Hydrel Intro Pages Rev 78786 Catalog

: Pdf 78786-Catalog 78786-Catalog Batch12 unilog

Open the PDF directly: View PDF .
Page Count: 96

Download
Open PDF In Browser	View PDF

Outdoor
Lithonia Lighting outdoor products are unmatched in the industry for
distinctive designs, signature accents and high-performance optical
systems.

These high-quality products are characterized by superior-grade
materials for reliability, highly-engineered designs for performance, and
skilled craftsmanship for aesthetic styling.

With a wide selection of luminaires, poles, mounting options and
finishes, Lithonia Lighting is your best choice for every architectural and
general purpose lighting application.

426

Outdoor / PSG8

www.lithonia.com

CONTENTS

www.lithonia.com

Area Lighting

428

Security Lighting

442

Roadway Lighting

444

Site Lighting

448

Floodlighting

452

Sportslighting

469

Building-Mounted Lighting

471

Garage/Canopy Lighting

481

Options & Accessories

484

Poles

494

Outdoor / PSG8

427

Area Lighting

Architectural Arm-Mounted Cutoff
™

Aeris

Intended Use
For streets, walkways, parking lots and
surrounding areas.
Features
Housing – Die-cast single-piece aluminum with nominal 1/8" wall thickness. Integral arm provides easy installation to
pole or wall. Housing completely sealed
against moisture or environmental contaminants.
Door Assembly – Die-cast door frame, impact-resistant, tempered, glass lens, 3/16"
thick, fully sealed with one-piece tubular
silicone gasket. Tool-less entry and closure via spring-loaded die-cast latches.
Optics – Anodized segmented reflectors
for superior uniformity and control. Reflectors attach with tool-less fasteners
and are rotatable and interchangeable.
Installation – Heavy-duty easy-mount
block attaches to pole or wall to provide
ease of installation as well as ensured

Ordering Information

Example: AS1 150S SR2 120 SPA SF LPI

Mounting 11

Designation

Distribution

Voltage

High Pressure Sodium
AS1 35S1
AS1 50S 2
AS1 70S
AS1 100S
AS1 150S
AS2 200S
AS2 250S
AS2 400S
Metal Halide
AS1 50M 3
AS1 70M 3
AS1 100M
AS1 150M4
AS1 175M
AS2 200M5
AS2 250M4
AS2 320M5
AS2 350M5
AS2 400M4
Compact Fluorescent
AS1 2/32TRT 6
AS1 42TRT
AS1 2/42TRT 6
AS1 57TRT
AS1 70TRT

SR2 Segmented Type II
roadway
SR3 Segmented Type III
asymmetric
SR4SC Segmented Type IV
forward throw,
sharp cutoff
SR4W Segmented Type IV
wide, forward throw
(size 2 only)
SR5S Segmented Type V
square

120, 2087, 2407,
277, 347, 4807,
TB8, MVOLT9,10

NOTES:
1
2
3
4
5
6
7
8
9
10

11
12
13

120V only.
120V & 277V only.
Not available with 480V.
May be ordered with SCWA option.
Must be ordered with SCWA option.
Available in SR3 only.
Consult factory for availability in Canada.
Optional multi-tap ballast (120V, 208V, 240V, 277V).
In Canada 120V, 277V, 347V; ships as 120V/347V.
Compact Fluorescent only, 120V-277V.
Multi-volt electronic ballast (for TRT lamps) capable of operating on any line voltage between
120V & 277V.
Mounting block standard.
SF, DF or QRS options cannot be ordered together.
Consult factory for availability.

Included
SPA

Square pole mounting
block
RPA Round pole mounting
block
WBA wall bracket (up or
down)
Shipped separately
ASKMA1 Mast arm adapter (size 1)
ASKMA2 Mast arm adapter (size 2)
DSAS1 Decorative straight arm,
square pole only (size 1)
DSAS2 Decorative straight arm,
square pole only (size 2)
DCAS1 Decorative curved arm,
square pole only (size 1)
DCAS2 Decorative curved arm,
square pole only (size 2)

Drilling Pattern
(see pole ordering, pg. 494)
DM19AS
1 at 90°
DM28AS
2 at 180°
DM29AS
2 at 90°
DM39AS
3 at 90°
DM49AS
4 at 90°
DM32AS
3 at 120°
(Round poles only)

Dimensions are shown in inches (centimeters) unless
otherwise noted.

H

428

Outdoor / PSG8

alignment and leveling.
Electrical – 150W and below utilize a high
reactance, high power factor. 175W and
above use a constant-wattage autotransformer ballast. Compact fluorescent uses
an electronic high frequency ballast. Ballasts mounted on removable power tray
with tool-less latch and have positive locking disconnect plugs. Ballasts are copper
wound and 100% factory tested.
Finish – Standard finish is dark bronze (DDB)
corrosion-resistant polyester powder finish. Other architectural colors available.
Socket – Porcelain, medium-base socket
for AS1, mogul-base socket for AS2 , with
copper alloy nickel-plated screw shell and
center contact. UL listed.
Listings – UL Listed (standard). CSA Certified or NOM certified (see Options). UL
listed for wet locations in lens-down orientation (damp location listed in lens-up
orientation. Meets IESNA full cutoff criteria. U.S. patent no. D447, 590. Canadian
patent no. 94324.

EPA
Length
Width
Height
Weight

AS1
.7 ft2
21.38 (54.5 cm)
12.5 (31.7 cm)
6.28 (15.9 cm)
22 lbs (10 kg)

AS2
1.2 ft2
28 (71.0 cm)
16.25 (41.9 cm)
8.25 (21.0 cm)
45 lbs (20.4 kg)

www.lithonia.com
keyword: AS

Options/Accessories
Installed
SF Single fuse, 120V, 277V, 347V (n/a
TB & MVOLT)12
DF Double fuse, 208V, 240V, 480V (n/a
TB & MVOLT)12
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system (100W max.
AS1, 250W max. AS2, lamp not
included)12
CR Enhanced corrosion resistance
HS House-side shield (n/a with
SR4SC)
EC Emergency circuit13
TP Tamperproof
SCWA Super CWA pulse start ballast (not
available with HPS, TRT, 50, 70,
100M or 480V)
LPI Lamp included (standard)
L/LP Less lamp
CSA CSA Certified
NOM NOM Certified13
For optional architectural colors, see page 485.

Shipped separately
PE1 NEMA twist-lock PE (120V, 208V,
240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
AS1VG Vandal guard
AS2VG Vandal guard
For tenon slipfitters, see page 486.

Architectural Arm-Mounted Cutoff

Area Lighting

with (3) quarter-turn closing screws. Can
be hinged from any of the four sides.
Lens – .125"-thick, impact-resistant tempered glass.
Mounting – Extruded 4" aluminum arm for
square pole mounting,shipped in fixture
carton as standard. Optional mountings
available.
Electrical – High reactance, high power
factor for 150W and below. Constant wattage autotransformer for 175W and above.
Copper wound and 100% factory tested.
Removable power tray and positive-locking disconnect plug.
Socket – Medium-base socket for 100W
MH and below. Mogul-base porcelain socket with copper alloy, nickel-plated screw
shell and center contact. UL listed 1500W600V. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations.

KSE

Intended Use
For car lots, street lighting or parking areas.
Features
Housing – Rugged, heavy-gauge, extruded aluminum housing. Square shape, seamwelded and internally sealed for weathertight integrity. Standard finish is dark bronze
corrosion-resistant polyester powder
(DDB). Architectural Class 1 anodize finish
and other architectural colors available.
Optics – Anodized, segmented reflectors
for uniformity and control. Reflectors are
tool-less, rotatable and interchangeable.
Five cutoff distributions available: R2 (Roadway), R3 (Asymmetric), R4SC (Forward
Throw, Sharp Cutoff), R4W (Wide, Forward
Throw) and R5S (Symmetric).
Door Frame – Naturally anodized, extruded
aluminum door frame sealed to housing by
silicone closed-cell gasket and secured

Ordering Information

Designation
High Pressure
Sodium
KSE1
70S
KSE1
100S
KSE1
150S
KSE2
250S
KSE2
400S
Metal Halide
KSE1
100M
KSE1
150M
KSE1
175M
KSE1
200M1
KSE2
250M
KSE2
320M 1,2
KSE2
350M 1,2
KSE2
400M 2

Example: KSE1 150S R2 120 SP09 PER

Distribution

Voltage

Mounting

R2 Type II roadway
R3 Type III asymmetric
R4SC Type IV forward
throw, sharp cutoff
R4W Type IV wide,
forward throw (size
2 only)
R5S Type V square (size
2 only)

120
208 3
240 3
277
347
480 3
TB 4

Included
SP04 4" square pole arm5 (std.)
SP09 9" square pole arm
RP04 4" round pole arm5
RP09 9" round pole arm
WW04 4" wood pole or wall5
WW09 9" wood pole or wall
WB04 4" wall bracket
WB09 9" wall bracket
Shipped separately
KMA Mast arm adapter
KTMB Twin mounting bar
DA12P Degree arm (pole)
DA12WB Degree arm (wall)

Options/Accessories
Installed
SF Single fuse, 120V, 277V, 347V
(n/a TB)
DF Double fuse, 208V, 240V, 480V
(n/a TB)
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system (100W max.
in KSE1, 150 W max in KSE2, 120V
lamp not included).
CR Enhanced corrosion resistance
EC Emergency circuit
GSL Glass sag lens6
SCWA Super CWA pulse start ballast
(n/a with HPS or 100, 175M)
CSA CSA Certified
NOM NOM Certified (consult factory)
For optional architectural colors, see page 485.

NOTES:
1 Must be ordered with SCWA.
2 Must use ED28 lamp.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
5 Use 9" arm when mounting two luminaires at 90°.
6 Available on KSE2 only.
7 PER must be ordered with fixture.

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA7
Square
Height
Max. weight

KSE1
1.3 ft2 (.12 m2)
1511/16 (39.8)
83/4 (22.2)
26.6 lbs (12.1 kg)

KSE2
1.9 ft2 (.18 m2)
19 (48.3)
1015/16 (27.8)
39.9 lbs (18.1 kg)

Shipped separately
PE1 NEMA twist-lock PE (120V-240V)7
PE3 NEMA twist-lock PE (347V)7
PE4 NEMA twist-lock PE (480V)7
PE7 NEMA twist-lock PE (277V)7
SC Shorting cap for PER option
KSE1HS House-side shield (R2, R3 only)
KSE2HS House-side shield (R2, R3 only)
KSE1VG Vandal guard
KSE2VG Vandal guard
For tenon slipfitters, see page 486.

H
Arm

www.lithonia.com
keyword: KSE

Square

Outdoor / PSG8

429

Area Lighting

Architectural Arm-Mounted Cutoff

KSF

Optics – Anodized segmented reflectors
provide superior uniformity and control.
KSF1/KSF2 reflectors are rotatable and interchangeable. KSF3 Type IV are only rotatable but not interchangable. Five cutoff
distributions available: R2 (Roadway), R3
(Asymmetric), R4SC (Forward Throw, Sharp
Cutoff), R4W (Wide, Forward Throw), R5S
(Square).
Electrical – High reactance, high power
factor for 150W and below. Constant wattage autotransformer for 175W and above.
Copper wound and 100% factory tested.
Removable power door and positive-locking disconnect plugs.
Socket – Porcelain, horizontally oriented,
mogul-base socket (100M & 150M are medium-base) with copper alloy, nickel-plated
screw shell and center contact. UL listed
1500W, 600V.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations.

Intended Use
For car lots, street lighting or parking areas.

Spec-Form ®

Features
Housing – Rugged, heavy-gauge, aluminum
rectilinear housing. All seams continuously
welded for weathertight integrity. Dark
bronze corrosion-resistant polyester powder finish (DDB) standard. Other architectural colors available
Door Frame – Natural, anodized, extruded
aluminum frame with mitered corners, retained with two hinge pins and secured
with one quarter-turn, quick-release fastener. Integrally designed, extruded silicone gasket provides weatherproof seal
between housing and frame.
Lens – .125" thick, impact-resistant tempered glass with thermally applied, silkscreened power door shield.
Mounting – Extruded 4" (KSF1, KSF2) or 12"
(KSF3) aluminum arm for square pole mounting shipped in fixture carton as standard.
Optional Mountings available.

Ordering Information

Distribution

Voltage

Mounting

Options/Accessories

R2 Type II roadway
(sizes 1 & 2 only)
R3 Type III asymmetric
R4 Type IV foward
throw (size 3 only)
R4SC Type IV forward
throw, sharp
cutoff (sizes 1 & 2
only)
R4W Type IV wide,
forward throw
(size 2 only)
R5S Type V square
(sizes 2 & 3 only)

120
208 4
240 4
277
347
480 4
TB 5

Included, KSF1/KSF2
SP04 4" square pole arm6 (std.)
SP09 9" square pole arm
RP04 4" round pole arm6
RP09 9" round pole arm
WW04 4" wood pole or wall6
WW09 9" wood pole or wall
WB04 4" wall bracket
WB09 9" wall bracket
MB Mounting bracket
L/ARM When ordering KMA or
DA12
Included, KSF37
SP12 12" square pole arm (std.)
RP12 12" round pole arm
WW12 12" wood pole or wall
WB12 12" wall bracket
Shipped separately8
KMA Mast arm adapter
KTMB Twin mounting bar
DA12P Degree arm (pole)
DA12WB Degree arm (wall)

Installed
SF Single fuse, 120V, 277V, 347V
(n/a TB)
DF Double fuse, 208V, 240V, 480V
(n/a TB)
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system( 75W max in
KSF1, not to exceed HID wattages
on size 2;250W max. on KSF3, 120V
lamp not included)9
CR Enhanced corrosion resistance
EC Emergency circuit
SCWA Super CWA pulse start ballast (n/a
with HPS, 100M, 175M)
CSA CSA Certified
NOM NOM Certified (consult factory)

Designation
High Pressure
Sodium
KSF1
70S
KSF1
100S
KSF1
150S
KSF2
250S
KSF2
400S
KSF3
1000S
Metal Halide
KSF1
100M
KSF1
150M
KSF1
175M
KSF1
200M 1
KSF1
250M
KSF2
320M 1,2
KSF2
350M 1,2
KSF2
400M 2
KSF3
1000M 3

Example: KSF1 150S R2 120 SP09 PER

Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA11
Length
Width
Height
Max. weight

430

KSF1
1.5 ft2 (.14 m2)
22 (55.9)
163/16 (41.1)
71/4 (18.4)
39 lbs (17.7 kg)

KSF2
2.0 ft2 (.19 m2)
255/26 (64.3)
181/2 (47.0)
85/16 (21.1)
55 lbs (24.9 kg)

Outdoor / PSG8

KSF3
3.0 ft2 (.28 m2)
305/16 (77.0)
245/16 (61.8)
101/2 (26.7)
85 lbs (38.6 kg)

NOTES:
1 Must be ordered with SCWA.
2 Must use ED28 lamp.
3 Must use BT37 lamp.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V).
In Canada 120V, 277V, 347V; ships as 120V/347V.
6 Use 9" arm when mounting two luminaires at 90°.
7 Use 12" arm when mounting two luminaires at 90o.
8 May be ordered as accessory.
9 QRSTD available in select wattages. Consult factory.
10 PER option must be ordered with fixture.
11 Includes mounting arm.

www.lithonia.com
keyword: KSF

For optional architectural colors, see page 485.

Shipped
PE1
PE3
PE4
PE7
SC
KSF_HS

Separately
NEMA twist-lock PE (120V-240V)10
NEMA twist-lock PE (347V)10
NEMA twist-lock PE (480V)10
NEMA twist-lock PE (277V)10
Shorting cap for PER option
House-side shield (KSF1/KSF2: R2
and R3 only. KSF3 - R3 and R4 only)
KSF_VG Vandal guard (KSF1/KSF2 only)

For tenon slipfitters, see page 486.

Area Lighting

Arm-Mounted Drop or Flat Lens Cutoff
Intended Use
For parking areas, street lighting, walkways and car lots.
Features
Housing – Rugged, die-cast, soft-corner
aluminum housing with 0.12" nominal wall
thickness. Extruded 4" soft corner arm for
pole or wall mounting is standard.
Door Frame – KAD die-cast door frame
has impact-resistant, tempered glass lens
which is fully gasketed with one-piece
bonded tubular silicone. KAC die-cast aluminum door frame has prismatic, impactresistant, tempered glass, drop dish acrylic lens or drop dish polycarbonate lens.
Door frame is fully gasketed with one-piece
tubular silicone.
Optics – KAD reflectors are anodized hydroformed and segmented aluminum. Four
cutoff distributions available: R2 (Roadway), R3 (Asymmetric), R4 (Forward Throw)
and R5 (Symmetric). Segmented reflectors
are rotatable and field-interchangable.

KAD

KAC reflector is optical-quality aluminum
that works in tandem with a light-diffusing
prismatic lens.
Electrical – Ballast is high-reactance, high
power factor (70-150W HPS,100M &150M)
or high power factor constant-wattage autotransformer (175-400W MH & HPS). Ballast is copper wound and 100% factory
tested.
Finish – Dark bronze (DDB) corrosion-resistant polyester powder finish (DDB), with
other architectural colors available.
Socket – Porcelain, horizontally (position)
oriented mogul-base socket (100M & 150M
are medium-base) with copper alloy, nickel-plated screw shell and center contact.
UL listed 1500W-600V. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations. IP65 certified.

Ordering Information

Contour

®

Example: KAD 400M R3 120 SPD09

Designation

Distribution

Voltage

Mounting

High Pressure Sodium
KAD 70S
KAD 100S
KAD 150S
KAD 250S
KAD 400S
Metal Halide
KAD 100M
KAD 150M
KAD 175M
KAD 200M 1
KAD 250M
KAD 320M 1
KAD 350M 1
KAD 400M

KAD–Hydroformed Reflectors
R2 Type II roadway
R3 Type III asymmetric
R4 Type IV forward
throw, sharp cutoff
R5S Type V square
Segmented Reflectors
SR2 Type II asymmetric
SR3 Type III asymmetric
SR4SC Type IV forward
throw, sharp cutoff

120
2082
2402
277
347
4802
TB 3

Included
SPD04 4" square pole arm4 (std.)
SPD09 9" square pole arm
RPD04 4" round pole arm4
RPD09 9" round pole arm
WWD04 4" wood pole or wall4
WWD09 9" wood pole or wall
WBD04 4" wall bracket
WBD09 9" wall bracket
Shipped separately
KMA Mast arm adapter
KTMB Twin mounting bar
DAD12P Degree arm (pole)
DAD12WB Degree arm (wall)

Options/Accessories
Installed
LPI
SF
DF
PER
QRS
PD
WTB
EC
SCWA
CSA
NOM

Lamp included
Single fuse, 120V, 277V, 347V (n/a TB)
Double fuse, 208V, 240V, 480V (n/a TB)
NEMA twist-lock receptacle only (no
photocontrol)
Quartz restrike system (250W max.,
120V lamp not included)5
Power tray6
Terminal bock 6
Emergency circuit
Super CWA pulse start ballast (n/a with
any HPS, 100M or 175M)
CSA Certified
NOM Certified (consult factory)

For optional architectural colors, see page 485.

Shipped separately 7
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
HS House-side shield (R2, R3, R4) (SR2, SR3)
KADVG Vandal guard
KADWG Wireguard
NOTES:
1 Must be ordered with SCWA.
2 Consult factory for availability in Canada.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
4 SPD09, RPD09 or WWD09 must be used when luminaires
are oriented on DM29, DM39 or DM49 drilling pattern.
5 QRSTD available in select wattages. Consult factory.
6 Only available with SR2, SR3, SR4CS optics.
7 May be ordered as an accessory.
8 Includes mounting arm.

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA8
Square
Height
Max. weight

KAD
1.2 ft2 (.11 m2)
171/2 (44.5)
71/8 (18.1)
42 lbs (19.1 kg)

H

L
www.lithonia.com
keyword: KAD-KAC

Outdoor / PSG8

431

Area Lighting

Arm-Mounted Drop or Flat Lens Cutoff

KAC

Intended Use
For parking areas, street lighting, walkways and car lots.

®

Contour

Features
Housing – Rugged, die-cast, soft-corner
aluminum housing with 0.12" nominal wall
thickness. Extruded 4" soft corner arm for
pole or wall mounting is standard.
Door Frame – KAD die-cast door frame
has impact-resistant, tempered glass lens
which is fully gasketed with one-piece
bonded tubular silicone. KAC die-cast aluminum door frame has prismatic, impactresistant, tempered glass, drop dish acrylic lens or drop dish polycarbonate lens.
Door frame is fully gasketed with one-piece
tubular silicone.
Optics – KAD reflectors are anodized hydroformed & segmented aluminum. Four
cutoff distributions available: R2 (Roadway), R3 (Asymmetric), R4 (Forward Throw)
and R5 (Symmetric). Segmented reflectors

Ordering Information

are rotatable and field-interchangable.
KAC reflector is optical-quality aluminum
that works in tandem with a light-diffusing
prismatic lens.
Electrical – Ballast is high-reactance, high
power factor (70-150W HPS,100M &150M)
or high power factor constant-wattage autotransformer (175-400W MH & HPS). Ballast is copper wound and 100% factory
tested.
Finish – Dark bronze (DDB) corrosion-resistant polyester powder finish (DDB), with
other architectural colors available.
Socket – Porcelain, horizontally (position)
oriented mogul-base socket (100M & 150M
are medium-base) with copper alloy, nickel-plated screw shell and center contact.
UL listed 1500W-600V. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations. IP65 certified.

Example: KAC 250M DPA 120 SPD09

Designation

Distribution

High Pressure Sodium
KAC
150S
KAC
250S
KAC
400S
Metal Halide
KAC
100M
KAC
150M
KAC
175M
KAC
200M 1
KAC
250M
KAC
320M 1,2
KAC
350M 1,2
KAC
400M 2

KAC (prismatic lens)
FP Flat C73T
DPA Drop acrylic
DPP Drop polycarbonate

Voltage
120
208 3
240 3
277
347
480 3
TB 4

Options/Accessories

Mounting
Included
SPD04 4" square pole arm5 (std.)
SPD09 9" square pole arm
RPD04 4" round pole arm5
RPD09 9" round pole arm
WWD04 4" wood pole or wall5
WWD09 9" wood pole or wall
WBD04 4" wall bracket
WBD09 9" wall bracket
Shipped separately
KMA Mast arm adapter
KTMB Twin mounting bar
DAD12P Degree arm (pole)
DAD12WB Degree arm (wall)

Installed
LPI
SF
DF
PER
QRS
PD
WTB
EC
SCWA
CSA
NOM

Lamp included
Single fuse, 120V, 277V, 347V (n/a TB)
Double fuse, 208V, 240V, 480V (n/a TB)
NEMA twist-lock receptacle only
(no photocontrol)
Quartz restrike system (250W max.,
120V lamp not included)6
Power tray7
Terminal bock 7
Emergency circuit
Super CWA pulse start ballast (n/a
with any HPS, 100M or 175M)
CSA Certified
NOM Certified (consult factory)

For optional architectural colors, see page 485.
Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA9
Square
Height
Max. weight

KAC DP
1.4 ft2 (.13 m2)
171/2 (44.5)
111/8 (28.3)
40 lbs (18.1 kg)

KAC FP
1.2 ft2 (.11 m2)
171/2 (44.5)
71/8 (18.1)
42 lbs (19.1 kg)

NOTES:
1 Must be ordered with SCWA.
2 Requires ED28 lamp when ordered with SR2, SR3 or
SR4C distributions.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
5 SPD09, RPD09 or WWD09 must be used when luminaires
are oriented on DM29, DM39 or DM49 drilling pattern.
6 QRSTD available in select wattages. Consult factory.
7 Only available with SR2, SR3, SR4CS optics.
8 May be ordered as an accessory.
9 Includes mounting arm.

H
L

432

Outdoor / PSG8

www.lithonia.com
keyword: KAD-KAC

Shipped separately8
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
HS House-side shield (R2, R3, R4)
(SR2, SR3)
KADVG Vandal guard
KADWG Wireguard

Area Lighting

Die-Cast Cutoff with Pole
Intended Use
For parking areas, street lighting, walkways
and car lots.
Features
Configuration – Choice of single-mount
(KC1) or double-mount (KC2).
Housing – Rugged, die-cast, soft-corner aluminum housing with 0.12" nominal wall thickness. Extruded 4" soft corner arm for square
pole mounting. Dark bronze (DDB) corrosion-resistant polyester powder finish.
Door Frame – Die-cast door frame has
impact-resistant, tempered glass lens
which is fully gasketed with one-piece
bonded tubular silicone.
Lamp – Lamp included in fixture carton.
Electrical – Ballast is high-power factor,
constant wattage, autotransformer, copper wound and 100% factory tested.
Socket – Porcelain, horizontally (position)
oriented mogul-base socket with copper

KC

alloy, nickel-plated screw shell and center
contact. UL listed 1500W-600V. 4KV pulse
rated.
Poles – Straight square steel, pre-drilled
for single or double mount. Plugs included
to close off unused mounting holes.
Finish – Fixture and pole are finished with
dark bronze (DDB) corrosion-resistant polyester powder.
Optics – Reflectors are anodized hydroformed/segmented aluminum. Two cutoff
distributors available: R3 (Asymmetric)
(std.) and R4 (Forward Throw).
Listings – UL Listed (standard). CSA Certified
(see Options). UL listed for wet locations.

KAD Combo
Contour ®

Ordering Information

Designation 1

Example: KC1 250M 20C R3 4C

Lamp
Metal Halide
250M
400M

KC1 Single mount
KC2 Double mount

16C
20C
25C
25G

Pole length

Distribution

16-foot
20-foot
25-foot
25-foot

R3 Type III
asymmetric
(standard)
R4 Type IV
forward
throw, sharp
cutoff

"C"
"C"
"C"
"G"

pole
pole
pole
pole

Maximum Wind Load2

Pole diameter
4C
4G

4-inch "C" pole
4-inch "G" pole

Pole KC1 Single KC2 Double
16' 4C 100 MPH 100 MPH
20' 4C 100 MPH 100 MPH
25' 4C
90 MPH
90 MPH
25' 4G 100 MPH
100MPH
Wind Shown with 1.3 gusts

Typical Layouts using KC2 “twin” combos

Wattage
(2) 400M R3
(2) 250M R3

Pole*
25'
20'

Designing for
0.5 fc minimums
Spacing
Avg. fc

Designing for
1.0 fc minimums
Spacing
Avg. fc

120'x120'
120'x 100'

120'x80'
60'x110'

2.5
1.7

3.9
3.0

* Light levels assume 3' concrete base

NOTES:
1 Ships with multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
2 Wind load shown with 1.3 gusts.
3 Includes arm.
* Consult KAD or SSS specification sheets for additional
information if needed.

Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA3
Square
Height
Arm length
Max. weight

KC
1.2 ft2 (.11 m2)
171/2 (44.5)
71/8 (18.1)
4 (10.2)
42 lbs (19.1 kg)

www.lithonia.com
keyword: KC

Outdoor / PSG8

433

Area Lighting

Architectural Vertical Cutoff

KVF

Intended Use
For car lots, street lighting or parking areas.
Features
Construction – Heavy-gauge, die-formed
aluminum housing, fabricated using robotic continuous seam-weld process for
weathertight integrity. Integral structural
support plate for mounting arm and electrical components. Hinged aluminium door
frame with stainless steel hardware. Continuous silicone gasketing surrounds lens.
Finish – Standard finish is dark bronze
corrosion-resistant electrostatically applied powder paint. Optional linear embossed accent reveals are available.
Optics – Vertical-lamp reflectors are onepiece spun and formed anodized aluminum. Horizontal-lamp reflectors also available. Mogul-base porcelain socket with
copper alloy, nickel-plated screw shell and

Ordering Information

center contact. Horizontal position-oriented for types R2, R3 and R4. Reflectors are
rotatable and interchangable. UL listed
1500W-600V, 4KV pulse rated. Lamp included with fixture.
Electrical – Electrical components mounted to heavy-gauge plate to maximize heat
dissipation and structural integrity. Constant-wattage autotransformer ballasts
are copper wound and 100% factory tested. Super CWA PulseStart ballasts required
for 320M, 350M, 450M and 750M (must order SCWA option).
Installation – Extruded aluminium arm with
integral splice compartment. Standard arm
is 9" in length. (12" arm is required for fixtures mounted at 90o.)
Listings – UL Listed (standard). CSA Certified (see Options). UL listed for wet
locations.Optical chamber rated certified
for ingress protection per IEC529 international standards.

Example: KVF 1000M SYMDL 480 SP09 LPI

Designation

Distribution

Voltage

High Pressure
Sodium
KVF 250S
KVF 400S
KVF 1000S 1
Metal Halide
KVF 175M
KVF 250M
KVF 320M
KVF 350M
KVF 400M
KVF 450M
KVF 750M
KVF 1000M1

Vertical lamp distributions
SYMDL Symmetric square, drop
lens, semi-cutoff
ASYDL Asymmetric, drop lens,
semi-cutoff
SYMFL Symmetric square, flat lens,
full-cutoff
ASYFL Asymmetric, flat lens,
full-cutoff
VFADL Vertical forward throw
automotive,
drop lens, semi-cutoff
VFAFL Vertical forward throw
automotive, flat lens,
full-cutoff
Horizontal lamp distributions*
R2DL Type II roadway, drop lens
R3DL Type III asymmetric, drop
lens
R2FL Type II roadway flat lens
R3FL Type III asymmetric flat lens
R4FL Type IV forward throw flat
lens
Segmented reflectors*
SR2 Type II asymmetric
SR3 Type III asymmetric
SR4C Type IV forward throw,
sharp cutoff

120
2082
2402
277
347
480 2
TB 3

*Not available with 450M

Mounting4

Options/Accessories

Installed
Arm mounting
SF Single fuse, 120V, 277V, 347V (n/a TB)
SP04 4" square pole arm5
DF Double fuse, 208V, 240V, 480V (n/a TB)
RP04 4" round pole arm5
PER NEMA twist-lock receptacle only
SP06 6" square pole arm5
(no photocontrol)
RP06 6" round pole arm5
QRS Quartz restrike system (250W max., 120V
SP09 9" square pole arm5
lamp not included)
SP12 12" square pole arm
LPI Lamp included (standard)
RP09 9" round pole arm5
L/LP Less lamp
RP12 12" round pole arm
TLS Tool-less access
WW12 12" wood pole or wall
EC Emergency circuit
WB12 12" wall bracket
CR Enhanced corrosion resistance
KMA Mast arm (external fitter)
EHSB External house-side shield black6
Post-top mounting
SCWA Super CWA pulse start ballast (n/a with
PT4 Posttop, 4" OD open-top pole
any HPS)
PT45 Posttop, 41/ 2" OD open-top
EHS External house-side shield6
pole
(matches fixture finish)
PT5 Posttop, 5" OD open-top pole
E A Embossed accents
PT6 Posttop, 6" OD open-top pole
CSA CSA Certified
RPF20 Round pole fitter (23/8 OD
For optional architectural colors, see page 485.
tenon)
Shipped separately6
RPF25 Round pole fitter (27/8 OD
PE1 NEMA twist-lock PE (120V-240V)
tenon)
PE3 NEMA twist-lock PE (347V)
3
SPF20 Square pole fitter (2 /8 OD
PE4 NEMA twist-lock PE (480V)
tenon)
PE7 NEMA twist-lock PE (277V)
SPF25 Square pole fitter (27/8 OD
SC Shorting cap for PER option
tenon)
VG Vandal guard
KVFEHS External house-side shield (specify
color)
For tenon slipfitters, see page 486.

Dimensions are shown in inches (centimeters) unless otherwise noted.
Arm-mount
Post-top
EPA
2.8 ft2 (.25 m2)
2.8 ft2 (.25 m2)
1
Square
21 /2 (54.6)
211/2 (54.6)
Height
17 (43.2)
17 (43.2)
Overall depth
–
22.7 (57.7)
Max. weight
53 lbs (24 kg)
60 lbs (27.2 kg)

434

Outdoor / PSG8

www.lithonia.com
keyword: KVF

NOTES:
1 Must use BT37 lamp.
2 Consult factory for availability in Canada.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
4 For arm mounting, see technical data section in Outdoor
binder for drilling template.
5 Must order SP12 or RP12 when two or more luminaires are
oriented on a 90o drilling pattern.
6 May be ordered as accessories.

Area Lighting

Arm-Mounted Square Cutoff
Intended Use
For lighting shopping center or stadium
parking lots.
Features
Housing – Rugged, heavy-gauge, aluminum
housing. Square shape, continuously welded
seams for weather-tight integrity. EPDM
closed-cell housing gasket. Dark bronze
corrosion-resistant polyester powder finish
(DDB) standard: other arch colors available.
Lens – Impact-resistant flat glass is standardfor KVS1, R2, R3 & R4. Convex glass
lens is standard with all KVS3, KVS1 & R5.
Door Frame – Extruded aluminum hinged
door frame. All exposed hardware is stainless steel.
Mounting – Extruded 9" (KVS1) and 12"
(KVS3) arms with integral splice compartment for wall or pole mounting. Optional mounting available.

Ordering Information
Designation
High Pressure Sodium
KVS1
70S
KVS1
100S
KVS1
150S
KVS1
250S
KVS3
400S
KVS3
1000S
Metal Halide
KVS1
100M
KVS1
150M
KVS1
175M
KVS1
200M 1
KVS1
250M
KVS3
320M 1
KVS3
350M 1
KVS3
400M
KVS3
1000M2

KVS

Optics – One-piece, anodized, hydroformed
aluminum reflector. Four cutoff distributions available: R2 (Roadway), R3 (Asymmetric), R4 (Forward Throw) and R5 (Symmetric). Reflectors hinge out for easy removal during installation/maintenance. R5
is vertically lamped; R2, R3, and R4 are
horizontally lamped.
Electrical – 150W and below high reactance high power factor ballast. Constant-wattage autotransformer ballasts are
copper wound and 100% factory tested. Removable, unitized power module and positive-locking disconnect plugs.
Socket – Mogul-base porcelain socket
(100M & 150M are medium-base) with copper alloy, nickel-plated screw shell and
center contact. UL listed 1500W-600V. 4KV
pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations.

Example: KVS1 150S R2 120 SP09 PER
Distribution

Voltage

R2
R2
R2
R2
R2
—

R3
R3
R3
R3
R3
—

R4
R4
R4
R4
—
—

R5
R5
R5
R5
R5
R5

R2
R2
R2
R2
R2
R2
R2
R2
R2

R3
R3
R3
R3
R3
R3
R3
R3
R3

R4
R4
R4
R4
R4
—
—
—
—

R5
R5
R5
R5
R5
R5
R5
R5
R5

NOTES:
1 Must be ordered with SCWA.
2 Must use BT37reduced jacket lamp for 1000M, R2 & R3. R5
takes BT56 standard lamp.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
5 Single/twin, 180° configuration.
6 For use with 6" minimum 2-3/8" OD pipe.
7 PER must be ordered with fixture.
8 Includes mounting arm.

120
2083
2403
277
347
4803
TB 4

Mounting

Options/Accessories

KVS1 (Shipped separately)
SP09 Square pole arm
RP09 Round pole arm
WW09 Wood pole or wall
WB09 Wall bracket
KTMB Twin mounting bar (Directly
mounts to 27/8" OD tenon)

Installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system (100W max on
KVS1, 250W max on KVS2; lamp not
included) 4
CR Enhanced corrosion resistance
EC Emergency circuit
MED Medium base socket (size 1 only)
HS House-side shield (R3, R4, R5 only)
SCWA Super CWA pulse start ballast (n/a with
HPS or 100M) (1000M & 175M with
R5 only).
CSA CSA Certified
NOM NOM Certified (consult factory)

KVS3 (Shipped separately)
SP12 Square pole arm
RP12 Round pole arm
WW12 Wood pole
WB12 Wall bracket
MA Mast arm internal fitter5
OPTIONAL MOUNTING
KVS1 AND KVS3 (Shipped separately)
KMA Mast arm adapter
(KVS1 only)6
DA12P Degree arm (pole)5
DA12WB Degree arm (wall)5

For optional architectural colors, see page 485.

Shipped separately
PE1 NEMA twist-lock PE (120-240V)7
PE3 NEMA twist-lock PE (347V)7
PE4 NEMA twist-lock PE (480V)7
PE7 NEMA twist-lock PE (277V)7
SC Shorting cap for PER option
VG Vandal guard (n/a KVS3)

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA8
Square
Height
Max. weight

KVS1
1.8 ft2 (.17 m2)
163/4 (42.0)
101/2 (26.0)
33 lbs (15.0 kg)

KVS3
3.9 ft2 (.36 m2)
24 (61.0)
161/2 (42.0)
74 lbs (34.0 kg)

For tenon slipfitters, see page 486.

H

Arm
www.lithonia.com
keyword: KVS

L

Outdoor / PSG8

435

Area Lighting

Architectural Square Vertical

KVE

Intended Use
For streets, parking lots and surrounding
areas.
Features
Housing – Square-shaped, rugged, heavygauge, extruded aluminum housing. Fully
gasketed for weather-tight integrity. Standard finish is dark bronze (DDB) corrosionresistant polyester powder. Other architectural colors available.
Lens – Impact-resistant, clear, 3/16" thick,
tempered drop lens.
Mounting – Extruded aluminum arm with
integral splice compartment for wall or pole
mounting is shipped in fixture carton. Optional mountings available.
Optics – Segmented, anodized aluminum
optics are interchangeable and rotatable.
Vertically lamped sealed optics include

Ordering Information

Designation
High Pressure
Sodium
KVE2 250S
KVE2 400S
KVE3 1000S

Example: KVE2 250S SYM 120 RPV06 SF

Mounting 6

Distribution
Vertical lamp distributions:
SYM Symmetric, semi-cutoff2
SYMC Symmetric, full-cutoff (n/a 1000S)
ASY Asymmetric, semi-cutoff
ASYC Asymmetric, full-cutoff

Metal Halide
Horizontal lamp distributions:
KVE2 175M
R2 Type II roadway (n/a 1000S)3
1
KVE2 200M
R3 Type III asymmetric (n/a 1000S)3
KVE2 250M
R4SC Type IV forward throw, sharp
KVE2 320M 1,3
cutoff (n/a 1000S)3
KVE2 350M 1,3
R4W Type IV forward throw
(1000M only)3
KVE2 400M 3
R5S Type V symmetric square (1000M
KVE3 1000M
Voltage
120, 2084, 2404, 277,
347, 4804, TB5
NOTES:
1 Must be ordered with SCWA.
2 Meets IES cutoff criteria for 1000W high pressure sodium
luminaire.
3 320W, 350W, 400W MH requires ED28 lamp; 1000WMH
requires BT37 lamp. Not available with KVE3 1000S.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 For arm mounting, see technical data section in Outdoor
binder for drilling template.
7 For KVE2 luminaires, SPV12, RPV12, SPV14 or RPV14 must
be used when two or more luminaires oriented on a 90°
drilling pattern.
8 For KVE3 luminaires, SPV14 or RPV14 must be used when
two or more luminaires oriented on a 90° drilling pattern.

Included
SPV04
SPV06
SPV09
SPV12
SPV14
RPV04
RPV06
RPV09
RPV12
RPV14
WWV09
WBV09

Options/Accessories
Installed

4" square pole arm7,8
(standard)
6" square pole arm7,8
9" square pole arm7,8
12" square pole arm8
14" square pole arm
4" round pole arm7,8
6" square pole arm7,8
9" round pole arm7,8
12" square pole arm8
14" square pole arm
9" wood pole or wall
9" wall bracket

Shipped separately
PT4 Posttop, 4" OD opentop pole
PT45 Posttop, 41/2"
OD open-top pole
PT5 Posttop, 5" OD opentop pole
PT6 Posttop, 6" OD opentop pole
RPF20 Round pole fitter
(23/8 OD tenon)
RPF25 Round pole fitter
(27/8 OD tenon)
SPF20 Square pole fitter
(23/8 OD tenon)
SPF25 Square pole fitter
(27/8 OD tenon)

Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA
Square
Height
Max. weight

436

Outdoor / PSG8

symmetric, symmetric cutoff, asymmetric
and asymmetric cutoff. Design redirects
light around arc-tube for optimum lamp life
and maximum efficiency. Five horizontal
lamp cutoff distributions available: R2
(Roadway), R3 (Asymmetric), R4SC (Forward Throw, Sharp Cutoff, R4W (Wide,
Forward Throw) and R5S (Symmetric).
Electrical – Constant-wattage autotransformer, high-power factor ballast. Ballast
is copper wound and 100% factory tested.
Removable power tray and positive locking disconnect plug.
Socket – Mogul-base porcelain socket
with copper alloy, nickel-plated screw shell
and center contact. UL listed 1500W, 600V.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL
listed for wet locations. US patent no.
D417,026.

KVE2 (arm)
3.3 ft2 (.31 m2)
25 (63.5)
163/4 (42.5)
77 lbs (34.9 kg)

KVE2 (post)
3.4 ft2 (.32 m2)
25 (63.5)
237/8 (60.6)
87 lbs (39.5 kg)

KVE3 (arm)
4.2 ft2 (.39 m2)
29 (73.7)
181/2 (47.0)
87 lbs (39.5 kg)

www.lithonia.com
keyword: KVE

KVE3 (post)
4.5 ft2 (.42 m2)
29 (73.7)
181/2 (47.0)
97 lbs (44.0 kg)

SF Single fuse, 120V, 277V, 347V (n/a TB)
DF Double fuse, 208V, 240V, 480V
(n/a TB)
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system (250W max.,
120V only, lamp not included)
CR Enhanced corrosion resistance
EC Emergency circuit
HS House-side shield (ASY, ASYC only.
R2, R3 shipped separately)
SCWA Super CWA pulse start ballast (n/a
with any HPS or 175M or 1000M
horizontal)
LS Lamp support (size 3 horizontal
optics only)
CSA CSA Certified
NOM NOM Certified (consult factory)
For optional architectural colors, see page 485.

Shipped separately
PE1
PE3
PE4
PE7
SC

NEMA twist-lock PE (120-240V)
NEMA twist-lock PE (347V)
NEMA twist-lock PE (480V)
NEMA twist-lock PE (277V)
Shorting cap for PER option

Architectural Round Vertical
Intended Use
For streets, parking lots and surrounding
areas.
Features
Housing – Cylindrically shaped, rugged,
heavy-gauge, spun aluminum housing.
Fully gasketed for weathertight integrity.
Standard finish is dark bronze (DDB) polyester powder. Other architectural colors
available.
Lens – Impact-resistant, clear, 3/16" thick,
tempered drop lens.
Mounting – Extruded-aluminum arm with
integral splice compartment for wall or pole
mounting is shipped in fixture carton. Optional mountings available.
Optics – Segmented, anodized aluminum
optics are interchangeable and rotatable.
Vertically lamped sealed optics include

KVR

symmetric, symmetric cutoff, asymmetric
and asymmetric cutoff. Design redirects
light around arc-tube for optimum lamp life
and maximum efficiency. Five horizontal
lamp cutoff distributions available: R2
(Roadway), R3 (Asymmetric), R4SC (Forward
Throw, Sharp Cutoff), R4W (Wide, Forward
Throw) and R5S (Symmetric).
Electrical – Constant-wattage autotransformer, high-power factor ballast. Ballast
is copper wound and 100% factory tested.
Removable power tray and positive locking disconnect plug.
Socket – Mogul-base porcelain socket
with copper alloy, nickel-plated screw shell
and center contact. UL listed 1500W, 600V.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed for wet
locations.

