Cat Panasonic Cordless%20Power%20Tools.compressed
2014-09-04
: Pdf 516930-Attachment 516930-Attachment 092281 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 21
| Download | |
| Open PDF In Browser | View PDF |
TM Use 14.4V or 18V power! 1 Professional Power Tool Line-Up CONTENTS PROFESSIONAL POWER TOOLS Product Line-Up 2-3 Tough IP Technology 4-7 Battery Technology 8-9 Impact Driver 12 Impact Wrench 13 14 Multi-Impact & Drill Driver 15 Drill & Driver 16-19 Hammer Drill & Driver 20-21 SDS-Plus Rotary Hammer 22-23 al Du h t i sw e NEW ri Se 24-25 Multi-Purpose Metal Cutter 26-27 Angle Grinder & Flashlight 28 Power Supply & Combo Kits 29-31 NI-MH POWER TOOLS Drill & Driver Combo Kit 33 Battery Chargers 34 Battery Compatibility Table 2 35 Li-ion / Ni-MH Capacity Tables 36-37 Power Tool Accessories Chart 38-39 EY37C1B Impact Wrench Drill & Driver Flashlight Reciprocating Saw EY7450LR2S EY7552X Li-ion Power Tool Line-up Drill & Driver Impact Wrench NEW EY7950LR2S Hammer Drill & Driver NEW EY7549X Multi-Impact & Drill Driver 32-33 33 EY75A2X EY7450LS2S EY45A1LS1S Drill & Driver EY7441LR2S Metal Cutter Kit NEW NEW NEW Drill & Driver Drill & Driver Kits 14.4V/18V/21.6V NEW EY75A1LS2G EY74A1LS2G Reciprocating Saw tage Vol V 18 High Torque Impact Wrench 18 V 10-11 14 .4V / Dual Voltage Technology Panasonic introduces the latest technology in digital cordless tools. EY7950LS2S Hammer Drill & Driver EY4542LR2M NEW Multi Purpose Metal Cutter EY7880LP2S 14 .4V EY7940LR2S Hammer Drill & Driver SDS-Plus Rotary Hammer EY7840LR2S .8V 28 EY7410LA2S Rotary Hammer Drill & Driver Drill & Driver EY4640X Angle Grinder 3.6V 3 Tough Tools for Tough Conditions Conditions Many things can happen at a job site; such as unexpected incidents, water contact, or exposure to dust, which can cause a tool to malfunction. Also, with more electronics in power tools, its important to protect them from dust and moisture. By incorporating the Tough IP technology, it reassures that Panasonic cordless tools perform at their best in most difficult situations. Dust Protection Level 5 Test The IP standard test is administered by the International Electrotechnical Commission (IEC), to test the level of protection that a product offers against water and dust. The products are subjected to a very thorough examination to test their capabilities in the toughest conditions imaginable before they are allowed to carry the IP rating. Tested not in motion in accordance with IP56 of International Standard, IEC 60529. The rating of IP56 qualifies this tool for the minimum impact of water or dust, but not for the assurance of performance in such conditions. See Safety and Operating Instructions for further details for proper operation. 4 Water Protection Level 6 Dust Protection Test The tool is subjected to heavy dust and then checked to ensure it continues to function properly. Results Panasonic cordless tools are designed with protection features and have attained level IP56. These results show Panasonic’s on-going commitment to the industry by providing customers with innovative products that work in the toughest job conditions. International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by IEC standards. Dust Resistance Level indicates the degree of protection provided against the intrusion of solid foreign objects using a scale of six levels. Water Protection Test The tool is subjected to powerful water jets and then checked to ensure it continues to function properly. Level Brief description Water Resistance Level Indicates the degree of protection provided against the intrusion of water associated with harmful effects using a scale of eight levels. Level Brief description 1 Protected against solid foreign objects of 50mm Ø and greater 1 Protected against vertically falling water drops 2 Protected against solid foreign objects of 12.5mm Ø and greater 2 3 Protected against solid foreign objects of 2.5mm Ø and greater Protected against vertically falling water drops when enclosure tilted up to 15° 4 Protected against solid foreign objects of 1.0mm Ø and greater 3 Protected against spraying water 5 Dust protected 4 Protected against splashing water 6 Dust-tight 5 Protected against water jets 6 Protected against powerful water jets 7 Protected against the effects of temporary immersion in water 8 Protected against the effects of continuous immersion in water 5 High power/high speed drilling/cutting Tough. Durable. Innovative. Cordless Tools with high-end features. Panasonic has developed intelligent power tools to increase task efficiency as well as operate in tough conditions of various jobsites. Panasonic continues to evolve its technology and provide tools that meet any type of job requirements. Multi-task with a single tool Drill & Driver mode Task Efficiency Innovation Easy-to-hold, ergonomic design Impact mode • Work Speed • Comfortable • Convenience Tough Environmental Conditions Drill & Driver mode Long-lasting, Brushless Motor No Brushes! Replacement is not necessary. • Dust Resistance • Water Resistance As a result of dust and water resistant technologies, these tools comply with International Protection standards. IP56 Electronic switch Tough Usage Switch An additional rubber cap seals the switch and protects it against dust and water. • High Durability • Long Life • High Capacity The switch only requires the amount of electrical current used for controlling speed and brake. Separate wiring system Electronic Circuit The electronic circuits and battery pack are protected to withstand water and dust. 6 Battery The battery cells are designed to protect against moisture and keep performing at their best. 7 Panasonic’s Lithium Nickel 4.2Ah Battery Pack! Durable, Lightweight and Extended Run Time. Total Performance (Index comparison.14.4V N type battery at 100%) Approx. 