Baldor DC Motor Controls MotionUSA Your Source For High Speed And Precision
2014-11-11
: Pdf 648049-Attachment 648049-Attachment 781568 Batch12 unilog
Open the PDF directly: View PDF 
.
Page Count: 24
238
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
1/4 thru 5 Hp NEMA 56C thru 1810ATC
Applications: Conveyors, mixers, packaging machinery.
Features: NEMA C-face with removable base. Tach adaptable. Class F
insulation, double sealed ball bearings. 20:1 constant torque speed range.
UL and CSA recognized. 1/4 - 1/2 Hp motors are TENV, all others are
TEFC. No dual mounting base holes on 1/4 - 1/2 Hp.
NOTE: See Tach Generators on page 254 and Mounting Kits on page 255. (a) See notes on inside back flap.
SCR Drive Permanent
Magnet Motor -
TENV and TEFC, C-Face
with Base
1/50 thru 1/4 Hp
Applications: General purpose including conveyors, material
handling equipment and packaging machinery.
Features: High quality ball bearing motors with precision machined
die cast aluminum or steel housings. Dynamically balanced for
smooth, vibration-free operation.
Subfractional Permanent
Magnet DC Motor - TENV,
Rigid Base
NOTE: Supplied with type SJO, three foot 18/3 AWG grounded cord. (a) See notes on inside back flap.
Input
Motor
Hp
Output
Base
Speed
Voltage
Direct Current
Armature
Full Load
Amperage
Armature
Catalog
Number
List
Price
Mult.
Sym. Gear Style
Ap’x.
Shpg.
Wgt.
Notes (a)
1/50 1800 90 0.3 AP231001 294 DS 2308P 4 20,60
1/25 1725 90 0.5 AP232001 322 DS 2314P 5 20,60
1/15 1800 90 0.8 AP233001 346 DS 2318P 5 20,60
180 0.4 AP233021 346 DS 2318P 5 20,60
1/8 1725 90 1.3 AP7401 484 DS 2424P 12 20,60
180 0.7 AP7421 484 DS 2424P 12 20,60
1/4 3450 90 2.5 AP7402 484 DS 2424P 12 20,60
180 1.3 AP7422 484 DS 2424P 12 20,60
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Enclosure Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a) Reliance
M/N
Arm. Arm.
1/4 1750 56C 90 2.5 TENV CDP3310 695 K 24 20,60 T56S1001
180 1.25 TENV CDP3306 695 K 23 20,60
1/3 1750 56C 90 3.2 TENV CDP3320 733 K 27 20,60 T56S1003
180 1.6 TENV CDP3316 733 K 27 20,60
1/2 1750 56C 90 4.8 TENV CDP3330 820 K 32 20,60 T56S1005
180 2.5 TENV CDP3326 820 K 31 20,60 T56S1027
2500 56C 90 5 TENV CDP3335 733 K 26 20,60 T56S1006
3/4 1750 56C 90 7.6 TEFC CDP3440 996 K 38 20 T56S1009
180 3.7 TEFC CDP3436 996 K 38 20 T56S1029
2500 56C 90 7.5 TEFC CDP3443 881 K 36 20
1
1750 56C 90 10 TEFC CDP3445 1,211 K 44 20 T56S1011
180 5 TEFC CDP3455 1,211 K 44 20 T56S1013
2500 56C 90 9.7 TEFC CDP3450 996 K 38 20
180 4.85 TEFC CDP3460 996 K 38 20 T56S1012
1 1/2 1750 145TC 180 7.7 TEFC CDP3575 2,231 L1 65 20
2500 145TC 180 7 TEFC CDP3580 1,941 L1 53 20
21750 145TC 180 9.6 TEFC CDP3585 2,662 L1 74 20
2500 145TC 180 10 TEFC CDP3590 2,231 L1 66 8
31750 182TC 180 14 TEFC CDP3603 3,278 L1 112 20
1750 182C 180 14 TEFC CDP3604 3,260 L1 112 20
5 1810ATC 180 21.6 TEFC CDP3605 5,564 L1 161 20
239
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
1/4 thru 5 Hp NEMA 56C thru 1810ATC
Applications: Conveyors and metering pumps (precise speed regulation).
Features: Provides an integral 50 VDC per 1000 RPM precision tachometer
for closed loop drive system. Class F insulation. 20:1 constant torque
speed range with NEMA Type K control. 1/4 - 1/2 motors are TENV, all others
are TEFC.
Integral DC Tach
Permanent Magnet SCR
Drive Motor -
TENV and TEFC,
C-Face with Base
1/4 thru 1 1/2 Hp NEMA 56C thru 145TC
Applications: Conveyors, feeders, and pumps (adjustable speed and
constant torque for hazardous locations).
Features: NEMA C-Face with welded on base. 20:1 constant torque speed
range. UL and CSA. Division 1, Class I, Group D; Class II, Group F & G,
T3C. Thermostat and explosion proof conduit box included.
Not tach adaptable.
Explosion Proof
Permanent Magnet SCR
Drive Motor - TEFC,
C-Face with Base
② Class I, Group D; Class II, Group F&G
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Enclosure Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Arm.
1/4 1750 56C 90 2.5 TENV CDPT3310 1,984 K 27 20,60
180 1.25 TENV CDPT3306 1,984 K 27 20,60
1/3 1750 56C 90 3.2 TENV CDPT3320 2,024 K 30 20,60
180 1.6 TENV CDPT3316 2,024 K 30 20,60
1/2 1750 56C 90 4.8 TENV CDPT3330 2,151 K 35 20,60
180 2.5 TENV CDPT3326 2,151 K 36 20,60
3/4 1750 56C 90 7.6 TEFC CDPT3440 2,275 K 44 20
180 3.7 TEFC CDPT3436 2,275 K 45 20
1 1750 56C 90 10 TEFC CDPT3445 2,538 K 50 20
180 5 TEFC CDPT3455 2,538 K 50 20
1 1/2 1750 143TC 180 7.7 TEFC CDPT3575 3,523 L1 71 20
2 1750 143TC 180 9.6 TEFC CDPT3585 3,953 L1 79 20
3 1750 182ATC 180 14 TEFC CDPT3603 4,598 L1 122 20
5 1750 1810ATC 180 24.5 TEFC CDPT3605 6,878 L1 164 20
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
XP
Cls/Grp
Temp
Code
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Arm.
1/4 1750 56C 90 2.7 CDPX3410 ②T3C 1,907 K 38 20, 59
180 1.3 CDPX3406 ②T3C 1,907 K 38 20, 59
1/3 1750 56C 90 3.6 CDPX3420 ②T3C 2,396 K 43 20, 59
180 1.7 CDPX3416 ②T3C 2,396 K 44 20, 59
1/2 1750 56C 90 5.2 CDPX3430 ②T3C 2,705 K 46 20, 59
180 2.5 CDPX3426 ②T3C 2,705 K 46 20, 59
3/4 1750 56C 90 7 CDPX3440 ②T3C 3,344 K 51 20, 59
180 3.5 CDPX3436 ②T3C 3,344 K 51 20, 59
1 1750 56C 90 9.6 CDPX3545 ②T3C 4,454 K 73 20, 59
180 4.9 CDPX3555 ②T3C 4,454 K 71 20, 59
1 1/2 1750 145TC 180 7.1 CDPX3575 ②T3C 4,761 L1 81 20, 59
(a) See notes on inside back flap.
CAUTION: Explosion-proof motors have a tight fit between mating parts to ensure the integrity of the explosion-proof enclosure. This can lead to an accumulation of
moisture inside the motors due to condensation. Care should be used when selecting an explosion-proof motor, especially when installed outdoors and on intermittent duty.
240
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
Washdown Duty
Permanent Magnet SCR
Drive Motor - TENV and
TEFC, C-Face
with Base
1/4 thru 5 Hp NEMA 56C thru 1810ATC
Applications: Food processing conveyors and feeders exposed to high
pressure wash down.
Features: Moisture sealant on bolt heads between frame and endplates,
neoprene gasketed conduit box. Double sealed ball bearings. Forsheda®
running contact v-ring slinger. Stainless steel shaft. Electrostatic epoxy
paint coating. Class F insulation. 20:1 constant torque speed range.
Tach adaptable. 3300P motors are TENV, all others are TEFC.
NOTE: See Tach Generators on page 254. Mounting kits on page 255.
(a) See notes on inside back flap.
1/4 thru 1 Hp NEMA 56C
Applications: Food processing, packaging exposed to high pressure
washdown with caustic solutions.
Features: Class F insulation; 20:1 constant torque speed range.
Moisture resistant 200°C magnet wire. Sealed ball bearings with moisture
resistant grease. Contact lip seals on shaft extensions. Neoprene gaskets.
Special processed endplates. 300 series stainless steel motor frame, base,
shaft and hardware. No exterior paint. Not tach adaptable.
Paint Free Washdown
Duty Permanent Magnet
SCR Drive Motor, TEFC,
C-Face with Base
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Enclosure Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Arm.
1/4 1750 56C 90 2.5 TENV CDPWD3310 900 K 25 20,60
180 1.25 TENV CDPWD3306 900 K 24 20,60
1/3 1750 56C 90 3.2 TENV CDPWD3320 950 K 27 20,60
180 1.6 TENV CDPWD3316 950 K 27 20,60
1/2 1750 56C 90 4.8 TENV CDPWD3330 1,068 K 32 20,60
180 2.5 TENV CDPWD3326 1,068 K 32 20,60
3/4 1750 56C 90 7.6 TEFC CDPWD3440 1,289 K 38 20
180 3.7 TEFC CDPWD3436 1,289 K 38 20
1 1750 56C 90 10 TEFC CDPWD3445 1,572 K 44 20
180 5 TEFC CDPWD3455 1,572 K 44 20
1 1/2 1750 145TC 180 7.7 TEFC CDPWD3575 3,008 L1 66 20
2 1750 145TC 180 9.6 TEFC CDPWD3585 3,590 L1 75 20
3 1750 182TC 180 14 TEFC CDPWD3603 4,595 L1 116 20
5 1750 1810ATC 180 24.5 TEFC CDPWD3605 7,783 L1 157 20
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Arm.
1/4 1750 56C 90 2.7 CDPSWD3410 1,077 K 29 20
180 1.3 CDPSWD3406 1,077 K 28 20
1/2 1750 56C 90 5.2 CDPSWD3430 1,276 K 37 20
180 2.5 CDPSWD3426 1,276 K 38 20
1 1750 56C 90 9.6 CDPSWD3545 1,886 K 63 20
180 4.9 CDPSWD3555 1,886 K 63 20
(a) See notes on inside back flap.
241
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Metric Flange
Permanent Magnet
SCR Drive Motor, TENV
and TEFC, Flange and
Face Mount
0.15 thru 5 kW IEC D63 thru D112D
0.2 thru 3.7 Hp
Applications: Metric SCR Drive Motor replacement.
Features: Metric Flange or C-Face per IEC 60072-1 Standards. Bolt on
non-metric base. Class F insulation. Tach adaptable except type 15kW. 20:1
constant torque speed range. Conforms to IEC 60034-1.
NOTE: Above motors D71 and larger with B5 flange, fitted with oil seal. Catalog numbers VP7424D and VP7424-14 are not tach adaptable.
Tach Generators are shown on page 254. Tach Mounting Kits are shown on page 255.
(a) See notes on inside back flap.
kW/Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Enclosure
Catalog
Number List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Arm.
