Aal Aln440 Spec

: Pdf Aal Aln440 Spec aal_aln440_spec spec products aal

Open the PDF directly: View PDF .
Page Count: 2

| 1 |

ALN440 – Towne Commons®

ARCHITECTURAL AREA LIGHTING

16555 East Gale Ave. | City of Industry | CA 91745

P 626.968.5666 | F 626.369.2695 | www.aal.net

Copyright © 2012 | Rev 2.15

TYPE

• Hinged top for easy relamping

• Unitized one-piece lens with a one-piece memory retentive

silicone gasket provides a sealed fixture as well as easy

lens replacement

• Tool-less access to the ballast module and quick

disconnects for easy servicing

• Four distribution patterns

• Powder coat finish in 13 standard colors with a polymer

primer sealer

1. LUMINAIRE 2. LAMP/BALLAST 3. COLOR 4. OPTIONS 5. CONTROL 6. MOUNTING

1. LUMINAIRE

ARM OR POST TOP MOUNT

Clear acrylic lens, coated lamp

ALN 440-C

Clear lens, glass refractor

ALN 440-GR3 (Type 3) ALN 440-GR5 (Type 5)

Clear lens, horizontal cutoff reflector

ALN 440-H2 (Type 2) ALN 440-H3 (Type 3)

ALN 440-H4 (Type 4) ALN 440-H5 (Type 5)

TOP MOUNTED ARM OR PENDANT MOUNT

Clear acrylic lens, coated lamp

ALN 440D-C

Clear lens, glass refractor

ALN 440D-GR3 (Type 3) ALN 440D-GR5 (Type 5)

Clear lens, horizontal cutoff reflector

ALN 440D-H2 (Type 2) ALN 440D-H3 (Type 3)

ALN 440D-H4 (Type 4) ALN 440D-H5 (Type 5)

2. LAMP/BALLAST

COMPACT FLUORESCENT (120 thru 277 volt)

GE F57QBX lamp. Reflector models only

PL57

GE F70QBX lamp. Reflector models only

PL70

METAL HALIDE (120/208/240/277)

Medium base, ED-17 lamp

50MH 70MH 100MH 

G12 base, T-6 ceramic lamp

70MHT6

PULSE START METAL HALIDE (120/208/240/277 volt ballast)

Medium base, ED-17 lamp

150PSMH

G12 base, T-6 ceramic lamp

150PSMHT6

HIGH PRESSURE SODIUM (120/208/240/277 volt ballast)

Medium base, ED-17 lamp

50HPS 70HPS 100HPS 150HPS

All ballasts are factory wired for 277 volts, unless specified. Lamps not

included.

SPECIFICATIONS

HOUSING

The fixture shall be cast A356 alloy aluminum, free

of any porosity or cosmetic fillers. Castings shall

be of uniform wall thickness, minimum .188" with

no warping or mold shifting.

The top shall hinge open by loosening two

captive fasteners. The top shall seal the lamp

compartment with a full surround silicone gasket.

The lens shall be one-piece clear optical grade

acrylic with a one-piece memory retentive silicone

gasket on top and bottom. The ballast assembly

shall be accessible by turning two spring

loading latches, to lift out the ballast module.

Quick disconnects shall be used for all electrical

connections. All internal and external hardware

shall be stainless steel.

OPTICAL MODULE

REFLECTORS: The optical assembly shall be

completely sealed with a one-piece memory

retentive silicone gasket to prevent dust, insect, or

moisture contamination. The reflector module shall

consist of segmented, specular and semi specular

Alzak® panels precisely formed and positioned

within the housing on a carrier plate. Reflector

models shall be IES rated as a cutoff luminaire.

REFRACTORS: The GR3 and GR5 shall be

precision molded borosilicate glass refractors with

a Type 3 or Type 5 distribution. The refractors shall

be mounted to a gasketed aluminum holder with

an internal pressure plate

ALN440-H3-CHM

4. OPTIONS

CHM (Glass chimney with polished brass holder. Reflector

models only)

CND (3-lamp candelabra with polished brass holder, lamps

included. For decorative use only. Reflector models only)

LDL (Lightly diffused lens for fixtures with a refractor or reflector)

HSS-L (House side shield for use with glass refractors or clear

lens only, consists of three field installed panels attached to the

inside of the lens. Installing three panels blocks 180° of the lens.

Not available with PL ballast options)

HSS-R (House side shield for use with horizontal reflectors.

Factory installed. Not for Type 5)

QL (Socket for T-4 mini-cand lamp, field wired to a separate

circuit. QL lamp wattage not to exceed primary lamp wattage.

Reflector models only)

QRS

(Restrike controller and T-4 socket for quartz lamp.

Configured to light following resumption of power until HID reaches

full brightness. Lamp wattage not to exceed ballast wattage.)

