Cover 68684 Catalog
2014-10-22
: Pdf 68684-Catalog 68684-Catalog Batch9 unilog
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
DIMMING FACTS FOR LED PRODUCTS DIMMING FACTS FOR LED PRODUCTS Introduction Liton offers five dimmable driver options for its product lines: incandescent, electronic low voltage, magnetic low voltage, Hi-Lume and 0-10V. The following pages will help to explain the uses, benefits and limitations of each dimming system. Not all dimming options are available for all products. Please consult our website at: www.liton.com for available options. LED Dimming Driver Terminology: Efficacy: The efficacy or efficiency of a lighting fixture is the amount of light (lumens) per unit of energy (watts). Lm/watts = efficacy ELV – type dimmer: An electronic low voltage dimmer used with electronic low voltage LED drivers. Also known as a trailing-edge dimmer. MLV – type dimmer: A magnetic low voltage dimmer used with magnetic low voltage drivers Ghosting: When an LED lighting fixture continues to glow in the off position. This is usually due to mismatched driver and dimmer technology, ex: incandescent dimmer paired with an electronic low voltage driver. Leading-edge Dimmer: A dimmer that was designed to work with Incandescent lamps. Older dimmers of this type were not designed to work with LED lamps and problems with flicker, pop-on and ghosting due to residual voltage have been observed. Newer designs have been specially designed to eliminate these problems. LED Driver: An electrical device that converts line voltage power to a power level that low voltage LEDs can use, much like a low voltage transformer converts line voltage power (120VAC) to low voltage (12VDC) so that it can be used with 12V MR16 lamps. LED Dimmable Driver: An LED driver that provides the correct power to the LEDs so that it can function and also allows the lumen output to be dimmed to create mood, ambience or to save energy. Light Emitting Diode (LED): A low voltage semiconductor device that emits light when electrical current is passed through it. Pulse Width Modulation (PWM): A method most LED drivers use to regulate the amount of power to the LED. PWM turns LEDs on and off at high frequency, reducing the total ON time to achieve a desired dimming level without visible flicker. Reverse Phase Dimmers: Also known as ‘Trailing-edge’ were designed to work with most electronic (ELV) and 3-wire CFL dimmers Trailing-edge Dimmer: A type of dimmer that was designed for use with most electronic low voltage (ELV) and 3-wire CFL dimmers. Standard Phase Dimmers: Also known as ‘Leading-edge’ were designed for use with Incandescent products. Qualified Partners: 1 A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) DIMMING FACTS FOR LED PRODUCTS Incandescent Dimming Driver Option History Incandescent Dimmers were designed for use with Incandescent (120V) lighting fixtures that use A19 bulbs and PAR type lamps. They are the least expensive and most widely installed dimmers in the marketplace. They are also known as Leading Edge Dimmers or Triac Dimmers. Where Used? LITON offers 2-wire incandescent compatible drivers in many of its 4", 5" and 6" General Purpose Recessed Housings and its 2", 3" and 4" Mini-Arc Recessed Housings and are specified as “-DIN” when ordering. Please see specification sheets for further details. Synonymous Terms: Incandescent, Leading Edge, 2-Wire and Triac Dimmers, Forward Phase. Benefits • Incandescent LED drivers work with most 2-wire incandescent dimmers making them perfect for many retrofit applications. • Liton’s incandescent drivers are specially designed to eliminate the problems associated with using incandescent dimmers with LED fixtures including flicker and ghost imaging in power off mode. • Incandescent dimmers are the least expensive and have the most installations