B5 Flange
.15/.20 1800 D63D 180 1.1 TENV VP7424D 485 DS 10 60
.18/.25 1750 D71D 180 1.25 TENV VP3311D 695 K 23 20,60
.25/.33 1750 D71D 180 1.6 TENV VP3316D 733 K 27 20,60
.37/.5 1750 D71D 180 2.5 TENV VP3326D 820 K 31 20,60
3000 D71D 180 2.5 TEFC VP3428D 850 K 33 20
.57/.75 1750 D80D 180 3.7 TEFC VP3436D 996 K 40 20
3000 D80D 180 3.6 TEFC VP3439D 881 K 37 20
.75/1 1750 D80D 180 5 TEFC VP3455D 1,211 K 46 20
3000 D80D 180 5.1 TEFC VP3458D 996 K 41 20
1.1/1.5 3000 D90D 180 7.7 TEFC VP3468D 1,110 L1 47 20
1750 D90D 180 7.7 TEFC VP3575D 2,244 L1 71 20
1.5/2 1750 D90D 180 9.6 TEFC VP3585D 2,677 L1 78 20
3000 D90D 180 10 TEFC VP3588D 2,244 L1 69 20
2.2/3 1750 D112D 180 14 TEFC VP3603D 3,294 L1 121 20
3.7/5 1750 D112D 180 24.5 TEFC VP3605D 5,592 L1 166 20
B14 Face
.15/.20 1800 D63D 180 1.1 TENV VP7424-14 485 DS 10 60
.18/.25 1750 D71C 180 1.4 TEFC VP3411-14 781 K 30 20
.25/.33 1750 D71C 180 1.7 TEFC VP3416-14 832 K 31 20
1.37/.50 3000 D71C 180 2.5 TEFC VP3428-14 850 K 31 20
1750 D71C 180 2.5 TEFC VP3426-14 881 K 37 20
.56/.75 3000 D80C 180 3.6 TEFC VP3439-14 881 K 35 20
1750 D80C 180 3.7 TEFC VP3436-14 996 K 40 20
.75/1 3000 D80C 180 5.1 TEFC VP3458-14 996 K 38 20
1750 D80C 180 5 TEFC VP3455-14 1,211 K 45 20
1.1/1.5 3000 D80C 180 7.7 TEFC VP3468-14 1,110 L1 43 20
1750 D90C 180 7.7 TEFC VP3575-14 2,244 L1 73 20
1.5/2 3000 D90C 180 10.0 TEFC VP3588-14 2,244 L1 70 20
1750 D90C 180 9.6 TEFC VP3585-14 2,677 L1 80 20
242
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
1/3 thru 1 1/2 Hp NEMA 56 thru 184
Applications: Cranes, hoists, conveyors, augers and marine duty
DC applications. Powered from generators or batteries.
Features: 20% Compound Wound. Weather proof, meets IEEE 45
specifications. Suitable for mounting in any position. Continuous duty.
Easy access brushes. Not tach adaptable.
DC Power Motor -
TEFC, Rigid Base
NOTE: Not for SCR control applications. Base welded on 3513D type only. Not tach adaptable.
(a) See notes on inside back flap.
1/4 thru 1 Hp NEMA 56C
Applications: Battery operation for portable pumps, fans, augers,
winches and lifts.
Features: NEMA C-face, Class F insulation, double sealed ball bearings.
Top-mounted terminal studs for power connection on ratings 40-amps and
up. Not tach adaptable. 1/4 - 1/2 Hp are TENV, 3/4 - 1 Hp are TEFC.
Low Voltage Permanent
Magnet Motor -
TENV and TEFC
Hp Speed NEMA
Frame
Rated
Current
Catalog
Number
List
Price
Mult.
Sym.
Ap'x
Shpg.
Wgt.
Notes (a)
115 VDC
1/3 1750 56 3.2 D1151 1,358 K 23 20
1/2 1750 56 4.8 D1152 1,452 K 29 20
3/4 1750 56 6.6 D1153 1,705 K 34 20
1 1750 56 8 D1154 2,005 K 62 20
230 VDC
1/3 1750 56 1.7 D2301 1,358 K 41 20
1/2 1750 56 2.1 D2302 1,455 K 29 20
3/4 1750 56 3.3 D2303 1,705 K 34 20
1 1750 56 4 D2304 2,005 K 62 20
1 1/2 1750 184 6.1 D2305 3,521 L1 84 20
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
1/4 1800 56C 12 22.5 CDP3410-V12 747 K 23 20,60
24 10.6 CDP3410-V24 708 K 23 20,60
1/3 1800 56C 12 28.6 CDP3420-V12 820 K 31 20,60
24 13.6 CDP3420-V24 782 K 31 20,60
1/2 1800 56C 12 40 CDP3430-V12 850 K 37 20,60
24 19.6 CDP3430-V24 810 K 35 20,60
3/4 1800 56C 12 66 CDP3440-V12 1,220 K 42 20
56CZ 24 29.4 CDP3440-V24 845 K 41 20
1 1800 56C 12 85.6 CDP3445-V12 1,765 K 45 20
24 34.2 CDP3445-V24 1,757 K 46 20
(a) See notes on inside back flap.
243
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
1/4 thru 3 Hp NEMA 56C thru 215C
Applications: Conveyors, printing, textile equipment, machine tools
(adjustable speeds with constant torque).
Features: Designed for use with NEMA Type K SCR control, 20:1 constant
torque speed range (except where noted). NEMA C-face and removable
base. NEMA 182 frame and larger have a normally closed thermostat on the
field winding. Class F insulation, 1.0 service factor.
Shunt Wound
SCR Drive Motors,
TEFC, C-Face with Base
NOTE: See Tach Generators on page 254 and Mounting Kits on page 255. Tach Mounting Kits are not available for explosion-proof motors.
(a) See notes on inside back flap. (b) Base welded on type 3513D only. (c) No dual mounting base holes on 35D, 75D or 91D type.
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Field Arm. Field
1/4 1750 56C 90 100/50 3 .3/.6 CD3425 699 K 23
1/3 1750 56C
90 100/50 3.4 .4/.8 CD3433 764 K 24
180 200/100 1.9 .21/.42 CD3434 764 K 24
90 100/50 3.7 .5/1 CD5333 (b)(c) 1,101 K 31
1/2 1750 56C
90 100/50 5.7 .5/1 CD3450 868 K 29
180 200/100 2.6 .25/.5 CD3451 868 K 29
90 100/50 5 .44/.88 CD5350 (c) 1,216 K 38
3/4 1750 56C
90 100/50 7.8 .6/1.2 CD3475 1,080 K 34
180 200/100 3.9 .3/.6 CD3476 1,080 K 34
90 100/50 8 .6/1.2 CD5375 (c) 1,432 K 45
1 1750
56C 180 200/100 5 .3/.6 CD5318 (c) 1,525 K 54
90 100/50 10 .6/1.2 CD5319 (c) 1,525 K 53
182C 180 200/100 5 .25/.5 CD6218 2,037 L1 65
90 100/50 9.6 .55/1.1 CD6219 2,037 L1 66
1 1/2 1750 182C 180 200/100 7.5 .25/.5 CD6215 2,281 L1 84
2 1750 182C 180 200/100 9.5 .4/.8 CD6202 2,698 L1 98
213C 180 200/100 9.5 .4/.8 CD7502 4,734 L1 105
3 1750 184TC 180 200/100 14.7 .6/1.2 CD6203 3,064 L1 135 8, 73
215C 180 200/100 14.7 .6/1.2 CD7503 5,035 L1 137
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
XP
Cls/Grp
Temp
Code
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes (a)
Arm. Field Arm. Field
Explosion-Proof - Continuous Duty - Division 1, Class I, Group D & Class II, Group F & G - 1.0 S.F.
1/2 1750 182CZ 90 100/50 4.9 .55/1.1 CDX1850 (b) ②T3B 2,768 L1 100
3/4 1750 182CZ 90 100/50 7 .55/1.1 CDX1875 (b) ②T3B 3,666 L1 100
1 1750 182CZ 180 200/100 5 .25/.5 CDX2001 (b) ②T3B 4,560 L1 102
182C 180 200/100 5 .25/.5 CDX7100 ②T3B 3,785 L1 102
1 1/2 1750 182C 180 200/100 7.5 .25/.5 CDX7150 ②T3B 5,012 L1 121
2 1750 182C 180 200/100 9.5 .4/.8 CDX7200 (b) ②T3B 5,629 L1 135
1/2 thru 2 Hp NEMA 182CZ thru 182C
Applications: Conveyors, printing, textile equipment, machine tools
(adjustable speeds with constant torque).
Features: Designed for use with NEMA Type K SCR control, 20:1 constant
torque speed range. Normally closed thermostat on the field winding. Class
F insulation, 1.0 service factor. UL and CSA Division 1, Class I, Group D,
Class II, Group F & G.
Shunt Wound
SCR Drive Motors,
Explosion Proof
TEFC, C-Face with Base
CAUTION: Explosion-proof motors have a tight fit between mating parts to ensure the integrity of the explosion-proof enclosure. This can lead to an accumulation of
moisture inside the motors due to condensation. Care should be used when selecting an explosion-proof motor, especially when installed outdoors and on intermittent duty.
(a) See notes on inside back flap. ② Class I, Group D; Class II, Group F&G
(b) Refers to shaft and/or face mounting dimensions only. Base mounting dimensions and shaft height differ from NEMA frames shown. Go to www.baldor.com for details.
244
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
1.5 thru 5 Hp NEMA 189ATY thru 2112ATCZ
Applications: Metals, paper, web processes, extruders, cranes, conveyors,
packaging, printing, machine tools.
Features: Unique laminated square frame for improved commutation on
rectified power supplies. The square configuration allows for increased
rating per frame size. Class F rated insulation system. Service Line brushes
with convenient wear indicating reference lines. PLS™ (Positive Lubrication
System) for longer bearing and motor life. F-3 mounting. Tach adaptable with
thermostat.
RPM III DC Shunt
Wound SCR Drive
Motors, 180V Armature
Power Code K
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Enclosure Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Reliance
M/N
Field
Type
XPY
Tach Kit
Arm. Field Arm. Field (a)(b)
1.5 1750 DC189ATY (c) 180 100/200 7.2 0.721 TENV D1815R 6,040 N2 169 T18R1119 STR 413336-1R
2 1750 DC189ATY (c) 180 100/200 9.5 0.72 TENV D1802R 6,040 N2 86 T18R1117 STR 413336-1R
3 1750
DC1811ATCZ (d) 180 100/200 14.1 1.21 TENV CD1803R 9,906 N2 212 T18R1102 STR 413336-1R
DC189ATY (c)(e) 180 100/200 14.8 0.946 DPG D1803R 6,040 N2 165 T18R1118 STR 413336-1R
DC189ATCZ (d)(e) 180 100/200 14.8 0.946 DPG CDD1803R 6,040 N2 160 T18R1120 STR 413336-1R
5 1750 DC1810ATCZ (d)(e) 180 100/200 24 1.67 DPG CD1805R 7,266 N2 175 T18R1105 STR 413336-1R
DC2112ATCZ (d) 180 100/200 23 1.3 TENV CD2105R 14,534 N2 355 T21S1101 STR 413336-1R
Hp Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Enclosure
*
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Reliance
M/N
Field
Type
XPY
Tach Kit
Arm. Field Arm. Field (a)
3 1750/2300 C1811ATCZ (b) 240 240 11 0.994 SPG CD2003R-2 11,067 N2 198 T18R1009 STAB 413336-1R
5 1750/2300 C1811ATCZ (b) 240 240 18.1 1.11 SPG CD2005R-2 11,067 N2 209 T18R1010 STAB 413336-1R
7.5 1750/2300 C1812ATCZ (b) 240 240 27 1.4 SPG CD2007R-2 12,042 N2 235 T18R1011 STAB 413336-1R
10 1750/2300 SC2113ATCZ (c) 240 240 37 2.18 SPG D2010R-2 16,661 N2 346 T21S1001 STAB 417708-21
3 thru 10 Hp NEMA 1811ATCZ thru 2113ATCZ
Applications: Textile range drives, roofing machines, tube mills, and similar
applications.
