Spec Sheet_A4_V__
2014-07-04
: Pdf 673038-Attachment 673038-Attachment 009602 Batch5 unilog
Open the PDF directly: View PDF 
.
Page Count: 31
3 Fibre Termination
3.1. UniCam
3.2. Anaerobic
3.3. Furcation Kit
3.1.1. UniCam Pretium
3.1.2. UniCam Standard
3.1.3. UniCam 250 μm
3.2.1. Anaerobic Connectors
3.2.2. Anaerobic Tool Kit
3.3.1. Buffer Tube Fan Out
3.3.2. Ribbon
3.1.4. UniCam SC-APC
3.1.6. UniCam Tool Kit
3.3.3. Spider Fan Out
3.4. Camsplice
3.1.5. UniCam MTP
Data sheet
Unicam Pretium SC, ST and LC / November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field Installable Connectors
Product: UniCam® Pretium ST, SC and LC Connectors
Fibre: InfiniCor®SX+ OM3, InfiniCor®600 OM2, InfiniCor®300 OM1, SMF-28e+™ OS2
Description
The UniCam® Pretium Connector is the ideal solution
for all your field-installable fibre optic connector re-
quirements. The quick installation reduces the total
installed cost of connectorization, making the UniCam
Connector cost-effective for all fibre applications,
from the main cross-connect to the workstation. The
UniCam Connector can best be described as a mini
pigtail. It incorporates a factory-installed fibre stub
that is fully bonded in the ferrule. The other end is
precisely cleaved and placed into the patented
alignment mechanism of a mechanical splice. Both
the field fibre and fibre stub are fully protected from
environmental factors. Unlike other no epoxy, field-
installable connectors, the UniCam Connector
requires no polishing.
The unique features of the Unicam are the accuracy
of the factory polished end face process, 100%
quality control of every connector and the visual
feedback system during field installation.
Applications
All field-installable UniCam® Pretium connector
versions provide a high-quality alternative to epoxy
and polish connectors. They provide simple, quick
and reliable connector installation on site. Fibre stubs
are pre-installed in the ferrules of the UniCam
connectors at the factory, thus eliminating the critical
epoxy and polish operations in the field. This
approach also allows the necessary high quality,
controlled end face processing to be performed as
part of the production process in the factory, thus
reducing field technician influence to a minimum. On
site, the stripped and cleaved field fibres are inserted
into the UniCam connectors and retained. A
mechanical splice inside the connector establishes
the low-loss connection between the field fibre and
the preinstalled fibre inside the connector.
Features / Benefits
- Fastest termination time in the industry: less than
1 min with single fibre connector
- Continuity- Test-Set gives immediate go/no go
feedback of successful termination
3-D view from polished end face of a Unicam connector
Data sheet
Unicam Pretium SC, ST and LC / November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Characteristics
Connector type ST/PC SC/PC LC/PC
Ferrule Ceramic Ceramic Ceramic
Connector body Composite Composite Composite
Insertion loss, typical (dB) MM 0.10 0.10 0.10
Insertion loss, max. (dB) MM 0.50 0.50 0.50
Reflectance Multimode typical
(dB) MM PC OM1/OM2 -20 -20 -20
Reflectance Multi Mode typical
(dB) MM PC OM3 -26 -26 -26
Insertion loss, typical (dB) SM 0.20 0.20 0.20
Insertion loss, max. (dB) SM 0.50 0.50 0.50
Reflectance Single-Mode
typical (dB) MM UPC -55** -55** -55**
Cycling to FOTP-21 0.2 dB, 500 cycles
Max. Tensil load Connector 44N on 2.0mm and 2.8mm Legs / Cable
Max. Tensil load Connector 4N on 900µm Legs / Tight Buffer
Temperatur in operation -40°C to 75°C
Temperature cycling to FOTP-3 IL 0.3 dB, -40 – +75 °C, 21 cycles
* The insertion loss values is only for using Unicam Pretium Tool Kit. When using the standard Tool Kit the values are
0,3dB typical and 0.75 maximum.
** Please Note: The reflectance values are for 18° to 26° C
Connectors according to standard
SC TIA/EIA 604-3 / IEC 61754-4
ST compatible TIA/EIA 604-2 / IEC 61754-2
LC TIA/EIA 604-10A / IEC 61754-20
Connector Identification according to EIA/TIA-568-C.3 Draft 2006
Colour code: Housing Boot
OM3 (50m) Black Aqua
OM2 (50m) Black Black
OM1 (G62,5µm) Beige Black
OS1/OS2 (E9) UPC Blue Blue
Contents Single pack
Connector type Connector Crimp ring Boot 900µm Boot 2.0mm Boot 2.8mm
SC X X X X
ST compatible X X X X
LC X X X X X
Data sheet
Unicam Pretium SC, ST and LC / November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Optical Characteristics of fibres:
Laser optimised multi-mode fibre 50/125 µm, InfiniCor®SX+ OM3
Laser bandwidth at 850 nm: 2000 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAC-A, IEC 60793-2-10 Type A1a.2, ISO/IEC 11801 OM3.
Fibre tested using minEMBc method, according to TIA/EIA 455-220, IEC 60793-2-10 Ed 2.0 and
IEC 60793-1-49 Ed 2.0.
Laser optimised multi-mode fibre 50/125 µm, InfiniCor®600 OM2
Laser bandwidth at 850 nm: 585 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAB; IEC 60793-2-10 Type A1a.1; ISO/IEC 11801 OM2.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised multi-mode fibre 62.5/125 µm, InfiniCor®300 OM1
Laser bandwidth at 850 nm: 220 MHz·km
Fibre core diameter: 62.5 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAA; IEC 60793-2-10 Type A1b.1; ISO/IEC 11801 OM1.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised single-mode fibre 9/125 µm, SMF 28e+™ OS2
Mode-Field diameter at 1310: 9.2 + 0.4 µm
Mode-Field diameter at 1550: 10.4 + 0.5 µm
Fibre meets or exceeds standards: TIA/EIA 492-CAAB, IEC 60793-2-50 Type B1.3, ISO/IEC 11801 OS2,
Telcordia GR20.
Order information
SC
Ordering number Description SC Connectors Fibre type
95-000-41 Unicam SC-Connector with Ceramic ferrule, Multimode 62,5µm OM1
95-050-41 Unicam SC-Connector with Ceramic ferrule, Multimode 50µm OM2
95-050-41-X Unicam SC-Connector with Ceramic ferrule, Multimode 50µm OM3
95-200-42 Unicam SC/UPC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
ST
Ordering number Description ST Connectors Fibre type
95-000-51 Unicam ST-Connector with Ceramic ferrule, Multimode 62,5µm OM1
95-050-51 Unicam ST-Connector with Ceramic ferrule, Multimode 50µm OM2
95-050-51-X Unicam ST-Connector with Ceramic ferrule, Multimode 50µm OM3
95-200-52 Unicam ST/UPC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
LC
Ordering number Description LC Connectors Fibre type
95-000-99 Unicam LC-Connector with Ceramic ferrule, Multimode 62,5µm OM1
95-050-99 Unicam LC-Connector with Ceramic ferrule, Multimode 50µm OM2
95-050-99-X Unicam LC-Connector with Ceramic ferrule, Multimode 50µm OM3
95-200-99 Unicam LC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
Minimum Order Quantity in multiples of 25 pce
Data sheet
Unicam Classic SC, ST, FC & MT-RJ/ November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field Installable Connectors
Product: UniCam® Classic ST, SC, FC & MT-RJ Connectors
Fibre: InfiniCor®SX+ OM3, InfiniCor®600 OM2, InfiniCor®300 OM1, SMF-28e+™ OS2
Description
The UniCam® Standard Connectors are the ideal
solution for all your field-installable fibre optic
connector requirements. The quick installation
reduces the total installed cost of connectorization,
making the UniCam Connector cost-effective for all
fibre applications, from the main cross-connect to the
workstation. The UniCam Connector can best be
described as a mini pigtail. It incorporates a factory-
installed fibre stub that is fully bonded in the ferrule.
The other end is precisely cleaved and placed into the
patented alignment mechanism of a mechanical
splice. Both the field fibre and fibre stub are fully
protected from environmental factors. Unlike other no
epoxy, field-installable connectors, the UniCam
Connector requires no polishing.
