C51ET050252 TCFForm 501668 CE Report Linktek

501668 Fcc Report Linktek 501668_FCC__report--Linktek 501668_FCC__report--Linktek CertsReports 501668 ProductFiles assets.mhint

: Pdf 501668 Ce Report Linktek 501668_CE__report--Linktek CertsReports 501668 ProductFiles

Open the PDF directly: View PDF .
Page Count: 139 [warning: Documents this large are best viewed by clicking the View PDF Link!]

APPLICATION FORM

We hereby order examination by Nemko as specified below. When the order is received, Nemko will provide an Order Confirmation

which, together with the signed Application Form, will constitue a binding agreement between the applicant and NEMKO. The

appropriate conditions are described overleaf.

APPLICANT

Name and address

Cameo Communications, Inc

No. 42, Min Chuan East Road, Section 6, Taipei 114,

Taiwan

Our reference./ contact person: Mr. Jason Chang

Possible other invoice reference:

TRAINING RESEARCH CO., LTD.

Phone: 886-2-2693-5155 ext.32

Fax/E-mail: 886-2-2693-4440 /

jack@trclab.com.tw

MANU-

FACTURER

(if different from

the applicant)

Name and address

Cameo Communications, Inc

6F, NO. 22, Chung Shin Rd., Hsi-Chih, Taipei 221, Taiwan

FACTORY/

PROD. SITE

(if different from

the manufacturer)

Name and address

PRODUCT

CATEGORY 802.11g Wireless PC Card

MARKING ON

THE PRODUCT Model/type: WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A

Data:

Other specification: 802.11g Wireless PC Card

Name/trade mark/logo *) CAMEO, Level One, LG, Etherwan, Allnet GmbH

THE ORDER

COMPRISES

⌧ New order  Repeated examination, please indicate previous Nemko Order No.:

...................................

 Complete Nemko product certificate *)

 Nordic Certification Service *) for:  Denmark  Finland  Sweden  Iceland *)

 Testing for European certification (CCA), relevant countries: *)

 Testing for international certification (CB), relevant countries: *)

 Statement of conformity with standard for one product sample *)

 Test report according to the following standards/specifications:

 Attestation of conformity with:  The EMC-Directive  Other relevant Directives *)

⌧ Other: *) Conformity assessment for letter of opinion R&TTE Directive

SUBMITTED/

ENCLOSED

 Test sample(s)  Extra components ⌧ Declaration of Identity *) ⌧ Test report(s) from others

⌧ Wiring/circuit diagram(s) ⌧ Part list ⌧ Drawing(s)  Certificate(s) from others

⌧ User’s instruction  Mounting instruction ⌧ EMC test report  Self declaration (conformity

 List of applicant(s)/contact(s) in secondary countries for Nordic Certification Service *) with the EMC Directive)

⌧ Other: See attached TCF

SPECIAL

INFORMATIO

N

Test sample(s)

after examination::  Collected by applicant 1)  To be discarded by Nemko  Returned at applicant’s cost

Completed Questionnaire

on Production surveillance *)  Enclosed  Submitted previously  Will be forwarded

Power of Attorny *)  Enclosed  Submitted previously  Will be forwarded

Certificate desired in:  English  Norwegian  Other *

Delivery of result:  By mail  Preliminary by fax *)  By courier express service *

Remarks:

We recognize and accept the technical, commercial and legal conditions described overleaf, as far as these are applicable to the specified assignment.

The undersigned is authorized to sign on behalf of the applicant.

2005/4/27 Cameo Communications, Inc (Jason Chang / Wireless Comm. R&D Dept. Manager)

Date Binding on the applicant

*) Confer separate Guidance 1) Will be discarded by Nemko if not collected or notice given within 4 weeks after dispatch of the Return

Notice. The same applies if not ticked in any of the boxes for “Test sample(s) after examination”.

APPLICATION FORM - R&TTE APPENDIX

We hereby order Notified Body assessment by Nemko as specified below. When the order is received, Nemko will provide an Order Confirmation, which together with the

signed Application Form, will constitue a binding agreement between the applicant and Nemko.

APPLICANT

Name and address

Cameo Communications, Inc

No. 42, Min Chuan East Road, Section 6, Taipei 114, Taiwan

PRODUCT Category Model/type

802.11g Wireless PC Card WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A

RADIO

TECHINCAL

Frequency range

Range Harmonized

2412 to 2472 MHz YES

Channels Number Separation

13 5MHz

Output power 802.11b: 78.01 mW (e.i.r.p.)

802.11g: 40.30 mW (e.i.r.p.)

Modulation DBPSK / DQPSK / CCK / OFDM

Type of antenna Patch

TCAM

(if applicable)

Category

USAGE Intended use Operating environment Portability

RESIDENTIAL PORTABLE

THE ORDER

COMPRISES

R&TTE Directive – Module Aa (Annex III) – Radio test suite assessment

(NB issues a radio test suite proposal)

R&TTE Directive – Module Aa+ (Annex IV) – TCF assessment

(NB issues an opinion based on examination of the technical construction file (TCF) presented by the applicant)

R&TTE Directive – Module H (Annex V) – Full quality assessment

(NB verifies the quality system and the requirements for periodic control of test suites)

Remarks:

OTHER Similar applications have been submitted to other Notified Bodies (must be listed on separate letter)

Nemko is supposed to do assessments of the quality system

Nemko is supposed to do annual production surveillance

SUBMITTED

DOCUMENTS

Safety test report (3.1a) Technical specifications User documentation

MPE calculation (3.1a) Principle diagrams Service documentation

EMC test report (3.1b) Block diagrams ISO 9000 certificates

Radio test report (3.2) Circuit diagrams Quality manual

CEPT radio application Part lists Methods for periodic control

List of standards Component lists

Declaration of Conformity Sample of the product

STANDARDS

APPLIED

Art.3.1a Art.3.1b Art.3.2 Art.3.3

EN60950-1: 2001 EN 301 489-1 V1.4.1

EN 301 489-17 V1.2.1

EN 300 328 V1.4.1

REMARKS

This appendix supports the information given in the Nemko application form. The same conditions apply. The undersigned is authorized to sign on behalf of the applicant.

2005/4/27

Date

Cameo Communications, Inc

(Jason Chang / Wireless Comm. R&D Dept. Manager)

Binding on the applicant

Nemko's general terms of agreement for testing and certification of equipment

1.

1.1

1.1.1

1.1.2

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2.

2.1

2.2

2.3

GENERAL

The terms of this agreement govern the relation between the party applying for

testing/evaluation and/or certification of equipment (the Applicant), the party

responsible for design, production and quality assurance of the equipment or

marks the equipment as its (the Manufacturer) and Nemko performing the

services.

If the order is to lead to certification, then part 1., 2. and 3. of these terms shall

apply. The Applicant to be the Manufacturer or a physical or juridical person

appointed by the Manufacturer.

Should the Applicant not be identical with the Manufacturer in such cases, the

order shall be carried out only if the Manufacturer, on a form set by Nemko

(Power of Attorny), declares that he is aware of and agrees that the Applicant

gives Nemko the task of carrying out the certification of the equipment in

question and that he accepts the obligations that these terms impose on the

Manufacturer. (items 1.2, 3.2.1, 3.2.4, 3.2.6, 3.2.7, 3.3, 3.4.2).

If the order is to lead to issuing of a test report or another document only

giving statement concerning the tested sample, part 1., 2. of these terms shall

apply. Nemko is carrying such orders regardless of who the Applicant is, and

shall in this connection solely cooperate with the Applicant concerned.

The general terms are as follows:

The Applicant is obliged to pay Nemko for the performing of the agreed order

in accordance with the at all times current Nemko prices. For certificates this

also includes payment of an annual licence fee for the right to use the

certificate and for the right to use Nemko's name or certification mark. The

Applicant is obliged to pay for for the work performed with the purpose of

issuing a certificate, even if such document cannot be issued, whether being

due to the tested sample, the Manufacturer or the Applicant.

Regarding orders which are to result in issuing of a certificate, Nemko may

permit that the obligation to pay totally or partly is transferred from the

Applicant to the Manufacturer, provided this is satisfactory documented

towards Nemko.

Payment to take place in accordance with invoices and their terms of payment.

Nemko may require payment in advance. I such case the balance will be

settled upon completion of the order. Other terms of delivery will be as

described in connection with confirmation for the individual order.

The Nemko staff is bound to observe professional secrecy, not disclosing any

confidential information received in connection with the order. According to

Norwegian law, the professional secrecy may be set aside in case of lawsuit in

Norwegian Court. Nemko is also obliged to ensure that other co-operating

bodies that might deal with the order, instruct their staff to observe the

equivalent professional secrecy.

Nemko's decision may be appealed to Nemko's Appeal Committee, which

deals with the appeal in accordance with Nemko's appeal procedure. An appeal

in writing must be received by Nemko within 3 weeks from the time the

Applicant has received Nemko's written decision.

Any dispute that might occur regarding these terms, one should primarily try

to resolve by negotiations between the parties. If this fail to succeed, the

dispute should be decided by the ordinary courts, unless the parties agree to

arbitration. Any dispute to be settled in accordance with Norwegian law. Legal

venue is City of Oslo Stipendiary Magistrate's Court.

Nemko's Board has at any time the right to revise the present terms.

Alterations of the terms are only applicable for orders commenced 3 - three -

weeks after Nemko's Board having approved the alterations concerned.

The rights to a certificate devolve on the Manufacturer, provided that the

Applicant does not produce evidence that it is agreed with the Manufacturer

that such rights are to pass to the Applicant.

The rights to a test report or any other document concerning the tested sample

only, devolve on the Applicant.

Nemko has no liability for errors made in connection with the performance of

the order except for errors due to purpose or gross negligence on Nemko's

side. Nor has Nemko any liability for indirect losses, cfr. Norwegian Sale of

Goods Act § 67 (2).

The present terms are binding on the Applicant as from the moment he has

signed the Application form,and when appliable, for the Manufacturer when a

Power of Attorny as mentioned under item 1.1.1 is signed.

These terms are issued in an English and a Norwegian version. In case of

differencies in the wording, the Norwegian version shall apply and the

Norwegian version will supersede the English version.

TESTING/EVALUATION

Nemko carries out testing/evaluation of equipment according to valid standard

or other agreed specification. Nemko reserves the right, in exceptional cases,

to subcontract parts of the testing to an other competent laboratory.

As a basis for the testing, the Applicant is to submit, free of all costs to

Nemko, test sample(s), installation and user’s instruction, other technical

documentation, extra components etc. to the extent found necessary by Nemko

for the order in question.

Nemko undertakes no responsibility whatsoever for damages that might occur

to the test sample(s) during testing, storage or transport. As deemed necessary,

the Applicant himself is to provide for insurance covering all submitted

material, cfr. item 2.2. Test samples not collected within 4 - four - weeks from

Nemko dispatching a Return Notice will be discarded. The same applies if

none of the boxes of the Application Form for "Test sample(s) after

examination" are ticked off.

3.

3.1

3.1.1

3.1.2

3.1.3

3.2

3.2.1

3.2.2

3.2.3

3.2.4

3.2.5

3.2.6

3.2.7

3.3

3.4

3.4.1

3.4.2

3.4.3

3.5

3.6

CERTIFICATION AND LICENSING

GENERAL

Based on performed testing or other examination, Nemko certifies equipment

found to comply with current standard or other agreed specification, and which

otherwise is considered suitable for its purpose. Nemko also issues documentation

as a basis for certification in other countries in accordance with i.a. Nordic EMKO

agreement, European CCA agreement or international CB agreement (primary

orders). Correspondingly, Nemko issues national certificates, based on

documentation from other certification bodies according to the above mentioned

agreements (secondary orders).

As a basis for the application, the Applicant is to submit the material and

information found necessary by Nemko for issuing and maintainance of such a

certificate. Documentation in accordance with the EMKO-, CCA-, CB agreement

or equivalent, to be a basis for the certification by Nemko, must not exceed 3 years

of age.

Unless otherwise agreed upon, Nemko has the proprietary right to Nemko's own

original documents. These documents are filed by Nemko during their period of

validity, cfr. item 3.4.1.

FURTHER RIGHTS, RESPONSIBILITIES AND OBLIGATIONS

In connection with marketing, sales etc., the Manufacturer and the Applicant have

the right to inform that the products are certified by Nemko. The Manufacturer and

the Applicant are obliged to ensure that Nemko's name or certification mark are

affixed to the certified products in accordance with current instructions, and that

Nemko's name and certification mark are not misused.

Nemko's certificate, test report etc. does not exempt the Applicant, the

Manufacturer nor a third party for liability according to Norwegian or foreign

product liability legislation.

The certificate may be pleaded as documentation only for products that are

manufactured in total conformity with the certified design.

The Manufacturer is obliged to conform to the rules applying for Nemko's

production surveillance. If required by Nemko, representatives from Nemko or

from other bodies acting on Nemko's behalf, are given admittance to the

production sites, in order to ensure that the conditions associated with the

certificates issued by Nemko, are maintained. Nemko is entitled to invoice the

Manufacturer for the costs related to consumption of work hours, travel- and daily

allowances, in accordance with item 1.2.

In cases required by Nemko, the Applicant shall, free of all costs to Nemko,

provide a sample of the certified product for re-examination in order to ensure that

it remains in conformity with the certified design. The Applicant is obliged to pay

for Nemko’s costs in connection with such re-examination.

Nemko to be notified by the Manufacturer with regard to complaints covering the

equipment and possibly affecting the certificate.

The Manufacturer and the Applicant are obliged to conform to Nemko's possible

directions, as a consequence of the above items 3.2.4 - 3.2.6.

CHANGES TO THE PRODUCT

The manufacturer shall notify Nemko in writing of any proposed product

alteration. Nemko is to evaluate whether the certificate may be maintained or

whether the equipment has to be re-certified, if necessary after repeated testing.

DURATION, TERMINATION AND WITHDRAWAL

Rights and obligations according to these terms attaching to an issued certificate,

do no longer apply after expiry period of the certificate, i.e. maximum 10 years,

unless otherwise is stated in the certificate. (Not applicable to Ex-equipment).

If production and/or marketing of certified equipment should terminate, and

obligations according to the present terms should be required terminated, the

Manufacturer or the Applicant must immediately give Nemko a written request to

be released from the obligations. If Nemko agrees to the release, the rights of the

persons or companies concerned according to the certificate simultaneously shall

no longer apply.

Nemko may withdraw the certificate if the Manufacturer or the Applicant do not

fulfil their obligations in accordance with the present terms. Notice of withdrawal

is to be sent in writing, stating the reason for the withdrawal and the appointed

time of conclusion. Withdrawal of a certificate will normally take effect between 1

and 6 months upon Nemko's dispatch of their notice of withdrawal. In case of

fundamental breach, the withdrawal may have immediate effect. If a certificate

should be withdrawn, each and every right in accordance with the certificate and

the present terms shall no longer apply, hereunder the right to use Nemko's name

and certification mark.

TRANSFER OF CERTIFICATE

The certificate may only be transferred when it is documented towards Nemko that

the present and future owner of the certificate agree to that. The product may,

however, be re-certified under a different company name, as long as documentation

is produced showing that the holder of the certificate permits this. Should the

Manufacturer in such cases approve a new Applicant, a new Power of Attorny as

mentiond under item 1.1.1 above must be submitted. Agreements made between

the former Applicant(s) and the Manufacturer is outside the concern of Nemko.

MAINTENANCE OF CERTIFICATE

For maintenance of the certificate, hereunder the use of Nemko's name or

certification mark on certified products and in connection with marketing and

sales, an annual fee per each certified type/model shall be paid, according to item

1.2. In case of termination or withdrawal of a certificate, the annual fee will not be

refunded.

R&TTE

Technical Construction File

Product description:

802.11g Wireless PC Card

Application:

CAMEO COMMUNICATIONS, INC.

Manufacture:

CAMEO COMMUNICATIONS, INC.

Brand and Type/model number:

Brand Name Model Name

CAMEO WLG-1103

Level One WPC-0300

LG LWS5410N

Etherwan NWP-0208-G

Allnet GmbH ALL0282A

Technical Construction file in accordance with R&TTE Annex IV

Under the provisions if Annex IV point 4 of the R&TTE directive 1999/5/EC of the European Parliament

and of the council of 9 March on Radio equipment and Telecommunications Terminal Equipment

(R&TTE directive) and the mutual recognition of their conformity,

We, the undersigned,

Company CAMEO COMMUNICATIONS, INC.

Address, City No. 42, Min Chuan East Road, Section 6, Taipei 114,

Country Taiwan

Phone number 886-2-27908998

Fax number 886-2-27909463

E-mail Jason_Chang@mail.cameo.com.tw

Have established a Technical Construction File as specified below to be presented to the Notified Body

for his opinion and to be kept available to the relevant national authorities of any Member State for

inspection purpose:

Item number Technical Document description

01 Technical File in accordance with R&TTE directive Annex II point 4

02 Declaration of conformity to specific test suites described in R&TTE directive Annex III

For the following product:

Product Description / Supplementary Info

802.11g Wireless PC Card

Manufacturer CAMEO COMMUNICATIONS, INC.

Brand CAMEO, Level One, LG, Etherwan, Allnet GmbH

Type WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A

The Technical Construction File as specified above will be kept for a period ending at least 10 years

after the last product has been manufactured at the disposal of the relevant national authorities of any

Member State for inspection purpose,

Draw up in

TAIWAN, R.O.C.

Date 2005/4/27

CAMEO COMMUNICATIONS, INC.