27% More working capacity per charge 18V EY9L51B Li-ion S type 18V EY9L51B Li-ion S type 205 14.4V EY9L45B Li-ion S type 170 18V EY9L50B Li-ion R type 167 14.4V EY9L44B Li-ion R type 133 14.4V EY9L41B Li-ion Z type 125 14.4V EY9L40B Li-ion N type 100 18V EY9L50B Li-ion S type Holes in Yellow Pine dia. 11/16" x t=4-3/4" *Drill & Driver 18V EY74A1 The new battery packs offer protection, durability and are long lasting. Monitoring of Individual Battery Cells Each 3.6V segment is monitored by a sensor to ensure optimal discharge control, preventing overcharging and overdischarging. 4.2Ah Li-ion Battery = Longer Battery Capacity Battery Overdischarge Prevention Sensor A sensor works to prevent overdischarging (discharge of the battery until voltage falls below a minimum threshold), a disadvantage inherent to lithium ion cells. Driving 340 pcs 8 (Spax screw dia. 5/16" x 3-5/32") *Drill & Driver 18V EY74A1 Bolting 350 pcs (M12 x 1 t=3/8") *Impact Wrench 18V EY75A2 Cutting yellow pine 80 pcs *Reciprocating Saw 18V EY45A1 Battery Overheat Protection Sensor A temperature sensor cuts off power to the motor before the battery temperature rises to a harmful level and flashes a warning lamp on the tool’s control panel to notify the user. Cell Sensor Battery Cell Case Battery Flashing lamp indicates low battery. Flashing lamp indicates overheating battery. Battery is automatically reactivated when the temperature drops. Cell 9 Dual Voltage Technology 14.4V 18V It’s easier to use, lightweight and compact Increases application speed and working capacity Versatility, High Performance and Extreme Run Time! Dual Voltage Circuit The new series with Dual Voltage Technology is compatible with current 18V and 14.4V Li-ion battery packs. 14.4V 18V 4.2Ah S type EY9L45B The circuit detects battery voltage, controls the proper current and delivers the correct voltage flow to the tool for best performance 4.2Ah S type 3.3Ah R type EY9L51B EY9L44B 1.5Ah E type 3.3Ah R type EY9L42B EY9L50B 3.1Ah Z type EY9L41B The new series with dual voltage line up EY74A1LS2G Drill & Driver 10 EY75A1LS2G Impact Driver EY75A2X Impact Wrench EY45A1LS1G Reciprocating Saw 11 Impact Driver Impact Wrench Brushless Motor with 3-Speed Ranges for Increased Control Brushless Motor with 3-Speed Ranges, 1/2" Square Drive with 1/4" Quick Change Adapter Faster and long lasting Easier to handle in narrow space Easier to handle Faster and long lasting EY75A1LS2G / EY75A1X Cordless Impact Driver Kit Brushless Motor TM Dual Voltage Technology • Dual voltage ready • High capacity 4.2Ah Li-ion battery • Compact size (L x H x W): 5-5/8" x 9-17/32" x 2-13/32" • Light weight (incl. Battery): 3.53 lbs. • High power: 1,370 in. lbs. • Variable speed/reversible • Brushless motor and hybrid switch • 3 Speeds (High/Medium/Low) • 1/4" Hex quick connect chuck • Charging Time (using EY0L82B charger)*: Usable: 55 minutes Full: 70 minutes • Electric brake • LED work light • Belt hook • Kit includes 1 - EY75A1, 2 - (EY9L51B) 4.2Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case Brushless Motor TM Dual Voltage Technology • Dual voltage ready • Compact size (L x H x W): 6-1/8" x 9-17/32" x 2-13/32" • Light weight (incl. Battery): 3.75 lbs. • High power: 1,815 in. lbs. • Variable speed/reversible • Brushless motor and hybrid switch • 3 Speeds (High/Medium/Low) • 1/2" Square chuck • Charging Time (using EY0L82B charger)*: Usable: 55 minutes Full: 70 minutes • Electronic performance monitoring system • Electric brake • LED work light • Belt hook • Accepts Panasonic 18V and 14.4V Li-ion packs Tool Specs Tool Specs High/Hard Mode Max. Torque 1,370 in. lbs.* Speed at No Load Impact/min. Medium Mode Low/Soft Mode High/Hard Mode Medium Mode Low/Soft Mode 1,150 in. lbs.* 230 in. lbs.* Max. Torque 1,810 in. lbs.*1 1,240 in. lbs.*2 440 in. lbs.*3 0 - 2,500 rpm 0 - 1,400 rpm 0 - 1,000 rpm Speed at No Load 0 - 2,300 rpm 0 - 1,400 rpm 0 - 1,000 rpm 0 - 3,000 ipm 0 - 2,800 ipm 0 - 2,000 ipm Impact/min. 0 - 3,500 ipm 0 - 2,800 ipm 0 - 2,000 ipm 1 1 2 *1 M14 High tensile bolt tightening for 3 sec. *2 M10 High tensile bolt tightening for 3 sec. TYPICAL APPLICATION • Air Conditioning Installation • Automotive Repair and Maintenance 12 EY75A2X Cordless Impact Wrench • Assemble and Disassemble Scaffolding • Long Wood Screw/Lag Screw Fastening Standard Accessory 1/4" hex quick change chuck EY9HX111E *1 M16 High tensile bolt tightening for 3 sec. *2 M14 High tensile bolt tightening for 3 sec. *3 M10 High tensile bolt tightening for 3 sec. EY75A1X: Battery pack and battery charger are not included. *Charging times are approximate and may be slightly longer depending on conditions. TYPICAL APPLICATION • Bolt + Nut fastening • Long Wood Screw/Lag Screw Fastening • Assemble and Disassemble Scaffolding EY75A2X: Battery pack and battery charger are not included. *Charging times are approximate and may be slightly longer depending on conditions. 