Ordering Information

Designation

Area Lighting

Example: KVR2 250S SYM 120 RPVD06 SF

Mounting 6

Distribution
Included
SPVD04

High Pres.
Sodium
KVR2 250S
KVR2 400S
KVR3 1000S

Vertical
SYM
SYMC
ASY
ASYC

lamp distributions
Symmetric, semi-cutoff2
Symmetric, full-cutoff (n/a 1000S)
Asymmetric, semi-cutoff
Asymmetric, full-cutoff

Metal Halide
KVR2 175M
KVR2 200M 1
KVR2 250M
KVR2 320M 1
KVR2 350M 1
KVR2 400M
KVR3 1000M

Horizontal lamp distributions
R2 Type II roadway (n/a 1000S)3
R3 Type III asymmetric (n/a 1000S)3
R4SC Type IV forward throw, sharp cutoff (n/a
1000S)
R4W Type IV forward throw (1000M only)3
R5S Type V symmetric square (1000M only)3
Voltage
120, 2084, 2404, 277,
347, 4804, TB5

NOTES:
1 Must be ordered with SCWA.
2 Meets IES cutoff criteria for 1000W high pressure sodium
luminaire.
3 400W and 1000W metal halide require reduced jacket lamp.
Not available with KVR3 1000S.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V; 120V,
277V, 347V in Canada).
6 For arm mounting, refer to technical data section in Outdoor binder for drilling template.
7 For KVR2 luminaires, SPVD06, RPVD06, SPVD09, RPVD09,
SPVD12 or RPVD12 must be used when two or more
luminaires oriented on 90° drilling pattern.
8 For 1000W luminaires, SPVD09, RPVD09, SPVD12 or RPVD12
must be used when two or more luminaires oriented on 90°
drilling pattern.
9 For use with round poles only.

SPVD06
SPVD09
SPVD12
SPVD14
RPVD04
RPVD06
RPVD09
RPVD12
RPVD14
WWVD09
WBVD09

4" square pole arm7,8
(std.)
6" square pole arm8
9" square pole arm
12" square pole arm
14" square pole arm
4" round pole arm7,8
6" square pole arm8
9" round pole arm
12" square pole arm
14" square pole arm
9" wood pole or wall
9" wall bracket

Shipped separately
PT4 Posttop, 4" OD opentop pole9
PT45 Posttop, 41/2"
OD open-top pole9
PT5 Posttop, 5" OD opentop pole9
PT6 Posttop, 6" OD opentop pole9
RPF20 Round pole fitter (23/8
OD tenon)
RPF25 Round pole fitter (27/8
OD tenon)

Options/Accessories
Installed
SF Single fuse, 120V, 277V, 347V
(n/a TB)
DF Double fuse, 208V, 240V, 480V
(n/a TB)
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system (250W
max., 120V only, lamp not included)
GFL Glass flat lens (n/a HPS)
CR Corrosion-resistant finish
EC Emergency circuit
LS Lamp support (size 3 horizontal
optics only)
HS House-side shield (ASY, ASYC
only. R2, R3 shipped separately)
SCWA Super CWA pulse start ballast (n/
a with HPS or 175M or 1000M horizontal)
CSA CSA Certified
For optional architectural colors, see page 485.

Shipped separately
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
For tenon slipfitters, see page 486.

Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA
Diameter
Height
Max. weight

KVR2 (arm)
1.5 ft2 (.14 m2)
25 (63.5)
163/4 (42.5)
65 lbs. (29.5 kg)

KVR2 (post)
1.6 ft2 (.15 m2)
25 (63.5)
237/8 (60.6)
75 lbs (34.0 kg)

KVR3 (arm)
2.0 ft2 (.19 m2)
29 (73.7)
181/2 (47.0)
70 lbs (31.8 kg)

www.lithonia.com
keyword: KVR

KVR3 (post)
2.2 ft2 (.20 m2)
29 (73.7)
181/2 (47.0)
80 lbs. (36.3 kg)

Outdoor / PSG8

437

Area Lighting

Arm-Mounted Centriform Cutoff

KAR

Intended Use
For parking lots, plazas or entrances.
Features
Housing – Rugged, heavy-gauge, spunaluminum housing in centriform shape.
Dark bronze polyester corrosion-resistant
powder finish (DDB) standard; other architectural colors available.
Door Frame – Aluminum door frame with
1
/8" impact-resistant, tempered-glass lens.
Stainless steel external hardware. Onepiece EPT closed-cell gasket.
Mounting – Contoured, extruded-aluminum
9" (KAR1/ KAR2) and 12" (KAR3) arms with
integral splice compartment for pole or wall
mounting. Optional mountings available.
Optics – Anodized, hydroformed aluminum reflectors. Four cutoff distributions
available: R2 (Roadway), R3 (Asymmet-

Ordering Information

Example: KAR3 1000S R4 120 RPD12 QRS

Distribution

Voltage

Type II roadway (n/a
1000S)
R3 Type III asymmetric
R4 Type IV forward
throw, (n/a size 1)
R5S Type V symmetric
square (n/a size 1)

120
2082
2402
277
347
4802
TB 3

Designation
High Pressure Sodium
KAR1 150S
KAR2 250S
KAR2 400S
KAR3 1000S
Metal Halide
KAR1 100M
KAR1 150M
KAR1 175M
KAR1 200M1
KAR1 250M
KAR2 320M1
KAR2 350M1
KAR2 400M
KAR3 1000M

R2

Mounting

Options/Accessories

KAR1/KAR2, shipped separately
SPD09 9" square pole arm
RPD09 9" round pole arm
WWD09 9" wood pole or wall
WBD09 9" wall bracket
KAR3, shipped separately
SPD12 12" square pole arm
RPD12 12" round pole arm
WWD12 12" wood pole or wall
WBD12 12" wall bracket
Shipped separately
KMA Mast arm adapter
KTMB Twin mounting bar
DAD12P Degree arm (pole)
DAD12WB Degree arm (wall)

Dimensions are shown in inches (centimeters) unless otherwise
noted.
EPA5
Diameter
Width
Height
Arm length
Max. weight

KAR1
1.2 ft2 (.11 m2)
191/2 (49.5)
163/16 (41.1)
71/4 (18.4)
9 (22.9)
36 lbs (15.0 kg)

KAR2
1.5 ft2 (.14 m2)
211/2 (54.6)
181/2 (47.0)
85/16 (21.1)
9 (22.9)
45 lbs (20.0 kg)

KAR3
2.2 ft2 (.20 m2)
30 (75.6)
245/16 (61.8)
101/2 (26.7)
12 (30.5)
53 lbs (24.0 kg)

Arm

Outdoor / PSG8

Installed
SF Single fuse, 120V, 277V, 347V (n/a TB)
DF Double fuse, 208V, 240V, 480V (n/a TB)
PER NEMA twist-lock receptacle only (no
photocontrol)
QRS Quartz restrike system (250W max, 120V
lamp not included)
CR Enhanced corrosion resistance
EC Emergency circuit
HS House-side shield (R3, R4 only)
SCWA Super CWA pulse start ballast (n/a with
HPS, 100M, 175M or 1000M)
CSA CSA Certified
For optional architectural colors, see page 485.

Shipped
PE1
PE3
PE4
PE7
SC
VG

separately
NEMA twist-lock PE (120V-240V)4
NEMA twist-lock PE (347V)4
NEMA twist-lock PE (480V)4
NEMA twist-lock PE (277V)4
Shorting cap for PER option
Vandal guard (KAR1/2 below 400W )
For tenon slipfitters, see page 486.

D

438

ric), R4 (Forward Throw) and R5S (Symmetric). R4 reflector is field-rotatable.
Reflectors hinge out for easy installation
and maintenance.
Electrical – 150S, 100-150M high
reactance, high-power factor ballast.
Constant-wattage autotransformer ballast,
copper wound and 100% factory tested.
Removable power door and positive-locking disconnect plugs.
Socket – Horizontally oriented mogulbase porcelain socket (100M & 150M are
medium-base) with copper alloy, nickelplated screw shell and center contact.
UL listed 1500W-600V. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified
(see Options). UL listed for wet locations.

Diameter
www.lithonia.com
keyword: KAR

NOTES:
1 Must be ordered with SCWA.
2 Consult factory for availability in Canada.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
4 PER must be ordered with fixture.
5 Includes mounting arm.

Area Lighting

Centriform Post-Top Cutoff
Intended Use
For walkways, plazas or pedestrian areas.
Features
Housing – Rugged, heavy-gauge, spunaluminum housing. EPDM one-piece,
closed-cell gasket. Dark bronze corrosion-resistant polyester powder finish
(DDB) standard; other architectural colors available.
Enclosure – Thermoformed, clear acrylic,
0.125" minimum wall thickness. Lens gaskets are EPDM one-piece closed-cell.
Mounting – Internal expansion sleeve
pole-fitter with integral splice compartment. Clean transition to pole via 1/4" transition plate. No external hardware. Mounts
to 41/2" round, open-top pole. Other sizes
require tenon and tenon slipfitter.
Optics – One-piece, hydroformed, anod-

KKR

ized-aluminum reflectors. Four cutoff distributions available: R3 (Asymmetric), R4
(Forward Throw), R5 (Symmetric, vertical)
and R5S (Square). Field-interchangeable
reflectors hinge out for easy maintenance.
Electrical – 70-150S high reactance, highpower factor ballast. Constant-watttage
autotransformer ballasts (-40°F starting),
copper wound and 100% factory tested.
Removable, unitized power module. Positive-locking disconnect plugs (primary and
secondary).
Socket – Horizontally oriented, mogul-base
porcelain socket with copper alloy, nickelplated screw shell and center contact. UL
listed 1500W-600V. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified
(see Options). UL listed for wet locations.

Ordering Information

Example: KKR 175M R5S 120 QRS

Designation

Distribution

Voltage

High Pressure Sodium
KKR 70S
KKR 100S
KKR 150S
KKR 250S
KKR 400S

R3
R42
R52
R5S

120
2083
2403
277
347
4803
TB4

Metal Halide
KKR 150M
KKR 175M
KKR 200M 1
KKR 250M
KKR 320M 1
KKR 350M 1
KKR 400M

Optional mounting5
Shipped separately
SM Side-mounting
assembly (one per
luminaire)
WM Wall-mounting
assembly
T20 Tenon slipfitter (for 2"
pipe tenon, 23/8" OD)
T25 Tenon slipfiter (for 21/2"
pipe tenon, 27/8" OD)
Mounts to any 41/2" round open-top pole.
Other pole sizes require tenon and tenon
slipfitter.

Options/Accessories
Installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
PER NEMA twist-lock receptacle only (no
photocontrol)
QRS Quartz restrike system (250W max, 120V
lamp not included).
CR Enhanced corrosion resistance
EC Emergency circuit
PC Polycarbonate lens
LS Lamp support
HS House-side shield (R3 and R4 only)
SCWA Super CWA pulse start ballast (n/a with
HPS or 175M).
CSA CSA Certified
For optional architectural colors, see page 485.

Shipped
PE1
PE3
PE4
PE7
SC

separately
NEMA twist-lock PE (120V-240V)6
NEMA twist-lock PE (347V)6
NEMA twist-lock PE (480V)6
NEMA twist-lock PE (277V)6
Shorting cap for PER option

For tenon slipfitters, see page 486.

NOTES:
1 Must be ordered with SCWA.
2 KKR 400M R4 and R5 require ED28 reduced jacket lamp.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
5 When ordering separately, order as KKR SM, KKR WM,
KKR T20, or KKR T25.
6 PER option must be ordered with fixture.

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA
Diameter
Housing height
Overall height
Max. weight

KKR
1.6 ft2 (.15 m2)
221/4 (56.5)
11 (27.9)
201/2 (52.1)
45 lbs (20.0 kg)

www.lithonia.com
keyword: KKR

Outdoor / PSG8

439

Area Lighting

Square Post-Top Cutoff

KKS

Intended Use
For walkways, plazas or pedestrian areas.
Features
Housing – Rugged, heavy-gauge, formedaluminum housing. EPDM one-piece,
closed-cell gasket. Dark bronze corrosion-resistant polyester powder finish
(DDB) standard; other architectural colors available.
Door Frame – Permanent-mold, cast-aluminum door frame with positive hold-open
device. Stainless steel external hardware.
Enclosure – Thermoformed clear acrylic,
0.125" minimum wall thickness. Lens gaskets are EPDM one-piece closed-cell.
Mounting – Internal expansion sleeve
pole-fitter with integral splice compartment. Clean transition to pole via 1/4" transition plate. No external hardware. Mounts
to 4" square, open-top pole. Other pole
sizes require tenon and tenon slipfitter.

Optics – One-piece, hydroformed, anodized-aluminum reflectors. Four cutoff distributions available: R3 (Asymmetric), R4
(Forward Throw), R5 (Symmetric, vertical)
and R5S (Square). Field-interchangeable
reflectors hinge out for easy maintenance.
Electrical – 70-150S high reactance, highpower factor ballast. Constant-wattage autotransformer ballasts are copper wound
and 100% factory tested. Removable, unitized power door and positive-locking disconnect plugs (primary and secondary).
Socket – Mogul-base porcelain socket
with copper alloy, nickel-plated screw shell
and center contact. UL listed 1500W-600V.
4KV pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations.

Ordering Information

Example: KKS 70S R3 120 QRS

Designation

Distribution

Voltage

Optional mounting5

Options/Accessories

High Pressure Sodium
KKS 70S
KKS 100S
KKS 150S
KKS 250S
KKS 400S

R3
R42
R52
R5S

120
2083
2403
277
347
4803
TB4

Shipped separately
SM Side-mounting
assembly (one per
luminaire)
WM Wall-mounting
assembly
T20 Tenon slipfitter (for 2"
pipe tenon, 23/8" OD)

Installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
PER NEMA twist-lock receptacle only
(no photocontrol)
QRS Quartz restrike system (250W max, 120V
lamp not included).
CR Enhanced corrosion resistance
EC Emergency circuit
PC Polycarbonate lens
HS House-side shield (R3 and R4 only)
SCWA Super CWA pulse start ballast
(n/a with HPS or 175M).
CSA CSA Certified
NOM NOM Certified (consult factory)

Metal Halide
KKS 150M
KKS 175M
KKS 200M 1
KKS 250M
KKS 320M 1
KKS 350M 1
KKS 400M

Mounts to any 4" square open-top
pole. Other pole sizes require tenon
and tenon slipfitter.

For optional architectural colors, see page 485.

Shipped
PE1
PE3
PE4
PE7
SC

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA
Square
Housing height
Overall height
Max. weight

KKS
2.5 ft2 (.23 m2)
201/4 (51.4)
113/4 (29.9)
203/4 (52.7)
54lbs (24.4kg)

For tenon slipfitters, see page 486.

NOTES:
1 Must be ordered with SCWA.
2 KKS 400M R4 or R5 requires ED28 reduced jacket lamp.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
5 When ordering separately, order as KKS SM, KKS WM or
KKS T20.
6 PER option must be ordered with fixture.

440

Outdoor / PSG8

separately
NEMA twist-lock PE (120V-240V)6
NEMA twist-lock PE (347V)6
NEMA twist-lock PE (480V)6
NEMA twist-lock PE (277V)6
Shorting cap for PER option

www.lithonia.com
keyword: KKS

Area Lighting

Square Post-Top Cutoff
Intended Use
For parking areas, new construction or
retrofit.
Features
Housing – Rugged, heavy-gauge, aluminum housing in symmetric square shape.
Continuously welded seams for weathertight integrity. Recessed, combinationhead 13/4" turn fastener. Positive-locking
device retains housing open during servicing. Dark bronze corrosion-resistant
polyester powder finish (DDB) standard;
other architectural colors available.
Lens frame – Die-cast aluminum lens frame.
Butyl rubber gasket and EPT closed-cell
foam gasket prevent entry of outside contaminants. Brushed-aluminum legs factory-installed into lens frame.
Lens – Impact-resistant tempered flat glass.
Drop lens standard on 1000M.
Mounting – Slipfitter pole-top mounting for

KQS

23/8" OD x 5" high tenon. Mounting hardware
packaged separately.
Optics – One-piece, hydroformed aluminum,
multifaceted, anodized aluminum reflectors.
Two cutoff distributions available: R3 (Asymmetric) and R5S (Square). Field-interchangeable reflectors hinge out for servicing.
Electrical – 150S high-reactance, high
power factor ballast. Constant-wattage
autotransformer, copper wound and
100% factory-tested. All electrical components are unitized on power module
for ease of installation and maintenance.
Positive-locking disconnect plugs (primary and secondary).
Socket – Horizontally oriented, mogul-base
porcelain socket with copper alloy, nickelplated screw shell and center contact. UL
listed 1500W-600V, 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for wet locations.

Ordering Information

Example: KQS 250S R3 120 SPF QRS

Designation

Distribution

Voltage

High Pressure Sodium
KQS 150S
KQS 250S
KQS 400S
KQS 1000S 1

R3
R5S

120
2084
2404
277
347
4804
TB 5

Metal Halide
KQS 175M
KQS 200M 2
KQS 250M
KQS 320M 2
KQS 350M 2
KQS 400M
KQS 1000M 3

Options/Accessories

Mounting
Shipped separately
SPF Square pole fitter
(standard) for 23/8"OD x 5"
tenon
RPF Round pole fitter
23/8"OD x 5" tenon

Installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
PER NEMA twist-lock receptacle
only (no photocontrol)
QRS Quartz restrike system (500W
max, 120V lamp not included)
CR Enhanced corrosion resistance
EC Emergency circuit
LS Lamp support (1000W only)
HS House-side shield (R3 only)
SCWA Super CWA pulse start ballast
(n/a with HPS, 175M or 1000M)
CSA CSA Certified
NOM NOM Certified (consult factory)
For optional architectural colors, see page 485.

Shipped
PE1
PE3
PE4
PE7
SC
VG

NOTES:
1 Not available with R3 distribution.
2 Must be ordered with SCWA.
3 KQS 1000M requires BT37 reduced jacket lamp.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 PER option must be ordered with fixture.

separately
NEMA twist-lock PE (120V-240V)6
NEMA twist-lock PE (347V)6
NEMA twist-lock PE (480V)6
NEMA twist-lock PE (277V)6
Shorting cap for PER option
Vandal guard (400W max.)

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA
Square
Housing height
Overall height
Max. weight

KQS
2.2 ft2 (.21 m2)
24 (70.0)
91/2 (24.1)
271/2 (69.9)
67 lbs (30.0 kg)

www.lithonia.com
keyword: KQS

Outdoor / PSG8

441

Security Lighting

Dusk-to-Dawn Area Lighters

TDD

Intended Use
For lighting yards and parking lots, service
roads and building perimeters.
Features
Housing – Rugged, die-cast, aluminum
head with standard NEMA photocell receptacle.
Optics – Formed aluminum reflectors and
open bottom refractor for ease of maintenance and lamp replacement. Prismatic
refractor provides uniform symmetrical
Type V distribution, mogul based socket.

Ordering Information

Example: TDD 175MV 120 PER LPI

Installation – Mounting arm and all mounting hardware is included in carton. Photocell and lamp are included in carton. (24"
mounting arm)
Listings – UL Listed to US and Canadian
safety standards. UL/C-UL listed for wet
locations (25°C ambient temperature).

Accessories

(Order separately)

PE1 Replacement photocell
RK1 TDDLENS Replacement lens

Designation
High Pressure Sodium
TDD 100S
TDD 150S
Mercury Vapor
TDD 175MV

Voltage
120

TDB

Lamp

Photocell
PER Photocell receptacle
and NEMA twist-lock
photocell included as
standard

LPI

Lamp
included as
standard

Intended Use
For lighting yards and parking lots, service
roads and building perimeters.

NEW

Features
Housing – Rugged, die-cast, aluminum
head with standard NEMA photocell receptacle.
Optics – Formed aluminum reflectors and
open-bottom refractor for easy maintenance and lamp replacement. Optical assembly attaches via two tool-less toggle
latches. Prismatic acrylic refractor provides

Ordering Information

Example: TDB 175MV 120 PKG

Dimensions are shown in inches (centimeters) unless
otherwise noted.

EPA
Height
Width
Depth
Max weight

TDD
0.8 ft2 (0.07m2)
17 (43.18)
12(30.48)
12(30.48)
12 lbs (5.44 kg)

uniform symmetrical Type V distribution.
(glass for 250MV).
Installation – Squared 1¼" (OD) Mounting
arm and all mounting hardware is included
in carton. Photocell and lamp are included
in carton. (24" mounting arm)
Listings – Standard Product is NOT listed
by UL, CSA, or NOM.

Accessories

(Order separately)

RK1 TDDLENS A1250B

Designation
High Pressure Sodium
TDB 50S
70S
100S
150S
Mercury Vapor
TDB 100MV
175MV
250MV

442

Outdoor / PSG8

Voltage

Options/Accessories

120

Shipped installed in fixture
PKG
Fixture, mounting arm, hardware,
lamp and photoeye included in
one box (standard)
L/PKG
Fixture, optical and receptacle
only in box

www.lithonia.com
keyword: TD

Replacement lens

Dimensions are shown in inches (centimeters) unless
otherwise noted.

EPA
Height
Width
Depth
Max weight

TDB
0.8 ft2 (0.07m2)
15 1/2 (39.4)
12(30.48)
12(30.48)
15 lbs (6.8 kg)

Dusk-to-Dawn Area Lighters
Intended Use
For lighting yards and parking lots, service
roads and building perimeters.
Features
Housing – Rugged, die-cast, aluminum
head with standard NEMA photocell receptacle.
Optics – Fluted aluminum reflectors and
open bottom refractor for ease of maintenance and lamp replacement. Prismatic
acrylic refractor provides uniform symmet-

Ordering Information

Security Lighting

TDL

rical Type V distribution. (Glass for 250MV).
Installation – 1¼" (OD) Mounting arm and
all mounting hardware is included in carton. Photocell and lamp are included in
carton. (18"-24" mounting arm depending
on wattage).
Listings – 150S and below and 175 and below are UL listed for wet locations. For CSA
or NOM requirements, consult factory.

NEW

Example: TDL 175MV 120 PKG
Dimensions are shown in inches (centimeters) unless
otherwise noted.

Designation
High Pressure Sodium
TDL
70S
100S
150S
Mercury Vapor
TDL 175MV
250MV

Voltage

Options

120

Shipped installed in fixture
PKG Fixture, mounting arm, hardware, lamp
and photoeye included in one box
(standard)
L/PKG Fixture, optical and receptacle only in
box

Intended Use
For lighting yards and parking lots, service
roads and building perimeters.
Features

EPA
Height
Width
Depth
Max weight

TDL
0.8ft2 (0.07m2)
151/2 (39.4)
12(30.48)
12(30.48)
18 lbs (8.16 kg)

TDC

Installation – 1¼" (OD) Mounting arm and
all mounting hardware is included in carton. Photocell and lamp are included in
carton. (18" mounting arm)
Listings – Standard product is NOT listed
by UL, CSA, or NOM.

NEW

Housing – Rugged, die-cast, aluminum
head with standard NEMA photocell receptacle.
Optics – Spun anodized aluminum reflector delivers IES type V full-cutoff distributions. Open bottom housing provides easy
maintenance and lamp replacement.

Ordering Information

Example: TDC 175MV 120 PKG
Dimensions are shown in inches (centimeters) unless
otherwise noted.

Designation
High Pressure Sodium
TDC
70S
100S
150S
Mercury Vapor
TDC 175MV
250MV

Voltage

Options

120

Shipped installed in fixture
PKG Fixture, mounting arm, hardware,
lamp and photoeye included in one
box (standard)
L/PKG Fixture, optical and receptacle only in
box

www.lithonia.com
keyword: TD

EPA
Height
Width
Depth
Max weight

TDC
1.2ft2 (0.11m2)
17 (43.18)
12(30.48)
12(30.48)
12 lbs (5.44 kg)

Outdoor / PSG8

443

Roadway Lighting

Small Roadway Lighting

CHE

Intended Use
Ideal for roadways, residential streets,
storage areas, parking lots, campuses and
parks.
Features
Construction – Stainless steel latch permits easy opening with one hand for
relamping and servicing. Large surface
area "breathing-seal" polyester gasketing
protects reflector and lens from contaminants; maintains maximum optical efficiency. Available with or without twistlock photocontrol receptacle. Integral
wildlife shield.
Finish – Gray polyester powder paint finish is electrostatically applied for superior corrosion resistance.
Optical System – Ovate refractors in a variety of materials or flat tempered glass
full cutoff lens provides a choice of effi-

NEW

Ordering Information

Series
CHE

Wattage
High Pressure Sodium
35S1
50S
70S
100S
150S

cient light distributions for every application. Optics are computer designed for
maximum performance.
Electrical System – Reactor, normal power
factor ballast standard. High power factor
available (see Options). Two or three-position (L1, L2, N) tunnel type compression terminal block standard.
Installation – Two-bolt mast arm mount.
Arm is compatible with 1.25" - 2.0" (3.2cm 5.1cm) mast arm.
Listings – IP32 rated housing and IP54
rated optical assembly is standard. IP65
rating is available for optical assembly,
see options. Standard product is NOT
listed by UL, CSA or NOM. For specific listing requirements, consult factory.

Example: CHE 100S R2 DLG 120 PER LPI

NEMA distribution
R2
R3

Lens
DLG

DLA
DLP
FL

Drop lens
glass
(standard)

Voltage
(blank)
L/E

Drop lens
acrylic
Drop lens
polycarbonate

120
L/E 2

Ballast options
(blank) Reactor normal
power factor
ballast
(standard)
RHP Reactor high
power factor
ballast

Flat tempered
glass lens, full
cutoff

Options
Installed
LPI
PER

PE1
IP65

Lamp included
NEMA twist-lock
receptacle only
(photocontrol
not included)
NEMA twist-lock
PE (120V)
IP65 rating for
optics

Shipped separately3
SC

NOTES:
1 Not available with RHP.
2 Shipped without ballast/electrical components.
3 May be ordered as an accessory.

444

Outdoor / PSG8

www.lithonia.com
keyword: CH

Shorting cap for
PER option

Dimensions are shown in inches (centimeters) and
pounds (kilograms) unless otherwise noted.
Flat lens EPA
Drop lens EPA
Length
Width
Flat lens depth
Drop lens depth
Weight

CHE
.61 ft2 (.057 m2)
.77 ft2 (.072 m2)
21 (53.3)
127/8 (32.7)
67/8 (12.5)
101/2 (26.7)
12 (5.4)

Low-Wattage Roadway Lighting

Roadway Lighting

is electrostatically applied for superior
corrosion resistance.
Optical System – Ovate refractors or full
cutoff flat lens styles provide a choice of
efficient light distributions for every application. Optics are computer designed
for maximum performance. One-piece
screw shell socket provides positive retention of lamp under vibration.
Electrical System – Lag, high power factor (HPS) or constant wattage autotransformer (MH and MV) standard. Two- or
three-position (L1, L2, N) tunnel type compression terminal block standard.
Installation – Two-bolt mast arm mount
with integral stepped leveling system provides secure mounting and easy leveling.
Listings – IP64 rated optical assembly.
IP65 rating available; see Options. Standard product is NOT listed by UL, CSA or
NOM. For specific listing requirements,
consult factory.

CHL
CHLD

Intended Use
Ideal for roadways, residential streets, storage areas, parking lots, shopping centers,
apartments and condominium complexes,
campuses and parks.
Features
Construction – Die-cast trigger latch on
lower housing permits easy one-hand
opening for relamping and servicing.
Large surface area "breathing-seal" polyester gasketing protects reflector and
lens from contaminants; maintains maximum optical efficiency. Die-cast low copper aluminum alloy for light weight,
strength and reliable service. Available
with or without twist-lock, photocontrol
receptacle. CHLD units: all major electrical components mounted on removable
power door for easy field servicing and
maintenance.
Finish – Gray polyester powder paint finish

Ordering Information

Series
CHL
CHLD

Wattage

Example: CHL 150S R2 DLG 120 LP1 PER

NEMA distribution

Lens

Voltage

R2
R3

DLG Drop lens glass
(standard)

120
208
240
277
480
TB 2
TB1 2
TB2 2
TB3 2
120/2403
240/4804
L/E5

Metal Halide
175M
250M

DLA Drop lens
acrylic

Mercury Vapor
175MV
250MV

DLP Drop lens
polycarbonate

High Pressure Sodium
50S
70S
100S
150S
250S

NOTES:
1 HPS only, 150W max. with R3.
2 Optional multi-tap ballast (120V, 208V, 240V, 277V). TB
prewired to 277V. Others are: TB1 = 120V, TB2 = 208V,
TB3 = 240V.
3 MV only, prewired to 120V.
4 MV only, prewired to 240V.
5 Shipped without ballast/electrical components.
6 HPS only, 150W max.
7 Available in 120V and 240V only.
8 120V, 277V only. Not available with TB.
9 208V, 240V and 480V only. Not available with TB.
10 May be ordered as an accessory.

FL Flat tempered
glass lens, full
cutoff 1
FLX Flat tempered
glass lens, highperformance
full cutoff1

CHL
.74 ft2 (.07 m2)
.90 ft2 (.08 m2)
61/2 (16.5)
101/8 (25.7)
27 (66.6)
13 (33.0)
29 (13.2)

CHLD
.74 ft2 (.07 m2)
.90 ft2 (.08 m2)
61/2 (16.5)
101/8 (25.7)
27 (66.6)
13 (33.0)
33 (15.0)

Ballast options
(blank) Standard
ballast (see
Features)
RNP Reactor
normal power
factor ballast6
RHP Reactor high
power factor
ballast
50HZ 50 Hertz
(consult
factory)

Options
Installed
LPI
PER

PE1
PE4
PE7
CF
IP65
LSA1
LSA2
SF
SF10
SF15
SF20
DF
DF10
DF15
DF20
DDB
DBL

CHL

Dimensions do not include mounting arm. Dimensions are shown in inches (centimeters) and pounds
(kilograms) unless otherwise noted.
Flat Lens EPA
Drop Lens EPA
Flat Lens Depth
Drop Lens Depth
Length
Width
Weight

NEW

Lamp included
NEMA twist-lock
receptacle only
(photocontrol not
included)
NEMA twist-lock PE
(120V, 208V, 240V)
NEMA twist-lock PE
(480V)
NEMA twist-lock PE
(277V)
Charcoal filter,
silicone lens gasket
IP65 rating for optics
Single lighting surge
arrestor 7
Dual lighting surge
arrestor 7
Single 5 amp fuse8
Single 10 amp fuse8
Single 15 amp fuse8
Single 20 amp fuse8
Double 5 amp fuse9
Double 10 amp fuse9
Double 15 amp fuse9
Double 20 amp fuse9
Dark bronze finish
Black finish

Shipped separately10

CHLD

SC

www.lithonia.com
keyword: CH

Shorting cap for PER
option.

Outdoor / PSG8

445

Roadway Lighting

Medium-Wattage Roadway Lighting

CHM
CHMD

Intended Use
Ideal for roadways, residential streets,
storage areas, parking lots, shopping centers, apartments and condominium complexes, campuses and parks.
Features
Construction – Die-cast trigger latch on
lower housing for easy one-hand opening for relamping and servicing. Large
surface area "breathing-seal" polyester
gasketing protects reflector and lens
from contaminants; maintains maximum
optical efficiency. Die-cast low copper
aluminum alloy for light weight, strength
and reliable service. CHMD units: all major electrical components mounted on removable power door for easy field servicing and maintenance.
Finish – Gray polyester powder paint finish
is electrostatically applied for superior corrosion resistance.

NEW

Ordering Information

Series
CHM
CHMD

Wattage
Metal Halide
175M
250M1
320M2
350M2
400M1
Mercury Vapor
175MV
250MV
400MV
High Pressure
Sodium
200S
250S
310S
400S

CHM

Example: CHM 400S R2 DLG 120 LPI PER

Lens

NEMA distribution
R2
R3

DLG

Drop lens glass
(standard)

DLP

Drop lens
polycarbonate

FL

FLX

DLX

Flat tempered
glass lens, full
cutoff3
Flat tempered
glass lens, highperformance full
cutoff3
Drop clear lens,
high-performance cutoff

Voltage

Ballast options

120
208
240
277
480
TB 4
TB14
TB24
TB34
120/2405
240/4806
L/E7

(blank) Standard
ballast (see
Features)
SCWA Super CWA
pulse start

446

RNP Reactor normal
power factor
ballast4
RHP Reactor high
power factor
ballast4

LPI
LPIC
PER

PE1
PE4
PE7
CF

NOTES:
1 May be ordered with SCWA.
2 Must be ordered with SCWA.
3 HPS only.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V).
TB prewired to 277V. Others are: TB1 = 120V, TB2 = 208V,
TB3 = 240V.
5 MV only, prewired to 120V.
6 MV only, prewired to 240V.
7 Shipped without ballast/electrical components.
8 Available in 120V and 240V only.
9 120V and 277V only.
10 208V, 240V and 480V only.
11 May be ordered as an accessory.

Flat Lens EPA
Drop Lens EPA
Flat Lens Depth
Drop Lens Depth
Length
Width
Weight

Outdoor / PSG8

Options
Installed

50HZ 50 Hertz
(consult
factory)

Dimensions do not include mounting arm. Dimensions
are shown in inches (centimeters) and pounds (kilograms) unless otherwise noted.

CHMD

Optical System – Ovate refractors or full
cutoff flat lens styles provide a choice of
efficient light distributions for every applications. Optics are computer designed
for maximum performance. One-piece
screw shell socket for positive retention
of lamp under vibration.
Electrical System – Lag, high power factor or constant wattage autotransformer
standard. Two- or three-position (L1, L2,
N) tunnel type compression terminal
block standard.
Installation – Four-bolt mast arm mount –
the most secure mounting in the industry.
Listings – IP64 rated optical assembly.
IP65 rating available; see Options. Standard product is NOT listed by UL, CSA or
NOM. For specific listing requirements,
consult factory.

CHM
1.14 ft2 (.11 m2)
1.3 ft2 (.12 m2)
71/2 (19.1)
14 (35.6)
311/2 (80.0)
143/4 (37.5)
41 (18.6)

CHMD
1.14 ft2 (.11 m2)
1.3 ft2 (.12 m2)
71/2 (19.1)
14 (35.6)
311/2 (80.0)
143/4 (37.5)
45 (20.4)

www.lithonia.com
keyword: CH

IP65
LSA1
LSA2
SF
SF10
SF15
SF20
DF
DF10
DF15
DF20
DDB
DBL

Lamp included
Coated lamp
included (MV)
NEMA twist-lock
receptacle only
(photocontrol not
included)
NEMA twist-lock PE
(120V, 208V, 240V)
NEMA twist-lock PE
(480V)
NEMA twist-lock PE
(277V)
Charcoal filter,
silicone lens gasket
IP65 rating for optics
Single lighting surge
arrestor 8
Dual lighting surge
arrestor 8
Single 5 amp fuse9
Single 10 amp fuse9
Single 15 amp fuse9
Single 20 amp fuse9
Double 5 amp fuse10
Double 10 amp fuse10
Double 15 amp fuse10
Double 20 amp fuse10
Dark bronze finish
Black finish

Shipped Separately11
SC

Shorting cap for PER
option.

Large Roadway Lighting
Ideal for roadways, residential streets,
storage areas, parking lots, shopping centers, apartments and condominium complexes, campuses and parks.
Features
Construction – Die-cast trigger latch on
lower housing for easy one-hand opening for relamping and servicing. Large
surface area "breathing-seal" polyester
gasketing protects reflector and lens
from contaminants; maintains maximum
optical efficiency. Die-cast low copper
aluminum alloy for light weight,
strength and reliable service. Available
with or without twist-lock photocontrol
receptacle.
Finish – Gray polyester powder paint finish
is electrostatically applied for superior corrosion resistance.

Ordering Information

CHX

Wattage

NEMA distribution
R2
R3

DLG

Mercury Vapor
700MV
1000MV
High Pressure Sodium
310S
400S
1000S

Lens

Voltage

Ballast options

Drop lens
glass
(standard)

120
208
240
277
480
TB 1
TB1 1
TB2 1
TB3 1
120/2402
240/4803
L/E4

(blank) Standard
ballast (see
Features)

NOTES:
1 Optional multi-tap ballast (120V, 208V, 240V, 277V). TB
prewired to 277V. Others are: TB1 = 120V, TB2 = 208V, TB3 =
240V.
2 MV only, prewired to 120V.
3 MV only, prewired to 240V.
4 Shipped without ballast/electrical components.
5 Available in 120V and 240V only.
6 120V and 277V only.
7 208V, 240V and 480V only.
8 May be ordered as an accessory.

Options
Installed
LPI
PER

PE1
PE4
PE7
IP65
LSA1
LSA2
SF
SF10
SF15
SF20
DF
DF10
DF15
DF20
DDB
DBL

Lamp included
NEMA twist-lock
receptacle only
(photocontrol not
included)
NEMA twist-lock PE
(120V, 208V, 240V)
NEMA twist-lock PE
(480V)
NEMA twist-lock PE
(277V)
IP65 rating for optics
Single lighting surge
arrestor 5
Dual lighting surge
arrestor 5
Single 5 amp fuse6
Single 10 amp fuse6
Single 15 amp fuse6
Single 20 amp fuse6
Double 5 amp fuse7
Double 10 amp fuse7
Double 15 amp fuse7
Double 20 amp fuse7
Dark bronze finish
Black finish

Shipped Separately8

Dimensions do not include mounting arm. Dimensions
are shown in inches (centimeters) and pounds (kilograms) unless otherwise noted.
EPA
Depth
Length
Width
Weight

NEW

Example: CHX 400S R2 DLG 120 LPI PER

Metal Halide
1000M

CHX
1.96 ft2 (.18 m2)
161/4 (41.3)
383/8 (97.5)
171/2 (44.5)
76 (34.5)

CHX

Optical System – Precision ovate refractor/reflector optics provide a uniform distribution pattern with superior luminaireto-pole spacing. One-piece screw shell
socket provides positive retention of
lamp under vibration.
Electrical System – Constant wattage autotransformer standard. Two- or three-position (L1, L2, N) tunnel type compression
terminal block standard.
Installation – Four-bolt mast arm mount –
the most secure mounting in the industry.
Listings – Standard product is NOT listed
by UL, CSA or NOM. For specific listing
requirements, consult factory.

Intended Use

Series

Roadway Lighting

SC

Shorting cap for PER
option.

CHX

www.lithonia.com
keyword: CH

Outdoor / PSG8

447

Site Lighting

Square Bollards

KBS
KBE

Intended Use
For walkways, plazas or pedestrian areas.
Features
Housing – Bottom housing is 0.188" extruded aluminum. Top cover is a weldment of
0.188" aluminum extrusion and 0.250" aluminum plate. 42" overall height standard.
Flush-fitting lens is ¼", clear, 100% virgin
acrylic. Exposed hardware is tamper-resistant stainless steel. Four ½" x 11" anchor
bolts with double nuts/washers and 4½"diameter bolt circle template provided for
mounting (shipped separately). Dark
bronze (DDB) corrosion-resistant polyester powder finish standard; other architectural colors available. Architectural
Class I dark bronze anodized finish also
available on KBS8.

KBE – Decorative
Square

KBS – Square

Optics – Reflector system incorporates
an anodized, spun aluminum flared cone
and an anodized, hydroformed, fluted upper reflector providing a Type V (Symmetric) cutoff distribution. Optional cylindrical lower reflector available.
Electrical – Ballasts are copper wound
and 100% factory tested. Electrical components are unitized on removable power
module and accessible through bottom of
bollard. Positive-locking, quick-disconnect on secondary circuit. Medium-base
porcelain socket, 4KV pulse rated.
Listings – UL Listed (standard). CSA
Certified (see Options). UL listed for wet
locations.

Ordering Information

Designation

6" Bollards:
High Pressure Sodium
KB_6 35S 1
KB_6 50S
KB_6 70S
Metal Halide
KB_6 50M 2
KB_6 70M 2
Incandescent
KB_6 I 1,3
KBS6

KBS8

KBE6

Reflector

Standard Flared Cone:
R5 Type V
distribution

Optional Cylindrical
Reflector:
CYA Specular Alzak
CYB Black Alzak
CYG Gold Alzak
CYF Flat black

KBE8

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Square
Height*
Max weight

8" Bollards:
High Pressure Sodium
KB_8 50S
KB_8 70S
KB_8 100S
KB_8 150S
Metal Halide
KB_8 70M 2
KB_8 100M 2
Incandescent
KB_8 I 1,4

Example: KBS6 35S R5 120 CR

KBE6/KBS6
6 (15.2)
42 (106.7)
43.2 lbs (19.6 kg)

KBE8/KBS8
8 (20.3)
42 (106.7)
43.2 lbs (19.6 kg)

NOTES:
1 120V only.
2 Requires coated lamp.
3 116W/TS, lamp not included.
4 150W max, lamp not included.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.

*Also available in 24" (H24), 30" (H30) and 36" (H36).

448

Outdoor / PSG8

www.lithonia.com
keywords: KBS and KBE

Voltage

Options/Accessories

120
208
240
277
347
TB 5

Options (installed)
SF Single fuse (120V, 277V,
347V)
DF Double fuse (208V, 240V)
CR Enhanced corrosion
resistance
H24 24" overall height
H30 30" overall height
H36 36" overall height
FD Festoon outlet
FG Festoon outlet with duplex
ground fault receptacle
PC Polycarbonate lens
CSA CSA Certified
Accessories (shipped separately)
S6S Half-shield (6" square)
S8S Half-shield (8" square)
For optional Architectural Colors, see page 485.

Site Lighting

Round Bollards
Intended Use
For walkways, plazas or pedestrian areas.
Features
Housing – KB_6: Bottom housing is 0.125"
extruded aluminum. Top cover is 0.156" cast
aluminum. KB_8: Bottom housing is 0.156"
extruded aluminum. 42" overall height standard on KBR and KBA6. 43" overall height
standard on KBA8. Flush-fitting lens is ¼",
clear, 100% virgin acrylic. All exposed hardware is tamper-resistant stainless steel.
Four ½" x 11" anchor bolts with double nuts/
washers and 4½"-diameter bolt circle template provide for mounting (shipped separately). Dark bronze(DDB) corrosion-resistant polyester powder finish standard;
other architectural colors available.
Optics – Reflector system incorporates an
anodized, spun aluminum, flared cone and

an anodized, hydroformed, fluted upper
reflector providing a Type V (Symmetric)
cutoff distribution. Optional cylindrical
lower reflector or cast aluminum louvers
available.
Electrical – All ballasts are copper wound
and 100% factory tested. Electrical components are unitized on removable power
module and accessible through bottom of
bollard. Positive-locking quick disconnect
on secondary circuit. Medium-base porcelain socket, 4KV pulse rated.
Listings – UL Listed (standard). CSA
Certified (see Options). UL listed for wet
locations.

KBA
KBD
KBD – Soft Corner

KBA – Dome-Top

Shown with optional louvers.