No. 42, Min Chuan East Road, Section 6,

Taipei 114, Taiwan

Signature & company stamp Jason Chang /

Wireless Comm. R&D Dept. Manager

Technical Construction file in accordance with R&TTE Annex II Point 4

Under the provisions if Annex II point 4 of the R&TTE directive 1999/5/EC of the European Parliament

and of the council of 9 March on Radio equipment and Telecommunications Terminal Equipment

(R&TTE directive) and the mutual recognition of their conformity,

We, the undersigned,

Company CAMEO COMMUNICATIONS, INC.

Address, City No. 42, Min Chuan East Road, Section 6, Taipei 114,

Country Taiwan

Phone number 886-2-27908998

Fax number 886-2-27909463

E-mail Jason_Chang@mail.cameo.com.tw

Have established a Technical Construction File as specified below to enable assessment of the product

conformity with the essential requirements of the R&TTE directive:

Item number Technical Document description

01 Block diagram

02a Circuit diagram

02b PCB layout

02c Part list

02d Exterior photographs

02e Interior photographs

02f Label information

03a Technical description

03b User manual

04 R&TTE standard list

05 RF-EMC-LVD test report and corresponding annexes

06 Copy of the R&TTE Declaration of Conformity (DOC)

07 Product Quality Assurance documents

For the following product:

Product Description / Supplementary Info

802.11g Wireless PC Card

Manufacturer CAMEO COMMUNICATIONS, INC.

Brand CAMEO, Level One, LG, Etherwan, Allnet GmbH

Type WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A

The Technical File as specified above will be kept for a period ending at least 10 years after the last

product has been manufactured at the disposal of the relevant national authorities of any Member State

for inspection purpose,

Draw up in

TAIWAN, R.O.C.

Date 2005/4/27

CAMEO COMMUNICATIONS, INC.

No. 42, Min Chuan East Road, Section 6,

Taipei 114, Taiwan

Signature & company stamp Jason Chang /

Wireless Comm. R&D Dept. Manager

Block Diagram

CARDBUS CONNECTOR

EEPROM LEDS

40MHZ

XTAL

BPF PA COUPLER

PDET SWITCH

LPF

LPF

ANTA

ANTB

XLNABPF

PA : PA 2409

BPF : BAND PASS FILTER

PDET : POWER DETECTOR

LPF : LOW PASS FILTER

ANTA : ANTENNA A

ANTB : ANTENNA B

XLNA : EXTERNAL LOW NOISE AMPLIFIER

AR2414A-00

AR2414A+PA2409 0

WLG-1103 [Atheros super g cardbus]

C

15Friday, January 14, 2005

Product Name

Size Function Description Rev

Date: Sheet of

CAMEO

CARDBUS CONNECTOR

EEPROM LEDS

40MHZ

XTAL

BPF OPB COUPLER

PDET SWITCH

LPF

LPF

ANTA

ANTB

XLNABPF

OPB : OUTPUT POWER BOOSTER

BPF : BAND PASS FILTER

PDET : POWER DETECTOR

LPF : LOW PASS FILTER

ANTA : ANTENNA A

ANTB : ANTENNA B

XLNA : EXTERNAL LOW NOISE AMPLIFIER

AR2414A-00

Circuit Diagram

5

5

4

4

3

3

2

2

1

1

D D

C C

B B

A A

Tie ground

planes

together.

TOOLING

HOLES

BREAKAWAYS

LOGO

PANEL PERFORATIONS

FIDUCIALS

OPTIONAL SHIELD

HOLES TOOLING HOLES

3.3V

1.8V

3.3V_A

1.8V

3.3V

1.8V_A

3.3V_A

1.8V_A

3.3V 3.3V_A 1.8V 1.8V_A

3.3V 1.8V

X578 1

X32 1

X614 1

X505 1

X590 1

X2 1

1000pF

C66

X607 1

X613 1

X580 1

X573 1

X326 1

X594 1

X577 1

1000pF

C67

X33 1

X503 1

X546 1

ZH1 1

X612 1

X537 1

X570 1

X600 1

0.1uF

10V

C52

X619 1

X548 1

0.1uF

10V

C53

X526 1

1000pF

C51

X39 1

X592 1

X335 1

X8 1

X13 1

X547 1

X336 1

X524 1

ZH502 1

X617 1

X563 1

2.2uF

10V

C48

X545 1

FD1 1

X525 1

X518 1

0.1uF

10V

C50

X9 1

X608 1

X603 1

X536 1

X602 1

ZH501 1

X618 1

X558 1

U1E

AR2414A-00 Digital VDD

G3

D7

M9

D8

D5

E4

G4

J3

H4

L4

L12

M8

M5

N5

N11

J4

J12

M11

M7

VDD18

VDD18

VDD18

VDD33

VDD33

VDD33

VDD18

VDD18

VDD33

VDD33

VDD33

VDD33

VDD33

VDD33

VDD33

VDD18

VDD18

VDD33

VDD18

X561 1

FD2 1

X565 1

X339 1

4.7uF

16V

C1

X10 1

X12 1

X342 1

X556 1

X14 1

0.01uF

25V

C54

ZH500 1

X571 1

X575 1

FD3 1

X596 1

X11 1

X609 1

X581 1

X569 1

X588 1

ZH503 1

X622 1

X341 1

X582 1

U1H

AR2414A-00 Analog Ground

A11

A14

A15

B7

B10

B11

B12

B13

B14

C13

D10

D12

D14

E9

E10

E11

F9

F10

F11

F12

F14

G9

G10

G11

H9

H10

H11

H13

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

AGND

X585 1

U1F

AR2414A-00 Digital Ground

B2

C3

D4

D6

E5

E6

E7

E8

F4

F5

F6

F7

F8

G5

G6

G7

G8

H5

H6

H7

J5

J6

J7

J8

J9 P2

N13

N3

M12

M10

M6

M4

L11

L10

L9

L8

L7

L6

L5

K12

K11

K10

K9

K8

K7

K6

K5

K4

J11

J10

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

FD4 1

X599 1

10pF

C58

X21 1

X620 1

X579 1

X555 1

0.01uF

25V

C65

X598 1

FD502 1

X574 1

X333 1

X572 1

VR

VR3

2 3

1

IN OUT

GND

X601 1

X22 1

X7 1

X587 1

X519 1

0.1uF

10V

C63

1uF

10V

C49

X564 1

U1G

AR2414A-00 Analog VDD

B8

C10

B9

D11

D15

C12

F15

B15

C7

D9

D13

G12

H14

E12

E13

H12

H15

AVDD

AVDD33

AVDD

AVDD33

AVDD33

AVDD33

AVDD

AVDD

AVDD

AVDD

AVDD

AVDD

AVDD

AVDD33

AVDD33

AVDD33

AVDD33

FD501 1

X516 1

X568 1

X562 1X527 1

0.1uF

10V

C141

X583 1

X29 1

X615 1

X576 1

X502 1

0.01uF

25V

C55

0.01uF

25V

C64

X604 1

X517 1

CB51 SHIELD

X99

1

2

3

4

5

6

GND

GND

GND

GND

GND

GND

0

R41

FD500 1

X504 1

X589 1

10pF

C68

X595 1

C

C140

X586 1

X441

PCB_CB

1

10pF

C69

X30 1

X621 1

X330 1

X557 1

0

R42

0.1uF

10V

C62

X605 1

X610 1

X329 1X327 1

1000pF

C56

X560 1

X535 1

X1 1

X28 1

X591 1

10pF

C59

X31 1

X616 1

X584 1

X593 1

X606 1

1000pF

C57

X611 1

X332 1

X338 1

X538 1

X597 1

5

5

4

4

3

3

2

2

1

1

D D

C C

B B

A A

S=5

L=180

W10 L120

W=20

W10 L30

W10 L70

CUT THE TRACE TO TEST AT

THE CONNECTOR.

ANT 1

S1 SHORTED AS THE DEFAULT.

W6 L600

W6 L600 W6 L600

W6 L600

ANT 2

INPUT MATCHING

PRINTED TRANSMIT

COMBLINE FILTER

OUTPUT MATCHING

PRINTED RECEIVE

COMBLINE FILTER

ALTERNATIVE PA :

EPICOM PA2409 -

SEE APP. NOTE

XBIAS

ANT2_CON

ANT1_CON

ANTA2

ANTB2

RFIN 3

ANTC2

XBIAS3 P_DET 3

RFOUT_P3

OPT 3

3.3V_A

C

C25

1pF

C35

R

R35

C

C47

1nH

L16

220pF

C36

10

R25

82

R31

100K

R28

3.9nH

L4

220

1%

R34

220

1%

R24

47pF

C33

NC

25V

C19

1nH

R46

180

R30

F1

12 IO

NC

L14

F2

4-PIN-COUPLER

1

23

4

120pF

C39

1uF

10V

C12

NC

C60

100K

R29

NC

C144

1.5pF

C26

5.1K

R36

C

C24

18nH

L8

1 2

GP1214

U6

1

2

3

4

5

6

7

8

16

10

11

9

13

12

1415

17

NC

RF IN

RF IN

VB1

VCC

VB2

VB3

REF

VC1

RF OUT

RF OUT

DET

NC

VC3

VC2NC

GND

1.5pF

C21

10pF

C42

1pF

C14

MM8430-2600

S3

1 2

3

4

5

6

ANTIN ANTOUT

GND

GND

GND

GND

15K

R38

3.3nH

L2

C

C45

10pF

C31

3pF

C27

10pF

C23

NC

C18

150

R32

3.3nH

L1

SMP1345-518

S2

2 1

3 4

3pF

C142

47pF

C145

3.9nH

L5

10pF

C40

P2

1

C

C29

220

1%

R26

3.3nH

L3

3pF

C28

47pF

C34

10pF

C37

10pF

C32

10pF

C30

10pF

C11

SGA-8343

Q3

1

32

4

PRINTED BPF

F3

4 5

3

1

26

IN OUT

GND

GND

GND C

3.3nH

L6

3.3pF

C43

10pF

C20

F4

1 2

IO

18nH

L7

1 2

0.1uF

C16

NC

C17

10pF

C15

47pF

C13

3.3pF

C38

47

R27

47

R39

1nH

L15

56

R37

10pF

C22

PRINTED BPF

F5

45

3

1

26

INOUT

GND

GND

GND C

L

L10

220

1%

R33

P1

1

3.3pF

C44

MM8430-2600-NO STUFF

S1

1 2

3

4

5

6

ANTIN ANTOUT

GND

GND

GND

GND

10pF

C46

10pF

C41

SMS7630-996

D1

21

5

5

4

4

3

3

2

2

1

1

D D

C C

B B

A A

BIASREF

XTAL

VREG

PUT TP15 ON TOP LAYER

VREG_COMP

XBIAS

VREG_OUT

XTALO

BIASREF

RFOUT_P

XTALI

P_DET RFOUT_N

P_DET4

RFIN4

XBIAS 4

RFOUT_P 4

OPT4

3.3V_A 3.3V_A

1.8V_A

3.3V_A

1.8V_A 1.8V_A

TP16

1

TP15

1

0.1uF

10V

C6

U1D

AR2414A-00 Radio Interface

A8C8 A9C9

A12

A13 A7

A10

G15

G14

E14

E15

C15

C14

C2

F13

J14

G13

J13

J15

C11

RFOUTNPDETN RFOUTPPDETP

RFINN

RFINP RFOUTN_BIAS

RFOUTP_BIAS

ADC_DAC_IP

ADC_DAC_IN

ADC_DAC_QP

ADC_DAC_QN

ATBP

ATBN

TX2

BIASREF

XTALO

VREG_OUT

VREG_COMP

XTALI

IDDQ

TP17

1

0

R48

TP18

1

R

R23

43K

R17

0

R49

0

R19

Y

XY1

1 3

TP19

1

40.000MHZ

Y1

1 3

2.2uF

10V

C5

1.5pF

C8

22pF

C9

1

R16

15pF

C10

2SB1132

Q2

12

3

2.2pF

C7

390

R20

0

R18

120pF

C2

6.19K

1%

R21

10pF

C4

R

R45

10pF

C3

2.2pF

C147

2.7nH

L12

47

R22

BALU N

F6

1

2

3

4

5

6

2.2pF

C146

2.7nH

L11

5

5

4

4

3

3

2

2

1

1

D D

C C

B B

A A

PUT TP12 ON TOP LAYER

EEPROM

KEEP CLOSE TOGETHER

AD24

PCI_INT_L

/CCD1

PCI_PAR

IDSEL

AD4

AD23

/CCD2

AD0

AD19

PCI_STOP_L

AD25

AD10

AD8

AD16

PCI_IRDY_L

PCI_SERR_L

PCI_CBE3_L

AD12

AD6

PCI_CBE2_L

AD22

PCI_DEVSEL_L

AD18

PCI_RST_L

PCI_TRDY_L

PCI_CBE1_L

PCI_CLKRUN_L

AD7

AD14

AD31

AD26

AD21

PCI_REQ_L

AD15

PCI_CBE0_L

AD29

AD27

PCI_CLK

AD2

IDSEL

AD20

AD30

AD28

AD3

AD13

AD11

CVS2

AD5

AD9

PCI_PERR_L

AD17

AD1

AD26

AD16

PCI_IRDY_L

AD12

AD0

AD1

PCI_GNT_L

AD6

AD19

AD4

AD25

AD31

AD22

AD18

PCI_CBE1_L

AD3

AD30

PCI_PAR

AD20

AD9

AD24

PCI_SERR_L

PCI_PERR_L

AD17

PCI_REQ_L

AD7

PCI_CLKRUN_L

PCI_TRDY_L

AD13

AD14

AD15

AD29

PCI_CLK

PCI_FRAME_L

PCI_CBE0_L

AD23

AD8

PCI_GNT_L

AD2

AD21

PCI_FRAME_L

AD10

PCI_MODE

PCI_STOP_L

PCI_DEVSEL_L

AD11

AD27

PCI_CBE2_L

PCI_CBE3_L

PCI_INT_L

PCI_MODE

AD5

AD28

IDSEL

PCI_RST_L

LED_0

ANTB

ANTC

ANTA

LED_1

ANTA 4

ANTC 4

ANTB 4

3.3V

3.3V3.3V 3.3V 3.3V

3.3V 3.3V

3.3V

3.3V

CARDBUS 68 + 8

PC814-6830

J1

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

18

52

GND

CAD0

CAD1

CAD3

CAD5

CAD7

CCBE0

CAD9

CAD11

CAD12

CAD14

CCBE1

CPAR

CPERR

CGNT

CINT

VCC

CCLK

CIRDY

CCBE2

CAD18

CAD20

CAD21

CAD22

CAD23

CAD24

CAD25

CAD26

CAD27

CAD29

RFU2

CCLKRUN

GND

GND

CCD1

CAD2

CAD4

CAD6

RFU1

CAD8

CAD10

CVS1

CAD13

CAD15

CAD16

RFU3

CBLOCK

CSTOP

CDEVSEL

VCC

CTRDY

CFRAME

CAD17

CAD19

CVS2

CRST

CSERR

CREQ

CCBE3

CAUDIO

CSTSCHG

CAD28

CAD30

CAD31

CCD2

GND

CHGND

CHGND

CHGND

CHGND

CHGND

CHGND

CHGND

CHGND

VPP1

VPP2

10K

R6

TP12

1

0

R1

R

R10

RFDATAIN_3 = U0_CTS_L

RFDATAIN_2 = U0_CLK

RFDATAIN_1 = U0_SIN

RFDATAIN_0 = EPRM_SCK

RFDATAOUT = EPRM_SDA

RFSHIFT = ANTD

RFLOAD = ANTB

RFRST_L = ANTA

U1B

AR2414A-00 EJTAG, GPIO, UART, EPRM, ANT

E2

E1

F2

F1

G2

G1

A3

A2

A1

B1

C1

H3

H2

J2

J1

H1

D1

D2

D3

A4

A5

B4

B5

C4

C5

GPIO_5

GPIO_4

GPIO_3

GPIO_2

GPIO_1

GPIO_0

TDI

TDO

TMS

TRST_L

TCLK

U0_SOUT

U0_RTS_L

U0_CTS_L

U0_CLK

U0_SIN

EPRM_SCK

EPRM_SDA

EPRM_EN_L

ANTD

ANTC

ANTB

ANTA

LED_1

LED_0

TP14

1

U1A

AR2414A-00 PCI Interface

M1

M3

M2

R1

N2

P3

P1

N4

P4

R5

P5

N6

P6

N7

P7

N8

N12

P11

R12

P12

R13

P13

R14

R15

N15

N14

M14

L14

L15

L13

M15

M13

R3

R7

R11

P15

R10

L1

R4

N1

R8

P8

P9

N9

P10

N10

K1

L2

R6

K14

L3

K3

R9

PCI_AD31

PCI_AD30

PCI_AD29

PCI_AD28

PCI_AD27

PCI_AD26

PCI_AD25

PCI_AD24

PCI_AD23

PCI_AD22

PCI_AD21

PCI_AD20

PCI_AD19

PCI_AD18

PCI_AD17

PCI_AD16

PCI_AD15

PCI_AD14

PCI_AD13

PCI_AD12

PCI_AD11

PCI_AD10

PCI_AD9

PCI_AD8

PCI_AD6

PCI_AD7

PCI_AD5

PCI_AD0

PCI_AD1

PCI_AD2

PCI_AD3

PCI_AD4

PCI_CBE3_L

PCI_CBE2_L

PCI_CBE1_L

PCI_CBE0_L

PCI_PERR_L

PCI_REQ_L

PCI_IDSEL

PCI_PME_L

PCI_FRAME_L

PCI_IRDY_L

PCI_SERR_L

PCI_TRDY_L

PCI_DEVSEL_L

PCI_STOP_L

PCI_INT_L

PCI_GNT_L

PCI_PAR

PCI_MODE

PCI_RST_L

PCI_CLK

PCI_CLKRUN_L

820

R40

R

R9

R

R3

R

R15

10K

R11

0

R13

10K

R4

0

R2

TP8

1

GREEN

DS2

12

U1C

AR2414A-00 Digital Interface

F3

K2A6

B6

C6

K13

K15 E3

R2

B3

P14

TX_FRAME

RX_FRAMEPOR_EN

POR_L

F2D2EN

BT_ACTIVE

PLLBYPASS CLKOBS

RX_CLEAR

SLEEP

RFTEST

10K

R5

TP1

1

R

R12

TP7

1

390

R8

TP2

1

M24C32WMN6

U3

2

4

7

3

1

5

8

6

E1

VSS

WC

E2

E0

SDA

VCC

SCL

TP6

1

R

R7

TP13

1

TP3

1

TP10

1

TP4

1

TP9

1

GREEN

DS1

12

10K

R14

TP11

1

TP5

1

2N7002

Q1

3

1

2

PCB Layout

Bill of Materials (Part List)

