model

Clear

12”
16”
18”
22”

E1 & E2
E2
E2
E2

100W HID / 57W CF / 150W Inc.
450W HID / 70W CF / 500W Inc.
“
“
White
Silver
Other color combinations

Housing Color

- S12
- S16
- S18
- S22

No Suffix
- SR
See Options

AREA

•Integral ballast – E2 series only electronic -- max 4 X 42W
compact fluorescent, 100W pulse start metal halide.

120 thru 277V - UN

H.I.D: 1 lamp 50W, 70W or 100W
CF: 1, 2 or 4 lamps - 26W, 32W or 42W

SECURITY

•Pulse start metal halide: 50 - 450W. Pulse Start technology
provides longer lamp life, more lumens per watt, better lumen
maintenance, superior color rendition, faster lamp warm up
and faster hot restrike.

◊ Indicate the number of compact fluorescent lamps:
* Maximum distance from lamp to ballast – See ages 40 - 43.
12” reflectors: 1 lamp / luminaire – 26 - 57W
§ Open luminaires are furnished with lampholder for protected lamp
16” & 18” reflectors: 1, 2, or 4 lamps / luminaire – 26 - 70W
‡ Must use bottom closure, protected lamp not available
22” reflectors: 1, 2 or 4 lamps / luminaire – 26 - 70W,
† 400W MH: supplied with lampholder for standard lamp
6 or 8 lamps / luminaire – 26 - 42W

Options

Dimensions
Model

Dia

H

12-3/8”

12-1/4”

E2 - S16
“ - S18
“ - S22

16-1/8”
18-5/8”
22-1/4”

19-1/2”
18-3/4”
22-1/4”

Suffix

Lamp

Clear HID
Coated HID
Compact Fluorescent
Incandescent

Louver - Circular
use with all lamps listed

-L
- CL
By Others
By Others

See Accessories

Louver - Cross Baffle Factory Installed - X-color
H.I.D. - use ED17 or ED28 lamp
Compact Fluorescent - max 42W lamp

Accessories
Description
H

Catalog No.

Louvers
Steel, white polyester power coat
for 16” reflector LV16S-S
for 18” reflector LV18S-S
for 22” reflector LV22S-S
Dia.

Description

Description

Suffix

Lampholder For Protected Lamp
(Order Lamp Separately)

- PLS

Glass Bottom Lens

Flat - G

Housing Color
Polyester Powder Coat

Black - BL
Bronze - BZ
Designer Colors Consult Factory

Reflector Color

Anodized Standard

To order reflector with the same
color as the housing

-R

SPECIALTY

E1 - S12

3/4” Hub

Description

FLOODLIGHTING

* Consult ballast data for recommended maximum distance from lamp to ballast.
§ Open luminaires are furnished with a lampholder for protected lamp
‡ Must use bottom closure, protected lamp not available
† 400W MH fixtures are supplied with lampholder for standard lamp – to order for protected lamp add
suffix “-PLS”
◊ Indicate the number of lamps: 16” & 18” reflectors – 1, 2, or 4 lamps / luminaire – 26 - 70W
22” reflectors – 1, 2 or 4 lamps / luminaire – 26 - 70W,
6 or 8 lamps / luminaire – 26 - 42W

Catalog No.

Hang Straight Pendant White canopy/white stem/hang straight mechanism
Mounts on 4” octagonal box.
3/8” stem, 18” Long H38-18-WH
“
24” Long H38-24-WH
Designer colors – Consult Factory
“
36” Long H38-36-WH
39

HIGHBAY

RFB1 Indoor Remote Ballast
To order, construct the catalog number as follows

RFB1 142CF -UN -K
Remote Ballast
With spun housing

RFB1

Lamp

LOWBAY

Lamp
Watts

Max Distance
Suffix
Lamp to Ballast Indicate # of Lamps

Compact Fluorescent *
Electronic, 4 pin lamp
26W
10 feet *
32W
10 feet *
42W
10 feet *

COMMERCIAL & RETAIL

RFB1
Furnished with Stem

RFB1
Low Wattage Electronic Remote Ballast
Heavy Duty Construction
•Aluminum housing.

PARKING & CANOPY

•Steel mounting plate.

Volts
Electronic ballast
120V thru 277V - UN
Maximum 10 feet from lamp
347V - E34
Mounting
Ceiling
Mounts on 4” recessed junction box

•The ballast is offered with a 3/8” hang straight stem in
a choice of lengths. Order stem separately.

SECURITY

Finish
•White polyester powder coat finish.

-K

Fixture Suspension
Hang Straight Pendant
Flexible mounting of fixture to ballast, white finish, 10° Swivel
3/8” dia. stem - H3

Mounting
•Mount on a standard 4” junction box.
Fixture Suspension
•Fixtures are stem mounted through the ballast cover
plate.

- 126CF
- 132CF
- 142CF

Stem White finish

Options
Color

12”
18”
24”
36”

long
long
long
long

- 12
- 18
- 24
- 36

White Standard
Designer Colors Consult Factory

Compact Fluorescent Electronic Ballasts
•Single lamp ballast for 26W, 32W or 42W lamps.
•Electronic ballasts for use with four pin compact
fluorescent lamps.
•Available with single and multiple lamp ballasts.

AREA

Ballasts
•Minimum starting temperature – CF -18°C

Dimensions
“RFB1”
5-1/2”

FLOODLIGHTING

2-3/4”
Stem
Order separately
Minimum: 6 inches
Maximum: 9 feet

SPECIALTY

Luminaire
See luminaire data sheet
Illustrated – Simcoe

40

Specify
Stem Length

H3 -24 -Options

RFB2 Indoor Remote Ballast
HIGHBAY

To order, construct the catalog number as follows

RFB2 142CF -UN -K
Remote Ballast
With spun housing

H -318 -Options

RFB2

Lamp
Lamp
Watts

Max Distance
Lamp to Ballast

Suffix

LOWBAY

Pulse Start Metal Halide *
Electronic, Single lamp only
50W
10 feet *
70W
10 feet *
100W 10 feet *
150W 10 feet *

- 50PS
- 70PS
- 100PS
- 150PS

Lamp
Watts

RFB2
Low Wattage Electronic Remote Ballast
Heavy Duty Construction
•Aluminum housing.

Max Distance
Suffix
Lamp to Ballast Indicate # of Lamps

10 feet *
10 feet *
10 feet *
10 feet *
10 feet *

- ◊ 26CF
- ◊ 32CF
- ◊ 42CF
- † 57CF
- † 70CF

Mounting
•Mount on a standard 4” junction box.
Fixture Suspension
•Fixtures are stem mounted through the ballast cover
plate.
•Single lamp ballasts are offered with either a 3/8”
hang straight or a 3/4” rigid stem in a choice of
lengths. Order stem separately.

Finish
•White polyester powder coat finish.
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

•Available with single and multiple lamp ballasts.

Fixture Suspension
Rigid Pendant
Rigid mounting of fixture to ballast
3/4” dia. stem - R7
Hang Straight Pendant
Flexible mounting of fixture to ballast, 30° Swivel
3/8” dia. stem - H3
Stem White finish

Options
Color

12”
18”
24”
36”

long
long
long
long

- 12
- 18
- 24
- 36

White Standard
Designer Colors Consult Factory

AREA

Compact Fluorescent Lamps & Electronic Ballasts
•Electronic ballasts for use with four pin compact
fluorescent lamps.

-K

SECURITY

•Multiple lamp ballasts are offered with a 3/4” rigid
stem in a choice of lengths. Order stem separately.

Mounting
Ceiling
Mounts on 4” recessed junction box

PARKING & CANOPY

Volts
Electronic ballast
120V thru 277V - UN
Maximum 10 feet from lamp
347V - E34

•Steel mounting plate.

* Luminaires with electronic ballast – long range starter is not available.
◊ Replace symbol “◊” to indicate number of lamps (available for 1, 2, 4, 6 or 8 lamps)
† Replace symbol “†” to indicate number of lamps (available for 1, 2or 4 lamps)

-40°C.
-30°C
-18°C

FLOODLIGHTING

Ballasts
•Minimum starting temperature – PS
– MH
– CF

26W
32W
42W
57W
70W

COMMERCIAL & RETAIL

Compact Fluorescent *
Electronic, 4 pin lamp

RFB2
Furnished with Stem

Dimensions
“RFB2”

12”
3 - 1/32”
Specify
Stem Length

SPECIALTY

Stem
Order separately
Minimum: 8 inches
Maximum 9 feet
Luminaire
See luminaire data sheet
Illustrated – Carleton

41

HIGHBAY

RBR Indoor Remote Ballast
To order, construct the catalog number as follows

RBR 442CF -UN -K

LOWBAY

Remote Ballast
With cast housing

R7 -36 -Options

RBR

Lamp
Compact Fluorescent
Electronic, 4 pin lamp
Replace symbol “◊” to indicate number of lamps
(available for 1, 2, 4, 6 or 8 lamps)
Lamp
Watts

COMMERCIAL & RETAIL

RBR
Furnished with Stem

Max Distance
Suffix
Lamp to Ballast Indicate # of Lamps

26W
32W
42W

RBR
Electronic Compact Fluorescent
Remote Ballasts

10 feet *
“
“

◊ 26CF
◊ 32CF
◊ 42CF

Symbol “†” indicates number of lamps
(available for 1, 2 or 4 lamps)
57W
10 feet *
† 57CF
70W
“
† 70CF
H.I.D. Lamp
See next page

PARKING & CANOPY

Heavy Duty Construction
Volts
Electronic ballast
Maximum 10 feet from lamp

•Die cast aluminum housing.
•Heavy gauge cover plate.

120V thru 277V - UN
347V - E34

Mounting
•Ceiling – Surface Mount – Factory drilled, bolts directly to
the ceiling over a recessed junction box.
•“Quick Install” - Ceiling – Mount the adapter plate on a
standard 4” junction box, hang the ballast, wire and
close. Secures with a set single screw.

SECURITY

•Ceiling Side Entry – Two 3/4” side entries, one plug.

Ballast Mounting
Ceiling Quick Install Not for use on sloped ceiling
Mounts on 4” octagonal box - K
Surface Mount Bolts directly to the ceiling

-C

Side Entry Two 1/2” side entries

-S

Pendant Rigid Mount 3/4” top entry

-P

•Pendant – Rigid mount, 3/4” top entry.

Fixture Suspension
•Fixture can be mounted independently of the ballast or
mounted to the ballast through the cover plate.
•Fixtures mounted through the ballast cover plate can be
supplied with either a hang straight or rigid stem.

Finish

Fixture Suspension
Hang Straight Pendant
30° Swivel, 3/8” dia Suspends from ballast cover - H3
Rigid Pendant
3/4” dia., Suspends from ballast cover - R7
Remote Fixture
Fixture is suspended independently from ballast - E

•White polyester powder coat finish.

AREA

Compact Fluorescent Lamps & Electronic Ballasts
•Electronic ballasts for use with four pin compact
fluorescent lamps.
•Available with single and multiple lamp ballasts.

Ballasts
FLOODLIGHTING

•Minimum starting temperature – CF

-18°C

Stem
White finish

18” long -18
24” long -24
36” long -36

Not required for remote fixture (suffix ‘-E’)

Options
Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage
* Compact Fluorescent luminaires with electronic ballast
– Maximum distance, lamp to ballast is 10 feet. Long range starter is not available.

Dimensions
“RBR”

SPECIALTY

12 - 1/4”

4 - 1/4”
Specify
Stem Length

42

RBR

Indoor Remote Ballast
HIGHBAY

To order, construct the catalog number as follows

RBR 200PS -QT -LRS -K R7 -36 -Options
Remote Ballast
With cast housing

RBR

Lamp
Lamp
Watts

Probe Start Metal Halide
175W
§
250W
§

175MH
250MH

Compact Fluorescent
See previous page

Electronic & Magnetic
H.I.D. Remote Ballasts

Volts
See chart for availability and suffix

COMMERCIAL & RETAIL

50PS
70PS
100PS
150PS
175PS
200PS

RBR

•Die cast aluminum housing.
•Heavy gauge cover plate.

Ballast Mounting
Ceiling
Quick Install

Mounting
•Ceiling – Surface Mount – Factory drilled, bolts directly to
the ceiling over a recessed junction box.
•“Quick Install” - Ceiling – Mount the adapter plate on a
standard 4” junction box, hang the ballast, wire and
close. Secures with a set single screw.
•Ceiling Side Entry – Two 3/4” side entries, one plug.
Fixture Suspension
•Fixture can be mounted independently of the ballast or
mounted to the ballast through the cover plate.
•Fixtures mounted through the ballast cover plate can be
supplied with either a hang straight or rigid stem.

Finish

Not for use on sloped ceiling
Mounts on 4” octagonal box - K
Bolts directly to the ceiling - C

Side Entry
Pendant

Two 1/2” side entries - S

Rigid Mount

Fixture Suspension
Hang Straight Pendant
30° Swivel, 3/8” dia Suspends from ballast cover - H3
Rigid Pendant
3/4” dia., Suspends from ballast cover - R7
Remote Fixture
Fixture is suspended independently from ballast - E
Stem
White finish

•White polyester powder coat finish.

•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

Ballasts

Not required for remote fixture (suffix ‘-E’)

Options
Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

FLOODLIGHTING

-40°C.
-30°C

18” long -18
24” long -24
36” long -36

AREA

New Technology Pulse Start
Metal Halide Lamps & Ballasts

3/4” top entry - P

SECURITY

•Pendant – Rigid mount, 3/4” top entry.

Surface Mount

PARKING & CANOPY

Long Range Starter
Pulse Start - Magnetic ballast only max 50 feet from lamp - LRS

Heavy Duty Construction

•Minimum starting temperature – PS
– MH

Suffix

LOWBAY

RBR
Furnished with Stem

Max Distance - Lamp to Ballast *

Pulse Start Metal Halide
50W 2’ magnetic 10’ electronic
70W 15’magnetic 10’ electronic
100W 20’magnetic 10’ electronic
150W 10’magnetic 10’ electronic
175W 2’magnetic 10’ electronic
200W 2’magnetic 10’ electronic

† Pulse start luminaires with magnetic ballast – for distances beyond that listed above, use a long range starter.
* Pulse start luminaires with electronic ballast – Maximum distance, lamp to ballast is 10 feet. Long range starter is not
available.

Dimensions

§ Probe start luminaires with magnetic ballast – the lamp to ballast distance is determined by the wire size.

“RBR”

Primary Voltage Availability – Insert suffix below.

12 - 1/4”

4 - 1/4”
Specify
Stem Length

Electronic Ballast
Volts Suffix
120/208/240/277V - UN
347V - E34

50W 70W 100W
PS PS
PS
PS PS
PS

150W
–
–
PS
PS
PS

175W 200W 250W
–
–
–
–
–
–
PS
PS
MH
PS
PS
MH
PS/MH PS
MH

150W
PS
PS

175W 200W 250W
PS
–
–
–
–
–

SPECIALTY

Volts Suffix 50W 70W 100W
120V - 120 PS PS
–
277V - 277 PS PS
–
120/208/240/277V - QT
–
–
PS
120/277/347V - TT
–
–
PS
480V - 480 –
–
PS

Magnetic Ballast

43

HIGHBAY

Electronic H.I.D. Luminaires

General Indoor Downlighting

LOWBAY

Including Industrial, Commercial, Retail, Recreation and Sports
Accessories: Hi/Lo Dimming is standard
Best Product
Heavy duty die-cast aluminum ballast housing
COMMERCIAL & RETAIL

Medium wattage lamps – 320, 350 or 400 watt

Duralyte

Accuglass

Acculume

High

High Performance,

Lightweight

Performance,

Precision Molded

Molded

Low Brightness

Borosilicate Glass

Acrylic

Fully Faceted

Reflector

Reflector

PARKING & CANOPY

Reflector
• Up

to 20% more efficient vs.

• Glass

standard spun reflectors
• Low

glare maximizes visual

• Uplight

& Low Profile models

SECURITY

illuminates ceiling to

• 16”

and 22” glass reflectors

• Standard

& Low Profile models

• Uplight

• 12”,

16”, 22” and 25” reflectors

• Standard

Accuglo

• 15”

• 16”

• Standard

illuminates ceiling to

eliminate “cavern” effect

Econobay
and 16” Aluminum Reflectors

reflector for simplified

installation

eliminate “cavern” effect

and 22” fully faceted reflectors

• Standard

• Lightweight

not affected by UV deterioration

comfort/acuity
• 17”

reflector is inert and is

& Low Profile models

and 22” Aluminum Reflectors

with high reflectance white finish

& Low Profile models

& Low Profile models

AREA

• Standard

Heavy duty die-cast aluminum ballast housing

FLOODLIGHTING

Low wattage lamps – 50, 70, 100, 150 and 175 watt

Accuglass
• 10”

and 16” glass

SPECIALTY

reflectors

Acculume
• 12”,

16” and 22”

acrylic reflectors

Econobay
• 12”,

14” and 16”

acrylic reflectors

Accuglo
• 16”

Aluminum Reflector

with high reflectance
white finish

44

Duralyte™

NEW

Electronic, Medium Wattage, Faceted

HIGHBAY

To order, construct the catalog number as follows

EDL 400PS –U27 –17

Electronic Duralyte
Standard Profile EDL
Low Profile LPEDL
EDL

LPEDL

Standard Profile
- Faceted Aluminum

Low Profile - Faceted
Aluminum

–K

–PLS –Options

LOWBAY

Lamp Watts
Pulse Start Metal Halide
320W Mogul ED37 320PS *
350W
“
“
350PS *
400W
“
“
400PS
Ballast
Electronic - Variable Voltage
200V thru 277V, 50/60 Hz - U27†

Low Profile - Faceted Aluminum

COMMERCIAL & RETAIL

LPEDL
Optical Assembly
Fully Faceted Aluminum
17” nominal dia. - 17
22”
“
- 22

EDL, LPEDL
High Performance Electronic Luminaire
with Fully Faceted Optical Assembly

Luminaire Mounting
Pendant

3/4” hub

Ceiling – Quick-Install
Mounts on 3-1/2” or 4” junction box

No suffix
-K

PARKING & CANOPY

Improved Lumen Maintenance means Fewer
Luminaires per Installation
•Electronic ballasts improve lumen maintenance,
requiring fewer luminaires to maintain light levels.

Protected Lamp / Bottom Closure
Either a protected lamp or a bottom closure is required by Code for 320W & 350W
Optional for 400W

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Lampholder for Protected Lamp

Electronic Ballast
•Intelligent ballast for 200V thru 277V, 50/60Hz

Use protected (ANSI Type ‘O’) lamp - PLS

Bottom Closure Glass Lens Use with standard (ANSI Type ‘S:) lamp lamp - BC

•Multi-watt ballast, 320W, 350W or 400W. Preset at
the factory - field adjustable.

Options: See Below
† Voltage Suffix: “- U27” Suitable for 200 thru 277V, 50/60Hz When required by local certifying bodies, use Lamp Socket
Protector on line to line circuits. To order add suffix - LSP
* Must use a bottom closure or a protected lamp (See above)

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

Options

Accessories

Description

Lamp

•Low profile housing - extruded aluminum housing.
•Reflector - Fully faceted aluminum reflector ensures
highest luminaire performance allowing fewer fixtures
per installation vs. spun aluminum. Field adjustable,
eleven positions for better light control.

Suffix

Coated Lamp (Recommended) - CL
Clear Lamp - L

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

-Q

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Mounting
•Pendant or Quick-Install ceiling mount.

Enclosed Optical Assembly
Fully gasketed optical assembly

-EOA

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp
life, more lumens per watt, better lumen
maintenance, faster lamp warm up, faster hot
restrike and superior color rendition.

D

17-1/8”
23-3/4”

H (min)
21-3/8”
21-5/8”

21-3/8” 23-7/8”
21-5/8” 24-1/8”

23-7/8”
24-1/8”

Enclosed
Optical Assembly Reflector

D

3/4” Hub
17”
17-1/8”
22”
23-3/4”

H
D

Cord Set - 3’ long ∆
3 conductor, Type ST105
Cord & 15A, 277V Twist Lock Plug

Cord only 3C
3C-15TLP-277

Q-Deck Plate For quick mounting
(Mounting screws not included)
Wire Guard
Ballast Safety Chain
3’ long ∆

Q-DECK

For 17” reflector DL-17WG
For 22” reflector DL-22WG
Standard profile OR-BSC3
Low profile LPOR-BSC3

Optical Assembly Safety Cable

OR-RSC

Power Hook
Receptacle, hook and box
W
28-1/8”
30-7/8”

DL-SS
HBPH-volts

Dimming - Occupancy Sensors:
Detects infrared activity, with mounting bracket
Sensor mounting Maximum 8’
OS-8
8’ through 20’ OS-20
People 20’ through 35 OS-45
Large objects* 20’ through 45 OS-45
Dimming - Daylight Harvesting
Indoor Photosensor, with mounting bracket
Hi/Lo dimming

D
H (Max)

Male HK75SS
Female HF75SS

H
22-1/4”
22-1/2”

DH-1

SPECIALTY

3/4” Hub
17”
22”

H

D

H (min) H (Max)

H

Dimensions
Reflector

D

3/4” Hub
17”
17-1/8”
22”
23-3/4”

W

Low Temperature Starting
•Electronic ballasts are suitable for low
temperature starting, –30˚C (–20˚F)

Standard

Reflector

Safety Hook - 3/4”NPT

Top Shroud

Dimming
Standard - Order controls separately - see right

Low Profile

Catalog No.

FLOODLIGHTING

Enclosed Optical Assembly
•Optional, prevents dirt from accumulating on the inside of
the reflector.

Description

AREA

•Lampholder - specification grade porcelain.

Finish
•White polyester powder coat finish.

SECURITY

Control
•Depending on the controls selected, standard control
can be either continuous dimming or Hi/Lo switching.

Dimming - Control
0 – 10V
Slider dimming control DIM-0/10S
Accuflex Modular Wiring See page 28

45

NEW
HIGHBAY

AccuGlass™

Electronic, Low Wattage, Glass
To order, construct the catalog number as follows

OR 150PS –UN –10

–K

–PLS –Options

Electronic AccuGlass
Standard Profile OR

OR

10” dia. Glass

With 16” dia. Glass Reflector

COMMERCIAL & RETAIL

LOWBAY

OR

Ballast
Electronic - Variable Voltage
120V thru 277V, 50/60 Hz -UN †

OR

OR

10” dia. Glass, Bottom Ring

Quick Install

OR

PARKING & CANOPY

High Performance Electronic Luminaire
with Glass Optical Assembly
Fewer Luminaires per Installation
•Electronic ballasts improve lumen maintenance. Fewer
luminaires are required to maintain light levels.
•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.
Electronic Ballast
•Intelligent ballast for 120V thru 277V, 50/60Hz

SECURITY

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.
•Low Profile - extruded aluminum housing.
•Reflector - Borosilicate glass, precision molded prisms.
Unlike acrylic, glass is does not deteriorate when
exposed to ultra-violet light.

AREA

•Lampholder - specification grade porcelain.

FLOODLIGHTING

Luminaire Mounting
Ceiling
Quick-Install - Mounts on 3-1/2” or 4” junction box
Surface Mount - Drilled for bolting to the ceiling
With two 1/2” plugged side entries

Lampholder for Protected Lamp

Requires protected lamp - PLS

Options: See Below
† Voltage Suffix:“- UN” Suitable for 120 thru 277V, 50/60Hz
Consult local code for use on line to line circuits.
* Must use a bottom closure or a protected lamp (See “Options”)

Accessories

Lamp

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Dimensions
Standard

H

D

D2

H

10-1/4”

3/4” Hub
-G10

10-1/2”

12-1/2”

-G10R

12”

12-1/2”

10-1/4”

-G16

15-3/8”

12-1/2”

15-1/4”

Flexible Pendant - Add 2-1/2”
D1

Description

Suffix

Coated Lamp (Recommended) - CL
Clear Lamp - L

Description

Catalog No.

Safety Hook
Use with “Flexible Pendant” mounting only
- 3/4”NPT
Male HK75SS
Female HF75SS
Cord Set 3 conductor, 3’ long Type ST105
For lengths other than 3 feet, revise the 3
in the catalog number to the length
Cord only 3C
in feet.
Cord & 15A, 277V
Twist Lock Plug 3C-15TLP-277
Wire Guard

10” reflector Not available
16” reflector ACG-16WG

Ballast Safety Chain - 3’ long ∆
Power Hook
Receptacle, hook and box

OR-BSC3
HBPH-volts

HI/LO Dimming Systems See page 27
Reflector

D2

- CE

Protected Lamp
Protected Lamp is required by Code

•Step 2: Hang the luminaire on the “Quick Install” plate.
Connection is easy, the 80˚ hinge design provides
ample room to connect the three wires.

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

No suffix

Pendant
Rigid Mount - 3/4” hub, threads directly to the housing - PD
Flexible Mount - 3/4” hub, includes balancing junction box - PF

Options

Finish
•White polyester powder coat finish.

SPECIALTY

Optical Assembly
Borosilicate Glass
10” nominal dia. -G10
10“ (with bottom ring)
“
-G10R
16”
“
-G16

Three Step Quick-Install Mount
•Step 1: Open the box and mount the ‘Quick-Install’
plate on a standard 3-1/2” or 4” junction box.

•Step 3: Swing closed and secure the set screw.

46

Lamp Watts
Pulse Start Metal Halide
50W Mogul
ED17
50 *
70W
“
“
70 *
100W
“
“
100 *
150W
“
“
150 *

Accuflex Modular Wiring See page 28

AccuGlass™

NEW

Electronic, Medium Wattage, Glass

HIGHBAY

To order, construct the catalog number as follows

ECG 400PS –U27 – C

– K –PLS –Options

Electronic AccuGlass
Standard Profile ECG
Low Profile LPECG

LOWBAY

Lamp Watts
Pulse Start Metal Halide
320W Mogul ED37 320PS *
350W
“
“
350PS *
400W
“
“
400PS
Ballast
Electronic - Variable Voltage
200V thru 277V, 50/60 Hz -U27†
LPECG

Standard Profile - Glass

Low Profile - Glass

Optical Assembly
Fully Faceted Aluminum
16” nominal dia. - A
22”
“
-C

ECG, LPECG
High Performance Electronic Luminaire
with Glass Optical Assembly

Luminaire Mounting
Pendant

3/4” hub

Ceiling – Quick-Install
Mounts on 3-1/2” or 4” junction box

Lampholder for Protected Lamp

Use protected (ANSI Type ‘O’) lamp - PLS

Bottom Closure Glass Lens Use with standard (ANSI Type ‘S:) lamp lamp - BC

Electronic Ballast
•Intelligent ballast for 200V thru 277V, 50/60Hz

Options: See Below

•Multi-watt ballast, 320W, 350W or 400W. Preset at
the factory - field adjustable.

† Voltage Suffix: “- U27” Suitable for 200 thru 277V, 50/60Hz When required by local certifying bodies, use Lamp Socket
Protector on line to line circuits. To order add suffix - LSP
* Must use a bottom closure or a protected lamp (See above)

Options

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.
•Low profile housing - extruded aluminum housing.

•Lampholder - specification grade porcelain.
Mounting
•Pendant or Quick-Install ceiling mount.
Finish
•White polyester powder coat finish.