Ordering Information

Designation

6" Bollards:
High Pressure Sodium
KB_6 35S 1
KB_6 50S
KB_6 70S
Metal Halide
KB_6 50M 2
KB_6 70M 2
Incandescent
KB_6 I 1,3
8" Bollards:
High Pressure Sodium
KB_8 50S
KB_8 70S
KB_8 100S
KB_8 150S
Metal Halide
KB_8 70M 2
KB_8 100M 2
Incandescent
KB_8 I 1,4
Compact Fluorescent5
KB_8
22DTT
KB_8
28DTT
KB_8
26TRT
KB_8
32TRT

Example: KBA6 35S R5 120 CR

Reflector

Voltage

Standard Flared Cone
R5 Type V distribution

120, 208, 240,
277, 347, TB6

Options/Accessories

Optional Cylindrical
Reflector
CYA Specular Alzak
CYB Black Alzak
CYG Gold Alzak
CYF Flat black

Options (shipped installed)
SF Single fuse (120V, 277V, 347V)
DF Double fuse (208V, 240V)
CR Enhanced corrosion
resistance
H24 24" overall height
H30 30" overall height
H36 36" overall height
FD Festoon outlet
FG Festoon outlet with duplex
ground fault receptacle
PC Polycarbonate lens (6" only)7
SCL Scribed lens7
CSA CSA Certified

KBA6

KBA8-LV

For optional Architectural Colors, see page 485.

Louver (8" ONLY)
LV Louvers

Accessories (shipped separately)
R6S Half-shield (6" round)
R8S Half-shield (8" round)7

KBD8-LV

KBD6
NOTES:
1 120V only.
2 Requires coated lamp.
3 116W/TS, lamp not included.
4 150W max, lamp not included.
5 Louver must be used.
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
7 Not available with LV option, available in 6" units only.

www.lithonia.com
keywords: KBA and KBD

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Diameter
Height*
Max weight

KBD6/KBA6
6 (15.2)
42 (106.7)
34.9 lbs (15.9 kg)

KBD8/KBA8
8 (20.3)
42 (106.7)
34.9 lbs (15.9 kg)

*Also available in 24" (H24), 30" (H30) and 36" (H36)

Outdoor / PSG8

449

Site Lighting

Round Bollards

KBC
KBR

Intended Use
For walkways, plazas or pedestrian areas.
Features

KBR – Round

KBC – Decorative Round

Housing – KB_6: Bottom housing is 0.125"
extruded aluminum. Top cover is 0.156" cast
aluminum. KB_8: Bottom housing is 0.156"
extruded aluminum overall height standard. Flush-fitting lens is ½", clear, 100%
virgin acrylic. All exposed hardware is
tamper-resistant stainless steel. Four ½" x
11" anchor bolts with double nuts/washers and 4½"-diameter bolt circle template
provided for mounting (shipped separately). Dark bronze (DDB) corrosion-resistant
polyester powder finish standard; other
architectural colors available.
Optics – Reflector system incorporates an
anodized, spun aluminum, flared cone and
an anodized, hydroformed, fluted upper

reflector providing a Type V (Symmetric)
cutoff distribution. Optional cylindrical
lower reflector or cast-aluminum louvers
are available.
Electrical – All ballasts copper wound and
100% factory tested. Electrical components unitized on removable power module and accessible through bottom of
bollard. Positive-locking, quick-disconnect on secondary circuit. Medium-base
porcelain socket, 4KV pulse rated.
Listings – UL Listed (standard). CSA
Certified (see Options). UL listed for wet
locations.

Shown with optional louvers.

Ordering Information

Example: KBR8 100M R5 120 CR

Designation

6" Bollards:
High Pressure Sodium
KB_6 35S 1
KB_6 50S
KB_6 70S
Metal Halide
KB_6 50M 2
KB_6 70M 2
Incandescent
KB_6 I 1,3
KBC6

KBR6

KBC8-LV

KBR8-LV

8" Bollards:
High Pressure Sodium
KB_8 50S
KB_8 70S
KB_8 100S
KB_8 150S
Metal Halide
KB_8 70M 2
KB_8 100M 2
KBR8 175M 2,4
Incandescent
KB_8 I 1,5
Compact Fluorescent 4
KB_8 22DTT
KB_8 28DTT
KB_8 26TRT
KB_8 32TRT

Reflector
Standard Flared Cone
R5 Type V
distribution

Options/Accessories

Optional Cylindrical
Reflector
CYA Specular Alzak
CYB Black Alzak
CYG Gold Alzak
CYF Flat black

KBC6/KBR6
6 (15.2)
42 (106.7)
34.9 lbs (15.9 kg)

Louver (8" only)
LV Louvers

Outdoor / PSG8

(shipped installed)
Single fuse (120V, 277V, 347V)
Double fuse (208V, 240V)
Enhanced corrosion resistance
24" overall height
30" overall height
36" overall height
Festoon outlet
Festoon outlet with duplex
ground fault receptacle
PC Polycarbonate lens (6" only)7
SCL Scribed lens7
CSA CSA certified

Accessories (shipped separately)
R6S Half-shield (6" round)
R8S Half-shield (8" round)7

NOTES:
1 120V only.
2 Use coated lamp
3 116W/TS, lamp not included
4 Louver must be used.
5 150W max, lamp not included
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
7 Not available with LV option, available in 6" units only.

KBC8/KBR8
8 (20.3)
42 (106.7)
34.9 lbs (15.9 kg)

*Also available in 24" (H24), 30" (H30) and 36" (H36).

450

Options
SF
DF
CR
H24
H30
H36
FD
FG

For optional Architectural Colors, see page 485.

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Diameter
Height*
Max weight

Voltage
120, 208, 240,
277, 347, TB6

www.lithonia.com
keywords: KBC and KBR

Site Lighting

Decorative Post-Tops
Intended Use
Residential streets, office and retail complexes, campuses, parks, condominiums
and hotels.
Features
Constuction – Die-cast aluminum housing
provides long life, strength and dependable service. Durable polyester powder
paint provides long-lasting standard black
finish. Integral die-cast hinged top for easy
lamping and maintenance, with captive
screw latch promoting case maintenance.
NEMA twistlock photocell is unobtrusively
integrated into top cap detail.

TCL

Electrical – Reactor, normal power factor
ballast is standard for HPS units (high power factor available). Constant wattage autotransformer (high power factor) is standard for MH and MV units.
Installation – Unit mounts quickly and easily to 23/8" OD to 3" OD poles or tenons. Set
screws anchor the fixture firmly.

NEW

Listings – Standard product is NOT listed
by UL, CSA or NOM. Complies to ANSI:
C136.2, C136.10, C136.15, C136.16.

Optical System – Reflector/refractor systems deliver IES roadway types II, III or V.
Refractor panels are available in either
acrylic or polycarbonate.

Ordering Information

Series
TCL

Wattage/Lamp
Source
35S1
50S1
70S
100S
150S
175M
175MV

Example: TCL 100S R2A 120 LPI

Distribution

Voltage

Ballast Options

Options

R2A Type II roadway, acrylic
lens
R3A Type III asymmetric,
acrylic lens
R5A Type V symmetric,
acrylic lens
R2P Type II roadway,
polycarbonate lens
R3P Type III asymmetric,
polycarbonate lens
R5P Type V symmetric,
polycarbonate lens

120, 208,
240, 277,
480, TB2,
TB12, TB22,
TB3 2,
120/2403,
240/480 4

(blank) Standard ballast
(see above)
RHP Reactor high
power factor5
50HZ 50 hertz. Consult
factory.
XHP High reactance,
high power
factor 5

Shipped installed in fixture
LPI Lamp included
SF Single fuse (120V, 277V, n/a TB)
DF Double fuse (208V, 240V, 480V,
n/a TB)
PER NEMA twist-lock receptacle
only (photocontrol not
included).
PE1 NEMA twist-lock PE (120V, 208V,
240V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)

Dimensions are shown in inches (centimeters) unless otherwise noted. Dimensions do not include mounting arm.
EPA
Height
Square

1.6 ft2 (0.15m2)
255/8”(57.5)
161/4” (41.3)

Weight

28 lbs. (12.7 kg)

A

NOTES:
1 Only available with 120V.
2 Optional multi-tap ballast (120V, 208V, 240V, 277V). TB
prewired to 277 volt. Others are; 1 = 120V; 2 = 208V; and
3 = 240V.
3 MV only. Prewired to 120V.
4 MV only. Prewired to 240V.
5 HPS only.

www.lithonia.com
keyword: TCL

B

Outdoor / PSG8

451

Site Lighting

Decorative Post-Tops

TPA

Intended Use
Residential streets, office complexes, campuses, parks, shopping areas, condominiums and hotels.
Features
Construction – Die-cast aluminum housing
and spun aluminum hood coated with polyester powder paint for long-lasting, dependable service. Multi-gasketing system
provides weather-proof protection of the
optical assembly with hinged hood and
captive screw latch promoting case of maintenance. Standard finish is grey.

NEW

above), or constant wattage autotransformer (MH and MV) is standard. Other
ballasts are available.
Installation – Cone mounting filter with
three unobtrusive set screws fastens fixture securely to round poles or tenons sized
from 23/8" to 3" OD.
Listing – Standard product is NOT listed by
UL, CSA or NOM. Complies to ANSI: C136.2,
C136.10, C136.15, C136.16.

Optical System – Prismatic refractors deliver IES roadway distribution types II, III or
V. Refractors are available in acrylic, polycarbonate and tempered glass.
Electrical – Reactor, normal power factor
ballast (150-watt HPS and below), lag high
power factor ballast (250-watt HPS and

Ordering Information

Series
TPA

Wattage/Lamp
source
35S 1
50S 1
70S
100S
150S
250S
400S2
175M
250M
400M 2
175MV
250MV
400MV2

Example: TPA 100S R2A 120 LPI

Distribution

Voltage

R2A Type II roadway, acrylic
lens
R3A Type III asymmetric,
acrylic lens
R5A Type V symmetric,
acrylic lens
R2P Type II roadway,
polycarbonate lens
R3P Type III asymmetric,
polycarbonate lens
R5P Type V symmetric,
polycarbonate lens
R2G Type II roadway, glass
lens
R3G Type III asymmetric,
glass lens
R5G Type V symmetric, glass
lens

120
208
240
277
480
TB 3
TB1 3
TB2 3
TB3 3
120/2404
240/4805

All dimensions are inches (centimeters) unless otherwise
noted. Dimensions do not include mounting arm.
EPA:
Height:
Outside Diameter:
Weight:

Options

Ballast options
(blank) Standard ballast
(see above)
RHP6 Reactor high
power factor
50HZ 50 hertz. Consult
factory.
XHP High reactance,
high power
factor. 6

1.3 ft2 (0.12m2)
20”(50.8)
22” (55.9)
41 lbs. (18.6 kg)

Shipped installed in fixture
LPI Lamp included
SF Single fuse (120V, 277V, n/a TB)
DF Double fuse (208V, 240V, 480V, n/a
TB)
PER NEMA twist-lock receptacle only
(photocontrol not included).
PE1 NEMA twist-lock PE (120V, 208V,
240V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)

NOTES:
1 Only available with 120V.
2 Not available with acrylic or polycarbonate lens; must
order with either R2G, R3G or R5G.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V). TB
prewired to 277 volt. Others are; 1=120V; 2=208V; and
3=240V.
4 MV only. Prewired to 120 volt.
5 MV only. Prewired to 240 volt.
6 HPS only.

452

Outdoor / PSG8

www.lithonia.com
keyword: TPA

Site Lighting

Recessed Low-Mount Floods
Intended Use
For use in site walls or as stair lighting.
Features
Housing – One-piece, cast-aluminum
housing (alloy contains less than 0.2%
copper) with integral splice compartment
(46 cu. in.); four ¾" NPT conduit entries.
Lens is one-piece, injection-molded, UVstabilized polycarbonate, .125" minimum
thickness. Tooled-in, stippled texture on
non-optical portions. Die-cut, closed-cell
EPDM gasket. Housing is shipped separately from lens/reflector/power module.
Stainless steel, captive, Philips-type fasteners (tamper-resistant fasteners also
provided). Standard lens finish is dark
bronze enamel (painted on both inside
and outside of non-optical portion).
Black, white and natural aluminum finishes also available. Housing finish is clear
polyester powder for corrosion protec-

KL

tion. Recessed concrete cast in place is
standard; optional mountings available.
Optics – Reflectors are anodized, hydroformed aluminum. Two distributions available: A (for uniform symmetrical area lighting) and D (for left or right directionalthrow area lighting, featuring a unique biadjustable socket assembly that can be
field-adjusted up or down to provide maximum light distribution on stairway plane).
Electrical – All ballasts are copper wound
and 100% factory-tested. Electrical components are unitized on removable power
module. Positive-locking disconnect on
primary and secondary circuits. Mediumbase porcelain socket, 4KV pulse rated.
Listings – UL Listed (standard). CSA
Certified (see Options). UL listed for wet
locations.

Ordering Information

Designation
High Pressure Sodium
KL 50S
KL 70S
KL 100S1
Metal Halide
KL 70M
KL 100M1
Incandescent
KL I 1,2,3,4

Example: KL 50S A 120 QRS

Distribution

Voltage

A Area
D Directional

120
2082
2405
277
347
TB 6

Options/Accessories
Options
SF
QRS
PE
EC
BBS
BBW
BBF
BBR
CSA

(shipped installed)
Single fuse (120V, 277V)
Quartz restrike system
Photoelectric cell (only
available with BBW, BBF)
Emergency circuit
Backbox (stud wall mount)
Backbox (surface wall mount)
Backbox (flat horizontal
surface mount)
Recessed (ceiling, soffit mount)
CSA Certified

Bi-adjustable socket assembly KL "D" distribution

NOTES:
1 For inverted mounting application, maximum wattage
is 70W.
2 150W A21 max in A distribution.
3 100W A21 max in D distribution
4 120V only.
5 Consult factory for availability in Canada.
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada (120V, 277V, 347V; ships a 120V/347V).

Left or right directional light distribution may be
selected in the field.

Dimensions are shown in inches (centimeters) unless otherwise noted.
Height
Width
Depth
Back box
Lens
Max weight

Architectural colors (optional)
DDB Dark bronze (standard)
DBL Black
DNA Natural aluminum
DWH White

KL
121/4 (31.1)
141/4 (36.2)
83/16 (20.8)
6 (15.2)
23/16 (5.6)
15 lbs (7 kg)

www.lithonia.com
keyword: KL

Outdoor / PSG8

453

Floodlighting

Architectural Floodlights

KFL

Intended Use
For landscape and facade lighting.
Features

Shown with standard swivel mount

Housing – Welded, extruded body with cast
end caps. Standard finish is dark bronze
(DDB) corrosion-resistant polyester powder. Other architectural colors available.
Lens Frame – Cast aluminum door frame is
hinged and secured by stainless steel
fasteners. Closed-cell silicone gasket prevents entrance of contaminants.
Lens – Clear, impact-resistant, tempered
glass lens.
Mounting – Standard mount is two-piece,
heavy-duty, cast-aluminum swivel with integral wiring compartment (pictured). Swivel fits over standard 1½" (1.9" OD) to 2" (2.38"
OD) tenon. Painted steel yoke with 3-foot, 16/
3 SEO cable or threaded knuckle mount are
optional.

Ordering Information

Designation
High Pressure Sodium
KFL2
70S
KFL2
100S
KFL2
150S
KFL3
250S
KFL3
400S
Metal Halide
KFL2
70M
KFL2
100M
KFL2
150M
KFL2
175M
KFL3
200M 1
KFL3
250M
KFL3
320M 1
KFL3
350M 1
KFL3
400M 2

Example: KFL2 70S HPN 120 SF LPI

Distribution

Voltage

Spot
Horiz. flood3
Horiz. spot,
narrow
RM Horiz. spot,
medium
RW Horiz. spot, wide
HPN Vertical flood,
narrow
HPM Vertical flood,
medium
HPW Vertical flood,
wide
FT Forward throw

120
2084
2404
277
347
480
TB 5

SP
BP
RN

Wattage
Ballast
High Pressure Sodium
150
SP
HX-HPF
150
HPW
HX-HPF
400
SP
CWA
400
HPW
CWA
Metal Halide
175
SP
CWA
175
HPW
CWA
400
SP
CWA
400
HPW
CWA

Lamp Beam Spread NEMA
Type
HoxVo
Dist.
E17
E17
ET18
ET18

142x127
39x12
60x13
144x140

3x1
7x6
4x1
7x7

ED17
ED17
BT28
BT28

27x15
147x127
42x17
146x140

2x1
7x6
3x1
7x7

W

YK
THK

Yoke mount
Threaded knuckle
mount
Shipped separately
KFLSTM Stanchion mount
KFLSTMTHK Stanchion mount for
THK option6
TM Tenon base mount
KFLWMA Wall mount arm
KFLWMATHK Wall-mount arm for THK
option 6
MP Mounting plate7
FCRA Crossarm adapter7
TS Tenon slipfitter7
KFLTMB Twin mounting bar
KFLTMBTHK Twin mounting bar for
THK option6
AJB Architectural J-box for
THK option6
KFLTBS Triangular base

EPA
Width
Depth
Height
Overall height
Max. weight

KFL2
1.3 ft2 (.12 m2)
17 (43.2)
8 1/16 (19.7)
97/8 (24.8)
14 1/16 (35.6)
29 lbs (13.1 kg)

KFL3
2.0 ft2 (.19 m2)
20 (50.8)
91/16 (23.8)
131/16 (33.2)
1615/16 (42.9)
44 lbs (19.9 kg)

D

Outdoor / PSG8

Options/Accessories

Optional mounting
Installed

Dimensions are shown in inches (centimeters) unless
otherwise noted.

H

454

Optics – Anodized aluminum reflectors; segmented, specular or hammertone finish.
Electrical – 150W and below utilizes a highreactance, high power factor ballast. 175W
and above utilizes a constant-wattage autotransformer ballast. Both ballast are copper wound and 100% factory tested. Optional pulse start ballast available.
Socket – Medium-base (KFL2) or mogulbase (KFL3) porcelain socket with copper
alloy, nickel-plated screw shell and center
contact. 4KV pulse rated. UL listed 660W,
600V.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL
listed for wet locations. IP65 rated in accordance with standard IEC 529.

www.lithonia.com
keyword: KFL

Installed
SF Single fuse, 120V, 277V, 347V (n/a TB)
DF Double fuse, 208V, 240V, 480V (n/a TB)
PE Photoelectric cell, button type
(n/a TB)
QRS Quartz restrike system (KFL3 only,
100W max.) (lamp not included)
EC Emergency circuit
CR Enhanced corrosion resistance
CFRO Color lens/rose
CFBL Color lens/blue
SCWA Super CWA pulse start ballast (n/a
with HPS, 70M, 100M or 175M)
LPI Lamp included as standard
L/LP Less lamp
CSA CSA Certified
NOM NOM Certified (consult factory)
For optional architectural colors, see page 485.

Shipped
UV
EV
FV
BV
WG
BD
HLV
VLV
BVG

separately8
Upper visor
Eggcrate visor (black)
Full visor
Bottom visor
Wireguard
Barn door
Horizontal louver (black)
Vertical louver (black)
Bubble vandal guard

NOTES:
1 Must be ordered with SCWA.
2 ED-28 reduced jacket lamp required.
3 KFL2 only.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 For use with THK mounting only. Must include THK
mount option on fixture.
7 For use with yoke mounting only. Must include yoke
mount option on fixture.
8 Field modification required unless ordered with fixture.

Floodlighting

Contour Specification Large Floodlights

TFA

Electrical – High-power factor, constantwattage autotransformer. Ballast is copper
wound and 100% factory tested. UL listed.
Electrical components mounted to rear
housing for maximum heat dissipation. (For 50
hertz availability, consult factory.)
Installation – Tool-less latches on front
bezel can be opened while wearing
gloves. Corrosion-resistant, painted steel
mounting yoke.
Socket – Porcelain, horizontally or vertically oriented, mogul-base socket with
copper alloy, nickel-plated screw shell
and center contact.
Listings – UL Listed (standard) (ambient
temperature 25°C for 750W and above,
40°C for 400W and below). CSA Certified
or NOM Certified (see Options). UL listed
for wet locations. IP65 rated in accordance with standard IEC 529.

Intended Use
For industrial yards, parking lots, construction sites, streets and recreational areas.
Features
Housing – Heavy-duty construction.
Contoured die-cast aluminum housing
and front bezel. Bezel hinged and latched
for fast, easy tool-less internal access to
optical and electrical compartments.
Lens is heavy-duty, thermal shock-resistant, clear tempered glass with no metalto-glass contact. Standard finish is dark
bronze (DDB) corrosion-resistant polyester powder.
Optics – Computer-designed, precision
die-formed, specular anodized aluminum
reflector provides high efficiencies.
Premium, one-piece silicone gasket
seals optical chamber to inhibit entrance
of outside contaminants.

Contour

Ordering Information

Example: TFA 1000M TA TB LPI

Distribution

Designation
High Pressure Sodium Horizontal
RN T A
TFA 250S
RN T A
TFA 400S
TFA 750S
RN T A
TFA 1000S
RN T A
Metal Halide
TFA 250M
RN T A
TFA 320M 1
RN T A
TFA 350M 1
RN T A
TFA 400M
RN T A
TFA 750M 1
RN T A
TFA 1000M
RN T A

RB
RB
RB
RB

RM
RM
RM
RM

RB
RB
RB
RB
–
RB

RC
RC
RC
RC
–
–

RM
RM
RM
RM
–
RM

RE
RE
RE
RE
–
RE

Ballast

Lamp Beam Spread NEMA
Type
H° x V°
Dist.

High Pressure Sodium (mog/clear)
400
TA
CWA
ET18
400
RN
CWA
ET18
400
TA2
CWA
ET18
400
RB
CWA
ET18
1000
TA
CWA
E25
1000
RN
CWA
E25
1000
TA2
CWA
E25
1000
RB
CWA
E25

140x134
127x30
138x112
126x106
139x133
127x21
144x119
128x114

7x7
6x3
7x6
6x6
7x7
6x2
7x6
6x6

Metal Halide (mog/clear)
400
TA
CWA
400
RN
CWA
400
TA2
CWA
400
RB
CWA
1000
TA
CWA
1000
RN
CWA
1000
TA2
CWA
1000
RB
CWA

143x133
129x35
135x111
124x100
146x135
130x45
144x119
126x109

7x7
6x3
7x6
6x6
7x7
6x3
7x6
6x6

BT37
BT37
BT37
BT37
BT56
BT56
BT56
BT56

NOTES:
1 Must be ordered with SCWA.
2 Not available in Canada in 1000W metal halide.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V).
In Canada 120V, 277V, 347V; ships as 120V/347V.
4 Optional 5-tap ballast (120V, 208V, 240V, 277V,
480V).
5 Not available in multi-tap ballast.
6 Lamp not included.

Options/Accessories

Voltage

Vertical
RC RE TA2
RC RE TA2
– – TA2
– – TA2

Lamp/Fixture/Distribution Data
Wattage

®

TA2
TA2
TA2
TA2
–
TA2

120
208 2
240 2
277
347
480 2
TB 3
TBV 4

Installed
SF Single fuse (120V, 277V, 347V)5
DF Double fuse (208, 240, 480V)5
EC Emergency circuit6,7
QRS Quartz restrike system6,7
QRSTD Quartz time delay6,7
CR Enhanced corrosion resistance
CRT Non-stick protective coating8
PER NEMA twist-lock receptacle9
LS Lamp support (standard w/ 1000W,
TA and RN)
LPI Lamp shipped as standard
L/LP Less lamp
IS Integral slipfitter (23/8" to 27/8" OD
tenon)
CF Charcoal filter
C62 2' 16-3 SEO cord prewired10
C42 2' 14-3 SEO cord prewired10
C22 2' 12-3 SEO cord prewired10
TP Tamperproof latches
SCWA Super CWA pulse start ballast
(n/a HPS or 1000M)
CSA CSA Certified11
NOM NOM Certified (consult factory)

Accessories / shipped separately
TFAWG Wireguard
TFAVG Vandal guard
TFAUV Upper visor12
TFAFV Full visor12
TFABV Bottom visor
FTS Tenon slipfitter (23/8" to 27/8" OD
tenon) (yoke only)
FCRA Crossarm adapter (horizontal)
FCRA45 Crossarm adapter (45° from
horizontal)
FPMB Wood pole/pipe/wall-mounting
bracket (includes FCRA)
FRWB Radius wall bracket13
FSAB Steel angle bracket
FSPB Steel square pole bracket (for
use with existing poles)
PE1 NEMA twist-lock photocontrol
(120V, 208V, 240V)
PE3 NEMA twist-lock photocontrol
(347V)
PE4 NEMA twist-lock photocontrol
(480V)
PE7 NEMA twist-lock photocontrol
(277V)
SC Shorting Cap
TM Tenon Mount13
For additional options and accessories, see page 484.

Dimensions are shown in inches
(centimeters) unless otherwise noted.
7 Quartz lamp wattage not to exceed ballast
wattage rating.
8 Black finish only.
9 Photocell not included.
10 Yoke-mount only.
11 Not available with TBV.
12 Field modification required unless ordered
with fixture.
13 Requires IS or FTS slipfitter.

www.lithonia.com
keyword: TFA

EPA
Width
Depth
Height
Overall height
Weight

TFA
2.6 ft2 (.24 m2)
22 (59.9)
93/4 (24.7)
183/4 (47.6)
221/2 (57.1)
65 lbs (29.5 kg)

H

W

Outdoor / PSG8

D

455

Floodlighting

Contour Specification Medium Floodlights

TFL
Contour

Intended Use
For recreation areas, parking lots, building
facades and car lots.

®

Features
Housing – Compact, soft-corner, die-cast aluminum housing and front cover. Front bezel is
fully sealed with one-piece, bonded silicone
gasket. Lens is thermal- and shock-resistant,
clear, tempered glass. Standard finish is dark
bronze (DDB) corrosion-resistant polyester
powder.
Optics – TA2: vertical lamp with onepiece, hydroformed, anodized aluminum
reflector. Two-position adjustable socket.
RA2: horizontal lamp with anodized specular aluminum reflector. Both have sealed
optic chamber to inhibit entrance of outside contaminants.
Electrical – Components mounted to castaluminum housing for maximum heat-dissi-

Ordering Information

Designation

Example: TFL 400S RA2 TB LPI

Distribution

VERTICAL LAMP
High Pressure Sodium
TFL
70S
TFL
100S
TFL
150S
TFL
200S
Metal Halide
TFL
150M
TFL
175M
TFL
200M 1
TFL
250M
HORIZONTAL LAMP
High Pressure Sodium
TFL
250S
TFL
400S
Metal Halide
TFL
200M 1
TFL
250M
TFL
320M 1
TFL
350M 1
TFL
400M 2

TA2 (7x 6)
TA2
TA2
TA2
TA2
TA2
TA2
TA2

RA2
RA2

Voltage
120
208 3
240 3
277
347
480 4
TB 5
TBV 6

(7x6)

RA2
RA2
RA2
RA2
RA2

Options/Accessories
Installed
SF
DF
EC
QRS
CR
CRT
PER
LS
IS
CF
C62
C42
C22
CSA
NOM
SCWA
LPI
L/LP

Single fuse (120V, 277V, 347V)7
Double fuse (208V, 240V, 480V)7
Emergency circuit8,9
Quartz restrike system8,9
Enhanced corrosion resistance
Non-stick protective coating10
NEMA twist-lock receptacle11
Lamp support (mogul socket only)
Integral slipfitter(23/8" OD max. tenon)
Charcoal filter
2' 16-3 SEO cord prewired12
2' 14-3 SEO cord prewired12
2' 12-3 SEO cord prewired12
CSA Certified13
NOM Certified (consult factory)
Super CWA pulse start ballast
(n/a HPS, or 175M)
Lamp included as standard.
Less lamp

Architectural textured colors available. Consult your
Lithonia Lighting representative.
NOTES:
1 Must be ordered with SCWA.
2 Requires T-15, ED or BT28 reduced jacket lamp.
3 Consult factory for availability in Canada.
4 Not available in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). (In
Canada 120V, 277V, 347V; ships as 120V/347V).
6 Optional 5-tap ballast (120,208,240,277,480V)
7 Not available with multi-tap ballast.
8 Lamp not included.
9 Quartz lamp wattage not to exceed ballast wattage rating.
10 Black finish only.
11 Photocell not included.
12 Yoke mount only.
13 Not available with TBV.
14 Field modification required unless ordered wth fixture.
15 Requires IS or FTS slipfitter.

456

Outdoor / PSG8

pation. Ballast is high-reactance, highpower factor (70-150W HPS) or constantwattage autotransformer (175 and above
HPS, MH), copper wound and 100% factory
tested. UL listed.
Installation – Corrosion-resistant, heavyduty painted steel mounting yoke. External screws treated for corrosion resistance. Above-horizontal aiming capability standard.
Socket – Glazed porcelain, vertically or
horizontally oriented mogul-base socket
with copper alloy, nickel-plated screw
shell and center contact. UL listed 1500W,
600V, 4KV pulse rated.
Listings – UL Listed (standard) (ambient
temperature 25oC for 320W & above and
200S, 40oC for 250W and below). CSA Certified or NOM Certified (see Options). UL
listed for wet locations. IP65 rated in accordance with standard IEC 529.

Shipped separately
WG Wireguard14
VG Vandal guard14
UV Upper visor14
FV Full visor14
FTS Tenon slipfitter (23/8" to 27/8" OD tenon)
FRWB Radius wall bracket15
FSAB Steel angle bracket
FCRA Crossarm adapter(horizontal)
FCRA45 Crossarm adapter
(45o from horizontal)
FPMB Wood pole/pipe/wall-mounting
bracket (includes FCRA)
SC Shorting cap
TM Tenon mount15
Dimensions are shown in inches (centimeters) unless
otherwise noted.

TFL
1.3ft2 (.12 m2)
153/4 (40.0)
61/8 (15.6)
161/8 (40.9)
27 lbs (11.8 kg)

EPA
Width
Depth
Height
Weight
D

W

Lamp/Fixture/Distribution Data (Vertical Lamp)
Wattage

Ballast

Lamp Beam Spread NEMA
Type
H° x V°
Dist.

High Pressure Sodium (mog/clear)
100 TA2
HX-HPF
E17
148 x 123
150 TA2
HX-HPF
E17
155 x 119
250 RA2
CWA
BT28
143 x 111
400 RA2
CWA
BT28
143 x 111
Metal Halide (mog/clear)
175 TA2
CWA
BT28
147 x 122
250 RA2
CWA
BT28
140 x 104
400 RA2
CWA
BT28
145 x 100
www.lithonia.com
keyword: TFL

7x6
7x6
7x6
7x6
7x6
7x6
7x6

H

Contour Specification Medium Floodlights

Floodlighting

aluminum housing, promoting maximum
heat dissipation. Ballast is high-reactance HPF (70-150W HPS). 150M ballast is
high reactance HPF constant-wattage autotransformer (175W and above HPS,
MH), copper wound and 100% factory
tested.
Installation – Corrosion-resistant, heavyduty painted steel mounting yoke. External screws treated for corrosion resistance. Above-horizontal aiming standard.
Socket – 150M is medium base. Glazed porcelain, horizontally oriented, mogul-base
with copper alloy, nickel-plated screw shell
and center contact. UL listed 1500W, 600V,
4KV pulse rated.
Listings – UL Listed (standard) (ambient
temperature 25°C for 320W and above,
40°C for 250W and below). CSA Certified
or NOM Certified (see Options). UL listed
for wet locations. IP65 rated in accordance with standard IEC 529.

TFR

Intended Use
For recreation areas, parking lots, building
facades and car lots.
Features
Housing – Compact, soft corner, die-cast
aluminum housing and front cover. Front
bezel is removable via position-oriented
hinge-cam design and is fully sealed with
one-piece, bonded silicone gasket. Lens
is thermal- and shock-resistant clear tempered glass. Standard finish is dark
bronze (DDB) corrosion-resistant polyester powder.
Optics – Die-formed, anodized aluminum
reflectors provide rectangular, uniform
distributions. Three available beam distributions for maximum flexibility in area lighting applications. Does not require use of
reduced-size lamp.
Electrical – Components mounted to cast-

Ordering Information
Designation
High Pressure
TFR
150S
TFR
250S
TFR
400S
Metal Halide
TFR
150M
TFR
175M
TFR
200M 1
TFR
250M
TFR
320M 1
TFR
350M 1
TFR
400M

Ballast

Distribution

Voltage

T A (7x6) (n/a
150S)
RB (6x6)
RC (5x5)

120
208 2
240 2
277
347
480 3
TB 4
TBV 5

Lamp Beam Spread NEMA
Type.
H° x V°
Dist.

High Pressure Sodium (mog/clear)
150 RB
XHP
E17
150 RC
XHP
E17
250 TA
CWA
ET18
250 RB
CWA
ET18
250 RC
CWA
CWA
400 TA
CWA
ET18
400 RB
CWA
ET18
400 RC
CWA
ET18
Metal Halide (mog/clear)
175 TA
CWA
BT28
175 RB
CWA
BT28
175 RC
CWA
BT28
250 TA
CWA
BT28
250 RB
CWA
BT28
250 RC
CWA
BT28
400 TA
CWA
BT37
400 RB
CWA
BT37
400 RC
CWA
BT37

®

Example: TFR 400M TA TB LPI

Lamp/Fixture Data
Wattage

Contour

114 X 107
100 X 92
132 X 118
110 X 104
99 x 97
132 X 118
110 X 104
99 X 97

6x6
5x5
7x6
6x6
5x5
7x6
6x6
5x5

132 x 111
121 x 91
100 x 90
132 x 111
121 x 91
100 x 90
138 x 119
124 x 107
96 x 100

7x6
6x5
5x5
7x6
6x5
5x5
7x6
6x6
5x5

Options/Accessories
Installed
SF
DF
EC
QRS
CR
CRT
PER
IS
LS
LPI
L/LP
C22
C42
C62
CF
CSA
NOM
SCWA

Shipped separately
TFRWG Wireguard13
Single fuse (120V, 277V, 347V)6
TFRVG Vandal guard13
Double fuse (208V, 240V, 480V)6
TFRUV Upper visor13
Emergency circuit7,8
TFRFV Full visor13
Quartz restrike system7,8
FRWB Radius wall bracket14
Enhanced corrosion resistance
FSAB Steel angle bracket
Non-stick protective coating9
SC Shorting cap for PER option
NEMA twist-lock photoelectric
receptacle 10
FTS Tenon slipfitter (23/8" to 27/8" OD tenon)11
Integral slipfitter (23/8" O D tenon)
FCRA Crossarm adapter (horizontal)
Lamp support
FCRA45 Crossarm adapter 45° from horizontal
Lamp included as standard
FPMB Wood pole/pipe/wall mounting bracket
(includes FCRA)
Less lamp
TM Tenon mount14
2' 12-3 SEO cord pre-wired11
EY Extended yoke
2' 14-3 SEO cord pre-wired11
2' 16-3 SEO cord pre-wired11
Charcoal filter
CSA Certified12
NOM Certified (consult factory)
Dimensions are shown in inches (centimeters)
Super CWA pulse start ballast (n/a HPS
unless otherwise noted.
or 175M)

NOTES:
1 Must be ordered with SCWA.
2 Consult factory for availability in Canada.
3 Not available in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
5 Optional 5-tap ballast (120V, 208V, 240V, 277V, 480V).
6 Not available in multi-tap ballast.
7 Lamp not included.
8 Quartz lamp wattage not to exceed ballast wattage rating.
9 Black finish only.
10 Photo-cell not included.
11 Yoke mounting only.
12 Not available with TBV.
13 Field modification required unless ordered with fixture.
14 Requires IS or FTS slipfitter.

www.lithonia.com
keyword: TFR

EPA
Height
Width
Depth

TFR
1.3ft2 (.12m2)
123/4 (32.4)
175/8(44.8)
103/4 (27.3)

Outdoor / PSG8

457

Floodlighting

Contour Specification Mini Floodlights

TFM
Contour

Intended Use
For signs, flags, building facades and landscaping.

®

Features
Housing – Compact, heavy-duty construction. Die-cast aluminum housing and
removable front bezel. Lens is thermal and
shock-resistant, clear tempered glass.
Standard finish is dark bronze (DDB) corrosion-resistant polyester powder.
Optics – Hydroformed, anodized aluminum, faceted parabolic (RB, RG) or dieformed (TA) construction provides high
efficiencies. Medium-base lamp is included.
Electrical – Ballast is high-reactance,
high-power factor for 50-150W metal halide or constant wattage autotransformer for 175W metal halide. Ballast is reactor normal-power factor for high pressure sodium (XHP available). Ballast is

Ordering Information

Designation

Example: TFM 175M RB 120 LPI

Distribution

Voltage

(7x6)3

120
2084
2404
277
4805
TB6
TBV 7
MVOLT8

High Pressure Sodium
TFM 35S 1
TFM 50S 2
TFM 70S
TFM 100S
TFM 150S
Metal Halide
TFM 50M
TFM 70M
TFM 100M
TFM 150M
TFM 175M
Compact Fluorescent
TFM 13DTT
TFM 18DTT
TFM 26DTT
TFM 32TRT
TFM 42TRT

TA
RB (6x6)
RG (3x3)

TFM
.5ft2 (.05m2)
10.6 (26.9)
6.9 (17.5)
101/2 (26.7)
15 lbs (6.8 kg)

W

Outdoor / PSG8

GMF
CR

LPI
Single fuse (120V,
277V, 347V)9,10
Double fuse (208V,
240V, 480V)9,10
Internal slow-blow
fuse (CF only)
Enhanced corrosion
resistance
Non-stick protective
coating11
Photocell9

Lamp included
as standard
Less lamp
Yoke mounting
2' 16-3 SEO
cord pre-wired
2' 14-3 SEO cord
pre-wired
2' 12-3 SEO cord
pre-wired
CSA Certified12
NOM Certified
(consult factory)

L/LP
YK
C62
C42
C22
CSA
NOM

SCWA

Super CWA pulse
start ballast (only
available in 150M
with TA distribution
only)
Shipped separately
TFMWG
Wireguard
TFMVG
Vandal guard
TFMUV
Upper visor
TFMFV
Full visor
TFMTS
Tenon slipfitter (23/8"
OD tenon) (fits on 1/2"
knuckle)
TM
Tenon mount14

Lamp/Fixture/Ballast Data13

H

458

DF

PE

Dimensions are shown in inches (centimeters) unless otherwise noted.

D

Options/Accessories
Installed
SF

CRT

Wattage

EPA
Width
Depth
Height
Weight

copper wound and 100% factory tested.
UL 1029 listed. Electrical components
mounted to the cast-aluminum housing
for maximum heat-dissipation.
Installation – Die-cast aluminum ½"
NSPM threaded mounting knuckle is
standard. Steel painted mounting yoke
optional. Above-horizontal aiming capability standard. External screws treated
for corrosion resistance.
Socket – Porcelain, medium-base, horizontally-oriented (RB, RG) or verticallyoriented (TA) socket with copper alloy,
nickel-plated screw shell and center contact. UL listed 1500W, 600V. 4-pin socket
for compact fluorescent.
Listings – UL Listed ((standard) ambient
temperature 25oC for 150M and above, 40oC
for 100M and below; 150S and below). CSA
Certified or NOM Certified (see Options).
UL listed for wet locations. IP65 rated in
accordance with standard IEC 529.

Lamp
Ballast

High Pressure Sodium (med/clear)
70
RB
RNP or XHP
70
RG
RNP or XHP
70
TA
RNP or XHP
150
RB
RNP or XHP
150
RG
RNP or XHP
150
TA
RNP or XHP
Metal Halide (med/clear)
100
RB
XHP
100
RG
XHP
100
TA
XHP
175
RB
CWA
175
RG
CWA
Fluorescent
26DTT RB
HPF-Electronic
42TRT RB
HPF-Electronic

Beam Spread
Type

NEMA
HoxVo

Dist.

E17
E17
E17
E17
E17
E17

94 x 104
42 x 35
131 x 103
88 x 95
57 x 65
131 x 103

5x6
3x3
7x6
5x5
4x4
7x6

E17
E17
E17
ED17
ED17

83 x 108
58 x 60
128 x 107
97 x 105
42 x 35

5x6
4x4
6x6
5x6
4x4

T4
T4

125 x 132
120 x 122

6x6
6x6

www.lithonia.com
keyword: TFM

NOTES:
1 120V only.
2 120V, 277V only
3 TA distribution not available with 175M, compact fluorescent lamps, TBV, or fusing.
4 Consult factory for availability inCanada.
5 Not available in Canada.
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
7 Optional 5-tap ballast (120V, 208V, 240V, 277V, 480V).
8 Optional multi-volt electronic ballast capable of
operating from 120V-277V
9 Not available in multi-tap ballast.
10 Not available with TA reflector.
11 Black finish only.
12 Not available with TBV.
13 Other ballasts available. Consult factory.
14 Requires TFMTS.

Floodlighting

General Purpose Micro Floodlights
Intended Use
For signs, landscaping and commercial or
residential building facades.

TFS

Listings – UL Listed to U.S. and Canadian
safety standards. UL/C-UL listed for wet
locations.

Features
Housing – Compact, rugged die-cast aluminum housing is ribbed for maximum heat
dissipation. Hinged die-cast aluminum
door frame inhibits the entrance of external contaminant. Standard finish is bronze
polyester powder.
Installation – Adjustable mounting knuckle with ½" NPS threaded stem mounts to
standard outlet boxes.
Optics – Anodized aluminum reflector with
high efficiency and wide beamspread.
Tempered glass lens. Medium-base, E17
lamp included in carton as standard.
Electrical – Reactor HPS or high-reactance
(MH) normal power factor.

Ordering Information

Designation
High Pressure Sodium
TFS 50S
TFS 70S
TFS 100S
TFS 150S
Metal Halide
TFS 70M

Example: TFS 50S 120 LPI

Options

Voltage
120

LPI

Lamp included as standard

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Width
Depth
Height
Max. weight

D

TFS
87/8 (22.5)
61/8 (15.6)
6.5 ft (16.5 m )
6.48 lbs (2.94 kg)

W

H

www.lithonia.com
keyword: TFS

Outdoor / PSG8

459

Floodlighting

General Purpose Quartz Floodlights

TQ/TQE

Intended Use
For signs, landscaping, and commercial or
residential building facades.
Features

ended quartz 500W lamp. 1500W models do
not include double-ended quartz 1500W
lamp.
Listings – UL Listed to U.S. and Canadian
safety standards. UL/C-UL listed for wet
locations.

Housing – Compact, rugged, die-cast aluminum housing is ribbed for maximum heat
dissipation. TQ has a die-cast aluminum
door frame, TQE lens attaches via tool-less
clips. TQ1500 door frame is die-cast aluminum with tool-less latch closure. Standard finish bronze polyester powder.
Installation – Adjustable mounting knuckle with ½" NPS threaded stem. Mounts to
standard outlet boxes.
Optics – Anodized aluminum reflector with
high efficiency and wide beamspread. Tempered glass lens with high temperature
gasketing. 500W models include double-

TQ

TQ1500

Ordering Information

Example: TQ 1500 L/LP

Designation
Quartz
TQ 1500

Voltage
Determined by lamp
(277V maximum)

Ordering Information
Designation
Quartz
TQE 500
T Q 500

D

W

H

460

Outdoor / PSG8

Dimensions are shown in inches
unless otherwise noted.
TQ 1500
Width
13 (33.0)
Depth
6 (15.2)
Height
81/4 (21.0)
Max. weight
6 lbs (2.72 kg)

www.lithonia.com
keyword: TQ

Options
L/LP Lamp NOT included
(must be supplied by others.)

