Product Detail Manual
85675-Attachment 85675-Attachment 85675-Attachment 004157 Batch5 unilog cesco-content
2014-11-11
: Pdf 49651-Attachment 49651-Attachment 004157 Batch12 unilog
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
Vandal WDR Rollerball Cameras EV-2726-N3GQ EV-2726-N3WQ EV-2726-NFGQ EV-2726-NFWQ EV-2706-N3GQ EV-2706-N3WQ EV-122C-DVB3Q EV-122C-DVH3Q 3.6mm, 24 IR, Gray 3.6mm, 24 IR, White 2.8~12mm, 36 IR, Gray 2.8~12mm, 36 IR, White eatherproo Indoor IR Dome Cameras atherpro o We 1/3” Sony Super HAD II CCD. for IP65 se outdoor u 24 IR LEDs for nighttime use. 360° Triple-axis rotation. Heavy-duty, vandal-resistant design. Cables concealed in bracket to prevent tampering. Split-glass design to eliminate IR reflection. Rugged, weatherproof (IP65) construction. Ceiling, wall-mount, and conduit brackets available. EV-2706-N3GQ and EV-2706-N3WQ only: 960H Resolution. 3X Vandal Dome Cameras (600TVL) Series EV-2866-NKGQ 2.8~12mm We EV-2876-UKGQ 3.6mm, 470TVL EV-2636-NKGQ 3X 2.8~12mm Similar to EV-2866-NKGQ, but with 690 TV lines, WDR (Wide Dynamic Range), and 1/3” Pixim® Seawolf sensor. Mid-Size Vandal IR Dome Camera 4~9mm, 21 IR, 700TVL f 960H Resolution. 1/3” Sony Super HAD II CCD. Low current draw: atherproo We 200mA@12VDC. IP65 f o r outdoor use Size: 41/4”x31/2” (108x85 mm). Wall-mount brackets available. 2 2.8~12mm We atherproo IP67 for o Mounting Brackets Model Wall Ceiling e utdoor us 960H Resolution. 700 TV Lines. 3D-NR (3D Digital Noise Reduction). DWDR (Digital Wide Dynamic Range). 28 IR LEDs for nighttime use. IR Cut filter. OSD (On-Screen Display) Elite 3X with built-in joystick. Service monitor port for convenient installation. Advanced 256x DSS (Digital Slow Shutter). 360° Triple-axis rotation. Rugged, weatherproof (IP67) construction. Dual voltage: 12VDC/24VAC. 2-in-1 Housing, flush or surface mount. 3.6mm, 540TVL 2.8~11mm, 470TVL 1/3” Sony Super HAD II CCD. 18 IR LEDs, up to 50ft (15m) range. Tamper-resistant design. Cables concealed in bracket. Day/Night operation. EV-2766-NVWQ 3X Vandal Dome Camera (700TVL) utdoor EV-2221-N3BQ EV-2801-N3BQ EV-2221-NKBQ atherpro atherproo 33 IR LEDs. 3D-NR (3D Digital Noise Reduction). Elite 600 TV Lines. 1/3” Sony Super HAD II CCD. IR Cut filter. OSD (On-Screen Display) with remote. Service monitor port for convenient installation. Advanced 256x DSS (Digital Slow Shutter). 360° Triple-axis rotation. Dual voltage: 12VDC/24VAC. 2-in-1 Housing, flush or surface mount. 2.8~12mm, 480TVL, Gray 2.8~12mm, 480TVL, White o We 1/3” Sony Super HAD II CCD. for IP65 se outdoor u 36 IR LEDs for nighttime use. 360° Triple-axis rotation. Heavy-duty vandal-resistant design. Cables concealed in bracket to prevent tampering. Split-glass design to eliminate IR reflection. Rugged, weatherproof (IP65) construction. Adjustable zoom and focus. Ceiling, wall-mount, and conduit brackets available. EV-2706-NFGQ and EV-2706-NFWQ only: 960H resolution and OSD (On-Screen Display) for programming special features. IP68use for o 2.8~12mm, 700TVL, White f WDR On (Simulated images) 3.6mm, 480TVL, White 2.8~12mm, 700TVL, Gray f WDR Off 3.6mm, 700TVL, White 3.6mm, 480TVL, Gray f 3D-NR On EV-2706-NFGQ EV-2706-NFWQ EV-122C-DVAVQ EV-122C-DVHVQ 3.6mm, 700TVL, Gray f f W 960H Resolution. for IP65 se outdoor u WDR (Wide Dynamic Range) for clear images in strong backlight. 3D-NR (3D Digital Noise Reduction) for cleaner images in low light. 1/3” Sony EXview HAD II CCD. 700 TV Lines. Sony Effio-P DSP. IR LEDs for nighttime use. OSD (On-Screen Display) for programming special features. 360° Triple-axis rotation. Heavy-duty, vandal-resistant design. Cables concealed in bracket to prevent tampering. Split-glass design to eliminate IR reflection. Rugged, weatherproof (IP65) construction. Ceiling, wall-mount, and conduit brackets available. EV-2726-NFGQ and EV-2726-NFWQ only: Varifocal lens with adjustable zoom and focus. 3D-NR Off 2.8~12mm Vandal Rollerball Cameras 3.6mm Vandal Rollerball Cameras Conduit Box Conduit Drop EV-122C-DVB3Q EV-2706-N3GQ EV-2726-N3GQ EV-DWSGQ EV-DCSGQ EV-DSSGQ EV-DDSGQ EV-122C-DVH3Q EV-2706-N3WQ EV-2726-N3WQ EV-DWSWQ EV-DCSWQ EV-DSSWQ EV-DDSWQ EV-122C-DVAVQ EV-2706-NFGQ EV-2726-NFGQ EV-DWLGQ EV-DCLGQ EV-DSLGQ EV-DDLGQ EV-122C-DVHVQ EV-2706-NFWQ EV-2726-NFWQ EV-DWLWQ EV-DCLWQ EV-DSLWQ EV-DDLWQ 42-IR LED 3X Bullet Cameras EV-1636-NKGQ EV-1636-NWGQ EV-1826-NKGQ 2.8~12mm, 700TVL 2.8~12mm, 700TVL 6~50mm, 700TVL We atherproo atherproo IP67use f We for o utdoor Elite 3X 960H Resolution. 1/3” Sony Super HAD II CCD. 12VDC Operation. Cables concealed in bracket to prevent tampering. OSD Functions programmable with controller (EV-18C --- sold separately). Optional Mounting Brackets: EV-11LR Large Round Junction Box EV-11LS Single-Gang Mounting Plate 3X Bullet Camera 3.6mm, 480TVL, 24 IR 3.6mm, 700TVL, 24 IR 1/3” Sony Super HAD II CCD. Split-glass design eliminates IR reflection. Low current draw: 250mA@12VDC with IRs on. atherproo We EV-1026-N2SQ and for IP66 se outdoor u EV-1606-N2SQ only: Up to 40ft (12m) range. EV-1026-N3SQ and EV-1606-N3SQ only: Up to 50ft (15m) range. Wide-Angle Bullet Camera EV-1665-N2BQ 42-IR LED Bullet Cameras EV-1196-N6GQ EV-1816-N6GQ EV-1196-NKGQ EV-1816-NKGQ 2.8~12mm, 700TVL 2.9mm, 480TVL, 12 IR 2.9mm, 700TVL, 12 IR 2.2mm, 700TVL 960H Resolution. 12VDC Operation. 1/3” Sony Super atherproo We HAD II CCD. for IP66 se o utdoor u 2.2mm Lens (170° viewing angle). DWDR (Digital Wide Dynamic Range). 3D-NR (3D Digital Noise Reduction). Weatherproof (IP66). 6mm, 480TVL f EV-1726-NKGQ utdoor EV-1026-N2SQ EV-1606-N2SQ EV-1026-N3SQ EV-1606-N3SQ f 960H Resolution. 3D-NR (3D Digital Noise Reduction). DWDR (Digital Wide Dynamic Range). IR Cut filter. OSD (On-Screen Display) with built-in joystick. Service monitor port for convenient installation. Programmable 8-zone privacy settings. Advanced 256x DSS (Digital Slow Shutter). Dual voltage: 12VDC/24VAC. Cables concealed in bracket to prevent tampering. f IP66use for o 56-IR LED 12- and 24-IR LED Bullet Cameras 84-IR LED Bullet Camera 6mm, 700TVL 2.8~12mm, 480TVL 2.8~12mm, 700TVL Weatherproof for outdoor use We atherproo Elite 3X Mini Bullet Camera f IP66use for o utdoor 1/3” Sony Super HAD II CCD. 12VDC Operation. Weatherproof (6mm: IP67, 2.8~12mm: IP66). EV-1816-N6GQ and EV-1816-NKGQ only: 960H Resolution and OSD functions programmable with controller (EV-18C -- sold separately). Can mount to industry standard lampholder cover plate. EV-1186-N3GQ EV-1806-N3GQ 3.6mm, 700TVL atherproo IP67use utdoor Withstands temperatures of -40°~122° F (-40°~50° C). 960H Resolution. 1/3” Sony Super HAD II CCD. 12VDC Operation. Weatherproof (IP66). f f IP66use for o atherproo IP66use utdoor Z eta Series OSD Controller We atherproo We We for o 3.6mm, 480TVL for o 2.8~12mm, 700TVL 3.6mm, 480TVL 1/3” Sony Super HAD II CCD. Weatherproof (IP66). 12VDC Operation. Low current draw: 150mA. Low-profile design. 30-IR LED Bullet Cameras Low-Temperature 42-IR LED Bullet Camera EV-1826-NKGAQ EV-1125-N3BQ f 960H Resolution. 1/3” Sony Super HAD II CCD. Dual voltage: 12VDC/24VAC. Advanced 256x DSS (Digital Slow Shutter). OSD (On-Screen Display) for easy programming. DWDR (Digital Wide Dynamic Range) for clear images in strong backlight. 3D-NR (3D Digital Noise Reduction) for clear images in low light. Programmable 8-zone privacy settings. Cables concealed in bracket to prevent tampering. 56 IR LEDs for clear images in total darkness. utdoor 960H Resolution. 1/3” Sony Super HAD II CCD. 12VDC Operation. Cables concealed in bracket to prevent tampering. Can mount to industry standard lampholder cover plate. EV-18C Program special features such as DWDR, backlight compensation, and privacy for the following models: – EV-1816-N6GQ – EV-1816-NKGQ – EV-1826-NKGQ Flexible installation allows the user to program special features from the installation site or the control room. One controller will work for several cameras. 3 Discreet Wall-Plate Camera EV-5105-N1SQ EV-6640-N3WQ 1.5mm, 700TVL EV-7605-N4WQ 3.7mm, 700TVL Low-profile design blends into nearly any décor. 960H Resolution. Small size; protrudes only 1” (26mm) from wall or ceiling. 1/3” Sony Super HAD II CCD. 3.7mm Pinhole lens. Lens rotates to nearly any angle for flexible installation. Metal case for vandal-resistance. DWDR (Digital Wide Dynamic Range) for clear images in strong backlight. 2D-NR (2D Digital Noise Reduction) for clear images in low light. 12VDC Operation. W Optional Mounting Bracket: EV-6640SWQ Surface-Mount Bracket EV-6680-N3WQ EV-6681-N3WQ 3.7mm, 700TVL 3.7mm, 700TVL, 18 IR LEDs Covert Ceiling-Mount Camera EV-6620-N3WQ 4 EV-4605-N3SQ EV-4606-N3SBQ 3mm, 700TVL 3mm, 700TVL, 24 IR LEDs EV-7100POLEM Pole-Mount Bracket Designed to easily fit corners in office buildings, elevators, jail cells, and more. 960H Resolution. 1/3” Sony Super HAD II CCD. 700 TV Lines. atherproo We 3mm Lens. for IP65 se outdoor u Weatherproof (IP65). DWDR (Digital Wide Dynamic Range) for clear images in strong backlight. 2D-NR (2D Digital Noise Reduction) for clear images in low light. 12VDC Operation. EV-4606-N3SBQ only: 24 Covert 940nm IR LEDs for discreet monitoring in the dark. 12-Inch Mirror Camera EV-6600-N2BQ 3.7mm, 700TVL Contained in a discreet ceiling-mount housing. 960H Resolution. 1/3” Sony Super HAD II CCD. 3.7mm Lens. Multiple mounting angles – camera can face either the side or the bottom of the housing. 12VDC Operation. 3.9~46mm. 1/4” Sony CCD. Up to 192x zoom (up to 12x optical zoom and 16x digital zoom). Multiple focus modes. Up to 360°/second high-speed pan/tilt motion. OSD (On-Screen Display) for programming and displaying features, settings, and preset target views. Works with Pelco-D or Pelco-P compatible controllers via an RS-485 port. Advanced 128x DSS (Digital Slow Shutter). Flexible programming capabilities: Up to 128 preset target views, each with its own characteristics such as white balance and auto exposure. Built-in heater and fan. 24VAC Operation. 20W@24VAC (with heater and fan on). EV-7100CEILM Ceiling-Mount Bracket f Contained in a discreet, non-functioning PIR sensor housing. 960H Resolution. 