Features: Range drive motors have matched IR drops within approximately
5 volts and good regulation characteristics out to the maximum field
weakened speed of 2300 rpm. Capable of operation at 25% base speed with
67% armature current and motor field pre-weakened to 2100 rpm. Specially
designed for use on multi-motor drives operating on a common voltage power
supply such as textile range drives, roofing machines, tube mills, etc.
F-1 mounting. Tach adaptable with thermostat.
* Splash-Proof Guarded (SPG) is an open machine in which the ventilating
openings are so constructed that successful operation is not interfered with
when drops of liquid or solid particles strike or enter the enclosure at any
angle not greater than 60 degrees downward from the vertical.
RPM III DC Shunt
Wound SCR Drive
Motors, 240V Armature
240V Field, Power
Code C
NOTE: Encoder and tachometer kits on page 248.
(a) Field amps at 25°C
(b) Field amps for high voltage connection
(c) 140TC C-face
(d) 180TC C-face
(e) Top mounted conduit box, if blower added, blower must be mounted F-1 or F-2.
NOTE: Encoder and tachometer kits on page 248.
(a) Field amps at 25°C
(b) 180TC C-face
(c) 210TC C-face
245
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Hp Base/Max
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes Reliance
M/N
Field
Type
XPY
Tach Kit
Arm. Field Arm. Field (a)(b)
5 1750/2300 C1812ATZ 240 150 18.5 1.79 D2505R 13,081 N2 251 87 T18R1005 (d) STAB 417709-17
SC2113ATZ 500 150/300 9 1.05 D5505R 15,311 N2 340 87 T21S201 (c) STAB 417708.21
7.5 1750/2300 SC2113ATZ 240 150 27 3.26 D2507R 17,059 N2 359 87 T21S301 STAB 417709-65
SC2113ATZ 500 150/300 13.5 1.41 D5507R 17,059 N2 360 87 T21S302 (d) STAB 417709-65
10 1750/2300 MC2113ATZ 240 150 35.5 3.13 D2510R 18,820 N2 379 87 T21S303 STAB 417709-65
MC2113ATZ 500 150/300 17.5 1.55 D5510R 18,820 N2 405 87 T21S304 STAB 417709-65
15 1750/2300 SC2512ATZ 240 150 53.5 2.17 D2515R 28,213 N2 560 6,87 T25S301 STAB 417709-66
SC2512ATZ 500 150/300 25.6 1.71 D5515R 28,213 N2 547 87 T25S302 STAB 417709-66
20 1750/2300 LC2512ATZ 240 150 71 4.14 D2520R 30,464 N2 640 87 T25S303 STAB 417709-66
LC2512ATZ 500 150/300 33 2.05 D5520R 30,464 N2 640 87 T25S304 STAB 417709-66
25 1750/2300 MC2812ATZ 240 150 87 4.05 D2525R 43,228 N2 805 87 T28S301 STAB 417709-67
MC2812ATZ 500 150/300 41 2.23 D5525R 43,228 N2 815 86,87 T28S302 STAB 417709-67
30 1750/2300 LC2812ATZ 500 150/300 50 1.75 D5530R 48,066 N2 895 87 T28S303 STAB 417709-67
40 1750/2300 MC3212ATZ 500 150/300 65 1.82 D5540R 65,449 N2 1120 87 T32S301 STAB 417709-68
50 1750/2300 LC3212ATZ 500 150/300 84 1.97 D5550R 69,186 N2 1270 87 T32S302 STAB 417709-68
5 thru 50 Hp NEMA 1812ATZ thru 3212ATZ
Applications: Metals, paper, web processes, extruders, cranes, conveyors,
packaging, printing, machine tools.
Features: Unique laminated square frame for improved commutation on
rectified power supplies. The square configuration allows for increased
rating per frame size. Class F rated insulation system. Service Line brushes
with convenient wear indicating reference lines. PLS™ (Positive Lubrication
System) for longer bearing and motor life. F-1 mounting unless otherwise
specified. Tach adaptable with thermostat.
RPM III DC Shunt
Wound SCR Drive
TEFC Motors, 240V &
500V Armature, Power
Code C
NOTE: Encoder and tachometer kits on page 248.
(a) Field amps at 25°C
(b) Field amps for high voltage connection
(c) TENV enclosure
(d) Power Code D
246
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
Hp Base/Max
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes Reliance
M/N
Field
Type
XPY
Tach Kit
Arm. Field Arm. Field (a)
10 1750/2300 SC2113ATZ 500 300 18 1.11 D5010RS-BV 19,133 N2 345 (c) 101,102 T21T1342 STAB 417708-21
15 1750/2300
SC2113ATZ 240 150 56 4.73 D2015R-BV 16,556 N2 345 (d) 103 T21T1359 STR 417708-21
SC2113ATCZ 240 150 56 4.73 CD2015R-BV 17,153 N2 345 (b) 103 T21T1384 STR 417708-21
SC2113ATZ 500 300 27 2.22 D5015R-BV 16,556 N2 375 103 T21T1364 STR 417708-21
SC2113ATZ 500 300 27 3.03 D5015RS-BV 19,133 N2 345 (c) 101,102 T21T1346 STAB 417708-21
20 1750/2300
SC2113ATZ 240 150 76.5 7.12 D2020R-BV 16,556 N2 345 (d) 103 T21T1363 STR 417708-21
SC2113ATZ 500 300 37 3.03 D5020R-BV 16,556 N2 390 103 T21T1350 STR 417708-21
MC2113ATZ 500 300 37 2.23 D5020RS-BV 20,894 N2 370 (c) 101,102 T21T1344 STAB 417708-21
25 1750/2300
MC2113ATZ 240 150 96 8.43 D2025R-BV 18,317 N2 370 (d) 103 T21T1371 STR 417708-21
MC2113ATZ 500 300 46 3.33 D5025R-BV 18,317 N2 410 6,104 T21T1351 STR 417708-21
LC2113ATZ 500 300 43 3.08 D5025RS-BV 22,483 N2 472 (c) 101,102 T21T1345 STAB 417708-21
30
1750/2300 LC2113ATZ 240 150 109 10 D2030R-BV 19,905 N2 400 103 T21T1375 STR 417708-21
LC2113ATZ 500 300 52 3.3 D5030R-BV 19,905 N2 445 103 T21T1352 STR 417708-21
1750/2300 SC2512ATZ 500 300 51 2.84 D5030RS-BV 30,609 N2 535 (c) 101,102 T25T1342 STAB 417708-21
1150/1800 LC2115ATZ 500 300 54 3.104 D5130R-BV 26,587 N2 480 104 T21T1378 STR 417708-21
40
1750/2300 LC2115ATZ 240 150 146 5.63 D2040R-BV 26,587 N2 480 6,103 T21T1380 STR 417708-21
1750/2100 MC2115ATZ 500 300 69 4.48 D5040R-BV 23,683 N2 501 103 T21T2353 STR 417708-21
MC2512ATZ 500 300 68.5 2.88 D5040RS-BV 31,738 N2 570 (c) 6,101,102 T25T1344 STAB 417708-21
1150/2000 LC2512ATZ 500 300 72 5.27 D5140R-BV 29,962 N2 640 104 T25T1355 STR 417708-21
50 1750/2100 LC2115ATZ 500 300 87 3.104 D5050R-BV 26,587 N2 520 103 T21T2354 STR 417708-21
LC2512ATZ 500 300 84 3.38 D5050RS-BV 32,860 N2 660 (c) 6,101,102 T25T1339 STAB 417708-21
1150/1900 C2514ATZ 500 300 87 4.06 D5150R-BV 34,634 N2 695 6,104 T25T1359 STR 417708-21
60 1750/2100 LC2512ATZ 500 300 102 4.6 D5060R-BV 29,962 N2 610 103 T25T2348 STR 417708-21
MC2812ATZ 500 300 100 3.43 D5060RS-BV 45,623 N2 860 (c) 6,101,102 T28T1330 STAB 417708-26
1150/1900 C2515ATZ 500 300 102 5.17 D5160R-BV 39,995 N2 805 6,103 T25T1364 STR 417708-21
75 1750/2100 C2514ATZ 500 300 124 6.21 D5075R-BV 34,634 N2 767 103 T25T2349 STR 417708-21
LC2812ATZ 500 300 124 3.62 D5075RS-BV 50,462 N2 885 (c) 6,101,102 T28T1327 STAB 417708-26
1150/2000 C2815ATZ 500 300 125 4.14 D5175R-BV 56,918 N2 1125 6,103 T28T1342 STR 417708-26
100
1750/2000 C2515ATZ 500 300 167 6.7 D50100R-BV 39,995 N2 890 103 T25T2350 STR 417708-21
1750/2100 MC3212ATZ 500 300 162 3.33 D50100RS-BV 67,915 N2 1210( c) 6,101,102 T32T1314 STAB 417708-26
1150/1850 C2815ATZ 500 300 168 4.14 D51100R-BV 56,918 N2 1239 6,104 T28T1344 STR 417708-26
125
1750/2000 C2813ATZ 500 300 204 6.103 D50125R-BV 49,873 N2 997 6,103 T28T1333 STR 417708-26
UC2813ATZ 500 300 204 6.103 D50125UR-BV 51,108 N2 945 5,6,103 T28T1349 STR 417708-26
1750/2000 LC3212ATZ 500 300 203 4.4 D50125RS-BV 71,773 N2 1290 (c) 6,101,102 T32T1318 STAB 417708-26
1150/2000 UC3214ATZ 500 300 204 8.36 D51125RR-BV 73,535 N2 1475 5,6,103 T32T1327 STR 417708-26
150
1750/2000
C2815ATZ 500 300 245 9.45 D50150R-BV 56,918 N2 1125 6,103 T28T1334 STR 417708-26
C2815ATZ 500 300 245 9.45 D50150RE-BV 56,918 N2 1125 6, 103 T28T1352 STR 417708-26
UC2815ATZ 500 300 245 9.45 D50150UR-BV 58,152 N2 1265 5,6,103 T28T1350 STR 417708-26
UC2815ATZ 500 300 245 9.45 D50150URE-BV 58,152 N2 1255 5,6,103 T28T1351 STR 417708-26
1750/2100 MC3612ATZ 500 300 240 4.8 D50150RS-BV 88,976 N2 1630 (c) 6,105 T36S1313 STAB 417708-26
1150/2000 ULC3612ATZ 500 300 249 7.29 D51150RR-BV 89,964 N2 1850 5,6,104 T36S1323 STR 417708-26
200 1750/2100 UC3214ATZ 500 300 322 8.36 D50200RR-BV 73,535 N2 1475 5,6,103 T32T1322 STR 417708-26
LC3612ATZ 500 300 321 5.41 D50200RS-BV 91,619 N2 1905 (c) 6,105 T36S1314 STAB 417708-26
1150/2000 C3613ATZ 500 300 323 10.7 D51200R-BV 106,410 N2 1850 6,104 T36S1325 STR 417708-26
250 1750/2100 ULC3612ATZ 500 300 405 8.87 D50250RR-BV 89,964 N2 1891 5,6,104 T36S1318 STR 417708-26
C4011ATZ 500 300 400 6.63 D50250RS-BV 124,469 N2 2310 (c) 6,105 T40S1306 STAB 417708-26
1150/2000 MC4013ATZ 500 300 406 10.7 D51250R-BV 145,465 N2 2735 6,104 T40S1317 STR 417708-26
300
1750/2000 LC3613ATZ 500 300 478 12.5 D50300R-BV 113,818 N2 2190 6,104 T36S1319 STR 417708-26
1750/2100 MC4013ATZ 500 300 478 6.5 D50300RS-BV 150,442 N2 2815 (c) 6,105 T40S1309 STAB 417708-26
1150/2000 LC4013ATZ 500 300 485 13.2 D51300R-BV 163,196 N2 3015 6,104 T40S1320 STR 417708-26
400 1750/2000 MC4013ATZ 500 300 643 11.9 D50400R-BV 145,465 N2 3040 6,104 T40S1314 STR 417708-26
LC4013ATZ 500 300 635 7.97 D50400RS-BV 168,174 N2 3040 (c) 6,105 T40S1311 STAB 417708-26
1150/1600 C4413ATZ 500 300 644 13 D51400R-BV 201,741 N2 3830 6,101,104 T44T1304 STR 417708-156
500 1750/2050 C4412ATZ 500 300 797 10.8 D50500R-BV 196,381 N2 3480 6,101,104 T44T1305 STR 417708-156
1150/1450 C4414ATZ 500 300 805 12.3 D51500R-BV 206,180 N2 4560 6,101,104 T44T1306 STR 417708-156
10 thru 500 Hp NEMA 2113ATZ thru 4414ATZ
Applications: Metals, printing, extruders, cranes, conveyors, machine tools
Features: Laminated square frame for improved commutation. Tach
adaptable with thermostat. F1 mount unless otherwise specified.