in the marketplace. Limitations • Incandescent dimmers should not be used with ELV or MLV drivers because doing so could cause any of the following malfunctions: dimmer buzz, lamp flicker, interaction between circuits or radio frequency interference (RFI). Partial list of factory tested, compatible incandescent dimmers: Incandescent Dimmer Wiring Diagram Hot Black Red INCANDESCENT DIMMER 120V 60Hz Manufacturer Style Model Lutron Skylark S600PR Lutron Diva DVSCCL-153P Lutron Diva DV600PR Leviton Illumatech IP106 (600W) Hunt Simplicity PS-LED-PC Neutral A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) 2 DIMMING FACTS FOR LED PRODUCTS Electronic Low Voltage (ELV) Dimming History Electronic Low Voltage (ELV) Dimmers were originally designed to control Electronic Low Voltage Transformers used in low voltage (12V) MR16 type fixtures. ELV dimmers and transformers are more expensive but offer quieter operation, better control and tend to last longer than Magnetic Low Voltage Transformers (MLV). Also referred to as Reverse Phase Dimmers. Where Used ELV Dimming Option is used in LITON General Purpose Recessed Housings and is specified as “DLV” when ordering. Please see specification sheets for further details. Synonymous Terms: Electronic Low Voltage, ELV, Trailing Edge and Reverse Phase Benefits • ELV dimming drivers from Liton are the LED driver most widely tested and approved by dimmer manufacturers (see list). • Works better on LEDs than most magnetic low voltage (MLV) drivers. • Allows smooth dimming down to 5% depending upon the dimmer’s limitations. Limitations • ELV wall dimmers can be more expensive than incandescent or magnetic low voltage dimmers. • Smaller install base could mean replacing incompatible dimmers on retrofit projects. • ELV drivers should not be used with incandescent dimmers because doing so could cause any of the following malfunctions: dimmer buzz, lamp flicker, interaction between circuits or radio frequency interference (RFI). • All ELV drivers and dimmers are 3-wire, requiring a neutral wire. This can result in having to pull additional wire on remodel projects. Electronic Low Voltage (ELV) Dimmer Wiring Diagram Hot Black Yellow ELECTRONIC LOW VOLTAGE DIMMER 120V 60Hz Examples of ELV dimmers: (See next page for a more comprehensive list): Manufacturer Style Model Lutron Skylark SELV-300P Lutron Diva DVELV-300P Lutron Maestro MAELV-600 Lutron Nova NTELV-600 Lutron Vierti VTELV-600 Leviton Surslide 6615-POW LiteTouch Inverse Phase 08-2140-01 LiteTouch 8-Channel 6615-POW Neutral 3 A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) DIMMING FACTS FOR LED PRODUCTS (ELV) Factory Qualified Dimmers for Under Cabinet “LULED” Series, Track Lighting “LTD8” Series and Recessed Lighting “LHLD” 4", 5" & 6" Series Series Q UA L I F I E D PAR T N E R Model Power Avg. Price # Units per Dimmer LXELV-600PL LXELV-603PL 600W 600W SELV-300P 1 - 13 FAELV-500M 600W SELV-300P 1 - 11 SELV-300P SELV-303P 300W 300W $45 - $55 $45 - $55 1-7 1-7 DVELV-300P DVELV-303P 300W 300W $80 - $100 $80 - $100 1-7 1-7 MAELV-600 600W $110 - $150 1-3 NELV-450 NTELV-600 450W 600W $80 - $85 $150 - $200 1 - 10 1 - 14 VTELV-600 600W $180 - $200 1 - 14 $130 - $180 2 1 unit min. 1 unit min. 4 units min. 1 - 27 (Qualified LED Partner) Lyneo® LX Single Pole 3-Way Faedra® Single Pole Skylark Single Pole 3-Way Diva Single Pole 3-Way Maestro Single Pole Nova Single Pole Single Pole Vierti™ Single Pole/Multi Location Lutron Interfaces Grafik Eye® Grafik Eye® HomeWorks® RadioRA 2 Commercial Systems **Low end trim adjustment needed ELVI-1000 PHPM-PA Power Module HW-RPM-4A** RRD-6XA** LP-RPM-4A** (Certified Partner) iLux® Universal Dimmer Low Voltage Dimmer Universal Dimmer CLS-EXP-DIMU CLX-1DELV4 DIN-1DIMU4 600W 600W SELV-300P 1 - 13 Electronic Dimmer 120V Electronic Load Dimmer 120V EDIMMOD