Product Detail Manual
2014-09-27
: Pdf 674191-Attachment 674191-Attachment 001227 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 111
| Download | |
| Open PDF In Browser | View PDF |
Armored Cable for Hazardous Locations JA NUA RY 2013 CCW® Servicing Industrial and Specialty Applications This catalog contains in-depth information on the most comprehensive line of CCW® instrumentation, power and control Continuously Corrugated Welded cable available today. It features the latest information on products, along with detailed technical and specification data in indexed sections — with an easy-to-use “spec-on-a-page” format. The “spec-on-a-page” format was developed to meet your needs. It features up-to-theminute product information, from applications and constructions to detailed technical and specification data. There’s also a comprehensive technical section for additional assistance. And, of course, if you need any further data, General Cable’s Customer Service staff provides the answers you need quickly and efficiently. All information in this catalog is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product specifications at the time of publication, the specifications of all products contained herein are subject to change without notice. GENERAL CABLE and CCW are registered trademarks of General Cable Technologies Corporation. C-L-X is a trademark of The Okonite Company. © 2013. General Cable Technologies Corporation. Highland Heights, KY 41076 All rights reserved. Printed in USA. What’s New? G LO BA L O IL A N D G AS SO LU T I O N S From exploration and extraction to production and processing of natural resources, General Cable's products satisfy virtually every cabling requirement around the globe. W I R E D F O R P O W E R G E N E R AT I O N Serving the Power Generation Market General Cable is a multi-billion-dollar leader in energy and industrial cables for power generation, transmission and distribution worldwide and the largest energy product supplier in North America. F U L L L I N E C ATA L O G Instrumentation, Power and Control Cables This catalog contains in-depth information on the most comprehensive line of instrumentation, power and control cable available today. It features the latest information on products, along with detailed technical and specification data in indexed sections — with an easy-to-use “spec-on a page” format. CCW® Continuously Corrugated Welded Cable Participation in the global oil, gas and petrochemical (OGP) market sector is an important part of General Cable’s long-term energy strategy. General Cable has positioned itself globally as an “energy company” and is making major investments in wire and cable products for the energy infrastructure markets. With oil and gas as a primary driver of energy, General Cable has listened to customers and analyzed its product offering based on market input. Consequently, it is rounding out its portfolio of products on a global scale, adding CCW (Continuously Corrugated Welded Cable), umbilical, and subsea cables to a suite of products used by the oil, gas and petrochemical industries for power, control, instrumentation, and communications. The reintroduction of the CCW product line expands the current OGP product offering, providing existing and new customers with a single source for their wire and cable needs, while at the same time allowing General Cable to participate more broadly in the downstream portion of the OGP market, which includes refineries, petrochemical plants, and LNG (liquid natural gas) facilities. CCW products are used in hazardous locations (in accordance with NEC® Articles 500-505) requiring cables that are impervious to gas, liquids and vapors and terminated with explosion-proof glands to electrical equipment. CCW is standardized by the refining industry as the only acceptable product construction (reference API RF14F and 14FZ) and is a staple in offshore production platforms, refineries, LNG facilities, and petrochemical processing mills. The CCW product line is ideal for use in the world’s prominent “oil patches” in the U.S.A., Indonesia, Mexico, the Caribbean, South America, and the Middle East. General Cable’s stocking profile includes a complete line of products from 300 volt instrumentation through 35 kV power cable and will provide a complete product offering to service the industrial and OGP markets. Date of Issue 1/13 Section 1 Industrial Cables Table of Contents CCW® Continuously Corrugated Welding Cable for Hazardous Locations SPECIFICATION NO. PRODUCT DESCRIPTION 9025 CCW® Thermocouple Extension, Single Pair, Overall Shield (OS) Armor UL Type ITC-HL/PLTC, PVC, 105°C, ABS CWCMC 9050 CCW® Thermocouple Extension, Pairs, Overall Shield (OS) Armor UL Type ITC-HL/PLTC, PVC, 105°C, ABS CWCMC 9075 CCW® Thermocouple Extension, Pairs, Individual and Overall Shield (IS-OS) Armor UL Type ITC-HL/PLTC, PVC, 105°C, ABS CWCMC 9125 CCW® 300 V Instrumentation, Pairs/Triads, Overall Shield (OS) Armor UL Type ITC-HL/PLTC, XLPE, 90°C, ABS CWCMC 9150 CCW® 300 V Instrumentation, Pairs/Triads, Individual and Overall Shield (IS-OS) Armor UL Type ITC-HL/PLTC, XLPE, 90°C, ABS CWCMC 9225 CCW® 300 V Instrumentation, Pairs/Triads, Overall Shield (OS) Armor UL Type ITC-HL/PLTC, PVC, 105°C, ABS CWCMC 9250 CCW® 300 V Instrumentation, Pairs/Triads, Individual and Overall Shield (IS-OS) Armor UL Type ITC-HL/PLTC, PVC, 105°C, ABS CWCMC 9325 CCW® 600 V Instrumentation, Pairs/Triads, Overall Shield (OS) Armor UL Type MC-HL, PVC/Nylon, 90°C, ABS CWCMC 9350 CCW® 600 V Instrumentation, Pairs/Triads, Individual and Overall Shield (IS-OS) Armor UL Type MC-HL, PVC/Nylon, 90°C, ABS CWCMC 9500 CCW® 600 V Control With Grounding Conductor Armor UL Type MC-HL, XLPE, 90°C, ABS CWCMC 9510 CCW® 600 V Control With Bare Grounding Conductor Armor UL Type MC-HL, XLPE, 90°C, ABS CWCMC 9525 CCW® 600 V Control Without Grounding Conductor Armor UL Type MC, XLPE, 90°C, ABS CWCMC 9600 CCW® 600 V Power, 3/C VFD and 4/C Armor UL Type MC-HL, XLPE, 90°C, ABS CWCMC 9615 CCW® 2000 V Power, 3/C VFD Armor UL Type MC-HL, XLPE, 90°C, ABS CWCMC 9625 CCW® 600 V Composite Power and Control Armor UL Type MC-HL, XLPE, 90°C, ABS CWCMC 9650 CCW® 600 V Composite Power and Control Without Ground Armor UL Type MC, XLPE, 90°C, ABS CWCMC 9675 CCW® 1000 V Power, 3/C VFD Armor CSA Type RA90, HL, XLPE, 90°C 9700 CCW® 2.4 kV Power, Nonshielded, 3/C VFD Armor UL Type MC-HL or MV-90, EPR, 90°C, ABS CWCMC 9800 CCW® 5 kV 133%/8 kV 100% Power, Shielded, 3/C VFD Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9815 CCW® 8 kV 133% Power, Shielded, 3/C VFD Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9825 CCW® 15 kV 100% Power, Shielded, 3/C Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9835 CCW® 15 kV 133% Power, Shielded, 3/C Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9845 CCW® 25 kV 100% Power, Shielded, 3/C Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9855 CCW® 25 kV 133%/35 kV 100% Power, Shielded, 3/C Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9875 CCW® 35 kV 133% Power, Shielded, 3/C Armor UL Type MC-HL or MV-105, EPR, 105°C, ABS CWCMC 9900 CCW® CCW® Armored Cable Tool Kit Armor Phone: 888-593-3355 www.generalcable.com REVISION DATE Apr. 2011 Apr. 2011 Apr. 2011 Apr. 2011 Apr. 2011 Apr. 2011 Apr. 2011 Feb. 2011 Feb. 2011 Feb. 2011 Feb. 2011 Feb. 2011 Feb. 2011 Feb. 2011 Jan. 2011 Feb. 2011 Mar. 2012 Feb. 2011 May 2012 May 2012 May 2012 May 2012 May 2012 Feb. 2011 Feb. 2011 Jan. 2010 Industrial Cables Date of Issue 1/13 Section 2 Table of Contents Technical Information SPECIFICATION NO. DESCRIPTION Technical Table of Contents A001 Metal-Clad CCW® Type MC-HL Wiring System A001 CCW® Installation Manual A001 CCW® Sheath Removal Instructions A010 CCW® Explosion-Proof Gland Cross-Reference A015 CCW® Part Number Cross-Reference — Okonite C-L-X® to General Cable CCW® A030 Reference Standards A055 Checklist for CCW® Specifications A100 Common Color Sequence A150 Metric Conversion Factors A185 AWG (American Wire Gauge) to mm2 (Millimeters Squared) Conversion B025 Class B Conductors for General Wiring D005 Recommended Reel Handling Practices D025 Recommended Cable Handling Practices D050 Recommended Cable Storage Practices E005 Pre-Installation Instructions E050 Installation — Feed-In Setups E075 Installation — Conductor Maximum Pulling Tensions E100 Installation — Training and Bending Limitations E125 Installation — Maximum Sidewall Pressure F005 DC “HI-POT” Pre-Test Guidelines for MV Cables F025 DC “HI-POT” Testing Guidelines for MV Cables F075 Field Electrical “HI-POT” Testing Guidelines F130 CCW® Sheath as a Grounding Conductor Index Part Number Index REVISION DATE Feb. 2011 Feb. 2011 Jul. 2011 Feb. 2011 Apr. 2010 Jan. 2013 Apr. 2010 Apr. 2010 Apr. 2011 Sept. 2010 Sept. 2010 Mar. 2012 Mar. 2012 Oct. 2011 Nov. 2011 Apr. 2010 Apr. 2010 Mar. 2012 Apr. 2010 Jan. 2011 Apr. 2010 Apr. 2010 Apr. 2010 Dec. 2010 Jan. 2013 Phone: 888-593-3355 www.generalcable.com Our Green Initiative symbol recognizes our role and responsibility in promoting sustainability. The symbol also reflects our commitment to achieving industry-leading standards and responding proactively to environmental global issues. Visit www.generalcable.com Select “COMPANY”, then select “Corporate Social Responsibility” Making Contact with the World Directing Traffic without Gridlock Building Bridges in the Sky General Cable is a leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable for the energy, industrial, specialty and communications markets. Our products inspire progress worldwide … customers use our value-added products to create global infrastructure that improves the standard of living for people everywhere. General Cable is influencing the world … with more than two-thirds of our sales generated outside North America, 14,000 associates worldwide and 57 manufacturing facilities throughout 26 countries. As one of the largest wire and cable manufacturers, we are the One Company Connecting the World. Energy Cables Our cables carry energy across the world — through the air, underground and under the sea. Increasing demand for energy is accelerating investment in exploration, extraction, power generation, transmission and distribution — whether based on coal, natural gas, oil, nuclear, wind, solar or water. Industrial & Specialty Cables Our cables channel the power and signals that make equipment hum and engines run. From oil rigs and broadcast studios to cars and trains, and in commercial buildings, public venues, factory floors and special applications such as military, nuclear, marine and mining — we serve an extensive range of markets. Communications Cables Each day we’re building business momentum — developing ideas into innovative solutions and industry-leading products, expanding geographic access and furthering our investment in highly capable associates, Lean Manufacturing, material science and technology resources. Our cables keep information flowing — facilitating a non-stop stream of words and images around the world. We meet the high-speed bandwidth needs of global communications networks, from fiber optic submarine communications cables, copper and fiber aerial and underground cables to copper and fiber optic enterprise cables and system solutions. World Headquarters General Cable 4 Tesseneer Drive Highland Heights, KY 41076-9753 U.S.A. SPEC 9025 April, 2011 CCW Armored Thermocouple, Single Pair, Overall Shield ® UL Type ITC-HL/PLTC, PVC, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • 16 AWG solid alloy wire per ANSI MC 96.1 Insulation: • Flame-retardant Polyvinyl Chloride (PVC), rated 105°C per UL Standards 13 and 2250 • Color-coded per ANSI Pair Assembly: • Insulated conductors are cabled together with a left-hand lay Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Phone: 888-593-3355 www.generalcable.com Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 • ANSI color-coded • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Thermocouple Extension cables provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9025 April, 2011 CCW Armored Thermocouple, Single Pair, Overall Shield ® UL Type ITC-HL/PLTC, PVC, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC WIRE TYPE/ SIZE NO. OF (AWG) PAIRS PART NUMBER INSULATION THICKNESS mils mm INNER JACKET NOMINAL THICKNESS CORE O.D. mils mm INCHES mm NOMINAL ARMOR O.D. INCHES mm JACKET THICKNESS mils mm CROSSNOMINAL SECTIONAL APPROXIMATE NET OVERALL O.D. AREA¹ WEIGHT INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m 9025.16010001 EX / 16 1 15 0.38 35 0.89 0.25 6.4 0.45 11.4 50 1.27 0.56 14.2 0.25 132 196 9025.16010002 JX / 16 1 15 0.38 35 0.89 0.25 6.4 0.45 11.4 50 1.27 0.56 14.2 0.25 132 196 9025.16010003 KX / 16 1 15 0.38 35 0.89 0.25 6.4 0.45 11.4 50 1.27 0.56 14.2 0.25 132 196 9025.16010004 TX / 16 1 15 0.38 35 0.89 0.25 6.4 0.45 11.4 50 1.27 0.56 14.2 0.25 132 196 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC® Section 392.22. COND. TYPE EX ANSI MC 96.1 CONDUCTOR ALLOY AND COLOR CODE POSITIVE WIRE NEGATIVE WIRE ALLOY COLOR ALLOY COLOR Chromel Purple Constantan Red JX Iron White KX Chromel TX Copper OUTER JACKET Purple NOM. LOOP RESISTANCE PER TEMP RANGE LIMITS OF ERROR 100 FT @ 20°C 0°C To +200°C +/- 1.7°C 27.8 Ohms 0°C To +200°C +/- 2.2°C 13.9 Ohms 0°C To +200°C +/- 2.2°C 23.6 Ohms -60°C To +100°C +/- 1.0°C 12.0 Ohms Constantan Red Black Yellow Alumel Red Yellow Blue Constantan Red Blue Phone: 888-593-3355 www.generalcable.com SPEC 9050 April, 2011 CCW Armored Thermocouple, Pairs, Overall Shield ® UL Type ITC-HL/PLTC, PVC, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • 20 AWG solid alloy wire per ANSI MC 96.1 Insulation: • Flame-retardant Polyvinyl Chloride (PVC), rated 105°C per UL Standards 13 and 2250 • Color-coded per ANSI with one conductor in each pair printed alphanumerically for easy identification Cable Assembly: • Individual pairs and communication wire are cabled together with a lefthand lay • Communication wire: 22 AWG solid bare copper, flame-retardant Polyvinyl Chloride (PVC), rated 105°C, orange Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 • ANSI color-coded • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requierments of NEC Article 250 Phone: 888-593-3355 www.generalcable.com Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 • ANSI color-coded • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Thermocouple Extension cables provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9050 April, 2011 CCW Armored Thermocouple, Pairs, Overall Shield ® UL Type ITC-HL/PLTC, PVC, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER 9050.20041221 9050.20081221 9050.20101221 9050.20121221 9050.20161221 9050.20201221 9050.20241221 9050.20361221 9050.20501221 9050.20041222 9050.20081222 9050.20101222 9050.20121222 9050.20161222 9050.20201222 9050.20241222 9050.20361222 9050.20501222 9050.20041223 9050.20081223 9050.20101223 9050.20121223 9050.20161223 9050.20201223 9050.20241223 9050.20361223 9050.20501223 9050.20041224 9050.20081224 9050.20101224 9050.20121224 9050.20161224 9050.20201224 9050.20241224 9050.20361224 9050.20501224 CROSSCOMMUNICATION WIRE WIRE INSULATION INNER JACKET NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE TYPE/ NO. THICKNESS SIZE INS. THICKNESS THICKNESS CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ NET WEIGHT SIZE OF mm mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m (AWG) PAIRS mils mm AWG mils 20 AWG TYPE EX MULTIPLE PAIRS OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE EX / 20 4 15 0.38 22 12 0.30 40 1.02 0.36 9.1 0.58 14.7 50 1.27 0.69 17.5 0.38 195 290 EX / 20 8 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 277 413 EX / 20 10 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 337 501 EX / 20 12 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 354 527 EX / 20 16 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 422 628 EX / 20 20 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 485 721 EX / 20 24 15 0.38 22 12 0.30 60 1.52 0.77 19.6 1.02 25.9 50 1.27 1.13 28.7 1.02 552 821 EX / 20 36 15 0.38 22 12 0.30 70 1.78 0.94 23.9 1.19 30.2 50 1.27 1.30 33.0 1.34 738 1,099 EX / 20 50 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 925 1,377 20 AWG TYPE JX MULTIPLE PAIRS OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE JX / 20 4 15 0.38 22 12 0.30 40 1.02 0.36 9.1 0.58 14.7 50 1.27 0.69 17.5 0.38 194 288 JX / 20 8 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 276 411 JX / 20 10 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 335 498 JX / 20 12 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 352 524 JX / 20 16 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 419 624 JX / 20 20 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 480 715 JX / 20 24 15 0.38 22 12 0.30 60 1.52 0.77 19.6 1.02 25.9 50 1.27 1.13 28.7 1.02 547 814 JX / 20 36 15 0.38 22 12 0.30 70 1.78 0.94 23.9 1.19 30.2 50 1.27 1.30 33.0 1.34 731 1,088 JX / 20 50 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 914 1,360 20 AWG TYPE KX MULTIPLE PAIRS OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE KX / 20 4 15 0.38 22 12 0.30 40 1.02 0.36 9.1 0.58 14.7 50 1.27 0.69 17.5 0.38 195 290 KX / 20 8 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 277 413 KX / 20 10 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 337 501 KX / 20 12 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 354 527 KX / 20 16 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 422 628 KX / 20 20 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 485 721 KX / 20 24 15 0.38 22 12 0.30 60 1.52 0.77 19.6 1.02 25.9 50 1.27 1.13 28.7 1.02 552 821 KX / 20 36 15 0.38 22 12 0.30 70 1.78 0.94 23.9 1.19 30.2 50 1.27 1.30 33.0 1.34 738 1,099 KX / 20 50 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 925 1,377 20 AWG TYPE TX MULTIPLE PAIRS OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE TX / 20 4 15 0.38 22 12 0.30 40 1.02 0.36 9.1 0.58 14.7 50 1.27 0.69 17.5 0.38 196 291 TX / 20 8 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 279 416 TX / 20 10 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 339 504 TX / 20 12 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 354 527 TX / 20 16 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 426 634 TX / 20 20 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 489 727 TX / 20 24 15 0.38 22 12 0.30 60 1.52 0.77 19.6 1.02 25.9 50 1.27 1.13 28.7 1.02 557 829 TX / 20 36 15 0.38 22 12 0.30 70 1.78 0.94 23.9 1.19 30.2 50 1.27 1.30 33.0 1.34 747 1,111 TX / 20 50 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 935 1,392 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC ® Section 392.22. COND. TYPE EX ANSI MC 96.1 CONDUCTOR ALLOY AND COLOR CODE POSITIVE WIRE NEGATIVE WIRE ALLOY COLOR ALLOY COLOR Chromel Purple Constantan Red JX Iron White KX Chromel TX Copper OVERALL JACKET COLOR Purple Constantan Red Black Yellow Alumel Red Yellow Blue Constantan Red Blue TEMP RANGE 0°C To +200°C LIMITS OF ERROR +/- 1.7°C NOM. LOOP RESISTANCE PER 100 FT @ 20°C 70.7 Ohms 0°C To +200°C +/- 2.2°C 35.7 Ohms 0°C To +200°C +/- 2.2°C 59.0 Ohms -60°C To +100°C +/- 1.0°C 29.8 Ohms Phone: 888-593-3355 www.generalcable.com SPEC 9075 April, 2011 CCW Armored Thermocouple, Pairs, Individual and Overall Shield ® UL Type ITC-HL/PLTC, PVC, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • 20 AWG solid alloy wire per ANSI MC 96.1 Insulation: • Flame-retardant Polyvinyl Chloride (PVC), rated 105°C per UL Standards 13 and 2250 • ANSI color-coded insulation, with one conductor in each pair printed alpha numerically for easy identification Shielded Pairs: • Isolated and individually twisted pairs with a Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, two sizes smaller than insulated conductors Cable Assembly: • Individually shielded pairs and communication wire are cabled together with a left-hand lay • Communication wire: 22 AWG solid bare copper, flame-retardant Polyvinyl Chloride (PVC), rated 105°C, orange Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 • ANSI color-coded inner jacket • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal Phone: 888-593-3355 www.generalcable.com CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 • ANSI color-coded overall jacket • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Thermocouple Extension cables with individually shielded pairs and an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods where shielding against both external EMI and EMI between pairs is required • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 Applications: (cont’d) • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9075 April, 2011 CCW Armored Thermocouple, Pairs, Individual and Overall Shield ® UL Type ITC-HL/PLTC, PVC, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC CROSSCOMMUNICATION WIRE WIRE INSULATION INNER JACKET NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE TYPE/ NO. THICKNESS SIZE INS. THICKNESS THICKNESS CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ NET WEIGHT PART SIZE OF mm mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m NUMBER (AWG) PAIRS mils mm AWG mils 20 AWG TYPE EX MULTIPLE PAIRS INDIVIDUAL AND OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE 9075.20041221 EX / 20 4 15 0.38 22 12 0.30 50 1.27 0.40 10.2 0.62 15.7 50 1.27 0.73 18.5 0.42 235 349 9075.20081221 EX / 20 8 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 313 466 9075.20101221 EX / 20 10 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 388 577 9075.20121221 EX / 20 12 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 417 621 9075.20161221 EX / 20 16 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 494 735 9075.20201221 EX / 20 20 15 0.38 22 12 0.30 60 1.52 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 571 850 9075.20241221 EX / 20 24 15 0.38 22 12 0.30 60 1.52 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 681 1,014 9075.20361221 EX / 20 36 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 877 1,305 9075.20501221 EX / 20 50 15 0.38 22 12 0.30 70 1.78 1.22 31.0 1.47 37.3 50 1.27 1.58 40.1 1.99 1,201 1,787 20 AWG TYPE JX MULTIPLE PAIRS INDIVIDUAL AND OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE 9075.20041222 JX / 20 4 15 0.38 22 12 0.30 50 1.27 0.40 10.2 0.62 15.7 50 1.27 0.73 18.5 0.42 234 348 9075.20081222 JX / 20 8 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 311 463 9075.20101222 JX / 20 10 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 386 574 9075.20121222 JX / 20 12 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 413 615 9075.20161222 JX / 20 16 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 491 730 9075.20201222 JX / 20 20 15 0.38 22 12 0.30 60 1.52 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 567 844 9075.20241222 JX / 20 24 15 0.38 22 12 0.30 60 1.52 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 676 1,006 1.67 870 1,295 9075.20361222 JX / 20 36 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 9075.20501222 JX / 20 50 15 0.38 22 12 0.30 70 1.78 1.22 31.0 1.47 37.3 50 1.27 1.58 40.1 1.99 1,190 1,771 20 AWG TYPE KX MULTIPLE PAIRS INDIVIDUAL AND OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE 9075.20041223 KX / 20 4 15 0.38 22 12 0.30 50 1.27 0.40 10.2 0.62 15.7 50 1.27 0.73 18.5 0.42 235 349 9075.20081223 KX / 20 8 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 313 466 9075.20101223 KX / 20 10 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 388 577 9075.20121223 KX / 20 12 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 417 621 9075.20161223 KX / 20 16 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 494 735 9075.20201223 KX / 20 20 15 0.38 22 12 0.30 60 1.52 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 571 850 9075.20241223 KX / 20 24 15 0.38 22 12 0.30 60 1.52 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 681 1,014 9075.20361223 KX / 20 36 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 877 1,305 9075.20501223 KX / 20 50 15 0.38 22 12 0.30 70 1.78 1.22 31.0 1.47 37.3 50 1.27 1.58 40.1 1.99 1,201 1,787 20 AWG TYPE TX MULTIPLE PAIRS INDIVIDUAL AND OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE 9075.20041224 TX / 20 4 15 0.38 22 12 0.30 50 1.27 0.40 10.2 0.62 15.7 50 1.27 0.73 18.5 0.42 236 351 9075.20081224 TX / 20 8 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 315 469 9075.20101224 TX / 20 10 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 391 581 9075.20121224 TX / 20 12 15 0.38 22 12 0.30 50 1.27 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 418 622 9075.20161224 TX / 20 16 15 0.38 22 12 0.30 60 1.52 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 497 739 9075.20201224 TX / 20 20 15 0.38 22 12 0.30 60 1.52 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 575 856 9075.20241224 TX / 20 24 15 0.38 22 12 0.30 60 1.52 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 686 1,022 9075.20361224 TX / 20 36 15 0.38 22 12 0.30 70 1.78 1.09 27.7 1.34 34.0 50 1.27 1.45 36.8 1.67 884 1,316 1.99 1,211 1,802 9075.20501224 TX / 20 50 15 0.38 22 12 0.30 70 1.78 1.22 31.0 1.47 37.3 50 1.27 1.58 40.1 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC ® Section 392.22. COND. TYPE EX ANSI MC 96.1 CONDUCTOR ALLOY AND COLOR CODE POSITIVE WIRE NEGATIVE WIRE ALLOY COLOR ALLOY COLOR Chromel Purple Constantan Red JX Iron White KX Chromel TX Copper OVERALL JACKET COLOR Purple Constantan Red Black Yellow Alumel Red Yellow Blue Constantan Red Blue TEMP. RANGE 0°C To +200°C LIMITS OF ERROR +/- 1.7°C NOM. LOOP RESISTANCE PER 100 FT @ 20°C 70.7 Ohms 0°C To +200°C +/- 2.2°C 35.7 Ohms 0°C To +200°C +/- 2.2°C 59.0 Ohms -60°C To +100°C +/- 1.0°C 29.8 Ohms Phone: 888-593-3355 www.generalcable.com SPEC 9125 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Overall Shield ® UL Type ITC-HL/PLTC, XLPE, 300 V, 90°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Cross-Linked Polyethylene (XLPE), rated 90°C per UL Standards 13 and 2250 • Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification Cable Assembly: • Individual pairs or triads and communication wire are cabled together with a left hand lay • Communication wire: 20 AWG solid bare copper, Cross-Linked Polyethylene (XLPE), rated 90°C, orange • Communication wire is not included on single pair or single triad cables Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal Phone: 888-593-3355 www.generalcable.com CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Instrumentation cables with an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods where shielding against external EMI is required • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial Applications: (cont’d) • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309 / CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9125 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Overall Shield ® UL Type ITC-HL/PLTC, XLPE, 300 V, 90°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER CROSSCOMMUNICATION WIRE INSULATION INNER JACKET NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE COND. NO. THICKNESS SIZE INS. THICKNESS THICKNESS CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ NET WEIGHT SIZE OF mm mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m (AWG) PAIRS mils mm AWG mils 16 AWG 7W (1.31 mm²) OVERALL SHIELDED PAIRS 9125.16010001 9125.16021201 9125.16041201 9125.16081201 9125.16121201 9125.16161201 9125.16241201 9125.16361201 9125.16501201 16 16 16 16 16 16 16 16 16 1 2 4 8 12 16 24 36 50 15 15 15 15 15 15 15 15 15 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 — 20 20 20 20 20 20 20 20 9125.16010002 9125.16021202 9125.16041202 9125.16081202 9125.16121202 9125.16161202 9125.16241202 9125.16361202 9125.16501202 16 16 16 16 16 16 16 16 16 1 2 4 8 12 16 24 36 50 15 15 15 15 15 15 15 15 15 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 — 20 20 20 20 20 20 20 20 — 15 15 15 15 15 15 15 15 — 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 35 40 50 60 60 60 70 70 80 0.89 1.02 1.27 1.52 1.52 1.52 1.78 1.78 2.03 0.26 0.37 0.49 0.65 0.76 0.87 1.01 1.24 1.47 6.6 9.4 12.4 16.5 19.3 22.1 25.7 31.5 37.3 0.43 0.58 0.71 0.89 1.02 1.11 1.34 1.56 1.83 10.9 14.7 18.0 22.6 25.9 28.2 34.0 39.6 46.5 50 50 50 50 50 50 50 60 60 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.52 1.52 0.54 0.69 0.82 1.00 1.13 1.22 1.45 1.69 1.96 13.7 17.5 20.8 25.4 28.7 31.0 36.8 42.9 49.8 0.23 0.38 0.54 0.80 1.02 1.18 1.67 2.27 3.06 135 235 298 412 562 665 934 1,236 1,734 201 350 443 613 836 990 1,390 1,840 2,580 0.60 0.73 0.86 1.04 1.17 1.35 1.53 1.78 2.05 15.2 18.5 21.8 26.4 29.7 34.3 38.9 45.2 52.1 0.29 0.42 0.59 0.86 1.09 1.45 1.86 2.52 3.34 158 265 358 565 793 965 1,446 1,913 2,585 235 394 533 841 1,179 1,436 2,152 2,846 3,846 16 AWG 7W (1.31 mm²) OVERALL SHIELDED TRIADS — 15 15 15 15 15 15 15 15 — 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 35 40 50 60 60 70 70 80 80 0.89 1.02 1.27 1.52 1.52 1.78 1.78 2.03 2.03 0.27 0.39 0.52 0.69 0.81 0.95 1.14 1.34 1.57 6.9 9.9 13.2 17.5 20.6 24.1 29.0 34.0 39.9 0.49 0.62 0.75 0.93 1.06 1.24 1.42 1.64 1.92 12.4 15.7 19.1 23.6 26.9 31.5 36.1 41.7 48.8 50 50 50 50 50 50 50 60 60 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.52 1.52 Dimensions and weights are nominal; subject to industry tolerances. ® ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. Phone: 888-593-3355 www.generalcable.com SPEC 9150 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield ® UL Type ITC-HL/PLTC, XLPE, 300 V, 90°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Cross-Linked Polyethylene (XLPE), rated 90°C per UL Standards 13 and 2250 • Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification Shielded Pairs/Triads: • Isolated and individually twisted pairs or triads with a Flexfoil® aluminum/ polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, two sizes smaller than insulated conductors Cable Assembly: • Individually shielded pairs or triads and communication wire are cabled together with a left-hand lay • Communication wire: 20 AWG solid bare copper, Cross-Linked Polyethylene (XLPE), rated 90°C, orange Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal Phone: 888-593-3355 www.generalcable.com CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Instrumentation cables with individually shielded pairs or triads and an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods where shielding against both external EMI and EMI between groups is required • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 Applications: (cont’d) • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9150 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield ® UL Type ITC-HL/PLTC, XLPE, 300 V, 90°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER CROSSCOMMUNICATION WIRE INSULATION INNER JACKET NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE COND. NO. THICKNESS SIZE INS. THICKNESS THICKNESS CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ NET WEIGHT SIZE OF mm mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m (AWG) PAIRS mils mm AWG mils 16 AWG 7W (1.31 mm²) OVERALL SHIELDED PAIRS 9150.16010001 9150.16021201 9150.16041201 9150.16081201 9150.16121201 9150.16161201 9150.16241201 9150.16361201 9150.16501201 16 16 16 16 16 16 16 16 16 1 2 4 8 12 16 24 36 50 15 15 15 15 15 15 15 15 15 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 — 20 20 20 20 20 20 20 20 9150.16010002 9150.16021202 9150.16041202 9150.16081202 9150.16121202 9150.16161202 9150.16241202 9150.16361202 9150.16501202 16 16 16 16 16 16 16 16 16 1 2 4 8 12 16 24 36 50 15 15 15 15 15 15 15 15 15 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 — 20 20 20 20 20 20 20 20 — 15 15 15 15 15 15 15 15 — 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 35 40 50 60 60 60 70 70 80 0.89 1.02 1.27 1.52 1.52 1.52 1.78 1.78 2.03 0.26 0.37 0.49 0.65 0.76 0.87 1.01 1.24 1.47 6.6 9.4 12.4 16.5 19.3 22.1 25.7 31.5 37.3 0.43 0.58 0.71 0.89 1.02 1.11 1.34 1.56 1.83 10.9 14.7 18.0 22.6 25.9 28.2 34.0 39.6 46.5 50 50 50 50 50 50 50 60 60 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.52 1.52 0.54 0.69 0.82 1.00 1.13 1.22 1.45 1.69 1.96 13.7 17.5 20.8 25.4 28.7 31.0 36.8 42.9 49.8 0.23 0.38 0.54 0.80 1.02 1.18 1.67 2.27 3.06 135 235 298 412 562 665 934 1,236 1,734 201 350 443 613 836 990 1,390 1,840 2,580 0.60 0.73 0.86 1.04 1.17 1.35 1.53 1.78 2.05 15.2 18.5 21.8 26.4 29.7 34.3 38.9 45.2 52.1 0.29 0.42 0.59 0.86 1.09 1.45 1.86 2.52 3.34 158 265 358 565 793 965 1,446 1,913 2,585 235 394 533 841 1,179 1,436 2,152 2,846 3,846 16 AWG 7W (1.31 mm²) OVERALL SHIELDED TRIADS — 15 15 15 15 15 15 15 15 — 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 35 40 50 60 60 70 70 80 80 0.89 1.02 1.27 1.52 1.52 1.78 1.78 2.03 2.03 0.27 0.39 0.52 0.69 0.81 0.95 1.14 1.34 1.57 6.9 9.9 13.2 17.5 20.6 24.1 29.0 34.0 39.9 0.49 0.62 0.75 0.93 1.06 1.24 1.42 1.64 1.92 12.4 15.7 19.1 23.6 26.9 31.5 36.1 41.7 48.8 50 50 50 50 50 50 50 60 60 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.52 1.52 Dimensions and weights are nominal; subject to industry tolerances. ® ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. Phone: 888-593-3355 www.generalcable.com SPEC 9225 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Overall Shield ® UL Type ITC-HL/PLTC, PVC, 300 V, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Flame-retardant Polyvinyl Chloride (PVC), rated 105°C per UL Standards 13 and 2250 • Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification Cable Assembly: • Individual pairs or triads and communication wire are cabled together with a left-hand lay • Communication wire: 22 AWG solid bare copper, flame-retardant Polyvinyl Chloride (PVC), rated 105°C, orange • Communication wire is not included on single pair or single triad cables Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Phone: 888-593-3355 www.generalcable.com Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Instrumentation cables with an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods where shielding against external EMI is required • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40° Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9225 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Overall Shield ® UL Type ITC-HL/PLTC, PVC, 300 V, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER 9225.20021221 9225.20041221 9225.20061221 9225.20081221 9225.20101221 9225.20121221 9225.20161221 9225.20201221 9225.20241221 9225.20361221 9225.20501221 9225.18021221 9225.18041221 9225.18061221 9225.18081221 9225.18101221 9225.18121221 9225.18161221 9225.18201221 9225.18241221 9225.18361221 9225.18501221 9225.16010001 9225.16021221 9225.16041221 9225.16061221 9225.16081221 9225.16101221 9225.16121221 9225.16161221 9225.16201221 9225.16241221 9225.16361221 9225.16501221 PART NUMBER 9225.20041222 9225.20081222 9225.20121222 9225.20161222 9225.20241222 9225.20361222 9225.18041222 9225.18081222 9225.18121222 9225.18161222 9225.18241222 9225.18361222 9225.16010002 9225.16041222 9225.16081222 9225.16121222 9225.16161222 9225.16241222 9225.16361222 COMMUNICATION WIRE INNER JACKET NOMINAL NOMINAL JACKET COND. NO. INSULATION CORE O.D. ARMOR O.D. THICKNESS SIZE OF THICKNESS SIZE INS. THICKNESS THICKNESS (AWG) PAIRS mils mm AWG mils mm mils mm INCHES mm INCHES mm mils mm 20 AWG 7W (0.52 mm²) OVERALL SHIELDED PAIRS 20 2 15 0.38 22 12 0.30 40 1.02 0.35 8.9 0.58 14.7 50 1.27 20 4 15 0.38 22 12 