3.7mm Pinhole lens. 1/3” Sony Super HAD II CCD. Motion detection. DWDR (Digital Wide Dynamic Range) for clear images in strong backlight. Backlight compensation. OSD (On-Screen Display) for programming special features. 12VDC Operation. EV-6680-N3WQ only: LED lights up when motion is detected. EV-6681-N3WQ only: 18 Covert 940nm IR LEDs for discreet monitoring in the dark. utdoor Optional Mounting Brackets: Corner-Mount Cameras PIR Cameras IP66use for o 3.94~46.05mm, 600TVL eatherproo f f Low-profile design – atherproo We install on doors, walls, for IP67 se outdoor u car bumpers, entryways, and more. 960H Resolution. Vandal-resistant. Weatherpoof (IP67). Wide-angle 1.5mm lens. 2D-NR (2D Digital Noise Reduction) for clear images in low light. DWDR (Digital Wide Dynamic Range) for clear images in strong backlight. Includes two stainless-steel mounting plates (single-gang and slimline) or use without plates. 1/4” Sony EXview HAD II CCD. Adjustable mounting angle. Installs in a standard single-gang back box (not included). 12VDC Operation. Each kit includes: --- 1 Camera --- 1 Single-gang plate --- 1 Slimline plate Mini PTZ Camera (12x) Flush-Mount Ball UFO Camera 2.8mm, 600TVL Camera is mounted behind a 12” one-way observational mirror. 1/3” Sony Super HAD II CCD. 3-Axis mounting arm. DWDR (Digital Wide Dynamic Range) for clear images in strong backlight. 2D-NR (2D Digital Noise Reduction) for clear images in low light. Backlight compensation. OSD (On-Screen Display) for programming special features. 12VDC Operation. EV-7100FLUSM Flush-Mount Bracket EV-7100CORNM Corner-Mount Bracket (Special order item) Maglock Camera E-941EC2-N1Q 1.5mm, 600TVL Seamlessly integrates with existing or newly-installed electromagnetic locks, such as the E-941SA-1200, E-941SA-1K2PQ, and E-941SA-1K2PD (see pg. 11). Conveniently monitor doorways. Vandal-resistant. Wide-angle 1.5mm lens. 1/4” Sony Super HAD II CCD. Adjustable mounting angle. 12VDC Operation. Optional Mounting Bracket: E-941E-1K2/LQ “L” Bracket Patent pending IP Weatherproof Bullet Cameras EV-P1106-3SQ EV-P1206-3SQ 2MP, 1080p We IP66use H.264 Support. 3.6mm Lens. Weatherproof (IP66) for outdoor use. 10/100Mbps Ethernet interface (RJ45). ONVIF Support. 12VDC Operation. HD-SDI 36-IR LED Rollerball Camera EV-H220-4GQ utdoor H.264 Support. 3.6mm Lens. Weatherproof (IP66) for outdoor use. 10/100Mbps Ethernet interface (RJ45). ONVIF Support. 12VDC Operation. H.264 Support. 3.6mm Lens. 10/100Mbps Ethernet interface (RJ45). ONVIF Support. 12VDC Operation. HD-SDI 42-IR LED Bullet Camera HD-SDI 84-IR LED Bullet Camera 1920x1080 Resolution for crystal clear high-definition atherproo video surveillance. We IP66 f o r outdoor use 4mm Lens. 42 IR LEDs. 30FPS. 1/3” Sony 2.0MP CMOS. Weatherproof (IP66). Cables concealed in bracket. 12VDC Operation. 1920x1080 Resolution for crystal clear high-definition atherproo video surveillance. We IP66 f o r outdoor use 2.8~12mm Lens. 84 IR LEDs. 30FPS. 1/3” Sony 2.0MP CMOS. Weatherproof (IP66). Cables concealed in bracket. 12VDC Operation. DN-2 Series NVRs DR-104Q 4 Channels, 120FPS DR-108Q 8 Channels, 240FPS DR-116Q 16 Channels, 480FPS DN-204Q DN-208Q DN-216Q High-resolution recording: D1 (Up to 720x480). VGA Output (up to 1280x1024) and HDMI output (up to 1920x1080). Free CMS software and Free DDNS server. Dual-stream support. Supports internal SATA or external USB DVD/RW for easy backup and video export. Dedicated audio channel for each video channel. RS-485 Control protocols for PTZ cameras. Network hardware supports 10/100Mbps. 3-Year warranty. Available without HDD, or with 500GB, 1TB, or 2TB. ONVIF Support. High-definition recording --- up to 1920x1080. H.264 Compression. VGA and HDMI output. Remote monitoring via Internet Explorer, Firefox, Safari, and Chrome. PC and Mac compatible. Programmable features such as motion detection, events, and more. Easy and convenient firmware upgrade via USB or network. Available without HDD, or with 500GB, 1TB, or 2TB. 4 Channels, 120FPS 8 Channels, 240FPS 16 Channels, 480FPS 2.8~12mm, 1920x1080 f DR-1 Series H.264 Network DVRs EV-H121-4GQ 4mm, 1920x1080 f f 1920x1080 Resolution for crystal clear high-definition video surveillance. 4mm Lens. 36 IR LEDs. atherproo We 30FPS. for IP66 se outdoor u 1/3” Sony 2.0MP CMOS. Weatherproof (IP66). Rugged, vandal-resistant design with no exposed screws. 12VDC Operation. 2MP, 1080p IP66use EV-H120-4GQ 4mm, 1920x1080 2MP, 1080p 1MP, 720p atherproo for o utdoor EV-P2116-3WQ EV-P2216-3WQ 1MP, 720p f atherproo for o f We EV-P2106-3GQ EV-P2206-3GQ 1MP, 720p IP Low-Profile Dome Cameras IP Weatherproof Rollerball Cameras DS-1 Series HD-SDI DVRs DS-104Q 4 Channels, 120FPS DS-108Q 8 Channels, 240FPS DS-116Q 16 Channels, 480FPS Connects to HD-SDI cameras. High-resolution recording and playback over coaxial cable --- up to 1920x1080. H.264 Compression. VGA and HDMI output. Remote monitoring via Internet Explorer, Firefox, Safari, and Chrome. Programmable features such as motion detection, events, and more. Easy and convenient firmware upgrade via USB or network. Available without HDD, or with 500GB, 1TB, or 2TB. 5 12VDC Switching CCTV Power Supplies 12VDC Rack-Mount CCTV Power Supplies PS-U0406-PULQ PH-U1612-PULQ PS-U0906-PULQ PH-U3212-PULQ 4 Outputs, 6A Continuous, PTC Fuses 9 Outputs, 6A Continuous, PTC Fuses PS-U1806-PULQ 16 Outputs, 12A Continuous, PTC Fuses 24VAC Rack-Mount CCTV Power Supply PH-A1612-PUQ 16 Outputs, 12A Continuous, PTC Fuses 32 Outputs, 12A Continuous, PTC Fuses 18 Outputs, 6A Continuous, PTC Fuses Universal 100~240 VAC input. 12.6.~13.5 VDC Output. New lightweight, cost-effective design. High-efficiency switching type. Ultra-low ripple voltage for improved image quality. Adjustable output to compensate for voltage drop. Outputs protected with 2.5-Amp PTC fuses. Built-in protection against short circuit and overheating. Individual channel status LEDs. Heavy-duty steel case with removable cover. 3 5 Dimensions: 10”x7 /4”x3 /8” (254x196x92 mm). 12VDC High-Amp Power Supplies PS-U1812-PULQ Universal 100~240 VAC input. 12.6~13.5 VDC Output. High-efficiency switching type. Adjustable output to compensate for voltage drop. Outputs protected with 3-Amp PTC fuses. Built-in protection against short circuit and overheating. Dual-color LED status indicator for each output (Blue – normal, Red – fault). Dimensions (excluding bracket): 13/4”x171/2”x113/8” (44x445x289 mm). 6 Amp models available. 24VAC CCTV Power Supplies 9 Outputs, 4A Continuous, PTC Fuses EVP-1SA8P16UL 16 Outputs, 8A Continuous, PTC Fuses Individual status LEDs. Eight outputs are 12VDC. Eight outputs are 24VAC. Extra-large enclosure. Output protected with 1.1-Amp PTC fuses. 3A@12VDC. 3A@24VAC. Individual red status indicator LEDs for each output. Main power switch with surge protection to turn on/off power to outputs. Includes enclosure and transformer. Outputs protected with 1.1-Amp PTC fuses. Additional power distribution boards also available. 4 Outputs, 1.1A each, PTC Fuses PD-9PSQ 9 Outputs, 1.1A each, PTC Fuses Main input power fuse. Includes circuit board only. 5-Amp main fuse. 6 16 Outputs, 6A Continuous, PTC Fuses EVP-1SA4P9UL 36 Outputs, 12A Continuous, PTC Fuses PD-4PSQ EVP-124M6P16Q 4 Outputs, 4A Continuous, PTC Fuses PS-U3612-PULQ Power Distribution Boards 12VDC/24VAC CCTV Power Supply EVP-1SA4P4UL 18 Outputs, 12A Continuous, PTC Fuses 12-Amp supply current. Universal 100~240 VAC input. 12.6~13.5 VDC Output. High-efficiency switching type. Ultra-low ripple voltage for improved image quality. PS-U3612-PULQ is a special order item only. Dimensions: 121/8”x121/4”x35/8” (308x311x92 mm) Field-selectable 24 or 28 VAC outputs, or OFF. 110VAC Input. 12A@24VAC. Outputs protected with 3-Amp PTC fuses. Dual-color LED status indicator for each output (Blue --- normal, Red --- fault, OFF --- not in use). Removable terminal blocks for easy wiring. Rack, wall or desk (stackable) mountable. Built-in surge protection. Dimensions (excluding bracket): 13/4”x171/2”x113/8” (44x445x289 mm). 12VDC Plug-in Switching AC Adapters ST-UV12-S0.5Q ST-UV12-S1.0Q ST-UV12-S2.0Q 0.5A ST-1212-R0.5A 500mA, Regulated Use for CCTV, access control alarms, etc. 6ft (1.8m) Cord, 2.1mm plug (positive center). Tabletop Switching Power Supply ST-UV12-S5.0Q 1A 2A Sideways plug for ease of use on power strips. Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (positive center). 12VDC Linear AC Adapter ST-UV12-S1.0Q Shown Fits easily on power strip 5A LED Power indicator. Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (positive center). Includes AC power cord (IEC320-C13). LED power indicator Balun with Data or Power Pass-Through Passive Video Baluns EB-P501-01Q EB-P501-01SQ EB-P501-20Q Standard Balun Balun with Surge Protection Balun with 6” Pigtail Gold-plated BNC connector. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Passive operation – no external power required. Sleek, new design with ergonomic grip. Screw terminals for easy installation. Sold in quantities of 10. Passive Video Balun with Ground Loop Isolator EB-P101-24GQ Built-in ground loop isolator. Passive operation – no external power required. 5” Pigtail for flexible installation. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Screwless terminals for quick installation. Built-in surge protection. Video, Power, and Data Baluns EB-P101-20VQ DC Plug and DC Jack, RJ45 EVT-PB1-L05Q DC Plug, Terminal Blocks, Built-In Power Converter Transmits video, power, and data over Cat5e/6. Passive operation – no external power required. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. EB-P101-20VQ Pigtails for flexible installation. EVT-PB1-L05Q only: Power converter with 12~24 VAC/VDC input and jumper selectable output (5/12/24 VDC). Basic Passive Video Baluns EB-P101-01Q Basic Balun EB-P101-20Q Balun with 6” Pigtail Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Passive operation – no external power required. Screwless terminals for quick installation. Sold in quantities of 50. EB-P501-02Q Patented Patented design includes built-in terminals for power or data pass-through. Ergonomic grip. Gold-plated BNC connector. Passive operation – no external power required. