E 561099 Zunidata Power Cord VDE Certificate
2016-08-23
: Pdf 561099 Zunidata Power Cord Vde Certificate 561099_Zunidata_power_cord_VDE_certificate CertsReports 561099 ProductFiles
Open the PDF directly: View PDF 
.
Page Count: 80
| Download | |
| Open PDF In Browser | View PDF |
VDE Prüf- und Zertifizierungsinstitut
Zeichengenehmigung
Ausweis-Nr. /
Certificate No.
Blatt /
page
40013649
2
Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder
I-Sheng Electric Wire & Cable Co., Ltd., No. 52 Tin Hwu Road,
TAOYUAN HSIEN, TAIWAN
Ta Hua Village, 33334 GWAI SAN,
Aktenzeichen / File ref.
letzte Änderung / updated Datum / Date
1276300-1560-0006 / 169788 / FG45 / SHA
2012-10-22
2005-04-12
Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zeichengenehmigungsausweises Nr. 40013649
This supplement is only valid in conjunction with page 1 of the Certificate No. 40013649.
Stecker ohne Schutzkontakt, nicht wiederanschließbar, umspritzt
Plug, without earthing contact, non-rewirable, moulded
Typ(en) / Type(s):
SP-021A
Bemessungsspannung
Rated voltage
AC 250 V
Bemessungsstrom
Rated current
2,5 A
Polzahl
Number of poles
2-polig ohne Schutzkontakt
2-pole without earthing contact
Bauart
Kind of construction
Normblatt 1
standard sheet 1
Schutzart
Degree of protection
IP20
Produktinformation
Product information
siehe Anlage Nr. 100A +101A + 102A + 103A
see Appendix No. 100A +101A + 102A + 103A
Kennzeichnung der
Fertigungsstätte(n)
Marking of
manufacturingplace(s)
30005950:
30006550:
30006554:
30019097:
Anmerkung
Remark
Die Stecker entsprechen zusätzlich IEC 60884-1(ed.3)
The plugs are additional correponding with IEC 60884-1(ed.3)
ohne / without
"C"
"K"
"V"
_____________________________________________________________________
VDE Prüf- und Zertifizierungsinstitut GmbH
VDE Testing and Certification Institute
Fachgebiet FG45
Section FG45
VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute
_____________________________________________________________________
Merianstrasse 28, D-63069 Offenbach
Phone
+49 (0) 69 83 06-0
Telefax +49 (0) 69 83 06-555
VDE Prüf- und Zertifizierungsinstitut
Zeichengenehmigung
Ausweis-Nr. /
Certificate No.
Beiblatt /
Supplement
40013649
Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder
I-Sheng Electric Wire & Cable Co., Ltd., No. 52 Tin Hwu Road,
TAOYUAN HSIEN, TAIWAN
Ta Hua Village, 33334 GWAI SAN,
Aktenzeichen / File ref.
letzte Änderung / updated Datum / Date
1276300-1560-0006 / 169788 / FG45 / SHA
2012-10-22
2005-04-12
Dieses Beiblatt ist Bestandteil des Zeichengenehmigungsausweises Nr. 40013649.
This supplement is part of the Certificate No. 40013649.
Stecker ohne Schutzkontakt, nicht wiederanschließbar, umspritzt
Plug, without earthing contact, non-rewirable, moulded
Fertigungsstätte(n)
Place(s) of manufacture
Referenz/Reference
30006550
I-Sheng Mfg (Song Gang) Factory
Tang Xiayong Road
Songgang Town
518105 BAOAN AREA, SHENZHEN
Guangdong
CHINA
Referenz/Reference
30005950
I-Sheng Electric Wire & Cable
Co., Ltd.
No. 52 Tin Hwu Road, Ta Hua Village
33334 GWAI SAN, TAOYUAN HSIEN
TAIWAN
Referenz/Reference
30006554
I-Sheng Electronics
(Kunshan) Co., Ltd.
888 Tai Shan Road
Kunshan Development Zone
215300 KUNSHAN CITY
Jiangsu
CHINA
Referenz/Reference
30019097
I-Sheng Electric Wire & Cable
Company (Vietnam)
Lot D4-2 Que Vo Road
Que Vo Industrial Park
BAC NINH PROVINCE
VIETNAM
VDE Prüf- und Zertifizierungsinstitut GmbH
VDE Testing and Certification Institute
Fachgebiet FG45
Section FG45
VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute
_____________________________________________________________________
Merianstrasse 28, D-63069 Offenbach
Phone
+49 (0) 69 83 06-0
Telefax +49 (0) 69 83 06-555
VDE Prüf- und Zertifizierungsinstitut
Zeichengenehmigung
Ausweis-Nr. /
Certificate No.
Infoblatt /
Info sheet
40013649
Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder
I-Sheng Electric Wire & Cable Co., Ltd., No. 52 Tin Hwu Road,
TAOYUAN HSIEN, TAIWAN
Ta Hua Village, 33334 GWAI SAN,
Aktenzeichen / File ref.
letzte Änderung / updated Datum / Date
1276300-1560-0006 / 169788 / FG45 / SHA
2012-10-22
2005-04-12
Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zeichengenehmigungsausweises Nr. 40013649
This supplement is only valid in conjunction with page 1 of the Certificate No. 40013649.
Genehmigung zum Benutzen des auf Seite 1 abgebildeten markenrechtlich geschützten Zeichens des
VDE:
Grundlage für die Benutzung sind die Allgemeinen Geschäftsbedingungen (AGB) der VDE Prüf- und
Zertifizierungsinstitut GmbH (www.vde.com\AGB-Institut). Das Recht zur Benutzung erstreckt sich nur
auf die bezeichnete Firma mit den genannten Fertigungsstätten und die oben aufgeführten Produkte
mit den zugeordneten Bezeichnungen. Die Fertigungsstätte muss so eingerichtet sein, dass eine
gleichmäßige Herstellung der geprüften und zertifizierten Ausführung gewährleistet ist.
Die Genehmigung ist so lange gültig wie die VDE-Bestimmungen gelten, die der Zertifizierung zugrunde gelegen haben, sofern sie nicht auf Grund anderer Bedingungen aus der VDE Prüf- und
Zertifizierungsordnung (PM102) zurückgezogen werden muss.