Suffix

Lamp

Coated Lamp (Recommended) - CL
Clear Lamp - L

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

-Q

- LSP

D

15-3/8”
21-1/2”

22-1/4”
21-1/2”

For 16” reflector ACG-16WG
For 22” reflector ACG-22WG

Ballast Safety Chain
3’ long ∆

Standard profile OR-BSC3
Low profile LPOR-BSC3

Optical Assembly Safety Cable

ACG-RSC

Top Shroud
Power Hook
Receptacle, hook and box

D

3/4” Hub
16”
15-3/8”
22”
21-1/2”

W

Q-DECK

H

W

17”
27-1/8”
16-1/4” 30-1/4”

ACG-SS
HBPH-volts

Dimming - Occupancy Sensors:
Detects infrared activity, with mounting bracket
Sensor mounting Maximum 8’
OS-8
8’ through 20’ OS-20
People 20’ through 35 OS-45
Large objects* 20’ through 45 OS-45
Dimming - Daylight Harvesting Hi/Lo dimming
Indoor Photosensor, with mounting bracket
DH-1

SPECIALTY

H

Q-Deck Plate For quick mounting
(Mounting screws not included)

Cord only 3C
3C-15TLP-277

FLOODLIGHTING

3/4” Hub
16”
22”

Cord Set
3’ long ∆, 3 conductor, Type ST105

Wire Guard

Dimensions
Reflector

Male HK75SS
Female HF75SS

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Low Profile

Safety Hook - 3/4”NPT

Cord & 15A, 277V Twist Lock Plug

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

H

Catalog No.

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Dimming
Standard - Order controls separately - see right

Low Temperature Starting
•Low temperature starting, –30˚C (–20˚F)

Description

AREA

•Reflector - Borosilicate glass, precision molded prisms.
Unlike acrylic, glass is does not deteriorate when
exposed to ultra-violet light.

Accessories

Description

Dimming - Control
0 – 10V Slider dimming control DIM-0/10S
Accuflex Modular Wiring See page 28

H
D

SECURITY

Control
•Depending on the controls selected, standard control
can be either continuous dimming or Hi/Lo switching.

D

-K

Protected Lamp / Bottom Closure
Either a protected lamp or a bottom closure is required by Code for 320W & 350W
Optional for 400W

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Reflector

No suffix

PARKING & CANOPY

Improved Lumen Maintenance means Fewer
Luminaires per Installation
•Electronic ballasts improve lumen maintenance,
requiring fewer luminaires to maintain light levels.

Standard

COMMERCIAL & RETAIL

ECG

47

Acculume™

Electronic, Low Wattage, Acr ylic

HIGHBAY

NEW

To order, construct the catalog number as follows

OR 150PS –UN –A16 – K

–PLS –Options

Electronic Acculume
Standard Profile OR

OR

12” dia. Acrylic

Quick Install

Lamp Watts
Pulse Start Metal Halide
50W Mogul
ED17
50 *
70W
“
“
70 *
100W
“
“
100 *
150W
“
“
150 *

LOWBAY

OR

Ballast
Electronic - Variable Voltage
120V thru 277V, 50/60 Hz -UN †

COMMERCIAL & RETAIL

OR
16” dia. Acrylic

Optical Assembly
Acrylic

OR

12” nominal dia.
16” “
22” “

PARKING & CANOPY

High Performance Electronic Luminaire
with Acrylic Optical Assembly

SECURITY

Opaque
White

-A12
-A16
-A22

-T12W
-T16W
-T22W

-O12W
-O16W
-O22W

No suffix
- CE

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Pendant
Rigid Mount - 3/4” hub, threads directly to the housing - PD
Flexible Mount - 3/4” hub, includes balancing junction box - PF

Electronic Ballast
•Intelligent ballast for 120V thru 277V, 50/60Hz

Protected Lamp
Protected Lamp or a Bottom Closure is required by Code

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

Lampholder for Protected Lamp
Bottom Closure Glass Lens

•Reflector - Up to 94% efficient, with excellent uplight
characteristics. Light weight, up top 5 kg (11 lbs.)
lighter than glass. Field adjustable, five positions for
better light control. Ten year limited warranty against
yellowing. Available with clear, translucent and
opaque finish.

Requires protected lamp - PLS
Use with standard lamp lamp
See Reflector Application Guide - BC

Options: See Below
† Voltage Suffix:“- UN”
Suitable for 120 thru 277V, 50/60Hz
Consult local code for use on line to line circuits.

•Specification grade porcelain lampholder.

* Must use a bottom closure or a protected
lamp (See “Options”)

Three Step Quick-Install Mount
•Step 1: Open the box and mount the ‘Quick-Install’
plate on a standard 3-1/2” or 4” junction box.

AREA

Translucent
White

Luminaire Mounting
Ceiling
Quick-Install - Mounts on 3-1/2” or 4” junction box
Surface Mount - Drilled for bolting to the ceiling
With two 1/2” plugged side entries

Fewer Luminaires per Installation
•Electronic ballasts improve lumen maintenance. Fewer
luminaires are required to maintain light levels.

•Step 2: Hang the luminaire on the “Quick Install” plate.
Connection is easy, the 80˚ hinge design provides
ample room to connect the three wires.

Reflector Application Guide*
❶ Available, requires protected lamp
lampholder & protected lamp
✔ Available with indicated wattage
✘ NOT available
* With Acrylic Parts Ambient 25°C

Options

Finish
•White polyester powder coat finish.

Suffix

Coated Lamp (Recommended) - CL
Clear Lamp - L

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

SPECIALTY

Reflector

H

D

D2

D1

H

3/4” Hub
12” Nom Dia 12-7/16”

12-1/2”

11-3/4”

16” Nom Dia

16”

12-1/2”

15-3/8”

22” Nom Dia

22”

12-1/2”

15-3/8”

Flexible Pendant - Add 2-1/2”
48

❶
✘
❶
✔
❶
✔

Description

Catalog No.

Cord Set 3 conductor, 3’ long Type ST105
For lengths other than 3 feet, revise the 3
in the catalog number to the length
Cord only 3C
in feet.
Cord & 15A, 277V
Twist Lock Plug 3C-15TLP-277
Wire Guard

D2

❶
✔
❶
✔
❶
✔

Safety Hook
Use with “Flexible Pendant” mounting only
- 3/4”NPT
Male HK75SS
Female HF75SS

Dimensions
Standard

100W 150W

12” Open bottom
Closed bottom
16” Open bottom
Closed Bottom
22” Open bottom
Closed Bottom

Accessories

Description

Lamp

•Step 3: Swing closed and secure the set screw.

FLOODLIGHTING

Clear

For 12” reflector Not available
For 16” reflector PR-16WG
For 22” reflector PR-22WG

Ballast Safety Chain - 3’ long ∆
Power Hook
Receptacle, hook and box

OR-BSC3
HBPH-volts

HI/LO Dimming Systems See page 27
Accuflex Modular Wiring See page 28

Acculume™

NEW

Electronic Electronic, Medium Wattage, Acr ylic

HIGHBAY

To order, construct the catalog number as follows

EHB 400PS –U27 –A16 – K –PLS

Electronic Acculume
Standard Profile EHB
Low Profile LPEHB

–Options

For 1000W

LOWBAY

Lamp Watts
Pulse Start Metal Halide
320W Mogul ED37 320PS *
350W
“
“
350PS *
400W
“
“
400PS

HB5

Ballast
Electronic - Variable Voltage
200V thru 277V, 50/60 Hz -U27†
LPEHB

EHB

Standard Profile - Acrylic

Low Profile - Acrylic

EHB , LPEHB
High Performance Electronic Luminaire
with Acrylic Optical Assembly

Translucent
White

Opaque
White

-A16
-A22
-A25

-T16W
-T22W
-T25W

-O16W
-O2 2W
-O25W

Luminaire Mounting
Pendant

3/4” hub

Ceiling – Quick-Install
Mounts on 3-1/2” or 4” junction box

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Lampholder for Protected Lamp

Use protected (ANSI Type ‘O’) lamp - PLS

Bottom Closure Glass Lens Use with standard (ANSI Type ‘S:) lamp lamp - BC

•Multi-watt ballast, 320W, 350W or 400W. Preset at
the factory - field adjustable.

Options: See Below
Reflector Application Guide
† Voltage Suffix: “- U27” Suitable for 200 thru 277V,
50/60Hz When required by local certifying bodies, use Lamp Socket
Dia.
16”
Protector on line to line circuits. To order add suffix - LSP
Open bottom
✔
* Must use a bottom closure or a protected lamp (See above)
Closed Bottom
✘

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

Options

•Low profile housing - extruded aluminum housing.

.Lamp

Suffix

Coated Lamp (Recommended) - CL
Clear Lamp - L
-Q

Dimming
Standard - Order controls separately - see right

Accessories

Finish
•White polyester powder coat finish.

Safety Hook - 3/4”NPT

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

Cord Set
3’ long ∆, 3 conductor, Type ST105
Cord only 3C
Cord & 15A, 277V Twist Lock Plug 3C-15TLP-277

Description

Dimensions

D

D
Low Profile
W
H

D

20-7/8”
23-1/8”
23-5/8”

H (min)

3/4” Hub
16” 15-5/8”
22” 17-7/8”
25” 18-3/8”

H (Max)
22-7/8”
25-1/8”
25-5/8”

H (Max)

W

17-5/8” 27-1/2”
19-7/8” 30-1/2”
20-3/8”
32”

Q-Deck Plate For quick mounting
Q-DECK
(Mounting screws not included)
Bottom Closure
See Reflector Application Guide on Left for Max Watt
Drop
Conical
Flat
Wire Guard

16”
PR-16DL
PR-16CL
PR-16BL

22”
PR-22DL
PR-22CL
PR-22BL

16”
PR-16WG

22”
PR-22WG

Power Hook
Receptacle, hook and box

25”

–
PR-25CL

–
25”
PR-25WG

HBPH-volts

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Description

Catalog No.

Optical Assembly Safety Cable
Ballast Safety Chain
- 3’ long ∆

OR-RSC

Standard profile OR-BSC3
Low profile LPOR-BSC3

Top Shroud

DL-SS

Dimming - Occupancy Sensors:
Detects infrared activity, with mounting bracket
Sensor mounting Maximum 8’
OS-8
8’ through 20’ OS-20
People 20’ through 35 OS-45
Large objects* 20’ through 45 OS-45
Dimming - Daylight Harvesting Hi/Lo dimming
Indoor Photosensor, with mounting bracket
DH-1

SPECIALTY

H

D

H (min)

3/4” Hub
16”
22”
25”

Catalog No.

Male HK75SS
Female HF75SS

Suffix

FLOODLIGHTING

Mounting
•Pendant or Quick-Install ceiling mount.

Description

AREA

Quartz Auxiliary
Double contact bayonet base, lamp not included

•Lampholder - specification grade porcelain.

25”
✔
✔

With acrylic parts, ambient 25˚C ✔ Available ✘ Not Available

Description

•Reflector - Up to 94% efficient, with excellent uplight
characteristics. Light weight, up top 5 kg (11 lbs.)
lighter than glass. Field adjustable, five positions for
better light control. Ten year limited warranty against
yellowing. Available with clear, translucent and
opaque finish.

22”
✔
✔

SECURITY

Control
•Depending on the controls selected, standard control
can be either continuous dimming or Hi/Lo switching.

Standard

-K

Protected Lamp / Bottom Closure
Either a protected lamp or a bottom closure is required by Code for 320W & 350W
Optional for 400W

Electronic Ballast
•Intelligent ballast for 200V thru 277V, 50/60Hz

Low
Temperature
Starting
•Low
temperature
starting, –30˚C
(–20˚F)

No suffix

PARKING & CANOPY

Improved Lumen Maintenance means Fewer
Luminaires per Installation
•Electronic ballasts improve lumen maintenance,
requiring fewer luminaires to maintain light levels.

16” nominal dia.
22”
“
25”
“

Clear

COMMERCIAL & RETAIL

Optical Assembly
Acrylic

Dimming - Control
0 – 10V Slider dimming control DIM-0/10S
Accuflex Modular Wiring See page 28

49

NEW

Electronic, Low Wattage, Aluminum

HIGHBAY

Econobay™

To order, construct the catalog number as follows

OR 150PS –UN –10

–K

–PLS –Options

Electronic Econobay
Standard Profile OR

LOWBAY

Lamp Watts
Pulse Start Metal Halide
50W Mogul
ED17
50 *
70W
“
“
70 *
100W
“
“
100 *
150W
“
“
150 *
Ballast
Electronic - Variable Voltage
120V thru 277V, 50/60 Hz -UN †

COMMERCIAL & RETAIL

OR
16” dia. Spun Aluminum

Optical Assembly
Spun Aluminum 12-3/8” dia.
14-3/4” dia.
16-1/8” dia.

OR

PARKING & CANOPY

High Performance Electronic Luminaire
with Aluminum Optical Assembly
Fewer Luminaires per Installation
•Electronic ballasts improve lumen maintenance. Fewer
luminaires are required to maintain light levels.
•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.
Electronic Ballast
•Intelligent ballast for 120V thru 277V, 50/60Hz

SECURITY

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

AREA

- CE

Pendant
Rigid Mount - 3/4” hub, threads directly to the housing - PD
Flexible Mount - 3/4” hub, includes balancing junction box - PF
Protected Lamp
Protected Lamp or a Bottom Closure is required by Code
Lampholder for Protected Lamp
Bottom Closure Glass Lens

Requires protected lamp - PLS
Use with standard lamp lamp - BC

Options: See Below

•Specification grade porcelain lampholder.

* Must use a bottom closure or a protected lamp (See “Options”)

•Step 3: Swing closed and secure the set screw.

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

Dimensions
Standard

Reflector
D2

H

D1

3/4” Hub
‘-12’
12-3/8”
‘-14’
14-3/4”
‘-16’
161/8”

D2
12-1/2”
12-1/2”
12-1/2”

H
11-7/8”
14-1/8”
15”

Flexible Pendant - Add 2-1/2”
D1

Options

Accessories

Description

Lamp

Suffix

Coated Lamp (Recommended) - CL
Clear Lamp - L

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Finish
•White polyester powder coat finish.

FLOODLIGHTING

No suffix

† Voltage Suffix:“- UN” Suitable for 120 thru 277V, 50/60Hz
Consult local code for use on line to line circuits.

•Step 2: Hang the luminaire on the “Quick Install” plate.
Connection is easy, the 80˚ hinge design provides
ample room to connect the three wires.

SPECIALTY

Luminaire Mounting
Ceiling
Quick-Install - Mounts on 3-1/2” or 4” junction box
Surface Mount - Drilled for bolting to the ceiling
With two 1/2” plugged side entries

•Reflector - Spun aluminum , three sizes - 12-3/8”,
14-3/4” and 16-1/8” nominal diameter.
Three Step Quick-Install Mount
•Step 1: Open the box and mount the ‘Quick-Install’
plate on a standard 3-1/2” or 4” junction box.

50

-S12
-S14
-S16

Enclosed Optical Assembly
Fully gasketed optical assembly

-EOA

Description

Catalog No.

Safety Hook
Use with “Flexible Pendant” mounting only
- 3/4”NPT
Male HK75SS
Female HF75SS
Cord Set 3 conductor, 3’ long Type ST105
For lengths other than 3 feet, revise the 3
in the catalog number to the length
Cord only 3C
in feet.
Cord & 15A, 277V
Twist Lock Plug 3C-15TLP-277
Wire Guard

For ‘-12’ reflector Not available
For ‘-14’ reflector HB4-WG
For ‘-16’ reflector HB3-WG

Ballast Safety Chain - 3’ long ∆

OR-BSC3

Optical Assembly Safety Cable

OR-RSC

Power Hook
Receptacle, hook and box

HBPH-volts

HI/LO Dimming Systems See page 27
Accuflex Modular Wiring See page 28

Econobay™

Electronic, Medium Wattage, Aluminum

NEW
HIGHBAY

To order, construct the catalog number as follows

EHB 400PS –U27 –16 – K –PLS –Options

Electronic Econobay
Standard Profile EHB
Low Profile LPEHB

EHB

EHB

Standard Profile

Enclosed Optical Assembly

LOWBAY

Lamp Watts
Pulse Start Metal Halide
320W Mogul ED37 320PS *
350W
“
“
350PS *
400W
“
“
400PS
Ballast
Electronic - Variable Voltage
200V thru 277V, 50/60 Hz - U27†
Optical Assembly
Aluminum
14-3/4” dia.
16-1/8” dia.
18-5/8“ dia.

Low Profile - Spun Aluminum

EHB , LPEHB

- 14
- 16
- 18

Luminaire Mounting
Pendant

High Performance Electronic Luminaire
with Aluminum Optical Assembly

3/4” hub

Ceiling – Quick-Install
Mounts on 3-1/2” or 4” junction box

Improved Lumen Maintenance means Fewer
Luminaires per Installation
•Electronic ballasts improve lumen maintenance,
requiring fewer luminaires to maintain light levels.

COMMERCIAL & RETAIL

LPEHB

No suffix
-K

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Lampholder for Protected Lamp

Electronic Ballast
•Intelligent ballast for 200V thru 277V, 50/60Hz

Options: See Below

PARKING & CANOPY

Protected Lamp / Bottom Closure
Either a protected lamp or a bottom closure is required by Code for 320W & 350W
Optional for 400W
Use protected (ANSI Type ‘O’) lamp - PLS

Bottom Closure Glass Lens Use with standard (ANSI Type ‘S:) lamp lamp - BC

† Voltage Suffix: “- U27” Suitable for 200 thru 277V, 50/60Hz When required by local certifying bodies, use Lamp Socket Protector
on line to line circuits. To order add suffix - LSP
* Must use a bottom closure or a protected lamp (See above)

Control
•Depending on the controls selected, standard control
can be either continuous dimming or Hi/Lo switching.

Options

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

Lamp
Coated Lamp (Recommended for 18” reflector) - CL
Clear Lamp - L

Accessories

Description

Suffix

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

•Low profile housing - extruded aluminum housing.

Enclosed Optical Assembly
Fully gasketed optical assembly

Mounting
•Pendant or Quick-Install ceiling mount.

Low Profile

Reflector D

3/4” Hub

H
D

H

‘-14’
‘-16’
‘-18’

14-3/4”
16-1/8”
18-5/8”

20-1/2”
21-3/8”
28-7/8”

Standard
H
D

Reflector D

W

16-3/8” 26-7/8”
17-1/4” 27-5/8”
16-1/2” 28-7/8”

3/4” Hub ‘-14’
‘-16’
‘-18’

14-3/4”
16-1/8”
18-5/8”

H (min)
19-5/8”
20-1/2”
19-3/4”

Standard profile OR-BSC3
Low profile LPOR-BSC3
OR-RSC

Top Shroud

Dimensions
D

Ballast Safety Chain
3’ long ∆

H (Max)
21-5/8”
22-1/2”
21-3/4”

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

DL-SS
HBPH-volts

Dimming - Occupancy Sensors:
Detects infrared activity, with mounting bracket
Sensor mounting Maximum 8’
OS-8
8’ through 20’ OS-20
People 20’ through 35 OS-45
Large objects* 20’ through 45 OS-45
Dimming - Daylight Harvesting Hi/Lo dimming
Indoor Photosensor, with mounting bracket
DH-1

SPECIALTY

D

Q-DECK

For ‘-14’ reflector
HB4-WG
HB3-WG
For ‘-16’ reflector
For ‘-18’ reflector HB5-WG18

Optical Assembly Safety Cable

H (min) H (Max)

3/4” Hub
‘-14’ 14-3/4” 14-3/8”
‘-16’ 16-1/8” 15-1/4”
H
‘-18’ 18-5/8” 14-1/2”

W

Reflector

Wire Guard

Power Hook
Receptacle, hook and box

Low Temperature Starting
•Low temperature starting, –30˚C (–20˚F)

Enclosed Optical Assembly

Q-Deck Plate For quick mounting
(Mounting screws not included)

Cord only 3C
3C-15TLP-277

FLOODLIGHTING

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life,
more lumens per watt, better lumen
maintenance, faster lamp warm up, faster hot
restrike and superior color rendition.

- LSP

Dimming
Standard - Order controls separately - see right

Enclosed Optical Assembly
•Optional, prevents dirt from accumulating on reflector.

Male HK75SS
Female HF75SS

Cord Set
3’ long ∆, 3 conductor, Type ST105

-EOA

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Finish
•White polyester powder coat finish.

Safety Hook - 3/4”NPT

Cord & 15A, 277V Twist Lock Plug

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

•Lampholder - specification grade porcelain.

Catalog No.

AREA

•Reflector - Spun aluminum , three sizes 14-3/4”,
16-1/8” and 18-5/8” nominal diameter. Field
adjustable, five positions for light control.

-Q

Description

SECURITY

•Multi-watt ballast, 320W, 350W or 400W. Preset at
the factory - field adjustable.

Dimming - Control
0 – 10V Slider dimming control DIM-0/10S
Accuflex Modular Wiring See page 28

51

NEW

Electronic, Low Wattage, Enclosed

HIGHBAY

Accuglo™

To order, construct the catalog number as follows

OR 150PS –UN –10

– K Optional

Not required

–Options

Electronic Accuglo
Standard Profile MA

LOWBAY

Lamp Watts
Pulse Start Metal Halide
50W Mogul
ED17
50
70W
“
“
70
100W
“
“
100
150W
“
“
150
Ballast
Electronic - Variable Voltage
120V thru 277V, 50/60 Hz -UN †

COMMERCIAL & RETAIL

MA
Standard Profile

Optical Assembly
Aluminum - White Finish & Drop Lens
16” nominal dia. -LB16

MA

PARKING & CANOPY

High Performance Electronic Luminaire
with Lowbay Reflector and Lens

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Protected Lamp
Optional

SECURITY

Lampholder for Protected Lamp
Options: See Below

† Voltage Suffix:“- UN” Suitable for 120 thru 277V, 50/60Hz
Consult local code for use on line to line circuits.

•Reflector - Aluminum lowbay reflector with high
reflectance white finish and virgin acrylic bottom lens
for superior brightness control.

Options

Three Step Quick-Install Mount
•Step 1: Open the box and mount the ‘Quick-Install’
plate on a standard 3-1/2” or 4” junction box.
•Step 2: Hang the luminaire on the “Quick Install” plate.
Connection is easy, the 80˚ hinge design provides
ample room to connect the three wires.

Accessories

Description

Lamp

Suffix

Coated Lamp (Recommended) - CL
Clear Lamp - L

D2

H (min)

H (Max)

3/4” Hub
-LB16 16-9/32” 12-1/2”

10-1/4”

Lampholder for Protected Lamp
Requires Protected Lamp

-RG
-PLS

Wire Guard

Cord only 3C
3C-15TLP-277

For 16” reflector MAG-WG

Ballast Safety Chain - 3’ long ∆

OR-BSC3

Optical Assembly Safety Cable
Power Hook
Receptacle, hook and box

OR-RSC
HBPH-volts

HI/LO Dimming Systems See page 27
Accuflex Modular Wiring See page 28

Flexible Pendant - Add 2-1/2”

H

Male HK75SS
Female HF75SS

Cord & 15A, 277V Twist Lock Plug

Dimensions
D

Safety Hook - 3/4”NPT

Enclosed Optical Assembly
Fully gasketed optical assembly

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

Reflector

Catalog No.

Cord Set
3’ long ∆, 3 conductor, Type ST105

Finish
•White polyester powder coat finish.

Standard

Description

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

•Step 3: Swing closed and secure the set screw.

FLOODLIGHTING

Requires protected lamp - PLS

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

•Specification grade porcelain lampholder.

SPECIALTY

- CE

Pendant
Rigid Mount - 3/4” hub, threads directly to the housing - PD
Flexible Mount - 3/4” hub, includes balancing junction box - PF

•Enclosed Optical Assembly - Optional fully gasketed
lens and reflector.

D1

52

No suffix

Fewer Luminaires per Installation
•Electronic ballasts improve lumen maintenance. Fewer
luminaires are required to maintain light levels.

Electronic Ballast
•Intelligent ballast for 120V thru 277V, 50/60Hz

AREA

Luminaire Mounting
Ceiling
Quick-Install - Mounts on 3-1/2” or 4” junction box
Surface Mount - Drilled for bolting to the ceiling
With two 1/2” plugged side entries

∆ For lengths other than 3 feet,
revise the 3 in the catalog number
to the length in feet.

Accuglo™

NEW

Electronic, Medium Wattage, Enclosed

HIGHBAY

To order, construct the catalog number as follows

EAG 400PS –U27 –22 – K –Options
Electronic Accuglo
Standard Profile EAG
Low Profile LPEAG
EAG

EAG

Standard Profile

Enclosed Optical Assembly

LOWBAY

Lamp Watts
Pulse Start Metal Halide
320W Mogul ED37 320PS
350W
“
“
350PS
400W
“
“
400PS
Ballast
Electronic - Variable Voltage
200V thru 277V, 50/60 Hz -U27†

COMMERCIAL & RETAIL

LPEAG
Low Profile

EAG, LPEAG

Optical Assembly
Aluminum - White Finish & Drop Lens
22” nominal dia. - 22

High Performance Electronic Luminaire
with Lowbay Reflector and Lens

Luminaire Mounting
Pendant

Ceiling – Quick-Install
Mounts on 3-1/2” or 4” junction box

Lampholder for Protected Lamp

Use protected (ANSI Type ‘O’) lamp - PLS

Options: See Below

Electronic Ballast
•Intelligent ballast for 200V thru 277V, 50/60Hz

† Voltage Suffix: “- U27” Suitable for 200 thru 277V, 50/60Hz When required by local certifying bodies, use Lamp Socket
Protector on line to line circuits. To order add suffix - LSP

•Multi-watt ballast, 320W, 350W or 400W. Preset at
the factory - field adjustable.

Options

Construction
•Standard profile housing - die cast aluminum housing,
steel cover plate.

Lamp

Accessories

Description

Suffix

Coated Lamp - CL
Clear Lamp - L

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

•Low profile housing - extruded aluminum housing.

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

•Enclosed Optical Assembly - Optional fully gasketed
lens and reflector.

Enclosed Optical Assembly
Fully gasketed optical assembly

•Lampholder - specification grade porcelain.

-RG

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

Mounting
•Pendant or Quick-Install ceiling mount.

- LSP

19-1/2”

D

H

W

3/4” Hub

W

22”

22-1/2”

Q-Deck Plate For quick mounting
(Mounting screws not included)
Wire Guard

Q-DECK

For 22” reflector AG-WG

Ballast Safety Chain - 3’ long ∆
Standard profile OR-BSC3
Low profile LPOR-BSC3
AG-RSC
HBPH-volts

DH-1

Dimming - Control
0 – 10V Slider dimming control DIM-0/10S
Accuflex Modular Wiring See page 28

16-3/4” 34-1/2”

H

D

∆ For lengths other than 3 feet, revise the 3 in
the catalog number to the length in feet.

53

SPECIALTY

Reflector

Cord only 3C
3C-15TLP-277

Dimming - Daylight Harvesting
Indoor Photosensor, with mounting bracket
Hi/Lo dimming

D
Low Profile

Cord & 15A, 277V Twist Lock Plug

FLOODLIGHTING

22-1/2”

Cord Set
3’ long ∆, 3 conductor, Type ST105

Dimming - Occupancy Sensors:
Detects infrared activity, with mounting bracket
Sensor mounting Maximum 8’
OS-8
8’ through 20’ OS-20
People 20’ through 35 OS-45
Large objects* 20’ through 45 OS-45

Standard Profile & Enclosed Optical Assembly
Reflector
D
H
3/4” Hub
22”

Male HK75SS
Female HF75SS

Power Hook
Receptacle, hook and box

Dimensions

H

Safety Hook - 3/4”NPT

Optical Assembly Safety Cable

Dimming
Standard - Order controls separately - see right

Finish
•White polyester powder coat finish.