0.30 50 1.27 0.41 10.4 0.62 15.7 50 1.27 20 6 15 0.38 22 12 0.30 50 1.27 0.45 11.4 0.67 17.0 50 1.27 20 8 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 20 10 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 20 12 15 0.38 22 12 0.30 50 1.27 0.56 14.2 0.80 20.3 50 1.27 20 16 15 0.38 22 12 0.30 60 1.52 0.66 16.8 0.89 22.6 50 1.27 20 20 15 0.38 22 12 0.30 60 1.52 0.73 18.5 0.97 24.6 50 1.27 20 24 15 0.38 22 12 0.30 60 1.52 0.79 20.1 1.06 26.9 50 1.27 20 36 15 0.38 22 12 0.30 70 1.78 0.94 23.9 1.24 31.5 50 1.27 20 50 15 0.38 22 12 0.30 70 1.78 1.06 26.9 1.34 34.0 50 1.27 18 AWG 7W (0.82 mm²) OVERALL SHIELDED PAIRS 18 2 15 0.38 22 12 0.30 40 1.02 0.37 9.4 0.58 14.7 50 1.27 18 4 15 0.38 22 12 0.30 50 1.27 0.44 11.2 0.67 17.0 50 1.27 18 6 15 0.38 22 12 0.30 50 1.27 0.50 12.7 0.71 18.0 50 1.27 18 8 15 0.38 22 12 0.30 50 1.27 0.55 14.0 0.80 20.3 50 1.27 18 10 15 0.38 22 12 0.30 60 1.52 0.65 16.5 0.89 22.6 50 1.27 18 12 15 0.38 22 12 0.30 60 1.52 0.68 17.3 0.93 23.6 50 1.27 18 16 15 0.38 22 12 0.30 60 1.52 0.77 19.6 1.02 25.9 50 1.27 18 20 15 0.38 22 12 0.30 60 1.52 0.83 21.1 1.06 26.9 50 1.27 18 24 15 0.38 22 12 0.30 60 1.52 0.86 21.8 1.11 28.2 50 1.27 18 36 15 0.38 22 12 0.30 70 1.78 0.99 25.1 1.29 32.8 50 1.27 18 50 15 0.38 22 12 0.30 70 1.78 1.15 29.2 1.47 37.3 50 1.27 16 AWG 7W (1.31 mm²) OVERALL SHIELDED PAIRS 16 1 15 0.38 – – – 35 0.89 0.26 6.6 0.43 10.9 50 1.27 16 2 15 0.38 22 12 0.30 40 1.02 0.36 9.1 0.58 14.7 50 1.27 16 4 15 0.38 22 12 0.30 50 1.27 0.48 12.2 0.71 18.0 50 1.27 16 6 15 0.38 22 12 0.30 50 1.27 0.57 14.5 0.80 20.3 50 1.27 16 8 15 0.38 22 12 0.30 60 1.52 0.63 16.0 0.84 21.3 50 1.27 16 10 15 0.38 22 12 0.30 60 1.52 0.69 17.5 0.93 23.6 50 1.27 16 12 15 0.38 22 12 0.30 60 1.52 0.74 18.8 0.97 24.6 50 1.27 16 16 15 0.38 22 12 0.30 60 1.52 0.85 21.6 1.11 28.2 50 1.27 16 20 15 0.38 22 12 0.30 70 1.78 0.96 24.4 1.24 31.5 50 1.27 16 24 15 0.38 22 12 0.30 70 1.78 1.04 26.4 1.34 34.0 50 1.27 16 36 15 0.38 22 12 0.30 70 1.78 1.20 30.5 1.51 38.4 60 1.52 16 50 15 0.38 22 12 0.30 80 2.03 1.33 33.8 1.64 41.7 60 1.52 COMMUNICATION WIRE INNER JACKET NOMINAL NOMINAL JACKET COND. NO. INSULATION CORE O.D. ARMOR O.D. THICKNESS SIZE OF THICKNESS SIZE INS. THICKNESS THICKNESS (AWG) TRIADS mils mm AWG mils mm mils mm INCHES mm INCHES mm mils mm 20 AWG 7W (0.52 mm²) OVERALL SHIELDED TRIADS 20 4 15 0.38 22 12 0.30 50 1.27 0.43 10.9 0.67 17.0 50 1.27 20 8 15 0.38 22 12 0.30 50 1.27 0.52 13.2 0.75 19.1 50 1.27 20 12 15 0.38 22 12 0.30 50 1.27 0.60 15.2 0.84 21.3 50 1.27 20 16 15 0.38 22 12 0.30 60 1.52 0.70 17.8 0.93 23.6 50 1.27 20 24 15 0.38 22 12 0.30 60 1.52 0.84 21.3 1.11 28.2 50 1.27 20 36 15 0.38 22 12 0.30 70 1.78 1.00 25.4 1.29 32.8 50 1.27 18 AWG 7W (0.82 mm²) OVERALL SHIELDED TRIADS 18 4 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 18 8 15 0.38 22 12 0.30 50 1.27 0.59 15.0 0.80 20.3 50 1.27 18 12 15 0.38 22 12 0.30 60 1.52 0.72 18.3 0.97 24.6 50 1.27 18 16 15 0.38 22 12 0.30 60 1.52 0.82 20.8 1.06 26.9 50 1.27 18 24 15 0.38 22 12 0.30 70 1.78 0.97 24.6 1.24 31.5 50 1.27 18 36 15 0.38 22 12 0.30 70 1.78 1.06 26.9 1.34 34.0 50 1.27 16 AWG 7W (1.31 mm²) OVERALL SHIELDED TRIADS 16 1 15 0.38 35 0.89 0.28 7.1 0.43 10.9 50 1.27 16 4 15 0.38 22 12 0.30 50 1.27 0.51 13.0 0.75 19.1 50 1.27 16 8 15 0.38 22 12 0.30 60 1.52 0.67 17.0 0.89 22.6 50 1.27 16 12 15 0.38 22 12 0.30 60 1.52 0.79 20.1 1.06 26.9 50 1.27 16 16 15 0.38 22 12 0.30 70 1.78 0.92 23.4 1.19 30.2 50 1.27 16 24 15 0.38 22 12 0.30 70 1.78 1.11 28.2 1.42 36.1 50 1.27 16 36 15 0.38 22 12 0.30 80 2.03 1.31 33.3 1.60 40.6 60 1.52 CROSSNOMINAL SECTIONAL APPROXIMATE OVERALL O.D. AREA¹ NET WEIGHT INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m 0.69 0.73 0.78 0.82 0.86 0.91 1.00 1.08 1.17 1.35 1.45 17.5 18.5 19.8 20.8 21.8 23.1 25.4 27.4 29.7 34.3 36.8 0.38 0.42 0.48 0.54 0.59 0.66 0.80 0.93 1.09 1.45 1.67 174 198 250 283 330 353 432 500 556 711 949 260 294 372 420 492 525 644 744 827 1,058 1,412 0.69 0.78 0.82 0.91 1.00 1.04 1.13 1.17 1.22 1.40 1.58 17.5 19.8 20.8 23.1 25.4 26.4 28.7 29.7 31.0 35.6 40.1 0.38 0.48 0.54 0.66 0.80 0.86 1.02 1.09 1.18 1.56 1.99 206 249 294 337 417 449 536 623 698 965 1,280 307 370 437 501 621 668 797 927 1,038 1,436 1,905 0.54 0.69 0.82 0.91 0.95 1.04 1.08 1.22 1.35 1.45 1.65 1.78 13.7 17.5 20.8 23.1 24.1 26.4 27.4 31.0 34.3 36.8 41.9 45.2 0.23 0.38 0.54 0.66 0.72 0.86 0.93 1.18 1.45 1.67 2.17 2.52 135 239 296 366 424 522 570 687 849 956 1,283 1,786 201 355 440 545 631 777 849 1,023 1,263 1,422 1,910 2,658 CROSSNOMINAL SECTIONAL APPROXIMATE OVERALL O.D. AREA¹ NET WEIGHT INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m 0.78 0.86 0.95 1.04 1.22 1.40 19.8 21.8 24.1 26.4 31.0 35.6 0.48 0.59 0.72 0.86 1.18 1.56 247 336 427 528 694 955 367 499 636 786 1,032 1,421 0.82 0.91 1.08 1.17 1.35 1.45 20.8 23.1 27.4 29.7 34.3 36.8 0.54 0.66 0.93 1.09 1.45 1.67 291 409 554 671 936 1,256 433 609 824 999 1,393 1,869 0.54 0.86 1.00 1.17 1.30 1.53 1.73 13.7 21.8 25.4 29.7 33.0 38.9 43.9 0.23 0.58 0.80 1.09 1.34 1.86 2.38 160 353 540 727 922 1,254 1,792 238 525 803 1,082 1,372 1,866 2,667 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC ® Section 392.22. Phone: 888-593-3355 www.generalcable.com SPEC 9250 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield ® UL Type ITC-HL/PLTC, PVC, 300 V, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Flame-retardant Polyvinyl Chloride (PVC), rated 105°C per UL Standards 13 and 2250 • Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification Shielded Pairs/Triads: • Isolated and individually twisted pairs or triads with a Flexfoil® aluminum/ polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, two sizes smaller than insulated conductors Cable Assembly: • Individually shielded pairs or triads and communication wire are cabled together with a left hand lay • Communication wire: 22 AWG solid bare copper, flame-retardant Polyvinyl Chloride (PVC), rated 105°C, orange Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal Phone: 888-593-3355 www.generalcable.com CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Instrumentation cables with individually shielded pairs or triads and an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods where shielding against both external EMI and EMI between groups is required • For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 • For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503, and 505 Applications: (cont’d) • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 13 Power-Limited Circuit Cables • UL 2250 Instrumentation Tray Cable • UL 1569 Metal Clad Cables • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 • UL Type ITC-HL, UL File # E177408 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9250 April, 2011 CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield ® UL Type ITC-HL/PLTC, PVC, 300 V, 105°C, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER 9250.20021221 9250.20041221 9250.20061221 9250.20081221 9250.20101221 9250.20121221 9250.20161221 9250.20201221 9250.20241221 9250.20361221 9250.20501221 9250.18021221 9250.18041221 9250.18061221 9250.18081221 9250.18101221 9250.18121221 9250.18161221 9250.18201221 9250.18241221 9250.18361221 9250.18501221 9250.16021221 9250.16041221 9250.16061221 9250.16081221 9250.16101221 9250.16121221 9250.16161221 9250.16201221 9250.16241221 9250.16361221 9250.16501221 PART NUMBER 9250.20041222 9250.20081222 9250.20121222 9250.20161222 9250.20241222 9250.20361222 9250.18041222 9250.18081222 9250.18121222 9250.18161222 9250.18241222 9250.18361222 9250.16041222 9250.16081222 9250.16121222 9250.16161222 9250.16241222 9250.16361222 CROSSCOMMUNICATION WIRE INNER JACKET NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE COND. NO. INSULATION CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ NET WEIGHT SIZE OF THICKNESS SIZE INS. THICKNESS THICKNESS (AWG) PAIRS mils mm AWG mils mm mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m 20 AWG 7W (0.52 mm²) INDIVIDUAL AND OVERALL SHIELDED PAIRS 20 2 15 0.38 22 12 0.30 40 1.02 0.36 9.1 0.58 14.7 50 1.27 0.69 17.5 0.38 202 301 20 4 15 0.38 22 12 0.30 50 1.27 0.43 10.9 0.62 15.7 50 1.27 0.73 18.5 0.42 239 355 20 6 15 0.38 22 12 0.30 50 1.27 0.48 12.2 0.71 18.0 50 1.27 0.82 20.8 0.54 292 434 20 8 15 0.38 22 12 0.30 50 1.27 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 323 481 20 10 15 0.38 22 12 0.30 50 1.27 0.57 14.5 0.80 20.3 50 1.27 0.91 23.1 0.66 401 597 20 12 15 0.38 22 12 0.30 60 1.52 0.63 16.0 0.84 21.3 50 1.27 0.95 24.1 0.72 439 653 20 16 15 0.38 22 12 0.30 60 1.52 0.72 18.3 0.97 24.6 50 1.27 1.08 27.4 0.93 511 760 20 20 15 0.38 22 12 0.30 60 1.52 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 593 882 20 24 15 0.38 22 12 0.30 70 1.78 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 718 1,069 20 36 15 0.38 22 12 0.30 70 1.78 1.04 26.4 1.34 34.0 50 1.27 1.45 36.8 1.67 925 1,377 20 50 15 0.38 22 12 0.30 70 1.78 1.19 30.2 1.51 38.4 60 1.52 1.65 41.9 2.17 1,255 1,867 18 AWG 7W (0.82 mm²) INDIVIDUAL AND OVERALL SHIELDED PAIRS 18 2 15 0.38 22 12 0.30 40 1.02 0.38 9.7 0.58 14.7 50 1.27 0.69 17.5 0.38 216 322 18 4 15 0.38 22 12 0.30 50 1.27 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 278 414 18 6 15 0.38 22 12 0.30 50 1.27 0.55 14.0 0.75 19.1 50 1.27 0.86 21.8 0.59 345 513 18 8 15 0.38 22 12 0.30 50 1.27 0.60 15.2 0.80 20.3 50 1.27 0.92 23.4 0.67 397 590 18 10 15 0.38 22 12 0.30 60 1.52 0.67 17.0 0.89 22.6 50 1.27 1.00 25.4 0.80 489 727 18 12 15 0.38 22 12 0.30 60 1.52 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 540 803 18 16 15 0.38 22 12 0.30 60 1.52 0.79 20.1 1.06 26.9 50 1.27 1.17 29.7 1.09 645 959 18 20 15 0.38 22 12 0.30 60 1.52 0.88 22.4 1.15 29.2 50 1.27 1.26 32.0 1.26 794 1,181 18 24 15 0.38 22 12 0.30 70 1.78 0.98 24.9 1.24 31.5 50 1.27 1.35 34.3 1.45 907 1,349 18 36 15 0.38 22 12 0.30 70 1.78 1.15 29.2 1.47 37.3 50 1.27 1.58 40.1 1.99 1,227 1,826 18 50 15 0.38 22 12 0.30 80 2.03 1.36 34.5 1.69 42.9 60 1.52 1.82 46.2 2.64 1,662 2,473 16 AWG 7W (1.31 mm²) INDIVIDUAL AND OVERALL SHIELDED PAIRS 16 2 15 0.38 22 12 0.30 50 1.27 0.44 11.2 0.67 17.0 50 1.27 0.78 19.8 0.48 260 387 16 4 15 0.38 22 12 0.30 50 1.27 0.52 13.2 0.71 18.0 50 1.27 0.82 20.8 0.54 334 496 16 6 15 0.38 22 12 0.30 50 1.27 0.59 15.0 0.84 21.3 50 1.27 0.95 24.1 0.72 443 659 16 8 15 0.38 22 12 0.30 60 1.52 0.69 17.5 0.93 23.6 50 1.27 1.04 26.4 0.86 515 767 16 10 15 0.38 22 12 0.30 60 1.52 0.75 19.1 1.02 25.9 50 1.27 1.13 28.7 1.02 616 917 16 12 15 0.38 22 12 0.30 60 1.52 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 684 1,019 16 16 15 0.38 22 12 0.30 70 1.78 0.95 24.1 1.24 31.5 50 1.27 1.35 34.3 1.45 872 1,298 16 20 15 0.38 22 12 0.30 70 1.78 1.03 26.2 1.34 34.0 50 1.27 1.45 36.8 1.67 1,024 1,524 16 24 15 0.38 22 12 0.30 70 1.78 1.10 27.9 1.37 34.8 50 1.27 1.48 37.6 1.74 1,270 1,890 16 36 15 0.38 22 12 0.30 80 2.03 1.29 32.8 1.60 40.6 60 1.52 1.73 43.9 2.38 1,712 2,547 16 50 15 0.38 22 12 0.30 80 2.03 1.53 38.9 1.87 47.5 60 1.52 2.00 50.8 3.18 2,215 3,297 CROSSCOMMUNICATION WIRE INNER JACKET NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE COND. NO. INSULATION CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ NET WEIGHT SIZE OF THICKNESS SIZE INS. THICKNESS THICKNESS (AWG) TRIADS mils mm AWG mils mm mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m 20 AWG 7W (0.52 mm²) INDIVIDUAL AND OVERALL SHIELDED TRIADS 20 4 15 0.38 22 12 0.30 50 1.27 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 263 392 20 8 15 0.38 22 12 0.30 50 1.27 0.56 14.2 0.80 20.3 50 1.27 0.91 23.1 0.66 376 560 20 12 15 0.38 22 12 0.30 60 1.52 0.67 17.0 0.89 22.6 50 1.27 1.00 25.4 0.80 514 765 20 16 15 0.38 22 12 0.30 60 1.52 0.77 19.6 1.02 25.9 50 1.27 1.13 28.7 1.02 616 917 20 24 15 0.38 22 12 0.30 70 1.78 0.96 24.4 1.24 31.5 50 1.27 1.35 34.3 1.45 869 1,293 20 36 15 0.38 22 12 0.30 70 1.78 1.11 28.2 1.42 36.1 50 1.27 1.53 38.9 1.86 1,139 1,696 18 AWG 7W (0.82 mm²) INDIVIDUAL AND OVERALL SHIELDED TRIADS 18 4 15 0.38 22 12 0.30 50 1.27 0.54 13.7 0.75 19.1 50 1.27 0.86 21.8 0.59 320 477 18 8 15 0.38 22 12 0.30 60 1.52 0.69 17.5 0.93 23.6 50 1.27 1.04 26.4 0.86 485 721 18 12 15 0.38 22 12 0.30 60 1.52 0.79 20.1 1.06 26.9 50 1.27 1.17 29.7 1.09 645 959 18 16 15 0.38 22 12 0.30 70 1.78 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 797 1,185 18 24 15 0.38 22 12 0.30 70 1.78 1.06 26.9 1.34 34.0 50 1.27 1.45 36.8 1.67 1,119 1,665 18 36 15 0.38 22 12 0.30 80 2.03 1.29 32.8 1.60 40.6 60 1.52 1.73 43.9 2.38 1,570 2,336 16 AWG 7W (1.31 mm²) INDIVIDUAL AND OVERALL SHIELDED TRIADS 16 4 15 0.38 22 12 0.30 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.58 392 583 16 8 15 0.38 22 12 0.30 60 1.52 0.79 20.1 1.02 25.9 50 1.27 1.13 28.7 1.02 621 924 16 12 15 0.38 22 12 0.30 70 1.78 0.95 24.1 1.19 30.2 50 1.27 1.30 33.0 1.34 879 1,308 16 16 15 0.38 22 12 0.30 70 1.78 1.04 26.4 1.34 34.0 50 1.27 1.45 36.8 1.67 1,074 1,598 16 24 15 0.38 22 12 0.30 80 2.03 1.27 32.3 1.60 40.6 60 1.52 1.73 43.9 2.38 1,605 2,389 16 36 15 0.38 22 12 0.30 80 2.03 1.49 37.8 1.83 46.5 60 1.52 1.96 49.8 3.06 2,161 3,216 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC ® Section 392.22. Phone: 888-593-3355 www.generalcable.com SPEC 9325 February, 2011 CCW Armored Instrumentation, Pairs/Triads, Overall Shield ® UL Type MC-HL, PVC/Nylon, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Flame-retardant Polyvinyl Chloride (PVC) insulation and nylon covering, rated 90°C per UL Standard 83 • Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification Cable Assembly: • Individual pairs or triads are cabled together with a left-hand lay Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standard 1569, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL Standards 1569 and 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Phone: 888-593-3355 www.generalcable.com Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standard 1569, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored 600 volt Instrumentation cables with an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications where shielding against external EMI is required • For use in Class 1 remote-control and signal circuits in accordance with NEC Article 725 • Recognized for use in Class I, II and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 83 Thermoplastic Insulated Wire and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC-HL, CT USE, SUN RES, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9325 February, 2011 CCW Armored Instrumentation, Pairs/Triads, Overall Shield ® UL Type MC-HL, PVC/Nylon, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER COND. SIZE (AWG) NO. OF PAIRS INSULATION THICKNESS mils mm INNER JACKET NOMINAL THICKNESS CORE O.D. mils mm INCHES mm NOMINAL ARMOR O.D. INCHES mm JACKET THICKNESS mils mm CROSSNOMINAL SECTIONAL APPROXIMATE NET OVERALL O.D. AREA¹ WEIGHT INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m 18 AWG 7W (0.82 mm²) OVERALL SHIELDED PAIRS 9325.18020001 18 2 19 0.48 40 1.02 0.41 10.4 0.59 15.0 50 1.27 0.70 17.8 0.39 222 330 9325.18040001 18 4 19 0.48 40 1.02 0.48 12.2 0.65 16.5 50 1.27 0.75 19.1 0.45 268 399 9325.18080001 18 8 19 0.48 50 1.27 0.60 15.2 0.82 20.8 50 1.27 0.92 23.4 0.67 420 625 9325.18120001 18 12 19 0.48 50 1.27 0.78 19.8 1.00 25.4 50 1.27 1.10 27.9 0.96 560 833 9325.18160001 18 16 19 0.48 50 1.27 0.81 20.6 1.12 28.4 50 1.27 1.23 31.2 1.20 706 1,051 9325.18240001 18 24 19 0.48 50 1.27 1.08 27.4 1.39 35.3 50 1.27 1.49 37.8 1.77 969 1,442 16 AWG 7W (1.31 mm²) OVERALL SHIELDED PAIRS 9325.16010001 16 1 19 0.48 60 1.52 0.35 8.9 0.53 13.5 50 1.27 0.64 16.3 0.33 185 275 9325.16020001 16 2 19 0.48 40 1.02 0.38 9.7 0.58 14.7 50 1.27 0.69 17.5 0.38 246 366 9325.16040001 16 4 19 0.48 40 1.02 0.47 11.9 0.71 18.0 50 1.27 0.82 20.8 0.54 333 495 9325.16060001 16 6 19 0.48 50 1.27 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 405 603 9325.16080001 16 8 19 0.48 50 1.27 0.66 16.8 0.89 22.6 50 1.27 1.00 25.4 0.80 466 694 9325.16100001 16 10 19 0.48 50 1.27 0.76 19.3 1.02 25.9 50 1.27 1.13 28.7 1.02 556 827 9325.16120001 16 12 19 0.48 50 1.27 0.80 20.3 1.06 26.9 50 1.27 1.17 29.7 1.09 604 899 9325.16160001 16 16 19 0.48 50 1.27 0.87 22.1 1.15 29.2 50 1.27 1.26 32.0 1.26 799 1,189 9325.16200001 16 20 19 0.48 50 1.27 0.98 24.9 1.29 32.8 50 1.27 1.40 35.6 1.56 929 1,383 9325.16240001 16 24 19 0.48 50 1.27 1.08 27.4 1.37 34.8 50 1.27 1.48 37.6 1.74 1,040 1,548 9325.16360001 16 36 19 0.48 50 1.27 1.32 33.5 1.64 41.7 60 1.52 1.78 45.2 2.52 1,445 2,151 9325.16500001 16 50 19 0.48 50 1.27 1.48 37.6 1.83 46.5 60 1.52 1.96 49.8 3.06 1,897 2,823 PART NUMBER COND. SIZE (AWG) NO. OF TRIADS INSULATION THICKNESS mils INNER JACKET THICKNESS mm mils mm NOMINAL CORE O.D. INCHES mm NOMINAL ARMOR O.D. INCHES mm OVERALL JACKET THICKNESS mils mm CROSSNOMINAL SECTIONAL OVERALL O.D. AREA¹ INCHES mm APPROXIMATE NET WEIGHT (SQ. IN.) LBS/1000 FT kg/1000 m 16 AWG 7W (1.31 mm²) OVERALL SHIELDED TRIADS 9325.16010002 16 1 19 0.48 50 1.27 0.35 8.9 0.53 13.5 50 1.27 0.64 16.3 0.33 195 290 9325.16040002 16 4 19 0.48 40 1.02 0.51 13.0 0.71 18.0 50 1.27 0.82 20.8 0.54 407 606 9325.16080002 16 8 19 0.48 50 1.27 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 617 918 9325.16120002 16 12 19 0.48 50 1.27 0.85 21.6 1.11 28.2 50 1.27 1.22 31.0 1.18 897 1,334 9325.16160002 16 16 19 0.48 50 1.27 0.93 23.6 1.19 30.2 50 1.27 1.30 33.0 1.34 1,161 1,727 9325.16240002 16 24 19 0.48 50 1.27 1.16 29.5 1.47 37.3 50 1.27 1.58 40.1 1.99 1,581 2,353 9325.16360002 16 36 19 0.48 50 1.27 1.42 36.1 1.74 44.2 60 1.52 1.87 47.5 2.78 2,142 3,188 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC® Section 392.22. Phone: 888-593-3355 www.generalcable.com SPEC 9350 February, 2011 CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield ® UL Type MC-HL, PVC/Nylon, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Flame-retardant Polyvinyl Chloride (PVC) insulation and nylon covering, rated 90°C per UL Standard 83 • Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification Shielded Pairs/Triads: • Isolated and individually twisted pairs or triads with a Flexfoil® aluminum/ polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, two sizes smaller than insulated conductors Cable Assembly: • Individually shielded pairs or triads are cabled together with a left-hand lay Overall Shield: • Flexfoil® aluminum/polyester tape shield providing 100% coverage • Stranded tinned copper drain wire, same size as insulated conductors Inner Jacket: • Flame-retardant Polyvinyl Chloride (PVC) per UL Standard 1569, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Nylon rip cord to facilitate jacket removal Phone: 888-593-3355 www.generalcable.com CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL Standards 1569 and 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Overall Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standard 1569, black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored 600 volt Instrumentation cables with individually shielded pairs or triads and an overall shield provide superior protection and reliability against physical damage for use in instrumentation and process control applications where shielding against both external EMI and EMI between groups is required • For use in Class 1 remote-control and signal circuits in accordance with NEC Article 725 • Recognized for use in Class I, II and III, Divisions 1 and 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Meets cold impact at -40°C Specifications: Design Adherence: • UL 83 Thermoplastic Insulated Wire and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC-HL, CT USE, SUN RES, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9350 February, 2011 CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield ® UL Type MC-HL, PVC/Nylon, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER COND. SIZE NO. OF (AWG) PAIRS INSULATION THICKNESS mils mm INNER JACKET NOMINAL THICKNESS CORE O.D. mils mm INCHES mm NOMINAL ARMOR O.D. INCHES mm OVERALL JACKET THICKNESS mils mm NOMINAL OVERALL O.D. INCHES mm CROSSSECTIONAL APPROXIMATE AREA¹ NET WEIGHT (SQ. IN.) LBS/1000 FT kg/1000 m 18 AWG 7W (0.82 mm²) INDIVIDUAL AND OVERALL SHIELDED PAIRS 9350.18020001 18 2 19 0.48 40 1.02 0.41 10.4 0.59 15.0 50 1.27 0.70 17.8 0.39 225 335 9350.18040001 18 4 19 0.48 40 1.02 0.48 12.2 0.65 16.5 50 1.27 0.75 19.1 0.45 300 446 9350.18080001 18 8 19 0.48 50 1.27 0.60 15.2 0.82 20.8 50 1.27 0.92 23.4 0.67 450 670 9350.18120001 18 12 19 0.48 50 1.27 0.78 19.8 1.00 25.4 50 1.27 1.10 27.9 0.96 580 863 9350.18160001 18 16 19 0.48 50 1.27 0.81 20.6 1.12 28.4 50 1.27 1.23 31.2 1.20 760 1,131 9350.18240001 18 24 19 0.48 50 1.27 1.08 27.4 1.39 35.3 50 1.27 1.49 37.8 1.77 1,050 1,563 9350.16020001 16 2 19 0.48 40 1.02 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 239 355 9350.16040001 16 4 19 0.48 50 1.27 0.56 14.2 0.80 20.3 50 1.27 0.91 23.1 0.66 342 509 9350.16060001 16 6 19 0.48 50 1.27 0.66 16.8 0.89 22.6 50 1.27 1.00 25.4 0.80 429 639 9350.16080001 16 8 19 0.48 50 1.27 0.70 17.8 0.93 23.6 50 1.27 1.04 26.4 0.86 502 747 9350.16100001 16 10 19 0.48 50 1.27 0.79 20.1 1.06 26.9 50 1.27 1.17 29.7 1.09 613 912 9350.16120001 16 12 19 0.48 50 1.27 0.85 21.6 1.11 28.2 50 1.27 1.22 31.0 1.18 687 1,023 9350.16160001 16 16 19 0.48 50 1.27 0.98 24.9 1.29 32.8 50 1.27 1.40 35.6 1.56 859 1,278 9350.16200001 16 20 19 0.48 50 1.27 1.06 26.9 1.34 34.0 50 1.27 1.45 36.8 1.67 997 1,483 9350.16240001 16 24 19 0.48 50 1.27 1.12 28.4 1.42 36.1 50 1.27 1.53 38.9 1.86 1,140 1,697 9350.16360001 16 36 19 0.48 50 1.27 1.37 34.8 1.69 42.9 60 1.52 1.82 46.2 2.64 1,618 2,407 9350.16500001 16 50 19 0.48 50 1.27 1.57 39.9 1.92 48.8 60 1.52 2.05 52.1 3.34 2,166 3,224 16 AWG 7W (1.31 mm²) INDIVIDUAL AND OVERALL SHIELDED PAIRS PART NUMBER COND. SIZE NO. OF (AWG) TRIADS INSULATION THICKNESS INNER JACKET THICKNESS mils mils mm mm NOMINAL CORE O.D. INCHES mm NOMINAL ARMOR O.D. INCHES mm OVERALL JACKET THICKNESS mils mm NOMINAL OVERALL O.D. INCHES mm CROSSSECTIONAL AREA¹ APPROXIMATE NET WEIGHT (SQ. IN.) LBS/1000 FT kg/1000 m 16 AWG 7W (1.31 mm²) INDIVIDUAL AND OVERALL SHIELDED TRIADS 9350.16040002 16 4 19 0.48 50 1.27 0.61 15.5 0.84 21.3 50 1.27 0.95 24.1 0.72 403 9350.16080002 16 8 19 0.48 50 1.27 0.82 20.8 1.06 26.9 50 1.27 1.17 29.7 1.09 650 967 9350.16120002 16 12 19 0.48 50 1.27 0.98 24.9 1.24 31.5 50 1.27 1.35 34.3 1.45 853 1,269 9350.16160002 16 16 19 0.48 50 1.27 1.10 27.9 1.37 34.8 50 1.27 1.48 37.6 1.74 1,079 1,606 9350.16240002 16 24 19 0.48 50 1.27 1.33 33.8 1.64 41.7 60 1.52 1.78 45.2 2.52 1,515 2,254 9350.16360002 16 36 19 0.48 50 1.27 1.58 40.1 1.96 49.8 60 1.52 2.09 53.1 3.48 2,184 3,250 600 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC ® Section 392.22. Phone: 888-593-3355 www.generalcable.com SPEC 9500 February, 2011 CCW Armored Control With Grounding Conductor ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compressed Class B stranding per ASTM B8 Insulation: • Cross-Linked Polyethylene (XLPE) insulation per ICEA S-73-532 and UL 44, Listed XHHW-2 • Color-coded per ICEA Method 1, Table E2, full-colored insulation with stripes • Color-coded per CSA C22.2 No. 123 where applicable Grounding Conductor: • Class B stranded bare annealed copper per ASTM B3 and B8 • Cross-Linked Polyethylene (XLPE) insulation, green • Sized in accordance with NEC Table 250.122 Cable Assembly: • Insulated conductors and grounding wire are cabled together with nonhygroscopic fillers when required • A binder tape, when required, is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Meets CSA Low Acid Gas requirements Phone: 888-593-3355 www.generalcable.com Applications: Specifications: • CCW armored Control cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Design Adherence: • ICEA S-73-532/WC-57 Standard for Control, Thermocouple Extension and Instrumentation Cables • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable • CSA C22.2 No. 123 Metal Sheathed Cables • CSA C22.2 No. 174 Cables and Cable Glands for Use in Hazardous Locations Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC-HL, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC • CSA certified1 Type RA90, XLPE, HL, SR, FT4, and -40°C, CSA File # 7319 Features: • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating 1 Standard cables are also marked CSA Type RA90, except four (4) conductor cables which require a different color code, which may be special-ordered. SPEC 9500 February, 2011 CCW Armored Control With Grounding Conductor ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC COND. SIZE (AWG) PART NUMBER GREEN NOMINAL NOMINAL INSULATED INSULATION THICKNESS CORE O.D. ARMOR O.D. NO. OF GROUND COND. (AWG) mils mm INCHES mm INCHES mm CROSS90°C JACKET NOMINAL SECTIONAL APPROXIMATE NET AMPACITY THICKNESS OVERALL O.D. AREA¹ WEIGHT @ 30°C mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m AMBIENT² 14 AWG 7W (2.08 mm²) MULTI-CONDUCTOR CONTROL CABLE WITH GREEN INSULATED GROUNDING CONDUCTOR 9500.01402114 14 2 14 30 0.76 0.30 7.6 0.49 12.4 50 1.27 0.60 15.2 0.29 163 243 15 9500.01403114 14 3 14 30 0.76 0.33 8.4 0.53 13.5 50 1.27 0.64 16.3 0.33 192 286 15 9500.01404114 14 4 14 30 0.76 0.37 9.4 0.58 14.7 50 1.27 0.69 17.5 0.38 222 330 15 9500.01405114 14 5 14 30 0.76 0.39 9.9 0.60 15.2 50 1.27 0.71 18.0 0.40 245 365 15 9500.01406114 14 6 14 30 0.76 0.41 10.4 0.62 15.7 50 1.27 0.73 18.5 0.42 267 397 15 9500.01408114 14 8 14 30 0.76 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 321 478 15 9500.01411114 14 11 14 30 0.76 0.57 14.5 0.80 20.3 50 1.27 0.91 23.1 0.66 395 588 12 9500.01418114 14 18 14 30 0.76 0.69 17.5 0.93 23.6 50 1.27 1.04 26.4 0.86 554 824 12 9500.01436114 14 36 14 30 0.76 0.97 24.6 1.24 31.5 50 1.27 1.35 34.3 1.45 948 1,411 10 12 AWG 7W (3.31 mm²) MULTI-CONDUCTOR CONTROL CABLE WITH GREEN INSULATED GROUNDING CONDUCTOR 9500.01202112 12 2 12 30 0.76 0.34 8.6 0.53 13.5 50 1.27 0.64 16.3 0.33 200 298 20 9500.01203112 12 3 12 30 0.76 0.37 9.4 0.58 14.7 50 1.27 0.69 17.5 0.38 239 356 20 9500.01204112 12 4 12 30 0.76 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 310 461 20 9500.01205112 12 5 12 30 0.76 0.46 11.7 0.67 17.0 50 1.27 0.78 19.8 0.48 324 482 20 9500.01206112 12 6 12 30 0.76 0.47 11.9 0.67 17.0 50 1.27 0.78 19.8 0.48 338 503 20 9500.01208112 12 8 12 30 0.76 0.56 14.2 0.80 20.3 50 1.27 0.91 23.1 0.66 426 634 20 9500.01211112 12 11 12 30 0.76 0.65 16.5 0.89 22.6 50 1.27 1.00 25.4 0.80 519 772 15 9500.01218112 12 18 12 30 0.76 0.78 19.8 1.02 25.9 50 1.27 1.13 28.7 1.02 739 1,100 15 9500.01236112 12 36 12 30 0.76 1.10 27.9 1.37 34.8 50 1.27 1.48 37.6 1.74 1,302 1,938 12 10 AWG 7W (5.26 mm²) MULTI-CONDUCTOR CONTROL CABLE WITH GREEN INSULATED GROUNDING CONDUCTOR 9500.01002110 10 2 10 30 0.76 0.39 9.9 0.58 14.7 50 1.27 0.69 17.5 0.38 253 377 30 9500.01003110 10 3 10 30 0.76 0.41 10.4 0.62 15.7 50 1.27 0.73 18.5 0.42 303 451 30 9500.01004110 10 4 10 30 0.76 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 348 518 30 9500.01006110 10 6 10 30 0.76 0.54 13.7 0.75 19.1 50 1.27 0.86 21.8 0.59 451 671 28 9500.01008110 10 8 10 30 0.76 0.65 16.5 0.89 22.6 50 1.27 1.00 25.4 0.80 568 845 28 9500.01011110 10 11 10 30 0.76 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 704 1,048 20 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. ² Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Note: Standard cables with up to and including six (6) conductors are also marked CSA Type RA90. All others are special order. Phone: 888-593-3355 www.generalcable.com SPEC 9510 February, 2011 CCW Armored Control With Bare Grounding Conductor ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compressed Class B stranding per ASTM B8 Insulation: • Cross-Linked Polyethylene (XLPE) insulation per ICEA S-73-532 and UL 44, Listed XHHW-2 • Color-coded per ICEA Method 1, Table E2, full-colored insulation with stripes • Color-coded per CSA C22.2 No. 123 where applicable Grounding Conductor: • Class B stranded bare annealed copper per ASTM B3 and B8 • Sized in accordance with NEC Table 250.122 Cable Assembly: • Insulated conductors and grounding wire are cabled together with nonhygroscopic fillers when required • A binder tape, when required, is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Meets CSA Low Acid Gas requirements Phone: 888-593-3355 www.generalcable.com Applications: Specifications: • CCW armored Control cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Design Adherence: • ICEA S-73-532/WC-57 Standard for Control, Thermocouple Extension and Instrumentation Cables • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable • CSA C22.2 No. 123 Metal Sheathed Cables Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC-HL, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC • CSA certified1 Type RA90, XLPE, SR, FT4, and -40°C, CSA File # 7319 Features: • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating 1 Standard cables are also marked CSA Type RA90, except four (4) conductor cables which require a different color code, which may be special-ordered. SPEC 9510 February, 2011 CCW Armored Control With Bare Grounding Conductor ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER BARE NOMINAL NOMINAL COND. INSULATED INSULATION THICKNESS CORE O.D. ARMOR O.D. SIZE NO. OF GROUND (AWG) COND. (AWG) mils mm INCHES mm INCHES mm CROSS90°C JACKET NOMINAL SECTIONAL APPROXIMATE NET AMPACITY THICKNESS OVERALL O.D. AREA¹ WEIGHT @ 30°C mils mm INCHES mm SQ. IN. LBS/1000 FT kg/1000 m AMBIENT² 14 AWG 7W (2.08 mm²) MULTI-CONDUCTOR CONTROL CABLE WITH BARE GROUNDING CONDUCTOR 9510.01404114 14 4 14 30 0.76 0.35 8.8 0.52 13.3 50 1.27 0.63 16.0 0.62 203 302 9510.01405114 14 5 14 30 0.76 0.38 9.7 0.53 13.5 50 1.27 0.63 16.0 0.62 224 333 20 9510.01407114 14 7 14 30 0.76 0.43 10.9 0.60 15.2 50 1.27 0.71 18.0 0.79 287 427 17.5 9510.01409114 14 9 14 30 0.76 0.51 13.0 0.75 19.1 50 1.27 0.86 21.8 1.16 368 548 17.5 9510.01412114 14 12 14 30 0.76 0.56 14.2 0.79 20.1 50 1.27 0.89 22.6 1.24 425 632 12.5 9510.01419114 14 19 14 30 0.76 0.67 17.0 0.92 23.4 50 1.27 1.02 25.9 1.63 594 884 12.5 9510.01437114 14 37 14 30 0.76 0.94 23.9 1.22 31.0 50 1.27 1.32 33.5 2.74 1030 1533 10 20 12 AWG 7W (3.31 mm²) MULTI-CONDUCTOR CONTROL CABLE WITH BARE GROUNDING CONDUCTOR 9510.01204112 12 4 12 30 0.76 0.38 9.7 0.55 14.0 50 1.27 0.65 16.5 0.66 246 366 24 9510.01205112 12 5 12 30 0.76 0.43 10.9 0.61 15.5 50 1.27 0.71 18.0 0.79 302 449 24 9510.01207112 12 7 12 30 0.76 0.49 12.4 0.64 16.3 50 1.27 0.74 18.8 0.86 362 539 21 9510.01209112 12 9 12 30 0.76 0.58 14.7 0.79 20.1 50 1.27 0.90 22.9 1.21 458 682 21 9510.012121112 12 12 12 30 0.76 0.64 16.3 0.83 21.1 50 1.27 0.94 23.9 1.39 545 811 15 510 32 10 AWG 7W (5.26 mm²) MULTI-CONDUCTOR CONTROL CABLE WITH BARE GROUNDING CONDUCTOR 9510.01004110 10 4 10 30 0.76 0.46 11.7 0.63 16.0 50 1.27 0.73 18.5 0.84 343 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. ² Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Phone: 888-593-3355 www.generalcable.com SPEC 9525 February, 2011 CCW Armored Control Without Grounding Conductor ® UL Type MC, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Class B stranding per ASTM B8 Insulation: • Cross-Linked Polyethylene (XLPE) insulation per ICEA S-73-532 and UL 44, Listed XHHW-2 • Color-coded per ICEA Method 1, Table E2, full-colored insulation with stripes • Color-coded per CSA C22.2 No. 123 where applicable Cable Assembly: • Insulated conductors are cabled together with non-hygroscopic fillers when required • A binder tape, when required, is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Meets CSA Low Acid Gas requirements Phone: 888-593-3355 www.generalcable.com Applications: • CCW armored Control cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I and II, Division 2; Class III, Divisions 1 and 2; and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: (cont’d) • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-73-532/WC-57 Standard for Control, Thermocouple Extension and Instrumentation Cables • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 1309 Marine Shipboard Cable • CSA C22.2 No. 123 Metal Sheathed Cables Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC • CSA certified1 Type RA90, XLPE, SR, FT4, and -40°C, CSA File # 7319 Features: • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems • Meets cold impact at -40°C 1 Standard cables are also marked CSA Type RA90, except four (4) conductor cables which require a different color code, which may be special-ordered. SPEC 9525 February, 2011 CCW Armored Control Without Grounding Conductor ® UL Type MC, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER COND. SIZE (AWG) 9525.01402000 9525.01403000 9525.01404000 9525.01405000 9525.01407000 9525.01409000 9525.01412000 9525.01419000 9525.01437000 14 14 14 14 14 14 14 14 14 9525.01202000 9525.01203000 9525.01204000 9525.01205000 9525.01207000 9525.01209000 9525.01212000 9525.01219000 9525.01237000 12 12 12 12 12 12 12 12 12 NO. OF COND. INSULATION THICKNESS mils mm NOMINAL CORE O.D. INCHES mm NOMINAL ARMOR O.D. INCHES mm JACKET THICKNESS mils mm CROSSNOMINAL SECTIONAL OVERALL O.D. AREA¹ INCHES mm APPROXIMATE NET WEIGHT 90˚C AMPACITY @ (SQ. IN.) LBS/1000 FT kg/1000 m 30˚C AMBIENT² 14 AWG 7W (2.08 mm²) MULTI-CONDUCTOR CONTROL CABLE WITHOUT GROUNDING CONDUCTOR 2 3 4 5 7 9 12 19 37 30 30 30 30 30 30 30 30 30 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.28 0.30 0.33 0.37 0.41 0.50 0.57 0.69 0.96 7.1 7.6 8.4 9.4 10.4 12.7 14.5 17.5 24.4 0.49 0.49 0.53 0.58 0.62 0.71 0.80 0.93 1.24 12.4 12.4 13.5 14.7 15.7 18.0 20.3 23.6 31.5 50 50 50 50 50 50 50 50 50 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 0.60 0.60 0.64 0.69 0.73 0.82 0.91 1.04 1.35 15.2 15.2 16.3 17.5 18.5 20.8 23.1 26.4 34.3 0.29 0.29 0.33 0.38 0.42 0.54 0.66 0.86 1.45 144 155 183 213 257 312 386 544 959 214 231 273 317 383 465 575 810 1,427 15 15 15 15 15 15 12 12 10 12 AWG 7W (3.31 mm²) MULTI-CONDUCTOR CONTROL CABLE WITHOUT GROUNDING CONDUCTOR 2 3 4 5 7 9 12 19 37 30 30 30 30 30 30 30 30 30 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.31 0.34 0.38 0.42 0.47 0.56 0.65 0.78 1.08 7.9 8.6 9.7 10.7 11.9 14.2 16.5 19.8 27.4 0.53 0.53 0.58 0.62 0.67 0.80 0.89 1.02 1.37 13.5 13.5 14.7 15.7 17.0 20.3 22.6 25.9 34.8 50 50 50 50 50 50 50 50 50 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 0.64 0.64 0.69 0.73 0.78 0.91 0.99 1.13 1.48 16.3 16.3 17.5 18.5 19.8 23.1 25.1 28.7 37.6 0.33 0.33 0.38 0.42 0.48 0.66 0.78 1.02 1.74 166 192 229 266 328 410 510 731 1,318 247 285 341 395 489 611 759 1,087 1,962 20 20 20 20 20 20 15 15 12 10 AWG 7W (5.26 mm²) MULTI-CONDUCTOR CONTROL CABLE WITHOUT GROUNDING CONDUCTOR 9525.01002000 9525.01003000 9525.01004000 9525.01005000 9525.01007000 9525.01009000 9525.01012000 10 10 10 10 10 10 10 2 3 4 5 7 9 12 30 30 30 30 30 30 30 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.36 0.39 0.44 0.48 0.54 0.65 0.74 9.1 9.9 11.2 12.2 13.7 16.5 18.8 0.58 0.58 0.67 0.71 0.75 0.89 0.97 14.7 14.7 17.0 18.0 19.1 22.6 24.6 50 50 50 50 50 50 50 1.27 1.27 1.27 1.27 1.27 1.27 1.27 0.69 0.69 0.78 0.82 0.86 1.00 1.08 17.5 17.5 19.8 20.8 21.8 25.4 27.4 0.38 0.38 0.48 0.54 0.59 0.80 0.93 205 241 301 353 442 551 693 305 359 448 525 658 820 1,032 30 30 30 30 28 28 20 Dimensions and weights are nominal; subject to industry tolerances. ® ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. ® ² Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Note: Standard cables with up to and including six (6) conductors are also marked CSA Type RA90. All others are special