13 High Torque Impact Wrench Multi-Impact & Drill Driver 470 Nm (346 ft. lbs.) High Torque Impact, 1/2" Square Drive, Compact & Light Weight From driving to drilling holes... A single tool can do it all. Drill & Driver Impact Driver Impact Wrench EY7552LS2S / EY7552X Cordless High Torque Impact Wrench Kit TM 18V • Multi-function tool • 1/4" Hex Impact Driver • 1/2" Impact Wrench • 2 Speed Drill Driver • High capacity 14.4V 4.2Ah Li-ion battery (optional) • 1/2" Square drive with ball detent • 1/2" Detachable keyless chuck (EY9X003E (included)) • 1/4" hex quick change adapter (EY9HX111E (included)) • 2 Speed variable speed drill with 21 stage adjustable clutch (Approx.): 6.2 in. lbs. - 38.9 in. lbs. • High power: Impact Mode: 1327 in. lbs. Drill & Driver Mode: 230 in. lbs. • Variable Speed/Reversible: • Impact Mode: 0-2,350 rpm • Drill & Driver Mode: High 180-1,200 rpm Low: 60-380 rpm • Impact/min.: 0-3,200 ipm in Impact Mode • Electric brake • LED work light • Belt hook • Low battery indicator • Compact size (L x H x W): 8-9/32" x 9-3/16" x 2-1/16" (square drive) • Light weight (incl. Battery): 4.07 lbs. (square drive) 4.52 lbs. (with keyless chuck) • Charging Time (using EY0L82B charger): Usable: 50 minutes Full: 60 minutes • High torque output 470 Nm (346 ft. lbs.) • Twin Hammer design for durability, speed & size • Faster working speed than single hammer designs • 1/2" Square drive with friction ring and through hole design • Low vibration and noise level • Variable speed trigger/reversible • Electric brake • Battery level indicator • 4.2Ah High capacity 18V Li-ion battery • Compact size (L x H x W): 8-7/16" x 9-15/16" x 3-1/16" • Light weight (incl. Battery): 5.7 lbs. • Charging Time (using EY0L82B charger): Usable: 55 minutes Full: 70 minutes • Kit includes 1 - EY7552, 2 - (EY9L51B) 4.2Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger Tool Specs Max. Torque 470 Nm (346 ft. lbs.) Speed at No Load 0 - 1,550 rpm Impact/min. 0 - 2,400 ipm TYPICAL APPLICATION • Construction • General Industry • Automotive/Truck Repair and Maintenance • HVAC • Maintenance • Recreational Vehicles EY7552X: Battery pack and battery charger are not included. 14 EY7549X Cordless Multi-Tool Impact & Drill Driver *Charging times are approximate and may be slightly longer depending on conditions. TYPICAL APPLICATION • HVAC • Construction • Maintenance • General Industry • Recreational Vehicles • Heavy Equipment/Off Road • Automotive Repair and Maintenance TM 14.4V EY7549X: Battery pack and battery charger are not included. Standard Accessory 1/2" Detachable keyless chuck EY9X003E Standard Accessory 1/2" Square drive to 1/4" hex quick change adapter EY9HX111E *Charging times are approximate and may be slightly longer depending on conditions. 15 EY74A1LS2G / EY74A1X Drill & Driver TM Cordless 1/2" Drill & Driver Kit High Speed Performance, Compact and Lightweight Increases application speed and working capacity Dual Voltage Technology • Dual voltage – accepts either 14.4V or 18V Panasonic Li-ion batteries • High capacity 4.2Ah Li-ion battery • Compact size (L x H x W): 8" x 9-13/32" x 2-5/16" • Light weight (incl. battery): 4.30 lbs. • Variable speed/reversible: Low: 80-600 rpm High: 220-1,750 rpm • Clutch Torque (Approx.): 4.3-39 in. lbs. (2.0 in. lbs. per stage, total 18 stage) • 1/2" Heavy duty keyless chuck • Charging Time (using EY0L82B charger)*: Usable: 55 minutes Full: 70 minutes • Electric brake • LED work light • Low battery indicator • Kit includes 1 - EY74A1, 2 - (EY9L51B) 4.2Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case • Max. Drill Diameter: in Wood: dia. 1-3/8" in Metal: dia. 1/2" • Max. Screws Driving: Wood screw: dia. 9/32" Self-drilling screw: dia. 1/4" TYPICAL APPLICATION • General Construction • Plumbing • Finishing Carpentry • Electric Installation Work EY74A1X: Battery pack and battery charger are not included. High speed drilling and more working capacity with 18V power! *Comparison of application speed. dia.11/16" x 4-3/4" (wood drilling with high mode) Faster!! NEW EY74A1LR (18V) (Approx. 20% less time) EY7441LR (14.4V) *The reference above shows value based on internal test, and there may be some difference on conditions and so on. Compact, Easy-to-use EY74A1 8" Easy to use, lightweight and compact 16 LED Light EY7450 8-9/16" Belt Hook Ergonomic design reduces fatigue *Charging times are approximate and may be slightly longer depending on conditions. 17 EY7450LS2S EY7450LR2S Cordless 1/2" Drill & Driver Kit TM 18V • High capacity EY7450LS2S 4.2Ah Li-ion battery EY7450LR2S 3.3Ah Li-ion battery • Compact size (L x H x W): 8-9/16" x 9-3/4" x 2-1/2" • Light weight (incl. battery): EY7450LS2S 4.70 lbs. EY7450LR2S 4.70 lbs. • High power: EY7450LS2S 505 in. lbs. EY7450LR2S 505 in. lbs. • Variable speed/reversible: Low: 50-430 rpm High: 160-1,650 rpm • Clutch Torque (Approx.): 8.8-61.0 in. lbs. (3.0 in. lbs. per stage, total 18 stage) • 1/2" Heavy duty keyless chuck • Charging Time (using EY0L82B charger)*: EY7450LS2S Usable: 55 minutes Full: 70 minutes EY7450LR2S Usable: 40 minutes Full: 55 minutes • Electric brake • LED work light • Low battery indicator • EY7450LS2S Kit includes 1 - EY7450, 2 - (EY9L51B) 4.2Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case. EY7450LR2S Kit includes 1 - EY7450, 2 - (EY9L50B) 3.3Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case. • Max. Drill Diameter: in Wood: dia. 1-7/16" in Metal: dia. 1/2" • Max. Screws Driving: Wood screw: dia. 5/16" Self-drilling screw: dia. 1/4" TYPICAL APPLICATION • General Construction • Plumbing • Finishing Carpentry • Electric Installation Work EY7441LR2S Cordless 1/2" Drill & Driver Kit • High capacity 3.3Ah Li-ion battery • Compact size (L x H x W): 7-5/8" x 9-1/8" x 2-3/8" • Light weight (incl. battery): 3.85 lbs. • High power: 370 in. lbs. • Variable speed/reversible: Low: 70-400 rpm High: 200-1,400 rpm • Clutch Torque (Approx.): 4.4-39.0 in. lbs. (2.0 in. lbs. per stage, total 18 stage) • 1/2" Heavy duty keyless chuck • Charging Time (using EY0L82B charger)*: Usable: 40 minutes Full: 55 minutes • Electric brake • LED work light • Low battery indicator • Belt hook • Kit includes 1 - EY7441, 2 - (EY9L44B) 3.3Ah 