Example: TQE 500 120 LPI
Voltage
120

(centimeters)

TQ/TQE 500
87/8 (22.5)
31/2 (8.9)
61/2 (16.5)
2.07 lbs (.93 kg)

Options
(blank)
DWH
LPI

Bronze (500W only)
White (500W only)
Lamp included (500W models)

Intended Use
For signs, landscaping and commercial or
residential building facades.

General Purpose Floodlights

Floodlighting

Listings – UL Listed to U.S. and Canadian
safety standards. UL/C-UL listed for wet
locations.

TCF
NEW

Features
Housing – Compact, rugged, die-cast aluminum housing is ribbed for maximum heat
dissipation. Hinged die-cast aluminum door
frame with tool-less latch closure. Standard finish bronze polyester powder.
Installation – Adjustable mounting knuckle with ½" NPS threaded stem. Mounts to
standard outlet boxes.
Optics – Anodized aluminum reflector with
high efficiency and wide beamspread. Tempered glass lens with high temperature
gasketing. 13W twin-tube compact fluorescent lamps.

Ordering Information

Designation
TCF
TCF

13DTT
2/13DTT

Example: TCF 2/13DTT 120 LPI

Voltage
120

Options
LPI

Lamp included

Dimensions are shown in inches (centimeters)
unless otherwise noted.
TCF
Width
87/8(22.5)
Depth
31/2 (8.9)
Height
61/2 (16.5)
Max. weight
2.07 lbs (.93 kg)

www.lithonia.com
keyword: TCF

D

W

H

Outdoor / PSG8

461

Floodlighting

Hazardous Location Large Floodlights

HFA

Intended Use
For general to heavy industrial applications, including Class 1, Division 2 classified hazardous locations, marine and corrosive environments or wherever excessive vibration and dirt may exist.
Features
Construction – NEMA heavy-duty constructed housing. Die-cast copper-free
(<.4%)aluminum housing with round corners and front bezel. Front bezel is removable via position-oriented hinge-cam design. Lens is thermal- and shock-resistant,
clear tempered glass with no metal-to-glass
contact. Hardware is corrosion-resistant.
Finish – Standard finish is dark bronze (DDB)
corrosion-resistant polyester powder.
Optics – Porcelain, horizontally oriented
mogul-base socket with copper alloy,
nickel-plated screw shell and center contact. UL listed 1500W, 600V, 4KV pulse rated. TA and RN distributions are available.

Computer-designed, precision formed reflectors for high performance and efficency. Premium one-piece silicone gasket
seals optical chamber to inhibit entrance
of contaminants.
Electrical – Ballast is HPF constant-wattage autotransformer, copper wound and
100% factory tested. Electrical components
are mounted to cast aluminum housing,
promoting maximum heat dissipation. Accesible through front bezel.
Installation – Front bezel is latched for easy
tool-less internal access to optical and
electrical compartments. Corrosion-resistant, heavy-duty, painted steel mounting
yoke. Three-quarter-inch female threaded conduit hub provided.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed Class 1, Division 2, Groups A, B, C, and D for hazardous
locations. UL listed for marine outside locations. IP65 rated in accordance with
standard IEC 529.

Ordering Information

Example: HFA 400M TA 120 LPI

Designation
High Pressure Sodium
HFA
250S
HFA
400S
Metal Halide
HFA
250M
HFA
400M

Distribution

Voltage

T A (7x7)

120
208 1
240 1
277
347
480 1
TB 2

RN (6x3)

Options
Installed
CR Enhanced corrosion resistance
CRT Non-stick protective coating3
LS Lamp support
LPI Lamp included as standard
L/LP Less lamp
TP Tamperproof latches
CSA CSA Certified
DNA Architectural color – natural
aluminum

DBL Architectural color, black
DMB Architectural color, medium
bronze
DGC Architectural color, charcoal
gray
DTG Architectural color, tennis green
DSS Architectural color, sandstone
DWH Architectural color, white
Architectural textured colors available. Consult
your Lithonia Lighting representative.

NOTES:
1 Consult factory for availability in Canada.
2 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
3 Black finish only.

Temperature Codes
Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA
Width
Depth
Overall height
Weight

H

W

462

Outdoor / PSG8

HFA
2.6 ft2 (.24 m2)
233/4 (60.3)
93/4 (24.8)
24 (61) (includes yoke)
65 lbs (29.5 kg)

D

www.lithonia.com
keyword: HFA

Description

Wattage

HFA
HFA
HFA
HFA

250M
400M
250S
400S

T-Code
or Temp.
T1
T1
T1
T1

Max. Internal
Temp.
336°C
343°C
301°C
352°C

Floodlighting

Hazardous Location Medium Floodlights
Intended Use
For general to heavy industrial applications, including Class 1, Division 2 classified hazardous locations, marine and corrosive environments or wherever excessive vibration and dirt may exist.
Features
Construction – Compact NEMA heavy-duty
constructed housing. Die-cast copper-free
(<.4%) aluminum housing with rounded corners and front bezel. Front bezel is removable via position-oriented hinge-cam design. Lens is thermal- and shock-resistant,
clear tempered glass with no metal-to-glass
contact. Hardware is corrosion resistant.
Finish – Standard finish is dark bronze (DDB)
corrosion-resistant polyester powder.
Optics – Porcelain, horizontally oriented
mogul-base socket with copper alloy,
nickel-plated screw shell and center contact. UL listed 1500W, 600V, 4KV pulse rat-

Ordering Information

Designation
Metal Halide
HFL
400M 1
High Pressure Sodium
HFL
400S

HFL

ed. RA2 distribution is available. Computerdesigned, precision-formed reflector for
high performance and efficiency. Premium one-piece silicone gasket seals optical chamber to inhibit entrance of outside
contaminants. 400W metal halide requires
an ED28 reduced jacketed lamp.
Electrical – Ballast is HPF constant-wattage autotransformer, copper wound and
100% factory tested. Electrical components
are mounted to the cast aluminum housing, promoting maximum heat dissipation.
Accessible through front bezel.
Installation – Corrosion-resistant, heavyduty, painted steel mounting yoke. Threequarter-inch female threaded conduit hub
provided.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed, Class 1, Division 2, Groups A, B, C, and D for hazardous
locations. UL listed for marine outside locations. IP65 rated in accordance with standard IEC 529.

Example: HFL 400S RA2 TB LPI

Distribution

Voltage

RA2 (7x6)

120
208 2
240 2
277
347
4802
TB 3

Options
Installed
CR Enhanced corrosion resistance
CRT Non-stick protective coating4
LS Lamp support
LPI Lamp included as standard
L/LP Less lamp
CSA CSA Certified

DGC
DTG
DNA
DBL
DMB
DSS
DWH

Architectural color, charcoal gray
Architectural color, tennis green
Architectural color, natural aluminum
Architectural color, black
Architectural color, medium bronze
Architectural color, sandstone
Architectural color, white

Architectural textured colors available. Consult your
Lithonia Lighting representative.

NOTES:
1 Must use reduced jacket ED-28 lamp.
2 Consult factory for availability in Canada.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
4 Black finish only.

Temperature Codes
Description

Wattage

HFL
HFL

400M
400S

T-Code Max. Internal
or Temp.
Temp.
T1
433°C
T1
426°C

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA
Width
Depth
Height
Weight

HFL
1.3 ft2 (.12 m2)
153/4 (40.0)
61/8 (15.5)
161/8 (40.9) (includes yoke)
27 lbs (12.3 kg)

H

H

W

www.lithonia.com
keyword: HFL

D

Outdoor / PSG8

463

Floodlighting

Hazardous Location Medium Floodlights

HFR

Intended Use
For general to heavy industrial applications, including Class 1, Division 2 classified hazardous locations, marine and corrosive environments, or where excessive
vibration and dirt may exist.
Features
Construction – Compact NEMA heavy-duty
constructed housing. Die-cast copper-free
(<.4%) aluminum housing with rounded corners and front bezel. Front bezel is removable via position-oriented hinge-cam design. Lens is thermal- and shock-resistant,
clear tempered glass with no metal-to-glass
contact. Hardware is corrosion resistant.
Finish – Standard finish is dark bronze (DDB)
corrosion-resistant polyester powder.
Optics – Porcelain, horizontally oriented
mogul-base socket with copper alloy,
nickel-plated screw shell and center contact. UL listed 1500W, 600V, 4KV pulse rat-

Ordering Information

Designation
Metal Halide
HFR
250M
HFR
400M
High Pressure Sodium
HFR
150S
HFR
250S
HFR
400S

ed. TA, RB and RC distributions are available. Computer-designed, precisionformed reflector for high performance and
efficiency. Premium one-piece silicone
gasket seals optical chamber to inhibit entrance of outside contaminants. Does not
require use of reduced-size lamp.
Electrical – Ballast is HPF constant-wattage autotransformer, copper wound and
100% factory tested. Electrical components
mounted to cast aluminum housing, promoting maximum heat dissipation. Accesible through front bezel.
Installation – Corrosion-resistant, heavyduty, painted steel mounting yoke. Threequarter-inch female threaded conduit hub
provided.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed, Class 1, Division 2, Groups A, B, C, and D for hazardous
locations. UL listed for marine outside locations. IP65 rated in accordance with standard IEC 529.

Example: HFR 400M TA 120 LPI

Distribution
T A (7x6)
RB (6x6)
RC (5x5)

Options

Voltage
120
208 1
240 1
277
347
480 1
TB 2

Installed
CR
CRT
LS
LPI
L/LP
CSA

Enhanced corrosion
resistance
Non-stick protective
coating 3
Lamp support
Lamp included as standard
Less lamp
CSA Certified

DNA
DBL
DMB
DGC
DTG
DSS
DWH

Architectural
aluminum
Architectural
Architectural
Architectural
Architectural
Architectural
Architectural

color, natural
color, black
color, medium bronze
color, charcoal gray
color, tennis green
color, sandstone
color, white

Architectural textured colors available. Consult your
Lithonia Lighting representative.

NOTES:
1 Consult factory for availability in Canada.
2 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
3 Black finish only.

Temperature Codes
Dimensions are shown in inches (centimeters) unless
otherwise noted.
HFR
EPA
1.3 ft2 (.12 m2)
Width
175/8 (44.8)
Depth
103/4 (32.4)
Height
13 (33.0) (includes yoke)
Weight
29 lbs (13.2 kg)

464

Outdoor / PSG8

www.lithonia.com
keyword: HFR

Description Wattage
HFR
HFR
HFR
HFR
HFR

250M
400M
150S
250S
400S

T-Code Max. Internal
or Temp.
Temp.
T1
347°C
T1
359°C
T2B
238°C
T1
332°C
T1
376°C

Floodlighting

Hazardous Location Mini Floodlights
Intended Use
For general to heavy industrial applications, including Class 1, Division 2 classified hazardous locations, marine and corrosive environments or where excessive
vibration and dirt may exist.
Features
Construction – NEMA heavy-duty constructed housing. Die-cast copper-free
(<.4%) aluminum housing with round corners and front bezel. Front bezel is removable via position-oriented hinge-cam design. Lens is thermal- and shock-resistant,
clear tempered glass with no metal to glass
contact. Hardware is corrosion resistant.
Finish – Standard finish is dark bronze (DDB)
corrosion-resistant polyester powder.
Optics – Porcelain, horizontally oriented
medium-base socket with copper alloy,
nickel-plated screw shell and center contact. UL listed 660W, 600V, 4KV pulse rated.

Ordering Information

Designation
Metal Halide
HFM 175M
High Pressure Sodium
HFM 100S
HFM 150S

HFM

RB and RG distributions are available. Computer-designed, precision-formed reflectors for high performance and efficiency.
Premium one-piece silicone gasket seals
optical chamber to inhibit entrance of contaminants.
Electrical – Ballast is HPF constant-wattage autotransformer, copper wound and
100% factory tested. Electrical components
mounted to cast aluminum housing, promoting maximum heat dissipation. Accessible through front bezel.
Installation – Corrosion-resistant, heavyduty, painted steel mounting yoke. Threequarter-inch female threaded conduit hub
provided.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed, Class 1, Division 2, Groups A, B, C, and D for hazardous
locations. UL listed for marine outside locations. IP65 rated in accordance with
standard IEC 529.

Example: HFM 175M RB 120 LPI

Distribution
(Select one)
RB (6x6)
RG (3x3)

NOTES:
1 HPS wattages require a high reactance, high power factor
ballast (XHP).
2 208 & 240V HPS in Canada, a constant wattage isolated
ballast CWI is standard.
3 Not available in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
5 Black finish only.

Options

Voltage
High Pressure Sodium
120
208 1,2
240 1,2
277 1
347 1
480 1,3
120/2771,3
120/347 1
TB 4
Metal Halide
120
208 3
240 3
277
347
480 3
120/277 3
120/347
TB 4

Installed
CR
CRT
LPI
L/LP
CSA
DNA
DBL
DMB
DGC
DTG
DSS
DWH

Enhanced corrosion resistance
Non-stick protective coating5
Lamp included as standard
Less lamp
CSA Certified
Architectural color, natural aluminum
Architectural color, black
Architectural color, medium bronze
Architectural color, charcoal gray
Architectural color, tennis green
Architectural color, sandstone
Architectural color, white

Architectural textured colors available. Consult your Lithonia
Lighting representative.

Temperature Codes
Description Wattage
HFM
HFM
HFM

175M
100S
150S

T-Code Max. Internal
or Temp.
Temp.
T1
402°C
280
280°C
350
341°C

Dimensions are shown in inches (centimeters) unless
otherwise noted.
HFM
EPA
.5 ft2 (.05 m2)
Width
101/2 (26.9)
Depth
63/4 (17.5)
Height
101/2 (26.9) (includes yoke)
Weight
15 lbs (6.8 kg)

www.lithonia.com
keyword: HFM

Outdoor / PSG8

465

Floodlighting

High-Performance Floodlights

95

Intended Use
For large area facade or monument floodlighting.
Features
Housing – Rugged, heavy-gauge, aluminum housing, horizontal (95) or vertical
(95V) lamp orientation. Continuous welded
seams, fully gasketed for weathertight integrity. Standard finish is dark bronze
(DDB) corrosion-resistant polyester powder; other architectural colors available.
Architectural Class 1 anodize finish also
available.
Door Frame – Aluminum door frame secured with four stainless steel latches.
Lens – Thermal-resistant and shock-re-

Shown with TS mounting option

Ordering Information

Example: 95 1000S RMH 120 SF

Designation

Distribution

HORIZONTAL HOUSING
High Pressure Sodium
95 1000S
Metal Halide
95 1000M
VERTICAL HOUSING
High Pressure Sodium
95V 1000S
Metal Halide
95V 1000M

Horiz.
Lamp
RMH
RNH1
RWH
BPH2
SPH2

Vert.
Lamp
RMV
RNV3
RWV
BPV2
SPV2

Voltage
120
2084
2404
277
347
4804
TB 5

Optional mounting
Shipped separately
TS Tenon slipfitter6
(23/8"OD max.)
FCRA Crossarm adapter 6
FCRA45 Crossarm adapter
(45° from horizontal)6
EWB Extended wall
bracket 6
MP Mounting plate6
TM Tenon mount (base
mount)7

Lamp/Fixture Data
95

Distribution
RMH
RNH
RWH
BPH
SPH
RMV
RNV
RWV
BPV
SPV

D

W

H

466

Outdoor / PSG8

sistant tempered flat lens.
Mounting – Painted steel yoke complete
with vertical angle selector stop, reaiming, and 3-foot, 14/3 SEO cable is standard.
Optics – Segmented anodized aluminum,
precisely formed to provide varying rectangular beam patterns (non-rotatable).
Electrical – Constant-wattage autotransformer ballasts, copper wound and 100%
factory tested.
Socket – Mogul-base porcelain socket
with copper alloy, nickel-plated screw shell
and center contact. UL listed 1500W-600V.
4KV pulse rated. Uses BT 56 lamp.
Listings – UL Listed (standard). CSA Certified
(see Options). UL listed for wet locations.

1000M
4x1
3x1
5x1
–
2x1
5x3
3x3
5x4
5x4
–

1000S
5x2
–
5x1
–
4x1
6x6
6x5
6x6
6x6
–

95V

1000M
3x5
3x3
3x5
4x5
–
1x4
1x3
1x4
–
1x2

1000S
6x6
5x6
6x6
6x6
–
2x5
–
1x5
–
1x4

Dimensions are shown in inches (centimeters) unless
otherwise noted.
95
95V
EPA
4.7 ft2 (.44 m2)
4.3 ft2 (.40 m2)
Width
241/2 (62.5)
21 (53.5)
Height
30 (77)
30 (77)
Depth
121/2 (31.8)
181/8 (46)
Max. weight
90 lbs (40.7 kg)
90 lbs (40.7 kg)

www.lithonia.com
keyword: 95

Options/Accessories
Installed
SF
DF
PER
CSA
LPI
L/LP

Single fuse (120V, 277V, 347V, n/a TB)
Double fuse (208V, 240V, 480V, n/a TB)
NEMA twist-lock receptacle only
CSA certified
Lamp included as standard
Less lamp

For optional Architectural Colors, see page 485.

Shipped separately
UV
Upper visor
BV
Bottom visor
FV
Full visor (4-sided)
GV
Glare visor (3-sided)
CV
Concentric visor
VG
Vandal guard
SC
Shorting cap for PER option
PE1
NEMA twist-lock photocontrol
(120V, 208V, 240V)8
PE3
NEMA twist-lock photocontrol
(347V)8
PE4
NEMA twist-lock photocontrol
(480V)8
PE7
NEMA twist-lock photocontrol
(277V)8
Outdoor remote
MR1
Non-encapsulated

NOTES:
1 Not available with 95 1000S.
2 BPH and SPV for use with 95V only. SPH and BPV for use
with 95 only.
3 Not available with 95V 1000S.
4 Consult factory for availability in Canada.
5 Multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V,
277V, 347V; ships as 120V/347V.
6 For use with YK mounting (standard) only.
7 For use with TS option only.
8 PER must be ordered with fixture.

Floodlighting

High-Performance Floodlights
Intended Use
For large area facade or monument floodlighting.
Features
Housing – Rugged, heavy-gauge, aluminum housing, horizontal (55) or vertical
lamp (55V) orientation. Continuous welded
seams, fully gasketed for weathertight integrity. Standard finish is dark bronze (DDB)
corrosion-resistant polyester powder. Architectural class 1 anodize finish also
available.
Door Frame – Aluminum door frame secured with four stainless steel latches.
Lens – Thermal-resistant, tempered flat
lens.

Shown with TS mounting option.

Ordering Information

Example: 55 750S RPN 120 SF

Distribution

Designation

55

Mounting – Painted, steel yoke complete
with angle selector, aiming stop, and 3foot, 14/3 SEO cable is standard.
Optics – Anodized aluminum reflector. Seven
distributions available to provide varying
rectangular beam patterns (non-rotatable).
Electrical – Constant-wattage autotransformer ballasts, copper wound and 100%
factory tested.
Socket – Mogul-base porcelain socket with
copper alloy, nickel-plated screw shell and
center contact. UL listed 1500W-600V. 4KV
pulse rated.
Listings – UL Listed (standard). CSA Certified
(see Options). UL listed for wet locations.

HORIZONTAL HOUSING & LAMP
High Pressure Sodium
55 750S
55 1000S
Metal Halide
55 320M 1
55 350M 1
55 400M
55 1000M
VERTICAL HOUSING & LAMP
High Pressure Sodium
55V 750S
55V 1000S
Metal Halide
55V 320M1
55V 350M 1
55V 400M
55V 1000M

Optional mounting

Shipped separately
Installed
TS Tenon slipfitter 6
SF
(23/8"OD max.)
FCRA Crossarm adapter 6
DF
FCRA45 Crossarm adapter
(45° from horizontal)6
PER
EWB Extended wall
bracket 6
CSA
MP Mounting plate6
Voltage
TM Tenon mount
LPI
120
(base mount)7
2084
L/LP
2404
QRS
277
SCWA
347
4804
TB 5

Single fuse (120V, 277V,
347V,
n/a TB)
Double fuse (208V,
240V, 480V, n/a TB)
NEMA twist-lock
receptacle only
CSA Certified (120V,
277V, 347V only)
Lamp included as
standard
Less lamp
Quartz restrike8,9
Super CWA pulse start
ballast (n/a HPS or
1000M)

For optional Architectural Colors, see page 485.

Lamp/Fixture Data
55

Distribution
RME
RNE
RPN
RWE
RNA
RMA
RWA

Options/Accessories

RME 2
RNE 2
RPN2
RWE 2
RNA3
RMA 3
RWA 3

1000M
6x5
6x4
6x2
6x5
5x1
6x6
6x5

NOTES:
1 Must be ordered with SCWA.
2 RME, RNE, RPN, RWE require reduced jacket BT-37 lamp
with 1000M.
3 RMA, RNA, RWA are for use with 1000M only and require
standard BT-56 lamp.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 For use with YK mounting (standard) only.
7 For use with TS option only. TS included.
8 Lamp not included.
9 Quartz lamp wattage not to exceed ballast wattage rating.
10 PER must be ordered with fixture.

400M
6x5
6x4
6x2
6x5
–
–
–

Shipped separately
UV
Upper visor
BV
Bottom visor
FV
Full visor (4-sided)
GV
Glare visor (3-sided)
VG
Vandal guard
SC
Shorting cap for PER
option
PE1
NEMA twist-lock
photocontrol
(120V, 208V, 240V)10
PE3
NEMA twist-lock
photocontrol (347V)10
PE4
NEMA twist-lock
photocontrol (480V)10
PE7
NEMA twist-lock
photocontrol (277V)10
Outdoor remote
MR1
Non-encapsulated

55V

1000S
6x5
6x4
5x1
6x5
–
–
–

1000M
4x6
4x6
1x6
5x6
1x5
6x6
6x7

400M
5x6
4x6
1x6
5x6
–
–
–

1000S
5x6
4x6
1x5
5x6
–
–
–

Dimensions are shown in inches (centimeters) unless
otherwise noted.
55
55V
EPA
3.5 ft2 (.33 m2)
3.8 ft2 (.35 m2)
Width
231/4 (59.1)
173/8 (44.1)
Height
23 (58.4)
33 (83.8)
Depth
141/2 (36.8)
125/8 (32.1)
Max. weight
91 lbs (41.2 kg)
98 lbs (44.3 kg)

www.lithonia.com
keyword: 55

D

W

H

Outdoor / PSG8

467

Floodlighting

High-Performance Floodlights

170S

Intended Use
For airport aprons or parking areas.
Features
Housing – Rugged, heavy-gauge, aluminum housing. Continuous welded seams
for weathertight integrity. Dark bronze
(DDB) corrosion-resistant polyester powder finish; other architectural colors available. Architectural Class 1 anodize finish
also available.
Door Frame – Aluminum door frame secured with four stainless steel latches.
Lens – Thermal-resistant and shock-resistant tempered flat lens.
Mounting – Painted steel yoke, complete
with vertical angle selector, retaining stop
and 3-foot, 14/3 SEO cable is standard.
Optics – Anodized aluminum reflector with
internal glare control louver, painted matte
black to provide an asymmetrical beam
pattern with sharp vertical cutoff.

Electrical – Constant wattage autotransformer ballast, copper wound and 100%
factory tested.
Socket – Horizontal, mogul-base porcelain socket(s) with copper alloy, nickelplated screw shell and center contact. UL
listed 1500W-600V. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified
(see Options). UL listed for wet locations.

Shown with TS mounting option

Ordering Information

Designation

Example: 170S 400S HPN 120 SF

Distribution

Voltage

HPN

120
2083
2403
277
347
4803
TB4

High Pressure Sodium
170S 250S
170S 400S
170S 750S
170S 1000S
Metal Halide
170S 320M 1
170S 350M 1
170S 400M
170S 1000M2

Shipped separately
TS Tenon slipfitter5
(23/8"OD max.)
FCRA Crossarm adapter5
FCRA45 Crossarm adapter (45°
from horizontal)5
EWB Extended wall bracket5
MPB29 Mounting pole bracket
for 2 fixtures at 90°6
MPB39 Mounting pole bracket
for 3 fixtures at 90°6
MPB49 Mounting pole bracket
for 4 fixtures at 90°6

Lamp/Fixture Data

Wattage
Ballast
High Pressure Sodium
250
HPN
CWA
400
HPN
CWA
750
HPN
CWA
1000
HPN
CWA
Metal Halide
400
HPN
CWA
1000
HPN
CWA

D

Lamp
Type

Beam
Spread
HoxVo

NEMA
Dist.

ET18
ET18
BT37
E25

128x55
129x52
133x57
132x56

6x4
6x4
7x4
7x4

BT37
BT37

139x68
138x63

7x4
7x4

Dimensions are shown in inches (centimeters) unless
otherwise noted.

W

H

468

Outdoor / PSG8

Options/Accessories

Optional mounting

EPA
Width
Height
Depth
Max weight

170S
2.7 ft2 (.25 m2)
21 (53.3)
201/2 (52.1)
191/4 (48.9)
83 lbs (37.6 kg)

www.lithonia.com
keyword: 170S

Installed
SF
DF
PER
CSA
QRS
SCWA

Single fuse (120V, 277V, 347V, n/a TB)
Double fuse (208V, 240V, 480V, n/a TB)
NEMA twist-lock receptacle only
CSA Certified
Quartz restrike7,8
Super CWA pulse start ballast
(n/a HPS and 1000M)

For optional Architectural Colors, see page 485.

Shipped separately
UV Upper visor
SC Shorting cap for PER option
PE1 NEMA Twist-lock photocontrol
(120V, 208V, 240V)9
PE3 NEMA twist-lock photocontrol
(347V)9
PE4 NEMA twist-lock photocontrol
(480V)9
PE7 NEMA twist-lock photocontrol
(277V)9
Outdoor remote
MR1 Non-encapsulated

NOTES:
1 Must be ordered with SCWA.
2 Requires a BT-37 reduced jacket lamp.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
5 For use with YK mounting (standard) only.
6 MPB bracket ships separately with junction box and
hinge mechanisms. Bracket weight: 12 lbs.
7 Lamp not included.
8 Quartz lamp wattage not to exceed ballast wattage
rating.
9 PER must be ordered with fixture.

Intended Use
For stadiums, fields, arenas, tracks or
courts.
Features
Housing – Two-piece, die-cast aluminum
ballast housing mounted to steel trunnion. Removable ballast is hinged with
captive fastener. Steel trunnion features
both vertical and horizontal aiming scale
with vertical repositioning stop. Standard finish is white (DWH) corrosion-resistant polyester powder.
Optics – Heavy-gauge anodized reflector
with five distributions available. Transverse
mounting of lamp. Lamp support included.
Optical chamber is sealed to inhibit entrance of contaminants. Heavy-duty hinged
lens is thermal-resistant, shock-resistant
and impact-resistant tempered glass. Lens
frame is secured by spring clips for servicing of lamp. "Flux manager" (NFX, WFX, MFX)
available for optimal glare and spill light

Sportslighters

Sportslighting

control. Choice of General Purpose or heavyduty (shrouded) reflectors.
Electrical System – All electrical components are thermally isolated from optical assembly, promoting longer life.
Ballast is high-power factor, constantwattage autotransformer, copper wound
and 100% factory tested. Below horizontal aiming only.
Installation – Fixture is mounted by securing trunnion directly to crossarm. Mounting hardware is provided.
Socket – Die-cast socket housing. Porcelain, mogul-base socket with copper alloy,
nickel-plated screw shell and springloaded center contact. UL listed 1500W600V, 4KV pulse rated.
Hardware – All external hardware is stainless steel.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed for wet locations. US Patent no. 6,190,023. Canadian
patent no. 2,212,014. Other patent pending.

TSP

Ordering Information

Designation
Metal Halide
TSP
400M1
TSP
1000M
TSP
1500M

Tru-Sport

®

Example: TSP 1500M GP24N 120 SF

General purpose
GP24N
GP24NFX
GP24M
GP24MFX
GP24W
GP24WFX

Options/Accessories

Voltage

Distribution
duty2

Heavy
HD24N
HD24NFX
HD24M
HD24MFX
HD24W
HD24WFX

120
2083
2403
277
347
4803
TB 4

Options (shipped installed)
SF
Single fuse (120V, 277V, 347V) n/a TB
DF
Double fuse (208V, 240V, 480V) n/a TB
QRS
Quartz restrike system (lamp not included)
C62
2 ft. of 16/3 SEO cable pre-wired
C42
2 ft. of 14/3 SEO cable pre-wired
C22
2 ft. of 12/3 SEO cable pre-wired
CV3P
3 ft. of 16/3 EO cord pre-wired with 3-prong plug
(use with prewired cages and crossarms)5,6
CR
Enhanced corrosion resistance
CF
Charcoal filter (heavy-duty only)7
SLR
Stainless steel lens ring
WC
Wood crossarm mounting bolt (5/8"-11 UNC x 7")
SCWA
Super CWA pulse start ballast (400M only)
CSA
CSA Certified
For optional Architectural Colors, see page 485.

Shipped separately8
FTS
Tenon slipfitter

NOTES:
1 May be ordered with SCWA.
2 Heavy-duty anodized aluminum shroud.
3 Consult factory for availability in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
5 Must use mating receptacle, provided by others.
6 N/A 1500M, 120V.
7 HD option must be ordered.
8 See flood accessories sheet for additional ordering
information.

L

Dimensions are shown in inches (centimeters) unless
otherwise noted.
EPA
Diameter
Length
Max weight

TSP
3.3 ft2 (0.91m2)
241/2 (62.2)
20 (50.8)
55 lbs (24.9 kg)

www.lithonia.com
keyword: TSP

D

Outdoor / PSG8

469

Controlled-Beam Sportslighters

Sportslighting

TV

Intended Use
Ideal for recreational or competitive sports
fields, parking areas and industrial yards.
Features
Housing – Heavy-gauge, hydroformed
aluminum ballast housing mounted to
integral die-cast monoframe with horizontal degree aiming scale and repositioning locator. Die-cast aluminum socket
housing provides vertical aiming adjustment with degree aiming scale and repositioning stop.
Optics – Heavy-gauge anodized aluminum reflectors provide a range of
NEMA beam spreads. Optical chamber
sealed to inhibit entrance of contaminants. Hinged lens is heavy-duty, thermal-, shock- and impact-resistant tempered glass.
Electrical – All electrical components contained in ballast housing, which is isolated thermally from socket housing and op-

Ordering Information

Example: TV 1500M GP4 TB

Designation

Distribution1

Voltage

High Pressure Sodium
TV 400S
TV 1000S
Metal Halide
TV 400M
TV 1000M
TV 1500M

GP22

120
2084
2404
277
347
480 4
TB 5

GP32
GP43
GP53
GP6

NOTES:
1 To order heavy-duty aluminum shroud, change GP to HD
in catalog number. Example: TV 400S HD2.
2 Not available for 1000S or 1000H.
3 Not available for 1000H.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
6 Must use mating receptacle, provided by others (n/a
1500M 120V).
7 May be ordered as accessory.

Options/Accessories
Installed
SF
DF
PER
QRS
LS
C62
C42
C22
CV3P

AH
CR
CF
SLR
WC
SCWA
IBL
CSA
NOM

Single fuse (120V, 277V) n/a TB or 347V
Double fuse (208V, 240V, 480V) n/a TB
NEMA PE recept. only, no photocell
Quartz restrike system (lamp not
included)
Lamp support
2 ft. of 16-3 SEO cord pre-wired
2 ft. of 14-3 SEO cord pre-wired
2 ft. of 12-3 SEO cord pre-wired
3 ft. of 16-3 SEO cord pre-wired w/ 3
prong plug for use with pre-wired
cages and crossarms6
Above horizontal aiming
Enhanced corrosion resistance
Charcoal filter (for use with heavyduty shroud only)
Stainless steel lens ring
Wood crossarm mounting bolt
Super CWA Pulse Start Ballast
(400M only)
Internal bottom louver
CSA Certified
NOM Certified (consult factory)

For optional Architectural Colors, see page 485.
General Purpose Reflector (GP)
Heavy-duty Shroud (HD)
Dimensions are shown in inches (centimeters) unless
otherwise noted.

D
EPA
Diameter
Length

L

470

Outdoor / PSG8

tical assembly, promoting longer ballast
life. Ballast is high-power factor, constantwattage autotransformer, copper wound
and 100% factory tested.
Installation – Mounted by securing integral crossarm mounting bracket directly
to cross arm. ⁵⁄₈" x 11UNC mounting bolt
provided. Exposed bolt length: 1¹₂".
Socket – Glazed porcelain, mogul-base
with copper alloy, nickel-plated screw
shell and center contact. UL listed 1500W,
600V.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL
listed for wet locations.

TV
NEMA 2, 3:
NEMA 4, 5, 6:
NEMA 2, 3:
NEMA 4, 5, 6:
NEMA 2, 3:
NEMA 4, 5, 6:

2.9 ft.2 (.27 m2)
2.5 ft. 2 (.23 m2)
231/8, (58.7)
21½ (54.6)
30 (76.2)
31½ (80)

www.lithonia.com
keyword: TV

Shipped separately7
NEMA twist-lock PE photocontrol
PE1 120V-240V
PE3 347V
PE4 480V
PE7 277V
SC Shorting cap (metal halide only)
UV Upper visor
FTS Tenon slipfitter

ORDERING/PACKAGING OPTIONS
To accommodate the product's physical configuration
as well as a range of customer handling and processing needs, alternative ordering/packaging methods are
available.

Example:
(21) TV 1500M GP4 TB
sportslighters
can be ordered/packaged as:
1 Standard Packaging (Optimized form)
To order, use single catalog number shown in example
above. Fixtures ship as multiple components using optimized packaging. Example ships as:
(Qty 21) TV 1500M N4 TB HSG (21 cartons of
1 housing)
(Qty 20) GP20A J4 (5 cartons of 4 reflectors)
Qty 1) GP20A U (1 carton of 1 reflector)
2 Component Packaging
Housings ship in unit cartons. Example:
(Qty 21) TV 1500M N4 TB HSG (21 cartons of
1 housing)
Reflectors ship in multiples of:
GP20A J4 (5 cartons of 4 reflectors)
GP20A U (1 carton of 1 reflector)

Architectural Building Mounted

Building Mounted

up), WTU (wide throw, 10% up) and MDU5
(up/down, medium throw, 50% up, 50%
down). Compact fluorescent MD (medium
throw) only.
Electrical – H.I.D.: 50W-150W utilizes a high
reactance, high power factor ballast. 35S
utilizes a reactance high power factor
ballast. 175W utilizes a constant-wattage
auto transformer ballast. Quick-disconnect plug easily disconnects reflector from
ballast. Ballasts are copper wound and
100% factory tested. Porcelain, mediumbase copper alloy, nickel-plated screw
shell and center contact. UL listed 660W,
600V 4KV pulse rated. CFL: compact fluorescent ballast is Class P, electronic, high
power factor, <10% THD with starting temp.
of 0o F (-18o C). Fluorescent socket is hightemperature thermoplastic with integral
lamp retention clip.
Listings – UL Listed suitable for wet locations (damp location listed in lens-up orientation). CSA Certified (see Options). IP rated.

WSR/WST

Intended Use
For building- and wall-mounted applications.
Features
Housing – Rugged, die-cast, single-piece
housing. Die-cast door frame has 1/8" thick
tempered glass lens. Door frame is fully
gasketed with one-piece solid silicone. Standard finish is textured dark bronze (DDBT)
corrosion-resistant polyester powder with
other architectural colors availabe.
Installation – Universal mounting mechanism with integral mounting support allows fixture to hinge down. Bubble level
provides correct alignment with each installation.
Optics – Interchangeable, segmented
reflectors for superior uniformity and control. Three full cutoff distributions available: FT (forward throw), MD (medium
throw), and WT (wide throw). Four uplightdistributions available: FTU (Forward
throw 10% up), MDU (medium throw, 10%

Ordering Information

Example: WST 175M FT 120 SF LPI

Series
WST

Trapezoid

WSR

Half round

Distribution

Wattage/Source
Metal
Halide
50M
70M
100M
150M
175M

High
Pressure
Sodium
35S1
50S
70S
100S
150S

Compact
Fluorescent 2
26DTT
2/26DTT
32TRT
2/32TRT
42TRT
2/42TRT

Voltage

Downlight Distributions
FT Forward throw
MD Medium throw
(coated lamp
standard)
W T Wide throw

Uplight Distributions3
FTU Forward throw
with 10% uplight
MDU Medium throw
with 10% uplight
(coated lamp
standard)
WTU Wide throw with
10% uplight
MDU5 Up/down medium
throw with 50%
uplight & 50%
NOTES:
downlight (coated
1 120V only.
lamp standard)
2 Only available with MD, MDU, and MDU5 distributions.
3
4
5
6
7

8
9
10
11
12
13
14
15
16
17

NEW

Available on WSR fixture only.
Consult factory for availability in Canada.
Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
Optional penta-tap ballast (120V, 208V, 240V, 277V,
480V; not available in Canada). 175M only.
Optional multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line
voltage from 120V-277V.
Not available with compact fluorescent.
Available for compact fluorescent units only.
Must specify voltage. Not available with MVOLT or TB.
Not available with SF, DF, or QRS.
Not available with 2/32TRT or 2/42TRT.
Black finish only.
Must be ordered with fixture; no field installations.
IBS not available with MD, MDU and MDU5
distributions.
Additional architectural colors available; see
www.lithonia.com for more information.
Must specify finish.

120
2084
2404
277
347
TB 5
TBV 6
MVOLT7

Options
Shipped installed in fixture
SF Single fuse (120V, 277V,
347V, n/a TB)8
DF Double fuse (208V, 240V,
n/a TB or TBV)8
GMF Internal slow-blow
fusing9,10
EC Emergency circuit (25W
max, lamp included)
DC12 Emergency circuit 12 volt11
(35W lamp included
standard)
ELDW Emergency battery pack
(120V or 277V only)9,12
QRS Quartz restrike system
(100W max, lamp not
included) 8
CR Enhanced corrosion
resistance
CRT Non-stick protective
coating13
PE Photoelectric cell-button
type (n/a TB)14
WLU Wet location door for up
orientation
IBS Internal backlight shield15
DFL Diffusing lens
TP Tamperproof
LPI Lamp included as standard
L/LP Less lamp

Dimensions are shown in inches (centimeters) unless
otherwise noted.
WSR
WST
Width
18 (45.7)
161/4 (41.2)
Depth
9 (22.8)
91/8 (23.2)
Height
71/4 (18.4)
71/4 (18.4)
Max weight
30 lbs (13.6 kg)
30 lbs (13.6 kg)

www.lithonia.com
keywords: WSR and WST

Architectural Colors16
Standard Textured Colors
DDBT Dark bronze
(standard)
DSST Sandstone
DNAT Natural aluminum
DWHG White
DBLB Black
Shipped separately
WSBBW Surface-mounted
back box17
UT5 Uptilt 5 degrees17
WSTWG Wire guard (WST)14
WSTVG Vandal guard
(WST)14
WSRWG Wire guard (WSR)14
WSRVG Vandal guard
(WSR)14

D

H

W

Outdoor / PSG8

471

Building Mounted

Architectural Building Mounted

WFL

Intended Use
For building and wall-mounted applications.
Features
Housing – Extruded aluminum body with
cast end caps is mounted with ¼" bolts, to
formed steel wall bracket. Housing body
can be rotated and locked in any position
along horizontal axis. Standard finish is
dark bronze (DDB) corrosion-resistant polyester powder. Other architectural colors
available.
Lens Frame – Cast aluminum frame is hinged
and secured by stainless steel fasteners.
Closed cell silicone gasket prevents the
penetration of dust and moisture.
Lens – Clear, impact-resistant, tempered
glass lens with silkscreen.
Mounting – Steel mounting plate attaches
directly to industry standard junction box.
Mounting plate includes provision for attachment independent of junction box.

Ordering Information

Designation

Metal Halide
WFL2 70M
WFL2 100M
WFL2 150M
WFL2 175M
WFL3 200M1
WFL3 250M
WFL3 320M1
WFL3 350M1
WFL3 400M2

Example: WFL2 175M GZ 120 LPI

SP
BP
RN
RM
RW
HPN
HPM
HPW
FT
GZ

Spot
Horizontal flood3
Horizontal spot,
narrow
Horizontal spot,
medium
Horizontal spot, wide
Vertical flood, narrow
Vertical flood, medium
Vertical flood, wide
Forward throw
Wall grazing

Ballast
High Pressure Sodium
150
SP
HX-HPF
150
HPW
HX-HPF
400
SP
CWA
400
HPW
CWA
Metal Halide
175
SP
CWA
175
HPW
CWA
400
SP
CWA
400
HPW
CWA

Options/Accessories

Voltage

Distribution

High Pressure Sodium
WFL2 70S
WFL2 100S
WFL2 150S
WFL3 250S
WFL3 400S

120
2084
2404
277
347
4804
TB 5

Installed
SF Single fuse (120V, 277V, 347V,
n/a TB)
DF Double fuse (208V, 240V, 480V,
n/a TB)
QRS Quartz restrike system (WFL3 only,
100W max, lamp not included)
CR Enhanced corrosion resistance
CSA CSA Certified
PE Photoelectric cell, button type (n/a
TB 480V)
CFRO Color lens/rose
CFBL Color lens/blue
EC Emergency circuit (WFL3 only)
NEMA
SCWA Super CWA pulse start ballast
Dist.
(n/a HPS, 70M, 100M or 175M)
HoxVo
LC90 Lock at 90o for full cutoff
LPI Lamp included as standard
7x6
L/LP Less lamp

Lamp
Type

Base
Type

Beam
Spread

E17
E17
ET18
ET18

Medium
Medium
Mogul
Mogul

142x127
39x12
60x13
144x140

3x1
4x1
7x7

ED17
ED17
BT28
BT28

Medium
Medium
Mogul
Mogul

27x15
147x127
42x17
146x140

2x1
7x6
3x1
7x7

Dimensions are shown in inches (centimeters) unless
otherwise noted.

H
D

EPA
Width
Depth
Height
Max. weight

WFL2
1.3 ft2 (.12 m2)
181/2 (47)
63/4 (29.8)
113/4 (29.8)
29 lbs (13.1 kg)

WFL3
2.0 ft2 (.19 m2)
211/2 (54.6)
83/4 (22.3)
143/4 (37.5)
44 lbs (19.9 kg)

W

472

Outdoor / PSG8

(Required for WFL3) Optional Backbox wall
mounting available for surface conduit applications.
Optics – Anodized aluminum reflectors: segmented, specular or hammertone finish.
Electrical – 150W and below utilizes a high
reactance, high power ballast. 175W and
above utilizes a constant-wattage autotransformer ballast. Both ballasts are
copper wound and 100% factory tested.
Socket – Horizontal porcelain socket (WFL2
medium-base, WFL3 mogul-base) with copper alloy, nickel-plated screw shell and
center contact. 4KV pulse rated. UL listed
660W, 600W.
Listings – UL Listed (standard). CSA Certified (see Options). UL listed for wet locations. IP65 rated in accordance with standard IEC 529.

www.lithonia.com
keyword: WFL

Architectural colors
(powder finish)6
Standard colors:
DDB Dark bronze (standard)
DWH White
DBL Black
Classic colors:
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
Shipped separately 7
UV Upper visor
EV Eggcrate visor (black)
BV Bottom visor
FV Full visor
WG Wire guard
BD Barn door
HLV Horizontal louver
(black)
VLV Vertical louver (black)
BVG Bubble vandal guard
WFLBBW Back box

NOTES:
1 Must be ordered with SCWA.
2 Requires ED-28 reduced jacket lamp.
3 WFL2 only.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 Additional architectural colors available; see Architectural
Colors brochure on www.lithonia.com.
7 May be ordered as an accessory. Door frame must be
factory drilled.

