Arch Cfl 064

2015-04-17

: Pdf Arch Cfl 064 arch_cfl_064 spec products prescolite

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadArch Cfl 064
Open PDF In BrowserView PDF
9" Horizontal Regressed
High Impact Lens Downlight

DATE:	TYPE:

CFT932HEB

PROJECT:

FIRM NAME:

Two 26W, 32W, or 42W Triple
Tube 4-Pin Lamps
Non-IC Rated
120V, 208V, 240V, 277V, or 347V
Featuring

Ceiling Cutout: 913/16"
Maximum Ceiling Thickness: 11/4"
For conversion to millimeters,
multiply inches by 25.4
Not to Scale
Horizontal EMR Dimension 17-3/4"
143/8"

Reflectors

APPLICATIONS:
The CFT932HEB offers a horizontally
lamped compact fluorescent downlight that
provides superior brightness and glare control. The multi-watt, multi-volt ballast provides
the ability to change wattages by simply
changing the lamp. This luminaire is ideal
for a wide variety of medium to high ceiling
applications including commercial, retail, and
hospitality.
HOUSING:
One-piece 18-gauge galvanneal steel platform with friction retaining springs to secure
optical system. Prewired J-box with snap-on
cover for easy below ceiling access. Same
housing accommodates downlight and wall
wash downlight reflectors.
REFLECTOR:
High purity aluminum Alzak Virtual Source®
iridescence suppressed reflector. Self-trim
(ST) standard. Painted white self-trim (WT)
available.
LENS:
High impact CA-81 equivalent acrylic lens.
Lenses are FDA approved for use in food
service areas and UL-94 approved with a
flammability rating of 94HB.

BALLAST:
One (1) compact fluorescent Class ‘P’
electronic mult-ivolt (120V through 277V)
ballast suitable for operating 26W, 32W,
and 42W triple tube lamps. HPF and EOL
protection standard. Accessible from below
ceiling. Note: Dimming option may result
in fixture containing two (2) ballasts. 347V
available (specify wattage when ordering).

153/8"

LAMP:
Two (2) 26W (GX24q-3 base), 32W
(GX24q-3 base), or 42W (GX24q-4 base)
4-pin triple tube compact fluorescent lamps.
Lamps furnished by others or as option
below.
SOCKET:
Two (2) injection molded sockets suitable for
26W, 32W, and 42W triple tube lamps.

143/8"

INSTALLATION:
Universal adjustable mounting brackets accommodate 11/2" or 3/4" lathing channel or
1
/2" EMT (by others), or Prescolite 24" bar
hangers (B24 or B6).

81/2"

LABELS:
UL listed or UL/CSA listed with CDN option
for wet locations. Approved for through
wiring. Non-type I.C.
LAMP INCLUDED OPTION:
Specify lamp type T (Triple 4-pin) and temperature as shown below.

91/4"
105/8"

CATALOG NUMBER:	
HOUSING

HOUSING OPTIONS

EXAMPLE: CFT932HEBDM STF902HCL LP32T30K B24
HOUSING OPTIONS
11

	 REFLECTOR

	7DM
❑	CFT932HEB ❑	CDN
Advance Mark 7 Dimming Ballast to
9", (2)
Canadian electrical
3%, 4-wire (120V–277V) (Specify
26W/32W/42W code compliant ballast
wattage on two lamp housing)
Triple tube, multidisconnect
	XDM3,11
volt electronic ❑	 CDN 347V4
Advance Mark 10 Dimming Ballast to
ballast
	 Canadian electrical 	
5%, 2-wire (specify voltage/wattage)
	 code compliant ballast 	
❑	EMR1,7,8
	disconnect
10
❑	CP
Emergency battery pack with remote
Chicago Plenum Fixture
test switch and indicator light
construction and/or
(required for lensed reflectors)
specifications may vary.
❑	FSDFA
Refer to Chicago Plenum
Fuse kit installed at factory
specification sheets on www. ❑	RIF17,8
prescolite.com for details.
Radio interference filter (single circuit)
	DM
❑	MW26
Electronic Analog Dimming
Max Wattage label, 26W
Ballast to 5%, 4-wire,
❑	MW32
0-10V (120V– 277V)
Max Wattage label, 32W
(Specify wattage on two
❑	SYL3
lamp housing)
Osram Sylvania Ballast (available
	 ECDM5
only for standard EB option)
Lutron EcoSystem or 3-wire
❑	SMT7
line voltage dimming
Philips Advance SmartMate® ballast
ballast (120-277V). Dims
to 5%.
	2DM 1, 2,11
Lutron Tu-Wire Dimming
Ballast to 5%, 2-wire (120
volt only; Specify wattage)
11

A Division of Hubbell Lighting, Inc.