14.4V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case • Max. Drill Diameter: in Wood: dia. 1-3/8" in Metal: dia. 1/2" • Max. Screws Driving: Machine screw: M5 Wood screw: dia. 1/4" Self-drilling screw: dia. 1/4" TYPICAL APPLICATION • General Construction • Plumbing • Finishing Carpentry • Electric Installation Work 18 TM 14.4V EY7410LA2S / EY7410LA1C Cordless Drill & Driver Kit 3.6V • 1.5Ah Li-ion battery • Compact size (L x H x W): 10-7/8" x 5-9/32" x 1-13/16" in straight format • Light weight (incl. battery): 1.10 lbs. • Powerful: Low: 39.0 in. lbs. High: 13.3 in. lbs. • 2 Speed reversible: Low: 200 rpm High: 600 rpm • Clutch Torque (Approx.): 2.7-25.7 in. lbs. (0.9 in. lbs. per stage, total 21 stage) • 21 Stage clutch with auto shut off • 1/4" Hex quick change chuck • Cap for clutch lock out • Charging Time (using EY0L11B charger)*: Usable: 15 minutes Full: 30 minutes • LED work light • Low battery indicator • Kit includes 1 - EY7410, 2 - (EY9L10B) 1.5Ah 3.6V Li-ion Batteries, 1 - (EY0L11B) Charger, and Case • Max. Drill Diameter: in Metal dia. 3/16" (spc t=1/16") • Max. Screws Driving: Wood screw dia. 5/32” x 1-1/2" TYPICAL APPLICATION • Rack/Cabinet installers • Electricians • Electronics Assembly • Service engineers EY7410LA1C: 1 Battery pack is included. Charger not included. Optional Accessory Clutch lock cover EY9X007E *Charging times are approximate and may be slightly longer depending on conditions. 19 Hammer Drill & Driver High power drilling in masonry, wood, metal. EY7950LS2S EY7950LR2S Cordless Hammer Drill & Driver Kit • High capacity TM 18V 4.2Ah Li-ion battery EY7950LR2S 3.3Ah Li-ion battery • Compact size (L x H x W): 9-1/4" x 9-3/4" x 2-1/2" • Light weight (incl. battery): EY7950LS2S 5.00 lbs. EY7950LR2S 5.00 lbs. • High performance as regular drill: Max. Torque: EY7950LS2S 505 in. lbs. EY7950LR2S 505 in. lbs. • Variable speed control/reversible: Low: 50-430 rpm High: 160-1,650 rpm • Clutch Torque (approx): 8.8-61.0 in. lbs. (3.0 in. lbs. per stage, total 18 stage) (Max. Torque at drilling position–stage 16) • Blows Rate per Minute: Low: 900-7,740 bpm High: 2,880-29,700 bpm • 1/2" Heavy duty keyless chuck • Charging Time (using EY0L82B charger)*: EY7950LS2S Usable: 55 minutes Full: 70 minutes EY7950LR2S Usable: 40 minutes Full: 55 minutes • Electric brake • LED work light • Low battery indicator • EY7950LS2S Kit includes 1 - EY7950, 2 - (EY9L51B) 4.2Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case. EY7950LR2S Kit includes 1 - EY7950, 2 - (EY9L50B) 3.3Ah 18V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case. • Max. Drill Diameter: in Wood: dia. 1-7/16" in Metal: dia. 1/2" in Mortar/Brick: dia. 1/2" • Max. Screws Driving: Wood screw: dia. 5/16" Self-drilling screw: dia. 1/4" EY7950LS2S TYPICAL APPLICATION Electricians General construction Interior installation Masonry drilling Masonry/wood fastening Wood/metal drilling Heating, water & sanitation technicians *Charging times are approximate and may be slightly longer depending on conditions. EY7940LR2S Cordless Hammer Drill & Driver Kit TM 14.4V • High capacity 3.3Ah Li-ion battery • Compact size (L x H x W): 7-7/8" x 9-1/8" x 2-3/8" • Light weight (incl. battery): 3.96 lbs. • High performance as regular drill: Max. Torque: 370 in. lbs. • Variable speed control/reversible: Low: 70-400 rpm High: 200-1,400 rpm • Clutch Torque (approx.): 8.8-39 in. lbs. (1.8 in. lbs. per stage, total 18 stage) (Max. Torque at drilling position–stage 16) • High speed masonry drilling: Max.1,400 rpm / 25,200 bpm • Blows Rate per Minute: Low: 1,260-7,200 bpm High: 3,600-25,200 bpm • 1/2" Heavy duty keyless chuck • Charging Time (using EY0L82B charger)*: Usable: 40 minutes Full: 55 minutes • Electric brake • LED work light • Low battery indicator • Kit includes 1 - EY7940, 2 - (EY9L44B) 3.3Ah 14.4V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case • Max. Drill Diameter: in Metal dia. 1/2" in Wood dia. 1-3/8" in Mortar/Brick dia. 1/2" • Max. Screws Driving: Machine screw: M5 Wood screw: dia. 1/4" Self-drilling screw: dia. 1/4" TYPICAL APPLICATION • Electricians • General construction • Interior installation 20 • Masonry drilling • Masonry/wood fastening • Wood/metal drilling • Heating, water & sanitation technicians *Charging times are approximate and may be slightly longer depending on conditions. 21 EY7880LP2S Cordless SDS-Plus Rotary Hammer Kit SDS-Plus Rotary Hammer Powerful, light and tough for continuous use! TM 28.8V • High capacity 3.0Ah Li-ion battery • Compact size (L x H x W): 12-9/16" x 8" x 3-1/16" • Light weight (incl. battery): 8.49 lbs. • Two speed hammering selection: High: 0 - 4,500 bpm Low: 0 - 2,800 bpm • Two speed drilling selection variable speed/reversible: High: 0 - 920 rpm Low: 0 - 500 rpm • Dual function: Rotary hammer or drill • Slow start two-finger switch for accurate drilling with a clean finish • Ergonomic soft rubber grip for stress reduction • Dust collection cup as standard equipment • 3/4" SDS-Plus bit system • Hammering force: 23.6 kN • 360° auxiliary side handle with built-in depth gauge • Charging Time (using EY0L82B charger)*: Usable: 60 minutes Full: 80 minutes • LED work light • Low battery indicator • Kit includes 1 - EY7880, 2 - (EY9L82B) 3.0Ah 28.8V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case TYPICAL APPLICATION • Concrete drilling • Masonry drilling Excellent cooling/dust-proof design supports continuous use Magnesium metal gear case Cooling and dust proof performance have been improved and this serial drilling display of 180 holes (dia. 1/2" x 1-9/16") demonstrates the toughness of the hammer to handle rigorous continuous work conditions (equivalent to 3 battery packs). Rigorous continuous use is made possible by the flow of air through a space between the gear case and the main unit housing. This acts to cool the gear case, containing the hammer and gears, which can become hot during extended use. Large cooling fan drivers exhaust system helps prevent dust build-up. The gear case is made from magnesium which is light and excellent for dispersing heat. The hammer and gears are covered to prevent fine particles of dust from entering the tool and grease from leaking. Large cooling fan Dust-proof switch Built-in motor Easy to hold, resists fatigue! Two-Speed Selection Emission Air intake ø5- ø20 ard 23.6 kN [2,400 kgf] Grip width of our EY6813 Optional Accessories SDS-Plus Chiseling Attachment For light chiseling EY9HX402E HammerH 22 The dust-proof switch prevents fine particles of dust from entering the tool and causing problems with the motor. Carefully designed for ease of use. Supported functions. Two-finger switch Serial drilling of 180 holes (1/2" in diameter)! ø3.2- ø5 Hammer SDS-Plus Drill Chuck For 1/16" dia. – 1/2" dia. bit Soft 12.7 kN [1,300 kgf] EY9HX400E Standard Accessory Dust collection cup White LED light For light chiseling *Charging times are approximate and may be slightly longer depending on conditions. 23 Reciprocating Saw EY45A1LS1G/EY45A1X Cordless Reciprocating Saw Kit TM Dual Voltage Technology Long Lasting for continuous use Powerful cutting through thick metal pipe • Dual voltage – accepts either 14.4V or 18V Panasonic Li-ion batteries • High capacity 4.2Ah Li-ion battery • Powerful Cutting (stroke length 1-1/8mm, 0-2,800spm) • Compact Size (L x H x W): 18-1/8" x 8-1/4" x 3-7/16" • Light weight: 7.50 lbs. • Max. Cutting Size in metal pipe dia. 5-1/8", in wood 9-1/4" thickness • Easy blade replacement • Safety switch lock lever • Low battery indicator • Charging Time (using EY0L82B charger)*: Usable: 55 minutes Full: 70 minutes • Kit includes 1 - EY45A1, 1 - (EY9L51B) 4.2Ah 18V Li-ion Battery, 1 - (EY0L82B) Charger, and Case TYPICAL APPLICATION • Carpentry • Plumbing • Electrician EY45A1X: Battery pack and battery charger are not included. • Installation • Demolition Fast cutting through thin metal pipe Cutting Demolition Long Lasting Long strong length and high stroke speed enables cutting through thick materials. High voltage reciprocating saw offers powerful cutting performance. High battery capacity enables tool to last longer. Replacement Blade Anti vibration Spring inside tool absorbs shock for less fatigue Metal Blade Standard • Bi-metal blade • 14 teeth per inch • Blade length: 5-7/8" Blade Replacement Blade replacement made easy by using the blade clamping system. Blade is easily secured by inserting and pushing into tool. Blade can be easily removed by turning the holder collar. 24 *Not available as an accessory • Blade length for cutting: 5-1/8" • Blade width: 1/16" • Cutting range: ø2-3/4" Wood Blade Standard • carbon tool steels • Blade length for cutting: 8-11/16" • 5 teeth per inch • Blade width: 1/16" • Blade length: 9-7/16" • Cutting range: ø5-7/8" *Charging times are approximate and may be slightly longer depending on conditions. 25 Multi-Purpose Metal Cutter Made for cutting various materials EY4542LR2M Cordless Multi Purpose Metal Cutter Kit TM 14.4V • High capacity 3.3Ah Li-ion battery • Compact size (L x H x W): 13-1/4" x 9" x 6-5/16" • Light weight (incl. battery): 5.84 lbs. • Rotating Speed: 3,600 rpm • Blade Size: Outer diameter 5-3/8" Arbor size 13/16" • Cutting Depth: Max. 1-13/16" • Electric brake • Cutting edge is easily seen through transparent window • In-line ergonomic design for comfortable cutting • Safety switch lock lever • Shaft lock button for easy blade replacement • Charging Time (using EY0L82B charger)*: Usable: 40 minutes Full: 55 minutes • LED work light • Low battery indicator • Kit includes 1 - EY4542, 2 - (EY9L44B) 3.3Ah 14.4V Li-ion Batteries, 1 - (EY0L82B) Charger, and Case TYPICAL APPLICATION • Metal construction • Plumbing • General construction • Electric installation work Metal Cutting Blade Standard EY9PM13C • C-6 tungsten carbide-tipped blade for metal cutting • 30 teeth • Kerf (in.): 1/16" (.055) Wood Cutting Blade Optional EY9PW13A • C-6 tungsten carbide-tipped blade for wood cutting • 30 teeth • Kerf (in.): 3/64" (.047) 3-way Dust Control 26 1 Use with vacuum cleaner to collect dust 2 Collects dust in the dust case Cutting depth adjustment Cutting edge is easily seen through window 3 Eject dust to the rear of the machine *Charging times are approximate and may be slightly longer depending on conditions. 27 EY4640X Cordless Angle Grinder TM 14.4V • Compact size (L x H x W): 14-3/8" x 4-1/8" x 2-15/16" • Light weight (incl. battery): 4.85 lbs. • Speed at No Load: 9,500 rpm • Wheel diameter: 4-1/2" • Slim grip • On lock warning lamp function • Low battery indicator • Replaceable carbon brushes • Charging Time (using EY0L82B charger)*: Usable: 40 minutes Full: 55 minutes • Electronic Performance Monitoring System • Accepts Panasonic 14.4V Li-ion battery packs. *Charging time, weight and size: case of using the battery pack (EY9L44B) TYPICAL APPLICATION • Metal construction • Plumbing • General construction • Electric installation work EY4640X: Battery, battery charger and grinding wheel are not included. *Charging times are approximate and may be slightly longer depending on conditions. Reinforcement bar cutting Metal Cutting Metal Grinding Slim grip design Slim grip is designed so that you can hold it securely with five fingers, reducing fatigue and making the grinder easy to use both above your head and facing to the side. EY37C1B Cordless Flashlight Indicator lamp for on lock warning lamp function The grinder will not start when the switch is at the ON position, or even when the battery pack is inserted. The warning lamp will flash to indicate that the on lock start prevention has started. 