RPM III Wound Field SCR
Drive DPG-FV Motors,
240V & 500V Armature,
Power Code C
NOTE: Encoder and tachometer kits on page 248. (a) Field amps at 25°C (c) Extruder duty enclosed commutator design
(b) 210TC C-Face (d) Power Code D
247
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Hp Base/Max
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Notes Reliance
M/N
Field
Type
XPY
Tach Kit
Arm. Field Arm. Field(a)(b)
3 1750/2300 DC189ATCZ (c)(e) 240 150 11 1.52 D2003R 6,431 N2 161 80,83 T18R1127 STAB 413336-1R
C1811ATZ 500 300 5.2 0.741 D5003R 9,967 N2 197 80 T18R1333 (d) STR 413336-1R
5 1750/2300 C1811ATZ 240 150 19.2 1.77 D2005R 10,358 N2 194 80,83 T18R1318 (d) STAB 413336-1R
C1811ATZ 500 300 9 1 D5005R 9,967 N2 194 80 T18R1334 (d) STR 413336-1R
7.5 1750/2300 C1811ATZ 240 150 28 1.95 D2007R 10,358 N2 210 80,83 T18R1301 (d) STAB 413336-1R
C1811ATZ 500 300 13.5 1.29 D5007R 9,967 N2 197 80 T18R1335 (d) STR 413336-1R
10 1750/2300 C1812ATZ 240 150 37 2.12 D2010R 11,335 N2 233 80,84 T18R1302 (d) STAB 413336-1R
C1812ATZ 500 300 17.4 1.08 D5010R 11,335 N2 227 80,85 T18R1307 (d) STAB 413336-1R
15 1750/2300 SC2113ATZ 240 150 56 4.12 D2015R 15,311 N2 315 87 T21S1330 STAB 417708-21
SC2113ATZ 500 150/300 27 1.76 D5015R 15,311 N2 320 87 T21S1322 STAB 417708-21
20 1750/2300 LC2113ATZ 240 150 74 4.24 D2020R 18,661 N2 403 87 T21S1331 STAB 417708-21
MC2113ATZ 500 150/300 35 1.98 D5020R 17,074 N2 372 87 T21S1323 STAB 417708-21
25 1750/2300 LC2113ATZ 240 150 91.5 5.82 D2025R 18,661 N2 415 87 T21S1332 STAB 417708-21
LC2113ATZ 500 150/300 43 2.61 D5025R 18,661 N2 394 87 T21S1324 STAB 417708-21
30 1750/2300 SC2512ATZ 240 150 111 3.45 D2030R 26,466 N2 515 87 T25S1330 STAB 417708-21
SC2512ATZ 500 150/300 52 1.71 D5030R 26,466 N2 520 87 T25S1322 STAB 417708-21
40 1750/2100 LC2512ATZ 500 150/300 68 2.4 D5040R 28,717 N2 605 6,87 T25S1323 STAB 417708-21
50 1750/2100 MC2812ATZ 500 150/300 85 2.01 D5050R 41,092 N2 766 6,87 T28S1313 STAB 417708-26
60 1750/2100 LC2812ATZ 500 300 100 2.77 D5060R 45,931 N2 860 6,87 T28S1314 STAB 417708-26
3 thru 60 Hp NEMA 189ATCZ thru 2812ATZ
Applications: Metals, paper, web processes, extruders, cranes, conveyors,
packaging, printing, machine tools.
Features: Unique laminated square frame for improved commutation on
rectified power supplies. The square configuration allows for increased rating
per frame size. High limit thermostat. Provision for adding adapter mounted
feedback device. Class F rated insulation system. Service Line brushes
with convenient wear indicating reference lines. PLS™ (Positive Lubrication
System) for longer bearing and motor life. F-1 mounting unless otherwise
specified.
RPM III Wound Field
SCR Drive DPG Motors,
240V & 500V Armature
Power Code C
NOTE: Encoder and tachometer kits on page 248.
(a) Field amps at 25°C
(b) Field amps for high voltage connection
(c) 180 TC C-face
(e) Top mounted conduit box, if blower added, blower must be mounted F-1 or F-2
(d) Power Code D
248
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
Device
Type
Catalog
Number Frames Enclosure List
Price
Mult.
Sym.
Ap’x.
Shpg. Wgt.
XC42, XC46, BC42,
BC46, H56,
800123-R & -S
413336-2R DC180, C180, DC2112 DPG, DPFV, TENV 1,689 A8 9
417708-22 C210-C250 DPG, DPFV, TENV 1,689 A8 9
417708-27 C280-C400 DPG, DPFV, TENV 1,689 A8 9
417708-155 C440 DPG, DPFV, TENV 1,689 A8 9
417709-21 C180 TEFC 4,245 A8 19
417709-58 C210 TEFC 4,245 A8 20
417709-59 C250 TEFC 4,245 A8 23
417709-60 C280 TEFC 4,245 A8 23
417709-61 C320 TEFC 4,245 A8 29
XPY, XPYII,
5PY, RPY444
413336-1R DC180, C180, DC2112 DPG, DPFV, TENV 1,689 A8 7
417708-21 C210-C250 DPG, DPFV, TENV 1,689 A8 7
417708-26 C280-C400 DPG, DPFV, TENV 1,689 A8 7
417708-156 C440 DPG, DPFV, TENV 1,689 A8 8
417709-17 C180 TEFC 4,245 A8 6
417709-65 C210 TEFC 4,245 A8 6
417709-66 C250 TEFC 4,245 A8 9
417709-67 C280 TEFC 4,245 A8 15
417709-68 C320 TEFC 4,245 A8 18
RL67
417708-40 DC180, C180, DC2112 DPG, DPFV, TENV 1,091 A8 1
417708-41 C210 - C250 DPG, DPFV, TENV 1,091 A8 2
417708-42 C280 - C400 DPG, DPFV, TENV 1,091 A8 1
417708-157 C440 DPG, DPFV, TENV 1,091 A8 1
Encoder and Tachometer
Mounting Kits (less tach)
Applications: Encoder and Tachometer mounting kits for field installation
Features: Kits include all mounting hardware required for installation on
RPM III DC motors. Feedback device not included.
Device
Type Output Catalog
Number Frames Enclosure List
Price
Mult.
Sym.
Ap’x.
Shpg. Wgt.
RD120-1 1 x 120 ppr
417708-30 DC180, C180, DC2112 DPG, DPFV 3,164 E8 5
417708-32 C210-C250 DPG, DPFV, TENV 3,164 E8 5
417708-33 C280-C400 DPG, DPFV, TENV 3,164 E8 5
417708-153 C440 DPG, DPFV, TENV 3,164 E8 5
RD120-2 2 x 120 ppr
417708-34 DC180, C180, DC2112 DPG, DPFV 3,764 E8 5
417708-36 C210-C250 DPG, DPFV, TENV 3,764 E8 5
417708-37 C280-C400 DPG, DPFV, TENV 3,764 E8 5
417708-154 C440 DPG, DPFV, TENV 3,764 E8 5
H20 1024 ppr
417708-133 DC180, C180, DC2112 DPG, DPFV, TENV 4,036 E8 5
417708-134 C210-C250 DPG, DPFV, TENV 4,036 E8 5
417708-135 C280-C400 DPG, DPFV, TENV 4,036 E8 5
417708-151 C440 DPG, DPFV, TENV 4,036 E8 5
RL67 1024z ppr
417708-126 DC180, C180, DC2112 DPG, DPFV, TENV 5,128 E8 4
417708-136 C210-C250 DPG, DPFV, TENV 5,128 E8 6
417708-137 C280-C400 DPG, DPFV, TENV 5,128 E8 6
417708-138 C440 DPG, DPFV 5,128 E8 4
RE045 45 VAC/
1000 RPM
417708-25 C280-C400 DPG, DPFV, TENV 4,673 N5 11
417708-152 C440 DPG, DPFV, TENV 4,673 N5 13
RPM III DC Motor
Encoder and Tachometer Kits
Applications: Encoder and Tachometer Kits for Field Installation
Features: Kits include the encoder or tachometer and all mounting
hardware required for installation on RPM III DC Motors.