Der Gültigkeitszeitraum einer VDE-GS-Zeichengenehmigung kann auf Antrag verlängert werden. Bei
gesetzlichen und / oder normativen Änderungen kann die VDE-GS-Zeichengenehmigung ihre Gültigkeit
zu einem früheren als dem angegebenen Datum verlieren.
Produkte, die das Biozid Dimethylfumarat (DMF) enthalten, dürfen gemäß der Kommissionsentscheidung 2009/251/EG nicht mehr in den Verkehr gebracht oder auf dem Markt bereitgestellt
werden.
Der VDE-Zeichengenehmigungsausweis wird ausschließlich auf der ersten Seite unterzeichnet.
Approval to use the legally protected Mark of the VDE as shown on the first page:
Basis for the use are the general terms and conditions of the VDE Testing and Certification Institute
(www.vde.com\terms-institute). The right to use the mark is granted only to the mentioned company
with the named places of manufacture and the listed products with the related type references. The
place of manufacture shall be equipped in a way that a constant manufacturing of the certified
construction is assured.
The approval is valid as long as the VDE specifications are in force, on which the certification is
based on, unless it is withdrawn according to the VDE Testing and Certification Procedure
(PM102E).
The validity period of a VDE-GS-Mark Approval may be prolonged on request. In case of changes in
legal and / or normative requirements, the validity period of a VDE-GS-Mark Approval may be
shortened.
Products containing the biocide dimethylfumarate (DMF) may not be marketed or made available on
the EC market according to the Commission Decision 2009/251/EC.
The approval is solely signed on the first page.
Aktenzeichen:
File ref.:
1276300-1560-0006/169788
ZEICHENGENEHMIGUNG
MARKS APPROVAL
Stecker
Plug
2-polig ohne Schutzkontakt
2-pole without earthing contact
Ausführung:
Construction:
zentrale Leitungseinführung
straight cable entry
Ausweis-Nr.:
Approval No.:
40013649
Datum
Date
2012-10-22
Anlage-Nr.:
Appendix No.:
100A
H05RR-F 2x 1,0 mm²
H05RR-F 2x 1,5 mm²
H05RN-F 2x 0,75 mm²
H05RN-F 2x 1,0 mm²
H07RN-F 2x 1,0 mm²
H07RN-F 2x 1,5 mm²
H03RT-H 2x 0,75 mm²
H03RT-H 2x 1,0 mm²
H05V2V2-F 2x 0,75 mm²
H05V2V2-F 2x 1,0 mm²
H05V2V2-F 2x 1,5 mm²
H05V2V2H2-F 2x0,75 mm²
I-SHENG
H05RR-F 2x 0,75 mm²
SP-021A
Leitungsaufdruck
Marking on cable
H05VV-F 2x 1,5 mm²
Typ(en)
Type(s)
H05VV-F 2x 1,0 mm²
(Kunshan); China
H05VV-F 2x 0,75 mm²
“K“:
H03VV-F 2x 0,75 mm²
30006554 :
H03V2V2H2-F 2x 0,75 mm²
Gwai San; Taiwan
H05VVH2-F 2x 1,0 mm²
“ohne/without“:
H05VVH2-F 2x 0,75 mm²
30005950 :
H03VVH2-F 2x 0,75 mm²
(Song Gang); China
H03VVH2-F 2x 0,5 mm²
“C“:
Position im VDE-Ausweis
Position in VDE-approval
30006550 :
(max. 2 m)
Fertigungsstätte / Place of manufacture:
X
X
X
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
X
ê
genehmigte Ausführung / approved version
Werkstoff der Umspritzung:
Material of the moulding:
Typ; Farbe
Type; colour
PVC; alle Farben / all colours
Werkstoff der Trägerteile:
Material of the base:
Typ; Hersteller; Farbe
Type; manufacturer; colour
PBT Typ(e) 5630; schwarz / black
Chang Chun Plastics Co., Ltd.
Inneneinsatz:
Insert:
Typ; Hersteller
Type; manufacturer
P98003P; GEM Terminal Ind. Co.
VDE Prüf- und Zertifizierungsinstitut GmbH
Diese Anlage gilt nur in Verbindung mit Blatt 1 der Zeichengenehmigung
This Appendix is only valid in conjunction with page 1 of the marks approval
---
ê
nicht genehmigt / not approved
Fachgebiet FG45
Section FG45
Aktenzeichen:
File ref.:
1276300-1560-0006/169788
ZEICHENGENEHMIGUNG
MARKS APPROVAL
Stecker
Plug
2-polig ohne Schutzkontakt
2-pole without earthing contact
Ausführung:
Construction:
zentrale Leitungseinführung
straight cable entry
Ausweis-Nr.:
Approval No.:
40013649
Datum
Date
2012-10-22
Anlage-Nr.:
Appendix No.:
101A
H03VV-F 2x 0,5 mm²
H03VV-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
H05VV-F 2x 1,0 mm²
H05VV-F 2x 1,5 mm²
H05RR-F 2x 0,75 mm²
H05RR-F 2x 1,0 mm²
H05RR-F 2x 1,5 mm²
H05RN-F 2x 0,75 mm²
H05RN-F 2x 1,0 mm²
H07RN-F 2x 1,0 mm²
H07RN-F 2x 1,5 mm²
H03RT-H 2x 0,75 mm²
H03RT-H 2x 1,0 mm²
H05V2V2-F 2x 0,75 mm²
H05V2V2-F 2x 1,0 mm²
(max. 2 m)
H05VVH2-F 2x 1,0 mm²
SP-021A
Leitungsaufdruck
Marking on cable
H05VVH2-F 2x 0,75 mm²
Typ(en)
Type(s)
I-Sheng Electric; Bac Ninh Province; Vietnam
H03VVH2-F 2x 0,75 mm²
„V“:
H03VVH2-F 2x 0,5 mm²
Position im VDE-Ausweis
Position in VDE-approval
30019097 :
(max. 2 m)
Fertigungsstätte / Place of manufacture:
I-SHENG SGIS
X
X
X
X
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
X
ê
genehmigte Ausführung / approved version
Werkstoff der Umspritzung:
Material of the moulding:
Typ; Farbe
Type; colour
PVC; alle Farben / all colours
Werkstoff der Trägerteile:
Material of the base:
Typ; Hersteller; Farbe
Type; manufacturer; colour
PBT Typ(e) 5630; schwarz / black
Chang Chun Plastics Co., Ltd.
