638059 Catalog

26099-Catalog 26099-Catalog 26099-Catalog 622454 Batch7 unilog cesco-content

2014-09-04

: Pdf 638059-Catalog 638059-Catalog 622454 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 57

This literature is published in good faith and is believed to be reliable.

However, it does not represent and/or warrant in any manner the

information and suggestions contained in this brochure. Data presented is

the result of laboratory tests and field experience.

A policy of ongoing product improvement is maintained. This may result

in modifications of features and/or specifications without notice.

Customers call

IPEX USA LLC

Toll free: (800) 463-9572

www.ipexamerica.com

CUSTOMER SERVICE CENTER

www.ipexamerica.com

DISTRIBUTED BY:

Products manufactured by IPEX Electrical Inc. and distributed in the United

States by IPEX USA LLC.

INEXO®, Kwikflex®, Kwikon®, SceptaConTM, SceptalightTM and SuperDuct®are

trademarks of IPEX Branding Inc. Pocket Pro

ELECTRICAL SYSTEMS

Trenchless Raceways Systems

® TMTM

www.ipexamerica.com

About the IPEX Group of Companies

As leading suppliers of thermoplastic piping systems, the IPEX Group of

Companies provides our customers with some of the world’s largest and most

comprehensive product lines. All IPEX products are backed by more than

50 years of experience. With state-of-the-art manufacturing facilities and

distribution centers across North America, we have established a reputation

for product innovation, quality, end-user focus and performance.

Markets served by IPEX group products are:

•Electrical systems

•PVC, CPVC, PP, PVCO, ABS, PEX, FR-PVDF and PE pipe and fittings (1/4"

to 48")

•Industrial process piping systems

•Municipal pressure and gravity piping systems

•Plumbing and mechanical piping systems

•PE Electrofusion systems for gas and water

•Industrial, plumbing and electrical cements

•Irrigation systems

Indoor use primarily to provide protection

against contact with the enclosed equipment

and against a limited amount of falling dirt.

Indoor use to provide a degree of protection

against limited amounts of falling water and dirt.

Outdoor use to provide a degree of protection

against windblown rain; undamaged by the

formation of ice on the enclosure.

Either indoor or outdoor use to provide a

degree of protection against falling rain,

splashing water, and hose-directed water;

undamaged by the formation of ice on the

enclosure.

Either indoor or outdoor use to provide a

degree of protection against falling rain,

splashing water, and hose-directed water;

undamaged by the formation of ice on the

enclosure; resists corrosion.

Indoor or outdoor use primarily to provide a

degree of protection against hose-directed

water, the entry of water during prolonged

submersion at a limited depth, and be

undamaged by the formation of ice on the

enclosure.

Indoor use to provide a degree of protection

against dust, dirt, fiber flyings, dripping water,

and external condensation of noncorrosive

liquids.

Indoor use to provide a degree of protection

and spraying of water, oil, and noncorrosive

liquids.

1 2 3 4 5 6 7 8

TYPE

DESIGNATION UL UNDERWRITERS LABORATORIES INC

(UL 50 AND UL 508)

This material is reproduced with permission from Underwriters

Laboratories Inc. Standard for Safety for Cabinets and Boxes, UL

Underwriters Laboratories Inc. (UL) shall not be responsible to

anyone for the use of or reliance upon a UL Standard by anyone.

UL shall not incur any obligation or liability for damages,

including consequential damages, arising out of or in connection

with the use, interpretation of, or reliance upon a UL Standard.

Company

Name

Title

Address

City State Zip

Phone ext.

Fax E-mail / Website

This is a:

❏ Home Address ❏ Business Address ❏ Jobsite Address

Business Type:

(check 1 or 2 that best apply)

Company Classification:

❏ Distributor/Wholesaler

❏ Engineering Firm

❏ Contractor

❏ Government

❏ OEM - Products Manufactured:_______________________

❏ Other:_____________________________________________

SIC or industry sector:__________________________________

My primary markets are (check all that apply):

Tel: (905) 403-0264

Toll Free: (800) 463-9572

Fax: (905) 403-1124

Website: www.ipexamerica.com

IPEX

2441 Royal Windsor Drive

Mississauga, Ontario, Canada

L5J 4C7

PLEASE PRINT

Fax this form to (905) 403-1124 and we’ll add

you to our mailing list.

❏ Commercial

❏ Residential

❏ Industrial

❏ Other:_________________

❏ Utility

❏ OEM

❏ Institutional

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .1

Applications . . . . . . . . . . . . . . . . . . . . . . . . .2

Advantages . . . . . . . . . . . . . . . . . . . . . . . . . .3

Scepter®Rigid PVC Schedule 40 & 80 Conduit .7

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Expansion and Contraction . . . . . . . . . . . . . . . . . .10

Conduit Dimensions . . . . . . . . . . . . . . . . . . . . . . .15

Scepter®PVC Conduit Fittings . . . . . . . . . . . .19

Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Weatherproof Covers . . . . . . . . . . . . . . . . . . . . . . .46

Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Conduit Repair Kit . . . . . . . . . . . . . . . . . . . . .57

EPR Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

SceptalightTM: Nonmetallic Light Fixtures . . . .59

Kwikflex® . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Nonmetallic Liquidtight Flexible Conduit . . . . . . . .67

Nonmetallic Liquidtight Fittings . . . . . . . . . . . . . . .68

Kwikon®ENT . . . . . . . . . . . . . . . . . . . . . . . . .71

ENT Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Couplings/Connectors . . . . . . . . . . . . . . . . . . . . . .75

Slab Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

ENT Wall Boxes, Ceiling Boxes & Covers . . . . . . . . .81

Short Form Sample Specifications . . . . . . . . . . . . .82

INEXO®ICF Boxes . . . . . . . . . . . . . . . . . . . . .85

....continued

1ii TABLE OF CONTENTS INTRODUCTION

Pocket Pro provides the most comprehensive information about

PVC systems – from basic raw material to installation

characteristics of the finished product. Written with the engineer,

contractor and distributor in mind, it is based on laboratory test

results and IPEX’s many years of field experience.

At IPEX, we have been extruding PVC conduit and molding

fittings since 1951. We formulate our own compounds,

maintain strict quality control during production, and offer one

of the most comprehensive lines of nonmetallic electrical

products throughout North America.

More important, our commitment to customers extends

beyond the sale. Quality control and thorough jobsite field

reports have earned IPEX a reputation for product quality and

service excellence.

Super Duct® . . . . . . . . . . . . . . . . . . . . . . . . .87

Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Engineering Data . . . . . . . . . . . . . . . . . . . . . . . . .89

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Telephone Duct . . . . . . . . . . . . . . . . . . . . . . . . . .94

Power & Communication Duct . . . . . . . . . . . . . . . .95

SceptaconTM Trenchless Raceway Systems . . .97

32 ADVANTAGES

Labor Savings

Compared to metal, PVC products reduce labor on a typical

installation by up to two-thirds. The reason?

PVC is easy to work with. It can also be cut and joined without

vises, cutters, threading equipment and reamers associated

with metal conduit.

Lightweight Conduit

Scepter rigid PVC conduit is one-half the weight of aluminum

and one-sixth the weight of steel. As a result, handling and

installation are easier and faster, reducing labor costs.

Easy Joining

Solvent cementing is all that is required, eliminating the need

for power-threading machines, pipe vises and cutting

equipment. A hacksaw or carpenter’s saw is the only

equipment required.

Strength

Scepter rigid PVC conduit offers both high impact and high

tensile strength, even in cold temperatures. They exceed all UL

and NEMA standards.

Rigid Conduit Sch. 40 UL Impact @ 73°F

Size (in.) (ft.lbs.)

1/2 50

3/4 80

1 100

1-1/4 120

1-1/2 150

2 190

2-1/2 210

3 – 6 220

APPLICATIONS

Engineers, electricians, contractors, specifiers and utilities have

realized for many years the advantages of PVC. Today, IPEX

electrical systems include Scepter®PVC conduit and fittings,

INEXO®ICF boxes, Kwikon®ENT fittings, SceptaConTM

trenchless raceway systems, SceptalightTM nonmetallic light

fixtures and Super Duct®power and communication ducts.

These brands are the number-one choice for power,

communication and data needs. Whether exposed, concealed in

walls, encased in concrete, or directly buried, IPEX electrical

products are preferred

For The Long Run

Only when you specify IPEX branded products by name are you

guaranteed our commitment to excellence.

Applications

Typical industrial/commercial and residential applications for

IPEX electrical systems include:

• Mines

• Steel mills

• Food processing plants

• Subways

• Bridges and tunnels

• Agricultural, dairy, hog, cattle,

chicken, etc.

• Marinas

• Sewage treatment plants

• Pulp & paper industries

• Street and highway lighting

• Car washes

•Parking garages

• Residential applications

• Fish plants

• Water treatment plants

• Airports

• Utilities

• Cable

• Communications

54 ADVANTAGES

Fire Resistant

PVC is a self-extinguishing material and will not support

combustion. It will not drip or run when exposed to fire.

Samples taken from an actual fire show the outer surface of

the conduit was blistered and charred.

The interior of the conduit, however, was unaffected.

Additionally, the undamaged conductors were then removed

and reinstalled in new conduit.

Fire-resistant characteristics per CAN ULC S102.2 are as follows:

Suitable for Direct Burial

PVC is suitable for direct burial and

requires no extra protection when installed

in accordance with local inspection

authority guidelines. The usual care

regarding trenches and backfilling should

be respected.

One-Source Specification

IPEX electrical systems offer a full range

of PVC fittings and accessories. As a

result, one-material specifying is possible.

Quality Control

In addition to our rigorous quality control

testing, IPEX product carries third-party

certification by UL and CSA.

IPEX

Compound Flame

Spread Smoke

Developed Fuel

Contribution

1/8" thickness 10 – 20 225 – 270 0

3/4" thickness 10 – 20 300 – 390 0

Easy Wire Pulls

PVC’s exceptionally smooth interior surface greatly reduces the

amount of friction while pulling conductors/wires through long

runs, even with 90° bends. A large pull-rope and wire-pulling

compound should be used when pulling all conductors and wires.

Noncorroding

PVC is immune to damage from naturally

corrosive soil conditions, as well as

electro-chemical and galvanic corrosion.

This ensures lower maintenance costs and

longer performance

For The Long Run.

Nonconducting

IPEX electrical systems are nonsparking

and non-conducting, thereby eliminating

the most dangerous ‘second point of

contact’ and ‘phase to ground’ faults. The

use of a separate grounding conductor

provides complete and positive grounding

for the whole system.

Long Life

Scepter rigid PVC conduit and fittings

retain their original properties after years

of exposure to direct sunlight, heat and

weather. In addition, resistance to fungi,

bacterial action, rodents, termites and

corrosive agents ensures a long, trouble-

free life for PVC conduit installed indoors

or outdoors.

Chemical Resistance

One of the greatest benefits of PVC is its

excellent chemical resistance. It resists

attack by acids, alkalies, salt solutions

and many other types of chemicals.

For more information on PVC and

chemical resistance, refer to the IPEX

Chemical Resistance Guide.

Concrete Tight

Scepter rigid PVC conduit systems are designed and engineered to

be concrete tight in all weather conditions.

ADVANTAGES

SCEPTER RIGID

PVC CONDUIT

SCEPTER RIGID PVC SCH. 40 & 80 CONDUIT

This section provides comprehensive information and

guidelines for the design and installation of PVC Schedule 40

& 80 conduit and fittings. Always consult the authority having

jurisdiction for specific installation procedures.

UL Listed-UL651

Sunlight Resistant

Rated for use with 90°C

conductors

NEMA TC-2

Corps. of Engineers Spec.

CE 303:01

Military Spec,Federal Spec.

WC 09A

Bookmark Our Website

www.ipexamerica.com

OUR ELECTRICAL CATALOG

& SCEPTER ELECTRICAL

CATALOG INCLUDE MORE

INFORMATION ON:

•Conduit & Fittings •Duct

•Light Fixtures •Trenchless Raceways

•ENT Tubing & Fittings •and much more ...

PRODUCT INFO,

TECHNICAL

DOCUMENTS,

ONLINE TRAINING

& MUCH MORE ...

available at www.ipexamerica.com

SCEPTER RIGID

PVC CONDUIT

SCEPTER RIGID

PVC CONDUIT

INSTALLATION

Solvent Cementing

After cutting Scepter rigid PVC conduit,

sharp edges or burrs from inside the

conduit should be removed with a knife.

Thoroughly clean the end of the pipe

and inside the fitting with a pipe

cleaner. Apply a generous amount of

solvent cement to both surfaces; slide

together and give a quarter turn to

ensure the solvent is spread evenly on

the material. Hold together for a few

seconds until the joint is made.

Usually the solvent-cemented joint will

be strong enough to install immediately.

However, in climates with low

temperatures or areas with high humidity, extra time may be

required before moving the pipe for permanent installation.

Solvent cemented joints appear to “set up” instantly, but will

take 24 hours to cure properly. After this time, the solvent-

cemented joint has completely cured and is waterproof. For

extreme cold weather installations, a PVC primer is

recommended. IPEX cements and primers are available in

quarter-pint, half-pint, pint, quart and gallon containers.

Bending

PVC is a thermoplastic material that,

when heated, becomes soft and pliable.

As a result, its shape can be altered.

A flameless heat source is

recommended to heat the pipe. AN

OPEN FLAME SHOULD NOT BE USED.

Either an electric unit or an infra-red

propane unit is recommended.

The necessary temperature for bending

pipe is 260°F. The pipe must be heated

evenly over an area approximately ten

times the diameter of the pipe before

any attempt at bending is made.

Bending the pipe when it has not been

thoroughly heated will cause the pipe to

“kink.” With proper care and a little

practice, the bend will form easily.

Cooling the pipe with cold air or water

will cause “spring back.” Allow a few

extra degrees of overbending to

compensate. Maximum bending radius

shall be six times the internal diameter

according to NEC.

Support

Due to PVC’s light weight,

support spacing is different

than that used with metal

conduits. Supporting straps should

NOT be firmly tightened, to allow for

linear movement. The maximum

allowable support spacing, as per National Electrical

Code Article 352.30 (NEC), is as follows:

Support Spacing For Schedule 40 & 80

Conduit

Maximum Operating

Temperature

The National Electrical Code (NEC)

permits the use of rigid PVC pipe and

fittings in areas where ambient

temperatures do not exceed 122°F.

Cutting

Scepter rigid PVC conduit can be easily

cut on the jobsite by using a hacksaw,

carpenter’s saw or PVC conduit cutters.

For larger sizes of conduit, the use of a

miter box is also recommended to ensure

a square cut.