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Passive Weatherproof Balun EB-P101-25WQ Weatherproof for outdoor use. Passive operation – no external power required. Pigtails for flexible installation. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Built-in surge protection. Passive Mid-Point VPD Combiners EB-P304-01MQ EB-P316-60MQ EB-P104-01Q Connects up to four CCTV cameras to a central location using low-cost Cat5e/6 cable. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Passive operation – no external power required. Terminal blocks or RJ45 for easy installation. Built-in surge protection. 16-Channel Passive Video Transceiver EB-P116-01Q Connects up to 16 CCTV cameras to a central location using low-cost Cat5e/6 cable. Transmits up to 1,950ft (600m) B/W or 1,300ft (400m) color. Passive operation – no external power required. Compact 1U enclosure mounts in a standard 19” rack. Terminal blocks or RJ45 for easy installation. Built-in surge protection. 4 Channels 16 Channels, Rack Mountable Installs at a point between baluns on the camera end of an installation and a video transceiver on the DVR end of an installation. Video and data signals pass through the unit to a video transceiver while power enters the unit to power the CCTV cameras. Passive End-Point VPD Combiners EB-P304-01EQ EB-P316-60EQ 4-Channel Passive Video Transceiver 4 Channels 16 Channels, Rack Mountable For use with VPD baluns such as EB-P101-20VQ. Transmits power and data to the camera while receiving video from the camera. Active Video Baluns EVT-AB1 Active Video Balun Set Patent pending EVT-TB1-42T Active Video Balun Transmitter EVT-RB1-4T2 Active Video Balun Receiver Up to 1.5mi (2.4km) with active receiver. Video, data, and surge protection. Interlockable. Includes 12VDC 0.5-Amp power adapter. Rack-Mount Active Balun Hub EVT-AH16-VT2Q 16-Port Active Balun Hub End-Point VPD Combiners with Power EB-C304-01EQ EB-D304-01EQ EB-C316-60EQ EB-D316-60EQ 4 Channels, Built-in 24VAC 4 Channels, Built-in 12VDC 16 Channels, Built-in 24VAC 16 Channels, Built-in 12VDC For use with VPD baluns such as EB-P101-20VQ. Transmits power and data to the camera while receiving video from the camera. All-in-one solution: Built-in power supply (1 Amp/channel) to power CCTV cameras. Rack mount or stackable. Compact enclosure, only 1U (13/4”, 44mm) high. Video in: 16 (terminal blocks). Video out: 32 (BNC connectors). Power input: 12~24 VDC/VAC. Includes 12VDC 1.5-Amp power adapter. Current draw: 500mA. Built-in video and data surge protection. Transmits up to 3,000ft (914m) w/ passive balun or 1.5mi (2.4km) w/ active transmitter. 7 VC-1BAQ Converts almost any LCD monitor into a security monitor. Video input auto-configure. OSD (On-Screen Display). Desktop, VESA, or wall mountable. Compact size. Output: NTSC: 720x480, PAL: 720x576. VC-3BAQ EVA-F5521-3Q Now with VESA Mount VC-2VAQ VGA Input resolution: Up to 1024x768 (DB15). Output: Composite video (BNC connector), plus VGA pass-through (DB15). OSD (On-Screen Display). Video Amplifiers 1 Input, 1 Output 4 Inputs, 4 Outputs Video amplifier compensates for video loss. Brightness and sharpness adjustments for each channel. NTSC or PAL compatible. Transmits up to 3,280ft (1,000m). Power loop-through to power nearby devices. Video Distributors 1 Input, 2 Outputs 1 Input, 4 Outputs Distributes single video input to multiple video outputs. Transmits up to 984ft (300m). NTSC or PAL compatible. Voltage: 12VDC or 24VAC. Power loop-out (VA-1102B-WQ only). Gold-plated BNC connectors. Power Converters Three models available. See pg. 19 for details. Male DC Plug, pigtail connector, 3ft. Female DC Jack, pigtail connector, 3ft. CA-161T DC Jack-to-terminal block. EVA-CB0R1Q BNC-to-RCA connector. Gold-plated connectors. 6” (15cm) Male-to-female BNC connector. Gold-plated BNC connector. MVM-T1601-1Q DC Plug-to-plug adapter. CA-1616Q Ground Loop Isolator CA-1515Q DC Jack-to-jack adapter. CA-1526-1F VG-1C12BQ DC Jack-to-double DC plug, 1ft wires. Gold-plated BNC connectors. BNC terminals for easy installation. X-714-046-18B Hook-and-loop cable tie. Organize loose cables. Video Surge Protector Illuminated Power Connectors DC Male plug, 3ft (0.9m) wire. LED Indicates power and polarity. IP Surge Protector CA-1510-3FLQ* CA-1615-06LQ* DC Jack-to-plug, 6” (152mm) wire. LED Indicates power and polarity. *Patent pending Passive USB over Cat5e/6 DE-S101Q Extend USB devices over Cat5e/6 up to 150ft (46m). USB 1.1 compliant. Active USB 2.0 over Cat5e/6 DE-A101Q DE-A104Q 1-In, 1-Out 1-In, 4-Out VS-1V12BQ Surge protection for analog cameras. BNC Male input, BNC female output. CA-1610-3FLQ* DC Female jack, 3ft (0.9m) wire. LED Indicates power and polarity. 3 Inputs, 6 Outputs BNC Connectors. Each output can easily switch to any of the video sources. Frequency: 672Hz~27MHz. 100mA@12VDC. CA-171T RJ45 to terminal block. RS-232 to RS-485 Converter Video Matrix EVA-WB0B1-08Q Output: Four RS-485 connectors. Range: Up to 3,937ft (1,200m). Connect up to 64 cameras or devices via RS-485. Connects up to 32 devices. Range: Up to 3,937ft (1,200m). DB9 Female connector for RS-232 and 2-wire removable terminal block for RS-485. CA-151R RD-304-D1Q EVA-RS1 DC Plug-to-terminal block. Extend USB devices over Cat5e/6 up to 300ft (100m). USB 2.0 compliant. 8 Black/Red Wires CCTV Accessories VGA to BNC Converter VA-1102B-WQ VA-1104B-WQ EVA-M5521-3Q Similar to VC-1BAQ, but with: Up to 1280x1024 NTSC. BNC Pass-through output. Stores settings in case of power loss. VA-2101B-WQ VA-2404B-WQ Data Distributor DC Pigtail Connectors BNC to VGA Converters IPV-PD88Q Surge protection for IP devices such as IP cameras, IP switches, and computers. RJ45 Connections. PoE Surge Protector IPV-P188Q Surge protection for PoE (Power over Ethernet) devices, such as PoE cameras and PoE switching. RJ45 Connections. HD-SDI Surge Protector VS-1V22AQ Surge protection for HD-SDI devices. BNC Male input, BNC female output. Ethernet Extenders Series Dummy Cameras IPB-A1200Q Transmits an IP signal or any other TCP/IP signals over existing coax cable. Distance: Up to 5,900ft (1,800m). 5VDC Adapter included. Ethernet Extender Similar to IPB-A1200Q, but uses Cat5e/6 cable instead of coax. Distance: Up to 3,900ft (1,200m). 5VDC Adapter included. VD-10BN VD-30SS VD-30BS VD-30BNA VD-10PL VD-20NN VD-20BN VD-20BNB Dummy Mini PTZ Speed Dome with Flashing LED (Uses 2x AA batteries) Solar-Powered Dummy Camera with Working IR LEDs (Uses 2x rechargeable AAA batteries) Dummy Bullet Camera with Flashing LED (Uses 2x AA batteries) Dummy IR Bullet Camera with Flashing LED (Uses 2x AA batteries) IPR-P188Q PoE Repeater Dummy IR Bullet Camera with Working IR LEDs (Uses 2x AA batteries) Extend the range of power and data up to 984ft (300m). No external power required. Dummy Mini Dome Camera Dummy Ball-Mount Dome with Flashing LED (Uses 2x AA batteries) Alarm Pager System 27 MHz Dummy Mini Dome with Flashing LED (Uses 2x AA batteries) Central Receiver SK-910RC4Q 5 Relay Outputs 315 MHz E-37RV Extra belt-clip vibrating receiver. Use as an alternative to AM or CB antenna. E-37ANT SK-919TP2D-P 2-Button Desktop Transmitter 315 MHz For remote activation of locks, cameras, etc. from a desk or other location. Use in offices, factories, etc. Portable, attractive, heavy-duty aluminum case. Includes rechargeable battery and power adapter. Compatible with all SECO-LARM 315MHz receivers. atherproo 315 MHz Four relays, one per channel, each 10A@24VDC. Outputs are programmable for timed (1, 2, 3, 4, 5, 10, 30, or 60 secs), toggle, latching, or validity modes. Auxiliary 12VDC relay output (wet contact): 1sec~10min adjustable via built-in potentiometer. Compatible with all SECO-LARM 315MHz transmitters. Power adapter included. Optional central receiver accessories include: Weatherproof transmitter (SK-919TPWFEUQ). Wireless LED siren (SK-910RSQ). Wireless magnetic contacts (SM-93T19Q). Wireless PIR sensor (E-9908-1T19Q). Wireless LED Siren Audible alarm sounds when triggered. Flashes LED to alert user when triggered. Weatherproof. SM-93T19Q Wireless Magnetic Contacts Weatherproof (IP65). Indoor/outdoor use. We atherproo IP65use for o f 2-Button Footswitch Transmitter We for IP65 se Weatherproof Transmitter outdoor u Similar to the SK-919TDWS-BU. (See pg. 10) With terminal blocks. Weatherproof (IP65). Indoor/outdoor use. SK-910RSQ RF Wireless Controls SK-919TP2D-F SK-919TPWFEUQ f Monitors up to three zones per premises or vehicle, plus manual paging. Connect to burglar or communications panels. Range: Up to 1/2 mile* (0.8km). Includes belt-clip vibrating receiver (E-37RV). VD-40BNA Dummy Security Camera with Flashing LED (Uses 2x AA batteries) IPB-A1100Q E-37EV VD-10BNA Dummy Box Camera with Flashing LED (Uses 2x AAA batteries) Ethernet over Coax utdoor E-9908-1T19Q Wireless PIR Sensor 20ft Sensing range. Pet immunity. *Actual range may vary greatly depending on the installation and operating environment. 9 1-Channel Receivers 2-Channel Receivers 315 MHz 315 MHz 3 and 4-Channel Receivers 315 MHz SK-910R3Q 3 Channels SK-910RB2Q SK-910RBQ SK-910RAQ, SK-910RAVQ SK-910RBQ SK-910RB2Q 11~24 VAC/VDC, 2 x 10A@24VDC relay outputs SK-910RAV2Q 11~24 VAC/VDC, 10A@24VDC relay output SK-910RAQ Mini size, 11~24 VAC/VDC, 3A relay output SK-910RAVQ Mini size, 3~13.8 VDC, 5A transistor ground output Control garage doors, house lights, etc. Output is programmable for 4sec momentary (default), 1sec momentary, toggle, or validity. (SK-910RBQ also features a latching mode.) LED Indicates RF reception, learn mode entered, transmitter learned, memory cleared. SK-910R-4Q Mini size, 3~13.8 VDC, 2 x 3A transistor ground outputs Each output independently configurable (SK-910RB2Q only). Outputs are programmable for 4sec momentary (default), 1sec momentary, toggle, or validity. (SK-910RB2Q also features a latching mode.) Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared. Similar to SK-910RB2Q, but 433.92MHz. Special order item. 2-Button Transmitters 1-Button Transmitters Factory pre-coded SK-919TD2A-UP SK-919TD2A-U DIP Switch coding Over 68 billion possible codes. LED Transmission indicator. Similar to SK-910R4Q, but 433.92MHz. Special order item. 3-Button Transmitters SK-919TP3JRUQ Factory pre-coded, over 68 billion possible codes 315 MHz SK-917TP3J-RU LED Transmission indicator. 