736530 Instructions

2017-03-09

: Pdf 736530 Instructions 736530_Instructions product s

Open the PDF directly: View PDF PDF.
Page Count: 2

Download736530 Instructions
Open PDF In BrowserView PDF
20” High Velocity Floor Fan

Use a “QR Code App” on
your smart phone to access
our website and browse our
entire product offering or go
to: www.hurricane-fans.com

20” High Velocity
Floor Fan
Instruction Guide
™

™

www.hurricane-fans.com

www.hurricane-fans.com

SAFETY
CAUTION
Read Rules for Safe Operation and Instructions carefully.
WARNING
1. To reduce the risk of fire or electric shock, do not use this fan with
any solid-state speed control device.
2. This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safely feature.
3. To reduce the risk of fire or electric shock, DO NOT use this fan with
any solidstate speed control devices.
4. Do not leave the fan running unattended.
5. Please make sure the voltage of the power supply is the same as
shown on the fan nameplate.
RULES FOR SAFETY OPERATION
1. Never insert fingers, pencils, or any other object through the grille
when fan is running.
2. Disconnect fan when moving from one location to another.
3. Disconnect fan when removing grilles for cleaning.
4. Be sure fan is on stable surface when operating to avoid overturning.
5. DO NOT use fan in window, rain may create electrical hazard.
6. Indoor use only.
PART NAMES
1. Front Guard 2. Blade 3. Screw 4. Motor 5. Stand 6. Rear Guard
7. Nut 8. Screw 9. Spring Washer 10. Washer 11. Power Cord
12. Switch Box 13. Bolt 14. Plastic Washer 15. Knob 16. Nut 17. Screw

1

2

17

3

16

4

15

5

6

7

14 13

8

9 10

12

11

OPERATING INSTRUCTIONS
1. 	Only operate the fan with the recommended voltage designated on
the fan rating label.
2.	 To adjust fan speed turn the speed control knob located on the
switch box to the desired speed:
0---Stop 1—Low 2—Medium 3—High
3.	 Adjust the tilt angle of the fan head by pushing the grille up or
down to the desired position.
RULES FOR SAFETY OPERATION
a) 	Never leave the fan running unattended. Unplug the fan when not
in use.
b) 	Position fan in an area that is free from obstructions. This will help
to keep the fans air intake and discharge grille free from blockage.
c) 	Never connect the fan to a power source while disassembled.
d) 	Never insert fingers or any other object through the grille while the
fan is running.
e) 	Unplug from outlet when not in use or cleaning.
f) 	 If the power cord is damaged – discontinue the use immediately
g) 	Do not cover the power cord with a rug, carpet or other material.
Keep the power cord out of high traffic areas to avoid injury or
damage to the cord.
CLEANING AND MAINTENANCE
a. 	Always unplug the fan before cleaning.
b. 	Do not allow water to drip on or enter into the fan motor housing.
c. 	 Use a soft dry cloth to clean exterior fan grille and motor housing.
d. 	Do not use chemicals to clean the fan
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:5b444e52-c833-934d-ba03-230e4bc42074
Original Document ID            : adobe:docid:indd:3f1cffb0-3eb7-11dc-aa36-e67b18171153
Document ID                     : xmp.id:BFBFEB5C1D206811822AA72A28220554
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:3E12D47B1220681188C6937BB59B2933
Derived From Document ID        : xmp.did:105833A92120681188C6C73C42B57B62
Derived From Original Document ID: adobe:docid:indd:3f1cffb0-3eb7-11dc-aa36-e67b18171153
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2013:10:21 12:41:02-07:00
Create Date                     : 2013:10:21 12:41:02-07:00
Modify Date                     : 2013:10:21 12:41:04-07:00
Metadata Date                   : 2013:10:21 12:41:04-07:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu