Product Detail Manual
699280-Catalog 699280-Catalog 699280-Catalog 002921 Batch7 unilog cesco-content
2014-10-17
: Pdf 699354-Attachment 699354-Attachment 002921 Batch10 unilog
Open the PDF directly: View PDF 
.
Page Count: 30
| Download | |
| Open PDF In Browser | View PDF |
HEADER PERFORMANCE CABLETRAY™ HEADER PERFORMANCE CABLETRAY ™ PERFORMANCE CABLETRAY ™ What exactly is performance cabletray? Look no further. WBT was created to offer the best in cable management products to the market today. WBT’s industry leaders reviewed every tray construction, hardware bracket and splice solution, asking, how can we make it better, easier and faster to install? We often make the point that WBT solves installation problems that many didn’t even know they had. We are a company of ‘firsts’. We manufacture the best, most robustly constructed products in today’s market. We ship faster and we service our customers to a level that few companies do today, with unparalleled leadtimes and customer service. Our premise is simple. A higher quality ‘PERFORMANCE’ cabletray, 100% manufactured in the U.S., utilizing 100% domestic recycled steel, with minimized environmental impact finishes. WBT offers better cabling support, opportunities for LEED submittal documentation, and engineering support. Our Shaped Wire (Patented) constructions are documented to decrease pressure/ strain on high performance cabling up to 65%. Today, a majority of the industry trends towards cheap tray constructions with thinner, weaker wires, and leadtimes measured in weeks, not days. Most don’t even make their own products. Instead, it’s farmed out to be contract manufactured by others. This is not the WBT business model. WBT is a company designed and created with a sole purpose, to provide the BEST in mesh cabletray, while supporting you and your customers with the most innovative and creative products in the market, period. Welcome to WBT, where we are shaping the future in cabletray. Browse through our catalog and see the results of almost 45 years of combined mesh experience, new ideas and fresh approaches to your needs. 2 1 | 888.4WB.TRAY 400% increase in cable support SHAPED TRAY CABLING SHAPED CROSSWIRE 0.216” All wire tray manufacturers utilize round wire in the construction of their trays. Today, unfortunately, the trend is towards smaller, cheaper, lighter gauge constructions. The problem is that high performance cabling installed in the tray today has evolved several generations. standard tray support area: .0078125” sq. SHAPED TRAY support area: .03125” sq. (based on cable contact area of .125”) A round crosswire supporting a round cable offers very little surface area support. When you add additional cables, the weight creates a pressure point/strain on the cables within the tray. What WBT has pioneered is a design utilizing shaped crosswires, which increases the support of your critical cabling. WBT’s shaped crosswires eliminate cable stress by increasing the support of the cabling, yet still offers the same functionality of wire tray to cut and configure, and utilizes the same splicing and mounting hardware. WBT does offer the full round wire configuration, if preferred, or for industrial or electrical applications where you’re not facing the same performance issues, or where inserts are being utilized. COMPETITOR TRAY Our Shaped Wire offers: •A Minimum 400% Increase in Cabling Support • Up To 65% Reduction in Cabling Pressure/Strain (see table)* • 100% Domestic Recycled Content • 100% Domestic Manufactured Tray • Cuts, Configures and Splices the Same • No Premium over Competitors ‘Old Round Crosswire’ CABLE PRESSURE REDUCTION CONTACT AREA FLAT LOAD WIRE PRESSURE BENDING STRAIN CONTACT AREA ROUND LOAD WIRE PRESSURE BENDING STRAIN DECREASE IN STRAIN SQUARE INCH LBS. PSI INCHES SQUARE INCH LBS. PSI MICROINCHES FLAT VS. ROUND .03125 .1291 4.1 18 .00781 .1291 16.5 24 .03125 .1876 6.0 27 .00781 .1876 24.0 44 .03125 .2507 8.0 38 .00781 .2507 32.1 61 .03125 .3168 10.1 51 .00781 .3168 40.6 74 .03125 1.1023 35.3 113 .00781 1.1023 141.1 187 33.3% 63.0% 60.5% 45.1% 65.5% * Please contact WBT for our independent study testing round versus WBT’s shaped wire constructions. WBTray.com | 2 THE WBT DIFFERENCE NEW INNOVATIONS FROM WBT WBT is always looking for ways to help customers reduce costs and labor, while keeping our products at the leading edge of the marketplace. Our newest innovations include: WBT PreForm, WBT NoSplice and WBT’s Configurator WBT PreForm patent pending Preformed radius/tee/intersections that save installation time and labor. Available either in flame retardant polymer or steel. No field cutting or configuration, simply install as you would a straight section. WBT NoSplice patent pending We’ve redesigned our most popular support hardware for double duty: tray support and splice point. No more butt splicing each section juncture. UL CLASSIFIED PAINTED TRAY If you prefer a painted tray, no problem. Most manufacturers require you to remove the paint at the splicing points to complete an electrical ground (for UL and cUL classifications). All of WBT’s tray sections are UL Classified when they leave the factory. There is no labor and time in field removal of the paint. Simply splice the trays as you would any galvanized sections, and you’re compliant. WBT offers black, white and pewter as standard colors. Other custom colors are available with minimal leadtimes. T-WELD ON ALL TRAY CONFIGURATIONS WBT provides a T-Weld edgewire on all of its tray configurations. This product design provides protection for both the installer and the cabling from any sharp points within the tray. WBT Configurator A new option for field installs. The labor and cost of field configuration of tray has been eliminated, in addition to insuring a perfect radius section, with no removal of wire, sharp points, or variability of the finished section. WBT Configurator sections are formed at the factory, and ship with your order. A repeatable and engineered section of tray fits every time. On larger installs, WBT will provide the machinery on-site for the installer to configure at the installation