480484 Catalog

: Pdf 480484-Catalog 480484-Catalog 786189 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 50

Download
Open PDF In Browser	View PDF

301-314.qxp

12/23/2013

3:48 PM

Page 304

Switch & Outlet Boxes – Technical Data

CP

Article 314 of the National Electrical Code® (NEC®) covers the installation and use of boxes. The article includes table references that guide the
electrician in the selection of the proper size box necessary to safely accommodate electrical service requirements. The box capacity table is
reproduced in part from NEC as a quick reference and guide. The NEC should be consulted for complete details.
Eaton's Crouse-Hinds products are produced in accordance with the requirements of UL-514-A, UL-514-B, UL-514-C and are classified for
fire resistance according to the standard, Fire Tests of Building Construction and Materials, ANSI/UL 263, ASTM E 119 and NFPA 251. This
listing is based on products when used in a fire rated (2 HR) wall or ceiling. Eaton's Crouse-Hinds steel boxes are listed with U.L. File
#E23156 and Eaton's Crouse-Hinds non-metallic boxes are listed with U.L. File #E102328 and U.L. (2 HR. fire rated) File #R9933.
Eaton's Crouse-Hinds switch and outlet boxes comply with the requirements of NEMA standard OS-1, NFPA 70-370 and Federal Spec.
#W-J-800E.
Under File #E23156, Eaton's Crouse-Hinds concentric and "Moon" KO style boxes, the following is stated "Suitable for bonding without any
additional bonding means around concentric (or Eccentric) knockouts where used in circuits above or below 250V."
Wall thickness on all steel boxes is 0.0625" with minimum galvanization thickness of G60.

Table 314.16(A) Metal Boxes
Box Dimension, Inches

Min.
Cu. In.

Maximum Number of Conductors (arranged by AWG size)

Trade Size or Type

Cap.

No.
18

No.
16

No.
14

No.
12

No.
10

No.
8

No.
6

4 x 11/4 Round or Octagonal
4 x 11/2 Round or Octagonal
4 x 21/8 Round or Octagonal
4 x 11/4 Square
4 x 11/2 Square
4 x 21/8 Square
411/16 x 11/4 Square
411/16 x 21/2 Square
411/16 x 21/8 Square
3 x 2 x 11/2 Device
3 x 2 x 2 Device
3 x 2 x 21/4 Device
3 x 2 x 21/2 Device
3 x 2 x 23/4 Device
3 x 2 x 31/2 Device
4 x 21/8 x 11/2 Device
4 x 21/8 x 17/8 Device
4 x 21/8 x 21/8 Device
33/4 x 2 x 21/2 Masonry Box/Gang
33/4 x 2 x 31/2 Masonry Box/Gang
FS-Minimum Internal Depth 13/4 Single Cover Gang
FD-Minimum Internal Depth 23/8 Single Cover Gang
FS-Minimum Internal Depth 13/4 Single Cover Gang
FD-Minimum Internal Depth 23/8 Multiple Cover Gang

12.5
15.5
21.5
18.0
21.0
30.3
25.5
29.5
42.0
7.5
10.0
10.5
12.5
14.0
18.0
10.3
13.0
14.5
14.0
21.0
13.5
18.0
18.0
24.0

8
10
14
12
14
20
17
19
28
5
6
7
8
9
12
6
8
9
9
14
9
12
12
16

7
8
12
10
12
17
14
16
24
4
5
6
7
8
10
5
7
8
8
12
7
10
10
13

6
7
10
9
10
15
12
14
21
3
5
5
6
7
9
5
6
7
7
10
6
9
9
12

5
6
9
8
9
13
11
13
18
3
4
4
5
6
8
4
5
6
6
9
6
8
8
10

5
6
8
7
8
12
10
11
16
3
4
4
5
5
7
4
5
5
5
8
5
7
7
9

4
5
7
6
7
10
8
9
14
2
3
3
4
4
6
3
4
4
4
7
4
6
6
8

2
3
4
3
4
6
5
5
8
1
2
2
2
2
3
2
2
2
2
4
2
3
3
4

Table 314.16(B) Volume
Required per Conductor
Size of
Conductor

Free Space
Within Box for
Each Conductor

No.
No.
No.
No.
No.
No.
No.

1.5 cubic inches
1.75 cubic inches
2 cubic inches
2.25 cubic inches
2.5 cubic inches
3 cubic inches
5 cubic inches

18
16
14
12
10
8
6

For SI units: one cubic inch = 16.4 cm3.
Reprinted with permission from NFPA 70-2005, the National Electrical Code®, Copyright® 2005 National Fire Protection Association, Quincy MA 02269. This reprinted material is not the
complete and official position of the National Fire Protection Asociation, on the referenced subject which is represented only by the standard in its entirety.
National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Inc., Quincy, MA 02269.

304

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

301-314.qxp

12/23/2013

3:48 PM

Page 305

Switch & Outlet Boxes – Technical Data

EATON'S CROUSE-HINDS OUTLET BOXES & COVERS
Eaton's Crouse-Hinds has assembled one of the most complete outlet box products
lines in the business. We’ve been leading in quality and selection for decades and
throughout the Eaton's Crouse-Hinds Steel Outlet Box offering, you will find innovative
products and solutions that save labor, cut material costs and increase productivity.
CP

We have a complete offering of:
• 4" and 411/ 16" square drawn and welded boxes
• 4" square and 411/ 16", switch, masonry, utility, outlet, ceiling, fan and gangable boxes
• Drawn boxes available with concentric knockouts, combining 1/ 2" and 3/ 4" knockout
• Complete line of covers, partitions, extension rings and accessories
• Uni-Mount™ covers
• PRE-formance™ products
• Pre-assembled boxes which includes Uni-Mount cover attached to 4" square box
• Pre-fabricated boxes which includes Uni-Mount cover attached to 4" square box with
ground screw and lead installed
• Fire alarm boxes and covers

Standard Materials - Steel Covers, Outlet, and Switch Boxes:
• Steel boxes and covers are made of .0625 inch thick pre-galvanized sheet steel
• Handy box covers are made of .030 inch thick galvanized sheet steel

BRACKETS USED ON EATON'S CROUSE–HINDS BOXES

"F" BRACKET

"D" BRACKET

"S" BRACKET

"C" BRACKET

Mounts on face of stud. See
catalog number for set back. For
wood studs.

Side mount bracket with set up
hook & guide tabs for automatic
positioning. Standard bracket set
back is 5/ 8". For wood and metal
studs.

Side mount brackets with set up
hook for wood or metal studs.
Standard bracket set back is 5/ 8".

Ceiling box bracket for wood
studs.

"VS" BRACKET

"VMS" BRACKET

"VP" BRACKET

Plain flat mounted bracket for use Side bracket for use with wood or Side bracket with set up hooks for
on wood or metal studs. No set metal studs. Provides set up tabs
wood studs.
back.
to position on face of stud.

"SSB" BRACKET
Positions box on either side of a
steel stud.

"MSB" BRACKET
Position box on either side of
steel stud.
www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

305

301-314.qxp

12/23/2013

3:48 PM

Page 306

Switch & Outlet Boxes – Technical Data

CLAMPS USED ON EATON'S CROUSE-HINDS BOXES

CP

Cat. # TP900

MC-BX
FOR ARMORED & METAL CLAD
(MCI) CABLE

NM-1

NM-2
FOR NONMETALLIC CABLE

NM-4

MOUNTING EARS
Cat. # TP901

Cat. # TP902

ONE SCREW EAR

TWO SCREW EAR

Mounting ears are available on many of our switch boxes. They are set forward in 1/16" the "old way" position. Two-screw ears are
generally used on shallow boxes and one-screw ears on deep boxes.

EATON'S CROUSE-HINDS BOX ENTRY DETAILS

/2" Conduit KO

/4" Conduit KO

1

3

1" Conduit KO

Concentric 1/2" and 3/4" KO Eccentric 1/2" and 3/4" KO

Cable Pry-outs Always in Pairs.

Knockouts and Pry-outs
Eaton's Crouse-Hinds conduit KOs have standard trade size dimensions. KOs are uniform and true for attachment of cable or conduit
connectors. Pry-outs for cable entrance are slotted – a twist with screwdriver removes them. KOs and pry-outs are precision stamped to
permit easy removal, but remain sufficiently strong and sturdy when not removed.
Eaton's Crouse-Hinds 4" square drawn boxes feature a 1/ 2" and 3/ 4" "inverted" concentric KO – easily removed. Our 4" square welded feature
our 1/ 2" eccentric KO which also features easy removability of both the 1/ 2" and 3/ 4" KOs.
Note: These KOs are suitable for bonding without bonding jumpers around concentric (or eccentric) knockouts where used in circuits above or below 250V.

306

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

301-314.qxp

12/23/2013

3:48 PM

Page 307

Steel Square Boxes

4" SQUARE OUTLET BOXES AND COVERS

Features:
• Ideal for exposed work applications, providing an easy method for
the installation of electrical devices (switches, receptacles, fans,
lights, etc.)
• Raised ground screw location in the welded boxes saves time in
installation

CP

• Available with pre-installed ground screws and pigtails for
increased labor savings
• Knockouts are suitable for use without a bonding jumper in circuits
above or below 250 volts
• Available in two depths for differing cubic capacity requirements
• Welded or drawn construction to match customer preference
• Extensive cover offering to meet various customer applications
and needs

Applications:

Certifications and Compliances:

• For use with conduit
• Available in red for fire alarm applications

• UL Listed

4" SQUARE OUTLET BOXES – 18.0 CUBIC INCH CAPACITY
11/4" DEEP – FOR CONDUIT
UL LISTED

TP408
KNOCKOUTS
Cat. #

Bracket

Description

Sides

TP408

—

Drawn

12 – 1/2"

www.crouse-hinds.com

US: 1-866-764-5454

Bottom
5 – 1/2"

CAN: 1-800-265-0502

Unit Qty.

Wt. Lbs. Per 100

50

61

Copyright© 2013 Eaton’s Crouse-Hinds Business

307

301-314.qxp

12/23/2013

3:48 PM

Page 308

Steel Square Boxes

4" SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY (WELDED)†
21.0 CUBIC INCH CAPACITY (DRAWN)

CP

11/ 2" DEEP – FOR CONDUIT
UL LISTED

TP404/TP404PF

TP404SSB

TP404MSB

TP404RED

TP423

TP469

TP830*

TP405

TP412
TP839*

TP410

TP414RED

TP414

TP418

TP423RED

TP40SPF

KNOCKOUTS
Cat. #
TP40SMSB

TP40SMSBPF*†
TP40SPF§
TP404**
TP404MSB
TP404RED
TP404REDMSB
TP404PF‡**
TP404SSB
TP425**
TP423**
TP423RED
TP405
TP405MSB
TP410
TP410MSB
TP412
TP412MSB
TP414
TP414MSB
TP414RED
TP414REDMSB
TP418
TP467
TP467MSB
TP469

Metal Stud
Sizes

Bracket

Description

Sides

—
—
—
—
—
—
—
—
—
All
All
All
—
—
—
—
—
—
—
—
—
—
—
—
—
ALL

MSB
MSB
—
—
MSB
—
MSB
—
SSB
"VP"
"VMS"
"VMS"
—
MSB
—
MSB
—
MSB
—
MSB
—
MSB
"F", Set Flush
—
MSB
"VMS"

Welded
Welded/Open Back
Welded/Open Back
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Welded
Welded
Welded
Welded

8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
6 – 1/ 2", 3
6 – 1/ 2", 3
6 – 1/ 2", 3
4 – 1/ 2", 6
4 – 1/ 2", 6
12 – 1/ 2"
12 – 1/ 2"
8 – 3/ 4"
8 – 3/ 4"
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
8 – 1/ 2", 4
6 – 1/ 2", 3
8 – 3/ 4"
8 – 3/ 4"
6 – 3/ 4"

—
—

—
—

Drawn
Drawn

8 – 1/ 2", 4 – 3/ 4"
8 – 3/ 4" C

Bottom
–
–
–
–
–
–
–
–
–
–
–
–
–
–

–
–
–
–
–

/ 2"
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
1

+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
+ 3/ 4" E
& 3/ 4" C
& 3/ 4" C

/ 4"
/ 4"
/ 4"
3
/ 4"
1
/ 2" + 3/ 4" E
3
3
3

2
2
2
2
2
2
2
2
2
2
2
2
3
3
5
5
3
3
3
3
3
3
2
2
2
2

–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–

/ 2",
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2"
1
/ 2"
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
/ 2",
1
1

2
2
2
2
2
2
2
2
2
2
2
2
2
2

–
–
–
–
–
–
–
–
–
–
–
–
–
–

1

/ 2"
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"
3
/ 4"
3
/ 4"

2
2
2
2
2
2
2
2
2
2

–
–
–
–
–
–
–
–
–
–

3

1

/ 4"
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
1
/ 2"
1
/ 2"
1
/ 2"
1
/ 2"

+
+
+
+
+
+
+
+
+
+
+
+

3

/ 4"
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"
3
/ 4"

E
E
E
E
E
E
E
E
E
E
E
E

+
+
+
+

3

/ 4"
/ 4"
/ 4"
3
/ 4"

E
E
E
E

3

3

3
3

Unit
Qty.