Inneneinsatz:
Insert:
Typ; Hersteller
Type; manufacturer
P98003P; GEM Terminal Ind. Co.
VDE Prüf- und Zertifizierungsinstitut GmbH
Diese anlage gilt nur in Verbindung mit Blatt 1 der Zeichengenehmigung
This Appendix is only valid in conjunction with page 1 of the marks approval
---
ê
---
---
nicht genehmigt / not approved
Fachgebiet FG45
Section FG45
Aktenzeichen:
File ref.:
1276300-1560-0006/169788
ZEICHENGENEHMIGUNG
MARKS APPROVAL
Stecker
Plug
2-polig ohne Schutzkontakt
2-pole without earthing contact
Ausführung:
Construction:
zentrale Leitungseinführung
straight cable entry
Ausweis-Nr.:
Approval No.:
40013649
Datum
Date
2012-10-22
Anlage-Nr.:
Appendix No.:
102A
H05VVH2-F 2x 1,0 mm²
H03V2V2H2-F 2x 0,75 mm²
H03VV-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
H05VV-F 2x 1,0 mm²
H05VV-F 2x 1,5 mm²
H05RR-F 2x 0,75 mm²
H05RR-F 2x 1,0 mm²
H05RR-F 2x 1,5 mm²
H05RN-F 2x 0,75 mm²
H05RN-F 2x 1,0 mm²
H07RN-F 2x 1,0 mm²
H07RN-F 2x 1,5 mm²
H03RT-H 2x 0,75 mm²
H03RT-H 2x 1,0 mm²
H05V2V2-F 2x 0,75 mm²
H05V2V2-F 2x 1,0 mm²
H05V2V2-F 2x 1,5 mm²
H05V2V2H2-F 2x0,75 mm²
SP-021A
Leitungsaufdruck
Marking on cable
H05VVH2-F 2x 0,75 mm²
Typ(en)
Type(s)
(Song Gang); China
H03VVH2-F 2x 0,75 mm²
“C“:
H03VVH2-F 2x 0,5 mm²
Position im VDE-Ausweis
Position in VDE-approval
30006550 :
(max. 2 m)
Fertigungsstätte / Place of manufacture:
I-SHENG SGIS
X
X
X
X
X
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
X
ê
genehmigte Ausführung / approved version
---
ê
Werkstoff der Umspritzung:
Material of the moulding:
Typ; Farbe
Type; colour
PVC; alle Farben / all colours
Werkstoff der Trägerteile:
Material of the base:
Typ; Hersteller; Farbe
Type; manufacturer; colour
PBT Typ(e) 5630; schwarz / black
Chang Chun Plastics Co., Ltd.
PBT Typ(e) 3080; schwarz / black
NANTONG ORIENT PLASTIC CO.,LTD.
Inneneinsatz:
Insert:
Typ; Hersteller
Type; manufacturer
P98003P; GEM Terminal Ind. Co.
AC4000142
Suzhou Zhucheng Electrical Co.,Ltd.
VDE Prüf- und Zertifizierungsinstitut GmbH
Diese Anlage gilt nur in Verbindung mit Blatt 1 der Zeichengenehmigung
This Appendix is only valid in conjunction with page 1 of the marks approval
nicht genehmigt / not approved
Fachgebiet FG45
Section FG45
Aktenzeichen:
File ref.:
1276300-1560-0006/169788
ZEICHENGENEHMIGUNG
MARKS APPROVAL
Stecker
Plug
2-polig ohne Schutzkontakt
2-pole without earthing contact
Ausführung:
Construction:
zentrale Leitungseinführung
straight cable entry
Ausweis-Nr.:
Approval No.:
40013649
Datum
Date
2012-10-22
Anlage-Nr.:
Appendix No.:
103A
H05VV-F 2x 1,0 mm²
H05VV-F 2x 1,5 mm²
H05RR-F 2x 0,75 mm²
H05RR-F 2x 1,0 mm²
H05RR-F 2x 1,5 mm²
H05RN-F 2x 0,75 mm²
H05RN-F 2x 1,0 mm²
H07RN-F 2x 1,0 mm²
H07RN-F 2x 1,5 mm²
H03RT-H 2x 0,75 mm²
H03RT-H 2x 1,0 mm²
H05V2V2-F 2x 0,75 mm²
H05V2V2-F 2x 1,0 mm²
H05V2V2-F 2x 1,5 mm²
H05V2V2H2-F 2x0,75 mm²
---
---
---
X
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
I-SHENG KSIS
X
X
X
X
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
X
ê
H03VV-F 2x 0,75 mm²
---
H05VVH2-F 2x 1,0 mm²
I-SHENG SGIS
H05VVH2-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
SP-021A
Leitungsaufdruck
Marking on cable
H03VVH2-F 2x 0,75 mm²
Typ(en)
Type(s)
(Kunshan); China
H03V2V2H2-F 2x 0,75 mm²
“K“:
H03VVH2-F 2x 0,5 mm²
Position im VDE-Ausweis
Position in VDE-approval
30006554 :
(max. 2 m)
Fertigungsstätte / Place of manufacture:
genehmigte Ausführung / approved version
---
ê
Werkstoff der Umspritzung:
Material of the moulding:
Typ; Farbe
Type; colour
PVC; alle Farben / all colours
Werkstoff der Trägerteile:
Material of the base:
Typ; Hersteller; Farbe
Type; manufacturer; colour
PBT Typ(e) 5630; schwarz / black
Chang Chun Plastics Co., Ltd.
PBT Typ(e) 3080; schwarz / black
NANTONG ORIENT PLASTIC CO.,LTD.