249
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Motor
Frame
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt. (lb)
Description
C180ATZ, DC180ATZ 417077-51 1,491 A8 44 Blower Kit Without Filter
C210ATZ 419947-29 1,491 A8 52 Blower Kit Without Filter
C250ATZ 419947-30 1,491 A8 39 Blower Kit Without Filter
C280ATZ 419947-32 1,823 A8 55 Blower Kit Without Filter
C320ATZ 419947-34 2,123 A8 81 Blower Kit Without Filter
C3612ATZ 417077-74 2,123 A8 55 Blower Kit Without Filter
C3613ATZ 417077-127 2,123 A8 75 Blower Kit Without Filter
C400ATZ 417077-75 2,324 A8 85 Blower Kit Without Filter
C440ATZ 417077-126 4,738 A8 225 Blower Kit Without Filter
Blower Kits for use with RPM III DC Motors
Suitable for operation on 230/460V or 240/480V, 3-Phase, 50/60 Hz
Motor
Frame
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt. (lb)
Description
C180ATZ, DC180ATZ 417077-57 911 A8 2 Washable Wire Mesh Canister Type
C2113ATZ 417077-58 911 A8 4 Washable Wire Mesh Canister Type
C2115ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C2512ATZ 417077-58 911 A8 4 Washable Wire Mesh Canister Type
C2514ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C2515ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C2812ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C2813ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C2815ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C3210ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C3212ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C3214ATZ 417077-59 911 A8 4 Washable Wire Mesh Canister Type
C3612ATZ 417077-65 1,165 A8 7 Washable Wire Mesh Canister Type
C3613ATZ 417077-102 1,642 A8 6 Washable Wire Mesh Canister Type
C400ATZ 417077-102 1,642 A8 6 Washable Wire Mesh Canister Type
C440ATZ 417077-124 1,893 A8 18 Square Replaceable Polyester Type
Filter Kits for use with DPG-FV, RPM III DC motors
Motor
Frame
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Description Dimension
Sheet
DC1810ATZ 42384-26D 319 A8 14 Standard Duty 609987-501
DC1811ATZ 42384-26BE 319 A8 17 Heavy Duty 609987-501
C1811ATZ 42384-26BE 278 A8 17 Heavy Duty 609987-1
C1812ATZ 42384-26BF 319 A8 17 Heavy Duty 609987-1
DC2112ATZ 42384-26BH 545 A8 29 Heavy Duty 609958-51
C2113ATZ 419914-1A 545 A8 50 Heavy Duty 609957-1
C2115ATZ 419914-1P 545 A8 36 Heavy Duty 609957-1
C2512ATZ 419914-1B 634 A8 33 Heavy Duty 609957-1
C2514ATZ 419914-1R 634 A8 59 Heavy Duty 609957-1
C2515ATZ 419914-1S 634 A8 36 Heavy Duty 609957-1
UC2812ATZ 419914-1C 1,223 A8 37 Heavy Duty 609957-1
UC2813ATZ 419914-1T 1,223 A8 26 Heavy Duty 609957-1
UC2815ATZ 419914-1U 1,223 A8 42 Heavy Duty 609957-1
UC3212ATZ 419914-1D 1,606 A8 69 Heavy Duty 609977-1
UC3214ATZ 419914-1W 1,606 A8 76 Heavy Duty 609977-1
UC3612ATZ 419914-1E 2,166 A8 76 Heavy Duty 609977-1
UC3613ATZ 419914-1X 2,166 A8 81 Heavy Duty 609977-1
Sliding Bases for RPM III DC motors
Applications: Used for adjusting belt tension on belted applications. Not suitable for wall or ceiling mounting.
250
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
SCR Drive Motors Shunt
and Stabilized Shunt
Wound - DPFG, Self
Ventilated, Rigid Base
5 thru 250 Hp NEMA L186AT thru 506AT
Applications: Conveyors, plastic extruders, packaging machinery and other
constant torque applications for DC SCR motors.
Features: Includes thermostat on interpole. Class F insulation system
resistant to dirt, carbon, dust and moisture. High dielectric stability. Low
moment of inertia armature for fast response. Constant pressure brush
springs and longer brushes for reduced maintenance. Includes grease fittings
and reliefs for bearing maintenance. Power code C and D or M-G sets.
Maximum RPM by field weakening. Provisions for tach mounting. (See tach
mounting kits on page 322). May be converted to blower ventilated (DPBV) for
extended constant torque speed range.
NOTES:
(a) DPFG enclosure is self-ventilated. Speed can be reduced to approximately 60% of base speed with constant torque.
See performance data in CA608 catalog for specific speed-torque curves. Separate blower can be used to increase operating range below 60% of base speed.
(b) Field amps are for 150V connection on 240VDC motors; 300V connection on 500VDC motors. 360, 400 & 500 frames are 4 pole stabilized shunt until 3rd quarter 2006
when they became shunt. Others are 2 pole shunt.
(c) Does not include price of blower. See page 253 for pricing.
(d) Does not include weight of blower. See page 253 for weights.
(e) See notes on inside back flap.
180 frame motors are supplied without external conduit box, see online layout drawing for details.
Hp Base/Max
Speed (a)
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Motors
Only (c)
Mult.
Sym.
Ap’x.
Shpg.
Wgt. (d)
XPY
Tach
Kit
Blower
Catalog
Number
Notes (e)
Arm. Field Arm. Field (b)
5 1750/2300 L186AT 240 150/300 17.7 .68 D2005P 6,242 N2 180 TKP1836XP FVB3180 2,20
500 150/300 8.5 .6 D5005P 6,242 N2 162 TKP1836XP FVB3180 2,20
7 1/2 1750/2300 1810AT 240 150/300 28.1 .8 D2007P 7,258 N2 218 TKP1836XP FVB3180 2,20
218AT 500 150/300 13.2 .69 D5007P 8,009 N2 235 TKP1836XP FVB3210 2,20
10 1750/2300 219AT 240 150/300 36.6 2.16 D2010P 8,238 N2 245 TKP1836XP FVB3210 2,20
500 150/300 17.2 1.17 D5010P 8,238 N2 255 TKP1836XP FVB3210 2,20
15 1750/2300 258AT 240 150/300 55 2.58 D2015P 9,861 N2 250 TKP1836XP FVB3250 2,20
500 150/300 25.2 1.4 D5015P 9,861 N2 250 TKP1836XP FVB3250 2,20
20 1750/2300 259AT 240 150/300 70.5 2.48 D2020P 11,273 N2 250 TKP1836XP FVB3250 2,20
500 150/300 35.1 1.24 D5020P 11,273 N2 250 TKP1836XP FVB3250 2,20
25 1750/2300 288AT 240 150/300 89.2 2.99 D2025P 15,236 N2 575 TKP1836XP FVB4280 2,20
287-8AT 500 150/300 43.4 1.64 D5025P 15,236 N2 490 TKP1836XP FVB4280 2,20
30 1750/2300 288AT 240 150/300 106 4.52 D2030P 15,236 N2 595 TKP1836XP FVB4280 2,20
500 150/300 50 2 D5030P 15,236 N2 590 TKP1836XP FVB4280 2,20
40 1750/2100 328AT 500 150/300 67.9 2.17 D5040P 20,393 N2 784 TKP1836XP FVB6320 2,20
50 1750/2100 328AT 500 150/300 83.7 2 D5050P 20,393 N2 835 TKP1836XP FVB6320 2,20
60 1750/2100 365-6AT 500 150/300 98.6 1.75 D5060P 27,343 N2 790 TKP1836XP FVB6400 2,20
75 1750/2100 366AT 500 150/300 123 1.48 D5075P 27,343 N2 905 TKP1836XP FVB6400 2,20
100 1750/2000 368AT 500 150/300 158 3 D50100P 36,878 N2 1100 TKP1836XP FVB6400 2,20
125 1750/2000 407AT 500 150/300 200 3 D50125P 42,414 N2 1445 TKP400XP FVB6400 2,20
150 1750/2000 409AT 500 150/300 237 3.7 D50150P 52,882 N2 1785 TKP400XP FVB6400 2,20
200 1750/1900 504AT 500 150/300 320 3.9 D50200P 65,981 N2 2095 TKP500XP FVB8500 2,20
250 1750/1900 506AT 500 150/300 392 5 D50250P 79,067 N2 2540 TKP500XP FVB8500 2,20
251
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
NOTE: (a) Field amps for 240VDC connection. (b) Does not include price of blower and filter. See page 253 for pricing.
(c) Does not include weight of blower and filter. See page 253 for weights. Tach mounting kits on page 253.
(d) See notes on inside back flap. 180 frame motors are supplied without external conduit box, see online layout drawing for details.
40 thru 500 Hp NEMA 328AT thru 5010AT
Applications: Conveyors, plastic extruders, packaging machinery and other
constant torque applications for DC SCR motors.
Features: Includes thermostat on interpole. Class F insulation system
resistant to dirt, carton, dust and moisture. High dielectric stability. Low
moment of inertia armature for fast response. Constant pressure brush
springs and longer brushes for reduced maintenance. Includes grease fittings
and reliefs for bearing maintenance. Power code C or M-G sets. Maximum
RPM by field weakening. Provisions for tach mounting. (See tach kits on
page 322). Blower-ventilated, includes filter.
SCR Drive Motor Shunt
and Stabilized Shunt
Wound DPBV Enclosure
- Rigid Base
NOTE: (a) Field amps are for 150V connection on 240VDC motors; 300V connection on 500VDC motors.
360 through 500 frames are 4 pole stabilized shunt, until 3rd quarter 2006 when they became shunt. Others are 2 pole shunt. Tach mounting kits on page 253.
(b) See notes on inside back flap.
3 thru 15 Hp NEMA L186ATC thru 258ATC
Applications: Conveyors, plastic extruders, packaging machinery and other
constant torque applications for DC SCR motors.
Features: Includes thermostat on interpole. Class F insulation system
resistant to dirt, carbon, dust and moisture. High dielectric stability. Low
moment of inertia armature for fast response. Constant pressure brush
springs and longer brushes for reduced maintenance. Includes grease fittings
and reliefs for bearing maintenance. Power code C or M-G sets. Maximum
RPM by field weakening.
SCR Drive Motor 240V
Armature - 240V Field
Shunt Wound DPFG -
Self-Ventilated Rigid
Base and C-Face
Hp Base/Max
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List Price
w/Blower
& Filter
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
XPY
Tach
Kit
Notes (b)
Arm. Field Arm. Field (a)
40 1750/2100 328AT 240 150/300 138 2.64 D2040P-BV 23,764 N2 855 TKP1836XP 2,20
500 150/300 67.9 2.17 D5040P-BV 23,764 N2 830 TKP1836XP 2,20
50 1750/2100 328AT 240 150/300 175 2.64 D2050P-BV 23,764 N2 835 TKP1836XP 2,20
500 150/300 83.7 2 D5050P-BV 23,764 N2 885 TKP1836XP 2,20
60 1750/2100 366AT 240 150/300 201 5.6 D2060P-BV 30,715 N2 980 TKP1836XP 2,20
365-6AT 500 150/300 98.6 1.75 D5060P-BV 30,715 N2 880 TKP1836XP 2,20
75 1750/2100 366AT 240 150/300 256 5.6 D2075P-BV 30,715 N2 975 TKP1836XP 2,20
500 150/300 123 1.48 D5075P-BV 30,715 N2 960 TKP1836XP 2,20
100 1750/2000 368AT 500 150/300 158 3 D50100P-BV 40,250 N2 1145 TKP1836XP 2,20
125 1750/2000 368AT 500 150/300 197 3 D50125P-BV 40,250 N2 1170 TKP1836XP 2,20
150 1750/2000 407-9AT 500 150/300 238 2.7 D50150P-BV 46,126 N2 1515 TKP400XP 2,20
200 1750/1900 409AT 500 150/300 311 3.75 D50200P-BV 57,457 N2 1830 TKP400XP 2,20
250 1750/1900 504-6AT 500 150/300 405 4.9 D50250P-BV 70,339 N2 2175 TKP500XP 2,20
300 1750 506AT 500 150/300 478 6.2 D50300P-BV 83,425 N2 2640 TKP500XP 2,20
400 1750/1900 508AT 500 150/300 624 6.08 D50400P-BV 117,765 N2 3285 TKP5006XP 2,20
500 1750/1900 5010AT 500 150/300 788 6 D50500P-BV 154,655 N2 4170 TKP500XP 2,20
Hp Base/Max
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Motor
(b)
Mult.
Sym.
Ap’x.
Shpg.
Wgt. (c)
XPY
Tach
Kit
Blower
Catalog
Number
Notes (d)
Arm. Field Arm. Field (a)
3 1750/2300 L186ATC 240 120/240 10.6 .45 CD2003P-2 6,453 N2 170 TKP1836XP FVB3180 1, 3
5 1750/2300 L186ATC 240 120/240 17.7 .45 CD2005P-2 6,453 N2 170 TKP1836XP FVB3180 1, 3
7 1/2 1750/2300 1810ATC 240 120/240 28.1 .52 CD2007P-2 7,468 N2 222 TKP1836XP FVB3180 1, 3
10 1750/2300 219ATC 240 120/240 36.6 1.26 CD2010P-2 8,834 N2 250 TKP1836XP FVB3210 1, 3
15 1750/2300 258ATC 240 120/240 55 1.26 CD2015P-2 10,458 N2 250 TKP1836XP FVB3250 1, 3
252
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
5 thru 25 Hp NEMA 1810AT THRU 328AT
Applications: Conveyors and packaging machinery.