INSTALLATION

Nominal Conduit Diameter Maximum Support Spacing

inches feet

1/2 3

3/4 3

1 3

1-1/4 5

1-1/2 5

2 5

2-1/2 6

3 6

3-1/2 7

4 7

5 7

6 8

1110

SCEPTER RIGID

PVC CONDUIT

SCEPTER RIGID

PVC CONDUIT

EXPANSION & CONTRACTION

Number of Expansion Joints Required

Use the following equation to determine the number of expansion

joints needed for a Scepter Rigid PVC Conduit installation:

Number of joints =

E = Expansion joint travel length (4") or (8") depending on diameter.

Always round up to the next whole number.

Setting the Piston Opening

The expansion joint must be installed to allow for expansion and

contraction of the conduit run. On a cold day, if an expansion joint is

installed completely closed with the piston bottomed, there is no room

for expansion when the conduit is warmed. If it is installed open to the

maximum on a hot day, the expansion joint will pull apart when cooled.

The correct piston opening for any installation condition can be easily

determined using the formula below:

Piston setting =

Compressed length + max. temp. – installation temp. x E

max. temp. – min. temp.

Formula can be used for both metric and imperial measurements.

total expansion (in)

Size (inches) Compressed Length (inches) Travel (inches)

1/2 8.00 4

3/4 8.00 4

18.50 4

1-1/4 9.00 4

1-1/2 9.00 4

29.25 4

2-1/2 9.25 4

314.25 8

3-1/2 14.25 8

414.25 8

514.25 8

614.25 8

()

EXPANSION & CONTRACTION

Using Expansion Joints

It’s just as important to know when to

use an expansion joint as it is to know

how to install it correctly. Expansion

joints are required when the

temperature change is greater than

25°F. Scepter rigid PVC conduit has a

coefficient of linear expansion of 3.6 x

10-4 in./ft./°F. Generally, a 100 ft. run

of PVC conduit will undergo a change in

length of 3.6 inches for every 100°F

temperature change.

For conduit installed indoors, the range of expansion and

contraction can be calculated using the maximum air

temperature plus the heat contributed by the conductors inside

the conduit and minimum air temperature expected. Expansion

joints are not required indoors unless there are widely varying

temperatures such as the attic of a building.

Conduit installed outdoors, exposed to direct sunlight, will be

considerably hotter than the air temperature. As a guideline in

this case, add 27°F to the temperature change. Expansion

joints should be installed to allow for the anticipated

temperature change.

Expansion Formula

By using the following formula and the chart below, the total

expected expansion in a run can be easily determined:

Total Expansion (in.) = length of run (ft.)

x temperature change (°F) x 0.00036

0 1 2 3 4 5

120

110

100

PVC PIPE

As a general rule

for every

temperature

change of 10ºF,

PVC pipe will

expand or contract

3/8" per 100'

TEMPERATURE CHANGE IN ºF

LENGTH VARIATION in/100 ft OF PIPE

PVC PIPE LENGTH VARIATION

DUE TO TEMPERATURE CHANGE (ºF)

Coefficient = 3.6 x 10-4 in/ft/ºF

1312

SCEPTER RIGID

PVC CONDUIT

SCEPTER RIGID

PVC CONDUIT

EXPANSION & CONTRACTION

Figure 1

Figure 2

Figure 3

Figure 4

EXPANSION & CONTRACTION

Location of Expansion Joints

Proper functioning of an expansion joint depends on three

procedures:

1. The correct placement of the expansion joint.

2. The proper installation of Scepter rigid PVC conduit and the

expansion joint.

3. The proper placement and fastening of support straps.

One Expansion Joint

Figure 1

If only one expansion joint is needed between two boxes, the

barrel of the joint should be rigidly fastened close to the

first box. Scepter rigid PVC conduit is then loosely supported

with straps, allowing the conduit to move freely as it

expands and contracts.

Two Expansion

Joints

Figure 2

If two expansion joints

are needed, the joints are

firmly fastened back to back

at the center of the run.

Scepter rigid PVC conduit is

loosely supported with straps, allowing the

conduit to move freely as it expands and

contracts.

Two Expansion Joints (Alternative)

Figure 3

Alternatively, the center of the run and the two expansion joints

(located at the boxes) should be rigidly fastened. All other

support straps should be loosely fastened.

Three or More Expansion Joints

Figure 4

If more than two joints are needed in a very long run, they

should be put in a series, one after the other. Each barrel must

be rigidly fastened while conduit is loosely supported with

straps allowing conduit to move freely as it expands and

contracts. When installed in a series, each section acts

independently of the other. Spacing of conduit supports must

be in accordance with the NEC Article 352.30.

1514

SCEPTER RIGID

PVC CONDUIT

SCEPTER RIGID

PVC CONDUIT

Weight Comparison of Scepter Rigid PVC

Conduit (lbs./100 ft.)

CONDUIT DIMENSIONS

Scepter PVC Schedule 40 in 10' or 20' Lengths

Scepter PVC Schedule 40 conduit is listed with Underwriters

Laboratories Inc. Article 352 of the National Electrical Code

outlines the correct installation procedures.

UL Listed-UL651

Sunlight Resistant

Rated for use with 90°C

conductors

NEMA TC-2

Corps. of Engineers Spec.

CE 303:01

Military Spec, Federal Spec.

WC 1094A

Nominal

Size

(in)

10'

Product

Code

20'

Product

Code Code

OD (in) ID (in) Min.

Wall

(in)

Weight

lbs/100

Standard

10'

ft/crate

1/2 032405 032406 0.840 0.622 0.109 15 6,000

3/4 032407 032408 1.050 0.824 0.113 21 4,400

1032410 032411 1.315 1.049 0.133 31 3,600

1-1/4 032412 032414 1.660 1.380 0.140 42 3,300

1-1/2 032415 032416 1.900 1.610 0.145 53 2,250

2032420 032421 2.375 2.067 0.154 71 1,400

2-1/2 032425 032426 2.875 2.469 0.203 112 930

3032430 032431 3.500 3.068 0.216 166 880

3-1/2 032435 032436 4.000 3.548 0.226 200 630

4032440 032441 4.500 4.026 0.237 236 570

5032450 032451 5.563 5.047 0.258 321 380

6032460 032461 6.625 6.065 0.280 417 260

Nominal Size (in) Schedule 40 PVC Aluminum Rigid Steel

1/2 15 28 79

3/4 21 36 105

131 53 153

1-1/4 42 70 201

1-1/2 53 86 249

271 116 334

2-1/2 112 183 527

3166 239 690

3-1/2 200 288 831

4236 340 982

5321 465 1,334

6417 613 1,771

EXPANSION & CONTRACTION

Common Mistakes

The most common mistakes are neglecting to use

expansion joints or not using enough expansion joints. It

is more cost effective to use more expansion joints than

needed, rather than too few. It is difficult to correct the

problem after conductors are installed and in service.

Another common mistake is to tighten the support straps

too firmly. This will not allow for the proper expansion and

contraction of rigid PVC conduit.

1. Solvent cement the PVC conduit into the conduit hub of

the OPEJ and firmly secure the PVC conduit on the

solvent cement side of the OPEJ using IPEX pipe straps.

2. Set the expansion fitting by marking a line 11/2" from the

end of the conduit to be inserted and insert the conduit

into the OPEJ to this mark.

3. Secure and support the conduit raceway using IPEX

pipe straps.

Installation of the One Piece

Expansion Joint (OPEJ)

Installation of Expansion Joints

Installation recommendations:

• Expansion joints should be mounted so the piston can

travel in a straight line in the barrel. If the alignment is not

straight, the piston will bind, preventing the joint from

working correctly.

• The expansion joint barrel should be clamped tight, but the

conduit mounted loose enough in its hangers to allow for

movement as it expands and contracts.

• Scepter nonmetallic straps are correctly sized and designed

for proper support, and must be used to secure the conduit.

• When expansion joints are used in a vertical position, the

piston should be in a downward position so dirt cannot

deposit between the barrel and piston at the muzzle of the

expansion joints.

WARNING:

SCEPTER RIGID

PVC CONDUIT

SCEPTER RIGID

PVC CONDUIT

CONDUIT DIMENSIONS

Scepter Schedule 80 Heavy Wall in 10' or

20' Lengths

Scepter PVC Heavy Wall conduit is for use above and below

ground where it may be subject to severe physical damage, such

as pole risers, bridge crossings and other similar applications.

UL Listed-UL651

Sunlight Resistant

Rated for use with 90°C

conductors

NEMA TC2

Corps. of Engineers Spec.

CE 303:01

Military Spec, Federal Spec.

WC 1094A

Nominal

Size (in) 10'

Product

Code

20'

Product

Code OD (in) ID (in) Min.

Wall

(in)

Weight

lbs/100

Standard

10'

ft/crate

1/2 032505 032506 0.840 0.546 0.147 21 6,000

3/4 032507 032508 1.050 0.724 0.154 28 4,400

1032510 032511 1.315 0.957 0.179 41 3,600

1-1/4 032512 032514 1.660 1.278 0.191 57 3,300

1-1/2 032515 032516 1.900 1.500 0.200 70 2,250

2032520 032521 2.375 1.939 0.218 96 1,400

2-1/2 032525 032526 2.875 2.323 0.276 146 930

3032530 032531 3.500 2.900 0.300 195 880

4032540 032541 4.500 3.826 0.337 286 570

5032550 032551 5.563 4.813 0.375 397 380

6032560 032561 6.625 5.761 0.432 546 260

Weight Comparison of Scepter Rigid PVC

Conduit (lbs./100 ft.)

Nominal Size (in) Schedule 80 PVC Aluminum Rigid Steel

1/2 21 28 79

3/4 28 36 105

141 53 153

1 1/4 57 70 201

1 1/2 70 86 249

296 116 334

2 1/2 146 183 527

3195 239 690

4286 340 982

5397 466 1,334

6546 613 1,771

CONDUIT DIMENSIONS

PROPERTIES UNIT VALUE ASTM

TEST

METHOD

ELECTRICAL

Dielectric Strength volts/mil 1215 D149

Dielectric Constant 60 cps at 30ºC 3.55 D150

1000 cps at

30ºC 3.22 D150

Power Factor 60 cps at 30ºC 4.04 D150

1000 cps at

30ºC 4.71 D150

PHYSICAL

Specific Gravity 13.5 D792

Hardness Durometer D 78 D676

Izod Impact Strength

@ 73ºF (23ºC) ft.lb/in. notch 15.0 D256

Tensile Strength

@ 73ºF (23ºC) psi 6000 D638

Compressive Strength psi 8600 D695

Flexural Strength psi 11500 D790

THERMAL

Coefficient of Thermal

Conductivity BTU/sec/in2/ºF/in 0.11 C177

Coefficient of Linear

Expansion per ºF x 10-5 5.5 D696

Heat Distortion

Temperature at 264 psi ºF 158 D648

OTHERS

Flammability self-

extinguishing D635

Water Absorption in 30

days %0.6

Color charcoal grey

Light Transmission opaque D791

PHYSICAL PROPERTIES OF PVC TYPE II

All technical data is believed to be accurate and is presented soley

for information and guidance.

SCEPTER CONDUIT

FITTINGS

PVC CONDUIT FITTINGS

Industry leaders specify Scepter PVC conduit fittings by

name. For years, Scepter PVC fittings have set the standard

for quality and value-added features not normally available

from other suppliers. Features such as our threaded brass

inserts, brass screws and superior PVC gasketing system

make a real difference.

It’s our Commitment to Excellence.

UL Listed

UL514B - UL514C NEMA TC-2, 3

UL651

C22.2 No. 85

NOTES

____________________

2120

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

Long Line Couplings

Size (inches) Part Number Product Code A (inches)

1-1/2 LLC30 077192 3.175

2LLC35 077193 3.675

2-1/2 LLC40 077194 4.280

3LLC45 077195 4.800

4 LLC55 077196 6.200

5LLC60 077197 8.220

6 LLC65 077198 8.220

Size (inches) Part Number Product Code L (inches)

2 x 1-1/4 SW3525 077320 4

3 x 2 SW4535 077321 6

3 x 2-1/2 SW4540 077335 6.5

4 x 2 SW5535 077322 7

4 x 2-1/2 SW5540 069282 -

4 x 3 SW5545 077333 7

(Socket x Socket) Other sizes available upon request.

Fabricated Swedge Reducer Couplings

Repair Coupling Sleeve

Size

(inches) Part

Number Product

Code A (inches) D Min

(inches) D Max

(inches)

1-1/2 REC30 077292 2.300 1.912 1.924

2REC35 077293 2.405 2.367 2.399

2-1/2 REC40 077294 3.450 2.883 2.897

3REC45 077295 3.600 3.507 3.523

4 REC55 077296 3.920 4.506 4.524

5REC60 077297 4.275 5.583 5.603

6 REC65 077298 4.620 6.647 6.669

FITTINGS

Couplings

Size (in) Part

Number Product

Code A (in) B (in) C (in)

1/2 EC10 068000 1.060 0.844 1.400

3/4 EC15 068001 1.310 1.056 1.640

1EC20 077003 1.590 1.315 2.031

1-1/4 EC25 077004 2.000 1.660 2.156

1-1/2 EC30 077005 2.230 1.900 2.281

2EC35 077006 2.720 2.375 2.406

2-1/2 EC40 077007 3.320 2.875 3.187

3EC45 077008 4.000 3.500 3.437

3-1/2 EC50 077009 4.500 4.000 3.625

4EC55 077010 5.000 4.500 3.750

5EC60 077011 6.120 5.563 4.187

6EC65 077012 7.370 6.625 4.562

5º couplings

Size (inches) Part Number Product Code L (inches)

25EC35 077100 4.0

2-1/2 5EC40 077101 5.5

35EC45 077103 6.0

3-1/2 5EC50 077102 7.0

45EC55 077104 7.0

55EC60 077105 7.5

65EC65 077106 11.0

2322

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

Reducer Bushings

Size (in) Part Number Product Code

3/4 x 1/2 1805 077300

1 x 1/2 1805-1 077301

1 x 3/4 1806 077302

1-1/4 x 3/4 1807-1 077303

1-1/4 x 1 1807 077304

1-1/2 x 1 1808-1 077305

1-1/2 x 1-1/4 1808 077306

2 x 1 1809-1 077313

2 x 1-1/4 1809 077307

2 x 1-1/2 1810 077308

2-1/2 x 2 1811 077309

3 x 2 1812-1 077310

3 x 2-1/2 1812 077311

4 x 2 1813-1 077319

4 x 3 1813 077312

4 x 3-1/2 1814 077317

*Additional sizes of reducer bushings are available upon request.

Threaded Reducer Bushings

Size (in) Part Number Product Code

3/4 x 1/2 1825 077314

1 x 1/2 1826 077315

1 x 3/4 1827 077316

Female Adapters

Note: All female adapters have NPT-tapered threads.