Inneneinsatz:
Insert:
Typ; Hersteller
Type; manufacturer
P98003P; GEM Terminal Ind. Co.
AC4000142
Suzhou Zhucheng Electrical Co.,Ltd.
VDE Prüf- und Zertifizierungsinstitut GmbH
Diese Anlage gilt nur in Verbindung mit Blatt 1 der Zeichengenehmigung
This Appendix is only valid in conjunction with page 1 of the marks approval
nicht genehmigt / not approved
Fachgebiet FG45
Section FG45
DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-04047
1/3
2015-03-24
Certificate Holder
I-Sheng Electric Wire & Cable Co., Ltd.
52, Tin Hwu Road
Ta Gann Village, Gwai San Hsian
33334 TAOYUAN HSIEN, TAIWAN
Manufacturer
I-Sheng Electric Wire & Cable Co., Ltd.
52, Tin Hwu Road
Ta Gann Village, Gwai San Hsian
33334 TAOYUAN HSIEN, TAIWAN
Production site
I-Sheng Manufacturing (Song Gang) Factory
Tang Xia Yong Road
Songgang Town, Bao'An District
Shenzhen City
GUANGDONG 518105,CHINA
See Page 2
Certified Product
Model
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certification Manager
Jan-Erik Storgaard
Certification Body
Plug, non-rewirable
6HH3DJH
I-SHENG
250 V~
2,5 A
20
EN 50075:1990
NCS/FI 29036 issued on 2015-03-16
SHH3DJH
2020-03-16
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
info.dk@ul.com
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-04047
2/3
2015-03-24
Model Details:
SP-021A with cord H05VVH2-F 2X0,75-1
63$Zith cord H03VVH2-F 2X0,5-0,75
63$with cord H03V2V2H2-F 2X0,75
63$Zith cord H03Z1Z1H2-F 2X0,75
63$Zith cord H05Z1Z1H2-F 2X0,75
Production Sites:
I-Sheng Electronics (Kunshan) Co., Ltd.
888 Tai Shan Road
Kunshan Development Zone
215300 Kunshan City
JIANG SU PROVINCE,CHINA
I-Sheng Electric Wire & Cable Company (Vietnam)
Lot D4-2 Que Vo Road
Que Vo Industrial Park
BAC NINH PROVINCE,VIETNAM
External Certification Information:
NCS/FI 29036, issued on 2015-03-16 by SGS Fimko Ltd.
Additional Information:
6WDQGDUGVKHHW
This certificate replaces the certificate No. 315362-01, dated 2010-07-30 due to new testing and removed one
Manufacturing site.
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-04047
3/3
2015-03-24
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com
www.ul-europe.com
CERTIFICATE
No. P05204545/A2
Order No.
128198
Accredited Certificate (ref. NA-PROD 001)
Page 1/3
Product
Plugs
Applicant
I-Sheng Electric Wire & Cable Co. Ltd.
52, Tin Hwu Road, Ta Gann Village, Gwai San Hsian
33334 Taoyuan Hsien
Taiwan
Manufacturer
I-Sheng Electric Wire & Cable Co. Ltd.
52, Tin Hwu Road, Ta Gann Village, Gwai San Hsian
33334 Taoyuan Hsien
Taiwan
Factory
See page 2
Ratings
2.5A 250V AC
Trade mark
I-SHENG
Model / Type Ref.
SP-021A
Principal characteristics
Non-rewirable two-pole plug for Class II appliances. Standard Sheet
I. Thermoplastic, with H05VVH2-F 2x0.75-1.0mm². IP20
See next page(s)
A sample of the product was tested
and found to be in conformity with
INST
EN 50075:1990
Replaces
This certificate replaces previous certificate No. P05204545/A1, due to adding
a new factory site.
Validity
This certificate documents conformity with the standards shown, and also applies as license for use
of Nemkos name and certification mark. The certificate and license is valid as long as the
applicable conditions are complied with, and provided that any changes to the product are notified
to Nemko for acceptance prior to implementation.
New standards or amendments to the standards may imply that the product design must be
updated and/or that re-testing and re-certification is necessary.
Additional information
See next page(s)
Additional model(s)
See next page(s)
Date of issue 12-05-2009
Signature
Juan Z. Kleppenes
Certification Department
Nemko AS
Office address
Internet
Telephone
Fax
P.O. Box 73, Blindern
Gaustadalléen 30
www.nemko.com
+47 22 96 03 30
+ 47 22 96 05 50
N-0314 Oslo, Norway
Oslo
Enterprise number:
NO 974404532
CERTIFICATE
No. P05204545/A2
Order No.
128198
Accredited Certificate (ref. NA-PROD 001)
Product
Plugs
Pos. No
1
Model / Type Ref.
SP-021A
Page 2/3
Trade mark (if different from page 1)
Rating
2.5A 250V AC
Principal characteristics
Non-rewirable two-pole plug for Class II appliances. Standard Sheet I.
Thermoplastic, with H03VVH2-F 2x0.5-0.75mm². IP20
Product
Plugs
Pos. No
2
Model / Type Ref.
SP-021A
Trade mark (if different from page 1)
Rating
2.5A 250V AC
Principal characteristics
Non-rewirable two-pole plug for Class II appliances. Standard Sheet I.
Thermoplastic, with H03V2V2H2-F 2x0.75mm². IP20
Product
Plugs
Pos. No
3
Model / Type Ref.
SP-021A
Trade mark (if different from page 1)
Rating
2.5A 250V AC
Principal characteristics
Non-rewirable two-pole plug for Class II appliances. Standard Sheet I.
Thermoplastic, with H03Z1Z1H2-F 2x0.75mm². IP20
Product
Plugs
Pos. No
4
Model / Type Ref.
SP-021A
Trade mark (if different from page 1)
Rating
2.5A 250V AC
Principal characteristics
Non-rewirable two-pole plug for Class II appliances. Standard Sheet I.
Thermoplastic, with H05Z1Z1H2-F 2x0.75mm². IP20
Factories:
I-Sheng Manufacturing (Songgang) Factory
Tang Xia Yong Road, Songgang Town, Bao An District
Shenzhen City 518105, Guangdong
China
I-Sheng Electric Wire & Cable Co. Ltd.