MAT (Mast arm adapter slips over a 2 3/8"/60mm O.D. pipe and

is secured with 4 stainless steel set screws. For ALN440D only)

PMS (Pendant mount with 48"/1220mm stem and canopy with

swivel. For ALN440D only)

PMC (Pendant kit includes canopy and 48"/1220mm of brass

chain. For ALN440D only)

PT5 (Post top adaptor for a 5"/127mm O.D. pole)

 347 (120/277/347 volt for HID ballasts)

5. CONTROL

SCP (Programmable motion control, factory default is 50%,

requires pole)

PCA-C (Rotatable photocell-Contemporary)

6. MOUNTING

WALL MOUNT

WMA1M WMA1L WMA2M WMA2L

WMA3 WMA35U WMA36U WMA7

WMA38 WMA39 WMA4 WMA55

WMA56 WMA57 WMA6 WMA7

WMA8 WMA9D WMA9U WMA10

WMA11 WMA12 WMA16 WMA17

WMA18 WMA22D WMA22U

POLE MOUNT

TRA1M TRA1L TRA2M TRA2L

TRA3 TRA4 TRA5U TRA6U

TRA55 TRA56 TRA57 TRA7

TRA7-2 TRA8 TRA8-2 TRA9

TRA9-2

SLA1 SLA1-2 SLA3 SLA4

SLA4-2 SLA7 SLA7-2

SLA7(5) SLA7(5)-2

SLA8U SLA8D

SLA9SLA9-2 SLA10 S L A16

SL A16-2 S L A17 SL A17-2 S L A18

SLA18-2 SLA22D SLA22U

PENDANT

PM1 PM2 PM3

See next page

JOB

TYPE

NOTES

3. COLOR

WH Arctic White

BL Black

BLT Matte Black

DGN Dark Green

DB Dark Bronze

WDB Weathered Bronze

MDB Bronze Metallic

VBU Verde Blue

CRT Corten

MAL Matte Aluminum

MG Medium Grey

AGN Antique Green

LG Light Grey

RAL Premium Color

CUSTOM * * Contact Factory

| 2 |

ALN440 – Towne Commons®

ARCHITECTURAL AREA LIGHTING

16555 East Gale Ave. | City of Industry | CA 91745

P 626.968.5666 | F 626.369.2695 | www.aal.net

Copyright © 2012 | Rev 2.15

TYPE

ELECTRICAL

Ballasts shall be high power factor rated for -30°C starting.

The ballast shall be mounted to a cast holder for maximum

heat dissipation. Medium base, porcelain sockets shall

be pulse rated. The compact fluorescent shall have an

electronic transformer, 120 thru 277 volt. High output

fluorescent lamps shall be powered by an electronic ballast

and shall be rated for a minimum starting temperature

of -10°C. The electrical assembly shall be installed and

prewired in the fixture.

RELAMPING

The top of the fixture shall hinge open for relamping by

loosening two stainless steel fasteners.

MOUNTING

Post top mounting: The fixture shall slip over a 4"/100mm

O.D. pole or tenon and be secured to the pole with three (or

six) stainless steel set screws.

Arm or wall mounting: The fixture shall be attached to the

cast arm with three stainless steel bolts and a silicone

gasket.

FINISH

Fixture finish shall consist of a five stage pretreatment

regimen with a polymer primer sealer, oven dry off and

top coated with a thermoset super TGIC polyester powder

coat finish. The finish shall meet the AAMA 2604-02

performance specification which includes passing a 3000

hour salt spray test for corrosion resistance.

CERTIFICATION

Fixtures shall be listed with ETL for outdoor, wet location

use, conforming to the UL 1598 and Canadian CSA 22.2

no. 250 standard.

WARRANTY / TERMS AND CONDITIONS OF SALE

Download:

http://www.hubbelllighting.com/resources/warranty/

AAL reserves the right to change product specifications without notice

.

ALN440 H3 100MH WATTAGE: 129 LUMEN OUTPUT: 5705 EFFICACY: 44.2 Lm/W

14' MOUNTING HEIGHT

UPLIGHT 2.0%

DOWNLIGHT 59.4%

B2 U3 G2

FORWARD LIGHT LUMEN

FL 30o 3.5% 198

FM 60o 30.3% 1727

FH 80o 30.8% 1755

FVH 90o 0.9% 49

BACK LIGHT

BL 30o 3.0% 174

BM 60o 17.2% 984

BH 80o 9.6% 549

BVH 90o 1.5% 88

UPLIGHT

UL 100o 1.1% 61

UH 180o 2.1% 121

ALN440 H5 100MH WATTAGE: 129 LUMEN OUTPUT: 5751 EFFICACY: 44.6 Lm/W

14' MOUNTING HEIGHT

UPLIGHT 2.6%

DOWNLIGHT 59.3%

B3 U3 G3

FORWARD LIGHT LUMEN

FL 30o 3.8% 219

FM 60o 23.4% 1349

FH 80o 18.1% 1043

FVH 90o 1.3% 73

BACK LIGHT

BL 30o 3.7% 211

BM 60o 24.4% 1404

BH 80o 19.7% 113 0

BVH 90o 1.5% 85

UPLIGHT

UL 100o 1.2% 70

UH 180o 2.9% 169

IES files can be found at www.aal.net

DIMENSIONS

POST TOP

The standard cast fitter slips

over a 4"/100mm O.D. pole.