Size (in) Part

Number Product

Code A (in) B (in) C (in) D (in)

1/2 FA10 076544 0.620 1.080 0.800 1.725

1/2 FA10 077041 0.620 1.080 0.800 1.725

3/4 FA15 077042 0.820 1.300 0.800 1.900

1FA20 077043 1.065 1.590 1.000 2.300

1-1/4 FA25 077044 1.395 2.000 1.015 2.425

1-1/2 FA30 077045 1.575 2.230 1.050 2.440

2FA35 077046 2.050 2.720 1.075 2.550

2-1/2 FA40 077047 1.020 3.250 1.500 2.700

3FA45 077048 3.090 4.000 1.630 4.100

3-1/2 FA50 077049 3.540 4.500 1.800 3.895

4FA55 077050 4.025 5.000 1.755 4.210

5FA60 077051 5.035 6.120 2.065 5.240

6FA65 077052 6.045 7.370 2.065 5.235

Terminal Adapters

Size (in) Part

Number Product

Code A (in) B (in) C (in) D (in)

1/2 TA10 077021 0.700 0.591 0.750 1.550

3/4 TA15 077022 0.675 0.790 1.000 1.750

1TA20 077023 0.625 1.000 1.115 1.860

1-1/4 TA25 077024 0.640 1.311 1.300 2.125

1-1/2 TA30 077025 0.725 1.530 1.425 2.250

2TA35 077026 0.800 1.970 1.150 2.100

2-1/2 TA40 077027 0.800 2.346 1.900 2.930

3TA45 077028 0.815 2.915 2.000 3.055

3-1/2 TA50 077029 1.000 3.385 1.715 3.055

4TA55 077030 0.815 3.850 1.990 3.215

5TA60 077031 1.725 5.015 2.000 5.985

6TA65 077032 1.875 6.025 2.130 6.500

Note: 1/2" to 1 1/4" TA - tapered thread

1 1/2" to 6" TA - non-tapered thread

FITTINGS

2524

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

Poly Plugs

Size (in) Part Number Product Code

2 - 2-1/2 PP3540 077433

3 - 3-1/2 PP4550 077434

4PP55 077435

5PP60 077436

6PP65 077437

“O” Ring Expansion Joints

Size (in) Part Number Product Code A (in) B (in)

1/2 EJ10 077381 12.00 8.00

3/4 EJ15 077382 12.00 8.00

1EJ20 077383 12.50 8.50

1-1/4 EJ25 077384 13.00 9.00

1-1/2 EJ30 077385 13.00 9.00

2EJ35 077386 13.25 9.25

2-1/2 EJ40 077387 13.25 9.25

3EJ45 077388 22.25 14.25

3-1/2 EJ50 077389 22.25 14.25

4EJ55 077390 22.25 14.25

5EJ60 077391 22.25 14.25

6EJ65 077392 22.25 14.25

max. min.

FITTINGS

End Bells

Size (in) Part Number Product Code

1/2 EB-10 077406

3/4 EB-15 077085

1EB-20 077323

1-1/4 EB-25 077324

1-1/2 EB-30 077325

2EB-35 077326

2-1/2 EB-40 077327

3EB-45 077328

3-1/2 EB-50 077329

4EB-55 077330

5EB-60 077331

6EB-65 077332

End Caps

Size (in) Part Number Product Code

1/2 CAP10 077421

3/4 CAP15 077422

1CAP20 077423

1-1/4 CAP25 077424

1-1/2 CAP30 077425

2CAP35 077426

2-1/2 CAP40 077427

3CAP45 077428

3-1/2 CAP50 077429

4CAP55 077430

5CAP60 077431

6CAP65 077432

2726

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

90° Elbows

Schedule 40

Standard Radius

FITTINGS

One Piece Expansion Joints

Size (in) Part Number Product Code

1/2 OPEJ10 077018

3/4 OPEJ15 077019

1OPEJ20 077053

1-1/4 OPEJ25 077054

1-1/2 OPEJ30 077061

2OPEJ35 077063

T.A. Special Expansion Joint

Size (in) Part Number Product Code

2-1/2 EJ40TA 077398

Expansion and Deflection Fitting Assemblies

Size (in) Part Number Description Product Code

2* SE-J-35 Complete Assembly 077889

3* SE-J-45 Complete Assembly 077890

4* SE-J-55 Complete Assembly 077891

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 EE1090 068580 0.840 1.500 4.00

3/4 EE1590 068581 1.050 1.500 4.50

1EE2090 068582 1.315 1.875 5.75

1-1/4 EE2590 068583 1.660 2.000 7.25

1-1/2 EE3090 068584 1.900 2.000 8.25

2EE3590 068585 2.375 2.000 9.50

2-1/2 EE4090 068586 2.875 3.000 10.50

3EE4590 068587 3.500 3.125 13.00

3-1/2 EE5090 068588 4.000 3.250 15.00

4EE5590 068589 4.500 3.375 16.00

5EE6090 068591 5.563 3.625 24.00

6EE6590 068592 6.625 3.750 30.00

45° Elbows

Schedule 40

Standard Radius

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 EE1045 068600 0.840 1.500 4.00

3/4 EE1545 068601 1.050 1.500 4.50

1EE2045 068602 1.315 1.875 5.75

1-1/4 EE2545 068603 1.660 2.000 7.25

1-1/2 EE3045 068604 1.900 2.000 8.25

2EE3545 068605 2.375 2.000 9.50

2-1/2 EE4045 068606 2.875 3.000 10.50

3EE4545 068607 3.500 3.125 13.00

3-1/2 EE5045 068608 4.000 3.250 15.00

4EE5545 068609 4.500 3.375 16.00

5EE6045 068611 5.563 3.625 24.00

6EE6545 068612 6.625 3.750 30.00

* Not Certified

28 FITTINGS 29

FITTINGS

30° Elbows

Schedule 40

Standard Radius

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 EE1030 068620 0.840 1.500 4.00

3/4 EE1530 068621 1.050 1.500 4.50

1EE2030 068622 1.315 1.875 5.75

1-1/4 EE2530 068623 1.660 2.000 7.25

1-1/2 EE3030 068624 1.900 2.000 8.25

2EE3530 068625 2.375 2.000 9.50

2-1/2 EE4030 068626 2.750 3.000 10.50

3EE4530 068627 3.500 3.125 13.00

3-1/2 EE5030 068628 4.000 3.250 15.00

4EE5530 068629 4.500 3.375 16.00

5EE6030 068631 5.563 3.625 24.00

6EE6530 068632 6.625 3.750 30.00

22-1/2° Elbows

Schedule 40

Standard Radius

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1-1/2 EE1522 078580 1.900 2.000 8.25

2EE2022 078581 2.375 2.000 9.50

2-1/2 EE2522 078582 2.875 3.000 10.50

3EE3022 078583 3.500 3.125 13.00

3-1/2 EE3522 078584 4.000 3.250 15.00

4EE4022 078585 4.500 3.375 16.00

5EE5022 078586 5.563 3.625 24.00

6EE6022 078587 6.625 3.750 30.00

90° Elbows

Schedule 40

Integral Bell End

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 EE1090B 068420 0.840 1.500 4.00

3/4 EE1590B 068421 1.050 1.500 4.50

1EE2090B 068422 1.315 1.875 5.75

1-1/4 EE2590B 068423 1.660 2.000 7.25

1-1/2 EE3090B 068424 1.900 2.000 8.25

2EE3590B 068425 2.375 2.000 9.50

2-1/2 EE4090B 068426 2.875 3.000 10.50

3EE4590B 068427 3.500 3.125 13.00

3-1/2 EE5090B 068428 4.000 3.250 15.00

4EE5590B 068429 4.500 3.375 16.00

5EE6090B 068430 5.563 3.625 24.00

6EE6590B 068431 6.625 3.750 30.00

45° Elbows

Schedule 40

Integral Bell End

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 EE1045B 068561 0.840 1.500 4.00

3/4 EE1545B 068562 1.050 1.500 4.50

1EE2045B 068563 1.315 1.875 5.75

1-1/4 EE2545B 068564 1.660 2.000 7.25

1-1/2 EE3045B 068565 1.900 2.000 8.25

2EE3545B 068566 2.375 2.000 9.50

2-1/2 EE4045B 068567 2.875 3.000 10.50

3EE4545B 068568 3.500 3.125 13.00

3-1/2 EE5045B 068569 4.000 3.250 15.00

4EE5545B 068570 4.500 3.375 16.00

5EE6045B 068571 5.563 3.625 24.00

6EE6545B 068572 6.625 3.750 30.00

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

90° Elbows

Schedule 80

Standard Radius

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 80EE1090 068690 0.840 1.500 4.00

3/4 80EE1590 068691 1.050 1.500 4.50

180EE2090 068692 1.315 1.875 5.75

1-1/4 80EE2590 068693 1.660 2.000 7.25

1-1/2 80EE3090 068694 1.900 2.000 8.25

280EE3590 068695 2.375 2.000 9.50

2-1/2 80EE4090 068696 2.875 3.000 10.50

380EE4590 068697 3.500 3.125 13.00

480EE5590 068698 4.500 3.375 16.00

580EE6090 068699 5.563 3.625 24.00

680EE6590 068700 6.625 3.750 30.00

30° Elbows

Schedule 80

Standard Radius

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 80EE1030 068550 0.840 1.500 4.00

3/4 80EE1530 068551 1.050 1.500 4.50

180EE2030 068552 1.315 1.875 5.75

1-1/4 80EE2530 068553 1.660 2.000 7.25

1-1/2 80EE3030 068554 1.900 2.000 8.25

280EE3530 068555 2.375 2.000 9.50

2-1/2 80EE4030 068556 2.750 3.000 10.50

380EE4530 068557 3.500 3.125 13.00

480EE5530 068558 4.500 3.375 16.00

580EE6030 068559 5.563 3.625 24.00

680EE6530 068560 6.625 3.750 30.00

45° Elbows

Schedule 80

Standard Radius

Size

inches Part

Number Product

Code D

inches T

inches R

inches

1/2 80EE1045 068810 0.840 1.500 4.00

3/4 80EE1545 068811 1.050 1.500 4.50

180EE2045 068812 1.315 1.875 5.75

1-1/4 80EE2545 068813 1.660 2.000 7.25

1-1/2 80EE3045 068814 1.900 2.000 8.25

280EE3545 068815 2.375 2.000 9.50

2-1/2 80EE4045 068816 2.875 3.000 10.50

380EE4545 068817 3.500 3.125 13.00

480EE5545 068818 4.500 3.375 16.00

580EE6045 068819 5.563 3.625 24.00

680EE6545 068820 6.625 3.750 30.00

30 FITTINGS 31

FITTINGS

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

32 FITTINGS 33

FITTINGS

Schedule 40 Special Radius (Plain End)

Size

Inches Degree Bend 18" Radius

Product Code 24" Radius

Product Code 30" Radius

Product Code 36" Radius

Product Code 48" Radius

Product Code 60" Radius

Product Code

90 068702 068722 068742 068762 068782 #

45 068802 068822 068842 068862 068882 #

30 068902 068922 068942 068962 068982 #

22-1/2 078853 078035 ####

1-1/4

90 068703 068723 068743 068763 068783 #

45 068803 068823 068843 068863 068883 #

30 068903 068923 068943 068963 068983 #

22-1/2 068513 078667 # # # #

1-1/2

90 068704 068724 068744 068764 068784 #

45 068804 068824 068844 068864 068884 #

30 068904 068924 068944 068964 068984 #

22-1/2 068523 078668 ####

90 068705 068725 068745 068765 068785 068113

45 068805 068825 068845 068865 068885 #

30 068905 068925 068945 068965 068985 #

22-1/2 068514 068547 #068515 # #

2-1/2

90 068706 068726 068746 068766 068786 #

45 068806 068826 068846 068866 068886 #

30 068906 068926 068946 068966 068986 #

22-1/2 068524 ####

90 068707 068727 068747 068767 068787 068114

45 068807 068827 068847 068867 068887 #

30 068907 068927 068947 068967 068987 #

22-1/2 068516 068525 #068517 068526 #

3-1/2

90 Use Standard

Schedule 40

Elbow

068728 068748 068768 068788 #

45 068828 068848 068868 068888 #

30 068928 068948 068968 068988 #

22-1/2 068130 ####

90 Use Standard

Schedule 40

Elbow

068729 068749 068769 068789 068112

45 068829 068849 068869 068889 078011

30 068929 068949 068969 068989 #

22-1/2 068518 068519 068520 068521 068111

90 Use Standard

Schedule 40 Elbow

068751 068771 068791 068115

45 068851 068871 068891 078615

30 068951 068971 068991 068132

22-1/2 068529 068522 # #

90 Use Standard

Schedule 40 Elbow

068772 068792 #

45 068872 068892 078220

30 068972 068992 #

22-1/2 068528 068527 078221

90 - - - - 068052 #

45 - - - - 068082 #

22-1/2 - - - - 068081 #

11-1/4 - - - - 068080 #

Note: # indicates available on request. Material is

non-cancelable and non-returnable.Note: Larger Radius Elbows are available on request

and are non-cancelable and non-returnable.

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

3534 FITTINGS

Schedule 40 Special Radius (Belled One End)

Size

Inches Degree Bend 18" Radius

Product Code 24" Radius

Product Code 36" Radius

Product Code 48" Radius

Product Code

290 068014 068030 068054 068078

45 068015 068033 068055 068079

2-1/2 90 068016 068034 068056 068086

45 068017 068035 068057 068090

390 068018 068036 068058 068091

45 068019 068037 068059 068092

3-1/2 90 Use Std. Sch. 40

Radius (15") 068038 068070 068093

45 068039 068071 068094

490 Use Std. Sch. 40

Radius (16") 068050 068072 068095

45 068053 068073 068096

590 Use Std. Sch. 40

Radius (24") Use Std. Sch. 40

Radius (24") 068074 068097

45 068075 068098

690 Use Std. Sch. 40

Radius (30") Use Std. Sch. 40

Radius (30") 068076 068099

45 068077 068106

Schedule 80 Special Radius (Belled One End)

Size

Inches Degree

Bend 18" Radius

Product Code 24" Radius

Product Code 30" Radius

Product Code 36" Radius

Product Code 48" Radius

Product Code

190 068710 # # # 068541

45 # # # # #

1-1/4 90 068711 068735 # # 068542

45 # # # # #

1-1/2 90 068712 # # 068545 068543

45 # # # # #

290 068713 068736 #068775 068544

45 #068530 #068534 #

2-1/2 90 068714 068737 # 068776 068548

45 # 068531 # 068535 #

390 068715 068738 #068777 068794

45 #068532 #068536 #

490 068716 068739 068549 068778 068795

45 # 068533 # 068537 #

590 Use Standard Schedule 80 Radius (24") #068779 068796

45 #068538 068546

690 068540 068797

45 068539 #

Note: # indicates available on request. Material is non-

cancelable and non-returnable.Note: 30º and 22½º Elbows are available on request.

Note: Larger Radius Elbows are available on request and

are non-cancelable and non-returnable.

FITTINGS

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

3736

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

Conduit Clamps and Spacers

Size (in) Part Number Product Code

1/2 CCS10 077794

3/4 CCS15 077796

1CCS20 077797

1-1/4 CCS25 077798

1-1/2 CCS30 077799

2CCS35 077800

Strut Base CCS-B 077343

CCS-B are sold individually, two pieces are required to create one

base unit.