Building Mounted

Die-Cast Wall-Paks, Glass Refractor
Intended Use
For outdoor storage areas, warehouse and
factory perimeters and loading docks.
Features
Housing – Rugged, die-cast aluminum
housing. Corrosion-resistant captive external hardware includes slotted hexhead fasteners. Standard finish is dark
bronze (DDB) corrosion-resistant polyester powder. Other architectural colors
available.
Optics – Reflector is specular anodized aluminum. Refractor is prismatic borosilicate
glass. Lens is sealed and gasketed to inhibit entrance of outside contaminants.
Electrical – 70-150W HPS and 100-150M:
High-reactance, high-power factor. All
others: Constant-wattage autotransformer. Ballast is copper wound and 100% factory tested. UL listed. Electrical components mounted in hinged front cover that

TWH

includes primary and secondary electrical disconnect.
Installation – Back housing is separated
from front housing, eliminating ballast
weight and promoting easy handling. Top
¾" threaded wiring access. Back access
through removable ¾" knockout. Mount
on any flat, non-combustible vertical surface. Not recommended in applications
where a sprayed stream of water can
come in direct contact with glass lens.
Socket – Glazed porcelain (mogul-base;
175M and above), horizontally oriented
with copper alloy, nickel-plated screw
shell and center contact. 4KV pulse rated.
Medium-base (150M,100S and below) UL
listed 660W, 600V. Mogul-base: UL listed
1500W, 600V.
Listings – UL Listed (standard). CSA or
NOM Certified (see Options). UL listed for
wet locations. IP65 rated (250W and below) or IP54 rated (400W) in accordance
with IEC standard 529.

Ordering Information
Designation
High Pressure Sodium
TWH 70S
TWH 100S
TWH 150S1
TWH 200S
TWH 250S
TWH 400S
TWH 250/400S2
Metal Halide
TWH 100M
TWH 150M
TWH 175M
TWH 200M 3
TWH 250M
TWH 320M 3
TWH 350M 3
TWH 400M 4
Mercury
TWH
TWH
TWH

Vapor
100H
175H
250H

Low Pressure Sodium
TWH 35L 5
Incandescent
TWH 300I 6

Example: TWH 250S TB LPI
Voltage
Installed
SF Single fuse (120V, 277V, 347V)5
DF Double fuse (208V, 240V, 480V)5
EC Emergency circuit11,12
QRS Quartz restrike system11,12
CR Enhanced corrosion resistance
CRT Non-stick protective coating13
PE Photoelectric cell – button type5

120
208 7
240 7
277
347
4808
TB 9
TBV 10

Ballast

Lamp
Type

XHP

Base
Type

CSA

High Pressure Sodium (med/clear)
70
HX-HPF
E17
medium
100 HX-HPF
E17
medium
150 HX-HPF
E17
medium
250
CWA
BT28 medium
400
CWA
BT28 medium

Options/Accessories
NEMA twist-lock receptacle14
NOM NOM Certified (consult
Lamp support (mogul socket only)
factory)
Full shield
LPI Lamp included as
standard
Wireguard15
15
L/LP
Less lamp
Vandal guard
TP Tamperproof fasteners
Super SCWA pulse start ballast
For optional Architectural
(150M-400M only--n/a 175M )
Colors, see page 485.
Reactor high power factor ballast
(HPS 150W & below only)
Reactor normal power factor
ballast (HPS 150W & below only)
Reactance high power factor
ballast (HPS 150W & below only)
CSA Certified16

Accessories

Metal Halide (med(100)/mog/clear)
150 HX-HPF E17
medium
175
CWA
BT28
mogul
250
CWA
BT28
mogul
400
CWA
BT28
mogul

NOTES:
1 Operates 55V lamp.
2 Shipped as 250S.
3 Must be ordered with SCWA.
4 Requires T-15, ED or BT 28 reduced jacket
lamp.
5 Not available TB.
6 120V only, A21 lamp.
7 Consult factory for availability in Canada.
8 Not available in Canada.
9 Optional multi-tap ballast (120V, 208V,
240V, 277V). In Canada 120V, 277V, 347V;
ships as 120V/347V.

RHP
RNP

Lamp/Fixture/Ballast Data17
Wattage

PER
LS
FS
WG
VG
SCWA

10 Optional 5-tap ballast (120V, 208V, 240V,
277V, 480V).
11 Lamp not included.
12 Quartz lamp wattage not to exceed ballast wattage rating.
13 Black finish only.
14 Photocell not included.
15 Requires factory modification.

RK1 PEB1
RK1 PEB2
RK1 PEB1 CSA
RK1 PEB3 CSA
RK1 TWHGL FS
PE1
PE3
PE4
PE7

(Order separately)
Photoelectric control kit, 120V
Photoelectric control kit, 208V,240V,277V
Photoelectric control kit, 120V
Photoelectric control kit, 347V
Field installable full shield, for cutoff
NEMA twist-lock photocontrol, 120V,208V,240V
NEMA twist-lock photocontrol, 347V
NEMA twist-lock photocontrol, 480V
NEMA twist-lock photocontrol, 277V

W

Dimensions are shown in inches
(centimeters) unless otherwise noted.
Height
Width
Depth
Weight

16 Not available with TBV.
17 Other ballast types available.

www.lithonia.com
keyword: TWH

TWH
151/4 (40)
161/4 (41.3)
8 (20.3)
26-42 lbs (12-19kg)

D

H

Outdoor / PSG8

473

Building Mounted

Die-Cast Wall-Paks, Glass Refractor

TWR

Intended Use
For mounting above entryways and loading docks.
Features
Housing – Rugged, die-cast aluminum back
housing and hinged door frame. Castings

NEW

TWR1
TWR1C

TWR2

are sealed with a one-piece gasket to inhibit the entrance of external contaminants. Finish is bronze polyester powder
paint standard.
Installation – Housing configured for mounting directly over a standard 4" outlet box or
for surface wiring via any of three convenient ½" threaded conduit entry hubs.
Optics – (TWR1, TWR2) Refractor is prismatic borosilicate glass. Reflector is dieformed anodized stippled aluminum. TWR1
medium-base and TWR2 mogul-base lamp
included in carton as standard. (TWRIC)
tempered glass lens. One-piece anodized
aluminum reflector.
Electrical – Quad-tap, constant wattage
autotransformer (175M-400M; 250S-400S).
High reactance, high power factor (70S150S; 70M-150M). Ballast is copper wound
and 100% factory tested.
Listings – UL Listed to US and Canadian safety
standards. UL/C-UL listed for wet locations.
(UL tested at 25°C ambient temperature).

Ordering Information

Example: TWR1 70S TB LPI

Voltage

Designation

W

TWR1/TWR2

TWRIC

High Pressure Sodium
TWR1
70S
TWR1 100S
TWR1 150S
TWR2 250S
TWR2 400S

High Pressure
Sodium
TWRIC
70S
TWRIC
100S
TWRIC
150S

Metal Halide
TWR1
70M
TWR1 100M
TWR1 175M
TWR2 250M
TWR2 400M

D

H

Metal Halide
TWRIC
70M
TWRIC
100M
TWRIC
175M

TB 1
120/3472

CSA

Accessories
TWR1WG
TWR2WG
TWR1CWG
RK1 TWR1 FA
RK1 TWR2 FA
RK1 TWR1 CFA
TWRIC FCV

NOTES:
1 TB is 120V, 208V, 240V, 277V. In Canada 120V, 277V, 347V;
ships as 120V/347V.
2 Only available with CSA.

TWR1
D

W

H

TWR1C
474

Outdoor / PSG8

Dimensions are shown in inches (centimeters) unless otherwise noted.
Height
Width
Depth
Max weight

TWR1
9 (22.86)
13 (33.02)
7 3/8 (18.75)
18 lbs (11.8 kg)

TWR2 250W
91/4 (23.50)
177/8 (45.40)
93/8 (23.81)
26 lbs (11.8 kg)

www.lithonia.com
keyword: TWR

Options
LPI

TWR2 400W
9 1/4 (23.50)
177/8 (45.40)
121/2 (31.75)
31 lbs (14.07 kg)

TWRIC
815/32 (21.5)
13 (33)
101/4 (26)

Lamp included as
standard
CSA Certified

(Order separately)
Wireguard
Wireguard
Wireguard
Lens repair kit
Lens repair kit
Lens repair kit
Full cutoff visor

Building Mounted

Cast Wall-Paks, Polycarbonate Refractor
Intended Use
For entrances, loading docks, walkways
and vehicle ramps.
Features
Housing – Rear housing is rugged, die-cast
aluminum. Corrosion-resistant, captive external hardware includes slotted hex-head
and tamperproof fasteners. Finish is dark
bronze (DDB) corrosion-resistant polyester
powder.
Optics – Reflector is aluminum, finished in
white enamel. Front housing and refractor
are one-piece, injection-molded, UVstabilized polycarbonate. Standard finish an opaque portion of front cover and
back housing is dark bronze polyester.
Refractor is sealed and gasketed to inhibit the entrance of outside contaminants.
Electrical – HPS, 70-150M: High-reactance, high-power factor (XHP). 175MH
and MV: Constant-wattage autotrans-

TWP

former. Ballast is copper wound and 100%
factory tested. UL listed. Electrical components mounted on back housing.
Installation – Top ¾" threaded wiring access. Back access through ¾" opening.
For feed-thru wiring, use condulet tee
(not included). Mount on any flat, noncombustible vertical surface.
Socket – Glazed porcelain (mogul base),
horizontally oriented socket with copper
alloy, nickel-plated screw shell and center
contact. Medium-base for 150W and below: UL listed 660W, 600V, 4KV pulse rated. Mogul-base for 175W: UL listed
1500W, 600V, 4KV pulse rated.
Listings – UL Listed (standard). CSA or
NOM Certified (see Options). UL listed for
wet locations. IP65 rated in accordance
with IEC standard 529.

Ordering Information

Designation
High Pressure Sodium
TWP 35S 1,2
TWP 50S1
TWP 70S
TWP 100S
TWP 150S3
Metal Halide
TWP 70M
TWP 100M
TWP 150M
TWP 175M
Mercury Vapor
TWP 100H
TWP 175H

Example: TWP 175M TB LPI

Voltage
120
208 4
240 4
277
347
480 4
TB 5

Installed
SF Single fuse (120V, 277V, 347V)1
DF Double fuse (208V, 240V, 480V)1
EC Emergency circuit6,7
QRS Quartz restrike system6,7
CR Enhanced corrosion resistance
CRT Non-stick protective coating8
PE Photoelectric cell, button type1
LPI Lamp included as standard
L/LP Less lamp
FS Full shield

Options/Accessories
WG Wireguard
SCWA Super CWA pulse start
ballast (150M only)
RHP Reactor high power factor
Ballast (HPS only)
RNP Reactor normal power factor
ballast (HPS only)
XHP Reactance high power
factor ballast (HPS only)

Accessories

Lamp/Fixture/Ballast Data9

Low Pressure Sodium
TWP 35L 1

Lamp
Wattage Ballast

Incandescent
TWP 200I

High Pressure Sodium (med/clear)
35
RHP
E17
medium
50
RHP
E17
medium
70
XHP
E17
medium
100
XHP
E17
medium
150
XHP
E17
medium
Metal Halide (med(70/100/150)/mogul(175)/clear)
50
HX-HPF
E17
medium
70
HX-HPF
E17
medium
100
HX-HPF
E17
medium
150
HX-HPF
E17
medium
175
CWA
BT28
mogul
Mercury Vapor (mog/coated)
100
CWA
E17
medium
175
CWA
BT/ED28 mogul
Low Pressure Sodium (D.C. bay/clear)
35
HPF-LAG
T17
medium

NOTES:
1 Not available with 480V or TB.
2 120V only.
3 Operates 55V lamp.
4 Consult factory in Canada; not available with 35S, 50S and
150M.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 Lamp not included.
7 Quartz lamp wattage not to exceed ballast wattage rating.
8 Black finish on housing only.
9 Other ballast types available.

Base
Type

CSA CSA Certified
NOM NOM Certified (consult
factory)
Architectural Colors (optional)
DNA Natural aluminum
DBL Black
DMB Medium bronze
DWH White
DSS Sandstone

Type

www.lithonia.com
keyword: TWP

(Order separately)

RK1 PEB1 Photoelectric control kit, 120V
RK1 PEB2 Photoelectric control kit, 208V,
240V, and 277V.
RK1 PEB1 CSA Photoelectric control kit, 120V
RK1 PEB3 CSA Photoelectric control kit, 347V
RK1 TWPFA FS Field installable shield for cutoff

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Height
Width
Depth
Weight

TWP
157/16 (39.2)
161/8 (41)
73/4 (19.7)
16 lbs (7 kg)

D

W

H

Outdoor / PSG8

475

Building Mounted

Mini Wall-Paks, Polycarbonate Refractor

TWA
Contour

Intended Use
For entrances, stairwells, corridors and
other pedestrian areas.

®

Features
Housing – Rear housing is rugged, diecast aluminum. Corrosion-resistant, captive external hardware includes slotted
hex-head and tamperproof fasteners. Finish is dark bronze (DDB) corrosion-resistant polyester powder.
Optics – Front housing and refractor are
one-piece, injection-molded, UV-stabilized polycarbonate. High-performance
optical system consists of specular anodized segmented reflector and computer-designed prism pattern. Standard finish is dark bronze polyester enamel. Refractor sealed with one-piece, high-temperature silicone gasket to inhibit entrance of outside contaminants.
Electrical – MH: High-reactance, highpower factor standard. HPS: Reactor normal power factor standard, HPF available.

Ordering Information
Designation
High Pressure Sodium
TWA 35S1
TWA 50S2
TWA 70S3
TWA 100S3
Metal Halide
TWA 50M
TWA 70M
TWA 100M
Compact
TWA
TWA
TWA
TWA
TWA

Example: TWA 100M 120 LPI
Options/Accessories

Voltage
120
2084
2404
277
347
TB 5
MVOLT6

Installed
GMF
SF
DF
EC
QRS
CR
CRT

Fluorescent
22DTT (2-pin)
26DTT (4-pin)
28DTT (2-pin)
32TRT (4-pin)
42TRT (4-pin)

PE
LPI
L/LP
XHP
CSA
NOM

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Height
Width
Depth
Max weight

476

TWA
10 (25.4)
111/2 (29.2)
815/16 (22.7)
14 lbs (6.4 kg)

Outdoor / PSG8

UL listed. Electrical components are
mounted to the cast-aluminum housing,
promoting maximum heat dissipation.
(For 50 hertz availability consult factory). Fluorescent ballasts are magnetic
NPF (22 &28 DTT) or electronic HPF (26
DTT & TRT).
Installation – Top ½" threaded wiring access. Back access through ¾" opening.
For feed-thru wiring, use condulet tee
(not included). Mount on any flat, noncombustible vertical surface. Photocell is
field installable.
Socket – HID is porcelain, horizontally
oriented, medium-base socket with copper alloy, nickel-plated screw shell and
center contact. UL listed 660W, 600V and
4KV pulse rated. Fluorescent is 2-pin
(DTT) or 4-pin (TRT), positive latching
thermoplastic.
Listings – UL Listed (standard). CSA or
NOM Certified (see Options). UL listed for
wet locations. IP65 rated in accordance
with IEC standard 529.

GMF Internal slow-blow
fusing7
Single fuse (120V, 277V, 347V)8
Double fuse (208V, 240V)8
Emergency circuit9,10
Quartz restrike system9,10
Enhanced corrosion
resistance
Non-stick protective coating
(rear housing only)11
Photocell (button type)8
Lamp included as standard
Less lamp
High power factor ballast
(HPS only)
CSA Certified
NOM Certified (consult
factory)

NOTES:
1 120V only.
2 120V or 277V only
3 120 R-NPF is standard, 208V, 240V, 277V, 347V and TB are
high-reactance high power factor.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V. In
Canada 120V, 277V, 347V; ships as 120V/347V.
6 Optional multi-volt electronic ballast (for compact
fluorescent) capable of operating any line voltage from
120V-277V.
7 Available for CF only. Not available with MVOLT.
8 Not available with multi-tap ballast.
9 Lamp not included.
10 Quartz lamp wattage not to exceed ballast wattage
rating; not available with compact fluorescent..
11 Black finish only.

www.lithonia.com
keyword: TWA

Architectural Colors (optional)
DNA
Natural aluminum
DBL
Black
DMB
Medium bronze
DWH
White
DSS
Sandstone
Accessories

(Order separately)

RK1 PEB1 Photoelectric control kit,
RK1 PEB1 CSA Photoelectric control kit,
RK1 PEB2 Photoelectric control kit,
240V, 277V
RK1 PEB3 CSA Photoelectric control kit,
TWAWG Wireguard

120V
120V
208V,
347V

Lamp/Fixture/Ballast Data
Lamp Base
Wattage Ballast
Type
Type
High Pressure Sodium (med/clear)
35
RNPF
E17
medium
50
RNPF
E17
medium
70
RNPF
E17
medium
100
RNPF
E17
medium
Metal Halide (med(70/100/150)/mog(175)/clear)
50
HX-HPF
E17
medium
70
HX-HPF
E17
medium
100 HX-HPF
E17
medium
Fluorescent (double twin-tube/triple-tube)
22DTT Mag NPF
T4
GX32D-2
26DTT Elec HPF
T4
GX32D-3
28DTT Mag NPF
T4
GX32D-3
32TRT Elec HPF
T4
GX24Q-3
42TRT Elec HPF
T4
GX24Q-3

Building Mounted

Cutoff Mini Wall-Paks, Polycarbonate Refractor
Intended Use
For entrances, stairwells, corridors and
other pedestrian areas.
Features
Housing – Rear housing is rugged, diecast aluminum. Front cover is one-piece,
UV-resistant, injection-molded polycarbonate, internally painted. Captive external hardware is treated for corrosion resistance and included slotted hex-head
and tamper-proof fasteners.Finish is dark
bronze (DDB) corrosion-resistant polyester powder.
Optics – One-piece, die-formed reflector
is diffused aluminum. Refractor is clear
polycarbonate, providing IES cutoff distribution and maximum lateral light output. Standard finish is dark bronze polyester enamel. Front cover is sealed and
gasketed to inhibit the entrance of outside contaminants.
Electrical – MH: high-reactance, highpower factor standard. HPS: Reactor normal power factor standard. HPF available.

TWAC

UL listed. Electrical components mounted
to cast-aluminum housing for maximum
heat-dissipation. Fluorescent ballasts are
magnetic NPF (22 & 28 DTT) or electronic
HPF (26 DTT & TRT). Encased and potted
solid-state ignitors (HPS). Components are
heat-sinked directly to cast housing for
maximum heat-dissipation. (For 50 hertz
availability, consult factory.)
Installation – Top ½" threaded wiring access. Back access through ¾" opening.
For feed-thru wiring, use condulet tee
(not included). Mount on any flat, noncombustible vertical surface.
Socket – H.I.D. is porcelain, horizontally oriented, medium-base socket with copper alloy, nickel-plated screw shell and center
contact. Photocells are field-installable. UL
listed 660W, 600V and 4KV pulse rated. Fluorescent is two-pin (DTT) or four-pin (TRT),
positive latching thermoplastic.
Listings – UL Listed (standard). CSA or
NOM Certified (see Options). UL listed for
wet locations. IP65 rated in accordance
with IEC standard 529.

Contour ®

Ordering Information
Designation
High Pressure Sodium
TWAC
35S 1
TWAC
50S 2
TWAC
70S 3
TWAC
100S3
Metal Halide
TWAC
50M
TWAC
70M
TWAC
100M
Compact
TWAC
TWAC
TWAC
TWAC
TWAC

Example: TWAC 100S 120 LPI
Voltage
120
2084
2404
277
347
TB 5
MVOLT 6

Fluorescent
22DTT (2-pin)
26DTT (4-pin)
28DTT (2-pin)
32TRT (4-pin)
42TRT (4-pin)

Lamp/Fixture/Ballast Data
Lamp Base
Wattage Ballast
Type
Type
High Pressure Sodium (med/clear)
35
RNPF
E17
medium
50
RNPF
E17
medium
70
RNPF
E17
medium
100
RNPF
E17
medium
Metal Halide (med(70/100/150)/mog(175)/clear)
50
HX-HPF
E17
medium
70
HX-HPF
E17
medium
100 HX-HPF
E17
medium
Fluorescent (double twin-tube/triple-tube)
22DTT Mag NPF
T4
GX32D-2
26DTT Elec HPF
T4
GX32D-3
28DTT Mag NPF
T4
GX32D-3
32TRT Elec HPF
T4
GX24Q-3
42TRT Elec HPF
T4
GX24Q-3

Options/Accessories
Installed
SF
DF
XHP
EC
QRS
CR
CRT
CSA
NOM
PE
LPI
L/LP
DC12
2DC12

Single fuse (120V, 277V, 347V)7
Double fuse (208V, 240V)7
High power factor ballast
Emergency circuit8,9
Quartz restrike system8,9
Enhanced corrosion resistance
Non-stick protective coating
(rear housing)10
CSA Certified
NOM Certified (consult factory)
Photocell (button type)7
Lamp included as standard
Less lamp
Emergency circuit 12V. 35W lamp
included11
Emergency circuit 12V. 2/35W lamps
included11

NOTES:
1 120V only.
2 120V or 277V only.
3 120 R-NPF is standard, 208/240/277/347 and TB are high
reactance high power factor.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
6 Optional multi-volt electronic ballast (for CF) capable of
operating any line voltage from 120V-277V.
7 Not available with multi-tap ballast.
8 Lamp not included.
9 Quartz lamp wattage not to exceed ballast wattage rating.
10 Black finish only.
11 H.I.D. only. Not available with QRS, ES, or NOM.

www.lithonia.com
keyword: TWAC

Architectural Colors (optional)
DNA
Natural aluminum
DBL
Black
DMB
Medium bronze
DWH
White
DSS
Sandstone

Accessories

(Order separately)

RK1 PEB1 Photoelectric control
kit, 120V
RK1 PEB1 CSA Photoelectric control
kit, 120V
RK1 PEB2 Photoelectric control
kit, 208V, 240V or 277V
RK1 PEB3 CSA Photoelectric control
kit, 347V
TWAWG Wireguard

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Height
Width
Depth
Weight

TWAC
10 (25.4)
111/2 (29.2)
815/16 (22.7)
10 lbs (4.53 kg)

Outdoor / PSG8

477

Building Mounted

Cast Micro Wall-Paks, Polycarbonate Refractor

TWL

Intended Use
Use for entrances, stairwells, corridors,
other pedestrian areas.
Features
Housing – Normal Power Factor (NPF)
backplate is heavy-gauge steel. High
Power Factor (HPF) housing is heavy-duty
cast aluminum, finished in dark bronze.
Electrical components are mounted to
backplate (NPF) or cast housing (HPF) for
maximum heat-dissipation. Stainless
steel external hardware includes slotted
hex-head and tamperproof fasteners.
Finish is dark bronze (DDB) corrosion-resistant polyester powder.
Optics – Front cover/refractor is injectionmolded, one-piece, UV-stabilized polycarbonate. Optical system is sealed and gasketed to inhibit entrance of outside contaminants. Standard finish is dark bronze (DDB)

Ordering Information

Example: TWL 50S 120 SF LPI

Designation

Accessories

(Order separately)

RK1 PEB1 Photoelectric control kit, 120V
RK1 PEB2 Photoelectric control kit, 208V,
240V, 277V
RK1 PEB3 CSA Photoelectric control kit, 347V
RK1 PEB1 CSA Photoelectric control kit, 120V
TWLMB Cast aluminum mounting box
TWLWG Wireguard 9
TWLEP1 Extension collar 11/2" deep10
TWLEP2 Extension collar 21/8" deep10

Voltage
120
2083,4
2403,4
2773
3473
TB3,5
MVOLT 6

High Pressure Sodium
TWL 35S1
TWL 50S
TWL 70S
Fluorescent
TWL 7TT 1
TWL 9TT 1
TWL 13TT 1
TWL 13DTT 1
TWL 22DTT 1
TWL 26DTT
TWL 28DTT 1
TWL 26TRT
TWL 32TRT
TWL 42TRT

(2-pin)
(2-pin)
(2-pin)
(2-pin)
(2-pin)
(4-pin)
(2-pin)
(4-pin)
(4-pin)
(4-pin)

NOTES:
1 120V only.
2 120V only, A19 lamp.
3 Requires cast HPF back housing.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
6 Optional multi-volt electric ballast (for compact
fluorescent) capable of operating on any line voltage
from 120V-277V.
7 Not available with multi-tap ballast.
8 HPS only. Not available in 35S.
9 Order TWAWG with TWLMB, EP or HPF.
10 120V NPF units only.

Dimensions are shown in inches (centimeters) unless
otherwise noted.

HPF (RNP, XHP)

478

Outdoor / PSG8

Height
Width
Depth
Weight

TWL
120V NPF
101/2 (26.7)
63/4 (17.2)
37/8 (9.8)
4 lbs (1.8 kg)

Options
Installed
SF Single fuse (120V, 277V)7
PE Photoelectric cell (button type)7
LPI Lamp included as standard
L/LP Less lamp
RHP Reactor high power factor ballast
(HPS and 120V only)
XHP High reactance high power factor
ballast (208V, 240V, 277V, 347V, and TB)8
CSA CSA Certified
NOM NOM Certified (consult factory)
Architectural Colors (optional)
DNA Natural aluminum
DBL Black
DMB Medium bronze
DWH White
DSS Sandstone

Incandescent
TWL I 2

120V NPF

corrosion-resistant polyester enamel.
Electrical – 120V reactor normal (RNP) or
high-power factor (RHP) or high-reactance, high power factor (XHP). 100%
copper wound and factory tested. TRT
ballasts are HPF electronic, UL listed.
Installation – NPF unit mounts to standard J-box. Surface conduit mount requires extension collar accessory. HPF
units may be mounted flush to wall or horizontally facing down. HPF units have ¾"
threaded hub for wiring access. Closedcell gasketing seals junction.
Socket – HPS: Medium-base porcelain
socket, vertically oriented with copper alloy nickel-plated screw shell and center
contact. UL listed 660W, 600V. Compact
fluorescent socket.
Listings – UL Listed (standard). CSA or
NOM Certified (see Options). UL listed for
wet locations. IP65 rated in accordance
with IEC standard 529.

TWL
HPF
103/4 (27.3)
71/8 (18.1)
711/16 (19.5)
8 lbs (3.6 kg)

www.lithonia.com
keyword: TWL

Lamp/Fixture/Ballast Data
Lamp
Base
Wattage Ballast
Type
Type
High Pressure Sodium (med/clear)
35
RNP
E17
medium
35
HPF
E17
medium
50
RMP
E17
medium
50
HPF
E17
medium
70
RNP
E17
medium
70
HPF
E17
medium
Fluorescent (twin-tube)
7
RNP
T4
G23
9
RNP
T4
G23
13
RNP
T4
GX23
Fluorescent (double twin-tube)
13
RNP
T4
GX23
22
RNP
T4
GX32D-2
28
RNP
T4
GX32D-3
Fluorescent (triple-tube)
32
HPF
T4
GX24Q-3
42
HPF
T4
GX24Q-4

Building Mounted

Mini Wall-Paks, Polycarbonate Refractor
Intended Use
For security lighting that requires vandal
resistance and a variety of wall-mounting
options.
Features

TWM

Electrical – 120V reactor, normal power
factor ballast. Ballast is copper wound and
100% factory tested.
Listings – UL Listed to US and Canadian
safety standards. UL/C-UL listed for wet locations. (UL tested at 250 C maximum ambient temperature).

Housing – Rear housing is rugged, diecast aluminum. One-piece gasket inhibits
the entrance of external contaminants.
Bronze polyester powder finish standard.
Installation – Housing is configured for
mounting directly over a standard 4" outlet
box or for surface wiring via two convenient ½" threaded conduit entry hubs.
Optics – Refractor is one piece prismatic
polycarbonate designed for uniform area
illumination. Reflector is die-formed anodized aluminum. Medium-base lamp included in carton as standard.

Ordering Information

Designation
High Pressure Sodium
TWM
50S
TWM
70S
TWM
100S

Example: TWM 50S 120 LPI

Voltage
120

Options
LPI Lamp included as
standard

D
W

H
Dimensions are shown in inches (centimeters) unless
otherwise noted.
Height
Width
Depth
Max weight

TWM
81/2 (21.59)
81/2 (21.59)
6 (15.24)
7 lbs (3.17 kg)

www.lithonia.com
keyword: TWM

Outdoor / PSG8

479

Building Mounted

WG/WP

Globe/Cylinder Wall-Paks, Glass/Polycarbonate
Intended Use
For entrances in motels, condominiums
and other pedestrian areas.
Features

nickel-plated screw shell and center
contact. UL listed 660W, 600V. Fluorescent 2-pin socket: 22DTT-GX32D-2,
28DTT-GX32D-3.
Listings – UL Listed. UL Listed for wet
locations.

Housing – Die-cast aluminum housing
with electrostatically applied dark bronze
polyester powder finish. White finish
available.
Optics – Opal glass or white polycarbonate available.
Electrical – HPS-120V reactor normal
power factor (RNP). 100% copper wound
and factory tested. H.I.D. is UL 1029 listed.
Fluorescent is UL 935 listed, electromagnetic.
Installation – Wall and ceiling mounted.
Socket – Medium-base porcelain socket,
vertically oriented with copper alloy,

Ordering Information

Example: WGCW 70S 120 LPI

Voltage

Designation
High Pressure Sodium
WPCW
WPCW
WGCW
WPGW
WPGW
WGGW

35S
50S
70S
35S
50S
70S

120

White
White
White
White
White
White

polycarbonate, cylinder/wall
polycarbonate, cylinder/wall
glass, cylinder/wall
polycarbonate, globe/wall
polycarbonate, globe/wall
glass, globe/wall

White
White
White
White
White
White
White

glass, cylinder/wall
glass, globe/wall
glass, cylinder/ceiling
glass, globe/ceiling
polycarbonate, cylinder/wall
polycarbonate, globe/wall
polycarbonate, cylinder/ceiling

Options
(blank) Dark bronze finish
standard
DWH White finish
LPI Lamp included as
standard 1

Incandescent
WGCW
WGGW
WGCC
WGGC
WPCW
WPGW
WPCC

100I
100I
60I
60I
60I
60I
60I

Fluorescent
WPCW
WPCW
WPGW

22DTT (2-pin), white polycarbonate,
cylinder/wall
28DTT (2-pin), white polycarbonate,
cylinder/wall
28DTT (2-pin), white polycarbonate,
globe/wall

NOTES:
1 Not included with incandescent fixtures.

Lamp/Fixture/Ballast Data
Lamp
Base
Wattage Ballast
Type
Type
High Pressure Sodium (Med/Clear)
35
RNP
E17
medium
50
RNP
E17
medium
70
RNP
E17
medium
Fluorescent (Double Twin-Tube)
22
RNP
T4
GX32D-2
28
RNP
T4
GX32D-3

480

Outdoor / PSG8

www.lithonia.com
keyword: WG-WP

Garage Lighting, Surface-Mount
Intended Use
For parking garage applications.
Features
Housing – Rugged, die-cast aluminum with
one-piece silicone gasketing. Standard
finish is white corrosion-resistant polyester powder paint. Other architectural colors available.
Lens – Precision injection-molded, UV stabilized, acrylic lens. Hinged and secured
with four stainless steel screws. Polycarbonate lens available.
Mounting – Fully silicone gasketed, galvanized steel plate. Surface mounts to recessed box or pendant mounts to industry
standard J-boxes. The quick-mounting
bracket doubles as a hanger for the fixture
allowing for trouble-free electrical connections. The fixture twist-locks into place
in a firm, secure fashion.

Ordering Information

Designation
High Pressure Sodium
PGR 70S
PGR 100S
PGR 150S
Metal Halide
PGR 100M
PGR 150M
PGR 175M
PGR 200M 1

Optics – Lower segmented, anodized
aluminum reflector and upper-precision, injection-molded, prismatic acrylic refractor.
Polycarbonate refractor available.
Electrical – High-reactance, high-power
factor or constant-wattage autotransformer. Ballast is copper wound and 100%
factory tested. 180°C Class H insulation
system. Medium based, UL listed 660W,
600V, 4KV socket.
Listings – US patent no. D402,075. Canadian patent 86779.UL Listed (standard).
CSA Certified or NOM Certified (see Options). UL listed for 25°C ambient operation
and wet locations.

Parking Garage

PGR

Example: PGR 150S 120 SF

Voltage

Options/Accessories

120
2082
2402
277
347
4803
TB 4

Options (shipped installed)
SF Single fuse (120V, 277V, 347V)5
DF Double fuse (208V, 240V, 480V)5
EC Emergency circuit (100W max. 120V)6,7
QRS Quartz restrike system (100W max.
120V)6
QRSTD Quartz restrike system time delay
(100W max. 120V)6,8
CR Enhanced corrosion resistance
CRT Non-stick protective coating9
KW1 KiloWatch® 120V control relay10,11
HA 40°C ambient (not available with EC
option or 200M ordered with 480V
together)
TP Tamperproof lens screws
PC Polycarbonate refractor/lens
LP Lamp factory installed (N/A with TB)
DN Downlight focused
SCWA Super CWA pulse start ballast (n/a
HPS or 100M)
CSA CSA Certified
NOM NOM Certified (consult factory)

NOTES:
1 Must be ordered with SCWA.
2 In Canada, available in 175W metal halide only.
3 Available in 175M, 200M and 150S only.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In
Canada 120V, 277V, 347V; ships as 120V/347V.
5 Not available with multi-tap ballast.
6 Lamp not included.
7 Not available with HA option.
8 Not available with KiloWatch®.
9 Black finish only.
10 For specific ordering information, refer to the
KiloWatch brochure or consult factory.
11 Consult factory for availability in Canada.
12 Required when pendant is free-swinging.

Shipped separately
OJB Offset junction box12
YK Yoke mount
BDS Bird deterrent shroud
For optional Architectural Colors, see page 485.

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Height
Width
Max weight

PGR
111/2 (29.2)
15 (38.1)
20 lbs (9 kg)

www.lithonia.com
keyword: PGR

Outdoor / PSG8

481

Parking Garage

KPS

Garage Lighting, Ceiling-Mount
Intended Use
For parking garage applications.
Features
Housing – Rugged, heavy-gauge, aluminum housing. Square shape, continuous
welded seams for weather-tight integrity.
Extruded-aluminum door frame has an impact-resistant, tempered glass lens. Door
frame is sealed to housing by EPDM
closed-cell gasket. Direct mounting to
recessed J-box is standard; yoke or recessed mountings optional. Housing will
accommodate both top and side branchcircuit wiring and has internal splice compartment. Dark bronze (DDB) corrosionresistant polyester powder finish standard; other architectural colors available.
Stainless steel housing also available.
Optics – Reflectors are anodized, hydroformed aluminum. Four cutoff distributions

available: Type II (Roadway), Type III (Asymmetric), Type IV (Forward Throw) and Type
V (Symmetric). Type V reflector is vertically
lamped, all others horizontally lamped. Reflectors are field-interchangeable and
hinge out for easy removal during installation/maintenance.
Electrical – All ballasts are copper wound
and 100% factory tested. Electrical components are unitized on removable power
module. Positive-locking, quick-disconnect
on primary and secondary circuits. Mediumbase porcelain socket standard. Mogulbase porcelain socket for 175W metal halide. 4KV pulse rated.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL listed for damp locations. SS option: UL listed
for 25°C ambient and damp location. RMG
option: UL listed for recessed mounting,
wet locations and covered ceilings only.

Ordering Information

Designation
High Pressure Sodium
KPS
50S
KPS
70S
KPS
100S
KPS
150S
Metal Halide
KPS
100M
KPS
150M
KPS
175M

Example: KPS 150S R2 120 EC

Distribution
R2
R3
R4
R5

Voltage

Options/Accessories

120
208 1
240 1
277
347
480 1
TB 2

Options (shipped installed)
SF
Single fuse (120V, 277V, 347V)
DF
Double fuse (208V, 240V, 480V)
QRS
Quartz restrike system (100W
max., 120V lamp not included)
EC
Emergency circuit (100W
max., 120V lamp not included)
MOG
Mogul-base socket
CR
Enhanced corrosion
resistance
NB
Natural brushed
(SS option only)
HS
House-side shield
(R3/R4 only)
YK
Yoke mount
SS
Stainless steel housing3
RMG
Recessed mount 2" x 2"
(grid ceiling)3
WL
Wet location
SCWA
Super CWA pulse start
ballast, requires R5 distribution, (n/a HPS or 100M)
CSA
CSA Certified
NOM
NOM Certified (consult
factory)

Type II
Roadway
Type III
Asym
Type IV FT
Type V
Sym.

For optional Architectural Colors, see page 485.
Dimensions are shown in inches (centimeters) unless
otherwise noted.
Length
Width
Depth
Max weight

482

Outdoor / PSG8

KPS
163/4 (42.6)
163/4 (42.6)
101/2 (26.7)
36 lbs (16 kg)

www.lithonia.com
keyword: KPS

Accessories (shipped separately)
VG
Vandal guard

NOTES:
1 Consult factory for availability in Canada.
2 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
3 SS and RMG cannot be ordered together.

Die-Cast, Cutoff Flat Lens/Drop Lens
Intended Use
For parking garages, convenience stores,
hotels and walkways.
Features
Housing – Rugged, die-cast, soft-corner
aluminum housing with 0.12" nominal wall
thickness. Die-cast aluminum door frame
has prismatic, impact-resistant, tempered
glass; drop dish acrylic lens or drop dish
polycarbonate lens. Door frame is fully
gasketed with one-piece tubular silicone.
Surface mounted utilizing four 0.5" mounting holes and one 0.875 wire-entry hole
(mounting hardware not included). Dark
bronze (DDB) corrosion-resistant polyester powder finish is standard. Other architectural colors available.
Optics – Reflector is optical-quality aluminum that works in tandem with a lightdiffusing prismatic lens.

Designation

Contour

®

Optional white finish shown.
Standard finish is dark bronze.

Example: KACM 400M FP 120

Distribution
FP
DPA
DPP

KACM

Electrical – Ballast is high-reactance, highpower factor (150W) or high-power factor,
constant-wattage autotransformer (175400W MH & HPS).
Socket – Mogul-base porcelain socket,
4KV pulse rated. Position-oriented socket
standard on all metal halide units.
Listings – UL Listed (standard). CSA Certified or NOM Certified (see Options). UL
listed for wet locations. For covered ceiling, mount on concrete, steel or aluminum. Not for use in dwellings. UL listed
for 25o C ambient temperature.

Ordering Information

High Pressure Sodium
KACM 150S
KACM 250S
KACM 400S
Metal Halide
KACM 150M
KACM 175M
KACM 200M 1
KACM 250M
KACM 320M 1
KACM 350M 1
KACM 400M

Canopy Lighting

Voltage

Flat prismatic lens (C73T)
Drop prismatic lens (Acrylic)
Drop prismatic lens (Polycarbonate)

120
2082
2402
277
347
4802
TB 3

Mounting
YK

Yoke

Options/Accessories
SF
DF
QRS
EC
YK
TC
SCWA
CSA
NOM

Single fuse (120V, 277V, 347V) n/a TB
Double fuse (208V, 240V, 480V) n/a TB
Quartz restrike system (250W max,
120V lamp not included)
Emergency circuit (lamp not
included, 250W max.)
Yoke mount
Thru-wire condulet tee capability
Super CWA pulse start ballast
(n/a HPS or 175M)
CSA Certified
NOM Certified (consult factory)

Shipped separately4
KACVG Vandal guard5
KACWG Wire guard

NOTES:
1 Must be ordered with SCWA.
2 Consult factory for availability in Canada.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
4 May be ordered as an accessory.
5 FP lens only.

Dimensions are shown in inches (centimeters) unless
otherwise noted.
Length
Width
Depth
Max weight

KACM
171/2 (44.5)
171/2 (44.5)
FP option 71/8 (18.1)
DP option 111/8 (28.3)
40 lbs (18.1 kg)

www.lithonia.com
keyword: KACM

Outdoor / PSG8

483

Electrical Options

Options and Accessories
C22
C42
C62
CV3P

12-3 SEO cord (2' prewired)*
14-3 SEO cord (2' prewired)*
16-3 SEO cord (2' prewired)*
3 ft. of 16-3 SEO cord pre-wired w/3 prong
plug for use with prewired cages and
crossarms. Must use matching receptacle,
provided by others. Not available with
1500W-120V.
DC12 Auxiliary emergency circuit for MR11 35
watt maximum double contact bayonet
based lamp, contains socket with leads for
use with separate external 12 volt emergency power source (provided by others).
Factory installed only. Lamp included and
installed at factory (MR11 DC Bayonet base)
2DC12 Auxiliary emergency circuit for MR11 35
watt maximum double contact bayonet
based lamp, contains socket with leads
for use with separate external 12 volt
emergency power source (provided by
others). Factory installed only. Two lamps
included and installed at factory (MR11 DC
bayonet base).

PE3 NEMA twist-lock photocontrol. 347V.
Shipped separately.
PE4 NEMA twist-lock photocontrol. 480V.
Shipped separately.
PE7 NEMA twist-lock photocontrol. 277V.
Shipped separately.
SC Shorting cap for PER. Ships as SC U.
QRS Quartz restrike system. Activates when
power interruption causes H.I.D. lamps
to drop out. Deactivates when fixture restrikes. QRS does not energize during cold
start of fixture. Wattage of quartz lamp
should not exceed that of H.I.D. source.
For 100W and below, use 100W DC bayonet-base lamp.
QRSTD Quartz restrike time delay. Functions as
does QRS, but quartz lamp energizes under hot and cold starting conditions.
Quartz lamp will come on when luminaire
is energized and remain on for two minutes after restrike.
SF Single fuse. Use with 120V, 277V, 347V. Not
available for multi-tap ballast. In-line, timedelay type fusing isolates faulty luminaire
from circuit fusing.

DF

Double Fuse. Use with 208V, 240V, 480V. Not
available for Multi-tap ballast. In-line, timedelay type fusing isolates faulty luminaire
from circuit fusing.
EC Emergency circuit. Lamp not included.
ELDW Integral emergency battery system for
compact fluorescent units.
FG Festoon outlet. Duplex ground fault receptacle. Cast box.
KW1 KiloWatch 120V control relay.
KW4 KiloWatch 277V control relay.
LS Lamp support. Mogul-base socket only.
MR1 Outdoor non-encapsulated remote ballast.
MR6 Indoor epoxy-encapsulated remote ballast.
PE Photoelectric cell. (Button-type) Not available for multi-tap ballast or 480V.
PER NEMA twist-lock photocontrol receptacle.
Photocontrol not included. Shipped installed.
PE1 NEMA twist-lock photocontrol. 120V, 208V,
240V. Shipped separately.