4-Button Transmitters SK-939TS2A-PQ Same as SK-919TD2A-UP, but 433.92MHz. Special order item. SK-915BA SK-915LP 12VDC Battery for all transmitters except handheld Leather pouch for SK-919TD1S-UP, SK-919TT1S-BU & SK-939TS1S. SK-919TP1H-BUQ SK-919TP2H-NUQ SK-919TP4H-NUQ SK-919TDWS-BU Sample Application: ~~~~ 315 MHz External or internal battery power. External or internal triggering. Use to make almost any security output wireless. Other specifications similar to SK-919TD1S-UP. SK-919TP4J-NUQ Factory pre-coded, over 68 billion possible codes 315 MHz SK-917TP4J-NU Slimline Handheld Transmitters Wired 1-Button Transmitter 10 SK-910R4-4Q SK-917T2A-UQ Same as SK-919TT1S-BU, but 433.92MHz. Special order item. Same as SK-919TDWS-BU, but 433.92MHz. Special order item. SK-910R4Q Control garage doors, house lights, etc. Outputs are programmable for timed (1, 2, 3, 4, 5, 10, 30, or 60 seconds), toggle, latching, or validity modes. Individual channel status LEDs indicate RF reception, learn mode entered, transmitter learned, and memory cleared. CODEBUMP™ codehopping technology, 18 quintillion codes SK-939TS1S SK-939TDW-BUQ 4 Channels CODEBUMP™ codehopping technology, 18 quintillion codes Uncoded, over 68 billion possible codes SK-919TT1S-BU Make push-to-exit plate or keypad wireless. 315 MHz Factory pre-coded, over 68 billion possible codes 315 MHz SK-910R4Q SK-910R2-4Q Similar to SK-910RBQ, but 433.92MHz. Special order item. SK-919TD1S-UP SK-910RAV2Q 1 Button, 1 Channel 2 Buttons, 3 Channels 4 Buttons, 15 Channels Extreme durability ¯ Rubber buttons eliminate damage caused by electrostatic discharge. Gold-plated battery clips and contact points extend the life of the transmitter. Includes two 3VDC lithium batteries and visor clip. Slimline design: 31/2”x23/16”x1/2” (89x56x12 mm). SK-9HBC CODEBUMP™ codehopping technology, 18 quintillion codes LED Transmission indicator. SK-939TS4J-NU Same as SK-919TP4J-NUQ, but 433.92MHz. Special order item. Extended Range Antenna SK-91ERSD Belt-clip holster for slimline handheld transmitters X-930-089 315 MHz 3VDC Lithium battery for handheld transmitters 315 MHz Belt-Clip Holster Extends the range of SECO-LARM RF receivers. Plugs into the receiver. 1,200-lb Single-Door Maglocks 600-lb Holding Force, UL Listed 1,200-lb Holding Force, UL Listed 1,200-lb Holding Force, Bond Sensor, LED, UL Listed Indoor E-941SA-600PQ 600-lb Holding Force, Bond Sensor, LED, UL Listed Indoor 1,200-lb Holding Force, Bond Sensor, LED, Timer 1~78 sec (not UL Listed) 1,200-lb Double-Door Maglocks Indoor 300-lb Holding Force E-941SA-1K2PD Anodized aluminum housing (US28). 12 or 24 VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. Detachable faceplate. E-941SA-1K2PQ and E-941SA-1K2PD only: Built-in dual-colored status LED and bond sensor to show locking status. E-941SA-1200 and E-941SA-1K2PQ only: UL Listed. “L” Bracket and “Z” brackets available for easy mounting (see pg. 12). 300-lb Electromagnetic Locks E-941SA-300RQ E-941SA-600 E-941SA-1200 E-941SA-1K2PQ 600-lb Single-Door Maglocks Anodized aluminum housing (US28). 12 or 24VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. Detachable faceplate. E-941SA-600PQ only: Built-in dual-colored status LED and bond sensor to show locking status. UL Listed. “L” , “Z” and “U” Brackets available for easy mounting (see pg. 12). LIFETIME WARRANTY All SECO-LARM Electromagnetic Locks come with a Lifetime Warranty. For details, please contact SECO-LARM. 600-lb Double-Door Maglocks Magnet can be reversed in the housing for right-hand or left-hand swinging doors. For indoor use, similar to the 600-lb and 1,200-lb single-door maglocks. Anodized aluminum (US28). Optional mounting brackets: E-941S300R/LQ: “L” bracket E-941S300R/ZQ: “Z” and “L” bracket E-941S300R/UQ: “U”, “Z”, “L” bracket E-941SA-300 Outdoor 300-lb Holding Force For indoor and outdoor applications. Weatherproof. 3ft (0.9m) Hookup wire included. Input voltage — 12VDC. Anodized aluminum (US28). No residual magnetism. 80-lb Electromagnetic Lock E-941DA-1K2Q E-941DA-600Q Double-Door, 1,200-lb Holding Force, UL Listed Double-Door, 600-lb Holding Force, UL Listed 80-lb Holding Force E-941DA-1K2P E-941DA-600PQ Double-Door, 1,200-lb Holding Force, Bond Sensor, LED, UL Listed Double-Door, 600-lb Holding Force, Bond Sensor, LED, UL Listed For small, low-security drawers or cabinets. Holding force: 80-lb (36kg)@12VDC 110-lb (51kg)@24VDC. 12 or 24 VDC. Anodized aluminum (US28). No residual magnetism. 1,200-lb Holding force for each door. 12 or 24 VDC (selectable). Anodized aluminum (US28). No residual magnetism. MOV surge protection. Indoor Adjustable mounting bracket. Complete mounting hardware for typical installations. Detachable faceplate. E-941DA-1K2P only: Built-in dual-colored status LED and bond sensor to show locking status. UL Listed. “L” , “Z” and “U” Brackets available for easy mounting (see pg. 12). 600-lb Holding force for each door. 12 or 24 VDC (selectable). Anodized aluminum (US28). No residual magnetism. MOV surge protection. Indoor Adjustable mounting bracket. Complete mounting hardware for typical installations. Detachable faceplate. E-941DA-600PQ only: Built-in dual-colored status LED and bond sensor to show locking status. UL Listed. “L” , “Z” and “U” Brackets available for easy mounting (see pg. 12). E-941SA-80Q Indoor Maglock Camera E-941EC2-N1Q 1.5mm Patent Seamlessly integrates with pending E-941SA-1200, E-941SA-1K2PQ, and E-941SA-1K2PD. Wide-angle 1.5mm lens. ¼” Sony Super HAD II CCD. 600 TV Lines. 12VDC Operation. See pg. 4 for more details. 11 Maglock Mounting Brackets “Z” Brackets Electromagnetic Gate Locks E-942FC-1300 1,300-lb Holding Force E-941S300R/ZQ Outdoor (for E-941SA-300RQ) Gate Lock Mounting Brackets “Z” Brackets “L” Brackets E-942F1300/ZQ E-942F-1300/L E-942F-600/Z E-942F-600/L (for E-942FC-1300) E-941S-600/ZQ (for 600-lb series locks) (for E-942FC-600) E-941S-1K2/ZQ (for E-942FC-1300) (for E-942FC-600) (for 1,200-lb series locks) All of the above include one “Z” bracket and one “L” bracket for mounting on in-swing doors. The “Z” bracket consists of two parts and is adjustable for flexible positioning of the armature plate. Cover plate to hide mounting screws also included (excludes E-941S300R/ZQ). “L” Brackets E-941S300R/LQ For sliding or swinging gates. Holding force: 1,300-lb (591kg). Water- and vandal-resistant. Dual-threaded conduit fitting. 61/2 ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available. E-942FC-600 600-lb Holding Force (for E-941SA-300RQ) Programmable Annual Timer Outdoor E-941S-600/LQ SA-027HQ Annual Timer (for 600-lb series locks) E-941S-1K2/LQ (for 1,200-lb series locks) “L” Brackets are also available for special-use mounting applications where space is insufficient for the mounting of the magnet. “U” (Glass Door) Brackets E-941S300R/UQ (for E-941SA-300RQ, includes “Z”, “L”, and “U” brackets) E-941S-600/UQ For sliding or swinging gates. Holding force: 600-lb (272kg). Water- and vandal-resistant. Dual-threaded conduit fitting. 61/2 ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available. Gate Locks with Weldable Brackets E-942FC-1K3SQ (for 600-lb series locks) E-941S-1K2/UQ Outdoor 1,300-lb Holding Force (for 1,200-lb series locks) (Magnetic lock portion only) Both the E-941S-600/UQ and E-941S-1K2/UQ are adjustable for 9~13 mm glass. Plate Spacers E-941S-300/PQ (for E-941SA-300) E-941S300R/PQ (for E-941SA-300RQ) E-941S-600/PQ ( / ” for 600-lb series) E-941S-1K2/PQ ( / ” for 1,200-lb series) E-941D-600/PQ (for 600-lb double-door) E-941D-1K2/P (for 1,200-lb double-door) 3 1 16 4 Armature Plate Holder E-941S-600/HQ (for 600-lb series) Includes E-942FC-1300 gate lock with brackets for lock and armature. For outdoor sliding or swinging electric gates. Weld or bolt brackets directly to gate. Corrosion-resistant, zinc-plated brackets. Black finish matches most gates. Lock is water-resistant and vandal-resistant. Adapter and mounting hardware included. E-942FC-600SQ 600-lb Holding Force Outdoor (Magnetic lock portion only) (for 1,200-lb series) 12 Programmable 7-Day Timer SA-027WQ E-941S-1K2/HQ Used for mounting the armature plates to a metal-core door or providing extra security for the armature plate. 365-Day annual timer. New housing with protected terminals. 12~24 VAC/VDC Operation. Two Form C relays: 10A@120VAC / 28VDC. Each relay can be programmed for 50 events, total of 100 individual programmable events. Events can be set weekly, daily or hourly, 365 days a year. One egress input per relay (two total). Output can be programmed for 1~99 seconds or toggle. Same as E-942FC-1K3SQ, but 600-lb holding force and smaller profile. 7-Day Timer 7-Day timer. 12~24 VAC/VDC. One Form C relay: 10A@120VAC/28VDC. Can be programmed for 60 events. One egress input. Output can be programmed for 1~99 seconds or toggle. Manual mode button. Delayed Egress Timer SA-025EQ 12~24 VAC/VDC Operation. Lock control relay (Form C): 10A@24VDC. Remote alarm relay (Form C): 10A@24VDC. Local alarm, transistor ground output. Three relocking modes via jumper: Standard (preset), BOCA, Timed. (More timers on pg. 18.) Outdoor Access Control Keypads SK-2323-SDQ Mullion-Style Keypad 1,010 Users. 12~24 VAC/VDC Operation. Two Form C relay outputs. Each relay has programmable output time from 1~99 seconds or toggle. Rugged, weatherproof design. Backlit keys for easy nighttime use. Two egress inputs. Door sensor input. Adjustable code length (2~6 digits). All features are programmed from the keypad. Circuitry is potted with epoxy for outdoor use. SK-2323-SPQ Similar to SK-2323-SDQ, but with proximity reader. SK-2323-SPAQ Mullion-Style Piezoelectric Keypad with Built-In Proximity Reader Similar to SK-2323-SPQ, but with the following additional features: -- Piezoelectric touch keys (can be pressed with gloves on). -- Lower profile. SK-1323-SDQ Sealed-Housing Stand-Alone Keypad Features similar to SK-2323-SDQ. SK-1323-SPQ Similar to SK-1323-SDQ, but with proximity reader. Access Control Power Supplies EAP-5D1Q EAP-5D5Q 1 Output, 12/24VDC 5 Outputs, 12/24VDC Supply Current: 5A@12VDC / 2.5A@24VDC AC Power failure supervision relay with delay timer: 5 seconds, EAP-5D5Q Shown 5 minutes, 5 hours. Automatically switch to backup battery if AC fails. SK-1123-SQ CBA Series Dummy Keypad Flush Mount, 2 Outputs: 5A@28VDC (relay), 100mA@24VDC (transistor) 110 User codes. Tamper switch, security screws. Each relay has programmable output time from 1~999 seconds or toggle. Each code can be programmed for 4~8 digits. Egress input for exiting the protected premises. 