28 14.4V • 2 - EY9L45B: 14.4V 4.2Ah Li-ion battery pack • 1 - EY0L82B: Charger 14.4V / 18V / 21.6V • Triple voltage – accepts either 14.4V, 18V or 21.6V Panasonic Li-ion batteries • Brightness of approx. 4,000 Lux • Adjustable head angle (Four steps) • Low battery indicator • Bulb: Xenon 0.55A • Size (L x H x W) (excluding battery): 10-63/64" x 4-7/8" x 3-35/64" • Weight (excluding battery): 0.75 lbs. • Shoulder strap • Accepts Panasonic 14.4V, 18V, 21.6V Li-ion battery packs. Acceptable Battery Packs and Hours of Use • With 21.6V Li-ion battery pack EY9L61B: Approx. 6 hours 20 minutes • With 18V Li-ion battery pack EY9L51B: Approx. 6 hours 15 minutes • With 18V Li-ion battery pack EY9L50B: Approx. 5 hours 30 minutes • With 14.4V Li-ion battery pack EY9L45B: Approx. 5 hours 10 minutes • With 14.4V Li-ion battery pack EY9L44B: Approx. 4 hours 35 minutes • With 14.4V Li-ion battery pack EY9L41B: Approx. 4 hours 20 minutes • With 14.4V Li-ion battery pack EY9L42B: Approx. 2 hours EYC941B 14.4V Power Supply Kit EYC950B 18V Power Supply Kit 18V • 2 - EY9L51B: 18V 4.2Ah Li-ion battery pack • 1 - EY0L82B: Charger EY37C1B: Battery pack and battery charger are not included. 29 EYC144V33 3.3Ah Lithium Combo Kit Dual Voltage Technology EYC18DV42 4.2Ah Lithium Combo Kit • 1 - EY7441X (Body): 14.4V Drill & Driver • 1 - EY75A1X (Body): Dual Voltage Impact Driver • 2 - EY9L44B: 3.3Ah 14.4V Li-ion Battery Packs • 1 - EY0L82B: Charger • 1 - EY74A1X(Body): Dual Voltage Drill & Driver • 1 - EY75A1X (Body): Dual Voltage Impact Driver • 2 - EY9L51B: 4.2Ah 18V Li-ion Battery Packs • 1 - EY0L82B: Charger EYC144DV42 4.2Ah Lithium Combo Kit EYC194LR 3.3Ah Lithium Combo Kit • 1 - EY74A1X(Body): Dual Voltage Drill & Driver • 1 - EY75A1X (Body): Dual Voltage Impact Driver • 2 - EY9L45B: 4.2Ah 14.4V Li-ion Battery Packs • 1 - EY0L82B: Charger 30 Dual Voltage Technology • 1 - EY7441 (Body): 14.4V Drill & Driver • 1 - EY4542 (Body): 14.4V Multi Purpose Metal Cutter • 2 - EY9L44B: 14.4V 3.3Ah Li-ion battery pack Dual Voltage Technology 14.4V • 1 - EY0L82B: Charger • 1 - Panasonic Tool Bag • Standard/Optional Accessories: See page 41 31 EY6220NQ Cordless Drill & Driver Kit Ni-MH Series 2.4V • Compact size (L x H x W): 9-3/8" x 5" x 1-7/16" in straight format • Light weight (incl. battery): 0.90 lbs. • Max. Torque: Low: 26 in. lbs. High: 13 in. lbs. • Speed at No Load: Low: 200 rpm High: 400 rpm • Clutch Torque (approx.): 3.5, 6.3, 9.1, 11.9, 14.7, 17.5 in. lbs. (multi-stage) (Max. Torque at 6 position) • Easily converts from straight to pistol form • 2-speed gear box • 1/4" hex drive • Multi-stage clutch plus drill • Reversible • Gear lock mechanism for manual tightening • Charging Time (using EY0L11B charger)*: 45 minutes • Kit includes 1 - EY6220, 1 - (EY9221B) 2.8Ah 2.4V Ni-MH Battery, and 1 - (EY0L11B) Charger EY6432NQKW Cordless 1/2" Drill & Driver Kit • 2.8Ah Ni-MH battery • Compact size (L x H x W): 8-3/16" x 9" x 2-9/32" • Light weight (incl. battery): 4.50 lbs. • High power: 370 in. lbs. • Variable speed control/reversible: Low: 65 - 450 rpm High: 200 -1,450 rpm • Clutch Torque (approx.): 9-61 in. lbs. (3.0 in. lbs. per stage, total 18 stage) (Max. Torque at drilling position–stage 19) • 1/2" heavy-duty keyless chuck • 2-speed gear box • Spindle Thread: 3/8" - 24 • Charging Time (using EY0110B charger)*: 45 minutes • Electric brake • New ergonomic design • Kit includes 1 - EY6432, 2 - (EY9230B) 2.8Ah 15.6V Ni-MH Batteries, 1 - (EY0110B) Charger, and Case 15.6V EY6409NQKW Cordless 1/2" Drill & Driver Kit • 2.8Ah Ni-MH battery • Compact size (L x H x W): 8-3/16" x 8-31/32" x 2-9/32" • Light weight (incl. battery): 4.20 lbs. • High power: 292 in. lbs. • Variable speed control/reversible: Low: 50-400 rpm High: 180-1,300 rpm • Clutch Torque (approx.): 9-50 in. lbs. (2.4 in. lbs. per stage, total 18 stage) (Max. Torque at drilling position–stage 19) • 1/2" heavy-duty keyless chuck • 2-speed gear box • Spindle Thread: 3/8" - 24 • Charging Time (using EY0110B charger)*: 45 minutes • Electric brake • New ergonomic design • Kit includes 1 - EY6409, 2 - (EY9200B) 2.8Ah 12V Ni-MH Batteries, 1 - (EY0110B) Charger, and Case 32 12V EY6220N: 1 Battery pack is included. Charger not included. EY3530NQMKW Cordless Metal Cutter Kit • 2.8Ah Ni-MH battery • Compact size (L x H x W): 13-25/32" x 7-1/8" x 7-13/16" • Light weight (incl. battery): 6.70 lbs. • Rotating Speed: 3,100 rpm • Blade Size: Outer diameter 5-3/8" Arbor size 13/16" • Cutting Depth: Min. 1/8" Max. 1-13/16" • Electric brake • Cutting edge is easily seen through transparent window • In-line ergonomic design for comfortable cutting • Safety switch lock lever • Spindle lock button for easy blade replacement • Charging Time (using EY0110B charger)*: 45 minutes • Kit includes 1 - EY3530, 2 - (EY9230B) 2.8Ah 15.6V Ni-MH Batteries, 1 - (EY0110B) Charger, and Case TYPICAL APPLICATION • General construction • Finishing carpentry • Electric installation work • Plumbing TYPICAL APPLICATION • Appliance Repair • Production line, assembly work • Circuit board assembly (of small equipment) 15.6V TYPICAL APPLICATION • General construction • Electric installation work • Metal construction • Plumbing EYC136NQKW Metal Combo Kit EY9PM13C Standard • C-6 tungsten carbide-tipped blade for metal cutting • 30 teeth • Kerf (in.): 1/16" (.055) Replacement Blades Blade size: dia. 5-5/16" 15.6V • 1 - EY3530 (Body): 15.6V Metal Cutter + Standard metal cutter blade • 1 - EY6432 (Body): 15.6V Drill & Driver • 1 - EY0110: Charger for Ni-MH battery pack • 2 - EY9230: 2.8Ah Ni-MH battery pack • 1 - Carrying Case TYPICAL APPLICATION • General construction • Finishing carpentry • Electric installation work • Plumbing *Charging times are approximate and may be slightly longer depending on conditions. 