order. Phone: 888-593-3355 www.generalcable.com SPEC 9600 February, 2011 CCW Armored Power, 3/C VFD and 4/C ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: • Bare annealed copper per ASTM B3 • 10 AWG and smaller are Class B compressed stranding per ASTM B8 • 8 AWG and larger are compact stranding per ASTM B496 Insulation: • Cross-Linked Polyethylene (XLPE) insulation per ICEA S-95-658 and UL 44, Listed XHHW-2 • 6 AWG and smaller are color-coded per ICEA Method 1, Table E2 • 4 AWG and larger are black with printed numbers per ICEA Method 4 • Color-coded per CSA C22.2 No. 123 where applicable Grounding Conductor(s): • Class B stranded bare annealed copper per ASTM B3 and B8 • Where specified, single or three split grounding wires are sized in accordance with NEC Table 250.122 Cable Assembly: • Insulated conductors and grounding wire(s) are cabled together with nonhygroscopic fillers when required • A binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C • Meets CSA Low Acid Gas requirements Phone: 888-593-3355 www.generalcable.com Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications • CCW armored cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • 3-conductor CCW power cables with three grounding wires are recommended for use with pulse-width modulated AC drives • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems Features: (cont’d) • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-95-658/WC-70 Standard for Non-Shielded Power Cable, 2 kV or Less • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable • CSA C22.2 No. 123 Metal Sheathed Cables • CSA C22.2 No. 174 Cables and Cable Glands for Use in Hazardous Locations Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC-HL, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC • CSA certified1 Type RA90, XLPE, HL, SR, FT4, and -40°C, CSA File # 7319 1 Standard cables are also marked CSA Type RA90, except four (4) conductor cables which require a different color code, which may be special-ordered. SPEC 9600 February, 2011 CCW Armored Power, 3/C VFD and 4/C ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER 9600.01403318 INSULATION COND. SIZE NO. OF THICKNESS (AWG/kcmil) COND. mils mm NOMINAL NOMINAL BARE CORE O.D. ARMOR O.D. GROUND (AWG) INCHES mm INCHES mm CROSS90°C JACKET NOMINAL SECTIONAL APPROXIMATE NET AMPACITY THICKNESS OVERALL O.D. AREA¹ WEIGHT @ 30°C mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m AMBIENT² 14 (7/W) (2.08 mm²) 3 30 0.76 3 x #18 0.33 8.4 0.53 13.5 50 1.27 0.64 16.3 0.33 163 242 15 4 30 0.76 3 x #18 0.37 9.4 0.58 14.7 50 1.27 0.69 17.5 0.38 226 336 15 12 (7/W) (3.31 mm²) 3 30 0.76 3 x #16 0.37 9.4 0.58 14.7 50 1.27 0.69 17.5 0.38 243 362 20 4 30 0.76 3 x #16 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 291 433 20 10 (7/W) (5.26 mm²) 3 30 0.76 3 x #14 0.41 10.4 0.62 15.7 50 1.27 0.73 18.5 0.42 305 454 30 4 30 0.76 3 x #14 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 354 527 30 8 (7/W) (8.36 mm²) 3 45 1.14 3 x #14 0.50 12.7 0.71 18.0 50 1.27 0.81 20.6 0.52 392 583 55 4 45 1.14 1 x #10 0.58 14.7 0.80 20.3 50 1.27 0.90 22.9 0.64 473 704 44 6 (7/W) (13.3 mm²) 3 45 1.14 3 x #12 0.58 14.7 0.80 20.3 50 1.27 0.90 22.9 0.64 534 795 75 4 45 1.14 0.66 16.8 0.89 22.6 50 1.27 0.99 25.1 0.78 641 954 60 4 (7/W) (21.2 mm²) 3 45 1.14 3 x #12 0.68 17.3 0.89 22.6 50 1.27 0.99 25.1 0.78 716 1,066 95 4 45 1.14 0.77 19.6 0.97 24.6 50 1.27 1.08 27.4 0.93 860 1,280 76 2 (7/W) (33.6 mm²) 3 45 1.14 3 x #10 0.80 20.3 1.02 25.9 50 1.27 1.13 28.7 1.02 1,013 1,507 130 4 45 1.14 0.92 23.4 1.15 29.2 50 1.27 1.26 32.0 1.26 1,267 1,885 104 1 (19/W) (42.4 mm²) 3 55 1.40 3 x #10 0.92 23.4 1.15 29.2 50 1.27 1.26 32.0 1.26 1,119 1,666 150 4 55 1.40 1.04 26.4 1.29 32.8 50 1.27 1.40 35.6 1.56 1,526 2,272 120 1/0 (19/W) (53.5 mm²) 3 55 1.40 3 x #10 1.00 25.4 1.24 31.5 50 1.27 1.34 34.0 1.43 1,496 2,226 170 4 55 1.40 1.12 28.4 1.37 34.8 50 1.27 1.48 37.6 1.74 1,862 2,771 136 2/0 (19/W) (67.4 mm²) 3 55 1.40 3 x #10 1.09 27.7 1.34 34.0 50 1.27 1.44 36.6 1.65 1,801 2,681 195 4 55 1.40 1 x #6 1.23 31.2 1.51 38.4 60 1.52 1.64 41.7 2.14 2,351 3,498 156 3/0 (19/W) (85.0 mm²) 3 55 1.40 3 x #8 1.21 30.7 1.47 37.3 60 1.52 1.58 40.1 1.99 2,262 3,367 225 4 55 1.40 1 x #4 1.36 34.5 1.65 41.9 60 1.52 1.78 45.2 2.52 2,921 4,346 180 4/0 (19/W) (107 mm²) 3 55 1.40 3 x #8 1.33 33.8 1.60 40.6 60 1.52 1.73 43.9 2.38 2,722 4,051 260 4 55 1.40 1 x #4 1.49 37.8 1.78 45.2 60 1.52 1.91 48.5 2.90 3,491 5,194 208 250 (37/W) (127 mm²) 3 65 1.65 3 x #8 1.48 37.6 1.74 44.2 60 1.52 1.87 47.5 — 3,195 4,755 290 4 65 1.65 1 x #4 1.64 41.7 1.96 49.8 60 1.52 2.09 53.1 — 4,142 6,164 232 350 (37/W) (177 mm²) 3 65 1.65 3 x #7 1.66 42.2 1.96 49.8 60 1.52 2.09 53.1 — 4,284 6,376 350 4 65 1.65 1 x #3 1.89 48.0 2.19 55.6 75 1.91 2.35 59.7 — 5,536 8,238 280 500 (37/W) (253 mm²) 3 65 1.65 3 x #6 1.94 49.3 2.28 57.9 75 1.91 2.44 62.0 — 6,035 8,981 430 4 65 1.65 1 x #2 2.14 54.4 2.49 63.2 75 1.91 2.65 67.3 — 7,704 11,464 344 750 (61/W) (380 mm²) 3 80 2.03 3 x #5 2.37 60.2 2.75 69.9 75 1.91 2.92 74.2 — 8,854 13,176 535 4 80 2.03 1 x #1 2.61 66.3 3.03 77.0 85 2.16 3.21 81.5 — 11,449 17,037 428 9600.100031110 1000 (61/W) 9600.100041110 (507 mm²) 3 80 2.03 1 x #1/0 2.67 67.8 3.11 79.0 85 2.16 3.30 83.8 — 11,611 17,280 615 4 80 2.03 1 x #1/0 3.07 78.0 3.63 92.2 85 2.16 3.81 96.8 — 15,377 22,883 492 9600.01404318 9600.01203316 9600.01204316 9600.01003314 9600.01004314 9600.00803314 9600.00804110 9600.00603312 9600.00604108 9600.00403312 9600.00404108 9600.00203310 9600.00204106 9600.00103310 9600.00104106 9600.11003310 9600.11004106 9600.21003310 9600.21004106 9600.31003308 9600.31004104 9600.41003308 9600.41004104 9600.25003308 9600.25004104 9600.35003307 9600.35004103 9600.50003306 9600.50004102 9600.75003305 9600.75004101 1 x #8 1 x #8 1 x #6 1 x #6 1 x #6 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. ² Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Note: Three (3) conductors, 6 AWG and smaller are also marked CSA Type RA90. One (1) AWG and larger are also marked CSA Type RA90. Phone: 888-593-3355 www.generalcable.com SPEC 9615 September, 2013 CCW Armored Power, 3/C VFD ® UL Type MC-HL, XLPE, 2000 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • 10 AWG and smaller are Class B compressed stranding per ASTM B8 • 8 AWG and larger are compact standing per ASTM B496 Insulation: • Cross-Linked Polyethylene (XLPE) insulation, 2000 V thicknesses per ICEA S-95-658 • Color-coded black with printed numbers per ICEA Method 4 Grounding Conductors: • Class B stranded bare annealed copper per ASTM B3 and B8 • Three (3) split grounding wires per specification 9615 exceed the minimum required in NEC Table 250.122 Cable Assembly: • Insulated conductors and grounding wires are cabled together with nonhygroscopic fillers when required • A binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) — Black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Phone: 888-593-3355 www.generalcable.com Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires is the preferred wiring method for use with AC motors controlled by pulse-width modulated Inverters in VFD applications • CCW armored cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502 and 503 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • 90°C, 2000V rated XLPE insulation with a dielectric constant less than 3.0 to withstand momentary voltage spikes common in certain VFD applications • Three (3) oversized, symmetrical grounding wires recommended for use with pulse-width modulated AC drives • CCW armor provides an impervious barrier to moisture, gas and liquids Features: (cont’d) • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-95-658/WC-70 Standard for Non-Shielded Power Cable, 2 kV or Less • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 332-3 Cat. A Compliances: • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9615 September, 2013 CCW Armored Power, 3/C VFD ® UL Type MC-HL, XLPE, 2000 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC INSULATION NO. OF THICKNESS COND. mils mm NOMINAL NOMINAL BARE CORE O.D. ARMOR O.D. GROUND (AWG) INCHES mm INCHES mm 90°C JACKET NOMINAL APPROXIMATE NET AMPACITY THICKNESS OVERALL O.D. WEIGHT @ 30°C mils mm INCHES mm LBS/1000 FT kg/1000 m AMBIENT¹ CATALOG NUMBER COND. SIZE (AWG/kcmil) 9615.01403318 14 (7/W) (2.08 mm²) 3 60 1.52 3 x #18 0.44 11.1 0.62 15.2 50 1.27 0.73 17.9 267 397 15 9615.01203316 12 (7/W) (3.31 mm²) 3 60 1.52 3 x #16 0.47 11.9 0.66 16.2 50 1.27 0.77 18.9 324 482 20 9615.01003314 10 (7/W) (5.26 mm²) 3 60 1.52 3 x #14 0.53 13.3 0.73 17.8 50 1.27 0.84 20.5 400 595 30 9615.00803314 8 (7/W) (8.36 mm²) 3 70 1.78 3 x #14 0.65 16.5 0.86 21.1 50 1.27 0.97 23.8 524 780 55 9615.00603312 6 (7/W) (13.3 mm²) 3 70 1.78 3 x #12 0.71 18.0 0.96 23.4 50 1.27 1.07 26.1 697 1,037 75 9615.00403312 4 (7/W) (21.2 mm²) 3 70 1.78 3 x #12 0.81 20.6 1.09 26.6 50 1.27 1.23 30.1 1,000 1,488 95 9615.00203310 2 (7/W) (33.6 mm²) 3 70 1.78 3 x #10 0.94 23.9 1.25 30.6 50 1.27 1.36 33.3 1,285 1,912 130 9615.00103310 1 (19/W) (42.4 mm²) 3 90 2.29 3 x #10 1.13 28.7 1.48 36.1 50 1.27 1.59 38.8 1,595 2,374 150 9615.11003310 1/0 (19/W) (53.5 mm²) 3 90 2.29 3 x #10 1.21 30.6 1.55 38.0 60 1.52 1.68 41.2 1,930 2,872 170 9615.21003306 2/0 (19/W) (67.4 mm²) 3 90 2.29 3 x #6 1.30 32.9 1.68 41.0 60 1.52 1.81 44.2 2,507 3,731 195 9615.41003304 4/0 (19/W) (107 mm²) 3 90 2.29 3 x #4 1.53 38.7 1.91 46.7 60 1.52 2.04 49.9 3,590 5,342 260 9615.25003304 250 (37/W) (127 mm²) 3 105 2.67 3 x #4 1.71 43.4 2.12 51.8 60 1.52 2.25 55.1 4,150 6,176 290 9615.35003302 350 (37/W) (177 mm²) 3 105 2.67 3 x #2 1.93 48.9 2.41 58.9 75 1.91 2.57 62.8 5,214 7,759 350 9615.50003301 500 (37/W) (253 mm²) 3 105 2.67 3 x #1 2.20 55.8 2.68 65.5 75 1.91 2.84 69.5 6,977 10,382 430 Dimensions and weights are nominal; subject to industry tolerances. ¹ Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Phone: 888-593-3355 www.generalcable.com SPEC 9625 January, 2011 CCW Armored Composite Power and Control ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • 10 AWG and smaller are Class B compressed stranding per ASTM B8 • 8 AWG and larger are compact stranding per ASTM B496 Insulation: • Cross-Linked Polyethylene (XLPE) insulation per ICEA S-95-658 and UL 44, Listed XHHW-2 • Power conductors 6 AWG and smaller are color-coded per ICEA Method 1, Table E2 • Power conductors 4 AWG and larger are black with printed numbers per ICEA Method 4 • Control conductors are color-coded black, red, blue and yellow Grounding Conductor: • Class B stranded bare annealed copper per ASTM B3 and B8 • Sized in accordance with NEC Table 250.122 Cable Assembly: • Insulated conductors and grounding wire are cabled together with nonhygroscopic fillers when required • A binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Composite Power and Control cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-95-658/WC-70 Standard for Non-Shielded Power Cables, 2 kV or Less • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC-HL, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9625 January, 2011 CCW Armored Composite Power and Control ® UL Type MC-HL, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER POWER CONTROL CONTROL CROSS90°C INSULATION BARE NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE NET AMPACITY POWER INSULATION COND. THICKNESS THICKNESS CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ WEIGHT COND. SIZE SIZE GROUNDING @ 30°C (AWG) mils mm (AWG) mils mm (AWG) INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m AMBIENT² (7/W) 9625.103124110 3x#10 (5.26 mm²) 30 0.76 (7/W) 9625.083124110 3x#8 (8.36 mm²) 45 1.14 (7/W) 9625.063124108 3x#6 (13.3 mm²) 45 1.14 (7/W) 9625.043124108 3x#4 (21.2 mm²) 45 1.14 30 0.76 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 430 640 30 0.65 16.5 0.89 22.6 50 1.27 0.99 25.1 0.78 535 796 55 0.69 17.5 0.93 23.6 50 1.27 1.03 26.2 0.84 660 982 75 0.74 18.8 0.97 24.6 50 1.27 1.08 27.4 0.93 815 1,213 95 10 (7/W) (5.2 mm²) 4 x #12 (7/W) (3.31 mm²) 30 0.76 30 0.76 8 (7/W) (8.36 mm²) 30 0.76 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. ² Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Phone: 888-593-3355 www.generalcable.com SPEC 9650 February, 2011 CCW Armored Composite Power and Control Without Ground ® UL Type MC, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Sizes 10 AWG and smaller are Class B compressed stranding per ASTM B8 • Sizes 8 AWG and larger are compact stranding per ASTM B496 Insulation: • Cross-Linked Polyethylene (XLPE) insulation per ICEA S-95-658 and UL 44, Listed XHHW-2 • Power conductors sizes 6 AWG and smaller are color-coded per ICEA Method 1, Table E2 • Power conductors sizes 4 AWG and larger are black with printed numbers per ICEA Method 4 • Control conductors are color-coded black, red, blue and yellow Cable Assembly: • Insulated conductors are cabled together with non-hygroscopic fillers when required • A binder tape, when required, is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Phone: 888-593-3355 www.generalcable.com Applications: • CCW armored Composite Power and Control cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in Class I and II, Division 2; Class III, Divisions 1 and 2; and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC Articles 330 and 725 • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330 • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems Features: (cont’d) • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-95-658/WC 70 Standard for Non-Shielded Power Cable, 2 kV or Less • UL 44 Rubber Insulated Wires and Cables • UL 1569 Metal Clad Cables • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MC, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9650 February, 2011 CCW Armored Composite Power and Control Without Ground ® UL Type MC, XLPE, 600 V, 90°C, Cable Tray Use, Sunlight-Resistant, Direct Burial UL Marine Shipboard Cable, ABS CWCMC PART NUMBER POWER CONTROL CROSS90°C INSULATION CONTROL COND. INSULATION NOMINAL NOMINAL JACKET NOMINAL SECTIONAL APPROXIMATE NET AMPACITY THICKNESS THICKNESS CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. AREA¹ WEIGHT POWER COND. SIZE SIZE @ 30°C (AWG) mils mm (AWG) mils mm INCHES mm INCHES mm mils mm INCHES mm (SQ. IN.) LBS/1000 FT kg/1000 m AMBIENT² 9650.123143000 3x#12 (7/W) (3.31 mm²) 30 0.76 3x#14 (7/W) (2.08 mm²) 30 0.76 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 307 457 20 9650.123144000 3x#12 (7/W) (3.31 mm²) 30 0.76 4x#14 (7/W) (2.08 mm²) 30 0.76 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 323 481 20 9650.124143000 4x#12 (7/W) (3.31 mm²) 30 0.76 3x#14 (7/W) (2.08 mm²) 30 0.76 0.49 12.4 0.71 18.0 50 1.27 0.82 20.8 0.54 365 543 20 9650.124144000 4x#12 (7/W) (3.31 mm²) 30 0.76 4x#14 (7/W) (2.08 mm²) 30 0.76 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 388 577 20 9650.103143000 3x#10 (7/W) (5.26 mm²) 30 0.76 3x#14 (7/W) (2.08 mm²) 30 0.76 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 384 571 30 9650.103144000 3x#10 (7/W) (5.26 mm²) 30 0.76 4x#14 (7/W) (2.08 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 392 583 30 9650.103123000 3x#10 (7/W) (5.26 mm²) 30 0.76 3x#12 (7/W) (3.31 mm²) 30 0.76 0.53 13.5 0.75 19.1 50 1.27 0.86 21.8 0.59 410 610 30 9650.104143000 4x#10 (7/W) (5.26 mm²) 30 0.76 3x#14 (7/W) (2.08 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 412 613 30 9650.104144000 4x#10 (7/W) (5.26 mm²) 30 0.76 4x#14 (7/W) (2.08 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 428 637 30 9650.104123000 4x#10 (7/W) (5.26 mm²) 30 0.76 3x#12 (7/W) (3.31 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 436 649 30 9650.104124000 4x#10 (7/W) (5.26 mm²) 30 0.76 4x#12 (7/W) (3.31 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 460 685 30 9650.083143000 3x#8 (7/W) (8.36 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.91 23.1 0.66 424 631 55 9650.083144000 3x#8 (7/W) (8.36 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.62 15.7 0.84 21.3 50 1.27 0.91 23.1 0.66 455 677 55 9650.083123000 3x#8 (7/W) (8.36 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.58 14.7 0.80 20.3 50 1.27 0.95 24.1 0.72 455 677 55 9650.083124000 3x#8 (7/W) (8.36 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.62 15.7 0.84 21.3 50 1.27 0.91 23.1 0.66 495 737 55 9650.084143000 4x#8 (7/W) (8.36 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 505 752 44 9650.084144000 4x#8 (7/W) (8.36 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.67 17.0 0.89 22.6 50 1.27 1.00 25.4 0.80 530 789 44 9650.084123000 4x#8 (7/W) (8.36 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.67 17.0 0.89 22.6 50 1.27 1.00 25.4 0.80 535 796 44 9650.084124000 4x#8 (7/W) (8.36 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 576 857 44 9650.063143000 3x#6 (7/W) (13.3 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 525 781 75 9650.063144000 3x#6 (7/W) (13.3 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 545 811 75 9650.063123000 3x#6 (7/W) (13.3 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.62 15.7 0.84 21.3 50 1.27 0.95 24.1 0.72 556 827 75 9650.063124000 3x#6 (7/W) (13.3 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.03 26.2 0.84 606 902 75 9650.064143000 4x#6 (7/W) (13.3 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 657 978 60 9650.064144000 4x#6 (7/W) (13.3 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 667 993 60 9650.064123000 4x#6 (7/W) (13.3 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 687 1,022 60 9650.064124000 4x#6 (7/W) (13.3 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 717 1,067 60 9650.043143000 3x#4 (7/W) (21.2 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 707 1,052 95 9650.043144000 3x#4 (7/W) (21.2 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 727 1,082 95 9650.043123000 3x#4 (7/W) (21.2 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.71 18.0 0.93 23.6 50 1.27 1.04 26.4 0.86 727 1,082 95 9650.043124000 3x#4 (7/W) (21.2 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.75 19.1 0.97 24.6 50 1.27 1.08 27.4 0.93 768 1,143 95 9650.044143000 4x#4 (7/W) (21.2 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 899 1,338 76 9650.044144000 4x#4 (7/W) (21.2 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 929 1,383 76 9650.044123000 4x#4 (7/W) (21.2 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 929 1,383 76 9650.044124000 4x#4 (7/W) (21.2 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 960 1,429 76 9650.023143000 3x#2 (7/W) (33.6 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 995 1,481 130 9650.023144000 3x#2 (7/W) (33.6 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 1,010 1,503 130 9650.023123000 3x#2 (7/W) (33.6 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 1,020 1,518 130 9650.023124000 3x#2 (7/W) (33.6 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.81 20.6 1.06 26.9 50 1.27 1.17 29.7 1.09 1,050 1,563 130 9650.024143000 4x#2 (7/W) (33.6 mm²) 45 1.14 3x#14 (7/W) (2.08 mm²) 30 0.76 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 1,242 1,848 104 9650.024144000 4x#2 (7/W) (33.6 mm²) 45 1.14 4x#14 (7/W) (2.08 mm²) 30 0.76 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 1,263 1,880 104 9650.024123000 4x#2 (7/W) (33.6 mm²) 45 1.14 3x#12 (7/W) (3.31 mm²) 30 0.76 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 1,273 1,894 104 9650.024124000 4x#2 (7/W) (33.6 mm²) 45 1.14 4x#12 (7/W) (3.31 mm²) 30 0.76 0.90 22.9 1.15 29.2 50 1.27 1.26 32.0 1.26 1,293 1,924 104 Dimensions and weights are nominal; subject to industry tolerances. ¹ Cross-sectional area for cable tray fill is in accordance with NEC Section 392.22. ² Ampacities in accordance with NEC Article 310 and Table 310.15(B)(16). Phone: 888-593-3355 www.generalcable.com SPEC 9675 March, 2012 CCW Armored Power, 1000 V, 3/C VFD ® CSA Type RA90, XLPE, 1000 V, 90°C, Cable Tray Use, Sunlight-Resistant Direct Burial, FT4, -40°C, AG14, HL Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Sizes 10 AWG and smaller are Class B compressed stranding per ASTM B8 • Sizes 8 AWG and larger are compact stranding per ASTM B496 Insulation: • Cross-linked Polyethylene (XLPE) insulation rated 1000 Volts, RW90 per CSA C22.2 No. 38 • Sizes 2 AWG and smaller utilize a single color insulation: black, red and blue • Sizes 1 AWG and larger utilize black insulation with printed number/color, 1-black, 2-red, 3-blue Bonding/Grounding Conductors: • Class B stranded bare annealed copper per ASTM B3 and B8 • Three (3) symmetrical grounding wires are sized in accordance with CEC Table 16 Cable Assembly: • Three symmetrical grounding wires are cabled within the interstices of the phase conductors • Non-hygroscopic fillers when required • A binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per C22.2 No. 123 Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Meets CSA Low Gas Emission requirements, AG14 Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications • CCW armored cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use in industrial and commercial installations including hazardous locations in accordance with the CEC • Can be installed in wet or dry locations, indoors or outdoors, in cable trays, in a raceway, or direct buried in accordance with the CEC Features: • 90°C, 1000 V wet or dry XLPE insulation and three (3) symmetrical grounding wires, recommended for use with pulse-width modulated AC drives • XLPE insulation has a dielectric constant less than 3.0 to withstand momentary voltage spikes common with VFD applications Features: (cont’d) • CCW armor provides an impervious barrier to moisture, gas and liquids • CCW armor provides EMI shielding performance • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems • Meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 130˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • CSA C22.2 No. 38 ThermosetInsulated Wires and Cables • CSA C22.2 No. 123 Metal Sheathed Cables • CSA C22.2 No. 174 Cables and Cable Glands for Use in Hazardous Locations Flame Tests: • CSA FT4 • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • IEEE 1202 (70,000 BTU/hr) Compliances: • CSA Certified Type RA90, XLPE, HL, SR, FT4, AG14 and -40°C, CSA File # 7319 SPEC 9675 March, 2012 CCW Armored Power, 1000 V, 3/C VFD ® CSA Type RA90, XLPE, 1000 V, 90°C, Cable Tray Use, Sunlight-Resistant Direct Burial, FT4, -40°C, AG14, HL PART NUMBER INSULATION COND. SIZE NO. OF THICKNESS (AWG/kcmil) COND. mils mm BARE 90°C NOMINAL NOMINAL JACKET NOMINAL APPROXIMATE NET GROUND AMPACITY CORE O.D. ARMOR O.D. THICKNESS OVERALL O.D. WEIGHT MIN. BEND RADIUS ¹ COND. @ 30°C (AWG) INCHES mm INCHES mm mils mm INCHES mm LBS/1000 FT kg/1000 m INCHES mm AMBIENT² 12 (7/W) 9675.01203318 (3.31 mm²) 3 45 1.14 3 x #18 0.40 10.2 0.60 15.3 50 1.27 0.70 17.8 249 370 7.0 178 30 10 (7/W) 9675.01003316 (5.26 mm²) 3 45 1.14 3 x #16 0.45 11.5 0.63 16.1 50 1.27 0.73 18.6 299 445 7.3 185 40 8 (7/W) 9675.00803314 (8.36 mm²) 3 45 1.14 3 x #14 0.50 12.7 0.76 19.2 50 1.27 0.86 21.9 417 620 8.6 218 55 6 (7/W) 9675.00603312 (13.3 mm²) 3 60 1.52 3 x #12 0.64 16.3 0.91 23.2 50 1.27 1.02 26.0 601 895 12.2 311 75 4 (7/W) 9675.00403312 (21.2 mm²) 3 60 1.52 3 x #12 0.74 18.7 0.98 24.8 50 1.27 1.08 27.4 763 1,135 12.9 329 95 2 (7/W) 9675.00203310 (33.6 mm²) 3 60 1.52 3 x #10 0.86 21.8 1.18 29.9 50 1.27 1.28 32.5 1,122 1,670 15.4 390 130 1 (19/W) 9675.00103310 (42.4 mm²) 3 80 2.03 3 x #10 1.01 25.7 1.36 34.6 50 1.27 1.46 37.1 1,404 2,090 17.5 445 145 1/0 (19/W) 9675.11003310 (53.5 mm²) 3 80 2.03 3 x #10 1.09 27.8 1.42 36.0 50 1.27 1.52 38.6 1,623 2,415 18.2 462 170 2/0 (19/W) 9675.21003310 (67.4 mm²) 3 80 2.03 3 x #10 1.18 30.0 1.56 39.6 50 1.27 1.66 42.2 2,043 3,040 20.0 506 195 (19/W) 9675.41003308 4/0 (107 mm²) 3 80 2.03 3 x #8 1.40 35.5 1.75 44.4 50 1.27 1.85 47.0 2,950 4,390 22.2 564 260 (37/W) 9675.25003308 250 (127 mm²) 3 90 2.29 3 x #8 1.49 37.8 1.90 48.2 50 1.27 2.01 51.1 3,380 5,030 24.1 612 290 (37/W) 9675.35003308 350 (177 mm²) 3 90 2.29 3 x #8 1.74 44.3 2.22 56.4 50 1.27 2.33 59.2 4,465 6,645 27.9 710 350 (37/W) 9675.50003306 500 (253 mm²) 3 90 2.29 3 x #6 2.00 50.9 2.48 63.0 50 1.27 2.59 65.8 6,152 9,155 31.0 789 430 Dimensions and weights are nominal; subject to industry tolerances. ¹ Minimum bend radius per Canadian Electrical Code, Part I, Section 12-712. ² Ampacity per Table #2, Canadian Electical Code. Phone: 888-593-3355 www.generalcable.com SPEC 9700 February, 2011 CCW Armored Power, 2.4 kV, Nonshielded, 3/C VFD ® UL Type MC-HL or MV-90, EPR, 90°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over conductor per ICEA S-96-659 and UL 1072 Insulation: • 90 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-96-659 and UL 1072 • Insulation is printed 1-black, 2-red and 3-blue for phase identification Grounding Conductors: • Three (3) split Class B stranded bare annealed copper grounding conductors • Sized in accordance with UL 1072 and NEC Table 250.122 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), yellow • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Phone: 888-593-3355 www.generalcable.com Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC • Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems Features: (cont’d) • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 90˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-96-659/WC 71 Standard for Nonshielded Cables Rated 2001 – 5000 Volts • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-90, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9700 February, 2011 CCW Armored Power, 2.4 kV, Nonshielded, 3/C VFD ® UL Type MC-HL or MV-90, EPR, 90°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm AWG NOMINAL CORE O.D. NOMINAL ARMOR O.D. INCHES mm INCHES mm JACKET THICKNESS mils NOMINAL OVERALL O.D. mm INCHES mm APPROXIMATE NET WEIGHT LBS/ 1000 FT kg/ 1000 m AMPACITY DIRECT IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-90, 90 MILS EPR, 2.4 kV, YELLOW JACKET 9700.00803312 8 (7/W) (8.36 mm²) 3 90 2.3 0.36 9.1 3 x #12 0.77 19.6 0.97 24.6 50 1.27 1.08 27.4 570 848 59 85 9700.00603310 6 (7/W) (13.3 mm²) 3 90 2.3 0.38 9.6 3 x #10 0.85 21.6 1.06 26.9 50 1.27 1.17 29.7 745 1,109 79 105 9700.00403310 4 (7/W) (21.2 mm²) 3 90 2.3 0.43 10.8 3 x #10 0.97 24.6 1.19 30.2 50 1.27 1.30 33.0 965 1,436 105 135 9700.00203310 2 (7/W) (33.6 mm²) 3 90 2.3 0.48 12.1 3 x #10 1.10 27.9 1.34 34.0 50 1.27 1.45 36.8 1,275 1,897 140 180 9700.00103308 1 (19/W) (42.4 mm²) 3 90 2.3 0.52 13.1 3 x #8 1.16 29.5 1.42 36.1 50 1.27 1.53 38.9 1,525 2,269 160 200 9700.11003308 1/0 (19/W) (53.5 mm²) 3 90 2.3 0.55 13.9 3 x #8 1.23 31.2 1.51 38.4 60 1.52 1.65 41.9 1,840 2,738 185 230 9700.21003308 2/0 (19/W) (67.4 mm²) 3 90 2.3 0.59 14.9 3 x #8 1.33 33.8 1.60 40.6 60 1.52 1.73 43.9 2,165 3,222 215 260 9700.41003307 4/0 (19/W) (107 mm²) 3 90 2.3 0.69 17.4 3 x #7 1.53 38.9 1.83 46.5 60 1.52 1.96 49.8 3,080 4,584 285 335 9700.25003307 250 (37/W) (127 mm²) 3 90 2.3 0.74 18.7 3 x #7 1.64 41.7 1.96 49.8 60 1.52 2.09 53.1 3,475 5,171 320 365 9700.35003306 350 (37/W) (177 mm²) 3 90 2.3 0.83 21.0 3 x #6 1.86 47.2 2.19 55.6 60 1.52 2.32 58.9 4,710 7,009 395 440 9700.50003305 500 (37/W) (253 mm²) 3 90 2.3 0.95 24.0 3 x #5 2.10 53.3 2.45 62.2 75 1.91 2.61 66.3 6,410 9,539 485 530 9700.75003304 750 (61/W) (380 mm²) 3 90 2.3 1.12 28.3 3 x #4 2.51 63.8 2.93 74.4 75 1.91 3.10 78.7 9,225 13,728 615 650 9700.10003304 1000 (61/W) (507 mm²) 3 90 2.3 1.27 32.2 3 x #4 2.90 73.7 3.41 86.6 80 2.03 3.59 91.2 12,080 17,977 705 730 Dimensions and weights are nominal, subject to industry tolerances. ¹ In-air ampacities are per NEC Table 310.60(C)(71) for three insulated copper conductors rated 90°C, cabled with an overall covering and isolated in air at 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors rated 90°C, cabled within an overall covering and directly buried in earth at 20°C ambient earth temperature. Phone: 888-593-3355 www.generalcable.com SPEC 9800 May, 2012 CCW Armored Power, 5 kV 133%/8 kV 100%, Shielded, 3/C VFD ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 115 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield — black, red and blue Grounding Conductors: • Three (3) split Class B stranded bare annealed copper grounding conductors • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), yellow • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC Features: (cont’d) • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable • CSA C68.3 Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9800 May, 2012 CCW Armored Power, 5 kV 133%/8 kV 100%, Shielded, 3/C VFD ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm AWG NOMINAL CORE O.D. NOMINAL ARMOR O.D. INCHES mm INCHES mm JACKET THICKNESS mils NOMINAL OVERALL O.D. mm INCHES mm APPROXIMATE NET WEIGHT LBS/ 1000 FT kg/ 1000 m 5 kV³ AMPACITY DIRECT IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 115 MILS EPR, 5 kV 133% AND 8 kV 100% INSULATION LEVEL 9800.00603310 6 (7/W) (13.3 mm²) 3 115 2.9 0.43 10.9 3 x #10 1.15 29.2 1.37 34.8 50 1.27 1.48 37.6 1,121 1,668 88 115 9800.00403310 4 (7/W) (21.2 mm²) 3 115 2.9 0.48 12.2 3 x #10 1.24 31.5 1.51 38.4 60 1.52 1.65 41.9 1,418 2,110 115 150 9800.00203310 2 (7/W) (33.6 mm²) 3 115 2.9 0.53 13.5 3 x #10 1.37 34.8 1.64 41.7 60 1.52 1.78 45.2 1,731 2,576 154 190 9800.00103308 1 (19/W) (42.4 mm²) 3 115 2.9 0.57 14.5 3 x #8 1.47 37.3 1.69 42.9 60 1.52 1.82 46.2 1,978 2,944 180 215 9800.11003308 1/0 (19/W) (53.5 mm²) 3 115 2.9 0.60 15.2 3 x #8 1.56 39.6 1.78 45.2 60 1.52 1.91 48.5 2,259 3,362 205 245 9800.21003308 2/0 (19/W) (67.4 mm²) 3 115 2.9 0.64 16.3 3 x #8 1.61 40.9 1.92 48.8 60 1.52 2.05 52.1 2,626 3,908 240 280 9800.41003307 4/0 (19/W) (107 mm²) 3 115 2.9 0.74 18.8 3 x #7 1.82 46.2 2.15 54.6 60 1.52 2.28 57.9 3,650 5,432 320 360 9800.25003306 250 (37/W) (127 mm²) 3 115 2.9 0.80 20.3 3 x #6 2.01 51.1 2.23 56.6 60 1.52 2.36 59.9 4,060 6,042 355 395 9800.35003306 350 (37/W) (177 mm²) 3 115 2.9 0.89 22.6 3 x #6 2.10 53.3 2.45 62.2 75 1.91 2.61 66.3 5,045 7,508 440 475 9800.50003305 500 (37/W) (253 mm²) 3 115 2.9 1.01 25.7 3 x #5 2.39 60.7 2.75 69.9 75 1.91 2.92 74.2 7,137 10,621 545 570 9800.75003304 750 (61/W) (380 mm²) 3 115 2.9 1.19 30.2 3 x #4 3.07 78.0 3.32 84.3 85 2.16 3.50 88.9 10,268 15,280 685 700 9800.10003304 1000 (61/W) (507 mm²) 3 115 2.9 1.34 34.0 3 x #4 3.43 87.1 3.76 95.5 85 2.16 3.94 100.1 13,051 19,422 790 785 Dimensions and weights are nominal; subject to industry tolerances. ¹ In-air ampacities are per NEC Table 310.60(C)(71) for three insulated copper conductors rated 105°C, cabled with an overall covering and isolated in air at 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors rated 105°C, cabled within an overall covering and directly buried in earth at 20°C ambient earth temperature. ³ For 8 kV ampacities, refer to NEC Tables 310.60(C)(71) and 310.60(C)(83) for cables listed 5001-35,000 volts. Phone: 888-593-3355 www.generalcable.com SPEC 9815 May, 2012 CCW Armored Power, 8 kV 133%, Shielded, 3/C VFD ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 140 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield - black, red and blue Grounding Conductors: • Three (3) split Class B stranded bare annealed copper grounding conductors • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of the NEC Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), yellow • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC Features: (cont’d) • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable • CSA C68.3 Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9815 May, 2012 CCW Armored Power, 8 kV 133%, Shielded, 3/C VFD ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm AWG NOMINAL CORE O.D. NOMINAL ARMOR O.D. INCHES mm INCHES mm JACKET THICKNESS NOMINAL OVERALL O.D. APPROXIMATE NET WEIGHT mils INCHES LBS/ 1000 FT mm mm kg/ 1000 m AMPACITY DIRECT IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 140 MILS EPR, 8 kV 133% INSULATION LEVEL 9815.00603310 6 (7/W) (13.3 mm²) 3 140 3.6 0.48 12.2 3 x #10 1.20 30.5 1.60 40.6 60 1.52 1.73 43.9 1,350 2,009 105 120 9815.00403310 4 (7/W) (21.2 mm²) 3 140 3.6 0.53 13.5 3 x #10 1.29 32.8 1.70 43.2 60 1.52 1.83 46.5 1,600 2,381 135 155 9815.00203310 2 (7/W) (33.6 mm²) 3 140 3.6 0.58 14.7 3 x #10 1.42 36.1 1.85 47.0 60 1.52 1.98 50.3 2,000 2,976 185 200 9815.00103308 1 (19/W) (42.4 mm²) 3 140 3.6 0.62 15.7 3 x #8 1.52 38.6 1.93 49.0 60 1.52 2.06 52.3 2,275 3,386 210 225 9815.11003308 1/0 (19/W) (53.5 mm²) 3 140 3.6 0.65 16.5 3 x #8 1.61 40.9 2.03 51.6 60 1.52 2.16 54.9 2,600 3,869 240 255 9815.21003308 2/0 (19/W) (67.4 mm²) 3 140 3.6 0.69 17.5 3 x #8 1.66 42.2 2.14 54.4 60 1.52 2.27 57.7 2,950 4,390 275 290 9815.41003307 4/0 (19/W) (107 mm²) 3 140 3.6 0.79 20.1 3 x #7 1.87 47.5 2.40 61.0 75 1.91 2.56 65.0 4,025 5,990 360 375 9815.25003306 250 (37/W) (127 mm²) 3 140 3.6 0.85 21.6 3 x #6 2.06 52.3 2.59 65.8 75 1.91 2.75 69.9 4,600 6,846 400 410 9815.35003306 350 (37/W) (177 mm²) 3 140 3.6 0.94 23.9 3 x #6 2.15 54.6 2.85 72.4 75 1.91 3.01 76.5 5,800 8,631 490 495 9815.50003305 500 (37/W) (253 mm²) 3 140 3.6 1.06 26.9 3 x #5 2.44 62.0 3.19 81.0 85 2.16 3.37 85.6 7,800 11,608 600 590 9815.75003304 750 (61/W) (380 mm²) 3 140 3.6 1.26 32.0 3 x #4 3.19 81.0 3.68 93.5 85 2.16 3.86 98.0 10,750 15,998 745 720 9815.10003304 1000 (61/W) (507 mm²) 3 140 3.6 1.42 36.1 3 x #4 3.48 88.4 3.98 101.1 85 2.16 4.16 105.7 13,550 20,165 860 810 Dimensions and weights are nominal; subject to industry tolerances. ¹ In-air ampacities are per NEC Table 310.60(C)(71) for three insulated copper conductors rated 105°C, cabled with an overall covering and isolated in air at 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors rated 105°C, cabled within an overall covering and directly buried in earth at 20°C ambient earth temperature. Phone: 888-593-3355 www.generalcable.com SPEC 9825 May, 2012 CCW Armored Power, 15 kV 100%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 175 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield - black, red and blue Grounding Conductor: • Class B stranded bare annealed copper grounding conductor • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of the NEC Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), red • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation Features: (cont’d) • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9825 May, 2012 CCW Armored Power, 15 kV 100%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm AWG NOMINAL CORE O.D. NOMINAL ARMOR O.D. INCHES mm INCHES mm JACKET THICKNESS NOMINAL OVERALL O.D. APPROXIMATE NET WEIGHT mils INCHES LBS/ 1000 FT mm mm kg/ 1000 m AMPACITY DIRECT IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 175 MILS EPR, 15 kV 100% INSULATION LEVEL 9825.00203106 2 (7/W) (33.6 mm²) 3 175 4.4 0.65 16.5 6 1.61 40.9 1.96 49.8 60 1.52 2.05 52.1 2,077 3,091 185 200 9825.00103104 1 (19/W) (42.4 mm²) 3 175 4.4 0.69 17.5 4 1.68 42.7 2.01 51.1 60 1.52 2.15 54.6 2,469 3,674 210 225 9825.11003104 1/0 (19/W) (53.5 mm²) 3 175 4.4 0.72 18.3 4 1.78 45.2 2.10 53.3 60 1.52 2.24 56.9 2,760 4,107 240 255 9825.21003104 2/0 (19/W) (67.4 mm²) 3 175 4.4 0.76 19.3 4 1.88 47.8 2.19 55.6 60 1.52 2.36 59.9 3,130 4,658 275 290 9825.41003103 4/0 (19/W) (107 mm²) 3 175 4.4 0.86 21.8 3 2.09 53.1 2.45 62.2 75 1.91 2.61 66.3 4,290 6,384 360 375 9825.25003102 250 (37/W) (127 mm²) 3 175 4.4 0.92 23.4 2 2.19 55.6 2.58 65.5 75 1.91 2.74 69.6 4,775 7,106 400 410 9825.35003102 350 (37/W) (177 mm²) 3 175 4.4 1.01 25.7 2 2.45 62.2 2.85 72.4 75 1.91 3.01 