52, Tin Hwu Road, Ta Gann Village, Gwai San Hsian
33334 Taoyuan Hsien
Taiwan
Date of issue 12-05-2009
Signature
Juan Z. Kleppenes
Certification Department
Nemko AS
Office address
Internet
Telephone
Fax
P.O. Box 73, Blindern
Gaustadalléen 30
www.nemko.com
+47 22 96 03 30
+ 47 22 96 05 50
N-0314 Oslo, Norway
Oslo
Enterprise number:
NO 974404532
CERTIFICATE
No. P05204545/A2
Order No.
128198
Accredited Certificate (ref. NA-PROD 001)
I-Sheng Electronics (Kunshan) Co., Ltd.
No. 888, Tai Shan Road, Kunshan Development Zone
Kun Shan City, JiangSu
China
Page 3/3
I-Sheng Electric Wire & Cable Company (Vietnam)
Lot D4-2 Que Vo Road, Que Vo Industrial Park
Bac Ninh Province
Viet Nam
Date of issue 12-05-2009
Signature
Juan Z. Kleppenes
Certification Department
Nemko AS
Office address
Internet
Telephone
Fax
P.O. Box 73, Blindern
Gaustadalléen 30
www.nemko.com
+47 22 96 03 30
+ 47 22 96 05 50
N-0314 Oslo, Norway
Oslo
Enterprise number:
NO 974404532
Q Prüf- und Zertifizierungsinstitut GmbH
Aktenzeichen:
File reference:
Ausweis-Nr.:
Certificate No.:
1276300-1550-0007/110051
Anlage Nr.:
Appendix No.:
40026860
Seite:
Page:
100
Datum:
Date:
1/1
2009-04-17
Diese Anlage ist Bestandteil des Genehmigungsausweises. This appendix is part of the certificate.
Gerätesteckdose, nicht-wiederanschließbar
Connector, non-rewirable
Fertigungsstätte / Place of manufacture:
2-polig ohne Schutzkontakt
2-pole without earthing contact
30005950:
Kennzeichnung / Identification :
keine / none
---
Typ(en)
Type(s)
Leitungsaufdruck
Marking on cable
H05VVH2-F 2x 0,75 mm²
H05VVH2-F 2x 1,0 mm²
H03VV-F 2x 0,5 mm² (max. 2 m)
H03VV-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
H05VV-F 2x 1,0 mm²
H05RR-F 2x 0,75 mm²
H05RN-F 2x 0,75 mm²
H05V2V2-F 2x 0,75 mm²
/ approved version
H03VVH2-F 2x 0,75 mm²
ê genehmigte Ausführung
H03VVH2-F 2x 0,5 mm² (max. 2 m)
X
Position im VDE-Ausweis
Position in VDE-licence
zentrale Leitungseinführung
straight cable entry
IS-033
I-SHENG
---
x
---
---
---
---
---
---
---
---
---
---
ê nicht genehmigt
---
Glühdrahtfestigkeit (°C) / Glow wire restistance (°C)
Werkstoff der Trägerteile:
Material of the base:
1.
PC; Typ(e) L-1250
TELJIN Chemicals Ltd.
schwarz / black
Inneneinsatz:
Insert:
1.
MI333112
I-Sheng
Werkstoff der Umspritzung:
Material of the moulding:
PVC
alle Farben / all colours
750 °C
650 °C
VDE Prüf- und Zertifizierungsinstitut GmbH - Fachbereich F3
VDE Testing and Certification Institute - Department F3
---
---
---
---
/ not approved
---
---
---
---
Q Prüf- und Zertifizierungsinstitut GmbH
Aktenzeichen:
File reference:
Ausweis-Nr.:
Certificate No.:
1276300-1550-0007/110051
Anlage Nr.:
Appendix No.:
40026860
Seite:
Page:
101
Datum:
Date:
1/1
2009-04-17
Diese Anlage ist Bestandteil des Genehmigungsausweises. This appendix is part of the certificate.
Gerätesteckdose, nicht-wiederanschließbar
Connector, non-rewirable
Fertigungsstätte / Place of manufacture:
2-polig ohne Schutzkontakt
2-pole without earthing contact
30006550:
Kennzeichnung / Identification :
C
---
Typ(en)
Type(s)
Leitungsaufdruck
Marking on cable
H05VVH2-F 2x 0,75 mm²
H05VVH2-F 2x 1,0 mm²
H03VV-F 2x 0,5 mm² (max. 2 m)
H03VV-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
H05VV-F 2x 1,0 mm²
H05RR-F 2x 0,75 mm²
H05RN-F 2x 0,75 mm²
H05V2V2-F 2x 0,75 mm²
/ approved version
H03VVH2-F 2x 0,75 mm²
ê genehmigte Ausführung
H03VVH2-F 2x 0,5 mm² (max. 2 m)
X
Position im VDE-Ausweis
Position in VDE-licence
zentrale Leitungseinführung
straight cable entry
IS-033
I-SHENG SGIS
---
x
---
---
---
---
---
---
---
---
---
---
ê nicht genehmigt
---
Glühdrahtfestigkeit (°C) / Glow wire restistance (°C)
Werkstoff der Trägerteile:
Material of the base:
1.
PC; Typ(e) L-1250
TELJIN Chemicals Ltd.
schwarz / black
Inneneinsatz:
Insert:
1.
MI333112
I-Sheng
Werkstoff der Umspritzung:
Material of the moulding:
PVC
alle Farben / all colours
750 °C
650 °C
VDE Prüf- und Zertifizierungsinstitut GmbH - Fachbereich F3
VDE Testing and Certification Institute - Department F3
---
---
---
---
/ not approved
---
---
---
---
Q Prüf- und Zertifizierungsinstitut GmbH
Aktenzeichen:
File reference:
Ausweis-Nr.:
Certificate No.:
1276300-1550-0007/110051
Anlage Nr.:
Appendix No.:
40026860
Seite:
Page:
102
Datum:
Date:
1/1
2009-04-17
Diese Anlage ist Bestandteil des Genehmigungsausweises. This appendix is part of the certificate.