Wt. Lbs.
Per 100

25
25
25
50
25
50
25
50
50
25
25
25
50
25
50
50
50
25
50
25
50
25
25
50
25
25

102
102
104
72
83
72
83
72
83
82
81
81
67
78
67
67
67
78
67
78
67
83
84
72
78
81

50
50

72
72

Air Plenum
TP830*
TP839*

3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"

*For Air Plenum (No Mounting Holes) - Not UL Listed
**cUL Listed
†All welded 4" square outlet boxes have a raised dimple for ground screw
‡TP404PF includes ground screw with pigtail lead
§TP40SPF supplied with factory installed pigtail leads and TP472 flat back cover

308

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

301-314.qxp

12/23/2013

3:48 PM

Page 309

Steel Square Boxes

4" SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY
11/2" DEEP
FOR NONMETALLIC CABLE – CLAMPS IN EACH END
UL LISTED
CP

TP444MSB

TP444

TP446

TP449

KNOCKOUTS
Cat. #

Bracket

Description

Sides

TP444
TP444MSB
TP444SSB
TP446
TP449

—
MSB
SSB
"F", Set Flush
"VMS"

Welded
Welded
Welded
Welded
Welded

4
4
4
4
4

–
–
–
–
–

Bottom

Cable,
Cable,
Cable,
Cable,
Cable,

4
4
4
2
2

–
–
–
–
–

/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 1 – 1/2" & 3/4" E
1
/2", 1 – 1/2" & 3/4" E
1

1
1
1
1
1

–
–
–
–
–

/2"
1
/2"
1
/2"
1
/2"
1
/2"
1

Unit Qty.

Wt. Lbs. Per 100

50
25
50
25
25

77
81
88
88
85

4" SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY
11/2" DEEP
FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
UL LISTED

TP454

TP454MSB

Cat. #

Bracket

Description

KNOCKOUTS
Sides

TP459
TP454*
TP454MSB
TP454PF†
TP454SSB*
TP456*
TP456PF†

"VMS"
—
MSB
—
SSB
"F", Set Flush
"F", Set Flush

Welded
Welded
Welded
Welded
Welded
Welded
Welded

4
4
4
4
4
4
4

–
–
–
–
–
–
–

TP459

TP456

Cable,
Cable,
Cable,
Cable,
Cable,
Cable,
Cable,

2
4
4
4
4
2
2

–
–
–
–
–
–
–

Bottom

/2", 1 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 1 – 1/2" & 3/4" E
1
/2", 1 – 1/2" & 3/4" E
1

1
1
1
1
1
1
1

–
–
–
–
–
–
–

/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1

Unit Qty.

Wt. Lbs. Per 100

25
50
25
50
25
25
25

89
81
91
81
82
92
92

†TP catalog numbers ending in PF includes ground screw with pigtail lead
*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

309

301-314.qxp

12/23/2013

3:49 PM

Page 310

Steel Square Boxes

4" SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8" DEEP WITH CONDUIT KOs

CP

UL LISTED

TP403MSB

TP403/TP403PF

TP403SSB

TP432

TP432VMS

TP434

TP438
TP831*

TP403RED

TP434RED

TP451RED

TP451

TP40DPF

KNOCKOUTS
Cat. #

Bracket

Description

Sides

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP40DMSB
TP40DMSBPF
TP40DPF§
TP403**
TP403MSB
TP403RED
TP403REDMSB
TP403PF†**
TP403SSB
TP432**
TP432MSB
TP432REDMSB
TP432VMS
TP436
TP436MSB
TP434
TP434MSB
TP434RED
TP434REDMSB
TP438
TP438MSB
TP438PF†
TP451
TP451PF†
TP451RED
TP437

MSB
MSB
—
—
MSB
—
MSB
—
SSB
—
MSB
MSB
"VMS"
—
MSB
—
MSB
—
MSB
—
MSB
—
"VMS"
"VMS"
"VMS"
"VMS"

Welded
Welded
Welded/Open Back
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Welded
Welded
Welded
Welded

8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 1/ 2", 4 – 1/ 2" & 3/ 4" E
8 – 3/ 4"
8 – 3/ 4"
8 – 3/ 4"
6 – 3/ 4"
8 – 1"
8 – 1"
8 – 1/ 2", 4 – 3/ 4"
8 – 1/ 2", 4 – 3/ 4"
8 – 1/ 2", 4 – 3/ 4"
8 – 1/ 2", 4 – 3/ 4"
4 – 1/ 2", 6 – 1/ 2" & 3/ 4" C
4 – 1/ 2", 6 – 1/ 2" & 3/ 4" C
4 – 1/ 2", 6 – 1/ 2" & 3/ 4" C
6 – 1/ 2", 3 – 1/ 2" & 3/ 4" E
6 – 1/ 2", 3 – 1/ 2" & 3/ 4" E
6 – 1/ 2", 3 – 1/ 2" & 3/ 4" E
6 – 1/ 2", 3 – 1/ 2" & 3/ 4" E

2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"
3 – 1/ 2", 2 – 3/ 4"
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E
2 – 1/ 2", 2 – 1/ 2" & 3/ 4" E

25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25

91
112
92
84
95
84
95
84
95
84
95
95
99
84
95
84
95
84
95
84
95
84
96
96
96
98

—

Drawn

8 – 1/ 2", 4 – 3/ 4"

3 – 1/ 2", 2 – 3/ 4"

25

90

Air Plenum
TP831*

*For Air Plenum (No Mounting Holes) - Not UL Listed
†TP catalog numbers ending in PF includes ground screw with pigtail lead
**cUL Listed
§TP40DPF supplied with factory installed pigtail leads and TP472 flat back cover

310

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

301-314.qxp

12/23/2013

3:49 PM

Page 311

Steel Square Boxes

4" SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8" DEEP
FOR NONMETALLIC CABLE – CLAMPS IN EACH END
UL LISTED
CP

TP450

TP450MSB

TP450SSB

TP452

KNOCKOUTS
Cat. #

Bracket

Description

Sides

TP450
TP450MSB
TP450SSB
TP452

—
MSB
SSB
"VMS"

Welded
Welded
Welded
Welded

4
4
4
4

–
–
–
–

Cable,
Cable,
Cable,
Cable,

4
4
4
2

–
–
–
–

/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 1 – 1/2" & 3/4" E
1

Bottom
– 1/2"
– 1/2"
– 1/2"
– 1/2"

1
1
1
1

Unit Qty.

Wt. Lbs. Per 100

25
25
25
25

90
101
101
104

4" SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8" DEEP
FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
UL LISTED

TP431MSB

TP431

TP440

KNOCKOUTS
Cat. #

Metal Stud Sizes

Bracket

Description

Sides

TP431*
TP431PF†
TP431MSB
TP431SSB*
TP440*

—
—
—
—
All

—
—
MSB
SSB
"VMS"

Welded
Welded
Welded
Welded
Welded

4
4
4
4
4

–
–
–
–
–

Cable,
Cable,
Cable,
Cable,
Cable,

4
4
4
4
2

–
–
–
–
–

/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 2 – 1/2" & 3/4" E
1
/2", 1 – 1/2" & 3/4" E
1

Bottom
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"

1
1
1
1
1

Unit Qty.

Wt. Lbs. Per 100

25
25
25
25
25

91
91
91
102
103

†TP catalog numbers ending in PF includes ground screw with pigtail lead
*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

311

301-314.qxp

12/23/2013

3:49 PM

Page 312

Steel Square Boxes & Covers

4" SQUARE TWO–DEVICE BOXES – 30.3 CUBIC INCH CAPACITY
21/8" DEEP

CP

UL LISTED

TP391

TP395
KNOCKOUTS

Cat. #

Bracket

Description

Sides

Bottom

Std. Unit Pkg.

Wt. Lbs. Per 100

TP391
TP395

"VS", Set 7/8"
—

Drawn
Drawn

6 – 1/2", 3 – 3/4"
8 – 1/2", 4 – 3/4"

3 – 1/2", 2 – 3/4"
3 – 1/2", 2 – 3/4"

25
25

95
84

4" SQUARE EXTENSION RINGS
11/ 2" DEEP WITH CONDUIT KNOCKOUTS – 21.0 CUBIC INCH CAPACITY
21/8" DEEP WITH CONDUIT KNOCKOUTS – 30.3 CUBIC INCH CAPACITY
UL LISTED

TP422†

TP424
Cat. #
11/2" DEEP
TP424
TP422
TP426
TP428
TP428RED
TP833*

TP426

TP428RED

TP443 (21/8" Deep)

TP428, TP833*

KNOCKOUTS
Sides

Bottom

Unit Qty.

Wt. Lbs. Per 100

12 – 1/2"
8 – 1/2", 4
8 – 3/4"
8 – 1/2", 4
8 – 1/2", 4
8 – 1/2", 4

– 3/4"
– 3/4"
– 3/4"

—
—
—
—
—
—

50
50
50
50
50
50

46
50
46
46
46
48

8 – 1/2", 4 – 3/4"
8 – 1"

—
—

25
25

66
60

– 1/2" + 3/4" E

21/8" DEEP
TP443
TP465

*For Air Plenum (No Mounting Holes). Requires the use of TP854, purchase separately - Not UL Listed
†For use as extension with switch box, not four square box

FLEXIBLE FIXTURE HANGERS

Certifications and Compliances:

Eaton's Crouse-Hinds TPSFH square flexible fixture hangers are used in
commercial or light industrial applications where HID high bay and low
bay lighting fixtures are used. Specific applications include storage
facilities, shipping warehouses, retail and DIY facilities.

• UL Listed – UL 1598
• CSA C22.2 No. 250
• Suitable for Damp Locations

Features and Benefits:
• Suitable for use with 1/2" or 3/4" fixture conduit stems these hangers
allow the conduit stem of the fixture (luminaire) to swing in any
direction. Maximum swing angle is 26° from vertical max slope
angles 221/2°

Standard Materials and Finishes:
• Material: Sheet Steel
• Finish: Zinc Chromate for corrosion resistance

• Available for attachment to 4" square steel boxes.
• Quickly and easily attached by two screws.

Description

• Hangers are drilled and tapped for use with /4" conduit stem as
standard and come supplied with a 3/4" – 1/2" reducer for 1/2"
conduit stem applications.

Support
Wt. (lbs)

Cat. #

50

TPSFH12

3

312

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

For use with
4" Square
boxes
Copyright© 2013 Eaton’s Crouse-Hinds Business

301-314.qxp

12/23/2013

3:49 PM

Page 313

Steel Square Covers

COVERS FOR 4" SQUARE BOXES – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
#8-32 screw used on covers

CP

TP472

TP472RED

TP474

TP478
TP487

TP473, TP475,
TP476, TP477,
TP479, TP483
Unit Qty.

TP850*

TP854*

AMR0

Cat. #

Description

Wt. Lbs. Per 100

Capacity Cu. In.

