C51ET050252 TCFForm 501668 CE Report Linktek
501668 Fcc Report Linktek 501668_FCC__report--Linktek 501668_FCC__report--Linktek CertsReports 501668 ProductFiles assets.mhint
2016-04-11
: Pdf 501668 Ce Report Linktek 501668_CE__report--Linktek CertsReports 501668 ProductFiles
Open the PDF directly: View PDF 
.
Page Count: 139
| Download | |
| Open PDF In Browser | View PDF |
APPLICATION FORM
We hereby order examination by Nemko as specified below. When the order is received, Nemko will provide an Order Confirmation
which, together with the signed Application Form, will constitue a binding agreement between the applicant and NEMKO. The
appropriate conditions are described overleaf.
Name and address
APPLICANT
Our reference./ contact person: Mr. Jason Chang
Cameo Communications, Inc
Possible other invoice reference:
TRAINING RESEARCH CO., LTD.
No. 42, Min Chuan East Road, Section 6, Taipei 114,
Phone: 886-2-2693-5155 ext.32
Taiwan
Fax/E-mail: 886-2-2693-4440 /
jack@trclab.com.tw
MANUFACTURER
Name and address
FACTORY/
PROD. SITE
Name and address
PRODUCT
CATEGORY
MARKING ON
THE PRODUCT
802.11g Wireless PC Card
(if different from
the applicant)
Cameo Communications, Inc
6F, NO. 22, Chung Shin Rd., Hsi-Chih, Taipei 221, Taiwan
(if different from
the manufacturer)
Model/type: WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A
Data:
Other specification: 802.11g
Wireless PC Card
Name/trade mark/logo *) CAMEO, Level One, LG, Etherwan, Allnet GmbH
THE ORDER
COMPRISES
⌧ New order
Repeated examination, please indicate previous Nemko Order No.:
...................................
Complete Nemko product certificate *)
Nordic Certification Service *) for:
Denmark
Finland
Sweden
Iceland *)
Testing for European certification (CCA), relevant countries: *)
Testing for international certification (CB), relevant countries: *)
Statement of conformity with standard for one product sample *)
Test report according to the following standards/specifications:
Attestation of conformity with:
⌧ Other:
SUBMITTED/
ENCLOSED
The EMC-Directive
Other relevant Directives *)
*) Conformity assessment for letter of opinion R&TTE Directive
Extra components ⌧ Declaration of Identity *)
Test sample(s)
⌧ Wiring/circuit diagram(s) ⌧ Part list
⌧ User’s instruction Mounting instruction
⌧ Drawing(s)
⌧ EMC test report
⌧ Test report(s) from others
List of applicant(s)/contact(s) in secondary countries for Nordic Certification Service *)
⌧ Other: See attached TCF
SPECIAL
INFORMATIO
N
Test sample(s)
after examination::
Collected by applicant 1)
To be discarded by Nemko
Certificate(s) from others
Self declaration (conformity
with the EMC Directive)
Returned at applicant’s cost
Completed Questionnaire
on Production surveillance *)
Enclosed
Submitted previously
Will be forwarded
Power of Attorny *)
Enclosed
Submitted previously
Will be forwarded
Certificate desired in:
English
Norwegian
Other *
Delivery of result:
Remarks:
By mail
Preliminary by fax *)
By courier express service *
We recognize and accept the technical, commercial and legal conditions described overleaf, as far as these are applicable to the specified assignment.
The undersigned is authorized to sign on behalf of the applicant.
2005/4/27
Date
*) Confer separate Guidance
Cameo Communications, Inc (Jason Chang / Wireless Comm. R&D Dept. Manager)
Binding on the applicant
1) Will be discarded by Nemko if not collected or notice given within 4 weeks after dispatch of the Return
Notice. The same applies if not ticked in any of the boxes for “Test sample(s) after examination”.
APPLICATION FORM - R&TTE APPENDIX
We hereby order Notified Body assessment by Nemko as specified below. When the order is received, Nemko will provide an Order Confirmation, which together with the
signed Application Form, will constitue a binding agreement between the applicant and Nemko.
APPLICANT
Name and address
PRODUCT
Category
Model/type
802.11g Wireless PC Card
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A
Frequency range
Range
Harmonized
RADIO
TECHINCAL
Cameo Communications, Inc
No. 42, Min Chuan East Road, Section 6, Taipei 114, Taiwan
2412 to 2472 MHz
YES
Channels
Number
Separation
Output power
13
5MHz
802.11b: 78.01 mW (e.i.r.p.)
802.11g: 40.30 mW (e.i.r.p.)
Modulation
DBPSK / DQPSK / CCK / OFDM
Type of antenna
Patch
TCAM
Category
USAGE
Intended use
(if applicable)
THE ORDER
COMPRISES
Operating environment
Portability
RESIDENTIAL
PORTABLE
R&TTE Directive – Module Aa (Annex III) – Radio test suite assessment
(NB issues a radio test suite proposal)
R&TTE Directive – Module Aa+ (Annex IV) – TCF assessment
(NB issues an opinion based on examination of the technical construction file (TCF) presented by the applicant)
R&TTE Directive – Module H (Annex V) – Full quality assessment
(NB verifies the quality system and the requirements for periodic control of test suites)
Remarks:
OTHER
Similar applications have been submitted to other Notified Bodies (must be listed on separate letter)
Nemko is supposed to do assessments of the quality system
Nemko is supposed to do annual production surveillance
SUBMITTED
DOCUMENTS
Safety test report (3.1a)
Technical specifications
User documentation
MPE calculation (3.1a)
Principle diagrams
Service documentation
EMC test report (3.1b)
Block diagrams
ISO 9000 certificates
Radio test report (3.2)
Circuit diagrams
Quality manual
CEPT radio application
Part lists
Methods for periodic control
List of standards
Component lists
Declaration of Conformity
STANDARDS
APPLIED
Sample of the product
Art.3.1a
Art.3.1b
Art.3.2
EN60950-1: 2001
EN 301 489-1 V1.4.1
EN 301 489-17 V1.2.1
EN 300 328 V1.4.1
Art.3.3
REMARKS
This appendix supports the information given in the Nemko application form. The same conditions apply. The undersigned is authorized to sign on behalf of the applicant.
2005/4/27
Date
Cameo Communications, Inc
(Jason Chang / Wireless Comm. R&D Dept. Manager)
Binding on the applicant
Nemko's general terms of agreement for testing and certification of equipment
1.
GENERAL
3.
CERTIFICATION AND LICENSING
1.1
The terms of this agreement govern the relation between the party applying for
testing/evaluation and/or certification of equipment (the Applicant), the party
responsible for design, production and quality assurance of the equipment or
marks the equipment as its (the Manufacturer) and Nemko performing the
services.
3.1
GENERAL
3.1.1
Based on performed testing or other examination, Nemko certifies equipment
found to comply with current standard or other agreed specification, and which
otherwise is considered suitable for its purpose. Nemko also issues documentation
as a basis for certification in other countries in accordance with i.a. Nordic EMKO
agreement, European CCA agreement or international CB agreement (primary
orders). Correspondingly, Nemko issues national certificates, based on
documentation from other certification bodies according to the above mentioned
agreements (secondary orders).
3.1.2
As a basis for the application, the Applicant is to submit the material and
information found necessary by Nemko for issuing and maintainance of such a
certificate. Documentation in accordance with the EMKO-, CCA-, CB agreement
or equivalent, to be a basis for the certification by Nemko, must not exceed 3 years
of age.
3.1.3
Unless otherwise agreed upon, Nemko has the proprietary right to Nemko's own
original documents. These documents are filed by Nemko during their period of
validity, cfr. item 3.4.1.
3.2
FURTHER RIGHTS, RESPONSIBILITIES AND OBLIGATIONS
3.2.1
In connection with marketing, sales etc., the Manufacturer and the Applicant have
the right to inform that the products are certified by Nemko. The Manufacturer and
the Applicant are obliged to ensure that Nemko's name or certification mark are
affixed to the certified products in accordance with current instructions, and that
Nemko's name and certification mark are not misused.
3.2.2
Nemko's certificate, test report etc. does not exempt the Applicant, the
Manufacturer nor a third party for liability according to Norwegian or foreign
product liability legislation.
3.2.3
The certificate may be pleaded as documentation only for products that are
manufactured in total conformity with the certified design.
3.2.4
The Manufacturer is obliged to conform to the rules applying for Nemko's
production surveillance. If required by Nemko, representatives from Nemko or
from other bodies acting on Nemko's behalf, are given admittance to the
production sites, in order to ensure that the conditions associated with the
certificates issued by Nemko, are maintained. Nemko is entitled to invoice the
Manufacturer for the costs related to consumption of work hours, travel- and daily
allowances, in accordance with item 1.2.
3.2.5
In cases required by Nemko, the Applicant shall, free of all costs to Nemko,
provide a sample of the certified product for re-examination in order to ensure that
it remains in conformity with the certified design. The Applicant is obliged to pay
for Nemko’s costs in connection with such re-examination.
3.2.6
Nemko to be notified by the Manufacturer with regard to complaints covering the
equipment and possibly affecting the certificate.
3.2.7
The Manufacturer and the Applicant are obliged to conform to Nemko's possible
directions, as a consequence of the above items 3.2.4 - 3.2.6.
3.3
CHANGES TO THE PRODUCT
The manufacturer shall notify Nemko in writing of any proposed product
alteration. Nemko is to evaluate whether the certificate may be maintained or
whether the equipment has to be re-certified, if necessary after repeated testing.
3.4
DURATION, TERMINATION AND WITHDRAWAL
3.4.1
Rights and obligations according to these terms attaching to an issued certificate,
do no longer apply after expiry period of the certificate, i.e. maximum 10 years,
unless otherwise is stated in the certificate. (Not applicable to Ex-equipment).
3.4.2
If production and/or marketing of certified equipment should terminate, and
obligations according to the present terms should be required terminated, the
Manufacturer or the Applicant must immediately give Nemko a written request to
be released from the obligations. If Nemko agrees to the release, the rights of the
persons or companies concerned according to the certificate simultaneously shall
no longer apply.
1.1.1
If the order is to lead to certification, then part 1., 2. and 3. of these terms shall
apply. The Applicant to be the Manufacturer or a physical or juridical person
appointed by the Manufacturer.
Should the Applicant not be identical with the Manufacturer in such cases, the
order shall be carried out only if the Manufacturer, on a form set by Nemko
(Power of Attorny), declares that he is aware of and agrees that the Applicant
gives Nemko the task of carrying out the certification of the equipment in
question and that he accepts the obligations that these terms impose on the
Manufacturer. (items 1.2, 3.2.1, 3.2.4, 3.2.6, 3.2.7, 3.3, 3.4.2).
1.1.2
If the order is to lead to issuing of a test report or another document only
giving statement concerning the tested sample, part 1., 2. of these terms shall
apply. Nemko is carrying such orders regardless of who the Applicant is, and
shall in this connection solely cooperate with the Applicant concerned.
The general terms are as follows:
1.2
The Applicant is obliged to pay Nemko for the performing of the agreed order
in accordance with the at all times current Nemko prices. For certificates this
also includes payment of an annual licence fee for the right to use the
certificate and for the right to use Nemko's name or certification mark. The
Applicant is obliged to pay for for the work performed with the purpose of
issuing a certificate, even if such document cannot be issued, whether being
due to the tested sample, the Manufacturer or the Applicant.
Regarding orders which are to result in issuing of a certificate, Nemko may
permit that the obligation to pay totally or partly is transferred from the
Applicant to the Manufacturer, provided this is satisfactory documented
towards Nemko.
Payment to take place in accordance with invoices and their terms of payment.
Nemko may require payment in advance. I such case the balance will be
settled upon completion of the order. Other terms of delivery will be as
described in connection with confirmation for the individual order.
1.3
The Nemko staff is bound to observe professional secrecy, not disclosing any
confidential information received in connection with the order. According to
Norwegian law, the professional secrecy may be set aside in case of lawsuit in
Norwegian Court. Nemko is also obliged to ensure that other co-operating
bodies that might deal with the order, instruct their staff to observe the
equivalent professional secrecy.
1.4
Nemko's decision may be appealed to Nemko's Appeal Committee, which
deals with the appeal in accordance with Nemko's appeal procedure. An appeal
in writing must be received by Nemko within 3 weeks from the time the
Applicant has received Nemko's written decision.
Any dispute that might occur regarding these terms, one should primarily try
to resolve by negotiations between the parties. If this fail to succeed, the
dispute should be decided by the ordinary courts, unless the parties agree to
arbitration. Any dispute to be settled in accordance with Norwegian law. Legal
venue is City of Oslo Stipendiary Magistrate's Court.
1.5
Nemko's Board has at any time the right to revise the present terms.
Alterations of the terms are only applicable for orders commenced 3 - three weeks after Nemko's Board having approved the alterations concerned.
1.6
The rights to a certificate devolve on the Manufacturer, provided that the
Applicant does not produce evidence that it is agreed with the Manufacturer
that such rights are to pass to the Applicant.
The rights to a test report or any other document concerning the tested sample
only, devolve on the Applicant.
1.7
1.8
1.9
2.
2.1
2.2
2.3
Nemko has no liability for errors made in connection with the performance of
the order except for errors due to purpose or gross negligence on Nemko's
side. Nor has Nemko any liability for indirect losses, cfr. Norwegian Sale of
Goods Act § 67 (2).
The present terms are binding on the Applicant as from the moment he has
signed the Application form,and when appliable, for the Manufacturer when a
Power of Attorny as mentioned under item 1.1.1 is signed.
3.4.3
These terms are issued in an English and a Norwegian version. In case of
differencies in the wording, the Norwegian version shall apply and the
Norwegian version will supersede the English version.
TESTING/EVALUATION
Nemko carries out testing/evaluation of equipment according to valid standard
or other agreed specification. Nemko reserves the right, in exceptional cases,
to subcontract parts of the testing to an other competent laboratory.
3.5
As a basis for the testing, the Applicant is to submit, free of all costs to
Nemko, test sample(s), installation and user’s instruction, other technical
documentation, extra components etc. to the extent found necessary by Nemko
for the order in question.
Nemko undertakes no responsibility whatsoever for damages that might occur
to the test sample(s) during testing, storage or transport. As deemed necessary,
the Applicant himself is to provide for insurance covering all submitted
material, cfr. item 2.2. Test samples not collected within 4 - four - weeks from
Nemko dispatching a Return Notice will be discarded. The same applies if
none of the boxes of the Application Form for "Test sample(s) after
examination" are ticked off.
3.6
Nemko may withdraw the certificate if the Manufacturer or the Applicant do not
fulfil their obligations in accordance with the present terms. Notice of withdrawal
is to be sent in writing, stating the reason for the withdrawal and the appointed
time of conclusion. Withdrawal of a certificate will normally take effect between 1
and 6 months upon Nemko's dispatch of their notice of withdrawal. In case of
fundamental breach, the withdrawal may have immediate effect. If a certificate
should be withdrawn, each and every right in accordance with the certificate and
the present terms shall no longer apply, hereunder the right to use Nemko's name
and certification mark.
TRANSFER OF CERTIFICATE
The certificate may only be transferred when it is documented towards Nemko that
the present and future owner of the certificate agree to that. The product may,
however, be re-certified under a different company name, as long as documentation
is produced showing that the holder of the certificate permits this. Should the
Manufacturer in such cases approve a new Applicant, a new Power of Attorny as
mentiond under item 1.1.1 above must be submitted. Agreements made between
the former Applicant(s) and the Manufacturer is outside the concern of Nemko.
MAINTENANCE OF CERTIFICATE
For maintenance of the certificate, hereunder the use of Nemko's name or
certification mark on certified products and in connection with marketing and
sales, an annual fee per each certified type/model shall be paid, according to item
1.2. In case of termination or withdrawal of a certificate, the annual fee will not be
refunded.
R&TTE
Technical Construction File
Product description:
802.11g Wireless PC Card
Application:
CAMEO COMMUNICATIONS, INC.
Manufacture:
CAMEO COMMUNICATIONS, INC.
Brand and Type/model number:
Brand Name
Model Name
CAMEO
WLG-1103
Level One
WPC-0300
LG
LWS5410N
Etherwan
NWP-0208-G
Allnet GmbH
ALL0282A
Technical Construction file in accordance with R&TTE Annex IV
Under the provisions if Annex IV point 4 of the R&TTE directive 1999/5/EC of the European Parliament
and of the council of 9 March on Radio equipment and Telecommunications Terminal Equipment
(R&TTE directive) and the mutual recognition of their conformity,
We, the undersigned,
Company
Address, City
Country
Phone number
Fax number
E-mail
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6, Taipei 114,
Taiwan
886-2-27908998
886-2-27909463
Jason_Chang@mail.cameo.com.tw
Have established a Technical Construction File as specified below to be presented to the Notified Body
for his opinion and to be kept available to the relevant national authorities of any Member State for
inspection purpose:
Item number
01
02
Technical Document description
Technical File in accordance with R&TTE directive Annex II point 4
Declaration of conformity to specific test suites described in R&TTE directive Annex III
For the following product:
Product Description / Supplementary Info
Manufacturer
Brand
Type
802.11g Wireless PC Card
CAMEO COMMUNICATIONS, INC.
CAMEO, Level One, LG, Etherwan, Allnet GmbH
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A
The Technical Construction File as specified above will be kept for a period ending at least 10 years
after the last product has been manufactured at the disposal of the relevant national authorities of any
Member State for inspection purpose,
Draw up in
Date
TAIWAN, R.O.C.
