6AG13321SH527AA0

: Pdf 6Ag13321Sh527Aa0 6AG13321SH527AA0 SiemensImages

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

Data sheet

6AG1332-1SH52-7AA0
SIPLUS LOGO! POWER 24V 4A
SIPLUS LOGO! POWER 24V 4 A FOR MEDIAL STRESS -40...+70
DEGR C BASED-ON 6EP1332-1SH52 .STABILIZED POWER
SUPPLY INPUT: AC (110-300 V DC) OUTPUT: 24 V/

Input
Input

1-phase AC or DC

Rated voltage value Vin rated

100 ... 240 V

Voltage range AC

85 ... 264 V

Input voltage
● at DC

110 ... 300 V

Wide-range input

Yes

Overvoltage resistance

2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min.

40 ms; at Vin = 187 V

Rated line frequency

50 ... 60 Hz

Rated line range

47 ... 63 Hz

Input current
● at rated input voltage 120 V

1.95 A

● at rated input voltage 230 V

0.97 A

Switch-on current limiting (+25 °C), max.

30 A

I²t, max.

2.5 A²·s

Built-in incoming fuse

internal

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker: from 16 A characteristic
B or from 10 A characteristic C

6AG1332-1SH52-7AA0
Page 1/4

25.12.2015

Changes preserved
© Copyright Siemens AG

Output
Output

Controlled, isolated DC voltage

Rated voltage Vout DC

24 V

Total tolerance, static ±

3%

Static mains compensation, approx.

0.1 %

Static load balancing, approx.

1.5 %

Residual ripple peak-peak, max.

200 mV

Residual ripple peak-peak, typ.

30 mV

Spikes peak-peak, max. (bandwidth: 20 MHz)

300 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz)

60 mV

Adjustment range

22.2 ... 26.4 V

Product function Output voltage adjustable

Yes

Output voltage setting

via potentiometer

Status display

Green LED for output voltage OK

On/off behavior

No overshoot of Vout (soft start)

Startup delay, max.

0.5 s

Voltage rise, typ.

15 ms

Rated current value Iout rated

4A

Current range

0 ... 4 A

● Note

+55 ... +70 °C: Derating 2%/K

Active power supplied typical

96 W

Parallel switching for enhanced performance

Yes

Numbers of parallel switchable units for enhanced
performance

2

Efficiency
Efficiency at Vout rated, Iout rated, approx.

89 %

Power loss at Vout rated, Iout rated, approx.

12 W

Closed-loop control
Dynamic mains compensation (Vin rated ±15 %),
max.

0.2 %

Dynamic load smoothing (Iout: 10/90/10 %), Uout ±
typ.

1.5 %

Load step setting time 10 to 90%, typ.

1 ms

Load step setting time 90 to 10%, typ.

1 ms

Protection and monitoring
Output overvoltage protection

Yes, according to EN 60950-1

Current limitation, typ.

5.2 A

Property of the output Short-circuit proof

Yes

Short-circuit protection

Constant current characteristic

Enduring short circuit current RMS value
● maximum
Overload/short-circuit indicator

6AG1332-1SH52-7AA0
Page 2/4

7.9 A
-

25.12.2015

Changes preserved
© Copyright Siemens AG

Safety
Primary/secondary isolation

Yes

Galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN
50178

Protection class

Class II (without protective conductor)

CE mark

Yes

UL/CSA approval

No

Certificate of suitability IECEx

No

Degree of protection (EN 60529)

IP20

EMC
Emitted interference

EN 55022 Class B

Supply harmonics limitation

EN 61000-3-2

Noise immunity

EN 61000-6-2

Operating data
Ambient temperature
● during operation
— Note

-40 ... +70 °C
with natural convection

● during transport

-40 ... +85 °C

● during storage

-40 ... +85 °C

Ambient condition relating to ambient temperature air pressure - installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m);
Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500
m); Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ...
+5000 m)

Relative humidity with condensation maximum

100 %; Relative humidity, incl. condensation / frost permitted (no
commissioning under condensation conditions)

Resistance to biologically active substances
conformity acc. to EN 60721-3-3

Yes; Conformity with EN 60721-3-3, Class 3B2 mold, fungus and
dry rot spores (with the excepion of fauna). The supplied
connector covers must remain on the unused interfaces during
operation!

Resistance to chemically active substances
conformity acc. to EN 60721-3-3

Yes; Conformity with EN 60721-3-3, Class 3C4 incl. salt spray
according to EN 60068-2-52 (degree of severity 3). The supplied
connector covers must remain on the unused interfaces during
operation!

Resistance to mechanically active substances
conformity acc. to EN 60721-3-3

Yes; Conformity with EN 60721-3-3, Class 3S4 incl. Sand, dust.
The supplied connector covers must remain on the unused
interfaces during operation!

Mechanics
Connection technology

screw-type terminals

Connections
● Supply input

L, N: 1 screw terminal each for 0.5 ... 2.5 mm2 single-core/finely
stranded

● Output

+, -: 2 screw terminals each for 0.5 ... 2.5 mm²

● Auxiliary

-

Width of the enclosure

6AG1332-1SH52-7AA0
Page 3/4

90 mm

25.12.2015

Changes preserved
© Copyright Siemens AG

Height of the enclosure

90 mm

Depth of the enclosure

55 mm

Weight, approx.

0.34 kg

Product feature of the enclosure housing for side-byside mounting

Yes

Installation

Snaps onto DIN rail EN 60715 35x7.5/15

Other information

Specifications at rated input voltage and ambient temperature +25
°C (unless otherwise specified)

6AG1332-1SH52-7AA0
Page 4/4

25.12.2015

Changes preserved
© Copyright Siemens AG