Item Quantity Reference Designator Description Footprint

11C1 4.7uF,X5R, 16V C1206 1102475Z4532**4

2 2 C39, C2 120pF,NPO, 50V C0402 1108121J2*216**

321

C3

,

C4

,

C11

,

C14

,

C15

,

C22

,

C30

,

C31, C32, C35, C37, C40, C41,

C42, C46, C58, C59, C68, C69,

C20 C23

10pF,NPO, 50V C0402 110810PJ2*216**

4 2 C48 2.2uF,X5R, 10V C0805 1102225Z4433***

58

C6, C50, C52, C53, C62, C63,

C141, C16 0.1uF,X5R, 10V C0402 1108104Z2*233**

6 3 C7, C146, C147 2.2pF,NPO, 50V C0402 11082P2C2*216**

7 3 C21, C8, C26 1.5pF,NPO, 50V C0402 11081P5C2*216**

81C9 22pF,NPO, 50V C0402 110822PJ2*216**

9 1 C10 15pF,NPO, 50V C0402 110815PJ2*216**

10 2 C49, C12 1uF,X5R, 10V C0603 1102105Z4332***

11 4 C13, C33, C34, C145 47pF,NPO, 50V C0402 110847PJ2*216**

12 4 C54, C55, C64, C65 10nF,X7R, 25V C0402 1108103Z2*223**

13 6 C27, C28, C38, C43, C44, C142 3pF,NPO, 50V C0402 11083P042*216**

14 1 C36 220pF,X7R, 50V C0402 1108221K2*226**

15 5 C51, C56, C57, C66, C67 1nF,X7R, 50V C0402 1108102K2*226**

16 2 DS2, DS1 LED GREEN SMD LED0805 11061*141300001

17 1 D1

SMS7630_SCHO

TTKY

DETECTOR

SC-79 1105SM763029MF*

18 1 J1 CON,SMD,68pin,C

ardbus Connector 1141192*344*0*0

19 2 L4, L5 3.9nH,+/- 0.1nH L0402 11083N911******

20 2 L8, L7 18nH,+/- 5% L0402 110818NJ1******

21 2 L12, L11 2.7nH,+/- 0.1nH L0402 11082N711******

23 3 L15, R46, L16 1nH,+/- 0.1nH L0402 11081N011******

24 1 Q1 2N7002_60V N-

CH. FET_ 7.5 SOT-23 11042N7002*34**

25 1 Q2 2SB1132, SOT-

89, PNP SOT-89 11042SB113225**

26 1 Q3 SGA8343,

LNA,2.4GHz SOT-343 1104SG8343AJ***

27 1 R30 180 OHMS R0402 11011800F521***

28 1 R40 820 OHMS R0402 11018200J521***

29 1 R38 15K OHMS, +/-

5%, 1/16W R0402 11011502J521***

30 6 R1, R2, R13, R18, R48, R49 0 OHMS, +/- 5%,

1/16W R0402 11010000J521***

31 5 R4, R5, R6, R11, R14 10K OHMS, +/-

5%, 1/16 W R0402 11011002J521***

32 2 R8, R20 390 OHMS,+/- 5%,

1/16 W R0402 11013900J521***

34 1 R17 43K OHMS,+/-

5%, 1/16 W R0402 11014302J521***

35 3 R19, R41, R42 0 OHMS, +/- 5%,

1/8W R0805 11010000J542***

36 1 R21 6.19K OHMS, +/-

1%, 1/16 W R0402 11016191F521***

37 3 R22, R27, R39 47 OHMS, +/- 5%,

1/16 W R0402 11010470J521***

38 4 R24, R26, R33, R34 220 OHMS, +/-

1%, 1/16W R0402 11012200F521***

39 1 R25 10 OHMS, +/- 5%,

1/16W R0402 11010100J521***

40 2 R28, R29 100K OHMS, +/-

5%, 1/16W R0402 11011003J521***

41 1 R31 82.5 OHMS, +/-

1%, 1/16W R0402 110182R5F521***

42 1 R32 150 OHMS, +/-

1%, 1/16W R0402 11011500F521***

43 1 R36 5.1K OHMS, +/-

5%, 1/16 W R0402 11015101J521***

44 1 R37 56 OHMS, +/- 5%,

1/16W R0402 11010560J521***

45 1 X99

RF

Shield

for

CB51

151104040200200

46 1 S2 SMP1345,SWITC

HING PIN DIODE SWI-4P-LG

A

1105SM13457A4K*

47 1 U1

AR2414A,BGA

224,AnalogAndDig

ital

BGA-224 1111AR2414A00**

48 1 U3 24C32,SO8,Serial

32Kbit EEPROM SO8 11143M24C32*32*

49 1 U6 Epicom,PA2409 1111PA2409*****

51 1 Y1

XTAL,SMD,40MH

z,4pin,+/-

18PPM_LEADLES

S CRYSTAL

(CL=15pF)

110704000071811

52 1 C5 10uF C0805 1102106Z*433***

53 1 PCB 11514WLG11031A1

Exterior and Interior Photographs

External Photos of 802.11g Wireless PC Card --------------------------------------- 1/5

Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

External Photos of 802.11g Wireless PC Card --------------------------------------- 2/5

Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Internal Photos of 802.11g Wireless PC Card ---------------------------------------- 3/5

Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Internal Photos of 802.11g Wireless PC Card ---------------------------------------- 4/5

Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Internal Photos of 802.11g Wireless PC Card ---------------------------------------- 5/5

Applicant: CAMEO COMMUNICATIONS, INC. FCC ID: NHPWLG1103

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Label Information

9500WLG11030XAV

WLG-1103

XAV

Grace Chen

"MADE IN TAIWAN"

"MADE IN CHINA"

6.00 mm

34.00 mm

000000000000

MAC:

Grace Chen

CAMEO

MODEL : WLG-1103

Q'TY:

S/N:

60 PCS

FROM

()

TO

CARTON OF NO. /

MADE IN xxxxxx

( )

()

S/N:

12.00 mm

35.00 mm

()

FCC ID: NHPWLG1103

S/N:

WLG-1103 Rev.AV

()

FCC ID: NHPWLG1103

25.00 mm

51.00 mm

WLG-1103

94.4.06

0470

0470

0470

"See Caution in Manual"

"See Caution in Manual"

US Patent Nos.

4,603,320 ; 4,686,506;

4,972,470 ; 4,543,450

802.11g WLAN

Card Bus Adapter

Made in XXXXXX

F1 PCB

30.00 mm

35.00 mm

Technical Description

Technical Specifications

General

Radio Technology IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)

IEEE 802.11g Orthogonal Frequency Division Multiplexing

(OFDM)

Interface CardBus Type II specification 32bit data bus

Data Transfer Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps (auto sense)

Receiver Sensitivity 54Mbps: Typical -73dBm @ 10% PER (Packet Error Rate)

11Mbps: Typical -85dBm @ 8% PER (Packet Error Rate)

Transmit Rate 802.11g: 14dBm typically

802.11b: 17dBm typically

Frequency Range 2412 ~ 2484 MHz ISM band (channels 1 ~ 14)

Modulation Schemes DBPSK/DQPSK/CCK/OFDM

Channels 1~11 channels (FCC), 1~13 channels (ETSI),

1~14 channels (MKK-Japan)

Media Access Protocol CSMA/CA with ACK

Security 64/128-bits WEP Encryption, WPA

Diagnostic LED PWR (Power) & LNK (Link status)

Antenna Integrated Microstrip dual diversity antennas

Physical and Environmental

Driver Support Windows 98SE, Windows 2000, Windows ME, Windows XP

Continuous Current

Consumption 250mA typ. for receive mode, 350mA typ. for transmit mode

Temperature Operating: 0° ~ 40° C, Storage: -10° ~ 70° C

Humidity 10% ~ 95% RH, no condensation

Dimensions 118 x 54 x 7 mm (W x H x D)

Certifications FCC Part 15.247 for US, ETS 300 328 for Europe,

User Manual

IEEE 802.11g

CardBus Adapter

User’s Guide

i

Regulatory notes and statements

Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless LAN devices.

The energy levels of these emissions however are far much less than the

electromagnetic energy emissions from wireless devices like for example mobile

phones. Wireless LAN devices are safe for use frequency safety standards and

recommendations. The use of Wireless LAN devices may be restricted in some

situations or environments for example:

·On board of airplanes, or

·In an explosive environment, or

·In case the interference risk to other devices or services is perceived or identified

as harmful

In case the policy regarding the use of Wireless LAN devices in specific

organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial

plants, private buildings etc.) is not clear, please ask for authorization to use these

devices prior to operating the equipment.

Regulatory Information/disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with

the instructions included in the user documentation provided with the product. Any

changes or modifications made to this device that are not expressly approved by the

manufacturer may void the user’s authority to operate the equipment. The

Manufacturer is not responsible for any radio or television interference caused by

unauthorized modification of this device, of the substitution or attachment.

Manufacturer and its authorized resellers or distributors will assume no liability for

any damage or violation of government regulations arising from failing to comply

with these guidelines.

USA-FCC (Federal Communications Commission) statement

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause

undesired operation of this device.

FCC Radio Frequency Exposure statement

This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65

and found compliant to the requirements as set forth in CFR 47 Sections 2.1091,

2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices.

ii

The radiated output power of this Wireless LAN device is far below the FCC radio

frequency exposure limits. Nevertheless, this device shall be used in such a manner

that the potential for human contact during normal operation is minimized.

When nearby persons has to be kept to ensure RF exposure compliance, in order to

comply with RF exposure limits established in the ANSI C95.1 standards, the

distance between the antennas and the user should not be less than 2.5cm.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy. If not

installed and used in accordance with the instructions, it may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try and correct the interference by one or more of the following

measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the equipment and the receiver.

3. Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Export restrictions

This product or software contains encryption code that may not be exported or

transferred from the US of Canada without an approved US Department of

Commerce export license.

Safety Information

Your device contains a low power transmitter. When device is transmitted it sends

out radio frequency (RF) signal.

CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this

equipment should be installed and operated with minimum distance 2.5cm between

the radiator and your body. Use on the supplied antenna. Unauthorized antenna,

modification, or attachments could damage the transmitter and may violate FCC

regulations.

iii

The antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 2.5cm from all persons and must not be co -located or operating

in conjunction with any other antenna or transmitter.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

Protection requirements for health and safety – Article 3.1a

Testing for electric safety according to EN60950-1 has been conducted. These are

considered relevant and sufficient.

Protection requirements for electromagnetic compatibility – Article

3.1b

Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 489-

17 and EN 55024 has been conducted. These are considered relevant and sufficient.

Effective use of the radio spectrum – Article 3.2

Testing for radio test suites according to EN 300 328 has been conducted. These

are considered relevant and sufficient.

CE in which Countries where the product may be used freely:

Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland,

Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.

France: except the channel 10 through 13, law prohibits the use of other channels.

iv

TABLE OF CONTENT

Introduction .........................................................................................1

Overview of this User’s Guide..........................................................1

Unpacking and Setup...........................................................................2

Unpacking..........................................................................................2

Setup..................................................................................................2

Hardware Installation ..........................................................................3

LED Indicator....................................................................................3

Check the installation ........................................................................3

Software Installation............................................................................4

Windows 98se/ME/2000/XP Utility and Driver Installation ............4

Wireless Utility Setting.....................................................................5

1

INTRODUCTION

Congratulations on your purchase of this 108Mbps IEEE 802.11g Wireless Cardbus

Adapter.

This manual helps to get familiar with the Wireless Cardbus Adapter. This manual

contains detailed instructions in operation of this product. Please keep this manual

for future reference.

With a Wireless (IEEE 802.11g) Cardbus Adapter, a laptop computer or a station

can communicate with another computer in a wireless way. Easy-to-use utilities are

bundled with Wireless Cardbus Adapter for configuration, monitoring, and

diagnosis purposes.

Wireless Cardbus Adapter can wirelessly transmit and receive data, minimizing the

need for wired connections, at a speed of up to fifty-four megabit per second. With

Wireless Cardbus Adapter, you can locate your Notebook PC or station wherever

you want without wires and cables.

Wireless Cardbus Adapter provides users with an access to real-time information

anywhere in their organization. The mobility provides productivity and service,

which are not available under wired networks. The Wireless Cardbus Adapter

configuration is easy to change from peer-to-peer networks, suitable for a small

number of users, to full infrastructure networks of thousands of users that allow

roaming around a broad area.

Overview of this User’s Guide

Introduction. Describes the Wireless Cardbus Adapter.

Unpacking and Setup. Helps you get started with the basic installation of the

Wireless Cardbus Adapter.

Hardware Installation. Describes the LED indicators of the Adapter.

Software Installation. Tells how to setup the driver and the utility setting.

Technical Specifications. Lists the technical (general, physical and environmental)

specifications of the Wireless Cardbus Adapter

2

UNPACKING AND SETUP

This chapter provides unpacking and setup information for the Wireless Cardbus

Adapter.

Unpacking

Open the box of the Wireless Cardbus Adapter and carefully unpack it. The box

should contain the following items:

u One 108Mbps IEEE 802.11g Wireless Cardbus Adapter

u One Driver & Utility with User’s Guide CD-ROM

If any item is found missing or damaged, please contact your local reseller for

replacement.

Setup

The setup of the Wireless Cardbus Adapter can be performed using the following

steps:

u Visually inspect the Cardbus Adapter and make sure that it is fully plugged in to

the Cardbus slot.

u Make sure that there is a well environment that there is no much intrusion to

have a better connection.

3

HARDWARE INSTALLATION

LED Indicator

Power (PWR)

The PWR indicator lights green while the Wireless Cardbus adapter is connecting

to the Cardbus or PCMCIA slot, otherwise, it is off.

ACT (Activity)

The ACT indicator blinks green when the Wireless Cardbus Adapter is connected

to a network successfully and transmitting data. Otherwise the indicator is off

whiles the Wireless LAN is stand by.

Check the installation

The LEDs of the Wireless Cardbus Adapter are clearly visible and the status of the

network link can be seen instantly:

1. Once the device is plugged to the station’s Cardbus slot, the PWR LED of the

Wireless Cardbus Adapter will light up indicating a normal status.

2. When the device plugged to the station’s Cardbus slot and the driver was

installed, the ACT and PWR LED will start alternate blinking, it means that the

device is starting to scan the wireless devices near the Wireless Cardbus Adapter.

3. While the Wireless Cardbus Adapter linked up and transmitting data to the

Access Point or to other Wireless LAN station, the ACT LED will start blinking.

4

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless Cardbus

Adapter.

Windows 98se/ME/2000/XP Utility and Driver Installation

1. Insert the Wireless Cardbus Adapter Driver & Utility CD-ROM into computer’s

CD-ROM Drive and it will automatically run a setup menu and install the driver

and the utility. In some specific setting on Windows system, you may need to

proceed the software manually, go to your Windows Start menu and choose

Run, type “D:\Utility\Setup.exe” in the dialog box (D:\ will depend on where

your CD-ROM drive is located) and click OK.

2. If you need to install the driver manually, refer each Windows OS to the

following CD-Rom directory path: D:\Driver\<Windows OS>\net5211.inf.

Note: (D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows OS you are using).

3. The Install Shield Wizard screen will appear. Click “Next” to continue.

4. The installation program will help you to setup the Wireless Cardbus utility.

Be noted that the Windows XP have its own Wireless Utility; you can either

use the utility of Windows XP or the provided utility.

5. When the Wireless Cardbus Adapter was installed, you will see the icon on the

Windows task bar.

When the icon in the toolbar represents in full green color then the signal

strength has an excellent performance with the AP, if it represents in yellow

color then the signal strength has a fair performance with the AP, and if the icon

represents no color, then the signal strength has a worst performance with the

wireless station.

5

Wireless Utility Setting

I. Link Information

The default page is as below after launching the Utility program.

Status: Shows the BSSID associated, which can be used to identify the wireless

network.

SSID: Shows current SSID, which must be the same for the wireless client and AP

in order for communication to be established.

Frequency: Shows the current frequency used for wireless network.

Wireless Mode: Shows the current wireless mode used for wireless communication.

Encryption: Shows the current encryption mode used for wireless network.

TxRate: Shows the current data rate used for transmitting.

Channel: Shows the current channel for communication.

Link Quality: Shows the link quality of the 108Mbps wireless LAN PC card with

the Access Point when operating under Infrastructure mode.

Signal Strength: Shows the wireless signal strength of the connection between the

108Mbps wireless LAN PC card with the Access Point.

Data Rate: Shows the statistics of data transfer, and the calculation is based on the

number of packets transmitted and received.

6

II. Configuration

This is the page where changes the basic settings of the PC card with the minimum

amount of effort to implement a secure wireless network environment.

SSID: Service Set Identifier, which is a unique name shared among all clients and

nodes in a wireless network. The SSID must be identical for each clients and nodes

in the wireless network.

Wireless Mode: There are two types available for selection

?Infrastructure – to establish wireless communication with LAN and other wireless

clients through the use the Access Points.