The unique features of the Unicam are the accuracy
of the factory polished end face process, 100%
quality control of every connector and the visual
feedback system during field installation.
Applications
The field-installable UniCam® connector versions
provide a high-quality alternative to epoxy and polish
connectors. They provide simple, quick and reliable
connector installation on site. Fibre stubs are pre-
installed in the ferrules of the UniCam connectors at
the factory, thus eliminating the critical epoxy and
polish operations in the field. This approach also
allows the necessary high quality, controlled end face
processing to be performed as part of the production
process in the factory, thus reducing field technician
influence to a minimum. On site, the stripped and
cleaved field fibres are inserted into the UniCam
connectors and retained. A mechanical splice inside
the connector establishes the low-loss connection
between the field fibre and the preinstalled fibre
inside the connector.
Features / Benefits
- Fastest termination time in the industry: less than
1 min with single fibre connector
- Fastest termination time in the industry: less than
3 min with MTRJ connector
- Continuity- Test-Set gives immediate go/no go
feedback of successful termination
- Minimal tool kit, reduced setup time; universal
assembly tool terminates all single- and 2-fiber
UniCam Connector styles
3-D view from polished endface of a Unicam connector
Data sheet
Unicam Classic SC, ST, FC & MT-RJ/ November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Characteristics
Connector type ST/PC SC/PC FC/PC MTRJ
Connector body Composite Composite Composite Composite
Ferrule multimode Composite Composite Ceramic Composite
Insertion loss, typical (dB) MM 0.30 0.30 0.30 0.30
Insertion loss, max. (dB) MM 0.75 0.75 0.75 0.75
Reflectance Multimode typical
(dB) MM PC OM1/OM2 -20 -20 -20 -20
Reflectance Multi Mode typical
(dB) MM PC OM3 - - - -20
Ferrule singlemode Ceramic Ceramic Ceramic Composite
Insertion loss, typical (dB) SM 0.20* 0.20* 0.30 -
Insertion loss, max. (dB) SM 0.50* 0.50* 0.75 -
Reflectance Single-Mode typical
(dB) MM UPC - - -55** -
Reflectance Single-Mode typical
(dB) MM SPC -40** -40** -40** -
Cycling to FOTP-21 0.2 dB, 500 cycles
Max. Tensil load Connector 44N on 2.0mm and 2.8mm Legs / Cable
Max. Tensil load Connector 4N on 900µm Legs / Tight Buffer
Temperatur in operation 0°C to 60°C
Temperature cycling to FOTP-3 IL 0.3 dB, -40 – +75 °C, 21 cycles
* The insertion loss values is only for using Unicam Pretium Tool Kit. When using the standard Tool Kit the values are
0,3dB typical and 0.75 maximum.
** Please Note: The reflectance values are for 18° to 26° C
Connectors according to standard
SC TAI/EIA 604-3 / IEC 61754-4
ST compatible TAI/EIA 604-2 / IEC 61754-2
FC TAI/EIA 604-4 / IEC 61754-13
MT-RJ TAI/EIA 604-12 / IEC 61754-18
Connector Identification according to EIA/TIA-568-C.3 Draft 2006
Colour code: Housing Boot
OM3 (50m) Black Aqua
OM2 (50m) Black Black
OS2 (E9) Blue Blue
OS1/OS2 (E9) SPC Blue White
Contents Single pack
Connector type Connector Crimp ring Boot 900µm Boot 2.0mm Boot 2.8mm
SC X X X X
ST compatible X X X X
FC X X X X
MT-RJ X X X
Data sheet
Unicam Classic SC, ST, FC & MT-RJ/ November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Optical Characteristics of fibres:
Laser optimised multi-mode fibre 50/125 µm, InfiniCor®SX+ OM3
Laser bandwidth at 850 nm: 2000 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAC-A, IEC 60793-2-10 Type A1a.2, ISO/IEC 11801 OM3.
Fibre tested using minEMBc method, according to TIA/EIA 455-220, IEC 60793-2-10 Ed 2.0 and
IEC 60793-1-49 Ed 2.0.
Laser optimised multi-mode fibre 50/125 µm, InfiniCor®600 OM2
Laser bandwidth at 850 nm: 585 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAB; IEC 60793-2-10 Type A1a.1; ISO/IEC 11801 OM2.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised multi-mode fibre 62.5/125 µm, InfiniCor®300 OM1
Laser bandwidth at 850 nm: 220 MHz·km
Fibre core diameter: 62.5 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAA; IEC 60793-2-10 Type A1b.1; ISO/IEC 11801 OM1.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised single-mode fibre 9/125 µm, SMF 28e+™ OS2
Mode-Field diameter at 1310: 9.2 + 0.4 µm
Mode-Field diameter at 1550: 10.4 + 0.5 µm
Fibre meets or exceeds standards: TIA/EIA 492-CAAB, IEC 60793-2-50 Type B1.3, ISO/IEC 11801 OS2,
Telcordia GR20.
Data sheet
Unicam Classic SC, ST, FC & MT-RJ/ November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Order Information
SC
Ordering number Description SC Connectors Fibre type
95-000-40 Unicam SC-Connector with composite ferrule, Multimode 62,5µm OM1
95-050-40 Unicam SC-Connector with composite ferrule, Multimode 50µm OM2
95-200-41 Unicam SC/SPC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
ST
Ordering number Description ST Connectors Fibre type
95-000-50 Unicam ST-Connector with composite ferrule, Multimode 62,5µm OM1
95-050-50 Unicam ST-Connector with composite ferrule, Multimode 50µm OM2
95-200-51 Unicam ST/SPC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
FC
Ordering number Description FC Connectors Fibre type
95-000-61 Unicam FC-Connector with Ceramic ferrule, Multimode 62,5µm OM1
95-200-61 Unicam FC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
95-200-62 Unicam FC-Connector with Ceramic ferrule, Single-mode 9µm OS1/OS2
*Please Note: This Connector may not be used with Unicam Pretium Tool Kit
MT-RJ with Pins
Ordering number Description MT-RJ Connectors with pins Fibre type
92-001-97-P-E Unicam MT-RJ Connector with pins Composite ferrule, Multimode 62,5µm OM1
92-051-97-P-E Unicam MT-RJ Connector with pins Composite ferrule, Multimode 50µm OM2
92-051-97-P-E-X Unicam MT-RJ Connector with pins Composite ferrule, Multimode 50µm OM3
*Please Note: This Connector may not be used with Unicam Pretium Tool Kit
MT-RJ without Pins
Ordering number Description MT-RJ Connectors without pins Fibre type
92-001-97-NP-E Unicam MT-RJ Connector without pins Composite ferrule, Multimode 62,5µm OM1
92-051-97-NP-E Unicam MT-RJ Connector without pins Composite ferrule, Multimode 50µm OM2
92-051-97-NP-E-X Unicam MT-RJ Connector without pins Composite ferrule, Multimode 50µm OM3
*Please Note: This Connector may not be used with Unicam Pretium Tool Kit
Minimum Order Quantity in multiples of 25 pce
Data sheet
Unicam 250µm Pretium SC, LC / November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field Installable Connectors
Product: UniCam® 250µm PretiumTM SC and LC connectors
Fibre: InfiniCor®OM3, InfiniCor®OM2, InfiniCor®OM1, SMF-28+™ OS2
Description
The UniCam® 250µm connector is the ideal solution
for field-installable fibre optic connector requirements
on 250µm bare fibres. The quick installation reduces
the total installed cost of connectorization, making the
UniCam connector cost-effective for all fibre
applications, from the main cross-connect to the
workstation. The UniCam connector can best be
described as a mini pigtail. It incorporates a factory-
installed fibre stub that is fully bonded in the ferrule.
The other end is precisely cleaved and placed into the
patented alignment mechanism of a mechanical
splice. Both the field fibre and fibre stub are fully
protected from environmental factors. Unlike other
no-epoxy, field-installable connectors requires the
UniCam connector no polishing.
The unique features of the Unicam are the accuracy
of the factory polished end face process, 100%
quality control of every connector and the visual
go/no go feedback system during field installation.