Gerätesteckdose, nicht-wiederanschließbar
Connector, non-rewirable
Fertigungsstätte / Place of manufacture:
2-polig ohne Schutzkontakt
2-pole without earthing contact
30006554:
Kennzeichnung / Identification :
K
---
Typ(en)
Type(s)
Leitungsaufdruck
Marking on cable
H05VVH2-F 2x 0,75 mm²
H05VVH2-F 2x 1,0 mm²
H03VV-F 2x 0,5 mm² (max. 2 m)
H03VV-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
H05VV-F 2x 1,0 mm²
H05RR-F 2x 0,75 mm²
H05RN-F 2x 0,75 mm²
H05V2V2-F 2x 0,75 mm²
/ approved version
H03VVH2-F 2x 0,75 mm²
ê genehmigte Ausführung
H03VVH2-F 2x 0,5 mm² (max. 2 m)
X
Position im VDE-Ausweis
Position in VDE-licence
zentrale Leitungseinführung
straight cable entry
IS-033
I-SHENG KSIS
---
x
---
---
---
---
---
---
---
---
---
---
ê nicht genehmigt
---
Glühdrahtfestigkeit (°C) / Glow wire restistance (°C)
Werkstoff der Trägerteile:
Material of the base:
1.
PC; Typ(e) L-1250
TELJIN Chemicals Ltd.
schwarz / black
Inneneinsatz:
Insert:
1.
MI333112
I-Sheng
Werkstoff der Umspritzung:
Material of the moulding:
PVC
alle Farben / all colours
750 °C
650 °C
VDE Prüf- und Zertifizierungsinstitut GmbH - Fachbereich F3
VDE Testing and Certification Institute - Department F3
---
---
---
---
/ not approved
---
---
---
---
Q Prüf- und Zertifizierungsinstitut GmbH
Aktenzeichen:
File reference:
Ausweis-Nr.:
Certificate No.:
1276300-1550-0007/110051
Anlage Nr.:
Appendix No.:
40026860
Seite:
Page:
103
Datum:
Date:
1/1
2009-04-17
Diese Anlage ist Bestandteil des Genehmigungsausweises. This appendix is part of the certificate.
Gerätesteckdose, nicht-wiederanschließbar
Connector, non-rewirable
Fertigungsstätte / Place of manufacture:
2-polig ohne Schutzkontakt
2-pole without earthing contact
30019097:
Kennzeichnung / Identification :
V (im Kreis / in a circle)
---
Typ(en)
Type(s)
Leitungsaufdruck
Marking on cable
H05VVH2-F 2x 0,75 mm²
H05VVH2-F 2x 1,0 mm²
H03VV-F 2x 0,5 mm² (max. 2 m)
H03VV-F 2x 0,75 mm²
H05VV-F 2x 0,75 mm²
H05VV-F 2x 1,0 mm²
H05RR-F 2x 0,75 mm²
H05RN-F 2x 0,75 mm²
H05V2V2-F 2x 0,75 mm²
/ approved version
H03VVH2-F 2x 0,75 mm²
ê genehmigte Ausführung
H03VVH2-F 2x 0,5 mm² (max. 2 m)
X
Position im VDE-Ausweis
Position in VDE-licence
zentrale Leitungseinführung
straight cable entry
IS-033
I-SHENG SGIS
---
x
---
---
---
---
---
---
---
---
---
---
ê nicht genehmigt
---
Glühdrahtfestigkeit (°C) / Glow wire restistance (°C)
Werkstoff der Trägerteile:
Material of the base:
1.
PC; Typ(e) L-1250
TELJIN Chemicals Ltd.
schwarz / black
Inneneinsatz:
Insert:
1.
MI333112
I-Sheng
Werkstoff der Umspritzung:
Material of the moulding:
PVC
alle Farben / all colours
750 °C
650 °C
VDE Prüf- und Zertifizierungsinstitut GmbH - Fachbereich F3
VDE Testing and Certification Institute - Department F3
---
---
---
---
/ not approved
---
---
---
---
DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03068
1/3
2013-12-30
Certificate Holder
I-SHENG ELECTRIC WIRE & CABLE CO LTD
52 TIN HWU RD
TA GANN VILLAGE
GWAI SAN HSIAN, 33334 TAOYUAN HSIEN Taiwan
Manufacturer
I-SHENG ELECTRIC WIRE & CABLE CO LTD
52 TIN HWU RD
TA GANN VILLAGE
GWAI SAN HSIAN, 33334 TAOYUAN HSIEN Taiwan
Production site
I-SHENG ELECTRIC WIRE & CABLE CO (VIETNAM)
LOT D4-2, QUE VO ROAD
QUE VO INDUSTRIAL PARK
QUE VO DISTRICT
BAC NINH Viet Nam
See Page 2
Certified Product
Model
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certification Manager
Jan-Erik Storgaard
Certification Body
Connector, non-rewirable
IS-033, with cord H03Z1Z1H2-F 2X-0,75 mm²
IS-033, with cord H03VVH2-F 2X0,5-0,75 mm²
I-Sheng
250 V~
2,5 A
20
EN 60320-1:2001/A1:2007, EN 60320-1:2001
NCS/FI 28345 issued on 2013-12-13
Standard sheet C7
2018-12-13
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
info.dk@ul.com
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03068
2/3
2013-12-30
Production Sites:
I-SHENG ELECTRIC WIRE & CABLE CO LTD
52 TIN HWU RD
TA GANN VILLAGE
GWAI SAN HSIAN, 33334 TAOYUAN HSIEN Taiwan
I-SHENG ELECTRONICS (KUN SHAN) CO LTD
NO. 888 TAI SHAN ROAD
KUNSHAN DEVELOPMENT ZONE
KUNSHAN CITY, 215300 JIANGSU China
I-SHENG MANUFACTURING(SONG GANG) FACTORY
TANG XIA YONG RD
SONGGANG TOWN
BAO'AN AREA
SHENZHEN, 518105 GUANGDONG China
External Certification Information:
NCS/FI 28345 issued on 2013-12-13 by SGS Fimko Ltd
Additional Information:
This certificate replaces Demko certificate no. 314850-02 dated 2009-05-28 due to revising test report.