12~24 VAC/VDC. Limited lifetime warranty. SK-1131-SQ SK-1123-SPQ Similar to SK-1123-SQ, but with proximity reader. Heavy-Duty Outdoor Keypad SK-3523-SDQ Rugged construction: Heavy-duty stainless steel faceplate with a coated steel backing. Up to 210 user codes. Code flexibility: Codes can be four or five digits long. 12~24 VAC/VDC Operation. Two Form C relays rated 12A@14VDC. Door sensing input allows for anti-tailgating operation. Overhead LEDs and programmable backlit keys. Each relay has programmable output time from 1~99 seconds or toggle. Wrong code lockout: After three wrong codes are entered, the keypad will go into lockdown for 55 seconds. Tamper switch: N.C. dry contact, 3A@125/250 VAC. Egress/pushbutton input. Stand-Alone Proximity Reader PR-112S-A KD-100Q Dummy Keypad 10 Cards included. Sealed and weatherproof (IP67). Mounts easily to interior or exterior walls. Up to 100 users. Output relay for timed (1~180 sec) or latch mode. Egress input for simple exiting of protected area. Tri-color wave-shaped LED status bar indicates proximity reader’s mode and status. atherproo Blue : On/Valid Card indicator. We for IP67 se Green: Programming Mode. outdoor u Invalid Card. Red: f Keypad LEDs flash. Keypad “beeps” when pressed. Weather-resistant. Uses 4x AAA batteries. One output: Form C relay output (5A@28VDC). 100 Unique 4~8 digit codes. Stainless-steel faceplate. Programmable wrong-code lockout. Programmable output relay activation buzzer. Relay output inhibit control. Auto or manual-code entry checking. Egress input. Built-in tamper (N.C.) circuit. EEPROM Memory prevents data loss. Power: 12~24 VAC/VDC. Backbox included. Limited lifetime warranty. SK-1123-FQ 5-Output Power Distribution Board used in EAP-5D5Q Power-supply board used in EAP-5D1Q and EAP-5D5Q SK-1011-SQ Surface Mount, 2 Outputs: 5A@28VDC (relay), 1A@28VDC (relay) PD-5PAQ EAP-5D1MQ Indoor Access Control Keypads Outdoor Access Control Keypads Similar to SK-1011-SQ, but with the following advanced features: Three outputs: -- Main relay: Form C, 5A@28VDC. -- Aux. relay: Form C, 1A@28VDC. -- Transistor ground output (100mA@24VDC). (Keys are backlit) 120 Unique 4~8 digit codes. Backlit keyboard is easy to use at night. Three LEDs can be wired as needed. Alarm output, mantrap, and door auto-relock features, plus much more. Backbox included. Limited lifetime warranty. SK-1131-SPQ Similar to SK-1131-SQ, but with proximity card reader. Indoor Stand-Alone Proximity Reader PR-312S-SPQ Two cards included. Up to 500 users. Up to five super-user cards for locking the system after hours. Output relay timed (1~180 sec) or latch mode. Auxiliary doorbell button. PR-312S-PQ Secondary proximity card reader for PR-312S-SPQ. Connect to the other side of a door for egress via proximity card. Proximity Cards and Keyfobs PR-K1S1-A Additional cards sold in packs of 10. EM-125 Format. PR-K1K1-AQ Proximity keyfobs. Sold in packs of 10. EM-125 Format. PR-K1S1-A and PR-K1K1-AQ are compatible with all SECO-LARM proximity reader products. 13 Electric Deadbolts SD-997B-GBQ Fail-safe operation Now with 12/24 VDC input. For concealed mounting. 5/8” (17mm) Bolt extension. Fail-safe operation (unlocks when power is lost). Narrow design: 77/8"x11/4" (200x32 mm). Door-position monitoring output (NO/NC/COM). SD-997SMB-AQ Surface-mount bracket set for SD-997B-GBQ. SD-997UB-AQ “U” Bracket for SD-997B-GBQ for glass doors. SD-997A-DQ Fail-secure operation Similar to SD-997B-GBQ, but fail-secure (locks when power disconnected). Incorporates manual lock/unlock cylinder to operate the SD-997A-DQ if power is lost. 12VDC Input. Mini Electric Deadbolt SD-997B-1SQ Fail-safe operation For cabinets or other small doors. Surface mount. Fail-safe operation (unlocks when power is lost). 1/2” (14mm) Bolt extension. 12VDC Input. Electric Shear Lock Electric Door Strikes (N.C., Turn-to-Open, Pre-Wired Switches) SD-995C SD-72051-V0 For use in metal doors Field-programmable in seconds for fail-secure or fail-safe operation. Current draw: 250mA@12VDC. Shunt switch, shunt ON/momentary OFF, single-gang plate SD-71051-V0 SD-995C24 Same as SD-72051-V0, but slimline Same as SD-995C, but 24VDC Current draw: 150mA@24VDC. SD-72002-V0 SD-994C Similar to SD-995C, but for use in wood doors SD-994C24 Same as SD-994C, but 24VDC ANSI-sized: SD-995C/SD-995C24 — 47/8"x11/4"x11/4" (124x32x32 mm). SD-994C/SD-994C24 — 715/16"x11/4"x13/8" (202x36x32 mm). Reversible for right-hand or left-hand doors. Jaw strength: 2,000-lb. Stainless-steel lip (keeper) for strength and long life. Non-polarized connection. SK-990AQ Fail Secure Holding force: 1,500-lb (680kg). Small size for use with most metal door jambs. Works with sliding, single-action, and double-action (swing-through) doors and gates. Fail-safe operation. 12/24 VDC Input. SD-993S-SB Surface-mount bracket set. SD-993S-UB ”U” Bracket for glass doors. 14 Shunt switch, maintained ON/OFF, single-gang plate SD-71002-V0 Same as SD-72002-V0, but slimline Remote Plates SS-299Q Stainless-steel single-gang plate with 3/4” D-hole. SS-199Q Stainless-steel slimline plate with 3/4” D-hole. Key Locks Power-off locking. Power unlocking. For entrance doors. (N.O., Turn-to-Close) SK-990BQ Fail Safe SS-090 Series Power locking. Power-off unlocking. For use in wood doors. Baked painted finish. Two terminals, shunt SPST. Maintained ON/OFF, key removable from both ON and OFF positions. Specify key number when ordering. Universal Door Strike SD-996C-NUQ SS-090-1H0 Similar to SS-090, but key removable in OFF position only (key #1300 only). SS-095 Series Two terminals, momentary SPST. Maintained OFF, springs back from ON, key removable from OFF only. Specify key number when ordering. Fail Safe/ Fail Secure SS-092-2A0 Includes 3 faceplates 12/24 VDC Two internal SPST switches, one always ON, one always OFF (key #1300 only). SS-090KN Series SD-993B-SS 1,500-lb Shear Lock R-T-E Key Switch Plates UL 1034 Burglary. Field-selectable for fail-safe or fail-secure operation. Field-selectable dual-voltage: 12/24 VDC. Powered by a solenoid. Reversible, non-handed design fits either right-hand or left-hand doors. Low profile: Strike is only 11/4” (32mm) deep. Includes three faceplates for nearly any type of door. Door Closer SD-C141S Surface-type door closer. Non-handed operation. Separate adjustment of both closing and latch speeds. Extra keys. Specify number when ordering. SS-090 SS-095 SS-090KN Key # SS-090-2H0 SS-095-1H0 SS-090KN-0 1300 SS-090-2H1 SS-095-1H1 SS-090KN-1 1301 SS-090-2H2 SS-095-1H2 SS-090KN-2 1302 SS-090-2H3 SS-095-1H3 SS-090KN-3 1303 SS-090-2H4 SS-095-1H4 SS-090KN-4 1304 SS-090-2H5 SS-095-1H5 SS-090KN-5 1305 SS-090-2H6 SS-095-1H6 SS-090KN-6 1306 SS-090-2H7 SS-095-1H7 SS-090KN-7 1307 SS-090-2H8 SS-095-1H8 SS-090KN-8 1308 SS-090-2H9 SS-095-1H9 SS-090KN-9 1309 SS-090-2HX SS-095-1HX SS-090KN-X 1310 Push-to-Exit Bar Rim-Type Exit Devices SD-961A-36 SD-962AR-36M Rugged, heavy-duty construction. For 36” (0.9m) doors. Actual length is 34.5” (0.88m). Includes two built-in, dual-contact switches (5A@125VAC). Includes SECO-LARM SD-969-A18 Armored Door Cord. Armored Door Cords SD-969-S18 Die-cast aluminum end caps SD-969-A18 SD-969-S18 Plastic end caps Designed to house wiring to electric locks or access control devices mounted in doors. 18” (46cm) Stainless-steel cable. SD-969-A18 Conforms to and meets ADA regulations. For use in institutions, schools, and commercial buildings where heavy-duty, reliable operation is required. Aluminum construction. SD-962AR-36A For exit doors -- Allows exit from inside while locked from outside. Reversible non-handed design. For metal or wood doors. Stainless-steel 3/4" (19mm) throw-latch bolt. Deadlocking latch. Can be unlocked for extended periods of time. Fits doors from 30"~48" (0.7~1.2m) wide. Heavy-duty steel construction. Color Video Door Phone DP-222Q Color Camera and Monitor Set DP-222-MQ Additional Monitor Simple 2-wire connection. Remotely and securely talk to visitors and unlock doors or gates. Camera and monitor turn off automatically if not in use. Includes power adapter. DP-222-MQ is also compatible with DP-234Q (below). Color Camera and Monitor Set DP-234-MQ Additional Monitor Built-in microphone on both the camera and monitor — no handset needed. Simple 2-wire connection. 