76.5 6,132 9,125 490 495 9825.50003101 500 (37/W) (253 mm²) 3 175 4.4 1.13 28.7 1 2.71 68.8 3.16 80.3 85 2.16 3.34 84.8 8,052 11,983 600 590 9825.750031110 750 (61/W) (380 mm²) 3 175 4.4 1.31 33.3 1/0 3.12 79.2 3.67 93.2 85 2.16 3.85 97.8 11,098 16,516 745 720 Dimensions and weights are nominal; subject to industry tolerances. ¹ Ampacities in air are per NEC Table 310.60(C)(71) for an insulated three-conductor copper cable isolated in air with 105°C rated conductors at a 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors cabled within an overall covering, directly buried in earth with 105°C rated conductors at 20°C ambient earth temperature. Phone: 888-593-3355 www.generalcable.com SPEC 9835 May, 2012 CCW Armored Power, 15 kV 133%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 220 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield - black, red and blue Grounding Conductor: • Class B stranded bare annealed copper grounding conductor • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of the NEC Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), red • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation Features: (cont’d) • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9835 May, 2012 CCW Armored Power, 15 kV 133%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm NOMINAL CORE O.D. NOMINAL ARMOR O.D. AWG INCHES mm INCHES mm JACKET THICKNESS mils mm NOMINAL OVERALL O.D. INCHES mm APPROXIMATE NET WEIGHT LBS/ 1000 FT kg/ 1000 m AMPACITY DIRECT IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 220 MILS EPR, 15 kV 133% INSULATION LEVEL 9835.00203106 2 (7/W) (33.6 mm²) 3 220 5.6 0.76 19.3 6 1.82 46.2 2.15 54.6 60 1.52 2.28 57.9 2,473 3,680 185 200 9835.00103104 1 (19/W) (42.4 mm²) 3 220 5.6 0.79 20.1 4 1.88 47.8 2.23 56.6 60 1.52 2.36 59.9 2,811 4,183 210 225 9835.11003104 1/0 (19/W) (53.5 mm²) 3 220 5.6 0.83 21.1 4 1.96 49.8 2.32 58.9 75 1.91 2.48 63.0 3,190 4,747 240 255 9835.21003104 2/0 (19/W) (67.4 mm²) 3 220 5.6 0.87 22.1 4 2.06 52.3 2.40 61.0 75 1.91 2.56 65.0 3,630 5,402 275 290 9835.41003103 4/0 (19/W) (107 mm²) 3 220 5.6 0.97 24.6 3 2.26 57.4 2.62 66.5 75 1.91 2.79 70.9 4,435 6,600 360 345 9835.25003102 250 (37/W) (127 mm²) 3 220 5.6 1.03 26.2 2 2.36 59.9 2.75 69.9 75 1.91 2.92 74.2 5,086 7,569 400 410 9835.35003102 350 (37/W) (177 mm²) 3 220 5.6 1.12 28.4 2 2.61 66.3 3.03 77.0 85 2.16 3.21 81.5 6,445 9,591 490 495 9835.50003101 500 (37/W) (253 mm²) 3 220 5.6 1.24 31.5 1 2.86 72.6 3.32 84.3 85 2.16 3.50 88.9 8,376 12,465 600 590 9835.750031110 750 (61/W) (380 mm²) 3 220 5.6 1.41 35.8 1/0 3.25 82.6 3.80 96.5 85 2.16 3.98 101.1 11,431 17,011 745 720 Dimensions and weights are nominal; subject to industry tolerances. ¹ Ampacities in air are per NEC Table 310.60(C)(71) for an insulated three-conductor copper cable isolated in air with 105°C rated conductors at a 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors cabled within an overall covering, directly buried in earth with 105°C rated conductors at 20°C ambient earth temperature. Phone: 888-593-3355 www.generalcable.com SPEC 9845 May, 2012 CCW Armored Power, 25 kV 100%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 260 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield - black, red and blue Grounding Conductor: • Class B stranded bare annealed copper grounding conductor • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of the NEC Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL 1072, orange • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation Features: (cont’d) • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9845 May, 2012 CCW Armored Power, 25 kV 100%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm AWG NOMINAL CORE O.D. NOMINAL ARMOR O.D. INCHES mm INCHES mm JACKET THICKNESS NOMINAL OVERALL O.D. APPROXIMATE NET WEIGHT mils INCHES LBS/ 1000 FT mm mm kg/ 1000 m AMPACITY DIRECT IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 260 MILS EPR, 25 kV 100% INSULATION LEVEL 9845.00103104 1 (19/W) (42.4 mm²) 3 260 6.6 0.87 22.1 4 2.07 52.6 2.45 62.2 75 1.91 2.61 66.3 3,189 4,746 210 225 9845.11003104 1/0 (19/W) (53.5 mm²) 3 260 6.6 0.90 22.9 4 2.15 54.6 2.53 64.3 75 1.91 2.69 68.3 3,536 5,262 240 255 9845.21003104 2/0 (19/W) (67.4 mm²) 3 260 6.6 0.94 23.9 4 2.24 56.9 2.62 66.5 75 1.91 2.79 70.9 3,939 5,862 275 290 9845.41003103 4/0 (19/W) (107 mm²) 3 260 6.6 1.04 26.4 3 2.51 63.8 2.93 74.4 75 1.91 3.10 78.7 5,122 7,622 360 345 9845.25003102 250 (37/W) (127 mm²) 3 260 6.6 1.10 27.9 2 2.61 66.3 3.07 78.0 85 2.16 3.25 82.6 5,819 8,660 400 410 9845.35003102 350 (37/W) (177 mm²) 3 260 6.6 1.19 30.2 2 2.82 71.6 3.32 84.3 85 2.16 3.50 88.9 7,115 10,588 490 495 9845.50003101 500 (37/W) (253 mm²) 3 260 6.6 1.31 33.3 1 3.08 78.2 3.62 91.9 85 2.16 3.81 96.8 9,125 13,579 600 590 Dimensions and weights are nominal; subject to industry tolerances. ¹ In-air ampacities are per NEC Table 310.60(C)(71) for three insulated copper conductors rated 105°C, cabled with an overall covering and isolated in air at 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors rated 105°C, cabled within an overall covering and directly buried in earth at 20°C ambient earth temperature. Phone: 888-593-3355 www.generalcable.com SPEC 9855 February, 2011 CCW Armored Power, 25 kV 133%/35 kV 100%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 345 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield - black, red and blue Grounding Conductor: • Class B stranded bare annealed copper grounding conductor • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of the NEC Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL 1072, orange • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation Features: (cont’d) • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9855 February, 2011 CCW Armored Power, 25 kV 133%/35 kV 100%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm NOMINAL CORE O.D. NOMINAL ARMOR O.D. AWG INCHES mm INCHES mm JACKET THICKNESS mils mm NOMINAL OVERALL O.D. INCHES mm APPROXIMATE NET WEIGHT LBS/ 1000 FT AMPACITY kg/ DIRECT 1000 m IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 345 MILS EPR, 25 kV 133% AND 35 kV 100% INSULATION LEVEL³ 9855.00103104 1 (19/W) (42.4 mm²) 3 345 8.8 1.04 26.4 4 2.48 63.0 2.89 73.4 75 1.91 3.05 77.5 4,100 6,101 210 225 9855.11003104 1/0 (19/W) (53.5 mm²) 3 345 8.8 1.07 27.2 4 2.56 65.0 2.98 75.7 75 1.91 3.14 79.8 4,500 6,697 240 255 9855.21003104 2/0 (19/W) (67.4 mm²) 3 345 8.8 1.11 28.2 4 2.65 67.3 3.11 79.0 85 2.16 3.30 83.8 4,950 7,366 275 290 9855.41003103 4/0 (19/W) (107 mm²) 3 345 8.8 1.22 31.0 3 2.88 73.2 3.41 86.6 85 2.16 3.60 91.4 6,200 9,227 360 345 9855.25003103 250 (37/W) (127 mm²) 3 345 8.8 1.27 32.3 3 2.97 75.4 3.63 92.2 85 2.16 3.81 96.8 6,800 10,119 400 410 9855.35003102 350 (37/W) (177 mm²) 3 345 8.8 1.36 34.5 2 3.20 81.3 3.76 95.5 85 2.16 3.94 100.1 8,000 11,905 490 495 9855.50003101 500 (37/W) (253 mm²) 3 345 8.8 1.48 37.6 1 3.45 87.6 4.10 104.1 85 2.16 4.23 107.4 10,150 15,105 600 590 Dimensions and weights are nominal; subject to industry tolerances. ¹ In-air ampacities are per NEC Table 310.60(C)(71) for three insulated copper conductors rated 105°C, cabled with an overall covering and isolated in air at 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors rated 105°C, cabled within an overall covering and directly buried in earth at 20°C ambient earth temperature. ³ Part number 9855.00103104, 1 AWG, 3 conductor is only listed 25 kV 133% insulation level in accordance with UL 1072. Phone: 888-593-3355 www.generalcable.com SPEC 9875 February, 2011 CCW Armored Power, 35 kV 133%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 420 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield - black, red and blue Grounding Conductor: • Class B stranded bare annealed copper grounding conductor • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with nonhygroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1072 and UL 1569 • CCW armor conductivity meets the grounding requirements of the NEC Phone: 888-593-3355 www.generalcable.com Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL 1072, orange • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Applications: • CCW armored Medium-Voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits in industrial power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets the grounding requirements of UL 1072 and the NEC • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation Features: (cont’d) • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Cable meets cold impact at -40°C • 105˚C continuous operating temperature, wet or dry • 140˚C emergency rating • 250˚C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC-74, 5-46 kV Shielded Power Cable • AEIC CS8 Specification for Shielded Power Cable, 5-46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1072 • IEC 60332-3 Category A Compliances: • UL Type MV-105, UL File # E90501 • UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90496 • UL Listed Marine Shipboard, UL File # E85994 • American Bureau of Shipping (ABS) Listed for CWCMC SPEC 9875 February, 2011 CCW Armored Power, 35 kV 133%, Shielded, 3/C ® UL Type MC-HL or MV-105, EPR, 105°C, Cable Tray Use, Sunlight-Resistant Direct Burial, ABS CWCMC COND. SIZE PART NUMBER INSULATION THICKNESS NO. OF AWG (kcmil) COND. mils NOMINAL O.D. OVER BARE INSULATION GROUND mm INCHES mm NOMINAL CORE O.D. NOMINAL ARMOR O.D. AWG INCHES mm INCHES mm JACKET THICKNESS mils mm NOMINAL OVERALL O.D. INCHES mm APPROXIMATE NET WEIGHT LBS/ 1000 FT AMPACITY kg/ DIRECT 1000 m IN AIR¹ BURIAL² 3/C WITH GROUND MC-HL OR MV-105, 420 MILS EPR, 35 kV 133% INSULATION LEVEL 9875.11003104 1/0 (19/W) (53.5 mm²) 3 420 10.7 1.24 31.5 4 2.91 73.9 3.41 86.6 85 2.16 3.59 91.2 5,300 7,887 240 255 9875.21003104 2/0 (19/W) (67.4 mm²) 3 420 10.7 1.27 32.3 4 3.02 76.7 3.63 92.2 85 2.16 3.81 96.8 6,000 8,929 275 290 9875.41003103 4/0 (19/W) (107 mm²) 3 420 10.7 1.38 35.1 3 3.23 82.0 3.80 96.5 85 2.16 3.98 101.1 7,100 10,566 360 345 9875.25003103 250 (37/W) (127 mm²) 3 420 10.7 1.43 36.3 3 3.40 86.4 3.98 101.1 85 2.16 4.16 105.7 8,100 12,054 400 410 9875.35003102 350 (37/W) (177 mm²) 3 420 10.7 1.52 38.6 2 3.51 89.2 4.10 104.1 85 2.16 4.29 109.0 9,000 13,393 490 495 9875.50003101 500 (37/W) (253 mm²) 3 420 10.7 1.64 41.7 1 3.81 96.8 4.45 113.0 85 2.16 4.63 117.6 11,100 16,519 600 590 Dimensions and weights are nominal; subject to industry tolerances. ¹ In-air ampacities are per NEC Table 310.60(C)(71) for three insulated copper conductors rated 105°C, cabled with an overall covering and isolated in air at 40°C ambient temperature. ² Direct burial ampacities are per NEC Table 310.60(C)(83) for three insulated copper conductors rated 105°C, cabled within an overall covering and directly buried in earth at 20°C ambient earth temperature. Phone: 888-593-3355 www.generalcable.com SPEC 9900 January, 2010 CCW Armored Cable Tool Kit ® For Removal of CCW Armor Sheath Including Accessories Tool Kit Contents: • 1 ea. Kett-Tool Metal Clad Cable Saw • 12 pcs. 2" / 44 teeth Cutting Blades • Cable Saw Spindle and Allen Wrenches • 1 ea. MC Cable Guide • 1 ea. Tubing and Pipe Cutter • 1 ea. 12" V-Jaw Channel-Lock Pliers • 1 ea. 10" Hacksaw Frame • 3 ea. 10" / 24 teeth/in. Hacksaw Blades • 1 ea. 10 ft. Tape Measure • 1 ea. Utility Knife with Blades • 1 ea. 5/16" Screwdriver • 1 ea. Tool Box Phone: 888-593-3355 www.generalcable.com PART NUMBER QUANTITY DESCRIPTION APPROXIMATE WEIGHT 9900.KS226 1 CCW TOOL KIT WITH 120 V AC, 60Hz ELECTRIC CUTTING SAW 22.0 LBS 9900.PS526 1 CCW TOOL KIT WITH 90PSI PNEUMATIC CUTTING SAW 20.0 LBS 9900.15744 1 2", 44T REPLACEMENT CUTTING BLADES (12 BLADES PER PACK) 1.0 LBS 9900.27901 1 MC CABLE GUIDE 0.5 LBS Technical January, 2013 Table of Contents Technical Information SPECIFICATION NO. DESCRIPTION A001 Metal-Clad CCW® Type MC-HL Wiring System A001 CCW® Installation Manual A001 CCW® Sheath Removal Instructions A010 CCW® Explosion-Proof Gland Cross-Reference A015 CCW® Part Number Cross-Reference — Okonite C-L-X® to General Cable CCW® A030 Reference Standards A055 Checklist for CCW® Specifications A100 Common Color Sequence A150 Metric Conversion Factors A185 AWG (American Wire Gauge) to mm2 (Millimeters Squared) Conversion B025 Class B Conductors for General Wiring D005 Recommended Reel Handling Practices D025 Recommended Cable Handling Practices D050 Recommended Cable Storage Practices E005 Pre-Installation Instructions E050 Installation — Feed-In Setups E075 Installation — Conductor Maximum Pulling Tensions E100 Installation — Training and Bending Limitations E125 Installation — Maximum Sidewall Pressure F005 DC “HI-POT” Pre-Test Guidelines for MV Cables F025 DC “HI-POT” Testing Guidelines for MV Cables F075 Field Electrical “HI-POT” Testing Guidelines F130 CCW® Sheath as a Grounding Conductor Index Part Number Index REVISION DATE Feb. 2011 Jul. 2011 Feb. 2011 Apr. 2010 Jan. 2013 Apr. 2010 Apr. 2010 Apr. 2011 Sept. 2010 Sept. 2010 Mar. 2012 Mar. 2012 Oct. 2011 Nov. 2011 Apr. 2010 Apr. 2010 Mar. 2012 Apr. 2010 Jan. 2011 Apr. 2010 Apr. 2010 Apr. 2010 Dec. 2010 Jan. 2013 Phone: 888-593-3355 www.generalcable.com SPEC A001 February, 2011 Metal-Clad CCW Type MC-HL Wiring System ® The Most Versatile Wiring Method Available Ideal for Hazardous (Classified) Locations Provides Best Performance for PWM Circuits CCW® is General Cable’s trade name for the continuously corrugated, welded, aluminum-sheathed wiring system. CCW provides a unique cable system within a sealed metallic sheath that provides complete protection to the conductors from all external environments. CCW is offered in a complete line of power, control, signal, and instrumentation cables. Phone: 888-593-3355 www.generalcable.com SPEC A001 July, 2011 CCW Installation Manual ® Introduction CCW provides a unique wiring system that is unparalleled in versatility for practically every installation condition or requirement. CCW Has Almost-Universal Applications CCW Is A Self-Contained Wiring System • In cable tray, where identified for such use – see 392.10, 392.20(A), (B) and (C) • As aerial cable on MessengerSupported Wiring or installed outside of buildings or structures – see 225.10, 396.10, and 396.12 • In any raceway • In hazardous (classified) locations Class I, Division 1 [511.7, 513.7, 515.7, and 516.7] Class I, Division 2 [501.10(B)(1) and (5)] Class I, Zone 2 [505.15(C)(1)(b)] CCW Type MC The CCW wiring system consists of conductors or a cable enclosed in a raceway consisting of a strong, pliable aluminum metallic sheath that is continuously welded to provide a completely enclosed gas/vaportight metallic sheath that is then corrugated. Corrugating the aluminum sheath provides greater crush and impact resistance for mechanical protection of the conductors and increases the pliability of the cable during installation. The standard corrugated aluminum sheath used on all CCW cables complies with the more severe crush and impact requirements of UL 2225 for HL cables permitted in hazardous locations. CCW Type MC Metal-Clad Cable has been installed in some of the most demanding applications for over 40 years and has become an industry standard for industrial and commercial applications. CCW is available in low- and mediumvoltage power, control, signal, and instrumentation cables. As CCW is rated MC-HL, it can be used in any Type MC application, as it complies with UL 1569, Metal-Clad Aluminum Cable. CCW has been recognized by the National Electrical Code® (NEC® ) for more than 40 years, and the permitted uses of CCW in the NEC have been significantly expanded over the years, as users have recognized the unique advantages of this factory-assembled wiring system and inspectors have observed and recognized the troublefree performance of CCW in all the uses permitted. NEC Article 330 is the primary article for CCW Metal-Clad Type MC Cable. In accordance with this Article, CCW rated from 600 V to 35 kV is permitted to be used in the applications shown below; the additional references included refer to the 2011 NEC. • For services, feeders, and branch circuits • For power, lighting, control, and signaling circuits • As exposed runs “ER” (formerly open wiring) or concealed • Indoors or outdoors Class II, Division 2 [502.10(B)(3) and (6)] Class III, Divisions 1 and 2 [503.10(A) and (B)] Intrinsically Safe Circuits [504.20] Zone 22 [506.15(C)(3) and (6)] [Not included in UL 2225] • Special Occupancies – see Articles 517 through 552 • As Service-Entrance Cable – see 230.43 • In wet and dry locations – since the metallic covering is impervious to moisture, the insulated conductors under the metallic sheath are listed for use in wet locations, and a corrosion-resistant protective nonmetallic jacket is provided over the metallic sheath • To be direct buried or encased in concrete, since CCW has a corrosion-resistant protective nonmetallic jacket over the metallic sheath – see 300.5 or 300.50, as appropriate • As single-conductors when all the phase conductors and, where used, the neutral conductor are grouped together to minimize induced voltage on the sheath – see 300.20 Unless otherwise stated, all references refer to the 2011 NEC®. Phone: 888-593-3355 www.generalcable.com SPEC A001 July, 2011 CCW Installation Manual ® CCW Type MC-HL CCW Type MC-HL contains separate equipment grounding conductor(s) sized in accordance with 250.122 in all constructions, in addition to the standard gas/vapor-tight continuously corrugated metallic sheath and overall jacket of suitable polymeric materials and complies with UL 2225, Standard for Cables and Cable Fittings For Use In Hazardous (Classified) Locations. UL 2225 also includes additional requirements that the cable comply with a -40°C low temperature impact test, more severe room temperature crush and impact tests, and a more severe vertical tray flame test. When installed with termination fittings listed for the application, CCW MC-HL may be used in industrial establishments with restricted public access, where the conditions of maintenance and supervision ensure that only qualified persons service the installation. In addition to all the uses permitted for CCW Type MC, CCW Type MC-HL is also permitted to be installed in the following hazardous (classified) locations: Class I, Division 1 [501.10(A)(1)(c)] Class I, Zone 1 [505.15(B)(1)(b)] Class II, Division 1 [502.10(A)(1) and (3)] Zones 20 and 21 [506.15(A)(3) and (B)(1)] [Not included in UL 2225] CCW Type MV or MC CCW Type MV or MC contains conductors rated 105°C and is available from 2400 V to 35 kV. The cable complies with both UL 1569, MetalClad Aluminum Cable, and UL 1072, Medium-Voltage Power Cables, and is listed and marked as Type MV or MC. The cable is permitted to be used in accordance with 328.10 and 330.10 and installed in the same applications as CCW Type MC. CCW Remote-Control, Signaling, and Power-Limited Cables CCW Type MC and CCW Type MCHL are permitted to be used on 600 V Class 1 power-limited circuits, Class 1 remote-control and signaling circuits, and the supply side of Class 2 or Class 3 power sources in the applications and locations shown above for the applicable cable type, subject to any limitations specified in Part II of Article 725, also see 725.127. Type MC cable is permitted to be installed in compliance with Parts II and III of Article 725 and 770.133 as applicable and in accordance with 330.10(B)(1) through (B)(4). CCW Type ITC-HL CCW Instrumentation Tray Cable Type ITC-HL is permitted to be installed in accordance with Article 501.10(A)(1)(d) in Class l, Zone 1 or Division 1 locations. All constructions are manufactured with the standard gas/vapor tight continuously corrugated metallic sheath and covered with a jacket of suitable polymeric material. CCW Type ITC-HL cable complies with UL 2225, Standard for Cables and Cable Fittings For Use In Hazardous (Classified) Locations. The CCW sheath provides equipment grounding through the sheath. UL 2225 also includes additional requirements that the cable comply with the -40°C low temperature impact test, more severe room temperature crush and impact tests, and a more severe vertical tray flame test. In addition to all the applications permitted for CCW Type ITC, CCW Type ITC-HL is also permitted in the following additional hazardous (classified) locations: Class I, Division 1 [501.10(A)(1)(d)] Class I, Zone 1 [505.15(B)(1)(c)] Unless otherwise stated, all references refer to the 2011 NEC®. Phone: 888-593-3355 www.generalcable.com CCW Type ITC-HL/PLTC (Instrumentation Tray Cable/ Power-Limited Tray Cable) CCW Type ITC-HL/PLTC is permitted in 727.4 to be used as ITC cable on instrumentation and control circuits operating at 150 volts or less and 5 amperes or less in industrial establishments where the conditions of maintenance and supervision ensure that only qualified persons service the installation: • In cable trays • In raceways • In the following hazardous (classified) locations: Class I, Division 2 [501.10(B)(1), (3) and (4)] Class I, Zone 2 [505.15(C)(1)(c) and (d)] Class II, Division 2 [502.10(B)(1), (4) and (5)] Intrinsically Safe Circuits [504.20] Zone 22 [506.15(C)(4) and (5)] [Not included in UL 2225] Commercial garages [511.7] • As aerial cable on a messenger • Direct buried • Under raised floors in rooms containing industrial process control equipment and rack rooms • Under raised floors in information technology equipment rooms – see Table 645.5. Refer to Article 727 for complete wiring methods, installation requirements, and listing requirements for CCW Type ITCHL cables. SPEC A001 July, 2011 CCW Installation Manual ® CCW Type ITC-HL/PLTC is permitted in 725.133 to be used as PLTC cable on Class 2 and Class 3 remote-control, signaling, and power-limited circuits: • As exposed runs “ER” • In cable trays • In raceways • In the following hazardous (classified) locations: Class I, Zone 2 [505.15(C)(1)(d)] Class II, Division 2 [502.10(B)(1) and (4)] Intrinsically Safe Circuits [504.20] Zone 22 [506.15(C)(4)] [Not included in UL 2225] Commercial garages [511.7] • As aerial cable on a messenger • Direct buried • Under raised floors in information technology equipment rooms – see Table 645.5 Refer to Parts III and IV of NEC 725 for complete wiring methods, installation requirements, and listing requirements for CCW Type PLTC cables. CCW Is The Perfect Cable For PWM Variable Frequency Drive Cables As a function of its construction, CCW has been recognized for its ability to reduce the amount of stray harmonic currents generated by Pulse Width Modulated (PWM) variable frequency drives. Through the use of split ground configurations and the overall shield with CCW’s corrugated, continuously welded aluminum sheath, this cable design is one of the preferred choices of the world’s manufacturers of drives and motors to reduce EMI, RFI, and destructive harmonic currents. CCW cables provide high attenuation shielding for control, signal, and instrumentation circuits and a symmetrical low impedance path to ground. The CCW sheath effectively reduces crosstalk, common mode currents, motor frame voltage, and injected ground currents. These are all important considerations for PWM ac drive applications. CCW Offshore And Shipboard Cables Certified By ABS CCW cables are certified by the American Bureau of Shipping (ABS) as cables listed as CWCMC. This listing means that CCW cables may be used in MODUs (Mobile Offshore Drilling Units), Fixed Production Platforms, Floating Production Platforms, and FPSOs (Floating Production, Storage and Offloading) requiring MC or MCHL (Hazardous Locations). These cable constructions meet UL 1309, Standards For Marine Shipboard Cable and UL 2225, Standard For Cables and Cable Fittings For Use In Hazardous (Classified) Locations. CCW Is An Economical Factory Assembled Wiring System CCW is a factory-assembled wiring system that eliminates the cost of installing raceways and the possibility of damaging the insulated conductors during installation in raceways or cable trays. Since CCW is manufactured in long, continuous lengths and supplied on reels, scrap is significantly reduced. Since CCW Type MC cables are approved for exposed runs, they offer a very economical wiring system. A cable tray or other supports can be used when there are multiple cables in the same run, and then individual cables can branch off as exposed runs from the tray or support to the termination, as required, without any change or splices in the cable. CCW Is Easy To Install CCW can be installed using normal installation equipment and established installation techniques. It is pliable and can be easily installed in long lengths in cable trays, on ladders or other supports. As with any wiring method, care should be taken not to exceed the maximum pulling tension, minimum bending radius, or maximum sidewall pressure. A complete cable installation manual for all cables and conductors is available from General Cable. The minimum bending radius for a multiconductor cable is seven times (7x) the external diameter of the metallic sheath. CCW cable is easily terminated, and sheath removal instructions are included in this catalog. Termination kits and splicing kits are available from numerous manufacturers. CCW Provides Environmental Protection The welded and corrugated metallic sheath on CCW is impervious to vapors, gases or liquids and provides a clean, dry environment for the conductors. This permits the conductors to be rated at 90°C up to 2400 V and 105°C for medium-voltage cables in both wet and dry installations. The standard jacket over the CCW sheath is lowtemperature, sunlight-resistant Polyvinyl Chloride (PVC). Other jacketed or unjacketed cables are available for specific installation or environmental conditions. Consult your General Cable representative for further details. Unless otherwise stated, all references refer to the 2011 NEC®. Phone: 888-593-3355 www.generalcable.com SPEC A001 July, 2011 CCW Installation Manual ® CCW Cables Provide Excellent Flame Resistance CCW cables, with or without a PVC jacket, comply with all current flame test standards, including UL 1569, IEEE 1202, IEEE 383, CSA FT4, ICEA T-29-520 (210,000 BTU/hr) and IEC 60332.3 Cat A. CCW Sheath Permitted As An Equipment Grounding Conductor The sheath on CCW is actually a hollow aluminum tube that provides a crosssectional area that meets or exceeds the equipment grounding conductor requirements specified in 250.122 in all constructions. Spec F125 provides the equivalent conductor size for each CCW aluminum sheath diameter. Even though the metallic sheath provides an equipment grounding conductor that equals or exceeds the NEC requirements, an additional copper equipment grounding conductor is provided in all constructions listed MCHL to comply with the user’s preference not to rely completely on the metallic sheath for grounding power cables. The additional equipment grounding conductor provides an added benefit of being able to parallel two standard power cables and still comply with the grounding requirements of 250.122(F). In many cases, three standard power cables can be run in parallel, but you should check with the manufacturer for this type of installation. CCW Sheath Recognized As A Voltage Separation Barrier The CCW aluminum sheath is recognized as a solid fixed barrier when used on Type MV or MC cables installed in cable tray with cables rated 600 volts or less in accordance with 392.20(B). Installation CCW Installation Tips Some specific guidelines for installing CCW cables are listed below. While it is rarely done, CCW can be installed in a raceway. One application is when a run of CCW Type MC is installed in a non-hazardous or Class I, Division 2 hazardous location and one end of the cable is to be terminated in a Class I, Division 1 hazardous location. The CCW cable may be pulled into a raceway approved for use in Class I, Division 1 hazardous locations, provided the sealing requirements at the Division 1 and 2 boundaries are met. This provides a lower cost total cable run and eliminates splicing of the CCW at the Division boundary. Another instance would be to install the CCW in a raceway to provide additional mechanical protection to prevent physical damage to the cable. • When pulling CCW cables into position, the pulling tension must be on the conductors rather than the aluminum sheath. The pulling eyes/bolts or basket grip should be attached to the conductors and the metallic sheath fastened to the insulated conductors or the pulling rope to prevent movement of the conductors within the CCW sheath. If movement of the conductors within the CCW sheath is noted at the start of a pull, one method to stop the movement is to drive three or four nails about 2 in. apart through the CCW sheath into each copper power conductor. • The minimum bending radius of seven times (7x) the external diameter of the metallic sheath for nonshielded multiconductor cables must be maintained during pulling. Roller assemblies must provide a smooth, regular bending radius for the cable. Using smaller rollers can damage the aluminum sheath and the cable. • Sidewall pressure should not exceed 500 lbs/ft of radius to avoid flattening the CCW sheath or damaging the conductors. • Anti-short bushings are not required on CCW Type MC cables. The listed termination fittings are designed such that the throat of the fitting is constructed to permit the conductors to pass through but not permit the cut end of the sheath to contact the insulated conductors. • Termination kits and splicing kits are available from numerous manufacturers. Refer to the General Cable Installation Manual for Power and Control Cables for more detailed installation instructions. For special installations, such as long vertical risers, contact General Cable for engineering assistance. Unless otherwise stated, all references refer to the 2011 NEC®. Phone: 888-593-3355 www.generalcable.com On very long runs, the higher ampacity permitted for 90°C conductors may be utilized for the CCW cable and 10-foot lengths of a larger conductor that complies with the ampacity limitations required for the 60°C or 75°C termination rating, to be spliced onto the cable conductors at the termination. The 10 feet of the larger conductor will act as a heat sink and ensure that the rated temperature of the termination is not exceeded while permitting smaller 90°C rated conductors to be used for the majority of the run. The same installation technique can also be used for 105°C conductors in CCW Type MV or MC cable. CCW cable terminated directly on busbars is permitted to use the 90°C or 105°C ampacity, as applicable. In long vertical runs as exposed run or in cable tray, CCW cables containing conductors 4 AWG and larger can comply with Table 300.19(A) by having horizontal offsets at the required distances. For installation assistance on cables smaller than 4 AWG installed in long vertical runs, contact General Cable Engineering. SPEC A001 February, 2011 CCW Sheath Removal Instructions ® The following procedures provide a simple, safe means of removing the non-metallic jacket and the corrugated, continuously welded (CCW) aluminum sheath from Type MC cable for terminating or splicing without damaging the insulated conductors. These procedures are not recommended for use on TECK 90, HVTECK or interlocked armor MC. Tool Kit: • Kett-Tool Metal-Clad Cable Saw • 2"/44 teeth Cutting Blades • Cable Saw Spindle and Allen Wrenches • MC Cable Guide • Tubing and Pipe Cutter • 12" V-Jaw Channel-Lock Pliers • 10" Hacksaw Frame • 10"/24 teeth/in. Hacksaw Blades • 10 ft. Tape Measure • Utility Knife with Blades • 5/16" Screwdriver • Tool Box Step 1: Using the utility knife, remove the jacket to expose the required length of unarmored cable within the enclosure. Safe working practices should be observed, including safety glasses and adequate work gloves. Cable installers should be properly trained in cable termination procedures. Installation Note 1: Work Prior to Removing Sheath Measure twice, cut once. Ensure that the pull of cable, in addition to the termination used, and the amount of cable required are adequate for the installation. Make sure that you have the correct size and style glands to properly marry the cable to the equipment. Step 2: Refer to the instructions of the gland manufacturer for the length of aluminum sheath required to be exposed beyond the jacket for fitting the glands to the sheath. Mark the sheath at the nearest crown (high point). This is the Cutting Point. Phone: 888-593-3355 www.generalcable.com SPEC A001 February, 2011 CCW Sheath Removal Instructions ® Installation Note 2: Review Sheath Outside Diameters For diameters less than or equal to 1.625", use Steps 3-9. For diameters greater than 1.625", use Steps 10-15. For Small-Diameter CCW® Cable (diameter of sheath less than or equal to 1.625") Step 3: Using a hacksaw blade or tubing cutter, score the CCW aluminum sheath around the entire sheath at the Cutting Point. Gripping the cable with a hand on either side of the Cutting Point, flex the cable until the metal opens. Carefully remove the freed armored sheath from the end of the cable, being careful not to score or damage the cabled core. Installation Note 3: Using the Kett Model KS-226 Cable Saw When using the cable saw, it is important to read and understand the manufacturer’s instructions and to be familiar with the Kett Cable Saw cutting equipment prior to operating. Step 4: Step 5: For CCW cables with an inner jacket or tight-fitting sheath, it may be necessary to use the Kett-Tool MetalClad Cable Saw with the optional red cable guide. Attach the cable guide to the Kett Cable Saw and secure the cable. Now that your cross-cut is complete, sheath removal via the Kett-Tool Metal-Clad Cable Saw must be done longitudinally down the cable sheath. Step 6: When setting up to cut CCW cable, the cable saw blade must be placed to cut perpendicular to the cable along the cable. See below: CORRECT NOT CORRECT Depth of the saw blade and use of the guides are critical to the proper cutting operation. Do not cut through the entire sheath, as damage to the core is likely. It is suggested that the saw depth be adjusted so that 8095% of the metal in the valley (low point) of the CCW® sheath is cut. Phone: 888-593-3355 www.generalcable.com SPEC A001 February, 2011 CCW Sheath Removal Instructions ® Step 7: With downward pressure being applied to the Kett Cable Saw, make a longitudinal cut down the length of the sheath to be stripped (from the cut end) to the end you hacksawed earlier. Do not attempt to use the cable saw to plunge cut, as this could result in injury. Step 8: Insert the wide flat-head screwdriver into the cut at the free end and twist. This will cause the remaining metal in the valleys to break. Repeat until the sheath completely separates from the core. Step 9: Remove the cable fillers and marker tape from the cabled core, separating the conductors and the equipment grounding conductor(s) for ease in termination. Install the appropriate gland suited to the application per the manufacturer’s instructions. The cable is now ready to be terminated into the enclosure. Phone: 888-593-3355 www.generalcable.com SPEC A001 February, 2011 CCW Sheath Removal Instructions ® For Large-Diameter CCW® Cable (diameter of sheath greater than 1.625") Step 10: Using a hacksaw with the appropriate blade for cutting metal, cut through the crown (high point) of the CCW sheath at your marked Cutting Point to connect the valley (low point) of the CCW sheath. Once this cut is made, mark the sheath around the balance of the cable, making additional cuts for a completed circle. If you cannot complete the circle entirely through cutting, then flex the cable end until the metal separates as shown at the far right. Step 11: Now that your cross-cut is complete, sheath removal via the Kett-Tool Metal-Clad Cable Saw must be done longitudinally down the cable sheath. Step 12: When setting up to cut CCW cable, the cable saw blade must be placed to cut perpendicular to the cable along the cable. See below: CORRECT NOT CORRECT Depth of the saw blade and use of the guides are critical to the proper cutting operation. Do not cut through the entire sheath, as damage to the core is likely. It is suggested that the saw depth be adjusted so that 80-95% of the metal in the valley (low point) of the CCW® sheath is cut. Step 13: With downward pressure being applied to the Kett Cable Saw, make a longitudinal cut down the length of the sheath to be stripped (from the cut end) to the end you hacksawed earlier. Do not attempt to use the cable saw to plunge cut, as this could result in injury. At this point, you should have a completed cut with noticeable connections in the valleys of the sheath. Phone: 888-593-3355 www.generalcable.com SPEC A001 February, 2011 CCW Sheath Removal Instructions ® Step 14: Insert the wide flat-head screwdriver into the cut at the free end and twist. This will cause the remaining metal in the valleys to break. Repeat until the sheath completely separates from the core. Step 15: Remove the cable fillers and marker tape from the cabled core, separating the conductors and grounds/shields for ease in termination. Install the appropriate fitting/gland suited to the application per the manufacturer’s instructions. The cable is now ready to be terminated into the enclosure. Areas with a high propensity for ignitable environments, including presence of liquids, gases or dust. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® Thermocouple Extension NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED THERMOCOUPLE EXTENSION, SINGLE PAIR, OVERALL SHIELD 9025.16010001 16 AWG TYPE EX 0.45 11.4 0.56 14.2 TMCX165 A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 9025.16010002 16 AWG TYPE JX 0.45 11.4 0.56 14.2 TMCX165 A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 9025.16010003 16 AWG TYPE KX 0.45 11.4 0.56 14.2 TMCX165 A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 9025.16010004 16 AWG TYPE TX 0.45 11.4 0.56 14.2 TMCX165 A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 CCW® ARMORED THERMOCOUPLE EXTENSION, PAIRS, OVERALL SHIELD 9050.20041221 20 AWG TYPE EX 4 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9050.20041222 20 AWG TYPE JX 4 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9050.20041223 20 AWG TYPE KX 4 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9050.20041224 20 AWG TYPE TX 4 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9050.20081221 20 AWG TYPE EX 8 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9050.20081222 20 AWG TYPE JX 8 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9050.20081223 20 AWG TYPE KX 8 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9050.20081224 20 AWG TYPE TX 8 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9050.20101221 20 AWG TYPE EX 10 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9050.20101222 20 AWG TYPE JX 10 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9050.20101223 20 AWG TYPE KX 10 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9050.20101224 20 AWG TYPE TX 10 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 CMCXAB075 9050.20121221 20 AWG TYPE EX 12 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 9050.20121222 20 AWG TYPE JX 12 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9050.20121223 20 AWG TYPE KX 12 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9050.20121224 20 AWG TYPE TX 12 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9050.20161221 20 AWG TYPE EX 16 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9050.20161222 20 AWG TYPE JX 16 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9050.20161223 20 AWG TYPE KX 16 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9050.20161224 20 AWG TYPE TX 16 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9050.20201221 20 AWG TYPE EX 20 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9050.20201222 20 AWG TYPE JX 20 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9050.20201223 20 AWG TYPE KX 20 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 CMCXAB075 or CMCXAC100 9050.20201224 20 AWG TYPE TX 20 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 9050.20241221 20 AWG TYPE EX 24 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9050.20241222 20 AWG TYPE JX 24 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9050.20241223 20 AWG TYPE KX 24 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9050.20241224 20 AWG TYPE TX 24 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9050.20361221 20 AWG TYPE EX 36 PAIRS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 9050.20361222 20 AWG TYPE JX 36 PAIRS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 9050.20361223 20 AWG TYPE KX 36 PAIRS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 9050.20361224 20 AWG TYPE TX 36 PAIRS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 9050.20501221 20 AWG TYPE EX 50 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9050.20501222 20 AWG TYPE JX 50 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9050.20501223 20 AWG TYPE KX 50 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9050.20501224 20 AWG TYPE TX 50 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® Thermocouple Extension CCW PART NUMBER NOMINAL ARMOR O.D. PRODUCT DETAIL INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED THERMOCOUPLE EXTENSION, PAIRS, INDIVIDUAL AND OVERALL SHIELD 9075.20041221 20 AWG TYPE EX 4 PAIRS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9075.20041222 20 AWG TYPE JX 4 PAIRS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9075.20041223 20 AWG TYPE KX 4 PAIRS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9075.20041224 20 AWG TYPE TX 4 PAIRS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9075.20081221 20 AWG TYPE EX 8 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9075.20081222 20 AWG TYPE JX 8 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 CMCXAB075 9075.20081223 20 AWG TYPE KX 8 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 9075.20081224 20 AWG TYPE TX 8 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9075.20101221 20 AWG TYPE EX 10 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9075.20101222 20 AWG TYPE JX 10 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9075.20101223 20 AWG TYPE KX 10 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9075.20121222 20 AWG TYPE JX 12 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9075.20121223 20 AWG TYPE KX 12 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9075.20121224 20 AWG TYPE TX 12 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9075.20161221 20 AWG TYPE EX 16 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9075.20161222 20 AWG TYPE JX 16 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9075.20161223 20 AWG TYPE KX 16 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 CMCXAB075 or CMCXAC100 9075.20161224 20 AWG TYPE TX 16 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 9075.20201221 20 AWG TYPE EX 20 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9075.20201222 20 AWG TYPE JX 20 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9075.20201223 20 AWG TYPE KX 20 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9075.20201224 20 AWG TYPE TX 20 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9075.20241221 20 AWG TYPE EX 24 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9075.20241222 20 AWG TYPE JX 24 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9075.20241223 20 AWG TYPE KX 24 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9075.20241224 20 AWG TYPE TX 24 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9075.20361221 20 AWG TYPE EX 36 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9075.20361222 20 AWG TYPE JX 36 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9075.20361223 20 AWG TYPE KX 36 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9075.20361224 20 AWG TYPE TX 36 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9075.20501221 20 AWG TYPE EX 50 PAIRS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 CMCXAC2125 or CMCXAD200 9075.20501222 20 AWG TYPE JX 50 PAIRS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 CMCXAC2125 or CMCXAD200 9075.20501223 20 AWG TYPE KX 50 PAIRS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 CMCXAC2125 or CMCXAD200 9075.20501224 20 AWG TYPE TX 50 PAIRS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 CMCXAC2125 or CMCXAD200 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® Instrumentation - 300 V NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, OVERALL SHIELD 9125.16010001 16 AWG 7W (1.31 mm²) 1 PAIR 0.43 10.9 0.54 13.7 - A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-008 CMCXAA050 9125.16010002 16 AWG 7W (1.31 mm²) 1 TRIAD 0.49 12.4 0.60 15.2 TMCX165 A or B TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 or CMCXAB075 9125.16021201 16 AWG 7W (1.31 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9125.16021202 16 AWG 7W (1.31 mm²) 2 TRIADS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9125.16041201 16 AWG 7W (1.31 mm²) 4 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9125.16041202 16 AWG 7W (1.31 mm²) 4 TRIADS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9125.16081201 16 AWG 7W (1.31 mm²) 8 PAIRS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9125.16081202 16 AWG 7W (1.31 mm²) 8 TRIADS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9125.16121201 16 AWG 7W (1.31 mm²) 12 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9125.16121202 16 AWG 7W (1.31 mm²) 12 TRIADS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9125.16161201 16 AWG 7W (1.31 mm²) 16 PAIRS 1.11 28.2 1.22 31.0 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9125.16161202 16 AWG 7W (1.31 mm²) 16 TRIADS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9125.16241201 16 AWG 7W (1.31 mm²) 24 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9125.16241202 16 AWG 7W (1.31 mm²) 24 TRIADS 1.42 36.1 1.53 38.9 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 CMCXAC2125 or CMCXAD200 9125.16361201 16 AWG 7W (1.31 mm²) 36 PAIRS 1.56 39.6 1.69 42.9 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 9125.16361202 16 AWG 7W (1.31 mm²) 36 TRIADS 1.64 41.7 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9125.16501201 16 AWG 7W (1.31 mm²) 50 PAIRS 1.83 46.5 1.96 49.8 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-180 CMCXAD200 or CMCXAE250 9125.16501202 16 AWG 7W (1.31 mm²) 50 TRIADS 1.92 48.8 2.05 52.1 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, INDIVIDUAL AND OVERALL SHIELD 9150.16021201 16 AWG 7W (1.31 mm²) 2 PAIRS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9150.16021202 16 AWG 7W (1.31 mm²) 2 TRIADS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9150.16041201 16 AWG 7W (1.31 mm²) 4 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9150.16041202 16 AWG 7W (1.31 mm²) 4 TRIADS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 CMCXAB075 or CMCXAC100 9150.16081201 16 AWG 7W (1.31 mm²) 8 PAIRS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 9150.16081202 16 AWG 7W (1.31 mm²) 8 TRIADS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9150.16121201 16 AWG 7W (1.31 mm²) 12 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9150.16121202 16 AWG 7W (1.31 mm²) 12 TRIADS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9150.16241201 16 AWG 7W (1.31 mm²) 24 PAIRS 1.42 36.1 1.53 38.9 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 CMCXAD200 9150.16241202 16 AWG 7W (1.31 mm²) 24 TRIADS 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 9150.16361201 16 AWG 7W (1.31 mm²) 36 PAIRS 1.64 41.7 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9150.16361202 16 AWG 7W (1.31 mm²) 36 TRIADS 1.87 47.5 2.00 50.8 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAD200 or CMCXAE250 TMCX250SSS* 4-250-220 CMCXAE250 9150.16501201 16 AWG 7W (1.31 mm²) 50 PAIRS 1.96 49.8 2.09 53.1 TMCX6206 or TMCX7247 D or E 9150.16501202 16 AWG 7W (1.31 mm²) 50 TRIADS 2.19 55.6 2.32 58.9 TMCX7247 E TMCX250SA* TMCX250SNB* CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, OVERALL SHIELD 9225.16010001 16 AWG 7W (1.31 mm²) 1 PAIR 0.43 10.9 0.54 13.7 - A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-008 CMCXAA050 9225.16010002 16 AWG 7W (1.31 mm²) 1 TRIAD 0.43 10.9 0.54 13.7 - A TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-008 CMCXAA050 CMCXAA050 or CMCXAB075 9225.16021221 16 AWG 7W (1.31 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 9225.16041221 16 AWG 7W (1.31 mm²) 4 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9225.16041222 16 AWG 7W (1.31 mm²) 4 TRIADS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 CMCXAB075 9225.16061221 16 AWG 7W (1.31 mm²) 6 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 9225.16081221 16 AWG 7W (1.31 mm²) 8 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9225.16081222 16 AWG 7W (1.31 mm²) 8 TRIADS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9225.16101221 16 AWG 7W (1.31 mm²) 10 PAIRS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9225.16121221 16 AWG 7W (1.31 mm²) 12 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9225.16121222 16 AWG 7W (1.31 mm²) 12 TRIADS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9225.16161221 16 AWG 7W (1.31 mm²) 16 PAIRS 1.11 28.2 1.22 31.0 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9225.16161222 16 AWG 7W (1.31 mm²) 16 TRIADS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® Instrumentation - 300 V CCW PART NUMBER NOMINAL ARMOR O.D. PRODUCT DETAIL INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, OVERALL SHIELD (cont’d) 9225.16201221 16 AWG 7W (1.31 mm²) 20 PAIRS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9225.16241221 16 AWG 7W (1.31 mm²) 24 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9225.16241222 16 AWG 7W (1.31 mm²) 24 TRIADS 1.42 36.1 1.53 38.9 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 9225.16361221 16 AWG 7W (1.31 mm²) 36 PAIRS 1.51 38.4 1.65 41.9 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 CMCXAC2125 or CMCXAD200 9225.16361222 16 AWG 7W (1.31 mm²) 36 TRIADS 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9225.16501221 16 AWG 7W (1.31 mm²) 50 PAIRS 1.64 41.7 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 CMCXAA050 or CMCXAB075 9225.18021221 18 AWG 7W (0.82 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 9225.18041221 18 AWG 7W (0.82 mm²) 2 PAIRS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9225.18041222 18 AWG 7W (0.82 mm²) 2 TRIADS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9225.18061221 18 AWG 7W (0.82 mm²) 6 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9225.18081221 18 AWG 7W (0.82 mm²) 8 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9225.18081222 18 AWG 7W (0.82 mm²) 8 TRIADS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9225.18101221 18 AWG 7W (0.82 mm²) 10 PAIRS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9225.18121221 18 AWG 7W (0.82 mm²) 12 PAIRS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9225.18121222 18 AWG 7W (0.82 mm²) 12 TRAIDS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9225.18161221 18 AWG 7W (0.82 mm²) 16 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9225.18161222 18 AWG 7W (0.82 mm²) 16 TRIADS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 CMCXAC100 9225.18201221 18 AWG 7W (0.82 mm²) 20 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 9225.18241221 18 AWG 7W (0.82 mm²) 24 PAIRS 1.11 28.2 1.22 31.0 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9225.18241222 18 AWG 7W (0.82 mm²) 24 TRIADS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9225.18361221 18 AWG 7W (0.82 mm²) 36 PAIRS 1.29 32.8 1.40 35.6 TMCX4140 or TMCX5161 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-120 CMCXAC2125 9225.18361222 18 AWG 7W (0.82 mm²) 36 TRIADS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 CMCXAC2125 or CMCXAD200 9225.18501221 18 AWG 7W (0.82 mm²) 50 PAIRS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 9225.20021221 20 AWG 7W (0.52 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9225.20041221 20 AWG 7W (0.52 mm²) 4 PAIRS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9225.20041222 20 AWG 7W (0.52 mm²) 4 TRIADS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9225.20061221 20 AWG 7W (0.52 mm²) 6 PAIRS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 CMCXAB075 9225.20081221 20 AWG 7W (0.52 mm²) 8 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 9225.20081222 20 AWG 7W (0.52 mm²) 8 TRIADS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9225.20101221 20 AWG 7W (0.52 mm²) 10 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9225.20121221 20 AWG 7W (0.52 mm²) 12 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9225.20121222 20 AWG 7W (0.52 mm²) 12 TRIADS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9225.20161221 20 AWG 7W (0.52 mm²) 16 PAIRS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9225.20161222 20 AWG 7W (0.52 mm²) 16 TRIADS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 CMCXAB075 or CMCXAC100 9225.20201221 20 AWG 7W (0.52 mm²) 20 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 9225.20241221 20 AWG 7W (0.52 mm²) 24 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9225.20241222 20 AWG 7W (0.52 mm²) 24 TRIADS 1.11 28.2 1.22 31.0 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 CMCXAC2125 9225.20361221 20 AWG 7W (0.52 mm²) 36 PAIRS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 9225.20361222 20 AWG 7W (0.52 mm²) 36 TRIADS 1.29 32.8 1.40 35.6 TMCX4140 or TMCX5161 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-120 CMCXAC2125 9225.20501221 20 AWG 7W (0.52 mm²) 50 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, INDIVIDUAL AND OVERALL SHIELD 9250.16021221 16 AWG 7W (1.31 mm²) 2 PAIRS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9250.16041221 16 AWG 7W (1.31 mm²) 4 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9250.16041222 16 AWG 7W (1.31 mm²) 4 TRIADS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9250.16061221 16 AWG 7W (1.31 mm²) 6 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9250.16081221 16 AWG 7W (1.31 mm²) 8 PAIRS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9250.16081222 16 AWG 7W (1.31 mm²) 8 TRIADS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® Instrumentation - 300 V NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, INDIVIDUAL AND OVERALL SHIELD (cont’d) 9250.16101221 16 AWG 7W (1.31 mm²) 10 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9250.16121221 16 AWG 7W (1.31 mm²) 12 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 CMCXAC100 or CMCXAC2125 9250.16121222 16 AWG 7W (1.31 mm²) 12 TRIADS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 9250.16161221 16 AWG 7W (1.31 mm²) 16 PAIRS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9250.16161222 16 AWG 7W (1.31 mm²) 16 TRIADS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9250.16201221 16 AWG 7W (1.31 mm²) 20 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9250.16241221 16 AWG 7W (1.31 mm²) 24 PAIRS 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9250.16241222 16 AWG 7W (1.31 mm²) 24 TRIADS 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9250.16361221 16 AWG 7W (1.31 mm²) 36 PAIRS 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9250.16361222 16 AWG 7W (1.31 mm²) 36 TRIADS 1.83 46.5 1.96 49.8 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-180 CMCXAD200 or CMCXAE250 9250.16501221 16 AWG 7W (1.31 mm²) 50 PAIRS 1.87 47.5 2.00 50.8 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 CMCXAA050 or CMCXAB075 9250.18021221 18 AWG 7W (0.82 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 9250.18041221 18 AWG 7W (0.82 mm²) 4 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9250.18041222 18 AWG 7W (0.82 mm²) 4 TRIADS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9250.18061221 18 AWG 7W (0.82 mm²) 6 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9250.18081221 18 AWG 7W (0.82 mm²) 8 PAIRS 0.80 20.3 0.92 23.4 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9250.18081222 18 AWG 7W (0.82 mm²) 8 TRIADS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9250.18101221 18 AWG 7W (0.82 mm²) 10 PAIRS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9250.18121221 18 AWG 7W (0.82 mm²) 12 PAIRS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9250.18121222 18 AWG 7W (0.82 mm²) 12 TRIADS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9250.18161221 18 AWG 7W (0.82 mm²) 16 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9250.18161222 18 AWG 7W (0.82 mm²) 16 TRIADS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9250.18201221 18 AWG 7W (0.82 mm²) 20 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9250.18241221 18 AWG 7W (0.82 mm²) 24 PAIRS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9250.18241222 18 AWG 7W (0.82 mm²) 24 TRIADS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 CMCXAC2125 or CMCXAD200 9250.18361221 18 AWG 7W (0.82 mm²) 36 PAIRS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 9250.18361222 18 AWG 7W (0.82 mm²) 36 TRIADS 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9250.18501221 18 AWG 7W (0.82 mm²) 50 PAIRS 1.69 42.9 1.82 46.2 TMCX6206 D TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 CMCXAD200 9250.20021221 20 AWG 7W (0.52 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9250.20041221 20 AWG 7W (0.52 mm²) 4 PAIRS 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9250.20041222 20 AWG 7W (0.52 mm²) 4 TRIADS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9250.20061221 20 AWG 7W (0.52 mm²) 6 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9250.20081221 20 AWG 7W (0.52 mm²) 8 PAIRS 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9250.20081222 20 AWG 7W (0.52 mm²) 8 TRIADS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9250.20101221 20 AWG 7W (0.52 mm²) 10 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9250.20121221 20 AWG 7W (0.52 mm²) 12 PAIRS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9250.20121222 20 AWG 7W (0.52 mm²) 12 TRIADS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9250.20161221 20 AWG 7W (0.52 mm²) 16 PAIRS 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9250.20161222 20 AWG 7W (0.52 mm²) 16 TRIADS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9250.20201221 20 AWG 7W (0.52 mm²) 20 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9250.20241221 20 AWG 7W (0.52 mm²) 24 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9250.20241222 20 AWG 7W (0.52 mm²) 24 TRIADS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9250.20361221 20 AWG 7W (0.52 mm²) 36 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9250.20361222 20 AWG 7W (0.52 mm²) 36 TRIADS 1.42 36.1 1.53 38.9 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 9250.20501221 20 AWG 7W (0.52 mm²) 50 PAIRS 1.51 38.4 1.65 41.9 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 CMCXAC2125 or CMCXAD200 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® Instrumentation - 600 V CCW PART NUMBER NOMINAL ARMOR O.D. PRODUCT DETAIL INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, OVERALL SHIELD 9325.16010001 16 AWG 7W (1.31 mm²) 1 PAIR 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9325.16010002 16 AWG 7W (1.31 mm²) 1 TRIAD 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9325.16020001 16 AWG 7W (1.31 mm²) 2 PAIRS 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9325.16040001 16 AWG 7W (1.31 mm²) 4 PAIRS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9325.16040002 16 AWG 7W (1.31 mm²) 4 TRIADS 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9325.16060001 16 AWG 7W (1.31 mm²) 6 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9325.16080001 16 AWG 7W (1.31 mm²) 8 PAIRS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9325.16080002 16 AWG 7W (1.31 mm²) 8 TRIADS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9325.16100001 16 AWG 7W (1.31 mm²) 10 PAIRS 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9325.16120001 16 AWG 7W (1.31 mm²) 12 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9325.16120002 16 AWG 7W (1.31 mm²) 12 TRIADS 1.11 28.2 1.22 31.0 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9325.16160001 16 AWG 7W (1.31 mm²) 16 PAIRS 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9325.16160002 16 AWG 7W (1.31 mm²) 16 TRIADS 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 9325.16200001 16 AWG 7W (1.31 mm²) 20 PAIRS 1.29 32.8 1.40 35.6 TMCX4140 or TMCX5161 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-120 CMCXAC2125 9325.16240001 16 AWG 7W (1.31 mm²) 24 PAIRS 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9325.16240002 16 AWG 7W (1.31 mm²) 24 TRIADS 1.47 37.3 1.58 40.1 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 CMCXAC2125 or CMCXAD200 9325.16360001 16 AWG 7W (1.31 mm²) 36 PAIRS 1.64 41.7 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9325.16360002 16 AWG 7W (1.31 mm²) 36 TRIADS 1.74 44.2 1.87 47.5 TMCX6206 D TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 CMCXAD200 9325.16500001 16 AWG 7W (1.31 mm²) 50 PAIRS 1.83 46.5 1.96 49.8 TMCX6206 D or E 4-200-180 CMCXAD200 or CMCXAE250 CMCXAA050 or CMCXAB075 TMCX200A TMCX200NB TMCX200SS 9325.18020001 18 AWG 7W (0.82 mm²) 2 PAIRS 0.59 15.0 0.70 17.8 TMCX165 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 9325.18040001 18 AWG 7W (0.82 mm²) 4 PAIRS 0.65 16.5 0.75 19.1 TMCX165 or TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAB075 9325.18080001 18 AWG 7W (0.82 mm²) 8 PAIRS 0.82 20.8 0.92 23.4 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 CMCXAC100 9325.18120001 18 AWG 7W (0.82 mm²) 12 PAIRS 1.00 25.4 1.10 27.9 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 9325.18160001 18 AWG 7W (0.82 mm²) 16 PAIRS 1.12 28.4 1.23 31.2 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9325.18240001 18 AWG 7W (0.82 mm²) 24 PAIRS 1.39 35.3 1.49 37.8 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9350.16020001 16 AWG 7W (1.31 mm²) 2 PAIRS 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9350.16040001 16 AWG 7W (1.31 mm²) 4 PAIRS 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9350.16040002 16 AWG 7W (1.31 mm²) 4 TRIADS 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9350.16060001 16 AWG 7W (1.31 mm²) 6 PAIRS 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9350.16080001 16 AWG 7W (1.31 mm²) 8 PAIRS 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9350.16080002 16 AWG 7W (1.31 mm²) 8 TRIADS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9350.16100001 16 AWG 7W (1.31 mm²) 10 PAIRS 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9350.16120001 16 AWG 7W (1.31 mm²) 12 PAIRS 1.11 28.2 1.22 31.0 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9350.16120002 16 AWG 7W (1.31 mm²) 12 TRIADS 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 CCW® ARMORED INSTRUMENTATION, PAIRS/TRIADS, INDIVIDUAL AND OVERALL SHIELD 9350.16160001 16 AWG 7W (1.31 mm²) 16 PAIRS 1.29 32.8 1.40 35.6 TMCX4140 or TMCX5161 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-120 CMCXAC2125 9350.16160002 16 AWG 7W (1.31 mm²) 16 TRIADS 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9350.16200001 16 AWG 7W (1.31 mm²) 20 PAIRS 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 9350.16240001 16 AWG 7W (1.31 mm²) 24 PAIRS 1.42 36.1 1.53 38.9 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 CMCXAD200 9350.16240002 16 AWG 7W (1.31 mm²) 24 TRIADS 1.64 41.7 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 9350.16360001 16 AWG 7W (1.31 mm²) 36 PAIRS 1.69 42.9 1.82 46.2 TMCX6206 D TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 CMCXAD200 9350.16360002 16 AWG 7W (1.31 mm²) 36 TRIADS 1.96 49.8 2.09 53.1 TMCX6206 or TMCX7247 D or E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAD200 or CMCXAE250 9350.16500001 16 AWG 7W (1.31 mm²) 50 PAIRS 1.92 48.8 2.05 52.1 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 9350.18020001 18 AWG 7W (0.82 mm²) 2 PAIRS 0.59 15.0 0.70 17.8 TMCX165 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9350.18040001 18 AWG 7W (0.82 mm²) 4 PAIRS 0.65 16.5 0.75 19.1 TMCX165 or TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAB075 9350.18080001 18 AWG 7W (0.82 mm²) 8 PAIRS 0.82 20.8 0.92 23.4 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 CMCXAC100 9350.18120001 18 AWG 7W (0.82 mm²) 12 PAIRS 1.00 25.4 1.10 27.9 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 9350.18160001 18 AWG 7W (0.82 mm²) 16 PAIRS 1.12 28.4 1.23 31.2 TMCX3112 or TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9350.18240001 18 AWG 7W (0.82 mm²) 24 PAIRS 1.39 35.3 1.49 37.8 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL INCHES Control - 600 V mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED CONTROL WITH GREEN INSULATED GROUNDING CONDUCTOR 9500.01002110 10 AWG 7W (5.26 mm²) 2/C W/10 AWG GROUND 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9500.01003110 10 AWG 7W (5.26 mm²) 3/C W/10 AWG GROUND 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9500.01004110 10 AWG 7W (5.26 mm²) 4/C W/10 AWG GROUND 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9500.01006110 10 AWG 7W (5.26 mm²) 6/C W/10 AWG GROUND 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9500.01008110 10 AWG 7W (5.26 mm²) 8/C W/10 AWG GROUND 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9500.01011110 10 AWG 7W (5.26 mm²) 11/C W/10 AWG GROUND 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9500.01202112 12 AWG 7W (3.31 mm²) 2/C W/12 AWG GROUND 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9500.01203112 12 AWG 7W (3.31 mm²) 3/C W/12 AWG GROUND 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9500.01204112 12 AWG 7W (3.31 mm²) 4/C W/12 AWG GROUND 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9500.01205112 12 AWG 7W (3.31 mm²) 5/C W/12 AWG GROUND 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9500.01206112 12 AWG 7W (3.31 mm²) 6/C W/12 AWG GROUND 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9500.01208112 12 AWG 7W (3.31 mm²) 8/C W/12 AWG GROUND 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 CMCXAB075 or CMCXAC100 9500.01211112 12 AWG 7W (3.31 mm²) 11/C W/12 AWG GROUND 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 9500.01218112 12 AWG 7W (3.31 mm²) 18/C W/12 AWG GROUND 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9500.01236112 12 AWG 7W (3.31 mm²) 36/C W/12 AWG GROUND 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9500.01402114 14 AWG 7W (2.08 mm²) 2/C W/14 AWG GROUND 0.49 12.4 0.60 15.2 TMCX165 A or B TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 or CMCXAB075 9500.01403114 14 AWG 7W (2.08 mm²) 3/C W/14 AWG GROUND 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 CMCXAA050 or CMCXAB075 9500.01404114 14 AWG 7W (2.08 mm²) 4/C W/14 AWG GROUND 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 9500.01405114 14 AWG 7W (2.08 mm²) 5/C W/14 AWG GROUND 0.60 15.2 0.71 18.0 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9500.01406114 14 AWG 7W (2.08 mm²) 6/C W/14 AWG GROUND 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9500.01408114 14 AWG 7W (2.08 mm²) 8/C W/14 AWG GROUND 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9500.01411114 14 AWG 7W (2.08 mm²) 11/C W/14 AWG GROUND 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9500.01418114 14 AWG 7W (2.08 mm²) 18/C W/14 AWG GROUND 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9500.01436114 14 AWG 7W (2.08 mm²) 36/C W/14 AWG GROUND 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 Control (Non-HL) - 600 V CCW® ARMORED CONTROL WITHOUT GROUNDING CONDUCTOR 9525.01002000 10 AWG 7W (5.26 mm²) 2/C 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01003000 10 AWG 7W (5.26 mm²) 3/C 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01004000 10 AWG 7W (5.26 mm²) 4/C 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9525.01005000 10 AWG 7W (5.26 mm²) 5/C 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9525.01007000 10 AWG 7W (5.26 mm²) 7/C 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9525.01009000 10 AWG 7W (5.26 mm²) 9/C 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9525.01012000 10 AWG 7W (5.26 mm²) 12/C 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9525.01202000 12 AWG 7W (3.31 mm²) 2/C 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01203000 12 AWG 7W (3.31 mm²) 3/C 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01204000 12 AWG 7W (3.31 mm²) 4/C 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01205000 12 AWG 7W (3.31 mm²) 5/C 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9525.01207000 12 AWG 7W (3.31 mm²) 7/C 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9525.01209000 12 AWG 7W (3.31 mm²) 9/C 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9525.01212000 12 AWG 7W (3.31 mm²) 12/C 0.89 22.6 0.99 25.1 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9525.01219000 12 AWG 7W (3.31 mm²) 19/C 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9525.01237000 12 AWG 7W (3.31 mm²) 37/C 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9525.01402000 14 AWG 7W (2.08 mm²) 2/C 0.49 12.4 0.60 15.2 TMCX165 A or B TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 or CMCXAB075 9525.01403000 14 AWG 7W (2.08 mm²) 3/C 0.49 12.4 0.60 15.2 TMCX165 A or B TMCX050SA* TMCX050SNB* TMCX050SSS* 4-075-010 CMCXAA050 or CMCXAB075 9525.01404000 14 AWG 7W (2.08 mm²) 4/C 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01405000 14 AWG 7W (2.08 mm²) 5/C 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9525.01407000 14 AWG 7W (2.08 mm²) 7/C 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9525.01409000 14 AWG 7W (2.08 mm²) 9/C 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9525.01412000 14 AWG 7W (2.08 mm²) 12/C 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9525.01419000 14 AWG 7W (2.08 mm²) 19/C 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9525.01437000 14 AWG 7W (2.08 mm²) 37/C 1.24 31.5 1.35 34.3 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® CCW PART NUMBER NOMINAL ARMOR O.D. PRODUCT DETAIL Composite Power & Control - 600 V INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE Thomas & Betts 711 Series Aluminum NP Brass Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED COMPOSITE POWER AND CONTROL WITH BARE GROUND 9625.043124108 4 AWG 7W (21.2 mm²) 3/C W/12 AWG 4/C CONTROL & 8 AWG GROUND 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9625.063124108 6 AWG 7W (13.3 mm²) 3/C W/12 AWG 4/C CONTROL & 8 AWG GROUND 0.93 23.6 1.03 26.2 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9625.083124110 8 AWG 7W (8.36 mm²) 3/C W/12 AWG 4/C CONTROL & 10 AWG GROUND 0.89 22.6 0.99 25.1 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9625.103124110 10 AWG 7W (5.26 mm²) 3/C W/12 AWG 4/C CONTROL & 10 AWG GROUND 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 Composite Power & Control (Non-HL) - 600 V CMCXAB075 CCW® ARMORED COMPOSITE POWER AND CONTROL WITHOUT GROUND 9650.023123000 2 AWG 7W (33.6 mm²) 3/C W/12 AWG 3/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.023124000 2 AWG 7W (33.6 mm²) 3/C W/12 AWG 4/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.023143000 2 AWG 7W (33.6 mm²) 3/C W/14 AWG 3/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.023144000 2 AWG 7W (33.6 mm²) 3/C W/14 AWG 4/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.024123000 2 AWG 7W (33.6 mm²) 4/C W/12 AWG 3/C CONTROL 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9650.024124000 2 AWG 7W (33.6 mm²) 4/C W/12 AWG 4/C CONTROL 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9650.024143000 2 AWG 7W (33.6 mm²) 4/C W/14 AWG 3/C CONTROL 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9650.024144000 2 AWG 7W (33.6 mm²) 4/C W/14 AWG 4/C CONTROL 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9650.043123000 4 AWG 7W (21.2 mm²) 3/C W/12 AWG 3/C CONTROL 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9650.043124000 4 AWG 7W (21.2 mm²) 3/C W/12 AWG 4/C CONTROL 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9650.043143000 4 AWG 7W (21.2 mm²) 3/C W/14 AWG 3/C CONTROL 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 TMCX100A 9650.043144000 4 AWG 7W (21.2 mm²) 3/C W/14 AWG 4/C CONTROL 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9650.044123000 4 AWG 7W (21.2 mm²) 4/C W/12 AWG 3/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.044124000 4 AWG 7W (21.2 mm²) 4/C W/12 AWG 4/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.044143000 4 AWG 7W (21.2 mm²) 4/C W/14 AWG 3/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.044144000 4 AWG 7W (21.2 mm²) 4/C W/14 AWG 4/C CONTROL 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9650.063123000 6 AWG 7W (13.3 mm²) 3/C W/12 AWG 3/C CONTROL 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9650.063124000 6 AWG 7W (13.3 mm²) 3/C W/12 AWG 4/C CONTROL 0.93 23.6 1.03 26.2 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9650.063143000 6 AWG 7W (13.3 mm²) 3/C W/14 AWG 3/C CONTROL 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9650.063144000 6 AWG 7W (13.3 mm²) 3/C W/14 AWG 4/C CONTROL 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9650.064123000 6 AWG 7W (13.3 mm²) 4/C W/12 AWG 3/C CONTROL 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9650.064124000 6 AWG 7W (13.3 mm²) 4/C W/12 AWG 4/C CONTROL 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9650.064143000 6 AWG 7W (13.3 mm²) 4/C W/14 AWG 3/C CONTROL 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 TMCX100A 9650.064144000 6 AWG 7W (13.3 mm²) 4/C W/14 AWG 4/C CONTROL 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9650.083123000 8 AWG 7W (8.36 mm²) 3/C W/12 AWG 3/C CONTROL 0.80 20.