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-03068
3/3
2013-12-30
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com
www.ul-europe.com
CERTIFICATE
No. P13218074
Order No.
250452
Page 1/2
Product
Connector, non-rewirable
Applicant
I-Sheng Electric Wire & Cable Co., Ltd.
52, Tin Hwu Rd., Ta Gann Village, Gwai San Hsian
33334 Tao Yuan Hsien
Taiwan
Manufacturer
I-Sheng Electric Wire & Cable Co., Ltd.
52, Tin Hwu Rd., Ta Gann Village, Gwai San Hsian
33334 Tao Yuan Hsien
Taiwan
Factory
See page 2
Ratings
2.5A 250V~
Trade mark
I-SHENG
Model / Type Ref.
IS-033
Principal characteristics
Non-rewirable connector, with cord H03VVH2-F 2x0.5-0.75mm².
Standard Sheet C7. IP20
See next page(s)
A sample of the product was tested
and found to be in conformity with
INST
EN 60320-1:2001;A1
Validity
This certificate documents conformity with the standards shown, and also applies as license for use
of Nemkos name and certification mark. The certificate and license is valid as long as the
applicable conditions are complied with, and provided that any changes to the product are notified
to Nemko for acceptance prior to implementation. New standards or amendments to the standards
may imply that the product design must be updated and/or that re-testing and re-certification is
necessary.
Additional information
See next page(s)
Additional model(s)
See next page(s)
Date of issue 19-12-2013
Signature
Skule Moe
Certification Department
Nemko AS
Office address
Internet
P.O. Box 73, Blindern
Gaustadalléen 30
www.nemko.com
N-0314 Oslo, Norway
Oslo
Telephone
Fax
+47 22 96 03 30
+ 47 22 96 05 50
Enterprise number:
NO 974404532
CERTIFICATE
No. P13218074
Order No.
250452
Page 2/2
Product
Connector, non-rewirable
Pos. No
1
Model / Type Ref.
IS-033
Trade mark (if different from page 1)
Rating
2.5A 250V~
Principal characteristics
Non-rewirable connector, with cord H03Z1Z1H2-F 2x0.75mm². Standard
Sheet C7. IP20
Factories:
I-Sheng Manufacturing (Song Gang) Factory
Tang Xia Yong Road, Songgang Town, Bao' An District
Shenzhen City, Guangdong 518105
China
I-Sheng Electric Wire & Cable Co., Ltd.
52, Tin Hwu Rd., Ta Gann Village, Gwai San Hsian
33334 Tao Yuan Hsien
Taiwan
I-Sheng Electronics (Kunshan) Co., Ltd.
888 Tai Shan Road Kunshan Development Zone
215300 Kunshan City, Jiang Su Province
China
I-Sheng Electric Wire & Cable Company (Vietnam)
Lot D4-2 Que Vo Road, Que Vo Industrial Park
Bac Ninh Province
Viet Nam
Date of issue 19-12-2013
Signature
Skule Moe
Certification Department
Nemko AS
Office address
Internet
P.O. Box 73, Blindern
Gaustadalléen 30
www.nemko.com
N-0314 Oslo, Norway
Oslo
Telephone
Fax
+47 22 96 03 30
+ 47 22 96 05 50
Enterprise number:
NO 974404532
06 August 2013
9th Floor, No.12, Alley 100,
Lane 155, Tung Hwa North Road,
Taipei 105, Taiwan
Liza Yu Hsien Ting Huang
Attention: Ms Liza Huang
Dear Sir / Madam,
APPROVAL OF PRESCRIBED EQUIPMENT
Enclosed is the Certificate(s) in respect to your recent application received by Queensland Government (ESO).
Please take time to check the certificate to ensure that all details are correct in accordance with your application,
and that you understand all of the conditions imposed on the approval.
Should you have any queries,
pravin.venkatesan@justice.qld.gov.au
please
contact
Pravin
Venkatesan
on
telephone
,or
email
Any samples that accompanied your application are available for collection, and if not collected within 20 business
days of the date hereon may be disposed of.
Notification must be given to Queensland Government (ESO) of any change of registered Address within 20
business days.
Yours faithfully
DIRECTOR OF EQUIPMENT SAFETY
Ref: ESO130579/00
Queensland Government (ESO 50 Ann Street, Brisbane
)
GPO Box 69 Brisbane Qld 4001
ABN 13 846 673 994
Telephone (07) 3898 0359
Facsimile (07) 3406 3808
Certificate Number: ESO130579/00
Certificate of Approval
This is to certify that the Director of Equipment Safety has approved the electrical equipment described hereunder.
Registered Declarant:
Liza Yu Hsien Ting Huang
9th Floor, No.12, Alley 100,
Lane 155, Tung Hwa North Road,
Taipei 105, Taiwan
Required Marking: ESO130579
Electrical equipment covered by this approval must comply in all respects with the approved article, and
prior to being supplied or offered for supply, must be clearly and indelibly marked with the required
marking indicated above, or the Regulatory Compliance Mark (RCM) provided that the requirements of
all relevant parts of AS/NZS 4417 applicable to the article are fulfilled.
Any modifications to the electrical equipment or its place of manufacture must be approved by
Queensland Government (ESO) prior to the equipment being supplied or offered for supply.
Notification must be given to Queensland Government (ESO) of any change to the name or address of the
holder of the certificate within 20 business days.
ARTICLE DETAILS
Electrical Equipment:
Relevant Standards:
Expiry Date:
Conditions of Approval:
Prescribed
Appliance Connector
C7 type moulded appliance connector
AS/NZS60320.1: 2012
06 October 2018
Alternative certification mark Q88203
DATE OF APPROVAL:06 August 2013 Page: (2/ 4)
Director of Equipment Safety
Certificate Number: ESO130579/00
Approval details
Model
Rated at
Trade Name
Comments
IS-033
Input: 250V~, 2.5A
I-Sheng
Moulded to cords: H03VVH2-F
2X0.5mm² (2LDF/50) / H03VVH2-F
2X0.75mm² (2LDF/75)(Q90096) and
H03Z1Z1H2-F 2X0.75mm²
(Q090060).