WT: 42 lbs EPA: 2.16

ARM MOUNT

18"/460mm DIA x 28"/710mm

WT: 40 lbs EPA: 2.16

ALN 440

ALN 440D

18"/460mm

32"

815mm

18"/460mm

28"

710mm

Photometric Report

Wednesday, July 11, 2012

CATALOG NUMBER: ALN 440-H3 100MH

FILENAME: ALN 440-H3 100MH.IES

IESNA:LM-63-2002

[TEST] LRL 599-2B

[TESTLAB] LRL

[MANUFAC] ARCHITECTURAL AREA LIGHTING

[LUMCAT] ALN 440-H3 100MH

[LUMINAIRE] HEXAGONAL CAST ALUMINUM HOUSING,

[MORE] SEGMENTED, SEMI-SPECULAR/HAMMERTONE

[MORE] ALZAK REFLECTOR. TOP OF FIXTURE

[MORE] HINGES FOR RELAMPING. CORROSION

[MORE] RESISTANT POLYESTER POWDER COAT FINISH.

[MORE] HORIZONTAL LAMP. TYPE III REFLECTOR.

[LAMPCAT] MH100/U/M

[LAMP] ONE 100 WATT MEDIUM BASE E-17 CLEAR METAL HALIDE

SUMMARY DATA

% 7.16 :)latoT( YCNEICIFFE

EFFICIENCY (Down / Up): 59.7 % / 2.0 %

EFFICIENCY (Street / House): 41.2 % / 20.4 %

ROADWAY CLASSIFICATION: TYPE III, SHORT

CUTOFF CLASSIFICATION: SEMICUTOFF

0039 :PMAL/SNEMUL

1 :SPMAL FO .ON

LUMINOUS OPENING: CIRCULAR

Diameter: 1.50 (Feet)

921 :STTAW TUPNI

ISO-ILLUMINANCE DIAGRAM (fc)

0.01

0.02

0.05

0.1

0.2 0.51.

Mounting Height = 20 Feet. Each box represents one mounting height.

Mounting

Height Multiplier

----------- --------------

10 4.000

15 1.778

20 1.000

25 0.640

30 0.444

35 0.327

40 0.250

45 0.198

50 0.160

+ = Point of max candela

Reported data calculated from manufacturer's data file, based on IESNA recommended methods.

Photometric Viewer v3.4

Photometric Report

Wednesday, July 11, 2012

CATALOG NUMBER: ALN 440-H5 100MH

FILENAME: ALN 440-H5 100MH.IES

IESNA:LM-63-2002

[TEST] LRL 599-2D

[TESTLAB] LRL

[MANUFAC] ARCHITECTURAL AREA LIGHTING

[LUMCAT] ALN 440-H5 100MH

[LUMINAIRE] HEXAGONAL CAST ALUMINUM HOUSING,

[MORE] SEGMENTED, SEMI-SPECULAR/HAMMERTONE

[MORE] ALZAK REFLECTOR. TOP OF FIXTURE

[MORE] HINGES FOR RELAMPING. CORROSION

[MORE] RESISTANT POLYESTER POWDER COAT FINISH.

[MORE] HORIZONTAL LAMP. TYPE V REFLECTOR.

[LAMPCAT] MH100/U/M

[LAMP] ONE 100 WATT MEDIUM BASE E-17 CLEAR METAL HALIDE

SUMMARY DATA

% 2.26 :)latoT( YCNEICIFFE

EFFICIENCY (Down / Up): 59.6 % / 2.6 %

EFFICIENCY (Street / House): 30.3 % / 31.9 %

ROADWAY CLASSIFICATION: TYPE III, SHORT

CUTOFF CLASSIFICATION: CUTOFF

0039 :PMAL/SNEMUL

1 :SPMAL FO .ON

LUMINOUS OPENING: CIRCULAR

Diameter: 1.50 (Feet)

921 :STTAW TUPNI

ISO-ILLUMINANCE DIAGRAM (fc)

0.01

0.02

0.05

0.1

0.2

0.5

1.

Mounting Height = 20 Feet. Each box represents one mounting height.

Mounting

Height Multiplier

----------- --------------

10 4.000

15 1.778

20 1.000

25 0.640

30 0.444

35 0.327

40 0.250

45 0.198

50 0.160

+ = Point of max candela

Reported data calculated from manufacturer's data file, based on IESNA recommended methods.

Photometric Viewer v3.4