?Ad-Hoc – to establish point-to-point wireless communication directly with other

wireless client devices such as wireless network PCI Adapter.

AdHoc Band: There are two bands available for selection- 11B and 11G

Channel: The value of channel that AP will operate in. User can select the channel

range of 1 to 11 for North America (FCC) domain and 1 to 13 for European (ETSI)

domain and 1 to 14 for Japanese domain.

Tx Rate: Select the data rate for data transmission.

Power Mode: There are 3 modes to choose.

?Continuous Access Mode (default) – the PC card is constantly operating with full

power and it consumes the most power.

?Maximum Power Save – the PC card consumes the least power and only operates

when there is wireless network activity.

?Power Save – the PC card consumes the moderate level of power.

7

Preamble: Select Long or Short Preamble type. Preamble is a sequence of bits

transmitted at 1Mbps that allows the PHY circuitry to reach steady-state

demodulation and synchronization of bit clock and frame start. Two different

preambles and headers are defined: the mandatory supported Long Preamble and

header, which interoperate with the 1 Mbit/s and 2 Mbit/s DSSS specification (as

described in IEEE Std 802.11), and an optional Short Preamble and header (as

described in IEEE Std 802.11b). At the receiver, the Preamble and header are

processed to aid in demodulation and delivery of the PSDU. The Short Preamble

and header may be used to minimize overhead and, thus, maximize the network

data throughput. However, the Short Preamble is supported only from the IEEE

802.11b (High- Rate) standard and not from the original IEEE 802.11. That means

that stations using Short-Preamble cannot communicate with stations implementing

the original version of the protocol. Click “Apply” for the changes to take effect.

Support Band: There are three functions for users select, including 11B, 11G and

eXtended Range. The default setting is 11B, 11G and eXtended Range enable,

which is interoperable with both 11B and 11G devices, and provide more than

500m connection ability.

Note: user must select one of 11B or 11G at least, otherwise the wireless

connection will not function.

III. Advanced

This is the page to configure Security settings of 108Mbps wireless LAN PC card.

Encryption: 4 options are available: Disable, Enable, WPA and WPA-PSK.

Select Enable or Disable for WEP data encryption feature. If one of the two

8

options is selected, it is required to select the Authentication mode from the next

dropping list. If WPA is selected, configuration is enabled. Please click the

“configuration”. The below window is pop up. Then, please select the certificate

that user wants to use and enter the server name and login name

If WPA-PSK is selected, click the configuration button. The popping window is as

the below. Please enter the key.

Auth. Mode: There are three modes available to choose.

??Open Authentication – the sender and receiver do not share secret Key for

communication. Instead, each party generates its own key-pairs and asks the other

party to accept it. The key is regenerated when the connection is established every

time.

??Shared Authentication – the sender and receiver shares the common key for

data communication, and the key is used for extended length of time.

??Auto – depend on the communication to establish, and automatically use the

proper authentication mode.

The following will only be activated to allow for configuration when Encryption is

enabled.

Default Key: select one of the 4 keys to use.

9

Network Key: choose the encryption way, either in HEX or ASCII formats, and

enter the password in the blank space.

Key Length: select 64 or 128 bits as the length of the keys

Key Format: ASCII or HEX

IV. Site Survey

This page allows user to enable the Site Survey function to scan for the available

wireless network (wireless clients and Access Points) and establish wireless

communications with one.

Available Network – displays the wireless networks (wireless clients and Access

Points) that are in signal range.

Select any one of them to establish communications by simply mouse double-click

or click on the “Connect” button.

Click “Refresh” button to start scanning for available network again.

Profile – User can create and manage the created profiles for Home, offices or

public areas. By double-clicking on one of the created profile, the setting will adapt

to the configuration such as SSID, channel, and WEP settings saved by that

particular profile.

Remove: To remove the selected the profile

Properties: To view and change its settings of the profile.

10

Add: To add a profile. Then, the following screen would appear. User can enter the

necessary information required for accessing Access Points or Wireless Router.

V. About

This page displays some information about the 108Mpbs wireless LAN PC card

utility, which includes the version numbers for Driver, Firmware and Utility. When

there is new version of software available for upgrade, users will be able to identify

by version numbers.

R&TTE Standards List

R&TTE List of Standard

With referring to the article of the directive of R&TTE 1999/5/EC, the following equipment:

Product Description / Supplementary Info

802.11g Wireless PC Card

Manufacturer CAMEO COMMUNICATIONS, INC.

Brand CAMEO, Level One, LG, Etherwan, Allnet GmbH

Type WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A

has been tested to and conforms with the following List of R&TTE Harmonized standards:

Standard Issue date

ETSI EN 300 328

ETSI RF Specification V1.4.1 Apr. 2003

Electromagnet

ic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission systems; Data transmission equipment operating in the 2,4GHz

ISM band and using spread spectrum modulation techniques; Harmonized

EN covering essential requirements under article 3.2 of the R&TTE Directive.

Meets R&TTE directive art. 3.2.a on effective use of radio frequency

spectrum so as to avoid harmful interference.

ETSI EN 301 489-1

ETSI EN 301 489-17

ETSI EMC Specification

V1.4.1 Aug. 2002

V1.2.1 Apr. 2002

Electromagnetic compatibility and Radio spectrum Matters(ERM);

Electro Magnetic Compatibility (EMC) standard for radio equipment and

services; Part 1: Common Technical requirements; Part 17: Specific

conditions for Wideband data and HIPERLAN equipment.

Meets R&TTE directiv

e art. 3.1.b of essential requirements on protection with

respect to Electro Magnetic Compatibility.

As such standards referred to tin Article 5 of the directive have not been applied or do not exist, the

following Adopted solutions with descriptions and explanations as listed below, have been applied

in full or in part, to meet the essential requirements of the directive:

Standard Issue date

EN 60950-1

LVD specification 2001

Safety of information technology equipment, including electrical business

equipment.

Meets R&TTE directive art. 3.1.a of essential requirements on protection of

the health and safety of the user.

Draw up in

TAIWAN, R.O.C.

Date 2005/4/27

CAMEO COMMUNICATIONS, INC.

No. 42, Min Chuan East Road, Section 6,

Taipei 114, Taiwan

Signature & company stamp Jason Chang /

Wireless Comm. R&D Dept. Manager

RF-EMC Test Reports and

Corresponding Annexes

Test Report -------------------------------------------------------------------------------- 1/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Report No. C51ET050252

Specifications ETSI EN 300 328 V.1.4.1 (2003-04)

Applicant CAMEO COMMUNICATIONS, INC.

Applicant No. 42, Min Chuan East Road, Section 6,

address Taipei 114, Taiwan

Items tested 802.11g Wireless PC Card

Model No. WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,

ALL0282A

EUT Condition Engineering sample; Pre-production; Final production

(Sample # C51050252)

Results Compliance (As detailed within this report)

Date 03/30/2005 (month / day / year) (Sample received)

04/06/2005 to 04/18/2005 (Test)

Prepared by Project Engineer

______________________ (Jack Tsai)

Authorized by General Manager

(Frank Tsai)

Issue date April 21, 2005 (month / day / year)

Modifications None

Tested by Training Research Co., Ltd.

Office at No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan

Laboratory at 1F, No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan

Open site at No. 15, Lane 530, Balian Rd., Sec. 1, Shijr City, Taipei Hsien 221, Taiwan

Conditions of issue:

This test report shall not be reproduced except in full, without written approval of

TRC. And the test result contained within this report only relate to the sample submitted

for testing.

Aut. No. ELA 131

Test Report -------------------------------------------------------------------------------- 2/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

We here by verify that:

The test data, data evaluation, test procedures and equipment configurations shown in this report

were made mainly in accordance with the procedures given in ETSI EN 300 328 (V.1.4.1) as a reference.

All test were conducted by Training Research Co., Ltd.,255 Nanyang Street, Shijr, Taipei Hsien

221, Taiwan, R.O.C. Also, we attest to the accuracy of each.

We further submit that the energy emitted by the sample EUT tested as described in the report is

in compliance with the technical requirements set second edition in the European Telecommunication

Standard ETSI EN 300 328 (V.1.4.1).

Reservation:

The test results herein refer only to the tested sample. Training Research Co., Ltd. is not

responsible for any generalizations or conclusions draw from these test results and concerning further

samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report.

Test by :

Training Research Co., Ltd.

TEL: 886-2-26935155 FAX: 886-2-26934440

No. 255, Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C.

Test Report -------------------------------------------------------------------------------- 3/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Tables of Contents

I. GENERAL ..........................................................................................4

1.1 INTRODUCTION ..........................................................................................................4

1.2 DESCRIPTION OF EUT.................................................................................................4

1.3 TEST METHOD ...........................................................................................................4

1.4 DESCRIPTION OF SUPPORT EQUIPMENT ......................................................................5

1.5 CONFIGURATION OF SYSTEM UNDER TEST .................................................................6

1.6 VERIFY THE FREQUENCY AND CHANNEL.....................................................................7

1.7 TEST PROCEDURE.......................................................................................................7

1.8 LOCATION OF THE TEST SITE......................................................................................7

1.9 GENERAL TEST CONDITION........................................................................................8

II. SECTION 5.2.1: EFFECTIVE RADIATED POWER....................10

2.1 Test Result of Effective Radiated Power for 802.11b ................................................10

2.2 Test Result of Effective Radiated Power for 802.11g.................................................11

III. SECTION 5.2.2: PEAK POWER DENSITY...................................12

3.1 Test Result of Peak Power Density for 802.11b........................................................12

3.2 Test Result of Peak Power Density for 802.11g........................................................12

IV. SECTION 5.2.3 : FREQUENCY RANGE.......................................15

4.1 Test Result of Frequency Range for 802.11b ............................................................15

4.2 Test Result of Frequency Range for 802.11g.............................................................17

V. SECTION 5.2.4: TRANSMITTER SPURIOUS EMISSIONS .......19

5.1 Test Result for IEEE 802.11b...................................................................................19

5.2 Test Result for IEEE 802.11g...................................................................................22

VI. SECTION 5.3.2: RECEIVER SPURIOUS EMISSIONS................24

6.1 Test Result for IEEE 802.11b...................................................................................24

6.2 Test Result for IEEE 802.11g...................................................................................27

6.3 Test Result for Standby mode...................................................................................29

VII. INSTRUMENT AND ANCILLARIES EQUIPMENT OF LIST ....30

Appendix A: Antenna Specification............................................................31

Test Report -------------------------------------------------------------------------------- 4/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

I. GENERAL

1.1 Introduction

The following measurement report is submitted on behalf of Applicant in support of a wireless

LAN measurement in accordance with ETSI EN 300 328-2 V.1.4.1 (April 2003) of the European

Telecommunication Standard.

1.2 Description of EUT

Product Name : 802.11g Wireless PC Card

Model No. : WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,

ALL0282A

Frequency Range : 2.400GHz ~ 2.4835GHz

Operating Frequency : 2.412GHz ~ 2.472GHz

Support Channel : 13 Channels

Modulation Skill : DBPSK, DQPSK, CCK, OFDM

Power Type : Powered by PCMCIA interface of client’ s device

Power Cable : None

Data Cable : None

1.3 Test Method

1. The EUT connected with PC:

Insert the EUT into the PCMCIA bus of the notebook computer

2. Using the notebook computer and software provided by the manufacturer to control the

EUT. The test is performed under the specific conditions.

3. Set different channel and data rate being tested, and then making EUT to the following

modes:

a) The mode of continuous transmission.

b) The receive mode.

c) The standby mode.

Test Report -------------------------------------------------------------------------------- 5/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

1.4 Description of Support Equipment

In order to construct the minimum testing, following equipment were used as the support units.

Notebook : IBM Think Pad X20

Model No. : 2662-11T

Serial No. : FX-1192200/09

FCC ID : DoC Approved

BSMI : 3892B565

Adaptor : IBM

Model No. : PA2450U

Serial No. : 02K6654

FCC ID : DoC Approved

Power type : I/P: 100 ~ 240vac, 50 ~ 60 Hz, 0.5A ~ 1.2A; O/P: 16Vdc, 4.5A

Power cord : Non-shielded, 1.80m length, Plastic, with ferrite core

Notebook : ASUSTek Computer

Model No. : AB00F

Serial No. : 24NP016361

FCC ID : DoC Approved

BSMI : 41016012

Power type : 100 ~ 240VAC, 1A 50/60 Hz, Switching

Adaptor of PC : LITE-ON Electronics, Inc.

Model No. : PA-1530-01

Serial No. : 00151184

FCC ID : DoC Approved

BSMI : 3882B259

Power cable : Non-shielded, 1.72m length, Plastic hood, No ferrite core

(Between power adaptor and AC power source)

Power cable : Shielded, 1.48m length, Plastic hood, with ferrite core

(Between power adaptor and notebook)

WLAN Card : Gemtek Technology Co., Ltd.

Model No. : C911003

FCC ID : MXF-C911003

Test Report -------------------------------------------------------------------------------- 6/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

1.5 Configuration of System Under Test

The tests below are carried with the EUT transmitter set at high power in TDD mode. The

EUT is forced to select of output power level and channel number by computer.

Test-table

AC source

Adaptor

EUT

Notebook

Test Report -------------------------------------------------------------------------------- 7/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

1.6 Verify the Frequency and Channel

CH12345678910

0 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457

1 2462 2467 2472 --- --- --- --- --- --- ---

Note:

(1) This is for sure that all frequencies are in 2.4GHz – 2.4835 GHz.

(2) After test, the EUT operating frequencies are in 2.412GHz to 2.472GHz. So all the item as

followed in testing report are need to test these three frequencies:

channel 1, channel 7, and channel 13.

(3) E.T.S.I (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

1.7 Test Procedure

All measurements performed in this report were performed mainly according to the techniques

described in ETSI EN 300328 (April, 2003) and the pre-setup was written on 1.4 test method, the

detail setup was written on each test item.

1.8 Location of the Test Site

The radiated emissions measurements required by the rules were performed on the

three-meter,Anechoic Chamber (Registration Number: 93906) maintained by Training

Research Co., Ltd. 1F., No. 255 Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C. Complete

description and measurement data have been placed on file with the commission. The conducted

power line emissions tests and other test items were performed in a anechoic chamber also located at

Training Research Co., Ltd.

No. 255 Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C. Training Research Co.,

Ltd. is listed by the FCC as a facility available to do measurement work for others on a contract

basis.

Test Report -------------------------------------------------------------------------------- 8/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

1.9 General Test Condition

The test condition shall be as follows: (See Clause 6)

The NORMAL temperature and humidity conditions for tests shall be any convenient

combination of temperature and humidity within the following ranges:

-temperature: +15к to +35к;

-relative humidity: 20% to 75%.

The normal test voltage for equipment to be connected to the main shall be the nominal mains

voltage.

For purpose of this ETS, the normal voltage shall be the declared voltage or any of the declared

voltages for which the equipment was designed.

The frequency of the test power source corresponding to the AC mains shall be between 49Hz

and 51Hz. When radio equipment is intended for operation from the usual, alternator fed lead-acid

battery power source used on vehicles, then the normal test voltage shall be 1.1 times the nominal

voltage of the battery (6V, 12V, etc.)

For operation from other power sources or types of battery (primary or secondary), the

nominal test voltage shall be as declared by the equipment manufacturer. This shall be recorded in the

test report.

For tests at EXTREME temperatures, measurements shall be made in accordance with the

procedures specified in subclause 6.4.3, at the upper and lower temperatures of the range as follows:

temperature: -20к to +55к;

Where the manufacturer’ s declared operating range does not include the range of -20к to

+55к, the equipment shall be tested over the following temperature ranges:

a)0к to +35кfor equipment intended for INDOOR use only, or intended for use in areas

where the temperature is controlled within this range;

b)Over the extremes of the operating temperature range(s) of the declared host equipment(s)

in case of plug-in radio devices.

Test Report -------------------------------------------------------------------------------- 9/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

The frequency range as in subclause 5.2.3 and the e.i.r.p. Limit in subclause5.2.1 shall not be

exceeded.

Tests at extreme power source voltages specified below are not required when the equipment

under test is designed for operation as part of and powered by another system or piece of equipment.

Where this is the case, the limit values of the host system or host equipment shall apply. The

appropriate limit values shall be declared by the manufacturer and recorded in the test report.

The EXTREME TEST VOLTAGE for equipment to be connected to an AC mains source

shall be the nominal mains voltage ±10%.

When radio equipment is intended for operation from the usual type of alternator fed lead-acid

battery power source used on vehicles, then extreme test voltage shall be 1.3 and 0.9 times the

nominal voltage of the battery (6V, 12V,etc.).

The lower extreme test voltage for equipment with power source using the following type of

battery, shall be:

-for the Leclanche’ or lithium type battery: 0.85 times the nominal voltage of the battery;

-for the mercury or nickel-cadmium type of battery: 0.9 times the nominal voltage of the

battery.

In both cases, the upper extreme test voltage shall be 1.15 times the nominal voltage of the

battery.

For equipment using other power sources, or capable of being operated from a variety of

power sources (primary or secondary), the extreme test voltages shall be those declared by the

manufacturer; these shall be recorded in the test report. Before measurements are made the

equipment shall have reached thermal balance in the test chamber.

Test Report -------------------------------------------------------------------------------- 10/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

II. Section 5.2.1: Effective Radiated Power

2.1 Test Result of Effective Radiated Power for 802.11b

Power level at which the measurement has been performed 78.705 mW

TRANSMITTER PEAK POWER

TEST CONDITION Tx Peak

(dBm)

Tx Ave.