700 TV-line resolution. Camera and monitor turn off automatically if not in use. Includes power adapter. DP-234-MQ is also compatible with DP-222Q (above). Wireless Video Door Phone DP-236Q Wireless monitor allows the user to communicate with visitors and unlock the door while moving through the premises. Store images of visitors on the monitor. Monitor is powered by a lithium ion battery and charges using included dock. SD-927PKC-NEQ No Touch --- just wave a hand in front of the sensor. Sensing range up to 4" (10cm). Attractive "ring" illuminator turns from red to green or green to red (selectable) on sensor activation. Reduces risk of cross contamination. Reliable IR technology senses motion. SD-927PKC-NSQ Same as SD-927PKC-NEQ, but with Spanish message. SD-927PKC-NFQ Same as SD-927PKC-NEQ, but with French message. SD-927PWCQ Grade 1 Rim-Type Exit Devices SD-962AR-36G ANSI A156.3, Grade 1 heavy-duty exit device. Conforms to and meets ADA regulations. UL Listed. For use in institutions, schools, and commercial buildings where heavy-duty, reliable operation is required. Stainless-steel construction. Hands-Free Video Door Phone DP-234Q Indoor No-Touch Sensors Same as SD-927PKC-NEQ, but with white plate and white body. Includes decals in English, Spanish, and French. Outdoor No-Touch Sensors SD-9263-KSVQ Form C. Single-gang No-Touch sensor. Adjustable sensing range and delay time. Mechanical override button. SD-9163-KSVQ SD-962SR-36I ANSI A156.3, Grade 1 heavy-duty exit device. Conforms to and meets ADA regulations. For use in institutions, schools, and commercial buildings where heavy-duty, reliable operation is required. Stainless-steel construction. Same as SD-9263-KSVQ, but slimline. SD-9263-KSQ Same as SD-9263-KSVQ, but no mechanical override button. SD-9163-KSQ Same as SD-9263-KSQ, but slimline. Entry-Type Levers SD-962H-6LB Use with SD-962AR-36G. Grade 1, through-bolted design. Rigid, non-clutch mechanism. Non-handed design, easily field-reversible. (2 Keys included) SD-962HL-4A Use with SD-962AR-36A. USD26D Finish. (2 Keys included) Non-handed. SD-9263-KS1Q Same as SD-9263-KSQ, but with Spanish message. SD-9163-KS1Q Same as SD-9263-KS1Q, but slimline. SD-9263-KS2Q* Same as SD-9263-KSQ, but with French message. SD-9163-KS2Q* Same as SD-9263-KS2Q, but slimline. *Special order item. 15 Mushroom R-T-E Plates SD-7202GC-PEQ SD-7201GC-PEQ 2" Square illuminated green pushbutton with LED for longer life. NO/NC Contacts rated 10A@125VAC. Includes switchable English, French, and Spanish messages. Stainless-steel faceplate. Green mushroom-cap pushbutton. NO/NC Contacts rated 5A@125VAC. SD-7201GCPE1Q Similar to SD-7201GC-PEQ, but with “EXIT” and “SALIDA” messages on faceplate. SD-7103GC-PEQ SD-7201GFPE1Q Stainless-steel slimline plate. Small green illuminated pushbutton. Includes switchable English, French, and Spanish messages. Similar to SD-7201GCPE1Q, but with DPDT switch. Two NO and two NC contacts, each rated 5A@125VAC. SD-7223GW-LQ SD-7201RCPE1Q Similar to SD-7202GC-PEQ, but with white plate. Similar to SD-7201GCPE1Q, but with red mushroom-cap pushbutton. SD-7251GCEX1Q R-T-E Plates with Timer Green, 1 /2” dia., illuminated, mushroom-cap pushbutton. NO/NC, DPST Contact rated 5A@125VAC. 1 SD-7202GC-PTQ Similar to SD-7202GC-PEQ, but with timer. Built-in timer, 1~180 seconds. Buzzer output for audible status. SD-7217GWQ Similar to SD-7201GCPE1Q, but with blank white plate. RF Wireless R-T-E Plates 315 MHz SD-8202GT-PEQ Green, illuminated 2" square pushbutton SD-8103GT-PEQ Slimline, small square illuminated pushbutton SD-8201GTPE1Q Green, 1½" diameter, mushroom-cap pushbutton For hard-to-wire installations. Built-in RF transmitter (Similar to SK-919TD1S-UP). Please see pg. 10 for RF receivers. Includes 9VDC battery. Vandal-Resistant RTE Plates SD-7204SGEX1Q Single-gang, vandal-resistant. 1” Diameter pushbutton. NO/NC Contacts. SD-7104SGEX1Q Slimline, vandal-resistant. 1” Diameter pushbutton. NO/NC Contacts. Illuminated R-T-E Plates SD-7201GAPT1Q Similar to SD-7201GCPE1Q, but with timer. Built-in timer, 1~180 seconds. Buzzer output for audible status. SD-7213-GSP Green mushroom-cap pushbutton. NO/NC Contacts rated 5A@125VAC. Built-in pneumatic timer, 1~60 seconds. No power required. SD-7213-RSP Same as SD-7213-GSP, but with red pushbutton. Same as SD-7213-GSP, but with stainless-steel pushbutton and guard ring. Special order item. Same as SD-7113-GSP, but with stainless-steel pushbutton and guard ring. Special order item. SD-6276-SSVQ Single-gang, vandal-resistant. 1” Diameter, illuminated red/green pushbutton. SD-7175SGEX1Q Slimline, vandal-resistant. 1” Diameter, illuminated red/green pushbutton. Timer only Piezoelectric R-T-E Plates SD-7428-GSEQ SD-7275SGEX1Q Timer only SD-7173-SSP SD-6176-SS1Q Vandal-Resistant, Illuminated Timer only SD-7273-SSP RTE Plate with Delayed Egress Timer 2” Square illuminated green pushbutton. Programmable nuisance delay timer (0~3 sec). Programmable pre-delay timer (1~30 sec). Form C relay outputs for lock relay and remote alarm. Built-in 100dB buzzer. 12~24 VDC Operation. Fits standard double gang backbox. Timer only Same as SD-7213-GSP, but slimline. SD-6276-SS1Q Similar to SD-7103GC-PEQ, but with timer. Built-in timer, 1~180 seconds. Buzzer output for audible status. Timer only SD-7113-GSP SD-7103GC-PTQ *Actual range may vary greatly depending on the installation and operating environment. 16 R-T-E Plates with Pneumatic Timer Single-gang, vandal-resistant. Field-programmable color, red or green. Weather-resistant (IP65). Built-in timer, 1~30s or toggle. Same as SD-6276-SS1Q, but slimline. Same as SD-6276-SS1Q, but English only, with override. SD-6176-SSVQ Same as SD-6176-SS1Q, but English only, with override. Pushbutton R-T-E Plates SD-7201KBQ Single-gang plate. Black pushbutton. N.C. Switch. SD-7101KBPE1Q Slimline, black N.C. pushbutton. SD-7101RAEX1Q Slimline, red N.O. pushbutton. Twin Photobeam Detectors Wireless Entry Alert System E-931CS22RFCQ E-960-D90Q Range: Up to 22ft (7m) Outdoor range: Up to 90ft (30m) E-960-D190Q Outdoor range: Up to 290ft (90m) With laser beam alignment 10~30 VAC/VDC (non-polarized). For indoor or outdoor use. NO or NC Alarm output. N.C. Tamper circuit included. Interruption time adjustable. Built-in laser beam alignment system makes for quick, easy installations. Multi-Frequency Photobeam E-964-D390Q Outdoor range: Up to 390ft (120m) With laser beam alignment The E-964-D390Q has all the same features as the E-960-D90Q, D190Q, and D290Q, including laser beam alignment. Incorporates a 4-frequency function (programmable) to eliminate the possibility of interference when multiple photobeams are located within close proximity. Quad Photobeam Detectors E-964-Q330Q Optional solar charger for sensor E-931ACC-CQ Optional counter E-931ACC-RC1Q Outdoor range: Up to 330ft (100m) 3” Round reflector E-964-Q495Q Outdoor range: Up to 495ft (150m) Entry Alert System E-964-Q660Q With laser beam alignment 12~24 VAC/VDC (non-polarized). Multi-frequency (four channels selectable). Reduces interference between multiple units installed in close proximity. Weatherproof, sunlight-filtering case for indoor & outdoor conditions. Anti-frost system with built-in heater. NO or NC Alarm output. N.C. Tamper circuit included. Quick, easy installation with built-in laser beam & audible alignment system. Built-in alignment-strength indicator. Dummy Photobeam Detector Strong ABS plastic construction. Wall or pole-mountable. Flashing red LED. Uses 2 x AA batteries. E-931ACC-SPQ 2” Square reflector Outdoor range: Up to 165ft (50m) Outdoor range: Up to 660ft (200m) Additional wireless speaker E-931ACC-R2Q E-964-Q165Q BD-T100Q For monitoring a driveway or for use as an entrance indicator. No wiring neccessary between sensor and speaker. Sensor range: Up to 22ft (7m). Wireless range: Up to 328ft (100m) between the sensor and speaker. Sensor can pair with an unlimited number of speakers. Speaker can pair with up to five sensors. Sensor is weatherproof for outdoor use. Speaker makes chime or alarm sound when beam is interrupted. Alarm output is adjustable from 3~30 s. E-931ACC-SFQ 4 Frequencies to eliminate interference E-931-S35RRQ Range: Up to 35ft (10m) Uses 12~240 VDC/ 24~240 VAC. Pre-wired 6ft (1.8m) cord. Weatherproof (IP66). Brackets and mounting hardware included. Outdoor range: Up to 190ft (60m) E-960-D290Q Reflective Photobeam Sensors E-931CS22RRCQ Range: Up to 22ft (7m) For entrance monitoring or entrance indicator. Speaker makes chime or alarm sound if beam is interrupted. Plug-in components. No hard wiring needed. Includes reflector, brackets, 9VDC adapter, mounting hardware, chime. Optional counter also available. E-931ACC-CQ Optional counter E-931ACC-R2Q 2” Square reflector E-931ACC-SQ Additional speaker/chime for the E-931CS22RRCQ E-931-S45RRQ Range: Up to 45ft (14m) Adjustable response time and sensing range. Uses 12~250 VAC/VDC. Weatherproof (IP66). Includes round reflector hood. E-931ACC-RC1Q 3” Round reflector E-931ACC-HR1Q Hood for the E-931ACC-RC1Q or E-931ACC-R2Q (2” square reflector) Polarized Reflective Beam Sensor E-931-S33PRQ Range: Up to 33ft (10m) Immune to shiny objects. Uses 12~250 VAC/VDC. Removable terminal blocks. Weatherproof (IP66). Anti-condensation housing. Optional reflector hood available. See E-931ACC-HR1Q above. 50ft Reflective Photobeam Sensor E-931-S50RRQ Range: Up to 50ft (15m) Uses 12~250 VAC/VDC. Removable terminal blocks. Weatherproof (IP66). Anti-condensation housing. Optional reflector hood available. See E-931ACC-HR1Q above. 50ft Large Reflective Sensor E-931-S50RRLQ Range: Up to 50ft (15m) Uses 12~250 VAC/VDC. Weatherproof (IP65). Includes hood for sensor and reflector. Wall or pole-mountable. Larger sensor and reflector for more convenient alignment and adjustment. 17 Power Supply Chargers Curtain Sensors E-9611-2B25 Black Enclosure 2 Beams, 111/4” (29cm) long E-9622-4B25 E-9622-4W25 Black Enclosure White Enclosure 4 Beams, 221/2” (57cm) long E-9644-6B25 E-9644-6W25 Black Enclosure White Enclosure 6 Beams, 441/2” (113cm) long ST-1206-1.5AQ ST-2406-2AQ ST-2406-3AQ ST-2406-5AQ ST-2406-7AQ ST-2406-10AQ SA-025Q ST-2406-2AQ Convert low-voltage AC input power to low-voltage DC output power. E-9680-10B25 Regulated and filtered output voltage. Short-circuit protection. ST-2406-10AQ Built-in backup battery charger. Switches to backup battery automatically in case of power loss. Black Enclosure 10 Beams, 80” (203cm) long Range: Up to 25ft (7.5m) outdoor, 50ft (15m) indoor. 1-Amp relay. NO or NC Relay output. Slimline design: 15/16”x7/8” (34x23 mm). Programmable trigger: One beam or two adjacent beams. Long-Range Barrier Sensors E-9626-2B190Q E-9643-4B190Q 4 Pairs, 43” (109cm) Current (peak) ST-1206-1.5AQ 6/12 1.5A 2A ST-2406-2AQ 6/12/24 1.5A 2A ST-2406-3AQ 6/12/24 2.5A 3A ST-2406-5AQ 6/12/24 6/12/24 6/12/24 4A 7A 5A 7.5A 9A 10A 4 Frequencies 8 Pairs, 79” (201cm) Range: Up to 196ft (60m) outdoor, 393ft (120m) indoor. 1-Amp relay output. NO or NC Alarm output. Adjustable interruption time. Built-in heater. Single Photobeam Detector E-961-S90WQ Range: Up to 90ft (30m). IP66 for Indoor/outdoor use. o Mounts flat or at 90 to the wall with no need for extra brackets. Adjustable lens angle. ST-UV16-W50Q ST-UV16-W100Q ST-UV24-W50Q ST-UV24-W100Q ST-UVDA-W100Q ST-UVDA-W180Q ST-UV28-T350Q (More timers on pg. 12) Relay Boards Easily fit inside alarm panel enclosures SR-2112-C7AQ/10 12/24 VDC Operation. 