location. WBT GREEN POINTS: • Utilizing 100% domestic recycled steel content in the manufacturing of our trays • MillCerts are available to document recycled content for possible LEED credits/certification • No post production chemical cleaning and plating (a huge environmental impact) • WBT utilizes kraft packaging (no bleaching white). Packaging and strapping are recyclable 3 | 888.492.8729 TRAY FINISHES WBT trays are available in a wide variety of finishes to meet the environmental or aesthetic requirements of your installations. Use the chart below to find the finish suffix that will meet your needs. Finish codes: WBT2x4 BL = Tray Depth x Width x Finish Notate finish code when ordering trays and fittings. Suffix Finish Specifications Use no suffix required Pre-Galvanized Finish applied before fabrication ASTM A641 Limited industrial & interior applications recommended ZP Electro Zinc Plating ASTM B633 Controlled interior applications PW Pewter Powder Coated Finish applied after fabrication N/A Controlled interior applications BL Black Powder Coated Finish applied after fabrication N/A Controlled interior applications White Powder Coated Finish applied after fabrication N/A Controlled interior applications Custom Powder Coated Finish applied after fabrication N/A Controlled interior applications ASTM A580 Food preparation, wash-down areas, highly corrosive applications & marine environments CPC 304L & 316L 304L Stainless Steel & 316S Stainless Steel UL/cUL on sizes below when spliced as recommended on sizes below when spliced as recommended on sizes below when spliced as recommended on sizes below when spliced as recommended on sizes below when spliced as recommended on sizes below when spliced as recommended UL CLASSIFIED & cUL CLASSIFIED ON PAINTED TRAY WBT offers painted tray that is UL Classified and cUL Classified as an equipment ground conductor. No field removal of the paint is required. *WBT is the only manufacturer that provides a UL Classified 2x4 tray construction, WBT2x4S 2” depth 4” depth 6” depth 8” depth *WBT2x4S WBT4x6/S WBT6x8/S WBT8x8/S WBT2x6/S WBT4x8/S WBT6x12/S WBT8x12/S WBT2x8/S WBT4x12/S WBT6x16/S WBT8x16/S WBT2x12/S WBT4x16/S WBT6x18/S WBT8x18/S WBT2x16/S WBT4x18/S WBT6x20/S WBT8x20/S WBT2x18/S WBT4x20/S WBT6x22/S WBT2x20/S WBT4x24/S WBT6x24/S WBT2x24/S /S denotes the part number for shaped. WBTray.com | 4 TRAYS 2” DEEP TRAY PART NUMBER PART NUMBER WIDTH WT. per pc. FILL* LOAD lbs/ft SPLICE quantity WBT2X4 WBT2X4S 4" 7 lbs 108 45 2 WBT2X6 WBT2X6S 6" 9 lbs 163 50 4 WBT2X8 WBT2X8S 8" 10.5 lbs 218 52 4 WBT2X12 WBT2X12S 12" 12 lbs 326 58 4 WBT2X16 WBT2X16S 16" 15 lbs 439 70 4 WBT2X18 WBT2X18S 18" 23 lbs 495 70 4 WBT2X20 WBT2X20S 20" 25 lbs 550 73 5 WBT2X22 WBT2X22S 22" 27 lbs 600 73 5 WBT2X24 WBT2X24S 24" 31 lbs 660 75 5 WBT2X26 WBT2X26S 26" 33 lbs 671 73 6 WBT2X28 WBT2X28S 28" 35 lbs 723 73 6 WBT2X30 WBT2X30S 30" 38 lbs 826 70 6 WBT2X32 WBT2X32S 32" 39 lbs 881 70 6 WBT2X34 WBT2X34S 34" 41 lbs 894 WBT2X36 WBT2X36S 36" 42 lbs 947 WBT2X38 WBT2X38S 38" 44 lbs 1000 WBT2X40 WBT2X40S 40" 45 lbs 1052 7 CONSULT WBT 7 FOR FACTORY SPECIFICATIONS 8 8 S denotes the part number for shaped. 4” DEEP TRAY PART NUMBER PART NUMBER WIDTH WT. per pc. FILL* LOAD lbs/ft SPLICE quantity WBT4X4 WBT4X4S 4" 12 lbs 205 49 4 WBT4X6 WBT4X6S 6" 13 lbs 310 49 5 WBT4X8 WBT4X8S 8" 15 lbs 416 78 6 WBT4X12 WBT4X12S 12" 23 lbs 621 78 6 WBT4X16 WBT4X16S 16" 27 lbs 837 108 7 WBT4X18 WBT4X18S 18" 29 lbs 942 116 7 WBT4X20 WBT4X20S 20" 31 lbs 1047 116 7 WBT4X22 WBT4X22S 22" 33 lbs 1152 116 8 WBT4X24 WBT4X24S 24" 35 lbs 1257 116 8 WBT4X28 WBT4X28S 28" 39 lbs 1460 108 9 WBT4X30 WBT4X30S 30" 41 lbs 1578 WBT4X32 WBT4X32S 32" 42 lbs 1684 WBT4X34 WBT4X34S 34" 44 lbs 1789 WBT4X36 WBT4X36S 36" 45 lbs 1894 S denotes the part number for shaped. 5 | 888.4WB.TRAY 10 CONSULT WBT 10 FOR FACTORY SPECIFICATIONS 11 11 6” DEEP TRAY PART NUMBER PART NUMBER WIDTH WT. per pc. FILL* LOAD lbs/ft SPLICE quantity WBT6X8 WBT6X8S 8" 23 lbs 623 116 6 WBT6X12 WBT6X12S 12" 27 lbs 931 123 6 WBT6X16 WBT6X16S 16" 31 lbs 1255 123 7 WBT6X18 WBT6X18S 18" 33 lbs 1413 127 7 WBT6X20 WBT6X20S 20" 35 lbs 1571 127 7 WBT6X22 WBT6X22S 22" 37 lbs 1728 127 8 WBT6X24 WBT6X24S 24" 39 lbs 1886 150 8 S denotes the part number for shaped. TRAY AVAILABLE IN 8, 10 & 12” DEPTH KEY: WBTdepthXwidth crosswire finish DEPTH 2”–12” WIDTH 2”–40” (example: WBT4X18 SBL – 4” deep X 18” wide Shaped Black) CROSSWIRE FINISH S for shaped crosswire Blank for round crosswire Blank for PreGalv ZP for Electro Zinc Plate PW/BL/WH for Standard Powder CPC for Custom Powder 304L/316L Stainless CUSTOM TRAY WBT can fabricate various custom configurations. Please contact the factory for details. Standard finish: | Available in finishes: BL, , PW, CPC, ZP *fill is a theoretical calculation based on a .22” diameter cable WBTray.com | 6 WBT PreForm patent pending NEW Fittings for Tray Radius, Tee and Intersections WBT PreForm is a time and cost effective solution to pathway tees, intersections and radius bends, no cutting…no configuring. You can choose either a steel solution, or a flame retardant polymer (UL 94V-0) that simply attaches at the Intersection, Tee or juncture, when you want a radius bend. The sections are manufactured precisely to the trays being utilized, so it’s a clean engineered solution. Vertical surfaces from tray to tray keep cables properly routed to avoid any excessive bends. Installation of WBT PreForm can take installation configurations from hours to a few minutes. Labor and time savings can exceed 90%+ versus traditional cutting and splicing, all while avoiding sharp protrusions by less trained technicians. WBT PreForm and Fittings allow you to retrofit to any installed tray pathway, and it doesn’t lock you into a single sourced supplier with proprietary sections and solutions. WBT PreForm sections ship in the flat for easy and quick installation, so no excessive transportation costs or likelihood of damage. Most can simply be shipped UPS to the jobsite. KEY: WBT juncture depthXwidth material (example: WBT R 4X18 – Radius 4” deep X 18” Steel) JUNCTURE DEPTH WIDTH MATERIAL R - Radius T - Tee I - Intersection 2”–6” 