PVC Coated Steel, 1 Hole

Size (in) Part Number Product Code

1/2 CS10-1 077831

3/4 CS15-1 077832

1CS20-1 077833

1-1/4 CS25-1 077834

1-1/2 CS30-1 077835

2CS35-1 077836

2-1/2 CS40-1 077837

3CS45-1 077838

3-1/2 CS50-1 077839

4CS55-1 077840

FITTINGS

PVC Coated Steel, 2 Hole

Size (in) Part Number Product Code

2CS35 077818

2-1/2 CS40 077819

3CS45 077820

3-1/2 CS50 077821

4CS55 077822

5CS60 077824

6CS65 077823

Pipe Straps PE, 2 Hole

Size (in) Part Number Product Code

2-1/2 PS40 077262

3PS45 077263

4PS55 077264

Pipe Straps PVC, 2 Hole

Size (in) Part Number Product Code

1/2 PS10 077811

3/4 PS15 077812

1PS20 077813

1-1/4 PS25 077814

1-1/2 PS30 077815

2PS35 077816

3938

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

* Note: All access fittings are UL listed for wet locations.

Supplied with threaded brass inserts, brass screws and PVC gasketing.

Stainless steel screws are available upon request.

Access Fittings* Type LL

Size (in) Part Number Product Code

1/2 SLL10S 077521

3/4 SLL20S 077522

1SLL30S 077523

1-1/4 SLL40S 077524

1-1/2 SLL50S 077525

2SLL60S 077526

2-1/2 SLL70S 077527

3SLL80S 077528

3-1/2 SLL90S 077530

4SLL100S 077529

Access Fittings* Type C

Size (in) Part Number Product Code

1/2 SC10S 077501

3/4 SC20S 077502

1SC30S 077503

1-1/4 SC40S 077504

1-1/2 SC50S 077505

2SC60S 077506

2-1/2 SC70S 077507

3SC80S 077508

3-1/2 SC90S 077510

4SC100S 077509

FITTINGS

Access Fittings* Type LB

Size (in) Part Number Product Code

1/2 SLB10S 077541

3/4 SLB20S 077542

1SLB30S 077543

1-1/4 SLB40S 077544

1-1/2 SLB50S 077545

2SLB60S 077546

2-1/2 SLB70S 077547

3SLB80S 077488

3-1/2 SLB90S 077549

4SLB100S 077550

Access Fittings* Type LR

Size (in) Part Number Product Code

1/2 SLR10S 077481

3/4 SLR20S 077482

1SLR30S 077483

1-1/4 SLR40S 077484

1-1/2 SLR50S 077485

2SLR60S 077486

2-1/2 SLR70S 077480

3SLR80S 077488

3-1/2 SLR90S 077487

4SLR100S 077489

* Note: All access fittings are UL listed for wet locations.

Supplied with threaded brass inserts, brass screws and PVC gasketing.

Stainless steel screws are available upon request.

4140

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

* Notes: All access fittings are UL listed for wet locations.

Supplied with threaded brass inserts, brass screws and PVC gasketing.

Stainless steel screws are available upon request.

Access Fittings* Type TB

Size (in) Part Number Product Code

1/2 STB10S 077451

3/4 STB20S 077452

1STB30S 077453

1-1/4 STB40S 077454

1-1/2 STB50S 077455

2STB60S 077456

Access Fitting Dimensions*

Size (in) A (in) B (in) C (in) D (in) E (in) F (in)

1/2 5.606 0.639 1.268 1.100 0.840 4.337

3/4 5.606 0.810 1.536 1.325 1.050 5.395

16.500 0.910 1.700 1.600 1.335 6.250

1-1/4 7.900 1.050 2.300 2.000 1.100 7.625

1-1/2 8.500 1.125 2.675 2.250 1.900 8.250

210.875 1.160 3.188 2.820 2.375 10.531

2-1/2 14.600 1.750 4.500 3.950 2.870 13.630

314.600 1.900 4.500 3.950 3.510 13.630

3-1/2 17.040 2.125 5.536 5.000 4.000 16.000

417.040 2.125 5.536 5.000 4.530 16.000

Size (in) G (in) H (in) I (in) J (in) K (in) L (in)

1/2 4.095 1.297 2.487 2.280 1.005 0.750

3/4 4.095 1.297 2.487 2.803 1.005 0.810

14.750 1.500 2.075 3.250 1.125 1.115

1-1/4 5.750 1.750 3.575 3.950 1.562 1.300

1-1/2 6.500 1.750 3.938 4.250 1.656 1.425

28.156 2.344 4.535 5.438 1.968 1.160

2-1/2 9.825 3.805 6.240 7.300 2.610 -

310.897 2.733 6.240 7.300 2.610 -

3-1/2 11.465 4.535 7.500 8.535 2.975 -

411.465 4.535 7.500 8.535 2.975 -

Not UL listed.

FITTINGS

Access Fittings* Type T

Size (in) Part Number Product Code

1/2 ST10S 077461

3/4 ST20S 077462

1ST30S 077463

1-1/4 ST40S 077464

1-1/2 ST50S 077465

2ST60S 077466

2-1/2 ST70S 077467

3ST80S 077468

3-1/2 ST90S 077471

4ST100S 077572

Access Fittings* Type E

Size (in) Part Number Product Code

1/2 SE10S 077561

3/4 SE20S 077562

1SE30S 077563

1-1/4 SE40S 077564

1-1/2 SE50S 077565

2SE60S 077566

2-1/2 SE70S 077567

3SE80S 077568

3-1/2 SE90S 077569

4SE100S 077570

* Notes: All access fittings are UL listed for wet locations.

Supplied with threaded brass inserts, brass screws and PVC gasketing.

Stainless steel screws are available upon request.

4342

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

Note: Meter risers are 2' in length and come complete with male adapter.

Slip Meter Risers

Schedule 40, Size (in) Part Number Product Code

2SMR35TA 068371

2-1/2 SMR40TA 068372

3SMR45TA 068373

4SMR55TA 068374

“Two in One” Pull Elbow

Scepter’s “two in one” access pull elbow reduces inventory

costs and increases installation flexibility (3/4" hub fitting

supplied with 3/4" x 1/2" reducers). The pull elbow is approved

for wet locations and provides for easy wire pulling. They are

manufactured from high impact, nonconducting and

noncorroding PVC.

Size (in) Part Number Product Code

1/2 or 3/4 PE15/10 077491

FITTINGS

Meter Hubs

Size (in) Part Number Product Code

1-1/4 MHU25 077961

1-1/2 MHU30 077963

2MHU35 077965

2-1/2 MHU40 077967

3MHU45 077968

FITTINGS

Service Entrance Fittings

Size (in) Part Number Product Code

1/2 EF10 077281

3/4 EF15 077282

1EF20 077283

1-1/4 EF25 077284

1-1/2 EF30 077285

2EF35 077286

2-1/2 EF40 077287

3EF45 077288

3-1/2 EF50 077289

4EF55 077290

Offset Terminal Adapters

(Meter Offsets)

Size (in) Part Number Product Code

1-1/4 MO25 077941

2MO35 077942

Long Meter Offsets

(Fabricated)

Size (in) Part Number Product Code

1-1/4 LMO25 069641

1-1/2 LMO30 069645

2LMO35 069646

4544

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

COVER PLATES

F Series - Triple Gang Plates

1.415”

dia. dia. dia.

1.610” 1.760”

DRC15/10 TSC15/10 20RC15/1020-3RC15/1030-3RC15/10 BRC15/10

GASK 15/10

F Series - Single Gang Plates

Description Part Number Product Code

Duplex Receptacle DRC15/10 077617

Toggle Switch TSC15/10 077616

Single Receptacle 20RC15/10 077618

Single Receptacle 20-3RC15/10 077619

Single Receptacle 30RC15/10 077620

Blank c/w Gasket BRC15/10 077611

PVC Gasket only for F Series Box GASK15/10 077621

Description Part Number Product Code

Blank Cover c/w Gasket BRC20-2-U 077359

Double Switch TSC20-2-U 077373

Double Duplex Receptacle DRC20-2-U 077362

Combo Switch Duplex Rec. TSDC20-2-U 077374

PVC Gasket GASK20-2 077743

Foam Gasket with Adhesive GASKFU20-2 172650

Description Part Number Product Code

Triple Receptacle DRC20-3 077747

Combo Switch Receptacle DSDR20-3 077745

Triple Switch TSC20-3 077744

Combo Switch Receptacle TSDC20-3 077746

Blank Cover c/w Gasket BRC20-3 077748

PVC Gasket GASK20-3 077749

GASK20-2

F Series - Double Gang Plates

GASKF20-2-UBRC20-2-U TSC20-2-U DRC20-2-U TSDC20-2-U

FITTINGS

Note: All grommets are supplied with TSRCU10, TSRCU15 & SRCU15.

Socket Solvent Weld Strain Relief Connectors

Size (in) Part Number Product Code

3/4 SRC15 c/w 6

grommets 077985

3/4 SRCU15 c/w 4

grommets 077209

Strain Relief Connectors Grommet Dimensions

Nonmetallic Strain Relief Connectors

Scepter’s Nonmetallic Strain Relief Connectors are supplied

with all the components you need for a complete connection.

The connector body, a selection of grommets and compression

rings accepting a range of cord dimensions, a sealing ‘O’ ring

and metallic locknut are all supplied in one package. Available

in 1/2" and 3/4" threaded hub and 3/4" PVC socket solvent

weld configurations to accommodate a variety of applications.

Threaded, Strain Relief Connector

c/w “O”Ring, Locknut & 4 Grommets

Threaded, Strain Relief Connector

c/w “O”Ring, Locknut & 6 Grommets

Size (in) Part Number Product Code

1/2 TSRCU10 077244

3/4 TSRCU15 077261

Size (in) Part Number Product Code

1/2 TSRC10 077754

3/4 TSRC15 077756

GASK20-3

W = .195 W = .285

L = .450 L = .530

W = .220 W = .291

L = .516 L = .565

Ø = .240 Ø = .300"

Ø = .290 Ø = .385

Ø = .405 Ø = .500

Ø = .525 Ø = .625

4746

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

WEATHERPROOF COVERS

VSC20-2-U

VSRC20-2-U

VSDR20-2-U

Weatherproof Covers - Double Gang

Note: Weatherproof covers, with lids closed, are UL Listed for wet

locations.

Description Part

Number Product

Code

Toggle Switch Cover VSCU20-2 077376

Combination Switch

& GFI Receptacle VSRC20-2 077357

Combination Switch

& Duplex Receptacle VSDRU20-2 077356

Double Door GFI

Cover VSGG20-2 077096

Double Door Duplex

Cover VSDD20-2 077097

Gasket for 2-Gang ‘F’

Boxes (except

VSGG20-2 & VSDD20-2) GASKFU20-2 172650

Gasket for VSGG20-2

& VSDD20-2 Double

Gangs GASKV20-2 072227

VSDD20-2

VSGG20-2

WEATHERPROOF COVERS

WTL15

WTL20

WTL30

WDR15/10

RWDR15/10

WTL50

WGF15/10

RWGF15/10

WDRE15/10

RWDRE15/10

Description (in) Part

Number Product

Code

Plunger-style Switch

Cover VPT15/10 077630

Toggle Switch Cover VSC15/10 077612

Grey Toggle Switch

Cover WTG15/10 077606

Grey Duplex

Receptacle WDR15/10 077993

White Duplex

Receptacle RWDR15/10 077786

Grey Ground Fault

Receptacle WGF15/10 077785

White Ground Fault

Receptacle RWGF15/10 077787

Single Receptacle

Device 15 AMP 1.375 WTL15 077992

Single Receptacle

Device 20 AMP 1.625 WTL20 077994

Single Receptacle

Device 30 AMP 1.722 WTL30 077991

Single Receptacle

Device 50 AMP 2.187 WTL50 077951

Grey Double Door

Duplex Receptacle WDRE15/10 077087

White Double Door

Duplex Receptacle RWDRE15/10 077408

Gasket for W Series

Cover (except WDRE

& RWDRE) GASKW 077755

Gasket for WDRE &

RWDRE Covers GASKDD 072225

Weatherproof Covers - Single Gang

VSC15/10

VPT15/10

WTG15/10

Note: Weatherproof covers, with lids closed, are UL

Listed for wet locations.

4948

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

BOXES

FD-3

FSC-3-101520

FS-3-101520

F Series Double Gang Boxes

FS-2-U cu.in. = 38.5, FSC-2-U & FSS-2-U cu.in. = 37.0,

FSCC-2-U cu.in.= 35.0, FD-2-U cu.in.= 47.5

Hub Size

(in) Part Number Product

Code OD (inches)

H W D

1/2, 3/4, 1 FS-2-101520-U 077364 4.62 4.62 2.5

1/2, 3/4, 1 FSC-2-101520-U 077368 4.62 4.62 2.5

1/2, 3/4, 1 FSS-2-101520-U 077372 4.62 4.62 2.5

1/2, 3/4, 1 FSCC-2-101520-U 077369 4.62 4.62 2.5

Blank FD-2-U 077649 4.62 4.62 3.0

F Series Triple Gang Boxes

FS-3 cu.in. = 56.0, FSC-3 cu.in. = 54.0

Hub Size (in) Part Number Product

Code OD (inches)

H W D

1/2, 3/4, 1 FS-3-101520 077337 4.5 6.6 2.5

1/2, 3/4, 1 FSC-3-101520 077438 4.5 6.6 2.5

Blank FD-3 077737 4.5 6.6 3.0

Note: All F series & octagonal boxes are supplied with integral

mounting feet, threaded brass inserts and grounding clips

FD-2-U

FSS-2-101520-U

FSCC-2-101520-U

FS-2-101520-U

FSC-2-101520-U

BOXES

F Series Single Gang Boxes

Outside Dimensions:

Height, 49/16" – Width, 213/16" – Depth 2", Cubic Inches = 25.67

Size (in) Part Number Product Code

1/2 FSC10 077607

3/4 FSC15 077608

1/2 FS10 077601

3/4 FS15 077602

1/2 FSCC10 077622

3/4 FSCC15 077623

1/2 FSS10 077604

3/4 FSS15 077605

Note: 10 = 1/2" Hub, 15 = 3/4" Hub

FS FSCC

FSC FSS

FD Series Single Gang Deep Boxes

Outside Dimensions:

Height, 49/16" – Width, 213/16" – Depth 23/4", Cubic Inches = 35.30

With the exception of the FD Blank Box, Scepter FD Series

Single Gang Deep Boxes are molded with 1" conduit hubs and

supplied with reducer bushings. The conduit hub(s) are field

modified as 1/2", 3/4" or 1" to accommodate job-site

requirements. The appropriate quantity of 1" x 3/4" and 3/4" x

1/2" reducers to create the desired hub size are packaged with

each FD Series Single Gang Deep Box.