33 EYOL82B Charger for Li-ion Batteries Battery Pack / Battery Charger - Compatibility Chart • Accepts Panasonic’s 10.8V-28.8V Battery Packs (See below for details) • Equipped with a lamp system that indicates the status of the 6 charging functions at a glance Voltage Model Charging Time Battery 15 30 35 40 50 55 60 Charger 65 70 75 80 85 TYPE OF BATTERY Li-ion LS TYPE LR TYPE LZ TYPE 28.8V LE TYPE EY9L82B 21.6V 28.8V EY7880 *2 EY9L62B 18V EY9L51B EY9L50B 14.4V EY9L45B EY9L44B Charging Time LP TYPE EY9L81B EY9L51B: 55 min.* 7O min. 4O min.* 55 min. EY9L45B: 55 min.* 7O min. EY9L82B EY9L41B EY9L42B EY9L81B: 65 min.* 75 min. EY9L61B: 50 min.* 60 min. EY9L41B: 35 min.* 50 min. EY9L62B: 65min.* 85min. EY9L42B: 30min.* 35min. 60 min.* 80 min. EY7460 EY7960 21.6V EY9L62B *Usable Charge (80%) EYOL11B Charger for Li-ion Batteries & Ni-MH Batteries *2 *2 EY7450 EY7950 EY7552 18V EY9L51B EY0L82B • Accepts Panasonic’s 2.4V-3.6V Battery Packs (See below for details) *2 EY37C1B TYPE OF BATTERY 3.6V Li-ion Ni-MH LA TYPE N TYPE EY9L10B 2.4V Charging Time EY9L50B EY74A1 EY45A1 EY75A4 EY75A5 EY9221B 15 min.* • 30 min. 45 min. *2 EY7441 EY7940 EY7840 EY4542 EY4640 EY7549 14.4V EY9L45B *2 *2 EY9L44B EY0110B Charger for Ni-MH Batteries & Ni-Cd Batteries 3.6V • Accepts Panasonic’s 7.2V-24V Battery Packs (See below for details) • Equipped with a lamp system that indicates the status of the 5 charging functions at a glance 15.6V EY7410 EY7411 G TYPE EY9230B 24V 18V EY9210B V TYPE F TYPE C TYPE D TYPE EY9117B EY9116B EY9231B EY9230B EY9136B 12V EY9201B EY9200B EY9106B 9.6V 7.2V 34 E TYPE 12V EY6409 EY9251B 15.6V Charging Time EY0110B Ni-Cd N TYPE EY0L11B EY6432 EY3530 TYPE OF BATTERY Ni-MH *2 EY9L10B EY9200B EY9101B EY9006B EY9001B EY9182B/9180B EY9086B EY9080B EY9166B 65 min. 55 min. 90 min. 45 min. 60 min. 2.4V EY9066B 30 min. 25 min. 20 min. EY6220 *Charging times are approximate and may be slightly longer depending on conditions. EY0L11B EY9221B 20 min. *1 Available X type (bare tool) *2 Usable Charge (80%) 35 Hammer Drill & Driver Li-ion Capacity Table Voltage 18V Model No. Battery Type High Torque Impact Wrench Impact Driver Voltage 18V Model No. Voltage EY75A4X Battery Type EY9L51B (LS) Wood Screws in Yellow Pine dia. 3/16" x 2-15/16" 610 pcs Self-Drilling Screws in SPC dia. 5/32" x 1/2” t=1/16" 990 pcs Standard Tensil Bolt M16 x 1" t=3/8" 18V Model No. EY7552LS2S Battery Type EY9L51B (LS) Fastening Fastening M12 x 1" t=3/8" 2,700 pcs High Tensil Bolt M12 x 1" t=3/8" 340 pcs 18V Battery Type Fastening Bolting Wood Screws in Yellow Pine dia. 3/16" x 2-15/16" 550 pcs Wood Screws in Yellow Pine dia. 3/16" x 4-3/4" 120 pcs 950 pcs 190 pcs 150 pcs – – – – 590 pcs 500 pcs 75 pcs 60 pcs – M16 x 25mm, t=10mm 2 sec. *with extension 180 pcs Holes in Plaster Board + PlyWood [Low Mode] Plaster Board 1/2"+PlyWood 15/32" dia. 4-29/32" x 15/16" 30 pcs 25 pcs – M12 x 25mm, t=10mm 1 sec. 640 pcs Holes in SPC [High Mode] dia. 1/2" t=1/16" 300 pcs 240 pcs – M24 x 25mm, t=10mm 3 sec. 220 pcs Holes in SPC (Hole saw) [High Mode] dia. 13/16" x t=1/16" 45 pcs 35 pcs 19 pcs M20 x 25mm, t=10mm 2.5 sec. 250 pcs M16 x 25mm, t=10mm 2 sec. 300 pcs 14.4V EY7549X EY9L45B (LS) Holes in SPC dia. 13/16", t=1/16" 19 pcs Holes in SPC dia. 1-5/16", t=1/16" 16 pcs dia. 5/32" x 1/2" t=1/16" Holes in Yellow Pine dia. 11/16", t=4-3/4" 90 pcs M16 x 1" t=3/8" 1,000 pcs Holes in Yellow Pine dia. 1-3/16", t=1-9/16" 120 pcs Standard Tensil Bolt M14 x 1" t=3/8" 1,090 pcs Coach Screws in Yellow Pine dia. 11/32" x 1-31/32" 55 pcs High Tensil Bolt M12 x 1" t=3/8" 350 pcs Self Drilling Screws in SPC dia. 5/32" x 1/2", t=3/32" 450 pcs M12 x 1", t=3/8" 200 pcs Drill & Driver Drilling 18V 14.4V Drilling + Fastening Drilling Voltage Battery Type EY9L51B (LS) EY9L50B (LR) EY9L51B (LS) EY9L44B (LR) Model No. – – – – – – 1,300 pcs 930 pcs Wood Screws in Yellow Pine [Low Mode] dia. 5/16" x 3-5/32" – – 340 pcs – Self-drilling Screws in SPC [High Mode] dia. 1/8" x 1/2” t=1/16" – – – – Self-drilling Screws in SPC [High Mode] dia. 5/32" x 1/2" t=1/16" 640 pcs 500 pcs 1,050 pcs 590 pcs Holes in Plaster Board + PlyWood (Wooding Core) [High Mode] Plaster Board 1/2" + PlyWood 15/32" dia. 2-11/16" t=15/16" 75 pcs 60 pcs 80 pcs – Holes in SPC [High Mode] dia. 1/2" t=1/16" 300 pcs 240 pcs – – Holes in SPC (Hole saw) [High Mode] dia. 13/16" x t=1/16" 45 pcs 35 pcs 40 pcs 19 pcs Holes in SPC (Hole saw) [Low Mode] dia. 1-5/16" t=1/16" 45 pcs 35 pcs 60 pcs 16 pcs Holes in Yellow Pine [High Mode] dia. 11/16" x t=4-3/4" 130 pcs 100 pcs 120 pcs 75 pcs Holes in Yellow Pine [Low Mode] dia. 1-3/16" t=1-9/16" – – 220 pcs 120 pcs 180 pcs 140 pcs 85 pcs 140 pcs 110 pcs – Holes in masonry [High Mode] dia. 3/16" x 1-9/16" depth 150 pcs 120 pcs – Holes in Yellow Pine [High Mode] dia. 11/16" t=4-3/4" 130 pcs 100 pcs 75 pcs Model No. Battery Type 36 Wood Screws dia. 1/8" x 1/2" Screws in M5 x 5/16" Holes in SPC dia. 1/16", *t=1/16" 3.6V 3.6V EY7410LA2S EY7411LA1S EY9L10B (LA) EY9L10B (LA) 600 pcs 600 pcs 1,000 pcs 1,000 pcs 85 pcs 85 pcs SDS-Plus Rotary Hammer 18V Holes in Concrete and Screws Fastened Plastic Anchor Fastening Application Holes in Concrete and Screws Fastened Holes in Concrete dia. 1/8" x 1-3/16" Yellow Pine 28.8V Model No. EY9L51B (LS) Concrete