4”–30” S for Steel P for Polymer TIME SAVINGS CHART CONFIGURATION TRAY RADIUS 2 x8 TRADITIONAL CONFIGURATION WBT PreForm TIME SAVINGS (%) 7 minutes 1 minute 85% RADIUS 4x12 TEE (CORNER SPLICE) 4x12 20 minutes 2 minutes 90% 8 minutes 45 seconds 2 minutes 30 seconds 70% 10 minutes 2 minutes 30 seconds 74% 29 minutes 4 minutes 45 seconds 83% TEE (RADIUS) 4x18 INTERSECTION 6x 24 7 | 888.4WB.TRAY WBT NoSplice patent pending available early 2014 NEW WBT Supports Eliminate Splice Hardware Splice hardware? We don’t need no stinking hardware. Every installer is used to butt splicing tray sections together, whether using nut/bolt or other ornate hardware, every 10 feet. This is in addition to the tray supports and attachment methods. WBT has redesigned its most popular supports so they now pull double duty: tray support AND splice point. With WBT NoSplice, simply lay the tray ends into the support, and a single hold down does everything. No tedious multiple splice hardware at each juncture. Saves time, saves hardware, and saves money. L BRACKET CENTER HANGER CEILING SUPPORT SEE PAGES 11 & 12 FOR ORDERING INFORMATION TIME SAVINGS CHART TRAY WIDTH SPLICE QUANTITY TRADITIONAL SPLICE WBT NO SPLICE TIME SAVINGS (%) MATERIAL COST SAVINGS 2X4 2 40 seconds 10 seconds 75% $1.28 2X12 4 75 seconds 10 seconds 86% $2.55 4X12 6 135 seconds 10 seconds 93% $3.83 4X18 7 160 seconds 20 seconds 87% $4.46 4X24 8 180 seconds 20 seconds 89% $5.10 WBTray.com | 8 WBT Configurator patent pending NEW WBT Field Configured Radius Sections Another WBT first, and another market first. WBT now offers preconfigured radius sections. This benefit provides uniform, repeatable bends and radius with no sharp edges, that are stronger than traditional cut sections, and appear as a more engineered solution than traditional configuration methods. There is no removal of any wires with the tray construction. In addition, field time spent cutting and configuring tray is eliminated. No longer is quality a variable on radius bends and offsets. In 2014, on select projects, installers will have the ability to utilize WBT machinery that will field configure these same bends. We call it the Configurator. Just as at WBT, the installer will be allowed to quickly and easily on-site configure radius sections, in seconds versus minutes. WBT’s Configurator, saves time, saves money, and provides a better engineered solution than traditional cut/configure methods. KEY: WBT-C depth-width-radius finish (example: WBT-C4-12-90 PG – 4” X 12” tray formed into 90 degree Pre-Galvazined finish) PART NUMBER WBT-C__-__-__ 9 | 888.4WB.TRAY DEPTH __ 2”, 4”, 6” WIDTH 4”–24” RADIUS MATERIAL 45° or 90° PG for Pre-Galvanized PW/BL/WH for Standard Powder CPC for Custom Powder ZP for Electro Zinc Plating SPLICING SPLICE KIT PART NUMBER DESCRIPTION WT. per box QUANTITY per box SPLICE KIT 3 piece staked bolt/washer and nut combination used to splice straight sections and fittings. 5 lbs 50 sets Standard finish: zinc plated | Available in finish: BL WASHER SUPPORT PART NUMBER DESCRIPTION WT. per box QUANTITY per box WASHER SUPPORT 2" square washer that can be used to splice straight sections and fittings. This part can also be used as a hold down method. 6 lbs 50 each Standard finish: zinc plated | Available in finishes: BL, BAR SPLICE PART NUMBER DESCRIPTION WT. per box QUANTITY per box BAR SPLICE Slotted bar 11-15/16" long used to splice straight sections and fittings. 14 lbs 50 each Standard finish: zinc plated | Available in finishes: BL, CORNER SPLICE , PW, CPC , PW, CPC PART NUMBER DESCRIPTION WT. per box QUANTITY per box CORNER SPLICE Kit used to splice fittings. Each kit includes two 90 degree splice bars and 8 sets of the splice kit. 1 lbs 1 kit Standard finish: zinc plated | Available in finishES: BL, , PW, CPC WBTray.com | 10 WALL SUPPORTS SHELF SUPPORT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box SHELF SUPT 4 Shelf/Wall support for 4" wide tray. 0.4 lbs 1 each SHELF SUPT 6 Shelf/Wall support for 6" wide tray. 0.5 lbs 1 each SHELF SUPT 8 Shelf/Wall support for 8" wide tray. 0.6 lbs 1 each SHELF SUPT 12 Shelf/Wall support for 12" wide tray. 1.2 lbs 1 each SHELF SUPT 16 Shelf/Wall support for 16" wide tray. 1.7 lbs 1 each SHELF SUPT 18 Shelf/Wall support for 18" wide tray. 1.9 lbs 1 each SHELF SUPT 20 Shelf/Wall support for 20" wide tray. 2.6 lbs 1 each SHELF SUPT 24 Shelf/Wall support for 24" wide tray. 3.2 lbs 1 each Standard finish: L BRACKET DESCRIPTION WT. per pc. QUANTITY per box L BRACKET 4 Wall L bracket for 4" wide tray. 0.7 lbs 1 each L BRACKET 6 Wall L bracket for 6" wide tray. 0.8 lbs 1 each L BRACKET 8 Wall L bracket for 8" wide tray. 0.9 lbs 1 each L BRACKET 12 Wall L bracket for 12" wide tray. 1.4 lbs 1 each L BRACKET 16 Wall L bracket for 16" wide tray. 1.5 lbs 1 each L BRACKET 18 Wall L bracket for 18" wide tray. 1.7 lbs 1 each L BRACKET 20 Wall L bracket for 20" wide tray. 2.1 lbs 1 each L BRACKET 24 Wall L bracket for 24" wide tray. 2.3 lbs 1 each WT. per pc. QUANTITY per box PART NUMBER 11 | 888.492.8729 | Available in finishes: BL, , PW, CPC DESCRIPTION C BRACKET 4 Wall/Ceiling C bracket for 4" wide tray. 1.2 lbs 1 each C BRACKET 8 Wall/Ceiling C bracket for 8" wide tray. 1.5 lbs 1 each C BRACKET 12 Wall/Ceiling C bracket for 12" wide tray. 2 lbs 1 each C BRACKET 18 Wall/Ceiling C bracket for 18" wide tray. 2.7 lbs 1 each Standard finish: = pre-galvanized finish , PW, CPC PART NUMBER Standard finish: C BRACKET | Available in finishes: BL, | Available in finishes: BL, , PW, CPC CEILING SUPPORTS CENTER SUPPORTS PART NUMBER DESCRIPTION WT. per pc. CENTER SUPT 4 CENTER SUPT 6 CENTER SUPT 8 CENTER SUPT 12 CENTER SUPT 16 CENTER SUPT 18 CENTER SUPT 20 CENTER SUPT 24 Center Support for 4" wide tray. Center Support for 6" wide tray. Center Support for 8" wide tray. Center Support for 12" wide tray. Center Support for 16" wide tray. Center Support for 18" wide tray. Center Support for 20" wide tray. Center Support for 24" wide tray. 1.6 lbs 1.8 lbs 2 lbs 2.7 lbs 3.3 lbs 3.4 lbs 3.8 lbs 4.4 lbs Standard finish: & zinc plated | Available in finishes: BL, CEILING SUPPORTS PART NUMBER WT. per pc. DESCRIPTION TRAPEZE SUPPORTS | Available in finishes: BL, 1 1 1 1 1 1 1 1 each each each each each each each each , PW, CPC CEILING SUPT 12 Profile style support for 12" wide tray & smaller. CEILING SUPT 16 Profile style support for 16" wide tray. CEILING SUPT 18 Profile style support for 18" wide tray. CEILING SUPT 20 Profile style support for 20" wide tray. CEILING SUPT 24 Profile style support for 24" wide tray. Standard finish: QUANTITY per box 1.1 lbs 1.5 lbs 1.6 lbs 1.9 lbs 1.9 lbs QUANTITY per box 1 1 1 1 1 each each each each each , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box TRAP SUPT Trapeze style side support attaches to the side of the tray; suggested for tray sizes 16" wide & smaller. 