Size (in) Part Number Product Code

1/2, 3/4, 1 FDC101520 077291

1/2, 3/4, 1 FDS101520 077299

BLANK FD BLANK 077603

347 VOLT FD347 077610

FDC101520

FDS101520

FD Blank

Note: 10 = 1/2" Hub, 15 = 3/4" Hub, 20 = 1" Hub

5150

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

Fabricated Boxes

Unflanged PVC fabricated boxes of any size may be made to

customers’ specifications and come complete with lids,

gaskets and screws. These boxes are not UL Listed and are not

returnable.

BOXES

BCAA

Junction boxes are supplied

with threaded brass

inserts, brass screws,

PVC gasketing and

mounting feet. Nylon

and stainless steel

screws, and larger sizes

of fabricated junction

boxes, are available

upon request.

Part

Number Product

Code A

(in) B

(in) C

(in) E

(in) F

(in)

JB442 077659 3.675 4.000 3.450 2.125 2.000 8-32

JB444 077696 3.675 4.000 3.450 4.188 3.750 8-32

JB446 077669 3.675 4.000 3.450 6.225 6.000 8-32

JB552 077670 4.680 5.000 4.485 2.000 1.845 8-32

JB664 077697 6.000 6.375 5.813 4.180 4.000 10-32

JB666 077698 6.000 6.375 5.813 6.188 6.000 10-32

JB884 077664 8.075 8.625 7.966 4.230 4.005 1/4-20

JB887 077671 8.100 8.625 7.966 7.250 7.035 1/4-20

JB12124 077672 12.085 12.580 11.874 4.256 4.030 1/4-20

JB12126 077666 12.085 12.580 11.874 6.240 6.025 1/4-20

JB12128 077668 12.085 12.580 11.874 8.250 8.025 1/4-20

PVC Molded Junction Boxes

(F = Threaded brass insert size.)

Scepter PVC junction boxes are:

NEMA 1, 2, 3, 4, 4X, 6P, 12, 13

UL listed for wet locations

LFB150C

Threaded Round Box

Scepter’s Threaded Junction Boxes are corrosion resistant,

non-conductive and incorporate high-temperature silicone

gaskets and brass hardware to withstand extreme temperature

variations. Manufactured from glass-reinforced thermoplastic

polyester resin, these boxes can endure extreme temperatures

(material temperature range -40°F to +302°F).

BOXES

Octagonal Boxes*

Octagonal Boxes are shipped complete with

cover, gasket, 4 reducing bushings (3/4" x

1/2") and 4 sealing caps to be installed from

inside box to seal off unused entry hubs.

Size (in) Part Number Hub Size (in) Product Code

4 x 1-1/2 OB15/10 1/2 – 3/4 077983*

4 x 2-1/8 OB20 1077984*

Octagonal Box Extension Rings*

Size (in) Part Number Product Code

4 x 1 deep XR20 077989*

4 x 2 deep XR35 077990*

* Octagonal Boxes are not designed for supporting luminaries.

Note: All F series & octagonal boxes are supplied with integral

mounting feet, threaded brass inserts and grounding clips

Size (in) Part Number Product Code

4 - 3/4" Threaded Hubs LFB150C 077250

4 - 3/4" Threaded Hubs

c/w 1/2" Threaded Hole in Cover LFB150T 077251

LFB150T

5352

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

BOXES

Floor Box Base

(Includes disposable protective cap & reducer plugs)

076954 FB

Floor Box Base c/w Leveling Ring Adapter

(includes disposable protective cap, reducer plugs

& leveling ring adapter)

077068 FBKIT

Floor Box Stand Kit (includes FB Box)

(is equiped with several height brackets which

accommodate the different rebar and post-tension cable heights and

slab depths found from job-site to job-site.)

077700 FBSKIT

Metal Cover Adapter Kit

(includes leveling ring, metal cover adapter & 2 gaskets)

076953 AFMC

Universal Leveling Ring Adapter

076606 LRA-U

Floor Box Duplex Receptacle Cover (Nonmetallic)

(includes flush mount cover, blank cover & gasket)

Brown 076955 FBDRCB

Gold 076949 FBDRCG

Grey 076600 FBDRCGr

Light Almond 076605 FBDRCA

Nonmetallic Floor Box, Cover & Metal Cover

Adapter

Installation is quick and simple with our nonmetallic floor box

and covers, saving both time and money over similar metallic

assemblies.

Scepter’s floor box and duplex receptacle covers are constructed

from high impact, noncorroding and nonconducting PVC.

The flush-mount covers are available in custom colors and are

shipped with a leveling ring. Metal cover adapter kits are also

available, allowing you to adapt to metal floor plates. Our 6" deep

floor box allows flexibility for various concrete floor pours, while the

4-3/4" width offers easy access and ample wire room. Scepter’s FB

box is molded with 2 - 1" and 2 - 3/4" hub openings.

All boxes are shipped complete with reducer plugs for added

versatility.

AFMC

LRA-U

FBDRC

Description Product

Code Part

Number

BOXES

Standard PVC

Coupling

Flanged Box with Fiber-Reinforced Safety

Tread Cover

Scepter’s Flanged ‘H’ Series Junction Boxes provide H10 Highway

Loading. The fiber-reinforced safety tread cover secures using

recessed Hex Key fastening hardware offering a simple installation

while reducing the opportunity for tampering.

H887 H887-A

Junction Box Adapters

Junction Box Adapters, installed using

a standard PVC coupling, offer a

trouble-free and reliable PVC

connection. In addition to providing a

strong connection, the JBA also

maximizes the interior box wiring

space unlike the use of male adapters

(TA) and facilitates wire pulling - the

smooth internal edges limiting the

potential for wire damage.

Size (in) Part Number Product Code

1/2 JBA10 077721

3/4 JBA15 077722

1JBA20 077723

1-1/4 JBA25 077724

1-1/2 JBA30 077725

2JBA35 077726

2-1/2 JBA40 077727

3JBA45 077728

3-1/2 JBA50 077729

4JBA55 077730

Junction Box

Adapter

Part

Number Product

Code Box ID (in)

L W D Lid Dimensions (in)

A B C

H664 077685 6 6 4-1/4 9.0 9.0 0.60

H666 077686 6 6 6-1/4 9.0 9.0 0.60

H884 077687 8 8 4-1/4 11.5 11.5 0.75

H886 077688 8 8 6-1/4 11.5 11.5 0.75

H887 077689 8 8 7-1/4 11.5 11.5 0.75

H887-A 077692 8 8 7-1/4 11.5 11.5 0.75

FBS-KIT

Junction box and couplings

sold separately

5554

SCEPTER CONDUIT

FITTINGS

SCEPTER CONDUIT

FITTINGS

SPACERS

COVER PLATES / CEMENTS & PRIMER

Brass Cover Plates

(offers a one-piece design measuring 5-3/4"

diameter. Are available in a variety of

styles accommodating power and

communication needs. Install to the FB

box using the universal leveling ring adapter.

Cements

Size Part Number Product Code

250ml (1/2 Pint) S100PT5 078883

500ml (Pint) S100PT 078884

1L (Quart) S100QT 078885

4L (Gallon) S100GAL 078887

Primer

c/w Applicator Cap

Size Part Number Product Code

250ml (1/2 Pint) C100PT5 078163

500ml (Pint) C100PT 078174

1L (Quart) C100QT 078175

Size Part Number Product Code

500ml (Pint) CWC10 078503

1L (Quart) CWC20 078886

Scepter 100 - Cold Weather / Wet Weather

Cement

Description Part Number Product Code

Duplex Screw Cover DSC 178091

Duplex Screw Cover DSC-P/C 178092

Single Screw Cover SSC 178093

Single Screw Cover SSC-P/C 178094

Duplex Flip Lid (single) DFL-1 178095

Duplex Flip Lid (double) DFL-2 178096

Tri-Service Universal Divider Kit

(includes upper & lower dividers, riser tube & two grommets)

077948 FBUDK

Y Connector (3/4")

077499 FBYC

FBUDK

FBYC

Intermediate

Vertical-Lok Spacers

Dimension

(in) Part Number Product

Code A inches B inches C inches

2 x 1-1/2 IS3530 029550 1.500 3.937 0.62

2 x 2 IS3535 029551 2.000 4.488 0.62

2 x 3 IS3545 029552 3.000 5.433 0.62

3 x 1-1/2 IS4530 029553 1.500 5.130 no rebar slots

3 x 2 IS4535 029554 2.000 5.630 0.87

3 x 3 IS4545 029555 -6.614 0.87

4 x 1 IS5520 029556 1.000 5.630 no rebar slots

4 x 1-1/2 IS5530 029557 -6.614 0.87

4 x 2 IS5535 029558 2.000 6.614 0.87

4 x 3 IS5545 029559 3.000 7.638 0.87

5 x 1-1/2 IS6030 029560 1.500 7.325 no rebar slots

5 x 2 IS6035 029561 2.188 7.874 0.87

5 x 3 IS6045 029562 3.188 8.701 0.87

6 x 1-1/2 IS6530 029563 -7.441 0.87

6 x 2 IS6535 029564 -7.677 0.87

6 x 3 IS6545 029565 3.000 9.764 0.87

8 x 2 IS8035 029294 - - no rebar slots

BBB

CONDUIT REPAIR KIT 57

CONDUIT REPAIR KIT

SCEPTER CONDUIT

FITTINGS

SPACERS / CONDUIT REPAIR KIT

Size (in) Part Number Product Code Length (in)

1-1/4 EPR25 077976 24

1-1/2 EPR30 077971 24

2EPR35 077972 24

2-1/2 EPR40 077973 24

3EPR45 077974 24

4EPR55 077975 24

5EPR60 077977 24

6EPR65 077979 24

EPR Kits for Conduit Repair

EPR Kits from IPEX are the first total

repair systems for broken and damaged

PVC conduit. They offer fast and easy

repairs for damaged conduit caused by

actions such as earth excavation,

horizontal and core drilling.

All sizes are 24 inches in length.

Base

Vertical-Lok Spacers

Dimension

(in) Part Number Product

Code A inches B inches C inches

2 x 1-1/2 BS3530 029566 2.992 3.937 0.62

2 x 2 BS3535 029567 2.992 4.488 0.62

2 x 3 BS3545 029568 2.992 5.433 0.62

3 x 1-1/2 BS4530 029569 3.000 4.615 no rebar slots

3 x 2 BS4535 029570 2.992 5.630 0.87

3 x 3 BS4545 029571 2.992 6.614 0.87

4 x 1 BS5520 029572 1.750 4.060 no rebar slots

4 x 1-1/2 BS5530 029573 2.992 6.614 0.87

4 x 2 BS5535 029574 2.992 6.614 0.87

4 x 3 BS5545 029575 2.992 7.638 0.87

5 x 1-1/2 BS6030 029576 3.000 6.900 no rebar slots

5 x 2 BS6035 029577 2.992 7.874 0.87

5 x 3 BS6045 029578 2.992 8.701 0.87

6 x 1-1/2 BS6530 029579 3.031 7.441 0.87

6 x 2 BS6535 029580 3.031 7.677 0.87

6 x 3 BS6545 029581 2.992 9.764 0.87

8 x 2 BS8035 029293 - - no rebar slots

SCEPTALIGHTTM

SCEPTALIGHT: The Light That Lasts

Sceptalight fixtures from IPEX prove themselves to be all-round

performers in a variety of indoor and outdoor applications.

Sceptalight fixtures are made from a glass-reinforced

thermoplastic polyester resin, which enable them to stand up

better to corrosive elements than metal. This thermoplastic

design marries an unrivaled balance of strength, stiffness and

toughness with all the benefits users appreciate of Scepter

rigid PVC conduit and fittings - long life, easy servicing and

high impact-resistance.

Sceptalight's thermoplastic construction offers outstanding

corrosion and chemical resistance. And its interior and exterior

silicone gaskets create a watertight seal, the reason it performs

equally well indoors and outside.

Features and Benefits

• Stable Construction

• Watertight seal with weather-resistant silicone gaskets

• Corrosion Resistant

• Durable and Impact Resistant

Mounting Options

Box with four 3/4

threaded hubs and

integral mounting feet.

CEILING MOUNT

Box with four 3/4

threaded hubs, 90º wall

bracket and integral

mounting feet.

WALL MOUNT

Pendant cap with

3/4

threaded hub

and a locking set

screw.

PENDANT MOUNT

SCEPTALIGHT

NOTES

____________________

6160

SCEPTALIGHT

SCEPTALIGHTTM

Wet Locations

Ceiling Mount

with Standard Clear Glass Globe Part

Number Product

Code

150W Incandescent LVPF150C 077225

150W Incandescent less guard LVPF150LG 077237

26W Compact Fluorescent LVPL26C 077170

18W Compact Fluorescent LVPL18C 077210

13W Compact Fluorescent LVPL13C 077122

9W Compact Fluorescent LVPL9C 077121

7W Compact Fluorescent LVPL7C 077120

Ceiling Mount with Clear Polycarbonate

Glass Globe (no guard) Part

Number Product

Code

26W Compact Fluorescent LVPL26PCC 077176

18W Compact Fluorescent LVPL18PCC 077211

13W Compact Fluorescent LVPL13PCC 077165

9W Compact Fluorescent LVPL9PCC 077155

7W Compact Fluorescent LVPL7PCC 077145

4 3/4"

10"

9 1/2"

4 3/4"

11 3/4"

Ceiling Mount Ceiling Mount Ceiling Mount

Polycarbonate Globe

C22.2 No. 250

UL 1598

Minimum 60ºC supply conductors

Wall Mount Bracket

Description Part

Number Product

Code

Use with Wet, Marine and Hazardous

locations. For wall mount fixtures select

and order the appropriate style (wattage

and globe) ceiling mount fixture from

above and add LWB150.

LWB150 077233

SCEPTALIGHTTM

Globe Options

Sceptalight offers a variety of globe options to suit a wide range

of applications and environments. Our standard clear glass

globes are ideal for general purpose area lighting for either

indoor or outdoor use. Polycarbonate globes offer impact

resistance in case of accidental contact and the assurance that

work areas are not contaminated by broken glass. Colored

globes - available in red, blue, green or amber - can transform

the light to an indicator or warning light.

Light Options

Fluorescents

Our compact fluorescent fixtures work four to five times more

efficiently per watt than incandescents and provide 10-20

times the lamp life, yet use approximately 75% less energy. In

this way, Sceptalight fluorescents lower energy and maintenance

costs without sacrificing light levels.

Incandescents

With their low initial cost, Sceptalight incandescent fixtures

make the most practical choice to meet the daily needs of

commercial, industrial, marine and agricultural applications.

Our incandescents are ideal for short burn times as well as

flashing and dimming applications.