2005/4/27
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Signature & company stamp
Jason Chang /
Wireless Comm. R&D Dept. Manager
Technical Construction file in accordance with R&TTE Annex II Point 4
Under the provisions if Annex II point 4 of the R&TTE directive 1999/5/EC of the European Parliament
and of the council of 9 March on Radio equipment and Telecommunications Terminal Equipment
(R&TTE directive) and the mutual recognition of their conformity,
We, the undersigned,
Company
Address, City
Country
Phone number
Fax number
E-mail
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6, Taipei 114,
Taiwan
886-2-27908998
886-2-27909463
Jason_Chang@mail.cameo.com.tw
Have established a Technical Construction File as specified below to enable assessment of the product
conformity with the essential requirements of the R&TTE directive:
Item number
01
02a
02b
02c
02d
02e
02f
03a
03b
04
05
06
07
Technical Document description
Block diagram
Circuit diagram
PCB layout
Part list
Exterior photographs
Interior photographs
Label information
Technical description
User manual
R&TTE standard list
RF-EMC-LVD test report and corresponding annexes
Copy of the R&TTE Declaration of Conformity (DOC)
Product Quality Assurance documents
For the following product:
Product Description / Supplementary Info
Manufacturer
Brand
Type
802.11g Wireless PC Card
CAMEO COMMUNICATIONS, INC.
CAMEO, Level One, LG, Etherwan, Allnet GmbH
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A
The Technical File as specified above will be kept for a period ending at least 10 years after the last
product has been manufactured at the disposal of the relevant national authorities of any Member State
for inspection purpose,
Draw up in
Date
TAIWAN, R.O.C.
2005/4/27
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Signature & company stamp
Jason Chang /
Wireless Comm. R&D Dept. Manager
Block Diagram
EEPROM
LEDS
CARDBUS CONNECTOR
BPF
AR2414A-00
PA
COUPLER
PDET
BPF
LPF
ANTA
LPF
ANTB
SWITCH
XLNA
40MHZ
XTAL
PA : PA 2409
BPF : BAND PASS FILTER
PDET : POWER DETECTOR
LPF : LOW PASS FILTER
ANTA : ANTENNA A
ANTB : ANTENNA B
XLNA : EXTERNAL LOW NOISE AMPLIFIER
CAMEO
Product Name
WLG-1103 [Atheros super g cardbus]
Size
C
Function Description
AR2414A+PA2409
Date:
Friday, January 14, 2005
Rev
0
Sheet
1
of
5
EEPROM
LEDS
CARDBUS CONNECTOR
BPF
AR2414A-00
OPB
COUPLER
PDET
BPF
LPF
ANTA
LPF
ANTB
SWITCH
XLNA
40MHZ
XTAL
OPB : OUTPUT POWER BOOSTER
BPF : BAND PASS FILTER
PDET : POWER DETECTOR
LPF : LOW PASS FILTER
ANTA : ANTENNA A
ANTB : ANTENNA B
XLNA : EXTERNAL LOW NOISE AMPLIFIER
Circuit Diagram
5
4
3
2
3.3V
1
1.8V
VR3
10V
0.1uF
C141
C
1
16V
C1
4.7uF
D
R42
0.1uF
10V
C50
10V
C49
1.8V_A
1000pF
1.8V
C51
3.3V_A
1uF
2.2uF
R41
10V
10pF
10pF
C48
10pF
C59
C58
C68
C69
1000pF
1000pF
10pF
C57
C67
1000pF
C56
25V
25V
0.01uF
C55
0.01uF
C54
0.1uF
10V
C53
0.1uF
10V
3.3V
0
C52
3
3.3V_A
1000pF
C66
25V
0.01uF
C65
25V
0.01uF
C64
0.1uF
10V
10V
C63
1.8V_A
0.1uF
1.8V
C62
OUT
0
3.3V
IN
C140
2
D
GND
VR
C
C
U1H
3.3V
U1F
1.8V
B2
C3
D4
D6
E5
E6
E7
E8
F4
F5
F6
F7
F8
G5
G6
G7
G8
H5
H6
H7
J5
J6
J7
J8
J9
U1E
TOOLING
HOLES
X33 1
X39
B
X99
X14
X28
GND
GND
GND
GND
GND
GND
X31
1
X32
1
1
X572
1
X524
X336
1
X502
X29
1
X30
1
X10
1
X9
1
X11
1
X8
1
1
X597
1
1
X548
1
X518
1
X602
1
1
X545
1
X594
1
X562
1
X563
1
X527
1
X538
1
X578
1
X600
1
1
X601
1
X598
1
X526
1
X568
1
X564
1
X536
1
X575
1
X546
1
X557
1
X573
1
X555
1
1
X588
1
X558
X577
1
1
X561
X603
1
X342
1
X547
1
1
1
X596
1
1
X582
X535
1
X339
1
1
X571
1
X586
X595
1
X589
1
X333
1
X585
1
1
X583
1
X593
X517
1
X332
1
X599
1
X519
1
X329
X591
1
X590
1
X569
1
X327
1
X503
1
X570
1
1
X338
1
X579
1
X335
1
X565
1
X556
1
X605
1
X504
1
X581
1
X574
1
X576
1
X525
1
X607
1
X537
1
X516
1
X584
1
X606
1
X587
1
X505
1
X580
1
X604
1
X330
1
X592
1
X341
1
FD1
1 FD500
1
FD2
1 FD501
1
FD3
1 FD502
1
FD4
1
TOOLING HOLES
LOGO
X7
1
X12
X614
1
1
X615
1
X13
1
X616
1
X608
1
X617
1
X609
1
X618
1
ZH1
1
X610
1
X619
1
X1
1
ZH500
1
X611
1
X620
1
X2
1
ZH501
1
X612
1
X621
1
ZH502
1
X613
1
X622
1
ZH503
1
5
VDD18
VDD18
VDD18
VDD18
VDD18
VDD18
VDD18
VDD18
D5
D8
E4
H4
L4
L12
M5
M8
M11
N5
N11
VDD33
VDD33
VDD33
VDD33
VDD33
VDD33
VDD33
VDD33
VDD33
VDD33
VDD33
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
3.3V_A
J10
J11
K4
K5
K6
K7
K8
K9
K10
K11
K12
L5
L6
L7
L8
L9
L10
L11
M4
M6
M10
M12
N3
N13
P2
1.8V_A
U1G
AR2414A-00 Digital VDD
B8
B9
B15
C7
D9
D13
F15
G12
H14
AVDD
AVDD
AVDD
AVDD
AVDD
AVDD
AVDD
AVDD
AVDD
C10
C12
D11
D15
E12
E13
H12
H15
AVDD33
AVDD33
AVDD33
AVDD33
AVDD33
AVDD33
AVDD33
AVDD33
AR2414A-00 Analog VDD
A11
A14
A15
B7
B10
B11
B12
B13
B14
C13
D10
D12
D14
E9
E10
E11
F9
F10
F11
F12
F14
G9
G10
G11
H9
H10
H11
H13
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
B
AR2414A-00 Digital Ground
AR2414A-00 Analog Ground
BREAKAWAYS
X441
PCB_CB
1
A
1
X22
X560
FIDUCIALS
OPTIONAL SHIELD
HOLES
X21
X326
CB51 SHIELD
1
2
3
4
5
6
1
PANEL PERFORATIONS
D7
G3
G4
J3
J4
J12
M7
M9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
4
Tie ground
planes
together.
A
3
2
1
5
4
3
2
1
S1 SHORTED AS THE DEFAULT.
CUT THE TRACE TO TEST AT
THE CONNECTOR.
2 ANTA
3.3V_A
3
4
NC
W6 L600
W6 L600
C144
0.1uF
C60
C16
NC
S2
2
3
REF
DET
GND
8
9
17
4
1
2
4
1
W6 L600
47
U6
W6 L600
SMP1345-518
4-PIN-COUPLER
W=20
S=5
L=180
R27
NC
NC
NC
1
13
15
1.5pF
3
VB1
VB2
VB3
P1
220
10pF
1% C31
R34
220
1%
R33
R35
P_DET 3
C
F4
R36
MM8430-2600
C34
47pF
1pF C35
S3
1
ANTIN ANTOUT
ANT 1
2
1
P2
L2
GND
GND
2ANT1_CON
O
GND
GND
I
3.3nH
L6
3.3nH
3
4
1
5
6
R
10pF
C32
100K
R28
ALTERNATIVE PA :
EPICOM PA2409 SEE APP. NOTE
L5
47pF
2
SMS7630-996
3.9nH
C33
D1
1
5.1K
150
3.9nH
R32
XBIAS
C
C30
OPT 3
L4
10pF
R29
100K
R31
82
180
R30
C
C25
F2
47pF
11
10
C26
GND
3pF
C28
C
GND
W10 L70
W10 L30
VCC
VC1
VC2
VC3
5
16
14
12
25V
NC
NC
C19
NC
C18
C17
3pF
C142
6
3
2
1
3pF
C27
GND
3 XBIAS
C145
10pF
RF IN RF OUT
RF IN RF OUT
C
C24
C
C29
4
6
7
C20
W10 L120
D
1
3.3nH
OUT
GP1214
ANT 2
1pF
L3
IN
2
3
10pF
C14
2
ANTIN ANTOUT
GND
GND
C11
L1
3 RFOUT_P
10pF
5
1
3.3nH
C23
PRINTED BPF
4
1
I
L14
F3
10pF C22
NC
C21
1.5pF
1nH
O
GND
GND
C15
L16
S1
2
10pF
OUTPUT MATCHING
MM8430-2600-NO STUFF
47pF
5
6
220
1%
R24
220
1nH
R46
10
PRINTED TRANSMIT
COMBLINE FILTER
D
1%
R26
R25
10V
1uF
C12
ANT2_CON
F1
C13
2 ANTB
R37
2 ANTC
220pF
C36
56
B
B
3.3pF
INPUT MATCHING
6
C
C42
1nH
10pF
RFIN 3
C
C45
3.3pF
GND
L15
4
GND
1
3
3.3pF
C43
Q3
IN
L
3
1
GND
OUT
L10
10pF
F5
PRINTED BPF
5
2
10pF
C44
C41
L8
18nH
2
1
C38
L7
18nH
2
10pF
C37
R39
C40
120pF
C39
47
10pF
15K
R38
PRINTED RECEIVE
COMBLINE FILTER
SGA-8343
1
C
C47
4
2
C46
A
A
5
4
3
2
1
5
4
3
2
1
D
D
RFOUT_P
4
C8
1.5pF
XBIAS
3.3V_A
1
0
IDDQ
BIASREF
F13
J15
XTALI
XTALO
J14
1
R16
VREG_COMP
VREG_OUT
C
Q2
2SB1132
3
BIASREF
R19
XTALO
1.8V_A
3
10V
C7
Y
0.1uF
XY1
1
C6
AR2414A-00 Radio Interface
10V
390
J13
G13
C11
R20
XTALI
VREG_COMP
VREG_OUT
PUT TP15
ON TOP LAYER
TP15
1
C5
R
TX2
C2
2.2uF
C4
10pF
R23
XBIAS
C15
C14
R21
2
5
6
3.3V_A
C147
ATBP
ATBN
A10
A7
1
ADC_DAC_IP
ADC_DAC_IN
ADC_DAC_QP
ADC_DAC_QN
2.2pF
RFOUT_P
RFOUT_N
A9
A8
2
G15
G14
E14
E15
2.2pF
4
RFOUTP
RFOUTN
RFOUTP_BIAS
RFOUTN_BIAS
43K
RFINP
RFINN
R17
A13
A12
C3
R R45
C146
C2
PDETP
PDETN
120pF
C9
C8
6.19K
1%
0
3
P_DET
2.2pF
1
R49
BALU N
P_DET
OPT
R18
RFIN
0
R48
4
F6
4
4
10pF
1
1
1
L12
2.7nH
L11
2.7nH
U1D
C
4
3.3V_A
TP18
0
TP16
47
1.8V_A
TP19
R22
1.8V_A
TP17
Y1
40.000MHZ
3
BIASREF
15pF
C10
C9
22pF
1
VREG
B
B
XTAL
A
A
5
4
3
2
1
5
4
3
2
1
J1
RFU1
RFU2
RFU3
40
32
47
CCD1
CCD2
36
67
/CCD1
/CCD2
CVS1
CVS2
43
57
CVS2
VPP1
VPP2
18
52
Q1
2
R1
IDSEL
3
1
B
PCI_INT_L
PCI_REQ_L
PCI_GNT_L
PCI_PERR_L
PCI_PAR
PCI_IRDY_L
PCI_TRDY_L
PCI_FRAME_L
PCI_STOP_L
PCI_SERR_L
PCI_DEVSEL_L
IDSEL
PCI_INT_L
PCI_REQ_L
PCI_GNT_L
PCI_PERR_L
PCI_PAR
PCI_IRDY_L
PCI_TRDY_L
PCI_FRAME_L
PCI_STOP_L
PCI_SERR_L
PCI_DEVSEL_L
IDSEL
K1
L1
L2
R10
R6
P8
N9
R8
N10
P9
P10
R4
N1
PCI_INT_L
PCI_REQ_L
PCI_GNT_L
PCI_PERR_L
PCI_PAR
PCI_IRDY_L
PCI_TRDY_L
PCI_FRAME_L
PCI_STOP_L
PCI_SERR_L
PCI_DEVSEL_L
PCI_IDSEL
PCI_PME_L
820
8
2
VCC
10K
GREEN
R14
1
1
DS2
DS1
GREEN
2
R
16
60
15
14
13
20
53
54
49
59
50
48
U0_CTS_L
U0_CLK
U0_SIN
EPRM_SCK
EPRM_SDA
ANTD
ANTB
ANTA
R15
CINT
CREQ
CGNT
CPERR
CPAR
CIRDY
CTRDY
CFRAME
CSTOP
CSERR
CDEVSEL
CBLOCK
C
TP1 TP2 TP3 TP4 TP5
=
=
=
=
=
=
=
=
PUT TP12 ON TOP LAYER
TP6 TP7 TP8 TP9
TP10 TP11 TP12 TP13 TP14
U1C
A6
B6
POR_EN
POR_L
RX_FRAME
TX_FRAME
K2
F3
C6
F2D2EN
RX_CLEAR
R2
CLKOBS
E3
SLEEP
B3
K15
PLLBYPASS
K13
BT_ACTIVE
P14
RFTEST
1
PCI_CBE0_L
PCI_CBE1_L
PCI_CBE2_L
PCI_CBE3_L
5
KEEP CLOSE TOGETHER
RFDATAIN_3
RFDATAIN_2
RFDATAIN_1
RFDATAIN_0
RFDATAOUT
RFSHIFT
RFLOAD
RFRST_L
1
P15
R11
R7
R3
WC
SDA
AR2414A-00 EJTAG, GPIO, UART, EPRM, ANT
1
PCI_CBE0_L
PCI_CBE1_L
PCI_CBE2_L
PCI_CBE3_L
7
M24C32WMN6
ANTC 4
ANTB 4
ANTA 4
1
PCI_CBE0_L
PCI_CBE1_L
PCI_CBE2_L
PCI_CBE3_L
SCL
ANTC
ANTB
ANTA
1
7
12
21
61
A4
A5
B4
B5
6
U3
1
CCBE0
CCBE1
CCBE2
CCBE3
ANTD
ANTC
ANTB
ANTA
1
PCI_AD0
PCI_AD1
PCI_AD2
PCI_AD3
PCI_AD4
PCI_AD5
PCI_AD6
PCI_AD7
PCI_AD8
PCI_AD9
PCI_AD10
PCI_AD11
PCI_AD12
PCI_AD13
PCI_AD14
PCI_AD15
PCI_AD16
PCI_AD17
PCI_AD18
PCI_AD19
PCI_AD20
PCI_AD21
PCI_AD22
PCI_AD23
PCI_AD24
PCI_AD25
PCI_AD26
PCI_AD27
PCI_AD28
PCI_AD29
PCI_AD30
PCI_AD31
EPRM_SCK
EPRM_SDA
EPRM_EN_L
1
L14
L15
L13
M15
M13
M14
N15
N14
R15
R14
P13
R13
P12
R12
P11
N12
N8
P7
N7
P6
N6
P5
R5
P4
N4
P1
P3
N2
R1
M2
M3
M1
E0
E1
E2
R13
1
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
AD11
AD12
AD13
AD14
AD15
AD16
AD17
AD18
AD19
AD20
AD21
AD22
AD23
AD24
AD25
AD26
AD27
AD28
AD29
AD30
AD31
R
1
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
AD11
AD12
AD13
AD14
AD15
AD16
AD17
AD18
AD19
AD20
AD21
AD22
AD23
AD24
AD25
AD26
AD27
AD28
AD29
AD30
AD31
R10
1
2
3
1
CAD0
CAD1
CAD2
CAD3
CAD4
CAD5
CAD6
CAD7
CAD8
CAD9
CAD10
CAD11
CAD12
CAD13
CAD14
CAD15
CAD16
CAD17
CAD18
CAD19
CAD20
CAD21
CAD22
CAD23
CAD24
CAD25
CAD26
CAD27
CAD28
CAD29
CAD30
CAD31
2
3
37
4
38
5
39
6
41
8
42
9
10
44
11
45
46
55
22
56
23
24
25
26
27
28
29
30
64
31
65
66
D1
D2
D3
R9
R
1
58
19
33
H3
H2
J2
J1
H1
R8
390
VSS
PCI_MODE
PCI_RST_L
PCI_CLK
PCI_CLKRUN_L
CRST
CCLK
CCLKRUN
U0_SOUT
U0_RTS_L
U0_CTS_L
U0_CLK
U0_SIN
LED_1
G1
G2
F1
F2
E1
E2
1
PCI_RST_L
PCI_CLK
PCI_CLKRUN_L
K14
L3
K3
R9
3.3V
R
4
U1A
PCI_MODE
PCI_RST_L
PCI_CLK
PCI_CLKRUN_L
C5
C4
R11
R
R6
R5
R4
R12
TCLK
LED_0
TDI
LED_1
TDO
TMS
GPIO_0
TRST_L GPIO_1
GPIO_2
GPIO_3
GPIO_4
GPIO_5
1
R3
3.3V
10K
10K
10K
C1
A3
A2
A1
B1
10K
R
3.3V
3.3V
3.3V
R7
0
3.3V
R40
0
3.3V
17
51
LED_0
U1B
PCI_MODE
C
EEPROM
3.3V
R2
3.3V
VCC
VCC
D
0
D
2N7002
PC814-6830
B
AR2414A-00 PCI Interface
AR2414A-00 Digital Interface
CAUDIO
CSTSCHG
A
62
63
GND
1
GND
34
GND
35
GND
68
CHGND
CHGND
CHGND
CHGND
CHGND
CHGND
CHGND
CHGND
69
70
71
72
73
74
75
76
A
CARDBUS 68 + 8
5
4
3
2
1
PCB Layout
Bill of Materials (Part List)
Item Quantity
Reference Designator
Description
Footprint
1
1
C1
4.7uF,X5R, 16V
C1206
1102475Z4532**4
2
2
120pF,NPO, 50V
C0402
1108121J2*216**
3
21
10pF,NPO, 50V
C0402
110810PJ2*216**
4
2
C39, C2
C3, C4, C11, C14, C15, C22, C30,
C31, C32, C35, C37, C40, C41,
C42, C46, C58, C59, C68, C69,
C20 C23
C48
2.2uF,X5R, 10V
C0805
1102225Z4433***
5
8
C6, C50, C52, C53, C62, C63,
C141, C16
0.1uF,X5R, 10V
C0402
1108104Z2*233**
6
3
C7, C146, C147
2.2pF,NPO, 50V
C0402
11082P2C2*216**
7
3
C21, C8, C26
1.5pF,NPO, 50V
C0402
11081P5C2*216**
8
1
C9
22pF,NPO, 50V
C0402
110822PJ2*216**
9
1
C10
15pF,NPO, 50V
C0402
110815PJ2*216**
10
2
C49, C12
1uF,X5R, 10V
C0603
1102105Z4332***
11
4
C13, C33, C34, C145
47pF,NPO, 50V
C0402
110847PJ2*216**
12
4
C54, C55, C64, C65
10nF,X7R, 25V
C0402
1108103Z2*223**
13
6
C27, C28, C38, C43, C44, C142
3pF,NPO, 50V
C0402
11083P042*216**
14
1
C36
220pF,X7R, 50V
C0402
1108221K2*226**
15
5
C51, C56, C57, C66, C67
1nF,X7R, 50V
C0402
1108102K2*226**
16
2
DS2, DS1
LED GREEN SMD LED0805
17
1
D1
18
1
J1
19
2
L4, L5
SMS7630_SCHO
SC-79
TTKY
DETECTOR
CON,SMD,68pin,C
ardbus Connector
L0402
3.9nH,+/- 0.1nH
20
2
L8, L7
18nH,+/- 5%
L0402
110818NJ1******
21
2
L12, L11
2.7nH,+/- 0.1nH
L0402
11082N711******
23
3
L15, R46, L16
L0402
11081N011******
24
1
Q1
SOT-23
11042N7002*34**
25
1
Q2
SOT-89
11042SB113225**
26
1
Q3
1nH,+/- 0.1nH
2N7002_60V NCH. FET_ 7.5
2SB1132, SOT89, PNP
SGA8343,
LNA,2.4GHz
SOT-343
1104SG8343AJ***
27
1
R30
180 OHMS
R0402
11011800F521***
28
1
R40
R0402
11018200J521***
29
1
R38
R0402
11011502J521***
30
6
R1, R2, R13, R18, R48, R49
R0402
11010000J521***
31
5
R4, R5, R6, R11, R14
R0402
11011002J521***
32
2
R8, R20
820 OHMS
15K OHMS, +/5%, 1/16W
0 OHMS, +/- 5%,
1/16W
10K OHMS, +/5%, 1/16 W
390 OHMS,+/- 5%,
1/16 W
R0402
11013900J521***
11061*141300001
1105SM763029MF*
1141192*344*0*0
11083N911******
34
1
R17
35
3
R19, R41, R42
36
1
R21
37
3
R22, R27, R39
38
4
R24, R26, R33, R34
39
1
R25
40
2
R28, R29
41
1
R31
42
1
R32
43
1
R36
44
1
R37
45
1
X99
46
1
S2
47
1
U1
48
1
U3
49
1
U6
43K OHMS,+/5%, 1/16 W
0 OHMS, +/- 5%,
1/8W
6.19K OHMS, +/1%, 1/16 W
47 OHMS, +/- 5%,
1/16 W
220 OHMS, +/1%, 1/16W
10 OHMS, +/- 5%,
1/16W
100K OHMS, +/5%, 1/16W
82.5 OHMS, +/1%, 1/16W
150 OHMS, +/1%, 1/16W
5.1K OHMS, +/5%, 1/16 W
56 OHMS, +/- 5%,
1/16W
RF Shield for
CB51
SMP1345,SWITC
HING PIN DIODE
AR2414A,BGA
224,AnalogAndDig
ital
24C32,SO8,Serial
32Kbit EEPROM
Epicom,PA2409
51
1
Y1
XTAL,SMD,40MH
z,4pin,+/18PPM_LEADLES
S CRYSTAL
(CL=15pF)
52
1
C5
10uF
53
1
PCB
R0402
11014302J521***
R0805
11010000J542***
R0402
11016191F521***
R0402
11010470J521***
R0402
11012200F521***
R0402
11010100J521***
R0402
11011003J521***
R0402
110182R5F521***
R0402
11011500F521***
R0402
11015101J521***
R0402
11010560J521***
151104040200200
SWI-4P-LGA 1105SM13457A4K*
BGA-224
1111AR2414A00**
SO8
11143M24C32*32*
1111PA2409*****
110704000071811
C0805
1102106Z*433***
11514WLG11031A1