7-Amp relay, SPDT, Form C. 12/24 VDC Trigger. Breakaway 10-pack. 16VAC/50VA 16VAC/100VA 24VAC/50VA 24VAC/100VA 24/28 VAC/100VA* 24/28 VAC/180VA* 28VAC/350VA Dual-input voltage: 120/240 VAC, 50/60 Hz. Works with the SECO-LARM series of power supplies/ chargers. Shielded windings to reduce electromagnetic interference. E-932-D33TBQ * Dual-voltage output: 24 or 28 VAC Photoelectric Through-Beam Sensor Range: 33ft (10m) Siren E-932-S16RRQ Photoelectric Reflective-Beam Sensor Range: 16ft (5m) Flush-mount design. Fits single-gang box. For entrances, hallways, offices, etc. SR-2206-C5AQ 6/12 VDC Operation. 5-Amp Relay, DPDT, Form C. 6/12 VDC Trigger. Large terminal blocks for easy installation. SR-2212-C5AQ 12/24 VDC Operation. 5-Amp relay, DPDT, Form C. 12/24 VDC Trigger. Large terminal blocks for easy installation. SR-1212-C2ALQ Flush-Mount Beam Sensors 182 Miniature: 13/16"x29/32"x5/8" (30x58x16mm). Adjustable from 1~180 sec. Buzzer output. Form C relay. Open-Frame Transformers E-9661-6B190Q E-9679-8B190Q Current ST-2406-7AQ ST-2406-10AQ 2 Pairs, 26” (66cm) 6 Pairs, 61” (155cm) Voltage (DC) Model # Triggered by positive voltage (+DC), closure of dry contact, or opening of dry contact. Adjustable from 1sec to 60min. Form C relay. Multiple program settings. SA-026Q E-9660-8B25 Black Enclosure 8 Beams, 60” (152cm) long Programmable Timers SH-532L 128dB Multi-tone siren. Miniature size: 3¼” long, 3½” diameter. 6~12 VDC, 1.4-Amp current draw. 12/24 VDC Operation. Low current draw: 15mA. 2-Amp relay, DPDT, Form C. 3~24 VDC Trigger. Large terminal blocks for easy installation. SR-1212-C7ALQ 12/24 VDC operation. High-sensitivity, low-trigger voltage. Two 7-Amp relays, SPDT, Form C. 3~24 VDC Trigger. 12VDC Plug-in Switching AC Adapters ST-UV12-S0.5Q ST-UV12-S1.0Q ST-UV12-S2.0Q SM-431-T 0.5A 1A 2A Sideways plug for ease of use on power strips. Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (positive center). ST-UV12-S1.0Q Shown Fits easily on power strip 12VDC Linear AC Adapter 500mA, Regulated Use in CCTV, access control alarms, etc. 6ft (1.8m) Cord, 2.1mm plug (positive center). LED power indicator ST-LA108-TPQ DC Pigtail connector. Input voltage: 16~28 VAC/VDC. Output voltage: 12VDC. Output current: 0.8-Amp. ST-LA115-TPQ Similar to ST-LA108-TPQ, but with a 1.5-Amp output current. Terminal blocks. Input voltage: 18~24 VAC/VDC for 12VDC, 24~28 VAC or 26~28 VDC for 24VDC. Output voltage: 12/24 VDC. Output current: 3A@12VDC, 1.5A@24VDC. ST-HB105-TTQ Compensates for DC voltage drops over long cable runs: 7~12 VDC input for 12VDC outputs. 12~24 VDC input for 24VDC output. Output current: 500mA@12/24 VDC. SM-226LQ SM-207Q N.C. Overhead door with “L” bracket. 24” Stainless-steel cable. 23/4” Gap. SM-226L-3Q NO/NC Overhead door with “L” bracket. 23/4” Gap. SM-226RQ N.C. Overhead door with round bracket. 24” Cable. 3 2 /4” Gap. Surface-Mount Contacts SM-200Q N.C. Surface mount with screw terminals. 3 /4” Gap. Includes cover. Available in brown or white. SM-300Q/W N.O. Surface mount with screw terminals. 3/4” Gap. Includes cover. SM-823 -- Additional terminal cover. SM-207-5Q Power Converters Voltage Booster Overhead Door Contacts SM-407-5T/W N.C. 3/8” Press-fit mount with leads. 1” Gap. Available in brown or white. 5A ST-LA130-TTQ SM-433-T Concealed Screws, Surface Mount For N.C. circuits. Concealed screw terminals. 11/4" Gap. Available in brown or white. Recessed Contacts Tabletop Switching Power Supply LED Power indicator. Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (positive center). Includes AC power cord (IEC320-C13). Quick-Connect, Surface Mount For N.C. circuits. External screw terminals. 1" Gap. Available in brown or white. Quick-Connect, Recessed Mount For N.C. circuits. External screw terminals. 3/4" Gap. ST-1212-R0.5A ST-UV12-S5.0Q Quick-Connect Magnetic Contacts N.C. Mini 3/8” press-fit mount 3 with leads. /8” Gap. Available in brown or white. SM-207-5LQ N.C. Mini 3/8” press-fit mount with leads. 1” Gap. Available in brown or white. SM-207-31 N.C. Mini 1/4” press-fit mount. 1” Gap. SM-207-41 N.C. Mini 3/8” press-fit mount. 13/4” Gap. SM-206Q N.C. 1/4” Recessed mount with leads. 1” Gap. Available in brown or white. Self-Stick Contacts SM-204 N.C. Mini self-stick surface mount with flange and center leads. 1” Gap. Available in brown or white. SM-205Q N.C. Mini self-stick surface mount with flange and side leads. 1” Gap. Available in brown or white. SM-204M -- Magnet only for SM-204 and SM-205Q. Wide Gap Contacts SM-216Q N.C. Wide-gap surface mount with screw terminals. 23/4” Gap. SM-216M -- Magnet for SM-216Q. Available in brown or gray. SM-217Q/W N.C. Wide-gap mini surface mount with concealed screw terminals. 2” Gap. Screen Contact SM-266/BR N.C. Super-thin screen mount with leads. 1 1 /4” Gap. Magnetic Contact Accessories SM-852L Aluminum “L” bracket for SM-226LQ. SM-831 Alnico 5 magnet, 11/4”x1/4” dia. Alnico 5 magnet, 15/8”x3/8” dia. SM-841 SM-851 Aluminum “Z” bracket for SM-216Q. 19 Voice Dialer E-920B SS-077Q With 2 NO/NC triggers N.C. Latching panic button. SS-078Q N.O. Latching panic button. SS-040Q N.C. Vibration/shock sensor. Adjustable sensitivity. Available in white or brown. Two NO/NC triggers. Two independent channels. Stores up to four numbers. Delivers message of up to 16sec to each number. Repeats message for one minute to ensure full delivery. Optional 9VDC internal battery. Use worldwide with Universal Dial Tone. Multi-Purpose Battery Testers ST-BT02Q SS-074Q/BG N.O. Double-button momentary hold-up switch. N.O. “EMERGENCY” button. NO/NC “EMERGENCY” button. SS-075C-PEQ ST-BT02Q Shown High-Speed Latching Tester ST-BL01Q Real-time, latch, and auto-reset modes for testing NO and NC circuits. Features LED and buzzer indicator for remotely testing a connection. Convenient headlight LED to guide your way. Low Battery Cutoff ST-BD01Q Prevents deep discharge of backup batteries. Selectable input: 12/24 VDC. Adjustable voltage cutoff and restore point. Green LED AC indicator & 2-color LED DC indicator. 202 For N.O. Tamper circuits. Same as ST-BT02Q, but 12 or 24 VDC. Includes headlight, LED and buzzer. SS-073Q SS-075CQ ST-BT03Q For N.C. Tamper circuits. Indicates the condition of rechargeable gel-type 12VDC batteries. Equipped with a momentary simulated load. Portable and easy to use. SS-072Q SS-075Q 6-in-1 12VDC Battery Tester with continuity LED Test for: 1. Voltage 2. Battery load 3. Voltage drop 4. PTC fuse 5. Polarity 6. Continuity Strobe Lights Detectors and Switches Emergency & Push-To-Exit NO or NC (selectable) momentary contact. Three labels included. SS-076Q Toggle switch. Available in gray or white. SS-032Q/RD Red N.O. Button SS-033Q/BK Black N.C. Button SS-202UL Foil Connection Block 12-Inch LED Strips SL-S212 Available in four colors: White, red, blue or yellow (/WAQ, /RAQ, /BAQ, /YAQ). 12-LED Strips for informative or decorative applications. 12VDC Operation. Each strip can be cut to varying lengths depending on the application. Connect up to 30 strips in series. Requires one power connector (SL-SAS-PC1Q), sold separately. Optional accessories: ● SL-SAS-PC1Q Power Connector ● SL-SAS-EC1Q End Cap ● SL-SAS-SH1Q LED Strip Fastener SL-126Q Indoor For 6~12 VDC use SL-126-A24Q (SL-126Q) For 6~24 VDC use Easy 2-wire connection for 6~12 VDC or 6~24 VDC. Choice of amber, blue, clear, green, or red. Incorrect polarity cannot damage circuit or draw current. Low current draw with long-operating lifespan of over 300 continuous hours (2,000,000 flashes). Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic. LED Strobe Lights SL-1301-EAQ Basic LED Strobe Light SL-1301-BAQ Programmable Flash and Speed Choice of amber, blue, clear, green, or red. Operating life of 50,000 hours (5.7 years) of continuous use. Less heat generated than a xenon-tube strobe. 9-Volt backup battery option for continuous operation. IP66 Outdoor LED Strobe Lights with Siren SL-1301-SAQ Choice of amber, blue, clear, green, or red. Built-in siren for both audible and visual notification. Ultra-bright: Twice as many LEDs as the SL-1301-BAQ. Operating life of 50,000 hours (5.7 years) of continuous use. 9-Volt backup battery option for continuousoperation. Strobe Light Accessories Compatible with all SL-126 and SL-1301 Series strobe lights. SL-126LQ Replacement lens. Available in amber, blue, clear, green or red. SL-1901-DAQ Conduit drop bracket SL-1901-JAQ Conduit box bracket Extender for HDMI over Dual Cat5e/6 High-Intensity LEDs SL-1311-MA 4 High-intensity 1W LEDs Outdoor MVE-AH010Q Extenders for HDMI A/ V Multi-Media Available in four colors: Amber, clear, blue or red. 10~30 VDC Operation. 19 Programmable flash patterns. Synchronize up to 15 units. Glass-Break Detector, Audio ENFORCER 190 Audio discriminator. Patented design detects high-frequency sound of glass breaking while filtering out ambient environmental noise. When ceiling mounted, protects to a 25ft radius. Protects 45ft to the front and 25ft to either side. 2-Amp dry contact relay. Buzzer Connect HDMI equipment using low-cost Cat5e/6 UTP cables. Works with full-motion video and audio signal up to 195ft (60m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to eliminate feedback. Compact size. 5VDC Power supply included. Supports DDC, EDID, and hot-plug detection. Wall-Plate Extender for HDMI over Dual Cat5e/6 Miniature 85dB electronic buzzer. 