Heat-treated

Amber Glass

Heat-treated

Green Glass

Heat-treated

Blue Glass

Heat-treated

Red Glass

Clear

Polycarbonate Standard or Heat-treated

Clear Glass

Wet

Locations con’t

Pendant Mount

6362

SCEPTALIGHT

SCEPTALIGHTTM

Ceiling Mount

with Heat Resistant Glass Globe Part

Number Product

Code

150WIncandescent clear LVPF150HRC-HAZ 077414

150WIncandescent red LVPF150HRR-HAZ 077415

150WIncandescent blue LVPF150HRB-HAZ 077416

150WIncandescent green LVPF150HRG-HAZ 077417

150WIncandescent amber LVPF150HRA-HAZ 077494

26WCompact Fluorescent clear LVPL26HRC-HAZ 077377

26WCompact Fluorescent red LVPL26HRR-HAZ 077378

26WCompact Fluorescent blue LVPL26HRB-HAZ 077379

26WCompact Fluorescent green LVPL26HRG-HAZ 077399

26WCompact Fluorescent amber LVPL26HRA-HAZ 077400

18WCompact Fluorescent clear LVPL18HRC-HAZ 077347

18WCompact Fluorescent red LVPL18HRR-HAZ 077348

18WCompact Fluorescent blue LVPL18HRB-HAZ 077349

18WCompact Fluorescent green LVPL18HRG-HAZ 077353

18WCompact Fluorescent amber LVPL18HRA-HAZ 077354

Hazardous

Locations

Ceiling Mount

Pendant Mount

with Heat Resistant Glass Globe Part

Number Product

Code

150WIncandescent clear LPMF150HRC-HAZ 077495

150WIncandescent red LPMF150HRR-HAZ 077496

26WCompact Fluorescent clear LPPL26HRC-HAZ 077407

26WCompact Fluorescent red LPPL26HRR-HAZ 077409

18WCompact Fluorescent clear LPPL18HRC-HAZ 077500

18WCompact Fluorescent red LPPL18HRR-HAZ 077498

Pendant Mount

UL 844

Class I, DIV 2 Groups A,B,C & D

Class II, DIV 2 Groups F & G

Minimum 90oC supply conductors

Wall Mount Bracket

Description Part

Number Product

Code

Use with Wet, Marine and Hazardous

locations. For wall mount fixtures select

and order the appropriate style (wattage

and globe) ceiling mount fixture from

above and add LWB150.

LWB150 077233

SCEPTALIGHTTM

Pendant Mount

with Standard Clear Glass Globe Part

Number Product

Code

150W Incandescent LPMF150C 077231

26W Compact Fluorescent LPPL26C 077184

18W Compact Fluorescent LPPL18C 077212

13W Compact Fluorescent LPPL13C 077185

9W Compact Fluorescent LPPL9C 077183

7W Compact Fluorescent LPPL7C 077182

Pendant Mount with Clear

Polycarbonate Globe (no guard) Part

Number Product

Code

26W Compact Fluorescent LPPL26PCC 077375

18W Compact Fluorescent LPPL18PCC 077273

13W Compact Fluorescent LPPL13PCC 077365

9W Compact Fluorescent LPPL9PCC 077355

7W Compact Fluorescent LPPL7PCC 077345

4 3/4"

10 1/4"

4 3/4"

12"

Marine

Locations

Ceiling Mount

Pendant

Ceiling Mount

with Heat Resistant Glass Globe Part

Number Product

Code

100W Incandescent LVPF100C-MAR 077275

Ceiling Mount

with Heat Resistant Glass Globe Part

Number Product

Code

100W Incandescent LPMF100C-MAR 077276

C22.2 No. 250

UL 1598, UL 1598A, UL 1598

Minimum 110oC supply conductors

SCEPTALIGHTTM 6564

SCEPTALIGHT

SCEPTALIGHTTM

Nonmetallic Utility Light Fixture

Globe Description Part

Number Hub

Size (in) Product

Code

Fixture c/w

Clear Glass Globe LVPE150-10/15 1/2 x 3/4 077493

Fixture c/w Clear

Polycarbonate Globe LVPE150-PCC* 1/2 x 3/4 077181

Fixture c/w Heat

Resistant Clear Globe LVPE150-HRC 1/2 x 3/4 077578

Fixture c/w Heat

Resistant Red Globe LVPE150-HRR 1/2 x 3/4 077599

Fixture c/w Heat

Resistant Blue Globe LVPE150-HRB 1/2 x 3/4 077579

Fixture c/w Heat

Resistant Green Globe LVPE150-HRG 1/2 x 3/4 077597

Fixture c/w Heat

Resistant Amber Globe LVPE150-HRA 1/2 x 3/4 077598

Replacement

Clear Glass Globe LGC150 077247

Nonmetallic

Clamp-on Guard LVPUG150 077558

Fixture c/w

Clear Glass Globe &

Clamp-on guard LVPE150-1015G 1/2 x 3/4 077402

* Maximum 60W incandescent lamp with polycarbonate globe

LVPE150 LVPE150-PCC

5 1/8"

11"

5 1/8"

9 7/8"

3 1/2"

LVPUG150 LVPE150-1015G

Accessories & Components

Heat Resistant Globes

Description Part Number Product Code

Clear LG150T 077909

Red LCGR150T 077239

Blue LCGB150T 077910

Green LCGG150T 077241

Amber LCGA150T 077242

Polycarbonate Globes (for use with

compact fluorescent or maximum 60W incandescent lamp)

Description Part Number Product Code

Clear LPCC18 077911

Red LPCR18 077912

Blue LPCB18 077913

Green LPCG18 077914

Amber LPCA18 077915

Standard Glass Globes

Description Part Number Product Code

Clear LGC150 077247

KWIKFLEX®67

KWIKFLEX

KWIKFLEX: NMLT Conduit & Fittings

Kwikflex®NMLT Type B on reels are UL listed in all lengths

Available in sizes from 3/8" to 2", reels offer the end user the

best possible continuous length in the market place. Its

patented design offers a low profile coupling that when two

conduits are connected it is hardly noticeable and allows the

user to run the conduit at any length desirable. There is no

longer any need for additional parts when making a long

conduit run.

Kwikflex NMLT is also available in extra-flexible formulations in

sizes 3/8" to 2"

Coils come packaged in easy to ship cartons

Coils are conveniently packaged in cardboard boxes to keep the

pipe clean and come with a center knock-out for easy dispensing.

Applications

• HVAC equipment

• Machine tools

• Marine equipment

• Motors & controls

• Printing equipment

• Pumps

• Refrigeration equipment

• Transformer connections

• Outdoor lighting

NOTES

____________________

6968

KWIKFLEX

KWIKFLEX®

NMLT Flexible Conduit

(Grey) Type B

Size (in) Product Code Length (ft)

3/8 165005 100

1/2 165007 100

3/4 165009 100

1165011 100

1-1/4 165014 100

1-1/2 165017 50

1-1/2 165021 100

2165020 50

NMLT Flexible Conduit Reels

(Grey) Type B

Size (in) Product Code Length (ft)

1/2 165082 1000

3/4 165085 700

1165090 500

NMLT 90º Elbows (Grey)

Size (in) Part Number Product code

3/8 LTB03/90 065306

1/2 LTB10/90 065307

3/4 LTB15/90 065310

1LTB20/90 065312

1-1/4 LTB25/90 065314

1-1/2 LTB30/90 065317

2 LTB35/90 065320

NMLT Extra Flexible Tubing

(Black)

Size (in) Product Code Length (ft)

3/8 165055 100

1/2 165057 100

3/4 165059 100

1165061 100

1-1/4 165064 100

1-1/2 165067 100

2 165070 100

Other packages sizes available on request

NMLT Screw-on 90º Elbows

(Grey)

Size (in) Part Number Product code

1/2 LTD10/90 065350

3/4 LTD15/90 065352

NMLT Straight Fittings (Grey)

Size (in) Part Number Product code

3/8 LTS03 065326

1/2 LTS10 065327

3/4 LTS15 065330

1LTS20 065332

1-1/4 LTS25 065334

1-1/2 LTS30 065337

2 LTS35 065340

KWIKON®ENT

Kwikon®ENT

Savings for the Long Run

Noncorroding and nonconducting, Kwikon Electrical Nonmetallic

Tubing and fittings are designed

For The Long Run

. Coiled in

lengths up to 1,500 feet, the Kwikon system can span the

longest run. Encased in concrete, concealed in walls or ceilings,

Kwikon offers the best alternative to the labor-intensive, 10'

lengths of metal conduit with its couplings and scrap.

Now you can use the Kwikon ENT system for communications

(yellow), fire alarm and emergency (red), as well as power

(blue) applications. It comes with color-coded stripes for easy

identification on 1,500 ft., 1000 ft. and 750 ft. reels. The

Kwikon ENT system is the right choice.

Kwikon Fittings

Our unique Kwikon couplings, transition couplings and

connectors are designed with six 360° locking tabs to ensure a

secure concrete-tight connection.

Time-consuming taping and solvent welding are eliminated.

Kwikon fittings are permitted for use with all UL Listed and

CSA certified ENT.

UL 514B, UL 514C

UL 1653 TC-13 C22.2 No. 21127, C22.2 No. 85

FT-4 Rated

KWIKON ENT

KWIKFLEX

KWIKFLEX®

NMLT Screw-on Straight Fittings

(Grey)

Size (in) Part Number Product code

1/2 LTD10 065360

3/4 LTD15 065362

NMLT Screw-on Multi Angle

Fittings (Grey)

Size (in) Part Number Product code

1/2 LTMA10 065015

3/4 LTMA15 065016

7372

KWIKON ENT

ENT TUBING

Exposed Work

ENT is permitted to be used for exposed work, where not subject

to physical damage, in buildings not exceeding 3 floors above grade.

Pulling Wire

Kwikon’s interior corrugated surface

greatly reduces the amount of friction

while pulling conductors through long

runs, even with 90° bends.

Transition from ENT to EMT

Transition from ENT to EMT no longer

requires solvent welding. Simply connect

the Kwikon transition coupling to EMT

with the set screw and snap on to ENT.

NEC, Article 362

Rules governing the installation of

Kwikon ENT are covered in the 2011

National Electrical Code, ANSI/NFPA

Article 362. Kwikon ENT systems are

recognized for use in places of assembly

as referenced in Articles 518 & 520.

Kwikon ENT may be installed exposed, in

areas not subject to physical damage

where the building does not exceed three

floors above grade [(362.10 (1)].

Kwikon ENT may be concealed in floors, walls, ceilings and

suspended ceilings where a thermal barrier of material has a

minimum of 15-minute finish rating.

NOTE: Kwikon ENT may

penetrate fire-rated walls, floors or ceilings with a UL Listed or

recognized through-penetration fire-stop system.

Fire Resistive Construction & Wall Assemblies

Kwikon ENT tubing, Kwikon fittings and

Kwikon slab boxes are approved for use in

noncombustible 2 hr. and 4 hr. fire rated

floor-ceiling assemblies. Normal weight

concrete cover must be provided of a

minimum of 2-1/8" for 2 hr. assemblies

and 2-3/8" for 4 hr. assemblies. [ULI File:

E 78276 and ULC File: R-19226].

Kwikon ENT and Kwikon fittings have

been investigated for use in a nonload-

bearing wall and partition assembly. The

report (ULC CR2196) concludes the wall

assemblies with Kwikon ENT and fittings

will provide a 2 hr. resistance to the

passage of flame and dangerous

transmission of heat.

Ease of Installation

Engineered for the rugged day-to-day

challenges of the construction industry,

Kwikon has already established itself as

a market leader. Requiring no special

tools for bending or cutting, Kwikon is

easily installed.

Bending & Cutting

Kwikon’s corrugated construction allows

it to be easily bent by hand, no longer

requiring special bending equipment

traditionally required with metal conduit

systems. When bending, ensure the

radius of the curve is at least six times

the internal diameter of the tubing.

Kwikon Slab Boxes

Kwikon slab boxes are available with or

without molded connectors. For boxes

without molded connectors, preassembly

is quick and simple using our threaded

male adapter with locknuts. This provides

a secure concrete-tight connection.

Pre-Assembly of Metallic

Boxes

Metal slab boxes can be quickly

preassembled with Kwikon connectors.

Secured with a locknut, Kwikon connectors

provide a concrete-tight connection.

Installation in Sheer Walls,

Interior Walls & Block Walls

Kwikon’s flexibility, lightweight and ease of

handling in metal, wood or block walls,

combined with Kwikon connectors and

couplings, substantially reduce time and

labor needed to install electrical raceways.

Use in Ceilings

Kwikon ENT is permitted for use in

ceilings where not subject to physical

damage and in buildings 3 storeys or more

provided the ceiling provides a 15-minute

finish rating.

ENT TUBING

7574

KWIKON ENT

E 59258, E 119384 TC-13 C22.2 No. 227.1

KWIKON®COUPLINGS / CONNECTORS

Kwikon Coupling

Size (in) Part Number Product Code

1/2 KC10 089000

3/4 KC15 089001

1 KC20 089002

1-1/4 KC25 189670

1-1/2 KC30 189671

2KC35 189672

Kwikon Connector For

Concrete Encasement

Size (in) Part Number Product Code

1/2 KTA10 089006

3/4 KTA15 089007

1 KTA20 089008

1-1/4 KTA25 189680

1-1/2 KTA30 189681

2KTA35 189682

Kwikon Snap-in Connector

Size (in) Part Number Product Code

1/2 KTS10 089146

3/4 KTS15 089147

1 KTS20 089148

Kwikon Transition Coupling

Size (in) Part Number Product Code

1/2 KTC10 089012

3/4 KTC15 089013

1 KTC20 089014

ENT TUBING

Kwikon ENT - Blue Stripe

Wrapped in plastic, coils are easily dispensed from the center.

ReelCoil

All Kwikon ENT is UL Listed for use in walls, floor slabs and

ceilings, as outlined in Article 362 of the 2005 NEC Code.

Storage of Kwikon ENT Tubing

Manufacturer recommends that ENT tubing should not be

stored outdoors where subjected to direct sunlight without

protective covering, i.e. packaging or tarps.