Catalog No.

AREA

•Reflector - Aluminum lowbay reflector with high
reflectance white finish and virgin acrylic bottom lens
for superior brightness control.

-Q

Description

SECURITY

Control
•Depending on the controls selected, standard control
can be either continuous dimming or Hi/Lo switching.

Low Temperature Starting
•Low temperature starting, –30˚C (–20˚F)

-K

Protected Lamp / Bottom Closure
Optional

•High performance AccuLite luminaires provide more
useable light to the seeing task, further reducing the
fixture count for even greater savings.

Pulse Start Metal Halide Lamps
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color
rendition.

No suffix

PARKING & CANOPY

Improved Lumen Maintenance means Fewer
Luminaires per Installation
•Electronic ballasts improve lumen maintenance,
requiring fewer luminaires to maintain light levels.

Enclosed Optical Assembly
•Optional, prevents dirt from accumulating on reflector.

3/4” hub

HIGHBAY

Regressed Luminaires

LOWBAY

Accessories: Accuflex Modular Wiring System

Duralume (Open 2 x 2 Regressed Downlight for Non-Insulated Suspended Ceilings)

COMMERCIAL & RETAIL

General lighting of Indoor Commercial and Retail Stores

SECURITY

PARKING & CANOPY

Lamp wattages up to 450 Watts

Paralume (Enclosed 2 x 2 Regressed Downlight for Non-Insulated Suspended Ceilings)
General lighting of Indoor Commercial and Retail Stores

FLOODLIGHTING

AREA

Lamp wattages up to 450 Watts

SPECIALTY

Prismatic glass lens for good brightness control

Parabolic louver for maximum brightness control
and narrower light distribution

54

Duralume™

Regressed Luminaire
Lamp
Base

U. S. A.
Catalog Number (F-CAN)

HIGHBAY

Lamp
Watts

CANADA
Catalog Number (Cast Ballast)

With Side Mounted Ballast and Pan
Metal Halide
DL

DLRC

For Top Mounted Ballast

Side Mounted Cast Ballast

250
400

Mogul
“

DLRC-250MH-volts-PLS ∆
DLRC-400MH-volts

–
DLRP-400MH-volts †

LOWBAY

Pulse Start Metal Halide

Side Mounted F-Can Ballast

Mogul
“
“
“
“
“

–
DLRC-200MH-volts-PSB-PLS ∆
DLRP-250MH-volts-PSB-PLS ∆† DLRC-250MH-volts-PSB-PLS ∆
DLRP-320MH-volts-PSB-PLS ∆† DLRC-320MH-volts-PSB-PLS ∆
DLRP-350MH-volts-PSB-PLS ∆† DLRC-350MH-volts-PSB-PLS ∆
DLRP-400MH-volts-PSB †
DLRC-400MH-volts-PSB
–
DLRC-450MH-volts-PSB

COMMERCIAL & RETAIL

DLRP

200
250
320
350
400
450

DLR
Fully Faceted Optical Assembly
for Inverted T-Bar Ceilings

•Eleven position reflector.
•Mounts in standard 2’ X 2’ T-bar ceiling openings.
•Regressed pan mounts the reflector a full 2” above the
ceiling plane.
Pre-wired
•Pre-wired flexible conduit protects wiring from ballast to
the junction box.

Thermal Cut-Out Ballasts
•‘F-Can’ ballast types feature a thermal cut out.
New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, superior color
rendition, faster lamp warm up and faster hot restrike.

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

With Top Mounted Cast Ballast
Order pan separately
Metal Halide
250
400

Mogul
“

DL-250MH-volts-17-PLS∆
DL-400MH-volts-17

200
250
320
350
400
450

Mogul
“
“
“
“
“

DL-200MH-volts-PSB-17-PLS∆
DL-250MH-volts-PSB-17-PLS∆
DL-320MH-volts-PSB-17-PLS∆
DL-350MH-volts-PSB-17-PLS∆
DL-400MH-volts-PSB-17
DL-450MH-volts-PSB-17-PLS

Voltage Suffix: change “volts” to – “- 120” 120V
“- 208” 208V †
“- 240” 240V †

Description

Lamp
Coated MH lamp (recommended)
Clear lamp

Pan

Min.:
Max.:
Length:
Width:

26-1/2”
28”
23-3/4”
23-3/4”

- CL
-L
- PLS

-Q

DLRP models Standard
DLRC models - POT

Catalog No.

Top Shroud
Ballast Safety Chain - 3’ long ∆

- DL-SS
- DLRP-3SC

HI/LO Switching Systems
Group Switching only
DL & DLRC Models only
(Not available with DLRP Models) See page 17
Accuflex Modular Wiring
Flexible Wiring System See page 18
∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage
Remote Optical Assembly
Replace the Voltage with

- RB

Lamp Socket Protector
Use on line to line circuits
when required by local certifying bodies

- LSP

SPECIALTY

Height

“- 277” 277V
“- 347” 347V †
“- 480” 480V †

FLOODLIGHTING

Potted Ballasts
For low noise requirements

DLRC With Side Mounted Cast Ballast - Only Available in Canada

DL Top Mounted Cast Ballast and Pan - Only Available in Canada

DL-2424-REC-PAN
DL-2424-REC-PAN
DL-2424-REC-PAN
DL-2424-REC-PAN
DL-2424-REC-PAN
DL-2424-REC-PAN

Description

Suffix

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

Overall: 21”
Length: 23-3/4”
Width: 23-3/4”

+
+
+
+
+
+

Accessories

Options

DLRP With Side Mounted F-Can Ballast

Height
Pan

DL-2424-REC-PAN
DL-2424-REC-PAN

∆ Requires protected lamp (Order Separately)
† DLRP Models available with 120V or 277V ballasts only. (208V, 240V, 347V and 480V not available)

Lampholder for Protected Lamp
(Order Lamp Separately)

Overall: 21”
Length: 23-3/4”
Width: 23-3/4”

+
+

Pulse Start Metal Halide

Dimensions
Height
Pan

CANADA
Catalog Number (Regressed Pan)

AREA

Socket
• Specification grade porcelain lampholder.

U. S. A.
Catalog Number (Luminaire)

SECURITY

Cool Operating Cast Ballast
•Side and top mounted ballasts are heavy duty die cast
aluminum ballast.

Lamp
Base

PARKING & CANOPY

High Performance Optical Assembly
with 2’ X 2’ Regressed Pan
•Fully faceted aluminum reflector ensures high performance.

Lamp
Watts

55

HIGHBAY

Paralume™

Regressed Luminaire
Lamp
Watts

Lamp
Base

Prismatic
Glass Lens

Metal Halide
With Side Mounted Ballast

LOWBAY

175
250
400

RL175MH-volts
RL250MH-volts
RL400MH-volts

Mogul
“
“

Pulse Start Metal Halide
With Side Mounted Ballast

COMMERCIAL & RETAIL

RL
Prismatic Glass Lens

RL

175
200
250
320
350
400
450

RL175MH-volts-PSB
RL200MH-volts-PSB
RL250MH-volts-PSB
RL320MH-volts-PSB
RL350MH-volts-PSB
RL400MH-volts-PSB
RL450MH-volts-PSB

Mogul
“
“
“
“
“
“

For Inverted T-Bar Ceilings

PARKING & CANOPY

Prismatic Glass
• Paralume™ luminaires are furnished with a low
brightness tempered prismatic glass lens.
•

Easy Servicing – Swing Down Door
• With an easy access swing down door, relamping
Paralume™ is a simple tool free task.

SECURITY

Rugged Construction
• Heavy duty extruded aluminum frame. Side mounted,
the ballast housing is manufactured from heavy duty sheet
steel.
Flexible conduit protects wiring from ballast to the

lamp socket.

AREA

New Technology Pulse Start
Metal Halide Lamps & Ballasts
• Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color rendition.
Finish
• Optical assembly is finished with a highly reflective
white polyester powder coat for improved

Options

Accessories

Description

Suffix

- CL

Pulse Start Luminaires
High Performance Metal Halide
For 175W, 250W, 400W MH
For 200W, 320W, 350W, 450W

- PSB
Standard

Potted Ballasts For low noise requirements
Quartz Auxiliary
Quartz lamp not included

- POT
-Q

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

Dimensions
Luminaire with Prismatic Lens

FLOODLIGHTING

Ballast is painted black for maximum heat dissipation.

Socket
Specification grade porcelain lampholder.

14-1/2”

Thermal Cut-Out Ballasts
• Ballasts feature a thermal cut out.

SPECIALTY

•

56

HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

23-3/4”

23-3/4”

Description

Ballast Safety Chain - 3’ long ∆

Lamp
Coated MH lamp recommended

optical performance.
•

“- 277” 277V
“- 347” 347V
“- 480” 480V

Mounts in 2’ X 2’ T-bar ceiling.

Vertical Lamp
• Mounting the lamp with vertical orientation ensures
maximum light output, minimum lamp depreciation and
longest life in metal halide lamps.

•

Voltage Suffix: change “volts” to – “- 120” 120V
“- 208” 208V
“- 240” 240V

Catalog No.

RL-3SC

HI/LO Switching Systems
Group Switching only See page 17
Accuflex Modular Wiring
Flexible Wiring System See page 18
∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

Paralume™

Regressed Luminaire
With Louver &
Glass Lens
(9 cell 3” deep)

Lamp
Base

HIGHBAY

Lamp
Watts

With Louver &
Glass Lens
(16 cell 3” deep)

Metal Halide
With Side Mounted Ballast
Mogul
“
“

RL175MH-volts-9C3
RL250MH-volts-9C3
RL400MH-volts-9C3

RL175MH-volts-16C3
RL250MH-volts-16C3
RL400MH-volts-16C3

LOWBAY

175
250
400

Pulse Start Metal Halide
With Side Mounted Ballast

RL
For Inverted T-Bar Ceilings

•

3” semi-specular parabolic louvers are standard.
Louvers are available with either 9 or 16 cells. All
Paralume™ louvers are furnished with a glass lens.

•

Mounts in 2’ X 2’ T-bar ceiling.

Vertical Lamp
• Mounting the lamp with vertical orientation ensures
maximum light output, minimum lamp depreciation and
longest life in metal halide lamps.

Rugged Construction
• Heavy duty extruded aluminum frame. Side mounted,
the ballast housing is manufactured from heavy duty sheet
steel.
•

Flexible conduit protects wiring from ballast to the

lamp socket.

Options

“- 277” 277V
“- 347” 347V
“- 480” 480V

Accessories

Description

Suffix

Lamp
Coated MH lamp recommended

- CL

Pulse Start Luminaires

Description

Catalog No.

Louver
9 Cell
- Silver 4” deep
16 Cell - Silver 4” deep

Consult Factory

Ballast Safety Chain - 3’ long ∆

High Performance Metal Halide
For 175W, 250W, 400W MH
For 200W, 320W, 350W, 450W

- PSB
Standard

HI/LO Switching Systems
Group Switching only See page 17

- POT

Accuflex Modular Wiring
Flexible Wiring System See page 18

Potted Ballasts For low noise requirements
Quartz Auxiliary
Quartz lamp not included

-Q

Fuse Holder
Single pole - F1
Supplied with fuse
Two pole - F2
On multi-tap ballasts indicate line voltage

RL-3SC

∆ For lengths other than 3 feet, revise the 3 in the catalog
number to the length in feet.

AREA

New Technology Pulse Start
Metal Halide Lamps & Ballasts
• Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color rendition.

Voltage Suffix: change “volts” to – “- 120” 120V
“- 208” 208V
“- 240” 240V

RL175MH-volts-PSB-16C3
RL200MH-volts-PSB-16C3
RL250MH-volts-PSB-16C3
RL320MH-volts-PSB-16C3
RL350MH-volts-PSB-16C3
RL400MH-volts-PSB-16C3
RL450MH-volts-PSB-16C3

SECURITY

Easy Servicing – Swing Down Door
• With an easy access swing down door, relamping
Paralume™ is a simple tool free task.

RL175MH-volts-PSB-9C3
RL200MH-volts-PSB-9C3
RL250MH-volts-PSB-9C3
RL320MH-volts-PSB-9C3
RL350MH-volts-PSB-9C3
RL400MH-volts-PSB-9C3
RL450MH-volts-PSB-9C3

Mogul
“
“
“
“
“
“

PARKING & CANOPY

Louvered Models with Glass Lens
• Paralume™ luminaires are furnished with a low
brightness tempered prismatic glass lens.

175
200
250
320
350
400
450

COMMERCIAL & RETAIL

RL
Louvered with Prismatic Glass Lens

Dimensions
Luminaire with Lens and 3” Louver

16-5/8”

optical performance.
•

Ballast is painted black for maximum heat dissipation.

•

Louvers are semi-specular silver.

Socket
Specification grade porcelain lampholder.

FLOODLIGHTING

Finish
• Optical assembly is finished with a highly reflective
white polyester powder coat for improved

23-3/4”

23-3/4”

Thermal Cut-Out Ballasts
• Ballasts feature a thermal cut out.
•

SPECIALTY

HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

57

HIGHBAY

Parking Garage & Canopy

LOWBAY

Indoor and Outdoor Locations
Parking Garages, Outdoor Canopies, Stairwells and Indoor Low Ceilings
For Ceiling, Wall or Pole Mounting

COMMERCIAL & RETAIL

Best Products
Orion (Indoor)

Titan (Indoor/Outdoor)

Optimized vertical lamp parking

Vandal proof vertical lamp luminaire

garage optics with wattages

for use in parking garages,

up to 175 watts

canopies, stairwells and hallways

• Die

with wattages up to 175 watts

cast ballast housing with quick

install mounting mounting
• Prismatic

• Heavy

acrylic reflector for excel-

PARKING & CANOPY

lent vertical and horizontal lighting

wall die-cast housing with

ceiling j-box, surface conduit, pole
mount or post top mounting options

Nitelyte II (Indoor)
Optimized vertical lamp parking
garage optics with wattages
up to 175 watts
• One

piece ballast housing for

SECURITY

ceiling j-box or pendant mounting
• 6:1

spacing ratio allows widest

spacing using fewer fixtures

AREA

Better Products
Accusquare MCL

Accusquare CL

Low wattage canopy light for HPS

High wattage canopy light with

lamps up to 50 watts. Designed for

lamp wattages up to 400 watts

lower 8-12 foot mounting heights
• Injection

molded one-piece

• Heavy

gauge die-formed steel

housing

polycarbonate housing

• Choice

of injection molded

FLOODLIGHTING

one-piece dropped prismatic
acrylic diffuser or tempered
prismatic flat glass lens

Good Products
Accupark
Low wattage vertical lamp parking

SPECIALTY

garage luminaire.
• HPS

lamp wattages up

to 150 watts
• Metal

Halide lamp wattages

up to 100 watts
58

Orion™

Parking Garage Luminaire
HIGHBAY

Lamp
Watts

Ceiling - with Quick Install Kit
Clear Acrylic Reflector

Base

Metal Halide
175

OR175MH-volts-A12

Medium

Pulse Start Metal Halide
OR

OR

With A12 Reflector

With O12W Reflector

OR50PS-volts-A12
OR70PS-volts-A12
OR100PS-volts-A12
OR150PS-volts-A12
OR175PS-volts-A12

Medium
“
“
“
“

LOWBAY

50
70
100
150
175

High Pressure Sodium
OR

With T12W Reflector

Quick Install Assembly

OR
Wide Distribution—
Install Fewer Luminaires

OR35HP-volts-A12
OR50HP-volts-A12
OR70HP-volts-A12
OR100HP-volts-A12
OR150HP-volts-A12

Medium
“
“
“
“

Compact Fluorescent
Triple or quad tube lamp
26
CFTR26W/GX24Q
32
CFTR32W/GX24Q
42
CFTR42W/GX24Q
57
CFTR57W/GX24Q
70
CFTR70W/GX24Q

OR26CF-volts-A12
OR32CF-volts-A12
OR42CF-volts-A12
OR57CF-volts-A12
OR70CF-volts-A12

Induction Lamp

•Choice of three reflectors – clear, translucent white or
opaque white.

Consult Factory

•Clear acrylic dome permanently attached to the
reflector.

Primary Voltage Availability § – Replace “-volts” in catalog number with required voltage suffix listed below.

Relamping
• Fast and easy with a twist off lens assembly.

•Lamp life for base up MH lamps is up to 25% longer
than the same lamp mounted horizontally.
Aluminum Housing
• Heavy wall die cast aluminum housing for quiet, cool
operation.

•Pendant – Rigid mount with 3⁄4” conduit.
•Ceiling, Surface Mount – Ballast is drilled to mount
directly to the ceiling over a recessed junction box.

•Single concealed set screw secures optical assembly in
place. A tamper proof option is available.
Finish
• White polyester powder coat finish.
Socket
• Specification grade porcelain lampholder.

–
–
–
–
–
–
–
–

–
–
–
–
–
–
–
–

HP
–
–
HP
–
–
–
–

–
–
–
–
–
–
–
–

HP/PS
–
–
HP/PS
–
–
–
–

–
–
–
–
–
–
–
–

70W 100W 150W 175W
–
HP/PS
HP/PS
–
HP/PS
HP/PS
HP/PS
–

–
HP/PS
HP/PS
–
HP/PS
HP/PS
HP/PS
PS

–
HP/PS
HP/PS
–
HP/PS
HP/PS
HP/PS
PS

–
MH/PS
MH/PS
–
MH/PS
MH/PS
MH/PS
MH/PS

Electronic Ballast
Consult lamp manufacturer for lamp/ ballast compatibility when specifying pulse start metal halide lamp with electronic ballasts.
120 thru 277V
- UN
CF
CF
–
CF
PS
CF
CF/PS
PS
PS
PS
347V
- 347
CF
CF
–
CF
PS
CF
CF/PS
PS
PS
–

§ Indicates available ballasts:
CF – Compact Fluorescent, HP – High Pressure Sodium,
MH – Metal Halide, PS – Pulse Start Metal Halide

* For luminaires supplied with “Quick-Install” specify
voltage

Options
Description

Suffix

Description

Lamp With clear HID lamp
With coated HID lamp
Compact Fluorescent Lamp
Induction Lamp

-L
- CL
By others
Consult Factory

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

-Q

Protected Igniter HPS Only

- PI

Reflector - 12” Polycarbonate
Replace “-A12” with – 12” Clear - P12
Mounting
Ceiling – Quick Install
Mounts on 4” junction box See above
– Surface
Drilled for bolting to the ceiling

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage
Tamper Proof

Pendant – 3/4” top entry
Color

OR

- CE

– Side Entry
Two 1/2” side entries, two plugs - SE

- TP

Dimensions

Suffix

Reflector - 12” Acrylic
Replace “-A12” with
Opaque white finish - O12W
12” - Translucent white finish - T12W

- PD

White
Standard
Other Colors Consult Factory

12-1/2”
13-1/2”
59

SPECIALTY

Ballasts
• HPF ballasts are suitable for low temperature starting.
Pulse Start MH -40°C, HPS -40°C, CF -18˚C

- 120
- 208
- 240
- 277
- 347
- QT *
- TT *
- 480

26W 32W 35W 42W 50W 57W

FLOODLIGHTING

•Ceiling, Side Entry – With two 1/2” tapped side entries
and two plugs.

Suffix

Magnetic Ballast
120V
208V
240V
277V
347V
120/208/240/277V
120/277/347V
480V

AREA

Mounting
•Ceiling – With Quick Install kit – Mount the adapter
plate on a standard 4” octagonal junction box, hang the
luminaire on the built in hook, wire the luminaire then
secure a set screw.

Volts

SECURITY

Vertical Lamp Position
•Metal halide lamps when mounted base up, give
10% to 20% more light than fixtures with
horizontal positioned metal halide lamps.

PARKING & CANOPY

Optics
• Acrylic 12” reflector with prisms arranged to provide
good vertical and horizontal illumination, comfortable
ceiling illumination.

35
50
70
100
150

COMMERCIAL & RETAIL

OR

Nitelyte™ II Parking

HIGHBAY

NEW

Garage Luminaire

Lamp
Watts

Ceiling - with Quick Install Kit
Clear Acrylic Reflector -NEMA V

Base

Metal Halide
Uses Vertical Lamp
NL2-175MH-volts

175
Medium
Pulse Start Metal Halide

LOWBAY

Uses Vertical Lamp

COMMERCIAL & RETAIL

50
70
100
150
175
NL2

With vertical metal
halide lamp

NL2-50PS-volts
NL2-70PS-volts
NL2-100PS-volts
NL2-150PS-volts
NL2-175PS-volts

Medium
“
“
“
“

High Pressure Sodium
Uses Vertical Lamp

NL2

PARKING & CANOPY

Wide Distribution—
Install Fewer Luminaires
Optics
• Acrylic 12” refractor with prisms arranged to provide
good vertical and horizontal illumination, comfortable
low level ceiling illumination while eliminating hot spots
under the fixture.
Relamping
• Fast and easy with a hinged lens assembly.

AREA

SECURITY

Vertical Lamp Position
•Metal halide lamps when mounted base up, give
10% to 20% more light than fixtures with
horizontal positioned metal halide lamps.

Primary Voltage Availability § – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts

Suffix

35W

50W

70W

100W

150W

175W

Magnetic Ballast
120V
208V
240V
277V
347V
120/208/240/277V
120/277/347V
480V

- 120
- 208
- 240
- 277
- 347
- QT *
- TT *
- 480

HP
–
–
HP
–
–
–
–

HP/PS
–
–
HP/PS
–
–
–
–

–
HP/PS
HP/PS
–
HP/PS
HP/PS
HP/PS
–

–
HP/PS
HP/PS
–
HP/PS
HP/PS
HP/PS
PS

–
HP/PS
HP/PS
–
HP/PS
HP/PS
HP/PS
PS

–
MH/PS
MH/PS
–
MH/PS
MH/PS
MH/PS
MH/PS

§ Indicates available ballasts:
HP – High Pressure Sodium, MH – Metal Halide, PS – Pulse Start Metal Halide
* For luminaires supplied with “Quick-Install” specify voltage

Aluminum Housing
• Heavy wall die cast aluminum housing for quiet, cool
operation.

Options

Mounting
•Ceiling – With Quick Install kit – Mount the adapter
plate on a standard 4” octagonal junction box, hang the
luminaire on the built in hook, wire the luminaire then
secure a set screw.

Lamp With clear HID lamp
With coated HID lamp
Compact Fluorescent Lamp
Induction Lamp

-L
- CL
By others
Consult Factory

Quartz Auxiliary
Double contact bayonet base
Quartz lamp not included

-Q

Protected Igniter HPS Only

- PI

•Ceiling, Surface Mount – Ballast is drilled to mount
directly to the ceiling over a recessed junction box.
Furnished with two 1/2” tapped side entries and two
plugs.

FLOODLIGHTING

NL2-35HP-volts
NL2-50HP-volts
NL2-70HP-volts
NL2-100HP-volts
NL2-150HP-volts

Medium
“
“
“
“

•Lamp life for base up MH lamps is up to 25% longer
than the same lamp mounted horizontally.

•Pendant – Rigid mount with 3⁄4” conduit.

•Single concealed set screw secures optical assembly in
place. A tamper proof option is available.

Description

Suffix

Description

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage
Tamper Proof

Reflector - 12” Polycarbonate 12” Clear - P12

Socket
• Specification grade porcelain lampholder.

Color

Reflector - NEMA II

Suffix

Mounting
Ceiling – Quick Install
Mounts on 4” junction box See above
– Surface
Two 1/2” side entries, two plugs
Drilled for bolting to the ceiling
- CE
Two 1/2” side entries, two plugs
Pendant – 3/4” top entry

- TP

Finish
• White polyester powder coat finish.

Ballasts
• HPF ballasts are suitable for low temperature starting.
Pulse Start MH -40°C, HPS -40°C, CF -18˚C

SPECIALTY

35
50
70
100
150

Consult Factory
White
Standard
Other Colors Consult Factory

Dimensions
NL2
12-1/2”
13-1/2”

60

- PD

Titan™

Parking Garage and Canopy Lighting
Ceiling &
Pendant Mount*

HIGHBAY

Lamp
Watts

Pole Mount
Includes 6” Arm

Metal Halide
With Vertical Lamp
CPL175MH-volts-VL

175

CPL175MH-volts-VL-PM

Pulse Start Metal Halide

CPL

LOWBAY

With Vertical Lamp

CPL

CPL50MH-volts-VL-PM
CPL70MH-volts-VL-PM
CPL100MH-volts-VL-PM
CPL150MH-volts-PSB-VL-PM
CPL175MH-volts-PSB-VL-PM

COMMERCIAL & RETAIL

CPL
Pole Mount

CPL50MH-volts-VL
CPL70MH-volts-VL
CPL100MH-volts-VL
CPL150MH-volts-PSB-VL
CPL175MH-volts-PSB-VL

50
70
100
150
175

Post Top Mounting Bracket

High Pressure Sodium
With Vertical Lamp (See options for horizontal lamp)

CPL
Indoor/Outdoor
Vertical Metal Halide Lamp
Ceiling, Wall or Pole Mounting

Vertical Lamp Position
•Metal halide lamps when mounted base up, give
10% to 20% more light than fixtures with
horizontal positioned metal halide lamps.

CPL35HP-volts-VL-PM
CPL50HP-volts-VL-PM
CPL70HP-volts-VL-PM
CPL100HP-volts-VL-PM
CPL150HP-volts-VL-PM

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts

Suffix

120V
120V
Reactor NPF
120V
Reactor HPF
277V
120/208/240/277V
120/277/347V
480V

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

35W

50W

70W

100W

150W

175W

HP
HP
HP
HP
–
–
–

HP/PS
HP
HP
HP/PS
–
–
–

–
HP
HP
–
HP/PS
HP/PS
–

–
HP
HP
–
HP/PS
HP/PS
HP/PS

–
HP
HP
–
HP/PS
HP/PS
HP/PS

–
–
–
–
MH/PS
MH/PS
MH/PS

PARKING & CANOPY

Optics
• Choice of standard polycarbonate or optional acrylic
lens. The internal prisms internal stay cleaner for better
maintained light levels.

CPL35HP-volts-VL
CPL50HP-volts-VL
CPL70HP-volts-VL
CPL100HP-volts-VL
CPL150HP-volts-VL

35
50
70
100
150

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide, PS – Pulse Start Metal Halide

Accessories

Aluminum Housing

Options

• Heavy wall die cast aluminum housing.

Description

• Four plugged 1/2” entries for feed-thru or “T” wiring
plus provision for outlet box mounting.

Lamp With Clear Lamp

-L

Pulse Start Ballast
150W only
50W, 70W, 100W MH

- PSB
Standard

Mounting
• Wall, ceiling, pendant, outlet box and pole mounting.

Finish
• Bronze polyester powder coat finish.
Socket
• Specification grade porcelain lampholder.

Lamp Orientation
Vertical lamp (MH & HPS)
Horizontal lamp (HPS Only) Change -VL to

See Above
- HL

Protected Igniter
For HPS Luminaires

- PI

Catalog No.