TP472†
TP472RED
TP474†
TP478†
TP487†
TP473†
TP476†
TP477†
TP475†
TP479†
TP483†
AMR0**

Flat Blank
Flat Blank
Flat Blank, Open With Ears 23/4"
Flat with 1/2" ko
Flat with 3/4" ko
Raised 1/4", Open With Ears 23/4"
Raised 1/2", Open With Ears 23/4"
Raised 5/8", Open With Ears 23/4"
Raised 3/4", Open With Ears 23/4"
Raised 1", Open With Ears 23/4"
Raised 11/4", Open With Ears 23/4"
3
/4" - 11/2" Round Adjustable Mud Ring

50
50
50
50
50
50
50
50
25
25
25
25

31
31
21
31
29
23
26
27
31
34
37
44

—
—
—
—
—
1.3
4.0
5.0
6.0
7.0
8.5
6.1

Flat Blank Gasketed With Captive Screws
Flat Ring Double Gasketed

25
25

31
12

—
—

Air Plenum
TP850*
TP854*

*For Air Plenum (No Mounting Holes) - Not UL Listed
†CSA Certified
**ETL Listed

MUD RINGS FOR 4" SQUARE STEEL OUTLET BOXES
UL LISTED

TP480

TP482, TP484,
TP486, TP489

TP494

TP488, TP490

TP496, TP499,
TP500, TP501,
TP502

AMR1

AMR2

Cat. #
ONE DEVICE

Description

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

TP480†
TP482†
TP484†
TP489†
TP486†
TP488
TP490
AMR1**
AMR158**

Flat
1
/ 4" Raised
1
/ 2" Raised
5
/ 8" Raised
3
/ 4" Raised
1" Raised
11/ 4" Raised
3
/ 4" - 11/ 2" Raised Adjustable
5
/ 8" - 11/ 4" Raised Adjustable

50
50
50
50
50
50
25
25
25

20
21
23
26
30
34
39
47
44

—
1.8
3.8
4.3
5.5
6.8
8.5
6.0

Flat
1
/ 4" Raised
1
/ 2" Raised
5
/ 8" Raised
3
/ 4" Raised
11/ 4" Raised
1" Raised
5
/ 8" - 11/ 2" Raised Adjustable

50
50
50
50
50
25
25
25

12
13
18
22
24
31
30
50

—
3.0
6.0
8.0
9.0
14.0
11.7
11.3

AMR158

TWO DEVICE
TP494†
TP496†‡
TP498†‡
TP499†‡
TP500†‡
TP501
TP502
AMR2**

‡ Slotted design for use with 4" square box partitions
†CSA Certified
**ETL Listed

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

313

301-314.qxp

12/23/2013

3:50 PM

Page 314

Steel Square Covers

METALGUARD™ PROTECTIVE PLATES
Applications:

Material & Finish:

• For use with single-, two-, three- and four-gang commercial or residential
boxes/plaster rings; with or without devices, switches, GFCI, etc. installed
• Commercial or residential ceiling boxes

• 18 gauge steel
• Natural finish

CP

Features and Benefits:
• Seals out sheetrock mud, sanding dust and paint overspray to keep the electrical
box and its wiring free from contaminants
• Heavy duty reusable metallic plate provides mechanical protection to box and
wiring and speeds up trim process
• Easy to install. All you have to do is push them in! They come out easy—just put a
screwdriver into the slot in front, turn and pull them out
• Reduces risk of call backs and expense of rework because of wire and box damage
• MetalGuard serves as a guide for router in cutting out boxes
Cat. #

Description
Pre-Fabricated Box, Cover, Ground Screw and Lead Assembly

Std. Unit
Pkg.

Wt. Lbs.
Per 100

MGRK
MGR1
MGR2
MGR3
MGR4
MGR0
MGMR1
MGMR2
MGMR0
MGS1

Contractor Kit (120-1G, 40-2G, 20-3G, 5-4G, and 20-Rnd)
1G Residential Wire Protector
2G Residential Wire Protector
3G Residential Wire Protector
4G Residential Wire Protector
Rnd Residential Wire Protector
1G Wire Protector for Commercial MR
2G Wire Protector for Commercial MR
Rnd Wire Protector for Commercial MR
Gangable Spacer Wire Protector

1
60
20
20
5
20
50
50
50
100

-

4" SQUARE SURFACE COVERS – 5.5 CUBIC INCH CAPACITY
RAISED 1/2"
UL LISTED

TP503

TP504

TP506

TP508

TP510

TP512

TP516

TP509 (4 Screws)
TP518 (2 Screws)

TP513

TP511

TP515

TP517

TP507, TP514
TP519

Cat. #

Description

Unit Qty.

Wt. Lbs. Per 100

TP503†
TP504†
TP506†
TP508†
TP510†
TP512†
TP507†
TP514†
TP519†
TP516†
TP509†
TP518†
TP513†
TP511†
TP515†
TP517†

Raised Blank
For One Toggle Switch, One Single Receptacle 113/32" Dia.
For One Toggle Switch, One Duplex Receptacle
For Two Toggle Switches
For Two Duplex Receptacles
For One Toggle Switch
For One 20 Amp, Single Receptacle 119/32" Dia.
For One Single Receptacle 113/32" Dia.
For One 30 Amp. Twist-Lock Single Receptacle 123/32" Dia.
For One Duplex Receptacle
For One 30 – 60 Amp. Receptacle (4-wire) 27/16" Dia.
For One 30 – 50 Amp. Receptacle 29/64" Dia.
For One GFCI Receptacle
For Two GFCI Receptacles
For One Toggle Switch, One GFCI Receptacle
For One Duplex Receptacle, One GFCI Receptacle

50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

35
31
31
35
26
35
37
34
37
31
23
34
31
26
31
26

† CSA Certified

314

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

315-321.qxp

12/16/2013

4:18 PM

Page 315

Steel Square Boxes

UNI-MOUNT™ COVERS
The Unimount combines the features of a mounting device plate with those
of a box support; giving you one universal plate for all of your needs.
Specifically designed for use with metal or wood studs:

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

CP

The new and improved version incorporates four small holes on the left side
(support side) of the bracket. These holes allow for the attachment of box
mounting brackets to allow for use of both sides of the stud. The holes are
strategically located to accept either the B-Line BB423 bracket or the
Caddy H23 bracket. Additionally, the viewing hole has been significantly
enlarged (and is now diamond shaped) to make it even easier to find mark
lines on the stud.

Guide tabs ensure consistent alignment on stud
Stud alignment hole ensures consistent mounting height
Rigid bracket design eliminates the need for far side support
Available as a single or two device cover
Universal design fits all 4" square boxes
Available in 1/ 2", 5/ 8" and 3/ 4" raised
Can be ordered preassembled to popular 4" square boxes
Fast and easy installation
Can be used in multiple applications, resulting in less items to
stock
Less labor intensive
Less material handling
No multiple assemblies to handle
Can be used in Class II communications outlets for low voltage
without a box
UL Listed and CSA certified*
UL File No. E-23156

Single Gang

Two Gang

Cat. #
SINGLE GANG

Description

Capacity Cu. In.

Unit Qty.

Wt. Lbs. Per 100

TP30000
TP31000
TP32000

1

/2" Raised
/8" Raised
3
/4" Raised

3.8
4.3
5.5

50
50
50

43
46
50

5

TWO GANG
TP35000
TP36000
TP37000

1

/2" Raised
6
/8" Raised
8
3
/4" Raised
9
LOW PROFILE SCREWS - REDUCES RISK OF SHEETROCK BULGE

50
50
50

38
52
54

TP710

L.P. Screws

1000

.5

5

—

* CSA requires a far side support.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

315

315-321.qxp

12/16/2013

4:19 PM

Page 316

Steel Square Boxes

TILE WALL COVERS FOR 4" SQUARE BOXES – CUBIC INCH CAPACITY (SEE BELOW)

CP

UL LISTED

TP524

TP534

TP540

Applications:
• Typically used with tile or brick
Cat. #
ONE DEVICE

Description

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

TP520
TP522
TP524
TP526
TP528
TP530

1

/2" Raised
/4" Raised

50
50
50
25
25
25

30
36
40
46
50
62

3.7
5.5
7.4
9.3
11.0
14.8

10
10
10
10
10
10

24
30
36
44
50
66

5
7.8
10.3
13
15.5
20.8

3

1" Raised
11/4" Raised
11/2" Raised
2" Raised

TWO DEVICE
/2" Raised
/4" Raised

TP532
TP534
TP536
TP538
TP540
TP542

1
3

1" Raised
11/4" Raised
11/2" Raised
2" Raised

4" SQUARE BOX PARTITIONS

TP860

TP861

TP862

Cat. #
Description
FOR 11/2" DEEP BOX WITH SQUARE CUT TILE WALL TWO-GANG COVERS
For 1/2", 3/4", 1" Raised Covers
TP860
For 11/4", 11/2", 2" Raised Covers
TP861
FOR 21/8" DEEP BOX WITH SQUARE CUT TILE WALL TWO-GANG COVERS
For 1/2", 3/4", 1" Raised Covers
TP862
For 11/4", 11/2", 2" Raised Covers
TP863

316

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

TP863

Unit Qty.

Wt. Lbs. Per 100

25
25

13
18

25
25

16
21

Copyright© 2013 Eaton’s Crouse-Hinds Business

315-321.qxp

12/16/2013

4:19 PM

Page 317

Steel Square Boxes

411/ 16" SQUARE OUTLET BOXES AND COVERS
Applications:

CP

• For use with conduit
• For use in commercial and industrial applications, where larger
sized conductor or wiring devices are needed and additional
volume is required
• Available in red for fire alarm applications

Features:
• Ideal for exposed work applications, providing an easy method for
the installation of electrical devices (switches, receptacles, fans,
lights, etc.)
• Raised ground screw location in the welded boxes saves time in
installation

Certifications and Compliances:

• Concentric knockouts have a 1/2" and 3/4" knockout in the same
location for customer flexibility

• UL Listed

• Knockouts are suitable for use without a bonding jumper in circuits
above or below 250 volts
• Available in two depths for differing cubic capacity requirements
• Welded or drawn construction to match customer preference
• Extensive cover offering to meet various customer applications
and needs

411/16" SQUARE OUTLET BOXES – 29.5 CUBIC INCH CAPACITY
11/2" DEEP WITH CONDUIT KOs
UL LISTED

TP523

TP549

TP548
KNOCKOUTS

Cat. #
Description
29.5 CUBIC INCH CAPACITY

Sides

Bottom

TP523
TP523PF†
TP548
TP548MSB
TP549
TP549MSB

12 – 1/2" & 3/4" C
12 – 1/2" & 3/4" C
8 – 1/2", 4 – 3/4"
8 – 1/2", 4 – 3/4"
6 – 1/2", 6 – 1/2" & 3/4" C
6 – 1/2", 6 – 1/2" & 3/4" C

2
2
3
3
3
3

Welded
Welded
Drawn
Drawn
Drawn
Drawn

–
–
–
–
–
–

/2", 2 – 3/4"
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
1

Unit Qty.

Wt. Lbs. Per 100

25
25
25
25
25
25

99
99
84
95
84
95

†TP catalog numbers ending in PF includes ground screw with pigtail lead

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

317

315-321.qxp

12/16/2013

4:19 PM

Page 318

Steel Square Boxes

411/16" SQUARE OUTLET BOXES – 42.0 AND 44.0 CUBIC INCH CAPACITY
21/8" DEEP WITH CONDUIT KOs

CP

UL LISTED

TP563

TP554
TP842*

TP556
TP832*

TP556RED

TP558
TP835*

TP560
TP836*

TP562

TP557

TP521

TP525

KNOCKOUTS
Cat. #
Description
42.0 CUBIC INCH CAPACITY

Brackets

Sides

TP563
TP563MSB
TP554
TP554MSB
TP556
TP556PF†
TP556MSB
TP556RED
TP556REDMSB
TP558
TP558MSB
TP558REDMSB
TP560
TP560MSB
TP562‡
TP557

—
MSB
—
MSB
—
—
MSB
—
MSB
—
—
MSB
—
—
—
"VS"

6
6
8
8
8
8
8
8
8
4
4
4
8
8
4
5

—
—
—

12 – 1/2" & 3/4" C
12 – 1/2" & 3/4" C
12 – 1/2" & 3/4" E

2 – 1/2", 2 – 3/4"
2 – 1/2", 2 – 3/4"
2 – 1/2", 2 – 1/2", 3/4" E

—
—
—
—

4 – 3/4", 4 – 1"
8 – 1"
12 – 3/4"
8 – 1/2", 4 – 3/4"

3
3
3
3

Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn

Bottom

– 1/2", 6 – 1/2" & 3/4" C
– 1/2", 6 – 1/2" & 3/4" C
– 3/4"
– 3/4"
– 1/2", 4 – 3/4"
– 1/2", 4 – 3/4"
– 1/2", 4 – 3/4"
– 1/2", 4 – 3/4"
– 1/2", 4 – 3/4"
– 3/4", 4 – 1"
– 3/4", 4 – 1"
– 3/4", 4 – 1"
– 1"
– 1"
– 11/4"
– 1/ 2", 4 – 1/ 2" & 3/ 4" C

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–

/2", 2 – 3/4"
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
1

Unit Qty.

