06200335_011

: Pdf 88470-Attachment 88470-Attachment 011011 Batch12 unilog

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

2598 8/16-Point
AC Discrete Output Module
Specifications
Outputs per Module: 8 or 16
Isolation: 2100 VAC channel-to-backplane
3000 VAC group-to-group
Output Voltage: 11 VAC to 240 VAC

The 2598 was designed to be primarily a 16pt module. However, in order to provide maximum flexibility for the user,
it may also be configured as an 8 point module. Some details are listed below to help the user better understand
the jumper settings and PCB labeling discrepancies for the 8 point setting.
8 Point Mode: Move jumper in “Login” box to location JP3 to choose 8pt mode. Ensure the Isolation jumpers
J2,4,5, & 6 are in ‘8 Common’ positions to correspond to the Siemens® counterpart 8 point modules (2 inputs/
common). Also, note that many of the printed channels (CH 1-CH 32) on the PC board are no longer valid, nor
are the front panel connector labels. (You may find it helpful to utilize the appropriate 8 pt. connector labels
shipped with the product.) If 8 Point is enabled, the following table’s 8pt. row is the new correlation of PC board
printing and front panel label’s LED area printing. For example, in 8 Point Login Configuration, the board marking
for channel 10 (CH 10) would be the input channel 6. Likewise, the PC board marking for CH 13 would correlate
to input channel 7.
Login
Mode

Channel/Fuse Labeling

32 pt: 1 2
16 pt: 1

2

8 pt: 1 2

3

4

5

6

3

4

-

-

-

-

-

-

7
-

8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

-

5

6

7 8

-

-

3

4

-

-

-

-

-

-

9 10 11 12 -

-

-

-

-

-

5

-

-

-

6 -

-

-

13 14 15 16 7

8

-

-

-

-

-

-

-

-

-

Note: For CTI Limited Product Warranty and RMA procedures please go to www.controltechnology.com/support.htm.

for Class 1 Div 2 locations:
2A per point @ 50C
1.5A per point @ 60C
Maximum Surge Current: 3 Amps for 15 Sec
“ON” State Voltage Drop: 1.0 V @ 1.0 Amp

Product Bulletin

8/16 Point Configuration Explanation

2500 Series PLC System

Maximum Output Current:
2A per point
8A per group
32A per module (16pt login)

Description

“OFF” State Leakage Current: 1 mA @ 120 VAC

The 2598 8/16-Point AC Discrete Output
Module provides eight or sixteen outputs from
CTI 2500 Series or Simatic® 505 I/O bases.
The module utilizes solid-state output circuits to
switch on or off external devices such as pilot
lamps, motor starters, or solenoids. The 2598 is
designed to switch externally supplied 11 to 240
VAC. The internal logic signals are isolated from
the external outputs to 2100 VDC.

Turn On Time: 1 AC cycle
Turn Off Time: 1 AC cycle
Fuses: 16, 2.5 amp, 250V,
Type Littlefuse #21602.5,
Bussman GDA-2.5, (Field replaceable)
Connector: Removable
Wire Gauge: 14 - 22 AWG
Backplane Power: 1.25 Watts max.

Features
8 or 16 AC output points
Replaces Siemens® 505-4608, -4616,
-4808, -4816
3000 VDC group-to-group isolation
2100 VDC channel-to-backplane isolation
Isolation in groups of four (16pt. login) or in
groups of two (8pt. login)
Wide 11-240 VAC output range
2.0 Amps per output
Individually fused outputs
Sourcing outputs
Single-wide module

Module Size: Single-wide
Operating Temperature: 0o to 60oC
(32o to 140oF)
Storage Temperature: -40o to 85oC
(-40o to 185oF)
Relative Humidity: 5% to 95%
(non-condensing)
Agency Approvals:
UL, UL-Canada, Class 1, Div 2, CE
Shipping Weight: 1.5 lb. (0.68 Kg)

Control Technology Inc.
Copyright© 2006 Control Technology Inc.