Wall Mount
Kit adapts ceiling mounted fixture
for wall mounting. (Includes internal
reflector and bracket)
Pole Mounting
Mounts to square pole

CPL-WM
-PM

Post Top Mounting
Adapts Titan™ luminaire for pole top
Tenon 2”IPS (2-3/8” OD)

CPL-SFCA

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage
Tamper Proof

- TP

Color

Bronze - Standard
White
- WH
Black
- BL

Lens

Polycarbonate
Standard
Acrylic (Max 100W) - AC

FLOODLIGHTING

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

Description

Suffix

AREA

•Post top mounting. Adapts Titan™ for use in locations
such as walkways, gardens and any other area with
low mounting poles.

SECURITY

•Lamp life for base up MH lamps is up to 25%
longer

Dimensions
CPL

12-3/8”

Threaded Pole Bracket
Use 5/16 Bolt

12-3/8”

SPECIALTY

8-5/8”

1-1/4”

61

HIGHBAY

Accupark™

Parking Garage Luminaire
Lamp
Watts

Lamp
Base

Ballast

Medium
”
”

120
“
“

Ceiling Mount
Catalog Number

Metal Halide
With Vertical Lamp

LOWBAY

50
70
100

MPG50MH-120
MPG70MH-120
MPG100MH-120

High Pressure Sodium
With Vertical Lamp

COMMERCIAL & RETAIL

MPG

MPG
Rugged Steel Construction

PARKING & CANOPY

Optics
• Designed for vertical, base up lamps. Prismatic U.V.
stabilized polycarbonate with low brightness and even
light characteristics. Anodized aluminum reflector.

35
50
70
100
150

Medium
“
”
”
”

120NPF
“
“
“
“

Select Voltage Suffix:
35-150W HPS
Reactor NPF
Reactor HPF
50-100W MH
50-100W

MPG35HP-120NP
MPG50HP-120NP
MPG70HP-120NP
MPG100HP-120NP
MPG150HP-120NP

See Above
“-120R”
See Above

120V Only
120V Only
120V Only

Housing
• High strength steel housing. Gasketed lens.
Mounting
• Knockouts for ceiling and side entry.
Finish
• Bronze polyester powder coat finish.

SECURITY

Socket
• Specification grade porcelain lampholder.

AREA

Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Options
Description

Suffix

Lamp With clear lamp

-L

Tamper Proof
Color

- TP
Bronze - Standard
White - WH
Black - BL

Dimensions

FLOODLIGHTING

MPG

9”

9”

SPECIALTY

8-1/4”

62

Accusquare™

Canopy Luminaires
Lamp
Base

120V Normal Power Factor

HIGHBAY

Lamp
Watts

120V High Power Factor

High Pressure Sodium
35
50

MCL35HP-120
MCL50HP-120

* Furnished with North American lamp and North American 120V NPF ballast.
Bronze Finish. Optional White add suffix -WH
Note: Only available for 120V.

LOWBAY

MCL

MCL35HP-120NP
MCL50HP-120NP

Medium
“

MCL
Low Wattage Canopy Lighting
Low Mounting Heights
Housing
• Injection molded one piece polycarbonate housing.
Optics
• I.E.S. Type V prismatic lens, molded from UV
stabilized polycarbonate and hydro-formed aluminum
reflector.

Description

Suffix

Lamp With clear lamp

-L

Tamper Resistant Hardware

- TP

Dimensions
MCL
10”

Mounting
• Mounts to a standard 4” box.

PARKING & CANOPY

Indoor or Outdoor Use
• Certified for both indoor and outdoor use.

Options
COMMERCIAL & RETAIL

• Designed for canopies from 8 to 12 feet high.

10”

Ballasts
• Standard high pressure sodium high power factor
ballasts. Optional normal power factor ballast.

5”

Lamp
Watts

Lamp
Base

No
External Holes

Ceiling
Mount

Pole Mounting (Order
Mounting Arm Separately)

Metal Halide
Mogul
“

CL250MH-volts
CL400MH-volts

CL250MH-volts-CE
CL400MH-volts-CE

CL250MH-volts-PM
CL400MH-volts-PM

CL250HP-volts-CE
CL400HP-volts-CE

CL250HP-volts-PM
CL400HP-volts-PM

SECURITY

250
400

High Pressure Sodium
250
400

Mogul
“

CL250HP-volts
CL400HP-volts

CL

High Wattage Canopy Lighting

Options

Optics
• Standard drop lens is injection molded acrylic.
Optional tempered prismatic flat glass or molded
polycarbonate drop lens.

Accessories
Description

Suffix

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others

- PCR

Rugged Construction
• Heavy duty steel construction. Bronze polyester powder
coat finish.

Lens
Flat tempered prismatic glass

- TPG

Polycarbonate Drop Lens

- PDL

Indoor or Outdoor Use
• Certified for both indoor and outdoor use CL series is
gasketed to keep out moisture and dirt.

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

•Standard HPF ballasts have a minimum starting temperature – HPS-40°C MH-30°C.

CL-8AM-BZ

Dimensions
CL - Standard Drop Lens

Bronze - Standard
White - WH
Black - BL

21-1/2”

21-1/2”

11”

CL - Optional Flat Prismatic Lens
21-1/2”

SPECIALTY

Ballasts
• Tray mounted.

Color

Catalog No.

Mounting Arm
8” extension
Bronze

FLOODLIGHTING

Choice of Mounting
• Order with no external holes and drill on site to match
the existing installation, order predrilled for ceiling
mount or order for pole mounting.

Description

Lamp With Clear Lamp

AREA

CL

Voltage Suffix: change “volts” to – “- QT” Quad Tap: 120V, 208V, 240V, 277V ,
“- TT” Tri Tap: 120V, 277V, 347V ,
“- 480” 480V

21-1/2”

8”

63

HIGHBAY

Securit y Lighting
Outdoor Wall Mounting

LOWBAY

Standard Wall Mounted Security Lighting
Accupak MWP

Accupak WLS

Low wattage wall pack for MH

Low wattage wall pack for HPS

lamps up to 100 watts and HPS

lamps up to 100 watts

lamps up to 150 watts
• Die

• Die

cast aluminum back plate with

cast housing with injection

molded one-piece polycarbonate

injection molded one-piece vandal

lens/cover

COMMERCIAL & RETAIL

resistant lens/cover
Accupak WP

Accupak WMLM & WLL

Medium wattage wall pack for MH

High wattage wall pack for lamps up

lamps up to 175 watts and HPS

to 400 watts

lamps up to 150 watts
• Die

• Die

cast aluminum housing and

cast aluminum housing and

door with borosilicate glass lens

PARKING & CANOPY

door with borosilicate glass lens

SECURITY

Architectural Cut-Off Wall Mounted Security Lighting
Polaris - Half Sphere

Polaris - Trapezoid

Low wattage wall pack for MH

Low wattage wall pack for MH

lamps up to 175 watts and HPS

lamps up to 175 watts and HPS

lamps up to 150 watts

lamps up to 150 watts

• Specification

• Specification

grade die cast alu-

minum with “Easy Install mounting

grade die cast alu-

minum with “Easy Install mounting

AREA

Controlled Cut-Off Wall Mounted Security Lighting
Decorative Dark Sky Wall Pack

Perimeter and Horizontal

For Full Cut-Off Applications

Cut-Off Wall Packs

Medium wattage model for lamps up

Low brightness, cut-off with lateral

to 175 watts and high wattage models

distribution for perimeter applica-

for 250 watt and 400 watt

tions

• Die

• Die

cast aluminum construction with

tempered glass lens

cast back aluminum housing

with one-piece polycarbonate lens

FLOODLIGHTING

and internal light shroud

SPECIALTY

Economy Wall Mounted Security Lighting
Wall-Lux

Secure-Lux

TwiLiter

Low wattage

Low wattage cylin-

Dusk to dawn

economy wall pack

drical style security

lighting

for HPS lamps up to

light for HPS lamps

• With

70 watts

up to 50 watts.

sodium or mercury

• Die

cast back alu-

• Polycarbonate

vapor lamps

minum back plate

luminaire with

with one-piece

cylindrical lens

polycarbonate lens
64

high pressure

Accupak™

Wall Mounted Security Lighting
Lamp
Base

Catalog Number

Medium
”
”

MWP50MH-volts-KA
MWP70MH-volts-KA
MWP100MH-volts-KA

HIGHBAY

Lamp
Watts

Metal Halide
50
70
100

LOWBAY

High Pressure Sodium
MWP35HP-volts
MWP50HP-volts
MWP70HP-volts
MWP100HP-volts
MWP150HP120NP✩

Medium
”
”
”
”

COMMERCIAL & RETAIL

MWP

35
50
70
100
150✩

✩ Available with reactor ballast only.

MWP

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.

Cast Mounting Plate
One Piece Cover

Volts

35W

50W

70W

100W

150W

- 120
- 120NP
- 120R
- 277
- QT
- TT

HP
HP
HP
HP
–
–

HP/MH
HP
HP
HP/MH
–
–

–
HP
HP
–
HP/MH
HP/MH

–
HP
HP
–
HP/MH
HP/MH

–
HP
HP
–
–
–

PARKING & CANOPY

Wide Lamp Range Available
•Available with medium based lamps – 50 thru 100 watt
Metal Halide and 35 thru 150 watt High Pressure
Sodium lamps.

120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V

Suffix

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide

Cool Operating
• Larger housing and one piece cast mounting plate
dissipates heat more quickly.
Easy Installation
•Installation is simplified with both cast in bosses for
3-1/2” or 4” outlet boxes and a 1/2” bottom entry for
conduit.

Description

Lamp With clear lamp

-L

Photocontrol
On multi-tap ballasts indicate line voltage - PC (volts)

•HPS – Polycarbonate.

Tamper Resistant Hardware

•MH – Acrylic.

Color
MWP Series Only

• Gasketed at both the lens and junction box.

Suffix

SECURITY

One Piece Cover
• Vandal resistant lens/cover assembly with a
combination of internal and external prisms for
light control.

Options

- TP
White - WH
Black - BL

Finish
•Standard bronze.

Dimensions

•Optional black and white.

MWP

AREA

Photocontrol
•Mounted inside the fixture.

•External hardware is stainless steel.

FLOODLIGHTING

Ballasts
•Available with reactor (NPF and HPF) and
CWA ballasts.

14”

8-1/2”

5-1/2”

SPECIALTY
65

Wall Mounted Security Lighting

HIGHBAY

Accupak™

Lamp
Watts

Lamp
Base

Normal Power
Factor

High Power
Factor

High Pressure Sodium

LOWBAY

35
50
70
100

Medium
”
”
”

WLS35HP-120NP
WLS50HP-120NP
WLS70HP-120NP
WLS100HP-120NP

COMMERCIAL & RETAIL

WLS

Options

WLS
Polycarbonate Lens
Cast Mounting Plate

Description

Lamp With clear lamp

Suffix

-L

Photocontrol

- PC

Tamper Resistant Hardware

- TP

PARKING & CANOPY

Cool Operating Die Cast Housing
•One piece die cast mounting plate dissipates heat
quickly. Standard bronze finish.
Easy Installation
•Cast in bosses for 3-1/2” or 4” outlet box and a 1/2”
bottom entry for conduit.
One Piece Polycarbonate Cover
•One piece polycarbonate hinged lens / cover
assembly.
•Internal prisms stay clean.

SECURITY

•Gasketed lens and junction box.
Medium Based Lamps
•Available with 35 thru 100W medium based HPS
lamps.
Socket
•Specification grade porcelain lampholder.
Ballasts
•Select 120V high or normal power factor
reactor ballast.

AREA

Dimensions

FLOODLIGHTING

WLS

9-3/8”

SPECIALTY

8-1/2”

66

7”

WLS35HP-120R
WLS50HP-120R
WLS70HP-120R
WLS100HP-120R

Accupak™

Wall Mounted Security Lighting
Lamp
Base

HIGHBAY

Lamp
Watts

Catalog Number

Metal Halide
WP50MH-volts
WP70MH-volts
WP100MH-volts
WP150MH-volts
WP175MH-volts

Medium
”
”
“
Mogul

LOWBAY

50
70
100
150
175

High Pressure Sodium

WP

175W

with Full Cut-Off Shield

WP70HP-volts
WP100HP-volts
WP150HP-volts

Medium
”
”

WP

Options

Gasketed Glass Lens
Cast Aluminum Body

Lamp With clear lamp

Gasketed Glass Lens
•Ideal for areas of high vandalism. The glass lens is
gasketed and secured mechanically eliminating silicone
sealants.

Tamper Resistant Hardware

COMMERCIAL & RETAIL

WP

70
100
150

Accessories

Description

Suffix

Description

-L

- TP

Guard
Wire
Polycarbonate

M-WG
M-PG

Visor
IES Classification: Full Cut-Off

WP-FC

PARKING & CANOPY

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)

Catalog No.

• Lens replacement is easy, just remove four screws and
insert a new lens.
“Dark Sky” Cut-Off Visor
•Optional visor meets IES Full Cut-Off requirements.

Construction
•Die cast aluminum, bronze polyester powder coat finish,
borosilicate glass lens.
•Silicone rubber gaskets.
•External hardware is stainless steel.

Volts
120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V
480V

Suffix

35W

50W

70W

100W

150W

175W

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

HP
HP
HP
HP
–
–
–

HP/MH
HP
HP
HP/MH
–
–
–

–
HP
HP
–
HP/MH
HP/MH
–

–
HP
HP
–
HP/MH
HP/MH
HP/MH

–
HP
HP
–
HP/MH
HP/MH
HP/MH

–
–
–
–
MH
MH
MH

SECURITY

Side Hinged Door
•Side hinged to free up both hands during relamping, the
door is keyed to prevent accidental removal.

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide

Easy Installation
•Bosses for 3-1/2” or 4” outlet boxes, three 1/2” conduit
entries.

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

AREA

Socket
•Specification grade porcelain lampholder.

Dimensions
WP

FLOODLIGHTING

9”

SPECIALTY

13”
7-1/2”

67

Wall Mounted Security Lighting

HIGHBAY

Accupak™

Lamp
Watts

Lamp
Base

Catalog Number

Metal Halide
250
400
WLL

250W

400W

LOWBAY

WMLM

WMLM250MH-volts
WLL400MH-volts

Mogul
”

High Pressure Sodium
250
400

COMMERCIAL & RETAIL

WLL
with Full Cut-Off Shield

WMLM250HP-volts
WLL400HP-volts

Mogul
”

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

WMLM & WLL
Gasketed Glass Lens
Cast Aluminum Body

PARKING & CANOPY

“Dark Sky” Cut-Off Visor
•Optional visor meets IES Full Cut-Off requirements.
Hinged Door
•Hinged to free up both hands during relamping, the
door is keyed to prevent accidental removal.
Construction
•Die cast aluminum, bronze polyester powder coat finish,
borosilicate glass lens.

Options

Accessories

Description

Suffix

Lamp With clear lamp

Description

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Tamper Resistant Hardware

- TP

Catalog No.

Guard
Wire
Polycarbonate

L-WG
L-PG

Visor
IES Classification: Full Cut-Off

WLL-FC

•Silicone rubber gaskets.

SECURITY

•External hardware is stainless steel.
Easy Installation
•Installation is simplified with both cast in bosses for
3-1⁄2” or 4” outlet boxes and plugged entries for
1⁄2” conduit.
Socket
•Specification grade porcelain lampholder.

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting
MH-30°C, HPS -40°C

Dimensions
WMLM

FLOODLIGHTING

WLL

9”

SPECIALTY

18”

68

12-3/4”

9”
18”

9-3/4”

Dark Sky Full

Cut-Off Security Lighting
Lamp
Base

HIGHBAY

Lamp
Watts

Catalog Number

Metal Halide
DW50MH-volts
DW70MH-volts
DW100MH-volts
DW150MH-volts
DW175MH-volts
DW250MH-volts
DW400MH-volts

Medium
”
”
“
Mogul
“
“

LOWBAY

50
70
100
150
175
250
400

High Pressure Sodium
DW

175W

250W

DW
Full Cut-Off Security Lighting
for Dark Sky Applications

Sculptured Profile
•Sculptured housing features molded highlights for an
aesthetically pleasing appearance.
Gasketed Glass Lens
•Ideal for areas of high vandalism. The tempered glass
lens is gasketed and secured mechanically eliminating
silicone sealants.

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts
120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V
480V

35W

50W

70W

100W

150W 175W

250W

400W

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

HP
HP
HP
HP
–
–
–

HP/MH
HP
HP
HP/MH
MH
MH
–

–
HP
HP
–
HP/MH
HP/MH
–

–
HP
HP
–
HP/MH
HP/MH
HP/MH

–
HP
HP
–
HP/MH
HP/MH
HP/MH

HP/MH
–
–
HP/MH
HP/MH
HP/MH
HP/MH

HP/MH
–
–
HP/MH
HP/MH
HP/MH
HP/MH

–
–
–
–
MH
MH
MH

Construction
•Die cast aluminum, bronze polyester powder coat finish,
tempered glass lens.

Lamp With clear lamp

Description

SECURITY

Options

•External hardware is stainless steel.

Suffix

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide

Side Hinged Door
•Side hinged to free up both hands during relamping, the
door is keyed to prevent accidental removal.

•Silicone rubber gaskets.

DW70HP-volts
DW100HP-volts
DW150HP-volts
DW250HP-volts
DW400HP-volts

Medium
”
”
Mogul
”

PARKING & CANOPY

“Dark Sky” Cut-Off
•Meets IES Full Cut-Off requirements. Designed for use
where dark sky requirements are in force.

70
100
150
250
400

COMMERCIAL & RETAIL

DW

Suffix

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Tamper Resistant Hardware

- TP

AREA

Easy Installation
•Bosses for 3-1/2” or 4” outlet boxes, three 1/2” conduit
entries.
Socket
•Specification grade porcelain lampholder.
Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Dimensions
H

D

W

50W - 175W
250W -400W

9”
9

13-1/4”
13-3/4

11-1/2”
17-1/2

FLOODLIGHTING

DW

H

W

D

SPECIALTY
69

NEW

Cut-Off Security Lighting

HIGHBAY

Polaris Full

Lamp
Watts

Lamp
Base

Catalog Number
Wide Beam

Catalog Number
Forward Throw

Catalog Number
Up / Down

DR50MH-volts
DR70MH-volts
DR100MH-volts
DR150MH-volts

DR50MH-volts-FT
DR70MH-volts-FT
DR100MH-volts-FT
DR150MH-volts-FT

DR50MH-volts-UD
DR70MH-volts-UD
DR100MH-volts-UD
DR150MH-volts-UD

DR175MH-volts

DR175MH-volts-FT

DR175MH-volts-UD

DR50HP-volts-FT
DR70HP-volts-FT
DR100HP-volts-FT
DR150HP-volts-FT

DR50HP-volts-UD
DR70HP-volts-UD
DR100HP-volts-UD
DR150HP-volts-UD

DR42CF-UN-FT

DR42CF-UN-UD

Pulse Start Metal Halide

LOWBAY

50
70
100
150

Medium
Medium
Medium
Medium

Metal Halide

COMMERCIAL & RETAIL

175
DR

DR

Full Cut-Off

Up / Down Style (bottom view)

High Pressure Sodium
50
70
100
150

DR
Decorative Security
and Accent Lighting

PARKING & CANOPY

“Up-Down” Optics
•Optional Up/Down optics are available to accent
facade and highlight the buildings features.

SECURITY

“Easy-Install” Mounting
•Mount the bracket to a standard 3-1/2” or 4” junction
box. Using the built-in level, align the bracket and
secure it. Hang the luminaire and secure with two heavy
duty set screws
Construction
•Heavy duty die cast aluminum housing, bronze
polyester powder coat finish, borosilicate glass lens.
•Concealed cover screws secure the door assembly.
•Silicone rubber gaskets.

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting
MH-30°C, HPS -40°C

DR42CF-UN

GX24q

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts

Suffix

Magnetic Ballast
120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V
480V
Electronic Ballast
120V through 277V

26W 32W 42W

50W

70W

100W 150W 175W
–
–
HP
HP
HP
HP
–
–
HP/MH HP/MH
HP/MH HP/MH
HP/MH HP/MH

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

–
–
–
–
–
–
–

–
–
–
–
–
–
–

–
–
–
–
–
–
–

HP
HP
HP
HP
–
–
–

HP/MH
HP
HP
HP/MH
MH
MH
–

–
HP
HP
–
HP/MH
HP/MH
–

- UN

CF

CF

CF

–

–

–

Options
Description

Suffix

Lamp With clear lamp

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Tamper Resistant Hardware
Color

Standard
Optional

- TP
Bronze
Black
White

Designer Colors

FLOODLIGHTING

35W

No Suffix
- BL
- WH

Consult Factory

Dimensions
DR

W1

W2

D

H

W2

SPECIALTY

H
W1

70

–

–

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide, CF – Compact Fluorescent

•External hardware is stainless steel.
Socket
•Specification grade medium base porcelain lampholder.

DR50HP-volts
DR70HP-volts
DR100HP-volts
DR150HP-volts

Medium
Medium
Medium
Medium

Compact Flourescent
42

“Dark Sky” Half Sphere Styling
•Half round luminaire with downlight optics meets IES
Full Cut-Off standards.

Medium

D

Width
@ Bottom

Width
@ Top

Diameter

Height

18-1/8”

17-3/4”

9-1/4”

7-1/8”

–
–
–
–
MH
MH
MH
–

Polaris Full

NEW

Cut-Off Security Lighting
Lamp
Base

Catalog Number
Wide Beam

HIGHBAY

Lamp
Watts

Catalog Number
Forward Throw

Pulse Start Metal Halide
50
70
100
150

Medium
Medium
Medium
Medium

DT50MH-volts-FT
DT70MH-volts-FT
DT100MH-voltS-FT
DT150MH-volts-FT

DT175MH-volts

DT175MH-volts-FT

DT50HP-volts
DT70HP-volts
DT100HP-volts
DT150HP-volts

DT50HP-volts-FT
DT70HP-volts-FT
DT100HP-voltS-FT
DT150HP-volts-FT

DR42CF-UN

DR42CF-UN-FT

LOWBAY

DT50MH-volts
DT70MH-volts
DT100MH-volts
DT150MH-volts

Metal Halide
175
DT

DT
Decorative Security
and Accent Lighting

“Easy-Install” Mounting
•Mount the bracket to a standard 3-1/2” or 4” junction
box. Using the built-in level, align the bracket and
secure it. Hang the luminaire and secure with two heavy
duty set screws
Construction
•Heavy duty die cast aluminum housing, bronze polyester
powder coat finish, borosilicate glass lens.

Medium
Medium
Medium
Medium

Compact Flourescent
42

GX24q

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts

Suffix

Magnetic Ballast
120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V
480V

26W 32W 42W

35W

50W

70W

100W 150W 175W
–
–
HP
HP
HP
HP
–
–
HP/MH HP/MH
HP/MH HP/MH
HP/MH HP/MH

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

–
–
–
–
–
–
–

–
–
–
–
–
–
–

–
–
–
–
–
–
–

HP
HP
HP
HP
–
–
–

HP/MH
HP
HP
HP/MH
MH
MH
–

–
HP
HP
–
HP/MH
HP/MH
–

- UN

CF

CF

CF

–

–

–

•Silicone rubber gaskets.

Electronic Ballast
120V through 277V

•External hardware is stainless steel.

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide, CF – Compact Fluorescent

Socket
•Specification grade medium base porcelain lampholder.

Options

Ballasts
•HPF ballasts are suitable for low temperature starting
MH-30°C, HPS -40°C

Description

–

–

–
–
–
–
MH
MH
MH

SECURITY

•Concealed cover screws secure the door assembly.

50
70
100
150

PARKING & CANOPY

“Dark Sky” Trapezoidal Styling
•Trapezoidal luminaire with downlight optics meets IES
Full Cut-Off standards.

High Pressure Sodium

COMMERCIAL & RETAIL

Trapezoidal

Medium

–

Suffix

Lamp With clear lamp

-L

Tamper Resistant Hardware
Color

AREA

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
- TP

Standard
Optional

Bronze
Black
White

Consult Factory

FLOODLIGHTING

Designer Colors

No Suffix
- BL
- WH

Dimensions
DR

W1

W2

D1

D2

H

W2

D2

16-3/4”

14-3/4”

9-1/4”

5-1/2”

7-1/8”

H
D1

SPECIALTY

W1

71

HIGHBAY

Architectural Luminaires™

Perimeter/Horizontal Cut-Off, Floodlight

Lamp
Watts

Base

Catalog Number

Perimeter Cut-Off
Metal Halide
50
70

Horizontal Cut-Off

LOWBAY

Perimeter Cut-Off

AL50MH-volts-PK
AL70MH-volts-PK

Medium
”

High Pressure Sodium
35
50
70

AL35HP-volts-PK
AL50HP-volts-PK
AL70HP-volts-PK

Medium
”
”

COMMERCIAL & RETAIL

Floodlight

Horizontal Cut-Off
Metal Halide

AL

50
70

35 to 150 Watt
Architectural Floodlight

High Pressure Sodium

PARKING & CANOPY

Versatile
• Models for building perimeter security lighting, facade
floodlighting, sign lighting, wall washing, accent,
walkway lighting and a multitude of other uses.
• Standard bronze or choose custom designer colors.
• Specification grade lampholder, medium base lamps,
metal halide, high pressure sodium or compact fluorescent.

SECURITY

AL35HP-volts-HC
AL50HP-volts-HC
AL70HP-volts-HC

Medium
”
”

Compact Fluorescent

CFT13W/GX23

1 X 13W

• Choose Perimeter Cut-Off or Horizontal Cut-Off models.
• Die cast aluminum housing, a molded polycarbonate
lens. Mounts over recessed junction box with closed cell
neoprene gasket.

Metal Halide

Aiming
• Internal light shields control down light distribution pattern,
prevent light spill, minimize glare. Internal reflectors
assure positive light control. Shrouds eliminate unwanted
spill light. Shield protects the polycarbonate lens.

High Pressure Sodium

Ballasts
• Thermal barrier separates the ballast which reduces the
operating temperature for longer component life.
• Perimeter Cut-Off: available with 120V MH or 120V
reactor HPS ballasts only.
• Horizontal Cut-Off: available with 120V or 277V
single voltage ballasts.

AREA

35
50
70

AL113PL-volts-HC
Floodlight

Cut-Off Models

50
70
100

AL50MH-volts-FL
AL70MH-volts-FL
AL100MH-volts-FL

Medium
”
”

35
50
70
100
150

AL35HP-volts-FL
AL50HP-volts-FL
AL70HP-volts-FL
AL100HP-volts-FL
AL150HP-volts-FL

Medium
”
”
”
”

Compact Fluorescent

CFT13W/GX23

1 X 13W

AL113PL-120-FL

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.

Floodlight
• Mount indoors or outdoors. Die cast aluminum housing,
micro stipple heat resistant glass lens, head swivels to aim
in both the horizontal and vertical orientations.
Ballast
• Mounted in separate housing for very cool operation and
longer component life.
• 35W-100W HPS & 50-100W MH: available with 120V
or 277V ballasts.
• 150W HPS: available with reactor ballasts.