Size (in) Length (ft) Product Code Weight lbs/pkg

1/2 1500 012002 165

3/4 1000 012011 158

1 750 012021 160

1-1/4 1000 012047 193

1-1/2 750 012033 205

2 500 012044 220

1/2 200 012031 20

3/4 100 012040 12.5

1 100 012041 17

1-1/4 500 012046 76

1-1/2 300 012032 50.5

2 225 012043 69.5

Kwikon ENT - 10' Sticks with Blue Stripe

Size (in) Length (ft) Product Code Crate Qty

1/2 10 012001 3,600

3/4 10 012010 2,200

110 012034 1,800

Kwikon ENT Reels - Color Coded

Size

(in) Length

(ft) Product Code Weight

lbs/reel

Red Yellow Blue

1/2 1500 012305 012335 012002 165

3/4 1000 012307 012337 012011 158

1750 012310 012340 012021 160

1-1/4 1000 012037 012038 012047 193

1-1/2 750 012035 012036 012033 205

2500 012039 012042 012044 220

E 122659 TC-13

7776

KWIKON ENT

KWIKON®ESU & ACCESSORIES

Kwikon 90oStub Down Fittings

Size (in) Part Number Product Code

1/2 KT90-10 089060

3/4 KT90-15 089059

1 KT90-20 089058

KT90 Stub Down Fittings

(Kwikon x Threaded)

Size (in) Part Number Product Code

1/2 KK90-10 089055

3/4 KK90-15 089056

1 KK90-20 089057

KK90 Stub Down Fittings

(Kwikon x Kwikon)

Kwikon ENT Form Stubby

Size (in) Part Number Product Code

1/2 KSTB-10 089330

3/4 KSTB-15 089331

1 KSTB-20 089332

1-1/4 KSTB-25 089333

Kwikon ENT Multi-LinkTM

Form Stubby

Size (in) Part Number Product Code

1/2 MSTB-10 089031

3/4 MSTB-15 089026

1 MSTB-20 089025

Kwikon ENT Angled Form Stubby

Size (in) Part Number Product Code

1/2 KASTB-10 089233

3/4 KASTB-15 089234

1KASTB-20 089235

1-1/4 KASTB-25 089236

1-1/2 KASTB-30 089238

KWIKON®COUPLINGS / CONNECTORS

Accessories

The

NEW ENT Support Unit (ESU)

raises the tubing or conduit up off the concrete form

during the concrete pour maintaining a level

raceway and allows for maximum aggregate flow and

concrete consolidation.

Easy to use, the ESU snaps around any size of ENT.

It is perfect for use in high rise buildings constructed with post-

tensioned (PT) concrete slabs.

Features

• One size fits all 1/2" - 2"

• Saves time and labour

• Easy locking mechanism

• Securable to the concrete form

• Minimal footprint reduces amount of surface contact

Part Number Product Code

ESU-10-35 089149

Tapered Plugs

Size (in) Part Number Product Code

1/2 TP10 089003

3/4 TP15 089004

1TP20 089005

Kwikon Cutter & Blades

Description Part Number Product Code

Cutter (1/2"- 1") CLC20 089066

Blades for CLC20 SSB 089067

Cutter (1/2"- 2") CLC35 089068

Blades for CLC35 SB35 089069

7978

KWIKON ENT

KWIKON®SLAB BOXES

Hub Size (in) Part Number Product Code

8 x 1/2 SMBS-H-10 089480

4 x 1/2 & 4 x 3/4 SMBS-H-10/15 089481

8 x 3/4" SMBS-H-15 089482

4 x 1/2, 2 x 3/4, 2 x 1 SMBS-H-10/20 089483

4 x 3/4 & 4 x 1 SMBS-H-15/20 089484

Hub Size (in) Part Number Product Code

8 x 1/2 SMBS-10 089490

4 x 1/2, 2 x 3/4, 2 x 1 SMBS-10/20 089491

Description Part Number Product Code

4 x 1/2", 2 x 3/4", 2 x 1" MB-10/20 089016

8 x 1/2" knockouts MB-10 089017

Shallow Slab Box

ENT Slab Box

Slab Box with Knockouts (w/o Molded Connectors)

Shallow Slab Box with Molded Connectors

Shallow Slab Box without Molded Connectors

Description Part Number Product Code

8 x 1/2" connectors MBH-10 089022

8 x 3/4" connectors MBH-15 089018

4 x 1/2", 4 x 3/4" connectors MBH-10/15 089020

4 x 1/2", 2 x 3/4", 2 x 1"

connectors MBH-10/20 089019

4 x 3/4", 4 x 1" knockouts MBH-15/20 089021

Slab Box with Molded Connectors (Hubs)

KWIKON®SLAB BOXES

Kwikon Slab Boxes

Engineered to be rugged and durable, Kwikon slab boxes

withstand construction’s harshest environments. Designed by

contractors for contractors, Kwikon slab boxes are available in two

unique styles, with or without molded connectors. Now you can

provide a complete, nonmetallic slab system. priced competitively

with traditional steel mud boxes, Kwikon slab boxes increase

labor efficiencies, reducing costs.

Standard Slab Boxes

Hub Size (in) Part Number Product Code

8 x 1/2 SMB-H-10 089465

8 x 3/4 SMB-H-15 089462

4 x 1/2, 4 x 3/4 SMB-H-10/15 089458

4 x 1/2, 2 x 3/4, 2 x 1 SMB-H-10/20 089466

4 x 3/4, 4 x 1 SMB-H-15/20 089464

Knockout Size (in) Part Number Product Code

8 x 1/2 SMB-10 089460

4 x 1/2, 2 x 3/4, 2 x 1 SMB-10/20 089461

Hub Size (in) Part Number Product Code

8 x 1/2 SSBH-10 089467

8 x 3/4 SSBH-15 089468

4 x 1/2, 2 x 3/4, SSBH-10/15 089469

4 x 1/2, 2 x 3/4, 2 x 1 SSBH-10/20 089474

4 x 3/4, 4 x 1 SSBH-15/20 089475

4" Square Slab Box

Slab Box with Molded Connectors

Slab Box without Molded Connectors

Slab Box with Molded Connectors

• Approved for support of ceiling fans up to 35 lbs and

luminaries up to 50 lbs

• Corner and traditional mounting tabs offer contractors two

options when installing to the slab deck

• Angled design guides the nail into position within the trim

cover area

• Ready to install – no assembly required

• Clear Vue vacuum formed removable covers

8180

KWIKON ENT

KWIKON®SLAB BOXES

KSB-10/15 KDSB-2-10/15

KVP KFC-10 KWBC-10

KDCB-10/15

KCB-10

KRCD-2-10 KRCD-2-15

KDSB-2-10

KRC-10 KRC-15

ENT Wall Boxes, Ceiling Boxes & Covers

Size (in) Part Number Product Code

Ceiling Box 2-1/16" Deep KCB-10 089506

4" Set-Up Box 2-1/16" Deep KDCB-10/15 089507

Switch Box 3-1/16" Deep KSB-10/15 089508

4" Square Box 1-1/2" Deep KDSB-2-10 089509

4" Square Box 2-1/8" Deep KDSB-2-10/15 089510

Raised 1/2" Single Device KRC-10 089501

Raised 5/8" Single Device KRC-15 089502

Raised 1/2" Two Devices KRCD-2-10 089503

Raised 5/8" Two Devices KRCD-2-15 089504

Round Flat Cover, 1/2" KO KFC-10 089505

Square Flat Cover, 1/2" KO KWBC-10 089500

Voltage Partition KVP 089512

Size (in) Part Number Product Code

4 x 1/2 & 4 x 3/4 SVDB-H-10/15 089496

4 x 3/4 & 4 x 1 SVDB-H-15/20 089049

4 x 1/2, 2 x 3/4, 2 x 1 SVDB-H-10/20 089052

8 x 3/4" SVDB-H-15 089065

Hub Size (in) Part Number Product Code

4 x 1/2 SVSB-H-10 089054

4 x 3/4 SVSB-H-15 089053

Concrete Wall Box

3-1/2" Deep Boxes

2" Shallow Boxes

• Fully assembled and installation ready

• Perfectly suited for deep or shallow construction preferences

• Concrete-tight poly film covering the box opening

• Kwikon hubs do not protrude inside the box

• Clear Vue vacuum formed removable covers

Floor Box Stand Kit

includes FB Box

Is equiped with several height brackets which accommodate

the different rebar and post-tension cable heights and slab

depths found from job-site to job-site.

Product Code Part Number

FBS-KIT

FBS-KIT 077700

For full product selection see page 51

SHORT FORM SAMPLE SPECIFICATIONS 83

82 SHORT FORM SAMPLE SPECIFICATIONS

KWIKON ENT

Short Form Sample Specification

General

References:

Standards referred to in this section are:

• UL 1653 Electrical Nonmetallic Tubing

• NEMA TC-13 Electrical Nonmetallic Tubing

Products

Manufacturers:

Acceptable manufacturers are listed below:

• Electrical Nonmetallic Tubing - Kwikon by IPEX

• Electrical Nonmetallic Tubing Fittings - Kwikon by IPEX

• Electrical Nonmetallic Tubing Boxes - Kwikon by IPEX

All ENT tubing, ENT fittings, ENT boxes and accessories shall be

manufactured by the same company so as to form a complete

ENT system.

ENT systems shall be approved for use in fire resistance rated

concrete floor-ceiling assemblies with fire resistance ratings up

to 4 hours.

Raceways:

ENT raceway shall be color coded to indicate the wiring system.

Blue stripe for power, red stripe for fire alarm/emergency

systems and yellow stripe for data/communications.

ENT raceway shall be listed to UL1653 and manufactured in

accordance with NEMA TC-13.

Fittings:

ENT fittings shall be manufactured of high impact PVC

ENT fittings requirements:

Provide fittings meeting the following requirements:

• Six locking tabs located every 60º proving 360º contact

• Locking tabs shall provide a pullout of a minimum

175 ft-lb force

• Concrete tight without the need for taping

• When transitioning to EMT conduit, the transition fitting

shall have six locking tabs for ENT connection and set-

screw connection for EMT

Boxes:

ENT boxes shall be manufactured of high impact PVC

ENT slab box and wall box requirements:

• Slab boxes shall be approved for the purpose and

concrete-tight

• Round slab boxes shall be approved for use with

luminaries up to 50 lbs. and ceiling fans up to 35 lbs.

• Round slab boxes shall have threaded brass inserts for

the attachment of luminaries or ceiling fans

• Slab boxes shall have eight (8) integrally molded ENT

hub connectors with six locking tabs for ENT raceway

connection

Installation

ENT raceways, fittings, boxes and accessories shall be

installed in accordance with Article 362 of the 2002 National

Electrical code.

Where ENT penetrates a fire rated wall, floor or ceiling

assembly, an approved firestop system as listed in

Underwriters Laboratories Building Materials Directory or other

nationally recognized testing laboratory shall be used.

Not permitted for use where subject to ambient temperatures

in excess of 122ºF (50ºC).

INEXO®ICF BOX 85

INEXO ICF BOX

INEXO®Electrical Boxes - the only approved

electrical box for ICF construction!

Available in commercial and residential styles.

THE INNOVATIVE ELECTRICAL BOX FOR

INSULATED CONCRETE FORM CONSTRUCTION

Insertion depth

of 2-1/4"

Insertion depth

of 2-1/4"

Full flange prevents box

from twisting and

sinking into foam if

over-tightened

Full flange prevents box

from twisting and

sinking into foam if

over-tightened

‘TEETH’ can be

easily removed

and replaced

‘TEETH’ can be

easily removed

and replaced

‘TEETH’ lock in

place providing a

rigid hold in the

EPS foam

‘TEETH’ lock in

place providing a

rigid hold in the

EPS foam

Greater installation versatility

with 3 screw hole choices and

flanges on both sides

Greater installation versatility

with 3 screw hole choices and

flanges on both sides

INEXO provides a 1/2"

drywall setback resulting

in a professional finish

INEXO provides a 1/2"

drywall setback resulting

in a professional finish

Single gang box

provides 19 cubic inch

capacity

Single gang box

provides 19 cubic inch

capacity

INEXO Boxes for ICF Construction

Until now there have been few choices when attempting to provide a truly

professional electrical box solution for Insulated Concrete Form homes.

INEXO’s patented design provides a truly professional solution that

works with your production schedule and provides the quality installation

and finished look that builders require and owners appreciate. INEXO

boxes link seamlessly with existing ICF materials, tools and methods. A

complete offering designed for ICF walls allow builders to standardize

on the use of electrical boxes throughout the building.

Residential (NMD Cable 14/2 – 10/3)

Commercial (AC or NMD Cable)

Description Part Number Product Code

Single Gang ICF-1-RL 220000

Double Gang ICF-2-RL 220001

Triple Gang ICF-3-RL 220002

Description Part Number Product Code

Single Gang ICF-1-CLU 220009

Double Gang ICF-2-CLU 220010

Triple Gang ICF-3-CLU 220011

SUPER DUCT

SUPER DUCT®

SUPERDUCT: Telephone, Power &

Communications Duct

Super Duct is recognized by major utilities, contractors and

engineering firms as the premier ducting product available on

the market.

Super Duct is manufactured with a specialized compound and

engineered for high impact and crush strength specifically

required by utilities for underground duct. This compound

enhances the friction coefficient of Super Duct for easier

pulling of conductors/wires through long runs.

UL 651

NOTES

____________________

8988

SUPER DUCT

ENGINEERING DATA

Field Bending

The natural flexibility of IPEX Super Duct allows field

bending, so minor changes in elevation or direction can

often be accommodated without the use of special sweeps or

fittings. The following table indicates typical maximum

offset bends that can be achieved by “cold bending.”

Offset

Allowable Offset for Super Duct

NOTES:

1. Axial deflection should not be attempted at the joints.

2. The above values were established for ambient temperatures above

the freezing point. Increased radii may be desirable at below-freezing

temperatures.

Size

inches Max Allowable Offset

10' Length (inches) Max Allowable Offset

20' Length (inches)

220 79

314 56

3-1/2 12 49

411 43

5 7 35

6 7 29

ADVANTAGES

Lightweight

Super Duct is easy to carry and install, reducing labor and costs.

Long Lengths

Super Duct is available in 10' and 20' lengths, minimizing the

number of connections needed.

Bell Ends

Super Duct is bell-ended, allowing for easy assembly in the field.

High Compressive Strength

Super Duct’s specially formulated compound is designed to

withstand high loads.

Low Coefficient of Friction

The smooth bore of Super Duct facilitates cable pulling and

eliminates costly cable damage.

Quality Control

Stringent, continuous testing ensures that Super Duct is a

consistently high quality product.

9190

SUPER DUCT

Concrete Encased Monolithic Installation

For multipurpose power cable and communication duct banks,

spacing between ducts is critical for optimum performance.

IPEX offers Vertical Lok Spacer systems to accommodate all

specification and field installations.

These lightweight spacers provide the

vertical and horizontal separation required

in a trench.

With spacers in place on trench bottom,

lay the first tier of ducts. When using a

concrete base, lay the bottom tier before

the base has taken initial set. Place

subsequent tiers of spacers on top of the

tier until the required number of ducts are

installed. Then tie the entire assembly

together. It is not necessary to weight or

brace the bank unless the concrete mix is

very wet.

The Concrete Pour

Do not allow a heavy mass of concrete to fall directly onto the

duct. If this is a possibility, use a plank to direct the concrete

down the sides of the bank assembly to the trench bottom. The

concrete will flow to the center of the bank and rise up in the

middle, uniformly filling all open spaces. Voids can be

eliminated by carefully working a long, flat slicing bar or

spatula up and down between the vertical rows of ducts.

Concrete should then flow between and under all of the ducts.

Duct Bank Elevation

All spacers should be staggered. It is recommended that

spacers should be located approximately one-fifth of duct

length from each end. Vertical Lok spacers should be located

to a maximum of every 5.5 ft.