* Other cord lengths available. Consult factory.

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately
C22

C42

C62

CV3P

KSE
KSF
KAD
KAC
KVE
KVR
KVS
KAR
KKS
KKR
KQS
Aeris
KVF

Area Lighting
DF
■
■
■
■
■
■
■
■
■
■
■
■
■

EC
■
■
■
■
■
■
■
■
■
■
■
■
■

FG

KW1

KW4

LS
■1
■2

MR1

MR6

PE

■3
■
■3
■4

■
■

■

PER
■
■
■
■
■
■
■
■
■
■
■
■
■

QRS
■
■
■
■
■
■
■
■
■
■
■
■
■

QRSTD

■

SF
■
■
■
■
■
■
■
■
■
■
■
■
■

PER

QRS

QRSTD

SF

■
■
■

■6
■
■
■

■
■
■

■
■
■

Floodlighting
C22
KFL
TFA
TFR
TFL
TFM
55
95
170S

■
■
■
■

C42

C62

■
■
■
■

CV3P

■
■
■
■

DF

EC

■
■
■
■
■5
■
■
■

■6
■
■
■

FG

KW1

KW4

LS

MR1

MR6

PE

❑

❑

■

■7
■
■
■

■
■
■

❑
❑

NOTES:
1
2
3
4
5
6
7

KSE2 only
KSF2/3 only
KVE/KVS size 3 only
KAR2 only
Not available in TA distribution
KFL3 only
Standard on 1000W TA & RN distributions

484

Outdoor / PSG8

www.lithonia.com

■

■
■
■
■
■7
■
■
■

Electrical Options
■

= Available as an option, shipped installed

C22

C42

C62

Options and Accessories

Building-Mounted

CV3P 2DC12

TWH
TWP
TWA
TWAC
TWL
WFL
WSR
WST

DC12

■

■

■
■

DF

EC

■
■
■
■
■
■
■
■

■
■
■
■

ELDW

FG

KW1

KW4

LS

MR1

MR6

■

■1
■
■

■
■

PE

PER

QRS

QRSTD

SF

■
■
■
■
■
■
■
■

■

■
■
■
■

■
■

■
■
■
■
■
■
■
■

■2
■
■

Site Lighting
C22

C42

C62

CV3P

DF

EC

FG

KW1

KW4

LS

MR1

MR6

PE

PER

QRS

QRSTD

SF

KBA
KBC
KBD

■
■
■

■
■
■

■
■
■

KBE
KBR
KBS
KL

■
■
■
■

■
■
■

■
■
■
■

■

■3

■

Garage Lighting
C22

C42

C62

CV3P

PGR
KPS
KACM

DF

EC

■
■
■

■
■
■

FG

KW1
■
■4

KW4

LS

MR1

MR6

PE

PER

QRS

QRSTD

SF

■
■
■

■
■

■
■
■

PER

QRS

QRSTD

SF

■

■
■

■4

Sportslighting
TSP
TV

C22

C42

C62

CV3P

DF

EC

■
■

■
■

■
■

■
■

■
■

■
■

FG

KW1

KW4

LS

MR1

MR6

PE

■

■
■

For electrical system compability (SCWA, CWA, CWI, XHP, RHP, RNP) please see indvidual product specification sheet or specific page in this catalog.

NOTES:
1
2
3
4

Size 3 only
Size 3 only N/A 480V
BBW only
R5 distribution only

Architectural Colors
Powder finish. Add designation as suffix to
catalog number, KL series available in
DDB, DNA, DBL and DWH only. Additional
architectural colors are available. See
Architectural Colors brochure on
www.lithonia.com.

Standard Colors
DDB Dark bronze (standard)
DBL Black
DWH White
Classic Colors
DMB Medium bronze
DNA Natural aluminum
DGC Charcoal gray*
DSS Sandstone
DSB Steel blue*
DTG Tennis green*
DBR Bright red*
* Not available with TWP, TWA, TWAC or TWL.

www.lithonia.com

Fixture Finishes
ADB Anodized dark bronze. Architectural Class
1. Round housing only for KAR2, KKR, KQR
and certain 8" KB bollards. Add as suffix to
catalog number.
CR Clear polyester coating for additional protection against some corrosive atmospheres. Consult factory for corrosive compatibility. Not available on KL.

Outdoor / PSG8

485

Options and Accessories

Area Lighting

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately
AS KSE KSF KAD KAC KVE KVR KVS KAR KKS KKR KQS KVF
o

o

DA12P

Degree mounting arm. 30 max. uptilt in 5
increments. Single or twin 180o config. for KVS.

❑

❑

❑

DA12WB

Degree arm for wall. 30o max. uptilt in 5o
incr. Single or twin 180o config. for KVS.

❑

❑

❑

DAD12P

Degree mounting arm. 30o max. uptilt, 5o incr.
o

o

DAD12WB Degree arm for wood pole or wall. 30 max. uptilt, 5 incr.

❑

❑

❑

❑

❑
❑

HS

House-side shield (consult factory for specifics)

■

❑

❑

❑

■

■

■

■

❑

KMA

Mast arm mounting for area lighting. 6" min. arm
length. Use for 23/8" OD pipe.

❑

❑

❑

❑

❑

❑1

❑

❑

KTMB

Twin mounting bar square mounting arms.
Mounts on T25 (27/8" OD tenon by 5” tall minimum).

❑

❑

❑

❑

❑

❑

❑

MA

Master arm for single/twin 180o configuration,
internal fitter (Size 3 only).

MB

Mounting bracket. Use size 1 housing with KSF, KSE.

PT4

Post-top round pole only (4" OD open-top pole).

■

■

■

PT45

Post-top round pole only (41/2" OD open-top pole).

■

■

■

PT5

Post-top. Must use with round pole only for KVR.
(5" OD open-top pole)

■

■

■

PT6

Post-top. Must use with round pole only for KVR.
(6" OD open-top pole)

■

■

RPx

Round pole mounting arm.

■

■

RPF

Round pole fitter.

RPF20

Round pole fitter (23/8" OD tenon).

❑

❑

RPF25

Round pole fitter (27/8" OD tenon).

❑

❑

■
❑

■

■

❑

■

■

■

■

■

■
■

For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog.
NOTES:
1 Size one housing only.

MB

KMA

DA12P

KTMB

6"

DAD12P

14"

Tenon Slipfitters for Arm-Mounted Luminaires

Slipfitter
RP09

Use with all arm-mounted luminaires. When ordered, fixture must include round pole
arm (RPx ) or pole degree aiming arm (DA12P or DAD12P). To order, locate catalog
number from chart below based on tenon size and mounting configuration. Example:
For 3 fixtures at 120°, using a 2-7/8" tenon, catalog number is T 25-320. Shipped
separately. Order as separate catalog numbers. For Aeris fixture specify AS.
Example: AS T20-190.
Tenon
OD

1 fixture

2 fixtures
at 180°

2 fixtures
at 90°

3 fixtures
at 120°

3 fixtures
at 190°

4 fixtures
at 90°

2-3/8"
2-7/8"
4"

T 20-190
T 25-190
T 35-190

T 20-280
T 25-280
T 35-280

T 20-290*
T 25-290*
T 35-290*

T 20-320*
T 25-320*
T 35-320

T 20-390*
T 25-390*
T 35-390*

T 20-490*
T 25-490*
T 35-490*

Outdoor / PSG8

Tenon Slipfitter
for KK Series

7-3/4"

Set

* RP09 must be used with KSF, KVS, KT or KSE.

486

HS – KAD

www.lithonia.com

Tenon

HS – KSF

Area Lighting

Options and Accessories

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately
AS KSE
SM
SP__
SPF
SPF20
SPF25
T20
T25
VG3
WB x
WM
WW x

Side mount assembly. One per luminaire.
Square pole mounting arm. Use 9" arm for two at 90o.
Square pole fitter.
Square pole fitter (23/8" OD tenon).
Square pole fitter (27/8" OD tenon).
Tenon slipfitter (for 2" pipe tenon 23/8" OD).
Tenon slipfitter (for 21/2" pipe tenon 27/8" OD).
Vandal guard.
Wall mount for J-box. (Aeris only order WBA).
Wall mount. 16" arm is used with a wall plate.
Wood pole or wall for conduit stub 9" or 12".

■

■

KSF
■

KAD KAC
■

■

KVE KVR KVS KAR
■

■

■

■

KKS KKR KQS KVF
❑
❑
■
■

❑
❑
❑
■
■

❑
■

❑
■

❑
■

❑1
■

■

■

■

■

■

■

❑
❑

❑2

❑
■

■
❑
■

■

❑

■

■

For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog.

NOTES:

VG–KAD

SM/WM

1 Only available with FP option.
2 Only available in KVS1 (R2, R3 and R4).
3 Specify family as prefix when ordering
as a separate line item.

16"
(40.6cm)

7"
(17.8cm)
14"
(35.6cm)

SPx/RP x

WB x
Wall bracket size:
51/2" x 71/4"

Mounting bolts (4) by
others. Minimum
fastener size is 1/2"
diameter.

www.lithonia.com

Outdoor / PSG8

487

Options and Accessories

Site Lighting and Building-Mounted Lighting

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately

BBF
BBR
BBS
BBW
EP1
EP2
FS
PC
R6S/R8S
S6S/S8S
SCL
WG 1
VG 1
TWLMB
UT5
DFL
WLU
IBS
LC90

KBA KBC KBD KBE KBR KBS KL
■
■
■
■

Backbox for flat surfaces.
Backbox, recessed (ceiling, soffit mount).
Backbox for stud wall construction.
Backbox for surface wall installation.
Extension collar, 11/2" deep.
Order as TWLEP1.
Extension collar, 21/8" deep.
Order as TWLEP2.
Full shield for IES cutoff
Polycarbonate lens. Standard on KL.
Half-shield. Not for use with louvered bollards.
Half-shield. Not for use with louvered bollards.
Scribed Lens. Not available with louvered bollards.
Wireguard.
Vandal guard.
Mounting box, cast aluminum.
Uptilt 5 degrees
Diffusing lens
Wet location door for up orientation
Internal backlight shield
Lock at 90o for full cutoff

TWA/
TWH TWP TWAC TWL WFL WSR/WST

❑

❑

❑
❑

❑
❑

❑
❑

■
❑

■
❑

■
❑

■

■

■

■
❑
■

■
❑
■

■

■

■

❑
❑

❑

■

❑
■
❑

❑2
❑

❑
■
■
■
■

BBF

BBW

BBS

NOTES:
1 Specify family prefix.
2 Order TWAWG with TWLMB,
EP or HPF.

TWHVG

TWHWG

TWPWG

EP1

TWLMB

TWAWG

IBS

TWLWG

UT5

TO
WALL

5

488

Outdoor / PSG8

www.lithonia.com

Options and Accessories

Floodlighting, Garage Lighting and Sportslighting

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately
RMG
SS
AH
CF
FCRA
FCRA45
SLR
IBL

Recessed mount in grid ceiling.
Stainless steel ceiling mount housing (alloy 304 stainless steel).
Above horizontal aiming.
Charcoal filter. Must use with heavy-duty shroud.
Crossarm adapter for horizontal mounting. *
Crossarm adapter for horizontal mounting 45o. *
Stainless steel lens rings.
Internal bottom louver. Cannot order IBL and TVUV together.

FRWB
FSAB

Radius wall bracket. Standard finish is DDB.
Steel angle bracket. Standard finish is DDB.
Steel square pole bracket (for use with existing poles).
Standard finish is DDB.
Pipe/wood/pole/wall mounting bracket. Mounts to 2” schedule 40 pipe.
Wall/pipe bracket.
Tenon slipfitter. Fits 23/8” to 27/8” OD tenon.
Tenon slipfitter. Fits 23/8” to 27/8” OD tenon.
Tenon slipfitter. For 1/2” threaded knuckle. Fits 11/4”to 23/8” OD tenon.
Upper visor. Cannot be ordered with IBL.
2-light wood pole crossarm.
3-light wood pole crossarm.
4-light wood pole crossarm.
Wood crossarm mount bolt 5/8”- 11UNC, 8” length.
Yoke mount.
Integral slipfitter. Fits 27/8” max OD with TFA, 23/8” with TFL and TFR.

FSPB
FPMB
FWPB
FTS
TVTS
TFMTS
TVUV
FCX2
FCX3
FCX4
TVWC
YK
IS

PGR KPS KACM TSP
■
■
■
❑
■
❑

❑
❑

❑

TV

KFL

55

95

■
■
❑
❑
■
■

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑
❑

❑

❑

❑

❑

❑

❑

170S TFA TFR TFL TFM

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

■
❑
❑
❑
❑
❑
■

■

■

❑
❑
❑
❑
❑

❑
❑
❑

❑
❑
❑

❑
❑
❑

❑
❑
❑

❑
❑
❑

❑
❑
❑

❑
❑
❑

■

■

■

■

■
■

■
■

■
■

■

* Order as separate catalog number.
FRWB

FSPB

5/8" x 1" hex bolt and
lockwasher furnished

FPMB

RMG

9/16" DIA.

4-3/16"
(10.6cm)

3-3/4"

1/2" x 1-1/2"
hex bolt and
flat washer
furnished

13"

7"

12"

5/8" x 1" hex bolt
and lockwasher
furnished

FCRA

4"
(10.2cm)

41/2"
(11.4cm)

Pivot slot
for 1/2"
bolt

FCX3

Floodlight
yoke

Degree markings

Pivot hole for 5/8"
bolt (not provided)

FCX2

EPA
1.4 sq. ft.
Weight 20 lbs.

66"
(167.6cm)

3-3/8"
(8.6cm)

4-3/4"
(12.1cm)

Fits 2" or
2-1/2" pipe
(horizontal
or vertical)

(2) 3/8" U-bolts
furnished with
nuts and
washers

EPA
3.9 sq. ft.
Weight 56 lbs.

1-1/4"
(3.2cm)

FCX4

FCRA45
5/8" x 1" hex bolt and lockwasher furnished
1-1/4"
(3.2cm)
Pivot slot for 1/2"
bolt (not
provided)

8-11/16"
(22.1cm)

36"
(91.4cm)

FSAB

96"
(243.8cm)

EPA
4.8 sq. ft.
Weight 64 lbs.

11/16" diameter hole for
5/8" x 1-1/2" bolt, 5/8" thru-bolt
4"
lockwasher and
(10.2cm)
nut furnished
12-1/2"
(31.8cm)

Fixture
yoke

20-1/8"
(51.1cm)

TFMTS

4-1/2"
(11.4cm)
6"
(15.2cm)
Degree markings

FTS
3-1/4"
(8.3cm)

9/16" diameter holes
for lag bolts (not
provided)

Pivot hole for 5/8" bolt
(not provided)
Furnished with weathertight cord grip for 14-3
SO cord. (Grip for 12-3
SO optional).

5/8"
Clearance
Hole

FWPB
IS

Front view TFA

Front view TFL,TFR

5/8" x 1-1/2" bolt, lockwasher and nut furnished

18-5/8"
(47.3cm)

9/16"
(1.4cm)

4-7/8"
(12.4cm)

8-1/4"
(21cm)

Wire
Access
4"
(10.2cm)

7/16" (1.1cm)

www.lithonia.com

4-3/4"
(12.1cm)

Outdoor / PSG8

489

Options and Accessories

Floodlighting

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately
BD 2
BV 2
BVG 2
CV 2
EV 2
EY
FV2
GV 2
HLV2
VG1,2
UV
VLV
WG

KFL
❑
❑
❑

Barn doors
Bottom visor
Bubble vandal guard
Concentric visor
Eggcrate visor
Extended yoke
Full visor
Glare visor
Horizontal louver
Vandal guard. Order TFAVG for TFA.
Upper visor. Specify family designation.
Vertical louver
Wire guard

55

95

❑

❑

170S

TFA

TFR

TFL

TFM

❑

■
❑

■
❑

❑

❑
❑

❑
❑

❑
❑

❑
❑

❑

❑

❑

❑

❑
❑
❑

❑
❑

❑
❑

❑

❑

❑
❑
❑
❑

❑

NOTES:
1 Vandal gaurds are compatible with all wattages.
2 Specify family as prefix.

BD - BARN DOORS (KFL)

BV - BOTTOM VISOR (KFL)

HLV -HORIZONTAL LOUVER (KFL)

TFMVG/TFRVG

TFLFV

CV - CONCENTRIC VISOR (95)

TFAWG

TFLUV

Outdoor / PSG8

EV - EGGCRATE VISOR (KFL)

TFMUV/TFRUV

TFAUV

TFMWG/TFRWG

490

BV - BOTTOM VISOR (55/95)

WG - WIREGUARD

www.lithonia.com

FV - FULL VISOR (55/95)

GV -GLARE VISOR (55/95)

TFMFV/TFRFV

TFLVG

TFAVG

FV - FULL VISOR (KFL)

TFAFV

TFLWG

VLV - VERTICAL LOUVER (KFL)

BVG - VANDAL GUARD (KFL)

UV - UPPER VISOR (KFL)

UV - UPPER VISOR (55/95)

UV - UPPER VISOR (170)

Options and Accessories

Floodlighting

■ = Available as an option, shipped installed
❑ = Available as an accessory, shipped separately
AJB
EWB
KFLTMB
KFLTMBTHK
MP
KFLSTM
KFLSTMTHK
THK
TM
KFLWMA
KFLWMATHK
YK
STM

Architectural J-box.
Extended wall bracket, yoke mount only.
Twin mounting bar.
Twin mounting bar for THK option. Only compatible with KFLTHK.
Mounting plate. (For use with yoke-mount option on fixture).
Stanchion mount. Requires tenon slipfitter. (23/8" OD tenon)
Stanchion mount for THK option. (Use with THK mounting only or standard TFM).
Threaded knuckle mount.
Tenon base mount. Use with slipfitter options.
(23/8" OD teno
Wall mount arm. Requires IS, FTS or TFMTS.
Wall mount arm for THK option.
Yoke mounting bracket.
Stanchion mount. (23/8" OD tenon)

KFL
❑
❑
❑
❑
❑
❑
❑
■

55

95

170S

TFA

TFR

TFL TFM
❑
❑
❑
❑

❑

❑

❑

❑
❑

❑
❑

❑
❑

❑
❑

❑

❑
❑

❑
❑

❑
❑

❑1
❑
❑

❑

❑

❑

❑

❑

❑

❑

❑

❑
❑
■
❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

■
❑

NOTES:
1 When used with TFM yoke a 3/8" bolt, two lockwashers
and nuts must be furnished by others.

TM - TENON
BASE MOUNT

STM - STANCHION MOUNT

KFLSTM - STANCHION MOUNT
2 3/8"

wire
access
cover

AJB - ARCHITECTURAL
JUNCTION BOX

8"

2 3/8" OD

KFLSTMTHK - STANCHION
MOUNT FOR THREADED
KNUCKLE

21 5/8"

8"

MP - MOUNTING PLATE

EWB - EXTENDED
WALL BRACKET

YK - YOKE MOUNT

THK-THREADED
KNUCKLE MOUNT

KFLTMB - TWIN
MOUNTING BAR

KFLTMBTHK - TWIN
MOUNTING BAR FOR
THREADED KNUCKLE

KFLWMA - WALL-MOUNT

KFLWMATHK WALL-MOUNT ARM
FOR THREADED
KNUCKLE

www.lithonia.com

Outdoor / PSG8

491

Floodlighting Design Guidelines

IES Classifications
for general-purpose floodlighting
The IES beam spreads indicate the angular ranges
(horizontally and vertically) through which the intensity of the floodlight is greater than 10% of its
maximum intensity. This angular range is referred
to as the 'Field Angle'.
For example:
Asymmetrical beam spread
138° (H) x 119° (V)
HORIZONTAL

Setback
The recommended setback is three-fourths the
building height. If a building is 30 feet tall, the
recommended setback is 22.5 feet from the
building. Locating the floodlight closer to the
building will sacrifice uniformity; setting it farther
back will result in a loss of efficiency.
Setback distance = 3/4 x building height
3/ (30 ft.) = 22.5 ft.
4

Sign Lighting
When lighting a sign with ground-mounted floodlights, there are three considerations: setback,
spacing and aiming.

Sign Lighting
Considerations:
1. Setback
2. Spacing
3. Aiming

VERTICAL

= IES 7 X 6

Setback

IES Beamspread Classification
Field
Angle
Degrees

IES
Type

10° up to 18°
18° up to 29°
29° up to 46°
46° up to 70°
70° up to 100°
100° up to 130°
130° and up

1
2
3
4
5
6
7

Beam
Description
very narrow
narrow
medium narrow
medium
medium wide
wide
very wide

Spacing
The rule of thumb for spacing floodlights is not to
exceed two times the setback distance. If the
setback is 22.5 feet, the floodlights should not be
placed more than 45 feet apart.

When using ground-mounted floodlights to light
a sign, the recommended setback is a distance
equal to three-fourths the sign height. For
example, the setback distance for a 12-foot by 6foot sign would be 4.5 feet. Locating the floodlight
closer will sacrifice uniformity while setting it
farther back will result in a loss of efficiency.
Setback distance = 3/4 x sign height
3/ (6 ft.) = 4.5 ft.
4

12'

Spacing = 2 x setback distance
22.5 ft. x 2 = 45 ft. apart

6'

4'

2'

The IES classification was formerly referred to as
NEMA Type.
The following outdoor design tips provide general
guidelines for lighting design. These guidelines
may not apply to all applications.

GROUND-MOUNTED FLOODLIGHTS

Ground-mounted floodlights are used to light
building facades, signs and flagpoles.

Facade Lighting
When lighting building facades with groundmounted floodlights, three factors are considered:
setback, spacing and aiming.

4-1/2'

Aiming

Spacing

The floodlight should be aimed at least two-thirds
the height of the building. For example, if a building
is 30 feet high, the recommended aiming point is
approximately 20 feet high. After installation is complete, aiming can be adjusted to produce the best
appearance. Mounting a full or upper visor to the
floodlight can reduce unwanted spill light.

The rule of thumb for spacing floodlights is not to
exceed two times the setback distance. If the
setback is 4.5 feet, the floodlights should not be
placed more than 9 feet apart.

Aiming point = 2/3 x building height
2/ (30 ft.) = 20 ft. high
3

Facade Lighting
Considerations:
1. Setback
2. Spacing
3. Aiming

492

Outdoor / PSG8

www.lithonia.com

Spacing = 2 x setback distance
4.5 ft. x 2 = 9 ft. apart

Floodlighting Design Guidelines

Aiming

Spacing

Spacing

The floodlight should be aimed at least two-thirds
up the sign. For example, if a sign is six feet tall, then
the floodlight will be aimed approximately four feet
high. After installation is completed, aiming can be
adjusted to produce the best appearance. Mounting a full or upper visor to the floodlight can reduce
unwanted glare.

Ideally, three floodlights are recommended to light
a flag. The floodlights should be placed approximately 120° apart.

When more than one pole is added, pole placement is a concern. The “4 times“ rule of thumb for
spacing indicates that a pole should be placed four
times the mounting height from the adjacent poles.
If a flood is mounted on a 20-foot pole, space the
poles 80 feet apart.

3 floodlights spaced 120° apart

Pole spacing = 4 x mounting height
4 (20-ft. pole) = 80 feet between poles

Aiming point = 2/3 x sign height
2/ (6 ft.) = 4 ft. high
3

6'

40'

120°

40'

80'

120°

12'

160'

80'

120°

4'

20'

4-1/2'

Aiming

6'

2'
4-1/2'

The recommended aiming point for each floodlight is the center of the flag or the top of the pole.
Mounting a full or upper visor to the floodlight can
reduce unwanted spill light.

Flag Lighting
Ground-mounted floodlights also can be used to
light flags. Setback, spacing and aiming must all be
considered.

Vertical Aiming
A single floodlight uses the two-thirds rule of
thumb for vertical aiming. The fixture is aimed 2/3 of
the distance across the area to be lighted and at
least 30° below horizontal. If the area to be lighted
is 40 feet across, the recommended aiming point
is 27 feet.
Aiming point = 2/3 across distance to be lighted
2/ (40 ft.) = 27 ft. aiming point
3

Flag Lighting
Considerations:
1. Setback
2. Spacing
3. Aiming

POLE-MOUNTED FLOODLIGHTS
General Area Lighting

The recommended setback for lighting a flag is
one-third times the pole height. If the pole is 30 feet
tall, the floodlight should be set back a distance of
10 feet away from the pole.

Pole-mounted floodlights are commonly used for
general area lighting applications such as parking
lots and storage yards. Mounting height, spacing,
vertical aiming and horizontal aiming should be
considered.

General Lighting
Considerations:
1. Mtg. Height
2. Spacing
3. Vertical aiming
4. Horizontal aiming

Setback distance = 1/3 x pole height
1/ (30 ft.) = 10 ft.
3

Mounting Height
30'

10'

The recommended mounting height is one half the
distance across the area to be lighted. If the area
to be lighted is 40 feet across, the lowest recommended mounting height is 20 feet.

Horizontal Aiming
When an additional floodlight is added to a single
pole, horizontal aiming also must be considered.
First, each floodlight should be vertically aimed according to the two-thirds rule. As long as the floodlight has a horizontal NEMA 6 or 7 beamspread, the
floodlights can be aimed up to 90° apart.

E
LIN

20'

2 (20 ft. mtg. ht.) = 40 ft.

ING
AIM

Mounting height = 1/2 distance to be lighted
1/ (40ft.) = 20 ft.
2

Additionally, to minimize glare, the recommended
aiming point distance should never exceed twice
the mounting height. If a pole is 20 feet high, the vertical aiming point should not exceed 40 feet out.

AIM
ING
LIN
E

Setback

90°

AIMING
POINT

40'

www.lithonia.com

Outdoor / PSG8

493

General Information — Poles
(Poles are available only in U.S.)

Pole Selection Procedure

All luminaire/pole assemblies require proper evaluation to ensure that the structural integrity of the
assembly is not compromised when applied in specific wind conditions. Therefore, the basis for pole
selection in this catalog is total weight and effective
projected area, EPA (ft2), shown on the individual pole
catalog pages. Determination of maximum EPA (ft2)
and weight loading must include all luminaires,
bracketry, signs, decoration, overhead wire or other
equipment that will be mounted to the subject pole.
Luminaire EPA (ft2) and weight data are found on their
respective product pages.

Step 1. Select the luminaire and decide how many will be mounted per pole.
Determine the Effective Projected Area, EPA (ft2), which is given on the
dimensional information table.
Step 2. Determine the appropriate mounting method for the luminaire. Options
include arm, bracket or wall mounting.
Step 3. Add together the EPA's (ft2) of the luminaire and arm/bracket. Multiply by
number of fixtures to be mounted on one pole.
Step 4. Consult the Wind Map on page 495 to determine the basic wind velocity
for your area.
Step 5. Select the material (steel or aluminum) and shape (square or round) of the
pole. Refer to the “Technical Information” chart on the appropriate pole page.

The total effective projected area of the luminaires
and brackets shall not exceed the EPA (ft2) listed for
the pole selected at a given wind velocity. Poles that
are to be located in areas of known abnormal conditions will require special consideration. The map on
page 495 gives the wind velocities to be used in
determining luminaire pole compatibility.

A. Find the desired nominal mounting height in the second column.
B. Verify that the fixture weight does not exceed the maximum number
listed.
C. Compare your total EPA (ft2) loading with the maximum EPA (ft2) value
found in the wind speed column for your area. Check that the equipment
you are using will not exceed this value.
D. If both the weight and EPA (ft2) values do not exceed for which the pole
is rated, you have selected the correct pole. If, however, either one of
those numbers exceeds the maximum rated values, compare the EPA
(ft2) and fixture weight loads to the next larger pole of the same mounting
height.

NOTE: If during the pole warranty period of one year,
the product proves defective in material or workmanship, the company shall correct, at its option, by repairing or replacing at no charge to the purchaser, if the
purchaser promptly notifies the company. This warranty specifically excludes fatigue failure or similar
phenomena resulting from induced vibration harmonic
oscillation or resonance associated with the movement of air currents around the product.

CAUTION: This pole selection process is a guideline only. Lithonia Lighting assumes no responsibility for
selection and recommends consultation with qualified individuals for verification of luminaire/pole
assembly selection.

Ordering Information

Shaft type
RTA Round tapered aluminum
RSA Round straight aluminum
RSAH Round straight aluminum
hinged
SSA Square straight aluminum
SSAH Square straight aluminum
hinged
RTS Round tapered steel
STS Square tapered steel
STSH Square tapered steel
hinged
RSS Round straight steel
SSS Square straight steel
SSF Square straight fiberglass
RTF Round tapered fiberglass
RTFDB Round tapered fiberglass
direct burial
SPRTC Round tapered concrete
sportslighting
STC Square tapered concrete
SPRTS Round tapered steel

Example: SSA 16 4G DM19 DMB

Nominal
mounting
height
8-50 feet
sportslighting
poles up to 115'.
See submittal
sheets for
specific
information.

NOTES:
1
Additional architectural colors available; see Architectural
Colors brochure on www.lithonia.com.
2
Aluminum poles only.
3
RTA, RSA, SSA only.

494

Outdoor / PSG8

Nominal shaft base
size/wall thickness
(in.)
4
5
6
7
8
9
10

C
E
G
J
K
L
P

0.125
0.156
0.188
0.250
0.312
0.219
0.375

Fixture mounting method
PT

Open-top

Tenon Mounting
T20
T25
T30
T35

23/8" OD (2" NPS)
27/8" OD (21/2" NPS)
31/2" OD (3" NPS)
4" OD (31/2" NPS)

Drill Mounting
DM19
DM28
DM29
DM39
DM49
DM32

1 at 90°
2 at 180°
2 at 90°
3 at 90°
4 at 90°
3 at 120°
(Round Poles)

Aeris Drill Mounting
DM19AS
DM28AS
DM29AS
DM39AS
DM49AS
DM32AS

www.lithonia.com

1 at 90°
2 at 180°
2 at 90°
3 at 90°
4 at 90°
3 at 120°
(Round Poles)

Options
See page
509

Finish
Architectural Colors 1
Polyester Powder
Standard Colors
DDB Dark bronze
DWH White
DBL Black
BA Brushed Aluminum2
Classic Colors
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
Class 1 Architectural Anodize3
ABL Black
ADB Dark bronze
ANA Natural
Existing Colors
MAEX Match existing

Wind Map

www.lithonia.com

Outdoor / PSG8

495

Anchor Base Poles

Round Straight Aluminum

RSA
Features
Shaft – One-piece extruded 6063-T6 aluminum alloy with T6 temper. Circumferential
satin-brushed finish. 41/2" round straight
tube is uniform in cross-section down length
of shaft.
Anchor Base – Cast from A356 aluminum
alloy and heat treated to T6 temper. Base
slipfits shaft, and they are joined together
by continuous circumferential welds at
both top and bottom of anchor base to
provide maximum strength at area of critical stress.

Anchor Bolts – Top 12" is galvanized per
ASTM A-153. Made of carbon steel bar with
a minimum-yield strength of 55,000 psi.

Finish – Standard finish is brushed aluminum. Optional polyester powder paint and
anodized finishes available.

Grounding – Ground lug located immediately inside hand hole is tapped for 3/8"-16
UNC ground bolt (not supplied).

Bolt Covers – A356 nut covers included
with anchor base unless otherwise specified.

Hand hole – Reinforced 3"x5" hand hole is
located 18" above base. Cover and attachment hardware furnished.
Hardware – Stainless steel.
Top Cap – Cast-aluminum cap is provided
for drill-mount poles.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

NOTES:
1 Mounting Arrangement: (PT) Open Top; (T20) 23/8" OD
(2" NPS)
2 Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 511.

Catalog
Number
RSA 8 4C
RSA 8 4-5C
RSA 8 4-5G
RSA 10 4C
RSA 10 4-5C
RSA 10 4-5G
RSA 10 5C
RSA 12 4C
RSA 12 4-5C
RSA 12 4-5G
RSA 12 5C
RSA 12 5E
RSA 12 5G
RSA 14 4C
RSA 14 4-5C
RSA 14 4-5G
RSA 14 5C
RSA 14 5E
RSA 14 5G
RSA 16 4C
RSA 16 4-5C
RSA 16 4-5G
RSA 16 5C
RSA 16 5E
RSA 16 5G
RSA 16 6E
RSA 16 6G
RSA 18 4-5G
RSA 18 5C
RSA 18 5E
RSA 18 5G
RSA 18 6G
RSA 20 4-5G
RSA 20 5C
RSA 20 5E
RSA 20 5G
RSA 20 6E
RSA 20 6G
RSA 25 4-5G
RSA 25 6E
RSA 25 6G
RSA 30 6G

Nom.
mount.
ht. (ft.)
8
8
8
10
10
10
10
12
12
12
12
12
12
14
14
14
14
14
14
16
16
16
16
16
16
16
16
18
18
18
18
18
20
20
20
20
20
20
25
25
25
30

Pole
shaft size
(in. x in. x ft.)
4.0 x 8.0
4.5 x 8.0
4.5 x 8.0
4.0 x 10.0
4.5 x 10.0
4.5 x 10.0
5.0 x 10.0
4.0 x 12.0
4.5 x 12.0
4.5 x 12.0
5.0 x 12.0
5.0 x 12.0
5.0 x 12.0
4.0 x 14.0
4.5 x 14.0
4.5 x 14.0
5.0 x 14.0
5.0 x 14.0
5.0 x 14.0
4.0 x 16.0
4.5 x 16.0
4.5 x 16.0
5.0 x 16.0
5.0 x 16.0
5.0 x 16.0
6.0 x 16.0
6.0 x 16.0
4.5 x 18.0
5.0 x 18.0
5.0 x 18.0
5.0 x 18.0
6.0 x 18.0
4.5 x 20.0
5.0 x 20.0
5.0 x 20.0
5.0 x 20.0
6.0 x 20.0
6.0 x 20.0
4.5 x 25.0
6.0 x 25.0
6.0 x 25.0
6.0 x 30.0

Wall
thick.
(in.)
0.125
0.125
0.188
0.125
0.125
0.188
0.125
0.125
0.125
0.188
0.125
0.156
0.188
0.125
0.125
0.188
0.125
0.156
0.188
0.125
0.125
0.188
0.125
0.156
0.188
0.156
0.188
0.188
0.125
0.156
0.188
0.188
0.188
0.125
0.156
0.188
0.156
0.188
0.188
0.156
0.188
0.188

B

496

Outdoor / PSG8

80
mph
11.2
14.6
21.8
8.2
10.6
16.3
13.6
6.0
8.1
12.7
10.3
13.2
16.2
4.1
5.8
9.7
7.8
10.3
12.8
2.8
4.2
7.5
5.9
8.0
10.1
13.6
16.8
5.7
4.3
6.1
8.0
13.9
4.3
3.0
4.7
6.4
9.3
11.8
1.3
5.2
7.1
3.5

90
mph
8.6
11.3
17.0
6.1
8.1
12.6
10.6
4.3
6.0
9.7
8.0
10.3
12.6
2.8
4.2
7.3
6.0
8.0
9.9
1.6
2.8
5.5
4.4
6.1
7.8
10.6
13.0
4.0
3.1
4.6
6.8
10.7
2.9
2.1
3.4
4.8
7.1
9.1
—
3.8
5.3
2.4

Bolt
100 Max.
circle
mph wt.
(in.)
6.8 125 6-1/2-8-1/4
9.1 175 7-1/8-8-3/8
13.7 225 7-1/8-8-3/8
4.7 100 6-1/2-8-1/4
6.5 133 7-1/8-8-3/8
10.1 175 7-1/8-8-3/8
8.5 150 7-1/2-9-1/2
3.2 110 6-1/2-8-1/4
4.8
80 7-1/8-8-3/8
7.7 185 7-1/8-8-3/8
6.3 150 7-1/2-9-1/2
8.2 200 7-1/2-9-1/2
10.1 225 7-1/2-9-1/2
1.9
75 6-1/2-8-1/4
3.3
60 7-1/8-8-3/8
5.8 190 7-1/8-8-3/8
4.7 100 7-1/2-9-1/2
6.3 125 7-1/2-9-1/2
7.9 150 7-1/2-9-1/2
1.0 150 6-1/2-8-1/2
2.1
50 7-1/8-8-3/8
4.3 155 7-1/8-8-3/8
3.4 175 7-1/2-9-1/2
4.8 190 7-1/2-9-1/2
6.1 200 7-1/2-9-1/2
8.4 225 8-3/4-10-1/4
10.4 245 8-3/4-10-1/4
3.1 123 7-1/8-8-3/8
2.4 150 7-1/2-9-1/2
3.5 175 7-1/2-9-1/2
4.7 225 7-1/2-9-1/2
8.5 225 8-3/4-10-1/4
2.1
95 7-1/8-8-3/8
1.5 150 7-1/2-9-1/2
2.6 150 7-1/2-9-1/2
3.6 150 7-1/2-9-1/2
5.5 175 8-3/4-10-1/4
7.1 200 8-3/4-10-1/4
— 100 7-1/8-8-3/8
2.8 150 8-3/4-10-1/4
4.0 150 8-3/4-10-1/4
1.6 200 8-3/4-10-1/4

Bolt
Approx.
size
ship wt.
(in. x in. x in.) (lbs.)
3/4 x 18 x 3
22
3/4 x 18 x 3
30
3/4 x 18 x 3
38
3/4 x 18 x 3
26
3/4 x 18 x 3
34
3/4 x 18 x 3
43
3/4 x 18 x 3
36
3/4 x 18 x 3
30
3/4 x 18 x 3
38
3/4 x 18 x 3
50
3/4 x 18 x 3
36
3/4 x 18 x 3
44
3/4 x 18 x 3
53
3/4 x 18 x 3
35
3/4 x 18 x 3
42
3/4 x 18 x 3
56
3/4 x 18 x 3
39
3/4 x 18 x 3
47
3/4 x 18 x 3
56
3/4 x 18 x 3
38
3/4 x 18 x 3
46
3/4 x 18 x 3
62
3/4 x 18 x 3
46
3/4 x 18 x 3
53
3/4 x 18 x 3
60
3/4 x 30 x 3
53
3/4 x 30 x 3
78
3/4 x 18 x 3
68
3/4 x 18 x 3
48
3/4 x 18 x 3
58
3/4 x 18 x 3
68
3/4 x 30 x 3
86
3/4 x 18 x 3
74
3/4 x 18 x 3
54
3/4 x 18 x 3
68
3/4 x 18 x 3
82
3/4 x 30 x 3
95
3/4 x 30 x 3
110
3/4 x 18 x 3
89
3/4 x 30 x 3
108
3/4 x 30 x 3
128
3/4 x 30 x 3
146

Pole Data
Shaft
base
size

Bolt
circle
A

4"
4 1 / 2"
5"
6"

61/2"-8 1/ 4"
71/8"-8 3/ 8"
71/2"-9 1/ 2"
83/4"-101/4"

Bolt
Base
projection square
B
C
3 1/4"
3 1/4"
3 1/4"
3 1/2"

www.lithonia.com
keyword: RSA

8 3/4"
8 1/2"
9 1/4"
101/4"

Anchor
Warehouse
bolt
anchor bolt Template
description description number
ABRSA-4
ABRSA-4-5
ABRSA-5
ABRSA-6

AB18-0
AB18-0
AB18-0
AB30-0

PJ50057
PJ50040
PJ50058
PJ50059

Anchor Base Poles

Round Tapered Aluminum

RTA
minimum yield strength of 55,000 PSI.
Grounding – A ground lug located immediately inside the hand hole is tapped round
bolt (by others).
Hand hole – A nominal 3"x5" or 4"x6" reinforced flushed covered hand hole is centered 18" above the base.
Hardware – All screws, nuts and bolts are
made of stainless steel.
Top Cap – Cast-aluminum cap is provided
for drill-mount poles.
Finish – Standard finish is brushed aluminum. Optional polyester powder paint and

Features
Shaft – The shaft is spun tapered from
seamless 6063 alloy aluminum tubing and
is heat-treated to produce a T6 temper.
The shaft is cone tapered to the butt
diameter.
Anchor Base – Cast from A356 alloy aluminum, the anchor base is heat-treated to a
T6 condition. The anchor base telescopes
the pole shaft and is circumferentially
welded top and bottom.
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of steel rod having a

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

2

EPA (ft ) with 1.3 gust
Catalog
number
RTA 20 5C
RTA 20 5G
RTA 20 6G
RTA 20 7E
RTA 25 6E
RTA 25 7E
RTA 25 8E
RTA 25 8G
RTA 30 7E
RTA 30 8E
RTA 30 8G
RTA 30 10G
RTA 35 8E
RTA 35 8G
RTA 35 8J
RTA 35 10G
RTA 39 8G
RTA 39 8J
RTA 39 10G

Nom.
mount
ht. (ft.)
20
20
20
20
25
25
25
25
30
30
30
30
35
35
35
35
39
39
39

RTA 39 10J

39

Pole
Wall
shaft size thickness 80
90
(in. x in. x ft.)
(in.)
mph mph
5 x 3 x 19’8”
0.125
3.9
2.5
5 x 3 x 19’8”
0.188
7.4
5.2
6 x 4 x 19’8”
0.188
12.2 9.2
7 x 4 x 19’8”
0.156
15.0 11.4
6 x 4 x 24’ 8”
0.156
5.3
3.6
7 x 4 x 24’8”
0.156
9.5
7.0
8 x 4.5 x 24’ 8”
0.156
14.2 10.9
8 x 4.5 x 24’ 8”
0.188
18.0 13.8
7 x 4 x 29’8”
0.156
5.5
3.8
8 x 4.5 x 29’8”
0.156
9.4
7.0
8 x 4.5 x 29’8”
0.188
12.4 9.4
10 x 6 x 29’8”
0.188
23.8 18.3
8 x 4.5 x 34’8”
0.156
5.8
4.1
8 x 4.5 x 34’8”
0.188
8.3
6.0
8 x 4.5 x 34’8”
0.250
12.9 9.7
10 x 6 x 34’8”
0.188
17.9 13.6
8 x 4.5 x 38’8”
0.188
5.6
3.9
8 x 4.5 x 38’8”
0.250
9.7
7.1
10 x 6 x 38’8”
0.188
14.2 10.5

Approx
100 Max. Bolt circle
Bolt size ship wt.
mph wt.
(in.)
(in. x in. x in.) (lbs.)
1.6 100
7-1/2-9-1/2 3/4 x 18 x 3
62
3.8 100
7-1/2-9-1/2 3/4 x 18 x 3
72
7.2 214
9–10
3/4 x 30 x 3
107
9.0 256
9-7/8-11-1/4
1 x 36 x 4
103
2.6 114
9–10
3/4 x 30 x 3
106
5.4 162
9-7/8-11-1/4
1 x 36 x 4
120
8.5 220
11–12
1 x 36 x 4
130
10.9 261
11–12
1 x 36 x 4
153
2.7 111
9-7/8-11-1/4
1 x 36 x 4
135
5.3 151
11–12
1 x 36 x 4
150
7.3 179
11–12
1 x 36 x 4
175
14.3 377 14-1/4-16-1/4 1 x 40 x 4
235
2.9 119
11–12
1 x 36 x 4
185
4.5 141
11–12
1 x 36 x 4
220
7.5 183
11–12
1 x 36 x 4
251
10.4 295 14-1/4-16-1/4 1 x 40 x 4
268
2.7 122
11–12
1 x 36 x 4
250
5.4 158
11–12
1 x 36 x 4
280
7.8 253 14-1/4-16-1/4 1 x 40 x 4
295

10 x 6 x 38’8”

11.9

0.250

20.4

15.5

anodized finishes available.
Bolt Covers – A356 nut covers shall be
included with each anchor base unless
otherwise specified.