9 lbs 50pcs/ box Standard finish: | Available in finishes: BL, , PW, CPC TRAPEZE SUPPORTS • No polymer grommets required to hold threaded rod in place • Able to support two individual sections of tray • Works with splice hardware at tray junctions = pre-galvanized finish WBTray.com | 12 ACCESSORIES RADIUS DOWN PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box RADIUS DOWN 4 Radius Down with side panels for increased cable protection. Allows connection between both trays. 2.5 lbs 1 each RADIUS DOWN 6 Radius Down with side panels for increased cable protection. Allows connection between both trays. 3.75 lbs 1 each RADIUS DOWN 12 Radius Down with side panels for increased cable protection. Allows connection between both trays. 7.5 lbs 1 each Standard finish: BL, VERTICAL DOWN , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box VERTICAL DOWN Use the vertical down when dropping cables from the end or the side of tray. 1.5 lbs 1 each Standard finish: Zinc Plated Available finishes: BL, , PW, CPC CABLE DROPOUT PART NUMBER DESCRIPTION QUANTITY per box CABLE DROPOUT UL 94V-0 polymer for cable dropout within the tray. Can be stacked for multiple dropouts. 1 each Standard finish: BL 13 | 888.4WB.TRAY RACK ATTACHMENT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box RACK ATTACHMENT Attaches tray directly to the top of a standard rack. 1 lb 1 kit Standard finish: Zinc Plated | Available finish: BL, CABINET SUPPORT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBTUS4 Independent cabinet support 4" high. 1.9 lbs 1 each WBTUS6 Independent cabinet support 6" high. 2.1 lbs 1 each WBTUS8 Independent cabinet support 8" high. 2.4 lbs 1 each Standard finish: PAN SUPPORT , PW, CPC | Available in finishes: BL, , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box PAN SUPT 2/4/6/8 Cabinet/Underfloor support for tray. 1-3 lb 1 each Standard finish: Available in finishes: BL, , PW, CPC = pre-galvanized finish WBTray.com | 14 ACCESSORIES LABEL CLIP Z BRACKET PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box LABEL CLIP Label Clip attachment for all sizes of tray. 0.1 lb 1 each PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box Z BRACKET 4–24 Support for wall, underfloor or cabinet installation. 1-3 lb 1 each Standard finish: Available in finishes: BL, TERMINATION SUPPORT , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box TERM SUPPORT 6 Wall termination for 6” wide tray. 0.75 lb 1 each TERM SUPPORT 8 Wall termination for 8” wide tray. 1 lb 1 each TERM SUPPORT 12 Wall termination for 12” wide tray. 1.2 lbs 1 each TERM SUPPORT 16 Wall termination for 16” wide tray. 1.4 lbs 1 each TERM SUPPORT 18 Wall termination for 18” wide tray. 1.6 lbs 1 each TERM SUPPORT 20 Wall termination for 20” wide tray. 1.75 lbs 1 each TERM SUPPORT 24 Wall termination for 24” wide tray. 2 lbs 1 each Standard finish: Available in finishes: BL, Custom widths available. BLIND END PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box BLIND END__X__ A solid barrier at tray section end. 1-3 lbs 1 each Standard finish: = pre-galvanized finish 15 | 888.4WB.TRAY , PW, CPC | Available in finishes: BL, , PW, CPC CONDUIT ATTACHMENT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box CONDUIT ATTACHMENT 3 Conduit to tray attachment for 1/2”, 3/4” & 1” Conduit. 1.5 lbs 1 each Standard finish: Available in finishes: BL, ELECTRICAL BOX , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBTELECTRICALBOX Box to tray attachment. 0.75 lb 1 each Standard finish: Available in finishes: BL, GROUND BOLT , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box GROUND BOLT Ground bolt/lug to secure ground wire to tray sections. 1 lb 1 each = pre-galvanized finish WBTray.com | 16 ACCESSORIES FITTING ATTACHMENT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box FITTING ATTACHMENT 2 Use the fitting attachment 2 to fill the gap in 2" tray when creating fittings. 1 lb 1 each FITTING ATTACHMENT 4/6 Use the fitting attachment 4/6 to fill the gap in 4" or 6" tray when creating fittings. 1 lb 1 each Standard finish: Available in finishes: BL, SIDECAR , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box SIDE CAR Additional cable support 2” deep. 0.5 lb 1 each Standard finish: Available in finishes: BL, CABLE GUIDES 17 | 888.492.8729 , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box CABLE GUIDE The cable guide is used to maintain cable bend radius when routing or pulling cables through fittings. It can also be used as a divider for straight sections as well as fittings. 