FLOODLIGHTING

AL50MH-volts-HC
AL70MH-volts-HC
Horizontal Cut-Off

Medium
”

Volts

Suffix

120V
120V Reactor NPF
120V Reactor HPF
277V
347V

- 120
- 120NP
- 120R
- 277
- 347

Perimeter Cut-Off

Horizontal Cut-Off

Floodlight

13W

35-70W

13W

35-70W

13W

35-100W

150W

CF
–
–
–
–

MH
HP
HP
–
–

CF
–
–
–
–

MH/HP
HP
HP
MH/HP
MH/HP

CF
–
–
–
–

MH/HP
HP
HP
MH/HP
MH/HP

–
HP
HP
–
–

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide, CF Compact Fluorescent

Dimensions
Perimeter Cut-Off

Floodlight

Horizontal Cut-Off

SPECIALTY

10-3⁄16”
5-5⁄8”
6”
6-1⁄8”
10-1⁄8”
72

8-1⁄4”
5-9⁄16”

11”
(Max.)

Two 1⁄2” entries
(front & bottom)
and pattern for
outlet box

10-5⁄16”
7-3⁄8”

4-7⁄8”

EWM Series™

Economy Security Lighting
Catalog Number
with Lamp*

Volts

HIGHBAY

Lamp
Watts

Catalog Number
with Lamp & Photocontrol*

HighPressure
PressureSodium
Sodium
High
35
50
70

120
120
120

EWM35HP-120NP-L ‡
EWM50HP-120NP-L ‡
EWM70HP-120NP-L ‡

EWM35HP-120NP-L-PC ‡
EWM50HP-120NP-L-PC ‡
EWM70HP-120NP-L-PC ‡

LOWBAY

Compact Fluorescent
42

EWM42CF-UN-L †

EWM42CF-UN-L-PC †

* Furnished with North American lamp and North American ballast.
‡ Suffix “-120NP” = 120V NPF magnetic ballast
† Suffix “-UN” = Compact Fluorescent only – Universal 120 thru 277V electronic ballast

COMMERCIAL & RETAIL

EWM

120 thru 277

EWM
Wall-LuxTM
Wall Mounted Security Lighting

Description

Color

Suffix

Bronze Standard
White - WH

PARKING & CANOPY

Construction
• Polycarbonate lens/cover.
•Cast aluminum mounting plate.
•Bronze finish. Optional White

Options

Dimensions
SECURITY

EWM

5-3⁄16”

6-7⁄8”

11”

AREA
FLOODLIGHTING
SPECIALTY
73

HIGHBAY

EWM Series™

Economy Security Lighting

Lamp
Watts

Catalog Number
with Lamp*

Catalog Number
with Lamp & Photocontrol*

High Pressure Sodium
JJ35HP-120NP-L
JJ50HP-120NP-L

LOWBAY

35
50

JJ35HP-120NP-L-PC
JJ50HP-120NP-L-PC

* Furnished with North American lamp and North American 120V NPF ballast.

COMMERCIAL & RETAIL

Dimensions
JJ

JJ

PARKING & CANOPY

Secur-LuxTM
Wall Mounted Security Lighting
North American Components
• Superior quality and reliability of a North American
lamp and ballast.

SPECIALTY

FLOODLIGHTING

AREA

SECURITY

Construction
• Polycarbonate cylindrical lens/cover. Cast aluminum
mounting plate. Bronze finish.

74

JJ
6-7⁄8”

5”

8-3⁄4”

TwiLiter

Economy Security Lighting

HIGHBAY

Lamp
Watts

NEW

Catalog Number
With Photocontrol

Base

Mercury Vapor
175

TW175MV-120-L-PC

Mogul

LOWBAY

High Pressure Sodium
70
100
150

TW70HP-120NP-L-PC
TW100HP-120NP-L-PC
TW150HP-120NP-L-PC

Mogul
“
“

COMMERCIAL & RETAIL

TW
Dusk to Dawn

TW
Dusk to Dawn Lighting

PARKING & CANOPY

Dusk to Dawn Operation
•Security lighting for farm, home, retail, commercial and
industrial applications. Automatic, switches on at dusk,
shuts off at dawn.
Energy Efficient, Economical
•Available with energy efficient high pressure sodium
lamps for low operating costs or inexpensive mercury
vapor for low initial costs.

Dimensions
TW

SECURITY

Security
•Welcomes visitors, discourages intruders for a safer,
more secure environment.
Durable
•One piece die cast aluminum body will not rust.
Furnished with a natural finish.
Easy Installation
•Mounts on structurally sound material or clamps to
conduit.

14-5⁄8”

AREA

10”
12-3⁄4”

FLOODLIGHTING
SPECIALTY
75

HIGHBAY

Area Lighting

Parking Lots, Roadways, Large Outdoor Area and Decorative Walkways
Aries - Vertical Lamp Downlight
LOWBAY

High efficiency vertical lamp optics reduces number of fixtures required by producing high levels of uniform illumination and
wide fixture spacings. IES Type V Symmetric and Type IV Forward Throw Distributions

COMMERCIAL & RETAIL

Available with full range of mounting brackets for existing or new poles

AVR

AVP

AVS

Poles

Aberdeen & Main Street - Decorative Street Lighting

PARKING & CANOPY

Four styles and choice of designer colors. Optional side louver with second lamp for higher illumination requirements

SECURITY

ASA1

ASA3

ASA2

ASA1

ASA1

Quasar - Horizontal Lamp “Shoe Box”
NEMA Type II Roadway, Type III Asymmetric, Type IV, and Forward Throw Distributions

AREA

Available with bracket, yoke or slipfitter mountings

Poles

FLOODLIGHTING

CSB / FT

Parklume - Decorative Walkway Bollards

SPECIALTY

Four styles and choice of designer colors. Optional side louver with second lamp for higher illumination requirements

PL8
76

Aries™

Parking Lot, Roadway and Area Lighting

ANSI
Type

HIGHBAY

Lamp
Watts

Catalog Number
Order Mounting Bracket Separately
See Page 80

Lamp
Shape

AVR Series IES Type V, Cut-Off

Pulse Start Metal Halide
M135
M144

ED37/BT37
ED37/BT37

AVR400MH-(volts)-PSB-R5
AVR450MH-(volts)-PSB-R5

ED37/BT37

AVR400MH-(volts)-R5

LOWBAY

400
450

Metal Halide
400

M59

COMMERCIAL & RETAIL

AVR
High Pressure Sodium
400

S51

AVR400HP-(volts)-R5

ED18

AVR
Area Downlighting
IES Type V, Cut-Off

Lens Assembly
• High heat tolerant sag glass lens exceeds ANSI Spec
Z91.1 making it four times stronger than annealed glass.
• Lens is attached with heavy duty torsion springs.
Reflector Assembly
• One piece fully faceted reflector for rigidity, vibration
resistance and overall luminaire efficiency.

Finish
• Baked polyester powder coat. Standard dark bronze.
Corporate colors, pin striping and decorative detailing
effects are available.

Ballasts
• HPF ballasts are suitable for low temperature starting.
• MH -30°C, Pulse Start MH -40, HPS -40°C

- QT
- TT
- 120
- 208
- 240
- 277
- 347
- 480

PS †
PS †
–
–
–
–
–
PS †

HP/MH
HP/MH
–
–
–
–
–
–

750W
S-111

875W
M166

PS †
PS †
–
–
–
–
–
PS †

–
–
HP
HP †
HP †
HP
HP
HP †

PS †
PS †
–
–
–
–
–
PS †

1000W 1000W
M-47/S-52 M141
HP/MH
HP/MH
–
–
–
–
–
–

–
–
PS
PS †
PS †
PS
PS
PS †

Note: Indicates available ballasts: HP – High Pressure Sodium, PS – Pulse Start Metal Halide∆, MH – Metal Halide
120, 277, 347line to ground voltages recommended,
∆ Pulse Start CWA only
† 208V, 240V & 480V CWA only

Options
Description

Suffix

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others

- PCR

Flat Glass Lens

- FG

House Side Shield

- HS

Color

Bronze Standard
Black - BL
White - WH

FLOODLIGHTING

Socket
• Specification grade porcelain lampholder.

120/208/240/277V
120/277/347V
Single Voltage 120
“
208
“
240
“
277
“
347
“
480

450W
M-144

AREA

Mounting
• A complete range of mounting brackets is available for
new or existing poles.

400W 400W
M-135 M-59/S-51

SECURITY

Construction
• Heavy gauge rolled aluminum.
• All Aries™ luminaires feature continuous welded seams
and internal reinforcing splines for ballast and mounting
bracket attachment.

Suffix
Volts

PARKING & CANOPY

Vertical Lamp
• Aries™ luminaires are designed to take advantage of
the performance benefits of vertical metal halide lamps.
Standard probe start and pulse start metal halide lamps
are designed for optimum performance in specific
operating positions. Published data shows that vertical
burning lamps have higher initial lumens, higher mean
light levels and longer lamp life than the same lamp
operating in a non-vertical position.

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.

Dimensions
AVR

Pole Drilling Pattern
For “bolt-on”
brackets listed
on page 56

EPA: 2.15
plus mounting
bracket

21-1⁄4”
4” 5”

4 holes 7⁄16”
cL hole 1”

14”

17-1⁄2”

SPECIALTY

3”
4”

77

Parking Lot, Roadway and Area Lighting

HIGHBAY

Aries™

Lamp
Watts

ANSI
Type

Catalog Number
Order Mounting Bracket Separately
See Page 81

Lamp
Shape

AVS Series IES Type V, Cut-Off

Pulse Start Metal Halide

LOWBAY

400
450
875
1000

M135
M144
M166
M141

ED37/BT37
ED37/BT37
ED37/BT37
ED37/BT37

AVS400MH-(volts)-PSB-R5
AVS450MH-(volts)-PSB-R5
AVS875MH-(volts)-PSB-R5
AVS1000MH-(volts)-PSB-R5

ED37/BT37
ED37/BT37

AVS400MH-(volts)-R5
AVS1000MH-(volts)-R5

COMMERCIAL & RETAIL

AVS

PARKING & CANOPY

Metal Halide

Vertical Lamp
• Aries™ luminaires are designed to take advantage of
the performance benefits of vertical metal halide lamps.
Standard probe start and pulse start metal halide lamps
are designed for optimum performance in specific
operating positions. Published data shows that vertical
burning lamps have higher initial lumens, higher mean
light levels and longer lamp life than the same lamp
operating in a non-vertical position.

AVS

400
1000

M59
M47

High Pressure Sodium

Area Downlighting
IES Type V, Cut-Off

SECURITY

Construction
• Heavy gauge die formed aluminum.
• All Aries™ luminaires feature continuous welded seams
and internal reinforcing splines for ballast and mounting
bracket attachment.
Lens Assembly
• High heat tolerant sag glass lens exceeds ANSI Spec
Z91.1 making it four times stronger than annealed glass.
• Hinged and gasketed lens assembly.
Reflector Assembly
• One piece fully faceted reflector for rigidity, vibration
resistance and overall luminaire efficiency.

AREA

Mounting
• A complete range of mounting brackets is available for
new or existing poles.

FLOODLIGHTING

Finish
• Baked polyester powder coat. Standard dark bronze.
Corporate colors, pin striping and decorative detailing
effects are available.
Socket
• Specification grade porcelain lampholder.
Ballasts
• HPF ballasts are suitable for low temperature starting.
• MH -30°C, Pulse Start MH -40, HPS -40°C

400
750
1000

S51
S111
S52

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Suffix

400W
M-135/M-59/S-51

450W
M-144

750W†
S-111

875W
M166

- QT
- TT
- 120
- 208
- 240
- 277
- 347
- 480

HP/MH/PS
HP/MH/PS
–
–
–
–
–
–

PS
PS
–
–
–
–
–
–

–
–
HP
HP
HP
HP
HP
HP

PS
PS
–
–
–
–
–
PS

Volts
120/208/240/277V
120/277/347V
Single Voltage 120
“
208
“
240
“
277
“
347
“
480

HP/MH
HP/MH
–
–
–
–
–
–

–
–
PS
PS
PS
PS
PS
PS

Options
Description

Suffix

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others

- PCR

Flat Glass Lens

- FG

House Side Shield

- HS

Color

Bronze Standard
Black - BL
White - WH

Dimensions
AVS

Pole Drilling Pattern

4” 5”

4 holes 7⁄16”
cL hole 1”

20”

EPA: 2.20
plus mounting
bracket

20”
14”

3”
4”

SPECIALTY

1000W† 1000W†
M-47/S-52 M141

Note: Indicates available ballasts: HP – High Pressure Sodium, PS – Pulse Start Metal Halide∆, MH – Metal Halide
120, 277, 347line to ground voltages recommended,
∆ Pulse Start CWA only
† 750W & 1000W – 208V, 240V & 480V CWA only

For “bolt-on”
brackets listed
on page 56

78

AVS400HP-(volts)-R5
AVS750HP-(volts)-R5
AVS1000HP-(volts)-R5

ED18
ED37/BT37
ED37/BT37

171⁄2”

Aries™

Parking Lot, Roadway and Area Lighting
ANSI
Type

HIGHBAY

Lamp
Watts

Catalog Number
Order Mounting Bracket Separately
See Page 81

Lamp
Shape

AVP Series IES Type IV

Pulse Start Metal Halide
M135
M144
M166
M141

ED37/BT37
ED37/BT37
ED37/BT37
ED37/BT37

AVP400MH-(volts)-PSB-FT
AVP450MH-(volts)-PSB-FT
AVP875MH-(volts)-PSB-FT
AVP1000MH-(volts)-PSB-FT

ED37/BT37
ED37/BT37

AVP400MH-(volts)-FT
AVP1000MH-(volts)-FT

LOWBAY

400
450
875
1000

Metal Halide
400
1000

AVP
Area Perimeter Lighting
Nema IV

Lens Assembly
• High heat tolerant sag glass lens exceeds ANSI Spec
Z91.1 making it four times stronger than annealed glass.
• Hinged and gasketed lens assembly.
Reflector Assembly
• One piece fully faceted reflector for rigidity, vibration
resistance and overall luminaire efficiency.

S51
S111
S52

AVP400HP-(volts)-FT
AVP750HP-(volts)-FT
AVP1000HP-(volts)-FT

ED18
ED37/BT37
ED37/BT37

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Suffix

400W
M-135/M-59/S-51

450W
M-144

750W†
S-111

875W
M166

- QT
- TT
- 120
- 208
- 240
- 277
- 347
- 480

HP/MH/PS
HP/MH/PS
–
–
–
–
–
–

PS
PS
–
–
–
–
–
–

–
–
HP
HP
HP
HP
HP
HP

PS
PS
–
–
–
–
–
PS

Volts
120/208/240/277V
120/277/347V
Single Voltage 120
“
208
“
240
“
277
“
347
“
480

1000W† 1000W†
M-47/S-52 M141
HP/MH
HP/MH
–
–
–
–
–
–

–
–
PS
PS
PS
PS
PS
PS

Note: Indicates available ballasts: HP – High Pressure Sodium, PS – Pulse Start Metal Halide∆, MH – Metal Halide
120, 277, 347line to ground voltages recommended,
∆ Pulse Start CWA only
† 750W & 1000W – 208V, 240V & 480V CWA only

SECURITY

Construction
• Heavy gauge die formed aluminum.
• All Aries™ luminaires feature continuous welded seams
and internal reinforcing splines for ballast and mounting
bracket attachment.

400
750
1000

PARKING & CANOPY

Vertical Lamp
• Aries™ luminaires are designed to take advantage of
the performance benefits of vertical metal halide lamps.
Standard probe start and pulse start metal halide lamps
are designed for optimum performance in specific
operating positions. Published data shows that vertical
burning lamps have higher initial lumens, higher mean
light levels and longer lamp life than the same lamp
operating in a non-vertical position.

High Pressure Sodium

COMMERCIAL & RETAIL

AVP

M59
M47

Options
Description

Suffix

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others
Flat Glass Lens

Finish
• Baked polyester powder coat. Standard dark bronze.
Corporate colors, pin striping and decorative detailing
effects are available.

Color

- PCR
- FG

House Side Shield

AREA

Mounting
• A complete range of mounting brackets is available for
new or existing poles.

- HS
Bronze Standard
Black - BL
White - WH

Dimensions

Ballasts
• HPF ballasts are suitable for low temperature starting.
• MH -30°C, Pulse Start MH -40, HPS -40°C

AVP

FLOODLIGHTING

Socket
• Specification grade porcelain lampholder.

Pole Drilling Pattern

19”

20”

EPA: 2.65
plus mounting
bracket
12”
18-1⁄2”

For “bolt-on”
brackets listed
on page 56

4” 5”

4 holes 7⁄16”
cL hole 1”

SPECIALTY

3”
4”

79

HIGHBAY

Aries™
AVR
Mounting Flexibility

LOWBAY

Mounting Flexibility
•Aries™ luminaires are designed for a wide range of
mounting configurations. Aries™ is suitable for both
new and existing pole locations. Aries™ uses rigid four
point luminaire attachments for maximum strength in
both tenon and direct to pole mounting arrangements.

COMMERCIAL & RETAIL

Aries™ Pole Selection Guide
•While there are many factors to consider in the
selection of new or in the use of existing poles to mount
luminaires such as the Aries™, some factors for
maximum safety:
•Ensure that the total luminaire and accessory weight
and the E.P.A. loading requirement for each lighting
standard is compatible with the pole manufacturers
recommendations. Consult your pole supplier.

PARKING & CANOPY

•Consider the maximum anticipated wind velocities at
the site of the proposed installation. Coordinate with
the pole manufacturers specifications to ensure that
the selected pole complete with luminaires and
brackets have the design capability to withstand the
effects of the projected wind velocities.
•The size, depth and construction of the pole
foundation plays a critical role in the safety of outdoor
lighting installations. For maximum safety, a qualified
professional engineer should be consulted to review
the proposed pole locations, conduct a soil evaluation
and design a base suitable for the pole and luminaires to be installed.

SECURITY

•In areas where poles may be subject to damage from
vehicular traffic, maintenance vehicles and normal
parking errors, the pole base should be protected with
concrete piers or other protective barriers.

FLOODLIGHTING

AREA

Mounting Brackets
• Mounting brackets for Aries™ luminaires are ordered
and shipped separately.
•

Direct to Pole: Square pole brackets fit 4” X 4” or
larger square poles.

•

Tenon Mounting: Tenon mounting brackets are ordered
to suit the pole top tenon size of new or existing poles.

•

For new installations, consider luminaire quantities,
overall weight, and total EPA requirements when
selecting the pole tenon size. This catalog lists the two
most common tenon sizes, 2” and 2-1/2”.

•

The 2-1/2” tenon is suggested for three and four light
clusters.

•

Larger tenon sizes are available. Consult factory
to order.

Mounting Brackets
Tenon Mount for AVR
Single – Tenon
Model: AVR
E.P.A.: 0.30
Arm: 8”

AVS-S-AM8-color
Tenon: 2-1/2”
Weight: 12.0 lb

AVR-T25-S8-color
Double – Tenon
Model: AVR
E.P.A.: 0.45
Arms: 8”

Tenon: 2-1/2”
Weight: 19.0 lb

AVR-T25-D8-color
Triple – Tenon
Model: AVR
E.P.A.: 0.65
Arms: 12”

Tenon: 2-1/2”
Weight: 25.0 lb

AVR-T25-T12-color

Single – Direct to Pole
Model: AVR
E.P.A.: 0.20
Arm: 8”

Pole: Square
Weight: 4.5 lb

AVR-S-AM-8-color
“Z” Bracket
– Direct to Pole
Models: AVS & AVP
E.P.A.: 0.70
Pole: 4”, 5”,
6” Square
Weight: 10.3 lb

AVS-S-Z-color
‘Y’ Bracket
– Direct
to Pole
Model: AVS
E.P.A.: 2.50

Pole: 4” Square
Weight: 41.0 lb

AVS-4S-Y-color
Quadruple – Tenon
Model: AVR
E.P.A.: 0.80
Arms: 12”

Pole: 5” Square
Weight: 40.0 lb

AVS-5S-Y-color
Pole: 6” Square
Weight: 39.0 lb

AVS-6S-Y-color

Tenon: 2-1/2”
Weight: 31.0 lb

AVR-T25-Q12-color

Note: Coordinate
luminaire and
bracket color

SPECIALTY

Single – Direct to Pole
Models: AVS & AVP
E.P.A.: 0.20
Arm: 8”
Pole: Square
Weight: 4.5 lb

Color
Bronze No suffix(Standard)
Black-BL White-WH
Designer Color
Consult Factory

80

Direct to Pole

Uni-Directional Twin
– Direct to Pole
Model: AVP
E.P.A.:
0.80 (pair)
Arms: 8”

Pole: 4” Square
5” Square
6” Square
Weight: 21.0 lb (pair)

AVP-S-CL90-color
Left & Right Bracket included

Aries™
Mounting Flexibility

•Ensure that the total luminaire and accessory weight
and the E.P.A. loading requirement for each lighting
standard is compatible with the pole manufacturers
recommendations. Consult your pole supplier.

•The size, depth and construction of the pole
foundation plays a critical role in the safety of outdoor
lighting installations. For maximum safety, a qualified
professional engineer should be consulted to review
the proposed pole locations, conduct a soil evaluation
and design a base suitable for the pole and luminaires to be installed.

Mounting Brackets
• Mounting brackets for Aries™ luminaires are ordered
and shipped separately.
Direct to Pole: Square pole brackets fit 4” X 4” or
larger square poles.

•

Tenon Mounting: Tenon mounting brackets are ordered
to suit the pole top tenon size of new or existing poles.

•

For new installations, consider luminaire quantities,
overall weight, and total EPA requirements when
selecting the pole tenon size. This catalog lists the two
most common tenon sizes, 2” and 2-1/2”.
The 2-1/2” tenon is suggested for three and four light
clusters.

•

Larger tenon sizes are available. Consult factory
to order.

Tenon: 2-1/2”
Weight: 12.0 lb

AVS-T25-S8-color
Double – Tenon
Models: AVS & AVP
E.P.A.: 0.45
Arms: 8”

Tenon: 2-1/2”
Weight: 19.0 lb

AVS-T25-D8-color
Triple – Tenon
Models: AVS & AVP
E.P.A.: 0.65
Arms: 12”

Tenon: 2-1/2”
Weight: 25.0 lb

AVS-T25-T12-color

Single – Direct to Pole
Model: AVR
E.P.A.: 0.20
Arm: 8”

Pole: Square
Weight: 4.5 lb

AVR-S-AM-8-color
“Z” Bracket
– Direct to Pole
Models: AVS & AVP
E.P.A.: 0.70
Pole: 4”, 5”,
6” Square
Weight: 10.3 lb

AVS-S-Z-color
‘Y’ Bracket
– Direct
to Pole
Model: AVS
E.P.A.: 2.50

Pole: 4” Square
Weight: 41.0 lb

AVS-4S-Y-color
Quadruple – Tenon
Models: AVS & AVP
E.P.A.: 0.80
Arms: 12”

Pole: 5” Square
Weight: 40.0 lb

AVS-5S-Y-color
Pole: 6” Square
Weight: 39.0 lb

AVS-6S-Y-color

Tenon: 2-1/2”
Weight: 31.0 lb

AVS-T25-Q12-color

Uni-Directional Twin
– Tenon
Model: AVP
E.P.A.: 0.80
Arms: 8”

Pole: 4” Square
5” Square
6” Square
Weight: 21.0 lb (pair)

AVP-S-CL90-color
Left & Right Bracket included

SPECIALTY

Tenon: 2-1/2”
Weight: 25.0 lb

Uni-Directional Twin
– Direct to Pole
Model: AVP
E.P.A.:
0.80 (pair)
Arms: 8”

FLOODLIGHTING

•

AVS-S-AM8-color

AREA

•

Pole: Square
Weight: 4.5 lb

SECURITY

•In areas where poles may be subject to damage from
vehicular traffic, maintenance vehicles and normal
parking errors, the pole base should be protected with
concrete piers or other protective barriers.

Single – Direct to Pole
Models: AVS & AVP
E.P.A.: 0.20
Arm: 8”

PARKING & CANOPY

•Consider the maximum anticipated wind velocities at
the site of the proposed installation. Coordinate with
the pole manufacturers specifications to ensure that
the selected pole complete with luminaires and
brackets have the design capability to withstand the
effects of the projected wind velocities.

Single – Tenon
Models: AVS & AVP
E.P.A.: 0.30
Arm: 8”

COMMERCIAL & RETAIL

Aries™ Pole Selection Guide
•While there are many factors to consider in the
selection of new or in the use of existing poles to mount
luminaires such as the Aries™, some factors for
maximum safety:

Direct to Pole

LOWBAY

Mounting Flexibility
•Aries™ luminaires are designed for a wide range of
mounting configurations. Aries™ is suitable for both
new and existing pole locations. Aries™ uses rigid four
point luminaire attachments for maximum strength in
both tenon and direct to pole mounting arrangements.

Tenon Mount for AVS/AVP

HIGHBAY

AVS , AVP

Mounting Brackets

AVP-T25-CL90-color

81

Quasar™
HIGHBAY

Parking Lot, Roadway and Area Lighting
Lamp
Watts

NEMA*

Bracket Mount

Slipfitter Mount

Yoke Mount

Metal Halide

LOWBAY

70
100
150
175
250
400∆
1000

CSB3-70MH-QT
CSB3-100MH-QT
CSB3-150MH-QT
CSB3-175MH-QT
CSB3-250MH-QT
CSB3-400MH-QT∆
CSB3-1000MH-QT

III
III
III
III
III
III
III

CSB3-70MH-QT-SF
CSB3-100MH-QT-SF
CSB3-150MH-QT-SF
CSB3-175MH-QT-SF
CSB3-250MH-QT-SF
CSB3-400MH-QT-SF∆
CSB3-1000MH-QT-SF

CSB3-70MH-QT-TR
CSB3-100MH-QT-TR
CSB3-150MH-QT-TR
CSB3-175MH-QT-TR
CSB3-250MH-QT-TR
CSB3-400MH-QT-TR∆
CSB3-1000MH-QT-TR

CSB3-70HP-QT-SF
CSB3-100HP-QT-SF
CSB3-150HP-QT-SF
CSB3-250HP-QT-SF
CSB3-400HP-QT-SF
CSB3-1000HP-QT-SF

CSB3-70HP-QT-TR
CSB3-100HP-QT-TR
CSB3-150HP-QT-TR
CSB3-250HP-QT-TR
CSB3-400HP-QT-TR
CSB3-1000HP-QT-TR

High Pressure Sodium
70
100
150
250
400
1000

COMMERCIAL & RETAIL

CSB
400W

CSB
IES II, III and IV

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

PARKING & CANOPY

Construction
•CSB: One piece die cast aluminum housing.
•Permanently attached hinged door is secured for
maximum weatherproof integrity.

SECURITY

Accessories

Description

Description

Suffix

IES Distribution
Catalog numbers with the prefix “CSB3-” have a NEMA
Type III distribution.

Optical Assembly
• Formed optical assembly available for NEMA II, III and
IV distributions.

For alternate distributions (max. 400W)
change CSB3 to...
Type II
Type IV

Tempered Glass Lens
• Available with clear flat glass lenses.

Lamp With clear lamp

•1000 watt fixtures are available with bracket and
slipfitter mounting .

CSB2CSB4-L

Pulse Start Luminaires
High Performance Metal Halide
For 250W, 400W, 1000W MH
For 50W, 70W, 100W, 150W
200W, 320W, 350W, 750W

Mounting
• Fixtures up to 400 watt are available with bracket, yoke
and slipfitter mounting.