Features: Includes thermostat on interpole, grease fittings and reliefs. Class
F insulation system. Constant pressure brush springs and precision brush
holders. Provisions for tach mounting ( See tach mounting kits page 322).
NOTE: (a) Field amps are for 150V connection on 240VDC motors; 300V connection on 500VDC motors. Tach mounting kits on page 253.
(b) See notes on inside back flap.
180 frame motors are supplied without external conduit box, see online layout drawing for details.
5 thru 40 kW NEMA 1810AT thru 329AT
Applications: Crane mounted lifting magnets for recyclers and steel mills.
Features: Heavy duty steel frame. Cast iron endplates. Class H insulation
with Class F temperature rise. Precision brush holders. Constant force brush
springs. Double sealed ball bearings. Compound wound with drooping
voltage characteristics. DPFG enclosure. Weather resistant paint.
F-2 conduit box. CDMG generators have C-face and base mounting for
hydraulic pump or PTO mounting.
Lifting Magnet
Generators
NOTE: Field control rheostat and meters are not included in price or available from Baldor.
(a) See notes on inside back flap.
Shunt Wound SCR
Drive Motor - TEFC,
Rigid Base
Hp Base/Max
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List Price
Motors
Only
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
XPY
Tach
Kit
Notes (b)
Arm. Field Arm. Field (a)
5 1750/2300 1810AT 240 150/300 17.6 0.68 D2505P 9,004 N2 220 N/A 1, 3
500 150/300 8.3 0.34 D5505P 9,004 N2 214 N/A 1, 3
7 1/2 1750/2300 2110AT 240 150/300 26.6 2.10 D2507P 10,480 N2 300 TKP2136XPT 1, 3
500 150/300 12.3 1.05 D5507P 10,480 N2 310 TKP2136XPT 1, 3
10 1750/2300 259AT 240 150/300 34.3 1.72 D2510P 13,020 N2 250 TKP2136XPT 1, 3
500 150/300 16.3 0.86 D5510P 13,020 N2 250 TKP2136XPT 1, 3
15 1750/2300 288AT 240 150/300 51.7 1.96 D2515P 17,374 N2 630 TKP2136XPT 1, 3
500 150/300 24.5 0.99 D5515P 17,374 N2 630 TKP2136XPT 1, 3
20 1750/2300 328AT 240 150/300 68.8 2.22 D2520P 22,882 N2 850 TKP2136XPT 1, 3
500 150/300 32.7 1.11 D5520P 22,882 N2 875 TKP2136XPT 1, 3
25 1750/2300 328AT 240 150/300 84.8 2.22 D2525P 22,882 N2 872 TKP2136XPT 1, 3
500 150/300 40.9 1.11 D5525P 22,882 N2 870 TKP2136XPT 1, 3
kW Base
Speed
NEMA
Frame
Voltage
D.C.
Full Load
Amperage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Field Control
Rheostat Notes (a)
Ohms Amp Max.
Arm. Field Arm. Field
5 2500 1810AT 230 230 21.7 0.61 DMG2305 7,521 N2 220 300 0.85 1, 3
7 1/2 2500 219AT 230 230 32.6 1.14 DMG2307 8,652 N2 245 150 1.6 1, 3
10 2500 219AT 230 230 43.5 0.72 DMG2310 9,589 N2 250 200 1.4 1, 3
219ATC 230 230 43.5 0.72 CDMG2310 10,190 N2 250 200 1.4 1, 3
15 1750 259AT 230 230 65 1.3 DMG2315 16,097 N2 250 200 1.82 1, 3
259ATC 230 230 65 1.3 CDMG2315 16,684 N2 250 200 1.82 1, 3
20 1750 288AT 230 230 87 1.8 DMG2320 17,622 N2 595 125 2.52 1, 3
288ATC 230 230 87 1.8 CDMG2320 18,625 N2 620 125 2.52 1, 3
25 1750 328AT 230 230 109 2.13 DMG2325 19,269 N2 820 100 3.0 1, 3
328ATC 230 230 109 2.13 CDMG2325 20,265 N2 886 100 3.0 1, 3
33 1750 328AT 230 230 144 2.13 DMG2333 24,435 N2 840 100 3.0 1, 3
328ATC 230 230 144 2.13 CDMG2333 25,423 N2 880 100 3.0 1, 3
40 1750 329AT 230 230 174 3.7 DMG2340 26,785 N2 910 50 5.2 1, 3
253
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Motor
Frame
Catalog
Number
Blower
Power
Blower
Size
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Blower and Mounting Kit
180 FVB3180 1 PH LM 3 1,491 A8 18
210 FVB3210 3 PH LM 3 1,491 A8 25
250 FVB3250 3 PH LM 3 1,491 A8 19
280 FVB4280 3 PH LM 4 1,823 A8 44
320 FVB6320 3 PH LM 6 2,123 A8 46
360-400 FVB6400 3 PH LM 6 2,323 A8 59
504-506 FVB8500 3 PH LM 8 2,750 A8 93
508-5012 FVB95010 (a) 3 PH LM 9 4,738 A8 171
Filter and Hardware for Above Blowers
180, 210, 250 FLT3210-250 (b) - LM 3 791 A8 2
280 FLT4280 - LM 4 791 A8 9
320,360,400 FLT6320-400 - LM 6 791 A8 14
504-506 FLT8500 - LM 8 965 A8 9
Tach
Type
Motor
Frame
Motor
Enclosure
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
XPYII
XPY, DPY
BTG1000
180/360 DPFG, DPBV TKP1836XP 1,142 A8 1
210/360 TEFC TKP2136XPT 1,142 A8 13
400 DPFG, DPBV TKP400XP 1,142 A8 3
500 DPFG, DPBV TKP500XP 1,142 A8 3
XC42 or
XC46
210/360 DPFG, DPBV TKP2136XC 1,689 A8 16
500 DPFG, DPBV TKP500XC 1,689 A8 7
ENC00NV
ENCODER
180/360 DPFG, DPBV TKP1836ENC 867 A8 17
400 DPFG, DPBV TKP400ENC 867 A8 16
500 DPFG, DPBV TKP500ENC 867 A8 17
NCS
PANCAKE
210/360 DPFG, DPBV TKP2136NC 65 A8 3
400 DPFG, DPBV TKP400NC 65 A8 1
500 DPFG, DPBV TKP500NC 65 A8 1
AC
PANCAKE
210/360 DPFG, DPBV TKP2136AC 65 A8 2
400 DPFG, DPBV TKP400AC 65 A8 1
500 DPFG, DPBV TKP500AC 65 A8 1
NOTE:
(a) Includes Blower and Filter. (b) Also used with FVB3180.
Blower and Mounting Kits for DC Integral Hp Motor Catalog No. Ending With “P”
Tach Mounting Kits and Cooling Blowers for DC Integral Hp Motors
Tach Mounting Kits for DC Integral Hp Motor Catalog No. Ending With “P”
Applications: Allows addition of DC, AC and digital tachometers to large
DC motors for closed-loop operation.
Features: Tach mounting kits supply adapter, coupling, accessory shaft and
mounting hardware. Allows mounting to 8.5 inch accessory face on most
large DC motors.
254
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
Tach Generators
DC, AC and Digital
Output
Applications: Speed feedback for controls (encoders also offer position
feedback).
Features: Ball bearing construction, standard mounting flanges and/or feet.
Generator
Type Voltage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
XPY Flange Mount (DC)
30AFL-O 50VDC BTG1000 409 DS 7
XPYII 100VDC BTG100XPS 743 N5 2
XPYII 100VDC PTG100XPS 1099 N5 10
XPY 100VDC PTG100XP 1058 N5 3
XPY 50VDC BTG50XPS 743 N5 3
XPYII 50VDC PTG50XPS 1099 N5 8
XPY 50VDC PTG50XP 1058 N5 3
XPY Washdown Flange Mount (DC)
XPYII 100VDC PTGWD100XPS 1170 N5 9
XPYII 100VDC BTGWD100XPS 884 N5 2
XPYII 50VDC PTGWD50XPS 1170 N5 10
Encoder Based Digital PY Flange Mount
DPY 1024PPR PTG1024LD (a) 1380 N5 1
Electrically Isolated Encoder
E-ACC 1024PPR ENC00NV (a) (b) 1501 E8 2
Metric Flange Mount (DC)
XPY 60VDC PTG60XP-M (c) 1058 N5 8
XPYII 60VDC PTG60XPS-M (c) 1099 N5 5
Foot Mount (DC)
XPY 100VDC PFTG100XP 1058 N5 6
XPY 50VDC PFTG50XP 1058 N5 6
Foot Mount with Face (DC)
XC42 100VDC PFTG42100X 2081 N5 33
XC42 50VDC PFTG4250XC 2127 N5 32
XC46 100VDC PFTG46100X 3659 N5 43
XC46 50VDC PFTG4650XC 3659 N5 44
Pancake Mount (AC & DC)
AC 45/90VAC PTG4590AC (d) ** 1017 N5 9
NCS 50VDC PTG50NC (d) ** 1518 N5 8
Generator
Type Voltage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
XPY Flange Mount (DC)
30AFL-O 50VDC BTG1000 409 DS 7
XPYII 100VDC BTG100XPS 743 N5 2
XPYII 100VDC PTG100XPS 1099 N5 10
XPY 100VDC PTG100XP 1058 N5 3
XPY 50VDC BTG50XPS 743 N5 3
XPYII 50VDC PTG50XPS 1099 N5 8
XPY 50VDC PTG50XP 1058 N5 3
XPY Washdown Flange Mount (DC)
XPYII 100VDC PTGWD100XPS 1170 N5 9
XPYII 100VDC BTGWD100XPS 884 N5 2
XPYII 50VDC PTGWD50XPS 1170 N5 10
Encoder Based Digital PY Flange Mount
DPY 1024PPR PTG1024LD (a) 1380 N5 1
Electrically Isolated Encoder
E-ACC 1024PPR ENC00NV (a) (b) 1501 E8 2
Metric Flange Mount (DC)
XPY 60VDC PTG60XP-M (c) 1058 N5 8
XPYII 60VDC PTG60XPS-M (c) 1099 N5 5
Foot Mount (DC)
XPY 100VDC PFTG100XP 1058 N5 6
XPY 50VDC PFTG50XP 1058 N5 6
Foot Mount with Face (DC)
XC42 100VDC PFTG42100X 2081 N5 33
XC42 50VDC PFTG4250XC 2127 N5 32
XC46 100VDC PFTG46100X 3659 N5 43
XC46 50VDC PFTG4650XC 3659 N5 44
Pancake Mount (AC & DC)
AC 45/90VAC PTG4590AC (d) ** 1017 N5 9
NCS 50VDC PTG50NC (d) ** 1518 N5 8
Generator
Type Voltage Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
XPY Flange Mount (DC)
30AFL-O 50VDC BTG1000 559 DS 7
XPYIII 100VDC BTG100XPS 1,021 N5 2
XPYII 100VDC PTG100XPS 1,509 N5 10
XPY 100VDC PTG100XP 1,453 N5 6
XPYIII 50VDC BTG50XPS 1,021 N5 2
XPYII 50VDC PTG50XPS 1,509 N5 8
XPY 50VDC PTG50XP 1,453 N5 6
XPY Washdown Flange Mount (DC)
XPYII 100VDC PTGWD100XPS 1,607 N5 9
XPYIII 100VDC BTGWD100XPS 1,214 N5 2
XPYII 50VDC PTGWD50XPS 1,607 N5 10
XPYIII 50VDC BTGWD50XPS 1,214 N5 2
Encoder Based Digital PY Flange Mount
DPY 1024PPR PTG1024LD (a) 1,895 N5 1
Electrically Isolated Encoder
E-ACC 1024PPR ENC00NV (a) (b) 1,932 E8 2
Metric Flange Mount (DC)
XPY 60VDC PTG60XP-M (c) 1,453 N5 5
XPYII 60VDC PTG60XPS-M (c) 1,509 N5 8
XPYIII 60VDC BTG60XPS-M (c) 1,021 N5 2
Foot Mount (DC)
XPY 100VDC PFTG100XP 1,453 N5 6
XPY 50VDC PFTG50XP 1,453 N5 6
Foot Mount with Face (DC)
XC42 100VDC PFTG42100X 2,857 N5 33
XC42 50VDC PFTG4250XC 2,920 N5 32
XC46 100VDC PFTG46100X 5,021 N5 43
XC46 50VDC PFTG4650XC 5,021 N5 44
Pancake Mount (AC & DC)
AC 45/90VAC PTG4590AC (d) ** 1,396 N5 8
NCS 50VDC PTG50NC (d) ** 2,085 N5 8
NOTE: Flange mounted tachs require tach adapters shown on pages 253 & 255. XPY tachs have UL listing, file number E109527, CSA file number LR36841-5, XPYII
tachs are pending approval.