ELDS4-DIN 600W 600W SELV-300P 1 unit min. 1 unit min. Single Pole 3-Way 6615-POW 6615-POW $20 - $30 $20 - $30 1 - 14 1 - 14 Single Pole 3-Way VZE06-1LZ VZE06-1LZ $90 - $150 $120 - $180 1 - 14 1 - 14 Single Pole 3-Way Illumatech Single Pole 3-Way ATEO-1LW ATEO-1LW $75 - $100 $75 - $100 1-9 1-9 $40 - $70 $40 - $70 1-7 1-7 $35 - $45 1 - 13 V A N T A G E Surslide Vizia Acenti IPE04 IPE04 600W 600W 600W 600W 400W 400W 300W 300W Miro Single Pole DCD267* 600W Unison Dimmer Module Unison Dimmer Module ELV10 D20 0W 154W 120V Inverse Phase 08-2140-01 480W A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) 4 DIMMING FACTS FOR LED PRODUCTS Magnetic Low Voltage (MLV) Dimming History Magnetic Low Voltage (MLV) Dimmers were designed to control Magnetic Low Voltage Transformers used in low voltage lighting fixtures. Where Used? MLV Dimming can be used in LITON Linkaled products and come standard on all LD522 drivers. Synonymous Terms: Magnetic Low Voltage, MLV Benefits • Liton’s magnetic low voltage (MLV) drivers are specially designed to function with most magnetic low voltage dimmers. • Allows smooth dimming down to 10% depending upon the dimmer’s limitations. • All MLV drivers and dimmers are 2-wire and do not require an additional neutral wire. • MLV dimmers are less expensive than electronic low voltage dimmers or 0-10V dimmers. Limitations • MLV wall dimmers can be more expensive than incandescent dimmers • MLV drivers should not be used with incandescent dimmers because doing so could cause any of the following malfunctions: dimmer buzz, lamp flicker, interaction between circuits or radio frequency interference (RFI). Magnetic Low Voltage (MLV) Dimmer Wiring Diagram Examples of MLV dimmers: (See next page for a more comprehensive list): Hot Black Black MAGNETIC LOW VOLTAGE DIMMER 120V 60Hz LD522 Driver Manufacturer Style Model Lutron Nova NTLV-1000 Lutron Diva DVLV-103P Lutron Skylark SLV-603P Lutron Illumatech IPM06-1LZ Linkaled Tape, Bar or Puck Neutral 5 A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) DIMMING FACTS FOR LED PRODUCTS Factory Tested (MLV) Dimmers for Linkaled Products Series Model (Qualified LED Partner) Ariadni® Single Pole 3-Way AYLV-600P AYLV-603P AYLV-600P-S AYLV-600P-S AYLV-600P-CSA AYLV-603P-CSA Single Pole/Multi Location V-600 V-1000-S VETN-1000-S VETS-R VETS-1000-SL V-600-S VETN-1000 VETS-1000-S VETS-A-SL VETS-1000-SL-S V-1000 VETS-1000 VETS-1000-CSA VETS-R-S VETS-A-SL-S Single Pole Single Pole / 3-Way 3-Way 4-Way NTLV-600 NTLV-1000 NTLV-1500 NTLV-603P NTLV-1003P NTLV-1503P NTLV-2003P NTLV-603P-CSA NTLV-1503P-CSA NTLV-600-S NTLV-1000--S NTLV-1500-S NTLV-603P-S NTLV-1003P-S NTLV-1503P-S NTLV-2003P-S NTLV-1003P-CSA NT1PS NT-1PS-S NT-1PS-CSA NT-3PS NT-3PS-S NT-3PS-CSA NT-4PSNT-4PS-S NT-4PS-CSA Single Pole 3-Way CNLV-600P CNLV-603P 3-Way Single Pole 3-Way 4-Way DVLV-603P DVLV-603P-S DVLV-103P DVLV-103P-S DVLV-10P DVLV-10P-S DVLV-600P SC-1PS SC-3PSNL DVSCLV-603P DVLV-603PH-S DVSCLV-103P DVLV-103PH-S DVSCLV-10P DVLV10PH-S DVSCLV-600P SC-1PSNL SC-4PS DVLV-603P-CSA DVSCLV-603P-L DVLV-103P-CSA DVSCLV-103P-L DVLV-10P-CSA DVSCLV-10P-L Single Pole GLV-600 GLV-600-CSA Single Pole 3-Way LXLV-600PL LXLV-603PL LXLV-10PL LXLV-103PL Single Pole NTLV-600 NTLV-1000 NTLV-600-277 NTLV-1000-277 NTLV-1500 Single Pole 3-Way SLV-600P SLV-603P SLV-600P-CSA SLV-603P-CSA SLV-600PH-CSA SLV-603PH-CSA IllumaTech® Single Pole / 3-Way Single Pole / 3-Way IPM06-1LZ IPM10-1LZ IPM06-1LX MDM06-1LI MDM10-1LI MDM06-1LW MDM10-1LW MDM06-1LA MDM10-1LA 6613-PLT 6613-PLI 6613-PLW 6613-PLA Single Pole / 3-Way Single Pole / 3-Way TGM10-1LI TGM10-1LT TGM10-1LA Single Pole / 3-Way VPM06-1LZ Vareo® Nova® Ceana® Diva® SC-3PS SC-4PSNL Glyder® Lyneo® Nova T® Skylark® Mural™ Single Pole / 3-Way Single Pole / 3-Way SureSlide® Single Pole / 3-Way ToggleTouch™ Vizia® A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) 