(dBm)

Cable Loss

(dB)

25 {C 10.08 7.62

Channel 1 0{C 10.58 7.90 6.25

35 {C 9.96 7.51

25 {C 10.13 7.60

Channel 7 0{C 10.43 7.85 6.20

35 {C 10.04 7.51

25 {C 10.39 7.63

Channel 13 0{C 10.68 8.01 6.30

35 {C 10.23 7.62

Limit Tx Peak : 23dBm / -7dBW

Tx Ave. : 20dBm / -10dBW

Uncertainty ̈́0.56dB

NOTE:

(1) The E.U.T is a stand-alone radio device (see the clause 6.2.2). The powered by the adaptor. So,

the AC power is used as the extreme voltage source. (See clause 6.3.2.1)

(2) The value of table is worst case during test condition, includes different combinations of

transmitter rate antenna polarity and temperature

(3) TX PEAK: Max Peak Power, TX Ave.: Average Peak.

Actually Power = Max Peak Power + Cable Loss,

E.I.R.P. = Actually Power + Antenna Gain

= 16.98dBm + 1.98dBi

= 18.96dBm

(4) ETSI (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

Test Report ------------------------------------------------------------------------------11/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

2.2 Test Result of Effective Radiated Power for 802.11g

Power level at which the measurement has been performed 40.299 mW

TRANSMITTER PEAK POWER

TEST CONDITION Tx Peak

(dBm)

Tx Ave.

(dBm)

Cable Loss

(dB)

25

{C 13.42 3.65

Channel 1 0 {C 14.02 3.98 6.25

35

{C 13.68 3.46

25 {C 13.57 3.90

Channel 7 0 {C 14.23 4.14 6.20

35 {C 13.14 3.54

25

{C 13.55 3.81

Channel 13 0 {C 14.18 4.11 6.30

35

{C 13.42 3.63

Limit Tx Peak : 23dBm / -7dBW

Tx Ave. : 20dBm / -10dBW

Uncertainty ± 0.56dB

NOTE:

(5) Duty cycle (X):

Tx on = 296uS, Tx on + Tx off = 688uS

Average power = Tx Ave. + Cable Loss = 10.41 dBm

Peak power = Tx Peak. + Cable Loss = 20.48 dBm

Antenna Gain = 1.98 dBi

E.I.R.P. = Average power + Antenna Gain +10 log(1/X)

= 10.41 + 1.98 + 3.66

= 16.05 dBm

Test Report -------------------------------------------------------------------------------- 12/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

III. Section 5.2.2: Peak Power Density

3.1 Test Result of Peak Power Density for 802.11b

Channel Frequency

(MHz)

Ppr

(dBm)

CF

(dB)

Ant. Gain

(dB)

Ppq

(dBm)

Limit

(dBm)

Margin

(dB)

CH 01 2412 -0.42 6.57 1.98 8.13 10.00 -1.87

CH 07 2442 -0.26 6.53 1.98 8.25 10.00 -1.75

CH 13 2472 -0.55 6.74 1.98 8.17 10.00 -1.83

Uncertainty ̈́ʳ1.50dB

3.2 Test Result of Peak Power Density for 802.11g

Channel Frequency

(MHz)

Ppr

(dBm)

CF

(dB)

Ant. Gain

(dB)

Ppq

(dBm)

Limit

(dBm)

Margin

(dB)

CH 01 2412 -0.88 6.57 1.98 7.67 10.00 -2.33

CH 07 2442 -0.73 6.53 1.98 7.78 10.00 -2.22

CH 13 2472 -0.94 6.74 1.98 7.78 10.00 -2.22

Uncertainty ̈́ʳ1.50dB

NOTE:

(1) For equipment using FHSS modulation, the peak power density shall be limit to

–10dBW(100mW) per 100kHz E.I.R.P.

(2) For equipment using other types modulation, the peak power density shall be limit

–20dBW(10mW) per MHz E.I.R.P.

(3) Ppr: spectrum read power density (using peak search mode), CF: correct factor,

CF: Correct Factor, AG: Antenna Gain

Ppq: actual peak power density in the spread spectrum band. Ppq = Ppr + CF + AG

(4) The value of table is worst case during test condition, includes different combination s of

transmitter rate, antenna polarity and temperature

(5) The data in the above table are summarizing the following attachment spectrum analyzer hard

copy.

(6) ETSI (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

Test Report -------------------------------------------------------------------------------- 13/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

IEEE 802.11b

CH01

CH07

CH13

Test Report -------------------------------------------------------------------------------- 14/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

IEEE 802.11g

CH01

CH07

CH13

Test Report -------------------------------------------------------------------------------- 15/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

IV. Section 5.2.3 : Frequency Range

4.1 Test Result of Frequency Range for 802.11b

Transmitter Frequency Range – DSSS Equipment

FREQUENCY(MHz)

Lowest Channel Highest Channel

Channel 1 Channel 13

TEST CONDITION

Frequency Rate (Mbps) Frequency Rate (Mbps)

˅ˈк 230 V 2402.30 11 2482.70 11

207 V 2402.20 11 2482.70 11

0к

253 V 2402.20 11 2482.70 11

207 V 2402.30 11 2482.70 11

35к

253 V 2402.30 11 2482.70 11

Measured frequencies

(lowest and highest) FL = 2402.20 MHz FH = 2482.70 MHz

Limit FL > 2400MHz FH < 2483.5MHz

Uncertainty ̈́ʳ1837Hz

Note:

(1) The E.U.T is a stand-alone radio device (see the clause 6.2.2). This is powered by the main.

So, the AC power is used as the extreme voltage source. (see clause 6.3.2.1).

(2) B: Battery, AC: AC Source, Rate: Transmitter Rate.

(3) The value of table is worst case during test condition, includes different combinations of

transmitter rate, antenna polarity and temperature.

(4) The data in the above table are summarizing the following attachment spectrum analyzer

hard copy.

(5) ETSI (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

Test Report -------------------------------------------------------------------------------- 16/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 01 (The lowest one in the frequency range)

Channel 13 (The greatest one in the frequency range)

Test Report -------------------------------------------------------------------------------- 17/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

4.2 Test Result of Frequency Range for 802.11g

Transmitter Frequency Range – DSSS Equipment

FREQUENCY(MHz)

Lowest Channel Highest Channel

Channel 1 Channel 13

TEST CONDITION

Frequency Rate (Mbps) Frequency Rate (Mbps)

˅ˈк 230 V 2402.40 54 2482.70 54

207 V 2402.20 54 2482.90 54

0к

253 V 2402.20 54 2482.90 54

207 V 2402.50 54 2482.60 54

35к

253 V 2402.50 54 2482.60 54

Measured frequencies

(lowest and highest) FL = 2402.20 MHz FH = 2482.90 MHz

Limit FL > 2400MHz FH < 2483.5MHz

Uncertainty ̈́ʳ1837Hz

Note:

(1) The E.U.T is a stand-alone radio device (see the clause 6.2.2). This is powered by the main.

So, the AC power is used as the extreme voltage source. (see clause 6.3.2.1).

(2) B: Battery, AC: AC Source, Rate: Transmitter Rate.

(3) The value of table is worst case during test condition, includes different combinations of

transmitter rate, antenna polarity and temperature.

(4) The data in the above table are summarizing the following attachment spectrum analyzer

hard copy.

(5) ETSI (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

Test Report -------------------------------------------------------------------------------- 18/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 01 (The lowest one in the frequency range)

Channel 13 (The greatest one in the frequency range)

Test Report -------------------------------------------------------------------------------- 19/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

V. Section 5.2.4: Transmitter Spurious Emissions

5.1 Test Result for IEEE 802.11b

Channel 1 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

733.67 H-71.40 -36.00 -35.40 11

234.91 H-65.47 -36.00 -29.47 11

261.59 H-63.07 -36.00 -27.07 11

300.39 H-63.57 -36.00 -27.57 11

325.85 H-66.11 -36.00 -30.11 11

390.72 H-62.52 -36.00 -26.52 11

233.09 V-62.66 -36.00 -26.66 11

261.59 V-65.20 -36.00 -29.20 11

300.39 V-64.06 -36.00 -28.06 11

325.85 V-64.65 -36.00 -28.65 11

391.32 V-62.29 -36.00 -26.29 11

565.92 V-65.87 -36.00 -29.87 11

Note:

(1) A. P. means antenna polarization, horizontal and vertical.

Amplitude means the fundamental emission measured

C F. means Correct Factor, Rate means transmitter rate

Corrected Factor (C. F.) = Cable Loss + Antenna Factor – Amplified Gain

LEVEL = Amplitude + Corrected Factor

(2) The margin is minus that means under limit.

(3) The value of table is the worst case during test condition. This is including different

combinations of transmitter rate antenna polarity and temperature.

(4) ETSI (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

(5) The level of confidence of 95% , the uncertainty of measurement of radiated emission is

+2.85dB / -2.77dB

Test Report -------------------------------------------------------------------------------- 20/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 13 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

234.31 H-65.69 -36.00 -29.69 11

260.98 H-63.16 -36.00 -27.16 11

300.39 H-62.79 -36.00 -26.79 11

325.85 H-65.43 -36.00 -29.43 11

390.72 H-64.34 -36.00 -28.34 11

500.45 H-67.16 -36.00 -31.16 11

234.31 V-62.63 -36.00 -26.63 11

298.57 V-64.46 -36.00 -28.46 11

325.24 V-65.29 -36.00 -29.29 11

390.72 V-65.11 -36.00 -29.11 11

433.76 V-66.09 -36.00 -30.09 11

565.32 V-66.03 -36.00 -30.03 11

Test Report -------------------------------------------------------------------------------- 21/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 1 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

1608.33 H -56.94 -30.00 -26.94 11

2287.50 H -51.17 -30.00 -21.17 11

2462.50 H -50.21 -30.00 -20.21 11

2637.50 H -56.37 -30.00 -26.37 11

9647.40 H -50.29 -30.00 -20.29 11

1608.33 V-64.78 -30.00 -34.78 11

2287.50 V-62.84 -30.00 -32.84 11

2462.50 V-60.88 -30.00 -30.88 11

2595.83 V-63.65 -30.00 -33.65 11

2639.58 V-63.36 -30.00 -33.36 11

9647.40 V-50.45 -30.00 -20.45 11

Channel 13 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

1647.92 H-50.93 -30.00 -20.93 11

2264.58 H-54.20 -30.00 -24.20 11

2287.50 H-50.67 -30.00 -20.67 11

2358.33 H-54.25 -30.00 -24.25 11

9890.21 H-51.21 -30.00 -21.21 11

1647.92 V-59.59 -30.00 -29.59 11

2279.17 V-63.24 -30.00 -33.24 11

2400.00 V-63.90 -30.00 -33.90 11

2597.92 V-61.97 -30.00 -31.97 11

2639.58 V-60.53 -30.00 -30.53 11

9890.21 V-51.04 -30.00 -21.04 11

Test Report -------------------------------------------------------------------------------- 22/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

5.2 Test Result for IEEE 802.11g

Channel 1 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

233.70 H -64.71 -36.00 -28.71 54

260.98 H -61.73 -36.00 -25.73 54

300.39 H -63.83 -36.00 -27.83 54

325.85 H -65.73 -36.00 -29.73 54

390.72 H -63.97 -36.00 -27.97 54

233.09 V -62.73 -36.00 -26.73 54

300.39 V -63.52 -36.00 -27.52 54

325.24 V -63.82 -36.00 -27.82 54

390.72 V -63.15 -36.00 -27.15 54

564.11 V -65.37 -36.00 -29.37 54

Channel 13 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

234.91 H -65.14 -36.00 -29.14 54

261.59 H -62.29 -36.00 -26.29 54

300.39 H -63.50 -36.00 -27.50 54

325.85 H -65.03 -36.00 -29.03 54

391.32 H -62.59 -36.00 -26.59 54

233.09 V -62.51 -36.00 -26.51 54

260.98 V -63.44 -36.00 -27.44 54

300.39 V -63.57 -36.00 -27.57 54

324.64 V -65.54 -36.00 -29.54 54

390.72 V -62.45 -36.00 -26.45 54

Test Report -------------------------------------------------------------------------------- 23/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 1 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

1608.33 H -53.61 -30.00 -23.61 54

2208.33 H -52.83 -30.00 -22.83 54

2279.17 H -49.24 -30.00 -19.24 54

2358.33 H -51.08 -30.00 -21.08 54

2464.58 H -48.53 -30.00 -18.53 54

1608.33 V -60.11 -30.00 -30.11 54

2287.50 V -64.17 -30.00 -34.17 54

2464.58 V -63.03 -30.00 -33.03 54

2639.58 V -62.03 -30.00 -32.03 54

12060.10 V -54.74 -30.00 -24.74 54

Channel 13 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

1647.92 H -47.76 -30.00 -17.76 54

2264.58 H -49.20 -30.00 -19.20 54

2287.50 H -48.84 -30.00 -18.84 54

2400.00 H -50.57 -30.00 -20.57 54

2558.33 H -55.41 -30.00 -25.41 54

12060.10 H -55.74 -30.00 -25.74 54

1647.92 V -56.76 -30.00 -26.76 54

2266.67 V -63.01 -30.00 -33.01 54

2287.50 V -64.84 -30.00 -34.84 54

2560.42 V -61.41 -30.00 -31.41 54

2639.58 V -59.70 -30.00 -29.70 54

12360.73 V -57.12 -30.00 -27.12 54

Test Report -------------------------------------------------------------------------------- 24/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

VI. Section 5.3.2: Receiver Spurious Emissions

6.1 Test Result for IEEE 802.11b

Channel 1 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

233.09 H-64.84 -57.00 -7.84 11

261.59 H-60.83 -57.00 -3.83 11

299.78 H-63.53 -57.00 -6.53 11

325.85 H-66.24 -57.00 -9.24 11

390.72 H-62.76 -57.00 -5.76 11

501.06 H-66.28 -57.00 -9.28 11

233.09 V-62.64 -57.00 -5.64 11

261.59 V-64.54 -57.00 -7.54 11

300.39 V-63.29 -57.00 -6.29 11

325.24 V-65.67 -57.00 -8.67 11

391.32 V-64.93 -57.00 -7.93 11

565.92 V-64.85 -57.00 -7.85 11

Note:

(1) A. P. means antenna polarization, horizontal and vertical.

Amplitude means the fundamental emission measured.

C F. means Correct Factor, Rate means transmitter rate

Corrected Factor (C. F.) = Cable Loss + Antenna Factor – Amplified Gain

LEVEL = Amplitude + Corrected Factor

(2) The value of table is worst case during test condition, includes different combinations of

transmitter rate antenna polarity and temperature

(3) ETSI (2400MHz ~ 2483.5MHz),

FRANCE outdoor use limited to 10mW e.i.r.p. within the band (2454MHz ~ 2483.5MHz)

(4) The level of confidence of 95% , the uncertainty of measurement of radiated emission is

+2.85dB / -2.77dB

Test Report -------------------------------------------------------------------------------- 25/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 13 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

234.31 H-65.06 -57.00 -8.06 11

261.59 H-63.07 -57.00 -6.07 11

300.39 H-63.52 -57.00 -6.52 11

325.24 H-64.50 -57.00 -7.50 11

390.72 H-63.08 -57.00 -6.08 11

501.06 H-66.91 -57.00 -9.91 11

234.31 V-62.45 -57.00 -5.45 11

300.39 V-64.20 -57.00 -7.20 11

325.24 V-66.02 -57.00 -9.02 11

390.72 V-66.17 -57.00 -9.17 11

562.89 V-65.80 -57.00 -8.80 11

721.12 V-66.04 -57.00 -9.04 11

Test Report -------------------------------------------------------------------------------- 26/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 1 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

2189.69 H-65.56 -47.00 -18.56 11

3653.54 H-62.31 -47.00 -15.31 11

5112.50 H-60.21 -47.00 -13.21 11

9415.94 H-56.49 -47.00 -9.49 11

2106.46 V-66.59 -47.00 -19.59 11

3340.21 V-63.00 -47.00 -16.00 11

5274.06 V-60.53 -47.00 -13.53 11

9680.31 V-56.23 -47.00 -9.23 11

Channel 13 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

2091.77 H-66.51 -47.00 -19.51 11

3301.04 H-61.63 -47.00 -14.63 11

5401.35 H-60.25 -47.00 -13.25 11

8813.75 H-56.49 -47.00 -9.49 11

1817.60 V-67.71 -47.00 -20.71 11

2968.12 V-64.20 -47.00 -17.20 11

4975.42 V-60.84 -47.00 -13.84 11

8035.31 V-57.67 -47.00 -10.67 11

Test Report -------------------------------------------------------------------------------- 27/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

6.2 Test Result for IEEE 802.11g

Channel 1 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

234.31 H-65.36 -57.00 -8.36 54

261.59 H-63.40 -57.00 -6.40 54

300.39 H-62.60 -57.00 -5.60 54

391.32 H-63.62 -57.00 -6.62 54

501.06 H-66.24 -57.00 -9.24 54

233.09 V-62.76 -57.00 -5.76 54

261.59 V-65.78 -57.00 -8.78 54

299.78 V-63.63 -57.00 -6.63 54

390.72 V-66.17 -57.00 -9.17 54

667.17 V-66.05 -57.00 -9.05 54

Channel 13 (30MHz to 1GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

233.70 H-64.73 -57.00 -7.73 54

261.59 H-60.69 -57.00 -3.69 54

300.39 H-63.17 -57.00 -6.17 54

390.72 H-63.97 -57.00 -6.97 54

501.06 H-64.87 -57.00 -7.87 54

234.91 V-62.83 -57.00 -5.83 54

299.78 V-63.06 -57.00 -6.06 54

390.72 V-64.00 -57.00 -7.00 54

564.11 V-66.25 -57.00 -9.25 54

721.12 V-65.50 -57.00 -8.50 54

Test Report -------------------------------------------------------------------------------- 28/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Channel 1 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