Applications
The field-installable UniCam® 250µm connector
versions provide a high-quality, quick and reliable
connector installation on site. The direct termination
on loose- or central tube cables with standard 250µm
fibres do not require additional accessories. The high
quality end face, controlled during the production
process in the factory, reduces field technician
influence to a minimum. On site, the stripped and
cleaved field fibres are inserted into the UniCam
connectors and retained. A mechanical splice inside
the connector establishes the low-loss connection
between the field fibre and the preinstalled fibre
inside the connector.
Features / Benefits
- Fastest termination time in the industry:
Less than 1 min with single fibre possible
- Pretium Tool Kit gives immediate go/no go
feedback of successful termination
- Minimal Unicam Pretium Tool Kit allows reduced
setup time; universal assembly tool terminates all
LC and SC UniCam Connector directly on 250µm
bare fibres
- Dimensions for fibre preparation are printed on the
connector kit package 3-D view from polished endface of a Unicam connector
Factory-made high-performance polishing
Cam splice
Pre-assembled fibre
Field insert fibre
Data sheet
Unicam 250µm Pretium SC, LC / November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Characteristics
Connector type SC LC
Ferrule Ceramic Ceramic
Connector body Composite Composite
Insertion loss*, typical (dB) MM 0.1* 0.1*
Insertion loss*, maximum (dB) MM 0.5* 0.5*
Reflectance**Multimode typical (dB)
MM/PC OM1/OM2 -20 -20
Reflectance** Multi Mode typical (dB)
MM/PC OM3 -26 -26
Insertion loss*, typical (dB) SM* 0.2 0.2
Insertion loss*, maximum (dB) SM* 0.5 0.5
Reflectance**Single-Mode typical
(dB) SM/UPC OS2 -55** -55**
Cycling to FOTP-21 0.2 dB, 500 cycles
Max. Tensil load Connector 2N on 250µm Bare fibre with 0.2 change
Temperatur in operation -40°C to 75°C
Temperature cycling to FOTP-3 IL 0.3 dB, -40 – +75 °C, 21 cycles
* The insertion loss values is only for using Unicam Pretium Tool Kit. When using the standard Tool Kit the values are
0,3dB typical and 0.75 maximum.
** Please Note: The reflectance values are for 18° to 26° C
Connectors according to standard
SC TAI/EIA 604-3 / IEC 61754-4
LC TAI/EIA 604-10A / IEC 61754-20
Connector Identification according to EIA/TIA-568-C.3 Draft 2006
Colour code: Housing Boot
OM3 (50m) Black Aqua
OM2 (50m) Black Black
OM1 (62.5m) Beige Beige
OS2 (E9) UPC Blue Blue
Contents Single pack
Connector type Connector / Housing /
Dust cab Tube Boot 900µm
SC X X X
LC X X X
Data sheet
Unicam 250µm Pretium SC, LC / November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Optical Characteristics of fibres:
Laser optimised multi-mode fibre 50/125 µm, InfiniCor®OM3
Laser bandwidth at 850 nm: 2000 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAC-A, IEC 60793-2-10 Type A1a.2, ISO/IEC 11801 OM3.
Fibre tested using minEMBc method, according to TIA/EIA 455-220, IEC 60793-2-10 Ed 2.0 and
IEC 60793-1-49 Ed 2.0.
Laser optimised multi-mode fibre 50/125 µm, InfiniCor®OM2
Laser bandwidth at 850 nm: 585 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAB; IEC 60793-2-10 Type A1a.1; ISO/IEC 11801 OM2.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised multi-mode fibre 62.5/125 µm, InfiniCor®OM1
Laser bandwidth at 850 nm: 220 MHz·km
Fibre core diameter: 62.5 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAA; IEC 60793-2-10 Type A1b.1; ISO/IEC 11801 OM1.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised single-mode fibre 9/125 µm, SMF 28e+™ OS2
Mode-Field diameter at 1310: 9.2 + 0.4 µm
Mode-Field diameter at 1550: 10.4 + 0.5 µm
Fibre meets or exceeds standards: TIA/EIA 492-CAAB, IEC 60793-2-50 Type B1.3, ISO/IEC 11801 OS2,
Telcordia GR20.
Order information
SC PretiumTM
Ordering number Description SC Connectors Fibre type
95-000-41P Unicam SC-Connector with Ceramic ferrule, Multimode 62,5µm OM1
95-050-41P Unicam SC-Connector with Ceramic ferrule, Multimode 50µm OM2
95-050-41P-X Unicam SC-Connector with Ceramic ferrule, Multimode 50µm OM3
95-200-42P Unicam SC/UPC-Connector with Ceramic ferrule, Single-mode 9µm OS2
LC PretiumTM
Ordering number Description LC Connectors Fibre type
95-000-99P Unicam LC-Connector with Ceramic ferrule, Multimode 62,5µm OM1
95-050-99P Unicam LC-Connector with Ceramic ferrule, Multimode 50µm OM2
95-050-99P-X Unicam LC-Connector with Ceramic ferrule, Multimode 50µm OM3
95-200-99P Unicam LC/UPC-Connector with Ceramic ferrule, Single-mode 9µm OS2
Minimum Order Quantity in multiples of 25 pce
Data sheet
UniCam Pretium SC/APC / October 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field Installable Connectors
Product: UniCam® Pretium SC - APC connectors (Pretium Tool Compliant)
Fibre: SMF-28+™ OS2
Description
The field-installable UniCam® APC connector is the
ideal solution to minimize back reflectance from laser
sources, a critical requirement for applications such
as analogue video. UniCam APC Connectors, with
their 8º angled end-face and factory polish,
dramatically reduce reflectance. The quick installation
reduces the total installed cost of connectorization,
making the UniCam connector cost-effective for all
fibre applications, from the main cross-connect to the
workstation. The UniCam connector can best be
described as a mini pigtail. It incorporates a factory-
installed fibre stub that is fully bonded in the ferrule.
The other end is precisely cleaved and placed into the
patented alignment mechanism of a mechanical
splice. Both the field fibre and fibre stub are fully
protected from environmental factors. Unlike other
no-epoxy, field-installable connectors requires the
UniCam connector no polishing.
The unique features of the UniCam are the accuracy
of the factory polished end face process, 100%
quality control of every connector and the visual
go/no go feedback system during field installation.
Applications
The field-installable UniCam® APC connector
versions provide a high-quality, quick and reliable
connector installation on site. The direct termination
on tight buffer, loose- or central tube cables do not
require any additional accessories. The high quality
end face, controlled during the production process in
the factory, reduces field technician influence to a
minimum. On site, the stripped and cleaved field
fibres are inserted into the UniCam connectors and
retained. A mechanical splice inside the connector
establishes the low-loss connection between the field
fibre and the preinstalled fibre inside the connector.
Features / Benefits
- Fastest termination time in the industry:
Less than 1 min with single fibre possible
- Pretium Tool Kit gives immediate go/no go
feedback of successful termination
- Minimal UniCam Pretium Tool Kit allows reduced
setup time; universal assembly tool terminates all
SC UniCam Connector directly on 250µm bare
fibres or tight buffer
- Dimensions for fibre preparation are printed on the
connector kit package
Factory-made high-performance polishing
Cam splice
Pre-assembled fibre
Field insert fibre
Data sheet
UniCam Pretium SC/APC / October 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008 Corning Cable Systems. All rights reserved. Published in the EU.
Characteristics
Connector type SC/APC
Ferrule Ceramic
Connector body Composite
Insertion loss, typical (dB) at 18 - 26° 0.40
Insertion loss, maximum (dB) at 0° - 60° 0.75
Reflectance typical (dB) at 18 - 26° -60
Reflectance maximum (dB) at 0° - 60° -40
Cycling to FOTP-21 0.2 dB, 500 cycles
Max. Tensile load Connector 0.2 change 2N on 250µm Bare fibre, 4N on 900um, 44N on cable
Temperature in operation 0°C to 60°C , meets TIA/EIA 568-B.3
*Please Note: This values are only valid when utilizing the FBC-015 cleaver (blue). Cleaving values: 1° +/- 1°
Connectors according to standard
SC TAI/EIA 604-3 / IEC 61754-4
Connector Identification according to EIA/TIA-568-C.3 Draft 2006
Colour code: Housing Boot
OS2 (E9) APC Green Green
Contents Single pack
Connector type Connector /
Housing /
Dust cab
Tube Boot 900µm Boot 2.0mm Boot 2.9mm
SC/APC X X X
SC/APC 250 X X X
Optical Characteristics of fibres:
Laser optimised single-mode fibre 9/125 µm, SMF 28+™ OS2
Mode-Field diameter at 1310: 9.2 + 0.4 µm
Mode-Field diameter at 1550: 10.4 + 0.5 µm
Fibre meets or exceeds standards: TIA/EIA 492-CAAB, IEC 60793-2-50 Type B1.3, ISO/IEC 11801 OS2,
Telcordia GR20.