Exterior and Interior Photographs
External Photos of 802.11g Wireless PC Card --------------------------------------- 1/5
Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
External Photos of 802.11g Wireless PC Card --------------------------------------- 2/5
Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Internal Photos of 802.11g Wireless PC Card ---------------------------------------- 3/5
Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Internal Photos of 802.11g Wireless PC Card ---------------------------------------- 4/5
Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Internal Photos of 802.11g Wireless PC Card ---------------------------------------- 5/5
Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Label Information
X
CAMEO
9500WLG11030XAV
WLG-1103
Grace Chen Grace Chen
AV
51.00 mm
MODEL : WLG-1103
Q'TY:
0470
25.00 mm
WLG-1103 Rev.AV
60 PCS
802.11g WLAN
Card Bus Adapter
FCC ID: NHPWLG1103
"See Caution in Manual"
S/N:
(
)
Made in XXXXXX
FROM
US Patent Nos.
4,603,320 ; 4,686,506;
4,972,470 ; 4,543,450
S/N:
(
)
TO
(
)
35.00 mm
WLG-1103
0470
0470
FCC ID: NHPWLG1103
"See Caution in Manual"
S/N:
(
)
12.00 mm
CARTON OF NO.
/
34.00 mm
MADE IN xxxxxx
MAC:
(
)
6.00 mm
000000000000
35.00 mm
"MADE IN TAIWAN"
"MADE IN CHINA"
30.00 mm
94.4.06
F1 PCB
Technical Description
Technical Specifications
General
Radio Technology
IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)
IEEE 802.11g Orthogonal Frequency Division Multiplexing
(OFDM)
Interface
CardBus Type II specification 32bit data bus
Data Transfer Rate
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps (auto sense)
Receiver Sensitivity
54Mbps: Typical -73dBm @ 10% PER (Packet Error Rate)
11Mbps: Typical -85dBm @ 8% PER (Packet Error Rate)
Transmit Rate
802.11g: 14dBm typically
802.11b: 17dBm typically
Frequency Range
2412 ~ 2484 MHz ISM band (channels 1 ~ 14)
Modulation Schemes
DBPSK/DQPSK/CCK/OFDM
Channels
1~11 channels (FCC), 1~13 channels (ETSI),
1~14 channels (MKK-Japan)
Media Access Protocol
CSMA/CA with ACK
Security
64/128-bits WEP Encryption, WPA
Diagnostic LED
PWR (Power) & LNK (Link status)
Antenna
Integrated Microstrip dual diversity antennas
Physical and Environmental
Driver Support
Continuous
Consumption
Windows 98SE, Windows 2000, Windows ME, Windows XP
Current
250mA typ. for receive mode, 350mA typ. for transmit mode
Temperature
Operating: 0° ~ 40° C, Storage: -10° ~ 70° C
Humidity
10% ~ 95% RH, no condensation
Dimensions
118 x 54 x 7 mm (W x H x D)
Certifications
FCC Part 15.247 for US, ETS 300 328 for Europe,
User Manual
IEEE 802.11g
CardBus Adapter
User’s Guide
Regulatory notes and statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices.
The energy levels of these emissions however are far much less than the
electromagnetic energy emissions from wireless devices like for example mobile
phones. Wireless LAN devices are safe for use frequency safety standards and
recommendations. The use of Wireless LAN devices may be restricted in some
situations or environments for example:
·On board of airplanes, or
·In an explosive environment, or
·In case the interference risk to other devices or services is perceived or identified
as harmful
In case the policy regarding the use of Wireless LAN devices in specific
organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial
plants, private buildings etc.) is not clear, please ask for authorization to use these
devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with
the instructions included in the user documentation provided with the product. Any
changes or modifications made to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate the equipment. The
Manufacturer is not responsible for any radio or television interference caused by
unauthorized modification of this device, of the substitution or attachment.
Manufacturer and its authorized resellers or distributors will assume no liability for
any damage or violation of government regulations arising from failing to comply
with these guidelines.
USA-FCC (Federal Communications Commission) statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of this device.
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65
and found compliant to the requirements as set forth in CFR 47 Sections 2.1091,
2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices.
i
The radiated output power of this Wireless LAN device is far below the FCC radio
frequency exposure limits. Nevertheless, this device shall be used in such a manner
that the potential for human contact during normal operation is minimized.
When nearby persons has to be kept to ensure RF exposure compliance, in order to
comply with RF exposure limits established in the ANSI C95.1 standards, the
distance between the antennas and the user should not be less than 2.5cm.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Export restrictions
This product or software contains encryption code that may not be exported or
transferred from the US of Canada without an approved US Department of
Commerce export license.
Safety Information
Your device contains a low power transmitter. When device is transmitted it sends
out radio frequency (RF) signal.
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with minimum distance 2.5cm between
the radiator and your body. Use on the supplied antenna. Unauthorized antenna,
modification, or attachments could damage the transmitter and may violate FCC
regulations.
ii
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 2.5cm from all persons and must not be co -located or operating
in conjunction with any other antenna or transmitter.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Protection requirements for health and safety – Article 3.1a
Testing for electric safety according to EN60950-1 has been conducted. These are
considered relevant and sufficient.
Protection requirements for electromagnetic compatibility – Article
3.1b
Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 48917 and EN 55024 has been conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 328 has been conducted. These
are considered relevant and sufficient.
CE in which Countries where the product may be used freely:
Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland,
Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.
France: except the channel 10 through 13, law prohibits the use of other channels.
iii
TABLE OF CONTENT
Introduction .........................................................................................1
Overview of this User’s Guide ..........................................................1
Unpacking and Setup...........................................................................2
Unpacking..........................................................................................2
Setup ..................................................................................................2
Hardware Installation ..........................................................................3
LED Indicator....................................................................................3
Check the installation ........................................................................3
Software Installation............................................................................4
Windows 98se/ME/2000/XP Utility and Driver Installation ............4
Wireless Utility Setting .....................................................................5
iv
INTRODUCTION
Congratulations on your purchase of this 108Mbps IEEE 802.11g Wireless Cardbus
Adapter.
This manual helps to get familiar with the Wireless Cardbus Adapter. This manual
contains detailed instructions in operation of this product. Please keep this manual
for future reference.
With a Wireless (IEEE 802.11g) Cardbus Adapter, a laptop computer or a station
can communicate with another computer in a wireless way. Easy-to-use utilities are
bundled with Wireless Cardbus Adapter for configuration, monitoring, and
diagnosis purposes.
Wireless Cardbus Adapter can wirelessly transmit and receive data, minimizing the
need for wired connections, at a speed of up to fifty-four megabit per second. With
Wireless Cardbus Adapter, you can locate your Notebook PC or station wherever
you want without wires and cables.
Wireless Cardbus Adapter provides users with an access to real-time information
anywhere in their organization. The mobility provides productivity and service,
which are not available under wired networks. The Wireless Cardbus Adapter
configuration is easy to change from peer-to-peer networks, suitable for a small
number of users, to full infrastructure networks of thousands of users that allow
roaming around a broad area.
Overview of this User’s Guide
Introduction. Describes the Wireless Cardbus Adapter.
Unpacking and Setup. Helps you get started with the basic installation of the
Wireless Cardbus Adapter.
Hardware Installation. Describes the LED indicators of the Adapter.
Software Installation. Tells how to setup the driver and the utility setting.
Technical Specifications. Lists the technical (general, physical and environmental)
specifications of the Wireless Cardbus Adapter
1
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Wireless Cardbus
Adapter.
Unpacking
Open the box of the Wireless Cardbus Adapter and carefully unpack it. The box
should contain the following items:
u
u
One 108Mbps IEEE 802.11g Wireless Cardbus Adapter
One Driver & Utility with User’s Guide CD-ROM
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the Wireless Cardbus Adapter can be performed using the following
steps:
u
Visually inspect the Cardbus Adapter and make sure that it is fully plugged in to
the Cardbus slot.
u
Make sure that there is a well environment that there is no much intrusion to
have a better connection.
2
HARDWARE INSTALLATION
LED Indicator
Power (PWR)
The PWR indicator lights green while the Wireless Cardbus adapter is connecting
to the Cardbus or PCMCIA slot, otherwise, it is off.
ACT (Activity)
The ACT indicator blinks green when the Wireless Cardbus Adapter is connected
to a network successfully and transmitting data. Otherwise the indicator is off
whiles the Wireless LAN is stand by.
Check the installation
The LEDs of the Wireless Cardbus Adapter are clearly visible and the status of the
network link can be seen instantly:
1. Once the device is plugged to the station’s Cardbus slot, the PWR LED of the
Wireless Cardbus Adapter will light up indicating a normal status.
2. When the device plugged to the station’s Cardbus slot and the driver was
installed, the ACT and PWR LED will start alternate blinking, it means that the
device is starting to scan the wireless devices near the Wireless Cardbus Adapter.
3. While the Wireless Cardbus Adapter linked up and transmitting data to the
Access Point or to other Wireless LAN station, the ACT LED will start blinking.
3
SOFTWARE INSTALLATION
This section will lead you to install the driver and utility of the Wireless Cardbus
Adapter.
Windows 98se/ME/2000/XP Utility and Driver Installation
1. Insert the Wireless Cardbus Adapter Driver & Utility CD-ROM into computer’s
CD-ROM Drive and it will automatically run a setup menu and install the driver
and the utility. In some specific setting on Windows system, you may need to
proceed the software manually, go to your Windows Start menu and choose
Run, type “D:\Utility\Setup.exe” in the dialog box (D:\ will depend on where
your CD-ROM drive is located) and click OK.
2. If you need to install the driver manually, refer each Windows OS to the
following CD-Rom directory path: D:\Driver\\net5211.inf.
Note: (D:\ will depends on where the CD-ROM drive is located and
will depend on the Windows OS you are using).
3. The Install Shield Wizard screen will appear. Click “Next” to continue.
4. The installation program will help you to setup the Wireless Cardbus utility.
Be noted that the Windows XP have its own Wireless Utility; you can either
use the utility of Windows XP or the provided utility.
5. When the Wireless Cardbus Adapter was installed, you will see the icon on the
Windows task bar.
When the icon in the toolbar represents in full green color then the signal
strength has an excellent performance with the AP, if it represents in yellow
color then the signal strength has a fair performance with the AP, and if the icon
represents no color, then the signal strength has a worst performance with the
wireless station.
4
Wireless Utility Setting
I. Link Information
The default page is as below after launching the Utility program.
Status: Shows the BSSID associated, which can be used to identify the wireless
network.
SSID: Shows current SSID, which must be the same for the wireless client and AP
in order for communication to be established.
Frequency: Shows the current frequency used for wireless network.
Wireless Mode: Shows the current wireless mode used for wireless communication.
Encryption: Shows the current encryption mode used for wireless network.
TxRate: Shows the current data rate used for transmitting.
Channel: Shows the current channel for communication.
Link Quality: Shows the link quality of the 108Mbps wireless LAN PC card with
the Access Point when operating under Infrastructure mode.
Signal Strength: Shows the wireless signal strength of the connection between the
108Mbps wireless LAN PC card with the Access Point.