Wt. Lbs. Per 100

25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25

104
115
104
115
104
104
115
104
115
104
104
115
104
115
104
120

25
25
25

115
115
115

25
25
25
25

115
115
115
115

44.0 CUBIC INCH CAPACITY
TP521
TP521PF†
TP525**

Welded
Welded
Welded

Air Plenum
TP835*
TP836*
TP842*
TP832*

–
–
–
–

/2", 2 – 3/4"
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
1

*For Air Plenum (No Mounting Holes) - Not UL Listed
**Raised ground bump contains holes for 2 ground screws
†TP catalog numbers ending in PF includes ground screw with pigtail lead
‡Not UL Listed

318

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

315-321.qxp

12/16/2013

4:19 PM

Page 319

Steel Square Covers

411/16" SQUARE EXTENSION RINGS
11/2" DEEP WITH CONDUIT KOs - 29.5 CUBIC INCH CAPACITY
21/8" DEEP WITH CONDUIT KOs - 42.0 CUBIC INCH CAPACITY
UL LISTED
CP

TP550

Cat. #

TP564
TP837*

Description

TP564RED

KNOCKOUTS
Sides

Bottom

Unit Qty.

Wt. Lbs. Per 100

8 – 1/ 2", 4 – 3/ 4"
8 – 1/ 2", 4 – 3/ 4"

—
—

25
25

66
104

8
8
8
8

/ 2", 4 – 3/ 4"
/ 2", 4 – 3/ 4"
1
/ 2", 4 – 3/ 4"
1"

—
—
—
—

25
25
25
25

84
84
104
78

8 – 1/ 2", 4 – 3/ 4"

—

25

115

29.5 INCH CUBIC CAPACITY
TP550
TP551

42 INCH CUBIC CAPACITY
TP564
TP564RED
TP565
TP566

–
–
–
–

1
1

Air Plenum
TP837*

21/ 8" Deep

Note: *For Air Plenum (No Mounting Holes) - Not UL Listed
TP837 requires the use of TP852, purchased separately.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

319

315-321.qxp

12/16/2013

4:19 PM

Page 320

Steel Square Covers

411/ 16" SQUARE COVERS – CUBIC INCH CAPACITY (SEE BELOW)

CP

UL LISTED

TP568
TP568RED

TP574 – TP582,
TP529, TP531

TP569, TP570, TP571,
TP573, TP575

TP572

TP851*

TP852*

TP584, TP586, TP589,
TP593, TP541, TP543

Cat. #
FLAT AND RAISED

Description

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

TP568†
TP568RED
TP569‡
TP570
TP571‡
TP572†
TP573‡
TP575‡

Flat Blank
Flat Blank
1
/2" Raised, With Ears 23/4"
Raised 5/8", With Ears 23/4"
3
/4" Raised, With Ears 23/4"
Flat, With 1/2" KO
1" Raised, With Ears 23/4"
11/4" Raised, With Ears 23/4"

25
25
25
25
25
25
25
25

40
40
36
38
40
40
44
48

—
—
3.3
3.8
5.0
—
7.0
9.0

Flat Blank Gasketed Captive Screws
Flat Ring Double Gasketed

50
25

42
20

—
—

/4" Raised
/2" Raised
3
/4" Raised
5
/8" Raised
1" Raised
11/4" Raised
11/2" Raised
2" Raised

25
25
25
25
25
25
25
25

32
36
42
39
46
52
64
76

1.8
3.3
5.0
4.5
6.8
8.5
11.3
15.0

Flat
1
/4" Raised
1
/2" Raised
5
/8" Raised
3
/4" Raised
1" Raised
11/4" Raised
11/2" Raised
2" Raised

25
25
25
25
25
25
25
25
25

21
26
30
32
34
38
42
63
79

—
3.0
6.0
8.0
8.8
11.7
14.0
18.8
24.5

AIR PLENUM
TP851*
TP852*

ONE DEVICE
TP574
TP576
TP578
TP579
TP580
TP582
TP529
TP531

1
1

TWO DEVICE
TP590‡
TP583‡
TP584
TP587
TP586
TP589
TP593
TP541
TP543
*For Air Plenum (No Mounting Holes)
†CSA Certified
‡ Not UL Listed

320

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

315-321.qxp

12/16/2013

4:19 PM

Page 321

Steel Square Covers

411/16" SQUARE SURFACE COVERS – 9.0 CUBIC INCH CAPACITY
/ 2" RAISED

1

CP

TP720

TP722

TP724
TP730
TP736

TP726

TP728

TP732

TP734

TP738

TP740

Cat. #

Description

Unit Qty.

Wt. Lbs. Per 100

TP720
TP722
TP724
TP730
TP736
TP726
TP728
TP732
TP734
TP738
TP740
TP741

For
For
For
For
For
For
For
For
For
For
For
For

10
10
10
10
10
10
10
10
10
10
25
10

52
49
53
50
51
52
44
48
45
45
45
43

One Toggle Switch
One Duplex Receptacle
One Single Receptacle 113/32" Dia.
One 20 Amp Single Receptacle 1.620" Dia.
One 1.730" Dia. Power Outlet
Two Toggle Switches
Two Duplex Receptacles
One 2.125" Dia. Range/Dryer Receptacle
One 2.480" Dia. Power Outlet
One Ground Fault Interrupter
One GFI Receptacle & One Toggle
Two GFI Receptacles

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

321

322-333.qxp

12/16/2013

4:21 PM

Page 322

Steel Utility Boxes & Covers

UTILITY BOXES – CUBIC INCH CAPACITY (SEE BELOW)
4" LONG x 21/8" WIDE

CP

UL LISTED

TP591

TP588, TP647

TP592, TP600,
TP602

TP598
TP605

TP594, TP596

TP604, TP606

KNOCKOUTS
Cat. #
Bracket
11/4" DEEP – 8.5 CUBIC INCH CAPACITY

Sides

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP647

8 – 1/2"

3 – 1/2"

50

40

8 – 1/2"
5 – 1/2"

3 – 1/2"
3 – 1/2"

50
50

42
51

—

50

36

3 – 1/2"
3 – 1/2"
3 – 1/2"

50
50
50

50
50
60

—
—

50
50

41
41

3 – 1/2"
3 – 1/2"
3 – 1/2"

50
50
50

56
56
66

—

1 /2" DEEP – 10.3 CUBIC INCH CAPACITY
1

TP588
TP591

—
"F", Set 1/ 4"

11/2" DEEP EXTENSION RINGS – 10.3 CUBIC INCH CAPACITY
8 – 1/2"
TP592
—
7
1 /8" DEEP – 13.0 CUBIC INCH CAPACITY
8 – 1/2"
TP594
—
6 – 3/4"
TP596
—
"S", SET 1/2"
5 – 1/2"
TP598
17/8" DEEP EXTENSION RINGS – 13.0 CUBIC INCH CAPACITY
8 – 1/2"
TP600
—
6 – 3/4"
TP602
—
1
2 /8" DEEP – 14.5 CUBIC INCH CAPACITY
8 – 1/2"
TP604
—
6 – 3/4"
TP606
—
"S", Set 1/2"
5 – 1/2"
TP605

UTILITY BOX COVERS
UL LISTED

TP608

TP610

TP612

TP613

TP614

TP616

TP618

Cat. #

Description

Unit Qty.

Wt. Lbs. Per 100

TP608*
TP610*
TP612*
TP613*
TP614*
TP616*
TP618*

Blank
For 20 and 30 AMP, Twist Lock, 119/32" Diameter
Single Receptacle, 113/32" Diameter
For GFCI Device
1
/2" KO
Duplex Receptacle
One Toggle Switch

100
100
100
100
100
100
100

10
9
9
7
10
8
10

*CSA Certified

322

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

322-333.qxp

12/16/2013

4:21 PM

Page 323

Steel Switch Boxes

1" DEEP - NON-GANGABLE - 6.5 CUBIC INCH CAPACITY
115/16" WIDE x 33/4" LONG

CP

TP101

TP103
KNOCKOUTS

Cat. #

Bracket

Plastic Clamp

Conduit

Cable

Unit Qty.

Wt. Lbs. Per 100

TP101
TP103

"S"
"S"

No
Yes

1 – /2"
1 – 1/2"

2
2

25
25

38
39

1

11/2" DEEP - NON-GANGABLE - 7.5 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
UL LISTED

TP100

TP104

TP106

TP114

KNOCKOUTS
Cat. #
Bracket
Ears
Each End
FOR NONMETALLIC CABLE – CLAMPS IN EACH END

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP100
TP104

—
—

1 – 1/2"
1 – 1/2"

50
50

43
50

—
"S", set 1/2"

Yes
—

2 – Cable
2 – Cable

FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
TP106*

—

Yes

2 – Cable

—

1 – 1/2"

50

44

1 – 1/2"

—

1 – 1/2"

50

39

FOR CONDUIT – NO CLAMPS, FLUSH DEVICE
TP114

—

Yes

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

323

322-333.qxp

12/16/2013

4:21 PM

Page 324

Steel Switch Boxes

2" DEEP – GANGABLE – 10.0 CUBIC INCH CAPACITY
2" WIDE x 3" LONG

CP

UL LISTED

TP116

TP118

TP120

TP123

TP124

TP126

TP130

TP132

TP131
Hold-Tite

KNOCKOUTS
Cat. #
Bracket
Ears
Each End
FOR NONMETALLIC CABLE – CLAMPS IN EACH END

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP116
TP118

—
—

1 – 1/2"
1 – 1/2"

50
50

53
60

—
—
—

1 – 1/2"
1 – 1/2"
1 – 1/2"

50
50
50

54
63
61

2 – 1/2"
2 – 1/2"
2 – 1/2", 1 Side
—

1
1
1
1

/2"
/2"
1
/2"
1
/2"

50
50
50
50

47
48
58
52

—
"S", Set 5/8"

Yes
—

2 – Cable
2 – Cable

FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
TP120*
TP123*
TP124*

—
"F", Set 1/2"
"S", Set 5/8"

Yes
—
—

2 – Cable
2 – Cable
2 – Cable

FOR CONDUIT – NO CLAMPS, FLUSH DEVICE
TP126
TP130
TP132
TP131

—
—
"S", Set 5/8"
Hold-Tite

—
Yes
—
Yes

1
1
1
1

–
–
–
–

/2"
/2"
1
/2"
1
/2"–T
1
1

–
–
–
–

1
1

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

324

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

322-333.qxp

12/16/2013

4:21 PM

Page 325

Steel Switch Boxes

21/4" DEEP – GANGABLE – BEVELED CORNERS 10.5 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
UL LISTED

CP

TP134

TP137 Hold-Tite

TP138

KNOCKOUTS
Cat. #
Description
Ears
Bumps
CLAMP SCREWS THROUGH BEVELED CORNERS

Each End

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP134
TP137
TP138

2 – Cable
2 – Cable
2 – Cable

—
—
—

1 – 1/2"
1 – 1/2"
1 – 1/2"

50
50
50

51
57
55

Gangable
Gangable
Gangable

—
Yes
Yes

Yes
—
—

21/ 2" DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
UL LISTED

TP158

TP162

TP163

TP170

TP161

TP172

Cat. # Bracket
Ears Ground Pigtail Leveling Bumps
FOR NONMETALLIC CABLE - CLAMPS IN EACH END
TP158
TP115*
TP161
TP162
TP163
TP164
TP168
TP170
TP172
TP174
TP171

—
—
Snap-In
—
Hold-Tite
"F", Set 1/2"
"F", Set 1/4"
"S", Set 5/8"
"D", Set 5/8"
"D", Set 5/8"
"VP", Set 1/2"

—
Yes
Yes
Yes
Yes
—
—
—
—
—
—

—
Yes
—
—
—
—
—
—
—
Yes
—

Yes
—
—
—
—
—
—
—
—
—
—

TP164
TP168

TP174

KNOCKOUTS
Each End
2
2
2
2
2
2
2
2
2
2
2

–
–
–
–
–
–
–
–
–
–
–

Cable,
Cable
Cable
Cable
Cable
Cable,
Cable,
Cable,
Cable,
Cable,
Cable,

1 – 1/2"

1
1
1
1
1
1

–
–
–
–
–
–

/2"
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
1

TP171

Each Side

Bottom

—
1–
1–
1–
—
1–
1–
1–
1–
1–
1–

1–
1–
—
1–
1–
1–
1–
1–
1–
1–
1–

/2"
1
/2"
1
/2"
1

/2"
/2"
/2"
1
/2"
1
/2"
1
/2"
1
1
1

/2"
/2"

1
1

/2"
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
1

Unit Qty.

