Lay In NEMA Type 12 Wireway
2014-10-22
: Pdf 88801-Attachment 1 88801-Attachment_1 Batch9 unilog
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
L ay-In Wireway Lay-In NEMA Type 12 Wireway Bulletin f10 NEMA Type 12 Nipple Available in lengths of 1.00 in. (25mm), 2.00 in. (51mm) and 3.00 in. (76mm). Catalog Number A x B x C in. (mm) F22LN1 2.50 x 2.50 x 1.00 (64 x 64 x 25) 2.50 x 2.50 x 2.00 (64 x 64 x 51) 2.50 x 2.50 x 3.00 (64 x 64 x 76) 4.00 x 4.00 x 1.00 (102 x 102 x 25) 4.00 x 4.00 x 2.00 (102 x 102 x 51) 4.00 x 4.00 x 3.00 (102 x 102 x 76) 6.00 x 6.00 x 1.00 (152 x 152 x 25) 6.00 x 6.00 x 2.00 (152 x 152 x 51) 6.00 x 6.00 x 3.00 (152 x 152 x 76) F22LN2 F22LN3 F44LN1 F44LN2 F44LN3 F66LN1 F66LN2 F66LN3 NEMA Type 12 Drop Hanger Hangers are used to support a wireway run. The drop hanger is normally attached to an overhead beam or ceiling. Sealing Plates, Type Sealing Plates, Qty. Special 1 Special 1 Special 1 Special 1 Special 1 Special 1 Special 1 Special 1 Special 1 Catalog Number S (in.) S (mm) T (in.) T (mm) F22HD F44HD F66HD F88HD 9.25 11.75 15.25 20.56 235 298 387 522 4.50 6.00 8.12 12.12 114 152 206 308 Wireway and Trough NEMA Type 12 Bracket Hanger Hangers are used to support a wireway run. The bracket hanger can be used for wall, floor, or ceiling installations. Subject to change without notice Catalog Number P (in.) P (mm) R (in.) R (mm) U (in.) U(mm) F22HB F44HB F66HB F88HB 4.62 6.12 8.25 10.25 117 155 210 260 3.62 3.62 3.62 3.62 92 92 92 92 4.38 5.88 7.88 11.25 111 149 200 286 PH 763 422 2211 • FX 763 422 2600 • hoffmanonline.com © 2008 Hoffman Enclosures Inc. 9 L ay-In Wireway Lay-In NEMA Type 12 Wireway Bulletin f10 Application Finish Designed to protect electrical wiring from dust, dirt, oil, and water. All straight sections and fittings are completely open on one side, so wires and cables can be laid in along an entire wireway run. No “pulling-through” of wires or cables is required with this design. A complete selection of sections and fittings is available in five sizes: 2.50 in. x 2.50 in. (64mm x 64mm) 4.00 in. x 4.00 in. (102mm x 102mm) 6.00 in. x 6.00 in. (152mm x 152mm) 8.00 in. x 8.00 in. (203mm x 203mm) 12.00 in. x 6.00 in. (305mm x 152mm) ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces. Box connector is gray ANSI 61 and “LSGQR” sealing plate and quick-release latches are plated. UL 870, File No. E27524 NEMA/EEMAC Type 12 JIC standards EGP-1-1967 and EMP-1-1967 CSA, File No. 42184, Type 1 IEC 60529, IP54 Accessories Construction Touch-Up Paint (ATPPY61) Wireway and Trough • 14 gauge steel covers and bodies • 10 gauge steel end flanges • Seams continuously welded and ground smooth; no holes or knockouts • Smooth, rounded edges on all sections and fittings prevent damage to insulation • Heavy butt hinges and strong latches assure complete seal between covers and bodies • Quick-release cover latches permit immediate access to wireway interior • Oil-resistant gasket and adhesive • Solid oil-resistant gasket positioned between flanges when sections and fittings are bolted together • Gasketed quick-release sealing plate provides complete sealing at each joint Subject to change without notice Industry Standards Modification Services Program You can customize this product to your unique requirements by specifying from these options: • Over 100 standard finish colors and textures To order, contact your local Hoffman sales representative. NOTE: For information about modifications outside the scope of the Modification Services program, contact your Hoffman sales representative. PH 763 422 2211 • FX 763 422 2600 • hoffmanonline.com © 2008 Hoffman Enclosures Inc. 1 L ay-In Wireway Lay-In NEMA Type 12 Wireway Bulletin f10 Catalog Number Selection Matrix Lay-In NEMA Type 12 Wireway Description Sealing Platesa Type Qty. 6.00 inch (152mm) Straight Section Flat 1 12.00 inch (305mm) Straight Section Flat 1 24.00 inch (610mm) Straight Section Flat 1 36.00 inch (914mm) Straight Section Flat 1 48.00 inch (1219mm) Straight Section Flat 1 60.00 inch (1524mm) Straight Section Flat 1 120.00 inch (3048mm) Straight Section Flat 1 Cutoff Fitting, Lay-In Flat 1 Cutoff Fitting, Not Lay-In 90° Angle 1 Telescope Fitting, Lay-In Special 1 Cross Fitting Flat 3 90° Elbow, top opening Flat 1 90° Elbow, inside opening Flat 1 90° Elbow, outside opening Flat 1 90° Elbow, outside top opening Flat 2 45° Elbow, top opening Flat 1 45° Elbow, inside opening Flat 1 45° Elbow, outside opening Flat 1 Tee Fitting, top opening Flat 2 Tee Fitting, outside top opening Flat 2 Junction Box Flat 1 Closure Plate 90° 1 Box Connector 90° 1 Reducer 4.00 x 4.00 to 2.50 x 2.50 (102 x 102) to (64 x 64) None 0 6.00 x 6.00 to 4.00 x 4.00 (152 x 152) to (102 x 102) None 0 8.00 x 8.00 to 6.00 x 6.00 (203 x 203) to (152 x 152) None 0 12.00 x 6.00 to 6.00 x 6.00 (305 x 152) to (152 x 152) None 0 12.00 x 6.00 to 4.00 x 4.00 (305 x 152) to (102 x 102) None 0 2.50 x 2.50 64 x 64 F22L06 c, d F22L12c, d F22L24c, d F22L36 c, d F22L48c, d F22L60c, d F22L120c, d F22LXL F22LX F22LA F22LCc, d F22LE9Ac, d F22LE9Bc, d F22LE9Cc, d — F22LE45Ac, d F22LE45Bc, d 4.00 x 4.00 102 x 102 F44L06 c, d F44L12c, d F44L24 c, d F44L36 c, d F44L48 c, d F44L60c, d F44L120c, d F44LXL F44LX F44LA F44LCc, d F44LE9Ac, d F44LE9Bc, d F44LE9Cc, d F44LE9ACd F44LE45Ac, d F44LE45Bc, d 6.00 x 6.00 152 x 152 F66L06 c, d F66L12c, d F66L24 c, d F66L36 c, d F66L48c, d F66L60c, d F66L120c, d F66LXL F66LX F66LA F66LCc, d F66LE9Ac, d F66LE9Bc, d F66LE9Cc, d F66LE9ACd F66LE45Ac, d F66LE45Bc, d 8.00 x 8.00 203 x 203 F88L06 c, d F88L12c, d F88L24 c, d F88L36 c, d F88L48c, d F88L60c, d F88L120c, d F88LXL F88LX F88LA F88LCc, d F88LE9Ac, d F88LE9Bc, d F88LE9Cc, d F88LE9ACd, d F88LE45Ac, d F88LE45Bc, d 12.00 x 6.00 305 x 152 F126L06 c, d F126L12c, d F126L24 c, d F126L36 c, d F126L48 c, d F126L60c, d F126L120c, d F126LXL F126LX F126LA F126LCc, d F126LE9Ac, d F126LE9Bc, d F126LE9Cc, d — F126LE45Ac, d — F22LE45Cc, d F22LTAc, d F22LTCc, d F22LJc, d F22LP F22LB — — — — — F22LN1c, d F22LN2c, d F22LN3c, d F22HD F22HB F22LKTc, d F22LKOKTc, d F22LE9KTc, d F22LE9KOKTc, d — — F44LE45Cc, d F44LTAc, d F44LTCc, d F44LJc, d F44LP F44LB F44LRE22c, d — — — — F44LN1c, d F44LN2c, d F44LN3c, d F44HD F44HB F44LKTc, d F44LKOKTc, d F44LE9KTc, d F44LE9KOKTc, d F44BK60 F44B360 F66LE45Cc, d F66LTAc, d F66LTCc, d F66LJc, d F66LP F66LB — F66LRE44 c, d — — — F66LN1c, d F66LN2c, d F66LN3c, d F66HD F66HB F66LKTc, d F66LKOKTc, d F66LE9KTc, d F66LE9KOKTc, d F66BK60 F66B560 F88LE45Cc, d F88LTAc, d F88LTCc, d F88LJc, d F88LP F88LB — — F88LRE66 d — — — — — F88HD F88HB — — F88LE9KTc, d F88LE9KOKTc, d F88BK60 — — F126LTAc, d — — F126LP F126LB — — — F126LRE66 c, d F126LRE44 c, d — — — — — — — — — F66BK60 — 1.00” (25mm) Nipple Special 1 2.00” (51mm) Nipple Special 1 3.00” (76mm) Nipple Special 1 Drop Hanger None 0 Bracket Hanger None 0 Clockwise Transposition Section Flat 1 Counterclockwise Transposition Section Flat 1 90° Elbow, Clockwise Transposition Flat 1 90° Elbow, Counterclockwise Transposition Flat 1 Barrier Kit, bolt-on Each barrier 60.00” (1524mm) None 0 Barrier, bracket-mountedb Each barrier 60.00” (1524mm) — 1 pkg. (5 pcs.) Barrier Brackets, 2 compartmentb — 1 pkg. — (5 pcs.) F44BB2C F66BB2C — — Barrier Brackets, 3 compartmentb — 1 pkg. — (5 pcs.) F44BB3C F66BB3C — — Flat Sealing Platea — — F44LSGQR F44LSAG F66LSGQR F66LSAG F88LSGQR F88LSAG F126LSGQR F126LSAG 90° Angle Sealing Platea — — a Each sealing plate also includes one gasket and one set of screws to join sections. b Package consists of five barriers or five brackets. Each barrier is 60 inches long. c Certified by Canadian Standards Association. d UL 870 F22LSGQR F22LSAG See Technical Information chapter or www.hoffmanonline.com for Wireway Fill Table 2 Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • hoffmanonline.com © 2008 Hoffman Enclosures Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Modify Date : 2009:06:22 09:42:33+05:30 Create Date : 2009:06:22 09:42:19+05:30 Title : Lay-In NEMA Type 12 Wireway Author : Hoffman Page Count : 3EXIF Metadata provided by EXIF.tools