Data Rate: Shows the statistics of data transfer, and the calculation is based on the
number of packets transmitted and received.
5
II. Configuration
This is the page where changes the basic settings of the PC card with the minimum
amount of effort to implement a secure wireless network environment.
SSID: Service Set Identifier, which is a unique name shared among all clients and
nodes in a wireless network. The SSID must be identical for each clients and nodes
in the wireless network.
Wireless Mode: There are two types available for selection
?Infrastructure – to establish wireless communication with LAN and other wireless
clients through the use the Access Points.
?Ad-Hoc – to establish point-to-point wireless communication directly with other
wireless client devices such as wireless network PCI Adapter.
AdHoc Band: There are two bands available for selection- 11B and 11G
Channel: The value of channel that AP will operate in. User can select the channel
range of 1 to 11 for North America (FCC) domain and 1 to 13 for European (ETSI)
domain and 1 to 14 for Japanese domain.
Tx Rate: Select the data rate for data transmission.
Power Mode: There are 3 modes to choose.
?Continuous Access Mode (default) – the PC card is constantly operating with full
power and it consumes the most power.
? Maximum Power Save – the PC card consumes the least power and only operates
when there is wireless network activity.
?Power Save – the PC card consumes the moderate level of power.
6
Preamble: Select Long or Short Preamble type. Preamble is a sequence of bits
transmitted at 1Mbps that allows the PHY circuitry to reach steady-state
demodulation and synchronization of bit clock and frame start. Two different
preambles and headers are defined: the mandatory supported Long Preamble and
header, which interoperate with the 1 Mbit/s and 2 Mbit/s DSSS specification (as
described in IEEE Std 802.11), and an optional Short Preamble and header (as
described in IEEE Std 802.11b). At the receiver, the Preamble and header are
processed to aid in demodulation and delivery of the PSDU. The Short Preamble
and header may be used to minimize overhead and, thus, maximize the network
data throughput. However, the Short Preamble is supported only from the IEEE
802.11b (High- Rate) standard and not from the original IEEE 802.11. That means
that stations using Short-Preamble cannot communicate with stations implementing
the original version of the protocol. Click “Apply” for the changes to take effect.
Support Band: There are three functions for users select, including 11B, 11G and
eXtended Range. The default setting is 11B, 11G and eXtended Range enable,
which is interoperable with both 11B and 11G devices, and provide more than
500m connection ability.
Note: user must select one of 11B or 11G at least, otherwise the wireless
connection will not function.
III. Advanced
This is the page to configure Security settings of 108Mbps wireless LAN PC card.
Encryption: 4 options are available: Disable, Enable, WPA and WPA-PSK.
Select Enable or Disable for WEP data encryption feature. If one of the two
7
options is selected, it is required to select the Authentication mode from the next
dropping list. If WPA is selected, configuration is enabled. Please click the
“configuration”. The below window is pop up. Then, please select the certificate
that user wants to use and enter the server name and login name
If WPA-PSK is selected, click the configuration button. The popping window is as
the below. Please enter the key.
Auth. Mode: There are three modes available to choose.
?Open Authentication – the sender and receiver do not share secret Key for
communication. Instead, each party generates its own key-pairs and asks the other
party to accept it. The key is regenerated when the connection is established every
time.
?Shared Authentication – the sender and receiver shares the common key for
data communication, and the key is used for extended length of time.
?Auto – depend on the communication to establish, and automatically use the
proper authentication mode.
The following will only be activated to allow for configuration when Encryption is
enabled.
Default Key: select one of the 4 keys to use.
8
Network Key: choose the encryption way, either in HEX or ASCII formats, and
enter the password in the blank space.
Key Length: select 64 or 128 bits as the length of the keys
Key Format: ASCII or HEX
IV. Site Survey
This page allows user to enable the Site Survey function to scan for the available
wireless network (wireless clients and Access Points) and establish wireless
communications with one.
Available Network – displays the wireless networks (wireless clients and Access
Points) that are in signal range.
Select any one of them to establish communications by simply mouse double-click
or click on the “Connect” button.
Click “Refresh” button to start scanning for available network again.
Profile – User can create and manage the created profiles for Home, offices or
public areas. By double-clicking on one of the created profile, the setting will adapt
to the configuration such as SSID, channel, and WEP settings saved by that
particular profile.
Remove: To remove the selected the profile
Properties: To view and change its settings of the profile.
9
Add: To add a profile. Then, the following screen would appear. User can enter the
necessary information required for accessing Access Points or Wireless Router.
V. About
This page displays some information about the 108Mpbs wireless LAN PC card
utility, which includes the version numbers for Driver, Firmware and Utility. When
there is new version of software available for upgrade, users will be able to identify
by version numbers.
10
R&TTE Standards List
R&TTE List of Standard
With referring to the article of the directive of R&TTE 1999/5/EC, the following equipment:
Product Description / Supplementary Info
Manufacturer
Brand
Type
802.11g Wireless PC Card
CAMEO COMMUNICATIONS, INC.
CAMEO, Level One, LG, Etherwan, Allnet GmbH
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A
has been tested to and conforms with the following List of R&TTE Harmonized standards:
Standard
ETSI EN 300 328
ETSI RF Specification
Issue date
V1.4.1 Apr. 2003
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; Data transmission equipment operating in the 2,4GHz
ISM band and using spread spectrum modulation techniques; Harmonized
EN covering essential requirements under article 3.2 of the R&TTE Directive.
Meets R&TTE directive art. 3.2.a on effective use of radio frequency
spectrum so as to avoid harmful interference.
ETSI EN 301 489-1
V1.4.1 Aug. 2002
ETSI EN 301 489-17
V1.2.1 Apr. 2002
ETSI EMC Specification Electromagnetic com patibility and Radio spectrum Matters(ERM);
Electro Magnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common Technical requirements; Part 17: Specific
conditions for Wideband data and HIPERLAN equipment.
Meets R&TTE directive art. 3.1.b of essential requirements on protection with
respect to Electro Magnetic Compatibility.
As such standards referred to tin Article 5 of the directive have not been applied or do not exist, the
following Adopted solutions with descriptions and explanations as listed below, have been applied
in full or in part, to meet the essential requirements of the directive:
Standard
EN 60950-1
LVD specification
Issue date
2001
Safety of information technology equipment, including electrical business
equipment.
Meets R&TTE directive art. 3.1.a of essential requirements on protection of
the health and safety of the user.
Draw up in
Date
TAIWAN, R.O.C.
2005/4/27
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Signature & company stamp
Jason Chang /
Wireless Comm. R&D Dept. Manager
RF-EMC Test Reports and
Corresponding Annexes
Test Report -------------------------------------------------------------------------------- 1/31
Report No.
C51ET050252
Specifications
ETSI EN 300 328 V.1.4.1 (2003-04)
Applicant
CAMEO COMMUNICATIONS, INC.
Applicant
address
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Items tested
Model No.
802.11g Wireless PC Card
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,
ALL0282A
EUT Condition
Engineering sample;
(Sample # C51050252)
Results
Date
Compliance (As detailed within this report)
03/30/2005 (month / day / year) (Sample received)
04/06/2005 to 04/18/2005
(Test)
Pre-production;
Prepared by
______________________
Authorized by
Issue date
April 21, 2005
Final production
Project Engineer
(Jack Tsai)
General Manager
(Frank Tsai)
(month / day / year)
Modifications
None
Tested by
Training Research Co., Ltd.
Office at
No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan
Laboratory at
1F, No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan
Open site at
No. 15, Lane 530, Balian Rd., Sec. 1, Shijr City, Taipei Hsien 221, Taiwan
Conditions of issue:
This test report shall not be reproduced except in full, without written approval of
TRC. And the test result contained within this report only relate to the sample submitted
for testing.
Ϫ Aut. No. ELA 131
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 2/31
We here by verify that:
The test data, data evaluation, test procedures and equipment configurations shown in this report
were made mainly in accordance with the procedures given in ETSI EN 300 328 (V.1.4.1) as a reference.
All test were conducted by Training Research Co., Ltd., 255 Nanyang Street, Shijr, Taipei Hsien
221, Taiwan, R.O.C. Also, we attest to the accuracy of each.
We further submit that the energy emitted by the sample EUT tested as described in the report is
in compliance with the technical requirements set second edition in the European Telecommunication
Standard ETSI EN 300 328 (V.1.4.1).
Reservation:
The test results herein refer only to the tested sample. Training Research Co., Ltd. is not
responsible for any generalizations or conclusions draw from these test results and concerning further
samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report.
Test by :
Training Research Co., Ltd.
TEL: 886-2-26935155
FAX: 886-2-26934440
No. 255, Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C.
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 3/31
Tables of Contents
I.
GENERAL ..........................................................................................4
1.1 INTRODUCTION ..........................................................................................................4
1.2 DESCRIPTION OF EUT.................................................................................................4
1.3 TEST METHOD ...........................................................................................................4
1.4 DESCRIPTION OF SUPPORT EQUIPMENT ......................................................................5
1.5 CONFIGURATION OF SYSTEM UNDER TEST .................................................................6
1.6 VERIFY THE FREQUENCY AND CHANNEL.....................................................................7
1.7 TEST PROCEDURE.......................................................................................................7
1.8 LOCATION OF THE TEST SITE......................................................................................7
1.9 GENERAL TEST CONDITION ........................................................................................8
II.
SECTION 5.2.1: EFFECTIVE RADIATED POWER....................10
2.1 Test Result of Effective Radiated Power for 802.11b ................................................10
2.2 Test Result of Effective Radiated Power for 802.11g.................................................11
III.
SECTION 5.2.2: PEAK POWER DENSITY...................................12
3.1 Test Result of Peak Power Density for 802.11b........................................................12
3.2 Test Result of Peak Power Density for 802.11g........................................................12
IV.
SECTION 5.2.3 : FREQUENCY RANGE.......................................15
4.1 Test Result of Frequency Range for 802.11b ............................................................15
4.2 Test Result of Frequency Range for 802.11g.............................................................17
V.
SECTION 5.2.4: TRANSMITTER SPURIOUS EMISSIONS .......19
5.1 Test Result for IEEE 802.11b...................................................................................19
5.2 Test Result for IEEE 802.11g...................................................................................22
VI.
SECTION 5.3.2: RECEIVER SPURIOUS EMISSIONS................24
6.1 Test Result for IEEE 802.11b...................................................................................24
6.2 Test Result for IEEE 802.11g...................................................................................27
6.3 Test Result for Standby mode...................................................................................29
VII. INSTRUMENT AND ANCILLARIES EQUIPMENT OF LIST ....30
Appendix A: Antenna Specification............................................................31
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 4/31
I. GENERAL
1.1
Introduction
The following measurement report is submitted on behalf of Applicant in support of a wireless
LAN measurement in accordance with ETSI EN 300 328-2 V.1.4.1 (April 2003) of the European
Telecommunication Standard.
1.2
1.3
Description of EUT
Product Name
:
802.11g Wireless PC Card
Model No.
:
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,
ALL0282A
Frequency Range
:
2.400GHz ~ 2.4835GHz
Operating Frequency
:
2.412GHz ~ 2.472GHz
Support Channel
:
13 Channels
Modulation Skill
:
DBPSK, DQPSK, CCK, OFDM
Power Type
:
Powered by PCMCIA interface of client’ s device
Power Cable
:
None
Data Cable
:
None
Test Method
1. The EUT connected with PC:
Insert the EUT into the PCMCIA bus of the notebook computer
2. Using the notebook computer and software provided by the manufacturer to control the
EUT. The test is performed under the specific conditions.
3. Set different channel and data rate being tested, and then making EUT to the following
modes:
a) The mode of continuous transmission.
b) The receive mode.
c) The standby mode.
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 5/31
1.4
Description of Support Equipment
In order to construct the minimum testing, following equipment were used as the support units.
Notebook
:
IBM Think Pad X20
Model No.
:
2662-11T
Serial No.
:
FX-1192200/09
FCC ID
:
DoC Approved
BSMI
:
3892B565
Adaptor
:
IBM
Model No.
:
PA2450U
Serial No.
:
02K6654
FCC ID
:
DoC Approved
Power type
:
I/P: 100 ~ 240vac, 50 ~ 60 Hz, 0.5A ~ 1.2A; O/P: 16Vdc, 4.5A
Power cord
:
Non-shielded, 1.80m length, Plastic, with ferrite core
Notebook
:
ASUSTek Computer
Model No.
:
AB00F
Serial No.
:
24NP016361
FCC ID
:
DoC Approved
BSMI
:
41016012
Power type
:
100 ~ 240VAC, 1A 50/60 Hz, Switching
Adaptor of PC :
LITE-ON Electronics, Inc.
Model No.
:
PA-1530-01
Serial No.
:
00151184
FCC ID
:
DoC Approved
BSMI
:
3882B259
Power cable
:
Non-shielded, 1.72m length, Plastic hood, No ferrite core
(Between power adaptor and AC power source)
Power cable
:
Shielded, 1.48m length, Plastic hood, with ferrite core
(Between power adaptor and notebook)
WLAN Card
:
Gemtek Technology Co., Ltd.
Model No.
:
C911003
FCC ID
:
MXF-C911003
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 6/31
1.5
Configuration of System Under Test
AC source
Notebook
EUT
Adaptor
Test-table
The tests below are carried with the EUT transmitter set at high power in TDD mode. The
EUT is forced to select of output power level and channel number by computer.
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 7/31
1.6
Verify the Frequency and Channel
CH
1
2
3
4
5
6
7
8
9
10
0
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
1
2462
2467
2472
---
---
---
---
---
---
---
Note:
(1) This is for sure that all frequencies are in 2.4GHz – 2.4835 GHz.
(2) After test, the EUT operating frequencies are in 2.412GHz to 2.472GHz. So all the item as
followed in testing report are need to test these three frequencies:
channel 1, channel 7, and channel 13.
(3) E.T.S.I (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
1.7
Test Procedure
All measurements performed in this report were performed mainly according to the techniques
described in ETSI EN 300328 (April, 2003) and the pre-setup was written on 1.4 test method, the
detail setup was written on each test item.
1.8
Location of the Test Site
The radiated emissions measurements required by the rules were performed on the
three-meter, Anechoic Chamber (Registration Number: 93906) maintained by Training
Research Co., Ltd. 1F., No. 255 Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C. Complete
description and measurement data have been placed on file with the commission. The conducted
power line emissions tests and other test items were performed in a anechoic chamber also located at
Training Research Co., Ltd.
No. 255 Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C. Training Research Co.,
Ltd. is listed by the FCC as a facility available to do measurement work for others on a contract
basis.
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 8/31
1.9
General Test Condition
The test condition shall be as follows: (See Clause 6)
The NORMAL temperature and humidity conditions for tests shall be any convenient
combination of temperature and humidity within the following ranges:
-temperature: +15к to +35к;
-relative humidity: 20% to 75%.
The normal test voltage for equipment to be connected to the main shall be the nominal mains
voltage.
For purpose of this ETS, the normal voltage shall be the declared voltage or any of the declared
voltages for which the equipment was designed.
The frequency of the test power source corresponding to the AC mains shall be between 49Hz
and 51Hz. When radio equipment is intended for operation from the usual, alternator fed lead-acid
battery power source used on vehicles, then the normal test voltage shall be 1.1 times the nominal
voltage of the battery (6V, 12V, etc.)
For operation from other power sources or types of battery (primary or secondary), the
nominal test voltage shall be as declared by the equipment manufacturer. This shall be recorded in the
test report.
For tests at EXTREME temperatures, measurements shall be made in accordance with the
procedures specified in subclause 6.4.3, at the upper and lower temperatures of the range as follows:
temperature: -20к to +55к;
Where the manufacturer’ s declared operating range does not include the range of -20к to
+55к, the equipment shall be tested over the following temperature ranges:
a)0к to +35кfor equipment intended for INDOOR use only, or intended for use in areas
where the temperature is controlled within this range;
b)Over the extremes of the operating temperature range(s) of the declared host equipment(s)
in case of plug-in radio devices.
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 9/31
The frequency range as in subclause 5.2.3 and the e.i.r.p. Limit in subclause5.2.1 shall not be
exceeded.
Tests at extreme power source voltages specified below are not required when the equipment
under test is designed for operation as part of and powered by another system or piece of equipment.
Where this is the case, the limit values of the host system or host equipment shall apply. The
appropriate limit values shall be declared by the manufacturer and recorded in the test report.
The EXTREME TEST VOLTAGE for equipment to be connected to an AC mains source
shall be the nominal mains voltage ±10%.
When radio equipment is intended for operation from the usual type of alternator fed lead-acid
battery power source used on vehicles, then extreme test voltage shall be 1.3 and 0.9 times the
nominal voltage of the battery (6V, 12V,etc.).
The lower extreme test voltage for equipment with power source using the following type of
battery, shall be:
-for the Leclanche’ or lithium type battery: 0.85 times the nominal voltage of the battery;
-for the mercury or nickel-cadmium type of battery: 0.9 times the nominal voltage of the
battery.
In both cases, the upper extreme test voltage shall be 1.15 times the nominal voltage of the
battery.
For equipment using other power sources, or capable of being operated from a variety of
power sources (primary or secondary), the extreme test voltages shall be those declared by the
manufacturer; these shall be recorded in the test report. Before measurements are made the
equipment shall have reached thermal balance in the test chamber.
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 10/31
II. Section 5.2.1: Effective Radiated Power
2.1
Test Result of Effective Radiated Power for 802.11b
Power level at which the measurement has been performed
78.705 mW
TRANSMITTER PEAK POWER
TEST CONDITION
Channel 1
Channel 7
Channel 13
Tx Peak
Tx Ave.