Order information
SC PretiumTM
Ordering number Description SC Connectors Fibre type
95-200-44 UniCam SC/APC-Connector with Ceramic ferrule, single pack OS2
95-200-44-Z UniCam SC/APC-Connector with Ceramic ferrule, organizer pack OS2
95-200-44P UniCam SC/APC-250µm Connector with Ceramic ferrule, single pack OS2
95-200-44P-Z UniCam SC/APC-250µm Connector with Ceramic ferrule, organizer pack OS2
Minimum Order Quantity in multiples of 25 pce
Data sheet
Unicam MTP/ November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field Installable Connectors
Product: UniCam® MTP connectors
Fibre: InfiniCor®OM3, InfiniCor®OM2, InfiniCor®OM1, SMF-28+e™ OS2
Description
The Corning Cable Systems UniCam® MTP®
Connector is the latest innovation in the proven
UniCam Connector family. It is the first no epoxy /
no-polish, field-installable 12-fibre connector in the
industry. It is the ideal solution for applications using
12-fibre ribbons. The UniCam MTP Connector
utilizes the same reliable, proven no-epoxy/no
polish technology as all other Corning Cable
Systems UniCam Connectors. The UniCam MTP
Connector installs with the same push-pull reliability
as the familiar SC connector.
Application
The field-installable UniCam MTP connector
versions provide simple, quick and reliable
connector installation on site. Fibre stubs are pre-
installed in the ferrules of the UniCam connectors at
the factory, thus eliminating the critical epoxy and
polish operations in the field. On site, the stripped
and cleaved field fibres are inserted into the
UniCam MTP connectors and retained. A
mechanical splice inside the connector establishes
the low-loss connection between the field fibre and
the preinstalled fibre inside the connector. The
UniCam MTP connector is installable on bare ribbon
or ribbon interconnect cables.
Features / Benefits
- Repair of Plug & Play™ Systems trunk cables
- Terminates jacketed or bare 12-fiber ribbons in
less than five minutes
- Alignment achieved with precision guide pins
- IEEE-802.3, Fibre Channel and
ANSI/TIA/EIA-568 B.3 compliant
Data sheet
Unicam MTP/ November 2008
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2008Corning Cable Systems. All rights reserved. Published in the EU.
Characteristics
Parameter: Multimode & Single-Mode
Standard TAI/EIA 604-5
Insertion loss, typical (dB ≤ 0.5 dB typ. ≤ 1.0 dB max.
Reflectance Multi Mode typical
(dB) MM PC OM3 ≤ -20dB for Ultra PC
Reflectance Single-Mode typical
(dB) MM PC OS2 ≤ -55dB for Ultra APC
Cycling to FOTP-21 ≤ 0.2 dB, 200 cycles
Max. Tensil load Connector ≤10N Ribbon Inter connect
Temperature cycling to FOTP-3 IL 0.3 dB, -40 – +75 °C, 21 cycles
* Please Note: The reflectance values are for 18° to 28°
Optical Characteristics of fibres:
Laser optimised multimode fibre 50/125 µm, InfiniCor®OM3
Laser bandwidth at 850 nm: 2000 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAC-A, IEC 60793-2-10 Type A1a.2, ISO/IEC 11801 OM3.
Fibre tested using minEMBc method, according to TIA/EIA 455-220, IEC 60793-2-10 Ed 2.0 and
IEC 60793-1-49 Ed 2.0.
Laser optimised multimode fibre 50/125 µm, InfiniCor®OM2
Laser bandwidth at 850 nm: 585 MHz·km
Fibre core diameter: 50.0 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAB; IEC 60793-2-10 Type A1a.1; ISO/IEC 11801 OM2.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised multimode fibre 62.5/125 µm, InfiniCor®OM1
Laser bandwidth at 850 nm: 220 MHz·km
Fibre core diameter: 62.5 + 2.5 µm
Fibre meets or exceeds standards: TIA/EIA 492AAAA; IEC 60793-2-10 Type A1b.1; ISO/IEC 11801 OM1.
Fibre tested using RML method, according to TIA/EIA 455-204 and IEC 60793-1-41.
Laser optimised single-mode fibre 9/125 µm, SMF 28e+™ OS2
Mode-Field diameter at 1310: 9.2 + 0.4 µm
Mode-Field diameter at 1550: 10.4 + 0.5 µm
Fibre meets or exceeds standards: TIA/EIA 492-CAAB, IEC 60793-2-50 Type B1.3, ISO/IEC 11801 OS2,
Telcordia GR20.
Order information
Ordering number Fibre type Ferrule Housing Colour housing Colour boot
93-001-69 62.5µ/OM1 Composite without pins Composite Beige Beige
93-051-69 50µ/OM2 Composite without pins Composite Black Black
93-051-69-X 50µ/OM3 Composite without pins Composite Black Aqua
93-201-69 9µ/OS2 Composite without pins Composite Black/Green Green
93-001-70 62.5µ/OM1 Composite with pins Composite Beige Beige
93-051-70 50µ/OM2 Composite with pins Composite Black Black
93-051-70-X 50µ/OM3 Composite with pins Composite Black Aqua
93-201-70 9µ/OS2 Composite with pins Composite Black/Green Green
Quantity per delivery unit: 1/1
Data sheet
UniCam® Single and Two Fibre Connector Tool Kits/ May 2009
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2009 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field Installable Connectors Tool-Kits
Product: UniCam®Single Fibre Connectors Tool-Kits
Fibre: OM3 Pretium™ 300, OM2 Pretium™ 150, InfiniCor®300 OM1, SMF-28e™ OS1/OS2
Applications
The Corning Cable Systems’ UniCam® tool-kits are
intended for the installation of all Corning Cable
Systems’ UniCam® connectors.
Tool kits with different equipment are available also for
installation of a special group of connectors.
Description
Corning Cable Systems’ tool kits for field installable
connectors provide with a collection of essential tools
required for tasks associated with the termination of
fibre optic cable. The tools are thoughtfully assembled
and are stored in compact and easy to carry cases that
are lined with a foam-padding material in order to
protect the high-quality tools.
The TKT-UNICAM-PFC includes a lightweight,
handheld installation tool with an immediate go/no-go
feedback signal, providing unmistakable confirmation
of a successful termination. The kit’s high-performance
cleaver has an integrated fibre scrap bin and a dual-
clamp precision hold for the field fibre, with a diamond
blade to achieve a superior cleave. The UniCam
Pretium Tool Kit can be used with multimode or
singlemode LC, SC and ST® Compatible UniCam
Connectors (standard and Pretium-performance), and
is required to achieve Pretium-Performance
specifications for UniCam Pretium-Performance
singlemode Connectors.
The classic UniCam Connector Installation Tool Kit
(TKT-UNICAM) is a basic installation tool kit and can
be used to terminate all single- UniCam Connector
styles (SC, LC and ST compatible). UniCam Multimode
Connectors (SC, LC and ST compatible) can achieve
high-performance with the use of this tool.
The UniCam Connector Installation Tool Kit with
Continuity Test Set (TKT-UNICAM-CTS) provides a
visual feedback feature when terminating UniCam SC,
LC or ST Compatible Connectors. Useful for reducing
scrap rates or for training new installers, the TKT-
UNICAM-CTS-SF is very popular, since the installer
can watch for the red glow in the back of the connector
to dim or disappear. This indicates that the field fibre is
inserted properly in the connector.
UniCam
®
Pretium Tool Kit
UniCam
®
Basic Tool Kit
UniCam
®
CTS-SF Tool Kit
Data sheet
UniCam® Single and Two Fibre Connector Tool Kits/ May 2009
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2009 Corning Cable Systems. All rights reserved. Published in the EU.