Wt. Lbs. Per 100

50
50
50
50
50
50
50
50
50
50
50

59
63
73
62
65
71
71
69
70
71
73

*Not UL Listed

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

325

322-333.qxp

12/16/2013

4:21 PM

Page 326

Steel Switch Boxes

21/2" DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2" WIDE x 3" LONG FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END

CP

UL LISTED

TP177

TP178

TP179
Hold-Tite

TP184

TP185

TP180

KNOCKOUTS
Cat. #

Bracket

Ears

Each End

Each Side

TP177*
TP178*
TP179*
TP180*
TP184*
TP185*

Snap-In
—
Hold-Tite
"F", Set 1/2"
"S", Set 5/8"
"VP", Set 1/2"

Yes
Yes
Yes
—
—
—

2
2
2
2
2
2

1–
1–
—
1–
1–
1–

–
–
–
–
–
–

Cable
Cable
Cable
Cable, 1 – 1/2"
Cable, 1 – 1/2"
Cable, 1 – 1/2"

/2"
1
/2"
1

/2"
/2"
1
/2"
1
1

Bottom

Unit Qty.

Wt. Lbs. Per 100

—
1–
1–
1–
1–
1–

50
50
50
50
50
50

74
63
66
72
70
74

/2"
/2"
1
/2"
1
/2"
1
/2"
1
1

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

GANG BOXES SET BACK 1/2"
21/2" DEEP – 33/4" HIGH –

/2"

1

AND

/4"

3

CONCENTRIC KOs

UL LISTED

TP632

TP633

TP637

TP638

KNOCKOUTS
Cat. #

Gang

Bracket

Width

Each End

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

TP632
TP633
TP637
TP638

3
4
3
4

VP
VP
VS
VS

5 /16"
73/8"
59/16"
73/8"

2
2
2
2

3
4
3
4

6
8
6
8

5
5
5
5

143
179
143
179

46.5
62.0
46.5
62.0

326

www.crouse-hinds.com

9

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

322-333.qxp

12/16/2013

4:21 PM

Page 327

Steel Switch Boxes

21/ 2" DEEP "EC" BOXES – GANGABLE – CUBIC INCH CAPACITY (SEE BELOW)
2" WIDE × 3" LONG
CLAMPS IN EACH END
UL LISTED
CP

TP188

TP190

TP196

Note: The cubic capacity of any of our new work 21/ 2" Deep Switch Boxes can be increased to 18 cubic inches simply by adding our "EC" Extender to the sides of the box. This provides
5.5 extra cubic inches of space necessary to conform to revisions in the National Electrical Code. "EC" boxes are stocked factory assembled in popular styles; however, the "EC" Extender
can be ordered separately for "Instant-On" assembly on the job with Eaton's Crouse-Hinds Switch Boxes.

KNOCKOUTS
Cat. #

Bracket

Each End

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

TP188

—

—

—

—

50

32

5.5

2 – Cable, 1 – 1/2"
2 – Cable, 1 – 1/2"

—
—

1 – 1/2"
1 – 1/2"

25
25

89
89

18.0
18.0

FOR NONMETALLIC CABLE
"D", Set 5/8"
TP190
"S", Set 5/8"
TP196

21/2" DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
FOR CONDUIT – NO CLAMPS
UL LISTED

TP214

TP216

TP217

TP220

TP222

TP224

TP218

KNOCKOUTS
Cat. #

Bracket

Ears

Leveling Bumps

TP214
TP216
TP217
TP218
TP220
TP222
TP224

—
Snap-In
—
—
"F", Set 1/2"
"S", Set 5/8"
Hold-Tite

—
Yes
Yes
Yes
—
—
Yes

Yes
—
—
—
—
—
—
www.crouse-hinds.com

Each End
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"
US: 1-866-764-5454

Each Side
—
1–
—
1–
1–
1–
—

/2"

1

/2"
1
/2", 1 Side
1
/2", 1 Side
1

CAN: 1-800-265-0502

Bottom
1 – 1/2"
—
1–
1–
1–
1–
1–

/2"
/2"
1
/2"
1
/2"
1
/2"
1
1

Unit Qty.

Wt. Lbs. Per 100

50
50
50
50
50
50
50

55
69
64
58
66
65
61

Copyright© 2013 Eaton’s Crouse-Hinds Business

327

322-333.qxp

12/16/2013

4:21 PM

Page 328

Steel Switch Boxes

21/2" DEEP SWITCH BOXES – "INSTANT ON" – 12.5 CUBIC INCH CAPACITY

CP

2" WIDE × 3" LONG
WITH BUMPS – CLAMPS IN EACH END (BUMPS LEVEL THE BOX AGAINST THE SIDE OF STUD, TOP TO
BOTTOM, FRONT TO BACK)

TP213
Cat. #

Clamps

Nails

KNOCKOUTS
Each End

Each Side

Bottom

Std. Unit Pkg.

Wt. Lbs. Per 100

TP213

Armored Cable

Angle

2 – Cable, 1 – 1/2"

—

1 – 1/2"

50

66

23/4" DEEP – GANGABLE – 14.0 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
UL LISTED

TP660

TP662

TP668

TP670

TP664

KNOCKOUTS
Cat. #
Bracket
Ears
Each End
FOR NONMETALLIC CABLE – CLAMPS IN EACH END

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP660
TP662
TP664

1 – 1/ 2"
1 – 1/ 2"
1 – 1/ 2"

1 – 1/ 2"
1 – 1/ 2"
1 – 1/ 2"

50
50
50

62
67
70

1 – 1/ 2"
1 – 1/ 2"

50
50

68
71

—
—
"S", Set 5/ 8"

—
Yes
—

2 – Cable
2 – Cable
2 – Cable

FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
TP668*
TP670*

—
"S", Set 5/ 8"

Yes
—

2 – Cable
2 – Cable

1 – 1/ 2"
1 – 1/ 2"

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

328

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

322-333.qxp

12/16/2013

4:21 PM

Page 329

Steel Switch Boxes

23/ 4" DEEP – GANGABLE – 14.0 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
FOR CONDUIT – NO CLAMPS
UL LISTED
CP

TP672
TP674

(TP676 – 1 screw ear)
(TP678 – 2 screw ear)

TP680
TP677

KNOCKOUTS
Cat. #

Bracket

Ears

TP672
TP674
TP676
TP678
TP680
TP677

—
—
—
—
"S", Set 5/8"
"S", Set 5/8"

—
—
Yes
Yes
—
—

Each End
1 – 1/2"
1 – 3/4"
1 – 1/2"
1 – 3/4"
1 – 1/2"
1 – 3/4"

Each Side
1 – 1/2"
1 – 3/4"
1 – 1/2"
1 – 3/4"
1 – 1/2", 1 Side
1 – 3/4", 1 Side

Bottom
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"
1 – 1/2"

Unit Qty.

Wt. Lbs. Per 100

50
50
50
50
50
50

59
59
61
61
70
70

31/2" DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
FOR NONMETALLIC CABLE – CLAMPS IN EACH END
UL LISTED

TP236

TP238

TP239

TP242

TP243

TP240

KNOCKOUTS
Cat. #

Bracket

Ground Pigtail

Ears

Each End

TP236
TP238
TP239
TP240
TP242
TP243

—
—
—
"F", Set 1/2"
"S", Set 7/8"
"S", Set 7/8"

—
—
Yes
—
—
Yes

—
Yes
Yes
—
—
—

2
2
2
2
2
2

www.crouse-hinds.com

–
–
–
–
–
–

Cable,
Cable,
Cable,
Cable,
Cable,
Cable,

US: 1-866-764-5454

1
1
1
1
1
1

–
–
–
–
–
–

/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1

Each Side
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"

2
2
2
2
2
2

CAN: 1-800-265-0502

Bottom
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"

1
1
1
1
1
1

Unit Qty.

Wt. Lbs. Per 100

25
25
25
25
25
25

78
80
81
88
87
88

Copyright© 2013 Eaton’s Crouse-Hinds Business

329

322-333.qxp

12/16/2013

4:21 PM

Page 330

Steel Switch Boxes

31/2" DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END

CP

UL LISTED

TP244

TP249

TP246

KNOCKOUTS
Cat. #

Bracket

Ground Pigtail

Ears

Each End

Each Side

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP244*
TP249*
TP246*

—
—
"S", Set 7/8"

—
Yes
—

Yes
Yes
—

2 – Cable, 1 – 1/2"
2 – Cable, 1 – 1/2"
2 – Cable, 1 – 1/2"

2 – 1/2"
2 – 1/2"
2 – 1/2"

1 – 1/2"
1 – 1/2"
1 – 1/2"

25
25
25

81
82
88

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.

31/2" DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2" WIDE x 3" LONG
FOR CONDUIT – NO CLAMPS
UL LISTED

TP248
TP250

TP252

TP254

KNOCKOUTS
Cat. #

Bracket

Ears

TP248
TP250
TP252
TP254

—
—
—
—

—
—
Yes
Yes

330

www.crouse-hinds.com

US: 1-866-764-5454

Each End
2 – 1/2"
2 – 3/4"
2 – 1/2"
2 – 3/4"

CAN: 1-800-265-0502

Each Side
– 1/2"
– 3/4"
– 1/2"
– 3/4"

2
2
2
2

Bottom
– 1/2"
– 1/2"
– 1/2"
– 1/2"

1
1
1
1

Copyright© 2013 Eaton’s Crouse-Hinds Business

Unit Qty.

Wt. Lbs. Per 100

25
25
25
25

74
74
76
76

322-333.qxp

12/16/2013

4:21 PM

Page 331

Steel Gang Boxes

GANG BOXES
15/8" DEEP x 41/2" HIGH
1
/2" & 3/4" KOs
UL LISTED
CP

TP629

TP630

TP640

KNOCKOUTS
Cat. #

Gang

Cubic
Inches

TP629
TP630
TP631
TP640
TP641

2
3
4
5
6

45
58
70
85
95

Width
613/16"
85/8"
107/16"
121/4"
141/16"

Each Side
2 – 1/2", 2 – 3/4"
3 – 1/2", 2 – 3/4"
3 – 1/2", 3 – 3/4"
4 – 1/2", 3 – 3/4"
4 – 1/2" 4 – 3/4"

Each End
1 – 1/2", 1 – 3/4"
1 – 1/2", 1 – 3/4"
1 – 1/2", 1 – 3/4"
1 – 1/2", 1 – 3/4"
1 – 1/2", 1 – 3/4"

Bottom
3 – 1/2", 2 – 3/4"
6 – 1/2", 4 – 3/4"
6 – 1/2", 4 – 3/4"
6 – 1/2", 4 – 3/4"
6 – 1/2", 4 – 3/4"

Unit Qty.

Wt. Lbs.
Per 100

5
5
5
1
1

45
58
70
85
95

GANG BOXES
21/ 2" DEEP x 41/ 2" HIGH
3
/ 4" & 1" KOs
UL LISTED

TP871

TP873
KNOCKOUTS

Cat. #

Gang

Cubic
Inches

TP870
TP871
TP872
TP873
TP874

2
3
4
5
6

71
90
110
132
150

Width
613/16"
85/8"
107/16"
121/4"
141/16"

Each Side
2 – 3/4", 1 – 1"
4 – 3/4", 1 – 1"
2 – 3/4", 2 – 1"
3 – 3/4", 2 – 1"
3 – 3/4", 3 – 1"

Each End
1 – 3/4", 1 – 1"
1 – 3/4", 1 – 1"
1 – 3/4", 1 – 1"
1 – 3/4", 1 – 1"
1 – 3/4", 1 – 1"

Bottom
3 – 1/2", 2 – 3/4"
6 – 1/2", 4 – 3/4"
6 – 1/2", 4 – 3/4"
6 – 1/2", 4 – 3/4"
6 – 1/2", 4 – 3/4"

Unit Qty.

Wt. Lbs.
Per 100

10
10
5
5
5

147
183
216
263
282

GANG BOX PARTITIONS

TP876
Cat. #
TP876
TP877

Description
For 15/8" Deep Box
For 21/2" Deep Box

TP877

Unit Qty.