1 lb 1 each WBTFORM WBTFORM Non metallic solutions WBT is proud to introduce WBTFORM, a new system for utilizing flame retardant polymer for use in creating tray inserts and covers. WBTFORM allows you to configure the material as a tray liner or insert, with the option of a flat bottom, or prescored to the tray depth for coverage of the bottom and sides. WBTFORM can even be utilized to envelop the entire tray, providing bottom, side and cover protection. WBTFORM is easily configurable into a variety of solutions from the simple to creative. WBTFORM is: • UL 94V-0 Flame Class Rating. • RoHS compliant. • Non-hydroscopic (moisture absorption <0.1%). • Temperature range to 115°C/239°F. • Easily field configurable. • Can be prescored at the factory for specific applications. • Available in white or black WBTFORM PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBTFORM04 Polymer bottom insert for 4” wide tray 10’ long. 0.5 lb 1 each WBTFORM06 Polymer bottom insert for 6” wide tray 10’ long. 0.65 lb 1 each WBTFORM08 Polymer bottom insert for 8” wide tray 10’ long. 0.75 lb 1 each WBTFORM12 Polymer bottom insert for 12” wide tray 10’ long. 1 lb 1 each WBTFORM16 Polymer bottom insert for 16” wide tray 10’ long. 1.25 lbs 1 each WBTFORM18 Polymer bottom insert for 18” wide tray 10’ long. 1.5 lbs 1 each WBTFORM20 Polymer bottom insert for 20” wide tray 10’ long. 1.75 lbs 1 each WBTFORM24 Polymer bottom insert for 24” wide tray 10’ long. 2.25 lbs 1 each *WBTFORM parts are supplied as one continuous roll. WBTFORM WITH SIDES KEY: WBTFORMdepthXwidth (example: WBTFORM2X12 – 2” deep X 12” wide tray) PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBTFORM__X__ Polymer bottom insert with sides for specific tray depth and width 10’ long. 1 lb 1 each *WBTFORM parts are supplied as one continuous roll. WBTray.com | 18 WBT for Fiber WBT for Fiber Utilizing the proprietary WBTFORM material along with traditional tray and our newly designed covers, WBT has configured a solution to the high price of polymer fiber tray management. WBTFORM provides a solid surface (bottom and sides) to support optical fibers. Traditional tray sections can be configured into curves and spillouts (our new cable dropout), while the newly designed WBT covers simply snap into place. No oversized covers or attachment hardware. The solution provides maximum flexibility and protection for cabling. Need a custom all metal solution, give us a call. We can create solutions for most applications. = pre-galvanized finish 19 | 888.4WB.TRAY COVERS PART NUMBER DESCRIPTION WT. per pc. LENGTH COVER4 Metal cover for 4" wide tray galvanized. 3 lbs 5' COVER6 Metal cover for 6" wide tray galvanized. 3.5 lbs 5' COVER8 Metal cover for 8" wide tray galvanized. 4.5 lbs 5' COVER12 Metal cover for 12" wide tray galvanized. 6 lbs 5' COVER16 Metal cover for 16" wide tray galvanized. 8 lbs 5' COVER18 Metal cover for 18" wide tray galvanized. 8.5 lbs 5' COVER20 Metal cover for 20" wide tray galvanized. 9.5 lbs 5' COVER24 Metal cover for 24" wide tray galvanized. 11 lbs 5' Standard finish: INSERTS , PW, CPC PART NUMBER DESCRIPTION WT. per pc. LENGTH INSERT4 Solid insert used with 4" wide tray galvanized. 3.5 lbs 5' INSERT6 Solid insert used with 6" wide tray galvanized. 5 lbs 5' INSERT8 Solid insert used with 8" wide tray galvanized. 7 lbs 5' INSERT12 Solid insert used with 12" wide tray galvanized. 11 lbs 5' INSERT16 Solid insert used with 16" wide tray galvanized. 13.5 lbs 5' INSERT18 Solid insert used with 18" wide tray galvanized. 16.5 lbs 5' INSERT20 Solid insert used with 20" wide tray galvanized. 18 lbs 5' INSERT24 Solid insert used with 24" wide tray galvanized. 20 lbs 5' Standard finish: DIVIDERS | Available in finishes: BL, | Available in finishes: BL, , PW, CPC PART NUMBER DESCRIPTION WT. per pc. LENGTH DIVIDER2 Divider used with 2" deep tray galvanized. 2 lbs 5' DIVIDER4 Divider used with 4" deep tray galvanized. 5 lbs 5' DIVIDER6 Divider used with 6" deep tray galvanized. 7.5 lbs 5' DIVIDER8 Divider used with 8" deep tray galvanized. 10 lbs 5' Standard finish: | Available in finishes: BL, , PW, CPC = pre-galvanized finish WBTray.com | 20 WBT-U DATACENTER OR GENERAL OFFICE: WBT-U HAS YOU SUPPORTED. WBT introduces another innovation to the marketplace, WBT-U. Too many underfloor/access floor solutions in today’s market are comprised of components that require onsite assembly and configuration. WBT-U solves that problem. With WBT-U, the need to assemble each support, multilevel bars, brackets and complex splicing scenarios are gone. The supports ship as a complete unit. From the box to the floor in seconds, no fabrication or assembly, no tools or fasteners – start to finish. The benefits of WBT-U include: • UL/cUL classified as equipment ground conductor. • Single and Multilevel tray runs can be supported. • WBT-U is zinc whisker free. • Manufactured from PreGalv material, and then mechanically cleaned prior to shipment to remove oils and metallic particles. • Tray lengths from 2’ up to 10’. Less splicing, less supports, lower material and installed cost. • WBT-U is totally self supporting. • Ships as a complete unit. No field fabrication or assembly. • The fastest/quickest installation within a DataCenter environment. • Substantial savings on materials and labor versus other market solutions. KEY: WBTdepthXwidthXlength (example: WBT2X12X4 – 2” deep X 12” wide tray X 4’ long) WBT-U TRAYS 21 | 888.492.8729 PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBT__ X__ X__ Underfloor tray sections for use with WBTUS supports. 1-11 lbs 1 each WBT-U ACCESSORIES SUPPORT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBTUS4 Independent Underfloor support 4" high. 1.9 lbs 1 each WBTUS6 Independent Underfloor support 6" high. 2.1 lbs 1 each WBTUS8 Independent Underfloor support 8" high. 2.4 lbs 1 each WBTUS10 Independent Underfloor support 10" high. 3.0 lbs 1 each WBTUS12 Independent Underfloor support 12" high. 3.5 lbs 1 each WBTUS14 Independent Underfloor support 14" high. 4.1 lbs 1 each WBTUS16 Independent Underfloor support 16" high. 4.7 lbs 1 each WBTUS18 Independent Underfloor support 18" high. 5.3 lbs 1 each Standard finish: MULTI-TIER SUPPORT , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box MULTI-TIER Independent support structure for multiple tray layers. Support is two vertical and one horizontal support, and two attachment kits (U bolt and backer plate). 4 lbs 1 each Standard finish: UNDERFLOOR FITTING | Available in finishes: BL, | Available in finishes: BL, , PW, CPC PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box WBTUFITTING Intersection fitting kit used with WBT0x24x2. 3 lbs 1 kit Standard finish: Available in finishes: BL, GROUND/HOLD DOWN , PW, CPC PART NUMBER DESCRIPTION WT. per box QUANTITY per box GROUND SPLICE Ground/hold down method used with underfloor tray. 7 lbs 50 sets WBTray.com | 22 WBT-U ACCESSORIES PEDESTAL CLAMP PART NUMBER DESCRIPTION WT. per box QUANTITY per box PEDESTAL CLAMP Underfloor support clamp. 