- PSB
Standard

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)

Socket
• Specification grade porcelain lampholder.

Protected Igniter
for HPS Luminaires

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

AREA

* 70-400W: To select other NEMA Distributions see below (70W thru
400W only)
∆ 400W metal halide — use ED28 lamp

Options

Cool Operating
• Ballast is mounted directly to the cast housing for
maximum heat dissipation.

FLOODLIGHTING

CSB3-70HP-QT
CSB3-100HP-QT
CSB3-150HP-QT
CSB3-250HP-QT
CSB3-400HP-QT
CSB3-1000HP-QT

III
III
III
III
III
III

- BZ
- BL
- WH

Designer Colors

- Consult factory ‡

16-3/8”

23-3/4”

Wall Mounting
For slipfitter mounting fixtures
2” IPS (2 3/8) OD)

WB-1-BZ‡

For bracket mounting fixtures
Bolts to wall over outlet box
Arm is supplied with luminaire

CSB-WB-BZ‡

Max. 400W

‡ Note: When ordering optional colors, you must
specify the separate brackets with the special color.
ie CSB-WB-BZ and WB-1-BZ are bronze. Change
the “BZ” to indicate the new color.

Wall Brackets

CWB1-BZ
Mounting centers 12”
Slipfitter – 2” IPS (2-3/8” OD)

EPA: 2.70*

16-3/8”

23-3/4”

CSB-WB-BZ
Mounting centers – 3” X 4-1/8”
3”

7-3/8”

SPECIALTY

10-1/4”

Bracket Mount
Thru holes for 3/8” bolts

2”

3”

Wireway

4”
82

CSB-LS400
CSB-LS1000

- PI

Color
Bronze (Standard)
Black
White

CSB – Max 1000W

EPA: 1.28*

Vandal Shield
Lexan, with offset mounting kit
Max 400W models
1000W models

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

Dimensions
CSB – Max 400W

Catalog No.

Bracket
Mount
*Includes 1.2 drag factor

12”
Mtg. Ctr.

4-1/8”

Quasar™

Parking Lot, Roadway and Area Lighting
Bracket Mount

Slipfitter Mount

Yoke Mount

FT70MH-QT-SF
FT100MH-QT-SF
FT150MH-QT-SF
FT175MH-QT-SF
FT250MH-QT-SF
FT400MH-QT-SF∆
FT1000MH-QT-SF

FT70MH-QT-TR
FT100MH-QT-TR
FT150MH-QT-TR
FT175MH-QT-TR
FT250MH-QT-TR
FT400MH-QT-TR∆
FT1000MH-QT-TR

HIGHBAY

Lamp
Watts

Metal Halide

LOWBAY

FT70MH-QT
FT100MH-QT
FT150MH-QT
FT175MH-QT
FT250MH-QT
FT400MH-QT∆
FT1000MH-QT

70
100
150
175
250
400∆
1000

High Pressure Sodium

400W

FT
Forward Throw Area Lighting

FT70HP-QT-SF
FT100HP-QT-SF
FT150HP-QT-SF
FT250HP-QT-SF
FT400HP-QT-SF
FT1000HP-QT-SF

∆ 400W metal halide — use ED28 lamp

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Construction
•FT: One piece die cast aluminum housing.

Options

Cool Operating
• Ballast is mounted directly to the cast housing for
maximum heat dissipation.

Accessories

Description

Description

Suffix

Lamp With clear lamp

-L

Mounting
• Fixtures up to 400 watt are available with bracket, yoke
and slipfitter mounting.

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)

•1000 watt fixtures are available with bracket and
slipfitter mounting .

Protected Igniter
for HPS Luminaires

- PSB
Standard

- PI

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

Socket
• Specification grade porcelain lampholder.
Ballasts
• HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

- BZ
- BL
- WH

Designer Colors

- Consult factory ‡

CSB-LS400
CSB-LS1000

Wall Mounting
For slipfitter mounting fixtures
2” IPS (2 3/8) OD)

WB-1-BZ‡

For bracket mounting fixtures
Bolts to wall over outlet box
Arm is supplied with luminaire

CSB-WB-BZ‡

Max. 400W

AREA

Color
Bronze (Standard)
Black
White

Vandal Shield
Lexan, with offset mounting kit
Max 400W models
1000W models

SECURITY

Tempered Glass Lens
• Available with flat glass lenses.

Pulse Start Luminaires
High Performance Metal Halide
For 250W, 400W, 1000W MH
For 50W, 70W, 100W, 150W
200W, 320W, 350W, 750W

Optical Assembly
• Formed optical assembly for forward throw distribution.

Catalog No.

PARKING & CANOPY

•Permanently attached hinged door is secured for
maximum weatherproof integrity.

FT70HP-QT-TR
FT100HP-QT-TR
FT150HP-QT-TR
FT250HP-QT-TR
FT400HP-QT-TR
FT1000HP-QT-TR

COMMERCIAL & RETAIL

FT70HP-QT
FT100HP-QT
FT150HP-QT
FT250HP-QT
FT400HP-QT
FT1000HP-QT

70
100
150
250
400
1000

FT

‡ Note: When ordering optional colors, you must specify
the separate brackets with the special color.
ie CSB-WB-BZ and WB-1-BZ are bronze. Change the
“BZ” to indicate the new color.

CSB – Max 1000W

CSB – Max 400W
EPA: 1.28*

Wall Brackets

EPA: 2.70*

16-3/8”

16-3/8”

23-3/4”

FLOODLIGHTING

Dimensions
CWB1-BZ
Mounting centers 12”
Slipfitter – 2” IPS (2-3/8” OD)

23-3/4”

CSB-WB-BZ
Mounting centers – 3” X 4-1/8”
3”

7-3/8”
10-1/4”

2”

4-1/8”

SPECIALTY

Bracket Mount
Thru holes for 3/8” bolts

12”
Mtg. Ctr.

3”

Wireway

4”
*Includes 1.2 drag factor
83

HIGHBAY

Aberdeen™ Decorative Street & Area Lighting
To order construct the catalog number as follows

LOWBAY

AS A1 –175MH –QT –AN3 –(Options)
Architectural Street
& Area Lighting

AS

Series
Aberdeen

A1

Series
Pulse Start Metal Halide
Medium Base

70W
100W
150W

COMMERCIAL & RETAIL

ASA1

ED17
ED17
ED17

-70PS
-100PS
-150PS

ED23.5
ED28
ED28

-175PS
-200PS
-250PS

ED28
ED28

175MH
250MH

Mogul Base

175W
200W
250W

ASA1
With Fluted Cast Base
Maximum 250W

175W
250W

High Pressure Sodium

Mount

PARKING & CANOPY

Metal Halide
Mogul Base

•Tenon: 2-1/2” (2-7/8” OD) .
•Wall Bracket: 2-1/2” (2-7/8” OD) tenon.
Construction
•Cast housing.
•Base-down, mogul base lamp
Optics
•Prismatic acrylic globe.

Mogul Base

70W
100W
150W
250W

ED23.5
ED23.5
ED23.5
ED18

-70HP
-100HP
-150HP
-250HP

Volts
Quad Tap – 120V, 208V, 240V & 277V
Tri Tap – 120/277/347V
480V

-QT
-TT
-480

•Prismatic polycarbonate globe.

SECURITY

•Optional internal aluminum top reflector minimizes
uplight.
•IES Types III and V distribution.
Electrical
•Available lamps:
150, 175 & 250 watt metal halide.
70, 100, 150, 200 & 250 watt pulse start metal halide.
70, 100, 150, 200 & 250 watt high pressure sodium.

Optics
Acrylic
Polycarbonate

NEMA III
NEMA V

- AN3
- AN5

NEMA III
NEMA V

- PN3
- PN5

Options: See Below

AREA

Standard voltage:
•Quad Tap (USA) – 120V, 208V, 240V & 277V.
•Tri-Tap (Canada)– 120V, 277V & 347V.
•Optional: Single voltage – consult factory for availability.
Finish
•Polyester powder coat.

Options
Description

FLOODLIGHTING

Lamp

Dimensions

Internal Top Reflector

Aberdeen - Series A1

Color
16”

Designer Colors

Accessories
Suffix

Description

Clear -L
-TR
White -WH
Black -BL
Bronze -BZ
Consult Factory

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)

SPECIALTY

22-1/8”

Fuse

Single - 120V, 277V & 347V -F1
Double - 208V & 240V -F2
On multi-tap ballasts indicate line voltage

11-7/8”
11-1/8”

84

Poles

Catalog No.

See page 64

Wall Brackets
2-1/2” Tenon SA-WB1-25-(colour)
Finial

FINIAL1-(colour)

Aberdeen™ Decorative Street & Area Lighting
HIGHBAY

To order construct the catalog number as follows

AS A2 –175MH –QT –(Options)
Architectural Street
& Area Lighting

Max 175W
Max 250W

LOWBAY

Series
Aberdeen

AS

A2
A3

Series
Pulse Start Metal Halide
Medium Base

70W
ED17 ASA2 & ASA3
100W ED17 ASA2 & ASA3
150W ED17 ASA2 & ASA3
Metal Halide

ASA3

ASA2 & ASA3

-70PS
-100PS
-150PS

COMMERCIAL & RETAIL

ASA2

Mogul Base

175W
250W

With Fluted Cast Base
Maximum 175W & 250W

ED28 ASA2 & ASA3
ED28
ASA3

-175MH
-250MH

High Pressure Sodium
Mogul Base

•Wall Bracket: 2-1/2” (2-7/8” OD) tenon.
Construction
•Cast housing.

70W
100W
150W
250W

ED23.5 ASA2 & ASA3
ED23.5 ASA2 & ASA3
ED23.5 ASA2 & ASA3
ED18 ASA2 & ASA3

-70HP
-100HP
-150HP
-250HP

Volts
Quad Tap – 120V, 208V, 240V & 277V
Tri Tap – 120/277/347V
480V

•Base-down, mogul base lamp
Optics
•Polycarbonate globe.
•Optional internal glass refractors or louver.

PARKING & CANOPY

Mount
•Tenon: 2-1/2” (2-7/8” OD).

-QT
-TT
-480

Options: See Below

SECURITY

•Standard distribution is IES Type V. Optional internal
glass refractor is available for IES Types III and V
distribution.
Electrical
•Available lamps:
150 & 175 watt metal halide.
70, 100 & 150 watt pulse start metal halide.
70, 100 & 150 watt high pressure sodium.
Standard voltage:
•Quad Tap (USA) – 120V, 208V, 240V & 277V.

AREA

•Tri-Tap (Canada)– 120V, 277V & 347V.
•Optional: Single voltage – consult factory for availability.

Options

Finish
•Polyester powder coat.

Description

Lamp
Optics Glass Refractor

Aberdeen - Series A2 & A3

ASA2

Louver

ASA3

Color
16-1/2”

15-7/8”

Designer Colors
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others

23-3/4”

20”

Suffix

Description

Clear -L
NEMA III -GR3
NEMA V -GR5
-LV

Poles

Catalog No.

See page 64

Wall Brackets
2-1/2” Tenon SA-WB1-25-(colour)
Finial

FLOODLIGHTING

Dimensions

Accessories

FINIAL1-(colour)

White -WH
Black -BL
Bronze -BZ
Consult Factory

- PCR

Fuse

SPECIALTY

Single - 120V, 277V & 347V -F1
Double - 208V & 240V -F2
On multi-tap ballasts indicate line voltage

11-7/8”

11-7/8”
11-1/8”

11-1/8”
85

HIGHBAY

Main Street™ Decorative Street & Area Lighting
To order construct the catalog number as follows

LOWBAY

AS M1 –175MH –QT –LV –(Options)
Architectural Street
& Area Lighting

AS

Series
Main Street

M1

Series
Pulse Start Metal Halide

COMMERCIAL & RETAIL

Medium Base

ASM1

ASM1

Post Top Mounted

Wall Mounted

70W
100W
150W

ED17
ED17
ED17

-70PS
-100PS
-150PS

BD17
BD17

-150MH
-175MH

Metal Halide
Medium Base

ASM1

150W
175W

With Plain Cast Base
Maximum 175W

PARKING & CANOPY

Mount
•Tenon: 2” (2-3/8” OD).
•Wall Bracket: 2” ( 2-3/8” OD) tenon.
Construction
•Spun aluminum reflector.

High Pressure Sodium
Medium Base

70W
100W
150W

B17
B17
B17

-70HP
-100HP
-150HP

Volts
Quad Tap – 120V, 208V, 240V & 277V
Tri Tap – 120/277/347V
480V

-QT
-TT
-480

•Cast top and bottom housing.
•Stainless steel connecting rods.
•Fully gasketed.

SECURITY

Optics
•Clear acrylic cylindrical lens.
•Must be ordered with either specular internal louver or
glass refractor – see options.

Optics
Glass Refractor

NEMA III
NEMA V

Louver

-GR3
-GR5
-LV

Options: See Below

•Standard distribution with louver is IES Type V. Optional
internal glass refractor is available for IES Types III and V
distribution.

AREA

Electrical
•Available lamps:
150 & 175 watt metal halide.
70, 100 & 150 watt pulse start metal halide.
70, 100 & 150 watt high pressure sodium.

Options
Description

Lamp

Clear -L

Color

White -WH
Black -BL
Bronze -BZ

Standard voltage:
•Quad Tap (USA) – 120V, 208V, 240V & 277V.
•Tri-Tap (Canada)– 120V, 277V & 347V.
•Optional: Single voltage – consult factory for availability.

FLOODLIGHTING

Finish
•Polyester powder coat.

23-1/2”

SPECIALTY

Consult Factory

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Single - 120V, 277V & 347V -F1
Double - 208V & 240V -F2
On multi-tap ballasts indicate line voltage

Main Street - Series M1

86

Designer Colors

Fuse

Dimensions

26-3/4”

Accessories
Suffix

Description

Poles

Catalog No.

See page 64

Wall Brackets
2” Tenon SA-WB1-20-(colour)

Poles

Decorative Street & Area Lighting
HIGHBAY

To order construct the catalog number as follows

AP D –25 – A 1 –8-0 –WH- Options
Architectural
Series Pole

AP

Paris
Alma
Fergus
Elora
Dundee

30”
25”

20”

Fergus

P
A
F
E
D

Tenon Size
2” (2-3/8” OD)
2-1/2” (2-7/8” OD)

COMMERCIAL & RETAIL

Alma

Paris

LOWBAY

Base Style

- 20
- 25

Pole Material
Aluminum --A
Number of luminaires
One luminaire 1
Two luminaires 2

26”

PARKING & CANOPY

Pole Height
See Dimensions chart below
39”

Colour
White
Black
Bronze

25”

Elora

Dundee

Standard Poles From 8’ to 20’
Construction
•Round aluminum pole.
•Tenon: 2” (2-3/8” OD)

Dimensions
Model

Pole Dia.

Standard Pole Heights

Paris

APP

3-1/2”

Alma

APA

4”

Fergus

APF

3-1/2”

8’-0” 10’-8”

11’-8”

12’-8”

Elora

APE

3-1/2”

8’-0” 10’-8”

11’-8”

12’-8”

Dundee

APD

4”

8’-0” 10’-0”

12’-0”

15’-0” 18’-0” 20’0”

8’-0”

10’

8’-0” 10’-0”

12’
12’-0”

–

–

–

15’-0” 18’-0” 20’0”
–

–

AREA

2-1/2” (2-7/8” OD).

Options: See Below

SECURITY

AP Poles

- WH
- BL
- BZ

•Anchor bolts included.
•Dundee & Alma styles include straight pole & shroud.
Finish
•Polyester powder coat

Anchor Bolt & Bolt Circle Dia. (BCD)
Anchor
Bolt Dia.

Model

Bolt Circle
Dia.

Paris

APP

1/2”

Alma

APA

3/4”

7-1/2”

Fergus

APF

5/8”

12-1/2”

Elora

APE

5/8”

12-1/2”

Dundee

APD

3/4”

7-1/2”

9-1/2”

FLOODLIGHTING

Options
Description

Designer Colors

White -WH
Black -BL
Bronze -BZ

SPECIALTY

Colour

Suffix

Consult Factory

87

HIGHBAY

NEW

Poles

Square Steel

SSS , STS

Construct catalog number as follows

LOWBAY

Square Straight and
Square Tapered Steel Poles

COMMERCIAL & RETAIL

SSS4-20

-4U

Options

-BZ -DUP

Caution Pole Base/Anchor Bolts: When the customer uses his own template to install anchor
bolts, he assumes all responsibility for the installation of those anchor bolts.

•Shafts are of one piece construction with a full length longitudinal
high frequency electric resistance weld.

Mtg. Ht.
(Nom.)

Hand hole
•The reinforcing hand hole rim consists of a rectangular shaped
tubing. The opening is 2-1/2” X 5” (nominal).
•Hand holes are furnished with a steel attachment bar, steel cover
and one round head machine screw.
•Hand holes, located 18” above the base, are welded in the pole shaft.
Electrical Ground
•A nut holder is provided near the hand hole and includes a 1/2”13 UNC hex head bolt and nut.
Base Plate
•Fabricated from structural quality hot rolled carbon steel plate
conforming to ASTM A36.
•Circumferentially welded top and bottom, the base plate telescopes
the pole shaft.
•The pole chart information lists the bolt circle ranges for each pole.

The data found in these sheets is for reference only and is subject to change.
Square Straight Steel Pole
Square
Catalog No.*
4”

SSS4-10- *

–

–

12

4”

SSS4-12- *

–

–

14

4”

SSS4-14- *

–

–

16

4”

SSS4-16- *

–

–

18

4”

SSS4-18- *

–

–

4”

SSS4-20- *

5.25

STS20- *

20
25
30
35
39
40

5”

SSS5-20- *

–

4”

SSS4-25- *

6.00

Options

Anchor Bolts
•Fabricated from carbon steel bar conforming to AASHTO M314
Grade 55 or ASTM F1554 Grade-55.

5”

SSS5-25- *

–

–

5”

SSS5-30- *

6.41

STS30- *

6”

SSS6-30- *

6.41

STS30-HD- *

–

–

6.81

STS35- *

–

–

7.13

STS35-HD- *

–

–

7.13

STS39- *

–

–

8.75

STS39-HD- *

6”

SSS6-40- *

–

Finish

Description

•Four anchor bolts are furnished per pole. Each anchor bolt is
furnished with two hex nuts and two flat washers.

–
STS25-

–

* Indicate Tenon or Drilling Pattern

Base Cover
•A full base cover is standard with SSS Series poles.

•Bolts are galvanized a minimum of 12” on the threaded end.

Square Tapered Steel Pole
Square @ Base Catalog No.*

10

Suffix

Galvanized - GAL
Bronze (Powder) - BZ
Black (Powder) - BL
White (Powder) - WH

•Bolts have an “L” bend on one end.

AREA

Finish

Shaft
•Pole shafts are supplied in 11 gauge - 0.1196” (SSS: 10’ - 20’;
STS: 20 - 30’) or 7 gauge - 0.1793” (SSS: 25’ - 40’; STS: 30’HD 39’) thickness having a minimum yield strength of 55,000 psi and
conforms to ASTM A595 Grade A.

• STS Series (square tapered) pole shafts are square in cross section
with flat sides, rounded corners (0.75” per corner) and a uniform
taper of 0.11 inches per foot of length.

PARKING & CANOPY

Indicate Drilling Pattern or Tenon

See full brochure for EPA and weight requirements

• SSS Series (square) pole shafts are uniformly square in cross section
with flat sides, rounded corners (0.75” per corner) and no taper.

SECURITY

Catalog Number

Receptacle
Provision for a Duplex Receptacle
Receptacle not included

- DUP

Slipfitter Mounting

Mounting
Area Lighting Mounting

FLOODLIGHTING

Drilling Pattern - for Luminaires Bolted Direct to the Pole- Includes Top Cap
NOTE: EPA of Bracket and Luminaire(s) must be considered
when calculating pole load.
Luminaire bolts to pole
To order pole drilling
add suffix

SPECIALTY

- 1U

- SA1
EPA 0.3 – 8 LB

2 Luminaires
- 2U
EPA 1.0 – 21 LB.
2 Luminaires

1 Luminaire

-1E2

-1E34

2 Luminaires -2C2

- 2C34

-2L2

- 2L34

3 Luminaires
- 3U
EPA1.6 – 32 LB.

- SA2C
EPA 0.4 –11
- SA2L
EPA 0.4 –11
- SA3T
EPA 0.5 – 11 LB

3 Luminaires -3T2

- 3T34

- 3Y
EPA 1.3 - 34 LB.

- SA3Y
EPA 0.5 – 11 LB

4 Luminaires -4X2

- 4X34

4 Luminaires
- 4X
(@ 90°) EPA 1.6 - 44 LB.

- SA4X
EPA .6 – 18

Quasar (to 400W)
1 luminaire

88

Aries (All Lamps)
Quasar (1000W)

Add suffix to order mounting bracket. All brackets are 2” Tenon
NOTE: EPA of Bracket and Luminaire(s) must be considered when calculating pole load.
Bullhorn
Spoke Arm
Description
Suffix
Suffix

4 Luminaires
- 4U
(in line) EPA 2.3 – 44LB.

Poles

HIGHBAY

RTS

NEW

Round Steel
Construct catalog number as follows
Catalog Number

Round Tapered Steel Poles

Indicate Drilling Pattern or Tenon

RTS25-HD- -1U-SA2C

Finish

Options

-BZ -DUP

•Shafts are of one piece construction with a full length longitudinal
high frequency electric resistance weld.
• RTS Series (round tapered) pole shafts are round in cross section
with a uniform taper of 0.14 inches per foot of length.

The data found in these sheets is for reference only and is subject to change.
Mtg. Ht.
(Nom.)
20
25

•Hand holes are furnished with a steel attachment bar, steel cover
and one round head machine screw.

30

•Hand holes are welded in the pole shaft and is located 18” above
the base.

35

Base Plate
•Fabricated from structural quality hot rolled carbon steel plate
conforming to ASTM A36.

39

50

•The pole chart information lists the bolt circle ranges for each pole.

Options

Nut Covers
•Nut covers are die cast zinc and are fastened to the and are
fastened to the shaft by 1/4” self tapping screw.

Finish

7.0

RTS25- *

7.0

RTS25-HD- *

8.0

RTS30- *

8.0

RTS30-HD- *

8.5

RTS35- *

9.5

RTS35-HD- *

9.0

RTS39- *

9.0

RTS39-HD- *
RTS45- *

11.0

RTS45-HD- *

10.0

RTS50- *

11.0

RTS50-HD- *

Description

Suffix

Receptacle
Provision for a Duplex Receptacle
Receptacle not included

SECURITY

Galvanized - GAL
Bronze (Powder) - BZ
Black (Powder) - BL
White (Powder) - WH

Anchor Bolts
•Fabricated from carbon steel bar conforming to AASHTO M314
Grade 55 or ASTM F1554 Grade-55.
•Bolts are galvanized a minimum of 12” on the threaded end.

RTS20- *

10.0

45

•Circumferentially welded top and bottom, the base plate telescopes
the pole shaft.

•Bolts have an “L” bend on one end.

6.5

PARKING & CANOPY

Electrical Ground
•A nut holder is provided near the hand hole and includes a 1/2”13 UNC hex head bolt and nut.

Round Straight Steel Pole
Dia. @ Base
Catalog No.*

COMMERCIAL & RETAIL

Hand hole
•The reinforcing hand hole rim consists of a rectangular shaped
tubing. The opening is 2-1/2” X 5” (nominal).

LOWBAY

See full brochure for EPA and weight requirements
Shaft
•Pole shafts are supplied in 11 gauge - 0.1196” (20’ - 30’) or 7
gauge - 0.1793” ( 25’ HD - 50’) thickness having a minimum yield Caution Pole Base/Anchor Bolts: When the customer uses his own template to install anchor bolts, he
strength of 55,000 psi and conforms to ASTM A595 Grade A.
assumes all responsibility for the installation of those anchor bolts.

- DUP

•Four anchor bolts are furnished per pole. Each anchor bolt is
furnished with two hex nuts and two flat washers.

AREA

Mounting
Area Lighting Mounting

Slipfitter Mounting

Drilling Pattern - for Luminaires Bolted Direct to the Pole- Includes Top Cap
NOTE: EPA of Bracket and Luminaire(s) must be considered
when calculating pole load.

Add suffix to order mounting bracket. All brackets are 2” Tenon
NOTE: EPA of Bracket and Luminaire(s) must be considered when calculating pole load.
Bullhorn
Spoke Arm
Description
Suffix
Suffix

Quasar (to 400W)
1 luminaire

Aries (All Lamps)
Quasar (1000W)

- 1U

- SA1
EPA 0.3 – 8 LB

2 Luminaires
- 2U
EPA 1.0 – 21 LB.
2 Luminaires

1 Luminaire

-1E34
- 2C34

-2L2

- 2L34

3 Luminaires -3T2

- 3T34

3 Luminaires
- 3U
EPA1.6 – 32 LB.

- SA2C
EPA 0.4 –11
- SA2L
EPA 0.4 –11
- SA3T
EPA 0.5 – 11 LB

4 Luminaires -4X2

- 4X34

- 3Y
EPA 1.3 - 34 LB.

- SA3Y
EPA 0.5 – 11 LB

4 Luminaires
- 4X
(@ 90°) EPA 1.6 - 44 LB.

- SA4X
EPA .6 – 18

SPECIALTY

-1E2

2 Luminaires -2C2

FLOODLIGHTING

Luminaire bolts to pole
To order pole drilling
add suffix

4 Luminaires
- 4U
(in line) EPA 2.3 – 44LB.
89

HIGHBAY

NEW

Poles

Square Aluminum

SSA

Construct catalog number as follows

Square Straight Aluminum Poles

Catalog Number

Indicate Drilling Pattern or Tenon

SSA5-20

-4U

Finish

Options

-BZ -DUP

See full brochure for EPA and weight requirements

LOWBAY

Pole Shaft
•Series SSA pole shafts are constructed of seamless extruded
tube of 6063 aluminum alloy per ASTM B221. They are fulllength heat treated after welding on the base flange to T-6
temper. The shaft shall be free of longitudinal welds.

COMMERCIAL & RETAIL

Hand hole
•4” and 5” poles have a 2” X 4” hand hole.

The data found in these sheets is for reference only and is subject to change.
Mtg. Ht.
(Nom.)
10

4.000

SSA4-10- *

12

4.000

SSA4-12- *

•The aluminum cover is secured with two stainless steel
screws.

14

4.000

SSA4-14- *

16

5.000

SSA5-16- *

18

4.000

SSA5-18- *

20

5.000

SSA5-20- *

25

6.000

SSA5-25- *

30

6.625

SSA6-30- *

Base Plate
•One piece cast socket of aluminum alloy 356 per ASTM B26
or B108. he base flange shall be joined to the pole shaft by
complete circumfrential welds, externally at the top of the
flange and internally at the bottom of the shaft tube.
Base Covers
•Two piece base covers are supplied.

* Indicate Tenon or Drilling Pattern

Options
Description

•Stainless steel screws are provided.

Suffix

Finish
Galvanized - GAL
Bronze (Powder) - BZ
Black (Powder) - BL
White (Powder) - WH

Anchor Bolts
•Fabricated from carbon steel bar conforming to AASHTO
M314-90.
•Bolts have an “L” bend on one end.
•The threaded ends of the anchor bolts are galvanized per
ASTM A153.