2101.56 H-65.79 -47.00 -18.79 54

3002.40 H-63.62 -47.00 -16.62 54

4632.71 H-61.56 -47.00 -14.56 54

8025.52 H-57.70 -47.00 -10.70 54

2003.65 V-65.84 -47.00 -18.84 54

3208.02 V-63.52 -47.00 -16.52 54

4892.19 V-60.57 -47.00 -13.57 54

7991.25 V-57.94 -47.00 -10.94 54

Channel 13 (1GHz to 12.75GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

1724.58 H-68.52 -47.00 -21.52 54

2733.12 H-65.34 -47.00 -18.34 54

3820.00 H-61.64 -47.00 -14.64 54

6150.42 H-60.01 -47.00 -13.01 54

1891.04 V-67.25 -47.00 -20.25 54

3002.40 V-64.12 -47.00 -17.12 54

4813.85 V-60.78 -47.00 -13.78 54

8015.73 V-55.72 -47.00 -8.72 54

Test Report -------------------------------------------------------------------------------- 29/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

6.3 Test Result for Standby mode

(30MHz to 12.5GHz)

Frequency

(MHz)

A. P.

(H/V)

LEVEL

(dBm)

Limit

(dBm)

Margin

(dB)

Rate

(Mbps)

74.26 H-70.96 -57.00 -13.96 ---

133.67 H-70.66 -57.00 -13.66 ---

233.70 H-64.85 -57.00 -7.85 ---

261.59 H-63.16 -57.00 -6.16 ---

300.39 H-62.13 -57.00 -5.13 ---

325.24 H-64.48 -57.00 -7.48 ---

390.72 H-61.96 -57.00 -4.96 ---

501.06 H-66.96 -57.00 -9.96 ---

4206.77 H-61.66 -47.00 -14.66 ---

7364.58 H-57.55 -47.00 -10.55 ---

233.09 V-62.66 -57.00 -5.66 ---

260.98 V-64.57 -57.00 -7.57 ---

300.39 V-64.13 -57.00 -7.13 ---

325.85 V-66.69 -57.00 -9.69 ---

390.72 V-66.48 -57.00 -9.48 ---

434.37 V-67.72 -57.00 -10.72 ---

567.14 V-65.96 -57.00 -8.96 ---

666.56 V-65.77 -57.00 -8.77 ---

5690.21 V-59.25 -47.00 -12.25 ---

8769.69 V-56.69 -47.00 -9.69 ---

Test Report -------------------------------------------------------------------------------- 30/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

VII. Instrument and Ancillaries Equipment of List

Calibration Date

Instrument Name Model Brand Serial No. Next time

EMI Receiver 8546A HP 3520A00242 08/05/05

RF Filter Section 85460A HP 3448A00217 08/05/05

Small Biconical

Antenna

UBAA9114 &

BBVU9135

SCHWARZECK 127 10/11/05

Pre-amplifier PA1F TRC 1FAC 05/20/05

Auto Switch Box

(?30MHz)

ASB-01 TRC 9904-01 05/20/05

Coaxial Cable

(Double shielded,

15 meter)

A30A30-0058-50FS-15M JYEBAO SMA-01 05/20/05

Coaxial Cable

(1.1 meter)

A30A30-0058-50FS-1M JYEBAO SMA-02 05/20/05

Spectrum Analyzer 8564E HP 3720A00840 08/13/05

Microwave

Preamplifier

84125C HP US36433002 08/13/05

Horn Antenna 3115 EMCO 9104-3668 12/27/05

Standard Guide

Horn Antenna

84125-80008 HP 18-26.5GHz 10/15/05

Standard Guide

Horn Antenna

84125-80001 HP 26.5-40GHz 10/15/05

Horn Antenna 1196E (3115) HP (EMCO) 9704-5178 01/11/06

Pre-amplifier PA2F TRC 2F1GZ 06/20/05

Coaxial Cable

(3 miter)

A30A30-0058-50FST118 JYEBAO MSA-05 06/20/05

Coaxial Cable

(1 meter)

A30A30-0058-50FST118 JYEBAO MSA-04 06/20/05

Test Report -------------------------------------------------------------------------------- 31/31

Report No.: C51ET050252 (ETSI EN 300 328)

Training Research Co., Ltd., TEL:886-2-26935155, Fax:886-2-26934440

Appendix A

Antenna Specification

Measurement result of WLG-1103 Printed Antenna

Orientation of DUT measured in chamber

Measurement Result

VSWR

YZ

[

Radiation Pattern

1.XY-plane

2.XZ-plane

3.YZ-plane

Test Report ------------------------------------------------------------------------------- 1/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Report No. C51ET050252

Specifications ETSI EN 301 489-1 V1.4.1 (August, 2002)

ETSI EN 301 489-17 V1.2.1 (April, 2002)

Applicant CAMEO COMMUNICATIONS, INC.

Applicant No. 42, Min Chuan East Road, Section 6,

address Taipei 114, Taiwan

Items tested 802.11g Wireless PC Card

Model No. WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,

ALL0282A

EUT Condition Engineering sample; Pre-production; Final production

(Sample # C51050252)

Results Compliance (As detailed within this report)

Date 03/30/2005 (month / day / year) (Sample received)

04/06/2005 to 04/18/2005 (Test)

Prepared by Project Engineer

______________________ (Jack Tsai)

Authorized by General Manager

(Frank Tsai)

Issue date April 21, 2005 (month / day / year)

Modifications None

Tested by Training Research Co., Ltd.

Office at No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan

Laboratory at 1F, No. 255, Nan Yang Street, Shijr City, Taipei Hsien 221, Taiwan

Open site at No. 15, Lane 530, Balian Rd., Sec. 1, Shijr City, Taipei Hsien 221, Taiwan

Conditions of issue:

This test report shall not be reproduced except in full, without written approval of

TRC. And the test result contained within this report only relate to the sample

submitted for testing.

Ϫʳ

Aut. No. ELA 131

Test Report ------------------------------------------------------------------------------- 2/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Generally Statement:

The results appear in the following order:

Electromagnetic compatibility and radio spectrum matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services;

Part 1: Common Technical requirements

Part 17:Specific conditions for Wideband data and HIPERLAN equipment.

The results exhibits below only apply to particular samples tested and to the specific tests

carried out, as detailed in this Test Report. The issue of this Test Report does not indicate any

measure of Approval, Certification, Supervision, Control or Surveillance by Training Research

Co., Ltd. of any product. No extract, abridgement or abstraction from a Test Report may be

published or used to advertise a product without the written consent of the Director, Training

Research Co., Ltd. who reserves the absolute right to agree or reject all or any of the details of

any item of publicity for which consent may be sought.

Test Report ------------------------------------------------------------------------------- 3/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Contents

CHAPTER 0 EMISSION AND SUSCEPTIBILITY STANDARDS........5

EMISSION STANDARDS...............................................................................5

SUSCEPTIBILITY STANDARDS.....................................................................5

CHAPTER 1 INTRODUCTION..............................................................6

DESCRIPTION OF EUT................................................................................6

TEST METHOD ...........................................................................................6

LIST OF SUPPORT EQUIPMENT....................................................................7

CHAPTER 2 EMISSION AND IMMUNITY REQUIREMENTS

OVERVIEW.....................................................................9

EMISSION (ETSI EN 301 489-1) ................................................................9

IMMUNITY (ETSI EN 301 489-1).............................................................10

CHAPTER 3 PERFORMANCE CRITERIA.........................................11

ETSI EN 301 489-17, SUBCLAUSE 6.2 ....................................................11

CHAPTER 4 ELECTROSTATIC DISCHARGES IMMUNITY TEST 17

ESD TEST INFORMATION:........................................................................17

EN 61000-4-2 PHOTO OF TESTSET-UP .............................................19

CHAPTER 5 RADIO FREQUENCY IMMUNITY TEST (RS).............20

RS TEST INFORMATION:...........................................................................20

EN 61000-4-3 PHOTO OF TESTSET-UP .............................................22

CHAPTER 6 ELECTRIC FAST TRANSIENT/

BURST REQUIREMENTS TEST..................................23

EFT TEST INFORMATION: ........................................................................23

EN 61000-4-4 PHOTO OF TESTSET-UP .............................................26

CHAPTER 7 SURGE IMMUNITY TEST.............................................27

SURGE TEST INFORMATION:.....................................................................27

EN 61000-4-5 PHOTO OF TESTSET-UP .............................................29

Test Report ------------------------------------------------------------------------------- 4/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

CHAPTER 8 CONTINUOUS WAVE VOLTAGE IMMUNITY TEST 30

CS TEST INFORMATION:...........................................................................30

TEST INSTRUMENTS: ................................................................................32

EN 61000-4-6 PHOTO OF TESTSET-UP .............................................33

CHAPTER 9 VOLTAGE DIP / INTERRUPTION TEST .....................34

DIP TEST INFORMATION:.........................................................................34

EN 61000-4-11 PHOTO OF TESTSET-UP ...........................................35

CHAPTER 10 HARMONICS TEST........................................................36

CHAPTER 11 VOLTAGE FLUCTUATION AND FLICKER TEST.....37

CHAPTER 12 CONDUCTED EMISSION TEST....................................38

TEST CONDITION AND SETUP ....................................................................38

LIST OF TEST INSTRUMENT ......................................................................39

CONDUCTED TEST PLACEMENT (FRONT VIEW AND SIDE VIEW )...............40

TEST RESULT OF CONDUCTED EMISSIONS FOR MAINS POWER.................41

CHAPTER 13 RADIATED EMISSION TEST........................................42

TEST CONDITION AND SETUP ....................................................................42

LIST OF TEST INSTRUMENT ......................................................................43

RADIATED TEST PLACEMENT (FRONT VIEW AND REAR VIEW ).................44

TEST RESULT OF SPURIOUS RADIATED EMISSIONS ..................................45

Test Report ------------------------------------------------------------------------------- 5/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 0 Emission and Susceptibility Standards

Emission Standards

Emission Standard European Standard International Standard

( ) EN 61000-6-3/2001 IEC 61000-6-3/1996

( ) EN 61000-6-4/2001 IEC 61000-6-4/1997

( ) EN 50081-1/1992

( ) EN 50081-1/8.93

( ) EN 55014/4.93 CISPR 14: 1993

( ) EN 55015/12.93 CISPR 15: 1992

( ) EN 55013/2001 CISPR 13: 2001

( X ) EN 55022/98 +A1/2000 +A2/2003 CISPR 22: 2002

( X ) EN 61000-3-2/2000 IEC 61000-3-2: 2000

( X ) EN 61000-3-3/1995 +A1/2001 IEC 61000-3-3: 1994 +A1/2001

Susceptibility Standards

Susceptibility Standard European Standard International Standard

( ) EN 61000-6-1/2001 IEC 61000-6-1/1997

( ) EN 61000-6-2/2001 IEC 61000-6-2/1999

( ) EN 50082-1/1997

( ) EN 50082-2/1994

( ) EN 55024/1998

+A1/2001+A2/2003

CISPR 24/1997

( ) EN 55020/2002 CISPR 20/2002

( X ) EN 61000-4-2:2001 IEC 61000-4-2:2001

( X ) EN 61000-4-3:2002 +A1/2002 IEC 61000-4-3:2002 +A1/2002

( X ) EN 61000-4-4:1995

+A1/2000 +A2/2001

IEC 61000-4-4:1995

+A1/2000+A2/2001

( X ) EN 61000-4-5:2001 IEC 61000-4-5:2001

( X ) EN 61000-4-6:2003 IEC 61000-4-6:2003

( ) EN 61000-4-8:2001 IEC 61000-4-8:2001

( X ) EN 61000-4-11:2001 IEC 61000-4-11:2001

Test Report ------------------------------------------------------------------------------- 6/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 1 Introduction

Description of EUT

Product Name : 802.11g Wireless PC Card

Model No. : WLG-1103, WPC-0300, LWS5410N, NWP-0208-G,

ALL0282A

Frequency Range : 2.400GHz ~ 2.4835GHz

Operating Frequency : 2.412GHz ~ 2.472GHz

Support Channel : 13 Channels

Modulation Skill : DBPSK, DQPSK, CCK, OFDM

Power Type : Powered by PCMCIA interface of client’ s device

Power Cable : None

Data Cable : None

Test Method

1. Insert the EUT into the PCMCIA bus of the notebook computer.

2. Using the notebook computer and software provided by the manufacturer to control

EUT, the test is performed under the specific conditions.

3. Then making EUT to the following mode.

(a) EMI testing: During test, making EUT to the linking mode with support equipments

(b) EMS testing: same as above

Test Report ------------------------------------------------------------------------------- 7/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

List of Support Equipment

In order to construct the minimum testing, following equipment were used as the support

units.

Notebook : IBM Think Pad X20

Model No. : 2662-11T

Serial No. : FX-1192200/09

FCC ID : N/A, DoC (Declaration of Confirmation) Approved

BSMI : 3892B565

Adaptor : IBM

Model No. : PA2450U

Serial No. : 02K6654

FCC ID : N/A, DoC Approved

Power type : I/P: 100 ~ 240vac, 50 ~ 60 Hz, 0.5A ~ 1.2A; O/P: 16Vdc, 4.5A

Power cord : Non-shielded, 1.80m length, Plastic, with ferrite core

Fax/Modem : Aceex

Model No. : DM-1414

Serial No. : 9010582, 9010583

FCC ID : IFAXDM1414

Power type : 110 VAC / 50 ~ 60 Hz, Switching

Power Cord : Non-shielded, 1.90m long, Plastic hoods, and no ferrite bead

Data Cable : RS-232ШShielded, 1.30m long, Metal hoods , No bead

RJ-11Cx2ШNon-shielded, 7’ long, Plastic hoods, No bead

Printer : EPSON; HP

Model No. : B241A, C2642A

Serial No. : FAPY155090, SG69A196GV

FCC ID : None (DoC Approved), B94C2642X

BSMI : R33126, None

Power type : Switching adaptor

Power cord : Non-shielded, 173cm length, No ferrite core

(between adaptor and AC source)

Non-shielded, 180cm length, with ferrite core

(between printer and adaptor)

Data cable : Shielded, 1.70m length, No ferrite core

Test Report ------------------------------------------------------------------------------- 8/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

USB Game pad : Padix, Rockfire

Model No. : QF-305u, QF-337uv

Serial No. : 81100848, KR91379759

FCC ID : DoC Approved, None (CE approval)

BSMI : None, 3862A574

Power type : By PC

Data cable : Shielded, 1.76m length no ferrite core (1.81m with ferrite core)

Mouse : HP

Model No. : M-UR89, M-S34

Serial No. : LZS21750238, LZC84446151

FCC ID : DoC Approved, DZL211029

BSMI : 3892D767, 4862A011

Power type : By PC

Power cord : Shielded, 1.80m length, No ferrite core

Notebook PC : Twinhead

Model No. : N222S

Serial No. : SY3261000988

FCC ID : DoC (Declaration of Confirmation) Approved

BSMI : 71001018

Power adaptor : LI Shin International Enterprise Corp.

Model No. : LSE9802A2060

Serial No. : A20231065818

FCC ID : DoC Approved

BSMI : 3882B381

Power type : 100 ~ 240VAC / 50 ~ 60Hz, 1.5A, Switching

Power cord : Non-shielded, 1.0m length, Plastic hood, No ferrite core

(Main power to adaptor)

Shielded, 1.5m length, Plastic hood, ferrite core

(DC plug to adaptor)

WLAN Card : Gemtek Technology Co., Ltd.

Model No. : C911003

FCC ID : MXF-C911003

Test Report ------------------------------------------------------------------------------- 9/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 2 Emission and Immunity Requirements Overview

Emission (ETSI EN 301 489-1)

Equipment test requirementPhenomenon Application

Radio and

ancillary

equipment for

fixed use (base

station

equipment)

Radio and

ancillary

equipment for

vehicular use

(mobile

equipment)

Radio and

ancillary

equipment for

portable use

(portable

equipment)

Reference

Subclause in

the present

document

Radiated

emission

Enclosure of

ancillary

equipment

Applicable for

stand alone

testing

Applicable for

stand alone

testing

Applicable for

stand alone

testing

8.2

Conducted

emission

DC power

input/output

port

Applicable Applicable Not applicable 8.3

Conducted

emission

AC mains

input/output

port

Applicable Not applicable Not applicable 8.4

Harmonic

current

emissions

AC mains

input port

Applicable Not applicable Not applicable 8.5

Voltage

fluctuations

and flicker

AC mains

input port

Applicable Not applicable Not applicable 8.6

Test Report ------------------------------------------------------------------------------- 10/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Immunity (ETSI EN 301 489-1)

Equipment test requirementPhenomenon Application

Radio and

ancillary

equipment for

fixed use (base

station

equipment)

Radio and

ancillary

equipment for

vehicular use

(mobile

equipment)

Radio and

ancillary

equipment for

portable use

(portable

equipment)

Reference

Subclause in

the present

document

RF

electromagnetic

field ( 80MHz to

1GHz)

Enclosure Applicable Applicable Applicable 9.2

Electrostatic

discharge

Enclosure Applicable Applicable Applicable 9.3

Fast transients

common mode

Signal,

telecommunication

and control ports,

DC and AC power

ports

Applicable Not

applicable

Not

applicable

9.4

RF common

mode 0.15 MHz

to 80MHz

Signal,

telecommunication

and control ports,

DC and AC power

ports

Applicable Applicable Not

applicable

9.5

Transients and

surges

DC power input

ports

Not applicable Applicable Not

applicable

9.6

Voltage dips and

interruptions

AC mains power

input ports

Applicable Not

applicable

Not

applicable

9.7

Surges, line to

line and line

ground

AC mains power

input ports,

telecommunication

ports

Applicable Not

applicable

Not

applicable

9.8

Test Report ------------------------------------------------------------------------------- 11/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 3 Performance Criteria

ETSI EN 301 489-17, Subclause 6.2

Table 1 Performance criteria

Criteria During test After test

AShall operate as intended

May show degradation of

performance (NOTE 1)

Shall be no loss of function

Shall be no unintentional

transmissions

Shall operate as intended

Shall be no degradation of performance

(NOTE 2)

Shall be no loss of function

Shall be no loss of stored data or user

programmable functions

BMay show loss of function (one or

more)

May show degradation of

performance (NOTE 1)

No unintentional transmissions

Function shall be self-recoverable

Shall operate as intended after recovering

Shall be no degradation of performance

(NOTE 2)

Shall be no loss of stored data or user

programmable functions

CMay be loss of function (one or

more)

Functions shall be recoverable by the

operator

Shall operate as intended after recovering

Shall be no degradation of performance

(NOTE 2)

Test Report ------------------------------------------------------------------------------- 12/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

NOTE 1:

Degradation of performance during the test is understood as a degradation to a level not

below a minimum performance level specified by the manufacturer for the use of the apparatus

as intended. In some cases the specified minimum performance level may be replaced by a

permissible degradation of performance.