Wt. Lbs.
Per 100

25
50

19
24

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

331

322-333.qxp

12/16/2013

4:22 PM

Page 332

Steel Gang Box Covers

GANG BOX COVERS
RAISED

/16"

FOR PLASTER

13

CP

UL LISTED

TP653

TP667

AMR3

Cat. #

Gang

Length

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

TP657
TP653
AMR3**
TP655
TP661
TP667

2
3
3
4
5
6

7"
813/16"
3
/4"-1-1/2" Raised Adjustable
105/8"
127/16"
141/4"

5
5
25
5
5
5

53
60
78
66
75
85

8.5
13.5
10.4
18.3
23.0
28.3

**ETL Listed

GANG BOX COVERS, FLAT, BLANK
UL LISTED

TP803

TP806

Cat. #

Gang

Length

Unit Qty.

Wt. Lbs. Per 100

TP802
TP803
TP804
TP805
TP806

2
3
4
5
6

7"
813/16"
105/8"
127/16"
141/4"

5
5
5
1
1

66
85
94
122
132

332

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

322-333.qxp

12/16/2013

4:22 PM

Page 333

Steel Masonry Boxes

MASONRY BOXES
21/2" DEEP × 33/4" HIGH
1
/2" AND 3/4" CONCENTRIC KOs
UL LISTED
CP

TP682
KNOCKOUTS
Cat. #

Gang

TP682
TP683
TP684
TP685
TP686
TP687

1
2
3
4
5
6

Width
115/16"
33/4"
59/16"
73/8"
93/16"
11"

Each Side

Each End

Bottom

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

2
2
2
2
2
2

1
2
3
4
5
6

2
4
6
8
10
12

20
10
5
5
5
1

70
103
129
165
189
230

15.5
31.0
46.5
62.0
77.5
93.0

MASONRY BOXES
31/2" DEEP × 33/4" HIGH
1
/2" AND 3/4" CONCENTRIC KOs
UL LISTED

TP690

TP691

KNOCKOUTS
Cat. #

Gang

TP690
TP691
TP692
TP693
TP694
TP695

1
2
3
4
5
6

Width
115/16"
33/4"
59/16"
73/8"
93/16"
11"

Each Side

Each End

Bottom

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

2
2
2
2
2
2

2
4
6
8
10
12

2
4
6
8
10
12

20
10
10
5
5
1

84
120
155
207
235
287

22.0
44.0
66.5
88.0
110.0
132.0

MASONRY BOX PARTITIONS
Cat. #

Description

Unit Qty.

Wt. Lbs.
Per 100

TP820
TP821

Nonmetallic Partition for 21/2" Deep Masonry Boxes
Nonmetallic Partition for 31/2" Deep Masonry Boxes

25
25

3
4

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

333

334-345.qxp

12/16/2013

4:22 PM

Page 334

Steel Masonry Boxes

GANGABLE MASONRY BOXES
UL LISTED

CP

Features:
• The gangable feature allows the option of creating a multiple gang box from a single gang box by simply removing the combo head screw
holding the side with a #2 bit and connecting the two (or more) boxes together re-using the screws
• Non-metallic partitions (ordered separately) install quickly and easily without tools in multi-gang boxes and are used to separate power and
control circuits within the same box, as required by the National Electrical Code®

KNOCKOUTS
Cat. #
Width
Each Side
Each End
21/2" DEEP × 33/4" HIGH, 1/2" AND 3/4" CONCENTRIC KOs
115/16"
TP671
2
2
31/2" DEEP × 33/4" HIGH, 1/2" AND 3/4" CONCENTRIC KOs
115/16"
TP675
4
2

Bottom

Unit Qty.

Wt. Lbs. Per 100

Capacity Cu. In.

2

20

63

15.5

2

20

82

22.0

GANGABLE MASONRY BOX PARTITIONS
Cat. #

Description

Unit Qty.

Wt. Lbs.
Per 100

TP654
TP656

Nonmetallic Partition for 21/2" Deep Gangable Masonry Boxes
Nonmetallic Partition for 31/2" Deep Gangable Masonry Boxes

25
25

4
6

334

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

334-345.qxp

12/16/2013

4:22 PM

Page 335

Steel Octagon Boxes & Ceiling Pans

31/ 4" ROUND CEILING PAN† – 4.0 CUBIC INCH CAPACITY
/2" DEEP
CLAMPS IN BOTTOM
FIXTURE RATED

1

UL LISTED
CP

TP266
KNOCKOUTS
Cat. #

Cable

Conduit

Unit Qty.

Wt. Lbs. Per 100

TP266

4 – Cable

1 – 1/2"

50

30

31/ 4" OCTAGON OUTLET BOXES† – 9.0 CUBIC INCH CAPACITY
11/2" DEEP
FIXTURE RATED
UL LISTED

TP256

TP258

TP259

TP260

TP264

KNOCKOUTS
Cat. #
Description
FOR CONDUIT – NO CLAMPS

Sides

Bottom

Unit Qty.

Wt. Lbs. Per 100

TP256
TP258

4 – 1/2"
4 – 1/2"

1 – 1/2"
—

50
50

41
31

1 – 1/2"
1 – 1/2"
1 – 1/2"

50
50
50

53
44
47

—
Extension Ring

FOR NONMETALLIC CABLE WITH CLAMPS
"S" Bracket, Set 1/2"
4 – Cable, 1 – 1/2"
TP259
4 – Cable, 2 – 1/2"
TP260
—
4 – Cable, 2 – 1/2"
TP264
Two Screw Ears

†Weight limit for 31/4" and 4" octagon outlet boxes and ceiling pans is 50 lbs. for fixture/luminaire. Not suitable for fans.

31/ 4" ROUND CEILING COVERS
UL LISTED

TP270

TP272

Cat. #

KNOCKOUTS
Cable

Unit Qty.

Wt. Lbs. Per 100

TP270
TP272

Flat Blank
Flat, 1/ 2" KO in Center

100
100

18
18

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

335

334-345.qxp

12/16/2013

4:22 PM

Page 336

Steel Octagon Boxes & Ceiling Pans

4" ROUND CEILING PANS* – 6.0 CUBIC INCH CAPACITY
/2" DEEP
FIXTURE RATED
UL LISTED

CP

1

TP269

TP267

KNOCKOUTS

Cat. #

Description

Sides

TP269
TP267

KOs Only
KOs and Clamps

—
—

Bottom
5 – 1/2"
4 – Cable, 3 – 1/2"

Unit Qty.

Wt. Lbs. Per 100

50
50

35
39

*Weight limit for 31/4" and 4" octagon outlet boxes and ceiling pans is 50lbs for fixture.
Not suitable for fans.

4" OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2" DEEP
FOR CONDUIT – NO CLAMPS
FIXTURE RATED
UL LISTED

TP274, TP278,
TP834*

TP276

TP273

TP280

TP282

TP284, TP286

KNOCKOUTS

Cat. #

Description

TP274
TP273
TP276
TP278
TP280
TP282

—
Blank Bottom
—
—
"C" Bracket
"S" Bracket, Set 1/2"

Sides
4 – 1/2"
4 – 1/2"
4 – 3/4"
2 – 1/ 2", 2 – 3/4"
4 – 1/2"
3 – 1/2"

Bottom
5 – 1/2"
—
3–
3–
5–
5–

/2", 2 – 3/4"
/2", 2 – 3/4"
1
/2"
1
/2"
1
1

Unit Qty.

Wt. Lbs. Per 100

50
50
50
50
50
50

50
51
50
50
60
58

Air Plenum
4 – 1/2"
5 – 1/2"
For Air Plenum
50
52
OCTAGON EXTENSION RINGS – (SLOT & KEY PERMIT MOUNTING WITHOUT REMOVING BOX SCREWS)
4 – 1/2"
TP284‡
—
—
50
36
2 – 1/2", 2 – 3/4"
TP286‡
—
—
50
36
TP834*

*For Air Plenum (No Mounting Holes) - Not UL Listed.
†Weight limit for 31/ 4" and 4" octagon outlet boxes and ceiling pans is 50 lbs for fixture/luminaire. Not suitable for fans.
‡CSA Certified.

336

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

334-345.qxp

12/16/2013

4:22 PM

Page 337

Steel Octagon Boxes & Ceiling Pans

4" OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2" DEEP
FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
FIXTURE RATED
UL LISTED
CP

TP310

Cat. #

Description

TP310*
TP312*
TP314*

—
"C" Bracket
"S" Bracket, Set 1/2"

TP312
KNOCKOUTS
Sides
4 – Cable, 2 – 1/2"
4 – Cable, 2 – 1/2"
4 – Cable, 1 – 1/2"

TP314

Bottom
1 – 1/2"
1 – 1/2"
1 – 1/2"

Unit Qty.

Wt. Lbs. Per 100

50
50
50

57
66
64

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.
† Weight limit for 31/ 4" and 4" octagon outlet boxes and ceiling pans is 50lbs for fixture/luminaire. Not suitable for fans

4" OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2" DEEP
FOR NONMETALLIC CABLE – WITH CLAMPS
FIXTURE RATED
UL LISTED

TP298

TP300

TP302
KNOCKOUTS

Cat. #

Description

Sides

TP298
TP300
TP302
TP304
TP306
TP308

—
With Side Nail Holes
"C" Bracket
"S" Bracket, Set 1/2"
Two Screw Ears
"F" Bracket, Set 1/2"

4
4
4
4
4
4

–
–
–
–
–
–

Cable,
Cable,
Cable,
Cable,
Cable,
Cable,

2
2
2
1
2
1

–
–
–
–
–
–

/2"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
1

TP304
Bottom
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"
– 1/2"

1
1
1
1
1
1

TP306

TP308

Unit Qty.

Wt. Lbs. Per 100

50
50
50
50
50
50

56
55
65
64
58
64

† Weight limit for 31/4" and 4" octagon outlet boxes and ceiling pans is 50lbs for fixture/luminaire. Not suitable for fans

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

337

334-345.qxp

12/16/2013

4:23 PM

Page 338

Steel Octagon Boxes & Ceiling Pans

4" OCTAGON OUTLET BOXES† – 21.5 CUBIC INCH CAPACITY
21/8" DEEP
FOR CONDUIT – NO CLAMPS
FIXTURE RATED
CP

UL LISTED

TP288, TP290, TP294

TP292, TP838*

TP339

TP292RED

KNOCKOUTS
Cat. #

Description

TP288
TP288PF‡
TP290
TP290PF‡
TP292
TP292PF‡
TP292RED
TP294
TP339

—
—
—
—
—
—
—
—
Blank Bottom

4
4
4
4
2
2
2
4
4

Sides
– 1/2"
– 1/2"
– 3/4"
– 3/4"
– 1/2", 2 – 3/4"
– 1/2", 2 – 3/4"
– 1/2", 2 – 3/4"

Plenum

2 – 1/2", 2 – 3/4"

Bottom
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"
1
/2", 2 – 3/4"

– 1"
– 1/2"

Unit Qty.

Wt. Lbs. Per 100

3–
3–
3–
3–
3–
3–
3–
3–
—

25
25
25
25
25
25
25
25
25

64
64
64
64
64
64
64
64
65

3 – 1/2", 2 – 3/4"

25

62

Air Plenum
TP838*

*For Air Plenum (No Mounting Holes) - Not UL Listed
‡TP catalog numbers ending in PF includes ground screw with pigtail lead
† Weight limit for 31/ 4" and 4" octagon outlet boxes and ceiling pans is 50lbs for fixture/luminaire. Not suitable for fans

4" OCTAGON OUTLET BOXES† – 21.5 CUBIC INCH CAPACITY
21/8" DEEP – WITH CABLE CLAMPS
FIXTURE RATED
UL LISTED

TP316

TP318

TP320

TP317

TP338

KNOCKOUTS
Cat. #

Description

Sides

Bottom

Unit Qty.

Wt. Lbs. Per 100

4 – Cable, 2 – 1/2"
4 – Cable, 2 – 1/2"
4 – Cable, 1 – 1/2"

1 – 1/2"
1 – 1/2"
1 – 1/2"

25
25
25

68
88
81

1 – 1/2"
1 – 1/2"
1 – 1/2"

25
25
25

69
82
82

FOR NONMETALLIC CABLE
TP316
TP318
TP320

—
"C" Bracket
"S" Bracket, Set 1/2"

FOR ARMORED & METAL CLAD (MCI) – CABLE-CLAMPS IN EACH END
TP317*
—
4 – Cable, 2 – 1/2"
4 – Cable, 1 – 1/2"
"S" Bracket, Set 1/2"
TP338*
"S" Bracket, Set 1/2"
4 – Cable, 1 – 1/2"
TP338PF‡

*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company.
‡TP catalog numbers ending in PF includes ground screw with pigtail lead
† Weight limit for 31/4" and 4" octagon outlet boxes and ceiling pans is 50lbs for fixture/luminaire. Not suitable for fans

338

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

334-345.qxp

12/16/2013

4:23 PM

Page 339

Steel Octagon Covers & Accessories

4" OCTAGON BOX AND ADJUSTABLE BAR SETS – 15.5 CUBIC INCH CAPACITY
11/2" DEEP BOX SETS
FIXTURE RATED
UL LISTED
Weight Limits: 35 lbs. at 16", 15 lbs. at 24"

CP

TP372

TP377

TP367

Cat. #
FOR CONDUIT – NO CLAMPS

Stud Spacing

Stud

Unit Qty.

