84287 Catalog

2014-07-05

: Pdf 84287-Catalog 84287-Catalog 662276 Batch5 unilog

Open the PDF directly: View PDF .
Page Count: 4

1146

6L Champ®FMV LED Series

Floodlight Fixtures

Cl. I, Div. 2, Groups A, B, C, D

Cl. I, Zone 2

Cl. II, Groups E, F, G

Cl. III

UL Listed & CSA Certified

IECEx / ATEX

Simultaneous Presence

Wet Location, Type 4X, IP66

The Champ FMV

LED Family

FMV LED Series Floodlights are designed

to provide full-spectrum, crisp, white light.

Five versions of the Champ FMV LED are

available, providing ideal solutions for a

wide range of applications.

FMV

Model

Equivalent MH

HID Lamp

Energy

Savings

FMV 5L 100W-150W

Up to

62%!

FMV 7L 150W-175W

FMV 9L 175W-250W

FMV 11L 250W-400W

FMV 13L 400W

Applications:

• Five lumen outputs allow for installation

in numerous mounting heights

• Locations requiring continuous and

consistent light levels in extreme

ambient temperatures

• Areas requiring frequent on-and-off of

lights

• Where flammable vapors, gases,

ignitable dusts, fibers or flyings are

present; indoors or outdoors

• Where extremely corrosive, wet, dusty,

hot and/or cold conditions exist

• Type 4X, marine, wet locations, and

hose-down environments

• Indoor and outdoor area lighting in

plants, buildings, and parking areas

• Manufacturing plants; heavy industrial,

chemical, petrochemical or

pharmaceutical facilities; platforms;

loading docks; outdoor mounted general

area lighting

Champ FMV LED Benefits:

Enhance safety and productivity

• Instant illumination and restrike

• Better visibility with crisp, white light

• Minimum T4 temperature rating – safely

operate in the most hazardous

environments and any non-hazardous

location

• Cold temperature operation / no warm-up

required

• “No lights out” feature – if a single LED

fails, others will remain lit from other

drivers – minimum 50% output maintained

• Terminals – 3 x 6 sq. mm. for IEC version

Reduce operation and

maintenance costs

• Easy installation - compact modular fixture

attaches onto existing SFA6 and SWB6

• Energy-efficient technology – use up to 1/2

the power of standard HID luminaires

• Provides up to 60,000 hours rated life –

eliminates need for frequent lamp

replacement

• Contains no mercury or other hazardous

substances

Reliable performance in any

environment

• Shock- and vibration-resistant solid-state

luminaires have no filaments or glass

components that could break – greatly

reduces the risk of premature failure

• Operating ambient -40°C to 55°C

• Dark sky friendly with optional visor

Standard Materials:

• Housing – copper-free aluminum with

Corro-free™ epoxy powder coat

• Lens – shatter-resistant glass

• Gaskets – silicone

• External hardware – stainless steel

• Factory-sealed, no external seals

required

LED System:

• High brightness light emitting diode

(LED) arrays

• Color temperature: 3000K (CRI 82) and

5600K (CRI 65) options available

• Advanced heat sink design ensures LED

does not exceed manufacturer’s

temperature ratings across all specified

ambient conditions

• LM-80 reports available upon request

Options:

Description Suffix

Fused (only applies to

UNV1 model, not available

for 347V or 480V;

NOT marine or cUL Listed)

(NEC version only) . . . . . . . . . . . S658

Two conduit/cable glands of

like thread installed . . . . . . . . . . S886

Electrical Ratings:

FMV 5L FMV 7L FMV 9L FMV 11L FMV 13L

Voltage Range, VAC 100-277V 50 / 60 Hz

347 / 480V 60 Hz

Voltage Range, VDC 108-250 108-250 108-250 108-250 108-250

Input Power (Nom.) 64 89 121 149 179

Input Amps (Max.) 0.550 0.800 1.083 1.608 1.608

Power Factor >0.85 >0.85 >0.85 >0.85 >0.85

Drivers:

Model 5L - 13L

Standard 90-305 VAC, 50 / 60 Hz;

108-250 VDC

Option 1 347 VAC Model

Option 2 480 VAC Model Accessories (Order

Separately):

Description Cat. No.