If the minimum performance level or the permissible performance degradation in not

specified by the manufacturer then either of these may be derived from the product description

and documentation (including leaflets and advertising) and what the user may reasonably expect

form the apparatus if used as intended.

NOTE 2:

No degradation of performance after the test is understood as no degradation below a

minimum performance level specified by the manufacturer for the use of the apparatus as

intended. In some cases the specified minimum performance level may be replaced by a

permissible degradation of performance. After the test no change of actual operating data or user

retrievable data is allowed.

If the minimum performance level or the permissible performance degradation in not

specified by the manufacturer then either of these may be derived from the product description

and documentation (including leaflets and advertising) and what the user may reasonably expect

form the apparatus if used as intended.

Test Report ------------------------------------------------------------------------------- 13/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

ETSI EN 301 489-1

Performance criteria for Continuous phenomena applied Transmitters (CT)

If no further details are given in the relevant part of the present document dealing with the

particular type of radio equipment, the following general performance criteria for continuous

phenomena shall apply.

During and after the test:

The apparatus shall continue to operate as intended. No degradation of performance or loss

of function is allowed below a permissible performance level specified by the manufacturer

when the apparatus is used as intends. In some cases this permissible performance level may

be replaced by a permissible loss of performance.

During the test:

The EUT shall not unintentionally transmit or change its actual operating state and stored

data. If the minimum performance level or the permissible loss is not specified by the

manufacturer, then either of these may be deduced from the product description and

documentation and what the user may reasonably expect form the apparatus if used as

intended.

For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause

6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or

transmitter in which case the corresponding performance criteria above shall apply.

Performance criteria for Transient phenomena applied Transmitters (TT)

If no further details are given in the relevant part of the present document dealing with the

particular type of radio equipment, the following general performance criteria for transient

phenomena shall apply.

After the test:

The apparatus shall continue to operate as intended. No degradation of performance or loss

of function is allowed below a permissible performance level specified by the manufacturer

when the apparatus is used as intends. In some cases this permissible performance level may

be replaced by a permissible loss of performance.

During the test:

The EMC exposure to an electromagnetic phenomenon, a degradation of performance is,

however, allowed. No change of the actual mode of operation (e.g. unintended transmission)

or stored data is allowed.

Test Report ------------------------------------------------------------------------------- 14/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

If the minimum performance level or the permissible loss is not specified by the

manufacturer, Then either of these may be deduced from the product description and

documentation and what the user may reasonably expect form the apparatus if used as

intended.

For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause

6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or

transmitter in which case the corresponding performance criteria above shall apply.

Performance criteria for Continuous phenomena applied Receivers (CR)

If no further details are given in the relevant part of the present document dealing with the

particular type of radio equipment, the following general performance criteria for continuous

phenomena shall apply.

During and after the test:

The apparatus shall continue to operate as intended. No degradation of performance or loss

of function is allowed below a permissible performance level specified by the manufacturer

when the apparatus is used as intends. In some cases this permissible performance level may

be replaced by a permissible loss of performance.

During the test:

The EUT shall not unintentionally transmit or change its actual operating state and stored

data. If the minimum performance level or the permissible loss is not specified by the

manufacturer, then either of these may be deduced from the product description and

documentation and what the user may reasonably expect form the apparatus if used as

intended.

For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause

6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or

transmitter in which case the corresponding performance criteria above shall apply.

Test Report ------------------------------------------------------------------------------- 15/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Performance criteria for Transient phenomena applied Receivers (TR)

If no further details are given in the relevant part of the present document dealing with the

particular type of radio equipment, the following general performance criteria for transient

phenomena shall apply.

After the test:

The apparatus shall continue to operate as intended. No degradation of performance or loss

of function is allowed below a permissible performance level specified by the manufacturer

when the apparatus is used as intends. In some cases this permissible performance level may

be replaced by a permissible loss of performance.

During the test:

The EMC exposure to an electromagnetic phenomenon, a degradation of performance is,

however, allowed. No change of the actual mode of operation (e.g. unintended transmission)

or stored data is allowed.

If the minimum performance level or the permissible loss is not specified by the

manufacturer, then either of these may be deduced from the product description and

documentatio n and what the user may reasonably expect form the apparatus if used as

intended.

For ancillary equipment the pass/failure criteria supplied by the manufacturer (see subclause

6.4) shall apply, unless the ancillary equipment is tested in connection with a receiver or

transmitter in which case the corresponding performance criteria above shall apply.

Test Report ------------------------------------------------------------------------------- 16/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

ETSI EN 301 489-17

Performance criteria for Continuous phenomena applied Transmitters (CT)

The performance criteria A shall apply.

Tests shall be repeated with the EUT in standby mode (if applicable) to ensure that

unintentional transmission does not occur. In systems using acknowledgement signals, it is

recognized that an ACKnowledgement (ACK) or Not ACKnowledgement (NACK) transmission

may occur, and steps should be taken to ensure that any transmission resulting from the

application of the test is correctly interpreted.

Performance criteria for Transient phenomena applied Transmitters (TT)

The performance criteria B shall apply, except for voltage dips of 100ms and voltage

interruptions of 5000 ms duration, for which performance criteria C shall apply.

Tests shall be repeated with the EUT in standby mode (if applicable) to ensure that unintentional

transmission does not occur. In system using acknowledgement signals, it is recognized that an

acknowledgement (ACK) or not-acknowledgement (NACK) transmission may occur, and steps

should be taken to ensure that any transmission resulting from the application of the test is

correctly interpreted.

Performance criteria for Continuous phenomena applied Receivers (CR)

The performance criteria A shall apply.

Where the EUT is a transceiver, under no circumstances, shall the transmitter operate

unintentionally during the test. In systems using acknowledgement signals, it is recognized that

an ACK or NACK transmission may occur, and steps should be taken to ensure that any

transmission resulting from the application of test is correctly interpreted.

Performance criteria for Transient phenomena applied Receivers (TR)

The performance criteria B shall apply, except for voltage dips of 100ms and voltage

interruptions of 5000 ms duration, for which performance criteria C shall apply.

Where the EUT is a transceiver, under no circumstances, shall the transmitter operate

unintentionally during the test. In systems using acknowledgement signals, it is recognized that

an ACK or NACK transmission may occur, and steps should be taken to ensure that any

transmission resulting from the application of test is correctly interpreted.

Test Report ------------------------------------------------------------------------------- 17/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 4 Electrostatic Discharges Immunity Test

ESD Test information:

Test setup: Shielded room, According to EN 61000-4-2

Test setup for table-top equipment at laboratory tests:

0.1 m

Ground Reference Plane

Wooden table H=0.8m

470koh

m

Resistor

Insulation

Power Supply

VP

C

0.5m X 0.5m

H

orizontal coupling place

1.6m X 0.8m

Typical position for

indirect discharge to VCP

Typical position for

indirect discharge

Typical position for

indirect discharge to HCP

Test Report ------------------------------------------------------------------------------- 18/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test levels: (Apply Level 2 and Level 3)

1a — Contact discharge 1b — Air discharge

Level Test voltage

(kV)

Level Test voltage

(kV)

12 12

2424

36 3 8

48 415

X Special X Special

NOTE: “X” is an open level. The level has to be specified in the dedicated equipment specification. If

higher voltages than those shown are specified, special test equipment may be needed.

Test Voltage: ( X ) 4KV contact discharge

( X ) 8KV air discharge

Indirect Discharges: ( X ) HCP

( X ) VCP

Polarity: ( X ) Positive

( X ) Negative

Test mode: Refer to Test method of Chapter 1

Test instruments:

Name Model Number Serial Number Selected

Best Plus BURST ESD

SURGE TRANSIENTS

Best Plus V6.2 199749-019SC

BEST EMC Test

Instrument

BEST EMC V2.3

(-8, -9)

199918-006SC

SCHAFFNER EMV

AG

NSG 438

INA 4380

253 X

Comment:

Performance Criteria: (According to ETSI EN 301 489-1)

( X ) Enclosure ( )CT ( X )TT ( ) CR ( X )TR

( ) Signal and control ports ( )CT ( )TT ( ) CR ( )TR

Test Report ------------------------------------------------------------------------------- 19/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

EN 61000-4-2 PHOTO OF TEST SET-UP

Test Report ------------------------------------------------------------------------------- 20/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 5 Radio Frequency Immunity Test (RS)

RS Test information:

Test setup: GTEM cell

Radiated Immunity Test Setup

Test levels: (Apply Level 2)

Level Test Field Strength

(V/m)

11

2 3

310

X Special

NOTE: the “X” is an open test level. This level may be given in the product specification.

High Power

Amplifier

Signal

Generator

Modulation

Generator

EU

T

GTEM Cell

EUT Performance

Monitor

Model 7110 Data

Processing / Interface Unit

Model 7122 Companion

Metering Unit

Model 7122

Isotropic Probe

Test Report ------------------------------------------------------------------------------- 21/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Field strength: ( X ) 3V/m at 80 ~ 1000 MHz

( X ) 3V/m at 1400 ~ 2000 MHz

Modulation: ( ) FM %

( X ) 80% AM Modulation with 1KHz

( ) 80% AM Modulation with 400Hz when signal is modulated at 1kHz

( ) 900 KHz²5 KHz with PM 200 Hz and 100% depth

Step size: ( X ) 1% step size

Sweep time: ( X ) 2.5 Second

Test mode: Ref. Test method of Chapter 1

Test instruments:

Name Model Number Serial Number Selected

EMCO GTEM 5317 9411-1123 X

EMCO Probe 7122 9406-1194 X

EMCO METERING UNIT 7122 9406-1194 X

EMCO data interface 7110 9410-1273 X

HP Personal Computer D3178A 3438S00486 X

HP Signal Generator 8657B 2928U00286 X

HP Signal Generator 83711A 3429A00434 X

IFI Wideband Amplifier SMX50 467-0795 X

Min-circuit Amplifier GFL-2500VH N/A X

WG radiation meters EMC-20 BN2244129 X

WG E-filed 2244 / 90.20 Z-0001 X

HP Transmission Test Set 4935A 3115A24046 X

B & K Precision Sound Level Meter Type 2232 1810564 X

Comment:

Performance Criteria: (According to ETSI EN 301 489-1)

( X ) Enclosure ( X )CT ( )TT ( X ) CR ( )TR

Test Report ------------------------------------------------------------------------------- 22/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

EN 61000-4-3 PHOTO OF TEST SET-UP

Test Report ------------------------------------------------------------------------------- 23/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 6 Electric Fast Transient/Burst Requirements Test

EFT Test information:

General test set-up for laboratory type tests:

> 0.25 m

> 0.25 m

EUT

EUT

AC mains

supply

EUT

EFT/B-

generator

Coupling / decoupling

network (A)

Non-metallic

table

EUT

0.1 m

R

eference

plane

E

FT/B-

generator (B)

0.1 m

AC mains

supply

Capacitive

coupling clamp

Grounding connect

i

on

according to the

manufacturer’ s

specification.

Length to be specified

in the test plan.

I

nsulating

support

R

eference

plane

(L)

(L) = length between clamp and EUT to be tested, should

not be more than 1-meter

(A) = location for supply line coupling

(

B

)

= location for si

g

nal lines cou

p

lin

g

(L)

> 0.25 m

> 0.25 m

Test Report ------------------------------------------------------------------------------- 24/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test levels: (Apply Level 2)

Open-circuit output test voltage (±10%) and repetition rate of the impulses (±20%)

On power supply port, PE On input/output signal, data and

control ports

Level Voltage peak

kV

Repetition rate

kHz

Voltage peak

kV

Repetition rate

kHz

1 0.5 5 0.25 5

2 1 5 0.5 5

32 5 1 5

4 4 2.5 2 5

X Special Special Special Special

NOTE: the “X” is an open level. The level has to be specified in the dedicated equipment specification

Test setup: According to EN 61000-4-4

Test Voltage: DC Power line ( ) 0.5 KV, 5 KH

AC Power line ( X ) 1 KV, 5 KHz

Signal & Control line ( ) 0.5 KV, 5 KHz; ( ) 1 KV, 5 KHz

Polarity: ( X ) Positive

( X ) Negative

Test Duration: ( X ) 1 minute

( ) 3 minutes

Connected lines: ( ) Power line shielded

( X ) Power line non-shielded

( ) Signal & Control line non-shielded

( ) Signal & Control line shielded

Test Report ------------------------------------------------------------------------------- 25/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test mode: Ref. Test method of Chapter 1.

Test instrument:

Name Model Number Serial Number Selected

Best Plus BURST ESD

SURGE TRANSIENTS

Best Plus V6.2 199749-019SC

BEST EMC Test

Instrument

BEST EMC V2.3

(-8, -9)

199918-006SC

KeyTek Instrument

EFT Test system

E412 9505206/505207 X

Comment:

Performance Criteria: (According to ETSI EN 301 489-1)

( ) Signal and control ports ( )CT ( )TT ( ) CR ( )TR

( ) DC power input ports ( )CT ( )TT ( ) CR ( )TR

( X ) AC mains input ports ( )CT ( X )TT ( ) CR ( X )TR

Test Report ------------------------------------------------------------------------------- 26/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

EN 61000-4-4 PHOTO OF TEST SET-UP

Test Report ------------------------------------------------------------------------------- 27/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 7 Surge Immunity Test

Surge Test information:

Test setup: According to EN 61000-4-5

Test levels: (Apply Level 2 and Level 3)

Level Test Field Strength

(kV)

1 0.5

2 1.0

3 2.0

4 4.0

X Special

NOTE: the “X” is an open class. This level may be specified in the product specification.

Test Voltage: DC Power line ( ) 0.5 KV

AC Power line ( ) Line – Line: 1KV

( ) Line – Ground: 2KV

( X ) Line – Line: 0.5KV

( X ) Line – Ground: 1KV

Control line ( ) 0.5 KV

Signal ( ) 1 KV, ( ) 0.5KV

Time: ( X ) 1.2/50µs [8/20µs]

Polarity: ( X ) Positive

( X ) Negative

Connected lines: ( ) Power line shielded

( X ) Power line non-shielded

( ) Signal & Control line non-shielded

( ) Signal & Control line shielded

Test mode: Ref. Test method of Chapter 1.

Test Report ------------------------------------------------------------------------------- 28/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test instrument:

Name Model Number Serial Number Selected

Best Plus BURST ESD

SURGE TRANSIENTS

Best Plus V6.2 199749-019SC

BEST EMC Test

Instrument

BEST EMC V2.3

(-8, -9)

199918-006SC

KeyTek Pulsed-EMI

Test System

E103, 501B, E502B,

E503, E505A,

E4552A

0008260 ~0008264,

0008254

X

Comment:

Performance Criteria: (According to ETSI EN 301 489-1)

( X ) AC mains input ports ( )CT ( X )TT ( ) CR ( X )TR

( ) Signal and control ports ( )CT ( )TT ( ) CR ( )TR

Test Report ------------------------------------------------------------------------------- 29/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

EN 61000-4-5 PHOTO OF TEST SET-UP

Test Report ------------------------------------------------------------------------------- 30/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 8 Continuous Wave Voltage Immunity Test

CS Test information:

Test setup: According to EN 61000-4-6

Immunity test to RF conducted disturbances:

Test levels: (Apply Level 2)

Frequency range 150kHz to 80MHz

Voltage level (e.m.f.)

Level Uo [dB(µv)] Uo [V]

1 120 1

2 130 3

3 140 10

X Special

NOTE: the “X” is an open test level.