REFLECTOR COLOR

❑	STF902H
	Specular Alzak
or Painted
Option

REFLECTOR FINISH
❑ Blank
Specular
❑	SS
Semi Specular
❑	MFC
American
MatteTM

❑	Blank
Clear Alzak
❑	CG
Champagne
Gold Alzak
❑	PW
Pewter Alzak
❑	BL
Black Alzak
❑	WE
Wheat Alzak
❑	LW
Light Wheat Alzak
Painted Options*

REFLECTOR OPTIONS ACCESSORIES
❑	DL6

❑	B24
Set of two (2) bar
hangers for
❑	CL6
T-bar ceilings
	 Clear Lens
❑	B6
6
❑	PL
Set of two (2) bar
hangers for ceiling joists
	 Prismatic Lens
up to 24" centers
❑	TRG
❑	FSDFI
	 Trim Ring Gasket 	
Fuse kit for field
	 (Factory Installed)
installation
❑	WT
❑	SCA9D_
Sloped ceiling adapter
	 Painted White 	
(see note on
	 Self Flange 	
back page)
	

Diffused Lens

❑	WC-White Cone
❑	BC-Black Cone
*All painted options come standard with
an upper specular clear Alzak reflector.
Remote mount test switch and indicator light for use with lensed trim only.
Not available for 42W
Available for Osram Sylvania Quick 60+® Limited Warranty when used with
Osram lamp(s). See www.prescolite.com for details.
4
Dimming not available for 347V.
5
For 42W specify CFT942HEB and add desired dimming option suffix
6
Regressed reflectors come standard with upper portion of reflector painted white.
7
Not available for 347V
8
Not available with CP option
10
Top access required to service ballast for CP option
11
For 26W, 32W, or 42W CFL lamps specify CFT926HEB or CFT932HEB and add
desired dimming option
1
2
3

In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.

Web: www.prescolite.com

•

Tech Support: (888) 777-4832

LAMP ACCESSORIES
❑	LP_____________
-wattage= 26, 32, 42
-type= T (Triple 4-pin)
-temp= 27K, 30K, 35K,
41K (Kelvin)
*Example: LP32T30K
Requires two lamps.

ARCH-CFL-064

PHOTOMETRIC DATA
BALLAST DATA	
120V 	

	

26W Triple	
277V 	

Architekt¯
u
¯r - 9" Horizontal
Regressed High Impact Lens Downlight - CFT932HEB

347V	

120V 	

Total System Watts	58W	56W	N/A	
Input Current (Amps)	
0.45	0.21		
Input Frequencyin Hz	
50/60	50/60		
Power Factor	
>97%	>97%		
Ballast Factor	
>98%	>98%		
Total Harmonic Distortion	
<10%	<10%		
Minimum Starting Temp.	 -18°C (0°F)	 -18°C (0°F)		

LAMP DATA
Rated Watts	
Rated Lumens	
Efficacy (LPW)	
Rated Life	
CRI	
Minimum Starting Temp.	

32W Triple	
277V	

347V	

74W	72W	N/A	
0.61	0.26		
50/60	50/60		
>97%	>97%		
>98%	>98%		
<10%	<10%		
-18°C (0°F)	 -18°C (0°F)		

32W Triple	

1800	2400	3200
69	75	76
10,000 hours	
10,000 hours	
10,000 hours
82	82	82
0° F	
0° F
0° F	

Lamp: Two 42W Triple
Rated lumens: 3200
Spacing Criteria: 1.1
Efficiency: 46.5%

32W Triple
SPACING	RCR1	 RCR3	 RCR7
	7.0	
52	
44	
33	
	8.0	
40	
34	
25
	9.0	
31	
27	
20
	10.0	
25	
21	
16
	11.0	
21	
18	
13
	12.0	
18	
15	
11
	13.0	
15	
13	
9
	14.0	
13	
11	
8
15.0	 11	10	 7

Room Cavity
Ratio

80%	

	

90
300
600
900
1200

65
55
45

1500

35
15

25

Beam
Test No. 2003109

CANDLEPOWER
CANDLEPOWER SUMSUMMARY
MARY
	Angle	

0°	

45°	

90°

	0	 2018	706	 706
	5	 2047	751	 714
	10	 2109
	15	 2157	 789	 686
	20	 2125	
	25	 1997	 766	 674
	30	 1679
	35	 1204	 575	 516
	40	 748
	45	 438	 121	 77
	50	 261
	55	 182	 0	
0
	60	 60
	