0.5 lbs 1 each PART NUMBER DESCRIPTION WT. per box QUANTITY per box PEDESTAL KIT Underfloor support kit. Includes 2 pedestal clamps, profile support and hardware. 3 lbs 1 each Standard finish: PEDESTAL KIT Standard finish: PAN SUPPORT PART NUMBER DESCRIPTION WT. per pc. QUANTITY per box PAN SUPT 2/4/6/8 Cabinet/Underfloor support for tray. 1-3 lb 1 each Standard finish: UNDERFLOOR C BRACKET VERTICAL UP 23 | 888.4WB.TRAY | Available in finishes: BL, , PW, CPC PART NUMBER DESCRIPTION WT. per box QUANTITY per box WBTU6C Multi-tier C bracket used to support 2nd tier of 6" wide tray underfloor. 2 lbs 1 each WBTU12C Multi-tier C bracket used to support 2nd tier of 12" wide tray underfloor. 4 lbs 1 each PART NUMBER DESCRIPTION WT. per box QUANTITY per box VERTICAL UP The Vertical Up is used when transitioning cabling up from a raised computer floor. 1.75 lbs 1 each APPLICATIONS APPLICATIONS FOR WBT Whatever your project details, WBT has a solution (standard or custom) to meet your leadtimes and budgets, and to exceed your expectations. COMMUNICATIONS/DATACOM Largest number/variety of trays and UL certified solutions. Industry Firsts: • WBT shaped wire (patent pending) for increased cable support and minimized cable strain • Green PreGalv finish • WBT-U DataCenter/Access Floor solution • UL Classified on all painted tray colors • 8, 10 & 12” depths available • Black, White and Pewter as standard paint finishes • WBTFORM • Vertical UP for cable routing from underfloor into cabinets or racks INDUSTRIAL/ELECTRICAL • Full offering of solutions to install tray in any industrial environment • Higher loading capabilities allow for higher quantities and heavier cables • Stainless steel tray, mounting accessories and splicing hardware for outdoor, caustic environments, food preparation and marine/offshore • Custom tray configurations and solutions for unique environments • Full inventory of trays and support products for quick ship capabilities MARINE/OFFSHORE • WBT offers Stainless Steel tray, mounting accessories and splicing hardware for marine/offshore • Hot Dipped tray sections for severe/outdoor installation environments • Shaped tray offers higher load capabilities than competitive round/round constructions WBTray.com | 24 APPLICATIONS PERFORMANCE CABLETRAY ™ PreForm ANGLE PAGE 7 RADIUS DOWN PAGE 13 WBT TRAY PAGE 5 WBT-U PAGE 21 25 | 888.4WB.TRAY HEADER COVERS PAGE 19 WBTray.com | 27 HEADER PARTS CATEGORY KEY WBT PreForm PAGE 7 PreForm INTERSECTION PAGE 7 WBT NoSplice PAGE 8 CONFIGURATOR PAGE 9 CABLE DROPOUT PAGE 13 SPLICING PAGE 10 WALL SUPPORTS PAGE 11 CEILING SUPPORTS PAGE 12 PreForm TEE PAGE 7 ACCESSORIES PAGE 13 WBT-U PAGE 21 FIELD CONFIGURED TRAY PAGE 9 28 | 888.4WB.TRAY CONTACT WBT offers unrivaled Customer Support. Our services include the following: • • • • • • Installation assistance Free BOM from your drawings or blueprints Bid Specification Documents Engineering Drawings Design Assistance Custom Fabricated parts for your specific installation needs CONTACT US Email us: sales@WBTray.com Call us toll free: 888.4WB.TRAY (888.492.8729) Call us locally: 618.918.3821 Fax us: 618.918.3825 VISIT US ONLINE: WWW.WBTRAY.COM WBT gives you access to a bevy of valuable online tools and forms such as cut sheets, CSI specs, technical specs, certified test reports & more. As part of a process of ongoing innovation, WBT reserves the right to change specifications without prior notice. This includes changes in product dimensions, materials and finish material/processes and product availability. Please consult WBT for any questions. It is acknowledged that all Trade Marks, Product Data, Logos, etc. used within this catalog are the sole and exclusive property of WBT LLC. WBTray.com | 29 PERFORMANCE CABLETRAY™ 115 Harting Drive Centralia, IL 62801 888.4WB.TR AY WBTR AY.COM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Instance ID : uuid:32a33019-f7e4-2f4b-8666-6e71dd45bdf5 Document ID : xmp.did:C83264740720681180838252D8BAB563 Original Document ID : adobe:docid:indd:31382003-60f9-11e0-a1d5-85a0236c3ef0 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:ED7F11740720681180838252D8BAB563 Derived From Document ID : xmp.did:C7C9969A252068118C149FFC9FB63974 Derived From Original Document ID: adobe:docid:indd:31382003-60f9-11e0-a1d5-85a0236c3ef0 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:6F99F62E412068118083B48689E30794, xmp.iid:7099F62E412068118083B48689E30794, xmp.iid:F20AB988412068118083B48689E30794, xmp.iid:A8840774542068118083B48689E30794, xmp.iid:B2C69AE6212068118C14EFFAA4698A47, xmp.iid:7619DAE6212068118C14EFFAA4698A47, xmp.iid:481B4173222068118C14EFFAA4698A47, xmp.iid:820E8D2F2F2068118C14EFFAA4698A47, xmp.iid:2FF937C5302068118C14EFFAA4698A47, xmp.iid:EA07DC35312068118C14EFFAA4698A47, xmp.iid:5F09F329342068118C14EFFAA4698A47, xmp.iid:9D97B861342068118C14EFFAA4698A47, xmp.iid:E8C0E791352068118C14EFFAA4698A47, xmp.iid:F4006884362068118C14EFFAA4698A47, xmp.iid:F77F1174072068118083C0FC1E01A7F1, xmp.iid:4A1BA274072068118083C0FC1E01A7F1, xmp.iid:FC6A8997112068118083C0FC1E01A7F1, xmp.iid:77D6586A2D2068118083C0FC1E01A7F1, xmp.iid:9B2D512C302068118083C0FC1E01A7F1, xmp.iid:648D4B1B342068118083C0FC1E01A7F1, xmp.iid:B76D6D4F342068118083C0FC1E01A7F1, xmp.iid:67768C87342068118083C0FC1E01A7F1, xmp.iid:17626F9F202068118083B5A0AD419CB7, xmp.iid:451C016C212068118083B5A0AD419CB7, xmp.iid:461C016C212068118083B5A0AD419CB7, xmp.iid:B7A34C74072068118A6D8B65265EDFA9, xmp.iid:0A40945E0E2068118A6D8B65265EDFA9, xmp.iid:3CE208940E2068118A6D8B65265EDFA9, xmp.iid:797E482F242068118C14F3732FD66643, xmp.iid:E933DD8E242068118C14F3732FD66643, xmp.iid:3D12379C2C2068118C14F3732FD66643, xmp.iid:BCCB0EB42E2068118C14F3732FD66643, xmp.iid:03CFF026182068118C14A2F00F433408, xmp.iid:8FC3C4A71B2068118C14A2F00F433408, xmp.iid:5B2F2CF01B2068118C14A2F00F433408, xmp.iid:FEEA73871C2068118C14A2F00F433408, xmp.iid:FEA1B5D01C2068118C14A2F00F433408, xmp.iid:00A2B5D01C2068118C14A2F00F433408, xmp.iid:5EC85068BB2068118C14A2F00F433408, xmp.iid:6A20F7CB10206811822AF29D77E5E223, xmp.iid:DEDDDA2813206811822AF29D77E5E223, xmp.iid:279BCF2B0F20681180838CC74279557D, xmp.iid:2CD1745D1820681180838CC74279557D, xmp.iid:9515095C1920681180