Cable Loss
(dBm)
(dBm)
(dB)
25 {C
10.08
7.62
0 {C
10.58
7.90
35 {C
9.96
7.51
25 {C
10.13
7.60
0 {C
10.43
7.85
35 {C
10.04
7.51
25 {C
10.39
7.63
0 {C
10.68
8.01
35 {C
10.23
7.62
6.25
6.20
6.30
Tx Peak : 23dBm / -7dBW
Limit
Tx Ave. : 20dBm / -10dBW
Uncertainty
̈́ 0.56dB
NOTE:
(1) The E.U.T is a stand-alone radio device (see the clause 6.2.2). The powered by the adaptor. So,
the AC power is used as the extreme voltage source. (See clause 6.3.2.1)
(2) The value of table is worst case during test condition, includes different combinations of
transmitter rate antenna polarity and temperature
(3) TX PEAK: Max Peak Power, TX Ave.: Average Peak.
Actually Power = Max Peak Power + Cable Loss,
E.I.R.P. = Actually Power + Antenna Gain
= 16.98dBm + 1.98dBi
= 18.96dBm
(4) ETSI (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report ------------------------------------------------------------------------------11/31
2.2
Test Result of Effective Radiated Power for 802.11g
Power level at which the measurement has been performed 40.299
mW
TRANSMITTER PEAK POWER
TEST CONDITION
Tx Peak
Tx Ave.
Cable Loss
(dBm)
(dBm)
(dB)
25 {C
13.42
3.65
0 {C
14.02
3.98
35 {C
13.68
3.46
25 {C
13.57
3.90
0 {C
14.23
4.14
35 {C
13.14
3.54
25 {C
13.55
3.81
0 {C
14.18
4.11
35 {C
13.42
3.63
Channel 1
Channel 7
Channel 13
Tx Peak : 23dBm / -7dBW
Limit
Tx Ave. : 20dBm / -10dBW
Uncertainty
± 0.56dB
NOTE:
(5) Duty cycle (X):
Tx on = 296uS, Tx on + Tx off = 688uS
Average power = Tx Ave. + Cable Loss = 10.41 dBm
Peak power = Tx Peak. + Cable Loss = 20.48 dBm
Antenna Gain = 1.98 dBi
E.I.R.P. = Average power + Antenna Gain +10 log(1/X)
= 10.41 + 1.98 + 3.66
= 16.05 dBm
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
6.25
6.20
6.30
Test Report -------------------------------------------------------------------------------- 12/31
III. Section 5.2.2: Peak Power Density
3.1
Test Result of Peak Power Density for 802.11b
Frequency
Ppr
CF
Ant. Gain
Ppq
Limit
Margin
(MHz)
(dBm)
(dB)
(dB)
(dBm)
(dBm)
(dB)
CH 01
2412
-0.42
6.57
1.98
8.13
10.00
-1.87
CH 07
2442
-0.26
6.53
1.98
8.25
10.00
-1.75
CH 13
2472
-0.55
6.74
1.98
8.17
10.00
-1.83
Channel
̈́ʳ1.50dB
Uncertainty
3.2
Test Result of Peak Power Density for 802.11g
Frequency
Ppr
CF
Ant. Gain
Ppq
Limit
Margin
(MHz)
(dBm)
(dB)
(dB)
(dBm)
(dBm)
(dB)
CH 01
2412
-0.88
6.57
1.98
7.67
10.00
-2.33
CH 07
2442
-0.73
6.53
1.98
7.78
10.00
-2.22
CH 13
2472
-0.94
6.74
1.98
7.78
10.00
-2.22
Channel
Uncertainty
̈́ʳ1.50dB
NOTE:
(1) For equipment using FHSS modulation, the peak power density shall be limit to
–10dBW(100mW) per 100kHz E.I.R.P.
(2) For equipment using other types modulation, the peak power density shall be limit
–20dBW(10mW) per MHz E.I.R.P.
(3) Ppr: spectrum read power density (using peak search mode), CF: correct factor,
CF: Correct Factor, AG: Antenna Gain
Ppq: actual peak power density in the spread spectrum band. Ppq = Ppr + CF + AG
(4) The value of table is worst case during test condition, includes different combination s of
transmitter rate, antenna polarity and temperature
(5) The data in the above table are summarizing the following attachment spectrum analyzer hard
copy.
(6) ETSI (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 13/31
IEEE 802.11b
CH01
CH07
CH13
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 14/31
IEEE 802.11g
CH01
CH07
CH13
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 15/31
IV. Section 5.2.3 : Frequency Range
4.1
Test Result of Frequency Range for 802.11b
Transmitter Frequency Range – DSSS Equipment
FREQUENCY(MHz)
TEST CONDITION
Lowest Channel
Highest Channel
Channel 1
Channel 13
Frequency Rate (Mbps) Frequency Rate (Mbps)
˅ˈк
0к
35к
230 V
2402.30
11
2482.70
11
207 V
2402.20
11
2482.70
11
253 V
2402.20
11
2482.70
11
207 V
2402.30
11
2482.70
11
253 V
2402.30
11
2482.70
11
Measured frequencies
(lowest and highest)
Limit
Uncertainty
FL = 2402.20 MHz
FH = 2482.70 MHz
FL > 2400MHz
̈́ʳ1837Hz
FH < 2483.5MHz
Note:
(1) The E.U.T is a stand-alone radio device (see the clause 6.2.2). This is powered by the main.
So, the AC power is used as the extreme voltage source. (see clause 6.3.2.1).
(2) B: Battery, AC: AC Source, Rate: Transmitter Rate.
(3) The value of table is worst case during test condition, includes different combinations of
transmitter rate, antenna polarity and temperature.
(4) The data in the above table are summarizing the following attachment spectrum analyzer
hard copy.
(5) ETSI (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 16/31
Channel 01 (The lowest one in the frequency range)
Channel 13 (The greatest one in the frequency range)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 17/31
4.2
Test Result of Frequency Range for 802.11g
Transmitter Frequency Range – DSSS Equipment
FREQUENCY(MHz)
TEST CONDITION
Lowest Channel
Highest Channel
Channel 1
Channel 13
Frequency Rate (Mbps) Frequency Rate (Mbps)
˅ˈк
0к
35к
230 V
2402.40
54
2482.70
54
207 V
2402.20
54
2482.90
54
253 V
2402.20
54
2482.90
54
207 V
2402.50
54
2482.60
54
253 V
2402.50
54
2482.60
54
Measured frequencies
(lowest and highest)
Limit
Uncertainty
FL = 2402.20 MHz
FH = 2482.90 MHz
FL > 2400MHz
̈́ʳ1837Hz
FH < 2483.5MHz
Note:
(1) The E.U.T is a stand-alone radio device (see the clause 6.2.2). This is powered by the main.
So, the AC power is used as the extreme voltage source. (see clause 6.3.2.1).
(2) B: Battery, AC: AC Source, Rate: Transmitter Rate.
(3) The value of table is worst case during test condition, includes different combinations of
transmitter rate, antenna polarity and temperature.
(4) The data in the above table are summarizing the following attachment spectrum analyzer
hard copy.
(5) ETSI (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 18/31
Channel 01 (The lowest one in the frequency range)
Channel 13 (The greatest one in the frequency range)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 19/31
V.
Section 5.2.4: Transmitter Spurious Emissions
5.1
Test Result for IEEE 802.11b
Channel 1 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
733.67
H
-71.40
-36.00
-35.40
11
234.91
H
-65.47
-36.00
-29.47
11
261.59
H
-63.07
-36.00
-27.07
11
300.39
H
-63.57
-36.00
-27.57
11
325.85
H
-66.11
-36.00
-30.11
11
390.72
H
-62.52
-36.00
-26.52
11
233.09
V
-62.66
-36.00
-26.66
11
261.59
V
-65.20
-36.00
-29.20
11
300.39
V
-64.06
-36.00
-28.06
11
325.85
V
-64.65
-36.00
-28.65
11
391.32
V
-62.29
-36.00
-26.29
11
565.92
V
-65.87
-36.00
-29.87
11
Note:
(1) A. P. means antenna polarization, horizontal and vertical.
Amplitude means the fundamental emission measured
C F. means Correct Factor, Rate means transmitter rate
Corrected Factor (C. F.) = Cable Loss + Antenna Factor – Amplified Gain
LEVEL = Amplitude + Corrected Factor
(2) The margin is minus that means under limit.
(3) The value of table is the worst case during test condition. This is including different
combinations of transmitter rate antenna polarity and temperature.
(4) ETSI (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
(5) The level of confidence of 95% , the uncertainty of measurement of radiated emission is
+2.85dB / -2.77dB
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 20/31
Channel 13 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
234.31
H
-65.69
-36.00
-29.69
11
260.98
H
-63.16
-36.00
-27.16
11
300.39
H
-62.79
-36.00
-26.79
11
325.85
H
-65.43
-36.00
-29.43
11
390.72
H
-64.34
-36.00
-28.34
11
500.45
H
-67.16
-36.00
-31.16
11
234.31
V
-62.63
-36.00
-26.63
11
298.57
V
-64.46
-36.00
-28.46
11
325.24
V
-65.29
-36.00
-29.29
11
390.72
V
-65.11
-36.00
-29.11
11
433.76
V
-66.09
-36.00
-30.09
11
565.32
V
-66.03
-36.00
-30.03
11
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 21/31
Channel 1 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
1608.33
H
-56.94
-30.00
-26.94
11
2287.50
H
-51.17
-30.00
-21.17
11
2462.50
H
-50.21
-30.00
-20.21
11
2637.50
H
-56.37
-30.00
-26.37
11
9647.40
H
-50.29
-30.00
-20.29
11
1608.33
V
-64.78
-30.00
-34.78
11
2287.50
V
-62.84
-30.00
-32.84
11
2462.50
V
-60.88
-30.00
-30.88
11
2595.83
V
-63.65
-30.00
-33.65
11
2639.58
V
-63.36
-30.00
-33.36
11
9647.40
V
-50.45
-30.00
-20.45
11
Channel 13 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
1647.92
H
-50.93
-30.00
-20.93
11
2264.58
H
-54.20
-30.00
-24.20
11
2287.50
H
-50.67
-30.00
-20.67
11
2358.33
H
-54.25
-30.00
-24.25
11
9890.21
H
-51.21
-30.00
-21.21
11
1647.92
V
-59.59
-30.00
-29.59
11
2279.17
V
-63.24
-30.00
-33.24
11
2400.00
V
-63.90
-30.00
-33.90
11
2597.92
V
-61.97
-30.00
-31.97
11
2639.58
V
-60.53
-30.00
-30.53
11
9890.21
V
-51.04
-30.00
-21.04
11
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 22/31
5.2
Test Result for IEEE 802.11g
Channel 1 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
233.70
H
-64.71
-36.00
-28.71
54
260.98
H
-61.73
-36.00
-25.73
54
300.39
H
-63.83
-36.00
-27.83
54
325.85
H
-65.73
-36.00
-29.73
54
390.72
H
-63.97
-36.00
-27.97
54
233.09
V
-62.73
-36.00
-26.73
54
300.39
V
-63.52
-36.00
-27.52
54
325.24
V
-63.82
-36.00
-27.82
54
390.72
V
-63.15
-36.00
-27.15
54
564.11
V
-65.37
-36.00
-29.37
54
Channel 13 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
234.91
H
-65.14
-36.00
-29.14
54
261.59
H
-62.29
-36.00
-26.29
54
300.39
H
-63.50
-36.00
-27.50
54
325.85
H
-65.03
-36.00
-29.03
54
391.32
H
-62.59
-36.00
-26.59
54
233.09
V
-62.51
-36.00
-26.51
54
260.98
V
-63.44
-36.00
-27.44
54
300.39
V
-63.57
-36.00
-27.57
54
324.64
V
-65.54
-36.00
-29.54
54
390.72
V
-62.45
-36.00
-26.45
54
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 23/31
Channel 1 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
1608.33
H
-53.61
-30.00
-23.61
54
2208.33
H
-52.83
-30.00
-22.83
54
2279.17
H
-49.24
-30.00
-19.24
54
2358.33
H
-51.08
-30.00
-21.08
54
2464.58
H
-48.53
-30.00
-18.53
54
1608.33
V
-60.11
-30.00
-30.11
54
2287.50
V
-64.17
-30.00
-34.17
54
2464.58
V
-63.03
-30.00
-33.03
54
2639.58
V
-62.03
-30.00
-32.03
54
12060.10
V
-54.74
-30.00
-24.74
54
Channel 13 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
1647.92
H
-47.76
-30.00
-17.76
54
2264.58
H
-49.20
-30.00
-19.20
54
2287.50
H
-48.84
-30.00
-18.84
54
2400.00
H
-50.57
-30.00
-20.57
54
2558.33
H
-55.41
-30.00
-25.41
54
12060.10
H
-55.74
-30.00
-25.74
54
1647.92
V
-56.76
-30.00
-26.76
54
2266.67
V
-63.01
-30.00
-33.01
54
2287.50
V
-64.84
-30.00
-34.84
54
2560.42
V
-61.41
-30.00
-31.41
54
2639.58
V
-59.70
-30.00
-29.70
54
12360.73
V
-57.12
-30.00
-27.12
54
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 24/31
VI. Section 5.3.2: Receiver Spurious Emissions
6.1
Test Result for IEEE 802.11b
Channel 1 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
233.09
H
-64.84
-57.00
-7.84
11
261.59
H
-60.83
-57.00
-3.83
11
299.78
H
-63.53
-57.00
-6.53
11
325.85
H
-66.24
-57.00
-9.24
11
390.72
H
-62.76
-57.00
-5.76
11
501.06
H
-66.28
-57.00
-9.28
11
233.09
V
-62.64
-57.00
-5.64
11
261.59
V
-64.54
-57.00
-7.54
11
300.39
V
-63.29
-57.00
-6.29
11
325.24
V
-65.67
-57.00
-8.67
11
391.32
V
-64.93
-57.00
-7.93
11
565.92
V
-64.85
-57.00
-7.85
11
Note:
(1) A. P. means antenna polarization, horizontal and vertical.
Amplitude means the fundamental emission measured.
C F. means Correct Factor, Rate means transmitter rate
Corrected Factor (C. F.) = Cable Loss + Antenna Factor – Amplified Gain
LEVEL = Amplitude + Corrected Factor
(2) The value of table is worst case during test condition, includes different combinations of
transmitter rate antenna polarity and temperature
(3) ETSI (2400MHz ~ 2483.5MHz),
FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)
(4) The level of confidence of 95% , the uncertainty of measurement of radiated emission is
+2.85dB / -2.77dB
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 25/31
Channel 13 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
234.31
H
-65.06
-57.00
-8.06
11
261.59
H
-63.07
-57.00
-6.07
11
300.39
H
-63.52
-57.00
-6.52
11
325.24
H
-64.50
-57.00
-7.50
11
390.72
H
-63.08
-57.00
-6.08
11
501.06
H
-66.91
-57.00
-9.91
11
234.31
V
-62.45
-57.00
-5.45
11
300.39
V
-64.20
-57.00
-7.20
11
325.24
V
-66.02
-57.00
-9.02
11
390.72
V
-66.17
-57.00
-9.17
11
562.89
V
-65.80
-57.00
-8.80
11
721.12
V
-66.04
-57.00
-9.04
11
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 26/31
Channel 1 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
2189.69
H
-65.56
-47.00
-18.56
11
3653.54
H
-62.31
-47.00
-15.31
11
5112.50
H
-60.21
-47.00
-13.21
11
9415.94
H
-56.49
-47.00
-9.49
11
2106.46
V
-66.59
-47.00
-19.59
11
3340.21
V
-63.00
-47.00
-16.00
11
5274.06
V
-60.53
-47.00
-13.53
11
9680.31
V
-56.23
-47.00
-9.23
11
Channel 13 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
2091.77
H
-66.51
-47.00
-19.51
11
3301.04
H
-61.63
-47.00
-14.63
11
5401.35
H
-60.25
-47.00
-13.25
11
8813.75
H
-56.49
-47.00
-9.49
11
1817.60
V
-67.71
-47.00
-20.71
11
2968.12
V
-64.20
-47.00
-17.20
11
4975.42
V
-60.84
-47.00
-13.84
11
8035.31
V
-57.67
-47.00
-10.67
11
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 27/31
6.2
Test Result for IEEE 802.11g
Channel 1 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
234.31
H
-65.36
-57.00
-8.36
54
261.59
H
-63.40
-57.00
-6.40
54
300.39
H
-62.60
-57.00
-5.60
54
391.32
H
-63.62
-57.00
-6.62
54
501.06
H
-66.24
-57.00
-9.24
54
233.09
V
-62.76
-57.00
-5.76
54
261.59
V
-65.78
-57.00
-8.78
54
299.78
V
-63.63
-57.00
-6.63
54
390.72
V
-66.17
-57.00
-9.17
54
667.17
V
-66.05
-57.00
-9.05
54
Channel 13 (30MHz to 1GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
233.70
H
-64.73
-57.00
-7.73
54
261.59
H
-60.69
-57.00
-3.69
54
300.39
H
-63.17
-57.00
-6.17
54
390.72
H
-63.97
-57.00
-6.97
54
501.06
H
-64.87
-57.00
-7.87
54
234.91
V
-62.83
-57.00
-5.83
54
299.78
V
-63.06
-57.00
-6.06
54
390.72
V
-64.00
-57.00
-7.00
54
564.11
V
-66.25
-57.00
-9.25
54
721.12
V
-65.50
-57.00
-8.50
54
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 28/31
Channel 1 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
2101.56
H
-65.79
-47.00
-18.79
54
3002.40
H
-63.62
-47.00
-16.62
54
4632.71
H
-61.56
-47.00
-14.56
54
8025.52
H
-57.70
-47.00
-10.70
54
2003.65
V
-65.84
-47.00
-18.84
54
3208.02
V
-63.52
-47.00
-16.52
54
4892.19
V
-60.57
-47.00
-13.57
54
7991.25
V
-57.94
-47.00
-10.94
54
Channel 13 (1GHz to 12.75GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
1724.58
H
-68.52
-47.00
-21.52
54
2733.12
H
-65.34
-47.00
-18.34
54
3820.00
H
-61.64
-47.00
-14.64
54
6150.42
H
-60.01
-47.00
-13.01
54
1891.04
V
-67.25
-47.00
-20.25
54
3002.40
V
-64.12
-47.00
-17.12
54
4813.85
V
-60.78
-47.00
-13.78
54
8015.73
V
-55.72
-47.00
-8.72
54
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 29/31
6.3
Test Result for Standby mode
(30MHz to 12.5GHz)