CDN

Auxiliary

equipment 1

Equipment

under test CDN

Auxiliary

equipment 1

T

Ground reference plane

0.1 m

support

RF — generator

T2

Test generator

T: Termination 50ohm

T

2

:

Power attenuato

r

(6dB)

CDN: Coupling and

decoupling network

Test Report ------------------------------------------------------------------------------- 31/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Frequency: ( X ) 0.15 ~ 80MHz

Modulation: ( ) FM %

( X ) 80% AM Modulation with 1kHz

( ) 80% AM Modulation with 400Hz when signal is modulated at 1kHz

( ) 900 MHz²5 MHz with PM 200 Hz and 50% duty cycle

Step size: ( ) Performed over the frequency range 150kHz to 80MHz with the

exception of an exclusion band for transmitters, and for receivers and

duplex transceivers

( X ) For receivers and transmitters the stepped frequency increments shall

be 1% frequency increment of the momentary frequency in the

frequency range 150kHz to 80MHz, unless specified otherwise in the

part of EN 301 489 dealing with the particular type of radio equipment

Field strength: ( ) 1Vrms

( X ) 3Vrms

( ) 10Vrms

Connected lines: ( ) Power line shielded

( X ) Power line non-shielded

( ) Signal & Control line non-shielded

( ) Signal & Control line shielded

Test mode: Ref. Test method of Chapter 1

Test Report ------------------------------------------------------------------------------- 32/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test instruments:

Name Model Number Serial Number Selected

FRANKONIA EMV–Mess–

System

CIT-10 103A3113 X

FRANKONIA CDN M2+M3 A3011015 X

FRANKONIA CDN T2-801 A3010002

FRANKONIA CDN T4-801 A3015004

FRANKONIA CDN S1-801 A3005002

SCHAFFNER FM-Koppelzange KEMZ 801 17045

SCHAFFNER RF-SYNTHE

SIZERIAMP21FIER

NSG 2070-1 1020

SCHAFFNER CDN M325 13773

SCHAFFNER CDN M216 15604

SCHAFFNER CDN T004 15230

SCHAFFNER CDN S501 15167

SCHAFFNER FM-Koppelzange KEMZ 801 14301

HP Transmission Test Set 4935A 3115A24046

B & K Precision Sound Level Meter Type 2232 1810564

Comment:

Performance Criteria: (According to ETSI EN 301 489-1)

( ) Antenna port ( )CT ( )TT ( ) CR ( )TR

( ) Signal and control ports ( )CT ( )TT ( ) CR ( )TR

( ) DC power input ports ( )CT ( )TT ( ) CR ( )TR

( X ) AC mains input ports ( X )CT ( )TT ( X ) CR ( )TR

Test Report ------------------------------------------------------------------------------- 33/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

EN 61000-4-6 PHOTO OF TEST SET-UP

Test Report ------------------------------------------------------------------------------- 34/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 9 Voltage DIP / Interruption Test

DIP Test information:

Test setup: According to EN 61000-4-11

Voltage dips : ( X ) 30%, 0.01 Second

( X ) 60%, 0.1 Second

Voltage interruptions: ( X ) > 95%, 5 Seconds

Test mode: Ref. Test method of Chapter 1

Test instruments:

Name Model Number Serial Number Selected

Best Plus BURST ESD

SURGE TRANSIENTS

Best Plus V6.2 199749-019SC

BEST EMC Test

Instrument

BEST EMC V2.3

(-8, -9)

199918-006SC

Partner EMS Tester Transienter-1000 PIO X

Comment:

Performance Criteria: (According to ETSI EN 301 489-1)

Dips 30%: ( X ) CT ( ) TT ( X ) CR ( ) TR

Dips 60%: ( ) CT ( ) TT ( ) CR ( ) TR

Interruptions >95%: ( ) CT ( ) TT ( ) CR ( ) TR

No unintentional responses shall occur at the end of the test;

( )Event of loss of function(s) ( )Event of loss of user stored data

Performance Criteria: (According to ETSI EN 301 489-17)

Dips 60%, 100 ms : ( ) A ( ) B ( X ) C

Interruptions >95%, 5 000 ms: ( ) A ( ) B ( X ) C

Test Report ------------------------------------------------------------------------------- 35/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

EN 61000-4-11 PHOTO OF TEST SET-UP

Test Report ------------------------------------------------------------------------------- 36/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 10 Harmonics Test

Test information:

Test setup: According to EN 61000-3-2

Test item: Quasi – stationary & Fluctuating Current Harmonics Test.

Test mode: Ref. Test method of Chapter 1

Test instrument:

Name Model Number Serial Number Selected

Harmonic/

Flicker Test System

HP 6842A 3531A-00102 X

Test Equipment Settings: Quasi-stationary Current

Harmonics Test

Fluctuating Current

Harmonics Test

Line Voltage 230VAC 230VAC

Line Frequency 50Hz 50Hz

Device Class D D

Test Limit Overrides None None

Total Number of Failures: None None

Total Number of Errors: None None

Test Result: Pass

Test Report ------------------------------------------------------------------------------- 37/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 11 Voltage Fluctuation and Flicker Test

Test information:

Test setup: According to EN 61000-3-3

Test mode: Ref. Test method of Chapter 1

Test instrument:

Name Model Number Serial Number Selected

Harmonic/Flicker Test

System

HP 6842A 3531A-00102 X

Test Equipment Settings:

Line Voltage 230VAC

Line Frequency 50Hz

Test Limit Overrides None

Total Number of Failures: Pst: (0), Plt: (0)

Dc: (0), Dmax (0), Dt (0)

Total Number of Errors: None

Test Result: Pass

Test Report ------------------------------------------------------------------------------- 38/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 12 Conducted Emission Test

Test condition and setup

All the equipment is placed and setup according to EN 55022.

Mains power:

The EUT is assembled on a wooden table, which is 80 cm high and placed 40 cm from the

back-wall, which is a vertical conducting plane. One LISN is for EUT, the other LISN is for

support equipment. They are all placed on the conductive ground. The EUT’ s LISN connect a

line switch box for selecting L1 or L2, then connect to a preamplifier and spectrum.

The spectrum scans from 150KHz to 30MHz. Conducted emission levels are detected at

maximum peak mode. But if the maximum peak mode failed or over average limit, it will be

measured by average detection mode.

While testing the worst-emission plot printed in the peak detection mode, and there are up

to 6 highest emissions to be recorded. The plot is kept as the original data and not included in the

test report.

Test Report ------------------------------------------------------------------------------- 39/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

List of test Instrument

Calibration Date

Instrument Name Model Brand Serial No. Next time

EMI Receiver 8546A HP 3520A00242 08/05/05

RF Filter Section 85460A HP 3448A00217 08/05/05

LISN

(EUT)

LISN-01 TRC 99-05 10/07/05

LISN

(Support E.)

LISN-01 TRC 9912-03, 04 11/04/05

Pre-amplifier 15542 ZFL-500 Mini –

Circuits

0 0117 05/20/05

6dB

Attenuator

MCL BW-S6W2 Mini –

Circuits

9915 –

Conducted

05/20/05

10dB

Attenuator

A5542 VAT010 Mini –

Circuits

0215 –

Conducted

05/20/05

Coaxial Cable

(2 meter)

A30A30-0058-50FS-2M Jyebao SMA-08 05/20/05

Coaxial Cable

(1.1 meter)

A30A30-0058-50FS-1M Jyebao SMA-09 05/20/05

Coaxial Cable

(20 meter)

RG-214/U Jyebao NP-01 05/20/05

Coaxial Cable

(20 meter)

RG-214/U Jyebao NP-02 05/20/05

Auto Switch Box

(< 30MHz)

ASB-01 TRC 9904-01 05/20/05

The level of confidence of 95%, the uncertainty of measurement of conducted emission is +2.43dB / -2.53dB.

Test Report ------------------------------------------------------------------------------- 40/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Conducted Test Placement (Front view and Side view)

Test Report ------------------------------------------------------------------------------- 41/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Result of Conducted Emissions for Mains power

Testing room : Temperature : 25 ° C Humidity : 73 % RH

Line 1

READING AMPLITUDE LIMIT

Frequency

(kHz)

Peak

(dB

µ

V)

Quasi-Peak

(dB

µ

V)

Average

(dB

µ

V)

Quasi-Peak

(dB

µ

V)

Average

(dB

µ

V)

Margin

(dB)

220.000 43.68 --- --- 64.00 54.00 -10.32

884.000 42.16 --- --- 56.00 46.00 -3.84

1208.000 39.52 --- --- 56.00 46.00 -6.48

1766.000 42.16 --- --- 56.00 46.00 -3.84

2094.000 40.79 --- --- 56.00 46.00 -5.21

2741.000 41.75 --- --- 56.00 46.00 -4.25

3304.000 43.39 36.99 32.58 56.00 46.00 -13.42

4131.000 41.37 --- --- 56.00 46.00 -4.63

6170.000 40.13 --- --- 60.00 50.00 -9.87

7610.000 39.66 --- --- 60.00 50.00 -10.34

Line 2

READING AMPLITUDE LIMIT

Frequency

(kHz)

Peak

(dB

µ

V)

Quasi-Peak

(dB

µ

V)

Average

(dB

µ

V)

Quasi-Peak

(dB

µ

V)

Average

(dB

µ

V)

Margin

(dB)

329.000 42.41 --- --- 60.89 50.89 -8.48

884.000 41.47 --- --- 56.00 46.00 -4.53

1219.000 40.22 --- --- 56.00 46.00 -5.78

1766.000 42.07 --- --- 56.00 46.00 -3.93

1977.000 40.96 --- --- 56.00 46.00 -5.04

2820.000 40.33 --- --- 56.00 46.00 -5.67

4288.000 40.72 --- --- 56.00 46.00 -5.28

6270.000 42.64 --- --- 60.00 50.00 -7.36

Note:

1. The reading amplitudes are all under limit.

2. Testing result = Amplitude reading + Correction factor (Insertion loss of LISN, Cable loss,

Attenuator, Amplifier and so on)

Test Report ------------------------------------------------------------------------------- 42/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Chapter 13 Radiated Emission Test

Test condition and setup

Pretest: Prior to the final test (OATS test), the EUT is placed in a shielded enclosure,

and scan from 30MHz to 1GHz. This is done to ensure the radiation is exactly emitted from the

EUT.

Final test: Final radiation measurements are made on a 10 – meter, open-field test

site. The EUT is placed on a nonconductive table, which is 0.8m height, the top surface is 1.0 x

1.5 meter. The entire placement is according to EN 55022.

The whole range antenna is used to measure frequency from 30 MHz to 1GHz. The final

test is used the spectrum analyzer (EMI Receiver). Measure more than six top marked

frequencies generated form pretest by computer step by step at each frequency.

The EUT is rotated 360 degrees, and antenna is raised and lowered from 1 to 4 meters to

find the maximum emission levels. The antenna is used with both horizo ntal and vertical

polarization.

Appropriated preamplifier which is made by TRC is used for improving sensitivity and

precautions is taken to avoid overloading .The spectrum analyzer’ s 6dB bandwidth is set to 120

kHz, and the EUT is measured at quasi-peak (below 1GHz) mode.

If the emission is close to the frequency band of ambient, the tester will recheck the data

and the corrected data will be written in the test data sheet. If the emission is just within the

ambient, the data from shielded room will be taken as the final data.

Test Report ------------------------------------------------------------------------------- 43/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

List of test Instrument

Calibration Date

Instrument Name Model Brand Serial No. Next time

EMI Receiver 8546A HP 3520A00242 08/05/05

RF Filter Section 85460A HP 3448A00217 08/05/05

Small Biconical

Antenna

UBAA9114 &

BBVU9135

SCHWARZECK 127 10/11/05

Pre-amplifier PA1F TRC 1FAC 05/20/05

Auto Switch Box

(>30MHz)

ASB-01 TRC 9904-01 05/20/05

Coaxial Cable

(Double shielded,

15 meter)

A30A30-0058-50FS-15M JYEBAO SMA-08 05/20/05

Coaxial Cable

(1.1 meter)

A30A30-0058-50FS-1M JYEBAO SMA-02 05/20/05

Receiver SCR3102 SCHAFFNER 012 05/13/05

Control Box TWR95-4 TRC C9001-2 N/A

Antenna CBL6141A SCHAFFNER 4206 05/26/05

Pre-amplifier TRC-CB-2 TRC CB-002 05/28/05

Coaxial cable

(20 meter)

RG-214/U JYEBAO Cl-002 05/28/05

Coaxial Cable

(50 cm)

BNC31VB-0316 JYEBAO SMA-02 05/28/05

Coaxial Cable

(1.1 meter)

BNC31VB-0318 JYEBAO SMA-02 05/28/05

Coaxial Cable

(1.1 meter)

BNC31VB-0316 JYEBAO SMA-02 05/28/05

Coaxial Cable

(1.1 meter)

BNC31VB-0316 JYEBAO SMA-02 05/28/05

The level of confidence of 95% , the uncertainty of measurement of radiated emission is +2.85dB / -2.77dB .

Test Report ------------------------------------------------------------------------------- 44/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Radiated Test Placement (Front view and Rear view)

Test Report ------------------------------------------------------------------------------- 45/45

Report No.: C51ET050252 (ETSI EN 301 489)

Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Result of Spurious Radiated Emissions

Test Conditions:

Testing room : Temperature : 25 ° C Humidity : 73 % RH

Testing site : Temperature : 25 ° C Humidity : 73 % RH

Radiated Emissions for 30MHz to 1GHz [Horizontal]

Radiated

Emission

Class B

( 10 m )

F

requency

(MHz)

Amplitude

(dB

µ

V)

Ant. H.

(m)

Table

()

Correction

Factors

(dB)

Corrected

Amplitude

(dB

µ

V/m)

Limit

(dB

µ

V/m)

Margin

(dB)

122.8825 26.90 3.57 0 -6.74 20.16 30.00 -9.84

259.9863 35.61 1.38 245 -5.00 30.61 37.00 -6.39

298.4240 33.65 3.06 93 -3.45 30.20 37.00 -6.80

324.9250 36.07 3.15 0 -2.65 33.42 37.00 -3.58

912.8125 23.24 1.95 132 9.85 33.09 37.00 -3.91

Radiated Emissions for 30MHz to 1GHz [Vertical]

Radiated

Emission

Class B

( 10 m )

F

requency

(MHz)

Amplitude

(dB

µ

V)

Ant. H.

(m)

Table

()

Correction

Factors

(dB)

Corrected

Amplitude

(dB

µ

V/m)

Limit

(dB

µ

V/m)

Margin

(dB)

73.9025 32.39 1.00 93 -9.68 22.71 30.00 -7.29

232.8825 29.42 1.00 327 -6.37 23.05 37.00 -13.95

565.8613 19.28 1.00 334 4.45 23.73 37.00 -13.27

649.9663 18.27 2.15 183 4.40 22.67 37.00 -14.33

Note:

1. Margin = Amplitude – limit, if margin is minus means under limit.

2. Corrected Amplitude = Reading Amplitude + Correction Factors

3. Correction factor = Antenna factor + ( Cable loss – Amplitude gain) + Switching box loss

Copy of the R&TTE Declaration of

Conformity (DoC)

Declaration of Conformity

We, the under signed,

Company CAMEO COMMUNICATIONS, INC.

Address, City 4F, No. 42, Min Chuan E. Rd., Sec. 6, Taipei

Country Taiwan, R.O.C.

Phone number 886-2-27908998

Fax number 886-2-27909463

E-mail Jason_Chang@mail.cameo.com.tw

certify and declare under our sole responsibility that the following equipment:

Product Description / Supplementary Info

802.11g Wireless PC Card

Manufacturer CAMEO COMMUNICATIONS, INC.

Brand CAMEO, Level One, LG, Etherwan, Allnet GmbH

Type WLG-1103, WPC-0300, LWS5410N, NWP-0208-G, ALL0282A

is tested to and conforms with the essential radio test suites included in the following standards:

Standard Issue date

ETSI EN 300 328

ETSI EN 301 489-1

ETSI EN 301 489-17

EN 60950-1

V1.4.1 Apr. 2003

V1.4.1 Aug. 2002

V1.2.1 Apr. 2002

2001

and therefore complies with the essential requirements and provisions of the R&TTE directive

1999/5/EC of the European Parliament and of the council of 9March 1999 on radio equipment and

Telecommunications Terminal Equipment and the mutual recognition of their conformity and the

requirements of Annex IV (conformity Assessment procedure referred to in article 10(4)).

The following Notified Bodies have been consulted in the Conformity Assessment procedure:

Notified Body number Name and address

0470 Nemko, PO Box 73, Blindern N-0314 Oslo, Norway

The technical documentation as required by the Conformity Assessment procedure is kept at the

following address:

Company CAMEO COMMUNICATIONS, INC.

Address, City No. 42, Min Chuan East Road, Section 6, Taipei 114,

Country Taiwan

Phone number 886-2-27908998

Fax number 886-2-27909463

E-mail Jason_Chang@mail.cameo.com.tw

Draw up in

TAIWAN, R.O.C.

Date 2005/4/27

CAMEO COMMUNICATIONS, INC.

No. 42, Min Chuan East Road, Section 6,

Taipei 114, Taiwan

Signature & company stamp Jason Chang /

Wireless Comm. R&D Dept. Manager

Product Quality

Assurance Documents

Declaration of Product Quality Assurance

In accordance with the Conformity Assessment procedure referred to in article 10(3) of R&TTE

Directive 1999/5/EC of the European Parliament and the council of 9 march 1999 on the Radio

equipment and Telecommunication Terminal Equipment and their mutual recognition of their conformity

(R&TTE directive) the following manufacture:

Company CAMEO COMMUNICATIONS, INC.

Address, City 6F, NO. 22, Chung Shin Rd., Hsi-Chih,

Country Taipei 221, Taiwan

Phone number 886-2-26499800

Fax number 886-2-26499984

E-mail Jason_Chang@mail.cameo.com.tw

declares under its sole responsibility that it had taken the following measures in order to achieve that

the manufacturing process ensures compliance of the manufactured products with the technical

documentation as established by CAMEO COMMUNICATIONS, INC.. under the requirements of the

R&TTE directive and with the requirements of R&TTE directive that apply to them:

Number Measures taken in order to achieve that the manufacturing process ensures

compliance of the manufactured products

01 Manufacturing of the equipment is subcontracted by CAMEO

COMMUNICATIONS, INC. to CAMEO COMMUNICATIONS, INC. located at 6F,

NO. 22, Chung Shin Rd., Hsi-Chih, Taipei 221, Taiwan. who is ISO 9001 certified

for development, production and distribution of radio products. (See copy of ISO

9001 certification attached)

Draw up in

TAIWAN, R.O.C.

Date 2005/4/27

CAMEO COMMUNICATIONS, INC.

No. 42, Min Chuan East Road, Section 6,

Taipei 114, Taiwan

Signature & company stamp Jason Chang /

Wireless Comm. R&D Dept. Manager