5~15 VDC, surface mount or mount in 3/4" (19mm) hole of alarm panel or remote plate. Low current draw of 35mA@12VDC. Key Locks Up to 230ft (70m) Up to 230ft (70m), Wallplate MVE-AT11-02NQ MVE-AT11-W2NQ MVE-AH11-W2Q SH-504Q MVE-AT11-01NQ MVE-AT11-W1NQ Up to 330ft (100m) Up to 330ft (100m), Wallplate A/ V Multi-Media Connect HDMI equipment using low-cost Cat5e/6 UTP cable. Supports 3D. IR Pass-through carries remote control signals from the monitor’s location back to the source. HDMI over single Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Compact size. 5VDC Power supply included. MVE-AT11-02NQ and MVE-AT11-W2NQ only: Built-in 2-port ethernet switch. Wireless Extender for HDMI A/ V Multi-Media Transmits HDMI signal over dual Cat5e/6 cables. Range: Up to 164ft (50m). Resolution: Up to 1080p. Single-gang wall-plate design for convenient and attractive installations. MVE-WH010Q A/ V Multi-Media (N.O., Turn-to-Close) SS-090 Series Two terminals, shunt SPST. Maintained ON-OFF, key removable from both ON and OFF positions. Specify key number when ordering. SS-090-1H0 Extender for HDMI over Single Cat5e/6 MVE-AH020Q A/ V Multi-Media Similar to SS-090, but key removable in OFF position only (key #1300 only). SS-095 Series Two terminals, momentary SPST. Maintained OFF, springs back from ON, key removable from OFF only. Specify key number when ordering. SS-092-2A0 Two internal SPST switches, one always ON, one always OFF (key #1300 only). SS-090KN Series Extra keys. Specify number when ordering. See pg. 14 for key number chart. Wirelessly transmits HDMI from a DVR, Blu-Ray player, or other high-definition source to a monitor. Range: Up to 98ft (30m). Supports resolutions up to 1080p. Signal can pass through walls. IR Pass-through carries remote control signals from the monitor’s location back to the source. Two 5VDC adapters included. Active DVI Extender Connect HDMI equipment using low-cost Cat5e/6 UTP cable. Works with full-motion video and audio signal up to 164ft (50m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to eliminate feedback. Compact size. 5VDC Power supplies included. Supports DDC, EDID and hot-plug detection. MVE-AD11-01Q DVI Extender A/ V Multi-Media Transmits DVI over one Cat5e/6 cable. Up to 1080p. Extends range up to 160ft (50m). Powered on both ends (two 5VDC adapters included). HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 21 MVE-SV010Q A/ V Transmits VGA signals over shielded Cat5e/6 cable. Use with personal computer, DVR, etc. with VGA output to CRT or LED monitors or VGA projectors. Up to 443ft (135m) range. Passive device. No power required. Sold in pairs. Multi-Media VGA Extender 1-In-2-Out MVD-V1501-1Q MVM-AH44-01YQ 4-In, 4-Out A/ V Multi-Media Supports resolutions up to 1080p. Supports 3D. IR Pass-through for remote control support. Desk or wall-mountable. Small size: 11”x63/16”x11/8” (280x157x28 mm). HDMI Switch MVS-AH41-01NQ Active VGA Extenders MVD-V1201-1Q High-Speed HDMI Cables HDMI Matrix Passive VGA Balun A/ V Multi-Media VGA Extender 1-In-5-Out Transmits VGA signals from a single source to multiple CRT or LCD monitors or VGA projectors. Extends VGA range up to 984ft (300m) over one Cat5e/6 cable. Supports up to 1920x1200 resolution. Each set includes one transmitter and one receiver. Additional receiver (MVD-V1101-1RQ) available. Powered (5VDC adapter included). Easily switch between any of four HDMI sources by remote control or pushbutton. Supports resolutions up to 1080p. Supports 3D. IR Remote control included. Multi-Media Similar to MVE-PC015Q, but wall-plate version. 22 6ft (1.83m), 28AWG 10ft (3m), 28AWG 16ft (5m), 28AWG 20ft (6m), 26AWG 25ft (7.6m), 26AWG 30ft (9m), 26AWG 50ft (15m), 26AWG A/ V Multi-Media 3D Support. 4K Support. Up to 1080p. Supports ethernet (100Mb/s). Category 2 cable. Lifetime warranty. MC-2201Q HDMI Splitter MVD-AH14-01NQ Transmits a single HDMI source to up to four different displays. Supports resolutions up to 1080p. Supports 3D. A/ V Multi-Media A/ V Multi-Media MVA-VH01Q Input: VGA connector and dual RCA jacks (red/right, white/left). Output: HDMI jack. HDCP Pass-through. 5VDC Power adapter included. A/ V Multi-Media For joining two HDMI cables together. Gold-plated contacts. Compatible with all 19-pin HDMI cables, supports HDCP. MC-2101Q Similar to MC-2201Q, but rotates 180°. Use for running HDMI cables in tight locations. VGA & Stereo to HDMI Converter Component Video Baluns MVE-PCW15Q 3ft (1m), 28AWG HDMI Couplers Additional receiver for the MVD-V1201-1Q and MVD-V1501-1Q. Powered (5VDC adapter included). Transmits YPbPr or RGB video signals. Four RCA connectors to RJ45 jack. Supports HDTV (480i/480p/720i/720p/1080i/1080p). Maximum distance: 164ft (50m)@1080p, 900ft (300m)@480i. Passive operation, requires no power. Stackable or wall mountable. Programmable digital audio or IR pass-through. 1.5ft (0.5m), 28AWG A/ V MVD-V1101-1RQ MVE-PC015Q MC-1102-18NQ MC-1102-03FQ MC-1102-06FQ MC-1102-10FQ MC-1102-16FQ MC-1102-20FQ MC-1102-25FQ MC-1102-30FQ MC-1102-50FQ HDMI Repeater MVR-HH01Q A/ V Multi-Media Extends high-definition video and digital audio up to 115ft (35m). Supports high-definition video up to 1080p. A/ V Multi-Media IR Over HDMI Composite Video Baluns MVE-PB010Q RCA Plug, Terminal Block MVE-PN11-01Q A/ V Multi-Media MVE-PB020Q RCA Jack, RJ45, Snap-In Transmits composite video over low-cost Cat5e/6. Up to 2,230ft (680m) color, 2,550ft (780m) B/W. Transmit IR remote signals over HDMI cables. Use with HDMI extenders, switches, and matrixes. Convenient for applications where the HDMI source is not near the monitor. A/ V Multi-Media Keyless Entry/Alarm Vehicle Security Systems E-100LB Entry-Level Alarm Entry-level alarm system packed with the most wanted features including two slimline 4-button RF remote controls, relay for flashing parking lights, and outputs for door locks and starter disable. Two 4-button RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Dual-stage shock sensor (patented). 128dB Multi-tone siren. 5-Function LED indicates alarm arming, armed, disarmed, valet mode, and RF transmitter reception. Multi-function pushbutton for valet, emergency disarm, and one-time passive arming. Instant triggering with multiple trigger inputs Domelight supervision. Multiple programming options such as: --- Active/passive arming. --- 0.5/3.5-Second door lock/unlock output. --- Switch sensing. --- Ignition lock/unlock. Vehicle Accessories SLI® 840 High-End Keyless Entry/Alarm For use in almost any vehicle security application. Use as a keyless entry system, or as a complete multi-featured alarm. Special order item. Two 4-button “Icon” RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Domelight supervision output. Dual-stage shock sensor (patented). 128dB Multi-tone siren and separate horn-honk output. 7-Function LED. Multi-function pushbutton. 13 Programming functions. SLI® 259A Dual-Stage Microwave Sensor Use on vehicles with cloth or open tops, or open sunroofs. Dual-stage protection: Chirps siren if exterior zone violated (someone gets too close to car), triggers alarm if interior zone is violated (break-in or vandalism attempt). SS-052B Dual-Stage Electromagnetic Shock Sensor Dual-stage protection: Chirps siren if car lightly tapped, triggers alarm on break-in or vandalism attempts. SS-051ME Dual-Stage Glass-break Sensor Includes remote microphone with 3ft cable for easy mounting and concealing inside the car. Dual-stage protection: Chirps siren on light tap of window, triggers alarm on break-in. SLI® 820R Keyless Entry Upgrade Alarm SR-5201R Power Door Lock Interface Allows nearly any alarm to control nearly any type power-door lock/unlocks. Includes two pre-wired, built-in, heavy-duty 30-Amp relays with protecting diodes and spike/noise suppressors. E-300L Full-Featured 3-Channel Alarm Two 3-button RF remotes. Door lock outputs (+/-). Starter-disable output. Flashing parking lights (built-in relay). Dual-stage shock sensor (patented). Dual-stage glass-break sensor. 128dB Multi-tone siren. 5-Function LED indicates alarm arming, armed, disarmed, valet mode, and RF transmitter reception. Multi-function pushbutton for valet, emergency disarm, and one-time passive arming. Instant triggering with multiple trigger inputs. Domelight supervision. Multiple programming options such as: --- Active/passive arming. --- Permanent disarm or automatic rearm. --- Chirp/no chirp. --- 0.4/6.4-Second door --- Current and/or switch sensing. lock/unlock output. --- NO/NC trigger input. --- Ignition lock/unlock on/off. --- Automatic starter disable on/off. Upgrades factory keyless entry system by adding a complete security system. Disarm defeat input prevents thieves from using the car’s unlock switch to disarm alarm. Includes dual-stage electronic shock sensor. Built-in parking light relay. Starter disable output. SLI® 820RA X-187-037-1SC Relay SPDT, 12V, 30A/40A Heavy-duty automotive relay. SS-066TL Pin Switch European-style pin switch. SS-061LSN Pin Switch Patented heavy-duty, long, steel body with nylon fiberglass shaft and stainless-steel contact terminal. Similar to SLI 820R, but without the siren or shock sensor. Immobilizers SLI® 762FP-ISS Touchkey Immobilizer The Touchkey Immobilizer combines high security with the convenience of completely passive arming. To arm, turn off the ignition. 30 Seconds later, up to two of the car’s electrical circuits are disabled. To disarm the system, insert the Touchkey momentarily into the Touchkey receptacle. Start the vehicle within 30 seconds or the Immobilizer will rearm. Two Touchkeys supplied with each unit. Handsomely crafted backlit receptacle. Flashing status LED indicates immobilizer armed, disarmed, code-learning mode, and valet override. SLI® 762PP-ISS Passive Proximity Immobilizer The Passive Proximity Immobilizer eliminates the hassle of remembering how and when to operate a vehicle security system. Just put the included keyfob on the keychain, and the system arms and disarms automatically. Two on-board relays for disabling the starter, ignition, or fuel pump. Installer test mode helps determine best position for the sensing coil. Plug-in status LED included. No valet switch needed. 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2013:12:23 09:07:08-08:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2014:02:17 08:38:00-08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:73c83cde-e715-4604-9d13-e0c8d008205e Original Document ID : adobe:docid:indd:4afdd7dd-8b8a-11e2-9be9-8f747b5941f0 Document ID : xmp.id:6D36ECA7F46BE3118A62DA794B21DD90 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FFCA2D731668E311B55ADAD8B58524DB Derived From Document ID : xmp.did:FFCA2D731668E311B55ADAD8B58524DB Derived From Original Document ID: adobe:docid:indd:4afdd7dd-8b8a-11e2-9be9-8f747b5941f0 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:12:23 09:07:08-08:00 Metadata Date : 2014:02:17 08:38-08:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 24EXIF Metadata provided by EXIF.tools