Frequency
A. P.
LEVEL
Limit
Margin
Rate
(MHz)
(H/V)
(dBm)
(dBm)
(dB)
(Mbps)
74.26
H
-70.96
-57.00
-13.96
---
133.67
H
-70.66
-57.00
-13.66
---
233.70
H
-64.85
-57.00
-7.85
---
261.59
H
-63.16
-57.00
-6.16
---
300.39
H
-62.13
-57.00
-5.13
---
325.24
H
-64.48
-57.00
-7.48
---
390.72
H
-61.96
-57.00
-4.96
---
501.06
H
-66.96
-57.00
-9.96
---
4206.77
H
-61.66
-47.00
-14.66
---
7364.58
H
-57.55
-47.00
-10.55
---
233.09
V
-62.66
-57.00
-5.66
---
260.98
V
-64.57
-57.00
-7.57
---
300.39
V
-64.13
-57.00
-7.13
---
325.85
V
-66.69
-57.00
-9.69
---
390.72
V
-66.48
-57.00
-9.48
---
434.37
V
-67.72
-57.00
-10.72
---
567.14
V
-65.96
-57.00
-8.96
---
666.56
V
-65.77
-57.00
-8.77
---
5690.21
V
-59.25
-47.00
-12.25
---
8769.69
V
-56.69
-47.00
-9.69
---
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 30/31
VII. Instrument and Ancillaries Equipment of List
Calibration Date
Instrument Name
Model
Brand
Serial No.
Next time
EMI Receiver
8546A
HP
3520A00242
08/05/05
RF Filter Section
85460A
HP
3448A00217
08/05/05
Small Biconical
UBAA9114 &
SCHWARZECK
127
10/11/05
Antenna
BBVU9135
Pre-amplifier
PA1F
TRC
1FAC
05/20/05
Auto Switch Box
ASB-01
TRC
9904-01
05/20/05
A30A30-0058-50FS-15M
JYEBAO
SMA-01
05/20/05
A30A30-0058-50FS-1M
JYEBAO
SMA-02
05/20/05
Spectrum Analyzer
8564E
HP
3720A00840
08/13/05
Microwave
84125C
HP
US36433002
08/13/05
Horn Antenna
3115
EMCO
9104-3668
12/27/05
Standard Guide
84125-80008
HP
18-26.5GHz
10/15/05
84125-80001
HP
26.5-40GHz
10/15/05
Horn Antenna
1196E (3115)
HP (EMCO)
9704-5178
01/11/06
Pre-amplifier
PA2F
TRC
2F1GZ
06/20/05
Coaxial Cable
A30A30-0058-50FST118
JYEBAO
MSA-05
06/20/05
A30A30-0058-50FST118
JYEBAO
MSA-04
06/20/05
(?30MHz)
Coaxial Cable
(Double shielded,
15 meter)
Coaxial Cable
(1.1 meter)
Preamplifier
Horn Antenna
Standard Guide
Horn Antenna
(3 miter)
Coaxial Cable
(1 meter)
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Test Report -------------------------------------------------------------------------------- 31/31
Appendix A
Antenna Specification
Report No.: C51ET050252 (ETSI EN 300 328)
Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440
Measurement result of WLG-1103 Printed Antenna
Orientation of DUT measured in chamber
[
Y
Measurement Result
VSWR
Z
Radiation Pattern
1.XY-plane
2.XZ-plane
3.YZ-plane
Test Report ------------------------------------------------------------------------------- 1/45
Report No.
C51ET050252
Specifications
ETSI EN 301 489-1 V1.4.1 (August, 2002)
ETSI EN 301 489-17 V1.2.1 (April, 2002)
Applicant
CAMEO COMMUNICATIONS, INC.
Applicant
address
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Items tested
Model No.
802.11g Wireless PC Card
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,
ALL0282A
EUT Condition
Engineering sample;
(Sample # C51050252)
Results
Date
Compliance (As detailed within this report)
03/30/2005 (month / day / year) (Sample received)
04/06/2005 to 04/18/2005
(Test)
Pre-production;
Prepared by
______________________
Authorized by
Issue date
April 21, 2005
Final production
Project Engineer
(Jack Tsai)
General Manager
(Frank Tsai)
(month / day / year)
Modifications
None
Tested by
Training Research Co., Ltd.
Office at
No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan
Laboratory at
1F, No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan
Open site at
No. 15, Lane 530, Balian Rd., Sec. 1, Shijr City, Taipei Hsien 221, Taiwan
Conditions of issue:
This test report shall not be reproduced except in full, without written approval of
TRC. And the test result contained within this report only relate to the sample
submitted for testing.
Ϫʳ Aut. No. ELA 131
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 2/45
Generally Statement:
The results appear in the following order:
Electromagnetic compatibility and radio spectrum matters (ERM); Electro Magnetic
Compatibility (EMC) standard for radio equipment and services;
Part 1: Common Technical requirements
Part 17:Specific conditions for Wideband data and HIPERLAN equipment.
The results exhibits below only apply to particular samples tested and to the specific tests
carried out, as detailed in this Test Report. The issue of this Test Report does not indicate any
measure of Approval, Certification, Supervision, Control or Surveillance by Training Research
Co., Ltd. of any product. No extract, abridgement or abstraction from a Test Report may be
published or used to advertise a product without the written consent of the Director, Training
Research Co., Ltd. who reserves the absolute right to agree or reject all or any of the details of
any item of publicity for which consent may be sought.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 3/45
Contents
CHAPTER 0
EMISSION AND SUSCEPTIBILITY STANDARDS........5
EMISSION STANDARDS...............................................................................5
SUSCEPTIBILITY STANDARDS.....................................................................5
CHAPTER 1
INTRODUCTION..............................................................6
DESCRIPTION OF EUT ................................................................................6
TEST METHOD ...........................................................................................6
LIST OF SUPPORT EQUIPMENT ....................................................................7
CHAPTER 2
EMISSION AND IMMUNITY REQUIREMENTS
OVERVIEW .....................................................................9
EMISSION (ETSI EN 301 489-1) ................................................................9
IMMUNITY (ETSI EN 301 489-1).............................................................10
CHAPTER 3
PERFORMANCE CRITERIA.........................................11
ETSI EN 301 489-17, SUBCLAUSE 6.2 ....................................................11
CHAPTER 4
ELECTROSTATIC DISCHARGES IMMUNITY TEST 17
ESD TEST INFORMATION:........................................................................17
EN 61000-4-2 PHOTO OF TESTSET-UP .............................................19
CHAPTER 5
RADIO FREQUENCY IMMUNITY TEST (RS).............20
RS TEST INFORMATION:...........................................................................20
EN 61000-4-3 PHOTO OF TESTSET-UP .............................................22
CHAPTER 6
ELECTRIC FAST TRANSIENT/
BURST REQUIREMENTS TEST..................................23
EFT TEST INFORMATION: ........................................................................23
EN 61000-4-4 PHOTO OF TESTSET-UP .............................................26
CHAPTER 7
SURGE IMMUNITY TEST.............................................27
SURGE TEST INFORMATION:.....................................................................27
EN 61000-4-5 PHOTO OF TESTSET-UP .............................................29
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 4/45
CHAPTER 8
CONTINUOUS WAVE VOLTAGE IMMUNITY TEST 30
CS TEST INFORMATION:...........................................................................30
TEST INSTRUMENTS : ................................................................................32
EN 61000-4-6 PHOTO OF TESTSET-UP .............................................33
CHAPTER 9
VOLTAGE DIP / INTERRUPTION TEST .....................34
DIP TEST INFORMATION :.........................................................................34
EN 61000-4-11 PHOTO OF TESTSET-UP ...........................................35
CHAPTER 10 HARMONICS TEST........................................................36
CHAPTER 11 VOLTAGE FLUCTUATION AND FLICKER TEST.....37
CHAPTER 12 CONDUCTED EMISSION TEST....................................38
TEST CONDITION AND SETUP ....................................................................38
LIST OF TEST INSTRUMENT ......................................................................39
CONDUCTED TEST P LACEMENT (F RONT VIEW AND SIDE VIEW )...............40
TEST RESULT OF CONDUCTED EMISSIONS FOR MAINS POWER .................41
CHAPTER 13 RADIATED EMISSION TEST........................................42
TEST CONDITION AND SETUP ....................................................................42
LIST OF TEST INSTRUMENT ......................................................................43
RADIATED TEST PLACEMENT (FRONT VIEW AND REAR VIEW ).................44
TEST RESULT OF SPURIOUS RADIATED EMISSIONS ..................................45
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 5/45
Chapter 0
Emission and Susceptibility Standards
Emission Standards
Emission Standard
European Standard
International Standard
(
)
EN 61000-6-3/2001
IEC 61000-6-3/1996
(
)
EN 61000-6-4/2001
IEC 61000-6-4/1997
(
)
EN 50081-1/1992
(
)
EN 50081-1/8.93
(
)
EN 55014/4.93
CISPR 14: 1993
(
)
EN 55015/12.93
CISPR 15: 1992
(
)
EN 55013/2001
CISPR 13: 2001
(X)
EN 55022/98 +A1/2000 +A2/2003
CISPR 22: 2002
(X)
EN 61000-3-2/2000
IEC 61000-3-2: 2000
(X)
EN 61000-3-3/1995 +A1/2001
IEC 61000-3-3: 1994 +A1/2001
Susceptibility Standards
Susceptibility Standard
European Standard
International Standard
(
)
EN 61000-6-1/2001
IEC 61000-6-1/1997
(
)
EN 61000-6-2/2001
IEC 61000-6-2/1999
(
)
EN 50082-1/1997
(
)
EN 50082-2/1994
(
)
EN 55024/1998
CISPR 24/1997
+A1/2001+A2/2003
(
)
EN 55020/2002
CISPR 20/2002
(X)
EN 61000-4-2:2001
IEC 61000-4-2:2001
(X)
EN 61000-4-3:2002 +A1/2002
IEC 61000-4-3:2002 +A1/2002
(X)
EN 61000-4-4:1995
IEC 61000-4-4:1995
+A1/2000 +A2/2001
+A1/2000+A2/2001
(X)
EN 61000-4-5:2001
IEC 61000-4-5:2001
(X)
EN 61000-4-6:2003
IEC 61000-4-6:2003
(
EN 61000-4-8:2001
IEC 61000-4-8:2001
EN 61000-4-11:2001
IEC 61000-4-11:2001
)
(X)
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 6/45
Chapter 1
Introduction
Description of EUT
Product Name
:
802.11g Wireless PC Card
Model No.
:
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,
ALL0282A
Frequency Range
:
2.400GHz ~ 2.4835GHz
Operating Frequency :
2.412GHz ~ 2.472GHz
Support Channel
:
13 Channels
Modulation Skill
:
DBPSK, DQPSK, CCK, OFDM
Power Type
:
Powered by PCMCIA interface of client’ s device
Power Cable
:
None
Data Cable
:
None
Test Method
1. Insert the EUT into the PCMCIA bus of the notebook computer.
2. Using the notebook computer and software provided by the manufacturer to control
EUT, the test is performed under the specific conditions.
3. Then making EUT to the following mode.
(a) EMI testing: During test, making EUT to the linking mode with support equipments
(b) EMS testing: same as above
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 7/45
List of Support Equipment
In order to construct the minimum testing, following equipment were used as the support
units.
Notebook
Model No.
:
:
IBM Think Pad X20
2662-11T
Serial No.
:
FX-1192200/09
FCC ID
BSMI
:
:
N/A, DoC (Declaration of Confirmation) Approved
3892B565
Adaptor
Model No.
Serial No.
FCC ID
Power type
Power cord
:
:
:
:
:
:
IBM
PA2450U
02K6654
N/A, DoC Approved
I/P: 100 ~ 240vac, 50 ~ 60 Hz, 0.5A ~ 1.2A; O/P: 16Vdc, 4.5A
Non-shielded, 1.80m length, Plastic, with ferrite core
Fax/Modem
Model No.
Serial No.
FCC ID
Power type
Power Cord
Data Cable
:
:
:
:
:
:
:
Aceex
DM-1414
9010582, 9010583
IFAXDM1414
110 VAC / 50 ~ 60 Hz, Switching
Non-shielded, 1.90m long, Plastic hoods, and no ferrite bead
RS-232ШShielded, 1.30m long, Metal hoods , No bead
RJ-11Cx2ШNon-shielded, 7’ long, Plastic hoods, No bead
Printer
:
EPSON; HP
Model No.
:
B241A, C2642A
Serial No.
:
FAPY155090, SG69A196GV
FCC ID
:
None (DoC Approved), B94C2642X
BSMI
:
R33126, None
Power type
:
Switching adaptor
Power cord
:
Non-shielded, 173cm length, No ferrite core
(between adaptor and AC source)
Non-shielded, 180cm length, with ferrite core
(between printer and adaptor)
Data cable
:
Shielded, 1.70m length, No ferrite core
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 8/45
USB Game pad :
Padix, Rockfire
Model No.
Serial No.
:
:
QF-305u, QF-337uv
81100848, KR91379759
FCC ID
:
DoC Approved, None (CE approval)
BSMI
:
None, 3862A574
Power type
:
By PC
Data cable
:
Shielded, 1.76m length no ferrite core (1.81m with ferrite core)
Mouse
Model No.
Serial No.
FCC ID
BSMI
Power type
Power cord
:
:
:
:
:
:
:
HP
M-UR89, M-S34
LZS21750238, LZC84446151
DoC Approved, DZL211029
3892D767, 4862A011
By PC
Shielded, 1.80m length, No ferrite core
Notebook PC
:
Twinhead
Model No.
:
N222S
Serial No.
:
SY3261000988
FCC ID
:
DoC (Declaration of Confirmation) Approved
BSMI
:
71001018
Power adaptor
:
LI Shin International Enterprise Corp.
Model No.
:
LSE9802A2060
Serial No.
:
A20231065818
FCC ID
:
DoC Approved
BSMI
:
3882B381
Power type
:
100 ~ 240VAC / 50 ~ 60Hz, 1.5A, Switching
Power cord
:
Non-shielded, 1.0m length, Plastic hood, No ferrite core
(Main power to adaptor)
Shielded, 1.5m length, Plastic hood, ferrite core
(DC plug to adaptor)
WLAN Card
Model No.
FCC ID
:
:
:
Gemtek Technology Co., Ltd.
C911003
MXF-C911003
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 9/45
Chapter 2
Emission and Immunity Requirements Overview
Emission (ETSI EN 301 489-1)
Phenomenon
Application
Equipment test requirement
Reference
Subclause in
the present
Radio and
Radio and
Radio and
ancillary
ancillary
ancillary
equipment for
fixed use (base
equipment for
vehicular use
equipment for
portable use
station
(mobile
(portable
equipment)
Applicable for
stand alone
testing
equipment)
Applicable for
stand alone
testing
equipment)
Applicable for
stand alone
testing
Applicable
Not applicable
8.3
document
Radiated
emission
Enclosure of
ancillary
equipment
Conducted
emission
DC power
input/output
port
Applicable
Conducted
emission
AC mains
input/output
port
AC mains
input port
Applicable
Not applicable Not applicable
8.4
Applicable
Not applicable Not applicable
8.5
Applicable
Not applicable Not applicable
8.6
Harmonic
current
emissions
Voltage
fluctuations
and flicker
AC mains
input port
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
8.2
Test Report ------------------------------------------------------------------------------- 10/45
Immunity (ETSI EN 301 489-1)
Phenomenon
Application
Equipment test requirement
Reference
Radio and Subclause in
the present
ancillary
equipment for equipment for equipment for document
fixed use (base vehicular use portable use
(portable
station
(mobile
equipment)
equipment) equipment)
Radio and
ancillary
Radio and
ancillary
Applicable
Applicable
Applicable
9.2
Electrostatic
Enclosure
discharge
Fast transients
Signal,
common mode telecommunication
and control ports,
DC and AC power
ports
Applicable
Applicable
Applicable
9.3
Applicable
Not
applicable
Not
applicable
9.4
RF common
Signal,
mode 0.15 MHz telecommunication
to 80MHz
and control ports,
DC and AC power
ports
Applicable
Applicable
Not
applicable
9.5
Not applicable
Applicable
9.6
Applicable
Not
applicable
Not
applicable
Not
applicable
Applicable
Not
applicable
Not
applicable
RF
electromagnetic
field ( 80MHz to
1GHz)
Enclosure
Transients and DC power input
surges
ports
Voltage dips and AC mains power
interruptions
input ports
Surges, line to AC mains power
line and line
input ports,
ground
telecommunication
ports
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
9.7
9.8
Test Report ------------------------------------------------------------------------------- 11/45
Chapter 3
Performance Criteria
ETSI EN 301 489-17, Subclause 6.2
Table 1 Performance criteria
Criteria
During test
After test
A
Shall operate as intended
Shall operate as intended
B
C
May show degradation of
Shall be no degradation of performance
performance (NOTE 1)
Shall be no loss of function
Shall be no unintentional
transmissions
May show loss of function (one or
more)
May show degradation of
performance (NOTE 1)
No unintentional transmissions
(NOTE 2)
Shall be no loss of function
Shall be no loss of stored data or user
programmable functions
Function shall be self-recoverable
Shall operate as intended after recovering
Shall be no degradation of performance
(NOTE 2)
Shall be no loss of stored data or user
programmable functions
May be loss of function (one or
more)
Functions shall be recoverable by the
operator
Shall operate as intended after recovering
Shall be no degradation of performance
(NOTE 2)
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 12/45
NOTE 1:
Degradation of performance during the test is understood as a degradation to a level not
below a minimum performance level specified by the manufacturer for the use of the apparatus
as intended. In some cases the specified minimum performance level may be replaced by a
permissible degradation of performance.
If the minimum performance level or the permissible performance degradation in not
specified by the manufacturer then either of these may be derived from the product description
and documentation (including leaflets and advertising) and what the user may reasonably expect
form the apparatus if used as intended.
NOTE 2:
No degradation of performance after the test is understood as no degradation below a
minimum performance level specified by the manufacturer for the use of the apparatus as
intended. In some cases the specified minimum performance level may be replaced by a
permissible degradation of performance. After the test no change of actual operating data or user
retrievable data is allowed.
If the minimum performance level or the permissible performance degradation in not
specified by the manufacturer then either of these may be derived from the product description
and documentation (including leaflets and advertising) and what the user may reasonably expect
form the apparatus if used as intended.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 13/45
ETSI EN 301 489-1
Performance criteria for Continuous phenomena applied Transmitters (CT)
If no further details are given in the relevant part of the present document dealing with the
particular type of radio equipment, the following general performance criteria for continuous
phenomena shall apply.
During and after the test:
The apparatus shall continue to operate as intended. No degradation of performance or loss
of function is allowed below a permissible performance level specified by the manufacturer
when the apparatus is used as intends. In some cases this permissible performance level may
be replaced by a permissible loss of performance.
During the test:
The EUT shall not unintentionally transmit or change its actual operating state and stored
data. If the minimum performance level or the permissible loss is not specified by the
manufacturer, then either of these may be deduced from the product description and
documentation and what the user may reasonably expect form the apparatus if used as
intended.
For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause
6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or
transmitter in which case the corresponding performance criteria above shall apply.
Performance criteria for Transient phenomena applied Transmitters (TT)
If no further details are given in the relevant part of the present document dealing with the
particular type of radio equipment, the following general performance criteria for transient
phenomena shall apply.
After the test:
The apparatus shall continue to operate as intended. No degradation of performance or loss
of function is allowed below a permissible performance level specified by the manufacturer
when the apparatus is used as intends. In some cases this permissible performance level may
be replaced by a permissible loss of performance.
During the test:
The EMC exposure to an electromagnetic phenomenon, a degradation of performance is,
however, allowed. No change of the actual mode of operation (e.g. unintended transmission)
or stored data is allowed.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 14/45
If the minimum performance level or the permissible loss is not specified by the
manufacturer, Then either of these may be deduced from the product description and
documentation and what the user may reasonably expect form the apparatus if used as
intended.
For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause
6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or
transmitter in which case the corresponding performance criteria above shall apply.
Performance criteria for Continuous phenomena applied Receivers (CR)
If no further details are given in the relevant part of the present document dealing with the
particular type of radio equipment, the following general performance criteria for continuous
phenomena shall apply.
During and after the test:
The apparatus shall continue to operate as intended. No degradation of performance or loss
of function is allowed below a permissible performance level specified by the manufacturer
when the apparatus is used as intends. In some cases this permissible performance level may
be replaced by a permissible loss of performance.
During the test:
The EUT shall not unintentionally transmit or change its actual operating state and stored
data. If the minimum performance level or the permissible loss is not specified by the
manufacturer, then either of these may be deduced from the product description and
documentation and what the user may reasonably expect form the apparatus if used as
intended.
For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause
6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or
transmitter in which case the corresponding performance criteria above shall apply.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 15/45
Performance criteria for Transient phenomena applied Receivers (TR)
If no further details are given in the relevant part of the present document dealing with the
particular type of radio equipment, the following general performance criteria for transient
phenomena shall apply.
After the test:
The apparatus shall continue to operate as intended. No degradation of performance or loss
of function is allowed below a permissible performance level specified by the manufacturer
when the apparatus is used as intends. In some cases this permissible performance level may
be replaced by a permissible loss of performance.
During the test:
The EMC exposure to an electromagnetic phenomenon, a degradation of performance is,
however, allowed. No change of the actual mode of operation (e.g. unintended transmission)
or stored data is allowed.
If the minimum performance level or the permissible loss is not specified by the
manufacturer, then either of these may be deduced from the product description and
documentatio n and what the user may reasonably expect form the apparatus if used as
intended.
For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause
6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or
transmitter in which case the corresponding performance criteria above shall apply.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 16/45
ETSI EN 301 489-17
Performance criteria for Continuous phenomena applied Transmitters (CT)
The performance criteria A shall apply.
Tests shall be repeated with the EUT in standby mode (if applicable) to ensure that
unintentional transmission does not occur. In systems using acknowledgement signals, it is
recognized that an ACKnowledgement (ACK) or Not ACKnowledgement (NACK) transmission
may occur, and steps should be taken to ensure that any transmission resulting from the
application of the test is correctly interpreted.
Performance criteria for Transient phenomena applied Transmitters (TT)
The performance criteria B shall apply, except for voltage dips of 100ms and voltage
interruptions of 5000 ms duration, for which performance criteria C shall apply.
Tests shall be repeated with the EUT in standby mode (if applicable) to ensure that unintentional
transmission does not occur. In system using acknowledgement signals, it is recognized that an
acknowledgement (ACK) or not-acknowledgement (NACK) transmission may occur, and steps
should be taken to ensure that any transmission resulting from the application of the test is
correctly interpreted.
Performance criteria for Continuous phenomena applied Receivers (CR)
The performance criteria A shall apply.
Where the EUT is a transceiver, under no circumstances, shall the transmitter operate
unintentionally during the test. In systems using acknowledgement signals, it is recognized that
an ACK or NACK transmission may occur, and steps should be taken to ensure that any
transmission resulting from the application of test is correctly interpreted.
Performance criteria for Transient phenomena applied Receivers (TR)
The performance criteria B shall apply, except for voltage dips of 100ms and voltage
interruptions of 5000 ms duration, for which performance criteria C shall apply.
Where the EUT is a transceiver, under no circumstances, shall the transmitter operate
unintentionally during the test. In systems using acknowledgement signals, it is recognized that
an ACK or NACK transmission may occur, and steps should be taken to ensure that any
transmission resulting from the application of test is correctly interpreted.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 17/45
Chapter 4
Electrostatic Discharges Immunity Test
ESD Test information:
Test setup: Shielded room, According to EN 61000-4-2
Test setup for table-top equipment at laboratory tests:
Typical position for
indirect discharge to VCP
Typical position for
indirect discharge
Typical position for
indirect discharge to HCP
VPC
0.5m X 0.5m
Insulation
Horizontal coupling place
1.6m X 0.8m
Power Supply
0.1 m
Wooden table H=0.8m
470kohm
Resistor
Ground Reference Plane
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 18/45
Test levels: (Apply Level 2 and Level 3)
1a — Contact discharge
Level
Test voltage
1b — Air discharge
Level
Test voltage
(kV)
(kV)
1
2
1
2
2
3
4
6
2
3
4
8
4
8
4
15
X
Special
X
Special
NOTE: “X” is an open level. The level has to be specified in the dedicated equipment specification. If
higher voltages than those shown are specified, special test equipment may be needed.
( X ) 4KV contact discharge
( X ) 8KV air discharge
Indirect Discharges: ( X ) HCP
( X ) VCP
Polarity:
( X ) Positive
( X ) Negative
Test Voltage:
Test mode: Refer to Test method of Chapter 1
Test instruments:
Name
Best Plus BURST ESD
SURGE TRANSIENTS
BEST EMC Test
Instrument
Model Number
Best Plus V6.2
Serial Number
199749-019SC
BEST EMC V2.3
(-8, -9)
199918-006SC
SCHAFFNER EMV
AG
NSG 438
INA 4380
253
Selected
X
Comment:
Performance Criteria: (According to ETSI EN 301 489-1)
( X ) Enclosure
( ) Signal and control ports
( )CT
( )CT
( X )TT
( )TT
( ) CR
( ) CR
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
( X )TR
( )TR
Test Report ------------------------------------------------------------------------------- 19/45
EN 61000-4-2 PHOTO OF TEST SET-UP
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 20/45
Chapter 5
Radio Frequency Immunity Test (RS)
RS Test information:
Test setup: GTEM cell
Radiated Immunity Test Setup
Model 7122
Isotropic Probe
High Power
Amplifier
GTEM Cell
EUT
Signal
Generator
EUT Performance
Monitor
Model 7122 Companion
Metering Unit
Modulation
Generator
Model 7110 Data
Processing / Interface Unit
Test levels: (Apply Level 2)
Level
Test Field Strength
(V/m)
1
1
2
3
3
10
X
Special
NOTE: the “X” is an open test level. This level may be given in the product specification.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 21/45
Field strength: ( X ) 3V/m at 80 ~ 1000 MHz
Modulation:
( X ) 3V/m at 1400 ~ 2000 MHz
( ) FM
%
( X ) 80% AM Modulation with 1KHz
( ) 80% AM Modulation with 400Hz when signal is modulated at 1kHz
( ) 900 KHz²5 KHz with PM 200 Hz and 100% depth
Step size:
Sweep time:
( X ) 1% step size
( X ) 2.5 Second
Test mode:
Ref. Test method of Chapter 1
Test instruments:
Name
EMCO GTEM
Model Number
5317
Serial Number
9411-1123
Selected
X
EMCO Probe
7122
9406-1194
X
EMCO METERING UNIT
7122
9406-1194
X
EMCO data interface
HP Personal Computer
7110
D3178A
9410-1273
3438S00486
X
X
HP Signal Generator
8657B
2928U00286
X
HP Signal Generator
IFI Wideband Amplifier
83711A
SMX50
3429A00434
467-0795
X
X
Min-circuit Amplifier
GFL-2500VH
N/A
X
WG radiation meters
WG E- filed
EMC-20
2244 / 90.20
BN2244129
Z-0001
X
X
HP Transmission Test Set
4935A
3115A24046
X
B & K Precision Sound Level Meter
Type 2232
1810564
X
Comment:
Performance Criteria: (According to ETSI EN 301 489-1)
( X ) Enclosure
( X )CT
( )TT
( X ) CR
( )TR
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 22/45
EN 61000-4-3 PHOTO OF TEST SET-UP
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 23/45
Chapter 6
Electric Fast Transient/Burst Requirements Test
EFT Test information:
General test set-up for laboratory type tests:
> 0.25 m
> 0.25 m
> 0.25 m
> 0.25 m
EUT
(L)
(L)
EUT
AC mains
supply
Capacitive
coupling clamp
AC mains
supply
EUT
EUT
0.1 m
0.1 m
Insulating
support
Reference
plane
EFT/Bgenerator (B)
Grounding connection
according to the
manufacturer’ s
specification.
Length to be specified
in the test plan.
Non-metallic
table
EFT/Bgenerator
(L) = length between clamp and EUT to be tested, should
not be more than 1-meter
(A) = location for supply line coupling
(B) = location for signal lines coupling
Coupling / decoupling
network (A)
Reference
plane
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 24/45
Test levels: (Apply Level 2)
Open-circuit output test voltage (±10%) and repetition rate of the impulses (±20%)
On power supply port, PE
On input/output signal, data and
Level
control ports
Voltage peak
Repetition rate
Voltage peak
Repetition rate
kV
kHz
kV
kHz
1
2
0.5
1
5
5
0.25
0.5
5
5
3
2
5
1
5
4
X
4
Special
2.5
Special
2
Special
5
Special
NOTE: the “X” is an open level. The level has to be specified in the dedicated equipment specification
Test setup: According to EN 61000-4-4
Test Voltage:
DC Power line
( ) 0.5 KV, 5 KH
AC Power line
( X ) 1 KV, 5 KHz
Signal & Control line ( ) 0.5 KV, 5 KHz; ( ) 1 KV, 5 KHz
Polarity:
( X ) Positive
( X ) Negative
Test Duration:
( X ) 1 minute
( ) 3 minutes
Connected lines: ( ) Power line shielded
( X ) Power line non-shielded
( ) Signal & Control line non-shielded
( ) Signal & Control line shielded
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 25/45
Test mode: Ref. Test method of Chapter 1.
Test instrument:
Name
Model Number
Best Plus BURST ESD Best Plus V6.2
Serial Number
199749-019SC
SURGE TRANSIENTS
BEST EMC Test
BEST EMC V2.3
199918-006SC
Instrument
(-8, -9)
KeyTek Instrument
EFT Test system
E412
Selected
9505206/505207
X
Comment:
Performance Criteria: (According to ETSI EN 301 489-1)
( ) DC power input ports
( )CT
( )CT
( )TT
( )TT
( ) CR
( ) CR
( )TR
( )TR
( X ) AC mains input ports
(
( X )TT
( ) CR
( X )TR
( ) Signal and control ports
)CT
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 26/45
EN 61000-4-4 PHOTO OF TEST SET-UP
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 27/45
Chapter 7
Surge Immunity Test
Surge Test information:
Test setup:
According to EN 61000-4-5
Test levels: (Apply Level 2 and Level 3)
Level
Test Field Strength
(kV)
1
0.5
2
3
1.0
2.0
4
4.0
X
Special
NOTE: the “X” is an open class. This level may be specified in the product specification.
Test Voltage:
DC Power line ( ) 0.5 KV
AC Power line ( ) Line – Line: 1KV
( ) Line – Ground: 2KV
( X ) Line – Line: 0.5KV
( X ) Line – Ground: 1KV
Control line
( ) 0.5 KV
Signal
( ) 1 KV, ( ) 0.5KV
Time:
( X ) 1.2/50µs [8/20µs]
Polarity:
( X ) Positive
( X ) Negative
Connected lines: ( ) Power line shielded
( X ) Power line non-shielded
( ) Signal & Control line non-shielded
( ) Signal & Control line shielded
Test mode: Ref. Test method of Chapter 1.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 28/45
Test instrument:
Name
Model Number
Best Plus BURST ESD Best Plus V6.2
Serial Number
199749-019SC
SURGE TRANSIENTS
BEST EMC Test
BEST EMC V2.3
199918-006SC
Instrument
(-8, -9)
KeyTek Pulsed-EMI
Test System
E103, 501B, E502B,
E503, E505A,
E4552A
0008260 ~0008264,
0008254
Selected
X
Comment:
Performance Criteria: (According to ETSI EN 301 489-1)
( X ) AC mains input ports
( ) Signal and control ports
( )CT
( )CT
( X )TT
( )TT
( ) CR
( ) CR
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
( X )TR
( )TR
Test Report ------------------------------------------------------------------------------- 29/45
EN 61000-4-5 PHOTO OF TEST SET-UP
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 30/45
Chapter 8
Continuous Wave Voltage Immunity Test
CS Test information:
Test setup: According to EN 61000-4-6
Immunity test to RF conducted disturbances:
CDN: Coupling and
decoupling network
Auxiliary
equipment 1
CDN
Equipment
under test
Auxiliary
equipment 1
CDN
0.1 m
support
Ground reference plane
T
T2: Power attenuator
(6dB)
T: Termination 50ohm
T2
RF — generator
Test generator
Test levels:
(Apply Level 2)
Frequency range 150kHz to 80MHz
Level
Voltage level (e.m.f.)