838CC74279557D, xmp.iid:015D5EC42120681180838CC74279557D, xmp.iid:025D5EC42120681180838CC74279557D, xmp.iid:237EF5FB2920681180838CC74279557D, xmp.iid:247EF5FB2920681180838CC74279557D, xmp.iid:257EF5FB2920681180838CC74279557D, xmp.iid:24BF6DD82E2068118A6DE8D80D39185D, xmp.iid:EEAB52662F2068118A6DE8D80D39185D, xmp.iid:EFAB52662F2068118A6DE8D80D39185D, xmp.iid:2CD702DD322068118A6DE8D80D39185D, xmp.iid:2DD702DD322068118A6DE8D80D39185D, xmp.iid:E85B8DA8392068118A6DE8D80D39185D, xmp.iid:F77F1174072068118C14BFACD0B16AA1, xmp.iid:6AC82E74072068118C14BFACD0B16AA1, xmp.iid:03801174072068118083EBD2E11BA80C, xmp.iid:EEEADC9B162068118083EBD2E11BA80C, xmp.iid:28398E04232068118083EBD2E11BA80C, xmp.iid:4B57028B262068118083EBD2E11BA80C, xmp.iid:93A83E22272068118083EBD2E11BA80C, xmp.iid:0D60B306292068118083EBD2E11BA80C, xmp.iid:603D1D132A2068118083EBD2E11BA80C, xmp.iid:C88CF1542C2068118083EBD2E11BA80C, xmp.iid:E9BF3D322E2068118083EBD2E11BA80C, xmp.iid:6D1A55CD0B2068119109C57CD8F2D052, xmp.iid:624B1518252068119109C57CD8F2D052, xmp.iid:B3A1FF12262068119109C57CD8F2D052, xmp.iid:E611DB293C2068119109C57CD8F2D052, xmp.iid:464D2652172068118C14AE1B2CFAB6D2, xmp.iid:DEFB41C4172068118C14AE1B2CFAB6D2, xmp.iid:DFFB41C4172068118C14AE1B2CFAB6D2, xmp.iid:E0FB41C4172068118C14AE1B2CFAB6D2, xmp.iid:E1FB41C4172068118C14AE1B2CFAB6D2, xmp.iid:36EE74F6072068118083FF847B710509, xmp.iid:FC6DC4DF122068118083FF847B710509, xmp.iid:CFA495661B2068118083FF847B710509, xmp.iid:CD21971C212068118A6DCB012E2108DB, xmp.iid:9B3C314E232068118A6DCB012E2108DB, xmp.iid:6DEAD05B252068118A6DCB012E2108DB, xmp.iid:D4D26BBB292068118A6DCB012E2108DB, xmp.iid:E4B2F7002B2068118A6DCB012E2108DB, xmp.iid:97F34CF52C2068118A6DCB012E2108DB, xmp.iid:2C7A9368312068118A6DCB012E2108DB, xmp.iid:C0EB64AA322068118A6DCB012E2108DB, xmp.iid:CCADAC71332068118A6DCB012E2108DB, xmp.iid:E8871105132068118C14A9BC4965D8D2, xmp.iid:7BE06E18132068118C14A9BC4965D8D2, xmp.iid:4FFBF94E312068118C14A9BC4965D8D2, xmp.iid:4681356E1B2068118083E65FFBC76E38, xmp.iid:AFDAF9A11C2068118083E65FFBC76E38, xmp.iid:C31DDF17242068118083E65FFBC76E38, xmp.iid:1388E94D242068118083E65FFBC76E38, xmp.iid:1488E94D242068118083E65FFBC76E38, xmp.iid:2015DAA0292068118083E65FFBC76E38, xmp.iid:1EC7F64E2C2068118083E65FFBC76E38, xmp.iid:C4C5B7ED2C2068118083E65FFBC76E38, xmp.iid:C5C5B7ED2C2068118083E65FFBC76E38, xmp.iid:9FF65D52302068118083E65FFBC76E38, xmp.iid:A0F65D52302068118083E65FFBC76E38, xmp.iid:94C60C5E362068118083E65FFBC76E38, xmp.iid:0555916A232068118A6D916795C421E7, xmp.iid:D2BB44A9232068118A6D916795C421E7, xmp.iid:BEA778A9392068118A6D916795C421E7, xmp.iid:5FC23B74072068118083868A659F8C62, xmp.iid:BE6B428C0B2068118083868A659F8C62, xmp.iid:590D7F2E2E2068118083868A659F8C62, xmp.iid:9EC8F40F312068118083868A659F8C62, xmp.iid:0E6213DB322068118083868A659F8C62, xmp.iid:88A530620B2068118083E89F9745CE3C, xmp.iid:3C0354B00A20681188C6D234AAF79EBF, xmp.iid:6F9F577407206811822A9004614C1C1B, xmp.iid:3D9BDAF207206811822A9004614C1C1B, xmp.iid:11D4C78208206811822A9004614C1C1B, xmp.iid:D3E76DC308206811822A9004614C1C1B, xmp.iid:2221FABC12206811822A9004614C1C1B, xmp.iid:D382822515206811822A9004614C1C1B, xmp.iid:F77F1174072068118A6DE65DE10076AC, xmp.iid:FB365D74072068118A6DE65DE10076AC, xmp.iid:511060FE0B2068118A6DE65DE10076AC, xmp.iid:DB730B7A0D2068118A6DE65DE10076AC, xmp.iid:C63523DB0D2068118A6DE65DE10076AC, xmp.iid:F0A29D410E2068118A6DE65DE10076AC, xmp.iid:F1A29D410E2068118A6DE65DE10076AC, xmp.iid:B9380D4E182068118C14B1F972BD6334, xmp.iid:E3931ACB1D20681192B0B0B6A9A2239B, xmp.iid:4FB970562520681192B0B0B6A9A2239B, xmp.iid:4CBB764E2620681192B0B0B6A9A2239B, xmp.iid:1DD64174072068118C14BC92E782B1F9, xmp.iid:D6341C61082068118C14BC92E782B1F9, xmp.iid:38F532E60D2068118C14BC92E782B1F9, xmp.iid:E89799C0102068118C14BC92E782B1F9, xmp.iid:42B12A29112068118C14BC92E782B1F9, xmp.iid:919DE56E112068118C14BC92E782B1F9, xmp.iid:213F8AA3162068118C14BC92E782B1F9, xmp.iid:B4F14B74072068118A6DAE7EFFB75A98, xmp.iid:479CFA5A0B2068118C14ACFC942C5D87, xmp.iid:9B66FCDB0D2068118C14ACFC942C5D87, xmp.iid:9C66FCDB0D2068118C14ACFC942C5D87, xmp.iid:BE003E4A10206811808398C295711F69, xmp.iid:D5AFC4A61C206811808398C295711F69, xmp.iid:71EFF37420206811808398C295711F69, xmp.iid:3FE2DE9825206811808398C295711F69, xmp.iid:C9832A5827206811808398C295711F69, xmp.iid:5CE326A327206811808398C295711F69, xmp.iid:5DE326A327206811808398C295711F69, xmp.iid:EDB5E96E33206811808398C295711F69, xmp.iid:53CF9B47352068118A6D9E13EFA7D744, xmp.iid:07FA2C3B362068118A6D9E13EFA7D744, xmp.iid:78F82BA2372068118A6D9E13EFA7D744, xmp.iid:03D6F6EF1F2068118A6DB6C5F9C647CD, xmp.iid:2A1C8C0A332068118A6DB6C5F9C647CD, xmp.iid:CFEF922D12206811822ABE7391176CCF, xmp.iid:7D4B02D712206811822ABE7391176CCF, xmp.iid:6E82B00114206811822ABE7391176CCF, xmp.iid:36AD70AD14206811822ABE7391176CCF, xmp.iid:FB9C3B8315206811822ABE7391176CCF, xmp.iid:D92807FC282068118A6D89EFDD181E77, xmp.iid:B2CC4855F92068118A6D89EFDD181E77, xmp.iid:73554E74072068118083852787BDBCA2, xmp.iid:7E09303E3B2068118083852787BDBCA2, xmp.iid:C2A1F6A93F2068118083852787BDBCA2, xmp.iid:146806F92C2068118083EAFF2E5EC50A, xmp.iid:0B70505D2D2068118083EAFF2E5EC50A, xmp.iid:6EA2EF432E2068118083EAFF2E5EC50A, xmp.iid:73318CFC2E2068118083EAFF2E5EC50A, xmp.iid:BB1056220B206811822ACD275BF80B38, xmp.iid:B297E0510D206811822ACD275BF80B38, xmp.iid:358268400E206811822ACD275BF80B38, xmp.iid:782403F310206811822ACD275BF80B38, xmp.iid:4C9A1E9911206811822ACD275BF80B38, xmp.iid:0185B19F12206811822ACD275BF80B38, xmp.iid:C601F66613206811822ACD275BF80B38, xmp.iid:97672274072068118083DC64C4BEE4C3, xmp.iid:14D525640A2068118083DC64C4BEE4C3, xmp.iid:E5CBDF20112068118083DC64C4BEE4C3, xmp.iid:86C4974A112068118083DC64C4BEE4C3, xmp.iid:2965831B192068118083DC64C4BEE4C3, xmp.iid:6C5FC18E192068118083DC64C4BEE4C3, xmp.iid:78549E571D2068118083DC64C4BEE4C3, xmp.iid:259EAE74072068118A6DDE8F17F4EB88, xmp.iid:074434D40B2068118A6DDE8F17F4EB88, xmp.iid:FA72701A292068118A6DDE8F17F4EB88, xmp.iid:973B948B2F2068118A6DDE8F17F4EB88, xmp.iid:98107A74072068118083C99CD6B6A7AD, xmp.iid:D342487C092068118083C99CD6B6A7AD, xmp.iid:CEA29E0C0D2068118083C99CD6B6A7AD, xmp.iid:E17FD065262068118083C99CD6B6A7AD, xmp.iid:C46E2805222068118C149FFC9FB63974, xmp.iid:C56E2805222068118C149FFC9FB63974, xmp.iid:C66E2805222068118C149FFC9FB63974, xmp.iid:C7C9969A252068118C149FFC9FB63974, xmp.iid:0D2404D5322068118A6DD54723E59622, xmp.iid:928B6E74072068118083945F7619562A, xmp.iid:C71889C40A2068118083945F7619562A, xmp.iid:ED7F11740720681180838252D8BAB563, xmp.iid:C83264740720681180838252D8BAB563 