300

14-1/2-16

1-1/4 x 48 x 5

373

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

18"
(45.7cm)

Pole Data
Shaft
base
size

Bolt
circle
A

5"
6"
7"
8"
10"G
10"J

7 1/ 2"–91/ 2"
9"–10"
97/ 8"–11 1/4"
11-12"
14 1/ 4"–16 1/ 4"
141/2"–16"

Bolt
Base
projection square
B
C
3 1 / 4"
3 1 / 2"
4 1 / 8"
4 1 / 4"
4 1 / 2"
5"

9 1/ 4 "
10"
10 1/ 2"
11 1/ 2"
14 1/ 2"
141/ 2"

Anchor Warehouse
bolt
anchor bolt
description description

Template
number

ABRTA-5
ABRTA-6
ABRTA-7
ABRTA-8
ABRTA-10G
ABRTA-10J

PJ50032
PJ50033
PJ50034
PJ50035
PJ50036
PJ50063

AB18-0
AB30-0
AB36-0
AB36-0
N/A
N/A

B
NOTES:
1 Mounting Arrangement: (PT) Open Top; (T20) 23/8" OD
(2" NPS)
2 Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 511.

www.lithonia.com
keyword: RTA

Outdoor / PSG8

497

Anchor Base Poles

Round Straight Aluminum, Hinged

RSAH
Features
Shaft – One-piece extruded 6063 aluminum
alloy with a T6 temper. Circumferential satinbrushed finish. The round, straight tube is
uniform in cross-section down the length
of the shaft.
Hinged Anchor Base – Cast from A356
aluminum alloy, the anchor base is heattreated to a T6 temper. The shaft inserts
into the tilting section of the hinged base
and is joined together by continuous circumferential welds at the outside top and
inside bottom. The tilting and anchored

sections of the hinged base are joined by
a ¾" diameter solid aluminum pivot rod. The
tilting section of the hinged base is held in
a vertical position by three ½"-13 x 2½"
stainless steel hex head bolts that attach
to stainless steel inserts cast into the aluminum base. A cast-aluminum two-piece
cover is included.
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of carbon steel bar
having a minimum-yield strength of
55,000 PSI.
Hand hole – Available as an option, and
located 90o to the right of the hinge.

Hardware – Stainless steel.
Top Cap – Cast-aluminum cap is provided
for drill-mount poles.
Finish – Standard finish is brushed aluminum.
Optional polyester powder painted and
anodized finishes available.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.

Catalog
number
RSAH 10 4C

Nom.
Pole
Wall
mount. shaft size thick.
ht. (ft.) (in. x in. x ft.) (in.)
10

4 x 4 x 10

0.125

80
90
100 Max.
mph mph mph wt.
8.2

6.1

4.7

100

Bolt
circle
(in.)
8-1/2-10

Bolt
Approx.
size
ship wt.
(in. x in. x in.)
(lbs)
3/4 x 18 x 3

43

Do not erect poles without having fixtures installed.

RSAH 14 4C

14

4 x 4 x 14

0.125

4.4

3.0

2.1

100

8-1/2-10

3/4 x 18 x 3

50

If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

RSAH 14 5E

14

5 x 5 x 14

0.156

10.6

8.2

6.5

100

8-1/2-10

3/4 x 18 x 3

66

3

/4" Solid aluminum pivot rod

C

A

RSAH 16 4C

16

4 x 4 x 16

0.125

3.1

1.9

1.2

100

8-1/2-10

3/4 x 18 x 3

54

RSAH 16 5C

16

5 x 5 x 16

0.125

6.2

4.7

3.6

100

8-1/2-10

3/4 x 18 x 3

60

RSAH 16 6E

16

6 x 6 x 16

0.156

13.8

10.7

8.5

100

8-1/2-10

3/4 x 30 x 3

88

RSAH 18 5C

18

5 x 5 x 18

0.125

4.5

3.3

2.5

130

8-1/2-10

3/4 x 18 x 3

65

RSAH 18 5G

18

5 x 5 x 18

0.188

8.2

6.2

4.9

130

8-1/2-10

3/4 x 18 x 3

90

RSAH 20 5C

20

5 x 5 x 20

0.125

3.2

2.2

1.6

130

8-1/2-10

3/4 x 18 x 3

69

RSAH 20 5G

20

5 x 5 x 20

0.188

6.4

4.8

3.7

130

8-1/2-10

3/4 x 18 x 3

97

RSAH 20 6G

20

6 x 6 x 20

0.188

11.7

9.0

7.1

130

8-1/2-10

3/4 x 30 x 3

110

Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square
C

Anchor
bolt
description

Warehouse
anchor bolt
description

Template
number

4"
5"
6"

81/ 2"–10"
81/ 2"–10"
81/ 2"–10"

3 1/ 2 "
3 1/ 2 "
3 1/ 2 "

125/8"
125/8"
125/8"

ABRSAH-4
ABRSAH-5
ABRSAH-6

AB18-0
AB18-0
AB30-0

PJ50060
PJ50061
PJ50062

Pole Data

Tapped 3/8"-16 for
ground connector

Two-piece castaluminum cover

B

498

Outdoor / PSG8

NOTES:
1 Mounting arrangement: (PT) Open Top; (T20) 23/8" OD (2"
NPS)
2 Drill mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 511.

www.lithonia.com
keyword: RSAH

Anchor Base Poles

Square Straight Aluminum

SSA
Grounding – Ground lug located immediately inside hand hole is tapped for 3/8"-16
UNC grounding bolt (by others).
Hand hole – Rectangular reinforced hand
hole having nominal dimensions 2" x 4" (4"
sq.) or 21/2" x 4" (5" or 6" sq.). Hand-hole cover
plate made from aluminum alloy with attachment hardware provided.
Hardware – All screws, nuts and bolts are
made of stainless steel.
Top Cap – Weatherproof, cast-aluminum
cap is provided, for drill-mount poles.
Finish – Brushed aluminum is standard;
optional polyester powder paint and

Features
Shaft – Square, non-tapered shaft made
from extruded 6063-T6 or 6061-T6 aluminum alloy shaft width is 4, 5 or 6 inches.
Wall thickness is .125, .188 or .250, depending on mounting height and loading
requirements.
Anchor Base – Cast from 356-T6 aluminum
alloy. Anchor bolt holes are recessed and
covered by aluminum caps.
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of 3/4" or 1" diameter
steel rod having minimum-yield strength
of 55,000 psi.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

2

EPA (ft ) with 1.3 gust
Nom.
Pole
Catalog
mount. shaft size
number
ht. (ft.) (in. x in. x ft.)
SSA 8 4C
8
4.0 x 8.0
SSA 10 4C
10
4.0 x 10.0
SSA 12 4C
12
4.0 x 12.0
SSA 14 4C
14
4.0 x 14.0
SSA 15 4C
15
4.0 x 15.0
SSA 16 4C
16
4.0 x 16.0
SSA 16 4G
16
4.0 x 16.0
SSA 16 5G
16
5.0 x 16.0
SSA 18 4C
18
4.0 x 18.0
SSA 18 4G
18
4.0 x 18.0
SSA 18 5G
18
5.0 x 18.0
SSA 20 4C
20
4.0 x 20.0
SSA 20 4G
20
4.0 x 20.0
SSA 20 5G
20
5.0 x 20.0
SSA 20 6G
20
6.0 x 20.0
SSA 20 6J
20
6.0 x 20.0
SSA 25 5G
25
5.0 x 25.0
SSA 25 6G
25
6.0 x 25.0
SSA 25 6J
25
6.0 x 25.0
SSA 30 6G
30
6.0 x 30.0
SSA 30 6J
30
6.0 x 30.0
SSA 32 6J
32
6.0 x 32.0
SSA 35 6J
35
6.0 x 35.0

Wall
thick.
(in.)
0.125
0.125
0.125
0.125
0.125
0.125
0.188
0.188
0.125
0.188
0.188
0.125
0.188
0.188
0.188
0.250
0.188
0.188
0.250
0.188
0.250
0.250
0.250

80
mph
16.5
11.5
12.4
9.3
8.0
6.9
11.8
15.0
4.9
9.2
16.8
3.3
7.0
13.6
22.0
30.4
7.2
13.2
19.7
7.0
12.2
9.7
6.4

anodized finishes available.
Bolt Covers – Nut covers included with
each anchor base.

Bolt
Bolt
90
100 Max.
circle
size
mph mph wt.
(in.)
(in. x in. x in.)
12.6 9.9 300 8-1/2-9-5/8
3/4 x 18 x 3
8.6
6.5 230 8-1/2-9-5/8
3/4 x 18 x 3
9.2
6.9 160 8-1/2-9-5/8
3/4 x 18 x 3
6.7
4.8 120 8-1/2-9-5/8
3/4 x 18 x 3
5.6
3.9 100 8-1/2-9-5/8
3/4 x 18 x 3
4.7
3.1
90
8-1/2-9-5/8
3/4 x 18 x 3
8.5
6.2 130 8-1/2-9-5/8
3/4 x 30 x 3
11.1 7.5 280 10-1/2-11-1/2 3/4 x 30 x 3
3.0
1.7
70
8-1/2-9-5/8
3/4 x 18 x 3
6.4
4.4 100 8-1/2-9-5/8
3/4 x 30 x 3
12.2 8.9 230 10-1/2-11-1/2 3/4 x 30 x 3
1.7
0.5
40
8-1/2-9-5/8
3/4 x 18 x 3
4.6
2.9
80
8-1/2-9-5/8
3/4 x 30 x 3
9.5
6.6 180 10-1/2-11-1/2 3/4 x 30 x 3
15.9 11.6 230
12-13
1 x 36 x 4
22.6 17.0 300
12-13
1 x 36 x 4
4.2
2.0 110 10-1/2-11-1/2 3/4 x 30 x 3
8.6
5.4 180
12-13
1 x 36 x 4
13.8 9.5 250
12-13
1 x 36 x 4
3.4
0.8 130
12-13
1 x 36 x 4
7.5
4.1 170
12-13
1 x 36 x 4
5.4
2.3 160
12-13
1 x 36 x 4
2.6
— 200
12-13
1 x 36 x 4

Approx.
ship wt.
(lbs.)
32
37
40
50
52
54
74
83
57
80
91
62
85
107
155
202
130
180
224
210
258
272
294

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

A

C
Tapped 3/8"
for ground
connector
Nut
cover
disc

Pole Data
Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square
C

4"C
4"G
5"
6"

81/2-9 5/8"
81/2-9 5/8"
10 1/2-11 1/2"
12"-13"

3 1/ 8"
3 1/ 8"
3 1/ 4"
4"

9 15/ 16"
9 15/ 16"
11 9/16"
121/ 4"

Anchor
Warehouse
bolt
anchor bolt
description description

Template
number

ABSSA-4C
ABSSA-4G
ABSSA-5
ABSSA-6

PJ50045
PJ50045
PJ50046
PJ50044

AB18-0
AB30-0
AB30-0
AB36-0

B

NOTES:
1 Mounting arrangement: (PT) Open top; (T20) 23/8" OD (2" NPS)
2 Drill mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures at 180°
3 Options: See page 509.
4 Brackets: See page 511.

www.lithonia.com
keyword: SSA

Outdoor / PSG8

499

Anchor Base Poles

Square Straight Aluminum, Hinged

SSAH
Features
Shaft – Square, non-tapered shaft made
from extruded 6063-T6 aluminum alloy. Shaft
width is 4 or 5 inches. Wall thickness is .125
or .188 depending on mounting height and
loading requirements.
Hinged Anchor Base – Cast from A356
aluminum alloy and heat treated to a T6
temper. The shaft inserts into the tilting
section of the hinged base and is joined
together by continuous circumferential
welds at the outside top and inside bottom. The tilting and anchored sections of

the hinged base is held in a vertical position by three ½"–13 x 2½" stainless steel hex
head bolts which attach to stainless steel
inserts cast into the aluminum base. A castaluminum two-piece cover is included.
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of ¾" diameter steel
rod having minimum-yield strength of
55,000 psi.
Hand hole – Available as an option, and
located 90° to the right of the hinge.
Hardware – All screws, nuts and bolts are
made of stainless steel.

Top Cap – Weatherproof, cast-aluminum
cap is provided, for drill-mount poles.
Finish – Brushed aluminum is standard;
optional polyester powder paint and anodized finishes available.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust
Nom.
mount.
ht. (ft.)

Pole
shaft size
(in. x in. x ft.)

Wall
thick.
(in.)

80
90 100 Max.
mph mph mph wt.

SSAH 10 4C

10

4 x 4 x 10

0.125

13.1

9.9

7.5

100

8-1/2-10

3/4 x 18 x 3

48

SSAH 12 4C

12

4 x 4 x 12

0.125

9.6

7.0

5.1

100

8-1/2-10

3/4 x 18 x 3

53

SSAH 14 4C

14

4 x 4 x 14

0.125

7.0

4.9

3.3

100

8-1/2-10

3/4 x 18 x 3

57

SSAH 15 4C

15

4 x 4 x 15

0.125

6.0

4.0

2.6

100

8-1/2-10

3/4 x 18 x 3

60

SSAH 16 4C

16

4 x 4 x 16

0.125

5.0

3.2

1.9

100

8-1/2-10

3/4 x 18 x 3

62

SSAH 16 4G

16

4 x 4 x 16

0.188

8.9

6.2

4.3

150

8-1/2-10

3/4 x 30 x 3

86

SSAH 18 4C

18

4 x 4 x 18

0.125

3.4

1.8

0.7

100

8-1/2-10

3/4 x 18 x 3

67

SSAH 18 4G

18

4 x 4 x 18

0.188

6.8

4.5

2.9

100

8-1/2-10

3/4 x 30 x 3

93

SSAH 18 5G

18

5 x 5 x 18

0.188

12.6

8.8

6.1

150 9-5/16-10 3/4 x 30 x 3

108

SSAH 20 4G

20

4 x 4 x 20

0.188

5.0

3.0

1.6

150

3/4 x 30 x 3

100

SSAH 20 5G

20

5 x 5 x 20

0.188

9.9

6.6

4.2

175 9-5/16-10 3/4 x 30 x 3

117

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

NOTES:
1 Mounting arrangement: (PT) Open top; (T20) 23/8" OD (2"
NPS)
2 Drill mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 511.

Catalog
number

Bolt
circle
(in.)

8-1/2-10

Bolt
Approx.
size
ship wt.
(in. x in. x in.) (lbs.)

Pole Data
Hinge direction
“A” Side of Pole

Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square
C

Anchor
bolt
description

Warehouse
anchor bolt
description

Template
number

4"C
4"G
5"

8 1/ 2-10"
8 1/ 2-10"
9 5/ 16-10"

3 1/2"
3 1/2"
3 1/2"

11 11/ 16"
11 11/ 16"
11 11/ 16"

ABSSAH-4C
ABSSAH-4G
ABSSAH-5

AB18-0
AB30-0
AB30-0

PJ50055
PJ50055
PJ50056

Two-piece castaluminum cover

A
B

500

Outdoor / PSG8

www.lithonia.com
keyword: SSAH

Anchor Base Poles

Round Straight Steel

RSS
Features
Shaft – Weldable grade A500 or A513 carbon steel tubing with minimum yield of
46,000 or 42,000 psi. Uniform wall thickness
of .120". Shafts are one-piece construction with a full longitudinal weld. The
round, straight tube is uniform in crosssection down length of shaft.

Anchor Bolts – Top 12" is galvanized per
ASTM A-153. Made of carbon steel bar
with minimum-yield strength of 55,000 psi.

Finish – Dark bronze polyester powder
paint (DDB) standard; optional polyester powder paint finishes available.

Grounding – Nut holder located immediately inside hand hole is tapped for ½"-13
UNC ground bolt and nut (provided by
others).

Base Cover – Full-base cover finished to
match pole.

Hand hole – Nominal 3"x5" hand hole is
located 18" above base. Cover and attachment hardware provided.

Anchor Base – Fabricated from carbon
steel plate (ASTM A-36 ). ¾" thickness.
Base plate and shaft are circumferentially
welded at both top and bottom to provide
maximum strength at area of critical
stress.

Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Plastic cap is provided for drillmount poles.

TECHNICAL INFORMATION

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust
Nom.

Pole

Wall

Bolt

Catalog

mount.

Shaft Size

Thick.

80

Max.

90

Max.

100

Number

ht. (ft.) (in. x in. x ft.)

(in.)

mph

wt.

mph

wt.

mph

Max. Circle
wt.

Bolt

Approx.

Size

ship wt.

(in.) (in. x in. x in.)

(lbs.)

RSS 8 4-5B

8

4.5 x 8.0

0.120

24.5

615

19.5

490

15.8

395

8

3/4 x 18 x 3

55

RSS 10 3B

10

3.0 x 10.0

0.120

10

250

7.7

190

6.0

175

8

3/4 x 18 x 3

55

RSS 10 4B

10

4.0 x 10.0

0.120

19.1

480

15.0

375

12.2

305

8

3/4 x 18 x 3

70

RSS 10 4-5B

10

4.5 x 10.0

0.120

24.5

615

19.5

490

15.8

395

8

3/4 x 18 x 3

75

RSS 12 3B

12

3.0 x 12.0

0.120

7.7

195

5.8

145

4.4

130

8

3/4 x 18 x 3

60

RSS 12 4B

12

4.0 x 12.0

0.120

15.0

390

11.8

300

9.5

240

8

3/4 x 18 x 3

80

RSS 12 4-5B

12

4.5 x 12.0

0.120

19.8

495

15.7

395

12.7

320

8

3/4 x 18 x 3

85

RSS 14 3B

14

3.0 x 14.0

0.120

6.0

175

4.4

130

3.3

90

8

3/4 x 18 x 3

70

RSS 14 4B

14

4.0 x 14.0

0.120

12.2

305

9.4

250

7.6

195

8

3/4 x 18 x 3

90

RSS 14 4-5B

14

4.5 x 14.0

0.120

16.2

405

12.8

320

10.3

260

8

3/4 x 18 x 3

95

RSS 15 4-5B

15

4.5 x 15.0

0.120

13.1

330

10.2

265

8.2

205

8

3/4 x 18 x 3

96

RSS 16 3B

16

3.0 x 16.0

0.120

4.6

125

3.2

100

2.3

60

8

3/4 x 18 x 3

80

RSS 16 4B

16

4.0 x 16.0

0.120

9.6

250

7.4

185

5.9

150

8

3/4 x 18 x 3

100

RSS 16 4-5B

16

4.5 x 16.0

0.120

13.1

330

10.2

265

8.2

205

8

3/4 x 18 x 3

105

RSS 18 3B

18

3.0 x 18.0

0.120

3.4

90

2.3

60

1.4

70

8

3/4 x 18 x 3

90

RSS 18 4B

18

4.0 x 18.0

0.120

7.6

190

5.7

180

4.5

130

8

3/4 x 18 x 3

110

RSS 18 4-5B

18

4.5 x 18.0

0.120

10.5

265

8.2

210

6.5

165

8

3/4 x 18 x 3

115

RSS 20 3B

20

3.0 x 20.0

0.120

2.4

100

1.4

75

—

—

8

3/4 x 18 x 3

100

RSS 20 4B

20

4.0 x 20.0

0.120

6.0

150

4.45

150

3.45

125

8

3/4 x 18 x 3

120

RSS 20 4-5B

20

4.5 x 20.0

0.120

8.5

215

6.6

165

5.2

130

8

3/4 x 18 x 3

130

RSS 20 5B

20

5.0 x 20.0

0.120

11.75

300

9.1

230

7.25

180

8

3/4 x 18 x 3

145

RSS 22 4-5B

22

4.5 x 22.0

0.120

4.8

130

3.6

90

2.7

90

8

3/4 x 18 x 3

134

RSS 25 4B

25

4.0 x 25.0

0.120

2.85

100

1.95

75

1.35

75

8

3/4 x 18 x 3

145

RSS 25 4-5B

25

4.0 x 25.0

0.120

4.8

130

3.6

90

2.7

90

8

3/4 x 18 x 3

145

RSS 25 5B

25

5.0 x 25.0

0.120

7.25

180

5.5

150

4.25

150

8

3/4 x 18 x 3

180

RSS 30 4-5B

30

4.5 x 30.0

0.120

2.3

80

1.5

75

1.0

60

8

3/4 x 18 x 3

185

RSS 30 5B

30

5.0 x 30.0

0.120

4.2

150

3

125

2.25

100

8

3/4 x 18 x 3

210

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

NOTES:
1 Mounting arrangement: (PT) Open top accepts KKR;
(T20) 23/8" OD (2" NPS)
2 Drill mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 511.

Nut holder
Hand-hole
cover

Pole Data
Shaft
base
size

Bolt
circle
A

3
4"
4 1/ 2 "
5"

8"
8"
8"
8"

Bolt
projection
B
31/4"
31/4"
31/4"
31/4"

x
x
x
x

31/2"
31/2"
31/2"
31/2"

Base
square
C

Anchor
bolt
description

Warehouse
anchor bolt
description

Template
number

8"
8"
8"
8"

ABRSS-4
ABRSS-4
ABRSS-4
ABRSS-4

AB18-0
AB18-0
AB18-0
AB18-0

PJ50041
PJ50041
PJ50041
PJ50041

www.lithonia.com
keyword: RSS

B

Outdoor / PSG8

501

Anchor Base Poles

Round Tapered Steel

RTS
Features
Shaft – Minimum weldable-grade (ASTM
A-595 Grade A), hot-rolled, commercialquality carbon steel tubing with minimum yield of 55,000 psi. Uniform wall
thickness of 11-gauge (0.1196") or 7gauge (0.1793"). Shafts are constructed
with full-length, longitudinal, high-frequency resistance welds. Round in
cross-section, having uniform taper of
approximately .14" per foot.
Anchor Base – Fabricated from hotrolled carbon steel plate that conforms
to ASTM A36.

Hand hole – Rectangular, reinforced handhole rim having nominal dimensions of 3"x5"
for shafts less than 6.25" base diameter and
4"x6.5" for all other shafts. Steel cover with
attachment screws included. Hand hole is
located 18" above base.
Grounding – Nut holder located immediately inside hand-hole rim is tapped for
½" – 13 UNC ground bolt and nut (provided
by others).
Anchor Bolts – Fabricated from commercial-quality hot-rolled carbon steel with
minimum yield strength of 55,000 psi. Bolts
have an "L" bend on one end.

Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof removable top
cap provided with all drill-mount poles.
Finish – Dark bronze polyester powder finish (DDB) standard; other architectural colors available.
Base Cover – Full-base cover standard.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

NOTES:
1 Mounting Arrangement: (PT) Open Top; (T20) 23/8" OD
(2" NPS)
2 Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2
fixtures at 180°
3 Options: See page 509.
4 Brackets: See page 512.

A

Nom.
Pole
mount. shaft size
ht. (ft.) (in. x in. x ft.)

Catalog
number

Wall
Bolt
Bolt
Approx.
thick.
80 Max. 90 Max. 100 Max. circle
size
ship wt.
(in.) Gauge mph wt. mph wt. mph wt. (in.) (in. x in. x in.) (lbs.)

RTS 20 5-9B

20

5.9 x 3.1 x 20

0.125

11

19.3

482

15.1

377

12.2

305

9.0

1 x 36 x 4

140

RTS 20 6-5B

20

6.5 x 3.7 x 20

0.125

11

24.2

605

19.3

482

15.6

390

9.5

1 x 36 x 4

160

RTS 25 5-9B

25

5.9 x 2.4 x 25

0.125

11

12.5

312

9.9

247

8

200

9.0

1 x 36 x 4

155

RTS 25 7-0B

25

7.0 x 3.5 x 25

0.125

11

20.3

507

16.2

405

13.1

327

10.0

1 x 36 x 4

200
280

RTS 25 7-0F

25

7.0 x 3.5 x 25

0.188

7

28.5

713

22.5

563

18.2

455

10.0

1 x 36 x 4

RTS 30 6-6B

30

6.6 x 2.4 x 30

0.125

11

11.7

292

9.3

232

7.5

187

9.5

1 x 36 x 4

200

RTS 30 8-0B

30

8.0 x 3.8 x 30

0.125

11

18.9

473

14.9

373

12

300

11.0

1 x 36 x 4

265
380

RTS 30 8-0F

30

8.0 x 3.8 x 30

0.188

7

27.5

550

21.6

542

17.5

439

11.0

1-1/4 x 42 x 6

RTS 35 7-3B

35

7.3 x 2.4 x 35

0.125

11

11.2

280

8.9

222

7.1

177

10.5

1 x 36 x 4

250

RTS 35 8-5B

35

8.5 x 3.6 x 35

0.125

11

18.9

472

15.1

377

12.2

305

11.5

1 x 36 x 4

315
370

RTS 35 9-5B

35

9.5 x 4.6 x 35

0.125

11

23.2

580

18.2

455

14.5

363

13.0

1 x 36 x 4

RTS 39 7-8B

39

7.8 x 2.4 x 39

0.125

11

10.7

267

8.5

212

6.6

165

11.0

1 x 36 x 4

285

RTS 39 9-0B

39

9.0 x 3.6 x 39

0.125

11

17.2

430

13.5

338

10.8

270

12.5

1 x 36 x 4

355
515

RTS 39 9-0F

39

9.0 x 3.6 x 39

0.188

7

26.1

654

20.6

517

16.7

419

12.5

1-1/4 x 42 x 6

RTS 45 10-0B

45

10.0 x 3.7 x 45

0.125

11

17.4

435

13.5

338

10.6

265

13.5

1 x 36 x 4

450

RTS 45 10-0F

45

10.0 x 3.7 x 45

0.188

7

25.5

639

20.2

505

16.3

409

13.5

1-1/4 x 42 x 6

650

RTS 50 10-0B

50

10.0 x 3.0 x 50

0.125

11

13.2

330

10.6

265

8.3

208

13.5

1 x 36 x 4

475

RTS 50 10-0F

50

10.0 x 3.0 x 50

0.188

7

20.5

512

16.5

412

13.6

340

13.5

1-1/4 x 42 x 6

680

Pole Data

C

B

18"

502

Outdoor / PSG8

Shaft
base
size
5.9" B
6.5" B
7.0" B
7.0" F
6.6" B
8.0" B
8.0" F
7.3" B
8.5" B
9.5" B
7.8" B
9.0" B
9.0" F
10.0" B
10.0" F

Bolt
circle
A
9"
9.5"
10"
10"
9.5"
11"
11"
10.5"
11.5"
13"
11"
12.5"
12.5"
13.5"
13.5"

Bolt
projection
B
31/2"-4 1/4"
31/2"-4 1/4"
31/2"-4 1/4"
33/4"-4 1/2"
31/2"-4 1/4"
31/2"- 41/4"
41/2"-5 1/4"
31/2"-4 1/4"
33/4"-4 1/2"
33/4"-4 1/2"
33/4"-4 1/2"
33/4"-4 1/2"
41/2"-5 1/4"
33/4"-4 1/2"
41/2"-5 1/4"

www.lithonia.com
keyword: RTS

Base
square
C
10"
101/2"
107/8"
107/8"
101/2"
111/2"
111/2"
111/4"
12"
13"
111/2"
123/8"
123/8"
14"
14"

Anchor
Warehouse Template
bolt
anchor bolt number
description description
ABRTS-5-9B
AB36-0
PJ50075
ABRTS-6-5B
AB36-0
PJ50074
ABRTS-7-0B
AB36-0
PJ50077
ABRTS-7-0F
AB36-0
PJ50076
ABRTS-6-6B
AB36-0
PJ50078
ABRTS-8-0B
AB36-0
PJ50079
ABRTS-8-0F
N/A
PJ50080
ABRTS-7-3B
AB36-0
PJ50081
ABRTS-8-5B
AB36-0
PJ50082
ABRTS-9-5B
AB36-0
PJ50083
ABRTS-7-8B
AB36-0
PJ50084
ABRTS-9-0B
AB36-0
PJ50085
ABRTS-9-0F
N/A
PJ50086
ABRTS-10-B
AB36-0
PJ50087
ABRTS-10-F
N/A
PJ50088

Anchor Base Poles

Square Straight Steel

SSS
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of ¾" or 1" diameter steel
rod having a minimum-yield strength of
55,000 psi.
Grounding – Nut holder located immediately inside hand-hole rim is tapped for a
½" –13 UNC ground bolt and nut (provided
by others).
Hand hole – Rectangular, reinforced handhole rim having nominal dimensions of 3"x5"
for all shafts. Included is steel cover with
attachment screws.
Hardware – Fasteners are high-strength,
galvanized zinc-plated or stainless steel.

Features
Shaft – Weldable grade, hot-rolled, commercial-quality carbon steel tubing with a
minimum yield of 55,000 psi (11-gauge),
50,000 psi (7-gauge). Uniform wall thickness of .125" or .188". Shaft is one piece with
a longitudinal, electric, resistance weld.
Uniformly square in cross-section with flat
sides, small corner radii and excellent torsional qualities. Available shaft widths are
4, 5 and 6 inches.
Anchor Base – Fabricated from hot-rolled
carbon steel plate that meets or exceeds a
minimum-yield strength of 36,000 psi. The
anchor base is provided with slotted holes.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust
Catalog
Number

Top Cap – Weatherproof, high-strength
plastic cap is provided for drill-mount
poles.
Finish – Dark bronze polyester powder paint
(DDB) standard; optional polyester powder paint finishes available.
Base Cover – Full-base cover finished to
match pole.

Nom.
Pole
Wall
Bolt
Bolt
Approx.
mount. Shaft Size Thick.
80 Max. 90 Max. 100 Max. Circle
Size
ship wt.
ht. (ft.) (in. x in. x ft.) (in.) Gauge mph wt. mph wt. mph wt. (in.) (in. x in. x in.) (lbs.)

SSS 10 4C

10

4.0 x 10.0

0.125

11

30.6

765

23.8

595

18.9

473

8–9

3/4 x 18 x 3

75

SSS 12 4C

12

4.0 x 12.0

0.125

11

24.4

610

18.8

470

14.8

370

8–9

3/4 x 18 x 3

90

SSS 14 4C

14

4.0 x 14.0

0.125

11

19.9

498

15.1

378

11.7

293

8–9

3/4 x 18 x 3

100

SSS 16 4C

16

4.0 x 16.0

0.125

11

15.9

398

11.8

295

8.9

223

8–9

3/4 x 18 x 3

115

SSS 18 4C

18

4.0 x 18.0

0.125

11

12.6

315

9.2

230

6.7

168

8–9

3/4 x 18 x 3

125

SSS 20 4C

20

4.0 x 20.0

0.125

11

9.6

240

6.7

167

4.5

150

8–9

3/4 x 18 x 3

140

SSS 20 4G

20

4.0 x 20.0

0.188

7

16.5

415

12.25

310

9.3

240

8–9

3/4 x 30 x 3

198

SSS 20 5C

20

5.0 x 20.0

0.125

11

17.7

443

12.7

343

9.4

235 10–12

1 x 36 x 4

185

SSS 20 5G

20

5.0 x 20.0

0.188

7

28.1

703

21.4

535

16.2

405 10–12

1 x 36 x 4

265

SSS 25 4C

25

4.0 x 25.0

0.125

11

4.8

150

2.6

100

1.0

50

8–9

3/4 x 18 x 3

170

SSS 25 4G

25

4.0 x 25.0

0.188

7

10.8

270

7.7

188

5.4

135

8–9

3/4 x 30 x 3

245

SSS 25 5C

25

5.0 x 25.0

0.125

11

9.8

245

6.3

157

3.7

150 10–12

1 x 36 x 4

225

1 x 36 x 4

320

SSS 25 5G

25

5.0 x 25.0

0.188

7

18.0

350

12.6

350

9.0

250 10–12

SSS 30 4G

30

4.0 x 30.0

0.188

7

6.4

160

4.0

100

2.3

58

8–9

3/4 x 30 x 3

295

SSS 30 5C

30

5.0 x 30.0

0.125

11

4.7

150

2.0

50

—

—

10–12

1 x 36 x 4

265

SSS 30 5G

30

5.0 x 30.0

0.188

7

10.7

267

6.7

167

3.9

100 10–12

1 x 36 x 4

380

SSS 30 6G

30

6.0 x 30.0

0.188

7

15.7

392

10.2

257

6.4

160 11–13

1 x 36 x 4

520
440

SSS 35 5G

35

5.0 x 35.0

0.188

7

5.9

150

2.5

100

—

—

10–12

1 x 36 x 4

SSS 35 6G

35

6.0 x 35.0

0.188

7

9.5

237

5.0

150

1.8

50

11–13

1 x 36 x 4

540

SSS 39 6G

39

6.0 x 39.0

0.188

7

5.1

128

1.3

33

—

—

11–13

1 x 36 x 4

605

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

Pole Data
Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square

4"C
4"G
5"
6"

8 1/2"
8 1/2"
10"-12"
11"-13"

23/ 4"-4"
23/ 4"-4"
33/ 8"-4"
33/ 8"-4"

8"
8"
11"
12 1/ 2"

Anchor
Warehouse
bolt
anchor bolt
description description

Template
number

ABSSS-4C
ABSSS-4G
ABSSS-5
ABSSS-6

PJ50004
PJ50004
PJ50010
PJ50011

AB18-0
AB30-0
AB36-0
AB36-0

B
NOTES:
1 Mounting Arrangement: (PT) Open Top; (T20) 23/8" OD
(2" NPS)
2 Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 512.

www.lithonia.com
keyword: SSS

Outdoor / PSG8

503

Anchor Base Poles

Square Tapered Steel

STS
Features
Shaft – Minimum weldable-grade (ASTM
A-595 Grade A) hot-rolled commercialquality carbon steel tubing with minimum
yield of 55,000 psi. Uniform wall thickness
of 11-gauge (0.1196") or 7-gauge (0.1793").
Shafts are constructed with full-length
longitudinal high-frequency resistance
welds and are round in cross-section,
having a uniform taper of approximately
.11" per foot.
Anchor Base – Fabricated from hot-rolled
carbon steel plate that conforms with
ASTM A36.

Anchor Bolts – Fabricated from commercial-quality, hot-rolled carbon steel with
minimum-yield strength of 55,000 psi. Bolts
have an "L" bend on one end.
Grounding – Nut holder located immediately inside hand-hole rim is tapped for a
½" – 13 UNC ground bolt and nut (provided
by others).
Hand hole – Rectangular, reinforced
hand-hole rim having nominal dimensions
of 3"x5" for shafts less than 6.375" square
and 4"x6.5" for all other shafts. Steel cover
with attachment screws included. Hand
hole is located 18" above base.

Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof, removable top
cap provided with all drill-mount poles.
Finish – Dark bronze polyester powder finish (DDB) standard; other architectural
colors available.
Base Cover – Full-base cover standard.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

NOTES:
1 Mounting Arrangement: (PT) Open Top; (T20) 23/8" OD
(2" NPS)
2 Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 512.

Catalog

Nom.
mount.

Pole
shaft size

number

ht. (ft.) (in. x in. x ft.)

Wall
thick.

80

Max.

90

Bolt
Max. 100 Max. circle

18"
C

Outdoor / PSG8

(lbs.)

(in.) Gauge mph

wt.

mph

wt.

mph

wt.

(in.)

(in. x in. x in.)

20

5.25 x 3.05 x 20

0.125

11

18.0

452

13.8

345

10.7

268

10-3/4

1 x 36 x 4

155

STS 20 5-5F

20

5.50 x 3.30 x 20

0.188

7

30.5

764

24.0

602

19.0

477

11

1 x 36 x 4

235

STS 25 6-0B

25

6.00 x 3.25 x 25

0.125

11

16.8

422

12.6

315

9.5

238

12

1 x 36 x 4

205

STS 25 6-4F

25

6.41 x 3.66 x 25

0.188

7

28.5

713

22.5

563

18.2

455

12-1/2

1 x 36 x 4

310

STS 30 6-4B

30

6.41 x 3.11 x 30

0.125

11

13.6

340

9.8

245

7.0

175

12-1/2

1 x 36 x 4

260

STS 30 6-4F

30

6.41 x 3.11 x 30

0.188

7

23.6

590

17.9

448

13.7

343

12-1/2

1 x 36 x 4

375

STS 35 6-8B

35

6.81 x 2.96 x 35

0.125

11

10.7

269

7.3

184

4.8

120

13

1 x 36 x 4

305

STS 35 7-1F

35

7.13 x 3.28 x 35

0.188

7

23.4

585

17.4

435

13.0

325

13-1/2

1 x 36 x 4

475

STS 39 7-1B

39

7.18 x 2.92 x 39

0.125

11

8.6

215

5.4

135

3.0

75

13-1/2

1 x 36 x 4

345

STS 39 7-1F

39

7.13 x 2.87 x 39

0.188

7

19.3

483

14.2

355

10.4

260

13-1/2

1 x 36 x 4

500

STS 45 7-8F

45

7.88 x 2.93 x 45

0.188

7

16.0

400

11.1

278

7.4

187

14-1/2

1 x 36 x 4

620

15-3/4 1-1/4 x 42 x 6

STS 45 8-7F

45

8.75 x 3.80 x 45

0.188

7

23.5

588

16.6

415

11.4

287

STS 50 8-8F

50

8.81 x 3.31 x 50

0.188

7

19.4

485

13.2

332

8.7

218

Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square
C

5.2" B
5.5" F
6.0" B
6.4" F
6.4" B
6.8" B
7.1" F
7.1" B
7.8" F
8.7" F
8.8" F

103/ 4"
11"
12"
12 1/ 2"
12 1/ 2"
13"
13 1/ 2"
13 1/ 2"
14 1/ 2"
15 3/ 4"
16"

3 1/ 2"-4 1/ 4"
3 3/ 4"-4 1/ 2"
3 1/ 2"-4 1/ 4"
4"-4 3/ 4"
3 1/ 2"-4 1/ 4"
3 1/ 2"-4 1/ 4"
4 1/4"-5"
3 1/ 2"-4 1/ 4"
4"-4 3/ 4"
4 3/ 4"-5 1/ 2"
4 1/ 2"-5 1/ 4"

10 3/ 4"
11"
11 1/ 2"
11 7/ 8"
11 7/ 8"
12 1/ 4"
12 5/ 8"
12 5/ 8"
13 3/ 8"
14 1/ 4"
15 1/ 2"

B

504

Approx.
ship wt.

STS 20 5-2B

16

Pole Data
A

Bolt
size

www.lithonia.com
keyword: STS

Anchor Warehouse Template
bolt
anchor bolt number
description description
ABSTS-5-2B
ABSTS-5-5F
ABSTS-6-0B
ABSTS-6-4F
ABSTS-6-4B
ABSTS-6-8B
ABSTS-7-1F
ABSTS-7-1B
ABSTS-7-8F
ABSTS-8-7F
ABSTS-8-8F

AB36-0
AB36-0
AB36-0
AB36-0
AB36-0
AB36-0
AB36-0
AB36-0
AB36-0
N/A
N/A

PJ50095
PJ50096
PJ50097
PJ50098
PJ50099
PJ50101
PJ50102
PJ50103
PJ50105
PJ50106
PJ50107

1-1/4 x42 x 6

730
780

Anchor Base Poles

Square Tapered Steel, Hinged

STSH
Features
Shaft – Weldable-grade, hot-rolled, commercial-quality carbon steel having a
guaranteed minimum yield strength of
55,000 psi and is supplied in 11-gauge
(.1196") or 7-gauge (.1793") nominal thickness. Pole is one-piece construction with
full-length, longitudinal, high-frequency,
electric-resistance weld. Shaft is square
in cross section having flat sides,
radiused corners, and uniform taper of approximately 0.11 inches per foot of length
(4-inch square poles are not tapered).
Hinge – The hinge includes a stainless

steel hinge pin. A flexible wiring guide is
provided, passing through the hinge area
for wiring protection. Hinge is external.
Anchor Base – Fabricated from hot-rolled
carbon steel plate that conforms with
ASTM A36.
Anchor Bolts – Fabricated from commercial-quality, hot-rolled carbon steel with
minimum-yield strength of 55,000 psi. Bolts
have an "L" bend on one end.
Grounding – Nut holder located immediately inside hand-hole rim is tapped for a
½" – 13 UNC ground bolt and nut (provided
by others).

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust
Catalog
Number
(pounds)

Nom.
mount.
ht. (ft.)

Pole
shaft size
(in. x in. x ft.)

STSH 20 4F

20

STSH 25 4B

25

STSH 25 6-4B

25

STSH 30 4F

30

STSH 30 6-4B

Hand hole – Rectangular, reinforced handhole rim having nominal dimensions of 3" x
5" for shafts less than 6.375" square and 4" x
6.5" for all other shafts. Steel cover with attachment screws included. Hand hole is located 18" above base.
Hardware – Fasteners are high-strength,
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof, removable top
cap provided with all drill-mount poles.
Finish – Dark bronze polyester powder finish (DDB) standard; other architectural
colors available.
Base Cover – Full-base cover is provided.

Wall
Bolt
thick.
80 Max. 90 Max. 100 Max. circle
(in.) Gauge mph wt. mph wt. mph wt. (in.)

Bolt
Approx.
size
ship .
(in. x in. x in.)
wt

4 x 4 x 20

0.188

7

217 8-1/2-10

3/4 x 18 x 3

4 x 4 x 25

0.125

11

7.1

160

4.8

160

3.1

160 8-1/2-10

3/4 x 18 x 3

370

6.41 x 3.63 x 25 0.125

11

18.0

254

13.0

254

9.3

254

1 x 36 x 4

355

Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.

0.188

7

4.0

120

2.1

120

0.8

120 8-1/2-10

3/4 x 18 x 3

435

Do not erect poles without having fixtures installed.

30

6.41 x 3.08 x 30 0.125

11

12.5

230

8.3

230

5.1

230

12-1/2

1 x 36 x 4

440

If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

STSH 35 7-1B

35

7.18 x 2.88 x 35 0.125

11

7.1

160

3.2

160

—

—

13-1/2

1 x 36 x 4

540

STSH 35 7-1F

35

7.13 x 2.87 x 35 0.188

7

22.0

155

16.9

155

12.1

155

13-1/2

1 x 36 x 4

700

STSH 39 7-1F

39

7.13 x 2.87 x 39 0.188

7

19.5

110

13.5

110

9.2

110

13-1/2

1 x 36 x 4

740

4 x 4 x 30

11.6

217

8.5

217

6.2

12-1/2

300

Pole Data
Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square
C

4.0" F
6.4" B
7.1" F
7.1" B

81/2"-10"
12 1/2"
13 1/2"
13 1/2"

3 1/ 2"-4 1/4"
3 3/ 4"-4 1/2"
4"-43/ 4"
3 1/ 2"-4 1/4"

9 3 / 4"
11 7/8"
12 5/8"
12 5/8"

Anchor
Warehouse Template
bolt
anchor bolt number
description description
ABSTSH4F
ABSTSH6-4B
ABSTSH7-1F
ABSTSH7-1B

AB18-0
AB36-0
AB36-0
AB36-0

INSTALLATION NOTES:

NOTES:
1 Mounting arrangement: (PT) Open top; (T20) 23/8" OD (2"
NPS).
2 Drill mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°.
3 Options: See page 509.
4 Brackets: See page 512.