(a) See page 196 for cables.
(b) Electrically isolated encoder & kit: Mounts to SCR motors using appropriate adapter shown on page 253 may eliminate the need for EXB00801 isolated encoder
feedback board.
(c) Requires adapter for metric flange tach. Will not mount on adapters for PY flanges.
(d) Does not mount to TEFC. See catalog MN605 for details. Will only mount to DPFG and DPBV motors on pages 250 & 251 using adapters shown on page 253.
255
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
For PY Flange mounted BTG1000, XPY, XPYII and DPY
tachometers
Complete kits consisting of fan cover (except TK3300), shaft extension
coupling and tach adapter bracket with miscellaneous hardware. If you prefer,
the conversion can be made by Baldor Mod Express. Tach kits will not work
with Explosion Proof Motors (CDPX or CDX). See PY flange mount tachs
shown on page 254.
Field Conversion
Tach Mounting Kits
for Permanent Magnet
and Shunt Wound Motor
Baldor
Motor Type
Kit
Catalog
Number
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
3300P TK3300 202 A8 1
3400D/P TK3400 358 A8 4
3500D/P TK3500 377 A8 9
3600D TK3600 498 A8 5
3600P TK3600PM 498 A8 3
7500D TK7500 516 A8 17
9100D TK9100 557 A8 23
256
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
NEMA 1 Enclosed DC
Controls for PMDC and
Shunt Wound Motors
1/100 thru 2 Hp 115/230 VAC Single Phase 50/60 Hz.
Applications: General purpose industrial use with permanent magnet or
shunt wound DC motors.
Features: SCR controls have a free-wheeling diode and feature adjustable
accel, decel, current limit, IR comp, min. and max speed pots to match
applications. The anti-demag feature protects PM motors and helps protect
the SCR power bridge against direct shorts. The controls have US and
Canadian UL component recognition.
A Plug-in Horsepower Resistor® and armature fuse must be ordered and
installed in BC138, BC139, BC140, BC140-FBR, BC141 and BC142.
NOTE: (a) 1 Hp at 115V and 2 Hp at 230V requires BC143 heatsink kit. See page 330 for features. FBR=Forward/Brake/Reverse.
NOTE: BC24-LF is an AC line filter required for applications where CE is required if the control is not filtered elsewhere in the application. This filter may be used on most
115 or 230 VAC, single phase applications where CE is required.
DC Control Accessories
BC140 ENCLOSED (NEMA 1)
Hp
Range
Catalog
Number
List
Price
Mult.
Sym.
Ap’x
Shpg.
Wgt. Lbs.
Input
Voltage
1/100-1/3 BC138 218 E9 1 115
1/50-3/4 BC139 218 E9 1 230
1/100-2 (a) BC140 369 E9 3 115/230
1/100-2 (a) BC140-FBR 510 E9 3 115/230
Catalog
Number Description List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
BC24-LF Ac Line Filter for use with CE Applications 75 E9 1
BC143 External Heatsink Kit (BC140, BC140-FBR, BC141, BC142, BC204) 72 E9 2
BC144 Forward-Brake-Reverse Switch Kit for BC140 124 E9 1
BC145 Signal Isolator Board 211 E9 1
BC146 Current Sensing Relay/Overload Protector 136 E9 1
BC147 Barrier Terminal Board (BC141 and BC142) 30 E9 1
BC148 Replacement Potentiometer Kit (5K ohm) 13 E9 1
BC149 Knob and Dial Kit 15 E9 1
BC152 Barrier Terminal Board With Signal Isolator (BC141 and BC142) 193 E9 1
BC218 DIN-rail mounting kit for BC141, BC142 or BC204 36 E9 1
1/15 thru 1/4 115 VAC Single Phase 50/60 Hz.
Applications: Conveyors, machine tools and other applications requiring
adjustable speed.
Features: Simple DC motor control with built-in circuit breaker, center lock
reversing switch (center off), on/off switch, 7 foot SJO oil resistant cord, and
variable voltage transformer for manual speed adjustment. NEMA 1 enclosure
is standard. CSA list file # LR54532.
Fractional Horsepower
DC Speed Controls for
PMDC Motors
Max
Hp
Catalog
Number
List
Price
Mult
Sym.
Ap’x
Shpg. Wgt.
Amp
Capacity
Input
Voltage
1/15 BC110 549 E9 5 1.0 115VAC
1/8 BC115 586 E9 6 1.5 115VAC
1/4 BC130 746 E9 10 3.0 115VAC
257
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Chassis Mount DC
Controls
NOTE: (a) External Heatsink required. (b) Also used with AC Line Fuse. For AC line fuse rating see manual.
A Plug-in Horsepower Resistor® and armature fuse must be ordered and
installed in BC138, BC139, BC140, BC140-FBR, BC141 and BC142.
These should be selected based on the motor’s rated current. The price of
the Hp resistor and fuse is included in the BC138, BC139, BC140,
BC140-FBR, BC141 and BC142 list price.
See selection below for catalog number.
Spare resistor kits are available for $11.00 list, E9 multiplier.
BC141 / BC142
1/100 thru 1.5 Hp 115 VAC Single Phase 50/60 Hz.
1/50 thru 5 Hp 230 VAC Single Phase 50/60 Hz.
Applications: General purpose industrial use with permanent magnet or
shunt wound DC motors.
Features: Chassis-mount SCR controls have a free-wheeling diode and
feature adjustable accel, decel, current limit, IR comp, min and max speed
pots to match applications. The anti-demag feature protects PM motors and
helps protect the SCR power bride against direct shorts. The controls have
US and Canadian UL component recognition.
Plug-in Horsepower
Resistor and
Fuse Kit
Motor Hp
Armature Voltage
Plug-In Hp
Resistor Resistance
Value (Ohms)
Catalog
Number
Ap’x DC
Current (Amps)
DC Fuse Rating
For Armature
90-130V 180V
1/100 1/50 1.0 BR1000 0.20 0.5
1/50 1/25 0.51 BR0510 0.30 0.5
1/30 1/15 0.35 BR0350 0.33 0.5
1/20 1/10 0.25 BR0250 0.5 0.75
1/15 1/8 0.25 BR0251 0.8 1.0
1/12 1/6 0.18 BR0180 0.85 1.25
1/8 1/4 0.1 BR0100 1.3 2.0
1/6 1/3 0.1 BR0101 2.0 2.5
1/4 1/2 0.05 BR0050 2.5 4.0
1/3 3/4 0.035 BR0035 3.3 5.0
1/2 1 0.025 BR0025 5.0 8.0
3/4 1 1/2 0.015 BR0015SP 7.5 12.0
1 (a) 2 (a) 0.01 BR0010SP 10 15.0
1 1/2 (a) 3 (a) 0.006 BR0006 15 25.0 (b)
NOTE: Above controls include 5k speed potentiometer.
(a) 1-1.5 Hp at 115 Volts and 2-3 Hp at 230 Volts, requires BC143 Heatsink kit.
BC155 Includes integral heatsink. Please refer to page 330 for features.
Hp
Range
Catalog
Number
Description
Input Voltage / Max. Hp
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Input
Voltage
1/100-1 1/2 (a) BC141 Standard Model, single voltage 202 E9 1 115
1/100-1 1/2 BC141-SIH BC141 with BC152 Signal Isolator and
BC143 Heatsink factory installed 477 E9 2 115
1/100-3 (a) BC142 Standard Model, single voltage 202 E9 2 230
1/100 - 3 BC142-SIH BC142 with BC152 Signal Isolator and
BC143 Heatsink factory installed 499 E9 2 230
1/100-1 1/2 (a)
1/50-3 BC142-5 Dual voltage, without fuse holders 225 E9 1 115/230
1/100 - 1 1/2 (a)
1/50 - 3 BC142-6 Standard Model, dual voltage 224 E9 1 115/230
1/100 - 1 1/2
1/50 - 3 BC142-6SIH BC142-6 with BC152 signal isolator board and
BC143 heatsink factory installed 499 E9 1 115/230
5BC155 230V - 5 Hp 660 E9 5 230
258
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
1/4 thru 2 Hp 115/230 VAC Single Phase 50/60 Hz.
3 Hp 230 VAC Single Phase 50/60 Hz.
Applications: Constant torque, new or replacement.
Features: BC154, BCWD140 and BC160 are non-regen controls with reversal
by means of switching the armature leads (BCWD140 has a forward/brake/
reverse switch mounted). BC254 is a line regenerative SCR control that can
drive the motor to a timed stop. BC354 is a PWM control that provides low-
ripple DC power to the motor allowing more Hp when used with a 130 or 260
VDC motor. All offer a choice of armature or tachometer feedback and a speed
or torque mode. No Hp resistors are needed for these controls, current is jumper
selectable. BC154, BC160, BC254 and BC354 are painted black and come with
a start-stop switch. BCWD140 comes with white epoxy paint and also forward/
brake/reverse and run-jog switches. See page 330 for features.
NEMA 4X DC
Control
and Accessories
DC SCR NEMA 4X DC Control Accessories
Catalog
Number Description List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
BC153 Electronic Forward-Dynamic Brake-Reverse Kit for BC154, BC354 223 E9 1
BC156 Mechanical Forward-Dynamic Brake-Reverse Switch for BC154, BC354 145 E9 1
BC157 Run/Jog switch for BC154 & BC160, BC354 27 E9 1
BC158 Auto/Manual Installation Kit for BC145 signal isolator for BC154, BC160, BC354 60 E9 1
BC159 AC Line Switch Kit for BC154, BCWD140, BC254, BC354 32 E9 1
BC145 Signal Isolator Board 211 E9 1
NOTE: BC159 AC Line Switch Kit is factory installed on BC154, BCWD140, BC354. Listed here as replacement or spare parts.
NOTE: (a) See page 329 for BC254 accessories.
(b) Output current is 7.5 amps; Output voltage is 130VDC for 115VAC input - 260VDC for 230VAC input. Motors designed for these voltages will give the best performance.
