Manual Control Unit SLVA 4Kplus Installation Directions

2016-10-27

• 1 Intended use 6
• 2 Product description 7
  • 2.1 Product features 7
  • 2.2 Components of the light barrier safety system 7
  • 2.3 Connections on the SLVA-4Kplus 9
  • 2.4 Fuses 10
  • 2.5 Operating modes 10
    • 2.5.1 Setting the operating mode 10
    • 2.5.2 Start-up/restart interlock 11
    • 2.5.3 Relay monitor 11
    • 2.5.4 Emergency-Stop 12
  • 2.6 Indicator lights 13
    • 2.6.1 Internal control unit indicator lights 13
    • 2.6.2 External indicator lights 13
    • 2.6.3 Light barrier and light grid indicators 14
  • 2.7 Test 14
• 3 Arrangement and combination of light barriers and light grids 15
• 4 Installation/removal of the control unit 19
• 5 Installation 19
  • 5.1 SLA light barriers and SLP light grids 19
  • 5.2 Emergency-Stop circuit 19
  • 5.3 Indicator lights 19
  • 5.4 Safety outputs 20
  • 5.5 User check lists 20
    • 5.5.1 Before installation 20
    • 5.5.2 After installation 21
    • 5.5.3 Commissioning 21
    • 5.5.4 Periodic check 21
• 6 Commissioning 22
  • 6.1 Adjustment 22
  • 6.2 Checking the detection capability 22
  • 6.3 Checking the start-up/restart interlock and start-up enable 22
  • 6.4 Checking the test input 22
  • 6.5 Checking the relay monitor 22
  • 6.6 Checking the static Emergency-Stop 23
  • 6.7 Checking the pulsed Emergency-Stop 23
• 7 Technical data 24
  • 7.1 General specifications 24
  • 7.2 Electrical data 24
  • 7.3 Other data 25
  • 7.4 Dimensions 26
  • 7.5 Curves and diagrams 26
• 8 Periodic checks 27
• 9 Fault elimination 27
• 10 Circuit examples 29
• 11 Ordering information 32
• 12 Guarantee conditions 33
• 13 Glossary 33
• 14 Standards 34
  • 14.1 Construction and equipping of protective equipment 34
  • 14.2 Use and installation of protective equipment 34
• 1 Intended use
• 2 Product description
  • 2.1 Product features
  • 2.2 Components of the light barrier safety system
  • 2.4 Fuses
  • 2.5 Operating modes
    • 2.5.1 Setting the operating mode
    • 2.5.2 Start-up/restart interlock
    • 2.5.3 Relay monitor
  • 2.6 Indicator lights
    • 2.6.1 Internal control unit indicator lights
    • 2.6.2 External indicator lights
    • 2.6.3 Light barrier and light grid indicators
  • 2.7 Test
• 3 Arrangement and combination of light barriers and light grids
• 4 Installation/removal of the control unit
• 5 Installation
  • 5.1 SLA light barriers and SLP light grids
  • 5.2 Emergency-Stop circuit
  • 5.3 Indicator lights
  • 5.4 Safety outputs
  • 5.5 User check lists
    • 5.5.1 Before installation
    • 5.5.2 After installation
    • 5.5.3 Commissioning
    • 5.5.4 Periodic check
• 6 Commissioning
  • 6.1 Adjustment
  • 6.2 Checking the detection capability
  • 6.3 Checking the start-up/restart interlock and start-up enable
  • 6.4 Checking the test input
  • 6.5 Checking the relay monitor
  • 6.6 Checking the static Emergency-Stop
  • 6.7 Checking the pulsed Emergency-Stop
• 7 Technical data
  • 7.1 General specifications
  • 7.2 Electrical data
  • 7.3 Other data
  • 7.4 Dimensions
  • 7.5 Curves and diagrams
• 8 Periodic checks
• 9 Fault elimination
• 10 Circuit examples
• 11 Ordering information
• 12 Guarantee conditions
• 13 Glossary
• 14 Standards
  • 14.1 Construction and equipping of protective equipment
  • 14.2 Use and installation of protective equipment