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.083124000 8 AWG 7W (8.36 mm²) 3/C W/12 AWG 4/C CONTROL 0.84 21.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9650.083143000 8 AWG 7W (8.36 mm²) 3/C W/14 AWG 3/C CONTROL 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.083144000 8 AWG 7W (8.36 mm²) 3/C W/14 AWG 4/C CONTROL 0.84 21.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 9650.084123000 8 AWG 7W (8.36 mm²) 4/C W/12 AWG 3/C CONTROL 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 4-100-070 CMCXAB075 or CMCXAC100 9650.084124000 8 AWG 7W (8.36 mm²) 4/C W/12 AWG 4/C CONTROL 0.93 23.6 1.04 26.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 9650.084143000 8 AWG 7W (8.36 mm²) 4/C W/14 AWG 3/C CONTROL 0.84 21.3 0.95 24.1 TMCX285 or TMCX3112 B TMCX100A TMCX100NB TMCX100SS 4-100-070 9650.084144000 8 AWG 7W (8.36 mm²) 4/C W/14 AWG 4/C CONTROL 0.89 22.6 1.00 25.4 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9650.103123000 10 AWG 7W (5.26 mm²) 3/C W/12 AWG 3/C CONTROL 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9650.103143000 10 AWG 7W (5.26 mm²) 3/C W/14 AWG 3/C CONTROL 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 9650.103144000 10 AWG 7W (5.26 mm²) 3/C W/14 AWG 4/C CONTROL 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.104123000 10 AWG 7W (5.26 mm²) 4/C W/12 AWG 3/C CONTROL 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.104124000 10 AWG 7W (5.26 mm²) 4/C W/12 AWG 4/C CONTROL 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.104143000 10 AWG 7W (5.26 mm²) 4/C W/14 AWG 3/C CONTROL 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.104144000 10 AWG 7W (5.26 mm²) 4/C W/14 AWG 4/C CONTROL 0.80 20.3 0.91 23.1 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9650.123143000 12 AWG 7W (3.31 mm²) 3/C W/14 AWG 3/C CONTROL 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9650.123144000 12 AWG 7W (3.31 mm²) 3/C W/14 AWG 4/C CONTROL 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9650.124143000 12 AWG 7W (3.31 mm²) 4/C W/14 AWG 3/C CONTROL 0.71 18.0 0.82 20.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9650.124144000 12 AWG 7W (3.31 mm²) 4/C W/14 AWG 4/C CONTROL 0.75 19.1 0.86 21.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-100-050 CMCXAB075 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. CMCXAB075 Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL INCHES Power - 600 V mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED POWER, 3/C VFD AND 4/C WITH BARE GROUND 9600.00103310 1 AWG 19W (42.4 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9600.00104106 1 AWG 19W (42.4 mm²) 4/C W/6 AWG 1/C GROUND 1.29 32.8 1.40 35.6 TMCX4140 or TMCX5161 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-120 CMCXAC2125 9600.00203310 2 AWG 7W (33.6 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.02 25.9 1.13 28.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 CMCXAC100 9600.00204106 2 AWG 7W (33.6 mm²) 4/C W/6 AWG 1/C GROUND 1.15 29.2 1.26 32.0 TMCX4140 C TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 9600.00403312 4 AWG 7W (21.2 mm²) 3/C VFD W/12 AWG 3/C GROUND 0.89 22.6 0.99 25.1 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9600.00404108 4 AWG 7W (21.2 mm²) 4/C W/8 AWG 1/C GROUND 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9600.00603312 6 AWG 7W (13.3 mm²) 3/C VFD W/12 AWG 3/C GROUND 0.80 20.3 0.90 22.9 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9600.00604108 6 AWG 7W (13.3 mm²) 4/C W/8 AWG 1/C GROUND 0.89 22.6 0.99 25.1 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9600.00803314 8 AWG 7W (8.36 mm²) 3/C VFD W/14 AWG 3/C GROUND 0.71 18.0 0.81 20.6 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9600.00804110 8 AWG 7W (8.36 mm²) 4/C W/10 AWG 1/C GROUND 0.80 20.3 0.90 22.9 TMCX285 or TMCX3112 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 CMCXAB075 9600.01003314 10 AWG 7W (5.26 mm²) 3/C VFD W/14 AWG 3/C GROUND 0.62 15.7 0.73 18.5 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9600.01004314 10 AWG 7W (5.26 mm²) 4/C W/14 AWG 3/C GROUND 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9600.01203316 12 AWG 7W (3.31 mm²) 3/C VFD W/16 AWG 3/C GROUND 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9600.01204316 12 AWG 7W (3.31 mm²) 4/C W/16 AWG 3/C GROUND 0.67 17.0 0.78 19.8 TMCX285 B TMCX075A TMCX075NB TMCX075SS 4-075-040 CMCXAB075 9600.01403318 14 AWG 7W (2.08 mm²) 3/C VFD W/18 AWG 3/C GROUND 0.53 13.5 0.64 16.3 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9600.01404318 14 AWG 7W (2.08 mm²) 4/C W/18 AWG 3/C GROUND 0.58 14.7 0.69 17.5 TMCX165 A or B TMCX050A* TMCX050NB* TMCX050SS* 4-075-020 CMCXAA050 or CMCXAB075 9600.100031110 1000 KCMIL 61W (507 mm²) 3/C VFD W/1/0 AWG 1/C GROUND 1.24 31.5 1.34 34.0 TMCX4140 C2 TMCX125A* TMCX125NB* TMCX125SS* 4-125-110 CMCXAC2125 9600.100041110 1000 KCMIL 61W (507 mm²) 4/C W/1/0 AWG 1/C GROUND 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9600.11003310 1/0 AWG 19W (53.5 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.34 34.0 1.44 36.6 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 9600.11004106 1/0 AWG 19W (53.5 mm²) 4/C W/6 AWG 1/C GROUND 1.51 38.4 1.64 41.7 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 CMCXAC2125 or CMCXAD200 CMCXAC2125 9600.21003310 2/0 AWG 19W (67.4 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.74 44.2 1.87 47.5 TMCX6206 D TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 CMCXAD200 9600.21004106 2/0 AWG 19W (67.4 mm²) 4/C W/6 AWG 1/C GROUND 1.96 49.8 2.09 53.1 TMCX6206 or TMCX7247 D or E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAD200 or CMCXAE250 9600.25003308 250 KCMIL 37W (127 mm²) 3/C VFD W/8 AWG 3/C GROUND 1.47 37.3 1.59 40.4 TMCX5161 C2 or D TMCX150A* TMCX150NB* TMCX150SS* 4-150-140 CMCXAC2125 or CMCXAD200 9600.25004104 250KCMIL 37W (127 mm²) 4/C W/4 AWG 1/C GROUND 1.65 41.9 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9600.31003308 3/0 AWG 19W (85 mm²) 3/C VFD W/8 AWG 3/C GROUND 1.96 49.8 2.09 53.1 TMCX6206 or TMCX7247 D or E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAD200 or CMCXAE250 9600.31004104 3/0 AWG 19W (85 mm²) 4/C W/4 AWG 1/C GROUND 2.19 55.6 2.35 59.7 TMCX7247 E TMCX250SA* TMCX250SNB* TMCX250SSS* 4-250-220 CMCXAE250 9600.35003307 350 KCMIL 37W (177 mm²) 3/C VFD W/7 AWG 3/C GROUND 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 CMCXAD200 or CMCXAE250 9600.35004103 350 KCMIL 37W (177 mm²) 4/C W/3 AWG 1/C GROUND 1.78 45.2 1.91 48.5 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-180 9600.41003308 4/0 AWG 19W (107 mm²) 3/C VFD W/8 AWG 3/C GROUND 2.28 57.9 2.44 62.0 TMCX7247 E TMCX250A TMCX250NB TMCX250SS 4-250-230 CMCXAE250 9600.41004104 4/0 AWG 19W (107 mm²) 4/C W/4 AWG 1/C GROUND 2.49 63.2 2.65 67.3 TMCX8302 E or F TMCX250A* TMCX250NB* TMCX250SS* 4-300-240 CMCXAE250 or CMCXAF300 9600.50003306 500 KCMIL 37W (253 mm²) 3/C VFD W/6 AWG 3/C GROUND 2.75 69.9 2.92 74.2 TMCX8302 F TMCX300A TMCX300NB TMCX300SS 4-300-260 CMCXAF300 9600.50004102 500 KCMIL 37W (253 mm²) 4C W/2 AWG 1/C GROUND 3.03 77.0 3.21 81.5 TMCX9352 H TMCX350A TMCX350NB TMCX350SS — CMCXAH350 9600.75003305 750 KCMIL 61W (380 mm²) 3/C VFD W/5 AWG 3/C GROUND 3.11 79.0 3.30 83.8 TMCX9352 H TMCX350A TMCX350NB TMCX350SS 4-350-290 CMCXAH350 9600.75004101 750 KCMIL 61W (380 mm²) 4/C W/1 AWG 1/C GROUND 3.63 92.2 3.81 96.8 TMCX10402 — TMCX402400* 4-400-330 — CMCXAC2125 Power - 1000 V — — CCW® ARMORED POWER, 1000 V, 3/C VFD WITH BARE GROUND 9675.00103310 1 AWG 19W (42.4 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.36 34.6 1.46 37.1 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 9675.00203310 2 AWG 7W (33.6 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.18 29.9 1.28 32.5 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-100 CMCXAC100 or CMCXAC2125 9675.00403312 4 AWG 7W (21.2 mm²) 3/C VFD W/12 AWG 3/C GROUND 0.98 24.8 1.08 27.4 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-100-080 9675.00603312 6 AWG 7W (13.3 mm²) 3/C VFD W/12 AWG 3/C GROUND 0.91 23.2 1.02 26.0 TMCX3112 B or C TMCX100A TMCX100NB TMCX100SS 4-100-070 CMCXAB075 or CMCXAC100 9675.00803314 8 AWG 7W (8.36 mm²) 3/C VFD W/14 AWG 3/C GROUND 0.76 19.2 0.86 21.9 TMCX285 B TMCX075A* TMCX075NB* TMCX075SS* 4-100-050 9675.01003316 10 AWG 7W (5.26 mm²) 3/C VFD W/16 AWG 3/C GROUND 0.63 16.1 0.73 18.6 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9675.01203318 12 AWG 7W (3.31 mm²) 3/C VFD W/18 AWG 3/C GROUND 0.60 15.3 0.70 17.8 TMCX165 or TMCX285 A or B TMCX075A TMCX075NB TMCX075SS 4-075-030 CMCXAA050 or CMCXAB075 9675.11003310 1/0 AWG 19W (53.5 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.42 36.0 1.52 38.6 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 9675.21003310 2/0 AWG 19W (67.4 mm²) 3/C VFD W/10 AWG 3/C GROUND 1.56 39.6 1.66 42.2 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 CMCXAC2125 or CMCXAD200 9675.25003308 250 KCMIL 37W (127 mm²) 3/C VFD W/8 AWG 3/C GROUND 1.90 48.2 2.01 51.1 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 9675.41003308 4/0 AWG 19W (107 mm²) 3/C VFD W/8 AWG 3/C GROUND 1.75 44.4 1.85 47.0 TMCX6206 D 9675.50003306 500 KCMIL 37W (253 mm²) 3/C VFD W/6 AWG 3/C GROUND 2.48 63.0 2.59 65.8 TMCX7247 or TMCX8302 E or F Phone: 888-593-3355 www.generalcable.com TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 TMCX250A* TMCX250NB* TMCX250SS* CMCXAC100 CMCXAB075 CMCXAD200 4-300-240 CMCXAE250 or CMCXAF300 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL Power - 2.4 kV INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum Thomas & Betts NP Brass Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED POWER, 2.4 kV, NONSHIELDED, 3/C VFD WITH BARE GROUND OR MV-90 W/90 MILS INSULATION 9700.00103308 1 AWG 19W (42.4 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.42 36.1 1.53 38.9 TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-140 CMCXAC2125 or CMCXAD200 9700.00203310 2 AWG 7W (33.6 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 9700.00403310 4 AWG 7W (21.2 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.19 30.2 1.30 33.0 TMCX4140 C or C2 TMCX125A TMCX125NB TMCX125SS 4-125-110 CMCXAC100 or CMCXAC2125 9700.00603310 6 AWG 7W (13.3 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.06 26.9 1.17 29.7 TMCX3112 C TMCX100A* TMCX100NB* TMCX100SS* 4-125-090 CMCXAC100 9700.00803312 8 AWG 7W (8.36 mm²) 3/C MC-HL W/12 AWG 3/C GROUND 0.97 24.6 1.08 27.4 TMCX3112 C TMCX100A TMCX100NB TMCX100SS 4-100-080 CMCXAB075 or CMCXAC100 9700.10003304 1000 KCMIL 61W (507 mm²) 3/C MC-HL W/4 AWG 3/C GROUND 3.41 86.6 3.59 91.2 TMCX9352 H TMCX350A* TMCX350NB* TMCX350SS* 4-350-310 CMCXAH350 9700.11003308 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.51 38.4 1.65 41.9 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 CMCXAC2125 or CMCXAD200 CMCXAC2125 9700.21003308 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9700.25003307 250 KCMIL 37W (127 mm²) 3/C MC-HL W/7 AWG 3/C GROUND 1.96 49.8 2.09 53.1 TMCX6206 or TMCX7247 D or E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAD200 or CMCXAE250 9700.35003306 350 KCMIL 37W (177 mm²) 3/C MC-HL W/6 AWG 3/C GROUND 2.19 55.6 2.32 58.9 TMCX7247 E TMCX250SA* TMCX250SNB* TMCX250SSS* 4-250-220 9700.41003307 4/0 AWG 19W (107 mm²) 3/C MC-HL W/7 AWG 3/C GROUND 1.83 46.5 1.96 49.8 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-180 9700.50003305 500 KCMIL 37W (253 mm²) 3/C MC-HL W/5 AWG 3/C GROUND 2.45 62.2 2.61 66.3 TMCX7247 or TMCX8302 E or F TMCX250A* TMCX250NB* TMCX250SS* 4-300-240 CMCXAE250 or CMCXAF300 9700.75003304 750 KCMIL 37W (380 mm²) 3/C MC-HL W/4 AWG 3/C GROUND 2.93 74.4 3.10 78.7 TMCX8302 F or H TMCX350A TMCX350NB TMCX350SS — CMCXAF300 or CMCXAH350 CMCXAE250 CMCXAD200 or CMCXAE250 Power 5 kV (133%) / 8 kV (100%) CCW® ARMORED POWER, 5 kV 133%/8 kV 100%, SHIELDED, 3/C VFD WITH BARE GROUND OR MV-105 W/115 MILS INSULATION 9800.00103308 1 AWG 19W (42.4 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.69 42.9 1.82 46.2 TMCX6206 D TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 CMCXAD200 9800.00203310 2 AWG 7W (33.6 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.64 41.7 1.78 45.2 TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9800.00403310 4 AWG 7W (21.2 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.51 38.4 1.65 41.9 TMCX5161 C2 or D TMCX200SA TMCX200SNB TMCX200SSS 4-150-150 CMCXAC2125 or CMCXAD200 9800.00603310 6 AWG 7W (13.3 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.37 34.8 1.48 37.6 TMCX4140 or TMCX5161 C2 or D TMCX150A TMCX150NB TMCX150SS 4-150-130 CMCXAC2125 or CMCXAD200 9800.00803312 8 AWG 7W (8.36 mm²) 3/C MC-HL W/12 AWG 3/C GROUND 1.34 34.0 1.45 36.8 TMCX4140 or TMCX5161 C2 TMCX150A TMCX150NB TMCX150SS 4-150-130 9800.10003304 1000 KCMIL 61W (507 mm²) 3/C MC-HL W/4 AWG 3/C GROUND 3.76 95.5 3.94 100.1 TMCX10402 — TMCX402400* 9800.11003308 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.78 45.2 1.91 48.5 TMCX6206 D or E TMCX200A TMCX200NB 9800.21003308 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.92 48.8 2.05 52.1 TMCX6206 D or E TMCX200A 9800.25003307 250 KCMIL 37W (127 mm²) 3/C MC-HL W/7 AWG 3/C GROUND 2.23 56.6 2.36 59.9 TMCX7247 E TMCX250SA* 9800.35003306 350 KCMIL 37W (177 mm²) 3/C MC-HL W/6 AWG 3/C GROUND 2.45 62.2 2.61 66.3 TMCX7247 or TMCX8302 E or F 9800.41003307 4/0 AWG 19W (107 mm²) 3/C MC-HL W/7 AWG 3/C GROUND 2.15 54.6 2.28 57.9 TMCX7247 9800.50003305 500 KCMIL 37W (253 mm²) 3/C MC-HL W/5 AWG 3/C GROUND 2.75 69.9 2.92 74.2 TMCX8302 9800.75003304 750 KCMIL 61W (380 mm²) 3/C MC-HL W/4 AWG 3/C GROUND 3.32 84.3 3.50 88.9 TMCX9352 Power - 8 kV (133%) — — CMCXAC2125 4-400-330 — TMCX200SS 4-200-180 CMCXAD200 or CMCXAE250 TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 TMCX250SNB* TMCX250SSS* 4-250-220 TMCX250A* TMCX250NB* TMCX250SS* 4-300-240 CMCXAE250 or CMCXAF300 E TMCX250SA TMCX250SNB TMCX250SSS 4-250-210 CMCXAE250 F TMCX300A TMCX300NB TMCX300SS 4-300-260 CMCXAF300 H TMCX350A* TMCX350NB* TMCX350SS* — CMCXAH350 CMCXAE250 CCW® ARMORED POWER, 8 kV 133%, SHIELDED, 3/C VFD WITH BARE GROUND OR MV-105 W/140 MILS INSULATION 9815.00103308 1 AWG 19W (42.4 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 1.93 49.0 2.06 52.3 TMCX6206 or TMCX7247 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 9815.00203310 2 AWG 7W (33.6 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.85 47.0 1.98 50.3 TMCX6206 D or E TMCX200A TMCX200NB TMCX200SS 4-200-190 CMCXAD200 or CMCXAE250 9815.00403310 4 AWG 7W (21.2 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.70 43.2 1.83 46.5 TMCX6206 D TMCX200SA* TMCX200SNB* TMCX200SSS* 4-200-170 CMCXAD200 9815.00603310 6 AWG 7W (13.3 mm²) 3/C MC-HL W/10 AWG 3/C GROUND 1.60 40.6 1.73 43.9 TMCX5161 or TMCX6206 D TMCX200SA TMCX200SNB TMCX200SSS 4-200-160 CMCXAD200 9815.10003304 1000 KCMIL 61W (507 mm²) 3/C MC-HL W/4 AWG 3/C GROUND 3.98 101.1 4.16 105.7 TMCX10402 — TMCX402400* — — 4-400-350 — 9815.11003308 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 2.03 51.6 2.16 54.9 TMCX6206 or TMCX7247 E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAE250 9815.21003308 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/8 AWG 3/C GROUND 2.14 54.4 2.27 57.7 TMCX7247 E TMCX250SA TMCX250SNB TMCX250SSS 4-250-210 CMCXAE250 9815.25003307 250 KCMIL 37W (127 mm²) 3/C MC-HL W/7 AWG 3/C GROUND 2.59 65.8 2.75 69.9 TMCX8302 F TMCX300A TMCX300NB TMCX300SS 4-300-250 CMCXAF300 9815.35003306 350 KCMIL 37W (177 mm²) 3/C MC-HL W/6 AWG 3/C GROUND 2.85 72.4 3.01 76.5 TMCX8302 F TMCX300A* TMCX300NB* TMCX300SS* — CMCXAF300 9815.41003307 4/0 AWG 19W (107 mm²) 3/C MC-HL W/7 AWG 3/C GROUND 2.40 61.0 2.56 65.0 TMCX7247 E or F TMCX250A TMCX250NB TMCX250SS TMCX350NB TMCX350SS 9815.50003305 500 KCMIL 37W (253 mm²) 3/C MC-HL W/5 AWG 3/C GROUND 3.19 81.0 3.37 85.6 TMCX9352 H TMCX350A 9815.75003304 750 KCMIL 61W (380 mm²) 3/C MC-HL W/4 AWG 3/C GROUND 3.68 93.5 3.86 98.0 TMCX10402 — TMCX402400* — — 4-300-240 CMCXAE250 or CMCXAF300 4-350-300 CMCXAH350 4-400-330 — All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A010 April, 2010 CCW Explosion-Proof Gland Cross-Reference ® NOMINAL ARMOR O.D. CCW PART NUMBER PRODUCT DETAIL Power - 15 kV (100%) INCHES mm NOMINAL OVERALL O.D. INCHES mm CROUSE-HINDS TMCX Series APPLETON (TMCX) *end stop removed HAWKE 711 Series Aluminum NP Brass Thomas & Betts Stainless Steel Spin-On X Hubbell/Killark CMCXA CCW® ARMORED POWER, 15 kV 100%, SHIELDED, 3/C WITH BARE GROUND OR MV-105 175 MILS INSULATION 9825.00103104 1 AWG 19W (42.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.01 51.1 2.15 54.6 TMCX6206 or TMCX7247 E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAE250 9825.00203106 2 AWG 7W (33.6 mm²) 3/C MC-HL W/6 AWG GROUND 1.96 49.8 2.05 52.1 TMCX6206 or TMCX7247 D or E TMCX200A* TMCX200NB* TMCX200SS* 4-250-200 CMCXAD200 or CMCXAE250 9825.11003104 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/4 AWG GROUND 2.10 53.3 2.24 56.9 TMCX7247 E TMCX250SA TMCX250SNB TMCX250SSS 4-250-210 CMCXAE250 9825.21003104 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.19 55.6 2.36 59.9 TMCX7247 E TMCX250SA* TMCX250SNB* TMCX250SSS* 4-250-220 CMCXAE250 9825.25003103 250 KCMIL 37W (127 mm²) 3/C MC-HL W/3 AWG GROUND 2.58 65.5 2.74 69.6 TMCX8302 F TMCX300A TMCX300NB TMCX300SS 4-300-250 CMCXAF300 9825.35003102 350 KCMIL 37W (177 mm²) 3/C MC-HL W/2 AWG GROUND 2.85 72.4 3.01 76.5 TMCX8302 F TMCX300A* TMCX300NB* TMCX300SS* — CMCXAF300 9825.41003103 4/0 AWG 19W (107 mm²) 3/C MC-HL W/3 AWG GROUND 2.45 62.2 2.61 66.3 TMCX7247 or TMCX8302 E or F TMCX250A* TMCX250NB* TMCX250SS* 4-300-240 CMCXAE250 or CMCXAF300 9825.50003101 500 KCMIL 37W (253 mm²) 3/C MC-HL W/1 AWG GROUND 3.16 80.3 3.34 84.8 TMCX9352 H TMCX350A TMCX350NB TMCX350SS 4-350-290 CMCXAH350 CMCXAE250 Power - 15 kV (133%) CCW® ARMORED POWER, 15 kV 133%, SHIELDED, 3/C WITH BARE GROUND OR MV-105 220 MILS INSULATION 9835.00103104 1 AWG 19W (42.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.23 56.6 2.36 59.9 TMCX7247 E TMCX250SA* TMCX250SNB* TMCX250SSS* 4-250-220 9835.00203106 2 AWG 7W (33.6 mm²) 3/C MC-HL W/6 AWG GROUND 2.15 54.6 2.28 57.9 TMCX7247 E TMCX250SA TMCX250SNB TMCX250SSS 4-250-210 CMCXAE250 9835.11003104 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/4 AWG GROUND 2.32 58.9 2.48 63.0 TMCX7247 E or F TMCX250A TMCX250NB TMCX250SS 4-250-230 CMCXAE250 or CMCXAF300 9835.21003104 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.40 61.0 2.56 65.0 TMCX7247 E or F TMCX250A TMCX250NB TMCX250SS 4-300-240 CMCXAE250 or CMCXAF300 9835.25003103 250 KCMIL 37W (127 mm²) 3/C MC-HL W/3 AWG GROUND 2.75 69.9 2.92 74.2 TMCX8302 F TMCX300A TMCX300NB TMCX300SS 4-300-260 CMCXAF300 9835.35003102 350 KCMIL 37W (177 mm²) 3/C MC-HL W/2 AWG GROUND 3.03 77.0 3.21 81.5 TMCX9352 H TMCX350A TMCX350NB TMCX350SS — CMCXAH350 9835.41003103 4/0 AWG 19W (107 mm²) 3/C MC-HL W/3 AWG GROUND 2.62 66.5 2.79 70.9 TMCX8302 F TMCX300A TMCX300NB TMCX300SS 4-300-250 CMCXAF300 9835.50003101 500 KCMIL 37W (253 mm²) 3/C MC-HL W/1 AWG GROUND 3.32 84.3 3.50 88.9 TMCX9352 H TMCX350A* TMCX350NB* TMCX350SS* — CMCXAH350 9835.750031110 750 KCMIL 61W (380 mm²) 3/C MC-HL W/1/0 AWG GROUND 3.80 96.5 3.98 101.1 TMCX10402 — TMCX402400* — — — — Power - 25 kV (100%) CCW® ARMORED POWER, 25 kV 100%, SHIELDED, 3/C WITH BARE GROUND OR MV-105 260 MILS INSULATION 9845.00103104 1 AWG 19W (42.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.45 62.2 2.61 66.3 TMCX7247 or TMCX8302 E or F TMCX250A* TMCX250NB* TMCX250SS* 4-300-240 CMCXAE250 or CMCXAF300 9845.11003104 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/4 AWG GROUND 2.53 64.3 2.69 68.3 TMCX8302 E or F TMCX250A* TMCX250NB* TMCX250SS* 4-300-250 CMCXAE250 or CMCXAF300 9845.21003104 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.62 66.5 2.79 70.9 TMCX8302 F TMCX300A TMCX300NB TMCX300SS 4-300-250 CMCXAF300 9845.25003103 250 KCMIL 37W (127 mm²) 3/C MC-HL W/3 AWG GROUND 3.07 78.0 3.25 82.6 TMCX9352 H TMCX350A TMCX350NB TMCX350SS 4-350-290 CMCXAH350 9845.35003102 350 KCMIL 37W (177 mm²) 3/C MC-HL W/2 AWG GROUND 3.32 84.3 3.50 88.9 TMCX9352 H TMCX350A* TMCX350NB* TMCX350SS* — CMCXAH350 9845.41003103 4/0 AWG 19W (107 mm²) 3/C MC-HL W/3 AWG GROUND 2.93 74.4 3.10 78.7 TMCX8302 F or H TMCX350A TMCX350NB TMCX350SS — CMCXAF300 or CMCXAH350 9845.50003101 500 KCMIL 37W (253 mm²) 3/C MC-HL W/1 AWG GROUND 3.62 91.9 3.81 96.8 TMCX10402 — — — 4-400-330 — TMCX402400* Power 25 kV (133%)/35 kV (100%) CCW® ARMORED POWER, 25 kV 133%/35 kV 100%, SHIELDED, 3/C WITH BARE GROUND OR MV-105 345 MILS INSULATION 9855.00103104 1 AWG 19W (42.4 mm²) 3/C MC-HL W/4 AWG GROUND 2.89 73.4 3.05 77.5 TMCX8302 F TMCX300A* TMCX300NB* TMCX300SS* — CMCXAF300 9855.11003104 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/4 AWG GROUND 2.98 75.7 3.14 79.8 TMCX8302 or TMCX9352 F or H TMCX350A TMCX350NB TMCX350SS — CMCXAF300 or CMCXAH350 9855.21003104 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/4 AWG GROUND 3.11 79.0 3.30 83.8 TMCX9352 H TMCX350A TMCX350NB TMCX350SS 4-350-290 CMCXAH350 9855.25003103 250 KCMIL 37W (127 mm²) 3/C MC-HL W/3 AWG GROUND 3.63 92.2 3.81 96.8 TMCX10402 — TMCX402400* — — 4-400-330 -— 9855.35003102 350 KCMIL 37W (177 mm²) 3/C MC-HL W/2 AWG GROUND 3.76 95.5 3.94 100.1 TMCX10402 — TMCX402400* — — 4-400-330 — 9855.41003103 4/0 AWG 19W (107 mm²) 3/C MC-HL W/3 AWG GROUND 3.41 86.6 3.60 91.4 TMCX9352 H TMCX350A* TMCX350NB* TMCX350SS* 4-350-310 CMCXAH350 9855.50003101 500 KCMIL 37W (253 mm²) 3/C MC-HL W/1 AWG GROUND 4.10 104.1 4.23 107.4 — — — — — — Power 35 kV (133%) — CCW® ARMORED POWER, 35 kV 133%, SHIELDED, 3/C WITH BARE GROUND OR MV-105 420 MILS INSULATION 9875.11003104 1/0 AWG 19W (53.5 mm²) 3/C MC-HL W/4 AWG GROUND 3.41 86.6 3.59 91.2 TMCX9352 H TMCX350A* TMCX350NB* TMCX350SS* 4-350-310 CMCXAH350 9875.21003104 2/0 AWG 19W (67.4 mm²) 3/C MC-HL W/4 AWG GROUND 3.63 92.2 3.81 96.8 TMCX10402 — TMCX402400* — — 4-400-330 — 9875.25003103 250 KCMIL 37W (127 mm²) 3/C MC-HL W/3 AWG GROUND 3.98 101.1 4.16 105.7 TMCX10402 — TMCX402400* — — 4-400-350 — 9875.35003102 350 KCMIL 37W (177 mm²) 3/C MC-HL W/2 AWG GROUND 4.10 104.1 4.29 109.0 — — — — — —- — 9875.41003103 4/0 AWG 19W (107 mm²) 3/C MC-HL W/3 AWG GROUND 3.80 96.5 3.98 101.1 TMCX10402 — TMCX402400* — — — — 9875.50003101 500 KCMIL 37W (253 mm²) 3/C MC-HL W/1 AWG GROUND 4.45 113.0 4.63 117.6 — — — — — — — All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A015 January, 2013 CCW Part Number Cross-Reference – Okonite C-L-X® to General Cable CCW® ® Okonite C-L-X® Part Number General Cable CCW® Part Number Okonite C-L-X® Part Number General Cable CCW® Part Number Okonite C-L-X® Part Number General Cable CCW® Part Number 546-31-3002 9525.01402000 546-31-3927 9650.123144000 561-15-3304 9250.18041222 546-31-3003 9525.01403000 546-31-3950 9650.124143000 561-15-3308 9250.18081222 546-31-3004 9525.01404000 546-31-3956 9650.104143000 561-15-3312 9250.18121222 546-31-3005 9525.01405000 546-31-3958 9650.104124000 561-15-3316 9250.18161222 546-31-3007 9525.01407000 546-31-3983 9650.123143000 561-15-3324 9250.18241222 546-31-3009 9525.01409000 546-31-3984 9625.103124110 561-15-3336 9250.18361222 546-31-3012 9525.01412000 546-31-3987 9650.104144000 561-15-3404 9250.16041222 546-31-3019 9525.01419000 546-31-3988 9650.104123000 561-15-3408 9250.16081222 546-31-3037 9525.01437000 546-31-3990 9650.103123000 561-15-3412 9250.16121222 546-31-3082 9525.01202000 546-31-3992 9650.103144000 561-15-3416 9250.16161222 546-31-3083 9525.01203000 561-10-3202 9250.20021221 561-15-3424 9250.16241222 546-31-3084 9525.01204000 561-10-3204 9250.20041221 561-15-3436 9250.16361222 546-31-3085 9525.01205000 561-10-3206 9250.20061221 561-60-3402 9350.16020001 546-31-3087 9525.01207000 561-10-3208 9250.20081221 561-60-3404 9350.16040001 546-31-3089 9525.01209000 561-10-3210 9250.20101221 561-60-3406 9350.16060001 546-31-3092 9525.01212000 561-10-3212 9250.20121221 561-60-3408 9350.16080001 546-31-3099 9525.01219000 561-10-3216 9250.20161221 561-60-3410 9350.16100001 546-31-3117 9525.01237000 561-10-3220 9250.20201221 561-60-3412 9350.16120001 546-31-3162 9525.01002000 561-10-3224 9250.20241221 561-60-3416 9350.16160001 9350.16200001 546-31-3163 9525.01003000 561-10-3236 9250.20361221 561-60-3420 546-31-3164 9525.01004000 561-10-3250 9250.20501221 561-60-3424 9350.16240001 546-31-3165 9525.01005000 561-10-3302 9250.18021221 561-60-3436 9350.16360001 546-31-3167 9525.01007000 561-10-3304 9250.18041221 561-60-3450 9350.16500001 546-31-3169 9525.01009000 561-10-3306 9250.18061221 561-65-3404 9350.16040002 546-31-3172 9525.01012000 561-10-3308 9250.18081221 561-65-3408 9350.16080002 546-31-3402 9500.01402114 561-10-3310 9250.18101221 561-65-3412 9350.16120002 546-31-3403 9600.01403318 561-10-3312 9250.18121221 561-65-3416 9350.16160002 546-31-3404 9600.01404318 561-10-3316 9250.18161221 561-65-3424 9350.16240002 546-31-3406 9500.01406114 561-10-3320 9250.18201221 561-65-3436 9350.16360002 546-31-3408 9500.01408114 561-10-3324 9250.18241221 564-10-3202 9225.20021221 546-31-3411 9500.01411114 561-10-3336 9250.18361221 564-10-3204 9225.20041221 546-31-3418 9500.01418114 561-10-3350 9250.18501221 564-10-3206 9225.20061221 546-31-3436 9500.01436114 561-10-3402 9250.16021221 564-10-3208 9225.20081221 546-31-3452 9500.01202112 561-10-3404 9250.16041221 564-10-3210 9225.20101221 546-31-3453 9600.01203316 561-10-3406 9250.16061221 564-10-3212 9225.20121221 546-31-3454 9600.01204316 561-10-3408 9250.16081221 564-10-3216 9225.20161221 546-31-3456 9500.01206112 561-10-3410 9250.16101221 564-10-3220 9225.20201221 546-31-3458 9500.01208112 561-10-3412 9250.16121221 564-10-3224 9225.20241221 546-31-3461 9500.01211112 561-10-3416 9250.16161221 564-10-3236 9225.20361221 546-31-3468 9500.01218112 561-10-3420 9250.16201221 564-10-3250 9225.20501221 546-31-3486 9500.01236112 561-10-3424 9250.16241221 564-10-3302 9225.18021221 546-31-3502 9500.01002110 561-10-3436 9250.16361221 564-10-3304 9225.18041221 546-31-3503 9600.01003314 561-10-3450 9250.16501221 564-10-3306 9225.18061221 546-31-3504 9600.01004314 561-15-3204 9250.20041222 564-10-3308 9225.18081221 546-31-3506 9500.01006110 561-15-3208 9250.20081222 564-10-3310 9225.18101221 546-31-3508 9500.01008110 561-15-3212 9250.20121222 564-10-3312 9225.18121221 546-31-3511 9500.01011110 561-15-3216 9250.20161222 564-10-3316 9225.18161221 546-31-3758 9650.103143000 561-15-3224 9250.20241222 564-10-3320 9225.18201221 546-31-3925 9650.124144000 561-15-3236 9250.20361222 564-10-3324 9225.18241221 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A015 January, 2013 CCW Part Number Cross-Reference – Okonite C-L-X® to General Cable CCW® ® Okonite C-L-X® Part Number General Cable CCW® Part Number Okonite C-L-X® Part Number General Cable CCW® Part Number Okonite C-L-X® Part Number General Cable CCW® Part Number 564-10-3336 9225.18361221 564-65-3408 9325.16080002 571-21-3244 9700.50003305 564-10-3350 9225.18501221 564-65-3412 9325.16120002 571-21-3248 9700.75003304 564-10-3401 9225.16010001 564-65-3416 9325.16160002 571-21-3252 9700.10003304 564-10-3402 9225.16021221 564-65-3424 9325.16240002 571-22-3696 9800.00603310 9800.00403310 564-10-3404 9225.16041221 564-65-3436 9325.16360002 571-22-3698 564-10-3406 9225.16061221 567-86-3402 9150.16021201 571-22-3706 9800.00203310 564-10-3408 9225.16081221 567-86-3404 9150.16041201 571-22-3708 9800.00103308 564-10-3410 9225.16101221 567-86-3408 9150.16081201 571-22-3710 9800.11003308 564-10-3412 9225.16121221 567-86-3412 9150.16121201 571-22-3717 9800.21003308 564-10-3416 9225.16161221 567-86-3424 9150.16241201 571-22-3725 9800.41003307 564-10-3420 9225.16201221 567-86-3436 9150.16361201 571-22-3727 9800.25003307 9800.75003304 564-10-3424 9225.16241221 567-86-3450 9150.16501201 571-22-3748 564-10-3436 9225.16361221 567-87-3402 9150.16021202 571-22-3751 9800.10003304 564-10-3450 9225.16501221 567-87-3404 9150.16041202 571-22-3838 9800.35003306 564-15-3204 9225.20041222 567-87-3408 9150.16081202 571-22-3846 9800.50003305 564-15-3208 9225.20081222 567-87-3412 9150.16121202 571-23-3204 9825.00203106 564-15-3212 9225.20121222 567-87-3424 9150.16241202 571-23-3208 9825.00103104 564-15-3216 9225.20161222 567-87-3436 9150.16361202 571-23-3212 9825.11003104 564-15-3224 9225.20241222 567-87-3450 9150.16501202 571-23-3216 9825.21003104 564-15-3236 9225.20361222 567-93-3801 9125.16010001 571-23-3224 9825.41003103 564-15-3304 9225.18041222 567-93-3802 9125.16021201 571-23-3228 9825.25003103 564-15-3308 9225.18081222 567-93-3804 9125.16041201 571-23-3236 9825.35003102 564-15-3312 9225.18121222 567-93-3808 9125.16081201 571-23-3244 9825.50003101 564-15-3316 9225.18161222 567-93-3812 9125.16121201 571-23-3504 9835.00203106 9835.00103104 564-15-3324 9225.18241222 567-93-3816 9125.16161201 571-23-3508 564-15-3336 9225.18361222 567-93-3824 9125.16241201 571-23-3512 9835.11003104 564-15-3401 9225.16010002 567-93-3836 9125.16361201 571-23-3516 9835.21003104 564-15-3404 9225.16041222 567-93-3850 9125.16501201 571-23-3524 9835.41003103 564-15-3408 9225.16081222 567-94-3801 9125.16010002 571-23-3528 9835.25003103 9835.35003102 564-15-3412 9225.16121222 567-94-3802 9125.16021202 571-23-3536 564-15-3416 9225.16161222 567-94-3804 9125.16041202 571-23-3544 9835.50003101 564-15-3424 9225.16241222 567-94-3808 9125.16081202 571-23-3548 9835.750031110 9845.00103104 564-15-3436 9225.16361222 567-94-3812 9125.16121202 571-23-3758 564-60-3401 9325.16010001 567-94-3816 9125.16161202 571-23-3762 9845.11003104 564-60-3402 9325.16020001 567-94-3824 9125.16241202 571-23-3766 9845.21003104 564-60-3404 9325.16040001 567-94-3836 9125.16361202 571-23-3774 9845.41003103 564-60-3406 9325.16060001 567-94-3850 9125.16501202 571-23-3778 9845.25003103 564-60-3408 9325.16080001 571-21-3193 9700.00803312 571-23-3786 9845.35003102 564-60-3410 9325.16100001 571-21-3196 9700.00603310 571-23-3794 9845.50003101 564-60-3412 9325.16120001 571-21-3200 9700.00403310 571-23-3808 9855.00103104 564-60-3416 9325.16160001 571-21-3204 9700.00203310 571-23-3812 9855.11003104 564-60-3420 9325.16200001 571-21-3208 9700.00103308 571-23-3816 9855.21003104 564-60-3424 9325.16240001 571-21-3212 9700.11003308 571-23-3824 9855.41003103 564-60-3436 9325.16360001 571-21-3217 9700.21003308 571-23-3826 9855.25003103 564-60-3450 9325.16500001 571-21-3224 9700.41003307 571-23-3836 9855.35003102 564-65-3401 9325.16010002 571-21-3228 9700.25003307 571-23-3844 9855.50003101 564-65-3404 9325.16040002 571-21-3236 9700.35003306 571-23-3852 9875.11003104 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A015 January, 2013 CCW Part Number Cross-Reference – Okonite C-L-X® to General Cable CCW® ® Okonite C-L-X® Part Number General Cable CCW® Part Number Okonite C-L-X® Part Number General Cable CCW® Part Number Okonite C-L-X® Part Number General Cable CCW® Part Number 571-23-3856 9875.21003104 571-31-3670 9650.044123000 584-10-4216 9075.20161224 571-23-3864 9875.41003103 571-31-3671 9650.043123000 584-10-4220 9075.20201224 571-23-3876 9875.35003102 571-31-3672 9650.044124000 584-10-4224 9075.20241224 571-23-3884 9875.50003101 571-31-3673 9650.063123000 584-10-4236 9075.20361224 571-31-3190 9600.00803314 571-31-3674 9650.023144000 584-10-4250 9075.20501224 571-31-3191 9600.00603312 571-31-3675 9650.023123000 584-20-1204 9050.20041221 571-31-3192 9650.083143000 571-31-3677 9625.043124108 584-20-1208 9050.20081221 571-31-3195 9650.063143000 571-31-3680 9650.084124000 584-20-1210 9050.20101221 571-31-3200 9600.00403312 571-31-3682 9650.084143000 584-20-1212 9050.20121221 571-31-3203 9650.023143000 571-31-3683 9650.084123000 584-20-1216 9050.20161221 9050.20201221 571-31-3204 9600.00203310 571-31-3684 9650.064144000 584-20-1220 571-31-3208 9600.00103310 571-31-3685 9650.064123000 584-20-1224 9050.20241221 571-31-3213 9600.11003310 571-31-3688 9650.044143000 584-20-1236 9050.20361221 9050.20501221 571-31-3216 9600.21003310 571-31-3960 9650.084144000 584-20-1250 571-31-3224 9600.41003308 571-31-3965 9650.064124000 584-20-1401 9025.16010001 571-31-3228 9600.25003308 571-31-3968 9650.064143000 584-20-2204 9050.20041222 571-31-3236 9600.35003307 571-31-3970 9650.043144000 584-20-2208 9050.20081222 571-31-3244 9600.50003306 571-31-3974 9650.043124000 584-20-2210 9050.20101222 571-31-3248 9600.75003305 584-10-1204 9075.20041221 584-20-2212 9050.20121222 571-31-3252 9600.100031110 584-10-1208 9075.20081221 584-20-2216 9050.20161222 571-31-3263 9600.00804110 584-10-1210 9075.20101221 584-20-2220 9050.20201222 571-31-3270 9600.00604108 584-10-1216 9075.20161221 584-20-2224 9050.20241222 571-31-3272 9600.00404108 584-10-1220 9075.20201221 584-20-2236 9050.20361222 