8073809 Circuit Diagram DW20 00c4.dft Asko Dishwasher DW20.1, .2, .3, .4, .C
2012-10-25
: Pdf Asko Dishwasher Dw20.1, .2, .3, .4, .C Asko_Dishwasher_DW20.1, .2, .3, .4, .C Asko
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
S:\U\Dw20\1_Tryckunderlag\Kopplingsschema\8073809 Circuit diagram DW20.4_c.dft , mall , 2002-06-18 08:34:08 E F A B C 7 8 7 COMPONENT RADIO INTERFERENCE SUPPRESSION FILTER HEATING ELEMENT 1400W 120V HEATING ELEMENT 1800W 230V THERMISTOR COMBINED DISPENSER 120V COMBINED DISPENSER 230V CIRCULATION PUMP 120V 60HZ CIRCULATION PUMP 230V 50HZ CIRCULATION PUMP 220V 60HZ DRAIN PUMP 120V 60HZ DRAIN PUMP 230V 50HZ DRAIN PUMP 230V 60HZ SPRAY ARM DIVIDER 120V 60HZ SPRAY ARM DIVIDER 230V 50/60HZ INLET VALVE SINGLE INCL. FLOW SENSOR 120V INLET VALVE SAFETY INCL. FLOW SENSOR 120V INLET VALVE WATER SOFTNER INCL. FLOW SENSOR 120V INLET VALVE SINGLE INCL. FLOW SENSOR 230V INLET VALVE SAFETY INCL. FLOW SENSOR 230V INLET VALVE WATER SOFTNER INCL. FLOW SENSOR 230V HALOGEN LAMP 5W 12V WAX MOTOR FAN MOTOR 120V FAN MOTOR 230V MS 6 CP HE DR 6 Rev ind Revision RESISTANCE 1 MOHM 12 OHM 30 OHM 25 KOHM 0.3 KOHM 1,3 OHM 22 OHM 90 OHM 56 OHM 25 OHM 150 OHM 85 OHM 2.6 KOHM 8,5 KOHM 0.95 KOHM 0.5 KOHM 0.95 KOHM 3,8 KOHM 2 KOHM 3,8 KOHM <10 KOHM 1.1 KOHM 0.18 KOHM 0,75 KOHM HE RESISTANCES AT ROOM TEMPERATURE (CA. 20°C/68°F) VALUES WITH +/-10% ARE REGARDED AS NORMAL WIRES IN ALL MACHINES INTERNAL CONNECTION WIRES IN SOME MACHINES CD: COMBI DISPENSER CP: CIRCULATION PUMP DIV: WATER DIVERTER VALVE DP: DRAIN PUMP DR: DOOR DS: DOOR SWITCH F: FILTER FM: FLOW METER FN: FAN FS: FLOAT SWITCH HE: HEATING ELEMENT HL: HALOGEN LAMP HS: HUMIDITY SENSOR IS: ILLUM. SWITCH IV: INLET VALVE MS: MAIN SWITCH PS: PRESSURE SENSOR RAS: RINSE AID SENSOR SS: SALT SENSOR SV: SALT VALVE TH: THERMISTOR TS: TURBIDITY SENSOR VAX: VAX ACTUATOR NET: INTERFACE TO HOME NET COMMUNICATION UNIT 8 N F 5 L 5 HS 1 Appd Year Week 3/4 RAS RAS MS HE DS 10 4 DS 3/4 CD CD 2 NET 4 Released by Designed by Scale Material 9 CP CP IV 3 3 Iss by Dept Gen.tol.Angle IV SV SV 4 SS SS 5 DIV M DIV Year 3 41 Week HL 6 HL 2 7 8 TS 1/C 2 PS 1 23 IS Material FM TH TS PS FM TH 2 80 738 09 00 Rev Ind Project Replace KOPPLINGSSCHEMA DW20.1, .2, .3, .4, .C Description(SE) CIRCUIT DIAGRAM DW20.1, .2, .3, .4, .C Description(ENG) Dens.Kg/dm3 Dimensions, Type, etc. Name of item VAX VAX Gen.tolerance FN FN HS UD 00 ASKO CYLINDA ML 1:1 Pos. Qty Part No. FS DP DP 1/C D This document must not be copied without our written pemission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. Asko Cylinda AB 2 1/C 1FORMAT A3 1 A B C D E F S:\U\Dw20\1_Tryckunderlag\Kopplingsschema\8073809 Circuit diagram DW20.4_c.dft , mall , 2002-06-18 08:34:08 E F A B C D This document must not be copied without our written pemission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. Asko Cylinda AB 7 8 7 VARIANT SETTING *ACTIVATE THE SERVICE MENU PRESS START (S2) 3 TIMES WITHIN 5 SECS *FOR DW20.4 HOLD PROGRAM AND START BUTTONS (S1 & S2) TURN ON MAIN SWITCH RELEASE PROGRAM AND START BUTTONS PRESS START (S2) 3 TIMES WITHIN 5 SECS SERVICE MENU TURN OFF MAIN SWITCH WAIT FOR AT LEAST 5 SECS *HOLD PROGRAM AND START BUTTONS (S1 & S2) TURN ON MAIN SWITCH RELEASE PROGRAM AND START BUTTONS (S1 & S2) *FOR DW20.4 HOLD TEMPERATURE/SET AND DRYING/MENU BUTTONS (S3 & S4) TOTAL RESET TURN OFF MAIN SWITCH WAIT FOR AT LEAST 5 SECS HOLD PROGRAM BUTTON (S1) TURN ON MAIN SWITCH RELEASE PROGRAM BUTTON (S1) Panel type DW20.1, L = LED, S = Push-button DW20.1 Displays 8 6 Rev ind Revision 6 5 5 3 2 Appd Year Week 4 Released by Designed by Scale Material Iss by Dept Gen.tol.Angle Year Gen.tolerance 3 41 Week Material 2 80 738 09 00 Rev Ind Project Replace KOPPLINGSSCHEMA DW20.1, .2, .3, .4, .C Description(SE) CIRCUIT DIAGRAM DW20.1, .2, .3, .4, .C Description(ENG) Dens.Kg/dm3 Dimensions, Type, etc. Name of item UD 00 ASKO CYLINDA ML 1:1 Pos. Qty Part No. Press Temperature/Set (S3) to activate the following components: 1. Inlet valve (display shows water intake volume) 2. Salt valve (only machines with water softener) 3. Detergent and surfactant dispenser 4. Circulation pump (display shows turbidity in Volts) 5. Heating element and circulation pump (Max 75°C) 6. Fan (display shows humidity sensor value) 7. Drain pump (display shows pressure sensor reading; 0.5-3.5 VDC) Press Drying/Menu (S4) to access component diagnostics. First enter service menu. DW20.4 DW20.2 and DW20.3 Component test: Press the Programme button (S1) and index through the following components: 1. Inlet valve 2. Salt valve (only machines with water softener) 3. Detergent and surfactant dispenser 4. Circulation pump 5. Heating element and circulation pump (Max 75°C) 6. Fan 7. Drain pump DW20.1 No component test avalible. First enter Service menu. COMPONENT TEST: 4 1FORMAT A3 1 A B C D E F
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:07ac415e-f820-47d1-a404-c4a40395c55f Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2005:04:18 12:47:44-04:00 Modify Date : 2005:04:18 12:47:44-04:00 Metadata Date : 2004:11:03 06:45:10Z Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:8a2afefa-2fbc-4738-a22b-aef7542d3dff Format : application/pdf Creator : pesv Title : 8073809 Circuit diagram DW20-00c4.dft Author : pesvEXIF Metadata provided by EXIF.tools