History When : 2012:06:05 09:23:43-05:00, 2012:06:05 09:23:43-05:00, 2012:06:05 09:26:14-05:00, 2012:06:05 11:41:39-05:00, 2013:06:25 14:37:21-05:00, 2013:06:25 14:37:22-05:00, 2013:06:25 14:41:17-05:00, 2013:06:25 16:12:28-05:00, 2013:06:25 16:23:47-05:00, 2013:06:25 16:26:56-05:00, 2013:06:25 16:48:05-05:00, 2013:06:25 16:49:38-05:00, 2013:06:25 16:58:09-05:00, 2013:06:25 17:04:56-05:00, 2013:06:26 11:45:20-05:00, 2013:06:26 11:45:21-05:00, 2013:06:26 12:57:55-05:00, 2013:06:26 16:17:04-05:00, 2013:06:26 16:36:48-05:00, 2013:06:26 17:04:57-05:00, 2013:06:26 17:06:25-05:00, 2013:06:26 17:07:59-05:00, 2013:07:01 14:09:19-05:00, 2013:07:01 14:15:02-05:00, 2013:07:01 14:42:16-05:00, 2013:07:11 15:22:10-05:00, 2013:07:11 16:11:40-05:00, 2013:07:11 16:13:10-05:00, 2013:07:12 14:33:56-05:00, 2013:07:12 14:36:36-05:00, 2013:07:12 15:34:14-05:00, 2013:07:12 15:49:13-05:00, 2013:07:15 15:45:14-05:00, 2013:07:15 16:10:18-05:00, 2013:07:15 16:12:20-05:00, 2013:07:15 16:16:34-05:00, 2013:07:15 16:18:37-05:00, 2013:07:16 11:13:46-05:00, 2013:07:16 11:13:47-05:00, 2013:07:16 16:25:15-05:00, 2013:07:16 16:42:09-05:00, 2013:07:17 11:59:52-05:00, 2013:07:17 11:59:52-05:00, 2013:07:17 12:06:59-05:00, 2013:07:17 13:07:10-05:00, 2013:07:17 13:32:28-05:00, 2013:07:17 14:05:59-05:00, 2013:07:17 14:35:13-05:00, 2013:07:17 14:44:30-05:00, 2013:07:23 15:39:39-05:00, 2013:07:23 15:43:37-05:00, 2013:07:23 15:47:26-05:00, 2013:07:23 16:08:24-05:00, 2013:07:23 16:21:26-05:00, 2013:07:23 16:57:02-05:00, 2013:07:24 11:07:28-05:00, 2013:07:24 11:07:29-05:00, 2013:08:01 11:54:31-05:00, 2013:08:01 11:54:31-05:00, 2013:08:01 13:23:20-05:00, 2013:08:01 13:48:34-05:00, 2013:08:01 13:52:48-05:00, 2013:08:01 14:13:51-05:00, 2013:08:01 14:13:51-05:00, 2013:08:01 14:35:33-05:00, 2013:08:01 14:43:21-05:00, 2013:08:05 11:11:56-05:00, 2013:08:05 14:12:58-05:00, 2013:08:05 14:19:59-05:00, 2013:08:05 16:58:06-05:00, 2013:08:06 11:52:28-05:00, 2013:08:06 11:55:39-05:00, 2013:08:06 11:56:58-05:00, 2013:08:06 11:59:21-05:00, 2013:08:06 12:10:07-05:00, 2013:08:09 11:06:50-05:00, 2013:08:09 11:06:50-05:00, 2013:08:09 12:07:52-05:00, 2013:08:12 13:40:14-05:00, 2013:08:12 13:55:56-05:00, 2013:08:12 14:10:37-05:00, 2013:08:12 14:41:56-05:00, 2013:08:12 14:51:02-05:00, 2013:08:12 15:05:01-05:00, 2013:08:12 15:36:52-05:00, 2013:08:12 15:45:52-05:00, 2013:08:12 15:51:27-05:00, 2013:08:13 15:33:25-05:00, 2013:08:13 15:33:57-05:00, 2013:08:13 19:10:13-05:00, 2013:08:14 12:14:52-05:00, 2013:08:14 12:23:28-05:00, 2013:08:14 13:16:52-05:00, 2013:08:14 13:18:23-05:00, 2013:08:14 13:54:11-05:00, 2013:08:14 13:56:29-05:00, 2013:08:14 14:15:40-05:00, 2013:08:14 14:20:07-05:00, 2013:08:14 14:31:45-05:00, 2013:08:14 14:44:24-05:00, 2013:08:14 14:52:50-05:00, 2013:08:14 15:27:40-05:00, 2013:08:15 13:58:54-05:00, 2013:08:15 14:00:39-05:00, 2013:08:15 16:38:07-05:00, 2013:08:19 10:38:39-05:00, 2013:08:19 11:07:57-05:00, 2013:08:19 15:36:27-05:00, 2013:08:19 15:36:28-05:00, 2013:08:19 15:49:18-05:00, 2013:08:21 11:17:09-05:00, 2013:08:28 13:36:06-05:00, 2013:08:30 09:51:02-05:00, 2013:08:30 09:54:34-05:00, 2013:08:30 09:58:35-05:00, 2013:08:30 10:00:24-05:00, 2013:08:30 11:11:48-05:00, 2013:08:30 11:29:02-05:00, 2013:09:04 12:06:40-05:00, 2013:09:04 12:06:40-05:00, 2013:09:04 12:39:10-05:00, 2013:09:04 12:49:46-05:00, 2013:09:04 12:52:29-05:00, 2013:09:04 12:55:21-05:00, 2013:09:04 13:13:36-05:00, 2013:09:09 12:01:49-05:00, 2013:09:10 13:49:31-05:00, 2013:09:10 13:49:31-05:00, 2013:09:10 13:56:27-05:00, 2013:09:13 10:21:20-05:00, 2013:09:13 10:27:58-05:00, 2013:09:13 11:07:28-05:00, 2013:09:13 11:27:54-05:00, 2013:09:13 11:30:49-05:00, 2013:09:13 11:32:46-05:00, 2013:09:13 13:15:39-05:00, 2013:09:20 14:57:45-05:00, 2013:09:23 16:08:27-05:00, 2013:09:23 16:26:22-05:00, 2013:09:23 16:43-05:00, 2013:09:24 11:25:27-05:00, 2013:09:24 12:53:56-05:00, 2013:09:24 13:21:10-05:00, 2013:09:24 13:57:58-05:00, 2013:09:24 14:10:28-05:00, 2013:09:24 14:30:16-05:00, 2013:09:24 14:57:44-05:00, 2013:09:24 15:37-05:00, 2013:09:25 15:23:16-05:00, 2013:09:25 15:30:05-05:00, 2013:09:25 15:40:07-05:00, 2013:09:26 13:11:16-05:00, 2013:09:26 15:28-05:00, 2013:09:30 11:44:51-05:00, 2013:09:30 11:49:35-05:00, 2013:09:30 11:57:56-05:00, 2013:09:30 12:02:44-05:00, 2013:09:30 12:08:43-05:00, 2013:10:07 13:38:27-05:00, 2013:10:08 14:29:46-05:00, 2013:10:10 09:33:33-05:00, 2013:10:10 15:44:15-05:00, 2013:10:10 16:15:53-05:00, 2013:10:11 14:32:21-05:00, 2013:10:11 14:35:09-05:00, 2013:10:11 14:41:36-05:00, 2013:10:11 14:46:46-05:00, 2013:10:15 09:46:40-05:00, 2013:10:15 10:02:19-05:00, 2013:10:15 10:08:59-05:00, 2013:10:15 10:28:17-05:00, 2013:10:15 10:32:56-05:00, 2013:10:15 10:40:17-05:00, 2013:10:15 10:45:51-05:00, 2013:10:15 10:55:05-05:00, 2013:10:15 11:16:06-05:00, 2013:10:15 12:04:20-05:00, 2013:10:15 12:05:30-05:00, 2013:10:15 13:01:27-05:00, 2013:10:15 13:04:40-05:00, 2013:10:15 13:31:46-05:00, 2013:10:17 11:19:09-05:00, 2013:10:17 11:50:27-05:00, 2013:10:17 15:19:59-05:00, 2013:10:17 16:06:06-05:00, 2013:10:18 09:31:55-05:00, 2013:10:18 09:46:26-05:00, 2013:10:18 10:11:57-05:00, 2013:10:18 13:13:23-05:00, 2013:10:23 14:24:53-05:00, 2013:10:23 14:33:57-05:00, 2013:10:23 14:50:32-05:00, 2013:10:23 14:50:33-05:00, 2013:10:25 16:15:12-05:00, 2013:11:01 09:19:32-05:00, 2013:11:01 09:43:15-05:00, 2013:12:11 10:23:34-06:00, 2013:12:11 10:23:35-06:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata Create Date : 2013:12:11 10:26:57-06:00 Modify Date : 2013:12:11 10:31:49-06:00 Metadata Date : 2013:12:11 10:31:49-06:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 3667 bytes, use -b option to extract), (Binary data 14585 bytes, use -b option to extract) Doc Change Count : 13011 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 30 Creator : Adobe InDesign CS5.5 (7.5.3)EXIF Metadata provided by EXIF.tools