Screw EY7880LP2S Battery Type 120 pcs/charge dia. 1/4" x 1-3/16" 100 pcs/charge dia. 1/4" x 1-3/16" Concrete* 100 pcs/charge dia. 3/16" x 1" dia. 1/8" x 1-3/16" 140 holes/charge dia. 1/4" x 1-3/16" 110 holes/charge dia. 3/8" x 1-9/16" 50 holes/charge dia. 1/2" x 1-9/16" 30 holes/charge EY9L82B (LZ) dia. 1/4" x 1-3/16" 150 holes /charge dia. 5/16" x 3-15/16" 30 holes /charge dia. 1/2" x 1-9/16" 70 holes /charge dia. 9/16" x 3-17/32" 20 holes /charge dia. 25/32" x 1-9/16" 30 holes /charge Multi-Purpose Metal Cutter 18V Battery Type Steel Pipe for Ordinary Piping Voltage EY75A4X Voltage EY45A1LS1G Model No. 14.4V EY4542LR2M EY9L51B (LS) Battery Type outer diameter 1-11/32" (t=1/8") 45 pcs/charge Conduit Pipe ø1" t=1/16" 170 pcs/charge outer diameter 1-29/32" (t=1/8") 30 pcs/charge SPC 17-11/16" t=1/16" 14 pcs/charge outer diameter 3-1/16" (t=5/32") 10 pcs/charge Plywood 35-7/16" t=1/2" 55 pcs/charge 2 x 4 (1-1/16" x 3-1/16") 80 pcs/charge PVC Pipe dia. 1-1/2" t=1/8" 120 pcs/charge 2 x 10 (1-1/16" x 9-1/32") 50 pcs/charge EY9L44B (LR) Angle Grinder* Voltage 14.4V Model No. EY4640X Reinforcing Bar dia. 3/8" 30 pcs/charge *Capacity if using EY9L44B battery pack Ni-MH Capacity Table Metal Cutter Voltage Voltage 45 pcs Reciprocating Saw EY7441LR2S dia. 5/32" x 1" dia. 1-5/16" t=1/16" Battery Type EY74A1LS2G dia. 3/16" x 2-15/16" 16 pcs dia. 1/4" x 1-3/16" depth dia. 3/8" x 1-3/16" depth Model No. EY7450LR2S Wood Screws in Yellow Pine [High Mode] Holes in SPC (Hole saw) [Low Mode] Voltage EY7450LS2S Wood Screws in Yellow Pine [High Mode] 35 pcs Holes in mortar [High Mode] Holes in mortar [High Mode] Rotary Hammer Drill & Driver Model No. Drilling dia. 5/16" x 3-5/32" dia. 1/8" x 1/2" t=1/16" 640 pcs High Tensile Bolt Fastening Wood Screws in Yellow Pine [Low Mode] Self-drilling Screws in SPC [High Mode] dia. 5/32" x 1/2" t=1/16" Standard Tensil Bolt Voltage 240 pcs Plaster Board 1/2"+ PlyWood 15/32" dia. 2-11/16" t=15/16" Self-Drilling Screws in SPC Impact Mode 300 pcs Self-drilling Screws in SPC [High Mode] Battery Type Drill Driver Mode dia. 1/4" x 3-5/32" Holes in Plaster Board + PlyWood (Wooding Core) [High Mode] Model No. EY9L51B (LS) – – Wood Screws in Yellow Pine [High Mode] 300 pcs Voltage EY75A5X EY9L44B (LR) – 210 pcs Multi-Impact & Drill Driver Model No. EY9L50B (LR) – dia. 3/16" x 2-15/16" M16 x 25mm, t=10mm 2 sec. high tensile bolt Voltage EY9L51B (LS) Wood Screws in Yellow Pine [High Mode] dia. 8mm x 80mm Bolting Impact Wrench EY7940LR2S standard tensile bolt 1,150 pcs Standard Tensil Bolt EY7950LR2S SPAX screws in yellow pine Fastening Bolting 14.4V EY7950LS2S Model No. dia. 5/32" x 1" Wood Screws in Yellow Pine 15.6V 12V 2.4V EY6432NQKW EY6409NQKW EY6220NQ — 525 pcs — dia. 1/4" x 2-1/2" 480 pcs — — dia. 1/8" x 25/32" — — 280 pcs — 730 pcs — 120 pcs — — Self-Drilling Screws in SPC dia. 1/8" x 1/2", *t=1/16" Holes in Yellow Pine dia. 1-7/16", *t=1-1/2" Voltage 15.6V Model No. Hanger Rail Conduit Pipe EY3530NQMKW W: 1-5/8" H: 1-5/8" t=1/8" Metal EY9PM13C W: 1-5/8" H: 1-3/16" t=1/16" Metal EY9PM13C 75 pcs/charge Outer / 1" EMT dia. 1-5/32" Metal EY9PM13C 105 pcs/charge * The above table shows average values. There may be some difference depending on the battery condition, the sharpness of the drill bit, the material hardness, etc. * t=thickness of material *At concrete strength of medium hardness. 35 pcs/charge 37 Standard / Optional Accessory Chart STANDARD 38 28.8V Battery Pack (3.0Ah Li-ion Battery Type Z) EY9L82B 21.6V Battery Pack (4.2Ah Li-ion Battery Type Z) EY9L62B 18V Battery Pack (3.3Ah Li-ion Battery Type R) EY9L50B 18V Battery Pack (4.2Ah Li-ion Battery Type S) EY9L51B 15.6V Battery Pack (2.8Ah Ni-MH Battery Type N) EY9230B 14.4V Battery Pack (3.3Ah Li-ion Battery Type R) EY9L44B 14.4V Battery Pack (4.2Ah Li-ion Battery Type S) EY9L45B 12V Battery Pack (2.8Ah Ni-MH Battery Type N) EY9200B 3.6V Battery Pack (1.2Ah Li-ion Battery Type L) EY9L10B 2.4V Battery Pack (2.8Ah Ni-MH Battery Type N) EY9221B Power Supply Kit EYC941B Power Supply Kit EYC950B Charger for Li-ion EY0L82B Charger for Ni-MH & Ni-Cd Battery (7.2-24V) EY0110B Charger for Li-ion, Ni-MH & Ni-Cd Battery EY0L11B Attachable 1/2" to 1/4" Quick Change Adapter EY9HX111E Attachable 1/2" Keyless Drill Chuck for EY7549 EY9X003E 1/2" Keyless Chuck for 18V and 21.6V Drills EY9HX410E 1/2" Keyless Chuck for EY7441 and EY7940 EY9HX411E 1/2" Keyless Drill Chuck for EY7950 EY9HX412E Carbide-Tipped Blade for Metal EY9PM13C Carbide-Tipped Blade for Wood EY9PW13A Rip Fence EY3500B7727 Dust collection cup EY9X004E Clutch Lock Cover EY9X007E EY6220N 2.4V EY6220NQ EY6409NQKW 12V EYC136NQKW EY3530NQMKW EY6432NQKW 15.6V EY7410LA1C EY7410LA2S EYC194LR 3.6V EY4542LR2M EY7840LR2S EY7549X EY7940LR2S EY7441LR2S EY7950LR2S 14.4V EY7950LS2S EY7552X 18V EY7450LR2S 28.8V EY7450LS2S 14.4V/18V/21.6V EY7880LP2S EY45A1X EY45A1LS1G EY75A2X EY75A1LS2G Model No. EY74A1X 14.4V/18V EY74A1LS2G Voltage EY37C1 OPTIONAL 39 Panasonic Eco Solutions North America Power Tool Division 2 Riverfront Plaza, 5th Floor Newark, NJ 07102 For more information, visit our website at us.panasonic.com/cordlesstools or call 1-800-338-0552 Design and specifications are subject to change without notice. Panasonic Canada Inc. 5770 Ambler Drive Mississauga, ON L4W 2T3 Phone: 1-800-669-5165 Fax: 905-238-2414 www.panasonic.ca
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 21 PDF Version : 1.4 Title : Cat-Panasonic-Cordless%20Power%20Tools.compressed Author : Reanie Meyers Producer : Mac OS X 10.8.5 Quartz PDFContext Creator : Preview Create Date : 2014:06:04 21:27:28Z Modify Date : 2014:06:04 21:27:28ZEXIF Metadata provided by EXIF.tools