Features / Benefits UniCam® Pretium™ Tool Kit
(TKT-UNICAM-PFC)
− Virtually eliminates human variability in installation,
ensuring consistent, reliable results
− UniCam Pretium Installation Tool uses a go/no go
LED to provide unmistakable confirmation of a
successful termination
− Pretium Cleaver uses dual-clamp precision and a
diamond blade for a superior cleave
− About 60 seconds per connector to install
− Sleek, well-organized carrying case with built-in
conveniences for easy, on-the-go field
terminations.
− Tool kit designed to allow work out of the bag,
eliminating set-up and tear-down time
− One kit terminates both singlemode and multimode
LC, SC and ST® Compatible Connectors
Standard UniCam SF Connector Installation Tool
Kit with Continuity Test Set (TKT-UNICAM-CTS-SF)
− Convenient carrying bag contains all of the
components necessary to terminate UniCam
Connectors
− Installs SC, LC and ST compatible connectors in
less than two minutes
− One kit terminates singlemode and multimode
UniCam
− Connectors CTS option reduces scrap rate and
helps train new installers
Standard UniCam Connector Installation Tool Kit
(TKT-UNICAM)
− Convenient carrying bag contains all of the
components necessary to terminate UniCam
Connectors
− Installs SC, LC and ST compatible connectors in
less than two minutes
− One kit terminates singlemode and multimode
UniCam
UniCam Pretium Handheld Tool
K
it
Pre
t
ium Cleaver
Elite
Installat
ion
Cleaver
1-2 Fibers
FBC-001
Cleaver
1-2 Fibers
FBC-001
Standard Score and Snap Cleaver
Data sheet
UniCam® Single and Two Fibre Connector Tool Kits/ May 2009
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2009 Corning Cable Systems. All rights reserved. Published in the EU.
Tool kits contents
Item Item code PFC CTS-SF Basic
Pretium UniCam®installation tool
with integrated CTS TL-UCP 1 pce - -
UniCam Standard Installation Tool TL-UC01 - 1 pce 1 pce
UniCam®CTS-SF complete TEST-UNICAM-CTS-SF - 1 Set -
VFL VFL-350 1 pce -
SC and ST® Compatible 2.5 mm VFL-A250 1 pce - -
LC Compatible 1.25 mm VFL-A125 1 pce - -
Pretium Flat Cleaver with Diamond
Blade and Built-In Fibre Scrap
Container FBC-15 1 pce - -
Fibre cleaver, score & snap FBC-001 - 1 pce 1 pce
Crimp tool, UniCam®aramide 3201007-01 1 pce 1 pce 1 pce
Stripper 6” wire Jensen tool 3206001-01 1 pce 1 pce 1 pce
“Dual-Hole” Miller Tool Fibre
Stripper (for 900 m and 250 m
fibre) 2104502-01 1 pce 1 pce 1 pce
Scissors 5” electrician 100294-01 1 pce 1 pce 1 pce
Tweezers 100312-01 - 1 pce 1 pce
Wipes alcohol 1508001-01 - 6 pce 6 pce
Retractable Permanent Marker Not sold separately 1 pce - -
Standard Capped Permanent Not sold separately - 1 pce 1 pce
SC and ST Compatible 2.5 mm
Ferrule Cleaning Sticks (10/pack) 2104255-01 1 Pack a
10pce - -
LC 1.25 mm Ferrule Cleaning Sticks
(10/pack) 2104417-01 1 Pack a
10pce - -
Package of Corning Wipes
(1Pak = 90sheets ) 2104493-01 1 pce - -
Bottle of Corning Fibre Cleaning
Fluid FCC-Cleaner-Fiber 1 pce - -
Electrical Tape,black 2104282-01 - 1 pce 1 pce
UniCam Pretium Tool Bag with
Integrated Waste Receptacle and
Organized Foam Insert Interior 02-001860-001 1 pce - -
Standard UniCam Tool Bag 2104407-01 - 1 pce 1 pce
Ordering information:
Type Description UniCam Pretium tool kit UniCam CTS-SF tool kit UniCam basic tool kit
Quantity/deliver unit 1/1 1/1 1/1
Ordering number TKT-UNICAM-PFC TKT-UNICAM-CTS-SF TKT-UNICAM
Optional accessories:
Item Item code CTS CTS-SF
CTS adapter for UniCam® SC connectors TER-CTS-SC 3 pcs 3 pce
CTS adapter for UniCam® ST®compatible connectors TER-CTS-ST 3 pcs 3 pcs
CTS adapter for UniCam® LC connectors TER-CTS-LC 3 pcs 3 pcs
Jumper ST® compatible to SC SM simplex, 1m, FRNC 586101R3Z31001M 1 pce 1 pce
Jumper ST® compatible to LC SM simplex, 1m, FRNC 026101R2Z31001M 1 pce 1 pce
Datasheet
Anaerobic ST® compatible, FC, SC, LC/ January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Field installable connectors
Product: ST® compatible, FC, SC and LC anaerobic-cure connectors
Fibre: InfiniCor® SX+ OM3, InfiniCor® 600 OM2, InfiniCor® 300 OM1, SMF-28e™ OS2
Applications
The Corning Cable Systems’ anaerobic-cure all ceramic
ST® compatible, FC, SC and LC connectors are ideal
for all applications requiring field installed connectors,
like fibre-to-the-desk, fibre-to-the-machine and
enterprise networks installations.
Description
The Corning Cable Systems’ anaerobic-cure multimode
and single-mode connectors combine the quick-cure
convenience of anaerobic adhesive with the
performances of epoxy and polish connectors.
The anaerobic adhesive uses a two-part epoxy-resin
curing process. The adhesive is first injected into the
connector’s ferrule, the fibre is dipped into the primer
and inserted into the ferrule, curing takes one minute
without the use of UV lamps or ovens.
Anaerobic connectors can be completely assembled
and polished in less than three minutes.
Features /Benefits
- Fast cure anaerobic adhesive: does not require electrical power supply.
- Minimal tools required.
- Hand polish: does not require polishing machine.
- Reduced installation time: < 3 minutes (assembled and polished)
- Typical insertion loss: 0.2 dB with physical contact polish.
- ST® compatible, FC, SC connectors delivered in single connector’s bags including connector body with
preassembled ferrule, boots for 900 µm fibres and 2-mm, 3-mm jacketed cables, crimp rings for 2-mm, 3-mm
jacketed cables.
- LC connectors delivered in single connector’s bags including connector body with preassembled ferrule, boots
for 900 µm fibres and 2-mm, 3-mm jacketed cables, crimp rings for 1.6 – 2-mm, 3-mm jacketed cables.
- Available in 3 versions:
MM OM3/OM2: pack includes 2 sets of boots (Aqua OM3, Black OM2 to EIA/TIA-568-C.3 Draft 2006)
MM OM1: pack includes 1 set of boots (Beige to EIA/TIA-568-C.3 Draft 2006)
SM: pack includes 1 set of boots (Blue to EIA/TIA-568-C.3 Draft 2006 for LC connectors)*
- ST® compatible to TIA/EIA 604-2, FC to TIA/EIA 604-4, SC to TIA/EIA 604-3 and LC to TIA/EIA 604-10
* Boots for ST® compatible, FC and SC single-mode connectors are white.
