84287 Catalog

: Pdf 84287-Catalog 84287-Catalog 662276 Batch5 unilog

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

1146-1147.qxp

12/16/2013

6L

7:01 PM

Page 1146

Champ® FMV LED Series
Floodlight Fixtures

• “No lights out” feature – if a single LED
fails, others will remain lit from other
drivers – minimum 50% output maintained
• Terminals – 3 x 6 sq. mm. for IEC version

The Champ FMV
LED Family
FMV LED Series Floodlights are designed
to provide full-spectrum, crisp, white light.
Five versions of the Champ FMV LED are
available, providing ideal solutions for a
wide range of applications.
FMV
Model

Equivalent MH
HID Lamp

Energy
Savings

FMV
FMV
FMV
FMV
FMV

100W-150W
150W-175W
175W-250W
250W-400W
400W

Up to
62%!

5L
7L
9L
11L
13L

Reduce operation and
maintenance costs
• Easy installation - compact modular fixture
attaches onto existing SFA6 and SWB6
• Energy-efficient technology – use up to 1/ 2
the power of standard HID luminaires
• Provides up to 60,000 hours rated life –
eliminates need for frequent lamp
replacement
• Contains no mercury or other hazardous
substances

Applications:

6L

• Five lumen outputs allow for installation
in numerous mounting heights
• Locations requiring continuous and
consistent light levels in extreme
ambient temperatures
• Areas requiring frequent on-and-off of
lights
• Where flammable vapors, gases,
ignitable dusts, fibers or flyings are
present; indoors or outdoors
• Where extremely corrosive, wet, dusty,
hot and/or cold conditions exist
• Type 4X, marine, wet locations, and
hose-down environments
• Indoor and outdoor area lighting in
plants, buildings, and parking areas
• Manufacturing plants; heavy industrial,
chemical, petrochemical or
pharmaceutical facilities; platforms;
loading docks; outdoor mounted general
area lighting

Drivers:
Model

5L - 13L
90-305 VAC, 50 / 60 Hz;
108-250 VDC
347 VAC Model
480 VAC Model

Standard
Option 1
Option 2

UL Listed & CSA Certified
IECEx / ATEX
Simultaneous Presence
Wet Location, Type 4X, IP66

Cl. I, Div. 2, Groups A, B, C, D
Cl. I, Zone 2
Cl. II, Groups E, F, G
Cl. III

Champ FMV LED Benefits:
Enhance safety and productivity
• Instant illumination and restrike
• Better visibility with crisp, white light
• Minimum T4 temperature rating – safely
operate in the most hazardous
environments and any non-hazardous
location
• Cold temperature operation / no warm-up
required

Electrical Ratings:

Reliable performance in any
environment
• Shock- and vibration-resistant solid-state
luminaires have no filaments or glass
components that could break – greatly
reduces the risk of premature failure
• Operating ambient -40°C to 55°C
• Dark sky friendly with optional visor

Certifications and
Compliances:
• DesignLights Consortium® approved for
select models (refer to Ordering Information
for details)
NEC and CEC
• Class I, Division 2, Groups A, B, C, D
• Class I, Zone 2
• Class II, Groups E, F, G
• Class III
• Simultaneous Presence
• Wet Locations, Type 4X, IP66
UL Standards
• UL844
• UL1598 Luminaires, UL1598A Marine
CSA Standard
• CSA C22.2 No. 137
IECEx/ATEX
• IECEx UL 11.0054X
• Ex nA nR IIC T4 Gc Tamb -30°C to +55°C
• Ex nA nR IIC T5 Gc Tamb -30°C to +40°C
• Ex tc IIIC T68°C Dc IP66 Tamb -30°C to 40°C
• DEMKO 12 ATEX 115535X
• Ex II 3 G Ex nA nR IIC T4 Gc Tamb -30°C to
+55°C
• Ex II 3 G Ex nA nR IIC T5 Gc Tamb -30°C to
+40°C
• Ex II 3 D Ex tc IIIC T68°C Dc IP66 Tamb
-30°C to +40°C
• CEPEL Ex-1956/10