PJ50091
PJ50092
PJ50093
PJ50094

A

Winch Ordering

Winch Detail (accessory)

Family

Winch

Shaft size

STSH

WCH

4F
6-4B
7-1B
7-1F

C

Order nomenclature
STSHWCH
STSHWCH
STSHWCH
STSHWCH

4F
6-4B
7-1B
7-1F

Bolt slots

External Hinge Detail
Hinge
Top Pin
Assem

Removable

B
Shroud
Wiring
Protection
Bottom

www.lithonia.com
keyword: STSH

Outdoor / PSG8

505

Anchor Base Poles

Round Tapered Steel

SPRTS
Features
Shaft – The cross section shall be round
or 16-sided with a 4" bend radius. Each
pole is a constant tapered hollow steel
section and shall be up to 55 feet in length
with a minimum 1½ times diameter slip joint
as standard. The pole shaft sections shall
be high-strength low-alloy steel conforming to ASTM A572 Grade 65 or ASTM A595
Grade A. The plate shall be single thickness – no laminations.

Anchor Bolts – Fabricated from commercial-quality hot-rolled carbon steel with
minimum-yield strength of 55,000 PSI. Bolts
have an "L" bend on one end.
Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof removable top
cap provided with all drill-mount poles.

Anchor Base – Fabricated from hot-rolled
carbon steel plate that conforms to ASTM
A36 or ASTM A572 Grade 42.
Hand hole – An oval, reinforced hand-hole
rim having a nominal dimension of 4"x6.5".
Steel cover with attachment screws included. Hand hole is located 18" above
base.
Grounding – Nut holder located immediately inside hand-hole rim is tapped for
½" – 13 UNC ground bolt and nut (provided
by others).

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

Top
Section

Bottom
Section

INSTALLATION NOTES:

Catalog

Nom. Base Wall Base
mount. dia. thick. dia.

Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.

number

ht (ft.) (in.)

EPA (ft2) with 1.3 gust

Wall
thick.

80

Max.

90

Max.

100

Bolt
Max. circle

Bolt
size

Num. of
anchor
bolts

(in.)

(in.)

(in.)

mph

wt.

mph

wt.

mph

wt.

(in.)

(in. x in. x in.)

SPRTS 40 HT01

40

—

—

9

0.1193

17.2

430

13.5

338

10.8

270

12.5

1 x 36 x 4

4

SPRTS 40 HT02

40

—

—

9

0.1793

26.1

654

20.6

517

16.7

419

12.5

1.25 x 42 x 6

4

Do not erect poles without having fixtures installed.

SPRTS 40 HT03

40

—

—

10

0.1793

38.6

965

30.6

765

24.6

615

13.5

1.25 x 42 x 6

4

If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

SPRTS 50 HT01

50

—

—

10

0.1193

13.2

330

10.6

265

8.3

208

13.5

1 x 36 x 4

4

SPRTS 50 HT02

50

—

—

10

0.1793

20.5

512

16.5

412

13.6

340

13.5

1.25 x 42 x 6

4

SPRTS 50 HT03

50

—

—

11

0.1793

29.9

748

23.5

588

18.6

465

15

1.25 x 42 x 6

4

SPRTS 50 HT04

50

—

—

13

0.1793

50.4 1,260 39.7

992

31.4

785

17

1.50 x 54 x 6

4

SPRTS 50 HT05

50

—

—

13

0.2391

69.2 1,730 55.0 1,375 44.2 1,105 17.5

1.75 x 84 x 6

4

SPRTS 60 HT01

60

5

0.1196

11.5

0.1793

20.0

16.0

480

13.0

390

16

1.25 x 42 x 6

4

SPRTS 60 HT02

60

6.5

0.1196

13

0.1793

36.0 1,080 29.0

870

22.0

660

17

1.25 x 42 x 6

6

SPRTS 60 HT03

60

6.6

0.1793

13

0.2391

49.0 1,470 40.0 1,200 32.0

960

17

1.50 x 54 x 6

6

SPRTS 60 HT04

60

12

0.1793 15.87

0.1875

78.0 2,340 62.0 1,860 50.0 1,500

21

1.50 x 54 x 6

6

SPRTS 70 HT01

70

6.6

0.1793

13

0.1793

20.6

515

16.7

417

13.7

342

17

1.50 x 54 x 6

4

SPRTS 70 HT02

70

6.6

0.1793

13

0.2391

23.8

595

19.3

482

15.9

397

17.5

1.75 x 84 x 6

4

SPRTS 70 HT03

70

12

0.1793 14.57

0.1875

39.0 1,170 30.0

900

23.0

690

19

1.25 x 42 x 6

6

SPRTS 70 HT04

70

12

0.1793 15.87

0.1875

52.0 1,560 41.0 1,230 33.0

990

21

1.50 x 54 x 6

6

SPRTS 70 HT05

70

12

0.1793 16.82

0.1875

65.0 1,950 53.0 1,590 42.0 1,260 22.75

1.50 x 54 x 6

6

SPRTS 80 HT01

80

12

0.1793 15.87

0.1875

37.0 1,110 29.0

23.0

690

21

1.50 x 54 x 6

6

SPRTS 80 HT02

80

12

0.1793 16.82

0.1875

45.0 1,350 36.0 1,080 28.0

840

22.75

1.50 x 54 x 6

6

SPRTS 80 HT03

80

13

0.1875 17.53

0.2092

58.0 1,740 46.0 1,380 35.0 1,050

23

1.50 x 54 x 6

6

SPRTS 80 HT04

80

12

0.1793

0.1875

70.0 2,100 56.0 1,680 44.0 1,320

23

1.50 x 54 x 6

8

18.7

600

870

18"

4-Bolt
C

B

D

A
Hand Hole

506

Outdoor / PSG8

8-Bolt
C

6-Bolt
B

C

D

A
Hand Hole

www.lithonia.com
keyword: SPRTS

B

D

A
Hand Hole

SPRTS Options

Crossarms for SPRTS Sportslighting Poles

Angle Iron Crossarms for Steel Poles
Projected area is for the crossarm only. The crossarm projected area is added to
the luminaire projected area to get a total effective projected area (EPA).

ACR6
Angle Iron Crossarms for Steel Poles

13'-0"
Catalog
number

Arm EPA
(sq. ft.)

Weight
(lbs.)

ACR2

1.98

34.0

ACR3

3.12

54.0

ACR4

4.53

78.0

ACR5

5.95

103.0

ACR6

7.37

127.0

2'-6"
1.75"

ACR6
13'-0"

2'-6"
1.75"
8"

6'-2"
1.75"

6-Fixture Angle Arm

ACR5

ACR4

10'-6"

1.75"

2'-6"

4'-11"

3'-8"

4'-11"

8"

8"

3'-8"

1.75"

4-Fixture Angle Arm
ACR2

ACR3
5'-6"
2'-6"

8"

2'-6"

2.00"

5-Fixture Angle Arm

2'-5"

8'-0"
ACR4

3'-6"
3'-0"

1.75"

1'-5"

2'-5"

2.00"
3-Fixture Angle Arm

www.lithonia.com

8"

1.75"

1'-5"

2-Fixture Angle Arm

Outdoor / PSG8

507

SPRTS Options

Crossarms for SPRTS Sportslighting Poles

Tubular Crossarms for Steel Poles
Projected area is for the crossarm only. The crossarm projected area is added to the
luminaire projected area to get a total effective projected area (EPA).
CR8

Tubular Crossarms for Steel Poles

22'-0"

3'-0"

Catalog
number

EPA
(sq. ft.)

Weight
(lbs.)

CR2
CR3
CR4
CR5
CR6
CR7
CR8

1.28
2.45
3.21
4.17
5.13
6.10
7.06

44.0
65.0
98.0
116.0
150.0
176.0
271.0

3" Sched 40 pipe

8-Fixture Crossarm

CR7

CR6
16'-0"

19'-0"

3'-0"

3" Sched 40 pipe

3'-0"

3" Sched
40 pipe

7-Fixture Crossarm

6-Fixture Crossarm

CR5

CR4

13'-0"

10'-0"

3'-0"

3" Sched
40 pipe

3'-0"

5-Fixture Crossarm

3" Sched
40 pipe

4-Fixture Crossarm

CR3

CR2

7'-0"

4'-0"

3" Sched
40 pipe
3" Sched
40 pipe
3'-0"

3'-0"

3-Fixture Crossarm

508

Outdoor / PSG8

2-Fixture Crossarm

www.lithonia.com

Pole Options

Anchor Bolts

Horizontal Arm Bracket

Available in various sizes for use with Lithonia poles. Set includes hex nuts and
washers. Anchor bolt is partially galvanized for exposed threads per ASTMA153. Bolts have minimum-yield strength rating of 55,000 psi, AASHTO M314
GR55. See individual pole catalog pages for anchor bolt sizes and description.

Single or twin side-mounted horizontal arm brackets for additional luminaires.
Made from 23/8" pipe. Upright is 18" from pole; special arm lengths may be
available upon request. Arms are rated for luminaires up to 4.5 sq. ft. EPA and
100 lbs. per arm. When ordering, specify location in height and feet above base
of pole and orientation from the hand hole.

Option

EPA
Material

Weight
(sq. ft.)

(lbs.)

.43
.50
.45
.55

7
11
8
9

-

HA

Base Covers
Two-piece, full-base cover. Four fasteners provided to secure pieces together.
Finished to match pole. Shipped separately. Standard with steel poles only.

Option

Pole

SBC4
SBC5
SBC6

SSS 4"
SSS 5"
SSS 6"

Aluminum
Steel
Fiberglass
Concrete

Note: SSS and SSA arm attachment is slightly different from RTA. Arm modifications located on pole to accept arms. Arms shipped as separate item.

Dimensions
(square) (depth)
8.75"
11.44"
13.5"

x
x
x

VD - Vibration Damper

5.8"
6.4"
4"

For full-base cover on other poles, must order FBC. When ordering separately,
specify full pole nomenclature; i.e., FBC for RTA 25 7E. Also specify if pole is existing.

Festoon Outlets
Provision provided for mounting duplex outlet. When ordering, specify location
in height and feet above base of pole and orientation from the hand hole.

It has been found that low steady winds sometimes
induce second mode vibration in lighting poles. Second mode vibration is characterized by the maximum
periodic motion occuring at approximately the midheight of the pole. This type of vibration can result in
failure of the pole and/or luminaire. There is no method
of predicting destructive light pole vibration.

Handhole Opening
Field Installed
Vibration Dampener

Note: FVD - Field installable vibrator damper available
upon request. Consult factory.

Foundation

Option Description
FDL

Festoon Duplex Outlet, Less Electric

Hand-hole Cover Plates

Nut Covers
Four nut covers are standard for RSA and RTA
poles only.

SSS HHC: For all SSS poles
All other poles order as hand-hole cover for full
pole description. Also specify if pole is existing.

Bolt on Tenon Square Steel Poles

Tenon Dimensions
Tenon Mounting Slipfitters

(Order separately)
Number of fixtures

Tenon OD

One

Two@180°

Two@90°

23/8"
27/8"

T20-190
T25-190
T35-190

T20-280
T25-280
T35-280

T20-290
T25-290
T35-290

4"

Three@120° Three@90°

T20-320
T25-320
T35-320

T20-390
T25-390
T35-390

Four@90°

T20-490
T25-490
T35-490

Cat. No.

A

B

C

D

Wt. (lbs.)

SBT-4S
SBT-5S
SBT-6S

2 / 8"
2 3 / 8"
2 3 / 8"

3"
4"
5"

13 / 4"
133/ 4"
133/ 4"

5"
5"
5"

7
8
17

3

3

Couplings & Nipples

A

D

C

Threaded couplings and/or nipples can be factory installed. When ordering,
specify location in height and feet above base of pole and orientation from
the hand hole.
12CP
34CP
1CP

1/2"
3/4"

1"

threaded coupling
threaded coupling
threaded coupling

12NP
34NP
1NP

1/2"
3/4"

1"

threaded nipple
threaded nipple
threaded nipple

B

Tamperproof
Threaded
Coupling

Threaded
Nipple

Tamperproof (TP): Order as TP. Tamperproof screws provided with base cover.

www.lithonia.com

Outdoor / PSG8

509

Pole Options

Pole Orientation

The orientation from the hand hole and
location from the pole base must be specified when ordering the pole. The orientation from the hand hole is designated by
the pole sides A, B, C or D. The location on
the pole shaft is designated by the distance from the pole base.

Ordering Information

Example: HA12B

Options
HA
FDL
12CP
34CP
1CP
12NP
34NP
1NP
HH
PT
T20
T25
T30
T35

Horizontal arm
Festoon outlet- less electrical
1/ ” coupling
2
3/ ” coupling
4
1” coupling
1/ ” threaded nipple
2
3/ ” threaded nipple
4
1” threaded nipple
Extra hand hole, 3 x 5 only
Open top
23/8” tenon
27/8” tenon
31/2” tenon
4” tenon

Height from
base (ft.)

Square

Round

C

C

Orientation
A

Determined by
application.

B

C

D

side of the pole with the hand
hole
side of the pole 90 degrees
counterclockwise from the
hand hole (right)
side of the pole 180 degrees
counterclockwise from the
hand hole (opposite)
side of the pole 270 degrees
counterclockwise (or 90
degrees clockwise) from the
hand hole (left)

D

B

D

B

Hand Hole

Hand Hole

A

A

See the following examples:
1.

SSS 25 5G with one arm-mount fixture and two
floodlights on horizontal arm brackets. Floodlights are to be 180 degrees from each other,
90 degrees from the shoebox and 12 feet above
the base.
Order as: SSS 25 5G DM19 HA12A HA12C

2.

RTA 30 8G with two arm-mount fixtures at 180
degrees, one floodlight on a horizontal arm
bracket and a ½” coupling. Floodlight is to be
opposite hand hole and 6 feet from top of pole.
Coupling should be 10 feet from top, same side
as floodlight.

3.

SSS 20 4C with a 23/8” tenon and festoon outlet
90 degrees left of the hand hole, 5 feet above
the base.
Order as: SSS 20 4C T20 FDL5D

Order as: RTA 30 8G HA24C 12CP20C

Drill Mounting Options1

DM19AS
DM19

DM28AS
DM28

DM29AS
DM29

DM32AS 2
DM32

2

NOTES:
1 AS denotes Aeris luminaire.
2 Available with round pole only.
3 Available with square pole only.

510

Outdoor / PSG8

www.lithonia.com

DM39AS 3
3

DM39

DM49AS
DM49

Pole Options

Aluminum Mounting Brackets
Bullhorns and Spokes — order as separate items.

Projected area is for bracket only. Bracket
projected area is added to luminaire projected area to get total effective projected
area (EPA). All brackets have a luminaire

rating per tenon of 4.5 sq. ft. projected area
and 100 lbs. at a wind velocity of 100 mph
(luminaire drag coefficient = 1.0).

Brackets for Aluminum Poles Only
Finish — Natural aluminum. Optional painted finishes available. Plastic cap supplied.
Round Pole
RBA28

Brackets mount to T25 tenon 2-7/8" OD.

RBA32

RBA38

18'
18'
Catalog
Number

EPA
(sq. ft.)

Weight
(lbs.)

RBA28
RBA32
RBA38
RBA48
RBA49

1.2
1.7
1.9
2.7
2.2

7.0
14.3
10.5
14.5
17.5

RBA48

RBA49

Brackets for Aluminum Poles Only
Finish — Natural aluminum. Optional painted finishes available. Plastic cap supplied.
Square Pole

SBA38

SBA49

Brackets flush mount on 4", 5" and 6" square poles.
For use with internal sleeve, plain open-top poles,
Lithonia Lighting poles only. Must be ordered with
pole to ensure proper fit.

Catalog
Number

EPA
(sq. ft.)

Weight
(lbs.)

SBA28
SBA38
SBA48
SBA49

0.90
1.50
2.25
1.7

12
17
22
22

SBA48

SBA28

15"

www.lithonia.com

Outdoor / PSG8

511

Pole Options

Steel Mounting Brackets
Bullhorns and Spokes — Order as separate items.

Projected area is for bracket only. Bracket
projected area is added to luminaire projected area to get total effective projected
area (EPA). All brackets have a luminaire

rating per tenon of 4.5 sq. ft. projected
area and 100 lbs. at a wind velocity of 100
mph (luminaire drag coefficient = 1.0).

Brackets for Steel Poles Only
Finish — Dark bronze, standard. Other colors available (consult factory). Plastic cap supplied.
Catalog
Number

EPA
(sq. ft.)

Weight
(lbs.)

BS28
BS32
BS38
BS48
BS49

1.0
1.3
1.6
2.3
1.6

21.0
34.0
32.0
44.0
44.0

Standard Hub
OD 2⁷⁄₈" – I.D. 2½"
Requires T20 Tenon (min. 5" tall)

BS28

BS38
30"

30"

Slipfitter for P2
T20 or T35

T20 or T35

BS32

BS48

BS49

Brackets for Square Steel Poles Only
Requires T20 (23/8" max OD) tenon on pole for mounting.

Finish — Dark bronze, standard.
SBS 38

SBS 28
Catalog
Number
SBS 28
SBS 38
SBS 49

EPA Weight
(sq. ft.)
(lbs.)
1.1
1.7
2.1

30.0
42.0
45.0

SBS 49
30"

30"

42"

30"

Tenon
4" x 2.375" Dia.
Removable
Front Cap

Tenon
4" x 2.375" Dia.

(4) 0.375"-16
Set Screws

Removable
Front Cap

(4) 0.375"-16
Set Screws

(4) 0.375"-16
Set Screws

512

Outdoor / PSG8

www.lithonia.com

Removable
Front Cap

Anchor Base Poles

Round Tapered Fiberglass

RTF
Anchor Base – Heavy-duty, A356-T6 aluminum base casting which is permanently bonded to the outside of the fiberglass shaft.
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of 5/8" or 1" diameter
steel rod having a minimum-yield strength
of 55,000 psi.
Hand hole – An oval, non-metallic,
2½"x5" hand hole secured with a vandalresistant, stainless steel ½" socket head
screw.

Features
Shaft – Constructed by the filament winding process from thermosetting polyester
resin and contains a minimum of 65 percent "E" type fiberglass by weight. The filament windings are continuously applied
with uniform tension and are placed on the
pole helically at low angles to provide
axial strength. Additional windings are
placed on the pole in a circular manner to
provide compressive strength.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

2

EPA (ft ) with 1.3 gust
Catalog

Nom.
mount.

Pole
shaft size

number

ht. (ft.)

(in. x in. x ft.)

mph mph mph

wt.

RTF 10 5-4X

10

5.4 x 4.1 x 10

19.0

14.6

11.4

150

8

5 8

/ x 21 x 3

23

RTF 12 5-6X

12

5.6 x 4.1 x 12

16.0

12.1

9.3

150

81/2

5 8

/ x 21 x 3

28

RTF 14 5-9X

14

5.9 x 4.1 x 14

14.0

10.4

7.9

150

81/2

5 8

/ x 21 x 3

32

RTF 16 6-1X

16

6.1 x 4.1 x 16

10.0

7.4

5.5

100

81/2

5 8

/ x 21 x 3

36

RTF 20 6-6X

20

6.6 x 4.1 x 20

8.2

5.8

4.1

100

91/2

5 8

/ x 21 x 3

45

RTF 20 7-3X

20

7.3 x 4.6 x 20

14.4

11.1

8.9

200

111/2

1 x 30 x 4

62

RTF 25 6-7X

25

6.7 x 4.1 x 25

5.4

3.4

2.0

100

91/2

1 x 30 x 4

55

RTF 25 7-3X

25

7.3 x 4.6 x 25

9.6

7.3

5.7

200

111/2

1 x 30 x 4

75

RTF 30 8-4X

30

8.4 x 4.6 x 30

11.2

8.5

6.7

100

111/2

1 x 30 x 4

106

RTF 30 8-5X

30

8.5 x 4.8 x 30

15.6

12.0

9.5

200

111/2

1 x 30 x 4

140

RTF 30 10-5X

30

10.5 x 6.6 x 30

28.7

22.4

17.4

300

141/2

1 x 30 x 4

202

RTF 35 8-4X

35

8.4 x 4.6 x 35

5.5

3.8

2.7

100

111/2

1 x 30 x 4

125

RTF 35 8-5X

35

8.5 x 4.8 x 35

8.5

6.2

4.7

200

111/2

1 x 30 x 4

161

RTF 35 11-2X

35

11.2 x 6.6 x 35

21.8

16.6

12.5

300

15

11/4 x 36 x 6

248

RTF 40 11-7X

40

11.7 x 6.2 x 40

6.4

4.3

2.4

165

151/2

11/4 x 36 x 6

165

RTF 40 11-8X

40

11.8 x 6.4 x 40

12.2

8.8

6.0

300

151/2

11/4 x 36 x 6

227

RTF 40 12X

40

12.0 x 6.9 x 40

25.8

19.3

14.3

300

151/2

11/4 x 36 x 6

317

RTF 45 11-7X

45

11.7 x 6.2 x 45

3.9

2.0

0.6

300

151/2

11/4 x 36 x 6

183

RTF 45 11-9X

45

11.9 x 6.6 x 45

15.2

10.9

7.6

300

151/2

11/4 x 36 x 6

295

80

90

100

Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof, high-strength
plastic cap provided with all drill-mount
poles.
Finish – The pole is ultraviolet-resistant
and pigmented approximately the same
color as the final polyurethane coating.
Dark bronze (DDB) is standard.

Bolt
Max. circle
(in.)

Bolt
size

Approx.
ship wt.

(in. x in. x in.)

(lbs.)

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

A

Pole Data
Shaft
base
size
5.4"
5.6"
5.9"
6.1"
6.6
6.7"
7.3"
8.4"
8.5"
10.5"
11.2
11.7"
11.8"
11.9"
12.0"

Bolt
circle
A
8"
8.5"
8.5"
8.5"
9.5"
9.5"
11.5"
11.5"
11.5"
14.5"
15"
15.5"
15.5"
15.5"
15.5"

Bolt
projection
B
3"
3"
3"
3"
3"
3"
4"
4"
4"
4"
4"
4"
4"
4"
4"

Base
square
C
7.75"
8.125"
8.125"
8.125"
8.8"
8.8"
11"
11"
11"
13.3"
13.5"
14"
14"
14"
14"

Anchor
bolt
Template
description number
ABRTF-5-4
PJ50108
ABRTF-5-6
PJ50109
ABRTF-5-9
PJ50110
ABRTF-6-1
PJ50111
ABRTF-6-6
PJ50112
ABRTF-6-7
PJ50113
ABRTF-7-3
PJ50114
ABRTF-8-4
PJ50115
ABRTF-8-5
PJ50116
ABRTF-10-5
PJ50117
ABRTF-11-2
PJ50118
ABRTF-11-7
PJ50119
ABRTF-11-8
PJ50120
ABRTF-11-9
PJ50121
ABRTF-12-0
PJ50122

www.lithonia.com
keyword: RTF

C

18"
B

Outdoor / PSG8

513

Direct Burial Poles

Round Tapered Fiberglass

RTFDB
Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof, high-strength
plastic cap provided with all drill-mount
poles.
Finish – Ultraviolet-resistant and pigmented approximately the same color as
the final polyurethane coating. Dark
bronze (DDB) is standard.

Features
Shaft – Constructed by the filament winding process from thermosetting polyester
resin and contains a minimum of 65 percent "E" type fiberglass by weight. The
filament windings are continuously applied with uniform tension and are placed
on the pole helically at low angles to provide axial strength. Additional windings
are placed on the pole in a circular manner to provide compressive strength.
Hand hole – An oval, non-metallic, 2½"x5"
hand hole secured with a vandal-resistant, stainless steel ¼" socket head
screw.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)
INSTALLATION NOTES:
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

EPA (ft2) with 1.3 gust
Catalog
number

Nom.
Pole
mount.
shaft size
ht. (ft.) (in. x in. x ft.)

100
mph

Max.
wt.

Approx.
ship wt.
(lbs.)

14

6.0 x 4.1 x 18

14.0

10.4

7.9

150

34

RTFDB 20 6-6X

16

6.6 x 4.1 x 20

10.0

7.4

5.5

100

38

RTFDB 24 6-7X

20

6.7 x 4.1 x 24

8.2

5.8

4.1

150

46

RTFDB 30 8-3X

25

8.3 x 4.4 x 30

6.2

4.7

3.6

100

71

RTFDB 30 8-4X

25

8.4 x 4.6 x 30

14.5

11.2

8.9

200

98

RTFDB 35 8-4X

30

8.4 x 4.6 x 35

10.5

8.0

6.2

200

116

RTFDB 35 8-5X

30

8.5 x 4.9 x 35

14.8

11.4

9.0

300

153

RTFDB 41 11-8X

35

11.8 x 6.4 x 41

14.3

10.8

7.8

300

218

18"
Finish Grade
2'
Wiring access

Outdoor / PSG8

90
mph

RTFDB 18 6X

Hand Hole

514

80
mph

www.lithonia.com
keyword: RTFDB

Anchor Base Poles

Square Straight Fiberglass

SSF
Hand hole – An oval, non-metallic, 2½" x 5"
hand hole secured with a vandal-resistant, stainless steel ¼" socket head
screw.

Features
Shaft – Constructed by the pultrusion process from thermosetting polyester resin
and contain a minimum of 65 percent "E"
type fiberglass by weight. The fiberglass
strands traverse the length of the pole.

Base Cover – Full base cover finished to
match pole.

Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof, high-strength
plastic cap provided with all drill-mount
poles.

Anchor Base – Heavy-duty, A356-T6 aluminum base casting is permanently
bonded to the outside of the fiberglass
shaft.

Finish – Ultraviolet-resistant and pigmented approximately the same color as
the final polyurethane coating. Dark

Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of 5/8" or 1" diameter
steel rod having a minimum-yield strength
of 55,000 psi.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust

Catalog
number

bronze (DDB) is standard.

Nom.
Pole
mount. shaft size
ht. (ft.) (in. x in. x ft.)

Bolt
Bolt
80
90
100 Max. circle
size
mph mph mph wt. (in.) (in. x in. x in.)

Approx.
ship wt.
(lbs.)

/ x 21 x 3

18

/ x 21 x 3

23

/ x 21 x 3

27

/ x 21 x 3

31

/ x 21 x 3

35

/ x 21 x 3

39

/ x 21 x 3

80

1 x 30 x 4

110

SSF 6 4X

6

4x4x6

23.2

17.9

14.2

150

8

5 8

SSF 8 4X

8

4x4x8

16.5

12.6

9.8

150

8

5 8

SSF 10 4X

10

4 x 4 x 10

12.0

8.9

6.7

150

8

5 8

SSF 12 4X

12

4 x 4 x 12

9.1

6.5

4.6

100

8

5 8

SSF 14 4X

14

4 x 4 x 14

6.7

4.4

2.8

100

8

5 8

SSF 16 4X

16

4 x 4 x 16

3.7

2.2

1.1

100

8

5 8

SSF 20 4X

20

4 x 4 x 20

7.2

1.8

0.5

150

8

5 8

SSF 20 5X

20

5 x 5 x 20

12.2

9.1

6.9

200

11

SSF 25 4X

25

4 x 4 x 25

4.2

2.5

0.75

150

8

SSF 25 5X

25

5 x 5 x 25

8.7

6.2

4.4

200

11

SSF 30 5X

30

5 x 5 x 30

4.7

2.8

1.9

200

11

SSF 30 5XHD

30

5 x 5 x 30

8.6

5.1

2.6

200 10-12

Shaft
base
size

Bolt
circle
A

Bolt
projection
B

Base
square
C

Anchor
bolt
description

Template
number

4"
5"

8"
11"

3"
4"

7.4"
11.1"

ABSSF-4
ABSSF-5

PJ50123
PJ50124

/ x 21 x 3

90

1 x 30 x 4

115

5 8

1 x 30 x 4

120

1 x 30 x 4

164

INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

NOTES:
1 Mounting arrangement: (PT) Open Top; (T20) 23/8" OD (2"
NPS)
2 Drill mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures
at 180°
3 Options: See page 509.
4 Brackets: See page 511.

Pole Data

SSF 4" SHAFT

SSF 5" SHAFT

A

A

13

C

/16" dia. hole

B

11/4" x 2" slot

C
www.lithonia.com
keyword: SSF

Outdoor / PSG8

515

Anchor Base Poles

Round Tapered Concrete

RTCD
Features

NEW

Construction – Centrifugal, pre-stressed
concrete with a minimum 28-day compressive strength of 7000 PSI and conform with
ASTM C-150. Prestressing wire reinforcement shall conform to ASTM A-421 and the
spiral wire shall conform to ASTM A-82.
The spiral reinforcement shall not be less
than 13 gauge. The reinforcement continues from the top of the pole over the entire length. The concrete coverage over

the reinforcement spiral is ½" thick. The
raceway opening is 2 inches minimum for
wiring. Nominal hand hole size of
2.225”x7”. Ground wire runs from top of
pole to hand hole.
Finish – Concrete shall be color throughout acrylic coating.
Anchor Bolts - Top portion of anchor bolt
is galvanized per ASTM A-153. Made of
steel rod having minimum yield strength of
55,000 PSI.

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

Technical Information
Catalog
number

Pole
height
"A"

Base OD

Anchor
bolt

Bolt
circle

Base
plate
(sq.)

Ultimate
GL moment
(ft. lbs.)

Weight
(lbs.)

80

90

100

19'-8"

1

8 /4"

1" x 36" x 4"

1

RTCD 20 8-25X
RTCD 25 8-06X

11 /2"

11"

20,100

600

12.0

11.0

10.0

24'-7"

81/16"

1" x 36" x 4"

111/2"

11"

19,910

750

12.0

9.0

6.5

RTCD 30 8-62X

29'-6"

85/8"

1" x 36" x 4"

111/2"

11"

22,540

920

10.0

7.0

5.0

RTCD 35 9-31X

34'-9"

5

9 /16"

1" x 36" x 4"

14"

13"

37,500

1,200

12.0

10.0

8.0

42'-8"

15

1" x 36" x 4"

16 /2"

16"

51,050

2,100

12.0

8.0

5.0

RTCD 43 11-31X

11 /16"

1

*EPA based on post top mounting. Consult your representative for other attachment methods and increased load capacity requirements.

C

D

B

18”

A
Hand hole

516

Outdoor / PSG8

www.lithonia.com
keyword: RTCD

Anchor Base Poles

Round Tapered Concrete

RTCDDB
Features
Construction – Centrifugal, pre-stressed
concrete with a minimum 28-day compressive strength of 7000 PSI and conform with
ASTM C-150. Prestressing wire reinforcement shall conform to ASTM A-421 and the
spiral wire shall conform to ASTM A-82.
The spiral reinforcement shall not be less
than 13 gauge. The reinforcement continues from the top of the pole over the entire length. The concrete coverage over

the reinforcement spiral is ½" thick. The
raceway opening is 2 inches minimum for
wiring. Nominal hand hole size of
2.225”x7”. Ground wire runs from top of
pole to hand hole.
Finish – Concrete shall be color throughout acrylic coating.

NEW

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

Technical Information
Catalog
number

Pole
height
"A"

Base OD

Embedded
depth

Overall
length

Ultimate
GL moment
(ft. lbs.)

Weight
(lbs.)

RTCDDB 20 8-00X

80

90

100

19'-8"

8"

4' - 11'

24'-7"

17,440

750

13.0

11.0

10.0

RTCDDB 25 8-56X

24'-7"

89/16"

4' - 11'

29'-6"

19,910

850

12.0

9.0

6.5

1

RTCDDB 30 9-25X

29'-6"

9 /4"

5' - 3'

34'-9"

22,540

1,200

10.0

7.0

5.0

RTCDDB 35 11-93X

36'-0"

1115/16"

6' - 8'

42'-8"

42,200

2,100

12.0

10.0

8.0

RTCDDB 43 13-33X

42'-8"

13"

6' - 5'

49'-2"

49,300

2,850

12.0

8.0

5.0

*EPA based on post top mounting. Consult your representative for other attachment methods and increased load capacity requirements.

18”

Ground Line

18”

www.lithonia.com
keyword: RTCDDB

Outdoor / PSG8

517

Direct Burial Poles

Square Tapered Concrete

STC
Features
Shaft – Concrete mix has a minimum 28day compressive strength of 6,500 PSI
and conforms with ASTM-C150. Prestressing steel reinforcement is uncoated 7 wire, stress relieved strand per
ASTM-A416. Steel spiral reinforcement
conforms to ASTM-A82 and is not less
than .120 (11-gauge) diameter. Poles
have a continuous taper of 0.165 inches
per foot.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

EPA (ft2) with 1.3 gust
Nom.
mount.
ht. (ft.)

Pole
shaft size
(in. x in. x ft.)

80
mph

STC 20 7-24X

16

4.0 x 7.24 x 20

22

550

STC 20 9-24X

16

6.0 x 9.24 x 20

48

1,220

STC 25 8-05X

20

4.0 x 8.05 x 25

21

510

STC 25 10-05X

20

6.0 x 10.05 x 25

44

1,050

STC 30 8-86X

25

4.0 x 8.86 x 30

20

460

STC 30 10-86X

25

6.0 x 10.86 x 30

49

1,090

STC 35 9-67X

29

4.0 x 9.67 x 35

17

400

12

STC 35 11-67X

29

6.0 x 11.67 x 35

43

1,010

32

STC 40 12-48X

34

6.0 x 12.48 x 40

42

920

30

STC 45 13-29X

38

6.0 x 13.29 x 45

41

820

31

Catalog
number

INSTALLATION NOTES:
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

3" x 5" hand
hole with cover
Finish grade
24"
18"
Cast in 11/2" hole
@ 45°
Pigtail

518

Outdoor / PSG8

Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof top cap provided
with all drill-mount poles.
Finish – Smooth, natural form finish, soft
gray color is standard.

Hand hole – A 3"x5" hand hole is located
24" above ground line and a 2½" x 7" minimum conduit entrance is located 18" below ground line. Inserts for the hand hole
and conduit entrance are non-corrosive
and weatherproof. Hand-hole frames and
covers conform to ASTM-B240.
Grounding – An 18" long, #4 stranded copper pigtail, connected to reinforced
strand, is provided at pole top and at
cable entrance below grade.

www.lithonia.com
keyword: STC

Max
wt.

90
mph

Approx.
ship wt.
(lbs.)

Max
wt.

100
mph

Max.
wt.

16

430

13

330

680

37

950

29

760

1,110

16

390

12

300

985

34

810

26

640

1,530

15

340

11

250

1,350

33

830

28

650

2,000

290

8

200

1,800

760

24

580

2,540

670

22

500

3,130

590

22

420

3,795

Direct Burial Poles

Round Tapered Concrete Sportslighting

SPRTC
Features
Shaft – Concrete mix has a minimum 28day compressive strength of 11,000 PSI
and conforms with ASTM-C150. Prestressing steel reinforcement is uncoated 7 wire,
stress relieved strand per ASTM-A416.
Steel spiral reinforcement conforms to
ASTM-A82 and is not less than .203 (5gauge wire) diameter. Poles have a continuous taper of 0.216 inches per foot.
Poles are centrifugally spun and round in
cross-section with a hollow center.

Hand hole – 4"x8" hand hole is located 24"
above ground line. 4"x8" conduit entrance
is located 18" below ground line. 2½"x8" reinforced hand hole with flush cover is located at cage/crossarm locations. 1½"
coupling wire inlet/outlet is located opposite this hand hole. Inserts for hand hole
and conduit entrance are non-corrosive
and weatherproof. Hand-hole frames and
covers conform to ASTM-B240.
Grounding – A continuous solid or stranded
copper ground wire is cast into the pole.

Technical Information

Ordering Information: See page 494
(Note: Poles are available only in U.S.)

2

EPA (ft ) with 1.3 gust
Nom.
mount.
ht. (ft.)

Pole
shaft size
(in. x in. x ft.)

SPRTC C6 45 7-17

38

6.75 X 16.47 X 45

31

620

24

480

18

360

3,400

SPRTC C5 45 7-17

38

6.75 X 16.47 X 45

39

780

30

600

23

460

3,400

Catalog
number

Wire terminates at top of pole to accept a
½"x24" lightning rod and approximately 12"
below grade. Copper coupling provides a ½"
tapped insert at pole face for grounding
hardware.
Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Finish – Smooth, natural form finish, soft
gray color is standard.

80 Max 90 Max 100 Max.
mph wt. mph wt. mph wt.

Approx.
ship wt.
(lbs.)

SPRTC C4 45 7-17

38

6.75 X 16.47 X 45

52

1,040

40

800

31

589

3,450

SPRTC C4 60 7-20

50

6.75 X 19.71 X 60

47

893

35

665

26

520

5,450

1,615

65

SPRTC C2 60 9-22

50

8.82 X 21.78 X 60

85

1,235

48

912

7,950

SPRTC H1 60 9-22

50

8.82 X 21.78 X 60

138 2,622 101 1,919

80

1,520

8,100

SPRTC C3 70 9-24

60

8.82 X 23.94 X 70

56

1,064

42

798

32

608

9,900

SPRTC C1 70 9-24

60

8.82 X 23.94 X 70

90

1,710

69

1,311

52

988

10,100
10,400

SPRTC H2 70 10-24

60

8.82 X 23.94 X 70

139 2,641 103 1,957

81

1,539

SPRTC C2 80 9-26

68

8.82 X 26.1 X 80

63

1,197

45

855

34

646

12,300

SPRTC C1 80 9-26

68

8.82 X 26.1 X 80

85

1,445

65

1,105

48

816

12,300
12,800

SPRTC H2 80 10-26

68

8.82 X 26.1 X 80

136 2,584 101 1,919

79

1,501

SPRTC C2 90 9-28

77

8.82 X 28.26 X 90

54

1,026

39

741

28

532

14,850

SPRTC C1 90 9-28

77

8.82 X 28.26 X 90

78

1,482

56

1,064

42

798

14,950
15,350

SPRTC H2 90 10-28

77

8.82 X 28.26 X 90

132 2,508

97

1,843

75

1,425

SPRTC C1 105 9-32

91

8.82 X 31.5 X 105

70

1,330

49

931

35

665

19,250

SPRTC H1 105 9-32

91

8.82 X 31.5 X 105

99

1,881

74

1,406

54

1,026

19,450
22,050

SPRTC H3 105 11-34

91

11.0 X 33.68 X 105

144 2,736 105 1,995

80

1,520

SPRTC C1 115 9-34

100

8.82 X 33.66 X 115

65

1,235

45

855

31

589

22,350

SPRTC H1 115 9-34

100

8.82 X 33.66 X 115

96

1,824

70

1,330

50

950

22,550

SPRTC H2 115 10-34

100

8.82 X 33.66 X 115

125 2,375

91

1,729

69

1,311

22,800

24"

INSTALLATION NOTES:
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.

Cast in 4" x 8" hand-hole
frame and cover

/2" ground
coupling
1

18"
Cast in 4" x 8" slot

www.lithonia.com
keyword: SPRTC

Outdoor / PSG8

519

SPRTC Crossarm Options

Round Tapered Concrete Sportslighting Poles

Angle Iron Crossarms for Concrete Poles
Projected area is for the crossarm only. The crossarm projected area is added to
the luminaire projected area to get a total effective projected area (EPA).

Angle Iron Crossarms for Concrete Poles

ACRCW6
Catalog
Number

Arm EPA
(sq. ft.)

Weight
(lbs.)

ACRCW2

1.80

50.0

ACRCW3

3.00

86.0

ACRCW4

4.50

121.0

ACRCW5

5.70

157.0

ACRCW6

7.00

193.0

Pole and mounting hardware
see note
3.5" x 5.0" x 0.25" angle

2'-6"

13'-6"

6'-9"
6.5"

6-Fixture Angle Arm

ACRCW5

ACRCW4

Pole and mounting
hardware 1

Pole and mounting
hardware 1
3.5" x 5.0" x 0.25" angle

3.5" x 5.0" x 0.25" angle

2'-6"
11'-0"

2'-6"

6.0"
8'-6"

4'-3"
6.5"

4'-3"
6.5"

5-Fixture Angle Arm

4-Fixture Angle Arm

ACRCW3

ACRCW2

Pole and mounting
hardware 1

Pole and mounting
hardware 1

3.5" x 5.0" x 0.25" angle
6.0"

2'-6"

6'-0"

3.5" x 5.0" x 0.25" angle

6.0"

3'-6"

1'-9"
6.5"

2-Fixture Angle Arm

NOTES:
1 Connecting hardware for crossarm to pole is supplied
by others. Bolt holes in c-channel are 0.88" diameter.

Outdoor / PSG8

1'-9"
6.5"

3-Fixture Angle Arm

520

6.0"

www.lithonia.com

6.0"

SPRTC Crossarm Options

Round Tapered Concrete Sportslighting Poles

Pre-wired Tubular Crossarms for Concrete Poles
Projected area is for the crossarm only. The crossarm projected area is added to the
luminaire projected area to get a total effective projected area (EPA).
Use in conjunction with CV3P luminaire option.
Pre-wired Tubular Crossarms for
Concrete Poles
Catalog
Number

EPA
(sq. ft.)

Weight
(lbs.)

SPXCW2

1.00

23.5

SPXCW3

1.80

40.0

SPXCW4

2.50

56.5

SPXCW5

3.20

73.0

SPXCW6

3.90

89.5

SPXCW6
Pole and mounting
hardware 1
2.5" Sched. 40 pipe
Gusset
(2.88" OD)
(4 places)
13'-6"
6'-9"

6.5"

6-Fixture Crossarm

SPXCW4

SPXCW5

Pole and mounting
hardware 1

Pole and mounting
hardware 1
2.5" Sched. 40 pipe
(2.88" OD)

Gusset
(4 places)

2'-6"

11'-0"
6.5"

6.0"

2.5" Sched. 40
pipe (2.88" OD)

2'-6"

8'-6"
6.5"

6.0"

4'-3"

4-Fixture Crossarm

SPXCW3

SPXCW2

Pole and mounting
hardware 1

Pole and mounting
hardware 1

Gusset (4 places)
2'-6"

6'-0"

Gusset
(4 places)

4'-3"

5-Fixture Crossarm

2.5" Sched.
40 pipe
(2.88" OD)

6.0"

2'-6"

6.0"

2.5" Sched. 40
pipe (2.88" OD)

Gusset
(4 places)

6.0"

3'-6"

1'-9"
6.5"

3-Fixture Crossarm

1'-9"
6.5"

2-Fixture Crossarm

NOTES:
1 Connecting hardware for crossarm to pole is supplied by
others. Bolt holes in c-channel are 0.88" diameter.

www.lithonia.com

Outdoor / PSG8

521



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:10:21 17:59:36Z
Modify Date                     : 2003:10:22 15:00:06-04:00
Subject                         : Hydrel intro pages rev
Page Count                      : 96
Creation Date                   : 2003:10:21 17:59:36Z
Mod Date                        : 2003:10:22 15:00:06-04:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : PJP02
Keywords                        : 
Metadata Date                   : 2003:10:22 15:00:06-04:00
Creator                         : PJP02
Title                           : Hydrel intro pages rev
Description                     : Hydrel intro pages rev

EXIF Metadata provided by EXIF.tools