Characteristics
Connector type ST® comp./PC FC/PC SC/PC LC/PC
Ferrule Ceramic Ceramic Ceramic Ceramic
Connector body Metal Metal Composite Composite
Insertion loss, typical PC (dB) 0.2
Reflectance Multi Mode (dB) ≤ -26
Reflectance SingleMode (dB) ≤ -40
Temperature cycling to FOTP-3 ∆IL ≤ 0.3 dB, -40 – +75 °C, 21 cycles
ST
®
compatible anaerobic-cure connector
MM 50/125µm OM2
Datasheet
Anaerobic ST® compatible, FC, SC, LC/ January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Ordering information: Multimode connectors
ST® compatible
Ordering number Description Fibre type
95-051-52-SP ST® compatible MM Anaerobic, metal housing, black + aqua boots OM3/OM2
95-101-52-SP ST® compatible MM Anaerobic, metal housing, beige boots OM1
FC
Ordering number Description Fibre type
95-051-61-SP FC MM Anaerobic, metal housing, black + aqua boots OM3/OM2
95-101-61-SP FC MM Anaerobic, metal housing, beige boots OM1
SC
Ordering number Description Fibre type
95-051-41-SP SC MM Anaerobic, black housing, black + aqua boots OM3/OM2
95-101-41-SP SC MM Anaerobic, beige housing, beige boots OM1
LC
Ordering number Description Fibre type
95-051-98-SP LC MM Anaerobic, black housing, black + aqua boots OM3/OM2
95-101-98-SP LC MM Anaerobic, beige housing, beige boots OM1
Ordering information: Single-mode connectors
ST® compatible
Ordering number Description Fibre type
95-201-52-SP ST® compatible SM Anaerobic, metal housing, white boots OS2
FC
Ordering number Description Fibre type
95-201-61-SP FC SM Anaerobic, metal housing, blue boots OS2
SC
Ordering number Description Fibre type
95-201-41-SP SC SM Anaerobic, blue housing, blue boots OS2
LC
Ordering number Description Fibre type
95-201-98-SP LC SM Anaerobic, blue housing, blue boots OS2
Data sheet
Anaerobic connector tool kits/ February 2009
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® field installable connectors tool-kits
Product: Anaerobic-cure connectors tool-kits
Fibre: All Fibre Types
Applications
The Corning Cable Systems’ Anaerobic tool-kits are
intended for the installation of all Corning Cable
Systems’ Anaerobic and Anaerobic GIC connectors.
Tool kits with different equipment are available also for
installation of a special group of connectors.
Description
Corning Cable Systems’ tool kits for field installable
connectors provide with a collection of essential tools
required for tasks associated with the termination of
fibre optic cable. The tools are thoughtfully assembled
and are stored in compact and easy to carry cases that
are lined with a foam-padding material in order to
protect the high-quality tools.
The standard tool kit (TKT-ANAEROBIC2-EMEA)
allows installation and polishing of multimode and
single-mode all-ceramic anaerobic connectors as well
as of the anaerobic GIC connectors. All CCS’ anaerobic
connector types can be installed with this kit: ST® compatible, FC, SC and LC. The kit contains consumables
for up to 500 connectors.
The TKT-ANAEROBIC2-25-EMEA is an economical alternative for installation of the only connectors with 2.5
mm diameter ferrules (ST® compatible, FC and SC). The kit contains consumables for up to 500 connectors.
The LC supplement kit TKT-ANAEROBIC2-S integrates the TKT-ANAEROBIC2-25-EMEA kit with the
additional tools necessary for LC termination.
The combined features of TKT-ANAEROBIC2-25-EMEA and TKT-ANAEROBIC2-S are equivalent to those of
TKT-ANAEROBIC2-EMEA.
A consumables set (TKT-ANAEROBIC2-C-EMEA) is available for replacing consumable materials like
polishing films and two components adhesive. The kit contains consumables for up to 500 connectors.
Features/Benefits
− Compact and practical carrying bag
− Full in-depth instruction included
− All components necessary to install Anaerobic and Anaerobic GIC connectors are included.
− Each of the tool kit includes consumables for the installation of up to 500 connectors
− A consumables set including consumables for the installation of up to 500 connectors is available.
TKT-ANAEROBIC2-EMEA tool kit
(Adhesive bottles may differ from photo)
Data sheet
Anaerobic connector tool kits/ February 2009
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Tool kits contents
Item Item code TKT-
ANAEROBIC2-
EMEA
TKT-
ANAEROBIC2-C-
EMEA
TKT-
ANAEROBIC2-
25-EMEA
TKT-
ANAEROBIC2-S
Loctite#648 anaerobic
adhesive, 50ml 1pc 1pc 1pc -
Loctite #7649 Primer
anaerobic, spray, 150ml 1pc 1pc 1pc -
Syringe 3cc 100335-01 2 pcs - 2 pcs -
Syringe tip 1.5mm 2104090-01 20 pcs - 20 pcs -
Polishing film clear, 0.2µm,
5” 1506069-01 1 Pack / 50 pcs 1 Pack / 50 pcs 1 Pack / 50 pcs -
Polishing film grey, 3µm, 6” 2104004-02 1 Pack / 50 pcs 1 Pack / 50 pcs 1 Pack / 50 pcs -
Polishing film yellow, 12µm,
5” 2104071-01 1 Pack / 15 pcs 1 Pack / 15 pcs 1 Pack / 15 pcs -
Polishing film white, 0.3µm,
5” 2104072-01 1 Pack / 50 pcs 1 Pack / 50 pcs 1 Pack / 50 pcs -
Puck polish. SC/ST/FC conn. 2104020-01 2 pcs - 2 pcs -
Puck-LC hand, spring loaded 2104459-01 1 pce - 1 pce
Plate-polish. 6x6” (GIC conn.) 2104306-01 2 pcs - 2 pcs -
Pad rubber (all-cer. Conn.) 2104454-01 3 pcs - 3 pcs -
Crimp tool SC/ST/FC single
step 3201031-01 1 pce - 1 pce -
Crimp tool LC 3201032-01 1 pce - - 1 pce
Scribe, ruby (reversible
blade) 3233004-01 1 pce - 1 pce -
Stripper 6” wire Jensen tool 3206001-01 1 pce - 1 pce -
Stripper, No-nicks, 203µm 3205007-01 1 pce - 1 pce -
Fibre stripper, plier type 3205004-01 1 pce - 1 pce -
Gauge LC strip length 3201032-01 1 pce 1 pce 1 pce
Gauge GIC RPP ST/SC strip
length 2104264-02 1 pce 1 pce 1 pce -
Razor blade single edge 3224001-01* 3 pcs - 3 pcs -
Compressed air 2101005-01 1pce - 1pce -
Scissors 5” electrician 100294-01 1 pce - 1 pce -
Tweezers 100312-01 1 pce - 1 pce -
Wipes alcohol 1508001-01 12 pcs - 12 pcs -
Lint free wipes 3615001-01 - 1 pack - -
Marker black 2104007-01* 1 pce 1 pce 1 pce -
200x microscope 2.5
univ.adp LSCOPE-9 1 pce - 1 pce -
1.25 univ.adp for microscope 2104375-01 1pce - - 1 pce
Battery 1.5V for microscope 1716016-01 3 pcs 3 pcs 3 pcs -
Bottle 2.0 oz. with cap 1603004-03 2 pcs - 2 pcs -
Box, plastic clear 1605059-01 1 pce - 1 pce -
Spiral wrap 1/8” o.d. 1819001-02 2 pcs - - 2 pcs
Anaerobic procedure ISS 2 SRP-006-160 1 pce 1 pce 1 pce 1 pce
Note: All materials in the list of contents, except those marked with *, can be ordered separately
Data sheet
Anaerobic connector tool kits/ February 2009
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Ordering information:
Type Description Anaerobic tool kit for (ST/FC/SC/LC)
GIC and all-ceramic connectors Consumables for anaerobic tool kits
Quantity/deliver unit 1/1 1/1
Ordering number TKT-ANAEROBIC2-EMEA TKT-ANAEROBIC2-C-EMEA
Type Description Anaerobic tool kit for (ST/FC/SC) GIC
and all-ceramic conn. 2.5mm ferrule Integration for TKT-ANAEROBIC2-25
for LC terminations
Quantity/deliver unit 1/1 1/1
Ordering number TKT-ANAEROBIC2-25-EMEA TKT-ANAEROBIC2-S
Data sheet
Buffer tube indoor and outdoor single fibre fan-out kits FAN-xxxx-xx / March 2007
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Fan-out kits
Product: Buffer tube indoor and outdoor single fibres fan-out-kits
Fibre: Multimode and Single-Mode Fibres
Applications
The Corning Cable Systems’ buffer-tube fan-out kits
are intended for the furcation of buffer tubes onto
900µm legs as required to field-install connectors on
bare fibres.
Different kits are available for applications on stranded
loose tube cables at indoor or outdoor cross-connection
points. In combination with the transition kits the indoor
buffer tubes fan-out kits can be also installed on single
maxi-tube cables.
Description
Corning Cable Systems’ indoor and outdoor buffer tube
fan-out kits are specifically designed for the termination
of 6- and 12-fibres buffer tubes. These kits provide the
ultimate solution for the field termination of loose tube
cables by means of a compact easy to install assembly
not requiring additional hardware or space than that
required for terminating tight buffered cables.