6 DIMMING FACTS FOR LED PRODUCTS 0-10V Dimming Driver Option History 0-10V Dimmers have been used in commercial applications for fluorescent lighting and occupancy and daylight sensor systems for years and are now becoming popular with LED products. One reason this standard is widely established is that it is defined in the IEC standard number 60929 Annex E, making it acceptable to most engineers. Where Used? LITON offers 0-10V drivers in its 5" and 6" General Purpose Recessed Housings, Architectural Recessed Housings, 24V Linkaled products and are specified as “-D10” when ordering. Please see specification sheets for further details. Synonymous Terms: 0-10V, Fluorescent Dimming, 5-Wire Dimming. Benefits • • • • • Use existing 0-10V systems in retrofit applications. Liton’s -D10 LED Driver is compatible with most 0-10V control systems. Large 0-10V install base in commercial applications due to IEC standards. Allows smooth dimming down to 5% depending upon the dimmer’s limitations. Compatible with many daylight harvesting controls. Limitations • Some manufacturers do not follow the IES standard. This leads to LED drivers and lamps that claim 0-10V compatibility but drop out or pop on, or dim backwards with the lowest output at the top and the highest output at the bottom. • The control signal is a small analog voltage and long wire runs can cause a signal level drop that can produce different light levels from different drivers on the same control circuit. 0-10V Dimmer Wiring Diagram -D10: 0-10V Fluorescent Dimming Line (Black) LEVITON: IP710-DL or other Negative (Gray)1 Line (Black) Data - Negative (Gray)1 1Usually dimming control color, may be other color (Violet)1 Positive Data + Red Input Line Line (Red) Insulating Label Positive (Violet)1 Line (Black)1 + Electronic LED Driver To LED Ground (Green) Neutral (White) Neutral (White) Example 1: Manufacturer Style Leviton IP710-DLX Lutron NTFTV-WH* Lightolier V2000FAMU Synergy Mark VII ISD 120/277 WH-M10 *requires separate power pack, not supplied 7 A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) DIMMING FACTS FOR LED PRODUCTS More Examples of 0-10V Dimming Systems: Manufacturer Style Manufacturer Style Douglas Lighting ALC3-BCM Hunt Dimming PS-010-120V & PS-010-3W-120V Douglas Lighting WPN-5821/5822/5721 Hunt Dimming PS-010-277V & PS-0101-3W-277V Douglas Lighting WWS-1301/1302 Hunt Dimming PS-LED-010-120V, PS-LED-010-3W-120V Hunt Dimming PS-LED-010-277V, PS-LED-010-3W-277V Manufacturer Style Manufacturer Style Leviton a-2000 Lehigh Electrical Co., Inc. Collage Impress Touch Master Leviton IP710 Lehigh Electrical Co., Inc. CT500 LCD Touch Leviton Renior II (w/ 0-10V Setting) Lehigh Electrical Co., Inc. DX2, DX2 277 Lehigh Electrical Co., Inc. Single Set Manufacturer Style Manufacturer Style Lutron DVTV, DVSCTV Wattstopper, Inc. ADF-120277 Lutron NFTV Lutron NTFTV A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) 8 DIMMING FACTS FOR LED PRODUCTS Lutron Hi-Lume Dimming Option History Lutron originally developed its Hi-Lume 1% Dimming ballast for use with fluorescent and compact fluorescent dimmer controls. It is a 3-wire system that has a separate line voltage wire that carries the phase control signal separate from the power wires. Hi-Lume drivers dim down to 1% of initial lumens, are more precise and more immune to electrical noise. Where Used? LITON offers Hi-Lume drivers in many of its General Purpose, Mini-Arc and Architectural LED products and are specified as “-DHL” when ordering. Synonymous Terms: Hi-Lume, 3-Wire Benefits • Allows smooth, continuous dimming down to 1% of initial lumens depending on dimming control limitations. • Lutron’s Hi-Lume LED driver is compatible with more Lutron dimmers than any other brand and also compatible with their EcoSystem control system. • Backed