Wt. Lbs. Per 100

TP372*

16" – 24"

Yes

25

85

—

25

102

25
25

100
100

FOR NONMETALLIC CABLE – WITH CLAMPS
TP377

16" – 24"

FOR ARMORED & METAL CLAD (MCI) CABLE – CLAMPS IN EACH END
TP367
TP367PF†

16" – 24"
16" – 24"

—
—

*4" Octagon Box and Adjustable Bar Sets have 1/2" KOs for conduit
†TP catalog numbers ending in PF includes ground screw with pigtail lead

ADJUSTABLE BAR HANGERS
UL LISTED

Features:
•
•
•
•

Holding prong holds box in place for nailing
Design resists bending and twisting
Locking tabs to hold bar in position
Weight Limits: 50 lbs. at 16"; 21 lbs. at 24"

TP356
Cat. #

Stud Spacing

Length

Stud

Unit Qty.

Wt. Lbs. Per 100

TP356

16" & 24"

14" – 221/2"

—

50

41

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

339

334-345.qxp

12/16/2013

4:23 PM

Page 340

Steel Octagon Covers & Accessories

4" OCTAGON BOX COVERS – CUBIC CAPACITY (SEE BELOW)

CP

UL LISTED

TP322
TP853*

TP323

TP326, TP331,
TP332, TP333

TP328

TP329

TP335

TP334

TP336

TP330

Cat. #

Description

Capacity Cu. In.

Unit Qty.

Wt. Lbs. Per 100

TP322†
TP322RED†
TP323†
TP333
TP332
TP326
TP331
TP328†
TP330
TP329†
TP335
TP334‡
TP336

Flat Blank – Octagon Shape
Flat Blank – Octagon Shape
Flat Blank – Round Shape
Raised 1", Open With Ears 23/ 4"
Raised 1/ 2", Open With Ears 23/ 4"
Raised 5/ 8", Open With Ears 23/ 4"
Raised 3/ 4", Open With Ears 23/ 4"
Flat With 1/ 2" KO – Octagon Shape
Raised 5/ 8", With 1/ 2" KO
Flat With 1/ 2" KO – Round Shape
Flat, For Toggle Switch
Flat, Single Receptacle 113/ 32"
Flat, For Duplex Receptacle

—
—
—
7.0
3.3
3.8
5.0
—
3.8
—
—
—
—

50
50
50
25
50
50
50
50
50
50
50
50
50

22
22
24
30
22
20
26
22
31
24
23
21
18

Flat, Blank With PVC Gasket

—

50

24

Air Plenum
TP853*‡

*For Air Plenum (No Mounting Holes)
†CSA Certified
‡ Not UL Listed

FLEXIBLE FIXTURE HANGERS

Standard Materials and Finishes:

Eaton's Crouse-Hinds TPRFH flexible fixture hangers are used in
commercial or light industrial applications where HID high bay and
low bay lighting fixtures are used. Specific applications include
storage facilities, shipping warehouses, retail and DIY facilities.

• Material: Sheet Steel
• Finish: Zinc Chromate for corrosion resistance

Features and Benefits:
• Suitable for use with 1/2" or 3/4" fixture conduit stems these hangers
allow the conduit stem of the fixture (luminaire) to swing in any
direction. Maximum swing angle is 26° from vertical max slope
angles 221/2°
• Available for attachment to round or octagonal steel boxes.
• Quickly and easily attached by two screws.
• Hangers are drilled and tapped for use with 3/4" conduit stem as
standard and come supplied with a 3/4" – 1/2" reducer for 1/2" conduit
stem applications.

Description

Support Wt. (lbs) Cat. #

For use with 4" Round or
Octagon Boxes

50

Certifications and Compliances:
• UL Listed – UL 1598
• CSA C22.2 No. 250
• Suitable for Damp Locations

340

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

TPRFH12

334-345.qxp

12/16/2013

4:23 PM

Page 341

Steel Specialty Boxes

4" OCTAGON CONCRETE BOXES AND HUNG CEILING BOXES*
UL LISTED

CP

TP620, TP622, TP628

TP635, TP636, TP644

TP623, TP624
(bars not included)

Cat. #
TP620
TP622
TP628
TP634
TP635
TP636
TP639
TP642
TP644

HUNG
TP623
TP624

Depth

KNOCKOUTS
Unit Qty.
1
2"
25
/2" & 3/4" Single Row
1
/2" & 3/4" Single Row
21/2"
25
1
/2" & 3/4" Single Row
3"
20
3
1" & /4" Single Row
20
3"
1
31/2"
/2" Double Row
20
1
/2" & 3/4" Double Row
31/2"
20
31/2"
1" & 3/4" Double Row
20
1" & 3/4" Double Row
20
4"
1
/2" & 3/4" Double Row
4"
20
CEILING BOXES (WITH TP650 COVER, BARS NOT INCLUDED)
1
20
31/2"
/2" Double Row
1
20
/2" & 3/4" Double Row
31/2"

Wt. Lbs.
Per 100

Capacity
Cu. In.

60
72
85
77
93
93
89
106
113

23.0
29.0
35.0
30.3
43.0
43.0
41.0
47.0
47.0

93
93

43.0
43.0

*Weight limit for 4" octagon concrete boxes is 50lbs. Not suitable for fans.
†Not UL Listed

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

341

334-345.qxp

12/16/2013

4:23 PM

Page 342

Steel Specialty Boxes

4" FAN RATED OCTAGON CONCRETE BOX

CP

UL LISTED

TP643

Applications:

Features:

• Octagon concrete boxes are used in poured deck applications.
• Typical construction includes high-rises, apartments,
condominiums and restaurants with outdoor dining areas.
• They are installed on wooden or steel forms and concrete poured
around.
• Upon removal of the forms the box is flush with the concrete.
• It is common, and continuing to become even more so, to have
ceiling fans mounted to these boxes. Because of the additional
mounting support boss this new box is suitable for use with fans of
up to 70 pounds and fixtures up to 90 pounds.

1. The TP643 fan rated concrete box is made from two piece welded
construction and is supplied with two rows of ½ & ¾” dedicated
KO’s.
2. The box is also supplied with two external mounting ears which
are used to secure the box to the forms.
3. The fan (or fixture) is held securely in place by the two 10-32 x 1
½” long pan head screws and lock washers. The screws attach
to the specially designed boss.
4. There are two 8-32 x ½” screws provided for attachment of a box
plate/cover (TP648, TP649, or TP650 – ordered separately).
5. Mounting support boss & locknuts allows the TP643 box to be
used with fans of up to 70 pounds and fixtures up to 90 pounds.

Cat. #

Depth

KNOCKOUTS

Unit Qty.

Wt. Lbs.
Per 100

Capacity
Cu. In.

TP643

4"

1

/2" & 3/4"

20

102

46.0

CONCRETE BOX PLATES
UL LISTED

TP648

TP649

TP650

TP652

Cat. #

Description

Unit Qty.

Wt. Lbs. Per 100

TP648
TP649
TP650
TP652

No Stud 3 – 1/2" & 2 – 3/4" KOs
Flat, Blank
3
/8" Stud 2 – 1/2" & 2 – 3/4" KOs
Single Receptacle

50
50
50
50

28
28
33
24

342

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

334-345.qxp

12/16/2013

4:23 PM

Page 343

Ceiling Fan Box And Supports

CEILING FAN BOXES AND SUPPORTS–
CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
Weight Limits: TP261 – 35 lbs. max. for fans, 50 lbs. max. for fixture. TP301 – Fan is supported independent of outlet box, mounting screws go through
box and into joist. Box will support fans up to 70 lbs. and fixtures up to 90 lbs. TP275 – 70 lbs, max. for fans, 90 lbs. max for fixtures.

CP

TP275

TP261

TP315

TP379

Cat. # Description

TP301

KNOCKOUTS
Sides
Bottom

Unit Qty.

Wt. Lbs. Per 100

WEIGHT LIMITS
Fans
Fixtures

1 – 1/ 2"

20

66.6

70 lbs.

90 lbs.

2 – 1/ 2"

2 – 1/ 2"

12

192

35 lbs.

50 lbs.

15.5

4 – 1/ 2"

2 – 1/ 2"

12

207

35 lbs.

50 lbs.

8.0

—

2 – 1/ 2"

20

50

35 lbs.

50 lbs.

6.8

—

3 – 1/ 2"

20

51

70 lbs.* 90 lbs.*

Stud Spacing

Cubic In. Capacity

—

15.5

4 – Cable,
2 – 1/ 2"

11/ 2" Deep Octagon,
TP315† Fan Box with New
Work Bar Hanger

16" – 24"

15.5

11/ 2" Deep with Fan
Brace Old Work Bar
Hanger

16" – 24"

/ 8" Deep with
External Clamp and
Mounting Screws
(polybagged)

—

TP275

TP379

11/ 2" Deep, Clamps
and Mounting
Screws (polybagged)

5

TP261

/ 2" Deep, 4" Round,
with NM Snap-In
TP301* Connector, Mtg.
Screws, Protective
Cover (no bag)
1

*TP301 fan is supported independent of outlet box.
†TP315 comes with Romex clamp installed on one side. The other 3 sides have a 1/ 2" KO, a bagged MC clamp and screw and a bagged plastic NM connector.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

343

334-345.qxp

12/16/2013

4:23 PM

Page 344

Ceiling Fan Box And Supports

CEILING FAN BOXES – PVC
UL LISTED

CP

Weight Limits: Fans and fixtures are supported independent of outlet box. Mounting screws go through box and into joist.
Box will support up to 70 lbs. for fans and 90 lbs. for fixtures. Provided with Romex connector

TP1300

TP1300
Cat. #

Description

Capacity Cu. In.

Knockouts

Integral Clamp

Unit Qty.

Wt. Lbs. Per 100

TP1300

41/16" diam., 1/2" deep pan section, 4" deep
overall – with mtg. hardware & external
clamp, protective cover

14.0

3 – 1/2"

1

24

34

NONMETALLIC CEILING FAN BOXES
23/16" DEEP
UL LISTED
With clamps for nonmetallic cable.
All mounting hardware supplied, suitable for support of
fans weighing up to 35 lbs.

Features:

TP16511

• Made of heavy-duty, engineered thermoplastic material
• Offers the labor-saving feature of quick entry
and integral clamping
• Eliminates the need to use a screwdriver to break open pry-outs
• The easy access entry-point serves as a wire clamp, eliminating
time required to mechanically secure the wire to the box
Cat. #

Diameter

Mounting Method

Capacity Cu. In.

No. of Clamp Openings

Unit Qty.

Wt. Lbs. Per 100

TP16511

4"

Nails only

22.5

6

25

21

344

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

334-345.qxp

12/16/2013

4:23 PM

Page 345

Steel Box Accessories

GROUNDING DEVICES
GROUNDING SCREW AND PIGTAIL

TP711

TP701

TP704

Description

Std. Pkg.

Unit Qty.

Wt. Lbs. Per 100

TP701
TP711
TP704

Grounding Screw with 8" Insulated No. 12 Stranded Wire
Grounding Screw with 8" Insulated No. 12 Copper Wire
#10-32 x 3/8" Grounding Screw

1000
1000
1000

1000
1000
1000

2
2
.5

CP

Cat. #

GROUNDING CLIP

TP706
Cat. #

Description

Std. Pkg.

Unit Qty.

Wt. Lbs. Per 100

TP706

For Grounding Switch & Outlet Boxes Using Nonmetallic Sheathed
Cables No. 14 & No. 12, with Grounding Wire

1000

100

.5

OLD WORK CLIP

TP651
Cat. #

Description

Std. Pkg.

Unit Qty.