Hp
Range
Catalog
Number
Description
Input Voltage / Max. Hp
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Input
Voltage
NEMA 4X SCR (black)
1/4-2
BC154 Standard model - 120V - 1 Hp, 230V - 2 Hp 467 E9 5 115/230
BC154-P BC154 with POWER SWITCH instead of START/STOP SW. 467 E9 5 115/230
BC154-R BC154 with BC156 - FBR Switch factory installed 616 E9 5 115/230
BC154-SI BC154 with BC145 Signal Isolator Board and BC158
Auto/Man Switch kit factory installed 751 E9 5 115/230
3BC160 120V - 1.5 Hp, 230V - 3 Hp 537 E9 3 115/230
NEMA 4X Washdown Duty SCR (white)
1/4-2 BCWD140 120V - 1 Hp, 230V - 2 Hp 625 E9 6 115/230
NEMA 4X Washdown Duty Line Regen SCR (black)
1/8-2 BC254 120V - 1 Hp, 230V - 2 Hp (a) 673 E9 5 115/230
BC254-FBR BC254 with BC253 FWD-BRAKE-REV switch factory installed 706 E9 5 115/230
NEMA 4X Washdown Duty PWM DC (black) (b)
1/4-2 BC354 120V - 1 Hp, 230V - 2 Hp 723 E9 5 115/230
259
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
1/4 thru 3 Hp 115/230 VAC Single Phase 50/60 Hz.
5 Hp 230 VAC Single Phase 50/60 Hz.
Applications: Frequent start/stop/reverse applications or where controlled
braking is required.
Features: Single phase line regenerative open chassis control to operate
permanent magnet or wound field DC motors. These line regen controls are
ideal for applications with overhauling loads. In torque mode, it can be used
for tensioning applications. Several accessory boards are available to further
customize the control. Includes 5k speed potentiometer. Jumper selectable
current settings.
Line Regenerative
DC Controls and
Accessories
NOTE: (a) 1 Hp at 115 volts and 2 Hp at 230 volts requires BC143 heatsink kit.
Hp
Range
Catalog
Number
Description
Input Voltage / Max. Hp
List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Input
Voltage
Line Regen SCR
1/8-2 (a)
BC204 120V 1 Hp, 230V 2 Hp, Standard Model 377 E9 3
115/230
BC204-BPSI BC204 with BC215 Bi-polar Signal Isolator
factory installed 487 E9 3
1/4-2 BC200 120V 1 Hp, 230V 2 Hp 704 E9 4 115/230
1/4-3 BC201 120V 1-1/2 Hp, 230V 3 Hp 836 E9 1 115/230
5BC203 230V 5Hp 1,052 E9 10 230
NEMA 4X Washdown Duty Line Regen SCR
1/8-2
BC254 120V - 1Hp, 230V - 2Hp Standard Model 673 E9 5 115/230
BC254-FBR
BC254 with Power On/Off switch instead of Start/
Stop switch, and BC253. Forward-Brake-Reverse
switch factory installed
706 E9 5 115/230
Line Regenerative DC Control Accessories
Catalog
Number Description List
Price
Mult.
Sym.
Ap’x.
Shpg.
Wgt.
Accessories for BC200, BC201 and BC203
BC212 Bipolar signal isolator board 216 E9 1
Accessories for BC204
BC143 External Heatsink Kit 72 E9 2
BC215 Bipolar signal isolator board 100 E9 3
BC216 Multispeed board for BC204 77 E9 1
BC218 DIN rail mounting kit 36 E9 1
Accessories for BC254
BC245 Bipolar signal isolator for BC254 213 E9 1
BC253 Forward-Stop-Brake-Reverse Switch for BC254 27 E9 1
BC258 Auto-manual Switch for BC254 60 E9 1
BC259 AC Line Switch for BC254 27 E9 5
260
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors Brake Motors 200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
NEMA Enclosed DC Control Specifications
Features
Catalog Number
BC138 BC139 BC140 or
BC140-FBR BC154 BC160 BCWD140
Enclosure NEMA 1 NEMA 1 NEMA 1 NEMA 4X NEMA 4X NEMA 4X
Washdown
Control Type NEMA K NEMA K NEMA K NEMA K NEMA K NEMA K
AC Line Input 115 230 115 230 115 230 230 115 230
DC Armature Voltage Nominal 90 180 90 180 90 180 180 90 180
Shunt Field Power Supply
Voltage - DC 50/100 100/200 50/100 100/200 50/100 100/200 100/200 50/100 100/200
Rated Horsepower Range 1/100 - 1/3 1/50-3/4 1/100-1 1/50-2 1/50-1 1/25-2 3 1/50-1 1/25-2
External Heat Sink
(BC143) Required No No 1 Hp 2Hp Not
Required
Not
Required
Not
Required
Speed Range (Motor May Be
20: 1 Constant Torque) 50:1 50:1 50:1 50:1 50:1 50:1
Adjustable Acceleration Time Yes Yes Yes Yes Yes Yes
Adjustable Deceleration Time Yes Yes Yes Yes Yes Yes
Minimum Speed Adjustable Yes Yes Yes Yes Yes Yes
Maximum Speed Adjustable Yes Yes Yes Yes Yes Yes
Current Limit Adjustable Yes Yes Yes Yes Yes Yes
Adjustable Current Limit and
Trip Out Type No No No Timed or
Non-Timed
Timed or
Non-Timed
Timed or
Non-Timed
Control Of Speed or Torque Speed Speed Speed Speed or
Torque
Speed or
Torque
Speed or
Torque
IR Compensation Adjustable Yes Yes Yes Yes Yes Yes
Tachometer Feedback Input No No No Yes Yes Yes
Plug-In Horsepower Resistor ® Required Required Required N/A N/A N/A
UL & cUL Listing, CE Yes Yes Yes Yes Yes Yes
AC Line Fuse Included Included Included External External External
DC Armature Fuse
Included
with
Hp Resistor
Included
with
Hp Resistor
Included
with
Hp Resistor
Not Supplied
with
Control
External
Not Supplied
with
Control
Options
AC Line Switch Standard Standard Standard Opt - BC159 No Standard
Forward/Brake/Reverse Switch
Mechanical
Electronic
No
No
No
No
Opt-BC144
No
Opt-BC156
Opt-BC153
No
No
Standard
Opt-BC153
Run/Jog Switch No No No Opt-BC157 Opt-BC157 Standard
Input Signal
Following Mode Capability
Current (1-5, 4-20, 20-50mA) No No
External Mount
Opt-BC145
Internal Mount
Opt-BC145
Internal Mount
Opt-BC145
Internal Mount
Opt-BC145
Voltage (0-25,0-120, 0-550 VDC) Opt-BC145 (0-5, 0-10 VDC)
input standard
(0-5, 0-10 VDC)
input standard
(0-5, 0-10 VDC)
input standard
Electrical Connection To Control
Barrier Terminal Block Standard Standard Standard Standard Standard Standard
Current Sensing Relay/Overload
Protector No No Opt - BC146
External Mount Standard Standard Standard
AC Line Filter for CE Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF
261
DC Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling
Motors
Brake Motors200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Starters &
Dynamic Brakes
Chassis Mount DC Control Specifications
Features Catalog Number
BC141 BC142 BC142-6 BC155 BC204 BC200 BC201 BC203
Enclosure Chassis Chassis Chassis Chassis Chassis Chassis Chassis Chassis
Control Type NEMA K NEMA K NEMA K NEMA K Regenerative Regenerative Regenerative Regenerative
AC Line Input 115 230 115 230 230 115 230 115 230 115 230 230
DC Armature Voltage Nominal 90 180 90 180 180 90 180 90 180 90 180 180
Shunt Field Power Supply
Voltage - DC 50/100 100/200 50/100
100/200
50/100
100/200
50/100
100/200
50/100
100/200 100/200 100/200
Rated Horsepower Range 1/100-1.5 1/50-3 1/100-1 1/2
1/50-3 51/8-1
1/4-2
1/4-1
1/2-2
1/4-1-1/2
1/2-3 5
External Heat Sink
(BC143) Required 1 Hp-Up 2 Hp-Up 1/2 Hp-Up
1 Hp-Up
Not
Required
90V-1Hp
180V-2Hp
Not
Required
Not
Required
Not
Required
Speed Range (Motor may
be 20:1Constant Torque) 50:1 50:1 50:1 50:1 50:1 50:1 50:1 50:1
Adjustable Acceleration Yes Yes Yes Yes Yes
Fwd & Rev
Yes
Fwd & Rev
Yes
Fwd & Rev
Yes
Fwd & Rev
Adjustable Deceleration Yes Yes Yes Yes Regen Regen Regen Regen
Min.. Speed Adjustable Yes Yes Yes Yes No No No No
Max. Speed Adjustable Yes Yes Yes Yes Yes Yes Yes Yes
Adjustable Current
Limit and Tripout Type
Non
Timed
Non
Timed
Non
Timed
Non
Timed
Non
Timed Timed Timed Timed
Control of Speed or
Torque Speed Speed Speed Speed
Torque
Speed or
Torque
Speed or
Torque
Speed or
Torque Speed
IR Compensation Adjustment Yes Yes Yes Yes Yes Yes Yes Yes
Tachometer Feedback Input Yes Yes Yes Yes Yes Yes Yes Yes
Plug-in Horsepower Resistor®Required Required Required N/A N/A N/A N/A N/A
UL & cUL Listing, CE Yes Yes Yes Yes Yes Yes Yes Yes
AC Line Fuse Included Included Included External External Included Included External
DC Armature Fuse
Included
with Hp
Resistor
Included
with Hp
Resistor
Included
with Hp
Resistor
Included
with Hp
Resistor
External N/A N/A External
Options
Input Signal Following Mode
Capability
Current (4-20 mA) Plug on Mount
Opt-BC152
Plug on Mount
Opt-BC152
Plug on Mount
Opt-BC152 External Mount
Opt-BC145 No No No No
Current (1-5, 4-20, 20-50 mA) External Mount
Opt-BC145
External Mount
Opt-BC145
External Mount
Opt-BC145
Input Signal Voltage
(must be isolated)
0-9 VDC
Standard
0-9 VDC
Standard
0-9 VDC
Standard
0-9 VDC
Standard
0 to ± 10 VDC
Standard
0 to ± 10 VDC
Standard
0 to ± 10 VDC
Standard
0 to ± 10 VDC
Standard
Voltage (0-5, 0-10, 0-100,
0-200, VDC)
Plug on Mount
Opt-BC152
Plug on Mount
Opt-BC152
Plug on Mount
Opt-BC152 External Mount
Opt-BC145
±5 to ±25 VDC
Opt-BC215
±25 to ±250 VDC
Opt-BC212
±25 to ±250 VDC
Opt-BC212
±25 to ±250 VDC
Opt-BC212
Voltage (0-25, 0-120, 0-550 VDC) External Mount
Opt-BC145
External Mount
Opt-BC145
External Mount
Opt-BC145
Electrical Connection
To Control
Push-On Quick Connects
Barrier Terminal Block
Standard
Opt-BC147
Standard
Opt-BC147
Standard
Opt-BC147
No
Standard
Standard
N/A
No
Standard
No
Standard
No
Standard
Current Sensing Relay/
Overload Protector Opt-BC146 Opt-BC146 Opt-BC146 Opt-BC146 N/A Standard Standard No
Standard
Regenerative
Accel / Decel Board No No No No No Opt - BC211 Opt - BC211 Opt - BC211
AC Line Filter for CE Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF Opt-BC24-LF