9050.20501222 571-31-3276 9600.00204106 584-10-1224 9075.20241221 584-20-2250 571-31-3280 9600.00104106 584-10-1236 9075.20361221 584-20-2401 9025.16010002 571-31-3285 9600.11004106 584-10-1250 9075.20501221 584-20-3204 9050.20041223 571-31-3289 9600.21004106 584-10-2204 9075.20041222 584-20-3208 9050.20081223 571-31-3296 9600.41004104 584-10-2208 9075.20081222 584-20-3210 9050.20101223 571-31-3300 9600.25004104 584-10-2210 9075.20101222 584-20-3212 9050.20121223 571-31-3308 9600.35004103 584-10-2212 9075.20121222 584-20-3216 9050.20161223 9050.20201223 571-31-3316 9600.50004102 584-10-2216 9075.20161222 584-20-3220 571-31-3320 9600.75004101 584-10-2220 9075.20201222 584-20-3224 9050.20241223 571-31-3324 9600.100041110 584-10-2224 9075.20241222 584-20-3236 9050.20361223 9050.20501223 571-31-3505 9650.023124000 584-10-2236 9075.20361222 584-20-3250 571-31-3506 9650.024143000 584-10-2250 9075.20501222 584-20-3401 9025.16010003 571-31-3507 9650.024144000 584-10-3204 9075.20041223 584-20-4204 9050.20041224 571-31-3508 9650.024123000 584-10-3208 9075.20081223 584-20-4208 9050.20081224 571-31-3509 9650.024124000 584-10-3210 9075.20101223 584-20-4210 9050.20101224 571-31-3655 9650.043143000 584-10-3212 9075.20121223 584-20-4212 9050.20121224 571-31-3657 9625.083124110 584-10-3216 9075.20161223 584-20-4216 9050.20161224 9050.20201224 571-31-3661 9650.083144000 584-10-3220 9075.20201223 584-20-4220 571-31-3664 9650.083123000 584-10-3224 9075.20241223 584-20-4224 9050.20241224 571-31-3665 9650.083124000 584-10-3236 9075.20361223 584-20-4236 9050.20361224 571-31-3666 9650.063144000 584-10-3250 9075.20501223 584-20-4250 9050.20501224 571-31-3667 9625.063124108 584-10-4204 9075.20041224 584-20-4401 9025.16010004 571-31-3668 9650.063124000 584-10-4208 9075.20081224 571-31-3669 9650.044144000 584-10-4212 9075.20121224 All information in this cross-reference is presented solely as a guide to product selection and is believed to be reliable. All printing errors are subject to correction in subsequent releases of this catalog. Although General Cable has taken precautions to ensure the accuracy of the product cross-reference at the time of publication, the specifications of all products contained herein are subject to change by gland manufacturers without notice. Phone: 888-593-3355 www.generalcable.com SPEC A030 April, 2010 Reference Standards AEIC CS5: Specifications for Thermoplastic and Crosslinked Polyethylene Insulated Shielded Power Cables Rated 5 Through 69 kV AEIC CS6: Specifications for Ethylene Propylene Rubber Insulated Shielded Power Cables Rated 5 Through 69 kV AEIC CS8: Specification for Extended Dielectric, Shielded Power Cables Rated 5 through 46 kV ANSI C2: National Electrical Safety Code ANSI MC96.1: Thermocouple Extension Wire Calibration ASTM B 3: Standard Specification for Soft or Annealed Copper Wire ASTM B 8: Standard Specification for Concentric-Lay Stranded Copper Conductors, Hard, Medium-Hard or Soft ASTM B 33: Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes ASTM B 105: Standard Specification for Hard-Drawn Copper Alloy Wires for Electrical Conductors ASTM B 172: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors ASTM B 173: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors ASTM B 174: Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors ASTM B 189: Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes ASTM B 193: Standard Test Method for Resistivity of Electrical Conductor Materials ASTM B 226: Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors ASTM B 246: Standard Specification for Tinned Hard-Drawn and Medium-HardDrawn Copper Wire for Electrical Purposes ASTM B 258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors ASTM B 263: Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors ASTM B 298: Standard Specification for Silver-Coated Soft or Annealed Copper Wire ASTM B 324: Standard Specification for Nickel-Coated Soft or Annealed Copper Wire ASTM B 355: Standard Specification for Nickel-Coated Soft or Annealed Copper Wire ASTM B 496: Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors ASTM B 738: Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch Stranded Copper Conductors for Use as Electrical Conductors ASTM B 784: Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables ASTM B 785: Standard Specification for Compact Round Modified Concentric-LayStranded Copper Conductors for Use in Insulated Electrical Cables ASTM D 149: Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies ASTM D 1679: Specification for Synthetic Rubber Heat and Moisture-Resisting Insulation for Wire and Cable, 75°C Operation ASTM D 2219: Specification for Polyvinyl Chloride (PVC) Insulation for Wire and Cable, 60° Operation ASTM D 2220: Specification for Polyvinyl Chloride (PVC) Insulation for Wire and Cable, 75° Operation ASTM D 2308: Specification for Polyethylene Jacket for Electrical Insulated Wire and Cable ASTM D 2526: Specification for OzoneResisting Silicone Rubber Insulation for Wire and Cable ASTM D 2655: Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000V ASTM D 2656: Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35000V ASTM D 2768: Specification for GeneralPurpose Ethylene-Propylene Rubber Jacket for Wire and Cable ASTM D 2770: Specification for OzoneResisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable ASTM D 2802: Specification for OzoneResistant Ethylene-Propylene Rubber Insulation for Wire and Cable ASTM D 470: Method of Testing Crosslinked Insulations and Jackets for Wire and Cable ASTM D 3004: Specification for Extruded Thermosetting and Thermoplastic SemiConducting Conductor and Insulation Shields ASTM D 866: Specification for StyreneButadiene (SBR) Synthetic Rubber Jacket for Wire and Cable ASTM D 3554: Specification for TrackResistant Black Thermoplastic High Density Polyethylene Insulation for Wire and Cable ASTM D 1047: Specification for Polyvinyl Chloride (PVC) Jacket for Wire and Cable ASTM D 3555: Specification for TrackResistant Black Crosslinked Thermosetting Polyethylene Insulation for Wire and Cable ASTM D 1351: Specification for Polyethylene Insulation for Wire and Cable ASTM D 1352: Specification for OzoneResisting Butyl Rubber Insulation for Wire and Cable Phone: 888-593-3355 www.generalcable.com ASTM D 1523: Method for Synthetic Rubber Insulation for Wire and Cable, 90° Operation ASTM D 4244: Specification for GeneralPurpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene/ Polyvinyl Chloride (NBR/PVC) Jackets for Wire and Cable SPEC A030 April, 2010 Reference Standards ASTM D 4245: Specification for OzoneResistant Thermoplastic Elastomer Insulation for Wire and Cable, 90°C Dry 75°C Wet Operation ASTM D 4246: Specification for OzoneResistant Thermoplastic Elastomer Insulation for Wire and Cable, 90°C Operation ASTM D 4313: Specification for General Purpose Heavy-Duty and Extra-HeavyDuty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable ASTM D 4363: Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable ASTM D 4496: Test Method of DC Resistance or Conductance of Moderately Conductive Materials CAN/CSA C22.2 No. 211: Standard for Cord Sets and Power-Supply Cords CAN/CSA C22.2 No. 48: Standard for Nonmetallic Sheathed Cable CSA C22.2 No. 0.3: Standard for Test Methods for Electrical Wires and Cables CSA C22.2 No. 16: Standard for Insulated Conductors for Power-Operated Electronic Devices CSA C22.2 No. 35: Standard for ExtraLow-Voltage Control Circuit Cables, LowEnergy Control Cable, and Extra-LowVoltage Control Cable CSA C22.2 No. 38: Standard for Thermoset Insulated Wires and Cables CSA C22.2 No. 75: Standard for Thermoplastic-Insulated Wires and Cables CSA C22.2 No. 123: Standard for Aluminum Sheathed Cables CSA C22.2 No. 127: Standard for Equipment Wires CSA C22.2 No. 138: Standard for Heat Tracing Cable and Cable Sets for Use in Hazardous Locations CAN/CSA C22.2 No. 49: Standard for Flexible Cords and Cables CSA C22.2 No. 174: Standard for Cables and Cable Glands for Use in Hazardous Locations CAN/CSA C22.2 No. 51: Standard for Armored Cable CSA C22.2 No. 188: Standard for Splicing Wire and Cable Connectors CAN/CSA C22.2 No. 96: Standard for Portable Power Cables CSA C22.2 No. 198.2: Standard for Underground Cable Splicing Kits CAN/CSA C22.2 No. 131: Standard for Type TECK 90 Cable CSA C22.2 No. 230: Standard for Tray Cable CAN/CSA C22.2 No. 239: Standard for Control and Instrumentation Cables CSA/CAN3 C22.3 No. 7: Standard for Underground Systems CAN/CSA C22.2 No. 241: IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5,000V Through 46,000V, and Cable Joints for Use with Laminated Dielectric Cable Rated 2,500V Through 500,000V (Adopted IEEE 4041986) CSA M421: Standard for Use of Electricity in Mines CAN/CSA C49.1: Standard for Round Wire, Concentric Lay, Overhead Electrical Conductors CAN/CSA C68.3: Standard for Shielded and Concentric Neutral Power Cables Rated 5-46 kV CSA C22.1: Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations ICEA P-32-382: ICEA Standards Publication for Short Circuit Characteristics of Insulated Cable ICEA P-45-482: ICEA Standards Publication for Short-Circuit Performance of Metallic Shields and Sheaths of Insulated Cable ICEA P-53-426: ICEA/NEMA Standards Publication for Ampacities, Including Effect of Shield Losses for Single-Conductor Solid-Dielectric Power Cable 15 kV through 69 kV (NEMA WC 50) ICEA P-54-440: ICEA/NEMA Standards Publication for Ampacities of Cables in Open-Top Cable Trays (NEMA WC 51) ANSI/ICEA S-70-547: ICEA/ANSI Standards Publication for WeatherResistant Polyolefin-Covered Wire and Cable ICEA S-73-532: ICEA/NEMA/ANSI Standards Publication for Control Cables (NEMA WC 57) ICEA S-75-381: ICEA/NEMA/ANSI Standards Publication for Portable and Power Feeder Cables for Use in Mines and Similar Applications (NEMA WC 58) ICEA S-82-552: ICEA/NEMA Standards Publication for Instrumentation Cables and Thermocouple Wire (NEMA WC 55) ICEA-S-93-639: ICEA/NEMA Standard for Shielded Power Cables Rated 5-46 kV for the Distribution of Electrical Energy (NEMA WC 74) ICEA S-95-658: ICEA/NEMA Standard for Non-shielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy (NEMA WC 70) ICEA S-96-659: ICEA/NEMA Standard for Non-shielded Cables Rated 2001-5000 Volts for use in the Distribution of Electrical Energy (NEMA WC 71) ICEA T-22-294: ICEA Standard Test Procedures for Extended Time-Testing of Wire and Cable Insulations for Service in Wet Locations ICEA T-25-425: ICEA Guide for Establishing Stability of Volume Resistivity for Conducting Polymeric Components of Power Cables ICEA T-26-465: ICEA/NEMA Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Port able Cables for Test (NEMA WC 54) ICEA T-27-581: ICEA/NEMA Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation and Portable Cables (NEMA WC 53) ANSI/ICEA T-28-562: ICEA Standard Test Method for Measurement of Hot Creep of Polymeric Insulations ICEA T-29-520: ICEA Standard for Vertical Tray Flame Tests at 210,000 BTU ICEA T-30-520: ICEA Standard for Vertical Tray Flame Tests at 70,000 BTU Phone: 888-593-3355 www.generalcable.com SPEC A030 April, 2010 Reference Standards ICEA T-31-610: ICEA Standard for Water Penetration Resistance Test, Sealed Conductor IEC 92-3: International Electrotechnical Commission Electrical Installation in Ships – Part 3 Cables (Constructions, Testing and Installations) IEEE 45: IEEE Recommended Practice for Electric Installations on Shipboard IEEE 48: IEEE Standard Test Procedures and Requirements for High-Voltage Alter nating Current Cable Terminations IEEE 100: IEEE Standard Dictionary of Electrical and Electronics Terms IEEE 141: IEEE Recommended Practice for Electric Power Distribution for Industrial Plants (“IEEE Red Book”) IEEE 142: IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (“IEEE Green Book”) IEEE 241: IEEE Recommended Practice for Electric Power Systems in Commercial Buildings (“IEEE Gray Book”) IEEE 242: IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (“IEEE Buff Book”) IEEE 323: IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations IEEE 383: IEEE Standard for Type Test of Class 1E Electric Cables, Field Splices and Connections for Nuclear Power Generating Stations IEEE 400: IEEE Guide for Making HighDirect-Voltage Tests on PowerCable Systems in the Field IEEE 404: IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5,000V Through 46,000V, and Cable Joints for Use with Laminated Dielectric Cable Rated 2,500V Through 500,000V (Adopted as a National Standard of Canada, CAN/CSA-C22.2 No. 241) Phone: 888-593-3355 www.generalcable.com IEEE 446: IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications (“IEEE Orange Book”) IEEE 493: IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (“IEEE Gold Book”) IEEE 525: IEEE Guide for the Design and Installation of Cable Systems in Substations IEEE 575: IEEE Guide for the Application of Sheath-Bonding Methods for SingleConductor Cables and the Calculation of Induced Voltages and Currents in Cable Sheaths IEEE 576: IEEE Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in the Petroleum and Chemical Industry IEEE 602: IEEE Recommended Practice for Electric Systems in Health Care Facilities (“IEEE White Book”) IEEE 635: IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables IEEE 789: IEEE Standard Performance Requirements for Communications and Control Cables for Application in High Voltage Environments IEEE/ICEA S-135: Power Cable Ampacities NEMA WC 3: Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (ICEA S-19-81) NEMA WC 5: Thermoplastic-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (ICEA S-61-402) NEMA WC 7: Cross-LinkedThermosetting-Polyethylene-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (ICEA S-66-524) NEMA WC 8: Ethylene-PropyleneRubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (ICEA S-68-516) NEMA WC 26: Wire and Cable Packaging NEMA WC 50: Ampacities, Including Effect of Shield Losses for SingleConductor Solid Dielectric Power Cable 15 kV through 69 kV (ICEA P-53-426) NEMA WC 51: Ampacities of Cables in Open-Top Cable Trays (ICEA P-54-440) NEMA WC 52: High Temperature and Electronic Insulated Wire-Impulse Dielectric Testing IEEE 816: IEEE Guide for Determining the Smoke Generation of Solid Materials Used for Insulations and Coverings of Electric Wire and Cable NEMA WC 53: Standard Test Methods for Extruded Dielectric Power, Control, Instru mentation, and Portable Cables (ICEA T-27-581) IEEE 1017: IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable NEMA WC 54: Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test (ICEA T-26-465) IEEE 1018: IEEE Recommended Practice for Specifying Electric Submersible Pump Cable – Ethylene-Propylene Rubber Insulation IEEE 1019: IEEE Recommended Practice for Specifying Electric Submersible Pump Cable – Polypropylene Insulation IEEE 1202: IEEE Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies NEMA WC 55: Instrumentation Cables and Thermocouple Wire (ICEA S-82-552) NEMA WC 57: Standard for Control Cables (ICEA S-73-532) NEMA WC 58: Standard for Portable and Power Feeder Cables for Use in Mines and Similar Applications (ICEA-S-75-381) SPEC A030 April, 2010 Reference Standards NEMA WC 61: Transfer Impedance Testing NEMA WC 62: Repeated Spark/Impulse Dielectric Testing NEMA WC 70: Standard for Non-shielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy (ICEA S-95-658) NEMA WC 71: Standard for Non-shielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electrical Energy (ICEA S-96-659) NEMA WC 74: Standard for Shielded Power Cables Rated 5-46 kV for the Distribution of Electrical Energy (ICEA S-93-639) NFPA 70: National Electrical Code NFPA 70HB: National Electrical Code Handbook NFPA 262: Test for Fire and Smoke Characteristics of Wires and Cables UL 4: Standard for Armored Cable UL 13: Standard for Power-Limited Circuit Cables UL 44: Standard for Rubber-Insulated Wires and Cables UL 62: Standard for Flexible Cord and Fixture Wire UL 83: Standard for ThermoplasticInsulated Wires and Cables UL 1424: Standard for Cables for PowerLimited Fire-Protective-Signaling Circuits UL 486A: Standard for Wire Connectors and Soldering Lugs for Use With Copper Conductors UL 1569: Standard for Metal-Clad Cables UL 486B: Standard for Wire Connectors and Soldering Lugs for Use With Aluminum Conductors UL 486C: Standard for Splicing Wire Connectors UL 486D: Standard for Insulated Wire Connectors for Use With Underground Conductors UL 486E: Standard for Equipment Wiring Terminals for Use With Aluminum and/or Copper Conductors UL 493: Standard for ThermoplasticInsulated Underground Feeder and BranchCircuit Cables UL 1072: Standard for Medium-Voltage Power Cables UL 1084: Standard for Hoistway Cables UL 1277: Standard for Electrical Power and Control Tray Cables With Optional Optical Fiber Members UL 1581: Reference Standard for Electrical Wires, Cables and Flexible Cords UL 1685: Standard for Vertical-Tray FirePropagation and Smoke-Release Test for Electrical and Optical-Fiber Cables UL 1807: Standard for Fire Resistant Cable Coating Materials UL 2029: Standard for Gas/Vapor-Blocked Cable Classified for Use in Class 1 Hazardous (Classified) Locations UL 2225: Cable and Cable Fittings for Use in Hazardous Locations UL 2250: Instrumentation Tray Cable UL 2556: Wire and Cable Test Methods UL Type ITC-HL: Listing for Instrumentation Cable Used in Hazardous Locations UL Type PLTC: Listing for Power-Limited Tray Cables WC: See NEMA listing UL 1309: Standard for Marine Shipboard Cable Phone: 888-593-3355 www.generalcable.com SPEC A055 April, 2010 Checklist for CCW Specifications ® Guideline for Specifying MC-HL Constructions for Class I – Divisions 1, 2 for Zones 1, 2 Installations Instrumentation & Control Cable Voltage Rating ___ 300 V ___ 600 V ___ Number of Conductor Conductor Type-Copper ___ AWG ___ Bare ___ Tinned ___ Thermocouple ___ EX ___ JX ___ KX ___ TX ___ Solid ___ Stranded ___ Class B, concentric ___ Flexible Insulation ___ PVC ___ XLPE Identification Method ___ Color code ___ Numbering Grounding Conductor ___ Size ___ Bare ___ Tinned ___ Insulated Aluminum Mylar Shields ___ Individual (IS) ___ Overall (OS) ___ Individual/Overall (IOS) CCW® Armor ___ PLTC-HL ___ ITC-HL ___ MC ___ MC-HL Jacket ___ PVC ___ Other General Checklist Standards ___ AEIC ___ ABS ___ CSA ___ ICEA ___ IEEE ___ UL ___ Other Testing Procedures ___ AEIC ___ ABS ___ CSA ___ ICEA ___ IEEE ___ UL ___ Other Special Requirements ___ Cold bend/Cold impact ___ Direct burial ___ Flame-retardant ___ Oil-resistant ___ Sunlight-resistant ___ Other Phone: 888-593-3355 www.generalcable.com Power Cable Voltage rating ___ 600 V ___ 2400 V (2.4 kV) ___ 5 kV ___ 8 kV ___ 15 kV ___ 25 kV ___ 35 kV Cable Assembly ___ Cabled VFD (split grounds) ___ Multi-conductor (one ground) ___ Other (special) Conductor Size ___ AWG ___ kcmil Conductor Type ___ Copper ___ Bare ___ Tinned ___ Aluminum Stranding ___ Class B, compact ___ Class B, concentric ___ Other Extruded Conductor Shielding (Medium Voltage only) Insulation ___ EPR ___ XLPE Insulation Level (Medium Voltage only) ___ 100% ___ 133% Extruded Insulation Shielding (Medium Voltage only) Metallic Shield ___ Helically applied copper tape ___ Other Grounding Conductors ___ Bare ___ Insulated ___ Quantity ___ Size Sheath ___ Continuously Corrugated Welded armor (MC-HL) ___ Interlocked armor ___ MC ___ TECK ___ Lead ___ Non-metallic ___ Other Jacket ___ CPE ___ LSZH/XLPO ___ PVC ___ Other Jacket Color ___ Other than standard Temperature rating ___ 90°C ___ 105°C Documentation ___ Certificates of Compliance (CofC) ___ Certified Test Reports (CTR) ___ Drawings ___ Warranties ___ Other Shipping Details ___ Cut lengths ___ Lagging ___ Returnable reels ___ Other Identification Requirements ___ Cable ___ Circuit ___ Reel Note: This checklist must be accompanied by exact system details about the environment and electrical characteristics. SPEC A100 April, 2011 Common Color Sequence Table E1 Color Sequence COND. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BACKGROUND OR BASE COLOR FIRST TRACER COLOR SECOND TRACER COLOR Black - - White - - Red - - Green - - Orange - - Blue - - White Black - Red Black - Green Black - Orange Black - Blue Black - Black White - Red White - Green White - Blue White - Black Red - White Red - Orange Red - Blue Red - COND. NO. BACKGROUND OR BASE COLOR 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 FIRST TRACER COLOR SECOND TRACER COLOR Red Green - Orange Green Red Black White White Black Red Red Black White White Green Black Orange Black White Blue Black White Black Red Green White Red Green Red Black Green Green Black Orange Orange Black Green Blue White Orange Black White Orange White Red Orange Orange White Blue White Red Blue Method 4 All Conductors Black COND. 1st 2nd 3rd 4th 5th CONDUCTOR PRINTING “1-One” “2-Two” “3-Three” “4-Four” “5-Five” Pair cables are Black, White and numbered. Triad cables are Black, White, Red and numbered. Table E2 Color Sequence COND. NO. BACKGROUND OR BASE COLOR TRACER COLOR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Black - Red - Blue - Orange - Yellow - Brown - Red Black Blue Black Orange Black Yellow Black Brown Black Black Red Blue Red Orange Red Yellow Red Brown Red Black Blue Red Blue COND. NO. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ANSI MC 96.1 Conductor Alloy and Color Code BACKGROUND OR BASE COLOR TRACER COLOR Orange Blue Yellow Blue Brown Blue Black Orange Red Orange Blue Orange Yellow Orange Brown Orange Black Yellow Red Yellow Blue Yellow Orange Yellow Brown Yellow Black Brown Red Brown Blue Brown Orange Brown Yellow Brown COND. TYPE EX POSITIVE WIRE ALLOY COLOR Chromel Purple NEGATIVE WIRE ALLOY COLOR Constantan Red OUTER JACKET Purple JX Iron White Constantan Red Black KX Chromel Yellow Alumel Red Yellow TX Copper Blue Constantan Red Blue Pair cables are Black, Red and numbered. Triad cables are Black, Red, Blue and numbered. Colors repeat after 36 conductors. There are no Green or White conductors or stripes. Phone: 888-593-3355 www.generalcable.com SPEC A150 September, 2010 Metric Conversion Factors To Convert From Inches Millimeters To Millimeters Inches Multiply By 25.4 0.03937 Length Inches Centimeters Centimeters Inches 2.54 0.3937 Feet Meters Meters Feet 0.3048 3.2808 Kilofeet (1000 feet) Kilometers Square Inches Square Millimeters Kilometers Kilofeet (1000 feet) Square Millimeters Square Inches 0.3048 3.2808 645.16 0.00155 Square Inches Square Centimeters Square Centimeters Square Inches 6.4516 0.155 Area Square Inches Circular Mils Circular Mils Square Inches 1,273,240 7.854 x 10-7 Circular Mils Square Millimeters Square Millimeters Circular Mils 5.066 x 104 1973.51 Weight Square Feet Square Meters Pounds Kilograms Square Meters Square Feet Kilograms Pounds 0.0929 10.764 0.4536 2.2046 Pound/Kilofeet Kilograms/Kilometer Ohms/Kilofeet Ohms/Kilometer Kilograms/Kilometer Pounds/Kilofeet Ohms/Kilometer Ohms/Kilofeet 1.4882 0.6720 3.2808 0.3048 Electrical Microfarads/Kilofeet Microfarads/Kilometer Microfarads/Kilometer Microfarads/Kilofeet 3.2808 0.3048 Mechanical Insulation Resistance: Megohms—Kilofeet Megohms—Kilometer Pounds/Square Inch Kilo Pascal* Pounds (force) Megohms—Kilometer Megohms—Kilofeet Kilo Pascal* Pounds/Square Inch Newtons 0.3048 3.2808 6.895 0.1432 4.448 * 1 Pascal = 1 Newton/square meters Phone: 888-593-3355 www.generalcable.com SPEC A185 September, 2010 AWG (American Wire Gauge) to mm2 (Millimeters Squared) Conversion AWG to mm² CONVERSION TABLE mm² to AWG CONVERSION TABLE AWG/kcmil [mm²]* mm² [mm²] * AWG/kcmil 20 18 16 14 12 10 8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 800 1000 0.52 0.82 1.31 2.08 3.31 5.26 8.36 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107 127 152 177 203 228 253 304 380 405 507 0.5 0.75 1.5 2.5 2.5 4 6 10 16 25 35 35 50 70 95 95 120 120 150 185 185 240 240 300 400 400 500 0.52 0.82 1.31 2.08 3.31 3.31 5.26 8.36 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107 107 127 152 177 203 228 253 304 380 405 507 20 18 16 14 12 12 10 8 6 4 2 1 1/0 2/0 3/0 4/0 4/0 250 300 350 400 450 500 600 750 800 1000 * Equivalent mm2 cross-sectional area Multiple AWG choices — consult responsible engineer for required ampacity Phone: 888-593-3355 www.generalcable.com SPEC B025 March, 2012 Class B Conductors for General Wiring Copper Conductor ASTM CLASS B NOMINAL WEIGHT LBS/1000 FT¹ kg/km CONCENTRIC NOMINAL O.D. INCHES mm COMPRESSED NOMINAL O.D. INCHES mm COMPACT NOMINAL O.D. INCHES mm COND. SIZE AWG/kcmil STRANDING INCHES NOMINAL AREA CIRCULAR MILS mm² 22 7/.0096 640 0.32 1.99 2.96 0.029 0.74 — — — — 20 7/.0121 1,020 0.52 3.15 4.69 0.036 0.91 — — — — 18 7/.0152 1,620 0.82 5.10 7.59 0.046 1.17 — — — — 16 7/.0192 2,580 1.31 7.74 11.52 0.058 1.47 — — — — 14 7/.0242 4,110 2.08 12.70 18.90 0.073 1.84 0.071 1.80 — — 12 7/.0305 6,530 3.31 20.20 30.10 0.092 2.32 0.089 2.26 — — 10 7/.0385 10,380 5.26 32.10 47.80 0.116 2.95 0.113 2.87 — — 8 7/.0486 16,510 8.36 51 75.90 0.146 3.71 0.142 3.60 0.134 3.40 6 7/.0612 26,240 13.30 81.10 120.70 0.184 4.67 0.178 4.53 0.169 4.29 4 7/.0772 41,740 21.20 129 192 0.232 5.89 0.225 5.72 0.213 5.41 2 7/.0974 66,360 33.60 205 305.10 0.292 7.42 0.283 7.19 0.268 6.81 1 19/.0664 83,690 42.40 258 383.90 0.332 8.43 0.322 8.18 0.299 7.59 1/0 19/.0745 105,600 53.50 326 485.10 0.373 9.47 0.362 9.19 0.336 8.53 2/0 19/.0837 133,100 67.40 411 611.60 0.419 10.64 0.406 10.32 0.376 9.55 3/0 19/.0940 167,800 85 518 770.90 0.470 11.94 0.456 11.58 0.423 10.74 4/0 19/.1055 211,600 107 653 971.80 0.528 13.41 0.512 13.01 0.475 12.07 250 37/.0822 250,000 127 772 1148.90 0.575 14.61 0.558 14.17 0.520 13.21 300 37/.0900 300,000 152 926 1378 0.630 16.00 0.611 15.52 0.570 14.48 350 37/.0973 350,000 177 1,081 1609 0.681 17.30 0.661 16.78 0.616 15.65 400 37/.1040 400,000 203 1,235 1838 0.728 18.49 0.706 17.94 0.659 16.74 500 37/.1162 500,000 253 1,544 2298 0.813 20.65 0.789 20.03 0.736 18.69 600 61/.0992 600,000 304 1,883 2802 0.893 22.68 0.866 22.00 0.813 20.65 750 61/.1109 750,000 380 2,316 3447 0.998 25.35 0.968 24.59 0.908 23.06 1000 61/.1280 1,000,000 507 3,088 4595 1.152 29.26 1.117 28.38 1.060 26.92 Dimensions and weights are nominal; subject to industry tolerances. ¹ Nominal conductor weights are applicable for Concentric Class B and Compressed Stranding per ASTM B8. Phone: 888-593-3355 www.generalcable.com SPEC D005 March, 2012 Recommended Reel Handling Practices How to Handle Cable Reels YES NO Cradle both reel flanges between forks. Do not lift by top flange. Cable or reel will be damaged Reels can be hoisted with a shaft extended through both flanges.. Use a spreader bar to prevent bending the reel flanges and mashing the cable. Place spacers under the bottom flange and between reels to create a space to insert the forks. (36" reels max.) Upended heavy reels will often arrive damaged. Refuse or receive subject to inspection for hidden damage. Lower reels from truck using hydraulic gate, hoist or fork lift. LOWER CAREFULLY. Never allow forks to touch cable surface or reel wrap. Always load with flanges on edge and chock and block securely. Never drop reels. Phone: 888-593-3355 www.generalcable.com SPEC D025 October, 2011 Recommended Cable Handling Practices Unloading and Moving of Reels: Cable reels are never shipped upended (flat side down). Cable reels that arrive in this manner should be rejected or received only after a thorough inspection for damage. See “Recommended Reel Handling Practices” page. Upon receipt, a cable’s protective covering and/or lagging should be inspected for evidence of damage during shipment. If evidence of damage is found, a report should immediately be made to the carrier. Under no circumstances should reels be dropped from the delivering vehicle to the ground. Unloading and reel handling should be accomplished so that the equipment used does not contact the cable surface, and in the case of protective wrap, that the equipment does not contact the protective wrap. If unloading and reel handling is accomplished by crane, either a cradle supporting the reel flanges or a shaft through the arbor hole should be used. If a fork lift is utilized, the forks must lift the reel at 90˚ to the flanges and the forks must be long enough to make complete lifting contact with both flanges. Under no circumstances should the forks come into contact with the cable surface or the protective wraps. When a reel of cable is rolled from one point to another, care must be taken to see that there are no objects on the surface area which could contact or damage the cable surface or protective wrap. If an inclined ramp is used for unloading, the ramp must be wide enough to contact both flanges completely. The stopping of the reels at the bottom shall be accomplished by using the reel flanges and not the surface of the cable. Minimum Drum Diameters for Packaging Cables Type of Cable Minimum Drum Diameter as a Multiple of Outside Diameter of Cable 1. Single and multiple conductor cable - unshielded 0-2000 V 10 2. Single and multiple conductor cable - unshielded 2400 V 12 3. Single and multiple conductor cable - wire shield (UniShield ) 5-35 kV 12 4. Single and multiple conductor cable - helically applied tape shield (Uniblend ) 5-35 kV 14 5. Single and multiple conductor cable - longitudinally applied flat tape shield (Type TC) 20 ® ® 6. Single and multiple conductor cable - Interlocked Armor (Duralox ) 600 V-35 kV 14 7. Triplexed single conductors cabled together. The circumscribing overall diameter* shall be multiplied by the factor in 1 - 6 and then by the reduction factor. .75 ® *Single conductor times 2.155 times NEMA WC26 EEMAC201-2007 Binational Wire and Cable Packaging Standard Phone: 888-593-3355 www.generalcable.com SPEC D050 November, 2011 Recommended Cable Storage Practices Storage and Storage Maintenance: Finished cables have no established shelf-life. Moisture and atmospheric conditions can cause exposed conductors to oxidize and discolor. Uncovered/unsheltered cable will degrade due to exposure to direct sunlight and/or the elements. If the cables are protected, there should be no degradation of the insulation. In general, any cable for use indoors should be stored indoors. Any cable suitable for installation outdoors is suitable for storage outdoors. Cables stored outdoors should have the ends sealed to prevent moisture ingress into the cable and should be used within two years or less. Cables should be stored in a sheltered area. Cables with a cold temperature marking, e.g. –10˚C, –25˚C, or –40˚C, may be stored outdoors. Cables without a cold temperature marking must be stored indoors. Cable reels must remain in the upright position. Cable reels must not be stored on their sides. Reels must not be stacked. Cable reels should be stored with the protective covering or lagging in place. If a length of cable has been cut from the reel, the cable end should be immediately resealed to prevent the entrance of moisture. If a part length is returned to storage, the reel’s protective covering should be restored. Wooden reels should be stored off the ground to prevent rotting. Reels should be stored on a flat, hard surface so that flanges do not sink into the earth. The weight of the reel and cable must be carried at all times by the reel flanges. Cable reels and lagging must not be stored for an extended time period sitting in direct contact with water or dampness. Timbers or metal supports must be placed under the reel flanges to provide elevated storage of the reels away from the direct contact with water or damp soil. Reels should be stored in an area where construction equipment, falling or flying objects or other materials will not contact the cable. Cable should be stored in an area where chemicals or petroleum products will not be spilled or sprayed on the cable. Cable should be stored in an area away from open fires or sources of high heat. If the reels are relocated, they should be handled as suggested in the “Recommended Reel Handling Practices” section, and inspection made on each reel during the relocation. If the cables are stored in a secure area and not exposed to the effects of the weather, an annual inspection should be satisfactory. Where the reels are exposed to the weather, a bimonthly inspection should be performed to observe any sign of deterioration. If the reels are exposed in a non-secure area, policing of the area at frequent intervals may be required depending on circumstances. Records of delivery date, manufacturer, installation date, any extenuating circumstances, along with all test reports, should be kept on file. Phone: 888-593-3355 www.generalcable.com SPEC E005 April, 2010 Pre-Installation Instructions Pre-Installation Overview Cable Inspection Cabling Handling To ensure safety during cable installation and reliability once the cable is installed, you should confirm the following prior to installation: Inspect every cable reel for damage before accepting the shipment. Be particularly alert for cable damage if: Remove all nails and staples from the reel flanges before moving a reel, and avoid all objects that could crush, gouge or impact the cable when moving. NEVER use the cable as a means to move a reel. • The cable selected is proper for your application • Several reels are stacked • The cable has not been damaged in transit or storage Review all applicable state and national codes to verify that the cable chosen is appropriate for the job. Also, consult your local building authority. Next, you must identify any existing cable damage and prevent any further damage from occurring. This is done through proper cable inspection, handling and storage. Phone: 888-593-3355 www.generalcable.com • A reel is laying flat on its side • Other freight is stacked on a reel • Nails have been driven into reel flanges to secure shipping blocks • A reel flange is damaged • A cable covering is removed, stained or damaged • A cable end seal is removed or damaged • A reel has been dropped (hidden damage likely) When unreeling, observe recommended bending radii, use swivels to prevent twisting and avoid overruns. SPEC E050 April, 2010 Installation—Feed-In Setups Cable Feed-In Setups The following diagrams illustrate various cable feed-in setups: Apply lube here Guide-in tube Reels on truck Setup for duct close to floor Setup for overhead, into tray The feed-in setup should unreel the cable with a natural curvature (Figure 1) as opposed to a reverse “S” curvature (Figure 2). PROPER Figure 1 IMPROPER Figure 2 Phone: 888-593-3355 www.generalcable.com SPEC E050 April, 2010 Installation—Feed-In Setups Cable Feed-In Setups (continued) Single Sheave Single sheaves should only be used for GUIDING cables. Arrange multiple blocks to maintain bending radii whenever cable changes direction or elevation. For pulling around bends, use conveyor sheave assemblies of the appropriate radius series. Sheave Assembly The pulleys must be positioned to ensure that the effective curvature is smooth and changes direction or elevation evenly at each pulley. Never allow a polygon curvature to occur (Figure 3). The fit of a pulley around the cable is also important when pulling heavy weights (i.e. pulleys at the top of a vertical drop). NEVER ALLOW Figure 3 Remember to use the radius of the surface over which the cable is bent, not the outside flange diameter of the pulley. A “10 inch” cable sheave