FMV 5L

FMV 7L

Standard Materials:
• Housing – copper-free aluminum with
Corro-free™ epoxy powder coat
• Lens – shatter-resistant glass
• Gaskets – silicone
• External hardware – stainless steel
• Factory-sealed, no external seals
required

LED System:
• High brightness light emitting diode
(LED) arrays
• Color temperature: 3000K (CRI 82) and
5600K (CRI 65) options available
• Advanced heat sink design ensures LED
does not exceed manufacturer’s
temperature ratings across all specified
ambient conditions
• LM-80 reports available upon request

Options:
Description
Suffix
Fused (only applies to
UNV1 model, not available
for 347V or 480V;
NOT marine or cUL Listed)
(NEC version only) . . . . . . . . . . . S658
Two conduit/cable glands of
like thread installed . . . . . . . . . . S886

Accessories (Order
Separately):
Description
Bolt-on visor
(sold separately) . . . . . . . . . . . .
Bolt-on wire guard
(sold separately) . . . . . . . . . . . .
Floodlight slipfitter
(sold separately) . . . . . . . . . . . .
Slipfitter wall mount adapter
(sold separately) . . . . . . . . . . . .

FMV 9L

FMV 11L

FMV 13L

100-277V 50 / 60 Hz

Voltage Range, VAC

347 / 480V 60 Hz

Voltage Range, VDC

108-250

108-250

108-250

108-250

108-250

Input Power (Nom.)

64

89

121

149

179

Input Amps (Max.)

0.550

0.800

1.083

1.608

1.608

Power Factor

>0.85

>0.85

>0.85

>0.85

>0.85

1146

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

Cat. No.
DSV1
P61
SFA6
SWB6

1146-1147.qxp

12/16/2013

7:01 PM

Page 1147

Champ® FMV LED Series
Floodlight Fixtures

Cl. I, Div. 2, Groups A, B, C, D
Cl. I, Zone 2
Cl. II, Groups E, F, G
Cl. III

UL Listed & CSA Certified
IECEx / ATEX
Simultaneous Presence
Wet Location, Type 4X, IP66

Safe, reliable heat transfer

Installation and replacement made simple

The heat sink was designed to perform in
high ambient temperatures up to +55ºC and
as low as -40ºC. The thick walls of the
castings make for a tough, rugged housing
that keeps the internal driver and LED
temperatures down, allowing them to
perform flawlessly, and protects them from damage. Separated driver
and LED housing allows dust to shed from fixture.

The full-frame yoke was designed to utilize the SFA6 slipfitter
and SWB6 wall mount bracket (sold separately), making it
ideal for retrofit or new installations. The modular design of
the FMV LED allows for easy driver or LED replacement, and
allows for the addition of the optional visor or guard in the
field. Single cable gland provided with a second plugged
cable entry, if an additional cable gland is needed.

6L

High efficiency and lumen output
High efficiency drivers and LED arrays provide
reliable low cost operation in harsh and
hazardous environments. Components were
chosen to give industry-leading light output from
an LED flood. Replaceable drivers and LEDs for
ease of maintenance and “no lights out” feature.

6L

Versatile design
Suitable for hazardous location use in gas
or dust areas. Can be used for outdoor or
indoor applications, and for a wide range of
mounting heights depending on model and
light level requirement. Optics were
specifically designed to give the familiar
and industry-accepted butterfly beam light
pattern.

www.crouse-hinds.com

Optional equipment
Cool (C) and Warm (W) white color temperatures available.
Optional visor offered (sold separately) to control light spill.
Optional wire guard offered (sold separately) to protect lens from damage.
Other options available - consult part numbering guide.