65	
9	0	0
	70	 4
	
75	
2	0	0
	80	 1
	85	 0
	90	 0

	
	 0
	1	
	 2	
	 3	
	 4	
	 5	
	 6	
	 7	
	 8	
	 9	
	10	

Zonal Cavity Method

% Effective Floor Cavity Reflectance

	
	

5

96W	94W	N/A
0.8	 0.35	
50/60	50/60	
>97%	>97%	
>98%	>98%	
<10%	<10%	
-18°C (0°F)	 -18°C (0°F)

COEFFICIENTS OF UTILIZATION 	

CANDLEPOWER
DISTRIBUTION

347V

Assumptions:
1. Multiple units (square array)
2. Ceiling 80%; Wall 50%; Floor 20%
3. Four fixtures evenly spaced in the center of the room
4. The room is square and has a width and length equal to
twice the lamp spacing
5. The lumen depreciation factor is 0.8
6. The dirt depreciation factor is 0.98

42W Triple

CFT932HEB-STF902HCL Clear Alzak Reflector w/clear lens

0

42W Triple
277V	

AVERAGE INITIAL FOOTCANDLES
26W Triple	

LUMINANCE DATA IN CANDELA/SQ. METER	
Angle in 	 Average	
Average	 Average
Vertical	
0° 	
45°	
90°
45°	 15087	7524	 13408
55°	 7728	0	
0
65°	 519	0	 0
75°	 188	0	 0
85° 	
0	
0	
0

1800
2100
2400

120V	

70%	 50%	30%	10%
% Wall Reflectance

70	 50	30	 10	 70	50	 30	 10	 50	 30	10	 50	30	 10	 50	 30	10
	.55	.55	.55	.55	 .54	.54	.54	.54	 .52	.52	.52	 .50	.50	.50	 .47	.47	.47
.53	.51	.50	.49	 .51	.50	.49	.48	 .48	.47	.46	 .46	.46	.45	 .45	.44	.44
.50	.47	.45	.43	 .48	.46	.44	.43	 .45	.43	.42	 .43	.42	.41	 .42	.41	.40
.47	.43	.41	.39	 .46	.43	.40	.38	 .41	.39	.38	 .40	.38	.37	 .39	.38	.36
.44	.40	.37	.35	 .43	.39	.37	.35	 .38	.36	.34	 .37	.35	.34	 .36	.35	.33
.41	.37	.34	.32	 .40	.36	.34	.31	 .36	.33	.31	 .35	.33	.31	 .34	.32	.31
.39	.34	.31	.29	 .38	.34	.31	.29	 .33	.30	.28	 .32	.30	.28	 .32	.30	.28
.37	.32	.29	.26	 .36	.31	.28	.26	 .31	.28	.26	 .30	.28	.26	 .30	.27	.26
.34	.30 	.26	.24	 .34	.29	.26	.24	 .29	.26	.24	 .28	.26	.24	 .28	.26	.24
.33	.28	.25	.22	 .32	.27	.24	.22	 .27	.24	.22	 .26	.24	.22	 .26	.24	.22
.31	.26	.23	.21	 .30	.26	.23	.21	 .25	.23	.21	 .25	.22	.21	 .24	.22	.21

CFT932HEB-STF902HCL

Test No. 2003109

Denotes a Virtual Source reflector.
Refer to www.prescolite.com for additional photometric tests
(IES Files).
When ordering a sloped ceiling adapter, specify the degree of
slope in 5° increments, max. of 35°. For a more precise degree
or wet ceiling applications, please contact factory. Sloped ceiling
adapter and housing must be installed at the same time.

701 Millennium Blvd., Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-064 • 4/16/15

0
.47
.43
.39
.36
.33
.30
.27
.25
.23
.21
.20

NOTES

Web: www.prescolite.com • Tech Support: (888) 777-4832
Copyright ©2015 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved

0%

20% Effective Floor Cavity Reflectance	



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2015:04:16 14:15:29-04:00
Metadata Date                   : 2015:04:16 14:33:28-04:00
Modify Date                     : 2015:04:16 14:33:28-04:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:7192db1d-a56e-fe47-b79f-546f63beba72
Original Document ID            : adobe:docid:indd:c739695a-4185-11e0-922c-8dc183c84f3b
Document ID                     : xmp.id:30dd1e1e-f22e-48e6-861a-e36f07b35a10
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0258862f-5a2c-4c2c-a2f5-02bcbeec41e5
Derived From Document ID        : adobe:docid:indd:c739695a-4185-11e0-922c-8dc183c84f3b
Derived From Original Document ID: adobe:docid:indd:c739695a-4185-11e0-922c-8dc183c84f3b
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:04:16 14:15:29-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
State                           : 1
Version                         : 1.1
Page Count                      : 2
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools

Navigation menu