Bolt-on visor

(sold separately) . . . . . . . . . . . . DSV1

Bolt-on wire guard

(sold separately) . . . . . . . . . . . . P61

Floodlight slipfitter

(sold separately) . . . . . . . . . . . . SFA6

Slipfitter wall mount adapter

(sold separately) . . . . . . . . . . . . SWB6

Certifications and

Compliances:

• DesignLights Consortium®approved for

select models (refer to Ordering Information

for details)

NEC and CEC

• Class I, Division 2, Groups A, B, C, D

• Class I, Zone 2

• Class II, Groups E, F, G

• Class III

• Simultaneous Presence

• Wet Locations, Type 4X, IP66

UL Standards

• UL844

• UL1598 Luminaires, UL1598A Marine

CSA Standard

• CSA C22.2 No. 137

IECEx/ATEX

• IECEx UL 11.0054X

• Ex nA nR IIC T4 Gc Tamb -30°C to +55°C

• Ex nA nR IIC T5 Gc Tamb -30°C to +40°C

•

Ex tc IIIC T68°C Dc IP66 Tamb -30°C to 40°C

• DEMKO 12 ATEX 115535X

• Ex II 3 G Ex nA nR IIC T4 Gc Tamb -30°C to

+55°C

• Ex II 3 G Ex nA nR IIC T5 Gc Tamb -30°C to

+40°C

• Ex II 3 D Ex tc IIIC T68°C Dc IP66 Tamb

-30°C to +40°C

• CEPEL Ex-1956/10

1146-1147.qxp 12/16/2013 7:01 PM Page 1146

1147

Safe, reliable heat transfer

The heat sink was designed to perform in

high ambient temperatures up to +55ºC and

as low as -40ºC. The thick walls of the

castings make for a tough, rugged housing

that keeps the internal driver and LED

temperatures down, allowing them to

perform ﬂawlessly, and protects them from damage. Separated driver

and LED housing allows dust to shed from ﬁxture.

Versatile design

Suitable for hazardous location use in gas

or dust areas. Can be used for outdoor or

indoor applications, and for a wide range of

mounting heights depending on model and

light level requirement. Optics were

speciﬁcally designed to give the familiar

and industry-accepted butterﬂy beam light

pattern.

High efﬁciency and lumen output

High efﬁciency drivers and LED arrays provide

reliable low cost operation in harsh and

hazardous environments. Components were

chosen to give industry-leading light output from

an LED ﬂood. Replaceable drivers and LEDs for

ease of maintenance and “no lights out” feature.

Installation and replacement made simple

The full-frame yoke was designed to utilize the SFA6 slipﬁtter

and SWB6 wall mount bracket (sold separately), making it

ideal for retroﬁt or new installations. The modular design of

the FMV LED allows for easy driver or LED replacement, and

allows for the addition of the optional visor or guard in the

ﬁeld. Single cable gland provided with a second plugged

cable entry, if an additional cable gland is needed.

Optional equipment

Cool (C) and Warm (W) white color temperatures available.

Optional visor offered (sold separately) to control light spill.

Optional wire guard offered (sold separately) to protect lens from damage.

Other options available - consult part numbering guide.