Wt. Lbs. Per 100

TP651

Clips lock old-work steel switch boxes tightly to wall. Two required per box.

250 sets

25 sets

4

REPLACEMENT PARTS

TP900

TP901

TP902

Cat. #

Description

Unit Qty.

Wt. Lbs. Per 100

TP900
TP901
TP902

MC-BX Clamp with Screws
One Screw Mounting Ear with Screws
Two Screw Mounting Ear with Screws

200
200
200

17.3
3.2
2.7

LOW PROFILE MOUNTING SCREWS

TP710
Cat. #
Description
Capacity Cu. In.
LOW PROFILE SCREWS - REDUCES RISK OF SHEETROCK BULGE

Unit Qty.

Wt. Lbs. Per 100

TP710

1000

.5

L.P. Screws

—

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

345

346-353.qxp

12/16/2013

4:24 PM

Page 346

Steel Box Accessories

CP

HOLD-IT SWITCH BOX SUPPORTS

FIG. 1
Cat. #
TP708

FIG. 2

FIG. 3

Description
Two metal holders for mounting old-work switch boxes in all types of wall materials

Unit Qty.

Wt. Lbs. Per 100

500 Sets

5

SWITCH BOX EXTENSION

TP709
Cat. #

Description
Fits snugly inside all 3" x 2" width boxes. Maximum adjustable depth 7.8".
TP709*
Furnished with mounting screws.

Unit Qty.

Capacity Cu. In.

Wt. Lbs. Per 100

50

3.5

13

*Not UL Listed

STEEL STUD SAFETY PLATE
•
•
•
•

Meets requirement of National Electric Code
Same size as face of stud
No nails required
Protects electrical cable and copper water pipes

Cat. #

Description
2" x 31/8" Steel Plate

TP659

Unit Qty.

Wt. Lbs. Per 100

100

11

"BACK TO BACK" BOX CONNECTOR – ZINC DIE CAST

Applications:
For use as a short raceway between two boxes
Width 1.00", Length 1.12"
Cat. #

Size

Unit Qty.

Wt. Lbs.
Per 100

5050

1

/2"

25

8

346

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

346-353.qxp

12/16/2013

4:24 PM

Page 347

PVC Switch Boxes

Applications:
Eaton's Crouse-Hinds non-metallic switch and outlet boxes are
used:
• In branch circuit wiring as a splice point
• To mount wiring devices such as switches and receptacles
• To provide mechanical protection for wiring systems and
electrical devices

CP

Features:
• Available for use with wood or metal studs to meet any
construction preference.
• Quick entry feature on all non-metallic boxes offers labor savings –
no need to break out knockouts – simply push the non-metallic
cable into the box. No tools are required. No need to remove
knockouts.
• Unique configuration of this quick entry feature on single gang
boxes provides a self-feeding feature that eliminates the need to
reach inside the box to pull the wire out.
• Integral labor saving clamping feature on two, three and four gang
boxes. The multiple gang box unique entry also serves as a clamp,
eliminating the need to mechanically secure the cable inside the
box. There are no separate clamps or screws to install or tighten.
Each entry into the multiple gang boxes has the quick entry
feature allowing the installer to simply push the cable into the box
without the need for tools or removal of knockouts, so the cable
can be inserted where it is required.

Certifications and Compliances:
• UL Listed File No. E102328
• Classified for use in fire rated (2 HR) wall or ceiling.
Fire Rating No. R9933.

Standard Materials:
• PVC-Polyvinyl Chloride Compound

SWITCH BOXES – ANGLED NAILS
UL LISTED

TP1600

TP1800

TP2000

TP2300

Cat. #

Bracket
or Nails

Capacity
Cu. In.

H

W

D

Unit Qty.

Wt. Lbs.
Per 100

TP1600
TP1800
TP2000
TP2300

Nails
Nails
Nails
Nails

16.0
18.0
20.3
22.5

33/ 4"
33/ 4"
33/ 4"
33/ 4"

21/ 4"
21/ 4"
21/ 4"
21/ 4"

21/ 2"
23/ 4"
33/ 16"
37/ 16"

100
100
100
50

21
23
25
27

SWITCH BOXES – INTEGRAL CLAMPS
UL LISTED

TP1690
(Old Work)

TP2020
(For Wood or Metal Studs)

TP2030
(For Wood or Metal Studs)

Cat. #

Bracket
or Nails

Capacity
Cu. In.

H

W

D

Unit Qty.

Wt. Lbs.
Per 100

TP1690
TP2020
TP2030

Swing Clips & Integral Clamps
Side Bracket (5/ 8" offset)
Face Bracket (1/ 2" offset)

16.0
20.3
20.3

35/ 8"
311/ 16"
311/ 16"

25/ 16"
21/ 4"
21/ 4"

23/ 4"
33/ 16"
33/ 16"

50
50
50

20
24
24

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

347

346-353.qxp

12/16/2013

4:24 PM

Page 348

PVC Switch Boxes

3" DEEP SWITCH BOXES – TWO GANG

CP

UL LISTED

TP3600

TP3490
(Old Work)

TP3630

TP3635

Cat. #

Bracket
or Nails

Capacity
Cu. In.

H

W

D

Unit Qty.

Wt. Lbs.
Per 100

TP3490
TP3600
TP3630*
TP3635*

Swing Clips
Nails
Brackets
Brackets & Nails

34.0
36.0
36.0
36.0

39/ 16"
33/ 4"
33/ 4"
33/ 4"

4"
4"
4"
4"

33/ 16"
3"
3"
3"

25
25
25
25

29
37
37
39

*Face Bracket on PVC Boxes are offset 1/ 2" unless stated otherwise

211/16" DEEP SWITCH BOXES – THREE GANG
UL LISTED

TP4600

TP4630

TP4635

Cat. #

Bracket
or Nails

Capacity
Cu. In.

Unit Qty.

Wt. Lbs.
Per 100

TP4600
TP4630*
TP4635*

Nails
Brackets
Brackets & Nails

46.0
46.0
46.0

20
20
20

45
43
46

211/16" DEEP SWITCH BOXES – FOUR GANG
UL LISTED

TP6100

TP6135

TP6180

Cat. #

Bracket
or Nails

Capacity
Cu. In.

Unit Qty.

Wt. Lbs.
Per 100

TP6100†
TP6135*†
TP6180*†

Nails
Nails & Brackets
Nails, Brackets & Bar Support

61.0
61.0
61.0

4
4
4

65
66
87

*Face Bracket on PVC Boxes are offset 1/ 2" unless otherwise stated
†Not 2-Hour Fire Rated

348

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

346-353.qxp

12/16/2013

4:24 PM

Page 349

PVC Switch Boxes

LOW VOLTAGE PARTITION – TWO, THREE OR FOUR GANG PVC

CP

TP1000

Cat. #

Bracket
or Nails

Capacity
Cu. In.

Unit Qty.

Wt. Lbs.
Per 100

TP1000

—

—

20

3

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

349

346-353.qxp

12/16/2013

4:24 PM

Page 350

PVC Switch Boxes

4" SQUARE WITH INTEGRAL CLAMPS – 20.3 CUBIC INCH CAPACITY
15/8" DEEP

CP

UL LISTED

TP1900
Cat. #

Bracket

Capacity
Cu. In.

Unit Qty.

Wt. Lbs.
Per 100

TP1900

—

20.3

50

26

4" SQUARE PVC DEVICE COVERS
UL LISTED

TP1023

TP1013

Cat. #

Raised

Capacity
Cu. In.

Unit Qty.

Wt. Lbs.
Per 100

TP1013
TP1023

1

/ 2"
/ 2"

3.8
5.8

50
50

8
8

350

1

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

346-353.qxp

12/16/2013

4:24 PM

Page 351

Ceiling Boxes

31/ 2" NONMETALLIC CEILING BOXES - PVC
27/ 8" DEEP
UL LISTED
Weight limit is 50 lbs for fixture except where indicated.
Fan support or fixture support

CP

TP16200,
(TP16201 – 21/8" Deep)
Old Work

TP16310
TP16311

TP16307
TP16308

TP16317
TP16318

Cat. #

Clamps

Ground
Plate

Bracket/Bar Hgr.

Capacity
Cu. In.

No. of Clamp
Openings

Std. Unit
Pkg.

Wt. Lbs.
Per 100

TP16200†
TP16201†
TP16310*
TP16311*
TP16307*
TP16308*

Yes
Yes
Yes
Yes
Yes
Yes

—
Yes
—
Yes
—
Yes

Snap
Snap
Nails
Nails
14"–22-1/2"
14"–22-1/2"

16.0
16.0
19.3
19.3
19.3
19.3

4
4
4
4
4
4

50
50
50
50
25
25

27
29
18
20
57
59

*Nail Bracket is set 19/16" back from the face of the box.
† Weight limit 15lbs for ceiling mounted fixtures and 6lbs for wall mounted fixtures.

LAMPHOLDER

TP16099

Standard Materials:
• Plastic molded of heat and impact resistant material that prevents
discoloring and reduces breakage
Cat. #
TP16099

Description
Lampholder, Keyless, feed thru

www.crouse-hinds.com

US: 1-866-764-5454

Std. Unit Pkg.

Wt. Lbs. Per 100

50

23

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

351

346-353.qxp

12/16/2013

4:24 PM

Page 352

Ceiling Boxes

4" NONMETALLIC CEILING BOXES - PVC
UL LISTED

CP

Weight limit is 50 lbs for fixture except where indicated

TP16111, TP16110

TP16002

TP16022, TP16023

Cat. #
11/ 2" DEEP

Clamps

Ground
Plate

Bracket/Bar Hgr.

Capacity
Cu. In.

No. of Cable
Pry-outs

Std. Unit
Pkg.

Wt. Lbs.
Per 100

TP16002
TP16022
TP16023

Yes
Yes
Yes

—
—
Yes

—
14"–16"
14"–16"

14.8
14.8
14.8

4
4
4

50
25
25

12
56
58

Yes
Yes
Yes
Yes

—
Yes
—
Yes

Nails
Nails
14"–16"
14"–16"

20.3
22.5
20.8
20.8

4
4
4
4

50
50
20
20

19
21
59
61

21/ 4" DEEP
TP16111
TP16110
TP16122
TP16123

NONMETALLIC CEILING FAN BOXES
23/16" DEEP
UL LISTED
With clamps for nonmetallic cable.
All mounting hardware supplied, suitable for support of fans weighing
up to 35 lbs.
Made of heavy-duty, engineered thermoplastic material

TP16511

Offers the labor-saving feature of quick entry and integral clamping
Eliminates the need to use a screwdriver to break open pry-outs
The easy access entry-point serves as a wire clamp, eliminating time
required to mechanically secure the wire to the box

Cat. #

Diameter

Mounting Method

Capacity Cu. In.

No. of Clamp Openings

Unit Qty.

Wt. Lbs. Per 100

TP16511

4"

Nails only

22.5

6

25

21

352

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

346-353.qxp

12/16/2013

4:24 PM

Page 353

Ceiling Boxes

CEILING FAN BOXES – PVC
UL LISTED
Weight Limits: Fans and fixtures are supported independent of outlet
box. Mounting screws go through box and into joist. Box will support
up to 70 lbs. for fans and 90 lbs. for fixtures. Provided with Romex
connector

CP

TP1300
Cat. #

Description
41/16" diam., 1/2" deep pan section, 4" deep
TP1300 overall – with mtg. hardware & external
clamp, protective cover

TP1300

Capacity Cu. In.

Knockouts

Integral Clamp

Std. Unit Pkg.

Wt. Lbs. Per 100

14.0

3 – 1/2"

1

24

34

ROUND BLANK COVER – PVC
43/4" DIA.
(FOR 31/2" AND 4" ROUND CEILING BOXES)

TP1040, TP1045

Cat. #

Color

Screws

Std. Unit
Pkg.

Wt. Lbs.
Per 100

TP1040
TP1045*

Gray
White

—
White

100
100

10
12

*TP1045 includes two white-headed wood and two #8-32" machine screws.

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

353



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2014:02:05 09:15:34-05:00
Create Date                     : 2014:01:30 09:24:31-05:00
Metadata Date                   : 2014:02:05 09:15:34-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Creator                         : mabe
Document ID                     : uuid:39e96924-f053-422e-a4cf-d89093291c27
Instance ID                     : uuid:b0b5fa17-c593-4bd5-8939-021f66b254f2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 50
Author                          : mabe
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Title                           : 
Trapped                         : False

EXIF Metadata provided by EXIF.tools