by Lutron’s 5-year Limited Warranty. Limitations • Compatible Lutron wall dimmers can be more expensive than electronic low voltage, incandescent or magnetic low voltage dimmers. • All Lutron Hi-Lume drivers and compatible dimmers are 3-wire, requiring a neutral wire. This could necessitate pulling additional wire. • The “-DHL” option should not be used with incandescent dimmers because doing so could cause any of the following malfunctions: dimmer buzz, lamp flicker, interaction between circuits or radio frequency interference (RFI). -DHL Wiring Diagram -DHL: Lutron 3-Wire Fluorescent Dimming (120V) LUTRON 3-Wire Dimmer Line (Black) 1Usually Line (Black) Dimming Line (Yellow) Input Line 120V/277V AC Line (Red) Neutral (White) Dimming Line (Orange)1 Line (Black)1 Ground “Green” Neutral (White) dimming control color, may be other color 3-Wire Electronic 120V/277V AC Dimming Ballast/ LED Driver + To LED Neutral (White) Partial list of factory tested, compatible dimmers: (See next page for the Lutron Compatibility Report Card) 9 Manufacturer Style Model Lutron NovaT NTF-10-277 Lutron Skylark SF-12P-277 Lutron Vierti VTF6A A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) DIMMING FACTS FOR LED PRODUCTS Qualified Hi-Lume® Dimmers For fixtures using the Lutron Hi-Lume® A-Series LED Driver Fixtures per Control* Part Number Product Family Measured light output range 120V 277V NTF-10 NTF-10-277 1 - 41 1 - 44 100% - 1% NTF-103P NTF-103P-277 1 - 20 1 - 33 100% - 1% NF-10 NF-10-277 1 - 41 1 - 44 100% - 1% NF103P NF130P-277 1 - 20 1 - 33 100% - 1% 120V 277V NovaT® Nova® Vareo VF10 ® 1 - 20 - 100% - 1% SF-10P SF-12P-277 1 - 20 1 - 33 100% - 1% SF-103P SF-12P-277-3 1 - 20 1 - 33 100% - 1% DVF-103P DVF-103P-277 1 - 20 1 - 33 100% - 1% Skylark® Diva® DVSCF-103P DVSCF-103P-277 1 - 20 1 - 33 100% - 1% Ariadni® AYF-103P AYF-103P-277 1 - 20 1 - 44 100% - 1% Vierti VTF-6A ® Maestro® 1 - 15 1 - 33 100% - 1% MAF-6AM MAF-6AM-277 1 - 15 1 - 33 100% - 1% MSCF-6AM MSCF-6AM-277 1 - 15 1 - 33 100% - 1% 1 - 15 1 - 33 100% - 1% Maestro Wireless® MRF2-F6AN-DV RadioTouch RTA-RX-F ® Spacer System® 1 - 41 1 - 88 100% - 1% SPSF-6A SPSF-6A-277 1 - 15 1 - 33 100% - 1% SPSF-6AM SPSF-6AM-277 1 - 15 1 - 33 100% - 1% Lyneo® Lx LXF-103PL LXF-103PL-277 1 - 20 1 - 33 100% - 1% RadioRA 2 RRD-F6AN-DV 1 - 15 1 - 33 100% - 1% HomeWorks® QS HQRD-F6AN-DV 1 - 15 1 - 33 100% - 1% 1 - 41 1 - 88 100% - 1% 1 - 41 1 - 88 100% - 1% ® Interfaces** PHPM-3F PHPM-3F-DV GRX-FDBI-16A PowPak™ dimming module with EcoSystem RMJ-ECO32-DV-B 32 per EcoSystem link 100% - 1% PowPak™ dimming module with EcoSystem QSN-1ECO-S, QSN-2ECO-S 63 per EcoSystem link 100% - 1% PowPak™ dimming module with EcoSystem QSG-_P120 64 per EcoSystem link 100% - 1% Quantum® Various 64 per EcoSystem link 100% - 1% * Fixtures per control assumes a 40W fixture. Number of fixtures may be higher if wattages is less than 40W and may be lower if ganged. See control specification submittal sheet for details. ** For use with 3-wire controls or Commercial Systems, RadioRA Systems, or Home Systems applications. A DIVISION OF EEMA LIGHTING GROUP • 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA • PH: 323.904.0200 (1 800 515 4880) FAX: 323.904.0201 (1 800 972 4880) 10 DIMMING FACTS FOR LED PRODUCTS © 2012 LITON LIGHTING • A DIVISION OF EEMA LIGHTING GROUP
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : esoetikno Create Date : 2013:01:31 10:51:53-08:00 Modify Date : 2013:01:31 11:07:24-08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : cover.ai Creator : esoetikno Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2013:01:31 11:07:24-08:00 Producer : Acrobat Distiller 10.1.4 (Windows) Document ID : uuid:5c4e54c6-9c9b-42fc-8aa0-31bf1bc6d917 Instance ID : uuid:f2974a5c-204c-47c2-9b4e-449c72142407 Page Count : 12EXIF Metadata provided by EXIF.tools