Cl. I, Div. 2, Groups A, B, C, D

Cl. I, Zone 2

Cl. II, Groups E, F, G

Cl. III

UL Listed & CSA Certified

IECEx / ATEX

Simultaneous Presence

Wet Location, Type 4X, IP66

Champ®FMV LED Series

Floodlight Fixtures

1146-1147.qxp 12/16/2013 7:01 PM Page 1147

1148

Dimensions:

21.0

[532.9]

16.0

[405.9]

6.6

[167.1]

21.75

[552.5]

4.75

[120.7] Ø.55

[14]

Champ®FMV LED Series

Floodlight Fixtures

Cl. I, Div. 2, Groups A, B, C, D

Cl. I, Zone 2

Cl. II, Groups E, F, G

Cl. III

UL Listed & CSA Certified

IECEx / ATEX

Simultaneous Presence

Wet Location, Type 4X, IP66

Catalog Numbering System:

SERIES

FMV NEC version with Class/Division ratings

NFMV IEC version with Class/Zone ratings

LIGHT SOURCE / INTENSITY

5L 100W - 150W equivalent

7L 150W - 175W equivalent

9L 175W - 250W equivalent

11L 250W - 400W equivalent

13L 400W equivalent

COLOR TEMPERATURE

C5600K (cool white)

W3000K (warm white)

MOUNT

YYoke

VOLTAGE

UNV1 100 VAC to 277 VAC 50/60 Hz, 108 VDC to 250 VDC

347 347 VAC 60 Hz

480 480 VAC 60 Hz

OPTICAL DISTRIBUTION

76 Floodlight pattern optics included

SUFFIXES

M20 20mm metric threads for conduit opening (NFMV only)*

M25 25mm metric threads for conduit opening (NFMV only)*

S658 Fused; for UNV1 only; not for marine or cUL

S886 Two conduit/cable glands of like thread installed

*Required for NFMV. Please specify conduit entry.

SERIES LIGHT

SOURCE COLOR MOUNT VOLTAGE OPTICAL

DISTRIBUTION SUFFIXES

FMV 9L C Y /UNV1 76 S658

ADDITIONAL ITEMS (SOLD SEPARATELY)

DSV1 DSV dark sky visor

P61 Wire guard factory installed

SFA6 Floodlight slipﬁtter

SWB6 Slipﬁtter wall mount adapter

120 120 VAC 50/60 Hz**

**5 year limited warranty. Refer to page 2 of the D-0413 authorized distributor price book for Eaton’s Crouse-Hinds standard Terms and Conditions.

DesignLights Consortium® approved models. Cool white only.

1148-1149.qxp 12/16/2013 7:43 PM Page 1148

1149

Distance in Feet

Point By Point FC Readings

.35 Fc

MULTIPLIERS FOR OTHER LED FLOODLIGHTS

FMV 13L @ 40 Ft. High; Tilt Angle = 45 Degrees

(Isofootcandles)

Luminaire

Series Wattage Lumens*

FMV 5L 64 4386

FMV 7L 89 6720

FMV 9L 121 8478

FMV 11L 149 10420

*FMV 13L output is 12,940.

.5 Fc 1 Fc 2 Fc 2.5 Fc

Weights:

Model Lbs. Kg.

5L 39.11 17.74

7L 39.16 17.76

9L 39.73 18.02

11L 40.35 18.30

13L 40.35 18.30

Ambient Temperature:

Max. Temp. ºC Cl. I, Div. 2 Cl. I, Zone 2 Simu. Presence Div. 1 and Div. 2 Cl. II, Div. 1 Cl. III

FMV 5L 40 T3C T5 T3A T5 T5

55 T3C T4 - - -

FMV 7L 40 T3C T5 T3A T5 T5

55 T3C T4 - - -

FMV 9L 40 T3C T5 T3A T5 T5

55 T3C T4 - - -

FMV 11L 40 T3C T5 T3A T5 T5

55 T3C T4 - - -

FMV 13L 40 T3C T5 T3A T5 T5

55 T3C T4 - - -

Photometric Data:

Cl. I, Div. 2, Groups A, B, C, D

Cl. I, Zone 2

Cl. II, Groups E, F, G

Cl. III

UL Listed & CSA Certified

IECEx / ATEX

Simultaneous Presence

Wet Location, Type 4X, IP66

Champ®FMV LED Series

Floodlight Fixtures

1148-1149.qxp 12/16/2013 7:43 PM Page 1149

84287 Catalog

Navigation menu

Versions of this User Manual:

Views

Navigation