SECURITY

Square Straight Aluminum Pole
Square
Catalog No.*

•6” and 6.625” poles have a 3” X 5” hand hole.

Electrical Ground
•An internal ground lug with a 3/8” hole is provided
opposite the hand hole .

PARKING & CANOPY

Caution Pole Base/Anchor Bolts: When the customer uses his own template to install anchor
bolts, he assumes all responsibility for the installation of those anchor bolts.

Receptacle
Provision for a Duplex Receptacle
Receptacle not included

- DUP

•Each anchor bolt is furnished with one hex nut and one flat
washer also galvanized per ASTM A153.

AREA

Mounting
Area Lighting Mounting

Slipfitter Mounting

Drilling Pattern - for Luminaires Bolted Direct to the Pole- Includes Top Cap
NOTE: EPA of Bracket and Luminaire(s) must be considered
when calculating pole load.

Add suffix to order mounting bracket. All brackets are 2” Tenon
NOTE: EPA of Bracket and Luminaire(s) must be considered when calculating pole load.
Bullhorn
Spoke Arm
Description
Suffix
Suffix

FLOODLIGHTING

Luminaire bolts to pole
To order pole drilling
add suffix

Quasar (to 400W)

SPECIALTY

1 luminaire

Aries (All Lamps)
Quasar (1000W)

- 1U

- SA1
EPA 0.3 – 8 LB

2 Luminaires
- 2U
EPA 1.0 – 21 LB.
2 Luminaires

1 Luminaire

-1E2

-1E34

2 Luminaires -2C2

- 2C34

-2L2

- 2L34

3 Luminaires -3T2

- 3T34

3 Luminaires
- 3U
EPA1.6 – 32 LB.

- SA2C
EPA 0.4 –11
- SA2L
EPA 0.4 –11
- SA3T
EPA 0.5 – 11 LB

4 Luminaires -4X2

- 4X34

- 3Y
EPA 1.3 - 34 LB.

- SA3Y
EPA 0.5 – 11 LB

4 Luminaires
- 4X
(@ 90°) EPA 1.6 - 44 LB.

- SA4X
EPA .6 – 18

4 Luminaires
- 4U
(in line) EPA 2.3 – 44LB.
90

Parklume™

Bollards
HIGHBAY

To order construct the catalog number as follows
PL8 -70 MH

-RD

-QT

-BZ -options

Parklume™
PL8

Bollards by Acculite:
Chaplin™

Skyliter™

LOWBAY

Watts
Single Lamp Models
MH: 50, 70, 100
HPS: 35, 50, 70, 100, 150
Two Lamp Models
(Top Lamp / Bottom Lamp)
MH: 50/50, 70/50, 100/50

Cromwell™

HPS: 35/35,
50/35, 50/50
70/35, 70/50
100/35, 100/50
150/35, 150/50, 150/70

PL8
Four Attractive Models
— One and Two Lamp

One and Two Lamp Models
•All Parklume™ bollards can be supplied with a unique
side louver for applications where the walkway is uneven
or stairs require a higher level of illumination.
Cast Aluminum – 8” Diameter
•Heavy wall fluted body offers an attractive profile with
added strength.

Optics
•Chaplin™ features a polycarbonate top lens.

Metal Halide:
High Pressure Sodium:

MH
HP

Chaplin™:
Skyliter™:
Cromwell™:
Kaiser™:

RTH
ULG
RD
RDP

Model

Volts
Quad Tap – 120V, 208V, 240V & 277V
Tri Tap – 120/277/347V
480V
Color: See Below
Options: See Below

Options
Description

Suffix

•Skylighter™ models are furnished with a heat resistant
glass top lens.

Lamp With clear lamp

•Cromwell™ and Kaiser™ models feature a polycarbonate
top lens with optional louver.

Pulse Start Ballast
150W MH (Standard on 50, 70, 100W)

Finish
•Polyester powder coat finish. Decorator colors are
available.
Socket
•Specification grade porcelain lampholder.

- PSB

Louver
For Top lamp

- LV

Standard Colors
Bronze
Black
White

- BZ
- BL
- WH

Designer Colors

Consult Factory

Bolt Circle
BCD: 5-3/4”

FLOODLIGHTING

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, Pulse Start MH -40°C, HPS -40°C

-L

AREA

Anchor Bolts
•Three heavy duty anchor bolts are provided.

-QT
-TT
-480

SECURITY

•All two lamp Parklume™ bollards feature a vandal
resistant heavy duty cast aluminum grill and polycarbonate
lens on the bottom lamp.

Lamp

PARKING & CANOPY

Four Attractive Styles
•With the choice of designer colors and four distinct styles,
there is a Parklume™ model to enhance most architecture.

COMMERCIAL & RETAIL

Kaiser™

Dimensions
Chaplin TM

Skyliter TM
9-1/2”

Kaiser TM

32” 39-1/2”

34” 36-1/2”

34”
15”

15”
8”

SPECIALTY

8”

8”

34” 39”

15”

15”

8”

8”

8”

39-1/4”

Cromwell TM

8”

91

HIGHBAY

Floodlighting
Floodlighting of Building Facades, Signage and Large Areas
Caribe - Architectural Floodlight
Compact, elliptical shape compliments landscape design
LOWBAY

Narrow or medium spot, or wide beam reflector

COMMERCIAL & RETAIL

Lamps up to 400 watts

RBF

RBF

RBF

Narrow, Medium

Narrow, Medium

Narrow, Medium

or Wide Beam

or Wide Beam

or Wide Beam

Stem and Slipfitter
Mounting

Trunion and

Trunion and

Slipfitter Mounting

Slipfitter Mounting

Up to 175 Watts

Up to 400 Watts

Up to 400 Watts

SECURITY

PARKING & CANOPY

Accuflood - High Performance Floodlights

aFLS

EFM

SFL

NF

FLM

FLC

Compact

Compact

Traditional

Traditional

High Performance

High Wattage

Floodlight

Floodlight

Up to 400 Watts

1000 Watts

Floodlight

Floodlight

Floodlight

Floodlight

Narrow, Medium

Horizontal Lamp

Horizontal Lamp

Vertical Lamp

or Wide Beam

Up to 400 Watts

Up to 400 Watts

Up to 400 Watts

Reflectors
Up to 175 Watts

AREA

Poles
Steel & Aluminum Poles
Square Straight , Square Tapered
and Round Tapered Steel
FLOODLIGHTING

Square Straight Aluminum
Pages 88 - 90

SPECIALTY

Quartz-Lux / Flood-Lux - Economy Floodlights

Quartz-Lux

Flood-Lux

Economical 500 Watt and

Economical 35-150 Watt High

1500-Watt compact

Pressure Sodium miniature floodlight

quartz floodlight

92

NEW

Caribe

MAX 400W

Architectural Floodlight

Stem Mount

Trunion Mount

HIGHBAY

Lamp
Watts

Slipfitter Mount

Metal Halide

Stem Mount

Trunion Mount

Max 175W

50W thru 400W

RBF175MH-(Volts)
–
–

175 ED17
250 ED28
400 “

–
–
–
–
RBF250MH-(Volts)-PSB
RBF400MH-(Volts)-PSB

RBF50MH-(Volts)-SF
RBF70MH-(Volts)-SF
RBF100MH-(Volts)-SF
RBF150MH-(Volts)-SF
RBF250MH-(Volts)-PSB-SF
RBF400MH-(Volts)-PSB-SF

–
–
–
–
–
RBF250HP-(Volts)
RBF400HP-(Volts)

RBF35HP-(Volts)-SF
RBF50HP-(Volts)-SF
RBF70HP-(Volts)-SF
RBF100HP-(Volts)-SF
RBF150HP-(Volts)-SF
RBF250HP-(Volts)-SF
RBF400HP-(Volts)-SF

Pulse Start Metal Halide

Slipfitter Mount

Hinged Lens

50W thru 400W

250W- 400W

RBF
Wide Beam, Medium Spot
and Narrow Spot

•Excellent for illumination of facades, monuments,
building perimeters, signs, security lighting, accent,
walkway lighting and a many of other uses.

High Pressure Sodium
35 ED23.5
50
“
70
“
100 “
150 ED25
250 ED18
400 “

RBF35HP-(Volts)
RBF50HP-(Volts)
RBF70HP-(Volts)
RBF100HP-(Volts)
RBF150HP-(Volts)
–
–

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts

35W

50W

70W

100W

150W

175W

250W

400W

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

HP
HP
HP
HP
–
–
–

HP/PS
HP
HP
HP/PS
PS
PS
–

–
HP
HP
–
HP/PS
HP/PS
–

–
HP
HP
–
HP/PS
HP/PS
HP/PS

–
HP
HP
–
HP/PS
HP/PS
HP/PS

–
–
–
–
MH
MH
MH

–
–
–
–
HP/MH/PS
HP/MH/PS
HP/MH/PS

–
–
–
–
HP/MH/PS
HP/MH/PS
HP/MH/PS

Specification Grade Construction
•Cast construction has deep ribbed housing, beveled
edge door frame with full width concealed hinge,
recessed cover screws, heavy duty degree marked cast
aluminum stem.
NEMA Beam Distribution
•Narrow spot: Max 175W: 3H X 2V.
250W - 400W: 2H X 2V

Note: Indicates available ballasts: HP – High Pressure Sodium,
MH – Probe Start Metal Halide
PS – Pulse Start Metal Halide

•Medium spot: Max 175W: 4H X 3V
250W - 400W: 6H X 3V

Options

•Wide beam: Max 175W: 7H X 6W
250W - 400W: 6H X 6V

Lamp

Description

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
Color

Description

-L

- PC (volts)

Bronze
White
Black

See Above
- WH
- BL

Distribution
Narrow Max 175W: 3H X 2V.
250W - 400W: 2H X 2V

-N

Medium Max 175W: 4H X 3V
250W - 400W: 6H X 3V

-M

Finish
•Standard colors are bronze, black, white

Wide Max 175W: 7H X 6W
250W - 400W: 6H X 6V Standard
See Above

•Optional designer colors are available.
Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Suffix

Clear lamp

Dimensions
RBF

Stanchion
W

Slipfitter Adapter
Converts stem to slipfitter
Fits tenons from 2” - 3”IPS
(2 3/8” - 3 1/2” OD)

RBF-PTF

Converts trunion to slipfitter
Fits 2” IPS (2-3/8”) OD tenon

RBF-TA

Lexan Shield

Max 175W RBF-S-LS
250 - 400W RBF-M-LS

Top Visor
Black

Max 175W RBF-S-TV
250 - 400W RBF-M-TV

Side Visor
Black

Max 175W RBF-S-SV
250 - 400W RBF-M-SV

Horizontal
Louver
Black

Max 175W RBF-S-HLV
250 - 400W RBF-M-HLV

Stanchion
For 1/2” Stem mount
Bronze

RBF-STANCHION-BZ

3”
H

SPECIALTY

D

Catalog No.

FLOODLIGHTING

New Technology Pulse Start
Metal Halide Lamps & Ballasts
•Pulse Start technology provides longer lamp life, more
lumens per watt, better lumen maintenance, faster lamp
warm up, faster hot restrike and superior color rendition.

Accessories

AREA

Specification Grade Lampholder
•4kv rated medium base lampholder.

SECURITY

Suffix

120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V
480V

Gasketed Lens Assembly
•Both the lens and door are gasketed.

PARKING & CANOPY

Architectural Profile
•The elliptical shape is designed to blend with and
compliment the architects landscape design.

RBF50MH-(Volts)
RBF70MH-(Volts)
RBF100MH-(Volts)
RBF150MH-(Volts)
–
–

50 ED17
70
“
100 “
150 “
250 ED28
400 “

18”

175W Max
250W - 400W

COMMERCIAL & RETAIL

RBF175MH-(Volts)-SF
RBF250MH-(Volts)-SF
RBF400MH-(Volts)-SF

LOWBAY

–
RBF250MH-(Volts)
RBF400MH-(Volts)

D
W
H
8-5/8” 11”
8-3/4”
13” 17-5/8” 13-1/2”

4”

93

High Performance Floodlighting

HIGHBAY

Accuflood™

Lamp
Watts

Base

1/2” Stem Mount

Yoke Mount

Metal Halide

LOWBAY

50
70
100
150
175

Medium
“
“
“
“

FLS50MH-(volts)
FLS70MH-(volts)
FLS100MH-(volts)
FLS150MH-(volts)
FLS175MH-(volts)

FLS50MH-(volts)-TRN
FLS70MH-(volts)-TRN
FLS100MH-(volts)-TRN
FLS150MH-(volts)-TRN
FLS175MH-(volts)-TRN

COMMERCIAL & RETAIL

High Pressure Sodium

FLS

FLS

Yoke Mount

Stem Mount

35
50
70
100
150

Medium
“
“
“
“

FLS35HP-(volts)
FLS50HP-(volts)
FLS70HP-(volts)
FLS100HP-(volts)
FLS150HP-(volts)

FLS35HP-(volts)-TRN
FLS50HP-(volts)-TRN
FLS70HP-(volts)-TRN
FLS100HP-(volts)-TRN
FLS150HP-(volts)-TRN

FLS

PARKING & CANOPY

35 Watt
thru 175 Watt Floodlight
Three beam spreads for Metal Halide and High
Pressure Sodium Lamps
•This compact low wattage floodlight is available for
wide, medium or narrow beam spreads.
Construction
•Heavy wall die cast aluminum housing.

Primary Voltage Availability – Replace “-volts” in catalog number with required voltage suffix listed below.
Volts
120V
120V Reactor NPF
120V Reactor HPF
277V
120/208/240/277V
120/277/347V
480V

Suffix

35W

50W

70W

100W

150W

175W

- 120
- 120NP
- 120R
- 277
- QT
- TT
- 480

HP
HP
HP
HP
–
–
–

HP/MH
HP
HP
HP/MH
–
–
–

–
HP
HP
–
HP/MH
HP/MH
–

–
HP
HP
–
HP/MH
HP/MH
HP/MH

–
HP
HP
–
HP/MH
HP/MH
HP/MH

–
–
–
–
MH
MH
MH

Note: Indicates available ballasts: HP – High Pressure Sodium, MH – Metal Halide

•Die cast aluminum hinged cover is secured with a single
heavy duty 1/4”-20 cover bolt.

SECURITY

•Flat tempered gasketed glass lens.
•Gasketing is long life silicone rubber.
NEMA Beam Distribution
• Wide beam: MH & HPS - 7H X 7V.

AREA

• Medium beam: MH - 6H X 5V, HPS - 6H X 6V.

Options

Accessories

Description

Description

Suffix

• Narrow beam: MH - 4H X 3V, HPS - 4H X 4V

Lamp

Mounting
•Choice of yoke, stem and stem with slipfitter mounting.

Photocontrol
On multi-tap ballasts indicate line voltage - PC (volts)

Socket
•Specification grade porcelain lampholder.

NEMA Distribution
Narrow
Medium
Wide

Finish
•Bronze polyester powder coat finish.

With Clear Lamp

MH
4X3 4X4
6X5 6X6
7X7 7X7

-L

HPS
-N
-M
Standard
See Above

Catalog No.

Slipfitter Adapter
Converts stem to slipfitter
Tenon 2” - 3”IPS
2 3/8” - 3 1/2” OD

FLS-PTF

Vandal Shield Lexan

FLS-LS

Wire Guard

FLS-WG

Stanchion
Bronze

FLS-STANCHION-BZ

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

FLOODLIGHTING

Dimensions
Yoke Mount

Stem Mount

6-3/4”

9-1/4”
6-3/4”

4-5/16”

9-1/4”

2”

oo

9-1/4”
1-3/4”

SPECIALTY

EPA
0.71 ft2
Includes 1.2 drag factor

94

9 1/4”
4-3/8”

oo o

Accuflood™

High Performance Floodlighting
HIGHBAY

Lamp
Watts

Yoke
Mount

Base

Metal Halide
175
250
400

EFM175MH-volts
EFM250MH-volts
EFM400MH-volts∆

Mogul
“
“

EFM150HP-volts
EFM250HP-volts
EFM400HP-volts

LOWBAY

Mogul
“
“

Metal Halide
150
250
400

COMMERCIAL & RETAIL

EFM
Yoke Mount

EFM
150 Watt
thru 400 Watt Floodlight

Construction
•Heavy wall die cast aluminum housing with separate
compartment to thermally isolate the capacitor.

Options

Accessories

Description

Description

Suffix

Lamp With Clear Lamp

-L

•Heavy duty plated steel yoke.

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)

•Hinged cover is secured with two heavy duty 1/4”-20
cover bolts. Gasketing is long life silicone rubber.

Protected Igniter
For HPS Luminaires

•Three piece precision anodized reflector.

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

•Flat tempered glass lens.

Vandal Shield Factory Installed Lexan

- LS

Catalog No.

EFM-TA

Cross Arm Adapter
For horizontal aiming

EFM-CA

Vandal Shield Lexan

Factory Installed

Top Visor
Wall Bracket
Use with slipfitter or tenon adapter
tenon 2” IPS (2-3/8” OD)

EFM-TV

SECURITY

Mounting
•Optional tenon adapter for slipfitter mounting.

- PI

Tenon Adapter
Converts yoke to slipfitter
Tenon 2”IPS (2-3/8” OD)

PARKING & CANOPY

Compact Size
•The smallest 400 watt floodlight available.

∆ 400W metal halide — use ED28 lamp

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

WB-1-BZ

NEMA Beam Distribution
• Wide beam: MH & HPS - 7H X 7V.
Socket
•Specification grade porcelain lampholder.
Finish
•Bronze polyester powder coat finish.

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Dimensions
Yoke Mount

FLOODLIGHTING

8-1/2”

14”

8-1/2”

1-3/4”
4-7/8”

o

oo

EPA

SPECIALTY

1.2 ft2 Includes 1.2 drag factor

95

High Performance Floodlighting

HIGHBAY

Accuflood™

Lamp
Watts

Yoke Mount

Slipfitter
Tenon 2” IPS (2-3/8”OD)

SFL175MH-volts
SFL250MH-volts
SFL400MH-volts∆

SFL175MH-volts-SF
SFL250MH-volts-SF
SFL400MH-volts-SF∆

SFL70HP-volts
SFL100HP-volts
SFL150HP-volts
SFL250HP-volts
SFL400HP-volts

SFL70HP-volts-SF
SFL100HP-volts-SF
SFL150HP-volts-SF
SFL250HP-volts-SF
SFL400HP-volts-SF

Base

Metal Halide

LOWBAY

175
250
400

Mogul
“
“

High Pressure Sodium

COMMERCIAL & RETAIL

SFL
Yoke Mount

SFL
Slipfitter

SFL
70 Watt
thru 400 Watt Floodlight

70
100
150
250
400

Mogul
“
“
“
“

∆ 400W metal halide — use ED28 lamp

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

PARKING & CANOPY

Options
Versatile
•This compact floodlight with traditional floodlight styling
for applications up to 400 watt.
Construction
•Heavy wall die cast aluminum.
•Hinged cover with two heavy duty cover bolts.
•One piece anodized reflector.
•Flat tempered glass lens is gasketed (no RTV).

SECURITY

Mounting
•Choice of yoke or slipfitter mounting.

Accessories

Description

Description

Suffix

Lamp
with clear lamp

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Protected Igniter
for HPS Luminaires

- PI

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

Catalog No.

Tenon Adapter
Converts yoke to slipfitter
Tenon 2”IPS (2-3/8” OD)

SFL-TA

Cross Arm Adapter
For horizontal aiming

SFL-CA

Vandal Shield Lexan

SFL-LS

Top Visor

SFL-TV

Wall Bracket
Use with slipfitter or tenon adapter
Tenon 2” IPS (2-3/8” OD)

NEMA Beam Distribution
•Wide beam: 175W MH - 6H X 7W,
250W & 400W MH - 7H X 7W.
400W HPS - 6H X 7W,
Socket
•Specification grade porcelain lampholder.

AREA

Finish
•Bronze polyester powder coat finish.
Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Dimensions
Yoke Mount

Slipfitter

FLOODLIGHTING

3”

5-3/4”

o

6”

oo
14”

EPA

SPECIALTY

1.9 ft2 Includes 1.2 drag factor

96

7-1/16”

15-7/8”

WB-1-BZ

Accuflood™

High Performance Floodlighting

Base

HIGHBAY

Lamp
Watts

Slipfitter
Tenon 2” IPS (2-3/8”OD)

Yoke Mount

Metal Halide
175
250
400

Mogul
“
“

NF175MH-volts-SF
NF250MH-volts-SF
NF400MH-volts-SF

NF70HP-volts
NF100HP-volts
NF150HP-volts
NF250HP-volts
NF400HP-volts

NF70HP-volts-SF
NF100HP-volts-SF
NF150HP-volts-SF
NF250HP-volts-SF
NF400HP-volts-SF

LOWBAY

NF175MH-volts
NF250MH-volts
NF400MH-volts

High Pressure Sodium

NF

NF
70 Watt
thru 400 Watt Floodlight

Construction
•Heavy wall die cast aluminum.
•Hinged cover with four heavy duty cover bolts.
•One piece anodized reflector.
•Flat tempered glass lens is gasketed (no RTV).
Mounting
•Choice of yoke or slipfitter mounting.

Socket
•Specification grade porcelain lampholder.

Options

Accessories

Description

Description

Suffix

Lamp
with clear lamp

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others
Protected Igniter
for HPS Luminaires

- PCR
- PI

Catalog No.

Tenon Adapter
Converts yoke to slipfitter
Tenon 2”IPS (2-3/8” OD)

NF-TA

Cross Arm Adapter
For horizontal aiming

NF-CA

Vandal Shield Lexan

NF-LS

Top Visor

NF-TV

Wall Bracket
Use with slipfitter or tenon adapter
Tenon 2” IPS (2-3/8” OD)

SECURITY

NEMA Beam Distribution
• Wide beam: MH & HPS - 7H X 6V.

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

PARKING & CANOPY

Versatile
•This compact floodlight with traditional floodlight styling
for applications up to 400 watt.

Mogul
“
“
“
“

COMMERCIAL & RETAIL

Yoke Mount

70
100
150
250
400

WB-1-BZ

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

Finish
•Bronze polyester powder coat finish.

Dimensions
Yoke Mount

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Slipfitter
16-3/8”

16-3/8”

7-3/8”

7-3/8”

FLOODLIGHTING

16-3/8”

16-3/8”

SPECIALTY

EPA
2.23 ft2 (Includes 1.2 drag factor).

97

HIGHBAY

Accuflood™

High Performance Floodlighting
Lamp
Watts

Base

Yoke Mount

Slipfitter
Tenon 2” IPS (2-3/8”OD)

FLM250MH-volts
FLM400MH-volts

FLM250MH-volts-SF
FLM400MH-volts-SF

FLM250HP-volts
FLM400HP-volts

FLM250HP-volts-SF
FLM400HP-volts-SF

Metal Halide
250
400

Mogul
“

LOWBAY

High Pressure Sodium
250
400

COMMERCIAL & RETAIL

FLM
Yoke mount

FLM
Slipfitter

Mogul
“

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

FLM
250 Watt and 400 Watt Floodlight

PARKING & CANOPY

Efficient Optics
•Use fewer luminaires to obtain the required light levels
with FLM high performance optics.
Hazardous Locations
•Available for Class I, Division 2, Groups B, C, D.
Construction
•Heavy wall die cast aluminum.
•Hinged door secured with 1⁄4”-20 cover bolts. Keyed
interlocking hinge secures the door during servicing.
•Flat tempered glass lens.

SECURITY

Mounting
•Choice of yoke or slipfitter mounting.
NEMA Beam Distribution
• Wide beam: MH & HPS - 5H X 7V.
Socket
•Specification grade porcelain lampholder.
Finish
•Bronze polyester powder coat finish.

AREA

Ballasts
•HPF ballasts are suitable for low temperature starting.
MH-30°C, HPS -40°C

Options

Accessories

Description

Description

Suffix

Lamp
with clear lamp

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others
Protected Igniter
for HPS Luminaires

- PCR
- PI

FLM-TA

Cross Arm Adapter
For horizontal aiming

FLM-CA

Vandal Shield Lexan

FLM-LS

Top Visor

FLM-TV

Wall Bracket
Use with slipfitter or tenon adapter
tenon 2” IPS (2-3/8” OD)

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage
Hazardous Locations
Class 1, Div. 2, Groups B, C, D
Ambient

25˚C

40˚C

400W HPS 360˚C
400W MH 328˚C

375˚C
343˚C

- C1

Dimensions
Yoke

Slipfitter

7-1/16”

FLOODLIGHTING

Catalog No.

Tenon Adapter
Converts yoke to slipfitter
Tenon 2”IPS (2-3/8” OD)

17-1/16”

7-1/16”

16”

16”

8-3/16”

5-1/8”

3-1/2”
1-3/4”

SPECIALTY

oo

98

17-1/16”

oo o

EPA
2.3 ft2
Includes 1.2 drag factor

WB-1-BZ

Accuflood™

High Performance Floodlighting

Yoke Mount

Slipfitter
Tenon 2” IPS (2-3/8”OD)

FLC1000MH-volts

FLC1000MH-volts-SF

FLC1000HP-volts

FLC1000HP-volts-SF

Base

HIGHBAY

Lamp
Watts

Metal Halide
1000

Mogul

High Pressure Sodium
Mogul

LOWBAY

1000

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

FLC

Yoke mount

Slipfitter

COMMERCIAL & RETAIL

FLC

FLC
1000 Watt

•Well suited to automotive sales lots and other outdoor
product display areas where the combination of high
light levels and even distribution enhances the end users
product presentation.
Construction
•Heavy wall die cast aluminum housing and door.

Options

Accessories

Description

Description

Suffix

Lamp With clear Lamp

-L

Photocontrol
On multi-tap ballasts indicate line voltage
Available 120/208/240/277/347V
- PC (volts)
Photocontrol Receptacle
480V photocontrol receptacle only
Photocontrol supplied by others

- PCR

Protected Igniter
for HPS Luminaires

•Steel yoke or die cast 2” slipfitter (2-3/8”).

Fuse Holder Supplied with fuse
Single pole - F1
On multi-tap ballasts indicate line voltage

- PI

Catalog No.

Tenon Adapter
Converts yoke to slipfitter
Tenon 2”IPS (2-3/8” OD)

FLC-TA

Cross Arm Adapter
For horizontal aiming

FLC-CA

Vandal Shield Lexan

FLC-LS

Top Visor

FLC-TV

Wall Bracket
Use with slipfitter or tenon adapter
Tenon 2” IPS (2-3/8” OD)

SECURITY

•Hinged door secured with two #10-24 cover bolts.

PARKING & CANOPY

Applications
•Precisely engineered to provide durable, efficient
controlled illumination of parking lots, sports facilities,
storage areas, building facades, industrial facilities or
any other outdoor location where an energy efficient
weatherproof floodlight is appropriate.

WB-1-BZ

•Flat tempered glass lens.
Optical Assembly
•Anodized reflector for optimum long term performance.
•This reflector assembly provides an effective wide beam
spread and excellent uniformity for superior lighting
performance.

Ballasts
•A full range of ballasts is available.
Finish
•Finished with a pleasing dark bronze polyester powder
coat with excellent corrosion resistant characteristics.

Dimensions
Slipfitter

Yoke Mount
10-1/4”

23-3/4”

FLOODLIGHTING

EPA
•4.7 ft2 (includes 1.2 drag factor)

AREA

NEMA Beam Distribution
• Wide beam: MH & HPS - 6H X 6V.