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

1147

1148-1149.qxp

12/16/2013

6L

7:43 PM

Page 1148

Champ® FMV LED Series
Floodlight Fixtures

Cl. I, Div. 2, Groups A, B, C, D
Cl. I, Zone 2
Cl. II, Groups E, F, G
Cl. III

UL Listed & CSA Certified
IECEx / ATEX
Simultaneous Presence
Wet Location, Type 4X, IP66

Catalog Numbering System:
SERIES

LIGHT
SOURCE

COLOR

MOUNT

VOLTAGE

OPTICAL
DISTRIBUTION

SUFFIXES

FMV

9L

C

Y

/UNV1

76

S658

SERIES
FMV
NFMV

NEC version with Class/Division ratings
IEC version with Class/Zone ratings

LIGHT SOURCE / INTENSITY
5L
7L
9L
11L
13L

100W - 150W equivalent
150W - 175W equivalent
175W - 250W equivalent
250W - 400W equivalent
400W equivalent

COLOR TEMPERATURE
C
W

5600K (cool white)
3000K (warm white)

MOUNT
Y

Yoke

VOLTAGE
/UNV1
/120
/347
/480

100 VAC to 277 VAC 50/60 Hz, 108 VDC to 250 VDC
120 VAC 50/60 Hz**
347 VAC 60 Hz
480 VAC 60 Hz

OPTICAL DISTRIBUTION
76

Floodlight pattern optics included

ADDITIONAL ITEMS (SOLD SEPARATELY)

6L

SUFFIXES
M20
M25
S658
S886

DSV1
P61
SFA6
SWB6

20mm metric threads for conduit opening (NFMV only)*
25mm metric threads for conduit opening (NFMV only)*
Fused; for UNV1 only; not for marine or cUL
Two conduit/cable glands of like thread installed

DSV dark sky visor
Wire guard factory installed
Floodlight slipfitter
Slipfitter wall mount adapter

*Required for NFMV. Please specify conduit entry.
**5 year limited warranty. Refer to page 2 of the D-0413 authorized distributor price book for Eaton’s Crouse-Hinds standard Terms and Conditions.
DesignLights Consortium® approved models. Cool white only.

Dimensions:
[532.9]
21.0

[167.1]
6.6

[552.5]
21.75

[405.9]
16.0

[120.7]
4.75
1148

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

[14]
Ø.55

1148-1149.qxp

12/16/2013

7:43 PM

Page 1149

Champ® FMV LED Series
Floodlight Fixtures

Cl. I, Div. 2, Groups A, B, C, D
Cl. I, Zone 2
Cl. II, Groups E, F, G
Cl. III

UL Listed & CSA Certified
IECEx / ATEX
Simultaneous Presence
Wet Location, Type 4X, IP66

6L

Photometric Data:
FMV 13L @ 40 Ft. High; Tilt Angle = 45 Degrees
(Isofootcandles)

Point By Point FC Readings

Distance in Feet

.35 Fc

.5 Fc

1 Fc

2 Fc

2.5 Fc

MULTIPLIERS FOR OTHER LED FLOODLIGHTS
Luminaire
Series

Wattage

Lumens*

FMV 5L

64

4386

FMV 7L

89

6720

FMV 9L

121

8478

FMV 11L

149

10420

*FMV 13L output is 12,940.

6L

Weights:
Model

Lbs.

Kg.

5L
7L
9L
11L
13L

39.11
39.16
39.73
40.35
40.35

17.74
17.76
18.02
18.30
18.30

Ambient Temperature:
FMV 5L
FMV 7L
FMV 9L
FMV 11L
FMV 13L

Max. Temp. ºC

Cl. I, Div. 2

Cl. I, Zone 2

Simu. Presence Div. 1 and Div. 2

Cl. II, Div. 1

Cl. III

40

T3C

T5

T3A

T5

T5

55

T3C

T4

-

-

-

40

T3C

T5

T3A

T5

T5

55

T3C

T4

-

-

-

40

T3C

T5

T3A

T5

T5

55

T3C

T4

-

-

-

40

T3C

T5

T3A

T5

T5

55

T3C

T4

-

-

-

40

T3C

T5

T3A

T5

T5

55

T3C

T4

-

-

-

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

1149



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2014:02:12 10:07:18-05:00
Create Date                     : 2014:02:10 15:38:46-05:00
Metadata Date                   : 2014:02:12 10:07:18-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Creator                         : mabe
Document ID                     : uuid:9b2c706b-72da-4574-9a32-65adc77a63ee
Instance ID                     : uuid:ab672ac1-1ce5-488a-96a0-e20d6ea30ab8
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 4
Author                          : mabe
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Title                           : 
Trapped                         : False

EXIF Metadata provided by EXIF.tools