All Rights Reserved

5734 Middlebrook Pike, Knoxville, TN 37921-5962
Phone: 865/584-0440
Fax: 865/584-5720 www.controltechnology.com

AC

AC
AR

AR

A5

A5
A1

A1

A6

A6
A2

A2

A7

A7
A3

A3

A8

A8
A4

A4

BC

BC

BR

BR

B5

B5

B1

B1

B6

B6

B2

B2

B7

B7

B3

Not Applicable:
See explanation
in section on
back page
B3

Not Applicable:
See explanation
in section on
back page
B8

B8

B4

B4

CC

CC

CR

CR

C5

C5

C1

C1

C6

C6

C2

C2

C7

C7

C3

C3

C8

C8

C4

C4

DC

DC

DR

DR

D5

D5

D1

D1

D6

D6

D2

D2

D7

D7

D3

D3

D8

D8

D4

D4

8 Pt Login
Selection Jumper in
4 Common Position
AC

Not Used
Channel 1
Channel 2
Not Used
Not Used
Not Used
Channel 3
Channel 4
Not Used
Not Used
Not Used
Channel 5
Channel 6
Not Used
Not Used
Not Used
Channel 7

AR
A5
A1
A6
A2
A7
A3
A8
A4
BC
BR
B5
B1
B6
B2
B7
B3
B8
B4
CC
CR
C5
C1
C6
C2
C7
C3
C8
C4
DC
DR
D5
D1
D6
D2

Channel 8
Not Used
Not Used

D7
D3
D8
D4

User Pwr AC(+)
Channels 1-2
Not Used
Not Used
Not Used
Not Used
User Pwr AC(+)
Channels 3-4
Not Used
Not Used
Not Used
Not Used
User Pwr AC(+)
Channels 5-6
Not Used
Not
Not Used
Not Used
User Pwr AC(+)
Channels 7-8
Not Used
Not Used
Not Used
Not Used

8 Pt Login
Selection Jumper in
8 Common Position

Figure 3. Jumper and Fuse Configuration
(see chart on back for actual channel correlations)

16 Pt Login
Selection Jumper in
4 Common Position
AC

Not Used
Channel 1
Channel 2
Channel 3
Channel 4
Not Used
Channel 5
Channel 6
Channel 7
Channel 8
Not Used
Channel 9
Channel 10
Channel 11
Channel 12
Not Used
Channel 13
Channel 14
Channel 15
Channel 16

AR
A5
A1
A6
A2
A7
A3
A8
A4
BC
BR
B5
B1
B6
B2
B7
B3
B8
B4
CC
CR
C5
C1
C6
C2
C7
C3
C8
C4
DC
DR
D5
D1
D6
D2
D7
D3
D8
D4

User Pwr AC (+)
Channels 1-4
Not Used

Standard Shipping Configuration
Jumper

Not Used
Not Used
Not Used
User Pwr AC (+)
Channels 5-8
Not Used

Not Used
User Pwr AC (+)
Channels 9-12
Not Used

J2, J4, J5, J6

8 Common

JP 2, 3

JP2 - 16 pt. Login

Table 1. Jumper Configuration Table

Not Used
Not Used

Jumper Configuration
Selection

WARNING:
Do not alter ‘8 COMMON’ jumper J2, 4, 5, and 6 settings. The module is configured
as needed for proper wiring compatibility with its Siemens® counterpart. Remove
the module from the 505 base before changing LOGIN jumper JP2 and 3 settings.

Not Used
Not Used
Not Used
User Pwr AC (+)
Channels 13-16
Not Used
Not Used
Not Used
Not Used

16 Pt Login
Selection Jumper in
8 Common Position*

*Note: Due to a new rev ‘C’ 2598/99 PCB, the 16pt login above differs from the former ‘B’ rev
PCB. The one above is 100% Siemens® compatible

Grouping Configuration
The 2598 is shipped to allow four channels to be grouped and share a common field user power, thereby
allowing a different user power supply voltage to be used by each grouping. Jumpers J2, J4, J5, and J6
come
set in the “8 Common” selection from the factory and should not be altered for proper module operaton.
This setting allows for 4 points per common operation.
For example, Channels 1-4 will share a common user power and Channels 5-8 will share another common user power. In this example each group of four channels is isolated from the other group of four
channels. Because each group of four is isolated, the user may also change the supply voltage for each
group. So, in this example, Channels 1-4 could be 240VAC outputs and Channels 5-8 could be 120VAC
outputs.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Modify Date                     : 2007:01:10 10:41:23-05:00
Create Date                     : 2007:01:10 10:41:19-05:00
Author                          : rpeck559
Subject                         : 06200335_011
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:36f7d66e-8888-4523-ad1f-4ee3e6abfe8c
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Keywords                        : 
Creator Tool                    : Adobe PageMaker 7.0
Document ID                     : uuid:316a93ce-3518-4edb-a315-fb67a778ff6f
Format                          : application/pdf
Title                           : 06200335_011
Creator                         : rpeck559
Description                     : 06200335_011

EXIF Metadata provided by EXIF.tools