23-3/4”
10-1/4”
23-3/4”

23-3/4”

7-1/2”

6”

Slipfitter:
2”IPS (2-3⁄8” OD)

5-3/8”
3”

2 holes for 3/8” bolt
1 hole 1/2”” dia

SPECIALTY

2-1/2”

EPA
4.7 ft2 (Includes 1.2 drag factor).

99

HIGHBAY

Flood-Lux Series

Economy Floodlighting

Lamp
Watts

Catalog Number
with Lamp*

Catalog Number with
Lamp and Photocontrol*

High Pressure Sodium

LOWBAY
COMMERCIAL & RETAIL
PARKING & CANOPY

CF35HP-120NP-L
CF50HP-120NP-L
CF70HP-120NP-L
CF100HP-120NP-L
CF150HP-120NP-L

35
50
70
100
150

CF

* Furnished with North American lamp and North American 120V NPF ballast.
Bronze Finish. Optional White add suffix -WH
Note: Only available for 120V.

CF
Flood-Lux TM Floodlighting
North American Components
• The superior quality and reliability of a North American
lamp and ballast.
Construction
• Glass lens.
• Cast aluminum housing and lens frame.
• Snap action lens clips.
Hinged Door
• With heavy duty captive hinged door assembly for easy
relamping and superior weatherproof seal.

SECURITY

Supplied with Lamp
• Superior quality North American HPS lamp.

Dimensions
CF

AREA

7-1⁄2”

9”

SPECIALTY

FLOODLIGHTING

6-1⁄4”

100

CF35HP-120NP-L-PC
CF50HP-120NP-L-PC
CF70HP-120NP-L-PC
CF100HP-120NP-L-PC
CF150HP-120NP-L-PC

Quartz-Lux Series

Economy Floodlighting

Volts

Catalog No.
with Lamp

120
240

Q500-L
Q1500-L

HIGHBAY

Lamp
Watts

Quartz Halogen
500
1500

LOWBAY
COMMERCIAL & RETAIL

Q
Quartz Halogen Lamp

Q
Quartz-Lux TM
Hinged Door
• With heavy duty captive hinged door assembly for easy
relamping and superior weatherproof seal.

PARKING & CANOPY

Construction
• Cast aluminum body and door.
•Fully gasketed
Supplied with Lamp
• Double-ended quartz lamp

SECURITY

Dimensions
Q1500

Q500

6-3/8”

9-3/8”

3-3/4”

AREA

9”

14-3/8”
5/1/2”

FLOODLIGHTING
SPECIALTY
101

HIGHBAY

Sports Lighting

LOWBAY

Sports arenas and stadiums which require highly controlled beam spreads
Sports Pro - Sports Lighting Luminaire

COMMERCIAL & RETAIL

Large 22” reflector for maximum performance
Heavy duty construction with simple mounting and aiming
Available with integral ballast or use with optional remote ballast

SPECIALTY

FLOODLIGHTING

AREA

SECURITY

PARKING & CANOPY

400, 1000 and 1500 Watts

102

Sport-Pro™

High Performance Sports Lighting
NEMA
Beam Spread

Integral Ballast
Cross arm Mount

HIGHBAY

Lamp
Watts

Remote Luminaire
Yoke Mount

Metal Halide

SP
400W, 1000W and 1500W
Sports Lighting Luminaire

II
III
IV
V
VI

SP402MH-QT
SP403MH-QT
SP404MH-QT
SP405MH-QT
SP406MH-QT

SP402MH-RB
SP403MH-RB
SP404MH-RB
SP405MH-RB
SP406MH-RB

1000
1000
1000
1000
1000

Type
Type
Type
Type
Type

II
III
IV
V
VI

SP1002MH-QT
SP1003MH-QT
SP1004MH-QT
SP1005MH-QT
SP1006MH-QT

SP1002MH-RB
SP1003MH-RB
SP1004MH-RB
SP1005MH-RB
SP1006MH-RB

1500
1500
1500
1500
1500

Type
Type
Type
Type
Type

II
III
IV
V
VI

SP1502MH-QT
SP1503MH-QT
SP1504MH-QT
SP1505MH-QT
SP1506MH-QT

–
–
–
–
–

COMMERCIAL & RETAIL

For Remote Ballast

Integral Ballast

Type
Type
Type
Type
Type

LOWBAY

SP

SP

400
400
400
400
400

High Pressure Sodium

•Heat and impact resistant tempered glass lens.
Heavy Duty Construction
•Rugged construction combines a corrosion resistant cast
aluminum socket and ballast housing with aluminum
cover and precision spun aluminum optical assembly.
•Remote ballasted Sport-Pro™ luminaires feature a cast
socket housing and heavy duty zinc plated steel yoke.

•The water-tight cord connector provides easy and
reliable supply cable installation.

Finish
•Corrosion resistant polyester finish protects the ballast
assembly and lamp socket assemblies.

II
III
IV
V
VI

SP402HP-QT
SP403HP-QT
SP404HP-QT
SP405HP-QT
SP406HP-QT

SP402HP-RB
SP403HP-RB
SP404HP-RB
SP405HP-RB
SP406HP-RB

1000
1000
1000
1000
1000

Type
Type
Type
Type
Type

II
III
IV
V
VI

SP1002HP-QT
SP1003HP-QT
SP1004HP-QT
SP1005HP-QT
SP1006HP-QT

SP1002HP-RB
SP1003HP-RB
SP1004HP-RB
SP1005HP-RB
SP1006HP-RB

Voltage Suffix: change “volts” to –
“- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V
“- 480” 480V

Options
Description

Lamp With clear lamp

Single pole, with fuse
Two Pole, with fuses

-L

Ballasts
•HPF ballasts are suitable for low temperature starting.

Dimensions

- F1
- F2
- 3C-PW
- 6C-PW
- 12C-PW

SP: Remote Ballast
Max
30-1⁄8”

•Consult factory for remote ballast

Catalog No.

Integral Ballast SlipFitter
Tenon 2” IPS
(2-3/8” OD)

SP-SF

Remote Luminaire Tenon Adapter
Converts yoke to slipfitter
Tenon 2” IPS (2-3/8” OD)

SP-TA

Cross Arm Angle iron
2 luminaire
3 luminaire
4 luminaire

SP-CA-2
SP-CA-3
SP-CA-4

Cross Arm Adapter
For horizontal aiming of remote luminaire

SP-CA

Top Visor

SP-TV

Wall Bracket
For 2” IPS (2-3/8” OD) Slipfitter

SP-WB1

Aiming
SP: Integral Ballast

145˚ Max
EPA: 2.80*

Ø 22-3⁄4”

Max
35-1⁄4”

SPECIALTY

71⁄2”
31⁄8”

o

oo

EPA: 2.80*

Ø 22-3⁄4”

2 holes 3⁄8” dia
Centre hole 1⁄2” dia
0˚
Nadir

10˚
Min

FLOODLIGHTING

•The heavy duty yoke is zinc plated.

MH-30°C, Pulse Start MH -40°C, HPS -40°C

Description

Suffix

Fuse Holder
On multi-tap ballasts indicate line voltage

Pre-Wired
3’ SOW Cord
6’ SOW Cord
12’ SOW Cord

•Exposed hardware is stainless steel.

Accessories

AREA

•Stainless steel latches and a dedicated hinge assembly
ensure that the lens gasket is evenly compressed. Hand
activated, these latches make servicing a fast and easy task.

Type
Type
Type
Type
Type

SECURITY

Easy Installation and Maintenance
•Mounted directly to the cross arm, the ballast assembly
is secured with a single bolt for fast installation and
easy horizontal aiming. Vertical aiming is just as quick,
with single bolt securing the toothed knuckle.

400
400
400
400
400

PARKING & CANOPY

High Performance Optical Assemblies
•Large 22 inch spun aluminum Sport-Pro™ reflector
assemblies for maximum performance.

103

HIGHBAY

Vapourtight Lighting

LOWBAY

Damp location listed for use in indoor/outdoor rugged service areas
or in “retro” style interiors.
For wall, ceiling or pendant mounting

COMMERCIAL & RETAIL

Vapourlume
Enclosed and gasketed design for both indoor and outdoor use
Rugged cast aluminum housing and guards

SPECIALTY

FLOODLIGHTING

AREA

SECURITY

PARKING & CANOPY

Up to 200-watt Incandescent A-lamp

104

Vapourlume™

Incandescent
HIGHBAY

Wattage

With Clear Glass Globe
With Guard

Hub

Pendant
100W
200W

VP100G
VP200G

3/4”
3/4”

LOWBAY

Ceiling - With Junction Box
Furnished with 5 entries and 4 plugs
100W
200W
VP

VW

Ceiling

Pendant

Wall

COMMERCIAL & RETAIL

VC

VC100G
VC200G

3/4”
3/4”

Wall - With Junction Box
Furnished with 5 entries and 4 plugs

VC , VP, VW

100W
200W

100 and 200 Watt
Vaportight Incandescent Fixtures

Options
Description

Construction
• Cast aluminum housings and guards.
• Globe: Standard– clear glass.

Suffix

Color
Natural Aluminum
White
Black
Designer Colors

– junction box with five 3⁄4” hubs
– 3⁄4” hubs
– junction box with five 3⁄4” hubs

Finish
• Standard
• Optional

– Color Metallic Grey
– Designer colors to customer specification

Suffix

Replacement Globes
Clear Glass 100W
200W

- V100
- V200

SECURITY

Mounting
• Ceiling
• Pendant
• Wall

Standard
- WH
- BL
Consult factory

Description

PARKING & CANOPY

Enclosed and Gasketed
• Enclosed and gasketed for industrial applications, these
rugged vaportight luminaires are suitable for use both
outdoors or indoors.
• Retro-look for applications with functional decor.

VC100G
VC200G

3/4”
3/4”

Certification
• Suitable for indoor and outdoor use

Dimensions
AREA

Ceiling Mount

Pendant Mount

Cast Box

Wall Mount
E1

41
⁄4”

E2

FLOODLIGHTING

H1
H

H
H2

415⁄16”
59⁄16”

D

D

D

H

VP100G

4-1⁄4”

10-1⁄4”

VP200G

5-5⁄8”

11-15⁄16”

Ceiling

D

H1

H2

VC100G

4-1⁄4”

9-5⁄8”

7-3⁄4”

VC200G

5-5⁄8”

11-1⁄2”

9-7⁄8”

Wall

D

H1

H2

VW100G

6-13⁄16”

5-3⁄16”

12-3⁄4”

VW200G

7-5⁄8”

6”

14-1⁄4”

Five hubs (3⁄4”) and 4 plugs
Box depth =1-5⁄8”

SPECIALTY

Pendant

105

HIGHBAY

Specialt y Fluorescent

LOWBAY

Specialty indoor and outdoor fluorescent lighting

COMMERCIAL & RETAIL

Signlume - Aiming Adjustable Fluorescent Sign Lighting

PARKING & CANOPY

For outdoor illumination of signs

EWF / EWP - Enclosed and Gasketed Fluorescent
For environments where moisture and corrosive materials are present such as underground parking,

AREA

SECURITY

food processing plants, refrigeration units, industrial processing and car washes

SLC / SLS High Abuse Fluorescent
FLOODLIGHTING

Heavy gauge steel housings and polycarbonate lens for high abuse environments

SPECIALTY

Surface mount or corner mount models available

106

Signlume™

Facade and Sign Lighting
Catalog No. - Ballast

+

Catalog No. - Luminaire

Order Separately: 1 Single Lamp Ballast & 1 Single Lamp Luminaire

HIGHBAY

Lamp Length

Single Lamp Remote Ballast + Remote Luminaire
T12 - High Output - 800MA - 120V - Electromagnetic
4 foot
FSL-B148HO-120 †
+
6 foot
FSL-B172HO-120 †
+
8 foot
FSL-B196HO-120 †
+

FSL

LOWBAY

FSL148 (Order 1 luminaire)
FSL172 (Order 1 luminaire)
FSL196 (Order 1 luminaire)

T12 - Very High Output - 1500MA - 120V - Electromagnetic
4 foot
FSL-B148VHO-120 †
+
FSL148 (Order 1 luminaire)
6 foot
FSL-B172VHO-120 †
+
FSL172 (Order 1 luminaire)
8 foot
FSL-B196VHO-120 †
+
FSL196 (Order 1 luminaire)
Order Separately: 1 Two Lamp Ballast & 2 Single Lamp Luminaires
Two Lamp Remote Ballast + Remote Luminaire (Single Lamp)

FSL

When two lamp ballasts are used, both lamps in both luminaires must be identical

Weatherproof

T12 - High Output - 800MA - 120V - Electromagnetic
4 foot
FSL-B248HO-120 ‡
+
6 foot
FSL-B272HO-120 ‡
+
8 foot
FSL-B296HO-120 ‡
+

T12 - Very High Output - 1500MA - 120V - Electromagnetic
4 foot
FSL-B248VHO-120 ‡
+
FSL148 (Order 2 luminaires)
6 foot
FSL-B272VHO-120 ‡
+
FSL172 (Order 2 luminaires)
8 foot
FSL-B296VHO-120 ‡
+
FSL196 (Order 2 luminaires)

Construction
•Luminaire features a rugged extruded aluminum body
with baked white finish and clear acrylic lens.
•External hardware is stainless steel. Heavy duty cast
aluminum wiring box with gasketed cover.

† Ballasts noted operate one lamp, order one luminaire per ballast
‡ Ballasts noted operate two lamps, order two luminaires per ballast
* For voltages other than 120V consult factory for availability

•Ballast housing is steel.
Minimum Starting Temperatures / Rating
•High Output -30°C (-20˚F) 800 MA

Accessories
Catalog No.

Remote Ballast Support Kit
(Recommended when ballast is
only supported by the conduit.)
For Mounting to 3/4” conduit

Signlume: Mounting Instructions
1: Spacing “S” should not exceed overhang “OH”
2: Minimum Overhang,
“OH” – not less than 0.4 X height “H”
Max 45˚
Outdoor
Aiming
0˚

RB-CMK

FSL-18-ARM
FSL-24-ARM
FSL-36-ARM
FSL-48-ARM

AREA

Conduit Arms
3/4” conduit arms, threaded both
ends, white finish.
18” long
24” long
36” long
48” long
Tandem Mount
Coupling for Tandem mount

3: Overhang “OH – should be as large as practical

SECURITY

Description

•Very High Output -30°C (-20˚F)1500 MA

4: For outdoor applications aim
the luminaire below horizontal.

FSL148 (Order 2 luminaires)
FSL172 (Order 2 luminaires)
FSL196 (Order 2 luminaires)

PARKING & CANOPY

Applications
•For outdoor illumination of signs and facades when
even illumination across the entire length of a facade or
sign is required. Most sign lengths can be
accommodated by combining the available lengths (4,
6, and 8 foot).

COMMERCIAL & RETAIL

FSL

Standard

Dimensions
Signlume Remote Ballast

Signlume Luminaire

FLOODLIGHTING

3⁄4” Straight pipe thread bushings
OH

D

A
C

Mtg. Ctr.
4 49⁄64”

5–33⁄64”
H

S
Junction box
this end

Mtg. Ctr: 21–57⁄64”
Overall: 23–7⁄32”

B

A
B
Lamp
Single (o/a)
Double (o/a)
4’
4’ 8-1⁄8”
9’ 7⁄8”
6’
6’ 8-1⁄8”
13’ 7⁄8”
8’
8’ 8-1⁄8”
17’ 7⁄8”
Mounts on 3⁄4” rigid conduit. (not included)

C
Mtg Ctr
4’ 4-3⁄4”
6’ 4-3⁄4”
8’ 4-3⁄4”

SPECIALTY

3-–3⁄16”
D
Box
2-3⁄8”
2-3⁄8”
2-3⁄8”
107

HIGHBAY

Fluorescent

Specialty Fluorescent Lighting

Lamp

Minimum
Watts Start Temp

Dim
Ref ∆

WP Series
Catalog Number*

Dim
Ref ∆

EWF Series
Catalog Number*

—
—

1
1

EWF120RS-120
EWF224RS-120

6

WP232RS-120ESB
WP432RS-120ESB
—
WP240RS-120ESB

2
4
1
2

EWF232RS-120ESB
EWF432RS-120ESB
EWF140RS-120
EWF240RS-120ESB

-18°C

7

WP240LT-120

3

EWF240LT-120

-29°C
-29°C

7
7

WP248HO-120
WP296HO-120

3 EWF248HO-120
3 EWF296HO-120

10°C

9

WP296SL-120ESB

5

Trigger Start

PARKING & CANOPY

COMMERCIAL & RETAIL

LOWBAY

24”
24”

10°C
10°C

Rapid Start
48”
48”
48”
48”
EWF & WP

EWF & WP
Weatherproof
Non-Metallic
•Exterior components are non-metallic and chemical
resistant.
Moist and Corrosive Areas
•Designed for installations such as food processing plants,
refrigeration units, industrial processing, car washes etc.
Construction
•Polyester reinforced fiberglass housing and high impact
DR (85-15) acrylic diffuser. Celcon snap action clips to
secure the lens are standard.

•EWF: Commercial interior fluorescent mounted in a
fiberglass housing.

2x32
4x32
1x40
2x34

10°C
10°C
10°C
10°C

6
8

Low Temperature
48”

•WP: Ballast tray and reflector are combined as a one
piece drop-in assembly.

SECURITY

1x20
2x20

2x40

High Output
48”
96”

2x60
2x95

Slimline
96”

2x60

* 277V replace -120 with -277

Options

Accessories

Description

Description

Suffix

Tamper Proof Hardware

- TP

Polycarbonate Lens

- PC

Energy Saving Ballast

See above

Electronic Ballast
For “232” or “432” models (T8 lamp) only
Replace “ESB” with - ETB
Pendant Mounting
- PD

WP

EWF

Acrylic Lens
4 Foot
8 Foot

P-AL4
P-AL8

E-AL4
E-AL8

Polycarbonate Lens
4 Foot
8 Foot

P-AL4-PC
P-AL8-PC

E-AL4-PC
E-AL8-PC

Latches
Standard Celcon
Polycarbonate
Stainless Steel

P-LC
P-LC-PC
P-LC-SS

P-LC
P-LC-PC
P-LC-SS

AREA

Dimensions
EWF & WP

A

C

FLOODLIGHTING

B

∆ Dimension
Reference

A

B

C

1

7”

5”

25-13/16”

2
3

7-5/8”
7-5/8”

4-1/2”
5-5/8”

49-13/16”
49-13/16”

4

7-5/8”

4-1/2”

97-13/16”

5

7-5/8”

5-5/8”

97-13/16”

6
7

7-5/8”
7-5/8”

4-1/2”
5-5/8”

52”
52”

8
9

7-5/8”
7-5/8”

4-1/2”
5-5/8”

102”
102”

SPECIALTY

EWF Models

WP Models

108

EWF296SL-120ESB

Fluorescent

Specialty Fluorescent Lighting

Watts

Ballast

Surface Mount*
Catalog No.

HIGHBAY

Size

Corner Mount*
Catalog No.

Rapid Start

Surface Mount

1x40
1x32
2x32
2x32

Magnetic
Electronic
Magnetic
Electronic

SLS140RS-120
SLS132RS-120-ESB
SLS240RS-120
SLS232RS-120-ESB

SLC140RS-120
SLC132RS-120-ESB
SLC240RS-120
SLC232RS-120-ESB

SLS140LT-120
SLS240LT-120

SLC140LT-120
SLC240LT-120

LOWBAY

48”
48”
48”
48”

SLS

Low Temperature
48”
48”
Corner Mount

SLC & SLS
Correctional Facility Luminaire
for High Abuse Environments

Magnetic
Magnetic

* 277V replace -120 with -277

Options
Description

Suffix

Tamper Proof Hardware
Acrylic Lens

- TP

Description

Housing

- ACY

Energy Saving Ballast

See above

Night Light

Suffix

Stainless Steel - SS
14 Gauge Steel - 14
120 Volt Only - NL

Electronic Ballast
For “232” or “432” models (T8 lamp) only
Replace “ESB” with - ETB

PARKING & CANOPY

For Medium Security Facilities
•One and two lamp fluorescent in a housing designed to
withstand severe abuse.

COMMERCIAL & RETAIL

SLC

1x40
1x40

Construction
•16 gauge steel housing is standard,
•14 gauge and stainless steel housings are optional.
•U.V. stabilized polycarbonate lens, with an optional
acrylic lens for light duty applications.
•Baked epoxy finish.

Dimensions

•Closed cell neoprene gasket.

SLC

SECURITY

5-1⁄4”

2-1⁄4”

5-1⁄4”
7-5⁄16”

50-3⁄16”

4-1⁄2”

50-3⁄16”

SLS

7-5⁄16”

AREA
FLOODLIGHTING
SPECIALTY
109

HIGHBAY

Mine and Process Facilit y Lighting

LOWBAY

Designed for the diversified environmental conditions associated with underground mining
and processing facilities where low illuminance levels are required
For wall, ceiling or pendant mounting

COMMERCIAL & RETAIL

MineLiter
Enclosed design for drifts, drill stations, conveyor systems, ramps and storage areas
Standard steel or optional stainless steel housing for corrosive areas

SPECIALTY

FLOODLIGHTING

AREA

SECURITY

PARKING & CANOPY

Up to 100-watt H.I.D. lamp

110

MineLighter

Mine & Process Facility Luminaire
Base

Ceiling or
Messenger Cable Mount

Medium
“
“

ML50MH-volts
ML70MH-volts
ML100MH-volts

HIGHBAY

Lamp
Watts

NEW

Metal Halide
50
70
100

LOWBAY

High Pressure Sodium
35
50
70
100

ML35HP-volts
ML500HP-volts
ML70HP-volts
ML100HP-volts

Medium
“
“
“

COMMERCIAL & RETAIL

ML
Minelighter

ML

Voltage Suffix: change “volts” to – 35 & 50W “- 277” 277V
70 & 100W “- QT” Quad Tap: 120V, 208V, 240V, 277V
“- TT” Tri Tap: 120V, 277V, 347V

Weatherproof

Optics
•Lens is up to 85% efficient. Acrylic for metal halide
lamps and polycarbonate for high pressure sodium.

Options
Description

Suffix

Cord & U-Ground Plug
Stainless Steel Construction

PARKING & CANOPY

Applications
•MineLighter is specifically designed for the diversified
environmental conditions associated with underground
mining and processing facilities including such areas as
drifts, drill stations, conveyor systems, ramps and storage
areas.

3 foot cord - 3C-MP
- SS

Lens
With metal halide lamps
Acrylic
With high pressure sodium lamps Polycarbonate

•MineLighter has approximately 10% uplight for improved
visibility and visual comfort.
•Hinging for easy access to the lamp and wiring
compartment.

SECURITY

Construction
•Heavy duty steel or stainless steel continuous seam
welded construction. Stainless steel is available for
corrosive environments

Dimensions
ML

•Hinged lens with snap action clips for access to the lamp
and wiring compartment for easy relamping and
installation.

16-9⁄16”

8-3⁄8”
7-7⁄8”

•A 1⁄2” conduit or cable entry is provided for wiring.

•Mounting bracket allows flush ceiling mounting

4”
7-3⁄8”

7-3⁄8”
14-9⁄16”

AREA

Mounting
•Low 73⁄8” profile requires minimal ceiling space.

5”

•“U” clamp the MineLighter to a messenger cable.
Finish
•White epoxy powder paint, for corrosion resistance.

FLOODLIGHTING

Ballasts
•High power factor ballast.

SPECIALTY
111

112

SPECIALTY

FLOODLIGHTING
AREA

SECURITY
PARKING & CANOPY
COMMERCIAL & RETAIL
LOWBAY
HIGHBAY

AccuLite Lighting Layout
HIGHBAY

1. Project Information
Job Name: ________________________________
Tel: ______________

Engineer: ________________________________

Tel: ______________

Obstructions
ie: Aisles, machinery on floor / Ducts, pipes,
A-C in ceiling / other

Distributor: ________________________________

Tel: ______________

______________________________________________________________

Contractor: ________________________________

Tel: ______________

______________________________________________________________

Sales Rep: ________________________________ Tel: ______________

❑

3. About the Existing Luminaire
Existing Fixture ____________________ Manufacturer _________________

2A.
Outdoor: About the space
____________________________________________________________

Ceiling
Height

Light Source

Indoor: About the space

Length: ______ Width: ______ Ceiling Height: _______

Luminaire
Mounting
Height

Lamps Per Fixture ______ Mounting Height ______ Light Levels ______

Installation Details
Ceiling
Mounting
Height: ______
Height: ______

4. About the Acculite Luminaire
Preferred Luminaire ______________________________

❑ Rigid Mount ❑ Flexible Mount

Work
Plane: ______

Light Source
Reflectances
Ceiling: ______

❑ Metal Halide ❑ High Pressure Sodium ❑ Other __________________
Walls: ______

PARKING & CANOPY

Work Plane

Floors: ______
5. Drawings Supplied

Color
Ceiling: ______
Rate area as

❑ Metal Halide ❑ High Pressure Sodium
❑ Other _________________________

COMMERCIAL & RETAIL

❑

2B.
Room :

Walls: ______
Clean:

Required Light Level:

Floors: ______

1
2
3
4
5
Dirty
Initial
Maintained
Footcandles: __________ Lux: __________

❑

❑

LOWBAY

Architect: ________________________________

Format

❑
❑

“.DXF” __________________________________________
“.DWG” __________________________________________

email productservices@junoltg.com

Fax 847 813 8200
6. For Layout Assistance
Tel 888 387 2212

SECURITY

7. Notes
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________

AREA

_________________________________
_________________________________
_________________________________
_________________________________
_________________________________

FLOODLIGHTING

_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________

SPECIALTY

_________________________________
_________________________________
_________________________________
_________________________________

113

114

SPECIALTY

FLOODLIGHTING
AREA

SECURITY
PARKING & CANOPY
COMMERCIAL & RETAIL
LOWBAY
HIGHBAY

USA
1300 S. Wolf Road • P.O. Box 5065 • Des Plaines, IL 60017-5065
AccuLite Customer Service • PHONE (847) 827-9880 • FAX (847) 827-2925
Regional Offices & Warehouses: Atlanta, Dallas, Los Angeles, Philadelphia, Toronto
Visit us at www.junolightinggroup.com
Canada
219 Shoemaker Street • Kitchener, ON • Canada N2E 3B3
PHONE (800) 265-7844 • FAX (800) 594-5173 • Visit us at www.acculiteltg.com
Juno and Acculite are registered trademarks of Juno Lighting, Inc.
Products shown in this brochure are covered by U.S. and
international patents and patents pending.
Specifications subject to change without notice.
© 2005 JUNO LIGHTING INC.
Printed in U.S.A.

LIT-ACCU-CI

Rev.02/05



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2005:05:17 14:59:46Z
Modify Date                     : 2005:05:17 11:56:00-05:00
Page Count                      : 116
Creation Date                   : 2005:05:17 14:59:46Z
Mod Date                        : 2005:05:17 11:56:00-05:00
Producer                        : Acrobat Distiller 5.00 for Macintosh
Author                          : JUNO
Metadata Date                   : 2005:05:17 11:56:00-05:00
Creator                         : JUNO
Title                           : PRDGD-ACCULITE USA 3/27/02 2

EXIF Metadata provided by EXIF.tools