Model
Rated at
Trade Name
Comments
IS-037
Input: 250V~, 2.5A
I-Sheng
Change of shape and moulded to
cords: H03VVH2-F 2x0.75mm²
(2LDF/75)(Q90096) / H05VVH2-F
2X0.75mm² (2LSF/75) (Q88228) and
H03Z1Z1H2-F 2X0.75mm² /
H05Z1Z1H2-F 2X0.75mm²
(Q090060).
Model
Rated at
Trade Name
Comments
IS-033B
Input: 250V~, 2.5A
I-Sheng
Change of rear dimensions to larger
size and moulded to cords: H03VVH2F 2X0.75mm² (2LDF/75) (Q90096)
and H03Z1Z1H2-F 2X0.75mm²
(Q090060).
Model
Rated at
Trade Name
Comments
IS-033L
Input: 250V~, 2.5A
I-Sheng
Offset cord entry; moulded to cords:
DATE OF APPROVAL:06 August 2013 Page: (3/ 4)
Director of Equipment Safety
Certificate Number: ESO130579/00
H03VVH2-F 2X0.75mm²
(2LDF/75)(Q90096) and H03Z1Z1H2F 2X0.75mm² (Q090060).
Model
Rated at
Trade Name
Comments
IS-033C
Input: 250V~, 2.5A
I-Sheng
Altered body shape; moulded to cords:
H03VVH2-F 2X0.5mm² (2LDF/50) /
H03VVH2-F 2X0.75mm² (2LDF/75)
(Q90096) and H03Z1Z1H2-F
2X0.5mm² / H03Z1Z1H2-F
2X0.75mm² (Q090060).
Model
Rated at
Trade Name
Comments
IS-033LS
Input: 250 V~, 2.5A
I-Sheng
Offset cord entry; moulded to cords:
H03VVH2-F 2X0.5mm² (2LDF/50)
and H03VVH2-F 2X0.75mm²
(2LDF/75) (Q90096).
DATE OF APPROVAL:06 August 2013 Page: (4/ 4)
Director of Equipment Safety
03 February 2015
9th Floor, No.12, Alley 100,
Lane 155, Tung Hwa North Road,
Taipei 105, Taiwan
Liza Yu Hsien Ting Huang
Attention: Ms Liza Huang
Dear Sir / Madam,
APPROVAL OF PRESCRIBED EQUIPMENT
Enclosed is the Certificate(s) in respect to your recent application received by Queensland Government (ESO).
Please take time to check the certificate to ensure that all details are correct in accordance with your application,
and that you understand all of the conditions imposed on the approval.
Should you have any queries, please contact Ben Taylor on telephone ,or email ben.taylor@justice.qld.gov.au
Any samples that accompanied your application are available for collection, and if not collected within 20 business
days of the date hereon may be disposed of.
Notification must be given to Queensland Government (ESO) of any change of registered Address within 20
business days.
Yours faithfully
DIRECTOR OF EQUIPMENT SAFETY
Ref: ESO130579/01
Queensland Government (ESO 50 Ann Street, Brisbane
)
GPO Box 69 Brisbane Qld 4001
ABN 13 846 673 994
Telephone (07) 3898 0359
Facsimile (07) 3406 3808
Certificate Number: ESO130579/01
Certificate of Approval
This is to certify that the Director of Equipment Safety has approved the electrical equipment described hereunder.
Registered Declarant:
Liza Yu Hsien Ting Huang
9th Floor, No.12, Alley 100,
Lane 155, Tung Hwa North Road,
Taipei 105, Taiwan
Required Marking: ESO130579
Electrical equipment covered by this approval must comply in all respects with the approved article, and
prior to being supplied or offered for supply, must be clearly and indelibly marked with the required
marking indicated above, or the Regulatory Compliance Mark (RCM) provided that the requirements of
all relevant parts of AS/NZS 4417 applicable to the article are fulfilled.
Any modifications to the electrical equipment or its place of manufacture must be approved by
Queensland Government (ESO) prior to the equipment being supplied or offered for supply.
Notification must be given to Queensland Government (ESO) of any change to the name or address of the
holder of the certificate within 20 business days.
ARTICLE DETAILS
Electrical Equipment:
Relevant Standards:
Expiry Date:
Conditions of Approval:
Prescribed
Appliance Connector
C7 type moulded appliance connector
AS/NZS60320.1: 2012
06 October 2018
Alternative certification mark Q88203
DATE OF APPROVAL:03 February
2015
Page: (2/ 3)
Director of Equipment Safety
Certificate Number: ESO130579/01
Approval details
Model
Rated at
Trade Name
Comments
IS-033
Input: 250V~, 2.5A
I-SHENG
moulded to alternative cord H05VVH2F 2x0.75mm² (2LSF/75, Q88228).
Model
Rated at
Trade Name
Comments
IS-033B
Input: 250V~, 2.5A
I-SHENG
Moulded to alternative cord H03VVH2F 2x0.5mm² (2LDF/50, Q90096).
Model
Rated at
Trade Name
Comments
IS-033F
Input: 250V~, 2.5A
I-SHENG
C7 Type Appliance Connector,
moulded to cords H03VVH2-F
2x0.5mm² or H03VVH2-F
2x0.75mm²(2LDF/50, Q90096).
DATE OF APPROVAL:03 February
2015
Page: (3/ 3)
Director of Equipment Safety
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2016:01:26 15:28:07+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2016:08:17 11:26:12+08:00 Metadata Date : 2016:08:17 11:26:12+08:00 Format : application/pdf Title : E:\樣品圖紙\SA組 周紅艷\2016年\1月\光寶\SR-160306-6 SP-021A+IS-033 H03VVH2-F 2X0.75 CT-12 1.8M.dwg Model (1) Creator : Administrator Document ID : uuid:253145f6-312d-4279-878c-f1b1cde6f9f0 Instance ID : uuid:614c9f5f-9feb-4941-a3a9-ff2393dc901c Has XFA : No Page Count : 80 Author : AdministratorEXIF Metadata provided by EXIF.tools