1
Uo [dB(µv)]
120
Uo [V]
1
2
130
3
3
X
140
10
Special
NOTE: the “X” is an open test level.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 31/45
Test Frequency:
( X ) 0.15 ~ 80MHz
Modulation:
( ) FM %
( X ) 80% AM Modulation with 1kHz
( ) 80% AM Modulation with 400Hz when signal is modulated at 1kHz
( ) 900 MHz²5 MHz with PM 200 Hz and 50% duty cycle
Step size:
( ) Performed over the frequency range 150kHz to 80MHz with the
exception of an exclusion band for transmitters, and for receivers and
duplex transceivers
( X ) For receivers and transmitters the stepped frequency increments shall
be 1% frequency increment of the momentary frequency in the
frequency range 150kHz to 80MHz, unless specified otherwise in the
part of EN 301 489 dealing with the particular type of radio equipment
Field strength:
( ) 1Vrms
( X ) 3Vrms
( ) 10Vrms
Connected lines:
( ) Power line shielded
( X ) Power line non-shielded
( ) Signal & Control line non-shielded
( ) Signal & Control line shielded
Test mode: Ref. Test method of Chapter 1
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 32/45
Test instruments:
Name
FRANKONIA EMV–Mess–
System
FRANKONIA CDN
Model Number
CIT-10
Serial Number
103A3113
Selected
X
M2+M3
A3011015
X
FRANKONIA CDN
T2-801
A3010002
FRANKONIA CDN
FRANKONIA CDN
T4-801
S1-801
A3015004
A3005002
SCHAFFNER FM-Koppelzange
KEMZ 801
17045
SCHAFFNER RF-SYNTHE
SIZERIAMP21FIER
SCHAFFNER CDN
SCHAFFNER CDN
NSG 2070-1
1020
M325
M216
13773
15604
SCHAFFNER CDN
T004
15230
SCHAFFNER CDN
SCHAFFNER FM-Koppelzange
S501
KEMZ 801
15167
14301
HP Transmission Test Set
4935A
3115A24046
B & K Precision Sound Level Meter Type 2232
1810564
Comment:
Performance Criteria: (According to ETSI EN 301 489-1)
( ) Antenna port
( )CT
( )TT
( ) CR
( )TR
( ) Signal and control ports
( )CT
( )TT
( ) CR
( )TR
(
) DC power input ports
( )CT
( )TT
( ) CR
( )TR
( X ) AC mains input ports
( X )CT
( )TT
( X ) CR
( )TR
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 33/45
EN 61000-4-6 PHOTO OF TEST SET-UP
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 34/45
Chapter 9
Voltage DIP / Interruption Test
DIP Test information:
Test setup: According to EN 61000-4-11
Voltage dips :
( X ) 30%, 0.01 Second
( X ) 60%, 0.1 Second
Voltage interruptions: ( X ) > 95%, 5 Seconds
Test mode: Ref. Test method of Chapter 1
Test instruments:
Name
Model Number
Serial Number
Best Plus BURST ESD Best Plus V6.2
SURGE TRANSIENTS
199749-019SC
BEST EMC Test
Instrument
BEST EMC V2.3
(-8, -9)
199918-006SC
Partner EMS Tester
Transienter-1000
PIO
Selected
X
Comment:
Performance Criteria: (According to ETSI EN 301 489-1)
Dips 30%:
( X ) CT
( ) TT
( X ) CR
Dips 60%:
( ) CT
( ) TT
( ) CR
Interruptions >95%: ( ) CT
( ) TT
( ) CR
No unintentional responses shall occur at the end of the test;
( )Event of loss of function(s)
( )Event of loss of user stored data
Performance Criteria: (According to ETSI EN 301 489-17)
Dips 60%, 100 ms :
( ) A
( ) B
Interruptions >95%, 5 000 ms:
( ) A
( ) B
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
( ) TR
( ) TR
( ) TR
(X)C
(X)C
Test Report ------------------------------------------------------------------------------- 35/45
EN 61000-4-11 PHOTO OF TEST SET-UP
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 36/45
Chapter 10
Harmonics Test
Test information:
Test setup:
According to EN 61000-3-2
Test item:
Test mode:
Quasi – stationary & Fluctuating Current Harmonics Test.
Ref. Test method of Chapter 1
Test instrument:
Name
Harmonic/
Flicker Test System
Model Number
HP 6842A
Serial Number
3531A-00102
Test Equipment Settings:
Line Voltage
Quasi-stationary Current
Harmonics Test
230VAC
Fluctuating Current
Harmonics Test
230VAC
Line Frequency
Device Class
50Hz
D
50Hz
D
Test Limit Overrides
None
None
Total Number of Failures:
None
None
Total Number of Errors:
None
None
Test Result: Pass
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Selected
X
Test Report ------------------------------------------------------------------------------- 37/45
Chapter 11 Voltage Fluctuation and Flicker Test
Test information:
Test setup:
According to EN 61000-3-3
Test mode:
Ref. Test method of Chapter 1
Test instrument:
Name
Model Number
Harmonic/Flicker Test HP 6842A
System
Serial Number
3531A-00102
Selected
X
Test Equipment Settings:
Line Voltage
Line Frequency
230VAC
50Hz
Test Limit Overrides
None
Total Number of Failures:
Pst: (0), Plt: (0)
Dc: (0), Dmax (0), Dt (0)
Total Number of Errors:
None
Test Result: Pass
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 38/45
Chapter 12 Conducted Emission Test
Test condition and setup
All the equipment is placed and setup according to EN 55022.
Mains power:
The EUT is assembled on a wooden table, which is 80 cm high and placed 40 cm from the
back-wall, which is a vertical conducting plane. One LISN is for EUT, the other LISN is for
support equipment. They are all placed on the conductive ground. The EUT’ s LISN connect a
line switch box for selecting L1 or L2, then connect to a preamplifier and spectrum.
The spectrum scans from 150KHz to 30MHz. Conducted emission levels are detected at
maximum peak mode. But if the maximum peak mode failed or over average limit, it will be
measured by average detection mode.
While testing the worst-emission plot printed in the peak detection mode, and there are up
to 6 highest emissions to be recorded. The plot is kept as the original data and not included in the
test report.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 39/45
List of test Instrument
Calibration Date
Instrument Name
Model
Brand
Serial No.
Next time
EMI Receiver
8546A
HP
3520A00242
08/05/05
RF Filter Section
85460A
HP
3448A00217
08/05/05
LISN
LISN-01
TRC
99-05
10/07/05
LISN-01
TRC
9912-03, 04
11/04/05
15542 ZFL-500
Mini –
0 0117
05/20/05
Mini –
9915 –
05/20/05
Circuits
Conducted
Mini –
0215 –
Circuits
Conducted
A30A30-0058-50FS-2M
Jyebao
SMA-08
05/20/05
A30A30-0058-50FS-1M
Jyebao
SMA-09
05/20/05
RG-214/U
Jyebao
NP-01
05/20/05
RG-214/U
Jyebao
NP-02
05/20/05
ASB-01
TRC
9904-01
05/20/05
(EUT)
LISN
(Support E.)
Pre-amplifier
Circuits
6dB
MCL BW-S6W2
Attenuator
10dB
A5542 VAT010
Attenuator
Coaxial Cable
05/20/05
(2 meter)
Coaxial Cable
(1.1 meter)
Coaxial Cable
(20 meter)
Coaxial Cable
(20 meter)
Auto Switch Box
(< 30MHz)
The level of confidence of 95%, the uncertainty of measurement of conducted emission is +2.43dB / -2.53dB.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 40/45
Conducted Test Placement (Front view and Side view)
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 41/45
Test Result of Conducted Emissions for Mains power
Testing room :
Temperature : 25 ° C
Humidity : 73 % RH
Line 1
READING AMPLITUDE
Frequency
(kHz)
LIMIT
Peak
Quasi-Peak
Average
Quasi-Peak
Average
(dBµV)
(dBµV)
(dBµV)
(dBµV)
(dBµV)
Margin
(dB)
220.000
43.68
---
---
64.00
54.00
-10.32
884.000
42.16
---
---
56.00
46.00
-3.84
1208.000
39.52
---
---
56.00
46.00
-6.48
1766.000
42.16
---
---
56.00
46.00
-3.84
2094.000
40.79
---
---
56.00
46.00
-5.21
2741.000
41.75
---
---
56.00
46.00
-4.25
3304.000
43.39
36.99
32.58
56.00
46.00
-13.42
4131.000
41.37
---
---
56.00
46.00
-4.63
6170.000
40.13
---
---
60.00
50.00
-9.87
7610.000
39.66
---
---
60.00
50.00
-10.34
Line 2
READING AMPLITUDE
Frequency
(kHz)
LIMIT
Peak
Quasi-Peak
Average
Quasi-Peak
Average
(dBµV)
(dBµV)
(dBµV)
(dBµV)
(dBµV)
Margin
(dB)
329.000
42.41
---
---
60.89
50.89
-8.48
884.000
41.47
---
---
56.00
46.00
-4.53
1219.000
40.22
---
---
56.00
46.00
-5.78
1766.000
42.07
---
---
56.00
46.00
-3.93
1977.000
40.96
---
---
56.00
46.00
-5.04
2820.000
40.33
---
---
56.00
46.00
-5.67
4288.000
40.72
---
---
56.00
46.00
-5.28
6270.000
42.64
---
---
60.00
50.00
-7.36
Note:
1. The reading amplitudes are all under limit.
2. Testing result = Amplitude reading + Correction factor (Insertion loss of LISN, Cable loss,
Attenuator, Amplifier and so on)
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 42/45
Chapter 13 Radiated Emission Test
Test condition and setup
Pretest:
Prior to the final test (OATS test), the EUT is placed in a shielded enclosure,
and scan from 30MHz to 1GHz. This is done to ensure the radiation is exactly emitted from the
EUT.
Final test:
Final radiation measurements are made on a 10 – meter, open-field test
site. The EUT is placed on a nonconductive table, which is 0.8m height, the top surface is 1.0 x
1.5 meter. The entire placement is according to EN 55022.
The whole range antenna is used to measure frequency from 30 MHz to 1GHz. The final
test is used the spectrum analyzer (EMI Receiver). Measure more than six top marked
frequencies generated form pretest by computer step by step at each frequency.
The EUT is rotated 360 degrees, and antenna is raised and lowered from 1 to 4 meters to
find the maximum emission levels. The antenna is used with both horizo ntal and vertical
polarization.
Appropriated preamplifier which is made by TRC is used for improving sensitivity and
precautions is taken to avoid overloading .The spectrum analyzer’ s 6dB bandwidth is set to 120
kHz, and the EUT is measured at quasi-peak (below 1GHz) mode.
If the emission is close to the frequency band of ambient, the tester will recheck the data
and the corrected data will be written in the test data sheet. If the emission is just within the
ambient, the data from shielded room will be taken as the final data.
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 43/45
List of test Instrument
Calibration Date
Instrument Name
Model
Brand
Serial No.
Next time
EMI Receiver
8546A
HP
3520A00242
08/05/05
RF Filter Section
85460A
HP
3448A00217
08/05/05
Small Biconical
UBAA9114 &
SCHWARZECK
127
10/11/05
Antenna
BBVU9135
Pre-amplifier
PA1F
TRC
1FAC
05/20/05
Auto Switch Box
ASB-01
TRC
9904-01
05/20/05
A30A30-0058-50FS-15M
JYEBAO
SMA-08
05/20/05
A30A30-0058-50FS-1M
JYEBAO
SMA-02
05/20/05
Receiver
SCR3102
SCHAFFNER
012
05/13/05
Control Box
TWR95-4
TRC
C9001-2
N/A
Antenna
CBL6141A
SCHAFFNER
4206
05/26/05
Pre-amplifier
TRC-CB-2
TRC
CB-002
05/28/05
Coaxial cable
RG-214/U
JYEBAO
Cl-002
05/28/05
BNC31VB-0316
JYEBAO
SMA-02
05/28/05
BNC31VB-0318
JYEBAO
SMA-02
05/28/05
BNC31VB-0316
JYEBAO
SMA-02
05/28/05
BNC31VB-0316
JYEBAO
SMA-02
05/28/05
(>30MHz)
Coaxial Cable
(Double shielded,
15 meter)
Coaxial Cable
(1.1 meter)
(20 meter)
Coaxial Cable
(50 cm)
Coaxial Cable
(1.1 meter)
Coaxial Cable
(1.1 meter)
Coaxial Cable
(1.1 meter)
The level of confidence of 95% , the uncertainty of measurement of radiated emission is +2.85dB / -2.77dB .
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 44/45
Radiated Test Placement (Front view and Rear view)
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Test Report ------------------------------------------------------------------------------- 45/45
Test Result of Spurious Radiated Emissions
Test Conditions:
Testing room :
Temperature : 25 ° C
Humidity : 73 % RH
Testing site :
Temperature : 25 ° C
Humidity : 73 % RH
Radiated Emissions for 30MHz to 1GHz [Horizontal]
Radiated
Emission
Frequency Amplitude Ant. H.
(m)
(MHz)
(dBµ V)
±
Table
( )
Correction
Corrected
Factors
Amplitude
(dB)
Class B
( 10 m )
Limit
(dBµ V/m) (dBµ V/m)
Margin
(dB)
122.8825
26.90
3.57
0
-6.74
20.16
30.00
-9.84
259.9863
35.61
1.38
245
-5.00
30.61
37.00
-6.39
298.4240
33.65
3.06
93
-3.45
30.20
37.00
-6.80
324.9250
36.07
3.15
0
-2.65
33.42
37.00
-3.58
912.8125
23.24
1.95
132
9.85
33.09
37.00
-3.91
Radiated Emissions for 30MHz to 1GHz [Vertical]
Radiated
Emission
Correction
Factors
Frequency Amplitude Ant. H.
(MHz)
(dBµ V)
(m)
±
Table
( )
(dB)
Corrected
Amplitude
Class B
( 10 m )
Limit
(dBµ V/m) (dBµ V/m)
Margin
(dB)
73.9025
32.39
1.00
93
-9.68
22.71
30.00
-7.29
232.8825
29.42
1.00
327
-6.37
23.05
37.00
-13.95
565.8613
19.28
1.00
334
4.45
23.73
37.00
-13.27
649.9663
18.27
2.15
183
4.40
22.67
37.00
-14.33
Note:
1. Margin = Amplitude – limit, if margin is minus means under limit.
2. Corrected Amplitude = Reading Amplitude + Correction Factors
3. Correction factor = Antenna factor + ( Cable loss – Amplitude gain) + Switching box loss
Report No.: C51ET050252 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440
Copy of the R&TTE Declaration of
Conformity (DoC)
Declaration of Conformity
We, the under signed,
Company
Address, City
Country
Phone number
Fax number
E-mail
CAMEO COMMUNICATIONS, INC.
4F, No. 42, Min Chuan E. Rd., Sec. 6, Taipei
Taiwan, R.O.C.
886-2-27908998
886-2-27909463
Jason_Chang@mail.cameo.com.tw
certify and declare under our sole responsibility that the following equipment:
Product Description / Supplementary Info
Manufacturer
Brand
Type
802.11g Wireless PC Card
CAMEO COMMUNICATIONS, INC.
CAMEO, Level One, LG, Etherwan, Allnet GmbH
WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A
is tested to and conforms with the essential radio test suites included in the following standards:
Standard
ETSI EN 300 328
ETSI EN 301 489-1
ETSI EN 301 489-17
EN 60950-1
Issue date
V1.4.1 Apr. 2003
V1.4.1 Aug. 2002
V1.2.1 Apr. 2002
2001
and therefore complies with the essential requirements and provisions of the R&TTE directive
1999/5/EC of the European Parliament and of the council of 9March 1999 on radio equipment and
Telecommunications Terminal Equipment and the mutual recognition of their conformity and the
requirements of Annex IV (conformity Assessment procedure referred to in article 10(4)).
The following Notified Bodies have been consulted in the Conformity Assessment procedure:
Notified Body number
0470
Name and address
Nemko, PO Box 73, Blindern N-0314 Oslo, Norway
The technical documentation as required by the Conformity Assessment procedure is kept at the
following address:
Company
Address, City
Country
Phone number
Fax number
E-mail
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6, Taipei 114,
Taiwan
886-2-27908998
886-2-27909463
Jason_Chang@mail.cameo.com.tw
Draw up in
Date
TAIWAN, R.O.C.
2005/4/27
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Signature & company stamp
Jason Chang /
Wireless Comm. R&D Dept. Manager
Product Quality
Assurance Documents
Declaration of Product Quality Assurance
In accordance with the Conformity Assessment procedure referred to in article 10(3) of R&TTE
Directive 1999/5/EC of the European Parliament and the council of 9 march 1999 on the Radio
equipment and Telecommunication Terminal Equipment and their mutual recognition of their conformity
(R&TTE directive) the following manufacture:
Company
Address, City
Country
Phone number
Fax number
E-mail
CAMEO COMMUNICATIONS, INC.
6F, NO. 22, Chung Shin Rd., Hsi-Chih,
Taipei 221, Taiwan
886-2-26499800
886-2-26499984
Jason_Chang@mail.cameo.com.tw
declares under its sole responsibility that it had taken the following measures in order to achieve that
the manufacturing process ensures compliance of the manufactured products with the technical
documentation as established by CAMEO COMMUNICATIONS, INC.. under the requirements of the
R&TTE directive and with the requirements of R&TTE directive that apply to them:
Number
01
Measures taken in order to achieve that the manufacturing process ensures
compliance of the manufactured products
Manufacturing of the equipment is subcontracted by CAMEO
COMMUNICATIONS, INC. to CAMEO COMMUNICATIONS, INC. located at 6F,
NO. 22, Chung Shin Rd., Hsi-Chih, Taipei 221, Taiwan. who is ISO 9001 certified
for development, production and distribution of radio products. (See copy of ISO
9001 certification attached)
Draw up in
Date
TAIWAN, R.O.C.
2005/4/27
CAMEO COMMUNICATIONS, INC.
No. 42, Min Chuan East Road, Section 6,
Taipei 114, Taiwan
Signature & company stamp
Jason Chang /
Wireless Comm. R&D Dept. Manager
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2005:04:29 06:45:37Z Modify Date : 2005:05:03 18:42:38+08:00 Page Count : 139 Creation Date : 2005:04:29 06:45:37Z Mod Date : 2005:05:03 18:42:38+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : Weng1 Metadata Date : 2005:05:03 18:42:38+08:00 Creator : Weng1 Title : Microsoft Word - C51ET050252 TCFForm.doc Has XFA : NoEXIF Metadata provided by EXIF.tools