Backfilling

Backfill with regular excavated soil after the concrete has set.

INSTALLATIONENGINEERING DATA

Bends

Pipe Dia. Radius of Bend (R)

(in) 24" 36" 48" 60"

290° / 45° / 22-1/2°

390° / 45° / 22-1/2°

490° / 45° / 22-1/2°

590° / 45° / 22-1/2°

690° / 45° / 22-1/2°

90° 45° 221/2°

Static Friction Coefficient

Ducting Materials

.0 .1 .2 .3 .4 .5 .6 .7 .8

PVC

RTRC

9392

SUPER DUCT

INSTALLATION

Direct Burial Installation

Trench Bottom

The trench bottom should provide a

continuous, firm and uniform support

for the duct bank construction. Care

should be taken to avoid lumps, ridges,

depressions and stones causing “point”

contacts or uneven bearing.

Rock or Shale

Excavate 3" below the desired depth and bring the trench back

to grade with selected tamped soil. This will provide the duct

with a uniform bedding surface.

Unstable Soils

Tests should be conducted to establish the soil strength in

marshy or swampy areas. It may be necessary in these

conditions to dig deeper and refill with crushed stone or

gravel, or to employ mats, timbers or a concrete base.

Placement of Duct

After the first tier of ducts is installed, backfill and compact

as outlined below. If wood combs are employed for spacing,

remove them as the backfill is placed and tamped. Then begin

the next tier.

Initial Backfilling

1.Fit side and center to the top of the ducts. Use a hand

tamper only to tamp firmly.

2.Backfill over the duct to the required thickness (see note)

and tamp firmly, using only a hand tamper.

Final Backfilling

When the last tier is placed, hand-place the backfill to 4" over

the duct with soil that does not contain stones larger than

3/8". Hand-tamping of this layer is optional, depending on the

specifications.

From this point, backfill may be completed by hand or by

pneumatic tamping in layers from 4" to 12" depending on the

degree of compaction desired.

When placing backfill by machine, avoid the use of large rocks

until a protective layer (minimum of 12") is established.

Note: In direct burial, no spacer should be used with Duct; spacers provide “point” support

instead of the continuous bed required. Backfill thickness between ducts is usually 2" to 3".

INSTALLATION

Concrete Encased Tier-by-Tier

Installation

The advantage of this method is the

production of a solid, void-free concrete

envelope. Simply pour each tier

independently.

Trench Bottom

After grading the trench, place a foundation of 3" of concrete

on the bottom. It should be smooth and graded.

Bank Assembly

Lay the bottom tier of ducts on the

concrete base. Ducts should be spaced

with wooden combs (two per duct

length). Concrete the first tier level to

the top of the comb. Remove combs

and fill the voids. Light tamping will

ensure an even surface. Repeat this

sequence until the bank is built up.

Concreting

If the concrete is allowed to set before assembling the next

tier, the concrete will be stronger and more dense and the

ducts will be aligned straighter. One problem with this method

is that the bank will be in a

series of layers and therefore more

likely to heave and

separate under frost conditions. If

successive tiers are laid before the concrete has set, a

satisfactory bond will be achieved by tamping the dry concrete.

Backfilling

Backfill with regular excavated soil when the bank is complete.

Duct is usually laid in 100' sections once the trench is

excavated. Therefore, concreting can be a continuous process.

Cross-section of

tier-by-tier method.

Type of wood comb used.

100'

100' 100'

100'

9594

SUPER DUCT

POWER & COMMUNICATION DUCT

Type EB-20

Rated For 90°C Cable / 20-Foot Length, Belled One End

Nominal

Size (in) Product

Code Average

OD Min. Wall Feet/Pallet Approx.

Wt/lbs

2008821 2.375 0.060 3,520 37

3008831 3.500 0.061 1,560 56

*4 008841 4.500 0.082 1,200 93

*5 008851 5.563 0.103 460 142

*6 008861 6.625 0.125 520 202

* UL Listed

Type DB-60

Rated For 90°C Cable / 20-Foot Length, Belled One End

Nominal

Size (in) Product

Code Average

OD Min. Wall Feet/Pallet Approx.

Wt/lbs

2008321 2.375 0.060 3,520 37

3008731 3.500 0.092 1,560 80

4008741 4.500 0.121 1,200 132

5008751 5.563 0.152 460 202

6008761 6.625 0.182 520 285

Type EB-35

Rated For 90°C Cable / 20-Foot Length, Belled One End

Type DB-120 Duct

Rated For 90°C Cable / 20-Foot Length, Belled One End

Nominal

Size (in) Product

Code Average

OD Min. Wall Feet/Pallet Approx.

Wt/lbs

2008921 2.375 0.060 3,520 33

3008931 3.500 0.076 1,560 64

4008941 4.500 0.100 1,200 105

5008951 5.563 0.126 460 161

6008961 6.625 0.152 520 230

Nominal

Size (in) Product

Code Average

OD Min. Wall Feet/Pallet Approx.

Wt/lbs

2008621 2.375 0.077 3,520 42

3008631 3.500 0.118 1,560 96

4008641 4.500 0.154 1,200 158

5008651 5.563 0.191 460 240

6008661 6.625 0.227 520 336

PVC Plastic Compounds.

Plastic Utilities Duct for Underground

Installation.

Smooth-Wall Poly (Vinyl-Chloride) (PVC)

conduit and Fittings for Underground

Installation.

ASTM D1784, ASTM F512

NEMA TC-6

95 POWER & COMMUNICATION DUCT

TELEPHONE DUCT

PVC Telephone Duct -

20 foot Length, Belled One End

Nominal

Size Product

Code Type Average

OD Min.

Wall Min.

ID Feet /

Pallet Approx.

lbs/ft

4008040 B4.350 0.091 4.13 1,260 1.0

4008041 B (HW) 4.350 0.101 4.11 1,260 1.1

4008042 C4.350 0.148 4.00 1,260 1.6

4008043 C X 10' 4.350 0.148 4.00 630 1.6

4008044 D4.350 0.148 4.00 1,260 1.6

Performance Properties

As indicated under Telephone Standard 8546

Telephone Duct

Type B, Type B(HW), Type C, Type D

Telephone Duct Type B and Type B – Heavy Wall are designed

for use in concrete-encased installations.

Telephone Duct Type C is designed for direct burial applications.

Telephone Duct Type D is designed for exposed and special

applications, and contains 6% titanium oxide for UV resistance.

Minimum

Impact Resistance Minimum Pipe

Stiffness Heat Distortion

48 hrs @ 140°F

Type @ 73.4ºF @ 32ºF Type lbs/in/in Type Load Max decr.

B50 ft.lbs. 25 ft.lbs. B30 B15 0.250"

B(HW) 50 ft.lbs. 25 ft.lbs. B (HW) 40 B (HW) 15 0.250"

C100 ft.lbs. 50 ft.lbs. C120 C60 0.250"

D150 ft.lbs. 75 ft.lbs. D120 D60 0.250"

SCEPTACON

SCEPTACONTM TRENCHLESS RACEWAY SYSTEMS

SceptaConTM Trenchless Raceway Systems

SceptaCon is one of the first PVC systems designed for the

rigors of trenchless applications. It links seamlessly to existing

PVC conduit infrastructures and allows utility companies to

standardize on PVC throughout their entire electrical systems.

SceptaCon's slide-in locking system and pre-installed, pre-

lubricated gaskets allow contractors to create a water-tight seal

by hand in seconds - in all temperatures - without having to

worry about solvents or chemicals freezing or drying too quickly.

Its unique spline-lock snaps into a recessed opening, ensuring

the spline won't get snagged during pull-through. SceptaCon's

rounded bell shoulders slide easily past roots, rocks and other

debris in the borehole, ensuring a smooth, easy installation.

And because SceptaCon is made to the same high standards as

our Scepter rigid PVC conduit, contractors and electrical

utilities can be assured of the same level of quality - above

ground and below.

&MUCH MORE ...

DOWNLOAD

OUR ELECTRICAL CATALOG

OR OUR SCEPTER

ELECTRICAL CATALOG

ONLINE TRAINING

TECHNICAL DOCUMENTS

PRODUCT INFO

Visit our website:

www.ipexamerica.com

Riser / Resi Straps

Size Part Number Product Code

3/4" KPS075 132006

1" KPS100 132007

1-1/4" KPS125 132008

1-1/2" KPS150 132009

2" KPS200 132010

Conduit Clamp & Spacers

Size (in) Part Number Product Code

1/2 CCS10 077794

3/4 CCS15 077796

1 CCS20 077797

1-1/4 CCS25 077798

1-1/2 CCS30 077799

2 CCS35 077800

Strut Base CCS-B 077343

The Conduit Clamp and Spacers are

engineered to accommodate proper

expansion and contraction of conduits and

to prevent unwanted clamp opening.

Manufactured of the same material as

Riser/RESI raceway, Kwikpath pipe straps

allow for compliance with installation requirements providing

for the proper support of Riser/RESI raceways.

KWIKPATH®COMMUNICATION RACEWAY SYSTEMS

SCEPTACON

SCEPTACONTM TRENCHLESS RACEWAY SYSTEMS

No Cementing or Lubrication

SceptaCon’s slide-in locking system and

pre-installed, pre-lubricated gaskets allow

contractors to create a water-tight seal by

hand in seconds.

Outperforms Other PVC

Products

SceptaCon’s unique spline-lock snaps into

a recessed opening, ensuring the spline

won’t get snagged during pull-through.

SceptaCon’s rounded bell shoulders slide

easily past roots, rocks and other debris in

the borehole, ensuring a smooth, easy

installation.

No Fusion Required

Because SceptaCon’s joints can be quickly

joined by hand in seconds, crews don’t

need large, expensive fusion equipment or

special training to create water-tight joints.

In addition, SceptaCon can be assembled

one pipe length at a time, then pulled

underground, eliminating the need for long

strings of pipe on the job.

Superior Performance

SceptaCon is made from durable schedule 40 PVC that’s

resistant to creasing, scoring or flattening when pulled past

obstructions in the borehole, yet flexible enough to bend with

underground twists and turns. SceptaCon remains round,

unlike HDPE which can stretch and become oval.

Easy to Handle

SceptaCon is available in

convenient 10' and 20'

lengths that are light-

weight, easy to handle and

no problem to work with in

all types of weather.

Length Product Code

2" x 20' 106221

3" x 10' 106330

3" x 20' 106331

4" x 10' 106340

4" x 20' 106341

5" x 10' 106350

5" x 20' 106351

6" x 10' 106360

6" x 20' 106361

SCEPTACONTM TRENCHLESS RACEWAY SYSTEMS

SCEPTACON

NOTES

____________________

NOTES

____________________

NOTES

____________________

Indoor use primarily to provide protection

against contact with the enclosed equipment

and against a limited amount of falling dirt.

Indoor use to provide a degree of protection

against limited amounts of falling water and dirt.

Outdoor use to provide a degree of protection

against windblown rain; undamaged by the

formation of ice on the enclosure.

Either indoor or outdoor use to provide a

degree of protection against falling rain,

splashing water, and hose-directed water;

undamaged by the formation of ice on the

enclosure.

Either indoor or outdoor use to provide a

degree of protection against falling rain,

splashing water, and hose-directed water;

undamaged by the formation of ice on the

enclosure; resists corrosion.

Indoor or outdoor use primarily to provide a

degree of protection against hose-directed

water, the entry of water during prolonged

submersion at a limited depth, and be

undamaged by the formation of ice on the

enclosure.

Indoor use to provide a degree of protection

against dust, dirt, fiber flyings, dripping water,

and external condensation of noncorrosive

liquids.

Indoor use to provide a degree of protection

and spraying of water, oil, and noncorrosive

liquids.

1 2 3 4 5 6 7 8

TYPE

DESIGNATION UL UNDERWRITERS LABORATORIES INC

(UL 50 AND UL 508)

This material is reproduced with permission from Underwriters

Laboratories Inc. Standard for Safety for Cabinets and Boxes, UL

Underwriters Laboratories Inc. (UL) shall not be responsible to

anyone for the use of or reliance upon a UL Standard by anyone.

UL shall not incur any obligation or liability for damages,

including consequential damages, arising out of or in connection

with the use, interpretation of, or reliance upon a UL Standard.

Company

Name

Title

Address

City State Zip

Phone ext.

Fax E-mail / Website

This is a:

❏ Home Address ❏ Business Address ❏ Jobsite Address

Business Type:

(check 1 or 2 that best apply)

Company Classification:

❏ Distributor/Wholesaler

❏ Engineering Firm

❏ Contractor

❏ Government

❏ OEM - Products Manufactured:_______________________

❏ Other:_____________________________________________

SIC or industry sector:__________________________________

My primary markets are (check all that apply):

Tel: (905) 403-0264

Toll Free: (800) 463-9572

Fax: (905) 403-1124

Website: www.ipexamerica.com

IPEX

2441 Royal Windsor Drive

Mississauga, Ontario, Canada

L5J 4C7

PLEASE PRINT

Fax this form to (905) 403-1124 and we’ll add

you to our mailing list.

❏ Commercial

❏ Residential

❏ Industrial

❏ Other:_________________

❏ Utility

❏ OEM

❏ Institutional

This literature is published in good faith and is believed to be reliable.

However, it does not represent and/or warrant in any manner the

information and suggestions contained in this brochure. Data presented is

the result of laboratory tests and field experience.

A policy of ongoing product improvement is maintained. This may result

in modifications of features and/or specifications without notice.

Customers call

IPEX USA LLC

Toll free: (800) 463-9572

www.ipexamerica.com

CUSTOMER SERVICE CENTER

www.ipexamerica.com

DISTRIBUTED BY:

Products manufactured by IPEX Electrical Inc. and distributed in the United

States by IPEX USA LLC.

INEXO®, Kwikflex®, Kwikon®, SceptaConTM, SceptalightTM and SuperDuct®are

trademarks of IPEX Branding Inc. Pocket Pro

ELECTRICAL SYSTEMS

Trenchless Raceways Systems

® TMTM

www.ipexamerica.com

About the IPEX Group of Companies

As leading suppliers of thermoplastic piping systems, the IPEX Group of

Companies provides our customers with some of the world’s largest and most

comprehensive product lines. All IPEX products are backed by more than

50 years of experience. With state-of-the-art manufacturing facilities and

distribution centers across North America, we have established a reputation

for product innovation, quality, end-user focus and performance.

Markets served by IPEX group products are:

•Electrical systems

•PVC, CPVC, PP, PVCO, ABS, PEX, FR-PVDF and PE pipe and fittings (1/4"

to 48")

•Industrial process piping systems

•Municipal pressure and gravity piping systems

•Plumbing and mechanical piping systems

•PE Electrofusion systems for gas and water

•Industrial, plumbing and electrical cements

•Irrigation systems

638059 Catalog

26099-Catalog 26099-Catalog 26099-Catalog 622454 Batch7 unilog cesco-content

Navigation menu

Versions of this User Manual:

Views

Navigation