Indoor and outdoor kits feature a 900µm fan-out
assembly that is colour coded to match the fibres
colour scheme (to Telcordia). The fan-out assembly is
available with 6- or 12-fibres units in lengths of 600 mm
(25-in.) or 1200 mm (47-in). These different lengths
provide the flexibility needed for installation in a variety
of hardware options.
Features / Benefits
− Eliminates strain on fibres by isolating them from
tensile forces
− Colour coded fan-out tubing to Telcordia:
6 fibres: blue, orange, green, brown, grey, white
12 fibres: blue, orange, green, brown, grey, white,
red, black, yellow, violet, pink, aqua
− Snap-together furcation unit eliminates epoxy resin
for indoor kits.
− Compact design.
− Quick and easy to install.
− Optimized for field termination of loose tube
cables.
− Excellent fibre routing capabilities.
− Bend radius protection designed into each unit.
− Indoor temperature range: 0 °C – +70 °C.
− Outdoor temperature range: -40 °C – +70 °C
− Single maxi-tube cables fan-out extension kits
suitable for single maxi-tube cables containing
individual fibres or up to 5 bundles with up to 12
fibres each.
Buffer tube fan-out kit
Buffer tube fan
-
out kit: furcation unit
Buffer tube fan-out kit for single maxi-
tube cables
Data sheet
Buffer tube indoor and outdoor single fibre fan-out kits FAN-xxxx-xx / March 2007
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Ordering information:
Indoor buffer tube fan-out kits
1 2
FAN – BT –
Outdoor buffer tube fan-out kits
1 2
FAN – OD –
Use the following options to construct the part number:
1 Select length of furcation length (900µm tubing)
25 = 600 mm (25-in.)
47 = 1200 mm (47-in.)
2 Select number of fibres
06 = 6 fibres
12 = 12 fibres
Examples:
FAN – BT47 – 06
Type designation: Indoor fan-out kit for 6 fibres, length of 900µm tubing = 1200 mm (47-in.).
FAN –OD25 – 12
Type designation: Closet fan-out kit for 12 fibres, length of 900µm tubing = 600 mm (25-in.).
Optional accessories:
Part Number Description
TKT-FANBT-A Buffer tube fan-out assembly tool kit. Includes: buffer tube fan-out assembly fixture, case
for buffer tube fan-out assembly fixture.
TKT-FANBT-C Consumables for buffer tube fan-out assembly tool kit. Includes: buffer tube fan-out
clamp, Loctite 411 adhesive (3g), alcohol wipes (20 pcs), Kimwipes (1 pack).
EST-END-01-SM Single maxi-tube fan-out kit for single-mode applications: includes funnel, yellow branch
tubing, transition heat-shrink sleeves and installation instructions.
EST-END-01-MM Single maxi-tube fan-out kit for single-mode applications: includes funnel, orange branch
tubing, transition heat-shrink sleeves and installation instructions.
Datasheet
Ribbon fan-out kit RIB-FAN-12-xx / January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Fan-out kits
Product: Single ribbon fan-out-kit
Fibre: InfiniCor® SX+ OM3, InfiniCor® 600 OM2, InfiniCor® 300 OM1, SMF-28e™ OS2
Applications
The Corning Cable Systems’ ribbon fan-out kit is
intended for the furcation of a single ribbone (bare, in a
rectangular fan-out tubing or in a ribbon interconnect
cable) onto 900µm single fibre legs as required to field-
install single fibre connectors.
Description
The Corning Cable Systems’ ribbon fan-out kit is
specifically designed for the indoor termination of 12-
fibres ribbons bare as well as jacketed (fan-out tubing
or ribbon interconnect cable). This kit provide the
ultimate solution for the field termination onto single
fibre connectors by means of a compact, easy to install
assembly not requiring additional hardware or space
than that required for terminating tight buffered cables.
The ribbon fan-out kit features a 900µm fan-out
assembly that is colour coded to match the fibres colour
scheme of the ribbon. The fan-out assembly is available
with 12-fibres units in lengths of 600 mm (25-in.) or 900
mm (36-in). These different lengths provide the
flexibility needed for installation in a variety of hardware
options.
Features / Benefits
− Eliminates strain on fibres by isolating them from
tensile forces
− Colour coded fan-out tubing for indoor use
− Snap-together furcation unit eliminates epoxy resin.
− Compact design.
− Quick and easy to install.
− Optimized for field termination of cables.
− Excellent fibre routing capabilities.
− Bend radius protection designed into each unit.
Ordering information:
Ordering number Description Tubing length
mm (in.)
RIB-FAN-12 Ribbon fan-out kit 12x900µm tubing 600mm (25-in.) length 600 (25)
RIB-FAN-12-36 Ribbon fan-out kit 12x900µm tubing 900mm (36-in.)length 900 (36)
Note: 900 mm (36-in.) length is only recommended if installing into connector modules;
600 mm (25-in.) length is recommended for connector panels and other Corning Cable Systems
hardware.
Single ribbon fan-out kit
Ribbon fan-out kit: components
Datasheet
Spider fan-out kits SFK-x-xx-xxx-x / January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® Fan-out kits
Product: Spider fan-out-kits
Fibre: InfiniCor® SX+ OM3, InfiniCor® 600 OM2, InfiniCor® 300 OM1, SMF-28e™ OS2
Applications
The Corning Cable Systems’ spider fan-out kits are
intended for the furcation of loose tube or tight buffered
cables buffer tubes onto ruggedized legs to realize
multifibres cable assemblies to be used for direct
connections without use of patch panels.
Different kits are available for application on loose tube,
tight buffered or ribbon cables.
Description
Corning Cable Systems’ spider fan-out kits are a low
cost termination option for multifibre cables. These kits
are designed for both factory and field termination of
tight-buffered, loose tube (with 4 to 24 fibres) and single
tube ribbon (24 to 96 fibres) non-armoured cables.
These kits provide a modular, easy installable solution
based on a simple step-by-step assembly that grants a
successful installation. Installation of spider fan-out kits
eliminates the need for patch panels at low-cost
termination points.
The spider fan-out kits terminate and provide pull-out
protection for single fibres (tight buffered 900µm or bare
fibres 250µm) or bare 12-fibres ribbons; the single
fibres or the ribbons are threaded into the modular
inserts which consist of a composite assembly
securing, for single fibres, six 1-meter lengths of fan-out
tubing, and for 12-fibre ribbons two 1-meter lengths of
rectangular fan out tubing. The fan-out tubing (for single
fibre as well as for ribbon) provide three layers of
protection consisting of a Teflon inner tube (into which
the fibre or the ribbon is inserted) an aramid yarn
strenght member and an outer protective PVC Jacket.
The fan-out insert snaps into the main spider body
which is then enclosed within the outer housing.
Features / Benefits
− Modular, compact design.
− No special tool or heat-shrink sleeve
− Field or factory termination
− Fan-out tubing length of one meter provides flexible
installation
− Cost effective for splicing and terminating hardware
− Non-metallic/high strength, rugged, composite
material.
Spider fan-out MM OM1/OM2 on
tight buffered cable
Spider fan-out kit SM on loose tube
cable
Ribbon spider fan-out kit MM OM3
Datasheet
Spider fan-out kits SFK-x-xx-xxx-x / January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Specifications :
Loose tube/Single tube cable
(bare fibre / 250µm) Mic / A-VQ(BN)H
(tight buffered fibre / 900µm) Single tube ribbon cable
(12-fibres ribbon)
Fibre
count Length
mm (in.) Diameter
mm (in.) Length
mm (in.) Diameter
mm (in.) Length
mm (in.) Diameter
mm (in.)
6 to 12 146 (5.75) 28 (1.1) 121 (4.75) 19 (0.75) – –
13 to 24 146 (5.75) 28 (1.1) 146 (5.75) 28 (1.1) – –
24 to 96 – – – – 146 (5.75) 28 (1.1)
Acceptable cable outer diameter:
Loose tube/Single tube cable
(bare fibre / 250µm) Mic / A-VQ(BN)H
(tight buffered fibre / 900µm) Single tube ribbon cable
(12-fibres ribbon)
Fibre
count Min. O.D.
mm (in.) Max. O.D.
mm (in.) Min. O.D.
mm (in.) Max. O.D.
mm (in.) Min. O.D.
mm (in.) Max. O.D.
mm (in.)