typically has a 10 inch outside flange diameter with a 6 inch inside diameter that provides an inside (bending) radius of 3 inches. Radius Phone: 888-593-3355 www.generalcable.com SPEC E075 March, 2012 Installation—Conductor Maximum Pulling Tensions Multiconductor Cables Having Equal-Sized Conductors; In Parallel or as Multiplexed Assemblies MAXIMUM ALLOWABLE PULLING TENSION (LBS) NUMBER OF CONDUCTORS AWG/kcmil 1 2 3 4 5 6 18 16 14 12 10 8 6 4 2 1 1/0 2/0 13 20 33 26 40 66 39 60 99 41 65 105 52 81 132 62 97 158 52 83 132 104 166 264 157 249 396 167 266 423 209 332 528 251 399 634 210 334 531 420 668 1062 630 1002 1593 672 1069 1699 840 1336 2124 1008 1603 2548 670 845 1065 1339 1690 2130 2009 2534 3194 2142 2703 3407 2678 3379 4259 3214 4055 5111 1342 1693 2000 2685 3386 4000 4027 5078 6000 4296 5417 6400 5370 6771 8000 6444 8125 9600 2800 4000 6000 5600 8000 10000 8400 10000 10000 8960 10000 10000 10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 3/0 4/0 250 350 500 750 1000 The maximum allowable pulling tensions are for direct attachment to the conductor. T = 0.008 x cmil x n, if n ≤ 3 T = 0.008 x cmil x n x 0.8, if n > 3 When more than two conductors are pulled in parallel in an installation containing bends, the maximun allowable pulling tension is limited to the two conductor column, regardless of the number of conductors that are being pulled. Phone: 888-593-3355 www.generalcable.com SPEC E075 March, 2012 Installation—Conductor Maximum Pulling Tensions Multiconductor Cables Having Equal-Sized Conductors, Without Subassemblies MAXIMUM ALLOWABLE PULLING TENSION (LBS) CONDUCTOR SIZE (AWG/kcmil) NUMBER OF CONDUCTORS 18 16 14 12 10 2 3 4 26 39 41 40 60 65 66 99 105 104 157 167 166 249 266 5 6 7 52 62 73 83 93 104 81 97 113 132 158 184 209 251 293 332 399 465 129 145 161 210 237 263 334 376 418 531 598 664 8 9 10 12 14 15 194 226 242 316 368 395 502 585 627 797 930 996 16 18 19 124 145 156 166 187 197 258 290 306 421 473 500 669 752 794 20 22 24 207 228 249 323 355 387 526 549 631 836 919 1000 1000 1000 1000 1000 1000 1000 25 30 37 259 311 383 403 484 596 658 789 974 1000 1000 1000 1000 1000 1000 The maximum allowable pulling tensions are for multi-conductor cables pulled into a raceway or cable tray using a basket grip or similar device secured directly to the cable jacket.It is recommended that a combination of basket grips and pulling eyes be used whenever possible. T = 0.008 x cmil x n, if n ≤ 3 T = 0.008 x cmil x n x 0.8, if n > 3 Phone: 888-593-3355 www.generalcable.com SPEC E100 April, 2010 Installation—Training and Bending Limitations Physical Limitations Training and Bending Overview Training is the positioning of cable when it is not under tension. Bending is the positioning of cable when it is under tension. When installing cable, the object is to limit the mechanical forces so that the cable’s physical and electrical characteristics are maintained for the expected service life. Bends in conductors, multi-conductor cables or assemblies of conductors shall be made so that the cable will not be damaged. A nonshielded cable can tolerate a sharper bend than a shielded cable. This is especially true for cables having helically applied metallic shielding tapes which, when bent too sharply, can separate or buckle and cut into the insulation. Remember that offsets are bends. The problem is compounded by the fact that most tapes are under jackets that conceal such damage. The extruded polymers used for insulation shields have sufficient conductivity and coverage initially to pass acceptance testing, then fail prematurely due to corona at the shield/insulation interface. Minimum Bending Radius in Accordance with National Electric Code Voltage Conductors Shielding Cable Types 600 V 6012000 V Single Nonshielded All 5X All 8X Nonshielded TC or TC-ER 600 V or 2000 V Multiconductor or Multiplexed Over 2000 V 1 3 2 1 in. (25 mm) or less 4X MC3 Shielded Single Minimum Bending Radius as a Multiple of Conductor/Assembly Diameter Nonshielded Shielded MultiNonshielded conductor or Shielded Multiplexed Over 1 in. to 2 in. (>25 mm to 50 mm) Over 2 in. (>50 mm) 5X 6X 7X All 12X TC or TC-ER 12X MC 12X/7X1 MV MC 3 MC and MV MC and MV MC and MV 8X 7X 12X 2 8X 1,2 12X/7X 12 times the diameter of an individual shielded conductor or 7 times the overall cable diameter, whichever is greater. Since UniShield is a unique construction, there are no applicable values for the bending radius in the NEC. However, General Cable recommends 8 times for single conductors, and for multiplexed or multi-conductor cables, it is 8 times the diameter of the individual conductors or 5 times the overall diameter, whichever is greater, in accordance with ANSI/ICEA S-93-639 5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy. Per 330.24B Interlocked-Type Armor or Continuously Corrugated Metallic Sheath. ® Phone: 888-593-3355 www.generalcable.com SPEC E125 October, 2012 Installation—Maximum Sidewall Pressure Overview Sidewall bearing pressure (SWBP), or sidewall loading, is the radial force exerted on a cable being pulled around a conduit bend or sheave. Excessive SWBP can crush a cable and is, therefore, one of the most restrictive factors in installations having bends and requiring high pulling tensions. SWBP is reduced by increasing the radius of bends. Tension The maximum tension that can safely be applied to the cable during installation can be calculated using the maximum SWBP for the cable and the radius of the bend it is traversing. For example, a cable having a maximum SWBP of 300 lb/ft that is being pulled around a bend having a radius of 2 feet should have no more than 300 lbs/ft x 2 ft or 600 lbs tension applied to it as the cable exits the bend. Sidewall Load CABLE TYPE 300 V Nonshielded, 300 V and 600 V Shielded Control & Instrumentation 600 V Nonshielded Control & Instrumentation 600 V and 2400 V Nonshielded Power 5 kV-35 kV Shielded Power Interlocked Armored Cable (all voltage) CCW® MC-HL Armored Cable SWBP (LBS/FT) 500 500 1000 1000 300 500 General Cable’s Approval List of Cable Pulling Lubricants The following manufacturers, who are listed in the 2006 UL Electrical Construction Equipment Directory, provide wire pulling compounds intended for use as lubricants in installing electrical conductors in raceways. These manufacturers have had some of their products evaluated by Underwriters Laboratories (UL) to determine their compatibility with conductor insulation and coverings. Since it is not feasible to test every possible combination of cable material with every wire pulling compound, the installer should check with the pulling compound manufacturer or the cable manufacturer to determine compatibility between specific cable materials and the pulling compound. The Listing Mark for these products includes the UL symbol, together with the word “LISTED,” a control number and the product name “Wire Pulling Compound.” Refer to the latest edition of the UL Electrical Construction Equipment Directory for the current listing of manufacturers of wire pulling compounds and their control numbers. 3M Company American Bentonite International Inc. American Polywater Corp. Arnco Corp. Dura-Line Corp. Greenlee Textron Ideal Industries Inc.* J. C. Whitlam Mfg. Co. Klein Tools Inc. Madison Electric Products Inc. Rainbow Technology Corp. Rectorseal Thomas & Betts Corp. *Yellow 77 not recommended for use with UniShield® cables. For LSZH jacketed cable, consult with pulling compound manufacturers. Other wire pulling compounds may be suitable for use with General Cable constructions. Contact the wire pulling compound manufacturer regarding the suitability of their products with specific General Cable products. Phone: 888-593-3355 www.generalcable.com SPEC F005 April, 2010 DC “HI-POT” Pre-Test Guidelines for MV Cables The test voltage should be increased in steps of 10 kV, or minimum of 5 steps. The duration at each step should be long enough for the current to reach a steady value (1 minute suggested). The test current will momentarily increase for each voltage increment due to charging of the capacitance and the dielectric absorption characteristics of the insulation. Stabilized current should be recorded at each step. The maximum test voltage should be maintained for 15 minutes (new cable, shielded) / 5 minutes (non-shielded). Leakage current should be recorded each minute after the maximum test voltage has been reached. Increase of leakage current at any step point may be an indication of a cable insulation problem. Failure of the cable or cable accessories may result unless the voltage is rapidly reduced. Otherwise, the leakage current should stabilize after about 5 minutes. Leakage current is essentially a function of the construction and length of cable but it can be influenced by the test conditions (wind and humidity) as well as the test apparatus (leads). Typical leakage currents in the order of 100 – 150 microamperes or higher are not unusual. A defective installation is identified by increasing leakage current with time, at a fixed DC voltage. All testing should be performed by qualified personnel taking all appropriate safety precautions. Phone: 888-593-3355 www.generalcable.com SPEC F025 April, 2010 DC “HI-POT” Testing Guidelines for MV Cables DC High Potential (HI-POT) Testing of Medium-Voltage Power Cable Overview This procedure is intended to provide general guidelines for high potential DC testing of power cables. All tests made after cable installation and during the guarantee period shall be made in accordance with applicable specifications. All safety precautions must be observed during testing at high voltage. Read and understand and follow the Operator’s Manual for the particular test set being used! Test Equipment Direct current test equipment is available commercially with a wide range of voltages. Accessory equipment necessary to safely conduct high voltage tests—such as safety barriers, rubber gloves and nonconducting hard hats—must be used; consult appropriate safety officer. Test Procedures See IEEE Standard 400 Article 5 Direct Voltage Testing. Acceptable procedures, although varying slightly in technique, have more or less been standardized as either a “withstand test” or a “time-leaking current test.” Phone: 888-593-3355 www.generalcable.com Before performing any DC overpotential tests: • All equipment must be disconnected from the cable circuit, i.e., taps, motors, circuit breakers, surge arrestors, etc. This will preclude damage to such equipment and will prevent test interruptions due to flashovers and/or trip-outs resulting from excessive leakage current. • Establish adequate clearance between the circuit test ends and any grounded object, and to other equipment not under test (about 2.5 feet). • Ground all circuit conductors not under test with all cable shields including nearby equipment. • Consult termination manufacturers for maximum test voltage recommendations and time limitations. The direct current test voltage may be applied either continuously or in predetermined steps to the maximum value in accordance with applicable specifications. • Continuous Method – Apply test voltage at an approximate rise rate of 1 kV per second or 75% of the rated current output of the equipment, whichever is less. Some equipment will take longer to reach the maximum test voltage because of the amount of charging current. • Step Method – Apply test voltage slowly in 5 to 7 increments of equal value to the maximum specified. Allow sufficient time at each stop for the leakage current to stabilize. HI-POT TESTING PROCEDURES Normally this requires only a few seconds unless cable circuits of high capacitance are involved. Record leakage current at each step. Maintain the test voltage at the prescribed value for the time designated in applicable specifications. The following times are usually considered adequate: at the end of the test period, set the test set voltage control to zero, allow the residual voltage on the circuit to decay, then ground the conductor just tested. CAUTION It should be recognized that DC charges on cable can build up to potentially dangerous levels if grounds are removed too quickly. Maintain solid grounds after the test on the cable for at least 4 times the duration of the test. On exceptionally long cable lengths, it may be necessary to increase the grounding time. It is advantageous to maintain these grounds longer and while reconnecting circuit components. • Acceptance Testing – After installation and before the cable is placed in regular service, the specified test voltage shall be applied for 15 consecutive minutes. • Proof Testing – At any time during the period of guarantee, the cable circuit may be removed from service and tested at a reduced voltage (normally 65 percent of the original acceptance value) for 5 consecutive minutes. • Record the leakage current at one minute intervals for the duration of the test time involved. SPEC F025 April, 2010 DC “HI-POT” Testing Guidelines for MV Cables DC High Potential (HI-POT) Testing of Medium-Voltage Power Cable Comments The significance of conducting DC high-voltage tests on nonshielded, nonmetallic-sheathed cable is dependent upon the environment in which it is installed because the characteristics of the return circuits are unknown. The environment must be carefully considered or test results may not be significant. In fact, these tests can result in damage to the cable insulation. Humidity, condensation and actual precipitation on the surface of a cable termination can increase the leakage current by several orders of magnitude. Humidity also increases the corona current, which indication is included in the total leakage current. Wind prevents the accumulation of space charges at all bare energized terminals. This results in an increase of corona. It is most desirable to reduce or eliminate corona current at the bare metal extremities of cable or terminations. This may be accomplished by covering these areas with plastic envelopes, plastic or glass containers, plastic wrap or suitable electrical putty. Routine periodic DC maintenance testing of cable for the evaluation of the insulation strength is not a common practice. Some power cable users have adopted a program of testing circuits during planned outages, preferring possible breakdowns during testing rather than experiencing a service outage. It is nearly impossible to recommend test voltage values for those maintenance tests with the history of the cable circuit. An arbitrary test voltage level could break down a cable circuit that would otherwise render long trouble-free service at normal operating AC voltage. The main usefulness of DC high-voltage testing is to detect conducting particles left on the creepage surface during splicing or termination. Test equipment should be supplied from a stable, constant voltage source. Do not use the same source that is supplying arc welders or other equipment causing line voltage fluctuations. The output voltage of the test set must be filtered and regulated. Consider using a portable, motor-driven alternator to energize the test set. Testing Problems Extra Leakage Current: • Failure to guard against corona • Failure to clean insulation surface • Failure to keep cable ends dry • Failure to provide adequate clearance to ground • Improper shield termination Erratic Readings: • Fluctuating voltage to test set • Improper test leads Environmental Influences: • High relative humidity • Dampness, dew, fog • Wind, snow Results vs. Cable Life To date there is no basis for correlation between DC test results and cable life expectancy. The gradual decrease or non-increase of leakage current with respect to time at maximum test voltage is the acceptance criteria for DC HI-POT testing. Phone: 888-593-3355 www.generalcable.com SPEC F075 April, 2010 Field Electrical “HI-POT” Testing Guidelines Acceptance Testing Acceptance testing is performed to detect any defects in cable insulation and terminations which may have resulted from poor workmanship or mechanical damage. This proof test confirms the integrity of the insulation and accessories before the cable is placed into service. After installation and before the cable is placed in regular service, the test voltages specified in the ICEA S-97-682 Table should be applied for 15 consecutive minutes. Record the leakage current at one minute intervals for the duration of the test. ICEA DC Field Test Voltages ICEA S-97-682 Utility Shielded Power Cables Rated 5,000-46,000 Volts Rated Voltage Phaseto-Phase (kV) 5 8 15 25 Maximum DC Field Test Voltages (kV) Nominal Insulation Thickness (Insulation Level) Conductor Size 100% During or After Installation 133% 100% 133% 100% 133% 28 36 9 11 36 44 11 14 5.59 56 64 18 20 320 8.13 80 96 25 30 AWG/kcmil mm 2 8 - 1000 8.4 - 507 90 2.29 115 2.92 > 1000 > 507 140 3.56 140 3.56 6 - 1000 13.3 - 507 115 2.92 140 3.56 > 1000 > 507 175 4.45 175 4.45 2 - 1000 33.6 - 507 175 4.45 > 1000 > 507 220 5.59 220 1 - 2000 42.4 - 1013 260 6.60 mils mm First 5 Years mils mm 28 1 - 2000 42.4 - 1013 280 7.11 345 8.76 84 100 26 31 35 1/0 - 2000 53.5 - 1013 345 8.76 420 10.7 100 124 31 39 46 4/0 - 2000 107.2 - 1013 445 11.3 580 14.7 132 172 41 54 DC test voltages are applied to discover gross problems such as improperly installed accessories or mechanical damage. DC testing is not expected to reveal deterioration due to aging in service. There is some evidence that DC testing of aged cross-linked polyethylene cables can lead to early cable failures. Information on this subject is available in EPRI project report TR-101245, “Effect of DC Testing in Extruding Cross-Linked Polyethylene Insulated Cables. Dimensions and weights are nominal; subject to industry tolerances. Phone: 888-593-3355 www.generalcable.com SPEC F130 December, 2010 CCW Sheath as a Grounding Conductor ® CCW® DIAMETER INCHES ALUMINUM CROSSSECTIONAL AREA kcmil EQUIVALENT ALUMINUM CONDUCTOR CCW® 10 CYCLE FAULT CAPABILITY* (kA) CCW® DIAMETER INCHES ALUMINUM CROSSSECTIONAL AREA kcmil EQUIVALENT ALUMINUM CONDUCTOR CCW® 10 CYCLE FAULT CAPABILITY* (kA) 0.49 26.39 6 2.84 1.75 206.72 3/0 22.28 0.53 30.79 6 3.32 1.85 209.67 3/0 22.60 0.58 33.46 5 3.60 1.90 220.01 4/0 23.71 0.62 35.19 5 3.79 1.96 233.29 4/0 25.14 0.67 39.58 5 4.27 2.03 257.96 250 27.80 0.71 43.98 4 4.74 2.15 291.60 250 31.43 0.75 47.50 4 5.11 2.28 310.83 300 33.50 0.80 51.89 4 5.59 2.32 314.03 300 33.85 0.84 55.42 3 5.97 2.40 355.94 350 38.36 0.89 58.94 3 6.35 2.45 362.85 350 39.11 0.93 61.58 3 6.64 2.53 371.49 350 40.04 0.97 65.97 3 7.11 2.58 378.40 350 40.78 1.02 66.85 2 7.21 2.62 387.04 350 41.72 1.06 69.49 3 7.49 2.75 407.78 400 43.94 1.11 94.56 1 10.19 2.85 454.12 400 48.94 1.15 98.96 1 10.67 2.98 474.51 400 51.15 1.19 101.16 1 10.90 3.03 483.77 400 52.14 1.24 104.46 1 11.26 3.11 491.19 400 52.94 1.29 108.86 1/0 11.73 3.16 502.31 500 54.14 1.34 123.75 1/0 13.33 3.32 530.11 500 57.13 1.37 132.32 1/0 14.26 3.41 537.53 500 57.93 1.42 136.00 2/0 14.66 3.63 559.77 550 60.33 1.47 142.13 2/0 15.32 3.67 578.30 550 62.32 1.51 145.80 2/0 15.71 3.80 598.69 550 64.53 1.60 174.26 3/0 18.75 3.98 630.20 600 67.92 1.64 179.67 3/0 19.36 4.10 650.59 650 70.12 1.69 185.07 3/0 19.95 *Short Circuit Capacity based on ICEA P-45-482 Phone: 888-593-3355 www.generalcable.com Index January, 2013 Part Number Index PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER 9025.16010001..... SPEC 9025 9025.16010002..... SPEC 9025 9025.16010003..... SPEC 9025 9025.16010004..... SPEC 9025 9050.20041221..... SPEC 9050 9050.20041222..... SPEC 9050 9050.20041223..... SPEC 9050 9050.20041224..... SPEC 9050 9050.20081221..... SPEC 9050 9050.20081222..... SPEC 9050 9050.20081223..... SPEC 9050 9050.20081224..... SPEC 9050 9050.20101221..... SPEC 9050 9050.20101222..... SPEC 9050 9050.20101223..... SPEC 9050 9050.20101224..... SPEC 9050 9050.20121221..... SPEC 9050 9050.20121222..... SPEC 9050 9050.20121223..... SPEC 9050 9050.20121224..... SPEC 9050 9050.20161221..... SPEC 9050 9050.20161222..... SPEC 9050 9050.20161223..... SPEC 9050 9050.20161224..... SPEC 9050 9050.20201221..... SPEC 9050 9050.20201222..... SPEC 9050 9050.20201223..... SPEC 9050 9050.20201224..... SPEC 9050 9050.20241221..... SPEC 9050 9050.20241222..... SPEC 9050 9050.20241223..... SPEC 9050 9050.20241224..... SPEC 9050 9050.20361221..... SPEC 9050 9050.20361222..... SPEC 9050 9050.20361223..... SPEC 9050 9050.20361224..... SPEC 9050 9050.20501221..... SPEC 9050 9050.20501222..... SPEC 9050 9050.20501223..... SPEC 9050 9050.20501224..... SPEC 9050 9075.20041221..... SPEC 9075 9075.20041222..... SPEC 9075 9075.20041223..... SPEC 9075 9075.20041224..... SPEC 9075 9075.20081221..... SPEC 9075 9075.20081222..... SPEC 9075 9075.20081223..... SPEC 9075 9075.20081224..... SPEC 9075 9075.20101221..... SPEC 9075 9075.20101222..... SPEC 9075 9075.20101223..... SPEC 9075 9075.20101224..... SPEC 9075 9075.20121221..... SPEC 9075 9075.20121222..... SPEC 9075 9075.20121223..... SPEC 9075 9075.20121224..... SPEC 9075 9075.20161221..... SPEC 9075 9075.20161222..... SPEC 9075 9075.20161223..... SPEC 9075 9075.20161224..... SPEC 9075 9075.20201221..... SPEC 9075 9075.20201222..... SPEC 9075 9075.20201223..... SPEC 9075 9075.20201224..... SPEC 9075 9075.20241221..... SPEC 9075 9075.20241222..... SPEC 9075 9075.20241223..... SPEC 9075 9075.20241224..... SPEC 9075 9075.20361221..... SPEC 9075 9075.20361222..... SPEC 9075 9075.20361223..... SPEC 9075 9075.20361224..... SPEC 9075 9075.20501221..... SPEC 9075 9075.20501222..... SPEC 9075 9075.20501223..... SPEC 9075 9075.20501224..... SPEC 9075 9125.16010001..... SPEC 9125 9125.16010002..... SPEC 9125 9125.16021201..... SPEC 9125 9125.16021202..... SPEC 9125 9125.16041201..... SPEC 9125 9125.16041202..... SPEC 9125 9125.16081201..... SPEC 9125 9125.16081202..... SPEC 9125 9125.16121201..... SPEC 9125 9125.16121202..... SPEC 9125 9125.16161201..... SPEC 9125 9125.16161202..... SPEC 9125 9125.16241201..... SPEC 9125 9125.16241202..... SPEC 9125 9125.16361201..... SPEC 9125 9125.16361202..... SPEC 9125 9125.16501201..... SPEC 9125 9125.16501202..... SPEC 9125 9150.16010001..... SPEC 9150 9150.16010002..... SPEC 9150 9150.16021201..... SPEC 9150 9150.16021202..... SPEC 9150 9150.16041201..... SPEC 9150 9150.16041202..... SPEC 9150 9150.16081201..... SPEC 9150 9150.16081202..... SPEC 9150 9150.16121201..... SPEC 9150 9150.16121202..... SPEC 9150 9150.16161201..... SPEC 9150 9150.16161202..... SPEC 9150 9150.16241201..... SPEC 9150 9150.16241202..... SPEC 9150 9150.16361201..... SPEC 9150 9150.16361202..... SPEC 9150 9150.16501201..... SPEC 9150 9150.16501202..... SPEC 9150 9225.16010001..... SPEC 9225 9225.16010002..... SPEC 9225 9225.16021221..... SPEC 9225 9225.16041221..... SPEC 9225 9225.16041222..... SPEC 9225 9225.16061221..... SPEC 9225 9225.16081221..... SPEC 9225 9225.16081222..... SPEC 9225 9225.16101221..... SPEC 9225 9225.16121221..... SPEC 9225 9225.16121222..... SPEC 9225 9225.16161221..... SPEC 9225 9225.16161222..... SPEC 9225 9225.16201221..... SPEC 9225 9225.16241221..... SPEC 9225 9225.16241222..... SPEC 9225 9225.16361221..... SPEC 9225 9225.16361222..... SPEC 9225 9225.16501221..... SPEC 9225 9225.18021221..... SPEC 9225 9225.18041221..... SPEC 9225 9225.18041222..... SPEC 9225 9225.18061221..... SPEC 9225 9225.18081221..... SPEC 9225 9225.18081222..... SPEC 9225 9225.18101221..... SPEC 9225 9225.18121221..... SPEC 9225 9225.18121222..... SPEC 9225 9225.18161221..... SPEC 9225 9225.18161222..... SPEC 9225 9225.18201221..... SPEC 9225 9225.18241221..... SPEC 9225 9225.18241222..... SPEC 9225 9225.18361221..... SPEC 9225 9225.18361222..... SPEC 9225 9225.18501221..... SPEC 9225 9225.20021221..... SPEC 9225 9225.20041221..... SPEC 9225 9225.20041222..... SPEC 9225 9225.20061221..... SPEC 9225 9225.20081221..... SPEC 9225 9225.20081222..... SPEC 9225 9225.20101221..... SPEC 9225 9225.20121221..... SPEC 9225 9225.20121222..... SPEC 9225 9225.20161221..... SPEC 9225 9225.20161222..... SPEC 9225 9225.20201221..... SPEC 9225 9225.20241221..... SPEC 9225 9225.20241222..... SPEC 9225 9225.20361221..... SPEC 9225 9225.20361222..... SPEC 9225 9225.20501221..... SPEC 9225 9250.16021221..... SPEC 9250 9250.16041221..... SPEC 9250 9250.16041222..... SPEC 9250 9250.16061221..... SPEC 9250 9250.16081221..... SPEC 9250 9250.16081222..... SPEC 9250 9250.16101221..... SPEC 9250 Phone: 888-593-3355 www.generalcable.com Index January, 2013 Part Number Index PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER 9250.16121221..... SPEC 9250 9250.16121222..... SPEC 9250 9250.16161221..... SPEC 9250 9250.16161222..... SPEC 9250 9250.16201221..... SPEC 9250 9250.16241221..... SPEC 9250 9250.16241222..... SPEC 9250 9250.16361221..... SPEC 9250 9250.16361222..... SPEC 9250 9250.16501221..... SPEC 9250 9250.18021221..... SPEC 9250 9250.18041221..... SPEC 9250 9250.18041222..... SPEC 9250 9250.18061221..... SPEC 9250 9250.18081221..... SPEC 9250 9250.18081222..... SPEC 9250 9250.18101221..... SPEC 9250 9250.18121221..... SPEC 9250 9250.18121222..... SPEC 9250 9250.18161221..... SPEC 9250 9250.18161222..... SPEC 9250 9250.18201221..... SPEC 9250 9250.18241221..... SPEC 9250 9250.18241222..... SPEC 9250 9250.18361221..... SPEC 9250 9250.18361222..... SPEC 9250 9250.18501221..... SPEC 9250 9250.20021221..... SPEC 9250 9250.20041221..... SPEC 9250 9250.20041222..... SPEC 9250 9250.20061221..... SPEC 9250 9250.20081221..... SPEC 9250 9250.20081222..... SPEC 9250 9250.20101221..... SPEC 9250 9250.20121221..... SPEC 9250 9250.20121222..... SPEC 9250 9250.20161221..... SPEC 9250 9250.20161222..... SPEC 9250 9250.20201221..... SPEC 9250 9250.20241221..... SPEC 9250 9250.20241222..... SPEC 9250 9250.20361221..... SPEC 9250 9250.20361222..... SPEC 9250 9250.20501221..... SPEC 9250 9325.16010001..... SPEC 9325 9325.16010002..... SPEC 9325 9325.16020001..... SPEC 9325 9325.16040001..... SPEC 9325 9325.16040002..... SPEC 9325 9325.16060001..... SPEC 9325 9325.16080001..... SPEC 9325 9325.16080002..... SPEC 9325 9325.16100001..... SPEC 9325 9325.16120001..... SPEC 9325 9325.16120002..... SPEC 9325 9325.16160001..... SPEC 9325 9325.16160002..... SPEC 9325 9325.16200001..... SPEC 9325 9325.16240001..... SPEC 9325 9325.16240002..... SPEC 9325 9325.16360001..... SPEC 9325 9325.16360002..... SPEC 9325 9325.16500001..... SPEC 9325 9325.18020001..... SPEC 9325 9325.18040001..... SPEC 9325 9325.18080001..... SPEC 9325 9325.18120001..... SPEC 9325 9325.18160001..... SPEC 9325 9325.18240001..... SPEC 9325 9350.16020001..... SPEC 9350 9350.16040001..... SPEC 9350 9350.16040002..... SPEC 9350 9350.16060001..... SPEC 9350 9350.16080001..... SPEC 9350 9350.16080002..... SPEC 9350 9350.16100001..... SPEC 9350 9350.16120001..... SPEC 9350 9350.16120002..... SPEC 9350 9350.16160001..... SPEC 9350 9350.16160002..... SPEC 9350 9350.16200001..... SPEC 9350 9350.16240001..... SPEC 9350 9350.16240002..... SPEC 9350 9350.16360001..... SPEC 9350 9350.16360002..... SPEC 9350 9350.16500001..... SPEC 9350 9350.18020001..... SPEC 9350 9350.18040001..... SPEC 9350 9350.18080001..... SPEC 9350 9350.18120001..... SPEC 9350 9350.18160001..... SPEC 9350 9350.18240001..... SPEC 9350 9500.01002110..... SPEC 9500 9500.01003110..... SPEC 9500 9500.01004110..... SPEC 9500 9500.01006110..... SPEC 9500 9500.01008110..... SPEC 9500 9500.01011110..... SPEC 9500 9500.01202112..... SPEC 9500 9500.01203112..... SPEC 9500 9500.01204112..... SPEC 9500 9500.01205112..... SPEC 9500 9500.01206112..... SPEC 9500 9500.01208112..... SPEC 9500 9500.01211112..... SPEC 9500 9500.01218112..... SPEC 9500 9500.01236112..... SPEC 9500 9500.01402114..... SPEC 9500 9500.01403114..... SPEC 9500 9500.01404114..... SPEC 9500 9500.01405114..... SPEC 9500 9500.01406114..... SPEC 9500 9500.01408114..... SPEC 9500 9500.01411114..... SPEC 9500 9500.01418114..... SPEC 9500 9500.01436114..... SPEC 9500 9510.01004110..... SPEC 9510 9510.01204112..... SPEC 9510 9510.01205112..... SPEC 9510 9510.01207112..... SPEC 9510 9510.01209112..... SPEC 9510 9510.01404114..... SPEC 9510 9510.01405114..... SPEC 9510 9510.01407114..... SPEC 9510 9510.01409114..... SPEC 9510 9510.01412114..... SPEC 9510 9510.01419114..... SPEC 9510 9510.01437114..... SPEC 9510 9510.012121112... SPEC 9510 9525.01002000..... SPEC 9525 9525.01003000..... SPEC 9525 9525.01004000..... SPEC 9525 9525.01005000..... SPEC 9525 9525.01007000..... SPEC 9525 9525.01009000..... SPEC 9525 9525.01012000..... SPEC 9525 9525.01202000..... SPEC 9525 9525.01203000..... SPEC 9525 9525.01204000..... SPEC 9525 9525.01205000..... SPEC 9525 9525.01207000..... SPEC 9525 9525.01209000..... SPEC 9525 9525.01212000..... SPEC 9525 9525.01219000..... SPEC 9525 9525.01237000..... SPEC 9525 9525.01402000..... SPEC 9525 9525.01403000..... SPEC 9525 9525.01404000..... SPEC 9525 9525.01405000..... SPEC 9525 9525.01407000..... SPEC 9525 9525.01409000..... SPEC 9525 9525.01412000..... SPEC 9525 9525.01419000..... SPEC 9525 9525.01437000..... SPEC 9525 9600.00103310..... SPEC 9600 9600.00104106..... SPEC 9600 9600.00203310..... SPEC 9600 9600.00204106..... SPEC 9600 9600.00403312..... SPEC 9600 9600.00404108..... SPEC 9600 9600.00603312..... SPEC 9600 9600.00604108..... SPEC 9600 9600.00803314..... SPEC 9600 9600.00804110..... SPEC 9600 9600.01003314..... SPEC 9600 9600.01004314..... SPEC 9600 9600.01203316..... SPEC 9600 9600.01204316..... SPEC 9600 9600.01403318..... SPEC 9600 9600.01404318..... SPEC 9600 9600.11003310..... SPEC 9600 9600.11004106..... SPEC 9600 Phone: 888-593-3355 www.generalcable.com Index January, 2013 Part Number Index PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER PART SPEC NUMBER NUMBER 9600.21003310..... SPEC 9600 9600.21004106..... SPEC 9600 9600.25003308..... SPEC 9600 9600.25004104..... SPEC 9600 9600.31003308..... SPEC 9600 9600.31004104..... SPEC 9600 9600.35003307..... SPEC 9600 9600.35004103..... SPEC 9600 9600.41003308..... SPEC 9600 9600.41004104..... SPEC 9600 9600.50003306..... SPEC 9600 9600.50004102..... SPEC 9600 9600.75003305..... SPEC 9600 9600.75004101..... SPEC 9600 9600.100031110... SPEC 9600 9600.100041110... SPEC 9600 9615.00103310..... SPEC 9615 9615.00203310..... SPEC 9615 9615.00403312..... SPEC 9615 9615.00603312..... SPEC 9615 9615.00803314..... SPEC 9615 9615.01003314..... SPEC 9615 9615.01203316..... SPEC 9615 9615.01403318..... SPEC 9615 9615.11003310..... SPEC 9615 9615.21003306..... SPEC 9615 9615.25003304..... SPEC 9615 9615.35003302..... SPEC 9615 9615.41003304..... SPEC 9615 9615.50003301..... SPEC 9615 9625.043124108... SPEC 9625 9625.063124108... SPEC 9625 9625.083124110... SPEC 9625 9625.103124110... SPEC 9625 9650.023123000... SPEC 9650 9650.023124000... SPEC 9650 9650.023143000... SPEC 9650 9650.023144000... SPEC 9650 9650.024123000... SPEC 9650 9650.024124000... SPEC 9650 9650.024143000... SPEC 9650 9650.024144000... SPEC 9650 9650.043123000... SPEC 9650 9650.043124000... SPEC 9650 9650.043143000... SPEC 9650 9650.043144000... SPEC 9650 9650.044123000... SPEC 9650 9650.044124000... SPEC 9650 9650.044143000... SPEC 9650 9650.044144000... SPEC 9650 9650.063123000... SPEC 9650 9650.063124000... SPEC 9650 9650.063143000... SPEC 9650 9650.063144000... SPEC 9650 9650.064123000... SPEC 9650 9650.064124000... SPEC 9650 9650.064143000... SPEC 9650 9650.064144000... SPEC 9650 9650.083123000... SPEC 9650 9650.083124000... SPEC 9650 9650.083143000... SPEC 9650 9650.083144000... SPEC 9650 9650.084123000... SPEC 9650 9650.084124000... SPEC 9650 9650.084143000... SPEC 9650 9650.084144000... SPEC 9650 9650.103123000... SPEC 9650 9650.103143000... SPEC 9650 9650.103144000... SPEC 9650 9650.104123000... SPEC 9650 9650.104124000... SPEC 9650 9650.104143000... SPEC 9650 9650.104144000... SPEC 9650 9650.123143000... SPEC 9650 9650.123144000... SPEC 9650 9650.124143000... SPEC 9650 9650.124144000... SPEC 9650 9675.00103310..... SPEC 9675 9675.00203310..... SPEC 9675 9675.00403312..... SPEC 9675 9675.00603312..... SPEC 9675 9675.00803314..... SPEC 9675 9675.01003316..... SPEC 9675 9675.01203318..... SPEC 9675 9675.11003310..... SPEC 9675 9675.21003310..... SPEC 9675 9675.25003308..... SPEC 9675 9675.35001308..... SPEC 9675 9675.41003308..... SPEC 9675 9675.50003306..... SPEC 9675 9700.00103308..... SPEC 9700 9700.00203310..... SPEC 9700 9700.00403310..... SPEC 9700 9700.00603310..... SPEC 9700 9700.00803312..... SPEC 9700 9700.10003304..... SPEC 9700 9700.11003308..... SPEC 9700 9700.21003308..... SPEC 9700 9700.25003307..... SPEC 9700 9700.35003306..... SPEC 9700 9700.41003307..... SPEC 9700 9700.50003305..... SPEC 9700 9700.75003304..... SPEC 9700 9800.00103308..... SPEC 9800 9800.00203310..... SPEC 9800 9800.00403310..... SPEC 9800 9800.00603310..... SPEC 9800 9800.10003304..... SPEC 9800 9800.11003308..... SPEC 9800 9800.21003308..... SPEC 9800 9800.25003307..... SPEC 9800 9800.35003306..... SPEC 9800 9800.41003307..... SPEC 9800 9800.50003305..... SPEC 9800 9800.75003304..... SPEC 9800 9815.00103308..... SPEC 9815 9815.00203310..... SPEC 9815 9815.00403310..... SPEC 9815 9815.00603310..... SPEC 9815 9815.10003304..... SPEC 9815 9815.11003308..... SPEC 9815 9815.21003308..... SPEC 9815 9815.25003307..... SPEC 9815 9815.35003306..... SPEC 9815 9815.41003307..... SPEC 9815 9815.50003305..... SPEC 9815 9815.75003304..... SPEC 9815 9825.00103104..... SPEC 9825 9825.00203106..... SPEC 9825 9825.11003104..... SPEC 9825 9825.21003104..... SPEC 9825 9825.25003103..... SPEC 9825 9825.35003102..... SPEC 9825 9825.41003103..... SPEC 9825 9825.50003101..... SPEC 9825 9825.750031110... SPEC 9825 9835.00103104..... SPEC 9835 9835.00203106..... SPEC 9835 9835.11003104..... SPEC 9835 9835.21003104..... SPEC 9835 9835.25003103..... SPEC 9835 9835.35003102..... SPEC 9835 9835.41003103..... SPEC 9835 9835.50003101..... SPEC 9835 9835.750031110... SPEC 9835 9845.00103104..... SPEC 9845 9845.11003104..... SPEC 9845 9845.21003104..... SPEC 9845 9845.25003103..... SPEC 9845 9845.35003102..... SPEC 9845 9845.41003103..... SPEC 9845 9845.50003101..... SPEC 9845 9855.00103104..... SPEC 9855 9855.11003104..... SPEC 9855 9855.21003104..... SPEC 9855 9855.25003103..... SPEC 9855 9855.35003102..... SPEC 9855 9855.41003103..... SPEC 9855 9855.50003101..... SPEC 9855 9875.11003104..... SPEC 9875 9875.21003104..... SPEC 9875 9875.25003103..... SPEC 9875 9875.35003102..... SPEC 9875 9875.41003103..... SPEC 9875 9875.50003101..... SPEC 9875 9900.15744........... SPEC 9900 9900.27901........... SPEC 9900 9900.KS226........... SPEC 9900 9900.PS526........... SPEC 9900 Phone: 888-593-3355 www.generalcable.com General Cable 4 Tesseneer Drive Highland Heights, Kentucky 41076-9753 U.S.A. www.generalcable.com Telephone (888) 593-3355 Fax (800) 335-1270 International Telephone +1 859 572 8000 International Fax +1 859 572 8058 Form No. INS-0105-R0113 43298 Use your smartphone to view Interactive Catalog online
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2012:12:28 08:12:19-05:00 Creator : Adobe InDesign CS5 (7.0.4) Modify Date : 2013:12:13 17:03:16-05:00 Trapped : False Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2013:12:13 17:03:16-05:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Format : application/pdf Document ID : uuid:a55e6070-bc9d-734a-a184-48e699f18eae Instance ID : uuid:778b6f03-d14c-cb41-8fcf-aea8e527c3ab Producer : Adobe PDF Library 9.9 Page Layout : OneColumn Page Mode : UseOutlines Page Count : 111EXIF Metadata provided by EXIF.tools