6 to 12 8.6 (0.34) 15.7 (0.62) 4.6 (0.18) 7.1 (0.28) – –
13 to 24 8.6 (0.34) 15.7 (0.62) 6.6 (0.26) 10.9 (0.43) – –
24 to 96 – – – – 8.6 (0.34) 15.7 (0.62)
Ordering information:
H indicates the RoHS compliance
1 2 3 4
SFK – – – – H
Use the following options to construct the part number:
1 Select length of furcation length (900µm
tubing)
P = 3mm (single fibre) or rectangular (ribbon) fan-
out tubing
P2 = 2mm (single fibre) fan-out tubing
2 Select number of fibres
06 = up to 6 single fibres
12 = up to 12 single fibres
18 = up to 18 single fibres
24 = up to 24 single fibres or 2 ribbons (24 fibres)
48 = up to 4 ribbons (48 fibres)
72 = up to 6 ribbons (72 fibres)
96 = up to 8 ribbons (96 fibres)
3 Select fibre type
900 = accepts 900µm tight buffered fibres
250 = accepts 250µm bare fibres
RIB = accepts 12 fibres ribbon
4 Select fan-out tubing colour
M = Orange (62.5µm or standard 50µm
multimode)
S = Yellow (single-mode)
A = Aqua (laser optimized 50µm multimode)
Examples:
SFK – P – 06 – 900 – SH
Type designation: Spider fan-out kit for 6x 900µm single-mode fibres, 6 fan-out tubings 3mm diameter, yellow.
SFK – P2 – 24 – 250 – AH
Type designation: Spider fan-out kit for 24x250µm multimode 50µm laser optimized fibres (OM3), 24 fan-out
tubings 2mm in diameter, aqua.
SFK – P – 24 – RIB –MH
Type designation: Spider fan-out kit for 2xribbon (24 fibres) multimode 50µm or 62.5µm fibres (OM3), 2
rectangular fan-out tubings, orange.
Datasheet
Spider fan-out kits SFK-x-xx-xxx-x / January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Optional accessories:
Part Number Description
2104148-01 6 fibres insert plug for bare fibres (250µm) orange (62.5µm or standard 50µm multimode).
2104149-01 6 fibres insert plug for tight buffered fibres (900µm) orange (62.5µm or standard 50µm
multimode).
2104150-01 6 fibres insert plug for bare fibres (250µm) yellow (single-mode).
2104151-01 6 fibres insert plug for tight buffered fibres (900µm) yellow (single-mode).
SFK-P-IH-RIB-A 2 horizontal ribbons insert plug aqua (multimode 50µm laser optimized fibres)
SFK-P-IV -RIB-A 2 vertical ribbons insert plug aqua (multimode 50µm laser optimized fibres)
SFK-P-IH-RIB-M 2 ribbons horizontal insert plug orange (62.5µm or standard 50µm multimode).
SFK-P-IV-RIB-M 2 ribbons horizontal insert plug orange (62.5µm or standard 50µm multimode).
SFK-P-IH-RIB-S 2 ribbons horizontal insert plug yellow (single mode).
SFK-P-IV-RIB-S 2 ribbons horizontal insert plug yellow (single mode).
2104189-01 Blank plug
Datasheet
CamSplice™ 95-000-04-xxx / January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Product Family: LANscape® CamSplice™ no-adhesive mechanical splice
Product: CamSplice™ no-adhesive mechanical splice
Fibre: InfiniCor® SX+ OM3, InfiniCor® 600 OM2, InfiniCor® 300 OM1, SMF-28e™ OS2
Applications
Corning Cable Systems’ CamSplice™ no-adhesive
mechanical splices are especially indicated for
emergency restoration and lab splicing for temporary
system testing. They offer also a simple solution for
those cases where the use of a fusion splice machine is
not practicable.
Description
Corning Cable Systems’ CamSplice™ is a simple, craft-
friendly mechanical splice for both multimode and
single-mode fibres. It features a “cam” locking
mechanism, which requires no adhesive. The
CamSplice™ mechanical splice incorporate a unique,
patented fibre alignment method that self-centres the
fibres and provides extremely accurate alignment.
Average “blind” (non-tuned) splice loss for the
CamSplice™ mechanical splice is specified at 0.3 dB
with a minimum loss less than 0.15 dB. There is only
one part for 250 µm to 250 µm, 250 µm to 900 µm or
900 µm to 900 µm applications (one size fits all).
The CamSplice™ mechanical splice requires minimal
training and few accessories to assemble. The
assembly process involves stripping and cleaving
fibres, inserting the fibres into the splice part until they
touch and turning the cams to secure the fibre. The
process does not involve any adhesives or special
tools, although an optional assembly fixture is
recommended. A typical installation takes less than two
minutes. A compact, self-contained tool kit is available
with standard tools including the optional the assembly
fixture.
Completed splices fit in Corning Cable Systems and
many other industry standard splice trays.
Features / Benefits
− No adhesive or epoxy required
− Universal: one part fits all fibre coatings
− Re-mateable, tunable.
− Self centring alignment mechanism.
− Antitorsion option with lead-in tubes for securing
900µm tight buffered fibres.
− Pre-inserted index-matching gel.
− No stress in fibre alignment area.
− Small assembly fixture recommended, but optional.
− Fits in most industry standard splice trays.
CamSplice™ and antitorsion
CamSplice™
CamSplice™ assembly tool
Datasheet
CamSplice™ 95-000-04-xxx / January 2007
Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.
Characteristics
Dimensions LxW: mm (in.) 44.0 x 4.2 (1.73 x 0.17)
Typical splice loss: dB 0.15
Typical “blind” splice loss: dB 0.3
Reflectance (flat cleave): dB ≤ -45 dB
Reflectance (angled cleave): dB ≤ -60 dB
Tensile strength: N 2.25
Temperature range: -40 – +75 °C, ∆IL ≤ 0.1 dB average
Vibration 10 – 55 Hz, amplitude max. 1.52 m, 3 axis, 2 h each, ∆IL ≤ 0.5 dB
Ordering information:
Ordering number Description Quantity/ delivery
unit
95-000-04 CamSplice™ mechanical splice 6 / 1
95-000-04-ATC* Antitorsion CamSplice™ mechanical splice for 900µm applications 900 (36)
* Once crimped the antitorsion CamSplice™ is not re-mateable
Optional accessories:
Part Number Description
TKT-100-01 CamSplice™ tool kit, includes CamSplice™ assembly fixture, fibre coating stripping tool.
TKT-100-02 CamSplice™ tool kit with cleaver, includes CamSplice™ assembly fixture, fibre coating
stripping tool and Score & Snap Cleaver.
2104040-01 CamSplice™ assembly fixture.
2104200-01 Crimp tool for antitorsion CamSplice™ mechanical splice
FBC-001 Score & Snap cleaver.
FBC-006 Precision fibre cleaver.
Tool kits contents
Item Item code TKT-100-01 TKT-100-02
CamSplice™ assembly tool 2104040-01 1 pce 1 pce
Fibre cleaver, score & snap FBC-001 - 1 pce
Stripper 6” wire Jensen tool 3206001-01 1 pce 1 pce
Stripper, No-nicks, 203µm 3205007-01 1 pce 1 pce
Fibre stripper, plier type 3205004-01 1 pce 1 pce
Scissors 5” electrician 100294-01 1 pce 1 pce
Marker black 2104007-01* 1 pce 1 pce
Tweezers 100312-01 1 pce 1 pce
Black tape, electrical,3/4”x20’ 2104047-01 1 pce 1 pce
Wipes alcohol 1508001-01 6 pcs 6 pcs
Bottle 60 ml dispensing 1604003-01* 1 pce 1 pce
Book of numbers 0 - 9 100297-01 1 pce 1 pce
Instructions CamSplice™ assembly SRP-006-038 1 pce 1 pce
Instructions FBC-001 cleaver SRP-001-040 - 1 pce
Instructions fibre stripping tool SRP-005-006 1 pce 1 pce
Instructions buffer stripping tool SRP-005-005 1 pce 1 pce
Instructions stripper No-nicks, 203µm SRP-004-036 1 pce 1 pce
Note: All items in the content lists, except those marked with *, can be ordered separately
